--- gnome-control-center-2.24.0.1.orig/debian/libgnome-window-settings1.install +++ gnome-control-center-2.24.0.1/debian/libgnome-window-settings1.install @@ -0,0 +1,2 @@ +debian/tmp/usr/lib/libgnome-window-settings.so.* +debian/tmp/usr/lib/libgnome-window-settings1/*.so --- gnome-control-center-2.24.0.1.orig/debian/copyright +++ gnome-control-center-2.24.0.1/debian/copyright @@ -0,0 +1,26 @@ +This package was debianized by Jim Pick jim@jimpick.com on +Sat, 14 Mar 1998 20:12:23 -0800. + +It was downloaded from: + http://ftp.gnome.org/pub/GNOME/sources/gnome-control-center/ + +Copyright: 1998,99,2000 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this package; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, + USA. + +On Debian systems, the complete text of the GNU General +Public License can be found in `/usr/share/common-licenses/GPL'. + --- gnome-control-center-2.24.0.1.orig/debian/watch +++ gnome-control-center-2.24.0.1/debian/watch @@ -0,0 +1,2 @@ +version=2 +http://ftp.gnome.org/pub/gnome/sources/gnome-control-center/([\d\.]+)[0-9]/gnome-control-center-([\d\.]+)\.tar\.gz --- gnome-control-center-2.24.0.1.orig/debian/capplets-data.preinst +++ gnome-control-center-2.24.0.1/debian/capplets-data.preinst @@ -0,0 +1,29 @@ +#!/bin/sh +set -e + +rm_conffile() { + PKGNAME="$1" + CONFFILE="$2" + if [ -e "$CONFFILE" ]; then + md5sum="`md5sum \"$CONFFILE\" | sed -e \"s/ .*//\"`" + old_md5sum="`dpkg-query -W -f='${Conffiles}' $PKGNAME | sed -n -e \"\\\\' $CONFFILE's/.* //p\"`" + if [ "$md5sum" != "$old_md5sum" ]; then + echo "Obsolete conffile $CONFFILE has been modified by you." + echo "Saving as $CONFFILE.dpkg-bak ..." + mv -f "$CONFFILE" "$CONFFILE".dpkg-bak + else + echo "Removing obsolete conffile $CONFFILE ..." + rm -f "$CONFFILE" + fi + fi +} + +case "$1" in +install|upgrade) + if dpkg --compare-versions "$2" le "1:2.23.5-0ubuntu1"; then + rm_conffile capplets-data "/etc/gnome-vfs-2.0/modules/font-method.conf" + rm_conffile capplets-data "/etc/gnome-vfs-2.0/modules/theme-method.conf" + fi +esac + +#DEBHELPER# --- gnome-control-center-2.24.0.1.orig/debian/gnome-keyboard-properties.1 +++ gnome-control-center-2.24.0.1/debian/gnome-keyboard-properties.1 @@ -0,0 +1,54 @@ +.\" Copyright (C) 2007 Sven Arvidsson +.\" +.\" This is free software; you may redistribute it and/or modify +.\" it under the terms of the GNU General Public License as +.\" published by the Free Software Foundation; either version 2, +.\" or (at your option) any later version. +.\" +.\" This is distributed in the hope that it will be useful, but +.\" WITHOUT ANY WARRANTY; without even the implied warranty of +.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +.\" GNU General Public License for more details. +.\" +.\"You should have received a copy of the GNU General Public License along +.\"with this program; if not, write to the Free Software Foundation, Inc., +.\"51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +.TH gnome-keyboard-properties 1 "2007\-09\-27" "GNOME" +.SH NAME +gnome-keyboard-properties \- manage keyboard behaviour in GNOME +.SH SYNOPSIS +.B gnome-keyboard-properties +.RI [ OPTIONS... ] +.SH DESCRIPTION +Keyboard Preferences manages all settings related to the keyboard in a +GNOME environment. This includes key repeat delay, cursor blinking, +layouts and layout options. You can also configure a typing break +which locks the screen and enforces a break from work. +.SH OPTIONS +.TP +.B \-\-apply +Just apply settings and quit (compatibility only; now handled by daemon) +.TP +.B \-\-init\-session\-settings +Just apply settings and quit (compatibility only; now handled by daemon) +.TP +.B \-\-get\-legacy +Retrieve and store legacy settings +.TP +.B \-\-typing-break +Start the page with the typing break settings showing +.P +This program also accepts the standard GNOME and GTK options. +.SH AUTHORS +.B gnome-keyboard-properties +is written by Jonathan Blandford and others. +.P +This manual page was written by Sven Arvidsson , +for the Debian project (but may be used by others). +.SH SEE ALSO +.BR "gtk-options" (7), +.BR "gnome-options" (7) +.P +The online documentation available through the program's +.I Help +menu. --- gnome-control-center-2.24.0.1.orig/debian/libgnome-window-settings-dev.install +++ gnome-control-center-2.24.0.1/debian/libgnome-window-settings-dev.install @@ -0,0 +1,3 @@ +debian/tmp/usr/lib/libgnome-window-settings.so +debian/tmp/usr/include/gnome-window-settings-2.0 +debian/tmp/usr/lib/pkgconfig/gnome-window-settings-2.0.pc --- gnome-control-center-2.24.0.1.orig/debian/gnome-control-center.sgml +++ gnome-control-center-2.24.0.1/debian/gnome-control-center.sgml @@ -0,0 +1,313 @@ +Arnaud"> + Patard"> + Mars 22, 2004"> + 1"> + arnaud.patard@rtp-net.org"> + + gnome-control-center"> + + + Debian"> + GNU"> + GPL"> +]> + + + +
+ &dhemail; +
+ + &dhfirstname; + &dhsurname; + + + 2004 + &dhusername; + + &dhdate; + + + &dhucpackage; + + &dhsection; + + + &dhpackage; + + Desktop properties manager + + + + &dhpackage; + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + DESCRIPTION + + This manual page documents briefly the + &dhpackage; command. + + This manual page was written for the &debian; distribution + because the original program does not have a manual page. + + &dhpackage; is a front-end to configuration applets (capplets) + that lets you configure your GNOME desktop. You may set things such as the background, + the fonts, or the theme + + + + SEE ALSO + gtk-options (7). + + OPTIONS + + These programs follow the usual &gnu; command line syntax, + with long options starting with two dashes (`-'). A summary of + options is included below. + Theses options are mainly the standard command line options of gtk. + + + + + + + Show the help message. + + + + + + + Display brief usage message. + + + + + + + Prevent Gnome Control Center from using Nautilus + + + + + + + Enable Gdk debugging flags. + + + + + + + Disable Gdk debugging flags. + + + + + + + X display to use. + + + + + + + X screen to use. + + + + + + + Make X calls synchronous. + + + + + + + Program name as used by the window manager. + + + + + + + Program class as used by the window manager + + + + + + + Enable Gtk debugging flags. + + + + + + + Disable Gtk debugging flags. + + + + + + + Make all warnings fatal + + + + + + + Load an additional Gtk module. + + + + + + + File descriptor to print IOR on + + + + + + + IID to activate + + + + + + + Prevent registering of server with OAF + + + + + + + Disable sound server usage + + + + + + + Enable sound server usage + + + + + + + Host:port on which the sound server to use is running + + + + + + + Show version. + + + + + + + Specify session management ID + + + + + + + Specify prefix of saved configuration + + + + + + + Disable connection to session manager + + + + + + + Don't show crash dialog box. + + + + + + + AUTHOR + + This manual page was written by &dhusername; &dhemail; for + the &debian; system (but may be used by others). Permission is + granted to copy, distribute and/or modify this document under + the terms of the &gnu; General Public License, Version 2 any + later version published by the Free Software Foundation. + + + On Debian systems, the complete text of the GNU General Public + License can be found in /usr/share/common-licenses/GPL. + + + + + + + + --- gnome-control-center-2.24.0.1.orig/debian/gnome-control-center.manpages +++ gnome-control-center-2.24.0.1/debian/gnome-control-center.manpages @@ -0,0 +1 @@ +debian/gnome-keyboard-properties.1 --- gnome-control-center-2.24.0.1.orig/debian/control +++ gnome-control-center-2.24.0.1/debian/control @@ -0,0 +1,140 @@ +Source: gnome-control-center +Section: gnome +Priority: optional +Maintainer: Ubuntu Desktop Team +XSBC-Original-Maintainer: Marco Cabizza +Uploaders: Debian GNOME Maintainers +Standards-Version: 3.7.3 +Vcs-Bzr: http://code.launchpad.net/~ubuntu-core-dev/gnome-control-center/ubuntu +Build-Depends: cdbs (>= 0.4.41), + gnome-pkg-tools (>= 0.10), + dpkg-dev (>= 1.13.19), + debhelper (>= 5.0.0), + libgtk2.0-dev (>= 2.11.6), + libgnomeui-dev (>= 2.16.0-2), + intltool (>= 0.35.5), + libglade2-dev (>= 2.4.0-1), + libgnome-desktop-dev (>= 1:2.23.5), + zlib1g-dev, + flex, + libmetacity-dev (>= 1:2.23.1), + libxcursor-dev, + libbonobo2-dev (>= 2.6.2-6), + libnautilus-extension-dev (>= 1:2.21.6), + libxrandr-dev, + docbook-to-man, + libgstreamer0.10-dev (>= 0.10.1.2), + libgstreamer-plugins-base0.10-dev (>= 0.10.1.2), + autotools-dev, + libxss-dev, + libxinerama-dev, + libxft-dev (>= 2.1.2), + libxxf86misc-dev, + libxkbfile-dev, + libebook1.2-dev (>= 1.7.90), + desktop-file-utils, + gnome-doc-utils (>= 0.3.2), + libgnome-menu-dev (>= 2.12.0), + libx11-dev, + libxrender-dev, + libgconf2-dev, + libbonoboui2-dev, + libesd0-dev, + libgnomevfs2-dev, + libfontconfig1-dev, + libfreetype6-dev, + libglib2.0-dev (>= 2.16.0), + libxt-dev, + libhal-dev (>= 0.5.6), + libdbus-1-dev (>= 0.32), + libdbus-glib-1-dev (>= 0.32), + librsvg2-dev, + libpanel-applet2-dev, + libgnomekbd-dev (>= 2.21.4.1), + shared-mime-info, + libpango1.0-dev (>= 1.17), + libgnomekbdui-dev (>= 2.21.4.1), + scrollkeeper, + libxklavier12-dev (>= 3.6), + libeel2-dev, + gnome-settings-daemon-dev (>= 2.22.0), + libcanberra-gtk-dev + +Package: gnome-control-center +Architecture: any +Section: gnome +Depends: ${shlibs:Depends}, + ${misc:Depends}, + capplets-data (>= ${gnome:Version}), + capplets-data (<< ${gnome:NextVersion}), + libgnome-window-settings1 (= ${binary:Version}), + gnome-settings-daemon, + gnome-menus (>= 2.12.0), + gnome-desktop-data, + gnome-icon-theme (>= 2.16), + desktop-file-utils, + gconf2-common (>= 2.23.2-0ubuntu3), + ubuntu-system-service (>= 0.1.10) +Recommends: bzip2, + evolution-data-server, + gnome-user-guide, + mousetweaks, + gnome-session, + screen-resolution-extra +Replaces: capplets +Conflicts: capplets, + gnome-session (<< 2.22.0) +Suggests: esound-clients, + gnome-screensaver | xscreensaver, + xbase-clients, + gstreamer0.10-alsa | gstreamer0.10-audiosink, + xrdb +Description: utilities to configure the GNOME desktop + This package contains configuration applets for the GNOME desktop, + allowing to set accessibility configuration, desktop fonts, keyboard + and mouse properties, sound setup, desktop theme and background, user + interface properties, screen resolution, and other GNOME parameters. + . + It also contains a front end to these applets, which can also be + accessed with the GNOME panel or the Nautilus file manager. + +Package: capplets-data +Architecture: all +Section: gnome +Depends: scrollkeeper, ${misc:Depends} +Recommends: gnome-control-center (>= ${source:Version}) +Description: configuration applets for GNOME 2 - data files + This package contains data files (icons, pixmaps, locales files) needed by + the configuration applets in the gnome-control-center package. + +Package: libgnome-window-settings1 +Architecture: any +Section: libs +Depends: ${shlibs:Depends}, + ${misc:Depends} +Replaces: gnome-control-center (<< 1:2.14.1-1), + capplets +Conflicts: capplets +Description: Utility library for getting window manager settings + This package contains the libwindow-settings library, which is used by + the GNOME window managers. + +Package: libgnome-window-settings-dev +Architecture: all +Section: libdevel +Depends: ${shlibs:Depends}, + ${misc:Depends}, + libgnome-window-settings1 (>= ${source:Version}) +Replaces: gnome-control-center (<< 1:2.14.1-1) +Description: Utility library for getting window manager settings (headers) + This package contains the libwindow-settings library header files. + +Package: gnome-control-center-dev +Architecture: all +Section: devel +Conflicts: libgnome-settings-daemon-dev +Replaces: libgnome-settings-daemon-dev +Depends: ${misc:Depends} +Description: utilities to configure the GNOME desktop + This package contains the file required to get the keydirs location + --- gnome-control-center-2.24.0.1.orig/debian/visual-effects_custom.svg +++ gnome-control-center-2.24.0.1/debian/visual-effects_custom.svg @@ -0,0 +1,767 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + image/svg+xml + + + + Lapo Calamandrei + + + + Visual Effects + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + --- gnome-control-center-2.24.0.1.orig/debian/visual-effects_none.svg +++ gnome-control-center-2.24.0.1/debian/visual-effects_none.svg @@ -0,0 +1,522 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + image/svg+xml + + + + Lapo Calamandrei + + + + Visual Effects + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + --- gnome-control-center-2.24.0.1.orig/debian/gnome-control-center.dirs +++ gnome-control-center-2.24.0.1/debian/gnome-control-center.dirs @@ -0,0 +1 @@ +usr/share/themes/metacity-1 --- gnome-control-center-2.24.0.1.orig/debian/rules +++ gnome-control-center-2.24.0.1/debian/rules @@ -0,0 +1,46 @@ +#!/usr/bin/make -f + +include /usr/share/cdbs/1/rules/debhelper.mk +include /usr/share/cdbs/1/rules/simple-patchsys.mk +include /usr/share/cdbs/1/rules/utils.mk +include /usr/share/cdbs/1/class/gnome.mk +include /usr/share/gnome-pkg-tools/1/rules/uploaders.mk +include /usr/share/gnome-pkg-tools/1/rules/gnome-version.mk +include /usr/share/gnome-pkg-tools/1/rules/clean-la.mk +-include /usr/share/gnome-pkg-tools/1/rules/gnome-get-source.mk + +GNOME_MODULE := gnome-control-center + +LDFLAGS += -Wl,-z,defs -Wl,-O1 -Wl,--as-needed + +DEB_CONFIGURE_EXTRA_FLAGS += --disable-mime-cache \ + --disable-scrollkeeper \ + --enable-aboutme \ + --enable-gstreamer=0.10 \ + --disable-update-mimedb + +DEB_INSTALL_MANPAGES_gnome-control-center += debian/gnome-control-center.1 + +DEB_DH_MAKESHLIBS_ARGS_gnome-control-center = --no-act + +build/gnome-control-center:: $(DEB_INSTALL_MANPAGES_gnome-control-center) + +%.1: %.sgml + /usr/bin/docbook-to-man $< >$@ + +pre-build:: + find . -type f -exec touch '{}' \; + find . -type d -exec touch '{}' \; + +clean:: + rm -f $(DEB_INSTALL_MANPAGES_gnome-control-center) + +install/capplets-data:: + cp debian/visual-effects_custom.svg debian/tmp/usr/share/gnome-control-center/pixmaps + cp debian/visual-effects_extra.svg debian/tmp/usr/share/gnome-control-center/pixmaps + cp debian/visual-effects_none.svg debian/tmp/usr/share/gnome-control-center/pixmaps + cp debian/visual-effects_normal.svg debian/tmp/usr/share/gnome-control-center/pixmaps + +binary-post-install/capplets-data:: + rm -rf debian/capplets-data/usr/share/applications/mimeinfo.cache + dh_installmime -p$(cdbs_curpkg) --- gnome-control-center-2.24.0.1.orig/debian/gnome-control-center-dev.install +++ gnome-control-center-2.24.0.1/debian/gnome-control-center-dev.install @@ -0,0 +1 @@ +debian/tmp/usr/share/pkgconfig --- gnome-control-center-2.24.0.1.orig/debian/gnome-control-center.install +++ gnome-control-center-2.24.0.1/debian/gnome-control-center.install @@ -0,0 +1,3 @@ +debian/tmp/usr/bin/gnome-control-center +debian/control-center2.xpm usr/share/pixmaps +debian/tmp/usr/bin --- gnome-control-center-2.24.0.1.orig/debian/visual-effects_normal.svg +++ gnome-control-center-2.24.0.1/debian/visual-effects_normal.svg @@ -0,0 +1,364 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + image/svg+xml + + + + Lapo Calamandrei + + + + Visual Effects + + + + + + + + + + + + + + + + + + + + + + + + --- gnome-control-center-2.24.0.1.orig/debian/changelog +++ gnome-control-center-2.24.0.1/debian/changelog @@ -0,0 +1,2189 @@ +gnome-control-center (1:2.24.0.1-0ubuntu1) intrepid; urgency=low + + * New upstream version + * debian/patches/96_gnome_appearance_properties_doesnt_crash.patch: + - not required the issue is fixed in the new version + + -- Sebastien Bacher Wed, 24 Sep 2008 21:54:06 +0200 + +gnome-control-center (1:2.24.0-0ubuntu2) intrepid; urgency=low + + * debian/patches/96_gnome_appearance_properties_doesnt_crash.patch: + - don't call refresh_thumbnail using a null value to fix a crasher + + -- Sebastien Bacher Wed, 24 Sep 2008 17:11:20 +0200 + +gnome-control-center (1:2.24.0-0ubuntu1) intrepid; urgency=low + + * New upstream release + * debian/patches/105_cc-randr12-ubuntu-colors.patch: + - removed, the code in question disappeared + * debian/patches/50_ubuntu_systemwide_prefs.patch: + - updated the current glade file + + -- Michael Vogt Tue, 23 Sep 2008 12:12:50 +0200 + +gnome-control-center (1:2.23.90-0ubuntu12) intrepid; urgency=low + + * debian/patches/50_ubuntu_systemwide_prefs.patch: + - fix reseting the proxy environment (LP: #271108) + + -- Michael Vogt Tue, 23 Sep 2008 10:01:28 +0200 + +gnome-control-center (1:2.23.90-0ubuntu11) intrepid; urgency=low + + [ James Westby ] + * debian/patches/50_ubuntu_systemwide_prefs.patch: + - fix typo (LP: #269328) + * debian/patches/107_rr_NULL_output_name.patch + - handle output->name being NULL in on_screen_changed + in the xrandr capplet. (LP: #269595) + + [ Michael Vogt ] + * debian/control.in: + - add missing gconf2-common (>= 2.23.2-0ubuntu3) to ensure + that the gconf system default stuff is working + + -- Michael Vogt Sat, 20 Sep 2008 00:09:11 +0200 + +gnome-control-center (1:2.23.90-0ubuntu10) intrepid; urgency=low + + * debian/patches/50_ubuntu_systemwide_prefs.patch: + - run gconf_client_suggest_sync() before calling SetSystem + * debian/patches/95_desktop-effects-integration.patch: + - update the gconf key to the new gnome-session location + + -- Michael Vogt Thu, 11 Sep 2008 21:34:08 +0200 + +gnome-control-center (1:2.23.90-0ubuntu9) intrepid; urgency=low + + * debian/patches/50_ubuntu_systemwide_prefs.patch: + - make use of the org.gnome.Default.GConf interface + - simplify the UI again + - add "Reset" button + * debian/control.in: + - depend on the latest ubuntu-system-service package + + -- Michael Vogt Thu, 11 Sep 2008 20:13:45 +0200 + +gnome-control-center (1:2.23.90-0ubuntu8) intrepid; urgency=low + + * Rebuild due to the libgnomekbd soname change + + -- Sebastien Bacher Wed, 10 Sep 2008 22:22:06 +0200 + +gnome-control-center (1:2.23.90-0ubuntu7) intrepid; urgency=low + + * debian/patches/51_ubuntu_system_keyboard.patch: + - fix a crash in the new "make system default" keyboard + - Use wording "Apply System-Wide..." + - update the glade file to match the design by + Matthew Paul Thomas + + -- Michael Vogt Wed, 10 Sep 2008 11:22:49 +0200 + +gnome-control-center (1:2.23.90-0ubuntu6) intrepid; urgency=low + + * move packaging into bzr + * cleanup cruft from -0ubuntu1 upload + * debian/patches/51_ubuntu_system_keyboard.patch: + - add patch that implements the global keyboard spec at + https://wiki.ubuntu.com/DefaultKeyboardSettings + * debian/control: + - add vcs-bzr header + - depend on latest ubuntu-system-service package + + -- Michael Vogt Tue, 09 Sep 2008 12:26:40 +0200 + +gnome-control-center (1:2.23.90-0ubuntu5) intrepid; urgency=low + + * control: Add screen-resolution-extra to Recommends now that it is + in main. + + -- Bryce Harrington Thu, 04 Sep 2008 18:14:12 -0700 + +gnome-control-center (1:2.23.90-0ubuntu4) intrepid; urgency=low + + * debian/patches/28_fixup_touchpad_config.patch: Check for the + "Synaptics Off" XInput property to determine if a device is a + touchpad. (LP: #207781) + + -- William Grant Sun, 31 Aug 2008 17:06:55 +1000 + +gnome-control-center (1:2.23.90-0ubuntu3) intrepid; urgency=low + + [Alberto Milone] + * patches/106_screen-res-extra-support.patch: Add use of + screen-resolution-extra for automatically configuring Virtual + setting. (LP: #220563) + + -- Bryce Harrington Fri, 29 Aug 2008 13:09:13 -0700 + +gnome-control-center (1:2.23.90-0ubuntu2) intrepid; urgency=low + + * 80_aspect_in_dropdown.patch: add aspect ratio to display selection + drop-down menu (http://bugzilla.gnome.org/show_bug.cgi?id=549642). + + -- Kees Cook Wed, 27 Aug 2008 14:00:08 -0700 + +gnome-control-center (1:2.23.90-0ubuntu1) intrepid; urgency=low + + * New upstream version: + Appearance: + - Make theme installation from GIO-supported sources work (including + drag and drop) (Jens Granseuer) (#545335) + Default Applications: + - Fix custom commands for mail default application (James Westby) + Display: + - Add a check box to turn on and off display icon (Soren Sandmann) + - Draw rotated outputs rotated (Soren Sandmann) + General: + - Move directory deletion code from appearance capplet into common + code (Bastien Nocera) + - Make the file transfer dialog work with GFiles instead of gchar + paths internally (Jens Granseuer) + - Don't set notification theme to "standard" if the metatheme loaded + doesn't define one (Jens Granseuer) (#546036) + Keybindings: + - When trying to assign a shortcut that is already in use, ask the user + whether to reassign it instead of refusing to do anything (Denis + Washington) (#133318) + Shell: + - Don't do thumbnailing, let Nautilus do it (Federico Mena Quintero) + - Fix a build warning (Cosimo Cecchi) (#544538) + Sound: + - Remove separate bell settings tab (Bastien Nocera) + - Remove libsounds dependency (Bastien Nocera) + - Add freedesktop sound theme support through libcanberra (Bastien Nocera) + - Fix property passing (Lennart Poettering) + - Plug some leaks (Jens Granseuer) + - Add some filtering for OSS devices and create more useful device + descriptions (Alexander Schwenn) (#545275) + Translations: + - ar (Djihed Afifi) + - es (Jorge Gonzalez) + - gl (Ignacio Casal Quinteiro) + - nb (Kjartan Maraas) + - pt_BR (Leonardo Ferreira Fontenelle) + - sv (Daniel Nylander) + + -- Michael Vogt Tue, 19 Aug 2008 12:52:43 +0200 + +gnome-control-center (1:2.23.6-0ubuntu5) intrepid; urgency=low + + * debian/patches/50_ubuntu_systemwide_prefs.patch: + - show system wide defaults + + -- Michael Vogt Tue, 19 Aug 2008 12:36:24 +0200 + +gnome-control-center (1:2.23.6-0ubuntu4) intrepid; urgency=low + + * debian/patches/50_ubuntu_systemwide_prefs.patch: + - add patch to allow setting of the system proxy settings + * debian/control: + - add depends to ubuntu-system-service dbus backend + + -- Michael Vogt Mon, 18 Aug 2008 18:44:27 +0200 + +gnome-control-center (1:2.23.6-0ubuntu3) intrepid; urgency=low + + * 95_desktop-effects-integration.patch: + - update for the new gnome-session (new gconf location). + Thanks to Mehdi Abaakouk (LP: #2536606) + + -- Michael Vogt Mon, 18 Aug 2008 10:55:28 +0200 + +gnome-control-center (1:2.23.6-0ubuntu2) intrepid; urgency=low + + * debian/capplets-data.gconf-defaults: + - don't set a keycode for multimedia keys there, the corresponding schemas + is in gnome-settings-daemon now and already has keysyms set + + -- Sebastien Bacher Wed, 13 Aug 2008 23:50:57 +0200 + +gnome-control-center (1:2.23.6-0ubuntu1) intrepid; urgency=low + + * New upstream version: + Appearance: + - Make theme installation from GIO-supported sources work (including + drag and drop) + Default Applications: + - Fix custom commands for mail default application (lp: #252253) + Display: + - Add a check box to turn on and off display icon + - Draw rotated outputs rotated + General: + - Move directory deletion code from appearance capplet into common code + - Make the file transfer dialog work with GFiles instead of gchar + paths internally + - Don't set notification theme to "standard" if the metatheme loaded + doesn't define one + Keybindings: + - When trying to assign a shortcut that is already in use, ask the user + whether to reassign it instead of refusing to do anything + Shell: + - Don't do thumbnailing, let Nautilus do it + - Fix a build warning + Sound: + - Remove separate bell settings tab + - Remove libsounds dependency + - Add freedesktop sound theme support through libcanberra + - Fix property passing + - Plug some leaks + - Add some filtering for OSS devices and create more useful device + descriptions (lp: #252814) + * debian/control.in: + - build-depends on libcanberra-gtk-dev + * debian/patches/90_from_svn_use_gio_for_themes_copies.patch: + - the change is in the new version + * debian/patches/105_cc-randr12-ubuntu-colors.patch: + - change the color only there + + -- Sebastien Bacher Wed, 06 Aug 2008 11:46:57 +0200 + +gnome-control-center (1:2.23.5-0ubuntu2) intrepid; urgency=low + + * debian/patches/90_from_svn_use_gio_for_themes_copies.patch: + - change from svn to fix non local themes installation (lp: #252885) + + -- Sebastien Bacher Wed, 30 Jul 2008 10:07:18 +0200 + +gnome-control-center (1:2.23.5-0ubuntu1) intrepid; urgency=low + + * New upstream version: + General: + - Remove VFS methods code + - Intltool churn + - Use standard icon names from icon naming spec + Appearance Capplet: + - Don't delete ~/.icons when deleting the last icon theme + - Add notification themes to the metatheme format + Display Capplet: + - New RandR 1.2 based capplet with support for dual screens and stuff. + Default Applications: + - Use -x instead of -e as exec_flag for Terminator. + - Install the default apps list in the default-apps subdirectory + - Make it possible for apps to install additional XML files to + extend the list of available applications + Mouse Capplet: + - Decrease lower boundary of dwell delay to 0.2 + * debian/capplets-data.preinst: + - clean the gnomevfs conffile on upgrade + * debian/control.in: + - updated libgnome-desktop requirement + * debian/capplets-data.install, debian/gnome-control-center.install, + debian/rules: + - updated to the new version changes + * debian/patches/101_cc-add-randr12-capplet.patch, + debian/patches/102_cc-randr12-makefile.patch, + debian/patches/104_cc-randr12-enable-i18n.patch, + debian/patches/106_cc-randr12-capplet-icon.patch, + debian/patches/107_cc-randr12-check-version.patch, + debian/patches/108_cc-randr12-capplet-font-layout.patch, + debian/patches/109_cc-randr12-gui-shrinkage.patch, + debian/patches/110_cc-randr12-revert-dialog.patch, + debian/patches/112_cc-randr12-potfiles.patch, + debian/patches/113_cc-randr12-fix-clone-checkbox.patch, + debian/patches/113_cc-randr12-remove_g_prints.patch, + debian/patches/114_cc-randr12-handle_rw_screen_new_failure.patch, + debian/patches/115_cc-randr12-fix-rebuild-gui.patch, + debian/patches/116_cc-randr12-handle-screen-NULL-in-on_screen_changed.patch, + debian/patches/117_cc-randr12-disable-help-button.patch, + debian/patches/118_cc-randr12-translate-extra-strings.patch: + - dropped, the new version version has the xrandr capplet now + + -- Sebastien Bacher Fri, 25 Jul 2008 14:56:36 +0200 + +gnome-control-center (1:2.23.4-0ubuntu2) intrepid; urgency=low + + * debian/control.in: + - updated gnome-desktop requirement + + -- Sebastien Bacher Tue, 17 Jun 2008 17:43:53 +0200 + +gnome-control-center (1:2.23.4-0ubuntu1) intrepid; urgency=low + + * New upstream version: + default applications: + - Convert to use GConfPropertyEditor and remove a lot of duplicated code in + the process + - Provide a Tango style application icon + typing break: + - When postponing a voluntary break, go back to the state before taking the + break instead of going to warn state + general: + - Increased gnome-desktop requirement + + -- Sebastien Bacher Tue, 17 Jun 2008 09:17:15 +0200 + +gnome-control-center (1:2.23.3-0ubuntu1) intrepid; urgency=low + + * New upstream version: + appearance: + - Remove the last traces of gnome-vfs + - Fix theme deletion + - Update to match API changes in gnome-desktop + - Fix "zoom" mode + - Use URIs instead of paths for drag and drop + - Delay creation of the wallaper file chooser for increased startup + performance + default-applications: + - Major refactoring to use GConfPropertyEditor and reduce code duplication + keybindings: + - Don't use deprecated GTK+ symbol + - Add support for editing custom keybindings (create/delete not yet + implemented) + general: + - Remove themus vfs-method + - Minor cleanup in capplet-util and gconf-property-editor + about-me: + - Fix image scaling on the photo button + - Fix build on Solaris + - Properly handle errors when no icon is available + - Fix handling of Home and Work email addresses + - Close a memory leak + appearance: + - Convert some more parts to gio + - Show errors for incomplete control themes + - Add support for installing missing GTK+ theme engines via PackageKit + keyboard: + - Don't close the Keyboard Layout Options window when the Help button is + clicked + - Access keyboard layouts by country or language + network; + - Drop gnome-vfs dependency + sound: + - Add support for OSS4 mixers + general: + - libbackground is no longer needed + - Remove iso-codes dependency again + - Require libxklavier 3.6 + - Port theme handling code from gnome-vfs to gio + about-me: + - Launch the error dialog with the proper parent + accessibility: + - Add button to launch mouse accessibility properties + - Don't show the "accessible login" button if gdmsetup is not available + - Open the preferred applications dialog on the a11y page + appearance: + - Allow the user to revert a font change proposed by a metatheme + - Add a custom cell renderer for metatheme names to allow rounded corners on + the selection indicator + - Replace gnome-vfs with gio + - Show a warning message when the selected theme is incomplete + default applications: + - Add -p/--show-page to open the dialog on a specific page + keybindings: + - Fix mismatched modifier mapping between egg and GTK + - Fix Esc and Backspace being bindable when Caps Lock is on + - Get rid of unneeded sort model indirection + keyboard: + - Fix various string and layout issues + mouse: + - Add support for starting the capplet on the appearance tab + - Remove unused custom widget + network: + - Renamce "Advanced configuration" tab to "Ignored hosts" + sound: + - Don't mention esd + - Sort mixer devices alphabitically + themus: + - Handle failed thumbnailing attempts properly + windows: + - Add "Maximize Vertically" and "Maximize Horizontally" + to possible double-click + actions + - Require metacity <= 2.23.1 + general: + - Figure out where GTK+ expects its theme engines and make + that info available to interested capplets + - Introduce dependency on iso-codes + updated translations + * Sync on Debian + * debian/control.in: + - don't Build-Depends on libslab-dev, type-handling + - gnome-control-center recommends mousetweaks + - the source name is gnome-control-center now + - updated build requirements + - updated maintainer information + * debian/gnome-control-center.install: + - updated nautilus versionning + * debian/index.theme: + - drop the Debian specific Default theme entry, it's confusing + (Ubuntu: #15268). + * debian/patches/01_fix_libslab_build.patch: + - don't build with the gnome-main-menu libslab for Ubuntu + * debian/patches/01_remove_debian_default_applications.patch: + - remove the debian specific entries + * debian/patches/16_preferred_applications_list_cleanup.patch: + - don't list mozilla alternative as "Mozilla Mail" + * debian/patches/17_default_applications_firefox_3.patch: + - use the correct firefox3 icon + * debian/patches/26_add_touchpad_to_mouse_settings.patch: + - Recreate touchpad page in glade, the previous file didn't work there + for some reason; attempt to make a slight UI improvement in the process. + - Add setting to enable/disable touchpad and callbacks to toggle the + sensitivity of the other widgets accordingly. + * debian/patches/28_fixup_touchpad_config.patch: + - add touchpad configuration + * debian/patches/71_at_properties_gksudo_gdmsetup.patch: + - use gksu to run the gdmsetup command + * debian/patches/95_desktop-effects-integration.patch, + debian/patches/99_autoreconf.patch, + debian/visual-effects_custom.svg, + debian/visual-effects_extra.svg, + debian/visual-effects_none.svg, + debian/visual-effects_normal.svg, + debian/rules: + - add desktop effects tab to the appearance capplet + * debian/patches/97_subpixel_hinting_defaults.patch: + - Controversial patch time. Change the default hinting level for + subpixel rendering from "Full" to "Slight". + + Rationale: hinting is corrupting the shape of the rendered font to + better fix the pixel grid. With subpixel LCD filtering, we have + effectively three times the resolution in which to render the font, + so there's no need to align them to the pixel grid - indeed, doing + that defeats the point of doing things by subpixel at all. + + The outcome of this patch is that the shapes of the fonts will appear + much better when using Subpixel rendering. Some people will complain + about colour fringing, but those people who can detect subpixel + sub-conciously should be using Best Shapes or Best Contrast anyway. + * debian/patches/100_at_properties_readd_gksudo_disable_grab_toggle.patch: + - "no gksu/disable-grab option per gui in gnome-at-properties" + * debian/patches/101_cc-add-randr12-capplet.patch, + debian/patches/102_cc-randr12-makefile.patch, + debian/patches/104_cc-randr12-enable-i18n.patch, + debian/patches/105_cc-randr12-ubuntu-colors.patch, + debian/patches/106_cc-randr12-capplet-icon.patch, + debian/patches/107_cc-randr12-check-version.patch, + debian/patches/108_cc-randr12-capplet-font-layout.patch, + debian/patches/109_cc-randr12-gui-shrinkage.patch, + debian/patches/110_cc-randr12-revert-dialog.patch, + debian/patches/112_cc-randr12-potfiles.patch, + debian/patches/113_cc-randr12-fix-clone-checkbox.patch, + debian/patches/113_cc-randr12-remove_g_prints.patch, + debian/patches/114_cc-randr12-handle_rw_screen_new_failure.patch, + debian/patches/115_cc-randr12-fix-rebuild-gui.patch, + debian/patches/116_cc-randr12-handle-screen-NULL-in-on_screen_changed.patch, + debian/patches/117_cc-randr12-disable-help-button.patch, + debian/patches/118_cc-randr12-translate-extra-strings.patch: + - new xrandr capplet + + -- Sebastien Bacher Fri, 06 Jun 2008 15:04:15 +0200 + +control-center (1:2.22.2.1-1) unstable; urgency=low + + [ Josselin Mouette ] + * Suggest gstreamer0.10-alsa | gstreamer0.10-audiosink. + Closes: #482794. + + [ Sebastian Dröge ] + * New upstream bugfix release: + + debian/patches/70_relibtoolize.patch: + - Updated to apply cleanly again. + + debian/rules: + - Run touch on every file to fix up timestamps. + + -- Sebastian Dröge Thu, 29 May 2008 10:32:54 +0200 + +control-center (1:2.22.1-1) unstable; urgency=low + + * New upstream bugfix release: + + debian/patches/70_relibtoolize.patch: + - Updated for the new version. + + -- Sebastian Dröge Wed, 16 Apr 2008 11:03:33 +0200 + +control-center (1:2.22.0-2) unstable; urgency=low + + * Upload to unstable. + * debian/control.in, + debian/gnome-control-center.install: + + Use nautilus 2.20 for now. + + -- Sebastian Dröge Wed, 19 Mar 2008 02:14:49 +0100 + +control-center (1:2.22.0-1) experimental; urgency=low + + * New upstream stable release: + + Upload to experimental first because of intrusive changes. + + gnome-settings-daemon moved to it's own source package. + + Update build dependencies and dependencies. + + -- Sebastian Dröge Sat, 15 Mar 2008 19:06:48 +0100 + +control-center (1:2.20.3-3) unstable; urgency=low + + [ Josselin Mouette ] + * Conflict against gnome-session << 2.20.3-2 because earlier versions + require the dbus service file. + + [ Sebastian Dröge ] + * debian/control.in: + + Build depend on libxklavier12-dev | libxklavier-dev and rebuild against + the new soname. + + -- Sebastian Dröge Thu, 28 Feb 2008 10:03:20 +0100 + +control-center (1:2.20.3-2) unstable; urgency=low + + * capplets-data.install: don’t install the dbus service file, as g-s-d + should not be started through dbus. + * gnome-keyboard-properties.1: + + Fix missing space. + + Fix whatis entry. + * gnome-control-center.dirs: removed. + * Don’t run dh_makeshlibs for g-c-c. + * Update menu entry to the latest menu layout. + + -- Josselin Mouette Sat, 16 Feb 2008 14:58:03 +0100 + +control-center (1:2.20.3-1) unstable; urgency=low + + * New upstream bugfix release. + * debian/control.in: + + Update Standards-Version to 3.7.3, no additional changes needed. + * debian/patches/70_relibtoolize.patch: + + Updated for the new version. + + -- Sebastian Dröge Sat, 12 Jan 2008 07:34:06 +0100 + +control-center (1:2.20.1-2) unstable; urgency=high + + [ Josselin Mouette ] + * 30_pkgconfig-path.patch: provide the path to the + gnome-settings-daemon binary in the pkgconfig file. + + [ Loic Minier ] + * Upload with urgency high as we need this minor change for next + gnome-session. + + -- Loic Minier Tue, 27 Nov 2007 13:57:27 +0100 + +control-center (1:2.20.1-1) unstable; urgency=low + + * New upstream bugfix release: + + debian/patches/70_relibtoolize.patch: + - Regenerated for the new version. + + -- Sebastian Dröge Thu, 25 Oct 2007 19:45:06 +0200 + +control-center (1:2.20.0.1-1) unstable; urgency=low + + [ Loic Minier ] + * gnome-settings-daemon is in /usr/lib/control-center, not + gnome-control-center; closes: #443997. + * Drop the version of the scrollkeeper dependency. + + [ Josselin Mouette ] + * Run dh_installmime for capplets-data, otherwise cdbs runs it before + dh_install. + + [ Sven Arvidsson ] + * Add man page for gnome-keyboard-properties (Closes: #345818) + + [ Sebastian Dröge ] + * New upstream bugfix release: + + debian/patches/70_relibtoolize.patch: + - Updated for the new version. + + -- Sebastian Dröge Fri, 05 Oct 2007 08:45:45 +0200 + +control-center (1:2.20.0-1) unstable; urgency=low + + [ Loic Minier ] + * Bump up gnome-icon-theme dep to >= 2.16 for applications-internet etc. + * Bump up libpango1.0-dev b-dep to >= 1.17 to help experimental's sbuild to + install libgtk2.0-dev >= 2.11. + + [ Sebastian Dröge ] + * New upstream release: + + debian/patches/27_nobashizms.patch: + - Dropped, merged upstream. + + 70_relibtoolize.patch: + - Updated for the new version. + * Upload to unstable, drop check-dist include. + + -- Sebastian Dröge Sat, 22 Sep 2007 11:06:14 +0200 + +control-center (1:2.19.6-1) experimental; urgency=low + + * New upstream development release; no API change. + - Bump up libgtk2.0-dev build-dep to >= 2.11.6. + - Relibtoolize. + - Drop 99_ltmain_as-needed; fails to apply and not easy to update for me. + + -- Loic Minier Fri, 03 Aug 2007 10:28:44 +0200 + +control-center (1:2.19.5-2) experimental; urgency=low + + * Update defaults to string type by explicitely quoting them; + closes: #432933. + + -- Loic Minier Fri, 13 Jul 2007 11:14:52 +0200 + +control-center (1:2.19.5-1) experimental; urgency=low + + [ Josselin Mouette ] + * capplets-data.gconf-defaults: set the default keybindings, formerly + in patches/07_default_keys.patch. + * patches/07_default_keys.patch: removed. + * 99_ltmain_as-needed.patch: get --as-needed back to work. + + [ Loic Minier ] + * Drop DEB_CONFIGURE_LOCALSTATEDIR which seems to be useless since forever. + * Drop Marc Dequènes (Duck) from Uploaders; thanks! + * Cleanups. + * New upstream release series; these are development releases, the API may + still change incompatibly; no API change in this release though. + - Target at experimental; include check-dist. + - Set GNOME_MODULE and update watch and copyright files as the upstream + module was renamed to gnome-control-center; update debian/*.install and + *.links files for new pathnames. + - Update patch 01_fix_libslab_build. + - Update patch 02_xrdb to only patch + gnome-settings-daemon/gnome-settings-xrdb.c (same as Ubuntu package). + - Update patch 09_locate_pointer (from Ubuntu package). + - Drop patch 10_eggaccelerators, merged upstream. + - Drop patch 15_gconf_peditor which has no documentation and seems + completely obsolete. + - Update patch 19_extra_keybindings (from the Ubuntu package). + - Drop patch 24_theme_dont_require_metacity, deprecated with the new + version (from the Ubuntu package). + - Drop patch 36-compiz-keybindings-support, deprecated with the new + version (from the Ubuntu package). + - Update relibtoolizing patch, 70_relibtoolize. + - Drop patch 90_workaround_gnome_doc_utils_bug, workaround not required + anymore. + - Bump up libglib2.0-dev build-dep to >> 2.13. + - Drop private icon dir and png pixmaps from capplets-data.install. + - Drop gnome-font-properties, gnome-background-properties, + gnome-theme-manager, and gnome-ui-properties from + gnome-control-center.install. + - Add a (libxklavier11-dev >= 3.2) build-dep. + - Update GConf defaults for the music and calculator keybindings and bind + the rhythmbox command to the default media player. + - Install gnome-keybindings.pc in libgnome-settings-daemon-dev. + - Misc updates to *.install files. + - New patch, 27_nobashizms, fixes a bashism in gnome-at-commandline; found + in the Ubuntu package. + - Install all files under usr/bin to gnome-control-center to ease handling + of its install file. + + -- Loic Minier Tue, 10 Jul 2007 18:55:45 +0200 + +control-center (1:2.18.1-1) unstable; urgency=low + + [ Marco Cabizza ] + * New upstream release: + - gswitchit should be working as most of the keyboard-releated stuff + has been moved to libgnomekbd ( therefore depending on it ). + - dropping 12_sort_entries.patch, 22_bkg_capplet_follow_symlink.patch, + and 23_menu_files_conflict.patch due to code reorganisation. + - dropping 28_thunderbird-no-compose-flag.patch and + 29_iceweasel-icedove-preferred-apps.patch as they're merged upstream. + - fixing 02_xrdb.patch for the new upstream. + - don't create the libslab* packages, depend on gnome-main-menu's + libslab-dev. + - don't install the control-center schema as it's provided by slab. + * Fixing the .install files. + + [ Riccardo Setti ] + * Built with the libslab-dev package provided by gnome-main-menu + instead of the libslab shipped in the source + - 01_fix_libslab_build.patch + * Removed 06_disable_update_mime_at_install.patch. Use + --disable-update-mimedb directly from the configure switch. + * Updated 04_path_xtra.patch, 02_xrdb.patch + * Added 05_autotools.patch + * Dropped 30_pulseaudio.patch, merged upstream. + * Added 07_default_keys.patch (patch taken from the ubuntu package) + * Added 91_from_svn_fix_gstreamer_warning.patch: + patch from SVN, "Initialise threads early, and fix option context + translation". (patch taken from the ubuntu package) + + [ Loic Minier ] + * Drop commented out DEB_BUILDDIR completely; seems useless; cleanups. + * Set LDFLAGS directly instead of via DEB_CONFIGURE_SCRIPT_ENV; build-dep on + cdbs >= 0.4.41. + * New upstream release has API additions in gnome-settings-client.h, bump up + shlibs to >= 2.17.5. + * Suggest xrdb. + * Bump up intltool build-dep to 0.35.5. + * Build-depend on libpango1.0-dev, libgnomekbdui-dev. + * Drop build-dep on liborbit2-dev, libxklavier11-dev. + * Bump up dep on gnome-menus to >= 2.12.0. + * Version the libgnomekbd and libgnomekbdui build-deps to >= 0.1. + * New upstream release; no API change in libgnome-window-settings. + - Apply update to patch 07_default_keys, found in the Ubuntu package. + - Drop patch 91_from_svn_fix_gstreamer_warning, merged upstream. + - Rename patch 05_autotools to 70_relibtoolize and update it. + - New patch, 90_workaround_gnome_doc_utils_bug, works around a build + failure with newer gnome-doc-utils; from the Ubuntu package. + * New patch, 36-compiz-keybindings-support, permits configuring keybindings + when using compiz as window manager; from the Ubuntu package. + * Upload to unstable; drop check-dist include. + * Wrap build-deps and deps. + * Fix URL in copyright. + * Build-depend on scrollkeeper. + + -- Loic Minier Sun, 22 Apr 2007 13:48:12 +0200 + +control-center (1:2.16.3-1) experimental; urgency=low + + [ Sven Arvidsson ] + * New patch, 30_pulseaudio.patch, Polypaudio is now PulseAudio; + thanks Mike Hommey. + + [ Loic Minier ] + * Merge 1:2.14.2-6 and 1:2.14.2-7; SVN r7995:8671. + * New upstream stable release; bug fixes and translations. + - Update patch 25_window_manager_settings. + - Drop patch 30_null-terminate-font-list, merged upstream. + - Update patch 30_pulseaudio. + - Build-depend on scrollkeeper. + + -- Loic Minier Sat, 17 Mar 2007 15:49:26 +0100 + +control-center (1:2.16.2-3) experimental; urgency=low + + * Add a get-orig-source target to retrieve the upstream tarball. + * Include the new check-dist Makefile to prevent accidental uploads to + unstable; bump build-dep on gnome-pkg-tools to >= 0.10. + * Build-depend on libgtk2.0-dev >= 2.10 for multihead support and to build + typing-break which uses GtkStatusIcon, par of the 2.10 API. + * Bump up libgnomeui-dev build-dep to >= 2.16.0-2 to get a Gtk 2.10 + transitionned version. + + -- Loic Minier Sun, 4 Feb 2007 13:22:54 +0100 + +control-center (1:2.16.2-2) experimental; urgency=low + + * Conflict with gnome-session < 2.16. + + -- Josselin Mouette Mon, 27 Nov 2006 20:55:48 +0100 + +control-center (1:2.16.2-1) experimental; urgency=low + + [ Marco Cabizza ] + * New upstream release: + - gnome-settings-daemon doesn't crash anymore, hooray! (Closes: #372873) + - dropping merged patches 26_ignore_pmu_permissions.patch and 27_bzip2.patch + - adapting 19_extra_keybindings.patch + * Bumping dependencies: libgtk2.0-dev, libxklavier11-dev, libebook-dev + * Build-Depends on hal and dbus + * Splitting off some stuff (gnome-window-settings.pc and its headers) into + libgnome-window-settings-dev, and thus including the dbus .service in + capplets-data + * Updated the watch file + + [ Loic Minier ] + * Fix watch file to track stable releases and use HTTP. + + [ Josselin Mouette ] + * Merge 2.14.2-5. + * rules: call clean-la.mk. + * Build-depend on gnome-pkg-tools 0.7. + * 29_iceweasel-icedove-preferred-apps.patch: remove the tons of + useless translations of iceweasel and icedove by themselves. + + -- Josselin Mouette Sun, 26 Nov 2006 21:38:20 +0100 + +control-center (1:2.14.2-7) unstable; urgency=medium + + * Add a get-orig-source target to retrieve the upstream tarball. + * New patch, 30_null-terminate-font-list, fixes crash triggerred by missing + NULL terminator in name list; GNOME #356435. + + -- Loic Minier Mon, 26 Feb 2007 11:00:38 +0100 + +control-center (1:2.14.2-6) unstable; urgency=low + + * Update patch 29_iceweasel-icedove-preferred-apps to drop the -compose + flag, as in 28_thunderbird-no-compose-flag. + + -- Loic Minier Mon, 27 Nov 2006 16:52:30 +0100 + +control-center (1:2.14.2-5) unstable; urgency=low + + * Update patch 29_iceweasel-icedove-preferred-apps to change the mixed case + IceWeasel in Iceweasel. + + -- Loic Minier Sat, 25 Nov 2006 13:34:41 +0100 + +control-center (1:2.14.2-4) unstable; urgency=low + + * New patch, 29_iceweasel-icedove-preferred-apps, to offer IceWeasel and + Icedove in the list of preferred applications; thanks Sven Arvidsson; + closes: #393549. + + -- Loic Minier Sat, 25 Nov 2006 11:41:26 +0100 + +control-center (1:2.14.2-3) unstable; urgency=low + + [ Loic Minier ] + * New patch, 28_thunderbird-no-compose-flag, to fix the way browsers invoke + Thunderbird (drop the -compose flag which is added automatically for + mailto: URLs); thanks Manuel Bilderbeek. (Closes: #380284) + * Recommend gnome-user-guide instead of gnome2-user-guide; thanks Luk Claes. + (Closes: #378718) + + [ Marco Cabizza ] + * Set the correct path for bzip2 adding patches/27_bzip2.patch, and + Recommends: bzip2, (Closes: #378141) + + [ Josselin Mouette ] + * Suggest gnome-screensaver first, xscreensaver second. + * Make libgnome-window-settings-dev tolerate binNMUs. + * Depend on gnome-pkg-tools 0.6. + * Use ${gnome:Version} and ${gnome:NextVersion}. + * Call gnome-version.mk in rules. + + -- Josselin Mouette Fri, 1 Sep 2006 21:24:32 +0200 + +control-center (1:2.14.2-2) unstable; urgency=high + + [ Marco Cabizza ] + * debian/control, debian/control.in: + - libgnome-window-settings1 replaces capplets (Closes: #372804) + + [ Sjoerd Simons ] + * debian/patches/26_ignore_pmu_permissions.patch + - Added. Ignore errors when we can't open or use the pmu device for + brightness settings. A better fix would be to use hal instead. + (Closes: #373146) + + [ Loic Minier ] + * Fix versioned dependency of capplets-data on gnome-control-center. + * Let libgnome-window-settings1 conflict with capplets too. + * Drop capplets Provides. + + -- Loic Minier Fri, 7 Jul 2006 22:28:58 +0200 + +control-center (1:2.14.2-1) unstable; urgency=low + + * New upstream release + * debian/control, debian/control.in: + - libgnome-window-settings1, libgnome-window-settings-dev Replaces + gnome-control-center << 1:2.14.0-1 (Closes: #370211) + - New maintainer + * compat, libgnome-window-settings1.install, gnome-control-center.install: + - Debhelper compatibility is 5 + - Fixed some missing files errors + + -- Marco Cabizza Sun, 28 May 2006 18:53:48 +0200 + +control-center (1:2.14.1-1) unstable; urgency=low + + [ Marco Cabizza ] + * New upstream release. + - fixed the xkb releated bugs (Closes: #348809, #349399, #351798) + - evdev doesn't crash gnome-settings-daemon any more + (Closes: #362107, #362563) + - fixed the gnome-settings-daemon crash at startup (Closes: #347796) + * debian/control, debian/control.in: + - dropped the dependency on xlibs due to its deprecation and since + libxklavier depends on xkb-data (Closes: 342536, #365977) + - standards version is 3.7.2 + - Build-depend on libgtk2.0-dev (>= 2.8.12) and + libgstreamer-plugins-base0.10-dev + * debian/rules: + - append --enable-gstreamer=0.10 to configure + * debian/capplets-data.install: + - added usr/share/desktop-directories to the list + * debian/patches/02_xrdb.patch: + - updated to fit upstream + * debian/patches/08_pmu_fix.patch: + - dropped; already merged upstream + * New packages: + - Move libgnome-window-settings.so.1 in the newly created + libgnome-window-settings1 and add libgnome-window-settings1.shlibs + - Move the libwindow-settings' header files in the newly created + libgnome-window-settings-dev + * debian/patches/25_window_manager_settings.patch: + - rename /usr/lib/window-manager-settings to + /usr/lib/libgnome-window-settings1. + + [ Josselin Mouette ] + * Make the package binNMU-safe. + + Build-depend on dpkg-dev 1.13.19. + + Use ${source:Version}. + + -- Marco Cabizza Sat, 6 May 2006 17:01:39 +0200 + +control-center (1:2.12.3-2) unstable; urgency=medium + + * Build-depend on libxrender-dev, libx11-dev, and libxt-dev explicitely as + these are used in configure.in, fixes FTBFS. + [debian/control, debian/control.in] + * Add missing build-deps on libgconf2-dev, libbonoboui2-dev, libesd0-dev, + libgnomevfs2-dev, libfontconfig1-dev, libfreetype6-dev, libglib2.0-dev. + [debian/control, debian/control.in] + * Fix old changelog entries: + - Fix the bug number closed in 1:2.12.1-2. + - Explain Marillat's joke in 1:2.4.0-8. (Closes: #244288) + + -- Loic Minier Tue, 21 Feb 2006 11:38:12 +0100 + +control-center (1:2.12.3-1) unstable; urgency=low + + * New upstream release. + * Recommend evolution-data-server since gnome-about-me seems to require it. + (Closes: #340419) + [debian/control, debian/control.in] + + -- Loic Minier Mon, 20 Feb 2006 18:27:00 +0100 + +control-center (1:2.12.2-2) unstable; urgency=low + + [ Gustavo Noronha Silva ] + * debian/control.in: + - increased debhelper b-dep to >= 4.1.0, because of cdbs + + [ Josselin Mouette ] + * Rebuild to get rid of libgamin0 dependency (closes: #348347). + + -- Josselin Mouette Mon, 16 Jan 2006 20:47:30 +0100 + +control-center (1:2.12.2-1) unstable; urgency=low + + * New upstream release + * debian/control.in: + - removed duplicated build-dep on libgnome-menu-dev, leaving + the bigger one (>= 2.12), thanks to Kurt Roeckx + for pointing out + + -- Gustavo Noronha Silva Sun, 8 Jan 2006 12:02:37 -0200 + +control-center (1:2.12.1-2) UNRELEASED; urgency=low + + * Only install /usr/share/applications/*.desktop, not + /usr/share/applications in capplets-data, and rm -rf + /usr/share/applications/mimeinfo.cache in + binary-post-install/capplets-data:: to be completely safe (the + update-desktop-database can't be deactivated via configure). + (Closes: #346062) + [debian/capplets-data.install, debian/rules] + + -- Loic Minier Sat, 7 Jan 2006 15:30:16 +0100 + +control-center (1:2.12.1-1) experimental; urgency=low + + [ Loic Minier ] + * New upstream releases. + - Update watch file. [debian/watch] + - Don't run scrollkeeper. [debian/rules] + - Bump libgtk2.0-dev build-dep to >= 2.6.0. + [debian/control, debian/control.in] + - Add a libxft-dev build-dep on >= 2.1.2. + [debian/control, debian/control.in] + - Version libgnome-menu-dev build-dep on >= 2.10.1. + [debian/control, debian/control.in] + - Enable about-me capplet. + . Update configure flags. [debian/rules] + . Add libebook1.2-dev build-dep. [debian/control, debian/control.in] + - Suggest gnome-screensaver. [debian/control, debian/control.in] + * Add CDBS' utils. [debian/rules] + * Don't overwrite DEB_CONFIGURE_EXTRA_FLAGS and + DEB_INSTALL_MANPAGES_gnome-control-center. [debian/rules] + + [ Sjoerd Simons ] + * debian/patches/12_sort_entries.patch + - Updated for new upstream + * debian/patches/20_gswitchit_dont_crash_when_no_xkb_config.patch + - Removed. fixed upstream + * debian/patches/22_bkg_capplet_follow_symlink.patch + - Updated for new upstream (from the ubuntu package) + * debian/patches/23_menu_files_conflict.patch + - Update for new upstream + * debian/patches/99_reautogenization.patch + - Removed + * Updated build-depends + * Install gnome-about-me and the nautilus extensions + * Use upstream versions of gnome-font-viewer.desktop and + themus-theme-applier.desktop + + -- Sjoerd Simons Mon, 21 Nov 2005 18:21:32 +0000 + +control-center (1:2.10.2-1) unstable; urgency=low + + [ Josselin Mouette ] + * Use again --as-needed. + + [ Marc Dequènes (Duck) ] + * New upstream release. + * Applied patch for gnome-font-viewer 'fonts:///' url capability from + Sam Morris (Closes: #316188). + * Fixed 'Apply theme' contextual entry in 'themes://' (corrected + 'debian/themus-theme-applier.desktop') (Closes #298360). + * Regenerated and merged reautogenization patches. + + -- Marc Dequènes (Duck) Fri, 30 Sep 2005 15:08:27 +0200 + +control-center (1:2.10.1-6) unstable; urgency=medium + + * Urgency medium because of FTBFS on sparc and alpha (binutils issue). + * Remove --as-needed from LD_FLAGS. + + -- Loic Minier Wed, 10 Aug 2005 12:48:11 +0200 + +control-center (1:2.10.1-5) unstable; urgency=high + + * Urgency high because of RC bugfix and because this holds the GNOME 2.10 + transition. + * Add missing build-deps on libxss-dev (Closes: #319971) and + libxinerama-dev. + + -- Loic Minier Tue, 26 Jul 2005 09:52:43 +0200 + +control-center (1:2.10.1-4) unstable; urgency=medium + + * Don't overwrite DEB_CONFIGURE_SCRIPT_ENV completely. + * 24_theme_dont_require_metacity.patch: make gnome-theme-manager work + without metacity being installed (closes: #315730). + * Use type-handling's Provides: feature to avoid hacking the control file. + * Remove the capplets package, which doesn't have a purpose anymore. Move + all package contents back to gnome-control-center. + * Remove most Replaces: and Conflicts:, not useful anymore. + * Standards-version is 3.6.2. + + -- Josselin Mouette Sat, 25 Jun 2005 19:11:37 +0200 + +control-center (1:2.10.1-3) unstable; urgency=low + + * Fix menu files conflict (renaming 'preferences.menu' to 'gnome- + preferences.menu') (causing control-center summary window to be + empty). + * Now building in 'debian/build/' directory (cleaner & avoid non- + idempotency hackerie). + * Updated 'debian/copyright' download URL. + * 'debian/rules' spring-cleaning. + + -- Marc Dequènes (Duck) Wed, 15 Jun 2005 00:47:05 +0200 + +control-center (1:2.10.1-2) unstable; urgency=low + + * Upload to unstable (GNOME Team upload) (Closes: #313217). + * Fixed in 2.10 : + + crashes at startup when loading settings (Closes: #251126). + + installing files from ~/.themes fails (Closes: #166983). + + bad icon themes install path (Closes: #257241). + + installing bad theme fails silently (Closes: #166982). + + incorrect position of volume dialog (Closes: #260277). + + cannot turn off sound events (Closes: #216927). + and probably some more... + * Buildsys not idempotent breaking next build because of missing + schema '.in' file worked around in clean rule (GNOME people should + really learn to test before releasing...). + + -- Marc Dequènes (Duck) Sun, 12 Jun 2005 19:43:28 +0200 + +control-center (1:2.10.1-1) experimental; urgency=low + + * New upstream release. + * debian/control.in: + - Updated build-dependencies + * debian/patches: + - 01_gnome-default-applications-properties-structs.c.patch: Removed as + Debian's default applications are included upstream + - 03_gsd_actions_makefile.am.patch: Not more needed + - 05_path_xtra-2.patch: Regenerated + - 06_disable_update_mime_at_install.patch: + - 07_disable_update_mime_at_install-2.patch: + Don't call update-desktop-database + - 11_sleepkey.patch: patch taken to seb128's package to use gdm-signal + - 12_sort_entries.patch: Sort entries in each categories + when suspending from keyboard key + - 21_show_xkb_warning_one_time.patch: should not be needed anymore + - 21_show_xkb_warning_one_time.patch: updated + - 17_locate_pointer.patch: + - 23_infinite_loop_theme_manager.patch: + This upstream version has theses patches + + -- Arnaud Patard Sat, 9 Apr 2005 01:00:12 +0200 + +control-center (1:2.8.2-3) unstable; urgency=medium + + * 20_gswitchit_dont_crash_when_no_xkb_config.patch: + + Reverse a wrong test condition. + + Don't check the "options" key (closes: #296434). + + -- Josselin Mouette Thu, 17 Mar 2005 22:28:32 +0100 + +control-center (1:2.8.2-2) unstable; urgency=low + + * debian/control: + - fixes the Build-Depends (Closes: #299753). + + -- Sebastien Bacher Wed, 16 Mar 2005 23:29:27 +0100 + +control-center (1:2.8.2-1) unstable; urgency=low + + * New upstream version: + - Fix theme thumbnailing + - Fix widget expansion in the keyboard preferences + - Handle backspace in multilayout setups correctly + - theme-thumbnailer doesn't require an absolute path + * debian/patches: + - 05_relibtoolised.patch : Removed as no more accurate + - 06_gst-fix.patch: Merged + - 14_gst-mixer-grab.patch : Merged + - 16_disable_text_editor_tab.patch: Merged + - 18_logout.patch: Merged + - 04_path_xtra.patch: Updated to patch only the configure.in file. The + configure update is now in 05_path_xtra.patch-2.patch + - 23_infinite_loop_theme_manager.patch: Forgotten patch in the 2.8.2 + release + * debian/rules: + - Pass --as-needed to LDFLAGS to reduce dependencies and removes + dependency upon libhowl0. (Closes: 298805) + * debian/control.in: + - Depends on libgnomeui >= 2.8.1-3 to be sure to remove the dependency on + the libhowl0 + + -- Arnaud Patard Wed, 9 Mar 2005 23:18:44 +0100 + +control-center (1:2.8.1-4) unstable; urgency=low + + * debian/patches: + - 17_locate_pointer.patch: fix the "locate pointer" when numlock is + activated. + - 18_logout.patch: fix the logout shortcut (Closes: #289009). + - 01_gnome-default-applications-properties-structs.c.patch: Corrected + Thunderbird command (Closes: #278762) + - Updated 08_pmu_fix.patch with patches from Sjoerd Simons and Sven Luther + as a fix for the pmu error message + - 19_extra_keybindings.patch: Add bindings for calculator and music + multimedia keys (Closes: #291917) + - 20_gswitchit_dont_crash_when_no_xkb_config.patch: Patch from kov to + prevent crash when used remotely (Closes: #286220) + - 21_show_xkb_warning_one_time.patch: Adopt a similar behaviour as for the + xmodmap warning (Closes: #287965) + - 22_bkg_capplet_follow_symlink.patch: Resolv symlink to generate the + thumbnails (Closes: #281657) + + -- Arnaud Patard Sun, 6 Feb 2005 19:13:04 +0100 + +control-center (1:2.8.1-3) unstable; urgency=low + + * debian/rules: + - Corrected erroneous line responsible for not including the .desktop + files (Closes: #274401) + * debian/patches: + - Suppressed 'Text Editor' in the "preferred applications" as it's useless + with the new mime type system. + + -- Arnaud Patard Thu, 25 Nov 2004 21:16:04 +0100 + +control-center (1:2.8.1-2) unstable; urgency=low + + * debian/rules,debian/capplets.install: + - Added manually a .desktop for fontilus taken from Gnome's cvs + (Closes: #274401) + - Added manually a .desktop for themes:///. Thanks to Dan Korostelev + + -- Arnaud Patard Wed, 17 Nov 2004 23:44:21 +0100 + +control-center (1:2.8.1-1) experimental; urgency=low + + * New upstream release + - Some tweaking of the available default applications + - Background capplet fixes + - keyboard patchs + - Patch leak in XKB code + - update translations + * Update the package with the modifications from the 2.6 package + * Added Evolution 2.0 to preferred applications (Closes: 279198) + * debian/patches: + - Removed 13_drw_monitor.patch + - Re-added an updated version of 14_gst-mixer-grab.patch as the bug + isn't fixed upstream + + -- Arnaud Patard Tue, 9 Nov 2004 00:24:23 +0100 + +control-center (1:2.8.0-1) experimental; urgency=low + + * GNOME Team Upload with Rtp's permission. + * New upstream release : + + fix french typo (Closes: #238387) (or even closed in 2.6). + + fix german typo (Closes: #267767) + * Removed 07_acme_position.patch and 11_default_app.patch now + applied upstream. + * Removed part of the 12_custom_browser.patch related to the dead + file-types capplet (due to mime system changes). + * Corrected 'patch unexpectedly ends in middle of line' in + 13_drw_monitor.patch. + * Removed 14_gst-mixer-grab.patch recoded upstream. + * Updated URL in 'debian/copyright'. + * Updated watch file. + * 'debian/control.in' : using ${misc:Depends} and updated versions. + * Added 'autotools-dev' to build dependencies to take advantage of the + CDBS automatic 'config.*' management. + * Regenerated relibtoolize patch. + * As not (yet) DD i'm not listed as GNOME Team member, so adding + myself to Uploaders to avoid this upload to be considered a NMU. + + -- Marc Dequènes (Duck) Wed, 15 Sep 2004 04:20:24 +0200 + +control-center (1:2.6.1-13) unstable; urgency=low + + * debian/patches: + - Added a sanity check on the type of gconf value before calling strcmp in + gconf_property_editor (Closes: #272358) + - Check that one is on a powerpc with a pmu before reporting that's + there is no /dev/pmu in 08_pmu_fix.patch (Closes: #273336) + - Updated 01_gnome-default-applications-properties-structs.c.patch to add + FireFox and ThunderBird (Closes: #265882) + - Added a check on self->priv in 14_gst-mixer-grab.patch in order to + provent a crash if something went wrong during initialiastion + (Closes: #269429) + - Updated 09_locate_pointer.patch XUngrabKeyboard call thanks to Sjoerd + Simons (Closes: #275723) + * debian/control{,.in},debian/rules: + - Patch from Robert Millan to build on kfreebsd-gnu (Closes: #272722) + + -- Arnaud Patard Tue, 12 Oct 2004 13:49:27 +0200 + +control-center (1:2.6.1-12) unstable; urgency=low + + * debian/patches: + - Corrected patch 11_default_app.patch so that it checks the pointer value + before calling strlen (Closes: #264288) + - Added a patch that close the mixer devices after 4s of inactivity + (Closes: #255793) + + -- Arnaud Patard Fri, 13 Aug 2004 12:47:09 +0200 + +control-center (1:2.6.1-11) unstable; urgency=low + + * debian/patches: + - Added a patch for fixing the default applications properties capplet + (Closes: #245237) + - Added a patch from http://bugzilla.gnome.org/show_bug.cgi?id=123487 for + handling http,https, unknow urls with the custom browser setting + (Closes: #236297) + - Backported a patch from control-center 2.7 for preventing the typing + break to starts while watching a movie with totem + * debian/control.in: + - Updated the libgnomeui-dev build-depends to get gnutls11 + (Closes: #263609) + + -- Arnaud Patard Thu, 5 Aug 2004 17:46:37 +0200 + +control-center (1:2.6.1-10) unstable; urgency=low + + * debian/patch + - Added a patch so that using the 'locate cursor' mouse option doesn't + disable all multimedia keybinding (Closes: #257581) + - Corrected the patch for the pmu by suppressing the wrong test, as + discussed with upstream (Closes: #258105) + - Added a patch from http://bugzilla.gnome.org/show_bug.cgi?id=145271 to + ensure that all keysims in shortcuts exists in the keymap (Closes: 254745) + * debian + - Corrected some errors in the man page. + + -- Arnaud Patard Mon, 12 Jul 2004 23:32:27 +0200 + +control-center (1:2.6.1-9) unstable; urgency=low + + * debian/patch: + - Corrected the patch so that all modified files are in the diff + (Closes: #257352) + - Modified 06_gst-fix.patch to ensure the usage of the first soundcard on + system with multiple soundcards + + -- Arnaud Patard Sat, 3 Jul 2004 12:50:18 +0200 + +control-center (1:2.6.1-8) unstable; urgency=low + + * debian/capplets-data.install: + - Suppressed the line that was reponsible for copying Xresources two times + (Closes: #252324). + * debian/control.in: + - Added libgstreamer-plugins0.8-dev to build-depends + - Added some gstreamer sound plugin for the volume keybindings + * debian/patch: + - Added a patch from Sjoerd Simons to fix the gstreamer volume code + (Closes: #251831,#253416) + - Added a patch for setting the position of the volume window after + showing it (Closes: #254822) + - Added a patch for cleaning error messages for /dev/pmu from + http://bugzilla.gnome.org/show_bug.cgi?id=132655. It will be merged + in 2.7 (Closes: #252460) + + -- Arnaud Patard Thu, 1 Jul 2004 22:16:30 +0200 + +control-center (1:2.6.1-7) unstable; urgency=high + + * debian/control.in: + + removed libgstreamer-plugins0.8-dev from Build-Depends. + + -- Sebastien Bacher Sat, 19 Jun 2004 15:10:37 +0200 + +control-center (1:2.6.1-6) unstable; urgency=high + + * Rebuilt without gstreamer to try to get control-center in testing fast + to fix nautilus' breakage. + + -- Sebastien Bacher Fri, 18 Jun 2004 01:26:12 +0200 + +control-center (1:2.6.1-5) unstable; urgency=low + + * Rebuilt in a pbuilder, fix the crashe due to linkage with both libxft + (Closes: #254076). + + -- Sebastien Bacher Sat, 12 Jun 2004 23:22:42 +0200 + +control-center (1:2.6.1-4) unstable; urgency=low + + * Gnome Team Upload. + * Added a link to the gnome-settings-daemon in /usr/bin (Closes: #251953). + * debian/control.in: + + Depends on xlibs (Closes: #253287). + + Recommends gnome2-user-guide (Closes: #251992). + + -- Sebastien Bacher Thu, 10 Jun 2004 22:28:02 +0200 + +control-center (1:2.6.1-3) unstable; urgency=low + + * debian/rules : + - As gstreamer 0.8 as reached unstable, reactivate the default option to use + it with the keybindings. + * debian/control.in : + - Added build dependency on libgstreamer-plugins0.8-dev + - Removes dependency on libgnome-keyring-dev since no more needed. + - Added libXrandr-dev as build dependency (Closes: #251429). + * debian/patch : + - Added a patch for resolving conflictings ALSA_CFLAGS problems (Closes: + #249357). + - Added a pathc for using Debian's ac_path_xtra + - Modified the patch for relibtoolizing + + -- Arnaud Patard Sat, 29 May 2004 18:01:45 +0200 + +control-center (1:2.6.1-2) unstable; urgency=low + + * GNOME Team Upload. + * Upload in unstable. + + -- Sebastien Bacher Wed, 26 May 2004 17:30:32 +0200 + +control-center (1:2.6.1-1) experimental; urgency=low + + * New upstream release. + - Fix uniqueness test for binding special keys with no name + - Fix theme manager selection when not running metacity + - Match nautilus' interpretation of icons in desktop files + - Add Evolution 1.5 and 1.6 to "Preferred Applications" (Closes: #243973). + * debian/patches: + - Removes patch for keyboards + - Updates patch for libtool + * debian.control: + - Added a dependency on gconf2 for capplets-data (Closes: #243894). + + -- Arnaud Patard Fri, 16 Apr 2004 12:50:54 +0200 + +control-center (1:2.6.0.3-2) experimental; urgency=low + + * debian/patch: + - Added a patch from gnome cvs for fixing issues with multimedia + keybindings (see http://bugs.gnome.org/show_bug.cgi?id=139190). + - Added a patch to regenerate libtool files. + + -- Arnaud Patard Wed, 7 Apr 2004 01:44:10 +0200 + +control-center (1:2.6.0.3-1) experimental; urgency=low + + * New upstream release + - Fix some keyboard problems + (see http://bugzilla.gnome.org/show_bug.cgi?id=138701). + * control.in: + - Added versionning informations on depend for capplets (needed to ensure + having right version of capplets when upgrapding). + + -- Arnaud Patard Sun, 4 Apr 2004 15:39:57 +0200 + +control-center (1:2.6.0.2-1) experimental; urgency=low + + * New Upstream release. + + Disabled GStreamer (as it now depends on it by default and the package + is not yet upgraded) + * control.in: + + Updated dependencies to libnautilus2 2.6.0. + + Added a conflict on acme, since it's now a part of control-center + + Changed the build dependency on libxrender-dev to libxcursor-dev + (Closes #240483) + + -- Arnaud Patard Thu, 1 Apr 2004 00:09:52 +0200 + +control-center (1:2.5.4-1) experimental; urgency=low + + * New maintainer (Closes: #238876) + * New upstream release + - fix implicitly conversion (Closes: #226554). + - support icon themes now (Closes: #215851). + * debian/control.in, debian/rules: + - now, it uses cdbs. + - adapted for the gnome team packaging. + * Modified patch 01_gnome-default-applications-properties-structs.c.patch to + fit with new version. + + -- Arnaud Patard Thu, 25 Mar 2004 00:07:35 +0100 + +control-center (1:2.4.0-9) unstable; urgency=low + + * Debian/control set Maintainer to Debian QA Group + + -- Christian Marillat Sat, 20 Mar 2004 09:34:15 +0100 + +control-center (1:2.4.0-8) unstable; urgency=low + + * You need + * Notes by Loic Minier : the above changelog message was + meant to be some sort of joke, a message split between many source + packages. No actual change besides orphaning was done in this version. + You can read the full story at: + + + -- Christian Marillat Fri, 19 Mar 2004 15:08:21 +0100 + +control-center (1:2.4.0-7) unstable; urgency=low + + * debian/control capplets package need to depends on capplets-data (Closes: #237311) + + -- Christian Marillat Thu, 11 Mar 2004 09:07:06 +0100 + +control-center (1:2.4.0-6) unstable; urgency=low + + * Split the package. The gnome-control-center binary like nautilus is + simply a front-end for capplets, thus move all capplets in a separate + package (capplets) and add a dependency to 'gnome-control-center | + nautilus | gnome-panel' for that package. Also move data files in + capplets-data package. + * Remove /usr/lib/libgnome-window-settings.{a,la,so}, + gnome-window-settings-2.0.pc and include files. These files are not + needed and should not be packaged (Closes: #221283) + + -- Christian Marillat Sun, 29 Feb 2004 17:40:37 +0100 + +control-center (1:2.4.0-5) unstable; urgency=low + + * debian/prerm Unregister schemas file from the database. + * Patch from bugzilla to fix "symlink" in fontilus (Closes: #231639) + + -- Christian Marillat Thu, 12 Feb 2004 14:35:46 +0100 + +control-center (1:2.4.0-4) unstable; urgency=low + + * Move Xresources files in /etc/gnome/config and disable all resources. + + -- Christian Marillat Mon, 27 Oct 2003 15:51:37 +0100 + +control-center (1:2.4.0-3) unstable; urgency=low + + * Update gnome-desktop-data version in Replaces field (Closes: #217284) + + -- Christian Marillat Fri, 24 Oct 2003 18:56:02 +0200 + +control-center (1:2.4.0-2) unstable; urgency=low + + * Suggest xbase-clients for xrdb + * Rebuild to remove liblinc dependency in the -dev package (Closes: #216722) + * Don't package .la files for modules (Closes: #182873) + * Run libtoolize, I don't know but something is broken in the original tarball. + + -- Christian Marillat Tue, 21 Oct 2003 21:56:55 +0200 + +control-center (1:2.4.0-1) unstable; urgency=low + + * New upstream release. + * Conflicts with drwright and fontilus. + * Need to Build-Depends on libnautilus2-dev + * Add gok and gnopernicus in suggests + + -- Christian Marillat Sat, 18 Oct 2003 16:54:45 +0200 + +control-center (1:2.2.2-3) unstable; urgency=low + + * debian/control Should suggests xscreensaver (Closes: #212737) + + -- Christian Marillat Fri, 26 Sep 2003 14:39:18 +0200 + +control-center (1:2.2.2-2) unstable; urgency=low + + * debian/rules fix DEB_BUILD_OPTIONS=noopt (Closes: #199189) + * Don't need to depends on xbase-clients + * Suggests esound-clients (Closes: #205700) + * Create /usr/share/themes/metacity-1 directory to remove warning (Closes: #211182) + * Add hack to remove libtool rpath + * Add libxrender-dev in Builde-Depends + + -- Christian Marillat Sun, 21 Sep 2003 10:17:00 +0200 + +control-center (1:2.2.2-1) unstable; urgency=low + + * New upstream release. + * New patches : + * 02_network-preferences + fix range of proxy port (Closes: #195644) + * 01_gnome-default-applications-properties-structs.c: + add epiphany in ww-browser list (Closes: #192241) + * Add icon for Debian menu + * Fix linkage bug (Closes: #187368) + * debian/control Remove Suggests: xscreensaver-gnome + + -- Christian Marillat Mon, 23 Jun 2003 11:18:45 +0200 + +control-center (1:2.2.1-2) unstable; urgency=low + + * Update section + * Move metacity-properties package in control-center (Closes: #188077) + + -- Christian Marillat Mon, 7 Apr 2003 22:42:55 +0200 + +control-center (1:2.2.1-1) unstable; urgency=low + + * New upstream release. + + -- Christian Marillat Fri, 14 Mar 2003 15:17:56 +0100 + +control-center (1:2.2.0.1-1) unstable; urgency=low + + * New upstream release. + * Hack the Icon tag in Advanced.directory (Closes: #179593) + + -- Christian Marillat Wed, 5 Feb 2003 09:49:20 +0100 + +control-center (1:2.2.0-2) unstable; urgency=low + + * Add flex and autotools-dev in Build-Depends (Closes: #178702) + * Move the metacity capplet in a new package metacity-properties + + -- Christian Marillat Thu, 30 Jan 2003 18:40:33 +0100 + +control-center (1:2.2.0-1) unstable; urgency=low + + * New upstream release. + * Add a default theme. Thanks to Johannes Rohr + * Drag and drop for theme work (Closes: #166980) + * Themes aren't sorted case-sensitively (Closes: #166981) + * Should fix key gnome binding properties and metacity key bindings (Closes: #172380) + + -- Christian Marillat Thu, 23 Jan 2003 16:32:09 +0100 + +control-center (1:2.0.3.2-3) unstable; urgency=low + + * Remove duplicate advanced-directory.png + + -- Christian Marillat Sat, 18 Jan 2003 11:54:29 +0100 + +control-center (1:2.0.3.2-2) unstable; urgency=low + + * Use sensible-browser as default browser. + * Add replaces with gnome-desktop-data (Closes: #177141, #176977) + + -- Christian Marillat Fri, 17 Jan 2003 16:10:52 +0100 + +control-center (1:2.0.3.2-1) unstable; urgency=low + + * New upstream release. + + -- Christian Marillat Fri, 20 Dec 2002 13:27:59 +0100 + +control-center (1:2.0.3-2) unstable; urgency=low + + * Should depends on scrollkeeper (Closes: #169850) + + -- Christian Marillat Sun, 24 Nov 2002 16:11:14 +0100 + +control-center (1:2.0.3-1) unstable; urgency=low + + * New upstream release. + + -- Christian Marillat Sun, 24 Nov 2002 15:27:52 +0100 + +control-center (1:2.0.2.91-1) unstable; urgency=low + + * New upstream release. + + -- Christian Marillat Sun, 17 Nov 2002 00:52:21 +0100 + +control-center (1:2.0.1.1-5) unstable; urgency=low + + * Upload to unstable + * Call scrollkeeper-update with -q (Closes: #166625) + * New upstream release (Closes: #110004) + * keyboard setup are correctly restored (Closes: #156856) + * Bugs related to the old interface (Closes: #62491, #81299, #131440, #71042) + * No more problem when rescaling an image (Closes: #72602) + * Sould build correctly under mips (Closes: #163604) + * Can center large image (Closes: #68651) + + -- Christian Marillat Mon, 28 Oct 2002 11:46:53 +0100 + +control-center (1:2.0.1.1-4) experimental; urgency=low + + * Upload with the new original tarball + + -- Christian Marillat Sun, 29 Sep 2002 17:22:15 +0200 + +control-center2 (1:2.0.1.1-3) experimental; urgency=low + + * Update package veriosn to 1:2.0.1.1-3 to supersedes the unstable version + which is 1:1.4.0.5-6 + + -- Christian Marillat Sat, 28 Sep 2002 20:07:45 +0200 + +control-center2 (2.0.1.1-2) experimental; urgency=low + + * Update to standards version 3.5.7 + * Upload withtout the 2 suffix + + -- Christian Marillat Sat, 28 Sep 2002 18:05:58 +0200 + +control-center2 (2.0.1.1-1) experimental; urgency=low + + * New upstream release. + * Remove fam from recommends should be in libgnomevfs2-0 package. + + -- Christian Marillat Thu, 22 Aug 2002 15:44:13 +0200 + +control-center2 (2.0.1-2) experimental; urgency=low + + * Build against the latest libgnomevfs2-dev 2.0.2-4 + + -- Christian Marillat Fri, 16 Aug 2002 17:44:03 +0200 + +control-center2 (2.0.1-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Wed, 7 Aug 2002 12:33:10 +0200 + +control-center2 (2.0.0-3) experimental; urgency=low + + * Should recommends fame. + + -- Christian Marillat Thu, 25 Jul 2002 15:28:22 +0200 + +control-center2 (2.0.0-2) experimental; urgency=low + + * Add x-terminal-emulator in the list of terminal. + * Build against the latest libzvt + + -- Christian Marillat Sun, 7 Jul 2002 20:44:23 +0200 + +control-center2 (2.0.0-1) experimental; urgency=low + + * New upstream release. + * Add support for DEB_HOST_GNU_TYPE DEB_BUILD_GNU_TYPE and + DEB_BUILD_OPTIONS + + -- Christian Marillat Tue, 18 Jun 2002 12:34:40 +0200 + +control-center2 (1.99.10-2) experimental; urgency=low + + * debian/rules Add GCONF_DISABLE_MAKEFILE_SCHEMA_INSTALL=1 in install target. + * Install schemas file in postinst. + * debian/postinst check if schemas files are present before calling + gconftool-2 + * debian/postrm call scrollkeeper-update with -q + * Removed old package in suggests + * Update the menu file with the rigth binary name + + -- Christian Marillat Sun, 9 Jun 2002 20:29:30 +0200 + +control-center2 (1.99.10-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Sun, 12 May 2002 14:59:06 +0200 + +control-center2 (1.99.9-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Tue, 30 Apr 2002 10:47:01 +0200 + +control-center2 (1.99.7-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Mon, 22 Apr 2002 18:17:28 +0200 + +control-center2 (1.99.6-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Sun, 14 Apr 2002 17:43:36 +0200 + +control-center2 (1.99.4-3) experimental; urgency=low + + * Need to Depends on gnome-desktop-data + + -- Christian Marillat Wed, 13 Mar 2002 11:17:58 +0100 + +control-center2 (1.99.4-2) experimental; urgency=low + + * Need to Depends on gnome-session2 (Closes: #137961) + + -- Christian Marillat Wed, 13 Mar 2002 11:05:26 +0100 + +control-center2 (1.99.4-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Mon, 11 Mar 2002 14:49:29 +0100 + +control-center2 (1.99.3-2) experimental; urgency=low + + * Remove duplicate session.desktop file. + + -- Christian Marillat Mon, 25 Feb 2002 18:14:07 +0100 + +control-center2 (1.99.3-1) experimental; urgency=low + + * New upstream release + + -- Christian Marillat Fri, 15 Feb 2002 00:35:49 +0100 + +control-center2 (1.99.0-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Sun, 20 Jan 2002 18:08:37 +0100 + +control-center (1:1.5.11-1) unstable; urgency=low + + * New upstream release. + + -- Christian Marillat Mon, 17 Dec 2001 17:49:00 +0100 + +control-center (1:1.5.8-1) unstable; urgency=low + + * New upstream release. + + -- Christian Marillat Sat, 6 Oct 2001 19:12:41 +0200 + +control-center (1:1.5.4-1) unstable; urgency=low + + * New upstream release. + * debian/*.sgml Use docbook 4.1 + + -- Christian Marillat Mon, 6 Aug 2001 15:30:44 +0200 + +control-center (1:1.4.0.1-11) unstable; urgency=low + + * Update config.sub and config.guess (Closes: #103733, #103903) + * Remove libtool hack. + + -- Christian Marillat Sun, 8 Jul 2001 11:36:30 +0200 + +control-center (1:1.4.0.1-10) unstable; urgency=low + + * Switch to debhelper V3 + * Change the WPrefs location in WindowMaker.desktop (Closes: #101148) + * Change libraries versionning to (>= 1:1.4.0.1-6) instead of the latest + package number. + + -- Christian Marillat Fri, 22 Jun 2001 16:48:15 +0200 + +control-center (1:1.4.0.1-9) unstable; urgency=low + + * Rewrote the callbacks.c patch (not complete) (Closes: #98085) + + -- Christian Marillat Sun, 20 May 2001 09:36:48 +0200 + +control-center (1:1.4.0.1-8) unstable; urgency=low + + * Depends on gnome-bin (Closes: #97677) + * Depends on xbase-clients + + -- Christian Marillat Fri, 18 May 2001 00:06:13 +0200 + +control-center (1:1.4.0.1-7) unstable; urgency=low + + * Patch callbacks.c to reflect change in the new xscreensaver package (3.32-1) + and update the suggests field. Thaks to Roderich Schupp. (Closes: #96542) + + -- Christian Marillat Sun, 6 May 2001 22:34:12 +0200 + +control-center (1:1.4.0.1-6) unstable; urgency=low + + * Build against the latest gnome-libs 1.2.13-5. + + -- Christian Marillat Tue, 24 Apr 2001 12:39:50 +0200 + +control-center (1:1.4.0.1-5) unstable; urgency=low + + * Typo in build depends (Closes: #93267) + * Rewrote Flame.desktop + + -- Christian Marillat Sat, 14 Apr 2001 15:32:28 +0200 + +control-center (1:1.4.0.1-4) unstable; urgency=low + + * Really add docbook-to-man in build-depends (Closes: #93190) + * Replace libungif3g-dev by libungif4-dev in build-depends (Closes: #93197) + + -- Christian Marillat Sat, 7 Apr 2001 12:18:03 +0200 + +control-center (1:1.4.0.1-3) unstable; urgency=low + + * Remove unused Flame.desktop (Closes: #92850) + * Patch po/Makefile.in.in to use DESTDIR + * Add scrollkeeper in depends (Closes: #93007) + + -- Christian Marillat Thu, 5 Apr 2001 18:30:35 +0200 + +control-center (1:1.4.0.1-2) unstable; urgency=low + + * Add docbook-to-man in build-depends (Closes: #92421) + * Don't compress control-center.sgml (Closes: #92603) + * Call scrollkeeper-update in postinst and prerm for gnome-control-center + + -- Christian Marillat Mon, 2 Apr 2001 21:35:15 +0200 + +control-center (1:1.4.0.1-1) unstable; urgency=low + + * New upstream release. + * Write 12 manpages (Closes: #87098) + + -- Christian Marillat Fri, 30 Mar 2001 19:38:51 +0200 + +control-center (1:1.4.0-1) unstable; urgency=low + + * New upstream release. + * debian/control build-depends on libgnome-vfs-dev and xml-i18n-tools + + -- Christian Marillat Mon, 19 Mar 2001 11:10:30 +0100 + +control-center (1:1.2.4-1) unstable; urgency=low + + * New upstream release. + * Add libgdk-pixbuf-dev in build-depends (Closes: #87416) + * debian/menu The session properties capplet is now on the gnome-core + package, remove this menu entry. + + -- Christian Marillat Thu, 8 Mar 2001 00:12:29 +0100 + +control-center (1:1.2.3-1) unstable; urgency=low + + * New upstream release. + * Removed locale and callback patchs included by upstream. + * No more lockup while closing desktop (Closes: #76215) + + -- Christian Marillat Sun, 18 Feb 2001 15:57:25 +0100 + +control-center (1:1.2.2-10) unstable; urgency=low + + * Build against the latest gnome-libs 1.2.11 + + -- Christian Marillat Mon, 5 Feb 2001 14:53:58 +0100 + +control-center (1:1.2.2-9) unstable; urgency=low + + * Remove xpm4g-dev from Build-depends (Closes: #82556) + + -- Christian Marillat Wed, 17 Jan 2001 10:04:01 +0100 + +control-center (1:1.2.2-8) unstable; urgency=low + + * Patch to show the right debian version (Closes: #82391) + + -- Christian Marillat Mon, 15 Jan 2001 15:35:59 +0100 + +control-center (1:1.2.2-7) unstable; urgency=low + + * Remove imlib-progs from depends. Move gnome-core from depends to Suggests. + + -- Christian Marillat Thu, 30 Nov 2000 11:59:04 +0100 + +control-center (1:1.2.2-6) unstable; urgency=low + + * Change fonts attribute in callback.dpatch (Closes: #75320) + * Install symlinks in /usr/share/doc for -dev package. + + -- Christian Marillat Thu, 2 Nov 2000 17:48:11 +0100 + +control-center (1:1.2.2-5) unstable; urgency=low + + * Patch all capplets to add a call to setlocale(LC_ALL, ""). + + -- Christian Marillat Fri, 20 Oct 2000 15:55:34 +0200 + +control-center (1:1.2.2-4) unstable; urgency=low + + * Add a patch to display russian and other 8 byte character correctly + thanks to ChiDeok Hwang + * New version close this old bug (Closes: #58797) + + -- Christian Marillat Wed, 11 Oct 2000 17:54:29 +0200 + +control-center (1:1.2.2-3) unstable; urgency=low + + * Fix bad symlink in gnome-control-center (Closes: #74279) + + -- Christian Marillat Mon, 9 Oct 2000 15:02:57 +0200 + +control-center (1:1.2.2-2) unstable; urgency=low + + * Arrange documentation for dhelp. + + -- Christian Marillat Fri, 6 Oct 2000 17:09:54 +0200 + +control-center (1:1.2.2-1) unstable; urgency=low + + * Return to the 1.2 branch, because 1.3 is ... + * Switch to debhelper V2. + * New/old GUI (Closes: #71043, #71040, #71039, #71038) + + -- Christian Marillat Mon, 25 Sep 2000 17:33:23 +0200 + +control-center (1.3.0-5) unstable; urgency=low + + * Add debhelper in Build-Depends (Closes: #70220) + * Build against libungif4g (Closes: #71236) + + -- Christian Marillat Sun, 10 Sep 2000 00:48:36 +0200 + +control-center (1.3.0-4) unstable; urgency=low + + * Patch configure to install session-properties-capplet. + + -- Christian Marillat Thu, 24 Aug 2000 20:35:38 +0200 + +control-center (1.3.0-3) unstable; urgency=low + + * Install screensaver-properties.desktop in the right place (Closes: #69502). + * Install Documents.directory and Session.directory files. + + -- Christian Marillat Mon, 21 Aug 2000 00:59:43 +0200 + +control-center (1.3.0-2) unstable; urgency=low + + * debian/control Added imlib-progs in the dependencies field (Closes: #69427). + + -- Christian Marillat Sat, 19 Aug 2000 22:31:37 +0200 + +control-center (1.3.0-1) unstable; urgency=low + + * New upstream release. + + -- Christian Marillat Mon, 14 Aug 2000 15:32:43 +0200 + +control-center (1.2.1-1) unstable; urgency=low + + * New upstrem release. + * debian/patches Added 2 patches for IceWM.desktop and WindowMaker.desktop + (Closes: #47353, #48099). + * New e-mail address. + * Removed 2 undocumented manpages (bell-properties-capplet.1, e-conf.1). + * Removed property-background patche. + * debian/menu removed entry for bell-properties and put all entrys in + System/Gnome. + + -- Christian Marillat Wed, 2 Aug 2000 09:03:59 +0200 + +control-center (1.2.0-2) unstable; urgency=low + + * Updated the Build-depends field. (Closes: #64904) + + -- Christian Marillat Tue, 30 May 2000 10:15:38 +0200 + +control-center (1.2.0-1) unstable; urgency=low + + * New upstream source (Closes: #64584) + * debian/control removed depends libcapplet0 provided by shlibs:Depends. + * Updated Standards-Version to 3.1.1.1 added Build-depends field. + + -- Christian Marillat Thu, 25 May 2000 19:21:14 +0200 + +control-center (1.0.53-1) unstable; urgency=low + + * New upstream source. + + -- Christian Marillat Fri, 31 Mar 2000 11:32:47 +0200 + +control-center (1.0.51-5) frozen unstable; urgency=low + + * debian/copyright updated to the new directory. + + -- Christian Marillat Wed, 22 Mar 2000 23:17:17 +0100 + +control-center (1.0.51-4) frozen unstable; urgency=low + + * Apply a patch I wrote to fix the RCB. Closes: #51568 + * New maintainer. Christian Marillat is taking the package over. + I'm sponsoring him for the moment ... + * Changed the description. Removed the part about beta software. + Closes: #54979 + * Applied the patch for centering the background picture. + Closes: #54285 + * Added patch-on-the-fly support to debian/rules. + + -- Raphael Hertzog Tue, 21 Mar 2000 20:31:20 +0100 + +control-center (1.0.51-3) frozen unstable; urgency=low + + * NMU. + * Fixes RC bug #56769, WindowMaker wm settings fixed. + + -- Chris McKillop Thu, 3 Feb 2000 07:13:39 -0500 + +control-center (1.0.51-2) frozen unstable; urgency=low + + * Orphaned. + + -- Michael Alan Dorman Thu, 3 Feb 2000 07:13:29 -0500 + +control-center (1.0.51-1) unstable; urgency=low + + * Officially claimed as my own. + * libcapplet has been stripped for a while (closes: bug#31245) + * We've updated... (closes: bug#44136) + * Correct xworm definition for screensaver (closes: bug#51514) + * The libc/libglib issues are resolved now (closes: bug#37535) + * control-center is much more stable, and should work with window-maker (closes: bug#38706) + * gnomecc seems to respect current bg color better (closes: bug#38917) + * Couldn't reproduce this error with current versions (closes: bug#38995) + * Invoking individual capplets seems to work now (closes: bug#39135) + * Screensavers seem to be more stable now (closes: bug#41992) + * URL handler assignments seems to work now (closes: bug#44983) + * Fudged dependency on esd to get rid of versioned depends (closes: bug#52353) + * Totally revamped build process (closes: bug#33848, bug#38344) + * Appears to have been fixed (closes: bug#33736, bug#33472)) + + -- Michael Alan Dorman Mon, 20 Dec 1999 14:19:48 -0500 + +control-center (1.0.51-0.2) unstable; urgency=low + + * Fix from Christian Marillat for wm-properties + + -- Michael Alan Dorman Tue, 19 Oct 1999 14:22:43 -0400 + +control-center (1.0.51-0.1) unstable; urgency=low + + * New upstream version. NMU. + + -- Michael Alan Dorman Sun, 10 Oct 1999 16:48:39 -0400 + +control-center (1.0.50-0.1) unstable; urgency=low + + * New upstream version. NMU + + -- Michael Alan Dorman Thu, 30 Sep 1999 22:24:11 -0400 + +control-center (1.0.5-2) unstable; urgency=low + + * Actually changed maintainer address in debian/control + * Fixed up WindowMaker and IceWM paths for wm-properties + + -- Steve Haslam Thu, 27 May 1999 02:05:10 +0100 + +control-center (1.0.5-1) unstable; urgency=low + + * New maintainer. + * Moved "xscreensaver" to "Suggests:" field. (Bug#32724) + * Called dh_strip when making libcapplet-dev + + -- Steve Haslam Thu, 20 May 1999 03:50:25 +0100 + +control-center (1.0.5-0.1) unstable; urgency=low + + * Non-maintainer upload + * New upstream version + + -- Steve Haslam Mon, 19 Apr 1999 10:08:13 +0100 + +control-center (1.0.1-0.1) unstable; urgency=low + + * NMU for GNOME-1.0 + + -- Jules Bean Fri, 5 Mar 1999 10:34:56 +0000 + +control-center (0.99.3-3) unstable; urgency=low + + * Patched to remove #define HAVE_REDHAT_SCREENSAVER_RPM. + Also, added Recommends: xscreensaver + Fixes: BUG#32462 + + -- Jim Pick Wed, 27 Jan 1999 21:40:24 -0800 + +control-center (0.99.3-2) unstable; urgency=low + + * Recompiled due to dependencies. + + -- Jim Pick Sun, 24 Jan 1999 01:11:12 -0800 + +control-center (0.99.3-1) unstable; urgency=low + + * New upstream release. + + -- Jim Pick Thu, 21 Jan 1999 21:31:48 -0800 + +gnome-core (0.30-2) frozen unstable; urgency=low + + * Recompiled with new libs. + * Fixed reference to /usr/X11R6 in README.Debian. + * Added warnings (Gnome is ALPHA). + * Patched dialer_applet to use pon/poff. + * Patched drivemount_applet to default to /floppy. + + -- Jim Pick Tue, 24 Nov 1998 10:56:08 -0800 + +gnome-core (0.30-1) unstable; urgency=low + + * New upstream release. + + -- Jim Pick Thu, 24 Sep 1998 21:28:02 -0700 + +gnome-core (0.28.1-1) unstable; urgency=low + + * New upstream release. + * Hopefully fixes panel applet bug. + + -- Jim Pick Wed, 19 Aug 1998 20:12:25 -0700 + +gnome-core (0.28-1) unstable; urgency=low + + * New upstream release. + + -- Jim Pick Mon, 17 Aug 1998 12:59:26 -0700 + +gnome-core (0.27-1) unstable; urgency=low + + * New upstream release. + * Added /usr/doc/gnome + + -- Jim Pick Sat, 15 Aug 1998 14:21:06 -0700 + +gnome-core (0.25-1) unstable; urgency=low + + * New upstream release. + + -- Jim Pick Thu, 6 Aug 1998 22:51:22 -0700 + +gnome-core (0.20-2) unstable; urgency=low + + * Added Debian menu-method for gnome-panel. Fixed Bug #24025 + (Thanks to Ray Dassen for reporting the bug, and Riku Voipio + who wrote the menu method for Gnome 0.12) + + -- Jim Pick Wed, 22 Jul 1998 20:22:00 -0700 + +gnome-core (0.20-1) unstable; urgency=low + + * New upstream release. + + -- Jim Pick Mon, 8 Jun 1998 12:00:08 -0700 + +gnome-core (0.13-1) unstable; urgency=low + + * Initial Release. + + -- Jim Pick Mon, 16 Mar 1998 15:27:43 -0800 + + --- gnome-control-center-2.24.0.1.orig/debian/control-center2.xpm +++ gnome-control-center-2.24.0.1/debian/control-center2.xpm @@ -0,0 +1,186 @@ +/* XPM */ +static char *control-center2[] = { +/* columns rows colors chars-per-pixel */ +"32 32 148 2", +" c #000000", +". c #02070C", +"X c #04080A", +"o c #080807", +"O c #0C0C0B", +"+ c #010C16", +"@ c #090C10", +"# c #0C1217", +"$ c #100F0F", +"% c #11100F", +"& c #151514", +"* c #141619", +"= c #17191B", +"- c #191816", +"; c #1B1C1C", +": c #0C263E", +"> c #192023", +", c #1B252D", +"< c #172B3B", +"1 c #192B3C", +"2 c #22211E", +"3 c #232525", +"4 c #242529", +"5 c #21282B", +"6 c #292824", +"7 c #2C2B29", +"8 c #2B2E31", +"9 c #24313F", +"0 c #2D3135", +"q c #2F363B", +"w c #2F393B", +"e c #302E2C", +"r c #34322F", +"t c #333333", +"y c #363B3F", +"u c #3B3A35", +"i c #3A3A39", +"p c #0B2946", +"a c #112C42", +"s c #1E3344", +"d c #1C364C", +"f c #2C3A42", +"g c #343E47", +"h c #2F4658", +"j c #32414B", +"k c #3C4042", +"l c #334453", +"z c #264662", +"x c #304D67", +"c c #395168", +"v c #413D39", +"b c #42413E", +"n c #41484E", +"m c #4A4741", +"M c #4B4945", +"N c #4F4D4A", +"B c #4D565D", +"V c #555146", +"C c #52514F", +"Z c #50585E", +"A c #595754", +"S c #5E5C57", +"D c #585858", +"F c #455767", +"G c #43596A", +"H c #486278", +"J c #5B6869", +"K c #576B76", +"L c #586B79", +"P c #63615D", +"I c #656462", +"U c #6A6760", +"Y c #6B6A65", +"T c #6E6E6C", +"R c #6A737B", +"E c #73716C", +"W c #747370", +"Q c #7E7C74", +"! c #7E7D7A", +"~ c #5D758B", +"^ c #667C8E", +"/ c #637D94", +"( c #6E8395", +") c #6C8499", +"_ c #708597", +"` c #71879B", +"' c #74899A", +"] c #7B8D9D", +"[ c #758DA2", +"{ c #7B93A7", +"} c #86847E", +"| c #858482", +" . c #8A8782", +".. c #8C8A85", +"X. c #8C8C8B", +"o. c #838F9A", +"O. c #80919D", +"+. c #908E86", +"@. c #918F89", +"#. c #94938D", +"$. c #9A968E", +"%. c #999791", +"&. c #9C9A94", +"*. c #8597A6", +"=. c #859AAC", +"-. c #8A99A6", +";. c #899DAF", +":. c #859EB4", +">. c #8DA3B4", +",. c #8FA5B8", +"<. c #99A4AE", +"1. c #97A7B6", +"2. c #90A7B9", +"3. c #9CADBC", +"4. c #A29E97", +"5. c #A5A29B", +"6. c #ACA9A3", +"7. c #B1AFA7", +"8. c #B4B2AB", +"9. c #B9B6AE", +"0. c #BCB9B3", +"q. c #99AEC1", +"w. c #A0B2C2", +"e. c #ACBBC9", +"r. c #BDCBD7", +"t. c #C2BEB2", +"y. c #C6C3BC", +"u. c #CAC6BE", +"i. c #CCC8BE", +"p. c #CCC9C2", +"a. c #D1CDC5", +"s. c #D2CFC8", +"d. c #D4D0C7", +"f. c #D5D2CB", +"g. c #D9D6CD", +"h. c #DCD8CF", +"j. c #D6D5D3", +"k. c #D9D6D1", +"l. c #DDDAD5", +"z. c #DBDCDB", +"x. c #E2DFD7", +"c. c #E1DFDA", +"v. c #E5E2DD", +"b. c #E5E5E2", +"n. c #E9E7E1", +"m. c #EFEEEE", +"M. c #F1F0EC", +"N. c None", +/* pixels */ +"N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.", +"N.N.N.N.N.N.N.N.N. N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.", +"N.N.N.N.N.N. N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.", +"N.N.N.N. I W ; N.N.N.N.N.N.N. X # N.N.N.N.N.N.", +"N.N.N.N. - % ..z.8.U & N.N.N.N.N. X B X.t N.N.N.N.N.", +"N.N.N. O o & I y.s.! O N.N.N. F j.z.8.7 N.N.N.N.", +"N.N. A k.8.- N.N. . F k.x.j.7.g o N.N.N.N.", +" N. O O P l.6.O N.N. k z.b.b.l.E @ N.N.N.N.", +" X.&.* C p.t...O N. D m.b.v.#.* N.N.N.N.N.", +" ! z.%.i I l.x.9.| ; o N. T M.l.&.5 N.N.N.N.N.N.", +" & &.b.j.n.x.t.5.y.0.+.m O i g.0.Q t N.N.N.N.N.N.N.", +" & | z.f.#.m S 0.f.s.p.%.r o 3 0.&.e N.N.N.N.N.N.N.", +" o ; 7 $ o v $.g.g.a.i.#.P W - N.N. N.N.N.N.N.N.", +"N. $ Y p.x.p.a.p.$.u o N.N.N.", +"N.N. o v 5.l.l.p.d.a.+.u o N.N.N.", +"N.N.N. O v Y u.v.h.i.d.u.} ; o ", +"N.N.N.N. o C Q 6 r #.x.v.d.i.d.t.U 2 ", +"N.N.N.N.N.N. N. o y R n V V O $ M 0.n.v.i.i.s.8.Y - ", +"N.N.N.N.N.N.N.N. 3 R *.;.{ F 4 ; E f.n.h.i.i.9.%.2 ", +"N.N.N.N.N.N.N. 8 o.] ) ;./ z + t .x.v.8.v &.Y ", +"N.N.N.N.N.N. 0 ] ) [ 2.=.x p + O M 6.0...p.P ", +"N.N.N.N.N. q *.( ' ;.2.c : 1 N. 2 U 4.Q - ", +"N.N.N.N. t *.) [ :.2.H : l 4 N.N. O o ", +"N.N.N. 3 <.' [ >.2.~ : s k O N.N.N. ", +"N.N.N.o R 1.*.q.q./ a 1 g * N.N.N.N.N.N. ", +"N.N.N.* e.e.r.e.) d a g - N.N.N.N.N.N.N.N.N. ", +"N.N. , e.w.3.` h < j ; N.N.N.N.N.N.N.N.N.N.N. ", +"N.N.N.* ] ' / L g f > N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.", +"N.N.N. 9 G L J w & N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.", +"N.N.N.N. @ > ; O N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.", +"N.N.N.N.N. N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.", +"N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N.N." +}; --- gnome-control-center-2.24.0.1.orig/debian/visual-effects_extra.svg +++ gnome-control-center-2.24.0.1/debian/visual-effects_extra.svg @@ -0,0 +1,1137 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + image/svg+xml + + + + Lapo Calamandrei + + + + Visual Effects + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + --- gnome-control-center-2.24.0.1.orig/debian/capplets-data.install +++ gnome-control-center-2.24.0.1/debian/capplets-data.install @@ -0,0 +1,12 @@ +debian/tmp/etc +debian/tmp/usr/share/gnome-control-center/glade +debian/tmp/usr/share/gnome-control-center/keybindings +debian/tmp/usr/share/gnome-control-center/pixmaps +debian/tmp/usr/share/gnome-control-center/default-apps +debian/tmp/usr/share/icons/hicolor +debian/tmp/usr/share/locale +debian/tmp/usr/share/mime/packages/gnome-theme-package.xml +debian/tmp/usr/share/gnome +debian/tmp/usr/share/applications/*.desktop +debian/tmp/usr/share/omf +debian/tmp/usr/share/desktop-directories --- gnome-control-center-2.24.0.1.orig/debian/control.in +++ gnome-control-center-2.24.0.1/debian/control.in @@ -0,0 +1,140 @@ +Source: gnome-control-center +Section: gnome +Priority: optional +Maintainer: Ubuntu Desktop Team +XSBC-Original-Maintainer: Marco Cabizza +Uploaders: @GNOME_TEAM@ +Standards-Version: 3.7.3 +Vcs-Bzr: http://code.launchpad.net/~ubuntu-core-dev/gnome-control-center/ubuntu +Build-Depends: cdbs (>= 0.4.41), + gnome-pkg-tools (>= 0.10), + dpkg-dev (>= 1.13.19), + debhelper (>= 5.0.0), + libgtk2.0-dev (>= 2.11.6), + libgnomeui-dev (>= 2.16.0-2), + intltool (>= 0.35.5), + libglade2-dev (>= 2.4.0-1), + libgnome-desktop-dev (>= 1:2.23.5), + zlib1g-dev, + flex, + libmetacity-dev (>= 1:2.23.1), + libxcursor-dev, + libbonobo2-dev (>= 2.6.2-6), + libnautilus-extension-dev (>= 1:2.21.6), + libxrandr-dev, + docbook-to-man, + libgstreamer0.10-dev (>= 0.10.1.2), + libgstreamer-plugins-base0.10-dev (>= 0.10.1.2), + autotools-dev, + libxss-dev, + libxinerama-dev, + libxft-dev (>= 2.1.2), + libxxf86misc-dev, + libxkbfile-dev, + libebook1.2-dev (>= 1.7.90), + desktop-file-utils, + gnome-doc-utils (>= 0.3.2), + libgnome-menu-dev (>= 2.12.0), + libx11-dev, + libxrender-dev, + libgconf2-dev, + libbonoboui2-dev, + libesd0-dev, + libgnomevfs2-dev, + libfontconfig1-dev, + libfreetype6-dev, + libglib2.0-dev (>= 2.16.0), + libxt-dev, + libhal-dev (>= 0.5.6), + libdbus-1-dev (>= 0.32), + libdbus-glib-1-dev (>= 0.32), + librsvg2-dev, + libpanel-applet2-dev, + libgnomekbd-dev (>= 2.21.4.1), + shared-mime-info, + libpango1.0-dev (>= 1.17), + libgnomekbdui-dev (>= 2.21.4.1), + scrollkeeper, + libxklavier12-dev (>= 3.6), + libeel2-dev, + gnome-settings-daemon-dev (>= 2.22.0), + libcanberra-gtk-dev + +Package: gnome-control-center +Architecture: any +Section: gnome +Depends: ${shlibs:Depends}, + ${misc:Depends}, + capplets-data (>= ${gnome:Version}), + capplets-data (<< ${gnome:NextVersion}), + libgnome-window-settings1 (= ${binary:Version}), + gnome-settings-daemon, + gnome-menus (>= 2.12.0), + gnome-desktop-data, + gnome-icon-theme (>= 2.16), + desktop-file-utils, + gconf2-common (>= 2.23.2-0ubuntu3), + ubuntu-system-service (>= 0.1.10) +Recommends: bzip2, + evolution-data-server, + gnome-user-guide, + mousetweaks, + gnome-session, + screen-resolution-extra +Replaces: capplets +Conflicts: capplets, + gnome-session (<< 2.22.0) +Suggests: esound-clients, + gnome-screensaver | xscreensaver, + xbase-clients, + gstreamer0.10-alsa | gstreamer0.10-audiosink, + xrdb +Description: utilities to configure the GNOME desktop + This package contains configuration applets for the GNOME desktop, + allowing to set accessibility configuration, desktop fonts, keyboard + and mouse properties, sound setup, desktop theme and background, user + interface properties, screen resolution, and other GNOME parameters. + . + It also contains a front end to these applets, which can also be + accessed with the GNOME panel or the Nautilus file manager. + +Package: capplets-data +Architecture: all +Section: gnome +Depends: scrollkeeper, ${misc:Depends} +Recommends: gnome-control-center (>= ${source:Version}) +Description: configuration applets for GNOME 2 - data files + This package contains data files (icons, pixmaps, locales files) needed by + the configuration applets in the gnome-control-center package. + +Package: libgnome-window-settings1 +Architecture: any +Section: libs +Depends: ${shlibs:Depends}, + ${misc:Depends} +Replaces: gnome-control-center (<< 1:2.14.1-1), + capplets +Conflicts: capplets +Description: Utility library for getting window manager settings + This package contains the libwindow-settings library, which is used by + the GNOME window managers. + +Package: libgnome-window-settings-dev +Architecture: all +Section: libdevel +Depends: ${shlibs:Depends}, + ${misc:Depends}, + libgnome-window-settings1 (>= ${source:Version}) +Replaces: gnome-control-center (<< 1:2.14.1-1) +Description: Utility library for getting window manager settings (headers) + This package contains the libwindow-settings library header files. + +Package: gnome-control-center-dev +Architecture: all +Section: devel +Conflicts: libgnome-settings-daemon-dev +Replaces: libgnome-settings-daemon-dev +Depends: ${misc:Depends} +Description: utilities to configure the GNOME desktop + This package contains the file required to get the keydirs location + --- gnome-control-center-2.24.0.1.orig/debian/compat +++ gnome-control-center-2.24.0.1/debian/compat @@ -0,0 +1 @@ +5 --- gnome-control-center-2.24.0.1.orig/debian/libgnome-settings-daemon-dev.install +++ gnome-control-center-2.24.0.1/debian/libgnome-settings-daemon-dev.install @@ -0,0 +1,3 @@ +debian/tmp/usr/include/gnome-settings-daemon-2.0/gnome-settings-daemon/*.h +debian/tmp/usr/lib/pkgconfig/gnome-settings-daemon.pc +debian/tmp/usr/share/pkgconfig/gnome-keybindings.pc --- gnome-control-center-2.24.0.1.orig/debian/shlibs.local +++ gnome-control-center-2.24.0.1/debian/shlibs.local @@ -0,0 +1 @@ +libgnome-window-settings 1 libgnome-window-settings1 (>= 1:2.17.5) --- gnome-control-center-2.24.0.1.orig/debian/gnome-control-center.menu +++ gnome-control-center-2.24.0.1/debian/gnome-control-center.menu @@ -0,0 +1,4 @@ +?package(gnome-control-center):needs="X11" section="Applications/System/Administration" \ + hints="Gnome" title="Gnome Control Center" \ + icon="/usr/share/pixmaps/control-center2.xpm" \ + command="/usr/bin/gnome-control-center" --- gnome-control-center-2.24.0.1.orig/debian/patches/80_aspect_in_dropdown.patch +++ gnome-control-center-2.24.0.1/debian/patches/80_aspect_in_dropdown.patch @@ -0,0 +1,82 @@ +diff -Nur -x '*.orig' -x '*~' ubuntu/capplets/display/xrandr-capplet.c ubuntu.new/capplets/display/xrandr-capplet.c +--- ubuntu/capplets/display/xrandr-capplet.c 2008-09-09 12:20:05.000000000 +0200 ++++ ubuntu.new/capplets/display/xrandr-capplet.c 2008-09-09 12:21:36.000000000 +0200 +@@ -523,6 +523,48 @@ + return i; + } + ++static const char * ++generate_mode_text (int width, int height) ++{ ++ int ratio; ++ const char *aspect = NULL; ++ ++ if (width && height) { ++ if (width > height) ratio = width * 10 / height; ++ else ratio = height * 10 / width; ++ ++ switch (ratio) { ++ case 13: ++ aspect = "4:3"; ++ break; ++ case 16: ++ aspect = "16:10"; ++ break; ++ case 17: ++ aspect = "16:9"; ++ break; ++ case 12: ++ aspect = "5:4"; ++ break; ++ // This catches 1.5625 as well (1600x1024) when maybe it shouldn't. ++ case 15: ++ aspect = "3:2"; ++ break; ++ case 18: ++ aspect = "9:5"; ++ break; ++ case 10: ++ aspect = "1:1"; ++ break; ++ } ++ } ++ ++ if (aspect) ++ return idle_free (g_strdup_printf (_("%d x %d (%s)"), width, height, aspect)); ++ else ++ return idle_free (g_strdup_printf (_("%d x %d"), width, height)); ++} ++ + static void + rebuild_resolution_combo (App *app) + { +@@ -546,7 +588,7 @@ + height = gnome_rr_mode_get_height (modes[i]); + + add_key (app->resolution_combo, +- idle_free (g_strdup_printf (_("%d x %d"), width, height)), ++ generate_mode_text (width, height), + width, height, 0, -1); + + if (width * height > best_w * best_h) +@@ -565,17 +607,15 @@ + } + else + { +- current = idle_free (g_strdup_printf (_("%d x %d"), +- app->current_output->width, +- app->current_output->height)); ++ current = generate_mode_text (app->current_output->width, ++ app->current_output->height); + } + + + if (!combo_select (app->resolution_combo, current)) + { + combo_select (app->resolution_combo, +- idle_free ( +- g_strdup_printf (_("%d x %d"), best_w, best_h))); ++ generate_mode_text (best_w, best_h)); + } + } + --- gnome-control-center-2.24.0.1.orig/debian/patches/25_window_manager_settings.patch +++ gnome-control-center-2.24.0.1/debian/patches/25_window_manager_settings.patch @@ -0,0 +1,45 @@ +diff -Nur control-center-2.16.3/capplets/windows/Makefile.am control-center-2.16.3.new/capplets/windows/Makefile.am +--- control-center-2.16.3/capplets/windows/Makefile.am 2007-01-29 12:10:38.000000000 +0100 ++++ control-center-2.16.3.new/capplets/windows/Makefile.am 2007-03-17 15:25:59.000000000 +0100 +@@ -17,7 +17,7 @@ + + INCLUDES = $(GNOMECC_CAPPLETS_CFLAGS) \ + -I$(top_srcdir)/libwindow-settings \ +- -DGNOME_WINDOW_MANAGER_MODULE_PATH=\""$(libdir)/window-manager-settings"\" \ ++ -DGNOME_WINDOW_MANAGER_MODULE_PATH=\""$(libdir)/libgnome-window-settings1"\" \ + -DGLADEDIR=\""$(gladedir)"\" \ + -DPIXMAPDIR=\""$(pixmapdir)"\" + +diff -Nur control-center-2.16.3/capplets/windows/Makefile.in control-center-2.16.3.new/capplets/windows/Makefile.in +--- control-center-2.16.3/capplets/windows/Makefile.in 2007-01-30 10:28:40.000000000 +0100 ++++ control-center-2.16.3.new/capplets/windows/Makefile.in 2007-03-17 15:25:59.000000000 +0100 +@@ -343,7 +343,7 @@ + desktop_DATA = $(Desktop_in_files:.desktop.in=.desktop) + INCLUDES = $(GNOMECC_CAPPLETS_CFLAGS) \ + -I$(top_srcdir)/libwindow-settings \ +- -DGNOME_WINDOW_MANAGER_MODULE_PATH=\""$(libdir)/window-manager-settings"\" \ ++ -DGNOME_WINDOW_MANAGER_MODULE_PATH=\""$(libdir)/libgnome-window-settings1"\" \ + -DGLADEDIR=\""$(gladedir)"\" \ + -DPIXMAPDIR=\""$(pixmapdir)"\" + +diff -Nur control-center-2.16.3/libwindow-settings/Makefile.am control-center-2.16.3.new/libwindow-settings/Makefile.am +--- control-center-2.16.3/libwindow-settings/Makefile.am 2007-01-29 12:10:31.000000000 +0100 ++++ control-center-2.16.3.new/libwindow-settings/Makefile.am 2007-03-17 15:25:59.000000000 +0100 +@@ -1,4 +1,4 @@ +-WM_MODULE_DIR=$(libdir)/window-manager-settings ++WM_MODULE_DIR=$(libdir)/libgnome-window-settings1 + + INCLUDES = \ + -DGNOMELOCALEDIR=\""$(prefix)/$(DATADIRNAME)/locale"\" \ +diff -Nur control-center-2.16.3/libwindow-settings/Makefile.in control-center-2.16.3.new/libwindow-settings/Makefile.in +--- control-center-2.16.3/libwindow-settings/Makefile.in 2007-01-30 10:28:47.000000000 +0100 ++++ control-center-2.16.3.new/libwindow-settings/Makefile.in 2007-03-17 15:26:58.000000000 +0100 +@@ -345,7 +345,7 @@ + target_alias = @target_alias@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ +-WM_MODULE_DIR = $(libdir)/window-manager-settings ++WM_MODULE_DIR = $(libdir)/libgnome-window-settings1 + INCLUDES = \ + -DGNOMELOCALEDIR=\""$(prefix)/$(DATADIRNAME)/locale"\" \ + -DGNOME_ICONDIR=\""${prefix}/share/pixmaps"\" \ --- gnome-control-center-2.24.0.1.orig/debian/patches/105_cc-randr12-ubuntu-colors.patch +++ gnome-control-center-2.24.0.1/debian/patches/105_cc-randr12-ubuntu-colors.patch @@ -0,0 +1,23 @@ +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.24.0/capplets/display/xrandr-capplet.c.rej gnome-control-center-2.24.0.new/capplets/display/xrandr-capplet.c.rej +--- gnome-control-center-2.24.0/capplets/display/xrandr-capplet.c.rej 1970-01-01 01:00:00.000000000 +0100 ++++ gnome-control-center-2.24.0.new/capplets/display/xrandr-capplet.c.rej 2008-09-24 10:00:35.000000000 +0200 +@@ -0,0 +1,19 @@ ++*************** ++*** 1275,1282 **** ++ GTK_WIDGET (app->area), text); ++ } ++ ++- #define BACKGROUND_FILL_RGBA 0.72, 0.78, 0.87, 1.0 ++- #define BACKGROUND_STROKE_RGBA 0.44, 0.59, 0.76, 1.0 ++ ++ static void ++ paint_background (FooScrollArea *area, ++--- 1275,1282 ---- ++ GTK_WIDGET (app->area), text); ++ } ++ +++ #define BACKGROUND_FILL_RGBA 0.52, 0.27, 0.09, 1.0 +++ #define BACKGROUND_STROKE_RGBA 0.33, 0.13, 0.00, 1.0 ++ ++ static void ++ paint_background (FooScrollArea *area, --- gnome-control-center-2.24.0.1.orig/debian/patches/16_preferred_applications_list_cleanup.patch +++ gnome-control-center-2.24.0.1/debian/patches/16_preferred_applications_list_cleanup.patch @@ -0,0 +1,47 @@ +# Description: don't list mozilla commands which are compatibility symlinks +# Ubuntu: http://bugs.launchpad.net/bugs/55963 +# Upstream: http://bugzilla.gnome.org/show_bug.cgi?id=499327 +diff -Nur gnome-control-center-2.19.1/capplets/default-applications/gnome-default-applications.xml.in gnome-control-center-2.19.1.new/capplets/default-applications/gnome-default-applications.xml.in +--- gnome-control-center-2.19.1/capplets/default-applications/gnome-default-applications.xml.in 2007-05-02 17:39:17.000000000 +0200 ++++ gnome-control-center-2.19.1.new/capplets/default-applications/gnome-default-applications.xml.in 2007-05-02 17:40:38.000000000 +0200 +@@ -82,26 +82,6 @@ + iceweasel -remote "openurl(%s,new-window)" + + +- <_name>Mozilla 1.6 +- mozilla-1.6 +- mozilla-1.6 %s +- mozilla-icon +- false +- true +- mozilla-1.6 -remote "openurl(%s,new-tab)" +- mozilla-1.6 -remote "openurl(%s,new-window)" +- +- +- <_name>Mozilla +- mozilla +- mozilla %s +- mozilla-icon +- false +- true +- mozilla -remote "openurl(%s,new-tab)" +- mozilla -remote "openurl(%s,new-window)" +- +- + <_name>SeaMonkey + seamonkey + seamonkey %s +@@ -241,13 +206,6 @@ + false + + +- <_name>Mozilla Mail +- mozilla +- mozilla -mail %s +- mozilla-mail-icon +- false +- +- + <_name>SeaMonkey Mail + seamonkey + seamonkey -mail %s --- gnome-control-center-2.24.0.1.orig/debian/patches/01_remove_debian_default_applications.patch +++ gnome-control-center-2.24.0.1/debian/patches/01_remove_debian_default_applications.patch @@ -0,0 +1,35 @@ +# Description: remove the Debian entries from the default applications. +# UbuntuSpecific: these are for Debian, this patch removes them. +# +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.22.1/capplets/default-applications/gnome-default-applications.xml.in gnome-control-center-2.22.1.new/capplets/default-applications/gnome-default-applications.xml.in +--- gnome-control-center-2.22.1/capplets/default-applications/gnome-default-applications.xml.in 2008-04-11 16:44:46.000000000 +0100 ++++ gnome-control-center-2.22.1.new/capplets/default-applications/gnome-default-applications.xml.in 2008-04-14 15:57:42.000000000 +0100 +@@ -16,14 +16,6 @@ + opera -newwindow %s + + +- <_name>Debian Sensible Browser +- sensible-browser +- sensible-browser %s +- +- false +- false +- +- + <_name>Epiphany Web Browser + epiphany + epiphany %s +@@ -245,13 +237,6 @@ + + + +- <_name>Debian Terminal Emulator +- x-terminal-emulator +- x-terminal-emulator +- gnome-mime-application-x-executable +- -e +- +- + <_name>GNOME Terminal + gnome-terminal + gnome-terminal --- gnome-control-center-2.24.0.1.orig/debian/patches/99_autoreconf.patch +++ gnome-control-center-2.24.0.1/debian/patches/99_autoreconf.patch @@ -0,0 +1,27244 @@ +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.24.0.1/aclocal.m4 gnome-control-center-2.24.0.1.new/aclocal.m4 +--- gnome-control-center-2.24.0.1/aclocal.m4 2008-09-24 21:58:34.000000000 +0200 ++++ gnome-control-center-2.24.0.1.new/aclocal.m4 2008-09-24 21:58:43.000000000 +0200 +@@ -13,4447 +13,3529 @@ + + m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +-m4_if(AC_AUTOCONF_VERSION, [2.62],, +-[m4_warning([this file was generated for autoconf 2.62. ++m4_if(AC_AUTOCONF_VERSION, [2.61],, ++[m4_warning([this file was generated for autoconf 2.61. + You have another version of autoconf. It may work, but is not guaranteed to. + If you have problems, you may need to regenerate the build system entirely. + To do so, use the procedure documented by the package, typically `autoreconf'.])]) + +-# Copyright (C) 2002, 2003, 2005, 2006, 2007 Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++dnl AM_GCONF_SOURCE_2 ++dnl Defines GCONF_SCHEMA_CONFIG_SOURCE which is where you should install schemas ++dnl (i.e. pass to gconftool-2 ++dnl Defines GCONF_SCHEMA_FILE_DIR which is a filesystem directory where ++dnl you should install foo.schemas files ++dnl + +-# AM_AUTOMAKE_VERSION(VERSION) +-# ---------------------------- +-# Automake X.Y traces this macro to ensure aclocal.m4 has been +-# generated from the m4 files accompanying Automake X.Y. +-# (This private macro should not be called outside this file.) +-AC_DEFUN([AM_AUTOMAKE_VERSION], +-[am__api_version='1.10' +-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +-dnl require some minimum version. Point them to the right macro. +-m4_if([$1], [1.10.1], [], +- [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +-]) ++AC_DEFUN([AM_GCONF_SOURCE_2], ++[ ++ if test "x$GCONF_SCHEMA_INSTALL_SOURCE" = "x"; then ++ GCONF_SCHEMA_CONFIG_SOURCE=`gconftool-2 --get-default-source` ++ else ++ GCONF_SCHEMA_CONFIG_SOURCE=$GCONF_SCHEMA_INSTALL_SOURCE ++ fi + +-# _AM_AUTOCONF_VERSION(VERSION) +-# ----------------------------- +-# aclocal traces this macro to find the Autoconf version. +-# This is a private macro too. Using m4_define simplifies +-# the logic in aclocal, which can simply ignore this definition. +-m4_define([_AM_AUTOCONF_VERSION], []) ++ AC_ARG_WITH([gconf-source], ++ AC_HELP_STRING([--with-gconf-source=sourceaddress], ++ [Config database for installing schema files.]), ++ [GCONF_SCHEMA_CONFIG_SOURCE="$withval"],) + +-# AM_SET_CURRENT_AUTOMAKE_VERSION +-# ------------------------------- +-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. +-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. +-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +-[AM_AUTOMAKE_VERSION([1.10.1])dnl +-m4_ifndef([AC_AUTOCONF_VERSION], +- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +-_AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)]) ++ AC_SUBST(GCONF_SCHEMA_CONFIG_SOURCE) ++ AC_MSG_RESULT([Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation]) + +-# AM_AUX_DIR_EXPAND -*- Autoconf -*- ++ if test "x$GCONF_SCHEMA_FILE_DIR" = "x"; then ++ GCONF_SCHEMA_FILE_DIR='$(sysconfdir)/gconf/schemas' ++ fi + +-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++ AC_ARG_WITH([gconf-schema-file-dir], ++ AC_HELP_STRING([--with-gconf-schema-file-dir=dir], ++ [Directory for installing schema files.]), ++ [GCONF_SCHEMA_FILE_DIR="$withval"],) + +-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +-# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to +-# `$srcdir', `$srcdir/..', or `$srcdir/../..'