--- gnome-applets-2.28.0.orig/debian/compat +++ gnome-applets-2.28.0/debian/compat @@ -0,0 +1 @@ +5 --- gnome-applets-2.28.0.orig/debian/copyright +++ gnome-applets-2.28.0/debian/copyright @@ -0,0 +1,30 @@ +This package was debianized by Christian Marillat on +Mon, 31 Jan 2000 13:15:27 +0100. +Taken over by Marc Dequènes (Duck) on 2003-03-28. +Taken over by Guilherme de S. Pastore +on 2005-11-08 + +It was downloaded from http://ftp.gnome.org/pub/GNOME/sources/gnome-applets/ + +Upstream Authors: too many, see '/usr/share/doc/gnome-panel/AUTHORS' + for details + +Copyright: + + This package is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; version 2 dated June, 1991. + + This package is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this package; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, + USA. + +On Debian systems, the complete text of the GNU General +Public License can be found in `/usr/share/common-licenses/GPL-2'. + --- gnome-applets-2.28.0.orig/debian/changelog +++ gnome-applets-2.28.0/debian/changelog @@ -0,0 +1,1537 @@ +gnome-applets (2.28.0-3ubuntu1) lucid; urgency=low + + * Rebase on Debian unstable, remaining changes: + * debian/control.in: + - Don't build depends on libcpufreq-dev, type-handling, + system-tools-backends-dev, libhal-dev, libapm-dev or liboobs-dev. + - Don't build depends on libgstreamer0.10-dev or + libgstreamer-plugins-base0.10-dev (mixed applet disabled) + - Pre-depends on dpkg (required for bzip2 packaging) + - Remove gstreamer0.10-alsa | gstreamer0.10-audiosink depends and + mixer description from gnome-applets (mixer not built) + - gnome-applets suggests gnome-netstatus-applet, deskbar-applet and + cpufrequtils rather than recommends. + * debian/gnome-applet.manpages: + - Don't install mini_commander or mixer manpages + * debian/rules: + - Don't build the mixer, battery status applets + - Don't enable SUID + - Compress package with bzip2 + * debian/watch: + - Add BZR link + - Watch for unstable versions + * 00sticknotes_ui.patch: + - Fix more sticknotes UI problems + * 09_modemlights_use_new_gst.patch: + * 10_network-manager.patch: + - Dropped, modemlights no longer built + * 80_correct_minicommander_install.patch: + - Don't install the minicommander server when not required. + * 81_silent_applet_cleaning: + - Don't display a dialog about the applet configuration cleaning since + that's something which should be transparent for the users + * 86_deprecate_battstatus.patch: + * 87_deprecate_modemlights.patch: + * 88_hide_deprecated_mixer.patch: + - Hide deprecated applets fro the "Add to Panel" dialog + * 98_autoreconf.patch: + - Refreshed + + -- Robert Ancell Fri, 11 Dec 2009 09:47:09 +1100 + +gnome-applets (2.28.0-3) unstable; urgency=low + + * debian/patches/15_path-max.patch: + - Avoid using PATH_MAX since it's not necessarily defined. Fixes a build + issue on the Hurd. + + -- Emilio Pozuelo Monfort Mon, 07 Dec 2009 17:32:12 +0100 + +gnome-applets (2.28.0-2) unstable; urgency=low + + * Upload to unstable. + + -- Emilio Pozuelo Monfort Thu, 22 Oct 2009 05:29:24 +0200 + +gnome-applets (2.28.0-1) experimental; urgency=low + + * New upstream release. + - debian/control.in: + + Build depend on libxklavier-dev >= 4.0 rather than libxklavier12-dev. + + Build depend on libpolkit-gobject-1-dev for PolicyKit 1 support. + Drop libpolkit-dev and libpolkit-gnome-dev build dependencies. + Recommend policykit-1-gnome rather than policykit-gnome. + - debian/patches/01_distclean.patch: + + Removed, fixed upstream. + - debian/patches/09_modemlights_use_new_gst.patch, + debian/patches/98_autoreconf.patch: + + Refreshed. + * debian/control.in: + - Remove old gnome-cpufreq-applet replaces/conflicts/provides. + - Recommend python-gconf, python-gnomeapplet, python-gobject and + python-gtk2, needed by invest-applet. + + -- Emilio Pozuelo Monfort Thu, 08 Oct 2009 19:58:14 +0200 + +gnome-applets (2.26.3-2) unstable; urgency=low + + [ Josselin Mouette ] + * Use HAL also on GNU/kFreeBSD. + * Don’t require network-manager for non-Linux architectures. + Closes: #542645. + + [ Emilio Pozuelo Monfort ] + * Standards-Version is 3.8.3, no chanes needed. + * Autogenerate debian/cpufreq-selector.1 during build. + + -- Emilio Pozuelo Monfort Sat, 29 Aug 2009 01:51:42 +0200 + +gnome-applets (2.26.3-1) unstable; urgency=low + + * New upstream release. + * 10_network-manager.patch: new patch. Use NM instead of network-admin + to edit connections. + * 98_autoreconf.patch: updated for the new version. + + -- Josselin Mouette Sat, 15 Aug 2009 10:15:10 +0200 + +gnome-applets (2.26.1-1) unstable; urgency=low + + * New upstream release. + + Hide sticky notes when clicking the applet. Closes: #446248. + + Text displays when switching cpufreq from graphics only to text + only. Closes: #439829. + * Update build-dependencies. + * Enable mixer applet explicitly. + * 01_depend_on_gnomeui_directly.patch: dropped, obsolete. + * 02_selector_crash.patch: dropped, merged upstream. + * 09_modemlights_use_new_gst.patch: updated to apply cleanly. + * 98_autoreconf.patch, 99_ltmain_as-needed.patch: updated accordingly. + + -- Josselin Mouette Wed, 17 Jun 2009 22:13:18 +0200 + +gnome-applets (2.24.3.1-3) unstable; urgency=low + + [ Josselin Mouette ] + * Stop mentioning GNOME 2. + * Remove scrollkeeper dependency. + + [ Gustavo Noronha Silva ] + * debian/patches/01_depend_on_gnomeui_directly.patch: + - make applets that use libgnomeui use GNOME_LIBS2_{CFLAGS,LIBS} + directly instead of relying on panel-applet bringing libgnomeui and + lib gnome indirectly + * debian/patches/09_modemlights_use_new_gst.patch: + debian/patches/98_autoreconf.patch: + - refreshed to accomodate the change above + + -- Gustavo Noronha Silva Mon, 25 May 2009 15:56:34 -0300 + +gnome-applets (2.24.3.1-2) unstable; urgency=low + + * 02_selector_crash.patch: new patch, stolen upstream. Fixes crash in + cpufreq-selector. Closes: #523022. + * gnome-applets-data.postinst: removed, no longer necessary after the + lenny release. + + -- Josselin Mouette Wed, 08 Apr 2009 11:42:09 +0200 + +gnome-applets (2.24.3.1-1) unstable; urgency=low + + * gnome-applets.preinst: don’t remove the statoverride upon first + installation. + * New upstream release. + * Standards version is 3.8.1. + * Recommend policykit-gnome. + * gnome-applets.preinst: add missing #DEBHELPER# + * Fix section for gnome-applets-dbg. + + -- Josselin Mouette Tue, 07 Apr 2009 13:05:43 +0200 + +gnome-applets (2.24.2-1) experimental; urgency=low + + * es.po: updated Spanish translation from Francisco Javier Cuadrado. + Closes: #502236. + * Recommend cpufrequtils. Closes: #448833. + * Remove suggests on useless frequency daemons. + * New upstream release. + * Update build-dependencies accordingly. + * Remove debconf stuff for the setuid program. + * gnome-applets.preinst: remove the statoverride before upgrade. + * Remove obsolete README.Debian. + * Replace libgnomevfs2-extra dependency by gvfs. + * 02_trashapplet_2.20.patch: removed. + * 09_modemlights_use_new_gst.patch: updated to the changes in + modemlights. + * 80_mixer_user_gstreamer_signals.patch: dropped, merged upstream. + * 01_distclean.patch: add reference. + * 98_autoreconf.patch: regenerated for the new version. + * Pass echo=/bin/echo to make to work around yet another libtool + bug from R’lyeh. + + -- Josselin Mouette Fri, 26 Dec 2008 19:57:47 +0100 + +gnome-applets (2.22.3-3) unstable; urgency=low + + [ Josselin Mouette ] + * ro.po: updated Romanian translation from Eddy Petrișor. + Closes: #489196. + + [ Loic Minier ] + * Pass --disable-battstat to configure if DEB_HOST_ARCH_OS is kfreebsd as + battstat doesn't build under GNU/kFreeBSD; thanks Petr Salinger; + closes: #494301. + + [ Josselin Mouette ] + * 02_trashapplet_2.20.patch: revert the trashapplet code to 2.20, + using GnomeVFS, as we don't want a dependency on gvfs-backends just + for the trash. Needs revert post-lenny. Closes: #481762. + * 98_autoreconf.patch: updated accordingly. + * ja.po: updated Japanese translation from Hideki Yamane. + Closes: #494094. + + -- Josselin Mouette Fri, 29 Aug 2008 10:44:33 +0200 + +gnome-applets (2.22.3-2) unstable; urgency=low + + * NACK 2.22.3-1.1 NMU. + * Switch to quilt for patch handling, refresh patches, build-depend on + quilt. + * 01_distclean.patch: patch from Peter Eisentraut to fix FTBFS if + built twice in a row. Closes: #424337. + * 98_autoreconf.patch: regenerated. + + -- Josselin Mouette Fri, 18 Jul 2008 18:19:30 +0200 + +gnome-applets (2.22.3-1) unstable; urgency=low + + [ Josselin Mouette ] + * Brown-paper bag re-enabling of liboobs support. Closes: #485740. + + [ Sebastian Dröge ] + * New upstream bugfix release: + + debian/patches/98_autoreconf.patch: + - Regenerated for the new version. + * debian/control.in: + + Updated Standards-Version to 3.8.0, no additional changes needed. + * debian/patches/09_modemlights_use_new_gst.patch: + + Updated from the Ubuntu package for the new liboobs. + + -- Sebastian Dröge Mon, 30 Jun 2008 12:50:57 +0200 + +gnome-applets (2.22.2-1) unstable; urgency=low + + [ Josselin Mouette ] + * Remove unneeded build-dependency on liboobs. + + [ Sebastian Dröge ] + * New upstream bugfix release: + + debian/patches/98_autoreconf.patch: + - Regenerated for the new version. + + -- Sebastian Dröge Mon, 02 Jun 2008 14:50:34 +0200 + +gnome-applets (2.22.1-2) unstable; urgency=low + + * Depend on gstreamer0.10-alsa | gstreamer0.10-audiosink | hurd. + Closes: #482793. + * Upload to unstable. + * Allow rarian-compat as an alternative build-dependency. + + -- Josselin Mouette Wed, 28 May 2008 02:39:51 +0200 + +gnome-applets (2.22.1-1) experimental; urgency=low + + * New upstream bugfix release: + + debian/control.in: + - Update build dependencies. + + debian/patches/98_autoreconf.patch: + - Updated to apply cleanly again. + + -- Sebastian Dröge Sat, 19 Apr 2008 20:54:49 +0200 + +gnome-applets (2.22.0-1) experimental; urgency=low + + [ Josselin Mouette ] + * gnome-keyboard-layout.xml: fix encoding declaration. + Closes: #464678. + * debian/po/nl.po: Dutch translation of Debconf templates, from + Vincent Zweije. Closes: #464447. + * Remove Recommends on imagemagick. Closes: #345093. + + [ Sebastian Dröge ] + * New upstream stable release: + + debian/control.in: + - Update build dependencies and dependencies. + - Drop gnome-applets-dev package, stuff is now in libgweather-dev. + + debian/patches/*gweather*.patch: + - Dropped, these are now in libgweather. + + debian/rules, + debian/gnome-applets-dev.install, + debian/gnome-applets.install: + - Drop all remaining parts of the internal libgweather. + + debian/patches/09_modemlights_use_new_gst.patch: + - Updated to apply cleanly again. + + debian/patches/98_autoreconf.patch: + - Updated for the new version. + + -- Sebastian Dröge Mon, 17 Mar 2008 14:01:38 +0100 + +gnome-applets (2.20.1-2) unstable; urgency=low + + * debian/patches/06_gweather-dist-files.patch: + + Updated locations and translations from upstream SVN. + + -- Sebastian Dröge Tue, 08 Jan 2008 14:38:02 +0100 + +gnome-applets (2.20.1-1) unstable; urgency=low + + [ Loic Minier ] + * Add Finnish translation of the debconf templates; thanks Esko Arajärvi; + closes: #448415. + + [ Sebastian Dröge ] + * New upstream bugfix release, with many translation updates: + + debian/patches/98_autoreconf.patch: + - Regenerated for the new version. + * debian/control.in: + + Update Standards-Version to 3.7.3, no additional changes needed. + + Add build dependency on po-debconf. + + -- Sebastian Dröge Mon, 07 Jan 2008 10:25:50 +0100 + +gnome-applets (2.20.0-1) unstable; urgency=low + + [ Christian Perrier] + * Debconf translation updates: + - Vietnamese. Closes: #429908 + - Italian. Closes: #430198 + - French. Closes: #430990 + - German. Closes: #431152 + - Czech. Closes: #431187 + * Fix missing comma in debconf templates. Closes: #431155 + Translation unfuzzied + + [ Guilherme de S. Pastore ] + * Debconf translation updates: + - Malayalam. Closes: #430699 + - Russian. Closes: #430703 + + [ Loic Minier ] + * Document need for libgnomevfs2-extra for GNOME Weather applet in + README.Debian too; closes: #418990. + * Promote libgonmevfs2-extra to a Depends instead of a Recommends as APT + enforcement will take a little while. + + [ Sebastian Dröge ] + * New upstream release: + + debian/control.in: + - Require newer versions of GLib and Gtk. + + debian/patches/60_acpi-info-missing.patch: + - Dropped, similar solution merged upstream. + + debian/patches/06_gweather-dist-files.patch, + - Updated. + + debian/patches/10_colourado-l10n.patch: + - Dropped, merged upstream. + * debian/patches/80_mixer_user_gstreamer_signals.patch, + debian/control.in: + + Patch from Ubuntu/Bugzilla (#370937). Use signals to get notified about + mixer changes instead of polling (Closes: #424015). This requires + gst-plugins-base >= 0.10.14. + * debian/patches/09_modemlights_use_new_gst.patch, + debian/control.in: + + Patch from Ubuntu to use the new gnome-system-tools for the modemlights + applet. + * debian/patches/98_autoreconf.patch, + debian/patches/99_ltmain_as-needed.patch: + + Updated for the above patch. + + [ Josselin Mouette ] + * Demote tomboy from recommends to suggests (closes: #435601). + + -- Sebastian Dröge Fri, 21 Sep 2007 09:17:07 +0200 + +gnome-applets (2.18.0-4) unstable; urgency=low + + [ Loic Minier ] + * Recommend python-gnome2 for gconf support; thanks Richard Antony Burton; + closes: #421421. + + [ Sven Arvidsson ] + * Update package description (Closes: #324512) + - modem lights replaced with modem monitor + - sticky notes is deprecated + + [ Josselin Mouette ] + * 99_ltmain_as-needed.patch: get --as-needed back to work. + + [ Christian Perrier ] + * Debconf templates and debian/control reviewed by the debian-l10n- + english team as part of the Smith review project. Closes: #428786 + * Debconf translation updates: + - Galician. Closes: #429282 + - Portuguese. Closes: #429328 + - Swedish. Closes: #429390 + + [ Guilherme de S. Pastore ] + * New Debconf translation: + - Bulgarian. Closes: #430639 + * debian/control.in: updated maintainer e-mail address. + + -- Guilherme de S. Pastore Tue, 26 Jun 2007 13:14:47 -0300 + +gnome-applets (2.18.0-3) unstable; urgency=low + + * Change libgucharmap5-dev build dependency to libgucharmap-dev. + + -- Sebastian Dröge Thu, 26 Apr 2007 06:52:13 +0200 + +gnome-applets (2.18.0-2) unstable; urgency=low + + * Build-depend on libgucharmap5-dev instead of libgucharmap4-dev. + * Upload to unstable; drop check-dist include. + * Wrap build-deps and deps. + * Add ${misc:Depends}. + * Cleanups. + * New patch, 60_acpi-info-missing, fixes crash when /proc/acpi/info is + missing, as will soon be the case in new kernels; GNOME #427562; + closes: #418992. + + -- Loic Minier Wed, 25 Apr 2007 11:44:12 +0200 + +gnome-applets (2.18.0-1) experimental; urgency=low + + * New upstream major stable release. + - Update patches 06_gweather-dist-files, 07_autoconf-automake. + - Add a libxml2-dev (>= 2.5.0) build-dep. + - Build-depend on libgnomekbdui-dev instead of libxklavier11-dev. + - Update description to mention "Invest" instead of "Stock ticker"; don't + install the gtick manpage as the invest applet supersedes it; + Ubuntu #81157. + - Drop references to the gswitchit applet and libgswitchit which are + replaced by gnomekbd. + - Drop patch 11_umount-progress-bar, obsoleted by gnome-mount. + - Adapt man page generation. + * Set LDFLAGS directly instead of via DEB_CONFIGURE_SCRIPT_ENV; build-dep on + cdbs >= 0.4.41. + * Drop distclean in clean::. + + -- Loic Minier Sat, 24 Mar 2007 12:55:26 +0100 + +gnome-applets (2.16.2-3) experimental; urgency=low + + * Merge 2.14.3-5 and 2.14.3-6; SVN r8331:9207. + - Update patches 05_gweather-dist-fixes, 06_gweather-dist-files, + 07_autoconf-automake. + - Drop en_GB hunk in 10_colourado-l10n; merged upstream. + + -- Loic Minier Sat, 24 Mar 2007 10:51:55 +0100 + +gnome-applets (2.16.2-2) experimental; urgency=low + + [ Josselin Mouette ] + * Merge 2.14.3-4. + * Recommend libgnomevfs2-extra (closes: #405340). + * Build-depend on pygtk 2.10 to make the configure script work even + without a DISPLAY (closes: #407585). + + [ Loic Minier ] + * Add a get-orig-source target to retrieve the upstream tarball. + * Add an epoch to the libgnomevfs2-dev build-dep; closes: #411661. + * Include the new check-dist Makefile to prevent accidental uploads to + unstable; bump build-dep on gnome-pkg-tools to >= 0.10. + * Bump build-deps to libgtk2.0-dev >= 2.10.0, libgnomeui-dev >= 2.16.0-2, + add build-dep on libbonobo2-dev (>= 2.15.0), librsvg2-common (>= 2.16.0-2) + to get versions past all transitions; these are workarounds for the + current build issues. + + -- Loic Minier Tue, 20 Feb 2007 14:50:36 +0100 + +gnome-applets (2.16.2-1) experimental; urgency=low + + * New upstream release. + * Update patches. + * Update all build-dependencies. + * Bump shlibs requirement. + * Recommend tomboy. + * Remove command-line applet from description. + * Use ${gnome:Version} for the gnome-applets-data dependency. + + rules: call gnome-version.mk. + + Build-depend on gnome-pkg-tools 0.6. + * Update watch file. + * gnome-applets-data.install: install the python modules. + * Call dh_pysupport to generate python dependencies. + * Build-depend on python-support 0.4. + * pyversions: require python 2.4. + + -- Josselin Mouette Thu, 21 Dec 2006 23:45:31 +0100 + +gnome-applets (2.14.3-6) unstable; urgency=low + + * Rework the packaging fix for Locations.xml translations completely. + - Rename patch 06_gweather-dist-fixes to 05_gweather-dist-fixes and limit + it to autofoo changes to: configure.in, gweather/Makefile.am, + Makefile.am. + - New patch, 06_gweather-dist-files, ships gweather/Locations.xml.in and + files which would be disted below po-locations/ (mostly *.po files). + - Rename patch 07_automake to 07_autoconf-automake and update it to also + refresh configure. + - Update patch 10_colourado-l10n to change po-locations/en_GB.po and ka.po + instead of Locations.xml. + * cpufreq-selector manpage by Theppitak Karoonboonyanan; closes: #415979. + + -- Loic Minier Fri, 23 Mar 2007 18:57:20 +0100 + +gnome-applets (2.14.3-5) unstable; urgency=high + + * Add a get-orig-source target to retrieve the upstream tarball. + * Fix upstream packaging to ship gweather/Locations.xml.in; closes: #415315. + - New patch, 06_gweather-dist-fixes, fixes gweather/Makefile.am to dist + the Locations.xml.in and adds Locations.xml.in from upstream's SVN, + gnome-2-14 branch; GNOME #419863. + - New patch, 07_automake, result of an automake-1.8 run. + - Update patch 08_gweather_locations to patch Locations.xml.in instead of + Locations.xml. + + -- Loic Minier Mon, 19 Mar 2007 18:19:29 +0100 + +gnome-applets (2.14.3-4) unstable; urgency=medium + + * gl.po: Galician debconf translation from Jacobo Tarrio + (closes: #405400). + * 08_gweather_locations.patch: updated thanks to Kevin Brown, fix + location of the Santa Clara airport (closes: #378641). + + -- Josselin Mouette Wed, 3 Jan 2007 19:42:59 +0100 + +gnome-applets (2.14.3-3) unstable; urgency=low + + [ Sven Arvidsson ] + * New patch, 11_umount-progress-bar, to display a progress bar when + umounting an USB stick (or other volumes); taken from the Ubuntu + packages as well as the translations. Includes the fix from #400996. + (Closes: #398373) + + [ Loic Minier ] + * Upload. + + -- Loic Minier Mon, 4 Dec 2006 20:18:33 +0100 + +gnome-applets (2.14.3-2) unstable; urgency=low + + [ Loic Minier ] + * Add Dutch translation of Debconf templates, thanks Esther Hanko. + (Closes: #355389) + * Add Russian translation of Debconf templates, thanks Yuri Kozlov. + (Closes: #382076) + + [ Christian Perrier ] + * Debconf translations: + - Vietnamese added. Closes: #314188 + - German added. Closes: #355557 + - Danish added. Closes: #352481 + - Italian added. Sent during the call for updates of the NMU campaign. + + [ Loic Minier ] + * Sync with latest debian/po/* files; under others: update .pot, update + de.po's encoding. + * New patch, 10_colourado-l10n, to fix use of "Colourado Springs" instead + of, well, Colorado; thanks David Breakey; closes: #396223. + + [ Christian Perrier ] + * Debconf translations: + - Romanian added. Sent during the call for updates of the NMU campaign. + * Fix a fuzzy string in ja.po. + + -- Loic Minier Sun, 5 Nov 2006 18:54:20 +0100 + +gnome-applets (2.14.3-1) unstable; urgency=low + + [ Loïc Minier ] + * New patch by Christophe Mutricy for the translation of "knots" in french. + (Closes: #369889) + [debian/patches/10_knots-french-translation.patch] + * New patch thanks to Christian Pernegger for the translation of "Vienna" in + german. (Closes: #357795) + [debian/patches/11_vienna-german-translation.patch] + + [ Josselin Mouette ] + * debian/po/lt.po: Lithuanian translation of debconf templates + (closes: #381234). + + [ Loic Minier ] + * New upstream release, "Codename Glade". + - Drop 10_knots-french-translation, merged upstream. + - Drop 11_vienna-german-translation, merged upstream. + + -- Loic Minier Tue, 8 Aug 2006 10:13:17 +0200 + +gnome-applets (2.14.2-1) unstable; urgency=low + + [ Josselin Mouette ] + * Recommend deskbar-applet (closes: #368528). + + [ Loic Minier ] + * Remove dup build-dep on xlibs-static-dev. + [debian/control, debian/control.in] + * Drop all xlibs-static-dev build-deps altogether. + [debian/control, debian/control.in] + * New upstream release. + + -- Loic Minier Wed, 31 May 2006 17:00:42 +0200 + +gnome-applets (2.14.1-1) unstable; urgency=low + + [ Loic Minier ] + * Fix GNU/kFreeBSD build-deps (libhal-dev) and dependencies + (gstreamer0.8-alsa versus -oss), thanks Robert Millan. (Closes: #353170) + [debian/control, debian/control.in, debian/rules] + + [ Josselin Mouette ] + * Make the package binNMU-safe. + + Build-depend on dpkg-dev 1.13.19. + + Use ${source:Version} and ${binary:Version}. + * New upstream release. + * Update build-dependencies. + * Use debhelper mode 5. + * Switch to gstreamer 0.10. + * Use type-handling for build-dependencies. + * Remove unnecessary hacks for generating dependencies. + * gnome-applets-data.{install,postinst}: remove the horrible defaults + added to the system default source. + * 08_gweather_locations.patch: updated. + * 09_gweather_translation.patch,stickynotes-utf-8-date-title.patch, + 10_kfreebsd.patch: removed, integrated upstream. + * Enable gstreamer for hurd-i386 but don't depend on an audiosink as + there isn't one available. + * Cleanup *.install. + * gnome-applets{,-data}.install: ship libgweather. + * Add a shlibs statement about libgweather. + + -- Josselin Mouette Fri, 19 May 2006 18:45:10 +0200 + +gnome-applets (2.12.3-1) unstable; urgency=low + + * New upstream release: updated translations. + * [debian/control.in, debian/rules] The square brackets syntax for + architecture-specific dependencies is only defined for build-time + relationships, not for run time relationships like "Suggests". Use + dpkg-architecture and a sed construct to make the 'acpid' suggestion on + architectures where it is available. + + -- J.H.M. Dassen (Ray) Sun, 12 Feb 2006 17:40:59 +0100 + +gnome-applets (2.12.2-4) unstable; urgency=low + + [ Gustavo Noronha Silva ] + * Upload to unstable + + [ Josselin Mouette ] + * 03_battstat_default.patch, 07_drivemount_mediamount.patch: removed. + * gnome-applets.gconf-defaults: set the defaults here. + * control.in: require debhelper 5.0.13. + + -- Josselin Mouette Sun, 8 Jan 2006 11:41:52 +0100 + +gnome-applets (2.12.2-3) experimental; urgency=low + + * Build against dbus >= 0.60 + + -- Sjoerd Simons Sun, 18 Dec 2005 21:19:57 +0100 + +gnome-applets (2.12.2-2) experimental; urgency=low + + * Minor cleanups in debian/rules. + * Add patch from Ryuichi Arafune to convert date_title + from the current locale to UTF-8 in stickynotes. (Closes: #319127) + [debian/patches/stickynotes-utf-8-date-title.patch] + + -- Loic Minier Tue, 13 Dec 2005 10:07:29 +0100 + +gnome-applets (2.12.2-1) experimental; urgency=low + + * New upstream release + + -- Guilherme de S. Pastore Wed, 30 Nov 2005 14:35:57 -0200 + +gnome-applets (2.12.1-2) experimental; urgency=low + + * debian/control.in: + - eliminated circular dependency by removing the dependency of + gnome-applets-data on gnome-applets (Closes: #339912) + * debian/patches/10_kfreebsd.patch: + - apply patch from Aurelien Jarno to allow + build on kfreebsd-gnu. Thanks! (Closes: #320962) + * debian/po/pt_BR.po: updated/fixed. + + -- Guilherme de S. Pastore Thu, 17 Nov 2005 14:23:57 -0200 + +gnome-applets (2.12.1-1) experimental; urgency=low + + [ Guilherme de S. Pastore ] + * New maintainer + Thanks a lot for all your work, Marc! + + * New upstream release + - Fixes crash with sticky notes properties dialog (Closes: #318517) + - Displays last update time in gweather in local time (Closes: #319471) + - Keyboard indicator now includes disambiguations for layouts with + equal short descriptions (Closes: #319605) + + * Dropped the following patches; issues fixed upstream: + - 01_battstat_update.patch + - 02_battstat_icon.patch + - 04_battstat_no_suspend.patch + - 05_gtik_3decimalplaces.patch + - 06_stickynotes_docs_dupe_id.patch + - 09_cpufreq_handle_missing_scaling_available_frequencies_file.patch + + * New or updated debconf templates translations: + - fr; thanks to Jean-Luc (Closes: #317529) + - pt_PT; thanks to Rui Branco (Closes: #330381) + - sv; thanks to Daniel Nylander (Closes: #333319) + + * debian/patches: + - 09_gweather_translation.patch: get fix for German translation from + upstream CVS (Closes: #338374) + + * debian/control.in: + - dropped double build dependency on debhelper + - updated build dependencies for the new version + - tighten dependencies and recommendations for 2.12 versions + - dropped versioning for dependencies and build-dependencies on + cdbs and scrollkeeper, stable already has greater versions + + * debian/copyright: + - added note about the maintainer change + - changed downloaded-from URL to use HTTP instead of FTP + + * debian/gnome-applets.{config,postinst}: + - applied patch from Robert Millan to allow + installation on kfreebsd-gnu. Thanks! + + * debian/watch: + - updated + + [ Loic Minier ] + * Update Czech translation of debconf templates. (Closes: #321735) + + [ Josselin Mouette ] + * Pass --as-needed to ld. + + [ Gustavo Noronha Silva ] + * debian/rules, debian/gnome-applets-dev.install: + - no longer build on the debian/build directory, since it breaks + the building of gnome-doc-utils stuff and causes no dirty on the + Debian diff + + -- Guilherme de S. Pastore Wed, 16 Nov 2005 16:49:11 -0200 + +gnome-applets (2.10.1-5) unstable; urgency=low + + * Added necessary build-deps for Xorg transition. + + -- Marc Dequènes (Duck) Wed, 13 Jul 2005 15:30:39 +0200 + +gnome-applets (2.10.1-4) unstable; urgency=low + + * Recommends : s/gnome-netstatus/gnome-netstatus-applet/ + (Closes: #314176) + * Fixed override disparities for gnome-applets-dbg + (s/optional/extra/). + * Disabled gstreamer support on Hurd (thanks to Michael Banck). + * Now building in 'debian/build/' directory (cleaner). + * Applied patch for cpufreq to "handle missing scaling available + frequencies file" from Johannes Berg (Closes: #314331). + * Suggests 'cpufreqd | cpudyn | powernowd' for cpufreq applet. + * Added SUID handling via debconf for cpufreq-applet (Closes: #311109) + with updated French, Brazilian Portuguese and Czech translations + (Closes: #312436). + * Removed clean rule hack to work around #299010. + * Increased Standards-Version (no changes needed). + * Removed obsolete Conflicts/Replaces. + * Use type-handling Provides intead of this once again fucked utility + directly (Thanks to Np23[79] for advice). + + -- Marc Dequènes (Duck) Mon, 27 Jun 2005 23:50:32 +0200 + +gnome-applets (2.10.1-3) unstable; urgency=low + + * Upload to unstable. + + -- Marc Dequènes (Duck) Fri, 10 Jun 2005 21:17:02 +0200 + +gnome-applets (2.10.1-2) experimental; urgency=low + + * Get rid of buggy mc-install-default-macros ; made a .entries file to + be loaded with gconftool-2 as replacement. + * Added necessary Conflicts/Replaces/Provices for trashapplet to ease + migration from Sarge (trashapplet is now included into applets) + (Closes: #306871). + + -- Marc Dequènes (Duck) Thu, 5 May 2005 13:51:55 +0200 + +gnome-applets (2.10.1-1) experimental; urgency=low + + * New upstream release + * Mass build-depends and depends update (Closes: #292679). + * Added Replaces/Conflicts/Provides on gnome-cpufreq-applet. + * Now depending on gnome-icon-theme where several applet icons lies. + * Defaulting to 'gstreamer0.8-alsa' dependency instead of + 'gstreamer0.8-oss' (OSS is DEPRECATED and must die). + * Removed the following patches now included upstream : + + 06_gweather_utf8.patch + + 11_batstat_ui_fix.patch + * Removed the following patches now obsolete : + + 01_keep_keyprop.patch + + 02_gkb_xmmap.patch + + 03_modemlights_ppp_commands.patch + + 07_inboxmonitor_ssl.patch + + 10_batstat_transparent_background.patch + + 12_buildsys_relibtoolized.patch + * Regenerated patches : + + 08_gweather_locations.patch + + 09_drivemount_mediamount.patch + * Removed obsolete Indian & Latvian language support files. + * Fixed 'debian/gnome-keyboard-layout.xml' man page source typo + (Closes: #302733). + * Fixed in 2.10 branch : + + gkb disables VT switching in XFree86 4.3 (Closes: #233702). + + gweather: would be nice to show a moon during night-time clear sky + (Closes: #201984). + + include NYC Central Park (Closes: #304137). + + xml parsing errors during upgrade (Closes: #286125). + + gnome-keyboard-applet no longer show flag icon (flags removed) + (Closes: #285478) (see the "NO Flags Policy" thread : + http://mail.gnome.org/archives/desktop-devel-list/2003-November/ \ + msg00267.html ) + * Invalidated by major upstream changes : + + mailcheck removed (Closes: #285331, #89940, #82874, #292349, #207355, + #245142, #286360, #89940, #184186). + + cdplayer removed (Closes: #280436). + + wireless removed (no bugs). + + modemlights rewritten (Closes: #247209, #273429, #220796, #115732, + #173420). + + drivemount rewritten (Closes: #70456, #173545). + * Added 'gnome-applets-dbg.' binary package. + * Renamed 'postinst' to 'gnome-applets.postinst'. + * Added 'debian/README.Debian' with information about cpufreq applet + SUID parameter. + * Patch stolen from Ubuntu package (thanks to seb128's work) : + + 05_battstat-icon.patch : patch from Ryan Lortie to + fix some refresh issue with battstat. + + 06_battstat-default.patch : changed the default configuration for the + battstat applet (show battery activated by default). + + 08_battstat-no-suspend.patch : disable the suspend-on-double-click, + which is not yet working. + + 13_stickynotes-docs-dupe-id.patch : documentation fix. + * Reindexed patches. + * Removed extra cleanup rules (buildsys has learned hygiene). + * Fixed stupid cut-and-paste mistake in 'debian/copyright'. + * Updated 'debian/watch'. + * Temporarily reverted 'debian/control' generation to please ftpmasters + before a real solution is found and accepted. + + -- Marc Dequènes (Duck) Sun, 17 Apr 2005 02:57:49 +0200 + +gnome-applets (2.8.2-1) unstable; urgency=low + + * New upstream release. + * Suggests 'acpid' only on available architectures. + * Updated policy to 3.6.1.1 (no changes needed). + * Regenerated relibtoolize patch. + + -- Marc Dequènes (Duck) Sun, 12 Dec 2004 01:05:40 +0100 + +gnome-applets (2.8.1.1-4) unstable; urgency=low + + * Makes 'gstreamer0.8-oss' the default audiosink, as we have the OSS + burden in Sarge (Closes: #282745). + * Applied patch from CVS to add transparent background (Closes: + #272895). + * Applied patch from CVS to fix UI padding and key shortcut typo. + * CDBS Tweaks. + + -- Marc Dequènes (Duck) Sun, 28 Nov 2004 16:19:33 +0100 + +gnome-applets (2.8.1.1-3) unstable; urgency=low + + * Upload to unstable. + + -- Sebastien Bacher Fri, 19 Nov 2004 19:50:04 +0100 + +gnome-applets (2.8.1.1-2) experimental; urgency=low + + * Applied fixes : + + [inbox_monitor] patch from gnomezilla to add SSL support to + applet (Closes: #216324). + + [gweather] corrected Dulles zone (DCZ013->VAZ042), Washington DC + zone was corrected upstream (Closes: #278143). + + [drivemount] FHS compliance fix : mount point for removeable + media is /media and not /mnt (Closes: #265184). + * Regenerated relibtoolize patch. + + -- Marc Dequènes (Duck) Sun, 14 Nov 2004 00:14:52 +0100 + +gnome-applets (2.8.1.1-1) experimental; urgency=low + + * New upstream release : + + fix sticky notes not remembering hidden status + (Closes: #275819). + * 'libapm-dev' build-dep now restricted to linux architectures + (Closes: #272773). + + -- Marc Dequènes (Duck) Thu, 14 Oct 2004 23:14:28 +0200 + +gnome-applets (2.8.0-1) experimental; urgency=low + + * New upstream release : + + corrected tabs titles (Closes: #264293). + + gswitchit help added (Closes: #241892). + + modemlights connect time and throughtput not shown is obsolete + bug (Closes: #114524). + + gkb is now setxkbmap-compatible (Closes: #255680). + * Removed '05_gkb_swedish_dollar.patch' now included upstream. + * Regenerated relibtoolize patch. + * 'debian/control.in' : using more ${misc:Depends} and updated + versions. + * Added gtik patch from Jason Thomas to get 3 + decimal places instead of 2 to comply with Yahoo behavior (Closes: + #267526). + * Added gweather patch from Gareth Owen in + gnomezilla to correct UTF-8 problems (Closes: #205303). + + -- Marc Dequènes (Duck) Wed, 15 Sep 2004 00:16:05 +0200 + +gnome-applets (2.7.0-1) unstable; urgency=low + + * New upstream release + * Removed now included patch '05_cvs_gweather_windspeed.patch'. + * Removed now included patch '06_cvs_gweather_size.patch'. + * Regenerated relibtoolize patch. + + -- Marc Dequènes (Duck) Wed, 21 Jul 2004 22:13:31 +0200 + +gnome-applets (2.6.2-1) unstable; urgency=low + + * The 'Bughunt party release'. + * New upstream release, fix the following : + + [mixer] restore saved channel on startup (Closes: #253232) + + [gweather] fixed memory leaks (Closes: #171743) + * Gstreamer support is back. + * Moved Gstreamer Audio output pluggins to Depends as too many people + complains Mixer applet is not working and not looking carefully at + pkg information (Closes: #250393). + * Added watch file (Thx to seb128). + * Applied patches from CVS : + + [gweather] (corrected) get windspeed mesurement in m/s + (Closes: #169699) + + [gweather] size follow panel size (Closes: #217087) + * Applied patch to add dollar sign for swedish keyboard (Closes: + #234103). + * Added Latvian language support in gkb provided by Aigars Mahinovs + (Closes: #220451). + * Removed APM PPC patch as the problem is now fixed upstream. + * Regenerated relibtoolize patch (now much lighter : 2.9MB -> 60KB + uncompressed, upstream stopped using prehistoric tools ;-). + * Added 'autotools-dev' to build dependencies to take advantage of the + CDBS magic feature for updating autostuff files. + * Updated some Build-Depends/Depends versions. + + -- Marc Dequènes (Duck) Sun, 4 Jul 2004 20:03:12 +0200 + +gnome-applets (2.6.1-7) unstable; urgency=high + + * Urgency high because needed in testing. + * Gstreamer support temporarily deactivated to allow applets to enter + testing (gst-plugins0.8 not available in testing yet). + * Added missing Recommends on 'gnome-system-monitor' (in addition to + the rebuild with libgtop2 in -6, Closes: #246567). + * Added missing Builddep on 'sharutils'. + * Added Conflict/Replace on 'gnome-core' needed for woody transition + (Closes: #252474). + * Added 'gnome-media' to Recommends (Closes: #252435). + + -- Marc Dequènes (Duck) Tue, 22 Jun 2004 11:10:06 +0200 + +gnome-applets (2.6.1-6) unstable; urgency=low + + * Updated Build-dep on 'libgtop2-dev' because new pkg correct + important shlibdeps problems (and would perhaps correct #246567). + + -- Marc Dequènes (Duck) Sun, 30 May 2004 18:03:42 +0200 + +gnome-applets (2.6.1-5) unstable; urgency=low + + * Added Gstreamer Audio output pluggins to Recommends, needed by the + Mixer applet (Closes: #250393). + * Added Indian Languages support (GKB flag & keyprops) created by the + IndLinux project (Thx to Jaldhar H. Vyas) (files licensed under GPL) + (Closes: #250694). + * Added patch for battstat applet from Ludovic Rousseau (should + Closes: #234889). + + -- Marc Dequènes (Duck) Sat, 29 May 2004 17:33:39 +0200 + +gnome-applets (2.6.1-4) unstable; urgency=low + + * GNOME Team Upload. + * Upload in unstable. + + -- Sebastien Bacher Wed, 26 May 2004 19:53:56 +0200 + +gnome-applets (2.6.1-3) experimental; urgency=low + + * Added missing build-dep on 'xlibs-static-dev' (Closes: #250365). + * Now building against gstreamer 0.8. + * gtk-doc generation disabled. + + -- Marc Dequènes (Duck) Sun, 23 May 2004 12:44:09 +0200 + +gnome-applets (2.6.1-2) experimental; urgency=low + + * Readded 04_apm_ppc.patch still necessary (Closes: #249622). + * Improved gnome-applets-data dependencies (Closes: #247060). + * s/2.6.0/2.6.1/ on all Depends/Build-Depends. + + -- Marc Dequènes (Duck) Thu, 20 May 2004 16:36:04 +0200 + +gnome-applets (2.6.1-1) experimental; urgency=low + + * New upstream release + * Removed 03_gweather_fix_meteo_condition.patch now included upstream. + * Relibtoolized to avoid inflated dependencies ('Makefile.in' files + regenerated too to build correctly => fat patch). + * Added some more cleanups in 'clean' rule. + * Removed 04_apm_ppc.patch not needed anymore. + + -- Marc Dequènes (Duck) Sat, 15 May 2004 04:05:07 +0200 + +gnome-applets (2.6.0-4) experimental; urgency=low + + * Corrected a silly mistake in Build-Depends. + + -- Marc Dequènes (Duck) Fri, 9 Apr 2004 04:59:26 +0200 + +gnome-applets (2.6.0-3) experimental; urgency=low + + * Added improved patch from Arnaud Patard to correct parsing of meteo + condition. + * Added missing Build-Depends on libxklavier. + * Rebuilt using libgstreamer needed by the mixer applet. + * Activated IPv6 support. + * Added patch for APM on PPC from Thom May. + + -- Marc Dequènes (Duck) Wed, 31 Mar 2004 01:49:30 +0200 + +gnome-applets (2.6.0-2) experimental; urgency=low + + * Reactivated mini-commander default macros generation. + * Created new binary pkg 'gnome-applets-dev' containing materials to + build extensions for some applets. + * Added patch from Arnaud Patard to correct parsing of meteo + condition. + * Reapplied old patch for modemlights using bad commands : + s/pppon/pon/ & s/pppoff/poff/. + * Added missing manpages for 'gnome-keyboard-layout' and 'gswitchit- + plugins-capplet'. + * Rebuild against new libgtop2-2. + * Updated Build-Depends. + * Improved 'debian/copyright'. + * 'debian/control', 'debian/changelog' and 'debian/copyright' are now + UTF-8 encoded. + + -- Marc Dequènes (Duck) Sun, 28 Mar 2004 23:02:47 +0200 + +gnome-applets (2.6.0-1) experimental; urgency=low + + * New maintainer (Closes: 238880). + * New upstream release + * Fixed in new release : + + sticky-notes is working again (Closes: 238445). + + gweather now display '--' when temperature not available (Closes: + 239113). + + Disk Mounter USB stick icon available (Closes: 225122). + + 'debian/prerm' typo error obsoleted by new packaging (Closes: + 235685). + * Switched to compatility level 4. + * Now using CDBS. + * Removed obsolete 'prerm' & 'postrm' and cleaned 'postinst'. + * Removed silly CM 'README.Debian'. + + -- Marc Dequènes (Duck) Sat, 27 Mar 2004 23:20:58 +0100 + +gnome-applets (2.4.2-5) unstable; urgency=low + + * debian/control set Maintainer to Debian QA Group + + -- Christian Marillat Sat, 20 Mar 2004 09:48:44 +0100 + +gnome-applets (2.4.2-4) unstable; urgency=low + + * all my + + -- Christian Marillat Fri, 19 Mar 2004 15:25:44 +0100 + +gnome-applets (2.4.2-3) unstable; urgency=low + + * Split the package in two packages one package with binaries another one + with data (Closes: #233362) + * Fix typo in prerm script. + + -- Christian Marillat Sun, 22 Feb 2004 16:01:03 +0100 + +gnome-applets (2.4.2-2) unstable; urgency=low + + * Add acpid in suggests (Closes: #230867) + * Remove DTD hack and update scrollkeeper dependency to 0.3.14-5 + + -- Christian Marillat Sun, 8 Feb 2004 10:47:48 +0100 + +gnome-applets (2.4.2-1) unstable; urgency=low + + * New upstream release. + * Call mc-install-default-macros in postinst to install default macros for + mini-commander. + * Remove 03_acpi and 05_omf patches included by upstream + + -- Christian Marillat Fri, 16 Jan 2004 22:23:56 +0100 + +gnome-applets (2.4.0-5) unstable; urgency=low + + * debian/prerm Unregister schemas file from the database. + + -- Christian Marillat Fri, 9 Jan 2004 15:46:37 +0100 + +gnome-applets (2.4.0-4) unstable; urgency=low + + * Update depends on gnome-panel to 2.4.0 + * Rewrote patch 04_modemlights, was broken in -3 (Closes: #224198) + + -- Christian Marillat Tue, 30 Dec 2003 22:52:41 +0100 + +gnome-applets (2.4.0-3) unstable; urgency=low + + * New patch to fix build problem with later kernel-headers package + (Closes: #221874) + * New patch to fix broken omf file (Closes: #218916) + + -- Christian Marillat Sun, 7 Dec 2003 12:03:17 +0100 + +gnome-applets (2.4.0-2) unstable; urgency=low + + * Update Build-Depends to GNOME 2.4 packages (Closes: #217580) + * Patch from bugzilla to fix acpi in batstat applet (CLoses: #212969) + + -- Christian Marillat Sun, 26 Oct 2003 09:20:02 +0100 + +gnome-applets (2.4.0-1) unstable; urgency=low + + * New upstream release. + * Imporve description for new applets (Stickynotes, accessx-status and mailcheck) + + -- Christian Marillat Sat, 18 Oct 2003 15:36:53 +0200 + +gnome-applets (2.2.3-1) unstable; urgency=low + + * New upstream release. + + -- Christian Marillat Wed, 24 Sep 2003 15:10:51 +0200 + +gnome-applets (2.2.2-2) unstable; urgency=low + + * Improve battstats description (Closes: #201268) + * For now, remove broken omf files (unmaintained by upstream) (Closes: #195939) + + -- Christian Marillat Tue, 22 Jul 2003 16:05:16 +0200 + +gnome-applets (2.2.2-1) unstable; urgency=low + + * New upstream release. + + -- Christian Marillat Sun, 18 May 2003 19:28:21 +0200 + +gnome-applets (2.2.1-2) unstable; urgency=low + + * Fix wrong install path (Closes: #184876, #184658) + * Update libgnomeui-dev build-dependency to 2.2.0.1-2 (Closes: #185104) + + -- Christian Marillat Mon, 17 Mar 2003 08:25:38 +0100 + +gnome-applets (2.2.1-1) unstable; urgency=low + + * New upstream release. + + -- Christian Marillat Mon, 10 Mar 2003 21:20:48 +0100 + +gnome-applets (2.2.0-1) unstable; urgency=low + + * New upstream release. + * Move mc-install-default-macros in /usr/lib/gnome-panel + * Remove mixer patch included by upstream. + * Need to Build-Depends on libapm-dev + * Weather applet apply changes immediately (Closes: #135788) + + -- Christian Marillat Sun, 26 Jan 2003 19:52:42 +0100 + +gnome-applets (2.1.3-1) unstable; urgency=low + + * New upstream release. + * Bump Standards-Version to 3.5.8 + * Remove acpi patche included by upstream. + * Move applets binaries in /usr/lib/gnome-panel + * Update description, new wireless applet. + + -- Christian Marillat Fri, 17 Jan 2003 22:14:25 +0100 + +gnome-applets (2.0.4-1) unstable; urgency=low + + * New upstream release. + * Remove previous acpi patche and acpi dependency. Add a new patche from + http://cvs.gentoo.org/~hanno/ + Should (Closes: #168283, #169496, #169753, #169944) + + -- Christian Marillat Fri, 22 Nov 2002 14:16:40 +0100 + +gnome-applets (2.0.3-7) unstable; urgency=low + + * Patch from Itay Ben-Yaacov to use the acpi backend instead of the broken + acpi code in the battstat applet (Closes: #168283) + + -- Christian Marillat Fri, 15 Nov 2002 17:53:24 +0100 + +gnome-applets (2.0.3-6) unstable; urgency=low + + * Add a conflicts for battstat-applet (Closes: #167871) + + -- Christian Marillat Tue, 5 Nov 2002 16:02:01 +0100 + +gnome-applets (2.0.3-5) unstable; urgency=low + + * Upload to unstable + * Mixer applet work with devfs (Closes: #146028) + * No more problem with the mini-commander and focus (Closes: #115704, #116986) + * The gnotes applet has been removed (Closes: #143353) + * The tick-a-stat applet has been removed (Closes: #149408, #105225) + * Now you can add an URL for radar map in the gweather applet (Closes: #111974) + * ACPI support for battstat applet (Closes: #144604) + * Diskusage applet has been removed (Closes: #147074) + * gweather now display pressure in the right unit (Closes: #97137) + * No more redraw problem with battstat (Closes: #99488) + * Same as above but for the gweather applet (Closes: #106290, #126256) + * Typo fixed in German translation for modemlights (Closes: #111906) + * Gweather should uses non-blocking network I/O (Closes: #131624) + * mini-commander properties box can be resized (Closes: #83068) + + -- Christian Marillat Mon, 28 Oct 2002 15:17:22 +0100 + +gnome-applets (2.0.3-4) experimental; urgency=low + + * Apply patch from Chris Hanson to not reset the speaker volume in the + mixer applet (Closes: #164949) + * Apply patche from James D Strandboge to fix ACPI in battstat applet + (Closes: #152183) + + -- Christian Marillat Wed, 23 Oct 2002 20:25:12 +0200 + +gnome-applets (2.0.3-3) experimental; urgency=low + + * Upload with original tarball + + -- Christian Marillat Sun, 29 Sep 2002 17:54:44 +0200 + +gnome-applets2 (2.0.3-2) experimental; urgency=low + + * Upload without the 2 suffix + + -- Christian Marillat Sat, 28 Sep 2002 19:02:48 +0200 + +gnome-applets2 (2.0.3-1) experimental; urgency=low + + * New upstream release. + * Update to standards version 3.5.7 + + -- Christian Marillat Sun, 15 Sep 2002 17:15:42 +0200 + +gnome-applets2 (2.0.2-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Tue, 27 Aug 2002 11:18:15 +0200 + +gnome-applets2 (2.0.1-4) experimental; urgency=low + + * Build against the latest libgnomevfs2-dev 2.0.2-4 + + -- Christian Marillat Fri, 16 Aug 2002 17:50:58 +0200 + +gnome-applets2 (2.0.1-3) experimental; urgency=low + + * Replace pppon/pppoff by pon/poff in modemlights applet. + * Rebuild against the latest libgtk 2.0.6 + + -- Christian Marillat Tue, 13 Aug 2002 15:45:20 +0200 + +gnome-applets2 (2.0.1-2) experimental; urgency=low + + * Cleanup the diff (remove omf, server.in, server files) (Closes: #154120) + + -- Christian Marillat Tue, 23 Jul 2002 15:51:03 +0200 + +gnome-applets2 (2.0.1-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Sun, 21 Jul 2002 19:53:44 +0200 + +gnome-applets2 (2.0.0-2) experimental; urgency=low + + * Fix broken omf files (Closes: #153659) + + -- Christian Marillat Sat, 20 Jul 2002 19:09:27 +0200 + +gnome-applets2 (2.0.0-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Tue, 11 Jun 2002 16:18:18 +0200 + +gnome-applets2 (1.105.0-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Mon, 3 Jun 2002 16:53:17 +0200 + +gnome-applets2 (1.104.0-1) experimental; urgency=low + + * New upstream release. + * Remove call Internet DTD. + + -- Christian Marillat Tue, 28 May 2002 20:35:15 +0200 + +gnome-applets2 (1.103.0-2) experimental; urgency=low + + * debian/rules Add GCONF_DISABLE_MAKEFILE_SCHEMA_INSTALL=1 in install target. + * debian/postinst check if schemas files are present before calling + gconftool-2 + + -- Christian Marillat Mon, 27 May 2002 15:53:46 +0200 + +gnome-applets2 (1.103.0-1) experimental; urgency=low + + * new upstream release. + + -- Christian Marillat Tue, 21 May 2002 14:38:17 +0200 + +gnome-applets2 (1.102.1-1) experimental; urgency=low + + * New upstream release. + * Add support for DEB_HOST_GNU_TYPE DEB_BUILD_GNU_TYPE and + DEB_BUILD_OPTIONS + + -- Christian Marillat Wed, 15 May 2002 21:53:06 +0200 + +gnome-applets2 (1.101.0-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Sun, 12 May 2002 14:41:55 +0200 + +gnome-applets2 (1.100.0-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Mon, 29 Apr 2002 21:14:09 +0200 + +gnome-applets2 (1.99.0-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Wed, 17 Apr 2002 16:23:56 +0200 + +gnome-applets2 (1.98.0-1) experimental; urgency=low + + * News upstream release. + + -- Christian Marillat Sun, 14 Apr 2002 18:12:50 +0200 + +gnome-applets2 (1.96.0-1) experimental; urgency=low + + * New upstream release. + * Added scrollkeeper support in postinst/postrm + + -- Christian Marillat Mon, 11 Mar 2002 14:16:12 +0100 + +gnome-applets2 (1.95.0-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Tue, 5 Mar 2002 16:48:38 +0100 + +gnome-applets2 (1.94.0-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Mon, 25 Feb 2002 14:21:04 +0100 + +gnome-applets2 (1.93.0-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Mon, 18 Feb 2002 14:30:43 +0100 + +gnome-applets2 (1.92.2-1) experimental; urgency=low + + * New upstream release + + -- Christian Marillat Fri, 15 Feb 2002 00:33:38 +0100 + +gnome-applets2 (1.90.1-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Sun, 20 Jan 2002 15:49:42 +0100 + +gnome-applets (1.4.0.4-2) unstable; urgency=low + + * debian/control replace xml-i18n-tools by intltool + * debian/control Spell check (Closes: #124683) + * Clicking on gweather brings up detailed forecast (Closes: #90911) + * New patch against the battery applet to enable ACPI support. Thanks to + Matthew Danish (Closes: #116467) + + -- Christian Marillat Sat, 22 Dec 2001 19:23:35 +0100 + +gnome-applets (1.4.0.4-1) unstable; urgency=low + + * New upstream release. + * Fix typo in description (Closes: #110464) + * Fix some typos in sgml files + + -- Christian Marillat Wed, 5 Sep 2001 17:33:10 +0200 + +gnome-applets (1.4.0.3-1) unstable; urgency=low + + * New upstream release. + * debian/*.sgml Use docbook 4.1 + + -- Christian Marillat Fri, 10 Aug 2001 16:50:00 +0200 + +gnome-applets (1.4.0.2-1) unstable; urgency=low + + * New upstream release. + * Switch to debhelper V3 + * Removed mixer patch included by upstream. + * Update config.{guess,sub} we never know :) + * Patch against cpumemusage/proc.c to call the right libgtop function (Closes: #102466) + * slash_applet background not harcoded (Closes: #96113) + * In multiload_applet speed is replaced by interval (Closes: #75780) + + -- Christian Marillat Thu, 12 Jul 2001 23:14:09 +0200 + +gnome-applets (1.4.0.1-2) unstable; urgency=low + + * Add replace sound-monitor (Closes: #97791) + + -- Christian Marillat Thu, 17 May 2001 14:55:25 +0200 + +gnome-applets (1.4.0.1-1) unstable; urgency=low + + * New upstream release. + + -- Christian Marillat Wed, 9 May 2001 16:37:10 +0200 + +gnome-applets (1.4.0-2) unstable; urgency=low + + * Build depends on scrollkeeper (Closes: #93979) + + -- Christian Marillat Sat, 14 Apr 2001 20:48:23 +0200 + +gnome-applets (1.4.0-1) unstable; urgency=low + + * New upstream release. + + -- Christian Marillat Mon, 19 Mar 2001 12:11:23 +0100 + +gnome-applets (1.3.1-1) unstable; urgency=low + + * New upstream release + * debian/control Add xml-i18n-tools and scrollkeeper in build-depends + * debian/control Add scrollkeeper in depends + * debian/{postinst,prerm} Call scrollkeeper-update. + * New patch applet-docs.make for scrollkeeper + * gweather doesn't eats up cpu time (Closes: #87370) + * mini commander doesn't hangs on empty command line (Closes: #84293) + * mini commander now save its properties (Closes: #81602) + * The mixer applet works on PPC (Closes: #71681) + * New patch, make slashdot the default for the slashapp applet (Closes: #88459) + * I wrote 31 manpages then add docbook-to-man in build depends (Closes: #86974) + + -- Christian Marillat Tue, 6 Mar 2001 19:08:52 +0100 + +gnome-applets (1.2.4-5) unstable; urgency=low + + * Add libzvt-dev in build-depends (Closes: #87065) + + -- Christian Marillat Fri, 23 Feb 2001 09:38:02 +0100 + +gnome-applets (1.2.4-4) unstable; urgency=low + + * Build against the latest gnome-libs 1.2.11 + + -- Christian Marillat Wed, 14 Feb 2001 14:12:29 +0100 + +gnome-applets (1.2.4-3) unstable; urgency=low + + * debian/control Add recommends imagemagick (Closes: #82955, #83229) + + -- Christian Marillat Sat, 20 Jan 2001 15:02:46 +0100 + +gnome-applets (1.2.4-2) unstable; urgency=low + + * Apply patch for mixer on PPC (Closes: #78268) + + -- Christian Marillat Wed, 6 Dec 2000 21:54:49 +0100 + +gnome-applets (1.2.4-1) unstable; urgency=low + + * New upstream release. + * Corrected spanish locale (Closes: #74536) + * Disk usage applet show correct free space (Closes: #75407) + + -- Christian Marillat Thu, 16 Nov 2000 01:37:57 +0100 + +gnome-applets (1.2.3-1) unstable; urgency=low + + * New upstream release. + + -- Christian Marillat Tue, 24 Oct 2000 11:35:12 +0200 + +gnome-applets (1.2.2-1) unstable; urgency=low + + * New upstream release + * Switch to debhelper V2 + * gkb_applet now save his state between session (Closes: #71070) + + -- Christian Marillat Tue, 26 Sep 2000 15:22:22 +0200 + +gnome-applets (1.2.1-1) unstable; urgency=low + + * New upstream release (Closes: #69690). + * Add modemlights patch. + * Rewrote debian/control (Closes: #68035). + * debian/control add asclock-themes in the depends field. + + -- Christian Marillat Tue, 22 Aug 2000 13:05:10 +0200 + +gnome-applets (1.2.0-1) unstable; urgency=low + + * Initial Release. + * This package close all these bugs in gnome-core: + Closes: #46253, #63561, #46251, #36537, #38434, #45286, #45791, #49718, + #52609, #53125, #54865, #54866, #59080, #60057, #60938, #61611, #62114, + #63215, #64350, #64475, #66666, #66840, #59292, #65858, #57414 + + -- Christian Marillat Wed, 26 Jul 2000 11:35:25 +0200 + + --- gnome-applets-2.28.0.orig/debian/gnome-applets-data.install +++ gnome-applets-2.28.0/debian/gnome-applets-data.install @@ -0,0 +1,4 @@ +debian/tmp/etc/ +debian/tmp/usr/lib/bonobo/ +debian/tmp/usr/share/ +debian/tmp/usr/lib/python* --- gnome-applets-2.28.0.orig/debian/gnome-applets.preinst +++ gnome-applets-2.28.0/debian/gnome-applets.preinst @@ -0,0 +1,15 @@ +#!/bin/sh +set -e + +prog=/usr/bin/cpufreq-selector + +case "$1" in +install|upgrade) + if dpkg --compare-versions "$2" lt-nl "2.24"; then + if dpkg-statoverride --list $prog > /dev/null; then + dpkg-statoverride --remove $prog + fi; + fi +esac + +#DEBHELPER# --- gnome-applets-2.28.0.orig/debian/cpufreq-selector.sgml +++ gnome-applets-2.28.0/debian/cpufreq-selector.sgml @@ -0,0 +1,160 @@ + manpage.1'. You may view + the manual page with: `docbook-to-man manpage.sgml | nroff -man | + less'. A typical entry in a Makefile or Makefile.am is: + +manpage.1: manpage.sgml + docbook-to-man $< > $@ + + + The docbook-to-man binary is found in the docbook-to-man package. + Please remember that if you create the nroff version in one of the + debian/rules file targets (such as build), you will need to include + docbook-to-man in your Build-Depends control field. + + --> + + + Theppitak"> + Karoonboonyanan"> + + Mar 23, 2007"> + + 1"> + thep@linux.thai.net"> + + cpufreq-selector"> + + + Debian"> + GNU"> + GPL"> +]> + + + +
+ &dhemail; +
+ + &dhfirstname; + &dhsurname; + + + 2003 + &dhusername; + + &dhdate; + + + &dhucpackage; + + &dhsection; + + + &dhpackage; + + tool to set CPU frequency + + + + &dhpackage; + + + + + + + + + DESCRIPTION + + &dhpackage; is a command-line tool for choosing + CPU frequency settings. + + + + OPTIONS + + This program follows the usual &gnu; command line syntax, + with long options starting with two dashes (`-'). A summary of + options is included below. + + + + , + + + + Show summary of options. + + + + , + + + + number of CPU to set. If omitted, zeroth CPU is implied. + + + + , + + + + CPU governor to use, such as powersave, + performance. + + + + , + + + + CPU frequency to use, in kHz. + + + + + + AUTHOR + + &dhpackage;, as part of gnome-applets, was written by Carlos García + Campos carlosgc@gnome.org and other GNOME contributors. + + + This manual page was written by &dhusername; &dhemail; for + the &debian; system (but may be used by others). Permission is + granted to copy, distribute and/or modify this document under + the terms of the &gnu; General Public License, Version 2 any + later version published by the Free Software Foundation. + + + On Debian systems, the complete text of the GNU General Public + License can be found in /usr/share/common-licenses/GPL. + + + + + + + + --- gnome-applets-2.28.0.orig/debian/gnome-applets.gconf-defaults +++ gnome-applets-2.28.0/debian/gnome-applets.gconf-defaults @@ -0,0 +1,2 @@ +/apps/battstat-applet/prefs/show_battery false +/apps/drivemount-applet/prefs/mount_point /media/floppy --- gnome-applets-2.28.0.orig/debian/gnome-applets.manpages +++ gnome-applets-2.28.0/debian/gnome-applets.manpages @@ -0,0 +1,12 @@ +man/cdplayer_applet.1 +man/charpick_applet.1 +man/drivemount_applet.1 +man/geyes_applet.1 +man/gkb_applet.1 +man/gkb_xmmap.1 +man/gweather.1 +man/modemlights_applet.1 +man/multiload_applet.1 +man/screenshooter_applet.1 +man/sound-monitor_applet.1 +man/whereami_applet.1 --- gnome-applets-2.28.0.orig/debian/gnome-applets.install +++ gnome-applets-2.28.0/debian/gnome-applets.install @@ -0,0 +1,2 @@ +debian/tmp/usr/bin/ +debian/tmp/usr/lib/gnome-applets/ --- gnome-applets-2.28.0.orig/debian/pyversions +++ gnome-applets-2.28.0/debian/pyversions @@ -0,0 +1 @@ +2.4- --- gnome-applets-2.28.0.orig/debian/control.in +++ gnome-applets-2.28.0/debian/control.in @@ -0,0 +1,132 @@ +Source: gnome-applets +Section: gnome +Priority: optional +Maintainer: Ubuntu Desktop Team +XSBC-Original-Maintainer: Guilherme de S. Pastore +Uploaders: @GNOME_TEAM@ +Vcs-Bzr: https://code.launchpad.net/~ubuntu-desktop/gnome-applets/ubuntu +Standards-Version: 3.8.3 +Build-Depends: cdbs (>= 0.4.41), + autotools-dev, + debhelper (>= 5.0.13), + quilt, + patchutils, + libgtk2.0-dev (>= 2.13.0), + libglib2.0-dev (>= 2.18.0), + libgconf2-dev (>= 2.8.0), + scrollkeeper (>= 0.1.4) | rarian-compat, + libpanel-applet2-dev (>= 2.13.4), + libgtop2-dev (>= 2.11.92), + libxklavier-dev (>= 4.0), + libwnck-dev (>= 2.9.3), + libgnome-desktop-dev (>= 2.11.1), + libnotify-dev (>= 0.3.2), + libdbus-1-dev (>= 1.1.2), + libdbus-glib-1-dev (>= 0.74), + python-gtk2-dev (>= 2.6), + python-gobject-dev (>= 2.6), + python-gnome2-dev (>= 2.10), + gnome-icon-theme (>= 2.15.91), + libxml2-dev (>= 2.5.0), + libgweather-dev (>= 2.22.1), + libgucharmap2-dev (>= 1:2.23.0), + libpolkit-gobject-1-dev (>= 0.92), + intltool (>= 0.35.0), + python-dev (>= 2.4), + libxt-dev, + libx11-dev, + libgnomekbd-dev (>= 2.24), + gnome-settings-daemon-dev, + xsltproc, + docbook-xsl, + docbook-to-man, + docbook-utils, + gnome-doc-utils (>= 0.3.2), + network-manager-dev (>= 0.7) | not+linux-gnu, + x11proto-kb-dev, + python-gnome2-desktop-dev, + gnome-pkg-tools (>= 0.10), + dpkg-dev (>= 1.13.19), + sharutils, + python-support (>= 0.4) + +Package: gnome-applets-data +Architecture: all +Pre-Depends: dpkg (>= 1.10.24) +Depends: ${misc:Depends}, + ${python:Depends} +Replaces: trashapplet +Description: Various applets for the GNOME panel - data files + This package contains data files (pixmaps, icons, documentations) needed by + the gnome-applets package. + +Package: gnome-applets +Architecture: any +Pre-Depends: dpkg (>= 1.10.24) +Depends: ${shlibs:Depends}, + ${misc:Depends}, + gnome-applets-data (>= ${gnome:Version}), + gnome-applets-data (<< ${gnome:NextVersion}), + gnome-panel (>= 2.13.4), + gnome-icon-theme (>= 2.15.91), + ${python:Depends}, + gvfs +Conflicts: trashapplet +Replaces: trashapplet +Provides: trashapplet +Recommends: gnome-system-monitor, + gnome-media, + python-gconf, + python-gnome2, + python-gnomeapplet, + python-gobject, + python-gtk2, + policykit-1-gnome +Suggests: acpid, + tomboy, + gnome-netstatus-applet, + deskbar-applet, + cpufrequtils +Description: Various applets for the GNOME panel - binary files + accessx-status: indicates keyboard accessibility settings, including + the current state of the keyboard, if those features are in use. + . + Battstat: monitors the power subsystem on a laptop. + . + Character palette: provides a convenient way to access non-standard + characters, such as accented characters, mathematical symbols, special + symbols, and punctuation marks. + . + GNOME CPUFreq Applet: CPU frequency scaling monitor + . + Drivemount: lets you mount and unmount drives and file systems. + . + Geyes: pair of eyes which follow the mouse pointer around the screen. + . + Keyboard layout switcher: lets you assign different keyboard + layouts for different locales. + . + Modem Monitor: monitors the modem. + . + Invest: downloads current stock quotes from the Internet and displays + the quotes in a scrolling display in the applet. The applet downloads the + stock information from Yahoo! Finance. + . + System monitor: CPU, memory, network, swap file and resource. + . + Trash: lets you drag items to the trash folder. + . + Weather report: downloads weather information from the U.S National Weather + Service (NWS) servers, including the Interactive Weather Information + Network (IWIN). + +Package: gnome-applets-dbg +Section: debug +Architecture: any +Pre-Depends: dpkg (>= 1.10.24) +Priority: extra +Depends: ${shlibs:Depends}, + ${misc:Depends}, + gnome-applets (= ${binary:Version}) +Description: Various applets for the GNOME panel - binary files with debugging symbols + This package contains unstripped binaries used for debugging. --- gnome-applets-2.28.0.orig/debian/watch +++ gnome-applets-2.28.0/debian/watch @@ -0,0 +1,2 @@ +version=3 +ftp://ftp.gnome.org/pub/GNOME/sources/gnome-applets/([\d\.]+)[0123456789]/gnome-applets-(.*)\.tar\.gz --- gnome-applets-2.28.0.orig/debian/rules +++ gnome-applets-2.28.0/debian/rules @@ -0,0 +1,46 @@ +#!/usr/bin/make -f + +include /usr/share/cdbs/1/rules/debhelper.mk +include /usr/share/cdbs/1/rules/patchsys-quilt.mk +include /usr/share/cdbs/1/class/gnome.mk +include /usr/share/gnome-pkg-tools/1/rules/uploaders.mk +include /usr/share/gnome-pkg-tools/1/rules/gnome-version.mk +-include /usr/share/gnome-pkg-tools/1/rules/gnome-get-source.mk + +LDFLAGS += -Wl,-z,defs -Wl,-O1 -Wl,--as-needed + +DEB_CONFIGURE_EXTRA_FLAGS += --disable-gtk-doc --disable-scrollkeeper --enable-ipv6 --disable-battstat + +ifeq ($(DEB_HOST_ARCH_OS),kfreebsd) +DEB_CONFIGURE_EXTRA_FLAGS += --disable-battstat +endif + +DEB_DH_BUILDDEB_ARGS := -- -Zbzip2 + +DEB_MAKE_ENVVARS += echo=/bin/echo + +MANPAGES += debian/gnome-keyboard-layout.1 debian/cpufreq-selector.1 +DEB_INSTALL_MANPAGES_gnome-applets = $(MANPAGES) + +DEB_DH_STRIP_ARGS += --dbg-package=gnome-applets-dbg + +# Build manual pages +build/gnome-applets:: $(MANPAGES) + +debian/gnome-keyboard-layout.1: debian/gnome-keyboard-layout.xml + xsltproc -nonet -o $@ /usr/share/sgml/docbook/stylesheet/xsl/nwalsh/manpages/docbook.xsl $< + +debian/cpufreq-selector.1: debian/cpufreq-selector.sgml + docbook-to-man $< > $@ + +binary-install/gnome-applets:: + rm -rf debian/gnome-applets/usr/lib/gnome-applets/gnome-applets/ + chmod a+x debian/gnome-applets/usr/bin/* debian/gnome-applets/usr/lib/gnome-applets/* + dh_pysupport -pgnome-applets + +binary-install/gnome-applets-data:: + find debian/gnome-applets-data/usr/share -type f -exec chmod -R a-x {} \; + dh_pysupport -pgnome-applets-data + +clean:: + rm -f $(MANPAGES) --- gnome-applets-2.28.0.orig/debian/control +++ gnome-applets-2.28.0/debian/control @@ -0,0 +1,137 @@ +# This file is autogenerated. DO NOT EDIT! +# +# Modifications should be made to debian/control.in instead. +# This file is regenerated automatically in the clean target. + +Source: gnome-applets +Section: gnome +Priority: optional +Maintainer: Ubuntu Desktop Team +XSBC-Original-Maintainer: Guilherme de S. Pastore +Uploaders: Debian GNOME Maintainers , Emilio Pozuelo Monfort , Gustavo Noronha Silva , Josselin Mouette +Vcs-Bzr: https://code.launchpad.net/~ubuntu-desktop/gnome-applets/ubuntu +Standards-Version: 3.8.3 +Build-Depends: cdbs (>= 0.4.41), + autotools-dev, + debhelper (>= 5.0.13), + quilt, + patchutils, + libgtk2.0-dev (>= 2.13.0), + libglib2.0-dev (>= 2.18.0), + libgconf2-dev (>= 2.8.0), + scrollkeeper (>= 0.1.4) | rarian-compat, + libpanel-applet2-dev (>= 2.13.4), + libgtop2-dev (>= 2.11.92), + libxklavier-dev (>= 4.0), + libwnck-dev (>= 2.9.3), + libgnome-desktop-dev (>= 2.11.1), + libnotify-dev (>= 0.3.2), + libdbus-1-dev (>= 1.1.2), + libdbus-glib-1-dev (>= 0.74), + python-gtk2-dev (>= 2.6), + python-gobject-dev (>= 2.6), + python-gnome2-dev (>= 2.10), + gnome-icon-theme (>= 2.15.91), + libxml2-dev (>= 2.5.0), + libgweather-dev (>= 2.22.1), + libgucharmap2-dev (>= 1:2.23.0), + libpolkit-gobject-1-dev (>= 0.92), + intltool (>= 0.35.0), + python-dev (>= 2.4), + libxt-dev, + libx11-dev, + libgnomekbd-dev (>= 2.24), + gnome-settings-daemon-dev, + xsltproc, + docbook-xsl, + docbook-to-man, + docbook-utils, + gnome-doc-utils (>= 0.3.2), + network-manager-dev (>= 0.7) | not+linux-gnu, + x11proto-kb-dev, + python-gnome2-desktop-dev, + gnome-pkg-tools (>= 0.10), + dpkg-dev (>= 1.13.19), + sharutils, + python-support (>= 0.4) + +Package: gnome-applets-data +Architecture: all +Pre-Depends: dpkg (>= 1.10.24) +Depends: ${misc:Depends}, + ${python:Depends} +Replaces: trashapplet +Description: Various applets for the GNOME panel - data files + This package contains data files (pixmaps, icons, documentations) needed by + the gnome-applets package. + +Package: gnome-applets +Architecture: any +Pre-Depends: dpkg (>= 1.10.24) +Depends: ${shlibs:Depends}, + ${misc:Depends}, + gnome-applets-data (>= ${gnome:Version}), + gnome-applets-data (<< ${gnome:NextVersion}), + gnome-panel (>= 2.13.4), + gnome-icon-theme (>= 2.15.91), + ${python:Depends}, + gvfs +Conflicts: trashapplet +Replaces: trashapplet +Provides: trashapplet +Recommends: gnome-system-monitor, + gnome-media, + python-gconf, + python-gnome2, + python-gnomeapplet, + python-gobject, + python-gtk2, + policykit-1-gnome +Suggests: acpid, + tomboy, + gnome-netstatus-applet, + deskbar-applet, + cpufrequtils +Description: Various applets for the GNOME panel - binary files + accessx-status: indicates keyboard accessibility settings, including + the current state of the keyboard, if those features are in use. + . + Battstat: monitors the power subsystem on a laptop. + . + Character palette: provides a convenient way to access non-standard + characters, such as accented characters, mathematical symbols, special + symbols, and punctuation marks. + . + GNOME CPUFreq Applet: CPU frequency scaling monitor + . + Drivemount: lets you mount and unmount drives and file systems. + . + Geyes: pair of eyes which follow the mouse pointer around the screen. + . + Keyboard layout switcher: lets you assign different keyboard + layouts for different locales. + . + Modem Monitor: monitors the modem. + . + Invest: downloads current stock quotes from the Internet and displays + the quotes in a scrolling display in the applet. The applet downloads the + stock information from Yahoo! Finance. + . + System monitor: CPU, memory, network, swap file and resource. + . + Trash: lets you drag items to the trash folder. + . + Weather report: downloads weather information from the U.S National Weather + Service (NWS) servers, including the Interactive Weather Information + Network (IWIN). + +Package: gnome-applets-dbg +Section: debug +Architecture: any +Pre-Depends: dpkg (>= 1.10.24) +Priority: extra +Depends: ${shlibs:Depends}, + ${misc:Depends}, + gnome-applets (= ${binary:Version}) +Description: Various applets for the GNOME panel - binary files with debugging symbols + This package contains unstripped binaries used for debugging. --- gnome-applets-2.28.0.orig/debian/gnome-keyboard-layout.xml +++ gnome-applets-2.28.0/debian/gnome-keyboard-layout.xml @@ -0,0 +1,100 @@ + +.
will be generated. You may view the +manual page with: nroff -man .
| less'. A +typical entry in a Makefile or Makefile.am is: + +DB2MAN=/usr/share/sgml/docbook/stylesheet/xsl/nwalsh/\ +manpages/docbook.xsl +XP=xsltproc -''-nonet + +manpage.1: manpage.dbk + $(XP) $(DB2MAN) $< + +The xsltproc binary is found in the xsltproc package. The +XSL files are in docbook-xsl. Please remember that if you +create the nroff version in one of the debian/rules file +targets (such as build), you will need to include xsltproc +and docbook-xsl in your Build-Depends control field. + +--> + + + Marc"> + Dequènes"> + + 2004-03-28"> + + 1"> + Duck@DuckCorp.org"> + + GNOME-KEYBOARD-LAYOUT"> + + + Debian"> + GNU"> + GPL"> +]> + + + +
+ &dhemail; +
+ + &dhfirstname; + &dhsurname; + + + 2003 + &dhusername; + + &dhdate; + + + &dhucpackage; + + &dhsection; + + + &dhpackage; + + Keyboard layout selector for the GNOME desktop. + + + + &dhpackage; + + + + DESCRIPTION + + &dhpackage; is a customisable keyboard + layout selector. + + + + AUTHOR + + This manual page was written by &dhusername; &dhemail; for + the &debian; system (but may be used by others). Permission is + granted to copy, distribute and/or modify this document under + the terms of the &gnu; General Public License, Version 2 any + later version published by the Free Software Foundation. + + + On Debian systems, the complete text of the GNU General Public + License can be found in /usr/share/common-licenses/GPL. + + + + + --- gnome-applets-2.28.0.orig/debian/patches/98_autoreconf.patch +++ gnome-applets-2.28.0/debian/patches/98_autoreconf.patch @@ -0,0 +1,32588 @@ +diff -Nur gnome-applets-2.28.0/accessx-status/docs/Makefile.in gnome-applets-2.28.0.ubuntu/accessx-status/docs/Makefile.in +--- gnome-applets-2.28.0/accessx-status/docs/Makefile.in 2009-09-21 08:19:31.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/accessx-status/docs/Makefile.in 2009-09-21 12:06:42.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -38,8 +39,9 @@ + + ################################################################################ + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -70,6 +72,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +@@ -201,6 +204,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -429,9 +433,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu accessx-status/docs/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu accessx-status/docs/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu accessx-status/docs/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu accessx-status/docs/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -449,6 +453,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + mostlyclean-libtool: + -rm -f *.lo +@@ -478,13 +483,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -515,6 +524,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -533,6 +543,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -541,18 +553,28 @@ + + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -963,6 +985,7 @@ + dist-hook: doc-dist-hook + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/accessx-status/Makefile.in gnome-applets-2.28.0.ubuntu/accessx-status/Makefile.in +--- gnome-applets-2.28.0/accessx-status/Makefile.in 2009-09-21 08:19:31.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/accessx-status/Makefile.in 2009-09-21 12:06:42.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -16,8 +17,9 @@ + + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -49,9 +51,9 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + am__installdirs = "$(DESTDIR)$(libexecdir)" "$(DESTDIR)$(serverdir)" \ + "$(DESTDIR)$(uidir)" +-libexecPROGRAMS_INSTALL = $(INSTALL_PROGRAM) + PROGRAMS = $(libexec_PROGRAMS) + am_accessx_status_applet_OBJECTS = applet.$(OBJEXT) + accessx_status_applet_OBJECTS = $(am_accessx_status_applet_OBJECTS) +@@ -61,6 +63,7 @@ + DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles ++am__mv = mv -f + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) + LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +@@ -84,16 +87,57 @@ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +-serverDATA_INSTALL = $(INSTALL_DATA) +-uiDATA_INSTALL = $(INSTALL_DATA) ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' + DATA = $(server_DATA) $(ui_DATA) + RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive ++AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ ++ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ ++ distdir + ETAGS = etags + CTAGS = ctags + DIST_SUBDIRS = $(SUBDIRS) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++am__relativize = \ ++ dir0=`pwd`; \ ++ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ ++ sed_rest='s,^[^/]*/*,,'; \ ++ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ ++ sed_butlast='s,/*[^/]*$$,,'; \ ++ while test -n "$$dir1"; do \ ++ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ ++ if test "$$first" != "."; then \ ++ if test "$$first" = ".."; then \ ++ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ ++ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ ++ else \ ++ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ ++ if test "$$first2" = "$$first"; then \ ++ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ ++ else \ ++ dir2="../$$dir2"; \ ++ fi; \ ++ dir0="$$dir0"/"$$first"; \ ++ fi; \ ++ fi; \ ++ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ ++ done; \ ++ reldir="$$dir2" + pkgdatadir = @pkgdatadir@ + ACLOCAL = @ACLOCAL@ + ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@ +@@ -222,6 +266,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -360,9 +405,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu accessx-status/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu accessx-status/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu accessx-status/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu accessx-status/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -380,34 +425,50 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + install-libexecPROGRAMS: $(libexec_PROGRAMS) + @$(NORMAL_INSTALL) + test -z "$(libexecdir)" || $(MKDIR_P) "$(DESTDIR)$(libexecdir)" +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- if test -f $$p \ +- || test -f $$p1 \ +- ; then \ +- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(libexecdir)/$$f'"; \ +- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(libexecdir)/$$f" || exit 1; \ +- else :; fi; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed 's/$(EXEEXT)$$//' | \ ++ while read p p1; do if test -f $$p || test -f $$p1; \ ++ then echo "$$p"; echo "$$p"; else :; fi; \ ++ done | \ ++ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ ++ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ ++ sed 'N;N;N;s,\n, ,g' | \ ++ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ ++ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ ++ if ($$2 == $$4) files[d] = files[d] " " $$1; \ ++ else { print "f", $$3 "/" $$4, $$1; } } \ ++ END { for (d in files) print "f", d, files[d] }' | \ ++ while read type dir files; do \ ++ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ ++ test -z "$$files" || { \ ++ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(libexecdir)$$dir'"; \ ++ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(libexecdir)$$dir" || exit $$?; \ ++ } \ ++ ; done + + uninstall-libexecPROGRAMS: + @$(NORMAL_UNINSTALL) +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " rm -f '$(DESTDIR)$(libexecdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(libexecdir)/$$f"; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ ++ files=`for p in $$list; do echo "$$p"; done | \ ++ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ ++ -e 's/$$/$(EXEEXT)/' `; \ ++ test -n "$$list" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(libexecdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(libexecdir)" && rm -f $$files + + clean-libexecPROGRAMS: +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- echo " rm -f $$p $$f"; \ +- rm -f $$p $$f ; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$$list" || exit 0; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list || exit $$?; \ ++ test -n "$(EXEEXT)" || exit 0; \ ++ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list + accessx-status-applet$(EXEEXT): $(accessx_status_applet_OBJECTS) $(accessx_status_applet_DEPENDENCIES) + @rm -f accessx-status-applet$(EXEEXT) + $(LINK) $(accessx_status_applet_OBJECTS) $(accessx_status_applet_LDADD) $(LIBS) +@@ -422,21 +483,21 @@ + + .c.o: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c $< + + .c.obj: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: + @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< +@@ -449,37 +510,43 @@ + install-serverDATA: $(server_DATA) + @$(NORMAL_INSTALL) + test -z "$(serverdir)" || $(MKDIR_P) "$(DESTDIR)$(serverdir)" +- @list='$(server_DATA)'; for p in $$list; do \ ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(serverDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(serverdir)/$$f'"; \ +- $(serverDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(serverdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(serverdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(serverdir)" || exit $$?; \ + done + + uninstall-serverDATA: + @$(NORMAL_UNINSTALL) +- @list='$(server_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(serverdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(serverdir)/$$f"; \ +- done ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(serverdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(serverdir)" && rm -f $$files + install-uiDATA: $(ui_DATA) + @$(NORMAL_INSTALL) + test -z "$(uidir)" || $(MKDIR_P) "$(DESTDIR)$(uidir)" +- @list='$(ui_DATA)'; for p in $$list; do \ ++ @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(uiDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(uidir)/$$f'"; \ +- $(uiDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(uidir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(uidir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(uidir)" || exit $$?; \ + done + + uninstall-uiDATA: + @$(NORMAL_UNINSTALL) +- @list='$(ui_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(uidir)/$$f'"; \ +- rm -f "$(DESTDIR)$(uidir)/$$f"; \ +- done ++ @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(uidir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(uidir)" && rm -f $$files + + # This directory's subdirectories are mostly independent; you can cd + # into them and run `make' without going through this Makefile. +@@ -505,7 +572,7 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ +@@ -539,16 +606,16 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" + tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) +@@ -563,7 +630,7 @@ + + TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ ++ set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ +@@ -575,7 +642,7 @@ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ +- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ ++ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ +@@ -584,29 +651,34 @@ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ shift; \ ++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique; \ ++ if test $$# -gt 0; then \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ "$$@" $$unique; \ ++ else \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$unique; \ ++ fi; \ + fi + ctags: CTAGS + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$tags $$unique ++ $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && cd $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) $$here ++ && $(am__cd) $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) "$$here" + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +@@ -627,29 +699,44 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ +- distdir=`$(am__cd) $(distdir) && pwd`; \ +- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ +- (cd $$subdir && \ ++ fi; \ ++ done ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ if test "$$subdir" = .; then :; else \ ++ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ ++ $(am__relativize); \ ++ new_distdir=$$reldir; \ ++ dir1=$$subdir; dir2="$(top_distdir)"; \ ++ $(am__relativize); \ ++ new_top_distdir=$$reldir; \ ++ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ ++ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ++ ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ +- top_distdir="$$top_distdir" \ +- distdir="$$distdir/$$subdir" \ ++ top_distdir="$$new_top_distdir" \ ++ distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ ++ am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ +@@ -683,6 +770,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -704,6 +792,8 @@ + + html: html-recursive + ++html-am: ++ + info: info-recursive + + info-am: +@@ -712,18 +802,28 @@ + + install-dvi: install-dvi-recursive + ++install-dvi-am: ++ + install-exec-am: install-libexecPROGRAMS + + install-html: install-html-recursive + ++install-html-am: ++ + install-info: install-info-recursive + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-recursive + ++install-pdf-am: ++ + install-ps: install-ps-recursive + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -747,8 +847,8 @@ + uninstall-am: uninstall-libexecPROGRAMS uninstall-serverDATA \ + uninstall-uiDATA + +-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ +- install-strip ++.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ ++ install-am install-strip tags-recursive + + .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic \ +@@ -775,6 +875,7 @@ + @INTLTOOL_SERVER_RULE@ + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/accessx-status/pixmaps/Makefile.in gnome-applets-2.28.0.ubuntu/accessx-status/pixmaps/Makefile.in +--- gnome-applets-2.28.0/accessx-status/pixmaps/Makefile.in 2009-09-21 08:19:31.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/accessx-status/pixmaps/Makefile.in 2009-09-21 12:06:42.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -15,8 +16,9 @@ + @SET_MAKE@ + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -46,6 +48,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +@@ -53,11 +56,24 @@ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' + am__installdirs = "$(DESTDIR)$(accessx_status_iconsdir)" \ + "$(DESTDIR)$(accessx_status_pixmapsdir)" +-accessx_status_iconsDATA_INSTALL = $(INSTALL_DATA) +-accessx_status_pixmapsDATA_INSTALL = $(INSTALL_DATA) + DATA = $(accessx_status_icons_DATA) $(accessx_status_pixmaps_DATA) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + pkgdatadir = @pkgdatadir@ +@@ -188,6 +204,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -345,9 +362,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu accessx-status/pixmaps/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu accessx-status/pixmaps/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu accessx-status/pixmaps/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu accessx-status/pixmaps/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -365,6 +382,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + mostlyclean-libtool: + -rm -f *.lo +@@ -374,37 +392,43 @@ + install-accessx_status_iconsDATA: $(accessx_status_icons_DATA) + @$(NORMAL_INSTALL) + test -z "$(accessx_status_iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(accessx_status_iconsdir)" +- @list='$(accessx_status_icons_DATA)'; for p in $$list; do \ ++ @list='$(accessx_status_icons_DATA)'; test -n "$(accessx_status_iconsdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(accessx_status_iconsDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(accessx_status_iconsdir)/$$f'"; \ +- $(accessx_status_iconsDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(accessx_status_iconsdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(accessx_status_iconsdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(accessx_status_iconsdir)" || exit $$?; \ + done + + uninstall-accessx_status_iconsDATA: + @$(NORMAL_UNINSTALL) +- @list='$(accessx_status_icons_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(accessx_status_iconsdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(accessx_status_iconsdir)/$$f"; \ +- done ++ @list='$(accessx_status_icons_DATA)'; test -n "$(accessx_status_iconsdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(accessx_status_iconsdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(accessx_status_iconsdir)" && rm -f $$files + install-accessx_status_pixmapsDATA: $(accessx_status_pixmaps_DATA) + @$(NORMAL_INSTALL) + test -z "$(accessx_status_pixmapsdir)" || $(MKDIR_P) "$(DESTDIR)$(accessx_status_pixmapsdir)" +- @list='$(accessx_status_pixmaps_DATA)'; for p in $$list; do \ ++ @list='$(accessx_status_pixmaps_DATA)'; test -n "$(accessx_status_pixmapsdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(accessx_status_pixmapsDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(accessx_status_pixmapsdir)/$$f'"; \ +- $(accessx_status_pixmapsDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(accessx_status_pixmapsdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(accessx_status_pixmapsdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(accessx_status_pixmapsdir)" || exit $$?; \ + done + + uninstall-accessx_status_pixmapsDATA: + @$(NORMAL_UNINSTALL) +- @list='$(accessx_status_pixmaps_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(accessx_status_pixmapsdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(accessx_status_pixmapsdir)/$$f"; \ +- done ++ @list='$(accessx_status_pixmaps_DATA)'; test -n "$(accessx_status_pixmapsdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(accessx_status_pixmapsdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(accessx_status_pixmapsdir)" && rm -f $$files + tags: TAGS + TAGS: + +@@ -428,13 +452,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -465,6 +493,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -483,6 +512,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -491,21 +522,30 @@ + install-accessx_status_pixmapsDATA + @$(NORMAL_INSTALL) + $(MAKE) $(AM_MAKEFLAGS) install-data-hook +- + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -528,7 +568,6 @@ + uninstall-accessx_status_pixmapsDATA + @$(NORMAL_INSTALL) + $(MAKE) $(AM_MAKEFLAGS) uninstall-hook +- + .MAKE: install-am install-data-am install-strip uninstall-am + + .PHONY: all all-am check check-am clean clean-generic clean-libtool \ +@@ -559,6 +598,7 @@ + fi + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/aclocal.m4 gnome-applets-2.28.0.ubuntu/aclocal.m4 +--- gnome-applets-2.28.0/aclocal.m4 2009-09-21 08:19:28.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/aclocal.m4 2009-09-21 12:06:35.000000000 +0200 +@@ -1,7 +1,7 @@ +-# generated automatically by aclocal 1.10.2 -*- Autoconf -*- ++# generated automatically by aclocal 1.11 -*- Autoconf -*- + + # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +-# 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -13,8 +13,8 @@ + + m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.63],, +-[m4_warning([this file was generated for autoconf 2.63. ++m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.64],, ++[m4_warning([this file was generated for autoconf 2.64. + You have another version of autoconf. It may work, but is not guaranteed to. + If you have problems, you may need to regenerate the build system entirely. + To do so, use the procedure documented by the package, typically `autoreconf'.])]) +@@ -55,10 +55,11 @@ + AC_MSG_RESULT([Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files]) + + AC_ARG_ENABLE(schemas-install, +- [ --disable-schemas-install Disable the schemas installation], ++ AC_HELP_STRING([--disable-schemas-install], ++ [Disable the schemas installation]), + [case ${enableval} in + yes|no) ;; +- *) AC_MSG_ERROR(bad value ${enableval} for --enable-schemas-install) ;; ++ *) AC_MSG_ERROR([bad value ${enableval} for --enable-schemas-install]) ;; + esac]) + AM_CONDITIONAL([GCONF_SCHEMAS_INSTALL], [test "$enable_schemas_install" != no]) + ]) +@@ -840,10 +841,10 @@ + # generated from the m4 files accompanying Automake X.Y. + # (This private macro should not be called outside this file.) + AC_DEFUN([AM_AUTOMAKE_VERSION], +-[am__api_version='1.10' ++[am__api_version='1.11' + dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to + dnl require some minimum version. Point them to the right macro. +-m4_if([$1], [1.10.2], [], ++m4_if([$1], [1.11], [], + [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl + ]) + +@@ -859,7 +860,7 @@ + # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. + # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. + AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +-[AM_AUTOMAKE_VERSION([1.10.2])dnl ++[AM_AUTOMAKE_VERSION([1.11])dnl + m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl + _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) +@@ -919,14 +920,14 @@ + + # AM_CONDITIONAL -*- Autoconf -*- + +-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006 ++# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008 + # Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + +-# serial 8 ++# serial 9 + + # AM_CONDITIONAL(NAME, SHELL-CONDITION) + # ------------------------------------- +@@ -939,6 +940,7 @@ + AC_SUBST([$1_FALSE])dnl + _AM_SUBST_NOTMAKE([$1_TRUE])dnl + _AM_SUBST_NOTMAKE([$1_FALSE])dnl ++m4_define([_AM_COND_VALUE_$1], [$2])dnl + if $2; then + $1_TRUE= + $1_FALSE='#' +@@ -952,14 +954,14 @@ + Usually this means the macro was only invoked conditionally.]]) + fi])]) + +-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 ++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009 + # Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + +-# serial 9 ++# serial 10 + + # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be + # written in clear, in which case automake, when reading aclocal.m4, +@@ -1016,6 +1018,16 @@ + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi ++ am__universal=false ++ m4_case([$1], [CC], ++ [case " $depcc " in #( ++ *\ -arch\ *\ -arch\ *) am__universal=true ;; ++ esac], ++ [CXX], ++ [case " $depcc " in #( ++ *\ -arch\ *\ -arch\ *) am__universal=true ;; ++ esac]) ++ + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and +@@ -1033,7 +1045,17 @@ + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + ++ # We check with `-c' and `-o' for the sake of the "dashmstdout" ++ # mode. It turns out that the SunPro C++ compiler does not properly ++ # handle `-M -o', and we need to detect this. Also, some Intel ++ # versions had trouble with output in subdirs ++ am__obj=sub/conftest.${OBJEXT-o} ++ am__minus_obj="-o $am__obj" + case $depmode in ++ gcc) ++ # This depmode causes a compiler race in universal mode. ++ test "$am__universal" = false || continue ++ ;; + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested +@@ -1043,19 +1065,23 @@ + break + fi + ;; ++ msvisualcpp | msvcmsys) ++ # This compiler won't grok `-c -o', but also, the minuso test has ++ # not run yet. These depmodes are late enough in the game, and ++ # so weak that their functioning should not be impacted. ++ am__obj=conftest.