--- gnome-power-manager-2.24.0.orig/debian/copyright +++ gnome-power-manager-2.24.0/debian/copyright @@ -0,0 +1,39 @@ +This package was debianized by Riccardo Setti + +It was downloaded from http://ftp.gnome.org/pub/GNOME/sources/gnome-power-manager/ + +Copyright Holder: Richard Hughes + William Jon McCann + Jaap A. Haitsma +License: + + This package is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This package is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this package; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +On Debian systems, the complete text of the GNU General +Public License can be found in `/usr/share/common-licenses/GPL'. + +src/eggtryicon.c src/eggtryicon.h are copyright of Anders Carlsson +and are relased under the terms of the GPL 2 + +On Debian systems, the complete text of the GNU General +Public License can be found in `/usr/share/common-licenses/GPL'. + +src/gtk-stock-icon.c, src/gtk-stock-icon.h are copyright of Colin Walters &2 + exit 1 + ;; +esac + +exit 0 --- gnome-power-manager-2.24.0.orig/debian/docs +++ gnome-power-manager-2.24.0/debian/docs @@ -0,0 +1,3 @@ +NEWS +README +TODO --- gnome-power-manager-2.24.0.orig/debian/changelog +++ gnome-power-manager-2.24.0/debian/changelog @@ -0,0 +1,634 @@ +gnome-power-manager (2.24.0-0ubuntu13) jaunty; urgency=low + + * Drop 79-enable-battery-hotkey.patch. It appears that HAL is now sending + a dbus event for Battery hotkey presses, so gpm doesn't actually need to + directly listen anymore. (LP: #314547) + + -- Mario Limonciello Thu, 08 Jan 2009 12:40:10 -0600 + +gnome-power-manager (2.24.0-0ubuntu12) jaunty; urgency=low + + * 79-enable-battery-hotkey.patch: Enable hotkey that got disabled + at 2.24.0's release. (LP: #281134) + + -- Mario Limonciello Tue, 02 Dec 2008 13:54:53 -0600 + +gnome-power-manager (2.24.0-0ubuntu11) jaunty; urgency=low + + * 77-hal-brightness-in-hardware.patch: Don't fail to show the OSD + when brightness changing is supported in hardware. (LP: #304187) + * 78-xrandr-hal-fallback.patch: Fall back to HAL if xrandr calls + do fail or will be failing. + + -- Mario Limonciello Mon, 01 Dec 2008 02:56:38 -0500 + +gnome-power-manager (2.24.0-0ubuntu10) jaunty; urgency=low + + * Fix Werror harder (in configure.ac), revert the debian/rules addition to + use --enable-compile-warnings=yes (adding 75_disable_Werror.patch) + * add 76_autoreconf.patch to properly regenerate the autoconf magic after + configure.ac changes + + -- Oliver Grawert Thu, 20 Nov 2008 17:38:17 +0100 + +gnome-power-manager (2.24.0-0ubuntu9) jaunty; urgency=low + + * Added --enable-compile-warnings=yes to the configure string to disable + -Werror, which is neccessary on port architectures due to warnings caused + by gstreamer's headers on those architectures. + + -- Michael Casadevall Wed, 19 Nov 2008 09:22:55 -0500 + +gnome-power-manager (2.24.0-0ubuntu8) intrepid; urgency=low + + * Removing 02_gnome-power-manager.desktop.in.in.patch as it shouldn't be + needed and is causing user feedback with the new GNOME Session in + Intrepid. Fixes LP: #278089 + + -- Ted Gould Fri, 17 Oct 2008 08:45:41 -0500 + +gnome-power-manager (2.24.0-0ubuntu7) intrepid; urgency=low + + * 25_sparc_char_to_int.patch: Changing a variable to be an int * + instead of a char * so that it has the right alignment. This + is a build fix for Sparc. + * 26_check_for_active_session.patch: Checks to ensure that we've + got an active session before accepting commands from the HAL. This + removes the case where a power button event is recieved by all logged + in users. Only active if PolicyKit is configured, which it is not + in current packaging. + + -- Ted Gould Wed, 15 Oct 2008 22:21:46 -0500 + +gnome-power-manager (2.24.0-0ubuntu6) intrepid; urgency=low + + * Adding 21_idle_key_removal.patch which makes it so that the glib + mainloop has to hit the idle state before we'll accept another key + from X. This should remove quickly repeated keys and keys that were + queued before suspend. (LP: #261084) + * Adding 22_xfce_desktop_files.patch which adds XFCE to the ShowIn + properties of the preferences and statistics desktop files. + * Added 23_numlock_hotkey.patch which is the changes from 0ubuntu4 and put + it into a patch. + * Adding 24_interactive_shutdown_dbus.patch which is based on the patch + in GNOME Bug: #507393. Made to build on 2.24.0 and also put in more + error checking and a fallback to XSMP when DBus based session management + is not available. (LP: #252795) + + -- Ted Gould Wed, 15 Oct 2008 11:10:23 -0500 + +gnome-power-manager (2.24.0-0ubuntu5) intrepid; urgency=low + + * debian/patches/20_fix_percentage_closures.patch: When unit->percentage + was changed to a float for 2.24 not all the signals that deal in + percentages had their signatures updated. Use the correct type for + the signals that take a percentage, stopping them from crashing on + platforms where int and float differ in size (LP: #269083) + - http://bugzilla.gnome.org/show_bug.cgi?id=550817 + + -- James Westby Mon, 13 Oct 2008 23:54:30 +0100 + +gnome-power-manager (2.24.0-0ubuntu4) intrepid; urgency=low + + * src/gpm-button.c:gpm_button_grab_keystring: use AnyModifier modmask with + XGrabKey so that hotkeys being handled through gpm-button still work if + e.g. numlock happens to be on (thanks, Bryce Harrington, LP: #280646) + + -- Matt Zimmerman Fri, 10 Oct 2008 09:55:10 +0100 + +gnome-power-manager (2.24.0-0ubuntu3) intrepid; urgency=low + + * Removed 19_fix_critical_message.patch which was applied upstream + but was still getting applied in other areas of gpm-cell-array.c. + (LP: #274681) + + -- Ted Gould Mon, 29 Sep 2008 13:26:44 -0500 + +gnome-power-manager (2.24.0-0ubuntu2) intrepid; urgency=low + + * 03-system-policy.patch: Fixing to remove gpm-main.c.orig + + -- Ted Gould Tue, 23 Sep 2008 09:44:41 -0500 + +gnome-power-manager (2.24.0-0ubuntu1) intrepid; urgency=low + + * Upstream Release + * 75-ignore-long-failed-suspends.patch: Removed. Upstream. + * 03-system-policy.patch: Updated with upstream release + * 09_lid_always_blanks.patch: Updated with upstream release + * 18_policy_action_fallback.patch: Updated with upstream release + + -- Ted Gould Mon, 22 Sep 2008 23:54:21 -0500 + +gnome-power-manager (2.23.91-0ubuntu2) intrepid; urgency=low + + * Added two patches from Joakim Andersson his + comments on the patches are below. + * Added 18_policy_actions_fallback.patch which makes policy actions + fall back to per-percent policy if the battery profile is not good + enough yet. It also ignores the accuracy of the battery profile when + the GCONF key 'use_time_for_policy' is disabled. LP: #135548 + * Added 19_fix_critical_message.patch which fixes an error in the + notification messages for critical battery. These messages would + always show 0% battery remaining, since the cell unit object was + reset while generating one of the strings used in the message. + + * 18_policy_actions_fallback.patch: Modified by Richard Hughes to + make cleaner and smaller. Now keeps most prototypes intact. + * I updated 18_policy_actions_fallback.patch from Richard's version + to make it apply cleanly on 2.23.91. + + -- Ted Gould Wed, 10 Sep 2008 09:36:40 -0500 + +gnome-power-manager (2.23.91-0ubuntu1) intrepid; urgency=low + + * Upstream release: + * Handle "unknown" battery technology in HAL + * Bug fixes (LP: #260314) + * 75-ignore-long-failed-suspends.patch: added to prevent inaccurately + indicating failed suspends when they were >= 6 hours. (LP: #242713) + From Mario Limonciello + * 14_inhibit_tool.patch: A small tool to allow command line apps to + use the inhibit DBus interface easily. + * 17_icon_cache.patch: A patch to build the icon cache in the correct + directory. + * 50-r2882-fix-547766.patch: Removed as merged upstream. + + -- Ted Gould Mon, 08 Sep 2008 10:33:32 -0500 + +gnome-power-manager (2.23.6-0ubuntu2) intrepid; urgency=low + + * debian/patches/50-r2882-fix-547766.patch: upstream fix for crash in + gpm_cell_array_update gpm-cell-array.c:273 (LP: #260314) + + -- Matt Zimmerman Mon, 08 Sep 2008 09:43:04 +0100 + +gnome-power-manager (2.23.6-0ubuntu1) intrepid; urgency=low + + * debian/patches/09_lid_always_blanks.patch: Update for new upstream + * debian/control, added PolicyKit DBus and Grant to reflect changes + in upstream configure files. + * Updated upstream version (2.23.6) + + -- Ted Gould Tue, 19 Aug 2008 13:55:19 -0500 + +gnome-power-manager (2.23.1-0ubuntu1) intrepid; urgency=low + + * 13_bugreport_bin_sh.patch, adding a "#!/bin/sh" to the top of + gnome-power-bugreport.sh so that it is more specific about how it + executes. LP: #238546 + * 11_round_percentage.patch: Adding in math.h to implicitly define + a built in function. New errors are sucking. + * 09_lid_always_blanks.patch: Remove some variables that are now causing + errors as -Werror is set. + * Added patch 11_round_percentage.patch which causes the percentage + to discrete value conversion to use round. This should fix the + bug where the AC plug/unplug causes the backlight to drop. That + bug is LP# + * Added patch 12_warning_gconf_update.patch which causes the warning and + action values from GConf to be updated on GConf changes. Makes debugging + easier. + * control.in: Expanding dependencies to make them easier to read + * control.in: Adding policy kit and xrandr as build dependencies + * 10_keyboard_brightness_gconf.patch: Applied upstream + * 03-system-policy.patch: part of the patch was applied upstream, rebuild + to work with 2.23.1 + * 03_always_get_hw_backlight.patch: Removing as the functionality should + be taken care of by the new 'trust cache' framework. + * 04_brightness_events.patch: Removing. The code upstream has change + significantly and logic is roughly the same now. May require some + additional patching, but will wait on user feedback. + * 06_inhibit_applet_clear.patch: Applied upstream + * 07_inhibit_applet_icon_resize.patch: Applied upstream + * Packing new upstream development version. + + -- Ted Gould Mon, 16 Jun 2008 14:53:04 -0700 + +gnome-power-manager (2.22.1-1ubuntu4) hardy; urgency=low + + * Adding in patch 10_keyboard_brightness_gconf.patch which fixes some + cut-and-paste errors in the keyboard brightness server which set the + wrong gconf keys. + * Updating 04_brightness_events.patch so that idle changes work when + we're not on AC and work in the right direction. Also updating so + that we're not using the GCONF key for AC brightness just a fixed + value as some people have very different values for AC and it isn't + required for the logic. LP: #199522 + + -- Ted Gould Thu, 10 Apr 2008 06:27:11 -0700 + +gnome-power-manager (2.22.1-1ubuntu3) hardy; urgency=low + + * Adding patch 09_lid_always_blanks.patch to make it so that a lid + button will at least blank even when inhibitted. It also makes it so + that inhibit can't block critical battery actions. LP: #193617 + + -- Ted Gould Tue, 08 Apr 2008 08:42:22 -0700 + +gnome-power-manager (2.22.1-1ubuntu2) hardy; urgency=low + + * Removing 01_no_backlight_on_idle.patch as the code is covered + in 04_brightness_events.patch and it is breaking things by being + in the general callback. LP: #207553 + + -- Ted Gould Tue, 01 Apr 2008 15:34:51 -0700 + +gnome-power-manager (2.22.1-1ubuntu1) hardy; urgency=low + + * Removing 01-use-panel-logout.patch we should be logging out using + session managment not calling a command line utility. Consitency + would be better gained by fixing the other applications. + * Removing 05_readd_gnome_client.patch as it was merged upstream + * Removing 08_remove_lid_sounds.patch as it was merged upstream + + -- Ted Gould Tue, 01 Apr 2008 14:11:17 -0700 + +gnome-power-manager (2.22.1-2) UNRELEASED; urgency=low + + * 02-ups-invalid-free.patch: patch from Avery Fay to fix invalid free + when the UPS level is too low. Closes: #482431. + + -- Josselin Mouette Sun, 08 Jun 2008 20:44:47 +0200 + +gnome-power-manager (2.22.1-1) unstable; urgency=low + + * New upstream release. + * debian/patches/73-getbrightness-returns-int.patch: + - Removed. Merged upstream + * Shutdown the gstreamer pipeline after playing a sound. Prevents a memory + exhausting bug. (Closes: #472637) + * debian/control.in: Set the Maintainer to the gnome team. Riccardo hasn't + worked on the package for months. + + -- Sjoerd Simons Sat, 29 Mar 2008 13:52:49 +0100 + +gnome-power-manager (2.22.0-1) unstable; urgency=low + + [ Michael Biebl ] + * debian/control, debian/control.in + - Add Vcs-* fields. + + [ Sjoerd Simons ] + * New upstream release + * debian/patches/01-use-panel-logout.patch: + - Updated + * debian/patches/02.gnome-power-manager.desktop.in.patch: + - Dropped + * debian/patches/73-getbrightness-returns-int.patch: + - Updated + + -- Sjoerd Simons Tue, 18 Mar 2008 14:52:01 +0100 + +gnome-power-manager (2.20.2-3) unstable; urgency=low + + [ Michael Biebl ] + * debian/patches/03-system-policy.patch + - Make gnome-power-manager claim org.freedesktop.Policy.Power on the + D-Bus system bus on startup. This ensures that gnome-power-manager, + kpowersave and powersaved are not stepping on each other's toes and only + one program is acting on power management events. + + -- Loic Minier Tue, 29 Jan 2008 10:15:41 +0100 + +gnome-power-manager (2.20.2-2) unstable; urgency=low + + * 01-use-panel-logout.patch: use gnome-panel-logout if available + instead of the session's logout window, for the sake of consistency + across the desktop. + * Use the new Homepage field. + + -- Josselin Mouette Sat, 12 Jan 2008 15:56:10 +0100 + +gnome-power-manager (2.22.0-0ubuntu2) hardy; urgency=low + + * Adjusting patch 04_brightness_events.patch based on comments + by Richard Hughes on the gnome-power-manager mailing list. + * Adding in 08_remove_lid_sounds.patch which removes all of the lid + sounds. The are silly and can cause embarassing situtions for + Ubuntu users. (LP: 204067) + + -- Ted Gould Thu, 20 Mar 2008 13:35:46 -0700 + +gnome-power-manager (2.22.0-0ubuntu1) hardy; urgency=low + + * Changing 02.gnome-power-manager.desktop.in.patch to + 02_gnome-power-manager.desktop.in.in.patch to patch the source + file instead of the derived one. + * Adding in 07_inhibit_applet_icon_resize.patch which makes it so that + icons changing size make the applet update it's size. Fixing the + inhibit applet with the Human theme. + * Adding patch 06_inhibit_applet_clear.patch which adds a + gdk_window_clear so that the icon refreshes cleanly. (LP: 139820) + * New upstream release + * Removed 75-fix-memleak-brightness-applet.patch as it's been integrated + into the upstream release. + * Adding patch 05_readd_gnome_client.patch which reverts changes to + gpm-main.c to remove gnome_program_init() which makes it so that + later calls to GNOMEClient break. + * Adding patch '04_brightness_events.patch' which changes the + brightness control from being state based to being event + based. + * Adding in a patch '03_always_get_hw_backlight.patch' which forces + the get brightness function to query instead of using a saved value. + Hopefully fixing many of the idle brightness bugs. + * Adding patch 01_no_backlight_on_idle.patch which was attached on to + Bug # 137598 by Tim Hull. Not sure that it fixes the problem, but + seems like good code to include. + + -- Ted Gould Fri, 14 Mar 2008 14:10:01 -0700 + +gnome-power-manager (2.21.92-0ubuntu2) hardy; urgency=low + + * Add debian/patches/75-fix-memleak-brightness-applet.patch: + Don't leak references in the brightness applet (LP: #196688). + Fix picked from upstream SVN trunk (commit 2680). + + -- Daniel T Chen Mon, 03 Mar 2008 15:49:23 -0500 + +gnome-power-manager (2.21.92-0ubuntu1) hardy; urgency=low + + * Upstream version update. + * HAL work arounds + * Updated icons (much smaller) + * Bug fixes + * and more! + + -- Ted Gould Fri, 15 Feb 2008 14:23:05 -0800 + +gnome-power-manager (2.21.1-0ubuntu1) hardy; urgency=low + + * Upstream unstable release + * debian/control.in + - Added build deps for keyring, applet dev and xmlto + - Modify maintainer + * debian/postinst + - Check for ACPI suspend support + * debian/gconf-defaults + - Added defaults for Ubuntu specific configuration + * debian/rules + - Make power manager autostart + - Handle custom GConf properties + + -- Ted Gould Fri, 21 Dec 2007 09:54:05 -0800 + +gnome-power-manager (2.20.2-1) unstable; urgency=low + + * New upstream bugfix release: + + debian/patches/73-getbrightness-returns-int.patch: + - Updated to apply cleanly again, partially merged upstream. + + debian/patches/71-fix-keyboard-brightness-keys.patch, + debian/patches/72-fixbashizms.patch: + - Dropped, merged upstream. + * debian/control.in: + + Update Standards-Version to 3.7.3, no other changes needed. + + -- Sebastian Dröge Sat, 15 Dec 2007 04:42:54 +0100 + +gnome-power-manager (2.20.1-1) unstable; urgency=low + + [ Josselin Mouette ] + * Depend on hal 0.5.10-1, thanks Nathaniel Smith and Hideki Yamane. + Closes: #443796. + * Drop --enable-checkfg, thanks Alban Browaeys. Closes: #444491. + + [ Sebastian Dröge ] + * New upstream bugfix release. + + -- Sebastian Dröge Sat, 01 Dec 2007 19:17:50 +0100 + +gnome-power-manager (2.20.0-1) unstable; urgency=low + + * New upstream release. + * Added patches: + 71-fix-keyboard-brightness-keys.patch + 72-fixbashizms.patch + 73-getbrightness-returns-int.patch + taken from the Ubuntu package. + * Modified patch: + 02.gnome-power-manager.desktop.in.patch + * Dropped patch: + 01_fix_gpm_dbus_conf.patch + + -- Riccardo Setti Sat, 22 Sep 2007 14:53:46 +0200 + +gnome-power-manager (2.18.3-1) unstable; urgency=low + + * New upstream stable release. + + -- Loic Minier Tue, 22 May 2007 15:09:21 +0200 + +gnome-power-manager (2.18.2-1) unstable; urgency=low + + * New upstream release. + * Dropped 40_link-applets-to-dbus.patch, applied upstream + * Dropped 41_automake.patch, no more useful. + * Adjusted libnotify build-dep. + + -- Riccardo Setti Sun, 22 Apr 2007 12:07:10 +0200 + +gnome-power-manager (2.18.1-1) experimental; urgency=low + + * New upstream release. + + -- Riccardo Setti Sat, 24 Mar 2007 20:15:01 +0100 + +gnome-power-manager (2.18.0-1) experimental; urgency=low + + [ Riccardo Setti ] + * New upstream release. + * Dropped 55_lid_state_tracking.patch + + [ Loic Minier ] + * GNOME team uploads; include uploaders.mk and build-dep on gnome-pkg-tools. + * Misc cleanups: whitespaces and indentation; reword README.Debian. + * Drop DEB_AUTO_UPDATE_AUTOCONF. + * Include CDBS's utils.mk. + * Add a get-orig-source target to retrieve the upstream tarball. + * Include the new check-dist Makefile to prevent accidental uploads to + unstable; bump build-dep on gnome-pkg-tools to >= 0.10. + * Track all stable versions in watch file. + * Build-depend on "libnotify-dev (>= 0.4.3), libnotify-dev-gtk2.10" instead + of "libnotify-dev | libnotify-dev-gtk2.10 (>= 0.4.3)". + * Bump up libnotify-dev build-dep to >= 0.4.3-2 to make the package + autobuildable. + * New patch, 40_link-applets-to-dbus, links applets against dbus-glib to fix + build with non-dbus gnome-vfs; GNOME #422345. + * New patch, 41_automake, automake-1.10 run due to 40_link-applets-to-dbus. + + -- Loic Minier Sat, 24 Mar 2007 19:00:58 +0100 + +gnome-power-manager (2.16.3-1) experimental; urgency=low + + * New upstream release. + * Rebuilt with latest libdbus (closes: 405941) + * Fixed a bug in g-p-m that prevents gnome-screensaver + from displaying any screensavers after g-p-m has put + the display into power saving mode. (closes: 398143) + + -- Riccardo Setti Sun, 19 Nov 2006 14:19:55 +0100 + +gnome-power-manager (2.16.0-2) experimental; urgency=low + + * added 55-lid-state-tracking.patch taken from the ubuntu package + . + + -- Riccardo Setti Sun, 17 Sep 2006 16:50:05 +0200 + +gnome-power-manager (2.16.0-1) experimental; urgency=low + + * New upstream release. + + -- Riccardo Setti Tue, 5 Sep 2006 20:40:30 +0200 + +gnome-power-manager (2.15.92-1) experimental; urgency=low + + * New upstream release. + + -- Riccardo Setti Mon, 21 Aug 2006 20:46:32 +0200 + +gnome-power-manager (2.15.91-1) experimental; urgency=low + + * New upstream release. + + -- Riccardo Setti Fri, 18 Aug 2006 14:52:12 +0200 + +gnome-power-manager (2.14.3-3) unstable; urgency=low + + * Gpm now can handle power button. (Closes: #366628) + * Added support for StartupNotify in launcher (closes: #361522 + * Updated pt_BR translation (thank you Goedson) (closes: #361287) + * Bumped to stadard version. No changes needed. + + -- Riccardo Setti Sun, 13 Aug 2006 21:12:08 +0200 + +gnome-power-manager (2.14.3-2) unstable; urgency=low + + * Pass --with-dbus-services option to configure so the services file is + installed in the right location (Closes: #369372) + + -- Sjoerd Simons Thu, 8 Jun 2006 21:19:54 +0200 + +gnome-power-manager (2.14.3-1) unstable; urgency=low + + * New upstream release + + -- Sjoerd Simons Fri, 26 May 2006 23:56:20 +0200 + +gnome-power-manager (2.14.0-1) unstable; urgency=low + + * New upstream version + + -- Sjoerd Simons Sun, 2 Apr 2006 19:41:33 +0200 + +gnome-power-manager (2.13.93-1) experimental; urgency=low + + * New Upstream + - removed debian/patches/02_gpm_struct_type.patch. Fixed upstream. + + -- Riccardo Setti Sun, 5 Mar 2006 19:45:37 +0100 + +gnome-power-manager (2.13.92-2) experimental; urgency=low + + * debian/patches/02_gpm_struct_type.patch + + Added. Fix compatibility with dbus 0.61 + * Build-depend on libdbus-glib-1-dev (>= 0.61) + * Add myself to uploaders + + -- Sjoerd Simons Fri, 3 Mar 2006 11:48:33 +0100 + +gnome-power-manager (2.13.92-1) experimental; urgency=low + + * New upstream + + -- Riccardo Setti Sun, 26 Feb 2006 22:14:18 +0100 + +gnome-power-manager (2.13.91-2) experimental; urgency=low + + [Riccardo Setti] + + * fixed the installation of the gconf schemas. + - thanks to Marco zufus Presi for provide a patch. + * added 01_fix_gpm_dbus_conf.patch which grants permissions to the + group powerdev + * gpm deps on the last hal in experimental + + [Michael Biebl] + + * added a watch file. + * automatic autotools updated via DEB_AUTO_UPDATE_AUTOCONF flag. + - added build-dep on autoconf + * removed debian/dirs since it was useless. + + -- Riccardo Setti Thu, 23 Feb 2006 21:05:20 +0100 + +gnome-power-manager (2.13.91-1) experimental; urgency=low + + * New Upstream Release. + + -- Riccardo Setti Tue, 21 Feb 2006 00:03:15 +0100 + +gnome-power-manager (2.13.90-1) experimental; urgency=low + + * New upstream. + + -- Riccardo Setti Thu, 16 Feb 2006 14:41:29 +0100 + +gnome-power-manager (2.13.5-1) unstable; urgency=low + + * new upstream + - removed 01_port_to_the_new_libnotify because the last notify code works fine + - gpm depends on hal >= 0.5.6, libtool + - added --disable-scrollkeeper switch + * gpm depends on notification-daemon instead of notify-daemon + + -- Riccardo Setti Sun, 12 Feb 2006 20:45:16 +0100 + +gnome-power-manager (0.3.1-1) unstable; urgency=low + + * First Debian release. + * Initial upload to Debian (closes: #303600) + * based on the ubuntu package. + * src/gpm-libnotify.{c,h}: + - ported to new libnotify api (taken from cvs) + + -- Riccardo Setti Fri, 13 Jan 2006 15:53:43 +0100 + +gnome-power-manager (0.3.1-0ubuntu4) dapper; urgency=low + + * src/gpm-libnotify.{c,h}: + - ported to new libnotify api (taken from cvs) + * debian/control: + - changed dependency from notification-daemon to notify-daemon + + -- Michael Vogt Mon, 2 Jan 2006 21:10:43 +0100 + +gnome-power-manager (0.3.1-0ubuntu3) dapper; urgency=low + + * rebuild against latest dbus + + -- Michael Vogt Wed, 21 Dec 2005 11:11:56 +0100 + +gnome-power-manager (0.3.1-0ubuntu2) dapper; urgency=low + + * suspend by calling gdm-signal directly, rather than by going through + hal (allows suspend without requiring privilege escalation) + + -- Matthew Garrett Tue, 6 Dec 2005 05:43:33 +0000 + +gnome-power-manager (0.3.1-0ubuntu1) dapper; urgency=low + + * new upstream release + + -- Oliver Grawert Thu, 17 Nov 2005 02:42:49 +0100 + +gnome-power-manager (0.2.8.1-1ubuntu1) dapper; urgency=low + + * initial dapper upload + + -- Oliver Grawert Tue, 25 Oct 2005 00:24:15 +0200 + +gnome-power-manager (0.2.8.1-1utopia1) breezy; urgency=low + + * Initial import, based from the universe ubuntu package. + + -- Richard Hughes Mon, 24 Oct 2005 00:49:03 +0100 --- gnome-power-manager-2.24.0.orig/debian/watch +++ gnome-power-manager-2.24.0/debian/watch @@ -0,0 +1,2 @@ +version=3 +http://ftp.gnome.org/pub/GNOME/sources/gnome-power-manager/([\d\.]+)[02468]/gnome-power-manager-([\d\.]*).tar.gz --- gnome-power-manager-2.24.0.orig/debian/README.Debian +++ gnome-power-manager-2.24.0/debian/README.Debian @@ -0,0 +1,10 @@ +GNOME Users: Starting GNOME Power Manager with your GNOME Session +================================================================= + +1) Add yourself to the powerdev group; this group is created by hal + >= 0.5.6+cvs20060219-1. +2) Open System -> Preferences -> Sessions +3) In the Startup Programs tab, click Add +4) Type "gnome-power-manager", click OK. +5) Log out of your gnome session, and log back in again. + --- gnome-power-manager-2.24.0.orig/debian/gconf-defaults +++ gnome-power-manager-2.24.0/debian/gconf-defaults @@ -0,0 +1,7 @@ +/apps/gnome-power-manager/ui/icon_policy charge +/apps/gnome-power-manager/backlight/brightness_battery 70 +/apps/gnome-power-manager/timeout/sleep_computer_battery 0 +/apps/gnome-power-manager/buttons/lid_battery blank +/apps/gnome-power-manager/actions/sleep_type_battery nothing +/apps/gnome-power-manager/lock/use_screensaver_settings false +/apps/gnome-power-manager/lock/blank_screen false --- gnome-power-manager-2.24.0.orig/debian/control.in +++ gnome-power-manager-2.24.0/debian/control.in @@ -0,0 +1,56 @@ +Source: gnome-power-manager +Section: gnome +Priority: optional +Maintainer: Ted Gould +XSBC-Original-Maintainer: Debian GNOME Maintainers +Build-Depends: debhelper (>= 5), + cdbs, + autotools-dev, + libtool, + autoconf, + libgnomeui-dev, + libpanel-applet2-dev, + libglade2-dev, + libhal-dev (>= 0.5.8), + libdbus-1-dev (>= 0.71), + libdbus-glib-1-dev (>= 0.71), + libxml-parser-perl, + libxext-dev, + libx11-dev, + libgtk2.0-dev (>= 2.11), + libwnck-dev (>= 2.10), + docbook-to-man, + intltool, + libnotify-dev (>= 0.4.4-3), + docbook-utils, + libxres-dev, + xmlto, + gnome-doc-utils, + libpanel-applet2-dev, + libgnome-keyring-dev, + scrollkeeper, + gnome-pkg-tools (>= 0.10), + libgstreamer0.10-dev, + libxrandr-dev (>= 1.2.0), + libpolkit-gnome-dev (>= 0.8), + libpolkit-dbus-dev (>= 0.8), + libpolkit-grant-dev (>= 0.8) +Standards-Version: 3.7.3 +Vcs-Bzr: bzr+ssh://bazaar.launchpad.net/~ted-gould/gnome-power/ubuntu-packaging +Vcs-Browser: http://bazaar.launchpad.net/~ted-gould/gnome-power/ubuntu-packaging +Homepage: http://www.gnome.org/projects/gnome-power-manager/ + +Package: gnome-power-manager +Architecture: any +Depends: ${shlibs:Depends}, ${misc:Depends}, notification-daemon, hal (>= 0.5.10) +Description: frontend for gnome-powermanager + GNOME Power Manager is a session daemon for the GNOME + desktop environment that makes it easy to + manage your laptop or desktop system. + . + gnome-power-manager manages battery status, events, + powermanagement settings and actions like: + * Suspend to RAM + * Suspend to Disk (Hibernate) + * Shutdown + * Blank screen --- gnome-power-manager-2.24.0.orig/debian/rules +++ gnome-power-manager-2.24.0/debian/rules @@ -0,0 +1,38 @@ +#!/usr/bin/make -f + +include /usr/share/cdbs/1/rules/debhelper.mk +include /usr/share/cdbs/1/class/gnome.mk +include /usr/share/cdbs/1/rules/simple-patchsys.mk +include /usr/share/cdbs/1/rules/utils.mk +include /usr/share/gnome-pkg-tools/1/rules/uploaders.mk +-include /usr/share/gnome-pkg-tools/1/rules/gnome-get-source.mk + +DEB_AUTO_UPDATE_AUTOCONF = "yes" + +DEB_HOST_ARCH := $(shell dpkg-architecture -qDEB_HOST_ARCH) + +DEB_CONFIGURE_EXTRA_FLAGS += \ + --without-gconf-source \ + --enable-libnotify \ + --with-dpms-ext \ + --with-dbus-services=/usr/share/dbus-1/services/ \ + --disable-scrollkeeper \ + --with-doc-dir=/usr/share/doc/gnome-power-manager/ \ + --disable-policykit \ + --enable-applets + +clean:: + rm -f po/*.gmo + +binary-install/gnome-power-manager:: + rm -f debian/gnome-power-manager/usr/share/doc/gnome-power-manager/README.cvs + rm -rf debian/gnome-power-manager/etc/dbus/system.d + rm -f debian/gnome-power-manager/usr/share/applications/gnome-power-statistics.desktop + mkdir -p debian/gnome-power-manager/etc/xdg/autostart + mv debian/gnome-power-manager/usr/share/gnome/autostart/gnome-power-manager.desktop \ + debian/gnome-power-manager/etc/xdg/autostart/gnome-power-manager.desktop + +install/gnome-power-manager:: + mkdir -p debian/gnome-power-manager/usr/share/gconf/defaults + cp debian/gconf-defaults debian/gnome-power-manager/usr/share/gconf/defaults/10_gnome-power-manager + --- gnome-power-manager-2.24.0.orig/debian/control +++ gnome-power-manager-2.24.0/debian/control @@ -0,0 +1,56 @@ +Source: gnome-power-manager +Section: gnome +Priority: optional +Maintainer: Ted Gould +XSBC-Original-Maintainer: Debian GNOME Maintainers +Build-Depends: debhelper (>= 5), + cdbs, + autotools-dev, + libtool, + autoconf, + libgnomeui-dev, + libpanel-applet2-dev, + libglade2-dev, + libhal-dev (>= 0.5.8), + libdbus-1-dev (>= 0.71), + libdbus-glib-1-dev (>= 0.71), + libxml-parser-perl, + libxext-dev, + libx11-dev, + libgtk2.0-dev (>= 2.11), + libwnck-dev (>= 2.10), + docbook-to-man, + intltool, + libnotify-dev (>= 0.4.4-3), + docbook-utils, + libxres-dev, + xmlto, + gnome-doc-utils, + libpanel-applet2-dev, + libgnome-keyring-dev, + scrollkeeper, + gnome-pkg-tools (>= 0.10), + libgstreamer0.10-dev, + libxrandr-dev (>= 1.2.0), + libpolkit-gnome-dev (>= 0.8), + libpolkit-dbus-dev (>= 0.8), + libpolkit-grant-dev (>= 0.8) +Standards-Version: 3.7.3 +Vcs-Bzr: bzr+ssh://bazaar.launchpad.net/~ted-gould/gnome-power/ubuntu-packaging +Vcs-Browser: http://bazaar.launchpad.net/~ted-gould/gnome-power/ubuntu-packaging +Homepage: http://www.gnome.org/projects/gnome-power-manager/ + +Package: gnome-power-manager +Architecture: any +Depends: ${shlibs:Depends}, ${misc:Depends}, notification-daemon, hal (>= 0.5.10) +Description: frontend for gnome-powermanager + GNOME Power Manager is a session daemon for the GNOME + desktop environment that makes it easy to + manage your laptop or desktop system. + . + gnome-power-manager manages battery status, events, + powermanagement settings and actions like: + * Suspend to RAM + * Suspend to Disk (Hibernate) + * Shutdown + * Blank screen --- gnome-power-manager-2.24.0.orig/debian/patches/74-disable-quirks-reference.patch +++ gnome-power-manager-2.24.0/debian/patches/74-disable-quirks-reference.patch @@ -0,0 +1,28 @@ +diff -Nur gnome-power-manager-2.20.0/src/gpm-notify.c gnome-power-manager-2.20.0.new/src/gpm-notify.c +--- gnome-power-manager-2.20.0/src/gpm-notify.c 2007-08-03 18:13:36.000000000 +0100 ++++ gnome-power-manager-2.20.0.new/src/gpm-notify.c 2007-09-30 20:51:55.000000000 +0100 +@@ -581,7 +581,7 @@ + _("Do not show me this again"), + (NotifyActionCallback) notify_general_clicked_cb, + notify, NULL); +- ++#if 0 + notify->priv->internet_url = g_strdup (QUIRK_WEBSITE); + /* Translator: Quirks refer to strange/weird/undocumented behaviour of + * hardware. Because the manufacturers do not provide the necessary +@@ -589,12 +589,14 @@ + * supply the info by following the procedures outlined in the "Quirks + * website" at http://people.freedesktop.org/~hughsient/quirk/. + */ ++ + notify_notification_add_action (notify->priv->libnotify, + "visit-website", + _("Visit quirk website"), + (NotifyActionCallback) notify_general_clicked_cb, + notify, NULL); +-#endif ++#endif /* #if 0 */ ++#endif /* #ifdef HAVE_LIBNOTIFY */ + + gpm_notify_show (notify); + return TRUE; --- gnome-power-manager-2.24.0.orig/debian/patches/03-system-policy.patch +++ gnome-power-manager-2.24.0/debian/patches/03-system-policy.patch @@ -0,0 +1,32 @@ +diff -urN gnome-power-manager-2.24.0/src/gpm-main.c gnome-power-manager-ted/src/gpm-main.c +--- gnome-power-manager-2.24.0/src/gpm-main.c 2008-09-04 05:05:15.000000000 -0500 ++++ gnome-power-manager-ted/src/gpm-main.c 2008-09-23 09:39:25.000000000 -0500 +@@ -144,6 +144,7 @@ + GError *error = NULL; + GOptionContext *context; + GnomeProgram *program; ++ gint ret; + + const GOptionEntry options[] = { + { "no-daemon", '\0', 0, G_OPTION_ARG_NONE, &no_daemon, +@@ -243,6 +244,20 @@ + + loop = g_main_loop_new (NULL, FALSE); + ++ ret = dbus_bus_request_name(dbus_g_connection_get_connection(system_connection), ++ "org.freedesktop.Policy.Power", ++ DBUS_NAME_FLAG_REPLACE_EXISTING, NULL); ++ switch (ret) { ++ case DBUS_REQUEST_NAME_REPLY_PRIMARY_OWNER: ++ egg_debug("Successfully acquired interface org.freedesktop.Policy.Power."); ++ break; ++ case DBUS_REQUEST_NAME_REPLY_IN_QUEUE: ++ printf("Queued for interface org.freedesktop.Policy.Power."); ++ break; ++ default: ++ break; ++ }; ++ + /* Only timeout and close the mainloop if we have specified it + * on the command line */ + if (timed_exit) { --- gnome-power-manager-2.24.0.orig/debian/patches/70-suppress-pm-actions-on-ltsp.patch +++ gnome-power-manager-2.24.0/debian/patches/70-suppress-pm-actions-on-ltsp.patch @@ -0,0 +1,25 @@ +diff -Nur gnome-power-manager-2.19.3/libhal-glib/libhal-gpower.c gnome-power-manager-2.19.3.new/libhal-glib/libhal-gpower.c +--- gnome-power-manager-2.19.3/libhal-glib/libhal-gpower.c 2007-03-29 16:05:00.000000000 +0200 ++++ gnome-power-manager-2.19.3.new/libhal-glib/libhal-gpower.c 2007-06-16 10:31:46.000000000 +0200 +@@ -162,8 +162,8 @@ + exists = hal_gdevice_get_bool (power->priv->computer, + "power_management.can_suspend", + &can_suspend, NULL); +- if (exists == FALSE) { +- g_warning ("Key can_suspend missing"); ++ if (exists == FALSE || g_getenv("LTSP_CLIENT")) { ++ g_warning ("Key can_suspend missing or running on Thin Client"); + return FALSE; + } + return can_suspend; +@@ -189,8 +189,8 @@ + exists = hal_gdevice_get_bool (power->priv->computer, + "power_management.can_hibernate", + &can_hibernate, NULL); +- if (exists == FALSE) { +- g_warning ("Key can_hibernate missing"); ++ if (exists == FALSE || g_getenv("LTSP_CLIENT")) { ++ g_warning ("Key can_hibernate missing or running on Thin Client"); + return FALSE; + } + return can_hibernate; --- gnome-power-manager-2.24.0.orig/debian/patches/17_icon_cache.patch +++ gnome-power-manager-2.24.0/debian/patches/17_icon_cache.patch @@ -0,0 +1,23 @@ +diff -ur gnome-power-manager-2.23.91/data/icons/Makefile.am gnome-power-manager-ted/data/icons/Makefile.am +--- gnome-power-manager-2.23.91/data/icons/Makefile.am 2008-07-27 05:05:25.000000000 -0500 ++++ gnome-power-manager-ted/data/icons/Makefile.am 2008-09-03 21:18:35.000000000 -0500 +@@ -1,6 +1,6 @@ + SUBDIRS = scalable 16x16 22x22 24x24 48x48 + +-gtk_update_icon_cache = gtk-update-icon-cache -f -t $(datadir)/icons/hicolor ++gtk_update_icon_cache = gtk-update-icon-cache -f -t $(pkgdatadir)/icons/hicolor + + install-data-hook: update-icon-cache + uninstall-hook: update-icon-cache +diff -ur gnome-power-manager-2.23.91/data/icons/Makefile.in gnome-power-manager-ted/data/icons/Makefile.in +--- gnome-power-manager-2.23.91/data/icons/Makefile.in 2008-09-01 08:39:59.000000000 -0500 ++++ gnome-power-manager-ted/data/icons/Makefile.in 2008-09-03 21:18:55.000000000 -0500 +@@ -267,7 +267,7 @@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + SUBDIRS = scalable 16x16 22x22 24x24 48x48 +-gtk_update_icon_cache = gtk-update-icon-cache -f -t $(datadir)/icons/hicolor ++gtk_update_icon_cache = gtk-update-icon-cache -f -t $(pkgdatadir)/icons/hicolor + all: all-recursive + + .SUFFIXES: --- gnome-power-manager-2.24.0.orig/debian/patches/77-hal-brightness-in-hardware.patch +++ gnome-power-manager-2.24.0/debian/patches/77-hal-brightness-in-hardware.patch @@ -0,0 +1,22 @@ +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/src/gpm-brightness-hal.c gnome-power-manager-2.24.0.new/src/gpm-brightness-hal.c +--- gnome-power-manager-2.24.0/src/gpm-brightness-hal.c 2008-12-01 13:54:40.000000000 -0500 ++++ gnome-power-manager-2.24.0.new/src/gpm-brightness-hal.c 2008-12-01 13:54:42.000000000 -0500 +@@ -322,6 +322,7 @@ + if (current_hw != brightness->priv->last_set_hw || + brightness->priv->does_own_updates) { + brightness->priv->last_set_hw = current_hw; ++ ret = TRUE; + } else { + /* macbook pro has a bazzillion brightness levels, be a bit clever */ + step = gpm_brightness_get_step (brightness->priv->levels); +@@ -364,7 +365,8 @@ + /* the panel has been updated in firmware */ + if (current_hw != brightness->priv->last_set_hw || + brightness->priv->does_own_updates) { +- gpm_brightness_hal_get_hw (brightness, &brightness->priv->last_set_hw); ++ brightness->priv->last_set_hw = current_hw; ++ ret = TRUE; + } else { + /* macbook pro has a bazzillion brightness levels, be a bit clever */ + step = gpm_brightness_get_step (brightness->priv->levels); + --- gnome-power-manager-2.24.0.orig/debian/patches/13_bugreport_bin_sh.patch +++ gnome-power-manager-2.24.0/debian/patches/13_bugreport_bin_sh.patch @@ -0,0 +1,8 @@ +diff -ur gnome-power-manager-2.23.1/tools/gnome-power-bugreport.sh gnome-power-manager-ted/tools/gnome-power-bugreport.sh +--- gnome-power-manager-2.23.1/tools/gnome-power-bugreport.sh 2008-04-08 00:31:38.000000000 -0700 ++++ gnome-power-manager-ted/tools/gnome-power-bugreport.sh 2008-06-16 12:56:03.000000000 -0700 +@@ -1,3 +1,4 @@ ++#!/bin/sh + # Copyright (C) 2006-2007 Richard Hughes + # + # Licensed under the GNU General Public License Version 2 --- gnome-power-manager-2.24.0.orig/debian/patches/21_idle_key_removal.patch +++ gnome-power-manager-2.24.0/debian/patches/21_idle_key_removal.patch @@ -0,0 +1,38 @@ +diff -ur gnome-power-manager-2.24.0/src/gpm-button.c gnome-power-manager-ted/src/gpm-button.c +--- gnome-power-manager-2.24.0/src/gpm-button.c 2008-09-04 05:05:15.000000000 -0500 ++++ gnome-power-manager-ted/src/gpm-button.c 2008-10-02 13:27:57.000000000 -0500 +@@ -62,6 +62,14 @@ + + static guint signals [LAST_SIGNAL] = { 0 }; + static gpointer gpm_button_object = NULL; ++static gboolean had_idle = TRUE; ++ ++/* An idle function that when it runs removes itself from the ++ * queue and marks the had_idle flag to TRUE */ ++gboolean gpm_button_has_idle (gpointer data) { ++ had_idle = TRUE; ++ return FALSE; /* Remove from queue */ ++} + + G_DEFINE_TYPE (GpmButton, gpm_button, G_TYPE_OBJECT) + +@@ -80,6 +88,19 @@ + return GDK_FILTER_CONTINUE; + } + ++ /* Remove X events that happen so quickly that we don't have any ++ * time to go back to the idle section of the main loop. In reality ++ * this should never happen in a standard case, only in the case of ++ * quickly repeated keys from the X server */ ++ if (!had_idle) { ++ /* swallow key */ ++ return GDK_FILTER_REMOVE; ++ } ++ /* Signal that we've not had an idle since the last keypress (this one) */ ++ had_idle = FALSE; ++ /* set up idle func to find idle */ ++ g_idle_add(gpm_button_has_idle, NULL); ++ + keycode = xev->xkey.keycode; + + /* is the key string already in our DB? */ --- gnome-power-manager-2.24.0.orig/debian/patches/22_xfce_desktop_files.patch +++ gnome-power-manager-2.24.0/debian/patches/22_xfce_desktop_files.patch @@ -0,0 +1,48 @@ +diff -ur gnome-power-manager-2.24.0/data/gnome-power-preferences.desktop.in gnome-power-manager-ted/data/gnome-power-preferences.desktop.in +--- gnome-power-manager-2.24.0/data/gnome-power-preferences.desktop.in 2008-09-22 15:46:23.000000000 -0500 ++++ gnome-power-manager-ted/data/gnome-power-preferences.desktop.in 2008-10-03 09:09:03.000000000 -0500 +@@ -7,7 +7,7 @@ + Terminal=false + Type=Application + Categories=Settings;X-GNOME-SystemSettings; +-OnlyShowIn=GNOME; ++OnlyShowIn=GNOME;XFCE; + StartupNotify=true + X-GNOME-Bugzilla-Bugzilla=GNOME + X-GNOME-Bugzilla-Product=gnome-power-manager +diff -ur gnome-power-manager-2.24.0/data/gnome-power-preferences.desktop.in.in gnome-power-manager-ted/data/gnome-power-preferences.desktop.in.in +--- gnome-power-manager-2.24.0/data/gnome-power-preferences.desktop.in.in 2008-09-04 05:05:18.000000000 -0500 ++++ gnome-power-manager-ted/data/gnome-power-preferences.desktop.in.in 2008-10-03 09:09:12.000000000 -0500 +@@ -7,7 +7,7 @@ + Terminal=false + Type=Application + Categories=Settings;X-GNOME-SystemSettings; +-OnlyShowIn=GNOME; ++OnlyShowIn=GNOME;XFCE; + StartupNotify=true + X-GNOME-Bugzilla-Bugzilla=GNOME + X-GNOME-Bugzilla-Product=gnome-power-manager +diff -ur gnome-power-manager-2.24.0/data/gnome-power-statistics.desktop.in gnome-power-manager-ted/data/gnome-power-statistics.desktop.in +--- gnome-power-manager-2.24.0/data/gnome-power-statistics.desktop.in 2008-09-22 15:46:23.000000000 -0500 ++++ gnome-power-manager-ted/data/gnome-power-statistics.desktop.in 2008-10-03 09:09:18.000000000 -0500 +@@ -7,7 +7,7 @@ + Terminal=false + Type=Application + Categories=GNOME;GTK;System;X-Red-Hat-Base; +-OnlyShowIn=GNOME; ++OnlyShowIn=GNOME;XFCE; + StartupNotify=true + X-GNOME-Bugzilla-Bugzilla=GNOME + X-GNOME-Bugzilla-Product=gnome-power-manager +diff -ur gnome-power-manager-2.24.0/data/gnome-power-statistics.desktop.in.in gnome-power-manager-ted/data/gnome-power-statistics.desktop.in.in +--- gnome-power-manager-2.24.0/data/gnome-power-statistics.desktop.in.in 2008-09-04 05:05:18.000000000 -0500 ++++ gnome-power-manager-ted/data/gnome-power-statistics.desktop.in.in 2008-10-03 09:09:27.000000000 -0500 +@@ -7,7 +7,7 @@ + Terminal=false + Type=Application + Categories=GNOME;GTK;System;X-Red-Hat-Base; +-OnlyShowIn=GNOME; ++OnlyShowIn=GNOME;XFCE; + StartupNotify=true + X-GNOME-Bugzilla-Bugzilla=GNOME + X-GNOME-Bugzilla-Product=gnome-power-manager --- gnome-power-manager-2.24.0.orig/debian/patches/12_warning_gconf_update.patch +++ gnome-power-manager-2.24.0/debian/patches/12_warning_gconf_update.patch @@ -0,0 +1,39 @@ +Only in gnome-power-manager-ted/src: .gpm-manager.c.swp +Only in gnome-power-manager-ted/src: .gpm-profile.c.swp +diff -ur gnome-power-manager-2.22.1/src/gpm-warnings.c gnome-power-manager-ted/src/gpm-warnings.c +--- gnome-power-manager-2.22.1/src/gpm-warnings.c 2008-03-10 14:49:46.000000000 -0700 ++++ gnome-power-manager-ted/src/gpm-warnings.c 2008-04-30 13:30:36.000000000 -0700 +@@ -216,7 +216,33 @@ + gpm_conf_get_bool (warnings->priv->conf, + GPM_CONF_USE_TIME_POLICY, + &warnings->priv->use_time_primary); ++ } else if (strcmp (key, GPM_CONF_THRESH_PERCENTAGE_LOW) == 0) { ++ gpm_conf_get_uint (warnings->priv->conf, ++ GPM_CONF_THRESH_PERCENTAGE_LOW, ++ &warnings->priv->low_percentage); ++ } else if (strcmp (key, GPM_CONF_THRESH_PERCENTAGE_CRITICAL) == 0) { ++ gpm_conf_get_uint (warnings->priv->conf, ++ GPM_CONF_THRESH_PERCENTAGE_CRITICAL, ++ &warnings->priv->critical_percentage); ++ } else if (strcmp (key, GPM_CONF_THRESH_PERCENTAGE_ACTION) == 0) { ++ gpm_conf_get_uint (warnings->priv->conf, ++ GPM_CONF_THRESH_PERCENTAGE_ACTION, ++ &warnings->priv->action_percentage); ++ } else if (strcmp (key, GPM_CONF_THRESH_TIME_LOW) == 0) { ++ gpm_conf_get_uint (warnings->priv->conf, ++ GPM_CONF_THRESH_TIME_LOW, ++ &warnings->priv->low_time); ++ } else if (strcmp (key, GPM_CONF_THRESH_TIME_CRITICAL) == 0) { ++ gpm_conf_get_uint (warnings->priv->conf, ++ GPM_CONF_THRESH_TIME_CRITICAL, ++ &warnings->priv->critical_time); ++ } else if (strcmp (key, GPM_CONF_THRESH_TIME_ACTION) == 0) { ++ gpm_conf_get_uint (warnings->priv->conf, ++ GPM_CONF_THRESH_TIME_ACTION, ++ &warnings->priv->action_time); + } ++ ++ return; + } + + /** --- gnome-power-manager-2.24.0.orig/debian/patches/14_inhibit_tool.patch +++ gnome-power-manager-2.24.0/debian/patches/14_inhibit_tool.patch @@ -0,0 +1,71 @@ +diff -urN gnome-power-manager-2.23.91/tools/gnome-power-manager-inhibit gnome-power-manager-ted/tools/gnome-power-manager-inhibit +--- gnome-power-manager-2.23.91/tools/gnome-power-manager-inhibit 1969-12-31 18:00:00.000000000 -0600 ++++ gnome-power-manager-ted/tools/gnome-power-manager-inhibit 2008-09-03 21:41:38.000000000 -0500 +@@ -0,0 +1,47 @@ ++#!