. ++ AC_SUBST(GCONF_SCHEMA_FILE_DIR) ++ AC_MSG_RESULT([Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files]) ++ ++ AC_ARG_ENABLE(schemas-install, ++ [ --disable-schemas-install Disable the schemas installation], ++ [case ${enableval} in ++ yes|no) ;; ++ *) AC_MSG_ERROR(bad value ${enableval} for --enable-schemas-install) ;; ++ esac]) ++ AM_CONDITIONAL([GCONF_SCHEMAS_INSTALL], [test "$enable_schemas_install" != no]) ++]) ++ ++# Copyright (C) 1995-2002 Free Software Foundation, Inc. ++# Copyright (C) 2001-2003,2004 Red Hat, Inc. + # +-# Of course, Automake must honor this variable whenever it calls a +-# tool from the auxiliary directory. The problem is that $srcdir (and +-# therefore $ac_aux_dir as well) can be either absolute or relative, +-# depending on how configure is run. This is pretty annoying, since +-# it makes $ac_aux_dir quite unusable in subdirectories: in the top +-# source directory, any form will work fine, but in subdirectories a +-# relative path needs to be adjusted first. ++# This file is free software, distributed under the terms of the GNU ++# General Public License. As a special exception to the GNU General ++# Public License, this file may be distributed as part of a program ++# that contains a configuration script generated by Autoconf, under ++# the same distribution terms as the rest of that program. + # +-# $ac_aux_dir/missing +-# fails when called from a subdirectory if $ac_aux_dir is relative +-# $top_srcdir/$ac_aux_dir/missing +-# fails if $ac_aux_dir is absolute, +-# fails when called from a subdirectory in a VPATH build with +-# a relative $ac_aux_dir ++# This file can be copied and used freely without restrictions. It can ++# be used in projects which are not available under the GNU Public License ++# but which still want to provide support for the GNU gettext functionality. + # +-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +-# are both prefixed by $srcdir. In an in-source build this is usually +-# harmless because $srcdir is `.', but things will broke when you +-# start a VPATH build or use an absolute $srcdir. ++# Macro to add for using GNU gettext. ++# Ulrich Drepper , 1995, 1996 + # +-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +-# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +-# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +-# and then we would define $MISSING as +-# MISSING="\${SHELL} $am_aux_dir/missing" +-# This will work as long as MISSING is not called from configure, because +-# unfortunately $(top_srcdir) has no meaning in configure. +-# However there are other variables, like CC, which are often used in +-# configure, and could therefore not use this "fixed" $ac_aux_dir. ++# Modified to never use included libintl. ++# Owen Taylor , 12/15/1998 + # +-# Another solution, used here, is to always expand $ac_aux_dir to an +-# absolute PATH. The drawback is that using absolute paths prevent a +-# configured tree to be moved without reconfiguration. +- +-AC_DEFUN([AM_AUX_DIR_EXPAND], +-[dnl Rely on autoconf to set up CDPATH properly. +-AC_PREREQ([2.50])dnl +-# expand $ac_aux_dir to an absolute path +-am_aux_dir=`cd $ac_aux_dir && pwd` +-]) +- +-# AM_CONDITIONAL -*- Autoconf -*- +- +-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006 +-# Free Software Foundation, Inc. ++# Major rework to remove unused code ++# Owen Taylor , 12/11/2002 + # +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++# Added better handling of ALL_LINGUAS from GNU gettext version ++# written by Bruno Haible, Owen Taylor 5/30/3002 ++# ++# Modified to require ngettext ++# Matthias Clasen 08/06/2004 ++# ++# We need this here as well, since someone might use autoconf-2.5x ++# to configure GLib then an older version to configure a package ++# using AM_GLIB_GNU_GETTEXT ++AC_PREREQ(2.53) + +-# serial 8 ++dnl ++dnl We go to great lengths to make sure that aclocal won't ++dnl try to pull in the installed version of these macros ++dnl when running aclocal in the glib directory. ++dnl ++m4_copy([AC_DEFUN],[glib_DEFUN]) ++m4_copy([AC_REQUIRE],[glib_REQUIRE]) ++dnl ++dnl At the end, if we're not within glib, we'll define the public ++dnl definitions in terms of our private definitions. ++dnl + +-# AM_CONDITIONAL(NAME, SHELL-CONDITION) +-# ------------------------------------- +-# Define a conditional. +-AC_DEFUN([AM_CONDITIONAL], +-[AC_PREREQ(2.52)dnl +- ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], +- [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +-AC_SUBST([$1_TRUE])dnl +-AC_SUBST([$1_FALSE])dnl +-_AM_SUBST_NOTMAKE([$1_TRUE])dnl +-_AM_SUBST_NOTMAKE([$1_FALSE])dnl +-if $2; then +- $1_TRUE= +- $1_FALSE='#' ++# GLIB_LC_MESSAGES ++#-------------------- ++glib_DEFUN([GLIB_LC_MESSAGES], ++ [AC_CHECK_HEADERS([locale.h]) ++ if test $ac_cv_header_locale_h = yes; then ++ AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, ++ [AC_TRY_LINK([#include ], [return LC_MESSAGES], ++ am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) ++ if test $am_cv_val_LC_MESSAGES = yes; then ++ AC_DEFINE(HAVE_LC_MESSAGES, 1, ++ [Define if your file defines LC_MESSAGES.]) ++ fi ++ fi]) ++ ++# GLIB_PATH_PROG_WITH_TEST ++#---------------------------- ++dnl GLIB_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, ++dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) ++glib_DEFUN([GLIB_PATH_PROG_WITH_TEST], ++[# Extract the first word of "$2", so it can be a program name with args. ++set dummy $2; ac_word=[$]2 ++AC_MSG_CHECKING([for $ac_word]) ++AC_CACHE_VAL(ac_cv_path_$1, ++[case "[$]$1" in ++ /*) ++ ac_cv_path_$1="[$]$1" # Let the user override the test with a path. ++ ;; ++ *) ++ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" ++ for ac_dir in ifelse([$5], , $PATH, [$5]); do ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$ac_word; then ++ if [$3]; then ++ ac_cv_path_$1="$ac_dir/$ac_word" ++ break ++ fi ++ fi ++ done ++ IFS="$ac_save_ifs" ++dnl If no 4th arg is given, leave the cache variable unset, ++dnl so AC_PATH_PROGS will keep looking. ++ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" ++])dnl ++ ;; ++esac])dnl ++$1="$ac_cv_path_$1" ++if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then ++ AC_MSG_RESULT([$]$1) + else +- $1_TRUE='#' +- $1_FALSE= ++ AC_MSG_RESULT(no) + fi +-AC_CONFIG_COMMANDS_PRE( +-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then +- AC_MSG_ERROR([[conditional "$1" was never defined. +-Usually this means the macro was only invoked conditionally.]]) +-fi])]) +- +-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 +-# Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++AC_SUBST($1)dnl ++]) + +-# serial 9 ++# GLIB_WITH_NLS ++#----------------- ++glib_DEFUN([GLIB_WITH_NLS], ++ dnl NLS is obligatory ++ [USE_NLS=yes ++ AC_SUBST(USE_NLS) + +-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be +-# written in clear, in which case automake, when reading aclocal.m4, +-# will think it sees a *use*, and therefore will trigger all it's +-# C support machinery. Also note that it means that autoscan, seeing +-# CC etc. in the Makefile, will ask for an AC_PROG_CC use... ++ gt_cv_have_gettext=no + ++ CATOBJEXT=NONE ++ XGETTEXT=: ++ INTLLIBS= + +-# _AM_DEPENDENCIES(NAME) +-# ---------------------- +-# See how the compiler implements dependency checking. +-# NAME is "CC", "CXX", "GCJ", or "OBJC". +-# We try a few techniques and use that to set a single cache variable. +-# +-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +-# dependency, and given that the user is not expected to run this macro, +-# just rely on AC_PROG_CC. +-AC_DEFUN([_AM_DEPENDENCIES], +-[AC_REQUIRE([AM_SET_DEPDIR])dnl +-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +-AC_REQUIRE([AM_MAKE_INCLUDE])dnl +-AC_REQUIRE([AM_DEP_TRACK])dnl +- +-ifelse([$1], CC, [depcc="$CC" am_compiler_list=], +- [$1], CXX, [depcc="$CXX" am_compiler_list=], +- [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], +- [$1], UPC, [depcc="$UPC" am_compiler_list=], +- [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], +- [depcc="$$1" am_compiler_list=]) +- +-AC_CACHE_CHECK([dependency style of $depcc], +- [am_cv_$1_dependencies_compiler_type], +-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then +- # We make a subdir and do the tests there. Otherwise we can end up +- # making bogus files that we don't know about and never remove. For +- # instance it was reported that on HP-UX the gcc test will end up +- # making a dummy file named `D' -- because `-MD' means `put the output +- # in D'. +- mkdir conftest.dir +- # Copy depcomp to subdir because otherwise we won't find it if we're +- # using a relative directory. +- cp "$am_depcomp" conftest.dir +- cd conftest.dir +- # We will build objects and dependencies in a subdirectory because +- # it helps to detect inapplicable dependency modes. For instance +- # both Tru64's cc and ICC support -MD to output dependencies as a +- # side effect of compilation, but ICC will put the dependencies in +- # the current directory while Tru64 will put them in the object +- # directory. +- mkdir sub +- +- am_cv_$1_dependencies_compiler_type=none +- if test "$am_compiler_list" = ""; then +- am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` +- fi +- for depmode in $am_compiler_list; do +- # Setup a source with many dependencies, because some compilers +- # like to wrap large dependency lists on column 80 (with \), and +- # we should not choose a depcomp mode which is confused by this. +- # +- # We need to recreate these files for each test, as the compiler may +- # overwrite some of them when testing with obscure command lines. +- # This happens at least with the AIX C compiler. +- : > sub/conftest.c +- for i in 1 2 3 4 5 6; do +- echo '#include "conftst'$i'.h"' >> sub/conftest.c +- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with +- # Solaris 8's {/usr,}/bin/sh. +- touch sub/conftst$i.h +- done +- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf ++ AC_CHECK_HEADER(libintl.h, ++ [gt_cv_func_dgettext_libintl="no" ++ libintl_extra_libs="" + +- case $depmode in +- nosideeffect) +- # after this tag, mechanisms are not by side-effect, so they'll +- # only be used when explicitly requested +- if test "x$enable_dependency_tracking" = xyes; then +- continue +- else +- break ++ # ++ # First check in libc ++ # ++ AC_CACHE_CHECK([for ngettext in libc], gt_cv_func_ngettext_libc, ++ [AC_TRY_LINK([ ++#include ++], ++ [return !ngettext ("","", 1)], ++ gt_cv_func_ngettext_libc=yes, ++ gt_cv_func_ngettext_libc=no) ++ ]) ++ ++ if test "$gt_cv_func_ngettext_libc" = "yes" ; then ++ AC_CACHE_CHECK([for dgettext in libc], gt_cv_func_dgettext_libc, ++ [AC_TRY_LINK([ ++#include ++], ++ [return !dgettext ("","")], ++ gt_cv_func_dgettext_libc=yes, ++ gt_cv_func_dgettext_libc=no) ++ ]) + fi +- ;; +- none) break ;; +- esac +- # We check with `-c' and `-o' for the sake of the "dashmstdout" +- # mode. It turns out that the SunPro C++ compiler does not properly +- # handle `-M -o', and we need to detect this. +- if depmode=$depmode \ +- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ +- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ +- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ +- >/dev/null 2>conftest.err && +- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && +- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && +- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && +- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then +- # icc doesn't choke on unknown options, it will just issue warnings +- # or remarks (even with -Werror). So we grep stderr for any message +- # that says an option was ignored or not supported. +- # When given -MP, icc 7.0 and 7.1 complain thusly: +- # icc: Command line warning: ignoring option '-M'; no argument required +- # The diagnosis changed in icc 8.0: +- # icc: Command line remark: option '-MP' not supported +- if (grep 'ignoring option' conftest.err || +- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else +- am_cv_$1_dependencies_compiler_type=$depmode +- break ++ ++ if test "$gt_cv_func_ngettext_libc" = "yes" ; then ++ AC_CHECK_FUNCS(bind_textdomain_codeset) + fi +- fi +- done +- +- cd .. +- rm -rf conftest.dir +-else +- am_cv_$1_dependencies_compiler_type=none +-fi +-]) +-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +-AM_CONDITIONAL([am__fastdep$1], [ +- test "x$enable_dependency_tracking" != xno \ +- && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +-]) +- +- +-# AM_SET_DEPDIR +-# ------------- +-# Choose a directory name for dependency files. +-# This macro is AC_REQUIREd in _AM_DEPENDENCIES +-AC_DEFUN([AM_SET_DEPDIR], +-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +-]) +- + +-# AM_DEP_TRACK +-# ------------ +-AC_DEFUN([AM_DEP_TRACK], +-[AC_ARG_ENABLE(dependency-tracking, +-[ --disable-dependency-tracking speeds up one-time build +- --enable-dependency-tracking do not reject slow dependency extractors]) +-if test "x$enable_dependency_tracking" != xno; then +- am_depcomp="$ac_aux_dir/depcomp" +- AMDEPBACKSLASH='\' +-fi +-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +-AC_SUBST([AMDEPBACKSLASH])dnl +-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl +-]) ++ # ++ # If we don't have everything we want, check in libintl ++ # ++ if test "$gt_cv_func_dgettext_libc" != "yes" \ ++ || test "$gt_cv_func_ngettext_libc" != "yes" \ ++ || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then ++ ++ AC_CHECK_LIB(intl, bindtextdomain, ++ [AC_CHECK_LIB(intl, ngettext, ++ [AC_CHECK_LIB(intl, dgettext, ++ gt_cv_func_dgettext_libintl=yes)])]) + +-# Generate code to set up dependency tracking. -*- Autoconf -*- ++ if test "$gt_cv_func_dgettext_libintl" != "yes" ; then ++ AC_MSG_CHECKING([if -liconv is needed to use gettext]) ++ AC_MSG_RESULT([]) ++ AC_CHECK_LIB(intl, ngettext, ++ [AC_CHECK_LIB(intl, dcgettext, ++ [gt_cv_func_dgettext_libintl=yes ++ libintl_extra_libs=-liconv], ++ :,-liconv)], ++ :,-liconv) ++ fi + +-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 +-# Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++ # ++ # If we found libintl, then check in it for bind_textdomain_codeset(); ++ # we'll prefer libc if neither have bind_textdomain_codeset(), ++ # and both have dgettext and ngettext ++ # ++ if test "$gt_cv_func_dgettext_libintl" = "yes" ; then ++ glib_save_LIBS="$LIBS" ++ LIBS="$LIBS -lintl $libintl_extra_libs" ++ unset ac_cv_func_bind_textdomain_codeset ++ AC_CHECK_FUNCS(bind_textdomain_codeset) ++ LIBS="$glib_save_LIBS" + +-#serial 3 ++ if test "$ac_cv_func_bind_textdomain_codeset" = "yes" ; then ++ gt_cv_func_dgettext_libc=no ++ else ++ if test "$gt_cv_func_dgettext_libc" = "yes" \ ++ && test "$gt_cv_func_ngettext_libc" = "yes"; then ++ gt_cv_func_dgettext_libintl=no ++ fi ++ fi ++ fi ++ fi + +-# _AM_OUTPUT_DEPENDENCY_COMMANDS +-# ------------------------------ +-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +-[for mf in $CONFIG_FILES; do +- # Strip MF so we end up with the name of the file. +- mf=`echo "$mf" | sed -e 's/:.*$//'` +- # Check whether this is an Automake generated Makefile or not. +- # We used to match only the files named `Makefile.in', but +- # some people rename them; so instead we look at the file content. +- # Grep'ing the first line is not enough: some people post-process +- # each Makefile.in and add a new line on top of each file to say so. +- # Grep'ing the whole file is not good either: AIX grep has a line +- # limit of 2048, but all sed's we know have understand at least 4000. +- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then +- dirpart=`AS_DIRNAME("$mf")` +- else +- continue +- fi +- # Extract the definition of DEPDIR, am__include, and am__quote +- # from the Makefile without running `make'. +- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` +- test -z "$DEPDIR" && continue +- am__include=`sed -n 's/^am__include = //p' < "$mf"` +- test -z "am__include" && continue +- am__quote=`sed -n 's/^am__quote = //p' < "$mf"` +- # When using ansi2knr, U may be empty or an underscore; expand it +- U=`sed -n 's/^U = //p' < "$mf"` +- # Find all dependency output files, they are included files with +- # $(DEPDIR) in their names. We invoke sed twice because it is the +- # simplest approach to changing $(DEPDIR) to its actual value in the +- # expansion. +- for file in `sed -n " +- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ +- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do +- # Make sure the directory exists. +- test -f "$dirpart/$file" && continue +- fdir=`AS_DIRNAME(["$file"])` +- AS_MKDIR_P([$dirpart/$fdir]) +- # echo "creating $dirpart/$file" +- echo '# dummy' > "$dirpart/$file" +- done +-done +-])# _AM_OUTPUT_DEPENDENCY_COMMANDS ++ if test "$gt_cv_func_dgettext_libc" = "yes" \ ++ || test "$gt_cv_func_dgettext_libintl" = "yes"; then ++ gt_cv_have_gettext=yes ++ fi ++ ++ if test "$gt_cv_func_dgettext_libintl" = "yes"; then ++ INTLLIBS="-lintl $libintl_extra_libs" ++ fi ++ ++ if test "$gt_cv_have_gettext" = "yes"; then ++ AC_DEFINE(HAVE_GETTEXT,1, ++ [Define if the GNU gettext() function is already present or preinstalled.]) ++ GLIB_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, ++ [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl ++ if test "$MSGFMT" != "no"; then ++ glib_save_LIBS="$LIBS" ++ LIBS="$LIBS $INTLLIBS" ++ AC_CHECK_FUNCS(dcgettext) ++ MSGFMT_OPTS= ++ AC_MSG_CHECKING([if msgfmt accepts -c]) ++ GLIB_RUN_PROG([$MSGFMT -c -o /dev/null],[ ++msgid "" ++msgstr "" ++"Content-Type: text/plain; charset=UTF-8\n" ++"Project-Id-Version: test 1.0\n" ++"PO-Revision-Date: 2007-02-15 12:01+0100\n" ++"Last-Translator: test \n" ++"Language-Team: C \n" ++"MIME-Version: 1.0\n" ++"Content-Transfer-Encoding: 8bit\n" ++], [MSGFMT_OPTS=-c; AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no])]) ++ AC_SUBST(MSGFMT_OPTS) ++ AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) ++ GLIB_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, ++ [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) ++ AC_TRY_LINK(, [extern int _nl_msg_cat_cntr; ++ return _nl_msg_cat_cntr], ++ [CATOBJEXT=.gmo ++ DATADIRNAME=share], ++ [case $host in ++ *-*-solaris*) ++ dnl On Solaris, if bind_textdomain_codeset is in libc, ++ dnl GNU format message catalog is always supported, ++ dnl since both are added to the libc all together. ++ dnl Hence, we'd like to go with DATADIRNAME=share and ++ dnl and CATOBJEXT=.gmo in this case. ++ AC_CHECK_FUNC(bind_textdomain_codeset, ++ [CATOBJEXT=.gmo ++ DATADIRNAME=share], ++ [CATOBJEXT=.mo ++ DATADIRNAME=lib]) ++ ;; ++ *) ++ CATOBJEXT=.mo ++ DATADIRNAME=lib ++ ;; ++ esac]) ++ LIBS="$glib_save_LIBS" ++ INSTOBJEXT=.mo ++ else ++ gt_cv_have_gettext=no ++ fi ++ fi ++ ]) + ++ if test "$gt_cv_have_gettext" = "yes" ; then ++ AC_DEFINE(ENABLE_NLS, 1, ++ [always defined to indicate that i18n is enabled]) ++ fi + +-# AM_OUTPUT_DEPENDENCY_COMMANDS +-# ----------------------------- +-# This macro should only be invoked once -- use via AC_REQUIRE. +-# +-# This code is only required when automatic dependency tracking +-# is enabled. FIXME. This creates each `.P' file that we will +-# need in order to bootstrap the dependency handling code. +-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +-[AC_CONFIG_COMMANDS([depfiles], +- [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], +- [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +-]) ++ dnl Test whether we really found GNU xgettext. ++ if test "$XGETTEXT" != ":"; then ++ dnl If it is not GNU xgettext we define it as : so that the ++ dnl Makefiles still can work. ++ if $XGETTEXT --omit-header /dev/null 2> /dev/null; then ++ : ; ++ else ++ AC_MSG_RESULT( ++ [found xgettext program is not GNU xgettext; ignore it]) ++ XGETTEXT=":" ++ fi ++ fi + +-# Do all the work for Automake. -*- Autoconf -*- ++ # We need to process the po/ directory. ++ POSUB=po + +-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +-# 2005, 2006, 2008 Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++ AC_OUTPUT_COMMANDS( ++ [case "$CONFIG_FILES" in *po/Makefile.in*) ++ sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile ++ esac]) + +-# serial 13 ++ dnl These rules are solely for the distribution goal. While doing this ++ dnl we only have to keep exactly one list of the available catalogs ++ dnl in configure.in. ++ for lang in $ALL_LINGUAS; do ++ GMOFILES="$GMOFILES $lang.gmo" ++ POFILES="$POFILES $lang.po" ++ done + +-# This macro actually does too much. Some checks are only needed if +-# your package does certain things. But this isn't really a big deal. ++ dnl Make all variables we use known to autoconf. ++ AC_SUBST(CATALOGS) ++ AC_SUBST(CATOBJEXT) ++ AC_SUBST(DATADIRNAME) ++ AC_SUBST(GMOFILES) ++ AC_SUBST(INSTOBJEXT) ++ AC_SUBST(INTLLIBS) ++ AC_SUBST(PO_IN_DATADIR_TRUE) ++ AC_SUBST(PO_IN_DATADIR_FALSE) ++ AC_SUBST(POFILES) ++ AC_SUBST(POSUB) ++ ]) + +-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +-# AM_INIT_AUTOMAKE([OPTIONS]) +-# ----------------------------------------------- +-# The call with PACKAGE and VERSION arguments is the old style +-# call (pre autoconf-2.50), which is being phased out. PACKAGE +-# and VERSION should now be passed to AC_INIT and removed from +-# the call to AM_INIT_AUTOMAKE. +-# We support both call styles for the transition. After +-# the next Automake release, Autoconf can make the AC_INIT +-# arguments mandatory, and then we can depend on a new Autoconf +-# release and drop the old call support. +-AC_DEFUN([AM_INIT_AUTOMAKE], +-[AC_PREREQ([2.60])dnl +-dnl Autoconf wants to disallow AM_ names. We explicitly allow +-dnl the ones we care about. +-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +-AC_REQUIRE([AC_PROG_INSTALL])dnl +-if test "`cd $srcdir && pwd`" != "`pwd`"; then +- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output +- # is not polluted with repeated "-I." +- AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl +- # test to see if srcdir already configured +- if test -f $srcdir/config.status; then +- AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) +- fi +-fi ++# AM_GLIB_GNU_GETTEXT ++# ------------------- ++# Do checks necessary for use of gettext. If a suitable implementation ++# of gettext is found in either in libintl or in the C library, ++# it will set INTLLIBS to the libraries needed for use of gettext ++# and AC_DEFINE() HAVE_GETTEXT and ENABLE_NLS. (The shell variable ++# gt_cv_have_gettext will be set to "yes".) It will also call AC_SUBST() ++# on various variables needed by the Makefile.in.in installed by ++# glib-gettextize. ++dnl ++glib_DEFUN([GLIB_GNU_GETTEXT], ++ [AC_REQUIRE([AC_PROG_CC])dnl ++ AC_REQUIRE([AC_HEADER_STDC])dnl ++ ++ GLIB_LC_MESSAGES ++ GLIB_WITH_NLS + +-# test whether we have cygpath +-if test -z "$CYGPATH_W"; then +- if (cygpath --version) >/dev/null 2>/dev/null; then +- CYGPATH_W='cygpath -w' +- else +- CYGPATH_W=echo +- fi +-fi +-AC_SUBST([CYGPATH_W]) ++ if test "$gt_cv_have_gettext" = "yes"; then ++ if test "x$ALL_LINGUAS" = "x"; then ++ LINGUAS= ++ else ++ AC_MSG_CHECKING(for catalogs to be installed) ++ NEW_LINGUAS= ++ for presentlang in $ALL_LINGUAS; do ++ useit=no ++ if test "%UNSET%" != "${LINGUAS-%UNSET%}"; then ++ desiredlanguages="$LINGUAS" ++ else ++ desiredlanguages="$ALL_LINGUAS" ++ fi ++ for desiredlang in $desiredlanguages; do ++ # Use the presentlang catalog if desiredlang is ++ # a. equal to presentlang, or ++ # b. a variant of presentlang (because in this case, ++ # presentlang can be used as a fallback for messages ++ # which are not translated in the desiredlang catalog). ++ case "$desiredlang" in ++ "$presentlang"*) useit=yes;; ++ esac ++ done ++ if test $useit = yes; then ++ NEW_LINGUAS="$NEW_LINGUAS $presentlang" ++ fi ++ done ++ LINGUAS=$NEW_LINGUAS ++ AC_MSG_RESULT($LINGUAS) ++ fi + +-# Define the identity of the package. +-dnl Distinguish between old-style and new-style calls. +-m4_ifval([$2], +-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl +- AC_SUBST([PACKAGE], [$1])dnl +- AC_SUBST([VERSION], [$2])], +-[_AM_SET_OPTIONS([$1])dnl +-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, +- [m4_fatal([AC_INIT should be called with package and version arguments])])dnl +- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl +- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl ++ dnl Construct list of names of catalog files to be constructed. ++ if test -n "$LINGUAS"; then ++ for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done ++ fi ++ fi + +-_AM_IF_OPTION([no-define],, +-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) +- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl ++ dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly ++ dnl find the mkinstalldirs script in another subdir but ($top_srcdir). ++ dnl Try to locate is. ++ MKINSTALLDIRS= ++ if test -n "$ac_aux_dir"; then ++ MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" ++ fi ++ if test -z "$MKINSTALLDIRS"; then ++ MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" ++ fi ++ AC_SUBST(MKINSTALLDIRS) + +-# Some tools Automake needs. +-AC_REQUIRE([AM_SANITY_CHECK])dnl +-AC_REQUIRE([AC_ARG_PROGRAM])dnl +-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) +-AM_MISSING_PROG(AUTOCONF, autoconf) +-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) +-AM_MISSING_PROG(AUTOHEADER, autoheader) +-AM_MISSING_PROG(MAKEINFO, makeinfo) +-AM_PROG_INSTALL_SH +-AM_PROG_INSTALL_STRIP +-AC_REQUIRE([AM_PROG_MKDIR_P])dnl +-# We need awk for the "check" target. The system "awk" is bad on +-# some platforms. +-AC_REQUIRE([AC_PROG_AWK])dnl +-AC_REQUIRE([AC_PROG_MAKE_SET])dnl +-AC_REQUIRE([AM_SET_LEADING_DOT])dnl +-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], +- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], +- [_AM_PROG_TAR([v7])])]) +-_AM_IF_OPTION([no-dependencies],, +-[AC_PROVIDE_IFELSE([AC_PROG_CC], +- [_AM_DEPENDENCIES(CC)], +- [define([AC_PROG_CC], +- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl +-AC_PROVIDE_IFELSE([AC_PROG_CXX], +- [_AM_DEPENDENCIES(CXX)], +- [define([AC_PROG_CXX], +- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl +-AC_PROVIDE_IFELSE([AC_PROG_OBJC], +- [_AM_DEPENDENCIES(OBJC)], +- [define([AC_PROG_OBJC], +- defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl +-]) ++ dnl Generate list of files to be processed by xgettext which will ++ dnl be included in po/Makefile. ++ test -d po || mkdir po ++ if test "x$srcdir" != "x."; then ++ if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then ++ posrcprefix="$srcdir/" ++ else ++ posrcprefix="../$srcdir/" ++ fi ++ else ++ posrcprefix="../" ++ fi ++ rm -f po/POTFILES ++ sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ ++ < $srcdir/po/POTFILES.in > po/POTFILES ++ ]) ++ ++# AM_GLIB_DEFINE_LOCALEDIR(VARIABLE) ++# ------------------------------- ++# Define VARIABLE to the location where catalog files will ++# be installed by po/Makefile. ++glib_DEFUN([GLIB_DEFINE_LOCALEDIR], ++[glib_REQUIRE([GLIB_GNU_GETTEXT])dnl ++glib_save_prefix="$prefix" ++glib_save_exec_prefix="$exec_prefix" ++glib_save_datarootdir="$datarootdir" ++test "x$prefix" = xNONE && prefix=$ac_default_prefix ++test "x$exec_prefix" = xNONE && exec_prefix=$prefix ++datarootdir=`eval echo "${datarootdir}"` ++if test "x$CATOBJEXT" = "x.mo" ; then ++ localedir=`eval echo "${libdir}/locale"` ++else ++ localedir=`eval echo "${datadir}/locale"` ++fi ++prefix="$glib_save_prefix" ++exec_prefix="$glib_save_exec_prefix" ++datarootdir="$glib_save_datarootdir" ++AC_DEFINE_UNQUOTED($1, "$localedir", ++ [Define the location where the catalogs will be installed]) + ]) + ++dnl ++dnl Now the definitions that aclocal will find ++dnl ++ifdef(glib_configure_in,[],[ ++AC_DEFUN([AM_GLIB_GNU_GETTEXT],[GLIB_GNU_GETTEXT($@)]) ++AC_DEFUN([AM_GLIB_DEFINE_LOCALEDIR],[GLIB_DEFINE_LOCALEDIR($@)]) ++])dnl + +-# When config.status generates a header, we must update the stamp-h file. +-# This file resides in the same directory as the config header +-# that is generated. The stamp files are numbered to have different names. ++# GLIB_RUN_PROG(PROGRAM, TEST-FILE, [ACTION-IF-PASS], [ACTION-IF-FAIL]) ++# ++# Create a temporary file with TEST-FILE as its contents and pass the ++# file name to PROGRAM. Perform ACTION-IF-PASS if PROGRAM exits with ++# 0 and perform ACTION-IF-FAIL for any other exit status. ++AC_DEFUN([GLIB_RUN_PROG], ++[cat >conftest.foo <<_ACEOF ++$2 ++_ACEOF ++if AC_RUN_LOG([$1 conftest.foo]); then ++ m4_ifval([$3], [$3], [:]) ++m4_ifvaln([$4], [else $4])dnl ++echo "$as_me: failed input was:" >&AS_MESSAGE_LOG_FD ++sed 's/^/| /' conftest.foo >&AS_MESSAGE_LOG_FD ++fi]) + +-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +-# loop where config.status creates the headers, so we can generate +-# our stamp files there. +-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +-[# Compute $1's index in $config_headers. +-_am_arg=$1 +-_am_stamp_count=1 +-for _am_header in $config_headers :; do +- case $_am_header in +- $_am_arg | $_am_arg:* ) +- break ;; +- * ) +- _am_stamp_count=`expr $_am_stamp_count + 1` ;; +- esac +-done +-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) + +-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++# gnome-common.m4 ++# + +-# AM_PROG_INSTALL_SH +-# ------------------ +-# Define $install_sh. +-AC_DEFUN([AM_PROG_INSTALL_SH], +-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +-install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} +-AC_SUBST(install_sh)]) ++dnl GNOME_COMMON_INIT + +-# Copyright (C) 2003, 2005 Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++AC_DEFUN([GNOME_COMMON_INIT], ++[ ++ dnl this macro should come after AC_CONFIG_MACRO_DIR ++ AC_BEFORE([AC_CONFIG_MACRO_DIR], [$0]) + +-# serial 2 ++ dnl ensure that when the Automake generated makefile calls aclocal, ++ dnl it honours the $ACLOCAL_FLAGS environment variable ++ ACLOCAL_AMFLAGS="\${ACLOCAL_FLAGS}" ++ if test -n "$ac_macro_dir"; then ++ ACLOCAL_AMFLAGS="-I $ac_macro_dir $ACLOCAL_AMFLAGS" ++ fi + +-# Check whether the underlying file-system supports filenames +-# with a leading dot. For instance MS-DOS doesn't. +-AC_DEFUN([AM_SET_LEADING_DOT], +-[rm -rf .tst 2>/dev/null +-mkdir .tst 2>/dev/null +-if test -d .tst; then +- am__leading_dot=. +-else +- am__leading_dot=_ +-fi +-rmdir .tst 2>/dev/null +-AC_SUBST([am__leading_dot])]) ++ AC_SUBST([ACLOCAL_AMFLAGS]) ++]) + +-# Add --enable-maintainer-mode option to configure. -*- Autoconf -*- +-# From Jim Meyering ++AC_DEFUN([GNOME_DEBUG_CHECK], ++[ ++ AC_ARG_ENABLE([debug], ++ AC_HELP_STRING([--enable-debug], ++ [turn on debugging]),, ++ [enable_debug=no]) + +-# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005 +-# Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++ if test x$enable_debug = xyes ; then ++ AC_DEFINE(GNOME_ENABLE_DEBUG, 1, ++ [Enable additional debugging at the expense of performance and size]) ++ fi ++]) + +-# serial 4 ++dnl GNOME_MAINTAINER_MODE_DEFINES () ++dnl define DISABLE_DEPRECATED ++dnl ++AC_DEFUN([GNOME_MAINTAINER_MODE_DEFINES], ++[ ++ AC_REQUIRE([AM_MAINTAINER_MODE]) + +-AC_DEFUN([AM_MAINTAINER_MODE], +-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) +- dnl maintainer-mode is disabled by default +- AC_ARG_ENABLE(maintainer-mode, +-[ --enable-maintainer-mode enable make rules and dependencies not useful +- (and sometimes confusing) to the casual installer], +- USE_MAINTAINER_MODE=$enableval, +- USE_MAINTAINER_MODE=no) +- AC_MSG_RESULT([$USE_MAINTAINER_MODE]) +- AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes]) +- MAINT=$MAINTAINER_MODE_TRUE +- AC_SUBST(MAINT)dnl +-] +-) ++ if test $USE_MAINTAINER_MODE = yes; then ++ DISABLE_DEPRECATED="-DG_DISABLE_DEPRECATED -DGDK_DISABLE_DEPRECATED -DGDK_PIXBUF_DISABLE_DEPRECATED -DPANGO_DISABLE_DEPRECATED -DGTK_DISABLE_DEPRECATED -DGCONF_DISABLE_DEPRECATED -DBONOBO_DISABLE_DEPRECATED -DBONOBO_UI_DISABLE_DEPRECATED -DGNOME_VFS_DISABLE_DEPRECATED -DGNOME_DISABLE_DEPRECATED -DLIBGLADE_DISABLE_DEPRECATED" ++ else ++ DISABLE_DEPRECATED="" ++ fi ++ AC_SUBST(DISABLE_DEPRECATED) ++]) + +-AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE]) ++dnl GNOME_COMPILE_WARNINGS ++dnl Turn on many useful compiler warnings ++dnl For now, only works on GCC ++AC_DEFUN([GNOME_COMPILE_WARNINGS],[ ++ dnl ****************************** ++ dnl More compiler warnings ++ dnl ****************************** + +-# Check to see how 'make' treats includes. -*- Autoconf -*- ++ AC_ARG_ENABLE(compile-warnings, ++ AC_HELP_STRING([--enable-compile-warnings=@<:@no/minimum/yes/maximum/error@:>@], ++ [Turn on compiler warnings]),, ++ [enable_compile_warnings="m4_default([$1],[yes])"]) + +-# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++ warnCFLAGS= ++ if test "x$GCC" != xyes; then ++ enable_compile_warnings=no ++ fi + +-# serial 3 ++ warning_flags= ++ realsave_CFLAGS="$CFLAGS" + +-# AM_MAKE_INCLUDE() +-# ----------------- +-# Check to see how make treats includes. +-AC_DEFUN([AM_MAKE_INCLUDE], +-[am_make=${MAKE-make} +-cat > confinc << 'END' +-am__doit: +- @echo done +-.PHONY: am__doit +-END +-# If we don't find an include directive, just comment out the code. +-AC_MSG_CHECKING([for style of include used by $am_make]) +-am__include="#" +-am__quote= +-_am_result=none +-# First try GNU make style include. +-echo "include confinc" > confmf +-# We grep out `Entering directory' and `Leaving directory' +-# messages which can occur if `w' ends up in MAKEFLAGS. +-# In particular we don't look at `^make:' because GNU make might +-# be invoked under some other name (usually "gmake"), in which +-# case it prints its new name instead of `make'. +-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then +- am__include=include +- am__quote= +- _am_result=GNU +-fi +-# Now try BSD make style include. +-if test "$am__include" = "#"; then +- echo '.include "confinc"' > confmf +- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then +- am__include=.include +- am__quote="\"" +- _am_result=BSD +- fi +-fi +-AC_SUBST([am__include]) +-AC_SUBST([am__quote]) +-AC_MSG_RESULT([$_am_result]) +-rm -f confinc confmf +-]) ++ case "$enable_compile_warnings" in ++ no) ++ warning_flags= ++ ;; ++ minimum) ++ warning_flags="-Wall" ++ ;; ++ yes) ++ warning_flags="-Wall -Wmissing-prototypes" ++ ;; ++ maximum|error) ++ warning_flags="-Wall -Wmissing-prototypes -Wnested-externs -Wpointer-arith" ++ CFLAGS="$warning_flags $CFLAGS" ++ for option in -Wno-sign-compare; do ++ SAVE_CFLAGS="$CFLAGS" ++ CFLAGS="$CFLAGS $option" ++ AC_MSG_CHECKING([whether gcc understands $option]) ++ AC_TRY_COMPILE([], [], ++ has_option=yes, ++ has_option=no,) ++ CFLAGS="$SAVE_CFLAGS" ++ AC_MSG_RESULT($has_option) ++ if test $has_option = yes; then ++ warning_flags="$warning_flags $option" ++ fi ++ unset has_option ++ unset SAVE_CFLAGS ++ done ++ unset option ++ if test "$enable_compile_warnings" = "error" ; then ++ warning_flags="$warning_flags -Werror" ++ fi ++ ;; ++ *) ++ AC_MSG_ERROR(Unknown argument '$enable_compile_warnings' to --enable-compile-warnings) ++ ;; ++ esac ++ CFLAGS="$realsave_CFLAGS" ++ AC_MSG_CHECKING(what warning flags to pass to the C compiler) ++ AC_MSG_RESULT($warning_flags) + +-# Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005 +-# Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++ AC_ARG_ENABLE(iso-c, ++ AC_HELP_STRING([--enable-iso-c], ++ [Try to warn if code is not ISO C ]),, ++ [enable_iso_c=no]) + +-# serial 5 ++ AC_MSG_CHECKING(what language compliance flags to pass to the C compiler) ++ complCFLAGS= ++ if test "x$enable_iso_c" != "xno"; then ++ if test "x$GCC" = "xyes"; then ++ case " $CFLAGS " in ++ *[\ \ ]-ansi[\ \ ]*) ;; ++ *) complCFLAGS="$complCFLAGS -ansi" ;; ++ esac ++ case " $CFLAGS " in ++ *[\ \ ]-pedantic[\ \ ]*) ;; ++ *) complCFLAGS="$complCFLAGS -pedantic" ;; ++ esac ++ fi ++ fi ++ AC_MSG_RESULT($complCFLAGS) + +-# AM_PROG_CC_C_O +-# -------------- +-# Like AC_PROG_CC_C_O, but changed for automake. +-AC_DEFUN([AM_PROG_CC_C_O], +-[AC_REQUIRE([AC_PROG_CC_C_O])dnl +-AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +-AC_REQUIRE_AUX_FILE([compile])dnl +-# FIXME: we rely on the cache variable name because +-# there is no other way. +-set dummy $CC +-ac_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']` +-if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" != yes"; then +- # Losing compiler, so override with the script. +- # FIXME: It is wrong to rewrite CC. +- # But if we don't then we get into trouble of one sort or another. +- # A longer-term fix would be to have automake use am__CC in this case, +- # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" +- CC="$am_aux_dir/compile $CC" +-fi +-dnl Make sure AC_PROG_CC is never called again, or it will override our +-dnl setting of CC. +-m4_define([AC_PROG_CC], +- [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])]) ++ WARN_CFLAGS="$warning_flags $complCFLAGS" ++ AC_SUBST(WARN_CFLAGS) + ]) + +-# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- ++dnl For C++, do basically the same thing. + +-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005 +-# Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++AC_DEFUN([GNOME_CXX_WARNINGS],[ ++ AC_ARG_ENABLE(cxx-warnings, ++ AC_HELP_STRING([--enable-cxx-warnings=@<:@no/minimum/yes@:>@] ++ [Turn on compiler warnings.]),, ++ [enable_cxx_warnings="m4_default([$1],[minimum])"]) + +-# serial 5 ++ AC_MSG_CHECKING(what warning flags to pass to the C++ compiler) ++ warnCXXFLAGS= ++ if test "x$GXX" != xyes; then ++ enable_cxx_warnings=no ++ fi ++ if test "x$enable_cxx_warnings" != "xno"; then ++ if test "x$GXX" = "xyes"; then ++ case " $CXXFLAGS " in ++ *[\ \ ]-Wall[\ \ ]*) ;; ++ *) warnCXXFLAGS="-Wall -Wno-unused" ;; ++ esac + +-# AM_MISSING_PROG(NAME, PROGRAM) +-# ------------------------------ +-AC_DEFUN([AM_MISSING_PROG], +-[AC_REQUIRE([AM_MISSING_HAS_RUN]) +-$1=${$1-"${am_missing_run}$2"} +-AC_SUBST($1)]) ++ ## -W is not all that useful. And it cannot be controlled ++ ## with individual -Wno-xxx flags, unlike -Wall ++ if test "x$enable_cxx_warnings" = "xyes"; then ++ warnCXXFLAGS="$warnCXXFLAGS -Wshadow -Woverloaded-virtual" ++ fi ++ fi ++ fi ++ AC_MSG_RESULT($warnCXXFLAGS) + ++ AC_ARG_ENABLE(iso-cxx, ++ AC_HELP_STRING([--enable-iso-cxx], ++ [Try to warn if code is not ISO C++ ]),, ++ [enable_iso_cxx=no]) + +-# AM_MISSING_HAS_RUN +-# ------------------ +-# Define MISSING if not defined so far and test if it supports --run. +-# If it does, set am_missing_run to use it, otherwise, to nothing. +-AC_DEFUN([AM_MISSING_HAS_RUN], +-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +-AC_REQUIRE_AUX_FILE([missing])dnl +-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +-# Use eval to expand $SHELL +-if eval "$MISSING --run true"; then +- am_missing_run="$MISSING --run " +-else +- am_missing_run= +- AC_MSG_WARN([`missing' script is too old or missing]) +-fi +-]) ++ AC_MSG_CHECKING(what language compliance flags to pass to the C++ compiler) ++ complCXXFLAGS= ++ if test "x$enable_iso_cxx" != "xno"; then ++ if test "x$GXX" = "xyes"; then ++ case " $CXXFLAGS " in ++ *[\ \ ]-ansi[\ \ ]*) ;; ++ *) complCXXFLAGS="$complCXXFLAGS -ansi" ;; ++ esac + +-# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++ case " $CXXFLAGS " in ++ *[\ \ ]-pedantic[\ \ ]*) ;; ++ *) complCXXFLAGS="$complCXXFLAGS -pedantic" ;; ++ esac ++ fi ++ fi ++ AC_MSG_RESULT($complCXXFLAGS) + +-# AM_PROG_MKDIR_P +-# --------------- +-# Check for `mkdir -p'. +-AC_DEFUN([AM_PROG_MKDIR_P], +-[AC_PREREQ([2.60])dnl +-AC_REQUIRE([AC_PROG_MKDIR_P])dnl +-dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, +-dnl while keeping a definition of mkdir_p for backward compatibility. +-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. +-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of +-dnl Makefile.ins that do not define MKDIR_P, so we do our own +-dnl adjustment using top_builddir (which is defined more often than +-dnl MKDIR_P). +-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl +-case $mkdir_p in +- [[\\/$]]* | ?:[[\\/]]*) ;; +- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +-esac ++ WARN_CXXFLAGS="$CXXFLAGS $warnCXXFLAGS $complCXXFLAGS" ++ AC_SUBST(WARN_CXXFLAGS) + ]) + +-# Helper functions for option handling. -*- Autoconf -*- +- +-# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. +- +-# serial 3 ++# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- + +-# _AM_MANGLE_OPTION(NAME) +-# ----------------------- +-AC_DEFUN([_AM_MANGLE_OPTION], +-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) ++# serial 52 Debian 1.5.26-1ubuntu1 AC_PROG_LIBTOOL + +-# _AM_SET_OPTION(NAME) +-# ------------------------------ +-# Set option NAME. Presently that only means defining a flag for this option. +-AC_DEFUN([_AM_SET_OPTION], +-[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) + +-# _AM_SET_OPTIONS(OPTIONS) +-# ---------------------------------- +-# OPTIONS is a space-separated list of Automake options. +-AC_DEFUN([_AM_SET_OPTIONS], +-[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) ++# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) ++# ----------------------------------------------------------- ++# If this macro is not defined by Autoconf, define it here. ++m4_ifdef([AC_PROVIDE_IFELSE], ++ [], ++ [m4_define([AC_PROVIDE_IFELSE], ++ [m4_ifdef([AC_PROVIDE_$1], ++ [$2], [$3])])]) + +-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +-# ------------------------------------------- +-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +-AC_DEFUN([_AM_IF_OPTION], +-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++# AC_PROG_LIBTOOL ++# --------------- ++AC_DEFUN([AC_PROG_LIBTOOL], ++[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl ++dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX ++dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. ++ AC_PROVIDE_IFELSE([AC_PROG_CXX], ++ [AC_LIBTOOL_CXX], ++ [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX ++ ])]) ++dnl And a similar setup for Fortran 77 support ++ AC_PROVIDE_IFELSE([AC_PROG_F77], ++ [AC_LIBTOOL_F77], ++ [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77 ++])]) + +-# AM_RUN_LOG(COMMAND) +-# ------------------- +-# Run COMMAND, save the exit status in ac_status, and log it. +-# (This has been adapted from Autoconf's _AC_RUN_LOG macro.) +-AC_DEFUN([AM_RUN_LOG], +-[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD +- ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD +- (exit $ac_status); }]) +- +-# Check to make sure that the build environment is sane. -*- Autoconf -*- ++dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. ++dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run ++dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. ++ AC_PROVIDE_IFELSE([AC_PROG_GCJ], ++ [AC_LIBTOOL_GCJ], ++ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], ++ [AC_LIBTOOL_GCJ], ++ [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], ++ [AC_LIBTOOL_GCJ], ++ [ifdef([AC_PROG_GCJ], ++ [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) ++ ifdef([A][M_PROG_GCJ], ++ [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) ++ ifdef([LT_AC_PROG_GCJ], ++ [define([LT_AC_PROG_GCJ], ++ defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) ++])])# AC_PROG_LIBTOOL + +-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 +-# Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. + +-# serial 4 ++# _AC_PROG_LIBTOOL ++# ---------------- ++AC_DEFUN([_AC_PROG_LIBTOOL], ++[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl ++AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl ++AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl ++AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl + +-# AM_SANITY_CHECK +-# --------------- +-AC_DEFUN([AM_SANITY_CHECK], +-[AC_MSG_CHECKING([whether build environment is sane]) +-# Just in case +-sleep 1 +-echo timestamp > conftest.file +-# Do `set' in a subshell so we don't clobber the current shell's +-# arguments. Must try -L first in case configure is actually a +-# symlink; some systems play weird games with the mod time of symlinks +-# (eg FreeBSD returns the mod time of the symlink's containing +-# directory). +-if ( +- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` +- if test "$[*]" = "X"; then +- # -L didn't work. +- set X `ls -t $srcdir/configure conftest.file` +- fi +- rm -f conftest.file +- if test "$[*]" != "X $srcdir/configure conftest.file" \ +- && test "$[*]" != "X conftest.file $srcdir/configure"; then ++# This can be used to rebuild libtool when needed ++LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" + +- # If neither matched, then we have a broken ls. This can happen +- # if, for instance, CONFIG_SHELL is bash and it inherits a +- # broken ls alias from the environment. This has actually +- # happened. Such a system could not be considered "sane". +- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +-alias in your environment]) +- fi ++# Always use our own libtool. ++LIBTOOL='$(SHELL) $(top_builddir)/libtool' ++AC_SUBST(LIBTOOL)dnl + +- test "$[2]" = conftest.file +- ) +-then +- # Ok. +- : +-else +- AC_MSG_ERROR([newly created file is older than distributed files! +-Check your system clock]) +-fi +-AC_MSG_RESULT(yes)]) ++# Prevent multiple expansion ++define([AC_PROG_LIBTOOL], []) ++])# _AC_PROG_LIBTOOL + +-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. + +-# AM_PROG_INSTALL_STRIP +-# --------------------- +-# One issue with vendor `install' (even GNU) is that you can't +-# specify the program used to strip binaries. This is especially +-# annoying in cross-compiling environments, where the build's strip +-# is unlikely to handle the host's binaries. +-# Fortunately install-sh will honor a STRIPPROG variable, so we +-# always use install-sh in `make install-strip', and initialize +-# STRIPPROG with the value of the STRIP variable (set by the user). +-AC_DEFUN([AM_PROG_INSTALL_STRIP], +-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +-# Installed binaries are usually stripped using `strip' when the user +-# run `make install-strip'. However `strip' might not be the right +-# tool to use in cross-compilation environments, therefore Automake +-# will honor the `STRIP' environment variable to overrule this program. +-dnl Don't test for $cross_compiling = yes, because it might be `maybe'. +-if test "$cross_compiling" != no; then +- AC_CHECK_TOOL([STRIP], [strip], :) +-fi +-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +-AC_SUBST([INSTALL_STRIP_PROGRAM])]) ++# AC_LIBTOOL_SETUP ++# ---------------- ++AC_DEFUN([AC_LIBTOOL_SETUP], ++[AC_PREREQ(2.50)dnl ++AC_REQUIRE([AC_ENABLE_SHARED])dnl ++AC_REQUIRE([AC_ENABLE_STATIC])dnl ++AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl ++AC_REQUIRE([AC_CANONICAL_HOST])dnl ++AC_REQUIRE([AC_CANONICAL_BUILD])dnl ++AC_REQUIRE([AC_PROG_CC])dnl ++AC_REQUIRE([AC_PROG_LD])dnl ++AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl ++AC_REQUIRE([AC_PROG_NM])dnl + +-# Copyright (C) 2006 Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++AC_REQUIRE([AC_PROG_LN_S])dnl ++AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl ++# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! ++AC_REQUIRE([AC_OBJEXT])dnl ++AC_REQUIRE([AC_EXEEXT])dnl ++dnl ++AC_LIBTOOL_SYS_MAX_CMD_LEN ++AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE ++AC_LIBTOOL_OBJDIR + +-# _AM_SUBST_NOTMAKE(VARIABLE) +-# --------------------------- +-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. +-# This macro is traced by Automake. +-AC_DEFUN([_AM_SUBST_NOTMAKE]) ++AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl ++_LT_AC_PROG_ECHO_BACKSLASH + +-# Check how to create a tarball. -*- Autoconf -*- ++case $host_os in ++aix3*) ++ # AIX sometimes has problems with the GCC collect2 program. For some ++ # reason, if we set the COLLECT_NAMES environment variable, the problems ++ # vanish in a puff of smoke. ++ if test "X${COLLECT_NAMES+set}" != Xset; then ++ COLLECT_NAMES= ++ export COLLECT_NAMES ++ fi ++ ;; ++esac + +-# Copyright (C) 2004, 2005 Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++# Sed substitution that helps us do robust quoting. It backslashifies ++# metacharacters that are still active within double-quoted strings. ++Xsed='sed -e 1s/^X//' ++[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] + +-# serial 2 ++# Same as above, but do not quote variable references. ++[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] + +-# _AM_PROG_TAR(FORMAT) +-# -------------------- +-# Check how to create a tarball in format FORMAT. +-# FORMAT should be one of `v7', `ustar', or `pax'. +-# +-# Substitute a variable $(am__tar) that is a command +-# writing to stdout a FORMAT-tarball containing the directory +-# $tardir. +-# tardir=directory && $(am__tar) > result.tar +-# +-# Substitute a variable $(am__untar) that extract such +-# a tarball read from stdin. +-# $(am__untar) < result.tar +-AC_DEFUN([_AM_PROG_TAR], +-[# Always define AMTAR for backward compatibility. +-AM_MISSING_PROG([AMTAR], [tar]) +-m4_if([$1], [v7], +- [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], +- [m4_case([$1], [ustar],, [pax],, +- [m4_fatal([Unknown tar format])]) +-AC_MSG_CHECKING([how to create a $1 tar archive]) +-# Loop over all known methods to create a tar archive until one works. +-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +-_am_tools=${am_cv_prog_tar_$1-$_am_tools} +-# Do not fold the above two line into one, because Tru64 sh and +-# Solaris sh will not grok spaces in the rhs of `-'. +-for _am_tool in $_am_tools +-do +- case $_am_tool in +- gnutar) +- for _am_tar in tar gnutar gtar; +- do +- AM_RUN_LOG([$_am_tar --version]) && break +- done +- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' +- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' +- am__untar="$_am_tar -xf -" +- ;; +- plaintar) +- # Must skip GNU tar: if it does not support --format= it doesn't create +- # ustar tarball either. +- (tar --version) >/dev/null 2>&1 && continue +- am__tar='tar chf - "$$tardir"' +- am__tar_='tar chf - "$tardir"' +- am__untar='tar xf -' +- ;; +- pax) +- am__tar='pax -L -x $1 -w "$$tardir"' +- am__tar_='pax -L -x $1 -w "$tardir"' +- am__untar='pax -r' +- ;; +- cpio) +- am__tar='find "$$tardir" -print | cpio -o -H $1 -L' +- am__tar_='find "$tardir" -print | cpio -o -H $1 -L' +- am__untar='cpio -i -H $1 -d' +- ;; +- none) +- am__tar=false +- am__tar_=false +- am__untar=false +- ;; +- esac ++# Sed substitution to delay expansion of an escaped shell variable in a ++# double_quote_subst'ed string. ++delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +- # If the value was cached, stop now. We just wanted to have am__tar +- # and am__untar set. +- test -n "${am_cv_prog_tar_$1}" && break ++# Sed substitution to avoid accidental globbing in evaled expressions ++no_glob_subst='s/\*/\\\*/g' + +- # tar/untar a dummy directory, and stop if the command works +- rm -rf conftest.dir +- mkdir conftest.dir +- echo GrepMe > conftest.dir/file +- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) +- rm -rf conftest.dir +- if test -s conftest.tar; then +- AM_RUN_LOG([$am__untar /dev/null 2>&1 && break +- fi +-done +-rm -rf conftest.dir ++# Constants: ++rm="rm -f" + +-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +-AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +-AC_SUBST([am__tar]) +-AC_SUBST([am__untar]) +-]) # _AM_PROG_TAR ++# Global variables: ++default_ofile=libtool ++can_build_shared=yes + +-dnl AM_GCONF_SOURCE_2 +-dnl Defines GCONF_SCHEMA_CONFIG_SOURCE which is where you should install schemas +-dnl (i.e. pass to gconftool-2 +-dnl Defines GCONF_SCHEMA_FILE_DIR which is a filesystem directory where +-dnl you should install foo.schemas files +-dnl ++# All known linkers require a `.a' archive for static linking (except MSVC, ++# which needs '.lib'). ++libext=a ++ltmain="$ac_aux_dir/ltmain.sh" ++ofile="$default_ofile" ++with_gnu_ld="$lt_cv_prog_gnu_ld" + +-AC_DEFUN([AM_GCONF_SOURCE_2], +-[ +- if test "x$GCONF_SCHEMA_INSTALL_SOURCE" = "x"; then +- GCONF_SCHEMA_CONFIG_SOURCE=`gconftool-2 --get-default-source` +- else +- GCONF_SCHEMA_CONFIG_SOURCE=$GCONF_SCHEMA_INSTALL_SOURCE +- fi ++AC_CHECK_TOOL(AR, ar, false) ++AC_CHECK_TOOL(RANLIB, ranlib, :) ++AC_CHECK_TOOL(STRIP, strip, :) + +- AC_ARG_WITH([gconf-source], +- AC_HELP_STRING([--with-gconf-source=sourceaddress], +- [Config database for installing schema files.]), +- [GCONF_SCHEMA_CONFIG_SOURCE="$withval"],) ++old_CC="$CC" ++old_CFLAGS="$CFLAGS" + +- AC_SUBST(GCONF_SCHEMA_CONFIG_SOURCE) +- AC_MSG_RESULT([Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation]) ++# Set sane defaults for various variables ++test -z "$AR" && AR=ar ++test -z "$AR_FLAGS" && AR_FLAGS=cru ++test -z "$AS" && AS=as ++test -z "$CC" && CC=cc ++test -z "$LTCC" && LTCC=$CC ++test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS ++test -z "$DLLTOOL" && DLLTOOL=dlltool ++test -z "$LD" && LD=ld ++test -z "$LN_S" && LN_S="ln -s" ++test -z "$MAGIC_CMD" && MAGIC_CMD=file ++test -z "$NM" && NM=nm ++test -z "$SED" && SED=sed ++test -z "$OBJDUMP" && OBJDUMP=objdump ++test -z "$RANLIB" && RANLIB=: ++test -z "$STRIP" && STRIP=: ++test -z "$ac_objext" && ac_objext=o + +- if test "x$GCONF_SCHEMA_FILE_DIR" = "x"; then +- GCONF_SCHEMA_FILE_DIR='$(sysconfdir)/gconf/schemas' +- fi ++# Determine commands to create old-style static archives. ++old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' ++old_postinstall_cmds='chmod 644 $oldlib' ++old_postuninstall_cmds= + +- AC_ARG_WITH([gconf-schema-file-dir], +- AC_HELP_STRING([--with-gconf-schema-file-dir=dir], +- [Directory for installing schema files.]), +- [GCONF_SCHEMA_FILE_DIR="$withval"],) ++if test -n "$RANLIB"; then ++ case $host_os in ++ openbsd*) ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" ++ ;; ++ *) ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" ++ ;; ++ esac ++ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" ++fi + +- AC_SUBST(GCONF_SCHEMA_FILE_DIR) +- AC_MSG_RESULT([Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files]) ++_LT_CC_BASENAME([$compiler]) + +- AC_ARG_ENABLE(schemas-install, +- [ --disable-schemas-install Disable the schemas installation], +- [case ${enableval} in +- yes|no) ;; +- *) AC_MSG_ERROR(bad value ${enableval} for --enable-schemas-install) ;; +- esac]) +- AM_CONDITIONAL([GCONF_SCHEMAS_INSTALL], [test "$enable_schemas_install" != no]) +-]) ++# Only perform the check for file, if the check method requires it ++case $deplibs_check_method in ++file_magic*) ++ if test "$file_magic_cmd" = '$MAGIC_CMD'; then ++ AC_PATH_MAGIC ++ fi ++ ;; ++esac + +-# Copyright (C) 1995-2002 Free Software Foundation, Inc. +-# Copyright (C) 2001-2003,2004 Red Hat, Inc. +-# +-# This file is free software, distributed under the terms of the GNU +-# General Public License. As a special exception to the GNU General +-# Public License, this file may be distributed as part of a program +-# that contains a configuration script generated by Autoconf, under +-# the same distribution terms as the rest of that program. +-# +-# This file can be copied and used freely without restrictions. It can +-# be used in projects which are not available under the GNU Public License +-# but which still want to provide support for the GNU gettext functionality. +-# +-# Macro to add for using GNU gettext. +-# Ulrich Drepper , 1995, 1996 +-# +-# Modified to never use included libintl. +-# Owen Taylor , 12/15/1998 +-# +-# Major rework to remove unused code +-# Owen Taylor , 12/11/2002 +-# +-# Added better handling of ALL_LINGUAS from GNU gettext version +-# written by Bruno Haible, Owen Taylor 5/30/3002 +-# +-# Modified to require ngettext +-# Matthias Clasen 08/06/2004 +-# +-# We need this here as well, since someone might use autoconf-2.5x +-# to configure GLib then an older version to configure a package +-# using AM_GLIB_GNU_GETTEXT +-AC_PREREQ(2.53) ++_LT_REQUIRED_DARWIN_CHECKS + +-dnl +-dnl We go to great lengths to make sure that aclocal won't +-dnl try to pull in the installed version of these macros +-dnl when running aclocal in the glib directory. +-dnl +-m4_copy([AC_DEFUN],[glib_DEFUN]) +-m4_copy([AC_REQUIRE],[glib_REQUIRE]) +-dnl +-dnl At the end, if we're not within glib, we'll define the public +-dnl definitions in terms of our private definitions. +-dnl ++AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) ++AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], ++enable_win32_dll=yes, enable_win32_dll=no) + +-# GLIB_LC_MESSAGES +-#-------------------- +-glib_DEFUN([GLIB_LC_MESSAGES], +- [AC_CHECK_HEADERS([locale.h]) +- if test $ac_cv_header_locale_h = yes; then +- AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, +- [AC_TRY_LINK([#include ], [return LC_MESSAGES], +- am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) +- if test $am_cv_val_LC_MESSAGES = yes; then +- AC_DEFINE(HAVE_LC_MESSAGES, 1, +- [Define if your file defines LC_MESSAGES.]) +- fi +- fi]) ++AC_ARG_ENABLE([libtool-lock], ++ [AC_HELP_STRING([--disable-libtool-lock], ++ [avoid locking (might break parallel builds)])]) ++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +-# GLIB_PATH_PROG_WITH_TEST +-#---------------------------- +-dnl GLIB_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, +-dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) +-glib_DEFUN([GLIB_PATH_PROG_WITH_TEST], +-[# Extract the first word of "$2", so it can be a program name with args. +-set dummy $2; ac_word=[$]2 +-AC_MSG_CHECKING([for $ac_word]) +-AC_CACHE_VAL(ac_cv_path_$1, +-[case "[$]$1" in +- /*) +- ac_cv_path_$1="[$]$1" # Let the user override the test with a path. +- ;; +- *) +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" +- for ac_dir in ifelse([$5], , $PATH, [$5]); do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$ac_word; then +- if [$3]; then +- ac_cv_path_$1="$ac_dir/$ac_word" +- break +- fi +- fi +- done +- IFS="$ac_save_ifs" +-dnl If no 4th arg is given, leave the cache variable unset, +-dnl so AC_PATH_PROGS will keep looking. +-ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" +-])dnl +- ;; +-esac])dnl +-$1="$ac_cv_path_$1" +-if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then +- AC_MSG_RESULT([$]$1) +-else +- AC_MSG_RESULT(no) +-fi +-AC_SUBST($1)dnl +-]) ++AC_ARG_WITH([pic], ++ [AC_HELP_STRING([--with-pic], ++ [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], ++ [pic_mode="$withval"], ++ [pic_mode=default]) ++test -z "$pic_mode" && pic_mode=default + +-# GLIB_WITH_NLS +-#----------------- +-glib_DEFUN([GLIB_WITH_NLS], +- dnl NLS is obligatory +- [USE_NLS=yes +- AC_SUBST(USE_NLS) ++# Use C for the default configuration in the libtool script ++tagname= ++AC_LIBTOOL_LANG_C_CONFIG ++_LT_AC_TAGCONFIG ++])# AC_LIBTOOL_SETUP + +- gt_cv_have_gettext=no + +- CATOBJEXT=NONE +- XGETTEXT=: +- INTLLIBS= ++# _LT_AC_SYS_COMPILER ++# ------------------- ++AC_DEFUN([_LT_AC_SYS_COMPILER], ++[AC_REQUIRE([AC_PROG_CC])dnl + +- AC_CHECK_HEADER(libintl.h, +- [gt_cv_func_dgettext_libintl="no" +- libintl_extra_libs="" ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} + +- # +- # First check in libc +- # +- AC_CACHE_CHECK([for ngettext in libc], gt_cv_func_ngettext_libc, +- [AC_TRY_LINK([ +-#include +-], +- [return !ngettext ("","", 1)], +- gt_cv_func_ngettext_libc=yes, +- gt_cv_func_ngettext_libc=no) +- ]) +- +- if test "$gt_cv_func_ngettext_libc" = "yes" ; then +- AC_CACHE_CHECK([for dgettext in libc], gt_cv_func_dgettext_libc, +- [AC_TRY_LINK([ +-#include +-], +- [return !dgettext ("","")], +- gt_cv_func_dgettext_libc=yes, +- gt_cv_func_dgettext_libc=no) +- ]) +- fi +- +- if test "$gt_cv_func_ngettext_libc" = "yes" ; then +- AC_CHECK_FUNCS(bind_textdomain_codeset) +- fi ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +- # +- # If we don't have everything we want, check in libintl +- # +- if test "$gt_cv_func_dgettext_libc" != "yes" \ +- || test "$gt_cv_func_ngettext_libc" != "yes" \ +- || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then +- +- AC_CHECK_LIB(intl, bindtextdomain, +- [AC_CHECK_LIB(intl, ngettext, +- [AC_CHECK_LIB(intl, dgettext, +- gt_cv_func_dgettext_libintl=yes)])]) +- +- if test "$gt_cv_func_dgettext_libintl" != "yes" ; then +- AC_MSG_CHECKING([if -liconv is needed to use gettext]) +- AC_MSG_RESULT([]) +- AC_CHECK_LIB(intl, ngettext, +- [AC_CHECK_LIB(intl, dcgettext, +- [gt_cv_func_dgettext_libintl=yes +- libintl_extra_libs=-liconv], +- :,-liconv)], +- :,-liconv) +- fi +- +- # +- # If we found libintl, then check in it for bind_textdomain_codeset(); +- # we'll prefer libc if neither have bind_textdomain_codeset(), +- # and both have dgettext and ngettext +- # +- if test "$gt_cv_func_dgettext_libintl" = "yes" ; then +- glib_save_LIBS="$LIBS" +- LIBS="$LIBS -lintl $libintl_extra_libs" +- unset ac_cv_func_bind_textdomain_codeset +- AC_CHECK_FUNCS(bind_textdomain_codeset) +- LIBS="$glib_save_LIBS" ++# Allow CC to be a program name with arguments. ++compiler=$CC ++])# _LT_AC_SYS_COMPILER + +- if test "$ac_cv_func_bind_textdomain_codeset" = "yes" ; then +- gt_cv_func_dgettext_libc=no +- else +- if test "$gt_cv_func_dgettext_libc" = "yes" \ +- && test "$gt_cv_func_ngettext_libc" = "yes"; then +- gt_cv_func_dgettext_libintl=no +- fi +- fi +- fi +- fi + +- if test "$gt_cv_func_dgettext_libc" = "yes" \ +- || test "$gt_cv_func_dgettext_libintl" = "yes"; then +- gt_cv_have_gettext=yes +- fi +- +- if test "$gt_cv_func_dgettext_libintl" = "yes"; then +- INTLLIBS="-lintl $libintl_extra_libs" +- fi +- +- if test "$gt_cv_have_gettext" = "yes"; then +- AC_DEFINE(HAVE_GETTEXT,1, +- [Define if the GNU gettext() function is already present or preinstalled.]) +- GLIB_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, +- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl +- if test "$MSGFMT" != "no"; then +- glib_save_LIBS="$LIBS" +- LIBS="$LIBS $INTLLIBS" +- AC_CHECK_FUNCS(dcgettext) +- MSGFMT_OPTS= +- AC_MSG_CHECKING([if msgfmt accepts -c]) +- GLIB_RUN_PROG([$MSGFMT -c -o /dev/null],[ +-msgid "" +-msgstr "" +-"Content-Type: text/plain; charset=UTF-8\n" +-"Project-Id-Version: test 1.0\n" +-"PO-Revision-Date: 2007-02-15 12:01+0100\n" +-"Last-Translator: test \n" +-"Language-Team: C \n" +-"MIME-Version: 1.0\n" +-"Content-Transfer-Encoding: 8bit\n" +-], [MSGFMT_OPTS=-c; AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no])]) +- AC_SUBST(MSGFMT_OPTS) +- AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) +- GLIB_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, +- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) +- AC_TRY_LINK(, [extern int _nl_msg_cat_cntr; +- return _nl_msg_cat_cntr], +- [CATOBJEXT=.gmo +- DATADIRNAME=share], +- [case $host in +- *-*-solaris*) +- dnl On Solaris, if bind_textdomain_codeset is in libc, +- dnl GNU format message catalog is always supported, +- dnl since both are added to the libc all together. +- dnl Hence, we'd like to go with DATADIRNAME=share and +- dnl and CATOBJEXT=.gmo in this case. +- AC_CHECK_FUNC(bind_textdomain_codeset, +- [CATOBJEXT=.gmo +- DATADIRNAME=share], +- [CATOBJEXT=.mo +- DATADIRNAME=lib]) +- ;; +- *) +- CATOBJEXT=.mo +- DATADIRNAME=lib +- ;; +- esac]) +- LIBS="$glib_save_LIBS" +- INSTOBJEXT=.mo +- else +- gt_cv_have_gettext=no +- fi +- fi +- ]) ++# _LT_CC_BASENAME(CC) ++# ------------------- ++# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. ++AC_DEFUN([_LT_CC_BASENAME], ++[for cc_temp in $1""; do ++ case $cc_temp in ++ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; ++ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++]) + +- if test "$gt_cv_have_gettext" = "yes" ; then +- AC_DEFINE(ENABLE_NLS, 1, +- [always defined to indicate that i18n is enabled]) +- fi + +- dnl Test whether we really found GNU xgettext. +- if test "$XGETTEXT" != ":"; then +- dnl If it is not GNU xgettext we define it as : so that the +- dnl Makefiles still can work. +- if $XGETTEXT --omit-header /dev/null 2> /dev/null; then +- : ; +- else +- AC_MSG_RESULT( +- [found xgettext program is not GNU xgettext; ignore it]) +- XGETTEXT=":" +- fi +- fi ++# _LT_COMPILER_BOILERPLATE ++# ------------------------ ++# Check for compiler boilerplate output or warnings with ++# the simple compiler test code. ++AC_DEFUN([_LT_COMPILER_BOILERPLATE], ++[AC_REQUIRE([LT_AC_PROG_SED])dnl ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_compile_test_code" >conftest.$ac_ext ++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_compiler_boilerplate=`cat conftest.err` ++$rm conftest* ++])# _LT_COMPILER_BOILERPLATE + +- # We need to process the po/ directory. +- POSUB=po + +- AC_OUTPUT_COMMANDS( +- [case "$CONFIG_FILES" in *po/Makefile.in*) +- sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile +- esac]) ++# _LT_LINKER_BOILERPLATE ++# ---------------------- ++# Check for linker boilerplate output or warnings with ++# the simple link test code. ++AC_DEFUN([_LT_LINKER_BOILERPLATE], ++[AC_REQUIRE([LT_AC_PROG_SED])dnl ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_link_test_code" >conftest.$ac_ext ++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_linker_boilerplate=`cat conftest.err` ++$rm -r conftest* ++])# _LT_LINKER_BOILERPLATE + +- dnl These rules are solely for the distribution goal. While doing this +- dnl we only have to keep exactly one list of the available catalogs +- dnl in configure.in. +- for lang in $ALL_LINGUAS; do +- GMOFILES="$GMOFILES $lang.gmo" +- POFILES="$POFILES $lang.po" +- done ++# _LT_REQUIRED_DARWIN_CHECKS ++# -------------------------- ++# Check for some things on darwin ++AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS],[ ++ case $host_os in ++ rhapsody* | darwin*) ++ AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) ++ AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) + +- dnl Make all variables we use known to autoconf. +- AC_SUBST(CATALOGS) +- AC_SUBST(CATOBJEXT) +- AC_SUBST(DATADIRNAME) +- AC_SUBST(GMOFILES) +- AC_SUBST(INSTOBJEXT) +- AC_SUBST(INTLLIBS) +- AC_SUBST(PO_IN_DATADIR_TRUE) +- AC_SUBST(PO_IN_DATADIR_FALSE) +- AC_SUBST(POFILES) +- AC_SUBST(POSUB) +- ]) ++ AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], ++ [lt_cv_apple_cc_single_mod=no ++ if test -z "${LT_MULTI_MODULE}"; then ++ # By default we will add the -single_module flag. You can override ++ # by either setting the environment variable LT_MULTI_MODULE ++ # non-empty at configure time, or by adding -multi_module to the ++ # link flags. ++ echo "int foo(void){return 1;}" > conftest.c ++ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ ++ -dynamiclib ${wl}-single_module conftest.c ++ if test -f libconftest.dylib; then ++ lt_cv_apple_cc_single_mod=yes ++ rm -rf libconftest.dylib* ++ fi ++ rm conftest.c ++ fi]) ++ AC_CACHE_CHECK([for -exported_symbols_list linker flag], ++ [lt_cv_ld_exported_symbols_list], ++ [lt_cv_ld_exported_symbols_list=no ++ save_LDFLAGS=$LDFLAGS ++ echo "_main" > conftest.sym ++ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" ++ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], ++ [lt_cv_ld_exported_symbols_list=yes], ++ [lt_cv_ld_exported_symbols_list=no]) ++ LDFLAGS="$save_LDFLAGS" ++ ]) ++ case $host_os in ++ rhapsody* | darwin1.[[0123]]) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; ++ darwin1.*) ++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; ++ darwin*) ++ # if running on 10.5 or later, the deployment target defaults ++ # to the OS version, if on x86, and 10.4, the deployment ++ # target defaults to 10.4. Don't you love it? ++ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in ++ 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; ++ 10.[[012]]*) ++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; ++ 10.*) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; ++ esac ++ ;; ++ esac ++ if test "$lt_cv_apple_cc_single_mod" = "yes"; then ++ _lt_dar_single_mod='$single_module' ++ fi ++ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then ++ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' ++ else ++ _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}" ++ fi ++ if test "$DSYMUTIL" != ":"; then ++ _lt_dsymutil="~$DSYMUTIL \$lib || :" ++ else ++ _lt_dsymutil= ++ fi ++ ;; ++ esac ++]) + +-# AM_GLIB_GNU_GETTEXT +-# ------------------- +-# Do checks necessary for use of gettext. If a suitable implementation +-# of gettext is found in either in libintl or in the C library, +-# it will set INTLLIBS to the libraries needed for use of gettext +-# and AC_DEFINE() HAVE_GETTEXT and ENABLE_NLS. (The shell variable +-# gt_cv_have_gettext will be set to "yes".) It will also call AC_SUBST() +-# on various variables needed by the Makefile.in.in installed by +-# glib-gettextize. +-dnl +-glib_DEFUN([GLIB_GNU_GETTEXT], +- [AC_REQUIRE([AC_PROG_CC])dnl +- AC_REQUIRE([AC_HEADER_STDC])dnl +- +- GLIB_LC_MESSAGES +- GLIB_WITH_NLS ++# _LT_AC_SYS_LIBPATH_AIX ++# ---------------------- ++# Links a minimal program and checks the executable ++# for the system default hardcoded library path. In most cases, ++# this is /usr/lib:/lib, but when the MPI compilers are used ++# the location of the communication and MPI libs are included too. ++# If we don't find anything, use the default library path according ++# to the aix ld manual. ++AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], ++[AC_REQUIRE([LT_AC_PROG_SED])dnl ++AC_LINK_IFELSE(AC_LANG_PROGRAM,[ ++lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *\(.*\)$/\1/ ++ p ++ } ++ }' ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then ++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++fi],[]) ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++])# _LT_AC_SYS_LIBPATH_AIX + +- if test "$gt_cv_have_gettext" = "yes"; then +- if test "x$ALL_LINGUAS" = "x"; then +- LINGUAS= +- else +- AC_MSG_CHECKING(for catalogs to be installed) +- NEW_LINGUAS= +- for presentlang in $ALL_LINGUAS; do +- useit=no +- if test "%UNSET%" != "${LINGUAS-%UNSET%}"; then +- desiredlanguages="$LINGUAS" +- else +- desiredlanguages="$ALL_LINGUAS" +- fi +- for desiredlang in $desiredlanguages; do +- # Use the presentlang catalog if desiredlang is +- # a. equal to presentlang, or +- # b. a variant of presentlang (because in this case, +- # presentlang can be used as a fallback for messages +- # which are not translated in the desiredlang catalog). +- case "$desiredlang" in +- "$presentlang"*) useit=yes;; +- esac +- done +- if test $useit = yes; then +- NEW_LINGUAS="$NEW_LINGUAS $presentlang" +- fi +- done +- LINGUAS=$NEW_LINGUAS +- AC_MSG_RESULT($LINGUAS) +- fi + +- dnl Construct list of names of catalog files to be constructed. +- if test -n "$LINGUAS"; then +- for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done +- fi +- fi ++# _LT_AC_SHELL_INIT(ARG) ++# ---------------------- ++AC_DEFUN([_LT_AC_SHELL_INIT], ++[ifdef([AC_DIVERSION_NOTICE], ++ [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], ++ [AC_DIVERT_PUSH(NOTICE)]) ++$1 ++AC_DIVERT_POP ++])# _LT_AC_SHELL_INIT + +- dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly +- dnl find the mkinstalldirs script in another subdir but ($top_srcdir). +- dnl Try to locate is. +- MKINSTALLDIRS= +- if test -n "$ac_aux_dir"; then +- MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" +- fi +- if test -z "$MKINSTALLDIRS"; then +- MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" +- fi +- AC_SUBST(MKINSTALLDIRS) + +- dnl Generate list of files to be processed by xgettext which will +- dnl be included in po/Makefile. +- test -d po || mkdir po +- if test "x$srcdir" != "x."; then +- if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then +- posrcprefix="$srcdir/" +- else +- posrcprefix="../$srcdir/" +- fi +- else +- posrcprefix="../" +- fi +- rm -f po/POTFILES +- sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ +- < $srcdir/po/POTFILES.in > po/POTFILES +- ]) ++# _LT_AC_PROG_ECHO_BACKSLASH ++# -------------------------- ++# Add some code to the start of the generated configure script which ++# will find an echo command which doesn't interpret backslashes. ++AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], ++[_LT_AC_SHELL_INIT([ ++# Check that we are running under the correct shell. ++SHELL=${CONFIG_SHELL-/bin/sh} + +-# AM_GLIB_DEFINE_LOCALEDIR(VARIABLE) +-# ------------------------------- +-# Define VARIABLE to the location where catalog files will +-# be installed by po/Makefile. +-glib_DEFUN([GLIB_DEFINE_LOCALEDIR], +-[glib_REQUIRE([GLIB_GNU_GETTEXT])dnl +-glib_save_prefix="$prefix" +-glib_save_exec_prefix="$exec_prefix" +-glib_save_datarootdir="$datarootdir" +-test "x$prefix" = xNONE && prefix=$ac_default_prefix +-test "x$exec_prefix" = xNONE && exec_prefix=$prefix +-datarootdir=`eval echo "${datarootdir}"` +-if test "x$CATOBJEXT" = "x.mo" ; then +- localedir=`eval echo "${libdir}/locale"` ++case X$ECHO in ++X*--fallback-echo) ++ # Remove one level of quotation (which was required for Make). ++ ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` ++ ;; ++esac ++ ++echo=${ECHO-echo} ++if test "X[$]1" = X--no-reexec; then ++ # Discard the --no-reexec flag, and continue. ++ shift ++elif test "X[$]1" = X--fallback-echo; then ++ # Avoid inline document here, it may be left over ++ : ++elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then ++ # Yippee, $echo works! ++ : + else +- localedir=`eval echo "${datadir}/locale"` ++ # Restart under the correct shell. ++ exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} + fi +-prefix="$glib_save_prefix" +-exec_prefix="$glib_save_exec_prefix" +-datarootdir="$glib_save_datarootdir" +-AC_DEFINE_UNQUOTED($1, "$localedir", +- [Define the location where the catalogs will be installed]) +-]) +- +-dnl +-dnl Now the definitions that aclocal will find +-dnl +-ifdef(glib_configure_in,[],[ +-AC_DEFUN([AM_GLIB_GNU_GETTEXT],[GLIB_GNU_GETTEXT($@)]) +-AC_DEFUN([AM_GLIB_DEFINE_LOCALEDIR],[GLIB_DEFINE_LOCALEDIR($@)]) +-])dnl +- +-# GLIB_RUN_PROG(PROGRAM, TEST-FILE, [ACTION-IF-PASS], [ACTION-IF-FAIL]) +-# +-# Create a temporary file with TEST-FILE as its contents and pass the +-# file name to PROGRAM. Perform ACTION-IF-PASS if PROGRAM exits with +-# 0 and perform ACTION-IF-FAIL for any other exit status. +-AC_DEFUN([GLIB_RUN_PROG], +-[cat >conftest.foo <<_ACEOF +-$2 +-_ACEOF +-if AC_RUN_LOG([$1 conftest.foo]); then +- m4_ifval([$3], [$3], [:]) +-m4_ifvaln([$4], [else $4])dnl +-echo "$as_me: failed input was:" >&AS_MESSAGE_LOG_FD +-sed 's/^/| /' conftest.foo >&AS_MESSAGE_LOG_FD +-fi]) +- +- +-# gnome-common.m4 +-# +- +-dnl GNOME_COMMON_INIT + +-AC_DEFUN([GNOME_COMMON_INIT], +-[ +- dnl this macro should come after AC_CONFIG_MACRO_DIR +- AC_BEFORE([AC_CONFIG_MACRO_DIR], [$0]) ++if test "X[$]1" = X--fallback-echo; then ++ # used as fallback echo ++ shift ++ cat </dev/null 2>&1 && unset CDPATH + +- AC_SUBST([ACLOCAL_AMFLAGS]) +-]) ++if test -z "$ECHO"; then ++if test "X${echo_test_string+set}" != Xset; then ++# find a string as large as possible, as long as the shell can cope with it ++ for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do ++ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... ++ if (echo_test_string=`eval $cmd`) 2>/dev/null && ++ echo_test_string=`eval $cmd` && ++ (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null ++ then ++ break ++ fi ++ done ++fi + +-AC_DEFUN([GNOME_DEBUG_CHECK], +-[ +- AC_ARG_ENABLE([debug], +- AC_HELP_STRING([--enable-debug], +- [turn on debugging]),, +- [enable_debug=no]) ++if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ : ++else ++ # The Solaris, AIX, and Digital Unix default echo programs unquote ++ # backslashes. This makes it impossible to quote backslashes using ++ # echo "$something" | sed 's/\\/\\\\/g' ++ # ++ # So, first we look for a working echo in the user's PATH. + +- if test x$enable_debug = xyes ; then +- AC_DEFINE(GNOME_ENABLE_DEBUG, 1, +- [Enable additional debugging at the expense of performance and size]) +- fi +-]) ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for dir in $PATH /usr/ucb; do ++ IFS="$lt_save_ifs" ++ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && ++ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ echo="$dir/echo" ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" + +-dnl GNOME_MAINTAINER_MODE_DEFINES () +-dnl define DISABLE_DEPRECATED +-dnl +-AC_DEFUN([GNOME_MAINTAINER_MODE_DEFINES], +-[ +- AC_REQUIRE([AM_MAINTAINER_MODE]) +- +- if test $USE_MAINTAINER_MODE = yes; then +- DISABLE_DEPRECATED="-DG_DISABLE_DEPRECATED -DGDK_DISABLE_DEPRECATED -DGDK_PIXBUF_DISABLE_DEPRECATED -DPANGO_DISABLE_DEPRECATED -DGTK_DISABLE_DEPRECATED -DGCONF_DISABLE_DEPRECATED -DBONOBO_DISABLE_DEPRECATED -DBONOBO_UI_DISABLE_DEPRECATED -DGNOME_VFS_DISABLE_DEPRECATED -DGNOME_DISABLE_DEPRECATED -DLIBGLADE_DISABLE_DEPRECATED" +- else +- DISABLE_DEPRECATED="" +- fi +- AC_SUBST(DISABLE_DEPRECATED) +-]) +- +-dnl GNOME_COMPILE_WARNINGS +-dnl Turn on many useful compiler warnings +-dnl For now, only works on GCC +-AC_DEFUN([GNOME_COMPILE_WARNINGS],[ +- dnl ****************************** +- dnl More compiler warnings +- dnl ****************************** +- +- AC_ARG_ENABLE(compile-warnings, +- AC_HELP_STRING([--enable-compile-warnings=@<:@no/minimum/yes/maximum/error@:>@], +- [Turn on compiler warnings]),, +- [enable_compile_warnings="m4_default([$1],[yes])"]) +- +- warnCFLAGS= +- if test "x$GCC" != xyes; then +- enable_compile_warnings=no +- fi +- +- warning_flags= +- realsave_CFLAGS="$CFLAGS" ++ if test "X$echo" = Xecho; then ++ # We didn't find a better echo, so look for alternatives. ++ if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ # This shell has a builtin print -r that does the trick. ++ echo='print -r' ++ elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && ++ test "X$CONFIG_SHELL" != X/bin/ksh; then ++ # If we have ksh, try running configure again with it. ++ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} ++ export ORIGINAL_CONFIG_SHELL ++ CONFIG_SHELL=/bin/ksh ++ export CONFIG_SHELL ++ exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} ++ else ++ # Try using printf. ++ echo='printf %s\n' ++ if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ # Cool, printf works ++ : ++ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && ++ test "X$echo_testing_string" = 'X\t' && ++ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL ++ export CONFIG_SHELL ++ SHELL="$CONFIG_SHELL" ++ export SHELL ++ echo="$CONFIG_SHELL [$]0 --fallback-echo" ++ elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && ++ test "X$echo_testing_string" = 'X\t' && ++ echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ echo="$CONFIG_SHELL [$]0 --fallback-echo" ++ else ++ # maybe with a smaller string... ++ prev=: + +- case "$enable_compile_warnings" in +- no) +- warning_flags= +- ;; +- minimum) +- warning_flags="-Wall" +- ;; +- yes) +- warning_flags="-Wall -Wmissing-prototypes" +- ;; +- maximum|error) +- warning_flags="-Wall -Wmissing-prototypes -Wnested-externs -Wpointer-arith" +- CFLAGS="$warning_flags $CFLAGS" +- for option in -Wno-sign-compare; do +- SAVE_CFLAGS="$CFLAGS" +- CFLAGS="$CFLAGS $option" +- AC_MSG_CHECKING([whether gcc understands $option]) +- AC_TRY_COMPILE([], [], +- has_option=yes, +- has_option=no,) +- CFLAGS="$SAVE_CFLAGS" +- AC_MSG_RESULT($has_option) +- if test $has_option = yes; then +- warning_flags="$warning_flags $option" +- fi +- unset has_option +- unset SAVE_CFLAGS ++ for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do ++ if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null ++ then ++ break ++ fi ++ prev="$cmd" + done +- unset option +- if test "$enable_compile_warnings" = "error" ; then +- warning_flags="$warning_flags -Werror" +- fi +- ;; +- *) +- AC_MSG_ERROR(Unknown argument '$enable_compile_warnings' to --enable-compile-warnings) +- ;; +- esac +- CFLAGS="$realsave_CFLAGS" +- AC_MSG_CHECKING(what warning flags to pass to the C compiler) +- AC_MSG_RESULT($warning_flags) + +- AC_ARG_ENABLE(iso-c, +- AC_HELP_STRING([--enable-iso-c], +- [Try to warn if code is not ISO C ]),, +- [enable_iso_c=no]) +- +- AC_MSG_CHECKING(what language compliance flags to pass to the C compiler) +- complCFLAGS= +- if test "x$enable_iso_c" != "xno"; then +- if test "x$GCC" = "xyes"; then +- case " $CFLAGS " in +- *[\ \ ]-ansi[\ \ ]*) ;; +- *) complCFLAGS="$complCFLAGS -ansi" ;; +- esac +- case " $CFLAGS " in +- *[\ \ ]-pedantic[\ \ ]*) ;; +- *) complCFLAGS="$complCFLAGS -pedantic" ;; +- esac ++ if test "$prev" != 'sed 50q "[$]0"'; then ++ echo_test_string=`eval $prev` ++ export echo_test_string ++ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} ++ else ++ # Oops. We lost completely, so just stick with echo. ++ echo=echo + fi +- fi +- AC_MSG_RESULT($complCFLAGS) +- +- WARN_CFLAGS="$warning_flags $complCFLAGS" +- AC_SUBST(WARN_CFLAGS) +-]) +- +-dnl For C++, do basically the same thing. +- +-AC_DEFUN([GNOME_CXX_WARNINGS],[ +- AC_ARG_ENABLE(cxx-warnings, +- AC_HELP_STRING([--enable-cxx-warnings=@<:@no/minimum/yes@:>@] +- [Turn on compiler warnings.]),, +- [enable_cxx_warnings="m4_default([$1],[minimum])"]) +- +- AC_MSG_CHECKING(what warning flags to pass to the C++ compiler) +- warnCXXFLAGS= +- if test "x$GXX" != xyes; then +- enable_cxx_warnings=no +- fi +- if test "x$enable_cxx_warnings" != "xno"; then +- if test "x$GXX" = "xyes"; then +- case " $CXXFLAGS " in +- *[\ \ ]-Wall[\ \ ]*) ;; +- *) warnCXXFLAGS="-Wall -Wno-unused" ;; +- esac +- +- ## -W is not all that useful. And it cannot be controlled +- ## with individual -Wno-xxx flags, unlike -Wall +- if test "x$enable_cxx_warnings" = "xyes"; then +- warnCXXFLAGS="$warnCXXFLAGS -Wshadow -Woverloaded-virtual" + fi + fi + fi +- AC_MSG_RESULT($warnCXXFLAGS) +- +- AC_ARG_ENABLE(iso-cxx, +- AC_HELP_STRING([--enable-iso-cxx], +- [Try to warn if code is not ISO C++ ]),, +- [enable_iso_cxx=no]) +- +- AC_MSG_CHECKING(what language compliance flags to pass to the C++ compiler) +- complCXXFLAGS= +- if test "x$enable_iso_cxx" != "xno"; then +- if test "x$GXX" = "xyes"; then +- case " $CXXFLAGS " in +- *[\ \ ]-ansi[\ \ ]*) ;; +- *) complCXXFLAGS="$complCXXFLAGS -ansi" ;; +- esac +- +- case " $CXXFLAGS " in +- *[\ \ ]-pedantic[\ \ ]*) ;; +- *) complCXXFLAGS="$complCXXFLAGS -pedantic" ;; +- esac +- fi +- fi +- AC_MSG_RESULT($complCXXFLAGS) +- +- WARN_CXXFLAGS="$CXXFLAGS $warnCXXFLAGS $complCXXFLAGS" +- AC_SUBST(WARN_CXXFLAGS) +-]) +- +-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- +- +-# serial 52 AC_PROG_LIBTOOL ++fi ++fi + ++# Copy echo and quote the copy suitably for passing to libtool from ++# the Makefile, instead of quoting the original, which is used later. ++ECHO=$echo ++if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then ++ ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" ++fi + +-# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) +-# ----------------------------------------------------------- +-# If this macro is not defined by Autoconf, define it here. +-m4_ifdef([AC_PROVIDE_IFELSE], +- [], +- [m4_define([AC_PROVIDE_IFELSE], +- [m4_ifdef([AC_PROVIDE_$1], +- [$2], [$3])])]) ++AC_SUBST(ECHO) ++])])# _LT_AC_PROG_ECHO_BACKSLASH + + +-# AC_PROG_LIBTOOL +-# --------------- +-AC_DEFUN([AC_PROG_LIBTOOL], +-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl +-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX +-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. +- AC_PROVIDE_IFELSE([AC_PROG_CXX], +- [AC_LIBTOOL_CXX], +- [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX +- ])]) +-dnl And a similar setup for Fortran 77 support +- AC_PROVIDE_IFELSE([AC_PROG_F77], +- [AC_LIBTOOL_F77], +- [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77 +-])]) ++# _LT_AC_LOCK ++# ----------- ++AC_DEFUN([_LT_AC_LOCK], ++[AC_ARG_ENABLE([libtool-lock], ++ [AC_HELP_STRING([--disable-libtool-lock], ++ [avoid locking (might break parallel builds)])]) ++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. +-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run +-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. +- AC_PROVIDE_IFELSE([AC_PROG_GCJ], +- [AC_LIBTOOL_GCJ], +- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], +- [AC_LIBTOOL_GCJ], +- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], +- [AC_LIBTOOL_GCJ], +- [ifdef([AC_PROG_GCJ], +- [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) +- ifdef([A][M_PROG_GCJ], +- [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) +- ifdef([LT_AC_PROG_GCJ], +- [define([LT_AC_PROG_GCJ], +- defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) +-])])# AC_PROG_LIBTOOL +- +- +-# _AC_PROG_LIBTOOL +-# ---------------- +-AC_DEFUN([_AC_PROG_LIBTOOL], +-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl +-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl +-AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl +-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl +- +-# This can be used to rebuild libtool when needed +-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" +- +-# Always use our own libtool. +-LIBTOOL='$(SHELL) $(top_builddir)/libtool' +-AC_SUBST(LIBTOOL)dnl +- +-# Prevent multiple expansion +-define([AC_PROG_LIBTOOL], []) +-])# _AC_PROG_LIBTOOL +- +- +-# AC_LIBTOOL_SETUP +-# ---------------- +-AC_DEFUN([AC_LIBTOOL_SETUP], +-[AC_PREREQ(2.50)dnl +-AC_REQUIRE([AC_ENABLE_SHARED])dnl +-AC_REQUIRE([AC_ENABLE_STATIC])dnl +-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl +-AC_REQUIRE([AC_CANONICAL_HOST])dnl +-AC_REQUIRE([AC_CANONICAL_BUILD])dnl +-AC_REQUIRE([AC_PROG_CC])dnl +-AC_REQUIRE([AC_PROG_LD])dnl +-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl +-AC_REQUIRE([AC_PROG_NM])dnl +- +-AC_REQUIRE([AC_PROG_LN_S])dnl +-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl +-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! +-AC_REQUIRE([AC_OBJEXT])dnl +-AC_REQUIRE([AC_EXEEXT])dnl +-dnl +-AC_LIBTOOL_SYS_MAX_CMD_LEN +-AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +-AC_LIBTOOL_OBJDIR ++# Some flags need to be propagated to the compiler or linker for good ++# libtool support. ++case $host in ++ia64-*-hpux*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if AC_TRY_EVAL(ac_compile); then ++ case `/usr/bin/file conftest.$ac_objext` in ++ *ELF-32*) ++ HPUX_IA64_MODE="32" ++ ;; ++ *ELF-64*) ++ HPUX_IA64_MODE="64" ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; ++*-*-irix6*) ++ # Find out which ABI we are using. ++ echo '[#]line __oline__ "configure"' > conftest.$ac_ext ++ if AC_TRY_EVAL(ac_compile); then ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ case `/usr/bin/file conftest.$ac_objext` in ++ *32-bit*) ++ LD="${LD-ld} -melf32bsmip" ++ ;; ++ *N32*) ++ LD="${LD-ld} -melf32bmipn32" ++ ;; ++ *64-bit*) ++ LD="${LD-ld} -melf64bmip" ++ ;; ++ esac ++ else ++ case `/usr/bin/file conftest.$ac_objext` in ++ *32-bit*) ++ LD="${LD-ld} -32" ++ ;; ++ *N32*) ++ LD="${LD-ld} -n32" ++ ;; ++ *64-bit*) ++ LD="${LD-ld} -64" ++ ;; ++ esac ++ fi ++ fi ++ rm -rf conftest* ++ ;; + +-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl +-_LT_AC_PROG_ECHO_BACKSLASH ++x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ ++s390*-*linux*|sparc*-*linux*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if AC_TRY_EVAL(ac_compile); then ++ case `/usr/bin/file conftest.o` in ++ *32-bit*) ++ case $host in ++ x86_64-*kfreebsd*-gnu) ++ LD="${LD-ld} -m elf_i386_fbsd" ++ ;; ++ x86_64-*linux*) ++ LD="${LD-ld} -m elf_i386" ++ ;; ++ ppc64-*linux*|powerpc64-*linux*) ++ LD="${LD-ld} -m elf32ppclinux" ++ ;; ++ s390x-*linux*) ++ LD="${LD-ld} -m elf_s390" ++ ;; ++ sparc64-*linux*) ++ LD="${LD-ld} -m elf32_sparc" ++ ;; ++ esac ++ ;; ++ *64-bit*) ++ case $host in ++ x86_64-*kfreebsd*-gnu) ++ LD="${LD-ld} -m elf_x86_64_fbsd" ++ ;; ++ x86_64-*linux*) ++ LD="${LD-ld} -m elf_x86_64" ++ ;; ++ ppc*-*linux*|powerpc*-*linux*) ++ LD="${LD-ld} -m elf64ppc" ++ ;; ++ s390*-*linux*) ++ LD="${LD-ld} -m elf64_s390" ++ ;; ++ sparc*-*linux*) ++ LD="${LD-ld} -m elf64_sparc" ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; + +-case $host_os in +-aix3*) +- # AIX sometimes has problems with the GCC collect2 program. For some +- # reason, if we set the COLLECT_NAMES environment variable, the problems +- # vanish in a puff of smoke. +- if test "X${COLLECT_NAMES+set}" != Xset; then +- COLLECT_NAMES= +- export COLLECT_NAMES ++*-*-sco3.2v5*) ++ # On SCO OpenServer 5, we need -belf to get full-featured binaries. ++ SAVE_CFLAGS="$CFLAGS" ++ CFLAGS="$CFLAGS -belf" ++ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, ++ [AC_LANG_PUSH(C) ++ AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) ++ AC_LANG_POP]) ++ if test x"$lt_cv_cc_needs_belf" != x"yes"; then ++ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf ++ CFLAGS="$SAVE_CFLAGS" ++ fi ++ ;; ++sparc*-*solaris*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if AC_TRY_EVAL(ac_compile); then ++ case `/usr/bin/file conftest.o` in ++ *64-bit*) ++ case $lt_cv_prog_gnu_ld in ++ yes*) LD="${LD-ld} -m elf64_sparc" ;; ++ *) ++ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then ++ LD="${LD-ld} -64" ++ fi ++ ;; ++ esac ++ ;; ++ esac + fi ++ rm -rf conftest* ++ ;; ++ ++AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], ++[*-*-cygwin* | *-*-mingw* | *-*-pw32*) ++ AC_CHECK_TOOL(DLLTOOL, dlltool, false) ++ AC_CHECK_TOOL(AS, as, false) ++ AC_CHECK_TOOL(OBJDUMP, objdump, false) + ;; ++ ]) + esac + +-# Sed substitution that helps us do robust quoting. It backslashifies +-# metacharacters that are still active within double-quoted strings. +-Xsed='sed -e 1s/^X//' +-[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] ++need_locks="$enable_libtool_lock" + +-# Same as above, but do not quote variable references. +-[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] ++])# _LT_AC_LOCK + +-# Sed substitution to delay expansion of an escaped shell variable in a +-# double_quote_subst'ed string. +-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +-# Sed substitution to avoid accidental globbing in evaled expressions +-no_glob_subst='s/\*/\\\*/g' ++# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, ++# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) ++# ---------------------------------------------------------------- ++# Check whether the given compiler option works ++AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], ++[AC_REQUIRE([LT_AC_PROG_SED]) ++AC_CACHE_CHECK([$1], [$2], ++ [$2=no ++ ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="$3" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&AS_MESSAGE_LOG_FD ++ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ $2=yes ++ fi ++ fi ++ $rm conftest* ++]) + +-# Constants: +-rm="rm -f" ++if test x"[$]$2" = xyes; then ++ ifelse([$5], , :, [$5]) ++else ++ ifelse([$6], , :, [$6]) ++fi ++])# AC_LIBTOOL_COMPILER_OPTION + +-# Global variables: +-default_ofile=libtool +-can_build_shared=yes +- +-# All known linkers require a `.a' archive for static linking (except MSVC, +-# which needs '.lib'). +-libext=a +-ltmain="$ac_aux_dir/ltmain.sh" +-ofile="$default_ofile" +-with_gnu_ld="$lt_cv_prog_gnu_ld" + +-AC_CHECK_TOOL(AR, ar, false) +-AC_CHECK_TOOL(RANLIB, ranlib, :) +-AC_CHECK_TOOL(STRIP, strip, :) ++# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, ++# [ACTION-SUCCESS], [ACTION-FAILURE]) ++# ------------------------------------------------------------ ++# Check whether the given compiler option works ++AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], ++[AC_REQUIRE([LT_AC_PROG_SED])dnl ++AC_CACHE_CHECK([$1], [$2], ++ [$2=no ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS $3" ++ echo "$lt_simple_link_test_code" > conftest.$ac_ext ++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then ++ # The linker can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ if test -s conftest.err; then ++ # Append any errors to the config.log. ++ cat conftest.err 1>&AS_MESSAGE_LOG_FD ++ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if diff conftest.exp conftest.er2 >/dev/null; then ++ $2=yes ++ fi ++ else ++ $2=yes ++ fi ++ fi ++ $rm -r conftest* ++ LDFLAGS="$save_LDFLAGS" ++]) + +-old_CC="$CC" +-old_CFLAGS="$CFLAGS" ++if test x"[$]$2" = xyes; then ++ ifelse([$4], , :, [$4]) ++else ++ ifelse([$5], , :, [$5]) ++fi ++])# AC_LIBTOOL_LINKER_OPTION + +-# Set sane defaults for various variables +-test -z "$AR" && AR=ar +-test -z "$AR_FLAGS" && AR_FLAGS=cru +-test -z "$AS" && AS=as +-test -z "$CC" && CC=cc +-test -z "$LTCC" && LTCC=$CC +-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +-test -z "$DLLTOOL" && DLLTOOL=dlltool +-test -z "$LD" && LD=ld +-test -z "$LN_S" && LN_S="ln -s" +-test -z "$MAGIC_CMD" && MAGIC_CMD=file +-test -z "$NM" && NM=nm +-test -z "$SED" && SED=sed +-test -z "$OBJDUMP" && OBJDUMP=objdump +-test -z "$RANLIB" && RANLIB=: +-test -z "$STRIP" && STRIP=: +-test -z "$ac_objext" && ac_objext=o + +-# Determine commands to create old-style static archives. +-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +-old_postinstall_cmds='chmod 644 $oldlib' +-old_postuninstall_cmds= ++# AC_LIBTOOL_SYS_MAX_CMD_LEN ++# -------------------------- ++AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], ++[# find the maximum length of command line arguments ++AC_MSG_CHECKING([the maximum length of command line arguments]) ++AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl ++ i=0 ++ teststring="ABCD" + +-if test -n "$RANLIB"; then +- case $host_os in +- openbsd*) +- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" ++ case $build_os in ++ msdosdjgpp*) ++ # On DJGPP, this test can blow up pretty badly due to problems in libc ++ # (any single argument exceeding 2000 bytes causes a buffer overrun ++ # during glob expansion). Even if it were fixed, the result of this ++ # check would be larger than it should be. ++ lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; +- *) +- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" ++ ++ gnu*) ++ # Under GNU Hurd, this test is not required because there is ++ # no limit to the length of command line arguments. ++ # Libtool will interpret -1 as no limit whatsoever ++ lt_cv_sys_max_cmd_len=-1; + ;; +- esac +- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +-fi + +-_LT_CC_BASENAME([$compiler]) ++ cygwin* | mingw*) ++ # On Win9x/ME, this test blows up -- it succeeds, but takes ++ # about 5 minutes as the teststring grows exponentially. ++ # Worse, since 9x/ME are not pre-emptively multitasking, ++ # you end up with a "frozen" computer, even though with patience ++ # the test eventually succeeds (with a max line length of 256k). ++ # Instead, let's just punt: use the minimum linelength reported by ++ # all of the supported platforms: 8192 (on NT/2K/XP). ++ lt_cv_sys_max_cmd_len=8192; ++ ;; + +-# Only perform the check for file, if the check method requires it +-case $deplibs_check_method in +-file_magic*) +- if test "$file_magic_cmd" = '$MAGIC_CMD'; then +- AC_PATH_MAGIC +- fi +- ;; +-esac ++ amigaos*) ++ # On AmigaOS with pdksh, this test takes hours, literally. ++ # So we just punt and use a minimum line length of 8192. ++ lt_cv_sys_max_cmd_len=8192; ++ ;; + +-_LT_REQUIRED_DARWIN_CHECKS ++ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) ++ # This has been around since 386BSD, at least. Likely further. ++ if test -x /sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` ++ elif test -x /usr/sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` ++ else ++ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs ++ fi ++ # And add a safety zone ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ ;; + +-AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) +-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], +-enable_win32_dll=yes, enable_win32_dll=no) ++ interix*) ++ # We know the value 262144 and hardcode it with a safety zone (like BSD) ++ lt_cv_sys_max_cmd_len=196608 ++ ;; + +-AC_ARG_ENABLE([libtool-lock], +- [AC_HELP_STRING([--disable-libtool-lock], +- [avoid locking (might break parallel builds)])]) +-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes ++ osf*) ++ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure ++ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not ++ # nice to cause kernel panics so lets avoid the loop below. ++ # First set a reasonable default. ++ lt_cv_sys_max_cmd_len=16384 ++ # ++ if test -x /sbin/sysconfig; then ++ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in ++ *1*) lt_cv_sys_max_cmd_len=-1 ;; ++ esac ++ fi ++ ;; ++ sco3.2v5*) ++ lt_cv_sys_max_cmd_len=102400 ++ ;; ++ sysv5* | sco5v6* | sysv4.2uw2*) ++ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` ++ if test -n "$kargmax"; then ++ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` ++ else ++ lt_cv_sys_max_cmd_len=32768 ++ fi ++ ;; ++ *) ++ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` ++ if test -n "$lt_cv_sys_max_cmd_len"; then ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ else ++ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} ++ while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \ ++ = "XX$teststring") >/dev/null 2>&1 && ++ new_result=`expr "X$teststring" : ".*" 2>&1` && ++ lt_cv_sys_max_cmd_len=$new_result && ++ test $i != 17 # 1/2 MB should be enough ++ do ++ i=`expr $i + 1` ++ teststring=$teststring$teststring ++ done ++ teststring= ++ # Add a significant safety factor because C++ compilers can tack on massive ++ # amounts of additional arguments before passing them to the linker. ++ # It appears as though 1/2 is a usable value. ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` ++ fi ++ ;; ++ esac ++]) ++if test -n $lt_cv_sys_max_cmd_len ; then ++ AC_MSG_RESULT($lt_cv_sys_max_cmd_len) ++else ++ AC_MSG_RESULT(none) ++fi ++])# AC_LIBTOOL_SYS_MAX_CMD_LEN + +-AC_ARG_WITH([pic], +- [AC_HELP_STRING([--with-pic], +- [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], +- [pic_mode="$withval"], +- [pic_mode=default]) +-test -z "$pic_mode" && pic_mode=default + +-# Use C for the default configuration in the libtool script +-tagname= +-AC_LIBTOOL_LANG_C_CONFIG +-_LT_AC_TAGCONFIG +-])# AC_LIBTOOL_SETUP ++# _LT_AC_CHECK_DLFCN ++# ------------------ ++AC_DEFUN([_LT_AC_CHECK_DLFCN], ++[AC_CHECK_HEADERS(dlfcn.h)dnl ++])# _LT_AC_CHECK_DLFCN + + +-# _LT_AC_SYS_COMPILER +-# ------------------- +-AC_DEFUN([_LT_AC_SYS_COMPILER], +-[AC_REQUIRE([AC_PROG_CC])dnl ++# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, ++# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) ++# --------------------------------------------------------------------- ++AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], ++[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl ++if test "$cross_compiling" = yes; then : ++ [$4] ++else ++ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 ++ lt_status=$lt_dlunknown ++ cat > conftest.$ac_ext < ++#endif + +-# If no C compiler flags were specified, use CFLAGS. +-LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++#include + +-# Allow CC to be a program name with arguments. +-compiler=$CC +-])# _LT_AC_SYS_COMPILER ++#ifdef RTLD_GLOBAL ++# define LT_DLGLOBAL RTLD_GLOBAL ++#else ++# ifdef DL_GLOBAL ++# define LT_DLGLOBAL DL_GLOBAL ++# else ++# define LT_DLGLOBAL 0 ++# endif ++#endif + ++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we ++ find out it does not work in some platform. */ ++#ifndef LT_DLLAZY_OR_NOW ++# ifdef RTLD_LAZY ++# define LT_DLLAZY_OR_NOW RTLD_LAZY ++# else ++# ifdef DL_LAZY ++# define LT_DLLAZY_OR_NOW DL_LAZY ++# else ++# ifdef RTLD_NOW ++# define LT_DLLAZY_OR_NOW RTLD_NOW ++# else ++# ifdef DL_NOW ++# define LT_DLLAZY_OR_NOW DL_NOW ++# else ++# define LT_DLLAZY_OR_NOW 0 ++# endif ++# endif ++# endif ++# endif ++#endif + +-# _LT_CC_BASENAME(CC) +-# ------------------- +-# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +-AC_DEFUN([_LT_CC_BASENAME], +-[for cc_temp in $1""; do +- case $cc_temp in +- compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; +- distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; +- \-*) ;; +- *) break;; +- esac +-done +-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` +-]) ++#ifdef __cplusplus ++extern "C" void exit (int); ++#endif + ++void fnord() { int i=42;} ++int main () ++{ ++ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); ++ int status = $lt_dlunknown; + +-# _LT_COMPILER_BOILERPLATE +-# ------------------------ +-# Check for compiler boilerplate output or warnings with +-# the simple compiler test code. +-AC_DEFUN([_LT_COMPILER_BOILERPLATE], +-[AC_REQUIRE([LT_AC_PROG_SED])dnl +-ac_outfile=conftest.$ac_objext +-echo "$lt_simple_compile_test_code" >conftest.$ac_ext +-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +-_lt_compiler_boilerplate=`cat conftest.err` +-$rm conftest* +-])# _LT_COMPILER_BOILERPLATE ++ if (self) ++ { ++ if (dlsym (self,"fnord")) status = $lt_dlno_uscore; ++ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; ++ /* dlclose (self); */ ++ } ++ else ++ puts (dlerror ()); ++ ++ exit (status); ++}] ++EOF ++ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then ++ (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null ++ lt_status=$? ++ case x$lt_status in ++ x$lt_dlno_uscore) $1 ;; ++ x$lt_dlneed_uscore) $2 ;; ++ x$lt_dlunknown|x*) $3 ;; ++ esac ++ else : ++ # compilation failed ++ $3 ++ fi ++fi ++rm -fr conftest* ++])# _LT_AC_TRY_DLOPEN_SELF + + +-# _LT_LINKER_BOILERPLATE ++# AC_LIBTOOL_DLOPEN_SELF + # ---------------------- +-# Check for linker boilerplate output or warnings with +-# the simple link test code. +-AC_DEFUN([_LT_LINKER_BOILERPLATE], +-[AC_REQUIRE([LT_AC_PROG_SED])dnl +-ac_outfile=conftest.$ac_objext +-echo "$lt_simple_link_test_code" >conftest.