${OBJEXT-o} ++ am__minus_obj= ++ ;; + none) break ;; + esac +- # We check with `-c' and `-o' for the sake of the "dashmstdout" +- # mode. It turns out that the SunPro C++ compiler does not properly +- # handle `-M -o', and we need to detect this. + if depmode=$depmode \ +- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ ++ source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ +- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ ++ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && +- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ++ grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message +@@ -1205,13 +1231,13 @@ + # Do all the work for Automake. -*- Autoconf -*- + + # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +-# 2005, 2006, 2008 Free Software Foundation, Inc. ++# 2005, 2006, 2008, 2009 Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + +-# serial 13 ++# serial 16 + + # This macro actually does too much. Some checks are only needed if + # your package does certain things. But this isn't really a big deal. +@@ -1228,7 +1254,7 @@ + # arguments mandatory, and then we can depend on a new Autoconf + # release and drop the old call support. + AC_DEFUN([AM_INIT_AUTOMAKE], +-[AC_PREREQ([2.60])dnl ++[AC_PREREQ([2.62])dnl + dnl Autoconf wants to disallow AM_ names. We explicitly allow + dnl the ones we care about. + m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +@@ -1279,8 +1305,8 @@ + AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) + AM_MISSING_PROG(AUTOHEADER, autoheader) + AM_MISSING_PROG(MAKEINFO, makeinfo) +-AM_PROG_INSTALL_SH +-AM_PROG_INSTALL_STRIP ++AC_REQUIRE([AM_PROG_INSTALL_SH])dnl ++AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl + AC_REQUIRE([AM_PROG_MKDIR_P])dnl + # We need awk for the "check" target. The system "awk" is bad on + # some platforms. +@@ -1288,24 +1314,37 @@ + AC_REQUIRE([AC_PROG_MAKE_SET])dnl + AC_REQUIRE([AM_SET_LEADING_DOT])dnl + _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], +- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], +- [_AM_PROG_TAR([v7])])]) ++ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], ++ [_AM_PROG_TAR([v7])])]) + _AM_IF_OPTION([no-dependencies],, + [AC_PROVIDE_IFELSE([AC_PROG_CC], +- [_AM_DEPENDENCIES(CC)], +- [define([AC_PROG_CC], +- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl ++ [_AM_DEPENDENCIES(CC)], ++ [define([AC_PROG_CC], ++ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl + AC_PROVIDE_IFELSE([AC_PROG_CXX], +- [_AM_DEPENDENCIES(CXX)], +- [define([AC_PROG_CXX], +- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl ++ [_AM_DEPENDENCIES(CXX)], ++ [define([AC_PROG_CXX], ++ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl + AC_PROVIDE_IFELSE([AC_PROG_OBJC], +- [_AM_DEPENDENCIES(OBJC)], +- [define([AC_PROG_OBJC], +- defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl ++ [_AM_DEPENDENCIES(OBJC)], ++ [define([AC_PROG_OBJC], ++ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl + ]) ++_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl ++dnl The `parallel-tests' driver may need to know about EXEEXT, so add the ++dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro ++dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. ++AC_CONFIG_COMMANDS_PRE(dnl ++[m4_provide_if([_AM_COMPILER_EXEEXT], ++ [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl + ]) + ++dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not ++dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further ++dnl mangled by Autoconf and run in a shell conditional statement. ++m4_define([_AC_COMPILER_EXEEXT], ++m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) ++ + + # When config.status generates a header, we must update the stamp-h file. + # This file resides in the same directory as the config header +@@ -1328,7 +1367,7 @@ + done + echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) + +-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. ++# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, +@@ -1339,7 +1378,14 @@ + # Define $install_sh. + AC_DEFUN([AM_PROG_INSTALL_SH], + [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +-install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} ++if test x"${install_sh}" != xset; then ++ case $am_aux_dir in ++ *\ * | *\ *) ++ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; ++ *) ++ install_sh="\${SHELL} $am_aux_dir/install-sh" ++ esac ++fi + AC_SUBST(install_sh)]) + + # Copyright (C) 2003, 2005 Free Software Foundation, Inc. +@@ -1366,27 +1412,38 @@ + # Add --enable-maintainer-mode option to configure. -*- Autoconf -*- + # From Jim Meyering + +-# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005 ++# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008 + # Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + +-# serial 4 ++# serial 5 + ++# AM_MAINTAINER_MODE([DEFAULT-MODE]) ++# ---------------------------------- ++# Control maintainer-specific portions of Makefiles. ++# Default is to disable them, unless `enable' is passed literally. ++# For symmetry, `disable' may be passed as well. Anyway, the user ++# can override the default with the --enable/--disable switch. + AC_DEFUN([AM_MAINTAINER_MODE], +-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) +- dnl maintainer-mode is disabled by default +- AC_ARG_ENABLE(maintainer-mode, +-[ --enable-maintainer-mode enable make rules and dependencies not useful ++[m4_case(m4_default([$1], [disable]), ++ [enable], [m4_define([am_maintainer_other], [disable])], ++ [disable], [m4_define([am_maintainer_other], [enable])], ++ [m4_define([am_maintainer_other], [enable]) ++ m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) ++AC_MSG_CHECKING([whether to am_maintainer_other maintainer-specific portions of Makefiles]) ++ dnl maintainer-mode's default is 'disable' unless 'enable' is passed ++ AC_ARG_ENABLE([maintainer-mode], ++[ --][am_maintainer_other][-maintainer-mode am_maintainer_other make rules and dependencies not useful + (and sometimes confusing) to the casual installer], +- USE_MAINTAINER_MODE=$enableval, +- USE_MAINTAINER_MODE=no) ++ [USE_MAINTAINER_MODE=$enableval], ++ [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) + AC_MSG_RESULT([$USE_MAINTAINER_MODE]) +- AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes]) ++ AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) + MAINT=$MAINTAINER_MODE_TRUE +- AC_SUBST(MAINT)dnl ++ AC_SUBST([MAINT])dnl + ] + ) + +@@ -1394,13 +1451,13 @@ + + # Check to see how 'make' treats includes. -*- Autoconf -*- + +-# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. ++# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + +-# serial 3 ++# serial 4 + + # AM_MAKE_INCLUDE() + # ----------------- +@@ -1409,7 +1466,7 @@ + [am_make=${MAKE-make} + cat > confinc << 'END' + am__doit: +- @echo done ++ @echo this is the am__doit target + .PHONY: am__doit + END + # If we don't find an include directive, just comment out the code. +@@ -1419,24 +1476,24 @@ + _am_result=none + # First try GNU make style include. + echo "include confinc" > confmf +-# We grep out `Entering directory' and `Leaving directory' +-# messages which can occur if `w' ends up in MAKEFLAGS. +-# In particular we don't look at `^make:' because GNU make might +-# be invoked under some other name (usually "gmake"), in which +-# case it prints its new name instead of `make'. +-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then +- am__include=include +- am__quote= +- _am_result=GNU +-fi ++# Ignore all kinds of additional output from `make'. ++case `$am_make -s -f confmf 2> /dev/null` in #( ++*the\ am__doit\ target*) ++ am__include=include ++ am__quote= ++ _am_result=GNU ++ ;; ++esac + # Now try BSD make style include. + if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf +- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then +- am__include=.include +- am__quote="\"" +- _am_result=BSD +- fi ++ case `$am_make -s -f confmf 2> /dev/null` in #( ++ *the\ am__doit\ target*) ++ am__include=.include ++ am__quote="\"" ++ _am_result=BSD ++ ;; ++ esac + fi + AC_SUBST([am__include]) + AC_SUBST([am__quote]) +@@ -1446,14 +1503,14 @@ + + # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005 ++# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008 + # Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + +-# serial 5 ++# serial 6 + + # AM_MISSING_PROG(NAME, PROGRAM) + # ------------------------------ +@@ -1470,7 +1527,14 @@ + AC_DEFUN([AM_MISSING_HAS_RUN], + [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl + AC_REQUIRE_AUX_FILE([missing])dnl +-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" ++if test x"${MISSING+set}" != xset; then ++ case $am_aux_dir in ++ *\ * | *\ *) ++ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; ++ *) ++ MISSING="\${SHELL} $am_aux_dir/missing" ;; ++ esac ++fi + # Use eval to expand $SHELL + if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +@@ -1539,7 +1603,7 @@ + AC_DEFUN([_AM_IF_OPTION], + [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 ++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008, 2009 + # Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation +@@ -1570,13 +1634,11 @@ + # numbers and dots only. + AC_DEFUN([AM_PATH_PYTHON], + [ +- dnl Find a Python interpreter. Python versions prior to 1.5 are not +- dnl supported because the default installation locations changed from +- dnl $prefix/lib/site-python in 1.4 to $prefix/lib/python1.5/site-packages +- dnl in 1.5. ++ dnl Find a Python interpreter. Python versions prior to 2.0 are not ++ dnl supported. (2.0 was released on October 16, 2000). + m4_define_default([_AM_PYTHON_INTERPRETER_LIST], +- [python python2 python2.5 python2.4 python2.3 python2.2 dnl +-python2.1 python2.0 python1.6 python1.5]) ++ [python python2 python3 python3.0 python2.5 python2.4 python2.3 python2.2 dnl ++python2.1 python2.0]) + + m4_if([$1],[],[ + dnl No version check is needed. +@@ -1623,7 +1685,7 @@ + dnl library. + + AC_CACHE_CHECK([for $am_display_PYTHON version], [am_cv_python_version], +- [am_cv_python_version=`$PYTHON -c "import sys; print sys.version[[:3]]"`]) ++ [am_cv_python_version=`$PYTHON -c "import sys; sys.stdout.write(sys.version[[:3]])"`]) + AC_SUBST([PYTHON_VERSION], [$am_cv_python_version]) + + dnl Use the values of $prefix and $exec_prefix for the corresponding +@@ -1638,7 +1700,7 @@ + dnl to know which OS platform Python thinks this is. + + AC_CACHE_CHECK([for $am_display_PYTHON platform], [am_cv_python_platform], +- [am_cv_python_platform=`$PYTHON -c "import sys; print sys.platform"`]) ++ [am_cv_python_platform=`$PYTHON -c "import sys; sys.stdout.write(sys.platform)"`]) + AC_SUBST([PYTHON_PLATFORM], [$am_cv_python_platform]) + + +@@ -1717,15 +1779,16 @@ + # Run ACTION-IF-FALSE otherwise. + # This test uses sys.hexversion instead of the string equivalent (first + # word of sys.version), in order to cope with versions such as 2.2c1. +-# hexversion has been introduced in Python 1.5.2; it's probably not +-# worth to support older versions (1.5.1 was released on October 31, 1998). ++# This supports Python 2.0 or higher. (2.0 was released on October 16, 2000). + AC_DEFUN([AM_PYTHON_CHECK_VERSION], +- [prog="import sys, string ++ [prog="import sys + # split strings by '.' and convert to numeric. Append some zeros + # because we need at least 4 digits for the hex conversion. +-minver = map(int, string.split('$2', '.')) + [[0, 0, 0]] ++# map returns an iterator in Python 3.0 and a list in 2.x ++minver = list(map(int, '$2'.split('.'))) + [[0, 0, 0]] + minverhex = 0 +-for i in xrange(0, 4): minverhex = (minverhex << 8) + minver[[i]] ++# xrange is not present in Python 3.0 and range returns an iterator ++for i in list(range(0, 4)): minverhex = (minverhex << 8) + minver[[i]] + sys.exit(sys.hexversion < minverhex)" + AS_IF([AM_RUN_LOG([$1 -c "$prog"])], [$3], [$4])]) + +@@ -1748,14 +1811,14 @@ + + # Check to make sure that the build environment is sane. -*- Autoconf -*- + +-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 ++# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008 + # Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + +-# serial 4 ++# serial 5 + + # AM_SANITY_CHECK + # --------------- +@@ -1764,16 +1827,29 @@ + # Just in case + sleep 1 + echo timestamp > conftest.file ++# Reject unsafe characters in $srcdir or the absolute working directory ++# name. Accept space and tab only in the latter. ++am_lf=' ++' ++case `pwd` in ++ *[[\\\"\#\$\&\'\`$am_lf]]*) ++ AC_MSG_ERROR([unsafe absolute working directory name]);; ++esac ++case $srcdir in ++ *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) ++ AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; ++esac ++ + # Do `set' in a subshell so we don't clobber the current shell's + # arguments. Must try -L first in case configure is actually a + # symlink; some systems play weird games with the mod time of symlinks + # (eg FreeBSD returns the mod time of the symlink's containing + # directory). + if ( +- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` ++ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. +- set X `ls -t $srcdir/configure conftest.file` ++ set X `ls -t "$srcdir/configure" conftest.file` + fi + rm -f conftest.file + if test "$[*]" != "X $srcdir/configure conftest.file" \ +@@ -1826,18 +1902,25 @@ + INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +-# Copyright (C) 2006 Free Software Foundation, Inc. ++# Copyright (C) 2006, 2008 Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + ++# serial 2 ++ + # _AM_SUBST_NOTMAKE(VARIABLE) + # --------------------------- + # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. + # This macro is traced by Automake. + AC_DEFUN([_AM_SUBST_NOTMAKE]) + ++# AM_SUBST_NOTMAKE(VARIABLE) ++# --------------------------- ++# Public sister of _AM_SUBST_NOTMAKE. ++AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) ++ + # Check how to create a tarball. -*- Autoconf -*- + + # Copyright (C) 2004, 2005 Free Software Foundation, Inc. +diff -Nur gnome-applets-2.28.0/battstat/apmlib/Makefile.in gnome-applets-2.28.0.ubuntu/battstat/apmlib/Makefile.in +--- gnome-applets-2.28.0/battstat/apmlib/Makefile.in 2009-09-21 08:19:31.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/battstat/apmlib/Makefile.in 2009-09-21 12:06:42.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -21,8 +22,9 @@ + # + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -52,6 +54,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + LIBRARIES = $(noinst_LIBRARIES) + ARFLAGS = cru + libapm_a_AR = $(AR) $(ARFLAGS) +@@ -61,6 +64,7 @@ + DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles ++am__mv = mv -f + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) + LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +@@ -203,6 +207,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -324,9 +329,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu battstat/apmlib/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu battstat/apmlib/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu battstat/apmlib/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu battstat/apmlib/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -344,6 +349,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + clean-noinstLIBRARIES: + -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES) +@@ -362,21 +368,21 @@ + + .c.o: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c $< + + .c.obj: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: + @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< +@@ -399,7 +405,7 @@ + + TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ ++ set x; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ +@@ -407,29 +413,34 @@ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ shift; \ ++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique; \ ++ if test $$# -gt 0; then \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ "$$@" $$unique; \ ++ else \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$unique; \ ++ fi; \ + fi + ctags: CTAGS + CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$tags $$unique ++ $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && cd $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) $$here ++ && $(am__cd) $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) "$$here" + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +@@ -450,13 +461,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -484,6 +499,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -505,6 +521,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -513,18 +531,28 @@ + + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -564,6 +592,7 @@ + + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/battstat/docs/Makefile.in gnome-applets-2.28.0.ubuntu/battstat/docs/Makefile.in +--- gnome-applets-2.28.0/battstat/docs/Makefile.in 2009-09-21 08:19:31.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/battstat/docs/Makefile.in 2009-09-21 12:06:42.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -38,8 +39,9 @@ + + ################################################################################ + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -70,6 +72,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +@@ -201,6 +204,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -423,9 +427,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu battstat/docs/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu battstat/docs/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu battstat/docs/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu battstat/docs/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -443,6 +447,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + mostlyclean-libtool: + -rm -f *.lo +@@ -472,13 +477,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -509,6 +518,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -527,6 +537,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -535,18 +547,28 @@ + + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -957,6 +979,7 @@ + dist-hook: doc-dist-hook + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/battstat/Makefile.in gnome-applets-2.28.0.ubuntu/battstat/Makefile.in +--- gnome-applets-2.28.0/battstat/Makefile.in 2009-09-21 08:19:31.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/battstat/Makefile.in 2009-09-21 12:06:42.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -16,8 +17,9 @@ + + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -48,10 +50,10 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + am__installdirs = "$(DESTDIR)$(libexecdir)" "$(DESTDIR)$(builderdir)" \ + "$(DESTDIR)$(schemasdir)" "$(DESTDIR)$(serverdir)" \ + "$(DESTDIR)$(uidir)" +-libexecPROGRAMS_INSTALL = $(INSTALL_PROGRAM) + PROGRAMS = $(libexec_PROGRAMS) + am_battstat_applet_2_OBJECTS = properties.$(OBJEXT) \ + battstat_applet.$(OBJEXT) power-management.$(OBJEXT) \ +@@ -67,6 +69,7 @@ + DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles ++am__mv = mv -f + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) + LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +@@ -90,17 +93,56 @@ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +-builderDATA_INSTALL = $(INSTALL_DATA) +-schemasDATA_INSTALL = $(INSTALL_DATA) +-serverDATA_INSTALL = $(INSTALL_DATA) +-uiDATA_INSTALL = $(INSTALL_DATA) ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' + DATA = $(builder_DATA) $(schemas_DATA) $(server_DATA) $(ui_DATA) + RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive ++AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ ++ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ ++ distdir + ETAGS = etags + CTAGS = ctags + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++am__relativize = \ ++ dir0=`pwd`; \ ++ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ ++ sed_rest='s,^[^/]*/*,,'; \ ++ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ ++ sed_butlast='s,/*[^/]*$$,,'; \ ++ while test -n "$$dir1"; do \ ++ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ ++ if test "$$first" != "."; then \ ++ if test "$$first" = ".."; then \ ++ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ ++ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ ++ else \ ++ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ ++ if test "$$first2" = "$$first"; then \ ++ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ ++ else \ ++ dir2="../$$dir2"; \ ++ fi; \ ++ dir0="$$dir0"/"$$first"; \ ++ fi; \ ++ fi; \ ++ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ ++ done; \ ++ reldir="$$dir2" + pkgdatadir = @pkgdatadir@ + ACLOCAL = @ACLOCAL@ + ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@ +@@ -229,6 +271,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -398,9 +441,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu battstat/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu battstat/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu battstat/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu battstat/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -418,34 +461,50 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + install-libexecPROGRAMS: $(libexec_PROGRAMS) + @$(NORMAL_INSTALL) + test -z "$(libexecdir)" || $(MKDIR_P) "$(DESTDIR)$(libexecdir)" +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- if test -f $$p \ +- || test -f $$p1 \ +- ; then \ +- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(libexecdir)/$$f'"; \ +- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(libexecdir)/$$f" || exit 1; \ +- else :; fi; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed 's/$(EXEEXT)$$//' | \ ++ while read p p1; do if test -f $$p || test -f $$p1; \ ++ then echo "$$p"; echo "$$p"; else :; fi; \ ++ done | \ ++ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ ++ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ ++ sed 'N;N;N;s,\n, ,g' | \ ++ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ ++ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ ++ if ($$2 == $$4) files[d] = files[d] " " $$1; \ ++ else { print "f", $$3 "/" $$4, $$1; } } \ ++ END { for (d in files) print "f", d, files[d] }' | \ ++ while read type dir files; do \ ++ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ ++ test -z "$$files" || { \ ++ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(libexecdir)$$dir'"; \ ++ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(libexecdir)$$dir" || exit $$?; \ ++ } \ ++ ; done + + uninstall-libexecPROGRAMS: + @$(NORMAL_UNINSTALL) +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " rm -f '$(DESTDIR)$(libexecdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(libexecdir)/$$f"; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ ++ files=`for p in $$list; do echo "$$p"; done | \ ++ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ ++ -e 's/$$/$(EXEEXT)/' `; \ ++ test -n "$$list" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(libexecdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(libexecdir)" && rm -f $$files + + clean-libexecPROGRAMS: +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- echo " rm -f $$p $$f"; \ +- rm -f $$p $$f ; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$$list" || exit 0; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list || exit $$?; \ ++ test -n "$(EXEEXT)" || exit 0; \ ++ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list + battstat-applet-2$(EXEEXT): $(battstat_applet_2_OBJECTS) $(battstat_applet_2_DEPENDENCIES) + @rm -f battstat-applet-2$(EXEEXT) + $(LINK) $(battstat_applet_2_OBJECTS) $(battstat_applet_2_LDADD) $(LIBS) +@@ -465,21 +524,21 @@ + + .c.o: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c $< + + .c.obj: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: + @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< +@@ -492,71 +551,83 @@ + install-builderDATA: $(builder_DATA) + @$(NORMAL_INSTALL) + test -z "$(builderdir)" || $(MKDIR_P) "$(DESTDIR)$(builderdir)" +- @list='$(builder_DATA)'; for p in $$list; do \ ++ @list='$(builder_DATA)'; test -n "$(builderdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(builderDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(builderdir)/$$f'"; \ +- $(builderDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(builderdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(builderdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(builderdir)" || exit $$?; \ + done + + uninstall-builderDATA: + @$(NORMAL_UNINSTALL) +- @list='$(builder_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(builderdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(builderdir)/$$f"; \ +- done ++ @list='$(builder_DATA)'; test -n "$(builderdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(builderdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(builderdir)" && rm -f $$files + install-schemasDATA: $(schemas_DATA) + @$(NORMAL_INSTALL) + test -z "$(schemasdir)" || $(MKDIR_P) "$(DESTDIR)$(schemasdir)" +- @list='$(schemas_DATA)'; for p in $$list; do \ ++ @list='$(schemas_DATA)'; test -n "$(schemasdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(schemasDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(schemasdir)/$$f'"; \ +- $(schemasDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(schemasdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(schemasdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(schemasdir)" || exit $$?; \ + done + + uninstall-schemasDATA: + @$(NORMAL_UNINSTALL) +- @list='$(schemas_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(schemasdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(schemasdir)/$$f"; \ +- done ++ @list='$(schemas_DATA)'; test -n "$(schemasdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(schemasdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(schemasdir)" && rm -f $$files + install-serverDATA: $(server_DATA) + @$(NORMAL_INSTALL) + test -z "$(serverdir)" || $(MKDIR_P) "$(DESTDIR)$(serverdir)" +- @list='$(server_DATA)'; for p in $$list; do \ ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(serverDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(serverdir)/$$f'"; \ +- $(serverDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(serverdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(serverdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(serverdir)" || exit $$?; \ + done + + uninstall-serverDATA: + @$(NORMAL_UNINSTALL) +- @list='$(server_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(serverdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(serverdir)/$$f"; \ +- done ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(serverdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(serverdir)" && rm -f $$files + install-uiDATA: $(ui_DATA) + @$(NORMAL_INSTALL) + test -z "$(uidir)" || $(MKDIR_P) "$(DESTDIR)$(uidir)" +- @list='$(ui_DATA)'; for p in $$list; do \ ++ @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(uiDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(uidir)/$$f'"; \ +- $(uiDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(uidir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(uidir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(uidir)" || exit $$?; \ + done + + uninstall-uiDATA: + @$(NORMAL_UNINSTALL) +- @list='$(ui_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(uidir)/$$f'"; \ +- rm -f "$(DESTDIR)$(uidir)/$$f"; \ +- done ++ @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(uidir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(uidir)" && rm -f $$files + + # This directory's subdirectories are mostly independent; you can cd + # into them and run `make' without going through this Makefile. +@@ -582,7 +653,7 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ +@@ -616,16 +687,16 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" + tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) +@@ -640,7 +711,7 @@ + + TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ ++ set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ +@@ -652,7 +723,7 @@ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ +- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ ++ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ +@@ -661,29 +732,34 @@ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ shift; \ ++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique; \ ++ if test $$# -gt 0; then \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ "$$@" $$unique; \ ++ else \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$unique; \ ++ fi; \ + fi + ctags: CTAGS + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$tags $$unique ++ $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && cd $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) $$here ++ && $(am__cd) $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) "$$here" + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +@@ -704,29 +780,44 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ +- distdir=`$(am__cd) $(distdir) && pwd`; \ +- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ +- (cd $$subdir && \ ++ fi; \ ++ done ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ if test "$$subdir" = .; then :; else \ ++ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ ++ $(am__relativize); \ ++ new_distdir=$$reldir; \ ++ dir1=$$subdir; dir2="$(top_distdir)"; \ ++ $(am__relativize); \ ++ new_top_distdir=$$reldir; \ ++ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ ++ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ++ ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ +- top_distdir="$$top_distdir" \ +- distdir="$$distdir/$$subdir" \ ++ top_distdir="$$new_top_distdir" \ ++ distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ ++ am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ +@@ -760,6 +851,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -782,6 +874,8 @@ + + html: html-recursive + ++html-am: ++ + info: info-recursive + + info-am: +@@ -791,18 +885,28 @@ + + install-dvi: install-dvi-recursive + ++install-dvi-am: ++ + install-exec-am: install-libexecPROGRAMS + + install-html: install-html-recursive + ++install-html-am: ++ + install-info: install-info-recursive + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-recursive + ++install-pdf-am: ++ + install-ps: install-ps-recursive + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -826,8 +930,8 @@ + uninstall-am: uninstall-builderDATA uninstall-libexecPROGRAMS \ + uninstall-schemasDATA uninstall-serverDATA uninstall-uiDATA + +-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ +- install-strip ++.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ ++ install-am install-strip tags-recursive + + .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic \ +@@ -860,6 +964,7 @@ + @INTLTOOL_SERVER_RULE@ + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/battstat/sounds/Makefile.in gnome-applets-2.28.0.ubuntu/battstat/sounds/Makefile.in +--- gnome-applets-2.28.0/battstat/sounds/Makefile.in 2009-09-21 08:19:31.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/battstat/sounds/Makefile.in 2009-09-21 12:06:42.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -15,8 +16,9 @@ + @SET_MAKE@ + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -46,6 +48,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +@@ -53,9 +56,23 @@ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' + am__installdirs = "$(DESTDIR)$(soundlistdir)" +-soundlistDATA_INSTALL = $(INSTALL_DATA) + DATA = $(soundlist_DATA) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + pkgdatadir = @pkgdatadir@ +@@ -186,6 +203,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -303,9 +321,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu battstat/sounds/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu battstat/sounds/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu battstat/sounds/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu battstat/sounds/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -323,6 +341,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + mostlyclean-libtool: + -rm -f *.lo +@@ -332,20 +351,23 @@ + install-soundlistDATA: $(soundlist_DATA) + @$(NORMAL_INSTALL) + test -z "$(soundlistdir)" || $(MKDIR_P) "$(DESTDIR)$(soundlistdir)" +- @list='$(soundlist_DATA)'; for p in $$list; do \ ++ @list='$(soundlist_DATA)'; test -n "$(soundlistdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(soundlistDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(soundlistdir)/$$f'"; \ +- $(soundlistDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(soundlistdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(soundlistdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(soundlistdir)" || exit $$?; \ + done + + uninstall-soundlistDATA: + @$(NORMAL_UNINSTALL) +- @list='$(soundlist_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(soundlistdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(soundlistdir)/$$f"; \ +- done ++ @list='$(soundlist_DATA)'; test -n "$(soundlistdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(soundlistdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(soundlistdir)" && rm -f $$files + tags: TAGS + TAGS: + +@@ -369,13 +391,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -407,6 +433,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -425,6 +452,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -433,18 +462,28 @@ + + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -483,6 +522,7 @@ + @INTLTOOL_SOUNDLIST_RULE@ + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/charpick/help/Makefile.in gnome-applets-2.28.0.ubuntu/charpick/help/Makefile.in +--- gnome-applets-2.28.0/charpick/help/Makefile.in 2009-09-21 08:19:32.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/charpick/help/Makefile.in 2009-09-21 12:06:42.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -38,8 +39,9 @@ + + ################################################################################ + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -70,6 +72,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +@@ -201,6 +204,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -422,9 +426,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu charpick/help/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu charpick/help/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu charpick/help/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu charpick/help/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -442,6 +446,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + mostlyclean-libtool: + -rm -f *.lo +@@ -471,13 +476,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -508,6 +517,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -526,6 +536,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -534,18 +546,28 @@ + + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -956,6 +978,7 @@ + dist-hook: doc-dist-hook + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/charpick/Makefile.in gnome-applets-2.28.0.ubuntu/charpick/Makefile.in +--- gnome-applets-2.28.0/charpick/Makefile.in 2009-09-21 08:19:31.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/charpick/Makefile.in 2009-09-21 12:06:42.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -16,8 +17,9 @@ + + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -48,9 +50,9 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + am__installdirs = "$(DESTDIR)$(libexecdir)" "$(DESTDIR)$(schemasdir)" \ + "$(DESTDIR)$(serverdir)" "$(DESTDIR)$(uidir)" +-libexecPROGRAMS_INSTALL = $(INSTALL_PROGRAM) + PROGRAMS = $(libexec_PROGRAMS) + am_charpick_applet2_OBJECTS = charpick.$(OBJEXT) properties.$(OBJEXT) + charpick_applet2_OBJECTS = $(am_charpick_applet2_OBJECTS) +@@ -60,6 +62,7 @@ + DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles ++am__mv = mv -f + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) + LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +@@ -83,17 +86,57 @@ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +-schemasDATA_INSTALL = $(INSTALL_DATA) +-serverDATA_INSTALL = $(INSTALL_DATA) +-uiDATA_INSTALL = $(INSTALL_DATA) ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' + DATA = $(schemas_DATA) $(server_DATA) $(ui_DATA) + RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive ++AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ ++ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ ++ distdir + ETAGS = etags + CTAGS = ctags + DIST_SUBDIRS = $(SUBDIRS) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++am__relativize = \ ++ dir0=`pwd`; \ ++ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ ++ sed_rest='s,^[^/]*/*,,'; \ ++ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ ++ sed_butlast='s,/*[^/]*$$,,'; \ ++ while test -n "$$dir1"; do \ ++ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ ++ if test "$$first" != "."; then \ ++ if test "$$first" = ".."; then \ ++ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ ++ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ ++ else \ ++ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ ++ if test "$$first2" = "$$first"; then \ ++ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ ++ else \ ++ dir2="../$$dir2"; \ ++ fi; \ ++ dir0="$$dir0"/"$$first"; \ ++ fi; \ ++ fi; \ ++ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ ++ done; \ ++ reldir="$$dir2" + pkgdatadir = @pkgdatadir@ + ACLOCAL = @ACLOCAL@ + ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@ +@@ -222,6 +265,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -366,9 +410,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu charpick/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu charpick/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu charpick/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu charpick/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -386,34 +430,50 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + install-libexecPROGRAMS: $(libexec_PROGRAMS) + @$(NORMAL_INSTALL) + test -z "$(libexecdir)" || $(MKDIR_P) "$(DESTDIR)$(libexecdir)" +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- if test -f $$p \ +- || test -f $$p1 \ +- ; then \ +- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(libexecdir)/$$f'"; \ +- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(libexecdir)/$$f" || exit 1; \ +- else :; fi; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed 's/$(EXEEXT)$$//' | \ ++ while read p p1; do if test -f $$p || test -f $$p1; \ ++ then echo "$$p"; echo "$$p"; else :; fi; \ ++ done | \ ++ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ ++ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ ++ sed 'N;N;N;s,\n, ,g' | \ ++ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ ++ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ ++ if ($$2 == $$4) files[d] = files[d] " " $$1; \ ++ else { print "f", $$3 "/" $$4, $$1; } } \ ++ END { for (d in files) print "f", d, files[d] }' | \ ++ while read type dir files; do \ ++ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ ++ test -z "$$files" || { \ ++ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(libexecdir)$$dir'"; \ ++ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(libexecdir)$$dir" || exit $$?; \ ++ } \ ++ ; done + + uninstall-libexecPROGRAMS: + @$(NORMAL_UNINSTALL) +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " rm -f '$(DESTDIR)$(libexecdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(libexecdir)/$$f"; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ ++ files=`for p in $$list; do echo "$$p"; done | \ ++ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ ++ -e 's/$$/$(EXEEXT)/' `; \ ++ test -n "$$list" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(libexecdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(libexecdir)" && rm -f $$files + + clean-libexecPROGRAMS: +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- echo " rm -f $$p $$f"; \ +- rm -f $$p $$f ; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$$list" || exit 0; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list || exit $$?; \ ++ test -n "$(EXEEXT)" || exit 0; \ ++ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list + charpick_applet2$(EXEEXT): $(charpick_applet2_OBJECTS) $(charpick_applet2_DEPENDENCIES) + @rm -f charpick_applet2$(EXEEXT) + $(LINK) $(charpick_applet2_OBJECTS) $(charpick_applet2_LDADD) $(LIBS) +@@ -429,21 +489,21 @@ + + .c.o: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c $< + + .c.obj: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: + @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< +@@ -456,54 +516,63 @@ + install-schemasDATA: $(schemas_DATA) + @$(NORMAL_INSTALL) + test -z "$(schemasdir)" || $(MKDIR_P) "$(DESTDIR)$(schemasdir)" +- @list='$(schemas_DATA)'; for p in $$list; do \ ++ @list='$(schemas_DATA)'; test -n "$(schemasdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(schemasDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(schemasdir)/$$f'"; \ +- $(schemasDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(schemasdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(schemasdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(schemasdir)" || exit $$?; \ + done + + uninstall-schemasDATA: + @$(NORMAL_UNINSTALL) +- @list='$(schemas_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(schemasdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(schemasdir)/$$f"; \ +- done ++ @list='$(schemas_DATA)'; test -n "$(schemasdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(schemasdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(schemasdir)" && rm -f $$files + install-serverDATA: $(server_DATA) + @$(NORMAL_INSTALL) + test -z "$(serverdir)" || $(MKDIR_P) "$(DESTDIR)$(serverdir)" +- @list='$(server_DATA)'; for p in $$list; do \ ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(serverDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(serverdir)/$$f'"; \ +- $(serverDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(serverdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(serverdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(serverdir)" || exit $$?; \ + done + + uninstall-serverDATA: + @$(NORMAL_UNINSTALL) +- @list='$(server_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(serverdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(serverdir)/$$f"; \ +- done ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(serverdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(serverdir)" && rm -f $$files + install-uiDATA: $(ui_DATA) + @$(NORMAL_INSTALL) + test -z "$(uidir)" || $(MKDIR_P) "$(DESTDIR)$(uidir)" +- @list='$(ui_DATA)'; for p in $$list; do \ ++ @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(uiDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(uidir)/$$f'"; \ +- $(uiDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(uidir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(uidir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(uidir)" || exit $$?; \ + done + + uninstall-uiDATA: + @$(NORMAL_UNINSTALL) +- @list='$(ui_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(uidir)/$$f'"; \ +- rm -f "$(DESTDIR)$(uidir)/$$f"; \ +- done ++ @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(uidir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(uidir)" && rm -f $$files + + # This directory's subdirectories are mostly independent; you can cd + # into them and run `make' without going through this Makefile. +@@ -529,7 +598,7 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ +@@ -563,16 +632,16 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" + tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) +@@ -587,7 +656,7 @@ + + TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ ++ set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ +@@ -599,7 +668,7 @@ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ +- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ ++ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ +@@ -608,29 +677,34 @@ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ shift; \ ++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique; \ ++ if test $$# -gt 0; then \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ "$$@" $$unique; \ ++ else \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$unique; \ ++ fi; \ + fi + ctags: CTAGS + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$tags $$unique ++ $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && cd $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) $$here ++ && $(am__cd) $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) "$$here" + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +@@ -651,29 +725,44 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ +- distdir=`$(am__cd) $(distdir) && pwd`; \ +- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ +- (cd $$subdir && \ ++ fi; \ ++ done ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ if test "$$subdir" = .; then :; else \ ++ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ ++ $(am__relativize); \ ++ new_distdir=$$reldir; \ ++ dir1=$$subdir; dir2="$(top_distdir)"; \ ++ $(am__relativize); \ ++ new_top_distdir=$$reldir; \ ++ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ ++ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ++ ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ +- top_distdir="$$top_distdir" \ +- distdir="$$distdir/$$subdir" \ ++ top_distdir="$$new_top_distdir" \ ++ distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ ++ am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ +@@ -707,6 +796,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -729,6 +819,8 @@ + + html: html-recursive + ++html-am: ++ + info: info-recursive + + info-am: +@@ -738,18 +830,28 @@ + + install-dvi: install-dvi-recursive + ++install-dvi-am: ++ + install-exec-am: install-libexecPROGRAMS + + install-html: install-html-recursive + ++install-html-am: ++ + install-info: install-info-recursive + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-recursive + ++install-pdf-am: ++ + install-ps: install-ps-recursive + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -773,8 +875,8 @@ + uninstall-am: uninstall-libexecPROGRAMS uninstall-schemasDATA \ + uninstall-serverDATA uninstall-uiDATA + +-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ +- install-strip ++.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ ++ install-am install-strip tags-recursive + + .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic \ +@@ -807,6 +909,7 @@ + @GCONF_SCHEMAS_INSTALL_TRUE@ GCONF_CONFIG_SOURCE=$(GCONF_SCHEMA_CONFIG_SOURCE) $(GCONFTOOL) --makefile-install-rule $(schemas_DATA) ; + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/config.h.in gnome-applets-2.28.0.ubuntu/config.h.in +--- gnome-applets-2.28.0/config.h.in 2009-09-21 08:19:30.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/config.h.in 2009-09-21 12:06:41.000000000 +0200 +@@ -139,6 +139,9 @@ + /* Define to the one symbol short name of this package. */ + #undef PACKAGE_TARNAME + ++/* Define to the home page for this package. */ ++#undef PACKAGE_URL ++ + /* Define to the version of this package. */ + #undef PACKAGE_VERSION + +diff -Nur gnome-applets-2.28.0/configure gnome-applets-2.28.0.ubuntu/configure +--- gnome-applets-2.28.0/configure 2009-09-21 08:19:30.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/configure 2009-09-21 12:06:41.000000000 +0200 +@@ -1,18 +1,20 @@ + #! /bin/sh + # Guess values for system-dependent variables and create Makefiles. +-# Generated by GNU Autoconf 2.63 for gnome-applets 2.28.0. ++# Generated by GNU Autoconf 2.64 for gnome-applets 2.28.0. + # + # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +-# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software ++# Foundation, Inc. ++# + # This configure script is free software; the Free Software Foundation + # gives unlimited permission to copy, distribute and modify it. +-## --------------------- ## +-## M4sh Initialization. ## +-## --------------------- ## ++## -------------------- ## ++## M4sh Initialization. ## ++## -------------------- ## + + # Be more Bourne compatible + DUALCASE=1; export DUALCASE # for MKS sh +-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which +@@ -20,23 +22,15 @@ + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST + else +- case `(set -o) 2>/dev/null` in +- *posix*) set -o posix ;; ++ case `(set -o) 2>/dev/null` in #( ++ *posix*) : ++ set -o posix ;; #( ++ *) : ++ ;; + esac +- + fi + + +- +- +-# PATH needs CR +-# Avoid depending upon Character Ranges. +-as_cr_letters='abcdefghijklmnopqrstuvwxyz' +-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +-as_cr_Letters=$as_cr_letters$as_cr_LETTERS +-as_cr_digits='0123456789' +-as_cr_alnum=$as_cr_Letters$as_cr_digits +- + as_nl=' + ' + export as_nl +@@ -44,7 +38,13 @@ + as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo + as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +-if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then ++# Prefer a ksh shell builtin over an external printf program on Solaris, ++# but without wasting forks for bash or zsh. ++if test -z "$BASH_VERSION$ZSH_VERSION" \ ++ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then ++ as_echo='print -r --' ++ as_echo_n='print -rn --' ++elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' + else +@@ -55,7 +55,7 @@ + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; +- case $arg in ++ case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; +@@ -78,13 +78,6 @@ + } + fi + +-# Support unset when possible. +-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then +- as_unset=unset +-else +- as_unset=false +-fi +- + + # IFS + # We need space, tab and new line, in precisely that order. Quoting is +@@ -94,15 +87,15 @@ + IFS=" "" $as_nl" + + # Find who we are. Look in the path if we contain no directory separator. +-case $0 in ++case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +-done ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++ done + IFS=$as_save_IFS + + ;; +@@ -114,12 +107,16 @@ + fi + if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 +- { (exit 1); exit 1; } ++ exit 1 + fi + +-# Work around bugs in pre-3.0 UWIN ksh. +-for as_var in ENV MAIL MAILPATH +-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++# Unset variables that we do not need and which cause bugs (e.g. in ++# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" ++# suppresses any "Segmentation fault" message there. '((' could ++# trigger a bug in pdksh 5.2.14. ++for as_var in BASH_ENV ENV MAIL MAILPATH ++do eval test x\${$as_var+set} = xset \ ++ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : + done + PS1='$ ' + PS2='> ' +@@ -131,330 +128,299 @@ + LANGUAGE=C + export LANGUAGE + +-# Required to use basename. +-if expr a : '\(a\)' >/dev/null 2>&1 && +- test "X`expr 00001 : '.*\(...\)'`" = X001; then +- as_expr=expr +-else +- as_expr=false +-fi +- +-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then +- as_basename=basename +-else +- as_basename=false +-fi +- +- +-# Name of the executable. +-as_me=`$as_basename -- "$0" || +-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ +- X"$0" : 'X\(//\)$' \| \ +- X"$0" : 'X\(/\)' \| . 2>/dev/null || +-$as_echo X/"$0" | +- sed '/^.*\/\([^/][^/]*\)\/*$/{ +- s//\1/ +- q +- } +- /^X\/\(\/\/\)$/{ +- s//\1/ +- q +- } +- /^X\/\(\/\).*/{ +- s//\1/ +- q +- } +- s/.*/./; q'` +- + # CDPATH. +-$as_unset CDPATH +- ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + if test "x$CONFIG_SHELL" = x; then +- if (eval ":") 2>/dev/null; then +- as_have_required=yes ++ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : ++ emulate sh ++ NULLCMD=: ++ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '\${1+\"\$@\"}'='\"\$@\"' ++ setopt NO_GLOB_SUBST + else +- as_have_required=no ++ case \`(set -o) 2>/dev/null\` in #( ++ *posix*) : ++ set -o posix ;; #( ++ *) : ++ ;; ++esac + fi +- +- if test $as_have_required = yes && (eval ": +-(as_func_return () { +- (exit \$1) +-} +-as_func_success () { +- as_func_return 0 +-} +-as_func_failure () { +- as_func_return 1 +-} +-as_func_ret_success () { +- return 0 +-} +-as_func_ret_failure () { +- return 1 +-} ++" ++ as_required="as_fn_return () { (exit \$1); } ++as_fn_success () { as_fn_return 0; } ++as_fn_failure () { as_fn_return 1; } ++as_fn_ret_success () { return 0; } ++as_fn_ret_failure () { return 1; } + + exitcode=0 +-if as_func_success; then +- : +-else +- exitcode=1 +- echo as_func_success failed. +-fi +- +-if as_func_failure; then +- exitcode=1 +- echo as_func_failure succeeded. +-fi +- +-if as_func_ret_success; then +- : +-else +- exitcode=1 +- echo as_func_ret_success failed. +-fi +- +-if as_func_ret_failure; then +- exitcode=1 +- echo as_func_ret_failure succeeded. +-fi +- +-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then +- : ++as_fn_success || { exitcode=1; echo as_fn_success failed.; } ++as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } ++as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } ++as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } ++if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : ++ ++else ++ exitcode=1; echo positional parameters were not saved. ++fi ++test x\$exitcode = x0 || exit 1" ++ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO ++ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO ++ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && ++ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 ++test \$(( 1 + 1 )) = 2 || exit 1" ++ if (eval "$as_required") 2>/dev/null; then : ++ as_have_required=yes + else +- exitcode=1 +- echo positional parameters were not saved. ++ as_have_required=no + fi ++ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : + +-test \$exitcode = 0) || { (exit 1); exit 1; } +- +-( +- as_lineno_1=\$LINENO +- as_lineno_2=\$LINENO +- test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && +- test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } +-") 2> /dev/null; then +- : + else +- as_candidate_shells= +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++as_found=false + for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- case $as_dir in ++ as_found=: ++ case $as_dir in #( + /*) + for as_base in sh bash ksh sh5; do +- as_candidate_shells="$as_candidate_shells $as_dir/$as_base" ++ # Try only shells that exist, to save several forks. ++ as_shell=$as_dir/$as_base ++ if { test -f "$as_shell" || test -f "$as_shell.exe"; } && ++ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : ++ CONFIG_SHELL=$as_shell as_have_required=yes ++ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : ++ break 2 ++fi ++fi + done;; + esac ++ as_found=false + done ++$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && ++ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : ++ CONFIG_SHELL=$SHELL as_have_required=yes ++fi; } + IFS=$as_save_IFS + + +- for as_shell in $as_candidate_shells $SHELL; do +- # Try only shells that exist, to save several forks. +- if { test -f "$as_shell" || test -f "$as_shell.exe"; } && +- { ("$as_shell") 2> /dev/null <<\_ASEOF +-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then +- emulate sh +- NULLCMD=: +- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which +- # is contrary to our usage. Disable this feature. +- alias -g '${1+"$@"}'='"$@"' +- setopt NO_GLOB_SUBST +-else +- case `(set -o) 2>/dev/null` in +- *posix*) set -o posix ;; +-esac +- +-fi +- +- +-: +-_ASEOF +-}; then +- CONFIG_SHELL=$as_shell +- as_have_required=yes +- if { "$as_shell" 2> /dev/null <<\_ASEOF +-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then +- emulate sh +- NULLCMD=: +- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which +- # is contrary to our usage. Disable this feature. +- alias -g '${1+"$@"}'='"$@"' +- setopt NO_GLOB_SUBST +-else +- case `(set -o) 2>/dev/null` in +- *posix*) set -o posix ;; +-esac +- +-fi +- +- +-: +-(as_func_return () { +- (exit $1) +-} +-as_func_success () { +- as_func_return 0 +-} +-as_func_failure () { +- as_func_return 1 +-} +-as_func_ret_success () { +- return 0 +-} +-as_func_ret_failure () { +- return 1 +-} +- +-exitcode=0 +-if as_func_success; then +- : +-else +- exitcode=1 +- echo as_func_success failed. +-fi +- +-if as_func_failure; then +- exitcode=1 +- echo as_func_failure succeeded. +-fi +- +-if as_func_ret_success; then +- : +-else +- exitcode=1 +- echo as_func_ret_success failed. +-fi +- +-if as_func_ret_failure; then +- exitcode=1 +- echo as_func_ret_failure succeeded. +-fi +- +-if ( set x; as_func_ret_success y && test x = "$1" ); then +- : +-else +- exitcode=1 +- echo positional parameters were not saved. +-fi +- +-test $exitcode = 0) || { (exit 1); exit 1; } +- +-( +- as_lineno_1=$LINENO +- as_lineno_2=$LINENO +- test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } +- +-_ASEOF +-}; then +- break +-fi +- +-fi +- +- done +- +- if test "x$CONFIG_SHELL" != x; then +- for as_var in BASH_ENV ENV +- do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +- done ++ if test "x$CONFIG_SHELL" != x; then : ++ # We cannot yet assume a decent shell, so we have to provide a ++ # neutralization value for shells without unset; and this also ++ # works around shells that cannot unset nonexistent variables. ++ BASH_ENV=/dev/null ++ ENV=/dev/null ++ (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} + fi + +- +- if test $as_have_required = no; then +- echo This script requires a shell more modern than all the +- echo shells that I found on your system. Please install a +- echo modern shell, or manually run the script under such a +- echo shell if you do have one. +- { (exit 1); exit 1; } ++ if test x$as_have_required = xno; then : ++ $as_echo "$0: This script requires a shell more modern than all" ++ $as_echo "$0: the shells that I found on your system." ++ if test x${ZSH_VERSION+set} = xset ; then ++ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" ++ $as_echo "$0: be upgraded to zsh 4.3.4 or later." ++ else ++ $as_echo "$0: Please tell bug-autoconf@gnu.org about your system, ++$0: including any error possibly output before this ++$0: message. Then install a modern shell, or manually run ++$0: the script under such a shell if you do have one." ++ fi ++ exit 1 + fi +- +- + fi +- + fi ++SHELL=${CONFIG_SHELL-/bin/sh} ++export SHELL ++# Unset more variables known to interfere with behavior of common tools. ++CLICOLOR_FORCE= GREP_OPTIONS= ++unset CLICOLOR_FORCE GREP_OPTIONS + ++## --------------------- ## ++## M4sh Shell Functions. ## ++## --------------------- ## ++# as_fn_unset VAR ++# --------------- ++# Portably unset VAR. ++as_fn_unset () ++{ ++ { eval $1=; unset $1;} ++} ++as_unset=as_fn_unset ++ ++# as_fn_set_status STATUS ++# ----------------------- ++# Set $? to STATUS, without forking. ++as_fn_set_status () ++{ ++ return $1 ++} # as_fn_set_status ++ ++# as_fn_exit STATUS ++# ----------------- ++# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. ++as_fn_exit () ++{ ++ set +e ++ as_fn_set_status $1 ++ exit $1 ++} # as_fn_exit ++ ++# as_fn_mkdir_p ++# ------------- ++# Create "$as_dir" as a directory, including parents if necessary. ++as_fn_mkdir_p () ++{ ++ ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || eval $as_mkdir_p || { ++ as_dirs= ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || ++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$as_dir" : 'X\(//\)[^/]' \| \ ++ X"$as_dir" : 'X\(//\)$' \| \ ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$as_dir" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break ++ done ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir" + + +-(eval "as_func_return () { +- (exit \$1) +-} +-as_func_success () { +- as_func_return 0 +-} +-as_func_failure () { +- as_func_return 1 +-} +-as_func_ret_success () { +- return 0 +-} +-as_func_ret_failure () { +- return 1 +-} ++} # as_fn_mkdir_p ++# as_fn_append VAR VALUE ++# ---------------------- ++# Append the text in VALUE to the end of the definition contained in VAR. Take ++# advantage of any shell optimizations that allow amortized linear growth over ++# repeated appends, instead of the typical quadratic growth present in naive ++# implementations. ++if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : ++ eval 'as_fn_append () ++ { ++ eval $1+=\$2 ++ }' ++else ++ as_fn_append () ++ { ++ eval $1=\$$1\$2 ++ } ++fi # as_fn_append + +-exitcode=0 +-if as_func_success; then +- : ++# as_fn_arith ARG... ++# ------------------ ++# Perform arithmetic evaluation on the ARGs, and store the result in the ++# global $as_val. Take advantage of shells that can avoid forks. The arguments ++# must be portable across $(()) and expr. ++if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : ++ eval 'as_fn_arith () ++ { ++ as_val=$(( $* )) ++ }' + else +- exitcode=1 +- echo as_func_success failed. +-fi ++ as_fn_arith () ++ { ++ as_val=`expr "$@" || test $? -eq 1` ++ } ++fi # as_fn_arith + +-if as_func_failure; then +- exitcode=1 +- echo as_func_failure succeeded. +-fi + +-if as_func_ret_success; then +- : ++# as_fn_error ERROR [LINENO LOG_FD] ++# --------------------------------- ++# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are ++# provided, also output the error to LOG_FD, referencing LINENO. Then exit the ++# script with status $?, using 1 if that was 0. ++as_fn_error () ++{ ++ as_status=$?; test $as_status -eq 0 && as_status=1 ++ if test "$3"; then ++ as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3 ++ fi ++ $as_echo "$as_me: error: $1" >&2 ++ as_fn_exit $as_status ++} # as_fn_error ++ ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then ++ as_expr=expr + else +- exitcode=1 +- echo as_func_ret_success failed. ++ as_expr=false + fi + +-if as_func_ret_failure; then +- exitcode=1 +- echo as_func_ret_failure succeeded. ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then ++ as_basename=basename ++else ++ as_basename=false + fi + +-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then +- : ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname + else +- exitcode=1 +- echo positional parameters were not saved. ++ as_dirname=false + fi + +-test \$exitcode = 0") || { +- echo No shell found that supports shell functions. +- echo Please tell bug-autoconf@gnu.org about your system, +- echo including any error possibly output before this message. +- echo This can help us improve future autoconf versions. +- echo Configuration will now proceed without shell functions. +-} ++as_me=`$as_basename -- "$0" || ++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ ++ X"$0" : 'X\(//\)$' \| \ ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X/"$0" | ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits + + +- as_lineno_1=$LINENO +- as_lineno_2=$LINENO +- test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { +- +- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO +- # uniformly replaced by the line number. The first 'sed' inserts a +- # line-number line after each line using $LINENO; the second 'sed' +- # does the real work. The second script uses 'N' to pair each +- # line-number line with the line containing $LINENO, and appends +- # trailing '-' during substitution so that $LINENO is not a special +- # case at line end. +- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the +- # scripts with optimization help from Paolo Bonzini. Blame Lee +- # E. McMahon (1931-1989) for sed's syntax. :-) ++ as_lineno_1=$LINENO as_lineno_1a=$LINENO ++ as_lineno_2=$LINENO as_lineno_2a=$LINENO ++ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && ++ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { ++ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= +@@ -471,8 +437,7 @@ + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || +- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 +- { (exit 1); exit 1; }; } ++ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the +@@ -482,29 +447,18 @@ + exit + } + +- +-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then +- as_dirname=dirname +-else +- as_dirname=false +-fi +- + ECHO_C= ECHO_N= ECHO_T= +-case `echo -n x` in ++case `echo -n x` in #((((( + -n*) +- case `echo 'x\c'` in ++ case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. +- *) ECHO_C='\c';; ++ xy) ECHO_C='\c';; ++ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ++ ECHO_T=' ';; + esac;; + *) + ECHO_N='-n';; + esac +-if expr a : '\(a\)' >/dev/null 2>&1 && +- test "X`expr 00001 : '.*\(...\)'`" = X001; then +- as_expr=expr +-else +- as_expr=false +-fi + + rm -f conf$$ conf$$.exe conf$$.file + if test -d conf$$.dir; then +@@ -534,7 +488,7 @@ + rmdir conf$$.dir 2>/dev/null + + if mkdir -p . 2>/dev/null; then +- as_mkdir_p=: ++ as_mkdir_p='mkdir -p "$as_dir"' + else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +@@ -553,10 +507,10 @@ + if test -d "$1"; then + test -d "$1/."; + else +- case $1 in ++ case $1 in #( + -*)set "./$1";; + esac; +- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +@@ -571,7 +525,6 @@ + + + +- + # Check that we are running under the correct shell. + SHELL=${CONFIG_SHELL-/bin/sh} + +@@ -738,7 +691,6 @@ + subdirs= + MFLAGS= + MAKEFLAGS= +-SHELL=${CONFIG_SHELL-/bin/sh} + + # Identity of this package. + PACKAGE_NAME='gnome-applets' +@@ -746,6 +698,7 @@ + PACKAGE_VERSION='2.28.0' + PACKAGE_STRING='gnome-applets 2.28.0' + PACKAGE_BUGREPORT='' ++PACKAGE_URL='' + + # Factoring default headers for most tests. + ac_includes_default="\ +@@ -783,7 +736,9 @@ + # include + #endif" + +-ac_subst_vars='LTLIBOBJS ++ac_subst_vars='am__EXEEXT_FALSE ++am__EXEEXT_TRUE ++LTLIBOBJS + LIBOBJS + BUILDERDIR + PYTHONDIR +@@ -1067,6 +1022,7 @@ + program_transform_name + prefix + exec_prefix ++PACKAGE_URL + PACKAGE_BUGREPORT + PACKAGE_STRING + PACKAGE_VERSION +@@ -1268,8 +1224,7 @@ + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && +- { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 +- { (exit 1); exit 1; }; } ++ as_fn_error "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in +@@ -1295,8 +1250,7 @@ + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && +- { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 +- { (exit 1); exit 1; }; } ++ as_fn_error "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in +@@ -1500,8 +1454,7 @@ + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && +- { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 +- { (exit 1); exit 1; }; } ++ as_fn_error "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in +@@ -1517,8 +1470,7 @@ + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && +- { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 +- { (exit 1); exit 1; }; } ++ as_fn_error "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in +@@ -1548,17 +1500,17 @@ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + +- -*) { $as_echo "$as_me: error: unrecognized option: $ac_option +-Try \`$0 --help' for more information." >&2 +- { (exit 1); exit 1; }; } ++ -*) as_fn_error "unrecognized option: \`$ac_option' ++Try \`$0 --help' for more information." + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. +- expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && +- { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2 +- { (exit 1); exit 1; }; } ++ case $ac_envvar in #( ++ '' | [0-9]* | *[!_$as_cr_alnum]* ) ++ as_fn_error "invalid variable name: \`$ac_envvar'" ;; ++ esac + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + +@@ -1575,15 +1527,13 @@ + + if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` +- { $as_echo "$as_me: error: missing argument to $ac_option" >&2 +- { (exit 1); exit 1; }; } ++ as_fn_error "missing argument to $ac_option" + fi + + if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; +- fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2 +- { (exit 1); exit 1; }; } ;; ++ fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac + fi +@@ -1606,8 +1556,7 @@ + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac +- { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 +- { (exit 1); exit 1; }; } ++ as_fn_error "expected an absolute directory name for --$ac_var: $ac_val" + done + + # There might be people who depend on the old broken behavior: `$host' +@@ -1637,11 +1586,9 @@ + ac_pwd=`pwd` && test -n "$ac_pwd" && + ac_ls_di=`ls -di .` && + ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || +- { $as_echo "$as_me: error: working directory cannot be determined" >&2 +- { (exit 1); exit 1; }; } ++ as_fn_error "working directory cannot be determined" + test "X$ac_ls_di" = "X$ac_pwd_ls_di" || +- { $as_echo "$as_me: error: pwd does not report name of working directory" >&2 +- { (exit 1); exit 1; }; } ++ as_fn_error "pwd does not report name of working directory" + + + # Find the source files, if location was not specified. +@@ -1680,13 +1627,11 @@ + fi + if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." +- { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 +- { (exit 1); exit 1; }; } ++ as_fn_error "cannot find sources ($ac_unique_file) in $srcdir" + fi + ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" + ac_abs_confdir=`( +- cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2 +- { (exit 1); exit 1; }; } ++ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg" + pwd)` + # When building in place, set srcdir=. + if test "$ac_abs_confdir" = "$ac_pwd"; then +@@ -1811,7 +1756,8 @@ + --enable-polkit Enable PolicyKit support [default auto] + --enable-networkmanager Enable NetworkManager support [default=yes] + --enable-mixer-applet Enable the gstreamer-based mixer applet. +- --disable-schemas-install Disable the schemas installation ++ --disable-schemas-install ++ Disable the schemas installation + --disable-scrollkeeper do not make updates to the scrollkeeper database + --enable-flags Enable flags usage in the keyboard indicators + --disable-battstat=[no/yes] +@@ -1925,6 +1871,7 @@ + Use these variables to override the choices made by `configure' or to help + it to find libraries and programs with nonstandard names/locations. + ++Report bugs to the package provider. + _ACEOF + ac_status=$? + fi +@@ -1988,21 +1935,468 @@ + if $ac_init_version; then + cat <<\_ACEOF + gnome-applets configure 2.28.0 +-generated by GNU Autoconf 2.63 ++generated by GNU Autoconf 2.64 ++ ++Copyright (C) 2009 Free Software Foundation, Inc. ++This configure script is free software; the Free Software Foundation ++gives unlimited permission to copy, distribute and modify it. ++_ACEOF ++ exit ++fi ++ ++## ------------------------ ## ++## Autoconf initialization. ## ++## ------------------------ ## ++ ++# ac_fn_c_try_compile LINENO ++# -------------------------- ++# Try to compile conftest.$ac_ext, and return whether this succeeded. ++ac_fn_c_try_compile () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ rm -f conftest.$ac_objext ++ if { { ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_compile") 2>conftest.err ++ ac_status=$? ++ if test -s conftest.err; then ++ grep -v '^ *+' conftest.err >conftest.er1 ++ cat conftest.er1 >&5 ++ mv -f conftest.er1 conftest.err ++ fi ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then : ++ ac_retval=0 ++else ++ $as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_retval=1 ++fi ++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} ++ return $ac_retval ++ ++} # ac_fn_c_try_compile ++ ++# ac_fn_c_try_link LINENO ++# ----------------------- ++# Try to link conftest.$ac_ext, and return whether this succeeded. ++ac_fn_c_try_link () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ rm -f conftest.$ac_objext conftest$ac_exeext ++ if { { ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_link") 2>conftest.err ++ ac_status=$? ++ if test -s conftest.err; then ++ grep -v '^ *+' conftest.err >conftest.er1 ++ cat conftest.er1 >&5 ++ mv -f conftest.er1 conftest.err ++ fi ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && { ++ test "$cross_compiling" = yes || ++ $as_test_x conftest$ac_exeext ++ }; then : ++ ac_retval=0 ++else ++ $as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_retval=1 ++fi ++ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information ++ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would ++ # interfere with the next link command; also delete a directory that is ++ # left behind by Apple's compiler. We do this before executing the actions. ++ rm -rf conftest.dSYM conftest_ipa8_conftest.oo ++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} ++ return $ac_retval ++ ++} # ac_fn_c_try_link ++ ++# ac_fn_c_check_func LINENO FUNC VAR ++# ---------------------------------- ++# Tests whether FUNC exists, setting the cache variable VAR accordingly ++ac_fn_c_check_func () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 ++$as_echo_n "checking for $2... " >&6; } ++if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++/* Define $2 to an innocuous variant, in case declares $2. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define $2 innocuous_$2 ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char $2 (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef $2 ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char $2 (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_$2 || defined __stub___$2 ++choke me ++#endif ++ ++int ++main () ++{ ++return $2 (); ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_link "$LINENO"; then : ++ eval "$3=yes" ++else ++ eval "$3=no" ++fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++eval ac_res=\$$3 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 ++$as_echo "$ac_res" >&6; } ++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} ++ ++} # ac_fn_c_check_func ++ ++# ac_fn_c_try_cpp LINENO ++# ---------------------- ++# Try to preprocess conftest.$ac_ext, and return whether this succeeded. ++ac_fn_c_try_cpp () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ if { { ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err ++ ac_status=$? ++ if test -s conftest.err; then ++ grep -v '^ *+' conftest.err >conftest.er1 ++ cat conftest.er1 >&5 ++ mv -f conftest.er1 conftest.err ++ fi ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then : ++ ac_retval=0 ++else ++ $as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_retval=1 ++fi ++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} ++ return $ac_retval ++ ++} # ac_fn_c_try_cpp ++ ++# ac_fn_c_try_run LINENO ++# ---------------------- ++# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes ++# that executables *can* be run. ++ac_fn_c_try_run () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ if { { ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_link") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' ++ { { case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; }; then : ++ ac_retval=0 ++else ++ $as_echo "$as_me: program exited with status $ac_status" >&5 ++ $as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_retval=$ac_status ++fi ++ rm -rf conftest.dSYM conftest_ipa8_conftest.oo ++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} ++ return $ac_retval ++ ++} # ac_fn_c_try_run ++ ++# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES ++# ------------------------------------------------------- ++# Tests whether HEADER exists and can be compiled using the include files in ++# INCLUDES, setting the cache variable VAR accordingly. ++ac_fn_c_check_header_compile () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 ++$as_echo_n "checking for $2... " >&6; } ++if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++$4 ++#include <$2> ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ eval "$3=yes" ++else ++ eval "$3=no" ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++eval ac_res=\$$3 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 ++$as_echo "$ac_res" >&6; } ++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} ++ ++} # ac_fn_c_check_header_compile ++ ++# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES ++# ------------------------------------------------------- ++# Tests whether HEADER exists, giving a warning if it cannot be compiled using ++# the include files in INCLUDES and setting the cache variable VAR ++# accordingly. ++ac_fn_c_check_header_mongrel () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 ++$as_echo_n "checking for $2... " >&6; } ++if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : ++ $as_echo_n "(cached) " >&6 ++fi ++eval ac_res=\$$3 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 ++$as_echo "$ac_res" >&6; } ++else ++ # Is the header compilable? ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 ++$as_echo_n "checking $2 usability... " >&6; } ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++$4 ++#include <$2> ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ ac_header_compiler=yes ++else ++ ac_header_compiler=no ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 ++$as_echo "$ac_header_compiler" >&6; } ++ ++# Is the header present? ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 ++$as_echo_n "checking $2 presence... " >&6; } ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include <$2> ++_ACEOF ++if ac_fn_c_try_cpp "$LINENO"; then : ++ ac_header_preproc=yes ++else ++ ac_header_preproc=no ++fi ++rm -f conftest.err conftest.$ac_ext ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 ++$as_echo "$ac_header_preproc" >&6; } ++ ++# So? What about this header? ++case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( ++ yes:no: ) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 ++$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 ++$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ++ ;; ++ no:yes:* ) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 ++$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 ++$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 ++$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 ++$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 ++$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ++ ;; ++esac ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 ++$as_echo_n "checking for $2... " >&6; } ++if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : ++ $as_echo_n "(cached) " >&6 ++else ++ eval "$3=\$ac_header_compiler" ++fi ++eval ac_res=\$$3 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 ++$as_echo "$ac_res" >&6; } ++fi ++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} ++ ++} # ac_fn_c_check_header_mongrel ++ ++# ac_fn_c_check_member LINENO AGGR MEMBER VAR INCLUDES ++# ---------------------------------------------------- ++# Tries to find if the field MEMBER exists in type AGGR, after including ++# INCLUDES, setting cache variable VAR accordingly. ++ac_fn_c_check_member () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2.$3" >&5 ++$as_echo_n "checking for $2.$3... " >&6; } ++if { as_var=$4; eval "test \"\${$as_var+set}\" = set"; }; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++$5 ++int ++main () ++{ ++static $2 ac_aggr; ++if (ac_aggr.$3) ++return 0; ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ eval "$4=yes" ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++$5 ++int ++main () ++{ ++static $2 ac_aggr; ++if (sizeof ac_aggr.$3) ++return 0; ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ eval "$4=yes" ++else ++ eval "$4=no" ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++eval ac_res=\$$4 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 ++$as_echo "$ac_res" >&6; } ++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} ++ ++} # ac_fn_c_check_member ++ ++# ac_fn_c_check_decl LINENO SYMBOL VAR ++# ------------------------------------ ++# Tests whether SYMBOL is declared, setting cache variable VAR accordingly. ++ac_fn_c_check_decl () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $2 is declared" >&5 ++$as_echo_n "checking whether $2 is declared... " >&6; } ++if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++$4 ++int ++main () ++{ ++#ifndef $2 ++ (void) $2; ++#endif + +-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +-This configure script is free software; the Free Software Foundation +-gives unlimited permission to copy, distribute and modify it. ++ ; ++ return 0; ++} + _ACEOF +- exit ++if ac_fn_c_try_compile "$LINENO"; then : ++ eval "$3=yes" ++else ++ eval "$3=no" ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi ++eval ac_res=\$$3 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 ++$as_echo "$ac_res" >&6; } ++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} ++ ++} # ac_fn_c_check_decl + cat >config.log <<_ACEOF + This file contains any messages produced by compilers while + running configure, to aid debugging if configure makes a mistake. + + It was created by gnome-applets $as_me 2.28.0, which was +-generated by GNU Autoconf 2.63. Invocation command line was ++generated by GNU Autoconf 2.64. Invocation command line was + + $ $0 $@ + +@@ -2038,8 +2432,8 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- $as_echo "PATH: $as_dir" +-done ++ $as_echo "PATH: $as_dir" ++ done + IFS=$as_save_IFS + + } >&5 +@@ -2076,9 +2470,9 @@ + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in +- 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; ++ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) +- ac_configure_args1="$ac_configure_args1 '$ac_arg'" ++ as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else +@@ -2094,13 +2488,13 @@ + -* ) ac_must_keep_next=true ;; + esac + fi +- ac_configure_args="$ac_configure_args '$ac_arg'" ++ as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done + done +-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } ++{ ac_configure_args0=; unset ac_configure_args0;} ++{ ac_configure_args1=; unset ac_configure_args1;} + + # When interrupted or exit'd, cleanup temporary files, and complete + # config.log. We remove comments because anyway the quotes in there +@@ -2125,13 +2519,13 @@ + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( +- *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 ++ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 + $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( +- *) $as_unset $ac_var ;; ++ *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done +@@ -2203,39 +2597,41 @@ + exit $exit_status + ' 0 + for ac_signal in 1 2 13 15; do +- trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal ++ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal + done + ac_signal=0 + + # confdefs.h avoids OS command line length limits that DEFS can exceed. + rm -f -r conftest* confdefs.h + ++$as_echo "/* confdefs.h */" > confdefs.h ++ + # Predefined preprocessor variables. + + cat >>confdefs.h <<_ACEOF + #define PACKAGE_NAME "$PACKAGE_NAME" + _ACEOF + +- + cat >>confdefs.h <<_ACEOF + #define PACKAGE_TARNAME "$PACKAGE_TARNAME" + _ACEOF + +- + cat >>confdefs.h <<_ACEOF + #define PACKAGE_VERSION "$PACKAGE_VERSION" + _ACEOF + +- + cat >>confdefs.h <<_ACEOF + #define PACKAGE_STRING "$PACKAGE_STRING" + _ACEOF + +- + cat >>confdefs.h <<_ACEOF + #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" + _ACEOF + ++cat >>confdefs.h <<_ACEOF ++#define PACKAGE_URL "$PACKAGE_URL" ++_ACEOF ++ + + # Let the site file select an alternate cache file if it wants to. + # Prefer an explicitly selected file to automatically selected ones. +@@ -2254,7 +2650,7 @@ + do + test "x$ac_site_file" = xNONE && continue + if test -r "$ac_site_file"; then +- { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 + $as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" +@@ -2265,7 +2661,7 @@ + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then +- { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 + $as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; +@@ -2273,7 +2669,7 @@ + esac + fi + else +- { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 + $as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file + fi +@@ -2288,11 +2684,11 @@ + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) +- { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 + $as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) +- { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 + $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; +@@ -2302,17 +2698,17 @@ + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then +- { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 + $as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else +- { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 + $as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi +- { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 + $as_echo "$as_me: former value: \`$ac_old_val'" >&2;} +- { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 + $as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac +@@ -2324,43 +2720,20 @@ + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. +- *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; ++ *) as_fn_append ac_configure_args " '$ac_arg'" ;; + esac + fi + done + if $ac_cache_corrupted; then +- { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +- { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 + $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} +- { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +-$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 + fi +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- ++## -------------------- ## ++## Main body of script. ## ++## -------------------- ## + + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' +@@ -2373,28 +2746,20 @@ + + ac_config_headers="$ac_config_headers config.h" + +-am__api_version='1.10' ++am__api_version='1.11' + + ac_aux_dir= + for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do +- if test -f "$ac_dir/install-sh"; then +- ac_aux_dir=$ac_dir +- ac_install_sh="$ac_aux_dir/install-sh -c" +- break +- elif test -f "$ac_dir/install.sh"; then +- ac_aux_dir=$ac_dir +- ac_install_sh="$ac_aux_dir/install.sh -c" +- break +- elif test -f "$ac_dir/shtool"; then +- ac_aux_dir=$ac_dir +- ac_install_sh="$ac_aux_dir/shtool install -c" +- break +- fi ++ for ac_t in install-sh install.sh shtool; do ++ if test -f "$ac_dir/$ac_t"; then ++ ac_aux_dir=$ac_dir ++ ac_install_sh="$ac_aux_dir/$ac_t -c" ++ break 2 ++ fi ++ done + done + if test -z "$ac_aux_dir"; then +- { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 +-$as_echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 + fi + + # These three variables are undocumented and unsupported, +@@ -2420,10 +2785,10 @@ + # OS/2's system install, which has a completely different semantic + # ./install, which can be erroneously created by make from ./install.sh. + # Reject install programs that cannot install multiple files. +-{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 + $as_echo_n "checking for a BSD-compatible install... " >&6; } + if test -z "$INSTALL"; then +-if test "${ac_cv_path_install+set}" = set; then ++if test "${ac_cv_path_install+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +@@ -2431,11 +2796,11 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- # Account for people who put trailing slashes in PATH elements. +-case $as_dir/ in +- ./ | .// | /cC/* | \ ++ # Account for people who put trailing slashes in PATH elements. ++case $as_dir/ in #(( ++ ./ | .