/usr/bin/python ++ ++# Copyright (C) 2008 Canonical Ltd ++# ++# This program is free software; you can redistribute it and/or modify ++# it under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 3 of the License, or ++# (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ ++import dbus ++import time ++import os ++import sys ++ ++if len(sys.argv) < 2: ++ print "Must be called with a command" ++ exit(1) ++ ++session_bus = dbus.SessionBus() ++ ++if session_bus: ++ gpm = session_bus.get_object('org.freedesktop.PowerManagement', ++ '/org/freedesktop/PowerManagement/Inhibit') ++if gpm: ++ cookie = gpm.Inhibit("Command Line: " + sys.argv[1], "Long Execution") ++else: ++ sys.stderr.write(sys.argv[0] + ": Unable to inhibit, executing command anyway\n") ++ ++retval = 0 ++try: ++ retval = os.spawnvp(os.P_WAIT, sys.argv[1], sys.argv[1:]) ++except KeyboardInterrupt: ++ x = 5 ++finally: ++ if gpm and cookie: ++ gpm.UnInhibit(cookie) ++ ++exit(retval) +diff -urN gnome-power-manager-2.23.91/tools/Makefile.am gnome-power-manager-ted/tools/Makefile.am +--- gnome-power-manager-2.23.91/tools/Makefile.am 2007-07-01 15:29:15.000000000 -0500 ++++ gnome-power-manager-ted/tools/Makefile.am 2008-09-03 21:41:22.000000000 -0500 +@@ -1,4 +1,5 @@ + script_SCRIPTS = \ ++ gnome-power-manager-inhibit \ + gnome-power-cmd.sh \ + gnome-power-bugreport.sh + +diff -urN gnome-power-manager-2.23.91/tools/Makefile.in gnome-power-manager-ted/tools/Makefile.in +--- gnome-power-manager-2.23.91/tools/Makefile.in 2008-09-01 08:40:00.000000000 -0500 ++++ gnome-power-manager-ted/tools/Makefile.in 2008-09-03 21:41:22.000000000 -0500 +@@ -259,6 +259,7 @@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + script_SCRIPTS = \ ++ gnome-power-manager-inhibit \ + gnome-power-cmd.sh \ + gnome-power-bugreport.sh + --- gnome-power-manager-2.24.0.orig/debian/patches/09_lid_always_blanks.patch +++ gnome-power-manager-2.24.0/debian/patches/09_lid_always_blanks.patch @@ -0,0 +1,129 @@ +diff -urN gnome-power-manager-2.24.0/src/gpm-manager.c gnome-power-manager-ted/src/gpm-manager.c +--- gnome-power-manager-2.24.0/src/gpm-manager.c 2008-09-04 05:05:15.000000000 -0500 ++++ gnome-power-manager-ted/src/gpm-manager.c 2008-09-22 23:26:21.000000000 -0500 +@@ -426,19 +426,61 @@ + const gchar *reason) + { + gchar *action = NULL; ++ gboolean has_inhibit = FALSE; + +- /* are we inhibited? */ +- if (gpm_manager_is_inhibit_valid (manager, FALSE, "policy action") == FALSE) { ++ if (policy == NULL) { ++ egg_debug ("No policy provided, aborting action."); + return FALSE; + } + +- egg_debug ("policy: %s", policy); + gpm_conf_get_string (manager->priv->conf, policy, &action); +- + if (action == NULL) { ++ egg_debug ("Policy %s returned NULL action, aborting policy action.", policy); + return FALSE; + } + ++ /* If we're inhibited, figure out what we're being asked to do. If ++ it's blank on a lid close, that's cool. If it's suspend or hibernate ++ on a lid close we should blank instead. */ ++ gpm_inhibit_has_inhibit (manager->priv->inhibit, &has_inhibit, NULL); ++ if (has_inhibit == TRUE) { ++ // Everything in here is checking to see if has_inhibit should be FALSE ++ if (strcmp(policy, GPM_CONF_BUTTON_LID_BATT) == 0 || ++ strcmp(policy, GPM_CONF_BUTTON_LID_AC) == 0) { ++ if (strcmp (action, ACTION_BLANK) == 0) { ++ // Just blank it no matter what ++ has_inhibit = FALSE; ++ egg_debug ("Inhibited ignored for screen blanking on lid event."); ++ } else if ((strcmp (action, ACTION_SUSPEND) == 0) || ++ (strcmp (action, ACTION_HIBERNATE) == 0)) { ++ g_free (action); ++ action = g_strdup(ACTION_BLANK); ++ has_inhibit = FALSE; ++ egg_debug ("Adjusting lid action to blank as we're inhibited."); ++ } ++ } ++ /* If we're on critical battery user apps can't stop us, sorry guys ++ it's time to save possible data loss vs. playing music with the ++ lid closed. */ ++ if (strcmp(policy, GPM_CONF_ACTIONS_CRITICAL_BATT) == 0) { ++ has_inhibit = FALSE; ++ } ++ /* We really shouldn't inhibit nothing. (and if you send that sentence ++ to my high school English teacher I'll hunt you down) */ ++ if (strcmp (action, ACTION_NOTHING) == 0) { ++ has_inhibit = FALSE; ++ } ++ } ++ ++ /* Okay, we're really going to inhibit this thing. Pop a warning */ ++ if (has_inhibit == TRUE) { ++ gpm_manager_is_inhibit_valid (manager, FALSE, "policy action"); ++ g_free(action); ++ return FALSE; ++ } ++ ++ egg_debug ("policy: %s", policy); ++ + if (strcmp (action, ACTION_NOTHING) == 0) { + gpm_info_explain_reason (manager->priv->info, GPM_EVENT_NOTIFICATION, + _("Doing nothing."), reason); +@@ -898,11 +940,6 @@ + gboolean pressed) + { + gboolean on_ac; +- gboolean has_inhibit; +- gboolean do_policy; +- gchar *action; +- +- on_ac = gpm_ac_adapter_is_present (manager->priv->ac_adapter); + + if (pressed == FALSE) { + /* we turn the lid dpms back on unconditionally */ +@@ -910,40 +947,19 @@ + return; + } + ++ on_ac = gpm_ac_adapter_is_present (manager->priv->ac_adapter); ++ + if (on_ac) { + egg_debug ("Performing AC policy"); + manager_policy_do (manager, GPM_CONF_BUTTON_LID_AC, + _("The lid has been closed on ac power.")); +- return; +- } +- +- /* default */ +- do_policy = TRUE; +- +- /* are we inhibited? */ +- gpm_inhibit_has_inhibit (manager->priv->inhibit, &has_inhibit, NULL); +- +- /* do not do lid close action if suspend (or hibernate) */ +- if (has_inhibit) { +- /* get the policy action for battery */ +- gpm_conf_get_string (manager->priv->conf, GPM_CONF_BUTTON_LID_BATT, &action); +- +- /* if we are trying to suspend or hibernate then don't do action */ +- if ((strcmp (action, ACTION_SUSPEND) == 0) || +- (strcmp (action, ACTION_HIBERNATE) == 0)) { +- do_policy = FALSE; +- } +- g_free (action); +- } +- +- if (do_policy == FALSE) { +- egg_debug ("Not doing lid policy action as inhibited as set to sleep"); +- return; ++ } else { ++ egg_debug ("Performing battery policy"); ++ manager_policy_do (manager, GPM_CONF_BUTTON_LID_BATT, ++ _("The lid has been closed on battery power.")); + } + +- egg_debug ("Performing battery policy"); +- manager_policy_do (manager, GPM_CONF_BUTTON_LID_BATT, +- _("The lid has been closed on battery power.")); ++ return; + } + + /** --- gnome-power-manager-2.24.0.orig/debian/patches/24_interactive_shutdown_dbus.patch +++ gnome-power-manager-2.24.0/debian/patches/24_interactive_shutdown_dbus.patch @@ -0,0 +1,66 @@ +diff -ur gnome-power-manager-2.24.0/src/gpm-manager.c gnome-power-manager-ted/src/gpm-manager.c +--- gnome-power-manager-2.24.0/src/gpm-manager.c 2008-09-04 05:05:15.000000000 -0500 ++++ gnome-power-manager-ted/src/gpm-manager.c 2008-10-02 12:49:09.000000000 -0500 +@@ -413,6 +413,46 @@ + } + + /** ++ * gpm_manager_action_interactive: ++ * @manager: this class instance ++ **/ ++static gboolean ++gpm_manager_action_interactive (GpmManager *manager) ++{ ++ DBusGConnection *connection; ++ DBusGProxy *proxy; ++ GError *error = NULL; ++ ++ connection = dbus_g_bus_get (DBUS_BUS_SESSION, &error); ++ if (connection == NULL) { ++ if (error) { ++ egg_warning ("Couldn't connect to DBus session bus: %s", ++ error->message); ++ g_error_free (error); ++ } ++ return FALSE; ++ } ++ ++ proxy = dbus_g_proxy_new_for_name_owner (connection, ++ "org.gnome.SessionManager", ++ "/org/gnome/SessionManager", ++ "org.gnome.SessionManager", NULL); ++ if (proxy == NULL) { ++ egg_warning ("Unable to connect to Session manager over DBus."); ++ return FALSE; ++ } ++ ++ dbus_g_proxy_call_no_reply (proxy, "Shutdown", ++ G_TYPE_INVALID, ++ G_TYPE_INVALID); ++ g_object_unref (proxy); ++ ++ egg_debug("Sent Shutdown message to GNOME Session Manager -- we now have no visibility"); ++ ++ return TRUE; ++} ++ ++/** + * manager_policy_do: + * @manager: This class instance + * @policy: The policy that we should do, e.g. "suspend" +@@ -460,9 +500,12 @@ + } else if (strcmp (action, ACTION_INTERACTIVE) == 0) { + gpm_info_explain_reason (manager->priv->info, GPM_EVENT_NOTIFICATION, + _("GNOME interactive logout."), reason); +- gnome_client_request_save (gnome_master_client (), +- GNOME_SAVE_GLOBAL, +- TRUE, GNOME_INTERACT_ANY, FALSE, TRUE); ++ if (gpm_manager_action_interactive (manager) == FALSE) { ++ egg_warning ("Couldn't ask for interactive dialog from session manager over DBus, trying XSMP"); ++ gnome_client_request_save (gnome_master_client (), ++ GNOME_SAVE_GLOBAL, ++ TRUE, GNOME_INTERACT_ANY, FALSE, TRUE); ++ } + } else { + egg_warning ("unknown action %s", action); + } --- gnome-power-manager-2.24.0.orig/debian/patches/18_policy_action_fallback.patch +++ gnome-power-manager-2.24.0/debian/patches/18_policy_action_fallback.patch @@ -0,0 +1,132 @@ +diff -urN gnome-power-manager-2.24.0/src/gpm-cell-array.c gnome-power-manager-ted/src/gpm-cell-array.c +--- gnome-power-manager-2.24.0/src/gpm-cell-array.c 2008-09-09 02:23:05.000000000 -0500 ++++ gnome-power-manager-ted/src/gpm-cell-array.c 2008-09-22 23:35:05.000000000 -0500 +@@ -489,21 +489,12 @@ + gpm_cell_array_emit_system_action (GpmCellArray *cell_array, + GpmWarningsState warnings_state) + { +- gfloat accuracy; + GpmCellUnit *unit; + + g_return_val_if_fail (GPM_IS_CELL_ARRAY (cell_array), FALSE); + +- /* do we trust the profile enough to make a decision? */ ++ /* array */ + unit = &(cell_array->priv->unit); +- if (unit->kind == GPM_CELL_UNIT_KIND_PRIMARY) { +- accuracy = gpm_profile_get_accuracy_average (cell_array->priv->profile, +- unit->is_discharging); +- if (accuracy < GPM_PROFILE_GOOD_TRUST) { +- egg_debug ("profile is not accurate. Not doing policy action"); +- return FALSE; +- } +- } + + /* we are not primary, or we are primary with a trusted profile */ + if (warnings_state == GPM_WARNINGS_ACTION) { +@@ -530,6 +521,7 @@ + { + GpmWarningsState warnings_state; + GpmCellUnit *unit; ++ gfloat accuracy; + + g_return_if_fail (GPM_IS_CELL_ARRAY (cell_array)); + +@@ -556,6 +548,12 @@ + cell_array->priv->done_fully_charged = FALSE; + } + ++ /* do we trust the profile enough to make a decision based on time? */ ++ if (unit->kind == GPM_CELL_UNIT_KIND_PRIMARY) { ++ accuracy = gpm_profile_get_accuracy_average (cell_array->priv->profile, unit->is_discharging); ++ gpm_warnings_time_is_accurate (cell_array->priv->warnings, (accuracy > GPM_PROFILE_GOOD_TRUST)); ++ } ++ + /* only get a warning state if we are discharging */ + if (unit->is_discharging) { + warnings_state = gpm_warnings_get_state (cell_array->priv->warnings, unit); +diff -urN gnome-power-manager-2.24.0/src/gpm-warnings.c gnome-power-manager-ted/src/gpm-warnings.c +--- gnome-power-manager-2.24.0/src/gpm-warnings.c 2008-09-04 05:05:15.000000000 -0500 ++++ gnome-power-manager-ted/src/gpm-warnings.c 2008-09-22 23:37:05.000000000 -0500 +@@ -50,6 +50,7 @@ + { + GpmConf *conf; + gboolean use_time_primary; ++ gboolean time_is_accurate; + + guint low_percentage; + guint critical_percentage; +@@ -64,6 +65,21 @@ + + static gpointer gpm_warnings_object = NULL; + ++/** ++ * gpm_warnings_time_is_accurate: ++ * @warnings: This class instance ++ * @time_accurate: If the time remaining is accurate, and should be used for a policy action ++ * ++ * Return value: %TRUE if set ++ **/ ++void ++gpm_warnings_time_is_accurate (GpmWarnings *warnings, gboolean time_accurate) ++{ ++ g_return_if_fail (GPM_IS_WARNINGS (warnings)); ++ egg_debug ("time accurate is %i", time_accurate); ++ warnings->priv->time_is_accurate = time_accurate; ++} ++ + static GpmWarningsState + gpm_warnings_get_state_csr (GpmWarnings *warnings, + GpmCellUnit *unit) +@@ -150,15 +166,13 @@ + + type = gpm_warnings_get_state_percentage (warnings, unit); + +- } else if (unit->kind == GPM_CELL_UNIT_KIND_PRIMARY && +- warnings->priv->use_time_primary) { +- +- type = gpm_warnings_get_state_time (warnings, unit); +- +- } else if (unit->kind == GPM_CELL_UNIT_KIND_PRIMARY && +- warnings->priv->use_time_primary == FALSE) { +- +- type = gpm_warnings_get_state_percentage (warnings, unit); ++ } else if (unit->kind == GPM_CELL_UNIT_KIND_PRIMARY) { ++ /* only use the time when it is accurate, and GConf is not disabled */ ++ if (warnings->priv->time_is_accurate && ++ warnings->priv->use_time_primary) ++ type = gpm_warnings_get_state_time (warnings, unit); ++ else ++ type = gpm_warnings_get_state_percentage (warnings, unit); + } + + /* If we have no important warningss, we should test for discharging */ +@@ -228,6 +242,7 @@ + { + warnings->priv = GPM_WARNINGS_GET_PRIVATE (warnings); + ++ warnings->priv->time_is_accurate = TRUE; + warnings->priv->conf = gpm_conf_new (); + g_signal_connect (warnings->priv->conf, "value-changed", + G_CALLBACK (gconf_key_changed_cb), warnings); +diff -urN gnome-power-manager-2.24.0/src/gpm-warnings.h gnome-power-manager-ted/src/gpm-warnings.h +--- gnome-power-manager-2.24.0/src/gpm-warnings.h 2008-09-04 05:05:15.000000000 -0500 ++++ gnome-power-manager-ted/src/gpm-warnings.h 2008-09-22 23:29:35.000000000 -0500 +@@ -56,11 +56,13 @@ + GObjectClass parent_class; + } GpmWarningsClass; + +-GType gpm_warnings_get_type (void); +-GpmWarnings *gpm_warnings_new (void); ++GType gpm_warnings_get_type (void); ++GpmWarnings *gpm_warnings_new (void); + +-GpmWarningsState gpm_warnings_get_state (GpmWarnings *warnings, +- GpmCellUnit *unit); ++GpmWarningsState gpm_warnings_get_state (GpmWarnings *warnings, ++ GpmCellUnit *unit); ++void gpm_warnings_time_is_accurate (GpmWarnings *warnings, ++ gboolean time_accurate); + + G_END_DECLS + --- gnome-power-manager-2.24.0.orig/debian/patches/75_disable_Werror.patch +++ gnome-power-manager-2.24.0/debian/patches/75_disable_Werror.patch @@ -0,0 +1,12 @@ +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/configure.ac gnome-power-manager-2.24.0.new/configure.ac +--- gnome-power-manager-2.24.0/configure.ac 2008-09-22 22:45:17.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/configure.ac 2008-11-20 17:38:11.000000000 +0100 +@@ -22,7 +22,7 @@ + dnl - Extra verbose warning switches + dnl --------------------------------------------------------------------------- + if test "$GCC" = "yes"; then +- CPPFLAGS="$CPPFLAGS -Werror -Wcast-align -Wno-uninitialized" ++ CPPFLAGS="$CPPFLAGS -Wcast-align -Wno-uninitialized" + CPPFLAGS="$CPPFLAGS -Wall -Wformat-security" + fi + --- gnome-power-manager-2.24.0.orig/debian/patches/20_fix_percentage_closures.patch +++ gnome-power-manager-2.24.0/debian/patches/20_fix_percentage_closures.patch @@ -0,0 +1,30 @@ +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/src/gpm-cell-array.c gnome-power-manager-2.24.0.new/src/gpm-cell-array.c +--- gnome-power-manager-2.24.0/src/gpm-cell-array.c 2008-10-13 23:50:05.000000000 +0100 ++++ gnome-power-manager-2.24.0.new/src/gpm-cell-array.c 2008-10-13 23:51:35.000000000 +0100 +@@ -1366,7 +1366,7 @@ + G_SIGNAL_RUN_LAST, + G_STRUCT_OFFSET (GpmCellArrayClass, charge_action), + NULL, NULL, +- gpm_marshal_VOID__UINT, ++ g_cclosure_marshal_VOID__FLOAT, + G_TYPE_NONE, 1, G_TYPE_UINT); + signals [CHARGE_LOW] = + g_signal_new ("charge-low", +@@ -1374,7 +1374,7 @@ + G_SIGNAL_RUN_LAST, + G_STRUCT_OFFSET (GpmCellArrayClass, charge_low), + NULL, NULL, +- gpm_marshal_VOID__UINT, ++ g_cclosure_marshal_VOID__FLOAT, + G_TYPE_NONE, 1, G_TYPE_UINT); + signals [CHARGE_CRITICAL] = + g_signal_new ("charge-critical", +@@ -1382,7 +1382,7 @@ + G_SIGNAL_RUN_LAST, + G_STRUCT_OFFSET (GpmCellArrayClass, charge_critical), + NULL, NULL, +- gpm_marshal_VOID__UINT, ++ g_cclosure_marshal_VOID__FLOAT, + G_TYPE_NONE, 1, G_TYPE_UINT); + } + --- gnome-power-manager-2.24.0.orig/debian/patches/11_round_percentage.patch +++ gnome-power-manager-2.24.0/debian/patches/11_round_percentage.patch @@ -0,0 +1,29 @@ +diff -ur gnome-power-manager-2.23.1/src/gpm-common.c gnome-power-manager-ted/src/gpm-common.c +--- gnome-power-manager-2.23.1/src/gpm-common.c 2008-05-19 07:53:20.000000000 -0700 ++++ gnome-power-manager-ted/src/gpm-common.c 2008-06-16 12:39:16.000000000 -0700 +@@ -22,6 +22,7 @@ + #include "config.h" + + #include ++#include + #include + #include + #include +@@ -30,6 +31,8 @@ + #include "gpm-debug.h" + #include "gpm-common.h" + ++double round (double x); ++ + /** + * gpm_precision_round_up: + * @value: The input value +@@ -167,7 +170,7 @@ + gpm_warning ("levels is 0!"); + return 0; + } +- return ((gfloat) percentage * (gfloat) (levels - 1)) / 100.0f; ++ return (guint)((double)round(((double) percentage * (double) (levels - 1)) / 100.0f)); + } + + /** --- gnome-power-manager-2.24.0.orig/debian/patches/26_check_for_active_session.patch +++ gnome-power-manager-2.24.0/debian/patches/26_check_for_active_session.patch @@ -0,0 +1,57 @@ +diff -urp gnome-power-manager-2.24.0/src/gpm-button.c gnome-power-manager-ted/src/gpm-button.c +--- gnome-power-manager-2.24.0/src/gpm-button.c 2008-09-04 05:05:15.000000000 -0500 ++++ gnome-power-manager-ted/src/gpm-button.c 2008-10-15 16:43:22.000000000 -0500 +@@ -30,6 +30,10 @@ + #include + #include + ++#ifdef HAVE_POLKIT ++#include ++#endif ++ + #include + #include + #include +@@ -237,6 +241,29 @@ gpm_button_is_lid_closed (GpmButton *but + return button->priv->lid_is_closed; + } + ++#ifdef HAVE_POLKIT ++gboolean ++have_active_session (void) ++{ ++ PolKitSesion * pks = polkit_session_new(); ++ polkit_bool_t active; ++ ++ if (pks == NULL) { ++ egg_debug("Unable to get PolicyKit Session"); ++ return TRUE; ++ } ++ ++ if (!polkit_session_get_ck_is_active(pkg, &active)) { ++ polkit_session_unref(pks); ++ egg_debug("Unable to execute command to check if session is active."); ++ return TRUE; ++ } ++ ++ polkit_session_unref(pks); ++ return active; ++} ++#endif ++ + /** + * emit_button_pressed: + * +@@ -262,6 +289,12 @@ emit_button_pressed (GpmButton *button + gboolean state; + const char *atype; + ++#ifdef HAVE_POLKIT ++ if (!have_active_session()) { ++ return; ++ } ++#endif ++ + g_return_if_fail (device != NULL); + g_return_if_fail (details != NULL); + --- gnome-power-manager-2.24.0.orig/debian/patches/23_numlock_hotkey.patch +++ gnome-power-manager-2.24.0/debian/patches/23_numlock_hotkey.patch @@ -0,0 +1,12 @@ +diff -ur gnome-power-manager-2.24.0/src/gpm-button.c gnome-power-manager-bryce/src/gpm-button.c +--- gnome-power-manager-2.24.0/src/gpm-button.c 2008-09-04 06:05:15.000000000 -0400 ++++ gnome-power-manager-bryce/src/gpm-button.c 2008-10-11 09:39:48.000000000 -0400 +@@ -115,7 +115,7 @@ + static gboolean + gpm_button_grab_keystring (GpmButton *button, guint64 keycode) + { +- guint modmask = 0; ++ guint modmask = AnyModifier; + Display *display; + gint ret; + --- gnome-power-manager-2.24.0.orig/debian/patches/25_sparc_char_to_int.patch +++ gnome-power-manager-2.24.0/debian/patches/25_sparc_char_to_int.patch @@ -0,0 +1,27 @@ +diff -ur gnome-power-manager-2.24.0/src/gpm-brightness-xrandr.c gnome-power-manager-ted/src/gpm-brightness-xrandr.c +--- gnome-power-manager-2.24.0/src/gpm-brightness-xrandr.c 2008-09-04 05:05:15.000000000 -0500 ++++ gnome-power-manager-ted/src/gpm-brightness-xrandr.c 2008-10-15 15:00:09.000000000 -0500 +@@ -86,7 +86,7 @@ + { + unsigned long nitems; + unsigned long bytes_after; +- unsigned char *prop; ++ guint *prop; + Atom actual_type; + int actual_format; + gboolean ret = FALSE; +@@ -96,12 +96,12 @@ + if (XRRGetOutputProperty (brightness->priv->dpy, output, brightness->priv->backlight, + 0, 4, False, False, None, + &actual_type, &actual_format, +- &nitems, &bytes_after, &prop) != Success) { ++ &nitems, &bytes_after, ((unsigned char **)&prop)) != Success) { + egg_debug ("failed to get property"); + return FALSE; + } + if (actual_type == XA_INTEGER && nitems == 1 && actual_format == 32) { +- *cur = *((int *) prop); ++ *cur = *prop; + ret = TRUE; + } + XFree (prop); --- gnome-power-manager-2.24.0.orig/debian/patches/76_autoreconf.patch +++ gnome-power-manager-2.24.0/debian/patches/76_autoreconf.patch @@ -0,0 +1,145127 @@ +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/aclocal.m4 gnome-power-manager-2.24.0.new/aclocal.m4 +--- gnome-power-manager-2.24.0/aclocal.m4 2008-09-22 22:46:07.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/aclocal.m4 2008-11-20 18:37:20.000000000 +0100 +@@ -1,7 +1,7 @@ +-# generated automatically by aclocal 1.10.1 -*- Autoconf -*- ++# generated automatically by aclocal 1.9.6 -*- Autoconf -*- + + # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +-# 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2005 Free Software Foundation, Inc. + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -11,14 +11,6 @@ + # even the implied warranty of MERCHANTABILITY or FITNESS FOR A + # PARTICULAR PURPOSE. + +-m4_ifndef([AC_AUTOCONF_VERSION], +- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +-m4_if(AC_AUTOCONF_VERSION, [2.61],, +-[m4_warning([this file was generated for autoconf 2.61. +-You have another version of autoconf. It may work, but is not guaranteed to. +-If you have problems, you may need to regenerate the build system entirely. +-To do so, use the procedure documented by the package, typically `autoreconf'.])]) +- + dnl AM_GCONF_SOURCE_2 + dnl Defines GCONF_SCHEMA_CONFIG_SOURCE which is where you should install schemas + dnl (i.e. pass to gconftool-2 +@@ -34,8 +26,10 @@ + GCONF_SCHEMA_CONFIG_SOURCE=$GCONF_SCHEMA_INSTALL_SOURCE + fi + +- AC_ARG_WITH(gconf-source, +- [ --with-gconf-source=sourceaddress Config database for installing schema files.],GCONF_SCHEMA_CONFIG_SOURCE="$withval",) ++ AC_ARG_WITH([gconf-source], ++ AC_HELP_STRING([--with-gconf-source=sourceaddress], ++ [Config database for installing schema files.]), ++ [GCONF_SCHEMA_CONFIG_SOURCE="$withval"],) + + AC_SUBST(GCONF_SCHEMA_CONFIG_SOURCE) + AC_MSG_RESULT([Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation]) +@@ -44,8 +38,10 @@ + GCONF_SCHEMA_FILE_DIR='$(sysconfdir)/gconf/schemas' + fi + +- AC_ARG_WITH(gconf-schema-file-dir, +- [ --with-gconf-schema-file-dir=dir Directory for installing schema files.],GCONF_SCHEMA_FILE_DIR="$withval",) ++ AC_ARG_WITH([gconf-schema-file-dir], ++ AC_HELP_STRING([--with-gconf-schema-file-dir=dir], ++ [Directory for installing schema files.]), ++ [GCONF_SCHEMA_FILE_DIR="$withval"],) + + AC_SUBST(GCONF_SCHEMA_FILE_DIR) + AC_MSG_RESULT([Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files]) +@@ -451,6755 +447,187 @@ + [glib_REQUIRE([GLIB_GNU_GETTEXT])dnl + glib_save_prefix="$prefix" + glib_save_exec_prefix="$exec_prefix" +-glib_save_datarootdir="$datarootdir" +-test "x$prefix" = xNONE && prefix=$ac_default_prefix +-test "x$exec_prefix" = xNONE && exec_prefix=$prefix +-datarootdir=`eval echo "${datarootdir}"` +-if test "x$CATOBJEXT" = "x.mo" ; then +- localedir=`eval echo "${libdir}/locale"` +-else +- localedir=`eval echo "${datadir}/locale"` +-fi +-prefix="$glib_save_prefix" +-exec_prefix="$glib_save_exec_prefix" +-datarootdir="$glib_save_datarootdir" +-AC_DEFINE_UNQUOTED($1, "$localedir", +- [Define the location where the catalogs will be installed]) +-]) +- +-dnl +-dnl Now the definitions that aclocal will find +-dnl +-ifdef(glib_configure_in,[],[ +-AC_DEFUN([AM_GLIB_GNU_GETTEXT],[GLIB_GNU_GETTEXT($@)]) +-AC_DEFUN([AM_GLIB_DEFINE_LOCALEDIR],[GLIB_DEFINE_LOCALEDIR($@)]) +-])dnl +- +-# GLIB_RUN_PROG(PROGRAM, TEST-FILE, [ACTION-IF-PASS], [ACTION-IF-FAIL]) +-# +-# Create a temporary file with TEST-FILE as its contents and pass the +-# file name to PROGRAM. Perform ACTION-IF-PASS if PROGRAM exits with +-# 0 and perform ACTION-IF-FAIL for any other exit status. +-AC_DEFUN([GLIB_RUN_PROG], +-[cat >conftest.foo <<_ACEOF +-$2 +-_ACEOF +-if AC_RUN_LOG([$1 conftest.foo]); then +- m4_ifval([$3], [$3], [:]) +-m4_ifvaln([$4], [else $4])dnl +-echo "$as_me: failed input was:" >&AS_MESSAGE_LOG_FD +-sed 's/^/| /' conftest.foo >&AS_MESSAGE_LOG_FD +-fi]) +- +- +-dnl GNOME_COMPILE_WARNINGS +-dnl Turn on many useful compiler warnings +-dnl For now, only works on GCC +-AC_DEFUN([GNOME_COMPILE_WARNINGS],[ +- dnl ****************************** +- dnl More compiler warnings +- dnl ****************************** +- +- AC_ARG_ENABLE(compile-warnings, +- AC_HELP_STRING([--enable-compile-warnings=@<:@no/minimum/yes/maximum/error@:>@], +- [Turn on compiler warnings]),, +- [enable_compile_warnings="m4_default([$1],[yes])"]) +- +- warnCFLAGS= +- if test "x$GCC" != xyes; then +- enable_compile_warnings=no +- fi +- +- warning_flags= +- realsave_CFLAGS="$CFLAGS" +- +- case "$enable_compile_warnings" in +- no) +- warning_flags= +- ;; +- minimum) +- warning_flags="-Wall" +- ;; +- yes) +- warning_flags="-Wall -Wmissing-prototypes" +- ;; +- maximum|error) +- warning_flags="-Wall -Wmissing-prototypes -Wnested-externs -Wpointer-arith" +- CFLAGS="$warning_flags $CFLAGS" +- for option in -Wno-sign-compare; do +- SAVE_CFLAGS="$CFLAGS" +- CFLAGS="$CFLAGS $option" +- AC_MSG_CHECKING([whether gcc understands $option]) +- AC_TRY_COMPILE([], [], +- has_option=yes, +- has_option=no,) +- CFLAGS="$SAVE_CFLAGS" +- AC_MSG_RESULT($has_option) +- if test $has_option = yes; then +- warning_flags="$warning_flags $option" +- fi +- unset has_option +- unset SAVE_CFLAGS +- done +- unset option +- if test "$enable_compile_warnings" = "error" ; then +- warning_flags="$warning_flags -Werror" +- fi +- ;; +- *) +- AC_MSG_ERROR(Unknown argument '$enable_compile_warnings' to --enable-compile-warnings) +- ;; +- esac +- CFLAGS="$realsave_CFLAGS" +- AC_MSG_CHECKING(what warning flags to pass to the C compiler) +- AC_MSG_RESULT($warning_flags) +- +- AC_ARG_ENABLE(iso-c, +- AC_HELP_STRING([--enable-iso-c], +- [Try to warn if code is not ISO C ]),, +- [enable_iso_c=no]) +- +- AC_MSG_CHECKING(what language compliance flags to pass to the C compiler) +- complCFLAGS= +- if test "x$enable_iso_c" != "xno"; then +- if test "x$GCC" = "xyes"; then +- case " $CFLAGS " in +- *[\ \ ]-ansi[\ \ ]*) ;; +- *) complCFLAGS="$complCFLAGS -ansi" ;; +- esac +- case " $CFLAGS " in +- *[\ \ ]-pedantic[\ \ ]*) ;; +- *) complCFLAGS="$complCFLAGS -pedantic" ;; +- esac +- fi +- fi +- AC_MSG_RESULT($complCFLAGS) +- +- WARN_CFLAGS="$warning_flags $complCFLAGS" +- AC_SUBST(WARN_CFLAGS) +-]) +- +-dnl For C++, do basically the same thing. +- +-AC_DEFUN([GNOME_CXX_WARNINGS],[ +- AC_ARG_ENABLE(cxx-warnings, +- AC_HELP_STRING([--enable-cxx-warnings=@<:@no/minimum/yes@:>@] +- [Turn on compiler warnings.]),, +- [enable_cxx_warnings="m4_default([$1],[minimum])"]) +- +- AC_MSG_CHECKING(what warning flags to pass to the C++ compiler) +- warnCXXFLAGS= +- if test "x$GXX" != xyes; then +- enable_cxx_warnings=no +- fi +- if test "x$enable_cxx_warnings" != "xno"; then +- if test "x$GXX" = "xyes"; then +- case " $CXXFLAGS " in +- *[\ \ ]-Wall[\ \ ]*) ;; +- *) warnCXXFLAGS="-Wall -Wno-unused" ;; +- esac +- +- ## -W is not all that useful. And it cannot be controlled +- ## with individual -Wno-xxx flags, unlike -Wall +- if test "x$enable_cxx_warnings" = "xyes"; then +- warnCXXFLAGS="$warnCXXFLAGS -Wshadow -Woverloaded-virtual" +- fi +- fi +- fi +- AC_MSG_RESULT($warnCXXFLAGS) +- +- AC_ARG_ENABLE(iso-cxx, +- AC_HELP_STRING([--enable-iso-cxx], +- [Try to warn if code is not ISO C++ ]),, +- [enable_iso_cxx=no]) +- +- AC_MSG_CHECKING(what language compliance flags to pass to the C++ compiler) +- complCXXFLAGS= +- if test "x$enable_iso_cxx" != "xno"; then +- if test "x$GXX" = "xyes"; then +- case " $CXXFLAGS " in +- *[\ \ ]-ansi[\ \ ]*) ;; +- *) complCXXFLAGS="$complCXXFLAGS -ansi" ;; +- esac +- +- case " $CXXFLAGS " in +- *[\ \ ]-pedantic[\ \ ]*) ;; +- *) complCXXFLAGS="$complCXXFLAGS -pedantic" ;; +- esac +- fi +- fi +- AC_MSG_RESULT($complCXXFLAGS) +- +- WARN_CXXFLAGS="$CXXFLAGS $warnCXXFLAGS $complCXXFLAGS" +- AC_SUBST(WARN_CXXFLAGS) +-]) +- +-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- +- +-# serial 51 AC_PROG_LIBTOOL +- +- +-# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) +-# ----------------------------------------------------------- +-# If this macro is not defined by Autoconf, define it here. +-m4_ifdef([AC_PROVIDE_IFELSE], +- [], +- [m4_define([AC_PROVIDE_IFELSE], +- [m4_ifdef([AC_PROVIDE_$1], +- [$2], [$3])])]) +- +- +-# AC_PROG_LIBTOOL +-# --------------- +-AC_DEFUN([AC_PROG_LIBTOOL], +-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl +-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX +-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. +- AC_PROVIDE_IFELSE([AC_PROG_CXX], +- [AC_LIBTOOL_CXX], +- [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX +- ])]) +-dnl And a similar setup for Fortran 77 support +- AC_PROVIDE_IFELSE([AC_PROG_F77], +- [AC_LIBTOOL_F77], +- [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77 +-])]) +- +-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. +-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run +-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. +- AC_PROVIDE_IFELSE([AC_PROG_GCJ], +- [AC_LIBTOOL_GCJ], +- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], +- [AC_LIBTOOL_GCJ], +- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], +- [AC_LIBTOOL_GCJ], +- [ifdef([AC_PROG_GCJ], +- [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) +- ifdef([A][M_PROG_GCJ], +- [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) +- ifdef([LT_AC_PROG_GCJ], +- [define([LT_AC_PROG_GCJ], +- defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) +-])])# AC_PROG_LIBTOOL +- +- +-# _AC_PROG_LIBTOOL +-# ---------------- +-AC_DEFUN([_AC_PROG_LIBTOOL], +-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl +-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl +-AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl +-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl +- +-# This can be used to rebuild libtool when needed +-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" +- +-# Always use our own libtool. +-LIBTOOL='$(SHELL) $(top_builddir)/libtool' +-AC_SUBST(LIBTOOL)dnl +- +-# Prevent multiple expansion +-define([AC_PROG_LIBTOOL], []) +-])# _AC_PROG_LIBTOOL +- +- +-# AC_LIBTOOL_SETUP +-# ---------------- +-AC_DEFUN([AC_LIBTOOL_SETUP], +-[AC_PREREQ(2.50)dnl +-AC_REQUIRE([AC_ENABLE_SHARED])dnl +-AC_REQUIRE([AC_ENABLE_STATIC])dnl +-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl +-AC_REQUIRE([AC_CANONICAL_HOST])dnl +-AC_REQUIRE([AC_CANONICAL_BUILD])dnl +-AC_REQUIRE([AC_PROG_CC])dnl +-AC_REQUIRE([AC_PROG_LD])dnl +-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl +-AC_REQUIRE([AC_PROG_NM])dnl +- +-AC_REQUIRE([AC_PROG_LN_S])dnl +-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl +-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! +-AC_REQUIRE([AC_OBJEXT])dnl +-AC_REQUIRE([AC_EXEEXT])dnl +-dnl +- +-AC_LIBTOOL_SYS_MAX_CMD_LEN +-AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +-AC_LIBTOOL_OBJDIR +- +-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl +-_LT_AC_PROG_ECHO_BACKSLASH +- +-case $host_os in +-aix3*) +- # AIX sometimes has problems with the GCC collect2 program. For some +- # reason, if we set the COLLECT_NAMES environment variable, the problems +- # vanish in a puff of smoke. +- if test "X${COLLECT_NAMES+set}" != Xset; then +- COLLECT_NAMES= +- export COLLECT_NAMES +- fi +- ;; +-esac +- +-# Sed substitution that helps us do robust quoting. It backslashifies +-# metacharacters that are still active within double-quoted strings. +-Xsed='sed -e 1s/^X//' +-[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] +- +-# Same as above, but do not quote variable references. +-[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] +- +-# Sed substitution to delay expansion of an escaped shell variable in a +-# double_quote_subst'ed string. +-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' +- +-# Sed substitution to avoid accidental globbing in evaled expressions +-no_glob_subst='s/\*/\\\*/g' +- +-# Constants: +-rm="rm -f" +- +-# Global variables: +-default_ofile=libtool +-can_build_shared=yes +- +-# All known linkers require a `.a' archive for static linking (except MSVC, +-# which needs '.lib'). +-libext=a +-ltmain="$ac_aux_dir/ltmain.sh" +-ofile="$default_ofile" +-with_gnu_ld="$lt_cv_prog_gnu_ld" +- +-AC_CHECK_TOOL(AR, ar, false) +-AC_CHECK_TOOL(RANLIB, ranlib, :) +-AC_CHECK_TOOL(STRIP, strip, :) +- +-old_CC="$CC" +-old_CFLAGS="$CFLAGS" +- +-# Set sane defaults for various variables +-test -z "$AR" && AR=ar +-test -z "$AR_FLAGS" && AR_FLAGS=cru +-test -z "$AS" && AS=as +-test -z "$CC" && CC=cc +-test -z "$LTCC" && LTCC=$CC +-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +-test -z "$DLLTOOL" && DLLTOOL=dlltool +-test -z "$LD" && LD=ld +-test -z "$LN_S" && LN_S="ln -s" +-test -z "$MAGIC_CMD" && MAGIC_CMD=file +-test -z "$NM" && NM=nm +-test -z "$SED" && SED=sed +-test -z "$OBJDUMP" && OBJDUMP=objdump +-test -z "$RANLIB" && RANLIB=: +-test -z "$STRIP" && STRIP=: +-test -z "$ac_objext" && ac_objext=o +- +-# Determine commands to create old-style static archives. +-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +-old_postinstall_cmds='chmod 644 $oldlib' +-old_postuninstall_cmds= +- +-if test -n "$RANLIB"; then +- case $host_os in +- openbsd*) +- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" +- ;; +- *) +- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" +- ;; +- esac +- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +-fi +- +-_LT_CC_BASENAME([$compiler]) +- +-# Only perform the check for file, if the check method requires it +-case $deplibs_check_method in +-file_magic*) +- if test "$file_magic_cmd" = '$MAGIC_CMD'; then +- AC_PATH_MAGIC +- fi +- ;; +-esac +- +-AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) +-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], +-enable_win32_dll=yes, enable_win32_dll=no) +- +-AC_ARG_ENABLE([libtool-lock], +- [AC_HELP_STRING([--disable-libtool-lock], +- [avoid locking (might break parallel builds)])]) +-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes +- +-AC_ARG_WITH([pic], +- [AC_HELP_STRING([--with-pic], +- [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], +- [pic_mode="$withval"], +- [pic_mode=default]) +-test -z "$pic_mode" && pic_mode=default +- +-# Use C for the default configuration in the libtool script +-tagname= +-AC_LIBTOOL_LANG_C_CONFIG +-_LT_AC_TAGCONFIG +-])# AC_LIBTOOL_SETUP +- +- +-# _LT_AC_SYS_COMPILER +-# ------------------- +-AC_DEFUN([_LT_AC_SYS_COMPILER], +-[AC_REQUIRE([AC_PROG_CC])dnl +- +-# If no C compiler was specified, use CC. +-LTCC=${LTCC-"$CC"} +- +-# If no C compiler flags were specified, use CFLAGS. +-LTCFLAGS=${LTCFLAGS-"$CFLAGS"} +- +-# Allow CC to be a program name with arguments. +-compiler=$CC +-])# _LT_AC_SYS_COMPILER +- +- +-# _LT_CC_BASENAME(CC) +-# ------------------- +-# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +-AC_DEFUN([_LT_CC_BASENAME], +-[for cc_temp in $1""; do +- case $cc_temp in +- compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; +- distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; +- \-*) ;; +- *) break;; +- esac +-done +-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` +-]) +- +- +-# _LT_COMPILER_BOILERPLATE +-# ------------------------ +-# Check for compiler boilerplate output or warnings with +-# the simple compiler test code. +-AC_DEFUN([_LT_COMPILER_BOILERPLATE], +-[AC_REQUIRE([LT_AC_PROG_SED])dnl +-ac_outfile=conftest.$ac_objext +-echo "$lt_simple_compile_test_code" >conftest.$ac_ext +-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +-_lt_compiler_boilerplate=`cat conftest.err` +-$rm conftest* +-])# _LT_COMPILER_BOILERPLATE +- +- +-# _LT_LINKER_BOILERPLATE +-# ---------------------- +-# Check for linker boilerplate output or warnings with +-# the simple link test code. +-AC_DEFUN([_LT_LINKER_BOILERPLATE], +-[AC_REQUIRE([LT_AC_PROG_SED])dnl +-ac_outfile=conftest.$ac_objext +-echo "$lt_simple_link_test_code" >conftest.$ac_ext +-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +-_lt_linker_boilerplate=`cat conftest.err` +-$rm conftest* +-])# _LT_LINKER_BOILERPLATE +- +- +-# _LT_AC_SYS_LIBPATH_AIX +-# ---------------------- +-# Links a minimal program and checks the executable +-# for the system default hardcoded library path. In most cases, +-# this is /usr/lib:/lib, but when the MPI compilers are used +-# the location of the communication and MPI libs are included too. +-# If we don't find anything, use the default library path according +-# to the aix ld manual. +-AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], +-[AC_REQUIRE([LT_AC_PROG_SED])dnl +-AC_LINK_IFELSE(AC_LANG_PROGRAM,[ +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *\(.*\)$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi],[]) +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +-])# _LT_AC_SYS_LIBPATH_AIX +- +- +-# _LT_AC_SHELL_INIT(ARG) +-# ---------------------- +-AC_DEFUN([_LT_AC_SHELL_INIT], +-[ifdef([AC_DIVERSION_NOTICE], +- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], +- [AC_DIVERT_PUSH(NOTICE)]) +-$1 +-AC_DIVERT_POP +-])# _LT_AC_SHELL_INIT +- +- +-# _LT_AC_PROG_ECHO_BACKSLASH +-# -------------------------- +-# Add some code to the start of the generated configure script which +-# will find an echo command which doesn't interpret backslashes. +-AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], +-[_LT_AC_SHELL_INIT([ +-# Check that we are running under the correct shell. +-SHELL=${CONFIG_SHELL-/bin/sh} +- +-case X$ECHO in +-X*--fallback-echo) +- # Remove one level of quotation (which was required for Make). +- ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` +- ;; +-esac +- +-echo=${ECHO-echo} +-if test "X[$]1" = X--no-reexec; then +- # Discard the --no-reexec flag, and continue. +- shift +-elif test "X[$]1" = X--fallback-echo; then +- # Avoid inline document here, it may be left over +- : +-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then +- # Yippee, $echo works! +- : +-else +- # Restart under the correct shell. +- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} +-fi +- +-if test "X[$]1" = X--fallback-echo; then +- # used as fallback echo +- shift +- cat </dev/null 2>&1 && unset CDPATH +- +-if test -z "$ECHO"; then +-if test "X${echo_test_string+set}" != Xset; then +-# find a string as large as possible, as long as the shell can cope with it +- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do +- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... +- if (echo_test_string=`eval $cmd`) 2>/dev/null && +- echo_test_string=`eval $cmd` && +- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null +- then +- break +- fi +- done +-fi +- +-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && +- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- : +-else +- # The Solaris, AIX, and Digital Unix default echo programs unquote +- # backslashes. This makes it impossible to quote backslashes using +- # echo "$something" | sed 's/\\/\\\\/g' +- # +- # So, first we look for a working echo in the user's PATH. +- +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +- for dir in $PATH /usr/ucb; do +- IFS="$lt_save_ifs" +- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && +- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && +- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- echo="$dir/echo" +- break +- fi +- done +- IFS="$lt_save_ifs" +- +- if test "X$echo" = Xecho; then +- # We didn't find a better echo, so look for alternatives. +- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && +- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- # This shell has a builtin print -r that does the trick. +- echo='print -r' +- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && +- test "X$CONFIG_SHELL" != X/bin/ksh; then +- # If we have ksh, try running configure again with it. +- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} +- export ORIGINAL_CONFIG_SHELL +- CONFIG_SHELL=/bin/ksh +- export CONFIG_SHELL +- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} +- else +- # Try using printf. +- echo='printf %s\n' +- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && +- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- # Cool, printf works +- : +- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && +- test "X$echo_testing_string" = 'X\t' && +- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL +- export CONFIG_SHELL +- SHELL="$CONFIG_SHELL" +- export SHELL +- echo="$CONFIG_SHELL [$]0 --fallback-echo" +- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && +- test "X$echo_testing_string" = 'X\t' && +- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- echo="$CONFIG_SHELL [$]0 --fallback-echo" +- else +- # maybe with a smaller string... +- prev=: +- +- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do +- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null +- then +- break +- fi +- prev="$cmd" +- done +- +- if test "$prev" != 'sed 50q "[$]0"'; then +- echo_test_string=`eval $prev` +- export echo_test_string +- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} +- else +- # Oops. We lost completely, so just stick with echo. +- echo=echo +- fi +- fi +- fi +- fi +-fi +-fi +- +-# Copy echo and quote the copy suitably for passing to libtool from +-# the Makefile, instead of quoting the original, which is used later. +-ECHO=$echo +-if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then +- ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" +-fi +- +-AC_SUBST(ECHO) +-])])# _LT_AC_PROG_ECHO_BACKSLASH +- +- +-# _LT_AC_LOCK +-# ----------- +-AC_DEFUN([_LT_AC_LOCK], +-[AC_ARG_ENABLE([libtool-lock], +- [AC_HELP_STRING([--disable-libtool-lock], +- [avoid locking (might break parallel builds)])]) +-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes +- +-# Some flags need to be propagated to the compiler or linker for good +-# libtool support. +-case $host in +-ia64-*-hpux*) +- # Find out which ABI we are using. +- echo 'int i;' > conftest.$ac_ext +- if AC_TRY_EVAL(ac_compile); then +- case `/usr/bin/file conftest.$ac_objext` in +- *ELF-32*) +- HPUX_IA64_MODE="32" +- ;; +- *ELF-64*) +- HPUX_IA64_MODE="64" +- ;; +- esac +- fi +- rm -rf conftest* +- ;; +-*-*-irix6*) +- # Find out which ABI we are using. +- echo '[#]line __oline__ "configure"' > conftest.$ac_ext +- if AC_TRY_EVAL(ac_compile); then +- if test "$lt_cv_prog_gnu_ld" = yes; then +- case `/usr/bin/file conftest.$ac_objext` in +- *32-bit*) +- LD="${LD-ld} -melf32bsmip" +- ;; +- *N32*) +- LD="${LD-ld} -melf32bmipn32" +- ;; +- *64-bit*) +- LD="${LD-ld} -melf64bmip" +- ;; +- esac +- else +- case `/usr/bin/file conftest.$ac_objext` in +- *32-bit*) +- LD="${LD-ld} -32" +- ;; +- *N32*) +- LD="${LD-ld} -n32" +- ;; +- *64-bit*) +- LD="${LD-ld} -64" +- ;; +- esac +- fi +- fi +- rm -rf conftest* +- ;; +- +-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +-s390*-*linux*|sparc*-*linux*) +- # Find out which ABI we are using. +- echo 'int i;' > conftest.$ac_ext +- if AC_TRY_EVAL(ac_compile); then +- case `/usr/bin/file conftest.o` in +- *32-bit*) +- case $host in +- x86_64-*kfreebsd*-gnu) +- LD="${LD-ld} -m elf_i386_fbsd" +- ;; +- x86_64-*linux*) +- LD="${LD-ld} -m elf_i386" +- ;; +- ppc64-*linux*|powerpc64-*linux*) +- LD="${LD-ld} -m elf32ppclinux" +- ;; +- s390x-*linux*) +- LD="${LD-ld} -m elf_s390" +- ;; +- sparc64-*linux*) +- LD="${LD-ld} -m elf32_sparc" +- ;; +- esac +- ;; +- *64-bit*) +- libsuff=64 +- case $host in +- x86_64-*kfreebsd*-gnu) +- LD="${LD-ld} -m elf_x86_64_fbsd" +- ;; +- x86_64-*linux*) +- LD="${LD-ld} -m elf_x86_64" +- ;; +- ppc*-*linux*|powerpc*-*linux*) +- LD="${LD-ld} -m elf64ppc" +- ;; +- s390*-*linux*) +- LD="${LD-ld} -m elf64_s390" +- ;; +- sparc*-*linux*) +- LD="${LD-ld} -m elf64_sparc" +- ;; +- esac +- ;; +- esac +- fi +- rm -rf conftest* +- ;; +- +-*-*-sco3.2v5*) +- # On SCO OpenServer 5, we need -belf to get full-featured binaries. +- SAVE_CFLAGS="$CFLAGS" +- CFLAGS="$CFLAGS -belf" +- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, +- [AC_LANG_PUSH(C) +- AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) +- AC_LANG_POP]) +- if test x"$lt_cv_cc_needs_belf" != x"yes"; then +- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf +- CFLAGS="$SAVE_CFLAGS" +- fi +- ;; +-sparc*-*solaris*) +- # Find out which ABI we are using. +- echo 'int i;' > conftest.$ac_ext +- if AC_TRY_EVAL(ac_compile); then +- case `/usr/bin/file conftest.o` in +- *64-bit*) +- case $lt_cv_prog_gnu_ld in +- yes*) LD="${LD-ld} -m elf64_sparc" ;; +- *) LD="${LD-ld} -64" ;; +- esac +- ;; +- esac +- fi +- rm -rf conftest* +- ;; +- +-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], +-[*-*-cygwin* | *-*-mingw* | *-*-pw32*) +- AC_CHECK_TOOL(DLLTOOL, dlltool, false) +- AC_CHECK_TOOL(AS, as, false) +- AC_CHECK_TOOL(OBJDUMP, objdump, false) +- ;; +- ]) +-esac +- +-need_locks="$enable_libtool_lock" +- +-])# _LT_AC_LOCK +- +- +-# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +-# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) +-# ---------------------------------------------------------------- +-# Check whether the given compiler option works +-AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], +-[AC_REQUIRE([LT_AC_PROG_SED]) +-AC_CACHE_CHECK([$1], [$2], +- [$2=no +- ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext +- lt_compiler_flag="$3" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- # The option is referenced via a variable to avoid confusing sed. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ +- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) +- (eval "$lt_compile" 2>conftest.err) +- ac_status=$? +- cat conftest.err >&AS_MESSAGE_LOG_FD +- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD +- if (exit $ac_status) && test -s "$ac_outfile"; then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings other than the usual output. +- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp +- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 +- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then +- $2=yes +- fi +- fi +- $rm conftest* +-]) +- +-if test x"[$]$2" = xyes; then +- ifelse([$5], , :, [$5]) +-else +- ifelse([$6], , :, [$6]) +-fi +-])# AC_LIBTOOL_COMPILER_OPTION +- +- +-# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +-# [ACTION-SUCCESS], [ACTION-FAILURE]) +-# ------------------------------------------------------------ +-# Check whether the given compiler option works +-AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], +-[AC_REQUIRE([LT_AC_PROG_SED])dnl +-AC_CACHE_CHECK([$1], [$2], +- [$2=no +- save_LDFLAGS="$LDFLAGS" +- LDFLAGS="$LDFLAGS $3" +- echo "$lt_simple_link_test_code" > conftest.$ac_ext +- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then +- # The linker can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test -s conftest.err; then +- # Append any errors to the config.log. +- cat conftest.err 1>&AS_MESSAGE_LOG_FD +- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp +- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 +- if diff conftest.exp conftest.er2 >/dev/null; then +- $2=yes +- fi +- else +- $2=yes +- fi +- fi +- $rm conftest* +- LDFLAGS="$save_LDFLAGS" +-]) +- +-if test x"[$]$2" = xyes; then +- ifelse([$4], , :, [$4]) +-else +- ifelse([$5], , :, [$5]) +-fi +-])# AC_LIBTOOL_LINKER_OPTION +- +- +-# AC_LIBTOOL_SYS_MAX_CMD_LEN +-# -------------------------- +-AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], +-[# find the maximum length of command line arguments +-AC_MSG_CHECKING([the maximum length of command line arguments]) +-AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl +- i=0 +- teststring="ABCD" +- +- case $build_os in +- msdosdjgpp*) +- # On DJGPP, this test can blow up pretty badly due to problems in libc +- # (any single argument exceeding 2000 bytes causes a buffer overrun +- # during glob expansion). Even if it were fixed, the result of this +- # check would be larger than it should be. +- lt_cv_sys_max_cmd_len=12288; # 12K is about right +- ;; +- +- gnu*) +- # Under GNU Hurd, this test is not required because there is +- # no limit to the length of command line arguments. +- # Libtool will interpret -1 as no limit whatsoever +- lt_cv_sys_max_cmd_len=-1; +- ;; +- +- cygwin* | mingw*) +- # On Win9x/ME, this test blows up -- it succeeds, but takes +- # about 5 minutes as the teststring grows exponentially. +- # Worse, since 9x/ME are not pre-emptively multitasking, +- # you end up with a "frozen" computer, even though with patience +- # the test eventually succeeds (with a max line length of 256k). +- # Instead, let's just punt: use the minimum linelength reported by +- # all of the supported platforms: 8192 (on NT/2K/XP). +- lt_cv_sys_max_cmd_len=8192; +- ;; +- +- amigaos*) +- # On AmigaOS with pdksh, this test takes hours, literally. +- # So we just punt and use a minimum line length of 8192. +- lt_cv_sys_max_cmd_len=8192; +- ;; +- +- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) +- # This has been around since 386BSD, at least. Likely further. +- if test -x /sbin/sysctl; then +- lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` +- elif test -x /usr/sbin/sysctl; then +- lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` +- else +- lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs +- fi +- # And add a safety zone +- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` +- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` +- ;; +- +- interix*) +- # We know the value 262144 and hardcode it with a safety zone (like BSD) +- lt_cv_sys_max_cmd_len=196608 +- ;; +- +- osf*) +- # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure +- # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not +- # nice to cause kernel panics so lets avoid the loop below. +- # First set a reasonable default. +- lt_cv_sys_max_cmd_len=16384 +- # +- if test -x /sbin/sysconfig; then +- case `/sbin/sysconfig -q proc exec_disable_arg_limit` in +- *1*) lt_cv_sys_max_cmd_len=-1 ;; +- esac +- fi +- ;; +- sco3.2v5*) +- lt_cv_sys_max_cmd_len=102400 +- ;; +- sysv5* | sco5v6* | sysv4.2uw2*) +- kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` +- if test -n "$kargmax"; then +- lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` +- else +- lt_cv_sys_max_cmd_len=32768 +- fi +- ;; +- *) +- lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` +- if test -n "$lt_cv_sys_max_cmd_len"; then +- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` +- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` +- else +- SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} +- while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \ +- = "XX$teststring") >/dev/null 2>&1 && +- new_result=`expr "X$teststring" : ".*" 2>&1` && +- lt_cv_sys_max_cmd_len=$new_result && +- test $i != 17 # 1/2 MB should be enough +- do +- i=`expr $i + 1` +- teststring=$teststring$teststring +- done +- teststring= +- # Add a significant safety factor because C++ compilers can tack on massive +- # amounts of additional arguments before passing them to the linker. +- # It appears as though 1/2 is a usable value. +- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` +- fi +- ;; +- esac +-]) +-if test -n $lt_cv_sys_max_cmd_len ; then +- AC_MSG_RESULT($lt_cv_sys_max_cmd_len) +-else +- AC_MSG_RESULT(none) +-fi +-])# AC_LIBTOOL_SYS_MAX_CMD_LEN +- +- +-# _LT_AC_CHECK_DLFCN +-# ------------------ +-AC_DEFUN([_LT_AC_CHECK_DLFCN], +-[AC_CHECK_HEADERS(dlfcn.h)dnl +-])# _LT_AC_CHECK_DLFCN +- +- +-# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +-# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +-# --------------------------------------------------------------------- +-AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], +-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl +-if test "$cross_compiling" = yes; then : +- [$4] +-else +- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 +- lt_status=$lt_dlunknown +- cat > conftest.$ac_ext < +-#endif +- +-#include +- +-#ifdef RTLD_GLOBAL +-# define LT_DLGLOBAL RTLD_GLOBAL +-#else +-# ifdef DL_GLOBAL +-# define LT_DLGLOBAL DL_GLOBAL +-# else +-# define LT_DLGLOBAL 0 +-# endif +-#endif +- +-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we +- find out it does not work in some platform. */ +-#ifndef LT_DLLAZY_OR_NOW +-# ifdef RTLD_LAZY +-# define LT_DLLAZY_OR_NOW RTLD_LAZY +-# else +-# ifdef DL_LAZY +-# define LT_DLLAZY_OR_NOW DL_LAZY +-# else +-# ifdef RTLD_NOW +-# define LT_DLLAZY_OR_NOW RTLD_NOW +-# else +-# ifdef DL_NOW +-# define LT_DLLAZY_OR_NOW DL_NOW +-# else +-# define LT_DLLAZY_OR_NOW 0 +-# endif +-# endif +-# endif +-# endif +-#endif +- +-#ifdef __cplusplus +-extern "C" void exit (int); +-#endif +- +-void fnord() { int i=42;} +-int main () +-{ +- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +- int status = $lt_dlunknown; +- +- if (self) +- { +- if (dlsym (self,"fnord")) status = $lt_dlno_uscore; +- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; +- /* dlclose (self); */ +- } +- else +- puts (dlerror ()); +- +- exit (status); +-}] +-EOF +- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then +- (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null +- lt_status=$? +- case x$lt_status in +- x$lt_dlno_uscore) $1 ;; +- x$lt_dlneed_uscore) $2 ;; +- x$lt_dlunknown|x*) $3 ;; +- esac +- else : +- # compilation failed +- $3 +- fi +-fi +-rm -fr conftest* +-])# _LT_AC_TRY_DLOPEN_SELF +- +- +-# AC_LIBTOOL_DLOPEN_SELF +-# ---------------------- +-AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], +-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl +-if test "x$enable_dlopen" != xyes; then +- enable_dlopen=unknown +- enable_dlopen_self=unknown +- enable_dlopen_self_static=unknown +-else +- lt_cv_dlopen=no +- lt_cv_dlopen_libs= +- +- case $host_os in +- beos*) +- lt_cv_dlopen="load_add_on" +- lt_cv_dlopen_libs= +- lt_cv_dlopen_self=yes +- ;; +- +- mingw* | pw32*) +- lt_cv_dlopen="LoadLibrary" +- lt_cv_dlopen_libs= +- ;; +- +- cygwin*) +- lt_cv_dlopen="dlopen" +- lt_cv_dlopen_libs= +- ;; +- +- darwin*) +- # if libdl is installed we need to link against it +- AC_CHECK_LIB([dl], [dlopen], +- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ +- lt_cv_dlopen="dyld" +- lt_cv_dlopen_libs= +- lt_cv_dlopen_self=yes +- ]) +- ;; +- +- *) +- AC_CHECK_FUNC([shl_load], +- [lt_cv_dlopen="shl_load"], +- [AC_CHECK_LIB([dld], [shl_load], +- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], +- [AC_CHECK_FUNC([dlopen], +- [lt_cv_dlopen="dlopen"], +- [AC_CHECK_LIB([dl], [dlopen], +- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], +- [AC_CHECK_LIB([svld], [dlopen], +- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], +- [AC_CHECK_LIB([dld], [dld_link], +- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) +- ]) +- ]) +- ]) +- ]) +- ]) +- ;; +- esac +- +- if test "x$lt_cv_dlopen" != xno; then +- enable_dlopen=yes +- else +- enable_dlopen=no +- fi +- +- case $lt_cv_dlopen in +- dlopen) +- save_CPPFLAGS="$CPPFLAGS" +- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" +- +- save_LDFLAGS="$LDFLAGS" +- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" +- +- save_LIBS="$LIBS" +- LIBS="$lt_cv_dlopen_libs $LIBS" +- +- AC_CACHE_CHECK([whether a program can dlopen itself], +- lt_cv_dlopen_self, [dnl +- _LT_AC_TRY_DLOPEN_SELF( +- lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, +- lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) +- ]) +- +- if test "x$lt_cv_dlopen_self" = xyes; then +- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" +- AC_CACHE_CHECK([whether a statically linked program can dlopen itself], +- lt_cv_dlopen_self_static, [dnl +- _LT_AC_TRY_DLOPEN_SELF( +- lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, +- lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) +- ]) +- fi +- +- CPPFLAGS="$save_CPPFLAGS" +- LDFLAGS="$save_LDFLAGS" +- LIBS="$save_LIBS" +- ;; +- esac +- +- case $lt_cv_dlopen_self in +- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; +- *) enable_dlopen_self=unknown ;; +- esac +- +- case $lt_cv_dlopen_self_static in +- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; +- *) enable_dlopen_self_static=unknown ;; +- esac +-fi +-])# AC_LIBTOOL_DLOPEN_SELF +- +- +-# AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) +-# --------------------------------- +-# Check to see if options -c and -o are simultaneously supported by compiler +-AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], +-[AC_REQUIRE([LT_AC_PROG_SED])dnl +-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl +-AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], +- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], +- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no +- $rm -r conftest 2>/dev/null +- mkdir conftest +- cd conftest +- mkdir out +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext +- +- lt_compiler_flag="-o out/conftest2.