$ac_ext +-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +-_lt_linker_boilerplate=`cat conftest.err` +-$rm -r conftest* +-])# _LT_LINKER_BOILERPLATE ++AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], ++[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl ++if test "x$enable_dlopen" != xyes; then ++ enable_dlopen=unknown ++ enable_dlopen_self=unknown ++ enable_dlopen_self_static=unknown ++else ++ lt_cv_dlopen=no ++ lt_cv_dlopen_libs= + +-# _LT_REQUIRED_DARWIN_CHECKS +-# -------------------------- +-# Check for some things on darwin +-AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS],[ + case $host_os in +- rhapsody* | darwin*) +- AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) +- AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) ++ beos*) ++ lt_cv_dlopen="load_add_on" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes ++ ;; + +- AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], +- [lt_cv_apple_cc_single_mod=no +- if test -z "${LT_MULTI_MODULE}"; then +- # By default we will add the -single_module flag. You can override +- # by either setting the environment variable LT_MULTI_MODULE +- # non-empty at configure time, or by adding -multi_module to the +- # link flags. +- echo "int foo(void){return 1;}" > conftest.c +- $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +- -dynamiclib ${wl}-single_module conftest.c +- if test -f libconftest.dylib; then +- lt_cv_apple_cc_single_mod=yes +- rm -rf libconftest.dylib* +- fi +- rm conftest.c +- fi]) +- AC_CACHE_CHECK([for -exported_symbols_list linker flag], +- [lt_cv_ld_exported_symbols_list], +- [lt_cv_ld_exported_symbols_list=no +- save_LDFLAGS=$LDFLAGS +- echo "_main" > conftest.sym +- LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" +- AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], +- [lt_cv_ld_exported_symbols_list=yes], +- [lt_cv_ld_exported_symbols_list=no]) +- LDFLAGS="$save_LDFLAGS" ++ mingw* | pw32*) ++ lt_cv_dlopen="LoadLibrary" ++ lt_cv_dlopen_libs= ++ ;; ++ ++ cygwin*) ++ lt_cv_dlopen="dlopen" ++ lt_cv_dlopen_libs= ++ ;; ++ ++ darwin*) ++ # if libdl is installed we need to link against it ++ AC_CHECK_LIB([dl], [dlopen], ++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ ++ lt_cv_dlopen="dyld" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes + ]) +- case $host_os in +- rhapsody* | darwin1.[[0123]]) +- _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; +- darwin1.*) +- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; +- darwin*) +- # if running on 10.5 or later, the deployment target defaults +- # to the OS version, if on x86, and 10.4, the deployment +- # target defaults to 10.4. Don't you love it? +- case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in +- 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) +- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; +- 10.[[012]]*) +- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; +- 10.*) +- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; +- esac +- ;; +- esac +- if test "$lt_cv_apple_cc_single_mod" = "yes"; then +- _lt_dar_single_mod='$single_module' +- fi +- if test "$lt_cv_ld_exported_symbols_list" = "yes"; then +- _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' +- else +- _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}" +- fi +- if test "$DSYMUTIL" != ":"; then +- _lt_dsymutil="~$DSYMUTIL \$lib || :" +- else +- _lt_dsymutil= +- fi ++ ;; ++ ++ *) ++ AC_CHECK_FUNC([shl_load], ++ [lt_cv_dlopen="shl_load"], ++ [AC_CHECK_LIB([dld], [shl_load], ++ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], ++ [AC_CHECK_FUNC([dlopen], ++ [lt_cv_dlopen="dlopen"], ++ [AC_CHECK_LIB([dl], [dlopen], ++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], ++ [AC_CHECK_LIB([svld], [dlopen], ++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], ++ [AC_CHECK_LIB([dld], [dld_link], ++ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) ++ ]) ++ ]) ++ ]) ++ ]) ++ ]) + ;; + esac +-]) + +-# _LT_AC_SYS_LIBPATH_AIX +-# ---------------------- +-# Links a minimal program and checks the executable +-# for the system default hardcoded library path. In most cases, +-# this is /usr/lib:/lib, but when the MPI compilers are used +-# the location of the communication and MPI libs are included too. +-# If we don't find anything, use the default library path according +-# to the aix ld manual. +-AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], +-[AC_REQUIRE([LT_AC_PROG_SED])dnl +-AC_LINK_IFELSE(AC_LANG_PROGRAM,[ +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *\(.*\)$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi],[]) +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +-])# _LT_AC_SYS_LIBPATH_AIX ++ if test "x$lt_cv_dlopen" != xno; then ++ enable_dlopen=yes ++ else ++ enable_dlopen=no ++ fi + ++ case $lt_cv_dlopen in ++ dlopen) ++ save_CPPFLAGS="$CPPFLAGS" ++ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + +-# _LT_AC_SHELL_INIT(ARG) +-# ---------------------- +-AC_DEFUN([_LT_AC_SHELL_INIT], +-[ifdef([AC_DIVERSION_NOTICE], +- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], +- [AC_DIVERT_PUSH(NOTICE)]) +-$1 +-AC_DIVERT_POP +-])# _LT_AC_SHELL_INIT ++ save_LDFLAGS="$LDFLAGS" ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + ++ save_LIBS="$LIBS" ++ LIBS="$lt_cv_dlopen_libs $LIBS" + +-# _LT_AC_PROG_ECHO_BACKSLASH +-# -------------------------- +-# Add some code to the start of the generated configure script which +-# will find an echo command which doesn't interpret backslashes. +-AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], +-[_LT_AC_SHELL_INIT([ +-# Check that we are running under the correct shell. +-SHELL=${CONFIG_SHELL-/bin/sh} +- +-case X$ECHO in +-X*--fallback-echo) +- # Remove one level of quotation (which was required for Make). +- ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` +- ;; +-esac ++ AC_CACHE_CHECK([whether a program can dlopen itself], ++ lt_cv_dlopen_self, [dnl ++ _LT_AC_TRY_DLOPEN_SELF( ++ lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, ++ lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) ++ ]) + +-echo=${ECHO-echo} +-if test "X[$]1" = X--no-reexec; then +- # Discard the --no-reexec flag, and continue. +- shift +-elif test "X[$]1" = X--fallback-echo; then +- # Avoid inline document here, it may be left over +- : +-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then +- # Yippee, $echo works! +- : +-else +- # Restart under the correct shell. +- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} +-fi ++ if test "x$lt_cv_dlopen_self" = xyes; then ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" ++ AC_CACHE_CHECK([whether a statically linked program can dlopen itself], ++ lt_cv_dlopen_self_static, [dnl ++ _LT_AC_TRY_DLOPEN_SELF( ++ lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, ++ lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) ++ ]) ++ fi + +-if test "X[$]1" = X--fallback-echo; then +- # used as fallback echo +- shift +- cat </dev/null 2>&1 && unset CDPATH ++ case $lt_cv_dlopen_self in ++ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; ++ *) enable_dlopen_self=unknown ;; ++ esac + +-if test -z "$ECHO"; then +-if test "X${echo_test_string+set}" != Xset; then +-# find a string as large as possible, as long as the shell can cope with it +- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do +- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... +- if (echo_test_string=`eval $cmd`) 2>/dev/null && +- echo_test_string=`eval $cmd` && +- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null +- then +- break +- fi +- done ++ case $lt_cv_dlopen_self_static in ++ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; ++ *) enable_dlopen_self_static=unknown ;; ++ esac + fi ++])# AC_LIBTOOL_DLOPEN_SELF + +-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && +- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- : +-else +- # The Solaris, AIX, and Digital Unix default echo programs unquote +- # backslashes. This makes it impossible to quote backslashes using +- # echo "$something" | sed 's/\\/\\\\/g' +- # +- # So, first we look for a working echo in the user's PATH. + +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +- for dir in $PATH /usr/ucb; do +- IFS="$lt_save_ifs" +- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && +- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && +- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- echo="$dir/echo" +- break +- fi +- done +- IFS="$lt_save_ifs" ++# AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) ++# --------------------------------- ++# Check to see if options -c and -o are simultaneously supported by compiler ++AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], ++[AC_REQUIRE([LT_AC_PROG_SED])dnl ++AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl ++AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], ++ [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], ++ [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no ++ $rm -r conftest 2>/dev/null ++ mkdir conftest ++ cd conftest ++ mkdir out ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + +- if test "X$echo" = Xecho; then +- # We didn't find a better echo, so look for alternatives. +- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && +- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- # This shell has a builtin print -r that does the trick. +- echo='print -r' +- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && +- test "X$CONFIG_SHELL" != X/bin/ksh; then +- # If we have ksh, try running configure again with it. +- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} +- export ORIGINAL_CONFIG_SHELL +- CONFIG_SHELL=/bin/ksh +- export CONFIG_SHELL +- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} +- else +- # Try using printf. +- echo='printf %s\n' +- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && +- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- # Cool, printf works +- : +- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && +- test "X$echo_testing_string" = 'X\t' && +- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL +- export CONFIG_SHELL +- SHELL="$CONFIG_SHELL" +- export SHELL +- echo="$CONFIG_SHELL [$]0 --fallback-echo" +- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && +- test "X$echo_testing_string" = 'X\t' && +- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- echo="$CONFIG_SHELL [$]0 --fallback-echo" +- else +- # maybe with a smaller string... +- prev=: ++ lt_compiler_flag="-o out/conftest2.$ac_objext" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) ++ (eval "$lt_compile" 2>out/conftest.err) ++ ac_status=$? ++ cat out/conftest.err >&AS_MESSAGE_LOG_FD ++ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD ++ if (exit $ac_status) && test -s out/conftest2.$ac_objext ++ then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then ++ _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes ++ fi ++ fi ++ chmod u+w . 2>&AS_MESSAGE_LOG_FD ++ $rm conftest* ++ # SGI C++ compiler will create directory out/ii_files/ for ++ # template instantiation ++ test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files ++ $rm out/* && rmdir out ++ cd .. ++ rmdir conftest ++ $rm conftest* ++]) ++])# AC_LIBTOOL_PROG_CC_C_O + +- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do +- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null +- then +- break +- fi +- prev="$cmd" +- done + +- if test "$prev" != 'sed 50q "[$]0"'; then +- echo_test_string=`eval $prev` +- export echo_test_string +- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} +- else +- # Oops. We lost completely, so just stick with echo. +- echo=echo +- fi +- fi +- fi ++# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) ++# ----------------------------------------- ++# Check to see if we can do hard links to lock some files if needed ++AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], ++[AC_REQUIRE([_LT_AC_LOCK])dnl ++ ++hard_links="nottested" ++if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then ++ # do not overwrite the value of need_locks provided by the user ++ AC_MSG_CHECKING([if we can lock with hard links]) ++ hard_links=yes ++ $rm conftest* ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ touch conftest.a ++ ln conftest.a conftest.b 2>&5 || hard_links=no ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ AC_MSG_RESULT([$hard_links]) ++ if test "$hard_links" = no; then ++ AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) ++ need_locks=warn + fi ++else ++ need_locks=no + fi +-fi ++])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS + +-# Copy echo and quote the copy suitably for passing to libtool from +-# the Makefile, instead of quoting the original, which is used later. +-ECHO=$echo +-if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then +- ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" ++ ++# AC_LIBTOOL_OBJDIR ++# ----------------- ++AC_DEFUN([AC_LIBTOOL_OBJDIR], ++[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], ++[rm -f .libs 2>/dev/null ++mkdir .libs 2>/dev/null ++if test -d .libs; then ++ lt_cv_objdir=.libs ++else ++ # MS-DOS does not allow filenames that begin with a dot. ++ lt_cv_objdir=_libs + fi ++rmdir .libs 2>/dev/null]) ++objdir=$lt_cv_objdir ++])# AC_LIBTOOL_OBJDIR + +-AC_SUBST(ECHO) +-])])# _LT_AC_PROG_ECHO_BACKSLASH +- +- +-# _LT_AC_LOCK +-# ----------- +-AC_DEFUN([_LT_AC_LOCK], +-[AC_ARG_ENABLE([libtool-lock], +- [AC_HELP_STRING([--disable-libtool-lock], +- [avoid locking (might break parallel builds)])]) +-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes +- +-# Some flags need to be propagated to the compiler or linker for good +-# libtool support. +-case $host in +-ia64-*-hpux*) +- # Find out which ABI we are using. +- echo 'int i;' > conftest.$ac_ext +- if AC_TRY_EVAL(ac_compile); then +- case `/usr/bin/file conftest.$ac_objext` in +- *ELF-32*) +- HPUX_IA64_MODE="32" +- ;; +- *ELF-64*) +- HPUX_IA64_MODE="64" +- ;; +- esac +- fi +- rm -rf conftest* +- ;; +-*-*-irix6*) +- # Find out which ABI we are using. +- echo '[#]line __oline__ "configure"' > conftest.$ac_ext +- if AC_TRY_EVAL(ac_compile); then +- if test "$lt_cv_prog_gnu_ld" = yes; then +- case `/usr/bin/file conftest.$ac_objext` in +- *32-bit*) +- LD="${LD-ld} -melf32bsmip" +- ;; +- *N32*) +- LD="${LD-ld} -melf32bmipn32" +- ;; +- *64-bit*) +- LD="${LD-ld} -melf64bmip" +- ;; +- esac +- else +- case `/usr/bin/file conftest.$ac_objext` in +- *32-bit*) +- LD="${LD-ld} -32" +- ;; +- *N32*) +- LD="${LD-ld} -n32" +- ;; +- *64-bit*) +- LD="${LD-ld} -64" +- ;; +- esac +- fi +- fi +- rm -rf conftest* +- ;; + +-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +-s390*-*linux*|sparc*-*linux*) +- # Find out which ABI we are using. +- echo 'int i;' > conftest.$ac_ext +- if AC_TRY_EVAL(ac_compile); then +- case `/usr/bin/file conftest.o` in +- *32-bit*) +- case $host in +- x86_64-*kfreebsd*-gnu) +- LD="${LD-ld} -m elf_i386_fbsd" +- ;; +- x86_64-*linux*) +- LD="${LD-ld} -m elf_i386" +- ;; +- ppc64-*linux*|powerpc64-*linux*) +- LD="${LD-ld} -m elf32ppclinux" +- ;; +- s390x-*linux*) +- LD="${LD-ld} -m elf_s390" +- ;; +- sparc64-*linux*) +- LD="${LD-ld} -m elf32_sparc" +- ;; +- esac +- ;; +- *64-bit*) +- libsuff=64 +- case $host in +- x86_64-*kfreebsd*-gnu) +- LD="${LD-ld} -m elf_x86_64_fbsd" +- ;; +- x86_64-*linux*) +- LD="${LD-ld} -m elf_x86_64" +- ;; +- ppc*-*linux*|powerpc*-*linux*) +- LD="${LD-ld} -m elf64ppc" +- ;; +- s390*-*linux*) +- LD="${LD-ld} -m elf64_s390" +- ;; +- sparc*-*linux*) +- LD="${LD-ld} -m elf64_sparc" +- ;; +- esac +- ;; +- esac +- fi +- rm -rf conftest* +- ;; ++# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) ++# ---------------------------------------------- ++# Check hardcoding attributes. ++AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], ++[AC_MSG_CHECKING([how to hardcode library paths into programs]) ++_LT_AC_TAGVAR(hardcode_action, $1)= ++if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ ++ test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \ ++ test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then + +-*-*-sco3.2v5*) +- # On SCO OpenServer 5, we need -belf to get full-featured binaries. +- SAVE_CFLAGS="$CFLAGS" +- CFLAGS="$CFLAGS -belf" +- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, +- [AC_LANG_PUSH(C) +- AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) +- AC_LANG_POP]) +- if test x"$lt_cv_cc_needs_belf" != x"yes"; then +- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf +- CFLAGS="$SAVE_CFLAGS" +- fi +- ;; +-sparc*-*solaris*) +- # Find out which ABI we are using. +- echo 'int i;' > conftest.$ac_ext +- if AC_TRY_EVAL(ac_compile); then +- case `/usr/bin/file conftest.o` in +- *64-bit*) +- case $lt_cv_prog_gnu_ld in +- yes*) LD="${LD-ld} -m elf64_sparc" ;; +- *) +- if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then +- LD="${LD-ld} -64" +- fi +- ;; +- esac +- ;; +- esac ++ # We can hardcode non-existant directories. ++ if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && ++ # If the only mechanism to avoid hardcoding is shlibpath_var, we ++ # have to relink, otherwise we might link with an installed library ++ # when we should be linking with a yet-to-be-installed one ++ ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && ++ test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then ++ # Linking always hardcodes the temporary library directory. ++ _LT_AC_TAGVAR(hardcode_action, $1)=relink ++ else ++ # We can link without hardcoding, and we can hardcode nonexisting dirs. ++ _LT_AC_TAGVAR(hardcode_action, $1)=immediate + fi +- rm -rf conftest* +- ;; +- +-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], +-[*-*-cygwin* | *-*-mingw* | *-*-pw32*) +- AC_CHECK_TOOL(DLLTOOL, dlltool, false) +- AC_CHECK_TOOL(AS, as, false) +- AC_CHECK_TOOL(OBJDUMP, objdump, false) +- ;; +- ]) +-esac +- +-need_locks="$enable_libtool_lock" +- +-])# _LT_AC_LOCK ++else ++ # We cannot hardcode anything, or else we can only hardcode existing ++ # directories. ++ _LT_AC_TAGVAR(hardcode_action, $1)=unsupported ++fi ++AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) + ++if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then ++ # Fast installation is not supported ++ enable_fast_install=no ++elif test "$shlibpath_overrides_runpath" = yes || ++ test "$enable_shared" = no; then ++ # Fast installation is not necessary ++ enable_fast_install=needless ++fi ++])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH + +-# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +-# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) +-# ---------------------------------------------------------------- +-# Check whether the given compiler option works +-AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], +-[AC_REQUIRE([LT_AC_PROG_SED]) +-AC_CACHE_CHECK([$1], [$2], +- [$2=no +- ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext +- lt_compiler_flag="$3" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- # The option is referenced via a variable to avoid confusing sed. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ +- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) +- (eval "$lt_compile" 2>conftest.err) +- ac_status=$? +- cat conftest.err >&AS_MESSAGE_LOG_FD +- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD +- if (exit $ac_status) && test -s "$ac_outfile"; then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings other than the usual output. +- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp +- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 +- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then +- $2=yes +- fi +- fi +- $rm conftest* +-]) + +-if test x"[$]$2" = xyes; then +- ifelse([$5], , :, [$5]) ++# AC_LIBTOOL_SYS_LIB_STRIP ++# ------------------------ ++AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], ++[striplib= ++old_striplib= ++AC_MSG_CHECKING([whether stripping libraries is possible]) ++if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then ++ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" ++ test -z "$striplib" && striplib="$STRIP --strip-unneeded" ++ AC_MSG_RESULT([yes]) + else +- ifelse([$6], , :, [$6]) ++# FIXME - insert some real tests, host_os isn't really good enough ++ case $host_os in ++ darwin*) ++ if test -n "$STRIP" ; then ++ striplib="$STRIP -x" ++ old_striplib="$STRIP -S" ++ AC_MSG_RESULT([yes]) ++ else ++ AC_MSG_RESULT([no]) + fi +-])# AC_LIBTOOL_COMPILER_OPTION ++ ;; ++ *) ++ AC_MSG_RESULT([no]) ++ ;; ++ esac ++fi ++])# AC_LIBTOOL_SYS_LIB_STRIP + + +-# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +-# [ACTION-SUCCESS], [ACTION-FAILURE]) +-# ------------------------------------------------------------ +-# Check whether the given compiler option works +-AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], ++# AC_LIBTOOL_SYS_DYNAMIC_LINKER ++# ----------------------------- ++# PORTME Fill in your ld.so characteristics ++AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], + [AC_REQUIRE([LT_AC_PROG_SED])dnl +-AC_CACHE_CHECK([$1], [$2], +- [$2=no +- save_LDFLAGS="$LDFLAGS" +- LDFLAGS="$LDFLAGS $3" +- echo "$lt_simple_link_test_code" > conftest.$ac_ext +- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then +- # The linker can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test -s conftest.err; then +- # Append any errors to the config.log. +- cat conftest.err 1>&AS_MESSAGE_LOG_FD +- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp +- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 +- if diff conftest.exp conftest.er2 >/dev/null; then +- $2=yes +- fi +- else +- $2=yes +- fi +- fi +- $rm -r conftest* +- LDFLAGS="$save_LDFLAGS" +-]) +- +-if test x"[$]$2" = xyes; then +- ifelse([$4], , :, [$4]) ++AC_MSG_CHECKING([dynamic linker characteristics]) ++library_names_spec= ++libname_spec='lib$name' ++soname_spec= ++shrext_cmds=".so" ++postinstall_cmds= ++postuninstall_cmds= ++finish_cmds= ++finish_eval= ++shlibpath_var= ++shlibpath_overrides_runpath=unknown ++version_type=none ++dynamic_linker="$host_os ld.so" ++sys_lib_dlsearch_path_spec="/lib /usr/lib" ++m4_if($1,[],[ ++if test "$GCC" = yes; then ++ case $host_os in ++ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; ++ *) lt_awk_arg="/^libraries:/" ;; ++ esac ++ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then ++ # if the path contains ";" then we assume it to be the separator ++ # otherwise default to the standard path separator (i.e. ":") - it is ++ # assumed that no part of a normal pathname contains ";" but that should ++ # okay in the real world where ";" in dirpaths is itself problematic. ++ lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ # Ok, now we have the path, separated by spaces, we can step through it ++ # and add multilib dir if necessary. ++ lt_tmp_lt_search_path_spec= ++ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` ++ for lt_sys_path in $lt_search_path_spec; do ++ if test -d "$lt_sys_path/$lt_multi_os_dir"; then ++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" ++ else ++ test -d "$lt_sys_path" && \ ++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" ++ fi ++ done ++ lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk ' ++BEGIN {RS=" "; FS="/|\n";} { ++ lt_foo=""; ++ lt_count=0; ++ for (lt_i = NF; lt_i > 0; lt_i--) { ++ if ($lt_i != "" && $lt_i != ".") { ++ if ($lt_i == "..") { ++ lt_count++; ++ } else { ++ if (lt_count == 0) { ++ lt_foo="/" $lt_i lt_foo; ++ } else { ++ lt_count--; ++ } ++ } ++ } ++ } ++ if (lt_foo != "") { lt_freq[[lt_foo]]++; } ++ if (lt_freq[[lt_foo]] == 1) { print lt_foo; } ++}'` ++ sys_lib_search_path_spec=`echo $lt_search_path_spec` + else +- ifelse([$5], , :, [$5]) +-fi +-])# AC_LIBTOOL_LINKER_OPTION ++ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" ++fi]) ++need_lib_prefix=unknown ++hardcode_into_libs=no + ++# when you set need_version to no, make sure it does not cause -set_version ++# flags to be left without arguments ++need_version=unknown + +-# AC_LIBTOOL_SYS_MAX_CMD_LEN +-# -------------------------- +-AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], +-[# find the maximum length of command line arguments +-AC_MSG_CHECKING([the maximum length of command line arguments]) +-AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl +- i=0 +- teststring="ABCD" ++case $host_os in ++aix3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' ++ shlibpath_var=LIBPATH + +- case $build_os in +- msdosdjgpp*) +- # On DJGPP, this test can blow up pretty badly due to problems in libc +- # (any single argument exceeding 2000 bytes causes a buffer overrun +- # during glob expansion). Even if it were fixed, the result of this +- # check would be larger than it should be. +- lt_cv_sys_max_cmd_len=12288; # 12K is about right +- ;; ++ # AIX 3 has no versioning support, so we append a major version to the name. ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; + +- gnu*) +- # Under GNU Hurd, this test is not required because there is +- # no limit to the length of command line arguments. +- # Libtool will interpret -1 as no limit whatsoever +- lt_cv_sys_max_cmd_len=-1; +- ;; ++aix[[4-9]]*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ hardcode_into_libs=yes ++ if test "$host_cpu" = ia64; then ++ # AIX 5 supports IA64 ++ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ else ++ # With GCC up to 2.95.x, collect2 would create an import file ++ # for dependence libraries. The import file would start with ++ # the line `#! .'. This would cause the generated library to ++ # depend on `.', always an invalid library. This was fixed in ++ # development snapshots of GCC prior to 3.0. ++ case $host_os in ++ aix4 | aix4.[[01]] | aix4.[[01]].*) ++ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' ++ echo ' yes ' ++ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then ++ : ++ else ++ can_build_shared=no ++ fi ++ ;; ++ esac ++ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct ++ # soname into executable. Probably we can add versioning support to ++ # collect2, so additional links can be useful in future. ++ if test "$aix_use_runtimelinking" = yes; then ++ # If using run time linking (on AIX 4.2 or later) use lib.so ++ # instead of lib.a to let people know that these are not ++ # typical AIX shared libraries. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ else ++ # We preserve .a as extension for shared libraries through AIX4.2 ++ # and later when we are not doing run time linking. ++ library_names_spec='${libname}${release}.a $libname.a' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ fi ++ shlibpath_var=LIBPATH ++ fi ++ ;; + +- cygwin* | mingw*) +- # On Win9x/ME, this test blows up -- it succeeds, but takes +- # about 5 minutes as the teststring grows exponentially. +- # Worse, since 9x/ME are not pre-emptively multitasking, +- # you end up with a "frozen" computer, even though with patience +- # the test eventually succeeds (with a max line length of 256k). +- # Instead, let's just punt: use the minimum linelength reported by +- # all of the supported platforms: 8192 (on NT/2K/XP). +- lt_cv_sys_max_cmd_len=8192; +- ;; ++amigaos*) ++ library_names_spec='$libname.ixlibrary $libname.a' ++ # Create ${libname}_ixlibrary.a entries in /sys/libs. ++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ++ ;; + +- amigaos*) +- # On AmigaOS with pdksh, this test takes hours, literally. +- # So we just punt and use a minimum line length of 8192. +- lt_cv_sys_max_cmd_len=8192; +- ;; ++beos*) ++ library_names_spec='${libname}${shared_ext}' ++ dynamic_linker="$host_os ld.so" ++ shlibpath_var=LIBRARY_PATH ++ ;; + +- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) +- # This has been around since 386BSD, at least. Likely further. +- if test -x /sbin/sysctl; then +- lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` +- elif test -x /usr/sbin/sysctl; then +- lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` +- else +- lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs +- fi +- # And add a safety zone +- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` +- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` +- ;; ++bsdi[[45]]*) ++ version_type=linux ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" ++ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" ++ # the default ld.so.conf also contains /usr/contrib/lib and ++ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow ++ # libtool to hard-code these into programs ++ ;; + +- interix*) +- # We know the value 262144 and hardcode it with a safety zone (like BSD) +- lt_cv_sys_max_cmd_len=196608 +- ;; ++cygwin* | mingw* | pw32*) ++ version_type=windows ++ shrext_cmds=".dll" ++ need_version=no ++ need_lib_prefix=no + +- osf*) +- # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure +- # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not +- # nice to cause kernel panics so lets avoid the loop below. +- # First set a reasonable default. +- lt_cv_sys_max_cmd_len=16384 +- # +- if test -x /sbin/sysconfig; then +- case `/sbin/sysconfig -q proc exec_disable_arg_limit` in +- *1*) lt_cv_sys_max_cmd_len=-1 ;; +- esac +- fi +- ;; +- sco3.2v5*) +- lt_cv_sys_max_cmd_len=102400 +- ;; +- sysv5* | sco5v6* | sysv4.2uw2*) +- kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` +- if test -n "$kargmax"; then +- lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` +- else +- lt_cv_sys_max_cmd_len=32768 +- fi ++ case $GCC,$host_os in ++ yes,cygwin* | yes,mingw* | yes,pw32*) ++ library_names_spec='$libname.dll.a' ++ # DLL is installed to $(libdir)/../bin by postinstall_cmds ++ postinstall_cmds='base_file=`basename \${file}`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ ++ dldir=$destdir/`dirname \$dlpath`~ ++ test -d \$dldir || mkdir -p \$dldir~ ++ $install_prog $dir/$dlname \$dldir/$dlname~ ++ chmod a+x \$dldir/$dlname' ++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ ++ dlpath=$dir/\$dldll~ ++ $rm \$dlpath' ++ shlibpath_overrides_runpath=yes ++ ++ case $host_os in ++ cygwin*) ++ # Cygwin DLLs use 'cyg' prefix rather than 'lib' ++ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ++ ;; ++ mingw*) ++ # MinGW DLLs use traditional 'lib' prefix ++ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then ++ # It is most probably a Windows format PATH printed by ++ # mingw gcc, but we are running on Cygwin. Gcc prints its search ++ # path with ; separators, and with drive letters. We can handle the ++ # drive letters (cygwin fileutils understands them), so leave them, ++ # especially as we might pass files found there to a mingw objdump, ++ # which wouldn't understand a cygwinified path. Ahh. ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ ;; ++ pw32*) ++ # pw32 DLLs use 'pw' prefix rather than 'lib' ++ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ++ ;; ++ esac + ;; ++ + *) +- lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` +- if test -n "$lt_cv_sys_max_cmd_len"; then +- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` +- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` +- else +- SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} +- while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \ +- = "XX$teststring") >/dev/null 2>&1 && +- new_result=`expr "X$teststring" : ".*" 2>&1` && +- lt_cv_sys_max_cmd_len=$new_result && +- test $i != 17 # 1/2 MB should be enough +- do +- i=`expr $i + 1` +- teststring=$teststring$teststring +- done +- teststring= +- # Add a significant safety factor because C++ compilers can tack on massive +- # amounts of additional arguments before passing them to the linker. +- # It appears as though 1/2 is a usable value. +- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` +- fi ++ library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac +-]) +-if test -n $lt_cv_sys_max_cmd_len ; then +- AC_MSG_RESULT($lt_cv_sys_max_cmd_len) +-else +- AC_MSG_RESULT(none) +-fi +-])# AC_LIBTOOL_SYS_MAX_CMD_LEN +- +- +-# _LT_AC_CHECK_DLFCN +-# ------------------ +-AC_DEFUN([_LT_AC_CHECK_DLFCN], +-[AC_CHECK_HEADERS(dlfcn.h)dnl +-])# _LT_AC_CHECK_DLFCN +- +- +-# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +-# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +-# --------------------------------------------------------------------- +-AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], +-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl +-if test "$cross_compiling" = yes; then : +- [$4] +-else +- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 +- lt_status=$lt_dlunknown +- cat > conftest.$ac_ext < +-#endif +- +-#include +- +-#ifdef RTLD_GLOBAL +-# define LT_DLGLOBAL RTLD_GLOBAL +-#else +-# ifdef DL_GLOBAL +-# define LT_DLGLOBAL DL_GLOBAL +-# else +-# define LT_DLGLOBAL 0 +-# endif +-#endif ++ dynamic_linker='Win32 ld.exe' ++ # FIXME: first we should search . and the directory the executable is in ++ shlibpath_var=PATH ++ ;; + +-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we +- find out it does not work in some platform. */ +-#ifndef LT_DLLAZY_OR_NOW +-# ifdef RTLD_LAZY +-# define LT_DLLAZY_OR_NOW RTLD_LAZY +-# else +-# ifdef DL_LAZY +-# define LT_DLLAZY_OR_NOW DL_LAZY +-# else +-# ifdef RTLD_NOW +-# define LT_DLLAZY_OR_NOW RTLD_NOW +-# else +-# ifdef DL_NOW +-# define LT_DLLAZY_OR_NOW DL_NOW +-# else +-# define LT_DLLAZY_OR_NOW 0 +-# endif +-# endif +-# endif +-# endif +-#endif ++darwin* | rhapsody*) ++ dynamic_linker="$host_os dyld" ++ version_type=darwin ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' ++ soname_spec='${libname}${release}${major}$shared_ext' ++ shlibpath_overrides_runpath=yes ++ shlibpath_var=DYLD_LIBRARY_PATH ++ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' ++ m4_if([$1], [],[ ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) ++ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ++ ;; + +-#ifdef __cplusplus +-extern "C" void exit (int); +-#endif ++dgux*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; + +-void fnord() { int i=42;} +-int main () +-{ +- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +- int status = $lt_dlunknown; ++freebsd1*) ++ dynamic_linker=no ++ ;; + +- if (self) +- { +- if (dlsym (self,"fnord")) status = $lt_dlno_uscore; +- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; +- /* dlclose (self); */ +- } ++freebsd* | dragonfly*) ++ # DragonFly does not have aout. When/if they implement a new ++ # versioning mechanism, adjust this. ++ if test -x /usr/bin/objformat; then ++ objformat=`/usr/bin/objformat` + else +- puts (dlerror ()); +- +- exit (status); +-}] +-EOF +- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then +- (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null +- lt_status=$? +- case x$lt_status in +- x$lt_dlno_uscore) $1 ;; +- x$lt_dlneed_uscore) $2 ;; +- x$lt_dlunknown|x*) $3 ;; ++ case $host_os in ++ freebsd[[123]]*) objformat=aout ;; ++ *) objformat=elf ;; + esac +- else : +- # compilation failed +- $3 + fi +-fi +-rm -fr conftest* +-])# _LT_AC_TRY_DLOPEN_SELF +- +- +-# AC_LIBTOOL_DLOPEN_SELF +-# ---------------------- +-AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], +-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl +-if test "x$enable_dlopen" != xyes; then +- enable_dlopen=unknown +- enable_dlopen_self=unknown +- enable_dlopen_self_static=unknown +-else +- lt_cv_dlopen=no +- lt_cv_dlopen_libs= +- ++ version_type=freebsd-$objformat ++ case $version_type in ++ freebsd-elf*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ need_version=no ++ need_lib_prefix=no ++ ;; ++ freebsd-*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' ++ need_version=yes ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY_PATH + case $host_os in +- beos*) +- lt_cv_dlopen="load_add_on" +- lt_cv_dlopen_libs= +- lt_cv_dlopen_self=yes ++ freebsd2*) ++ shlibpath_overrides_runpath=yes + ;; ++ freebsd3.[[01]]* | freebsdelf3.[[01]]*) ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ ++ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ *) # from 4.6 on, and DragonFly ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ esac ++ ;; + +- mingw* | pw32*) +- lt_cv_dlopen="LoadLibrary" +- lt_cv_dlopen_libs= +- ;; ++gnu*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ ;; + +- cygwin*) +- lt_cv_dlopen="dlopen" +- lt_cv_dlopen_libs= +- ;; ++hpux9* | hpux10* | hpux11*) ++ # Give a soname corresponding to the major version so that dld.sl refuses to ++ # link against other versions. ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ case $host_cpu in ++ ia64*) ++ shrext_cmds='.so' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.so" ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ if test "X$HPUX_IA64_MODE" = X32; then ++ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" ++ else ++ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" ++ fi ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ hppa*64*) ++ shrext_cmds='.sl' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ *) ++ shrext_cmds='.sl' ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=SHLIB_PATH ++ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; ++ esac ++ # HP-UX runs *really* slowly unless shared libraries are mode 555. ++ postinstall_cmds='chmod 555 $lib' ++ ;; + +- darwin*) +- # if libdl is installed we need to link against it +- AC_CHECK_LIB([dl], [dlopen], +- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ +- lt_cv_dlopen="dyld" +- lt_cv_dlopen_libs= +- lt_cv_dlopen_self=yes +- ]) +- ;; ++interix[[3-9]]*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; + ++irix5* | irix6* | nonstopux*) ++ case $host_os in ++ nonstopux*) version_type=nonstopux ;; ++ *) ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ version_type=linux ++ else ++ version_type=irix ++ fi ;; ++ esac ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' ++ case $host_os in ++ irix5* | nonstopux*) ++ libsuff= shlibsuff= ++ ;; + *) +- AC_CHECK_FUNC([shl_load], +- [lt_cv_dlopen="shl_load"], +- [AC_CHECK_LIB([dld], [shl_load], +- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], +- [AC_CHECK_FUNC([dlopen], +- [lt_cv_dlopen="dlopen"], +- [AC_CHECK_LIB([dl], [dlopen], +- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], +- [AC_CHECK_LIB([svld], [dlopen], +- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], +- [AC_CHECK_LIB([dld], [dld_link], +- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) +- ]) +- ]) +- ]) +- ]) +- ]) ++ case $LD in # libtool.m4 will add one of these switches to LD ++ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") ++ libsuff= shlibsuff= libmagic=32-bit;; ++ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") ++ libsuff=32 shlibsuff=N32 libmagic=N32;; ++ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") ++ libsuff=64 shlibsuff=64 libmagic=64-bit;; ++ *) libsuff= shlibsuff= libmagic=never-match;; ++ esac + ;; + esac ++ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" ++ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" ++ hardcode_into_libs=yes ++ ;; + +- if test "x$lt_cv_dlopen" != xno; then +- enable_dlopen=yes +- else +- enable_dlopen=no +- fi ++# No shared lib support for Linux oldld, aout, or coff. ++linux*oldld* | linux*aout* | linux*coff*) ++ dynamic_linker=no ++ ;; + +- case $lt_cv_dlopen in +- dlopen) +- save_CPPFLAGS="$CPPFLAGS" +- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" ++# This must be Linux ELF. ++linux* | k*bsd*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ # This implies no fast_install, which is unacceptable. ++ # Some rework will be needed to allow for fast_install ++ # before this can be enabled. ++ hardcode_into_libs=yes + +- save_LDFLAGS="$LDFLAGS" +- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" ++ # Append ld.so.conf contents to the search path ++ if test -f /etc/ld.so.conf; then ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" ++ fi + +- save_LIBS="$LIBS" +- LIBS="$lt_cv_dlopen_libs $LIBS" ++ # We used to test for /lib/ld.so.1 and disable shared libraries on ++ # powerpc, because MkLinux only supported shared libraries with the ++ # GNU dynamic linker. Since this was broken with cross compilers, ++ # most powerpc-linux boxes support dynamic linking these days and ++ # people can always --disable-shared, the test was removed, and we ++ # assume the GNU/Linux dynamic linker is in use. ++ dynamic_linker='GNU/Linux ld.so' ++ ;; + +- AC_CACHE_CHECK([whether a program can dlopen itself], +- lt_cv_dlopen_self, [dnl +- _LT_AC_TRY_DLOPEN_SELF( +- lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, +- lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) +- ]) ++netbsdelf*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='NetBSD ld.elf_so' ++ ;; + +- if test "x$lt_cv_dlopen_self" = xyes; then +- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" +- AC_CACHE_CHECK([whether a statically linked program can dlopen itself], +- lt_cv_dlopen_self_static, [dnl +- _LT_AC_TRY_DLOPEN_SELF( +- lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, +- lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) +- ]) +- fi ++netbsd*) ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ dynamic_linker='NetBSD (a.out) ld.so' ++ else ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='NetBSD ld.elf_so' ++ fi ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; + +- CPPFLAGS="$save_CPPFLAGS" +- LDFLAGS="$save_LDFLAGS" +- LIBS="$save_LIBS" +- ;; +- esac ++newsos6) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ ;; + +- case $lt_cv_dlopen_self in +- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; +- *) enable_dlopen_self=unknown ;; +- esac ++nto-qnx*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ ;; + +- case $lt_cv_dlopen_self_static in +- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; +- *) enable_dlopen_self_static=unknown ;; ++openbsd*) ++ version_type=sunos ++ sys_lib_dlsearch_path_spec="/usr/lib" ++ need_lib_prefix=no ++ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. ++ case $host_os in ++ openbsd3.3 | openbsd3.3.*) need_version=yes ;; ++ *) need_version=no ;; + esac +-fi +-])# AC_LIBTOOL_DLOPEN_SELF +- +- +-# AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) +-# --------------------------------- +-# Check to see if options -c and -o are simultaneously supported by compiler +-AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], +-[AC_REQUIRE([LT_AC_PROG_SED])dnl +-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl +-AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], +- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], +- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no +- $rm -r conftest 2>/dev/null +- mkdir conftest +- cd conftest +- mkdir out +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext +- +- lt_compiler_flag="-o out/conftest2.$ac_objext" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ +- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) +- (eval "$lt_compile" 2>out/conftest.err) +- ac_status=$? +- cat out/conftest.err >&AS_MESSAGE_LOG_FD +- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD +- if (exit $ac_status) && test -s out/conftest2.$ac_objext +- then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp +- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 +- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then +- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes +- fi +- fi +- chmod u+w . 2>&AS_MESSAGE_LOG_FD +- $rm conftest* +- # SGI C++ compiler will create directory out/ii_files/ for +- # template instantiation +- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files +- $rm out/* && rmdir out +- cd .. +- rmdir conftest +- $rm conftest* +-]) +-])# AC_LIBTOOL_PROG_CC_C_O ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ case $host_os in ++ openbsd2.[[89]] | openbsd2.[[89]].*) ++ shlibpath_overrides_runpath=no ++ ;; ++ *) ++ shlibpath_overrides_runpath=yes ++ ;; ++ esac ++ else ++ shlibpath_overrides_runpath=yes ++ fi ++ ;; + ++os2*) ++ libname_spec='$name' ++ shrext_cmds=".dll" ++ need_lib_prefix=no ++ library_names_spec='$libname${shared_ext} $libname.a' ++ dynamic_linker='OS/2 ld.exe' ++ shlibpath_var=LIBPATH ++ ;; + +-# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) +-# ----------------------------------------- +-# Check to see if we can do hard links to lock some files if needed +-AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], +-[AC_REQUIRE([_LT_AC_LOCK])dnl ++osf3* | osf4* | osf5*) ++ version_type=osf ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" ++ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ++ ;; + +-hard_links="nottested" +-if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then +- # do not overwrite the value of need_locks provided by the user +- AC_MSG_CHECKING([if we can lock with hard links]) +- hard_links=yes +- $rm conftest* +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- touch conftest.a +- ln conftest.a conftest.b 2>&5 || hard_links=no +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- AC_MSG_RESULT([$hard_links]) +- if test "$hard_links" = no; then +- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) +- need_locks=warn +- fi +-else +- need_locks=no +-fi +-])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS ++rdos*) ++ dynamic_linker=no ++ ;; + ++solaris*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ # ldd complains unless libraries are executable ++ postinstall_cmds='chmod +x $lib' ++ ;; + +-# AC_LIBTOOL_OBJDIR +-# ----------------- +-AC_DEFUN([AC_LIBTOOL_OBJDIR], +-[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], +-[rm -f .libs 2>/dev/null +-mkdir .libs 2>/dev/null +-if test -d .libs; then +- lt_cv_objdir=.libs +-else +- # MS-DOS does not allow filenames that begin with a dot. +- lt_cv_objdir=_libs +-fi +-rmdir .libs 2>/dev/null]) +-objdir=$lt_cv_objdir +-])# AC_LIBTOOL_OBJDIR ++sunos4*) ++ version_type=sunos ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ if test "$with_gnu_ld" = yes; then ++ need_lib_prefix=no ++ fi ++ need_version=yes ++ ;; + ++sysv4 | sysv4.3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_vendor in ++ sni) ++ shlibpath_overrides_runpath=no ++ need_lib_prefix=no ++ export_dynamic_flag_spec='${wl}-Blargedynsym' ++ runpath_var=LD_RUN_PATH ++ ;; ++ siemens) ++ need_lib_prefix=no ++ ;; ++ motorola) ++ need_lib_prefix=no ++ need_version=no ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ++ ;; ++ esac ++ ;; + +-# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) +-# ---------------------------------------------- +-# Check hardcoding attributes. +-AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], +-[AC_MSG_CHECKING([how to hardcode library paths into programs]) +-_LT_AC_TAGVAR(hardcode_action, $1)= +-if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ +- test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \ +- test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then ++sysv4*MP*) ++ if test -d /usr/nec ;then ++ version_type=linux ++ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' ++ soname_spec='$libname${shared_ext}.$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ fi ++ ;; + +- # We can hardcode non-existant directories. +- if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && +- # If the only mechanism to avoid hardcoding is shlibpath_var, we +- # have to relink, otherwise we might link with an installed library +- # when we should be linking with a yet-to-be-installed one +- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && +- test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then +- # Linking always hardcodes the temporary library directory. +- _LT_AC_TAGVAR(hardcode_action, $1)=relink ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ version_type=freebsd-elf ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ if test "$with_gnu_ld" = yes; then ++ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' ++ shlibpath_overrides_runpath=no + else +- # We can link without hardcoding, and we can hardcode nonexisting dirs. +- _LT_AC_TAGVAR(hardcode_action, $1)=immediate ++ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' ++ shlibpath_overrides_runpath=yes ++ case $host_os in ++ sco3.2v5*) ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ++ ;; ++ esac + fi +-else +- # We cannot hardcode anything, or else we can only hardcode existing +- # directories. +- _LT_AC_TAGVAR(hardcode_action, $1)=unsupported +-fi +-AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) ++ sys_lib_dlsearch_path_spec='/usr/lib' ++ ;; + +-if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then +- # Fast installation is not supported +- enable_fast_install=no +-elif test "$shlibpath_overrides_runpath" = yes || +- test "$enable_shared" = no; then +- # Fast installation is not necessary +- enable_fast_install=needless +-fi +-])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH ++uts4*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; + ++*) ++ dynamic_linker=no ++ ;; ++esac ++AC_MSG_RESULT([$dynamic_linker]) ++test "$dynamic_linker" = no && can_build_shared=no + +-# AC_LIBTOOL_SYS_LIB_STRIP +-# ------------------------ +-AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], +-[striplib= +-old_striplib= +-AC_MSG_CHECKING([whether stripping libraries is possible]) +-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then +- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" +- test -z "$striplib" && striplib="$STRIP --strip-unneeded" +- AC_MSG_RESULT([yes]) +-else +-# FIXME - insert some real tests, host_os isn't really good enough +- case $host_os in +- darwin*) +- if test -n "$STRIP" ; then +- striplib="$STRIP -x" +- old_striplib="$STRIP -S" +- AC_MSG_RESULT([yes]) +- else +- AC_MSG_RESULT([no]) +-fi +- ;; +- *) +- AC_MSG_RESULT([no]) +- ;; +- esac ++AC_CACHE_VAL([lt_cv_sys_lib_search_path_spec], ++[lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"]) ++sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" ++AC_CACHE_VAL([lt_cv_sys_lib_dlsearch_path_spec], ++[lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"]) ++sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" ++ ++variables_saved_for_relink="PATH $shlibpath_var $runpath_var" ++if test "$GCC" = yes; then ++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" + fi +-])# AC_LIBTOOL_SYS_LIB_STRIP ++])# AC_LIBTOOL_SYS_DYNAMIC_LINKER + + +-# AC_LIBTOOL_SYS_DYNAMIC_LINKER +-# ----------------------------- +-# PORTME Fill in your ld.so characteristics +-AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], ++# _LT_AC_TAGCONFIG ++# ---------------- ++AC_DEFUN([_LT_AC_TAGCONFIG], + [AC_REQUIRE([LT_AC_PROG_SED])dnl +-AC_MSG_CHECKING([dynamic linker characteristics]) +-library_names_spec= +-libname_spec='lib$name' +-soname_spec= +-shrext_cmds=".so" +-postinstall_cmds= +-postuninstall_cmds= +-finish_cmds= +-finish_eval= +-shlibpath_var= +-shlibpath_overrides_runpath=unknown +-version_type=none +-dynamic_linker="$host_os ld.so" +-sys_lib_dlsearch_path_spec="/lib /usr/lib" +-m4_if($1,[],[ +-if test "$GCC" = yes; then +- case $host_os in +- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; +- *) lt_awk_arg="/^libraries:/" ;; +- esac +- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then +- # if the path contains ";" then we assume it to be the separator +- # otherwise default to the standard path separator (i.e. ":") - it is +- # assumed that no part of a normal pathname contains ";" but that should +- # okay in the real world where ";" in dirpaths is itself problematic. +- lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'` +- else +- lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++AC_ARG_WITH([tags], ++ [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@], ++ [include additional configurations @<:@automatic@:>@])], ++ [tagnames="$withval"]) ++ ++if test -f "$ltmain" && test -n "$tagnames"; then ++ if test ! -f "${ofile}"; then ++ AC_MSG_WARN([output file `$ofile' does not exist]) + fi +- # Ok, now we have the path, separated by spaces, we can step through it +- # and add multilib dir if necessary. +- lt_tmp_lt_search_path_spec= +- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` +- for lt_sys_path in $lt_search_path_spec; do +- if test -d "$lt_sys_path/$lt_multi_os_dir"; then +- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" ++ ++ if test -z "$LTCC"; then ++ eval "`$SHELL ${ofile} --config | grep '^LTCC='`" ++ if test -z "$LTCC"; then ++ AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) + else +- test -d "$lt_sys_path" && \ +- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" ++ AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) + fi +- done +- lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk ' +-BEGIN {RS=" "; FS="/|\n";} { +- lt_foo=""; +- lt_count=0; +- for (lt_i = NF; lt_i > 0; lt_i--) { +- if ($lt_i != "" && $lt_i != ".") { +- if ($lt_i == "..") { +- lt_count++; +- } else { +- if (lt_count == 0) { +- lt_foo="/" $lt_i lt_foo; +- } else { +- lt_count--; +- } +- } +- } +- } +- if (lt_foo != "") { lt_freq[[lt_foo]]++; } +- if (lt_freq[[lt_foo]] == 1) { print lt_foo; } +-}'` +- sys_lib_search_path_spec=`echo $lt_search_path_spec` +-else +- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +-fi]) +-need_lib_prefix=unknown +-hardcode_into_libs=no +- +-# when you set need_version to no, make sure it does not cause -set_version +-# flags to be left without arguments +-need_version=unknown +- +-case $host_os in +-aix3*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' +- shlibpath_var=LIBPATH ++ fi ++ if test -z "$LTCFLAGS"; then ++ eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`" ++ fi + +- # AIX 3 has no versioning support, so we append a major version to the name. +- soname_spec='${libname}${release}${shared_ext}$major' +- ;; ++ # Extract list of available tagged configurations in $ofile. ++ # Note that this assumes the entire list is on one line. ++ available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` + +-aix[[4-9]]*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- hardcode_into_libs=yes +- if test "$host_cpu" = ia64; then +- # AIX 5 supports IA64 +- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- else +- # With GCC up to 2.95.x, collect2 would create an import file +- # for dependence libraries. The import file would start with +- # the line `#! .'. This would cause the generated library to +- # depend on `.', always an invalid library. This was fixed in +- # development snapshots of GCC prior to 3.0. +- case $host_os in +- aix4 | aix4.[[01]] | aix4.[[01]].*) +- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' +- echo ' yes ' +- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then +- : +- else +- can_build_shared=no +- fi +- ;; ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for tagname in $tagnames; do ++ IFS="$lt_save_ifs" ++ # Check whether tagname contains only valid characters ++ case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in ++ "") ;; ++ *) AC_MSG_ERROR([invalid tag name: $tagname]) ++ ;; + esac +- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct +- # soname into executable. Probably we can add versioning support to +- # collect2, so additional links can be useful in future. +- if test "$aix_use_runtimelinking" = yes; then +- # If using run time linking (on AIX 4.2 or later) use lib.so +- # instead of lib.a to let people know that these are not +- # typical AIX shared libraries. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- else +- # We preserve .a as extension for shared libraries through AIX4.2 +- # and later when we are not doing run time linking. +- library_names_spec='${libname}${release}.a $libname.a' +- soname_spec='${libname}${release}${shared_ext}$major' +- fi +- shlibpath_var=LIBPATH +- fi +- ;; + +-amigaos*) +- library_names_spec='$libname.ixlibrary $libname.a' +- # Create ${libname}_ixlibrary.a entries in /sys/libs. +- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' +- ;; ++ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null ++ then ++ AC_MSG_ERROR([tag name \"$tagname\" already exists]) ++ fi + +-beos*) +- library_names_spec='${libname}${shared_ext}' +- dynamic_linker="$host_os ld.so" +- shlibpath_var=LIBRARY_PATH +- ;; ++ # Update the list of available tags. ++ if test -n "$tagname"; then ++ echo appending configuration tag \"$tagname\" to $ofile + +-bsdi[[45]]*) +- version_type=linux +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" +- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" +- # the default ld.so.conf also contains /usr/contrib/lib and +- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow +- # libtool to hard-code these into programs +- ;; ++ case $tagname in ++ CXX) ++ if test -n "$CXX" && ( test "X$CXX" != "Xno" && ++ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || ++ (test "X$CXX" != "Xg++"))) ; then ++ AC_LIBTOOL_LANG_CXX_CONFIG ++ else ++ tagname="" ++ fi ++ ;; + +-cygwin* | mingw* | pw32*) +- version_type=windows +- shrext_cmds=".dll" +- need_version=no +- need_lib_prefix=no ++ F77) ++ if test -n "$F77" && test "X$F77" != "Xno"; then ++ AC_LIBTOOL_LANG_F77_CONFIG ++ else ++ tagname="" ++ fi ++ ;; + +- case $GCC,$host_os in +- yes,cygwin* | yes,mingw* | yes,pw32*) +- library_names_spec='$libname.dll.a' +- # DLL is installed to $(libdir)/../bin by postinstall_cmds +- postinstall_cmds='base_file=`basename \${file}`~ +- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ +- dldir=$destdir/`dirname \$dlpath`~ +- test -d \$dldir || mkdir -p \$dldir~ +- $install_prog $dir/$dlname \$dldir/$dlname~ +- chmod a+x \$dldir/$dlname' +- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ +- dlpath=$dir/\$dldll~ +- $rm \$dlpath' +- shlibpath_overrides_runpath=yes ++ GCJ) ++ if test -n "$GCJ" && test "X$GCJ" != "Xno"; then ++ AC_LIBTOOL_LANG_GCJ_CONFIG ++ else ++ tagname="" ++ fi ++ ;; + +- case $host_os in +- cygwin*) +- # Cygwin DLLs use 'cyg' prefix rather than 'lib' +- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' +- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" +- ;; +- mingw*) +- # MinGW DLLs use traditional 'lib' prefix +- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' +- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then +- # It is most probably a Windows format PATH printed by +- # mingw gcc, but we are running on Cygwin. Gcc prints its search +- # path with ; separators, and with drive letters. We can handle the +- # drive letters (cygwin fileutils understands them), so leave them, +- # especially as we might pass files found there to a mingw objdump, +- # which wouldn't understand a cygwinified path. Ahh. +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` +- else +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` +- fi +- ;; +- pw32*) +- # pw32 DLLs use 'pw' prefix rather than 'lib' +- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' +- ;; +- esac +- ;; +- +- *) +- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' +- ;; +- esac +- dynamic_linker='Win32 ld.exe' +- # FIXME: first we should search . and the directory the executable is in +- shlibpath_var=PATH +- ;; +- +-darwin* | rhapsody*) +- dynamic_linker="$host_os dyld" +- version_type=darwin +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' +- soname_spec='${libname}${release}${major}$shared_ext' +- shlibpath_overrides_runpath=yes +- shlibpath_var=DYLD_LIBRARY_PATH +- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' +- m4_if([$1], [],[ +- sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) +- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' +- ;; ++ RC) ++ AC_LIBTOOL_LANG_RC_CONFIG ++ ;; + +-dgux*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- ;; ++ *) ++ AC_MSG_ERROR([Unsupported tag name: $tagname]) ++ ;; ++ esac + +-freebsd1*) +- dynamic_linker=no +- ;; ++ # Append the new tag name to the list of available tags. ++ if test -n "$tagname" ; then ++ available_tags="$available_tags $tagname" ++ fi ++ fi ++ done ++ IFS="$lt_save_ifs" + +-freebsd* | dragonfly*) +- # DragonFly does not have aout. When/if they implement a new +- # versioning mechanism, adjust this. +- if test -x /usr/bin/objformat; then +- objformat=`/usr/bin/objformat` ++ # Now substitute the updated list of available tags. ++ if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then ++ mv "${ofile}T" "$ofile" ++ chmod +x "$ofile" + else +- case $host_os in +- freebsd[[123]]*) objformat=aout ;; +- *) objformat=elf ;; +- esac ++ rm -f "${ofile}T" ++ AC_MSG_ERROR([unable to update list of available tagged configurations.]) + fi +- version_type=freebsd-$objformat +- case $version_type in +- freebsd-elf*) +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' +- need_version=no +- need_lib_prefix=no +- ;; +- freebsd-*) +- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' +- need_version=yes +- ;; +- esac +- shlibpath_var=LD_LIBRARY_PATH +- case $host_os in +- freebsd2*) +- shlibpath_overrides_runpath=yes +- ;; +- freebsd3.[[01]]* | freebsdelf3.[[01]]*) +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; +- freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ +- freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- ;; +- *) # from 4.6 on, and DragonFly +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; +- esac +- ;; ++fi ++])# _LT_AC_TAGCONFIG + +-gnu*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- hardcode_into_libs=yes +- ;; + +-hpux9* | hpux10* | hpux11*) +- # Give a soname corresponding to the major version so that dld.sl refuses to +- # link against other versions. +- version_type=sunos +- need_lib_prefix=no +- need_version=no +- case $host_cpu in +- ia64*) +- shrext_cmds='.so' +- hardcode_into_libs=yes +- dynamic_linker="$host_os dld.so" +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- if test "X$HPUX_IA64_MODE" = X32; then +- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" +- else +- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" +- fi +- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec +- ;; +- hppa*64*) +- shrext_cmds='.sl' +- hardcode_into_libs=yes +- dynamic_linker="$host_os dld.sl" +- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH +- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" +- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec +- ;; +- *) +- shrext_cmds='.sl' +- dynamic_linker="$host_os dld.sl" +- shlibpath_var=SHLIB_PATH +- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- ;; +- esac +- # HP-UX runs *really* slowly unless shared libraries are mode 555. +- postinstall_cmds='chmod 555 $lib' +- ;; ++# AC_LIBTOOL_DLOPEN ++# ----------------- ++# enable checks for dlopen support ++AC_DEFUN([AC_LIBTOOL_DLOPEN], ++ [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) ++])# AC_LIBTOOL_DLOPEN + +-interix[[3-9]]*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- ;; + +-irix5* | irix6* | nonstopux*) +- case $host_os in +- nonstopux*) version_type=nonstopux ;; +- *) +- if test "$lt_cv_prog_gnu_ld" = yes; then +- version_type=linux +- else +- version_type=irix +- fi ;; +- esac +- need_lib_prefix=no +- need_version=no +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' +- case $host_os in +- irix5* | nonstopux*) +- libsuff= shlibsuff= +- ;; +- *) +- case $LD in # libtool.m4 will add one of these switches to LD +- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") +- libsuff= shlibsuff= libmagic=32-bit;; +- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") +- libsuff=32 shlibsuff=N32 libmagic=N32;; +- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") +- libsuff=64 shlibsuff=64 libmagic=64-bit;; +- *) libsuff= shlibsuff= libmagic=never-match;; +- esac +- ;; +- esac +- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" +- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" +- hardcode_into_libs=yes +- ;; ++# AC_LIBTOOL_WIN32_DLL ++# -------------------- ++# declare package support for building win32 DLLs ++AC_DEFUN([AC_LIBTOOL_WIN32_DLL], ++[AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) ++])# AC_LIBTOOL_WIN32_DLL + +-# No shared lib support for Linux oldld, aout, or coff. +-linux*oldld* | linux*aout* | linux*coff*) +- dynamic_linker=no +- ;; + +-# This must be Linux ELF. +-linux* | k*bsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- # This implies no fast_install, which is unacceptable. +- # Some rework will be needed to allow for fast_install +- # before this can be enabled. +- hardcode_into_libs=yes +- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" +- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" ++# AC_ENABLE_SHARED([DEFAULT]) ++# --------------------------- ++# implement the --enable-shared flag ++# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. ++AC_DEFUN([AC_ENABLE_SHARED], ++[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl ++AC_ARG_ENABLE([shared], ++ [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], ++ [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], ++ [p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_shared=yes ;; ++ no) enable_shared=no ;; ++ *) ++ enable_shared=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_shared=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac], ++ [enable_shared=]AC_ENABLE_SHARED_DEFAULT) ++])# AC_ENABLE_SHARED + +- # Append ld.so.conf contents to the search path +- if test -f /etc/ld.so.conf; then +- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" +- fi + +- # We used to test for /lib/ld.so.1 and disable shared libraries on +- # powerpc, because MkLinux only supported shared libraries with the +- # GNU dynamic linker. Since this was broken with cross compilers, +- # most powerpc-linux boxes support dynamic linking these days and +- # people can always --disable-shared, the test was removed, and we +- # assume the GNU/Linux dynamic linker is in use. +- dynamic_linker='GNU/Linux ld.so' +- ;; ++# AC_DISABLE_SHARED ++# ----------------- ++# set the default shared flag to --disable-shared ++AC_DEFUN([AC_DISABLE_SHARED], ++[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl ++AC_ENABLE_SHARED(no) ++])# AC_DISABLE_SHARED + +-netbsd*) +- version_type=sunos +- need_lib_prefix=no +- need_version=no +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- dynamic_linker='NetBSD (a.out) ld.so' +- else +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- dynamic_linker='NetBSD ld.elf_so' +- fi +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; + +-newsos6) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- ;; ++# AC_ENABLE_STATIC([DEFAULT]) ++# --------------------------- ++# implement the --enable-static flag ++# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. ++AC_DEFUN([AC_ENABLE_STATIC], ++[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl ++AC_ARG_ENABLE([static], ++ [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], ++ [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], ++ [p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_static=yes ;; ++ no) enable_static=no ;; ++ *) ++ enable_static=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_static=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac], ++ [enable_static=]AC_ENABLE_STATIC_DEFAULT) ++])# AC_ENABLE_STATIC + +-nto-qnx*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- ;; + +-openbsd*) +- version_type=sunos +- sys_lib_dlsearch_path_spec="/usr/lib" +- need_lib_prefix=no +- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. +- case $host_os in +- openbsd3.3 | openbsd3.3.*) need_version=yes ;; +- *) need_version=no ;; +- esac +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- case $host_os in +- openbsd2.[[89]] | openbsd2.[[89]].*) +- shlibpath_overrides_runpath=no +- ;; +- *) +- shlibpath_overrides_runpath=yes +- ;; +- esac +- else +- shlibpath_overrides_runpath=yes +- fi +- ;; ++# AC_DISABLE_STATIC ++# ----------------- ++# set the default static flag to --disable-static ++AC_DEFUN([AC_DISABLE_STATIC], ++[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl ++AC_ENABLE_STATIC(no) ++])# AC_DISABLE_STATIC + +-os2*) +- libname_spec='$name' +- shrext_cmds=".dll" +- need_lib_prefix=no +- library_names_spec='$libname${shared_ext} $libname.a' +- dynamic_linker='OS/2 ld.exe' +- shlibpath_var=LIBPATH +- ;; + +-osf3* | osf4* | osf5*) +- version_type=osf +- need_lib_prefix=no +- need_version=no +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" +- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" +- ;; ++# AC_ENABLE_FAST_INSTALL([DEFAULT]) ++# --------------------------------- ++# implement the --enable-fast-install flag ++# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. ++AC_DEFUN([AC_ENABLE_FAST_INSTALL], ++[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl ++AC_ARG_ENABLE([fast-install], ++ [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], ++ [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], ++ [p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_fast_install=yes ;; ++ no) enable_fast_install=no ;; ++ *) ++ enable_fast_install=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_fast_install=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac], ++ [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) ++])# AC_ENABLE_FAST_INSTALL + +-rdos*) +- dynamic_linker=no +- ;; + +-solaris*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- # ldd complains unless libraries are executable +- postinstall_cmds='chmod +x $lib' +- ;; ++# AC_DISABLE_FAST_INSTALL ++# ----------------------- ++# set the default to --disable-fast-install ++AC_DEFUN([AC_DISABLE_FAST_INSTALL], ++[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl ++AC_ENABLE_FAST_INSTALL(no) ++])# AC_DISABLE_FAST_INSTALL + +-sunos4*) +- version_type=sunos +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- if test "$with_gnu_ld" = yes; then +- need_lib_prefix=no +- fi +- need_version=yes +- ;; + +-sysv4 | sysv4.3*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- case $host_vendor in +- sni) +- shlibpath_overrides_runpath=no +- need_lib_prefix=no +- export_dynamic_flag_spec='${wl}-Blargedynsym' +- runpath_var=LD_RUN_PATH +- ;; +- siemens) +- need_lib_prefix=no +- ;; +- motorola) +- need_lib_prefix=no +- need_version=no +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' +- ;; +- esac +- ;; ++# AC_LIBTOOL_PICMODE([MODE]) ++# -------------------------- ++# implement the --with-pic flag ++# MODE is either `yes' or `no'. If omitted, it defaults to `both'. ++AC_DEFUN([AC_LIBTOOL_PICMODE], ++[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl ++pic_mode=ifelse($#,1,$1,default) ++])# AC_LIBTOOL_PICMODE + +-sysv4*MP*) +- if test -d /usr/nec ;then +- version_type=linux +- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' +- soname_spec='$libname${shared_ext}.$major' +- shlibpath_var=LD_LIBRARY_PATH +- fi +- ;; + +-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) +- version_type=freebsd-elf +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- hardcode_into_libs=yes +- if test "$with_gnu_ld" = yes; then +- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' +- shlibpath_overrides_runpath=no +- else +- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' +- shlibpath_overrides_runpath=yes +- case $host_os in +- sco3.2v5*) +- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" +- ;; +- esac +- fi +- sys_lib_dlsearch_path_spec='/usr/lib' +- ;; ++# AC_PROG_EGREP ++# ------------- ++# This is predefined starting with Autoconf 2.54, so this conditional ++# definition can be removed once we require Autoconf 2.54 or later. ++m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP], ++[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep], ++ [if echo a | (grep -E '(a|b)') >/dev/null 2>&1 ++ then ac_cv_prog_egrep='grep -E' ++ else ac_cv_prog_egrep='egrep' ++ fi]) ++ EGREP=$ac_cv_prog_egrep ++ AC_SUBST([EGREP]) ++])]) + +-uts4*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- ;; + +-*) +- dynamic_linker=no ++# AC_PATH_TOOL_PREFIX ++# ------------------- ++# find a file program which can recognize shared library ++AC_DEFUN([AC_PATH_TOOL_PREFIX], ++[AC_REQUIRE([AC_PROG_EGREP])dnl ++AC_MSG_CHECKING([for $1]) ++AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, ++[case $MAGIC_CMD in ++[[\\/*] | ?:[\\/]*]) ++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +-esac +-AC_MSG_RESULT([$dynamic_linker]) +-test "$dynamic_linker" = no && can_build_shared=no ++*) ++ lt_save_MAGIC_CMD="$MAGIC_CMD" ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++dnl $ac_dummy forces splitting on constant user-supplied paths. ++dnl POSIX.2 word splitting is done only on the output of word expansions, ++dnl not every word. This closes a longstanding sh security hole. ++ ac_dummy="ifelse([$2], , $PATH, [$2])" ++ for ac_dir in $ac_dummy; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$1; then ++ lt_cv_path_MAGIC_CMD="$ac_dir/$1" ++ if test -n "$file_magic_test_file"; then ++ case $deplibs_check_method in ++ "file_magic "*) ++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` ++ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | ++ $EGREP "$file_magic_regex" > /dev/null; then ++ : ++ else ++ cat <&2 + +-AC_CACHE_VAL([lt_cv_sys_lib_search_path_spec], +-[lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"]) +-sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +-AC_CACHE_VAL([lt_cv_sys_lib_dlsearch_path_spec], +-[lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"]) +-sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" ++*** Warning: the command libtool uses to detect shared libraries, ++*** $file_magic_cmd, produces output that libtool cannot recognize. ++*** The result is that libtool may fail to recognize shared libraries ++*** as such. This will affect the creation of libtool libraries that ++*** depend on shared libraries, but programs linked with such libtool ++*** libraries will work regardless of this problem. Nevertheless, you ++*** may want to report the problem to your system manager and/or to ++*** bug-libtool@gnu.org + +-variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +-if test "$GCC" = yes; then +- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" ++EOF ++ fi ;; ++ esac ++ fi ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" ++ MAGIC_CMD="$lt_save_MAGIC_CMD" ++ ;; ++esac]) ++MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++if test -n "$MAGIC_CMD"; then ++ AC_MSG_RESULT($MAGIC_CMD) ++else ++ AC_MSG_RESULT(no) + fi +-])# AC_LIBTOOL_SYS_DYNAMIC_LINKER +- +- +-# _LT_AC_TAGCONFIG +-# ---------------- +-AC_DEFUN([_LT_AC_TAGCONFIG], +-[AC_REQUIRE([LT_AC_PROG_SED])dnl +-AC_ARG_WITH([tags], +- [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@], +- [include additional configurations @<:@automatic@:>@])], +- [tagnames="$withval"]) ++])# AC_PATH_TOOL_PREFIX + +-if test -f "$ltmain" && test -n "$tagnames"; then +- if test ! -f "${ofile}"; then +- AC_MSG_WARN([output file `$ofile' does not exist]) +- fi + +- if test -z "$LTCC"; then +- eval "`$SHELL ${ofile} --config | grep '^LTCC='`" +- if test -z "$LTCC"; then +- AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) +- else +- AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) +- fi +- fi +- if test -z "$LTCFLAGS"; then +- eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`" ++# AC_PATH_MAGIC ++# ------------- ++# find a file program which can recognize a shared library ++AC_DEFUN([AC_PATH_MAGIC], ++[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) ++if test -z "$lt_cv_path_MAGIC_CMD"; then ++ if test -n "$ac_tool_prefix"; then ++ AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) ++ else ++ MAGIC_CMD=: + fi ++fi ++])# AC_PATH_MAGIC + +- # Extract list of available tagged configurations in $ofile. +- # Note that this assumes the entire list is on one line. +- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` + +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for tagname in $tagnames; do ++# AC_PROG_LD ++# ---------- ++# find the pathname to the GNU or non-GNU linker ++AC_DEFUN([AC_PROG_LD], ++[AC_ARG_WITH([gnu-ld], ++ [AC_HELP_STRING([--with-gnu-ld], ++ [assume the C compiler uses GNU ld @<:@default=no@:>@])], ++ [test "$withval" = no || with_gnu_ld=yes], ++ [with_gnu_ld=no]) ++AC_REQUIRE([LT_AC_PROG_SED])dnl ++AC_REQUIRE([AC_PROG_CC])dnl ++AC_REQUIRE([AC_CANONICAL_HOST])dnl ++AC_REQUIRE([AC_CANONICAL_BUILD])dnl ++ac_prog=ld ++if test "$GCC" = yes; then ++ # Check if gcc -print-prog-name=ld gives a path. ++ AC_MSG_CHECKING([for ld used by $CC]) ++ case $host in ++ *-*-mingw*) ++ # gcc leaves a trailing carriage return which upsets mingw ++ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; ++ *) ++ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; ++ esac ++ case $ac_prog in ++ # Accept absolute paths. ++ [[\\/]]* | ?:[[\\/]]*) ++ re_direlt='/[[^/]][[^/]]*/\.\./' ++ # Canonicalize the pathname of ld ++ ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` ++ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ++ ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` ++ done ++ test -z "$LD" && LD="$ac_prog" ++ ;; ++ "") ++ # If it fails, then pretend we aren't using GCC. ++ ac_prog=ld ++ ;; ++ *) ++ # If it is relative, then search for the first ld in PATH. ++ with_gnu_ld=unknown ++ ;; ++ esac ++elif test "$with_gnu_ld" = yes; then ++ AC_MSG_CHECKING([for GNU ld]) ++else ++ AC_MSG_CHECKING([for non-GNU ld]) ++fi ++AC_CACHE_VAL(lt_cv_path_LD, ++[if test -z "$LD"; then ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH; do + IFS="$lt_save_ifs" +- # Check whether tagname contains only valid characters +- case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in +- "") ;; +- *) AC_MSG_ERROR([invalid tag name: $tagname]) ++ test -z "$ac_dir" && ac_dir=. ++ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then ++ lt_cv_path_LD="$ac_dir/$ac_prog" ++ # Check to see if the program is GNU ld. I'd rather use --version, ++ # but apparently some variants of GNU ld only accept -v. ++ # Break only if it was the GNU/non-GNU ld that we prefer. ++ case `"$lt_cv_path_LD" -v 2>&1 /dev/null +- then +- AC_MSG_ERROR([tag name \"$tagname\" already exists]) ++ *) ++ test "$with_gnu_ld" != yes && break ++ ;; ++ esac + fi ++ done ++ IFS="$lt_save_ifs" ++else ++ lt_cv_path_LD="$LD" # Let the user override the test with a path. ++fi]) ++LD="$lt_cv_path_LD" ++if test -n "$LD"; then ++ AC_MSG_RESULT($LD) ++else ++ AC_MSG_RESULT(no) ++fi ++test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) ++AC_PROG_LD_GNU ++])# AC_PROG_LD + +- # Update the list of available tags. +- if test -n "$tagname"; then +- echo appending configuration tag \"$tagname\" to $ofile + +- case $tagname in +- CXX) +- if test -n "$CXX" && ( test "X$CXX" != "Xno" && +- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || +- (test "X$CXX" != "Xg++"))) ; then +- AC_LIBTOOL_LANG_CXX_CONFIG +- else +- tagname="" +- fi +- ;; ++# AC_PROG_LD_GNU ++# -------------- ++AC_DEFUN([AC_PROG_LD_GNU], ++[AC_REQUIRE([AC_PROG_EGREP])dnl ++AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, ++[# I'd rather use --version here, but apparently some GNU lds only accept -v. ++case `$LD -v 2>&1 \"${ofile}T\""; then +- mv "${ofile}T" "$ofile" +- chmod +x "$ofile" ++beos*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++bsdi[[45]]*) ++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' ++ lt_cv_file_magic_cmd='/usr/bin/file -L' ++ lt_cv_file_magic_test_file=/shlib/libc.so ++ ;; ++ ++cygwin*) ++ # func_win32_libid is a shell function defined in ltmain.sh ++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' ++ lt_cv_file_magic_cmd='func_win32_libid' ++ ;; ++ ++mingw* | pw32*) ++ # Base MSYS/MinGW do not provide the 'file' command needed by ++ # func_win32_libid shell function, so use a weaker test based on 'objdump', ++ # unless we find 'file', for example because we are cross-compiling. ++ if ( file / ) >/dev/null 2>&1; then ++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' ++ lt_cv_file_magic_cmd='func_win32_libid' + else +- rm -f "${ofile}T" +- AC_MSG_ERROR([unable to update list of available tagged configurations.]) ++ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' ++ lt_cv_file_magic_cmd='$OBJDUMP -f' + fi +-fi +-])# _LT_AC_TAGCONFIG ++ ;; + ++darwin* | rhapsody*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + +-# AC_LIBTOOL_DLOPEN +-# ----------------- +-# enable checks for dlopen support +-AC_DEFUN([AC_LIBTOOL_DLOPEN], +- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) +-])# AC_LIBTOOL_DLOPEN ++freebsd* | dragonfly*) ++ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then ++ case $host_cpu in ++ i*86 ) ++ # Not sure whether the presence of OpenBSD here was a mistake. ++ # Let's accept both of them until this is cleared up. ++ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' ++ lt_cv_file_magic_cmd=/usr/bin/file ++ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ++ ;; ++ esac ++ else ++ lt_cv_deplibs_check_method=pass_all ++ fi ++ ;; + ++gnu*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + +-# AC_LIBTOOL_WIN32_DLL +-# -------------------- +-# declare package support for building win32 DLLs +-AC_DEFUN([AC_LIBTOOL_WIN32_DLL], +-[AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) +-])# AC_LIBTOOL_WIN32_DLL ++hpux10.20* | hpux11*) ++ lt_cv_file_magic_cmd=/usr/bin/file ++ case $host_cpu in ++ ia64*) ++ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' ++ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ++ ;; ++ hppa*64*) ++ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] ++ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ++ ;; ++ *) ++ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' ++ lt_cv_file_magic_test_file=/usr/lib/libc.sl ++ ;; ++ esac ++ ;; + ++interix[[3-9]]*) ++ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' ++ ;; + +-# AC_ENABLE_SHARED([DEFAULT]) +-# --------------------------- +-# implement the --enable-shared flag +-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +-AC_DEFUN([AC_ENABLE_SHARED], +-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl +-AC_ARG_ENABLE([shared], +- [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], +- [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], +- [p=${PACKAGE-default} +- case $enableval in +- yes) enable_shared=yes ;; +- no) enable_shared=no ;; +- *) +- enable_shared=no +- # Look at the argument we got. We use all the common list separators. +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for pkg in $enableval; do +- IFS="$lt_save_ifs" +- if test "X$pkg" = "X$p"; then +- enable_shared=yes +- fi +- done +- IFS="$lt_save_ifs" +- ;; +- esac], +- [enable_shared=]AC_ENABLE_SHARED_DEFAULT) +-])# AC_ENABLE_SHARED ++irix5* | irix6* | nonstopux*) ++ case $LD in ++ *-32|*"-32 ") libmagic=32-bit;; ++ *-n32|*"-n32 ") libmagic=N32;; ++ *-64|*"-64 ") libmagic=64-bit;; ++ *) libmagic=never-match;; ++ esac ++ lt_cv_deplibs_check_method=pass_all ++ ;; + ++# This must be Linux ELF. ++linux* | k*bsd*-gnu) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + +-# AC_DISABLE_SHARED +-# ----------------- +-# set the default shared flag to --disable-shared +-AC_DEFUN([AC_DISABLE_SHARED], +-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +-AC_ENABLE_SHARED(no) +-])# AC_DISABLE_SHARED ++netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' ++ else ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' ++ fi ++ ;; + ++newos6*) ++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' ++ lt_cv_file_magic_cmd=/usr/bin/file ++ lt_cv_file_magic_test_file=/usr/lib/libnls.so ++ ;; + +-# AC_ENABLE_STATIC([DEFAULT]) +-# --------------------------- +-# implement the --enable-static flag +-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +-AC_DEFUN([AC_ENABLE_STATIC], +-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl +-AC_ARG_ENABLE([static], +- [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], +- [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], +- [p=${PACKAGE-default} +- case $enableval in +- yes) enable_static=yes ;; +- no) enable_static=no ;; +- *) +- enable_static=no +- # Look at the argument we got. We use all the common list separators. +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for pkg in $enableval; do +- IFS="$lt_save_ifs" +- if test "X$pkg" = "X$p"; then +- enable_static=yes +- fi +- done +- IFS="$lt_save_ifs" +- ;; +- esac], +- [enable_static=]AC_ENABLE_STATIC_DEFAULT) +-])# AC_ENABLE_STATIC ++nto-qnx*) ++ lt_cv_deplibs_check_method=unknown ++ ;; + ++openbsd*) ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' ++ else ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' ++ fi ++ ;; + +-# AC_DISABLE_STATIC +-# ----------------- +-# set the default static flag to --disable-static +-AC_DEFUN([AC_DISABLE_STATIC], +-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +-AC_ENABLE_STATIC(no) +-])# AC_DISABLE_STATIC ++osf3* | osf4* | osf5*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + ++rdos*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + +-# AC_ENABLE_FAST_INSTALL([DEFAULT]) +-# --------------------------------- +-# implement the --enable-fast-install flag +-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +-AC_DEFUN([AC_ENABLE_FAST_INSTALL], +-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl +-AC_ARG_ENABLE([fast-install], +- [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], +- [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], +- [p=${PACKAGE-default} +- case $enableval in +- yes) enable_fast_install=yes ;; +- no) enable_fast_install=no ;; +- *) +- enable_fast_install=no +- # Look at the argument we got. We use all the common list separators. +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for pkg in $enableval; do +- IFS="$lt_save_ifs" +- if test "X$pkg" = "X$p"; then +- enable_fast_install=yes +- fi +- done +- IFS="$lt_save_ifs" +- ;; +- esac], +- [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) +-])# AC_ENABLE_FAST_INSTALL ++solaris*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + ++sysv4 | sysv4.3*) ++ case $host_vendor in ++ motorola) ++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' ++ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ++ ;; ++ ncr) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ sequent) ++ lt_cv_file_magic_cmd='/bin/file' ++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ++ ;; ++ sni) ++ lt_cv_file_magic_cmd='/bin/file' ++ lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" ++ lt_cv_file_magic_test_file=/lib/libc.so ++ ;; ++ siemens) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ pc) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ esac ++ ;; + +-# AC_DISABLE_FAST_INSTALL +-# ----------------------- +-# set the default to --disable-fast-install +-AC_DEFUN([AC_DISABLE_FAST_INSTALL], +-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +-AC_ENABLE_FAST_INSTALL(no) +-])# AC_DISABLE_FAST_INSTALL ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++esac ++]) ++file_magic_cmd=$lt_cv_file_magic_cmd ++deplibs_check_method=$lt_cv_deplibs_check_method ++test -z "$deplibs_check_method" && deplibs_check_method=unknown ++])# AC_DEPLIBS_CHECK_METHOD + + +-# AC_LIBTOOL_PICMODE([MODE]) +-# -------------------------- +-# implement the --with-pic flag +-# MODE is either `yes' or `no'. If omitted, it defaults to `both'. +-AC_DEFUN([AC_LIBTOOL_PICMODE], +-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +-pic_mode=ifelse($#,1,$1,default) +-])# AC_LIBTOOL_PICMODE ++# AC_PROG_NM ++# ---------- ++# find the pathname to a BSD-compatible name lister ++AC_DEFUN([AC_PROG_NM], ++[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, ++[if test -n "$NM"; then ++ # Let the user override the test. ++ lt_cv_path_NM="$NM" ++else ++ lt_nm_to_check="${ac_tool_prefix}nm" ++ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then ++ lt_nm_to_check="$lt_nm_to_check nm" ++ fi ++ for lt_tmp_nm in $lt_nm_to_check; do ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ tmp_nm="$ac_dir/$lt_tmp_nm" ++ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then ++ # Check to see if the nm accepts a BSD-compat flag. ++ # Adding the `sed 1q' prevents false positives on HP-UX, which says: ++ # nm: unknown option "B" ignored ++ # Tru64's nm complains that /dev/null is an invalid object file ++ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in ++ */dev/null* | *'Invalid file or object type'*) ++ lt_cv_path_NM="$tmp_nm -B" ++ break ++ ;; ++ *) ++ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in ++ */dev/null*) ++ lt_cv_path_NM="$tmp_nm -p" ++ break ++ ;; ++ *) ++ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but ++ continue # so that we can try to find one that supports BSD flags ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ done ++ IFS="$lt_save_ifs" ++ done ++ test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm ++fi]) ++NM="$lt_cv_path_NM" ++])# AC_PROG_NM + + +-# AC_PROG_EGREP ++# AC_CHECK_LIBM + # ------------- +-# This is predefined starting with Autoconf 2.54, so this conditional +-# definition can be removed once we require Autoconf 2.54 or later. +-m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP], +-[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep], +- [if echo a | (grep -E '(a|b)') >/dev/null 2>&1 +- then ac_cv_prog_egrep='grep -E' +- else ac_cv_prog_egrep='egrep' +- fi]) +- EGREP=$ac_cv_prog_egrep +- AC_SUBST([EGREP]) +-])]) +- +- +-# AC_PATH_TOOL_PREFIX +-# ------------------- +-# find a file program which can recognize shared library +-AC_DEFUN([AC_PATH_TOOL_PREFIX], +-[AC_REQUIRE([AC_PROG_EGREP])dnl +-AC_MSG_CHECKING([for $1]) +-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +-[case $MAGIC_CMD in +-[[\\/*] | ?:[\\/]*]) +- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ++# check for math library ++AC_DEFUN([AC_CHECK_LIBM], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl ++LIBM= ++case $host in ++*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) ++ # These system don't have libm, or don't need it ++ ;; ++*-ncr-sysv4.3*) ++ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") ++ AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") + ;; + *) +- lt_save_MAGIC_CMD="$MAGIC_CMD" +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +-dnl $ac_dummy forces splitting on constant user-supplied paths. +-dnl POSIX.2 word splitting is done only on the output of word expansions, +-dnl not every word. This closes a longstanding sh security hole. +- ac_dummy="ifelse([$2], , $PATH, [$2])" +- for ac_dir in $ac_dummy; do +- IFS="$lt_save_ifs" +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$1; then +- lt_cv_path_MAGIC_CMD="$ac_dir/$1" +- if test -n "$file_magic_test_file"; then +- case $deplibs_check_method in +- "file_magic "*) +- file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` +- MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | +- $EGREP "$file_magic_regex" > /dev/null; then +- : +- else +- cat <&2 +- +-*** Warning: the command libtool uses to detect shared libraries, +-*** $file_magic_cmd, produces output that libtool cannot recognize. +-*** The result is that libtool may fail to recognize shared libraries +-*** as such. This will affect the creation of libtool libraries that +-*** depend on shared libraries, but programs linked with such libtool +-*** libraries will work regardless of this problem. Nevertheless, you +-*** may want to report the problem to your system manager and/or to +-*** bug-libtool@gnu.org +- +-EOF +- fi ;; +- esac +- fi +- break +- fi +- done +- IFS="$lt_save_ifs" +- MAGIC_CMD="$lt_save_MAGIC_CMD" ++ AC_CHECK_LIB(m, cos, LIBM="-lm") + ;; +-esac]) +-MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +-if test -n "$MAGIC_CMD"; then +- AC_MSG_RESULT($MAGIC_CMD) +-else +- AC_MSG_RESULT(no) +-fi +-])# AC_PATH_TOOL_PREFIX ++esac ++])# AC_CHECK_LIBM + + +-# AC_PATH_MAGIC +-# ------------- +-# find a file program which can recognize a shared library +-AC_DEFUN([AC_PATH_MAGIC], +-[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) +-if test -z "$lt_cv_path_MAGIC_CMD"; then +- if test -n "$ac_tool_prefix"; then +- AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) +- else +- MAGIC_CMD=: +- fi +-fi +-])# AC_PATH_MAGIC ++# AC_LIBLTDL_CONVENIENCE([DIRECTORY]) ++# ----------------------------------- ++# sets LIBLTDL to the link flags for the libltdl convenience library and ++# LTDLINCL to the include flags for the libltdl header and adds ++# --enable-ltdl-convenience to the configure arguments. Note that ++# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, ++# it is assumed to be `libltdl'. LIBLTDL will be prefixed with ++# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/' ++# (note the single quotes!). If your package is not flat and you're not ++# using automake, define top_builddir and top_srcdir appropriately in ++# the Makefiles. ++AC_DEFUN([AC_LIBLTDL_CONVENIENCE], ++[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl ++ case $enable_ltdl_convenience in ++ no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; ++ "") enable_ltdl_convenience=yes ++ ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; ++ esac ++ LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la ++ LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) ++ # For backwards non-gettext consistent compatibility... ++ INCLTDL="$LTDLINCL" ++])# AC_LIBLTDL_CONVENIENCE + + +-# AC_PROG_LD +-# ---------- +-# find the pathname to the GNU or non-GNU linker +-AC_DEFUN([AC_PROG_LD], +-[AC_ARG_WITH([gnu-ld], +- [AC_HELP_STRING([--with-gnu-ld], +- [assume the C compiler uses GNU ld @<:@default=no@:>@])], +- [test "$withval" = no || with_gnu_ld=yes], +- [with_gnu_ld=no]) +-AC_REQUIRE([LT_AC_PROG_SED])dnl +-AC_REQUIRE([AC_PROG_CC])dnl +-AC_REQUIRE([AC_CANONICAL_HOST])dnl +-AC_REQUIRE([AC_CANONICAL_BUILD])dnl +-ac_prog=ld +-if test "$GCC" = yes; then +- # Check if gcc -print-prog-name=ld gives a path. +- AC_MSG_CHECKING([for ld used by $CC]) +- case $host in +- *-*-mingw*) +- # gcc leaves a trailing carriage return which upsets mingw +- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; +- *) +- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; +- esac +- case $ac_prog in +- # Accept absolute paths. +- [[\\/]]* | ?:[[\\/]]*) +- re_direlt='/[[^/]][[^/]]*/\.\./' +- # Canonicalize the pathname of ld +- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` +- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do +- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` +- done +- test -z "$LD" && LD="$ac_prog" +- ;; +- "") +- # If it fails, then pretend we aren't using GCC. +- ac_prog=ld +- ;; +- *) +- # If it is relative, then search for the first ld in PATH. +- with_gnu_ld=unknown +- ;; +- esac +-elif test "$with_gnu_ld" = yes; then +- AC_MSG_CHECKING([for GNU ld]) +-else +- AC_MSG_CHECKING([for non-GNU ld]) +-fi +-AC_CACHE_VAL(lt_cv_path_LD, +-[if test -z "$LD"; then +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +- for ac_dir in $PATH; do +- IFS="$lt_save_ifs" +- test -z "$ac_dir" && ac_dir=. +- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then +- lt_cv_path_LD="$ac_dir/$ac_prog" +- # Check to see if the program is GNU ld. I'd rather use --version, +- # but apparently some variants of GNU ld only accept -v. +- # Break only if it was the GNU/non-GNU ld that we prefer. +- case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null 2>&1` ) || ++ (test "X$CXX" != "Xg++"))) ; then ++ AC_PROG_CXXCPP ++fi ++])# _LT_AC_PROG_CXXCPP + +-# AC_DEPLIBS_CHECK_METHOD +-# ----------------------- +-# how to check for library dependencies +-# -- PORTME fill in with the dynamic library characteristics +-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD], +-[AC_CACHE_CHECK([how to recognize dependent libraries], +-lt_cv_deplibs_check_method, +-[lt_cv_file_magic_cmd='$MAGIC_CMD' +-lt_cv_file_magic_test_file= +-lt_cv_deplibs_check_method='unknown' +-# Need to set the preceding variable on all platforms that support +-# interlibrary dependencies. +-# 'none' -- dependencies not supported. +-# `unknown' -- same as none, but documents that we really don't know. +-# 'pass_all' -- all dependencies passed with no checks. +-# 'test_compile' -- check by making test program. +-# 'file_magic [[regex]]' -- check by looking for files in library path +-# which responds to the $file_magic_cmd with a given extended regex. +-# If you have `file' or equivalent on your system and you're not sure +-# whether `pass_all' will *always* work, you probably want this one. ++# AC_LIBTOOL_F77 ++# -------------- ++# enable support for Fortran 77 libraries ++AC_DEFUN([AC_LIBTOOL_F77], ++[AC_REQUIRE([_LT_AC_LANG_F77]) ++])# AC_LIBTOOL_F77 + +-case $host_os in +-aix[[4-9]]*) +- lt_cv_deplibs_check_method=pass_all +- ;; + +-beos*) +- lt_cv_deplibs_check_method=pass_all +- ;; ++# _LT_AC_LANG_F77 ++# --------------- ++AC_DEFUN([_LT_AC_LANG_F77], ++[AC_REQUIRE([AC_PROG_F77]) ++_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77]) ++])# _LT_AC_LANG_F77 + +-bsdi[[45]]*) +- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' +- lt_cv_file_magic_cmd='/usr/bin/file -L' +- lt_cv_file_magic_test_file=/shlib/libc.so +- ;; + +-cygwin*) +- # func_win32_libid is a shell function defined in ltmain.sh +- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' +- lt_cv_file_magic_cmd='func_win32_libid' +- ;; ++# AC_LIBTOOL_GCJ ++# -------------- ++# enable support for GCJ libraries ++AC_DEFUN([AC_LIBTOOL_GCJ], ++[AC_REQUIRE([_LT_AC_LANG_GCJ]) ++])# AC_LIBTOOL_GCJ + +-mingw* | pw32*) +- # Base MSYS/MinGW do not provide the 'file' command needed by +- # func_win32_libid shell function, so use a weaker test based on 'objdump', +- # unless we find 'file', for example because we are cross-compiling. +- if ( file / ) >/dev/null 2>&1; then +- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' +- lt_cv_file_magic_cmd='func_win32_libid' +- else +- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' +- lt_cv_file_magic_cmd='$OBJDUMP -f' +- fi +- ;; + +-darwin* | rhapsody*) +- lt_cv_deplibs_check_method=pass_all +- ;; ++# _LT_AC_LANG_GCJ ++# --------------- ++AC_DEFUN([_LT_AC_LANG_GCJ], ++[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], ++ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], ++ [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], ++ [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], ++ [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], ++ [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) ++_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ]) ++])# _LT_AC_LANG_GCJ + +-freebsd* | dragonfly*) +- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then +- case $host_cpu in +- i*86 ) +- # Not sure whether the presence of OpenBSD here was a mistake. +- # Let's accept both of them until this is cleared up. +- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' +- lt_cv_file_magic_cmd=/usr/bin/file +- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` +- ;; +- esac +- else +- lt_cv_deplibs_check_method=pass_all +- fi +- ;; + +-gnu*) +- lt_cv_deplibs_check_method=pass_all +- ;; ++# AC_LIBTOOL_RC ++# ------------- ++# enable support for Windows resource files ++AC_DEFUN([AC_LIBTOOL_RC], ++[AC_REQUIRE([LT_AC_PROG_RC]) ++_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC]) ++])# AC_LIBTOOL_RC + +-hpux10.20* | hpux11*) +- lt_cv_file_magic_cmd=/usr/bin/file +- case $host_cpu in +- ia64*) +- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' +- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so +- ;; +- hppa*64*) +- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] +- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl +- ;; +- *) +- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' +- lt_cv_file_magic_test_file=/usr/lib/libc.sl +- ;; +- esac +- ;; + +-interix[[3-9]]*) +- # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here +- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' +- ;; ++# AC_LIBTOOL_LANG_C_CONFIG ++# ------------------------ ++# Ensure that the configuration vars for the C compiler are ++# suitably defined. Those variables are subsequently used by ++# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. ++AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) ++AC_DEFUN([_LT_AC_LANG_C_CONFIG], ++[lt_save_CC="$CC" ++AC_LANG_PUSH(C) + +-irix5* | irix6* | nonstopux*) +- case $LD in +- *-32|*"-32 ") libmagic=32-bit;; +- *-n32|*"-n32 ") libmagic=N32;; +- *-64|*"-64 ") libmagic=64-bit;; +- *) libmagic=never-match;; +- esac +- lt_cv_deplibs_check_method=pass_all +- ;; ++# Source file extension for C test sources. ++ac_ext=c + +-# This must be Linux ELF. +-linux* | k*bsd*-gnu) +- lt_cv_deplibs_check_method=pass_all +- ;; ++# Object file extension for compiled C test sources. ++objext=o ++_LT_AC_TAGVAR(objext, $1)=$objext + +-netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then +- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' +- else +- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' +- fi +- ;; ++# Code to be used in simple compile tests ++lt_simple_compile_test_code="int some_variable = 0;" + +-newos6*) +- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' +- lt_cv_file_magic_cmd=/usr/bin/file +- lt_cv_file_magic_test_file=/usr/lib/libnls.so +- ;; ++# Code to be used in simple link tests ++lt_simple_link_test_code='int main(){return(0);}' + +-nto-qnx*) +- lt_cv_deplibs_check_method=unknown +- ;; ++_LT_AC_SYS_COMPILER + +-openbsd*) +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' +- else +- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' +- fi +- ;; ++# save warnings/boilerplate of simple test code ++_LT_COMPILER_BOILERPLATE ++_LT_LINKER_BOILERPLATE + +-osf3* | osf4* | osf5*) +- lt_cv_deplibs_check_method=pass_all +- ;; ++AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) ++AC_LIBTOOL_PROG_COMPILER_PIC($1) ++AC_LIBTOOL_PROG_CC_C_O($1) ++AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) ++AC_LIBTOOL_PROG_LD_SHLIBS($1) ++AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) ++AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) ++AC_LIBTOOL_SYS_LIB_STRIP ++AC_LIBTOOL_DLOPEN_SELF + +-rdos*) +- lt_cv_deplibs_check_method=pass_all +- ;; ++# Report which library types will actually be built ++AC_MSG_CHECKING([if libtool supports shared libraries]) ++AC_MSG_RESULT([$can_build_shared]) + +-solaris*) +- lt_cv_deplibs_check_method=pass_all +- ;; ++AC_MSG_CHECKING([whether to build shared libraries]) ++test "$can_build_shared" = "no" && enable_shared=no + +-sysv4 | sysv4.3*) +- case $host_vendor in +- motorola) +- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' +- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` +- ;; +- ncr) +- lt_cv_deplibs_check_method=pass_all +- ;; +- sequent) +- lt_cv_file_magic_cmd='/bin/file' +- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' +- ;; +- sni) +- lt_cv_file_magic_cmd='/bin/file' +- lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" +- lt_cv_file_magic_test_file=/lib/libc.so +- ;; +- siemens) +- lt_cv_deplibs_check_method=pass_all +- ;; +- pc) +- lt_cv_deplibs_check_method=pass_all +- ;; +- esac ++# On AIX, shared libraries and static libraries use the same namespace, and ++# are all built from PIC. ++case $host_os in ++aix3*) ++ test "$enable_shared" = yes && enable_static=no ++ if test -n "$RANLIB"; then ++ archive_cmds="$archive_cmds~\$RANLIB \$lib" ++ postinstall_cmds='$RANLIB $lib' ++ fi + ;; + +-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) +- lt_cv_deplibs_check_method=pass_all +- ;; ++aix[[4-9]]*) ++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then ++ test "$enable_shared" = yes && enable_static=no ++ fi ++ ;; + esac +-]) +-file_magic_cmd=$lt_cv_file_magic_cmd +-deplibs_check_method=$lt_cv_deplibs_check_method +-test -z "$deplibs_check_method" && deplibs_check_method=unknown +-])# AC_DEPLIBS_CHECK_METHOD ++AC_MSG_RESULT([$enable_shared]) + +- +-# AC_PROG_NM +-# ---------- +-# find the pathname to a BSD-compatible name lister +-AC_DEFUN([AC_PROG_NM], +-[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, +-[if test -n "$NM"; then +- # Let the user override the test. +- lt_cv_path_NM="$NM" +-else +- lt_nm_to_check="${ac_tool_prefix}nm" +- if test -n "$ac_tool_prefix" && test "$build" = "$host"; then +- lt_nm_to_check="$lt_nm_to_check nm" +- fi +- for lt_tmp_nm in $lt_nm_to_check; do +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +- for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do +- IFS="$lt_save_ifs" +- test -z "$ac_dir" && ac_dir=. +- tmp_nm="$ac_dir/$lt_tmp_nm" +- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then +- # Check to see if the nm accepts a BSD-compat flag. +- # Adding the `sed 1q' prevents false positives on HP-UX, which says: +- # nm: unknown option "B" ignored +- # Tru64's nm complains that /dev/null is an invalid object file +- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in +- */dev/null* | *'Invalid file or object type'*) +- lt_cv_path_NM="$tmp_nm -B" +- break +- ;; +- *) +- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in +- */dev/null*) +- lt_cv_path_NM="$tmp_nm -p" +- break +- ;; +- *) +- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but +- continue # so that we can try to find one that supports BSD flags +- ;; +- esac +- ;; +- esac +- fi +- done +- IFS="$lt_save_ifs" +- done +- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm +-fi]) +-NM="$lt_cv_path_NM" +-])# AC_PROG_NM +- +- +-# AC_CHECK_LIBM +-# ------------- +-# check for math library +-AC_DEFUN([AC_CHECK_LIBM], +-[AC_REQUIRE([AC_CANONICAL_HOST])dnl +-LIBM= +-case $host in +-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) +- # These system don't have libm, or don't need it +- ;; +-*-ncr-sysv4.3*) +- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") +- AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") +- ;; +-*) +- AC_CHECK_LIB(m, cos, LIBM="-lm") +- ;; +-esac +-])# AC_CHECK_LIBM +- +- +-# AC_LIBLTDL_CONVENIENCE([DIRECTORY]) +-# ----------------------------------- +-# sets LIBLTDL to the link flags for the libltdl convenience library and +-# LTDLINCL to the include flags for the libltdl header and adds +-# --enable-ltdl-convenience to the configure arguments. Note that +-# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, +-# it is assumed to be `libltdl'. LIBLTDL will be prefixed with +-# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/' +-# (note the single quotes!). If your package is not flat and you're not +-# using automake, define top_builddir and top_srcdir appropriately in +-# the Makefiles. +-AC_DEFUN([AC_LIBLTDL_CONVENIENCE], +-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +- case $enable_ltdl_convenience in +- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; +- "") enable_ltdl_convenience=yes +- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; +- esac +- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la +- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) +- # For backwards non-gettext consistent compatibility... +- INCLTDL="$LTDLINCL" +-])# AC_LIBLTDL_CONVENIENCE +- +- +-# AC_LIBLTDL_INSTALLABLE([DIRECTORY]) +-# ----------------------------------- +-# sets LIBLTDL to the link flags for the libltdl installable library and +-# LTDLINCL to the include flags for the libltdl header and adds +-# --enable-ltdl-install to the configure arguments. Note that +-# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, +-# and an installed libltdl is not found, it is assumed to be `libltdl'. +-# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with +-# '${top_srcdir}/' (note the single quotes!). If your package is not +-# flat and you're not using automake, define top_builddir and top_srcdir +-# appropriately in the Makefiles. +-# In the future, this macro may have to be called after AC_PROG_LIBTOOL. +-AC_DEFUN([AC_LIBLTDL_INSTALLABLE], +-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +- AC_CHECK_LIB(ltdl, lt_dlinit, +- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], +- [if test x"$enable_ltdl_install" = xno; then +- AC_MSG_WARN([libltdl not installed, but installation disabled]) +- else +- enable_ltdl_install=yes +- fi +- ]) +- if test x"$enable_ltdl_install" = x"yes"; then +- ac_configure_args="$ac_configure_args --enable-ltdl-install" +- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la +- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) +- else +- ac_configure_args="$ac_configure_args --enable-ltdl-install=no" +- LIBLTDL="-lltdl" +- LTDLINCL= +- fi +- # For backwards non-gettext consistent compatibility... +- INCLTDL="$LTDLINCL" +-])# AC_LIBLTDL_INSTALLABLE +- +- +-# AC_LIBTOOL_CXX +-# -------------- +-# enable support for C++ libraries +-AC_DEFUN([AC_LIBTOOL_CXX], +-[AC_REQUIRE([_LT_AC_LANG_CXX]) +-])# AC_LIBTOOL_CXX +- +- +-# _LT_AC_LANG_CXX +-# --------------- +-AC_DEFUN([_LT_AC_LANG_CXX], +-[AC_REQUIRE([AC_PROG_CXX]) +-AC_REQUIRE([_LT_AC_PROG_CXXCPP]) +-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) +-])# _LT_AC_LANG_CXX +- +-# _LT_AC_PROG_CXXCPP +-# ------------------ +-AC_DEFUN([_LT_AC_PROG_CXXCPP], +-[ +-AC_REQUIRE([AC_PROG_CXX]) +-if test -n "$CXX" && ( test "X$CXX" != "Xno" && +- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || +- (test "X$CXX" != "Xg++"))) ; then +- AC_PROG_CXXCPP +-fi +-])# _LT_AC_PROG_CXXCPP +- +-# AC_LIBTOOL_F77 +-# -------------- +-# enable support for Fortran 77 libraries +-AC_DEFUN([AC_LIBTOOL_F77], +-[AC_REQUIRE([_LT_AC_LANG_F77]) +-])# AC_LIBTOOL_F77 +- +- +-# _LT_AC_LANG_F77 +-# --------------- +-AC_DEFUN([_LT_AC_LANG_F77], +-[AC_REQUIRE([AC_PROG_F77]) +-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77]) +-])# _LT_AC_LANG_F77 +- +- +-# AC_LIBTOOL_GCJ +-# -------------- +-# enable support for GCJ libraries +-AC_DEFUN([AC_LIBTOOL_GCJ], +-[AC_REQUIRE([_LT_AC_LANG_GCJ]) +-])# AC_LIBTOOL_GCJ +- +- +-# _LT_AC_LANG_GCJ +-# --------------- +-AC_DEFUN([_LT_AC_LANG_GCJ], +-[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], +- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], +- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], +- [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], +- [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], +- [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) +-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ]) +-])# _LT_AC_LANG_GCJ +- +- +-# AC_LIBTOOL_RC +-# ------------- +-# enable support for Windows resource files +-AC_DEFUN([AC_LIBTOOL_RC], +-[AC_REQUIRE([LT_AC_PROG_RC]) +-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC]) +-])# AC_LIBTOOL_RC +- +- +-# AC_LIBTOOL_LANG_C_CONFIG +-# ------------------------ +-# Ensure that the configuration vars for the C compiler are +-# suitably defined. Those variables are subsequently used by +-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +-AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) +-AC_DEFUN([_LT_AC_LANG_C_CONFIG], +-[lt_save_CC="$CC" +-AC_LANG_PUSH(C) +- +-# Source file extension for C test sources. +-ac_ext=c +- +-# Object file extension for compiled C test sources. +-objext=o +-_LT_AC_TAGVAR(objext, $1)=$objext +- +-# Code to be used in simple compile tests +-lt_simple_compile_test_code="int some_variable = 0;" +- +-# Code to be used in simple link tests +-lt_simple_link_test_code='int main(){return(0);}' +- +-_LT_AC_SYS_COMPILER +- +-# save warnings/boilerplate of simple test code +-_LT_COMPILER_BOILERPLATE +-_LT_LINKER_BOILERPLATE +- +-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) +-AC_LIBTOOL_PROG_COMPILER_PIC($1) +-AC_LIBTOOL_PROG_CC_C_O($1) +-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +-AC_LIBTOOL_PROG_LD_SHLIBS($1) +-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +-AC_LIBTOOL_SYS_LIB_STRIP +-AC_LIBTOOL_DLOPEN_SELF +- +-# Report which library types will actually be built +-AC_MSG_CHECKING([if libtool supports shared libraries]) +-AC_MSG_RESULT([$can_build_shared]) +- +-AC_MSG_CHECKING([whether to build shared libraries]) +-test "$can_build_shared" = "no" && enable_shared=no +- +-# On AIX, shared libraries and static libraries use the same namespace, and +-# are all built from PIC. +-case $host_os in +-aix3*) +- test "$enable_shared" = yes && enable_static=no +- if test -n "$RANLIB"; then +- archive_cmds="$archive_cmds~\$RANLIB \$lib" +- postinstall_cmds='$RANLIB $lib' +- fi +- ;; +- +-aix[[4-9]]*) +- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then +- test "$enable_shared" = yes && enable_static=no +- fi +- ;; +-esac +-AC_MSG_RESULT([$enable_shared]) +- +-AC_MSG_CHECKING([whether to build static libraries]) +-# Make sure either enable_shared or enable_static is yes. +-test "$enable_shared" = yes || enable_static=yes +-AC_MSG_RESULT([$enable_static]) ++AC_MSG_CHECKING([whether to build static libraries]) ++# Make sure either enable_shared or enable_static is yes. ++test "$enable_shared" = yes || enable_static=yes ++AC_MSG_RESULT([$enable_static]) + + AC_LIBTOOL_CONFIG($1) + +@@ -5108,7 +4190,7 @@ + ;; + esac + ;; +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= +@@ -6800,7 +5882,7 @@ + ;; + esac + ;; +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + ;; + osf3* | osf4* | osf5*) + case $cc_basename in +@@ -6865,1548 +5947,2481 @@ + *) + ;; + esac +- ;; +- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) +- case $cc_basename in +- CC*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; ++ ;; ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ case $cc_basename in ++ CC*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ esac ++ ;; ++ vxworks*) ++ ;; ++ *) ++ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ++ ;; ++ esac ++ fi ++], ++[ ++ if test "$GCC" = yes; then ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' ++ ++ case $host_os in ++ aix*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ fi ++ ;; ++ ++ amigaos*) ++ # FIXME: we need at least 68020 code to build shared libraries, but ++ # adding the `-m68020' flag to GCC prevents building anything better, ++ # like `-m68040'. ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ++ ;; ++ ++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ # PIC is the default for these OSes. ++ ;; ++ ++ mingw* | cygwin* | pw32* | os2*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ # Although the cygwin gcc ignores -fPIC, still need this for old-style ++ # (--disable-auto-import) libraries ++ m4_if([$1], [GCJ], [], ++ [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ++ ;; ++ ++ darwin* | rhapsody*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ++ ;; ++ ++ interix[[3-9]]*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; ++ ++ msdosdjgpp*) ++ # Just because we use GCC doesn't mean we suddenly get shared libraries ++ # on systems that don't support them. ++ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ++ enable_shared=no ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic ++ fi ++ ;; ++ ++ hpux*) ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ esac ++ ;; ++ ++ *) ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ esac ++ else ++ # PORTME Check for flag to pass linker flags through the system compiler. ++ case $host_os in ++ aix*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ else ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' ++ fi ++ ;; ++ darwin*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ case $cc_basename in ++ xlc*) ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ ;; ++ esac ++ ;; ++ ++ mingw* | cygwin* | pw32* | os2*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ m4_if([$1], [GCJ], [], ++ [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ++ ;; ++ ++ hpux9* | hpux10* | hpux11*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ++ ;; ++ esac ++ # Is there a better lt_prog_compiler_static that works with the bundled CC? ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ++ ;; ++ ++ irix5* | irix6* | nonstopux*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # PIC (with -KPIC) is the default. ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ ++ newsos6) ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ ++ linux* | k*bsd*-gnu) ++ case $cc_basename in ++ icc* | ecc*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' ++ ;; ++ pgcc* | pgf77* | pgf90* | pgf95*) ++ # Portland Group compilers (*not* the Pentium gcc compiler, ++ # which looks to be a dead project) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ ccc*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # All Alpha code is PIC. ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ *) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C 5.9 ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ ;; ++ *Sun\ F*) ++ # Sun Fortran 8.3 passes all unrecognized flags to the linker ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='' ++ ;; ++ esac ++ ;; ++ esac ++ ;; ++ ++ osf3* | osf4* | osf5*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # All OSF/1 code is PIC. ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ ++ rdos*) ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ ++ solaris*) ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ case $cc_basename in ++ f77* | f90* | f95*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; ++ *) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; ++ esac ++ ;; ++ ++ sunos4*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ ++ sysv4 | sysv4.2uw2* | sysv4.3*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec ;then ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ fi ++ ;; ++ ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ ++ unicos*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ++ ;; ++ ++ uts4*) ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ ++ *) ++ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ++ ;; ++ esac ++ fi ++]) ++AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) ++ ++# ++# Check to make sure the PIC flag actually works. ++# ++if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then ++ AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], ++ _LT_AC_TAGVAR(lt_cv_prog_compiler_pic_works, $1), ++ [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [], ++ [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in ++ "" | " "*) ;; ++ *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; ++ esac], ++ [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= ++ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) ++fi ++case $host_os in ++ # For platforms which do not support PIC, -DPIC is meaningless: ++ *djgpp*) ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= ++ ;; ++ *) ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" ++ ;; ++esac ++ ++# ++# Check to make sure the static flag actually works. ++# ++wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\" ++AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], ++ _LT_AC_TAGVAR(lt_cv_prog_compiler_static_works, $1), ++ $lt_tmp_static_flag, ++ [], ++ [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) ++]) ++ ++ ++# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) ++# ------------------------------------ ++# See if the linker supports building shared libraries. ++AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], ++[AC_REQUIRE([LT_AC_PROG_SED])dnl ++AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) ++ifelse([$1],[CXX],[ ++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ case $host_os in ++ aix[[4-9]]*) ++ # If we're using GNU nm, then we don't want the "-C" option. ++ # -C means demangle to AIX nm, but means don't demangle with GNU nm ++ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then ++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' ++ else ++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' ++ fi ++ ;; ++ pw32*) ++ _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" ++ ;; ++ cygwin* | mingw*) ++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' ++ ;; ++ linux* | k*bsd*-gnu) ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=no ++ ;; ++ *) ++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ ;; ++ esac ++ _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] ++],[ ++ runpath_var= ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)= ++ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no ++ _LT_AC_TAGVAR(archive_cmds, $1)= ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)= ++ _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= ++ _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= ++ _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= ++ _LT_AC_TAGVAR(hardcode_direct, $1)=no ++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=no ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown ++ _LT_AC_TAGVAR(hardcode_automatic, $1)=no ++ _LT_AC_TAGVAR(module_cmds, $1)= ++ _LT_AC_TAGVAR(module_expsym_cmds, $1)= ++ _LT_AC_TAGVAR(always_export_symbols, $1)=no ++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ # include_expsyms should be a list of space-separated symbols to be *always* ++ # included in the symbol list ++ _LT_AC_TAGVAR(include_expsyms, $1)= ++ # exclude_expsyms can be an extended regexp of symbols to exclude ++ # it will be wrapped by ` (' and `)$', so one must not match beginning or ++ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', ++ # as well as any symbol that contains `d'. ++ _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] ++ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out ++ # platforms (ab)use it in PIC code, but their linkers get confused if ++ # the symbol is explicitly referenced. Since portable code cannot ++ # rely on this symbol name, it's probably fine to never include it in ++ # preloaded symbol tables. ++ # Exclude shared library initialization/finalization symbols. ++dnl Note also adjust exclude_expsyms for C++ above. ++ extract_expsyms_cmds= ++ # Just being paranoid about ensuring that cc_basename is set. ++ _LT_CC_BASENAME([$compiler]) ++ case $host_os in ++ cygwin* | mingw* | pw32*) ++ # FIXME: the MSVC++ port hasn't been tested in a loooong time ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ if test "$GCC" != yes; then ++ with_gnu_ld=no ++ fi ++ ;; ++ interix*) ++ # we just hope/assume this is gcc and not c89 (= MSVC++) ++ with_gnu_ld=yes ++ ;; ++ openbsd*) ++ with_gnu_ld=no ++ ;; ++ esac ++ ++ _LT_AC_TAGVAR(ld_shlibs, $1)=yes ++ if test "$with_gnu_ld" = yes; then ++ # If archive_cmds runs LD, not CC, wlarc should be empty ++ wlarc='${wl}' ++ ++ # Set some defaults for GNU ld with shared library support. These ++ # are reset later if shared libraries are not supported. Putting them ++ # here allows them to be overridden if necessary. ++ runpath_var=LD_RUN_PATH ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= ++ fi ++ supports_anon_versioning=no ++ case `$LD -v 2>/dev/null` in ++ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 ++ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... ++ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... ++ *\ 2.11.*) ;; # other 2.11 versions ++ *) supports_anon_versioning=yes ;; ++ esac ++ ++ # See if GNU ld supports shared libraries. ++ case $host_os in ++ aix[[3-9]]*) ++ # On AIX/PPC, the GNU linker is very broken ++ if test "$host_cpu" != ia64; then ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ cat <&2 ++ ++*** Warning: the GNU linker, at least up to release 2.9.1, is reported ++*** to be unable to reliably create shared libraries on AIX. ++*** Therefore, libtool is disabling shared libraries support. If you ++*** really care for shared libraries, you may want to modify your PATH ++*** so that a non-GNU linker is found, and then restart. ++ ++EOF ++ fi ++ ;; ++ ++ amigaos*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes ++ ++ # Samuel A. Falvo II reports ++ # that the semantics of dynamic libraries on AmigaOS, at least up ++ # to version 4, is to share data among multiple programs linked ++ # with the same dynamic library. Since this doesn't match the ++ # behavior of shared libraries on other platforms, we can't use ++ # them. ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ ++ beos*) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ else ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ ++ cygwin* | mingw* | pw32*) ++ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, ++ # as there is no search path for DLLs. ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported ++ _LT_AC_TAGVAR(always_export_symbols, $1)=no ++ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' ++ ++ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ # If the export-symbols file already is a .def file (1st line ++ # is EXPORTS), use it as is; otherwise, prepend... ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ cp $export_symbols $output_objdir/$soname.def; ++ else ++ echo EXPORTS > $output_objdir/$soname.def; ++ cat $export_symbols >> $output_objdir/$soname.def; ++ fi~ ++ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ ++ interix[[3-9]]*) ++ _LT_AC_TAGVAR(hardcode_direct, $1)=no ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; ++ ++ gnu* | linux* | k*bsd*-gnu) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ tmp_addflag= ++ case $cc_basename,$host_cpu in ++ pgcc*) # Portland Group C compiler ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag' ++ ;; ++ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag -Mnomain' ;; ++ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 ++ tmp_addflag=' -i_dynamic' ;; ++ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 ++ tmp_addflag=' -i_dynamic -nofor_main' ;; ++ ifc* | ifort*) # Intel Fortran compiler ++ tmp_addflag=' -nofor_main' ;; ++ esac ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) # Sun C 5.9 ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_sharedflag='-G' ;; ++ *Sun\ F*) # Sun Fortran 8.3 ++ tmp_sharedflag='-G' ;; ++ *) ++ tmp_sharedflag='-shared' ;; ++ esac ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ ++ if test $supports_anon_versioning = yes; then ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ $echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' ++ fi ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=no ++ else ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' ++ wlarc= ++ else ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ fi ++ ;; ++ ++ solaris*) ++ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ cat <&2 ++ ++*** Warning: The releases 2.8.* of the GNU linker cannot reliably ++*** create shared libraries on Solaris systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.9.1 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. ++ ++EOF ++ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ ++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) ++ case `$LD -v 2>&1` in ++ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not ++*** reliably create shared libraries on SCO systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.16.91.0.3 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. ++ ++_LT_EOF ++ ;; ++ *) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' ++ else ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ;; ++ ++ sunos4*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ wlarc= ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ ++ *) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ++ if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then ++ runpath_var= ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= ++ fi ++ else ++ # PORTME fill in a description of your system's linker (not GNU ld) ++ case $host_os in ++ aix3*) ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported ++ _LT_AC_TAGVAR(always_export_symbols, $1)=yes ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' ++ # Note: this linker hardcodes the directories in LIBPATH if there ++ # are no directories specified by -L. ++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes ++ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then ++ # Neither direct hardcoding nor static linking is supported with a ++ # broken collect2. ++ _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported ++ fi ++ ;; ++ ++ aix[[4-9]]*) ++ if test "$host_cpu" = ia64; then ++ # On IA64, the linker does run time linking by default, so we don't ++ # have to do anything special. ++ aix_use_runtimelinking=no ++ exp_sym_flag='-Bexport' ++ no_entry_flag="" ++ else ++ # If we're using GNU nm, then we don't want the "-C" option. ++ # -C means demangle to AIX nm, but means don't demangle with GNU nm ++ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then ++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' ++ else ++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' ++ fi ++ aix_use_runtimelinking=no ++ ++ # Test if we are trying to use run time linking or normal ++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we ++ # need to do runtime linking. ++ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) ++ for ld_flag in $LDFLAGS; do ++ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then ++ aix_use_runtimelinking=yes ++ break ++ fi ++ done ++ ;; ++ esac ++ ++ exp_sym_flag='-bexport' ++ no_entry_flag='-bnoentry' ++ fi ++ ++ # When large executables or shared objects are built, AIX ld can ++ # have problems creating the table of contents. If linking a library ++ # or program results in "error TOC overflow" add -mminimal-toc to ++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not ++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. ++ ++ _LT_AC_TAGVAR(archive_cmds, $1)='' ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ++ ++ if test "$GCC" = yes; then ++ case $host_os in aix4.[[012]]|aix4.[[012]].*) ++ # We only want to do this on AIX 4.2 and lower, the check ++ # below for broken collect2 doesn't work under 4.3+ ++ collect2name=`${CC} -print-prog-name=collect2` ++ if test -f "$collect2name" && \ ++ strings "$collect2name" | grep resolve_lib_name >/dev/null ++ then ++ # We have reworked collect2 ++ : ++ else ++ # We have old collect2 ++ _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported ++ # It fails to find uninstalled libraries when the uninstalled ++ # path is not listed in the libpath. Setting hardcode_minus_L ++ # to unsupported forces relinking ++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= ++ fi ++ ;; ++ esac ++ shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi ++ else ++ # not using gcc ++ if test "$host_cpu" = ia64; then ++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release ++ # chokes on -Wl,-G. The following line is correct: ++ shared_flag='-G' ++ else ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag='${wl}-G' ++ else ++ shared_flag='${wl}-bM:SRE' ++ fi ++ fi ++ fi ++ ++ # It seems that -bexpall does not export symbols beginning with ++ # underscore (_), so it is better to generate a list of symbols to export. ++ _LT_AC_TAGVAR(always_export_symbols, $1)=yes ++ if test "$aix_use_runtimelinking" = yes; then ++ # Warning - without using the other runtime loading flags (-brtl), ++ # -berok will link without error, but may produce a broken library. ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' ++ # Determine the default libpath from the value encoded in an empty executable. ++ _LT_AC_SYS_LIBPATH_AIX ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ else ++ if test "$host_cpu" = ia64; then ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" ++ else ++ # Determine the default libpath from the value encoded in an empty executable. ++ _LT_AC_SYS_LIBPATH_AIX ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" ++ # Warning - without using the other run time loading flags, ++ # -berok will link without error, but may produce a broken library. ++ _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' ++ # Exported symbols can be pulled into shared objects from archives ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' ++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes ++ # This is similar to how AIX traditionally builds its shared libraries. ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ fi ++ fi ++ ;; ++ ++ amigaos*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes ++ # see comment about different semantics on the GNU ld section ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ ++ bsdi[[45]]*) ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic ++ ;; ++ ++ cygwin* | mingw* | pw32*) ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ # hardcode_libdir_flag_spec is actually meaningless, as there is ++ # no search path for DLLs. ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' ++ # The linker will automatically build a .lib file if we build a DLL. ++ _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' ++ # FIXME: Should let the user specify the lib program. ++ _LT_AC_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' ++ _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' ++ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ++ ;; ++ ++ darwin* | rhapsody*) ++ case $host_os in ++ rhapsody* | darwin1.[[012]]) ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' ++ ;; ++ *) # Darwin 1.3 on ++ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ else ++ case ${MACOSX_DEPLOYMENT_TARGET} in ++ 10.[[012]]) ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ ;; ++ 10.*) ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' ++ ;; ++ esac ++ fi ++ ;; ++ esac ++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_AC_TAGVAR(hardcode_direct, $1)=no ++ _LT_AC_TAGVAR(hardcode_automatic, $1)=yes ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ++ if test "$GCC" = yes ; then ++ output_verbose_link_cmd='echo' ++ _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" ++ _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" ++ _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" ++ else ++ case $cc_basename in ++ xlc*) ++ output_verbose_link_cmd='echo' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' ++ _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ ;; ++ *) ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ fi ++ ;; ++ ++ dgux*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ ++ freebsd1*) ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ ++ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor ++ # support. Future versions do this automatically, but an explicit c++rt0.o ++ # does not break anything, and helps significantly (at the cost of a little ++ # extra space). ++ freebsd2.2*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ ++ # Unfortunately, older versions of FreeBSD 2 do not have this feature. ++ freebsd2*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ ++ # FreeBSD 3 and greater uses gcc -shared to do shared libraries. ++ freebsd* | dragonfly*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ ++ hpux9*) ++ if test "$GCC" = yes; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ else ++ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ fi ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ ;; ++ ++ hpux10*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ if test "$with_gnu_ld" = no; then ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes ++ fi ++ ;; ++ ++ hpux11*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ case $host_cpu in ++ hppa*64*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ else ++ case $host_cpu in ++ hppa*64*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; + esac +- ;; +- vxworks*) +- ;; +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no +- ;; +- esac +- fi +-], +-[ +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' ++ fi ++ if test "$with_gnu_ld" = no; then ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + +- case $host_os in +- aix*) +- # All AIX code is PIC. +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ case $host_cpu in ++ hppa*64*|ia64*) ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' ++ _LT_AC_TAGVAR(hardcode_direct, $1)=no ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ *) ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes ++ ;; ++ esac + fi + ;; + +- amigaos*) +- # FIXME: we need at least 68020 code to build shared libraries, but +- # adding the `-m68020' flag to GCC prevents building anything better, +- # like `-m68040'. +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ++ irix5* | irix6* | nonstopux*) ++ if test "$GCC" = yes; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' ++ fi ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + +- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) +- # PIC is the default for these OSes. ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out ++ else ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF ++ fi ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + +- mingw* | cygwin* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- # Although the cygwin gcc ignores -fPIC, still need this for old-style +- # (--disable-auto-import) libraries +- m4_if([$1], [GCJ], [], +- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ++ newsos6) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + +- darwin* | rhapsody*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ++ openbsd*) ++ if test -f /usr/libexec/ld.so; then ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ else ++ case $host_os in ++ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ ;; ++ *) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ ;; ++ esac ++ fi ++ else ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ fi + ;; + +- interix[[3-9]]*) +- # Interix 3.x gcc -fpic/-fPIC options generate broken code. +- # Instead, we relocate shared libraries at runtime. ++ os2*) ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported ++ _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' ++ _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + +- msdosdjgpp*) +- # Just because we use GCC doesn't mean we suddenly get shared libraries +- # on systems that don't support them. +- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no +- enable_shared=no ++ osf3*) ++ if test "$GCC" = yes; then ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ fi ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + +- sysv4*MP*) +- if test -d /usr/nec; then +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic ++ osf4* | osf5*) # as osf3* with the addition of -msym flag ++ if test "$GCC" = yes; then ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ else ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ ++ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' ++ ++ # Both c and cxx compiler support -rpath directly ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + fi ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + +- hpux*) +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case $host_cpu in +- hppa*64*|ia64*) +- # +Z the default +- ;; ++ solaris*) ++ _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' ++ if test "$GCC" = yes; then ++ wlarc='${wl}' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ ++ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' ++ else ++ wlarc='' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ ++ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' ++ fi ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ case $host_os in ++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ # The compiler driver will combine and reorder linker options, ++ # but understands `-z linker_flag'. GCC discards it without `$wl', ++ # but is careful enough not to reorder. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ if test "$GCC" = yes; then ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ++ else ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ++ fi + ;; + esac ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' +- ;; +- esac +- else +- # PORTME Check for flag to pass linker flags through the system compiler. +- case $host_os in +- aix*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ sunos4*) ++ if test "x$host_vendor" = xsequent; then ++ # Use $CC to link under sequent, because it throws in some extra .o ++ # files that make .init and .fini sections work. ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi +- ;; +- darwin*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- case $cc_basename in +- xlc*) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- ;; +- esac +- ;; +- +- mingw* | cygwin* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- m4_if([$1], [GCJ], [], +- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + +- hpux9* | hpux10* | hpux11*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case $host_cpu in +- hppa*64*|ia64*) +- # +Z the default ++ sysv4) ++ case $host_vendor in ++ sni) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? + ;; +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ++ siemens) ++ ## LD is ld it makes a PLAMLIB ++ ## CC just makes a GrossModule. ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' ++ _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' ++ _LT_AC_TAGVAR(hardcode_direct, $1)=no ++ ;; ++ motorola) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie + ;; + esac +- # Is there a better lt_prog_compiler_static that works with the bundled CC? +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ++ runpath_var='LD_RUN_PATH' ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + +- irix5* | irix6* | nonstopux*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- # PIC (with -KPIC) is the default. +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ sysv4.3*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' + ;; + +- newsos6) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ runpath_var=LD_RUN_PATH ++ hardcode_runpath_var=yes ++ _LT_AC_TAGVAR(ld_shlibs, $1)=yes ++ fi + ;; + +- linux* | k*bsd*-gnu) +- case $cc_basename in +- icc* | ecc*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' +- ;; +- pgcc* | pgf77* | pgf90* | pgf95*) +- # Portland Group compilers (*not* the Pentium gcc compiler, +- # which looks to be a dead project) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; +- ccc*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- # All Alpha code is PIC. +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' +- ;; +- *) +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) +- # Sun C 5.9 +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- ;; +- *Sun\ F*) +- # Sun Fortran 8.3 passes all unrecognized flags to the linker +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='' +- ;; +- esac +- ;; +- esac +- ;; ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) ++ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ runpath_var='LD_RUN_PATH' + +- osf3* | osf4* | osf5*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- # All OSF/1 code is PIC. +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ if test "$GCC" = yes; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi + ;; + +- rdos*) +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' ++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' ++ runpath_var='LD_RUN_PATH' ++ ++ if test "$GCC" = yes; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi + ;; + +- solaris*) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- case $cc_basename in +- f77* | f90* | f95*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; +- esac ++ uts4*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + +- sunos4*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ *) ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; ++ esac ++ fi ++]) ++AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) ++test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +- sysv4 | sysv4.2uw2* | sysv4.3*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++# ++# Do we need to explicitly link libc? ++# ++case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in ++x|xyes) ++ # Assume -lc should be added ++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes ++ ++ if test "$enable_shared" = yes && test "$GCC" = yes; then ++ case $_LT_AC_TAGVAR(archive_cmds, $1) in ++ *'~'*) ++ # FIXME: we may have to deal with multi-command sequences. + ;; ++ '$CC '*) ++ # Test whether the compiler implicitly links with -lc since on some ++ # systems, -lgcc has to come before -lc. If gcc already passes -lc ++ # to ld, don't add -lc before -lgcc. ++ AC_MSG_CHECKING([whether -lc should be explicitly linked in]) ++ $rm conftest* ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + +- sysv4*MP*) +- if test -d /usr/nec ;then +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then ++ soname=conftest ++ lib=conftest ++ libobjs=conftest.$ac_objext ++ deplibs= ++ wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) ++ pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) ++ compiler_flags=-v ++ linker_flags=-v ++ verstring= ++ output_objdir=. ++ libname=conftest ++ lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)= ++ if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) ++ then ++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ++ else ++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes ++ fi ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag ++ else ++ cat conftest.err 1>&5 + fi +- ;; +- +- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; +- +- unicos*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no +- ;; +- +- uts4*) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; +- +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ++ $rm conftest* ++ AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) + ;; + esac + fi +-]) +-AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) ++ ;; ++esac ++])# AC_LIBTOOL_PROG_LD_SHLIBS + ++ ++# _LT_AC_FILE_LTDLL_C ++# ------------------- ++# Be careful that the start marker always follows a newline. ++AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ ++# /* ltdll.c starts here */ ++# #define WIN32_LEAN_AND_MEAN ++# #include ++# #undef WIN32_LEAN_AND_MEAN ++# #include + # +-# Check to make sure the PIC flag actually works. ++# #ifndef __CYGWIN__ ++# # ifdef __CYGWIN32__ ++# # define __CYGWIN__ __CYGWIN32__ ++# # endif ++# #endif + # +-if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then +- AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], +- _LT_AC_TAGVAR(lt_cv_prog_compiler_pic_works, $1), +- [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [], +- [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in +- "" | " "*) ;; +- *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; +- esac], +- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +-fi +-case $host_os in +- # For platforms which do not support PIC, -DPIC is meaningless: +- *djgpp*) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +- ;; +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" +- ;; +-esac +- ++# #ifdef __cplusplus ++# extern "C" { ++# #endif ++# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); ++# #ifdef __cplusplus ++# } ++# #endif + # +-# Check to make sure the static flag actually works. ++# #ifdef __CYGWIN__ ++# #include ++# DECLARE_CYGWIN_DLL( DllMain ); ++# #endif ++# HINSTANCE __hDllInstance_base; + # +-wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\" +-AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], +- _LT_AC_TAGVAR(lt_cv_prog_compiler_static_works, $1), +- $lt_tmp_static_flag, +- [], +- [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) ++# BOOL APIENTRY ++# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) ++# { ++# __hDllInstance_base = hInst; ++# return TRUE; ++# } ++# /* ltdll.c ends here */ ++])# _LT_AC_FILE_LTDLL_C ++ ++ ++# _LT_AC_TAGVAR(VARNAME, [TAGNAME]) ++# --------------------------------- ++AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])]) ++ ++ ++# old names ++AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) ++AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) ++AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) ++AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) ++AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) ++AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) ++AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) ++ ++# This is just to silence aclocal about the macro not being used ++ifelse([AC_DISABLE_FAST_INSTALL]) ++ ++AC_DEFUN([LT_AC_PROG_GCJ], ++[AC_CHECK_TOOL(GCJ, gcj, no) ++ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" ++ AC_SUBST(GCJFLAGS) + ]) + ++AC_DEFUN([LT_AC_PROG_RC], ++[AC_CHECK_TOOL(RC, windres, no) ++]) + +-# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) +-# ------------------------------------ +-# See if the linker supports building shared libraries. +-AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], +-[AC_REQUIRE([LT_AC_PROG_SED])dnl +-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +-ifelse([$1],[CXX],[ +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- case $host_os in +- aix[[4-9]]*) +- # If we're using GNU nm, then we don't want the "-C" option. +- # -C means demangle to AIX nm, but means don't demangle with GNU nm +- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' +- else +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' +- fi +- ;; +- pw32*) +- _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" +- ;; +- cygwin* | mingw*) +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' +- ;; +- *) +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- ;; +- esac +- _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] +-],[ +- runpath_var= +- _LT_AC_TAGVAR(allow_undefined_flag, $1)= +- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no +- _LT_AC_TAGVAR(archive_cmds, $1)= +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)= +- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= +- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +- _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +- _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown +- _LT_AC_TAGVAR(hardcode_automatic, $1)=no +- _LT_AC_TAGVAR(module_cmds, $1)= +- _LT_AC_TAGVAR(module_expsym_cmds, $1)= +- _LT_AC_TAGVAR(always_export_symbols, $1)=no +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- # include_expsyms should be a list of space-separated symbols to be *always* +- # included in the symbol list +- _LT_AC_TAGVAR(include_expsyms, $1)= +- # exclude_expsyms can be an extended regexp of symbols to exclude +- # it will be wrapped by ` (' and `)$', so one must not match beginning or +- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', +- # as well as any symbol that contains `d'. +- _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] +- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out +- # platforms (ab)use it in PIC code, but their linkers get confused if +- # the symbol is explicitly referenced. Since portable code cannot +- # rely on this symbol name, it's probably fine to never include it in +- # preloaded symbol tables. +- # Exclude shared library initialization/finalization symbols. +-dnl Note also adjust exclude_expsyms for C++ above. +- extract_expsyms_cmds= +- # Just being paranoid about ensuring that cc_basename is set. +- _LT_CC_BASENAME([$compiler]) +- case $host_os in +- cygwin* | mingw* | pw32*) +- # FIXME: the MSVC++ port hasn't been tested in a loooong time +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- if test "$GCC" != yes; then +- with_gnu_ld=no +- fi +- ;; +- interix*) +- # we just hope/assume this is gcc and not c89 (= MSVC++) +- with_gnu_ld=yes +- ;; +- openbsd*) +- with_gnu_ld=no +- ;; +- esac + +- _LT_AC_TAGVAR(ld_shlibs, $1)=yes +- if test "$with_gnu_ld" = yes; then +- # If archive_cmds runs LD, not CC, wlarc should be empty +- wlarc='${wl}' ++# Cheap backport of AS_EXECUTABLE_P and required macros ++# from Autoconf 2.59; we should not use $as_executable_p directly. + +- # Set some defaults for GNU ld with shared library support. These +- # are reset later if shared libraries are not supported. Putting them +- # here allows them to be overridden if necessary. +- runpath_var=LD_RUN_PATH +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' +- # ancient GNU ld didn't support --whole-archive et. al. +- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- else +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= ++# _AS_TEST_PREPARE ++# ---------------- ++m4_ifndef([_AS_TEST_PREPARE], ++[m4_defun([_AS_TEST_PREPARE], ++[if test -x / >/dev/null 2>&1; then ++ as_executable_p='test -x' ++else ++ as_executable_p='test -f' ++fi ++])])# _AS_TEST_PREPARE ++ ++# AS_EXECUTABLE_P ++# --------------- ++# Check whether a file is executable. ++m4_ifndef([AS_EXECUTABLE_P], ++[m4_defun([AS_EXECUTABLE_P], ++[AS_REQUIRE([_AS_TEST_PREPARE])dnl ++$as_executable_p $1[]dnl ++])])# AS_EXECUTABLE_P ++ ++# NOTE: This macro has been submitted for inclusion into # ++# GNU Autoconf as AC_PROG_SED. When it is available in # ++# a released version of Autoconf we should remove this # ++# macro and use it instead. # ++# LT_AC_PROG_SED ++# -------------- ++# Check for a fully-functional sed program, that truncates ++# as few characters as possible. Prefer GNU sed if found. ++AC_DEFUN([LT_AC_PROG_SED], ++[AC_MSG_CHECKING([for a sed that does not truncate output]) ++AC_CACHE_VAL(lt_cv_path_SED, ++[# Loop through the user's path and test for sed and gsed. ++# Then use that list of sed's as ones to test for truncation. ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for lt_ac_prog in sed gsed; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if AS_EXECUTABLE_P(["$as_dir/$lt_ac_prog$ac_exec_ext"]); then ++ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" ++ fi ++ done ++ done ++done ++IFS=$as_save_IFS ++lt_ac_max=0 ++lt_ac_count=0 ++# Add /usr/xpg4/bin/sed as it is typically found on Solaris ++# along with /bin/sed that truncates output. ++for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do ++ test ! -f $lt_ac_sed && continue ++ cat /dev/null > conftest.in ++ lt_ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >conftest.in ++ # Check for GNU sed and select it if it is found. ++ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then ++ lt_cv_path_SED=$lt_ac_sed ++ break ++ fi ++ while true; do ++ cat conftest.in conftest.in >conftest.tmp ++ mv conftest.tmp conftest.in ++ cp conftest.in conftest.nl ++ echo >>conftest.nl ++ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break ++ cmp -s conftest.out conftest.nl || break ++ # 10000 chars as input seems more than enough ++ test $lt_ac_count -gt 10 && break ++ lt_ac_count=`expr $lt_ac_count + 1` ++ if test $lt_ac_count -gt $lt_ac_max; then ++ lt_ac_max=$lt_ac_count ++ lt_cv_path_SED=$lt_ac_sed + fi +- supports_anon_versioning=no +- case `$LD -v 2>/dev/null` in +- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 +- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... +- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... +- *\ 2.11.*) ;; # other 2.11 versions +- *) supports_anon_versioning=yes ;; +- esac +- +- # See if GNU ld supports shared libraries. +- case $host_os in +- aix[[3-9]]*) +- # On AIX/PPC, the GNU linker is very broken +- if test "$host_cpu" != ia64; then +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- cat <&2 ++ done ++done ++]) ++SED=$lt_cv_path_SED ++AC_SUBST([SED]) ++AC_MSG_RESULT([$SED]) ++]) + +-*** Warning: the GNU linker, at least up to release 2.9.1, is reported +-*** to be unable to reliably create shared libraries on AIX. +-*** Therefore, libtool is disabling shared libraries support. If you +-*** really care for shared libraries, you may want to modify your PATH +-*** so that a non-GNU linker is found, and then restart. ++# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- ++# ++# Copyright © 2004 Scott James Remnant . ++# ++# This program is free software; you can redistribute it and/or modify ++# it under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 2 of the License, or ++# (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, but ++# WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++# General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++# ++# As a special exception to the GNU General Public License, if you ++# distribute this file as part of a program that contains a ++# configuration script generated by Autoconf, you may include it under ++# the same distribution terms that you use for the rest of that program. + +-EOF +- fi +- ;; ++# PKG_PROG_PKG_CONFIG([MIN-VERSION]) ++# ---------------------------------- ++AC_DEFUN([PKG_PROG_PKG_CONFIG], ++[m4_pattern_forbid([^_?PKG_[A-Z_]+$]) ++m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) ++AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl ++if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then ++ AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) ++fi ++if test -n "$PKG_CONFIG"; then ++ _pkg_min_version=m4_default([$1], [0.9.0]) ++ AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) ++ if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then ++ AC_MSG_RESULT([yes]) ++ else ++ AC_MSG_RESULT([no]) ++ PKG_CONFIG="" ++ fi ++ ++fi[]dnl ++])# PKG_PROG_PKG_CONFIG + +- amigaos*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes ++# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) ++# ++# Check to see whether a particular set of modules exists. Similar ++# to PKG_CHECK_MODULES(), but does not set variables or print errors. ++# ++# ++# Similar to PKG_CHECK_MODULES, make sure that the first instance of ++# this or PKG_CHECK_MODULES is called, or make sure to call ++# PKG_CHECK_EXISTS manually ++# -------------------------------------------------------------- ++AC_DEFUN([PKG_CHECK_EXISTS], ++[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl ++if test -n "$PKG_CONFIG" && \ ++ AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then ++ m4_ifval([$2], [$2], [:]) ++m4_ifvaln([$3], [else ++ $3])dnl ++fi]) + +- # Samuel A. Falvo II reports +- # that the semantics of dynamic libraries on AmigaOS, at least up +- # to version 4, is to share data among multiple programs linked +- # with the same dynamic library. Since this doesn't match the +- # behavior of shared libraries on other platforms, we can't use +- # them. +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; + +- beos*) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported +- # Joseph Beckenbach says some releases of gcc +- # support --undefined. This deserves some investigation. FIXME +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; ++# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) ++# --------------------------------------------- ++m4_define([_PKG_CONFIG], ++[if test -n "$PKG_CONFIG"; then ++ if test -n "$$1"; then ++ pkg_cv_[]$1="$$1" ++ else ++ PKG_CHECK_EXISTS([$3], ++ [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], ++ [pkg_failed=yes]) ++ fi ++else ++ pkg_failed=untried ++fi[]dnl ++])# _PKG_CONFIG + +- cygwin* | mingw* | pw32*) +- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, +- # as there is no search path for DLLs. +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported +- _LT_AC_TAGVAR(always_export_symbols, $1)=no +- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' ++# _PKG_SHORT_ERRORS_SUPPORTED ++# ----------------------------- ++AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], ++[AC_REQUIRE([PKG_PROG_PKG_CONFIG]) ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi[]dnl ++])# _PKG_SHORT_ERRORS_SUPPORTED + +- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- # If the export-symbols file already is a .def file (1st line +- # is EXPORTS), use it as is; otherwise, prepend... +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +- cp $export_symbols $output_objdir/$soname.def; +- else +- echo EXPORTS > $output_objdir/$soname.def; +- cat $export_symbols >> $output_objdir/$soname.def; +- fi~ +- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; + +- interix[[3-9]]*) +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' +- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. +- # Instead, shared libraries are loaded at an image base (0x10000000 by +- # default) and relocated if they conflict, which is a slow very memory +- # consuming and fragmenting process. To avoid this, we pick a random, +- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link +- # time. Moving up from 0x10000000 also allows more sbrk(2) space. +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' +- ;; ++# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], ++# [ACTION-IF-NOT-FOUND]) ++# ++# ++# Note that if there is a possibility the first call to ++# PKG_CHECK_MODULES might not happen, you should be sure to include an ++# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac ++# ++# ++# -------------------------------------------------------------- ++AC_DEFUN([PKG_CHECK_MODULES], ++[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl ++AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl ++AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl + +- gnu* | linux* | k*bsd*-gnu) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- tmp_addflag= +- case $cc_basename,$host_cpu in +- pgcc*) # Portland Group C compiler +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- tmp_addflag=' $pic_flag' +- ;; +- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- tmp_addflag=' $pic_flag -Mnomain' ;; +- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 +- tmp_addflag=' -i_dynamic' ;; +- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 +- tmp_addflag=' -i_dynamic -nofor_main' ;; +- ifc* | ifort*) # Intel Fortran compiler +- tmp_addflag=' -nofor_main' ;; +- esac +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) # Sun C 5.9 +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- tmp_sharedflag='-G' ;; +- *Sun\ F*) # Sun Fortran 8.3 +- tmp_sharedflag='-G' ;; +- *) +- tmp_sharedflag='-shared' ;; +- esac +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++pkg_failed=no ++AC_MSG_CHECKING([for $1]) + +- if test $supports_anon_versioning = yes; then +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ +- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ +- $echo "local: *; };" >> $output_objdir/$libname.ver~ +- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' +- fi +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; ++_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) ++_PKG_CONFIG([$1][_LIBS], [libs], [$2]) + +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' +- wlarc= +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- fi +- ;; ++m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS ++and $1[]_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details.]) + +- solaris*) +- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- cat <&2 ++if test $pkg_failed = yes; then ++ _PKG_SHORT_ERRORS_SUPPORTED ++ if test $_pkg_short_errors_supported = yes; then ++ $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$2"` ++ else ++ $1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD + +-*** Warning: The releases 2.8.* of the GNU linker cannot reliably +-*** create shared libraries on Solaris systems. Therefore, libtool +-*** is disabling shared libraries support. We urge you to upgrade GNU +-*** binutils to release 2.9.1 or newer. Another option is to modify +-*** your PATH or compiler configuration so that the native linker is +-*** used, and then restart. ++ ifelse([$4], , [AC_MSG_ERROR(dnl ++[Package requirements ($2) were not met: + +-EOF +- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; ++$$1_PKG_ERRORS + +- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) +- case `$LD -v 2>&1` in +- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- cat <<_LT_EOF 1>&2 ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + +-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +-*** reliably create shared libraries on SCO systems. Therefore, libtool +-*** is disabling shared libraries support. We urge you to upgrade GNU +-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +-*** your PATH or compiler configuration so that the native linker is +-*** used, and then restart. ++_PKG_TEXT ++])], ++ [AC_MSG_RESULT([no]) ++ $4]) ++elif test $pkg_failed = untried; then ++ ifelse([$4], , [AC_MSG_FAILURE(dnl ++[The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. + +-_LT_EOF +- ;; +- *) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- esac +- ;; ++_PKG_TEXT + +- sunos4*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- wlarc= +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++To get pkg-config, see .])], ++ [$4]) ++else ++ $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS ++ $1[]_LIBS=$pkg_cv_[]$1[]_LIBS ++ AC_MSG_RESULT([yes]) ++ ifelse([$3], , :, [$3]) ++fi[]dnl ++])# PKG_CHECK_MODULES + +- *) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- esac ++# Copyright (C) 2002, 2003, 2005, 2006, 2007 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +- if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then +- runpath_var= +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +- fi +- else +- # PORTME fill in a description of your system's linker (not GNU ld) +- case $host_os in +- aix3*) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported +- _LT_AC_TAGVAR(always_export_symbols, $1)=yes +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' +- # Note: this linker hardcodes the directories in LIBPATH if there +- # are no directories specified by -L. +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then +- # Neither direct hardcoding nor static linking is supported with a +- # broken collect2. +- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported +- fi +- ;; ++# AM_AUTOMAKE_VERSION(VERSION) ++# ---------------------------- ++# Automake X.Y traces this macro to ensure aclocal.m4 has been ++# generated from the m4 files accompanying Automake X.Y. ++# (This private macro should not be called outside this file.) ++AC_DEFUN([AM_AUTOMAKE_VERSION], ++[am__api_version='1.10' ++dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to ++dnl require some minimum version. Point them to the right macro. ++m4_if([$1], [1.10.1], [], ++ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ++]) + +- aix[[4-9]]*) +- if test "$host_cpu" = ia64; then +- # On IA64, the linker does run time linking by default, so we don't +- # have to do anything special. +- aix_use_runtimelinking=no +- exp_sym_flag='-Bexport' +- no_entry_flag="" +- else +- # If we're using GNU nm, then we don't want the "-C" option. +- # -C means demangle to AIX nm, but means don't demangle with GNU nm +- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' +- else +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' +- fi +- aix_use_runtimelinking=no ++# _AM_AUTOCONF_VERSION(VERSION) ++# ----------------------------- ++# aclocal traces this macro to find the Autoconf version. ++# This is a private macro too. Using m4_define simplifies ++# the logic in aclocal, which can simply ignore this definition. ++m4_define([_AM_AUTOCONF_VERSION], []) + +- # Test if we are trying to use run time linking or normal +- # AIX style linking. If -brtl is somewhere in LDFLAGS, we +- # need to do runtime linking. +- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) +- for ld_flag in $LDFLAGS; do +- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then +- aix_use_runtimelinking=yes +- break +- fi +- done +- ;; +- esac ++# AM_SET_CURRENT_AUTOMAKE_VERSION ++# ------------------------------- ++# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. ++# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. ++AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], ++[AM_AUTOMAKE_VERSION([1.10.1])dnl ++m4_ifndef([AC_AUTOCONF_VERSION], ++ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl ++_AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)]) + +- exp_sym_flag='-bexport' +- no_entry_flag='-bnoentry' +- fi ++# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +- # When large executables or shared objects are built, AIX ld can +- # have problems creating the table of contents. If linking a library +- # or program results in "error TOC overflow" add -mminimal-toc to +- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not +- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. ++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +- _LT_AC_TAGVAR(archive_cmds, $1)='' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ++# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets ++# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to ++# `$srcdir', `$srcdir/..', or `$srcdir/../..'. ++# ++# Of course, Automake must honor this variable whenever it calls a ++# tool from the auxiliary directory. The problem is that $srcdir (and ++# therefore $ac_aux_dir as well) can be either absolute or relative, ++# depending on how configure is run. This is pretty annoying, since ++# it makes $ac_aux_dir quite unusable in subdirectories: in the top ++# source directory, any form will work fine, but in subdirectories a ++# relative path needs to be adjusted first. ++# ++# $ac_aux_dir/missing ++# fails when called from a subdirectory if $ac_aux_dir is relative ++# $top_srcdir/$ac_aux_dir/missing ++# fails if $ac_aux_dir is absolute, ++# fails when called from a subdirectory in a VPATH build with ++# a relative $ac_aux_dir ++# ++# The reason of the latter failure is that $top_srcdir and $ac_aux_dir ++# are both prefixed by $srcdir. In an in-source build this is usually ++# harmless because $srcdir is `.', but things will broke when you ++# start a VPATH build or use an absolute $srcdir. ++# ++# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, ++# iff we strip the leading $srcdir from $ac_aux_dir. That would be: ++# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` ++# and then we would define $MISSING as ++# MISSING="\${SHELL} $am_aux_dir/missing" ++# This will work as long as MISSING is not called from configure, because ++# unfortunately $(top_srcdir) has no meaning in configure. ++# However there are other variables, like CC, which are often used in ++# configure, and could therefore not use this "fixed" $ac_aux_dir. ++# ++# Another solution, used here, is to always expand $ac_aux_dir to an ++# absolute PATH. The drawback is that using absolute paths prevent a ++# configured tree to be moved without reconfiguration. ++ ++AC_DEFUN([AM_AUX_DIR_EXPAND], ++[dnl Rely on autoconf to set up CDPATH properly. ++AC_PREREQ([2.50])dnl ++# expand $ac_aux_dir to an absolute path ++am_aux_dir=`cd $ac_aux_dir && pwd` ++]) + +- if test "$GCC" = yes; then +- case $host_os in aix4.[[012]]|aix4.[[012]].*) +- # We only want to do this on AIX 4.2 and lower, the check +- # below for broken collect2 doesn't work under 4.3+ +- collect2name=`${CC} -print-prog-name=collect2` +- if test -f "$collect2name" && \ +- strings "$collect2name" | grep resolve_lib_name >/dev/null +- then +- # We have reworked collect2 +- : +- else +- # We have old collect2 +- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported +- # It fails to find uninstalled libraries when the uninstalled +- # path is not listed in the libpath. Setting hardcode_minus_L +- # to unsupported forces relinking +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= +- fi +- ;; +- esac +- shared_flag='-shared' +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag="$shared_flag "'${wl}-G' +- fi +- else +- # not using gcc +- if test "$host_cpu" = ia64; then +- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release +- # chokes on -Wl,-G. The following line is correct: +- shared_flag='-G' +- else +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag='${wl}-G' +- else +- shared_flag='${wl}-bM:SRE' +- fi +- fi +- fi ++# AM_CONDITIONAL -*- Autoconf -*- + +- # It seems that -bexpall does not export symbols beginning with +- # underscore (_), so it is better to generate a list of symbols to export. +- _LT_AC_TAGVAR(always_export_symbols, $1)=yes +- if test "$aix_use_runtimelinking" = yes; then +- # Warning - without using the other runtime loading flags (-brtl), +- # -berok will link without error, but may produce a broken library. +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' +- # Determine the default libpath from the value encoded in an empty executable. +- _LT_AC_SYS_LIBPATH_AIX +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" +- else +- if test "$host_cpu" = ia64; then +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" +- else +- # Determine the default libpath from the value encoded in an empty executable. +- _LT_AC_SYS_LIBPATH_AIX +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" +- # Warning - without using the other run time loading flags, +- # -berok will link without error, but may produce a broken library. +- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' +- # Exported symbols can be pulled into shared objects from archives +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes +- # This is similar to how AIX traditionally builds its shared libraries. +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' +- fi +- fi +- ;; ++# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +- amigaos*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- # see comment about different semantics on the GNU ld section +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; ++# serial 8 + +- bsdi[[45]]*) +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic +- ;; ++# AM_CONDITIONAL(NAME, SHELL-CONDITION) ++# ------------------------------------- ++# Define a conditional. ++AC_DEFUN([AM_CONDITIONAL], ++[AC_PREREQ(2.52)dnl ++ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], ++ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl ++AC_SUBST([$1_TRUE])dnl ++AC_SUBST([$1_FALSE])dnl ++_AM_SUBST_NOTMAKE([$1_TRUE])dnl ++_AM_SUBST_NOTMAKE([$1_FALSE])dnl ++if $2; then ++ $1_TRUE= ++ $1_FALSE='#' ++else ++ $1_TRUE='#' ++ $1_FALSE= ++fi ++AC_CONFIG_COMMANDS_PRE( ++[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then ++ AC_MSG_ERROR([[conditional "$1" was never defined. ++Usually this means the macro was only invoked conditionally.]]) ++fi])]) + +- cygwin* | mingw* | pw32*) +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- # hardcode_libdir_flag_spec is actually meaningless, as there is +- # no search path for DLLs. +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported +- # Tell ltmain to make .lib files, not .a files. +- libext=lib +- # Tell ltmain to make .dll files, not .so files. +- shrext_cmds=".dll" +- # FIXME: Setting linknames here is a bad hack. +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' +- # The linker will automatically build a .lib file if we build a DLL. +- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' +- # FIXME: Should let the user specify the lib program. +- _LT_AC_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' +- _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' +- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes +- ;; ++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +- darwin* | rhapsody*) +- case $host_os in +- rhapsody* | darwin1.[[012]]) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' +- ;; +- *) # Darwin 1.3 on +- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' +- else +- case ${MACOSX_DEPLOYMENT_TARGET} in +- 10.[[012]]) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' +- ;; +- 10.*) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' +- ;; +- esac +- fi +- ;; +- esac +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes +- if test "$GCC" = yes ; then +- output_verbose_link_cmd='echo' +- _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" +- _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" +- _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" +- else +- case $cc_basename in +- xlc*) +- output_verbose_link_cmd='echo' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' +- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- ;; +- *) +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- esac +- fi +- ;; ++# serial 9 + +- dgux*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be ++# written in clear, in which case automake, when reading aclocal.m4, ++# will think it sees a *use*, and therefore will trigger all it's ++# C support machinery. Also note that it means that autoscan, seeing ++# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + +- freebsd1*) +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; + +- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor +- # support. Future versions do this automatically, but an explicit c++rt0.o +- # does not break anything, and helps significantly (at the cost of a little +- # extra space). +- freebsd2.2*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++# _AM_DEPENDENCIES(NAME) ++# ---------------------- ++# See how the compiler implements dependency checking. ++# NAME is "CC", "CXX", "GCJ", or "OBJC". ++# We try a few techniques and use that to set a single cache variable. ++# ++# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was ++# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular ++# dependency, and given that the user is not expected to run this macro, ++# just rely on AC_PROG_CC. ++AC_DEFUN([_AM_DEPENDENCIES], ++[AC_REQUIRE([AM_SET_DEPDIR])dnl ++AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl ++AC_REQUIRE([AM_MAKE_INCLUDE])dnl ++AC_REQUIRE([AM_DEP_TRACK])dnl + +- # Unfortunately, older versions of FreeBSD 2 do not have this feature. +- freebsd2*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++ifelse([$1], CC, [depcc="$CC" am_compiler_list=], ++ [$1], CXX, [depcc="$CXX" am_compiler_list=], ++ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], ++ [$1], UPC, [depcc="$UPC" am_compiler_list=], ++ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], ++ [depcc="$$1" am_compiler_list=]) ++ ++AC_CACHE_CHECK([dependency style of $depcc], ++ [am_cv_$1_dependencies_compiler_type], ++[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then ++ # We make a subdir and do the tests there. Otherwise we can end up ++ # making bogus files that we don't know about and never remove. For ++ # instance it was reported that on HP-UX the gcc test will end up ++ # making a dummy file named `D' -- because `-MD' means `put the output ++ # in D'. ++ mkdir conftest.dir ++ # Copy depcomp to subdir because otherwise we won't find it if we're ++ # using a relative directory. ++ cp "$am_depcomp" conftest.dir ++ cd conftest.dir ++ # We will build objects and dependencies in a subdirectory because ++ # it helps to detect inapplicable dependency modes. For instance ++ # both Tru64's cc and ICC support -MD to output dependencies as a ++ # side effect of compilation, but ICC will put the dependencies in ++ # the current directory while Tru64 will put them in the object ++ # directory. ++ mkdir sub + +- # FreeBSD 3 and greater uses gcc -shared to do shared libraries. +- freebsd* | dragonfly*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++ am_cv_$1_dependencies_compiler_type=none ++ if test "$am_compiler_list" = ""; then ++ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` ++ fi ++ for depmode in $am_compiler_list; do ++ # Setup a source with many dependencies, because some compilers ++ # like to wrap large dependency lists on column 80 (with \), and ++ # we should not choose a depcomp mode which is confused by this. ++ # ++ # We need to recreate these files for each test, as the compiler may ++ # overwrite some of them when testing with obscure command lines. ++ # This happens at least with the AIX C compiler. ++ : > sub/conftest.c ++ for i in 1 2 3 4 5 6; do ++ echo '#include "conftst'$i'.h"' >> sub/conftest.c ++ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with ++ # Solaris 8's {/usr,}/bin/sh. ++ touch sub/conftst$i.h ++ done ++ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + +- hpux9*) +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ case $depmode in ++ nosideeffect) ++ # after this tag, mechanisms are not by side-effect, so they'll ++ # only be used when explicitly requested ++ if test "x$enable_dependency_tracking" = xyes; then ++ continue + else +- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ break + fi +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; +- +- hpux10*) +- if test "$GCC" = yes -a "$with_gnu_ld" = no; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ none) break ;; ++ esac ++ # We check with `-c' and `-o' for the sake of the "dashmstdout" ++ # mode. It turns out that the SunPro C++ compiler does not properly ++ # handle `-M -o', and we need to detect this. ++ if depmode=$depmode \ ++ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ ++ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ ++ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ ++ >/dev/null 2>conftest.err && ++ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && ++ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && ++ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then ++ # icc doesn't choke on unknown options, it will just issue warnings ++ # or remarks (even with -Werror). So we grep stderr for any message ++ # that says an option was ignored or not supported. ++ # When given -MP, icc 7.0 and 7.1 complain thusly: ++ # icc: Command line warning: ignoring option '-M'; no argument required ++ # The diagnosis changed in icc 8.0: ++ # icc: Command line remark: option '-MP' not supported ++ if (grep 'ignoring option' conftest.err || ++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else ++ am_cv_$1_dependencies_compiler_type=$depmode ++ break + fi +- if test "$with_gnu_ld" = no; then +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++ fi ++ done + +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ cd .. ++ rm -rf conftest.dir ++else ++ am_cv_$1_dependencies_compiler_type=none ++fi ++]) ++AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) ++AM_CONDITIONAL([am__fastdep$1], [ ++ test "x$enable_dependency_tracking" != xno \ ++ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ++]) + +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- fi +- ;; + +- hpux11*) +- if test "$GCC" = yes -a "$with_gnu_ld" = no; then +- case $host_cpu in +- hppa*64*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- ia64*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- esac +- else +- case $host_cpu in +- hppa*64*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- ia64*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- esac +- fi +- if test "$with_gnu_ld" = no; then +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++# AM_SET_DEPDIR ++# ------------- ++# Choose a directory name for dependency files. ++# This macro is AC_REQUIREd in _AM_DEPENDENCIES ++AC_DEFUN([AM_SET_DEPDIR], ++[AC_REQUIRE([AM_SET_LEADING_DOT])dnl ++AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ++]) + +- case $host_cpu in +- hppa*64*|ia64*) +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; +- *) +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- ;; +- esac +- fi +- ;; ++# AM_DEP_TRACK ++# ------------ ++AC_DEFUN([AM_DEP_TRACK], ++[AC_ARG_ENABLE(dependency-tracking, ++[ --disable-dependency-tracking speeds up one-time build ++ --enable-dependency-tracking do not reject slow dependency extractors]) ++if test "x$enable_dependency_tracking" != xno; then ++ am_depcomp="$ac_aux_dir/depcomp" ++ AMDEPBACKSLASH='\' ++fi ++AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) ++AC_SUBST([AMDEPBACKSLASH])dnl ++_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl ++]) + +- irix5* | irix6* | nonstopux*) +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' +- fi +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes +- ;; ++# Generate code to set up dependency tracking. -*- Autoconf -*- + +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF +- fi +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++#serial 3 ++ ++# _AM_OUTPUT_DEPENDENCY_COMMANDS ++# ------------------------------ ++AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], ++[for mf in $CONFIG_FILES; do ++ # Strip MF so we end up with the name of the file. ++ mf=`echo "$mf" | sed -e 's/:.*$//'` ++ # Check whether this is an Automake generated Makefile or not. ++ # We used to match only the files named `Makefile.in', but ++ # some people rename them; so instead we look at the file content. ++ # Grep'ing the first line is not enough: some people post-process ++ # each Makefile.in and add a new line on top of each file to say so. ++ # Grep'ing the whole file is not good either: AIX grep has a line ++ # limit of 2048, but all sed's we know have understand at least 4000. ++ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then ++ dirpart=`AS_DIRNAME("$mf")` ++ else ++ continue ++ fi ++ # Extract the definition of DEPDIR, am__include, and am__quote ++ # from the Makefile without running `make'. ++ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` ++ test -z "$DEPDIR" && continue ++ am__include=`sed -n 's/^am__include = //p' < "$mf"` ++ test -z "am__include" && continue ++ am__quote=`sed -n 's/^am__quote = //p' < "$mf"` ++ # When using ansi2knr, U may be empty or an underscore; expand it ++ U=`sed -n 's/^U = //p' < "$mf"` ++ # Find all dependency output files, they are included files with ++ # $(DEPDIR) in their names. We invoke sed twice because it is the ++ # simplest approach to changing $(DEPDIR) to its actual value in the ++ # expansion. ++ for file in `sed -n " ++ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ ++ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do ++ # Make sure the directory exists. ++ test -f "$dirpart/$file" && continue ++ fdir=`AS_DIRNAME(["$file"])` ++ AS_MKDIR_P([$dirpart/$fdir]) ++ # echo "creating $dirpart/$file" ++ echo '# dummy' > "$dirpart/$file" ++ done ++done ++])# _AM_OUTPUT_DEPENDENCY_COMMANDS ++ ++ ++# AM_OUTPUT_DEPENDENCY_COMMANDS ++# ----------------------------- ++# This macro should only be invoked once -- use via AC_REQUIRE. ++# ++# This code is only required when automatic dependency tracking ++# is enabled. FIXME. This creates each `.P' file that we will ++# need in order to bootstrap the dependency handling code. ++AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], ++[AC_CONFIG_COMMANDS([depfiles], ++ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], ++ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ++]) + +- newsos6) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++# Do all the work for Automake. -*- Autoconf -*- + +- openbsd*) +- if test -f /usr/libexec/ld.so; then +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' +- else +- case $host_os in +- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- ;; +- *) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- ;; +- esac +- fi +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, ++# 2005, 2006, 2008 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +- os2*) +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported +- _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' +- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' +- ;; ++# serial 13 + +- osf3*) +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- fi +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- ;; ++# This macro actually does too much. Some checks are only needed if ++# your package does certain things. But this isn't really a big deal. + +- osf4* | osf5*) # as osf3* with the addition of -msym flag +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- else +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ +- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' ++# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) ++# AM_INIT_AUTOMAKE([OPTIONS]) ++# ----------------------------------------------- ++# The call with PACKAGE and VERSION arguments is the old style ++# call (pre autoconf-2.50), which is being phased out. PACKAGE ++# and VERSION should now be passed to AC_INIT and removed from ++# the call to AM_INIT_AUTOMAKE. ++# We support both call styles for the transition. After ++# the next Automake release, Autoconf can make the AC_INIT ++# arguments mandatory, and then we can depend on a new Autoconf ++# release and drop the old call support. ++AC_DEFUN([AM_INIT_AUTOMAKE], ++[AC_PREREQ([2.60])dnl ++dnl Autoconf wants to disallow AM_ names. We explicitly allow ++dnl the ones we care about. ++m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl ++AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl ++AC_REQUIRE([AC_PROG_INSTALL])dnl ++if test "`cd $srcdir && pwd`" != "`pwd`"; then ++ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output ++ # is not polluted with repeated "-I." ++ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl ++ # test to see if srcdir already configured ++ if test -f $srcdir/config.status; then ++ AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) ++ fi ++fi + +- # Both c and cxx compiler support -rpath directly +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' +- fi +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- ;; ++# test whether we have cygpath ++if test -z "$CYGPATH_W"; then ++ if (cygpath --version) >/dev/null 2>/dev/null; then ++ CYGPATH_W='cygpath -w' ++ else ++ CYGPATH_W=echo ++ fi ++fi ++AC_SUBST([CYGPATH_W]) + +- solaris*) +- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' +- if test "$GCC" = yes; then +- wlarc='${wl}' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' +- else +- wlarc='' +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +- fi +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- case $host_os in +- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; +- *) +- # The compiler driver will combine and reorder linker options, +- # but understands `-z linker_flag'. GCC discards it without `$wl', +- # but is careful enough not to reorder. +- # Supported since Solaris 2.6 (maybe 2.5.1?) +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' +- else +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' +- fi +- ;; +- esac +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes +- ;; ++# Define the identity of the package. ++dnl Distinguish between old-style and new-style calls. ++m4_ifval([$2], ++[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl ++ AC_SUBST([PACKAGE], [$1])dnl ++ AC_SUBST([VERSION], [$2])], ++[_AM_SET_OPTIONS([$1])dnl ++dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. ++m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, ++ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl ++ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl ++ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +- sunos4*) +- if test "x$host_vendor" = xsequent; then +- # Use $CC to link under sequent, because it throws in some extra .o +- # files that make .init and .fini sections work. +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' +- fi +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++_AM_IF_OPTION([no-define],, ++[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) ++ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl + +- sysv4) +- case $host_vendor in +- sni) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? +- ;; +- siemens) +- ## LD is ld it makes a PLAMLIB +- ## CC just makes a GrossModule. +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- ;; +- motorola) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie +- ;; +- esac +- runpath_var='LD_RUN_PATH' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++# Some tools Automake needs. ++AC_REQUIRE([AM_SANITY_CHECK])dnl ++AC_REQUIRE([AC_ARG_PROGRAM])dnl ++AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) ++AM_MISSING_PROG(AUTOCONF, autoconf) ++AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) ++AM_MISSING_PROG(AUTOHEADER, autoheader) ++AM_MISSING_PROG(MAKEINFO, makeinfo) ++AM_PROG_INSTALL_SH ++AM_PROG_INSTALL_STRIP ++AC_REQUIRE([AM_PROG_MKDIR_P])dnl ++# We need awk for the "check" target. The system "awk" is bad on ++# some platforms. ++AC_REQUIRE([AC_PROG_AWK])dnl ++AC_REQUIRE([AC_PROG_MAKE_SET])dnl ++AC_REQUIRE([AM_SET_LEADING_DOT])dnl ++_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], ++ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], ++ [_AM_PROG_TAR([v7])])]) ++_AM_IF_OPTION([no-dependencies],, ++[AC_PROVIDE_IFELSE([AC_PROG_CC], ++ [_AM_DEPENDENCIES(CC)], ++ [define([AC_PROG_CC], ++ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl ++AC_PROVIDE_IFELSE([AC_PROG_CXX], ++ [_AM_DEPENDENCIES(CXX)], ++ [define([AC_PROG_CXX], ++ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl ++AC_PROVIDE_IFELSE([AC_PROG_OBJC], ++ [_AM_DEPENDENCIES(OBJC)], ++ [define([AC_PROG_OBJC], ++ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl ++]) ++]) + +- sysv4.3*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' +- ;; + +- sysv4*MP*) +- if test -d /usr/nec; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- runpath_var=LD_RUN_PATH +- hardcode_runpath_var=yes +- _LT_AC_TAGVAR(ld_shlibs, $1)=yes +- fi +- ;; ++# When config.status generates a header, we must update the stamp-h file. ++# This file resides in the same directory as the config header ++# that is generated. The stamp files are numbered to have different names. ++ ++# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the ++# loop where config.status creates the headers, so we can generate ++# our stamp files there. ++AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], ++[# Compute $1's index in $config_headers. ++_am_arg=$1 ++_am_stamp_count=1 ++for _am_header in $config_headers :; do ++ case $_am_header in ++ $_am_arg | $_am_arg:* ) ++ break ;; ++ * ) ++ _am_stamp_count=`expr $_am_stamp_count + 1` ;; ++ esac ++done ++echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) + +- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) +- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- runpath_var='LD_RUN_PATH' ++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- fi +- ;; ++# AM_PROG_INSTALL_SH ++# ------------------ ++# Define $install_sh. ++AC_DEFUN([AM_PROG_INSTALL_SH], ++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ++install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} ++AC_SUBST(install_sh)]) + +- sysv5* | sco3.2v5* | sco5v6*) +- # Note: We can NOT use -z defs as we might desire, because we do not +- # link with -lc, and that would cause any symbols used from libc to +- # always be unresolved, which means just about no library would +- # ever link correctly. If we're not using GNU ld we use -z text +- # though, which does catch some bad symbols but isn't as heavy-handed +- # as -z defs. +- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' +- runpath_var='LD_RUN_PATH' ++# Copyright (C) 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- fi +- ;; ++# serial 2 + +- uts4*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++# Check whether the underlying file-system supports filenames ++# with a leading dot. For instance MS-DOS doesn't. ++AC_DEFUN([AM_SET_LEADING_DOT], ++[rm -rf .tst 2>/dev/null ++mkdir .tst 2>/dev/null ++if test -d .tst; then ++ am__leading_dot=. ++else ++ am__leading_dot=_ ++fi ++rmdir .tst 2>/dev/null ++AC_SUBST([am__leading_dot])]) + +- *) +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- esac +- fi +-]) +-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) +-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no ++# Add --enable-maintainer-mode option to configure. -*- Autoconf -*- ++# From Jim Meyering + ++# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005 ++# Free Software Foundation, Inc. + # +-# Do we need to explicitly link libc? +-# +-case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in +-x|xyes) +- # Assume -lc should be added +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +- if test "$enable_shared" = yes && test "$GCC" = yes; then +- case $_LT_AC_TAGVAR(archive_cmds, $1) in +- *'~'*) +- # FIXME: we may have to deal with multi-command sequences. +- ;; +- '$CC '*) +- # Test whether the compiler implicitly links with -lc since on some +- # systems, -lgcc has to come before -lc. If gcc already passes -lc +- # to ld, don't add -lc before -lgcc. +- AC_MSG_CHECKING([whether -lc should be explicitly linked in]) +- $rm conftest* +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++# serial 4 + +- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then +- soname=conftest +- lib=conftest +- libobjs=conftest.$ac_objext +- deplibs= +- wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) +- pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) +- compiler_flags=-v +- linker_flags=-v +- verstring= +- output_objdir=. +- libname=conftest +- lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)= +- if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) +- then +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- else +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes +- fi +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag +- else +- cat conftest.err 1>&5 +- fi +- $rm conftest* +- AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) +- ;; +- esac +- fi +- ;; +-esac +-])# AC_LIBTOOL_PROG_LD_SHLIBS ++AC_DEFUN([AM_MAINTAINER_MODE], ++[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) ++ dnl maintainer-mode is disabled by default ++ AC_ARG_ENABLE(maintainer-mode, ++[ --enable-maintainer-mode enable make rules and dependencies not useful ++ (and sometimes confusing) to the casual installer], ++ USE_MAINTAINER_MODE=$enableval, ++ USE_MAINTAINER_MODE=no) ++ AC_MSG_RESULT([$USE_MAINTAINER_MODE]) ++ AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes]) ++ MAINT=$MAINTAINER_MODE_TRUE ++ AC_SUBST(MAINT)dnl ++] ++) + ++AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE]) + +-# _LT_AC_FILE_LTDLL_C +-# ------------------- +-# Be careful that the start marker always follows a newline. +-AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ +-# /* ltdll.c starts here */ +-# #define WIN32_LEAN_AND_MEAN +-# #include +-# #undef WIN32_LEAN_AND_MEAN +-# #include +-# +-# #ifndef __CYGWIN__ +-# # ifdef __CYGWIN32__ +-# # define __CYGWIN__ __CYGWIN32__ +-# # endif +-# #endif +-# +-# #ifdef __cplusplus +-# extern "C" { +-# #endif +-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); +-# #ifdef __cplusplus +-# } +-# #endif ++# Check to see how 'make' treats includes. -*- Autoconf -*- ++ ++# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. + # +-# #ifdef __CYGWIN__ +-# #include +-# DECLARE_CYGWIN_DLL( DllMain ); +-# #endif +-# HINSTANCE __hDllInstance_base; ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 3 ++ ++# AM_MAKE_INCLUDE() ++# ----------------- ++# Check to see how make treats includes. ++AC_DEFUN([AM_MAKE_INCLUDE], ++[am_make=${MAKE-make} ++cat > confinc << 'END' ++am__doit: ++ @echo done ++.PHONY: am__doit ++END ++# If we don't find an include directive, just comment out the code. ++AC_MSG_CHECKING([for style of include used by $am_make]) ++am__include="#" ++am__quote= ++_am_result=none ++# First try GNU make style include. ++echo "include confinc" > confmf ++# We grep out `Entering directory' and `Leaving directory' ++# messages which can occur if `w' ends up in MAKEFLAGS. ++# In particular we don't look at `^make:' because GNU make might ++# be invoked under some other name (usually "gmake"), in which ++# case it prints its new name instead of `make'. ++if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then ++ am__include=include ++ am__quote= ++ _am_result=GNU ++fi ++# Now try BSD make style include. ++if test "$am__include" = "#"; then ++ echo '.include "confinc"' > confmf ++ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then ++ am__include=.include ++ am__quote="\"" ++ _am_result=BSD ++ fi ++fi ++AC_SUBST([am__include]) ++AC_SUBST([am__quote]) ++AC_MSG_RESULT([$_am_result]) ++rm -f confinc confmf ++]) ++ ++# Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005 ++# Free Software Foundation, Inc. + # +-# BOOL APIENTRY +-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) +-# { +-# __hDllInstance_base = hInst; +-# return TRUE; +-# } +-# /* ltdll.c ends here */ +-])# _LT_AC_FILE_LTDLL_C ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 5 ++ ++# AM_PROG_CC_C_O ++# -------------- ++# Like AC_PROG_CC_C_O, but changed for automake. ++AC_DEFUN([AM_PROG_CC_C_O], ++[AC_REQUIRE([AC_PROG_CC_C_O])dnl ++AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ++AC_REQUIRE_AUX_FILE([compile])dnl ++# FIXME: we rely on the cache variable name because ++# there is no other way. ++set dummy $CC ++ac_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']` ++if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" != yes"; then ++ # Losing compiler, so override with the script. ++ # FIXME: It is wrong to rewrite CC. ++ # But if we don't then we get into trouble of one sort or another. ++ # A longer-term fix would be to have automake use am__CC in this case, ++ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" ++ CC="$am_aux_dir/compile $CC" ++fi ++dnl Make sure AC_PROG_CC is never called again, or it will override our ++dnl setting of CC. ++m4_define([AC_PROG_CC], ++ [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])]) ++]) + ++# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +-# _LT_AC_TAGVAR(VARNAME, [TAGNAME]) +-# --------------------------------- +-AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])]) ++# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + ++# serial 5 + +-# old names +-AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) +-AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +-AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) +-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) +-AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) +-AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) ++# AM_MISSING_PROG(NAME, PROGRAM) ++# ------------------------------ ++AC_DEFUN([AM_MISSING_PROG], ++[AC_REQUIRE([AM_MISSING_HAS_RUN]) ++$1=${$1-"${am_missing_run}$2"} ++AC_SUBST($1)]) + +-# This is just to silence aclocal about the macro not being used +-ifelse([AC_DISABLE_FAST_INSTALL]) + +-AC_DEFUN([LT_AC_PROG_GCJ], +-[AC_CHECK_TOOL(GCJ, gcj, no) +- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" +- AC_SUBST(GCJFLAGS) ++# AM_MISSING_HAS_RUN ++# ------------------ ++# Define MISSING if not defined so far and test if it supports --run. ++# If it does, set am_missing_run to use it, otherwise, to nothing. ++AC_DEFUN([AM_MISSING_HAS_RUN], ++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ++AC_REQUIRE_AUX_FILE([missing])dnl ++test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" ++# Use eval to expand $SHELL ++if eval "$MISSING --run true"; then ++ am_missing_run="$MISSING --run " ++else ++ am_missing_run= ++ AC_MSG_WARN([`missing' script is too old or missing]) ++fi + ]) + +-AC_DEFUN([LT_AC_PROG_RC], +-[AC_CHECK_TOOL(RC, windres, no) ++# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# AM_PROG_MKDIR_P ++# --------------- ++# Check for `mkdir -p'. ++AC_DEFUN([AM_PROG_MKDIR_P], ++[AC_PREREQ([2.60])dnl ++AC_REQUIRE([AC_PROG_MKDIR_P])dnl ++dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, ++dnl while keeping a definition of mkdir_p for backward compatibility. ++dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. ++dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of ++dnl Makefile.ins that do not define MKDIR_P, so we do our own ++dnl adjustment using top_builddir (which is defined more often than ++dnl MKDIR_P). ++AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl ++case $mkdir_p in ++ [[\\/$]]* | ?:[[\\/]]*) ;; ++ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; ++esac + ]) + ++# Helper functions for option handling. -*- Autoconf -*- + +-# Cheap backport of AS_EXECUTABLE_P and required macros +-# from Autoconf 2.59; we should not use $as_executable_p directly. ++# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-# _AS_TEST_PREPARE +-# ---------------- +-m4_ifndef([_AS_TEST_PREPARE], +-[m4_defun([_AS_TEST_PREPARE], +-[if test -x / >/dev/null 2>&1; then +- as_executable_p='test -x' +-else +- as_executable_p='test -f' +-fi +-])])# _AS_TEST_PREPARE ++# serial 3 + +-# AS_EXECUTABLE_P +-# --------------- +-# Check whether a file is executable. +-m4_ifndef([AS_EXECUTABLE_P], +-[m4_defun([AS_EXECUTABLE_P], +-[AS_REQUIRE([_AS_TEST_PREPARE])dnl +-$as_executable_p $1[]dnl +-])])# AS_EXECUTABLE_P ++# _AM_MANGLE_OPTION(NAME) ++# ----------------------- ++AC_DEFUN([_AM_MANGLE_OPTION], ++[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +-# NOTE: This macro has been submitted for inclusion into # +-# GNU Autoconf as AC_PROG_SED. When it is available in # +-# a released version of Autoconf we should remove this # +-# macro and use it instead. # +-# LT_AC_PROG_SED +-# -------------- +-# Check for a fully-functional sed program, that truncates +-# as few characters as possible. Prefer GNU sed if found. +-AC_DEFUN([LT_AC_PROG_SED], +-[AC_MSG_CHECKING([for a sed that does not truncate output]) +-AC_CACHE_VAL(lt_cv_path_SED, +-[# Loop through the user's path and test for sed and gsed. +-# Then use that list of sed's as ones to test for truncation. +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for lt_ac_prog in sed gsed; do +- for ac_exec_ext in '' $ac_executable_extensions; do +- if AS_EXECUTABLE_P(["$as_dir/$lt_ac_prog$ac_exec_ext"]); then +- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" +- fi +- done +- done +-done +-IFS=$as_save_IFS +-lt_ac_max=0 +-lt_ac_count=0 +-# Add /usr/xpg4/bin/sed as it is typically found on Solaris +-# along with /bin/sed that truncates output. +-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do +- test ! -f $lt_ac_sed && continue +- cat /dev/null > conftest.in +- lt_ac_count=0 +- echo $ECHO_N "0123456789$ECHO_C" >conftest.in +- # Check for GNU sed and select it if it is found. +- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then +- lt_cv_path_SED=$lt_ac_sed +- break +- fi +- while true; do +- cat conftest.in conftest.in >conftest.tmp +- mv conftest.tmp conftest.in +- cp conftest.in conftest.nl +- echo >>conftest.nl +- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break +- cmp -s conftest.out conftest.nl || break +- # 10000 chars as input seems more than enough +- test $lt_ac_count -gt 10 && break +- lt_ac_count=`expr $lt_ac_count + 1` +- if test $lt_ac_count -gt $lt_ac_max; then +- lt_ac_max=$lt_ac_count +- lt_cv_path_SED=$lt_ac_sed +- fi +- done +-done +-]) +-SED=$lt_cv_path_SED +-AC_SUBST([SED]) +-AC_MSG_RESULT([$SED]) +-]) ++# _AM_SET_OPTION(NAME) ++# ------------------------------ ++# Set option NAME. Presently that only means defining a flag for this option. ++AC_DEFUN([_AM_SET_OPTION], ++[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) + +-# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- +-# +-# Copyright © 2004 Scott James Remnant . +-# +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2 of the License, or +-# (at your option) any later version. +-# +-# This program is distributed in the hope that it will be useful, but +-# WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +-# General Public License for more details. +-# +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++# _AM_SET_OPTIONS(OPTIONS) ++# ---------------------------------- ++# OPTIONS is a space-separated list of Automake options. ++AC_DEFUN([_AM_SET_OPTIONS], ++[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) ++ ++# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) ++# ------------------------------------------- ++# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. ++AC_DEFUN([_AM_IF_OPTION], ++[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) ++ ++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. + # +-# As a special exception to the GNU General Public License, if you +-# distribute this file as part of a program that contains a +-# configuration script generated by Autoconf, you may include it under +-# the same distribution terms that you use for the rest of that program. ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-# PKG_PROG_PKG_CONFIG([MIN-VERSION]) +-# ---------------------------------- +-AC_DEFUN([PKG_PROG_PKG_CONFIG], +-[m4_pattern_forbid([^_?PKG_[A-Z_]+$]) +-m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) +-AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl +-if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then +- AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) +-fi +-if test -n "$PKG_CONFIG"; then +- _pkg_min_version=m4_default([$1], [0.9.0]) +- AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) +- if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then +- AC_MSG_RESULT([yes]) +- else +- AC_MSG_RESULT([no]) +- PKG_CONFIG="" +- fi +- +-fi[]dnl +-])# PKG_PROG_PKG_CONFIG ++# AM_RUN_LOG(COMMAND) ++# ------------------- ++# Run COMMAND, save the exit status in ac_status, and log it. ++# (This has been adapted from Autoconf's _AC_RUN_LOG macro.) ++AC_DEFUN([AM_RUN_LOG], ++[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD ++ ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD ++ (exit $ac_status); }]) + +-# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) +-# +-# Check to see whether a particular set of modules exists. Similar +-# to PKG_CHECK_MODULES(), but does not set variables or print errors. +-# ++# Check to make sure that the build environment is sane. -*- Autoconf -*- ++ ++# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 ++# Free Software Foundation, Inc. + # +-# Similar to PKG_CHECK_MODULES, make sure that the first instance of +-# this or PKG_CHECK_MODULES is called, or make sure to call +-# PKG_CHECK_EXISTS manually +-# -------------------------------------------------------------- +-AC_DEFUN([PKG_CHECK_EXISTS], +-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +-if test -n "$PKG_CONFIG" && \ +- AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then +- m4_ifval([$2], [$2], [:]) +-m4_ifvaln([$3], [else +- $3])dnl +-fi]) ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + ++# serial 4 + +-# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) +-# --------------------------------------------- +-m4_define([_PKG_CONFIG], +-[if test -n "$$1"; then +- pkg_cv_[]$1="$$1" +- elif test -n "$PKG_CONFIG"; then +- PKG_CHECK_EXISTS([$3], +- [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], +- [pkg_failed=yes]) +- else +- pkg_failed=untried +-fi[]dnl +-])# _PKG_CONFIG ++# AM_SANITY_CHECK ++# --------------- ++AC_DEFUN([AM_SANITY_CHECK], ++[AC_MSG_CHECKING([whether build environment is sane]) ++# Just in case ++sleep 1 ++echo timestamp > conftest.file ++# Do `set' in a subshell so we don't clobber the current shell's ++# arguments. Must try -L first in case configure is actually a ++# symlink; some systems play weird games with the mod time of symlinks ++# (eg FreeBSD returns the mod time of the symlink's containing ++# directory). ++if ( ++ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` ++ if test "$[*]" = "X"; then ++ # -L didn't work. ++ set X `ls -t $srcdir/configure conftest.file` ++ fi ++ rm -f conftest.file ++ if test "$[*]" != "X $srcdir/configure conftest.file" \ ++ && test "$[*]" != "X conftest.file $srcdir/configure"; then + +-# _PKG_SHORT_ERRORS_SUPPORTED +-# ----------------------------- +-AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], +-[AC_REQUIRE([PKG_PROG_PKG_CONFIG]) +-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then +- _pkg_short_errors_supported=yes +-else +- _pkg_short_errors_supported=no +-fi[]dnl +-])# _PKG_SHORT_ERRORS_SUPPORTED ++ # If neither matched, then we have a broken ls. This can happen ++ # if, for instance, CONFIG_SHELL is bash and it inherits a ++ # broken ls alias from the environment. This has actually ++ # happened. Such a system could not be considered "sane". ++ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken ++alias in your environment]) ++ fi + ++ test "$[2]" = conftest.file ++ ) ++then ++ # Ok. ++ : ++else ++ AC_MSG_ERROR([newly created file is older than distributed files! ++Check your system clock]) ++fi ++AC_MSG_RESULT(yes)]) + +-# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], +-# [ACTION-IF-NOT-FOUND]) +-# +-# +-# Note that if there is a possibility the first call to +-# PKG_CHECK_MODULES might not happen, you should be sure to include an +-# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac +-# ++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. + # +-# -------------------------------------------------------------- +-AC_DEFUN([PKG_CHECK_MODULES], +-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +-AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl +-AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-pkg_failed=no +-AC_MSG_CHECKING([for $1]) ++# AM_PROG_INSTALL_STRIP ++# --------------------- ++# One issue with vendor `install' (even GNU) is that you can't ++# specify the program used to strip binaries. This is especially ++# annoying in cross-compiling environments, where the build's strip ++# is unlikely to handle the host's binaries. ++# Fortunately install-sh will honor a STRIPPROG variable, so we ++# always use install-sh in `make install-strip', and initialize ++# STRIPPROG with the value of the STRIP variable (set by the user). ++AC_DEFUN([AM_PROG_INSTALL_STRIP], ++[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl ++# Installed binaries are usually stripped using `strip' when the user ++# run `make install-strip'. However `strip' might not be the right ++# tool to use in cross-compilation environments, therefore Automake ++# will honor the `STRIP' environment variable to overrule this program. ++dnl Don't test for $cross_compiling = yes, because it might be `maybe'. ++if test "$cross_compiling" != no; then ++ AC_CHECK_TOOL([STRIP], [strip], :) ++fi ++INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" ++AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +-_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) +-_PKG_CONFIG([$1][_LIBS], [libs], [$2]) ++# Copyright (C) 2006 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS +-and $1[]_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details.]) ++# _AM_SUBST_NOTMAKE(VARIABLE) ++# --------------------------- ++# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. ++# This macro is traced by Automake. ++AC_DEFUN([_AM_SUBST_NOTMAKE]) + +-if test $pkg_failed = yes; then +- _PKG_SHORT_ERRORS_SUPPORTED +- if test $_pkg_short_errors_supported = yes; then +- $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1` +- else +- $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1` +- fi +- # Put the nasty error message in config.log where it belongs +- echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD ++# Check how to create a tarball. -*- Autoconf -*- + +- ifelse([$4], , [AC_MSG_ERROR(dnl +-[Package requirements ($2) were not met: ++# Copyright (C) 2004, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-$$1_PKG_ERRORS ++# serial 2 + +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. ++# _AM_PROG_TAR(FORMAT) ++# -------------------- ++# Check how to create a tarball in format FORMAT. ++# FORMAT should be one of `v7', `ustar', or `pax'. ++# ++# Substitute a variable $(am__tar) that is a command ++# writing to stdout a FORMAT-tarball containing the directory ++# $tardir. ++# tardir=directory && $(am__tar) > result.tar ++# ++# Substitute a variable $(am__untar) that extract such ++# a tarball read from stdin. ++# $(am__untar) < result.tar ++AC_DEFUN([_AM_PROG_TAR], ++[# Always define AMTAR for backward compatibility. ++AM_MISSING_PROG([AMTAR], [tar]) ++m4_if([$1], [v7], ++ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], ++ [m4_case([$1], [ustar],, [pax],, ++ [m4_fatal([Unknown tar format])]) ++AC_MSG_CHECKING([how to create a $1 tar archive]) ++# Loop over all known methods to create a tar archive until one works. ++_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' ++_am_tools=${am_cv_prog_tar_$1-$_am_tools} ++# Do not fold the above two line into one, because Tru64 sh and ++# Solaris sh will not grok spaces in the rhs of `-'. ++for _am_tool in $_am_tools ++do ++ case $_am_tool in ++ gnutar) ++ for _am_tar in tar gnutar gtar; ++ do ++ AM_RUN_LOG([$_am_tar --version]) && break ++ done ++ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' ++ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' ++ am__untar="$_am_tar -xf -" ++ ;; ++ plaintar) ++ # Must skip GNU tar: if it does not support --format= it doesn't create ++ # ustar tarball either. ++ (tar --version) >/dev/null 2>&1 && continue ++ am__tar='tar chf - "$$tardir"' ++ am__tar_='tar chf - "$tardir"' ++ am__untar='tar xf -' ++ ;; ++ pax) ++ am__tar='pax -L -x $1 -w "$$tardir"' ++ am__tar_='pax -L -x $1 -w "$tardir"' ++ am__untar='pax -r' ++ ;; ++ cpio) ++ am__tar='find "$$tardir" -print | cpio -o -H $1 -L' ++ am__tar_='find "$tardir" -print | cpio -o -H $1 -L' ++ am__untar='cpio -i -H $1 -d' ++ ;; ++ none) ++ am__tar=false ++ am__tar_=false ++ am__untar=false ++ ;; ++ esac + +-_PKG_TEXT +-])], +- [AC_MSG_RESULT([no]) +- $4]) +-elif test $pkg_failed = untried; then +- ifelse([$4], , [AC_MSG_FAILURE(dnl +-[The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. ++ # If the value was cached, stop now. We just wanted to have am__tar ++ # and am__untar set. ++ test -n "${am_cv_prog_tar_$1}" && break + +-_PKG_TEXT ++ # tar/untar a dummy directory, and stop if the command works ++ rm -rf conftest.dir ++ mkdir conftest.dir ++ echo GrepMe > conftest.dir/file ++ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) ++ rm -rf conftest.dir ++ if test -s conftest.tar; then ++ AM_RUN_LOG([$am__untar /dev/null 2>&1 && break ++ fi ++done ++rm -rf conftest.dir + +-To get pkg-config, see .])], +- [$4]) +-else +- $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS +- $1[]_LIBS=$pkg_cv_[]$1[]_LIBS +- AC_MSG_RESULT([yes]) +- ifelse([$3], , :, [$3]) +-fi[]dnl +-])# PKG_CHECK_MODULES ++AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) ++AC_MSG_RESULT([$am_cv_prog_tar_$1])]) ++AC_SUBST([am__tar]) ++AC_SUBST([am__untar]) ++]) # _AM_PROG_TAR + + m4_include([m4/gnome-doc-utils.m4]) + m4_include([m4/intltool.m4]) +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.24.0.1/capplets/about-me/Makefile.in gnome-control-center-2.24.0.1.new/capplets/about-me/Makefile.in +--- gnome-control-center-2.24.0.1/capplets/about-me/Makefile.in 2008-09-24 21:58:34.000000000 +0200 ++++ gnome-control-center-2.24.0.1.new/capplets/about-me/Makefile.in 2008-09-24 21:58:46.000000000 +0200 +@@ -306,7 +306,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.24.0.1/capplets/accessibility/at-properties/Makefile.in gnome-control-center-2.24.0.1.new/capplets/accessibility/at-properties/Makefile.in +--- gnome-control-center-2.24.0.1/capplets/accessibility/at-properties/Makefile.in 2008-09-24 21:58:34.000000000 +0200 ++++ gnome-control-center-2.24.0.1.new/capplets/accessibility/at-properties/Makefile.in 2008-09-24 21:58:46.000000000 +0200 +@@ -304,7 +304,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + gnome_at_properties_LDADD = $(AT_CAPPLET_LIBS) $(GNOMECC_CAPPLETS_LIBS) $(top_builddir)/capplets/common/libcommon.la +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.24.0.1/capplets/accessibility/Makefile.in gnome-control-center-2.24.0.1.new/capplets/accessibility/Makefile.in +--- gnome-control-center-2.24.0.1/capplets/accessibility/Makefile.in 2008-09-24 21:58:34.000000000 +0200 ++++ gnome-control-center-2.24.0.1.new/capplets/accessibility/Makefile.in 2008-09-24 21:58:46.000000000 +0200 +@@ -275,7 +275,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + SUBDIRS = at-properties +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.24.0.1/capplets/appearance/data/Makefile.in gnome-control-center-2.24.0.1.new/capplets/appearance/data/Makefile.in +--- gnome-control-center-2.24.0.1/capplets/appearance/data/Makefile.in 2008-09-24 21:58:34.000000000 +0200 ++++ gnome-control-center-2.24.0.1.new/capplets/appearance/data/Makefile.in 2008-09-24 21:58:47.000000000 +0200 +@@ -285,7 +285,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + gladedir = $(pkgdatadir)/glade +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.24.0.1/capplets/appearance/Makefile.in gnome-control-center-2.24.0.1.new/capplets/appearance/Makefile.in +--- gnome-control-center-2.24.0.1/capplets/appearance/Makefile.in 2008-09-24 21:58:34.000000000 +0200 ++++ gnome-control-center-2.24.0.1.new/capplets/appearance/Makefile.in 2008-09-24 21:58:47.000000000 +0200 +@@ -47,13 +47,14 @@ + binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) + PROGRAMS = $(bin_PROGRAMS) + am_gnome_appearance_properties_OBJECTS = appearance-desktop.