// | /[cC]/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ +- ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ ++ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. +@@ -2472,7 +2837,7 @@ + ;; + esac + +-done ++ done + IFS=$as_save_IFS + + rm -rf conftest.one conftest.two conftest.dir +@@ -2488,7 +2853,7 @@ + INSTALL=$ac_install_sh + fi + fi +-{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 + $as_echo "$INSTALL" >&6; } + + # Use test -z because SunOS4 sh mishandles braces in ${var-val}. +@@ -2499,21 +2864,34 @@ + + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +-{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 + $as_echo_n "checking whether build environment is sane... " >&6; } + # Just in case + sleep 1 + echo timestamp > conftest.file ++# Reject unsafe characters in $srcdir or the absolute working directory ++# name. Accept space and tab only in the latter. ++am_lf=' ++' ++case `pwd` in ++ *[\\\"\#\$\&\'\`$am_lf]*) ++ as_fn_error "unsafe absolute working directory name" "$LINENO" 5;; ++esac ++case $srcdir in ++ *[\\\"\#\$\&\'\`$am_lf\ \ ]*) ++ as_fn_error "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; ++esac ++ + # Do `set' in a subshell so we don't clobber the current shell's + # arguments. Must try -L first in case configure is actually a + # symlink; some systems play weird games with the mod time of symlinks + # (eg FreeBSD returns the mod time of the symlink's containing + # directory). + if ( +- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` ++ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. +- set X `ls -t $srcdir/configure conftest.file` ++ set X `ls -t "$srcdir/configure" conftest.file` + fi + rm -f conftest.file + if test "$*" != "X $srcdir/configure conftest.file" \ +@@ -2523,11 +2901,8 @@ + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". +- { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken +-alias in your environment" >&5 +-$as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken +-alias in your environment" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "ls -t appears to fail. Make sure there is not a broken ++alias in your environment" "$LINENO" 5 + fi + + test "$2" = conftest.file +@@ -2536,13 +2911,10 @@ + # Ok. + : + else +- { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files! +-Check your system clock" >&5 +-$as_echo "$as_me: error: newly created file is older than distributed files! +-Check your system clock" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "newly created file is older than distributed files! ++Check your system clock" "$LINENO" 5 + fi +-{ $as_echo "$as_me:$LINENO: result: yes" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +@@ -2557,20 +2929,136 @@ + # expand $ac_aux_dir to an absolute path + am_aux_dir=`cd $ac_aux_dir && pwd` + +-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" ++if test x"${MISSING+set}" != xset; then ++ case $am_aux_dir in ++ *\ * | *\ *) ++ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; ++ *) ++ MISSING="\${SHELL} $am_aux_dir/missing" ;; ++ esac ++fi + # Use eval to expand $SHELL + if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " + else + am_missing_run= +- { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 + $as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} + fi + +-{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5 ++if test x"${install_sh}" != xset; then ++ case $am_aux_dir in ++ *\ * | *\ *) ++ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; ++ *) ++ install_sh="\${SHELL} $am_aux_dir/install-sh" ++ esac ++fi ++ ++# Installed binaries are usually stripped using `strip' when the user ++# run `make install-strip'. However `strip' might not be the right ++# tool to use in cross-compilation environments, therefore Automake ++# will honor the `STRIP' environment variable to overrule this program. ++if test "$cross_compiling" != no; then ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. ++set dummy ${ac_tool_prefix}strip; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_STRIP+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$STRIP"; then ++ ac_cv_prog_STRIP="$STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_STRIP="${ac_tool_prefix}strip" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++STRIP=$ac_cv_prog_STRIP ++if test -n "$STRIP"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 ++$as_echo "$STRIP" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_STRIP"; then ++ ac_ct_STRIP=$STRIP ++ # Extract the first word of "strip", so it can be a program name with args. ++set dummy strip; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_STRIP"; then ++ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_STRIP="strip" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP ++if test -n "$ac_ct_STRIP"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 ++$as_echo "$ac_ct_STRIP" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ if test "x$ac_ct_STRIP" = x; then ++ STRIP=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ STRIP=$ac_ct_STRIP ++ fi ++else ++ STRIP="$ac_cv_prog_STRIP" ++fi ++ ++fi ++INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 + $as_echo_n "checking for a thread-safe mkdir -p... " >&6; } + if test -z "$MKDIR_P"; then +- if test "${ac_cv_path_mkdir+set}" = set; then ++ if test "${ac_cv_path_mkdir+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +@@ -2578,7 +3066,7 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_prog in mkdir gmkdir; do ++ for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( +@@ -2590,7 +3078,7 @@ + esac + done + done +-done ++ done + IFS=$as_save_IFS + + fi +@@ -2606,7 +3094,7 @@ + MKDIR_P="$ac_install_sh -d" + fi + fi +-{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 + $as_echo "$MKDIR_P" >&6; } + + mkdir_p="$MKDIR_P" +@@ -2619,9 +3107,9 @@ + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_AWK+set}" = set; then ++if test "${ac_cv_prog_AWK+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$AWK"; then +@@ -2632,24 +3120,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AWK="$ac_prog" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + AWK=$ac_cv_prog_AWK + if test -n "$AWK"; then +- { $as_echo "$as_me:$LINENO: result: $AWK" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 + $as_echo "$AWK" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -2657,11 +3145,11 @@ + test -n "$AWK" && break + done + +-{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 + $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } + set x ${MAKE-make} + ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then ++if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then : + $as_echo_n "(cached) " >&6 + else + cat >conftest.make <<\_ACEOF +@@ -2679,11 +3167,11 @@ + rm -f conftest.make + fi + if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then +- { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + SET_MAKE= + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" + fi +@@ -2703,9 +3191,7 @@ + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then +- { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 +-$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 + fi + fi + +@@ -2749,108 +3235,6 @@ + + MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +-install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} +- +-# Installed binaries are usually stripped using `strip' when the user +-# run `make install-strip'. However `strip' might not be the right +-# tool to use in cross-compilation environments, therefore Automake +-# will honor the `STRIP' environment variable to overrule this program. +-if test "$cross_compiling" != no; then +- if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +-set dummy ${ac_tool_prefix}strip; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_STRIP+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- if test -n "$STRIP"; then +- ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +-else +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_STRIP="${ac_tool_prefix}strip" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +-done +-IFS=$as_save_IFS +- +-fi +-fi +-STRIP=$ac_cv_prog_STRIP +-if test -n "$STRIP"; then +- { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 +-$as_echo "$STRIP" >&6; } +-else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } +-fi +- +- +-fi +-if test -z "$ac_cv_prog_STRIP"; then +- ac_ct_STRIP=$STRIP +- # Extract the first word of "strip", so it can be a program name with args. +-set dummy strip; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- if test -n "$ac_ct_STRIP"; then +- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +-else +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_ac_ct_STRIP="strip" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +-done +-IFS=$as_save_IFS +- +-fi +-fi +-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +-if test -n "$ac_ct_STRIP"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +-$as_echo "$ac_ct_STRIP" >&6; } +-else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } +-fi +- +- if test "x$ac_ct_STRIP" = x; then +- STRIP=":" +- else +- case $cross_compiling:$ac_tool_warned in +-yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +-ac_tool_warned=yes ;; +-esac +- STRIP=$ac_ct_STRIP +- fi +-else +- STRIP="$ac_cv_prog_STRIP" +-fi +- +-fi +-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +- + # We need awk for the "check" target. The system "awk" is bad on + # some platforms. + # Always define AMTAR for backward compatibility. +@@ -2891,16 +3275,17 @@ + NETWORKMANAGER_REQUIRED=0.7 + GST10_REQUIRED=0.10.2 + +-{ $as_echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 + $as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } + # Check whether --enable-maintainer-mode was given. +-if test "${enable_maintainer_mode+set}" = set; then ++if test "${enable_maintainer_mode+set}" = set; then : + enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval + else + USE_MAINTAINER_MODE=no + fi + +- { $as_echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 + $as_echo "$USE_MAINTAINER_MODE" >&6; } + if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= +@@ -2915,16 +3300,16 @@ + + + +- { $as_echo "$as_me:$LINENO: checking whether NLS is requested" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5 + $as_echo_n "checking whether NLS is requested... " >&6; } + # Check whether --enable-nls was given. +-if test "${enable_nls+set}" = set; then ++if test "${enable_nls+set}" = set; then : + enableval=$enable_nls; USE_NLS=$enableval + else + USE_NLS=yes + fi + +- { $as_echo "$as_me:$LINENO: result: $USE_NLS" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5 + $as_echo "$USE_NLS" >&6; } + + +@@ -2936,44 +3321,44 @@ + am_make=${MAKE-make} + cat > confinc << 'END' + am__doit: +- @echo done ++ @echo this is the am__doit target + .PHONY: am__doit + END + # If we don't find an include directive, just comment out the code. +-{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 + $as_echo_n "checking for style of include used by $am_make... " >&6; } + am__include="#" + am__quote= + _am_result=none + # First try GNU make style include. + echo "include confinc" > confmf +-# We grep out `Entering directory' and `Leaving directory' +-# messages which can occur if `w' ends up in MAKEFLAGS. +-# In particular we don't look at `^make:' because GNU make might +-# be invoked under some other name (usually "gmake"), in which +-# case it prints its new name instead of `make'. +-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then +- am__include=include +- am__quote= +- _am_result=GNU +-fi ++# Ignore all kinds of additional output from `make'. ++case `$am_make -s -f confmf 2> /dev/null` in #( ++*the\ am__doit\ target*) ++ am__include=include ++ am__quote= ++ _am_result=GNU ++ ;; ++esac + # Now try BSD make style include. + if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf +- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then +- am__include=.include +- am__quote="\"" +- _am_result=BSD +- fi ++ case `$am_make -s -f confmf 2> /dev/null` in #( ++ *the\ am__doit\ target*) ++ am__include=.include ++ am__quote="\"" ++ _am_result=BSD ++ ;; ++ esac + fi + + +-{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 + $as_echo "$_am_result" >&6; } + rm -f confinc confmf + + # Check whether --enable-dependency-tracking was given. +-if test "${enable_dependency_tracking+set}" = set; then ++if test "${enable_dependency_tracking+set}" = set; then : + enableval=$enable_dependency_tracking; + fi + +@@ -2998,9 +3383,9 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. + set dummy ${ac_tool_prefix}gcc; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_CC+set}" = set; then ++if test "${ac_cv_prog_CC+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$CC"; then +@@ -3011,24 +3396,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- { $as_echo "$as_me:$LINENO: result: $CC" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 + $as_echo "$CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -3038,9 +3423,9 @@ + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. + set dummy gcc; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then ++if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$ac_ct_CC"; then +@@ -3051,24 +3436,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="gcc" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 + $as_echo "$ac_ct_CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -3077,7 +3462,7 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 + $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} + ac_tool_warned=yes ;; + esac +@@ -3091,9 +3476,9 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. + set dummy ${ac_tool_prefix}cc; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_CC+set}" = set; then ++if test "${ac_cv_prog_CC+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$CC"; then +@@ -3104,24 +3489,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}cc" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- { $as_echo "$as_me:$LINENO: result: $CC" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 + $as_echo "$CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -3131,9 +3516,9 @@ + if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. + set dummy cc; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_CC+set}" = set; then ++if test "${ac_cv_prog_CC+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$CC"; then +@@ -3145,18 +3530,18 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + if test $ac_prog_rejected = yes; then +@@ -3175,10 +3560,10 @@ + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- { $as_echo "$as_me:$LINENO: result: $CC" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 + $as_echo "$CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -3190,9 +3575,9 @@ + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. + set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_CC+set}" = set; then ++if test "${ac_cv_prog_CC+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$CC"; then +@@ -3203,24 +3588,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- { $as_echo "$as_me:$LINENO: result: $CC" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 + $as_echo "$CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -3234,9 +3619,9 @@ + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then ++if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$ac_ct_CC"; then +@@ -3247,24 +3632,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="$ac_prog" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 + $as_echo "$ac_ct_CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -3277,7 +3662,7 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 + $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} + ac_tool_warned=yes ;; + esac +@@ -3288,73 +3673,55 @@ + fi + + +-test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 ++test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +-{ { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +-See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: no acceptable C compiler found in \$PATH +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; }; } ++as_fn_error "no acceptable C compiler found in \$PATH ++See \`config.log' for more details." "$LINENO" 5; } + + # Provide some information about the compiler. +-$as_echo "$as_me:$LINENO: checking for C compiler version" >&5 ++$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 + set X $ac_compile + ac_compiler=$2 +-{ (ac_try="$ac_compiler --version >&5" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compiler --version >&5") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +-{ (ac_try="$ac_compiler -v >&5" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compiler -v >&5") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +-{ (ac_try="$ac_compiler -V >&5" ++for ac_option in --version -v -V -qversion; do ++ { { ac_try="$ac_compiler $ac_option >&5" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compiler -V >&5") 2>&5 ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } ++ if test -s conftest.err; then ++ sed '10a\ ++... rest of stderr output deleted ... ++ 10q' conftest.err >conftest.er1 ++ cat conftest.er1 >&5 ++ rm -f conftest.er1 conftest.err ++ fi ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } ++done + +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ +- ++#include + int + main () + { ++FILE *f = fopen ("conftest.out", "w"); ++ return ferror (f) || fclose (f) != 0; + + ; + return 0; + } + _ACEOF + ac_clean_files_save=$ac_clean_files +-ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" ++ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out conftest.out" + # Try to create an executable without -o first, disregard a.out. + # It will help us diagnose broken compilers, and finding out an intuition + # of exeext. +-{ $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 + $as_echo_n "checking for C compiler default output file name... " >&6; } + ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +@@ -3371,17 +3738,17 @@ + done + rm -f $ac_rmfiles + +-if { (ac_try="$ac_link_default" ++if { { ac_try="$ac_link_default" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then : + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. + # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' + # in a Makefile. We should not override ac_cv_exeext if it was cached, +@@ -3398,7 +3765,7 @@ + # certainly right. + break;; + *.* ) +- if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; ++ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi +@@ -3417,84 +3784,75 @@ + else + ac_file='' + fi +- +-{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 + $as_echo "$ac_file" >&6; } +-if test -z "$ac_file"; then ++if test -z "$ac_file"; then : + $as_echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 ++{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +-{ { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables +-See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: C compiler cannot create executables +-See \`config.log' for more details." >&2;} +- { (exit 77); exit 77; }; }; } ++{ as_fn_set_status 77 ++as_fn_error "C compiler cannot create executables ++See \`config.log' for more details." "$LINENO" 5; }; } + fi +- + ac_exeext=$ac_cv_exeext + + # Check that the compiler produces executables we can run. If not, either + # the compiler is broken, or we cross compile. +-{ $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 + $as_echo_n "checking whether the C compiler works... " >&6; } +-# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 + # If not cross compiling, check that we can run a simple program. + if test "$cross_compiling" != yes; then + if { ac_try='./$ac_file' +- { (case "(($ac_try" in ++ { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else +- { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +-{ { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs. +-If you meant to cross compile, use \`--host'. +-See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: cannot run C compiled programs. ++as_fn_error "cannot run C compiled programs. + If you meant to cross compile, use \`--host'. +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; }; } ++See \`config.log' for more details." "$LINENO" 5; } + fi + fi + fi +-{ $as_echo "$as_me:$LINENO: result: yes" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + +-rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ++rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out conftest.out + ac_clean_files=$ac_clean_files_save + # Check that the compiler produces executables we can run. If not, either + # the compiler is broken, or we cross compile. +-{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 + $as_echo_n "checking whether we are cross compiling... " >&6; } +-{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 + $as_echo "$cross_compiling" >&6; } + +-{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 + $as_echo_n "checking for suffix of executables... " >&6; } +-if { (ac_try="$ac_link" ++if { { ac_try="$ac_link" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then : + # If both `conftest.exe' and `conftest' are `present' (well, observable) + # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will + # work properly (i.e., refer to `conftest.exe'), while it won't with +@@ -3509,32 +3867,24 @@ + esac + done + else +- { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +-{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link +-See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; }; } ++as_fn_error "cannot compute suffix of executables: cannot compile and link ++See \`config.log' for more details." "$LINENO" 5; } + fi +- + rm -f conftest$ac_cv_exeext +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 + $as_echo "$ac_cv_exeext" >&6; } + + rm -f conftest.$ac_ext + EXEEXT=$ac_cv_exeext + ac_exeext=$EXEEXT +-{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 + $as_echo_n "checking for suffix of object files... " >&6; } +-if test "${ac_cv_objext+set}" = set; then ++if test "${ac_cv_objext+set}" = set; then : + $as_echo_n "(cached) " >&6 + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -3546,17 +3896,17 @@ + } + _ACEOF + rm -f conftest.o conftest.obj +-if { (ac_try="$ac_compile" ++if { { ac_try="$ac_compile" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then : + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in +@@ -3569,31 +3919,23 @@ + $as_echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 ++{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +-{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile +-See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; }; } ++as_fn_error "cannot compute suffix of object files: cannot compile ++See \`config.log' for more details." "$LINENO" 5; } + fi +- + rm -f conftest.$ac_cv_objext conftest.$ac_ext + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 + $as_echo "$ac_cv_objext" >&6; } + OBJEXT=$ac_cv_objext + ac_objext=$OBJEXT +-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 + $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +-if test "${ac_cv_c_compiler_gnu+set}" = set; then ++if test "${ac_cv_c_compiler_gnu+set}" = set; then : + $as_echo_n "(cached) " >&6 + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -3607,37 +3949,16 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then ++if ac_fn_c_try_compile "$LINENO"; then : + ac_compiler_gnu=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_compiler_gnu=no ++ ac_compiler_gnu=no + fi +- + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cv_c_compiler_gnu=$ac_compiler_gnu + + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 + $as_echo "$ac_cv_c_compiler_gnu" >&6; } + if test $ac_compiler_gnu = yes; then + GCC=yes +@@ -3646,20 +3967,16 @@ + fi + ac_test_CFLAGS=${CFLAGS+set} + ac_save_CFLAGS=$CFLAGS +-{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 + $as_echo_n "checking whether $CC accepts -g... " >&6; } +-if test "${ac_cv_prog_cc_g+set}" = set; then ++if test "${ac_cv_prog_cc_g+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -3670,35 +3987,11 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then ++if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- CFLAGS="" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ CFLAGS="" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -3709,36 +4002,12 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- : +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++if ac_fn_c_try_compile "$LINENO"; then : + +- ac_c_werror_flag=$ac_save_c_werror_flag ++else ++ ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -3749,42 +4018,17 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then ++if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- + fi +- + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +- + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +- + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 + $as_echo "$ac_cv_prog_cc_g" >&6; } + if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +@@ -3801,18 +4045,14 @@ + CFLAGS= + fi + fi +-{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 + $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +-if test "${ac_cv_prog_cc_c89+set}" = set; then ++if test "${ac_cv_prog_cc_c89+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + ac_cv_prog_cc_c89=no + ac_save_CC=$CC +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + #include + #include +@@ -3869,32 +4109,9 @@ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" + do + CC="$ac_save_CC $ac_arg" +- rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then ++ if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- + fi +- + rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break + done +@@ -3905,17 +4122,19 @@ + # AC_CACHE_VAL + case "x$ac_cv_prog_cc_c89" in + x) +- { $as_echo "$as_me:$LINENO: result: none needed" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 + $as_echo "none needed" >&6; } ;; + xno) +- { $as_echo "$as_me:$LINENO: result: unsupported" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 + $as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" +- { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 + $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; + esac ++if test "x$ac_cv_prog_cc_c89" != xno; then : + ++fi + + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' +@@ -3925,9 +4144,9 @@ + + depcc="$CC" am_compiler_list= + +-{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 + $as_echo_n "checking dependency style of $depcc... " >&6; } +-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then ++if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then +@@ -3953,6 +4172,11 @@ + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi ++ am__universal=false ++ case " $depcc " in #( ++ *\ -arch\ *\ -arch\ *) am__universal=true ;; ++ esac ++ + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and +@@ -3970,7 +4194,17 @@ + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + ++ # We check with `-c' and `-o' for the sake of the "dashmstdout" ++ # mode. It turns out that the SunPro C++ compiler does not properly ++ # handle `-M -o', and we need to detect this. Also, some Intel ++ # versions had trouble with output in subdirs ++ am__obj=sub/conftest.${OBJEXT-o} ++ am__minus_obj="-o $am__obj" + case $depmode in ++ gcc) ++ # This depmode causes a compiler race in universal mode. ++ test "$am__universal" = false || continue ++ ;; + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested +@@ -3980,19 +4214,23 @@ + break + fi + ;; ++ msvisualcpp | msvcmsys) ++ # This compiler won't grok `-c -o', but also, the minuso test has ++ # not run yet. These depmodes are late enough in the game, and ++ # so weak that their functioning should not be impacted. ++ am__obj=conftest.${OBJEXT-o} ++ am__minus_obj= ++ ;; + none) break ;; + esac +- # We check with `-c' and `-o' for the sake of the "dashmstdout" +- # mode. It turns out that the SunPro C++ compiler does not properly +- # handle `-M -o', and we need to detect this. + if depmode=$depmode \ +- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ ++ source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ +- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ ++ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && +- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ++ grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message +@@ -4016,7 +4254,7 @@ + fi + + fi +-{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 + $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } + CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + +@@ -4036,35 +4274,31 @@ + + case "$am__api_version" in + 1.01234) +- { { $as_echo "$as_me:$LINENO: error: Automake 1.5 or newer is required to use intltool" >&5 +-$as_echo "$as_me: error: Automake 1.5 or newer is required to use intltool" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "Automake 1.5 or newer is required to use intltool" "$LINENO" 5 + ;; + *) + ;; + esac + + if test -n "0.35.0"; then +- { $as_echo "$as_me:$LINENO: checking for intltool >= 0.35.0" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for intltool >= 0.35.0" >&5 + $as_echo_n "checking for intltool >= 0.35.0... " >&6; } + + INTLTOOL_REQUIRED_VERSION_AS_INT=`echo 0.35.0 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` + INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3` + INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` + +- { $as_echo "$as_me:$LINENO: result: $INTLTOOL_APPLIED_VERSION found" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_APPLIED_VERSION found" >&5 + $as_echo "$INTLTOOL_APPLIED_VERSION found" >&6; } + test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || +- { { $as_echo "$as_me:$LINENO: error: Your intltool is too old. You need intltool 0.35.0 or later." >&5 +-$as_echo "$as_me: error: Your intltool is too old. You need intltool 0.35.0 or later." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "Your intltool is too old. You need intltool 0.35.0 or later." "$LINENO" 5 + fi + + # Extract the first word of "intltool-update", so it can be a program name with args. + set dummy intltool-update; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_INTLTOOL_UPDATE+set}" = set; then ++if test "${ac_cv_path_INTLTOOL_UPDATE+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + case $INTLTOOL_UPDATE in +@@ -4077,14 +4311,14 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_INTLTOOL_UPDATE="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + ;; +@@ -4092,19 +4326,19 @@ + fi + INTLTOOL_UPDATE=$ac_cv_path_INTLTOOL_UPDATE + if test -n "$INTLTOOL_UPDATE"; then +- { $as_echo "$as_me:$LINENO: result: $INTLTOOL_UPDATE" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_UPDATE" >&5 + $as_echo "$INTLTOOL_UPDATE" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + + + # Extract the first word of "intltool-merge", so it can be a program name with args. + set dummy intltool-merge; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_INTLTOOL_MERGE+set}" = set; then ++if test "${ac_cv_path_INTLTOOL_MERGE+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + case $INTLTOOL_MERGE in +@@ -4117,14 +4351,14 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_INTLTOOL_MERGE="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + ;; +@@ -4132,19 +4366,19 @@ + fi + INTLTOOL_MERGE=$ac_cv_path_INTLTOOL_MERGE + if test -n "$INTLTOOL_MERGE"; then +- { $as_echo "$as_me:$LINENO: result: $INTLTOOL_MERGE" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_MERGE" >&5 + $as_echo "$INTLTOOL_MERGE" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + + + # Extract the first word of "intltool-extract", so it can be a program name with args. + set dummy intltool-extract; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_INTLTOOL_EXTRACT+set}" = set; then ++if test "${ac_cv_path_INTLTOOL_EXTRACT+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + case $INTLTOOL_EXTRACT in +@@ -4157,14 +4391,14 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_INTLTOOL_EXTRACT="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + ;; +@@ -4172,18 +4406,16 @@ + fi + INTLTOOL_EXTRACT=$ac_cv_path_INTLTOOL_EXTRACT + if test -n "$INTLTOOL_EXTRACT"; then +- { $as_echo "$as_me:$LINENO: result: $INTLTOOL_EXTRACT" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_EXTRACT" >&5 + $as_echo "$INTLTOOL_EXTRACT" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + + + if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then +- { { $as_echo "$as_me:$LINENO: error: The intltool scripts were not found. Please install intltool." >&5 +-$as_echo "$as_me: error: The intltool scripts were not found. Please install intltool." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "The intltool scripts were not found. Please install intltool." "$LINENO" 5 + fi + + INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' +@@ -4305,9 +4537,9 @@ + # Check the gettext tools to make sure they are GNU + # Extract the first word of "xgettext", so it can be a program name with args. + set dummy xgettext; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_XGETTEXT+set}" = set; then ++if test "${ac_cv_path_XGETTEXT+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + case $XGETTEXT in +@@ -4320,14 +4552,14 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_XGETTEXT="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + ;; +@@ -4335,19 +4567,19 @@ + fi + XGETTEXT=$ac_cv_path_XGETTEXT + if test -n "$XGETTEXT"; then +- { $as_echo "$as_me:$LINENO: result: $XGETTEXT" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5 + $as_echo "$XGETTEXT" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + + + # Extract the first word of "msgmerge", so it can be a program name with args. + set dummy msgmerge; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_MSGMERGE+set}" = set; then ++if test "${ac_cv_path_MSGMERGE+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + case $MSGMERGE in +@@ -4360,14 +4592,14 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_MSGMERGE="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + ;; +@@ -4375,19 +4607,19 @@ + fi + MSGMERGE=$ac_cv_path_MSGMERGE + if test -n "$MSGMERGE"; then +- { $as_echo "$as_me:$LINENO: result: $MSGMERGE" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5 + $as_echo "$MSGMERGE" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + + + # Extract the first word of "msgfmt", so it can be a program name with args. + set dummy msgfmt; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_MSGFMT+set}" = set; then ++if test "${ac_cv_path_MSGFMT+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + case $MSGFMT in +@@ -4400,14 +4632,14 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_MSGFMT="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + ;; +@@ -4415,19 +4647,19 @@ + fi + MSGFMT=$ac_cv_path_MSGFMT + if test -n "$MSGFMT"; then +- { $as_echo "$as_me:$LINENO: result: $MSGFMT" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5 + $as_echo "$MSGFMT" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + + + # Extract the first word of "gmsgfmt", so it can be a program name with args. + set dummy gmsgfmt; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_GMSGFMT+set}" = set; then ++if test "${ac_cv_path_GMSGFMT+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + case $GMSGFMT in +@@ -4440,14 +4672,14 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" +@@ -4456,33 +4688,29 @@ + fi + GMSGFMT=$ac_cv_path_GMSGFMT + if test -n "$GMSGFMT"; then +- { $as_echo "$as_me:$LINENO: result: $GMSGFMT" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5 + $as_echo "$GMSGFMT" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + + + if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then +- { { $as_echo "$as_me:$LINENO: error: GNU gettext tools not found; required for intltool" >&5 +-$as_echo "$as_me: error: GNU gettext tools not found; required for intltool" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "GNU gettext tools not found; required for intltool" "$LINENO" 5 + fi + xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" + mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" + mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" + if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then +- { { $as_echo "$as_me:$LINENO: error: GNU gettext tools not found; required for intltool" >&5 +-$as_echo "$as_me: error: GNU gettext tools not found; required for intltool" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "GNU gettext tools not found; required for intltool" "$LINENO" 5 + fi + + # Extract the first word of "perl", so it can be a program name with args. + set dummy perl; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_INTLTOOL_PERL+set}" = set; then ++if test "${ac_cv_path_INTLTOOL_PERL+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + case $INTLTOOL_PERL in +@@ -4495,14 +4723,14 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_INTLTOOL_PERL="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + ;; +@@ -4510,41 +4738,35 @@ + fi + INTLTOOL_PERL=$ac_cv_path_INTLTOOL_PERL + if test -n "$INTLTOOL_PERL"; then +- { $as_echo "$as_me:$LINENO: result: $INTLTOOL_PERL" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_PERL" >&5 + $as_echo "$INTLTOOL_PERL" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + + + if test -z "$INTLTOOL_PERL"; then +- { { $as_echo "$as_me:$LINENO: error: perl not found" >&5 +-$as_echo "$as_me: error: perl not found" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "perl not found" "$LINENO" 5 + fi +-{ $as_echo "$as_me:$LINENO: checking for perl >= 5.8.1" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for perl >= 5.8.1" >&5 + $as_echo_n "checking for perl >= 5.8.1... " >&6; } + $INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1 + if test $? -ne 0; then +- { { $as_echo "$as_me:$LINENO: error: perl 5.8.1 is required for intltool" >&5 +-$as_echo "$as_me: error: perl 5.8.1 is required for intltool" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "perl 5.8.1 is required for intltool" "$LINENO" 5 + else + IT_PERL_VERSION="`$INTLTOOL_PERL -e \"printf '%vd', $^V\"`" +- { $as_echo "$as_me:$LINENO: result: $IT_PERL_VERSION" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $IT_PERL_VERSION" >&5 + $as_echo "$IT_PERL_VERSION" >&6; } + fi + if test "x" != "xno-xml"; then +- { $as_echo "$as_me:$LINENO: checking for XML::Parser" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XML::Parser" >&5 + $as_echo_n "checking for XML::Parser... " >&6; } + if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then +- { $as_echo "$as_me:$LINENO: result: ok" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 + $as_echo "ok" >&6; } + else +- { { $as_echo "$as_me:$LINENO: error: XML::Parser perl module is required for intltool" >&5 +-$as_echo "$as_me: error: XML::Parser perl module is required for intltool" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "XML::Parser perl module is required for intltool" "$LINENO" 5 + fi + fi + +@@ -4554,11 +4776,7 @@ + # Set DATADIRNAME correctly if it is not set yet + # (copied from glib-gettext.m4) + if test -z "$DATADIRNAME"; then +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -4570,120 +4788,13 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + DATADIRNAME=share + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- case $host in ++ case $host in + *-*-solaris*) +- { $as_echo "$as_me:$LINENO: checking for bind_textdomain_codeset" >&5 +-$as_echo_n "checking for bind_textdomain_codeset... " >&6; } +-if test "${ac_cv_func_bind_textdomain_codeset+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define bind_textdomain_codeset to an innocuous variant, in case declares bind_textdomain_codeset. +- For example, HP-UX 11i declares gettimeofday. */ +-#define bind_textdomain_codeset innocuous_bind_textdomain_codeset +- +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char bind_textdomain_codeset (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ +- +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif +- +-#undef bind_textdomain_codeset +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char bind_textdomain_codeset (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_bind_textdomain_codeset || defined __stub___bind_textdomain_codeset +-choke me +-#endif +- +-int +-main () +-{ +-return bind_textdomain_codeset (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_func_bind_textdomain_codeset=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_func_bind_textdomain_codeset=no +-fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_bind_textdomain_codeset" >&5 +-$as_echo "$ac_cv_func_bind_textdomain_codeset" >&6; } +-if test "x$ac_cv_func_bind_textdomain_codeset" = x""yes; then ++ ac_fn_c_check_func "$LINENO" "bind_textdomain_codeset" "ac_cv_func_bind_textdomain_codeset" ++if test "x$ac_cv_func_bind_textdomain_codeset" = x""yes; then : + DATADIRNAME=share + else + DATADIRNAME=lib +@@ -4695,10 +4806,8 @@ + ;; + esac + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + fi + + +@@ -4711,9 +4820,9 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. + set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_PKG_CONFIG+set}" = set; then ++if test "${ac_cv_path_PKG_CONFIG+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + case $PKG_CONFIG in +@@ -4726,14 +4835,14 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + ;; +@@ -4741,10 +4850,10 @@ + fi + PKG_CONFIG=$ac_cv_path_PKG_CONFIG + if test -n "$PKG_CONFIG"; then +- { $as_echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 + $as_echo "$PKG_CONFIG" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -4754,9 +4863,9 @@ + ac_pt_PKG_CONFIG=$PKG_CONFIG + # Extract the first word of "pkg-config", so it can be a program name with args. + set dummy pkg-config; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then ++if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + case $ac_pt_PKG_CONFIG in +@@ -4769,14 +4878,14 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + ;; +@@ -4784,10 +4893,10 @@ + fi + ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG + if test -n "$ac_pt_PKG_CONFIG"; then +- { $as_echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 + $as_echo "$ac_pt_PKG_CONFIG" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -4796,7 +4905,7 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 + $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} + ac_tool_warned=yes ;; + esac +@@ -4809,13 +4918,13 @@ + fi + if test -n "$PKG_CONFIG"; then + _pkg_min_version=0.19 +- { $as_echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 + $as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } + if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then +- { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + PKG_CONFIG="" + fi +@@ -4830,9 +4939,9 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. + set dummy ${ac_tool_prefix}gcc; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_CC+set}" = set; then ++if test "${ac_cv_prog_CC+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$CC"; then +@@ -4843,24 +4952,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- { $as_echo "$as_me:$LINENO: result: $CC" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 + $as_echo "$CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -4870,9 +4979,9 @@ + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. + set dummy gcc; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then ++if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$ac_ct_CC"; then +@@ -4883,24 +4992,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="gcc" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 + $as_echo "$ac_ct_CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -4909,7 +5018,7 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 + $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} + ac_tool_warned=yes ;; + esac +@@ -4923,9 +5032,9 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. + set dummy ${ac_tool_prefix}cc; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_CC+set}" = set; then ++if test "${ac_cv_prog_CC+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$CC"; then +@@ -4936,24 +5045,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}cc" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- { $as_echo "$as_me:$LINENO: result: $CC" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 + $as_echo "$CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -4963,9 +5072,9 @@ + if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. + set dummy cc; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_CC+set}" = set; then ++if test "${ac_cv_prog_CC+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$CC"; then +@@ -4977,18 +5086,18 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + if test $ac_prog_rejected = yes; then +@@ -5007,10 +5116,10 @@ + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- { $as_echo "$as_me:$LINENO: result: $CC" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 + $as_echo "$CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -5022,9 +5131,9 @@ + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. + set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_CC+set}" = set; then ++if test "${ac_cv_prog_CC+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$CC"; then +@@ -5035,24 +5144,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- { $as_echo "$as_me:$LINENO: result: $CC" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 + $as_echo "$CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -5066,9 +5175,9 @@ + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then ++if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$ac_ct_CC"; then +@@ -5079,24 +5188,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="$ac_prog" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 + $as_echo "$ac_ct_CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -5109,7 +5218,7 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 + $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} + ac_tool_warned=yes ;; + esac +@@ -5120,62 +5229,42 @@ + fi + + +-test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 ++test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +-{ { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +-See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: no acceptable C compiler found in \$PATH +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; }; } ++as_fn_error "no acceptable C compiler found in \$PATH ++See \`config.log' for more details." "$LINENO" 5; } + + # Provide some information about the compiler. +-$as_echo "$as_me:$LINENO: checking for C compiler version" >&5 ++$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 + set X $ac_compile + ac_compiler=$2 +-{ (ac_try="$ac_compiler --version >&5" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compiler --version >&5") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +-{ (ac_try="$ac_compiler -v >&5" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compiler -v >&5") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +-{ (ac_try="$ac_compiler -V >&5" ++for ac_option in --version -v -V -qversion; do ++ { { ac_try="$ac_compiler $ac_option >&5" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compiler -V >&5") 2>&5 ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } ++ if test -s conftest.err; then ++ sed '10a\ ++... rest of stderr output deleted ... ++ 10q' conftest.err >conftest.er1 ++ cat conftest.er1 >&5 ++ rm -f conftest.er1 conftest.err ++ fi ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } ++done + +-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 + $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +-if test "${ac_cv_c_compiler_gnu+set}" = set; then ++if test "${ac_cv_c_compiler_gnu+set}" = set; then : + $as_echo_n "(cached) " >&6 + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -5189,37 +5278,16 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then ++if ac_fn_c_try_compile "$LINENO"; then : + ac_compiler_gnu=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_compiler_gnu=no ++ ac_compiler_gnu=no + fi +- + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cv_c_compiler_gnu=$ac_compiler_gnu + + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 + $as_echo "$ac_cv_c_compiler_gnu" >&6; } + if test $ac_compiler_gnu = yes; then + GCC=yes +@@ -5228,20 +5296,16 @@ + fi + ac_test_CFLAGS=${CFLAGS+set} + ac_save_CFLAGS=$CFLAGS +-{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 + $as_echo_n "checking whether $CC accepts -g... " >&6; } +-if test "${ac_cv_prog_cc_g+set}" = set; then ++if test "${ac_cv_prog_cc_g+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -5252,35 +5316,11 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then ++if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- CFLAGS="" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ CFLAGS="" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -5291,36 +5331,12 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- : +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++if ac_fn_c_try_compile "$LINENO"; then : + +- ac_c_werror_flag=$ac_save_c_werror_flag ++else ++ ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -5331,42 +5347,17 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then ++if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- + fi +- + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +- + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +- + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 + $as_echo "$ac_cv_prog_cc_g" >&6; } + if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +@@ -5383,18 +5374,14 @@ + CFLAGS= + fi + fi +-{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 + $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +-if test "${ac_cv_prog_cc_c89+set}" = set; then ++if test "${ac_cv_prog_cc_c89+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + ac_cv_prog_cc_c89=no + ac_save_CC=$CC +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + #include + #include +@@ -5451,32 +5438,9 @@ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" + do + CC="$ac_save_CC $ac_arg" +- rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then ++ if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- + fi +- + rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break + done +@@ -5487,17 +5451,19 @@ + # AC_CACHE_VAL + case "x$ac_cv_prog_cc_c89" in + x) +- { $as_echo "$as_me:$LINENO: result: none needed" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 + $as_echo "none needed" >&6; } ;; + xno) +- { $as_echo "$as_me:$LINENO: result: unsupported" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 + $as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" +- { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 + $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; + esac ++if test "x$ac_cv_prog_cc_c89" != xno; then : + ++fi + + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' +@@ -5507,9 +5473,9 @@ + + depcc="$CC" am_compiler_list= + +-{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 + $as_echo_n "checking dependency style of $depcc... " >&6; } +-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then ++if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then +@@ -5535,6 +5501,11 @@ + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi ++ am__universal=false ++ case " $depcc " in #( ++ *\ -arch\ *\ -arch\ *) am__universal=true ;; ++ esac ++ + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and +@@ -5552,7 +5523,17 @@ + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + ++ # We check with `-c' and `-o' for the sake of the "dashmstdout" ++ # mode. It turns out that the SunPro C++ compiler does not properly ++ # handle `-M -o', and we need to detect this. Also, some Intel ++ # versions had trouble with output in subdirs ++ am__obj=sub/conftest.${OBJEXT-o} ++ am__minus_obj="-o $am__obj" + case $depmode in ++ gcc) ++ # This depmode causes a compiler race in universal mode. ++ test "$am__universal" = false || continue ++ ;; + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested +@@ -5562,19 +5543,23 @@ + break + fi + ;; ++ msvisualcpp | msvcmsys) ++ # This compiler won't grok `-c -o', but also, the minuso test has ++ # not run yet. These depmodes are late enough in the game, and ++ # so weak that their functioning should not be impacted. ++ am__obj=conftest.${OBJEXT-o} ++ am__minus_obj= ++ ;; + none) break ;; + esac +- # We check with `-c' and `-o' for the sake of the "dashmstdout" +- # mode. It turns out that the SunPro C++ compiler does not properly +- # handle `-M -o', and we need to detect this. + if depmode=$depmode \ +- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ ++ source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ +- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ ++ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && +- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ++ grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message +@@ -5598,7 +5583,7 @@ + fi + + fi +-{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 + $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } + CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + +@@ -5613,17 +5598,13 @@ + fi + + +-{ $as_echo "$as_me:$LINENO: checking for library containing strerror" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing strerror" >&5 + $as_echo_n "checking for library containing strerror... " >&6; } +-if test "${ac_cv_search_strerror+set}" = set; then ++if test "${ac_cv_search_strerror+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + ac_func_search_save_LIBS=$LIBS +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + /* Override any GCC internal prototype to avoid an error. +@@ -5648,54 +5629,27 @@ + ac_res=-l$ac_lib + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + fi +- rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ if ac_fn_c_try_link "$LINENO"; then : + ac_cv_search_strerror=$ac_res +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext +- if test "${ac_cv_search_strerror+set}" = set; then ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext ++ if test "${ac_cv_search_strerror+set}" = set; then : + break + fi + done +-if test "${ac_cv_search_strerror+set}" = set; then +- : ++if test "${ac_cv_search_strerror+set}" = set; then : ++ + else + ac_cv_search_strerror=no + fi + rm conftest.$ac_ext + LIBS=$ac_func_search_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_search_strerror" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_strerror" >&5 + $as_echo "$ac_cv_search_strerror" >&6; } + ac_res=$ac_cv_search_strerror +-if test "$ac_res" != no; then ++if test "$ac_res" != no; then : + test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" + + fi +@@ -5705,14 +5659,14 @@ + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_c_compiler_gnu +-{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 + $as_echo_n "checking how to run the C preprocessor... " >&6; } + # On Suns, sometimes $CPP names a directory. + if test -n "$CPP" && test -d "$CPP"; then + CPP= + fi + if test -z "$CPP"; then +- if test "${ac_cv_prog_CPP+set}" = set; then ++ if test "${ac_cv_prog_CPP+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + # Double quotes because CPP needs to be expanded +@@ -5727,11 +5681,7 @@ + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + #ifdef __STDC__ + # include +@@ -5740,78 +5690,34 @@ + #endif + Syntax error + _ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || +- test ! -s conftest.err +- }; then +- : +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++if ac_fn_c_try_cpp "$LINENO"; then : + ++else + # Broken: fails on valid input. + continue + fi +- + rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + #include + _ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || +- test ! -s conftest.err +- }; then ++if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. + continue + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- + # Passes both tests. + ac_preproc_ok=: + break + fi +- + rm -f conftest.err conftest.$ac_ext + + done + # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. + rm -f conftest.err conftest.$ac_ext +-if $ac_preproc_ok; then ++if $ac_preproc_ok; then : + break + fi + +@@ -5823,7 +5729,7 @@ + else + ac_cv_prog_CPP=$CPP + fi +-{ $as_echo "$as_me:$LINENO: result: $CPP" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 + $as_echo "$CPP" >&6; } + ac_preproc_ok=false + for ac_c_preproc_warn_flag in '' yes +@@ -5834,11 +5740,7 @@ + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + #ifdef __STDC__ + # include +@@ -5847,87 +5749,40 @@ + #endif + Syntax error + _ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || +- test ! -s conftest.err +- }; then +- : +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++if ac_fn_c_try_cpp "$LINENO"; then : + ++else + # Broken: fails on valid input. + continue + fi +- + rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + #include + _ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || +- test ! -s conftest.err +- }; then ++if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. + continue + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- + # Passes both tests. + ac_preproc_ok=: + break + fi +- + rm -f conftest.err conftest.$ac_ext + + done + # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. + rm -f conftest.err conftest.$ac_ext +-if $ac_preproc_ok; then +- : ++if $ac_preproc_ok; then : ++ + else +- { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +-{ { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check +-See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; }; } ++as_fn_error "C preprocessor \"$CPP\" fails sanity check ++See \`config.log' for more details." "$LINENO" 5; } + fi + + ac_ext=c +@@ -5937,9 +5792,9 @@ + ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +-{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 + $as_echo_n "checking for grep that handles long lines and -e... " >&6; } +-if test "${ac_cv_path_GREP+set}" = set; then ++if test "${ac_cv_path_GREP+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -z "$GREP"; then +@@ -5950,7 +5805,7 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_prog in grep ggrep; do ++ for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue +@@ -5970,7 +5825,7 @@ + $as_echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break +- ac_count=`expr $ac_count + 1` ++ as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" +@@ -5985,26 +5840,24 @@ + $ac_path_GREP_found && break 3 + done + done +-done ++ done + IFS=$as_save_IFS + if test -z "$ac_cv_path_GREP"; then +- { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +-$as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi + else + ac_cv_path_GREP=$GREP + fi + + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 + $as_echo "$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + + +-{ $as_echo "$as_me:$LINENO: checking for egrep" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 + $as_echo_n "checking for egrep... " >&6; } +-if test "${ac_cv_path_EGREP+set}" = set; then ++if test "${ac_cv_path_EGREP+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 +@@ -6018,7 +5871,7 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_prog in egrep; do ++ for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue +@@ -6038,7 +5891,7 @@ + $as_echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break +- ac_count=`expr $ac_count + 1` ++ as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" +@@ -6053,12 +5906,10 @@ + $ac_path_EGREP_found && break 3 + done + done +-done ++ done + IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP"; then +- { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +-$as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi + else + ac_cv_path_EGREP=$EGREP +@@ -6066,21 +5917,17 @@ + + fi + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 + $as_echo "$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + + +-{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 + $as_echo_n "checking for ANSI C header files... " >&6; } +-if test "${ac_cv_header_stdc+set}" = set; then ++if test "${ac_cv_header_stdc+set}" = set; then : + $as_echo_n "(cached) " >&6 + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + #include + #include +@@ -6095,48 +5942,23 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then ++if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_header_stdc=no ++ ac_cv_header_stdc=no + fi +- + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + #include + + _ACEOF + if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- $EGREP "memchr" >/dev/null 2>&1; then +- : ++ $EGREP "memchr" >/dev/null 2>&1; then : ++ + else + ac_cv_header_stdc=no + fi +@@ -6146,18 +5968,14 @@ + + if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + #include + + _ACEOF + if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- $EGREP "free" >/dev/null 2>&1; then +- : ++ $EGREP "free" >/dev/null 2>&1; then : ++ + else + ac_cv_header_stdc=no + fi +@@ -6167,14 +5985,10 @@ + + if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. +- if test "$cross_compiling" = yes; then ++ if test "$cross_compiling" = yes; then : + : + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + #include + #include +@@ -6201,57 +6015,28 @@ + return 0; + } + _ACEOF +-rm -f conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_try") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- : +-else +- $as_echo "$as_me: program exited with status $ac_status" >&5 +-$as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++if ac_fn_c_try_run "$LINENO"; then : + +-( exit $ac_status ) +-ac_cv_header_stdc=no ++else ++ ac_cv_header_stdc=no + fi +-rm -rf conftest.dSYM +-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ ++ conftest.$ac_objext conftest.beam conftest.$ac_ext + fi + +- + fi + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 + $as_echo "$ac_cv_header_stdc" >&6; } + if test $ac_cv_header_stdc = yes; then + +-cat >>confdefs.h <<\_ACEOF +-#define STDC_HEADERS 1 +-_ACEOF ++$as_echo "#define STDC_HEADERS 1" >>confdefs.h + + fi + + case `pwd` in + *\ * | *\ *) +- { $as_echo "$as_me:$LINENO: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 + $as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; + esac + +@@ -6276,35 +6061,27 @@ + + # Make sure we can run config.sub. + $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || +- { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 +-$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 + +-{ $as_echo "$as_me:$LINENO: checking build system type" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 + $as_echo_n "checking build system type... " >&6; } +-if test "${ac_cv_build+set}" = set; then ++if test "${ac_cv_build+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + ac_build_alias=$build_alias + test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` + test "x$ac_build_alias" = x && +- { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 +-$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5 + ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || +- { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 +-$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 + + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 + $as_echo "$ac_cv_build" >&6; } + case $ac_cv_build in + *-*-*) ;; +-*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 +-$as_echo "$as_me: error: invalid value of canonical build" >&2;} +- { (exit 1); exit 1; }; };; ++*) as_fn_error "invalid value of canonical build" "$LINENO" 5;; + esac + build=$ac_cv_build + ac_save_IFS=$IFS; IFS='-' +@@ -6320,28 +6097,24 @@ + case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +-{ $as_echo "$as_me:$LINENO: checking host system type" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 + $as_echo_n "checking host system type... " >&6; } +-if test "${ac_cv_host+set}" = set; then ++if test "${ac_cv_host+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build + else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || +- { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 +-$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 + fi + + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 + $as_echo "$ac_cv_host" >&6; } + case $ac_cv_host in + *-*-*) ;; +-*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 +-$as_echo "$as_me: error: invalid value of canonical host" >&2;} +- { (exit 1); exit 1; }; };; ++*) as_fn_error "invalid value of canonical host" "$LINENO" 5;; + esac + host=$ac_cv_host + ac_save_IFS=$IFS; IFS='-' +@@ -6357,9 +6130,9 @@ + case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + +-{ $as_echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 + $as_echo_n "checking for a sed that does not truncate output... " >&6; } +-if test "${ac_cv_path_SED+set}" = set; then ++if test "${ac_cv_path_SED+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ +@@ -6367,7 +6140,7 @@ + ac_script="$ac_script$as_nl$ac_script" + done + echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed +- $as_unset ac_script || ac_script= ++ { ac_script=; unset ac_script;} + if test -z "$SED"; then + ac_path_SED_found=false + # Loop through the user's path and test for each of PROGNAME-LIST +@@ -6376,7 +6149,7 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_prog in sed gsed; do ++ for ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue +@@ -6396,7 +6169,7 @@ + $as_echo '' >> "conftest.nl" + "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break +- ac_count=`expr $ac_count + 1` ++ as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_SED_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_SED="$ac_path_SED" +@@ -6411,19 +6184,17 @@ + $ac_path_SED_found && break 3 + done + done +-done ++ done + IFS=$as_save_IFS + if test -z "$ac_cv_path_SED"; then +- { { $as_echo "$as_me:$LINENO: error: no acceptable sed could be found in \$PATH" >&5 +-$as_echo "$as_me: error: no acceptable sed could be found in \$PATH" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "no acceptable sed could be found in \$PATH" "$LINENO" 5 + fi + else + ac_cv_path_SED=$SED + fi + + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 + $as_echo "$ac_cv_path_SED" >&6; } + SED="$ac_cv_path_SED" + rm -f conftest.sed +@@ -6441,9 +6212,9 @@ + + + +-{ $as_echo "$as_me:$LINENO: checking for fgrep" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 + $as_echo_n "checking for fgrep... " >&6; } +-if test "${ac_cv_path_FGREP+set}" = set; then ++if test "${ac_cv_path_FGREP+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 +@@ -6457,7 +6228,7 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_prog in fgrep; do ++ for ac_prog in fgrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue +@@ -6477,7 +6248,7 @@ + $as_echo 'FGREP' >> "conftest.nl" + "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break +- ac_count=`expr $ac_count + 1` ++ as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_FGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_FGREP="$ac_path_FGREP" +@@ -6492,12 +6263,10 @@ + $ac_path_FGREP_found && break 3 + done + done +-done ++ done + IFS=$as_save_IFS + if test -z "$ac_cv_path_FGREP"; then +- { { $as_echo "$as_me:$LINENO: error: no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +-$as_echo "$as_me: error: no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi + else + ac_cv_path_FGREP=$FGREP +@@ -6505,7 +6274,7 @@ + + fi + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 + $as_echo "$ac_cv_path_FGREP" >&6; } + FGREP="$ac_cv_path_FGREP" + +@@ -6531,7 +6300,7 @@ + + + # Check whether --with-gnu-ld was given. +-if test "${with_gnu_ld+set}" = set; then ++if test "${with_gnu_ld+set}" = set; then : + withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes + else + with_gnu_ld=no +@@ -6540,7 +6309,7 @@ + ac_prog=ld + if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. +- { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 + $as_echo_n "checking for ld used by $CC... " >&6; } + case $host in + *-*-mingw*) +@@ -6570,13 +6339,13 @@ + ;; + esac + elif test "$with_gnu_ld" = yes; then +- { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 + $as_echo_n "checking for GNU ld... " >&6; } + else +- { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 + $as_echo_n "checking for non-GNU ld... " >&6; } + fi +-if test "${lt_cv_path_LD+set}" = set; then ++if test "${lt_cv_path_LD+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -z "$LD"; then +@@ -6607,18 +6376,16 @@ + + LD="$lt_cv_path_LD" + if test -n "$LD"; then +- { $as_echo "$as_me:$LINENO: result: $LD" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5 + $as_echo "$LD" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi +-test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 +-$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} +- { (exit 1); exit 1; }; } +-{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 ++test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 + $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } +-if test "${lt_cv_prog_gnu_ld+set}" = set; then ++if test "${lt_cv_prog_gnu_ld+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + # I'd rather use --version here, but apparently some GNU lds only accept -v. +@@ -6631,7 +6398,7 @@ + ;; + esac + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5 + $as_echo "$lt_cv_prog_gnu_ld" >&6; } + with_gnu_ld=$lt_cv_prog_gnu_ld + +@@ -6643,9 +6410,9 @@ + + + +-{ $as_echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 + $as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } +-if test "${lt_cv_path_NM+set}" = set; then ++if test "${lt_cv_path_NM+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$NM"; then +@@ -6692,7 +6459,7 @@ + : ${lt_cv_path_NM=no} + fi + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 + $as_echo "$lt_cv_path_NM" >&6; } + if test "$lt_cv_path_NM" != "no"; then + NM="$lt_cv_path_NM" +@@ -6703,9 +6470,9 @@ + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. + set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_DUMPBIN+set}" = set; then ++if test "${ac_cv_prog_DUMPBIN+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$DUMPBIN"; then +@@ -6716,24 +6483,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + DUMPBIN=$ac_cv_prog_DUMPBIN + if test -n "$DUMPBIN"; then +- { $as_echo "$as_me:$LINENO: result: $DUMPBIN" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 + $as_echo "$DUMPBIN" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -6747,9 +6514,9 @@ + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then ++if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$ac_ct_DUMPBIN"; then +@@ -6760,24 +6527,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN + if test -n "$ac_ct_DUMPBIN"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 + $as_echo "$ac_ct_DUMPBIN" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -6790,7 +6557,7 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 + $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} + ac_tool_warned=yes ;; + esac +@@ -6810,44 +6577,44 @@ + + + +-{ $as_echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 + $as_echo_n "checking the name lister ($NM) interface... " >&6; } +-if test "${lt_cv_nm_interface+set}" = set; then ++if test "${lt_cv_nm_interface+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext +- (eval echo "\"\$as_me:6820: $ac_compile\"" >&5) ++ (eval echo "\"\$as_me:6587: $ac_compile\"" >&5) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&5 +- (eval echo "\"\$as_me:6823: $NM \\\"conftest.$ac_objext\\\"\"" >&5) ++ (eval echo "\"\$as_me:6590: $NM \\\"conftest.$ac_objext\\\"\"" >&5) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&5 +- (eval echo "\"\$as_me:6826: output\"" >&5) ++ (eval echo "\"\$as_me:6593: output\"" >&5) + cat conftest.out >&5 + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest* + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 + $as_echo "$lt_cv_nm_interface" >&6; } + +-{ $as_echo "$as_me:$LINENO: checking whether ln -s works" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 + $as_echo_n "checking whether ln -s works... " >&6; } + LN_S=$as_ln_s + if test "$LN_S" = "ln -s"; then +- { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no, using $LN_S" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 + $as_echo "no, using $LN_S" >&6; } + fi + + # find the maximum length of command line arguments +-{ $as_echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 + $as_echo_n "checking the maximum length of command line arguments... " >&6; } +-if test "${lt_cv_sys_max_cmd_len+set}" = set; then ++if test "${lt_cv_sys_max_cmd_len+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + i=0 +@@ -6965,10 +6732,10 @@ + fi + + if test -n $lt_cv_sys_max_cmd_len ; then +- { $as_echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 + $as_echo "$lt_cv_sys_max_cmd_len" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: none" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 + $as_echo "none" >&6; } + fi + max_cmd_len=$lt_cv_sys_max_cmd_len +@@ -6982,7 +6749,7 @@ + : ${MV="mv -f"} + : ${RM="rm -f"} + +-{ $as_echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 + $as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } + # Try some XSI features + xsi_shell=no +@@ -6992,17 +6759,17 @@ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +-{ $as_echo "$as_me:$LINENO: result: $xsi_shell" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 + $as_echo "$xsi_shell" >&6; } + + +-{ $as_echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 + $as_echo_n "checking whether the shell understands \"+=\"... " >&6; } + lt_shell_append=no + ( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ + >/dev/null 2>&1 \ + && lt_shell_append=yes +-{ $as_echo "$as_me:$LINENO: result: $lt_shell_append" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 + $as_echo "$lt_shell_append" >&6; } + + +@@ -7037,14 +6804,14 @@ + + + +-{ $as_echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 + $as_echo_n "checking for $LD option to reload object files... " >&6; } +-if test "${lt_cv_ld_reload_flag+set}" = set; then ++if test "${lt_cv_ld_reload_flag+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + lt_cv_ld_reload_flag='-r' + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 + $as_echo "$lt_cv_ld_reload_flag" >&6; } + reload_flag=$lt_cv_ld_reload_flag + case $reload_flag in +@@ -7073,9 +6840,9 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. + set dummy ${ac_tool_prefix}objdump; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_OBJDUMP+set}" = set; then ++if test "${ac_cv_prog_OBJDUMP+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$OBJDUMP"; then +@@ -7086,24 +6853,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + OBJDUMP=$ac_cv_prog_OBJDUMP + if test -n "$OBJDUMP"; then +- { $as_echo "$as_me:$LINENO: result: $OBJDUMP" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 + $as_echo "$OBJDUMP" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -7113,9 +6880,9 @@ + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. + set dummy objdump; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then ++if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$ac_ct_OBJDUMP"; then +@@ -7126,24 +6893,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP + if test -n "$ac_ct_OBJDUMP"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 + $as_echo "$ac_ct_OBJDUMP" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -7152,7 +6919,7 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 + $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} + ac_tool_warned=yes ;; + esac +@@ -7172,9 +6939,9 @@ + + + +-{ $as_echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 + $as_echo_n "checking how to recognize dependent libraries... " >&6; } +-if test "${lt_cv_deplibs_check_method+set}" = set; then ++if test "${lt_cv_deplibs_check_method+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + lt_cv_file_magic_cmd='$MAGIC_CMD' +@@ -7368,7 +7135,7 @@ + esac + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 + $as_echo "$lt_cv_deplibs_check_method" >&6; } + file_magic_cmd=$lt_cv_file_magic_cmd + deplibs_check_method=$lt_cv_deplibs_check_method +@@ -7388,9 +7155,9 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. + set dummy ${ac_tool_prefix}ar; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_AR+set}" = set; then ++if test "${ac_cv_prog_AR+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$AR"; then +@@ -7401,24 +7168,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AR="${ac_tool_prefix}ar" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + AR=$ac_cv_prog_AR + if test -n "$AR"; then +- { $as_echo "$as_me:$LINENO: result: $AR" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 + $as_echo "$AR" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -7428,9 +7195,9 @@ + ac_ct_AR=$AR + # Extract the first word of "ar", so it can be a program name with args. + set dummy ar; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_ac_ct_AR+set}" = set; then ++if test "${ac_cv_prog_ac_ct_AR+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$ac_ct_AR"; then +@@ -7441,24 +7208,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_AR="ar" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + ac_ct_AR=$ac_cv_prog_ac_ct_AR + if test -n "$ac_ct_AR"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 + $as_echo "$ac_ct_AR" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -7467,7 +7234,7 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 + $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} + ac_tool_warned=yes ;; + esac +@@ -7493,9 +7260,9 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. + set dummy ${ac_tool_prefix}strip; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_STRIP+set}" = set; then ++if test "${ac_cv_prog_STRIP+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$STRIP"; then +@@ -7506,24 +7273,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + STRIP=$ac_cv_prog_STRIP + if test -n "$STRIP"; then +- { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 + $as_echo "$STRIP" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -7533,9 +7300,9 @@ + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. + set dummy strip; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then ++if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$ac_ct_STRIP"; then +@@ -7546,24 +7313,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP + if test -n "$ac_ct_STRIP"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 + $as_echo "$ac_ct_STRIP" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -7572,7 +7339,7 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 + $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} + ac_tool_warned=yes ;; + esac +@@ -7592,9 +7359,9 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. + set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_RANLIB+set}" = set; then ++if test "${ac_cv_prog_RANLIB+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$RANLIB"; then +@@ -7605,24 +7372,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + RANLIB=$ac_cv_prog_RANLIB + if test -n "$RANLIB"; then +- { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 + $as_echo "$RANLIB" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -7632,9 +7399,9 @@ + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. + set dummy ranlib; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then ++if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$ac_ct_RANLIB"; then +@@ -7645,24 +7412,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_RANLIB="ranlib" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB + if test -n "$ac_ct_RANLIB"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 + $as_echo "$ac_ct_RANLIB" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -7671,7 +7438,7 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 + $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} + ac_tool_warned=yes ;; + esac +@@ -7749,9 +7516,9 @@ + + + # Check for command to grab the raw symbol name followed by C symbol from nm. +-{ $as_echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 + $as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } +-if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then ++if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + +@@ -7867,18 +7634,18 @@ + int main(){nm_test_var='a';nm_test_func();return(0);} + _LT_EOF + +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + # Now try to grab the symbols. + nlist=conftest.nm +- if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 ++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\""; } >&5 + (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && test -s "$nlist"; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" +@@ -7931,11 +7698,11 @@ + lt_save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" +- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && test -s conftest${ac_exeext}; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS="$lt_save_LIBS" +@@ -7969,10 +7736,10 @@ + lt_cv_sys_global_symbol_to_cdecl= + fi + if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then +- { $as_echo "$as_me:$LINENO: result: failed" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 + $as_echo "failed" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: ok" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 + $as_echo "ok" >&6; } + fi + +@@ -7998,7 +7765,7 @@ + + + # Check whether --enable-libtool-lock was given. +-if test "${enable_libtool_lock+set}" = set; then ++if test "${enable_libtool_lock+set}" = set; then : + enableval=$enable_libtool_lock; + fi + +@@ -8010,11 +7777,11 @@ + ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" +@@ -8028,12 +7795,12 @@ + ;; + *-*-irix6*) + # Find out which ABI we are using. +- echo '#line 8031 "configure"' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ echo '#line 7798 "configure"' > conftest.$ac_ext ++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) +@@ -8067,11 +7834,11 @@ + s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in +@@ -8120,9 +7887,9 @@ + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" +- { $as_echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 + $as_echo_n "checking whether the C compiler needs -belf... " >&6; } +-if test "${lt_cv_cc_needs_belf+set}" = set; then ++if test "${lt_cv_cc_needs_belf+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + ac_ext=c +@@ -8131,11 +7898,7 @@ + ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_c_compiler_gnu + +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -8146,38 +7909,13 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + lt_cv_cc_needs_belf=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- lt_cv_cc_needs_belf=no ++else ++ lt_cv_cc_needs_belf=no + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +@@ -8185,7 +7923,7 @@ + ac_compiler_gnu=$ac_cv_c_compiler_gnu + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 + $as_echo "$lt_cv_cc_needs_belf" >&6; } + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf +@@ -8195,11 +7933,11 @@ + sparc*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in +@@ -8225,9 +7963,9 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. + set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_DSYMUTIL+set}" = set; then ++if test "${ac_cv_prog_DSYMUTIL+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$DSYMUTIL"; then +@@ -8238,24 +7976,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + DSYMUTIL=$ac_cv_prog_DSYMUTIL + if test -n "$DSYMUTIL"; then +- { $as_echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 + $as_echo "$DSYMUTIL" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -8265,9 +8003,9 @@ + ac_ct_DSYMUTIL=$DSYMUTIL + # Extract the first word of "dsymutil", so it can be a program name with args. + set dummy dsymutil; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then ++if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$ac_ct_DSYMUTIL"; then +@@ -8278,24 +8016,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL + if test -n "$ac_ct_DSYMUTIL"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 + $as_echo "$ac_ct_DSYMUTIL" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -8304,7 +8042,7 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 + $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} + ac_tool_warned=yes ;; + esac +@@ -8317,9 +8055,9 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. + set dummy ${ac_tool_prefix}nmedit; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_NMEDIT+set}" = set; then ++if test "${ac_cv_prog_NMEDIT+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$NMEDIT"; then +@@ -8330,24 +8068,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + NMEDIT=$ac_cv_prog_NMEDIT + if test -n "$NMEDIT"; then +- { $as_echo "$as_me:$LINENO: result: $NMEDIT" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 + $as_echo "$NMEDIT" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -8357,9 +8095,9 @@ + ac_ct_NMEDIT=$NMEDIT + # Extract the first word of "nmedit", so it can be a program name with args. + set dummy nmedit; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then ++if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$ac_ct_NMEDIT"; then +@@ -8370,24 +8108,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_NMEDIT="nmedit" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT + if test -n "$ac_ct_NMEDIT"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 + $as_echo "$ac_ct_NMEDIT" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -8396,7 +8134,7 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 + $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} + ac_tool_warned=yes ;; + esac +@@ -8409,9 +8147,9 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. + set dummy ${ac_tool_prefix}lipo; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_LIPO+set}" = set; then ++if test "${ac_cv_prog_LIPO+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$LIPO"; then +@@ -8422,24 +8160,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_LIPO="${ac_tool_prefix}lipo" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + LIPO=$ac_cv_prog_LIPO + if test -n "$LIPO"; then +- { $as_echo "$as_me:$LINENO: result: $LIPO" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 + $as_echo "$LIPO" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -8449,9 +8187,9 @@ + ac_ct_LIPO=$LIPO + # Extract the first word of "lipo", so it can be a program name with args. + set dummy lipo; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then ++if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$ac_ct_LIPO"; then +@@ -8462,24 +8200,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_LIPO="lipo" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO + if test -n "$ac_ct_LIPO"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 + $as_echo "$ac_ct_LIPO" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -8488,7 +8226,7 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 + $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} + ac_tool_warned=yes ;; + esac +@@ -8501,9 +8239,9 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. + set dummy ${ac_tool_prefix}otool; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_OTOOL+set}" = set; then ++if test "${ac_cv_prog_OTOOL+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$OTOOL"; then +@@ -8514,24 +8252,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_OTOOL="${ac_tool_prefix}otool" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + OTOOL=$ac_cv_prog_OTOOL + if test -n "$OTOOL"; then +- { $as_echo "$as_me:$LINENO: result: $OTOOL" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 + $as_echo "$OTOOL" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -8541,9 +8279,9 @@ + ac_ct_OTOOL=$OTOOL + # Extract the first word of "otool", so it can be a program name with args. + set dummy otool; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then ++if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$ac_ct_OTOOL"; then +@@ -8554,24 +8292,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_OTOOL="otool" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL + if test -n "$ac_ct_OTOOL"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 + $as_echo "$ac_ct_OTOOL" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -8580,7 +8318,7 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 + $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} + ac_tool_warned=yes ;; + esac +@@ -8593,9 +8331,9 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. + set dummy ${ac_tool_prefix}otool64; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_OTOOL64+set}" = set; then ++if test "${ac_cv_prog_OTOOL64+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$OTOOL64"; then +@@ -8606,24 +8344,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + OTOOL64=$ac_cv_prog_OTOOL64 + if test -n "$OTOOL64"; then +- { $as_echo "$as_me:$LINENO: result: $OTOOL64" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 + $as_echo "$OTOOL64" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -8633,9 +8371,9 @@ + ac_ct_OTOOL64=$OTOOL64 + # Extract the first word of "otool64", so it can be a program name with args. + set dummy otool64; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then ++if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$ac_ct_OTOOL64"; then +@@ -8646,24 +8384,24 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_OTOOL64="otool64" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 + if test -n "$ac_ct_OTOOL64"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 + $as_echo "$ac_ct_OTOOL64" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -8672,7 +8410,7 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 + $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} + ac_tool_warned=yes ;; + esac +@@ -8708,9 +8446,9 @@ + + + +- { $as_echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 + $as_echo_n "checking for -single_module linker flag... " >&6; } +-if test "${lt_cv_apple_cc_single_mod+set}" = set; then ++if test "${lt_cv_apple_cc_single_mod+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + lt_cv_apple_cc_single_mod=no +@@ -8735,22 +8473,18 @@ + rm -f conftest.* + fi + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 + $as_echo "$lt_cv_apple_cc_single_mod" >&6; } +- { $as_echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 + $as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } +-if test "${lt_cv_ld_exported_symbols_list+set}" = set; then ++if test "${lt_cv_ld_exported_symbols_list+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -8761,42 +8495,17 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + lt_cv_ld_exported_symbols_list=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- lt_cv_ld_exported_symbols_list=no ++ lt_cv_ld_exported_symbols_list=no + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 + $as_echo "$lt_cv_ld_exported_symbols_list" >&6; } + case $host_os in + rhapsody* | darwin1.[012]) +@@ -8834,69 +8543,14 @@ + esac + + # On IRIX 5.3, sys/types and inttypes.h are conflicting. +- +- +- +- +- +- +- +- +- + for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +-do +-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +-$as_echo_n "checking for $ac_header... " >&6; } +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_includes_default +- +-#include <$ac_header> +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- eval "$as_ac_Header=yes" +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- eval "$as_ac_Header=no" +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-fi +-ac_res=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } +-as_val=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- if test "x$as_val" = x""yes; then ++do : ++ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ++ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default ++" ++eval as_val=\$$as_ac_Header ++ if test "x$as_val" = x""yes; then : + cat >>confdefs.h <<_ACEOF + #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 + _ACEOF +@@ -8906,62 +8560,13 @@ + done + + +- + for ac_header in dlfcn.h +-do +-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +-$as_echo_n "checking for $ac_header... " >&6; } +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_includes_default +- +-#include <$ac_header> +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- eval "$as_ac_Header=yes" +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- eval "$as_ac_Header=no" +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-fi +-ac_res=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } +-as_val=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- if test "x$as_val" = x""yes; then ++do : ++ ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default ++" ++if test "x$ac_cv_header_dlfcn_h" = x""yes; then : + cat >>confdefs.h <<_ACEOF +-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++#define HAVE_DLFCN_H 1 + _ACEOF + + fi +@@ -8981,7 +8586,7 @@ + + + # Check whether --enable-shared was given. +-if test "${enable_shared+set}" = set; then ++if test "${enable_shared+set}" = set; then : + enableval=$enable_shared; p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; +@@ -9012,7 +8617,7 @@ + + + # Check whether --enable-static was given. +-if test "${enable_static+set}" = set; then ++if test "${enable_static+set}" = set; then : + enableval=$enable_static; p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; +@@ -9044,7 +8649,7 @@ + + + # Check whether --with-pic was given. +-if test "${with_pic+set}" = set; then ++if test "${with_pic+set}" = set; then : + withval=$with_pic; pic_mode="$withval" + else + pic_mode=default +@@ -9060,7 +8665,7 @@ + + + # Check whether --enable-fast-install was given. +-if test "${enable_fast_install+set}" = set; then ++if test "${enable_fast_install+set}" = set; then : + enableval=$enable_fast_install; p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; +@@ -9141,9 +8746,9 @@ + setopt NO_GLOB_SUBST + fi + +-{ $as_echo "$as_me:$LINENO: checking for objdir" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 + $as_echo_n "checking for objdir... " >&6; } +-if test "${lt_cv_objdir+set}" = set; then ++if test "${lt_cv_objdir+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + rm -f .libs 2>/dev/null +@@ -9156,7 +8761,7 @@ + fi + rmdir .libs 2>/dev/null + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 + $as_echo "$lt_cv_objdir" >&6; } + objdir=$lt_cv_objdir + +@@ -9249,9 +8854,9 @@ + case $deplibs_check_method in + file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then +- { $as_echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 + $as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } +-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then ++if test "${lt_cv_path_MAGIC_CMD+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + case $MAGIC_CMD in +@@ -9302,10 +8907,10 @@ + + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if test -n "$MAGIC_CMD"; then +- { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 + $as_echo "$MAGIC_CMD" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -9315,9 +8920,9 @@ + + if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then +- { $as_echo "$as_me:$LINENO: checking for file" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 + $as_echo_n "checking for file... " >&6; } +-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then ++if test "${lt_cv_path_MAGIC_CMD+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + case $MAGIC_CMD in +@@ -9368,10 +8973,10 @@ + + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if test -n "$MAGIC_CMD"; then +- { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 + $as_echo "$MAGIC_CMD" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -9452,9 +9057,9 @@ + if test "$GCC" = yes; then + lt_prog_compiler_no_builtin_flag=' -fno-builtin' + +- { $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 + $as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } +-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then ++if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + lt_cv_prog_compiler_rtti_exceptions=no +@@ -9470,11 +9075,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:9473: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:9078: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 +- echo "$as_me:9477: \$? = $ac_status" >&5 ++ echo "$as_me:9082: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. +@@ -9487,7 +9092,7 @@ + $RM conftest* + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 + $as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } + + if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then +@@ -9507,7 +9112,7 @@ + lt_prog_compiler_pic= + lt_prog_compiler_static= + +-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 + $as_echo_n "checking for $compiler option to produce PIC... " >&6; } + + if test "$GCC" = yes; then +@@ -9779,7 +9384,7 @@ + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; + esac +-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5 + $as_echo "$lt_prog_compiler_pic" >&6; } + + +@@ -9791,9 +9396,9 @@ + # Check to make sure the PIC flag actually works. + # + if test -n "$lt_prog_compiler_pic"; then +- { $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 + $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } +-if test "${lt_cv_prog_compiler_pic_works+set}" = set; then ++if test "${lt_cv_prog_compiler_pic_works+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + lt_cv_prog_compiler_pic_works=no +@@ -9809,11 +9414,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:9812: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:9417: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 +- echo "$as_me:9816: \$? = $ac_status" >&5 ++ echo "$as_me:9421: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. +@@ -9826,7 +9431,7 @@ + $RM conftest* + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 + $as_echo "$lt_cv_prog_compiler_pic_works" >&6; } + + if test x"$lt_cv_prog_compiler_pic_works" = xyes; then +@@ -9850,9 +9455,9 @@ + # Check to make sure the static flag actually works. + # + wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" +-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 + $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +-if test "${lt_cv_prog_compiler_static_works+set}" = set; then ++if test "${lt_cv_prog_compiler_static_works+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + lt_cv_prog_compiler_static_works=no +@@ -9878,7 +9483,7 @@ + LDFLAGS="$save_LDFLAGS" + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 + $as_echo "$lt_cv_prog_compiler_static_works" >&6; } + + if test x"$lt_cv_prog_compiler_static_works" = xyes; then +@@ -9893,9 +9498,9 @@ + + + +- { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 + $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +-if test "${lt_cv_prog_compiler_c_o+set}" = set; then ++if test "${lt_cv_prog_compiler_c_o+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + lt_cv_prog_compiler_c_o=no +@@ -9914,11 +9519,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:9917: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:9522: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 +- echo "$as_me:9921: \$? = $ac_status" >&5 ++ echo "$as_me:9526: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized +@@ -9940,7 +9545,7 @@ + $RM conftest* + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 + $as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + +@@ -9948,9 +9553,9 @@ + + + +- { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 + $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +-if test "${lt_cv_prog_compiler_c_o+set}" = set; then ++if test "${lt_cv_prog_compiler_c_o+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + lt_cv_prog_compiler_c_o=no +@@ -9969,11 +9574,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:9972: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:9577: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 +- echo "$as_me:9976: \$? = $ac_status" >&5 ++ echo "$as_me:9581: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized +@@ -9995,7 +9600,7 @@ + $RM conftest* + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 + $as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + +@@ -10004,7 +9609,7 @@ + hard_links="nottested" + if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user +- { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 + $as_echo_n "checking if we can lock with hard links... " >&6; } + hard_links=yes + $RM conftest* +@@ -10012,10 +9617,10 @@ + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no +- { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 + $as_echo "$hard_links" >&6; } + if test "$hard_links" = no; then +- { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 + $as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +@@ -10028,7 +9633,7 @@ + + + +- { $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 + $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + + runpath_var= +@@ -10471,11 +10076,7 @@ + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -10486,27 +10087,7 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { +@@ -10520,16 +10101,9 @@ + if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" +@@ -10542,11 +10116,7 @@ + else + # Determine the default libpath from the value encoded in an + # empty executable. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -10557,27 +10127,7 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { +@@ -10591,16 +10141,9 @@ + if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" +@@ -10812,42 +10355,16 @@ + # implicitly export all symbols. + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" +- cat >conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + int foo(void) {} + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' +@@ -11103,7 +10620,7 @@ + fi + fi + +-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 + $as_echo "$ld_shlibs" >&6; } + test "$ld_shlibs" = no && can_build_shared=no + +@@ -11140,16 +10657,16 @@ + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. +- { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 + $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } 2>conftest.err; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext +@@ -11163,11 +10680,11 @@ + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= +- if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 ++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } + then + archive_cmds_need_lc=no + else +@@ -11178,7 +10695,7 @@ + cat conftest.err 1>&5 + fi + $RM conftest* +- { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc" >&5 + $as_echo "$archive_cmds_need_lc" >&6; } + ;; + esac +@@ -11342,7 +10859,7 @@ + + + +- { $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 + $as_echo_n "checking dynamic linker characteristics... " >&6; } + + if test "$GCC" = yes; then +@@ -11764,11 +11281,7 @@ + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -11779,41 +11292,13 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then ++if ac_fn_c_try_link "$LINENO"; then : ++ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : + shlibpath_overrides_runpath=yes + fi +- +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + +@@ -12037,7 +11522,7 @@ + dynamic_linker=no + ;; + esac +-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 + $as_echo "$dynamic_linker" >&6; } + test "$dynamic_linker" = no && can_build_shared=no + +@@ -12139,7 +11624,7 @@ + + + +- { $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 + $as_echo_n "checking how to hardcode library paths into programs... " >&6; } + hardcode_action= + if test -n "$hardcode_libdir_flag_spec" || +@@ -12164,7 +11649,7 @@ + # directories. + hardcode_action=unsupported + fi +-{ $as_echo "$as_me:$LINENO: result: $hardcode_action" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 + $as_echo "$hardcode_action" >&6; } + + if test "$hardcode_action" = relink || +@@ -12208,112 +11693,16 @@ + ;; + + darwin*) +- # if libdl is installed we need to link against it +- { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +-$as_echo_n "checking for dlopen in -ldl... " >&6; } +-if test "${ac_cv_lib_dl_dlopen+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldl $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char dlopen (); +-int +-main () +-{ +-return dlopen (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_lib_dl_dlopen=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_dl_dlopen=no +-fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +-$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +-if test "x$ac_cv_lib_dl_dlopen" = x""yes; then +- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +-else +- +- lt_cv_dlopen="dyld" +- lt_cv_dlopen_libs= +- lt_cv_dlopen_self=yes +- +-fi +- +- ;; +- +- *) +- { $as_echo "$as_me:$LINENO: checking for shl_load" >&5 +-$as_echo_n "checking for shl_load... " >&6; } +-if test "${ac_cv_func_shl_load+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define shl_load to an innocuous variant, in case declares shl_load. +- For example, HP-UX 11i declares gettimeofday. */ +-#define shl_load innocuous_shl_load +- +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char shl_load (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ +- +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif +- +-#undef shl_load ++ # if libdl is installed we need to link against it ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 ++$as_echo_n "checking for dlopen in -ldl... " >&6; } ++if test "${ac_cv_lib_dl_dlopen+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldl $LIBS" ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + + /* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC +@@ -12321,72 +11710,51 @@ + #ifdef __cplusplus + extern "C" + #endif +-char shl_load (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_shl_load || defined __stub___shl_load +-choke me +-#endif +- ++char dlopen (); + int + main () + { +-return shl_load (); ++return dlopen (); + ; + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_func_shl_load=yes ++if ac_fn_c_try_link "$LINENO"; then : ++ ac_cv_lib_dl_dlopen=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_func_shl_load=no ++ ac_cv_lib_dl_dlopen=no + fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 ++$as_echo "$ac_cv_lib_dl_dlopen" >&6; } ++if test "x$ac_cv_lib_dl_dlopen" = x""yes; then : ++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" ++else ++ ++ lt_cv_dlopen="dyld" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 +-$as_echo "$ac_cv_func_shl_load" >&6; } +-if test "x$ac_cv_func_shl_load" = x""yes; then ++ ++ ;; ++ ++ *) ++ ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" ++if test "x$ac_cv_func_shl_load" = x""yes; then : + lt_cv_dlopen="shl_load" + else +- { $as_echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 + $as_echo_n "checking for shl_load in -ldld... " >&6; } +-if test "${ac_cv_lib_dld_shl_load+set}" = set; then ++if test "${ac_cv_lib_dld_shl_load+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-ldld $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + /* Override any GCC internal prototype to avoid an error. +@@ -12404,145 +11772,32 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_shl_load=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_dld_shl_load=no ++ ac_cv_lib_dld_shl_load=no + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 + $as_echo "$ac_cv_lib_dld_shl_load" >&6; } +-if test "x$ac_cv_lib_dld_shl_load" = x""yes; then ++if test "x$ac_cv_lib_dld_shl_load" = x""yes; then : + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" + else +- { $as_echo "$as_me:$LINENO: checking for dlopen" >&5 +-$as_echo_n "checking for dlopen... " >&6; } +-if test "${ac_cv_func_dlopen+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define dlopen to an innocuous variant, in case declares dlopen. +- For example, HP-UX 11i declares gettimeofday. */ +-#define dlopen innocuous_dlopen +- +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char dlopen (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ +- +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif +- +-#undef dlopen +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char dlopen (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_dlopen || defined __stub___dlopen +-choke me +-#endif +- +-int +-main () +-{ +-return dlopen (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_func_dlopen=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_func_dlopen=no +-fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 +-$as_echo "$ac_cv_func_dlopen" >&6; } +-if test "x$ac_cv_func_dlopen" = x""yes; then ++ ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" ++if test "x$ac_cv_func_dlopen" = x""yes; then : + lt_cv_dlopen="dlopen" + else +- { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 + $as_echo_n "checking for dlopen in -ldl... " >&6; } +-if test "${ac_cv_lib_dl_dlopen+set}" = set; then ++if test "${ac_cv_lib_dl_dlopen+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-ldl $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + /* Override any GCC internal prototype to avoid an error. +@@ -12560,57 +11815,28 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_dl_dlopen=no ++ ac_cv_lib_dl_dlopen=no + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 + $as_echo "$ac_cv_lib_dl_dlopen" >&6; } +-if test "x$ac_cv_lib_dl_dlopen" = x""yes; then ++if test "x$ac_cv_lib_dl_dlopen" = x""yes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" + else +- { $as_echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 + $as_echo_n "checking for dlopen in -lsvld... " >&6; } +-if test "${ac_cv_lib_svld_dlopen+set}" = set; then ++if test "${ac_cv_lib_svld_dlopen+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lsvld $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + /* Override any GCC internal prototype to avoid an error. +@@ -12628,57 +11854,28 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_svld_dlopen=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_svld_dlopen=no ++ ac_cv_lib_svld_dlopen=no + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 + $as_echo "$ac_cv_lib_svld_dlopen" >&6; } +-if test "x$ac_cv_lib_svld_dlopen" = x""yes; then ++if test "x$ac_cv_lib_svld_dlopen" = x""yes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" + else +- { $as_echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 + $as_echo_n "checking for dld_link in -ldld... " >&6; } +-if test "${ac_cv_lib_dld_dld_link+set}" = set; then ++if test "${ac_cv_lib_dld_dld_link+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-ldld $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + /* Override any GCC internal prototype to avoid an error. +@@ -12696,43 +11893,18 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_dld_link=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_dld_dld_link=no ++ ac_cv_lib_dld_dld_link=no + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 + $as_echo "$ac_cv_lib_dld_dld_link" >&6; } +-if test "x$ac_cv_lib_dld_dld_link" = x""yes; then ++if test "x$ac_cv_lib_dld_dld_link" = x""yes; then : + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" + fi + +@@ -12771,9 +11943,9 @@ + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + +- { $as_echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 + $as_echo_n "checking whether a program can dlopen itself... " >&6; } +-if test "${lt_cv_dlopen_self+set}" = set; then ++if test "${lt_cv_dlopen_self+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test "$cross_compiling" = yes; then : +@@ -12782,7 +11954,7 @@ + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +-#line 12785 "configure" ++#line 11957 "configure" + #include "confdefs.h" + + #if HAVE_DLFCN_H +@@ -12841,11 +12013,11 @@ + return status; + } + _LT_EOF +- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in +@@ -12862,14 +12034,14 @@ + + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 + $as_echo "$lt_cv_dlopen_self" >&6; } + + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" +- { $as_echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 + $as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } +-if test "${lt_cv_dlopen_self_static+set}" = set; then ++if test "${lt_cv_dlopen_self_static+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test "$cross_compiling" = yes; then : +@@ -12878,7 +12050,7 @@ + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +-#line 12881 "configure" ++#line 12053 "configure" + #include "confdefs.h" + + #if HAVE_DLFCN_H +@@ -12937,11 +12109,11 @@ + return status; + } + _LT_EOF +- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in +@@ -12958,7 +12130,7 @@ + + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 + $as_echo "$lt_cv_dlopen_self_static" >&6; } + fi + +@@ -12997,12 +12169,12 @@ + + striplib= + old_striplib= +-{ $as_echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 + $as_echo_n "checking whether stripping libraries is possible... " >&6; } + if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" +- { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + else + # FIXME - insert some real tests, host_os isn't really good enough +@@ -13011,15 +12183,15 @@ + if test -n "$STRIP" ; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" +- { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + ;; + *) +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + ;; + esac +@@ -13037,12 +12209,12 @@ + + + # Report which library types will actually be built +- { $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 + $as_echo_n "checking if libtool supports shared libraries... " >&6; } +- { $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 + $as_echo "$can_build_shared" >&6; } + +- { $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 + $as_echo_n "checking whether to build shared libraries... " >&6; } + test "$can_build_shared" = "no" && enable_shared=no + +@@ -13063,14 +12235,14 @@ + fi + ;; + esac +- { $as_echo "$as_me:$LINENO: result: $enable_shared" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 + $as_echo "$enable_shared" >&6; } + +- { $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 + $as_echo_n "checking whether to build static libraries... " >&6; } + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes +- { $as_echo "$as_me:$LINENO: result: $enable_static" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 + $as_echo "$enable_static" >&6; } + + +@@ -13105,12 +12277,12 @@ + # Only expand once: + + +-{ $as_echo "$as_me:$LINENO: checking for X" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for X" >&5 + $as_echo_n "checking for X... " >&6; } + + + # Check whether --with-x was given. +-if test "${with_x+set}" = set; then ++if test "${with_x+set}" = set; then : + withval=$with_x; + fi + +@@ -13120,10 +12292,8 @@ + have_x=disabled + else + case $x_includes,$x_libraries in #( +- *\'*) { { $as_echo "$as_me:$LINENO: error: cannot use X directory names containing '" >&5 +-$as_echo "$as_me: error: cannot use X directory names containing '" >&2;} +- { (exit 1); exit 1; }; };; #( +- *,NONE | NONE,*) if test "${ac_cv_have_x+set}" = set; then ++ *\'*) as_fn_error "cannot use X directory names containing '" "$LINENO" 5;; #( ++ *,NONE | NONE,*) if test "${ac_cv_have_x+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + # One or both of the vars are not set, and there is no cached value. +@@ -13171,21 +12341,25 @@ + # Check X11 before X11Rn because it is often a symlink to the current release. + ac_x_header_dirs=' + /usr/X11/include ++/usr/X11R7/include + /usr/X11R6/include + /usr/X11R5/include + /usr/X11R4/include + + /usr/include/X11 ++/usr/include/X11R7 + /usr/include/X11R6 + /usr/include/X11R5 + /usr/include/X11R4 + + /usr/local/X11/include ++/usr/local/X11R7/include + /usr/local/X11R6/include + /usr/local/X11R5/include + /usr/local/X11R4/include + + /usr/local/include/X11 ++/usr/local/include/X11R7 + /usr/local/include/X11R6 + /usr/local/include/X11R5 + /usr/local/include/X11R4 +@@ -13207,37 +12381,14 @@ + if test "$ac_x_includes" = no; then + # Guess where to find include files, by looking for Xlib.h. + # First, try using that file with no special directory specified. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + #include + _ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || +- test ! -s conftest.err +- }; then ++if ac_fn_c_try_cpp "$LINENO"; then : + # We can compile using X headers with no special include directory. + ac_x_includes= + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- + for ac_dir in $ac_x_header_dirs; do + if test -r "$ac_dir/X11/Xlib.h"; then + ac_x_includes=$ac_dir +@@ -13245,7 +12396,6 @@ + fi + done + fi +- + rm -f conftest.err conftest.$ac_ext + fi # $ac_x_includes = no + +@@ -13255,11 +12405,7 @@ + # Don't add to $LIBS permanently. + ac_save_LIBS=$LIBS + LIBS="-lX11 $LIBS" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + #include + int +@@ -13270,35 +12416,12 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + LIBS=$ac_save_LIBS + # We can link X programs with no special library path. + ac_x_libraries= + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- LIBS=$ac_save_LIBS ++ LIBS=$ac_save_LIBS + for ac_dir in `$as_echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g` + do + # Don't even attempt the hair of trying to link an X program! +@@ -13310,10 +12433,8 @@ + done + done + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + fi # $ac_x_libraries = no + + case $ac_x_includes,$ac_x_libraries in #( +@@ -13334,7 +12455,7 @@ + fi # $with_x != no + + if test "$have_x" != yes; then +- { $as_echo "$as_me:$LINENO: result: $have_x" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_x" >&5 + $as_echo "$have_x" >&6; } + no_x=yes + else +@@ -13345,16 +12466,14 @@ + ac_cv_have_x="have_x=yes\ + ac_x_includes='$x_includes'\ + ac_x_libraries='$x_libraries'" +- { $as_echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: libraries $x_libraries, headers $x_includes" >&5 + $as_echo "libraries $x_libraries, headers $x_includes" >&6; } + fi + + if test "$no_x" = yes; then + # Not all programs may use this symbol, but it does not hurt to define it. + +-cat >>confdefs.h <<\_ACEOF +-#define X_DISPLAY_MISSING 1 +-_ACEOF ++$as_echo "#define X_DISPLAY_MISSING 1" >>confdefs.h + + X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS= + else +@@ -13367,16 +12486,12 @@ + X_LIBS="$X_LIBS -L$x_libraries" + # For Solaris; some versions of Sun CC require a space after -R and + # others require no space. Words are not sufficient . . . . +- { $as_echo "$as_me:$LINENO: checking whether -R must be followed by a space" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -R must be followed by a space" >&5 + $as_echo_n "checking whether -R must be followed by a space... " >&6; } + ac_xsave_LIBS=$LIBS; LIBS="$LIBS -R$x_libraries" + ac_xsave_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -13387,40 +12502,13 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++if ac_fn_c_try_link "$LINENO"; then : ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + X_LIBS="$X_LIBS -R$x_libraries" + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- LIBS="$ac_xsave_LIBS -R $x_libraries" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ LIBS="$ac_xsave_LIBS -R $x_libraries" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -13431,46 +12519,19 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- { $as_echo "$as_me:$LINENO: result: yes" >&5 ++if ac_fn_c_try_link "$LINENO"; then : ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + X_LIBS="$X_LIBS -R $x_libraries" + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- { $as_echo "$as_me:$LINENO: result: neither works" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: neither works" >&5 + $as_echo "neither works" >&6; } + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + ac_c_werror_flag=$ac_xsave_c_werror_flag + LIBS=$ac_xsave_LIBS + fi +@@ -13486,66 +12547,35 @@ + # libraries were built with DECnet support. And Karl Berry says + # the Alpha needs dnet_stub (dnet does not exist). + ac_xsave_LIBS="$LIBS"; LIBS="$LIBS $X_LIBS -lX11" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + /* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char XOpenDisplay (); +-int +-main () +-{ +-return XOpenDisplay (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- : +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++#ifdef __cplusplus ++extern "C" ++#endif ++char XOpenDisplay (); ++int ++main () ++{ ++return XOpenDisplay (); ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_link "$LINENO"; then : + +- { $as_echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet" >&5 ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dnet_ntoa in -ldnet" >&5 + $as_echo_n "checking for dnet_ntoa in -ldnet... " >&6; } +-if test "${ac_cv_lib_dnet_dnet_ntoa+set}" = set; then ++if test "${ac_cv_lib_dnet_dnet_ntoa+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-ldnet $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + /* Override any GCC internal prototype to avoid an error. +@@ -13563,59 +12593,30 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dnet_dnet_ntoa=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_dnet_dnet_ntoa=no ++ ac_cv_lib_dnet_dnet_ntoa=no + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_dnet_ntoa" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dnet_dnet_ntoa" >&5 + $as_echo "$ac_cv_lib_dnet_dnet_ntoa" >&6; } +-if test "x$ac_cv_lib_dnet_dnet_ntoa" = x""yes; then ++if test "x$ac_cv_lib_dnet_dnet_ntoa" = x""yes; then : + X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet" + fi + + if test $ac_cv_lib_dnet_dnet_ntoa = no; then +- { $as_echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet_stub" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dnet_ntoa in -ldnet_stub" >&5 + $as_echo_n "checking for dnet_ntoa in -ldnet_stub... " >&6; } +-if test "${ac_cv_lib_dnet_stub_dnet_ntoa+set}" = set; then ++if test "${ac_cv_lib_dnet_stub_dnet_ntoa+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-ldnet_stub $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + /* Override any GCC internal prototype to avoid an error. +@@ -13633,52 +12634,25 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dnet_stub_dnet_ntoa=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_dnet_stub_dnet_ntoa=no ++ ac_cv_lib_dnet_stub_dnet_ntoa=no + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5 + $as_echo "$ac_cv_lib_dnet_stub_dnet_ntoa" >&6; } +-if test "x$ac_cv_lib_dnet_stub_dnet_ntoa" = x""yes; then ++if test "x$ac_cv_lib_dnet_stub_dnet_ntoa" = x""yes; then : + X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub" + fi + + fi + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + LIBS="$ac_xsave_LIBS" + + # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT, +@@ -13689,105 +12663,20 @@ + # on Irix 5.2, according to T.E. Dickey. + # The functions gethostbyname, getservbyname, and inet_addr are + # in -lbsd on LynxOS 3.0.1/i386, according to Lars Hecking. +- { $as_echo "$as_me:$LINENO: checking for gethostbyname" >&5 +-$as_echo_n "checking for gethostbyname... " >&6; } +-if test "${ac_cv_func_gethostbyname+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define gethostbyname to an innocuous variant, in case declares gethostbyname. +- For example, HP-UX 11i declares gettimeofday. */ +-#define gethostbyname innocuous_gethostbyname +- +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char gethostbyname (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ +- +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif +- +-#undef gethostbyname +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char gethostbyname (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_gethostbyname || defined __stub___gethostbyname +-choke me +-#endif +- +-int +-main () +-{ +-return gethostbyname (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_func_gethostbyname=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_func_gethostbyname=no +-fi ++ ac_fn_c_check_func "$LINENO" "gethostbyname" "ac_cv_func_gethostbyname" ++if test "x$ac_cv_func_gethostbyname" = x""yes; then : + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5 +-$as_echo "$ac_cv_func_gethostbyname" >&6; } + + if test $ac_cv_func_gethostbyname = no; then +- { $as_echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gethostbyname in -lnsl" >&5 + $as_echo_n "checking for gethostbyname in -lnsl... " >&6; } +-if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then ++if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lnsl $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + /* Override any GCC internal prototype to avoid an error. +@@ -13805,59 +12694,30 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_nsl_gethostbyname=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_nsl_gethostbyname=no ++ ac_cv_lib_nsl_gethostbyname=no + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_nsl_gethostbyname" >&5 + $as_echo "$ac_cv_lib_nsl_gethostbyname" >&6; } +-if test "x$ac_cv_lib_nsl_gethostbyname" = x""yes; then ++if test "x$ac_cv_lib_nsl_gethostbyname" = x""yes; then : + X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl" + fi + + if test $ac_cv_lib_nsl_gethostbyname = no; then +- { $as_echo "$as_me:$LINENO: checking for gethostbyname in -lbsd" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gethostbyname in -lbsd" >&5 + $as_echo_n "checking for gethostbyname in -lbsd... " >&6; } +-if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then ++if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lbsd $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + /* Override any GCC internal prototype to avoid an error. +@@ -13875,43 +12735,18 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_bsd_gethostbyname=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_bsd_gethostbyname=no ++ ac_cv_lib_bsd_gethostbyname=no + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_gethostbyname" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_bsd_gethostbyname" >&5 + $as_echo "$ac_cv_lib_bsd_gethostbyname" >&6; } +-if test "x$ac_cv_lib_bsd_gethostbyname" = x""yes; then ++if test "x$ac_cv_lib_bsd_gethostbyname" = x""yes; then : + X_EXTRA_LIBS="$X_EXTRA_LIBS -lbsd" + fi + +@@ -13925,105 +12760,20 @@ + # variants that don't use the name server (or something). -lsocket + # must be given before -lnsl if both are needed. We assume that + # if connect needs -lnsl, so does gethostbyname. +- { $as_echo "$as_me:$LINENO: checking for connect" >&5 +-$as_echo_n "checking for connect... " >&6; } +-if test "${ac_cv_func_connect+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define connect to an innocuous variant, in case declares connect. +- For example, HP-UX 11i declares gettimeofday. */ +-#define connect innocuous_connect +- +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char connect (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ +- +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif +- +-#undef connect +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char connect (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_connect || defined __stub___connect +-choke me +-#endif +- +-int +-main () +-{ +-return connect (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_func_connect=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ ac_fn_c_check_func "$LINENO" "connect" "ac_cv_func_connect" ++if test "x$ac_cv_func_connect" = x""yes; then : + +- ac_cv_func_connect=no + fi + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5 +-$as_echo "$ac_cv_func_connect" >&6; } +- + if test $ac_cv_func_connect = no; then +- { $as_echo "$as_me:$LINENO: checking for connect in -lsocket" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for connect in -lsocket" >&5 + $as_echo_n "checking for connect in -lsocket... " >&6; } +-if test "${ac_cv_lib_socket_connect+set}" = set; then ++if test "${ac_cv_lib_socket_connect+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lsocket $X_EXTRA_LIBS $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + /* Override any GCC internal prototype to avoid an error. +@@ -14041,148 +12791,38 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_socket_connect=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_socket_connect=no ++ ac_cv_lib_socket_connect=no + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_socket_connect" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_socket_connect" >&5 + $as_echo "$ac_cv_lib_socket_connect" >&6; } +-if test "x$ac_cv_lib_socket_connect" = x""yes; then ++if test "x$ac_cv_lib_socket_connect" = x""yes; then : + X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS" + fi + + fi + + # Guillermo Gomez says -lposix is necessary on A/UX. +- { $as_echo "$as_me:$LINENO: checking for remove" >&5 +-$as_echo_n "checking for remove... " >&6; } +-if test "${ac_cv_func_remove+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define remove to an innocuous variant, in case declares remove. +- For example, HP-UX 11i declares gettimeofday. */ +-#define remove innocuous_remove +- +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char remove (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ +- +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif +- +-#undef remove +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char remove (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_remove || defined __stub___remove +-choke me +-#endif +- +-int +-main () +-{ +-return remove (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_func_remove=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_func_remove=no +-fi ++ ac_fn_c_check_func "$LINENO" "remove" "ac_cv_func_remove" ++if test "x$ac_cv_func_remove" = x""yes; then : + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_remove" >&5 +-$as_echo "$ac_cv_func_remove" >&6; } + + if test $ac_cv_func_remove = no; then +- { $as_echo "$as_me:$LINENO: checking for remove in -lposix" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for remove in -lposix" >&5 + $as_echo_n "checking for remove in -lposix... " >&6; } +-if test "${ac_cv_lib_posix_remove+set}" = set; then ++if test "${ac_cv_lib_posix_remove+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lposix $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + /* Override any GCC internal prototype to avoid an error. +@@ -14200,148 +12840,38 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_posix_remove=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_posix_remove=no ++ ac_cv_lib_posix_remove=no + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_posix_remove" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_posix_remove" >&5 + $as_echo "$ac_cv_lib_posix_remove" >&6; } +-if test "x$ac_cv_lib_posix_remove" = x""yes; then ++if test "x$ac_cv_lib_posix_remove" = x""yes; then : + X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix" + fi + + fi + + # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. +- { $as_echo "$as_me:$LINENO: checking for shmat" >&5 +-$as_echo_n "checking for shmat... " >&6; } +-if test "${ac_cv_func_shmat+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define shmat to an innocuous variant, in case declares shmat. +- For example, HP-UX 11i declares gettimeofday. */ +-#define shmat innocuous_shmat +- +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char shmat (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ +- +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif +- +-#undef shmat +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char shmat (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_shmat || defined __stub___shmat +-choke me +-#endif +- +-int +-main () +-{ +-return shmat (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_func_shmat=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ ac_fn_c_check_func "$LINENO" "shmat" "ac_cv_func_shmat" ++if test "x$ac_cv_func_shmat" = x""yes; then : + +- ac_cv_func_shmat=no + fi + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_shmat" >&5 +-$as_echo "$ac_cv_func_shmat" >&6; } +- + if test $ac_cv_func_shmat = no; then +- { $as_echo "$as_me:$LINENO: checking for shmat in -lipc" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shmat in -lipc" >&5 + $as_echo_n "checking for shmat in -lipc... " >&6; } +-if test "${ac_cv_lib_ipc_shmat+set}" = set; then ++if test "${ac_cv_lib_ipc_shmat+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lipc $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + /* Override any GCC internal prototype to avoid an error. +@@ -14359,43 +12889,18 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_ipc_shmat=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_ipc_shmat=no ++ ac_cv_lib_ipc_shmat=no + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_ipc_shmat" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ipc_shmat" >&5 + $as_echo "$ac_cv_lib_ipc_shmat" >&6; } +-if test "x$ac_cv_lib_ipc_shmat" = x""yes; then ++if test "x$ac_cv_lib_ipc_shmat" = x""yes; then : + X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc" + fi + +@@ -14411,18 +12916,14 @@ + # These have to be linked with before -lX11, unlike the other + # libraries we check for below, so use a different variable. + # John Interrante, Karl Berry +- { $as_echo "$as_me:$LINENO: checking for IceConnectionNumber in -lICE" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for IceConnectionNumber in -lICE" >&5 + $as_echo_n "checking for IceConnectionNumber in -lICE... " >&6; } +-if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then ++if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lICE $X_EXTRA_LIBS $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + /* Override any GCC internal prototype to avoid an error. +@@ -14440,43 +12941,18 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_ICE_IceConnectionNumber=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_ICE_IceConnectionNumber=no ++ ac_cv_lib_ICE_IceConnectionNumber=no + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5 + $as_echo "$ac_cv_lib_ICE_IceConnectionNumber" >&6; } +-if test "x$ac_cv_lib_ICE_IceConnectionNumber" = x""yes; then ++if test "x$ac_cv_lib_ICE_IceConnectionNumber" = x""yes; then : + X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE" + fi + +@@ -14490,58 +12966,58 @@ + + if test -n "$PYTHON"; then + # If the user set $PYTHON, use it and don't search something else. +- { $as_echo "$as_me:$LINENO: checking whether $PYTHON version >= 2.4" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $PYTHON version >= 2.4" >&5 + $as_echo_n "checking whether $PYTHON version >= 2.4... " >&6; } +- prog="import sys, string ++ prog="import sys + # split strings by '.' and convert to numeric. Append some zeros + # because we need at least 4 digits for the hex conversion. +-minver = map(int, string.split('2.4', '.')) + [0, 0, 0] ++# map returns an iterator in Python 3.0 and a list in 2.x ++minver = list(map(int, '2.4'.split('.'))) + [0, 0, 0] + minverhex = 0 +-for i in xrange(0, 4): minverhex = (minverhex << 8) + minver[i] ++# xrange is not present in Python 3.0 and range returns an iterator ++for i in list(range(0, 4)): minverhex = (minverhex << 8) + minver[i] + sys.exit(sys.hexversion < minverhex)" + if { echo "$as_me:$LINENO: $PYTHON -c "$prog"" >&5 + ($PYTHON -c "$prog") >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ (exit $ac_status); }; then : ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + else +- { { $as_echo "$as_me:$LINENO: error: too old" >&5 +-$as_echo "$as_me: error: too old" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "too old" "$LINENO" 5 + fi +- + am_display_PYTHON=$PYTHON + else + # Otherwise, try each interpreter until we find one that satisfies + # VERSION. +- { $as_echo "$as_me:$LINENO: checking for a Python interpreter with version >= 2.4" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a Python interpreter with version >= 2.4" >&5 + $as_echo_n "checking for a Python interpreter with version >= 2.4... " >&6; } +-if test "${am_cv_pathless_PYTHON+set}" = set; then ++if test "${am_cv_pathless_PYTHON+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + +- for am_cv_pathless_PYTHON in python python2 python2.5 python2.4 python2.3 python2.2 python2.1 python2.0 python1.6 python1.5 none; do ++ for am_cv_pathless_PYTHON in python python2 python3 python3.0 python2.5 python2.4 python2.3 python2.2 python2.1 python2.0 none; do + test "$am_cv_pathless_PYTHON" = none && break +- prog="import sys, string ++ prog="import sys + # split strings by '.' and convert to numeric. Append some zeros + # because we need at least 4 digits for the hex conversion. +-minver = map(int, string.split('2.4', '.')) + [0, 0, 0] ++# map returns an iterator in Python 3.0 and a list in 2.x ++minver = list(map(int, '2.4'.split('.'))) + [0, 0, 0] + minverhex = 0 +-for i in xrange(0, 4): minverhex = (minverhex << 8) + minver[i] ++# xrange is not present in Python 3.0 and range returns an iterator ++for i in list(range(0, 4)): minverhex = (minverhex << 8) + minver[i] + sys.exit(sys.hexversion < minverhex)" + if { echo "$as_me:$LINENO: $am_cv_pathless_PYTHON -c "$prog"" >&5 + ($am_cv_pathless_PYTHON -c "$prog") >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ (exit $ac_status); }; then : + break + fi +- + done + fi +-{ $as_echo "$as_me:$LINENO: result: $am_cv_pathless_PYTHON" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_pathless_PYTHON" >&5 + $as_echo "$am_cv_pathless_PYTHON" >&6; } + # Set $PYTHON to the absolute path of $am_cv_pathless_PYTHON. + if test "$am_cv_pathless_PYTHON" = none; then +@@ -14549,9 +13025,9 @@ + else + # Extract the first word of "$am_cv_pathless_PYTHON", so it can be a program name with args. + set dummy $am_cv_pathless_PYTHON; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_PYTHON+set}" = set; then ++if test "${ac_cv_path_PYTHON+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + case $PYTHON in +@@ -14564,14 +13040,14 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_PYTHON="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + ;; +@@ -14579,10 +13055,10 @@ + fi + PYTHON=$ac_cv_path_PYTHON + if test -n "$PYTHON"; then +- { $as_echo "$as_me:$LINENO: result: $PYTHON" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PYTHON" >&5 + $as_echo "$PYTHON" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -14593,20 +13069,18 @@ + + + if test "$PYTHON" = :; then +- { { $as_echo "$as_me:$LINENO: error: no suitable Python interpreter found" >&5 +-$as_echo "$as_me: error: no suitable Python interpreter found" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "no suitable Python interpreter found" "$LINENO" 5 + else + + +- { $as_echo "$as_me:$LINENO: checking for $am_display_PYTHON version" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $am_display_PYTHON version" >&5 + $as_echo_n "checking for $am_display_PYTHON version... " >&6; } +-if test "${am_cv_python_version+set}" = set; then ++if test "${am_cv_python_version+set}" = set; then : + $as_echo_n "(cached) " >&6 + else +- am_cv_python_version=`$PYTHON -c "import sys; print sys.version[:3]"` ++ am_cv_python_version=`$PYTHON -c "import sys; sys.stdout.write(sys.version[:3])"` + fi +-{ $as_echo "$as_me:$LINENO: result: $am_cv_python_version" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_python_version" >&5 + $as_echo "$am_cv_python_version" >&6; } + PYTHON_VERSION=$am_cv_python_version + +@@ -14618,23 +13092,23 @@ + + + +- { $as_echo "$as_me:$LINENO: checking for $am_display_PYTHON platform" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $am_display_PYTHON platform" >&5 + $as_echo_n "checking for $am_display_PYTHON platform... " >&6; } +-if test "${am_cv_python_platform+set}" = set; then ++if test "${am_cv_python_platform+set}" = set; then : + $as_echo_n "(cached) " >&6 + else +- am_cv_python_platform=`$PYTHON -c "import sys; print sys.platform"` ++ am_cv_python_platform=`$PYTHON -c "import sys; sys.stdout.write(sys.platform)"` + fi +-{ $as_echo "$as_me:$LINENO: result: $am_cv_python_platform" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_python_platform" >&5 + $as_echo "$am_cv_python_platform" >&6; } + PYTHON_PLATFORM=$am_cv_python_platform + + + + +- { $as_echo "$as_me:$LINENO: checking for $am_display_PYTHON script directory" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $am_display_PYTHON script directory" >&5 + $as_echo_n "checking for $am_display_PYTHON script directory... " >&6; } +-if test "${am_cv_python_pythondir+set}" = set; then ++if test "${am_cv_python_pythondir+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test "x$prefix" = xNONE +@@ -14653,7 +13127,7 @@ + esac + + fi +-{ $as_echo "$as_me:$LINENO: result: $am_cv_python_pythondir" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_python_pythondir" >&5 + $as_echo "$am_cv_python_pythondir" >&6; } + pythondir=$am_cv_python_pythondir + +@@ -14662,9 +13136,9 @@ + pkgpythondir=\${pythondir}/$PACKAGE + + +- { $as_echo "$as_me:$LINENO: checking for $am_display_PYTHON extension module directory" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $am_display_PYTHON extension module directory" >&5 + $as_echo_n "checking for $am_display_PYTHON extension module directory... " >&6; } +-if test "${am_cv_python_pyexecdir+set}" = set; then ++if test "${am_cv_python_pyexecdir+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + if test "x$exec_prefix" = xNONE +@@ -14683,7 +13157,7 @@ + esac + + fi +-{ $as_echo "$as_me:$LINENO: result: $am_cv_python_pyexecdir" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_python_pyexecdir" >&5 + $as_echo "$am_cv_python_pyexecdir" >&6; } + pyexecdir=$am_cv_python_pyexecdir + +@@ -14697,7 +13171,7 @@ + + + +-{ $as_echo "$as_me:$LINENO: checking for headers required to compile python extensions" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for headers required to compile python extensions" >&5 + $as_echo_n "checking for headers required to compile python extensions... " >&6; } + py_prefix=`$PYTHON -c "import sys; print sys.prefix"` + py_exec_prefix=`$PYTHON -c "import sys; print sys.exec_prefix"` +@@ -14708,43 +13182,19 @@ + + save_CPPFLAGS="$CPPFLAGS" + CPPFLAGS="$CPPFLAGS $PYTHON_INCLUDES" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + #include + _ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || +- test ! -s conftest.err +- }; then +- { $as_echo "$as_me:$LINENO: result: found" >&5 ++if ac_fn_c_try_cpp "$LINENO"; then : ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: found" >&5 + $as_echo "found" >&6; } + HAVE_PYHDRS="yes" + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- { $as_echo "$as_me:$LINENO: result: not found" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5 + $as_echo "not found" >&6; } + HAVE_PYHDRS="no" + fi +- + rm -f conftest.err conftest.$ac_ext + CPPFLAGS="$save_CPPFLAGS" + +@@ -14755,7 +13205,7 @@ + + + # Check whether --enable-compile-warnings was given. +-if test "${enable_compile_warnings+set}" = set; then ++if test "${enable_compile_warnings+set}" = set; then : + enableval=$enable_compile_warnings; + else + enable_compile_warnings="yes" +@@ -14786,13 +13236,9 @@ + for option in -Wno-sign-compare; do + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS $option" +- { $as_echo "$as_me:$LINENO: checking whether gcc understands $option" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether gcc understands $option" >&5 + $as_echo_n "checking whether gcc understands $option... " >&6; } +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -14803,35 +13249,14 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then ++if ac_fn_c_try_compile "$LINENO"; then : + has_option=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- has_option=no ++ has_option=no + fi +- + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + CFLAGS="$SAVE_CFLAGS" +- { $as_echo "$as_me:$LINENO: result: $has_option" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $has_option" >&5 + $as_echo "$has_option" >&6; } + if test $has_option = yes; then + warning_flags="$warning_flags $option" +@@ -14845,26 +13270,24 @@ + fi + ;; + *) +- { { $as_echo "$as_me:$LINENO: error: Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" >&5 +-$as_echo "$as_me: error: Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" "$LINENO" 5 + ;; + esac + CFLAGS="$realsave_CFLAGS" +- { $as_echo "$as_me:$LINENO: checking what warning flags to pass to the C compiler" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking what warning flags to pass to the C compiler" >&5 + $as_echo_n "checking what warning flags to pass to the C compiler... " >&6; } +- { $as_echo "$as_me:$LINENO: result: $warning_flags" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $warning_flags" >&5 + $as_echo "$warning_flags" >&6; } + + # Check whether --enable-iso-c was given. +-if test "${enable_iso_c+set}" = set; then ++if test "${enable_iso_c+set}" = set; then : + enableval=$enable_iso_c; + else + enable_iso_c=no + fi + + +- { $as_echo "$as_me:$LINENO: checking what language compliance flags to pass to the C compiler" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking what language compliance flags to pass to the C compiler" >&5 + $as_echo_n "checking what language compliance flags to pass to the C compiler... " >&6; } + complCFLAGS= + if test "x$enable_iso_c" != "xno"; then +@@ -14879,152 +13302,19 @@ + esac + fi + fi +- { $as_echo "$as_me:$LINENO: result: $complCFLAGS" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $complCFLAGS" >&5 + $as_echo "$complCFLAGS" >&6; } + + WARN_CFLAGS="$warning_flags $complCFLAGS" + + + +- +- + for ac_header in pty.h values.h +-do +-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +-$as_echo_n "checking for $ac_header... " >&6; } +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 +-fi +-ac_res=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } +-else +- # Is the header compilable? +-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-$as_echo_n "checking $ac_header usability... " >&6; } +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_includes_default +-#include <$ac_header> +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_header_compiler=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_header_compiler=no +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-$as_echo "$ac_header_compiler" >&6; } +- +-# Is the header present? +-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-$as_echo_n "checking $ac_header presence... " >&6; } +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include <$ac_header> +-_ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || +- test ! -s conftest.err +- }; then +- ac_header_preproc=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_header_preproc=no +-fi +- +-rm -f conftest.err conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-$as_echo "$ac_header_preproc" >&6; } +- +-# So? What about this header? +-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +- yes:no: ) +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} +- ac_header_preproc=yes +- ;; +- no:yes:* ) +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +-$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +-$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +- +- ;; +-esac +-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +-$as_echo_n "checking for $ac_header... " >&6; } +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 +-else +- eval "$as_ac_Header=\$ac_header_preproc" +-fi +-ac_res=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } +- +-fi +-as_val=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- if test "x$as_val" = x""yes; then ++do : ++ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ++ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" ++eval as_val=\$$as_ac_Header ++ if test "x$as_val" = x""yes; then : + cat >>confdefs.h <<_ACEOF + #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 + _ACEOF +@@ -15035,7 +13325,7 @@ + + + # Check whether --enable-more-warnings was given. +-if test "${enable_more_warnings+set}" = set; then ++if test "${enable_more_warnings+set}" = set; then : + enableval=$enable_more_warnings; set_more_warnings="$enableval" + else + +@@ -15043,10 +13333,10 @@ + + fi + +-{ $as_echo "$as_me:$LINENO: checking for more warnings" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for more warnings" >&5 + $as_echo_n "checking for more warnings... " >&6; } + if test "$GCC" = "yes" -a "$set_more_warnings" != "no"; then +- { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + CFLAGS="\ + -Wall \ +@@ -15059,13 +13349,9 @@ + for option in -Wno-strict-aliasing -Wno-sign-compare; do + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS $option" +- { $as_echo "$as_me:$LINENO: checking whether gcc understands $option" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether gcc understands $option" >&5 + $as_echo_n "checking whether gcc understands $option... " >&6; } +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -15076,51 +13362,30 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then ++if ac_fn_c_try_compile "$LINENO"; then : + has_option=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- has_option=no ++ has_option=no + fi +- + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + if test $has_option = no; then + CFLAGS="$SAVE_CFLAGS" + fi +- { $as_echo "$as_me:$LINENO: result: $has_option" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $has_option" >&5 + $as_echo "$has_option" >&6; } + unset has_option + unset SAVE_CFLAGS + done + unset option + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + + + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for GIT" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GIT" >&5 + $as_echo_n "checking for GIT... " >&6; } + + if test -n "$PKG_CONFIG"; then +@@ -15128,11 +13393,11 @@ + pkg_cv_GIT_CFLAGS="$GIT_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gnome-icon-theme >= \$GNOME_ICON_THEME_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gnome-icon-theme >= \$GNOME_ICON_THEME_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gnome-icon-theme >= $GNOME_ICON_THEME_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_GIT_CFLAGS=`$PKG_CONFIG --cflags "gnome-icon-theme >= $GNOME_ICON_THEME_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -15146,11 +13411,11 @@ + pkg_cv_GIT_LIBS="$GIT_LIBS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gnome-icon-theme >= \$GNOME_ICON_THEME_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gnome-icon-theme >= \$GNOME_ICON_THEME_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gnome-icon-theme >= $GNOME_ICON_THEME_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_GIT_LIBS=`$PKG_CONFIG --libs "gnome-icon-theme >= $GNOME_ICON_THEME_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -15177,18 +13442,7 @@ + # Put the nasty error message in config.log where it belongs + echo "$GIT_PKG_ERRORS" >&5 + +- { { $as_echo "$as_me:$LINENO: error: Package requirements (gnome-icon-theme >= $GNOME_ICON_THEME_REQUIRED) were not met: +- +-$GIT_PKG_ERRORS +- +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. +- +-Alternatively, you may set the environment variables GIT_CFLAGS +-and GIT_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&5 +-$as_echo "$as_me: error: Package requirements (gnome-icon-theme >= $GNOME_ICON_THEME_REQUIRED) were not met: ++ as_fn_error "Package requirements (gnome-icon-theme >= $GNOME_ICON_THEME_REQUIRED) were not met: + + $GIT_PKG_ERRORS + +@@ -15198,22 +13452,11 @@ + Alternatively, you may set the environment variables GIT_CFLAGS + and GIT_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. +-" >&2;} +- { (exit 1); exit 1; }; } ++" "$LINENO" 5 + elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +-{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. +- +-Alternatively, you may set the environment variables GIT_CFLAGS +-and GIT_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +- +-To get pkg-config, see . +-See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++as_fn_error "The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -15222,19 +13465,18 @@ + See the pkg-config man page for more details. + + To get pkg-config, see . +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; }; } ++See \`config.log' for more details." "$LINENO" 5; } + else + GIT_CFLAGS=$pkg_cv_GIT_CFLAGS + GIT_LIBS=$pkg_cv_GIT_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + : + fi + + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for GIO" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GIO" >&5 + $as_echo_n "checking for GIO... " >&6; } + + if test -n "$PKG_CONFIG"; then +@@ -15242,11 +13484,11 @@ + pkg_cv_GIO_CFLAGS="$GIO_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gio-2.0 >= \$GIO_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gio-2.0 >= \$GIO_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gio-2.0 >= $GIO_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_GIO_CFLAGS=`$PKG_CONFIG --cflags "gio-2.0 >= $GIO_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -15260,11 +13502,11 @@ + pkg_cv_GIO_LIBS="$GIO_LIBS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gio-2.0 >= \$GIO_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gio-2.0 >= \$GIO_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gio-2.0 >= $GIO_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_GIO_LIBS=`$PKG_CONFIG --libs "gio-2.0 >= $GIO_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -15291,18 +13533,7 @@ + # Put the nasty error message in config.log where it belongs + echo "$GIO_PKG_ERRORS" >&5 + +- { { $as_echo "$as_me:$LINENO: error: Package requirements (gio-2.0 >= $GIO_REQUIRED) were not met: +- +-$GIO_PKG_ERRORS +- +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. +- +-Alternatively, you may set the environment variables GIO_CFLAGS +-and GIO_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&5 +-$as_echo "$as_me: error: Package requirements (gio-2.0 >= $GIO_REQUIRED) were not met: ++ as_fn_error "Package requirements (gio-2.0 >= $GIO_REQUIRED) were not met: + + $GIO_PKG_ERRORS + +@@ -15312,22 +13543,11 @@ + Alternatively, you may set the environment variables GIO_CFLAGS + and GIO_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. +-" >&2;} +- { (exit 1); exit 1; }; } ++" "$LINENO" 5 + elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +-{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. +- +-Alternatively, you may set the environment variables GIO_CFLAGS +-and GIO_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +- +-To get pkg-config, see . +-See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++as_fn_error "The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -15336,12 +13556,11 @@ + See the pkg-config man page for more details. + + To get pkg-config, see . +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; }; } ++See \`config.log' for more details." "$LINENO" 5; } + else + GIO_CFLAGS=$pkg_cv_GIO_CFLAGS + GIO_LIBS=$pkg_cv_GIO_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + : + fi +@@ -15350,7 +13569,7 @@ + + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for GTK" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GTK" >&5 + $as_echo_n "checking for GTK... " >&6; } + + if test -n "$PKG_CONFIG"; then +@@ -15358,11 +13577,11 @@ + pkg_cv_GTK_CFLAGS="$GTK_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0 >= \$GTK_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0 >= \$GTK_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gtk+-2.0 >= $GTK_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_GTK_CFLAGS=`$PKG_CONFIG --cflags "gtk+-2.0 >= $GTK_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -15376,11 +13595,11 @@ + pkg_cv_GTK_LIBS="$GTK_LIBS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0 >= \$GTK_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0 >= \$GTK_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gtk+-2.0 >= $GTK_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_GTK_LIBS=`$PKG_CONFIG --libs "gtk+-2.0 >= $GTK_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -15405,20 +13624,9 @@ + GTK_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "gtk+-2.0 >= $GTK_REQUIRED"` + fi + # Put the nasty error message in config.log where it belongs +- echo "$GTK_PKG_ERRORS" >&5 +- +- { { $as_echo "$as_me:$LINENO: error: Package requirements (gtk+-2.0 >= $GTK_REQUIRED) were not met: +- +-$GTK_PKG_ERRORS +- +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. +- +-Alternatively, you may set the environment variables GTK_CFLAGS +-and GTK_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&5 +-$as_echo "$as_me: error: Package requirements (gtk+-2.0 >= $GTK_REQUIRED) were not met: ++ echo "$GTK_PKG_ERRORS" >&5 ++ ++ as_fn_error "Package requirements (gtk+-2.0 >= $GTK_REQUIRED) were not met: + + $GTK_PKG_ERRORS + +@@ -15428,22 +13636,11 @@ + Alternatively, you may set the environment variables GTK_CFLAGS + and GTK_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. +-" >&2;} +- { (exit 1); exit 1; }; } ++" "$LINENO" 5 + elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +-{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. +- +-Alternatively, you may set the environment variables GTK_CFLAGS +-and GTK_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +- +-To get pkg-config, see . +-See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++as_fn_error "The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -15452,12 +13649,11 @@ + See the pkg-config man page for more details. + + To get pkg-config, see . +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; }; } ++See \`config.log' for more details." "$LINENO" 5; } + else + GTK_CFLAGS=$pkg_cv_GTK_CFLAGS + GTK_LIBS=$pkg_cv_GTK_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + : + fi +@@ -15466,7 +13662,7 @@ + + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for GNOME_APPLETS" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNOME_APPLETS" >&5 + $as_echo_n "checking for GNOME_APPLETS... " >&6; } + + if test -n "$PKG_CONFIG"; then +@@ -15474,11 +13670,11 @@ + pkg_cv_GNOME_APPLETS_CFLAGS="$GNOME_APPLETS_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libpanelapplet-2.0 >= \$LIBPANEL_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libpanelapplet-2.0 >= \$LIBPANEL_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "libpanelapplet-2.0 >= $LIBPANEL_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_GNOME_APPLETS_CFLAGS=`$PKG_CONFIG --cflags "libpanelapplet-2.0 >= $LIBPANEL_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -15492,11 +13688,11 @@ + pkg_cv_GNOME_APPLETS_LIBS="$GNOME_APPLETS_LIBS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libpanelapplet-2.0 >= \$LIBPANEL_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libpanelapplet-2.0 >= \$LIBPANEL_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "libpanelapplet-2.0 >= $LIBPANEL_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_GNOME_APPLETS_LIBS=`$PKG_CONFIG --libs "libpanelapplet-2.0 >= $LIBPANEL_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -15523,18 +13719,7 @@ + # Put the nasty error message in config.log where it belongs + echo "$GNOME_APPLETS_PKG_ERRORS" >&5 + +- { { $as_echo "$as_me:$LINENO: error: Package requirements (libpanelapplet-2.0 >= $LIBPANEL_REQUIRED) were not met: +- +-$GNOME_APPLETS_PKG_ERRORS +- +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. +- +-Alternatively, you may set the environment variables GNOME_APPLETS_CFLAGS +-and GNOME_APPLETS_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&5 +-$as_echo "$as_me: error: Package requirements (libpanelapplet-2.0 >= $LIBPANEL_REQUIRED) were not met: ++ as_fn_error "Package requirements (libpanelapplet-2.0 >= $LIBPANEL_REQUIRED) were not met: + + $GNOME_APPLETS_PKG_ERRORS + +@@ -15544,22 +13729,11 @@ + Alternatively, you may set the environment variables GNOME_APPLETS_CFLAGS + and GNOME_APPLETS_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. +-" >&2;} +- { (exit 1); exit 1; }; } ++" "$LINENO" 5 + elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +-{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. +- +-Alternatively, you may set the environment variables GNOME_APPLETS_CFLAGS +-and GNOME_APPLETS_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +- +-To get pkg-config, see . +-See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++as_fn_error "The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -15568,12 +13742,11 @@ + See the pkg-config man page for more details. + + To get pkg-config, see . +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; }; } ++See \`config.log' for more details." "$LINENO" 5; } + else + GNOME_APPLETS_CFLAGS=$pkg_cv_GNOME_APPLETS_CFLAGS + GNOME_APPLETS_LIBS=$pkg_cv_GNOME_APPLETS_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + : + fi +@@ -15582,7 +13755,7 @@ + + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for GNOMEDESKTOP" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNOMEDESKTOP" >&5 + $as_echo_n "checking for GNOMEDESKTOP... " >&6; } + + if test -n "$PKG_CONFIG"; then +@@ -15590,11 +13763,11 @@ + pkg_cv_GNOMEDESKTOP_CFLAGS="$GNOMEDESKTOP_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gnome-desktop-2.0 >= \$LIBGNOME_DESKTOP_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gnome-desktop-2.0 >= \$LIBGNOME_DESKTOP_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gnome-desktop-2.0 >= $LIBGNOME_DESKTOP_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_GNOMEDESKTOP_CFLAGS=`$PKG_CONFIG --cflags "gnome-desktop-2.0 >= $LIBGNOME_DESKTOP_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -15608,11 +13781,11 @@ + pkg_cv_GNOMEDESKTOP_LIBS="$GNOMEDESKTOP_LIBS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gnome-desktop-2.0 >= \$LIBGNOME_DESKTOP_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gnome-desktop-2.0 >= \$LIBGNOME_DESKTOP_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gnome-desktop-2.0 >= $LIBGNOME_DESKTOP_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_GNOMEDESKTOP_LIBS=`$PKG_CONFIG --libs "gnome-desktop-2.0 >= $LIBGNOME_DESKTOP_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -15639,18 +13812,7 @@ + # Put the nasty error message in config.log where it belongs + echo "$GNOMEDESKTOP_PKG_ERRORS" >&5 + +- { { $as_echo "$as_me:$LINENO: error: Package requirements (gnome-desktop-2.0 >= $LIBGNOME_DESKTOP_REQUIRED) were not met: +- +-$GNOMEDESKTOP_PKG_ERRORS +- +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. +- +-Alternatively, you may set the environment variables GNOMEDESKTOP_CFLAGS +-and GNOMEDESKTOP_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&5 +-$as_echo "$as_me: error: Package requirements (gnome-desktop-2.0 >= $LIBGNOME_DESKTOP_REQUIRED) were not met: ++ as_fn_error "Package requirements (gnome-desktop-2.0 >= $LIBGNOME_DESKTOP_REQUIRED) were not met: + + $GNOMEDESKTOP_PKG_ERRORS + +@@ -15660,22 +13822,11 @@ + Alternatively, you may set the environment variables GNOMEDESKTOP_CFLAGS + and GNOMEDESKTOP_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. +-" >&2;} +- { (exit 1); exit 1; }; } ++" "$LINENO" 5 + elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +-{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. +- +-Alternatively, you may set the environment variables GNOMEDESKTOP_CFLAGS +-and GNOMEDESKTOP_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +- +-To get pkg-config, see . +-See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++as_fn_error "The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -15684,12 +13835,11 @@ + See the pkg-config man page for more details. + + To get pkg-config, see . +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; }; } ++See \`config.log' for more details." "$LINENO" 5; } + else + GNOMEDESKTOP_CFLAGS=$pkg_cv_GNOMEDESKTOP_CFLAGS + GNOMEDESKTOP_LIBS=$pkg_cv_GNOMEDESKTOP_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + : + fi +@@ -15699,7 +13849,7 @@ + build_gtop_applets=false + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for GTOP_APPLETS" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GTOP_APPLETS" >&5 + $as_echo_n "checking for GTOP_APPLETS... " >&6; } + + if test -n "$PKG_CONFIG"; then +@@ -15707,11 +13857,11 @@ + pkg_cv_GTOP_APPLETS_CFLAGS="$GTOP_APPLETS_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libgtop-2.0 >= \$LIBGTOP_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libgtop-2.0 >= \$LIBGTOP_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "libgtop-2.0 >= $LIBGTOP_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_GTOP_APPLETS_CFLAGS=`$PKG_CONFIG --cflags "libgtop-2.0 >= $LIBGTOP_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -15725,11 +13875,11 @@ + pkg_cv_GTOP_APPLETS_LIBS="$GTOP_APPLETS_LIBS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libgtop-2.0 >= \$LIBGTOP_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libgtop-2.0 >= \$LIBGTOP_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "libgtop-2.0 >= $LIBGTOP_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_GTOP_APPLETS_LIBS=`$PKG_CONFIG --libs "libgtop-2.0 >= $LIBGTOP_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -15756,17 +13906,17 @@ + # Put the nasty error message in config.log where it belongs + echo "$GTOP_APPLETS_PKG_ERRORS" >&5 + +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } +- { $as_echo "$as_me:$LINENO: WARNING: libgtop not found. Not building gtop applets." >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: libgtop not found. Not building gtop applets." >&5 + $as_echo "$as_me: WARNING: libgtop not found. Not building gtop applets." >&2;} + elif test $pkg_failed = untried; then +- { $as_echo "$as_me:$LINENO: WARNING: libgtop not found. Not building gtop applets." >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: libgtop not found. Not building gtop applets." >&5 + $as_echo "$as_me: WARNING: libgtop not found. Not building gtop applets." >&2;} + else + GTOP_APPLETS_CFLAGS=$pkg_cv_GTOP_APPLETS_CFLAGS + GTOP_APPLETS_LIBS=$pkg_cv_GTOP_APPLETS_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + build_gtop_applets=true + fi +@@ -15783,7 +13933,7 @@ + + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for LIBGNOMEKBDUI" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIBGNOMEKBDUI" >&5 + $as_echo_n "checking for LIBGNOMEKBDUI... " >&6; } + + if test -n "$PKG_CONFIG"; then +@@ -15791,11 +13941,11 @@ + pkg_cv_LIBGNOMEKBDUI_CFLAGS="$LIBGNOMEKBDUI_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libgnomekbdui >= 2.21.4.1\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libgnomekbdui >= 2.21.4.1\""; } >&5 + ($PKG_CONFIG --exists --print-errors "libgnomekbdui >= 2.21.4.1") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_LIBGNOMEKBDUI_CFLAGS=`$PKG_CONFIG --cflags "libgnomekbdui >= 2.21.4.1" 2>/dev/null` + else + pkg_failed=yes +@@ -15809,11 +13959,11 @@ + pkg_cv_LIBGNOMEKBDUI_LIBS="$LIBGNOMEKBDUI_LIBS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libgnomekbdui >= 2.21.4.1\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libgnomekbdui >= 2.21.4.1\""; } >&5 + ($PKG_CONFIG --exists --print-errors "libgnomekbdui >= 2.21.4.1") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_LIBGNOMEKBDUI_LIBS=`$PKG_CONFIG --libs "libgnomekbdui >= 2.21.4.1" 2>/dev/null` + else + pkg_failed=yes +@@ -15840,7 +13990,7 @@ + # Put the nasty error message in config.log where it belongs + echo "$LIBGNOMEKBDUI_PKG_ERRORS" >&5 + +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + HAVE_LIBGNOMEKBD=no + elif test $pkg_failed = untried; then +@@ -15848,7 +13998,7 @@ + else + LIBGNOMEKBDUI_CFLAGS=$pkg_cv_LIBGNOMEKBDUI_CFLAGS + LIBGNOMEKBDUI_LIBS=$pkg_cv_LIBGNOMEKBDUI_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + HAVE_LIBGNOMEKBD=yes + fi +@@ -15858,7 +14008,7 @@ + + if test "x$HAVE_LIBGNOMEKBD" = "xno"; then + BUILD_KEYBOARD_APPLET=no +- { $as_echo "$as_me:$LINENO: WARNING: libgnomekbd was not found and is required to build gnome-keyboard-applet." >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: libgnomekbd was not found and is required to build gnome-keyboard-applet." >&5 + $as_echo "$as_me: WARNING: libgnomekbd was not found and is required to build gnome-keyboard-applet." >&2;} + else + BUILD_KEYBOARD_APPLET=yes +@@ -15875,7 +14025,7 @@ + + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for GNOME_SETTINGS_DAEMON" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNOME_SETTINGS_DAEMON" >&5 + $as_echo_n "checking for GNOME_SETTINGS_DAEMON... " >&6; } + + if test -n "$PKG_CONFIG"; then +@@ -15883,11 +14033,11 @@ + pkg_cv_GNOME_SETTINGS_DAEMON_CFLAGS="$GNOME_SETTINGS_DAEMON_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gnome-settings-daemon\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gnome-settings-daemon\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gnome-settings-daemon") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_GNOME_SETTINGS_DAEMON_CFLAGS=`$PKG_CONFIG --cflags "gnome-settings-daemon" 2>/dev/null` + else + pkg_failed=yes +@@ -15901,11 +14051,11 @@ + pkg_cv_GNOME_SETTINGS_DAEMON_LIBS="$GNOME_SETTINGS_DAEMON_LIBS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gnome-settings-daemon\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gnome-settings-daemon\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gnome-settings-daemon") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_GNOME_SETTINGS_DAEMON_LIBS=`$PKG_CONFIG --libs "gnome-settings-daemon" 2>/dev/null` + else + pkg_failed=yes +@@ -15932,7 +14082,7 @@ + # Put the nasty error message in config.log where it belongs + echo "$GNOME_SETTINGS_DAEMON_PKG_ERRORS" >&5 + +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + HAVE_GNOME_SETTINGS_DAEMON=no + elif test $pkg_failed = untried; then +@@ -15940,13 +14090,13 @@ + else + GNOME_SETTINGS_DAEMON_CFLAGS=$pkg_cv_GNOME_SETTINGS_DAEMON_CFLAGS + GNOME_SETTINGS_DAEMON_LIBS=$pkg_cv_GNOME_SETTINGS_DAEMON_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + HAVE_GNOME_SETTINGS_DAEMON=yes + fi + + if test "x$HAVE_GNOME_SETTINGS_DAEMON" = "xno"; then +- { $as_echo "$as_me:$LINENO: WARNING: gnome-settings-daemon DBUS API is required to build modem-applet." >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: gnome-settings-daemon DBUS API is required to build modem-applet." >&5 + $as_echo "$as_me: WARNING: gnome-settings-daemon DBUS API is required to build modem-applet." >&2;} + fi + +@@ -15955,7 +14105,7 @@ + + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for LIBWNCK" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIBWNCK" >&5 + $as_echo_n "checking for LIBWNCK... " >&6; } + + if test -n "$PKG_CONFIG"; then +@@ -15963,11 +14113,11 @@ + pkg_cv_LIBWNCK_CFLAGS="$LIBWNCK_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libwnck-1.0 >= \$LIBWNCK_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libwnck-1.0 >= \$LIBWNCK_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "libwnck-1.0 >= $LIBWNCK_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_LIBWNCK_CFLAGS=`$PKG_CONFIG --cflags "libwnck-1.0 >= $LIBWNCK_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -15981,11 +14131,11 @@ + pkg_cv_LIBWNCK_LIBS="$LIBWNCK_LIBS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libwnck-1.0 >= \$LIBWNCK_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libwnck-1.0 >= \$LIBWNCK_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "libwnck-1.0 >= $LIBWNCK_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_LIBWNCK_LIBS=`$PKG_CONFIG --libs "libwnck-1.0 >= $LIBWNCK_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -16012,19 +14162,17 @@ + # Put the nasty error message in config.log where it belongs + echo "$LIBWNCK_PKG_ERRORS" >&5 + +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } +- { { $as_echo "$as_me:$LINENO: error: libwnck is required to build gnome-applets." >&5 +-$as_echo "$as_me: error: libwnck is required to build gnome-applets." >&2;} +- { (exit 1); exit 1; }; } ++ { as_fn_set_status 1 ++as_fn_error "libwnck is required to build gnome-applets." "$LINENO" 5; } + elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: libwnck is required to build gnome-applets." >&5 +-$as_echo "$as_me: error: libwnck is required to build gnome-applets." >&2;} +- { (exit 1); exit 1; }; } ++ { as_fn_set_status 1 ++as_fn_error "libwnck is required to build gnome-applets." "$LINENO" 5; } + else + LIBWNCK_CFLAGS=$pkg_cv_LIBWNCK_CFLAGS + LIBWNCK_LIBS=$pkg_cv_LIBWNCK_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + : + fi +@@ -16036,7 +14184,7 @@ + LIBNOTIFY_LIBS= + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for LIBNOTIFY" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIBNOTIFY" >&5 + $as_echo_n "checking for LIBNOTIFY... " >&6; } + + if test -n "$PKG_CONFIG"; then +@@ -16044,11 +14192,11 @@ + pkg_cv_LIBNOTIFY_CFLAGS="$LIBNOTIFY_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libnotify >= \$LIBNOTIFY_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libnotify >= \$LIBNOTIFY_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "libnotify >= $LIBNOTIFY_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_LIBNOTIFY_CFLAGS=`$PKG_CONFIG --cflags "libnotify >= $LIBNOTIFY_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -16062,11 +14210,11 @@ + pkg_cv_LIBNOTIFY_LIBS="$LIBNOTIFY_LIBS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libnotify >= \$LIBNOTIFY_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libnotify >= \$LIBNOTIFY_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "libnotify >= $LIBNOTIFY_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_LIBNOTIFY_LIBS=`$PKG_CONFIG --libs "libnotify >= $LIBNOTIFY_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -16093,7 +14241,7 @@ + # Put the nasty error message in config.log where it belongs + echo "$LIBNOTIFY_PKG_ERRORS" >&5 + +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + HAVE_LIBNOTIFY="no" + elif test $pkg_failed = untried; then +@@ -16101,16 +14249,14 @@ + else + LIBNOTIFY_CFLAGS=$pkg_cv_LIBNOTIFY_CFLAGS + LIBNOTIFY_LIBS=$pkg_cv_LIBNOTIFY_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + HAVE_LIBNOTIFY="yes" + fi + + if test "x$HAVE_LIBNOTIFY" = "xyes"; then + +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_LIBNOTIFY 1 +-_ACEOF ++$as_echo "#define HAVE_LIBNOTIFY 1" >>confdefs.h + + fi + +@@ -16119,7 +14265,7 @@ + + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for CPUFREQ_SELECTOR" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for CPUFREQ_SELECTOR" >&5 + $as_echo_n "checking for CPUFREQ_SELECTOR... " >&6; } + + if test -n "$PKG_CONFIG"; then +@@ -16127,11 +14273,11 @@ + pkg_cv_CPUFREQ_SELECTOR_CFLAGS="$CPUFREQ_SELECTOR_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED gobject-2.0 >= \$GLIB_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED gobject-2.0 >= \$GLIB_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED gobject-2.0 >= $GLIB_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_CPUFREQ_SELECTOR_CFLAGS=`$PKG_CONFIG --cflags "glib-2.0 >= $GLIB_REQUIRED gobject-2.0 >= $GLIB_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -16145,11 +14291,11 @@ + pkg_cv_CPUFREQ_SELECTOR_LIBS="$CPUFREQ_SELECTOR_LIBS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED gobject-2.0 >= \$GLIB_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED gobject-2.0 >= \$GLIB_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED gobject-2.0 >= $GLIB_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_CPUFREQ_SELECTOR_LIBS=`$PKG_CONFIG --libs "glib-2.0 >= $GLIB_REQUIRED gobject-2.0 >= $GLIB_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -16176,18 +14322,7 @@ + # Put the nasty error message in config.log where it belongs + echo "$CPUFREQ_SELECTOR_PKG_ERRORS" >&5 + +- { { $as_echo "$as_me:$LINENO: error: Package requirements (glib-2.0 >= $GLIB_REQUIRED gobject-2.0 >= $GLIB_REQUIRED) were not met: +- +-$CPUFREQ_SELECTOR_PKG_ERRORS +- +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. +- +-Alternatively, you may set the environment variables CPUFREQ_SELECTOR_CFLAGS +-and CPUFREQ_SELECTOR_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&5 +-$as_echo "$as_me: error: Package requirements (glib-2.0 >= $GLIB_REQUIRED gobject-2.0 >= $GLIB_REQUIRED) were not met: ++ as_fn_error "Package requirements (glib-2.0 >= $GLIB_REQUIRED gobject-2.0 >= $GLIB_REQUIRED) were not met: + + $CPUFREQ_SELECTOR_PKG_ERRORS + +@@ -16197,22 +14332,11 @@ + Alternatively, you may set the environment variables CPUFREQ_SELECTOR_CFLAGS + and CPUFREQ_SELECTOR_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. +-" >&2;} +- { (exit 1); exit 1; }; } ++" "$LINENO" 5 + elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +-{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. +- +-Alternatively, you may set the environment variables CPUFREQ_SELECTOR_CFLAGS +-and CPUFREQ_SELECTOR_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +- +-To get pkg-config, see . +-See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++as_fn_error "The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -16221,12 +14345,11 @@ + See the pkg-config man page for more details. + + To get pkg-config, see . +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; }; } ++See \`config.log' for more details." "$LINENO" 5; } + else + CPUFREQ_SELECTOR_CFLAGS=$pkg_cv_CPUFREQ_SELECTOR_CFLAGS + CPUFREQ_SELECTOR_LIBS=$pkg_cv_CPUFREQ_SELECTOR_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + : + fi +@@ -16235,7 +14358,7 @@ + + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for DBUS" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for DBUS" >&5 + $as_echo_n "checking for DBUS... " >&6; } + + if test -n "$PKG_CONFIG"; then +@@ -16243,11 +14366,11 @@ + pkg_cv_DBUS_CFLAGS="$DBUS_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"dbus-1 >= \$DBUS_REQUIRED dbus-glib-1 >= \$DBUS_GLIB_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"dbus-1 >= \$DBUS_REQUIRED dbus-glib-1 >= \$DBUS_GLIB_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "dbus-1 >= $DBUS_REQUIRED dbus-glib-1 >= $DBUS_GLIB_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_DBUS_CFLAGS=`$PKG_CONFIG --cflags "dbus-1 >= $DBUS_REQUIRED dbus-glib-1 >= $DBUS_GLIB_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -16261,11 +14384,11 @@ + pkg_cv_DBUS_LIBS="$DBUS_LIBS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"dbus-1 >= \$DBUS_REQUIRED dbus-glib-1 >= \$DBUS_GLIB_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"dbus-1 >= \$DBUS_REQUIRED dbus-glib-1 >= \$DBUS_GLIB_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "dbus-1 >= $DBUS_REQUIRED dbus-glib-1 >= $DBUS_GLIB_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_DBUS_LIBS=`$PKG_CONFIG --libs "dbus-1 >= $DBUS_REQUIRED dbus-glib-1 >= $DBUS_GLIB_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -16292,7 +14415,7 @@ + # Put the nasty error message in config.log where it belongs + echo "$DBUS_PKG_ERRORS" >&5 + +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + HAVE_DBUS=no + elif test $pkg_failed = untried; then +@@ -16300,16 +14423,14 @@ + else + DBUS_CFLAGS=$pkg_cv_DBUS_CFLAGS + DBUS_LIBS=$pkg_cv_DBUS_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + HAVE_DBUS=yes + fi + + if test "x$BUILD_KEYBOARD_APPLET" = "xyes"; then + if test "x$HAVE_DBUS" = "xno"; then +- { { $as_echo "$as_me:$LINENO: error: dbus was not found and is required to build gnome-keyboard-applet." >&5 +-$as_echo "$as_me: error: dbus was not found and is required to build gnome-keyboard-applet." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "dbus was not found and is required to build gnome-keyboard-applet." "$LINENO" 5 + fi + fi + +@@ -16319,7 +14440,7 @@ + POLKIT_CFLAGS= + POLKIT_LIBS= + # Check whether --enable-polkit was given. +-if test "${enable_polkit+set}" = set; then ++if test "${enable_polkit+set}" = set; then : + enableval=$enable_polkit; enable_polkit=$enableval + else + enable_polkit=auto +@@ -16328,7 +14449,7 @@ + if test "x$enable_polkit" != "xno"; then + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for POLKIT" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for POLKIT" >&5 + $as_echo_n "checking for POLKIT... " >&6; } + + if test -n "$PKG_CONFIG"; then +@@ -16336,11 +14457,11 @@ + pkg_cv_POLKIT_CFLAGS="$POLKIT_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"polkit-gobject-1 >= \$POLKIT_REQUIRED dbus-glib-1 >= \$DBUS_GLIB_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"polkit-gobject-1 >= \$POLKIT_REQUIRED dbus-glib-1 >= \$DBUS_GLIB_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "polkit-gobject-1 >= $POLKIT_REQUIRED dbus-glib-1 >= $DBUS_GLIB_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_POLKIT_CFLAGS=`$PKG_CONFIG --cflags "polkit-gobject-1 >= $POLKIT_REQUIRED dbus-glib-1 >= $DBUS_GLIB_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -16354,11 +14475,11 @@ + pkg_cv_POLKIT_LIBS="$POLKIT_LIBS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"polkit-gobject-1 >= \$POLKIT_REQUIRED dbus-glib-1 >= \$DBUS_GLIB_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"polkit-gobject-1 >= \$POLKIT_REQUIRED dbus-glib-1 >= \$DBUS_GLIB_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "polkit-gobject-1 >= $POLKIT_REQUIRED dbus-glib-1 >= $DBUS_GLIB_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_POLKIT_LIBS=`$PKG_CONFIG --libs "polkit-gobject-1 >= $POLKIT_REQUIRED dbus-glib-1 >= $DBUS_GLIB_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -16385,7 +14506,7 @@ + # Put the nasty error message in config.log where it belongs + echo "$POLKIT_PKG_ERRORS" >&5 + +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + HAVE_POLKIT=no + elif test $pkg_failed = untried; then +@@ -16393,14 +14514,12 @@ + else + POLKIT_CFLAGS=$pkg_cv_POLKIT_CFLAGS + POLKIT_LIBS=$pkg_cv_POLKIT_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + HAVE_POLKIT=yes + fi + if test "x$enable_polkit" = "xyes" -a "x$HAVE_POLKIT" = "xno"; then +- { { $as_echo "$as_me:$LINENO: error: PolicyKit support explicitly requested but dependencies not found" >&5 +-$as_echo "$as_me: error: PolicyKit support explicitly requested but dependencies not found" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "PolicyKit support explicitly requested but dependencies not found" "$LINENO" 5 + fi + fi + if test "x$enable_polkit" = "xno"; then +@@ -16408,9 +14527,7 @@ + fi + if test "x$HAVE_POLKIT" = "xyes"; then + +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_POLKIT 1 +-_ACEOF ++$as_echo "#define HAVE_POLKIT 1" >>confdefs.h + + fi + if test "x$HAVE_POLKIT" = "xyes"; then +@@ -16429,7 +14546,7 @@ + HAL_LIBS= + + # Check whether --with-hal was given. +-if test "${with_hal+set}" = set; then ++if test "${with_hal+set}" = set; then : + withval=$with_hal; + fi + +@@ -16437,7 +14554,7 @@ + if test "x$with_hal" != xno; then + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for HAL" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for HAL" >&5 + $as_echo_n "checking for HAL... " >&6; } + + if test -n "$PKG_CONFIG"; then +@@ -16445,11 +14562,11 @@ + pkg_cv_HAL_CFLAGS="$HAL_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"hal >= \$HAL_REQUIRED dbus-glib-1 >= \$DBUS_GLIB_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"hal >= \$HAL_REQUIRED dbus-glib-1 >= \$DBUS_GLIB_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "hal >= $HAL_REQUIRED dbus-glib-1 >= $DBUS_GLIB_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_HAL_CFLAGS=`$PKG_CONFIG --cflags "hal >= $HAL_REQUIRED dbus-glib-1 >= $DBUS_GLIB_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -16463,11 +14580,11 @@ + pkg_cv_HAL_LIBS="$HAL_LIBS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"hal >= \$HAL_REQUIRED dbus-glib-1 >= \$DBUS_GLIB_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"hal >= \$HAL_REQUIRED dbus-glib-1 >= \$DBUS_GLIB_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "hal >= $HAL_REQUIRED dbus-glib-1 >= $DBUS_GLIB_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_HAL_LIBS=`$PKG_CONFIG --libs "hal >= $HAL_REQUIRED dbus-glib-1 >= $DBUS_GLIB_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -16494,7 +14611,7 @@ + # Put the nasty error message in config.log where it belongs + echo "$HAL_PKG_ERRORS" >&5 + +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + HAVE_HAL="no" + elif test $pkg_failed = untried; then +@@ -16502,20 +14619,18 @@ + else + HAL_CFLAGS=$pkg_cv_HAL_CFLAGS + HAL_LIBS=$pkg_cv_HAL_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + HAVE_HAL="yes" + fi + + if test "x$HAVE_HAL" = "xyes"; then + +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_HAL 1 +-_ACEOF ++$as_echo "#define HAVE_HAL 1" >>confdefs.h + + fi + else +- { $as_echo "$as_me:$LINENO: WARNING: \"Hal support disabled\"" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"Hal support disabled\"" >&5 + $as_echo "$as_me: WARNING: \"Hal support disabled\"" >&2;} + fi + +@@ -16524,11 +14639,11 @@ + + + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gucharmap-2 >= \$GUCHARMAP2_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gucharmap-2 >= \$GUCHARMAP2_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gucharmap-2 >= $GUCHARMAP2_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + have_gucharmap=yes have_gucharmap_2=yes + else + have_gucharmap_2=no +@@ -16536,7 +14651,7 @@ + if test "$have_gucharmap_2" = "yes"; then + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for GUCHARMAP" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GUCHARMAP" >&5 + $as_echo_n "checking for GUCHARMAP... " >&6; } + + if test -n "$PKG_CONFIG"; then +@@ -16544,11 +14659,11 @@ + pkg_cv_GUCHARMAP_CFLAGS="$GUCHARMAP_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gucharmap-2 >= \$GUCHARMAP2_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gucharmap-2 >= \$GUCHARMAP2_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gucharmap-2 >= $GUCHARMAP2_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_GUCHARMAP_CFLAGS=`$PKG_CONFIG --cflags "gucharmap-2 >= $GUCHARMAP2_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -16562,11 +14677,11 @@ + pkg_cv_GUCHARMAP_LIBS="$GUCHARMAP_LIBS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gucharmap-2 >= \$GUCHARMAP2_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gucharmap-2 >= \$GUCHARMAP2_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gucharmap-2 >= $GUCHARMAP2_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_GUCHARMAP_LIBS=`$PKG_CONFIG --libs "gucharmap-2 >= $GUCHARMAP2_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -16593,7 +14708,7 @@ + # Put the nasty error message in config.log where it belongs + echo "$GUCHARMAP_PKG_ERRORS" >&5 + +- { { $as_echo "$as_me:$LINENO: error: Package requirements (gucharmap-2 >= $GUCHARMAP2_REQUIRED) were not met: ++ as_fn_error "Package requirements (gucharmap-2 >= $GUCHARMAP2_REQUIRED) were not met: + + $GUCHARMAP_PKG_ERRORS + +@@ -16603,33 +14718,11 @@ + Alternatively, you may set the environment variables GUCHARMAP_CFLAGS + and GUCHARMAP_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. +-" >&5 +-$as_echo "$as_me: error: Package requirements (gucharmap-2 >= $GUCHARMAP2_REQUIRED) were not met: +- +-$GUCHARMAP_PKG_ERRORS +- +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. +- +-Alternatively, you may set the environment variables GUCHARMAP_CFLAGS +-and GUCHARMAP_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&2;} +- { (exit 1); exit 1; }; } ++" "$LINENO" 5 + elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +-{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. +- +-Alternatively, you may set the environment variables GUCHARMAP_CFLAGS +-and GUCHARMAP_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +- +-To get pkg-config, see . +-See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++as_fn_error "The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -16638,19 +14731,18 @@ + See the pkg-config man page for more details. + + To get pkg-config, see . +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; }; } ++See \`config.log' for more details." "$LINENO" 5; } + else + GUCHARMAP_CFLAGS=$pkg_cv_GUCHARMAP_CFLAGS + GUCHARMAP_LIBS=$pkg_cv_GUCHARMAP_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + : + fi + else + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for GUCHARMAP" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GUCHARMAP" >&5 + $as_echo_n "checking for GUCHARMAP... " >&6; } + + if test -n "$PKG_CONFIG"; then +@@ -16658,11 +14750,11 @@ + pkg_cv_GUCHARMAP_CFLAGS="$GUCHARMAP_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gucharmap >= \$GUCHARMAP_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gucharmap >= \$GUCHARMAP_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gucharmap >= $GUCHARMAP_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_GUCHARMAP_CFLAGS=`$PKG_CONFIG --cflags "gucharmap >= $GUCHARMAP_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -16676,11 +14768,11 @@ + pkg_cv_GUCHARMAP_LIBS="$GUCHARMAP_LIBS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gucharmap >= \$GUCHARMAP_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gucharmap >= \$GUCHARMAP_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gucharmap >= $GUCHARMAP_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_GUCHARMAP_LIBS=`$PKG_CONFIG --libs "gucharmap >= $GUCHARMAP_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -16707,7 +14799,7 @@ + # Put the nasty error message in config.log where it belongs + echo "$GUCHARMAP_PKG_ERRORS" >&5 + +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + have_gucharmap=no + elif test $pkg_failed = untried; then +@@ -16715,7 +14807,7 @@ + else + GUCHARMAP_CFLAGS=$pkg_cv_GUCHARMAP_CFLAGS + GUCHARMAP_LIBS=$pkg_cv_GUCHARMAP_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + have_gucharmap=yes + fi +@@ -16723,19 +14815,15 @@ + + if test "$have_gucharmap_2" = "yes"; then + +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_GUCHARMAP_2 1 +-_ACEOF ++$as_echo "#define HAVE_GUCHARMAP_2 1" >>confdefs.h + + fi + if test "$have_gucharmap" = "yes"; then + +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_GUCHARMAP 1 +-_ACEOF ++$as_echo "#define HAVE_GUCHARMAP 1" >>confdefs.h + + else +- { $as_echo "$as_me:$LINENO: WARNING: *** 'charpick' applet will not be built with gucharmap support ***" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: *** 'charpick' applet will not be built with gucharmap support ***" >&5 + $as_echo "$as_me: WARNING: *** 'charpick' applet will not be built with gucharmap support ***" >&2;} + fi + +@@ -16745,7 +14833,7 @@ + PYGTK_LIBS= + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for PYGTK" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for PYGTK" >&5 + $as_echo_n "checking for PYGTK... " >&6; } + + if test -n "$PKG_CONFIG"; then +@@ -16753,15 +14841,15 @@ + pkg_cv_PYGTK_CFLAGS="$PYGTK_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"pygtk-2.0 >= \$PYGTK_REQUIRED ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"pygtk-2.0 >= \$PYGTK_REQUIRED + pygobject-2.0 >= \$PYGOBJECT_REQUIRED +- gnome-python-2.0 >= \$GNOME_PYTHON_REQUIRED\"") >&5 ++ gnome-python-2.0 >= \$GNOME_PYTHON_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "pygtk-2.0 >= $PYGTK_REQUIRED + pygobject-2.0 >= $PYGOBJECT_REQUIRED + gnome-python-2.0 >= $GNOME_PYTHON_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_PYGTK_CFLAGS=`$PKG_CONFIG --cflags "pygtk-2.0 >= $PYGTK_REQUIRED + pygobject-2.0 >= $PYGOBJECT_REQUIRED + gnome-python-2.0 >= $GNOME_PYTHON_REQUIRED" 2>/dev/null` +@@ -16777,15 +14865,15 @@ + pkg_cv_PYGTK_LIBS="$PYGTK_LIBS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"pygtk-2.0 >= \$PYGTK_REQUIRED ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"pygtk-2.0 >= \$PYGTK_REQUIRED + pygobject-2.0 >= \$PYGOBJECT_REQUIRED +- gnome-python-2.0 >= \$GNOME_PYTHON_REQUIRED\"") >&5 ++ gnome-python-2.0 >= \$GNOME_PYTHON_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "pygtk-2.0 >= $PYGTK_REQUIRED + pygobject-2.0 >= $PYGOBJECT_REQUIRED + gnome-python-2.0 >= $GNOME_PYTHON_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_PYGTK_LIBS=`$PKG_CONFIG --libs "pygtk-2.0 >= $PYGTK_REQUIRED + pygobject-2.0 >= $PYGOBJECT_REQUIRED + gnome-python-2.0 >= $GNOME_PYTHON_REQUIRED" 2>/dev/null` +@@ -16818,7 +14906,7 @@ + # Put the nasty error message in config.log where it belongs + echo "$PYGTK_PKG_ERRORS" >&5 + +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + HAVE_PYGTK="no" + elif test $pkg_failed = untried; then +@@ -16826,7 +14914,7 @@ + else + PYGTK_CFLAGS=$pkg_cv_PYGTK_CFLAGS + PYGTK_LIBS=$pkg_cv_PYGTK_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + HAVE_PYGTK="yes" + fi +@@ -16835,7 +14923,7 @@ + + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for XML2" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for XML2" >&5 + $as_echo_n "checking for XML2... " >&6; } + + if test -n "$PKG_CONFIG"; then +@@ -16843,11 +14931,11 @@ + pkg_cv_XML2_CFLAGS="$XML2_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libxml-2.0 >= \$LIBXML_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libxml-2.0 >= \$LIBXML_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "libxml-2.0 >= $LIBXML_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_XML2_CFLAGS=`$PKG_CONFIG --cflags "libxml-2.0 >= $LIBXML_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -16861,11 +14949,11 @@ + pkg_cv_XML2_LIBS="$XML2_LIBS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libxml-2.0 >= \$LIBXML_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libxml-2.0 >= \$LIBXML_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "libxml-2.0 >= $LIBXML_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_XML2_LIBS=`$PKG_CONFIG --libs "libxml-2.0 >= $LIBXML_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -16892,18 +14980,7 @@ + # Put the nasty error message in config.log where it belongs + echo "$XML2_PKG_ERRORS" >&5 + +- { { $as_echo "$as_me:$LINENO: error: Package requirements (libxml-2.0 >= $LIBXML_REQUIRED) were not met: +- +-$XML2_PKG_ERRORS +- +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. +- +-Alternatively, you may set the environment variables XML2_CFLAGS +-and XML2_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&5 +-$as_echo "$as_me: error: Package requirements (libxml-2.0 >= $LIBXML_REQUIRED) were not met: ++ as_fn_error "Package requirements (libxml-2.0 >= $LIBXML_REQUIRED) were not met: + + $XML2_PKG_ERRORS + +@@ -16913,22 +14990,11 @@ + Alternatively, you may set the environment variables XML2_CFLAGS + and XML2_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. +-" >&2;} +- { (exit 1); exit 1; }; } ++" "$LINENO" 5 + elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +-{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. +- +-Alternatively, you may set the environment variables XML2_CFLAGS +-and XML2_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +- +-To get pkg-config, see . +-See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++as_fn_error "The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -16937,12 +15003,11 @@ + See the pkg-config man page for more details. + + To get pkg-config, see . +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; }; } ++See \`config.log' for more details." "$LINENO" 5; } + else + XML2_CFLAGS=$pkg_cv_XML2_CFLAGS + XML2_LIBS=$pkg_cv_XML2_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + : + fi +@@ -16952,7 +15017,7 @@ + build_libgweather_applets=false + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for LIBGWEATHER" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIBGWEATHER" >&5 + $as_echo_n "checking for LIBGWEATHER... " >&6; } + + if test -n "$PKG_CONFIG"; then +@@ -16960,11 +15025,11 @@ + pkg_cv_LIBGWEATHER_CFLAGS="$LIBGWEATHER_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gweather >= \$GWEATHER_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gweather >= \$GWEATHER_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gweather >= $GWEATHER_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_LIBGWEATHER_CFLAGS=`$PKG_CONFIG --cflags "gweather >= $GWEATHER_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -16978,11 +15043,11 @@ + pkg_cv_LIBGWEATHER_LIBS="$LIBGWEATHER_LIBS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gweather >= \$GWEATHER_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gweather >= \$GWEATHER_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gweather >= $GWEATHER_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_LIBGWEATHER_LIBS=`$PKG_CONFIG --libs "gweather >= $GWEATHER_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -17009,17 +15074,17 @@ + # Put the nasty error message in config.log where it belongs + echo "$LIBGWEATHER_PKG_ERRORS" >&5 + +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } +- { $as_echo "$as_me:$LINENO: WARNING: libgweather not found. Not building the weather applet." >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: libgweather not found. Not building the weather applet." >&5 + $as_echo "$as_me: WARNING: libgweather not found. Not building the weather applet." >&2;} + elif test $pkg_failed = untried; then +- { $as_echo "$as_me:$LINENO: WARNING: libgweather not found. Not building the weather applet." >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: libgweather not found. Not building the weather applet." >&5 + $as_echo "$as_me: WARNING: libgweather not found. Not building the weather applet." >&2;} + else + LIBGWEATHER_CFLAGS=$pkg_cv_LIBGWEATHER_CFLAGS + LIBGWEATHER_LIBS=$pkg_cv_LIBGWEATHER_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + build_libgweather_applets=true + fi +@@ -17035,7 +15100,7 @@ + + + # Check whether --enable-networkmanager was given. +-if test "${enable_networkmanager+set}" = set; then ++if test "${enable_networkmanager+set}" = set; then : + enableval=$enable_networkmanager; ENABLE_NETWORKMANAGER=$enableval + else + ENABLE_NETWORKMANAGER=yes +@@ -17046,7 +15111,7 @@ + if test "x$ENABLE_NETWORKMANAGER" = "xyes"; then + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for NETWORKMANAGER" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for NETWORKMANAGER" >&5 + $as_echo_n "checking for NETWORKMANAGER... " >&6; } + + if test -n "$PKG_CONFIG"; then +@@ -17054,11 +15119,11 @@ + pkg_cv_NETWORKMANAGER_CFLAGS="$NETWORKMANAGER_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"NetworkManager >= \$NETWORKMANAGER_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"NetworkManager >= \$NETWORKMANAGER_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "NetworkManager >= $NETWORKMANAGER_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_NETWORKMANAGER_CFLAGS=`$PKG_CONFIG --cflags "NetworkManager >= $NETWORKMANAGER_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -17072,11 +15137,11 @@ + pkg_cv_NETWORKMANAGER_LIBS="$NETWORKMANAGER_LIBS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"NetworkManager >= \$NETWORKMANAGER_REQUIRED\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"NetworkManager >= \$NETWORKMANAGER_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "NetworkManager >= $NETWORKMANAGER_REQUIRED") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_NETWORKMANAGER_LIBS=`$PKG_CONFIG --libs "NetworkManager >= $NETWORKMANAGER_REQUIRED" 2>/dev/null` + else + pkg_failed=yes +@@ -17103,7 +15168,7 @@ + # Put the nasty error message in config.log where it belongs + echo "$NETWORKMANAGER_PKG_ERRORS" >&5 + +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + HAVE_NETWORKMANAGER=no + elif test $pkg_failed = untried; then +@@ -17111,16 +15176,14 @@ + else + NETWORKMANAGER_CFLAGS=$pkg_cv_NETWORKMANAGER_CFLAGS + NETWORKMANAGER_LIBS=$pkg_cv_NETWORKMANAGER_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + HAVE_NETWORKMANAGER=yes + fi + + if test "x$HAVE_NETWORKMANAGER" = "xyes"; then + +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_NETWORKMANAGER 1 +-_ACEOF ++$as_echo "#define HAVE_NETWORKMANAGER 1" >>confdefs.h + + + +@@ -17128,7 +15191,7 @@ + fi + + # Check whether --enable-mixer-applet was given. +-if test "${enable_mixer_applet+set}" = set; then ++if test "${enable_mixer_applet+set}" = set; then : + enableval=$enable_mixer_applet; enable_mixer=$enableval + else + enable_mixer=no +@@ -17140,7 +15203,7 @@ + GST10_PKGS="gstreamer-0.10 >= $GST10_REQUIRED gstreamer-interfaces-0.10 >= $GST10_REQUIRED gstreamer-audio-0.10 >= $GST10_REQUIRED" + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for MIXER" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for MIXER" >&5 + $as_echo_n "checking for MIXER... " >&6; } + + if test -n "$PKG_CONFIG"; then +@@ -17148,11 +15211,11 @@ + pkg_cv_MIXER_CFLAGS="$MIXER_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$GST10_PKGS\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$GST10_PKGS\""; } >&5 + ($PKG_CONFIG --exists --print-errors "$GST10_PKGS") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_MIXER_CFLAGS=`$PKG_CONFIG --cflags "$GST10_PKGS" 2>/dev/null` + else + pkg_failed=yes +@@ -17166,11 +15229,11 @@ + pkg_cv_MIXER_LIBS="$MIXER_LIBS" + else + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$GST10_PKGS\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$GST10_PKGS\""; } >&5 + ($PKG_CONFIG --exists --print-errors "$GST10_PKGS") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + pkg_cv_MIXER_LIBS=`$PKG_CONFIG --libs "$GST10_PKGS" 2>/dev/null` + else + pkg_failed=yes +@@ -17197,7 +15260,7 @@ + # Put the nasty error message in config.log where it belongs + echo "$MIXER_PKG_ERRORS" >&5 + +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + HAVE_GST=no + elif test $pkg_failed = untried; then +@@ -17205,15 +15268,13 @@ + else + MIXER_CFLAGS=$pkg_cv_MIXER_CFLAGS + MIXER_LIBS=$pkg_cv_MIXER_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + HAVE_GST=yes + fi + if test "x$HAVE_GST" = "xno"; then + enable_mixer=no +- { { $as_echo "$as_me:$LINENO: error: Mixer applet explicitly requested but a compatible gstreamer version was not found" >&5 +-$as_echo "$as_me: error: Mixer applet explicitly requested but a compatible gstreamer version was not found" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "Mixer applet explicitly requested but a compatible gstreamer version was not found" "$LINENO" 5 + fi + fi + if test "x$enable_mixer" = "xyes"; then +@@ -17230,9 +15291,9 @@ + + # Extract the first word of "gdk-pixbuf-csource", so it can be a program name with args. + set dummy gdk-pixbuf-csource; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_GDK_PIXBUF_CSOURCE+set}" = set; then ++if test "${ac_cv_path_GDK_PIXBUF_CSOURCE+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + case $GDK_PIXBUF_CSOURCE in +@@ -17245,14 +15306,14 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_GDK_PIXBUF_CSOURCE="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + test -z "$ac_cv_path_GDK_PIXBUF_CSOURCE" && ac_cv_path_GDK_PIXBUF_CSOURCE="no" +@@ -17261,27 +15322,25 @@ + fi + GDK_PIXBUF_CSOURCE=$ac_cv_path_GDK_PIXBUF_CSOURCE + if test -n "$GDK_PIXBUF_CSOURCE"; then +- { $as_echo "$as_me:$LINENO: result: $GDK_PIXBUF_CSOURCE" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GDK_PIXBUF_CSOURCE" >&5 + $as_echo "$GDK_PIXBUF_CSOURCE" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + + + + if test x"$GDK_PIXBUF_CSOURCE" = xno; then +- { { $as_echo "$as_me:$LINENO: error: gdk-pixbuf-csource executable not found in your path - should be installed with GTK" >&5 +-$as_echo "$as_me: error: gdk-pixbuf-csource executable not found in your path - should be installed with GTK" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "gdk-pixbuf-csource executable not found in your path - should be installed with GTK" "$LINENO" 5 + fi + + + # Extract the first word of "glib-genmarshal", so it can be a program name with args. + set dummy glib-genmarshal; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_GLIB_GENMARSHAL+set}" = set; then ++if test "${ac_cv_path_GLIB_GENMARSHAL+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + case $GLIB_GENMARSHAL in +@@ -17294,14 +15353,14 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_GLIB_GENMARSHAL="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + ;; +@@ -17309,10 +15368,10 @@ + fi + GLIB_GENMARSHAL=$ac_cv_path_GLIB_GENMARSHAL + if test -n "$GLIB_GENMARSHAL"; then +- { $as_echo "$as_me:$LINENO: result: $GLIB_GENMARSHAL" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GLIB_GENMARSHAL" >&5 + $as_echo "$GLIB_GENMARSHAL" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -17320,9 +15379,9 @@ + + # Extract the first word of "gconftool-2", so it can be a program name with args. + set dummy gconftool-2; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_GCONFTOOL+set}" = set; then ++if test "${ac_cv_path_GCONFTOOL+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + case $GCONFTOOL in +@@ -17335,14 +15394,14 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_GCONFTOOL="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + test -z "$ac_cv_path_GCONFTOOL" && ac_cv_path_GCONFTOOL="no" +@@ -17351,25 +15410,23 @@ + fi + GCONFTOOL=$ac_cv_path_GCONFTOOL + if test -n "$GCONFTOOL"; then +- { $as_echo "$as_me:$LINENO: result: $GCONFTOOL" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GCONFTOOL" >&5 + $as_echo "$GCONFTOOL" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + + + if test x"$GCONFTOOL" = xno; then +- { { $as_echo "$as_me:$LINENO: error: gconftool-2 executable not found in your path - should be installed with GConf" >&5 +-$as_echo "$as_me: error: gconftool-2 executable not found in your path - should be installed with GConf" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "gconftool-2 executable not found in your path - should be installed with GConf" "$LINENO" 5 + fi + + # Extract the first word of "xsltproc", so it can be a program name with args. + set dummy xsltproc; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_XSLTPROC+set}" = set; then ++if test "${ac_cv_path_XSLTPROC+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + case $XSLTPROC in +@@ -17382,14 +15439,14 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_XSLTPROC="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + test -z "$ac_cv_path_XSLTPROC" && ac_cv_path_XSLTPROC="no" +@@ -17398,25 +15455,23 @@ + fi + XSLTPROC=$ac_cv_path_XSLTPROC + if test -n "$XSLTPROC"; then +- { $as_echo "$as_me:$LINENO: result: $XSLTPROC" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XSLTPROC" >&5 + $as_echo "$XSLTPROC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + + + if test x"$XSLTPROC" = xno; then +- { { $as_echo "$as_me:$LINENO: error: xsltproc executable not found in your path - should be installed with libxslt" >&5 +-$as_echo "$as_me: error: xsltproc executable not found in your path - should be installed with libxslt" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "xsltproc executable not found in your path - should be installed with libxslt" "$LINENO" 5 + fi + + # Extract the first word of "scrollkeeper-config", so it can be a program name with args. + set dummy scrollkeeper-config; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_SCROLLKEEPER_CONFIG+set}" = set; then ++if test "${ac_cv_path_SCROLLKEEPER_CONFIG+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + case $SCROLLKEEPER_CONFIG in +@@ -17429,14 +15484,14 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_SCROLLKEEPER_CONFIG="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + test -z "$ac_cv_path_SCROLLKEEPER_CONFIG" && ac_cv_path_SCROLLKEEPER_CONFIG="no" +@@ -17445,26 +15500,25 @@ + fi + SCROLLKEEPER_CONFIG=$ac_cv_path_SCROLLKEEPER_CONFIG + if test -n "$SCROLLKEEPER_CONFIG"; then +- { $as_echo "$as_me:$LINENO: result: $SCROLLKEEPER_CONFIG" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SCROLLKEEPER_CONFIG" >&5 + $as_echo "$SCROLLKEEPER_CONFIG" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + + + if test x$SCROLLKEEPER_CONFIG = xno; then +- { { $as_echo "$as_me:$LINENO: error: Couldn't find scrollkeeper-config" >&5 +-$as_echo "$as_me: error: Couldn't find scrollkeeper-config" >&2;} +- { (exit please install the Scrollkeeper 0.1.4 package); exit please install the Scrollkeeper 0.1.4 package; }; } ++ { as_fn_set_status please install the Scrollkeeper 0.1.4 package ++as_fn_error "Couldn't find scrollkeeper-config" "$LINENO" 5; } + fi + + + # Extract the first word of "jw", so it can be a program name with args. + set dummy jw; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_JW+set}" = set; then ++if test "${ac_cv_path_JW+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + case $JW in +@@ -17477,14 +15531,14 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_JW="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + test -z "$ac_cv_path_JW" && ac_cv_path_JW="no" +@@ -17493,10 +15547,10 @@ + fi + JW=$ac_cv_path_JW + if test -n "$JW"; then +- { $as_echo "$as_me:$LINENO: result: $JW" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $JW" >&5 + $as_echo "$JW" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +@@ -17525,13 +15579,13 @@ + + + # Check whether --with-gconf-source was given. +-if test "${with_gconf_source+set}" = set; then ++if test "${with_gconf_source+set}" = set; then : + withval=$with_gconf_source; GCONF_SCHEMA_CONFIG_SOURCE="$withval" + fi + + + +- { $as_echo "$as_me:$LINENO: result: Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation" >&5 + $as_echo "Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation" >&6; } + + if test "x$GCONF_SCHEMA_FILE_DIR" = "x"; then +@@ -17540,22 +15594,20 @@ + + + # Check whether --with-gconf-schema-file-dir was given. +-if test "${with_gconf_schema_file_dir+set}" = set; then ++if test "${with_gconf_schema_file_dir+set}" = set; then : + withval=$with_gconf_schema_file_dir; GCONF_SCHEMA_FILE_DIR="$withval" + fi + + + +- { $as_echo "$as_me:$LINENO: result: Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files" >&5 + $as_echo "Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files" >&6; } + + # Check whether --enable-schemas-install was given. +-if test "${enable_schemas_install+set}" = set; then ++if test "${enable_schemas_install+set}" = set; then : + enableval=$enable_schemas_install; case ${enableval} in + yes|no) ;; +- *) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-schemas-install" >&5 +-$as_echo "$as_me: error: bad value ${enableval} for --enable-schemas-install" >&2;} +- { (exit 1); exit 1; }; } ;; ++ *) as_fn_error "bad value ${enableval} for --enable-schemas-install" "$LINENO" 5 ;; + esac + fi + +@@ -17591,146 +15643,12 @@ + + + +- +-for ac_header in locale.h +-do +-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +-$as_echo_n "checking for $ac_header... " >&6; } +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 +-fi +-ac_res=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } +-else +- # Is the header compilable? +-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-$as_echo_n "checking $ac_header usability... " >&6; } +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_includes_default +-#include <$ac_header> +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_header_compiler=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_header_compiler=no +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-$as_echo "$ac_header_compiler" >&6; } +- +-# Is the header present? +-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-$as_echo_n "checking $ac_header presence... " >&6; } +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include <$ac_header> +-_ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || +- test ! -s conftest.err +- }; then +- ac_header_preproc=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_header_preproc=no +-fi +- +-rm -f conftest.err conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-$as_echo "$ac_header_preproc" >&6; } +- +-# So? What about this header? +-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +- yes:no: ) +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} +- ac_header_preproc=yes +- ;; +- no:yes:* ) +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +-$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +-$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +- +- ;; +-esac +-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +-$as_echo_n "checking for $ac_header... " >&6; } +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 +-else +- eval "$as_ac_Header=\$ac_header_preproc" +-fi +-ac_res=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } +- +-fi +-as_val=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- if test "x$as_val" = x""yes; then ++ for ac_header in locale.h ++do : ++ ac_fn_c_check_header_mongrel "$LINENO" "locale.h" "ac_cv_header_locale_h" "$ac_includes_default" ++if test "x$ac_cv_header_locale_h" = x""yes; then : + cat >>confdefs.h <<_ACEOF +-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++#define HAVE_LOCALE_H 1 + _ACEOF + + fi +@@ -17738,16 +15656,12 @@ + done + + if test $ac_cv_header_locale_h = yes; then +- { $as_echo "$as_me:$LINENO: checking for LC_MESSAGES" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for LC_MESSAGES" >&5 + $as_echo_n "checking for LC_MESSAGES... " >&6; } +-if test "${am_cv_val_LC_MESSAGES+set}" = set; then ++if test "${am_cv_val_LC_MESSAGES+set}" = set; then : + $as_echo_n "(cached) " >&6 + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + #include + int +@@ -17758,202 +15672,45 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + am_cv_val_LC_MESSAGES=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- am_cv_val_LC_MESSAGES=no ++ am_cv_val_LC_MESSAGES=no + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + fi +-{ $as_echo "$as_me:$LINENO: result: $am_cv_val_LC_MESSAGES" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_val_LC_MESSAGES" >&5 + $as_echo "$am_cv_val_LC_MESSAGES" >&6; } + if test $am_cv_val_LC_MESSAGES = yes; then + +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_LC_MESSAGES 1 +-_ACEOF ++$as_echo "#define HAVE_LC_MESSAGES 1" >>confdefs.h + + fi + fi +- USE_NLS=yes +- +- +- gt_cv_have_gettext=no +- +- CATOBJEXT=NONE +- XGETTEXT=: +- INTLLIBS= +- +- if test "${ac_cv_header_libintl_h+set}" = set; then +- { $as_echo "$as_me:$LINENO: checking for libintl.h" >&5 +-$as_echo_n "checking for libintl.h... " >&6; } +-if test "${ac_cv_header_libintl_h+set}" = set; then +- $as_echo_n "(cached) " >&6 +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_libintl_h" >&5 +-$as_echo "$ac_cv_header_libintl_h" >&6; } +-else +- # Is the header compilable? +-{ $as_echo "$as_me:$LINENO: checking libintl.h usability" >&5 +-$as_echo_n "checking libintl.h usability... " >&6; } +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_includes_default +-#include +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_header_compiler=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_header_compiler=no +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-$as_echo "$ac_header_compiler" >&6; } +- +-# Is the header present? +-{ $as_echo "$as_me:$LINENO: checking libintl.h presence" >&5 +-$as_echo_n "checking libintl.h presence... " >&6; } +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include +-_ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || +- test ! -s conftest.err +- }; then +- ac_header_preproc=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_header_preproc=no +-fi ++ USE_NLS=yes + +-rm -f conftest.err conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-$as_echo "$ac_header_preproc" >&6; } + +-# So? What about this header? +-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +- yes:no: ) +- { $as_echo "$as_me:$LINENO: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&5 +-$as_echo "$as_me: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the compiler's result" >&5 +-$as_echo "$as_me: WARNING: libintl.h: proceeding with the compiler's result" >&2;} +- ac_header_preproc=yes +- ;; +- no:yes:* ) +- { $as_echo "$as_me:$LINENO: WARNING: libintl.h: present but cannot be compiled" >&5 +-$as_echo "$as_me: WARNING: libintl.h: present but cannot be compiled" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: libintl.h: check for missing prerequisite headers?" >&5 +-$as_echo "$as_me: WARNING: libintl.h: check for missing prerequisite headers?" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: libintl.h: see the Autoconf documentation" >&5 +-$as_echo "$as_me: WARNING: libintl.h: see the Autoconf documentation" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: libintl.h: section \"Present But Cannot Be Compiled\"" >&5 +-$as_echo "$as_me: WARNING: libintl.h: section \"Present But Cannot Be Compiled\"" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the preprocessor's result" >&5 +-$as_echo "$as_me: WARNING: libintl.h: proceeding with the preprocessor's result" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: libintl.h: in the future, the compiler will take precedence" >&5 +-$as_echo "$as_me: WARNING: libintl.h: in the future, the compiler will take precedence" >&2;} ++ gt_cv_have_gettext=no + +- ;; +-esac +-{ $as_echo "$as_me:$LINENO: checking for libintl.h" >&5 +-$as_echo_n "checking for libintl.h... " >&6; } +-if test "${ac_cv_header_libintl_h+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- ac_cv_header_libintl_h=$ac_header_preproc +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_libintl_h" >&5 +-$as_echo "$ac_cv_header_libintl_h" >&6; } ++ CATOBJEXT=NONE ++ XGETTEXT=: ++ INTLLIBS= + +-fi +-if test "x$ac_cv_header_libintl_h" = x""yes; then ++ ac_fn_c_check_header_mongrel "$LINENO" "libintl.h" "ac_cv_header_libintl_h" "$ac_includes_default" ++if test "x$ac_cv_header_libintl_h" = x""yes; then : + gt_cv_func_dgettext_libintl="no" + libintl_extra_libs="" + + # + # First check in libc + # +- { $as_echo "$as_me:$LINENO: checking for ngettext in libc" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ngettext in libc" >&5 + $as_echo_n "checking for ngettext in libc... " >&6; } +-if test "${gt_cv_func_ngettext_libc+set}" = set; then ++if test "${gt_cv_func_ngettext_libc+set}" = set; then : + $as_echo_n "(cached) " >&6 + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + #include +@@ -17966,54 +15723,25 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + gt_cv_func_ngettext_libc=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- gt_cv_func_ngettext_libc=no ++ gt_cv_func_ngettext_libc=no + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + + fi +-{ $as_echo "$as_me:$LINENO: result: $gt_cv_func_ngettext_libc" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_ngettext_libc" >&5 + $as_echo "$gt_cv_func_ngettext_libc" >&6; } + + if test "$gt_cv_func_ngettext_libc" = "yes" ; then +- { $as_echo "$as_me:$LINENO: checking for dgettext in libc" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dgettext in libc" >&5 + $as_echo_n "checking for dgettext in libc... " >&6; } +-if test "${gt_cv_func_dgettext_libc+set}" = set; then ++if test "${gt_cv_func_dgettext_libc+set}" = set; then : + $as_echo_n "(cached) " >&6 + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + #include +@@ -18026,141 +15754,26 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + gt_cv_func_dgettext_libc=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- gt_cv_func_dgettext_libc=no ++ gt_cv_func_dgettext_libc=no + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + + fi +-{ $as_echo "$as_me:$LINENO: result: $gt_cv_func_dgettext_libc" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_dgettext_libc" >&5 + $as_echo "$gt_cv_func_dgettext_libc" >&6; } + fi + + if test "$gt_cv_func_ngettext_libc" = "yes" ; then +- +-for ac_func in bind_textdomain_codeset +-do +-as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +-{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 +-$as_echo_n "checking for $ac_func... " >&6; } +-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define $ac_func to an innocuous variant, in case declares $ac_func. +- For example, HP-UX 11i declares gettimeofday. */ +-#define $ac_func innocuous_$ac_func +- +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char $ac_func (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ +- +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif +- +-#undef $ac_func +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char $ac_func (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_$ac_func || defined __stub___$ac_func +-choke me +-#endif +- +-int +-main () +-{ +-return $ac_func (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- eval "$as_ac_var=yes" +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- eval "$as_ac_var=no" +-fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-ac_res=`eval 'as_val=${'$as_ac_var'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } +-as_val=`eval 'as_val=${'$as_ac_var'} +- $as_echo "$as_val"'` +- if test "x$as_val" = x""yes; then ++ for ac_func in bind_textdomain_codeset ++do : ++ ac_fn_c_check_func "$LINENO" "bind_textdomain_codeset" "ac_cv_func_bind_textdomain_codeset" ++if test "x$ac_cv_func_bind_textdomain_codeset" = x""yes; then : + cat >>confdefs.h <<_ACEOF +-#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 ++#define HAVE_BIND_TEXTDOMAIN_CODESET 1 + _ACEOF + + fi +@@ -18175,18 +15788,14 @@ + || test "$gt_cv_func_ngettext_libc" != "yes" \ + || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then + +- { $as_echo "$as_me:$LINENO: checking for bindtextdomain in -lintl" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for bindtextdomain in -lintl" >&5 + $as_echo_n "checking for bindtextdomain in -lintl... " >&6; } +-if test "${ac_cv_lib_intl_bindtextdomain+set}" = set; then ++if test "${ac_cv_lib_intl_bindtextdomain+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lintl $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + /* Override any GCC internal prototype to avoid an error. +@@ -18204,55 +15813,26 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_intl_bindtextdomain=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_intl_bindtextdomain=no ++ ac_cv_lib_intl_bindtextdomain=no + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_intl_bindtextdomain" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_bindtextdomain" >&5 + $as_echo "$ac_cv_lib_intl_bindtextdomain" >&6; } +-if test "x$ac_cv_lib_intl_bindtextdomain" = x""yes; then +- { $as_echo "$as_me:$LINENO: checking for ngettext in -lintl" >&5 ++if test "x$ac_cv_lib_intl_bindtextdomain" = x""yes; then : ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ngettext in -lintl" >&5 + $as_echo_n "checking for ngettext in -lintl... " >&6; } +-if test "${ac_cv_lib_intl_ngettext+set}" = set; then ++if test "${ac_cv_lib_intl_ngettext+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lintl $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + /* Override any GCC internal prototype to avoid an error. +@@ -18270,55 +15850,26 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_intl_ngettext=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_intl_ngettext=no ++ ac_cv_lib_intl_ngettext=no + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_intl_ngettext" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_ngettext" >&5 + $as_echo "$ac_cv_lib_intl_ngettext" >&6; } +-if test "x$ac_cv_lib_intl_ngettext" = x""yes; then +- { $as_echo "$as_me:$LINENO: checking for dgettext in -lintl" >&5 ++if test "x$ac_cv_lib_intl_ngettext" = x""yes; then : ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dgettext in -lintl" >&5 + $as_echo_n "checking for dgettext in -lintl... " >&6; } +-if test "${ac_cv_lib_intl_dgettext+set}" = set; then ++if test "${ac_cv_lib_intl_dgettext+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lintl $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + /* Override any GCC internal prototype to avoid an error. +@@ -18336,43 +15887,18 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_intl_dgettext=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_intl_dgettext=no ++ ac_cv_lib_intl_dgettext=no + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_intl_dgettext" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_dgettext" >&5 + $as_echo "$ac_cv_lib_intl_dgettext" >&6; } +-if test "x$ac_cv_lib_intl_dgettext" = x""yes; then ++if test "x$ac_cv_lib_intl_dgettext" = x""yes; then : + gt_cv_func_dgettext_libintl=yes + fi + +@@ -18382,22 +15908,18 @@ + + + if test "$gt_cv_func_dgettext_libintl" != "yes" ; then +- { $as_echo "$as_me:$LINENO: checking if -liconv is needed to use gettext" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if -liconv is needed to use gettext" >&5 + $as_echo_n "checking if -liconv is needed to use gettext... " >&6; } +- { $as_echo "$as_me:$LINENO: result: " >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: " >&5 + $as_echo "" >&6; } +- { $as_echo "$as_me:$LINENO: checking for ngettext in -lintl" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ngettext in -lintl" >&5 + $as_echo_n "checking for ngettext in -lintl... " >&6; } +-if test "${ac_cv_lib_intl_ngettext+set}" = set; then ++if test "${ac_cv_lib_intl_ngettext+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lintl -liconv $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + /* Override any GCC internal prototype to avoid an error. +@@ -18415,161 +15937,27 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_intl_ngettext=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_intl_ngettext=no +-fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_intl_ngettext" >&5 +-$as_echo "$ac_cv_lib_intl_ngettext" >&6; } +-if test "x$ac_cv_lib_intl_ngettext" = x""yes; then +- { $as_echo "$as_me:$LINENO: checking for dcgettext in -lintl" >&5 +-$as_echo_n "checking for dcgettext in -lintl... " >&6; } +-if test "${ac_cv_lib_intl_dcgettext+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lintl -liconv $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char dcgettext (); +-int +-main () +-{ +-return dcgettext (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_lib_intl_dcgettext=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_intl_dcgettext=no +-fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_intl_dcgettext" >&5 +-$as_echo "$ac_cv_lib_intl_dcgettext" >&6; } +-if test "x$ac_cv_lib_intl_dcgettext" = x""yes; then +- gt_cv_func_dgettext_libintl=yes +- libintl_extra_libs=-liconv +-else +- : +-fi +- +-else +- : ++ ac_cv_lib_intl_ngettext=no + fi +- +- fi +- +- # +- # If we found libintl, then check in it for bind_textdomain_codeset(); +- # we'll prefer libc if neither have bind_textdomain_codeset(), +- # and both have dgettext and ngettext +- # +- if test "$gt_cv_func_dgettext_libintl" = "yes" ; then +- glib_save_LIBS="$LIBS" +- LIBS="$LIBS -lintl $libintl_extra_libs" +- unset ac_cv_func_bind_textdomain_codeset +- +-for ac_func in bind_textdomain_codeset +-do +-as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +-{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 +-$as_echo_n "checking for $ac_func... " >&6; } +-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define $ac_func to an innocuous variant, in case declares $ac_func. +- For example, HP-UX 11i declares gettimeofday. */ +-#define $ac_func innocuous_$ac_func +- +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char $ac_func (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ +- +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif +- +-#undef $ac_func ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_ngettext" >&5 ++$as_echo "$ac_cv_lib_intl_ngettext" >&6; } ++if test "x$ac_cv_lib_intl_ngettext" = x""yes; then : ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dcgettext in -lintl" >&5 ++$as_echo_n "checking for dcgettext in -lintl... " >&6; } ++if test "${ac_cv_lib_intl_dcgettext+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lintl -liconv $LIBS" ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + + /* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC +@@ -18577,64 +15965,54 @@ + #ifdef __cplusplus + extern "C" + #endif +-char $ac_func (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_$ac_func || defined __stub___$ac_func +-choke me +-#endif +- ++char dcgettext (); + int + main () + { +-return $ac_func (); ++return dcgettext (); + ; + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- eval "$as_ac_var=yes" ++if ac_fn_c_try_link "$LINENO"; then : ++ ac_cv_lib_intl_dcgettext=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- eval "$as_ac_var=no" ++ ac_cv_lib_intl_dcgettext=no ++fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_dcgettext" >&5 ++$as_echo "$ac_cv_lib_intl_dcgettext" >&6; } ++if test "x$ac_cv_lib_intl_dcgettext" = x""yes; then : ++ gt_cv_func_dgettext_libintl=yes ++ libintl_extra_libs=-liconv ++else ++ : + fi + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++else ++ : + fi +-ac_res=`eval 'as_val=${'$as_ac_var'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } +-as_val=`eval 'as_val=${'$as_ac_var'} +- $as_echo "$as_val"'` +- if test "x$as_val" = x""yes; then ++ ++ fi ++ ++ # ++ # If we found libintl, then check in it for bind_textdomain_codeset(); ++ # we'll prefer libc if neither have bind_textdomain_codeset(), ++ # and both have dgettext and ngettext ++ # ++ if test "$gt_cv_func_dgettext_libintl" = "yes" ; then ++ glib_save_LIBS="$LIBS" ++ LIBS="$LIBS -lintl $libintl_extra_libs" ++ unset ac_cv_func_bind_textdomain_codeset ++ for ac_func in bind_textdomain_codeset ++do : ++ ac_fn_c_check_func "$LINENO" "bind_textdomain_codeset" "ac_cv_func_bind_textdomain_codeset" ++if test "x$ac_cv_func_bind_textdomain_codeset" = x""yes; then : + cat >>confdefs.h <<_ACEOF +-#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 ++#define HAVE_BIND_TEXTDOMAIN_CODESET 1 + _ACEOF + + fi +@@ -18664,15 +16042,13 @@ + + if test "$gt_cv_have_gettext" = "yes"; then + +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_GETTEXT 1 +-_ACEOF ++$as_echo "#define HAVE_GETTEXT 1" >>confdefs.h + + # Extract the first word of "msgfmt", so it can be a program name with args. + set dummy msgfmt; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_MSGFMT+set}" = set; then ++if test "${ac_cv_path_MSGFMT+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + case "$MSGFMT" in +@@ -18697,118 +16073,28 @@ + fi + MSGFMT="$ac_cv_path_MSGFMT" + if test "$MSGFMT" != "no"; then +- { $as_echo "$as_me:$LINENO: result: $MSGFMT" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5 + $as_echo "$MSGFMT" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + if test "$MSGFMT" != "no"; then + glib_save_LIBS="$LIBS" + LIBS="$LIBS $INTLLIBS" +- +-for ac_func in dcgettext +-do +-as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +-{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 +-$as_echo_n "checking for $ac_func... " >&6; } +-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define $ac_func to an innocuous variant, in case declares $ac_func. +- For example, HP-UX 11i declares gettimeofday. */ +-#define $ac_func innocuous_$ac_func +- +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char $ac_func (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ +- +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif +- +-#undef $ac_func +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char $ac_func (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_$ac_func || defined __stub___$ac_func +-choke me +-#endif +- +-int +-main () +-{ +-return $ac_func (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- eval "$as_ac_var=yes" +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- eval "$as_ac_var=no" +-fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-ac_res=`eval 'as_val=${'$as_ac_var'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } +-as_val=`eval 'as_val=${'$as_ac_var'} +- $as_echo "$as_val"'` +- if test "x$as_val" = x""yes; then ++ for ac_func in dcgettext ++do : ++ ac_fn_c_check_func "$LINENO" "dcgettext" "ac_cv_func_dcgettext" ++if test "x$ac_cv_func_dcgettext" = x""yes; then : + cat >>confdefs.h <<_ACEOF +-#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 ++#define HAVE_DCGETTEXT 1 + _ACEOF + + fi + done + + MSGFMT_OPTS= +- { $as_echo "$as_me:$LINENO: checking if msgfmt accepts -c" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if msgfmt accepts -c" >&5 + $as_echo_n "checking if msgfmt accepts -c... " >&6; } + cat >conftest.foo <<_ACEOF + +@@ -18823,14 +16109,14 @@ + "Content-Transfer-Encoding: 8bit\n" + + _ACEOF +-if { ($as_echo "$as_me:$LINENO: \$MSGFMT -c -o /dev/null conftest.foo") >&5 ++if { { $as_echo "$as_me:${as_lineno-$LINENO}: \$MSGFMT -c -o /dev/null conftest.foo"; } >&5 + ($MSGFMT -c -o /dev/null conftest.foo) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- MSGFMT_OPTS=-c; { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then ++ MSGFMT_OPTS=-c; { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } +-else { $as_echo "$as_me:$LINENO: result: no" >&5 ++else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + echo "$as_me: failed input was:" >&5 + sed 's/^/| /' conftest.foo >&5 +@@ -18838,9 +16124,9 @@ + + # Extract the first word of "gmsgfmt", so it can be a program name with args. + set dummy gmsgfmt; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_GMSGFMT+set}" = set; then ++if test "${ac_cv_path_GMSGFMT+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + case $GMSGFMT in +@@ -18853,14 +16139,14 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" +@@ -18869,19 +16155,19 @@ + fi + GMSGFMT=$ac_cv_path_GMSGFMT + if test -n "$GMSGFMT"; then +- { $as_echo "$as_me:$LINENO: result: $GMSGFMT" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5 + $as_echo "$GMSGFMT" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + + + # Extract the first word of "xgettext", so it can be a program name with args. + set dummy xgettext; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_XGETTEXT+set}" = set; then ++if test "${ac_cv_path_XGETTEXT+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + case "$XGETTEXT" in +@@ -18906,18 +16192,14 @@ + fi + XGETTEXT="$ac_cv_path_XGETTEXT" + if test "$XGETTEXT" != ":"; then +- { $as_echo "$as_me:$LINENO: result: $XGETTEXT" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5 + $as_echo "$XGETTEXT" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -18929,121 +16211,14 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + CATOBJEXT=.gmo + DATADIRNAME=share + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- case $host in ++ case $host in + *-*-solaris*) +- { $as_echo "$as_me:$LINENO: checking for bind_textdomain_codeset" >&5 +-$as_echo_n "checking for bind_textdomain_codeset... " >&6; } +-if test "${ac_cv_func_bind_textdomain_codeset+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define bind_textdomain_codeset to an innocuous variant, in case declares bind_textdomain_codeset. +- For example, HP-UX 11i declares gettimeofday. */ +-#define bind_textdomain_codeset innocuous_bind_textdomain_codeset +- +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char bind_textdomain_codeset (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ +- +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif +- +-#undef bind_textdomain_codeset +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char bind_textdomain_codeset (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_bind_textdomain_codeset || defined __stub___bind_textdomain_codeset +-choke me +-#endif +- +-int +-main () +-{ +-return bind_textdomain_codeset (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_func_bind_textdomain_codeset=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_func_bind_textdomain_codeset=no +-fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_bind_textdomain_codeset" >&5 +-$as_echo "$ac_cv_func_bind_textdomain_codeset" >&6; } +-if test "x$ac_cv_func_bind_textdomain_codeset" = x""yes; then ++ ac_fn_c_check_func "$LINENO" "bind_textdomain_codeset" "ac_cv_func_bind_textdomain_codeset" ++if test "x$ac_cv_func_bind_textdomain_codeset" = x""yes; then : + CATOBJEXT=.gmo + DATADIRNAME=share + else +@@ -19058,10 +16233,8 @@ + ;; + esac + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + LIBS="$glib_save_LIBS" + INSTOBJEXT=.mo + else +@@ -19075,9 +16248,7 @@ + + if test "$gt_cv_have_gettext" = "yes" ; then + +-cat >>confdefs.h <<\_ACEOF +-#define ENABLE_NLS 1 +-_ACEOF ++$as_echo "#define ENABLE_NLS 1" >>confdefs.h + + fi + +@@ -19085,7 +16256,7 @@ + if $XGETTEXT --omit-header /dev/null 2> /dev/null; then + : ; + else +- { $as_echo "$as_me:$LINENO: result: found xgettext program is not GNU xgettext; ignore it" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: found xgettext program is not GNU xgettext; ignore it" >&5 + $as_echo "found xgettext program is not GNU xgettext; ignore it" >&6; } + XGETTEXT=":" + fi +@@ -19118,7 +16289,7 @@ + if test "x$ALL_LINGUAS" = "x"; then + LINGUAS= + else +- { $as_echo "$as_me:$LINENO: checking for catalogs to be installed" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for catalogs to be installed" >&5 + $as_echo_n "checking for catalogs to be installed... " >&6; } + NEW_LINGUAS= + for presentlang in $ALL_LINGUAS; do +@@ -19143,7 +16314,7 @@ + fi + done + LINGUAS=$NEW_LINGUAS +- { $as_echo "$as_me:$LINENO: result: $LINGUAS" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LINGUAS" >&5 + $as_echo "$LINGUAS" >&6; } + fi + +@@ -19184,11 +16355,11 @@ + gdu_cv_version_required=0.3.2 + + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gnome-doc-utils >= \$gdu_cv_version_required\"") >&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gnome-doc-utils >= \$gdu_cv_version_required\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gnome-doc-utils >= $gdu_cv_version_required") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + gdu_cv_have_gdu=yes + else + gdu_cv_have_gdu=no +@@ -19197,15 +16368,13 @@ + if test "$gdu_cv_have_gdu" = "yes"; then + : + else +- { { $as_echo "$as_me:$LINENO: error: gnome-doc-utils >= $gdu_cv_version_required not found" >&5 +-$as_echo "$as_me: error: gnome-doc-utils >= $gdu_cv_version_required not found" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "gnome-doc-utils >= $gdu_cv_version_required not found" "$LINENO" 5 + fi + + + + # Check whether --with-help-dir was given. +-if test "${with_help_dir+set}" = set; then ++if test "${with_help_dir+set}" = set; then : + withval=$with_help_dir; + else + with_help_dir='${datadir}/gnome/help' +@@ -19216,7 +16385,7 @@ + + + # Check whether --with-omf-dir was given. +-if test "${with_omf_dir+set}" = set; then ++if test "${with_omf_dir+set}" = set; then : + withval=$with_omf_dir; + else + with_omf_dir='${datadir}/omf' +@@ -19227,7 +16396,7 @@ + + + # Check whether --with-help-formats was given. +-if test "${with_help_formats+set}" = set; then ++if test "${with_help_formats+set}" = set; then : + withval=$with_help_formats; + else + with_help_formats='' +@@ -19237,7 +16406,7 @@ + + + # Check whether --enable-scrollkeeper was given. +-if test "${enable_scrollkeeper+set}" = set; then ++if test "${enable_scrollkeeper+set}" = set; then : + enableval=$enable_scrollkeeper; + else + enable_scrollkeeper=yes +@@ -19268,7 +16437,7 @@ + + + # Check whether --enable-flags was given. +-if test "${enable_flags+set}" = set; then ++if test "${enable_flags+set}" = set; then : + enableval=$enable_flags; + else + enable_flags=no +@@ -19297,160 +16466,27 @@ + + + +-# Check whether --enable-battstat was given. +-if test "${enable_battstat+set}" = set; then +- enableval=$enable_battstat; +-else +- disable_battstat=no +-fi +- +- +-HAVE_LIBAPM=no +-NEED_LIBAPM=no +-ACPIINC= +-build_battstat_applet=no +- +-if test x$disable_battstat = xno; then +- build_battstat_applet=yes +- +- +-for ac_header in err.h sys/sysctl.h +-do +-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +-$as_echo_n "checking for $ac_header... " >&6; } +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 +-fi +-ac_res=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } +-else +- # Is the header compilable? +-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-$as_echo_n "checking $ac_header usability... " >&6; } +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_includes_default +-#include <$ac_header> +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_header_compiler=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_header_compiler=no +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-$as_echo "$ac_header_compiler" >&6; } +- +-# Is the header present? +-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-$as_echo_n "checking $ac_header presence... " >&6; } +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include <$ac_header> +-_ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || +- test ! -s conftest.err +- }; then +- ac_header_preproc=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_header_preproc=no +-fi +- +-rm -f conftest.err conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-$as_echo "$ac_header_preproc" >&6; } +- +-# So? What about this header? +-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +- yes:no: ) +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} +- ac_header_preproc=yes +- ;; +- no:yes:* ) +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +-$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +-$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +- +- ;; +-esac +-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +-$as_echo_n "checking for $ac_header... " >&6; } +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 ++# Check whether --enable-battstat was given. ++if test "${enable_battstat+set}" = set; then : ++ enableval=$enable_battstat; + else +- eval "$as_ac_Header=\$ac_header_preproc" ++ disable_battstat=no + fi +-ac_res=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } + +-fi +-as_val=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- if test "x$as_val" = x""yes; then ++ ++HAVE_LIBAPM=no ++NEED_LIBAPM=no ++ACPIINC= ++build_battstat_applet=no ++ ++if test x$disable_battstat = xno; then ++ build_battstat_applet=yes ++ for ac_header in err.h sys/sysctl.h ++do : ++ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ++ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" ++eval as_val=\$$as_ac_Header ++ if test "x$as_val" = x""yes; then : + cat >>confdefs.h <<_ACEOF + #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 + _ACEOF +@@ -19462,18 +16498,14 @@ + case "${host}" in + powerpc-*-linux*) + NEED_LIBAPM=yes +- { $as_echo "$as_me:$LINENO: checking for apm_read in -lapm" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for apm_read in -lapm" >&5 + $as_echo_n "checking for apm_read in -lapm... " >&6; } +-if test "${ac_cv_lib_apm_apm_read+set}" = set; then ++if test "${ac_cv_lib_apm_apm_read+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lapm $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + /* Override any GCC internal prototype to avoid an error. +@@ -19491,43 +16523,18 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_apm_apm_read=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_apm_apm_read=no ++ ac_cv_lib_apm_apm_read=no + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_apm_apm_read" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_apm_apm_read" >&5 + $as_echo "$ac_cv_lib_apm_apm_read" >&6; } +-if test "x$ac_cv_lib_apm_apm_read" = x""yes; then ++if test "x$ac_cv_lib_apm_apm_read" = x""yes; then : + HAVE_LIBAPM=yes + else + HAVE_LIBAPM=no +@@ -19537,18 +16544,14 @@ + # list of supported OS cores that use libapm + *-*-linux*) + NEED_LIBAPM=yes +- { $as_echo "$as_me:$LINENO: checking for apm_read in -lapm" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for apm_read in -lapm" >&5 + $as_echo_n "checking for apm_read in -lapm... " >&6; } +-if test "${ac_cv_lib_apm_apm_read+set}" = set; then ++if test "${ac_cv_lib_apm_apm_read+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lapm $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + /* Override any GCC internal prototype to avoid an error. +@@ -19566,43 +16569,18 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_apm_apm_read=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_apm_apm_read=no ++ ac_cv_lib_apm_apm_read=no + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_apm_apm_read" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_apm_apm_read" >&5 + $as_echo "$ac_cv_lib_apm_apm_read" >&6; } +-if test "x$ac_cv_lib_apm_apm_read" = x""yes; then ++if test "x$ac_cv_lib_apm_apm_read" = x""yes; then : + HAVE_LIBAPM=yes + else + HAVE_LIBAPM=no +@@ -19619,134 +16597,8 @@ + + savecppflags=$CPPFLAGS + CPPFLAGS="$CPPFLAGS $ACPIINC" +- if test "${ac_cv_header_dev_acpica_acpiio_h+set}" = set; then +- { $as_echo "$as_me:$LINENO: checking for dev/acpica/acpiio.h" >&5 +-$as_echo_n "checking for dev/acpica/acpiio.h... " >&6; } +-if test "${ac_cv_header_dev_acpica_acpiio_h+set}" = set; then +- $as_echo_n "(cached) " >&6 +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_dev_acpica_acpiio_h" >&5 +-$as_echo "$ac_cv_header_dev_acpica_acpiio_h" >&6; } +-else +- # Is the header compilable? +-{ $as_echo "$as_me:$LINENO: checking dev/acpica/acpiio.h usability" >&5 +-$as_echo_n "checking dev/acpica/acpiio.h usability... " >&6; } +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_includes_default +-#include +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_header_compiler=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_header_compiler=no +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-$as_echo "$ac_header_compiler" >&6; } +- +-# Is the header present? +-{ $as_echo "$as_me:$LINENO: checking dev/acpica/acpiio.h presence" >&5 +-$as_echo_n "checking dev/acpica/acpiio.h presence... " >&6; } +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include +-_ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || +- test ! -s conftest.err +- }; then +- ac_header_preproc=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_header_preproc=no +-fi +- +-rm -f conftest.err conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-$as_echo "$ac_header_preproc" >&6; } +- +-# So? What about this header? +-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +- yes:no: ) +- { $as_echo "$as_me:$LINENO: WARNING: dev/acpica/acpiio.h: accepted by the compiler, rejected by the preprocessor!" >&5 +-$as_echo "$as_me: WARNING: dev/acpica/acpiio.h: accepted by the compiler, rejected by the preprocessor!" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: dev/acpica/acpiio.h: proceeding with the compiler's result" >&5 +-$as_echo "$as_me: WARNING: dev/acpica/acpiio.h: proceeding with the compiler's result" >&2;} +- ac_header_preproc=yes +- ;; +- no:yes:* ) +- { $as_echo "$as_me:$LINENO: WARNING: dev/acpica/acpiio.h: present but cannot be compiled" >&5 +-$as_echo "$as_me: WARNING: dev/acpica/acpiio.h: present but cannot be compiled" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: dev/acpica/acpiio.h: check for missing prerequisite headers?" >&5 +-$as_echo "$as_me: WARNING: dev/acpica/acpiio.h: check for missing prerequisite headers?" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: dev/acpica/acpiio.h: see the Autoconf documentation" >&5 +-$as_echo "$as_me: WARNING: dev/acpica/acpiio.h: see the Autoconf documentation" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: dev/acpica/acpiio.h: section \"Present But Cannot Be Compiled\"" >&5 +-$as_echo "$as_me: WARNING: dev/acpica/acpiio.h: section \"Present But Cannot Be Compiled\"" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: dev/acpica/acpiio.h: proceeding with the preprocessor's result" >&5 +-$as_echo "$as_me: WARNING: dev/acpica/acpiio.h: proceeding with the preprocessor's result" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: dev/acpica/acpiio.h: in the future, the compiler will take precedence" >&5 +-$as_echo "$as_me: WARNING: dev/acpica/acpiio.h: in the future, the compiler will take precedence" >&2;} +- +- ;; +-esac +-{ $as_echo "$as_me:$LINENO: checking for dev/acpica/acpiio.h" >&5 +-$as_echo_n "checking for dev/acpica/acpiio.h... " >&6; } +-if test "${ac_cv_header_dev_acpica_acpiio_h+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- ac_cv_header_dev_acpica_acpiio_h=$ac_header_preproc +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_dev_acpica_acpiio_h" >&5 +-$as_echo "$ac_cv_header_dev_acpica_acpiio_h" >&6; } +- +-fi +-if test "x$ac_cv_header_dev_acpica_acpiio_h" = x""yes; then ++ ac_fn_c_check_header_mongrel "$LINENO" "dev/acpica/acpiio.h" "ac_cv_header_dev_acpica_acpiio_h" "$ac_includes_default" ++if test "x$ac_cv_header_dev_acpica_acpiio_h" = x""yes; then : + have_acpiio=true + else + have_acpiio=false +@@ -19755,9 +16607,7 @@ + + if test $have_acpiio = true; then + +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_ACPIIO 1 +-_ACEOF ++$as_echo "#define HAVE_ACPIIO 1" >>confdefs.h + + fi + +@@ -19798,7 +16648,7 @@ + + + # Check whether --enable-mini-commander was given. +-if test "${enable_mini_commander+set}" = set; then ++if test "${enable_mini_commander+set}" = set; then : + enableval=$enable_mini_commander; enable_mini_commander="yes" + else + enable_mini_commander="no" +@@ -19828,134 +16678,8 @@ + + savecppflags=$CPPFLAGS + CPPFLAGS="$CPPFLAGS $X_CFLAGS" +-if test "${ac_cv_header_X11_extensions_XKB_h+set}" = set; then +- { $as_echo "$as_me:$LINENO: checking for X11/extensions/XKB.h" >&5 +-$as_echo_n "checking for X11/extensions/XKB.h... " >&6; } +-if test "${ac_cv_header_X11_extensions_XKB_h+set}" = set; then +- $as_echo_n "(cached) " >&6 +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_X11_extensions_XKB_h" >&5 +-$as_echo "$ac_cv_header_X11_extensions_XKB_h" >&6; } +-else +- # Is the header compilable? +-{ $as_echo "$as_me:$LINENO: checking X11/extensions/XKB.h usability" >&5 +-$as_echo_n "checking X11/extensions/XKB.h usability... " >&6; } +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_includes_default +-#include +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_header_compiler=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_header_compiler=no +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-$as_echo "$ac_header_compiler" >&6; } +- +-# Is the header present? +-{ $as_echo "$as_me:$LINENO: checking X11/extensions/XKB.h presence" >&5 +-$as_echo_n "checking X11/extensions/XKB.h presence... " >&6; } +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include +-_ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || +- test ! -s conftest.err +- }; then +- ac_header_preproc=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_header_preproc=no +-fi +- +-rm -f conftest.err conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-$as_echo "$ac_header_preproc" >&6; } +- +-# So? What about this header? +-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +- yes:no: ) +- { $as_echo "$as_me:$LINENO: WARNING: X11/extensions/XKB.h: accepted by the compiler, rejected by the preprocessor!" >&5 +-$as_echo "$as_me: WARNING: X11/extensions/XKB.h: accepted by the compiler, rejected by the preprocessor!" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: X11/extensions/XKB.h: proceeding with the compiler's result" >&5 +-$as_echo "$as_me: WARNING: X11/extensions/XKB.h: proceeding with the compiler's result" >&2;} +- ac_header_preproc=yes +- ;; +- no:yes:* ) +- { $as_echo "$as_me:$LINENO: WARNING: X11/extensions/XKB.h: present but cannot be compiled" >&5 +-$as_echo "$as_me: WARNING: X11/extensions/XKB.h: present but cannot be compiled" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: X11/extensions/XKB.h: check for missing prerequisite headers?" >&5 +-$as_echo "$as_me: WARNING: X11/extensions/XKB.h: check for missing prerequisite headers?" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: X11/extensions/XKB.h: see the Autoconf documentation" >&5 +-$as_echo "$as_me: WARNING: X11/extensions/XKB.h: see the Autoconf documentation" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: X11/extensions/XKB.h: section \"Present But Cannot Be Compiled\"" >&5 +-$as_echo "$as_me: WARNING: X11/extensions/XKB.h: section \"Present But Cannot Be Compiled\"" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: X11/extensions/XKB.h: proceeding with the preprocessor's result" >&5 +-$as_echo "$as_me: WARNING: X11/extensions/XKB.h: proceeding with the preprocessor's result" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: X11/extensions/XKB.h: in the future, the compiler will take precedence" >&5 +-$as_echo "$as_me: WARNING: X11/extensions/XKB.h: in the future, the compiler will take precedence" >&2;} +- +- ;; +-esac +-{ $as_echo "$as_me:$LINENO: checking for X11/extensions/XKB.h" >&5 +-$as_echo_n "checking for X11/extensions/XKB.h... " >&6; } +-if test "${ac_cv_header_X11_extensions_XKB_h+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- ac_cv_header_X11_extensions_XKB_h=$ac_header_preproc +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_X11_extensions_XKB_h" >&5 +-$as_echo "$ac_cv_header_X11_extensions_XKB_h" >&6; } +- +-fi +-if test "x$ac_cv_header_X11_extensions_XKB_h" = x""yes; then ++ac_fn_c_check_header_mongrel "$LINENO" "X11/extensions/XKB.h" "ac_cv_header_X11_extensions_XKB_h" "$ac_includes_default" ++if test "x$ac_cv_header_X11_extensions_XKB_h" = x""yes; then : + HAVE_XKB=true + else + HAVE_XKB=false +@@ -19973,7 +16697,7 @@ + fi + + if test "x$APPLET_ACCESSX" = "xtrue"; then +- { $as_echo "$as_me:$LINENO: WARNING: *** keyboard accessibility status applet will not be built ***" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: *** keyboard accessibility status applet will not be built ***" >&5 + $as_echo "$as_me: WARNING: *** keyboard accessibility status applet will not be built ***" >&2;} + fi + CPPFLAGS=$savecppflags +@@ -19984,9 +16708,9 @@ + + # Extract the first word of "su", so it can be a program name with args. + set dummy su; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_SU_TOOL+set}" = set; then ++if test "${ac_cv_path_SU_TOOL+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + case $SU_TOOL in +@@ -19999,14 +16723,14 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_SU_TOOL="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + ;; +@@ -20014,26 +16738,22 @@ + fi + SU_TOOL=$ac_cv_path_SU_TOOL + if test -n "$SU_TOOL"; then +- { $as_echo "$as_me:$LINENO: result: $SU_TOOL" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SU_TOOL" >&5 + $as_echo "$SU_TOOL" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + fi + + +-{ $as_echo "$as_me:$LINENO: checking for forkpty in -lutil" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for forkpty in -lutil" >&5 + $as_echo_n "checking for forkpty in -lutil... " >&6; } +-if test "${ac_cv_lib_util_forkpty+set}" = set; then ++if test "${ac_cv_lib_util_forkpty+set}" = set; then : + $as_echo_n "(cached) " >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lutil $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + /* Override any GCC internal prototype to avoid an error. +@@ -20051,219 +16771,68 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_util_forkpty=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_util_forkpty=no ++ ac_cv_lib_util_forkpty=no + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_util_forkpty" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_util_forkpty" >&5 + $as_echo "$ac_cv_lib_util_forkpty" >&6; } +-if test "x$ac_cv_lib_util_forkpty" = x""yes; then +- HAVE_LIBUTIL=true +-else +- HAVE_LIBUTIL=false +-fi +- +- +- { $as_echo "$as_me:$LINENO: WARNING: *** modemlights applet will not be built ***" >&5 +-$as_echo "$as_me: WARNING: *** modemlights applet will not be built ***" >&2;} +- BUILD_MODEM_LIGHTS=no +- +- if test "x$BUILD_MODEM_LIGHTS" = "xyes"; then +- APPLET_MODEMLIGHTS_TRUE= +- APPLET_MODEMLIGHTS_FALSE='#' +-else +- APPLET_MODEMLIGHTS_TRUE='#' +- APPLET_MODEMLIGHTS_FALSE= +-fi +- +- +- +-# Check whether --enable-cpufreq was given. +-if test "${enable_cpufreq+set}" = set; then +- enableval=$enable_cpufreq; +-else +- disable_cpufreq=no +-fi +- +- +-# Check whether --enable-frequency-selector was given. +-if test "${enable_frequency_selector+set}" = set; then +- enableval=$enable_frequency_selector; +-else +- enable_selector=yes +-fi +- +- +-# Check whether --enable-suid was given. +-if test "${enable_suid+set}" = set; then +- enableval=$enable_suid; +-else +- suid=yes +-fi +- +- +-if test "x$HAVE_POLKIT" = "xyes"; then +- suid=no +-fi +- +-if test "${ac_cv_header_cpufreq_h+set}" = set; then +- { $as_echo "$as_me:$LINENO: checking for cpufreq.h" >&5 +-$as_echo_n "checking for cpufreq.h... " >&6; } +-if test "${ac_cv_header_cpufreq_h+set}" = set; then +- $as_echo_n "(cached) " >&6 +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_cpufreq_h" >&5 +-$as_echo "$ac_cv_header_cpufreq_h" >&6; } +-else +- # Is the header compilable? +-{ $as_echo "$as_me:$LINENO: checking cpufreq.h usability" >&5 +-$as_echo_n "checking cpufreq.h usability... " >&6; } +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_includes_default +-#include +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_header_compiler=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_header_compiler=no ++if test "x$ac_cv_lib_util_forkpty" = x""yes; then : ++ HAVE_LIBUTIL=true ++else ++ HAVE_LIBUTIL=false + fi + +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-$as_echo "$ac_header_compiler" >&6; } + +-# Is the header present? +-{ $as_echo "$as_me:$LINENO: checking cpufreq.h presence" >&5 +-$as_echo_n "checking cpufreq.h presence... " >&6; } +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include +-_ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || +- test ! -s conftest.err +- }; then +- ac_header_preproc=yes ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: *** modemlights applet will not be built ***" >&5 ++$as_echo "$as_me: WARNING: *** modemlights applet will not be built ***" >&2;} ++ BUILD_MODEM_LIGHTS=no ++ ++ if test "x$BUILD_MODEM_LIGHTS" = "xyes"; then ++ APPLET_MODEMLIGHTS_TRUE= ++ APPLET_MODEMLIGHTS_FALSE='#' + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ APPLET_MODEMLIGHTS_TRUE='#' ++ APPLET_MODEMLIGHTS_FALSE= ++fi + +- ac_header_preproc=no ++ ++ ++# Check whether --enable-cpufreq was given. ++if test "${enable_cpufreq+set}" = set; then : ++ enableval=$enable_cpufreq; ++else ++ disable_cpufreq=no + fi + +-rm -f conftest.err conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-$as_echo "$ac_header_preproc" >&6; } + +-# So? What about this header? +-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +- yes:no: ) +- { $as_echo "$as_me:$LINENO: WARNING: cpufreq.h: accepted by the compiler, rejected by the preprocessor!" >&5 +-$as_echo "$as_me: WARNING: cpufreq.h: accepted by the compiler, rejected by the preprocessor!" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: cpufreq.h: proceeding with the compiler's result" >&5 +-$as_echo "$as_me: WARNING: cpufreq.h: proceeding with the compiler's result" >&2;} +- ac_header_preproc=yes +- ;; +- no:yes:* ) +- { $as_echo "$as_me:$LINENO: WARNING: cpufreq.h: present but cannot be compiled" >&5 +-$as_echo "$as_me: WARNING: cpufreq.h: present but cannot be compiled" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: cpufreq.h: check for missing prerequisite headers?" >&5 +-$as_echo "$as_me: WARNING: cpufreq.h: check for missing prerequisite headers?" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: cpufreq.h: see the Autoconf documentation" >&5 +-$as_echo "$as_me: WARNING: cpufreq.h: see the Autoconf documentation" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: cpufreq.h: section \"Present But Cannot Be Compiled\"" >&5 +-$as_echo "$as_me: WARNING: cpufreq.h: section \"Present But Cannot Be Compiled\"" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: cpufreq.h: proceeding with the preprocessor's result" >&5 +-$as_echo "$as_me: WARNING: cpufreq.h: proceeding with the preprocessor's result" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: cpufreq.h: in the future, the compiler will take precedence" >&5 +-$as_echo "$as_me: WARNING: cpufreq.h: in the future, the compiler will take precedence" >&2;} ++# Check whether --enable-frequency-selector was given. ++if test "${enable_frequency_selector+set}" = set; then : ++ enableval=$enable_frequency_selector; ++else ++ enable_selector=yes ++fi + +- ;; +-esac +-{ $as_echo "$as_me:$LINENO: checking for cpufreq.h" >&5 +-$as_echo_n "checking for cpufreq.h... " >&6; } +-if test "${ac_cv_header_cpufreq_h+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ ++# Check whether --enable-suid was given. ++if test "${enable_suid+set}" = set; then : ++ enableval=$enable_suid; + else +- ac_cv_header_cpufreq_h=$ac_header_preproc ++ suid=yes + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_cpufreq_h" >&5 +-$as_echo "$ac_cv_header_cpufreq_h" >&6; } + ++ ++if test "x$HAVE_POLKIT" = "xyes"; then ++ suid=no + fi +-if test "x$ac_cv_header_cpufreq_h" = x""yes; then ++ ++ac_fn_c_check_header_mongrel "$LINENO" "cpufreq.h" "ac_cv_header_cpufreq_h" "$ac_includes_default" ++if test "x$ac_cv_header_cpufreq_h" = x""yes; then : + have_libcpufreq=yes + else + have_libcpufreq=no +@@ -20273,9 +16842,7 @@ + LIBCPUFREQ_LIBS= + if test "x$have_libcpufreq" = "xyes"; then + +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_LIBCPUFREQ 1 +-_ACEOF ++$as_echo "#define HAVE_LIBCPUFREQ 1" >>confdefs.h + + LIBCPUFREQ_LIBS=-lcpufreq + fi +@@ -20297,7 +16864,7 @@ + build_cpufreq_applet=yes + ;; + *) +- { $as_echo "$as_me:$LINENO: WARNING: ${host} is not supported by cpufreq applet, not building" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: ${host} is not supported by cpufreq applet, not building" >&5 + $as_echo "$as_me: WARNING: ${host} is not supported by cpufreq applet, not building" >&2;} + build_cpufreq_applet=no + ;; +@@ -20333,9 +16900,9 @@ + if test "x$HAVE_PYGTK" = "xyes" -a "x$HAVE_PYHDRS" = "xyes"; then + + py_mod_var=`echo gnomeapplet'_' | sed 'y%./+-%__p_%'` +-{ $as_echo "$as_me:$LINENO: checking for python module gnomeapplet" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for python module gnomeapplet" >&5 + $as_echo_n "checking for python module gnomeapplet... " >&6; } +-if { as_var=py_cv_mod_$py_mod_var; eval "test \"\${$as_var+set}\" = set"; }; then ++if { as_var=py_cv_mod_$py_mod_var; eval "test \"\${$as_var+set}\" = set"; }; then : + $as_echo_n "(cached) " >&6 + else + +@@ -20359,11 +16926,11 @@ + + py_val=`eval "echo \`echo '$py_cv_mod_'$py_mod_var\`"` + if test "x$py_val" != xno; then +- { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } + BUILD_INVEST_APPLET="yes" + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + $as_echo "no" >&6; } + BUILD_INVEST_APPLET="no" + fi +@@ -20381,10 +16948,10 @@ + fi + + +-{ $as_echo "$as_me:$LINENO: checking whether to enable ipv6" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable ipv6" >&5 + $as_echo_n "checking whether to enable ipv6... " >&6; } + # Check whether --enable-ipv6 was given. +-if test "${enable_ipv6+set}" = set; then ++if test "${enable_ipv6+set}" = set; then : + enableval=$enable_ipv6; + else + enable_ipv6=yes +@@ -20392,11 +16959,7 @@ + + if test $enable_ipv6 = yes; then + +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + #include +@@ -20411,132 +16974,25 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then ++if ac_fn_c_try_compile "$LINENO"; then : + have_ipv6=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- have_ipv6=no ++ have_ipv6=no + + fi +- + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +- { $as_echo "$as_me:$LINENO: result: $have_ipv6" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_ipv6" >&5 + $as_echo "$have_ipv6" >&6; } + if test $have_ipv6 = yes; then + +-cat >>confdefs.h <<\_ACEOF +-#define ENABLE_IPV6 1 +-_ACEOF ++$as_echo "#define ENABLE_IPV6 1" >>confdefs.h + + fi + fi + + have_getaddrinfo=no +-{ $as_echo "$as_me:$LINENO: checking for getaddrinfo" >&5 +-$as_echo_n "checking for getaddrinfo... " >&6; } +-if test "${ac_cv_func_getaddrinfo+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define getaddrinfo to an innocuous variant, in case declares getaddrinfo. +- For example, HP-UX 11i declares gettimeofday. */ +-#define getaddrinfo innocuous_getaddrinfo +- +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char getaddrinfo (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ +- +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif +- +-#undef getaddrinfo +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char getaddrinfo (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_getaddrinfo || defined __stub___getaddrinfo +-choke me +-#endif +- +-int +-main () +-{ +-return getaddrinfo (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_func_getaddrinfo=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_func_getaddrinfo=no +-fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_getaddrinfo" >&5 +-$as_echo "$ac_cv_func_getaddrinfo" >&6; } +-if test "x$ac_cv_func_getaddrinfo" = x""yes; then ++ac_fn_c_check_func "$LINENO" "getaddrinfo" "ac_cv_func_getaddrinfo" ++if test "x$ac_cv_func_getaddrinfo" = x""yes; then : + have_getaddrinfo=yes + fi + +@@ -20544,18 +17000,14 @@ + # getaddrinfo is not in the default libraries. See if it's in some other. + for lib in bsd socket inet; do + as_ac_Lib=`$as_echo "ac_cv_lib_$lib''_getaddrinfo" | $as_tr_sh` +-{ $as_echo "$as_me:$LINENO: checking for getaddrinfo in -l$lib" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for getaddrinfo in -l$lib" >&5 + $as_echo_n "checking for getaddrinfo in -l$lib... " >&6; } +-if { as_var=$as_ac_Lib; eval "test \"\${$as_var+set}\" = set"; }; then ++if { as_var=$as_ac_Lib; eval "test \"\${$as_var+set}\" = set"; }; then : + $as_echo_n "(cached) " >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-l$lib $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + /* Override any GCC internal prototype to avoid an error. +@@ -20573,246 +17025,64 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + eval "$as_ac_Lib=yes" + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- eval "$as_ac_Lib=no" ++ eval "$as_ac_Lib=no" + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-ac_res=`eval 'as_val=${'$as_ac_Lib'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } +-as_val=`eval 'as_val=${'$as_ac_Lib'} +- $as_echo "$as_val"'` +- if test "x$as_val" = x""yes; then +- LIBS="$LIBS -l$lib";have_getaddrinfo=yes; break +-fi +- +- done +-fi +-if test $have_getaddrinfo = yes; then +- +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_GETADDRINFO 1 +-_ACEOF +- +-fi +- +-{ $as_echo "$as_me:$LINENO: checking for struct tm.tm_gmtoff" >&5 +-$as_echo_n "checking for struct tm.tm_gmtoff... " >&6; } +-if test "${ac_cv_member_struct_tm_tm_gmtoff+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include +- +-int +-main () +-{ +-static struct tm ac_aggr; +-if (ac_aggr.tm_gmtoff) +-return 0; +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_cv_member_struct_tm_tm_gmtoff=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include +- +-int +-main () +-{ +-static struct tm ac_aggr; +-if (sizeof ac_aggr.tm_gmtoff) +-return 0; +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_cv_member_struct_tm_tm_gmtoff=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_member_struct_tm_tm_gmtoff=no +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_member_struct_tm_tm_gmtoff" >&5 +-$as_echo "$ac_cv_member_struct_tm_tm_gmtoff" >&6; } +-if test "x$ac_cv_member_struct_tm_tm_gmtoff" = x""yes; then +- struct_tm_tm_gmtoff=true +-else +- struct_tm_tm_gmtoff=false +-fi +- +-case $struct_tm_tm_gmtoff in +- true) +- +-cat >>confdefs.h <<_ACEOF +-#define HAVE_TM_TM_GMOFF 1 +-_ACEOF +- +- ;; +- *) +- { $as_echo "$as_me:$LINENO: checking whether timezone is declared" >&5 +-$as_echo_n "checking whether timezone is declared... " >&6; } +-if test "${ac_cv_have_decl_timezone+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-#include +- +- +-int +-main () +-{ +-#ifndef timezone +- (void) timezone; +-#endif +- +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_cv_have_decl_timezone=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++eval ac_res=\$$as_ac_Lib ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 ++$as_echo "$ac_res" >&6; } ++eval as_val=\$$as_ac_Lib ++ if test "x$as_val" = x""yes; then : ++ LIBS="$LIBS -l$lib";have_getaddrinfo=yes; break ++fi + +- ac_cv_have_decl_timezone=no ++ done + fi ++if test $have_getaddrinfo = yes; then + +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++$as_echo "#define HAVE_GETADDRINFO 1" >>confdefs.h ++ ++fi ++ ++ac_fn_c_check_member "$LINENO" "struct tm" "tm_gmtoff" "ac_cv_member_struct_tm_tm_gmtoff" "#include ++" ++if test "x$ac_cv_member_struct_tm_tm_gmtoff" = x""yes; then : ++ struct_tm_tm_gmtoff=true ++else ++ struct_tm_tm_gmtoff=false + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_have_decl_timezone" >&5 +-$as_echo "$ac_cv_have_decl_timezone" >&6; } +-if test "x$ac_cv_have_decl_timezone" = x""yes; then + +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_TIMEZONE 1 ++case $struct_tm_tm_gmtoff in ++ true) ++ ++cat >>confdefs.h <<_ACEOF ++#define HAVE_TM_TM_GMOFF 1 + _ACEOF + ++ ;; ++ *) ++ ac_fn_c_check_decl "$LINENO" "timezone" "ac_cv_have_decl_timezone" " ++#include ++ ++" ++if test "x$ac_cv_have_decl_timezone" = x""yes; then : ++ ++$as_echo "#define HAVE_TIMEZONE 1" >>confdefs.h ++ + fi + + ;; + esac + +-{ $as_echo "$as_me:$LINENO: checking for _NL_MEASUREMENT_MEASUREMENT" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for _NL_MEASUREMENT_MEASUREMENT" >&5 + $as_echo_n "checking for _NL_MEASUREMENT_MEASUREMENT... " >&6; } +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + #include + int +@@ -20826,45 +17096,18 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++if ac_fn_c_try_link "$LINENO"; then : + gtk_ok=yes + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- gtk_ok=no ++ gtk_ok=no + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $gtk_ok" >&5 ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gtk_ok" >&5 + $as_echo "$gtk_ok" >&6; } + if test "$gtk_ok" = "yes"; then + +-cat >>confdefs.h <<\_ACEOF +-#define HAVE__NL_MEASUREMENT_MEASUREMENT 1 +-_ACEOF ++$as_echo "#define HAVE__NL_MEASUREMENT_MEASUREMENT 1" >>confdefs.h + + fi + +@@ -21093,13 +17336,13 @@ + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( +- *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 ++ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 + $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( +- *) $as_unset $ac_var ;; ++ *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done +@@ -21107,8 +17350,8 @@ + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) +- # `set' does not quote correctly, so add quotes (double-quote +- # substitution turns \\\\ into \\, and sed turns \\ into \). ++ # `set' does not quote correctly, so add quotes: double-quote ++ # substitution turns \\\\ into \\, and sed turns \\ into \. + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" +@@ -21131,11 +17374,11 @@ + if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + test "x$cache_file" != "x/dev/null" && +- { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 + $as_echo "$as_me: updating cache $cache_file" >&6;} + cat confcache >$cache_file + else +- { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 + $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi + fi +@@ -21155,215 +17398,143 @@ + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. +- ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" +- ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' ++ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" ++ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' + done + LIBOBJS=$ac_libobjs + + LTLIBOBJS=$ac_ltlibobjs + + ++ if test -n "$EXEEXT"; then ++ am__EXEEXT_TRUE= ++ am__EXEEXT_FALSE='#' ++else ++ am__EXEEXT_TRUE='#' ++ am__EXEEXT_FALSE= ++fi ++ + if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "conditional \"MAINTAINER_MODE\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi + if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"AMDEP\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "conditional \"AMDEP\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi + if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "conditional \"am__fastdepCC\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi + + ac_config_commands="$ac_config_commands po/stamp-it" + + + if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "conditional \"am__fastdepCC\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi + if test -z "${BUILD_GTOP_APPLETS_TRUE}" && test -z "${BUILD_GTOP_APPLETS_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"BUILD_GTOP_APPLETS\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"BUILD_GTOP_APPLETS\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "conditional \"BUILD_GTOP_APPLETS\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi + if test -z "${BUILD_KEYBOARD_APPLET_TRUE}" && test -z "${BUILD_KEYBOARD_APPLET_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"BUILD_KEYBOARD_APPLET\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"BUILD_KEYBOARD_APPLET\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "conditional \"BUILD_KEYBOARD_APPLET\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi + if test -z "${HAVE_POLKIT_TRUE}" && test -z "${HAVE_POLKIT_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"HAVE_POLKIT\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"HAVE_POLKIT\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "conditional \"HAVE_POLKIT\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi + if test -z "${BUILD_LIBGWEATHER_APPLETS_TRUE}" && test -z "${BUILD_LIBGWEATHER_APPLETS_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"BUILD_LIBGWEATHER_APPLETS\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"BUILD_LIBGWEATHER_APPLETS\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "conditional \"BUILD_LIBGWEATHER_APPLETS\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi + if test -z "${BUILD_MIXER_APPLET_TRUE}" && test -z "${BUILD_MIXER_APPLET_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"BUILD_MIXER_APPLET\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"BUILD_MIXER_APPLET\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "conditional \"BUILD_MIXER_APPLET\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi + if test -z "${HAVE_JW_TRUE}" && test -z "${HAVE_JW_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"HAVE_JW\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"HAVE_JW\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "conditional \"HAVE_JW\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi + if test -z "${GCONF_SCHEMAS_INSTALL_TRUE}" && test -z "${GCONF_SCHEMAS_INSTALL_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"GCONF_SCHEMAS_INSTALL\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"GCONF_SCHEMAS_INSTALL\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "conditional \"GCONF_SCHEMAS_INSTALL\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi + if test -z "${ENABLE_SK_TRUE}" && test -z "${ENABLE_SK_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"ENABLE_SK\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"ENABLE_SK\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "conditional \"ENABLE_SK\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi + if test -z "${HAVE_GNOME_DOC_UTILS_TRUE}" && test -z "${HAVE_GNOME_DOC_UTILS_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"HAVE_GNOME_DOC_UTILS\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"HAVE_GNOME_DOC_UTILS\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "conditional \"HAVE_GNOME_DOC_UTILS\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi + if test -z "${ENABLE_FLAGS_TRUE}" && test -z "${ENABLE_FLAGS_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"ENABLE_FLAGS\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"ENABLE_FLAGS\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "conditional \"ENABLE_FLAGS\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi + if test -z "${GKB_SUN_TRUE}" && test -z "${GKB_SUN_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"GKB_SUN\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"GKB_SUN\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "conditional \"GKB_SUN\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi + if test -z "${HAVE_LIBAPM_TRUE}" && test -z "${HAVE_LIBAPM_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"HAVE_LIBAPM\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"HAVE_LIBAPM\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "conditional \"HAVE_LIBAPM\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi + if test -z "${NEED_LIBAPM_TRUE}" && test -z "${NEED_LIBAPM_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"NEED_LIBAPM\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"NEED_LIBAPM\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "conditional \"NEED_LIBAPM\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi + if test -z "${BUILD_BATTSTAT_APPLET_TRUE}" && test -z "${BUILD_BATTSTAT_APPLET_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"BUILD_BATTSTAT_APPLET\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"BUILD_BATTSTAT_APPLET\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "conditional \"BUILD_BATTSTAT_APPLET\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi + if test -z "${BUILD_MINICOMMANDER_APPLET_TRUE}" && test -z "${BUILD_MINICOMMANDER_APPLET_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"BUILD_MINICOMMANDER_APPLET\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"BUILD_MINICOMMANDER_APPLET\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "conditional \"BUILD_MINICOMMANDER_APPLET\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi + if test -z "${BUILD_STICKYNOTES_APPLET_TRUE}" && test -z "${BUILD_STICKYNOTES_APPLET_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"BUILD_STICKYNOTES_APPLET\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"BUILD_STICKYNOTES_APPLET\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "conditional \"BUILD_STICKYNOTES_APPLET\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi + if test -z "${APPLET_ACCESSX_TRUE}" && test -z "${APPLET_ACCESSX_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"APPLET_ACCESSX\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"APPLET_ACCESSX\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "conditional \"APPLET_ACCESSX\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi + if test -z "${APPLET_MODEMLIGHTS_TRUE}" && test -z "${APPLET_MODEMLIGHTS_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"APPLET_MODEMLIGHTS\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"APPLET_MODEMLIGHTS\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "conditional \"APPLET_MODEMLIGHTS\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi + if test -z "${HAVE_LIBCPUFREQ_TRUE}" && test -z "${HAVE_LIBCPUFREQ_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"HAVE_LIBCPUFREQ\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"HAVE_LIBCPUFREQ\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "conditional \"HAVE_LIBCPUFREQ\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi + if test -z "${BUILD_CPUFREQ_APPLET_TRUE}" && test -z "${BUILD_CPUFREQ_APPLET_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"BUILD_CPUFREQ_APPLET\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"BUILD_CPUFREQ_APPLET\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "conditional \"BUILD_CPUFREQ_APPLET\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi + if test -z "${BUILD_CPUFREQ_SELECTOR_TRUE}" && test -z "${BUILD_CPUFREQ_SELECTOR_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"BUILD_CPUFREQ_SELECTOR\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"BUILD_CPUFREQ_SELECTOR\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "conditional \"BUILD_CPUFREQ_SELECTOR\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi + if test -z "${CPUFREQ_SELECTOR_SUID_TRUE}" && test -z "${CPUFREQ_SELECTOR_SUID_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"CPUFREQ_SELECTOR_SUID\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"CPUFREQ_SELECTOR_SUID\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "conditional \"CPUFREQ_SELECTOR_SUID\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi + if test -z "${BUILD_INVEST_APPLET_TRUE}" && test -z "${BUILD_INVEST_APPLET_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"BUILD_INVEST_APPLET\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"BUILD_INVEST_APPLET\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "conditional \"BUILD_INVEST_APPLET\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi + + : ${CONFIG_STATUS=./config.status} + ac_write_fail=0 + ac_clean_files_save=$ac_clean_files + ac_clean_files="$ac_clean_files $CONFIG_STATUS" +-{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 + $as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +-cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++as_write_fail=0 ++cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 + #! $SHELL + # Generated by $as_me. + # Run this file to recreate the current configuration. +@@ -21373,17 +17544,18 @@ + debug=false + ac_cs_recheck=false + ac_cs_silent=false +-SHELL=\${CONFIG_SHELL-$SHELL} +-_ACEOF + +-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +-## --------------------- ## +-## M4sh Initialization. ## +-## --------------------- ## ++SHELL=\${CONFIG_SHELL-$SHELL} ++export SHELL ++_ASEOF ++cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 ++## -------------------- ## ++## M4sh Initialization. ## ++## -------------------- ## + + # Be more Bourne compatible + DUALCASE=1; export DUALCASE # for MKS sh +-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which +@@ -21391,23 +17563,15 @@ + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST + else +- case `(set -o) 2>/dev/null` in +- *posix*) set -o posix ;; ++ case `(set -o) 2>/dev/null` in #( ++ *posix*) : ++ set -o posix ;; #( ++ *) : ++ ;; + esac +- + fi + + +- +- +-# PATH needs CR +-# Avoid depending upon Character Ranges. +-as_cr_letters='abcdefghijklmnopqrstuvwxyz' +-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +-as_cr_Letters=$as_cr_letters$as_cr_LETTERS +-as_cr_digits='0123456789' +-as_cr_alnum=$as_cr_Letters$as_cr_digits +- + as_nl=' + ' + export as_nl +@@ -21415,7 +17579,13 @@ + as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo + as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +-if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then ++# Prefer a ksh shell builtin over an external printf program on Solaris, ++# but without wasting forks for bash or zsh. ++if test -z "$BASH_VERSION$ZSH_VERSION" \ ++ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then ++ as_echo='print -r --' ++ as_echo_n='print -rn --' ++elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' + else +@@ -21426,7 +17596,7 @@ + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; +- case $arg in ++ case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; +@@ -21449,13 +17619,6 @@ + } + fi + +-# Support unset when possible. +-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then +- as_unset=unset +-else +- as_unset=false +-fi +- + + # IFS + # We need space, tab and new line, in precisely that order. Quoting is +@@ -21465,15 +17628,15 @@ + IFS=" "" $as_nl" + + # Find who we are. Look in the path if we contain no directory separator. +-case $0 in ++case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +-done ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++ done + IFS=$as_save_IFS + + ;; +@@ -21485,12 +17648,16 @@ + fi + if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 +- { (exit 1); exit 1; } ++ exit 1 + fi + +-# Work around bugs in pre-3.0 UWIN ksh. +-for as_var in ENV MAIL MAILPATH +-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++# Unset variables that we do not need and which cause bugs (e.g. in ++# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" ++# suppresses any "Segmentation fault" message there. '((' could ++# trigger a bug in pdksh 5.2.14. ++for as_var in BASH_ENV ENV MAIL MAILPATH ++do eval test x\${$as_var+set} = xset \ ++ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : + done + PS1='$ ' + PS2='> ' +@@ -21502,7 +17669,89 @@ + LANGUAGE=C + export LANGUAGE + +-# Required to use basename. ++# CDPATH. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++ ++ ++# as_fn_error ERROR [LINENO LOG_FD] ++# --------------------------------- ++# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are ++# provided, also output the error to LOG_FD, referencing LINENO. Then exit the ++# script with status $?, using 1 if that was 0. ++as_fn_error () ++{ ++ as_status=$?; test $as_status -eq 0 && as_status=1 ++ if test "$3"; then ++ as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3 ++ fi ++ $as_echo "$as_me: error: $1" >&2 ++ as_fn_exit $as_status ++} # as_fn_error ++ ++ ++# as_fn_set_status STATUS ++# ----------------------- ++# Set $? to STATUS, without forking. ++as_fn_set_status () ++{ ++ return $1 ++} # as_fn_set_status ++ ++# as_fn_exit STATUS ++# ----------------- ++# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. ++as_fn_exit () ++{ ++ set +e ++ as_fn_set_status $1 ++ exit $1 ++} # as_fn_exit ++ ++# as_fn_unset VAR ++# --------------- ++# Portably unset VAR. ++as_fn_unset () ++{ ++ { eval $1=; unset $1;} ++} ++as_unset=as_fn_unset ++# as_fn_append VAR VALUE ++# ---------------------- ++# Append the text in VALUE to the end of the definition contained in VAR. Take ++# advantage of any shell optimizations that allow amortized linear growth over ++# repeated appends, instead of the typical quadratic growth present in naive ++# implementations. ++if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : ++ eval 'as_fn_append () ++ { ++ eval $1+=\$2 ++ }' ++else ++ as_fn_append () ++ { ++ eval $1=\$$1\$2 ++ } ++fi # as_fn_append ++ ++# as_fn_arith ARG... ++# ------------------ ++# Perform arithmetic evaluation on the ARGs, and store the result in the ++# global $as_val. Take advantage of shells that can avoid forks. The arguments ++# must be portable across $(()) and expr. ++if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : ++ eval 'as_fn_arith () ++ { ++ as_val=$(( $* )) ++ }' ++else ++ as_fn_arith () ++ { ++ as_val=`expr "$@" || test $? -eq 1` ++ } ++fi # as_fn_arith ++ ++ + if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +@@ -21516,8 +17765,12 @@ + as_basename=false + fi + ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false ++fi + +-# Name of the executable. + as_me=`$as_basename -- "$0" || + $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ +@@ -21537,76 +17790,25 @@ + } + s/.*/./; q'` + +-# CDPATH. +-$as_unset CDPATH +- +- +- +- as_lineno_1=$LINENO +- as_lineno_2=$LINENO +- test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { +- +- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO +- # uniformly replaced by the line number. The first 'sed' inserts a +- # line-number line after each line using $LINENO; the second 'sed' +- # does the real work. The second script uses 'N' to pair each +- # line-number line with the line containing $LINENO, and appends +- # trailing '-' during substitution so that $LINENO is not a special +- # case at line end. +- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the +- # scripts with optimization help from Paolo Bonzini. Blame Lee +- # E. McMahon (1931-1989) for sed's syntax. :-) +- sed -n ' +- p +- /[$]LINENO/= +- ' <$as_myself | +- sed ' +- s/[$]LINENO.*/&-/ +- t lineno +- b +- :lineno +- N +- :loop +- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ +- t loop +- s/-\n.*// +- ' >$as_me.lineno && +- chmod +x "$as_me.lineno" || +- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 +- { (exit 1); exit 1; }; } +- +- # Don't try to exec as it changes $[0], causing all sort of problems +- # (the dirname of $[0] is not the place where we might find the +- # original and so on. Autoconf is especially sensitive to this). +- . "./$as_me.lineno" +- # Exit status is that of the last command. +- exit +-} +- +- +-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then +- as_dirname=dirname +-else +- as_dirname=false +-fi ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits + + ECHO_C= ECHO_N= ECHO_T= +-case `echo -n x` in ++case `echo -n x` in #((((( + -n*) +- case `echo 'x\c'` in ++ case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. +- *) ECHO_C='\c';; ++ xy) ECHO_C='\c';; ++ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ++ ECHO_T=' ';; + esac;; + *) + ECHO_N='-n';; + esac +-if expr a : '\(a\)' >/dev/null 2>&1 && +- test "X`expr 00001 : '.*\(...\)'`" = X001; then +- as_expr=expr +-else +- as_expr=false +-fi + + rm -f conf$$ conf$$.exe conf$$.file + if test -d conf$$.dir; then +@@ -21635,8 +17837,56 @@ + rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file + rmdir conf$$.dir 2>/dev/null + ++ ++# as_fn_mkdir_p ++# ------------- ++# Create "$as_dir" as a directory, including parents if necessary. ++as_fn_mkdir_p () ++{ ++ ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || eval $as_mkdir_p || { ++ as_dirs= ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || ++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$as_dir" : 'X\(//\)[^/]' \| \ ++ X"$as_dir" : 'X\(//\)$' \| \ ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$as_dir" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break ++ done ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir" ++ ++ ++} # as_fn_mkdir_p + if mkdir -p . 2>/dev/null; then +- as_mkdir_p=: ++ as_mkdir_p='mkdir -p "$as_dir"' + else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +@@ -21655,10 +17905,10 @@ + if test -d "$1"; then + test -d "$1/."; + else +- case $1 in ++ case $1 in #( + -*)set "./$1";; + esac; +- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +@@ -21673,13 +17923,19 @@ + + + exec 6>&1 ++## ----------------------------------- ## ++## Main body of $CONFIG_STATUS script. ## ++## ----------------------------------- ## ++_ASEOF ++test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 + +-# Save the log message, to keep $[0] and so on meaningful, and to ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++# Save the log message, to keep $0 and so on meaningful, and to + # report actual input values of CONFIG_FILES etc. instead of their + # values after options handling. + ac_log=" + This file was extended by gnome-applets $as_me 2.28.0, which was +-generated by GNU Autoconf 2.63. Invocation command line was ++generated by GNU Autoconf 2.64. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS +@@ -21711,10 +17967,11 @@ + + cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + ac_cs_usage="\ +-\`$as_me' instantiates files from templates according to the +-current configuration. ++\`$as_me' instantiates files and other configuration actions ++from templates according to the current configuration. Unless the files ++and actions are specified as TAGs, all are instantiated by default. + +-Usage: $0 [OPTION]... [FILE]... ++Usage: $0 [OPTION]... [TAG]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit +@@ -21736,16 +17993,16 @@ + Configuration commands: + $config_commands + +-Report bugs to ." ++Report bugs to the package provider." + + _ACEOF + cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_cs_version="\\ + gnome-applets config.status 2.28.0 +-configured by $0, generated by GNU Autoconf 2.63, ++configured by $0, generated by GNU Autoconf 2.64, + with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" + +-Copyright (C) 2008 Free Software Foundation, Inc. ++Copyright (C) 2009 Free Software Foundation, Inc. + This config.status script is free software; the Free Software Foundation + gives unlimited permission to copy, distribute and modify it." + +@@ -21788,20 +18045,19 @@ + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac +- CONFIG_FILES="$CONFIG_FILES '$ac_optarg'" ++ as_fn_append CONFIG_FILES " '$ac_optarg'" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac +- CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'" ++ as_fn_append CONFIG_HEADERS " '$ac_optarg'" + ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header +- { $as_echo "$as_me: error: ambiguous option: $1 +-Try \`$0 --help' for more information." >&2 +- { (exit 1); exit 1; }; };; ++ as_fn_error "ambiguous option: \`$1' ++Try \`$0 --help' for more information.";; + --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ +@@ -21809,11 +18065,10 @@ + ac_cs_silent=: ;; + + # This is an error. +- -*) { $as_echo "$as_me: error: unrecognized option: $1 +-Try \`$0 --help' for more information." >&2 +- { (exit 1); exit 1; }; } ;; ++ -*) as_fn_error "unrecognized option: \`$1' ++Try \`$0 --help' for more information." ;; + +- *) ac_config_targets="$ac_config_targets $1" ++ *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; + + esac +@@ -22178,9 +18433,7 @@ + "null_applet/Makefile") CONFIG_FILES="$CONFIG_FILES null_applet/Makefile" ;; + "po/stamp-it") CONFIG_COMMANDS="$CONFIG_COMMANDS po/stamp-it" ;; + +- *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +-$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;} +- { (exit 1); exit 1; }; };; ++ *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + esac + done + +@@ -22207,7 +18460,7 @@ + trap 'exit_status=$? + { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status + ' 0 +- trap '{ (exit 1); exit 1; }' 1 2 13 15 ++ trap 'as_fn_exit 1' 1 2 13 15 + } + # Create a (secure) tmp directory for tmp files. + +@@ -22218,11 +18471,7 @@ + { + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +-} || +-{ +- $as_echo "$as_me: cannot create a temporary directory in ." >&2 +- { (exit 1); exit 1; } +-} ++} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5 + + # Set up the scripts for CONFIG_FILES section. + # No need to generate them if there are no CONFIG_FILES. +@@ -22230,10 +18479,16 @@ + if test -n "$CONFIG_FILES"; then + + +-ac_cr=' ' ++ac_cr=`echo X | tr X '\015'` ++# On cygwin, bash can eat \r inside `` if the user requested igncr. ++# But we know of no other shell where ac_cr would be empty at this ++# point, so we can use a bashism as a fallback. ++if test "x$ac_cr" = x; then ++ eval ac_cr=\$\'\\r\' ++fi + ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` + if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then +- ac_cs_awk_cr='\\r' ++ ac_cs_awk_cr='\r' + else + ac_cs_awk_cr=$ac_cr + fi +@@ -22247,24 +18502,18 @@ + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" + } >conf$$subs.sh || +- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 + ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` + ac_delim='%!_!# ' + for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || +- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then +- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +@@ -22353,9 +18602,7 @@ + else + cat + fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ +- || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5 +-$as_echo "$as_me: error: could not setup config files machinery" >&2;} +- { (exit 1); exit 1; }; } ++ || as_fn_error "could not setup config files machinery" "$LINENO" 5 + _ACEOF + + # VPATH may cause trouble with some makes, so we remove $(srcdir), +@@ -22396,9 +18643,7 @@ + if test -z "$ac_t"; then + break + elif $ac_last_try; then +- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5 +-$as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +@@ -22483,9 +18728,7 @@ + _ACAWK + _ACEOF + cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +- { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5 +-$as_echo "$as_me: error: could not setup config headers machinery" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "could not setup config headers machinery" "$LINENO" 5 + fi # test -n "$CONFIG_HEADERS" + + +@@ -22498,9 +18741,7 @@ + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; +- :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5 +-$as_echo "$as_me: error: invalid tag $ac_tag" >&2;} +- { (exit 1); exit 1; }; };; ++ :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac +@@ -22528,12 +18769,10 @@ + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || +- { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 +-$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;} +- { (exit 1); exit 1; }; };; ++ as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac +- ac_file_inputs="$ac_file_inputs '$ac_f'" ++ as_fn_append ac_file_inputs " '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't +@@ -22544,7 +18783,7 @@ + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" +- { $as_echo "$as_me:$LINENO: creating $ac_file" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 + $as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. +@@ -22557,9 +18796,7 @@ + + case $ac_tag in + *:-:* | *:-) cat >"$tmp/stdin" \ +- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +-$as_echo "$as_me: error: could not create $ac_file" >&2;} +- { (exit 1); exit 1; }; } ;; ++ || as_fn_error "could not create $ac_file" "$LINENO" 5 ;; + esac + ;; + esac +@@ -22587,47 +18824,7 @@ + q + } + s/.*/./; q'` +- { as_dir="$ac_dir" +- case $as_dir in #( +- -*) as_dir=./$as_dir;; +- esac +- test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { +- as_dirs= +- while :; do +- case $as_dir in #( +- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( +- *) as_qdir=$as_dir;; +- esac +- as_dirs="'$as_qdir' $as_dirs" +- as_dir=`$as_dirname -- "$as_dir" || +-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$as_dir" : 'X\(//\)[^/]' \| \ +- X"$as_dir" : 'X\(//\)$' \| \ +- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +-$as_echo X"$as_dir" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)[^/].*/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)$/{ +- s//\1/ +- q +- } +- /^X\(\/\).*/{ +- s//\1/ +- q +- } +- s/.*/./; q'` +- test -d "$as_dir" && break +- done +- test -z "$as_dirs" || eval "mkdir $as_dirs" +- } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +-$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} +- { (exit 1); exit 1; }; }; } ++ as_dir="$ac_dir"; as_fn_mkdir_p + ac_builddir=. + + case "$ac_dir" in +@@ -22684,7 +18881,6 @@ + # If the template does not know about datarootdir, expand it. + # FIXME: This hack should be removed a few years after 2.60. + ac_datarootdir_hack=; ac_datarootdir_seen= +- + ac_sed_dataroot=' + /datarootdir/ { + p +@@ -22694,12 +18890,11 @@ + /@docdir@/p + /@infodir@/p + /@localedir@/p +-/@mandir@/p +-' ++/@mandir@/p' + case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in + *datarootdir*) ac_datarootdir_seen=yes;; + *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) +- { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 + $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} + _ACEOF + cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +@@ -22709,7 +18904,7 @@ + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g +- s&\\\${datarootdir}&$datarootdir&g' ;; ++ s&\\\${datarootdir}&$datarootdir&g' ;; + esac + _ACEOF + +@@ -22738,14 +18933,12 @@ + $ac_datarootdir_hack + " + eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ +- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +-$as_echo "$as_me: error: could not create $ac_file" >&2;} +- { (exit 1); exit 1; }; } ++ || as_fn_error "could not create $ac_file" "$LINENO" 5 + + test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && +- { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' + which seems to be undefined. Please make sure it is defined." >&5 + $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' + which seems to be undefined. Please make sure it is defined." >&2;} +@@ -22755,9 +18948,7 @@ + -) cat "$tmp/out" && rm -f "$tmp/out";; + *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; + esac \ +- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +-$as_echo "$as_me: error: could not create $ac_file" >&2;} +- { (exit 1); exit 1; }; } ++ || as_fn_error "could not create $ac_file" "$LINENO" 5 + ;; + :H) + # +@@ -22768,25 +18959,19 @@ + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" + } >"$tmp/config.h" \ +- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +-$as_echo "$as_me: error: could not create $ac_file" >&2;} +- { (exit 1); exit 1; }; } ++ || as_fn_error "could not create $ac_file" "$LINENO" 5 + if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then +- { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 + $as_echo "$as_me: $ac_file is unchanged" >&6;} + else + rm -f "$ac_file" + mv "$tmp/config.h" "$ac_file" \ +- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +-$as_echo "$as_me: error: could not create $ac_file" >&2;} +- { (exit 1); exit 1; }; } ++ || as_fn_error "could not create $ac_file" "$LINENO" 5 + fi + else + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ +- || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5 +-$as_echo "$as_me: error: could not create -" >&2;} +- { (exit 1); exit 1; }; } ++ || as_fn_error "could not create -" "$LINENO" 5 + fi + # Compute "$ac_file"'s index in $config_headers. + _am_arg="$ac_file" +@@ -22824,7 +19009,7 @@ + s/.*/./; q'`/stamp-h$_am_stamp_count + ;; + +- :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5 ++ :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 + $as_echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac +@@ -22919,47 +19104,7 @@ + q + } + s/.*/./; q'` +- { as_dir=$dirpart/$fdir +- case $as_dir in #( +- -*) as_dir=./$as_dir;; +- esac +- test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { +- as_dirs= +- while :; do +- case $as_dir in #( +- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( +- *) as_qdir=$as_dir;; +- esac +- as_dirs="'$as_qdir' $as_dirs" +- as_dir=`$as_dirname -- "$as_dir" || +-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$as_dir" : 'X\(//\)[^/]' \| \ +- X"$as_dir" : 'X\(//\)$' \| \ +- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +-$as_echo X"$as_dir" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)[^/].*/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)$/{ +- s//\1/ +- q +- } +- /^X\(\/\).*/{ +- s//\1/ +- q +- } +- s/.*/./; q'` +- test -d "$as_dir" && break +- done +- test -z "$as_dirs" || eval "mkdir $as_dirs" +- } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +-$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} +- { (exit 1); exit 1; }; }; } ++ as_dir=$dirpart/$fdir; as_fn_mkdir_p + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done +@@ -23606,9 +19751,7 @@ + esac ;; + "po/stamp-it":C) + if ! grep "^# INTLTOOL_MAKEFILE$" "po/Makefile.in" > /dev/null ; then +- { { $as_echo "$as_me:$LINENO: error: po/Makefile.in.in was not created by intltoolize." >&5 +-$as_echo "$as_me: error: po/Makefile.in.in was not created by intltoolize." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "po/Makefile.in.in was not created by intltoolize." "$LINENO" 5 + fi + rm -f "po/stamp-it" "po/stamp-it.tmp" "po/POTFILES" "po/Makefile.tmp" + >"po/stamp-it.tmp" +@@ -23631,15 +19774,12 @@ + done # for ac_tag + + +-{ (exit 0); exit 0; } ++as_fn_exit 0 + _ACEOF +-chmod +x $CONFIG_STATUS + ac_clean_files=$ac_clean_files_save + + test $ac_write_fail = 0 || +- { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5 +-$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5 + + + # configure is writing to config.log, and then calls config.status. +@@ -23660,10 +19800,10 @@ + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. +- $ac_cs_success || { (exit 1); exit 1; } ++ $ac_cs_success || as_fn_exit $? + fi + if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then +- { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 + $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} + fi + +diff -Nur gnome-applets-2.28.0/cpufreq/help/Makefile.in gnome-applets-2.28.0.ubuntu/cpufreq/help/Makefile.in +--- gnome-applets-2.28.0/cpufreq/help/Makefile.in 2009-09-21 08:19:32.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/cpufreq/help/Makefile.in 2009-09-21 12:06:42.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -38,8 +39,9 @@ + + ################################################################################ + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -70,6 +72,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +@@ -201,6 +204,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -427,9 +431,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu cpufreq/help/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu cpufreq/help/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu cpufreq/help/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu cpufreq/help/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -447,6 +451,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + mostlyclean-libtool: + -rm -f *.lo +@@ -476,13 +481,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -513,6 +522,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -531,6 +541,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -539,18 +551,28 @@ + + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -961,6 +983,7 @@ + dist-hook: doc-dist-hook + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/cpufreq/Makefile.in gnome-applets-2.28.0.ubuntu/cpufreq/Makefile.in +--- gnome-applets-2.28.0/cpufreq/Makefile.in 2009-09-21 08:19:32.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/cpufreq/Makefile.in 2009-09-21 12:06:42.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -15,8 +16,9 @@ + @SET_MAKE@ + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -47,6 +49,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ +@@ -61,20 +64,59 @@ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' + am__installdirs = "$(DESTDIR)$(builderdir)" "$(DESTDIR)$(schemasdir)" \ + "$(DESTDIR)$(serverdir)" "$(DESTDIR)$(uidir)" +-builderDATA_INSTALL = $(INSTALL_DATA) +-schemasDATA_INSTALL = $(INSTALL_DATA) +-serverDATA_INSTALL = $(INSTALL_DATA) +-uiDATA_INSTALL = $(INSTALL_DATA) + DATA = $(builder_DATA) $(schemas_DATA) $(server_DATA) $(ui_DATA) + RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive ++AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ ++ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ ++ distdir + ETAGS = etags + CTAGS = ctags + DIST_SUBDIRS = $(SUBDIRS) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++am__relativize = \ ++ dir0=`pwd`; \ ++ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ ++ sed_rest='s,^[^/]*/*,,'; \ ++ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ ++ sed_butlast='s,/*[^/]*$$,,'; \ ++ while test -n "$$dir1"; do \ ++ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ ++ if test "$$first" != "."; then \ ++ if test "$$first" = ".."; then \ ++ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ ++ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ ++ else \ ++ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ ++ if test "$$first2" = "$$first"; then \ ++ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ ++ else \ ++ dir2="../$$dir2"; \ ++ fi; \ ++ dir0="$$dir0"/"$$first"; \ ++ fi; \ ++ fi; \ ++ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ ++ done; \ ++ reldir="$$dir2" + pkgdatadir = @pkgdatadir@ + ACLOCAL = @ACLOCAL@ + ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@ +@@ -203,6 +245,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -339,9 +382,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu cpufreq/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu cpufreq/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu cpufreq/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu cpufreq/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -359,6 +402,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + mostlyclean-libtool: + -rm -f *.lo +@@ -368,71 +412,83 @@ + install-builderDATA: $(builder_DATA) + @$(NORMAL_INSTALL) + test -z "$(builderdir)" || $(MKDIR_P) "$(DESTDIR)$(builderdir)" +- @list='$(builder_DATA)'; for p in $$list; do \ ++ @list='$(builder_DATA)'; test -n "$(builderdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(builderDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(builderdir)/$$f'"; \ +- $(builderDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(builderdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(builderdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(builderdir)" || exit $$?; \ + done + + uninstall-builderDATA: + @$(NORMAL_UNINSTALL) +- @list='$(builder_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(builderdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(builderdir)/$$f"; \ +- done ++ @list='$(builder_DATA)'; test -n "$(builderdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(builderdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(builderdir)" && rm -f $$files + install-schemasDATA: $(schemas_DATA) + @$(NORMAL_INSTALL) + test -z "$(schemasdir)" || $(MKDIR_P) "$(DESTDIR)$(schemasdir)" +- @list='$(schemas_DATA)'; for p in $$list; do \ ++ @list='$(schemas_DATA)'; test -n "$(schemasdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(schemasDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(schemasdir)/$$f'"; \ +- $(schemasDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(schemasdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(schemasdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(schemasdir)" || exit $$?; \ + done + + uninstall-schemasDATA: + @$(NORMAL_UNINSTALL) +- @list='$(schemas_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(schemasdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(schemasdir)/$$f"; \ +- done ++ @list='$(schemas_DATA)'; test -n "$(schemasdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(schemasdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(schemasdir)" && rm -f $$files + install-serverDATA: $(server_DATA) + @$(NORMAL_INSTALL) + test -z "$(serverdir)" || $(MKDIR_P) "$(DESTDIR)$(serverdir)" +- @list='$(server_DATA)'; for p in $$list; do \ ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(serverDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(serverdir)/$$f'"; \ +- $(serverDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(serverdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(serverdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(serverdir)" || exit $$?; \ + done + + uninstall-serverDATA: + @$(NORMAL_UNINSTALL) +- @list='$(server_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(serverdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(serverdir)/$$f"; \ +- done ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(serverdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(serverdir)" && rm -f $$files + install-uiDATA: $(ui_DATA) + @$(NORMAL_INSTALL) + test -z "$(uidir)" || $(MKDIR_P) "$(DESTDIR)$(uidir)" +- @list='$(ui_DATA)'; for p in $$list; do \ ++ @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(uiDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(uidir)/$$f'"; \ +- $(uiDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(uidir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(uidir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(uidir)" || exit $$?; \ + done + + uninstall-uiDATA: + @$(NORMAL_UNINSTALL) +- @list='$(ui_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(uidir)/$$f'"; \ +- rm -f "$(DESTDIR)$(uidir)/$$f"; \ +- done ++ @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(uidir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(uidir)" && rm -f $$files + + # This directory's subdirectories are mostly independent; you can cd + # into them and run `make' without going through this Makefile. +@@ -458,7 +514,7 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ +@@ -492,16 +548,16 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" + tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) +@@ -516,7 +572,7 @@ + + TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ ++ set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ +@@ -528,7 +584,7 @@ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ +- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ ++ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ +@@ -537,29 +593,34 @@ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ shift; \ ++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique; \ ++ if test $$# -gt 0; then \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ "$$@" $$unique; \ ++ else \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$unique; \ ++ fi; \ + fi + ctags: CTAGS + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$tags $$unique ++ $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && cd $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) $$here ++ && $(am__cd) $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) "$$here" + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +@@ -580,29 +641,44 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ +- distdir=`$(am__cd) $(distdir) && pwd`; \ +- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ +- (cd $$subdir && \ ++ fi; \ ++ done ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ if test "$$subdir" = .; then :; else \ ++ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ ++ $(am__relativize); \ ++ new_distdir=$$reldir; \ ++ dir1=$$subdir; dir2="$(top_distdir)"; \ ++ $(am__relativize); \ ++ new_top_distdir=$$reldir; \ ++ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ ++ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ++ ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ +- top_distdir="$$top_distdir" \ +- distdir="$$distdir/$$subdir" \ ++ top_distdir="$$new_top_distdir" \ ++ distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ ++ am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ +@@ -636,6 +712,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -655,6 +732,8 @@ + + html: html-recursive + ++html-am: ++ + info: info-recursive + + info-am: +@@ -664,18 +743,28 @@ + + install-dvi: install-dvi-recursive + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-recursive + ++install-html-am: ++ + install-info: install-info-recursive + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-recursive + ++install-pdf-am: ++ + install-ps: install-ps-recursive + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -697,8 +786,8 @@ + uninstall-am: uninstall-builderDATA uninstall-schemasDATA \ + uninstall-serverDATA uninstall-uiDATA + +-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ +- install-strip ++.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ ++ install-am install-strip tags-recursive + + .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic clean-libtool \ +@@ -729,6 +818,7 @@ + @GCONF_SCHEMAS_INSTALL_TRUE@ -GCONF_CONFIG_SOURCE=$(GCONF_SCHEMA_CONFIG_SOURCE) $(GCONFTOOL) --makefile-install-rule $(top_builddir)/cpufreq/$(schemas_DATA) ; + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/cpufreq/pixmaps/Makefile.in gnome-applets-2.28.0.ubuntu/cpufreq/pixmaps/Makefile.in +--- gnome-applets-2.28.0/cpufreq/pixmaps/Makefile.in 2009-09-21 08:19:32.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/cpufreq/pixmaps/Makefile.in 2009-09-21 12:06:42.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -15,8 +16,9 @@ + @SET_MAKE@ + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -46,6 +48,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +@@ -53,9 +56,23 @@ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' + am__installdirs = "$(DESTDIR)$(cpufreq_pixmapdir)" +-cpufreq_pixmapDATA_INSTALL = $(INSTALL_DATA) + DATA = $(cpufreq_pixmap_DATA) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + pkgdatadir = @pkgdatadir@ +@@ -186,6 +203,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -318,9 +336,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu cpufreq/pixmaps/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu cpufreq/pixmaps/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu cpufreq/pixmaps/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu cpufreq/pixmaps/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -338,6 +356,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + mostlyclean-libtool: + -rm -f *.lo +@@ -347,20 +366,23 @@ + install-cpufreq_pixmapDATA: $(cpufreq_pixmap_DATA) + @$(NORMAL_INSTALL) + test -z "$(cpufreq_pixmapdir)" || $(MKDIR_P) "$(DESTDIR)$(cpufreq_pixmapdir)" +- @list='$(cpufreq_pixmap_DATA)'; for p in $$list; do \ ++ @list='$(cpufreq_pixmap_DATA)'; test -n "$(cpufreq_pixmapdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(cpufreq_pixmapDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(cpufreq_pixmapdir)/$$f'"; \ +- $(cpufreq_pixmapDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(cpufreq_pixmapdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(cpufreq_pixmapdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(cpufreq_pixmapdir)" || exit $$?; \ + done + + uninstall-cpufreq_pixmapDATA: + @$(NORMAL_UNINSTALL) +- @list='$(cpufreq_pixmap_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(cpufreq_pixmapdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(cpufreq_pixmapdir)/$$f"; \ +- done ++ @list='$(cpufreq_pixmap_DATA)'; test -n "$(cpufreq_pixmapdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(cpufreq_pixmapdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(cpufreq_pixmapdir)" && rm -f $$files + tags: TAGS + TAGS: + +@@ -384,13 +406,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -421,6 +447,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -439,6 +466,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -447,18 +476,28 @@ + + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -537,6 +576,7 @@ + fi + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/cpufreq/src/cpufreq-selector/Makefile.in gnome-applets-2.28.0.ubuntu/cpufreq/src/cpufreq-selector/Makefile.in +--- gnome-applets-2.28.0/cpufreq/src/cpufreq-selector/Makefile.in 2009-09-21 08:19:32.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/cpufreq/src/cpufreq-selector/Makefile.in 2009-09-21 12:06:43.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -16,8 +17,9 @@ + + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -56,9 +58,9 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(dbus_confdir)" \ + "$(DESTDIR)$(dbus_servicesdir)" "$(DESTDIR)$(polkitdir)" +-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) + PROGRAMS = $(bin_PROGRAMS) + am__cpufreq_selector_SOURCES_DIST = cpufreq-selector.c \ + cpufreq-selector.h cpufreq-selector-sysfs.c \ +@@ -89,6 +91,7 @@ + DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles ++am__mv = mv -f + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) + LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +@@ -105,10 +108,22 @@ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +-dbus_confDATA_INSTALL = $(INSTALL_DATA) +-dbus_servicesDATA_INSTALL = $(INSTALL_DATA) +-polkitDATA_INSTALL = $(INSTALL_DATA) ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' + DATA = $(dbus_conf_DATA) $(dbus_services_DATA) $(polkit_DATA) + ETAGS = etags + CTAGS = ctags +@@ -241,6 +256,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -395,9 +411,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu cpufreq/src/cpufreq-selector/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu cpufreq/src/cpufreq-selector/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu cpufreq/src/cpufreq-selector/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu cpufreq/src/cpufreq-selector/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -415,34 +431,50 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" +- @list='$(bin_PROGRAMS)'; for p in $$list; do \ +- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- if test -f $$p \ +- || test -f $$p1 \ +- ; then \ +- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \ +- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \ +- else :; fi; \ +- done ++ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed 's/$(EXEEXT)$$//' | \ ++ while read p p1; do if test -f $$p || test -f $$p1; \ ++ then echo "$$p"; echo "$$p"; else :; fi; \ ++ done | \ ++ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ ++ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ ++ sed 'N;N;N;s,\n, ,g' | \ ++ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ ++ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ ++ if ($$2 == $$4) files[d] = files[d] " " $$1; \ ++ else { print "f", $$3 "/" $$4, $$1; } } \ ++ END { for (d in files) print "f", d, files[d] }' | \ ++ while read type dir files; do \ ++ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ ++ test -z "$$files" || { \ ++ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ ++ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ ++ } \ ++ ; done + + uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) +- @list='$(bin_PROGRAMS)'; for p in $$list; do \ +- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ +- rm -f "$(DESTDIR)$(bindir)/$$f"; \ +- done ++ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ ++ files=`for p in $$list; do echo "$$p"; done | \ ++ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ ++ -e 's/$$/$(EXEEXT)/' `; \ ++ test -n "$$list" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(bindir)" && rm -f $$files + + clean-binPROGRAMS: +- @list='$(bin_PROGRAMS)'; for p in $$list; do \ +- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- echo " rm -f $$p $$f"; \ +- rm -f $$p $$f ; \ +- done ++ @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list || exit $$?; \ ++ test -n "$(EXEEXT)" || exit 0; \ ++ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list + cpufreq-selector$(EXEEXT): $(cpufreq_selector_OBJECTS) $(cpufreq_selector_DEPENDENCIES) + @rm -f cpufreq-selector$(EXEEXT) + $(cpufreq_selector_LINK) $(cpufreq_selector_OBJECTS) $(cpufreq_selector_LDADD) $(LIBS) +@@ -463,21 +495,21 @@ + + .c.o: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c $< + + .c.obj: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: + @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< +@@ -490,54 +522,63 @@ + install-dbus_confDATA: $(dbus_conf_DATA) + @$(NORMAL_INSTALL) + test -z "$(dbus_confdir)" || $(MKDIR_P) "$(DESTDIR)$(dbus_confdir)" +- @list='$(dbus_conf_DATA)'; for p in $$list; do \ ++ @list='$(dbus_conf_DATA)'; test -n "$(dbus_confdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(dbus_confDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(dbus_confdir)/$$f'"; \ +- $(dbus_confDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(dbus_confdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dbus_confdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(dbus_confdir)" || exit $$?; \ + done + + uninstall-dbus_confDATA: + @$(NORMAL_UNINSTALL) +- @list='$(dbus_conf_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(dbus_confdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(dbus_confdir)/$$f"; \ +- done ++ @list='$(dbus_conf_DATA)'; test -n "$(dbus_confdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(dbus_confdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(dbus_confdir)" && rm -f $$files + install-dbus_servicesDATA: $(dbus_services_DATA) + @$(NORMAL_INSTALL) + test -z "$(dbus_servicesdir)" || $(MKDIR_P) "$(DESTDIR)$(dbus_servicesdir)" +- @list='$(dbus_services_DATA)'; for p in $$list; do \ ++ @list='$(dbus_services_DATA)'; test -n "$(dbus_servicesdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(dbus_servicesDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(dbus_servicesdir)/$$f'"; \ +- $(dbus_servicesDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(dbus_servicesdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dbus_servicesdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(dbus_servicesdir)" || exit $$?; \ + done + + uninstall-dbus_servicesDATA: + @$(NORMAL_UNINSTALL) +- @list='$(dbus_services_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(dbus_servicesdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(dbus_servicesdir)/$$f"; \ +- done ++ @list='$(dbus_services_DATA)'; test -n "$(dbus_servicesdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(dbus_servicesdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(dbus_servicesdir)" && rm -f $$files + install-polkitDATA: $(polkit_DATA) + @$(NORMAL_INSTALL) + test -z "$(polkitdir)" || $(MKDIR_P) "$(DESTDIR)$(polkitdir)" +- @list='$(polkit_DATA)'; for p in $$list; do \ ++ @list='$(polkit_DATA)'; test -n "$(polkitdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(polkitDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(polkitdir)/$$f'"; \ +- $(polkitDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(polkitdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(polkitdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(polkitdir)" || exit $$?; \ + done + + uninstall-polkitDATA: + @$(NORMAL_UNINSTALL) +- @list='$(polkit_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(polkitdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(polkitdir)/$$f"; \ +- done ++ @list='$(polkit_DATA)'; test -n "$(polkitdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(polkitdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(polkitdir)" && rm -f $$files + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ +@@ -551,7 +592,7 @@ + + TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ ++ set x; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ +@@ -559,29 +600,34 @@ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ shift; \ ++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique; \ ++ if test $$# -gt 0; then \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ "$$@" $$unique; \ ++ else \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$unique; \ ++ fi; \ + fi + ctags: CTAGS + CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$tags $$unique ++ $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && cd $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) $$here ++ && $(am__cd) $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) "$$here" + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +@@ -602,13 +648,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -642,6 +692,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -663,6 +714,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -672,20 +725,29 @@ + + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: install-binPROGRAMS + @$(NORMAL_INSTALL) + $(MAKE) $(AM_MAKEFLAGS) install-exec-hook +- + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -709,7 +771,7 @@ + uninstall-am: uninstall-binPROGRAMS uninstall-dbus_confDATA \ + uninstall-dbus_servicesDATA uninstall-polkitDATA + +-.MAKE: install-am install-exec-am install-strip ++.MAKE: all check install install-am install-exec-am install-strip + + .PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ + clean-generic clean-libtool ctags distclean distclean-compile \ +@@ -742,6 +804,7 @@ + @HAVE_POLKIT_TRUE@@INTLTOOL_POLICY_RULE@ + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/cpufreq/src/Makefile.in gnome-applets-2.28.0.ubuntu/cpufreq/src/Makefile.in +--- gnome-applets-2.28.0/cpufreq/src/Makefile.in 2009-09-21 08:19:32.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/cpufreq/src/Makefile.in 2009-09-21 12:06:43.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -15,8 +16,9 @@ + @SET_MAKE@ + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -47,8 +49,8 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + am__installdirs = "$(DESTDIR)$(libexecdir)" +-libexecPROGRAMS_INSTALL = $(INSTALL_PROGRAM) + PROGRAMS = $(libexec_PROGRAMS) + am__cpufreq_applet_SOURCES_DIST = cpufreq-applet.c cpufreq-applet.h \ + cpufreq-utils.c cpufreq-utils.h cpufreq-prefs.c \ +@@ -76,6 +78,7 @@ + DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles ++am__mv = mv -f + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) + LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +@@ -96,10 +99,38 @@ + ps-recursive uninstall-recursive + RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive ++AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ ++ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ ++ distdir + ETAGS = etags + CTAGS = ctags + DIST_SUBDIRS = cpufreq-selector + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++am__relativize = \ ++ dir0=`pwd`; \ ++ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ ++ sed_rest='s,^[^/]*/*,,'; \ ++ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ ++ sed_butlast='s,/*[^/]*$$,,'; \ ++ while test -n "$$dir1"; do \ ++ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ ++ if test "$$first" != "."; then \ ++ if test "$$first" = ".."; then \ ++ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ ++ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ ++ else \ ++ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ ++ if test "$$first2" = "$$first"; then \ ++ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ ++ else \ ++ dir2="../$$dir2"; \ ++ fi; \ ++ dir0="$$dir0"/"$$first"; \ ++ fi; \ ++ fi; \ ++ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ ++ done; \ ++ reldir="$$dir2" + pkgdatadir = @pkgdatadir@ + ACLOCAL = @ACLOCAL@ + ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@ +@@ -228,6 +259,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -368,9 +400,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu cpufreq/src/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu cpufreq/src/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu cpufreq/src/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu cpufreq/src/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -388,34 +420,50 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + install-libexecPROGRAMS: $(libexec_PROGRAMS) + @$(NORMAL_INSTALL) + test -z "$(libexecdir)" || $(MKDIR_P) "$(DESTDIR)$(libexecdir)" +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- if test -f $$p \ +- || test -f $$p1 \ +- ; then \ +- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(libexecdir)/$$f'"; \ +- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(libexecdir)/$$f" || exit 1; \ +- else :; fi; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed 's/$(EXEEXT)$$//' | \ ++ while read p p1; do if test -f $$p || test -f $$p1; \ ++ then echo "$$p"; echo "$$p"; else :; fi; \ ++ done | \ ++ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ ++ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ ++ sed 'N;N;N;s,\n, ,g' | \ ++ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ ++ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ ++ if ($$2 == $$4) files[d] = files[d] " " $$1; \ ++ else { print "f", $$3 "/" $$4, $$1; } } \ ++ END { for (d in files) print "f", d, files[d] }' | \ ++ while read type dir files; do \ ++ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ ++ test -z "$$files" || { \ ++ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(libexecdir)$$dir'"; \ ++ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(libexecdir)$$dir" || exit $$?; \ ++ } \ ++ ; done + + uninstall-libexecPROGRAMS: + @$(NORMAL_UNINSTALL) +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " rm -f '$(DESTDIR)$(libexecdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(libexecdir)/$$f"; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ ++ files=`for p in $$list; do echo "$$p"; done | \ ++ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ ++ -e 's/$$/$(EXEEXT)/' `; \ ++ test -n "$$list" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(libexecdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(libexecdir)" && rm -f $$files + + clean-libexecPROGRAMS: +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- echo " rm -f $$p $$f"; \ +- rm -f $$p $$f ; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$$list" || exit 0; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list || exit $$?; \ ++ test -n "$(EXEEXT)" || exit 0; \ ++ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list + cpufreq-applet$(EXEEXT): $(cpufreq_applet_OBJECTS) $(cpufreq_applet_DEPENDENCIES) + @rm -f cpufreq-applet$(EXEEXT) + $(LINK) $(cpufreq_applet_OBJECTS) $(cpufreq_applet_LDADD) $(LIBS) +@@ -440,21 +488,21 @@ + + .c.o: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c $< + + .c.obj: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: + @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< +@@ -489,7 +537,7 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ +@@ -523,16 +571,16 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" + tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) +@@ -547,7 +595,7 @@ + + TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ ++ set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ +@@ -559,7 +607,7 @@ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ +- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ ++ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ +@@ -568,29 +616,34 @@ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ shift; \ ++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique; \ ++ if test $$# -gt 0; then \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ "$$@" $$unique; \ ++ else \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$unique; \ ++ fi; \ + fi + ctags: CTAGS + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$tags $$unique ++ $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && cd $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) $$here ++ && $(am__cd) $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) "$$here" + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +@@ -611,29 +664,44 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ +- distdir=`$(am__cd) $(distdir) && pwd`; \ +- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ +- (cd $$subdir && \ ++ fi; \ ++ done ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ if test "$$subdir" = .; then :; else \ ++ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ ++ $(am__relativize); \ ++ new_distdir=$$reldir; \ ++ dir1=$$subdir; dir2="$(top_distdir)"; \ ++ $(am__relativize); \ ++ new_top_distdir=$$reldir; \ ++ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ ++ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ++ ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ +- top_distdir="$$top_distdir" \ +- distdir="$$distdir/$$subdir" \ ++ top_distdir="$$new_top_distdir" \ ++ distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ ++ am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ +@@ -666,6 +734,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -687,6 +756,8 @@ + + html: html-recursive + ++html-am: ++ + info: info-recursive + + info-am: +@@ -695,18 +766,28 @@ + + install-dvi: install-dvi-recursive + ++install-dvi-am: ++ + install-exec-am: install-libexecPROGRAMS + + install-html: install-html-recursive + ++install-html-am: ++ + install-info: install-info-recursive + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-recursive + ++install-pdf-am: ++ + install-ps: install-ps-recursive + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -729,8 +810,8 @@ + + uninstall-am: uninstall-libexecPROGRAMS + +-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ +- install-strip ++.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ ++ install-am install-strip tags-recursive + + .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic \ +@@ -750,6 +831,7 @@ + + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/drivemount/help/Makefile.in gnome-applets-2.28.0.ubuntu/drivemount/help/Makefile.in +--- gnome-applets-2.28.0/drivemount/help/Makefile.in 2009-09-21 08:19:32.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/drivemount/help/Makefile.in 2009-09-21 12:06:43.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -38,8 +39,9 @@ + + ################################################################################ + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -70,6 +72,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +@@ -201,6 +204,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -423,9 +427,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu drivemount/help/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu drivemount/help/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu drivemount/help/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu drivemount/help/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -443,6 +447,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + mostlyclean-libtool: + -rm -f *.lo +@@ -472,13 +477,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -509,6 +518,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -527,6 +537,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -535,18 +547,28 @@ + + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -957,6 +979,7 @@ + dist-hook: doc-dist-hook + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/drivemount/Makefile.in gnome-applets-2.28.0.ubuntu/drivemount/Makefile.in +--- gnome-applets-2.28.0/drivemount/Makefile.in 2009-09-21 08:19:32.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/drivemount/Makefile.in 2009-09-21 12:06:43.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -16,8 +17,9 @@ + + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -48,9 +50,9 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + am__installdirs = "$(DESTDIR)$(libexecdir)" "$(DESTDIR)$(schemasdir)" \ + "$(DESTDIR)$(serverdir)" "$(DESTDIR)$(uidir)" +-libexecPROGRAMS_INSTALL = $(INSTALL_PROGRAM) + PROGRAMS = $(libexec_PROGRAMS) + am_drivemount_applet2_OBJECTS = drivemount.$(OBJEXT) \ + drive-list.$(OBJEXT) drive-button.$(OBJEXT) +@@ -60,6 +62,7 @@ + DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles ++am__mv = mv -f + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) + LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +@@ -83,17 +86,57 @@ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +-schemasDATA_INSTALL = $(INSTALL_DATA) +-serverDATA_INSTALL = $(INSTALL_DATA) +-uiDATA_INSTALL = $(INSTALL_DATA) ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' + DATA = $(schemas_DATA) $(server_DATA) $(ui_DATA) + RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive ++AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ ++ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ ++ distdir + ETAGS = etags + CTAGS = ctags + DIST_SUBDIRS = $(SUBDIRS) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++am__relativize = \ ++ dir0=`pwd`; \ ++ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ ++ sed_rest='s,^[^/]*/*,,'; \ ++ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ ++ sed_butlast='s,/*[^/]*$$,,'; \ ++ while test -n "$$dir1"; do \ ++ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ ++ if test "$$first" != "."; then \ ++ if test "$$first" = ".."; then \ ++ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ ++ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ ++ else \ ++ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ ++ if test "$$first2" = "$$first"; then \ ++ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ ++ else \ ++ dir2="../$$dir2"; \ ++ fi; \ ++ dir0="$$dir0"/"$$first"; \ ++ fi; \ ++ fi; \ ++ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ ++ done; \ ++ reldir="$$dir2" + pkgdatadir = @pkgdatadir@ + ACLOCAL = @ACLOCAL@ + ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@ +@@ -222,6 +265,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -367,9 +411,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu drivemount/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu drivemount/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu drivemount/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu drivemount/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -387,34 +431,50 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + install-libexecPROGRAMS: $(libexec_PROGRAMS) + @$(NORMAL_INSTALL) + test -z "$(libexecdir)" || $(MKDIR_P) "$(DESTDIR)$(libexecdir)" +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- if test -f $$p \ +- || test -f $$p1 \ +- ; then \ +- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(libexecdir)/$$f'"; \ +- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(libexecdir)/$$f" || exit 1; \ +- else :; fi; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed 's/$(EXEEXT)$$//' | \ ++ while read p p1; do if test -f $$p || test -f $$p1; \ ++ then echo "$$p"; echo "$$p"; else :; fi; \ ++ done | \ ++ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ ++ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ ++ sed 'N;N;N;s,\n, ,g' | \ ++ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ ++ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ ++ if ($$2 == $$4) files[d] = files[d] " " $$1; \ ++ else { print "f", $$3 "/" $$4, $$1; } } \ ++ END { for (d in files) print "f", d, files[d] }' | \ ++ while read type dir files; do \ ++ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ ++ test -z "$$files" || { \ ++ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(libexecdir)$$dir'"; \ ++ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(libexecdir)$$dir" || exit $$?; \ ++ } \ ++ ; done + + uninstall-libexecPROGRAMS: + @$(NORMAL_UNINSTALL) +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " rm -f '$(DESTDIR)$(libexecdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(libexecdir)/$$f"; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ ++ files=`for p in $$list; do echo "$$p"; done | \ ++ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ ++ -e 's/$$/$(EXEEXT)/' `; \ ++ test -n "$$list" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(libexecdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(libexecdir)" && rm -f $$files + + clean-libexecPROGRAMS: +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- echo " rm -f $$p $$f"; \ +- rm -f $$p $$f ; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$$list" || exit 0; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list || exit $$?; \ ++ test -n "$(EXEEXT)" || exit 0; \ ++ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list + drivemount_applet2$(EXEEXT): $(drivemount_applet2_OBJECTS) $(drivemount_applet2_DEPENDENCIES) + @rm -f drivemount_applet2$(EXEEXT) + $(LINK) $(drivemount_applet2_OBJECTS) $(drivemount_applet2_LDADD) $(LIBS) +@@ -431,21 +491,21 @@ + + .c.o: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c $< + + .c.obj: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: + @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< +@@ -458,54 +518,63 @@ + install-schemasDATA: $(schemas_DATA) + @$(NORMAL_INSTALL) + test -z "$(schemasdir)" || $(MKDIR_P) "$(DESTDIR)$(schemasdir)" +- @list='$(schemas_DATA)'; for p in $$list; do \ ++ @list='$(schemas_DATA)'; test -n "$(schemasdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(schemasDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(schemasdir)/$$f'"; \ +- $(schemasDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(schemasdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(schemasdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(schemasdir)" || exit $$?; \ + done + + uninstall-schemasDATA: + @$(NORMAL_UNINSTALL) +- @list='$(schemas_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(schemasdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(schemasdir)/$$f"; \ +- done ++ @list='$(schemas_DATA)'; test -n "$(schemasdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(schemasdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(schemasdir)" && rm -f $$files + install-serverDATA: $(server_DATA) + @$(NORMAL_INSTALL) + test -z "$(serverdir)" || $(MKDIR_P) "$(DESTDIR)$(serverdir)" +- @list='$(server_DATA)'; for p in $$list; do \ ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(serverDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(serverdir)/$$f'"; \ +- $(serverDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(serverdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(serverdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(serverdir)" || exit $$?; \ + done + + uninstall-serverDATA: + @$(NORMAL_UNINSTALL) +- @list='$(server_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(serverdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(serverdir)/$$f"; \ +- done ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(serverdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(serverdir)" && rm -f $$files + install-uiDATA: $(ui_DATA) + @$(NORMAL_INSTALL) + test -z "$(uidir)" || $(MKDIR_P) "$(DESTDIR)$(uidir)" +- @list='$(ui_DATA)'; for p in $$list; do \ ++ @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(uiDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(uidir)/$$f'"; \ +- $(uiDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(uidir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(uidir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(uidir)" || exit $$?; \ + done + + uninstall-uiDATA: + @$(NORMAL_UNINSTALL) +- @list='$(ui_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(uidir)/$$f'"; \ +- rm -f "$(DESTDIR)$(uidir)/$$f"; \ +- done ++ @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(uidir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(uidir)" && rm -f $$files + + # This directory's subdirectories are mostly independent; you can cd + # into them and run `make' without going through this Makefile. +@@ -531,7 +600,7 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ +@@ -565,16 +634,16 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" + tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) +@@ -589,7 +658,7 @@ + + TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ ++ set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ +@@ -601,7 +670,7 @@ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ +- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ ++ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ +@@ -610,29 +679,34 @@ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ shift; \ ++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique; \ ++ if test $$# -gt 0; then \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ "$$@" $$unique; \ ++ else \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$unique; \ ++ fi; \ + fi + ctags: CTAGS + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$tags $$unique ++ $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && cd $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) $$here ++ && $(am__cd) $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) "$$here" + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +@@ -653,29 +727,44 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ +- distdir=`$(am__cd) $(distdir) && pwd`; \ +- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ +- (cd $$subdir && \ ++ fi; \ ++ done ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ if test "$$subdir" = .; then :; else \ ++ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ ++ $(am__relativize); \ ++ new_distdir=$$reldir; \ ++ dir1=$$subdir; dir2="$(top_distdir)"; \ ++ $(am__relativize); \ ++ new_top_distdir=$$reldir; \ ++ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ ++ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ++ ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ +- top_distdir="$$top_distdir" \ +- distdir="$$distdir/$$subdir" \ ++ top_distdir="$$new_top_distdir" \ ++ distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ ++ am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ +@@ -709,6 +798,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -730,6 +820,8 @@ + + html: html-recursive + ++html-am: ++ + info: info-recursive + + info-am: +@@ -739,18 +831,28 @@ + + install-dvi: install-dvi-recursive + ++install-dvi-am: ++ + install-exec-am: install-libexecPROGRAMS + + install-html: install-html-recursive + ++install-html-am: ++ + install-info: install-info-recursive + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-recursive + ++install-pdf-am: ++ + install-ps: install-ps-recursive + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -774,8 +876,8 @@ + uninstall-am: uninstall-libexecPROGRAMS uninstall-schemasDATA \ + uninstall-serverDATA uninstall-uiDATA + +-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ +- install-strip ++.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ ++ install-am install-strip tags-recursive + + .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic \ +@@ -813,6 +915,7 @@ + @GCONF_SCHEMAS_INSTALL_FALSE@install-data-local: + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/geyes/docs/Makefile.in gnome-applets-2.28.0.ubuntu/geyes/docs/Makefile.in +--- gnome-applets-2.28.0/geyes/docs/Makefile.in 2009-09-21 08:19:32.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/geyes/docs/Makefile.in 2009-09-21 12:06:43.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -38,8 +39,9 @@ + + ################################################################################ + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -70,6 +72,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +@@ -201,6 +204,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -418,9 +422,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu geyes/docs/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu geyes/docs/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu geyes/docs/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu geyes/docs/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -438,6 +442,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + mostlyclean-libtool: + -rm -f *.lo +@@ -467,13 +472,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -504,6 +513,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -522,6 +532,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -530,18 +542,28 @@ + + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -952,6 +974,7 @@ + dist-hook: doc-dist-hook + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/geyes/Makefile.in gnome-applets-2.28.0.ubuntu/geyes/Makefile.in +--- gnome-applets-2.28.0/geyes/Makefile.in 2009-09-21 08:19:32.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/geyes/Makefile.in 2009-09-21 12:06:43.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -16,8 +17,9 @@ + + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -49,9 +51,9 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + am__installdirs = "$(DESTDIR)$(libexecdir)" "$(DESTDIR)$(schemasdir)" \ + "$(DESTDIR)$(serverdir)" "$(DESTDIR)$(uidir)" +-libexecPROGRAMS_INSTALL = $(INSTALL_PROGRAM) + PROGRAMS = $(libexec_PROGRAMS) + am_geyes_applet2_OBJECTS = geyes.$(OBJEXT) themes.$(OBJEXT) + geyes_applet2_OBJECTS = $(am_geyes_applet2_OBJECTS) +@@ -60,6 +62,7 @@ + DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles ++am__mv = mv -f + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) + LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +@@ -83,17 +86,57 @@ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +-schemasDATA_INSTALL = $(INSTALL_DATA) +-serverDATA_INSTALL = $(INSTALL_DATA) +-uiDATA_INSTALL = $(INSTALL_DATA) ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' + DATA = $(schemas_DATA) $(server_DATA) $(ui_DATA) + RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive ++AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ ++ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ ++ distdir + ETAGS = etags + CTAGS = ctags + DIST_SUBDIRS = $(SUBDIRS) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++am__relativize = \ ++ dir0=`pwd`; \ ++ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ ++ sed_rest='s,^[^/]*/*,,'; \ ++ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ ++ sed_butlast='s,/*[^/]*$$,,'; \ ++ while test -n "$$dir1"; do \ ++ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ ++ if test "$$first" != "."; then \ ++ if test "$$first" = ".."; then \ ++ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ ++ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ ++ else \ ++ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ ++ if test "$$first2" = "$$first"; then \ ++ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ ++ else \ ++ dir2="../$$dir2"; \ ++ fi; \ ++ dir0="$$dir0"/"$$first"; \ ++ fi; \ ++ fi; \ ++ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ ++ done; \ ++ reldir="$$dir2" + pkgdatadir = @pkgdatadir@ + ACLOCAL = @ACLOCAL@ + ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@ +@@ -222,6 +265,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -378,9 +422,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu geyes/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu geyes/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu geyes/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu geyes/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -398,34 +442,50 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + install-libexecPROGRAMS: $(libexec_PROGRAMS) + @$(NORMAL_INSTALL) + test -z "$(libexecdir)" || $(MKDIR_P) "$(DESTDIR)$(libexecdir)" +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- if test -f $$p \ +- || test -f $$p1 \ +- ; then \ +- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(libexecdir)/$$f'"; \ +- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(libexecdir)/$$f" || exit 1; \ +- else :; fi; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed 's/$(EXEEXT)$$//' | \ ++ while read p p1; do if test -f $$p || test -f $$p1; \ ++ then echo "$$p"; echo "$$p"; else :; fi; \ ++ done | \ ++ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ ++ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ ++ sed 'N;N;N;s,\n, ,g' | \ ++ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ ++ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ ++ if ($$2 == $$4) files[d] = files[d] " " $$1; \ ++ else { print "f", $$3 "/" $$4, $$1; } } \ ++ END { for (d in files) print "f", d, files[d] }' | \ ++ while read type dir files; do \ ++ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ ++ test -z "$$files" || { \ ++ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(libexecdir)$$dir'"; \ ++ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(libexecdir)$$dir" || exit $$?; \ ++ } \ ++ ; done + + uninstall-libexecPROGRAMS: + @$(NORMAL_UNINSTALL) +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " rm -f '$(DESTDIR)$(libexecdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(libexecdir)/$$f"; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ ++ files=`for p in $$list; do echo "$$p"; done | \ ++ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ ++ -e 's/$$/$(EXEEXT)/' `; \ ++ test -n "$$list" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(libexecdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(libexecdir)" && rm -f $$files + + clean-libexecPROGRAMS: +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- echo " rm -f $$p $$f"; \ +- rm -f $$p $$f ; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$$list" || exit 0; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list || exit $$?; \ ++ test -n "$(EXEEXT)" || exit 0; \ ++ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list + geyes_applet2$(EXEEXT): $(geyes_applet2_OBJECTS) $(geyes_applet2_DEPENDENCIES) + @rm -f geyes_applet2$(EXEEXT) + $(LINK) $(geyes_applet2_OBJECTS) $(geyes_applet2_LDADD) $(LIBS) +@@ -441,21 +501,21 @@ + + .c.o: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c $< + + .c.obj: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: + @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< +@@ -468,54 +528,63 @@ + install-schemasDATA: $(schemas_DATA) + @$(NORMAL_INSTALL) + test -z "$(schemasdir)" || $(MKDIR_P) "$(DESTDIR)$(schemasdir)" +- @list='$(schemas_DATA)'; for p in $$list; do \ ++ @list='$(schemas_DATA)'; test -n "$(schemasdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(schemasDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(schemasdir)/$$f'"; \ +- $(schemasDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(schemasdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(schemasdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(schemasdir)" || exit $$?; \ + done + + uninstall-schemasDATA: + @$(NORMAL_UNINSTALL) +- @list='$(schemas_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(schemasdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(schemasdir)/$$f"; \ +- done ++ @list='$(schemas_DATA)'; test -n "$(schemasdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(schemasdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(schemasdir)" && rm -f $$files + install-serverDATA: $(server_DATA) + @$(NORMAL_INSTALL) + test -z "$(serverdir)" || $(MKDIR_P) "$(DESTDIR)$(serverdir)" +- @list='$(server_DATA)'; for p in $$list; do \ ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(serverDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(serverdir)/$$f'"; \ +- $(serverDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(serverdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(serverdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(serverdir)" || exit $$?; \ + done + + uninstall-serverDATA: + @$(NORMAL_UNINSTALL) +- @list='$(server_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(serverdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(serverdir)/$$f"; \ +- done ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(serverdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(serverdir)" && rm -f $$files + install-uiDATA: $(ui_DATA) + @$(NORMAL_INSTALL) + test -z "$(uidir)" || $(MKDIR_P) "$(DESTDIR)$(uidir)" +- @list='$(ui_DATA)'; for p in $$list; do \ ++ @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(uiDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(uidir)/$$f'"; \ +- $(uiDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(uidir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(uidir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(uidir)" || exit $$?; \ + done + + uninstall-uiDATA: + @$(NORMAL_UNINSTALL) +- @list='$(ui_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(uidir)/$$f'"; \ +- rm -f "$(DESTDIR)$(uidir)/$$f"; \ +- done ++ @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(uidir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(uidir)" && rm -f $$files + + # This directory's subdirectories are mostly independent; you can cd + # into them and run `make' without going through this Makefile. +@@ -541,7 +610,7 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ +@@ -575,16 +644,16 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" + tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) +@@ -599,7 +668,7 @@ + + TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ ++ set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ +@@ -611,7 +680,7 @@ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ +- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ ++ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ +@@ -620,29 +689,34 @@ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ shift; \ ++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique; \ ++ if test $$# -gt 0; then \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ "$$@" $$unique; \ ++ else \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$unique; \ ++ fi; \ + fi + ctags: CTAGS + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$tags $$unique ++ $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && cd $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) $$here ++ && $(am__cd) $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) "$$here" + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +@@ -663,29 +737,44 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ +- distdir=`$(am__cd) $(distdir) && pwd`; \ +- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ +- (cd $$subdir && \ ++ fi; \ ++ done ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ if test "$$subdir" = .; then :; else \ ++ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ ++ $(am__relativize); \ ++ new_distdir=$$reldir; \ ++ dir1=$$subdir; dir2="$(top_distdir)"; \ ++ $(am__relativize); \ ++ new_top_distdir=$$reldir; \ ++ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ ++ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ++ ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ +- top_distdir="$$top_distdir" \ +- distdir="$$distdir/$$subdir" \ ++ top_distdir="$$new_top_distdir" \ ++ distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ ++ am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ +@@ -719,6 +808,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -740,6 +830,8 @@ + + html: html-recursive + ++html-am: ++ + info: info-recursive + + info-am: +@@ -749,18 +841,28 @@ + + install-dvi: install-dvi-recursive + ++install-dvi-am: ++ + install-exec-am: install-libexecPROGRAMS + + install-html: install-html-recursive + ++install-html-am: ++ + install-info: install-info-recursive + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-recursive + ++install-pdf-am: ++ + install-ps: install-ps-recursive + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -784,8 +886,8 @@ + uninstall-am: uninstall-libexecPROGRAMS uninstall-local \ + uninstall-schemasDATA uninstall-serverDATA uninstall-uiDATA + +-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ +- install-strip ++.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ ++ install-am install-strip tags-recursive + + .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic \ +@@ -857,6 +959,7 @@ + @GCONF_SCHEMAS_INSTALL_TRUE@ GCONF_CONFIG_SOURCE=$(GCONF_SCHEMA_CONFIG_SOURCE) $(GCONFTOOL) --makefile-install-rule $(schemas_DATA) ; + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/geyes/themes/Makefile.in gnome-applets-2.28.0.ubuntu/geyes/themes/Makefile.in +--- gnome-applets-2.28.0/geyes/themes/Makefile.in 2009-09-21 08:19:32.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/geyes/themes/Makefile.in 2009-09-21 12:06:43.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -17,8 +18,9 @@ + #SUBDIRS = Default Default-tiny Bizarre Bloodshot Horrid + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -48,6 +50,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +@@ -55,17 +58,26 @@ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' + am__installdirs = "$(DESTDIR)$(Bizarredir)" \ + "$(DESTDIR)$(Bloodshotdir)" "$(DESTDIR)$(Defaultdir)" \ + "$(DESTDIR)$(Default_tinydir)" "$(DESTDIR)$(Horriddir)" \ + "$(DESTDIR)$(Tangodir)" +-BizarreDATA_INSTALL = $(INSTALL_DATA) +-BloodshotDATA_INSTALL = $(INSTALL_DATA) +-DefaultDATA_INSTALL = $(INSTALL_DATA) +-Default_tinyDATA_INSTALL = $(INSTALL_DATA) +-HorridDATA_INSTALL = $(INSTALL_DATA) +-TangoDATA_INSTALL = $(INSTALL_DATA) + DATA = $(Bizarre_DATA) $(Bloodshot_DATA) $(Default_DATA) \ + $(Default_tiny_DATA) $(Horrid_DATA) $(Tango_DATA) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +@@ -197,6 +209,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -342,9 +355,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu geyes/themes/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu geyes/themes/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu geyes/themes/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu geyes/themes/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -362,6 +375,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + mostlyclean-libtool: + -rm -f *.lo +@@ -371,105 +385,123 @@ + install-BizarreDATA: $(Bizarre_DATA) + @$(NORMAL_INSTALL) + test -z "$(Bizarredir)" || $(MKDIR_P) "$(DESTDIR)$(Bizarredir)" +- @list='$(Bizarre_DATA)'; for p in $$list; do \ ++ @list='$(Bizarre_DATA)'; test -n "$(Bizarredir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(BizarreDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(Bizarredir)/$$f'"; \ +- $(BizarreDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(Bizarredir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(Bizarredir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(Bizarredir)" || exit $$?; \ + done + + uninstall-BizarreDATA: + @$(NORMAL_UNINSTALL) +- @list='$(Bizarre_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(Bizarredir)/$$f'"; \ +- rm -f "$(DESTDIR)$(Bizarredir)/$$f"; \ +- done ++ @list='$(Bizarre_DATA)'; test -n "$(Bizarredir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(Bizarredir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(Bizarredir)" && rm -f $$files + install-BloodshotDATA: $(Bloodshot_DATA) + @$(NORMAL_INSTALL) + test -z "$(Bloodshotdir)" || $(MKDIR_P) "$(DESTDIR)$(Bloodshotdir)" +- @list='$(Bloodshot_DATA)'; for p in $$list; do \ ++ @list='$(Bloodshot_DATA)'; test -n "$(Bloodshotdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(BloodshotDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(Bloodshotdir)/$$f'"; \ +- $(BloodshotDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(Bloodshotdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(Bloodshotdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(Bloodshotdir)" || exit $$?; \ + done + + uninstall-BloodshotDATA: + @$(NORMAL_UNINSTALL) +- @list='$(Bloodshot_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(Bloodshotdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(Bloodshotdir)/$$f"; \ +- done ++ @list='$(Bloodshot_DATA)'; test -n "$(Bloodshotdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(Bloodshotdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(Bloodshotdir)" && rm -f $$files + install-DefaultDATA: $(Default_DATA) + @$(NORMAL_INSTALL) + test -z "$(Defaultdir)" || $(MKDIR_P) "$(DESTDIR)$(Defaultdir)" +- @list='$(Default_DATA)'; for p in $$list; do \ ++ @list='$(Default_DATA)'; test -n "$(Defaultdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(DefaultDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(Defaultdir)/$$f'"; \ +- $(DefaultDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(Defaultdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(Defaultdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(Defaultdir)" || exit $$?; \ + done + + uninstall-DefaultDATA: + @$(NORMAL_UNINSTALL) +- @list='$(Default_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(Defaultdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(Defaultdir)/$$f"; \ +- done ++ @list='$(Default_DATA)'; test -n "$(Defaultdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(Defaultdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(Defaultdir)" && rm -f $$files + install-Default_tinyDATA: $(Default_tiny_DATA) + @$(NORMAL_INSTALL) + test -z "$(Default_tinydir)" || $(MKDIR_P) "$(DESTDIR)$(Default_tinydir)" +- @list='$(Default_tiny_DATA)'; for p in $$list; do \ ++ @list='$(Default_tiny_DATA)'; test -n "$(Default_tinydir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(Default_tinyDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(Default_tinydir)/$$f'"; \ +- $(Default_tinyDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(Default_tinydir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(Default_tinydir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(Default_tinydir)" || exit $$?; \ + done + + uninstall-Default_tinyDATA: + @$(NORMAL_UNINSTALL) +- @list='$(Default_tiny_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(Default_tinydir)/$$f'"; \ +- rm -f "$(DESTDIR)$(Default_tinydir)/$$f"; \ +- done ++ @list='$(Default_tiny_DATA)'; test -n "$(Default_tinydir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(Default_tinydir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(Default_tinydir)" && rm -f $$files + install-HorridDATA: $(Horrid_DATA) + @$(NORMAL_INSTALL) + test -z "$(Horriddir)" || $(MKDIR_P) "$(DESTDIR)$(Horriddir)" +- @list='$(Horrid_DATA)'; for p in $$list; do \ ++ @list='$(Horrid_DATA)'; test -n "$(Horriddir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(HorridDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(Horriddir)/$$f'"; \ +- $(HorridDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(Horriddir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(Horriddir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(Horriddir)" || exit $$?; \ + done + + uninstall-HorridDATA: + @$(NORMAL_UNINSTALL) +- @list='$(Horrid_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(Horriddir)/$$f'"; \ +- rm -f "$(DESTDIR)$(Horriddir)/$$f"; \ +- done ++ @list='$(Horrid_DATA)'; test -n "$(Horriddir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(Horriddir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(Horriddir)" && rm -f $$files + install-TangoDATA: $(Tango_DATA) + @$(NORMAL_INSTALL) + test -z "$(Tangodir)" || $(MKDIR_P) "$(DESTDIR)$(Tangodir)" +- @list='$(Tango_DATA)'; for p in $$list; do \ ++ @list='$(Tango_DATA)'; test -n "$(Tangodir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(TangoDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(Tangodir)/$$f'"; \ +- $(TangoDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(Tangodir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(Tangodir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(Tangodir)" || exit $$?; \ + done + + uninstall-TangoDATA: + @$(NORMAL_UNINSTALL) +- @list='$(Tango_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(Tangodir)/$$f'"; \ +- rm -f "$(DESTDIR)$(Tangodir)/$$f"; \ +- done ++ @list='$(Tango_DATA)'; test -n "$(Tangodir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(Tangodir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(Tangodir)" && rm -f $$files + tags: TAGS + TAGS: + +@@ -493,13 +525,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -530,6 +566,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -548,6 +585,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -558,18 +597,28 @@ + + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -612,6 +661,7 @@ + + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/gkb-new/Makefile.in gnome-applets-2.28.0.ubuntu/gkb-new/Makefile.in +--- gnome-applets-2.28.0/gkb-new/Makefile.in 2009-09-21 08:19:32.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/gkb-new/Makefile.in 2009-09-21 12:06:43.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,8 +15,9 @@ + + @SET_MAKE@ + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -46,6 +48,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ +@@ -57,10 +60,38 @@ + ps-recursive uninstall-recursive + RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive ++AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ ++ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ ++ distdir + ETAGS = etags + CTAGS = ctags + DIST_SUBDIRS = xmodmap xmodmap.sun + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++am__relativize = \ ++ dir0=`pwd`; \ ++ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ ++ sed_rest='s,^[^/]*/*,,'; \ ++ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ ++ sed_butlast='s,/*[^/]*$$,,'; \ ++ while test -n "$$dir1"; do \ ++ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ ++ if test "$$first" != "."; then \ ++ if test "$$first" = ".."; then \ ++ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ ++ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ ++ else \ ++ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ ++ if test "$$first2" = "$$first"; then \ ++ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ ++ else \ ++ dir2="../$$dir2"; \ ++ fi; \ ++ dir0="$$dir0"/"$$first"; \ ++ fi; \ ++ fi; \ ++ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ ++ done; \ ++ reldir="$$dir2" + pkgdatadir = @pkgdatadir@ + ACLOCAL = @ACLOCAL@ + ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@ +@@ -189,6 +220,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -304,9 +336,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu gkb-new/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu gkb-new/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu gkb-new/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu gkb-new/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -324,6 +356,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + mostlyclean-libtool: + -rm -f *.lo +@@ -355,7 +388,7 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ +@@ -389,16 +422,16 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" + tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) +@@ -413,7 +446,7 @@ + + TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ ++ set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ +@@ -425,7 +458,7 @@ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ +- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ ++ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ +@@ -434,29 +467,34 @@ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ shift; \ ++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique; \ ++ if test $$# -gt 0; then \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ "$$@" $$unique; \ ++ else \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$unique; \ ++ fi; \ + fi + ctags: CTAGS + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$tags $$unique ++ $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && cd $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) $$here ++ && $(am__cd) $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) "$$here" + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +@@ -477,29 +515,44 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ +- distdir=`$(am__cd) $(distdir) && pwd`; \ +- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ +- (cd $$subdir && \ ++ fi; \ ++ done ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ if test "$$subdir" = .; then :; else \ ++ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ ++ $(am__relativize); \ ++ new_distdir=$$reldir; \ ++ dir1=$$subdir; dir2="$(top_distdir)"; \ ++ $(am__relativize); \ ++ new_top_distdir=$$reldir; \ ++ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ ++ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ++ ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ +- top_distdir="$$top_distdir" \ +- distdir="$$distdir/$$subdir" \ ++ top_distdir="$$new_top_distdir" \ ++ distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ ++ am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ +@@ -529,6 +582,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -547,6 +601,8 @@ + + html: html-recursive + ++html-am: ++ + info: info-recursive + + info-am: +@@ -555,18 +611,28 @@ + + install-dvi: install-dvi-recursive + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-recursive + ++install-html-am: ++ + install-info: install-info-recursive + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-recursive + ++install-pdf-am: ++ + install-ps: install-ps-recursive + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -587,8 +653,8 @@ + + uninstall-am: + +-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ +- install-strip ++.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ ++ install-am install-strip tags-recursive + + .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic clean-libtool \ +@@ -606,6 +672,7 @@ + + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/gkb-new/xmodmap/Makefile.in gnome-applets-2.28.0.ubuntu/gkb-new/xmodmap/Makefile.in +--- gnome-applets-2.28.0/gkb-new/xmodmap/Makefile.in 2009-09-21 08:19:33.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/gkb-new/xmodmap/Makefile.in 2009-09-21 12:06:43.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -15,8 +16,9 @@ + @SET_MAKE@ + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -46,6 +48,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +@@ -53,9 +56,23 @@ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' + am__installdirs = "$(DESTDIR)$(gkbmapsdir)" +-gkbmapsDATA_INSTALL = $(INSTALL_DATA) + DATA = $(gkbmaps_DATA) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + pkgdatadir = @pkgdatadir@ +@@ -186,6 +203,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -325,9 +343,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu gkb-new/xmodmap/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu gkb-new/xmodmap/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu gkb-new/xmodmap/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu gkb-new/xmodmap/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -345,6 +363,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + mostlyclean-libtool: + -rm -f *.lo +@@ -354,20 +373,23 @@ + install-gkbmapsDATA: $(gkbmaps_DATA) + @$(NORMAL_INSTALL) + test -z "$(gkbmapsdir)" || $(MKDIR_P) "$(DESTDIR)$(gkbmapsdir)" +- @list='$(gkbmaps_DATA)'; for p in $$list; do \ ++ @list='$(gkbmaps_DATA)'; test -n "$(gkbmapsdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(gkbmapsDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(gkbmapsdir)/$$f'"; \ +- $(gkbmapsDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(gkbmapsdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(gkbmapsdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(gkbmapsdir)" || exit $$?; \ + done + + uninstall-gkbmapsDATA: + @$(NORMAL_UNINSTALL) +- @list='$(gkbmaps_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(gkbmapsdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(gkbmapsdir)/$$f"; \ +- done ++ @list='$(gkbmaps_DATA)'; test -n "$(gkbmapsdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(gkbmapsdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(gkbmapsdir)" && rm -f $$files + tags: TAGS + TAGS: + +@@ -391,13 +413,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -429,6 +455,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -447,6 +474,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -455,18 +484,28 @@ + + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -507,6 +546,7 @@ + -c $(top_srcdir)/po/.intltool-merge-cache + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/gkb-new/xmodmap.sun/Makefile.in gnome-applets-2.28.0.ubuntu/gkb-new/xmodmap.sun/Makefile.in +--- gnome-applets-2.28.0/gkb-new/xmodmap.sun/Makefile.in 2009-09-21 08:19:33.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/gkb-new/xmodmap.sun/Makefile.in 2009-09-21 12:06:43.