$ac_objext" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ +- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) +- (eval "$lt_compile" 2>out/conftest.err) +- ac_status=$? +- cat out/conftest.err >&AS_MESSAGE_LOG_FD +- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD +- if (exit $ac_status) && test -s out/conftest2.$ac_objext +- then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp +- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 +- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then +- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes +- fi +- fi +- chmod u+w . 2>&AS_MESSAGE_LOG_FD +- $rm conftest* +- # SGI C++ compiler will create directory out/ii_files/ for +- # template instantiation +- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files +- $rm out/* && rmdir out +- cd .. +- rmdir conftest +- $rm conftest* +-]) +-])# AC_LIBTOOL_PROG_CC_C_O +- +- +-# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) +-# ----------------------------------------- +-# Check to see if we can do hard links to lock some files if needed +-AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], +-[AC_REQUIRE([_LT_AC_LOCK])dnl +- +-hard_links="nottested" +-if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then +- # do not overwrite the value of need_locks provided by the user +- AC_MSG_CHECKING([if we can lock with hard links]) +- hard_links=yes +- $rm conftest* +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- touch conftest.a +- ln conftest.a conftest.b 2>&5 || hard_links=no +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- AC_MSG_RESULT([$hard_links]) +- if test "$hard_links" = no; then +- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) +- need_locks=warn +- fi +-else +- need_locks=no +-fi +-])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS +- +- +-# AC_LIBTOOL_OBJDIR +-# ----------------- +-AC_DEFUN([AC_LIBTOOL_OBJDIR], +-[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], +-[rm -f .libs 2>/dev/null +-mkdir .libs 2>/dev/null +-if test -d .libs; then +- lt_cv_objdir=.libs +-else +- # MS-DOS does not allow filenames that begin with a dot. +- lt_cv_objdir=_libs +-fi +-rmdir .libs 2>/dev/null]) +-objdir=$lt_cv_objdir +-])# AC_LIBTOOL_OBJDIR +- +- +-# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) +-# ---------------------------------------------- +-# Check hardcoding attributes. +-AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], +-[AC_MSG_CHECKING([how to hardcode library paths into programs]) +-_LT_AC_TAGVAR(hardcode_action, $1)= +-if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ +- test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \ +- test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then +- +- # We can hardcode non-existant directories. +- if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && +- # If the only mechanism to avoid hardcoding is shlibpath_var, we +- # have to relink, otherwise we might link with an installed library +- # when we should be linking with a yet-to-be-installed one +- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && +- test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then +- # Linking always hardcodes the temporary library directory. +- _LT_AC_TAGVAR(hardcode_action, $1)=relink +- else +- # We can link without hardcoding, and we can hardcode nonexisting dirs. +- _LT_AC_TAGVAR(hardcode_action, $1)=immediate +- fi +-else +- # We cannot hardcode anything, or else we can only hardcode existing +- # directories. +- _LT_AC_TAGVAR(hardcode_action, $1)=unsupported +-fi +-AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) +- +-if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then +- # Fast installation is not supported +- enable_fast_install=no +-elif test "$shlibpath_overrides_runpath" = yes || +- test "$enable_shared" = no; then +- # Fast installation is not necessary +- enable_fast_install=needless +-fi +-])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH +- +- +-# AC_LIBTOOL_SYS_LIB_STRIP +-# ------------------------ +-AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], +-[striplib= +-old_striplib= +-AC_MSG_CHECKING([whether stripping libraries is possible]) +-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then +- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" +- test -z "$striplib" && striplib="$STRIP --strip-unneeded" +- AC_MSG_RESULT([yes]) +-else +-# FIXME - insert some real tests, host_os isn't really good enough +- case $host_os in +- darwin*) +- if test -n "$STRIP" ; then +- striplib="$STRIP -x" +- old_striplib="$STRIP -S" +- AC_MSG_RESULT([yes]) +- else +- AC_MSG_RESULT([no]) +-fi +- ;; +- *) +- AC_MSG_RESULT([no]) +- ;; +- esac +-fi +-])# AC_LIBTOOL_SYS_LIB_STRIP +- +- +-# AC_LIBTOOL_SYS_DYNAMIC_LINKER +-# ----------------------------- +-# PORTME Fill in your ld.so characteristics +-AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], +-[AC_REQUIRE([LT_AC_PROG_SED])dnl +-AC_MSG_CHECKING([dynamic linker characteristics]) +-library_names_spec= +-libname_spec='lib$name' +-soname_spec= +-shrext_cmds=".so" +-postinstall_cmds= +-postuninstall_cmds= +-finish_cmds= +-finish_eval= +-shlibpath_var= +-shlibpath_overrides_runpath=unknown +-version_type=none +-dynamic_linker="$host_os ld.so" +-sys_lib_dlsearch_path_spec="/lib /usr/lib" +-m4_if($1,[],[ +-if test "$GCC" = yes; then +- case $host_os in +- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; +- *) lt_awk_arg="/^libraries:/" ;; +- esac +- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then +- # if the path contains ";" then we assume it to be the separator +- # otherwise default to the standard path separator (i.e. ":") - it is +- # assumed that no part of a normal pathname contains ";" but that should +- # okay in the real world where ";" in dirpaths is itself problematic. +- lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'` +- else +- lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` +- fi +- # Ok, now we have the path, separated by spaces, we can step through it +- # and add multilib dir if necessary. +- lt_tmp_lt_search_path_spec= +- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` +- for lt_sys_path in $lt_search_path_spec; do +- if test -d "$lt_sys_path/$lt_multi_os_dir"; then +- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" +- else +- test -d "$lt_sys_path" && \ +- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" +- fi +- done +- lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk ' +-BEGIN {RS=" "; FS="/|\n";} { +- lt_foo=""; +- lt_count=0; +- for (lt_i = NF; lt_i > 0; lt_i--) { +- if ($lt_i != "" && $lt_i != ".") { +- if ($lt_i == "..") { +- lt_count++; +- } else { +- if (lt_count == 0) { +- lt_foo="/" $lt_i lt_foo; +- } else { +- lt_count--; +- } +- } +- } +- } +- if (lt_foo != "") { lt_freq[[lt_foo]]++; } +- if (lt_freq[[lt_foo]] == 1) { print lt_foo; } +-}'` +- sys_lib_search_path_spec=`echo $lt_search_path_spec` +-else +- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +-fi]) +-need_lib_prefix=unknown +-hardcode_into_libs=no +- +-# when you set need_version to no, make sure it does not cause -set_version +-# flags to be left without arguments +-need_version=unknown +- +-case $host_os in +-aix3*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' +- shlibpath_var=LIBPATH +- +- # AIX 3 has no versioning support, so we append a major version to the name. +- soname_spec='${libname}${release}${shared_ext}$major' +- ;; +- +-aix4* | aix5*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- hardcode_into_libs=yes +- if test "$host_cpu" = ia64; then +- # AIX 5 supports IA64 +- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- else +- # With GCC up to 2.95.x, collect2 would create an import file +- # for dependence libraries. The import file would start with +- # the line `#! .'. This would cause the generated library to +- # depend on `.', always an invalid library. This was fixed in +- # development snapshots of GCC prior to 3.0. +- case $host_os in +- aix4 | aix4.[[01]] | aix4.[[01]].*) +- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' +- echo ' yes ' +- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then +- : +- else +- can_build_shared=no +- fi +- ;; +- esac +- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct +- # soname into executable. Probably we can add versioning support to +- # collect2, so additional links can be useful in future. +- if test "$aix_use_runtimelinking" = yes; then +- # If using run time linking (on AIX 4.2 or later) use lib.so +- # instead of lib.a to let people know that these are not +- # typical AIX shared libraries. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- else +- # We preserve .a as extension for shared libraries through AIX4.2 +- # and later when we are not doing run time linking. +- library_names_spec='${libname}${release}.a $libname.a' +- soname_spec='${libname}${release}${shared_ext}$major' +- fi +- shlibpath_var=LIBPATH +- fi +- ;; +- +-amigaos*) +- library_names_spec='$libname.ixlibrary $libname.a' +- # Create ${libname}_ixlibrary.a entries in /sys/libs. +- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' +- ;; +- +-beos*) +- library_names_spec='${libname}${shared_ext}' +- dynamic_linker="$host_os ld.so" +- shlibpath_var=LIBRARY_PATH +- ;; +- +-bsdi[[45]]*) +- version_type=linux +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" +- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" +- # the default ld.so.conf also contains /usr/contrib/lib and +- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow +- # libtool to hard-code these into programs +- ;; +- +-cygwin* | mingw* | pw32*) +- version_type=windows +- shrext_cmds=".dll" +- need_version=no +- need_lib_prefix=no +- +- case $GCC,$host_os in +- yes,cygwin* | yes,mingw* | yes,pw32*) +- library_names_spec='$libname.dll.a' +- # DLL is installed to $(libdir)/../bin by postinstall_cmds +- postinstall_cmds='base_file=`basename \${file}`~ +- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ +- dldir=$destdir/`dirname \$dlpath`~ +- test -d \$dldir || mkdir -p \$dldir~ +- $install_prog $dir/$dlname \$dldir/$dlname~ +- chmod a+x \$dldir/$dlname' +- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ +- dlpath=$dir/\$dldll~ +- $rm \$dlpath' +- shlibpath_overrides_runpath=yes +- +- case $host_os in +- cygwin*) +- # Cygwin DLLs use 'cyg' prefix rather than 'lib' +- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' +- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" +- ;; +- mingw*) +- # MinGW DLLs use traditional 'lib' prefix +- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' +- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then +- # It is most probably a Windows format PATH printed by +- # mingw gcc, but we are running on Cygwin. Gcc prints its search +- # path with ; separators, and with drive letters. We can handle the +- # drive letters (cygwin fileutils understands them), so leave them, +- # especially as we might pass files found there to a mingw objdump, +- # which wouldn't understand a cygwinified path. Ahh. +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` +- else +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` +- fi +- ;; +- pw32*) +- # pw32 DLLs use 'pw' prefix rather than 'lib' +- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' +- ;; +- esac +- ;; +- +- *) +- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' +- ;; +- esac +- dynamic_linker='Win32 ld.exe' +- # FIXME: first we should search . and the directory the executable is in +- shlibpath_var=PATH +- ;; +- +-darwin* | rhapsody*) +- dynamic_linker="$host_os dyld" +- version_type=darwin +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' +- soname_spec='${libname}${release}${major}$shared_ext' +- shlibpath_overrides_runpath=yes +- shlibpath_var=DYLD_LIBRARY_PATH +- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' +- m4_if([$1], [],[ +- sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) +- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' +- ;; +- +-dgux*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- ;; +- +-freebsd1*) +- dynamic_linker=no +- ;; +- +-freebsd* | dragonfly*) +- # DragonFly does not have aout. When/if they implement a new +- # versioning mechanism, adjust this. +- if test -x /usr/bin/objformat; then +- objformat=`/usr/bin/objformat` +- else +- case $host_os in +- freebsd[[123]]*) objformat=aout ;; +- *) objformat=elf ;; +- esac +- fi +- version_type=freebsd-$objformat +- case $version_type in +- freebsd-elf*) +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' +- need_version=no +- need_lib_prefix=no +- ;; +- freebsd-*) +- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' +- need_version=yes +- ;; +- esac +- shlibpath_var=LD_LIBRARY_PATH +- case $host_os in +- freebsd2*) +- shlibpath_overrides_runpath=yes +- ;; +- freebsd3.[[01]]* | freebsdelf3.[[01]]*) +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; +- freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ +- freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- ;; +- *) # from 4.6 on, and DragonFly +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; +- esac +- ;; +- +-gnu*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- hardcode_into_libs=yes +- ;; +- +-hpux9* | hpux10* | hpux11*) +- # Give a soname corresponding to the major version so that dld.sl refuses to +- # link against other versions. +- version_type=sunos +- need_lib_prefix=no +- need_version=no +- case $host_cpu in +- ia64*) +- shrext_cmds='.so' +- hardcode_into_libs=yes +- dynamic_linker="$host_os dld.so" +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- if test "X$HPUX_IA64_MODE" = X32; then +- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" +- else +- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" +- fi +- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec +- ;; +- hppa*64*) +- shrext_cmds='.sl' +- hardcode_into_libs=yes +- dynamic_linker="$host_os dld.sl" +- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH +- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" +- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec +- ;; +- *) +- shrext_cmds='.sl' +- dynamic_linker="$host_os dld.sl" +- shlibpath_var=SHLIB_PATH +- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- ;; +- esac +- # HP-UX runs *really* slowly unless shared libraries are mode 555. +- postinstall_cmds='chmod 555 $lib' +- ;; +- +-interix[[3-9]]*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- ;; +- +-irix5* | irix6* | nonstopux*) +- case $host_os in +- nonstopux*) version_type=nonstopux ;; +- *) +- if test "$lt_cv_prog_gnu_ld" = yes; then +- version_type=linux +- else +- version_type=irix +- fi ;; +- esac +- need_lib_prefix=no +- need_version=no +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' +- case $host_os in +- irix5* | nonstopux*) +- libsuff= shlibsuff= +- ;; +- *) +- case $LD in # libtool.m4 will add one of these switches to LD +- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") +- libsuff= shlibsuff= libmagic=32-bit;; +- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") +- libsuff=32 shlibsuff=N32 libmagic=N32;; +- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") +- libsuff=64 shlibsuff=64 libmagic=64-bit;; +- *) libsuff= shlibsuff= libmagic=never-match;; +- esac +- ;; +- esac +- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" +- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" +- hardcode_into_libs=yes +- ;; +- +-# No shared lib support for Linux oldld, aout, or coff. +-linux*oldld* | linux*aout* | linux*coff*) +- dynamic_linker=no +- ;; +- +-# This must be Linux ELF. +-linux* | k*bsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- # This implies no fast_install, which is unacceptable. +- # Some rework will be needed to allow for fast_install +- # before this can be enabled. +- hardcode_into_libs=yes +- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" +- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" +- +- # Append ld.so.conf contents to the search path +- if test -f /etc/ld.so.conf; then +- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" +- fi +- +- # We used to test for /lib/ld.so.1 and disable shared libraries on +- # powerpc, because MkLinux only supported shared libraries with the +- # GNU dynamic linker. Since this was broken with cross compilers, +- # most powerpc-linux boxes support dynamic linking these days and +- # people can always --disable-shared, the test was removed, and we +- # assume the GNU/Linux dynamic linker is in use. +- dynamic_linker='GNU/Linux ld.so' +- ;; +- +-netbsd*) +- version_type=sunos +- need_lib_prefix=no +- need_version=no +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- dynamic_linker='NetBSD (a.out) ld.so' +- else +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- dynamic_linker='NetBSD ld.elf_so' +- fi +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; +- +-newsos6) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- ;; +- +-nto-qnx*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- ;; +- +-openbsd*) +- version_type=sunos +- sys_lib_dlsearch_path_spec="/usr/lib" +- need_lib_prefix=no +- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. +- case $host_os in +- openbsd3.3 | openbsd3.3.*) need_version=yes ;; +- *) need_version=no ;; +- esac +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- case $host_os in +- openbsd2.[[89]] | openbsd2.[[89]].*) +- shlibpath_overrides_runpath=no +- ;; +- *) +- shlibpath_overrides_runpath=yes +- ;; +- esac +- else +- shlibpath_overrides_runpath=yes +- fi +- ;; +- +-os2*) +- libname_spec='$name' +- shrext_cmds=".dll" +- need_lib_prefix=no +- library_names_spec='$libname${shared_ext} $libname.a' +- dynamic_linker='OS/2 ld.exe' +- shlibpath_var=LIBPATH +- ;; +- +-osf3* | osf4* | osf5*) +- version_type=osf +- need_lib_prefix=no +- need_version=no +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" +- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" +- ;; +- +-rdos*) +- dynamic_linker=no +- ;; +- +-solaris*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- # ldd complains unless libraries are executable +- postinstall_cmds='chmod +x $lib' +- ;; +- +-sunos4*) +- version_type=sunos +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- if test "$with_gnu_ld" = yes; then +- need_lib_prefix=no +- fi +- need_version=yes +- ;; +- +-sysv4 | sysv4.3*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- case $host_vendor in +- sni) +- shlibpath_overrides_runpath=no +- need_lib_prefix=no +- export_dynamic_flag_spec='${wl}-Blargedynsym' +- runpath_var=LD_RUN_PATH +- ;; +- siemens) +- need_lib_prefix=no +- ;; +- motorola) +- need_lib_prefix=no +- need_version=no +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' +- ;; +- esac +- ;; +- +-sysv4*MP*) +- if test -d /usr/nec ;then +- version_type=linux +- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' +- soname_spec='$libname${shared_ext}.$major' +- shlibpath_var=LD_LIBRARY_PATH +- fi +- ;; +- +-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) +- version_type=freebsd-elf +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- hardcode_into_libs=yes +- if test "$with_gnu_ld" = yes; then +- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' +- shlibpath_overrides_runpath=no +- else +- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' +- shlibpath_overrides_runpath=yes +- case $host_os in +- sco3.2v5*) +- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" +- ;; +- esac +- fi +- sys_lib_dlsearch_path_spec='/usr/lib' +- ;; +- +-uts4*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- ;; +- +-*) +- dynamic_linker=no +- ;; +-esac +-AC_MSG_RESULT([$dynamic_linker]) +-test "$dynamic_linker" = no && can_build_shared=no +- +-variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +-if test "$GCC" = yes; then +- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +-fi +-])# AC_LIBTOOL_SYS_DYNAMIC_LINKER +- +- +-# _LT_AC_TAGCONFIG +-# ---------------- +-AC_DEFUN([_LT_AC_TAGCONFIG], +-[AC_REQUIRE([LT_AC_PROG_SED])dnl +-AC_ARG_WITH([tags], +- [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@], +- [include additional configurations @<:@automatic@:>@])], +- [tagnames="$withval"]) +- +-if test -f "$ltmain" && test -n "$tagnames"; then +- if test ! -f "${ofile}"; then +- AC_MSG_WARN([output file `$ofile' does not exist]) +- fi +- +- if test -z "$LTCC"; then +- eval "`$SHELL ${ofile} --config | grep '^LTCC='`" +- if test -z "$LTCC"; then +- AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) +- else +- AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) +- fi +- fi +- if test -z "$LTCFLAGS"; then +- eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`" +- fi +- +- # Extract list of available tagged configurations in $ofile. +- # Note that this assumes the entire list is on one line. +- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` +- +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for tagname in $tagnames; do +- IFS="$lt_save_ifs" +- # Check whether tagname contains only valid characters +- case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in +- "") ;; +- *) AC_MSG_ERROR([invalid tag name: $tagname]) +- ;; +- esac +- +- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null +- then +- AC_MSG_ERROR([tag name \"$tagname\" already exists]) +- fi +- +- # Update the list of available tags. +- if test -n "$tagname"; then +- echo appending configuration tag \"$tagname\" to $ofile +- +- case $tagname in +- CXX) +- if test -n "$CXX" && ( test "X$CXX" != "Xno" && +- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || +- (test "X$CXX" != "Xg++"))) ; then +- AC_LIBTOOL_LANG_CXX_CONFIG +- else +- tagname="" +- fi +- ;; +- +- F77) +- if test -n "$F77" && test "X$F77" != "Xno"; then +- AC_LIBTOOL_LANG_F77_CONFIG +- else +- tagname="" +- fi +- ;; +- +- GCJ) +- if test -n "$GCJ" && test "X$GCJ" != "Xno"; then +- AC_LIBTOOL_LANG_GCJ_CONFIG +- else +- tagname="" +- fi +- ;; +- +- RC) +- AC_LIBTOOL_LANG_RC_CONFIG +- ;; +- +- *) +- AC_MSG_ERROR([Unsupported tag name: $tagname]) +- ;; +- esac +- +- # Append the new tag name to the list of available tags. +- if test -n "$tagname" ; then +- available_tags="$available_tags $tagname" +- fi +- fi +- done +- IFS="$lt_save_ifs" +- +- # Now substitute the updated list of available tags. +- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then +- mv "${ofile}T" "$ofile" +- chmod +x "$ofile" +- else +- rm -f "${ofile}T" +- AC_MSG_ERROR([unable to update list of available tagged configurations.]) +- fi +-fi +-])# _LT_AC_TAGCONFIG +- +- +-# AC_LIBTOOL_DLOPEN +-# ----------------- +-# enable checks for dlopen support +-AC_DEFUN([AC_LIBTOOL_DLOPEN], +- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) +-])# AC_LIBTOOL_DLOPEN +- +- +-# AC_LIBTOOL_WIN32_DLL +-# -------------------- +-# declare package support for building win32 DLLs +-AC_DEFUN([AC_LIBTOOL_WIN32_DLL], +-[AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) +-])# AC_LIBTOOL_WIN32_DLL +- +- +-# AC_ENABLE_SHARED([DEFAULT]) +-# --------------------------- +-# implement the --enable-shared flag +-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +-AC_DEFUN([AC_ENABLE_SHARED], +-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl +-AC_ARG_ENABLE([shared], +- [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], +- [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], +- [p=${PACKAGE-default} +- case $enableval in +- yes) enable_shared=yes ;; +- no) enable_shared=no ;; +- *) +- enable_shared=no +- # Look at the argument we got. We use all the common list separators. +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for pkg in $enableval; do +- IFS="$lt_save_ifs" +- if test "X$pkg" = "X$p"; then +- enable_shared=yes +- fi +- done +- IFS="$lt_save_ifs" +- ;; +- esac], +- [enable_shared=]AC_ENABLE_SHARED_DEFAULT) +-])# AC_ENABLE_SHARED +- +- +-# AC_DISABLE_SHARED +-# ----------------- +-# set the default shared flag to --disable-shared +-AC_DEFUN([AC_DISABLE_SHARED], +-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +-AC_ENABLE_SHARED(no) +-])# AC_DISABLE_SHARED +- +- +-# AC_ENABLE_STATIC([DEFAULT]) +-# --------------------------- +-# implement the --enable-static flag +-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +-AC_DEFUN([AC_ENABLE_STATIC], +-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl +-AC_ARG_ENABLE([static], +- [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], +- [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], +- [p=${PACKAGE-default} +- case $enableval in +- yes) enable_static=yes ;; +- no) enable_static=no ;; +- *) +- enable_static=no +- # Look at the argument we got. We use all the common list separators. +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for pkg in $enableval; do +- IFS="$lt_save_ifs" +- if test "X$pkg" = "X$p"; then +- enable_static=yes +- fi +- done +- IFS="$lt_save_ifs" +- ;; +- esac], +- [enable_static=]AC_ENABLE_STATIC_DEFAULT) +-])# AC_ENABLE_STATIC +- +- +-# AC_DISABLE_STATIC +-# ----------------- +-# set the default static flag to --disable-static +-AC_DEFUN([AC_DISABLE_STATIC], +-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +-AC_ENABLE_STATIC(no) +-])# AC_DISABLE_STATIC +- +- +-# AC_ENABLE_FAST_INSTALL([DEFAULT]) +-# --------------------------------- +-# implement the --enable-fast-install flag +-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +-AC_DEFUN([AC_ENABLE_FAST_INSTALL], +-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl +-AC_ARG_ENABLE([fast-install], +- [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], +- [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], +- [p=${PACKAGE-default} +- case $enableval in +- yes) enable_fast_install=yes ;; +- no) enable_fast_install=no ;; +- *) +- enable_fast_install=no +- # Look at the argument we got. We use all the common list separators. +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for pkg in $enableval; do +- IFS="$lt_save_ifs" +- if test "X$pkg" = "X$p"; then +- enable_fast_install=yes +- fi +- done +- IFS="$lt_save_ifs" +- ;; +- esac], +- [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) +-])# AC_ENABLE_FAST_INSTALL +- +- +-# AC_DISABLE_FAST_INSTALL +-# ----------------------- +-# set the default to --disable-fast-install +-AC_DEFUN([AC_DISABLE_FAST_INSTALL], +-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +-AC_ENABLE_FAST_INSTALL(no) +-])# AC_DISABLE_FAST_INSTALL +- +- +-# AC_LIBTOOL_PICMODE([MODE]) +-# -------------------------- +-# implement the --with-pic flag +-# MODE is either `yes' or `no'. If omitted, it defaults to `both'. +-AC_DEFUN([AC_LIBTOOL_PICMODE], +-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +-pic_mode=ifelse($#,1,$1,default) +-])# AC_LIBTOOL_PICMODE +- +- +-# AC_PROG_EGREP +-# ------------- +-# This is predefined starting with Autoconf 2.54, so this conditional +-# definition can be removed once we require Autoconf 2.54 or later. +-m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP], +-[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep], +- [if echo a | (grep -E '(a|b)') >/dev/null 2>&1 +- then ac_cv_prog_egrep='grep -E' +- else ac_cv_prog_egrep='egrep' +- fi]) +- EGREP=$ac_cv_prog_egrep +- AC_SUBST([EGREP]) +-])]) +- +- +-# AC_PATH_TOOL_PREFIX +-# ------------------- +-# find a file program which can recognize shared library +-AC_DEFUN([AC_PATH_TOOL_PREFIX], +-[AC_REQUIRE([AC_PROG_EGREP])dnl +-AC_MSG_CHECKING([for $1]) +-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +-[case $MAGIC_CMD in +-[[\\/*] | ?:[\\/]*]) +- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. +- ;; +-*) +- lt_save_MAGIC_CMD="$MAGIC_CMD" +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +-dnl $ac_dummy forces splitting on constant user-supplied paths. +-dnl POSIX.2 word splitting is done only on the output of word expansions, +-dnl not every word. This closes a longstanding sh security hole. +- ac_dummy="ifelse([$2], , $PATH, [$2])" +- for ac_dir in $ac_dummy; do +- IFS="$lt_save_ifs" +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$1; then +- lt_cv_path_MAGIC_CMD="$ac_dir/$1" +- if test -n "$file_magic_test_file"; then +- case $deplibs_check_method in +- "file_magic "*) +- file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` +- MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | +- $EGREP "$file_magic_regex" > /dev/null; then +- : +- else +- cat <&2 +- +-*** Warning: the command libtool uses to detect shared libraries, +-*** $file_magic_cmd, produces output that libtool cannot recognize. +-*** The result is that libtool may fail to recognize shared libraries +-*** as such. This will affect the creation of libtool libraries that +-*** depend on shared libraries, but programs linked with such libtool +-*** libraries will work regardless of this problem. Nevertheless, you +-*** may want to report the problem to your system manager and/or to +-*** bug-libtool@gnu.org +- +-EOF +- fi ;; +- esac +- fi +- break +- fi +- done +- IFS="$lt_save_ifs" +- MAGIC_CMD="$lt_save_MAGIC_CMD" +- ;; +-esac]) +-MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +-if test -n "$MAGIC_CMD"; then +- AC_MSG_RESULT($MAGIC_CMD) +-else +- AC_MSG_RESULT(no) +-fi +-])# AC_PATH_TOOL_PREFIX +- +- +-# AC_PATH_MAGIC +-# ------------- +-# find a file program which can recognize a shared library +-AC_DEFUN([AC_PATH_MAGIC], +-[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) +-if test -z "$lt_cv_path_MAGIC_CMD"; then +- if test -n "$ac_tool_prefix"; then +- AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) +- else +- MAGIC_CMD=: +- fi +-fi +-])# AC_PATH_MAGIC +- +- +-# AC_PROG_LD +-# ---------- +-# find the pathname to the GNU or non-GNU linker +-AC_DEFUN([AC_PROG_LD], +-[AC_ARG_WITH([gnu-ld], +- [AC_HELP_STRING([--with-gnu-ld], +- [assume the C compiler uses GNU ld @<:@default=no@:>@])], +- [test "$withval" = no || with_gnu_ld=yes], +- [with_gnu_ld=no]) +-AC_REQUIRE([LT_AC_PROG_SED])dnl +-AC_REQUIRE([AC_PROG_CC])dnl +-AC_REQUIRE([AC_CANONICAL_HOST])dnl +-AC_REQUIRE([AC_CANONICAL_BUILD])dnl +-ac_prog=ld +-if test "$GCC" = yes; then +- # Check if gcc -print-prog-name=ld gives a path. +- AC_MSG_CHECKING([for ld used by $CC]) +- case $host in +- *-*-mingw*) +- # gcc leaves a trailing carriage return which upsets mingw +- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; +- *) +- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; +- esac +- case $ac_prog in +- # Accept absolute paths. +- [[\\/]]* | ?:[[\\/]]*) +- re_direlt='/[[^/]][[^/]]*/\.\./' +- # Canonicalize the pathname of ld +- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` +- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do +- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` +- done +- test -z "$LD" && LD="$ac_prog" +- ;; +- "") +- # If it fails, then pretend we aren't using GCC. +- ac_prog=ld +- ;; +- *) +- # If it is relative, then search for the first ld in PATH. +- with_gnu_ld=unknown +- ;; +- esac +-elif test "$with_gnu_ld" = yes; then +- AC_MSG_CHECKING([for GNU ld]) +-else +- AC_MSG_CHECKING([for non-GNU ld]) +-fi +-AC_CACHE_VAL(lt_cv_path_LD, +-[if test -z "$LD"; then +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +- for ac_dir in $PATH; do +- IFS="$lt_save_ifs" +- test -z "$ac_dir" && ac_dir=. +- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then +- lt_cv_path_LD="$ac_dir/$ac_prog" +- # Check to see if the program is GNU ld. I'd rather use --version, +- # but apparently some variants of GNU ld only accept -v. +- # Break only if it was the GNU/non-GNU ld that we prefer. +- case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null 2>&1; then +- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' +- lt_cv_file_magic_cmd='func_win32_libid' +- else +- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' +- lt_cv_file_magic_cmd='$OBJDUMP -f' +- fi +- ;; +- +-darwin* | rhapsody*) +- lt_cv_deplibs_check_method=pass_all +- ;; +- +-freebsd* | dragonfly*) +- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then +- case $host_cpu in +- i*86 ) +- # Not sure whether the presence of OpenBSD here was a mistake. +- # Let's accept both of them until this is cleared up. +- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' +- lt_cv_file_magic_cmd=/usr/bin/file +- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` +- ;; +- esac +- else +- lt_cv_deplibs_check_method=pass_all +- fi +- ;; +- +-gnu*) +- lt_cv_deplibs_check_method=pass_all +- ;; +- +-hpux10.20* | hpux11*) +- lt_cv_file_magic_cmd=/usr/bin/file +- case $host_cpu in +- ia64*) +- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' +- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so +- ;; +- hppa*64*) +- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] +- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl +- ;; +- *) +- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' +- lt_cv_file_magic_test_file=/usr/lib/libc.sl +- ;; +- esac +- ;; +- +-interix[[3-9]]*) +- # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here +- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' +- ;; +- +-irix5* | irix6* | nonstopux*) +- case $LD in +- *-32|*"-32 ") libmagic=32-bit;; +- *-n32|*"-n32 ") libmagic=N32;; +- *-64|*"-64 ") libmagic=64-bit;; +- *) libmagic=never-match;; +- esac +- lt_cv_deplibs_check_method=pass_all +- ;; +- +-# This must be Linux ELF. +-linux* | k*bsd*-gnu) +- lt_cv_deplibs_check_method=pass_all +- ;; +- +-netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then +- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' +- else +- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' +- fi +- ;; +- +-newos6*) +- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' +- lt_cv_file_magic_cmd=/usr/bin/file +- lt_cv_file_magic_test_file=/usr/lib/libnls.so +- ;; +- +-nto-qnx*) +- lt_cv_deplibs_check_method=unknown +- ;; +- +-openbsd*) +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' +- else +- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' +- fi +- ;; +- +-osf3* | osf4* | osf5*) +- lt_cv_deplibs_check_method=pass_all +- ;; +- +-rdos*) +- lt_cv_deplibs_check_method=pass_all +- ;; +- +-solaris*) +- lt_cv_deplibs_check_method=pass_all +- ;; +- +-sysv4 | sysv4.3*) +- case $host_vendor in +- motorola) +- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' +- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` +- ;; +- ncr) +- lt_cv_deplibs_check_method=pass_all +- ;; +- sequent) +- lt_cv_file_magic_cmd='/bin/file' +- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' +- ;; +- sni) +- lt_cv_file_magic_cmd='/bin/file' +- lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" +- lt_cv_file_magic_test_file=/lib/libc.so +- ;; +- siemens) +- lt_cv_deplibs_check_method=pass_all +- ;; +- pc) +- lt_cv_deplibs_check_method=pass_all +- ;; +- esac +- ;; +- +-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) +- lt_cv_deplibs_check_method=pass_all +- ;; +-esac +-]) +-file_magic_cmd=$lt_cv_file_magic_cmd +-deplibs_check_method=$lt_cv_deplibs_check_method +-test -z "$deplibs_check_method" && deplibs_check_method=unknown +-])# AC_DEPLIBS_CHECK_METHOD +- +- +-# AC_PROG_NM +-# ---------- +-# find the pathname to a BSD-compatible name lister +-AC_DEFUN([AC_PROG_NM], +-[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, +-[if test -n "$NM"; then +- # Let the user override the test. +- lt_cv_path_NM="$NM" +-else +- lt_nm_to_check="${ac_tool_prefix}nm" +- if test -n "$ac_tool_prefix" && test "$build" = "$host"; then +- lt_nm_to_check="$lt_nm_to_check nm" +- fi +- for lt_tmp_nm in $lt_nm_to_check; do +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +- for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do +- IFS="$lt_save_ifs" +- test -z "$ac_dir" && ac_dir=. +- tmp_nm="$ac_dir/$lt_tmp_nm" +- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then +- # Check to see if the nm accepts a BSD-compat flag. +- # Adding the `sed 1q' prevents false positives on HP-UX, which says: +- # nm: unknown option "B" ignored +- # Tru64's nm complains that /dev/null is an invalid object file +- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in +- */dev/null* | *'Invalid file or object type'*) +- lt_cv_path_NM="$tmp_nm -B" +- break +- ;; +- *) +- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in +- */dev/null*) +- lt_cv_path_NM="$tmp_nm -p" +- break +- ;; +- *) +- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but +- continue # so that we can try to find one that supports BSD flags +- ;; +- esac +- ;; +- esac +- fi +- done +- IFS="$lt_save_ifs" +- done +- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm +-fi]) +-NM="$lt_cv_path_NM" +-])# AC_PROG_NM +- +- +-# AC_CHECK_LIBM +-# ------------- +-# check for math library +-AC_DEFUN([AC_CHECK_LIBM], +-[AC_REQUIRE([AC_CANONICAL_HOST])dnl +-LIBM= +-case $host in +-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) +- # These system don't have libm, or don't need it +- ;; +-*-ncr-sysv4.3*) +- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") +- AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") +- ;; +-*) +- AC_CHECK_LIB(m, cos, LIBM="-lm") +- ;; +-esac +-])# AC_CHECK_LIBM +- +- +-# AC_LIBLTDL_CONVENIENCE([DIRECTORY]) +-# ----------------------------------- +-# sets LIBLTDL to the link flags for the libltdl convenience library and +-# LTDLINCL to the include flags for the libltdl header and adds +-# --enable-ltdl-convenience to the configure arguments. Note that +-# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, +-# it is assumed to be `libltdl'. LIBLTDL will be prefixed with +-# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/' +-# (note the single quotes!). If your package is not flat and you're not +-# using automake, define top_builddir and top_srcdir appropriately in +-# the Makefiles. +-AC_DEFUN([AC_LIBLTDL_CONVENIENCE], +-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +- case $enable_ltdl_convenience in +- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; +- "") enable_ltdl_convenience=yes +- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; +- esac +- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la +- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) +- # For backwards non-gettext consistent compatibility... +- INCLTDL="$LTDLINCL" +-])# AC_LIBLTDL_CONVENIENCE +- +- +-# AC_LIBLTDL_INSTALLABLE([DIRECTORY]) +-# ----------------------------------- +-# sets LIBLTDL to the link flags for the libltdl installable library and +-# LTDLINCL to the include flags for the libltdl header and adds +-# --enable-ltdl-install to the configure arguments. Note that +-# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, +-# and an installed libltdl is not found, it is assumed to be `libltdl'. +-# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with +-# '${top_srcdir}/' (note the single quotes!). If your package is not +-# flat and you're not using automake, define top_builddir and top_srcdir +-# appropriately in the Makefiles. +-# In the future, this macro may have to be called after AC_PROG_LIBTOOL. +-AC_DEFUN([AC_LIBLTDL_INSTALLABLE], +-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +- AC_CHECK_LIB(ltdl, lt_dlinit, +- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], +- [if test x"$enable_ltdl_install" = xno; then +- AC_MSG_WARN([libltdl not installed, but installation disabled]) +- else +- enable_ltdl_install=yes +- fi +- ]) +- if test x"$enable_ltdl_install" = x"yes"; then +- ac_configure_args="$ac_configure_args --enable-ltdl-install" +- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la +- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) +- else +- ac_configure_args="$ac_configure_args --enable-ltdl-install=no" +- LIBLTDL="-lltdl" +- LTDLINCL= +- fi +- # For backwards non-gettext consistent compatibility... +- INCLTDL="$LTDLINCL" +-])# AC_LIBLTDL_INSTALLABLE +- +- +-# AC_LIBTOOL_CXX +-# -------------- +-# enable support for C++ libraries +-AC_DEFUN([AC_LIBTOOL_CXX], +-[AC_REQUIRE([_LT_AC_LANG_CXX]) +-])# AC_LIBTOOL_CXX +- +- +-# _LT_AC_LANG_CXX +-# --------------- +-AC_DEFUN([_LT_AC_LANG_CXX], +-[AC_REQUIRE([AC_PROG_CXX]) +-AC_REQUIRE([_LT_AC_PROG_CXXCPP]) +-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) +-])# _LT_AC_LANG_CXX +- +-# _LT_AC_PROG_CXXCPP +-# ------------------ +-AC_DEFUN([_LT_AC_PROG_CXXCPP], +-[ +-AC_REQUIRE([AC_PROG_CXX]) +-if test -n "$CXX" && ( test "X$CXX" != "Xno" && +- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || +- (test "X$CXX" != "Xg++"))) ; then +- AC_PROG_CXXCPP +-fi +-])# _LT_AC_PROG_CXXCPP +- +-# AC_LIBTOOL_F77 +-# -------------- +-# enable support for Fortran 77 libraries +-AC_DEFUN([AC_LIBTOOL_F77], +-[AC_REQUIRE([_LT_AC_LANG_F77]) +-])# AC_LIBTOOL_F77 +- +- +-# _LT_AC_LANG_F77 +-# --------------- +-AC_DEFUN([_LT_AC_LANG_F77], +-[AC_REQUIRE([AC_PROG_F77]) +-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77]) +-])# _LT_AC_LANG_F77 +- +- +-# AC_LIBTOOL_GCJ +-# -------------- +-# enable support for GCJ libraries +-AC_DEFUN([AC_LIBTOOL_GCJ], +-[AC_REQUIRE([_LT_AC_LANG_GCJ]) +-])# AC_LIBTOOL_GCJ +- +- +-# _LT_AC_LANG_GCJ +-# --------------- +-AC_DEFUN([_LT_AC_LANG_GCJ], +-[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], +- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], +- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], +- [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], +- [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], +- [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) +-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ]) +-])# _LT_AC_LANG_GCJ +- +- +-# AC_LIBTOOL_RC +-# ------------- +-# enable support for Windows resource files +-AC_DEFUN([AC_LIBTOOL_RC], +-[AC_REQUIRE([LT_AC_PROG_RC]) +-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC]) +-])# AC_LIBTOOL_RC +- +- +-# AC_LIBTOOL_LANG_C_CONFIG +-# ------------------------ +-# Ensure that the configuration vars for the C compiler are +-# suitably defined. Those variables are subsequently used by +-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +-AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) +-AC_DEFUN([_LT_AC_LANG_C_CONFIG], +-[lt_save_CC="$CC" +-AC_LANG_PUSH(C) +- +-# Source file extension for C test sources. +-ac_ext=c +- +-# Object file extension for compiled C test sources. +-objext=o +-_LT_AC_TAGVAR(objext, $1)=$objext +- +-# Code to be used in simple compile tests +-lt_simple_compile_test_code="int some_variable = 0;" +- +-# Code to be used in simple link tests +-lt_simple_link_test_code='int main(){return(0);}' +- +-_LT_AC_SYS_COMPILER +- +-# save warnings/boilerplate of simple test code +-_LT_COMPILER_BOILERPLATE +-_LT_LINKER_BOILERPLATE +- +-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) +-AC_LIBTOOL_PROG_COMPILER_PIC($1) +-AC_LIBTOOL_PROG_CC_C_O($1) +-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +-AC_LIBTOOL_PROG_LD_SHLIBS($1) +-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +-AC_LIBTOOL_SYS_LIB_STRIP +-AC_LIBTOOL_DLOPEN_SELF +- +-# Report which library types will actually be built +-AC_MSG_CHECKING([if libtool supports shared libraries]) +-AC_MSG_RESULT([$can_build_shared]) +- +-AC_MSG_CHECKING([whether to build shared libraries]) +-test "$can_build_shared" = "no" && enable_shared=no +- +-# On AIX, shared libraries and static libraries use the same namespace, and +-# are all built from PIC. +-case $host_os in +-aix3*) +- test "$enable_shared" = yes && enable_static=no +- if test -n "$RANLIB"; then +- archive_cmds="$archive_cmds~\$RANLIB \$lib" +- postinstall_cmds='$RANLIB $lib' +- fi +- ;; +- +-aix4* | aix5*) +- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then +- test "$enable_shared" = yes && enable_static=no +- fi +- ;; +-esac +-AC_MSG_RESULT([$enable_shared]) +- +-AC_MSG_CHECKING([whether to build static libraries]) +-# Make sure either enable_shared or enable_static is yes. +-test "$enable_shared" = yes || enable_static=yes +-AC_MSG_RESULT([$enable_static]) +- +-AC_LIBTOOL_CONFIG($1) +- +-AC_LANG_POP +-CC="$lt_save_CC" +-])# AC_LIBTOOL_LANG_C_CONFIG +- +- +-# AC_LIBTOOL_LANG_CXX_CONFIG +-# -------------------------- +-# Ensure that the configuration vars for the C compiler are +-# suitably defined. Those variables are subsequently used by +-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +-AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)]) +-AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], +-[AC_LANG_PUSH(C++) +-AC_REQUIRE([AC_PROG_CXX]) +-AC_REQUIRE([_LT_AC_PROG_CXXCPP]) +- +-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +-_LT_AC_TAGVAR(allow_undefined_flag, $1)= +-_LT_AC_TAGVAR(always_export_symbols, $1)=no +-_LT_AC_TAGVAR(archive_expsym_cmds, $1)= +-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= +-_LT_AC_TAGVAR(hardcode_direct, $1)=no +-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= +-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= +-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no +-_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +-_LT_AC_TAGVAR(hardcode_automatic, $1)=no +-_LT_AC_TAGVAR(module_cmds, $1)= +-_LT_AC_TAGVAR(module_expsym_cmds, $1)= +-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown +-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +-_LT_AC_TAGVAR(no_undefined_flag, $1)= +-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no +- +-# Dependencies to place before and after the object being linked: +-_LT_AC_TAGVAR(predep_objects, $1)= +-_LT_AC_TAGVAR(postdep_objects, $1)= +-_LT_AC_TAGVAR(predeps, $1)= +-_LT_AC_TAGVAR(postdeps, $1)= +-_LT_AC_TAGVAR(compiler_lib_search_path, $1)= +- +-# Source file extension for C++ test sources. +-ac_ext=cpp +- +-# Object file extension for compiled C++ test sources. +-objext=o +-_LT_AC_TAGVAR(objext, $1)=$objext +- +-# Code to be used in simple compile tests +-lt_simple_compile_test_code="int some_variable = 0;" +- +-# Code to be used in simple link tests +-lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' +- +-# ltmain only uses $CC for tagged configurations so make sure $CC is set. +-_LT_AC_SYS_COMPILER +- +-# save warnings/boilerplate of simple test code +-_LT_COMPILER_BOILERPLATE +-_LT_LINKER_BOILERPLATE +- +-# Allow CC to be a program name with arguments. +-lt_save_CC=$CC +-lt_save_LD=$LD +-lt_save_GCC=$GCC +-GCC=$GXX +-lt_save_with_gnu_ld=$with_gnu_ld +-lt_save_path_LD=$lt_cv_path_LD +-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then +- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx +-else +- $as_unset lt_cv_prog_gnu_ld +-fi +-if test -n "${lt_cv_path_LDCXX+set}"; then +- lt_cv_path_LD=$lt_cv_path_LDCXX +-else +- $as_unset lt_cv_path_LD +-fi +-test -z "${LDCXX+set}" || LD=$LDCXX +-CC=${CXX-"c++"} +-compiler=$CC +-_LT_AC_TAGVAR(compiler, $1)=$CC +-_LT_CC_BASENAME([$compiler]) +- +-# We don't want -fno-exception wen compiling C++ code, so set the +-# no_builtin_flag separately +-if test "$GXX" = yes; then +- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' +-else +- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= +-fi +- +-if test "$GXX" = yes; then +- # Set up default GNU C++ configuration +- +- AC_PROG_LD +- +- # Check if GNU C++ uses GNU ld as the underlying linker, since the +- # archiving commands below assume that GNU ld is being used. +- if test "$with_gnu_ld" = yes; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' +- +- # If archive_cmds runs LD, not CC, wlarc should be empty +- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to +- # investigate it a little bit more. (MM) +- wlarc='${wl}' +- +- # ancient GNU ld didn't support --whole-archive et. al. +- if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ +- grep 'no-whole-archive' > /dev/null; then +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- else +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +- fi +- else +- with_gnu_ld=no +- wlarc= +- +- # A generic and very simple default shared library creation +- # command for GNU C++ for the case where it uses the native +- # linker, instead of GNU ld. If possible, this setting should +- # overridden to take advantage of the native linker features on +- # the platform it is being used on. +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' +- fi +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' +- +-else +- GXX=no +- with_gnu_ld=no +- wlarc= +-fi +- +-# PORTME: fill in a description of your system's C++ link characteristics +-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +-_LT_AC_TAGVAR(ld_shlibs, $1)=yes +-case $host_os in +- aix3*) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- aix4* | aix5*) +- if test "$host_cpu" = ia64; then +- # On IA64, the linker does run time linking by default, so we don't +- # have to do anything special. +- aix_use_runtimelinking=no +- exp_sym_flag='-Bexport' +- no_entry_flag="" +- else +- aix_use_runtimelinking=no +- +- # Test if we are trying to use run time linking or normal +- # AIX style linking. If -brtl is somewhere in LDFLAGS, we +- # need to do runtime linking. +- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) +- for ld_flag in $LDFLAGS; do +- case $ld_flag in +- *-brtl*) +- aix_use_runtimelinking=yes +- break +- ;; +- esac +- done +- ;; +- esac +- +- exp_sym_flag='-bexport' +- no_entry_flag='-bnoentry' +- fi +- +- # When large executables or shared objects are built, AIX ld can +- # have problems creating the table of contents. If linking a library +- # or program results in "error TOC overflow" add -mminimal-toc to +- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not +- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. +- +- _LT_AC_TAGVAR(archive_cmds, $1)='' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes +- +- if test "$GXX" = yes; then +- case $host_os in aix4.