$(OBJEXT) \ +- appearance-font.$(OBJEXT) appearance-main.$(OBJEXT) \ +- appearance-themes.$(OBJEXT) appearance-style.$(OBJEXT) \ +- appearance-ui.$(OBJEXT) gedit-message-area.$(OBJEXT) \ +- gnome-wp-info.$(OBJEXT) gnome-wp-item.$(OBJEXT) \ +- gnome-wp-xml.$(OBJEXT) theme-installer.$(OBJEXT) \ +- theme-save.$(OBJEXT) theme-util.$(OBJEXT) \ +- wp-cellrenderer.$(OBJEXT) caption-cellrenderer.$(OBJEXT) ++ appearance-effects.$(OBJEXT) appearance-font.$(OBJEXT) \ ++ appearance-main.$(OBJEXT) appearance-themes.$(OBJEXT) \ ++ appearance-style.$(OBJEXT) appearance-ui.$(OBJEXT) \ ++ gedit-message-area.$(OBJEXT) gnome-wp-info.$(OBJEXT) \ ++ gnome-wp-item.$(OBJEXT) gnome-wp-xml.$(OBJEXT) \ ++ theme-installer.$(OBJEXT) theme-save.$(OBJEXT) \ ++ theme-util.$(OBJEXT) wp-cellrenderer.$(OBJEXT) \ ++ caption-cellrenderer.$(OBJEXT) + gnome_appearance_properties_OBJECTS = \ + $(am_gnome_appearance_properties_OBJECTS) + am__DEPENDENCIES_1 = +@@ -311,7 +312,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + SUBDIRS = data +@@ -322,6 +322,8 @@ + appearance.h \ + appearance-desktop.c \ + appearance-desktop.h \ ++ appearance-effects.c\ ++ appearance-effects.h\ + appearance-font.c \ + appearance-font.h \ + appearance-main.c \ +@@ -444,6 +446,7 @@ + -rm -f *.tab.c + + @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/appearance-desktop.Po@am__quote@ ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/appearance-effects.Po@am__quote@ + @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/appearance-font.Po@am__quote@ + @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/appearance-main.Po@am__quote@ + @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/appearance-style.Po@am__quote@ +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.24.0.1/capplets/common/Makefile.in gnome-control-center-2.24.0.1.new/capplets/common/Makefile.in +--- gnome-control-center-2.24.0.1/capplets/common/Makefile.in 2008-09-24 21:58:34.000000000 +0200 ++++ gnome-control-center-2.24.0.1.new/capplets/common/Makefile.in 2008-09-24 21:58:47.000000000 +0200 +@@ -295,7 +295,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + EXTRA_DIST = ChangeLog +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.24.0.1/capplets/default-applications/Makefile.in gnome-control-center-2.24.0.1.new/capplets/default-applications/Makefile.in +--- gnome-control-center-2.24.0.1/capplets/default-applications/Makefile.in 2008-09-24 21:58:34.000000000 +0200 ++++ gnome-control-center-2.24.0.1.new/capplets/default-applications/Makefile.in 2008-09-24 21:58:47.000000000 +0200 +@@ -328,7 +328,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.24.0.1/capplets/display/Makefile.in gnome-control-center-2.24.0.1.new/capplets/display/Makefile.in +--- gnome-control-center-2.24.0.1/capplets/display/Makefile.in 2008-09-24 21:58:34.000000000 +0200 ++++ gnome-control-center-2.24.0.1.new/capplets/display/Makefile.in 2008-09-24 21:58:47.000000000 +0200 +@@ -316,7 +316,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.24.0.1/capplets/keybindings/Makefile.in gnome-control-center-2.24.0.1.new/capplets/keybindings/Makefile.in +--- gnome-control-center-2.24.0.1/capplets/keybindings/Makefile.in 2008-09-24 21:58:34.000000000 +0200 ++++ gnome-control-center-2.24.0.1.new/capplets/keybindings/Makefile.in 2008-09-24 21:58:47.000000000 +0200 +@@ -305,7 +305,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.24.0.1/capplets/keyboard/Makefile.in gnome-control-center-2.24.0.1.new/capplets/keyboard/Makefile.in +--- gnome-control-center-2.24.0.1/capplets/keyboard/Makefile.in 2008-09-24 21:58:34.000000000 +0200 ++++ gnome-control-center-2.24.0.1.new/capplets/keyboard/Makefile.in 2008-09-24 21:58:47.000000000 +0200 +@@ -308,7 +308,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.24.0.1/capplets/Makefile.in gnome-control-center-2.24.0.1.new/capplets/Makefile.in +--- gnome-control-center-2.24.0.1/capplets/Makefile.in 2008-09-24 21:58:34.000000000 +0200 ++++ gnome-control-center-2.24.0.1.new/capplets/Makefile.in 2008-09-24 21:58:46.000000000 +0200 +@@ -277,7 +277,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + always_built_SUBDIRS = \ +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.24.0.1/capplets/mouse/Makefile.in gnome-control-center-2.24.0.1.new/capplets/mouse/Makefile.in +--- gnome-control-center-2.24.0.1/capplets/mouse/Makefile.in 2008-09-24 21:58:34.000000000 +0200 ++++ gnome-control-center-2.24.0.1.new/capplets/mouse/Makefile.in 2008-09-24 21:58:47.000000000 +0200 +@@ -300,7 +300,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.24.0.1/capplets/network/Makefile.in gnome-control-center-2.24.0.1.new/capplets/network/Makefile.in +--- gnome-control-center-2.24.0.1/capplets/network/Makefile.in 2008-09-24 21:58:34.000000000 +0200 ++++ gnome-control-center-2.24.0.1.new/capplets/network/Makefile.in 2008-09-24 21:58:47.000000000 +0200 +@@ -314,7 +314,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.24.0.1/capplets/sound/Makefile.in gnome-control-center-2.24.0.1.new/capplets/sound/Makefile.in +--- gnome-control-center-2.24.0.1/capplets/sound/Makefile.in 2008-09-24 21:58:34.000000000 +0200 ++++ gnome-control-center-2.24.0.1.new/capplets/sound/Makefile.in 2008-09-24 21:58:47.000000000 +0200 +@@ -317,7 +317,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.24.0.1/capplets/windows/Makefile.in gnome-control-center-2.24.0.1.new/capplets/windows/Makefile.in +--- gnome-control-center-2.24.0.1/capplets/windows/Makefile.in 2008-09-24 21:58:36.000000000 +0200 ++++ gnome-control-center-2.24.0.1.new/capplets/windows/Makefile.in 2008-09-24 21:58:47.000000000 +0200 +@@ -301,7 +301,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.24.0.1/configure gnome-control-center-2.24.0.1.new/configure +--- gnome-control-center-2.24.0.1/configure 2008-09-24 21:58:34.000000000 +0200 ++++ gnome-control-center-2.24.0.1.new/configure 2008-09-24 21:58:46.000000000 +0200 +@@ -1,11 +1,11 @@ + #! /bin/sh + # Guess values for system-dependent variables and create Makefiles. +-# Generated by GNU Autoconf 2.62 for gnome-control-center 2.24.0.1. ++# Generated by GNU Autoconf 2.61 for gnome-control-center 2.24.0.1. + # + # Report bugs to . + # + # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +-# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. + # This configure script is free software; the Free Software Foundation + # gives unlimited permission to copy, distribute and modify it. + ## --------------------- ## +@@ -17,7 +17,7 @@ + if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: +- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +@@ -39,45 +39,17 @@ + as_cr_digits='0123456789' + as_cr_alnum=$as_cr_Letters$as_cr_digits + +-as_nl=' +-' +-export as_nl +-# Printing a long string crashes Solaris 7 /usr/bin/printf. +-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +-if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then +- as_echo='printf %s\n' +- as_echo_n='printf %s' +-else +- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then +- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' +- as_echo_n='/usr/ucb/echo -n' +- else +- as_echo_body='eval expr "X$1" : "X\\(.*\\)"' +- as_echo_n_body='eval +- arg=$1; +- case $arg in +- *"$as_nl"*) +- expr "X$arg" : "X\\(.*\\)$as_nl"; +- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; +- esac; +- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" +- ' +- export as_echo_n_body +- as_echo_n='sh -c $as_echo_n_body as_echo' +- fi +- export as_echo_body +- as_echo='sh -c $as_echo_body as_echo' +-fi +- + # The user is always right. + if test "${PATH_SEPARATOR+set}" != set; then +- PATH_SEPARATOR=: +- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { +- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || +- PATH_SEPARATOR=';' +- } ++ echo "#! /bin/sh" >conf$$.sh ++ echo "exit 0" >>conf$$.sh ++ chmod +x conf$$.sh ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then ++ PATH_SEPARATOR=';' ++ else ++ PATH_SEPARATOR=: ++ fi ++ rm -f conf$$.sh + fi + + # Support unset when possible. +@@ -93,6 +65,8 @@ + # there to prevent editors from complaining about space-tab. + # (If _AS_PATH_WALK were called with IFS unset, it would disable word + # splitting by setting IFS to empty value.) ++as_nl=' ++' + IFS=" "" $as_nl" + + # Find who we are. Look in the path if we contain no directory separator. +@@ -115,7 +89,7 @@ + as_myself=$0 + fi + if test ! -f "$as_myself"; then +- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } + fi + +@@ -128,10 +102,17 @@ + PS4='+ ' + + # NLS nuisances. +-LC_ALL=C +-export LC_ALL +-LANGUAGE=C +-export LANGUAGE ++for as_var in \ ++ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ ++ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ ++ LC_TELEPHONE LC_TIME ++do ++ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then ++ eval $as_var=C; export $as_var ++ else ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++ fi ++done + + # Required to use basename. + if expr a : '\(a\)' >/dev/null 2>&1 && +@@ -153,7 +134,7 @@ + $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +-$as_echo X/"$0" | ++echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q +@@ -179,7 +160,7 @@ + as_have_required=no + fi + +- if test $as_have_required = yes && (eval ": ++ if test $as_have_required = yes && (eval ": + (as_func_return () { + (exit \$1) + } +@@ -261,7 +242,7 @@ + if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: +- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +@@ -282,7 +263,7 @@ + if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: +- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +@@ -362,10 +343,10 @@ + + if test "x$CONFIG_SHELL" != x; then + for as_var in BASH_ENV ENV +- do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +- done +- export CONFIG_SHELL +- exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} ++ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++ done ++ export CONFIG_SHELL ++ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} + fi + + +@@ -434,10 +415,9 @@ + + test \$exitcode = 0") || { + echo No shell found that supports shell functions. +- echo Please tell bug-autoconf@gnu.org about your system, +- echo including any error possibly output before this message. +- echo This can help us improve future autoconf versions. +- echo Configuration will now proceed without shell functions. ++ echo Please tell autoconf@gnu.org about your system, ++ echo including any error possibly output before this ++ echo message + } + + +@@ -473,7 +453,7 @@ + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || +- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 ++ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems +@@ -501,6 +481,7 @@ + *) + ECHO_N='-n';; + esac ++ + if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +@@ -513,22 +494,19 @@ + rm -f conf$$.dir/conf$$.file + else + rm -f conf$$.dir +- mkdir conf$$.dir 2>/dev/null ++ mkdir conf$$.dir + fi +-if (echo >conf$$.file) 2>/dev/null; then +- if ln -s conf$$.file conf$$ 2>/dev/null; then +- as_ln_s='ln -s' +- # ... but there are two gotchas: +- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. +- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. +- # In both cases, we have to default to `cp -p'. +- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || +- as_ln_s='cp -p' +- elif ln conf$$.file conf$$ 2>/dev/null; then +- as_ln_s=ln +- else ++echo >conf$$.file ++if ln -s conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' +- fi ++elif ln conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s=ln + else + as_ln_s='cp -p' + fi +@@ -553,10 +531,10 @@ + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then +- test -d "$1/."; ++ test -d "$1/."; + else + case $1 in +- -*)set "./$1";; ++ -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + ???[sx]*):;;*)false;;esac;fi +@@ -843,7 +821,6 @@ + install_sh + STRIP + INSTALL_STRIP_PROGRAM +-MKDIR_P + mkdir_p + AWK + SET_MAKE +@@ -1036,34 +1013,6 @@ + LIBOBJS + LTLIBOBJS' + ac_subst_files='' +-ac_user_opts=' +-enable_option_checking +-enable_maintainer_mode +-enable_dependency_tracking +-enable_shared +-enable_static +-enable_fast_install +-with_gnu_ld +-enable_libtool_lock +-with_pic +-with_tags +-with_help_dir +-with_omf_dir +-with_help_formats +-enable_scrollkeeper +-enable_debug +-enable_compile_warnings +-enable_iso_c +-with_x +-enable_aboutme +-enable_hal +-with_gconf_source +-with_gconf_schema_file_dir +-enable_schemas_install +-enable_gstreamer +-with_libcanberra +-enable_update_mimedb +-' + ac_precious_vars='build_alias + host_alias + target_alias +@@ -1128,8 +1077,6 @@ + # Initialize some variables set by options. + ac_init_help= + ac_init_version=false +-ac_unrecognized_opts= +-ac_unrecognized_sep= + # The variables have the same names as the options, with + # dashes changed to underlines. + cache_file=/dev/null +@@ -1228,21 +1175,13 @@ + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) +- ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` ++ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && +- { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 ++ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } +- ac_useropt_orig=$ac_useropt +- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` +- case $ac_user_opts in +- *" +-"enable_$ac_useropt" +-"*) ;; +- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" +- ac_unrecognized_sep=', ';; +- esac +- eval enable_$ac_useropt=no ;; ++ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` ++ eval enable_$ac_feature=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; +@@ -1255,21 +1194,13 @@ + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) +- ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` ++ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && +- { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 ++ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } +- ac_useropt_orig=$ac_useropt +- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` +- case $ac_user_opts in +- *" +-"enable_$ac_useropt" +-"*) ;; +- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" +- ac_unrecognized_sep=', ';; +- esac +- eval enable_$ac_useropt=\$ac_optarg ;; ++ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` ++ eval enable_$ac_feature=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ +@@ -1460,38 +1391,22 @@ + ac_init_version=: ;; + + -with-* | --with-*) +- ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` ++ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && +- { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 ++ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } +- ac_useropt_orig=$ac_useropt +- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` +- case $ac_user_opts in +- *" +-"with_$ac_useropt" +-"*) ;; +- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" +- ac_unrecognized_sep=', ';; +- esac +- eval with_$ac_useropt=\$ac_optarg ;; ++ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` ++ eval with_$ac_package=\$ac_optarg ;; + + -without-* | --without-*) +- ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` ++ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && +- { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 ++ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } +- ac_useropt_orig=$ac_useropt +- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` +- case $ac_user_opts in +- *" +-"with_$ac_useropt" +-"*) ;; +- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" +- ac_unrecognized_sep=', ';; +- esac +- eval with_$ac_useropt=no ;; ++ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` ++ eval with_$ac_package=no ;; + + --x) + # Obsolete; use --with-x. +@@ -1511,7 +1426,7 @@ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + +- -*) { $as_echo "$as_me: error: unrecognized option: $ac_option ++ -*) { echo "$as_me: error: unrecognized option: $ac_option + Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } + ;; +@@ -1520,16 +1435,16 @@ + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && +- { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2 ++ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. +- $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 ++ echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && +- $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 ++ echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + ;; + +@@ -1538,38 +1453,22 @@ + + if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` +- { $as_echo "$as_me: error: missing argument to $ac_option" >&2 ++ { echo "$as_me: error: missing argument to $ac_option" >&2 + { (exit 1); exit 1; }; } + fi + +-if test -n "$ac_unrecognized_opts"; then +- case $enable_option_checking in +- no) ;; +- fatal) { $as_echo "$as_me: error: Unrecognized options: $ac_unrecognized_opts" >&2 +- { (exit 1); exit 1; }; } ;; +- *) $as_echo "$as_me: WARNING: Unrecognized options: $ac_unrecognized_opts" >&2 ;; +- esac +-fi +- +-# Check all directory arguments for consistency. ++# Be sure to have absolute directory names. + for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir + do + eval ac_val=\$$ac_var +- # Remove trailing slashes. +- case $ac_val in +- */ ) +- ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` +- eval $ac_var=\$ac_val;; +- esac +- # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac +- { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 ++ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; } + done + +@@ -1584,7 +1483,7 @@ + if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe +- $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. ++ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used." >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes +@@ -1600,10 +1499,10 @@ + ac_pwd=`pwd` && test -n "$ac_pwd" && + ac_ls_di=`ls -di .` && + ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || +- { $as_echo "$as_me: error: Working directory cannot be determined" >&2 ++ { echo "$as_me: error: Working directory cannot be determined" >&2 + { (exit 1); exit 1; }; } + test "X$ac_ls_di" = "X$ac_pwd_ls_di" || +- { $as_echo "$as_me: error: pwd does not report name of working directory" >&2 ++ { echo "$as_me: error: pwd does not report name of working directory" >&2 + { (exit 1); exit 1; }; } + + +@@ -1611,12 +1510,12 @@ + if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. +- ac_confdir=`$as_dirname -- "$as_myself" || +-$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$as_myself" : 'X\(//\)[^/]' \| \ +- X"$as_myself" : 'X\(//\)$' \| \ +- X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +-$as_echo X"$as_myself" | ++ ac_confdir=`$as_dirname -- "$0" || ++$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$0" : 'X\(//\)[^/]' \| \ ++ X"$0" : 'X\(//\)$' \| \ ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$0" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q +@@ -1643,12 +1542,12 @@ + fi + if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." +- { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 ++ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } + fi + ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" + ac_abs_confdir=`( +- cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2 ++ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 + { (exit 1); exit 1; }; } + pwd)` + # When building in place, set srcdir=. +@@ -1697,9 +1596,9 @@ + + Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX +- [$ac_default_prefix] ++ [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX +- [PREFIX] ++ [PREFIX] + + By default, \`make install' will install all the files in + \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +@@ -1709,26 +1608,25 @@ + For better control, use the options below. + + Fine tuning of the installation directories: +- --bindir=DIR user executables [EPREFIX/bin] +- --sbindir=DIR system admin executables [EPREFIX/sbin] +- --libexecdir=DIR program executables [EPREFIX/libexec] +- --sysconfdir=DIR read-only single-machine data [PREFIX/etc] +- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] +- --localstatedir=DIR modifiable single-machine data [PREFIX/var] +- --libdir=DIR object code libraries [EPREFIX/lib] +- --includedir=DIR C header files [PREFIX/include] +- --oldincludedir=DIR C header files for non-gcc [/usr/include] +- --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] +- --datadir=DIR read-only architecture-independent data [DATAROOTDIR] +- --infodir=DIR info documentation [DATAROOTDIR/info] +- --localedir=DIR locale-dependent data [DATAROOTDIR/locale] +- --mandir=DIR man documentation [DATAROOTDIR/man] +- --docdir=DIR documentation root +- [DATAROOTDIR/doc/gnome-control-center] +- --htmldir=DIR html documentation [DOCDIR] +- --dvidir=DIR dvi documentation [DOCDIR] +- --pdfdir=DIR pdf documentation [DOCDIR] +- --psdir=DIR ps documentation [DOCDIR] ++ --bindir=DIR user executables [EPREFIX/bin] ++ --sbindir=DIR system admin executables [EPREFIX/sbin] ++ --libexecdir=DIR program executables [EPREFIX/libexec] ++ --sysconfdir=DIR read-only single-machine data [PREFIX/etc] ++ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] ++ --localstatedir=DIR modifiable single-machine data [PREFIX/var] ++ --libdir=DIR object code libraries [EPREFIX/lib] ++ --includedir=DIR C header files [PREFIX/include] ++ --oldincludedir=DIR C header files for non-gcc [/usr/include] ++ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] ++ --datadir=DIR read-only architecture-independent data [DATAROOTDIR] ++ --infodir=DIR info documentation [DATAROOTDIR/info] ++ --localedir=DIR locale-dependent data [DATAROOTDIR/locale] ++ --mandir=DIR man documentation [DATAROOTDIR/man] ++ --docdir=DIR documentation root [DATAROOTDIR/doc/gnome-control-center] ++ --htmldir=DIR html documentation [DOCDIR] ++ --dvidir=DIR dvi documentation [DOCDIR] ++ --pdfdir=DIR pdf documentation [DOCDIR] ++ --psdir=DIR ps documentation [DOCDIR] + _ACEOF + + cat <<\_ACEOF +@@ -1755,7 +1653,6 @@ + cat <<\_ACEOF + + Optional Features: +- --disable-option-checking ignore unrecognized --enable/--with options + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-maintainer-mode enable make rules and dependencies not useful +@@ -1900,17 +1797,15 @@ + if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue +- test -d "$ac_dir" || +- { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || +- continue ++ test -d "$ac_dir" || continue + ac_builddir=. + + case "$ac_dir" in + .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) +- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` ++ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A ".." for each directory in $ac_dir_suffix. +- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; +@@ -1946,7 +1841,7 @@ + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else +- $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 ++ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +@@ -1956,10 +1851,10 @@ + if $ac_init_version; then + cat <<\_ACEOF + gnome-control-center configure 2.24.0.1 +-generated by GNU Autoconf 2.62 ++generated by GNU Autoconf 2.61 + + Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. + This configure script is free software; the Free Software Foundation + gives unlimited permission to copy, distribute and modify it. + _ACEOF +@@ -1970,7 +1865,7 @@ + running configure, to aid debugging if configure makes a mistake. + + It was created by gnome-control-center $as_me 2.24.0.1, which was +-generated by GNU Autoconf 2.62. Invocation command line was ++generated by GNU Autoconf 2.61. Invocation command line was + + $ $0 $@ + +@@ -2006,7 +1901,7 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- $as_echo "PATH: $as_dir" ++ echo "PATH: $as_dir" + done + IFS=$as_save_IFS + +@@ -2041,7 +1936,7 @@ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) +- ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; ++ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; +@@ -2093,12 +1988,11 @@ + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( +- *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 +-$as_echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( +- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) $as_unset $ac_var ;; + esac ;; + esac +@@ -2128,9 +2022,9 @@ + do + eval ac_val=\$$ac_var + case $ac_val in +- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac +- $as_echo "$ac_var='\''$ac_val'\''" ++ echo "$ac_var='\''$ac_val'\''" + done | sort + echo + +@@ -2145,9 +2039,9 @@ + do + eval ac_val=\$$ac_var + case $ac_val in +- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac +- $as_echo "$ac_var='\''$ac_val'\''" ++ echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi +@@ -2163,8 +2057,8 @@ + echo + fi + test "$ac_signal" != 0 && +- $as_echo "$as_me: caught signal $ac_signal" +- $as_echo "$as_me: exit $exit_status" ++ echo "$as_me: caught signal $ac_signal" ++ echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && +@@ -2206,24 +2100,21 @@ + + + # Let the site file select an alternate cache file if it wants to. +-# Prefer an explicitly selected file to automatically selected ones. +-ac_site_file1=NONE +-ac_site_file2=NONE ++# Prefer explicitly selected file to automatically selected ones. + if test -n "$CONFIG_SITE"; then +- ac_site_file1=$CONFIG_SITE ++ set x "$CONFIG_SITE" + elif test "x$prefix" != xNONE; then +- ac_site_file1=$prefix/share/config.site +- ac_site_file2=$prefix/etc/config.site ++ set x "$prefix/share/config.site" "$prefix/etc/config.site" + else +- ac_site_file1=$ac_default_prefix/share/config.site +- ac_site_file2=$ac_default_prefix/etc/config.site ++ set x "$ac_default_prefix/share/config.site" \ ++ "$ac_default_prefix/etc/config.site" + fi +-for ac_site_file in "$ac_site_file1" "$ac_site_file2" ++shift ++for ac_site_file + do +- test "x$ac_site_file" = xNONE && continue + if test -r "$ac_site_file"; then +- { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 +-$as_echo "$as_me: loading site script $ac_site_file" >&6;} ++ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 ++echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" + fi +@@ -2233,16 +2124,16 @@ + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then +- { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5 +-$as_echo "$as_me: loading cache $cache_file" >&6;} ++ { echo "$as_me:$LINENO: loading cache $cache_file" >&5 ++echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi + else +- { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5 +-$as_echo "$as_me: creating cache $cache_file" >&6;} ++ { echo "$as_me:$LINENO: creating cache $cache_file" >&5 ++echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file + fi + +@@ -2256,38 +2147,29 @@ + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) +- { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +-$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ++ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 ++echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) +- { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 +-$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ++ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 ++echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then +- # differences in whitespace do not lead to failure. +- ac_old_val_w=`echo x $ac_old_val` +- ac_new_val_w=`echo x $ac_new_val` +- if test "$ac_old_val_w" != "$ac_new_val_w"; then +- { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 +-$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} +- ac_cache_corrupted=: +- else +- { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +-$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} +- eval $ac_var=\$ac_old_val +- fi +- { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5 +-$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} +- { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5 +-$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} ++ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 ++echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ++ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 ++echo "$as_me: former value: $ac_old_val" >&2;} ++ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 ++echo "$as_me: current value: $ac_new_val" >&2;} ++ ac_cache_corrupted=: + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in +- *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; ++ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in +@@ -2297,10 +2179,10 @@ + fi + done + if $ac_cache_corrupted; then +- { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 +-$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} +- { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +-$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} ++ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 ++echo "$as_me: error: changes in the environment can compromise the build" >&2;} ++ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 ++echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } + fi + +@@ -2360,8 +2242,8 @@ + fi + done + if test -z "$ac_aux_dir"; then +- { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 +-$as_echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} ++ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 ++echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} + { (exit 1); exit 1; }; } + fi + +@@ -2387,12 +2269,11 @@ + # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" + # OS/2's system install, which has a completely different semantic + # ./install, which can be erroneously created by make from ./install.sh. +-# Reject install programs that cannot install multiple files. +-{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +-$as_echo_n "checking for a BSD-compatible install... " >&6; } ++{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 ++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } + if test -z "$INSTALL"; then + if test "${ac_cv_path_install+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH +@@ -2421,29 +2302,17 @@ + # program-specific install script used by HP pwplus--don't use. + : + else +- rm -rf conftest.one conftest.two conftest.dir +- echo one > conftest.one +- echo two > conftest.two +- mkdir conftest.dir +- if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && +- test -s conftest.one && test -s conftest.two && +- test -s conftest.dir/conftest.one && +- test -s conftest.dir/conftest.two +- then +- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" +- break 3 +- fi ++ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" ++ break 3 + fi + fi + done + done + ;; + esac +- + done + IFS=$as_save_IFS + +-rm -rf conftest.one conftest.two conftest.dir + + fi + if test "${ac_cv_path_install+set}" = set; then +@@ -2456,8 +2325,8 @@ + INSTALL=$ac_install_sh + fi + fi +-{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 +-$as_echo "$INSTALL" >&6; } ++{ echo "$as_me:$LINENO: result: $INSTALL" >&5 ++echo "${ECHO_T}$INSTALL" >&6; } + + # Use test -z because SunOS4 sh mishandles braces in ${var-val}. + # It thinks the first close brace ends the variable substitution. +@@ -2467,8 +2336,8 @@ + + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +-{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5 +-$as_echo_n "checking whether build environment is sane... " >&6; } ++{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5 ++echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } + # Just in case + sleep 1 + echo timestamp > conftest.file +@@ -2491,9 +2360,9 @@ + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". +- { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken ++ { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken + alias in your environment" >&5 +-$as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken ++echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken + alias in your environment" >&2;} + { (exit 1); exit 1; }; } + fi +@@ -2504,23 +2373,26 @@ + # Ok. + : + else +- { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files! ++ { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! + Check your system clock" >&5 +-$as_echo "$as_me: error: newly created file is older than distributed files! ++echo "$as_me: error: newly created file is older than distributed files! + Check your system clock" >&2;} + { (exit 1); exit 1; }; } + fi +-{ $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++{ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" + # Use a double $ so make ignores it. + test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +-# Double any \ or $. ++# Double any \ or $. echo might interpret backslashes. + # By default was `s,x,x', remove it if useless. +-ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' +-program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` ++cat <<\_ACEOF >conftest.sed ++s/[\\$]/&&/g;s/;s,x,x,$// ++_ACEOF ++program_transform_name=`echo $program_transform_name | sed -f conftest.sed` ++rm -f conftest.sed + + # expand $ac_aux_dir to an absolute path + am_aux_dir=`cd $ac_aux_dir && pwd` +@@ -2531,15 +2403,15 @@ + am_missing_run="$MISSING --run " + else + am_missing_run= +- { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 +-$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} ++ { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 ++echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} + fi + +-{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5 +-$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } ++{ echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5 ++echo $ECHO_N "checking for a thread-safe mkdir -p... $ECHO_C" >&6; } + if test -z "$MKDIR_P"; then + if test "${ac_cv_path_mkdir+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +@@ -2574,8 +2446,8 @@ + MKDIR_P="$ac_install_sh -d" + fi + fi +-{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5 +-$as_echo "$MKDIR_P" >&6; } ++{ echo "$as_me:$LINENO: result: $MKDIR_P" >&5 ++echo "${ECHO_T}$MKDIR_P" >&6; } + + mkdir_p="$MKDIR_P" + case $mkdir_p in +@@ -2587,10 +2459,10 @@ + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_AWK+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +@@ -2603,7 +2475,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AWK="$ac_prog" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -2614,23 +2486,22 @@ + fi + AWK=$ac_cv_prog_AWK + if test -n "$AWK"; then +- { $as_echo "$as_me:$LINENO: result: $AWK" >&5 +-$as_echo "$AWK" >&6; } ++ { echo "$as_me:$LINENO: result: $AWK" >&5 ++echo "${ECHO_T}$AWK" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + + test -n "$AWK" && break + done + +-{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +-$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +-set x ${MAKE-make} +-ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` ++{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 ++echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } ++set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` + if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.make <<\_ACEOF + SHELL = /bin/sh +@@ -2647,12 +2518,12 @@ + rm -f conftest.make + fi + if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + SET_MAKE= + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" + fi + +@@ -2671,8 +2542,8 @@ + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then +- { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 +-$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} ++ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 ++echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} + { (exit 1); exit 1; }; } + fi + fi +@@ -2727,10 +2598,10 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. + set dummy ${ac_tool_prefix}strip; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_STRIP+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +@@ -2743,7 +2614,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -2754,11 +2625,11 @@ + fi + STRIP=$ac_cv_prog_STRIP + if test -n "$STRIP"; then +- { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 +-$as_echo "$STRIP" >&6; } ++ { echo "$as_me:$LINENO: result: $STRIP" >&5 ++echo "${ECHO_T}$STRIP" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -2767,10 +2638,10 @@ + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. + set dummy strip; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +@@ -2783,7 +2654,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -2794,11 +2665,11 @@ + fi + ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP + if test -n "$ac_ct_STRIP"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +-$as_echo "$ac_ct_STRIP" >&6; } ++ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 ++echo "${ECHO_T}$ac_ct_STRIP" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + if test "x$ac_ct_STRIP" = x; then +@@ -2806,10 +2677,10 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&5 +-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&2;} + ac_tool_warned=yes ;; +@@ -2830,8 +2701,8 @@ + AMTAR=${AMTAR-"${am_missing_run}tar"} + + +-{ $as_echo "$as_me:$LINENO: checking how to create a ustar tar archive" >&5 +-$as_echo_n "checking how to create a ustar tar archive... " >&6; } ++{ echo "$as_me:$LINENO: checking how to create a ustar tar archive" >&5 ++echo $ECHO_N "checking how to create a ustar tar archive... $ECHO_C" >&6; } + # Loop over all known methods to create a tar archive until one works. + _am_tools='gnutar plaintar pax cpio none' + _am_tools=${am_cv_prog_tar_ustar-$_am_tools} +@@ -2904,20 +2775,20 @@ + rm -rf conftest.dir + + if test "${am_cv_prog_tar_ustar+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + am_cv_prog_tar_ustar=$_am_tool + fi + +-{ $as_echo "$as_me:$LINENO: result: $am_cv_prog_tar_ustar" >&5 +-$as_echo "$am_cv_prog_tar_ustar" >&6; } ++{ echo "$as_me:$LINENO: result: $am_cv_prog_tar_ustar" >&5 ++echo "${ECHO_T}$am_cv_prog_tar_ustar" >&6; } + + + + + +-{ $as_echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 +-$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } ++{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 ++echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; } + # Check whether --enable-maintainer-mode was given. + if test "${enable_maintainer_mode+set}" = set; then + enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval +@@ -2925,8 +2796,8 @@ + USE_MAINTAINER_MODE=no + fi + +- { $as_echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 +-$as_echo "$USE_MAINTAINER_MODE" >&6; } ++ { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 ++echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; } + if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +@@ -2951,8 +2822,8 @@ + .PHONY: am__doit + END + # If we don't find an include directive, just comment out the code. +-{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 +-$as_echo_n "checking for style of include used by $am_make... " >&6; } ++{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 ++echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; } + am__include="#" + am__quote= + _am_result=none +@@ -2979,8 +2850,8 @@ + fi + + +-{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5 +-$as_echo "$_am_result" >&6; } ++{ echo "$as_me:$LINENO: result: $_am_result" >&5 ++echo "${ECHO_T}$_am_result" >&6; } + rm -f confinc confmf + + # Check whether --enable-dependency-tracking was given. +@@ -3009,10 +2880,10 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. + set dummy ${ac_tool_prefix}gcc; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +@@ -3025,7 +2896,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -3036,11 +2907,11 @@ + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- { $as_echo "$as_me:$LINENO: result: $CC" >&5 +-$as_echo "$CC" >&6; } ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -3049,10 +2920,10 @@ + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. + set dummy gcc; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +@@ -3065,7 +2936,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="gcc" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -3076,11 +2947,11 @@ + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-$as_echo "$ac_ct_CC" >&6; } ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + if test "x$ac_ct_CC" = x; then +@@ -3088,10 +2959,10 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&5 +-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&2;} + ac_tool_warned=yes ;; +@@ -3106,10 +2977,10 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. + set dummy ${ac_tool_prefix}cc; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +@@ -3122,7 +2993,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}cc" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -3133,11 +3004,11 @@ + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- { $as_echo "$as_me:$LINENO: result: $CC" >&5 +-$as_echo "$CC" >&6; } ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -3146,10 +3017,10 @@ + if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. + set dummy cc; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +@@ -3167,7 +3038,7 @@ + continue + fi + ac_cv_prog_CC="cc" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -3190,11 +3061,11 @@ + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- { $as_echo "$as_me:$LINENO: result: $CC" >&5 +-$as_echo "$CC" >&6; } ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -3205,10 +3076,10 @@ + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. + set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +@@ -3221,7 +3092,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -3232,11 +3103,11 @@ + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- { $as_echo "$as_me:$LINENO: result: $CC" >&5 +-$as_echo "$CC" >&6; } ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -3249,10 +3120,10 @@ + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +@@ -3265,7 +3136,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="$ac_prog" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -3276,11 +3147,11 @@ + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-$as_echo "$ac_ct_CC" >&6; } ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -3292,10 +3163,10 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&5 +-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&2;} + ac_tool_warned=yes ;; +@@ -3307,48 +3178,44 @@ + fi + + +-test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH ++test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: no acceptable C compiler found in \$PATH ++echo "$as_me: error: no acceptable C compiler found in \$PATH + See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + + # Provide some information about the compiler. +-$as_echo "$as_me:$LINENO: checking for C compiler version" >&5 +-set X $ac_compile +-ac_compiler=$2 ++echo "$as_me:$LINENO: checking for C compiler version" >&5 ++ac_compiler=`set X $ac_compile; echo $2` + { (ac_try="$ac_compiler --version >&5" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + { (ac_try="$ac_compiler -v >&5" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + { (ac_try="$ac_compiler -V >&5" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + + cat >conftest.$ac_ext <<_ACEOF +@@ -3367,22 +3234,27 @@ + } + _ACEOF + ac_clean_files_save=$ac_clean_files +-ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" ++ac_clean_files="$ac_clean_files a.out a.exe b.out" + # Try to create an executable without -o first, disregard a.out. + # It will help us diagnose broken compilers, and finding out an intuition + # of exeext. +-{ $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +-$as_echo_n "checking for C compiler default output file name... " >&6; } +-ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` +- +-# The possible output files: +-ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" +- ++{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 ++echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; } ++ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` ++# ++# List of possible output files, starting from the most likely. ++# The algorithm is not robust to junk in `.', hence go to wildcards (a.*) ++# only as a last resort. b.out is created by i960 compilers. ++ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out' ++# ++# The IRIX 6 linker writes into existing files which may not be ++# executable, retaining their permissions. Remove them first so a ++# subsequent execution test works. + ac_rmfiles= + for ac_file in $ac_files + do + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac + done +@@ -3393,11 +3265,10 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. + # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +@@ -3408,7 +3279,7 @@ + do + test -f "$ac_file" || continue + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most +@@ -3435,15 +3306,15 @@ + ac_file='' + fi + +-{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5 +-$as_echo "$ac_file" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_file" >&5 ++echo "${ECHO_T}$ac_file" >&6; } + if test -z "$ac_file"; then +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-{ { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables ++{ { echo "$as_me:$LINENO: error: C compiler cannot create executables + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: C compiler cannot create executables ++echo "$as_me: error: C compiler cannot create executables + See \`config.log' for more details." >&2;} + { (exit 77); exit 77; }; } + fi +@@ -3452,8 +3323,8 @@ + + # Check that the compiler produces executables we can run. If not, either + # the compiler is broken, or we cross compile. +-{ $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +-$as_echo_n "checking whether the C compiler works... " >&6; } ++{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5 ++echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; } + # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 + # If not cross compiling, check that we can run a simple program. + if test "$cross_compiling" != yes; then +@@ -3462,51 +3333,49 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else +- { { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs. ++ { { echo "$as_me:$LINENO: error: cannot run C compiled programs. + If you meant to cross compile, use \`--host'. + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: cannot run C compiled programs. ++echo "$as_me: error: cannot run C compiled programs. + If you meant to cross compile, use \`--host'. + See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + fi + fi + fi +-{ $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++{ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + +-rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ++rm -f a.out a.exe conftest$ac_cv_exeext b.out + ac_clean_files=$ac_clean_files_save + # Check that the compiler produces executables we can run. If not, either + # the compiler is broken, or we cross compile. +-{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +-$as_echo_n "checking whether we are cross compiling... " >&6; } +-{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5 +-$as_echo "$cross_compiling" >&6; } ++{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 ++echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; } ++{ echo "$as_me:$LINENO: result: $cross_compiling" >&5 ++echo "${ECHO_T}$cross_compiling" >&6; } + +-{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5 +-$as_echo_n "checking for suffix of executables... " >&6; } ++{ echo "$as_me:$LINENO: checking for suffix of executables" >&5 ++echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; } + if { (ac_try="$ac_link" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # If both `conftest.exe' and `conftest' are `present' (well, observable) + # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +@@ -3515,31 +3384,31 @@ + for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac + done + else +- { { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link ++ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link ++echo "$as_me: error: cannot compute suffix of executables: cannot compile and link + See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + fi + + rm -f conftest$ac_cv_exeext +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +-$as_echo "$ac_cv_exeext" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 ++echo "${ECHO_T}$ac_cv_exeext" >&6; } + + rm -f conftest.$ac_ext + EXEEXT=$ac_cv_exeext + ac_exeext=$EXEEXT +-{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5 +-$as_echo_n "checking for suffix of object files... " >&6; } ++{ echo "$as_me:$LINENO: checking for suffix of object files" >&5 ++echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; } + if test "${ac_cv_objext+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -3562,41 +3431,40 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac + done + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile ++{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile ++echo "$as_me: error: cannot compute suffix of object files: cannot compile + See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + fi + + rm -f conftest.$ac_cv_objext conftest.$ac_ext + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +-$as_echo "$ac_cv_objext" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 ++echo "${ECHO_T}$ac_cv_objext" >&6; } + OBJEXT=$ac_cv_objext + ac_objext=$OBJEXT +-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +-$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } ++{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 ++echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } + if test "${ac_cv_c_compiler_gnu+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -3622,21 +3490,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_compiler_gnu=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_compiler_gnu=no +@@ -3646,19 +3513,15 @@ + ac_cv_c_compiler_gnu=$ac_compiler_gnu + + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +-$as_echo "$ac_cv_c_compiler_gnu" >&6; } +-if test $ac_compiler_gnu = yes; then +- GCC=yes +-else +- GCC= +-fi ++{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 ++echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } ++GCC=`test $ac_compiler_gnu = yes && echo yes` + ac_test_CFLAGS=${CFLAGS+set} + ac_save_CFLAGS=$CFLAGS +-{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +-$as_echo_n "checking whether $CC accepts -g... " >&6; } ++{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 ++echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } + if test "${ac_cv_prog_cc_g+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes +@@ -3685,21 +3548,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + CFLAGS="" +@@ -3724,21 +3586,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + : + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_c_werror_flag=$ac_save_c_werror_flag +@@ -3764,21 +3625,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + +@@ -3793,8 +3653,8 @@ + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +-$as_echo "$ac_cv_prog_cc_g" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 ++echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } + if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS + elif test $ac_cv_prog_cc_g = yes; then +@@ -3810,10 +3670,10 @@ + CFLAGS= + fi + fi +-{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 +-$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } ++{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 ++echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } + if test "${ac_cv_prog_cc_c89+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_cv_prog_cc_c89=no + ac_save_CC=$CC +@@ -3884,21 +3744,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_c89=$ac_arg + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + +@@ -3914,15 +3773,15 @@ + # AC_CACHE_VAL + case "x$ac_cv_prog_cc_c89" in + x) +- { $as_echo "$as_me:$LINENO: result: none needed" >&5 +-$as_echo "none needed" >&6; } ;; ++ { echo "$as_me:$LINENO: result: none needed" >&5 ++echo "${ECHO_T}none needed" >&6; } ;; + xno) +- { $as_echo "$as_me:$LINENO: result: unsupported" >&5 +-$as_echo "unsupported" >&6; } ;; ++ { echo "$as_me:$LINENO: result: unsupported" >&5 ++echo "${ECHO_T}unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" +- { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 +-$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; ++ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 ++echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; + esac + + +@@ -3934,10 +3793,10 @@ + + depcc="$CC" am_compiler_list= + +-{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +-$as_echo_n "checking dependency style of $depcc... " >&6; } ++{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 ++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } + if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up +@@ -4025,8 +3884,8 @@ + fi + + fi +-{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 +-$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } ++{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 ++echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } + CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + if +@@ -4041,10 +3900,10 @@ + + + +-{ $as_echo "$as_me:$LINENO: checking for library containing strerror" >&5 +-$as_echo_n "checking for library containing strerror... " >&6; } ++{ echo "$as_me:$LINENO: checking for library containing strerror" >&5 ++echo $ECHO_N "checking for library containing strerror... $ECHO_C" >&6; } + if test "${ac_cv_search_strerror+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_func_search_save_LIBS=$LIBS + cat >conftest.$ac_ext <<_ACEOF +@@ -4082,30 +3941,26 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_search_strerror=$ac_res + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext + if test "${ac_cv_search_strerror+set}" = set; then +@@ -4120,8 +3975,8 @@ + rm conftest.$ac_ext + LIBS=$ac_func_search_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_search_strerror" >&5 +-$as_echo "$ac_cv_search_strerror" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_search_strerror" >&5 ++echo "${ECHO_T}$ac_cv_search_strerror" >&6; } + ac_res=$ac_cv_search_strerror + if test "$ac_res" != no; then + test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" +@@ -4136,10 +3991,10 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. + set dummy ${ac_tool_prefix}gcc; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +@@ -4152,7 +4007,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -4163,11 +4018,11 @@ + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- { $as_echo "$as_me:$LINENO: result: $CC" >&5 +-$as_echo "$CC" >&6; } ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -4176,10 +4031,10 @@ + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. + set dummy gcc; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +@@ -4192,7 +4047,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="gcc" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -4203,11 +4058,11 @@ + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-$as_echo "$ac_ct_CC" >&6; } ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + if test "x$ac_ct_CC" = x; then +@@ -4215,10 +4070,10 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&5 +-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&2;} + ac_tool_warned=yes ;; +@@ -4233,10 +4088,10 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. + set dummy ${ac_tool_prefix}cc; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +@@ -4249,7 +4104,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}cc" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -4260,11 +4115,11 @@ + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- { $as_echo "$as_me:$LINENO: result: $CC" >&5 +-$as_echo "$CC" >&6; } ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -4273,10 +4128,10 @@ + if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. + set dummy cc; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +@@ -4294,7 +4149,7 @@ + continue + fi + ac_cv_prog_CC="cc" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -4317,11 +4172,11 @@ + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- { $as_echo "$as_me:$LINENO: result: $CC" >&5 +-$as_echo "$CC" >&6; } ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -4332,10 +4187,10 @@ + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. + set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +@@ -4348,7 +4203,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -4359,11 +4214,11 @@ + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- { $as_echo "$as_me:$LINENO: result: $CC" >&5 +-$as_echo "$CC" >&6; } ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -4376,10 +4231,10 @@ + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +@@ -4392,7 +4247,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="$ac_prog" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -4403,11 +4258,11 @@ + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-$as_echo "$ac_ct_CC" >&6; } ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -4419,10 +4274,10 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&5 +-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&2;} + ac_tool_warned=yes ;; +@@ -4434,54 +4289,50 @@ + fi + + +-test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH ++test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: no acceptable C compiler found in \$PATH ++echo "$as_me: error: no acceptable C compiler found in \$PATH + See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + + # Provide some information about the compiler. +-$as_echo "$as_me:$LINENO: checking for C compiler version" >&5 +-set X $ac_compile +-ac_compiler=$2 ++echo "$as_me:$LINENO: checking for C compiler version" >&5 ++ac_compiler=`set X $ac_compile; echo $2` + { (ac_try="$ac_compiler --version >&5" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + { (ac_try="$ac_compiler -v >&5" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + { (ac_try="$ac_compiler -V >&5" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +-$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } ++{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 ++echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } + if test "${ac_cv_c_compiler_gnu+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -4507,21 +4358,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_compiler_gnu=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_compiler_gnu=no +@@ -4531,19 +4381,15 @@ + ac_cv_c_compiler_gnu=$ac_compiler_gnu + + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +-$as_echo "$ac_cv_c_compiler_gnu" >&6; } +-if test $ac_compiler_gnu = yes; then +- GCC=yes +-else +- GCC= +-fi ++{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 ++echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } ++GCC=`test $ac_compiler_gnu = yes && echo yes` + ac_test_CFLAGS=${CFLAGS+set} + ac_save_CFLAGS=$CFLAGS +-{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +-$as_echo_n "checking whether $CC accepts -g... " >&6; } ++{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 ++echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } + if test "${ac_cv_prog_cc_g+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes +@@ -4570,21 +4416,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + CFLAGS="" +@@ -4609,21 +4454,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + : + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_c_werror_flag=$ac_save_c_werror_flag +@@ -4649,21 +4493,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + +@@ -4678,8 +4521,8 @@ + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +-$as_echo "$ac_cv_prog_cc_g" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 ++echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } + if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS + elif test $ac_cv_prog_cc_g = yes; then +@@ -4695,10 +4538,10 @@ + CFLAGS= + fi + fi +-{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 +-$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } ++{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 ++echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } + if test "${ac_cv_prog_cc_c89+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_cv_prog_cc_c89=no + ac_save_CC=$CC +@@ -4769,21 +4612,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_c89=$ac_arg + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + +@@ -4799,15 +4641,15 @@ + # AC_CACHE_VAL + case "x$ac_cv_prog_cc_c89" in + x) +- { $as_echo "$as_me:$LINENO: result: none needed" >&5 +-$as_echo "none needed" >&6; } ;; ++ { echo "$as_me:$LINENO: result: none needed" >&5 ++echo "${ECHO_T}none needed" >&6; } ;; + xno) +- { $as_echo "$as_me:$LINENO: result: unsupported" >&5 +-$as_echo "unsupported" >&6; } ;; ++ { echo "$as_me:$LINENO: result: unsupported" >&5 ++echo "${ECHO_T}unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" +- { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 +-$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; ++ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 ++echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; + esac + + +@@ -4819,10 +4661,10 @@ + + depcc="$CC" am_compiler_list= + +-{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +-$as_echo_n "checking dependency style of $depcc... " >&6; } ++{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 ++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } + if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up +@@ -4910,8 +4752,8 @@ + fi + + fi +-{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 +-$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } ++{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 ++echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } + CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + if +@@ -4926,16 +4768,16 @@ + + + if test "x$CC" != xcc; then +- { $as_echo "$as_me:$LINENO: checking whether $CC and cc understand -c and -o together" >&5 +-$as_echo_n "checking whether $CC and cc understand -c and -o together... " >&6; } ++ { echo "$as_me:$LINENO: checking whether $CC and cc understand -c and -o together" >&5 ++echo $ECHO_N "checking whether $CC and cc understand -c and -o together... $ECHO_C" >&6; } + else +- { $as_echo "$as_me:$LINENO: checking whether cc understands -c and -o together" >&5 +-$as_echo_n "checking whether cc understands -c and -o together... " >&6; } ++ { echo "$as_me:$LINENO: checking whether cc understands -c and -o together" >&5 ++echo $ECHO_N "checking whether cc understands -c and -o together... $ECHO_C" >&6; } + fi +-set dummy $CC; ac_cc=`$as_echo "$2" | ++set dummy $CC; ac_cc=`echo $2 | + sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` + if { as_var=ac_cv_prog_cc_${ac_cc}_c_o; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -4961,21 +4803,19 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + test -f conftest2.$ac_objext && { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; + then + eval ac_cv_prog_cc_${ac_cc}_c_o=yes +@@ -4986,11 +4826,10 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5' + rm -f conftest2.* +@@ -4998,21 +4837,19 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + test -f conftest2.$ac_objext && { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; + then + # cc works too. +@@ -5030,11 +4867,11 @@ + + fi + if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + + cat >>confdefs.h <<\_ACEOF + #define NO_MINUS_C_MINUS_O 1 +@@ -5061,15 +4898,15 @@ + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_c_compiler_gnu +-{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +-$as_echo_n "checking how to run the C preprocessor... " >&6; } ++{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 ++echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; } + # On Suns, sometimes $CPP names a directory. + if test -n "$CPP" && test -d "$CPP"; then + CPP= + fi + if test -z "$CPP"; then + if test "${ac_cv_prog_CPP+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" +@@ -5101,21 +4938,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + : + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +@@ -5139,14 +4975,13 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err +@@ -5154,7 +4989,7 @@ + # Broken: success on invalid input. + continue + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +@@ -5179,8 +5014,8 @@ + else + ac_cv_prog_CPP=$CPP + fi +-{ $as_echo "$as_me:$LINENO: result: $CPP" >&5 +-$as_echo "$CPP" >&6; } ++{ echo "$as_me:$LINENO: result: $CPP" >&5 ++echo "${ECHO_T}$CPP" >&6; } + ac_preproc_ok=false + for ac_c_preproc_warn_flag in '' yes + do +@@ -5208,21 +5043,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + : + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +@@ -5246,14 +5080,13 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err +@@ -5261,7 +5094,7 @@ + # Broken: success on invalid input. + continue + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +@@ -5277,9 +5110,9 @@ + if $ac_preproc_ok; then + : + else +- { { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check ++ { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check ++echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check + See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + fi +@@ -5291,37 +5124,42 @@ + ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +-{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 +-$as_echo_n "checking for grep that handles long lines and -e... " >&6; } ++{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 ++echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; } ++if test "${ac_cv_path_GREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ # Extract the first word of "grep ggrep" to use in msg output ++if test -z "$GREP"; then ++set dummy grep ggrep; ac_prog_name=$2 + if test "${ac_cv_path_GREP+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test -z "$GREP"; then + ac_path_GREP_found=false +- # Loop through the user's path and test for each of PROGNAME-LIST +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++# Loop through the user's path and test for each of PROGNAME-LIST ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do +- for ac_exec_ext in '' $ac_executable_extensions; do +- ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" +- { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue +-# Check for GNU ac_path_GREP and select it if it is found. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue ++ # Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP + case `"$ac_path_GREP" --version 2>&1` in + *GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; + *) + ac_count=0 +- $as_echo_n 0123456789 >"conftest.in" ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" +- $as_echo 'GREP' >> "conftest.nl" ++ echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` +@@ -5336,60 +5174,74 @@ + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; + esac + +- $ac_path_GREP_found && break 3 +- done ++ ++ $ac_path_GREP_found && break 3 + done + done ++ ++done + IFS=$as_save_IFS +- if test -z "$ac_cv_path_GREP"; then +- { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +-$as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} ++ ++ ++fi ++ ++GREP="$ac_cv_path_GREP" ++if test -z "$GREP"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } +- fi ++fi ++ + else + ac_cv_path_GREP=$GREP + fi + ++ + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 +-$as_echo "$ac_cv_path_GREP" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 ++echo "${ECHO_T}$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + + +-{ $as_echo "$as_me:$LINENO: checking for egrep" >&5 +-$as_echo_n "checking for egrep... " >&6; } ++{ echo "$as_me:$LINENO: checking for egrep" >&5 ++echo $ECHO_N "checking for egrep... $ECHO_C" >&6; } + if test "${ac_cv_path_EGREP+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else +- if test -z "$EGREP"; then ++ # Extract the first word of "egrep" to use in msg output ++if test -z "$EGREP"; then ++set dummy egrep; ac_prog_name=$2 ++if test "${ac_cv_path_EGREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else + ac_path_EGREP_found=false +- # Loop through the user's path and test for each of PROGNAME-LIST +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++# Loop through the user's path and test for each of PROGNAME-LIST ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do +- for ac_exec_ext in '' $ac_executable_extensions; do +- ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" +- { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue +-# Check for GNU ac_path_EGREP and select it if it is found. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue ++ # Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP + case `"$ac_path_EGREP" --version 2>&1` in + *GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; + *) + ac_count=0 +- $as_echo_n 0123456789 >"conftest.in" ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" +- $as_echo 'EGREP' >> "conftest.nl" ++ echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` +@@ -5404,31 +5256,40 @@ + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; + esac + +- $ac_path_EGREP_found && break 3 +- done ++ ++ $ac_path_EGREP_found && break 3 + done + done ++ ++done + IFS=$as_save_IFS +- if test -z "$ac_cv_path_EGREP"; then +- { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +-$as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} ++ ++ ++fi ++ ++EGREP="$ac_cv_path_EGREP" ++if test -z "$EGREP"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } +- fi ++fi ++ + else + ac_cv_path_EGREP=$EGREP + fi + ++ + fi + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 +-$as_echo "$ac_cv_path_EGREP" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 ++echo "${ECHO_T}$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + + +-{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +-$as_echo_n "checking for ANSI C header files... " >&6; } ++{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5 ++echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } + if test "${ac_cv_header_stdc+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -5455,21 +5316,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_header_stdc=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_header_stdc=no +@@ -5561,40 +5421,37 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : + else +- $as_echo "$as_me: program exited with status $ac_status" >&5 +-$as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: program exited with status $ac_status" >&5 ++echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ( exit $ac_status ) + ac_cv_header_stdc=no + fi +-rm -rf conftest.dSYM + rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi + + + fi + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +-$as_echo "$ac_cv_header_stdc" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 ++echo "${ECHO_T}$ac_cv_header_stdc" >&6; } + if test $ac_cv_header_stdc = yes; then + + cat >>confdefs.h <<\_ACEOF +@@ -5677,34 +5534,34 @@ + + # Make sure we can run config.sub. + $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || +- { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 +-$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} ++ { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 ++echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} + { (exit 1); exit 1; }; } + +-{ $as_echo "$as_me:$LINENO: checking build system type" >&5 +-$as_echo_n "checking build system type... " >&6; } ++{ echo "$as_me:$LINENO: checking build system type" >&5 ++echo $ECHO_N "checking build system type... $ECHO_C" >&6; } + if test "${ac_cv_build+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_build_alias=$build_alias + test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` + test "x$ac_build_alias" = x && +- { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 +-$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;} ++ { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 ++echo "$as_me: error: cannot guess build type; you must specify one" >&2;} + { (exit 1); exit 1; }; } + ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || +- { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 +-$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} + { (exit 1); exit 1; }; } + + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +-$as_echo "$ac_cv_build" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5 ++echo "${ECHO_T}$ac_cv_build" >&6; } + case $ac_cv_build in + *-*-*) ;; +-*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 +-$as_echo "$as_me: error: invalid value of canonical build" >&2;} ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 ++echo "$as_me: error: invalid value of canonical build" >&2;} + { (exit 1); exit 1; }; };; + esac + build=$ac_cv_build +@@ -5721,27 +5578,27 @@ + case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +-{ $as_echo "$as_me:$LINENO: checking host system type" >&5 +-$as_echo_n "checking host system type... " >&6; } ++{ echo "$as_me:$LINENO: checking host system type" >&5 ++echo $ECHO_N "checking host system type... $ECHO_C" >&6; } + if test "${ac_cv_host+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build + else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || +- { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 +-$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} + { (exit 1); exit 1; }; } + fi + + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +-$as_echo "$ac_cv_host" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5 ++echo "${ECHO_T}$ac_cv_host" >&6; } + case $ac_cv_host in + *-*-*) ;; +-*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 +-$as_echo "$as_me: error: invalid value of canonical host" >&2;} ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 ++echo "$as_me: error: invalid value of canonical host" >&2;} + { (exit 1); exit 1; }; };; + esac + host=$ac_cv_host +@@ -5758,10 +5615,10 @@ + case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + +-{ $as_echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 +-$as_echo_n "checking for a sed that does not truncate output... " >&6; } ++{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 ++echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; } + if test "${lt_cv_path_SED+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + # Loop through the user's path and test for sed and gsed. + # Then use that list of sed's as ones to test for truncation. +@@ -5814,8 +5671,8 @@ + + SED=$lt_cv_path_SED + +-{ $as_echo "$as_me:$LINENO: result: $SED" >&5 +-$as_echo "$SED" >&6; } ++{ echo "$as_me:$LINENO: result: $SED" >&5 ++echo "${ECHO_T}$SED" >&6; } + + + # Check whether --with-gnu-ld was given. +@@ -5828,8 +5685,8 @@ + ac_prog=ld + if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. +- { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5 +-$as_echo_n "checking for ld used by $CC... " >&6; } ++ { echo "$as_me:$LINENO: checking for ld used by $CC" >&5 ++echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw +@@ -5858,14 +5715,14 @@ + ;; + esac + elif test "$with_gnu_ld" = yes; then +- { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5 +-$as_echo_n "checking for GNU ld... " >&6; } ++ { echo "$as_me:$LINENO: checking for GNU ld" >&5 ++echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; } + else +- { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5 +-$as_echo_n "checking for non-GNU ld... " >&6; } ++ { echo "$as_me:$LINENO: checking for non-GNU ld" >&5 ++echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; } + fi + if test "${lt_cv_path_LD+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +@@ -5895,19 +5752,19 @@ + + LD="$lt_cv_path_LD" + if test -n "$LD"; then +- { $as_echo "$as_me:$LINENO: result: $LD" >&5 +-$as_echo "$LD" >&6; } ++ { echo "$as_me:$LINENO: result: $LD" >&5 ++echo "${ECHO_T}$LD" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi +-test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 +-$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} ++test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 ++echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} + { (exit 1); exit 1; }; } +-{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 +-$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } ++{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 ++echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; } + if test "${lt_cv_prog_gnu_ld+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + # I'd rather use --version here, but apparently some GNU lds only accept -v. + case `$LD -v 2>&1 &5 +-$as_echo "$lt_cv_prog_gnu_ld" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 ++echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; } + with_gnu_ld=$lt_cv_prog_gnu_ld + + +-{ $as_echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 +-$as_echo_n "checking for $LD option to reload object files... " >&6; } ++{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 ++echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; } + if test "${lt_cv_ld_reload_flag+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_ld_reload_flag='-r' + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 +-$as_echo "$lt_cv_ld_reload_flag" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 ++echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; } + reload_flag=$lt_cv_ld_reload_flag + case $reload_flag in + "" | " "*) ;; +@@ -5949,10 +5806,10 @@ + ;; + esac + +-{ $as_echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 +-$as_echo_n "checking for BSD-compatible nm... " >&6; } ++{ echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 ++echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6; } + if test "${lt_cv_path_NM+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$NM"; then + # Let the user override the test. +@@ -5998,25 +5855,25 @@ + test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm + fi + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 +-$as_echo "$lt_cv_path_NM" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 ++echo "${ECHO_T}$lt_cv_path_NM" >&6; } + NM="$lt_cv_path_NM" + +-{ $as_echo "$as_me:$LINENO: checking whether ln -s works" >&5 +-$as_echo_n "checking whether ln -s works... " >&6; } ++{ echo "$as_me:$LINENO: checking whether ln -s works" >&5 ++echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; } + LN_S=$as_ln_s + if test "$LN_S" = "ln -s"; then +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no, using $LN_S" >&5 +-$as_echo "no, using $LN_S" >&6; } ++ { echo "$as_me:$LINENO: result: no, using $LN_S" >&5 ++echo "${ECHO_T}no, using $LN_S" >&6; } + fi + +-{ $as_echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 +-$as_echo_n "checking how to recognize dependent libraries... " >&6; } ++{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 ++echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; } + if test "${lt_cv_deplibs_check_method+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_file_magic_cmd='$MAGIC_CMD' + lt_cv_file_magic_test_file= +@@ -6128,7 +5985,7 @@ + lt_cv_deplibs_check_method=pass_all + ;; + +-netbsd*) ++netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + else +@@ -6199,8 +6056,8 @@ + esac + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 +-$as_echo "$lt_cv_deplibs_check_method" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 ++echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; } + file_magic_cmd=$lt_cv_file_magic_cmd + deplibs_check_method=$lt_cv_deplibs_check_method + test -z "$deplibs_check_method" && deplibs_check_method=unknown +@@ -6233,7 +6090,7 @@ + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) +@@ -6248,11 +6105,11 @@ + ;; + *-*-irix6*) + # Find out which ABI we are using. +- echo '#line 6251 "configure"' > conftest.$ac_ext ++ echo '#line 6108 "configure"' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in +@@ -6290,7 +6147,7 @@ + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + case `/usr/bin/file conftest.o` in + *32-bit*) +@@ -6313,7 +6170,6 @@ + esac + ;; + *64-bit*) +- libsuff=64 + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" +@@ -6341,10 +6197,10 @@ + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" +- { $as_echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 +-$as_echo_n "checking whether the C compiler needs -belf... " >&6; } ++ { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 ++echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; } + if test "${lt_cv_cc_needs_belf+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' +@@ -6373,30 +6229,26 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + lt_cv_cc_needs_belf=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + lt_cv_cc_needs_belf=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + ac_ext=c +@@ -6406,8 +6258,8 @@ + ac_compiler_gnu=$ac_cv_c_compiler_gnu + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 +-$as_echo "$lt_cv_cc_needs_belf" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 ++echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; } + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" +@@ -6419,7 +6271,7 @@ + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + case `/usr/bin/file conftest.o` in + *64-bit*) +@@ -6456,11 +6308,11 @@ + for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h + do +-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +-$as_echo_n "checking for $ac_header... " >&6; } ++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } + if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -6478,21 +6330,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + eval "$as_ac_Header=yes" + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_Header=no" +@@ -6500,14 +6351,12 @@ + + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-ac_res=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } +-if test `eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` = yes; then ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 + _ACEOF + + fi +@@ -6518,21 +6367,20 @@ + + for ac_header in dlfcn.h + do +-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` + if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +-$as_echo_n "checking for $ac_header... " >&6; } ++ { echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } + if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-ac_res=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + else + # Is the header compilable? +-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-$as_echo_n "checking $ac_header usability... " >&6; } ++{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 ++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -6548,33 +6396,32 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_header_compiler=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_compiler=no + fi + + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-$as_echo "$ac_header_compiler" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-$as_echo_n "checking $ac_header presence... " >&6; } ++{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 ++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -6588,52 +6435,51 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + ac_header_preproc=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no + fi + + rm -f conftest.err conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-$as_echo "$ac_header_preproc" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 ++echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 ++echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +-$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +-$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 ++echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 ++echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 ++echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 ++echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 ++echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 ++echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( cat <<\_ASBOX + ## ----------------------------------------------------------------------------------- ## + ## Report this to http://bugzilla.gnome.org/enter_bug.cgi?product=gnome-control-center ## +@@ -6642,23 +6488,21 @@ + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; + esac +-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +-$as_echo_n "checking for $ac_header... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } + if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + eval "$as_ac_Header=\$ac_header_preproc" + fi +-ac_res=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + + fi +-if test `eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` = yes; then ++if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 + _ACEOF + + fi +@@ -6679,10 +6523,10 @@ + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. + set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CXX+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$CXX"; then + ac_cv_prog_CXX="$CXX" # Let the user override the test. +@@ -6695,7 +6539,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -6706,11 +6550,11 @@ + fi + CXX=$ac_cv_prog_CXX + if test -n "$CXX"; then +- { $as_echo "$as_me:$LINENO: result: $CXX" >&5 +-$as_echo "$CXX" >&6; } ++ { echo "$as_me:$LINENO: result: $CXX" >&5 ++echo "${ECHO_T}$CXX" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -6723,10 +6567,10 @@ + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$ac_ct_CXX"; then + ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. +@@ -6739,7 +6583,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CXX="$ac_prog" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -6750,11 +6594,11 @@ + fi + ac_ct_CXX=$ac_cv_prog_ac_ct_CXX + if test -n "$ac_ct_CXX"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 +-$as_echo "$ac_ct_CXX" >&6; } ++ { echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 ++echo "${ECHO_T}$ac_ct_CXX" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -6766,10 +6610,10 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&5 +-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&2;} + ac_tool_warned=yes ;; +@@ -6781,47 +6625,43 @@ + fi + fi + # Provide some information about the compiler. +-$as_echo "$as_me:$LINENO: checking for C++ compiler version" >&5 +-set X $ac_compile +-ac_compiler=$2 ++echo "$as_me:$LINENO: checking for C++ compiler version" >&5 ++ac_compiler=`set X $ac_compile; echo $2` + { (ac_try="$ac_compiler --version >&5" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + { (ac_try="$ac_compiler -v >&5" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + { (ac_try="$ac_compiler -V >&5" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 +-$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } ++{ echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 ++echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6; } + if test "${ac_cv_cxx_compiler_gnu+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -6847,21 +6687,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_compiler_gnu=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_compiler_gnu=no +@@ -6871,19 +6710,15 @@ + ac_cv_cxx_compiler_gnu=$ac_compiler_gnu + + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 +-$as_echo "$ac_cv_cxx_compiler_gnu" >&6; } +-if test $ac_compiler_gnu = yes; then +- GXX=yes +-else +- GXX= +-fi ++{ echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 ++echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6; } ++GXX=`test $ac_compiler_gnu = yes && echo yes` + ac_test_CXXFLAGS=${CXXFLAGS+set} + ac_save_CXXFLAGS=$CXXFLAGS +-{ $as_echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 +-$as_echo_n "checking whether $CXX accepts -g... " >&6; } ++{ echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 ++echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6; } + if test "${ac_cv_prog_cxx_g+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_save_cxx_werror_flag=$ac_cxx_werror_flag + ac_cxx_werror_flag=yes +@@ -6910,21 +6745,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cxx_g=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + CXXFLAGS="" +@@ -6949,21 +6783,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + : + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cxx_werror_flag=$ac_save_cxx_werror_flag +@@ -6989,21 +6822,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cxx_g=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + +@@ -7018,8 +6850,8 @@ + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cxx_werror_flag=$ac_save_cxx_werror_flag + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 +-$as_echo "$ac_cv_prog_cxx_g" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 ++echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6; } + if test "$ac_test_CXXFLAGS" = set; then + CXXFLAGS=$ac_save_CXXFLAGS + elif test $ac_cv_prog_cxx_g = yes; then +@@ -7043,10 +6875,10 @@ + + depcc="$CXX" am_compiler_list= + +-{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +-$as_echo_n "checking dependency style of $depcc... " >&6; } ++{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 ++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } + if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up +@@ -7134,8 +6966,8 @@ + fi + + fi +-{ $as_echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 +-$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } ++{ echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 ++echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6; } + CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type + + if +@@ -7159,11 +6991,11 @@ + ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +-{ $as_echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 +-$as_echo_n "checking how to run the C++ preprocessor... " >&6; } ++{ echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 ++echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6; } + if test -z "$CXXCPP"; then + if test "${ac_cv_prog_CXXCPP+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + # Double quotes because CXXCPP needs to be expanded + for CXXCPP in "$CXX -E" "/lib/cpp" +@@ -7195,21 +7027,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || + test ! -s conftest.err + }; then + : + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +@@ -7233,14 +7064,13 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || + test ! -s conftest.err +@@ -7248,7 +7078,7 @@ + # Broken: success on invalid input. + continue + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +@@ -7273,8 +7103,8 @@ + else + ac_cv_prog_CXXCPP=$CXXCPP + fi +-{ $as_echo "$as_me:$LINENO: result: $CXXCPP" >&5 +-$as_echo "$CXXCPP" >&6; } ++{ echo "$as_me:$LINENO: result: $CXXCPP" >&5 ++echo "${ECHO_T}$CXXCPP" >&6; } + ac_preproc_ok=false + for ac_cxx_preproc_warn_flag in '' yes + do +@@ -7302,21 +7132,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || + test ! -s conftest.err + }; then + : + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +@@ -7340,14 +7169,13 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || + test ! -s conftest.err +@@ -7355,7 +7183,7 @@ + # Broken: success on invalid input. + continue + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +@@ -7371,9 +7199,9 @@ + if $ac_preproc_ok; then + : + else +- { { $as_echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check ++ { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check ++echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check + See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + fi +@@ -7396,10 +7224,10 @@ + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. + set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_F77+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$F77"; then + ac_cv_prog_F77="$F77" # Let the user override the test. +@@ -7412,7 +7240,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_F77="$ac_tool_prefix$ac_prog" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -7423,11 +7251,11 @@ + fi + F77=$ac_cv_prog_F77 + if test -n "$F77"; then +- { $as_echo "$as_me:$LINENO: result: $F77" >&5 +-$as_echo "$F77" >&6; } ++ { echo "$as_me:$LINENO: result: $F77" >&5 ++echo "${ECHO_T}$F77" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -7440,10 +7268,10 @@ + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_F77+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$ac_ct_F77"; then + ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test. +@@ -7456,7 +7284,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_F77="$ac_prog" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -7467,11 +7295,11 @@ + fi + ac_ct_F77=$ac_cv_prog_ac_ct_F77 + if test -n "$ac_ct_F77"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_F77" >&5 +-$as_echo "$ac_ct_F77" >&6; } ++ { echo "$as_me:$LINENO: result: $ac_ct_F77" >&5 ++echo "${ECHO_T}$ac_ct_F77" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -7483,10 +7311,10 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&5 +-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&2;} + ac_tool_warned=yes ;; +@@ -7497,41 +7325,37 @@ + + + # Provide some information about the compiler. +-$as_echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5 +-set X $ac_compile +-ac_compiler=$2 ++echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5 ++ac_compiler=`set X $ac_compile; echo $2` + { (ac_try="$ac_compiler --version >&5" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + { (ac_try="$ac_compiler -v >&5" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + { (ac_try="$ac_compiler -V >&5" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + rm -f a.out + +@@ -7539,10 +7363,10 @@ + # input file. (Note that this only needs to work for GNU compilers.) + ac_save_ext=$ac_ext + ac_ext=F +-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5 +-$as_echo_n "checking whether we are using the GNU Fortran 77 compiler... " >&6; } ++{ echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5 ++echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6; } + if test "${ac_cv_f77_compiler_gnu+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + program main +@@ -7558,21 +7382,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_f77_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_compiler_gnu=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_compiler_gnu=no +@@ -7582,16 +7405,16 @@ + ac_cv_f77_compiler_gnu=$ac_compiler_gnu + + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5 +-$as_echo "$ac_cv_f77_compiler_gnu" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5 ++echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6; } + ac_ext=$ac_save_ext + ac_test_FFLAGS=${FFLAGS+set} + ac_save_FFLAGS=$FFLAGS + FFLAGS= +-{ $as_echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5 +-$as_echo_n "checking whether $F77 accepts -g... " >&6; } ++{ echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5 ++echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6; } + if test "${ac_cv_prog_f77_g+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + FFLAGS=-g + cat >conftest.$ac_ext <<_ACEOF +@@ -7605,21 +7428,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_f77_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_f77_g=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_prog_f77_g=no +@@ -7628,8 +7450,8 @@ + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5 +-$as_echo "$ac_cv_prog_f77_g" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5 ++echo "${ECHO_T}$ac_cv_prog_f77_g" >&6; } + if test "$ac_test_FFLAGS" = set; then + FFLAGS=$ac_save_FFLAGS + elif test $ac_cv_prog_f77_g = yes; then +@@ -7646,11 +7468,7 @@ + fi + fi + +-if test $ac_compiler_gnu = yes; then +- G77=yes +-else +- G77= +-fi ++G77=`test $ac_compiler_gnu = yes && echo yes` + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +@@ -7661,10 +7479,10 @@ + + # Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! + # find the maximum length of command line arguments +-{ $as_echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 +-$as_echo_n "checking the maximum length of command line arguments... " >&6; } ++{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 ++echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; } + if test "${lt_cv_sys_max_cmd_len+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + i=0 + teststring="ABCD" +@@ -7773,11 +7591,11 @@ + fi + + if test -n $lt_cv_sys_max_cmd_len ; then +- { $as_echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 +-$as_echo "$lt_cv_sys_max_cmd_len" >&6; } ++ { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 ++echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: none" >&5 +-$as_echo "none" >&6; } ++ { echo "$as_me:$LINENO: result: none" >&5 ++echo "${ECHO_T}none" >&6; } + fi + + +@@ -7785,10 +7603,10 @@ + + + # Check for command to grab the raw symbol name followed by C symbol from nm. +-{ $as_echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 +-$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } ++{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 ++echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; } + if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + + # These are sane defaults that work on at least a few old systems. +@@ -7893,14 +7711,14 @@ + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Now try to grab the symbols. + nlist=conftest.nm + if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 + (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then +@@ -7955,7 +7773,7 @@ + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext}; then + pipe_works=yes + fi +@@ -7990,17 +7808,17 @@ + lt_cv_sys_global_symbol_to_cdecl= + fi + if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then +- { $as_echo "$as_me:$LINENO: result: failed" >&5 +-$as_echo "failed" >&6; } ++ { echo "$as_me:$LINENO: result: failed" >&5 ++echo "${ECHO_T}failed" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: ok" >&5 +-$as_echo "ok" >&6; } ++ { echo "$as_me:$LINENO: result: ok" >&5 ++echo "${ECHO_T}ok" >&6; } + fi + +-{ $as_echo "$as_me:$LINENO: checking for objdir" >&5 +-$as_echo_n "checking for objdir... " >&6; } ++{ echo "$as_me:$LINENO: checking for objdir" >&5 ++echo $ECHO_N "checking for objdir... $ECHO_C" >&6; } + if test "${lt_cv_objdir+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + rm -f .libs 2>/dev/null + mkdir .libs 2>/dev/null +@@ -8012,8 +7830,8 @@ + fi + rmdir .libs 2>/dev/null + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 +-$as_echo "$lt_cv_objdir" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 ++echo "${ECHO_T}$lt_cv_objdir" >&6; } + objdir=$lt_cv_objdir + + +@@ -8064,10 +7882,10 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. + set dummy ${ac_tool_prefix}ar; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_AR+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +@@ -8080,7 +7898,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AR="${ac_tool_prefix}ar" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -8091,11 +7909,11 @@ + fi + AR=$ac_cv_prog_AR + if test -n "$AR"; then +- { $as_echo "$as_me:$LINENO: result: $AR" >&5 +-$as_echo "$AR" >&6; } ++ { echo "$as_me:$LINENO: result: $AR" >&5 ++echo "${ECHO_T}$AR" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -8104,10 +7922,10 @@ + ac_ct_AR=$AR + # Extract the first word of "ar", so it can be a program name with args. + set dummy ar; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_AR+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +@@ -8120,7 +7938,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_AR="ar" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -8131,11 +7949,11 @@ + fi + ac_ct_AR=$ac_cv_prog_ac_ct_AR + if test -n "$ac_ct_AR"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 +-$as_echo "$ac_ct_AR" >&6; } ++ { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 ++echo "${ECHO_T}$ac_ct_AR" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + if test "x$ac_ct_AR" = x; then +@@ -8143,10 +7961,10 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&5 +-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&2;} + ac_tool_warned=yes ;; +@@ -8160,10 +7978,10 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. + set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_RANLIB+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +@@ -8176,7 +7994,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -8187,11 +8005,11 @@ + fi + RANLIB=$ac_cv_prog_RANLIB + if test -n "$RANLIB"; then +- { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5 +-$as_echo "$RANLIB" >&6; } ++ { echo "$as_me:$LINENO: result: $RANLIB" >&5 ++echo "${ECHO_T}$RANLIB" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -8200,10 +8018,10 @@ + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. + set dummy ranlib; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +@@ -8216,7 +8034,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_RANLIB="ranlib" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -8227,11 +8045,11 @@ + fi + ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB + if test -n "$ac_ct_RANLIB"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +-$as_echo "$ac_ct_RANLIB" >&6; } ++ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 ++echo "${ECHO_T}$ac_ct_RANLIB" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + if test "x$ac_ct_RANLIB" = x; then +@@ -8239,10 +8057,10 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&5 +-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&2;} + ac_tool_warned=yes ;; +@@ -8256,10 +8074,10 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. + set dummy ${ac_tool_prefix}strip; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_STRIP+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +@@ -8272,7 +8090,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -8283,11 +8101,11 @@ + fi + STRIP=$ac_cv_prog_STRIP + if test -n "$STRIP"; then +- { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 +-$as_echo "$STRIP" >&6; } ++ { echo "$as_me:$LINENO: result: $STRIP" >&5 ++echo "${ECHO_T}$STRIP" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -8296,10 +8114,10 @@ + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. + set dummy strip; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +@@ -8312,7 +8130,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -8323,11 +8141,11 @@ + fi + ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP + if test -n "$ac_ct_STRIP"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +-$as_echo "$ac_ct_STRIP" >&6; } ++ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 ++echo "${ECHO_T}$ac_ct_STRIP" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + if test "x$ac_ct_STRIP" = x; then +@@ -8335,10 +8153,10 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&5 +-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&2;} + ac_tool_warned=yes ;; +@@ -8403,10 +8221,10 @@ + case $deplibs_check_method in + file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then +- { $as_echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 +-$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } ++ { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 ++echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; } + if test "${lt_cv_path_MAGIC_CMD+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + case $MAGIC_CMD in + [\\/*] | ?:[\\/]*) +@@ -8456,19 +8274,19 @@ + + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if test -n "$MAGIC_CMD"; then +- { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +-$as_echo "$MAGIC_CMD" >&6; } ++ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 ++echo "${ECHO_T}$MAGIC_CMD" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then +- { $as_echo "$as_me:$LINENO: checking for file" >&5 +-$as_echo_n "checking for file... " >&6; } ++ { echo "$as_me:$LINENO: checking for file" >&5 ++echo $ECHO_N "checking for file... $ECHO_C" >&6; } + if test "${lt_cv_path_MAGIC_CMD+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + case $MAGIC_CMD in + [\\/*] | ?:[\\/]*) +@@ -8518,11 +8336,11 @@ + + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if test -n "$MAGIC_CMD"; then +- { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +-$as_echo "$MAGIC_CMD" >&6; } ++ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 ++echo "${ECHO_T}$MAGIC_CMD" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + else +@@ -8540,10 +8358,10 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. + set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_DSYMUTIL+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$DSYMUTIL"; then + ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. +@@ -8556,7 +8374,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -8567,11 +8385,11 @@ + fi + DSYMUTIL=$ac_cv_prog_DSYMUTIL + if test -n "$DSYMUTIL"; then +- { $as_echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 +-$as_echo "$DSYMUTIL" >&6; } ++ { echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 ++echo "${ECHO_T}$DSYMUTIL" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -8580,10 +8398,10 @@ + ac_ct_DSYMUTIL=$DSYMUTIL + # Extract the first word of "dsymutil", so it can be a program name with args. + set dummy dsymutil; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$ac_ct_DSYMUTIL"; then + ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. +@@ -8596,7 +8414,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -8607,11 +8425,11 @@ + fi + ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL + if test -n "$ac_ct_DSYMUTIL"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 +-$as_echo "$ac_ct_DSYMUTIL" >&6; } ++ { echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 ++echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + if test "x$ac_ct_DSYMUTIL" = x; then +@@ -8619,10 +8437,10 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&5 +-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&2;} + ac_tool_warned=yes ;; +@@ -8636,10 +8454,10 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. + set dummy ${ac_tool_prefix}nmedit; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_NMEDIT+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$NMEDIT"; then + ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. +@@ -8652,7 +8470,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -8663,11 +8481,11 @@ + fi + NMEDIT=$ac_cv_prog_NMEDIT + if test -n "$NMEDIT"; then +- { $as_echo "$as_me:$LINENO: result: $NMEDIT" >&5 +-$as_echo "$NMEDIT" >&6; } ++ { echo "$as_me:$LINENO: result: $NMEDIT" >&5 ++echo "${ECHO_T}$NMEDIT" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -8676,10 +8494,10 @@ + ac_ct_NMEDIT=$NMEDIT + # Extract the first word of "nmedit", so it can be a program name with args. + set dummy nmedit; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$ac_ct_NMEDIT"; then + ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. +@@ -8692,7 +8510,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_NMEDIT="nmedit" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -8703,11 +8521,11 @@ + fi + ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT + if test -n "$ac_ct_NMEDIT"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 +-$as_echo "$ac_ct_NMEDIT" >&6; } ++ { echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 ++echo "${ECHO_T}$ac_ct_NMEDIT" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + if test "x$ac_ct_NMEDIT" = x; then +@@ -8715,10 +8533,10 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&5 +-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&2;} + ac_tool_warned=yes ;; +@@ -8730,10 +8548,10 @@ + fi + + +- { $as_echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 +-$as_echo_n "checking for -single_module linker flag... " >&6; } ++ { echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 ++echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6; } + if test "${lt_cv_apple_cc_single_mod+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_apple_cc_single_mod=no + if test -z "${LT_MULTI_MODULE}"; then +@@ -8751,12 +8569,12 @@ + rm conftest.c + fi + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 +-$as_echo "$lt_cv_apple_cc_single_mod" >&6; } +- { $as_echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 +-$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } ++{ echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 ++echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6; } ++ { echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 ++echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6; } + if test "${lt_cv_ld_exported_symbols_list+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS +@@ -8783,37 +8601,33 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + lt_cv_ld_exported_symbols_list=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + lt_cv_ld_exported_symbols_list=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 +-$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 ++echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6; } + case $host_os in + rhapsody* | darwin1.