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -15,8 +16,9 @@ + @SET_MAKE@ + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -46,6 +48,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +@@ -53,9 +56,23 @@ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' + am__installdirs = "$(DESTDIR)$(gkbmapsdir)" +-gkbmapsDATA_INSTALL = $(INSTALL_DATA) + DATA = $(gkbmaps_DATA) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + pkgdatadir = @pkgdatadir@ +@@ -186,6 +203,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -364,9 +382,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu gkb-new/xmodmap.sun/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu gkb-new/xmodmap.sun/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu gkb-new/xmodmap.sun/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu gkb-new/xmodmap.sun/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -384,6 +402,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + mostlyclean-libtool: + -rm -f *.lo +@@ -393,20 +412,23 @@ + install-gkbmapsDATA: $(gkbmaps_DATA) + @$(NORMAL_INSTALL) + test -z "$(gkbmapsdir)" || $(MKDIR_P) "$(DESTDIR)$(gkbmapsdir)" +- @list='$(gkbmaps_DATA)'; for p in $$list; do \ ++ @list='$(gkbmaps_DATA)'; test -n "$(gkbmapsdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(gkbmapsDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(gkbmapsdir)/$$f'"; \ +- $(gkbmapsDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(gkbmapsdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(gkbmapsdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(gkbmapsdir)" || exit $$?; \ + done + + uninstall-gkbmapsDATA: + @$(NORMAL_UNINSTALL) +- @list='$(gkbmaps_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(gkbmapsdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(gkbmapsdir)/$$f"; \ +- done ++ @list='$(gkbmaps_DATA)'; test -n "$(gkbmapsdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(gkbmapsdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(gkbmapsdir)" && rm -f $$files + tags: TAGS + TAGS: + +@@ -430,13 +452,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -467,6 +493,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -485,6 +512,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -493,18 +522,28 @@ + + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -545,6 +584,7 @@ + -c $(top_srcdir)/po/.intltool-merge-cache + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/gswitchit/help/Makefile.in gnome-applets-2.28.0.ubuntu/gswitchit/help/Makefile.in +--- gnome-applets-2.28.0/gswitchit/help/Makefile.in 2009-09-21 08:19:33.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/gswitchit/help/Makefile.in 2009-09-21 12:06:43.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -38,8 +39,9 @@ + + ################################################################################ + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -70,6 +72,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +@@ -201,6 +204,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -417,9 +421,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu gswitchit/help/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu gswitchit/help/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu gswitchit/help/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu gswitchit/help/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -437,6 +441,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + mostlyclean-libtool: + -rm -f *.lo +@@ -466,13 +471,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -503,6 +512,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -521,6 +531,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -529,18 +541,28 @@ + + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -951,6 +973,7 @@ + dist-hook: doc-dist-hook + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/gswitchit/Makefile.in gnome-applets-2.28.0.ubuntu/gswitchit/Makefile.in +--- gnome-applets-2.28.0/gswitchit/Makefile.in 2009-09-21 08:19:33.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/gswitchit/Makefile.in 2009-09-21 12:06:43.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -17,8 +18,9 @@ + + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -49,6 +51,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + LIBRARIES = $(noinst_LIBRARIES) + ARFLAGS = cru + libgswitchit_applet_a_AR = $(AR) $(ARFLAGS) +@@ -58,7 +61,6 @@ + libgswitchit_applet_a_OBJECTS = $(am_libgswitchit_applet_a_OBJECTS) + am__installdirs = "$(DESTDIR)$(libexecdir)" "$(DESTDIR)$(builderdir)" \ + "$(DESTDIR)$(serverdir)" "$(DESTDIR)$(uidir)" +-libexecPROGRAMS_INSTALL = $(INSTALL_PROGRAM) + PROGRAMS = $(libexec_PROGRAMS) + am_gnome_keyboard_applet_OBJECTS = \ + gnome_keyboard_applet-switch.$(OBJEXT) +@@ -74,6 +76,7 @@ + DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles ++am__mv = mv -f + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) + LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +@@ -99,17 +102,57 @@ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +-builderDATA_INSTALL = $(INSTALL_DATA) +-serverDATA_INSTALL = $(INSTALL_DATA) +-uiDATA_INSTALL = $(INSTALL_DATA) ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' + DATA = $(builder_DATA) $(server_DATA) $(ui_DATA) + RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive ++AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ ++ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ ++ distdir + ETAGS = etags + CTAGS = ctags + DIST_SUBDIRS = $(SUBDIRS) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++am__relativize = \ ++ dir0=`pwd`; \ ++ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ ++ sed_rest='s,^[^/]*/*,,'; \ ++ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ ++ sed_butlast='s,/*[^/]*$$,,'; \ ++ while test -n "$$dir1"; do \ ++ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ ++ if test "$$first" != "."; then \ ++ if test "$$first" = ".."; then \ ++ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ ++ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ ++ else \ ++ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ ++ if test "$$first2" = "$$first"; then \ ++ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ ++ else \ ++ dir2="../$$dir2"; \ ++ fi; \ ++ dir0="$$dir0"/"$$first"; \ ++ fi; \ ++ fi; \ ++ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ ++ done; \ ++ reldir="$$dir2" + pkgdatadir = @pkgdatadir@ + ACLOCAL = @ACLOCAL@ + ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@ +@@ -238,6 +281,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -391,9 +435,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu gswitchit/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu gswitchit/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu gswitchit/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu gswitchit/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -411,6 +455,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + clean-noinstLIBRARIES: + -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES) +@@ -421,31 +466,46 @@ + install-libexecPROGRAMS: $(libexec_PROGRAMS) + @$(NORMAL_INSTALL) + test -z "$(libexecdir)" || $(MKDIR_P) "$(DESTDIR)$(libexecdir)" +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- if test -f $$p \ +- || test -f $$p1 \ +- ; then \ +- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(libexecdir)/$$f'"; \ +- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(libexecdir)/$$f" || exit 1; \ +- else :; fi; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed 's/$(EXEEXT)$$//' | \ ++ while read p p1; do if test -f $$p || test -f $$p1; \ ++ then echo "$$p"; echo "$$p"; else :; fi; \ ++ done | \ ++ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ ++ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ ++ sed 'N;N;N;s,\n, ,g' | \ ++ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ ++ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ ++ if ($$2 == $$4) files[d] = files[d] " " $$1; \ ++ else { print "f", $$3 "/" $$4, $$1; } } \ ++ END { for (d in files) print "f", d, files[d] }' | \ ++ while read type dir files; do \ ++ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ ++ test -z "$$files" || { \ ++ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(libexecdir)$$dir'"; \ ++ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(libexecdir)$$dir" || exit $$?; \ ++ } \ ++ ; done + + uninstall-libexecPROGRAMS: + @$(NORMAL_UNINSTALL) +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " rm -f '$(DESTDIR)$(libexecdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(libexecdir)/$$f"; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ ++ files=`for p in $$list; do echo "$$p"; done | \ ++ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ ++ -e 's/$$/$(EXEEXT)/' `; \ ++ test -n "$$list" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(libexecdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(libexecdir)" && rm -f $$files + + clean-libexecPROGRAMS: +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- echo " rm -f $$p $$f"; \ +- rm -f $$p $$f ; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$$list" || exit 0; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list || exit $$?; \ ++ test -n "$(EXEEXT)" || exit 0; \ ++ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list + gnome-keyboard-applet$(EXEEXT): $(gnome_keyboard_applet_OBJECTS) $(gnome_keyboard_applet_DEPENDENCIES) + @rm -f gnome-keyboard-applet$(EXEEXT) + $(gnome_keyboard_applet_LINK) $(gnome_keyboard_applet_OBJECTS) $(gnome_keyboard_applet_LDADD) $(LIBS) +@@ -461,49 +521,49 @@ + + .c.o: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c $< + + .c.obj: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: + @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< + + libgswitchit_applet_a-gswitchit-applet.o: gswitchit-applet.c + @am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgswitchit_applet_a_CFLAGS) $(CFLAGS) -MT libgswitchit_applet_a-gswitchit-applet.o -MD -MP -MF $(DEPDIR)/libgswitchit_applet_a-gswitchit-applet.Tpo -c -o libgswitchit_applet_a-gswitchit-applet.o `test -f 'gswitchit-applet.c' || echo '$(srcdir)/'`gswitchit-applet.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libgswitchit_applet_a-gswitchit-applet.Tpo $(DEPDIR)/libgswitchit_applet_a-gswitchit-applet.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libgswitchit_applet_a-gswitchit-applet.Tpo $(DEPDIR)/libgswitchit_applet_a-gswitchit-applet.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gswitchit-applet.c' object='libgswitchit_applet_a-gswitchit-applet.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgswitchit_applet_a_CFLAGS) $(CFLAGS) -c -o libgswitchit_applet_a-gswitchit-applet.o `test -f 'gswitchit-applet.c' || echo '$(srcdir)/'`gswitchit-applet.c + + libgswitchit_applet_a-gswitchit-applet.obj: gswitchit-applet.c + @am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgswitchit_applet_a_CFLAGS) $(CFLAGS) -MT libgswitchit_applet_a-gswitchit-applet.obj -MD -MP -MF $(DEPDIR)/libgswitchit_applet_a-gswitchit-applet.Tpo -c -o libgswitchit_applet_a-gswitchit-applet.obj `if test -f 'gswitchit-applet.c'; then $(CYGPATH_W) 'gswitchit-applet.c'; else $(CYGPATH_W) '$(srcdir)/gswitchit-applet.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libgswitchit_applet_a-gswitchit-applet.Tpo $(DEPDIR)/libgswitchit_applet_a-gswitchit-applet.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libgswitchit_applet_a-gswitchit-applet.Tpo $(DEPDIR)/libgswitchit_applet_a-gswitchit-applet.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gswitchit-applet.c' object='libgswitchit_applet_a-gswitchit-applet.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgswitchit_applet_a_CFLAGS) $(CFLAGS) -c -o libgswitchit_applet_a-gswitchit-applet.obj `if test -f 'gswitchit-applet.c'; then $(CYGPATH_W) 'gswitchit-applet.c'; else $(CYGPATH_W) '$(srcdir)/gswitchit-applet.c'; fi` + + gnome_keyboard_applet-switch.o: switch.c + @am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gnome_keyboard_applet_CFLAGS) $(CFLAGS) -MT gnome_keyboard_applet-switch.o -MD -MP -MF $(DEPDIR)/gnome_keyboard_applet-switch.Tpo -c -o gnome_keyboard_applet-switch.o `test -f 'switch.c' || echo '$(srcdir)/'`switch.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_keyboard_applet-switch.Tpo $(DEPDIR)/gnome_keyboard_applet-switch.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/gnome_keyboard_applet-switch.Tpo $(DEPDIR)/gnome_keyboard_applet-switch.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='switch.c' object='gnome_keyboard_applet-switch.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gnome_keyboard_applet_CFLAGS) $(CFLAGS) -c -o gnome_keyboard_applet-switch.o `test -f 'switch.c' || echo '$(srcdir)/'`switch.c + + gnome_keyboard_applet-switch.obj: switch.c + @am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gnome_keyboard_applet_CFLAGS) $(CFLAGS) -MT gnome_keyboard_applet-switch.obj -MD -MP -MF $(DEPDIR)/gnome_keyboard_applet-switch.Tpo -c -o gnome_keyboard_applet-switch.obj `if test -f 'switch.c'; then $(CYGPATH_W) 'switch.c'; else $(CYGPATH_W) '$(srcdir)/switch.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_keyboard_applet-switch.Tpo $(DEPDIR)/gnome_keyboard_applet-switch.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/gnome_keyboard_applet-switch.Tpo $(DEPDIR)/gnome_keyboard_applet-switch.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='switch.c' object='gnome_keyboard_applet-switch.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gnome_keyboard_applet_CFLAGS) $(CFLAGS) -c -o gnome_keyboard_applet-switch.obj `if test -f 'switch.c'; then $(CYGPATH_W) 'switch.c'; else $(CYGPATH_W) '$(srcdir)/switch.c'; fi` +@@ -516,54 +576,63 @@ + install-builderDATA: $(builder_DATA) + @$(NORMAL_INSTALL) + test -z "$(builderdir)" || $(MKDIR_P) "$(DESTDIR)$(builderdir)" +- @list='$(builder_DATA)'; for p in $$list; do \ ++ @list='$(builder_DATA)'; test -n "$(builderdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(builderDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(builderdir)/$$f'"; \ +- $(builderDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(builderdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(builderdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(builderdir)" || exit $$?; \ + done + + uninstall-builderDATA: + @$(NORMAL_UNINSTALL) +- @list='$(builder_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(builderdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(builderdir)/$$f"; \ +- done ++ @list='$(builder_DATA)'; test -n "$(builderdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(builderdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(builderdir)" && rm -f $$files + install-serverDATA: $(server_DATA) + @$(NORMAL_INSTALL) + test -z "$(serverdir)" || $(MKDIR_P) "$(DESTDIR)$(serverdir)" +- @list='$(server_DATA)'; for p in $$list; do \ ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(serverDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(serverdir)/$$f'"; \ +- $(serverDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(serverdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(serverdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(serverdir)" || exit $$?; \ + done + + uninstall-serverDATA: + @$(NORMAL_UNINSTALL) +- @list='$(server_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(serverdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(serverdir)/$$f"; \ +- done ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(serverdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(serverdir)" && rm -f $$files + install-uiDATA: $(ui_DATA) + @$(NORMAL_INSTALL) + test -z "$(uidir)" || $(MKDIR_P) "$(DESTDIR)$(uidir)" +- @list='$(ui_DATA)'; for p in $$list; do \ ++ @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(uiDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(uidir)/$$f'"; \ +- $(uiDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(uidir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(uidir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(uidir)" || exit $$?; \ + done + + uninstall-uiDATA: + @$(NORMAL_UNINSTALL) +- @list='$(ui_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(uidir)/$$f'"; \ +- rm -f "$(DESTDIR)$(uidir)/$$f"; \ +- done ++ @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(uidir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(uidir)" && rm -f $$files + + # This directory's subdirectories are mostly independent; you can cd + # into them and run `make' without going through this Makefile. +@@ -589,7 +658,7 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ +@@ -623,16 +692,16 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" + tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) +@@ -647,7 +716,7 @@ + + TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ ++ set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ +@@ -659,7 +728,7 @@ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ +- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ ++ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ +@@ -668,29 +737,34 @@ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ shift; \ ++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique; \ ++ if test $$# -gt 0; then \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ "$$@" $$unique; \ ++ else \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$unique; \ ++ fi; \ + fi + ctags: CTAGS + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$tags $$unique ++ $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && cd $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) $$here ++ && $(am__cd) $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) "$$here" + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +@@ -711,29 +785,44 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ +- distdir=`$(am__cd) $(distdir) && pwd`; \ +- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ +- (cd $$subdir && \ ++ fi; \ ++ done ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ if test "$$subdir" = .; then :; else \ ++ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ ++ $(am__relativize); \ ++ new_distdir=$$reldir; \ ++ dir1=$$subdir; dir2="$(top_distdir)"; \ ++ $(am__relativize); \ ++ new_top_distdir=$$reldir; \ ++ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ ++ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ++ ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ +- top_distdir="$$top_distdir" \ +- distdir="$$distdir/$$subdir" \ ++ top_distdir="$$new_top_distdir" \ ++ distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ ++ am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ +@@ -767,6 +856,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -788,6 +878,8 @@ + + html: html-recursive + ++html-am: ++ + info: info-recursive + + info-am: +@@ -796,18 +888,28 @@ + + install-dvi: install-dvi-recursive + ++install-dvi-am: ++ + install-exec-am: install-libexecPROGRAMS + + install-html: install-html-recursive + ++install-html-am: ++ + install-info: install-info-recursive + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-recursive + ++install-pdf-am: ++ + install-ps: install-ps-recursive + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -831,8 +933,8 @@ + uninstall-am: uninstall-builderDATA uninstall-libexecPROGRAMS \ + uninstall-serverDATA uninstall-uiDATA + +-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ +- install-strip ++.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ ++ install-am install-strip tags-recursive + + .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic \ +@@ -860,6 +962,7 @@ + @INTLTOOL_SERVER_RULE@ + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/gweather/docs/Makefile.in gnome-applets-2.28.0.ubuntu/gweather/docs/Makefile.in +--- gnome-applets-2.28.0/gweather/docs/Makefile.in 2009-09-21 08:19:33.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/gweather/docs/Makefile.in 2009-09-21 12:06:44.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -38,8 +39,9 @@ + + ################################################################################ + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -70,6 +72,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +@@ -201,6 +204,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -432,9 +436,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu gweather/docs/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu gweather/docs/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu gweather/docs/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu gweather/docs/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -452,6 +456,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + mostlyclean-libtool: + -rm -f *.lo +@@ -481,13 +486,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -518,6 +527,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -536,6 +546,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -544,18 +556,28 @@ + + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -966,6 +988,7 @@ + dist-hook: doc-dist-hook + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/gweather/Makefile.in gnome-applets-2.28.0.ubuntu/gweather/Makefile.in +--- gnome-applets-2.28.0/gweather/Makefile.in 2009-09-21 08:19:33.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/gweather/Makefile.in 2009-09-21 12:06:44.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -16,8 +17,9 @@ + + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -48,9 +50,9 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + am__installdirs = "$(DESTDIR)$(libexecdir)" "$(DESTDIR)$(serverdir)" \ + "$(DESTDIR)$(uidir)" +-libexecPROGRAMS_INSTALL = $(INSTALL_PROGRAM) + PROGRAMS = $(libexec_PROGRAMS) + am_gweather_applet_2_OBJECTS = main.$(OBJEXT) gweather-about.$(OBJEXT) \ + gweather-pref.$(OBJEXT) gweather-dialog.$(OBJEXT) \ +@@ -63,6 +65,7 @@ + DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles ++am__mv = mv -f + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) + LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +@@ -86,16 +89,57 @@ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +-serverDATA_INSTALL = $(INSTALL_DATA) +-uiDATA_INSTALL = $(INSTALL_DATA) ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' + DATA = $(server_DATA) $(ui_DATA) + RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive ++AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ ++ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ ++ distdir + ETAGS = etags + CTAGS = ctags + DIST_SUBDIRS = $(SUBDIRS) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++am__relativize = \ ++ dir0=`pwd`; \ ++ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ ++ sed_rest='s,^[^/]*/*,,'; \ ++ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ ++ sed_butlast='s,/*[^/]*$$,,'; \ ++ while test -n "$$dir1"; do \ ++ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ ++ if test "$$first" != "."; then \ ++ if test "$$first" = ".."; then \ ++ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ ++ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ ++ else \ ++ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ ++ if test "$$first2" = "$$first"; then \ ++ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ ++ else \ ++ dir2="../$$dir2"; \ ++ fi; \ ++ dir0="$$dir0"/"$$first"; \ ++ fi; \ ++ fi; \ ++ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ ++ done; \ ++ reldir="$$dir2" + pkgdatadir = @pkgdatadir@ + ACLOCAL = @ACLOCAL@ + ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@ +@@ -224,6 +268,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -372,9 +417,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu gweather/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu gweather/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu gweather/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu gweather/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -392,34 +437,50 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + install-libexecPROGRAMS: $(libexec_PROGRAMS) + @$(NORMAL_INSTALL) + test -z "$(libexecdir)" || $(MKDIR_P) "$(DESTDIR)$(libexecdir)" +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- if test -f $$p \ +- || test -f $$p1 \ +- ; then \ +- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(libexecdir)/$$f'"; \ +- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(libexecdir)/$$f" || exit 1; \ +- else :; fi; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed 's/$(EXEEXT)$$//' | \ ++ while read p p1; do if test -f $$p || test -f $$p1; \ ++ then echo "$$p"; echo "$$p"; else :; fi; \ ++ done | \ ++ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ ++ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ ++ sed 'N;N;N;s,\n, ,g' | \ ++ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ ++ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ ++ if ($$2 == $$4) files[d] = files[d] " " $$1; \ ++ else { print "f", $$3 "/" $$4, $$1; } } \ ++ END { for (d in files) print "f", d, files[d] }' | \ ++ while read type dir files; do \ ++ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ ++ test -z "$$files" || { \ ++ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(libexecdir)$$dir'"; \ ++ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(libexecdir)$$dir" || exit $$?; \ ++ } \ ++ ; done + + uninstall-libexecPROGRAMS: + @$(NORMAL_UNINSTALL) +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " rm -f '$(DESTDIR)$(libexecdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(libexecdir)/$$f"; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ ++ files=`for p in $$list; do echo "$$p"; done | \ ++ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ ++ -e 's/$$/$(EXEEXT)/' `; \ ++ test -n "$$list" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(libexecdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(libexecdir)" && rm -f $$files + + clean-libexecPROGRAMS: +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- echo " rm -f $$p $$f"; \ +- rm -f $$p $$f ; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$$list" || exit 0; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list || exit $$?; \ ++ test -n "$(EXEEXT)" || exit 0; \ ++ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list + gweather-applet-2$(EXEEXT): $(gweather_applet_2_OBJECTS) $(gweather_applet_2_DEPENDENCIES) + @rm -f gweather-applet-2$(EXEEXT) + $(LINK) $(gweather_applet_2_OBJECTS) $(gweather_applet_2_LDADD) $(LIBS) +@@ -438,21 +499,21 @@ + + .c.o: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c $< + + .c.obj: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: + @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< +@@ -465,37 +526,43 @@ + install-serverDATA: $(server_DATA) + @$(NORMAL_INSTALL) + test -z "$(serverdir)" || $(MKDIR_P) "$(DESTDIR)$(serverdir)" +- @list='$(server_DATA)'; for p in $$list; do \ ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(serverDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(serverdir)/$$f'"; \ +- $(serverDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(serverdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(serverdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(serverdir)" || exit $$?; \ + done + + uninstall-serverDATA: + @$(NORMAL_UNINSTALL) +- @list='$(server_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(serverdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(serverdir)/$$f"; \ +- done ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(serverdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(serverdir)" && rm -f $$files + install-uiDATA: $(ui_DATA) + @$(NORMAL_INSTALL) + test -z "$(uidir)" || $(MKDIR_P) "$(DESTDIR)$(uidir)" +- @list='$(ui_DATA)'; for p in $$list; do \ ++ @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(uiDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(uidir)/$$f'"; \ +- $(uiDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(uidir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(uidir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(uidir)" || exit $$?; \ + done + + uninstall-uiDATA: + @$(NORMAL_UNINSTALL) +- @list='$(ui_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(uidir)/$$f'"; \ +- rm -f "$(DESTDIR)$(uidir)/$$f"; \ +- done ++ @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(uidir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(uidir)" && rm -f $$files + + # This directory's subdirectories are mostly independent; you can cd + # into them and run `make' without going through this Makefile. +@@ -521,7 +588,7 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ +@@ -555,16 +622,16 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" + tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) +@@ -579,7 +646,7 @@ + + TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ ++ set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ +@@ -591,7 +658,7 @@ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ +- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ ++ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ +@@ -600,29 +667,34 @@ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ shift; \ ++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique; \ ++ if test $$# -gt 0; then \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ "$$@" $$unique; \ ++ else \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$unique; \ ++ fi; \ + fi + ctags: CTAGS + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$tags $$unique ++ $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && cd $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) $$here ++ && $(am__cd) $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) "$$here" + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +@@ -643,29 +715,44 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ +- distdir=`$(am__cd) $(distdir) && pwd`; \ +- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ +- (cd $$subdir && \ ++ fi; \ ++ done ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ if test "$$subdir" = .; then :; else \ ++ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ ++ $(am__relativize); \ ++ new_distdir=$$reldir; \ ++ dir1=$$subdir; dir2="$(top_distdir)"; \ ++ $(am__relativize); \ ++ new_top_distdir=$$reldir; \ ++ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ ++ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ++ ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ +- top_distdir="$$top_distdir" \ +- distdir="$$distdir/$$subdir" \ ++ top_distdir="$$new_top_distdir" \ ++ distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ ++ am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ +@@ -699,6 +786,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -720,6 +808,8 @@ + + html: html-recursive + ++html-am: ++ + info: info-recursive + + info-am: +@@ -728,18 +818,28 @@ + + install-dvi: install-dvi-recursive + ++install-dvi-am: ++ + install-exec-am: install-libexecPROGRAMS + + install-html: install-html-recursive + ++install-html-am: ++ + install-info: install-info-recursive + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-recursive + ++install-pdf-am: ++ + install-ps: install-ps-recursive + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -763,8 +863,8 @@ + uninstall-am: uninstall-libexecPROGRAMS uninstall-serverDATA \ + uninstall-uiDATA + +-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ +- install-strip ++.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ ++ install-am install-strip tags-recursive + + .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic \ +@@ -791,6 +891,7 @@ + @INTLTOOL_SERVER_RULE@ + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/invest-applet/data/art/Makefile.in gnome-applets-2.28.0.ubuntu/invest-applet/data/art/Makefile.in +--- gnome-applets-2.28.0/invest-applet/data/art/Makefile.in 2009-09-21 08:19:33.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/invest-applet/data/art/Makefile.in 2009-09-21 12:06:44.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -15,8 +16,9 @@ + @SET_MAKE@ + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -46,6 +48,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +@@ -53,9 +56,23 @@ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' + am__installdirs = "$(DESTDIR)$(artdir)" +-artDATA_INSTALL = $(INSTALL_DATA) + DATA = $(art_DATA) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + pkgdatadir = @pkgdatadir@ +@@ -186,6 +203,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -313,9 +331,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu invest-applet/data/art/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu invest-applet/data/art/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu invest-applet/data/art/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu invest-applet/data/art/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -333,6 +351,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + mostlyclean-libtool: + -rm -f *.lo +@@ -342,20 +361,23 @@ + install-artDATA: $(art_DATA) + @$(NORMAL_INSTALL) + test -z "$(artdir)" || $(MKDIR_P) "$(DESTDIR)$(artdir)" +- @list='$(art_DATA)'; for p in $$list; do \ ++ @list='$(art_DATA)'; test -n "$(artdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(artDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(artdir)/$$f'"; \ +- $(artDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(artdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(artdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(artdir)" || exit $$?; \ + done + + uninstall-artDATA: + @$(NORMAL_UNINSTALL) +- @list='$(art_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(artdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(artdir)/$$f"; \ +- done ++ @list='$(art_DATA)'; test -n "$(artdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(artdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(artdir)" && rm -f $$files + tags: TAGS + TAGS: + +@@ -379,13 +401,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -416,6 +442,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -434,6 +461,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -442,18 +471,28 @@ + + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -532,6 +571,7 @@ + fi + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/invest-applet/data/Makefile.in gnome-applets-2.28.0.ubuntu/invest-applet/data/Makefile.in +--- gnome-applets-2.28.0/invest-applet/data/Makefile.in 2009-09-21 08:19:33.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/invest-applet/data/Makefile.in 2009-09-21 12:06:44.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -15,8 +16,9 @@ + @SET_MAKE@ + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -46,6 +48,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ +@@ -60,19 +63,59 @@ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' + am__installdirs = "$(DESTDIR)$(builderdir)" "$(DESTDIR)$(serverdir)" \ + "$(DESTDIR)$(uidir)" +-builderDATA_INSTALL = $(INSTALL_DATA) +-serverDATA_INSTALL = $(INSTALL_DATA) +-uiDATA_INSTALL = $(INSTALL_DATA) + DATA = $(builder_DATA) $(server_DATA) $(ui_DATA) + RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive ++AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ ++ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ ++ distdir + ETAGS = etags + CTAGS = ctags + DIST_SUBDIRS = $(SUBDIRS) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++am__relativize = \ ++ dir0=`pwd`; \ ++ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ ++ sed_rest='s,^[^/]*/*,,'; \ ++ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ ++ sed_butlast='s,/*[^/]*$$,,'; \ ++ while test -n "$$dir1"; do \ ++ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ ++ if test "$$first" != "."; then \ ++ if test "$$first" = ".."; then \ ++ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ ++ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ ++ else \ ++ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ ++ if test "$$first2" = "$$first"; then \ ++ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ ++ else \ ++ dir2="../$$dir2"; \ ++ fi; \ ++ dir0="$$dir0"/"$$first"; \ ++ fi; \ ++ fi; \ ++ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ ++ done; \ ++ reldir="$$dir2" + pkgdatadir = @pkgdatadir@ + ACLOCAL = @ACLOCAL@ + ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@ +@@ -201,6 +244,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -362,9 +406,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu invest-applet/data/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu invest-applet/data/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu invest-applet/data/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu invest-applet/data/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -382,6 +426,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + mostlyclean-libtool: + -rm -f *.lo +@@ -391,54 +436,63 @@ + install-builderDATA: $(builder_DATA) + @$(NORMAL_INSTALL) + test -z "$(builderdir)" || $(MKDIR_P) "$(DESTDIR)$(builderdir)" +- @list='$(builder_DATA)'; for p in $$list; do \ ++ @list='$(builder_DATA)'; test -n "$(builderdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(builderDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(builderdir)/$$f'"; \ +- $(builderDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(builderdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(builderdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(builderdir)" || exit $$?; \ + done + + uninstall-builderDATA: + @$(NORMAL_UNINSTALL) +- @list='$(builder_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(builderdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(builderdir)/$$f"; \ +- done ++ @list='$(builder_DATA)'; test -n "$(builderdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(builderdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(builderdir)" && rm -f $$files + install-serverDATA: $(server_DATA) + @$(NORMAL_INSTALL) + test -z "$(serverdir)" || $(MKDIR_P) "$(DESTDIR)$(serverdir)" +- @list='$(server_DATA)'; for p in $$list; do \ ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(serverDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(serverdir)/$$f'"; \ +- $(serverDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(serverdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(serverdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(serverdir)" || exit $$?; \ + done + + uninstall-serverDATA: + @$(NORMAL_UNINSTALL) +- @list='$(server_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(serverdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(serverdir)/$$f"; \ +- done ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(serverdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(serverdir)" && rm -f $$files + install-uiDATA: $(ui_DATA) + @$(NORMAL_INSTALL) + test -z "$(uidir)" || $(MKDIR_P) "$(DESTDIR)$(uidir)" +- @list='$(ui_DATA)'; for p in $$list; do \ ++ @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(uiDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(uidir)/$$f'"; \ +- $(uiDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(uidir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(uidir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(uidir)" || exit $$?; \ + done + + uninstall-uiDATA: + @$(NORMAL_UNINSTALL) +- @list='$(ui_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(uidir)/$$f'"; \ +- rm -f "$(DESTDIR)$(uidir)/$$f"; \ +- done ++ @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(uidir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(uidir)" && rm -f $$files + + # This directory's subdirectories are mostly independent; you can cd + # into them and run `make' without going through this Makefile. +@@ -464,7 +518,7 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ +@@ -498,16 +552,16 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" + tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) +@@ -522,7 +576,7 @@ + + TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ ++ set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ +@@ -534,7 +588,7 @@ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ +- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ ++ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ +@@ -543,29 +597,34 @@ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ shift; \ ++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique; \ ++ if test $$# -gt 0; then \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ "$$@" $$unique; \ ++ else \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$unique; \ ++ fi; \ + fi + ctags: CTAGS + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$tags $$unique ++ $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && cd $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) $$here ++ && $(am__cd) $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) "$$here" + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +@@ -586,29 +645,44 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ +- distdir=`$(am__cd) $(distdir) && pwd`; \ +- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ +- (cd $$subdir && \ ++ fi; \ ++ done ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ if test "$$subdir" = .; then :; else \ ++ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ ++ $(am__relativize); \ ++ new_distdir=$$reldir; \ ++ dir1=$$subdir; dir2="$(top_distdir)"; \ ++ $(am__relativize); \ ++ new_top_distdir=$$reldir; \ ++ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ ++ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ++ ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ +- top_distdir="$$top_distdir" \ +- distdir="$$distdir/$$subdir" \ ++ top_distdir="$$new_top_distdir" \ ++ distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ ++ am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ +@@ -641,6 +715,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) + + maintainer-clean-generic: +@@ -660,6 +735,8 @@ + + html: html-recursive + ++html-am: ++ + info: info-recursive + + info-am: +@@ -668,18 +745,28 @@ + + install-dvi: install-dvi-recursive + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-recursive + ++install-html-am: ++ + install-info: install-info-recursive + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-recursive + ++install-pdf-am: ++ + install-ps: install-ps-recursive + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -701,8 +788,8 @@ + uninstall-am: uninstall-builderDATA uninstall-serverDATA \ + uninstall-uiDATA + +-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ +- install-strip ++.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ ++ install-am install-strip tags-recursive + + .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic clean-libtool \ +@@ -731,6 +818,7 @@ + sed -e "s|\@LIBEXECDIR\@|$(libexecdir)|" $< > $@ + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/invest-applet/docs/Makefile.in gnome-applets-2.28.0.ubuntu/invest-applet/docs/Makefile.in +--- gnome-applets-2.28.0/invest-applet/docs/Makefile.in 2009-09-21 08:19:33.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/invest-applet/docs/Makefile.in 2009-09-21 12:06:44.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -38,8 +39,9 @@ + + ################################################################################ + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -70,6 +72,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +@@ -201,6 +204,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -418,9 +422,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu invest-applet/docs/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu invest-applet/docs/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu invest-applet/docs/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu invest-applet/docs/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -438,6 +442,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + mostlyclean-libtool: + -rm -f *.lo +@@ -467,13 +472,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -504,6 +513,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -522,6 +532,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -530,18 +542,28 @@ + + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -952,6 +974,7 @@ + dist-hook: doc-dist-hook + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/invest-applet/invest/Makefile.in gnome-applets-2.28.0.ubuntu/invest-applet/invest/Makefile.in +--- gnome-applets-2.28.0/invest-applet/invest/Makefile.in 2009-09-21 08:19:33.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/invest-applet/invest/Makefile.in 2009-09-21 12:06:44.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -15,8 +16,9 @@ + @SET_MAKE@ + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -47,21 +49,33 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = defs.py +-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(libexecdir)" \ +- "$(DESTDIR)$(investdir)" "$(DESTDIR)$(investdir)" +-binSCRIPT_INSTALL = $(INSTALL_SCRIPT) +-libexecSCRIPT_INSTALL = $(INSTALL_SCRIPT) +-SCRIPTS = $(bin_SCRIPTS) $(libexec_SCRIPTS) +-SOURCES = +-DIST_SOURCES = ++CONFIG_CLEAN_VPATH_FILES = + am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; + am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +-investPYTHON_INSTALL = $(INSTALL_DATA) +-nodist_investPYTHON_INSTALL = $(INSTALL_DATA) ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' ++am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(libexecdir)" \ ++ "$(DESTDIR)$(investdir)" "$(DESTDIR)$(investdir)" ++SCRIPTS = $(bin_SCRIPTS) $(libexec_SCRIPTS) ++SOURCES = ++DIST_SOURCES = + py_compile = $(top_srcdir)/py-compile + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + pkgdatadir = @pkgdatadir@ +@@ -192,6 +206,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -336,9 +351,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu invest-applet/invest/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu invest-applet/invest/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu invest-applet/invest/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu invest-applet/invest/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -356,46 +371,77 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + defs.py: $(top_builddir)/config.status $(srcdir)/defs.py.in + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ + install-binSCRIPTS: $(bin_SCRIPTS) + @$(NORMAL_INSTALL) + test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" +- @list='$(bin_SCRIPTS)'; for p in $$list; do \ ++ @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- if test -f $$d$$p; then \ +- f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \ +- echo " $(binSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(bindir)/$$f'"; \ +- $(binSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(bindir)/$$f"; \ +- else :; fi; \ +- done ++ if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ ++ done | \ ++ sed -e 'p;s,.*/,,;n' \ ++ -e 'h;s|.*|.|' \ ++ -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ ++ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ ++ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ ++ if ($$2 == $$4) { files[d] = files[d] " " $$1; \ ++ if (++n[d] == $(am__install_max)) { \ ++ print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ ++ else { print "f", d "/" $$4, $$1 } } \ ++ END { for (d in files) print "f", d, files[d] }' | \ ++ while read type dir files; do \ ++ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ ++ test -z "$$files" || { \ ++ echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \ ++ $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ ++ } \ ++ ; done + + uninstall-binSCRIPTS: + @$(NORMAL_UNINSTALL) +- @list='$(bin_SCRIPTS)'; for p in $$list; do \ +- f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \ +- echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ +- rm -f "$(DESTDIR)$(bindir)/$$f"; \ +- done ++ @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \ ++ files=`for p in $$list; do echo "$$p"; done | \ ++ sed -e 's,.*/,,;$(transform)'`; \ ++ test -n "$$list" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(bindir)" && rm -f $$files + install-libexecSCRIPTS: $(libexec_SCRIPTS) + @$(NORMAL_INSTALL) + test -z "$(libexecdir)" || $(MKDIR_P) "$(DESTDIR)$(libexecdir)" +- @list='$(libexec_SCRIPTS)'; for p in $$list; do \ ++ @list='$(libexec_SCRIPTS)'; test -n "$(libexecdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- if test -f $$d$$p; then \ +- f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \ +- echo " $(libexecSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(libexecdir)/$$f'"; \ +- $(libexecSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(libexecdir)/$$f"; \ +- else :; fi; \ +- done ++ if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ ++ done | \ ++ sed -e 'p;s,.*/,,;n' \ ++ -e 'h;s|.*|.|' \ ++ -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ ++ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ ++ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ ++ if ($$2 == $$4) { files[d] = files[d] " " $$1; \ ++ if (++n[d] == $(am__install_max)) { \ ++ print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ ++ else { print "f", d "/" $$4, $$1 } } \ ++ END { for (d in files) print "f", d, files[d] }' | \ ++ while read type dir files; do \ ++ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ ++ test -z "$$files" || { \ ++ echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(libexecdir)$$dir'"; \ ++ $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(libexecdir)$$dir" || exit $$?; \ ++ } \ ++ ; done + + uninstall-libexecSCRIPTS: + @$(NORMAL_UNINSTALL) +- @list='$(libexec_SCRIPTS)'; for p in $$list; do \ +- f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \ +- echo " rm -f '$(DESTDIR)$(libexecdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(libexecdir)/$$f"; \ +- done ++ @list='$(libexec_SCRIPTS)'; test -n "$(libexecdir)" || exit 0; \ ++ files=`for p in $$list; do echo "$$p"; done | \ ++ sed -e 's,.*/,,;$(transform)'`; \ ++ test -n "$$list" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(libexecdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(libexecdir)" && rm -f $$files + + mostlyclean-libtool: + -rm -f *.lo +@@ -405,15 +451,20 @@ + install-investPYTHON: $(invest_PYTHON) + @$(NORMAL_INSTALL) + test -z "$(investdir)" || $(MKDIR_P) "$(DESTDIR)$(investdir)" +- @list='$(invest_PYTHON)'; dlist=''; for p in $$list; do\ ++ @list='$(invest_PYTHON)'; dlist=; list2=; test -n "$(investdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \ + if test -f $$b$$p; then \ +- f=$(am__strip_dir) \ ++ $(am__strip_dir) \ + dlist="$$dlist $$f"; \ +- echo " $(investPYTHON_INSTALL) '$$b$$p' '$(DESTDIR)$(investdir)/$$f'"; \ +- $(investPYTHON_INSTALL) "$$b$$p" "$(DESTDIR)$(investdir)/$$f"; \ ++ list2="$$list2 $$b$$p"; \ + else :; fi; \ + done; \ ++ for file in $$list2; do echo $$file; done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(investdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(investdir)" || exit $$?; \ ++ done || exit $$?; \ + if test -n "$$dlist"; then \ + if test -z "$(DESTDIR)"; then \ + PYTHON=$(PYTHON) $(py_compile) --basedir "$(investdir)" $$dlist; \ +@@ -424,24 +475,34 @@ + + uninstall-investPYTHON: + @$(NORMAL_UNINSTALL) +- @list='$(invest_PYTHON)'; dlist=''; for p in $$list; do\ +- f=$(am__strip_dir) \ +- rm -f "$(DESTDIR)$(investdir)/$$f"; \ +- rm -f "$(DESTDIR)$(investdir)/$${f}c"; \ +- rm -f "$(DESTDIR)$(investdir)/$${f}o"; \ +- done ++ @list='$(invest_PYTHON)'; test -n "$(investdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ filesc=`echo "$$files" | sed 's|$$|c|'`; \ ++ fileso=`echo "$$files" | sed 's|$$|o|'`; \ ++ echo " ( cd '$(DESTDIR)$(investdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(investdir)" && rm -f $$files || exit $$?; \ ++ echo " ( cd '$(DESTDIR)$(investdir)' && rm -f" $$filesc ")"; \ ++ cd "$(DESTDIR)$(investdir)" && rm -f $$filesc || exit $$?; \ ++ echo " ( cd '$(DESTDIR)$(investdir)' && rm -f" $$fileso ")"; \ ++ cd "$(DESTDIR)$(investdir)" && rm -f $$fileso + install-nodist_investPYTHON: $(nodist_invest_PYTHON) + @$(NORMAL_INSTALL) + test -z "$(investdir)" || $(MKDIR_P) "$(DESTDIR)$(investdir)" +- @list='$(nodist_invest_PYTHON)'; dlist=''; for p in $$list; do\ ++ @list='$(nodist_invest_PYTHON)'; dlist=; list2=; test -n "$(investdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \ + if test -f $$b$$p; then \ +- f=$(am__strip_dir) \ ++ $(am__strip_dir) \ + dlist="$$dlist $$f"; \ +- echo " $(nodist_investPYTHON_INSTALL) '$$b$$p' '$(DESTDIR)$(investdir)/$$f'"; \ +- $(nodist_investPYTHON_INSTALL) "$$b$$p" "$(DESTDIR)$(investdir)/$$f"; \ ++ list2="$$list2 $$b$$p"; \ + else :; fi; \ + done; \ ++ for file in $$list2; do echo $$file; done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(investdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(investdir)" || exit $$?; \ ++ done || exit $$?; \ + if test -n "$$dlist"; then \ + if test -z "$(DESTDIR)"; then \ + PYTHON=$(PYTHON) $(py_compile) --basedir "$(investdir)" $$dlist; \ +@@ -452,12 +513,17 @@ + + uninstall-nodist_investPYTHON: + @$(NORMAL_UNINSTALL) +- @list='$(nodist_invest_PYTHON)'; dlist=''; for p in $$list; do\ +- f=$(am__strip_dir) \ +- rm -f "$(DESTDIR)$(investdir)/$$f"; \ +- rm -f "$(DESTDIR)$(investdir)/$${f}c"; \ +- rm -f "$(DESTDIR)$(investdir)/$${f}o"; \ +- done ++ @list='$(nodist_invest_PYTHON)'; test -n "$(investdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ filesc=`echo "$$files" | sed 's|$$|c|'`; \ ++ fileso=`echo "$$files" | sed 's|$$|o|'`; \ ++ echo " ( cd '$(DESTDIR)$(investdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(investdir)" && rm -f $$files || exit $$?; \ ++ echo " ( cd '$(DESTDIR)$(investdir)' && rm -f" $$filesc ")"; \ ++ cd "$(DESTDIR)$(investdir)" && rm -f $$filesc || exit $$?; \ ++ echo " ( cd '$(DESTDIR)$(investdir)' && rm -f" $$fileso ")"; \ ++ cd "$(DESTDIR)$(investdir)" && rm -f $$fileso + tags: TAGS + TAGS: + +@@ -481,13 +547,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -521,6 +591,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) + + maintainer-clean-generic: +@@ -541,6 +612,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -549,18 +622,28 @@ + + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: install-binSCRIPTS install-libexecSCRIPTS + + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -582,7 +665,7 @@ + uninstall-am: uninstall-binSCRIPTS uninstall-investPYTHON \ + uninstall-libexecSCRIPTS uninstall-nodist_investPYTHON + +-.MAKE: install-am install-strip ++.MAKE: all check install install-am install-strip + + .PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ +@@ -605,6 +688,7 @@ + #TESTS = test.py + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/invest-applet/Makefile.in gnome-applets-2.28.0.ubuntu/invest-applet/Makefile.in +--- gnome-applets-2.28.0/invest-applet/Makefile.in 2009-09-21 08:19:33.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/invest-applet/Makefile.in 2009-09-21 12:06:44.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,8 +15,9 @@ + + @SET_MAKE@ + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -45,6 +47,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ +@@ -56,10 +59,38 @@ + ps-recursive uninstall-recursive + RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive ++AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ ++ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ ++ distdir + ETAGS = etags + CTAGS = ctags + DIST_SUBDIRS = $(SUBDIRS) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++am__relativize = \ ++ dir0=`pwd`; \ ++ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ ++ sed_rest='s,^[^/]*/*,,'; \ ++ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ ++ sed_butlast='s,/*[^/]*$$,,'; \ ++ while test -n "$$dir1"; do \ ++ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ ++ if test "$$first" != "."; then \ ++ if test "$$first" = ".."; then \ ++ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ ++ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ ++ else \ ++ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ ++ if test "$$first2" = "$$first"; then \ ++ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ ++ else \ ++ dir2="../$$dir2"; \ ++ fi; \ ++ dir0="$$dir0"/"$$first"; \ ++ fi; \ ++ fi; \ ++ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ ++ done; \ ++ reldir="$$dir2" + pkgdatadir = @pkgdatadir@ + ACLOCAL = @ACLOCAL@ + ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@ +@@ -188,6 +219,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -301,9 +333,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu invest-applet/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu invest-applet/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu invest-applet/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu invest-applet/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -321,6 +353,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + mostlyclean-libtool: + -rm -f *.lo +@@ -352,7 +385,7 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ +@@ -386,16 +419,16 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" + tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) +@@ -410,7 +443,7 @@ + + TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ ++ set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ +@@ -422,7 +455,7 @@ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ +- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ ++ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ +@@ -431,29 +464,34 @@ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ shift; \ ++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique; \ ++ if test $$# -gt 0; then \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ "$$@" $$unique; \ ++ else \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$unique; \ ++ fi; \ + fi + ctags: CTAGS + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$tags $$unique ++ $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && cd $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) $$here ++ && $(am__cd) $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) "$$here" + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +@@ -474,29 +512,44 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ +- distdir=`$(am__cd) $(distdir) && pwd`; \ +- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ +- (cd $$subdir && \ ++ fi; \ ++ done ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ if test "$$subdir" = .; then :; else \ ++ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ ++ $(am__relativize); \ ++ new_distdir=$$reldir; \ ++ dir1=$$subdir; dir2="$(top_distdir)"; \ ++ $(am__relativize); \ ++ new_top_distdir=$$reldir; \ ++ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ ++ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ++ ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ +- top_distdir="$$top_distdir" \ +- distdir="$$distdir/$$subdir" \ ++ top_distdir="$$new_top_distdir" \ ++ distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ ++ am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ +@@ -526,6 +579,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -544,6 +598,8 @@ + + html: html-recursive + ++html-am: ++ + info: info-recursive + + info-am: +@@ -552,18 +608,28 @@ + + install-dvi: install-dvi-recursive + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-recursive + ++install-html-am: ++ + install-info: install-info-recursive + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-recursive + ++install-pdf-am: ++ + install-ps: install-ps-recursive + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -584,8 +650,8 @@ + + uninstall-am: + +-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ +- install-strip ++.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ ++ install-am install-strip tags-recursive + + .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic clean-libtool \ +@@ -603,6 +669,7 @@ + + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/Makefile.in gnome-applets-2.28.0.ubuntu/Makefile.in +--- gnome-applets-2.28.0/Makefile.in 2009-09-21 08:19:35.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/Makefile.in 2009-09-21 12:06:46.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,8 +15,9 @@ + + @SET_MAKE@ + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -51,6 +53,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = config.h + CONFIG_CLEAN_FILES = gnome-applets.spec ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ +@@ -62,15 +65,43 @@ + ps-recursive uninstall-recursive + RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive ++AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ ++ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ ++ distdir dist dist-all distcheck + ETAGS = etags + CTAGS = ctags + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + distdir = $(PACKAGE)-$(VERSION) + top_distdir = $(distdir) + am__remove_distdir = \ +- { test ! -d $(distdir) \ +- || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ +- && rm -fr $(distdir); }; } ++ { test ! -d "$(distdir)" \ ++ || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ ++ && rm -fr "$(distdir)"; }; } ++am__relativize = \ ++ dir0=`pwd`; \ ++ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ ++ sed_rest='s,^[^/]*/*,,'; \ ++ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ ++ sed_butlast='s,/*[^/]*$$,,'; \ ++ while test -n "$$dir1"; do \ ++ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ ++ if test "$$first" != "."; then \ ++ if test "$$first" = ".."; then \ ++ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ ++ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ ++ else \ ++ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ ++ if test "$$first2" = "$$first"; then \ ++ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ ++ else \ ++ dir2="../$$dir2"; \ ++ fi; \ ++ dir0="$$dir0"/"$$first"; \ ++ fi; \ ++ fi; \ ++ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ ++ done; \ ++ reldir="$$dir2" + DIST_ARCHIVES = $(distdir).tar.gz + GZIP_ENV = --best + distcleancheck_listfiles = find . -type f -print +@@ -206,6 +237,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -322,11 +354,11 @@ + @BUILD_CPUFREQ_APPLET_TRUE@cpufreq_SUBDIR = cpufreq + @BUILD_INVEST_APPLET_TRUE@invest_applet_SUBDIR = invest-applet + @BUILD_MIXER_APPLET_TRUE@mixer_applet_SUBDIR = mixer ++@BUILD_MINICOMMANDER_APPLET_TRUE@minicommander_applet_SUBDIR = mini-commander + always_built_SUBDIRS = \ + charpick \ + drivemount \ + geyes \ +- mini-commander \ + gkb-new \ + stickynotes \ + trashapplet \ +@@ -344,7 +376,8 @@ + $(keyboard_applet_SUBDIRS) \ + $(invest_applet_SUBDIR) \ + $(cpufreq_SUBDIR) \ +- $(mixer_applet_SUBDIR) ++ $(mixer_applet_SUBDIR) \ ++ $(minicommander_applet_SUBDIR) + + DIST_SUBDIRS = \ + po \ +@@ -401,15 +434,15 @@ + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ +- echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ +- cd $(srcdir) && $(AUTOMAKE) --gnu \ ++ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ ++ $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -425,9 +458,10 @@ + $(SHELL) ./config.status --recheck + + $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) +- cd $(srcdir) && $(AUTOCONF) ++ $(am__cd) $(srcdir) && $(AUTOCONF) + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) +- cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) ++ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) ++$(am__aclocal_m4_deps): + + config.h: stamp-h1 + @if test ! -f $@; then \ +@@ -439,7 +473,7 @@ + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status config.h + $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) +- cd $(top_srcdir) && $(AUTOHEADER) ++ ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) + rm -f stamp-h1 + touch $@ + +@@ -481,7 +515,7 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ +@@ -515,16 +549,16 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" + tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) +@@ -539,7 +573,7 @@ + + TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ ++ set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ +@@ -551,7 +585,7 @@ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ +- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ ++ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ +@@ -560,36 +594,41 @@ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ shift; \ ++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique; \ ++ if test $$# -gt 0; then \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ "$$@" $$unique; \ ++ else \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$unique; \ ++ fi; \ + fi + ctags: CTAGS + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$tags $$unique ++ $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && cd $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) $$here ++ && $(am__cd) $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) "$$here" + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) + $(am__remove_distdir) +- test -d $(distdir) || mkdir $(distdir) ++ test -d "$(distdir)" || mkdir "$(distdir)" + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ +@@ -605,38 +644,54 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ +- distdir=`$(am__cd) $(distdir) && pwd`; \ +- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ +- (cd $$subdir && \ ++ fi; \ ++ done ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ if test "$$subdir" = .; then :; else \ ++ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ ++ $(am__relativize); \ ++ new_distdir=$$reldir; \ ++ dir1=$$subdir; dir2="$(top_distdir)"; \ ++ $(am__relativize); \ ++ new_top_distdir=$$reldir; \ ++ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ ++ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ++ ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ +- top_distdir="$$top_distdir" \ +- distdir="$$distdir/$$subdir" \ ++ top_distdir="$$new_top_distdir" \ ++ distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ ++ am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ + done +- -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ ++ -test -n "$(am__skip_mode_fix)" \ ++ || find "$(distdir)" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ +- || chmod -R a+r $(distdir) ++ || chmod -R a+r "$(distdir)" + dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) +@@ -649,6 +704,10 @@ + tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma + $(am__remove_distdir) + ++dist-xz: distdir ++ tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz ++ $(am__remove_distdir) ++ + dist-tarZ: distdir + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__remove_distdir) +@@ -677,6 +736,8 @@ + bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lzma*) \ + unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\ ++ *.tar.xz*) \ ++ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ +@@ -688,9 +749,11 @@ + mkdir $(distdir)/_build + mkdir $(distdir)/_inst + chmod a-w $(distdir) ++ test -d $(distdir)/_build || exit 0; \ + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ +- && cd $(distdir)/_build \ ++ && am__cwd=`pwd` \ ++ && $(am__cd) $(distdir)/_build \ + && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) \ +@@ -712,13 +775,15 @@ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ +- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck ++ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ ++ && cd "$$am__cwd" \ ++ || exit 1 + $(am__remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' + distuninstallcheck: +- @cd $(distuninstallcheck_dir) \ ++ @$(am__cd) '$(distuninstallcheck_dir)' \ + && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ +@@ -760,6 +825,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) + + maintainer-clean-generic: +@@ -781,6 +847,8 @@ + + html: html-recursive + ++html-am: ++ + info: info-recursive + + info-am: +@@ -789,18 +857,28 @@ + + install-dvi: install-dvi-recursive + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-recursive + ++install-html-am: ++ + install-info: install-info-recursive + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-recursive + ++install-pdf-am: ++ + install-ps: install-ps-recursive + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -823,24 +901,24 @@ + + uninstall-am: + +-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ +- install-strip ++.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \ ++ ctags-recursive install-am install-strip tags-recursive + + .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am am--refresh check check-am clean clean-generic \ + clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \ +- dist-gzip dist-lzma dist-shar dist-tarZ dist-zip distcheck \ +- distclean distclean-generic distclean-hdr distclean-libtool \ +- distclean-tags distcleancheck distdir distuninstallcheck dvi \ +- dvi-am html html-am info info-am install install-am \ +- install-data install-data-am install-dvi install-dvi-am \ +- install-exec install-exec-am install-html install-html-am \ +- install-info install-info-am install-man install-pdf \ +- install-pdf-am install-ps install-ps-am install-strip \ +- installcheck installcheck-am installdirs installdirs-am \ +- maintainer-clean maintainer-clean-generic mostlyclean \ +- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ +- tags tags-recursive uninstall uninstall-am ++ dist-gzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \ ++ distcheck distclean distclean-generic distclean-hdr \ ++ distclean-libtool distclean-tags distcleancheck distdir \ ++ distuninstallcheck dvi dvi-am html html-am info info-am \ ++ install install-am install-data install-data-am install-dvi \ ++ install-dvi-am install-exec install-exec-am install-html \ ++ install-html-am install-info install-info-am install-man \ ++ install-pdf install-pdf-am install-ps install-ps-am \ ++ install-strip installcheck installcheck-am installdirs \ ++ installdirs-am maintainer-clean maintainer-clean-generic \ ++ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ ++ ps ps-am tags tags-recursive uninstall uninstall-am + + + # We build the ChangeLog from the git log +@@ -855,6 +933,7 @@ + .PHONY: ChangeLog + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/man/Makefile.in gnome-applets-2.28.0.ubuntu/man/Makefile.in +--- gnome-applets-2.28.0/man/Makefile.in 2009-09-21 08:19:33.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/man/Makefile.in 2009-09-21 12:06:44.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,8 +15,9 @@ + + @SET_MAKE@ + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -45,8 +47,30 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = ++am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; ++am__vpath_adj = case $$p in \ ++ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ ++ *) f=$$p;; \ ++ esac; ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' + man1dir = $(mandir)/man1 + am__installdirs = "$(DESTDIR)$(man1dir)" + NROFF = nroff +@@ -180,6 +204,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -309,9 +334,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu man/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu man/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu man/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu man/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -329,57 +354,51 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + mostlyclean-libtool: + -rm -f *.lo + + clean-libtool: + -rm -rf .libs _libs +-install-man1: $(man1_MANS) $(man_MANS) ++install-man1: $(man_MANS) + @$(NORMAL_INSTALL) + test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)" +- @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ +- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ +- for i in $$l2; do \ +- case "$$i" in \ +- *.1*) list="$$list $$i" ;; \ +- esac; \ ++ @list=''; test -n "$(man1dir)" || exit 0; \ ++ { for i in $$list; do echo "$$i"; done; \ ++ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ ++ sed -n '/\.1[a-z]*$$/p'; \ ++ } | while read p; do \ ++ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ ++ echo "$$d$$p"; echo "$$p"; \ ++ done | \ ++ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ ++ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ ++ sed 'N;N;s,\n, ,g' | { \ ++ list=; while read file base inst; do \ ++ if test "$$base" = "$$inst"; then list="$$list $$file"; else \ ++ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ ++ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ ++ fi; \ + done; \ +- for i in $$list; do \ +- if test -f $$i; then file=$$i; \ +- else file=$(srcdir)/$$i; fi; \ +- ext=`echo $$i | sed -e 's/^.*\\.//'`; \ +- case "$$ext" in \ +- 1*) ;; \ +- *) ext='1' ;; \ +- esac; \ +- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ +- inst=`echo $$inst | sed -e 's/^.*\///'`; \ +- inst=`echo $$inst | sed '$(transform)'`.$$ext; \ +- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ +- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \ +- done ++ for i in $$list; do echo "$$i"; done | $(am__base_list) | \ ++ while read files; do \ ++ test -z "$$files" || { \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ ++ done; } ++ + uninstall-man1: + @$(NORMAL_UNINSTALL) +- @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ +- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ +- for i in $$l2; do \ +- case "$$i" in \ +- *.1*) list="$$list $$i" ;; \ +- esac; \ +- done; \ +- for i in $$list; do \ +- ext=`echo $$i | sed -e 's/^.*\\.//'`; \ +- case "$$ext" in \ +- 1*) ;; \ +- *) ext='1' ;; \ +- esac; \ +- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ +- inst=`echo $$inst | sed -e 's/^.*\///'`; \ +- inst=`echo $$inst | sed '$(transform)'`.$$ext; \ +- echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \ +- rm -f "$(DESTDIR)$(man1dir)/$$inst"; \ +- done ++ @list=''; test -n "$(man1dir)" || exit 0; \ ++ files=`{ for i in $$list; do echo "$$i"; done; \ ++ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ ++ sed -n '/\.1[a-z]*$$/p'; \ ++ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ ++ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ ++ test -z "$$files" || { \ ++ echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(man1dir)" && rm -f $$files; } + tags: TAGS + TAGS: + +@@ -388,6 +407,19 @@ + + + distdir: $(DISTFILES) ++ @list='$(MANS)'; if test -n "$$list"; then \ ++ list=`for p in $$list; do \ ++ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ ++ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ ++ if test -n "$$list" && \ ++ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ ++ echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \ ++ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ ++ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ ++ echo " typically \`make maintainer-clean' will remove them" >&2; \ ++ exit 1; \ ++ else :; fi; \ ++ else :; fi + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ +@@ -403,13 +435,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -440,6 +476,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -458,6 +495,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -466,18 +505,28 @@ + + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: install-man1 + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -516,6 +565,7 @@ + + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/mini-commander/help/Makefile.in gnome-applets-2.28.0.ubuntu/mini-commander/help/Makefile.in +--- gnome-applets-2.28.0/mini-commander/help/Makefile.in 2009-09-21 08:19:34.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/mini-commander/help/Makefile.in 2009-09-21 12:06:44.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -38,8 +39,9 @@ + + ################################################################################ + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -70,6 +72,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +@@ -201,6 +204,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -421,9 +425,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu mini-commander/help/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu mini-commander/help/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu mini-commander/help/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu mini-commander/help/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -441,6 +445,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + mostlyclean-libtool: + -rm -f *.lo +@@ -470,13 +475,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -507,6 +516,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -525,6 +535,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -533,18 +545,28 @@ + + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -955,6 +977,7 @@ + dist-hook: doc-dist-hook + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/mini-commander/Makefile.in gnome-applets-2.28.0.ubuntu/mini-commander/Makefile.in +--- gnome-applets-2.28.0/mini-commander/Makefile.in 2009-09-21 08:19:34.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/mini-commander/Makefile.in 2009-09-21 12:06:44.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -15,8 +16,9 @@ + @SET_MAKE@ + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -47,6 +49,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ +@@ -61,15 +64,57 @@ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' + am__installdirs = "$(DESTDIR)$(serverdir)" +-serverDATA_INSTALL = $(INSTALL_DATA) + DATA = $(server_DATA) + RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive ++AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ ++ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ ++ distdir + ETAGS = etags + CTAGS = ctags + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++am__relativize = \ ++ dir0=`pwd`; \ ++ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ ++ sed_rest='s,^[^/]*/*,,'; \ ++ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ ++ sed_butlast='s,/*[^/]*$$,,'; \ ++ while test -n "$$dir1"; do \ ++ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ ++ if test "$$first" != "."; then \ ++ if test "$$first" = ".."; then \ ++ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ ++ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ ++ else \ ++ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ ++ if test "$$first2" = "$$first"; then \ ++ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ ++ else \ ++ dir2="../$$dir2"; \ ++ fi; \ ++ dir0="$$dir0"/"$$first"; \ ++ fi; \ ++ fi; \ ++ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ ++ done; \ ++ reldir="$$dir2" + pkgdatadir = @pkgdatadir@ + ACLOCAL = @ACLOCAL@ + ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@ +@@ -198,6 +243,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -320,9 +366,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu mini-commander/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu mini-commander/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu mini-commander/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu mini-commander/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -340,6 +386,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + mostlyclean-libtool: + -rm -f *.lo +@@ -349,20 +396,23 @@ + install-serverDATA: $(server_DATA) + @$(NORMAL_INSTALL) + test -z "$(serverdir)" || $(MKDIR_P) "$(DESTDIR)$(serverdir)" +- @list='$(server_DATA)'; for p in $$list; do \ ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(serverDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(serverdir)/$$f'"; \ +- $(serverDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(serverdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(serverdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(serverdir)" || exit $$?; \ + done + + uninstall-serverDATA: + @$(NORMAL_UNINSTALL) +- @list='$(server_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(serverdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(serverdir)/$$f"; \ +- done ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(serverdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(serverdir)" && rm -f $$files + + # This directory's subdirectories are mostly independent; you can cd + # into them and run `make' without going through this Makefile. +@@ -388,7 +438,7 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ +@@ -422,16 +472,16 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" + tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) +@@ -446,7 +496,7 @@ + + TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ ++ set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ +@@ -458,7 +508,7 @@ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ +- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ ++ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ +@@ -467,29 +517,34 @@ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ shift; \ ++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique; \ ++ if test $$# -gt 0; then \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ "$$@" $$unique; \ ++ else \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$unique; \ ++ fi; \ + fi + ctags: CTAGS + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$tags $$unique ++ $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && cd $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) $$here ++ && $(am__cd) $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) "$$here" + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +@@ -510,29 +565,44 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ +- distdir=`$(am__cd) $(distdir) && pwd`; \ +- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ +- (cd $$subdir && \ ++ fi; \ ++ done ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ if test "$$subdir" = .; then :; else \ ++ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ ++ $(am__relativize); \ ++ new_distdir=$$reldir; \ ++ dir1=$$subdir; dir2="$(top_distdir)"; \ ++ $(am__relativize); \ ++ new_top_distdir=$$reldir; \ ++ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ ++ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ++ ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ +- top_distdir="$$top_distdir" \ +- distdir="$$distdir/$$subdir" \ ++ top_distdir="$$new_top_distdir" \ ++ distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ ++ am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ +@@ -566,6 +636,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -584,6 +655,8 @@ + + html: html-recursive + ++html-am: ++ + info: info-recursive + + info-am: +@@ -592,18 +665,28 @@ + + install-dvi: install-dvi-recursive + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-recursive + ++install-html-am: ++ + install-info: install-info-recursive + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-recursive + ++install-pdf-am: ++ + install-ps: install-ps-recursive + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -624,8 +707,8 @@ + + uninstall-am: uninstall-serverDATA + +-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ +- install-strip ++.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ ++ install-am install-strip tags-recursive + + .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic clean-libtool \ +@@ -646,6 +729,7 @@ + @BUILD_MINICOMMANDER_APPLET_FALSE@@INTLTOOL_SERVER_RULE@ + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/mini-commander/src/Makefile.in gnome-applets-2.28.0.ubuntu/mini-commander/src/Makefile.in +--- gnome-applets-2.28.0/mini-commander/src/Makefile.in 2009-09-21 08:19:34.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/mini-commander/src/Makefile.in 2009-09-21 12:06:44.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -16,8 +17,9 @@ + + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -49,12 +51,11 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + am__installdirs = "$(DESTDIR)$(libexecdir)" "$(DESTDIR)$(tooldir)" \ + "$(DESTDIR)$(builderdir)" "$(DESTDIR)$(desktop_iconsdir)" \ + "$(DESTDIR)$(schemasdir)" "$(DESTDIR)$(serverdir)" \ + "$(DESTDIR)$(uidir)" +-libexecPROGRAMS_INSTALL = $(INSTALL_PROGRAM) +-toolPROGRAMS_INSTALL = $(INSTALL_PROGRAM) + PROGRAMS = $(libexec_PROGRAMS) $(tool_PROGRAMS) + am_mc_install_default_macros_OBJECTS = \ + mc-install-default-macros.$(OBJEXT) +@@ -71,6 +72,7 @@ + DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles ++am__mv = mv -f + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) + LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +@@ -89,12 +91,22 @@ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +-builderDATA_INSTALL = $(INSTALL_DATA) +-desktop_iconsDATA_INSTALL = $(INSTALL_DATA) +-schemasDATA_INSTALL = $(INSTALL_DATA) +-serverDATA_INSTALL = $(INSTALL_DATA) +-uiDATA_INSTALL = $(INSTALL_DATA) ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' + DATA = $(builder_DATA) $(desktop_icons_DATA) $(schemas_DATA) \ + $(server_DATA) $(ui_DATA) + ETAGS = etags +@@ -228,6 +240,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -407,9 +420,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu mini-commander/src/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu mini-commander/src/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu mini-commander/src/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu mini-commander/src/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -427,62 +440,93 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + install-libexecPROGRAMS: $(libexec_PROGRAMS) + @$(NORMAL_INSTALL) + test -z "$(libexecdir)" || $(MKDIR_P) "$(DESTDIR)$(libexecdir)" +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- if test -f $$p \ +- || test -f $$p1 \ +- ; then \ +- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(libexecdir)/$$f'"; \ +- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(libexecdir)/$$f" || exit 1; \ +- else :; fi; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed 's/$(EXEEXT)$$//' | \ ++ while read p p1; do if test -f $$p || test -f $$p1; \ ++ then echo "$$p"; echo "$$p"; else :; fi; \ ++ done | \ ++ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ ++ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ ++ sed 'N;N;N;s,\n, ,g' | \ ++ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ ++ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ ++ if ($$2 == $$4) files[d] = files[d] " " $$1; \ ++ else { print "f", $$3 "/" $$4, $$1; } } \ ++ END { for (d in files) print "f", d, files[d] }' | \ ++ while read type dir files; do \ ++ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ ++ test -z "$$files" || { \ ++ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(libexecdir)$$dir'"; \ ++ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(libexecdir)$$dir" || exit $$?; \ ++ } \ ++ ; done + + uninstall-libexecPROGRAMS: + @$(NORMAL_UNINSTALL) +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " rm -f '$(DESTDIR)$(libexecdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(libexecdir)/$$f"; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ ++ files=`for p in $$list; do echo "$$p"; done | \ ++ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ ++ -e 's/$$/$(EXEEXT)/' `; \ ++ test -n "$$list" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(libexecdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(libexecdir)" && rm -f $$files + + clean-libexecPROGRAMS: +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- echo " rm -f $$p $$f"; \ +- rm -f $$p $$f ; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$$list" || exit 0; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list || exit $$?; \ ++ test -n "$(EXEEXT)" || exit 0; \ ++ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list + install-toolPROGRAMS: $(tool_PROGRAMS) + @$(NORMAL_INSTALL) + test -z "$(tooldir)" || $(MKDIR_P) "$(DESTDIR)$(tooldir)" +- @list='$(tool_PROGRAMS)'; for p in $$list; do \ +- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- if test -f $$p \ +- || test -f $$p1 \ +- ; then \ +- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(toolPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(tooldir)/$$f'"; \ +- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(toolPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(tooldir)/$$f" || exit 1; \ +- else :; fi; \ +- done ++ @list='$(tool_PROGRAMS)'; test -n "$(tooldir)" || list=; \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed 's/$(EXEEXT)$$//' | \ ++ while read p p1; do if test -f $$p || test -f $$p1; \ ++ then echo "$$p"; echo "$$p"; else :; fi; \ ++ done | \ ++ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ ++ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ ++ sed 'N;N;N;s,\n, ,g' | \ ++ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ ++ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ ++ if ($$2 == $$4) files[d] = files[d] " " $$1; \ ++ else { print "f", $$3 "/" $$4, $$1; } } \ ++ END { for (d in files) print "f", d, files[d] }' | \ ++ while read type dir files; do \ ++ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ ++ test -z "$$files" || { \ ++ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(tooldir)$$dir'"; \ ++ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(tooldir)$$dir" || exit $$?; \ ++ } \ ++ ; done + + uninstall-toolPROGRAMS: + @$(NORMAL_UNINSTALL) +- @list='$(tool_PROGRAMS)'; for p in $$list; do \ +- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " rm -f '$(DESTDIR)$(tooldir)/$$f'"; \ +- rm -f "$(DESTDIR)$(tooldir)/$$f"; \ +- done ++ @list='$(tool_PROGRAMS)'; test -n "$(tooldir)" || list=; \ ++ files=`for p in $$list; do echo "$$p"; done | \ ++ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ ++ -e 's/$$/$(EXEEXT)/' `; \ ++ test -n "$$list" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(tooldir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(tooldir)" && rm -f $$files + + clean-toolPROGRAMS: +- @list='$(tool_PROGRAMS)'; for p in $$list; do \ +- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- echo " rm -f $$p $$f"; \ +- rm -f $$p $$f ; \ +- done ++ @list='$(tool_PROGRAMS)'; test -n "$$list" || exit 0; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list || exit $$?; \ ++ test -n "$(EXEEXT)" || exit 0; \ ++ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list + mc-install-default-macros$(EXEEXT): $(mc_install_default_macros_OBJECTS) $(mc_install_default_macros_DEPENDENCIES) + @rm -f mc-install-default-macros$(EXEEXT) + $(LINK) $(mc_install_default_macros_OBJECTS) $(mc_install_default_macros_LDADD) $(LIBS) +@@ -509,21 +553,21 @@ + + .c.o: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c $< + + .c.obj: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: + @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< +@@ -536,88 +580,103 @@ + install-builderDATA: $(builder_DATA) + @$(NORMAL_INSTALL) + test -z "$(builderdir)" || $(MKDIR_P) "$(DESTDIR)$(builderdir)" +- @list='$(builder_DATA)'; for p in $$list; do \ ++ @list='$(builder_DATA)'; test -n "$(builderdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(builderDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(builderdir)/$$f'"; \ +- $(builderDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(builderdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(builderdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(builderdir)" || exit $$?; \ + done + + uninstall-builderDATA: + @$(NORMAL_UNINSTALL) +- @list='$(builder_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(builderdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(builderdir)/$$f"; \ +- done ++ @list='$(builder_DATA)'; test -n "$(builderdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(builderdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(builderdir)" && rm -f $$files + install-desktop_iconsDATA: $(desktop_icons_DATA) + @$(NORMAL_INSTALL) + test -z "$(desktop_iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(desktop_iconsdir)" +- @list='$(desktop_icons_DATA)'; for p in $$list; do \ ++ @list='$(desktop_icons_DATA)'; test -n "$(desktop_iconsdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(desktop_iconsDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(desktop_iconsdir)/$$f'"; \ +- $(desktop_iconsDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(desktop_iconsdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(desktop_iconsdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(desktop_iconsdir)" || exit $$?; \ + done + + uninstall-desktop_iconsDATA: + @$(NORMAL_UNINSTALL) +- @list='$(desktop_icons_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(desktop_iconsdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(desktop_iconsdir)/$$f"; \ +- done ++ @list='$(desktop_icons_DATA)'; test -n "$(desktop_iconsdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(desktop_iconsdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(desktop_iconsdir)" && rm -f $$files + install-schemasDATA: $(schemas_DATA) + @$(NORMAL_INSTALL) + test -z "$(schemasdir)" || $(MKDIR_P) "$(DESTDIR)$(schemasdir)" +- @list='$(schemas_DATA)'; for p in $$list; do \ ++ @list='$(schemas_DATA)'; test -n "$(schemasdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(schemasDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(schemasdir)/$$f'"; \ +- $(schemasDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(schemasdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(schemasdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(schemasdir)" || exit $$?; \ + done + + uninstall-schemasDATA: + @$(NORMAL_UNINSTALL) +- @list='$(schemas_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(schemasdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(schemasdir)/$$f"; \ +- done ++ @list='$(schemas_DATA)'; test -n "$(schemasdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(schemasdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(schemasdir)" && rm -f $$files + install-serverDATA: $(server_DATA) + @$(NORMAL_INSTALL) + test -z "$(serverdir)" || $(MKDIR_P) "$(DESTDIR)$(serverdir)" +- @list='$(server_DATA)'; for p in $$list; do \ ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(serverDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(serverdir)/$$f'"; \ +- $(serverDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(serverdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(serverdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(serverdir)" || exit $$?; \ + done + + uninstall-serverDATA: + @$(NORMAL_UNINSTALL) +- @list='$(server_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(serverdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(serverdir)/$$f"; \ +- done ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(serverdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(serverdir)" && rm -f $$files + install-uiDATA: $(ui_DATA) + @$(NORMAL_INSTALL) + test -z "$(uidir)" || $(MKDIR_P) "$(DESTDIR)$(uidir)" +- @list='$(ui_DATA)'; for p in $$list; do \ ++ @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(uiDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(uidir)/$$f'"; \ +- $(uiDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(uidir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(uidir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(uidir)" || exit $$?; \ + done + + uninstall-uiDATA: + @$(NORMAL_UNINSTALL) +- @list='$(ui_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(uidir)/$$f'"; \ +- rm -f "$(DESTDIR)$(uidir)/$$f"; \ +- done ++ @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(uidir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(uidir)" && rm -f $$files + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ +@@ -631,7 +690,7 @@ + + TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ ++ set x; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ +@@ -639,29 +698,34 @@ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ shift; \ ++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique; \ ++ if test $$# -gt 0; then \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ "$$@" $$unique; \ ++ else \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$unique; \ ++ fi; \ + fi + ctags: CTAGS + CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$tags $$unique ++ $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && cd $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) $$here ++ && $(am__cd) $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) "$$here" + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +@@ -682,13 +746,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -720,6 +788,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -742,6 +811,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -751,21 +822,30 @@ + install-serverDATA install-toolPROGRAMS install-uiDATA + @$(NORMAL_INSTALL) + $(MAKE) $(AM_MAKEFLAGS) install-data-hook +- + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: install-libexecPROGRAMS + + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -791,7 +871,6 @@ + uninstall-serverDATA uninstall-toolPROGRAMS uninstall-uiDATA + @$(NORMAL_INSTALL) + $(MAKE) $(AM_MAKEFLAGS) uninstall-hook +- + .MAKE: install-am install-data-am install-strip uninstall-am + + .