[[012]]|aix4.[[012]].*) +- # We only want to do this on AIX 4.2 and lower, the check +- # below for broken collect2 doesn't work under 4.3+ +- collect2name=`${CC} -print-prog-name=collect2` +- if test -f "$collect2name" && \ +- strings "$collect2name" | grep resolve_lib_name >/dev/null +- then +- # We have reworked collect2 +- : +- else +- # We have old collect2 +- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported +- # It fails to find uninstalled libraries when the uninstalled +- # path is not listed in the libpath. Setting hardcode_minus_L +- # to unsupported forces relinking +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= +- fi +- ;; +- esac +- shared_flag='-shared' +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag="$shared_flag "'${wl}-G' +- fi +- else +- # not using gcc +- if test "$host_cpu" = ia64; then +- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release +- # chokes on -Wl,-G. The following line is correct: +- shared_flag='-G' +- else +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag='${wl}-G' +- else +- shared_flag='${wl}-bM:SRE' +- fi +- fi +- fi +- +- # It seems that -bexpall does not export symbols beginning with +- # underscore (_), so it is better to generate a list of symbols to export. +- _LT_AC_TAGVAR(always_export_symbols, $1)=yes +- if test "$aix_use_runtimelinking" = yes; then +- # Warning - without using the other runtime loading flags (-brtl), +- # -berok will link without error, but may produce a broken library. +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' +- # Determine the default libpath from the value encoded in an empty executable. +- _LT_AC_SYS_LIBPATH_AIX +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" +- +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" +- else +- if test "$host_cpu" = ia64; then +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" +- else +- # Determine the default libpath from the value encoded in an empty executable. +- _LT_AC_SYS_LIBPATH_AIX +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" +- # Warning - without using the other run time loading flags, +- # -berok will link without error, but may produce a broken library. +- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' +- # Exported symbols can be pulled into shared objects from archives +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes +- # This is similar to how AIX traditionally builds its shared libraries. +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' +- fi +- fi +- ;; +- +- beos*) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported +- # Joseph Beckenbach says some releases of gcc +- # support --undefined. This deserves some investigation. FIXME +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- +- chorus*) +- case $cc_basename in +- *) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- esac +- ;; +- +- cygwin* | mingw* | pw32*) +- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, +- # as there is no search path for DLLs. +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported +- _LT_AC_TAGVAR(always_export_symbols, $1)=no +- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes +- +- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- # If the export-symbols file already is a .def file (1st line +- # is EXPORTS), use it as is; otherwise, prepend... +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +- cp $export_symbols $output_objdir/$soname.def; +- else +- echo EXPORTS > $output_objdir/$soname.def; +- cat $export_symbols >> $output_objdir/$soname.def; +- fi~ +- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- darwin* | rhapsody*) +- case $host_os in +- rhapsody* | darwin1.[[012]]) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' +- ;; +- *) # Darwin 1.3 on +- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' +- else +- case ${MACOSX_DEPLOYMENT_TARGET} in +- 10.[[012]]) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' +- ;; +- 10.*) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' +- ;; +- esac +- fi +- ;; +- esac +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes +- +- if test "$GXX" = yes ; then +- lt_int_apple_cc_single_mod=no +- output_verbose_link_cmd='echo' +- if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then +- lt_int_apple_cc_single_mod=yes +- fi +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- fi +- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- else +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- fi +- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- else +- case $cc_basename in +- xlc*) +- output_verbose_link_cmd='echo' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' +- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- ;; +- *) +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- esac +- fi +- ;; +- +- dgux*) +- case $cc_basename in +- ec++*) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- ghcx*) +- # Green Hills C++ Compiler +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- esac +- ;; +- freebsd[[12]]*) +- # C++ shared libraries reported to be fairly broken before switch to ELF +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- freebsd-elf*) +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- ;; +- freebsd* | dragonfly*) +- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF +- # conventions +- _LT_AC_TAGVAR(ld_shlibs, $1)=yes +- ;; +- gnu*) +- ;; +- hpux9*) +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, +- # but as the default +- # location of the library. +- +- case $cc_basename in +- CC*) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- aCC*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- ;; +- *) +- if test "$GXX" = yes; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- else +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- esac +- ;; +- hpux10*|hpux11*) +- if test $with_gnu_ld = no; then +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- +- case $host_cpu in +- hppa*64*|ia64*) ;; +- *) +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' +- ;; +- esac +- fi +- case $host_cpu in +- hppa*64*|ia64*) +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; +- *) +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, +- # but as the default +- # location of the library. +- ;; +- esac +- +- case $cc_basename in +- CC*) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- aCC*) +- case $host_cpu in +- hppa*64*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- ;; +- ia64*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- ;; +- *) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- ;; +- esac +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- ;; +- *) +- if test "$GXX" = yes; then +- if test $with_gnu_ld = no; then +- case $host_cpu in +- hppa*64*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- ;; +- ia64*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- ;; +- *) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- ;; +- esac +- fi +- else +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- esac +- ;; +- interix[[3-9]]*) +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' +- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. +- # Instead, shared libraries are loaded at an image base (0x10000000 by +- # default) and relocated if they conflict, which is a slow very memory +- # consuming and fragmenting process. To avoid this, we pick a random, +- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link +- # time. Moving up from 0x10000000 also allows more sbrk(2) space. +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' +- ;; +- irix5* | irix6*) +- case $cc_basename in +- CC*) +- # SGI C++ +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- +- # Archives containing C++ object files must be created using +- # "CC -ar", where "CC" is the IRIX C++ compiler. This is +- # necessary to make sure instantiated templates are included +- # in the archive. +- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' +- ;; +- *) +- if test "$GXX" = yes; then +- if test "$with_gnu_ld" = no; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' +- fi +- fi +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes +- ;; +- esac +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- ;; +- linux* | k*bsd*-gnu) +- case $cc_basename in +- KCC*) +- # Kuck and Associates, Inc. (KAI) C++ Compiler +- +- # KCC will only create a shared library if the output file +- # ends with ".so" (or ".sl" for HP-UX), so rename the library +- # to its proper name (with version) after linking. +- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir' +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' +- +- # Archives containing C++ object files must be created using +- # "CC -Bstatic", where "CC" is the KAI C++ compiler. +- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' +- ;; +- icpc*) +- # Intel C++ +- with_gnu_ld=yes +- # version 8.0 and above of icpc choke on multiply defined symbols +- # if we add $predep_objects and $postdep_objects, however 7.1 and +- # earlier do not add the objects themselves. +- case `$CC -V 2>&1` in +- *"Version 7."*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- ;; +- *) # Version 8.0 or newer +- tmp_idyn= +- case $host_cpu in +- ia64*) tmp_idyn=' -i_dynamic';; +- esac +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- ;; +- esac +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' +- ;; +- pgCC*) +- # Portland Group C++ compiler +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' +- +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- ;; +- cxx*) +- # Compaq C++ +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' +- +- runpath_var=LD_RUN_PATH +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- ;; +- *) +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) +- # Sun C++ 5.9 +- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- +- # Not sure whether something based on +- # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 +- # would be better. +- output_verbose_link_cmd='echo' +- +- # Archives containing C++ object files must be created using +- # "CC -xar", where "CC" is the Sun C++ compiler. This is +- # necessary to make sure instantiated templates are included +- # in the archive. +- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' +- ;; +- esac +- ;; +- esac +- ;; +- lynxos*) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- m88k*) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- mvs*) +- case $cc_basename in +- cxx*) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- esac +- ;; +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' +- wlarc= +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- fi +- # Workaround some broken pre-1.5 toolchains +- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' +- ;; +- openbsd2*) +- # C++ shared libraries are fairly broken +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- openbsd*) +- if test -f /usr/libexec/ld.so; then +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- fi +- output_verbose_link_cmd='echo' +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- osf3*) +- case $cc_basename in +- KCC*) +- # Kuck and Associates, Inc. (KAI) C++ Compiler +- +- # KCC will only create a shared library if the output file +- # ends with ".so" (or ".sl" for HP-UX), so rename the library +- # to its proper name (with version) after linking. +- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' +- +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- +- # Archives containing C++ object files must be created using +- # "CC -Bstatic", where "CC" is the KAI C++ compiler. +- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' +- +- ;; +- RCC*) +- # Rational C++ 2.4.1 +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- cxx*) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- ;; +- *) +- if test "$GXX" = yes && test "$with_gnu_ld" = no; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' +- +- else +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- esac +- ;; +- osf4* | osf5*) +- case $cc_basename in +- KCC*) +- # Kuck and Associates, Inc. (KAI) C++ Compiler +- +- # KCC will only create a shared library if the output file +- # ends with ".so" (or ".sl" for HP-UX), so rename the library +- # to its proper name (with version) after linking. +- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' +- +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- +- # Archives containing C++ object files must be created using +- # the KAI C++ compiler. +- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' +- ;; +- RCC*) +- # Rational C++ 2.4.1 +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- cxx*) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ +- echo "-hidden">> $lib.exp~ +- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ +- $rm $lib.exp' +- +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- ;; +- *) +- if test "$GXX" = yes && test "$with_gnu_ld" = no; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' +- +- else +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- esac +- ;; +- psos*) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- sunos4*) +- case $cc_basename in +- CC*) +- # Sun C++ 4.x +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- lcc*) +- # Lucid +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- esac +- ;; +- solaris*) +- case $cc_basename in +- CC*) +- # Sun C++ 4.2, 5.x and Centerline C++ +- _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes +- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' +- +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- case $host_os in +- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; +- *) +- # The compiler driver will combine and reorder linker options, +- # but understands `-z linker_flag'. +- # Supported since Solaris 2.6 (maybe 2.5.1?) +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' +- ;; +- esac +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes +- +- output_verbose_link_cmd='echo' +- +- # Archives containing C++ object files must be created using +- # "CC -xar", where "CC" is the Sun C++ compiler. This is +- # necessary to make sure instantiated templates are included +- # in the archive. +- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' +- ;; +- gcx*) +- # Green Hills C++ Compiler +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' +- +- # The C++ compiler must be used to create the archive. +- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' +- ;; +- *) +- # GNU C++ compiler with Solaris linker +- if test "$GXX" = yes && test "$with_gnu_ld" = no; then +- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' +- if $CC --version | grep -v '^2\.7' > /dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" +- else +- # g++ 2.7 appears to require `-G' NOT `-shared' on this +- # platform. +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" +- fi +- +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' +- case $host_os in +- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; +- *) +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' +- ;; +- esac +- fi +- ;; +- esac +- ;; +- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) +- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- runpath_var='LD_RUN_PATH' +- +- case $cc_basename in +- CC*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- esac +- ;; +- sysv5* | sco3.2v5* | sco5v6*) +- # Note: We can NOT use -z defs as we might desire, because we do not +- # link with -lc, and that would cause any symbols used from libc to +- # always be unresolved, which means just about no library would +- # ever link correctly. If we're not using GNU ld we use -z text +- # though, which does catch some bad symbols but isn't as heavy-handed +- # as -z defs. +- # For security reasons, it is highly recommended that you always +- # use absolute paths for naming shared libraries, and exclude the +- # DT_RUNPATH tag from executables and libraries. But doing so +- # requires that you compile everything twice, which is a pain. +- # So that behaviour is only enabled if SCOABSPATH is set to a +- # non-empty value in the environment. Most likely only useful for +- # creating official distributions of packages. +- # This is a hack until libtool officially supports absolute path +- # names for shared libraries. +- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' +- runpath_var='LD_RUN_PATH' +- +- case $cc_basename in +- CC*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- esac +- ;; +- tandem*) +- case $cc_basename in +- NCC*) +- # NonStop-UX NCC 3.20 +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- esac +- ;; +- vxworks*) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +-esac +-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) +-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no +- +-_LT_AC_TAGVAR(GCC, $1)="$GXX" +-_LT_AC_TAGVAR(LD, $1)="$LD" +- +-AC_LIBTOOL_POSTDEP_PREDEP($1) +-AC_LIBTOOL_PROG_COMPILER_PIC($1) +-AC_LIBTOOL_PROG_CC_C_O($1) +-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +-AC_LIBTOOL_PROG_LD_SHLIBS($1) +-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +- +-AC_LIBTOOL_CONFIG($1) +- +-AC_LANG_POP +-CC=$lt_save_CC +-LDCXX=$LD +-LD=$lt_save_LD +-GCC=$lt_save_GCC +-with_gnu_ldcxx=$with_gnu_ld +-with_gnu_ld=$lt_save_with_gnu_ld +-lt_cv_path_LDCXX=$lt_cv_path_LD +-lt_cv_path_LD=$lt_save_path_LD +-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld +-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +-])# AC_LIBTOOL_LANG_CXX_CONFIG +- +-# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME]) +-# ------------------------------------ +-# Figure out "hidden" library dependencies from verbose +-# compiler output when linking a shared library. +-# Parse the compiler output and extract the necessary +-# objects, libraries and library flags. +-AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[ +-dnl we can't use the lt_simple_compile_test_code here, +-dnl because it contains code intended for an executable, +-dnl not a library. It's possible we should let each +-dnl tag define a new lt_????_link_test_code variable, +-dnl but it's only used here... +-ifelse([$1],[],[cat > conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext <&1 | sed 5q` in +- *Sun\ C*) +- # Sun C++ 5.9 +- # +- # The more standards-conforming stlport4 library is +- # incompatible with the Cstd library. Avoid specifying +- # it if it's in CXXFLAGS. Ignore libCrun as +- # -library=stlport4 depends on it. +- case " $CXX $CXXFLAGS " in +- *" -library=stlport4 "*) +- solaris_use_stlport4=yes +- ;; +- esac +- if test "$solaris_use_stlport4" != yes; then +- _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' +- fi +- ;; +- esac +- ;; +- +-solaris*) +- case $cc_basename in +- CC*) +- # The more standards-conforming stlport4 library is +- # incompatible with the Cstd library. Avoid specifying +- # it if it's in CXXFLAGS. Ignore libCrun as +- # -library=stlport4 depends on it. +- case " $CXX $CXXFLAGS " in +- *" -library=stlport4 "*) +- solaris_use_stlport4=yes +- ;; +- esac +- +- # Adding this requires a known-good setup of shared libraries for +- # Sun compiler versions before 5.6, else PIC objects from an old +- # archive will be linked into the output, leading to subtle bugs. +- if test "$solaris_use_stlport4" != yes; then +- _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' +- fi +- ;; +- esac +- ;; +-esac +-]) +- +-case " $_LT_AC_TAGVAR(postdeps, $1) " in +-*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;; +-esac +-])# AC_LIBTOOL_POSTDEP_PREDEP +- +-# AC_LIBTOOL_LANG_F77_CONFIG +-# -------------------------- +-# Ensure that the configuration vars for the C compiler are +-# suitably defined. Those variables are subsequently used by +-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +-AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)]) +-AC_DEFUN([_LT_AC_LANG_F77_CONFIG], +-[AC_REQUIRE([AC_PROG_F77]) +-AC_LANG_PUSH(Fortran 77) +- +-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +-_LT_AC_TAGVAR(allow_undefined_flag, $1)= +-_LT_AC_TAGVAR(always_export_symbols, $1)=no +-_LT_AC_TAGVAR(archive_expsym_cmds, $1)= +-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= +-_LT_AC_TAGVAR(hardcode_direct, $1)=no +-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= +-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= +-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no +-_LT_AC_TAGVAR(hardcode_automatic, $1)=no +-_LT_AC_TAGVAR(module_cmds, $1)= +-_LT_AC_TAGVAR(module_expsym_cmds, $1)= +-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown +-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +-_LT_AC_TAGVAR(no_undefined_flag, $1)= +-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no +- +-# Source file extension for f77 test sources. +-ac_ext=f +- +-# Object file extension for compiled f77 test sources. +-objext=o +-_LT_AC_TAGVAR(objext, $1)=$objext +- +-# Code to be used in simple compile tests +-lt_simple_compile_test_code="\ +- subroutine t +- return +- end +-" +- +-# Code to be used in simple link tests +-lt_simple_link_test_code="\ +- program t +- end +-" +- +-# ltmain only uses $CC for tagged configurations so make sure $CC is set. +-_LT_AC_SYS_COMPILER +- +-# save warnings/boilerplate of simple test code +-_LT_COMPILER_BOILERPLATE +-_LT_LINKER_BOILERPLATE +- +-# Allow CC to be a program name with arguments. +-lt_save_CC="$CC" +-CC=${F77-"f77"} +-compiler=$CC +-_LT_AC_TAGVAR(compiler, $1)=$CC +-_LT_CC_BASENAME([$compiler]) +- +-AC_MSG_CHECKING([if libtool supports shared libraries]) +-AC_MSG_RESULT([$can_build_shared]) +- +-AC_MSG_CHECKING([whether to build shared libraries]) +-test "$can_build_shared" = "no" && enable_shared=no +- +-# On AIX, shared libraries and static libraries use the same namespace, and +-# are all built from PIC. +-case $host_os in +-aix3*) +- test "$enable_shared" = yes && enable_static=no +- if test -n "$RANLIB"; then +- archive_cmds="$archive_cmds~\$RANLIB \$lib" +- postinstall_cmds='$RANLIB $lib' +- fi +- ;; +-aix4* | aix5*) +- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then +- test "$enable_shared" = yes && enable_static=no +- fi +- ;; +-esac +-AC_MSG_RESULT([$enable_shared]) +- +-AC_MSG_CHECKING([whether to build static libraries]) +-# Make sure either enable_shared or enable_static is yes. +-test "$enable_shared" = yes || enable_static=yes +-AC_MSG_RESULT([$enable_static]) +- +-_LT_AC_TAGVAR(GCC, $1)="$G77" +-_LT_AC_TAGVAR(LD, $1)="$LD" +- +-AC_LIBTOOL_PROG_COMPILER_PIC($1) +-AC_LIBTOOL_PROG_CC_C_O($1) +-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +-AC_LIBTOOL_PROG_LD_SHLIBS($1) +-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +- +-AC_LIBTOOL_CONFIG($1) +- +-AC_LANG_POP +-CC="$lt_save_CC" +-])# AC_LIBTOOL_LANG_F77_CONFIG +- +- +-# AC_LIBTOOL_LANG_GCJ_CONFIG +-# -------------------------- +-# Ensure that the configuration vars for the C compiler are +-# suitably defined. Those variables are subsequently used by +-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +-AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)]) +-AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG], +-[AC_LANG_SAVE +- +-# Source file extension for Java test sources. +-ac_ext=java +- +-# Object file extension for compiled Java test sources. +-objext=o +-_LT_AC_TAGVAR(objext, $1)=$objext +- +-# Code to be used in simple compile tests +-lt_simple_compile_test_code="class foo {}" +- +-# Code to be used in simple link tests +-lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' +- +-# ltmain only uses $CC for tagged configurations so make sure $CC is set. +-_LT_AC_SYS_COMPILER +- +-# save warnings/boilerplate of simple test code +-_LT_COMPILER_BOILERPLATE +-_LT_LINKER_BOILERPLATE +- +-# Allow CC to be a program name with arguments. +-lt_save_CC="$CC" +-CC=${GCJ-"gcj"} +-compiler=$CC +-_LT_AC_TAGVAR(compiler, $1)=$CC +-_LT_CC_BASENAME([$compiler]) +- +-# GCJ did not exist at the time GCC didn't implicitly link libc in. +-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- +-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +- +-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) +-AC_LIBTOOL_PROG_COMPILER_PIC($1) +-AC_LIBTOOL_PROG_CC_C_O($1) +-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +-AC_LIBTOOL_PROG_LD_SHLIBS($1) +-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +- +-AC_LIBTOOL_CONFIG($1) +- +-AC_LANG_RESTORE +-CC="$lt_save_CC" +-])# AC_LIBTOOL_LANG_GCJ_CONFIG +- +- +-# AC_LIBTOOL_LANG_RC_CONFIG +-# ------------------------- +-# Ensure that the configuration vars for the Windows resource compiler are +-# suitably defined. Those variables are subsequently used by +-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +-AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)]) +-AC_DEFUN([_LT_AC_LANG_RC_CONFIG], +-[AC_LANG_SAVE +- +-# Source file extension for RC test sources. +-ac_ext=rc +- +-# Object file extension for compiled RC test sources. +-objext=o +-_LT_AC_TAGVAR(objext, $1)=$objext +- +-# Code to be used in simple compile tests +-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' +- +-# Code to be used in simple link tests +-lt_simple_link_test_code="$lt_simple_compile_test_code" +- +-# ltmain only uses $CC for tagged configurations so make sure $CC is set. +-_LT_AC_SYS_COMPILER +- +-# save warnings/boilerplate of simple test code +-_LT_COMPILER_BOILERPLATE +-_LT_LINKER_BOILERPLATE +- +-# Allow CC to be a program name with arguments. +-lt_save_CC="$CC" +-CC=${RC-"windres"} +-compiler=$CC +-_LT_AC_TAGVAR(compiler, $1)=$CC +-_LT_CC_BASENAME([$compiler]) +-_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes +- +-AC_LIBTOOL_CONFIG($1) +- +-AC_LANG_RESTORE +-CC="$lt_save_CC" +-])# AC_LIBTOOL_LANG_RC_CONFIG +- +- +-# AC_LIBTOOL_CONFIG([TAGNAME]) +-# ---------------------------- +-# If TAGNAME is not passed, then create an initial libtool script +-# with a default configuration from the untagged config vars. Otherwise +-# add code to config.status for appending the configuration named by +-# TAGNAME from the matching tagged config vars. +-AC_DEFUN([AC_LIBTOOL_CONFIG], +-[# The else clause should only fire when bootstrapping the +-# libtool distribution, otherwise you forgot to ship ltmain.sh +-# with your package, and you will get complaints that there are +-# no rules to generate ltmain.sh. +-if test -f "$ltmain"; then +- # See if we are running on zsh, and set the options which allow our commands through +- # without removal of \ escapes. +- if test -n "${ZSH_VERSION+set}" ; then +- setopt NO_GLOB_SUBST +- fi +- # Now quote all the things that may contain metacharacters while being +- # careful not to overquote the AC_SUBSTed values. We take copies of the +- # variables and quote the copies for generation of the libtool script. +- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ +- SED SHELL STRIP \ +- libname_spec library_names_spec soname_spec extract_expsyms_cmds \ +- old_striplib striplib file_magic_cmd finish_cmds finish_eval \ +- deplibs_check_method reload_flag reload_cmds need_locks \ +- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ +- lt_cv_sys_global_symbol_to_c_name_address \ +- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ +- old_postinstall_cmds old_postuninstall_cmds \ +- _LT_AC_TAGVAR(compiler, $1) \ +- _LT_AC_TAGVAR(CC, $1) \ +- _LT_AC_TAGVAR(LD, $1) \ +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \ +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \ +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \ +- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \ +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \ +- _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \ +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \ +- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \ +- _LT_AC_TAGVAR(old_archive_cmds, $1) \ +- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \ +- _LT_AC_TAGVAR(predep_objects, $1) \ +- _LT_AC_TAGVAR(postdep_objects, $1) \ +- _LT_AC_TAGVAR(predeps, $1) \ +- _LT_AC_TAGVAR(postdeps, $1) \ +- _LT_AC_TAGVAR(compiler_lib_search_path, $1) \ +- _LT_AC_TAGVAR(archive_cmds, $1) \ +- _LT_AC_TAGVAR(archive_expsym_cmds, $1) \ +- _LT_AC_TAGVAR(postinstall_cmds, $1) \ +- _LT_AC_TAGVAR(postuninstall_cmds, $1) \ +- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \ +- _LT_AC_TAGVAR(allow_undefined_flag, $1) \ +- _LT_AC_TAGVAR(no_undefined_flag, $1) \ +- _LT_AC_TAGVAR(export_symbols_cmds, $1) \ +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \ +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \ +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \ +- _LT_AC_TAGVAR(hardcode_automatic, $1) \ +- _LT_AC_TAGVAR(module_cmds, $1) \ +- _LT_AC_TAGVAR(module_expsym_cmds, $1) \ +- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \ +- _LT_AC_TAGVAR(fix_srcfile_path, $1) \ +- _LT_AC_TAGVAR(exclude_expsyms, $1) \ +- _LT_AC_TAGVAR(include_expsyms, $1); do +- +- case $var in +- _LT_AC_TAGVAR(old_archive_cmds, $1) | \ +- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \ +- _LT_AC_TAGVAR(archive_cmds, $1) | \ +- _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \ +- _LT_AC_TAGVAR(module_cmds, $1) | \ +- _LT_AC_TAGVAR(module_expsym_cmds, $1) | \ +- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \ +- _LT_AC_TAGVAR(export_symbols_cmds, $1) | \ +- extract_expsyms_cmds | reload_cmds | finish_cmds | \ +- postinstall_cmds | postuninstall_cmds | \ +- old_postinstall_cmds | old_postuninstall_cmds | \ +- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) +- # Double-quote double-evaled strings. +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" +- ;; +- *) +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" +- ;; +- esac +- done +- +- case $lt_echo in +- *'\[$]0 --fallback-echo"') +- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'` +- ;; +- esac +- +-ifelse([$1], [], +- [cfgfile="${ofile}T" +- trap "$rm \"$cfgfile\"; exit 1" 1 2 15 +- $rm -f "$cfgfile" +- AC_MSG_NOTICE([creating $ofile])], +- [cfgfile="$ofile"]) +- +- cat <<__EOF__ >> "$cfgfile" +-ifelse([$1], [], +-[#! $SHELL +- +-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +-# NOTE: Changes made to this file will be lost: look at ltmain.sh. +-# +-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 +-# Free Software Foundation, Inc. +-# +-# This file is part of GNU Libtool: +-# Originally by Gordon Matzigkeit , 1996 +-# +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2 of the License, or +-# (at your option) any later version. +-# +-# This program is distributed in the hope that it will be useful, but +-# WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +-# General Public License for more details. +-# +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +-# +-# As a special exception to the GNU General Public License, if you +-# distribute this file as part of a program that contains a +-# configuration script generated by Autoconf, you may include it under +-# the same distribution terms that you use for the rest of that program. +- +-# A sed program that does not truncate output. +-SED=$lt_SED +- +-# Sed that helps us avoid accidentally triggering echo(1) options like -n. +-Xsed="$SED -e 1s/^X//" +- +-# The HP-UX ksh and POSIX shell print the target directory to stdout +-# if CDPATH is set. +-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH +- +-# The names of the tagged configurations supported by this script. +-available_tags= +- +-# ### BEGIN LIBTOOL CONFIG], +-[# ### BEGIN LIBTOOL TAG CONFIG: $tagname]) +- +-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +- +-# Shell to use when invoking shell scripts. +-SHELL=$lt_SHELL +- +-# Whether or not to build shared libraries. +-build_libtool_libs=$enable_shared +- +-# Whether or not to build static libraries. +-build_old_libs=$enable_static +- +-# Whether or not to add -lc for building shared libraries. +-build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1) +- +-# Whether or not to disallow shared libs when runtime libs are static +-allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) +- +-# Whether or not to optimize for fast installation. +-fast_install=$enable_fast_install +- +-# The host system. +-host_alias=$host_alias +-host=$host +-host_os=$host_os +- +-# The build system. +-build_alias=$build_alias +-build=$build +-build_os=$build_os +- +-# An echo program that does not interpret backslashes. +-echo=$lt_echo +- +-# The archiver. +-AR=$lt_AR +-AR_FLAGS=$lt_AR_FLAGS +- +-# A C compiler. +-LTCC=$lt_LTCC +- +-# LTCC compiler flags. +-LTCFLAGS=$lt_LTCFLAGS +- +-# A language-specific compiler. +-CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) +- +-# Is the compiler the GNU C compiler? +-with_gcc=$_LT_AC_TAGVAR(GCC, $1) +- +-# An ERE matcher. +-EGREP=$lt_EGREP +- +-# The linker used to build libraries. +-LD=$lt_[]_LT_AC_TAGVAR(LD, $1) +- +-# Whether we need hard or soft links. +-LN_S=$lt_LN_S +- +-# A BSD-compatible nm program. +-NM=$lt_NM +- +-# A symbol stripping program +-STRIP=$lt_STRIP +- +-# Used to examine libraries when file_magic_cmd begins "file" +-MAGIC_CMD=$MAGIC_CMD +- +-# Used on cygwin: DLL creation program. +-DLLTOOL="$DLLTOOL" +- +-# Used on cygwin: object dumper. +-OBJDUMP="$OBJDUMP" +- +-# Used on cygwin: assembler. +-AS="$AS" +- +-# The name of the directory that contains temporary libtool files. +-objdir=$objdir +- +-# How to create reloadable object files. +-reload_flag=$lt_reload_flag +-reload_cmds=$lt_reload_cmds +- +-# How to pass a linker flag through the compiler. +-wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) +- +-# Object file suffix (normally "o"). +-objext="$ac_objext" +- +-# Old archive suffix (normally "a"). +-libext="$libext" +- +-# Shared library suffix (normally ".so"). +-shrext_cmds='$shrext_cmds' +- +-# Executable file suffix (normally ""). +-exeext="$exeext" +- +-# Additional compiler flags for building library objects. +-pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) +-pic_mode=$pic_mode +- +-# What is the maximum length of a command? +-max_cmd_len=$lt_cv_sys_max_cmd_len +- +-# Does compiler simultaneously support -c and -o options? +-compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) +- +-# Must we lock files when doing compilation? +-need_locks=$lt_need_locks +- +-# Do we need the lib prefix for modules? +-need_lib_prefix=$need_lib_prefix +- +-# Do we need a version for libraries? +-need_version=$need_version +- +-# Whether dlopen is supported. +-dlopen_support=$enable_dlopen +- +-# Whether dlopen of programs is supported. +-dlopen_self=$enable_dlopen_self +- +-# Whether dlopen of statically linked programs is supported. +-dlopen_self_static=$enable_dlopen_self_static +- +-# Compiler flag to prevent dynamic linking. +-link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1) +- +-# Compiler flag to turn off builtin functions. +-no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) +- +-# Compiler flag to allow reflexive dlopens. +-export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) +- +-# Compiler flag to generate shared objects directly from archives. +-whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1) +- +-# Compiler flag to generate thread-safe objects. +-thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1) +- +-# Library versioning type. +-version_type=$version_type +- +-# Format of library name prefix. +-libname_spec=$lt_libname_spec +- +-# List of archive names. First name is the real one, the rest are links. +-# The last name is the one that the linker finds with -lNAME. +-library_names_spec=$lt_library_names_spec +- +-# The coded name of the library, if different from the real name. +-soname_spec=$lt_soname_spec +- +-# Commands used to build and install an old-style archive. +-RANLIB=$lt_RANLIB +-old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1) +-old_postinstall_cmds=$lt_old_postinstall_cmds +-old_postuninstall_cmds=$lt_old_postuninstall_cmds +- +-# Create an old-style archive from a shared archive. +-old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) +- +-# Create a temporary old-style archive to link instead of a shared archive. +-old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) +- +-# Commands used to build and install a shared archive. +-archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1) +-archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1) +-postinstall_cmds=$lt_postinstall_cmds +-postuninstall_cmds=$lt_postuninstall_cmds +- +-# Commands used to build a loadable module (assumed same as above if empty) +-module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1) +-module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1) +- +-# Commands to strip libraries. +-old_striplib=$lt_old_striplib +-striplib=$lt_striplib +- +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1) +- +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1) +- +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1) +- +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) +- +-# The library search path used internally by the compiler when linking +-# a shared library. +-compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) +- +-# Method to check whether dependent libraries are shared objects. +-deplibs_check_method=$lt_deplibs_check_method +- +-# Command to use when deplibs_check_method == file_magic. +-file_magic_cmd=$lt_file_magic_cmd +- +-# Flag that allows shared libraries with undefined symbols to be built. +-allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1) +- +-# Flag that forces no undefined symbols. +-no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1) +- +-# Commands used to finish a libtool library installation in a directory. +-finish_cmds=$lt_finish_cmds +- +-# Same as above, but a single script fragment to be evaled but not shown. +-finish_eval=$lt_finish_eval +- +-# Take the output of nm and produce a listing of raw symbols and C names. +-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe +- +-# Transform the output of nm in a proper C declaration +-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl +- +-# Transform the output of nm in a C name address pair +-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address +- +-# This is the shared library runtime path variable. +-runpath_var=$runpath_var +- +-# This is the shared library path variable. +-shlibpath_var=$shlibpath_var +- +-# Is shlibpath searched before the hard-coded library search path? +-shlibpath_overrides_runpath=$shlibpath_overrides_runpath +- +-# How to hardcode a shared library path into an executable. +-hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) +- +-# Whether we should hardcode library paths into libraries. +-hardcode_into_libs=$hardcode_into_libs +- +-# Flag to hardcode \$libdir into a binary during linking. +-# This must work even if \$libdir does not exist. +-hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) +- +-# If ld is used when linking, flag to hardcode \$libdir into +-# a binary during linking. This must work even if \$libdir does +-# not exist. +-hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) +- +-# Whether we need a single -rpath flag with a separated argument. +-hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) +- +-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +-# resulting binary. +-hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1) +- +-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +-# resulting binary. +-hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1) +- +-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +-# the resulting binary. +-hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1) +- +-# Set to yes if building a shared library automatically hardcodes DIR into the library +-# and all subsequent libraries and executables linked against it. +-hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1) +- +-# Variables whose values should be saved in libtool wrapper scripts and +-# restored at relink time. +-variables_saved_for_relink="$variables_saved_for_relink" +- +-# Whether libtool must link a program against all its dependency libraries. +-link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) +- +-# Compile-time system search path for libraries +-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec +- +-# Run-time system search path for libraries +-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec +- +-# Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path=$lt_fix_srcfile_path +- +-# Set to yes if exported symbols are required. +-always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) +- +-# The commands to list exported symbols. +-export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1) +- +-# The commands to extract the exported symbol list from a shared archive. +-extract_expsyms_cmds=$lt_extract_expsyms_cmds +- +-# Symbols that should not be listed in the preloaded symbols. +-exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1) +- +-# Symbols that must always be exported. +-include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1) +- +-ifelse([$1],[], +-[# ### END LIBTOOL CONFIG], +-[# ### END LIBTOOL TAG CONFIG: $tagname]) +- +-__EOF__ +- +-ifelse([$1],[], [ +- case $host_os in +- aix3*) +- cat <<\EOF >> "$cfgfile" +- +-# AIX sometimes has problems with the GCC collect2 program. For some +-# reason, if we set the COLLECT_NAMES environment variable, the problems +-# vanish in a puff of smoke. +-if test "X${COLLECT_NAMES+set}" != Xset; then +- COLLECT_NAMES= +- export COLLECT_NAMES +-fi +-EOF +- ;; +- esac +- +- # We use sed instead of cat because bash on DJGPP gets confused if +- # if finds mixed CR/LF and LF-only lines. Since sed operates in +- # text mode, it properly converts lines to CR/LF. This bash problem +- # is reportedly fixed, but why not run on old versions too? +- sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) +- +- mv -f "$cfgfile" "$ofile" || \ +- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") +- chmod +x "$ofile" +-]) +-else +- # If there is no Makefile yet, we rely on a make rule to execute +- # `config.status --recheck' to rerun these tests and create the +- # libtool script then. +- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` +- if test -f "$ltmain_in"; then +- test -f Makefile && make "$ltmain" +- fi +-fi +-])# AC_LIBTOOL_CONFIG +- +- +-# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME]) +-# ------------------------------------------- +-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], +-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl +- +-_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= +- +-if test "$GCC" = yes; then +- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' +- +- AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], +- lt_cv_prog_compiler_rtti_exceptions, +- [-fno-rtti -fno-exceptions], [], +- [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) +-fi +-])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI +- +- +-# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +-# --------------------------------- +-AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], +-[AC_REQUIRE([AC_CANONICAL_HOST]) +-AC_REQUIRE([LT_AC_PROG_SED]) +-AC_REQUIRE([AC_PROG_NM]) +-AC_REQUIRE([AC_OBJEXT]) +-# Check for command to grab the raw symbol name followed by C symbol from nm. +-AC_MSG_CHECKING([command to parse $NM output from $compiler object]) +-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], +-[ +-# These are sane defaults that work on at least a few old systems. +-# [They come from Ultrix. What could be older than Ultrix?!! ;)] +- +-# Character class describing NM global symbol codes. +-symcode='[[BCDEGRST]]' +- +-# Regexp to match symbols that can be accessed directly from C. +-sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' +- +-# Transform an extracted symbol line into a proper C declaration +-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" +- +-# Transform an extracted symbol line into symbol name and symbol address +-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" +- +-# Define system-specific variables. +-case $host_os in +-aix*) +- symcode='[[BCDT]]' +- ;; +-cygwin* | mingw* | pw32*) +- symcode='[[ABCDGISTW]]' +- ;; +-hpux*) # Its linker distinguishes data from code symbols +- if test "$host_cpu" = ia64; then +- symcode='[[ABCDEGRST]]' +- fi +- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" +- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" +- ;; +-linux* | k*bsd*-gnu) +- if test "$host_cpu" = ia64; then +- symcode='[[ABCDGIRSTW]]' +- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" +- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" +- fi +- ;; +-irix* | nonstopux*) +- symcode='[[BCDEGRST]]' +- ;; +-osf*) +- symcode='[[BCDEGQRST]]' +- ;; +-solaris*) +- symcode='[[BDRT]]' +- ;; +-sco3.2v5*) +- symcode='[[DT]]' +- ;; +-sysv4.2uw2*) +- symcode='[[DT]]' +- ;; +-sysv5* | sco5v6* | unixware* | OpenUNIX*) +- symcode='[[ABDT]]' +- ;; +-sysv4) +- symcode='[[DFNSTU]]' +- ;; +-esac +- +-# Handle CRLF in mingw tool chain +-opt_cr= +-case $build_os in +-mingw*) +- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp +- ;; +-esac +- +-# If we're using GNU nm, then use its standard symbol codes. +-case `$NM -V 2>&1` in +-*GNU* | *'with BFD'*) +- symcode='[[ABCDGIRSTW]]' ;; +-esac +- +-# Try without a prefix undercore, then with it. +-for ac_symprfx in "" "_"; do +- +- # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. +- symxfrm="\\1 $ac_symprfx\\2 \\2" +- +- # Write the raw and C identifiers. +- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" +- +- # Check to see that the pipe works correctly. +- pipe_works=no +- +- rm -f conftest* +- cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then +- # Try sorting and uniquifying the output. +- if sort "$nlist" | uniq > "$nlist"T; then +- mv -f "$nlist"T "$nlist" +- else +- rm -f "$nlist"T +- fi +- +- # Make sure that we snagged all the symbols we need. +- if grep ' nm_test_var$' "$nlist" >/dev/null; then +- if grep ' nm_test_func$' "$nlist" >/dev/null; then +- cat < conftest.$ac_ext +-#ifdef __cplusplus +-extern "C" { +-#endif +- +-EOF +- # Now generate the symbol file. +- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' +- +- cat <> conftest.$ac_ext +-#if defined (__STDC__) && __STDC__ +-# define lt_ptr_t void * +-#else +-# define lt_ptr_t char * +-# define const +-#endif +- +-/* The mapping between symbol names and symbols. */ +-const struct { +- const char *name; +- lt_ptr_t address; +-} +-lt_preloaded_symbols[[]] = +-{ +-EOF +- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext +- cat <<\EOF >> conftest.$ac_ext +- {0, (lt_ptr_t) 0} +-}; +- +-#ifdef __cplusplus +-} +-#endif +-EOF +- # Now try linking the two files. +- mv conftest.$ac_objext conftstm.$ac_objext +- lt_save_LIBS="$LIBS" +- lt_save_CFLAGS="$CFLAGS" +- LIBS="conftstm.$ac_objext" +- CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" +- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then +- pipe_works=yes +- fi +- LIBS="$lt_save_LIBS" +- CFLAGS="$lt_save_CFLAGS" +- else +- echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD +- fi +- else +- echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD +- fi +- else +- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD +- fi +- else +- echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD +- cat conftest.