[0123]) + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; +@@ -8925,10 +8739,10 @@ + lt_prog_compiler_no_builtin_flag=' -fno-builtin' + + +-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +-$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } ++{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 ++echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext +@@ -8943,11 +8757,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:8946: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:8760: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 +- echo "$as_me:8950: \$? = $ac_status" >&5 ++ echo "$as_me:8764: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. +@@ -8960,8 +8774,8 @@ + $rm conftest* + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +-$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; } + + if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then + lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" +@@ -8975,8 +8789,8 @@ + lt_prog_compiler_pic= + lt_prog_compiler_static= + +-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +-$as_echo_n "checking for $compiler option to produce PIC... " >&6; } ++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } + + if test "$GCC" = yes; then + lt_prog_compiler_wl='-Wl,' +@@ -9207,18 +9021,18 @@ + esac + fi + +-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 +-$as_echo "$lt_prog_compiler_pic" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic" >&6; } + + # + # Check to make sure the PIC flag actually works. + # + if test -n "$lt_prog_compiler_pic"; then + +-{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } ++{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_pic_works+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_prog_compiler_pic_works=no + ac_outfile=conftest.$ac_objext +@@ -9233,11 +9047,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:9236: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:9050: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 +- echo "$as_me:9240: \$? = $ac_status" >&5 ++ echo "$as_me:9054: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. +@@ -9250,8 +9064,8 @@ + $rm conftest* + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 +-$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6; } + + if test x"$lt_cv_prog_compiler_pic_works" = xyes; then + case $lt_prog_compiler_pic in +@@ -9278,10 +9092,10 @@ + # Check to make sure the static flag actually works. + # + wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" +-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } ++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_static_works+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_prog_compiler_static_works=no + save_LDFLAGS="$LDFLAGS" +@@ -9306,8 +9120,8 @@ + LDFLAGS="$save_LDFLAGS" + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 +-$as_echo "$lt_cv_prog_compiler_static_works" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6; } + + if test x"$lt_cv_prog_compiler_static_works" = xyes; then + : +@@ -9316,10 +9130,10 @@ + fi + + +-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } ++{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_c_o+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_prog_compiler_c_o=no + $rm -r conftest 2>/dev/null +@@ -9337,11 +9151,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:9340: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:9154: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 +- echo "$as_me:9344: \$? = $ac_status" >&5 ++ echo "$as_me:9158: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized +@@ -9363,34 +9177,34 @@ + $rm conftest* + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 +-$as_echo "$lt_cv_prog_compiler_c_o" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } + + + hard_links="nottested" + if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user +- { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +-$as_echo_n "checking if we can lock with hard links... " >&6; } ++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no +- { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 +-$as_echo "$hard_links" >&6; } ++ { echo "$as_me:$LINENO: result: $hard_links" >&5 ++echo "${ECHO_T}$hard_links" >&6; } + if test "$hard_links" = no; then +- { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} ++ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 ++echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi + else + need_locks=no + fi + +-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } ++{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } + + runpath_var= + allow_undefined_flag= +@@ -9602,12 +9416,13 @@ + $echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi ++ link_all_deplibs=no + else + ld_shlibs=no + fi + ;; + +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= +@@ -9820,21 +9635,18 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { +@@ -9849,13 +9661,12 @@ + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +@@ -9890,21 +9701,18 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { +@@ -9919,13 +9727,12 @@ + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +@@ -10158,7 +9965,7 @@ + link_all_deplibs=yes + ;; + +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else +@@ -10377,8 +10184,8 @@ + esac + fi + +-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs" >&5 +-$as_echo "$ld_shlibs" >&6; } ++{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5 ++echo "${ECHO_T}$ld_shlibs" >&6; } + test "$ld_shlibs" = no && can_build_shared=no + + # +@@ -10398,15 +10205,15 @@ + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. +- { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } ++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } + $rm conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } 2>conftest.err; then + soname=conftest + lib=conftest +@@ -10424,7 +10231,7 @@ + if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 + (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + then + archive_cmds_need_lc=no +@@ -10436,16 +10243,16 @@ + cat conftest.err 1>&5 + fi + $rm conftest* +- { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 +-$as_echo "$archive_cmds_need_lc" >&6; } ++ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 ++echo "${ECHO_T}$archive_cmds_need_lc" >&6; } + ;; + esac + fi + ;; + esac + +-{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +-$as_echo_n "checking dynamic linker characteristics... " >&6; } ++{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 ++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } + library_names_spec= + libname_spec='lib$name' + soname_spec= +@@ -10853,13 +10660,11 @@ + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes +- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" +- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on +@@ -10871,6 +10676,18 @@ + dynamic_linker='GNU/Linux ld.so' + ;; + ++netbsdelf*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='NetBSD ld.elf_so' ++ ;; ++ + netbsd*) + version_type=sunos + need_lib_prefix=no +@@ -11048,19 +10865,19 @@ + dynamic_linker=no + ;; + esac +-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +-$as_echo "$dynamic_linker" >&6; } ++{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 ++echo "${ECHO_T}$dynamic_linker" >&6; } + test "$dynamic_linker" = no && can_build_shared=no + + if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" + fi + + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" + if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" + fi +@@ -11072,8 +10889,8 @@ + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" + fi + +-{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +-$as_echo_n "checking how to hardcode library paths into programs... " >&6; } ++{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } + hardcode_action= + if test -n "$hardcode_libdir_flag_spec" || \ + test -n "$runpath_var" || \ +@@ -11097,8 +10914,8 @@ + # directories. + hardcode_action=unsupported + fi +-{ $as_echo "$as_me:$LINENO: result: $hardcode_action" >&5 +-$as_echo "$hardcode_action" >&6; } ++{ echo "$as_me:$LINENO: result: $hardcode_action" >&5 ++echo "${ECHO_T}$hardcode_action" >&6; } + + if test "$hardcode_action" = relink; then + # Fast installation is not supported +@@ -11111,13 +10928,13 @@ + + striplib= + old_striplib= +-{ $as_echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 +-$as_echo_n "checking whether stripping libraries is possible... " >&6; } ++{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 ++echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; } + if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + else + # FIXME - insert some real tests, host_os isn't really good enough + case $host_os in +@@ -11125,16 +10942,16 @@ + if test -n "$STRIP" ; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ;; + *) +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + ;; + esac + fi +@@ -11166,10 +10983,10 @@ + + darwin*) + # if libdl is installed we need to link against it +- { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +-$as_echo_n "checking for dlopen in -ldl... " >&6; } ++ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 ++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } + if test "${ac_cv_lib_dl_dlopen+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-ldl $LIBS" +@@ -11201,36 +11018,32 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_dl_dlopen=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dl_dlopen=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +-$as_echo "$ac_cv_lib_dl_dlopen" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } + if test $ac_cv_lib_dl_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" + else +@@ -11244,10 +11057,10 @@ + ;; + + *) +- { $as_echo "$as_me:$LINENO: checking for shl_load" >&5 +-$as_echo_n "checking for shl_load... " >&6; } ++ { echo "$as_me:$LINENO: checking for shl_load" >&5 ++echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; } + if test "${ac_cv_func_shl_load+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -11300,42 +11113,38 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_func_shl_load=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_func_shl_load=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 +-$as_echo "$ac_cv_func_shl_load" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 ++echo "${ECHO_T}$ac_cv_func_shl_load" >&6; } + if test $ac_cv_func_shl_load = yes; then + lt_cv_dlopen="shl_load" + else +- { $as_echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +-$as_echo_n "checking for shl_load in -ldld... " >&6; } ++ { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 ++echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; } + if test "${ac_cv_lib_dld_shl_load+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-ldld $LIBS" +@@ -11367,43 +11176,39 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_dld_shl_load=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dld_shl_load=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +-$as_echo "$ac_cv_lib_dld_shl_load" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 ++echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; } + if test $ac_cv_lib_dld_shl_load = yes; then + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" + else +- { $as_echo "$as_me:$LINENO: checking for dlopen" >&5 +-$as_echo_n "checking for dlopen... " >&6; } ++ { echo "$as_me:$LINENO: checking for dlopen" >&5 ++echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; } + if test "${ac_cv_func_dlopen+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -11456,42 +11261,38 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_func_dlopen=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_func_dlopen=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 +-$as_echo "$ac_cv_func_dlopen" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_func_dlopen" >&6; } + if test $ac_cv_func_dlopen = yes; then + lt_cv_dlopen="dlopen" + else +- { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +-$as_echo_n "checking for dlopen in -ldl... " >&6; } ++ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 ++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } + if test "${ac_cv_lib_dl_dlopen+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-ldl $LIBS" +@@ -11523,43 +11324,39 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_dl_dlopen=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dl_dlopen=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +-$as_echo "$ac_cv_lib_dl_dlopen" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } + if test $ac_cv_lib_dl_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" + else +- { $as_echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 +-$as_echo_n "checking for dlopen in -lsvld... " >&6; } ++ { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 ++echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; } + if test "${ac_cv_lib_svld_dlopen+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lsvld $LIBS" +@@ -11591,43 +11388,39 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_svld_dlopen=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_svld_dlopen=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 +-$as_echo "$ac_cv_lib_svld_dlopen" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; } + if test $ac_cv_lib_svld_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" + else +- { $as_echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 +-$as_echo_n "checking for dld_link in -ldld... " >&6; } ++ { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 ++echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; } + if test "${ac_cv_lib_dld_dld_link+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-ldld $LIBS" +@@ -11659,36 +11452,32 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_dld_dld_link=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dld_dld_link=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 +-$as_echo "$ac_cv_lib_dld_dld_link" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 ++echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; } + if test $ac_cv_lib_dld_dld_link = yes; then + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" + fi +@@ -11728,10 +11517,10 @@ + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + +- { $as_echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 +-$as_echo_n "checking whether a program can dlopen itself... " >&6; } ++ { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 ++echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; } + if test "${lt_cv_dlopen_self+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self=cross +@@ -11739,7 +11528,7 @@ + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <&5 + (eval $ac_link) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? +@@ -11823,15 +11612,15 @@ + + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 +-$as_echo "$lt_cv_dlopen_self" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 ++echo "${ECHO_T}$lt_cv_dlopen_self" >&6; } + + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" +- { $as_echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 +-$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } ++ { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 ++echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; } + if test "${lt_cv_dlopen_self_static+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self_static=cross +@@ -11839,7 +11628,7 @@ + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <&5 + (eval $ac_link) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? +@@ -11923,8 +11712,8 @@ + + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 +-$as_echo "$lt_cv_dlopen_self_static" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 ++echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; } + fi + + CPPFLAGS="$save_CPPFLAGS" +@@ -11946,13 +11735,13 @@ + + + # Report which library types will actually be built +-{ $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 +-$as_echo_n "checking if libtool supports shared libraries... " >&6; } +-{ $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5 +-$as_echo "$can_build_shared" >&6; } ++{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 ++echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; } ++{ echo "$as_me:$LINENO: result: $can_build_shared" >&5 ++echo "${ECHO_T}$can_build_shared" >&6; } + +-{ $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 +-$as_echo_n "checking whether to build shared libraries... " >&6; } ++{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 ++echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; } + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and +@@ -11972,15 +11761,15 @@ + fi + ;; + esac +-{ $as_echo "$as_me:$LINENO: result: $enable_shared" >&5 +-$as_echo "$enable_shared" >&6; } ++{ echo "$as_me:$LINENO: result: $enable_shared" >&5 ++echo "${ECHO_T}$enable_shared" >&6; } + +-{ $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5 +-$as_echo_n "checking whether to build static libraries... " >&6; } ++{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5 ++echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; } + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes +-{ $as_echo "$as_me:$LINENO: result: $enable_static" >&5 +-$as_echo "$enable_static" >&6; } ++{ echo "$as_me:$LINENO: result: $enable_static" >&5 ++echo "${ECHO_T}$enable_static" >&6; } + + # The else clause should only fire when bootstrapping the + # libtool distribution, otherwise you forgot to ship ltmain.sh +@@ -12073,8 +11862,8 @@ + cfgfile="${ofile}T" + trap "$rm \"$cfgfile\"; exit 1" 1 2 15 + $rm -f "$cfgfile" +- { $as_echo "$as_me:$LINENO: creating $ofile" >&5 +-$as_echo "$as_me: creating $ofile" >&6;} ++ { echo "$as_me:$LINENO: creating $ofile" >&5 ++echo "$as_me: creating $ofile" >&6;} + + cat <<__EOF__ >> "$cfgfile" + #! $SHELL +@@ -12486,18 +12275,18 @@ + + if test -f "$ltmain" && test -n "$tagnames"; then + if test ! -f "${ofile}"; then +- { $as_echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5 +-$as_echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;} ++ { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5 ++echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;} + fi + + if test -z "$LTCC"; then + eval "`$SHELL ${ofile} --config | grep '^LTCC='`" + if test -z "$LTCC"; then +- { $as_echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5 +-$as_echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;} ++ { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5 ++echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;} + else +- { $as_echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5 +-$as_echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;} ++ { echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5 ++echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;} + fi + fi + if test -z "$LTCFLAGS"; then +@@ -12514,16 +12303,16 @@ + # Check whether tagname contains only valid characters + case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in + "") ;; +- *) { { $as_echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5 +-$as_echo "$as_me: error: invalid tag name: $tagname" >&2;} ++ *) { { echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5 ++echo "$as_me: error: invalid tag name: $tagname" >&2;} + { (exit 1); exit 1; }; } + ;; + esac + + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null + then +- { { $as_echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5 +-$as_echo "$as_me: error: tag name \"$tagname\" already exists" >&2;} ++ { { echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5 ++echo "$as_me: error: tag name \"$tagname\" already exists" >&2;} + { (exit 1); exit 1; }; } + fi + +@@ -12666,8 +12455,8 @@ + ac_prog=ld + if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. +- { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5 +-$as_echo_n "checking for ld used by $CC... " >&6; } ++ { echo "$as_me:$LINENO: checking for ld used by $CC" >&5 ++echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw +@@ -12696,14 +12485,14 @@ + ;; + esac + elif test "$with_gnu_ld" = yes; then +- { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5 +-$as_echo_n "checking for GNU ld... " >&6; } ++ { echo "$as_me:$LINENO: checking for GNU ld" >&5 ++echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; } + else +- { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5 +-$as_echo_n "checking for non-GNU ld... " >&6; } ++ { echo "$as_me:$LINENO: checking for non-GNU ld" >&5 ++echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; } + fi + if test "${lt_cv_path_LD+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +@@ -12733,19 +12522,19 @@ + + LD="$lt_cv_path_LD" + if test -n "$LD"; then +- { $as_echo "$as_me:$LINENO: result: $LD" >&5 +-$as_echo "$LD" >&6; } ++ { echo "$as_me:$LINENO: result: $LD" >&5 ++echo "${ECHO_T}$LD" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi +-test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 +-$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} ++test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 ++echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} + { (exit 1); exit 1; }; } +-{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 +-$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } ++{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 ++echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; } + if test "${lt_cv_prog_gnu_ld+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + # I'd rather use --version here, but apparently some GNU lds only accept -v. + case `$LD -v 2>&1 &5 +-$as_echo "$lt_cv_prog_gnu_ld" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 ++echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; } + with_gnu_ld=$lt_cv_prog_gnu_ld + + +@@ -12808,8 +12597,8 @@ + fi + + # PORTME: fill in a description of your system's C++ link characteristics +-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } ++{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } + ld_shlibs_CXX=yes + case $host_os in + aix3*) +@@ -12926,21 +12715,18 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { +@@ -12955,13 +12741,12 @@ + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +@@ -12997,21 +12782,18 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { +@@ -13026,13 +12808,12 @@ + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +@@ -13435,7 +13216,7 @@ + ;; + esac + ;; +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= +@@ -13762,8 +13543,8 @@ + ld_shlibs_CXX=no + ;; + esac +-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 +-$as_echo "$ld_shlibs_CXX" >&6; } ++{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 ++echo "${ECHO_T}$ld_shlibs_CXX" >&6; } + test "$ld_shlibs_CXX" = no && can_build_shared=no + + GCC_CXX="$GXX" +@@ -13782,7 +13563,7 @@ + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Parse the compiler output and extract the necessary + # objects, libraries and library flags. +@@ -13938,8 +13719,8 @@ + lt_prog_compiler_pic_CXX= + lt_prog_compiler_static_CXX= + +-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +-$as_echo_n "checking for $compiler option to produce PIC... " >&6; } ++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } + + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then +@@ -14139,7 +13920,7 @@ + ;; + esac + ;; +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + ;; + osf3* | osf4* | osf5*) + case $cc_basename in +@@ -14222,18 +14003,18 @@ + esac + fi + +-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5 +-$as_echo "$lt_prog_compiler_pic_CXX" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6; } + + # + # Check to make sure the PIC flag actually works. + # + if test -n "$lt_prog_compiler_pic_CXX"; then + +-{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 +-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; } ++{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_pic_works_CXX+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_prog_compiler_pic_works_CXX=no + ac_outfile=conftest.$ac_objext +@@ -14248,11 +14029,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:14251: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:14032: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 +- echo "$as_me:14255: \$? = $ac_status" >&5 ++ echo "$as_me:14036: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. +@@ -14265,8 +14046,8 @@ + $rm conftest* + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_CXX" >&5 +-$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_CXX" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_pic_works_CXX" >&6; } + + if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then + case $lt_prog_compiler_pic_CXX in +@@ -14293,10 +14074,10 @@ + # Check to make sure the static flag actually works. + # + wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\" +-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } ++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_static_works_CXX+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_prog_compiler_static_works_CXX=no + save_LDFLAGS="$LDFLAGS" +@@ -14321,8 +14102,8 @@ + LDFLAGS="$save_LDFLAGS" + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_CXX" >&5 +-$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_CXX" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_static_works_CXX" >&6; } + + if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then + : +@@ -14331,10 +14112,10 @@ + fi + + +-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } ++{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_prog_compiler_c_o_CXX=no + $rm -r conftest 2>/dev/null +@@ -14352,11 +14133,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:14355: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:14136: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 +- echo "$as_me:14359: \$? = $ac_status" >&5 ++ echo "$as_me:14140: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized +@@ -14378,34 +14159,34 @@ + $rm conftest* + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5 +-$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6; } + + + hard_links="nottested" + if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user +- { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +-$as_echo_n "checking if we can lock with hard links... " >&6; } ++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no +- { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 +-$as_echo "$hard_links" >&6; } ++ { echo "$as_me:$LINENO: result: $hard_links" >&5 ++echo "${ECHO_T}$hard_links" >&6; } + if test "$hard_links" = no; then +- { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} ++ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 ++echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi + else + need_locks=no + fi + +-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } ++{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } + + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + case $host_os in +@@ -14424,14 +14205,17 @@ + cygwin* | mingw*) + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + ;; ++ linux* | k*bsd*-gnu) ++ link_all_deplibs_CXX=no ++ ;; + *) + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac + exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + +-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 +-$as_echo "$ld_shlibs_CXX" >&6; } ++{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 ++echo "${ECHO_T}$ld_shlibs_CXX" >&6; } + test "$ld_shlibs_CXX" = no && can_build_shared=no + + # +@@ -14451,15 +14235,15 @@ + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. +- { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } ++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } + $rm conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } 2>conftest.err; then + soname=conftest + lib=conftest +@@ -14477,7 +14261,7 @@ + if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 + (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + then + archive_cmds_need_lc_CXX=no +@@ -14489,16 +14273,16 @@ + cat conftest.err 1>&5 + fi + $rm conftest* +- { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5 +-$as_echo "$archive_cmds_need_lc_CXX" >&6; } ++ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5 ++echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6; } + ;; + esac + fi + ;; + esac + +-{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +-$as_echo_n "checking dynamic linker characteristics... " >&6; } ++{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 ++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } + library_names_spec= + libname_spec='lib$name' + soname_spec= +@@ -14854,13 +14638,11 @@ + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes +- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" +- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on +@@ -14872,6 +14654,18 @@ + dynamic_linker='GNU/Linux ld.so' + ;; + ++netbsdelf*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='NetBSD ld.elf_so' ++ ;; ++ + netbsd*) + version_type=sunos + need_lib_prefix=no +@@ -15049,19 +14843,19 @@ + dynamic_linker=no + ;; + esac +-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +-$as_echo "$dynamic_linker" >&6; } ++{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 ++echo "${ECHO_T}$dynamic_linker" >&6; } + test "$dynamic_linker" = no && can_build_shared=no + + if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" + fi + + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" + if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" + fi +@@ -15073,8 +14867,8 @@ + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" + fi + +-{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +-$as_echo_n "checking how to hardcode library paths into programs... " >&6; } ++{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } + hardcode_action_CXX= + if test -n "$hardcode_libdir_flag_spec_CXX" || \ + test -n "$runpath_var_CXX" || \ +@@ -15098,8 +14892,8 @@ + # directories. + hardcode_action_CXX=unsupported + fi +-{ $as_echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5 +-$as_echo "$hardcode_action_CXX" >&6; } ++{ echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5 ++echo "${ECHO_T}$hardcode_action_CXX" >&6; } + + if test "$hardcode_action_CXX" = relink; then + # Fast installation is not supported +@@ -15637,13 +15431,13 @@ + cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + + +-{ $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 +-$as_echo_n "checking if libtool supports shared libraries... " >&6; } +-{ $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5 +-$as_echo "$can_build_shared" >&6; } ++{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 ++echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; } ++{ echo "$as_me:$LINENO: result: $can_build_shared" >&5 ++echo "${ECHO_T}$can_build_shared" >&6; } + +-{ $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 +-$as_echo_n "checking whether to build shared libraries... " >&6; } ++{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 ++echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; } + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and +@@ -15662,15 +15456,15 @@ + fi + ;; + esac +-{ $as_echo "$as_me:$LINENO: result: $enable_shared" >&5 +-$as_echo "$enable_shared" >&6; } ++{ echo "$as_me:$LINENO: result: $enable_shared" >&5 ++echo "${ECHO_T}$enable_shared" >&6; } + +-{ $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5 +-$as_echo_n "checking whether to build static libraries... " >&6; } ++{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5 ++echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; } + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes +-{ $as_echo "$as_me:$LINENO: result: $enable_static" >&5 +-$as_echo "$enable_static" >&6; } ++{ echo "$as_me:$LINENO: result: $enable_static" >&5 ++echo "${ECHO_T}$enable_static" >&6; } + + GCC_F77="$G77" + LD_F77="$LD" +@@ -15679,8 +15473,8 @@ + lt_prog_compiler_pic_F77= + lt_prog_compiler_static_F77= + +-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +-$as_echo_n "checking for $compiler option to produce PIC... " >&6; } ++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } + + if test "$GCC" = yes; then + lt_prog_compiler_wl_F77='-Wl,' +@@ -15911,18 +15705,18 @@ + esac + fi + +-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5 +-$as_echo "$lt_prog_compiler_pic_F77" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6; } + + # + # Check to make sure the PIC flag actually works. + # + if test -n "$lt_prog_compiler_pic_F77"; then + +-{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5 +-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... " >&6; } ++{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_pic_works_F77+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_prog_compiler_pic_works_F77=no + ac_outfile=conftest.$ac_objext +@@ -15937,11 +15731,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:15940: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:15734: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 +- echo "$as_me:15944: \$? = $ac_status" >&5 ++ echo "$as_me:15738: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. +@@ -15954,8 +15748,8 @@ + $rm conftest* + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_F77" >&5 +-$as_echo "$lt_cv_prog_compiler_pic_works_F77" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_F77" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_pic_works_F77" >&6; } + + if test x"$lt_cv_prog_compiler_pic_works_F77" = xyes; then + case $lt_prog_compiler_pic_F77 in +@@ -15982,10 +15776,10 @@ + # Check to make sure the static flag actually works. + # + wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\" +-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } ++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_static_works_F77+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_prog_compiler_static_works_F77=no + save_LDFLAGS="$LDFLAGS" +@@ -16010,8 +15804,8 @@ + LDFLAGS="$save_LDFLAGS" + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_F77" >&5 +-$as_echo "$lt_cv_prog_compiler_static_works_F77" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_F77" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_static_works_F77" >&6; } + + if test x"$lt_cv_prog_compiler_static_works_F77" = xyes; then + : +@@ -16020,10 +15814,10 @@ + fi + + +-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } ++{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_prog_compiler_c_o_F77=no + $rm -r conftest 2>/dev/null +@@ -16041,11 +15835,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:16044: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:15838: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 +- echo "$as_me:16048: \$? = $ac_status" >&5 ++ echo "$as_me:15842: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized +@@ -16067,34 +15861,34 @@ + $rm conftest* + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5 +-$as_echo "$lt_cv_prog_compiler_c_o_F77" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6; } + + + hard_links="nottested" + if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user +- { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +-$as_echo_n "checking if we can lock with hard links... " >&6; } ++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no +- { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 +-$as_echo "$hard_links" >&6; } ++ { echo "$as_me:$LINENO: result: $hard_links" >&5 ++echo "${ECHO_T}$hard_links" >&6; } + if test "$hard_links" = no; then +- { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} ++ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 ++echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi + else + need_locks=no + fi + +-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } ++{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } + + runpath_var= + allow_undefined_flag_F77= +@@ -16306,12 +16100,13 @@ + $echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi ++ link_all_deplibs_F77=no + else + ld_shlibs_F77=no + fi + ;; + +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= +@@ -16514,21 +16309,18 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_f77_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { +@@ -16543,13 +16335,12 @@ + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +@@ -16574,21 +16365,18 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_f77_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { +@@ -16603,13 +16391,12 @@ + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +@@ -16842,7 +16629,7 @@ + link_all_deplibs_F77=yes + ;; + +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else +@@ -17061,8 +16848,8 @@ + esac + fi + +-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5 +-$as_echo "$ld_shlibs_F77" >&6; } ++{ echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5 ++echo "${ECHO_T}$ld_shlibs_F77" >&6; } + test "$ld_shlibs_F77" = no && can_build_shared=no + + # +@@ -17082,15 +16869,15 @@ + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. +- { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } ++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } + $rm conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } 2>conftest.err; then + soname=conftest + lib=conftest +@@ -17108,7 +16895,7 @@ + if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 + (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + then + archive_cmds_need_lc_F77=no +@@ -17120,16 +16907,16 @@ + cat conftest.err 1>&5 + fi + $rm conftest* +- { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5 +-$as_echo "$archive_cmds_need_lc_F77" >&6; } ++ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5 ++echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6; } + ;; + esac + fi + ;; + esac + +-{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +-$as_echo_n "checking dynamic linker characteristics... " >&6; } ++{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 ++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } + library_names_spec= + libname_spec='lib$name' + soname_spec= +@@ -17485,13 +17272,11 @@ + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes +- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" +- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on +@@ -17503,6 +17288,18 @@ + dynamic_linker='GNU/Linux ld.so' + ;; + ++netbsdelf*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='NetBSD ld.elf_so' ++ ;; ++ + netbsd*) + version_type=sunos + need_lib_prefix=no +@@ -17680,19 +17477,19 @@ + dynamic_linker=no + ;; + esac +-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +-$as_echo "$dynamic_linker" >&6; } ++{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 ++echo "${ECHO_T}$dynamic_linker" >&6; } + test "$dynamic_linker" = no && can_build_shared=no + + if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" + fi + + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" + if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" + fi +@@ -17704,8 +17501,8 @@ + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" + fi + +-{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +-$as_echo_n "checking how to hardcode library paths into programs... " >&6; } ++{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } + hardcode_action_F77= + if test -n "$hardcode_libdir_flag_spec_F77" || \ + test -n "$runpath_var_F77" || \ +@@ -17729,8 +17526,8 @@ + # directories. + hardcode_action_F77=unsupported + fi +-{ $as_echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5 +-$as_echo "$hardcode_action_F77" >&6; } ++{ echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5 ++echo "${ECHO_T}$hardcode_action_F77" >&6; } + + if test "$hardcode_action_F77" = relink; then + # Fast installation is not supported +@@ -18240,10 +18037,10 @@ + lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin' + + +-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +-$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } ++{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 ++echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext +@@ -18258,11 +18055,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:18261: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:18058: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 +- echo "$as_me:18265: \$? = $ac_status" >&5 ++ echo "$as_me:18062: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. +@@ -18275,8 +18072,8 @@ + $rm conftest* + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +-$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; } + + if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then + lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions" +@@ -18290,8 +18087,8 @@ + lt_prog_compiler_pic_GCJ= + lt_prog_compiler_static_GCJ= + +-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +-$as_echo_n "checking for $compiler option to produce PIC... " >&6; } ++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } + + if test "$GCC" = yes; then + lt_prog_compiler_wl_GCJ='-Wl,' +@@ -18522,18 +18319,18 @@ + esac + fi + +-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5 +-$as_echo "$lt_prog_compiler_pic_GCJ" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6; } + + # + # Check to make sure the PIC flag actually works. + # + if test -n "$lt_prog_compiler_pic_GCJ"; then + +-{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5 +-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... " >&6; } ++{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_pic_works_GCJ+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_prog_compiler_pic_works_GCJ=no + ac_outfile=conftest.$ac_objext +@@ -18548,11 +18345,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:18551: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:18348: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 +- echo "$as_me:18555: \$? = $ac_status" >&5 ++ echo "$as_me:18352: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. +@@ -18565,8 +18362,8 @@ + $rm conftest* + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_GCJ" >&5 +-$as_echo "$lt_cv_prog_compiler_pic_works_GCJ" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_GCJ" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_pic_works_GCJ" >&6; } + + if test x"$lt_cv_prog_compiler_pic_works_GCJ" = xyes; then + case $lt_prog_compiler_pic_GCJ in +@@ -18593,10 +18390,10 @@ + # Check to make sure the static flag actually works. + # + wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\" +-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } ++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_static_works_GCJ+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_prog_compiler_static_works_GCJ=no + save_LDFLAGS="$LDFLAGS" +@@ -18621,8 +18418,8 @@ + LDFLAGS="$save_LDFLAGS" + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_GCJ" >&5 +-$as_echo "$lt_cv_prog_compiler_static_works_GCJ" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_GCJ" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_static_works_GCJ" >&6; } + + if test x"$lt_cv_prog_compiler_static_works_GCJ" = xyes; then + : +@@ -18631,10 +18428,10 @@ + fi + + +-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } ++{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_prog_compiler_c_o_GCJ=no + $rm -r conftest 2>/dev/null +@@ -18652,11 +18449,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:18655: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:18452: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 +- echo "$as_me:18659: \$? = $ac_status" >&5 ++ echo "$as_me:18456: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized +@@ -18678,34 +18475,34 @@ + $rm conftest* + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5 +-$as_echo "$lt_cv_prog_compiler_c_o_GCJ" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6; } + + + hard_links="nottested" + if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user +- { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +-$as_echo_n "checking if we can lock with hard links... " >&6; } ++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no +- { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 +-$as_echo "$hard_links" >&6; } ++ { echo "$as_me:$LINENO: result: $hard_links" >&5 ++echo "${ECHO_T}$hard_links" >&6; } + if test "$hard_links" = no; then +- { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} ++ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 ++echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi + else + need_locks=no + fi + +-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } ++{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } + + runpath_var= + allow_undefined_flag_GCJ= +@@ -18917,12 +18714,13 @@ + $echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi ++ link_all_deplibs_GCJ=no + else + ld_shlibs_GCJ=no + fi + ;; + +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= +@@ -19135,21 +18933,18 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { +@@ -19164,13 +18959,12 @@ + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +@@ -19205,21 +18999,18 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { +@@ -19234,13 +19025,12 @@ + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +@@ -19473,7 +19263,7 @@ + link_all_deplibs_GCJ=yes + ;; + +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else +@@ -19692,8 +19482,8 @@ + esac + fi + +-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5 +-$as_echo "$ld_shlibs_GCJ" >&6; } ++{ echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5 ++echo "${ECHO_T}$ld_shlibs_GCJ" >&6; } + test "$ld_shlibs_GCJ" = no && can_build_shared=no + + # +@@ -19713,15 +19503,15 @@ + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. +- { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } ++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } + $rm conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } 2>conftest.err; then + soname=conftest + lib=conftest +@@ -19739,7 +19529,7 @@ + if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 + (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + then + archive_cmds_need_lc_GCJ=no +@@ -19751,16 +19541,16 @@ + cat conftest.err 1>&5 + fi + $rm conftest* +- { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5 +-$as_echo "$archive_cmds_need_lc_GCJ" >&6; } ++ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5 ++echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6; } + ;; + esac + fi + ;; + esac + +-{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +-$as_echo_n "checking dynamic linker characteristics... " >&6; } ++{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 ++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } + library_names_spec= + libname_spec='lib$name' + soname_spec= +@@ -20116,13 +19906,11 @@ + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes +- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" +- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on +@@ -20134,6 +19922,18 @@ + dynamic_linker='GNU/Linux ld.so' + ;; + ++netbsdelf*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='NetBSD ld.elf_so' ++ ;; ++ + netbsd*) + version_type=sunos + need_lib_prefix=no +@@ -20311,19 +20111,19 @@ + dynamic_linker=no + ;; + esac +-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +-$as_echo "$dynamic_linker" >&6; } ++{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 ++echo "${ECHO_T}$dynamic_linker" >&6; } + test "$dynamic_linker" = no && can_build_shared=no + + if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" + fi + + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" + if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" + fi +@@ -20335,8 +20135,8 @@ + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" + fi + +-{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +-$as_echo_n "checking how to hardcode library paths into programs... " >&6; } ++{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } + hardcode_action_GCJ= + if test -n "$hardcode_libdir_flag_spec_GCJ" || \ + test -n "$runpath_var_GCJ" || \ +@@ -20360,8 +20160,8 @@ + # directories. + hardcode_action_GCJ=unsupported + fi +-{ $as_echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5 +-$as_echo "$hardcode_action_GCJ" >&6; } ++{ echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5 ++echo "${ECHO_T}$hardcode_action_GCJ" >&6; } + + if test "$hardcode_action_GCJ" = relink; then + # Fast installation is not supported +@@ -21284,8 +21084,8 @@ + ;; + + *) +- { { $as_echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5 +-$as_echo "$as_me: error: Unsupported tag name: $tagname" >&2;} ++ { { echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5 ++echo "$as_me: error: Unsupported tag name: $tagname" >&2;} + { (exit 1); exit 1; }; } + ;; + esac +@@ -21304,8 +21104,8 @@ + chmod +x "$ofile" + else + rm -f "${ofile}T" +- { { $as_echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5 +-$as_echo "$as_me: error: unable to update list of available tagged configurations." >&2;} ++ { { echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5 ++echo "$as_me: error: unable to update list of available tagged configurations." >&2;} + { (exit 1); exit 1; }; } + fi + fi +@@ -21347,10 +21147,10 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. + set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_PKG_CONFIG+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + case $PKG_CONFIG in + [\\/]* | ?:[\\/]*) +@@ -21365,7 +21165,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -21377,11 +21177,11 @@ + fi + PKG_CONFIG=$ac_cv_path_PKG_CONFIG + if test -n "$PKG_CONFIG"; then +- { $as_echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5 +-$as_echo "$PKG_CONFIG" >&6; } ++ { echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5 ++echo "${ECHO_T}$PKG_CONFIG" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -21390,10 +21190,10 @@ + ac_pt_PKG_CONFIG=$PKG_CONFIG + # Extract the first word of "pkg-config", so it can be a program name with args. + set dummy pkg-config; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + case $ac_pt_PKG_CONFIG in + [\\/]* | ?:[\\/]*) +@@ -21408,7 +21208,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -21420,11 +21220,11 @@ + fi + ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG + if test -n "$ac_pt_PKG_CONFIG"; then +- { $as_echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5 +-$as_echo "$ac_pt_PKG_CONFIG" >&6; } ++ { echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5 ++echo "${ECHO_T}$ac_pt_PKG_CONFIG" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + if test "x$ac_pt_PKG_CONFIG" = x; then +@@ -21432,10 +21232,10 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&5 +-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&2;} + ac_tool_warned=yes ;; +@@ -21449,14 +21249,14 @@ + fi + if test -n "$PKG_CONFIG"; then + _pkg_min_version=0.9.0 +- { $as_echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5 +-$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } ++ { echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5 ++echo $ECHO_N "checking pkg-config is at least version $_pkg_min_version... $ECHO_C" >&6; } + if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + PKG_CONFIG="" + fi + +@@ -21465,10 +21265,10 @@ + gdu_cv_version_required=0.3.2 + + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gnome-doc-utils >= \$gdu_cv_version_required\"") >&5 ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gnome-doc-utils >= \$gdu_cv_version_required\"") >&5 + ($PKG_CONFIG --exists --print-errors "gnome-doc-utils >= $gdu_cv_version_required") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + gdu_cv_have_gdu=yes + else +@@ -21478,8 +21278,8 @@ + if test "$gdu_cv_have_gdu" = "yes"; then + : + else +- { { $as_echo "$as_me:$LINENO: error: gnome-doc-utils >= $gdu_cv_version_required not found" >&5 +-$as_echo "$as_me: error: gnome-doc-utils >= $gdu_cv_version_required not found" >&2;} ++ { { echo "$as_me:$LINENO: error: gnome-doc-utils >= $gdu_cv_version_required not found" >&5 ++echo "$as_me: error: gnome-doc-utils >= $gdu_cv_version_required not found" >&2;} + { (exit 1); exit 1; }; } + fi + +@@ -21566,8 +21366,8 @@ + + case "$am__api_version" in + 1.01234) +- { { $as_echo "$as_me:$LINENO: error: Automake 1.5 or newer is required to use intltool" >&5 +-$as_echo "$as_me: error: Automake 1.5 or newer is required to use intltool" >&2;} ++ { { echo "$as_me:$LINENO: error: Automake 1.5 or newer is required to use intltool" >&5 ++echo "$as_me: error: Automake 1.5 or newer is required to use intltool" >&2;} + { (exit 1); exit 1; }; } + ;; + *) +@@ -21575,27 +21375,27 @@ + esac + + if test -n "0.37.1"; then +- { $as_echo "$as_me:$LINENO: checking for intltool >= 0.37.1" >&5 +-$as_echo_n "checking for intltool >= 0.37.1... " >&6; } ++ { echo "$as_me:$LINENO: checking for intltool >= 0.37.1" >&5 ++echo $ECHO_N "checking for intltool >= 0.37.1... $ECHO_C" >&6; } + + INTLTOOL_REQUIRED_VERSION_AS_INT=`echo 0.37.1 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` + INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3` + INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` + +- { $as_echo "$as_me:$LINENO: result: $INTLTOOL_APPLIED_VERSION found" >&5 +-$as_echo "$INTLTOOL_APPLIED_VERSION found" >&6; } ++ { echo "$as_me:$LINENO: result: $INTLTOOL_APPLIED_VERSION found" >&5 ++echo "${ECHO_T}$INTLTOOL_APPLIED_VERSION found" >&6; } + test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || +- { { $as_echo "$as_me:$LINENO: error: Your intltool is too old. You need intltool 0.37.1 or later." >&5 +-$as_echo "$as_me: error: Your intltool is too old. You need intltool 0.37.1 or later." >&2;} ++ { { echo "$as_me:$LINENO: error: Your intltool is too old. You need intltool 0.37.1 or later." >&5 ++echo "$as_me: error: Your intltool is too old. You need intltool 0.37.1 or later." >&2;} + { (exit 1); exit 1; }; } + fi + + # Extract the first word of "intltool-update", so it can be a program name with args. + set dummy intltool-update; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_INTLTOOL_UPDATE+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + case $INTLTOOL_UPDATE in + [\\/]* | ?:[\\/]*) +@@ -21610,7 +21410,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_INTLTOOL_UPDATE="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -21622,20 +21422,20 @@ + fi + INTLTOOL_UPDATE=$ac_cv_path_INTLTOOL_UPDATE + if test -n "$INTLTOOL_UPDATE"; then +- { $as_echo "$as_me:$LINENO: result: $INTLTOOL_UPDATE" >&5 +-$as_echo "$INTLTOOL_UPDATE" >&6; } ++ { echo "$as_me:$LINENO: result: $INTLTOOL_UPDATE" >&5 ++echo "${ECHO_T}$INTLTOOL_UPDATE" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + + # Extract the first word of "intltool-merge", so it can be a program name with args. + set dummy intltool-merge; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_INTLTOOL_MERGE+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + case $INTLTOOL_MERGE in + [\\/]* | ?:[\\/]*) +@@ -21650,7 +21450,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_INTLTOOL_MERGE="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -21662,20 +21462,20 @@ + fi + INTLTOOL_MERGE=$ac_cv_path_INTLTOOL_MERGE + if test -n "$INTLTOOL_MERGE"; then +- { $as_echo "$as_me:$LINENO: result: $INTLTOOL_MERGE" >&5 +-$as_echo "$INTLTOOL_MERGE" >&6; } ++ { echo "$as_me:$LINENO: result: $INTLTOOL_MERGE" >&5 ++echo "${ECHO_T}$INTLTOOL_MERGE" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + + # Extract the first word of "intltool-extract", so it can be a program name with args. + set dummy intltool-extract; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_INTLTOOL_EXTRACT+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + case $INTLTOOL_EXTRACT in + [\\/]* | ?:[\\/]*) +@@ -21690,7 +21490,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_INTLTOOL_EXTRACT="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -21702,17 +21502,17 @@ + fi + INTLTOOL_EXTRACT=$ac_cv_path_INTLTOOL_EXTRACT + if test -n "$INTLTOOL_EXTRACT"; then +- { $as_echo "$as_me:$LINENO: result: $INTLTOOL_EXTRACT" >&5 +-$as_echo "$INTLTOOL_EXTRACT" >&6; } ++ { echo "$as_me:$LINENO: result: $INTLTOOL_EXTRACT" >&5 ++echo "${ECHO_T}$INTLTOOL_EXTRACT" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + + if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then +- { { $as_echo "$as_me:$LINENO: error: The intltool scripts were not found. Please install intltool." >&5 +-$as_echo "$as_me: error: The intltool scripts were not found. Please install intltool." >&2;} ++ { { echo "$as_me:$LINENO: error: The intltool scripts were not found. Please install intltool." >&5 ++echo "$as_me: error: The intltool scripts were not found. Please install intltool." >&2;} + { (exit 1); exit 1; }; } + fi + +@@ -21759,10 +21559,10 @@ + # Check the gettext tools to make sure they are GNU + # Extract the first word of "xgettext", so it can be a program name with args. + set dummy xgettext; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_XGETTEXT+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + case $XGETTEXT in + [\\/]* | ?:[\\/]*) +@@ -21777,7 +21577,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_XGETTEXT="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -21789,20 +21589,20 @@ + fi + XGETTEXT=$ac_cv_path_XGETTEXT + if test -n "$XGETTEXT"; then +- { $as_echo "$as_me:$LINENO: result: $XGETTEXT" >&5 +-$as_echo "$XGETTEXT" >&6; } ++ { echo "$as_me:$LINENO: result: $XGETTEXT" >&5 ++echo "${ECHO_T}$XGETTEXT" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + + # Extract the first word of "msgmerge", so it can be a program name with args. + set dummy msgmerge; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_MSGMERGE+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + case $MSGMERGE in + [\\/]* | ?:[\\/]*) +@@ -21817,7 +21617,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_MSGMERGE="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -21829,20 +21629,20 @@ + fi + MSGMERGE=$ac_cv_path_MSGMERGE + if test -n "$MSGMERGE"; then +- { $as_echo "$as_me:$LINENO: result: $MSGMERGE" >&5 +-$as_echo "$MSGMERGE" >&6; } ++ { echo "$as_me:$LINENO: result: $MSGMERGE" >&5 ++echo "${ECHO_T}$MSGMERGE" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + + # Extract the first word of "msgfmt", so it can be a program name with args. + set dummy msgfmt; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_MSGFMT+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + case $MSGFMT in + [\\/]* | ?:[\\/]*) +@@ -21857,7 +21657,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_MSGFMT="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -21869,34 +21669,34 @@ + fi + MSGFMT=$ac_cv_path_MSGFMT + if test -n "$MSGFMT"; then +- { $as_echo "$as_me:$LINENO: result: $MSGFMT" >&5 +-$as_echo "$MSGFMT" >&6; } ++ { echo "$as_me:$LINENO: result: $MSGFMT" >&5 ++echo "${ECHO_T}$MSGFMT" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + + if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then +- { { $as_echo "$as_me:$LINENO: error: GNU gettext tools not found; required for intltool" >&5 +-$as_echo "$as_me: error: GNU gettext tools not found; required for intltool" >&2;} ++ { { echo "$as_me:$LINENO: error: GNU gettext tools not found; required for intltool" >&5 ++echo "$as_me: error: GNU gettext tools not found; required for intltool" >&2;} + { (exit 1); exit 1; }; } + fi + xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" + mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" + mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" + if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then +- { { $as_echo "$as_me:$LINENO: error: GNU gettext tools not found; required for intltool" >&5 +-$as_echo "$as_me: error: GNU gettext tools not found; required for intltool" >&2;} ++ { { echo "$as_me:$LINENO: error: GNU gettext tools not found; required for intltool" >&5 ++echo "$as_me: error: GNU gettext tools not found; required for intltool" >&2;} + { (exit 1); exit 1; }; } + fi + + # Extract the first word of "perl", so it can be a program name with args. + set dummy perl; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_INTLTOOL_PERL+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + case $INTLTOOL_PERL in + [\\/]* | ?:[\\/]*) +@@ -21911,7 +21711,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_INTLTOOL_PERL="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -21923,33 +21723,33 @@ + fi + INTLTOOL_PERL=$ac_cv_path_INTLTOOL_PERL + if test -n "$INTLTOOL_PERL"; then +- { $as_echo "$as_me:$LINENO: result: $INTLTOOL_PERL" >&5 +-$as_echo "$INTLTOOL_PERL" >&6; } ++ { echo "$as_me:$LINENO: result: $INTLTOOL_PERL" >&5 ++echo "${ECHO_T}$INTLTOOL_PERL" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + + if test -z "$INTLTOOL_PERL"; then +- { { $as_echo "$as_me:$LINENO: error: perl not found; required for intltool" >&5 +-$as_echo "$as_me: error: perl not found; required for intltool" >&2;} ++ { { echo "$as_me:$LINENO: error: perl not found; required for intltool" >&5 ++echo "$as_me: error: perl not found; required for intltool" >&2;} + { (exit 1); exit 1; }; } + fi + if test -z "`$INTLTOOL_PERL -v | fgrep '5.' 2> /dev/null`"; then +- { { $as_echo "$as_me:$LINENO: error: perl 5.x required for intltool" >&5 +-$as_echo "$as_me: error: perl 5.x required for intltool" >&2;} ++ { { echo "$as_me:$LINENO: error: perl 5.x required for intltool" >&5 ++echo "$as_me: error: perl 5.x required for intltool" >&2;} + { (exit 1); exit 1; }; } + fi + if test "x" != "xno-xml"; then +- { $as_echo "$as_me:$LINENO: checking for XML::Parser" >&5 +-$as_echo_n "checking for XML::Parser... " >&6; } ++ { echo "$as_me:$LINENO: checking for XML::Parser" >&5 ++echo $ECHO_N "checking for XML::Parser... $ECHO_C" >&6; } + if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then +- { $as_echo "$as_me:$LINENO: result: ok" >&5 +-$as_echo "ok" >&6; } ++ { echo "$as_me:$LINENO: result: ok" >&5 ++echo "${ECHO_T}ok" >&6; } + else +- { { $as_echo "$as_me:$LINENO: error: XML::Parser perl module is required for intltool" >&5 +-$as_echo "$as_me: error: XML::Parser perl module is required for intltool" >&2;} ++ { { echo "$as_me:$LINENO: error: XML::Parser perl module is required for intltool" >&5 ++echo "$as_me: error: XML::Parser perl module is required for intltool" >&2;} + { (exit 1); exit 1; }; } + fi + fi +@@ -21982,32 +21782,29 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + DATADIRNAME=share + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + case $host in + *-*-solaris*) +- { $as_echo "$as_me:$LINENO: checking for bind_textdomain_codeset" >&5 +-$as_echo_n "checking for bind_textdomain_codeset... " >&6; } ++ { echo "$as_me:$LINENO: checking for bind_textdomain_codeset" >&5 ++echo $ECHO_N "checking for bind_textdomain_codeset... $ECHO_C" >&6; } + if test "${ac_cv_func_bind_textdomain_codeset+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -22060,35 +21857,31 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_func_bind_textdomain_codeset=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_func_bind_textdomain_codeset=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_bind_textdomain_codeset" >&5 +-$as_echo "$ac_cv_func_bind_textdomain_codeset" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_func_bind_textdomain_codeset" >&5 ++echo "${ECHO_T}$ac_cv_func_bind_textdomain_codeset" >&6; } + if test $ac_cv_func_bind_textdomain_codeset = yes; then + DATADIRNAME=share + else +@@ -22102,7 +21895,6 @@ + esac + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +@@ -22124,21 +21916,20 @@ + + for ac_header in locale.h + do +-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` + if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +-$as_echo_n "checking for $ac_header... " >&6; } ++ { echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } + if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-ac_res=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + else + # Is the header compilable? +-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-$as_echo_n "checking $ac_header usability... " >&6; } ++{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 ++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -22154,33 +21945,32 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_header_compiler=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_compiler=no + fi + + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-$as_echo "$ac_header_compiler" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-$as_echo_n "checking $ac_header presence... " >&6; } ++{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 ++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -22194,52 +21984,51 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + ac_header_preproc=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no + fi + + rm -f conftest.err conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-$as_echo "$ac_header_preproc" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 ++echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 ++echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +-$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +-$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 ++echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 ++echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 ++echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 ++echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 ++echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 ++echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( cat <<\_ASBOX + ## ----------------------------------------------------------------------------------- ## + ## Report this to http://bugzilla.gnome.org/enter_bug.cgi?product=gnome-control-center ## +@@ -22248,23 +22037,21 @@ + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; + esac +-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +-$as_echo_n "checking for $ac_header... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } + if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + eval "$as_ac_Header=\$ac_header_preproc" + fi +-ac_res=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + + fi +-if test `eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` = yes; then ++if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 + _ACEOF + + fi +@@ -22272,10 +22059,10 @@ + done + + if test $ac_cv_header_locale_h = yes; then +- { $as_echo "$as_me:$LINENO: checking for LC_MESSAGES" >&5 +-$as_echo_n "checking for LC_MESSAGES... " >&6; } ++ { echo "$as_me:$LINENO: checking for LC_MESSAGES" >&5 ++echo $ECHO_N "checking for LC_MESSAGES... $ECHO_C" >&6; } + if test "${am_cv_val_LC_MESSAGES+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -22298,35 +22085,31 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + am_cv_val_LC_MESSAGES=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + am_cv_val_LC_MESSAGES=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-{ $as_echo "$as_me:$LINENO: result: $am_cv_val_LC_MESSAGES" >&5 +-$as_echo "$am_cv_val_LC_MESSAGES" >&6; } ++{ echo "$as_me:$LINENO: result: $am_cv_val_LC_MESSAGES" >&5 ++echo "${ECHO_T}$am_cv_val_LC_MESSAGES" >&6; } + if test $am_cv_val_LC_MESSAGES = yes; then + + cat >>confdefs.h <<\_ACEOF +@@ -22345,17 +22128,17 @@ + INTLLIBS= + + if test "${ac_cv_header_libintl_h+set}" = set; then +- { $as_echo "$as_me:$LINENO: checking for libintl.h" >&5 +-$as_echo_n "checking for libintl.h... " >&6; } ++ { echo "$as_me:$LINENO: checking for libintl.h" >&5 ++echo $ECHO_N "checking for libintl.h... $ECHO_C" >&6; } + if test "${ac_cv_header_libintl_h+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_libintl_h" >&5 +-$as_echo "$ac_cv_header_libintl_h" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_header_libintl_h" >&5 ++echo "${ECHO_T}$ac_cv_header_libintl_h" >&6; } + else + # Is the header compilable? +-{ $as_echo "$as_me:$LINENO: checking libintl.h usability" >&5 +-$as_echo_n "checking libintl.h usability... " >&6; } ++{ echo "$as_me:$LINENO: checking libintl.h usability" >&5 ++echo $ECHO_N "checking libintl.h usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -22371,33 +22154,32 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_header_compiler=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_compiler=no + fi + + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-$as_echo "$ac_header_compiler" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-{ $as_echo "$as_me:$LINENO: checking libintl.h presence" >&5 +-$as_echo_n "checking libintl.h presence... " >&6; } ++{ echo "$as_me:$LINENO: checking libintl.h presence" >&5 ++echo $ECHO_N "checking libintl.h presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -22411,52 +22193,51 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + ac_header_preproc=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no + fi + + rm -f conftest.err conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-$as_echo "$ac_header_preproc" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) +- { $as_echo "$as_me:$LINENO: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&5 +-$as_echo "$as_me: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the compiler's result" >&5 +-$as_echo "$as_me: WARNING: libintl.h: proceeding with the compiler's result" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&5 ++echo "$as_me: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the compiler's result" >&5 ++echo "$as_me: WARNING: libintl.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) +- { $as_echo "$as_me:$LINENO: WARNING: libintl.h: present but cannot be compiled" >&5 +-$as_echo "$as_me: WARNING: libintl.h: present but cannot be compiled" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: libintl.h: check for missing prerequisite headers?" >&5 +-$as_echo "$as_me: WARNING: libintl.h: check for missing prerequisite headers?" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: libintl.h: see the Autoconf documentation" >&5 +-$as_echo "$as_me: WARNING: libintl.h: see the Autoconf documentation" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: libintl.h: section \"Present But Cannot Be Compiled\"" >&5 +-$as_echo "$as_me: WARNING: libintl.h: section \"Present But Cannot Be Compiled\"" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the preprocessor's result" >&5 +-$as_echo "$as_me: WARNING: libintl.h: proceeding with the preprocessor's result" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: libintl.h: in the future, the compiler will take precedence" >&5 +-$as_echo "$as_me: WARNING: libintl.h: in the future, the compiler will take precedence" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: present but cannot be compiled" >&5 ++echo "$as_me: WARNING: libintl.h: present but cannot be compiled" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: check for missing prerequisite headers?" >&5 ++echo "$as_me: WARNING: libintl.h: check for missing prerequisite headers?" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: see the Autoconf documentation" >&5 ++echo "$as_me: WARNING: libintl.h: see the Autoconf documentation" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: section \"Present But Cannot Be Compiled\"" >&5 ++echo "$as_me: WARNING: libintl.h: section \"Present But Cannot Be Compiled\"" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the preprocessor's result" >&5 ++echo "$as_me: WARNING: libintl.h: proceeding with the preprocessor's result" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: in the future, the compiler will take precedence" >&5 ++echo "$as_me: WARNING: libintl.h: in the future, the compiler will take precedence" >&2;} + ( cat <<\_ASBOX + ## ----------------------------------------------------------------------------------- ## + ## Report this to http://bugzilla.gnome.org/enter_bug.cgi?product=gnome-control-center ## +@@ -22465,15 +22246,15 @@ + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; + esac +-{ $as_echo "$as_me:$LINENO: checking for libintl.h" >&5 +-$as_echo_n "checking for libintl.h... " >&6; } ++{ echo "$as_me:$LINENO: checking for libintl.h" >&5 ++echo $ECHO_N "checking for libintl.h... $ECHO_C" >&6; } + if test "${ac_cv_header_libintl_h+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_cv_header_libintl_h=$ac_header_preproc + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_libintl_h" >&5 +-$as_echo "$ac_cv_header_libintl_h" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_header_libintl_h" >&5 ++echo "${ECHO_T}$ac_cv_header_libintl_h" >&6; } + + fi + if test $ac_cv_header_libintl_h = yes; then +@@ -22483,10 +22264,10 @@ + # + # First check in libc + # +- { $as_echo "$as_me:$LINENO: checking for ngettext in libc" >&5 +-$as_echo_n "checking for ngettext in libc... " >&6; } ++ { echo "$as_me:$LINENO: checking for ngettext in libc" >&5 ++echo $ECHO_N "checking for ngettext in libc... $ECHO_C" >&6; } + if test "${gt_cv_func_ngettext_libc+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -22511,42 +22292,38 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + gt_cv_func_ngettext_libc=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + gt_cv_func_ngettext_libc=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + + fi +-{ $as_echo "$as_me:$LINENO: result: $gt_cv_func_ngettext_libc" >&5 +-$as_echo "$gt_cv_func_ngettext_libc" >&6; } ++{ echo "$as_me:$LINENO: result: $gt_cv_func_ngettext_libc" >&5 ++echo "${ECHO_T}$gt_cv_func_ngettext_libc" >&6; } + + if test "$gt_cv_func_ngettext_libc" = "yes" ; then +- { $as_echo "$as_me:$LINENO: checking for dgettext in libc" >&5 +-$as_echo_n "checking for dgettext in libc... " >&6; } ++ { echo "$as_me:$LINENO: checking for dgettext in libc" >&5 ++echo $ECHO_N "checking for dgettext in libc... $ECHO_C" >&6; } + if test "${gt_cv_func_dgettext_libc+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -22571,47 +22348,43 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + gt_cv_func_dgettext_libc=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + gt_cv_func_dgettext_libc=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + + fi +-{ $as_echo "$as_me:$LINENO: result: $gt_cv_func_dgettext_libc" >&5 +-$as_echo "$gt_cv_func_dgettext_libc" >&6; } ++{ echo "$as_me:$LINENO: result: $gt_cv_func_dgettext_libc" >&5 ++echo "${ECHO_T}$gt_cv_func_dgettext_libc" >&6; } + fi + + if test "$gt_cv_func_ngettext_libc" = "yes" ; then + + for ac_func in bind_textdomain_codeset + do +-as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +-{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 +-$as_echo_n "checking for $ac_func... " >&6; } ++as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } + if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -22664,41 +22437,35 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_var=no" + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-ac_res=`eval 'as_val=${'$as_ac_var'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } +-if test `eval 'as_val=${'$as_ac_var'} +- $as_echo "$as_val"'` = yes; then ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +-#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 ++#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 + _ACEOF + + fi +@@ -22713,10 +22480,10 @@ + || test "$gt_cv_func_ngettext_libc" != "yes" \ + || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then + +- { $as_echo "$as_me:$LINENO: checking for bindtextdomain in -lintl" >&5 +-$as_echo_n "checking for bindtextdomain in -lintl... " >&6; } ++ { echo "$as_me:$LINENO: checking for bindtextdomain in -lintl" >&5 ++echo $ECHO_N "checking for bindtextdomain in -lintl... $ECHO_C" >&6; } + if test "${ac_cv_lib_intl_bindtextdomain+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lintl $LIBS" +@@ -22748,41 +22515,37 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_intl_bindtextdomain=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_intl_bindtextdomain=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_intl_bindtextdomain" >&5 +-$as_echo "$ac_cv_lib_intl_bindtextdomain" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_bindtextdomain" >&5 ++echo "${ECHO_T}$ac_cv_lib_intl_bindtextdomain" >&6; } + if test $ac_cv_lib_intl_bindtextdomain = yes; then +- { $as_echo "$as_me:$LINENO: checking for ngettext in -lintl" >&5 +-$as_echo_n "checking for ngettext in -lintl... " >&6; } ++ { echo "$as_me:$LINENO: checking for ngettext in -lintl" >&5 ++echo $ECHO_N "checking for ngettext in -lintl... $ECHO_C" >&6; } + if test "${ac_cv_lib_intl_ngettext+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lintl $LIBS" +@@ -22814,41 +22577,37 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_intl_ngettext=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_intl_ngettext=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_intl_ngettext" >&5 +-$as_echo "$ac_cv_lib_intl_ngettext" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_ngettext" >&5 ++echo "${ECHO_T}$ac_cv_lib_intl_ngettext" >&6; } + if test $ac_cv_lib_intl_ngettext = yes; then +- { $as_echo "$as_me:$LINENO: checking for dgettext in -lintl" >&5 +-$as_echo_n "checking for dgettext in -lintl... " >&6; } ++ { echo "$as_me:$LINENO: checking for dgettext in -lintl" >&5 ++echo $ECHO_N "checking for dgettext in -lintl... $ECHO_C" >&6; } + if test "${ac_cv_lib_intl_dgettext+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lintl $LIBS" +@@ -22880,36 +22639,32 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_intl_dgettext=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_intl_dgettext=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_intl_dgettext" >&5 +-$as_echo "$ac_cv_lib_intl_dgettext" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_dgettext" >&5 ++echo "${ECHO_T}$ac_cv_lib_intl_dgettext" >&6; } + if test $ac_cv_lib_intl_dgettext = yes; then + gt_cv_func_dgettext_libintl=yes + fi +@@ -22920,14 +22675,14 @@ + + + if test "$gt_cv_func_dgettext_libintl" != "yes" ; then +- { $as_echo "$as_me:$LINENO: checking if -liconv is needed to use gettext" >&5 +-$as_echo_n "checking if -liconv is needed to use gettext... " >&6; } +- { $as_echo "$as_me:$LINENO: result: " >&5 +-$as_echo "" >&6; } +- { $as_echo "$as_me:$LINENO: checking for ngettext in -lintl" >&5 +-$as_echo_n "checking for ngettext in -lintl... " >&6; } ++ { echo "$as_me:$LINENO: checking if -liconv is needed to use gettext" >&5 ++echo $ECHO_N "checking if -liconv is needed to use gettext... $ECHO_C" >&6; } ++ { echo "$as_me:$LINENO: result: " >&5 ++echo "${ECHO_T}" >&6; } ++ { echo "$as_me:$LINENO: checking for ngettext in -lintl" >&5 ++echo $ECHO_N "checking for ngettext in -lintl... $ECHO_C" >&6; } + if test "${ac_cv_lib_intl_ngettext+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lintl -liconv $LIBS" +@@ -22959,41 +22714,37 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_intl_ngettext=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_intl_ngettext=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_intl_ngettext" >&5 +-$as_echo "$ac_cv_lib_intl_ngettext" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_ngettext" >&5 ++echo "${ECHO_T}$ac_cv_lib_intl_ngettext" >&6; } + if test $ac_cv_lib_intl_ngettext = yes; then +- { $as_echo "$as_me:$LINENO: checking for dcgettext in -lintl" >&5 +-$as_echo_n "checking for dcgettext in -lintl... " >&6; } ++ { echo "$as_me:$LINENO: checking for dcgettext in -lintl" >&5 ++echo $ECHO_N "checking for dcgettext in -lintl... $ECHO_C" >&6; } + if test "${ac_cv_lib_intl_dcgettext+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lintl -liconv $LIBS" +@@ -23025,36 +22776,32 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_intl_dcgettext=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_intl_dcgettext=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_intl_dcgettext" >&5 +-$as_echo "$ac_cv_lib_intl_dcgettext" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_dcgettext" >&5 ++echo "${ECHO_T}$ac_cv_lib_intl_dcgettext" >&6; } + if test $ac_cv_lib_intl_dcgettext = yes; then + gt_cv_func_dgettext_libintl=yes + libintl_extra_libs=-liconv +@@ -23080,11 +22827,11 @@ + + for ac_func in bind_textdomain_codeset + do +-as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +-{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 +-$as_echo_n "checking for $ac_func... " >&6; } ++as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } + if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -23137,41 +22884,35 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_var=no" + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-ac_res=`eval 'as_val=${'$as_ac_var'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } +-if test `eval 'as_val=${'$as_ac_var'} +- $as_echo "$as_val"'` = yes; then ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +-#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 ++#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 + _ACEOF + + fi +@@ -23207,10 +22948,10 @@ + + # Extract the first word of "msgfmt", so it can be a program name with args. + set dummy msgfmt; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_MSGFMT+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + case "$MSGFMT" in + /*) +@@ -23234,11 +22975,11 @@ + fi + MSGFMT="$ac_cv_path_MSGFMT" + if test "$MSGFMT" != "no"; then +- { $as_echo "$as_me:$LINENO: result: $MSGFMT" >&5 +-$as_echo "$MSGFMT" >&6; } ++ { echo "$as_me:$LINENO: result: $MSGFMT" >&5 ++echo "${ECHO_T}$MSGFMT" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + if test "$MSGFMT" != "no"; then + glib_save_LIBS="$LIBS" +@@ -23246,11 +22987,11 @@ + + for ac_func in dcgettext + do +-as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +-{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 +-$as_echo_n "checking for $ac_func... " >&6; } ++as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } + if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -23303,49 +23044,43 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_var=no" + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-ac_res=`eval 'as_val=${'$as_ac_var'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } +-if test `eval 'as_val=${'$as_ac_var'} +- $as_echo "$as_val"'` = yes; then ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +-#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 ++#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 + _ACEOF + + fi + done + + MSGFMT_OPTS= +- { $as_echo "$as_me:$LINENO: checking if msgfmt accepts -c" >&5 +-$as_echo_n "checking if msgfmt accepts -c... " >&6; } ++ { echo "$as_me:$LINENO: checking if msgfmt accepts -c" >&5 ++echo $ECHO_N "checking if msgfmt accepts -c... $ECHO_C" >&6; } + cat >conftest.foo <<_ACEOF + + msgid "" +@@ -23359,25 +23094,25 @@ + "Content-Transfer-Encoding: 8bit\n" + + _ACEOF +-if { ($as_echo "$as_me:$LINENO: \$MSGFMT -c -o /dev/null conftest.foo") >&5 ++if { (echo "$as_me:$LINENO: \$MSGFMT -c -o /dev/null conftest.foo") >&5 + ($MSGFMT -c -o /dev/null conftest.foo) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +- MSGFMT_OPTS=-c; { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } +-else { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ MSGFMT_OPTS=-c; { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + echo "$as_me: failed input was:" >&5 + sed 's/^/| /' conftest.foo >&5 + fi + + # Extract the first word of "gmsgfmt", so it can be a program name with args. + set dummy gmsgfmt; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_GMSGFMT+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + case $GMSGFMT in + [\\/]* | ?:[\\/]*) +@@ -23392,7 +23127,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -23405,20 +23140,20 @@ + fi + GMSGFMT=$ac_cv_path_GMSGFMT + if test -n "$GMSGFMT"; then +- { $as_echo "$as_me:$LINENO: result: $GMSGFMT" >&5 +-$as_echo "$GMSGFMT" >&6; } ++ { echo "$as_me:$LINENO: result: $GMSGFMT" >&5 ++echo "${ECHO_T}$GMSGFMT" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + + # Extract the first word of "xgettext", so it can be a program name with args. + set dummy xgettext; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_XGETTEXT+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + case "$XGETTEXT" in + /*) +@@ -23442,11 +23177,11 @@ + fi + XGETTEXT="$ac_cv_path_XGETTEXT" + if test "$XGETTEXT" != ":"; then +- { $as_echo "$as_me:$LINENO: result: $XGETTEXT" >&5 +-$as_echo "$XGETTEXT" >&6; } ++ { echo "$as_me:$LINENO: result: $XGETTEXT" >&5 ++echo "${ECHO_T}$XGETTEXT" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + cat >conftest.$ac_ext <<_ACEOF +@@ -23471,33 +23206,30 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + CATOBJEXT=.gmo + DATADIRNAME=share + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + case $host in + *-*-solaris*) +- { $as_echo "$as_me:$LINENO: checking for bind_textdomain_codeset" >&5 +-$as_echo_n "checking for bind_textdomain_codeset... " >&6; } ++ { echo "$as_me:$LINENO: checking for bind_textdomain_codeset" >&5 ++echo $ECHO_N "checking for bind_textdomain_codeset... $ECHO_C" >&6; } + if test "${ac_cv_func_bind_textdomain_codeset+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -23550,35 +23282,31 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_func_bind_textdomain_codeset=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_func_bind_textdomain_codeset=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_bind_textdomain_codeset" >&5 +-$as_echo "$ac_cv_func_bind_textdomain_codeset" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_func_bind_textdomain_codeset" >&5 ++echo "${ECHO_T}$ac_cv_func_bind_textdomain_codeset" >&6; } + if test $ac_cv_func_bind_textdomain_codeset = yes; then + CATOBJEXT=.gmo + DATADIRNAME=share +@@ -23595,7 +23323,6 @@ + esac + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS="$glib_save_LIBS" +@@ -23621,8 +23348,8 @@ + if $XGETTEXT --omit-header /dev/null 2> /dev/null; then + : ; + else +- { $as_echo "$as_me:$LINENO: result: found xgettext program is not GNU xgettext; ignore it" >&5 +-$as_echo "found xgettext program is not GNU xgettext; ignore it" >&6; } ++ { echo "$as_me:$LINENO: result: found xgettext program is not GNU xgettext; ignore it" >&5 ++echo "${ECHO_T}found xgettext program is not GNU xgettext; ignore it" >&6; } + XGETTEXT=":" + fi + fi +@@ -23654,8 +23381,8 @@ + if test "x$ALL_LINGUAS" = "x"; then + LINGUAS= + else +- { $as_echo "$as_me:$LINENO: checking for catalogs to be installed" >&5 +-$as_echo_n "checking for catalogs to be installed... " >&6; } ++ { echo "$as_me:$LINENO: checking for catalogs to be installed" >&5 ++echo $ECHO_N "checking for catalogs to be installed... $ECHO_C" >&6; } + NEW_LINGUAS= + for presentlang in $ALL_LINGUAS; do + useit=no +@@ -23679,8 +23406,8 @@ + fi + done + LINGUAS=$NEW_LINGUAS +- { $as_echo "$as_me:$LINENO: result: $LINGUAS" >&5 +-$as_echo "$LINGUAS" >&6; } ++ { echo "$as_me:$LINENO: result: $LINGUAS" >&5 ++echo "${ECHO_T}$LINGUAS" >&6; } + fi + + if test -n "$LINGUAS"; then +@@ -23773,8 +23500,8 @@ + for option in -Wno-sign-compare; do + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS $option" +- { $as_echo "$as_me:$LINENO: checking whether gcc understands $option" >&5 +-$as_echo_n "checking whether gcc understands $option... " >&6; } ++ { echo "$as_me:$LINENO: checking whether gcc understands $option" >&5 ++echo $ECHO_N "checking whether gcc understands $option... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -23796,21 +23523,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + has_option=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + has_option=no +@@ -23818,8 +23544,8 @@ + + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + CFLAGS="$SAVE_CFLAGS" +- { $as_echo "$as_me:$LINENO: result: $has_option" >&5 +-$as_echo "$has_option" >&6; } ++ { echo "$as_me:$LINENO: result: $has_option" >&5 ++echo "${ECHO_T}$has_option" >&6; } + if test $has_option = yes; then + warning_flags="$warning_flags $option" + fi +@@ -23832,16 +23558,16 @@ + fi + ;; + *) +- { { $as_echo "$as_me:$LINENO: error: Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" >&5 +-$as_echo "$as_me: error: Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" >&2;} ++ { { echo "$as_me:$LINENO: error: Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" >&5 ++echo "$as_me: error: Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" >&2;} + { (exit 1); exit 1; }; } + ;; + esac + CFLAGS="$realsave_CFLAGS" +- { $as_echo "$as_me:$LINENO: checking what warning flags to pass to the C compiler" >&5 +-$as_echo_n "checking what warning flags to pass to the C compiler... " >&6; } +- { $as_echo "$as_me:$LINENO: result: $warning_flags" >&5 +-$as_echo "$warning_flags" >&6; } ++ { echo "$as_me:$LINENO: checking what warning flags to pass to the C compiler" >&5 ++echo $ECHO_N "checking what warning flags to pass to the C compiler... $ECHO_C" >&6; } ++ { echo "$as_me:$LINENO: result: $warning_flags" >&5 ++echo "${ECHO_T}$warning_flags" >&6; } + + # Check whether --enable-iso-c was given. + if test "${enable_iso_c+set}" = set; then +@@ -23851,8 +23577,8 @@ + fi + + +- { $as_echo "$as_me:$LINENO: checking what language compliance flags to pass to the C compiler" >&5 +-$as_echo_n "checking what language compliance flags to pass to the C compiler... " >&6; } ++ { echo "$as_me:$LINENO: checking what language compliance flags to pass to the C compiler" >&5 ++echo $ECHO_N "checking what language compliance flags to pass to the C compiler... $ECHO_C" >&6; } + complCFLAGS= + if test "x$enable_iso_c" != "xno"; then + if test "x$GCC" = "xyes"; then +@@ -23866,8 +23592,8 @@ + esac + fi + fi +- { $as_echo "$as_me:$LINENO: result: $complCFLAGS" >&5 +-$as_echo "$complCFLAGS" >&6; } ++ { echo "$as_me:$LINENO: result: $complCFLAGS" >&5 ++echo "${ECHO_T}$complCFLAGS" >&6; } + + WARN_CFLAGS="$warning_flags $complCFLAGS" + +@@ -23883,8 +23609,8 @@ + + + +-{ $as_echo "$as_me:$LINENO: checking for X" >&5 +-$as_echo_n "checking for X... " >&6; } ++{ echo "$as_me:$LINENO: checking for X" >&5 ++echo $ECHO_N "checking for X... $ECHO_C" >&6; } + + + # Check whether --with-x was given. +@@ -23898,11 +23624,11 @@ + have_x=disabled + else + case $x_includes,$x_libraries in #( +- *\'*) { { $as_echo "$as_me:$LINENO: error: Cannot use X directory names containing '" >&5 +-$as_echo "$as_me: error: Cannot use X directory names containing '" >&2;} ++ *\'*) { { echo "$as_me:$LINENO: error: Cannot use X directory names containing '" >&5 ++echo "$as_me: error: Cannot use X directory names containing '" >&2;} + { (exit 1); exit 1; }; };; #( + *,NONE | NONE,*) if test "${ac_cv_have_x+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + # One or both of the vars are not set, and there is no cached value. + ac_x_includes=no ac_x_libraries=no +@@ -23923,7 +23649,7 @@ + eval "ac_im_$ac_var=\`\${MAKE-make} $ac_var 2>/dev/null | sed -n 's/^$ac_var=//p'\`" + done + # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. +- for ac_extension in a so sl dylib la dll; do ++ for ac_extension in a so sl; do + if test ! -f "$ac_im_usrlibdir/libX11.$ac_extension" && + test -f "$ac_im_libdir/libX11.$ac_extension"; then + ac_im_usrlibdir=$ac_im_libdir; break +@@ -23998,14 +23724,13 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err +@@ -24013,7 +23738,7 @@ + # We can compile using X headers with no special include directory. + ac_x_includes= + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + for ac_dir in $ac_x_header_dirs; do +@@ -24054,33 +23779,30 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + LIBS=$ac_save_LIBS + # We can link X programs with no special library path. + ac_x_libraries= + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + LIBS=$ac_save_LIBS +-for ac_dir in `$as_echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g` ++for ac_dir in `echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g` + do + # Don't even attempt the hair of trying to link an X program! +- for ac_extension in a so sl dylib la dll; do ++ for ac_extension in a so sl; do + if test -r "$ac_dir/libX11.$ac_extension"; then + ac_x_libraries=$ac_dir + break 2 +@@ -24089,7 +23811,6 @@ + done + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi # $ac_x_libraries = no +@@ -24112,8 +23833,8 @@ + fi # $with_x != no + + if test "$have_x" != yes; then +- { $as_echo "$as_me:$LINENO: result: $have_x" >&5 +-$as_echo "$have_x" >&6; } ++ { echo "$as_me:$LINENO: result: $have_x" >&5 ++echo "${ECHO_T}$have_x" >&6; } + no_x=yes + else + # If each of the values was on the command line, it overrides each guess. +@@ -24123,8 +23844,8 @@ + ac_cv_have_x="have_x=yes\ + ac_x_includes='$x_includes'\ + ac_x_libraries='$x_libraries'" +- { $as_echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5 +-$as_echo "libraries $x_libraries, headers $x_includes" >&6; } ++ { echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5 ++echo "${ECHO_T}libraries $x_libraries, headers $x_includes" >&6; } + fi + + if test "$no_x" = yes; then +@@ -24145,8 +23866,8 @@ + X_LIBS="$X_LIBS -L$x_libraries" + # For Solaris; some versions of Sun CC require a space after -R and + # others require no space. Words are not sufficient . . . . +- { $as_echo "$as_me:$LINENO: checking whether -R must be followed by a space" >&5 +-$as_echo_n "checking whether -R must be followed by a space... " >&6; } ++ { echo "$as_me:$LINENO: checking whether -R must be followed by a space" >&5 ++echo $ECHO_N "checking whether -R must be followed by a space... $ECHO_C" >&6; } + ac_xsave_LIBS=$LIBS; LIBS="$LIBS -R$x_libraries" + ac_xsave_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes +@@ -24171,26 +23892,23 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + X_LIBS="$X_LIBS -R$x_libraries" + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + LIBS="$ac_xsave_LIBS -R $x_libraries" +@@ -24215,38 +23933,33 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + X_LIBS="$X_LIBS -R $x_libraries" + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- { $as_echo "$as_me:$LINENO: result: neither works" >&5 +-$as_echo "neither works" >&6; } ++ { echo "$as_me:$LINENO: result: neither works" >&5 ++echo "${ECHO_T}neither works" >&6; } + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + ac_c_werror_flag=$ac_xsave_c_werror_flag +@@ -24292,30 +24005,27 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + : + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- { $as_echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet" >&5 +-$as_echo_n "checking for dnet_ntoa in -ldnet... " >&6; } ++ { echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet" >&5 ++echo $ECHO_N "checking for dnet_ntoa in -ldnet... $ECHO_C" >&6; } + if test "${ac_cv_lib_dnet_dnet_ntoa+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-ldnet $LIBS" +@@ -24347,45 +24057,41 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_dnet_dnet_ntoa=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dnet_dnet_ntoa=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_dnet_ntoa" >&5 +-$as_echo "$ac_cv_lib_dnet_dnet_ntoa" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_dnet_ntoa" >&5 ++echo "${ECHO_T}$ac_cv_lib_dnet_dnet_ntoa" >&6; } + if test $ac_cv_lib_dnet_dnet_ntoa = yes; then + X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet" + fi + + if test $ac_cv_lib_dnet_dnet_ntoa = no; then +- { $as_echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet_stub" >&5 +-$as_echo_n "checking for dnet_ntoa in -ldnet_stub... " >&6; } ++ { echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet_stub" >&5 ++echo $ECHO_N "checking for dnet_ntoa in -ldnet_stub... $ECHO_C" >&6; } + if test "${ac_cv_lib_dnet_stub_dnet_ntoa+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-ldnet_stub $LIBS" +@@ -24417,36 +24123,32 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_dnet_stub_dnet_ntoa=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dnet_stub_dnet_ntoa=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5 +-$as_echo "$ac_cv_lib_dnet_stub_dnet_ntoa" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5 ++echo "${ECHO_T}$ac_cv_lib_dnet_stub_dnet_ntoa" >&6; } + if test $ac_cv_lib_dnet_stub_dnet_ntoa = yes; then + X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub" + fi +@@ -24454,7 +24156,6 @@ + fi + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS="$ac_xsave_LIBS" +@@ -24467,10 +24168,10 @@ + # on Irix 5.2, according to T.E. Dickey. + # The functions gethostbyname, getservbyname, and inet_addr are + # in -lbsd on LynxOS 3.0.1/i386, according to Lars Hecking. +- { $as_echo "$as_me:$LINENO: checking for gethostbyname" >&5 +-$as_echo_n "checking for gethostbyname... " >&6; } ++ { echo "$as_me:$LINENO: checking for gethostbyname" >&5 ++echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6; } + if test "${ac_cv_func_gethostbyname+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -24523,41 +24224,37 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_func_gethostbyname=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_func_gethostbyname=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5 +-$as_echo "$ac_cv_func_gethostbyname" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5 ++echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6; } + + if test $ac_cv_func_gethostbyname = no; then +- { $as_echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 +-$as_echo_n "checking for gethostbyname in -lnsl... " >&6; } ++ { echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 ++echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6; } + if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lnsl $LIBS" +@@ -24589,45 +24286,41 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_nsl_gethostbyname=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_nsl_gethostbyname=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5 +-$as_echo "$ac_cv_lib_nsl_gethostbyname" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5 ++echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6; } + if test $ac_cv_lib_nsl_gethostbyname = yes; then + X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl" + fi + + if test $ac_cv_lib_nsl_gethostbyname = no; then +- { $as_echo "$as_me:$LINENO: checking for gethostbyname in -lbsd" >&5 +-$as_echo_n "checking for gethostbyname in -lbsd... " >&6; } ++ { echo "$as_me:$LINENO: checking for gethostbyname in -lbsd" >&5 ++echo $ECHO_N "checking for gethostbyname in -lbsd... $ECHO_C" >&6; } + if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lbsd $LIBS" +@@ -24659,36 +24352,32 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_bsd_gethostbyname=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_bsd_gethostbyname=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_gethostbyname" >&5 +-$as_echo "$ac_cv_lib_bsd_gethostbyname" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_gethostbyname" >&5 ++echo "${ECHO_T}$ac_cv_lib_bsd_gethostbyname" >&6; } + if test $ac_cv_lib_bsd_gethostbyname = yes; then + X_EXTRA_LIBS="$X_EXTRA_LIBS -lbsd" + fi +@@ -24703,10 +24392,10 @@ + # variants that don't use the name server (or something). -lsocket + # must be given before -lnsl if both are needed. We assume that + # if connect needs -lnsl, so does gethostbyname. +- { $as_echo "$as_me:$LINENO: checking for connect" >&5 +-$as_echo_n "checking for connect... " >&6; } ++ { echo "$as_me:$LINENO: checking for connect" >&5 ++echo $ECHO_N "checking for connect... $ECHO_C" >&6; } + if test "${ac_cv_func_connect+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -24759,41 +24448,37 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_func_connect=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_func_connect=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5 +-$as_echo "$ac_cv_func_connect" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5 ++echo "${ECHO_T}$ac_cv_func_connect" >&6; } + + if test $ac_cv_func_connect = no; then +- { $as_echo "$as_me:$LINENO: checking for connect in -lsocket" >&5 +-$as_echo_n "checking for connect in -lsocket... " >&6; } ++ { echo "$as_me:$LINENO: checking for connect in -lsocket" >&5 ++echo $ECHO_N "checking for connect in -lsocket... $ECHO_C" >&6; } + if test "${ac_cv_lib_socket_connect+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lsocket $X_EXTRA_LIBS $LIBS" +@@ -24825,36 +24510,32 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_socket_connect=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_socket_connect=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_socket_connect" >&5 +-$as_echo "$ac_cv_lib_socket_connect" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_socket_connect" >&5 ++echo "${ECHO_T}$ac_cv_lib_socket_connect" >&6; } + if test $ac_cv_lib_socket_connect = yes; then + X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS" + fi +@@ -24862,10 +24543,10 @@ + fi + + # Guillermo Gomez says -lposix is necessary on A/UX. +- { $as_echo "$as_me:$LINENO: checking for remove" >&5 +-$as_echo_n "checking for remove... " >&6; } ++ { echo "$as_me:$LINENO: checking for remove" >&5 ++echo $ECHO_N "checking for remove... $ECHO_C" >&6; } + if test "${ac_cv_func_remove+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -24918,41 +24599,37 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_func_remove=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_func_remove=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_remove" >&5 +-$as_echo "$ac_cv_func_remove" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_func_remove" >&5 ++echo "${ECHO_T}$ac_cv_func_remove" >&6; } + + if test $ac_cv_func_remove = no; then +- { $as_echo "$as_me:$LINENO: checking for remove in -lposix" >&5 +-$as_echo_n "checking for remove in -lposix... " >&6; } ++ { echo "$as_me:$LINENO: checking for remove in -lposix" >&5 ++echo $ECHO_N "checking for remove in -lposix... $ECHO_C" >&6; } + if test "${ac_cv_lib_posix_remove+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lposix $LIBS" +@@ -24984,36 +24661,32 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_posix_remove=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_posix_remove=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_posix_remove" >&5 +-$as_echo "$ac_cv_lib_posix_remove" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_posix_remove" >&5 ++echo "${ECHO_T}$ac_cv_lib_posix_remove" >&6; } + if test $ac_cv_lib_posix_remove = yes; then + X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix" + fi +@@ -25021,10 +24694,10 @@ + fi + + # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. +- { $as_echo "$as_me:$LINENO: checking for shmat" >&5 +-$as_echo_n "checking for shmat... " >&6; } ++ { echo "$as_me:$LINENO: checking for shmat" >&5 ++echo $ECHO_N "checking for shmat... $ECHO_C" >&6; } + if test "${ac_cv_func_shmat+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -25077,41 +24750,37 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_func_shmat=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_func_shmat=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_shmat" >&5 +-$as_echo "$ac_cv_func_shmat" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_func_shmat" >&5 ++echo "${ECHO_T}$ac_cv_func_shmat" >&6; } + + if test $ac_cv_func_shmat = no; then +- { $as_echo "$as_me:$LINENO: checking for shmat in -lipc" >&5 +-$as_echo_n "checking for shmat in -lipc... " >&6; } ++ { echo "$as_me:$LINENO: checking for shmat in -lipc" >&5 ++echo $ECHO_N "checking for shmat in -lipc... $ECHO_C" >&6; } + if test "${ac_cv_lib_ipc_shmat+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lipc $LIBS" +@@ -25143,36 +24812,32 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_ipc_shmat=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_ipc_shmat=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_ipc_shmat" >&5 +-$as_echo "$ac_cv_lib_ipc_shmat" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_ipc_shmat" >&5 ++echo "${ECHO_T}$ac_cv_lib_ipc_shmat" >&6; } + if test $ac_cv_lib_ipc_shmat = yes; then + X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc" + fi +@@ -25189,10 +24854,10 @@ + # These have to be linked with before -lX11, unlike the other + # libraries we check for below, so use a different variable. + # John Interrante, Karl Berry +- { $as_echo "$as_me:$LINENO: checking for IceConnectionNumber in -lICE" >&5 +-$as_echo_n "checking for IceConnectionNumber in -lICE... " >&6; } ++ { echo "$as_me:$LINENO: checking for IceConnectionNumber in -lICE" >&5 ++echo $ECHO_N "checking for IceConnectionNumber in -lICE... $ECHO_C" >&6; } + if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lICE $X_EXTRA_LIBS $LIBS" +@@ -25224,36 +24889,32 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_ICE_IceConnectionNumber=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_ICE_IceConnectionNumber=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5 +-$as_echo "$ac_cv_lib_ICE_IceConnectionNumber" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5 ++echo "${ECHO_T}$ac_cv_lib_ICE_IceConnectionNumber" >&6; } + if test $ac_cv_lib_ICE_IceConnectionNumber = yes; then + X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE" + fi +@@ -25264,10 +24925,10 @@ + + x_libs="$X_PRE_LIBS $X_LIBS -lX11 $X_EXTRA_LIBS" + +-{ $as_echo "$as_me:$LINENO: checking for XScreenSaverQueryInfo" >&5 +-$as_echo_n "checking for XScreenSaverQueryInfo... " >&6; } ++{ echo "$as_me:$LINENO: checking for XScreenSaverQueryInfo" >&5 ++echo $ECHO_N "checking for XScreenSaverQueryInfo... $ECHO_C" >&6; } + if test "${ac_cv_func_XScreenSaverQueryInfo+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -25320,35 +24981,31 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_func_XScreenSaverQueryInfo=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_func_XScreenSaverQueryInfo=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_XScreenSaverQueryInfo" >&5 +-$as_echo "$ac_cv_func_XScreenSaverQueryInfo" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_func_XScreenSaverQueryInfo" >&5 ++echo "${ECHO_T}$ac_cv_func_XScreenSaverQueryInfo" >&6; } + if test $ac_cv_func_XScreenSaverQueryInfo = yes; then + + TYPING_BREAK="typing-break" +@@ -25356,10 +25013,10 @@ + + save_LIBS=$LIBS + LIBS="$LIBS $X_PRE_LIBS $X_LIBS -lXss -lXext -lX11" +- { $as_echo "$as_me:$LINENO: checking for XScreenSaverQueryInfo in -lXss" >&5 +-$as_echo_n "checking for XScreenSaverQueryInfo in -lXss... " >&6; } ++ { echo "$as_me:$LINENO: checking for XScreenSaverQueryInfo in -lXss" >&5 ++echo $ECHO_N "checking for XScreenSaverQueryInfo in -lXss... $ECHO_C" >&6; } + if test "${ac_cv_lib_Xss_XScreenSaverQueryInfo+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lXss $LIBS" +@@ -25391,36 +25048,32 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_Xss_XScreenSaverQueryInfo=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_Xss_XScreenSaverQueryInfo=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_Xss_XScreenSaverQueryInfo" >&5 +-$as_echo "$ac_cv_lib_Xss_XScreenSaverQueryInfo" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_Xss_XScreenSaverQueryInfo" >&5 ++echo "${ECHO_T}$ac_cv_lib_Xss_XScreenSaverQueryInfo" >&6; } + if test $ac_cv_lib_Xss_XScreenSaverQueryInfo = yes; then + + TYPING_BREAK="typing-break" +@@ -25429,10 +25082,10 @@ + + LIBS=$save_LIBS + LIBS="$LIBS $X_PRE_LIBS $X_LIBS -lXext -lX11" +- { $as_echo "$as_me:$LINENO: checking for XScreenSaverQueryInfo in -lXext" >&5 +-$as_echo_n "checking for XScreenSaverQueryInfo in -lXext... " >&6; } ++ { echo "$as_me:$LINENO: checking for XScreenSaverQueryInfo in -lXext" >&5 ++echo $ECHO_N "checking for XScreenSaverQueryInfo in -lXext... $ECHO_C" >&6; } + if test "${ac_cv_lib_Xext_XScreenSaverQueryInfo+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lXext $LIBS" +@@ -25464,36 +25117,32 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_Xext_XScreenSaverQueryInfo=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_Xext_XScreenSaverQueryInfo=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_Xext_XScreenSaverQueryInfo" >&5 +-$as_echo "$ac_cv_lib_Xext_XScreenSaverQueryInfo" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_Xext_XScreenSaverQueryInfo" >&5 ++echo "${ECHO_T}$ac_cv_lib_Xext_XScreenSaverQueryInfo" >&6; } + if test $ac_cv_lib_Xext_XScreenSaverQueryInfo = yes; then + + TYPING_BREAK="typing-break" +@@ -25522,21 +25171,20 @@ + + for ac_header in X11/Xlib.h + do +-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` + if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +-$as_echo_n "checking for $ac_header... " >&6; } ++ { echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } + if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-ac_res=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + else + # Is the header compilable? +-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-$as_echo_n "checking $ac_header usability... " >&6; } ++{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 ++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -25552,33 +25200,32 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_header_compiler=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_compiler=no + fi + + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-$as_echo "$ac_header_compiler" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-$as_echo_n "checking $ac_header presence... " >&6; } ++{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 ++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -25592,52 +25239,51 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + ac_header_preproc=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no + fi + + rm -f conftest.err conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-$as_echo "$ac_header_preproc" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 ++echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 ++echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +-$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +-$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 ++echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 ++echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 ++echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 ++echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 ++echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 ++echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( cat <<\_ASBOX + ## ----------------------------------------------------------------------------------- ## + ## Report this to http://bugzilla.gnome.org/enter_bug.cgi?product=gnome-control-center ## +@@ -25646,33 +25292,31 @@ + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; + esac +-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +-$as_echo_n "checking for $ac_header... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } + if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + eval "$as_ac_Header=\$ac_header_preproc" + fi +-ac_res=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + + fi +-if test `eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` = yes; then ++if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 + _ACEOF + + fi + + done + +-{ $as_echo "$as_me:$LINENO: checking for XF86MiscQueryExtension in -lXxf86misc" >&5 +-$as_echo_n "checking for XF86MiscQueryExtension in -lXxf86misc... " >&6; } ++{ echo "$as_me:$LINENO: checking for XF86MiscQueryExtension in -lXxf86misc" >&5 ++echo $ECHO_N "checking for XF86MiscQueryExtension in -lXxf86misc... $ECHO_C" >&6; } + if test "${ac_cv_lib_Xxf86misc_XF86MiscQueryExtension+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lXxf86misc $LIBS" +@@ -25704,46 +25348,42 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_Xxf86misc_XF86MiscQueryExtension=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_Xxf86misc_XF86MiscQueryExtension=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_Xxf86misc_XF86MiscQueryExtension" >&5 +-$as_echo "$ac_cv_lib_Xxf86misc_XF86MiscQueryExtension" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_Xxf86misc_XF86MiscQueryExtension" >&5 ++echo "${ECHO_T}$ac_cv_lib_Xxf86misc_XF86MiscQueryExtension" >&6; } + if test $ac_cv_lib_Xxf86misc_XF86MiscQueryExtension = yes; then + + + for ac_header in X11/extensions/xf86misc.h + do +-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +-$as_echo_n "checking for $ac_header... " >&6; } ++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } + if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -25764,21 +25404,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + eval "$as_ac_Header=yes" + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_Header=no" +@@ -25786,14 +25425,12 @@ + + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-ac_res=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } +-if test `eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` = yes; then ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 + _ACEOF + XF86MISC_LIBS="-lXxf86misc" + fi +@@ -25806,21 +25443,20 @@ + + for ac_header in X11/extensions/XKB.h + do +-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` + if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +-$as_echo_n "checking for $ac_header... " >&6; } ++ { echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } + if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-ac_res=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + else + # Is the header compilable? +-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-$as_echo_n "checking $ac_header usability... " >&6; } ++{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 ++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -25836,33 +25472,32 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_header_compiler=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_compiler=no + fi + + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-$as_echo "$ac_header_compiler" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-$as_echo_n "checking $ac_header presence... " >&6; } ++{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 ++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -25876,52 +25511,51 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + ac_header_preproc=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no + fi + + rm -f conftest.err conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-$as_echo "$ac_header_preproc" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 ++echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 ++echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +-$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +-$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 ++echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 ++echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 ++echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 ++echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 ++echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 ++echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( cat <<\_ASBOX + ## ----------------------------------------------------------------------------------- ## + ## Report this to http://bugzilla.gnome.org/enter_bug.cgi?product=gnome-control-center ## +@@ -25930,23 +25564,21 @@ + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; + esac +-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +-$as_echo_n "checking for $ac_header... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } + if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + eval "$as_ac_Header=\$ac_header_preproc" + fi +-ac_res=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + + fi +-if test `eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` = yes; then ++if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 + _ACEOF + + fi +@@ -25969,40 +25601,44 @@ + COMMON_MODULES="gtk+-2.0 >= 2.11.6 glib-2.0 >= 2.17.4 gio-2.0 gconf-2.0 libgnomeui-2.0 >= 2.2.0 libglade-2.0 >= 2.0.0 gnome-desktop-2.0 >= 2.23.90" + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for LIBSLAB" >&5 +-$as_echo_n "checking for LIBSLAB... " >&6; } ++{ echo "$as_me:$LINENO: checking for LIBSLAB" >&5 ++echo $ECHO_N "checking for LIBSLAB... $ECHO_C" >&6; } + +-if test -n "$LIBSLAB_CFLAGS"; then +- pkg_cv_LIBSLAB_CFLAGS="$LIBSLAB_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$COMMON_MODULES gnome-desktop-2.0 librsvg-2.0 libgnome-menu pango eel-2.0\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$LIBSLAB_CFLAGS"; then ++ pkg_cv_LIBSLAB_CFLAGS="$LIBSLAB_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$COMMON_MODULES gnome-desktop-2.0 librsvg-2.0 libgnome-menu pango eel-2.0\"") >&5 + ($PKG_CONFIG --exists --print-errors "$COMMON_MODULES gnome-desktop-2.0 librsvg-2.0 libgnome-menu pango eel-2.0") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_LIBSLAB_CFLAGS=`$PKG_CONFIG --cflags "$COMMON_MODULES gnome-desktop-2.0 librsvg-2.0 libgnome-menu pango eel-2.0" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi +-if test -n "$LIBSLAB_LIBS"; then +- pkg_cv_LIBSLAB_LIBS="$LIBSLAB_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$COMMON_MODULES gnome-desktop-2.0 librsvg-2.0 libgnome-menu pango eel-2.0\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$LIBSLAB_LIBS"; then ++ pkg_cv_LIBSLAB_LIBS="$LIBSLAB_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$COMMON_MODULES gnome-desktop-2.0 librsvg-2.0 libgnome-menu pango eel-2.0\"") >&5 + ($PKG_CONFIG --exists --print-errors "$COMMON_MODULES gnome-desktop-2.0 librsvg-2.0 libgnome-menu pango eel-2.0") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_LIBSLAB_LIBS=`$PKG_CONFIG --libs "$COMMON_MODULES gnome-desktop-2.0 librsvg-2.0 libgnome-menu pango eel-2.0" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi + + +@@ -26015,14 +25651,14 @@ + _pkg_short_errors_supported=no + fi + if test $_pkg_short_errors_supported = yes; then +- LIBSLAB_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$COMMON_MODULES gnome-desktop-2.0 librsvg-2.0 libgnome-menu pango eel-2.0" 2>&1` ++ LIBSLAB_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$COMMON_MODULES gnome-desktop-2.0 librsvg-2.0 libgnome-menu pango eel-2.0"` + else +- LIBSLAB_PKG_ERRORS=`$PKG_CONFIG --print-errors "$COMMON_MODULES gnome-desktop-2.0 librsvg-2.0 libgnome-menu pango eel-2.0" 2>&1` ++ LIBSLAB_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$COMMON_MODULES gnome-desktop-2.0 librsvg-2.0 libgnome-menu pango eel-2.0"` + fi + # Put the nasty error message in config.log where it belongs + echo "$LIBSLAB_PKG_ERRORS" >&5 + +- { { $as_echo "$as_me:$LINENO: error: Package requirements ($COMMON_MODULES gnome-desktop-2.0 librsvg-2.0 libgnome-menu pango eel-2.0) were not met: ++ { { echo "$as_me:$LINENO: error: Package requirements ($COMMON_MODULES gnome-desktop-2.0 librsvg-2.0 libgnome-menu pango eel-2.0) were not met: + + $LIBSLAB_PKG_ERRORS + +@@ -26033,7 +25669,7 @@ + and LIBSLAB_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. + " >&5 +-$as_echo "$as_me: error: Package requirements ($COMMON_MODULES gnome-desktop-2.0 librsvg-2.0 libgnome-menu pango eel-2.0) were not met: ++echo "$as_me: error: Package requirements ($COMMON_MODULES gnome-desktop-2.0 librsvg-2.0 libgnome-menu pango eel-2.0) were not met: + + $LIBSLAB_PKG_ERRORS + +@@ -26046,7 +25682,7 @@ + " >&2;} + { (exit 1); exit 1; }; } + elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -26056,7 +25692,7 @@ + + To get pkg-config, see . + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -26070,46 +25706,50 @@ + else + LIBSLAB_CFLAGS=$pkg_cv_LIBSLAB_CFLAGS + LIBSLAB_LIBS=$pkg_cv_LIBSLAB_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + : + fi + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for CAPPLET" >&5 +-$as_echo_n "checking for CAPPLET... " >&6; } ++{ echo "$as_me:$LINENO: checking for CAPPLET" >&5 ++echo $ECHO_N "checking for CAPPLET... $ECHO_C" >&6; } + +-if test -n "$CAPPLET_CFLAGS"; then +- pkg_cv_CAPPLET_CFLAGS="$CAPPLET_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$COMMON_MODULES\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$CAPPLET_CFLAGS"; then ++ pkg_cv_CAPPLET_CFLAGS="$CAPPLET_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$COMMON_MODULES\"") >&5 + ($PKG_CONFIG --exists --print-errors "$COMMON_MODULES") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_CAPPLET_CFLAGS=`$PKG_CONFIG --cflags "$COMMON_MODULES" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi +-if test -n "$CAPPLET_LIBS"; then +- pkg_cv_CAPPLET_LIBS="$CAPPLET_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$COMMON_MODULES\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$CAPPLET_LIBS"; then ++ pkg_cv_CAPPLET_LIBS="$CAPPLET_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$COMMON_MODULES\"") >&5 + ($PKG_CONFIG --exists --print-errors "$COMMON_MODULES") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_CAPPLET_LIBS=`$PKG_CONFIG --libs "$COMMON_MODULES" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi + + +@@ -26122,14 +25762,14 @@ + _pkg_short_errors_supported=no + fi + if test $_pkg_short_errors_supported = yes; then +- CAPPLET_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$COMMON_MODULES" 2>&1` ++ CAPPLET_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$COMMON_MODULES"` + else +- CAPPLET_PKG_ERRORS=`$PKG_CONFIG --print-errors "$COMMON_MODULES" 2>&1` ++ CAPPLET_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$COMMON_MODULES"` + fi + # Put the nasty error message in config.log where it belongs + echo "$CAPPLET_PKG_ERRORS" >&5 + +- { { $as_echo "$as_me:$LINENO: error: Package requirements ($COMMON_MODULES) were not met: ++ { { echo "$as_me:$LINENO: error: Package requirements ($COMMON_MODULES) were not met: + + $CAPPLET_PKG_ERRORS + +@@ -26140,7 +25780,7 @@ + and CAPPLET_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. + " >&5 +-$as_echo "$as_me: error: Package requirements ($COMMON_MODULES) were not met: ++echo "$as_me: error: Package requirements ($COMMON_MODULES) were not met: + + $CAPPLET_PKG_ERRORS + +@@ -26153,7 +25793,7 @@ + " >&2;} + { (exit 1); exit 1; }; } + elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -26163,7 +25803,7 @@ + + To get pkg-config, see . + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -26177,46 +25817,50 @@ + else + CAPPLET_CFLAGS=$pkg_cv_CAPPLET_CFLAGS + CAPPLET_LIBS=$pkg_cv_CAPPLET_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + : + fi + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for GNOMECC" >&5 +-$as_echo_n "checking for GNOMECC... " >&6; } ++{ echo "$as_me:$LINENO: checking for GNOMECC" >&5 ++echo $ECHO_N "checking for GNOMECC... $ECHO_C" >&6; } + +-if test -n "$GNOMECC_CFLAGS"; then +- pkg_cv_GNOMECC_CFLAGS="$GNOMECC_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$COMMON_MODULES libgnome-menu >= 2.10.1 libpanelapplet-2.0\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GNOMECC_CFLAGS"; then ++ pkg_cv_GNOMECC_CFLAGS="$GNOMECC_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$COMMON_MODULES libgnome-menu >= 2.10.1 libpanelapplet-2.0\"") >&5 + ($PKG_CONFIG --exists --print-errors "$COMMON_MODULES libgnome-menu >= 2.10.1 libpanelapplet-2.0") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_GNOMECC_CFLAGS=`$PKG_CONFIG --cflags "$COMMON_MODULES libgnome-menu >= 2.10.1 libpanelapplet-2.0" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi +-if test -n "$GNOMECC_LIBS"; then +- pkg_cv_GNOMECC_LIBS="$GNOMECC_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$COMMON_MODULES libgnome-menu >= 2.10.1 libpanelapplet-2.0\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GNOMECC_LIBS"; then ++ pkg_cv_GNOMECC_LIBS="$GNOMECC_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$COMMON_MODULES libgnome-menu >= 2.10.1 libpanelapplet-2.0\"") >&5 + ($PKG_CONFIG --exists --print-errors "$COMMON_MODULES libgnome-menu >= 2.10.1 libpanelapplet-2.0") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_GNOMECC_LIBS=`$PKG_CONFIG --libs "$COMMON_MODULES libgnome-menu >= 2.10.1 libpanelapplet-2.0" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi + + +@@ -26229,14 +25873,14 @@ + _pkg_short_errors_supported=no + fi + if test $_pkg_short_errors_supported = yes; then +- GNOMECC_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$COMMON_MODULES libgnome-menu >= 2.10.1 libpanelapplet-2.0" 2>&1` ++ GNOMECC_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$COMMON_MODULES libgnome-menu >= 2.10.1 libpanelapplet-2.0"` + else +- GNOMECC_PKG_ERRORS=`$PKG_CONFIG --print-errors "$COMMON_MODULES libgnome-menu >= 2.10.1 libpanelapplet-2.0" 2>&1` ++ GNOMECC_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$COMMON_MODULES libgnome-menu >= 2.10.1 libpanelapplet-2.0"` + fi + # Put the nasty error message in config.log where it belongs + echo "$GNOMECC_PKG_ERRORS" >&5 + +- { { $as_echo "$as_me:$LINENO: error: Package requirements ($COMMON_MODULES libgnome-menu >= 2.10.1 libpanelapplet-2.0) were not met: ++ { { echo "$as_me:$LINENO: error: Package requirements ($COMMON_MODULES libgnome-menu >= 2.10.1 libpanelapplet-2.0) were not met: + + $GNOMECC_PKG_ERRORS + +@@ -26247,7 +25891,7 @@ + and GNOMECC_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. + " >&5 +-$as_echo "$as_me: error: Package requirements ($COMMON_MODULES libgnome-menu >= 2.10.1 libpanelapplet-2.0) were not met: ++echo "$as_me: error: Package requirements ($COMMON_MODULES libgnome-menu >= 2.10.1 libpanelapplet-2.0) were not met: + + $GNOMECC_PKG_ERRORS + +@@ -26260,7 +25904,7 @@ + " >&2;} + { (exit 1); exit 1; }; } + elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -26270,7 +25914,7 @@ + + To get pkg-config, see . + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -26284,46 +25928,50 @@ + else + GNOMECC_CFLAGS=$pkg_cv_GNOMECC_CFLAGS + GNOMECC_LIBS=$pkg_cv_GNOMECC_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + : + fi + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for GNOME" >&5 +-$as_echo_n "checking for GNOME... " >&6; } ++{ echo "$as_me:$LINENO: checking for GNOME" >&5 ++echo $ECHO_N "checking for GNOME... $ECHO_C" >&6; } + +-if test -n "$GNOME_CFLAGS"; then +- pkg_cv_GNOME_CFLAGS="$GNOME_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libgnomeui-2.0\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GNOME_CFLAGS"; then ++ pkg_cv_GNOME_CFLAGS="$GNOME_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libgnomeui-2.0\"") >&5 + ($PKG_CONFIG --exists --print-errors "libgnomeui-2.0") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_GNOME_CFLAGS=`$PKG_CONFIG --cflags "libgnomeui-2.0" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi +-if test -n "$GNOME_LIBS"; then +- pkg_cv_GNOME_LIBS="$GNOME_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libgnomeui-2.0\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GNOME_LIBS"; then ++ pkg_cv_GNOME_LIBS="$GNOME_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libgnomeui-2.0\"") >&5 + ($PKG_CONFIG --exists --print-errors "libgnomeui-2.0") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_GNOME_LIBS=`$PKG_CONFIG --libs "libgnomeui-2.0" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi + + +@@ -26336,14 +25984,14 @@ + _pkg_short_errors_supported=no + fi + if test $_pkg_short_errors_supported = yes; then +- GNOME_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "libgnomeui-2.0" 2>&1` ++ GNOME_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "libgnomeui-2.0"` + else +- GNOME_PKG_ERRORS=`$PKG_CONFIG --print-errors "libgnomeui-2.0" 2>&1` ++ GNOME_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libgnomeui-2.0"` + fi + # Put the nasty error message in config.log where it belongs + echo "$GNOME_PKG_ERRORS" >&5 + +- { { $as_echo "$as_me:$LINENO: error: Package requirements (libgnomeui-2.0) were not met: ++ { { echo "$as_me:$LINENO: error: Package requirements (libgnomeui-2.0) were not met: + + $GNOME_PKG_ERRORS + +@@ -26354,7 +26002,7 @@ + and GNOME_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. + " >&5 +-$as_echo "$as_me: error: Package requirements (libgnomeui-2.0) were not met: ++echo "$as_me: error: Package requirements (libgnomeui-2.0) were not met: + + $GNOME_PKG_ERRORS + +@@ -26367,7 +26015,7 @@ + " >&2;} + { (exit 1); exit 1; }; } + elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -26377,7 +26025,7 @@ + + To get pkg-config, see . + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -26391,46 +26039,50 @@ + else + GNOME_CFLAGS=$pkg_cv_GNOME_CFLAGS + GNOME_LIBS=$pkg_cv_GNOME_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + : + fi + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for DBUS" >&5 +-$as_echo_n "checking for DBUS... " >&6; } ++{ echo "$as_me:$LINENO: checking for DBUS" >&5 ++echo $ECHO_N "checking for DBUS... $ECHO_C" >&6; } + +-if test -n "$DBUS_CFLAGS"; then +- pkg_cv_DBUS_CFLAGS="$DBUS_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"dbus-1 dbus-glib-1\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$DBUS_CFLAGS"; then ++ pkg_cv_DBUS_CFLAGS="$DBUS_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"dbus-1 dbus-glib-1\"") >&5 + ($PKG_CONFIG --exists --print-errors "dbus-1 dbus-glib-1") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_DBUS_CFLAGS=`$PKG_CONFIG --cflags "dbus-1 dbus-glib-1" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi +-if test -n "$DBUS_LIBS"; then +- pkg_cv_DBUS_LIBS="$DBUS_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"dbus-1 dbus-glib-1\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$DBUS_LIBS"; then ++ pkg_cv_DBUS_LIBS="$DBUS_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"dbus-1 dbus-glib-1\"") >&5 + ($PKG_CONFIG --exists --print-errors "dbus-1 dbus-glib-1") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_DBUS_LIBS=`$PKG_CONFIG --libs "dbus-1 dbus-glib-1" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi + + +@@ -26443,14 +26095,14 @@ + _pkg_short_errors_supported=no + fi + if test $_pkg_short_errors_supported = yes; then +- DBUS_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "dbus-1 dbus-glib-1" 2>&1` ++ DBUS_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "dbus-1 dbus-glib-1"` + else +- DBUS_PKG_ERRORS=`$PKG_CONFIG --print-errors "dbus-1 dbus-glib-1" 2>&1` ++ DBUS_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "dbus-1 dbus-glib-1"` + fi + # Put the nasty error message in config.log where it belongs + echo "$DBUS_PKG_ERRORS" >&5 + +- { { $as_echo "$as_me:$LINENO: error: Package requirements (dbus-1 dbus-glib-1) were not met: ++ { { echo "$as_me:$LINENO: error: Package requirements (dbus-1 dbus-glib-1) were not met: + + $DBUS_PKG_ERRORS + +@@ -26461,7 +26113,7 @@ + and DBUS_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. + " >&5 +-$as_echo "$as_me: error: Package requirements (dbus-1 dbus-glib-1) were not met: ++echo "$as_me: error: Package requirements (dbus-1 dbus-glib-1) were not met: + + $DBUS_PKG_ERRORS + +@@ -26474,7 +26126,7 @@ + " >&2;} + { (exit 1); exit 1; }; } + elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -26484,7 +26136,7 @@ + + To get pkg-config, see . + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -26498,46 +26150,50 @@ + else + DBUS_CFLAGS=$pkg_cv_DBUS_CFLAGS + DBUS_LIBS=$pkg_cv_DBUS_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + : + fi + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for GNOME_DESKTOP" >&5 +-$as_echo_n "checking for GNOME_DESKTOP... " >&6; } ++{ echo "$as_me:$LINENO: checking for GNOME_DESKTOP" >&5 ++echo $ECHO_N "checking for GNOME_DESKTOP... $ECHO_C" >&6; } + +-if test -n "$GNOME_DESKTOP_CFLAGS"; then +- pkg_cv_GNOME_DESKTOP_CFLAGS="$GNOME_DESKTOP_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gnome-desktop-2.0\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GNOME_DESKTOP_CFLAGS"; then ++ pkg_cv_GNOME_DESKTOP_CFLAGS="$GNOME_DESKTOP_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gnome-desktop-2.0\"") >&5 + ($PKG_CONFIG --exists --print-errors "gnome-desktop-2.0") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_GNOME_DESKTOP_CFLAGS=`$PKG_CONFIG --cflags "gnome-desktop-2.0" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi +-if test -n "$GNOME_DESKTOP_LIBS"; then +- pkg_cv_GNOME_DESKTOP_LIBS="$GNOME_DESKTOP_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gnome-desktop-2.0\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GNOME_DESKTOP_LIBS"; then ++ pkg_cv_GNOME_DESKTOP_LIBS="$GNOME_DESKTOP_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gnome-desktop-2.0\"") >&5 + ($PKG_CONFIG --exists --print-errors "gnome-desktop-2.0") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_GNOME_DESKTOP_LIBS=`$PKG_CONFIG --libs "gnome-desktop-2.0" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi + + +@@ -26550,14 +26206,14 @@ + _pkg_short_errors_supported=no + fi + if test $_pkg_short_errors_supported = yes; then +- GNOME_DESKTOP_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "gnome-desktop-2.0" 2>&1` ++ GNOME_DESKTOP_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "gnome-desktop-2.0"` + else +- GNOME_DESKTOP_PKG_ERRORS=`$PKG_CONFIG --print-errors "gnome-desktop-2.0" 2>&1` ++ GNOME_DESKTOP_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "gnome-desktop-2.0"` + fi + # Put the nasty error message in config.log where it belongs + echo "$GNOME_DESKTOP_PKG_ERRORS" >&5 + +- { { $as_echo "$as_me:$LINENO: error: Package requirements (gnome-desktop-2.0) were not met: ++ { { echo "$as_me:$LINENO: error: Package requirements (gnome-desktop-2.0) were not met: + + $GNOME_DESKTOP_PKG_ERRORS + +@@ -26568,7 +26224,7 @@ + and GNOME_DESKTOP_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. + " >&5 +-$as_echo "$as_me: error: Package requirements (gnome-desktop-2.0) were not met: ++echo "$as_me: error: Package requirements (gnome-desktop-2.0) were not met: + + $GNOME_DESKTOP_PKG_ERRORS + +@@ -26581,7 +26237,7 @@ + " >&2;} + { (exit 1); exit 1; }; } + elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -26591,7 +26247,7 @@ + + To get pkg-config, see . + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -26605,46 +26261,50 @@ + else + GNOME_DESKTOP_CFLAGS=$pkg_cv_GNOME_DESKTOP_CFLAGS + GNOME_DESKTOP_LIBS=$pkg_cv_GNOME_DESKTOP_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + : + fi + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for DEFAULT_APPLICATIONS_CAPPLET" >&5 +-$as_echo_n "checking for DEFAULT_APPLICATIONS_CAPPLET... " >&6; } ++{ echo "$as_me:$LINENO: checking for DEFAULT_APPLICATIONS_CAPPLET" >&5 ++echo $ECHO_N "checking for DEFAULT_APPLICATIONS_CAPPLET... $ECHO_C" >&6; } + +-if test -n "$DEFAULT_APPLICATIONS_CAPPLET_CFLAGS"; then +- pkg_cv_DEFAULT_APPLICATIONS_CAPPLET_CFLAGS="$DEFAULT_APPLICATIONS_CAPPLET_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libxml-2.0\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$DEFAULT_APPLICATIONS_CAPPLET_CFLAGS"; then ++ pkg_cv_DEFAULT_APPLICATIONS_CAPPLET_CFLAGS="$DEFAULT_APPLICATIONS_CAPPLET_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libxml-2.0\"") >&5 + ($PKG_CONFIG --exists --print-errors "libxml-2.0") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_DEFAULT_APPLICATIONS_CAPPLET_CFLAGS=`$PKG_CONFIG --cflags "libxml-2.0" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi +-if test -n "$DEFAULT_APPLICATIONS_CAPPLET_LIBS"; then +- pkg_cv_DEFAULT_APPLICATIONS_CAPPLET_LIBS="$DEFAULT_APPLICATIONS_CAPPLET_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libxml-2.0\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$DEFAULT_APPLICATIONS_CAPPLET_LIBS"; then ++ pkg_cv_DEFAULT_APPLICATIONS_CAPPLET_LIBS="$DEFAULT_APPLICATIONS_CAPPLET_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libxml-2.0\"") >&5 + ($PKG_CONFIG --exists --print-errors "libxml-2.0") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_DEFAULT_APPLICATIONS_CAPPLET_LIBS=`$PKG_CONFIG --libs "libxml-2.0" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi + + +@@ -26657,14 +26317,14 @@ + _pkg_short_errors_supported=no + fi + if test $_pkg_short_errors_supported = yes; then +- DEFAULT_APPLICATIONS_CAPPLET_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "libxml-2.0" 2>&1` ++ DEFAULT_APPLICATIONS_CAPPLET_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "libxml-2.0"` + else +- DEFAULT_APPLICATIONS_CAPPLET_PKG_ERRORS=`$PKG_CONFIG --print-errors "libxml-2.0" 2>&1` ++ DEFAULT_APPLICATIONS_CAPPLET_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libxml-2.0"` + fi + # Put the nasty error message in config.log where it belongs + echo "$DEFAULT_APPLICATIONS_CAPPLET_PKG_ERRORS" >&5 + +- { { $as_echo "$as_me:$LINENO: error: Package requirements (libxml-2.0) were not met: ++ { { echo "$as_me:$LINENO: error: Package requirements (libxml-2.0) were not met: + + $DEFAULT_APPLICATIONS_CAPPLET_PKG_ERRORS + +@@ -26675,7 +26335,7 @@ + and DEFAULT_APPLICATIONS_CAPPLET_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. + " >&5 +-$as_echo "$as_me: error: Package requirements (libxml-2.0) were not met: ++echo "$as_me: error: Package requirements (libxml-2.0) were not met: + + $DEFAULT_APPLICATIONS_CAPPLET_PKG_ERRORS + +@@ -26688,7 +26348,7 @@ + " >&2;} + { (exit 1); exit 1; }; } + elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -26698,7 +26358,7 @@ + + To get pkg-config, see . + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -26712,46 +26372,50 @@ + else + DEFAULT_APPLICATIONS_CAPPLET_CFLAGS=$pkg_cv_DEFAULT_APPLICATIONS_CAPPLET_CFLAGS + DEFAULT_APPLICATIONS_CAPPLET_LIBS=$pkg_cv_DEFAULT_APPLICATIONS_CAPPLET_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + : + fi + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for METACITY" >&5 +-$as_echo_n "checking for METACITY... " >&6; } ++{ echo "$as_me:$LINENO: checking for METACITY" >&5 ++echo $ECHO_N "checking for METACITY... $ECHO_C" >&6; } + +-if test -n "$METACITY_CFLAGS"; then +- pkg_cv_METACITY_CFLAGS="$METACITY_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libmetacity-private >= 2.23.1\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$METACITY_CFLAGS"; then ++ pkg_cv_METACITY_CFLAGS="$METACITY_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libmetacity-private >= 2.23.1\"") >&5 + ($PKG_CONFIG --exists --print-errors "libmetacity-private >= 2.23.1") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_METACITY_CFLAGS=`$PKG_CONFIG --cflags "libmetacity-private >= 2.23.1" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi +-if test -n "$METACITY_LIBS"; then +- pkg_cv_METACITY_LIBS="$METACITY_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libmetacity-private >= 2.23.1\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$METACITY_LIBS"; then ++ pkg_cv_METACITY_LIBS="$METACITY_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libmetacity-private >= 2.23.1\"") >&5 + ($PKG_CONFIG --exists --print-errors "libmetacity-private >= 2.23.1") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_METACITY_LIBS=`$PKG_CONFIG --libs "libmetacity-private >= 2.23.1" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi + + +@@ -26764,14 +26428,14 @@ + _pkg_short_errors_supported=no + fi + if test $_pkg_short_errors_supported = yes; then +- METACITY_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "libmetacity-private >= 2.23.1" 2>&1` ++ METACITY_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "libmetacity-private >= 2.23.1"` + else +- METACITY_PKG_ERRORS=`$PKG_CONFIG --print-errors "libmetacity-private >= 2.23.1" 2>&1` ++ METACITY_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libmetacity-private >= 2.23.1"` + fi + # Put the nasty error message in config.log where it belongs + echo "$METACITY_PKG_ERRORS" >&5 + +- { { $as_echo "$as_me:$LINENO: error: Package requirements (libmetacity-private >= 2.23.1) were not met: ++ { { echo "$as_me:$LINENO: error: Package requirements (libmetacity-private >= 2.23.1) were not met: + + $METACITY_PKG_ERRORS + +@@ -26782,7 +26446,7 @@ + and METACITY_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. + " >&5 +-$as_echo "$as_me: error: Package requirements (libmetacity-private >= 2.23.1) were not met: ++echo "$as_me: error: Package requirements (libmetacity-private >= 2.23.1) were not met: + + $METACITY_PKG_ERRORS + +@@ -26795,7 +26459,7 @@ + " >&2;} + { (exit 1); exit 1; }; } + elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -26805,7 +26469,7 @@ + + To get pkg-config, see . + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -26819,46 +26483,50 @@ + else + METACITY_CFLAGS=$pkg_cv_METACITY_CFLAGS + METACITY_LIBS=$pkg_cv_METACITY_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + : + fi + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for TYPING" >&5 +-$as_echo_n "checking for TYPING... " >&6; } ++{ echo "$as_me:$LINENO: checking for TYPING" >&5 ++echo $ECHO_N "checking for TYPING... $ECHO_C" >&6; } + +-if test -n "$TYPING_CFLAGS"; then +- pkg_cv_TYPING_CFLAGS="$TYPING_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0 > 2.11 gconf-2.0 gtk+-2.0\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$TYPING_CFLAGS"; then ++ pkg_cv_TYPING_CFLAGS="$TYPING_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0 > 2.11 gconf-2.0 gtk+-2.0\"") >&5 + ($PKG_CONFIG --exists --print-errors "glib-2.0 > 2.11 gconf-2.0 gtk+-2.0") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_TYPING_CFLAGS=`$PKG_CONFIG --cflags "glib-2.0 > 2.11 gconf-2.0 gtk+-2.0" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi +-if test -n "$TYPING_LIBS"; then +- pkg_cv_TYPING_LIBS="$TYPING_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0 > 2.11 gconf-2.0 gtk+-2.0\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$TYPING_LIBS"; then ++ pkg_cv_TYPING_LIBS="$TYPING_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0 > 2.11 gconf-2.0 gtk+-2.0\"") >&5 + ($PKG_CONFIG --exists --print-errors "glib-2.0 > 2.11 gconf-2.0 gtk+-2.0") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_TYPING_LIBS=`$PKG_CONFIG --libs "glib-2.0 > 2.11 gconf-2.0 gtk+-2.0" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi + + +@@ -26871,14 +26539,14 @@ + _pkg_short_errors_supported=no + fi + if test $_pkg_short_errors_supported = yes; then +- TYPING_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "glib-2.0 > 2.11 gconf-2.0 gtk+-2.0" 2>&1` ++ TYPING_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "glib-2.0 > 2.11 gconf-2.0 gtk+-2.0"` + else +- TYPING_PKG_ERRORS=`$PKG_CONFIG --print-errors "glib-2.0 > 2.11 gconf-2.0 gtk+-2.0" 2>&1` ++ TYPING_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "glib-2.0 > 2.11 gconf-2.0 gtk+-2.0"` + fi + # Put the nasty error message in config.log where it belongs + echo "$TYPING_PKG_ERRORS" >&5 + +- { { $as_echo "$as_me:$LINENO: error: Package requirements (glib-2.0 > 2.11 gconf-2.0 gtk+-2.0) were not met: ++ { { echo "$as_me:$LINENO: error: Package requirements (glib-2.0 > 2.11 gconf-2.0 gtk+-2.0) were not met: + + $TYPING_PKG_ERRORS + +@@ -26889,7 +26557,7 @@ + and TYPING_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. + " >&5 +-$as_echo "$as_me: error: Package requirements (glib-2.0 > 2.11 gconf-2.0 gtk+-2.0) were not met: ++echo "$as_me: error: Package requirements (glib-2.0 > 2.11 gconf-2.0 gtk+-2.0) were not met: + + $TYPING_PKG_ERRORS + +@@ -26902,7 +26570,7 @@ + " >&2;} + { (exit 1); exit 1; }; } + elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -26912,7 +26580,7 @@ + + To get pkg-config, see . + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -26926,46 +26594,50 @@ + else + TYPING_CFLAGS=$pkg_cv_TYPING_CFLAGS + TYPING_LIBS=$pkg_cv_TYPING_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + : + fi + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for GSD_DBUS" >&5 +-$as_echo_n "checking for GSD_DBUS... " >&6; } ++{ echo "$as_me:$LINENO: checking for GSD_DBUS" >&5 ++echo $ECHO_N "checking for GSD_DBUS... $ECHO_C" >&6; } + +-if test -n "$GSD_DBUS_CFLAGS"; then +- pkg_cv_GSD_DBUS_CFLAGS="$GSD_DBUS_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gnome-settings-daemon\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GSD_DBUS_CFLAGS"; then ++ pkg_cv_GSD_DBUS_CFLAGS="$GSD_DBUS_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gnome-settings-daemon\"") >&5 + ($PKG_CONFIG --exists --print-errors "gnome-settings-daemon") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_GSD_DBUS_CFLAGS=`$PKG_CONFIG --cflags "gnome-settings-daemon" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi +-if test -n "$GSD_DBUS_LIBS"; then +- pkg_cv_GSD_DBUS_LIBS="$GSD_DBUS_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gnome-settings-daemon\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GSD_DBUS_LIBS"; then ++ pkg_cv_GSD_DBUS_LIBS="$GSD_DBUS_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gnome-settings-daemon\"") >&5 + ($PKG_CONFIG --exists --print-errors "gnome-settings-daemon") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_GSD_DBUS_LIBS=`$PKG_CONFIG --libs "gnome-settings-daemon" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi + + +@@ -26978,14 +26650,14 @@ + _pkg_short_errors_supported=no + fi + if test $_pkg_short_errors_supported = yes; then +- GSD_DBUS_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "gnome-settings-daemon" 2>&1` ++ GSD_DBUS_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "gnome-settings-daemon"` + else +- GSD_DBUS_PKG_ERRORS=`$PKG_CONFIG --print-errors "gnome-settings-daemon" 2>&1` ++ GSD_DBUS_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "gnome-settings-daemon"` + fi + # Put the nasty error message in config.log where it belongs + echo "$GSD_DBUS_PKG_ERRORS" >&5 + +- { { $as_echo "$as_me:$LINENO: error: Package requirements (gnome-settings-daemon) were not met: ++ { { echo "$as_me:$LINENO: error: Package requirements (gnome-settings-daemon) were not met: + + $GSD_DBUS_PKG_ERRORS + +@@ -26996,7 +26668,7 @@ + and GSD_DBUS_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. + " >&5 +-$as_echo "$as_me: error: Package requirements (gnome-settings-daemon) were not met: ++echo "$as_me: error: Package requirements (gnome-settings-daemon) were not met: + + $GSD_DBUS_PKG_ERRORS + +@@ -27009,7 +26681,7 @@ + " >&2;} + { (exit 1); exit 1; }; } + elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -27019,7 +26691,7 @@ + + To get pkg-config, see . + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -27033,46 +26705,50 @@ + else + GSD_DBUS_CFLAGS=$pkg_cv_GSD_DBUS_CFLAGS + GSD_DBUS_LIBS=$pkg_cv_GSD_DBUS_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + : + fi + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for GIO" >&5 +-$as_echo_n "checking for GIO... " >&6; } ++{ echo "$as_me:$LINENO: checking for GIO" >&5 ++echo $ECHO_N "checking for GIO... $ECHO_C" >&6; } + +-if test -n "$GIO_CFLAGS"; then +- pkg_cv_GIO_CFLAGS="$GIO_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gio-2.0\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GIO_CFLAGS"; then ++ pkg_cv_GIO_CFLAGS="$GIO_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gio-2.0\"") >&5 + ($PKG_CONFIG --exists --print-errors "gio-2.0") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_GIO_CFLAGS=`$PKG_CONFIG --cflags "gio-2.0" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi +-if test -n "$GIO_LIBS"; then +- pkg_cv_GIO_LIBS="$GIO_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gio-2.0\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GIO_LIBS"; then ++ pkg_cv_GIO_LIBS="$GIO_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gio-2.0\"") >&5 + ($PKG_CONFIG --exists --print-errors "gio-2.0") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_GIO_LIBS=`$PKG_CONFIG --libs "gio-2.0" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi + + +@@ -27085,14 +26761,14 @@ + _pkg_short_errors_supported=no + fi + if test $_pkg_short_errors_supported = yes; then +- GIO_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "gio-2.0" 2>&1` ++ GIO_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "gio-2.0"` + else +- GIO_PKG_ERRORS=`$PKG_CONFIG --print-errors "gio-2.0" 2>&1` ++ GIO_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "gio-2.0"` + fi + # Put the nasty error message in config.log where it belongs + echo "$GIO_PKG_ERRORS" >&5 + +- { { $as_echo "$as_me:$LINENO: error: Package requirements (gio-2.0) were not met: ++ { { echo "$as_me:$LINENO: error: Package requirements (gio-2.0) were not met: + + $GIO_PKG_ERRORS + +@@ -27103,7 +26779,7 @@ + and GIO_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. + " >&5 +-$as_echo "$as_me: error: Package requirements (gio-2.0) were not met: ++echo "$as_me: error: Package requirements (gio-2.0) were not met: + + $GIO_PKG_ERRORS + +@@ -27116,7 +26792,7 @@ + " >&2;} + { (exit 1); exit 1; }; } + elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -27126,7 +26802,7 @@ + + To get pkg-config, see . + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -27140,8 +26816,8 @@ + else + GIO_CFLAGS=$pkg_cv_GIO_CFLAGS + GIO_LIBS=$pkg_cv_GIO_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + : + fi + +@@ -27155,47 +26831,51 @@ + xft_modules="xft" + + cat >>confdefs.h <<\_ACEOF +-#define HAVE_XFT2 /**/ ++#define HAVE_XFT2 + _ACEOF + + fi + + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for FONT_CAPPLET" >&5 +-$as_echo_n "checking for FONT_CAPPLET... " >&6; } ++{ echo "$as_me:$LINENO: checking for FONT_CAPPLET" >&5 ++echo $ECHO_N "checking for FONT_CAPPLET... $ECHO_C" >&6; } + +-if test -n "$FONT_CAPPLET_CFLAGS"; then +- pkg_cv_FONT_CAPPLET_CFLAGS="$FONT_CAPPLET_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$COMMON_MODULES \$xft_modules\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$FONT_CAPPLET_CFLAGS"; then ++ pkg_cv_FONT_CAPPLET_CFLAGS="$FONT_CAPPLET_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$COMMON_MODULES \$xft_modules\"") >&5 + ($PKG_CONFIG --exists --print-errors "$COMMON_MODULES $xft_modules") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_FONT_CAPPLET_CFLAGS=`$PKG_CONFIG --cflags "$COMMON_MODULES $xft_modules" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi +-if test -n "$FONT_CAPPLET_LIBS"; then +- pkg_cv_FONT_CAPPLET_LIBS="$FONT_CAPPLET_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$COMMON_MODULES \$xft_modules\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$FONT_CAPPLET_LIBS"; then ++ pkg_cv_FONT_CAPPLET_LIBS="$FONT_CAPPLET_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$COMMON_MODULES \$xft_modules\"") >&5 + ($PKG_CONFIG --exists --print-errors "$COMMON_MODULES $xft_modules") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_FONT_CAPPLET_LIBS=`$PKG_CONFIG --libs "$COMMON_MODULES $xft_modules" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi + + +@@ -27208,14 +26888,14 @@ + _pkg_short_errors_supported=no + fi + if test $_pkg_short_errors_supported = yes; then +- FONT_CAPPLET_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$COMMON_MODULES $xft_modules" 2>&1` ++ FONT_CAPPLET_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$COMMON_MODULES $xft_modules"` + else +- FONT_CAPPLET_PKG_ERRORS=`$PKG_CONFIG --print-errors "$COMMON_MODULES $xft_modules" 2>&1` ++ FONT_CAPPLET_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$COMMON_MODULES $xft_modules"` + fi + # Put the nasty error message in config.log where it belongs + echo "$FONT_CAPPLET_PKG_ERRORS" >&5 + +- { { $as_echo "$as_me:$LINENO: error: Package requirements ($COMMON_MODULES $xft_modules) were not met: ++ { { echo "$as_me:$LINENO: error: Package requirements ($COMMON_MODULES $xft_modules) were not met: + + $FONT_CAPPLET_PKG_ERRORS + +@@ -27226,7 +26906,7 @@ + and FONT_CAPPLET_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. + " >&5 +-$as_echo "$as_me: error: Package requirements ($COMMON_MODULES $xft_modules) were not met: ++echo "$as_me: error: Package requirements ($COMMON_MODULES $xft_modules) were not met: + + $FONT_CAPPLET_PKG_ERRORS + +@@ -27239,7 +26919,7 @@ + " >&2;} + { (exit 1); exit 1; }; } + elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -27249,7 +26929,7 @@ + + To get pkg-config, see . + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -27263,47 +26943,51 @@ + else + FONT_CAPPLET_CFLAGS=$pkg_cv_FONT_CAPPLET_CFLAGS + FONT_CAPPLET_LIBS=$pkg_cv_FONT_CAPPLET_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + : + fi + + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for AT_CAPPLET" >&5 +-$as_echo_n "checking for AT_CAPPLET... " >&6; } ++{ echo "$as_me:$LINENO: checking for AT_CAPPLET" >&5 ++echo $ECHO_N "checking for AT_CAPPLET... $ECHO_C" >&6; } + +-if test -n "$AT_CAPPLET_CFLAGS"; then +- pkg_cv_AT_CAPPLET_CFLAGS="$AT_CAPPLET_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$COMMON_MODULES\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$AT_CAPPLET_CFLAGS"; then ++ pkg_cv_AT_CAPPLET_CFLAGS="$AT_CAPPLET_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$COMMON_MODULES\"") >&5 + ($PKG_CONFIG --exists --print-errors "$COMMON_MODULES") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_AT_CAPPLET_CFLAGS=`$PKG_CONFIG --cflags "$COMMON_MODULES" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi +-if test -n "$AT_CAPPLET_LIBS"; then +- pkg_cv_AT_CAPPLET_LIBS="$AT_CAPPLET_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$COMMON_MODULES\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$AT_CAPPLET_LIBS"; then ++ pkg_cv_AT_CAPPLET_LIBS="$AT_CAPPLET_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$COMMON_MODULES\"") >&5 + ($PKG_CONFIG --exists --print-errors "$COMMON_MODULES") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_AT_CAPPLET_LIBS=`$PKG_CONFIG --libs "$COMMON_MODULES" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi + + +@@ -27316,14 +27000,14 @@ + _pkg_short_errors_supported=no + fi + if test $_pkg_short_errors_supported = yes; then +- AT_CAPPLET_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$COMMON_MODULES" 2>&1` ++ AT_CAPPLET_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$COMMON_MODULES"` + else +- AT_CAPPLET_PKG_ERRORS=`$PKG_CONFIG --print-errors "$COMMON_MODULES" 2>&1` ++ AT_CAPPLET_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$COMMON_MODULES"` + fi + # Put the nasty error message in config.log where it belongs + echo "$AT_CAPPLET_PKG_ERRORS" >&5 + +- { { $as_echo "$as_me:$LINENO: error: Package requirements ($COMMON_MODULES) were not met: ++ { { echo "$as_me:$LINENO: error: Package requirements ($COMMON_MODULES) were not met: + + $AT_CAPPLET_PKG_ERRORS + +@@ -27334,7 +27018,7 @@ + and AT_CAPPLET_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. + " >&5 +-$as_echo "$as_me: error: Package requirements ($COMMON_MODULES) were not met: ++echo "$as_me: error: Package requirements ($COMMON_MODULES) were not met: + + $AT_CAPPLET_PKG_ERRORS + +@@ -27347,7 +27031,7 @@ + " >&2;} + { (exit 1); exit 1; }; } + elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -27357,7 +27041,7 @@ + + To get pkg-config, see . + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -27371,17 +27055,17 @@ + else + AT_CAPPLET_CFLAGS=$pkg_cv_AT_CAPPLET_CFLAGS + AT_CAPPLET_LIBS=$pkg_cv_AT_CAPPLET_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + : + fi + + + have_randr=no +-{ $as_echo "$as_me:$LINENO: checking for XRRUpdateConfiguration in -lXrandr" >&5 +-$as_echo_n "checking for XRRUpdateConfiguration in -lXrandr... " >&6; } ++{ echo "$as_me:$LINENO: checking for XRRUpdateConfiguration in -lXrandr" >&5 ++echo $ECHO_N "checking for XRRUpdateConfiguration in -lXrandr... $ECHO_C" >&6; } + if test "${ac_cv_lib_Xrandr_XRRUpdateConfiguration+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS + LIBS="-lXrandr -lXrandr -lXrender $x_libs $LIBS" +@@ -27413,41 +27097,37 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_Xrandr_XRRUpdateConfiguration=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_Xrandr_XRRUpdateConfiguration=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_Xrandr_XRRUpdateConfiguration" >&5 +-$as_echo "$ac_cv_lib_Xrandr_XRRUpdateConfiguration" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_Xrandr_XRRUpdateConfiguration" >&5 ++echo "${ECHO_T}$ac_cv_lib_Xrandr_XRRUpdateConfiguration" >&6; } + if test $ac_cv_lib_Xrandr_XRRUpdateConfiguration = yes; then +- { $as_echo "$as_me:$LINENO: checking for X11/extensions/Xrandr.h" >&5 +-$as_echo_n "checking for X11/extensions/Xrandr.h... " >&6; } ++ { echo "$as_me:$LINENO: checking for X11/extensions/Xrandr.h" >&5 ++echo $ECHO_N "checking for X11/extensions/Xrandr.h... $ECHO_C" >&6; } + if test "${ac_cv_header_X11_extensions_Xrandr_h+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -27465,21 +27145,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_header_X11_extensions_Xrandr_h=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_header_X11_extensions_Xrandr_h=no +@@ -27487,8 +27166,8 @@ + + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_X11_extensions_Xrandr_h" >&5 +-$as_echo "$ac_cv_header_X11_extensions_Xrandr_h" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_header_X11_extensions_Xrandr_h" >&5 ++echo "${ECHO_T}$ac_cv_header_X11_extensions_Xrandr_h" >&6; } + if test $ac_cv_header_X11_extensions_Xrandr_h = yes; then + have_randr=yes + RANDR_LIBS="-lXrandr -lXrender" +@@ -27517,40 +27196,44 @@ + + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for DISPLAY_CAPPLET" >&5 +-$as_echo_n "checking for DISPLAY_CAPPLET... " >&6; } ++{ echo "$as_me:$LINENO: checking for DISPLAY_CAPPLET" >&5 ++echo $ECHO_N "checking for DISPLAY_CAPPLET... $ECHO_C" >&6; } + +-if test -n "$DISPLAY_CAPPLET_CFLAGS"; then +- pkg_cv_DISPLAY_CAPPLET_CFLAGS="$DISPLAY_CAPPLET_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$COMMON_MODULES\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$DISPLAY_CAPPLET_CFLAGS"; then ++ pkg_cv_DISPLAY_CAPPLET_CFLAGS="$DISPLAY_CAPPLET_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$COMMON_MODULES\"") >&5 + ($PKG_CONFIG --exists --print-errors "$COMMON_MODULES") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_DISPLAY_CAPPLET_CFLAGS=`$PKG_CONFIG --cflags "$COMMON_MODULES" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi +-if test -n "$DISPLAY_CAPPLET_LIBS"; then +- pkg_cv_DISPLAY_CAPPLET_LIBS="$DISPLAY_CAPPLET_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$COMMON_MODULES\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$DISPLAY_CAPPLET_LIBS"; then ++ pkg_cv_DISPLAY_CAPPLET_LIBS="$DISPLAY_CAPPLET_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$COMMON_MODULES\"") >&5 + ($PKG_CONFIG --exists --print-errors "$COMMON_MODULES") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_DISPLAY_CAPPLET_LIBS=`$PKG_CONFIG --libs "$COMMON_MODULES" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi + + +@@ -27563,14 +27246,14 @@ + _pkg_short_errors_supported=no + fi + if test $_pkg_short_errors_supported = yes; then +- DISPLAY_CAPPLET_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$COMMON_MODULES" 2>&1` ++ DISPLAY_CAPPLET_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$COMMON_MODULES"` + else +- DISPLAY_CAPPLET_PKG_ERRORS=`$PKG_CONFIG --print-errors "$COMMON_MODULES" 2>&1` ++ DISPLAY_CAPPLET_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$COMMON_MODULES"` + fi + # Put the nasty error message in config.log where it belongs + echo "$DISPLAY_CAPPLET_PKG_ERRORS" >&5 + +- { { $as_echo "$as_me:$LINENO: error: Package requirements ($COMMON_MODULES) were not met: ++ { { echo "$as_me:$LINENO: error: Package requirements ($COMMON_MODULES) were not met: + + $DISPLAY_CAPPLET_PKG_ERRORS + +@@ -27581,7 +27264,7 @@ + and DISPLAY_CAPPLET_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. + " >&5 +-$as_echo "$as_me: error: Package requirements ($COMMON_MODULES) were not met: ++echo "$as_me: error: Package requirements ($COMMON_MODULES) were not met: + + $DISPLAY_CAPPLET_PKG_ERRORS + +@@ -27594,7 +27277,7 @@ + " >&2;} + { (exit 1); exit 1; }; } + elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -27604,7 +27287,7 @@ + + To get pkg-config, see . + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -27618,8 +27301,8 @@ + else + DISPLAY_CAPPLET_CFLAGS=$pkg_cv_DISPLAY_CAPPLET_CFLAGS + DISPLAY_CAPPLET_LIBS=$pkg_cv_DISPLAY_CAPPLET_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + : + fi + +@@ -27631,21 +27314,22 @@ + have_xcursor=no + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for XCURSOR" >&5 +-$as_echo_n "checking for XCURSOR... " >&6; } ++{ echo "$as_me:$LINENO: checking for XCURSOR" >&5 ++echo $ECHO_N "checking for XCURSOR... $ECHO_C" >&6; } + +-if test -n "$XCURSOR_CFLAGS"; then +- pkg_cv_XCURSOR_CFLAGS="$XCURSOR_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++if test -n "$PKG_CONFIG"; then ++ if test -n "$XCURSOR_CFLAGS"; then ++ pkg_cv_XCURSOR_CFLAGS="$XCURSOR_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" + xcursor + \"") >&5 + ($PKG_CONFIG --exists --print-errors " + xcursor + ") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_XCURSOR_CFLAGS=`$PKG_CONFIG --cflags " + xcursor +@@ -27653,21 +27337,23 @@ + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi +-if test -n "$XCURSOR_LIBS"; then +- pkg_cv_XCURSOR_LIBS="$XCURSOR_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++if test -n "$PKG_CONFIG"; then ++ if test -n "$XCURSOR_LIBS"; then ++ pkg_cv_XCURSOR_LIBS="$XCURSOR_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" + xcursor + \"") >&5 + ($PKG_CONFIG --exists --print-errors " + xcursor + ") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_XCURSOR_LIBS=`$PKG_CONFIG --libs " + xcursor +@@ -27675,8 +27361,9 @@ + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi + + +@@ -27689,27 +27376,27 @@ + _pkg_short_errors_supported=no + fi + if test $_pkg_short_errors_supported = yes; then +- XCURSOR_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors " ++ XCURSOR_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors " + xcursor +- " 2>&1` ++ "` + else +- XCURSOR_PKG_ERRORS=`$PKG_CONFIG --print-errors " ++ XCURSOR_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors " + xcursor +- " 2>&1` ++ "` + fi + # Put the nasty error message in config.log where it belongs + echo "$XCURSOR_PKG_ERRORS" >&5 + +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + have_xcursor=no + elif test $pkg_failed = untried; then + have_xcursor=no + else + XCURSOR_CFLAGS=$pkg_cv_XCURSOR_CFLAGS + XCURSOR_LIBS=$pkg_cv_XCURSOR_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + have_xcursor=yes + + cat >>confdefs.h <<\_ACEOF +@@ -27729,8 +27416,8 @@ + + + if test x$have_xcursor = xyes; then +- { $as_echo "$as_me:$LINENO: checking for XCURSOR cursor location" >&5 +-$as_echo_n "checking for XCURSOR cursor location... " >&6; } ++ { echo "$as_me:$LINENO: checking for XCURSOR cursor location" >&5 ++echo $ECHO_N "checking for XCURSOR cursor location... $ECHO_C" >&6; } + XCURSOR_ICONDIR=$($PKG_CONFIG --variable=icondir xcursor) + if test "x$XCURSOR_ICONDIR" != x; then + +@@ -27741,48 +27428,52 @@ + else + XCURSOR_ICONDIR=none + fi +- { $as_echo "$as_me:$LINENO: result: ${XCURSOR_ICONDIR}" >&5 +-$as_echo "${XCURSOR_ICONDIR}" >&6; } ++ { echo "$as_me:$LINENO: result: ${XCURSOR_ICONDIR}" >&5 ++echo "${ECHO_T}${XCURSOR_ICONDIR}" >&6; } + fi + + CAPPLET_LIBS="$CAPPLET_LIBS $XCURSOR_LIBS" + + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for LIBGNOMEKBD" >&5 +-$as_echo_n "checking for LIBGNOMEKBD... " >&6; } ++{ echo "$as_me:$LINENO: checking for LIBGNOMEKBD" >&5 ++echo $ECHO_N "checking for LIBGNOMEKBD... $ECHO_C" >&6; } + +-if test -n "$LIBGNOMEKBD_CFLAGS"; then +- pkg_cv_LIBGNOMEKBD_CFLAGS="$LIBGNOMEKBD_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libgnomekbd >= 2.21.4.1 libxklavier >= 3.6\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$LIBGNOMEKBD_CFLAGS"; then ++ pkg_cv_LIBGNOMEKBD_CFLAGS="$LIBGNOMEKBD_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libgnomekbd >= 2.21.4.1 libxklavier >= 3.6\"") >&5 + ($PKG_CONFIG --exists --print-errors "libgnomekbd >= 2.21.4.1 libxklavier >= 3.6") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_LIBGNOMEKBD_CFLAGS=`$PKG_CONFIG --cflags "libgnomekbd >= 2.21.4.1 libxklavier >= 3.6" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi +-if test -n "$LIBGNOMEKBD_LIBS"; then +- pkg_cv_LIBGNOMEKBD_LIBS="$LIBGNOMEKBD_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libgnomekbd >= 2.21.4.1 libxklavier >= 3.6\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$LIBGNOMEKBD_LIBS"; then ++ pkg_cv_LIBGNOMEKBD_LIBS="$LIBGNOMEKBD_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libgnomekbd >= 2.21.4.1 libxklavier >= 3.6\"") >&5 + ($PKG_CONFIG --exists --print-errors "libgnomekbd >= 2.21.4.1 libxklavier >= 3.6") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_LIBGNOMEKBD_LIBS=`$PKG_CONFIG --libs "libgnomekbd >= 2.21.4.1 libxklavier >= 3.6" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi + + +@@ -27795,14 +27486,14 @@ + _pkg_short_errors_supported=no + fi + if test $_pkg_short_errors_supported = yes; then +- LIBGNOMEKBD_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "libgnomekbd >= 2.21.4.1 libxklavier >= 3.6" 2>&1` ++ LIBGNOMEKBD_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "libgnomekbd >= 2.21.4.1 libxklavier >= 3.6"` + else +- LIBGNOMEKBD_PKG_ERRORS=`$PKG_CONFIG --print-errors "libgnomekbd >= 2.21.4.1 libxklavier >= 3.6" 2>&1` ++ LIBGNOMEKBD_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libgnomekbd >= 2.21.4.1 libxklavier >= 3.6"` + fi + # Put the nasty error message in config.log where it belongs + echo "$LIBGNOMEKBD_PKG_ERRORS" >&5 + +- { { $as_echo "$as_me:$LINENO: error: Package requirements (libgnomekbd >= 2.21.4.1 libxklavier >= 3.6) were not met: ++ { { echo "$as_me:$LINENO: error: Package requirements (libgnomekbd >= 2.21.4.1 libxklavier >= 3.6) were not met: + + $LIBGNOMEKBD_PKG_ERRORS + +@@ -27813,7 +27504,7 @@ + and LIBGNOMEKBD_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. + " >&5 +-$as_echo "$as_me: error: Package requirements (libgnomekbd >= 2.21.4.1 libxklavier >= 3.6) were not met: ++echo "$as_me: error: Package requirements (libgnomekbd >= 2.21.4.1 libxklavier >= 3.6) were not met: + + $LIBGNOMEKBD_PKG_ERRORS + +@@ -27826,7 +27517,7 @@ + " >&2;} + { (exit 1); exit 1; }; } + elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -27836,7 +27527,7 @@ + + To get pkg-config, see . + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -27850,8 +27541,8 @@ + else + LIBGNOMEKBD_CFLAGS=$pkg_cv_LIBGNOMEKBD_CFLAGS + LIBGNOMEKBD_LIBS=$pkg_cv_LIBGNOMEKBD_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + : + fi + +@@ -27859,40 +27550,44 @@ + + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for LIBGNOMEKBDUI" >&5 +-$as_echo_n "checking for LIBGNOMEKBDUI... " >&6; } ++{ echo "$as_me:$LINENO: checking for LIBGNOMEKBDUI" >&5 ++echo $ECHO_N "checking for LIBGNOMEKBDUI... $ECHO_C" >&6; } + +-if test -n "$LIBGNOMEKBDUI_CFLAGS"; then +- pkg_cv_LIBGNOMEKBDUI_CFLAGS="$LIBGNOMEKBDUI_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libgnomekbdui >= 2.21\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$LIBGNOMEKBDUI_CFLAGS"; then ++ pkg_cv_LIBGNOMEKBDUI_CFLAGS="$LIBGNOMEKBDUI_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libgnomekbdui >= 2.21\"") >&5 + ($PKG_CONFIG --exists --print-errors "libgnomekbdui >= 2.21") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_LIBGNOMEKBDUI_CFLAGS=`$PKG_CONFIG --cflags "libgnomekbdui >= 2.21" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi +-if test -n "$LIBGNOMEKBDUI_LIBS"; then +- pkg_cv_LIBGNOMEKBDUI_LIBS="$LIBGNOMEKBDUI_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libgnomekbdui >= 2.21\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$LIBGNOMEKBDUI_LIBS"; then ++ pkg_cv_LIBGNOMEKBDUI_LIBS="$LIBGNOMEKBDUI_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libgnomekbdui >= 2.21\"") >&5 + ($PKG_CONFIG --exists --print-errors "libgnomekbdui >= 2.21") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_LIBGNOMEKBDUI_LIBS=`$PKG_CONFIG --libs "libgnomekbdui >= 2.21" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi + + +@@ -27905,14 +27600,14 @@ + _pkg_short_errors_supported=no + fi + if test $_pkg_short_errors_supported = yes; then +- LIBGNOMEKBDUI_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "libgnomekbdui >= 2.21" 2>&1` ++ LIBGNOMEKBDUI_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "libgnomekbdui >= 2.21"` + else +- LIBGNOMEKBDUI_PKG_ERRORS=`$PKG_CONFIG --print-errors "libgnomekbdui >= 2.21" 2>&1` ++ LIBGNOMEKBDUI_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libgnomekbdui >= 2.21"` + fi + # Put the nasty error message in config.log where it belongs + echo "$LIBGNOMEKBDUI_PKG_ERRORS" >&5 + +- { { $as_echo "$as_me:$LINENO: error: Package requirements (libgnomekbdui >= 2.21) were not met: ++ { { echo "$as_me:$LINENO: error: Package requirements (libgnomekbdui >= 2.21) were not met: + + $LIBGNOMEKBDUI_PKG_ERRORS + +@@ -27923,7 +27618,7 @@ + and LIBGNOMEKBDUI_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. + " >&5 +-$as_echo "$as_me: error: Package requirements (libgnomekbdui >= 2.21) were not met: ++echo "$as_me: error: Package requirements (libgnomekbdui >= 2.21) were not met: + + $LIBGNOMEKBDUI_PKG_ERRORS + +@@ -27936,7 +27631,7 @@ + " >&2;} + { (exit 1); exit 1; }; } + elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -27946,7 +27641,7 @@ + + To get pkg-config, see . + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -27960,16 +27655,16 @@ + else + LIBGNOMEKBDUI_CFLAGS=$pkg_cv_LIBGNOMEKBDUI_CFLAGS + LIBGNOMEKBDUI_LIBS=$pkg_cv_LIBGNOMEKBDUI_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + : + fi + + + + +-{ $as_echo "$as_me:$LINENO: checking whether to enable About Me" >&5 +-$as_echo_n "checking whether to enable About Me... " >&6; } ++{ echo "$as_me:$LINENO: checking whether to enable About Me" >&5 ++echo $ECHO_N "checking whether to enable About Me... $ECHO_C" >&6; } + # Check whether --enable-aboutme was given. + if test "${enable_aboutme+set}" = set; then + enableval=$enable_aboutme; +@@ -27977,46 +27672,50 @@ + enable_aboutme=no + fi + +-{ $as_echo "$as_me:$LINENO: result: $enable_aboutme" >&5 +-$as_echo "$enable_aboutme" >&6; } ++{ echo "$as_me:$LINENO: result: $enable_aboutme" >&5 ++echo "${ECHO_T}$enable_aboutme" >&6; } + + if test "x$enable_aboutme" = "xyes"; then + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for LIBEBOOK" >&5 +-$as_echo_n "checking for LIBEBOOK... " >&6; } ++{ echo "$as_me:$LINENO: checking for LIBEBOOK" >&5 ++echo $ECHO_N "checking for LIBEBOOK... $ECHO_C" >&6; } + +-if test -n "$LIBEBOOK_CFLAGS"; then +- pkg_cv_LIBEBOOK_CFLAGS="$LIBEBOOK_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libebook-1.2 >= 1.7.90\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$LIBEBOOK_CFLAGS"; then ++ pkg_cv_LIBEBOOK_CFLAGS="$LIBEBOOK_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libebook-1.2 >= 1.7.90\"") >&5 + ($PKG_CONFIG --exists --print-errors "libebook-1.2 >= 1.7.90") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_LIBEBOOK_CFLAGS=`$PKG_CONFIG --cflags "libebook-1.2 >= 1.7.90" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi +-if test -n "$LIBEBOOK_LIBS"; then +- pkg_cv_LIBEBOOK_LIBS="$LIBEBOOK_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libebook-1.2 >= 1.7.90\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$LIBEBOOK_LIBS"; then ++ pkg_cv_LIBEBOOK_LIBS="$LIBEBOOK_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libebook-1.2 >= 1.7.90\"") >&5 + ($PKG_CONFIG --exists --print-errors "libebook-1.2 >= 1.7.90") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_LIBEBOOK_LIBS=`$PKG_CONFIG --libs "libebook-1.2 >= 1.7.90" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi + + +@@ -28029,14 +27728,14 @@ + _pkg_short_errors_supported=no + fi + if test $_pkg_short_errors_supported = yes; then +- LIBEBOOK_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "libebook-1.2 >= 1.7.90" 2>&1` ++ LIBEBOOK_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "libebook-1.2 >= 1.7.90"` + else +- LIBEBOOK_PKG_ERRORS=`$PKG_CONFIG --print-errors "libebook-1.2 >= 1.7.90" 2>&1` ++ LIBEBOOK_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libebook-1.2 >= 1.7.90"` + fi + # Put the nasty error message in config.log where it belongs + echo "$LIBEBOOK_PKG_ERRORS" >&5 + +- { { $as_echo "$as_me:$LINENO: error: Package requirements (libebook-1.2 >= 1.7.90) were not met: ++ { { echo "$as_me:$LINENO: error: Package requirements (libebook-1.2 >= 1.7.90) were not met: + + $LIBEBOOK_PKG_ERRORS + +@@ -28047,7 +27746,7 @@ + and LIBEBOOK_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. + " >&5 +-$as_echo "$as_me: error: Package requirements (libebook-1.2 >= 1.7.90) were not met: ++echo "$as_me: error: Package requirements (libebook-1.2 >= 1.7.90) were not met: + + $LIBEBOOK_PKG_ERRORS + +@@ -28060,7 +27759,7 @@ + " >&2;} + { (exit 1); exit 1; }; } + elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -28070,7 +27769,7 @@ + + To get pkg-config, see . + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -28084,8 +27783,8 @@ + else + LIBEBOOK_CFLAGS=$pkg_cv_LIBEBOOK_CFLAGS + LIBEBOOK_LIBS=$pkg_cv_LIBEBOOK_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + + cat >>confdefs.h <<\_ACEOF + #define HAVE_LIBEBOOK 1 +@@ -28111,40 +27810,44 @@ + if test "x$enable_hal" != "xno"; then + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for HAL" >&5 +-$as_echo_n "checking for HAL... " >&6; } ++{ echo "$as_me:$LINENO: checking for HAL" >&5 ++echo $ECHO_N "checking for HAL... $ECHO_C" >&6; } + +-if test -n "$HAL_CFLAGS"; then +- pkg_cv_HAL_CFLAGS="$HAL_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"hal >= 0.5.6, dbus-1 >= 0.32, dbus-glib-1 >= 0.32\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$HAL_CFLAGS"; then ++ pkg_cv_HAL_CFLAGS="$HAL_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"hal >= 0.5.6, dbus-1 >= 0.32, dbus-glib-1 >= 0.32\"") >&5 + ($PKG_CONFIG --exists --print-errors "hal >= 0.5.6, dbus-1 >= 0.32, dbus-glib-1 >= 0.32") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_HAL_CFLAGS=`$PKG_CONFIG --cflags "hal >= 0.5.6, dbus-1 >= 0.32, dbus-glib-1 >= 0.32" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi +-if test -n "$HAL_LIBS"; then +- pkg_cv_HAL_LIBS="$HAL_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"hal >= 0.5.6, dbus-1 >= 0.32, dbus-glib-1 >= 0.32\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$HAL_LIBS"; then ++ pkg_cv_HAL_LIBS="$HAL_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"hal >= 0.5.6, dbus-1 >= 0.32, dbus-glib-1 >= 0.32\"") >&5 + ($PKG_CONFIG --exists --print-errors "hal >= 0.5.6, dbus-1 >= 0.32, dbus-glib-1 >= 0.32") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_HAL_LIBS=`$PKG_CONFIG --libs "hal >= 0.5.6, dbus-1 >= 0.32, dbus-glib-1 >= 0.32" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi + + +@@ -28157,14 +27860,14 @@ + _pkg_short_errors_supported=no + fi + if test $_pkg_short_errors_supported = yes; then +- HAL_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "hal >= 0.5.6, dbus-1 >= 0.32, dbus-glib-1 >= 0.32" 2>&1` ++ HAL_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "hal >= 0.5.6, dbus-1 >= 0.32, dbus-glib-1 >= 0.32"` + else +- HAL_PKG_ERRORS=`$PKG_CONFIG --print-errors "hal >= 0.5.6, dbus-1 >= 0.32, dbus-glib-1 >= 0.32" 2>&1` ++ HAL_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "hal >= 0.5.6, dbus-1 >= 0.32, dbus-glib-1 >= 0.32"` + fi + # Put the nasty error message in config.log where it belongs + echo "$HAL_PKG_ERRORS" >&5 + +- { { $as_echo "$as_me:$LINENO: error: Package requirements (hal >= 0.5.6, dbus-1 >= 0.32, dbus-glib-1 >= 0.32) were not met: ++ { { echo "$as_me:$LINENO: error: Package requirements (hal >= 0.5.6, dbus-1 >= 0.32, dbus-glib-1 >= 0.32) were not met: + + $HAL_PKG_ERRORS + +@@ -28175,7 +27878,7 @@ + and HAL_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. + " >&5 +-$as_echo "$as_me: error: Package requirements (hal >= 0.5.6, dbus-1 >= 0.32, dbus-glib-1 >= 0.32) were not met: ++echo "$as_me: error: Package requirements (hal >= 0.5.6, dbus-1 >= 0.32, dbus-glib-1 >= 0.32) were not met: + + $HAL_PKG_ERRORS + +@@ -28188,7 +27891,7 @@ + " >&2;} + { (exit 1); exit 1; }; } + elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -28198,7 +27901,7 @@ + + To get pkg-config, see . + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -28212,8 +27915,8 @@ + else + HAL_CFLAGS=$pkg_cv_HAL_CFLAGS + HAL_LIBS=$pkg_cv_HAL_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + + cat >>confdefs.h <<\_ACEOF + #define USE_HAL 1 +@@ -28227,10 +27930,10 @@ + + # Extract the first word of "glib-genmarshal", so it can be a program name with args. + set dummy glib-genmarshal; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_GLIB_GENMARSHAL+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + case $GLIB_GENMARSHAL in + [\\/]* | ?:[\\/]*) +@@ -28245,7 +27948,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_GLIB_GENMARSHAL="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -28258,18 +27961,18 @@ + fi + GLIB_GENMARSHAL=$ac_cv_path_GLIB_GENMARSHAL + if test -n "$GLIB_GENMARSHAL"; then +- { $as_echo "$as_me:$LINENO: result: $GLIB_GENMARSHAL" >&5 +-$as_echo "$GLIB_GENMARSHAL" >&6; } ++ { echo "$as_me:$LINENO: result: $GLIB_GENMARSHAL" >&5 ++echo "${ECHO_T}$GLIB_GENMARSHAL" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + + + if test x"$GLIB_GENMARSHAL" = xno; then +- { { $as_echo "$as_me:$LINENO: error: glib-genmarshal executable not found in your path - should be installed with glib" >&5 +-$as_echo "$as_me: error: glib-genmarshal executable not found in your path - should be installed with glib" >&2;} ++ { { echo "$as_me:$LINENO: error: glib-genmarshal executable not found in your path - should be installed with glib" >&5 ++echo "$as_me: error: glib-genmarshal executable not found in your path - should be installed with glib" >&2;} + { (exit 1); exit 1; }; } + fi + +@@ -28278,10 +27981,10 @@ + + # Extract the first word of "gconftool-2", so it can be a program name with args. + set dummy gconftool-2; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_GCONFTOOL+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + case $GCONFTOOL in + [\\/]* | ?:[\\/]*) +@@ -28296,7 +27999,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_GCONFTOOL="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -28309,18 +28012,18 @@ + fi + GCONFTOOL=$ac_cv_path_GCONFTOOL + if test -n "$GCONFTOOL"; then +- { $as_echo "$as_me:$LINENO: result: $GCONFTOOL" >&5 +-$as_echo "$GCONFTOOL" >&6; } ++ { echo "$as_me:$LINENO: result: $GCONFTOOL" >&5 ++echo "${ECHO_T}$GCONFTOOL" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + + + if test x"$GCONFTOOL" = xno; then +- { { $as_echo "$as_me:$LINENO: error: gconftool-2 executable not found in your path - should be installed with GConf" >&5 +-$as_echo "$as_me: error: gconftool-2 executable not found in your path - should be installed with GConf" >&2;} ++ { { echo "$as_me:$LINENO: error: gconftool-2 executable not found in your path - should be installed with GConf" >&5 ++echo "$as_me: error: gconftool-2 executable not found in your path - should be installed with GConf" >&2;} + { (exit 1); exit 1; }; } + fi + +@@ -28339,8 +28042,8 @@ + + + +- { $as_echo "$as_me:$LINENO: result: Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation" >&5 +-$as_echo "Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation" >&6; } ++ { echo "$as_me:$LINENO: result: Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation" >&5 ++echo "${ECHO_T}Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation" >&6; } + + if test "x$GCONF_SCHEMA_FILE_DIR" = "x"; then + GCONF_SCHEMA_FILE_DIR='$(sysconfdir)/gconf/schemas' +@@ -28354,15 +28057,15 @@ + + + +- { $as_echo "$as_me:$LINENO: result: Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files" >&5 +-$as_echo "Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files" >&6; } ++ { echo "$as_me:$LINENO: result: Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files" >&5 ++echo "${ECHO_T}Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files" >&6; } + + # Check whether --enable-schemas-install was given. + if test "${enable_schemas_install+set}" = set; then + enableval=$enable_schemas_install; case ${enableval} in + yes|no) ;; +- *) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-schemas-install" >&5 +-$as_echo "$as_me: error: bad value ${enableval} for --enable-schemas-install" >&2;} ++ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-schemas-install" >&5 ++echo "$as_me: error: bad value ${enableval} for --enable-schemas-install" >&2;} + { (exit 1); exit 1; }; } ;; + esac + fi +@@ -28385,12 +28088,12 @@ + yes) ENABLE_GSTREAMER=yes ;; + 0.10) ENABLE_GSTREAMER=yes && GST_MAJORMINOR=0.10 ;; + no) ENABLE_GSTREAMER=no ;; +- *) { { $as_echo "$as_me:$LINENO: error: ++ *) { { echo "$as_me:$LINENO: error: + *** Bad value ${enableval} for --enable-gstreamer + *** Please use one of the following: + *** --enable-gstreamer=0.10 + " >&5 +-$as_echo "$as_me: error: ++echo "$as_me: error: + *** Bad value ${enableval} for --enable-gstreamer + *** Please use one of the following: + *** --enable-gstreamer=0.10 +@@ -28408,40 +28111,44 @@ + + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for GST" >&5 +-$as_echo_n "checking for GST... " >&6; } ++{ echo "$as_me:$LINENO: checking for GST" >&5 ++echo $ECHO_N "checking for GST... $ECHO_C" >&6; } + +-if test -n "$GST_CFLAGS"; then +- pkg_cv_GST_CFLAGS="$GST_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$PKGS\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GST_CFLAGS"; then ++ pkg_cv_GST_CFLAGS="$GST_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$PKGS\"") >&5 + ($PKG_CONFIG --exists --print-errors "$PKGS") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_GST_CFLAGS=`$PKG_CONFIG --cflags "$PKGS" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi +-if test -n "$GST_LIBS"; then +- pkg_cv_GST_LIBS="$GST_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$PKGS\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GST_LIBS"; then ++ pkg_cv_GST_LIBS="$GST_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$PKGS\"") >&5 + ($PKG_CONFIG --exists --print-errors "$PKGS") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_GST_LIBS=`$PKG_CONFIG --libs "$PKGS" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi + + +@@ -28454,32 +28161,32 @@ + _pkg_short_errors_supported=no + fi + if test $_pkg_short_errors_supported = yes; then +- GST_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$PKGS" 2>&1` ++ GST_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$PKGS"` + else +- GST_PKG_ERRORS=`$PKG_CONFIG --print-errors "$PKGS" 2>&1` ++ GST_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$PKGS"` + fi + # Put the nasty error message in config.log where it belongs + echo "$GST_PKG_ERRORS" >&5 + +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + elif test $pkg_failed = untried; then +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + else + GST_CFLAGS=$pkg_cv_GST_CFLAGS + GST_LIBS=$pkg_cv_GST_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + have_gstreamer=yes + fi + + GST_LIBS="$GST_LIBS -lgstinterfaces-0.10 -lgstaudio-0.10" + else +- { $as_echo "$as_me:$LINENO: *** GStreamer support disabled ***" >&5 +-$as_echo "$as_me: *** GStreamer support disabled ***" >&6;} ++ { echo "$as_me:$LINENO: *** GStreamer support disabled ***" >&5 ++echo "$as_me: *** GStreamer support disabled ***" >&6;} + fi + if test "x$have_gstreamer" = "xyes"; then + HAVE_GSTREAMER_TRUE= +@@ -28505,40 +28212,44 @@ + if test "x$with_libcanberra" != "xno"; then + + pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for CANBERRA" >&5 +-$as_echo_n "checking for CANBERRA... " >&6; } ++{ echo "$as_me:$LINENO: checking for CANBERRA" >&5 ++echo $ECHO_N "checking for CANBERRA... $ECHO_C" >&6; } + +-if test -n "$CANBERRA_CFLAGS"; then +- pkg_cv_CANBERRA_CFLAGS="$CANBERRA_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libcanberra-gtk >= 0.4 gio-2.0\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$CANBERRA_CFLAGS"; then ++ pkg_cv_CANBERRA_CFLAGS="$CANBERRA_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libcanberra-gtk >= 0.4 gio-2.0\"") >&5 + ($PKG_CONFIG --exists --print-errors "libcanberra-gtk >= 0.4 gio-2.0") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_CANBERRA_CFLAGS=`$PKG_CONFIG --cflags "libcanberra-gtk >= 0.4 gio-2.0" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi +-if test -n "$CANBERRA_LIBS"; then +- pkg_cv_CANBERRA_LIBS="$CANBERRA_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libcanberra-gtk >= 0.4 gio-2.0\"") >&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$CANBERRA_LIBS"; then ++ pkg_cv_CANBERRA_LIBS="$CANBERRA_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libcanberra-gtk >= 0.4 gio-2.0\"") >&5 + ($PKG_CONFIG --exists --print-errors "libcanberra-gtk >= 0.4 gio-2.0") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_CANBERRA_LIBS=`$PKG_CONFIG --libs "libcanberra-gtk >= 0.4 gio-2.0" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi + + +@@ -28551,23 +28262,23 @@ + _pkg_short_errors_supported=no + fi + if test $_pkg_short_errors_supported = yes; then +- CANBERRA_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "libcanberra-gtk >= 0.4 gio-2.0" 2>&1` ++ CANBERRA_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "libcanberra-gtk >= 0.4 gio-2.0"` + else +- CANBERRA_PKG_ERRORS=`$PKG_CONFIG --print-errors "libcanberra-gtk >= 0.4 gio-2.0" 2>&1` ++ CANBERRA_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libcanberra-gtk >= 0.4 gio-2.0"` + fi + # Put the nasty error message in config.log where it belongs + echo "$CANBERRA_PKG_ERRORS" >&5 + +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + have_canberra=no + elif test $pkg_failed = untried; then + have_canberra=no + else + CANBERRA_CFLAGS=$pkg_cv_CANBERRA_CFLAGS + CANBERRA_LIBS=$pkg_cv_CANBERRA_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + have_canberra=yes + fi + if test "x$have_gstreamer" = "xyes" && test "x$have_canberra" = "xyes" ; then +@@ -28577,16 +28288,16 @@ + + else + if test "x$with_libcanberra" = "xyes" -a "x$have_canberra" = "xno"; then +- { { $as_echo "$as_me:$LINENO: error: Sound capplet requested but libcanberra not found" >&5 +-$as_echo "$as_me: error: Sound capplet requested but libcanberra not found" >&2;} ++ { { echo "$as_me:$LINENO: error: Sound capplet requested but libcanberra not found" >&5 ++echo "$as_me: error: Sound capplet requested but libcanberra not found" >&2;} + { (exit 1); exit 1; }; } + fi +- { $as_echo "$as_me:$LINENO: *** Sound capplet will not be built" >&5 +-$as_echo "$as_me: *** Sound capplet will not be built" >&6;}; ++ { echo "$as_me:$LINENO: *** Sound capplet will not be built" >&5 ++echo "$as_me: *** Sound capplet will not be built" >&6;}; + fi + else +- { $as_echo "$as_me:$LINENO: *** Sound capplet will not be built" >&5 +-$as_echo "$as_me: *** Sound capplet will not be built" >&6;}; ++ { echo "$as_me:$LINENO: *** Sound capplet will not be built" >&5 ++echo "$as_me: *** Sound capplet will not be built" >&6;}; + fi + if test "x$with_libcanberra" = "xyes"; then + BUILD_SOUND_TRUE= +@@ -28616,10 +28327,10 @@ + + # Extract the first word of "update-mime-database", so it can be a program name with args. + set dummy update-mime-database; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_UPDATE_MIME_DATABASE+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + case $UPDATE_MIME_DATABASE in + [\\/]* | ?:[\\/]*) +@@ -28634,7 +28345,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_UPDATE_MIME_DATABASE="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -28647,11 +28358,11 @@ + fi + UPDATE_MIME_DATABASE=$ac_cv_path_UPDATE_MIME_DATABASE + if test -n "$UPDATE_MIME_DATABASE"; then +- { $as_echo "$as_me:$LINENO: result: $UPDATE_MIME_DATABASE" >&5 +-$as_echo "$UPDATE_MIME_DATABASE" >&6; } ++ { echo "$as_me:$LINENO: result: $UPDATE_MIME_DATABASE" >&5 ++echo "${ECHO_T}$UPDATE_MIME_DATABASE" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -28703,12 +28414,11 @@ + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( +- *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 +-$as_echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( +- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) $as_unset $ac_var ;; + esac ;; + esac +@@ -28741,12 +28451,12 @@ + if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + test "x$cache_file" != "x/dev/null" && +- { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5 +-$as_echo "$as_me: updating cache $cache_file" >&6;} ++ { echo "$as_me:$LINENO: updating cache $cache_file" >&5 ++echo "$as_me: updating cache $cache_file" >&6;} + cat confcache >$cache_file + else +- { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 +-$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} ++ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 ++echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi + fi + rm -f confcache +@@ -28762,7 +28472,7 @@ + for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' +- ac_i=`$as_echo "$ac_i" | sed "$ac_script"` ++ ac_i=`echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" +@@ -28774,51 +28484,51 @@ + + + if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined. ++ { { echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined. + Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined. ++echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined. + Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } + fi + if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. ++ { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. + Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"AMDEP\" was never defined. ++echo "$as_me: error: conditional \"AMDEP\" was never defined. + Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } + fi + if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. ++ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. + Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. ++echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. + Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } + fi + if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. ++ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. + Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. ++echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. + Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } + fi + if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined. ++ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined. + Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined. ++echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined. + Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } + fi + if test -z "${ENABLE_SK_TRUE}" && test -z "${ENABLE_SK_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"ENABLE_SK\" was never defined. ++ { { echo "$as_me:$LINENO: error: conditional \"ENABLE_SK\" was never defined. + Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"ENABLE_SK\" was never defined. ++echo "$as_me: error: conditional \"ENABLE_SK\" was never defined. + Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } + fi + if test -z "${HAVE_GNOME_DOC_UTILS_TRUE}" && test -z "${HAVE_GNOME_DOC_UTILS_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"HAVE_GNOME_DOC_UTILS\" was never defined. ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_GNOME_DOC_UTILS\" was never defined. + Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"HAVE_GNOME_DOC_UTILS\" was never defined. ++echo "$as_me: error: conditional \"HAVE_GNOME_DOC_UTILS\" was never defined. + Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } + fi +@@ -28827,76 +28537,75 @@ + + + if test -z "${HAVE_TYPING_BREAK_TRUE}" && test -z "${HAVE_TYPING_BREAK_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"HAVE_TYPING_BREAK\" was never defined. ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_TYPING_BREAK\" was never defined. + Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"HAVE_TYPING_BREAK\" was never defined. ++echo "$as_me: error: conditional \"HAVE_TYPING_BREAK\" was never defined. + Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } + fi + if test -z "${ENABLE_DYNAMIC_LIBSLAB_TRUE}" && test -z "${ENABLE_DYNAMIC_LIBSLAB_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"ENABLE_DYNAMIC_LIBSLAB\" was never defined. ++ { { echo "$as_me:$LINENO: error: conditional \"ENABLE_DYNAMIC_LIBSLAB\" was never defined. + Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"ENABLE_DYNAMIC_LIBSLAB\" was never defined. ++echo "$as_me: error: conditional \"ENABLE_DYNAMIC_LIBSLAB\" was never defined. + Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } + fi + if test -z "${HAVE_RANDR_TRUE}" && test -z "${HAVE_RANDR_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"HAVE_RANDR\" was never defined. ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_RANDR\" was never defined. + Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"HAVE_RANDR\" was never defined. ++echo "$as_me: error: conditional \"HAVE_RANDR\" was never defined. + Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } + fi + if test -z "${HAVE_XCURSOR_TRUE}" && test -z "${HAVE_XCURSOR_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"HAVE_XCURSOR\" was never defined. ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_XCURSOR\" was never defined. + Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"HAVE_XCURSOR\" was never defined. ++echo "$as_me: error: conditional \"HAVE_XCURSOR\" was never defined. + Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } + fi + if test -z "${BUILD_ABOUTME_TRUE}" && test -z "${BUILD_ABOUTME_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"BUILD_ABOUTME\" was never defined. ++ { { echo "$as_me:$LINENO: error: conditional \"BUILD_ABOUTME\" was never defined. + Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"BUILD_ABOUTME\" was never defined. ++echo "$as_me: error: conditional \"BUILD_ABOUTME\" was never defined. + Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } + fi + if test -z "${GCONF_SCHEMAS_INSTALL_TRUE}" && test -z "${GCONF_SCHEMAS_INSTALL_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"GCONF_SCHEMAS_INSTALL\" was never defined. ++ { { echo "$as_me:$LINENO: error: conditional \"GCONF_SCHEMAS_INSTALL\" was never defined. + Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"GCONF_SCHEMAS_INSTALL\" was never defined. ++echo "$as_me: error: conditional \"GCONF_SCHEMAS_INSTALL\" was never defined. + Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } + fi + if test -z "${HAVE_GSTREAMER_TRUE}" && test -z "${HAVE_GSTREAMER_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"HAVE_GSTREAMER\" was never defined. ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_GSTREAMER\" was never defined. + Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"HAVE_GSTREAMER\" was never defined. ++echo "$as_me: error: conditional \"HAVE_GSTREAMER\" was never defined. + Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } + fi + if test -z "${BUILD_SOUND_TRUE}" && test -z "${BUILD_SOUND_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"BUILD_SOUND\" was never defined. ++ { { echo "$as_me:$LINENO: error: conditional \"BUILD_SOUND\" was never defined. + Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"BUILD_SOUND\" was never defined. ++echo "$as_me: error: conditional \"BUILD_SOUND\" was never defined. + Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } + fi + if test -z "${ENABLE_UPDATE_MIMEDB_TRUE}" && test -z "${ENABLE_UPDATE_MIMEDB_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"ENABLE_UPDATE_MIMEDB\" was never defined. ++ { { echo "$as_me:$LINENO: error: conditional \"ENABLE_UPDATE_MIMEDB\" was never defined. + Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"ENABLE_UPDATE_MIMEDB\" was never defined. ++echo "$as_me: error: conditional \"ENABLE_UPDATE_MIMEDB\" was never defined. + Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } + fi + + : ${CONFIG_STATUS=./config.status} +-ac_write_fail=0 + ac_clean_files_save=$ac_clean_files + ac_clean_files="$ac_clean_files $CONFIG_STATUS" +-{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +-$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +-cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 ++echo "$as_me: creating $CONFIG_STATUS" >&6;} ++cat >$CONFIG_STATUS <<_ACEOF + #! $SHELL + # Generated by $as_me. + # Run this file to recreate the current configuration. +@@ -28909,7 +28618,7 @@ + SHELL=\${CONFIG_SHELL-$SHELL} + _ACEOF + +-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++cat >>$CONFIG_STATUS <<\_ACEOF + ## --------------------- ## + ## M4sh Initialization. ## + ## --------------------- ## +@@ -28919,7 +28628,7 @@ + if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: +- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +@@ -28941,45 +28650,17 @@ + as_cr_digits='0123456789' + as_cr_alnum=$as_cr_Letters$as_cr_digits + +-as_nl=' +-' +-export as_nl +-# Printing a long string crashes Solaris 7 /usr/bin/printf. +-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +-if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then +- as_echo='printf %s\n' +- as_echo_n='printf %s' +-else +- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then +- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' +- as_echo_n='/usr/ucb/echo -n' +- else +- as_echo_body='eval expr "X$1" : "X\\(.*\\)"' +- as_echo_n_body='eval +- arg=$1; +- case $arg in +- *"$as_nl"*) +- expr "X$arg" : "X\\(.*\\)$as_nl"; +- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; +- esac; +- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" +- ' +- export as_echo_n_body +- as_echo_n='sh -c $as_echo_n_body as_echo' +- fi +- export as_echo_body +- as_echo='sh -c $as_echo_body as_echo' +-fi +- + # The user is always right. + if test "${PATH_SEPARATOR+set}" != set; then +- PATH_SEPARATOR=: +- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { +- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || +- PATH_SEPARATOR=';' +- } ++ echo "#! /bin/sh" >conf$$.sh ++ echo "exit 0" >>conf$$.sh ++ chmod +x conf$$.sh ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then ++ PATH_SEPARATOR=';' ++ else ++ PATH_SEPARATOR=: ++ fi ++ rm -f conf$$.sh + fi + + # Support unset when possible. +@@ -28995,6 +28676,8 @@ + # there to prevent editors from complaining about space-tab. + # (If _AS_PATH_WALK were called with IFS unset, it would disable word + # splitting by setting IFS to empty value.) ++as_nl=' ++' + IFS=" "" $as_nl" + + # Find who we are. Look in the path if we contain no directory separator. +@@ -29017,7 +28700,7 @@ + as_myself=$0 + fi + if test ! -f "$as_myself"; then +- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } + fi + +@@ -29030,10 +28713,17 @@ + PS4='+ ' + + # NLS nuisances. +-LC_ALL=C +-export LC_ALL +-LANGUAGE=C +-export LANGUAGE ++for as_var in \ ++ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ ++ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ ++ LC_TELEPHONE LC_TIME ++do ++ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then ++ eval $as_var=C; export $as_var ++ else ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++ fi ++done + + # Required to use basename. + if expr a : '\(a\)' >/dev/null 2>&1 && +@@ -29055,7 +28745,7 @@ + $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +-$as_echo X/"$0" | ++echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q +@@ -29106,7 +28796,7 @@ + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || +- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 ++ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems +@@ -29134,6 +28824,7 @@ + *) + ECHO_N='-n';; + esac ++ + if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +@@ -29146,22 +28837,19 @@ + rm -f conf$$.dir/conf$$.file + else + rm -f conf$$.dir +- mkdir conf$$.dir 2>/dev/null ++ mkdir conf$$.dir + fi +-if (echo >conf$$.file) 2>/dev/null; then +- if ln -s conf$$.file conf$$ 2>/dev/null; then +- as_ln_s='ln -s' +- # ... but there are two gotchas: +- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. +- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. +- # In both cases, we have to default to `cp -p'. +- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || +- as_ln_s='cp -p' +- elif ln conf$$.file conf$$ 2>/dev/null; then +- as_ln_s=ln +- else ++echo >conf$$.file ++if ln -s conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' +- fi ++elif ln conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s=ln + else + as_ln_s='cp -p' + fi +@@ -29186,10 +28874,10 @@ + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then +- test -d "$1/."; ++ test -d "$1/."; + else + case $1 in +- -*)set "./$1";; ++ -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + ???[sx]*):;;*)false;;esac;fi +@@ -29212,7 +28900,7 @@ + # values after options handling. + ac_log=" + This file was extended by gnome-control-center $as_me 2.24.0.1, which was +-generated by GNU Autoconf 2.62. Invocation command line was ++generated by GNU Autoconf 2.61. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS +@@ -29225,7 +28913,7 @@ + + _ACEOF + +-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++cat >>$CONFIG_STATUS <<_ACEOF + # Files that config.status was made for. + config_files="$ac_config_files" + config_headers="$ac_config_headers" +@@ -29233,7 +28921,7 @@ + + _ACEOF + +-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++cat >>$CONFIG_STATUS <<\_ACEOF + ac_cs_usage="\ + \`$as_me' instantiates files from templates according to the + current configuration. +@@ -29246,9 +28934,9 @@ + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] +- instantiate the configuration file FILE ++ instantiate the configuration file FILE + --header=FILE[:TEMPLATE] +- instantiate the configuration header FILE ++ instantiate the configuration header FILE + + Configuration files: + $config_files +@@ -29262,13 +28950,13 @@ + Report bugs to ." + + _ACEOF +-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++cat >>$CONFIG_STATUS <<_ACEOF + ac_cs_version="\\ + gnome-control-center config.status 2.24.0.1 +-configured by $0, generated by GNU Autoconf 2.62, +- with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" ++configured by $0, generated by GNU Autoconf 2.61, ++ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" + +-Copyright (C) 2008 Free Software Foundation, Inc. ++Copyright (C) 2006 Free Software Foundation, Inc. + This config.status script is free software; the Free Software Foundation + gives unlimited permission to copy, distribute and modify it." + +@@ -29276,12 +28964,11 @@ + srcdir='$srcdir' + INSTALL='$INSTALL' + MKDIR_P='$MKDIR_P' +-AWK='$AWK' +-test -n "\$AWK" || AWK=awk + _ACEOF + +-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +-# The default lists apply if the user does not specify any file. ++cat >>$CONFIG_STATUS <<\_ACEOF ++# If no file are specified by the user, then we need to provide default ++# value. By we need to know if files were specified by the user. + ac_need_defaults=: + while test $# != 0 + do +@@ -29303,36 +28990,30 @@ + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) +- $as_echo "$ac_cs_version"; exit ;; ++ echo "$ac_cs_version"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift +- case $ac_optarg in +- *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; +- esac +- CONFIG_FILES="$CONFIG_FILES '$ac_optarg'" ++ CONFIG_FILES="$CONFIG_FILES $ac_optarg" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift +- case $ac_optarg in +- *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; +- esac +- CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'" ++ CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" + ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header +- { $as_echo "$as_me: error: ambiguous option: $1 ++ { echo "$as_me: error: ambiguous option: $1 + Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; };; + --help | --hel | -h ) +- $as_echo "$ac_cs_usage"; exit ;; ++ echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. +- -*) { $as_echo "$as_me: error: unrecognized option: $1 ++ -*) { echo "$as_me: error: unrecognized option: $1 + Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } ;; + +@@ -29351,29 +29032,27 @@ + fi + + _ACEOF +-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++cat >>$CONFIG_STATUS <<_ACEOF + if \$ac_cs_recheck; then +- set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion +- shift +- \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 +- CONFIG_SHELL='$SHELL' ++ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 ++ CONFIG_SHELL=$SHELL + export CONFIG_SHELL +- exec "\$@" ++ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + fi + + _ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++cat >>$CONFIG_STATUS <<\_ACEOF + exec 5>>config.log + { + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX + ## Running $as_me. ## + _ASBOX +- $as_echo "$ac_log" ++ echo "$ac_log" + } >&5 + + _ACEOF +-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++cat >>$CONFIG_STATUS <<_ACEOF + # + # INIT-COMMANDS + # +@@ -29382,7 +29061,7 @@ + + _ACEOF + +-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++cat >>$CONFIG_STATUS <<\_ACEOF + + # Handling of arguments. + for ac_config_target in $ac_config_targets +@@ -29434,8 +29113,8 @@ + "typing-break/Makefile") CONFIG_FILES="$CONFIG_FILES typing-break/Makefile" ;; + "po/stamp-it") CONFIG_COMMANDS="$CONFIG_COMMANDS po/stamp-it" ;; + +- *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +-$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;} ++ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 ++echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac + done +@@ -29476,143 +29155,390 @@ + (umask 077 && mkdir "$tmp") + } || + { +- $as_echo "$as_me: cannot create a temporary directory in ." >&2 ++ echo "$me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } + } + +-# Set up the scripts for CONFIG_FILES section. +-# No need to generate them if there are no CONFIG_FILES. +-# This happens for instance with `./config.status config.h'. ++# ++# Set up the sed scripts for CONFIG_FILES section. ++# ++ ++# No need to generate the scripts if there are no CONFIG_FILES. ++# This happens for instance when ./config.status config.h + if test -n "$CONFIG_FILES"; then + ++_ACEOF + +-ac_cr=' ' +-ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then +- ac_cs_awk_cr='\\r' +-else +- ac_cs_awk_cr=$ac_cr ++ ++ ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ cat >conf$$subs.sed <<_ACEOF ++SHELL!$SHELL$ac_delim ++PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim ++PACKAGE_NAME!$PACKAGE_NAME$ac_delim ++PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim ++PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim ++PACKAGE_STRING!$PACKAGE_STRING$ac_delim ++PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim ++exec_prefix!$exec_prefix$ac_delim ++prefix!$prefix$ac_delim ++program_transform_name!$program_transform_name$ac_delim ++bindir!$bindir$ac_delim ++sbindir!$sbindir$ac_delim ++libexecdir!$libexecdir$ac_delim ++datarootdir!$datarootdir$ac_delim ++datadir!$datadir$ac_delim ++sysconfdir!$sysconfdir$ac_delim ++sharedstatedir!$sharedstatedir$ac_delim ++localstatedir!$localstatedir$ac_delim ++includedir!$includedir$ac_delim ++oldincludedir!$oldincludedir$ac_delim ++docdir!$docdir$ac_delim ++infodir!$infodir$ac_delim ++htmldir!$htmldir$ac_delim ++dvidir!$dvidir$ac_delim ++pdfdir!$pdfdir$ac_delim ++psdir!$psdir$ac_delim ++libdir!$libdir$ac_delim ++localedir!$localedir$ac_delim ++mandir!$mandir$ac_delim ++DEFS!$DEFS$ac_delim ++ECHO_C!$ECHO_C$ac_delim ++ECHO_N!$ECHO_N$ac_delim ++ECHO_T!$ECHO_T$ac_delim ++LIBS!$LIBS$ac_delim ++build_alias!$build_alias$ac_delim ++host_alias!$host_alias$ac_delim ++target_alias!$target_alias$ac_delim ++INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim ++INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim ++INSTALL_DATA!$INSTALL_DATA$ac_delim ++am__isrc!$am__isrc$ac_delim ++CYGPATH_W!$CYGPATH_W$ac_delim ++PACKAGE!$PACKAGE$ac_delim ++VERSION!$VERSION$ac_delim ++ACLOCAL!$ACLOCAL$ac_delim ++AUTOCONF!$AUTOCONF$ac_delim ++AUTOMAKE!$AUTOMAKE$ac_delim ++AUTOHEADER!$AUTOHEADER$ac_delim ++MAKEINFO!$MAKEINFO$ac_delim ++install_sh!$install_sh$ac_delim ++STRIP!$STRIP$ac_delim ++INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim ++mkdir_p!$mkdir_p$ac_delim ++AWK!$AWK$ac_delim ++SET_MAKE!$SET_MAKE$ac_delim ++am__leading_dot!$am__leading_dot$ac_delim ++AMTAR!$AMTAR$ac_delim ++am__tar!$am__tar$ac_delim ++am__untar!$am__untar$ac_delim ++MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim ++MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim ++MAINT!$MAINT$ac_delim ++CC!$CC$ac_delim ++CFLAGS!$CFLAGS$ac_delim ++LDFLAGS!$LDFLAGS$ac_delim ++CPPFLAGS!$CPPFLAGS$ac_delim ++ac_ct_CC!$ac_ct_CC$ac_delim ++EXEEXT!$EXEEXT$ac_delim ++OBJEXT!$OBJEXT$ac_delim ++DEPDIR!$DEPDIR$ac_delim ++am__include!$am__include$ac_delim ++am__quote!$am__quote$ac_delim ++AMDEP_TRUE!$AMDEP_TRUE$ac_delim ++AMDEP_FALSE!$AMDEP_FALSE$ac_delim ++AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim ++CCDEPMODE!$CCDEPMODE$ac_delim ++am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim ++am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim ++CPP!$CPP$ac_delim ++GREP!$GREP$ac_delim ++EGREP!$EGREP$ac_delim ++build!$build$ac_delim ++build_cpu!$build_cpu$ac_delim ++build_vendor!$build_vendor$ac_delim ++build_os!$build_os$ac_delim ++host!$host$ac_delim ++host_cpu!$host_cpu$ac_delim ++host_vendor!$host_vendor$ac_delim ++host_os!$host_os$ac_delim ++SED!$SED$ac_delim ++LN_S!$LN_S$ac_delim ++ECHO!$ECHO$ac_delim ++AR!$AR$ac_delim ++RANLIB!$RANLIB$ac_delim ++DSYMUTIL!$DSYMUTIL$ac_delim ++NMEDIT!$NMEDIT$ac_delim ++CXX!$CXX$ac_delim ++_ACEOF ++ ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then ++ break ++ elif $ac_last_try; then ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " ++ fi ++done ++ ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` ++if test -n "$ac_eof"; then ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ++ ac_eof=`expr $ac_eof + 1` + fi + +-echo 'BEGIN {' >"$tmp/subs1.awk" && ++cat >>$CONFIG_STATUS <<_ACEOF ++cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b ++_ACEOF ++sed ' ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g ++s/^/s,@/; s/!/@,|#_!!_#|/ ++:n ++t n ++s/'"$ac_delim"'$/,g/; t ++s/$/\\/; p ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ++' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF ++CEOF$ac_eof + _ACEOF + + +-{ +- echo "cat >conf$$subs.awk <<_ACEOF" && +- echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && +- echo "_ACEOF" +-} >conf$$subs.sh || +- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} +- { (exit 1); exit 1; }; } +-ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` + ac_delim='%!_!# ' + for ac_last_try in false false false false false :; do +- . ./conf$$subs.sh || +- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} +- { (exit 1); exit 1; }; } ++ cat >conf$$subs.sed <<_ACEOF ++CXXFLAGS!$CXXFLAGS$ac_delim ++ac_ct_CXX!$ac_ct_CXX$ac_delim ++CXXDEPMODE!$CXXDEPMODE$ac_delim ++am__fastdepCXX_TRUE!$am__fastdepCXX_TRUE$ac_delim ++am__fastdepCXX_FALSE!$am__fastdepCXX_FALSE$ac_delim ++CXXCPP!$CXXCPP$ac_delim ++F77!$F77$ac_delim ++FFLAGS!$FFLAGS$ac_delim ++ac_ct_F77!$ac_ct_F77$ac_delim ++LIBTOOL!$LIBTOOL$ac_delim ++PKG_CONFIG!$PKG_CONFIG$ac_delim ++HELP_DIR!$HELP_DIR$ac_delim ++OMF_DIR!$OMF_DIR$ac_delim ++DOC_USER_FORMATS!$DOC_USER_FORMATS$ac_delim ++ENABLE_SK_TRUE!$ENABLE_SK_TRUE$ac_delim ++ENABLE_SK_FALSE!$ENABLE_SK_FALSE$ac_delim ++DISTCHECK_CONFIGURE_FLAGS!$DISTCHECK_CONFIGURE_FLAGS$ac_delim ++HAVE_GNOME_DOC_UTILS_TRUE!$HAVE_GNOME_DOC_UTILS_TRUE$ac_delim ++HAVE_GNOME_DOC_UTILS_FALSE!$HAVE_GNOME_DOC_UTILS_FALSE$ac_delim ++INTLTOOL_UPDATE!$INTLTOOL_UPDATE$ac_delim ++INTLTOOL_MERGE!$INTLTOOL_MERGE$ac_delim ++INTLTOOL_EXTRACT!$INTLTOOL_EXTRACT$ac_delim ++INTLTOOL_DESKTOP_RULE!$INTLTOOL_DESKTOP_RULE$ac_delim ++INTLTOOL_DIRECTORY_RULE!$INTLTOOL_DIRECTORY_RULE$ac_delim ++INTLTOOL_KEYS_RULE!$INTLTOOL_KEYS_RULE$ac_delim ++INTLTOOL_PROP_RULE!$INTLTOOL_PROP_RULE$ac_delim ++INTLTOOL_OAF_RULE!$INTLTOOL_OAF_RULE$ac_delim ++INTLTOOL_PONG_RULE!$INTLTOOL_PONG_RULE$ac_delim ++INTLTOOL_SERVER_RULE!$INTLTOOL_SERVER_RULE$ac_delim ++INTLTOOL_SHEET_RULE!$INTLTOOL_SHEET_RULE$ac_delim ++INTLTOOL_SOUNDLIST_RULE!$INTLTOOL_SOUNDLIST_RULE$ac_delim ++INTLTOOL_UI_RULE!$INTLTOOL_UI_RULE$ac_delim ++INTLTOOL_XAM_RULE!$INTLTOOL_XAM_RULE$ac_delim ++INTLTOOL_KBD_RULE!$INTLTOOL_KBD_RULE$ac_delim ++INTLTOOL_XML_RULE!$INTLTOOL_XML_RULE$ac_delim ++INTLTOOL_XML_NOMERGE_RULE!$INTLTOOL_XML_NOMERGE_RULE$ac_delim ++INTLTOOL_CAVES_RULE!$INTLTOOL_CAVES_RULE$ac_delim ++INTLTOOL_SCHEMAS_RULE!$INTLTOOL_SCHEMAS_RULE$ac_delim ++INTLTOOL_THEME_RULE!$INTLTOOL_THEME_RULE$ac_delim ++INTLTOOL_SERVICE_RULE!$INTLTOOL_SERVICE_RULE$ac_delim ++INTLTOOL_POLICY_RULE!$INTLTOOL_POLICY_RULE$ac_delim ++XGETTEXT!$XGETTEXT$ac_delim ++MSGMERGE!$MSGMERGE$ac_delim ++MSGFMT!$MSGFMT$ac_delim ++INTLTOOL_PERL!$INTLTOOL_PERL$ac_delim ++ALL_LINGUAS!$ALL_LINGUAS$ac_delim ++DATADIRNAME!$DATADIRNAME$ac_delim ++GETTEXT_PACKAGE!$GETTEXT_PACKAGE$ac_delim ++USE_NLS!$USE_NLS$ac_delim ++MSGFMT_OPTS!$MSGFMT_OPTS$ac_delim ++GMSGFMT!$GMSGFMT$ac_delim ++CATALOGS!$CATALOGS$ac_delim ++CATOBJEXT!$CATOBJEXT$ac_delim ++GMOFILES!$GMOFILES$ac_delim ++INSTOBJEXT!$INSTOBJEXT$ac_delim ++INTLLIBS!$INTLLIBS$ac_delim ++PO_IN_DATADIR_TRUE!$PO_IN_DATADIR_TRUE$ac_delim ++PO_IN_DATADIR_FALSE!$PO_IN_DATADIR_FALSE$ac_delim ++POFILES!$POFILES$ac_delim ++POSUB!$POSUB$ac_delim ++MKINSTALLDIRS!$MKINSTALLDIRS$ac_delim ++ACLOCAL_AMFLAGS!$ACLOCAL_AMFLAGS$ac_delim ++WARN_CFLAGS!$WARN_CFLAGS$ac_delim ++DISABLE_DEPRECATED!$DISABLE_DEPRECATED$ac_delim ++XMKMF!$XMKMF$ac_delim ++X_CFLAGS!$X_CFLAGS$ac_delim ++X_PRE_LIBS!$X_PRE_LIBS$ac_delim ++X_LIBS!$X_LIBS$ac_delim ++X_EXTRA_LIBS!$X_EXTRA_LIBS$ac_delim ++TYPING_BREAK!$TYPING_BREAK$ac_delim ++SCREENSAVER_LIBS!$SCREENSAVER_LIBS$ac_delim ++HAVE_TYPING_BREAK_TRUE!$HAVE_TYPING_BREAK_TRUE$ac_delim ++HAVE_TYPING_BREAK_FALSE!$HAVE_TYPING_BREAK_FALSE$ac_delim ++XF86MISC_LIBS!$XF86MISC_LIBS$ac_delim ++ENABLE_DYNAMIC_LIBSLAB_TRUE!$ENABLE_DYNAMIC_LIBSLAB_TRUE$ac_delim ++ENABLE_DYNAMIC_LIBSLAB_FALSE!$ENABLE_DYNAMIC_LIBSLAB_FALSE$ac_delim ++LIBSLAB_CFLAGS!$LIBSLAB_CFLAGS$ac_delim ++LIBSLAB_LIBS!$LIBSLAB_LIBS$ac_delim ++CAPPLET_CFLAGS!$CAPPLET_CFLAGS$ac_delim ++CAPPLET_LIBS!$CAPPLET_LIBS$ac_delim ++GNOMECC_CFLAGS!$GNOMECC_CFLAGS$ac_delim ++GNOMECC_LIBS!