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ +@@ -837,6 +916,7 @@ + @INTLTOOL_SERVER_RULE@ + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/mixer/docs/Makefile.in gnome-applets-2.28.0.ubuntu/mixer/docs/Makefile.in +--- gnome-applets-2.28.0/mixer/docs/Makefile.in 2009-09-21 08:19:34.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/mixer/docs/Makefile.in 2009-09-21 12:06:45.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -38,8 +39,9 @@ + + ################################################################################ + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -70,6 +72,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +@@ -201,6 +204,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -418,9 +422,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu mixer/docs/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu mixer/docs/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu mixer/docs/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu mixer/docs/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -438,6 +442,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + mostlyclean-libtool: + -rm -f *.lo +@@ -467,13 +472,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -504,6 +513,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -522,6 +532,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -530,18 +542,28 @@ + + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -952,6 +974,7 @@ + dist-hook: doc-dist-hook + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/mixer/Makefile.in gnome-applets-2.28.0.ubuntu/mixer/Makefile.in +--- gnome-applets-2.28.0/mixer/Makefile.in 2009-09-21 08:19:34.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/mixer/Makefile.in 2009-09-21 12:06:44.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -17,8 +18,9 @@ + + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -50,9 +52,9 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + am__installdirs = "$(DESTDIR)$(libexecdir)" "$(DESTDIR)$(schemasdir)" \ + "$(DESTDIR)$(serverdir)" "$(DESTDIR)$(uidir)" +-libexecPROGRAMS_INSTALL = $(INSTALL_PROGRAM) + PROGRAMS = $(libexec_PROGRAMS) + am_mixer_applet2_OBJECTS = applet.$(OBJEXT) dock.$(OBJEXT) \ + load.$(OBJEXT) preferences.$(OBJEXT) +@@ -63,6 +65,7 @@ + DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles ++am__mv = mv -f + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) + LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +@@ -86,18 +89,58 @@ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +-schemasDATA_INSTALL = $(INSTALL_DATA) +-serverDATA_INSTALL = $(INSTALL_DATA) +-uiDATA_INSTALL = $(INSTALL_DATA) ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' + DATA = $(schemas_DATA) $(server_DATA) $(ui_DATA) + HEADERS = $(noinst_HEADERS) + RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive ++AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ ++ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ ++ distdir + ETAGS = etags + CTAGS = ctags + DIST_SUBDIRS = $(SUBDIRS) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++am__relativize = \ ++ dir0=`pwd`; \ ++ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ ++ sed_rest='s,^[^/]*/*,,'; \ ++ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ ++ sed_butlast='s,/*[^/]*$$,,'; \ ++ while test -n "$$dir1"; do \ ++ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ ++ if test "$$first" != "."; then \ ++ if test "$$first" = ".."; then \ ++ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ ++ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ ++ else \ ++ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ ++ if test "$$first2" = "$$first"; then \ ++ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ ++ else \ ++ dir2="../$$dir2"; \ ++ fi; \ ++ dir0="$$dir0"/"$$first"; \ ++ fi; \ ++ fi; \ ++ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ ++ done; \ ++ reldir="$$dir2" + pkgdatadir = @pkgdatadir@ + ACLOCAL = @ACLOCAL@ + ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@ +@@ -226,6 +269,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -378,9 +422,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu mixer/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu mixer/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu mixer/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu mixer/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -398,34 +442,50 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + install-libexecPROGRAMS: $(libexec_PROGRAMS) + @$(NORMAL_INSTALL) + test -z "$(libexecdir)" || $(MKDIR_P) "$(DESTDIR)$(libexecdir)" +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- if test -f $$p \ +- || test -f $$p1 \ +- ; then \ +- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(libexecdir)/$$f'"; \ +- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(libexecdir)/$$f" || exit 1; \ +- else :; fi; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed 's/$(EXEEXT)$$//' | \ ++ while read p p1; do if test -f $$p || test -f $$p1; \ ++ then echo "$$p"; echo "$$p"; else :; fi; \ ++ done | \ ++ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ ++ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ ++ sed 'N;N;N;s,\n, ,g' | \ ++ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ ++ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ ++ if ($$2 == $$4) files[d] = files[d] " " $$1; \ ++ else { print "f", $$3 "/" $$4, $$1; } } \ ++ END { for (d in files) print "f", d, files[d] }' | \ ++ while read type dir files; do \ ++ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ ++ test -z "$$files" || { \ ++ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(libexecdir)$$dir'"; \ ++ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(libexecdir)$$dir" || exit $$?; \ ++ } \ ++ ; done + + uninstall-libexecPROGRAMS: + @$(NORMAL_UNINSTALL) +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " rm -f '$(DESTDIR)$(libexecdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(libexecdir)/$$f"; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ ++ files=`for p in $$list; do echo "$$p"; done | \ ++ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ ++ -e 's/$$/$(EXEEXT)/' `; \ ++ test -n "$$list" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(libexecdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(libexecdir)" && rm -f $$files + + clean-libexecPROGRAMS: +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- echo " rm -f $$p $$f"; \ +- rm -f $$p $$f ; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$$list" || exit 0; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list || exit $$?; \ ++ test -n "$(EXEEXT)" || exit 0; \ ++ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list + mixer_applet2$(EXEEXT): $(mixer_applet2_OBJECTS) $(mixer_applet2_DEPENDENCIES) + @rm -f mixer_applet2$(EXEEXT) + $(LINK) $(mixer_applet2_OBJECTS) $(mixer_applet2_LDADD) $(LIBS) +@@ -443,21 +503,21 @@ + + .c.o: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c $< + + .c.obj: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: + @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< +@@ -470,54 +530,63 @@ + install-schemasDATA: $(schemas_DATA) + @$(NORMAL_INSTALL) + test -z "$(schemasdir)" || $(MKDIR_P) "$(DESTDIR)$(schemasdir)" +- @list='$(schemas_DATA)'; for p in $$list; do \ ++ @list='$(schemas_DATA)'; test -n "$(schemasdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(schemasDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(schemasdir)/$$f'"; \ +- $(schemasDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(schemasdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(schemasdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(schemasdir)" || exit $$?; \ + done + + uninstall-schemasDATA: + @$(NORMAL_UNINSTALL) +- @list='$(schemas_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(schemasdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(schemasdir)/$$f"; \ +- done ++ @list='$(schemas_DATA)'; test -n "$(schemasdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(schemasdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(schemasdir)" && rm -f $$files + install-serverDATA: $(server_DATA) + @$(NORMAL_INSTALL) + test -z "$(serverdir)" || $(MKDIR_P) "$(DESTDIR)$(serverdir)" +- @list='$(server_DATA)'; for p in $$list; do \ ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(serverDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(serverdir)/$$f'"; \ +- $(serverDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(serverdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(serverdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(serverdir)" || exit $$?; \ + done + + uninstall-serverDATA: + @$(NORMAL_UNINSTALL) +- @list='$(server_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(serverdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(serverdir)/$$f"; \ +- done ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(serverdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(serverdir)" && rm -f $$files + install-uiDATA: $(ui_DATA) + @$(NORMAL_INSTALL) + test -z "$(uidir)" || $(MKDIR_P) "$(DESTDIR)$(uidir)" +- @list='$(ui_DATA)'; for p in $$list; do \ ++ @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(uiDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(uidir)/$$f'"; \ +- $(uiDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(uidir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(uidir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(uidir)" || exit $$?; \ + done + + uninstall-uiDATA: + @$(NORMAL_UNINSTALL) +- @list='$(ui_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(uidir)/$$f'"; \ +- rm -f "$(DESTDIR)$(uidir)/$$f"; \ +- done ++ @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(uidir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(uidir)" && rm -f $$files + + # This directory's subdirectories are mostly independent; you can cd + # into them and run `make' without going through this Makefile. +@@ -543,7 +612,7 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ +@@ -577,16 +646,16 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" + tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) +@@ -601,7 +670,7 @@ + + TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ ++ set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ +@@ -613,7 +682,7 @@ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ +- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ ++ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ +@@ -622,29 +691,34 @@ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ shift; \ ++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique; \ ++ if test $$# -gt 0; then \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ "$$@" $$unique; \ ++ else \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$unique; \ ++ fi; \ + fi + ctags: CTAGS + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$tags $$unique ++ $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && cd $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) $$here ++ && $(am__cd) $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) "$$here" + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +@@ -665,29 +739,44 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ +- distdir=`$(am__cd) $(distdir) && pwd`; \ +- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ +- (cd $$subdir && \ ++ fi; \ ++ done ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ if test "$$subdir" = .; then :; else \ ++ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ ++ $(am__relativize); \ ++ new_distdir=$$reldir; \ ++ dir1=$$subdir; dir2="$(top_distdir)"; \ ++ $(am__relativize); \ ++ new_top_distdir=$$reldir; \ ++ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ ++ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ++ ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ +- top_distdir="$$top_distdir" \ +- distdir="$$distdir/$$subdir" \ ++ top_distdir="$$new_top_distdir" \ ++ distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ ++ am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ +@@ -721,6 +810,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -743,6 +833,8 @@ + + html: html-recursive + ++html-am: ++ + info: info-recursive + + info-am: +@@ -752,18 +844,28 @@ + + install-dvi: install-dvi-recursive + ++install-dvi-am: ++ + install-exec-am: install-libexecPROGRAMS + + install-html: install-html-recursive + ++install-html-am: ++ + install-info: install-info-recursive + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-recursive + ++install-pdf-am: ++ + install-ps: install-ps-recursive + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -787,8 +889,8 @@ + uninstall-am: uninstall-libexecPROGRAMS uninstall-schemasDATA \ + uninstall-serverDATA uninstall-uiDATA + +-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ +- install-strip ++.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ ++ install-am install-strip tags-recursive + + .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic \ +@@ -821,6 +923,7 @@ + @GCONF_SCHEMAS_INSTALL_TRUE@ GCONF_CONFIG_SOURCE=$(GCONF_SCHEMA_CONFIG_SOURCE) $(GCONFTOOL) --makefile-install-rule $(schemas_DATA) ; + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/modemlights/Makefile.in gnome-applets-2.28.0.ubuntu/modemlights/Makefile.in +--- gnome-applets-2.28.0/modemlights/Makefile.in 2009-09-21 08:19:34.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/modemlights/Makefile.in 2009-09-21 12:06:45.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -18,8 +19,9 @@ + + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -50,9 +52,9 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + am__installdirs = "$(DESTDIR)$(libexecdir)" "$(DESTDIR)$(builderdir)" \ + "$(DESTDIR)$(serverdir)" "$(DESTDIR)$(uidir)" +-libexecPROGRAMS_INSTALL = $(INSTALL_PROGRAM) + PROGRAMS = $(libexec_PROGRAMS) + am_modem_applet_OBJECTS = modem-applet.$(OBJEXT) + modem_applet_OBJECTS = $(am_modem_applet_OBJECTS) +@@ -61,6 +63,7 @@ + DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles ++am__mv = mv -f + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) + LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +@@ -77,10 +80,22 @@ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +-builderDATA_INSTALL = $(INSTALL_DATA) +-serverDATA_INSTALL = $(INSTALL_DATA) +-uiDATA_INSTALL = $(INSTALL_DATA) ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' + DATA = $(builder_DATA) $(server_DATA) $(ui_DATA) + ETAGS = etags + CTAGS = ctags +@@ -213,6 +228,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -358,9 +374,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu modemlights/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu modemlights/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu modemlights/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu modemlights/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -378,34 +394,50 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + install-libexecPROGRAMS: $(libexec_PROGRAMS) + @$(NORMAL_INSTALL) + test -z "$(libexecdir)" || $(MKDIR_P) "$(DESTDIR)$(libexecdir)" +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- if test -f $$p \ +- || test -f $$p1 \ +- ; then \ +- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(libexecdir)/$$f'"; \ +- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(libexecdir)/$$f" || exit 1; \ +- else :; fi; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed 's/$(EXEEXT)$$//' | \ ++ while read p p1; do if test -f $$p || test -f $$p1; \ ++ then echo "$$p"; echo "$$p"; else :; fi; \ ++ done | \ ++ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ ++ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ ++ sed 'N;N;N;s,\n, ,g' | \ ++ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ ++ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ ++ if ($$2 == $$4) files[d] = files[d] " " $$1; \ ++ else { print "f", $$3 "/" $$4, $$1; } } \ ++ END { for (d in files) print "f", d, files[d] }' | \ ++ while read type dir files; do \ ++ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ ++ test -z "$$files" || { \ ++ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(libexecdir)$$dir'"; \ ++ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(libexecdir)$$dir" || exit $$?; \ ++ } \ ++ ; done + + uninstall-libexecPROGRAMS: + @$(NORMAL_UNINSTALL) +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " rm -f '$(DESTDIR)$(libexecdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(libexecdir)/$$f"; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ ++ files=`for p in $$list; do echo "$$p"; done | \ ++ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ ++ -e 's/$$/$(EXEEXT)/' `; \ ++ test -n "$$list" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(libexecdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(libexecdir)" && rm -f $$files + + clean-libexecPROGRAMS: +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- echo " rm -f $$p $$f"; \ +- rm -f $$p $$f ; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$$list" || exit 0; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list || exit $$?; \ ++ test -n "$(EXEEXT)" || exit 0; \ ++ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list + modem_applet$(EXEEXT): $(modem_applet_OBJECTS) $(modem_applet_DEPENDENCIES) + @rm -f modem_applet$(EXEEXT) + $(LINK) $(modem_applet_OBJECTS) $(modem_applet_LDADD) $(LIBS) +@@ -420,21 +452,21 @@ + + .c.o: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c $< + + .c.obj: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: + @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< +@@ -447,54 +479,63 @@ + install-builderDATA: $(builder_DATA) + @$(NORMAL_INSTALL) + test -z "$(builderdir)" || $(MKDIR_P) "$(DESTDIR)$(builderdir)" +- @list='$(builder_DATA)'; for p in $$list; do \ ++ @list='$(builder_DATA)'; test -n "$(builderdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(builderDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(builderdir)/$$f'"; \ +- $(builderDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(builderdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(builderdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(builderdir)" || exit $$?; \ + done + + uninstall-builderDATA: + @$(NORMAL_UNINSTALL) +- @list='$(builder_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(builderdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(builderdir)/$$f"; \ +- done ++ @list='$(builder_DATA)'; test -n "$(builderdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(builderdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(builderdir)" && rm -f $$files + install-serverDATA: $(server_DATA) + @$(NORMAL_INSTALL) + test -z "$(serverdir)" || $(MKDIR_P) "$(DESTDIR)$(serverdir)" +- @list='$(server_DATA)'; for p in $$list; do \ ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(serverDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(serverdir)/$$f'"; \ +- $(serverDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(serverdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(serverdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(serverdir)" || exit $$?; \ + done + + uninstall-serverDATA: + @$(NORMAL_UNINSTALL) +- @list='$(server_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(serverdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(serverdir)/$$f"; \ +- done ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(serverdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(serverdir)" && rm -f $$files + install-uiDATA: $(ui_DATA) + @$(NORMAL_INSTALL) + test -z "$(uidir)" || $(MKDIR_P) "$(DESTDIR)$(uidir)" +- @list='$(ui_DATA)'; for p in $$list; do \ ++ @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(uiDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(uidir)/$$f'"; \ +- $(uiDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(uidir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(uidir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(uidir)" || exit $$?; \ + done + + uninstall-uiDATA: + @$(NORMAL_UNINSTALL) +- @list='$(ui_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(uidir)/$$f'"; \ +- rm -f "$(DESTDIR)$(uidir)/$$f"; \ +- done ++ @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(uidir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(uidir)" && rm -f $$files + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ +@@ -508,7 +549,7 @@ + + TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ ++ set x; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ +@@ -516,29 +557,34 @@ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ shift; \ ++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique; \ ++ if test $$# -gt 0; then \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ "$$@" $$unique; \ ++ else \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$unique; \ ++ fi; \ + fi + ctags: CTAGS + CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$tags $$unique ++ $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && cd $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) $$here ++ && $(am__cd) $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) "$$here" + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +@@ -559,13 +605,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -597,6 +647,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -618,6 +669,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -627,18 +680,28 @@ + + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: install-libexecPROGRAMS + + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -729,6 +792,7 @@ + fi + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/multiload/docs/Makefile.in gnome-applets-2.28.0.ubuntu/multiload/docs/Makefile.in +--- gnome-applets-2.28.0/multiload/docs/Makefile.in 2009-09-21 08:19:34.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/multiload/docs/Makefile.in 2009-09-21 12:06:45.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -38,8 +39,9 @@ + + ################################################################################ + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -70,6 +72,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +@@ -201,6 +204,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -421,9 +425,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu multiload/docs/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu multiload/docs/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu multiload/docs/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu multiload/docs/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -441,6 +445,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + mostlyclean-libtool: + -rm -f *.lo +@@ -470,13 +475,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -507,6 +516,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -525,6 +535,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -533,18 +545,28 @@ + + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -955,6 +977,7 @@ + dist-hook: doc-dist-hook + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/multiload/Makefile.in gnome-applets-2.28.0.ubuntu/multiload/Makefile.in +--- gnome-applets-2.28.0/multiload/Makefile.in 2009-09-21 08:19:34.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/multiload/Makefile.in 2009-09-21 12:06:45.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -16,8 +17,9 @@ + + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -48,9 +50,9 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + am__installdirs = "$(DESTDIR)$(libexecdir)" "$(DESTDIR)$(schemasdir)" \ + "$(DESTDIR)$(serverdir)" "$(DESTDIR)$(uidir)" +-libexecPROGRAMS_INSTALL = $(INSTALL_PROGRAM) + PROGRAMS = $(libexec_PROGRAMS) + am_multiload_applet_2_OBJECTS = linux-proc.$(OBJEXT) \ + load-graph.$(OBJEXT) main.$(OBJEXT) properties.$(OBJEXT) \ +@@ -62,6 +64,7 @@ + DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles ++am__mv = mv -f + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) + LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +@@ -85,17 +88,57 @@ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +-schemasDATA_INSTALL = $(INSTALL_DATA) +-serverDATA_INSTALL = $(INSTALL_DATA) +-uiDATA_INSTALL = $(INSTALL_DATA) ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' + DATA = $(schemas_DATA) $(server_DATA) $(ui_DATA) + RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive ++AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ ++ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ ++ distdir + ETAGS = etags + CTAGS = ctags + DIST_SUBDIRS = $(SUBDIRS) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++am__relativize = \ ++ dir0=`pwd`; \ ++ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ ++ sed_rest='s,^[^/]*/*,,'; \ ++ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ ++ sed_butlast='s,/*[^/]*$$,,'; \ ++ while test -n "$$dir1"; do \ ++ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ ++ if test "$$first" != "."; then \ ++ if test "$$first" = ".."; then \ ++ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ ++ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ ++ else \ ++ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ ++ if test "$$first2" = "$$first"; then \ ++ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ ++ else \ ++ dir2="../$$dir2"; \ ++ fi; \ ++ dir0="$$dir0"/"$$first"; \ ++ fi; \ ++ fi; \ ++ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ ++ done; \ ++ reldir="$$dir2" + pkgdatadir = @pkgdatadir@ + ACLOCAL = @ACLOCAL@ + ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@ +@@ -224,6 +267,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -377,9 +421,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu multiload/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu multiload/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu multiload/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu multiload/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -397,34 +441,50 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + install-libexecPROGRAMS: $(libexec_PROGRAMS) + @$(NORMAL_INSTALL) + test -z "$(libexecdir)" || $(MKDIR_P) "$(DESTDIR)$(libexecdir)" +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- if test -f $$p \ +- || test -f $$p1 \ +- ; then \ +- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(libexecdir)/$$f'"; \ +- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(libexecdir)/$$f" || exit 1; \ +- else :; fi; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed 's/$(EXEEXT)$$//' | \ ++ while read p p1; do if test -f $$p || test -f $$p1; \ ++ then echo "$$p"; echo "$$p"; else :; fi; \ ++ done | \ ++ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ ++ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ ++ sed 'N;N;N;s,\n, ,g' | \ ++ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ ++ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ ++ if ($$2 == $$4) files[d] = files[d] " " $$1; \ ++ else { print "f", $$3 "/" $$4, $$1; } } \ ++ END { for (d in files) print "f", d, files[d] }' | \ ++ while read type dir files; do \ ++ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ ++ test -z "$$files" || { \ ++ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(libexecdir)$$dir'"; \ ++ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(libexecdir)$$dir" || exit $$?; \ ++ } \ ++ ; done + + uninstall-libexecPROGRAMS: + @$(NORMAL_UNINSTALL) +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " rm -f '$(DESTDIR)$(libexecdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(libexecdir)/$$f"; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ ++ files=`for p in $$list; do echo "$$p"; done | \ ++ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ ++ -e 's/$$/$(EXEEXT)/' `; \ ++ test -n "$$list" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(libexecdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(libexecdir)" && rm -f $$files + + clean-libexecPROGRAMS: +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- echo " rm -f $$p $$f"; \ +- rm -f $$p $$f ; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$$list" || exit 0; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list || exit $$?; \ ++ test -n "$(EXEEXT)" || exit 0; \ ++ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list + multiload-applet-2$(EXEEXT): $(multiload_applet_2_OBJECTS) $(multiload_applet_2_DEPENDENCIES) + @rm -f multiload-applet-2$(EXEEXT) + $(LINK) $(multiload_applet_2_OBJECTS) $(multiload_applet_2_LDADD) $(LIBS) +@@ -444,21 +504,21 @@ + + .c.o: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c $< + + .c.obj: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: + @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< +@@ -471,54 +531,63 @@ + install-schemasDATA: $(schemas_DATA) + @$(NORMAL_INSTALL) + test -z "$(schemasdir)" || $(MKDIR_P) "$(DESTDIR)$(schemasdir)" +- @list='$(schemas_DATA)'; for p in $$list; do \ ++ @list='$(schemas_DATA)'; test -n "$(schemasdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(schemasDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(schemasdir)/$$f'"; \ +- $(schemasDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(schemasdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(schemasdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(schemasdir)" || exit $$?; \ + done + + uninstall-schemasDATA: + @$(NORMAL_UNINSTALL) +- @list='$(schemas_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(schemasdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(schemasdir)/$$f"; \ +- done ++ @list='$(schemas_DATA)'; test -n "$(schemasdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(schemasdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(schemasdir)" && rm -f $$files + install-serverDATA: $(server_DATA) + @$(NORMAL_INSTALL) + test -z "$(serverdir)" || $(MKDIR_P) "$(DESTDIR)$(serverdir)" +- @list='$(server_DATA)'; for p in $$list; do \ ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(serverDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(serverdir)/$$f'"; \ +- $(serverDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(serverdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(serverdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(serverdir)" || exit $$?; \ + done + + uninstall-serverDATA: + @$(NORMAL_UNINSTALL) +- @list='$(server_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(serverdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(serverdir)/$$f"; \ +- done ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(serverdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(serverdir)" && rm -f $$files + install-uiDATA: $(ui_DATA) + @$(NORMAL_INSTALL) + test -z "$(uidir)" || $(MKDIR_P) "$(DESTDIR)$(uidir)" +- @list='$(ui_DATA)'; for p in $$list; do \ ++ @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(uiDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(uidir)/$$f'"; \ +- $(uiDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(uidir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(uidir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(uidir)" || exit $$?; \ + done + + uninstall-uiDATA: + @$(NORMAL_UNINSTALL) +- @list='$(ui_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(uidir)/$$f'"; \ +- rm -f "$(DESTDIR)$(uidir)/$$f"; \ +- done ++ @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(uidir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(uidir)" && rm -f $$files + + # This directory's subdirectories are mostly independent; you can cd + # into them and run `make' without going through this Makefile. +@@ -544,7 +613,7 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ +@@ -578,16 +647,16 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" + tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) +@@ -602,7 +671,7 @@ + + TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ ++ set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ +@@ -614,7 +683,7 @@ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ +- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ ++ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ +@@ -623,29 +692,34 @@ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ shift; \ ++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique; \ ++ if test $$# -gt 0; then \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ "$$@" $$unique; \ ++ else \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$unique; \ ++ fi; \ + fi + ctags: CTAGS + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$tags $$unique ++ $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && cd $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) $$here ++ && $(am__cd) $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) "$$here" + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +@@ -666,29 +740,44 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ +- distdir=`$(am__cd) $(distdir) && pwd`; \ +- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ +- (cd $$subdir && \ ++ fi; \ ++ done ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ if test "$$subdir" = .; then :; else \ ++ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ ++ $(am__relativize); \ ++ new_distdir=$$reldir; \ ++ dir1=$$subdir; dir2="$(top_distdir)"; \ ++ $(am__relativize); \ ++ new_top_distdir=$$reldir; \ ++ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ ++ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ++ ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ +- top_distdir="$$top_distdir" \ +- distdir="$$distdir/$$subdir" \ ++ top_distdir="$$new_top_distdir" \ ++ distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ ++ am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ +@@ -722,6 +811,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -744,6 +834,8 @@ + + html: html-recursive + ++html-am: ++ + info: info-recursive + + info-am: +@@ -753,18 +845,28 @@ + + install-dvi: install-dvi-recursive + ++install-dvi-am: ++ + install-exec-am: install-libexecPROGRAMS + + install-html: install-html-recursive + ++install-html-am: ++ + install-info: install-info-recursive + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-recursive + ++install-pdf-am: ++ + install-ps: install-ps-recursive + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -788,8 +890,8 @@ + uninstall-am: uninstall-libexecPROGRAMS uninstall-schemasDATA \ + uninstall-serverDATA uninstall-uiDATA + +-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ +- install-strip ++.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ ++ install-am install-strip tags-recursive + + .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic \ +@@ -822,6 +924,7 @@ + @GCONF_SCHEMAS_INSTALL_TRUE@ GCONF_CONFIG_SOURCE=$(GCONF_SCHEMA_CONFIG_SOURCE) $(GCONFTOOL) --makefile-install-rule $(schemas_DATA) ; + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/null_applet/Makefile.in gnome-applets-2.28.0.ubuntu/null_applet/Makefile.in +--- gnome-applets-2.28.0/null_applet/Makefile.in 2009-09-21 08:19:34.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/null_applet/Makefile.in 2009-09-21 12:06:45.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -16,8 +17,9 @@ + + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -48,8 +50,8 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + am__installdirs = "$(DESTDIR)$(libexecdir)" "$(DESTDIR)$(serverdir)" +-libexecPROGRAMS_INSTALL = $(INSTALL_PROGRAM) + PROGRAMS = $(libexec_PROGRAMS) + am_null_applet_OBJECTS = null_applet.$(OBJEXT) + null_applet_OBJECTS = $(am_null_applet_OBJECTS) +@@ -58,6 +60,7 @@ + DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles ++am__mv = mv -f + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) + LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +@@ -74,8 +77,22 @@ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +-serverDATA_INSTALL = $(INSTALL_DATA) ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' + DATA = $(server_DATA) + ETAGS = etags + CTAGS = ctags +@@ -208,6 +225,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -314,6 +332,7 @@ + $(GNOME_APPLETS_CFLAGS) + + @BUILD_MIXER_APPLET_FALSE@mixer_server_in = GNOME_MixerApplet.server.in ++@BUILD_BATTSTAT_APPLET_FALSE@battstat_server_in = GNOME_BattstatApplet.server.in + null_applet_SOURCES = null_applet.c + null_applet_LDADD = $(GNOME_APPLETS_LIBS) + serverdir = $(libdir)/bonobo/servers +@@ -321,8 +340,10 @@ + GNOME_NullApplet_Factory.server.in \ + GNOME_CDPlayerApplet.server.in \ + GNOME_MailcheckApplet_Factory.server.in \ ++ GNOME_ModemLights.server.in \ + GNOME_Panel_WirelessApplet.server.in \ +- $(mixer_server_in) ++ $(mixer_server_in) \ ++ $(battstat_server_in) + + server_DATA = $(server_in_files:.server.in=.server) + CLEANFILES = GNOME_NullApplet_Factory.server.in $(server_DATA) +@@ -330,8 +351,10 @@ + GNOME_NullApplet_Factory.server.in.in \ + GNOME_CDPlayerApplet.server.in \ + GNOME_MailcheckApplet_Factory.server.in \ ++ GNOME_ModemLights.server.in \ + GNOME_Panel_WirelessApplet.server.in \ +- GNOME_MixerApplet.server.in ++ GNOME_MixerApplet.server.in \ ++ GNOME_BattstatApplet.server.in + + all: all-am + +@@ -346,9 +369,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu null_applet/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu null_applet/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu null_applet/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu null_applet/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -366,34 +389,50 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + install-libexecPROGRAMS: $(libexec_PROGRAMS) + @$(NORMAL_INSTALL) + test -z "$(libexecdir)" || $(MKDIR_P) "$(DESTDIR)$(libexecdir)" +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- if test -f $$p \ +- || test -f $$p1 \ +- ; then \ +- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(libexecdir)/$$f'"; \ +- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(libexecdir)/$$f" || exit 1; \ +- else :; fi; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed 's/$(EXEEXT)$$//' | \ ++ while read p p1; do if test -f $$p || test -f $$p1; \ ++ then echo "$$p"; echo "$$p"; else :; fi; \ ++ done | \ ++ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ ++ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ ++ sed 'N;N;N;s,\n, ,g' | \ ++ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ ++ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ ++ if ($$2 == $$4) files[d] = files[d] " " $$1; \ ++ else { print "f", $$3 "/" $$4, $$1; } } \ ++ END { for (d in files) print "f", d, files[d] }' | \ ++ while read type dir files; do \ ++ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ ++ test -z "$$files" || { \ ++ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(libexecdir)$$dir'"; \ ++ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(libexecdir)$$dir" || exit $$?; \ ++ } \ ++ ; done + + uninstall-libexecPROGRAMS: + @$(NORMAL_UNINSTALL) +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " rm -f '$(DESTDIR)$(libexecdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(libexecdir)/$$f"; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ ++ files=`for p in $$list; do echo "$$p"; done | \ ++ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ ++ -e 's/$$/$(EXEEXT)/' `; \ ++ test -n "$$list" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(libexecdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(libexecdir)" && rm -f $$files + + clean-libexecPROGRAMS: +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- echo " rm -f $$p $$f"; \ +- rm -f $$p $$f ; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$$list" || exit 0; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list || exit $$?; \ ++ test -n "$(EXEEXT)" || exit 0; \ ++ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list + null_applet$(EXEEXT): $(null_applet_OBJECTS) $(null_applet_DEPENDENCIES) + @rm -f null_applet$(EXEEXT) + $(LINK) $(null_applet_OBJECTS) $(null_applet_LDADD) $(LIBS) +@@ -408,21 +447,21 @@ + + .c.o: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c $< + + .c.obj: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: + @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< +@@ -435,20 +474,23 @@ + install-serverDATA: $(server_DATA) + @$(NORMAL_INSTALL) + test -z "$(serverdir)" || $(MKDIR_P) "$(DESTDIR)$(serverdir)" +- @list='$(server_DATA)'; for p in $$list; do \ ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(serverDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(serverdir)/$$f'"; \ +- $(serverDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(serverdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(serverdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(serverdir)" || exit $$?; \ + done + + uninstall-serverDATA: + @$(NORMAL_UNINSTALL) +- @list='$(server_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(serverdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(serverdir)/$$f"; \ +- done ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(serverdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(serverdir)" && rm -f $$files + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ +@@ -462,7 +504,7 @@ + + TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ ++ set x; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ +@@ -470,29 +512,34 @@ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ shift; \ ++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique; \ ++ if test $$# -gt 0; then \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ "$$@" $$unique; \ ++ else \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$unique; \ ++ fi; \ + fi + ctags: CTAGS + CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$tags $$unique ++ $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && cd $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) $$here ++ && $(am__cd) $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) "$$here" + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +@@ -513,13 +560,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -551,6 +602,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -572,6 +624,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -580,18 +634,28 @@ + + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: install-libexecPROGRAMS + + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -638,6 +702,7 @@ + sed -e "s|\@LIBEXECDIR\@|$(libexecdir)|" $< > $@ + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/stickynotes/data/Makefile.in gnome-applets-2.28.0.ubuntu/stickynotes/data/Makefile.in +--- gnome-applets-2.28.0/stickynotes/data/Makefile.in 2009-09-21 08:19:34.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/stickynotes/data/Makefile.in 2009-09-21 12:06:45.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -18,8 +19,9 @@ + # + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -49,6 +51,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +@@ -56,9 +59,23 @@ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' + am__installdirs = "$(DESTDIR)$(serverdir)" +-serverDATA_INSTALL = $(INSTALL_DATA) + DATA = $(server_DATA) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + pkgdatadir = @pkgdatadir@ +@@ -189,6 +206,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -308,9 +326,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu stickynotes/data/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu stickynotes/data/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu stickynotes/data/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu stickynotes/data/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -328,6 +346,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + mostlyclean-libtool: + -rm -f *.lo +@@ -337,20 +356,23 @@ + install-serverDATA: $(server_DATA) + @$(NORMAL_INSTALL) + test -z "$(serverdir)" || $(MKDIR_P) "$(DESTDIR)$(serverdir)" +- @list='$(server_DATA)'; for p in $$list; do \ ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(serverDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(serverdir)/$$f'"; \ +- $(serverDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(serverdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(serverdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(serverdir)" || exit $$?; \ + done + + uninstall-serverDATA: + @$(NORMAL_UNINSTALL) +- @list='$(server_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(serverdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(serverdir)/$$f"; \ +- done ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(serverdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(serverdir)" && rm -f $$files + tags: TAGS + TAGS: + +@@ -374,13 +396,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -412,6 +438,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -430,6 +457,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -438,18 +467,28 @@ + + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -488,6 +527,7 @@ + @BUILD_STICKYNOTES_APPLET_FALSE@@INTLTOOL_SERVER_RULE@ + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/stickynotes/docs/Makefile.in gnome-applets-2.28.0.ubuntu/stickynotes/docs/Makefile.in +--- gnome-applets-2.28.0/stickynotes/docs/Makefile.in 2009-09-21 08:19:35.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/stickynotes/docs/Makefile.in 2009-09-21 12:06:45.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -38,8 +39,9 @@ + + ################################################################################ + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -70,6 +72,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +@@ -201,6 +204,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -423,9 +427,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu stickynotes/docs/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu stickynotes/docs/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu stickynotes/docs/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu stickynotes/docs/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -443,6 +447,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + mostlyclean-libtool: + -rm -f *.lo +@@ -472,13 +477,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -509,6 +518,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -527,6 +537,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -535,18 +547,28 @@ + + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -957,6 +979,7 @@ + dist-hook: doc-dist-hook + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/stickynotes/Makefile.in gnome-applets-2.28.0.ubuntu/stickynotes/Makefile.in +--- gnome-applets-2.28.0/stickynotes/Makefile.in 2009-09-21 08:19:34.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/stickynotes/Makefile.in 2009-09-21 12:06:45.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -16,8 +17,9 @@ + + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -49,10 +51,10 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + am__installdirs = "$(DESTDIR)$(libexecdir)" "$(DESTDIR)$(builderdir)" \ + "$(DESTDIR)$(schemasdir)" "$(DESTDIR)$(serverdir)" \ + "$(DESTDIR)$(uidir)" +-libexecPROGRAMS_INSTALL = $(INSTALL_PROGRAM) + PROGRAMS = $(libexec_PROGRAMS) + am__stickynotes_applet_SOURCES_DIST = util.h util.c stickynotes.h \ + stickynotes_callbacks.h stickynotes_applet.h \ +@@ -74,6 +76,7 @@ + DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles ++am__mv = mv -f + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) + LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +@@ -97,18 +100,57 @@ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +-builderDATA_INSTALL = $(INSTALL_DATA) +-schemasDATA_INSTALL = $(INSTALL_DATA) +-serverDATA_INSTALL = $(INSTALL_DATA) +-uiDATA_INSTALL = $(INSTALL_DATA) ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' + DATA = $(builder_DATA) $(schemas_DATA) $(server_DATA) $(ui_DATA) + RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive ++AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ ++ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ ++ distdir + ETAGS = etags + CTAGS = ctags + DIST_SUBDIRS = $(SUBDIRS) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++am__relativize = \ ++ dir0=`pwd`; \ ++ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ ++ sed_rest='s,^[^/]*/*,,'; \ ++ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ ++ sed_butlast='s,/*[^/]*$$,,'; \ ++ while test -n "$$dir1"; do \ ++ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ ++ if test "$$first" != "."; then \ ++ if test "$$first" = ".."; then \ ++ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ ++ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ ++ else \ ++ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ ++ if test "$$first2" = "$$first"; then \ ++ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ ++ else \ ++ dir2="../$$dir2"; \ ++ fi; \ ++ dir0="$$dir0"/"$$first"; \ ++ fi; \ ++ fi; \ ++ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ ++ done; \ ++ reldir="$$dir2" + pkgdatadir = @pkgdatadir@ + ACLOCAL = @ACLOCAL@ + ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@ +@@ -237,6 +279,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -396,9 +439,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu stickynotes/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu stickynotes/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu stickynotes/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu stickynotes/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -416,34 +459,50 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + install-libexecPROGRAMS: $(libexec_PROGRAMS) + @$(NORMAL_INSTALL) + test -z "$(libexecdir)" || $(MKDIR_P) "$(DESTDIR)$(libexecdir)" +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- if test -f $$p \ +- || test -f $$p1 \ +- ; then \ +- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(libexecdir)/$$f'"; \ +- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(libexecdir)/$$f" || exit 1; \ +- else :; fi; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed 's/$(EXEEXT)$$//' | \ ++ while read p p1; do if test -f $$p || test -f $$p1; \ ++ then echo "$$p"; echo "$$p"; else :; fi; \ ++ done | \ ++ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ ++ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ ++ sed 'N;N;N;s,\n, ,g' | \ ++ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ ++ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ ++ if ($$2 == $$4) files[d] = files[d] " " $$1; \ ++ else { print "f", $$3 "/" $$4, $$1; } } \ ++ END { for (d in files) print "f", d, files[d] }' | \ ++ while read type dir files; do \ ++ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ ++ test -z "$$files" || { \ ++ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(libexecdir)$$dir'"; \ ++ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(libexecdir)$$dir" || exit $$?; \ ++ } \ ++ ; done + + uninstall-libexecPROGRAMS: + @$(NORMAL_UNINSTALL) +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " rm -f '$(DESTDIR)$(libexecdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(libexecdir)/$$f"; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ ++ files=`for p in $$list; do echo "$$p"; done | \ ++ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ ++ -e 's/$$/$(EXEEXT)/' `; \ ++ test -n "$$list" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(libexecdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(libexecdir)" && rm -f $$files + + clean-libexecPROGRAMS: +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- echo " rm -f $$p $$f"; \ +- rm -f $$p $$f ; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$$list" || exit 0; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list || exit $$?; \ ++ test -n "$(EXEEXT)" || exit 0; \ ++ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list + stickynotes_applet$(EXEEXT): $(stickynotes_applet_OBJECTS) $(stickynotes_applet_DEPENDENCIES) + @rm -f stickynotes_applet$(EXEEXT) + $(LINK) $(stickynotes_applet_OBJECTS) $(stickynotes_applet_LDADD) $(LIBS) +@@ -462,21 +521,21 @@ + + .c.o: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c $< + + .c.obj: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: + @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< +@@ -489,71 +548,83 @@ + install-builderDATA: $(builder_DATA) + @$(NORMAL_INSTALL) + test -z "$(builderdir)" || $(MKDIR_P) "$(DESTDIR)$(builderdir)" +- @list='$(builder_DATA)'; for p in $$list; do \ ++ @list='$(builder_DATA)'; test -n "$(builderdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(builderDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(builderdir)/$$f'"; \ +- $(builderDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(builderdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(builderdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(builderdir)" || exit $$?; \ + done + + uninstall-builderDATA: + @$(NORMAL_UNINSTALL) +- @list='$(builder_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(builderdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(builderdir)/$$f"; \ +- done ++ @list='$(builder_DATA)'; test -n "$(builderdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(builderdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(builderdir)" && rm -f $$files + install-schemasDATA: $(schemas_DATA) + @$(NORMAL_INSTALL) + test -z "$(schemasdir)" || $(MKDIR_P) "$(DESTDIR)$(schemasdir)" +- @list='$(schemas_DATA)'; for p in $$list; do \ ++ @list='$(schemas_DATA)'; test -n "$(schemasdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(schemasDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(schemasdir)/$$f'"; \ +- $(schemasDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(schemasdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(schemasdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(schemasdir)" || exit $$?; \ + done + + uninstall-schemasDATA: + @$(NORMAL_UNINSTALL) +- @list='$(schemas_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(schemasdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(schemasdir)/$$f"; \ +- done ++ @list='$(schemas_DATA)'; test -n "$(schemasdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(schemasdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(schemasdir)" && rm -f $$files + install-serverDATA: $(server_DATA) + @$(NORMAL_INSTALL) + test -z "$(serverdir)" || $(MKDIR_P) "$(DESTDIR)$(serverdir)" +- @list='$(server_DATA)'; for p in $$list; do \ ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(serverDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(serverdir)/$$f'"; \ +- $(serverDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(serverdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(serverdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(serverdir)" || exit $$?; \ + done + + uninstall-serverDATA: + @$(NORMAL_UNINSTALL) +- @list='$(server_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(serverdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(serverdir)/$$f"; \ +- done ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(serverdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(serverdir)" && rm -f $$files + install-uiDATA: $(ui_DATA) + @$(NORMAL_INSTALL) + test -z "$(uidir)" || $(MKDIR_P) "$(DESTDIR)$(uidir)" +- @list='$(ui_DATA)'; for p in $$list; do \ ++ @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(uiDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(uidir)/$$f'"; \ +- $(uiDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(uidir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(uidir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(uidir)" || exit $$?; \ + done + + uninstall-uiDATA: + @$(NORMAL_UNINSTALL) +- @list='$(ui_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(uidir)/$$f'"; \ +- rm -f "$(DESTDIR)$(uidir)/$$f"; \ +- done ++ @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(uidir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(uidir)" && rm -f $$files + + # This directory's subdirectories are mostly independent; you can cd + # into them and run `make' without going through this Makefile. +@@ -579,7 +650,7 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ +@@ -613,16 +684,16 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" + tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) +@@ -637,7 +708,7 @@ + + TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ ++ set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ +@@ -649,7 +720,7 @@ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ +- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ ++ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ +@@ -658,29 +729,34 @@ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ shift; \ ++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique; \ ++ if test $$# -gt 0; then \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ "$$@" $$unique; \ ++ else \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$unique; \ ++ fi; \ + fi + ctags: CTAGS + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$tags $$unique ++ $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && cd $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) $$here ++ && $(am__cd) $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) "$$here" + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +@@ -701,29 +777,44 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ +- distdir=`$(am__cd) $(distdir) && pwd`; \ +- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ +- (cd $$subdir && \ ++ fi; \ ++ done ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ if test "$$subdir" = .; then :; else \ ++ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ ++ $(am__relativize); \ ++ new_distdir=$$reldir; \ ++ dir1=$$subdir; dir2="$(top_distdir)"; \ ++ $(am__relativize); \ ++ new_top_distdir=$$reldir; \ ++ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ ++ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ++ ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ +- top_distdir="$$top_distdir" \ +- distdir="$$distdir/$$subdir" \ ++ top_distdir="$$new_top_distdir" \ ++ distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ ++ am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ +@@ -757,6 +848,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -780,6 +872,8 @@ + + html: html-recursive + ++html-am: ++ + info: info-recursive + + info-am: +@@ -789,18 +883,28 @@ + + install-dvi: install-dvi-recursive + ++install-dvi-am: ++ + install-exec-am: install-libexecPROGRAMS + + install-html: install-html-recursive + ++install-html-am: ++ + install-info: install-info-recursive + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-recursive + ++install-pdf-am: ++ + install-ps: install-ps-recursive + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -824,8 +928,8 @@ + uninstall-am: uninstall-builderDATA uninstall-libexecPROGRAMS \ + uninstall-schemasDATA uninstall-serverDATA uninstall-uiDATA + +-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ +- install-strip ++.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ ++ install-am install-strip tags-recursive + + .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic \ +@@ -859,6 +963,7 @@ + @BUILD_STICKYNOTES_APPLET_TRUE@@GCONF_SCHEMAS_INSTALL_TRUE@ $(GCONFTOOL) --makefile-install-rule $(schemas_DATA) + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/stickynotes/pixmaps/Makefile.in gnome-applets-2.28.0.ubuntu/stickynotes/pixmaps/Makefile.in +--- gnome-applets-2.28.0/stickynotes/pixmaps/Makefile.in 2009-09-21 08:19:35.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/stickynotes/pixmaps/Makefile.in 2009-09-21 12:06:45.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -15,8 +16,9 @@ + @SET_MAKE@ + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -46,6 +48,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +@@ -53,9 +56,23 @@ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' + am__installdirs = "$(DESTDIR)$(stickynotes_applet_pixmapsdir)" +-stickynotes_applet_pixmapsDATA_INSTALL = $(INSTALL_DATA) + DATA = $(stickynotes_applet_pixmaps_DATA) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + pkgdatadir = @pkgdatadir@ +@@ -186,6 +203,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -318,9 +336,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu stickynotes/pixmaps/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu stickynotes/pixmaps/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu stickynotes/pixmaps/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu stickynotes/pixmaps/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -338,6 +356,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + mostlyclean-libtool: + -rm -f *.lo +@@ -347,20 +366,23 @@ + install-stickynotes_applet_pixmapsDATA: $(stickynotes_applet_pixmaps_DATA) + @$(NORMAL_INSTALL) + test -z "$(stickynotes_applet_pixmapsdir)" || $(MKDIR_P) "$(DESTDIR)$(stickynotes_applet_pixmapsdir)" +- @list='$(stickynotes_applet_pixmaps_DATA)'; for p in $$list; do \ ++ @list='$(stickynotes_applet_pixmaps_DATA)'; test -n "$(stickynotes_applet_pixmapsdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(stickynotes_applet_pixmapsDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(stickynotes_applet_pixmapsdir)/$$f'"; \ +- $(stickynotes_applet_pixmapsDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(stickynotes_applet_pixmapsdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(stickynotes_applet_pixmapsdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(stickynotes_applet_pixmapsdir)" || exit $$?; \ + done + + uninstall-stickynotes_applet_pixmapsDATA: + @$(NORMAL_UNINSTALL) +- @list='$(stickynotes_applet_pixmaps_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(stickynotes_applet_pixmapsdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(stickynotes_applet_pixmapsdir)/$$f"; \ +- done ++ @list='$(stickynotes_applet_pixmaps_DATA)'; test -n "$(stickynotes_applet_pixmapsdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(stickynotes_applet_pixmapsdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(stickynotes_applet_pixmapsdir)" && rm -f $$files + tags: TAGS + TAGS: + +@@ -384,13 +406,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -421,6 +447,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -439,6 +466,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -448,18 +477,28 @@ + + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -538,6 +577,7 @@ + fi + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/trashapplet/docs/Makefile.in gnome-applets-2.28.0.ubuntu/trashapplet/docs/Makefile.in +--- gnome-applets-2.28.0/trashapplet/docs/Makefile.in 2009-09-21 08:19:35.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/trashapplet/docs/Makefile.in 2009-09-21 12:06:45.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -38,8 +39,9 @@ + + ################################################################################ + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -70,6 +72,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +@@ -201,6 +204,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -418,9 +422,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu trashapplet/docs/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu trashapplet/docs/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu trashapplet/docs/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu trashapplet/docs/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -438,6 +442,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + mostlyclean-libtool: + -rm -f *.lo +@@ -467,13 +472,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -504,6 +513,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -522,6 +532,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -530,18 +542,28 @@ + + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -952,6 +974,7 @@ + dist-hook: doc-dist-hook + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/trashapplet/Makefile.in gnome-applets-2.28.0.ubuntu/trashapplet/Makefile.in +--- gnome-applets-2.28.0/trashapplet/Makefile.in 2009-09-21 08:19:35.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/trashapplet/Makefile.in 2009-09-21 12:06:45.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -15,8 +16,9 @@ + @SET_MAKE@ + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -46,6 +48,7 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ +@@ -60,19 +63,59 @@ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' + am__installdirs = "$(DESTDIR)$(builderdir)" "$(DESTDIR)$(serverdir)" \ + "$(DESTDIR)$(uidir)" +-builderDATA_INSTALL = $(INSTALL_DATA) +-serverDATA_INSTALL = $(INSTALL_DATA) +-uiDATA_INSTALL = $(INSTALL_DATA) + DATA = $(builder_DATA) $(server_DATA) $(ui_DATA) + RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive ++AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ ++ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ ++ distdir + ETAGS = etags + CTAGS = ctags + DIST_SUBDIRS = $(SUBDIRS) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++am__relativize = \ ++ dir0=`pwd`; \ ++ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ ++ sed_rest='s,^[^/]*/*,,'; \ ++ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ ++ sed_butlast='s,/*[^/]*$$,,'; \ ++ while test -n "$$dir1"; do \ ++ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ ++ if test "$$first" != "."; then \ ++ if test "$$first" = ".."; then \ ++ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ ++ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ ++ else \ ++ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ ++ if test "$$first2" = "$$first"; then \ ++ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ ++ else \ ++ dir2="../$$dir2"; \ ++ fi; \ ++ dir0="$$dir0"/"$$first"; \ ++ fi; \ ++ fi; \ ++ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ ++ done; \ ++ reldir="$$dir2" + pkgdatadir = @pkgdatadir@ + ACLOCAL = @ACLOCAL@ + ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@ +@@ -201,6 +244,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -326,9 +370,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu trashapplet/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu trashapplet/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu trashapplet/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu trashapplet/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -346,6 +390,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + + mostlyclean-libtool: + -rm -f *.lo +@@ -355,54 +400,63 @@ + install-builderDATA: $(builder_DATA) + @$(NORMAL_INSTALL) + test -z "$(builderdir)" || $(MKDIR_P) "$(DESTDIR)$(builderdir)" +- @list='$(builder_DATA)'; for p in $$list; do \ ++ @list='$(builder_DATA)'; test -n "$(builderdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(builderDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(builderdir)/$$f'"; \ +- $(builderDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(builderdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(builderdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(builderdir)" || exit $$?; \ + done + + uninstall-builderDATA: + @$(NORMAL_UNINSTALL) +- @list='$(builder_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(builderdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(builderdir)/$$f"; \ +- done ++ @list='$(builder_DATA)'; test -n "$(builderdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(builderdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(builderdir)" && rm -f $$files + install-serverDATA: $(server_DATA) + @$(NORMAL_INSTALL) + test -z "$(serverdir)" || $(MKDIR_P) "$(DESTDIR)$(serverdir)" +- @list='$(server_DATA)'; for p in $$list; do \ ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(serverDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(serverdir)/$$f'"; \ +- $(serverDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(serverdir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(serverdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(serverdir)" || exit $$?; \ + done + + uninstall-serverDATA: + @$(NORMAL_UNINSTALL) +- @list='$(server_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(serverdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(serverdir)/$$f"; \ +- done ++ @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(serverdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(serverdir)" && rm -f $$files + install-uiDATA: $(ui_DATA) + @$(NORMAL_INSTALL) + test -z "$(uidir)" || $(MKDIR_P) "$(DESTDIR)$(uidir)" +- @list='$(ui_DATA)'; for p in $$list; do \ ++ @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ ++ for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f=$(am__strip_dir) \ +- echo " $(uiDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(uidir)/$$f'"; \ +- $(uiDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(uidir)/$$f"; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(uidir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(uidir)" || exit $$?; \ + done + + uninstall-uiDATA: + @$(NORMAL_UNINSTALL) +- @list='$(ui_DATA)'; for p in $$list; do \ +- f=$(am__strip_dir) \ +- echo " rm -f '$(DESTDIR)$(uidir)/$$f'"; \ +- rm -f "$(DESTDIR)$(uidir)/$$f"; \ +- done ++ @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(uidir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(uidir)" && rm -f $$files + + # This directory's subdirectories are mostly independent; you can cd + # into them and run `make' without going through this Makefile. +@@ -428,7 +482,7 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ +@@ -462,16 +516,16 @@ + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" + tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) +@@ -486,7 +540,7 @@ + + TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ ++ set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ +@@ -498,7 +552,7 @@ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ +- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ ++ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ +@@ -507,29 +561,34 @@ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ shift; \ ++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique; \ ++ if test $$# -gt 0; then \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ "$$@" $$unique; \ ++ else \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$unique; \ ++ fi; \ + fi + ctags: CTAGS + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$tags $$unique ++ $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && cd $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) $$here ++ && $(am__cd) $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) "$$here" + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +@@ -550,29 +609,44 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ +- distdir=`$(am__cd) $(distdir) && pwd`; \ +- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ +- (cd $$subdir && \ ++ fi; \ ++ done ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ if test "$$subdir" = .; then :; else \ ++ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ ++ $(am__relativize); \ ++ new_distdir=$$reldir; \ ++ dir1=$$subdir; dir2="$(top_distdir)"; \ ++ $(am__relativize); \ ++ new_top_distdir=$$reldir; \ ++ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ ++ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ++ ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ +- top_distdir="$$top_distdir" \ +- distdir="$$distdir/$$subdir" \ ++ top_distdir="$$new_top_distdir" \ ++ distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ ++ am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ +@@ -606,6 +680,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -624,6 +699,8 @@ + + html: html-recursive + ++html-am: ++ + info: info-recursive + + info-am: +@@ -632,18 +709,28 @@ + + install-dvi: install-dvi-recursive + ++install-dvi-am: ++ + install-exec-am: + + install-html: install-html-recursive + ++install-html-am: ++ + install-info: install-info-recursive + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-recursive + ++install-pdf-am: ++ + install-ps: install-ps-recursive + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -665,8 +752,8 @@ + uninstall-am: uninstall-builderDATA uninstall-serverDATA \ + uninstall-uiDATA + +-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ +- install-strip ++.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ ++ install-am install-strip tags-recursive + + .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic clean-libtool \ +@@ -691,6 +778,7 @@ + @INTLTOOL_SERVER_RULE@ + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -Nur gnome-applets-2.28.0/trashapplet/src/Makefile.in gnome-applets-2.28.0.ubuntu/trashapplet/src/Makefile.in +--- gnome-applets-2.28.0/trashapplet/src/Makefile.in 2009-09-21 08:19:35.000000000 +0200 ++++ gnome-applets-2.28.0.ubuntu/trashapplet/src/Makefile.in 2009-09-21 12:06:45.000000000 +0200 +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.10.2 from Makefile.am. ++# Makefile.in generated by automake 1.11 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -15,8 +16,9 @@ + @SET_MAKE@ + + VPATH = @srcdir@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c +@@ -47,8 +49,8 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + am__installdirs = "$(DESTDIR)$(libexecdir)" +-libexecPROGRAMS_INSTALL = $(INSTALL_PROGRAM) + PROGRAMS = $(libexec_PROGRAMS) + am_trashapplet_OBJECTS = trashapplet.$(OBJEXT) trash-empty.$(OBJEXT) \ + xstuff.$(OBJEXT) +@@ -58,6 +60,7 @@ + DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles ++am__mv = mv -f + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) + LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +@@ -200,6 +203,7 @@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ +@@ -330,9 +334,9 @@ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu trashapplet/src/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu trashapplet/src/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu trashapplet/src/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu trashapplet/src/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -350,34 +354,50 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + install-libexecPROGRAMS: $(libexec_PROGRAMS) + @$(NORMAL_INSTALL) + test -z "$(libexecdir)" || $(MKDIR_P) "$(DESTDIR)$(libexecdir)" +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- if test -f $$p \ +- || test -f $$p1 \ +- ; then \ +- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(libexecdir)/$$f'"; \ +- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(libexecdir)/$$f" || exit 1; \ +- else :; fi; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed 's/$(EXEEXT)$$//' | \ ++ while read p p1; do if test -f $$p || test -f $$p1; \ ++ then echo "$$p"; echo "$$p"; else :; fi; \ ++ done | \ ++ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ ++ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ ++ sed 'N;N;N;s,\n, ,g' | \ ++ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ ++ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ ++ if ($$2 == $$4) files[d] = files[d] " " $$1; \ ++ else { print "f", $$3 "/" $$4, $$1; } } \ ++ END { for (d in files) print "f", d, files[d] }' | \ ++ while read type dir files; do \ ++ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ ++ test -z "$$files" || { \ ++ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(libexecdir)$$dir'"; \ ++ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(libexecdir)$$dir" || exit $$?; \ ++ } \ ++ ; done + + uninstall-libexecPROGRAMS: + @$(NORMAL_UNINSTALL) +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " rm -f '$(DESTDIR)$(libexecdir)/$$f'"; \ +- rm -f "$(DESTDIR)$(libexecdir)/$$f"; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ ++ files=`for p in $$list; do echo "$$p"; done | \ ++ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ ++ -e 's/$$/$(EXEEXT)/' `; \ ++ test -n "$$list" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(libexecdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(libexecdir)" && rm -f $$files + + clean-libexecPROGRAMS: +- @list='$(libexec_PROGRAMS)'; for p in $$list; do \ +- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- echo " rm -f $$p $$f"; \ +- rm -f $$p $$f ; \ +- done ++ @list='$(libexec_PROGRAMS)'; test -n "$$list" || exit 0; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list || exit $$?; \ ++ test -n "$(EXEEXT)" || exit 0; \ ++ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list + trashapplet$(EXEEXT): $(trashapplet_OBJECTS) $(trashapplet_DEPENDENCIES) + @rm -f trashapplet$(EXEEXT) + $(LINK) $(trashapplet_OBJECTS) $(trashapplet_LDADD) $(LIBS) +@@ -394,21 +414,21 @@ + + .c.o: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c $< + + .c.obj: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: + @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< +@@ -431,7 +451,7 @@ + + TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ ++ set x; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ +@@ -439,29 +459,34 @@ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ shift; \ ++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique; \ ++ if test $$# -gt 0; then \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ "$$@" $$unique; \ ++ else \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$unique; \ ++ fi; \ + fi + ctags: CTAGS + CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ +- test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$tags $$unique ++ $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && cd $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) $$here ++ && $(am__cd) $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) "$$here" + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +@@ -482,13 +507,17 @@ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -519,6 +548,7 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -540,6 +570,8 @@ + + html: html-am + ++html-am: ++ + info: info-am + + info-am: +@@ -548,18 +580,28 @@ + + install-dvi: install-dvi-am + ++install-dvi-am: ++ + install-exec-am: install-libexecPROGRAMS + + install-html: install-html-am + ++install-html-am: ++ + install-info: install-info-am + ++install-info-am: ++ + install-man: + + install-pdf: install-pdf-am + ++install-pdf-am: ++ + install-ps: install-ps-am + ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -600,6 +642,7 @@ + + + -include $(top_srcdir)/git.mk ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: --- gnome-applets-2.28.0.orig/debian/patches/86_deprecate_battstatus.patch +++ gnome-applets-2.28.0/debian/patches/86_deprecate_battstatus.patch @@ -0,0 +1,74 @@ +Index: gnome-applets-2.27.92/null_applet/GNOME_BattstatApplet.server.in +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ gnome-applets-2.27.92/null_applet/GNOME_BattstatApplet.server.in 2009-09-09 18:52:19.000000000 +0200 +@@ -0,0 +1,21 @@ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ +Index: gnome-applets-2.27.92/null_applet/Makefile.am +=================================================================== +--- gnome-applets-2.27.92.orig/null_applet/Makefile.am 2009-09-05 22:59:57.000000000 +0200 ++++ gnome-applets-2.27.92/null_applet/Makefile.am 2009-09-09 18:52:40.000000000 +0200 +@@ -8,6 +8,11 @@ + mixer_server_in = GNOME_MixerApplet.server.in + endif + ++## The null applet takes over if the battstat applet isn't built ++if !BUILD_BATTSTAT_APPLET ++battstat_server_in = GNOME_BattstatApplet.server.in ++endif ++ + libexec_PROGRAMS = null_applet + + null_applet_SOURCES = null_applet.c +@@ -20,7 +25,8 @@ + GNOME_CDPlayerApplet.server.in \ + GNOME_MailcheckApplet_Factory.server.in \ + GNOME_Panel_WirelessApplet.server.in \ +- $(mixer_server_in) ++ $(mixer_server_in) \ ++ $(battstat_server_in) + server_DATA = $(server_in_files:.server.in=.server) + + @INTLTOOL_SERVER_RULE@ +@@ -37,6 +43,7 @@ + GNOME_CDPlayerApplet.server.in \ + GNOME_MailcheckApplet_Factory.server.in \ + GNOME_Panel_WirelessApplet.server.in \ +- GNOME_MixerApplet.server.in ++ GNOME_MixerApplet.server.in \ ++ GNOME_BattstatApplet.server.in + + -include $(top_srcdir)/git.mk +Index: gnome-applets-2.27.92/null_applet/null_applet.c +=================================================================== +--- gnome-applets-2.27.92.orig/null_applet/null_applet.c 2009-09-09 18:52:19.000000000 +0200 ++++ gnome-applets-2.27.92/null_applet/null_applet.c 2009-09-09 18:52:19.000000000 +0200 +@@ -44,6 +44,8 @@ + "OAFIID:GNOME_MixerApplet_Factory", _("Volume Control")); + g_hash_table_insert (hash_table, + "OAFIID:GNOME_MixerApplet", _("Volume Control")); ++ g_hash_table_insert (hash_table, ++ "OAFIID:GNOME_BattstatApplet", _("Battery Charge Monitor")); + } + + static gboolean already_running; --- gnome-applets-2.28.0.orig/debian/patches/81_silent_applet_cleaning +++ gnome-applets-2.28.0/debian/patches/81_silent_applet_cleaning @@ -0,0 +1,56 @@ +Index: gnome-applets-2.27.4/null_applet/null_applet.c +=================================================================== +--- gnome-applets-2.27.4.orig/null_applet/null_applet.c 2009-04-23 07:28:03.000000000 +0100 ++++ gnome-applets-2.27.4/null_applet/null_applet.c 2009-08-03 23:17:38.000000000 +0100 +@@ -48,11 +48,13 @@ + + static gboolean already_running; + ++/* + static void + response_cb (GtkWidget *dialog, gint arg1, gpointer user_data) + { + gtk_widget_destroy (dialog); + } ++*/ + + static char + *get_all_applets (void) +@@ -131,16 +133,18 @@ + gpointer user_data) + { + char *applet_list; ++ /* + GtkWidget *dialog; ++ */ + + if (already_running) + { + return FALSE; + } + already_running = TRUE; +- ++ + applet_list = get_all_applets (); +- ++ /* + dialog = gtk_message_dialog_new_with_markup (NULL, + GTK_DIALOG_MODAL | GTK_DIALOG_DESTROY_WITH_PARENT, + GTK_MESSAGE_INFO, GTK_BUTTONS_OK, +@@ -154,13 +158,14 @@ + applet_list, + _("You will not receive this message again.") + ); +- ++ */ + g_free (applet_list); +- ++ /* + g_signal_connect (G_OBJECT (dialog), "response", + G_CALLBACK (response_cb), applet); + + gtk_widget_show_all (dialog); ++ */ + + return TRUE; + } --- gnome-applets-2.28.0.orig/debian/patches/15_path-max.patch +++ gnome-applets-2.28.0/debian/patches/15_path-max.patch @@ -0,0 +1,58 @@ +From beada5329098bb50f7b0dca3e96b577b9e3de3eb Mon Sep 17 00:00:00 2001 +From: Emilio Pozuelo Monfort +Date: Mon, 7 Dec 2009 17:18:35 +0100 +Subject: [PATCH] Bug 603997: Don't unconditionally use PATH_MAX + +Since PATH_MAX is not guaranteed to be defined, unconditionally +using it will cause a build failure on platforms that don't define +it. So stop using it and use dynamic allocation to achieve the same +result. +--- + multiload/linux-proc.c | 28 ++++++++++++++++------------ + 1 files changed, 16 insertions(+), 12 deletions(-) + +diff --git a/multiload/linux-proc.c b/multiload/linux-proc.c +index e168722..5782eec 100644 +--- a/multiload/linux-proc.c ++++ b/multiload/linux-proc.c +@@ -288,21 +288,25 @@ is_net_device_virtual(char *device) + * /sys/class/net/name-of-dev/ . This second method is more complex + * but more reliable. + */ +- char path[PATH_MAX]; ++ gboolean ret = FALSE; ++ char *path = malloc (strlen (device) + strlen ("/sys/class/net//device") + 1); + + /* Check if /sys/class/net/name-of-dev/ exists (may be old linux kernel + * or not linux at all). */ +- if (sprintf(path, "/sys/class/net/%s", device) < 0) +- return FALSE; +- if (access(path, F_OK) != 0) +- return FALSE; /* unknown */ +- +- if (sprintf(path, "/sys/class/net/%s/device", device) < 0) +- return FALSE; +- if (access(path, F_OK) != 0) +- return TRUE; +- +- return FALSE; ++ do { ++ if (sprintf(path, "/sys/class/net/%s", device) < 0) ++ break; ++ if (access(path, F_OK) != 0) ++ break; /* unknown */ ++ ++ if (sprintf(path, "/sys/class/net/%s/device", device) < 0) ++ break; ++ if (access(path, F_OK) != 0) ++ ret = TRUE; ++ } while (0); ++ ++ free (path); ++ return ret; + } + + void +-- +1.6.5.4 + --- gnome-applets-2.28.0.orig/debian/patches/00sticknotes_ui.patch +++ gnome-applets-2.28.0/debian/patches/00sticknotes_ui.patch @@ -0,0 +1,27 @@ +# +# Description: Remove duplicate widget IDs from sticknotes UI +# Upstream: http://bugzilla.gnome.org/show_bug.cgi?id=594797 +# Ubuntu: https://bugs.launchpad.net/ubuntu/+source/gnome-applets/+bug/422110 +# +Index: gnome-applets-2.28.0/stickynotes/stickynotes.ui +=================================================================== +--- gnome-applets-2.28.0.orig/stickynotes/stickynotes.ui 2009-10-20 18:17:57.000000000 +1100 ++++ gnome-applets-2.28.0/stickynotes/stickynotes.ui 2009-10-20 18:18:40.000000000 +1100 +@@ -474,7 +474,7 @@ + + + +- ++ + True + vertical + +@@ -494,7 +494,7 @@ + + + +- ++ + True + 0 + This cannot be undone. --- gnome-applets-2.28.0.orig/debian/patches/80_correct_minicommander_install.patch +++ gnome-applets-2.28.0/debian/patches/80_correct_minicommander_install.patch @@ -0,0 +1,30 @@ +Index: gnome-applets-2.27.3/Makefile.am +=================================================================== +--- gnome-applets-2.27.3.orig/Makefile.am 2009-06-04 02:38:36.000000000 +0100 ++++ gnome-applets-2.27.3/Makefile.am 2009-06-17 23:24:43.000000000 +0100 +@@ -40,11 +40,14 @@ + mixer_applet_SUBDIR = mixer + endif + ++if BUILD_MINICOMMANDER_APPLET ++minicommander_applet_SUBDIR = mini-commander ++endif ++ + always_built_SUBDIRS = \ + charpick \ + drivemount \ + geyes \ +- mini-commander \ + gkb-new \ + stickynotes \ + trashapplet \ +@@ -62,7 +65,8 @@ + $(keyboard_applet_SUBDIRS) \ + $(invest_applet_SUBDIR) \ + $(cpufreq_SUBDIR) \ +- $(mixer_applet_SUBDIR) ++ $(mixer_applet_SUBDIR) \ ++ $(minicommander_applet_SUBDIR) + + DIST_SUBDIRS = \ + po \ --- gnome-applets-2.28.0.orig/debian/patches/99_ltmain_as-needed.patch +++ gnome-applets-2.28.0/debian/patches/99_ltmain_as-needed.patch @@ -0,0 +1,32 @@ +Index: gnome-applets-2.26.1/ltmain.sh +=================================================================== +--- gnome-applets-2.26.1.orig/ltmain.sh 2009-06-17 22:01:22.602313283 +0200 ++++ gnome-applets-2.26.1/ltmain.sh 2009-06-17 22:04:35.394810636 +0200 +@@ -4716,6 +4716,11 @@ func_mode_link () + arg=$func_stripname_result + ;; + ++ -Wl,--as-needed) ++ deplibs="$deplibs $arg" ++ continue ++ ;; ++ + -Wl,*) + func_stripname '-Wl,' '' "$arg" + args=$func_stripname_result +@@ -5070,6 +5075,15 @@ func_mode_link () + lib= + found=no + case $deplib in ++ -Wl,--as-needed) ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ deplibs="$deplib $deplibs" ++ fi ++ continue ++ ;; + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" --- gnome-applets-2.28.0.orig/debian/patches/87_deprecate_modemlights.patch +++ gnome-applets-2.28.0/debian/patches/87_deprecate_modemlights.patch @@ -0,0 +1,59 @@ +Index: gnome-applets-2.27.4/null_applet/GNOME_ModemLights.server.in +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ gnome-applets-2.27.4/null_applet/GNOME_ModemLights.server.in 2009-08-12 23:06:24.000000000 +0100 +@@ -0,0 +1,21 @@ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ +Index: gnome-applets-2.27.4/null_applet/null_applet.c +=================================================================== +--- gnome-applets-2.27.4.orig/null_applet/null_applet.c 2009-08-12 23:06:09.000000000 +0100 ++++ gnome-applets-2.27.4/null_applet/null_applet.c 2009-08-12 23:06:09.000000000 +0100 +@@ -46,6 +46,8 @@ + "OAFIID:GNOME_MixerApplet", _("Volume Control")); + g_hash_table_insert (hash_table, + "OAFIID:GNOME_BattstatApplet", _("Battery Charge Monitor")); ++ g_hash_table_insert (hash_table, ++ "OAFIID:GNOME_ModemLightsApplet", _("Modem Monitor")); + } + + static gboolean already_running; +Index: gnome-applets-2.27.4/null_applet/Makefile.am +=================================================================== +--- gnome-applets-2.27.4.orig/null_applet/Makefile.am 2009-08-12 23:06:09.000000000 +0100 ++++ gnome-applets-2.27.4/null_applet/Makefile.am 2009-08-12 23:06:09.000000000 +0100 +@@ -24,6 +24,7 @@ + GNOME_NullApplet_Factory.server.in \ + GNOME_CDPlayerApplet.server.in \ + GNOME_MailcheckApplet_Factory.server.in \ ++ GNOME_ModemLights.server.in \ + GNOME_Panel_WirelessApplet.server.in \ + $(mixer_server_in) \ + $(battstat_server_in) +@@ -42,6 +43,7 @@ + GNOME_NullApplet_Factory.server.in.in \ + GNOME_CDPlayerApplet.server.in \ + GNOME_MailcheckApplet_Factory.server.in \ ++ GNOME_ModemLights.server.in \ + GNOME_Panel_WirelessApplet.server.in \ + GNOME_MixerApplet.server.in \ + GNOME_BattstatApplet.server.in --- gnome-applets-2.28.0.orig/debian/patches/series +++ gnome-applets-2.28.0/debian/patches/series @@ -0,0 +1,9 @@ +15_path-max.patch +80_correct_minicommander_install.patch +81_silent_applet_cleaning +86_deprecate_battstatus.patch +87_deprecate_modemlights.patch +88_hide_deprecated_mixer.patch +98_autoreconf.patch +99_ltmain_as-needed.patch +00sticknotes_ui.patch --- gnome-applets-2.28.0.orig/debian/patches/88_hide_deprecated_mixer.patch +++ gnome-applets-2.28.0/debian/patches/88_hide_deprecated_mixer.patch @@ -0,0 +1,12 @@ +Index: gnome-applets-2.27.4/null_applet/GNOME_MixerApplet.server.in +=================================================================== +--- gnome-applets-2.27.4.orig/null_applet/GNOME_MixerApplet.server.in 2009-08-12 23:06:59.000000000 +0100 ++++ gnome-applets-2.27.4/null_applet/GNOME_MixerApplet.server.in 2009-08-12 23:07:12.000000000 +0100 +@@ -11,7 +11,6 @@ + + + +- + + +