$ac_ext >&5 +- fi +- rm -f conftest* conftst* +- +- # Do not use the global_symbol_pipe unless it works. +- if test "$pipe_works" = yes; then +- break +- else +- lt_cv_sys_global_symbol_pipe= +- fi +-done +-]) +-if test -z "$lt_cv_sys_global_symbol_pipe"; then +- lt_cv_sys_global_symbol_to_cdecl= +-fi +-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then +- AC_MSG_RESULT(failed) +-else +- AC_MSG_RESULT(ok) +-fi +-]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +- +- +-# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME]) +-# --------------------------------------- +-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], +-[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)= +-_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +-_LT_AC_TAGVAR(lt_prog_compiler_static, $1)= +- +-AC_MSG_CHECKING([for $compiler option to produce PIC]) +- ifelse([$1],[CXX],[ +- # C++ specific cases for pic, static, wl, etc. +- if test "$GXX" = yes; then +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' +- +- case $host_os in +- aix*) +- # All AIX code is PIC. +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- fi +- ;; +- amigaos*) +- # FIXME: we need at least 68020 code to build shared libraries, but +- # adding the `-m68020' flag to GCC prevents building anything better, +- # like `-m68040'. +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' +- ;; +- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) +- # PIC is the default for these OSes. +- ;; +- mingw* | cygwin* | os2* | pw32*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- # Although the cygwin gcc ignores -fPIC, still need this for old-style +- # (--disable-auto-import) libraries +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' +- ;; +- darwin* | rhapsody*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' +- ;; +- *djgpp*) +- # DJGPP does not support shared libraries at all +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +- ;; +- interix[[3-9]]*) +- # Interix 3.x gcc -fpic/-fPIC options generate broken code. +- # Instead, we relocate shared libraries at runtime. +- ;; +- sysv4*MP*) +- if test -d /usr/nec; then +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic +- fi +- ;; +- hpux*) +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case $host_cpu in +- hppa*64*|ia64*) +- ;; +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' +- ;; +- esac +- ;; +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' +- ;; +- esac +- else +- case $host_os in +- aix4* | aix5*) +- # All AIX code is PIC. +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- else +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' +- fi +- ;; +- chorus*) +- case $cc_basename in +- cxch68*) +- # Green Hills C++ Compiler +- # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" +- ;; +- esac +- ;; +- darwin*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- case $cc_basename in +- xlc*) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- ;; +- esac +- ;; +- dgux*) +- case $cc_basename in +- ec++*) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- ;; +- ghcx*) +- # Green Hills C++ Compiler +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' +- ;; +- *) +- ;; +- esac +- ;; +- freebsd* | dragonfly*) +- # FreeBSD uses GNU C++ +- ;; +- hpux9* | hpux10* | hpux11*) +- case $cc_basename in +- CC*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' +- if test "$host_cpu" != ia64; then +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' +- fi +- ;; +- aCC*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' +- case $host_cpu in +- hppa*64*|ia64*) +- # +Z the default +- ;; +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' +- ;; +- esac +- ;; +- *) +- ;; +- esac +- ;; +- interix*) +- # This is c89, which is MS Visual C++ (no shared libs) +- # Anyone wants to do a port? +- ;; +- irix5* | irix6* | nonstopux*) +- case $cc_basename in +- CC*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' +- # CC pic flag -KPIC is the default. +- ;; +- *) +- ;; +- esac +- ;; +- linux* | k*bsd*-gnu) +- case $cc_basename in +- KCC*) +- # KAI C++ Compiler +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' +- ;; +- icpc* | ecpc*) +- # Intel C++ +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' +- ;; +- pgCC*) +- # Portland Group C++ compiler. +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; +- cxx*) +- # Compaq C++ +- # Make sure the PIC flag is empty. It appears that all Alpha +- # Linux and Compaq Tru64 Unix objects are PIC. +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' +- ;; +- *) +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) +- # Sun C++ 5.9 +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' +- ;; +- esac +- ;; +- esac +- ;; +- lynxos*) +- ;; +- m88k*) +- ;; +- mvs*) +- case $cc_basename in +- cxx*) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' +- ;; +- *) +- ;; +- esac +- ;; +- netbsd*) +- ;; +- osf3* | osf4* | osf5*) +- case $cc_basename in +- KCC*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' +- ;; +- RCC*) +- # Rational C++ 2.4.1 +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' +- ;; +- cxx*) +- # Digital/Compaq C++ +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- # Make sure the PIC flag is empty. It appears that all Alpha +- # Linux and Compaq Tru64 Unix objects are PIC. +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' +- ;; +- *) +- ;; +- esac +- ;; +- psos*) +- ;; +- solaris*) +- case $cc_basename in +- CC*) +- # Sun C++ 4.2, 5.x and Centerline C++ +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' +- ;; +- gcx*) +- # Green Hills C++ Compiler +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' +- ;; +- *) +- ;; +- esac +- ;; +- sunos4*) +- case $cc_basename in +- CC*) +- # Sun C++ 4.x +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; +- lcc*) +- # Lucid +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' +- ;; +- *) +- ;; +- esac +- ;; +- tandem*) +- case $cc_basename in +- NCC*) +- # NonStop-UX NCC 3.20 +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- ;; +- *) +- ;; +- esac +- ;; +- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) +- case $cc_basename in +- CC*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; +- esac +- ;; +- vxworks*) +- ;; +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no +- ;; +- esac +- fi +-], +-[ +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' +- +- case $host_os in +- aix*) +- # All AIX code is PIC. +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- fi +- ;; +- +- amigaos*) +- # FIXME: we need at least 68020 code to build shared libraries, but +- # adding the `-m68020' flag to GCC prevents building anything better, +- # like `-m68040'. +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' +- ;; +- +- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) +- # PIC is the default for these OSes. +- ;; +- +- mingw* | cygwin* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- # Although the cygwin gcc ignores -fPIC, still need this for old-style +- # (--disable-auto-import) libraries +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' +- ;; +- +- darwin* | rhapsody*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' +- ;; +- +- interix[[3-9]]*) +- # Interix 3.x gcc -fpic/-fPIC options generate broken code. +- # Instead, we relocate shared libraries at runtime. +- ;; +- +- msdosdjgpp*) +- # Just because we use GCC doesn't mean we suddenly get shared libraries +- # on systems that don't support them. +- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no +- enable_shared=no +- ;; +- +- sysv4*MP*) +- if test -d /usr/nec; then +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic +- fi +- ;; +- +- hpux*) +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case $host_cpu in +- hppa*64*|ia64*) +- # +Z the default +- ;; +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' +- ;; +- esac +- ;; +- +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' +- ;; +- esac +- else +- # PORTME Check for flag to pass linker flags through the system compiler. +- case $host_os in +- aix*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- else +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' +- fi +- ;; +- darwin*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- case $cc_basename in +- xlc*) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- ;; +- esac +- ;; +- +- mingw* | cygwin* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' +- ;; +- +- hpux9* | hpux10* | hpux11*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case $host_cpu in +- hppa*64*|ia64*) +- # +Z the default +- ;; +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' +- ;; +- esac +- # Is there a better lt_prog_compiler_static that works with the bundled CC? +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' +- ;; +- +- irix5* | irix6* | nonstopux*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- # PIC (with -KPIC) is the default. +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' +- ;; +- +- newsos6) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; +- +- linux* | k*bsd*-gnu) +- case $cc_basename in +- icc* | ecc*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' +- ;; +- pgcc* | pgf77* | pgf90* | pgf95*) +- # Portland Group compilers (*not* the Pentium gcc compiler, +- # which looks to be a dead project) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; +- ccc*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- # All Alpha code is PIC. +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' +- ;; +- *) +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) +- # Sun C 5.9 +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- ;; +- *Sun\ F*) +- # Sun Fortran 8.3 passes all unrecognized flags to the linker +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='' +- ;; +- esac +- ;; +- esac +- ;; +- +- osf3* | osf4* | osf5*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- # All OSF/1 code is PIC. +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' +- ;; +- +- rdos*) +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' +- ;; +- +- solaris*) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- case $cc_basename in +- f77* | f90* | f95*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; +- esac +- ;; +- +- sunos4*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; +- +- sysv4 | sysv4.2uw2* | sysv4.3*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; +- +- sysv4*MP*) +- if test -d /usr/nec ;then +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- fi +- ;; +- +- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; +- +- unicos*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no +- ;; +- +- uts4*) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; +- +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no +- ;; +- esac +- fi +-]) +-AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) +- +-# +-# Check to make sure the PIC flag actually works. +-# +-if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then +- AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], +- _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1), +- [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [], +- [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in +- "" | " "*) ;; +- *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; +- esac], +- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +-fi +-case $host_os in +- # For platforms which do not support PIC, -DPIC is meaningless: +- *djgpp*) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +- ;; +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" +- ;; +-esac +- +-# +-# Check to make sure the static flag actually works. +-# +-wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\" +-AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], +- _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1), +- $lt_tmp_static_flag, +- [], +- [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) +-]) +- +- +-# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) +-# ------------------------------------ +-# See if the linker supports building shared libraries. +-AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], +-[AC_REQUIRE([LT_AC_PROG_SED])dnl +-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +-ifelse([$1],[CXX],[ +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- case $host_os in +- aix4* | aix5*) +- # If we're using GNU nm, then we don't want the "-C" option. +- # -C means demangle to AIX nm, but means don't demangle with GNU nm +- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' +- else +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' +- fi +- ;; +- pw32*) +- _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" +- ;; +- cygwin* | mingw*) +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' +- ;; +- *) +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- ;; +- esac +-],[ +- runpath_var= +- _LT_AC_TAGVAR(allow_undefined_flag, $1)= +- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no +- _LT_AC_TAGVAR(archive_cmds, $1)= +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)= +- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= +- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +- _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +- _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown +- _LT_AC_TAGVAR(hardcode_automatic, $1)=no +- _LT_AC_TAGVAR(module_cmds, $1)= +- _LT_AC_TAGVAR(module_expsym_cmds, $1)= +- _LT_AC_TAGVAR(always_export_symbols, $1)=no +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- # include_expsyms should be a list of space-separated symbols to be *always* +- # included in the symbol list +- _LT_AC_TAGVAR(include_expsyms, $1)= +- # exclude_expsyms can be an extended regexp of symbols to exclude +- # it will be wrapped by ` (' and `)$', so one must not match beginning or +- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', +- # as well as any symbol that contains `d'. +- _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_" +- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out +- # platforms (ab)use it in PIC code, but their linkers get confused if +- # the symbol is explicitly referenced. Since portable code cannot +- # rely on this symbol name, it's probably fine to never include it in +- # preloaded symbol tables. +- extract_expsyms_cmds= +- # Just being paranoid about ensuring that cc_basename is set. +- _LT_CC_BASENAME([$compiler]) +- case $host_os in +- cygwin* | mingw* | pw32*) +- # FIXME: the MSVC++ port hasn't been tested in a loooong time +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- if test "$GCC" != yes; then +- with_gnu_ld=no +- fi +- ;; +- interix*) +- # we just hope/assume this is gcc and not c89 (= MSVC++) +- with_gnu_ld=yes +- ;; +- openbsd*) +- with_gnu_ld=no +- ;; +- esac +- +- _LT_AC_TAGVAR(ld_shlibs, $1)=yes +- if test "$with_gnu_ld" = yes; then +- # If archive_cmds runs LD, not CC, wlarc should be empty +- wlarc='${wl}' +- +- # Set some defaults for GNU ld with shared library support. These +- # are reset later if shared libraries are not supported. Putting them +- # here allows them to be overridden if necessary. +- runpath_var=LD_RUN_PATH +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' +- # ancient GNU ld didn't support --whole-archive et. al. +- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- else +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +- fi +- supports_anon_versioning=no +- case `$LD -v 2>/dev/null` in +- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 +- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... +- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... +- *\ 2.11.*) ;; # other 2.11 versions +- *) supports_anon_versioning=yes ;; +- esac +- +- # See if GNU ld supports shared libraries. +- case $host_os in +- aix3* | aix4* | aix5*) +- # On AIX/PPC, the GNU linker is very broken +- if test "$host_cpu" != ia64; then +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- cat <&2 +- +-*** Warning: the GNU linker, at least up to release 2.9.1, is reported +-*** to be unable to reliably create shared libraries on AIX. +-*** Therefore, libtool is disabling shared libraries support. If you +-*** really care for shared libraries, you may want to modify your PATH +-*** so that a non-GNU linker is found, and then restart. +- +-EOF +- fi +- ;; +- +- amigaos*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- +- # Samuel A. Falvo II reports +- # that the semantics of dynamic libraries on AmigaOS, at least up +- # to version 4, is to share data among multiple programs linked +- # with the same dynamic library. Since this doesn't match the +- # behavior of shared libraries on other platforms, we can't use +- # them. +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- +- beos*) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported +- # Joseph Beckenbach says some releases of gcc +- # support --undefined. This deserves some investigation. FIXME +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- +- cygwin* | mingw* | pw32*) +- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, +- # as there is no search path for DLLs. +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported +- _LT_AC_TAGVAR(always_export_symbols, $1)=no +- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' +- +- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- # If the export-symbols file already is a .def file (1st line +- # is EXPORTS), use it as is; otherwise, prepend... +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +- cp $export_symbols $output_objdir/$soname.def; +- else +- echo EXPORTS > $output_objdir/$soname.def; +- cat $export_symbols >> $output_objdir/$soname.def; +- fi~ +- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- +- interix[[3-9]]*) +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' +- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. +- # Instead, shared libraries are loaded at an image base (0x10000000 by +- # default) and relocated if they conflict, which is a slow very memory +- # consuming and fragmenting process. To avoid this, we pick a random, +- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link +- # time. Moving up from 0x10000000 also allows more sbrk(2) space. +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' +- ;; +- +- gnu* | linux* | k*bsd*-gnu) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- tmp_addflag= +- case $cc_basename,$host_cpu in +- pgcc*) # Portland Group C compiler +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- tmp_addflag=' $pic_flag' +- ;; +- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- tmp_addflag=' $pic_flag -Mnomain' ;; +- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 +- tmp_addflag=' -i_dynamic' ;; +- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 +- tmp_addflag=' -i_dynamic -nofor_main' ;; +- ifc* | ifort*) # Intel Fortran compiler +- tmp_addflag=' -nofor_main' ;; +- esac +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) # Sun C 5.9 +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- tmp_sharedflag='-G' ;; +- *Sun\ F*) # Sun Fortran 8.3 +- tmp_sharedflag='-G' ;; +- *) +- tmp_sharedflag='-shared' ;; +- esac +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- +- if test $supports_anon_versioning = yes; then +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ +- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ +- $echo "local: *; };" >> $output_objdir/$libname.ver~ +- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' +- fi +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' +- wlarc= +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- fi +- ;; +- +- solaris*) +- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- cat <&2 +- +-*** Warning: The releases 2.8.* of the GNU linker cannot reliably +-*** create shared libraries on Solaris systems. Therefore, libtool +-*** is disabling shared libraries support. We urge you to upgrade GNU +-*** binutils to release 2.9.1 or newer. Another option is to modify +-*** your PATH or compiler configuration so that the native linker is +-*** used, and then restart. +- +-EOF +- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- +- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) +- case `$LD -v 2>&1` in +- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- cat <<_LT_EOF 1>&2 +- +-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +-*** reliably create shared libraries on SCO systems. Therefore, libtool +-*** is disabling shared libraries support. We urge you to upgrade GNU +-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +-*** your PATH or compiler configuration so that the native linker is +-*** used, and then restart. +- +-_LT_EOF +- ;; +- *) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- esac +- ;; +- +- sunos4*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- wlarc= +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; +- +- *) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- esac +- +- if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then +- runpath_var= +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +- fi +- else +- # PORTME fill in a description of your system's linker (not GNU ld) +- case $host_os in +- aix3*) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported +- _LT_AC_TAGVAR(always_export_symbols, $1)=yes +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' +- # Note: this linker hardcodes the directories in LIBPATH if there +- # are no directories specified by -L. +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then +- # Neither direct hardcoding nor static linking is supported with a +- # broken collect2. +- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported +- fi +- ;; +- +- aix4* | aix5*) +- if test "$host_cpu" = ia64; then +- # On IA64, the linker does run time linking by default, so we don't +- # have to do anything special. +- aix_use_runtimelinking=no +- exp_sym_flag='-Bexport' +- no_entry_flag="" +- else +- # If we're using GNU nm, then we don't want the "-C" option. +- # -C means demangle to AIX nm, but means don't demangle with GNU nm +- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' +- else +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' +- fi +- aix_use_runtimelinking=no +- +- # Test if we are trying to use run time linking or normal +- # AIX style linking. If -brtl is somewhere in LDFLAGS, we +- # need to do runtime linking. +- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) +- for ld_flag in $LDFLAGS; do +- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then +- aix_use_runtimelinking=yes +- break +- fi +- done +- ;; +- esac +- +- exp_sym_flag='-bexport' +- no_entry_flag='-bnoentry' +- fi +- +- # When large executables or shared objects are built, AIX ld can +- # have problems creating the table of contents. If linking a library +- # or program results in "error TOC overflow" add -mminimal-toc to +- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not +- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. +- +- _LT_AC_TAGVAR(archive_cmds, $1)='' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes +- +- if test "$GCC" = yes; then +- case $host_os in aix4.[[012]]|aix4.[[012]].*) +- # We only want to do this on AIX 4.2 and lower, the check +- # below for broken collect2 doesn't work under 4.3+ +- collect2name=`${CC} -print-prog-name=collect2` +- if test -f "$collect2name" && \ +- strings "$collect2name" | grep resolve_lib_name >/dev/null +- then +- # We have reworked collect2 +- : +- else +- # We have old collect2 +- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported +- # It fails to find uninstalled libraries when the uninstalled +- # path is not listed in the libpath. Setting hardcode_minus_L +- # to unsupported forces relinking +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= +- fi +- ;; +- esac +- shared_flag='-shared' +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag="$shared_flag "'${wl}-G' +- fi +- else +- # not using gcc +- if test "$host_cpu" = ia64; then +- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release +- # chokes on -Wl,-G. The following line is correct: +- shared_flag='-G' +- else +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag='${wl}-G' +- else +- shared_flag='${wl}-bM:SRE' +- fi +- fi +- fi +- +- # It seems that -bexpall does not export symbols beginning with +- # underscore (_), so it is better to generate a list of symbols to export. +- _LT_AC_TAGVAR(always_export_symbols, $1)=yes +- if test "$aix_use_runtimelinking" = yes; then +- # Warning - without using the other runtime loading flags (-brtl), +- # -berok will link without error, but may produce a broken library. +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' +- # Determine the default libpath from the value encoded in an empty executable. +- _LT_AC_SYS_LIBPATH_AIX +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" +- else +- if test "$host_cpu" = ia64; then +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" +- else +- # Determine the default libpath from the value encoded in an empty executable. +- _LT_AC_SYS_LIBPATH_AIX +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" +- # Warning - without using the other run time loading flags, +- # -berok will link without error, but may produce a broken library. +- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' +- # Exported symbols can be pulled into shared objects from archives +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes +- # This is similar to how AIX traditionally builds its shared libraries. +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' +- fi +- fi +- ;; +- +- amigaos*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- # see comment about different semantics on the GNU ld section +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- +- bsdi[[45]]*) +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic +- ;; +- +- cygwin* | mingw* | pw32*) +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- # hardcode_libdir_flag_spec is actually meaningless, as there is +- # no search path for DLLs. +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported +- # Tell ltmain to make .lib files, not .a files. +- libext=lib +- # Tell ltmain to make .dll files, not .so files. +- shrext_cmds=".dll" +- # FIXME: Setting linknames here is a bad hack. +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' +- # The linker will automatically build a .lib file if we build a DLL. +- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' +- # FIXME: Should let the user specify the lib program. +- _LT_AC_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' +- _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' +- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes +- ;; +- +- darwin* | rhapsody*) +- case $host_os in +- rhapsody* | darwin1.[[012]]) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' +- ;; +- *) # Darwin 1.3 on +- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' +- else +- case ${MACOSX_DEPLOYMENT_TARGET} in +- 10.[[012]]) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' +- ;; +- 10.*) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' +- ;; +- esac +- fi +- ;; +- esac +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes +- if test "$GCC" = yes ; then +- output_verbose_link_cmd='echo' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- else +- case $cc_basename in +- xlc*) +- output_verbose_link_cmd='echo' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' +- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- ;; +- *) +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- esac +- fi +- ;; +- +- dgux*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; +- +- freebsd1*) +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- +- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor +- # support. Future versions do this automatically, but an explicit c++rt0.o +- # does not break anything, and helps significantly (at the cost of a little +- # extra space). +- freebsd2.2*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; +- +- # Unfortunately, older versions of FreeBSD 2 do not have this feature. +- freebsd2*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; +- +- # FreeBSD 3 and greater uses gcc -shared to do shared libraries. +- freebsd* | dragonfly*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; +- +- hpux9*) +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- fi +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' +- ;; +- +- hpux10*) +- if test "$GCC" = yes -a "$with_gnu_ld" = no; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' +- fi +- if test "$with_gnu_ld" = no; then +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' +- +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- fi +- ;; +- +- hpux11*) +- if test "$GCC" = yes -a "$with_gnu_ld" = no; then +- case $host_cpu in +- hppa*64*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- ia64*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- esac +- else +- case $host_cpu in +- hppa*64*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- ia64*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- esac +- fi +- if test "$with_gnu_ld" = no; then +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- +- case $host_cpu in +- hppa*64*|ia64*) +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; +- *) +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' +- +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- ;; +- esac +- fi +- ;; +- +- irix5* | irix6* | nonstopux*) +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' +- fi +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes +- ;; ++glib_save_datarootdir="$datarootdir" ++test "x$prefix" = xNONE && prefix=$ac_default_prefix ++test "x$exec_prefix" = xNONE && exec_prefix=$prefix ++datarootdir=`eval echo "${datarootdir}"` ++if test "x$CATOBJEXT" = "x.mo" ; then ++ localedir=`eval echo "${libdir}/locale"` ++else ++ localedir=`eval echo "${datadir}/locale"` ++fi ++prefix="$glib_save_prefix" ++exec_prefix="$glib_save_exec_prefix" ++datarootdir="$glib_save_datarootdir" ++AC_DEFINE_UNQUOTED($1, "$localedir", ++ [Define the location where the catalogs will be installed]) ++]) + +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF +- fi +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++dnl ++dnl Now the definitions that aclocal will find ++dnl ++ifdef(glib_configure_in,[],[ ++AC_DEFUN([AM_GLIB_GNU_GETTEXT],[GLIB_GNU_GETTEXT($@)]) ++AC_DEFUN([AM_GLIB_DEFINE_LOCALEDIR],[GLIB_DEFINE_LOCALEDIR($@)]) ++])dnl + +- newsos6) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++# GLIB_RUN_PROG(PROGRAM, TEST-FILE, [ACTION-IF-PASS], [ACTION-IF-FAIL]) ++# ++# Create a temporary file with TEST-FILE as its contents and pass the ++# file name to PROGRAM. Perform ACTION-IF-PASS if PROGRAM exits with ++# 0 and perform ACTION-IF-FAIL for any other exit status. ++AC_DEFUN([GLIB_RUN_PROG], ++[cat >conftest.foo <<_ACEOF ++$2 ++_ACEOF ++if AC_RUN_LOG([$1 conftest.foo]); then ++ m4_ifval([$3], [$3], [:]) ++m4_ifvaln([$4], [else $4])dnl ++echo "$as_me: failed input was:" >&AS_MESSAGE_LOG_FD ++sed 's/^/| /' conftest.foo >&AS_MESSAGE_LOG_FD ++fi]) + +- openbsd*) +- if test -f /usr/libexec/ld.so; then +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' +- else +- case $host_os in +- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- ;; +- *) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- ;; +- esac +- fi +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; + +- os2*) +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported +- _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' +- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' +- ;; ++dnl GNOME_COMPILE_WARNINGS ++dnl Turn on many useful compiler warnings ++dnl For now, only works on GCC ++AC_DEFUN([GNOME_COMPILE_WARNINGS],[ ++ dnl ****************************** ++ dnl More compiler warnings ++ dnl ****************************** + +- osf3*) +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- fi +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- ;; ++ AC_ARG_ENABLE(compile-warnings, ++ AC_HELP_STRING([--enable-compile-warnings=@<:@no/minimum/yes/maximum/error@:>@], ++ [Turn on compiler warnings]),, ++ [enable_compile_warnings="m4_default([$1],[yes])"]) + +- osf4* | osf5*) # as osf3* with the addition of -msym flag +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- else +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ +- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' ++ warnCFLAGS= ++ if test "x$GCC" != xyes; then ++ enable_compile_warnings=no ++ fi + +- # Both c and cxx compiler support -rpath directly +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' +- fi +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- ;; ++ warning_flags= ++ realsave_CFLAGS="$CFLAGS" + +- solaris*) +- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' +- if test "$GCC" = yes; then +- wlarc='${wl}' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' +- else +- wlarc='' +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +- fi +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- case $host_os in +- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; +- *) +- # The compiler driver will combine and reorder linker options, +- # but understands `-z linker_flag'. GCC discards it without `$wl', +- # but is careful enough not to reorder. +- # Supported since Solaris 2.6 (maybe 2.5.1?) +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' +- else +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' +- fi ++ case "$enable_compile_warnings" in ++ no) ++ warning_flags= + ;; +- esac +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes +- ;; +- +- sunos4*) +- if test "x$host_vendor" = xsequent; then +- # Use $CC to link under sequent, because it throws in some extra .o +- # files that make .init and .fini sections work. +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' +- fi +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; +- +- sysv4) +- case $host_vendor in +- sni) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? ++ minimum) ++ warning_flags="-Wall" + ;; +- siemens) +- ## LD is ld it makes a PLAMLIB +- ## CC just makes a GrossModule. +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- ;; +- motorola) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie ++ yes) ++ warning_flags="-Wall -Wmissing-prototypes" + ;; +- esac +- runpath_var='LD_RUN_PATH' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++ maximum|error) ++ warning_flags="-Wall -Wmissing-prototypes -Wnested-externs -Wpointer-arith" ++ CFLAGS="$warning_flags $CFLAGS" ++ for option in -Wno-sign-compare; do ++ SAVE_CFLAGS="$CFLAGS" ++ CFLAGS="$CFLAGS $option" ++ AC_MSG_CHECKING([whether gcc understands $option]) ++ AC_TRY_COMPILE([], [], ++ has_option=yes, ++ has_option=no,) ++ CFLAGS="$SAVE_CFLAGS" ++ AC_MSG_RESULT($has_option) ++ if test $has_option = yes; then ++ warning_flags="$warning_flags $option" ++ fi ++ unset has_option ++ unset SAVE_CFLAGS ++ done ++ unset option ++ if test "$enable_compile_warnings" = "error" ; then ++ warning_flags="$warning_flags -Werror" ++ fi ++ ;; ++ *) ++ AC_MSG_ERROR(Unknown argument '$enable_compile_warnings' to --enable-compile-warnings) ++ ;; ++ esac ++ CFLAGS="$realsave_CFLAGS" ++ AC_MSG_CHECKING(what warning flags to pass to the C compiler) ++ AC_MSG_RESULT($warning_flags) + +- sysv4.3*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' +- ;; ++ AC_ARG_ENABLE(iso-c, ++ AC_HELP_STRING([--enable-iso-c], ++ [Try to warn if code is not ISO C ]),, ++ [enable_iso_c=no]) + +- sysv4*MP*) +- if test -d /usr/nec; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- runpath_var=LD_RUN_PATH +- hardcode_runpath_var=yes +- _LT_AC_TAGVAR(ld_shlibs, $1)=yes +- fi +- ;; ++ AC_MSG_CHECKING(what language compliance flags to pass to the C compiler) ++ complCFLAGS= ++ if test "x$enable_iso_c" != "xno"; then ++ if test "x$GCC" = "xyes"; then ++ case " $CFLAGS " in ++ *[\ \ ]-ansi[\ \ ]*) ;; ++ *) complCFLAGS="$complCFLAGS -ansi" ;; ++ esac ++ case " $CFLAGS " in ++ *[\ \ ]-pedantic[\ \ ]*) ;; ++ *) complCFLAGS="$complCFLAGS -pedantic" ;; ++ esac ++ fi ++ fi ++ AC_MSG_RESULT($complCFLAGS) + +- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) +- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- runpath_var='LD_RUN_PATH' +- +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- fi +- ;; ++ WARN_CFLAGS="$warning_flags $complCFLAGS" ++ AC_SUBST(WARN_CFLAGS) ++]) + +- sysv5* | sco3.2v5* | sco5v6*) +- # Note: We can NOT use -z defs as we might desire, because we do not +- # link with -lc, and that would cause any symbols used from libc to +- # always be unresolved, which means just about no library would +- # ever link correctly. If we're not using GNU ld we use -z text +- # though, which does catch some bad symbols but isn't as heavy-handed +- # as -z defs. +- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' +- runpath_var='LD_RUN_PATH' +- +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- fi +- ;; ++dnl For C++, do basically the same thing. + +- uts4*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++AC_DEFUN([GNOME_CXX_WARNINGS],[ ++ AC_ARG_ENABLE(cxx-warnings, ++ AC_HELP_STRING([--enable-cxx-warnings=@<:@no/minimum/yes@:>@] ++ [Turn on compiler warnings.]),, ++ [enable_cxx_warnings="m4_default([$1],[minimum])"]) + +- *) +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- esac ++ AC_MSG_CHECKING(what warning flags to pass to the C++ compiler) ++ warnCXXFLAGS= ++ if test "x$GXX" != xyes; then ++ enable_cxx_warnings=no + fi +-]) +-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) +-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no +- +-# +-# Do we need to explicitly link libc? +-# +-case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in +-x|xyes) +- # Assume -lc should be added +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes ++ if test "x$enable_cxx_warnings" != "xno"; then ++ if test "x$GXX" = "xyes"; then ++ case " $CXXFLAGS " in ++ *[\ \ ]-Wall[\ \ ]*) ;; ++ *) warnCXXFLAGS="-Wall -Wno-unused" ;; ++ esac + +- if test "$enable_shared" = yes && test "$GCC" = yes; then +- case $_LT_AC_TAGVAR(archive_cmds, $1) in +- *'~'*) +- # FIXME: we may have to deal with multi-command sequences. +- ;; +- '$CC '*) +- # Test whether the compiler implicitly links with -lc since on some +- # systems, -lgcc has to come before -lc. If gcc already passes -lc +- # to ld, don't add -lc before -lgcc. +- AC_MSG_CHECKING([whether -lc should be explicitly linked in]) +- $rm conftest* +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext +- +- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then +- soname=conftest +- lib=conftest +- libobjs=conftest.$ac_objext +- deplibs= +- wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) +- pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) +- compiler_flags=-v +- linker_flags=-v +- verstring= +- output_objdir=. +- libname=conftest +- lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)= +- if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) +- then +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- else +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes +- fi +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag +- else +- cat conftest.err 1>&5 ++ ## -W is not all that useful. And it cannot be controlled ++ ## with individual -Wno-xxx flags, unlike -Wall ++ if test "x$enable_cxx_warnings" = "xyes"; then ++ warnCXXFLAGS="$warnCXXFLAGS -Wshadow -Woverloaded-virtual" + fi +- $rm conftest* +- AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) +- ;; +- esac ++ fi + fi +- ;; +-esac +-])# AC_LIBTOOL_PROG_LD_SHLIBS +- +- +-# _LT_AC_FILE_LTDLL_C +-# ------------------- +-# Be careful that the start marker always follows a newline. +-AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ +-# /* ltdll.c starts here */ +-# #define WIN32_LEAN_AND_MEAN +-# #include +-# #undef WIN32_LEAN_AND_MEAN +-# #include +-# +-# #ifndef __CYGWIN__ +-# # ifdef __CYGWIN32__ +-# # define __CYGWIN__ __CYGWIN32__ +-# # endif +-# #endif +-# +-# #ifdef __cplusplus +-# extern "C" { +-# #endif +-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); +-# #ifdef __cplusplus +-# } +-# #endif +-# +-# #ifdef __CYGWIN__ +-# #include +-# DECLARE_CYGWIN_DLL( DllMain ); +-# #endif +-# HINSTANCE __hDllInstance_base; +-# +-# BOOL APIENTRY +-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) +-# { +-# __hDllInstance_base = hInst; +-# return TRUE; +-# } +-# /* ltdll.c ends here */ +-])# _LT_AC_FILE_LTDLL_C +- +- +-# _LT_AC_TAGVAR(VARNAME, [TAGNAME]) +-# --------------------------------- +-AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])]) +- +- +-# old names +-AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) +-AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +-AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) +-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) +-AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) +-AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) +- +-# This is just to silence aclocal about the macro not being used +-ifelse([AC_DISABLE_FAST_INSTALL]) +- +-AC_DEFUN([LT_AC_PROG_GCJ], +-[AC_CHECK_TOOL(GCJ, gcj, no) +- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" +- AC_SUBST(GCJFLAGS) +-]) +- +-AC_DEFUN([LT_AC_PROG_RC], +-[AC_CHECK_TOOL(RC, windres, no) +-]) ++ AC_MSG_RESULT($warnCXXFLAGS) + ++ AC_ARG_ENABLE(iso-cxx, ++ AC_HELP_STRING([--enable-iso-cxx], ++ [Try to warn if code is not ISO C++ ]),, ++ [enable_iso_cxx=no]) + +-# Cheap backport of AS_EXECUTABLE_P and required macros +-# from Autoconf 2.59; we should not use $as_executable_p directly. ++ AC_MSG_CHECKING(what language compliance flags to pass to the C++ compiler) ++ complCXXFLAGS= ++ if test "x$enable_iso_cxx" != "xno"; then ++ if test "x$GXX" = "xyes"; then ++ case " $CXXFLAGS " in ++ *[\ \ ]-ansi[\ \ ]*) ;; ++ *) complCXXFLAGS="$complCXXFLAGS -ansi" ;; ++ esac + +-# _AS_TEST_PREPARE +-# ---------------- +-m4_ifndef([_AS_TEST_PREPARE], +-[m4_defun([_AS_TEST_PREPARE], +-[if test -x / >/dev/null 2>&1; then +- as_executable_p='test -x' +-else +- as_executable_p='test -f' +-fi +-])])# _AS_TEST_PREPARE ++ case " $CXXFLAGS " in ++ *[\ \ ]-pedantic[\ \ ]*) ;; ++ *) complCXXFLAGS="$complCXXFLAGS -pedantic" ;; ++ esac ++ fi ++ fi ++ AC_MSG_RESULT($complCXXFLAGS) + +-# AS_EXECUTABLE_P +-# --------------- +-# Check whether a file is executable. +-m4_ifndef([AS_EXECUTABLE_P], +-[m4_defun([AS_EXECUTABLE_P], +-[AS_REQUIRE([_AS_TEST_PREPARE])dnl +-$as_executable_p $1[]dnl +-])])# AS_EXECUTABLE_P +- +-# NOTE: This macro has been submitted for inclusion into # +-# GNU Autoconf as AC_PROG_SED. When it is available in # +-# a released version of Autoconf we should remove this # +-# macro and use it instead. # +-# LT_AC_PROG_SED +-# -------------- +-# Check for a fully-functional sed program, that truncates +-# as few characters as possible. Prefer GNU sed if found. +-AC_DEFUN([LT_AC_PROG_SED], +-[AC_MSG_CHECKING([for a sed that does not truncate output]) +-AC_CACHE_VAL(lt_cv_path_SED, +-[# Loop through the user's path and test for sed and gsed. +-# Then use that list of sed's as ones to test for truncation. +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for lt_ac_prog in sed gsed; do +- for ac_exec_ext in '' $ac_executable_extensions; do +- if AS_EXECUTABLE_P(["$as_dir/$lt_ac_prog$ac_exec_ext"]); then +- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" +- fi +- done +- done +-done +-IFS=$as_save_IFS +-lt_ac_max=0 +-lt_ac_count=0 +-# Add /usr/xpg4/bin/sed as it is typically found on Solaris +-# along with /bin/sed that truncates output. +-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do +- test ! -f $lt_ac_sed && continue +- cat /dev/null > conftest.in +- lt_ac_count=0 +- echo $ECHO_N "0123456789$ECHO_C" >conftest.in +- # Check for GNU sed and select it if it is found. +- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then +- lt_cv_path_SED=$lt_ac_sed +- break +- fi +- while true; do +- cat conftest.in conftest.in >conftest.tmp +- mv conftest.tmp conftest.in +- cp conftest.in conftest.nl +- echo >>conftest.nl +- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break +- cmp -s conftest.out conftest.nl || break +- # 10000 chars as input seems more than enough +- test $lt_ac_count -gt 10 && break +- lt_ac_count=`expr $lt_ac_count + 1` +- if test $lt_ac_count -gt $lt_ac_max; then +- lt_ac_max=$lt_ac_count +- lt_cv_path_SED=$lt_ac_sed +- fi +- done +-done +-]) +-SED=$lt_cv_path_SED +-AC_SUBST([SED]) +-AC_MSG_RESULT([$SED]) ++ WARN_CXXFLAGS="$CXXFLAGS $warnCXXFLAGS $complCXXFLAGS" ++ AC_SUBST(WARN_CXXFLAGS) + ]) + + # pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- +@@ -7270,14 +698,16 @@ + # _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) + # --------------------------------------------- + m4_define([_PKG_CONFIG], +-[if test -n "$$1"; then +- pkg_cv_[]$1="$$1" +- elif test -n "$PKG_CONFIG"; then +- PKG_CHECK_EXISTS([$3], +- [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], +- [pkg_failed=yes]) +- else +- pkg_failed=untried ++[if test -n "$PKG_CONFIG"; then ++ if test -n "$$1"; then ++ pkg_cv_[]$1="$$1" ++ else ++ PKG_CHECK_EXISTS([$3], ++ [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], ++ [pkg_failed=yes]) ++ fi ++else ++ pkg_failed=untried + fi[]dnl + ])# _PKG_CONFIG + +@@ -7321,9 +751,9 @@ + if test $pkg_failed = yes; then + _PKG_SHORT_ERRORS_SUPPORTED + if test $_pkg_short_errors_supported = yes; then +- $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1` ++ $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$2"` + else +- $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1` ++ $1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"` + fi + # Put the nasty error message in config.log where it belongs + echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD +@@ -7358,7 +788,7 @@ + fi[]dnl + ])# PKG_CHECK_MODULES + +-# Copyright (C) 2002, 2003, 2005, 2006, 2007 Free Software Foundation, Inc. ++# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, +@@ -7368,31 +798,14 @@ + # ---------------------------- + # Automake X.Y traces this macro to ensure aclocal.m4 has been + # generated from the m4 files accompanying Automake X.Y. +-# (This private macro should not be called outside this file.) +-AC_DEFUN([AM_AUTOMAKE_VERSION], +-[am__api_version='1.10' +-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +-dnl require some minimum version. Point them to the right macro. +-m4_if([$1], [1.10.1], [], +- [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +-]) +- +-# _AM_AUTOCONF_VERSION(VERSION) +-# ----------------------------- +-# aclocal traces this macro to find the Autoconf version. +-# This is a private macro too. Using m4_define simplifies +-# the logic in aclocal, which can simply ignore this definition. +-m4_define([_AM_AUTOCONF_VERSION], []) ++AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) + + # AM_SET_CURRENT_AUTOMAKE_VERSION + # ------------------------------- +-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. ++# Call AM_AUTOMAKE_VERSION so it can be traced. + # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. + AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +-[AM_AUTOMAKE_VERSION([1.10.1])dnl +-m4_ifndef([AC_AUTOCONF_VERSION], +- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +-_AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)]) ++ [AM_AUTOMAKE_VERSION([1.9.6])]) + + # AM_AUX_DIR_EXPAND -*- Autoconf -*- + +@@ -7449,14 +862,14 @@ + + # AM_CONDITIONAL -*- Autoconf -*- + +-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006 ++# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005 + # Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + +-# serial 8 ++# serial 7 + + # AM_CONDITIONAL(NAME, SHELL-CONDITION) + # ------------------------------------- +@@ -7465,10 +878,8 @@ + [AC_PREREQ(2.52)dnl + ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +-AC_SUBST([$1_TRUE])dnl +-AC_SUBST([$1_FALSE])dnl +-_AM_SUBST_NOTMAKE([$1_TRUE])dnl +-_AM_SUBST_NOTMAKE([$1_FALSE])dnl ++AC_SUBST([$1_TRUE]) ++AC_SUBST([$1_FALSE]) + if $2; then + $1_TRUE= + $1_FALSE='#' +@@ -7482,14 +893,15 @@ + Usually this means the macro was only invoked conditionally.]]) + fi])]) + +-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 ++ ++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 + # Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + +-# serial 9 ++# serial 8 + + # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be + # written in clear, in which case automake, when reading aclocal.m4, +@@ -7517,7 +929,6 @@ + ifelse([$1], CC, [depcc="$CC" am_compiler_list=], + [$1], CXX, [depcc="$CXX" am_compiler_list=], + [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], +- [$1], UPC, [depcc="$UPC" am_compiler_list=], + [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +@@ -7583,7 +994,6 @@ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && +- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then +@@ -7636,8 +1046,7 @@ + AMDEPBACKSLASH='\' + fi + AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +-AC_SUBST([AMDEPBACKSLASH])dnl +-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl ++AC_SUBST([AMDEPBACKSLASH]) + ]) + + # Generate code to set up dependency tracking. -*- Autoconf -*- +@@ -7662,9 +1071,8 @@ + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. +- # Grep'ing the whole file is not good either: AIX grep has a line +- # limit of 2048, but all sed's we know have understand at least 4000. +- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then ++ # So let's grep whole file. ++ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue +@@ -7723,14 +1131,14 @@ + + # Do all the work for Automake. -*- Autoconf -*- + +-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +-# 2005, 2006, 2008 Free Software Foundation, Inc. ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 ++# Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + +-# serial 13 ++# serial 12 + + # This macro actually does too much. Some checks are only needed if + # your package does certain things. But this isn't really a big deal. +@@ -7747,20 +1155,16 @@ + # arguments mandatory, and then we can depend on a new Autoconf + # release and drop the old call support. + AC_DEFUN([AM_INIT_AUTOMAKE], +-[AC_PREREQ([2.60])dnl ++[AC_PREREQ([2.58])dnl + dnl Autoconf wants to disallow AM_ names. We explicitly allow + dnl the ones we care about. + m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl + AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl + AC_REQUIRE([AC_PROG_INSTALL])dnl +-if test "`cd $srcdir && pwd`" != "`pwd`"; then +- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output +- # is not polluted with repeated "-I." +- AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl +- # test to see if srcdir already configured +- if test -f $srcdir/config.status; then +- AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) +- fi ++# test to see if srcdir already configured ++if test "`cd $srcdir && pwd`" != "`pwd`" && ++ test -f $srcdir/config.status; then ++ AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi + + # test whether we have cygpath +@@ -7780,9 +1184,6 @@ + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], + [_AM_SET_OPTIONS([$1])dnl +-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, +- [m4_fatal([AC_INIT should be called with package and version arguments])])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +@@ -7818,10 +1219,6 @@ + [_AM_DEPENDENCIES(CXX)], + [define([AC_PROG_CXX], + defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl +-AC_PROVIDE_IFELSE([AC_PROG_OBJC], +- [_AM_DEPENDENCIES(OBJC)], +- [define([AC_PROG_OBJC], +- defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl + ]) + ]) + +@@ -7835,17 +1232,16 @@ + # our stamp files there. + AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], + [# Compute $1's index in $config_headers. +-_am_arg=$1 + _am_stamp_count=1 + for _am_header in $config_headers :; do + case $_am_header in +- $_am_arg | $_am_arg:* ) ++ $1 | $1:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac + done +-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) ++echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) + + # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. + # +@@ -7858,7 +1254,7 @@ + # Define $install_sh. + AC_DEFUN([AM_PROG_INSTALL_SH], + [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +-install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} ++install_sh=${install_sh-"$am_aux_dir/install-sh"} + AC_SUBST(install_sh)]) + + # Copyright (C) 2003, 2005 Free Software Foundation, Inc. +@@ -7934,14 +1330,13 @@ + rm -f confinc confmf + ]) + +-# Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005 +-# Free Software Foundation, Inc. ++# Copyright (C) 1999, 2000, 2001, 2003, 2005 Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + +-# serial 5 ++# serial 3 + + # AM_PROG_CC_C_O + # -------------- +@@ -7949,7 +1344,6 @@ + AC_DEFUN([AM_PROG_CC_C_O], + [AC_REQUIRE([AC_PROG_CC_C_O])dnl + AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +-AC_REQUIRE_AUX_FILE([compile])dnl + # FIXME: we rely on the cache variable name because + # there is no other way. + set dummy $CC +@@ -7962,22 +1356,18 @@ + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" + fi +-dnl Make sure AC_PROG_CC is never called again, or it will override our +-dnl setting of CC. +-m4_define([AC_PROG_CC], +- [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])]) + ]) + + # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005 ++# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005 + # Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + +-# serial 5 ++# serial 4 + + # AM_MISSING_PROG(NAME, PROGRAM) + # ------------------------------ +@@ -7993,7 +1383,6 @@ + # If it does, set am_missing_run to use it, otherwise, to nothing. + AC_DEFUN([AM_MISSING_HAS_RUN], + [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +-AC_REQUIRE_AUX_FILE([missing])dnl + test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" + # Use eval to expand $SHELL + if eval "$MISSING --run true"; then +@@ -8004,7 +1393,7 @@ + fi + ]) + +-# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. ++# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, +@@ -8012,23 +1401,60 @@ + + # AM_PROG_MKDIR_P + # --------------- +-# Check for `mkdir -p'. ++# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. ++# ++# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories ++# created by `make install' are always world readable, even if the ++# installer happens to have an overly restrictive umask (e.g. 077). ++# This was a mistake. There are at least two reasons why we must not ++# use `-m 0755': ++# - it causes special bits like SGID to be ignored, ++# - it may be too restrictive (some setups expect 775 directories). ++# ++# Do not use -m 0755 and let people choose whatever they expect by ++# setting umask. ++# ++# We cannot accept any implementation of `mkdir' that recognizes `-p'. ++# Some implementations (such as Solaris 8's) are not thread-safe: if a ++# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' ++# concurrently, both version can detect that a/ is missing, but only ++# one can create it and the other will error out. Consequently we ++# restrict ourselves to GNU make (using the --version option ensures ++# this.) + AC_DEFUN([AM_PROG_MKDIR_P], +-[AC_PREREQ([2.60])dnl +-AC_REQUIRE([AC_PROG_MKDIR_P])dnl +-dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, +-dnl while keeping a definition of mkdir_p for backward compatibility. +-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. +-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of +-dnl Makefile.ins that do not define MKDIR_P, so we do our own +-dnl adjustment using top_builddir (which is defined more often than +-dnl MKDIR_P). +-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl +-case $mkdir_p in +- [[\\/$]]* | ?:[[\\/]]*) ;; +- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +-esac +-]) ++[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then ++ # We used to keeping the `.' as first argument, in order to ++ # allow $(mkdir_p) to be used without argument. As in ++ # $(mkdir_p) $(somedir) ++ # where $(somedir) is conditionally defined. However this is wrong ++ # for two reasons: ++ # 1. if the package is installed by a user who cannot write `.' ++ # make install will fail, ++ # 2. the above comment should most certainly read ++ # $(mkdir_p) $(DESTDIR)$(somedir) ++ # so it does not work when $(somedir) is undefined and ++ # $(DESTDIR) is not. ++ # To support the latter case, we have to write ++ # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), ++ # so the `.' trick is pointless. ++ mkdir_p='mkdir -p --' ++else ++ # On NextStep and OpenStep, the `mkdir' command does not ++ # recognize any option. It will interpret all options as ++ # directories to create, and then abort because `.' already ++ # exists. ++ for d in ./-p ./--version; ++ do ++ test -d $d && rmdir $d ++ done ++ # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. ++ if test -f "$ac_aux_dir/mkinstalldirs"; then ++ mkdir_p='$(mkinstalldirs)' ++ else ++ mkdir_p='$(install_sh) -d' ++ fi ++fi ++AC_SUBST([mkdir_p])]) + + # Helper functions for option handling. -*- Autoconf -*- + +@@ -8140,21 +1566,9 @@ + if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) + fi +-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" ++INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" + AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +-# Copyright (C) 2006 Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. +- +-# _AM_SUBST_NOTMAKE(VARIABLE) +-# --------------------------- +-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. +-# This macro is traced by Automake. +-AC_DEFUN([_AM_SUBST_NOTMAKE]) +- + # Check how to create a tarball. -*- Autoconf -*- + + # Copyright (C) 2004, 2005 Free Software Foundation, Inc. +@@ -8253,3 +1667,8 @@ + + m4_include([m4/gnome-doc-utils.m4]) + m4_include([m4/intltool.m4]) ++m4_include([m4/libtool.m4]) ++m4_include([m4/ltoptions.m4]) ++m4_include([m4/ltsugar.m4]) ++m4_include([m4/ltversion.m4]) ++m4_include([m4/lt~obsolete.m4]) +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/applets/brightness/Makefile.in gnome-power-manager-2.24.0.new/applets/brightness/Makefile.in +--- gnome-power-manager-2.24.0/applets/brightness/Makefile.in 2008-09-22 22:46:11.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/applets/brightness/Makefile.in 2008-11-20 18:37:25.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -15,11 +15,15 @@ + @SET_MAKE@ + + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = ../.. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -38,7 +42,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -51,21 +58,24 @@ + am_gnome_brightness_applet_OBJECTS = brightness-applet.$(OBJEXT) + gnome_brightness_applet_OBJECTS = \ + $(am_gnome_brightness_applet_OBJECTS) +-am__DEPENDENCIES_1 = +-gnome_brightness_applet_DEPENDENCIES = $(LOCAL_LIBDBUS_LIBS) \ +- $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) +-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) ++am__DEPENDENCIES_1 = \ ++ $(top_builddir)/libdbus-glib/libdbus-monitor-session.la \ ++ $(top_builddir)/libdbus-glib/libdbus-monitor-system.la \ ++ $(top_builddir)/libdbus-glib/libdbus-watch.la ++am__DEPENDENCIES_2 = ++gnome_brightness_applet_DEPENDENCIES = $(am__DEPENDENCIES_1) \ ++ $(am__DEPENDENCIES_2) $(am__DEPENDENCIES_2) ++DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +- --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ +- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) ++LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \ ++ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ ++ $(AM_CFLAGS) $(CFLAGS) + CCLD = $(CC) +-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +- --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ +- $(LDFLAGS) -o $@ ++LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ ++ $(AM_LDFLAGS) $(LDFLAGS) -o $@ + SOURCES = $(gnome_brightness_applet_SOURCES) + DIST_SOURCES = $(gnome_brightness_applet_SOURCES) + am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +@@ -82,6 +92,8 @@ + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -97,10 +109,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -112,17 +120,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -146,8 +160,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -177,6 +204,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -189,16 +217,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -239,13 +271,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -257,7 +286,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -276,6 +304,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -285,11 +314,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + INCLUDES = \ + -I. -I$(srcdir) \ + $(GLIB_CFLAGS) \ +@@ -364,15 +390,15 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + install-libexecPROGRAMS: $(libexec_PROGRAMS) + @$(NORMAL_INSTALL) +- test -z "$(libexecdir)" || $(MKDIR_P) "$(DESTDIR)$(libexecdir)" ++ test -z "$(libexecdir)" || $(mkdir_p) "$(DESTDIR)$(libexecdir)" + @list='$(libexec_PROGRAMS)'; for p in $$list; do \ + p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ + if test -f $$p \ + || test -f $$p1 \ + ; then \ + f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(libexecdir)/$$f'"; \ +- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(libexecdir)/$$f" || exit 1; \ ++ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(libexecPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(libexecdir)/$$f'"; \ ++ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(libexecPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(libexecdir)/$$f" || exit 1; \ + else :; fi; \ + done + +@@ -392,7 +418,7 @@ + done + gnome-brightness-applet$(EXEEXT): $(gnome_brightness_applet_OBJECTS) $(gnome_brightness_applet_DEPENDENCIES) + @rm -f gnome-brightness-applet$(EXEEXT) +- $(LINK) $(gnome_brightness_applet_OBJECTS) $(gnome_brightness_applet_LDADD) $(LIBS) ++ $(LINK) $(gnome_brightness_applet_LDFLAGS) $(gnome_brightness_applet_OBJECTS) $(gnome_brightness_applet_LDADD) $(LIBS) + + mostlyclean-compile: + -rm -f *.$(OBJEXT) +@@ -403,22 +429,22 @@ + @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/brightness-applet.Po@am__quote@ + + .c.o: +-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c $< + + .c.obj: +-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: +-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo ++@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< +@@ -428,9 +454,13 @@ + + clean-libtool: + -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + install-serverDATA: $(server_DATA) + @$(NORMAL_INSTALL) +- test -z "$(serverdir)" || $(MKDIR_P) "$(DESTDIR)$(serverdir)" ++ test -z "$(serverdir)" || $(mkdir_p) "$(DESTDIR)$(serverdir)" + @list='$(server_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ +@@ -447,7 +477,7 @@ + done + install-uiDATA: $(ui_DATA) + @$(NORMAL_INSTALL) +- test -z "$(uidir)" || $(MKDIR_P) "$(DESTDIR)$(uidir)" ++ test -z "$(uidir)" || $(mkdir_p) "$(DESTDIR)$(uidir)" + @list='$(ui_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ +@@ -468,8 +498,8 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + mkid -fID $$unique + tags: TAGS + +@@ -481,8 +511,8 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +@@ -492,12 +522,13 @@ + CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ ++ here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique +@@ -511,21 +542,22 @@ + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -541,7 +573,7 @@ + all-am: Makefile $(PROGRAMS) $(DATA) + installdirs: + for dir in "$(DESTDIR)$(libexecdir)" "$(DESTDIR)$(serverdir)" "$(DESTDIR)$(uidir)"; do \ +- test -z "$$dir" || $(MKDIR_P) "$$dir"; \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: install-am + install-exec: install-exec-am +@@ -577,7 +609,7 @@ + -rm -rf ./$(DEPDIR) + -rm -f Makefile + distclean-am: clean-am distclean-compile distclean-generic \ +- distclean-tags ++ distclean-libtool distclean-tags + + dvi: dvi-am + +@@ -591,20 +623,12 @@ + + install-data-am: install-serverDATA install-uiDATA + +-install-dvi: install-dvi-am +- + install-exec-am: install-libexecPROGRAMS + +-install-html: install-html-am +- + install-info: install-info-am + + install-man: + +-install-pdf: install-pdf-am +- +-install-ps: install-ps-am +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -625,26 +649,22 @@ + + ps-am: + +-uninstall-am: uninstall-libexecPROGRAMS uninstall-serverDATA \ +- uninstall-uiDATA +- +-.MAKE: install-am install-strip ++uninstall-am: uninstall-info-am uninstall-libexecPROGRAMS \ ++ uninstall-serverDATA uninstall-uiDATA + + .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ + clean-libexecPROGRAMS clean-libtool ctags distclean \ + distclean-compile distclean-generic distclean-libtool \ + distclean-tags distdir dvi dvi-am html html-am info info-am \ +- install install-am install-data install-data-am install-dvi \ +- install-dvi-am install-exec install-exec-am install-html \ +- install-html-am install-info install-info-am \ +- install-libexecPROGRAMS install-man install-pdf install-pdf-am \ +- install-ps install-ps-am install-serverDATA install-strip \ +- install-uiDATA installcheck installcheck-am installdirs \ +- maintainer-clean maintainer-clean-generic mostlyclean \ +- mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ +- pdf pdf-am ps ps-am tags uninstall uninstall-am \ +- uninstall-libexecPROGRAMS uninstall-serverDATA \ +- uninstall-uiDATA ++ install install-am install-data install-data-am install-exec \ ++ install-exec-am install-info install-info-am \ ++ install-libexecPROGRAMS install-man install-serverDATA \ ++ install-strip install-uiDATA installcheck installcheck-am \ ++ installdirs maintainer-clean maintainer-clean-generic \ ++ mostlyclean mostlyclean-compile mostlyclean-generic \ ++ mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \ ++ uninstall-am uninstall-info-am uninstall-libexecPROGRAMS \ ++ uninstall-serverDATA uninstall-uiDATA + + + $(server_in_files): $(server_in_files:.server.in=.server.in.in) +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/applets/inhibit/Makefile.in gnome-power-manager-2.24.0.new/applets/inhibit/Makefile.in +--- gnome-power-manager-2.24.0/applets/inhibit/Makefile.in 2008-09-22 22:46:11.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/applets/inhibit/Makefile.in 2008-11-20 18:37:25.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -15,11 +15,15 @@ + @SET_MAKE@ + + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = ../.. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -38,7 +42,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -50,21 +57,24 @@ + PROGRAMS = $(libexec_PROGRAMS) + am_gnome_inhibit_applet_OBJECTS = inhibit-applet.$(OBJEXT) + gnome_inhibit_applet_OBJECTS = $(am_gnome_inhibit_applet_OBJECTS) +-am__DEPENDENCIES_1 = +-gnome_inhibit_applet_DEPENDENCIES = $(LOCAL_LIBDBUS_LIBS) \ +- $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) +-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) ++am__DEPENDENCIES_1 = \ ++ $(top_builddir)/libdbus-glib/libdbus-monitor-session.la \ ++ $(top_builddir)/libdbus-glib/libdbus-monitor-system.la \ ++ $(top_builddir)/libdbus-glib/libdbus-watch.la ++am__DEPENDENCIES_2 = ++gnome_inhibit_applet_DEPENDENCIES = $(am__DEPENDENCIES_1) \ ++ $(am__DEPENDENCIES_2) $(am__DEPENDENCIES_2) ++DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +- --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ +- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) ++LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \ ++ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ ++ $(AM_CFLAGS) $(CFLAGS) + CCLD = $(CC) +-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +- --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ +- $(LDFLAGS) -o $@ ++LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ ++ $(AM_LDFLAGS) $(LDFLAGS) -o $@ + SOURCES = $(gnome_inhibit_applet_SOURCES) + DIST_SOURCES = $(gnome_inhibit_applet_SOURCES) + am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +@@ -81,6 +91,8 @@ + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -96,10 +108,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -111,17 +119,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -145,8 +159,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -176,6 +203,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -188,16 +216,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -238,13 +270,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -256,7 +285,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -275,6 +303,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -284,11 +313,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + INCLUDES = \ + -I. -I$(srcdir) \ + $(GLIB_CFLAGS) \ +@@ -363,15 +389,15 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + install-libexecPROGRAMS: $(libexec_PROGRAMS) + @$(NORMAL_INSTALL) +- test -z "$(libexecdir)" || $(MKDIR_P) "$(DESTDIR)$(libexecdir)" ++ test -z "$(libexecdir)" || $(mkdir_p) "$(DESTDIR)$(libexecdir)" + @list='$(libexec_PROGRAMS)'; for p in $$list; do \ + p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ + if test -f $$p \ + || test -f $$p1 \ + ; then \ + f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(libexecdir)/$$f'"; \ +- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libexecPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(libexecdir)/$$f" || exit 1; \ ++ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(libexecPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(libexecdir)/$$f'"; \ ++ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(libexecPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(libexecdir)/$$f" || exit 1; \ + else :; fi; \ + done + +@@ -391,7 +417,7 @@ + done + gnome-inhibit-applet$(EXEEXT): $(gnome_inhibit_applet_OBJECTS) $(gnome_inhibit_applet_DEPENDENCIES) + @rm -f gnome-inhibit-applet$(EXEEXT) +- $(LINK) $(gnome_inhibit_applet_OBJECTS) $(gnome_inhibit_applet_LDADD) $(LIBS) ++ $(LINK) $(gnome_inhibit_applet_LDFLAGS) $(gnome_inhibit_applet_OBJECTS) $(gnome_inhibit_applet_LDADD) $(LIBS) + + mostlyclean-compile: + -rm -f *.$(OBJEXT) +@@ -402,22 +428,22 @@ + @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/inhibit-applet.Po@am__quote@ + + .c.o: +-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c $< + + .c.obj: +-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: +-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo ++@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< +@@ -427,9 +453,13 @@ + + clean-libtool: + -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + install-serverDATA: $(server_DATA) + @$(NORMAL_INSTALL) +- test -z "$(serverdir)" || $(MKDIR_P) "$(DESTDIR)$(serverdir)" ++ test -z "$(serverdir)" || $(mkdir_p) "$(DESTDIR)$(serverdir)" + @list='$(server_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ +@@ -446,7 +476,7 @@ + done + install-uiDATA: $(ui_DATA) + @$(NORMAL_INSTALL) +- test -z "$(uidir)" || $(MKDIR_P) "$(DESTDIR)$(uidir)" ++ test -z "$(uidir)" || $(mkdir_p) "$(DESTDIR)$(uidir)" + @list='$(ui_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ +@@ -467,8 +497,8 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + mkid -fID $$unique + tags: TAGS + +@@ -480,8 +510,8 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +@@ -491,12 +521,13 @@ + CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ ++ here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique +@@ -510,21 +541,22 @@ + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -540,7 +572,7 @@ + all-am: Makefile $(PROGRAMS) $(DATA) + installdirs: + for dir in "$(DESTDIR)$(libexecdir)" "$(DESTDIR)$(serverdir)" "$(DESTDIR)$(uidir)"; do \ +- test -z "$$dir" || $(MKDIR_P) "$$dir"; \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: install-am + install-exec: install-exec-am +@@ -576,7 +608,7 @@ + -rm -rf ./$(DEPDIR) + -rm -f Makefile + distclean-am: clean-am distclean-compile distclean-generic \ +- distclean-tags ++ distclean-libtool distclean-tags + + dvi: dvi-am + +@@ -590,20 +622,12 @@ + + install-data-am: install-serverDATA install-uiDATA + +-install-dvi: install-dvi-am +- + install-exec-am: install-libexecPROGRAMS + +-install-html: install-html-am +- + install-info: install-info-am + + install-man: + +-install-pdf: install-pdf-am +- +-install-ps: install-ps-am +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -624,26 +648,22 @@ + + ps-am: + +-uninstall-am: uninstall-libexecPROGRAMS uninstall-serverDATA \ +- uninstall-uiDATA +- +-.MAKE: install-am install-strip ++uninstall-am: uninstall-info-am uninstall-libexecPROGRAMS \ ++ uninstall-serverDATA uninstall-uiDATA + + .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ + clean-libexecPROGRAMS clean-libtool ctags distclean \ + distclean-compile distclean-generic distclean-libtool \ + distclean-tags distdir dvi dvi-am html html-am info info-am \ +- install install-am install-data install-data-am install-dvi \ +- install-dvi-am install-exec install-exec-am install-html \ +- install-html-am install-info install-info-am \ +- install-libexecPROGRAMS install-man install-pdf install-pdf-am \ +- install-ps install-ps-am install-serverDATA install-strip \ +- install-uiDATA installcheck installcheck-am installdirs \ +- maintainer-clean maintainer-clean-generic mostlyclean \ +- mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ +- pdf pdf-am ps ps-am tags uninstall uninstall-am \ +- uninstall-libexecPROGRAMS uninstall-serverDATA \ +- uninstall-uiDATA ++ install install-am install-data install-data-am install-exec \ ++ install-exec-am install-info install-info-am \ ++ install-libexecPROGRAMS install-man install-serverDATA \ ++ install-strip install-uiDATA installcheck installcheck-am \ ++ installdirs maintainer-clean maintainer-clean-generic \ ++ mostlyclean mostlyclean-compile mostlyclean-generic \ ++ mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \ ++ uninstall-am uninstall-info-am uninstall-libexecPROGRAMS \ ++ uninstall-serverDATA uninstall-uiDATA + + + $(server_in_files): $(server_in_files:.server.in=.server.in.in) +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/applets/Makefile.in gnome-power-manager-2.24.0.new/applets/Makefile.in +--- gnome-power-manager-2.24.0/applets/Makefile.in 2008-09-22 22:46:11.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/applets/Makefile.in 2008-11-20 18:37:24.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -13,11 +13,15 @@ + # PARTICULAR PURPOSE. + + @SET_MAKE@ ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = .. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -35,7 +39,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -45,19 +52,18 @@ + DIST_SOURCES = + RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ +- install-dvi-recursive install-exec-recursive \ +- install-html-recursive install-info-recursive \ +- install-pdf-recursive install-ps-recursive install-recursive \ +- installcheck-recursive installdirs-recursive pdf-recursive \ +- ps-recursive uninstall-recursive +-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ +- distclean-recursive maintainer-clean-recursive ++ install-exec-recursive install-info-recursive \ ++ install-recursive installcheck-recursive installdirs-recursive \ ++ pdf-recursive ps-recursive uninstall-info-recursive \ ++ uninstall-recursive + ETAGS = etags + CTAGS = ctags + DIST_SUBDIRS = $(SUBDIRS) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -73,10 +79,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -88,17 +90,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -122,8 +130,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -153,6 +174,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -165,16 +187,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -215,13 +241,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -233,7 +256,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -252,6 +274,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -261,11 +284,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + SUBDIRS = brightness inhibit + all: all-recursive + +@@ -306,6 +326,10 @@ + clean-libtool: + -rm -rf .libs _libs + ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: ++ + # This directory's subdirectories are mostly independent; you can cd + # into them and run `make' without going through this Makefile. + # To change the values of `make' variables: instead of editing Makefiles, +@@ -337,7 +361,8 @@ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +-$(RECURSIVE_CLEAN_TARGETS): ++mostlyclean-recursive clean-recursive distclean-recursive \ ++maintainer-clean-recursive: + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ +@@ -381,8 +406,8 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + mkid -fID $$unique + tags: TAGS + +@@ -407,8 +432,8 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +@@ -418,12 +443,13 @@ + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ ++ here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique +@@ -437,21 +463,22 @@ + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -465,7 +492,7 @@ + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ +- || $(MKDIR_P) "$(distdir)/$$subdir" \ ++ || $(mkdir_p) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ +@@ -473,8 +500,6 @@ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ +- am__remove_distdir=: \ +- am__skip_length_check=: \ + distdir) \ + || exit 1; \ + fi; \ +@@ -514,7 +539,8 @@ + + distclean: distclean-recursive + -rm -f Makefile +-distclean-am: clean-am distclean-generic distclean-tags ++distclean-am: clean-am distclean-generic distclean-libtool \ ++ distclean-tags + + dvi: dvi-recursive + +@@ -528,20 +554,12 @@ + + install-data-am: + +-install-dvi: install-dvi-recursive +- + install-exec-am: + +-install-html: install-html-recursive +- + install-info: install-info-recursive + + install-man: + +-install-pdf: install-pdf-recursive +- +-install-ps: install-ps-recursive +- + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -560,24 +578,22 @@ + + ps-am: + +-uninstall-am: ++uninstall-am: uninstall-info-am + +-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ +- install-strip ++uninstall-info: uninstall-info-recursive + +-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ +- all all-am check check-am clean clean-generic clean-libtool \ +- ctags ctags-recursive distclean distclean-generic \ +- distclean-libtool distclean-tags distdir dvi dvi-am html \ ++.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \ ++ clean clean-generic clean-libtool clean-recursive ctags \ ++ ctags-recursive distclean distclean-generic distclean-libtool \ ++ distclean-recursive distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ +- install-data-am install-dvi install-dvi-am install-exec \ +- install-exec-am install-html install-html-am install-info \ +- install-info-am install-man install-pdf install-pdf-am \ +- install-ps install-ps-am install-strip installcheck \ ++ install-data-am install-exec install-exec-am install-info \ ++ install-info-am install-man install-strip installcheck \ + installcheck-am installdirs installdirs-am maintainer-clean \ +- maintainer-clean-generic mostlyclean mostlyclean-generic \ +- mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ +- uninstall uninstall-am ++ maintainer-clean-generic maintainer-clean-recursive \ ++ mostlyclean mostlyclean-generic mostlyclean-libtool \ ++ mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \ ++ uninstall uninstall-am uninstall-info-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/autom4te.cache/output.0 gnome-power-manager-2.24.0.new/autom4te.cache/output.0 +--- gnome-power-manager-2.24.0/autom4te.cache/output.0 1970-01-01 01:00:00.000000000 +0100 ++++ gnome-power-manager-2.24.0.new/autom4te.cache/output.0 2008-11-20 18:37:11.000000000 +0100 +@@ -0,0 +1,19955 @@ ++@%:@! /bin/sh ++@%:@ Guess values for system-dependent variables and create Makefiles. ++@%:@ Generated by GNU Autoconf 2.61 for gnome-power-manager 2.24.0. ++@%:@ ++@%:@ Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, ++@%:@ 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. ++@%:@ This configure script is free software; the Free Software Foundation ++@%:@ gives unlimited permission to copy, distribute and modify it. ++## --------------------- ## ++## M4sh Initialization. ## ++## --------------------- ## ++ ++# Be more Bourne compatible ++DUALCASE=1; export DUALCASE # for MKS sh ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++ ++ ++# PATH needs CR ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits ++ ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ echo "#! /bin/sh" >conf$$.sh ++ echo "exit 0" >>conf$$.sh ++ chmod +x conf$$.sh ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then ++ PATH_SEPARATOR=';' ++ else ++ PATH_SEPARATOR=: ++ fi ++ rm -f conf$$.sh ++fi ++ ++# Support unset when possible. ++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then ++ as_unset=unset ++else ++ as_unset=false ++fi ++ ++ ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++as_nl=' ++' ++IFS=" "" $as_nl" ++ ++# Find who we are. Look in the path if we contain no directory separator. ++case $0 in ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 ++fi ++if test ! -f "$as_myself"; then ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ { (exit 1); exit 1; } ++fi ++ ++# Work around bugs in pre-3.0 UWIN ksh. ++for as_var in ENV MAIL MAILPATH ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++done ++PS1='$ ' ++PS2='> ' ++PS4='+ ' ++ ++# NLS nuisances. ++for as_var in \ ++ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ ++ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ ++ LC_TELEPHONE LC_TIME ++do ++ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then ++ eval $as_var=C; export $as_var ++ else ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++ fi ++done ++ ++# Required to use basename. ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then ++ as_expr=expr ++else ++ as_expr=false ++fi ++ ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then ++ as_basename=basename ++else ++ as_basename=false ++fi ++ ++ ++# Name of the executable. ++as_me=`$as_basename -- "$0" || ++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ ++ X"$0" : 'X\(//\)$' \| \ ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || ++echo X/"$0" | ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ ++# CDPATH. ++$as_unset CDPATH ++ ++ ++if test "x$CONFIG_SHELL" = x; then ++ if (eval ":") 2>/dev/null; then ++ as_have_required=yes ++else ++ as_have_required=no ++fi ++ ++ if test $as_have_required = yes && (eval ": ++(as_func_return () { ++ (exit \$1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} ++ ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. ++fi ++ ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi ++ ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi ++ ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test \$exitcode = 0) || { (exit 1); exit 1; } ++ ++( ++ as_lineno_1=\$LINENO ++ as_lineno_2=\$LINENO ++ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && ++ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } ++") 2> /dev/null; then ++ : ++else ++ as_candidate_shells= ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ case $as_dir in ++ /*) ++ for as_base in sh bash ksh sh5; do ++ as_candidate_shells="$as_candidate_shells $as_dir/$as_base" ++ done;; ++ esac ++done ++IFS=$as_save_IFS ++ ++ ++ for as_shell in $as_candidate_shells $SHELL; do ++ # Try only shells that exist, to save several forks. ++ if { test -f "$as_shell" || test -f "$as_shell.exe"; } && ++ { ("$as_shell") 2> /dev/null <<\_ASEOF ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++: ++_ASEOF ++}; then ++ CONFIG_SHELL=$as_shell ++ as_have_required=yes ++ if { "$as_shell" 2> /dev/null <<\_ASEOF ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++: ++(as_func_return () { ++ (exit $1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} ++ ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. ++fi ++ ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi ++ ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi ++ ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = "$1" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test $exitcode = 0) || { (exit 1); exit 1; } ++ ++( ++ as_lineno_1=$LINENO ++ as_lineno_2=$LINENO ++ test "x$as_lineno_1" != "x$as_lineno_2" && ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } ++ ++_ASEOF ++}; then ++ break ++fi ++ ++fi ++ ++ done ++ ++ if test "x$CONFIG_SHELL" != x; then ++ for as_var in BASH_ENV ENV ++ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++ done ++ export CONFIG_SHELL ++ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} ++fi ++ ++ ++ if test $as_have_required = no; then ++ echo This script requires a shell more modern than all the ++ echo shells that I found on your system. Please install a ++ echo modern shell, or manually run the script under such a ++ echo shell if you do have one. ++ { (exit 1); exit 1; } ++fi ++ ++ ++fi ++ ++fi ++ ++ ++ ++(eval "as_func_return () { ++ (exit \$1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} ++ ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. ++fi ++ ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi ++ ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi ++ ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test \$exitcode = 0") || { ++ echo No shell found that supports shell functions. ++ echo Please tell autoconf@gnu.org about your system, ++ echo including any error possibly output before this ++ echo message ++} ++ ++ ++ ++ as_lineno_1=$LINENO ++ as_lineno_2=$LINENO ++ test "x$as_lineno_1" != "x$as_lineno_2" && ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { ++ ++ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO ++ # uniformly replaced by the line number. The first 'sed' inserts a ++ # line-number line after each line using $LINENO; the second 'sed' ++ # does the real work. The second script uses 'N' to pair each ++ # line-number line with the line containing $LINENO, and appends ++ # trailing '-' during substitution so that $LINENO is not a special ++ # case at line end. ++ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the ++ # scripts with optimization help from Paolo Bonzini. Blame Lee ++ # E. McMahon (1931-1989) for sed's syntax. :-) ++ sed -n ' ++ p ++ /[$]LINENO/= ++ ' <$as_myself | ++ sed ' ++ s/[$]LINENO.*/&-/ ++ t lineno ++ b ++ :lineno ++ N ++ :loop ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ ++ t loop ++ s/-\n.*// ++ ' >$as_me.lineno && ++ chmod +x "$as_me.lineno" || ++ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 ++ { (exit 1); exit 1; }; } ++ ++ # Don't try to exec as it changes $[0], causing all sort of problems ++ # (the dirname of $[0] is not the place where we might find the ++ # original and so on. Autoconf is especially sensitive to this). ++ . "./$as_me.lineno" ++ # Exit status is that of the last command. ++ exit ++} ++ ++ ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false ++fi ++ ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in ++-n*) ++ case `echo 'x\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ *) ECHO_C='\c';; ++ esac;; ++*) ++ ECHO_N='-n';; ++esac ++ ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then ++ as_expr=expr ++else ++ as_expr=false ++fi ++ ++rm -f conf$$ conf$$.exe conf$$.file ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file ++else ++ rm -f conf$$.dir ++ mkdir conf$$.dir ++fi ++echo >conf$$.file ++if ln -s conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || ++ as_ln_s='cp -p' ++elif ln conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s=ln ++else ++ as_ln_s='cp -p' ++fi ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null ++ ++if mkdir -p . 2>/dev/null; then ++ as_mkdir_p=: ++else ++ test -d ./-p && rmdir ./-p ++ as_mkdir_p=false ++fi ++ ++if test -x / >/dev/null 2>&1; then ++ as_test_x='test -x' ++else ++ if ls -dL / >/dev/null 2>&1; then ++ as_ls_L_option=L ++ else ++ as_ls_L_option= ++ fi ++ as_test_x=' ++ eval sh -c '\'' ++ if test -d "$1"; then ++ test -d "$1/."; ++ else ++ case $1 in ++ -*)set "./$1";; ++ esac; ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ++ ???[sx]*):;;*)false;;esac;fi ++ '\'' sh ++ ' ++fi ++as_executable_p=$as_test_x ++ ++# Sed expression to map a string onto a valid CPP name. ++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" ++ ++# Sed expression to map a string onto a valid variable name. ++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" ++ ++ ++ ++ ++# Check that we are running under the correct shell. ++SHELL=${CONFIG_SHELL-/bin/sh} ++ ++case X$lt_ECHO in ++X*--fallback-echo) ++ # Remove one level of quotation (which was required for Make). ++ ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','` ++ ;; ++esac ++ ++ECHO=${lt_ECHO-echo} ++if test "X$1" = X--no-reexec; then ++ # Discard the --no-reexec flag, and continue. ++ shift ++elif test "X$1" = X--fallback-echo; then ++ # Avoid inline document here, it may be left over ++ : ++elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then ++ # Yippee, $ECHO works! ++ : ++else ++ # Restart under the correct shell. ++ exec $SHELL "$0" --no-reexec ${1+"$@"} ++fi ++ ++if test "X$1" = X--fallback-echo; then ++ # used as fallback echo ++ shift ++ cat <<_LT_EOF ++$* ++_LT_EOF ++ exit 0 ++fi ++ ++# The HP-UX ksh and POSIX shell print the target directory to stdout ++# if CDPATH is set. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++ ++if test -z "$lt_ECHO"; then ++ if test "X${echo_test_string+set}" != Xset; then ++ # find a string as large as possible, as long as the shell can cope with it ++ for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do ++ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... ++ if { echo_test_string=`eval $cmd`; } 2>/dev/null && ++ { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null ++ then ++ break ++ fi ++ done ++ fi ++ ++ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ : ++ else ++ # The Solaris, AIX, and Digital Unix default echo programs unquote ++ # backslashes. This makes it impossible to quote backslashes using ++ # echo "$something" | sed 's/\\/\\\\/g' ++ # ++ # So, first we look for a working echo in the user's PATH. ++ ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for dir in $PATH /usr/ucb; do ++ IFS="$lt_save_ifs" ++ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && ++ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ ECHO="$dir/echo" ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ++ if test "X$ECHO" = Xecho; then ++ # We didn't find a better echo, so look for alternatives. ++ if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ # This shell has a builtin print -r that does the trick. ++ ECHO='print -r' ++ elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && ++ test "X$CONFIG_SHELL" != X/bin/ksh; then ++ # If we have ksh, try running configure again with it. ++ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} ++ export ORIGINAL_CONFIG_SHELL ++ CONFIG_SHELL=/bin/ksh ++ export CONFIG_SHELL ++ exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} ++ else ++ # Try using printf. ++ ECHO='printf %s\n' ++ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ # Cool, printf works ++ : ++ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && ++ test "X$echo_testing_string" = 'X\t' && ++ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL ++ export CONFIG_SHELL ++ SHELL="$CONFIG_SHELL" ++ export SHELL ++ ECHO="$CONFIG_SHELL $0 --fallback-echo" ++ elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && ++ test "X$echo_testing_string" = 'X\t' && ++ echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ ECHO="$CONFIG_SHELL $0 --fallback-echo" ++ else ++ # maybe with a smaller string... ++ prev=: ++ ++ for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do ++ if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null ++ then ++ break ++ fi ++ prev="$cmd" ++ done ++ ++ if test "$prev" != 'sed 50q "$0"'; then ++ echo_test_string=`eval $prev` ++ export echo_test_string ++ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} ++ else ++ # Oops. We lost completely, so just stick with echo. ++ ECHO=echo ++ fi ++ fi ++ fi ++ fi ++ fi ++fi ++ ++# Copy echo and quote the copy suitably for passing to libtool from ++# the Makefile, instead of quoting the original, which is used later. ++lt_ECHO=$ECHO ++if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then ++ lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" ++fi ++ ++ ++ ++ ++exec 7<&0 &1 ++ ++# Name of the host. ++# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, ++# so uname gets run too. ++ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` ++ ++# ++# Initializations. ++# ++ac_default_prefix=/usr/local ++ac_clean_files= ++ac_config_libobj_dir=. ++LIB@&t@OBJS= ++cross_compiling=no ++subdirs= ++MFLAGS= ++MAKEFLAGS= ++SHELL=${CONFIG_SHELL-/bin/sh} ++ ++# Identity of this package. ++PACKAGE_NAME='gnome-power-manager' ++PACKAGE_TARNAME='gnome-power-manager' ++PACKAGE_VERSION='2.24.0' ++PACKAGE_STRING='gnome-power-manager 2.24.0' ++PACKAGE_BUGREPORT='' ++ ++ac_unique_file="src" ++# Factoring default headers for most tests. ++ac_includes_default="\ ++#include ++#ifdef HAVE_SYS_TYPES_H ++# include ++#endif ++#ifdef HAVE_SYS_STAT_H ++# include ++#endif ++#ifdef STDC_HEADERS ++# include ++# include ++#else ++# ifdef HAVE_STDLIB_H ++# include ++# endif ++#endif ++#ifdef HAVE_STRING_H ++# if !defined STDC_HEADERS && defined HAVE_MEMORY_H ++# include ++# endif ++# include ++#endif ++#ifdef HAVE_STRINGS_H ++# include ++#endif ++#ifdef HAVE_INTTYPES_H ++# include ++#endif ++#ifdef HAVE_STDINT_H ++# include ++#endif ++#ifdef HAVE_UNISTD_H ++# include ++#endif" ++ ++ac_subst_vars='SHELL ++PATH_SEPARATOR ++PACKAGE_NAME ++PACKAGE_TARNAME ++PACKAGE_VERSION ++PACKAGE_STRING ++PACKAGE_BUGREPORT ++exec_prefix ++prefix ++program_transform_name ++bindir ++sbindir ++libexecdir ++datarootdir ++datadir ++sysconfdir ++sharedstatedir ++localstatedir ++includedir ++oldincludedir ++docdir ++infodir ++htmldir ++dvidir ++pdfdir ++psdir ++libdir ++localedir ++mandir ++DEFS ++ECHO_C ++ECHO_N ++ECHO_T ++LIBS ++build_alias ++host_alias ++target_alias ++INSTALL_PROGRAM ++INSTALL_SCRIPT ++INSTALL_DATA ++CYGPATH_W ++PACKAGE ++VERSION ++ACLOCAL ++AUTOCONF ++AUTOMAKE ++AUTOHEADER ++MAKEINFO ++install_sh ++STRIP ++INSTALL_STRIP_PROGRAM ++mkdir_p ++AWK ++SET_MAKE ++am__leading_dot ++AMTAR ++am__tar ++am__untar ++CC ++CFLAGS ++LDFLAGS ++CPPFLAGS ++ac_ct_CC ++EXEEXT ++OBJEXT ++DEPDIR ++am__include ++am__quote ++AMDEP_TRUE ++AMDEP_FALSE ++AMDEPBACKSLASH ++CCDEPMODE ++am__fastdepCC_TRUE ++am__fastdepCC_FALSE ++LIBTOOL ++build ++build_cpu ++build_vendor ++build_os ++host ++host_cpu ++host_vendor ++host_os ++SED ++GREP ++EGREP ++FGREP ++LD ++DUMPBIN ++ac_ct_DUMPBIN ++NM ++LN_S ++AR ++RANLIB ++lt_ECHO ++DSYMUTIL ++NMEDIT ++LIPO ++OTOOL ++OTOOL64 ++CPP ++INTLTOOL_DESKTOP_RULE ++INTLTOOL_DIRECTORY_RULE ++INTLTOOL_KEYS_RULE ++INTLTOOL_PROP_RULE ++INTLTOOL_OAF_RULE ++INTLTOOL_PONG_RULE ++INTLTOOL_SERVER_RULE ++INTLTOOL_SHEET_RULE ++INTLTOOL_SOUNDLIST_RULE ++INTLTOOL_UI_RULE ++INTLTOOL_XAM_RULE ++INTLTOOL_KBD_RULE ++INTLTOOL_XML_RULE ++INTLTOOL_XML_NOMERGE_RULE ++INTLTOOL_CAVES_RULE ++INTLTOOL_SCHEMAS_RULE ++INTLTOOL_THEME_RULE ++INTLTOOL_SERVICE_RULE ++INTLTOOL_POLICY_RULE ++XGETTEXT ++MSGMERGE ++MSGFMT ++INTLTOOL_EXTRACT ++INTLTOOL_MERGE ++INTLTOOL_UPDATE ++INTLTOOL_PERL ++ALL_LINGUAS ++DATADIRNAME ++WARN_CFLAGS ++PKG_CONFIG ++HELP_DIR ++OMF_DIR ++DOC_USER_FORMATS ++ENABLE_SK_TRUE ++ENABLE_SK_FALSE ++DISTCHECK_CONFIGURE_FLAGS ++HAVE_GNOME_DOC_UTILS_TRUE ++HAVE_GNOME_DOC_UTILS_FALSE ++GLIB_GENMARSHAL ++GETTEXT_PACKAGE ++USE_NLS ++MSGFMT_OPTS ++GMSGFMT ++CATALOGS ++CATOBJEXT ++GMOFILES ++INSTOBJEXT ++INTLLIBS ++PO_IN_DATADIR_TRUE ++PO_IN_DATADIR_FALSE ++POFILES ++POSUB ++MKINSTALLDIRS ++GLIB_REQUIRED ++GTK_REQUIRED ++GDK_REQUIRED ++LIBGNOME_REQUIRED ++LIBGNOMEUI_REQUIRED ++HAL_REQUIRED ++DBUS_REQUIRED ++LIBGLADE_REQUIRED ++LIBNOTIFY_REQUIRED ++LIBWNCK_REQUIRED ++CAIRO_REQUIRED ++UNIQUE_REQUIRED ++LIBPANEL_REQUIRED ++GSTREAMER_REQUIRED ++XRANDR_REQUIRED ++POLKIT_GNOME_REQUIRED ++GLIB_CFLAGS ++GLIB_LIBS ++HAL_CFLAGS ++HAL_LIBS ++GSTREAMER_CFLAGS ++GSTREAMER_LIBS ++DBUS_CFLAGS ++DBUS_LIBS ++GNOME_CFLAGS ++GNOME_LIBS ++GDK_CFLAGS ++GDK_LIBS ++XRANDR_CFLAGS ++XRANDR_LIBS ++GCONFTOOL ++GCONF_SCHEMA_CONFIG_SOURCE ++GCONF_SCHEMA_FILE_DIR ++GCONF_SCHEMAS_INSTALL_TRUE ++GCONF_SCHEMAS_INSTALL_FALSE ++XMKMF ++X_CFLAGS ++X_PRE_LIBS ++X_LIBS ++X_EXTRA_LIBS ++SYSCONFDIR ++DATADIR ++BINDIR ++SBINDIR ++DOCDIR ++POLKIT_CFLAGS ++POLKIT_LIBS ++HAVE_TESTS_TRUE ++HAVE_TESTS_FALSE ++POLKIT_GNOME_CFLAGS ++POLKIT_GNOME_LIBS ++HAVE_GCONF_DEFAULTS_TRUE ++HAVE_GCONF_DEFAULTS_FALSE ++HAVE_APPLETS_TRUE ++HAVE_APPLETS_FALSE ++XMLTO ++DOCBOOK_DOCS_ENABLED_TRUE ++DOCBOOK_DOCS_ENABLED_FALSE ++DBUS_SERVICES_DIR ++LIBNOTIFY_CFLAGS ++LIBNOTIFY_LIBS ++HAVE_LIBNOTIFY_TRUE ++HAVE_LIBNOTIFY_FALSE ++UNIQUE_CFLAGS ++UNIQUE_LIBS ++HAVE_UNIQUE_TRUE ++HAVE_UNIQUE_FALSE ++GPM_EXTRA_LIBS ++DOCBOOK2MAN ++HAVE_DOCBOOK2MAN_TRUE ++HAVE_DOCBOOK2MAN_FALSE ++LIB@&t@OBJS ++LTLIBOBJS' ++ac_subst_files='' ++ ac_precious_vars='build_alias ++host_alias ++target_alias ++CC ++CFLAGS ++LDFLAGS ++LIBS ++CPPFLAGS ++CPP ++PKG_CONFIG ++GLIB_CFLAGS ++GLIB_LIBS ++HAL_CFLAGS ++HAL_LIBS ++GSTREAMER_CFLAGS ++GSTREAMER_LIBS ++DBUS_CFLAGS ++DBUS_LIBS ++GNOME_CFLAGS ++GNOME_LIBS ++GDK_CFLAGS ++GDK_LIBS ++XRANDR_CFLAGS ++XRANDR_LIBS ++XMKMF ++POLKIT_CFLAGS ++POLKIT_LIBS ++POLKIT_GNOME_CFLAGS ++POLKIT_GNOME_LIBS ++LIBNOTIFY_CFLAGS ++LIBNOTIFY_LIBS ++UNIQUE_CFLAGS ++UNIQUE_LIBS' ++ ++ ++# Initialize some variables set by options. ++ac_init_help= ++ac_init_version=false ++# The variables have the same names as the options, with ++# dashes changed to underlines. ++cache_file=/dev/null ++exec_prefix=NONE ++no_create= ++no_recursion= ++prefix=NONE ++program_prefix=NONE ++program_suffix=NONE ++program_transform_name=s,x,x, ++silent= ++site= ++srcdir= ++verbose= ++x_includes=NONE ++x_libraries=NONE ++ ++# Installation directory options. ++# These are left unexpanded so users can "make install exec_prefix=/foo" ++# and all the variables that are supposed to be based on exec_prefix ++# by default will actually change. ++# Use braces instead of parens because sh, perl, etc. also accept them. ++# (The list follows the same order as the GNU Coding Standards.) ++bindir='${exec_prefix}/bin' ++sbindir='${exec_prefix}/sbin' ++libexecdir='${exec_prefix}/libexec' ++datarootdir='${prefix}/share' ++datadir='${datarootdir}' ++sysconfdir='${prefix}/etc' ++sharedstatedir='${prefix}/com' ++localstatedir='${prefix}/var' ++includedir='${prefix}/include' ++oldincludedir='/usr/include' ++docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' ++infodir='${datarootdir}/info' ++htmldir='${docdir}' ++dvidir='${docdir}' ++pdfdir='${docdir}' ++psdir='${docdir}' ++libdir='${exec_prefix}/lib' ++localedir='${datarootdir}/locale' ++mandir='${datarootdir}/man' ++ ++ac_prev= ++ac_dashdash= ++for ac_option ++do ++ # If the previous option needs an argument, assign it. ++ if test -n "$ac_prev"; then ++ eval $ac_prev=\$ac_option ++ ac_prev= ++ continue ++ fi ++ ++ case $ac_option in ++ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; ++ *) ac_optarg=yes ;; ++ esac ++ ++ # Accept the important Cygnus configure options, so we can diagnose typos. ++ ++ case $ac_dashdash$ac_option in ++ --) ++ ac_dashdash=yes ;; ++ ++ -bindir | --bindir | --bindi | --bind | --bin | --bi) ++ ac_prev=bindir ;; ++ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) ++ bindir=$ac_optarg ;; ++ ++ -build | --build | --buil | --bui | --bu) ++ ac_prev=build_alias ;; ++ -build=* | --build=* | --buil=* | --bui=* | --bu=*) ++ build_alias=$ac_optarg ;; ++ ++ -cache-file | --cache-file | --cache-fil | --cache-fi \ ++ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ++ ac_prev=cache_file ;; ++ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ ++ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) ++ cache_file=$ac_optarg ;; ++ ++ --config-cache | -C) ++ cache_file=config.cache ;; ++ ++ -datadir | --datadir | --datadi | --datad) ++ ac_prev=datadir ;; ++ -datadir=* | --datadir=* | --datadi=* | --datad=*) ++ datadir=$ac_optarg ;; ++ ++ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ ++ | --dataroo | --dataro | --datar) ++ ac_prev=datarootdir ;; ++ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ ++ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) ++ datarootdir=$ac_optarg ;; ++ ++ -disable-* | --disable-*) ++ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` ++ # Reject names that are not valid shell variable names. ++ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid feature name: $ac_feature" >&2 ++ { (exit 1); exit 1; }; } ++ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` ++ eval enable_$ac_feature=no ;; ++ ++ -docdir | --docdir | --docdi | --doc | --do) ++ ac_prev=docdir ;; ++ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) ++ docdir=$ac_optarg ;; ++ ++ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ++ ac_prev=dvidir ;; ++ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) ++ dvidir=$ac_optarg ;; ++ ++ -enable-* | --enable-*) ++ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` ++ # Reject names that are not valid shell variable names. ++ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid feature name: $ac_feature" >&2 ++ { (exit 1); exit 