$GNOMECC_LIBS$ac_delim ++GNOME_CFLAGS!$GNOME_CFLAGS$ac_delim ++GNOME_LIBS!$GNOME_LIBS$ac_delim ++DBUS_CFLAGS!$DBUS_CFLAGS$ac_delim ++DBUS_LIBS!$DBUS_LIBS$ac_delim ++GNOME_DESKTOP_CFLAGS!$GNOME_DESKTOP_CFLAGS$ac_delim ++GNOME_DESKTOP_LIBS!$GNOME_DESKTOP_LIBS$ac_delim ++DEFAULT_APPLICATIONS_CAPPLET_CFLAGS!$DEFAULT_APPLICATIONS_CAPPLET_CFLAGS$ac_delim ++DEFAULT_APPLICATIONS_CAPPLET_LIBS!$DEFAULT_APPLICATIONS_CAPPLET_LIBS$ac_delim ++METACITY_CFLAGS!$METACITY_CFLAGS$ac_delim ++METACITY_LIBS!$METACITY_LIBS$ac_delim ++TYPING_CFLAGS!$TYPING_CFLAGS$ac_delim ++TYPING_LIBS!$TYPING_LIBS$ac_delim ++GSD_DBUS_CFLAGS!$GSD_DBUS_CFLAGS$ac_delim ++GSD_DBUS_LIBS!$GSD_DBUS_LIBS$ac_delim ++GIO_CFLAGS!$GIO_CFLAGS$ac_delim ++_ACEOF + +- if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` = $ac_delim_num; then ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then + break + elif $ac_last_try; then +- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi + done +-rm -f conf$$subs.sh + +-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +-cat >>"\$tmp/subs1.awk" <<\\_ACAWK && +-_ACEOF +-sed -n ' +-h +-s/^/S["/; s/!.*/"]=/ +-p +-g +-s/^[^!]*!// +-:repl +-t repl +-s/'"$ac_delim"'$// +-t delim +-:nl +-h +-s/\(.\{148\}\).*/\1/ +-t more1 +-s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +-p +-n +-b repl +-:more1 +-s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +-p +-g +-s/.\{148\}// +-t nl +-:delim +-h +-s/\(.\{148\}\).*/\1/ +-t more2 +-s/["\\]/\\&/g; s/^/"/; s/$/"/ +-p +-b +-:more2 +-s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +-p +-g +-s/.\{148\}// +-t delim +-' >$CONFIG_STATUS || ac_write_fail=1 +-rm -f conf$$subs.awk +-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +-_ACAWK +-cat >>"\$tmp/subs1.awk" <<_ACAWK && +- for (key in S) S_is_set[key] = 1 +- FS = "" ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` ++if test -n "$ac_eof"; then ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ++ ac_eof=`expr $ac_eof + 1` ++fi + +-} +-{ +- line = $ 0 +- nfields = split(line, field, "@") +- substed = 0 +- len = length(field[1]) +- for (i = 2; i < nfields; i++) { +- key = field[i] +- keylen = length(key) +- if (S_is_set[key]) { +- value = S[key] +- line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) +- len += length(value) + length(field[++i]) +- substed = 1 +- } else +- len += 1 + keylen +- } ++cat >>$CONFIG_STATUS <<_ACEOF ++cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b ++_ACEOF ++sed ' ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g ++s/^/s,@/; s/!/@,|#_!!_#|/ ++:n ++t n ++s/'"$ac_delim"'$/,g/; t ++s/$/\\/; p ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ++' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF ++CEOF$ac_eof ++_ACEOF + +- print line +-} + +-_ACAWK ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ cat >conf$$subs.sed <<_ACEOF ++GIO_LIBS!$GIO_LIBS$ac_delim ++GTK_ENGINE_DIR!$GTK_ENGINE_DIR$ac_delim ++FONT_CAPPLET_CFLAGS!$FONT_CAPPLET_CFLAGS$ac_delim ++FONT_CAPPLET_LIBS!$FONT_CAPPLET_LIBS$ac_delim ++AT_CAPPLET_CFLAGS!$AT_CAPPLET_CFLAGS$ac_delim ++AT_CAPPLET_LIBS!$AT_CAPPLET_LIBS$ac_delim ++HAVE_RANDR_TRUE!$HAVE_RANDR_TRUE$ac_delim ++HAVE_RANDR_FALSE!$HAVE_RANDR_FALSE$ac_delim ++DISPLAY_CAPPLET_CFLAGS!$DISPLAY_CAPPLET_CFLAGS$ac_delim ++DISPLAY_CAPPLET_LIBS!$DISPLAY_CAPPLET_LIBS$ac_delim ++XCURSOR_CFLAGS!$XCURSOR_CFLAGS$ac_delim ++XCURSOR_LIBS!$XCURSOR_LIBS$ac_delim ++HAVE_XCURSOR_TRUE!$HAVE_XCURSOR_TRUE$ac_delim ++HAVE_XCURSOR_FALSE!$HAVE_XCURSOR_FALSE$ac_delim ++LIBGNOMEKBD_CFLAGS!$LIBGNOMEKBD_CFLAGS$ac_delim ++LIBGNOMEKBD_LIBS!$LIBGNOMEKBD_LIBS$ac_delim ++LIBGNOMEKBDUI_CFLAGS!$LIBGNOMEKBDUI_CFLAGS$ac_delim ++LIBGNOMEKBDUI_LIBS!$LIBGNOMEKBDUI_LIBS$ac_delim ++LIBEBOOK_CFLAGS!$LIBEBOOK_CFLAGS$ac_delim ++LIBEBOOK_LIBS!$LIBEBOOK_LIBS$ac_delim ++BUILD_ABOUTME_TRUE!$BUILD_ABOUTME_TRUE$ac_delim ++BUILD_ABOUTME_FALSE!$BUILD_ABOUTME_FALSE$ac_delim ++HAL_CFLAGS!$HAL_CFLAGS$ac_delim ++HAL_LIBS!$HAL_LIBS$ac_delim ++GLIB_GENMARSHAL!$GLIB_GENMARSHAL$ac_delim ++GCONFTOOL!$GCONFTOOL$ac_delim ++GCONF_SCHEMA_CONFIG_SOURCE!$GCONF_SCHEMA_CONFIG_SOURCE$ac_delim ++GCONF_SCHEMA_FILE_DIR!$GCONF_SCHEMA_FILE_DIR$ac_delim ++GCONF_SCHEMAS_INSTALL_TRUE!$GCONF_SCHEMAS_INSTALL_TRUE$ac_delim ++GCONF_SCHEMAS_INSTALL_FALSE!$GCONF_SCHEMAS_INSTALL_FALSE$ac_delim ++GST_CFLAGS!$GST_CFLAGS$ac_delim ++GST_LIBS!$GST_LIBS$ac_delim ++HAVE_GSTREAMER_TRUE!$HAVE_GSTREAMER_TRUE$ac_delim ++HAVE_GSTREAMER_FALSE!$HAVE_GSTREAMER_FALSE$ac_delim ++CANBERRA_CFLAGS!$CANBERRA_CFLAGS$ac_delim ++CANBERRA_LIBS!$CANBERRA_LIBS$ac_delim ++SOUND_CAPPLET_LIBS!$SOUND_CAPPLET_LIBS$ac_delim ++SOUND_CAPPLET_CFLAGS!$SOUND_CAPPLET_CFLAGS$ac_delim ++BUILD_SOUND_TRUE!$BUILD_SOUND_TRUE$ac_delim ++BUILD_SOUND_FALSE!$BUILD_SOUND_FALSE$ac_delim ++GNOMECC_CAPPLETS_EXTRA_DIST!$GNOMECC_CAPPLETS_EXTRA_DIST$ac_delim ++GNOMECC_CAPPLETS_CLEANFILES!$GNOMECC_CAPPLETS_CLEANFILES$ac_delim ++GNOMECC_CAPPLETS_CFLAGS!$GNOMECC_CAPPLETS_CFLAGS$ac_delim ++GNOMECC_CAPPLETS_LIBS!$GNOMECC_CAPPLETS_LIBS$ac_delim ++UPDATE_MIME_DATABASE!$UPDATE_MIME_DATABASE$ac_delim ++ENABLE_UPDATE_MIMEDB_TRUE!$ENABLE_UPDATE_MIMEDB_TRUE$ac_delim ++ENABLE_UPDATE_MIMEDB_FALSE!$ENABLE_UPDATE_MIMEDB_FALSE$ac_delim ++LIBOBJS!$LIBOBJS$ac_delim ++LTLIBOBJS!$LTLIBOBJS$ac_delim + _ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +-if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then +- sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +-else +- cat +-fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ +- || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5 +-$as_echo "$as_me: error: could not setup config files machinery" >&2;} ++ ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 49; then ++ break ++ elif $ac_last_try; then ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " ++ fi ++done ++ ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` ++if test -n "$ac_eof"; then ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ++ ac_eof=`expr $ac_eof + 1` ++fi ++ ++cat >>$CONFIG_STATUS <<_ACEOF ++cat >"\$tmp/subs-3.sed" <<\CEOF$ac_eof ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end ++_ACEOF ++sed ' ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g ++s/^/s,@/; s/!/@,|#_!!_#|/ ++:n ++t n ++s/'"$ac_delim"'$/,g/; t ++s/$/\\/; p ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ++' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF ++:end ++s/|#_!!_#|//g ++CEOF$ac_eof + _ACEOF + ++ + # VPATH may cause trouble with some makes, so we remove $(srcdir), + # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and + # trailing colons and then remove the whole line if VPATH becomes empty +@@ -29628,133 +29554,19 @@ + }' + fi + +-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++cat >>$CONFIG_STATUS <<\_ACEOF + fi # test -n "$CONFIG_FILES" + +-# Set up the scripts for CONFIG_HEADERS section. +-# No need to generate them if there are no CONFIG_HEADERS. +-# This happens for instance with `./config.status Makefile'. +-if test -n "$CONFIG_HEADERS"; then +-cat >"$tmp/defines.awk" <<\_ACAWK || +-BEGIN { +-_ACEOF +- +-# Transform confdefs.h into an awk script `defines.awk', embedded as +-# here-document in config.status, that substitutes the proper values into +-# config.h.in to produce config.h. + +-# Create a delimiter string that does not exist in confdefs.h, to ease +-# handling of long lines. +-ac_delim='%!_!# ' +-for ac_last_try in false false :; do +- ac_t=`sed -n "/$ac_delim/p" confdefs.h` +- if test -z "$ac_t"; then +- break +- elif $ac_last_try; then +- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5 +-$as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;} +- { (exit 1); exit 1; }; } +- else +- ac_delim="$ac_delim!$ac_delim _$ac_delim!! " +- fi +-done +- +-# For the awk script, D is an array of macro values keyed by name, +-# likewise P contains macro parameters if any. Preserve backslash +-# newline sequences. +- +-ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +-sed -n ' +-s/.\{148\}/&'"$ac_delim"'/g +-t rset +-:rset +-s/^[ ]*#[ ]*define[ ][ ]*/ / +-t def +-d +-:def +-s/\\$// +-t bsnl +-s/["\\]/\\&/g +-s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +-D["\1"]=" \3"/p +-s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p +-d +-:bsnl +-s/["\\]/\\&/g +-s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +-D["\1"]=" \3\\\\\\n"\\/p +-t cont +-s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p +-t cont +-d +-:cont +-n +-s/.\{148\}/&'"$ac_delim"'/g +-t clear +-:clear +-s/\\$// +-t bsnlc +-s/["\\]/\\&/g; s/^/"/; s/$/"/p +-d +-:bsnlc +-s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p +-b cont +-' >$CONFIG_STATUS || ac_write_fail=1 +- +-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +- for (key in D) D_is_set[key] = 1 +- FS = "" +-} +-/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { +- line = \$ 0 +- split(line, arg, " ") +- if (arg[1] == "#") { +- defundef = arg[2] +- mac1 = arg[3] +- } else { +- defundef = substr(arg[1], 2) +- mac1 = arg[2] +- } +- split(mac1, mac2, "(") #) +- macro = mac2[1] +- if (D_is_set[macro]) { +- # Preserve the white space surrounding the "#". +- prefix = substr(line, 1, index(line, defundef) - 1) +- print prefix "define", macro P[macro] D[macro] +- next +- } else { +- # Replace #undef with comments. This is necessary, for example, +- # in the case of _POSIX_SOURCE, which is predefined and required +- # on some systems where configure will not decide to define it. +- if (defundef == "undef") { +- print "/*", line, "*/" +- next +- } +- } +-} +-{ print } +-_ACAWK +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +- { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5 +-$as_echo "$as_me: error: could not setup config headers machinery" >&2;} +- { (exit 1); exit 1; }; } +-fi # test -n "$CONFIG_HEADERS" +- +- +-eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" +-shift +-for ac_tag ++for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS + do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; +- :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 +-$as_echo "$as_me: error: Invalid tag $ac_tag." >&2;} ++ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 ++echo "$as_me: error: Invalid tag $ac_tag." >&2;} + { (exit 1); exit 1; }; };; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; +@@ -29783,38 +29595,26 @@ + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || +- { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 +-$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;} ++ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 ++echo "$as_me: error: cannot find input file: $ac_f" >&2;} + { (exit 1); exit 1; }; };; + esac +- case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac +- ac_file_inputs="$ac_file_inputs '$ac_f'" ++ ac_file_inputs="$ac_file_inputs $ac_f" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ +- configure_input='Generated from '` +- $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' +- `' by configure.' ++ configure_input="Generated from "`IFS=: ++ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" +- { $as_echo "$as_me:$LINENO: creating $ac_file" >&5 +-$as_echo "$as_me: creating $ac_file" >&6;} ++ { echo "$as_me:$LINENO: creating $ac_file" >&5 ++echo "$as_me: creating $ac_file" >&6;} + fi +- # Neutralize special characters interpreted by sed in replacement strings. +- case $configure_input in #( +- *\&* | *\|* | *\\* ) +- ac_sed_conf_input=`$as_echo "$configure_input" | +- sed 's/[\\\\&|]/\\\\&/g'`;; #( +- *) ac_sed_conf_input=$configure_input;; +- esac + + case $ac_tag in +- *:-:* | *:-) cat >"$tmp/stdin" \ +- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +-$as_echo "$as_me: error: could not create $ac_file" >&2;} +- { (exit 1); exit 1; }; } ;; ++ *:-:* | *:-) cat >"$tmp/stdin";; + esac + ;; + esac +@@ -29824,7 +29624,7 @@ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +-$as_echo X"$ac_file" | ++echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q +@@ -29850,7 +29650,7 @@ + as_dirs= + while :; do + case $as_dir in #( +- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" +@@ -29859,7 +29659,7 @@ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +-$as_echo X"$as_dir" | ++echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q +@@ -29880,17 +29680,17 @@ + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" +- } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +-$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 ++echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } + ac_builddir=. + + case "$ac_dir" in + .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) +- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` ++ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A ".." for each directory in $ac_dir_suffix. +- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; +@@ -29935,13 +29735,12 @@ + esac + _ACEOF + +-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++cat >>$CONFIG_STATUS <<\_ACEOF + # If the template does not know about datarootdir, expand it. + # FIXME: This hack should be removed a few years after 2.60. + ac_datarootdir_hack=; ac_datarootdir_seen= + +-ac_sed_dataroot=' +-/datarootdir/ { ++case `sed -n '/datarootdir/ { + p + q + } +@@ -29950,14 +29749,13 @@ + /@infodir@/p + /@localedir@/p + /@mandir@/p +-' +-case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in ++' $ac_file_inputs` in + *datarootdir*) ac_datarootdir_seen=yes;; + *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) +- { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +-$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 ++echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} + _ACEOF +-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++cat >>$CONFIG_STATUS <<_ACEOF + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g +@@ -29971,16 +29769,15 @@ + # Neutralize VPATH when `$srcdir' = `.'. + # Shell code in configure.ac might set extrasub. + # FIXME: do we really want to maintain this feature? +-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +-ac_sed_extra="$ac_vpsub ++cat >>$CONFIG_STATUS <<_ACEOF ++ sed "$ac_vpsub + $extrasub + _ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++cat >>$CONFIG_STATUS <<\_ACEOF + :t + /@[a-zA-Z_][a-zA-Z_0-9]*@/!b +-s|@configure_input@|$ac_sed_conf_input|;t t ++s&@configure_input@&$configure_input&;t t + s&@top_builddir@&$ac_top_builddir_sub&;t t +-s&@top_build_prefix@&$ac_top_build_prefix&;t t + s&@srcdir@&$ac_srcdir&;t t + s&@abs_srcdir@&$ac_abs_srcdir&;t t + s&@top_srcdir@&$ac_top_srcdir&;t t +@@ -29991,60 +29788,121 @@ + s&@INSTALL@&$ac_INSTALL&;t t + s&@MKDIR_P@&$ac_MKDIR_P&;t t + $ac_datarootdir_hack +-" +-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ +- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +-$as_echo "$as_me: error: could not create $ac_file" >&2;} +- { (exit 1); exit 1; }; } ++" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" | sed -f "$tmp/subs-3.sed" >$tmp/out + + test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && +- { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' + which seems to be undefined. Please make sure it is defined." >&5 +-$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' + which seems to be undefined. Please make sure it is defined." >&2;} + + rm -f "$tmp/stdin" + case $ac_file in +- -) cat "$tmp/out" && rm -f "$tmp/out";; +- *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; +- esac \ +- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +-$as_echo "$as_me: error: could not create $ac_file" >&2;} +- { (exit 1); exit 1; }; } ++ -) cat "$tmp/out"; rm -f "$tmp/out";; ++ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; ++ esac + ;; + :H) + # + # CONFIG_HEADER + # ++_ACEOF ++ ++# Transform confdefs.h into a sed script `conftest.defines', that ++# substitutes the proper values into config.h.in to produce config.h. ++rm -f conftest.defines conftest.tail ++# First, append a space to every undef/define line, to ease matching. ++echo 's/$/ /' >conftest.defines ++# Then, protect against being on the right side of a sed subst, or in ++# an unquoted here document, in config.status. If some macros were ++# called several times there might be several #defines for the same ++# symbol, which is useless. But do not sort them, since the last ++# AC_DEFINE must be honored. ++ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* ++# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where ++# NAME is the cpp macro being defined, VALUE is the value it is being given. ++# PARAMS is the parameter list in the macro definition--in most cases, it's ++# just an empty string. ++ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*' ++ac_dB='\\)[ (].*,\\1define\\2' ++ac_dC=' ' ++ac_dD=' ,' ++ ++uniq confdefs.h | ++ sed -n ' ++ t rset ++ :rset ++ s/^[ ]*#[ ]*define[ ][ ]*// ++ t ok ++ d ++ :ok ++ s/[\\&,]/\\&/g ++ s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p ++ s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p ++ ' >>conftest.defines ++ ++# Remove the space that was appended to ease matching. ++# Then replace #undef with comments. This is necessary, for ++# example, in the case of _POSIX_SOURCE, which is predefined and required ++# on some systems where configure will not decide to define it. ++# (The regexp can be short, since the line contains either #define or #undef.) ++echo 's/ $// ++s,^[ #]*u.*,/* & */,' >>conftest.defines ++ ++# Break up conftest.defines: ++ac_max_sed_lines=50 ++ ++# First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1" ++# Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2" ++# Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1" ++# et cetera. ++ac_in='$ac_file_inputs' ++ac_out='"$tmp/out1"' ++ac_nxt='"$tmp/out2"' ++ ++while : ++do ++ # Write a here document: ++ cat >>$CONFIG_STATUS <<_ACEOF ++ # First, check the format of the line: ++ cat >"\$tmp/defines.sed" <<\\CEOF ++/^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def ++/^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def ++b ++:def ++_ACEOF ++ sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS ++ echo 'CEOF ++ sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS ++ ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in ++ sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail ++ grep . conftest.tail >/dev/null || break ++ rm -f conftest.defines ++ mv conftest.tail conftest.defines ++done ++rm -f conftest.defines conftest.tail ++ ++echo "ac_result=$ac_in" >>$CONFIG_STATUS ++cat >>$CONFIG_STATUS <<\_ACEOF + if test x"$ac_file" != x-; then +- { +- $as_echo "/* $configure_input */" \ +- && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" +- } >"$tmp/config.h" \ +- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +-$as_echo "$as_me: error: could not create $ac_file" >&2;} +- { (exit 1); exit 1; }; } +- if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then +- { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5 +-$as_echo "$as_me: $ac_file is unchanged" >&6;} ++ echo "/* $configure_input */" >"$tmp/config.h" ++ cat "$ac_result" >>"$tmp/config.h" ++ if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then ++ { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 ++echo "$as_me: $ac_file is unchanged" >&6;} + else +- rm -f "$ac_file" +- mv "$tmp/config.h" "$ac_file" \ +- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +-$as_echo "$as_me: error: could not create $ac_file" >&2;} +- { (exit 1); exit 1; }; } ++ rm -f $ac_file ++ mv "$tmp/config.h" $ac_file + fi + else +- $as_echo "/* $configure_input */" \ +- && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ +- || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5 +-$as_echo "$as_me: error: could not create -" >&2;} +- { (exit 1); exit 1; }; } ++ echo "/* $configure_input */" ++ cat "$ac_result" + fi +-# Compute "$ac_file"'s index in $config_headers. +-_am_arg="$ac_file" ++ rm -f "$tmp/out12" ++# Compute $ac_file's index in $config_headers. ++_am_arg=$ac_file + _am_stamp_count=1 + for _am_header in $config_headers :; do + case $_am_header in +@@ -30059,7 +29917,7 @@ + X"$_am_arg" : 'X\(//\)[^/]' \| \ + X"$_am_arg" : 'X\(//\)$' \| \ + X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || +-$as_echo X"$_am_arg" | ++echo X"$_am_arg" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q +@@ -30079,8 +29937,8 @@ + s/.*/./; q'`/stamp-h$_am_stamp_count + ;; + +- :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5 +-$as_echo "$as_me: executing $ac_file commands" >&6;} ++ :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5 ++echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac + +@@ -30102,7 +29960,7 @@ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ + X"$mf" : 'X\(/\)' \| . 2>/dev/null || +-$as_echo X"$mf" | ++echo X"$mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q +@@ -30146,7 +30004,7 @@ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ + X"$file" : 'X\(/\)' \| . 2>/dev/null || +-$as_echo X"$file" | ++echo X"$file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q +@@ -30172,7 +30030,7 @@ + as_dirs= + while :; do + case $as_dir in #( +- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" +@@ -30181,7 +30039,7 @@ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +-$as_echo X"$as_dir" | ++echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q +@@ -30202,8 +30060,8 @@ + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" +- } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +-$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 ++echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" +@@ -30223,8 +30081,8 @@ + "$srcdir/po/POTFILES.in" | sed '$!s/$/ \\/' >"po/POTFILES" + + if test ! -f "po/Makefile"; then +- { { $as_echo "$as_me:$LINENO: error: po/Makefile is not ready." >&5 +-$as_echo "$as_me: error: po/Makefile is not ready." >&2;} ++ { { echo "$as_me:$LINENO: error: po/Makefile is not ready." >&5 ++echo "$as_me: error: po/Makefile is not ready." >&2;} + { (exit 1); exit 1; }; } + fi + mv "po/Makefile" "po/Makefile.tmp" +@@ -30246,11 +30104,6 @@ + chmod +x $CONFIG_STATUS + ac_clean_files=$ac_clean_files_save + +-test $ac_write_fail = 0 || +- { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5 +-$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;} +- { (exit 1); exit 1; }; } +- + + # configure is writing to config.log, and then calls config.status. + # config.status does its own redirection, appending to config.log. +@@ -30272,8 +30125,4 @@ + # would make configure fail if this is the last instruction. + $ac_cs_success || { (exit 1); exit 1; } + fi +-if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then +- { $as_echo "$as_me:$LINENO: WARNING: Unrecognized options: $ac_unrecognized_opts" >&5 +-$as_echo "$as_me: WARNING: Unrecognized options: $ac_unrecognized_opts" >&2;} +-fi + +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.24.0.1/help/Makefile.in gnome-control-center-2.24.0.1.new/help/Makefile.in +--- gnome-control-center-2.24.0.1/help/Makefile.in 2008-09-24 21:58:34.000000000 +0200 ++++ gnome-control-center-2.24.0.1.new/help/Makefile.in 2008-09-24 21:58:47.000000000 +0200 +@@ -288,7 +288,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + _clean_doc_header = $(if $(DOC_H_FILE),clean-doc-header) +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.24.0.1/libslab/Makefile.in gnome-control-center-2.24.0.1.new/libslab/Makefile.in +--- gnome-control-center-2.24.0.1/libslab/Makefile.in 2008-09-24 21:58:34.000000000 +0200 ++++ gnome-control-center-2.24.0.1.new/libslab/Makefile.in 2008-09-24 21:58:48.000000000 +0200 +@@ -336,7 +336,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + INCLUDES = \ +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.24.0.1/libwindow-settings/Makefile.in gnome-control-center-2.24.0.1.new/libwindow-settings/Makefile.in +--- gnome-control-center-2.24.0.1/libwindow-settings/Makefile.in 2008-09-24 21:58:36.000000000 +0200 ++++ gnome-control-center-2.24.0.1.new/libwindow-settings/Makefile.in 2008-09-24 21:58:48.000000000 +0200 +@@ -317,7 +317,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + WM_MODULE_DIR = $(libdir)/libgnome-window-settings1 +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.24.0.1/Makefile.in gnome-control-center-2.24.0.1.new/Makefile.in +--- gnome-control-center-2.24.0.1/Makefile.in 2008-09-24 21:58:34.000000000 +0200 ++++ gnome-control-center-2.24.0.1.new/Makefile.in 2008-09-24 21:58:48.000000000 +0200 +@@ -293,7 +293,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + SUBDIRS = po libwindow-settings libslab capplets shell help \ +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.24.0.1/shell/Makefile.in gnome-control-center-2.24.0.1.new/shell/Makefile.in +--- gnome-control-center-2.24.0.1/shell/Makefile.in 2008-09-24 21:58:33.000000000 +0200 ++++ gnome-control-center-2.24.0.1.new/shell/Makefile.in 2008-09-24 21:58:48.000000000 +0200 +@@ -302,7 +302,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + INCLUDES = \ +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.24.0.1/typing-break/Makefile.in gnome-control-center-2.24.0.1.new/typing-break/Makefile.in +--- gnome-control-center-2.24.0.1/typing-break/Makefile.in 2008-09-24 21:58:34.000000000 +0200 ++++ gnome-control-center-2.24.0.1.new/typing-break/Makefile.in 2008-09-24 21:58:48.000000000 +0200 +@@ -308,7 +308,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + gnome_typing_monitor_SOURCES = \ --- gnome-control-center-2.24.0.1.orig/debian/patches/26_add_touchpad_to_mouse_settings.patch +++ gnome-control-center-2.24.0.1/debian/patches/26_add_touchpad_to_mouse_settings.patch @@ -0,0 +1,310 @@ +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.21.90/capplets/mouse/gnome-mouse-properties.c gnome-control-center-2.21.90.new/capplets/mouse/gnome-mouse-properties.c +--- gnome-control-center-2.21.90/capplets/mouse/gnome-mouse-properties.c 2008-02-14 09:15:50.000000000 +0000 ++++ gnome-control-center-2.21.90.new/capplets/mouse/gnome-mouse-properties.c 2008-02-14 09:18:13.000000000 +0000 +@@ -41,6 +41,7 @@ + #include + #include + #include ++#include + + #ifdef HAVE_XCURSOR + #include +@@ -341,6 +342,35 @@ + return new_value; + } + ++static gboolean ++find_synaptics() ++{ ++ int numdevices, i; ++ gboolean ret = FALSE; ++ XDeviceInfo *devicelist = XListInputDevices (GDK_DISPLAY(), &numdevices); ++ for (i = 0; i < numdevices; i++) { ++ if (strcmp (devicelist[i].name, "Synaptics Touchpad") == 0) ++ ret = TRUE; ++ } ++ ++ XFreeDeviceList(devicelist); ++ return ret; ++} ++ ++ ++static void ++touchpad_enabled_toggle_cb (GtkToggleButton *button, GladeXML *dialog) ++{ ++ gboolean active; ++ ++ active = gtk_toggle_button_get_active (button); ++ ++ gtk_widget_set_sensitive (WID ("tap_to_click_toggle"), active); ++ gtk_widget_set_sensitive (WID ("vert_scroll_toggle"), active); ++ gtk_widget_set_sensitive (WID ("horiz_scroll_toggle"), active); ++ ++} ++ + /* Set up the property editors in the dialog. */ + static void + setup_dialog (GladeXML *dialog, GConfChangeSet *changeset) +@@ -387,6 +417,23 @@ + (changeset, "/desktop/gnome/peripherals/mouse/drag_threshold", WID ("drag_threshold_scale"), + "conv-to-widget-cb", drag_threshold_from_gconf, + NULL); ++ ++ /* Trackpad page */ ++ if (find_synaptics() == FALSE) ++ gtk_notebook_remove_page (GTK_NOTEBOOK(WID("prefs_widget")),-1); ++ else { ++ g_signal_connect (G_OBJECT (WID ("touchpad_enabled_toggle")), "toggled", (GCallback) touchpad_enabled_toggle_cb, dialog); ++ ++ peditor = gconf_peditor_new_boolean ++ (changeset, "/desktop/gnome/peripherals/mouse/touchpad_enabled", WID ("touchpad_enabled_toggle"), NULL); ++ peditor = gconf_peditor_new_boolean ++ (changeset, "/desktop/gnome/peripherals/mouse/tap_to_click", WID ("tap_to_click_toggle"), NULL); ++ peditor = gconf_peditor_new_boolean ++ (changeset, "/desktop/gnome/peripherals/mouse/pad_vert_scroll", WID ("vert_scroll_toggle"), NULL); ++ peditor = gconf_peditor_new_boolean ++ (changeset, "/desktop/gnome/peripherals/mouse/pad_horiz_scroll", WID ("horiz_scroll_toggle"), NULL); ++ } ++ + } + + /* Construct the dialog */ +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.21.90/capplets/mouse/gnome-mouse-properties.glade gnome-control-center-2.21.90.new/capplets/mouse/gnome-mouse-properties.glade +--- gnome-control-center-2.21.90/capplets/mouse/gnome-mouse-properties.glade 2008-02-14 09:15:50.000000000 +0000 ++++ gnome-control-center-2.21.90.new/capplets/mouse/gnome-mouse-properties.glade 2008-02-14 09:17:39.000000000 +0000 +@@ -1288,6 +1288,235 @@ + False + + ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ 12 ++ 18 ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ 6 ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ 0 ++ 0 ++ <b>General</b> ++ True ++ ++ ++ False ++ False ++ ++ ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ 0 ++ 0 ++ ++ ++ ++ False ++ False ++ ++ ++ ++ ++ True ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ Enable _touchpad ++ True ++ 0 ++ True ++ True ++ ++ ++ 1 ++ ++ ++ ++ ++ False ++ False ++ 1 ++ ++ ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ 0 ++ 0 ++ ++ ++ ++ False ++ False ++ ++ ++ ++ ++ True ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ Enable mouse _clicks with touchpad ++ True ++ 0 ++ True ++ True ++ ++ ++ 1 ++ ++ ++ ++ ++ False ++ False ++ 2 ++ ++ ++ ++ ++ False ++ False ++ ++ ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ 6 ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ 0 ++ 0 ++ <b>Scrolling</b> ++ True ++ ++ ++ False ++ False ++ ++ ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ 0 ++ 0 ++ ++ ++ ++ False ++ False ++ ++ ++ ++ ++ True ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ Enable _vertical scrolling ++ True ++ 0 ++ True ++ True ++ ++ ++ 1 ++ ++ ++ ++ ++ False ++ False ++ 1 ++ ++ ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ 0 ++ 0 ++ ++ ++ ++ False ++ False ++ ++ ++ ++ ++ True ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ Enable _horizontal scrolling ++ True ++ 0 ++ True ++ ++ ++ 1 ++ ++ ++ ++ ++ False ++ False ++ 2 ++ ++ ++ ++ ++ False ++ False ++ 1 ++ ++ ++ ++ ++ 2 ++ ++ ++ ++ ++ True ++ Touchpad ++ GTK_JUSTIFY_CENTER ++ ++ ++ tab ++ 2 ++ False ++ ++ + + + 1 --- gnome-control-center-2.24.0.1.orig/debian/patches/107_rr_NULL_output_name.patch +++ gnome-control-center-2.24.0.1/debian/patches/107_rr_NULL_output_name.patch @@ -0,0 +1,12 @@ +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.23.90/capplets/display/xrandr-capplet.c gnome-control-center-2.23.90.new/capplets/display/xrandr-capplet.c +--- gnome-control-center-2.23.90/capplets/display/xrandr-capplet.c 2008-09-13 00:01:32.000000000 +0100 ++++ gnome-control-center-2.23.90.new/capplets/display/xrandr-capplet.c 2008-09-13 00:05:08.000000000 +0100 +@@ -168,7 +168,7 @@ + char *cur_name = + app->current_output? app->current_output->name : NULL; + +- if ((cur_name && strcmp (output->name, cur_name) == 0) || !best) ++ if ((cur_name && output->name && strcmp (output->name, cur_name) == 0) || !best) + best = output; + } + } --- gnome-control-center-2.24.0.1.orig/debian/patches/04_path_xtra.patch +++ gnome-control-center-2.24.0.1/debian/patches/04_path_xtra.patch @@ -0,0 +1,12 @@ +diff -urNad control-center-2.18.0/configure.in control-center-2.18.0.new/configure.in +--- control-center-2.18.0/configure.in 2007-03-26 17:11:41.000000000 +0200 ++++ control-center-2.18.0.new/configure.in 2007-03-26 17:13:46.000000000 +0200 +@@ -52,7 +52,7 @@ + AC_CHECK_FUNCS(putenv) + AC_CHECK_FUNCS(setenv) + +-AC_PATH_XTRA ++AC_PATH_XTRA( [X11], [X11/Xlib.h], [XSync ()]) + x_libs="$X_PRE_LIBS $X_LIBS -lX11 $X_EXTRA_LIBS" + + AC_CHECK_FUNC(XScreenSaverQueryInfo, [ --- gnome-control-center-2.24.0.1.orig/debian/patches/97_subpixel_hinting_defaults.patch +++ gnome-control-center-2.24.0.1/debian/patches/97_subpixel_hinting_defaults.patch @@ -0,0 +1,12 @@ +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.22.1/capplets/appearance/appearance-font.c gnome-control-center-2.22.1.new/capplets/appearance/appearance-font.c +--- gnome-control-center-2.22.1/capplets/appearance/appearance-font.c 2008-03-27 13:12:29.000000000 +0000 ++++ gnome-control-center-2.22.1.new/capplets/appearance/appearance-font.c 2008-06-04 16:53:06.000000000 +0100 +@@ -956,7 +956,7 @@ + ANTIALIAS_GRAYSCALE, HINT_FULL); + setup_font_pair (glade_xml_get_widget (data->xml, "subpixel_radio"), + glade_xml_get_widget (data->xml, "subpixel_sample"), +- ANTIALIAS_RGBA, HINT_FULL); ++ ANTIALIAS_RGBA, HINT_SLIGHT); + + font_render_load (data->client); + --- gnome-control-center-2.24.0.1.orig/debian/patches/50_ubuntu_systemwide_prefs.patch +++ gnome-control-center-2.24.0.1/debian/patches/50_ubuntu_systemwide_prefs.patch @@ -0,0 +1,2448 @@ +=== modified file 'capplets/network/gnome-network-preferences.c' +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.24.0/capplets/network/gnome-network-preferences.c gnome-control-center-2.24.0.new/capplets/network/gnome-network-preferences.c +--- gnome-control-center-2.24.0/capplets/network/gnome-network-preferences.c 2008-09-24 10:04:57.000000000 +0200 ++++ gnome-control-center-2.24.0.new/capplets/network/gnome-network-preferences.c 2008-09-24 10:05:03.000000000 +0200 +@@ -28,6 +28,7 @@ + #include + #include + #include ++#include + + #include "capplet-util.h" + #include "gconf-property-editor.h" +@@ -173,6 +174,246 @@ + } + } + ++static gboolean ++dbus_set_proxy_helper(DBusGProxy *dbus_proxy, ++ const char *proxy_type, ++ const char *host, ++ int port) ++{ ++ GError *error = NULL; ++ gboolean dbus_ret, res; ++ gchar *proxy_str = NULL; ++ ++ fprintf(stderr, "set_proxy_helper: '%s' '%s'\n", proxy_type, host); ++ ++ /* FIXME: add proxy auth support when a "secure" store for the proxy ++ password is available */ ++ proxy_str = g_strdup_printf("%s://%s:%i/", proxy_type, host, port); ++ g_print("p: %s\n", proxy_str); ++ ++ dbus_ret = dbus_g_proxy_call (dbus_proxy, "set_proxy", &error, ++ G_TYPE_STRING, proxy_type, ++ G_TYPE_STRING, proxy_str, ++ G_TYPE_INVALID, ++ G_TYPE_BOOLEAN, &res, ++ G_TYPE_INVALID); ++ ++ if(!dbus_ret) { ++ if (error->domain == DBUS_GERROR && ++ error->code == DBUS_GERROR_REMOTE_EXCEPTION) ++ g_printerr ("Caught remote method exception %s: %s", ++ dbus_g_error_get_name (error), ++ error->message); ++ else ++ g_printerr ("Error: %s\n", error->message); ++ g_error_free (error); ++ return FALSE; ++ } ++ g_print("set_proxy() returned: %i\n", res); ++ return TRUE; ++} ++ ++static gboolean ++dbus_reset_proxy_helper(DBusGProxy *dbus_proxy, const char *proxy_type) ++{ ++ GError *error = NULL; ++ gboolean dbus_ret, res; ++ ++ fprintf(stderr, "reseting proxy %s\n", proxy_type); ++ ++ dbus_ret = dbus_g_proxy_call (dbus_proxy, "set_proxy", &error, ++ G_TYPE_STRING, proxy_type, ++ G_TYPE_STRING, "", ++ G_TYPE_INVALID, ++ G_TYPE_BOOLEAN, &res, ++ G_TYPE_INVALID); ++ fprintf(stderr, "reset_proxy() returned: %i\n", res); ++ ++ if(!dbus_ret) ++ { ++ if (error->domain == DBUS_GERROR && ++ error->code == DBUS_GERROR_REMOTE_EXCEPTION) ++ g_printerr ("Caught remote method exception %s: %s", ++ dbus_g_error_get_name (error), ++ error->message); ++ else ++ g_printerr ("Error: %s\n", error->message); ++ g_error_free (error); ++ return FALSE; ++ } ++ return TRUE; ++} ++ ++static gboolean ++dbus_set_to_system_gconf_helper(DBusGProxy *dbus_proxy) ++{ ++ GConfClient *client; ++ GError *error = NULL; ++ gboolean dbus_ret; ++ gchar* include[] = {"/system/proxy","/system/http_proxy", NULL}; ++ gchar* exclude[] = {NULL}; ++ ++ fprintf(stderr, "set_set_to_system_gconf_helper\n"); ++ ++ client = gconf_client_get_default (); ++ gconf_client_suggest_sync (client, &error); ++ dbus_ret = dbus_g_proxy_call (dbus_proxy, "SetSystem", &error, ++ G_TYPE_STRV, include, ++ G_TYPE_STRV, exclude, ++ G_TYPE_INVALID, ++ G_TYPE_INVALID); ++ ++ if(!dbus_ret) { ++ if (error->domain == DBUS_GERROR && ++ error->code == DBUS_GERROR_REMOTE_EXCEPTION) ++ g_printerr ("Caught remote method exception %s: %s", ++ dbus_g_error_get_name (error), ++ error->message); ++ else ++ g_printerr ("Error: %s\n", error->message); ++ g_error_free (error); ++ return FALSE; ++ } ++ return TRUE; ++} ++ ++static void ++cb_reset_system_default (GtkButton *button, gpointer data) ++{ ++ GConfClient *client; ++ GError *error; ++ gboolean res; ++ ++ client = gconf_client_get_default (); ++ res = gconf_client_recursive_unset (client, "/system/proxy", 0, &error); ++ if(!res) ++ g_printerr("recursive_unset: %s", dbus_g_error_get_name(error), error->message); ++ res = gconf_client_recursive_unset (client, "/system/http_proxy", 0, &error); ++ if(!res) ++ g_printerr("recursive_unset: %s", dbus_g_error_get_name(error), error->message); ++} ++ ++static void ++cb_make_system_default (GtkButton *button, gpointer data) ++{ ++ DBusGConnection *systembus, *sessionbus; ++ GError *error = NULL; ++ DBusGProxy *dbus_proxy; ++ GConfClient *client; ++ gchar *http_proxy, *proxy_str, *ftp_proxy, *https_proxy; ++ gint http_port, ftp_port, https_port; ++ gboolean use_proxy; ++ gboolean res; ++ ++ GladeXML *dialog = (GladeXML *) data; ++ g_print ("cb_make_system_default\n"); ++ ++ // do ride the dbus ++ sessionbus = dbus_g_bus_get (DBUS_BUS_SESSION, &error); ++ if (sessionbus == NULL) { ++ g_printerr ("Failed to open connection to bus: %s\n", ++ error->message); ++ g_error_free (error); ++ return; ++ } ++ ++ dbus_proxy = dbus_g_proxy_new_for_name (sessionbus, ++ "org.freedesktop.PolicyKit.AuthenticationAgent", ++ "/", ++ "org.freedesktop.PolicyKit.AuthenticationAgent"); ++ if (dbus_proxy == NULL) { ++ g_printerr ("Failed to get proxy: %s\n", ++ error->message); ++ g_error_free (error); ++ return; ++ } ++ ++ if (!dbus_g_proxy_call (dbus_proxy, "ObtainAuthorization", &error, ++ G_TYPE_STRING, "org.gnome.gconf.defaults.set-system", ++ G_TYPE_UINT, 0, ++ G_TYPE_UINT, getpid(), ++ G_TYPE_INVALID, ++ G_TYPE_BOOLEAN, &res, G_TYPE_INVALID)) ++ { ++ if (error->domain == DBUS_GERROR && ++ error->code == DBUS_GERROR_REMOTE_EXCEPTION) ++ g_printerr ("Caught remote method exception %s: %s", ++ dbus_g_error_get_name (error), ++ error->message); ++ else ++ g_printerr ("Error: %s\n", error->message); ++ g_error_free (error); ++ return; ++ } ++ g_object_unref(dbus_proxy); ++ g_print("ObtainAuth returned: %i\n", res); ++ // so we get a "0" here too if the auth is not required ?!? ++ // if(!res) ++ // return; ++ ++ // if we make it to this point, we have authorization to set the proxy ++ systembus = dbus_g_bus_get (DBUS_BUS_SYSTEM, &error); ++ dbus_proxy = dbus_g_proxy_new_for_name (systembus, ++ "com.ubuntu.SystemService", ++ "/", ++ "com.ubuntu.SystemService"); ++ if (dbus_proxy == NULL) { ++ g_printerr ("Failed to get proxy: %s\n", ++ error->message); ++ g_error_free (error); ++ return; ++ } ++ client = gconf_client_get_default (); ++ use_proxy = gconf_client_get_bool (client, USE_PROXY_KEY, NULL); ++ ++ if (use_proxy) { ++ // read the proxy settings ++ http_proxy = gconf_client_get_string (client, HTTP_PROXY_HOST_KEY, NULL); ++ http_port = gconf_client_get_int (client, HTTP_PROXY_PORT_KEY, NULL); ++ if(http_proxy == NULL || strlen(http_proxy) == 0) ++ dbus_reset_proxy_helper(dbus_proxy, "http"); ++ else ++ dbus_set_proxy_helper(dbus_proxy, "http", http_proxy, http_port); ++ ++ ftp_proxy = gconf_client_get_string (client, FTP_PROXY_HOST_KEY, NULL); ++ ftp_port = gconf_client_get_int (client, FTP_PROXY_PORT_KEY, NULL); ++ if(ftp_proxy == NULL || strlen(ftp_proxy) == 0) ++ dbus_reset_proxy_helper(dbus_proxy, "ftp"); ++ else ++ dbus_set_proxy_helper(dbus_proxy, "ftp", ftp_proxy, ftp_port); ++ ++ https_proxy = gconf_client_get_string (client, SECURE_PROXY_HOST_KEY, NULL); ++ https_port = gconf_client_get_int (client, SECURE_PROXY_PORT_KEY, NULL); ++ if(https_proxy == NULL || strlen(https_proxy) == 0) ++ dbus_reset_proxy_helper(dbus_proxy, "https"); ++ else ++ dbus_set_proxy_helper(dbus_proxy, "https", https_proxy, https_port); ++ g_object_unref(dbus_proxy); ++ } else { ++ // we don't use a proxy ++ dbus_reset_proxy_helper(dbus_proxy, "http"); ++ dbus_reset_proxy_helper(dbus_proxy, "ftp"); ++ dbus_reset_proxy_helper(dbus_proxy, "https"); ++ } ++ ++ ++ // set it to gconf as well ++ dbus_proxy = dbus_g_proxy_new_for_name (systembus, ++ "org.gnome.GConf.Defaults", ++ "/", ++ "org.gnome.GConf.Defaults"); ++ if (dbus_proxy == NULL) { ++ g_printerr ("Failed to get proxy: %s\n", ++ error->message); ++ g_error_free (error); ++ return; ++ } ++ dbus_set_to_system_gconf_helper(dbus_proxy); ++ ++ g_object_unref(dbus_proxy); ++} ++ ++ + static void + cb_dialog_response (GtkDialog *dialog, gint response_id) + { +@@ -441,7 +682,6 @@ + + mode_type = g_enum_register_static ("NetworkPreferencesProxyType", + proxytype_values); +- + /* There's a bug in peditors that cause them to not initialize the entry + * correctly. */ + client = gconf_client_get_default (); +@@ -515,7 +755,7 @@ + peditor = GCONF_PROPERTY_EDITOR (gconf_peditor_new_integer ( + NULL, SOCKS_PROXY_PORT_KEY, WID ("socks_port_spinbutton"), + NULL)); +- ++ + /* Set the proxy entries insensitive if we are using the same proxy for all */ + if (gconf_client_get_bool (client, USE_SAME_PROXY_KEY, NULL)) + { +@@ -550,6 +790,12 @@ + G_CALLBACK (cb_add_url), dialog); + g_signal_connect (WID ("button_remove_url"), "clicked", + G_CALLBACK (cb_remove_url), dialog); ++ ++ /* System-wide default */ ++ g_signal_connect(WID("button_make_system_default"), "clicked", ++ G_CALLBACK(cb_make_system_default), dialog); ++ g_signal_connect(WID("button_reset_to_defaults"), "clicked", ++ G_CALLBACK(cb_reset_system_default), dialog); + } + + int +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.24.0/capplets/network/gnome-network-preferences.glade gnome-control-center-2.24.0.new/capplets/network/gnome-network-preferences.glade +--- gnome-control-center-2.24.0/capplets/network/gnome-network-preferences.glade 2008-09-24 10:04:57.000000000 +0200 ++++ gnome-control-center-2.24.0.new/capplets/network/gnome-network-preferences.glade 2008-09-24 10:14:43.000000000 +0200 +@@ -1,1313 +1,844 @@ +- +- +- ++ ++ ++ + +- +- +- +- 5 +- Network Proxy Preferences +- GTK_WINDOW_TOPLEVEL +- GTK_WIN_POS_NONE +- False +- False +- False +- True +- False +- False +- GDK_WINDOW_TYPE_HINT_DIALOG +- GDK_GRAVITY_NORTH_WEST +- True +- False +- False +- +- +- +- True +- False +- 2 +- +- +- +- True +- GTK_BUTTONBOX_END +- +- +- +- True +- True +- True +- gtk-help +- True +- GTK_RELIEF_NORMAL +- True +- -11 +- +- +- +- +- +- True +- True +- True +- gtk-close +- True +- GTK_RELIEF_NORMAL +- True +- -7 +- +- +- +- +- 0 +- False +- True +- GTK_PACK_END +- +- +- +- +- +- 5 +- True +- True +- True +- True +- GTK_POS_TOP +- False +- False +- +- +- +- 12 +- True +- False +- 18 +- +- +- +- True +- True +- <b>Di_rect internet connection</b> +- True +- GTK_RELIEF_NORMAL +- True +- False +- False +- True +- +- +- 0 +- False +- False +- +- +- +- +- +- True +- False +- 18 +- +- +- +- True +- False +- 6 +- +- +- +- True +- True +- <b>_Manual proxy configuration</b> +- True +- GTK_RELIEF_NORMAL +- True +- False +- False +- True +- none_radiobutton +- +- +- 0 +- False +- False +- +- +- +- +- +- True +- False +- True +- _Use the same proxy for all protocols +- True +- GTK_RELIEF_NORMAL +- True +- False +- False +- True +- +- +- 0 +- False +- False +- +- +- +- +- +- True +- False +- False +- 0 +- +- +- +- True +- +- False +- False +- GTK_JUSTIFY_LEFT +- False +- False +- 0.5 +- 0.5 +- 0 +- 0 +- PANGO_ELLIPSIZE_NONE +- -1 +- False +- 0 +- +- +- 0 +- False +- False +- +- +- +- +- +- True +- 4 +- 5 +- False +- 6 +- 12 +- +- +- +- True +- H_TTP proxy: +- True +- False +- GTK_JUSTIFY_LEFT +- False +- False +- 0 +- 0.5 +- 0 +- 0 +- http_host_entry +- PANGO_ELLIPSIZE_NONE +- -1 +- False +- 0 +- +- +- 0 +- 1 +- 0 +- 1 +- fill +- +- +- +- +- +- +- True +- _Secure HTTP proxy: +- True +- False +- GTK_JUSTIFY_LEFT +- False +- False +- 0 +- 0.5 +- 0 +- 0 +- secure_host_entry +- PANGO_ELLIPSIZE_NONE +- -1 +- False +- 0 +- +- +- 0 +- 1 +- 1 +- 2 +- fill +- +- +- +- +- +- +- True +- _FTP proxy: +- True +- False +- GTK_JUSTIFY_LEFT +- False +- False +- 0 +- 0.5 +- 0 +- 0 +- ftp_host_entry +- PANGO_ELLIPSIZE_NONE +- -1 +- False +- 0 +- +- +- 0 +- 1 +- 2 +- 3 +- fill +- +- +- +- +- +- +- True +- S_ocks host: +- True +- False +- GTK_JUSTIFY_LEFT +- False +- False +- 0 +- 0.5 +- 0 +- 0 +- socks_host_entry +- PANGO_ELLIPSIZE_NONE +- -1 +- False +- 0 +- +- +- 0 +- 1 +- 3 +- 4 +- fill +- +- +- +- +- +- +- True +- True +- True +- True +- 0 +- +- True +- False +- +- +- 1 +- 2 +- 0 +- 1 +- +- +- +- +- +- +- True +- True +- True +- True +- 0 +- +- True +- False +- +- +- 1 +- 2 +- 1 +- 2 +- +- +- +- +- +- +- True +- True +- True +- True +- 0 +- +- True +- False +- +- +- 1 +- 2 +- 2 +- 3 +- +- +- +- +- +- +- True +- True +- True +- True +- 0 +- +- True +- False +- +- +- 1 +- 2 +- 3 +- 4 +- +- +- +- +- +- +- True +- Port: +- False +- False +- GTK_JUSTIFY_LEFT +- False +- False +- 0 +- 0.5 +- 0 +- 0 +- PANGO_ELLIPSIZE_NONE +- -1 +- False +- 0 +- +- +- +- +- +- 2 +- 3 +- 0 +- 1 +- fill +- +- +- +- +- +- +- True +- Port: +- False +- False +- GTK_JUSTIFY_LEFT +- False +- False +- 0 +- 0.5 +- 0 +- 0 +- PANGO_ELLIPSIZE_NONE +- -1 +- False +- 0 +- +- +- +- +- +- 2 +- 3 +- 1 +- 2 +- fill +- +- +- +- +- +- +- True +- Port: +- False +- False +- GTK_JUSTIFY_LEFT +- False +- False +- 0 +- 0.5 +- 0 +- 0 +- PANGO_ELLIPSIZE_NONE +- -1 +- False +- 0 +- +- +- +- +- +- 2 +- 3 +- 2 +- 3 +- fill +- +- +- +- +- +- +- True +- Port: +- False +- False +- GTK_JUSTIFY_LEFT +- False +- False +- 0 +- 0.5 +- 0 +- 0 +- PANGO_ELLIPSIZE_NONE +- -1 +- False +- 0 +- +- +- +- +- +- 2 +- 3 +- 3 +- 4 +- fill +- +- +- +- +- +- +- True +- True +- 1 +- 0 +- False +- GTK_UPDATE_ALWAYS +- False +- False +- 0 0 65535 1 10 0 +- +- +- +- +- +- 3 +- 4 +- 0 +- 1 +- +- +- +- +- +- +- True +- True +- 1 +- 0 +- False +- GTK_UPDATE_ALWAYS +- False +- False +- 0 0 65535 1 10 0 +- +- +- +- +- +- 3 +- 4 +- 1 +- 2 +- +- +- +- +- +- +- True +- True +- 1 +- 0 +- False +- GTK_UPDATE_ALWAYS +- False +- False +- 0 0 65535 1 10 0 +- +- +- +- +- +- 3 +- 4 +- 2 +- 3 +- +- +- +- +- +- +- True +- True +- 1 +- 0 +- False +- GTK_UPDATE_ALWAYS +- False +- False +- 0 0 65535 1 10 0 +- +- +- +- +- +- 3 +- 4 +- 3 +- 4 +- +- +- +- +- +- +- True +- True +- _Details +- True +- GTK_RELIEF_NORMAL +- True +- +- +- 4 +- 5 +- 0 +- 1 +- fill +- +- +- +- +- +- 0 +- True +- True +- +- +- +- +- 0 +- True +- True +- +- +- +- +- 0 +- True +- True +- +- +- +- +- +- True +- False +- 6 +- +- +- +- True +- True +- <b>_Automatic proxy configuration</b> +- True +- GTK_RELIEF_NORMAL +- True +- False +- False +- True +- none_radiobutton +- +- +- 0 +- False +- False +- +- +- +- +- +- True +- False +- 0 +- +- +- +- True +- +- False +- False +- GTK_JUSTIFY_LEFT +- False +- False +- 0.5 +- 0.5 +- 0 +- 0 +- PANGO_ELLIPSIZE_NONE +- -1 +- False +- 0 +- +- +- 0 +- False +- False +- +- +- +- +- +- True +- False +- False +- 12 +- +- +- +- True +- Autoconfiguration _URL: +- True +- False +- GTK_JUSTIFY_LEFT +- False +- False +- 0.5 +- 0.5 +- 0 +- 0 +- autoconfig_entry +- PANGO_ELLIPSIZE_NONE +- -1 +- False +- 0 +- +- +- 0 +- False +- False +- +- +- +- +- +- True +- True +- True +- True +- 0 +- +- True +- False +- +- +- 0 +- True +- True +- +- +- +- +- 0 +- True +- True +- +- +- +- +- 0 +- True +- True +- +- +- +- +- 0 +- False +- False +- +- +- +- +- 0 +- True +- True +- +- +- +- +- False +- True +- +- +- +- +- +- True +- Proxy Configuration +- False +- False +- GTK_JUSTIFY_LEFT +- False +- False +- 0.5 +- 0.5 +- 0 +- 0 +- PANGO_ELLIPSIZE_NONE +- -1 +- False +- 0 +- +- +- tab +- +- +- +- +- +- 12 +- True +- False +- 6 +- +- +- +- True +- <b>Ignore Host List</b> +- False +- False +- GTK_JUSTIFY_LEFT +- False +- False +- 0 +- 0.5 +- 0 +- 0 +- PANGO_ELLIPSIZE_NONE +- -1 +- False +- 0 +- +- +- 0 +- False +- False +- +- +- +- +- +- True +- False +- 0 +- +- +- +- True +- +- False +- False +- GTK_JUSTIFY_LEFT +- False +- False +- 0.5 +- 0.5 +- 0 +- 0 +- PANGO_ELLIPSIZE_NONE +- -1 +- False +- 0 +- +- +- 0 +- False +- False +- +- +- +- +- +- True +- 2 +- 2 +- False +- 6 +- 12 +- +- +- +- True +- True +- True +- True +- 0 +- +- True +- False +- +- +- 0 +- 1 +- 0 +- 1 +- +- +- +- +- +- +- True +- True +- gtk-add +- True +- GTK_RELIEF_NORMAL +- True +- +- +- 1 +- 2 +- 0 +- 1 +- fill +- +- +- +- +- +- +- True +- True +- GTK_POLICY_AUTOMATIC +- GTK_POLICY_AUTOMATIC +- GTK_SHADOW_IN +- GTK_CORNER_TOP_LEFT +- +- +- +- True +- True +- False +- False +- False +- True +- False +- False +- False +- +- +- +- +- 0 +- 1 +- 1 +- 2 +- fill +- +- +- +- +- +- True +- 0 +- 0 +- 1 +- 0 +- 0 +- 0 +- 0 +- 0 +- +- +- +- True +- False +- 0 +- +- +- +- True +- True +- gtk-remove +- True +- GTK_RELIEF_NORMAL +- True +- +- +- 0 +- True +- True +- +- +- +- +- +- +- 1 +- 2 +- 1 +- 2 +- fill +- fill +- +- +- +- +- 0 +- True +- True +- +- +- +- +- 0 +- True +- True +- +- +- +- +- False +- True +- +- +- +- +- +- True +- Ignored Hosts +- False +- False +- GTK_JUSTIFY_LEFT +- False +- False +- 0.5 +- 0.5 +- 0 +- 0 +- PANGO_ELLIPSIZE_NONE +- -1 +- False +- 0 +- +- +- tab +- +- +- +- +- 0 +- True +- True +- +- +- +- +- +- +- +- 5 +- HTTP Proxy Details +- GTK_WINDOW_TOPLEVEL +- GTK_WIN_POS_NONE +- False +- False +- False +- True +- False +- False +- GDK_WINDOW_TYPE_HINT_DIALOG +- GDK_GRAVITY_NORTH_WEST +- True +- False +- False +- +- +- +- True +- False +- 2 +- +- +- +- True +- GTK_BUTTONBOX_END +- +- +- +- True +- True +- True +- gtk-help +- True +- GTK_RELIEF_NORMAL +- True +- -11 +- +- +- +- +- +- True +- True +- True +- gtk-close +- True +- GTK_RELIEF_NORMAL +- True +- -7 +- +- +- +- +- 0 +- False +- True +- GTK_PACK_END +- +- +- +- +- +- 5 +- True +- False +- 6 +- +- +- +- True +- True +- <b>_Use authentication</b> +- True +- GTK_RELIEF_NORMAL +- True +- False +- False +- True +- +- +- 0 +- False +- False +- +- +- +- +- +- True +- False +- 0 +- +- +- +- True +- +- False +- False +- GTK_JUSTIFY_LEFT +- False +- False +- 0.5 +- 0.5 +- 0 +- 0 +- PANGO_ELLIPSIZE_NONE +- -1 +- False +- 0 +- +- +- 0 +- False +- False +- +- +- +- +- +- True +- False +- 2 +- 2 +- False +- 6 +- 12 +- +- +- +- True +- U_sername: +- True +- False +- GTK_JUSTIFY_LEFT +- False +- False +- 0 +- 0.5 +- 0 +- 0 +- username_entry +- PANGO_ELLIPSIZE_NONE +- -1 +- False +- 0 +- +- +- 0 +- 1 +- 0 +- 1 +- fill +- +- +- +- +- +- +- True +- _Password: +- True +- False +- GTK_JUSTIFY_LEFT +- False +- False +- 0 +- 0.5 +- 0 +- 0 +- password_entry +- PANGO_ELLIPSIZE_NONE +- -1 +- False +- 0 +- +- +- 0 +- 1 +- 1 +- 2 +- fill +- +- +- +- +- +- +- True +- True +- True +- False +- 0 +- +- True +- False +- +- +- 1 +- 2 +- 1 +- 2 +- +- +- +- +- +- +- True +- True +- True +- True +- 0 +- +- True +- False +- +- +- 1 +- 2 +- 0 +- 1 +- +- +- +- +- +- 0 +- True +- True +- +- +- +- +- 0 +- True +- True +- +- +- +- +- 0 +- True +- True +- +- +- +- +- +- ++ ++ 5 ++ Network Proxy Preferences ++ False ++ GDK_WINDOW_TYPE_HINT_DIALOG ++ False ++ ++ ++ True ++ 2 ++ ++ ++ True ++ True ++ 5 ++ ++ ++ True ++ 12 ++ 18 ++ ++ ++ True ++ True ++ <b>Di_rect internet connection</b> ++ True ++ 0 ++ True ++ ++ ++ False ++ False ++ ++ ++ ++ ++ True ++ 18 ++ ++ ++ True ++ 6 ++ ++ ++ True ++ True ++ <b>_Manual proxy configuration</b> ++ True ++ 0 ++ True ++ none_radiobutton ++ ++ ++ False ++ False ++ ++ ++ ++ ++ True ++ False ++ True ++ _Use the same proxy for all protocols ++ True ++ 0 ++ True ++ ++ ++ False ++ False ++ 1 ++ ++ ++ ++ ++ True ++ False ++ ++ ++ True ++ ++ ++ ++ False ++ False ++ ++ ++ ++ ++ True ++ 4 ++ 5 ++ 12 ++ 6 ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ True ++ 0 ++ H_TTP proxy: ++ True ++ http_host_entry ++ ++ ++ GTK_FILL ++ ++ ++ ++ ++ ++ True ++ 0 ++ _Secure HTTP proxy: ++ True ++ secure_host_entry ++ ++ ++ 1 ++ 2 ++ GTK_FILL ++ ++ ++ ++ ++ ++ True ++ 0 ++ _FTP proxy: ++ True ++ ftp_host_entry ++ ++ ++ 2 ++ 3 ++ GTK_FILL ++ ++ ++ ++ ++ ++ True ++ 0 ++ S_ocks host: ++ True ++ socks_host_entry ++ ++ ++ 3 ++ 4 ++ GTK_FILL ++ ++ ++ ++ ++ ++ True ++ True ++ ++ ++ 1 ++ 2 ++ ++ ++ ++ ++ ++ True ++ True ++ ++ ++ 1 ++ 2 ++ 1 ++ 2 ++ ++ ++ ++ ++ ++ True ++ True ++ ++ ++ 1 ++ 2 ++ 2 ++ 3 ++ ++ ++ ++ ++ ++ True ++ True ++ ++ ++ 1 ++ 2 ++ 3 ++ 4 ++ ++ ++ ++ ++ ++ True ++ 0 ++ Port: ++ ++ ++ ++ ++ ++ 2 ++ 3 ++ GTK_FILL ++ ++ ++ ++ ++ ++ True ++ 0 ++ Port: ++ ++ ++ ++ ++ ++ 2 ++ 3 ++ 1 ++ 2 ++ GTK_FILL ++ ++ ++ ++ ++ ++ True ++ 0 ++ Port: ++ ++ ++ ++ ++ ++ 2 ++ 3 ++ 2 ++ 3 ++ GTK_FILL ++ ++ ++ ++ ++ ++ True ++ 0 ++ Port: ++ ++ ++ ++ ++ ++ 2 ++ 3 ++ 3 ++ 4 ++ GTK_FILL ++ ++ ++ ++ ++ ++ True ++ True ++ 0 0 65535 1 10 0 ++ 1 ++ ++ ++ ++ ++ ++ 3 ++ 4 ++ ++ ++ ++ ++ ++ True ++ True ++ 0 0 65535 1 10 0 ++ 1 ++ ++ ++ ++ ++ ++ 3 ++ 4 ++ 1 ++ 2 ++ ++ ++ ++ ++ ++ True ++ True ++ 0 0 65535 1 10 0 ++ 1 ++ ++ ++ ++ ++ ++ 3 ++ 4 ++ 2 ++ 3 ++ ++ ++ ++ ++ ++ True ++ True ++ 0 0 65535 1 10 0 ++ 1 ++ ++ ++ ++ ++ ++ 3 ++ 4 ++ 3 ++ 4 ++ ++ ++ ++ ++ ++ True ++ True ++ _Authentication ++ True ++ 0 ++ ++ ++ 4 ++ 5 ++ GTK_FILL ++ ++ ++ ++ ++ ++ 1 ++ ++ ++ ++ ++ 2 ++ ++ ++ ++ ++ ++ ++ True ++ 6 ++ ++ ++ True ++ True ++ <b>_Automatic proxy configuration</b> ++ True ++ 0 ++ True ++ none_radiobutton ++ ++ ++ False ++ False ++ ++ ++ ++ ++ True ++ ++ ++ True ++ ++ ++ ++ False ++ False ++ ++ ++ ++ ++ True ++ False ++ 12 ++ ++ ++ True ++ Autoconfiguration _URL: ++ True ++ autoconfig_entry ++ ++ ++ False ++ False ++ ++ ++ ++ ++ True ++ True ++ ++ ++ 1 ++ ++ ++ ++ ++ 1 ++ ++ ++ ++ ++ 1 ++ ++ ++ ++ ++ False ++ False ++ 1 ++ ++ ++ ++ ++ 1 ++ ++ ++ ++ ++ True ++ 6 ++ GTK_BUTTONBOX_START ++ ++ ++ True ++ True ++ True ++ Appy System-Wide... ++ 0 ++ ++ ++ False ++ False ++ ++ ++ ++ ++ True ++ True ++ True ++ Reset ++ 0 ++ ++ ++ False ++ False ++ 1 ++ ++ ++ ++ ++ 2 ++ ++ ++ ++ ++ ++ ++ True ++ Proxy Configuration ++ ++ ++ tab ++ False ++ ++ ++ ++ ++ True ++ 12 ++ 6 ++ ++ ++ True ++ 0 ++ <b>Ignore Host List</b> ++ ++ ++ False ++ False ++ ++ ++ ++ ++ True ++ ++ ++ True ++ ++ ++ ++ False ++ False ++ ++ ++ ++ ++ True ++ 2 ++ 2 ++ 12 ++ 6 ++ ++ ++ True ++ True ++ ++ ++ ++ ++ ++ ++ ++ True ++ True ++ gtk-add ++ True ++ 0 ++ ++ ++ 1 ++ 2 ++ GTK_FILL ++ ++ ++ ++ ++ ++ True ++ True ++ GTK_POLICY_AUTOMATIC ++ GTK_POLICY_AUTOMATIC ++ GTK_SHADOW_IN ++ ++ ++ True ++ True ++ False ++ ++ ++ ++ ++ 1 ++ 2 ++ GTK_FILL ++ ++ ++ ++ ++ True ++ 0 ++ 0 ++ 0 ++ ++ ++ True ++ ++ ++ True ++ True ++ gtk-remove ++ True ++ 0 ++ ++ ++ ++ ++ ++ ++ 1 ++ 2 ++ 1 ++ 2 ++ GTK_FILL ++ GTK_FILL ++ ++ ++ ++ ++ 1 ++ ++ ++ ++ ++ 1 ++ ++ ++ ++ ++ 1 ++ ++ ++ ++ ++ True ++ Ignored Hosts ++ ++ ++ tab ++ 1 ++ False ++ ++ ++ ++ ++ 1 ++ ++ ++ ++ ++ True ++ GTK_BUTTONBOX_END ++ ++ ++ True ++ True ++ True ++ gtk-help ++ True ++ -11 ++ ++ ++ ++ ++ True ++ True ++ True ++ gtk-close ++ True ++ -7 ++ ++ ++ 1 ++ ++ ++ ++ ++ False ++ GTK_PACK_END ++ ++ ++ ++ ++ ++ ++ 5 ++ HTTP Proxy Details ++ False ++ GDK_WINDOW_TYPE_HINT_DIALOG ++ False ++ ++ ++ True ++ 2 ++ ++ ++ True ++ 5 ++ 6 ++ ++ ++ True ++ True ++ <b>_Use authentication</b> ++ True ++ 0 ++ True ++ ++ ++ False ++ False ++ ++ ++ ++ ++ True ++ ++ ++ True ++ ++ ++ ++ False ++ False ++ ++ ++ ++ ++ True ++ False ++ 2 ++ 2 ++ 12 ++ 6 ++ ++ ++ True ++ 0 ++ U_sername: ++ True ++ username_entry ++ ++ ++ GTK_FILL ++ ++ ++ ++ ++ ++ True ++ 0 ++ _Password: ++ True ++ password_entry ++ ++ ++ 1 ++ 2 ++ GTK_FILL ++ ++ ++ ++ ++ ++ True ++ True ++ False ++ ++ ++ 1 ++ 2 ++ 1 ++ 2 ++ ++ ++ ++ ++ ++ True ++ True ++ ++ ++ 1 ++ 2 ++ ++ ++ ++ ++ ++ 1 ++ ++ ++ ++ ++ 1 ++ ++ ++ ++ ++ 1 ++ ++ ++ ++ ++ True ++ GTK_BUTTONBOX_END ++ ++ ++ True ++ True ++ True ++ gtk-help ++ True ++ -11 ++ ++ ++ ++ ++ True ++ True ++ True ++ gtk-close ++ True ++ -7 ++ ++ ++ 1 ++ ++ ++ ++ ++ False ++ GTK_PACK_END ++ ++ ++ ++ ++ + --- gnome-control-center-2.24.0.1.orig/debian/patches/106_screen-res-extra-support.patch +++ gnome-control-center-2.24.0.1/debian/patches/106_screen-res-extra-support.patch @@ -0,0 +1,52 @@ +diff -Nur -x '*.orig' -x '*~' ubuntu/capplets/display/xrandr-capplet.c ubuntu.new/capplets/display/xrandr-capplet.c +--- ubuntu/capplets/display/xrandr-capplet.c 2008-09-09 12:22:42.000000000 +0200 ++++ ubuntu.new/capplets/display/xrandr-capplet.c 2008-09-09 12:23:48.000000000 +0200 +@@ -1655,10 +1655,47 @@ + if (!(min_width <= req_width && req_width <= max_width + && min_height <= req_height && req_height <= max_height)) + { +- /* FIXME: present a useful dialog, maybe even before the user tries to Apply */ + #if 0 + g_debug ("Your X server needs a larger Virtual size!"); + #endif ++ char *filename = "/usr/share/screen-resolution-extra/policyui.py"; ++ ++ if ((g_file_test(filename, G_FILE_TEST_EXISTS))) ++ { ++ /* make use of the Python program to calculate the required size ++ * of the framebuffer and to compare it with the current size. ++ * If the current size is not enough, the Python program will ++ * show a GTK dialog so that users can apply the virtual ++ * resolution (through PolicyKit). ++ * ++ * The Python program uses XKit as a xorg.conf parser, validator ++ * and writer. If no xorg.conf can be found or is usable, a new ++ * one will be created. ++ */ ++ gboolean rc; ++ int i, status; ++ gchar *command = g_strconcat ("python ", filename, NULL); ++ ++ for (i = 0; app->current_configuration->outputs[i] != NULL; ++i) ++ { ++ GnomeOutputInfo *o = app->current_configuration->outputs[i]; ++ gchar *ostr = g_strdup_printf (" %d,%d:%dx%d", o->x, o->y, o->width, o->height); ++ gchar *buf = g_strconcat (command, ostr, NULL); ++ g_free(command); ++ g_free(ostr); ++ command = buf; ++ } ++ rc = (g_spawn_command_line_sync (command, NULL, NULL, &status, NULL) && status == 0); ++ g_free (command); ++ ++ if (! rc) ++ g_print("Error: Failure running %s\n", filename); ++ } ++ else ++ { ++ g_print ("Error: Cannot setup multi-screen configuration with the current Virtual settings\n"); ++ return; ++ } + } + } + --- gnome-control-center-2.24.0.1.orig/debian/patches/71_at_properties_gksudo_gdmsetup.patch +++ gnome-control-center-2.24.0.1/debian/patches/71_at_properties_gksudo_gdmsetup.patch @@ -0,0 +1,12 @@ +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.23.3/capplets/accessibility/at-properties/main.c gnome-control-center-2.23.3.new/capplets/accessibility/at-properties/main.c +--- gnome-control-center-2.23.3/capplets/accessibility/at-properties/main.c 2008-06-09 18:23:26.000000000 +0200 ++++ gnome-control-center-2.23.3.new/capplets/accessibility/at-properties/main.c 2008-06-09 18:23:55.000000000 +0200 +@@ -78,7 +78,7 @@ + static void + cb_login_preferences (GtkDialog *dialog, gint response_id) + { +- g_spawn_command_line_async ("gdmsetup", NULL); ++ g_spawn_command_line_async ("gksu gdmsetup", NULL); + } + + static void --- gnome-control-center-2.24.0.1.orig/debian/patches/28_fixup_touchpad_config.patch +++ gnome-control-center-2.24.0.1/debian/patches/28_fixup_touchpad_config.patch @@ -0,0 +1,39 @@ +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.23.90/capplets/mouse/gnome-mouse-properties.c gnome-control-center-2.23.90.new/capplets/mouse/gnome-mouse-properties.c +--- gnome-control-center-2.23.90/capplets/mouse/gnome-mouse-properties.c 2008-08-31 07:43:56.000000000 +0100 ++++ gnome-control-center-2.23.90.new/capplets/mouse/gnome-mouse-properties.c 2008-08-31 07:44:17.000000000 +0100 +@@ -41,7 +41,9 @@ + #include + #include + #include ++#include + #include ++#include + + #ifdef HAVE_XCURSOR + #include +@@ -319,9 +321,23 @@ + int numdevices, i; + gboolean ret = FALSE; + XDeviceInfo *devicelist = XListInputDevices (GDK_DISPLAY(), &numdevices); ++ XIPropertyInfo *propinfo; ++ Atom prop = XInternAtom(GDK_DISPLAY(), "Synaptics Off", False); ++ + for (i = 0; i < numdevices; i++) { +- if (strcmp (devicelist[i].name, "Synaptics Touchpad") == 0) +- ret = TRUE; ++ gdk_error_trap_push(); ++ XDevice *device = XOpenDevice (GDK_DISPLAY(), ++ devicelist[i].id); ++ if (gdk_error_trap_pop()) ++ continue; ++ ++ gdk_error_trap_push(); ++ propinfo = XQueryDeviceProperty(GDK_DISPLAY(), device, prop); ++ XCloseDevice (GDK_DISPLAY(), device); ++ if (gdk_error_trap_pop() || (propinfo == NULL)) ++ continue; ++ XFree(propinfo); ++ ret = TRUE; + } + + XFreeDeviceList(devicelist); --- gnome-control-center-2.24.0.1.orig/debian/patches/100_at_properties_readd_gksudo_disable_grab_toggle.patch +++ gnome-control-center-2.24.0.1/debian/patches/100_at_properties_readd_gksudo_disable_grab_toggle.patch @@ -0,0 +1,752 @@ +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.23.3/capplets/accessibility/at-properties/at-enable-dialog.glade gnome-control-center-2.23.3.new/capplets/accessibility/at-properties/at-enable-dialog.glade +--- gnome-control-center-2.23.3/capplets/accessibility/at-properties/at-enable-dialog.glade 2008-06-09 18:17:32.000000000 +0200 ++++ gnome-control-center-2.23.3.new/capplets/accessibility/at-properties/at-enable-dialog.glade 2008-06-09 18:18:04.000000000 +0200 +@@ -1,313 +1,184 @@ +- +- +- ++ ++ ++ + +- +- 5 +- Assistive Technologies Preferences +- GTK_WINDOW_TOPLEVEL +- GTK_WIN_POS_NONE +- False +- False +- False +- True +- False +- False +- GDK_WINDOW_TYPE_HINT_DIALOG +- GDK_GRAVITY_NORTH_WEST +- True +- False +- False +- +- +- +- True +- False +- 2 +- +- +- +- True +- GTK_BUTTONBOX_END +- +- +- +- True +- True +- True +- gtk-help +- True +- GTK_RELIEF_NORMAL +- True +- -11 +- +- +- +- +- +- True +- False +- True +- True +- GTK_RELIEF_NORMAL +- True +- 0 +- Close and _Log Out +- True +- +- +- +- +- +- True +- True +- True +- True +- gtk-close +- True +- GTK_RELIEF_NORMAL +- True +- -7 +- +- +- +- +- 0 +- False +- True +- GTK_PACK_END +- +- +- +- +- +- 5 +- True +- False +- 18 +- +- +- +- True +- False +- 0 +- +- +- +- True +- False +- 6 +- +- +- +- True +- <b>Assistive Technologies</b> +- False +- True +- GTK_JUSTIFY_LEFT +- False +- False +- 0 +- 0.5 +- 0 +- 0 +- PANGO_ELLIPSIZE_NONE +- -1 +- False +- 0 +- +- +- 0 +- False +- False +- +- +- +- +- +- True +- False +- 12 +- +- +- +- True +- 0.5 +- 0 +- 0 +- 0 +- +- +- 0 +- False +- False +- +- +- +- +- +- True +- False +- 6 +- +- +- +- True +- True +- GTK_RELIEF_NORMAL +- True +- _Preferred Applications +- True +- +- Jump to Preferred Applications dialog +- +- +- +- 0 +- False +- False +- +- +- +- +- +- True +- True +- _Enable assistive technologies +- True +- GTK_RELIEF_NORMAL +- True +- False +- False +- True +- +- Changes to enable assistive technologies will not take effect until your next log in. +- +- +- +- 0 +- False +- False +- +- +- +- +- 0 +- True +- True +- +- +- +- +- 0 +- True +- True +- +- +- +- +- 0 +- True +- True +- +- +- +- +- 0 +- True +- True +- +- +- +- +- +- True +- False +- 0 +- +- +- +- True +- False +- 6 +- +- +- +- True +- <b>Preferences</b> +- False +- True +- GTK_JUSTIFY_LEFT +- False +- False +- 0 +- 0.5 +- 0 +- 0 +- PANGO_ELLIPSIZE_NONE +- -1 +- False +- 0 +- +- +- 0 +- False +- False +- +- +- +- +- +- True +- False +- 12 +- +- +- +- True +- 0.5 +- 0 +- 0 +- 0 +- +- +- 0 +- False +- False +- +- +- +- +- +- True +- False +- 6 +- +- +- +- True +- False +- 0 +- +- +- +- True +- True +- GTK_RELIEF_NORMAL +- True +- _Keyboard Accessibility +- True +- +- Jump to the Keyboard Accessibility dialog +- +- +- +- 5 +- False +- False +- +- +- ++ ++ 5 ++ Assistive Technologies Preferences ++ False ++ GDK_WINDOW_TYPE_HINT_DIALOG ++ False ++ ++ ++ True ++ 2 ++ ++ ++ True ++ 5 ++ 18 ++ ++ ++ True ++ ++ ++ True ++ 6 ++ ++ ++ True ++ 0 ++ <b>Assistive Technologies</b> ++ True ++ ++ ++ False ++ False ++ ++ ++ ++ ++ True ++ 12 ++ ++ ++ True ++ 0 ++ gtk-missing-image ++ ++ ++ False ++ False ++ ++ ++ ++ ++ True ++ 6 ++ ++ ++ True ++ True ++ _Preferred Applications ++ True ++ 0 ++ ++ Jump to Preferred Applications dialog ++ ++ ++ ++ False ++ False ++ ++ ++ ++ ++ True ++ True ++ _Enable assistive technologies ++ True ++ 0 ++ True ++ ++ Changes to enable assistive technologies will not take effect ntil your next log in. ++ ++ ++ ++ False ++ False ++ 1 ++ ++ ++ ++ ++ True ++ True ++ _Password dialogs as normal windows ++ True ++ 0 ++ True ++ ++ Changes to enable assistive technologies will not take effect ntil your next log in. ++ ++ ++ ++ False ++ False ++ 2 ++ ++ ++ ++ ++ 1 ++ ++ ++ ++ ++ 1 ++ ++ ++ ++ ++ ++ ++ ++ ++ True ++ ++ ++ True ++ 6 ++ ++ ++ True ++ 0 ++ <b>Preferences</b> ++ True ++ ++ ++ False ++ False ++ ++ ++ ++ ++ True ++ 12 ++ ++ ++ True ++ 0 ++ gtk-missing-image ++ ++ ++ False ++ False ++ ++ ++ ++ ++ True ++ 6 ++ ++ ++ True ++ ++ ++ True ++ True ++ _Keyboard Accessibility ++ True ++ 0 ++ ++ Jump to the Keyboard Accessibility dialog ++ ++ ++ ++ False ++ False ++ 5 ++ ++ + + + True +@@ -326,69 +197,106 @@ + False + + +- +- +- +- True +- True +- GTK_RELIEF_NORMAL +- True +- Accessible Lo_gin +- True +- +- Jump to the Accessible Login dialog +- +- +- +- 5 +- False +- False +- +- +- +- +- 0 +- False +- False +- +- +- +- +- 0 +- True +- True +- +- +- +- +- 0 +- True +- True +- +- +- +- +- 0 +- False +- False +- +- +- +- +- 0 +- True +- True +- +- +- +- +- 0 +- False +- False +- +- +- +- +- +- ++ ++ ++ True ++ True ++ Accessible Lo_gin ++ True ++ 0 ++ ++ Jump to the Accessible Login dialog ++ ++ ++ ++ False ++ False ++ 1 ++ ++ ++ ++ ++ False ++ False ++ ++ ++ ++ ++ 1 ++ ++ ++ ++ ++ 1 ++ ++ ++ ++ ++ False ++ False ++ ++ ++ ++ ++ 1 ++ ++ ++ ++ ++ False ++ False ++ 1 ++ ++ ++ ++ ++ True ++ GTK_BUTTONBOX_END ++ ++ ++ True ++ True ++ True ++ gtk-help ++ True ++ -11 ++ ++ ++ ++ ++ True ++ False ++ True ++ True ++ Close and _Log Out ++ True ++ 0 ++ ++ ++ 1 ++ ++ ++ ++ ++ True ++ True ++ True ++ True ++ gtk-close ++ True ++ -7 ++ ++ ++ 2 ++ ++ ++ ++ ++ False ++ GTK_PACK_END ++ ++ ++ ++ ++ + +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.23.3/capplets/accessibility/at-properties/main.c gnome-control-center-2.23.3.new/capplets/accessibility/at-properties/main.c +--- gnome-control-center-2.23.3/capplets/accessibility/at-properties/main.c 2008-06-09 18:17:32.000000000 +0200 ++++ gnome-control-center-2.23.3.new/capplets/accessibility/at-properties/main.c 2008-06-09 18:17:38.000000000 +0200 +@@ -9,6 +9,9 @@ + + #define ACCESSIBILITY_KEY "/desktop/gnome/interface/accessibility" + #define ACCESSIBILITY_KEY_DIR "/desktop/gnome/interface" ++#define GKSU_NO_GRAB_KEY "/apps/gksu/disable-grab" ++#define GKSU_NO_GRAB_KEY_DIR "/apps/gksu" ++ + + static gboolean initial_state; + +@@ -143,6 +146,42 @@ + } + + static void ++at_gksudo_update (GConfClient *client, ++ GladeXML *dialog) ++{ ++ gboolean is_enabled = gconf_client_get_bool (client, GKSU_NO_GRAB_KEY, NULL); ++ ++ gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (WID ("at_gksudo_toggle")), ++ is_enabled); ++ ++} ++ ++ ++static void ++at_gksudo_changed (GConfClient *client, ++ guint cnxn_id, ++ GConfEntry *entry, ++ gpointer user_data) ++{ ++ at_gksudo_update (client, user_data); ++} ++ ++ ++static void ++at_gksudo_toggled (GtkToggleButton *toggle_button, ++ GladeXML *dialog) ++{ ++ GConfClient *client = gconf_client_get_default (); ++ gboolean is_enabled = gtk_toggle_button_get_active (toggle_button); ++ ++ gconf_client_set_bool (client, GKSU_NO_GRAB_KEY, ++ is_enabled, ++ NULL); ++ g_object_unref (client); ++} ++ ++ ++static void + setup_dialog (GladeXML *dialog) + { + GConfClient *client; +@@ -150,6 +189,26 @@ + GObject *peditor; + + client = gconf_client_get_default (); ++ ++ //Password grab toggle ++ gconf_client_add_dir (client, GKSU_NO_GRAB_KEY_DIR, ++ GCONF_CLIENT_PRELOAD_ONELEVEL, NULL); ++ ++ widget = WID ("at_gksudo_toggle"); ++ ++ g_signal_connect (widget, "toggled", ++ G_CALLBACK (at_gksudo_toggled), ++ dialog); ++ ++ peditor = gconf_peditor_new_boolean (NULL, GKSU_NO_GRAB_KEY, ++ widget, ++ NULL); ++ ++ at_gksudo_update (client, dialog); ++ ++ gconf_client_notify_add (client, GKSU_NO_GRAB_KEY_DIR, ++ at_gksudo_changed, ++ dialog, NULL, NULL); + + gconf_client_add_dir (client, ACCESSIBILITY_KEY_DIR, + GCONF_CLIENT_PRELOAD_ONELEVEL, NULL); --- gnome-control-center-2.24.0.1.orig/debian/patches/51_ubuntu_system_keyboard.patch +++ gnome-control-center-2.24.0.1/debian/patches/51_ubuntu_system_keyboard.patch @@ -0,0 +1,495 @@ +diff -Nur -x '*.orig' -x '*~' ubuntu/capplets/keyboard/gnome-keyboard-properties.glade ubuntu.new/capplets/keyboard/gnome-keyboard-properties.glade +--- ubuntu/capplets/keyboard/gnome-keyboard-properties.glade 2008-09-10 11:52:58.000000000 +0200 ++++ ubuntu.new/capplets/keyboard/gnome-keyboard-properties.glade 2008-09-10 13:54:21.000000000 +0200 +@@ -366,7 +366,7 @@ + + + +- ++ + True + General + GTK_JUSTIFY_CENTER +@@ -462,96 +462,218 @@ + + + +- ++ + True +- True +- Separate _layout for each window +- True +- 0 +- True +- +- +- False +- False +- 1 +- +- +- +- +- True +- GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK +- 6 ++ 12 ++ True + +- ++ + True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK + 6 +- GTK_BUTTONBOX_START + +- ++ + True + True +- gtk-remove +- True + 0 ++ ++ ++ True ++ gtk-add ++ ++ + + + False + False +- 1 + + + +- ++ + True + True +- gtk-print +- True + 0 ++ ++ ++ True ++ gtk-remove ++ ++ + + + False + False ++ 1 ++ ++ ++ ++ ++ True ++ GTK_BUTTONBOX_END ++ ++ ++ True ++ True ++ 0 ++ ++ ++ True ++ 12 ++ 12 ++ ++ ++ True ++ 6 ++ ++ ++ True ++ gtk-print ++ ++ ++ ++ ++ True ++ _Print Layout Diagram... ++ True ++ ++ ++ 1 ++ ++ ++ ++ ++ ++ ++ ++ ++ False ++ False ++ GTK_PACK_END ++ ++ ++ ++ + 2 + + ++ ++ ++ False ++ False ++ ++ ++ ++ ++ True ++ 6 + +- ++ + True + True +- _Add... ++ Separate _layout for each window + True + 0 ++ True ++ ++ ++ False ++ False ++ ++ ++ ++ ++ True ++ True ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ 0 ++ ++ ++ True ++ ++ ++ True ++ 8 ++ 8 ++ ++ ++ 24 ++ True ++ Other Options... ++ ++ ++ ++ ++ ++ + + + False + False +- 3 ++ GTK_PACK_END ++ 1 + + + + + False ++ 1 + + + +- ++ + True +- True +- Reset to De_faults +- True +- 0 ++ 12 ++ ++ ++ True ++ 6 ++ GTK_BUTTONBOX_START ++ ++ ++ True ++ True ++ True ++ 0 ++ ++ ++ True ++ 4 ++ 4 ++ ++ ++ True ++ Apply System-Wide... ++ ++ ++ ++ ++ ++ ++ ++ ++ True ++ True ++ _Reset ++ True ++ 0 ++ ++ ++ 1 ++ ++ ++ ++ + + + False +- False +- GTK_PACK_END +- 4 ++ 2 + + + + + False +- 2 ++ 1 + + + +@@ -559,28 +681,6 @@ + 1 + + +- +- +- True +- GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK +- GTK_BUTTONBOX_END +- +- +- True +- True +- True +- GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK +- Layout _Options... +- True +- 0 +- +- +- +- +- False +- 2 +- +- + + + 1 +@@ -1898,7 +1998,7 @@ + True + 6 + +- ++ + True + 0 + Preview: +@@ -1968,7 +2068,7 @@ + + + +- ++ + True + True + True +diff -Nur -x '*.orig' -x '*~' ubuntu/capplets/keyboard/gnome-keyboard-properties-xkb.c ubuntu.new/capplets/keyboard/gnome-keyboard-properties-xkb.c +--- ubuntu/capplets/keyboard/gnome-keyboard-properties-xkb.c 2008-09-10 11:52:58.000000000 +0200 ++++ ubuntu.new/capplets/keyboard/gnome-keyboard-properties-xkb.c 2008-09-10 11:53:02.000000000 +0200 +@@ -29,6 +29,7 @@ + #include + #include + #include ++#include + + #include "capplet-util.h" + #include "gconf-property-editor.h" +@@ -122,6 +123,154 @@ + xkb_gconf_client = NULL; + } + ++// mvo: make default entry the system wide default ++static void ++make_default (GtkWidget * button, GladeXML * dialog) ++{ ++ GkbdKeyboardConfig kbd; ++ GError *error = NULL; ++ gboolean dbus_ret, res; ++ DBusGConnection *systembus, *sessionbus; ++ DBusGProxy *dbus_proxy; ++ int default_group; ++ gchar model[128] = {0,}; ++ gchar layout[128] = {0,}; ++ gchar variant[128] = {0,}; ++ gchar options[256] = {0,}; ++ ++ // get current settings ++ gkbd_keyboard_config_init (&kbd, xkb_gconf_client, engine); ++ gkbd_keyboard_config_load_from_gconf (&kbd, &initial_config); ++ default_group = gconf_client_get_int(xkb_gconf_client, ++ "/desktop/gnome/peripherals/keyboard/general/defaultGroup", ++ NULL); ++ ++ // convert so that its apprioriate for the dbus backend ++ strncpy(model, kbd.model, sizeof(model)); ++ ++ // get default_group ++ gchar *ndata = (gchar*)g_list_nth_data((GSList*)kbd.layouts_variants, default_group); ++ // something is wrong with the gconf settings, ignore ++ if(ndata == NULL) { ++ g_printerr("gconf default keyboard group out of range\n"); ++ return; ++ } ++ gchar** layout_variant = g_strsplit(ndata, "\t", -1); ++ strncpy(layout, layout_variant[0], sizeof(layout)); ++ if(g_strv_length(layout_variant) > 1) ++ strncpy(variant, layout_variant[1], sizeof(variant)); ++ g_strfreev(layout_variant); ++ ++ // build options string ++ GString *options_str = g_string_new(""); ++ GSList *l = kbd.options; ++ if (l->data) { ++ gchar** options_v = g_strsplit(l->data,"\t",-1); ++ options_str = g_string_append(options_str, options_v[1]); ++ g_strfreev(options_v); ++ } ++ while(l = g_list_next(l)) { ++ options_str = g_string_append(options_str, ","); ++ gchar** options_v = g_strsplit(l->data,"\t",-1); ++ options_str = g_string_append(options_str, options_v[1]); ++ g_strfreev(options_v); ++ } ++ strncpy(options, options_str->str, sizeof(options)); ++ g_string_free(options_str, TRUE); ++ gkbd_keyboard_config_term (&kbd); ++ ++ // the console does not deal very well with evdev, we let ++ // the auto detection handle this for now ++ if (strcmp(model,"evdev") == 0) ++ strcpy(model,""); ++ ++#if 0 ++ printf("model: %s\n", model); ++ printf("layout: '%s'\n", layout); ++ printf("variant: '%s'\n", variant); ++ printf("options: '%s'\n", options); ++#endif ++ ++ // now do the dbus stuff ++ sessionbus = dbus_g_bus_get (DBUS_BUS_SESSION, &error); ++ if (sessionbus == NULL) { ++ g_printerr ("Failed to open connection to bus: %s\n", ++ error->message); ++ g_error_free (error); ++ return; ++ } ++ ++ dbus_proxy = dbus_g_proxy_new_for_name (sessionbus, ++ "org.freedesktop.PolicyKit.AuthenticationAgent", ++ "/", ++ "org.freedesktop.PolicyKit.AuthenticationAgent"); ++ if (dbus_proxy == NULL) { ++ g_printerr ("Failed to get proxy: %s\n", ++ error->message); ++ g_error_free (error); ++ return; ++ } ++ ++ if (!dbus_g_proxy_call (dbus_proxy, "ObtainAuthorization", &error, ++ G_TYPE_STRING, "com.ubuntu.systemservice.setkeyboard", ++ G_TYPE_UINT, 0, ++ G_TYPE_UINT, getpid(), ++ G_TYPE_INVALID, ++ G_TYPE_BOOLEAN, &res, G_TYPE_INVALID)) ++ { ++ if (error->domain == DBUS_GERROR && ++ error->code == DBUS_GERROR_REMOTE_EXCEPTION) ++ g_printerr ("Caught remote method exception %s: %s", ++ dbus_g_error_get_name (error), ++ error->message); ++ else ++ g_printerr ("Error: %s\n", error->message); ++ g_error_free (error); ++ return; ++ } ++ g_object_unref (dbus_proxy); ++ g_print("ObtainAuth returned: %i\n", res); ++ // so we get a "0" here too if the auth is not required ?!? ++ // if(!res) ++ // return; ++ ++ systembus = dbus_g_bus_get (DBUS_BUS_SYSTEM, &error); ++ dbus_proxy = dbus_g_proxy_new_for_name (systembus, ++ "com.ubuntu.SystemService", ++ "/", ++ "com.ubuntu.SystemService"); ++ if (dbus_proxy == NULL) { ++ g_printerr ("Failed to get dbus proxy: %s\n", ++ error->message); ++ g_error_free (error); ++ return; ++ } ++ ++ dbus_ret = dbus_g_proxy_call (dbus_proxy, "set_keyboard", &error, ++ G_TYPE_STRING, model, ++ G_TYPE_STRING, layout, ++ G_TYPE_STRING, variant, ++ G_TYPE_STRING, options, ++ G_TYPE_INVALID, ++ G_TYPE_BOOLEAN, &res, ++ G_TYPE_INVALID); ++ if (!dbus_ret) { ++ if (error->domain == DBUS_GERROR && ++ error->code == DBUS_GERROR_REMOTE_EXCEPTION) ++ g_printerr ("Caught remote method exception %s: %s", ++ dbus_g_error_get_name (error), ++ error->message); ++ else ++ g_printerr ("Error: %s\n", error->message); ++ g_error_free (error); ++ return; ++ } ++ ++ ++ //printf("res: %i\n", res); ++ g_object_unref (dbus_proxy); ++} ++ + static void + reset_to_defaults (GtkWidget * button, GladeXML * dialog) + { +@@ -182,6 +331,11 @@ + "clicked", G_CALLBACK (reset_to_defaults), + dialog); + ++ // mvo: global keyboard setting ++ g_signal_connect (G_OBJECT (WID ("button_make_default")), ++ "clicked", G_CALLBACK (make_default), ++ dialog); ++ + g_signal_connect_swapped (G_OBJECT (WID ("xkb_layout_options")), + "clicked", + G_CALLBACK (xkb_options_popup_dialog), --- gnome-control-center-2.24.0.1.orig/debian/patches/95_desktop-effects-integration.patch +++ gnome-control-center-2.24.0.1/debian/patches/95_desktop-effects-integration.patch @@ -0,0 +1,1484 @@ +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.23.90/capplets/appearance/appearance-effects.c gnome-control-center-2.23.90.new/capplets/appearance/appearance-effects.c +--- gnome-control-center-2.23.90/capplets/appearance/appearance-effects.c 1970-01-01 01:00:00.000000000 +0100 ++++ gnome-control-center-2.23.90.new/capplets/appearance/appearance-effects.c 2008-09-12 16:15:09.000000000 +0200 +@@ -0,0 +1,1120 @@ ++/* ++ * Copyright (C) 2007 Canonical ++ * Written by Michael Vogt ++ * and Mirco Müller ++ * All Rights Reserved ++ * ++ * Based on desktop-effects.c: ++ * Desktop Effects. A preference panel for compiz. ++ * Copyright (C) 2006 Red Hat, Inc. ++ * Author: Soren Sandmann (sandmann@redhat.com) * ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "appearance.h" ++ ++#include "gconf-property-editor.h" ++ ++typedef enum { ++ COMPIZ, ++ METACITY ++} WindowManager; ++ ++#define WINDOW_MANAGER_KEY "/desktop/gnome/session/required_components/windowmanager" ++#define REVERT_COUNT 40 ++#define SECONDS_WE_WILL_WAIT_FOR_COMPIZ_TO_START 8 ++#define PLUGIN_LIST_KEY "/apps/compiz/general/allscreens/options/active_plugins" ++#define NUM_WORKSPACES "/apps/metacity/general/num_workspaces" ++ ++/* helper structure to pass pager data around */ ++typedef struct _TraversalChunk { ++ GConfClient *client; ++ GArray *numRowsArray; ++ gint rows; ++} TraversalChunk; ++ ++/* possible effects level */ ++enum { ++ NO_EFFECTS, ++ NORMAL_EFFECTS, ++ EXTRA_EFFECTS, ++ CUSTOM_EFFECTS ++}; ++ ++/* radio-button names in glade-file */ ++static const char *effect_choices[] = { ++ "no_effects_button", ++ "normal_effects_button", ++ "extra_effects_button", ++ "custom_effects_button" ++}; ++ ++/* plugin-set for extra-effects level */ ++static const gchar* extra_effects[] = { ++ "shift", ++ "wobbly", ++ NULL ++}; ++ ++static gboolean ++check_graphics_driver (void) ++{ ++ return system ("jockey-gtk --check-composite") == 0; ++} ++ ++static gboolean ++check_simple_ccsm (void) ++{ ++ return g_file_test ("/usr/bin/simple-ccsm", G_FILE_TEST_IS_EXECUTABLE); ++} ++ ++static void ++run_simple_ccsm (GtkButton *widget, ++ gpointer data) ++{ ++ g_spawn_command_line_async ("/usr/bin/simple-ccsm", NULL); ++} ++ ++static GSList * ++get_plugins (AppearanceData *app, ++ GError **err) ++{ ++ return gconf_client_get_list (app->client, ++ PLUGIN_LIST_KEY, ++ GCONF_VALUE_STRING, ++ err); ++} ++ ++static gboolean ++contains_string (GSList *plugins, ++ const gchar *needle) ++{ ++ GSList *slist; ++ ++ for (slist = plugins; slist != NULL; slist = slist->next) ++ { ++ const char *s = slist->data; ++ ++ if (s && strcmp (s, needle) == 0) ++ return TRUE; ++ } ++ ++ return FALSE; ++} ++ ++ ++static void ++show_info (const char *text) ++{ ++ GtkWidget *dialog; ++ ++ dialog = gtk_message_dialog_new (NULL, ++ GTK_DIALOG_MODAL, ++ GTK_MESSAGE_INFO, ++ GTK_BUTTONS_OK, ++ text); ++ ++ gtk_dialog_run (GTK_DIALOG (dialog)); ++ gtk_widget_destroy (dialog); ++} ++ ++static gchar* ++get_string_value (GConfClient* client, ++ const gchar* key) ++{ ++ gchar *value = NULL; ++ GError *error = NULL; ++ ++ g_assert (client != NULL); ++ g_assert (key != NULL); ++ ++ value = gconf_client_get_string (client, key, &error); ++ if (error) ++ return NULL; ++ ++ return value; ++} ++ ++static gint ++get_int_value (GConfClient* client, ++ const gchar* key) ++{ ++ gint value = 0; ++ GError* error = NULL; ++ ++ g_assert (client != NULL); ++ g_assert (key != NULL); ++ ++ value = gconf_client_get_int (client, key, &error); ++ if (error) ++ return 0; ++ ++ return value; ++} ++ ++static void ++check_for_wnck_entry (gpointer data, ++ gpointer user_data) ++{ ++ gchar *appletId = (gchar*) data; ++ TraversalChunk *chunk = (TraversalChunk*) user_data; ++ GString *propertyPath = NULL; ++ gchar *value = NULL; ++ gint rows = 0; ++ gint position = 0; ++ ++ /* get bonobo-id of applet */ ++ propertyPath = g_string_new ("/apps/panel/applets/"); ++ propertyPath = g_string_append (propertyPath, appletId); ++ propertyPath = g_string_append (propertyPath, "/bonobo_iid"); ++ value = get_string_value (chunk->client, propertyPath->str); ++ ++ /* just exit if no bonobo-id was found */ ++ if (!value) ++ { ++ g_string_free (propertyPath, TRUE); ++ return; ++ } ++ ++ /* test if it is actually a switcher */ ++ if (!g_ascii_strncasecmp (value, ++ "OAFIID:GNOME_WorkspaceSwitcherApplet", ++ 36)) ++ { ++ /* assemble new gconf-path for num_rows gconf-key */ ++ g_string_free (propertyPath, TRUE); ++ propertyPath = g_string_new ("/apps/panel/applets/"); ++ propertyPath = g_string_append (propertyPath, appletId); ++ propertyPath = g_string_append (propertyPath, "/position"); ++ ++ /* get the value of position */ ++ position = get_int_value (chunk->client, propertyPath->str); ++ ++ if (position > 1) ++ { ++ /* assemble new gconf-path for num_rows gconf-key */ ++ g_string_free (propertyPath, TRUE); ++ propertyPath = g_string_new ("/apps/panel/applets/"); ++ propertyPath = g_string_append (propertyPath, appletId); ++ propertyPath = g_string_append (propertyPath, ++ "/prefs/num_rows"); ++ ++ /* get the value of rows */ ++ rows = get_int_value (chunk->client, propertyPath->str); ++ ++ if (!chunk->numRowsArray) ++ chunk->numRowsArray = g_array_new (TRUE, ++ TRUE, ++ sizeof (gint)); ++ ++ g_array_append_val (chunk->numRowsArray, rows); ++ } ++ } ++ ++ g_string_free (propertyPath, TRUE); ++} ++ ++gboolean ++set_int_value (GConfClient *client, ++ const gchar *key, ++ gint value) ++{ ++ gboolean result = FALSE; ++ GError *error = NULL; ++ ++ g_assert (client != NULL); ++ g_assert (key != NULL); ++ ++ result = gconf_client_set_int (client, ++ key, ++ value, ++ &error); ++ ++ if (error) ++ return FALSE; ++ ++ return result; ++} ++ ++static void ++set_wnck_entry (gpointer data, ++ gpointer user_data) ++{ ++ gchar *appletId = (gchar*) data; ++ TraversalChunk *chunk = (TraversalChunk*) user_data; ++ GString *propertyPath = NULL; ++ gchar *value = NULL; ++ gint position = 0; ++ ++ /* get bonobo-id of applet */ ++ propertyPath = g_string_new ("/apps/panel/applets/"); ++ propertyPath = g_string_append (propertyPath, appletId); ++ propertyPath = g_string_append (propertyPath, "/bonobo_iid"); ++ value = get_string_value (chunk->client, propertyPath->str); ++ ++ /* just exit if no bonobo-id was found */ ++ if (!value) ++ { ++ g_string_free (propertyPath, TRUE); ++ return; ++ } ++ ++ /* test if it is actually a switcher */ ++ if (!g_ascii_strncasecmp (value, ++ "OAFIID:GNOME_WorkspaceSwitcherApplet", ++ 36)) ++ { ++ /* assemble new gconf-path for applets position gconf-key */ ++ g_string_free (propertyPath, TRUE); ++ propertyPath = g_string_new ("/apps/panel/applets/"); ++ propertyPath = g_string_append (propertyPath, appletId); ++ propertyPath = g_string_append (propertyPath, "/position"); ++ ++ /* get the value of position */ ++ position = get_int_value (chunk->client, propertyPath->str); ++ ++ /* not the best way to test, if this applet is really active */ ++ if (position > 1) ++ { ++ /* assemble new gconf-path for num_rows gconf-key */ ++ g_string_free (propertyPath, TRUE); ++ propertyPath = g_string_new ("/apps/panel/applets/"); ++ propertyPath = g_string_append (propertyPath, appletId); ++ propertyPath = g_string_append (propertyPath, ++ "/prefs/num_rows"); ++ ++ /* set the value of rows */ ++ set_int_value (chunk->client, ++ propertyPath->str, ++ chunk->rows); ++ } ++ } ++ ++ /* cleanup */ ++ g_string_free (propertyPath, TRUE); ++} ++ ++static gint ++get_pager_num_rows (GConfClient *client) ++{ ++ GSList *idList = NULL; ++ TraversalChunk *chunk = NULL; ++ gint rows = 0; ++ ++ /* get ids of all used applets */ ++ idList = gconf_client_get_list (client, ++ "/apps/panel/general/applet_id_list", ++ GCONF_VALUE_STRING, ++ NULL); ++ ++ if (!idList) ++ return 1; ++ ++ /* create and initialize helper-structure */ ++ chunk = g_new0 (TraversalChunk, 1); ++ if (!chunk) ++ { ++ g_slist_free (idList); ++ return 1; ++ } ++ ++ chunk->client = client; ++ ++ /* search list of applets for wnck-applet */ ++ g_slist_foreach (idList, ++ check_for_wnck_entry, ++ (gpointer) chunk); ++ ++ if (chunk->numRowsArray == NULL) ++ rows = 1; ++ else ++ rows = g_array_index (chunk->numRowsArray, gint, 0); ++ ++ /* clean up */ ++ g_slist_free (idList); ++ g_array_free (chunk->numRowsArray, TRUE); ++ g_free (chunk); ++ ++ return rows; ++} ++ ++/* sets the number of rows of the first pager-applet found */ ++void static ++set_pager_num_rows (GConfClient *client, ++ gint rows) ++{ ++ GSList *idList = NULL; ++ TraversalChunk *chunk = NULL; ++ ++ /* get ids of all used applets */ ++ idList = gconf_client_get_list (client, ++ "/apps/panel/general/applet_id_list", ++ GCONF_VALUE_STRING, ++ NULL); ++ ++ /* if nothing is found at least return 1 to avoid a div. by 0 later */ ++ if (!idList) ++ return; ++ ++ /* create and initialize helper-structure */ ++ chunk = g_new0 (TraversalChunk, 1); ++ if (!chunk) ++ { ++ g_slist_free (idList); ++ return; ++ } ++ ++ chunk->client = client; ++ chunk->rows = rows; ++ ++ /* search list of applets for wnck-applet */ ++ g_slist_foreach (idList, ++ set_wnck_entry, ++ (gpointer) chunk); ++ ++ /* clean up */ ++ g_slist_free (idList); ++ g_array_free (chunk->numRowsArray, TRUE); ++ g_free (chunk); ++} ++ ++static void ++apply_settings (AppearanceData *app, ++ gboolean effects_enabled) ++{ ++ const char *str = effects_enabled? "compiz" : "metacity"; ++ char *session_file; ++ gint vsize; ++ gint hsize; ++ gint workspaces; ++ gint rows; ++ ++ gconf_client_set_string (app->client, ++ WINDOW_MANAGER_KEY, ++ str, ++ NULL); ++ ++ session_file = g_build_filename (g_get_home_dir (), ++ ".gnome2", ++ "session", ++ NULL); ++ ++ g_unlink (session_file); ++ g_free (session_file); ++ ++ /* here the whole logic for mapping any N:M workspace-layout from ++ * metacity to compiz or vice versa is handled, currently only ++ * implemented for one-screen setups */ ++ if (effects_enabled) ++ { ++ workspaces = get_int_value (app->client, ++ "/apps/metacity/general/num_workspaces"); ++ rows = get_pager_num_rows (app->client); ++ set_int_value (app->client, ++ "/apps/compiz/general/screen0/options/vsize", ++ rows); ++ set_int_value (app->client, ++ "/apps/compiz/general/screen0/options/hsize", ++ (gint) ceilf ((gfloat) workspaces / (gfloat) rows)); ++ set_pager_num_rows (app->client, 1); ++ } ++ else if (app->compiz_was_running) ++ { ++ vsize = get_int_value (app->client, ++ "/apps/compiz/general/screen0/options/vsize"); ++ hsize = get_int_value (app->client, ++ "/apps/compiz/general/screen0/options/hsize"); ++ set_int_value (app->client, ++ "/apps/metacity/general/num_workspaces", ++ vsize * hsize); ++ set_pager_num_rows (app->client, vsize); ++ } ++} ++ ++static void ++set_busy (GtkWidget *widget, ++ gboolean busy) ++{ ++ GdkCursor *cursor; ++ ++ if (busy) ++ cursor = gdk_cursor_new (GDK_WATCH); ++ else ++ cursor = NULL; ++ ++ gdk_window_set_cursor (widget->window, cursor); ++ ++ if (cursor) ++ gdk_cursor_unref (cursor); ++ ++ gdk_flush (); ++} ++ ++/* get_wm_window() and current_window_manager() are essentially cutted and ++ * pasted from gnome-wm.c from gnome-control-center. */ ++static Window ++get_wm_window (void) ++{ ++ Window *xwindow; ++ Atom type; ++ gint format; ++ gulong nitems; ++ gulong bytes_after; ++ Window result; ++ ++ XGetWindowProperty (GDK_DISPLAY (), ++ GDK_ROOT_WINDOW (), ++ XInternAtom (GDK_DISPLAY (), ++ "_NET_SUPPORTING_WM_CHECK", ++ False), ++ 0, ++ G_MAXLONG, ++ False, ++ XA_WINDOW, ++ &type, ++ &format, ++ &nitems, ++ &bytes_after, ++ (guchar **) &xwindow); ++ ++ if (type != XA_WINDOW) ++ return None; ++ ++ gdk_error_trap_push (); ++ XSelectInput (GDK_DISPLAY (), ++ *xwindow, ++ StructureNotifyMask | PropertyChangeMask); ++ XSync (GDK_DISPLAY (), False); ++ ++ if (gdk_error_trap_pop ()) ++ { ++ XFree (xwindow); ++ return None; ++ } ++ ++ result = *xwindow; ++ XFree (xwindow); ++ ++ return result; ++} ++ ++static char* ++get_current_window_manager (void) ++{ ++ Atom utf8_string; ++ Atom atom; ++ Atom type; ++ int result; ++ char *retval; ++ int format; ++ gulong nitems; ++ gulong bytes_after; ++ gchar *val; ++ Window wm_window = get_wm_window (); ++ ++ utf8_string = XInternAtom (GDK_DISPLAY (), "UTF8_STRING", False); ++ atom = XInternAtom (GDK_DISPLAY (), "_NET_WM_NAME", False); ++ ++ gdk_error_trap_push (); ++ ++ result = XGetWindowProperty (GDK_DISPLAY (), ++ wm_window, ++ atom, ++ 0, ++ G_MAXLONG, ++ False, ++ utf8_string, ++ &type, ++ &format, ++ &nitems, ++ &bytes_after, ++ (guchar **)&val); ++ ++ if (gdk_error_trap_pop () || result != Success) ++ return NULL; ++ ++ if (type != utf8_string || format != 8 || nitems == 0) ++ { ++ if (val) ++ XFree (val); ++ ++ return NULL; ++ } ++ ++ if (!g_utf8_validate (val, nitems, NULL)) ++ { ++ XFree (val); ++ return NULL; ++ } ++ ++ retval = g_strndup (val, nitems); ++ ++ XFree (val); ++ ++ return retval; ++} ++ ++static gboolean ++compiz_started (void) ++{ ++ gboolean result; ++ char *wm = get_current_window_manager (); ++ ++ result = wm && strcmp (wm, "compiz") == 0; ++ ++ g_free (wm); ++ ++ return result; ++} ++ ++typedef struct TimedDialogInfo { ++ AppearanceData *app; ++ GTimer *timer; ++ GtkWidget *button; ++} TimedDialogInfo; ++ ++static WindowManager ++current_configured_wm (AppearanceData *app, ++ GError **err) ++{ ++ GError *tmp = NULL; ++ ++ const char *str = gconf_client_get_string (app->client, ++ WINDOW_MANAGER_KEY, ++ &tmp); ++ ++ if (tmp) ++ { ++ g_propagate_error (err, tmp); ++ return METACITY; ++ } ++ ++ if (str && strcmp (str, "compiz") == 0) ++ return COMPIZ; ++ else ++ return METACITY; ++} ++ ++static void ++show_error (const GError *err) ++{ ++ GtkWidget *dialog; ++ ++ if (!err) ++ return; ++ ++ dialog = gtk_message_dialog_new (NULL, ++ GTK_DIALOG_DESTROY_WITH_PARENT, ++ GTK_MESSAGE_WARNING, ++ GTK_BUTTONS_OK, ++ err->message); ++ ++ gtk_window_set_title (GTK_WINDOW (dialog), ""); ++ ++ gtk_dialog_run (GTK_DIALOG (dialog)); ++ gtk_widget_destroy (dialog); ++} ++ ++struct TimeoutData { ++ int time; ++ GtkLabel *label; ++ GtkDialog *dialog; ++ gboolean timed_out; ++}; ++ ++static gboolean ++free_at_idle (gpointer data) ++{ ++ g_free (data); ++ return FALSE; ++} ++ ++static char* ++idle_free (char *str) ++{ ++ g_idle_add (free_at_idle, str); ++ return str; ++} ++ ++static char * ++timeout_string (int time) ++{ ++ char *str = g_strdup_printf (ngettext ("Testing the new settings. If you don't respond in %d second the previous settings will be restored.", "Testing the new settings. If you don't respond in %d seconds the previous settings will be restored.", time), time); ++ ++ return idle_free (str); ++} ++ ++static gboolean ++save_timeout_callback (gpointer data) ++{ ++ struct TimeoutData *timeData = data; ++ ++ timeData->time--; ++ ++ if (timeData->time == 0) ++ { ++ gtk_dialog_response (timeData->dialog, GTK_RESPONSE_NO); ++ timeData->timed_out = TRUE; ++ return FALSE; ++ } ++ ++ gtk_label_set_text (timeData->label, timeout_string (timeData->time)); ++ ++ return TRUE; ++} ++ ++static gboolean ++run_timed_dialog (AppearanceData *app) ++{ ++ GtkWidget *dialog; ++ GtkWidget *hbox; ++ GtkWidget *vbox; ++ GtkWidget *label; ++ GtkWidget *label_sec; ++ GtkWidget *image; ++ int res; ++ struct TimeoutData timeout_data; ++ guint timeout; ++ ++ dialog = gtk_dialog_new (); ++ gtk_window_set_transient_for (GTK_WINDOW (dialog), ++ GTK_WINDOW (app->dialog)); ++ gtk_window_set_destroy_with_parent (GTK_WINDOW (dialog), TRUE); ++ gtk_window_set_modal (GTK_WINDOW (dialog), TRUE); ++ gtk_container_set_border_width (GTK_CONTAINER (dialog), 12); ++ gtk_dialog_set_has_separator (GTK_DIALOG (dialog), FALSE); ++ gtk_window_set_title (GTK_WINDOW (dialog), _("Keep Settings")); ++ gtk_window_set_position (GTK_WINDOW(dialog), GTK_WIN_POS_CENTER_ALWAYS); ++ ++ label = gtk_label_new (NULL); ++ gtk_label_set_markup (GTK_LABEL (label), ++ idle_free (g_strdup_printf ("%s", ++ _("Do you want to keep these settings?")))); ++ image = gtk_image_new_from_stock (GTK_STOCK_DIALOG_QUESTION, ++ GTK_ICON_SIZE_DIALOG); ++ gtk_misc_set_alignment (GTK_MISC (image), 0.5, 0.0); ++ ++ gtk_label_set_line_wrap (GTK_LABEL (label), TRUE); ++ gtk_label_set_selectable (GTK_LABEL (label), TRUE); ++ gtk_misc_set_alignment (GTK_MISC (label), 0.0, 0.5); ++ ++ label_sec = gtk_label_new (timeout_string (REVERT_COUNT)); ++ gtk_label_set_line_wrap (GTK_LABEL (label_sec), TRUE); ++ gtk_label_set_selectable (GTK_LABEL (label_sec), TRUE); ++ gtk_misc_set_alignment (GTK_MISC (label_sec), 0.0, 0.5); ++ ++ hbox = gtk_hbox_new (FALSE, 6); ++ vbox = gtk_vbox_new (FALSE, 6); ++ ++ gtk_box_pack_start (GTK_BOX (vbox), label, TRUE, TRUE, 0); ++ gtk_box_pack_start (GTK_BOX (vbox), label_sec, TRUE, TRUE, 0); ++ gtk_box_pack_start (GTK_BOX (hbox), image, FALSE, FALSE, 0); ++ gtk_box_pack_start (GTK_BOX (hbox), vbox, TRUE, TRUE, 0); ++ gtk_box_pack_start (GTK_BOX (GTK_DIALOG (dialog)->vbox), ++ hbox, ++ FALSE, ++ FALSE, ++ 0); ++ gtk_dialog_add_buttons (GTK_DIALOG (dialog), ++ _("Use _previous settings"), ++ GTK_RESPONSE_NO, ++ _("_Keep settings"), ++ GTK_RESPONSE_YES, ++ NULL); ++ ++ gtk_widget_show_all (hbox); ++ ++ timeout_data.time = REVERT_COUNT; ++ timeout_data.label = GTK_LABEL (label_sec); ++ timeout_data.dialog = GTK_DIALOG (dialog); ++ timeout_data.timed_out = FALSE; ++ ++ timeout = g_timeout_add (1000, save_timeout_callback, &timeout_data); ++ res = gtk_dialog_run (GTK_DIALOG (dialog)); ++ ++ if (!timeout_data.timed_out) ++ g_source_remove (timeout); ++ ++ gtk_widget_destroy (dialog); ++ ++ return (res == GTK_RESPONSE_YES); ++} ++ ++static gboolean ++show_dialog_timeout (gpointer data) ++{ ++ TimedDialogInfo *info = data; ++ gboolean has_compiz; ++ ++ gtk_window_present (GTK_WINDOW (info->app->dialog)); ++ ++ has_compiz = compiz_started (); ++ ++ if (has_compiz || ++ g_timer_elapsed (info->timer, ++ NULL) > SECONDS_WE_WILL_WAIT_FOR_COMPIZ_TO_START) ++ { ++ if (has_compiz) ++ { ++ set_busy (info->app->dialog, FALSE); ++ ++ if (run_timed_dialog (info->app)) ++ apply_settings (info->app, ++ info->app->desktop_effects_level >= 1); ++ else ++ gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (info->button), ++ TRUE); ++ } ++ else ++ { ++ GtkWidget *dialog; ++ ++ gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (info->button), ++ TRUE); ++ ++ set_busy (info->app->dialog, FALSE); ++ ++ dialog = gtk_message_dialog_new ((GtkWindow*) info->app->dialog, ++ GTK_DIALOG_DESTROY_WITH_PARENT, ++ GTK_MESSAGE_WARNING, ++ GTK_BUTTONS_OK, ++ _("Desktop effects could not be enabled")); ++ ++ gtk_window_set_title (GTK_WINDOW (dialog), ""); ++ gtk_dialog_run (GTK_DIALOG (dialog)); ++ gtk_widget_destroy (dialog); ++ } ++ ++ gtk_widget_set_sensitive (info->app->dialog, TRUE); ++ ++ g_timer_destroy (info->timer); ++ g_free (info); ++ ++ return FALSE; ++ } ++ ++ return TRUE; ++} ++ ++static gboolean ++start_compiz (AppearanceData *app, ++ GError **err) ++{ ++ if (!g_spawn_command_line_async ("compiz --replace", err)) ++ return FALSE; ++ ++ app->compiz_running = TRUE; ++ ++ return TRUE; ++} ++ ++static gboolean ++start_metacity (AppearanceData *app, GError **err) ++{ ++ if (!g_spawn_command_line_async ("metacity --replace", err)) ++ return FALSE; ++ ++ app->compiz_running = FALSE; ++ ++ return TRUE; ++} ++ ++static gboolean ++has_composite () ++{ ++ int dummy1; ++ int dummy2; ++ ++ if (XCompositeQueryExtension (GDK_DISPLAY (), &dummy1, &dummy2)) ++ return TRUE; ++ ++ return FALSE; ++} ++ ++static void ++show_alert (const char *text) ++{ ++ GtkWidget *dialog; ++ ++ dialog = gtk_message_dialog_new (NULL, ++ GTK_DIALOG_MODAL, ++ GTK_MESSAGE_ERROR, ++ GTK_BUTTONS_OK, ++ text); ++ ++ gtk_dialog_run (GTK_DIALOG (dialog)); ++} ++ ++static gboolean ++are_effects_enabled (AppearanceData* app, ++ const gchar** effects_list) ++{ ++ int i; ++ gboolean res = TRUE; ++ GError *tmp = NULL; ++ GSList *plugins; ++ ++ plugins = get_plugins (app, &tmp); ++ for (i = 0; effects_list[i] != NULL; i++) ++ res &= contains_string (plugins, effects_list[i]); ++ ++ return res; ++} ++ ++static gboolean ++reset_plugins (AppearanceData *app) ++{ ++ GError *error = NULL; ++ ++ return gconf_client_unset (app->client, PLUGIN_LIST_KEY, &error); ++} ++ ++static gboolean ++are_normal_effects_enabled (AppearanceData *app) ++{ ++ gboolean res = TRUE; ++ GError *err = NULL; ++ GSList *plugins, *default_plugins; ++ ++ default_plugins = gconf_value_get_list ( gconf_client_get_default_from_schema (app->client, PLUGIN_LIST_KEY, &err)); ++ ++ err = NULL; ++ plugins = get_plugins (app, &err); ++ for(;default_plugins; default_plugins = g_slist_next(default_plugins)) ++ res &= contains_string(plugins, gconf_value_get_string(default_plugins->data)); ++ ++ return res; ++} ++ ++static gboolean ++are_extra_effects_enabled (AppearanceData *app) ++{ ++ return (are_effects_enabled (app, extra_effects) && ++ are_normal_effects_enabled (app)); ++} ++ ++static gint ++get_effects_level (AppearanceData *data) ++{ ++ if (data->compiz_running) ++ { ++ if (are_extra_effects_enabled (data)) ++ return EXTRA_EFFECTS; ++ else if (are_normal_effects_enabled (data)) ++ return NORMAL_EFFECTS; ++ else ++ return CUSTOM_EFFECTS; ++ } ++ else ++ return NO_EFFECTS; ++} ++ ++static gboolean ++enable_normal_effects (AppearanceData* app) ++{ ++ return reset_plugins (app); ++} ++ ++static gboolean ++enable_extra_effects (AppearanceData* app) ++{ ++ GError *err = NULL; ++ GSList *plugins = NULL; ++ int i; ++ ++ reset_plugins (app); ++ ++ plugins = get_plugins (app, err); ++ for (i = 0; extra_effects[i] != NULL; i++) ++ plugins = g_slist_append (plugins, ++ (gchar*) extra_effects[i]); ++ ++ err = NULL; ++ gconf_client_set_list (app->client, ++ PLUGIN_LIST_KEY, ++ GCONF_VALUE_STRING, ++ plugins, ++ &err); ++ ++ return TRUE; ++} ++ ++static void ++on_effects_toggle (GtkWidget *widget, ++ gpointer user_data) ++{ ++ AppearanceData *appdata = user_data; ++ GtkWidget *previously_selected_button; ++ static gint old_effects_level; ++ static gboolean do_init = TRUE; ++ gint i; ++ GError *err = NULL; ++ ++ if (do_init == TRUE) ++ { ++ old_effects_level = get_effects_level (appdata); ++ do_init = FALSE; ++ } ++ ++ if (!gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (widget))) ++ return; ++ ++ previously_selected_button = glade_xml_get_widget (appdata->xml, ++ effect_choices [old_effects_level]); ++ ++ /* Look for the button which has been selected */ ++ for (i = 0; i < G_N_ELEMENTS (effect_choices); i++) ++ { ++ if (widget == glade_xml_get_widget(appdata->xml, ++ effect_choices [i])) ++ break; ++ } ++ ++ appdata->desktop_effects_level = i; ++ ++ if (appdata->desktop_effects_level >= 1) ++ { ++ if (check_graphics_driver()) ++ { ++ show_info (_("Please run \"Apperance/Desktop Effects\" again after restarting " ++ "the computer, when the new graphics driver is active.")); ++ g_signal_handlers_block_by_func (widget, ++ on_effects_toggle, ++ appdata); ++ gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (glade_xml_get_widget(appdata->xml, ++ effect_choices [old_effects_level])), ++ TRUE); ++ g_signal_handlers_unblock_by_func (widget, ++ on_effects_toggle, ++ appdata); ++ return; ++ } ++ ++ if (!has_composite ()) ++ { ++ show_alert ("The Composite extension is not available"); ++ return; ++ } ++ ++ if (old_effects_level == 0) ++ start_compiz (appdata, &err); ++ ++ if (appdata->desktop_effects_level == NORMAL_EFFECTS) ++ enable_normal_effects (appdata); ++ ++ if (appdata->desktop_effects_level == EXTRA_EFFECTS) ++ enable_extra_effects (appdata); ++ } ++ else ++ { ++ apply_settings (appdata, FALSE); ++ start_metacity (appdata, &err); ++ } ++ ++ if (err) ++ { ++ show_error (err); ++ ++ g_signal_handlers_block_by_func (widget, ++ on_effects_toggle, ++ appdata); ++ gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (glade_xml_get_widget (appdata->xml, ++ effect_choices [old_effects_level])), ++ TRUE); ++ g_signal_handlers_unblock_by_func (widget, ++ on_effects_toggle, ++ appdata); ++ } ++ else ++ { ++ if (appdata->desktop_effects_level >= 1 && ++ old_effects_level == 0) ++ { ++ TimedDialogInfo *info = g_new0 (TimedDialogInfo, 1); ++ ++ info->app = appdata; ++ info->button = previously_selected_button; ++ info->timer = g_timer_new (); ++ ++ set_busy (info->app->dialog, TRUE); ++ gtk_widget_set_sensitive (appdata->dialog, FALSE); ++ ++ g_timeout_add (250, show_dialog_timeout, info); ++ } ++ } ++ ++ old_effects_level = i; ++} ++ ++void ++effects_init (AppearanceData *data) ++{ ++ GError *error = NULL; ++ GtkWidget *level_effects_button = NULL; ++ GtkWidget *hbox_custom_effects = NULL; ++ WindowManager wm = METACITY; ++ gint i; ++ const char *str = get_current_window_manager (); ++ if (str && strcmp (str, "compiz") == 0) ++ wm = COMPIZ; ++ g_free (str); ++ ++ data->compiz_running = (wm == COMPIZ); ++ data->compiz_was_running = (wm == COMPIZ); ++ data->dialog = glade_xml_get_widget (data->xml, "appearance_window"); ++ ++ data->desktop_effects_level = get_effects_level (data); ++ ++ for (i = 0; i < G_N_ELEMENTS (effect_choices); i++) ++ { ++ level_effects_button = glade_xml_get_widget (data->xml, ++ effect_choices[i]); ++ if (i == data->desktop_effects_level) ++ gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (level_effects_button), ++ TRUE); ++ ++ g_signal_connect (level_effects_button, ++ "toggled", ++ G_CALLBACK (on_effects_toggle), ++ data); ++ } ++ ++ hbox_custom_effects = glade_xml_get_widget (data->xml, ++ "hbox_custom_effects"); ++ if (check_simple_ccsm ()) ++ { ++ GtkWidget *button = NULL; ++ ++ gtk_widget_show (hbox_custom_effects); ++ button = glade_xml_get_widget (data->xml, ++ "custom_effects_edit_button"); ++ g_signal_connect (button, ++ "clicked", ++ G_CALLBACK (run_simple_ccsm), ++ NULL); ++ } ++ else ++ gtk_widget_hide (hbox_custom_effects); ++} ++ +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.23.90/capplets/appearance/appearance-effects.h gnome-control-center-2.23.90.new/capplets/appearance/appearance-effects.h +--- gnome-control-center-2.23.90/capplets/appearance/appearance-effects.h 1970-01-01 01:00:00.000000000 +0100 ++++ gnome-control-center-2.23.90.new/capplets/appearance/appearance-effects.h 2008-09-12 15:48:01.000000000 +0200 +@@ -0,0 +1,21 @@ ++/* ++ * Copyright (C) 2007 Canonical ++ * Written by Michael Vogt ++ * All Rights Reserved ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. ++ */ ++ ++void effects_init (AppearanceData *data); +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.23.90/capplets/appearance/appearance.h gnome-control-center-2.23.90.new/capplets/appearance/appearance.h +--- gnome-control-center-2.23.90/capplets/appearance/appearance.h 2008-09-12 15:47:57.000000000 +0200 ++++ gnome-control-center-2.23.90.new/capplets/appearance/appearance.h 2008-09-12 15:48:01.000000000 +0200 +@@ -71,6 +71,12 @@ + gchar *revert_windowtitle_font; + gchar *revert_monospace_font; + ++ /* effects */ ++ gboolean compiz_running; ++ gboolean compiz_was_running; ++ gint desktop_effects_level; ++ GtkWidget *dialog; ++ + /* style */ + GdkPixbuf *gtk_theme_icon; + GdkPixbuf *window_theme_icon; +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.23.90/capplets/appearance/appearance-main.c gnome-control-center-2.23.90.new/capplets/appearance/appearance-main.c +--- gnome-control-center-2.23.90/capplets/appearance/appearance-main.c 2008-09-12 15:47:57.000000000 +0200 ++++ gnome-control-center-2.23.90.new/capplets/appearance/appearance-main.c 2008-09-12 15:48:01.000000000 +0200 +@@ -156,6 +156,7 @@ + g_strfreev (wallpaper_files); + font_init (data); + ui_init (data); ++ effects_init (data); + + /* prepare the main window */ + w = glade_xml_get_widget (data->xml, "appearance_window"); +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.23.90/capplets/appearance/data/appearance.glade gnome-control-center-2.23.90.new/capplets/appearance/data/appearance.glade +--- gnome-control-center-2.23.90/capplets/appearance/data/appearance.glade 2008-09-12 15:47:57.000000000 +0200 ++++ gnome-control-center-2.23.90.new/capplets/appearance/data/appearance.glade 2008-09-12 15:48:01.000000000 +0200 +@@ -1815,6 +1815,281 @@ + False + + ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ 6 ++ 18 ++ True ++ ++ ++ True ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ 0 ++ True ++ True ++ ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ 6 ++ /usr/share/gnome-control-center/pixmaps/visual-effects_none.svg ++ 6 ++ ++ ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ 6 ++ <b>_None:</b> Provides a simple desktop environment without any effects. ++ True ++ True ++ True ++ ++ ++ 1 ++ ++ ++ ++ ++ ++ ++ False ++ False ++ 6 ++ ++ ++ ++ ++ True ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ 0 ++ True ++ True ++ no_effects_button ++ ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ 6 ++ /usr/share/gnome-control-center/pixmaps/visual-effects_normal.svg ++ 6 ++ ++ ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ 6 ++ <b>N_ormal:</b> Provides improved usability and good balance between attractiveness and moderate performance requirements. ++ True ++ True ++ True ++ ++ ++ 1 ++ ++ ++ ++ ++ ++ ++ False ++ False ++ 6 ++ 1 ++ ++ ++ ++ ++ True ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ 0 ++ True ++ True ++ no_effects_button ++ ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ 6 ++ /usr/share/gnome-control-center/pixmaps/visual-effects_extra.svg ++ 6 ++ ++ ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ 6 ++ <b>E_xtra:</b> Provides more aesthetically pleasing set of effects. Requires faster graphics card. ++ True ++ True ++ True ++ ++ ++ 1 ++ ++ ++ ++ ++ ++ ++ False ++ False ++ 6 ++ 2 ++ ++ ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ True ++ ++ ++ True ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ 0 ++ True ++ True ++ no_effects_button ++ ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ 6 ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ 6 ++ /usr/share/gnome-control-center/pixmaps/visual-effects_custom.svg ++ 6 ++ ++ ++ False ++ False ++ ++ ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ <b>C_ustom:</b> Uses custom set of effects. ++ True ++ True ++ True ++ ++ ++ False ++ False ++ 1 ++ ++ ++ ++ ++ ++ ++ False ++ False ++ ++ ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ ++ ++ False ++ False ++ ++ ++ ++ ++ True ++ True ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ gtk-preferences ++ True ++ 0 ++ ++ ++ False ++ False ++ 1 ++ ++ ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ ++ ++ False ++ False ++ 2 ++ ++ ++ ++ ++ False ++ False ++ 6 ++ 1 ++ ++ ++ ++ ++ False ++ False ++ 3 ++ ++ ++ ++ ++ 4 ++ ++ ++ ++ ++ True ++ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK ++ Visual Effects ++ ++ ++ tab ++ 4 ++ False ++ ++ + + + 1 +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.23.90/capplets/appearance/Makefile.am gnome-control-center-2.23.90.new/capplets/appearance/Makefile.am +--- gnome-control-center-2.23.90/capplets/appearance/Makefile.am 2008-09-12 15:47:57.000000000 +0200 ++++ gnome-control-center-2.23.90.new/capplets/appearance/Makefile.am 2008-09-12 15:48:01.000000000 +0200 +@@ -9,6 +9,8 @@ + appearance.h \ + appearance-desktop.c \ + appearance-desktop.h \ ++ appearance-effects.c\ ++ appearance-effects.h\ + appearance-font.c \ + appearance-font.h \ + appearance-main.c \ +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.23.90/po/POTFILES.in gnome-control-center-2.23.90.new/po/POTFILES.in +--- gnome-control-center-2.23.90/po/POTFILES.in 2008-09-12 15:47:57.000000000 +0200 ++++ gnome-control-center-2.23.90.new/po/POTFILES.in 2008-09-12 15:48:01.000000000 +0200 +@@ -11,6 +11,7 @@ + capplets/accessibility/at-properties/at-properties.desktop.in.in + capplets/accessibility/at-properties/main.c + capplets/appearance/appearance-desktop.c ++capplets/appearance/appearance-effects.c + capplets/appearance/appearance-font.c + capplets/appearance/appearance-main.c + capplets/appearance/appearance-style.c --- gnome-control-center-2.24.0.1.orig/debian/patches/17_default_applications_firefox_3.patch +++ gnome-control-center-2.24.0.1/debian/patches/17_default_applications_firefox_3.patch @@ -0,0 +1,12 @@ +diff -Nur -x '*.orig' -x '*~' gnome-control-center-2.22.1/capplets/default-applications/gnome-default-applications.xml.in gnome-control-center-2.22.1.new/capplets/default-applications/gnome-default-applications.xml.in +--- gnome-control-center-2.22.1/capplets/default-applications/gnome-default-applications.xml.in 2008-04-14 16:00:59.000000000 +0100 ++++ gnome-control-center-2.22.1.new/capplets/default-applications/gnome-default-applications.xml.in 2008-04-14 16:01:36.000000000 +0100 +@@ -57,7 +57,7 @@ + <_name>Firefox + firefox + firefox %s +- firefox ++ firefox-3.0 + false + true + firefox -new-tab "%s"