1; }; } ++ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` ++ eval enable_$ac_feature=\$ac_optarg ;; ++ ++ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ ++ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ ++ | --exec | --exe | --ex) ++ ac_prev=exec_prefix ;; ++ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ ++ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ ++ | --exec=* | --exe=* | --ex=*) ++ exec_prefix=$ac_optarg ;; ++ ++ -gas | --gas | --ga | --g) ++ # Obsolete; use --with-gas. ++ with_gas=yes ;; ++ ++ -help | --help | --hel | --he | -h) ++ ac_init_help=long ;; ++ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ++ ac_init_help=recursive ;; ++ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ++ ac_init_help=short ;; ++ ++ -host | --host | --hos | --ho) ++ ac_prev=host_alias ;; ++ -host=* | --host=* | --hos=* | --ho=*) ++ host_alias=$ac_optarg ;; ++ ++ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ++ ac_prev=htmldir ;; ++ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ ++ | --ht=*) ++ htmldir=$ac_optarg ;; ++ ++ -includedir | --includedir | --includedi | --included | --include \ ++ | --includ | --inclu | --incl | --inc) ++ ac_prev=includedir ;; ++ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ ++ | --includ=* | --inclu=* | --incl=* | --inc=*) ++ includedir=$ac_optarg ;; ++ ++ -infodir | --infodir | --infodi | --infod | --info | --inf) ++ ac_prev=infodir ;; ++ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) ++ infodir=$ac_optarg ;; ++ ++ -libdir | --libdir | --libdi | --libd) ++ ac_prev=libdir ;; ++ -libdir=* | --libdir=* | --libdi=* | --libd=*) ++ libdir=$ac_optarg ;; ++ ++ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ ++ | --libexe | --libex | --libe) ++ ac_prev=libexecdir ;; ++ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ ++ | --libexe=* | --libex=* | --libe=*) ++ libexecdir=$ac_optarg ;; ++ ++ -localedir | --localedir | --localedi | --localed | --locale) ++ ac_prev=localedir ;; ++ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) ++ localedir=$ac_optarg ;; ++ ++ -localstatedir | --localstatedir | --localstatedi | --localstated \ ++ | --localstate | --localstat | --localsta | --localst | --locals) ++ ac_prev=localstatedir ;; ++ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ ++ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) ++ localstatedir=$ac_optarg ;; ++ ++ -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ++ ac_prev=mandir ;; ++ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) ++ mandir=$ac_optarg ;; ++ ++ -nfp | --nfp | --nf) ++ # Obsolete; use --without-fp. ++ with_fp=no ;; ++ ++ -no-create | --no-create | --no-creat | --no-crea | --no-cre \ ++ | --no-cr | --no-c | -n) ++ no_create=yes ;; ++ ++ -no-recursion | --no-recursion | --no-recursio | --no-recursi \ ++ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ++ no_recursion=yes ;; ++ ++ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ ++ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ ++ | --oldin | --oldi | --old | --ol | --o) ++ ac_prev=oldincludedir ;; ++ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ ++ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ ++ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) ++ oldincludedir=$ac_optarg ;; ++ ++ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ++ ac_prev=prefix ;; ++ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) ++ prefix=$ac_optarg ;; ++ ++ -program-prefix | --program-prefix | --program-prefi | --program-pref \ ++ | --program-pre | --program-pr | --program-p) ++ ac_prev=program_prefix ;; ++ -program-prefix=* | --program-prefix=* | --program-prefi=* \ ++ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) ++ program_prefix=$ac_optarg ;; ++ ++ -program-suffix | --program-suffix | --program-suffi | --program-suff \ ++ | --program-suf | --program-su | --program-s) ++ ac_prev=program_suffix ;; ++ -program-suffix=* | --program-suffix=* | --program-suffi=* \ ++ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) ++ program_suffix=$ac_optarg ;; ++ ++ -program-transform-name | --program-transform-name \ ++ | --program-transform-nam | --program-transform-na \ ++ | --program-transform-n | --program-transform- \ ++ | --program-transform | --program-transfor \ ++ | --program-transfo | --program-transf \ ++ | --program-trans | --program-tran \ ++ | --progr-tra | --program-tr | --program-t) ++ ac_prev=program_transform_name ;; ++ -program-transform-name=* | --program-transform-name=* \ ++ | --program-transform-nam=* | --program-transform-na=* \ ++ | --program-transform-n=* | --program-transform-=* \ ++ | --program-transform=* | --program-transfor=* \ ++ | --program-transfo=* | --program-transf=* \ ++ | --program-trans=* | --program-tran=* \ ++ | --progr-tra=* | --program-tr=* | --program-t=*) ++ program_transform_name=$ac_optarg ;; ++ ++ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ++ ac_prev=pdfdir ;; ++ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) ++ pdfdir=$ac_optarg ;; ++ ++ -psdir | --psdir | --psdi | --psd | --ps) ++ ac_prev=psdir ;; ++ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) ++ psdir=$ac_optarg ;; ++ ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ++ | -silent | --silent | --silen | --sile | --sil) ++ silent=yes ;; ++ ++ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ++ ac_prev=sbindir ;; ++ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ ++ | --sbi=* | --sb=*) ++ sbindir=$ac_optarg ;; ++ ++ -sharedstatedir | --sharedstatedir | --sharedstatedi \ ++ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ ++ | --sharedst | --shareds | --shared | --share | --shar \ ++ | --sha | --sh) ++ ac_prev=sharedstatedir ;; ++ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ ++ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ ++ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ ++ | --sha=* | --sh=*) ++ sharedstatedir=$ac_optarg ;; ++ ++ -site | --site | --sit) ++ ac_prev=site ;; ++ -site=* | --site=* | --sit=*) ++ site=$ac_optarg ;; ++ ++ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ++ ac_prev=srcdir ;; ++ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) ++ srcdir=$ac_optarg ;; ++ ++ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ ++ | --syscon | --sysco | --sysc | --sys | --sy) ++ ac_prev=sysconfdir ;; ++ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ ++ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) ++ sysconfdir=$ac_optarg ;; ++ ++ -target | --target | --targe | --targ | --tar | --ta | --t) ++ ac_prev=target_alias ;; ++ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) ++ target_alias=$ac_optarg ;; ++ ++ -v | -verbose | --verbose | --verbos | --verbo | --verb) ++ verbose=yes ;; ++ ++ -version | --version | --versio | --versi | --vers | -V) ++ ac_init_version=: ;; ++ ++ -with-* | --with-*) ++ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` ++ # Reject names that are not valid shell variable names. ++ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid package name: $ac_package" >&2 ++ { (exit 1); exit 1; }; } ++ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` ++ eval with_$ac_package=\$ac_optarg ;; ++ ++ -without-* | --without-*) ++ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` ++ # Reject names that are not valid shell variable names. ++ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid package name: $ac_package" >&2 ++ { (exit 1); exit 1; }; } ++ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` ++ eval with_$ac_package=no ;; ++ ++ --x) ++ # Obsolete; use --with-x. ++ with_x=yes ;; ++ ++ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ ++ | --x-incl | --x-inc | --x-in | --x-i) ++ ac_prev=x_includes ;; ++ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ ++ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) ++ x_includes=$ac_optarg ;; ++ ++ -x-libraries | --x-libraries | --x-librarie | --x-librari \ ++ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ++ ac_prev=x_libraries ;; ++ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ ++ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) ++ x_libraries=$ac_optarg ;; ++ ++ -*) { echo "$as_me: error: unrecognized option: $ac_option ++Try \`$0 --help' for more information." >&2 ++ { (exit 1); exit 1; }; } ++ ;; ++ ++ *=*) ++ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` ++ # Reject names that are not valid shell variable names. ++ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 ++ { (exit 1); exit 1; }; } ++ eval $ac_envvar=\$ac_optarg ++ export $ac_envvar ;; ++ ++ *) ++ # FIXME: should be removed in autoconf 3.0. ++ echo "$as_me: WARNING: you should use --build, --host, --target" >&2 ++ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ echo "$as_me: WARNING: invalid host type: $ac_option" >&2 ++ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ++ ;; ++ ++ esac ++done ++ ++if test -n "$ac_prev"; then ++ ac_option=--`echo $ac_prev | sed 's/_/-/g'` ++ { echo "$as_me: error: missing argument to $ac_option" >&2 ++ { (exit 1); exit 1; }; } ++fi ++ ++# Be sure to have absolute directory names. ++for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ ++ datadir sysconfdir sharedstatedir localstatedir includedir \ ++ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ ++ libdir localedir mandir ++do ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ [\\/$]* | ?:[\\/]* ) continue;; ++ NONE | '' ) case $ac_var in *prefix ) continue;; esac;; ++ esac ++ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 ++ { (exit 1); exit 1; }; } ++done ++ ++# There might be people who depend on the old broken behavior: `$host' ++# used to hold the argument of --host etc. ++# FIXME: To remove some day. ++build=$build_alias ++host=$host_alias ++target=$target_alias ++ ++# FIXME: To remove some day. ++if test "x$host_alias" != x; then ++ if test "x$build_alias" = x; then ++ cross_compiling=maybe ++ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. ++ If a cross compiler is detected then cross compile mode will be used." >&2 ++ elif test "x$build_alias" != "x$host_alias"; then ++ cross_compiling=yes ++ fi ++fi ++ ++ac_tool_prefix= ++test -n "$host_alias" && ac_tool_prefix=$host_alias- ++ ++test "$silent" = yes && exec 6>/dev/null ++ ++ ++ac_pwd=`pwd` && test -n "$ac_pwd" && ++ac_ls_di=`ls -di .` && ++ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || ++ { echo "$as_me: error: Working directory cannot be determined" >&2 ++ { (exit 1); exit 1; }; } ++test "X$ac_ls_di" = "X$ac_pwd_ls_di" || ++ { echo "$as_me: error: pwd does not report name of working directory" >&2 ++ { (exit 1); exit 1; }; } ++ ++ ++# Find the source files, if location was not specified. ++if test -z "$srcdir"; then ++ ac_srcdir_defaulted=yes ++ # Try the directory containing this script, then the parent directory. ++ ac_confdir=`$as_dirname -- "$0" || ++$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$0" : 'X\(//\)[^/]' \| \ ++ X"$0" : 'X\(//\)$' \| \ ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$0" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ srcdir=$ac_confdir ++ if test ! -r "$srcdir/$ac_unique_file"; then ++ srcdir=.. ++ fi ++else ++ ac_srcdir_defaulted=no ++fi ++if test ! -r "$srcdir/$ac_unique_file"; then ++ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." ++ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 ++ { (exit 1); exit 1; }; } ++fi ++ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ++ac_abs_confdir=`( ++ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 ++ { (exit 1); exit 1; }; } ++ pwd)` ++# When building in place, set srcdir=. ++if test "$ac_abs_confdir" = "$ac_pwd"; then ++ srcdir=. ++fi ++# Remove unnecessary trailing slashes from srcdir. ++# Double slashes in file names in object file debugging info ++# mess up M-x gdb in Emacs. ++case $srcdir in ++*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; ++esac ++for ac_var in $ac_precious_vars; do ++ eval ac_env_${ac_var}_set=\${${ac_var}+set} ++ eval ac_env_${ac_var}_value=\$${ac_var} ++ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} ++ eval ac_cv_env_${ac_var}_value=\$${ac_var} ++done ++ ++# ++# Report the --help message. ++# ++if test "$ac_init_help" = "long"; then ++ # Omit some internal or obsolete options to make the list less imposing. ++ # This message is too long to be a string in the A/UX 3.1 sh. ++ cat <<_ACEOF ++\`configure' configures gnome-power-manager 2.24.0 to adapt to many kinds of systems. ++ ++Usage: $0 [OPTION]... [VAR=VALUE]... ++ ++To assign environment variables (e.g., CC, CFLAGS...), specify them as ++VAR=VALUE. See below for descriptions of some of the useful variables. ++ ++Defaults for the options are specified in brackets. ++ ++Configuration: ++ -h, --help display this help and exit ++ --help=short display options specific to this package ++ --help=recursive display the short help of all the included packages ++ -V, --version display version information and exit ++ -q, --quiet, --silent do not print \`checking...' messages ++ --cache-file=FILE cache test results in FILE [disabled] ++ -C, --config-cache alias for \`--cache-file=config.cache' ++ -n, --no-create do not create output files ++ --srcdir=DIR find the sources in DIR [configure dir or \`..'] ++ ++Installation directories: ++ --prefix=PREFIX install architecture-independent files in PREFIX ++ [$ac_default_prefix] ++ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX ++ [PREFIX] ++ ++By default, \`make install' will install all the files in ++\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify ++an installation prefix other than \`$ac_default_prefix' using \`--prefix', ++for instance \`--prefix=\$HOME'. ++ ++For better control, use the options below. ++ ++Fine tuning of the installation directories: ++ --bindir=DIR user executables [EPREFIX/bin] ++ --sbindir=DIR system admin executables [EPREFIX/sbin] ++ --libexecdir=DIR program executables [EPREFIX/libexec] ++ --sysconfdir=DIR read-only single-machine data [PREFIX/etc] ++ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] ++ --localstatedir=DIR modifiable single-machine data [PREFIX/var] ++ --libdir=DIR object code libraries [EPREFIX/lib] ++ --includedir=DIR C header files [PREFIX/include] ++ --oldincludedir=DIR C header files for non-gcc [/usr/include] ++ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] ++ --datadir=DIR read-only architecture-independent data [DATAROOTDIR] ++ --infodir=DIR info documentation [DATAROOTDIR/info] ++ --localedir=DIR locale-dependent data [DATAROOTDIR/locale] ++ --mandir=DIR man documentation [DATAROOTDIR/man] ++ --docdir=DIR documentation root @<:@DATAROOTDIR/doc/gnome-power-manager@:>@ ++ --htmldir=DIR html documentation [DOCDIR] ++ --dvidir=DIR dvi documentation [DOCDIR] ++ --pdfdir=DIR pdf documentation [DOCDIR] ++ --psdir=DIR ps documentation [DOCDIR] ++_ACEOF ++ ++ cat <<\_ACEOF ++ ++Program names: ++ --program-prefix=PREFIX prepend PREFIX to installed program names ++ --program-suffix=SUFFIX append SUFFIX to installed program names ++ --program-transform-name=PROGRAM run sed PROGRAM on installed program names ++ ++X features: ++ --x-includes=DIR X include files are in DIR ++ --x-libraries=DIR X library files are in DIR ++ ++System types: ++ --build=BUILD configure for building on BUILD [guessed] ++ --host=HOST cross-compile to build programs to run on HOST [BUILD] ++_ACEOF ++fi ++ ++if test -n "$ac_init_help"; then ++ case $ac_init_help in ++ short | recursive ) echo "Configuration of gnome-power-manager 2.24.0:";; ++ esac ++ cat <<\_ACEOF ++ ++Optional Features: ++ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) ++ --enable-FEATURE[=ARG] include FEATURE [ARG=yes] ++ --disable-dependency-tracking speeds up one-time build ++ --enable-dependency-tracking do not reject slow dependency extractors ++ --enable-shared@<:@=PKGS@:>@ build shared libraries @<:@default=yes@:>@ ++ --enable-static@<:@=PKGS@:>@ build static libraries @<:@default=yes@:>@ ++ --enable-fast-install@<:@=PKGS@:>@ ++ optimize for fast installation @<:@default=yes@:>@ ++ --disable-libtool-lock avoid locking (might break parallel builds) ++ --enable-compile-warnings=@<:@no/minimum/yes/maximum/error@:>@ ++ Turn on compiler warnings ++ --enable-iso-c Try to warn if code is not ISO C ++ --disable-scrollkeeper do not make updates to the scrollkeeper database ++ --disable-schemas-install Disable the schemas installation ++ --enable-policykit support PolicyKit permissions daemon (requires ++ polkitd) ++ --enable-checkfg Use check-foreground-console (Ubuntu systems) ++ --disable-xevents Support XEVENTS (requires a new x.org) ++ --enable-tests Build self tests ++ --disable-gconf-defaults ++ Allow setting gconf default settings ++ --disable-applets Build the extra power applets ++ --enable-docbook-docs build documentation (requires xmlto) ++ --enable-more-warnings Maximum compiler warnings ++ ++Optional Packages: ++ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] ++ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) ++ --with-pic try to use only PIC/non-PIC objects @<:@default=use ++ both@:>@ ++ --with-gnu-ld assume the C compiler uses GNU ld @<:@default=no@:>@ ++ --with-help-dir=DIR path to help docs ++ --with-omf-dir=DIR path to OMF files ++ --with-help-formats=FORMATS ++ list of formats ++ --with-gconf-source=sourceaddress ++ Config database for installing schema files. ++ --with-gconf-schema-file-dir=dir ++ Directory for installing schema files. ++ --with-x use the X Window System ++ --with-doc-dir= directory to install documentation ++ --with-dbus-services= ++ where D-BUS services directory is ++ --without-dpms-ext Include support for the DPMS extension. ++ ++Some influential environment variables: ++ CC C compiler command ++ CFLAGS C compiler flags ++ LDFLAGS linker flags, e.g. -L if you have libraries in a ++ nonstandard directory ++ LIBS libraries to pass to the linker, e.g. -l ++ CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if ++ you have headers in a nonstandard directory ++ CPP C preprocessor ++ PKG_CONFIG path to pkg-config utility ++ GLIB_CFLAGS C compiler flags for GLIB, overriding pkg-config ++ GLIB_LIBS linker flags for GLIB, overriding pkg-config ++ HAL_CFLAGS C compiler flags for HAL, overriding pkg-config ++ HAL_LIBS linker flags for HAL, overriding pkg-config ++ GSTREAMER_CFLAGS ++ C compiler flags for GSTREAMER, overriding pkg-config ++ GSTREAMER_LIBS ++ linker flags for GSTREAMER, overriding pkg-config ++ DBUS_CFLAGS C compiler flags for DBUS, overriding pkg-config ++ DBUS_LIBS linker flags for DBUS, overriding pkg-config ++ GNOME_CFLAGS ++ C compiler flags for GNOME, overriding pkg-config ++ GNOME_LIBS linker flags for GNOME, overriding pkg-config ++ GDK_CFLAGS C compiler flags for GDK, overriding pkg-config ++ GDK_LIBS linker flags for GDK, overriding pkg-config ++ XRANDR_CFLAGS ++ C compiler flags for XRANDR, overriding pkg-config ++ XRANDR_LIBS linker flags for XRANDR, overriding pkg-config ++ XMKMF Path to xmkmf, Makefile generator for X Window System ++ POLKIT_CFLAGS ++ C compiler flags for POLKIT, overriding pkg-config ++ POLKIT_LIBS linker flags for POLKIT, overriding pkg-config ++ POLKIT_GNOME_CFLAGS ++ C compiler flags for POLKIT_GNOME, overriding pkg-config ++ POLKIT_GNOME_LIBS ++ linker flags for POLKIT_GNOME, overriding pkg-config ++ LIBNOTIFY_CFLAGS ++ C compiler flags for LIBNOTIFY, overriding pkg-config ++ LIBNOTIFY_LIBS ++ linker flags for LIBNOTIFY, overriding pkg-config ++ UNIQUE_CFLAGS ++ C compiler flags for UNIQUE, overriding pkg-config ++ UNIQUE_LIBS linker flags for UNIQUE, overriding pkg-config ++ ++Use these variables to override the choices made by `configure' or to help ++it to find libraries and programs with nonstandard names/locations. ++ ++_ACEOF ++ac_status=$? ++fi ++ ++if test "$ac_init_help" = "recursive"; then ++ # If there are subdirs, report their specific --help. ++ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue ++ test -d "$ac_dir" || continue ++ ac_builddir=. ++ ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) ++ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; ++esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix ++ ++case $srcdir in ++ .) # We are building in place. ++ ac_srcdir=. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. ++ ac_srcdir=$srcdir$ac_dir_suffix; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; ++esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix ++ ++ cd "$ac_dir" || { ac_status=$?; continue; } ++ # Check for guested configure. ++ if test -f "$ac_srcdir/configure.gnu"; then ++ echo && ++ $SHELL "$ac_srcdir/configure.gnu" --help=recursive ++ elif test -f "$ac_srcdir/configure"; then ++ echo && ++ $SHELL "$ac_srcdir/configure" --help=recursive ++ else ++ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 ++ fi || ac_status=$? ++ cd "$ac_pwd" || { ac_status=$?; break; } ++ done ++fi ++ ++test -n "$ac_init_help" && exit $ac_status ++if $ac_init_version; then ++ cat <<\_ACEOF ++gnome-power-manager configure 2.24.0 ++generated by GNU Autoconf 2.61 ++ ++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, ++2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. ++This configure script is free software; the Free Software Foundation ++gives unlimited permission to copy, distribute and modify it. ++_ACEOF ++ exit ++fi ++cat >config.log <<_ACEOF ++This file contains any messages produced by compilers while ++running configure, to aid debugging if configure makes a mistake. ++ ++It was created by gnome-power-manager $as_me 2.24.0, which was ++generated by GNU Autoconf 2.61. Invocation command line was ++ ++ $ $0 $@ ++ ++_ACEOF ++exec 5>>config.log ++{ ++cat <<_ASUNAME ++@%:@@%:@ --------- @%:@@%:@ ++@%:@@%:@ Platform. @%:@@%:@ ++@%:@@%:@ --------- @%:@@%:@ ++ ++hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` ++uname -m = `(uname -m) 2>/dev/null || echo unknown` ++uname -r = `(uname -r) 2>/dev/null || echo unknown` ++uname -s = `(uname -s) 2>/dev/null || echo unknown` ++uname -v = `(uname -v) 2>/dev/null || echo unknown` ++ ++/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` ++/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` ++ ++/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` ++/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` ++/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` ++/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` ++/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` ++/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` ++/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` ++ ++_ASUNAME ++ ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ echo "PATH: $as_dir" ++done ++IFS=$as_save_IFS ++ ++} >&5 ++ ++cat >&5 <<_ACEOF ++ ++ ++@%:@@%:@ ----------- @%:@@%:@ ++@%:@@%:@ Core tests. @%:@@%:@ ++@%:@@%:@ ----------- @%:@@%:@ ++ ++_ACEOF ++ ++ ++# Keep a trace of the command line. ++# Strip out --no-create and --no-recursion so they do not pile up. ++# Strip out --silent because we don't want to record it for future runs. ++# Also quote any args containing shell meta-characters. ++# Make two passes to allow for proper duplicate-argument suppression. ++ac_configure_args= ++ac_configure_args0= ++ac_configure_args1= ++ac_must_keep_next=false ++for ac_pass in 1 2 ++do ++ for ac_arg ++ do ++ case $ac_arg in ++ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ++ | -silent | --silent | --silen | --sile | --sil) ++ continue ;; ++ *\'*) ++ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; ++ esac ++ case $ac_pass in ++ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; ++ 2) ++ ac_configure_args1="$ac_configure_args1 '$ac_arg'" ++ if test $ac_must_keep_next = true; then ++ ac_must_keep_next=false # Got value, back to normal. ++ else ++ case $ac_arg in ++ *=* | --config-cache | -C | -disable-* | --disable-* \ ++ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ ++ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ ++ | -with-* | --with-* | -without-* | --without-* | --x) ++ case "$ac_configure_args0 " in ++ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; ++ esac ++ ;; ++ -* ) ac_must_keep_next=true ;; ++ esac ++ fi ++ ac_configure_args="$ac_configure_args '$ac_arg'" ++ ;; ++ esac ++ done ++done ++$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } ++$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } ++ ++# When interrupted or exit'd, cleanup temporary files, and complete ++# config.log. We remove comments because anyway the quotes in there ++# would cause problems or look ugly. ++# WARNING: Use '\'' to represent an apostrophe within the trap. ++# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. ++trap 'exit_status=$? ++ # Save into config.log some information that might help in debugging. ++ { ++ echo ++ ++ cat <<\_ASBOX ++@%:@@%:@ ---------------- @%:@@%:@ ++@%:@@%:@ Cache variables. @%:@@%:@ ++@%:@@%:@ ---------------- @%:@@%:@ ++_ASBOX ++ echo ++ # The following way of writing the cache mishandles newlines in values, ++( ++ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ *) $as_unset $ac_var ;; ++ esac ;; ++ esac ++ done ++ (set) 2>&1 | ++ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) ++ sed -n \ ++ "s/'\''/'\''\\\\'\'''\''/g; ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ++ ;; #( ++ *) ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ++ ;; ++ esac | ++ sort ++) ++ echo ++ ++ cat <<\_ASBOX ++@%:@@%:@ ----------------- @%:@@%:@ ++@%:@@%:@ Output variables. @%:@@%:@ ++@%:@@%:@ ----------------- @%:@@%:@ ++_ASBOX ++ echo ++ for ac_var in $ac_subst_vars ++ do ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ esac ++ echo "$ac_var='\''$ac_val'\''" ++ done | sort ++ echo ++ ++ if test -n "$ac_subst_files"; then ++ cat <<\_ASBOX ++@%:@@%:@ ------------------- @%:@@%:@ ++@%:@@%:@ File substitutions. @%:@@%:@ ++@%:@@%:@ ------------------- @%:@@%:@ ++_ASBOX ++ echo ++ for ac_var in $ac_subst_files ++ do ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ esac ++ echo "$ac_var='\''$ac_val'\''" ++ done | sort ++ echo ++ fi ++ ++ if test -s confdefs.h; then ++ cat <<\_ASBOX ++@%:@@%:@ ----------- @%:@@%:@ ++@%:@@%:@ confdefs.h. @%:@@%:@ ++@%:@@%:@ ----------- @%:@@%:@ ++_ASBOX ++ echo ++ cat confdefs.h ++ echo ++ fi ++ test "$ac_signal" != 0 && ++ echo "$as_me: caught signal $ac_signal" ++ echo "$as_me: exit $exit_status" ++ } >&5 ++ rm -f core *.core core.conftest.* && ++ rm -f -r conftest* confdefs* conf$$* $ac_clean_files && ++ exit $exit_status ++' 0 ++for ac_signal in 1 2 13 15; do ++ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal ++done ++ac_signal=0 ++ ++# confdefs.h avoids OS command line length limits that DEFS can exceed. ++rm -f -r conftest* confdefs.h ++ ++# Predefined preprocessor variables. ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE_NAME "$PACKAGE_NAME" ++_ACEOF ++ ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE_TARNAME "$PACKAGE_TARNAME" ++_ACEOF ++ ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE_VERSION "$PACKAGE_VERSION" ++_ACEOF ++ ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE_STRING "$PACKAGE_STRING" ++_ACEOF ++ ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" ++_ACEOF ++ ++ ++# Let the site file select an alternate cache file if it wants to. ++# Prefer explicitly selected file to automatically selected ones. ++if test -n "$CONFIG_SITE"; then ++ set x "$CONFIG_SITE" ++elif test "x$prefix" != xNONE; then ++ set x "$prefix/share/config.site" "$prefix/etc/config.site" ++else ++ set x "$ac_default_prefix/share/config.site" \ ++ "$ac_default_prefix/etc/config.site" ++fi ++shift ++for ac_site_file ++do ++ if test -r "$ac_site_file"; then ++ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 ++echo "$as_me: loading site script $ac_site_file" >&6;} ++ sed 's/^/| /' "$ac_site_file" >&5 ++ . "$ac_site_file" ++ fi ++done ++ ++if test -r "$cache_file"; then ++ # Some versions of bash will fail to source /dev/null (special ++ # files actually), so we avoid doing that. ++ if test -f "$cache_file"; then ++ { echo "$as_me:$LINENO: loading cache $cache_file" >&5 ++echo "$as_me: loading cache $cache_file" >&6;} ++ case $cache_file in ++ [\\/]* | ?:[\\/]* ) . "$cache_file";; ++ *) . "./$cache_file";; ++ esac ++ fi ++else ++ { echo "$as_me:$LINENO: creating cache $cache_file" >&5 ++echo "$as_me: creating cache $cache_file" >&6;} ++ >$cache_file ++fi ++ ++# Check that the precious variables saved in the cache have kept the same ++# value. ++ac_cache_corrupted=false ++for ac_var in $ac_precious_vars; do ++ eval ac_old_set=\$ac_cv_env_${ac_var}_set ++ eval ac_new_set=\$ac_env_${ac_var}_set ++ eval ac_old_val=\$ac_cv_env_${ac_var}_value ++ eval ac_new_val=\$ac_env_${ac_var}_value ++ case $ac_old_set,$ac_new_set in ++ set,) ++ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 ++echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ++ ac_cache_corrupted=: ;; ++ ,set) ++ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 ++echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ++ ac_cache_corrupted=: ;; ++ ,);; ++ *) ++ if test "x$ac_old_val" != "x$ac_new_val"; then ++ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 ++echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ++ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 ++echo "$as_me: former value: $ac_old_val" >&2;} ++ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 ++echo "$as_me: current value: $ac_new_val" >&2;} ++ ac_cache_corrupted=: ++ fi;; ++ esac ++ # Pass precious variables to config.status. ++ if test "$ac_new_set" = set; then ++ case $ac_new_val in ++ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; ++ *) ac_arg=$ac_var=$ac_new_val ;; ++ esac ++ case " $ac_configure_args " in ++ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. ++ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; ++ esac ++ fi ++done ++if $ac_cache_corrupted; then ++ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 ++echo "$as_me: error: changes in the environment can compromise the build" >&2;} ++ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 ++echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++ ++ ++am__api_version="1.9" ++ac_aux_dir= ++for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do ++ if test -f "$ac_dir/install-sh"; then ++ ac_aux_dir=$ac_dir ++ ac_install_sh="$ac_aux_dir/install-sh -c" ++ break ++ elif test -f "$ac_dir/install.sh"; then ++ ac_aux_dir=$ac_dir ++ ac_install_sh="$ac_aux_dir/install.sh -c" ++ break ++ elif test -f "$ac_dir/shtool"; then ++ ac_aux_dir=$ac_dir ++ ac_install_sh="$ac_aux_dir/shtool install -c" ++ break ++ fi ++done ++if test -z "$ac_aux_dir"; then ++ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 ++echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++# These three variables are undocumented and unsupported, ++# and are intended to be withdrawn in a future Autoconf release. ++# They can cause serious problems if a builder's source tree is in a directory ++# whose full name contains unusual characters. ++ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ++ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ++ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. ++ ++ ++# Find a good install program. We prefer a C program (faster), ++# so one script is as good as another. But avoid the broken or ++# incompatible versions: ++# SysV /etc/install, /usr/sbin/install ++# SunOS /usr/etc/install ++# IRIX /sbin/install ++# AIX /bin/install ++# AmigaOS /C/install, which installs bootblocks on floppy discs ++# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag ++# AFS /usr/afsws/bin/install, which mishandles nonexistent args ++# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" ++# OS/2's system install, which has a completely different semantic ++# ./install, which can be erroneously created by make from ./install.sh. ++{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 ++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } ++if test -z "$INSTALL"; then ++if test "${ac_cv_path_install+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ # Account for people who put trailing slashes in PATH elements. ++case $as_dir/ in ++ ./ | .// | /cC/* | \ ++ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ++ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ ++ /usr/ucb/* ) ;; ++ *) ++ # OSF1 and SCO ODT 3.0 have their own names for install. ++ # Don't use installbsd from OSF since it installs stuff as root ++ # by default. ++ for ac_prog in ginstall scoinst install; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then ++ if test $ac_prog = install && ++ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then ++ # AIX install. It has an incompatible calling convention. ++ : ++ elif test $ac_prog = install && ++ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then ++ # program-specific install script used by HP pwplus--don't use. ++ : ++ else ++ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" ++ break 3 ++ fi ++ fi ++ done ++ done ++ ;; ++esac ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ if test "${ac_cv_path_install+set}" = set; then ++ INSTALL=$ac_cv_path_install ++ else ++ # As a last resort, use the slow shell script. Don't cache a ++ # value for INSTALL within a source directory, because that will ++ # break other packages using the cache if that directory is ++ # removed, or if the value is a relative name. ++ INSTALL=$ac_install_sh ++ fi ++fi ++{ echo "$as_me:$LINENO: result: $INSTALL" >&5 ++echo "${ECHO_T}$INSTALL" >&6; } ++ ++# Use test -z because SunOS4 sh mishandles braces in ${var-val}. ++# It thinks the first close brace ends the variable substitution. ++test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' ++ ++test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' ++ ++test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' ++ ++{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5 ++echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } ++# Just in case ++sleep 1 ++echo timestamp > conftest.file ++# Do `set' in a subshell so we don't clobber the current shell's ++# arguments. Must try -L first in case configure is actually a ++# symlink; some systems play weird games with the mod time of symlinks ++# (eg FreeBSD returns the mod time of the symlink's containing ++# directory). ++if ( ++ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` ++ if test "$*" = "X"; then ++ # -L didn't work. ++ set X `ls -t $srcdir/configure conftest.file` ++ fi ++ rm -f conftest.file ++ if test "$*" != "X $srcdir/configure conftest.file" \ ++ && test "$*" != "X conftest.file $srcdir/configure"; then ++ ++ # If neither matched, then we have a broken ls. This can happen ++ # if, for instance, CONFIG_SHELL is bash and it inherits a ++ # broken ls alias from the environment. This has actually ++ # happened. Such a system could not be considered "sane". ++ { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken ++alias in your environment" >&5 ++echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken ++alias in your environment" >&2;} ++ { (exit 1); exit 1; }; } ++ fi ++ ++ test "$2" = conftest.file ++ ) ++then ++ # Ok. ++ : ++else ++ { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! ++Check your system clock" >&5 ++echo "$as_me: error: newly created file is older than distributed files! ++Check your system clock" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++{ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++test "$program_prefix" != NONE && ++ program_transform_name="s&^&$program_prefix&;$program_transform_name" ++# Use a double $ so make ignores it. ++test "$program_suffix" != NONE && ++ program_transform_name="s&\$&$program_suffix&;$program_transform_name" ++# Double any \ or $. echo might interpret backslashes. ++# By default was `s,x,x', remove it if useless. ++cat <<\_ACEOF >conftest.sed ++s/[\\$]/&&/g;s/;s,x,x,$// ++_ACEOF ++program_transform_name=`echo $program_transform_name | sed -f conftest.sed` ++rm -f conftest.sed ++ ++# expand $ac_aux_dir to an absolute path ++am_aux_dir=`cd $ac_aux_dir && pwd` ++ ++test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" ++# Use eval to expand $SHELL ++if eval "$MISSING --run true"; then ++ am_missing_run="$MISSING --run " ++else ++ am_missing_run= ++ { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 ++echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} ++fi ++ ++if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then ++ # We used to keeping the `.' as first argument, in order to ++ # allow $(mkdir_p) to be used without argument. As in ++ # $(mkdir_p) $(somedir) ++ # where $(somedir) is conditionally defined. However this is wrong ++ # for two reasons: ++ # 1. if the package is installed by a user who cannot write `.' ++ # make install will fail, ++ # 2. the above comment should most certainly read ++ # $(mkdir_p) $(DESTDIR)$(somedir) ++ # so it does not work when $(somedir) is undefined and ++ # $(DESTDIR) is not. ++ # To support the latter case, we have to write ++ # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), ++ # so the `.' trick is pointless. ++ mkdir_p='mkdir -p --' ++else ++ # On NextStep and OpenStep, the `mkdir' command does not ++ # recognize any option. It will interpret all options as ++ # directories to create, and then abort because `.' already ++ # exists. ++ for d in ./-p ./--version; ++ do ++ test -d $d && rmdir $d ++ done ++ # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. ++ if test -f "$ac_aux_dir/mkinstalldirs"; then ++ mkdir_p='$(mkinstalldirs)' ++ else ++ mkdir_p='$(install_sh) -d' ++ fi ++fi ++ ++for ac_prog in gawk mawk nawk awk ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_AWK+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$AWK"; then ++ ac_cv_prog_AWK="$AWK" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_AWK="$ac_prog" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++AWK=$ac_cv_prog_AWK ++if test -n "$AWK"; then ++ { echo "$as_me:$LINENO: result: $AWK" >&5 ++echo "${ECHO_T}$AWK" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ test -n "$AWK" && break ++done ++ ++{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 ++echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } ++set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` ++if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.make <<\_ACEOF ++SHELL = /bin/sh ++all: ++ @echo '@@@%%%=$(MAKE)=@@@%%%' ++_ACEOF ++# GNU make sometimes prints "make[1]: Entering...", which would confuse us. ++case `${MAKE-make} -f conftest.make 2>/dev/null` in ++ *@@@%%%=?*=@@@%%%*) ++ eval ac_cv_prog_make_${ac_make}_set=yes;; ++ *) ++ eval ac_cv_prog_make_${ac_make}_set=no;; ++esac ++rm -f conftest.make ++fi ++if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ SET_MAKE= ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ SET_MAKE="MAKE=${MAKE-make}" ++fi ++ ++rm -rf .tst 2>/dev/null ++mkdir .tst 2>/dev/null ++if test -d .tst; then ++ am__leading_dot=. ++else ++ am__leading_dot=_ ++fi ++rmdir .tst 2>/dev/null ++ ++# test to see if srcdir already configured ++if test "`cd $srcdir && pwd`" != "`pwd`" && ++ test -f $srcdir/config.status; then ++ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 ++echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++# test whether we have cygpath ++if test -z "$CYGPATH_W"; then ++ if (cygpath --version) >/dev/null 2>/dev/null; then ++ CYGPATH_W='cygpath -w' ++ else ++ CYGPATH_W=echo ++ fi ++fi ++ ++ ++# Define the identity of the package. ++ PACKAGE=gnome-power-manager ++ VERSION=2.24.0 ++ ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE "$PACKAGE" ++_ACEOF ++ ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define VERSION "$VERSION" ++_ACEOF ++ ++# Some tools Automake needs. ++ ++ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} ++ ++ ++AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} ++ ++ ++AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} ++ ++ ++AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} ++ ++ ++MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} ++ ++install_sh=${install_sh-"$am_aux_dir/install-sh"} ++ ++# Installed binaries are usually stripped using `strip' when the user ++# run `make install-strip'. However `strip' might not be the right ++# tool to use in cross-compilation environments, therefore Automake ++# will honor the `STRIP' environment variable to overrule this program. ++if test "$cross_compiling" != no; then ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. ++set dummy ${ac_tool_prefix}strip; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_STRIP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$STRIP"; then ++ ac_cv_prog_STRIP="$STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_STRIP="${ac_tool_prefix}strip" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++STRIP=$ac_cv_prog_STRIP ++if test -n "$STRIP"; then ++ { echo "$as_me:$LINENO: result: $STRIP" >&5 ++echo "${ECHO_T}$STRIP" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_STRIP"; then ++ ac_ct_STRIP=$STRIP ++ # Extract the first word of "strip", so it can be a program name with args. ++set dummy strip; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_STRIP"; then ++ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_STRIP="strip" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP ++if test -n "$ac_ct_STRIP"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 ++echo "${ECHO_T}$ac_ct_STRIP" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_STRIP" = x; then ++ STRIP=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ STRIP=$ac_ct_STRIP ++ fi ++else ++ STRIP="$ac_cv_prog_STRIP" ++fi ++ ++fi ++INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" ++ ++# We need awk for the "check" target. The system "awk" is bad on ++# some platforms. ++# Always define AMTAR for backward compatibility. ++ ++AMTAR=${AMTAR-"${am_missing_run}tar"} ++ ++am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' ++ ++ ++ ++ ++ ++ac_config_headers="$ac_config_headers config.h" ++ ++ ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. ++set dummy ${ac_tool_prefix}gcc; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_CC+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$CC"; then ++ ac_cv_prog_CC="$CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_CC="${ac_tool_prefix}gcc" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++CC=$ac_cv_prog_CC ++if test -n "$CC"; then ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_CC"; then ++ ac_ct_CC=$CC ++ # Extract the first word of "gcc", so it can be a program name with args. ++set dummy gcc; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_CC+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_CC"; then ++ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_CC="gcc" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_CC=$ac_cv_prog_ac_ct_CC ++if test -n "$ac_ct_CC"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_CC" = x; then ++ CC="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ CC=$ac_ct_CC ++ fi ++else ++ CC="$ac_cv_prog_CC" ++fi ++ ++if test -z "$CC"; then ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. ++set dummy ${ac_tool_prefix}cc; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_CC+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$CC"; then ++ ac_cv_prog_CC="$CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_CC="${ac_tool_prefix}cc" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++CC=$ac_cv_prog_CC ++if test -n "$CC"; then ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ fi ++fi ++if test -z "$CC"; then ++ # Extract the first word of "cc", so it can be a program name with args. ++set dummy cc; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_CC+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$CC"; then ++ ac_cv_prog_CC="$CC" # Let the user override the test. ++else ++ ac_prog_rejected=no ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ++ ac_prog_rejected=yes ++ continue ++ fi ++ ac_cv_prog_CC="cc" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++if test $ac_prog_rejected = yes; then ++ # We found a bogon in the path, so make sure we never use it. ++ set dummy $ac_cv_prog_CC ++ shift ++ if test $@%:@ != 0; then ++ # We chose a different compiler from the bogus one. ++ # However, it has the same basename, so the bogon will be chosen ++ # first if we set CC to just the basename; use the full file name. ++ shift ++ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" ++ fi ++fi ++fi ++fi ++CC=$ac_cv_prog_CC ++if test -n "$CC"; then ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$CC"; then ++ if test -n "$ac_tool_prefix"; then ++ for ac_prog in cl.exe ++ do ++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. ++set dummy $ac_tool_prefix$ac_prog; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_CC+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$CC"; then ++ ac_cv_prog_CC="$CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_CC="$ac_tool_prefix$ac_prog" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++CC=$ac_cv_prog_CC ++if test -n "$CC"; then ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ test -n "$CC" && break ++ done ++fi ++if test -z "$CC"; then ++ ac_ct_CC=$CC ++ for ac_prog in cl.exe ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_CC+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_CC"; then ++ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_CC="$ac_prog" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_CC=$ac_cv_prog_ac_ct_CC ++if test -n "$ac_ct_CC"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ test -n "$ac_ct_CC" && break ++done ++ ++ if test "x$ac_ct_CC" = x; then ++ CC="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ CC=$ac_ct_CC ++ fi ++fi ++ ++fi ++ ++ ++test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH ++See \`config.log' for more details." >&5 ++echo "$as_me: error: no acceptable C compiler found in \$PATH ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++ ++# Provide some information about the compiler. ++echo "$as_me:$LINENO: checking for C compiler version" >&5 ++ac_compiler=`set X $ac_compile; echo $2` ++{ (ac_try="$ac_compiler --version >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler --version >&5") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++{ (ac_try="$ac_compiler -v >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -v >&5") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++{ (ac_try="$ac_compiler -V >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -V >&5") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++ ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++ac_clean_files_save=$ac_clean_files ++ac_clean_files="$ac_clean_files a.out a.exe b.out" ++# Try to create an executable without -o first, disregard a.out. ++# It will help us diagnose broken compilers, and finding out an intuition ++# of exeext. ++{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 ++echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; } ++ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` ++# ++# List of possible output files, starting from the most likely. ++# The algorithm is not robust to junk in `.', hence go to wildcards (a.*) ++# only as a last resort. b.out is created by i960 compilers. ++ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out' ++# ++# The IRIX 6 linker writes into existing files which may not be ++# executable, retaining their permissions. Remove them first so a ++# subsequent execution test works. ++ac_rmfiles= ++for ac_file in $ac_files ++do ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; ++ * ) ac_rmfiles="$ac_rmfiles $ac_file";; ++ esac ++done ++rm -f $ac_rmfiles ++ ++if { (ac_try="$ac_link_default" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link_default") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. ++# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' ++# in a Makefile. We should not override ac_cv_exeext if it was cached, ++# so that the user can short-circuit this test for compilers unknown to ++# Autoconf. ++for ac_file in $ac_files '' ++do ++ test -f "$ac_file" || continue ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ++ ;; ++ [ab].out ) ++ # We found the default executable, but exeext='' is most ++ # certainly right. ++ break;; ++ *.* ) ++ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; ++ then :; else ++ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` ++ fi ++ # We set ac_cv_exeext here because the later test for it is not ++ # safe: cross compilers may not add the suffix if given an `-o' ++ # argument, so we may need to know it at that point already. ++ # Even if this section looks crufty: it has the advantage of ++ # actually working. ++ break;; ++ * ) ++ break;; ++ esac ++done ++test "$ac_cv_exeext" = no && ac_cv_exeext= ++ ++else ++ ac_file='' ++fi ++ ++{ echo "$as_me:$LINENO: result: $ac_file" >&5 ++echo "${ECHO_T}$ac_file" >&6; } ++if test -z "$ac_file"; then ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++{ { echo "$as_me:$LINENO: error: C compiler cannot create executables ++See \`config.log' for more details." >&5 ++echo "$as_me: error: C compiler cannot create executables ++See \`config.log' for more details." >&2;} ++ { (exit 77); exit 77; }; } ++fi ++ ++ac_exeext=$ac_cv_exeext ++ ++# Check that the compiler produces executables we can run. If not, either ++# the compiler is broken, or we cross compile. ++{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5 ++echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; } ++# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 ++# If not cross compiling, check that we can run a simple program. ++if test "$cross_compiling" != yes; then ++ if { ac_try='./$ac_file' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ cross_compiling=no ++ else ++ if test "$cross_compiling" = maybe; then ++ cross_compiling=yes ++ else ++ { { echo "$as_me:$LINENO: error: cannot run C compiled programs. ++If you meant to cross compile, use \`--host'. ++See \`config.log' for more details." >&5 ++echo "$as_me: error: cannot run C compiled programs. ++If you meant to cross compile, use \`--host'. ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++ fi ++ fi ++fi ++{ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ ++rm -f a.out a.exe conftest$ac_cv_exeext b.out ++ac_clean_files=$ac_clean_files_save ++# Check that the compiler produces executables we can run. If not, either ++# the compiler is broken, or we cross compile. ++{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 ++echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; } ++{ echo "$as_me:$LINENO: result: $cross_compiling" >&5 ++echo "${ECHO_T}$cross_compiling" >&6; } ++ ++{ echo "$as_me:$LINENO: checking for suffix of executables" >&5 ++echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; } ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ # If both `conftest.exe' and `conftest' are `present' (well, observable) ++# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will ++# work properly (i.e., refer to `conftest.exe'), while it won't with ++# `rm'. ++for ac_file in conftest.exe conftest conftest.*; do ++ test -f "$ac_file" || continue ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; ++ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` ++ break;; ++ * ) break;; ++ esac ++done ++else ++ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link ++See \`config.log' for more details." >&5 ++echo "$as_me: error: cannot compute suffix of executables: cannot compile and link ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++rm -f conftest$ac_cv_exeext ++{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 ++echo "${ECHO_T}$ac_cv_exeext" >&6; } ++ ++rm -f conftest.$ac_ext ++EXEEXT=$ac_cv_exeext ++ac_exeext=$EXEEXT ++{ echo "$as_me:$LINENO: checking for suffix of object files" >&5 ++echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; } ++if test "${ac_cv_objext+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.o conftest.obj ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ for ac_file in conftest.o conftest.obj conftest.*; do ++ test -f "$ac_file" || continue; ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;; ++ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` ++ break;; ++ esac ++done ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile ++See \`config.log' for more details." >&5 ++echo "$as_me: error: cannot compute suffix of object files: cannot compile ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++rm -f conftest.$ac_cv_objext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 ++echo "${ECHO_T}$ac_cv_objext" >&6; } ++OBJEXT=$ac_cv_objext ++ac_objext=$OBJEXT ++{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 ++echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } ++if test "${ac_cv_c_compiler_gnu+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++#ifndef __GNUC__ ++ choke me ++#endif ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_compiler_gnu=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_compiler_gnu=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ac_cv_c_compiler_gnu=$ac_compiler_gnu ++ ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 ++echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } ++GCC=`test $ac_compiler_gnu = yes && echo yes` ++ac_test_CFLAGS=${CFLAGS+set} ++ac_save_CFLAGS=$CFLAGS ++{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 ++echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } ++if test "${ac_cv_prog_cc_g+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_save_c_werror_flag=$ac_c_werror_flag ++ ac_c_werror_flag=yes ++ ac_cv_prog_cc_g=no ++ CFLAGS="-g" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_prog_cc_g=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ CFLAGS="" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ : ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_c_werror_flag=$ac_save_c_werror_flag ++ CFLAGS="-g" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_prog_cc_g=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ac_c_werror_flag=$ac_save_c_werror_flag ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 ++echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } ++if test "$ac_test_CFLAGS" = set; then ++ CFLAGS=$ac_save_CFLAGS ++elif test $ac_cv_prog_cc_g = yes; then ++ if test "$GCC" = yes; then ++ CFLAGS="-g -O2" ++ else ++ CFLAGS="-g" ++ fi ++else ++ if test "$GCC" = yes; then ++ CFLAGS="-O2" ++ else ++ CFLAGS= ++ fi ++fi ++{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 ++echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } ++if test "${ac_cv_prog_cc_c89+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_cv_prog_cc_c89=no ++ac_save_CC=$CC ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++#include ++#include ++#include ++/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ ++struct buf { int x; }; ++FILE * (*rcsopen) (struct buf *, struct stat *, int); ++static char *e (p, i) ++ char **p; ++ int i; ++{ ++ return p[i]; ++} ++static char *f (char * (*g) (char **, int), char **p, ...) ++{ ++ char *s; ++ va_list v; ++ va_start (v,p); ++ s = g (p, va_arg (v,int)); ++ va_end (v); ++ return s; ++} ++ ++/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has ++ function prototypes and stuff, but not '\xHH' hex character constants. ++ These don't provoke an error unfortunately, instead are silently treated ++ as 'x'. The following induces an error, until -std is added to get ++ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an ++ array size at least. It's necessary to write '\x00'==0 to get something ++ that's true only with -std. */ ++int osf4_cc_array ['\x00' == 0 ? 1 : -1]; ++ ++/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters ++ inside strings and character constants. */ ++#define FOO(x) 'x' ++int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; ++ ++int test (int i, double x); ++struct s1 {int (*f) (int a);}; ++struct s2 {int (*f) (double a);}; ++int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); ++int argc; ++char **argv; ++int ++main () ++{ ++return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ++ ; ++ return 0; ++} ++_ACEOF ++for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ ++ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" ++do ++ CC="$ac_save_CC $ac_arg" ++ rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_prog_cc_c89=$ac_arg ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext ++ test "x$ac_cv_prog_cc_c89" != "xno" && break ++done ++rm -f conftest.$ac_ext ++CC=$ac_save_CC ++ ++fi ++# AC_CACHE_VAL ++case "x$ac_cv_prog_cc_c89" in ++ x) ++ { echo "$as_me:$LINENO: result: none needed" >&5 ++echo "${ECHO_T}none needed" >&6; } ;; ++ xno) ++ { echo "$as_me:$LINENO: result: unsupported" >&5 ++echo "${ECHO_T}unsupported" >&6; } ;; ++ *) ++ CC="$CC $ac_cv_prog_cc_c89" ++ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 ++echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; ++esac ++ ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++DEPDIR="${am__leading_dot}deps" ++ ++ac_config_commands="$ac_config_commands depfiles" ++ ++ ++am_make=${MAKE-make} ++cat > confinc << 'END' ++am__doit: ++ @echo done ++.PHONY: am__doit ++END ++# If we don't find an include directive, just comment out the code. ++{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 ++echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; } ++am__include="#" ++am__quote= ++_am_result=none ++# First try GNU make style include. ++echo "include confinc" > confmf ++# We grep out `Entering directory' and `Leaving directory' ++# messages which can occur if `w' ends up in MAKEFLAGS. ++# In particular we don't look at `^make:' because GNU make might ++# be invoked under some other name (usually "gmake"), in which ++# case it prints its new name instead of `make'. ++if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then ++ am__include=include ++ am__quote= ++ _am_result=GNU ++fi ++# Now try BSD make style include. ++if test "$am__include" = "#"; then ++ echo '.include "confinc"' > confmf ++ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then ++ am__include=.include ++ am__quote="\"" ++ _am_result=BSD ++ fi ++fi ++ ++ ++{ echo "$as_me:$LINENO: result: $_am_result" >&5 ++echo "${ECHO_T}$_am_result" >&6; } ++rm -f confinc confmf ++ ++# Check whether --enable-dependency-tracking was given. ++if test "${enable_dependency_tracking+set}" = set; then ++ enableval=$enable_dependency_tracking; ++fi ++ ++if test "x$enable_dependency_tracking" != xno; then ++ am_depcomp="$ac_aux_dir/depcomp" ++ AMDEPBACKSLASH='\' ++fi ++ ++ ++if test "x$enable_dependency_tracking" != xno; then ++ AMDEP_TRUE= ++ AMDEP_FALSE='#' ++else ++ AMDEP_TRUE='#' ++ AMDEP_FALSE= ++fi ++ ++ ++ ++ ++depcc="$CC" am_compiler_list= ++ ++{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 ++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } ++if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then ++ # We make a subdir and do the tests there. Otherwise we can end up ++ # making bogus files that we don't know about and never remove. For ++ # instance it was reported that on HP-UX the gcc test will end up ++ # making a dummy file named `D' -- because `-MD' means `put the output ++ # in D'. ++ mkdir conftest.dir ++ # Copy depcomp to subdir because otherwise we won't find it if we're ++ # using a relative directory. ++ cp "$am_depcomp" conftest.dir ++ cd conftest.dir ++ # We will build objects and dependencies in a subdirectory because ++ # it helps to detect inapplicable dependency modes. For instance ++ # both Tru64's cc and ICC support -MD to output dependencies as a ++ # side effect of compilation, but ICC will put the dependencies in ++ # the current directory while Tru64 will put them in the object ++ # directory. ++ mkdir sub ++ ++ am_cv_CC_dependencies_compiler_type=none ++ if test "$am_compiler_list" = ""; then ++ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` ++ fi ++ for depmode in $am_compiler_list; do ++ # Setup a source with many dependencies, because some compilers ++ # like to wrap large dependency lists on column 80 (with \), and ++ # we should not choose a depcomp mode which is confused by this. ++ # ++ # We need to recreate these files for each test, as the compiler may ++ # overwrite some of them when testing with obscure command lines. ++ # This happens at least with the AIX C compiler. ++ : > sub/conftest.c ++ for i in 1 2 3 4 5 6; do ++ echo '#include "conftst'$i'.h"' >> sub/conftest.c ++ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with ++ # Solaris 8's {/usr,}/bin/sh. ++ touch sub/conftst$i.h ++ done ++ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf ++ ++ case $depmode in ++ nosideeffect) ++ # after this tag, mechanisms are not by side-effect, so they'll ++ # only be used when explicitly requested ++ if test "x$enable_dependency_tracking" = xyes; then ++ continue ++ else ++ break ++ fi ++ ;; ++ none) break ;; ++ esac ++ # We check with `-c' and `-o' for the sake of the "dashmstdout" ++ # mode. It turns out that the SunPro C++ compiler does not properly ++ # handle `-M -o', and we need to detect this. ++ if depmode=$depmode \ ++ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ ++ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ ++ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ ++ >/dev/null 2>conftest.err && ++ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && ++ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then ++ # icc doesn't choke on unknown options, it will just issue warnings ++ # or remarks (even with -Werror). So we grep stderr for any message ++ # that says an option was ignored or not supported. ++ # When given -MP, icc 7.0 and 7.1 complain thusly: ++ # icc: Command line warning: ignoring option '-M'; no argument required ++ # The diagnosis changed in icc 8.0: ++ # icc: Command line remark: option '-MP' not supported ++ if (grep 'ignoring option' conftest.err || ++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else ++ am_cv_CC_dependencies_compiler_type=$depmode ++ break ++ fi ++ fi ++ done ++ ++ cd .. ++ rm -rf conftest.dir ++else ++ am_cv_CC_dependencies_compiler_type=none ++fi ++ ++fi ++{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 ++echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } ++CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type ++ ++ ++ ++if ++ test "x$enable_dependency_tracking" != xno \ ++ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then ++ am__fastdepCC_TRUE= ++ am__fastdepCC_FALSE='#' ++else ++ am__fastdepCC_TRUE='#' ++ am__fastdepCC_FALSE= ++fi ++ ++ ++if test "x$CC" != xcc; then ++ { echo "$as_me:$LINENO: checking whether $CC and cc understand -c and -o together" >&5 ++echo $ECHO_N "checking whether $CC and cc understand -c and -o together... $ECHO_C" >&6; } ++else ++ { echo "$as_me:$LINENO: checking whether cc understands -c and -o together" >&5 ++echo $ECHO_N "checking whether cc understands -c and -o together... $ECHO_C" >&6; } ++fi ++set dummy $CC; ac_cc=`echo $2 | ++ sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` ++if { as_var=ac_cv_prog_cc_${ac_cc}_c_o; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++# Make sure it works both with $CC and with simple cc. ++# We do the test twice because some compilers refuse to overwrite an ++# existing .o file with -o, though they will create one. ++ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5' ++rm -f conftest2.* ++if { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ test -f conftest2.$ac_objext && { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; ++then ++ eval ac_cv_prog_cc_${ac_cc}_c_o=yes ++ if test "x$CC" != xcc; then ++ # Test first that cc exists at all. ++ if { ac_try='cc -c conftest.$ac_ext >&5' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5' ++ rm -f conftest2.* ++ if { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ test -f conftest2.$ac_objext && { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; ++ then ++ # cc works too. ++ : ++ else ++ # cc exists but doesn't like -o. ++ eval ac_cv_prog_cc_${ac_cc}_c_o=no ++ fi ++ fi ++ fi ++else ++ eval ac_cv_prog_cc_${ac_cc}_c_o=no ++fi ++rm -f core conftest* ++ ++fi ++if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define NO_MINUS_C_MINUS_O 1 ++_ACEOF ++ ++fi ++ ++# FIXME: we rely on the cache variable name because ++# there is no other way. ++set dummy $CC ++ac_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` ++if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" != yes"; then ++ # Losing compiler, so override with the script. ++ # FIXME: It is wrong to rewrite CC. ++ # But if we don't then we get into trouble of one sort or another. ++ # A longer-term fix would be to have automake use am__CC in this case, ++ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" ++ CC="$am_aux_dir/compile $CC" ++fi ++ ++ ++# Find a good install program. We prefer a C program (faster), ++# so one script is as good as another. But avoid the broken or ++# incompatible versions: ++# SysV /etc/install, /usr/sbin/install ++# SunOS /usr/etc/install ++# IRIX /sbin/install ++# AIX /bin/install ++# AmigaOS /C/install, which installs bootblocks on floppy discs ++# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag ++# AFS /usr/afsws/bin/install, which mishandles nonexistent args ++# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" ++# OS/2's system install, which has a completely different semantic ++# ./install, which can be erroneously created by make from ./install.sh. ++{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 ++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } ++if test -z "$INSTALL"; then ++if test "${ac_cv_path_install+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ # Account for people who put trailing slashes in PATH elements. ++case $as_dir/ in ++ ./ | .// | /cC/* | \ ++ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ++ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ ++ /usr/ucb/* ) ;; ++ *) ++ # OSF1 and SCO ODT 3.0 have their own names for install. ++ # Don't use installbsd from OSF since it installs stuff as root ++ # by default. ++ for ac_prog in ginstall scoinst install; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then ++ if test $ac_prog = install && ++ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then ++ # AIX install. It has an incompatible calling convention. ++ : ++ elif test $ac_prog = install && ++ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then ++ # program-specific install script used by HP pwplus--don't use. ++ : ++ else ++ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" ++ break 3 ++ fi ++ fi ++ done ++ done ++ ;; ++esac ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ if test "${ac_cv_path_install+set}" = set; then ++ INSTALL=$ac_cv_path_install ++ else ++ # As a last resort, use the slow shell script. Don't cache a ++ # value for INSTALL within a source directory, because that will ++ # break other packages using the cache if that directory is ++ # removed, or if the value is a relative name. ++ INSTALL=$ac_install_sh ++ fi ++fi ++{ echo "$as_me:$LINENO: result: $INSTALL" >&5 ++echo "${ECHO_T}$INSTALL" >&6; } ++ ++# Use test -z because SunOS4 sh mishandles braces in ${var-val}. ++# It thinks the first close brace ends the variable substitution. ++test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' ++ ++test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' ++ ++test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' ++ ++case `pwd` in ++ *\ * | *\ *) ++ { echo "$as_me:$LINENO: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 ++echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; ++esac ++ ++ ++ ++macro_version='2.2.4' ++macro_revision='1.2976' ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ltmain="$ac_aux_dir/ltmain.sh" ++ ++# Make sure we can run config.sub. ++$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || ++ { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 ++echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} ++ { (exit 1); exit 1; }; } ++ ++{ echo "$as_me:$LINENO: checking build system type" >&5 ++echo $ECHO_N "checking build system type... $ECHO_C" >&6; } ++if test "${ac_cv_build+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_build_alias=$build_alias ++test "x$ac_build_alias" = x && ++ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` ++test "x$ac_build_alias" = x && ++ { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 ++echo "$as_me: error: cannot guess build type; you must specify one" >&2;} ++ { (exit 1); exit 1; }; } ++ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} ++ { (exit 1); exit 1; }; } ++ ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5 ++echo "${ECHO_T}$ac_cv_build" >&6; } ++case $ac_cv_build in ++*-*-*) ;; ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 ++echo "$as_me: error: invalid value of canonical build" >&2;} ++ { (exit 1); exit 1; }; };; ++esac ++build=$ac_cv_build ++ac_save_IFS=$IFS; IFS='-' ++set x $ac_cv_build ++shift ++build_cpu=$1 ++build_vendor=$2 ++shift; shift ++# Remember, the first character of IFS is used to create $*, ++# except with old shells: ++build_os=$* ++IFS=$ac_save_IFS ++case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac ++ ++ ++{ echo "$as_me:$LINENO: checking host system type" >&5 ++echo $ECHO_N "checking host system type... $ECHO_C" >&6; } ++if test "${ac_cv_host+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test "x$host_alias" = x; then ++ ac_cv_host=$ac_cv_build ++else ++ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5 ++echo "${ECHO_T}$ac_cv_host" >&6; } ++case $ac_cv_host in ++*-*-*) ;; ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 ++echo "$as_me: error: invalid value of canonical host" >&2;} ++ { (exit 1); exit 1; }; };; ++esac ++host=$ac_cv_host ++ac_save_IFS=$IFS; IFS='-' ++set x $ac_cv_host ++shift ++host_cpu=$1 ++host_vendor=$2 ++shift; shift ++# Remember, the first character of IFS is used to create $*, ++# except with old shells: ++host_os=$* ++IFS=$ac_save_IFS ++case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac ++ ++ ++{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 ++echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; } ++if test "${ac_cv_path_SED+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ ++ for ac_i in 1 2 3 4 5 6 7; do ++ ac_script="$ac_script$as_nl$ac_script" ++ done ++ echo "$ac_script" | sed 99q >conftest.sed ++ $as_unset ac_script || ac_script= ++ # Extract the first word of "sed gsed" to use in msg output ++if test -z "$SED"; then ++set dummy sed gsed; ac_prog_name=$2 ++if test "${ac_cv_path_SED+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_path_SED_found=false ++# Loop through the user's path and test for each of PROGNAME-LIST ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in sed gsed; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue ++ # Check for GNU ac_path_SED and select it if it is found. ++ # Check for GNU $ac_path_SED ++case `"$ac_path_SED" --version 2>&1` in ++*GNU*) ++ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; ++*) ++ ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ echo '' >> "conftest.nl" ++ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ ac_count=`expr $ac_count + 1` ++ if test $ac_count -gt ${ac_path_SED_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_SED="$ac_path_SED" ++ ac_path_SED_max=$ac_count ++ fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ ++ $ac_path_SED_found && break 3 ++ done ++done ++ ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ ++SED="$ac_cv_path_SED" ++if test -z "$SED"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in \$PATH" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in \$PATH" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++else ++ ac_cv_path_SED=$SED ++fi ++ ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5 ++echo "${ECHO_T}$ac_cv_path_SED" >&6; } ++ SED="$ac_cv_path_SED" ++ rm -f conftest.sed ++ ++test -z "$SED" && SED=sed ++Xsed="$SED -e 1s/^X//" ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 ++echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; } ++if test "${ac_cv_path_GREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ # Extract the first word of "grep ggrep" to use in msg output ++if test -z "$GREP"; then ++set dummy grep ggrep; ac_prog_name=$2 ++if test "${ac_cv_path_GREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_path_GREP_found=false ++# Loop through the user's path and test for each of PROGNAME-LIST ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in grep ggrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue ++ # Check for GNU ac_path_GREP and select it if it is found. ++ # Check for GNU $ac_path_GREP ++case `"$ac_path_GREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; ++*) ++ ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ echo 'GREP' >> "conftest.nl" ++ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ ac_count=`expr $ac_count + 1` ++ if test $ac_count -gt ${ac_path_GREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_GREP="$ac_path_GREP" ++ ac_path_GREP_max=$ac_count ++ fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ ++ $ac_path_GREP_found && break 3 ++ done ++done ++ ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ ++GREP="$ac_cv_path_GREP" ++if test -z "$GREP"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++else ++ ac_cv_path_GREP=$GREP ++fi ++ ++ ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 ++echo "${ECHO_T}$ac_cv_path_GREP" >&6; } ++ GREP="$ac_cv_path_GREP" ++ ++ ++{ echo "$as_me:$LINENO: checking for egrep" >&5 ++echo $ECHO_N "checking for egrep... $ECHO_C" >&6; } ++if test "${ac_cv_path_EGREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 ++ then ac_cv_path_EGREP="$GREP -E" ++ else ++ # Extract the first word of "egrep" to use in msg output ++if test -z "$EGREP"; then ++set dummy egrep; ac_prog_name=$2 ++if test "${ac_cv_path_EGREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_path_EGREP_found=false ++# Loop through the user's path and test for each of PROGNAME-LIST ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in egrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue ++ # Check for GNU ac_path_EGREP and select it if it is found. ++ # Check for GNU $ac_path_EGREP ++case `"$ac_path_EGREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; ++*) ++ ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ echo 'EGREP' >> "conftest.nl" ++ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ ac_count=`expr $ac_count + 1` ++ if test $ac_count -gt ${ac_path_EGREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_EGREP="$ac_path_EGREP" ++ ac_path_EGREP_max=$ac_count ++ fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ ++ $ac_path_EGREP_found && break 3 ++ done ++done ++ ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ ++EGREP="$ac_cv_path_EGREP" ++if test -z "$EGREP"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++else ++ ac_cv_path_EGREP=$EGREP ++fi ++ ++ ++ fi ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 ++echo "${ECHO_T}$ac_cv_path_EGREP" >&6; } ++ EGREP="$ac_cv_path_EGREP" ++ ++ ++{ echo "$as_me:$LINENO: checking for fgrep" >&5 ++echo $ECHO_N "checking for fgrep... $ECHO_C" >&6; } ++if test "${ac_cv_path_FGREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 ++ then ac_cv_path_FGREP="$GREP -F" ++ else ++ # Extract the first word of "fgrep" to use in msg output ++if test -z "$FGREP"; then ++set dummy fgrep; ac_prog_name=$2 ++if test "${ac_cv_path_FGREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_path_FGREP_found=false ++# Loop through the user's path and test for each of PROGNAME-LIST ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in fgrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue ++ # Check for GNU ac_path_FGREP and select it if it is found. ++ # Check for GNU $ac_path_FGREP ++case `"$ac_path_FGREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; ++*) ++ ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ echo 'FGREP' >> "conftest.nl" ++ "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ ac_count=`expr $ac_count + 1` ++ if test $ac_count -gt ${ac_path_FGREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_FGREP="$ac_path_FGREP" ++ ac_path_FGREP_max=$ac_count ++ fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ ++ $ac_path_FGREP_found && break 3 ++ done ++done ++ ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ ++FGREP="$ac_cv_path_FGREP" ++if test -z "$FGREP"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++else ++ ac_cv_path_FGREP=$FGREP ++fi ++ ++ ++ fi ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5 ++echo "${ECHO_T}$ac_cv_path_FGREP" >&6; } ++ FGREP="$ac_cv_path_FGREP" ++ ++ ++test -z "$GREP" && GREP=grep ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++# Check whether --with-gnu-ld was given. ++if test "${with_gnu_ld+set}" = set; then ++ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes ++else ++ with_gnu_ld=no ++fi ++ ++ac_prog=ld ++if test "$GCC" = yes; then ++ # Check if gcc -print-prog-name=ld gives a path. ++ { echo "$as_me:$LINENO: checking for ld used by $CC" >&5 ++echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; } ++ case $host in ++ *-*-mingw*) ++ # gcc leaves a trailing carriage return which upsets mingw ++ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; ++ *) ++ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; ++ esac ++ case $ac_prog in ++ # Accept absolute paths. ++ [\\/]* | ?:[\\/]*) ++ re_direlt='/[^/][^/]*/\.\./' ++ # Canonicalize the pathname of ld ++ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` ++ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ++ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` ++ done ++ test -z "$LD" && LD="$ac_prog" ++ ;; ++ "") ++ # If it fails, then pretend we aren't using GCC. ++ ac_prog=ld ++ ;; ++ *) ++ # If it is relative, then search for the first ld in PATH. ++ with_gnu_ld=unknown ++ ;; ++ esac ++elif test "$with_gnu_ld" = yes; then ++ { echo "$as_me:$LINENO: checking for GNU ld" >&5 ++echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; } ++else ++ { echo "$as_me:$LINENO: checking for non-GNU ld" >&5 ++echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; } ++fi ++if test "${lt_cv_path_LD+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -z "$LD"; then ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then ++ lt_cv_path_LD="$ac_dir/$ac_prog" ++ # Check to see if the program is GNU ld. I'd rather use --version, ++ # but apparently some variants of GNU ld only accept -v. ++ # Break only if it was the GNU/non-GNU ld that we prefer. ++ case `"$lt_cv_path_LD" -v 2>&1 &5 ++echo "${ECHO_T}$LD" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 ++echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} ++ { (exit 1); exit 1; }; } ++{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 ++echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; } ++if test "${lt_cv_prog_gnu_ld+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ # I'd rather use --version here, but apparently some GNU lds only accept -v. ++case `$LD -v 2>&1 &5 ++echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; } ++with_gnu_ld=$lt_cv_prog_gnu_ld ++ ++ ++ ++ ++ ++ ++ ++ ++ ++{ echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5 ++echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6; } ++if test "${lt_cv_path_NM+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$NM"; then ++ # Let the user override the test. ++ lt_cv_path_NM="$NM" ++else ++ lt_nm_to_check="${ac_tool_prefix}nm" ++ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then ++ lt_nm_to_check="$lt_nm_to_check nm" ++ fi ++ for lt_tmp_nm in $lt_nm_to_check; do ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ tmp_nm="$ac_dir/$lt_tmp_nm" ++ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then ++ # Check to see if the nm accepts a BSD-compat flag. ++ # Adding the `sed 1q' prevents false positives on HP-UX, which says: ++ # nm: unknown option "B" ignored ++ # Tru64's nm complains that /dev/null is an invalid object file ++ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in ++ */dev/null* | *'Invalid file or object type'*) ++ lt_cv_path_NM="$tmp_nm -B" ++ break ++ ;; ++ *) ++ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in ++ */dev/null*) ++ lt_cv_path_NM="$tmp_nm -p" ++ break ++ ;; ++ *) ++ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but ++ continue # so that we can try to find one that supports BSD flags ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ done ++ IFS="$lt_save_ifs" ++ done ++ : ${lt_cv_path_NM=no} ++fi ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 ++echo "${ECHO_T}$lt_cv_path_NM" >&6; } ++if test "$lt_cv_path_NM" != "no"; then ++ NM="$lt_cv_path_NM" ++else ++ # Didn't find any BSD compatible name lister, look for dumpbin. ++ if test -n "$ac_tool_prefix"; then ++ for ac_prog in "dumpbin -symbols" "link -dump -symbols" ++ do ++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. ++set dummy $ac_tool_prefix$ac_prog; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_DUMPBIN+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$DUMPBIN"; then ++ ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++DUMPBIN=$ac_cv_prog_DUMPBIN ++if test -n "$DUMPBIN"; then ++ { echo "$as_me:$LINENO: result: $DUMPBIN" >&5 ++echo "${ECHO_T}$DUMPBIN" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ test -n "$DUMPBIN" && break ++ done ++fi ++if test -z "$DUMPBIN"; then ++ ac_ct_DUMPBIN=$DUMPBIN ++ for ac_prog in "dumpbin -symbols" "link -dump -symbols" ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_DUMPBIN"; then ++ ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN ++if test -n "$ac_ct_DUMPBIN"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5 ++echo "${ECHO_T}$ac_ct_DUMPBIN" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ test -n "$ac_ct_DUMPBIN" && break ++done ++ ++ if test "x$ac_ct_DUMPBIN" = x; then ++ DUMPBIN=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ DUMPBIN=$ac_ct_DUMPBIN ++ fi ++fi ++ ++ ++ if test "$DUMPBIN" != ":"; then ++ NM="$DUMPBIN" ++ fi ++fi ++test -z "$NM" && NM=nm ++ ++ ++ ++ ++ ++ ++{ echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5 ++echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6; } ++if test "${lt_cv_nm_interface+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_nm_interface="BSD nm" ++ echo "int some_variable = 0;" > conftest.$ac_ext ++ (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&5) ++ (eval "$ac_compile" 2>conftest.err) ++ cat conftest.err >&5 ++ (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&5) ++ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) ++ cat conftest.err >&5 ++ (eval echo "\"\$as_me:__oline__: output\"" >&5) ++ cat conftest.out >&5 ++ if $GREP 'External.*some_variable' conftest.out > /dev/null; then ++ lt_cv_nm_interface="MS dumpbin" ++ fi ++ rm -f conftest* ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5 ++echo "${ECHO_T}$lt_cv_nm_interface" >&6; } ++ ++{ echo "$as_me:$LINENO: checking whether ln -s works" >&5 ++echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; } ++LN_S=$as_ln_s ++if test "$LN_S" = "ln -s"; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no, using $LN_S" >&5 ++echo "${ECHO_T}no, using $LN_S" >&6; } ++fi ++ ++# find the maximum length of command line arguments ++{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 ++echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; } ++if test "${lt_cv_sys_max_cmd_len+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ i=0 ++ teststring="ABCD" ++ ++ case $build_os in ++ msdosdjgpp*) ++ # On DJGPP, this test can blow up pretty badly due to problems in libc ++ # (any single argument exceeding 2000 bytes causes a buffer overrun ++ # during glob expansion). Even if it were fixed, the result of this ++ # check would be larger than it should be. ++ lt_cv_sys_max_cmd_len=12288; # 12K is about right ++ ;; ++ ++ gnu*) ++ # Under GNU Hurd, this test is not required because there is ++ # no limit to the length of command line arguments. ++ # Libtool will interpret -1 as no limit whatsoever ++ lt_cv_sys_max_cmd_len=-1; ++ ;; ++ ++ cygwin* | mingw*) ++ # On Win9x/ME, this test blows up -- it succeeds, but takes ++ # about 5 minutes as the teststring grows exponentially. ++ # Worse, since 9x/ME are not pre-emptively multitasking, ++ # you end up with a "frozen" computer, even though with patience ++ # the test eventually succeeds (with a max line length of 256k). ++ # Instead, let's just punt: use the minimum linelength reported by ++ # all of the supported platforms: 8192 (on NT/2K/XP). ++ lt_cv_sys_max_cmd_len=8192; ++ ;; ++ ++ amigaos*) ++ # On AmigaOS with pdksh, this test takes hours, literally. ++ # So we just punt and use a minimum line length of 8192. ++ lt_cv_sys_max_cmd_len=8192; ++ ;; ++ ++ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) ++ # This has been around since 386BSD, at least. Likely further. ++ if test -x /sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` ++ elif test -x /usr/sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` ++ else ++ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs ++ fi ++ # And add a safety zone ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ ;; ++ ++ interix*) ++ # We know the value 262144 and hardcode it with a safety zone (like BSD) ++ lt_cv_sys_max_cmd_len=196608 ++ ;; ++ ++ osf*) ++ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure ++ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not ++ # nice to cause kernel panics so lets avoid the loop below. ++ # First set a reasonable default. ++ lt_cv_sys_max_cmd_len=16384 ++ # ++ if test -x /sbin/sysconfig; then ++ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in ++ *1*) lt_cv_sys_max_cmd_len=-1 ;; ++ esac ++ fi ++ ;; ++ sco3.2v5*) ++ lt_cv_sys_max_cmd_len=102400 ++ ;; ++ sysv5* | sco5v6* | sysv4.2uw2*) ++ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` ++ if test -n "$kargmax"; then ++ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` ++ else ++ lt_cv_sys_max_cmd_len=32768 ++ fi ++ ;; ++ *) ++ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` ++ if test -n "$lt_cv_sys_max_cmd_len"; then ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ else ++ # Make teststring a little bigger before we do anything with it. ++ # a 1K string should be a reasonable start. ++ for i in 1 2 3 4 5 6 7 8 ; do ++ teststring=$teststring$teststring ++ done ++ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} ++ # If test is not a shell built-in, we'll probably end up computing a ++ # maximum length that is only half of the actual maximum length, but ++ # we can't tell. ++ while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ ++ = "XX$teststring$teststring"; } >/dev/null 2>&1 && ++ test $i != 17 # 1/2 MB should be enough ++ do ++ i=`expr $i + 1` ++ teststring=$teststring$teststring ++ done ++ # Only check the string length outside the loop. ++ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` ++ teststring= ++ # Add a significant safety factor because C++ compilers can tack on ++ # massive amounts of additional arguments before passing them to the ++ # linker. It appears as though 1/2 is a usable value. ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` ++ fi ++ ;; ++ esac ++ ++fi ++ ++if test -n $lt_cv_sys_max_cmd_len ; then ++ { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 ++echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; } ++else ++ { echo "$as_me:$LINENO: result: none" >&5 ++echo "${ECHO_T}none" >&6; } ++fi ++max_cmd_len=$lt_cv_sys_max_cmd_len ++ ++ ++ ++ ++ ++ ++: ${CP="cp -f"} ++: ${MV="mv -f"} ++: ${RM="rm -f"} ++ ++{ echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5 ++echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6; } ++# Try some XSI features ++xsi_shell=no ++( _lt_dummy="a/b/c" ++ test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ ++ = c,a/b,, \ ++ && eval 'test $(( 1 + 1 )) -eq 2 \ ++ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ ++ && xsi_shell=yes ++{ echo "$as_me:$LINENO: result: $xsi_shell" >&5 ++echo "${ECHO_T}$xsi_shell" >&6; } ++ ++ ++{ echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5 ++echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6; } ++lt_shell_append=no ++( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ ++ >/dev/null 2>&1 \ ++ && lt_shell_append=yes ++{ echo "$as_me:$LINENO: result: $lt_shell_append" >&5 ++echo "${ECHO_T}$lt_shell_append" >&6; } ++ ++ ++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then ++ lt_unset=unset ++else ++ lt_unset=false ++fi ++ ++ ++ ++ ++ ++# test EBCDIC or ASCII ++case `echo X|tr X '\101'` in ++ A) # ASCII based system ++ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr ++ lt_SP2NL='tr \040 \012' ++ lt_NL2SP='tr \015\012 \040\040' ++ ;; ++ *) # EBCDIC based system ++ lt_SP2NL='tr \100 \n' ++ lt_NL2SP='tr \r\n \100\100' ++ ;; ++esac ++ ++ ++ ++ ++ ++ ++ ++ ++ ++{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 ++echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; } ++if test "${lt_cv_ld_reload_flag+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_ld_reload_flag='-r' ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 ++echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; } ++reload_flag=$lt_cv_ld_reload_flag ++case $reload_flag in ++"" | " "*) ;; ++*) reload_flag=" $reload_flag" ;; ++esac ++reload_cmds='$LD$reload_flag -o $output$reload_objs' ++case $host_os in ++ darwin*) ++ if test "$GCC" = yes; then ++ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' ++ else ++ reload_cmds='$LD$reload_flag -o $output$reload_objs' ++ fi ++ ;; ++esac ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 ++echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; } ++if test "${lt_cv_deplibs_check_method+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_file_magic_cmd='$MAGIC_CMD' ++lt_cv_file_magic_test_file= ++lt_cv_deplibs_check_method='unknown' ++# Need to set the preceding variable on all platforms that support ++# interlibrary dependencies. ++# 'none' -- dependencies not supported. ++# `unknown' -- same as none, but documents that we really don't know. ++# 'pass_all' -- all dependencies passed with no checks. ++# 'test_compile' -- check by making test program. ++# 'file_magic [[regex]]' -- check by looking for files in library path ++# which responds to the $file_magic_cmd with a given extended regex. ++# If you have `file' or equivalent on your system and you're not sure ++# whether `pass_all' will *always* work, you probably want this one. ++ ++case $host_os in ++aix[4-9]*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++beos*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++bsdi[45]*) ++ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' ++ lt_cv_file_magic_cmd='/usr/bin/file -L' ++ lt_cv_file_magic_test_file=/shlib/libc.so ++ ;; ++ ++cygwin*) ++ # func_win32_libid is a shell function defined in ltmain.sh ++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' ++ lt_cv_file_magic_cmd='func_win32_libid' ++ ;; ++ ++mingw* | pw32*) ++ # Base MSYS/MinGW do not provide the 'file' command needed by ++ # func_win32_libid shell function, so use a weaker test based on 'objdump', ++ # unless we find 'file', for example because we are cross-compiling. ++ if ( file / ) >/dev/null 2>&1; then ++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' ++ lt_cv_file_magic_cmd='func_win32_libid' ++ else ++ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' ++ lt_cv_file_magic_cmd='$OBJDUMP -f' ++ fi ++ ;; ++ ++darwin* | rhapsody*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++freebsd* | dragonfly*) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then ++ case $host_cpu in ++ i*86 ) ++ # Not sure whether the presence of OpenBSD here was a mistake. ++ # Let's accept both of them until this is cleared up. ++ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' ++ lt_cv_file_magic_cmd=/usr/bin/file ++ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ++ ;; ++ esac ++ else ++ lt_cv_deplibs_check_method=pass_all ++ fi ++ ;; ++ ++gnu*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++hpux10.20* | hpux11*) ++ lt_cv_file_magic_cmd=/usr/bin/file ++ case $host_cpu in ++ ia64*) ++ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' ++ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ++ ;; ++ hppa*64*) ++ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' ++ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ++ ;; ++ *) ++ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' ++ lt_cv_file_magic_test_file=/usr/lib/libc.sl ++ ;; ++ esac ++ ;; ++ ++interix[3-9]*) ++ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' ++ ;; ++ ++irix5* | irix6* | nonstopux*) ++ case $LD in ++ *-32|*"-32 ") libmagic=32-bit;; ++ *-n32|*"-n32 ") libmagic=N32;; ++ *-64|*"-64 ") libmagic=64-bit;; ++ *) libmagic=never-match;; ++ esac ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++# This must be Linux ELF. ++linux* | k*bsd*-gnu) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' ++ else ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' ++ fi ++ ;; ++ ++newos6*) ++ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' ++ lt_cv_file_magic_cmd=/usr/bin/file ++ lt_cv_file_magic_test_file=/usr/lib/libnls.so ++ ;; ++ ++*nto* | *qnx*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++openbsd*) ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' ++ else ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' ++ fi ++ ;; ++ ++osf3* | osf4* | osf5*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++rdos*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++solaris*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++sysv4 | sysv4.3*) ++ case $host_vendor in ++ motorola) ++ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' ++ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ++ ;; ++ ncr) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ sequent) ++ lt_cv_file_magic_cmd='/bin/file' ++ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ++ ;; ++ sni) ++ lt_cv_file_magic_cmd='/bin/file' ++ lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" ++ lt_cv_file_magic_test_file=/lib/libc.so ++ ;; ++ siemens) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ pc) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ esac ++ ;; ++ ++tpf*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++esac ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 ++echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; } ++file_magic_cmd=$lt_cv_file_magic_cmd ++deplibs_check_method=$lt_cv_deplibs_check_method ++test -z "$deplibs_check_method" && deplibs_check_method=unknown ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. ++set dummy ${ac_tool_prefix}ar; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_AR+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$AR"; then ++ ac_cv_prog_AR="$AR" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_AR="${ac_tool_prefix}ar" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++AR=$ac_cv_prog_AR ++if test -n "$AR"; then ++ { echo "$as_me:$LINENO: result: $AR" >&5 ++echo "${ECHO_T}$AR" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_AR"; then ++ ac_ct_AR=$AR ++ # Extract the first word of "ar", so it can be a program name with args. ++set dummy ar; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_AR+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_AR"; then ++ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_AR="ar" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_AR=$ac_cv_prog_ac_ct_AR ++if test -n "$ac_ct_AR"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 ++echo "${ECHO_T}$ac_ct_AR" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_AR" = x; then ++ AR="false" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ AR=$ac_ct_AR ++ fi ++else ++ AR="$ac_cv_prog_AR" ++fi ++ ++test -z "$AR" && AR=ar ++test -z "$AR_FLAGS" && AR_FLAGS=cru ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. ++set dummy ${ac_tool_prefix}strip; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_STRIP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$STRIP"; then ++ ac_cv_prog_STRIP="$STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_STRIP="${ac_tool_prefix}strip" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++STRIP=$ac_cv_prog_STRIP ++if test -n "$STRIP"; then ++ { echo "$as_me:$LINENO: result: $STRIP" >&5 ++echo "${ECHO_T}$STRIP" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_STRIP"; then ++ ac_ct_STRIP=$STRIP ++ # Extract the first word of "strip", so it can be a program name with args. ++set dummy strip; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_STRIP"; then ++ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_STRIP="strip" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP ++if test -n "$ac_ct_STRIP"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 ++echo "${ECHO_T}$ac_ct_STRIP" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_STRIP" = x; then ++ STRIP=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ STRIP=$ac_ct_STRIP ++ fi ++else ++ STRIP="$ac_cv_prog_STRIP" ++fi ++ ++test -z "$STRIP" && STRIP=: ++ ++ ++ ++ ++ ++ ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. ++set dummy ${ac_tool_prefix}ranlib; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_RANLIB+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$RANLIB"; then ++ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++RANLIB=$ac_cv_prog_RANLIB ++if test -n "$RANLIB"; then ++ { echo "$as_me:$LINENO: result: $RANLIB" >&5 ++echo "${ECHO_T}$RANLIB" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_RANLIB"; then ++ ac_ct_RANLIB=$RANLIB ++ # Extract the first word of "ranlib", so it can be a program name with args. ++set dummy ranlib; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_RANLIB"; then ++ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_RANLIB="ranlib" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB ++if test -n "$ac_ct_RANLIB"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 ++echo "${ECHO_T}$ac_ct_RANLIB" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_RANLIB" = x; then ++ RANLIB=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ RANLIB=$ac_ct_RANLIB ++ fi ++else ++ RANLIB="$ac_cv_prog_RANLIB" ++fi ++ ++test -z "$RANLIB" && RANLIB=: ++ ++ ++ ++ ++ ++ ++# Determine commands to create old-style static archives. ++old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' ++old_postinstall_cmds='chmod 644 $oldlib' ++old_postuninstall_cmds= ++ ++if test -n "$RANLIB"; then ++ case $host_os in ++ openbsd*) ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" ++ ;; ++ *) ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" ++ ;; ++ esac ++ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} ++ ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++ ++# Allow CC to be a program name with arguments. ++compiler=$CC ++ ++ ++# Check for command to grab the raw symbol name followed by C symbol from nm. ++{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 ++echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; } ++if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ++# These are sane defaults that work on at least a few old systems. ++# [They come from Ultrix. What could be older than Ultrix?!! ;)] ++ ++# Character class describing NM global symbol codes. ++symcode='[BCDEGRST]' ++ ++# Regexp to match symbols that can be accessed directly from C. ++sympat='\([_A-Za-z][_A-Za-z0-9]*\)' ++ ++# Define system-specific variables. ++case $host_os in ++aix*) ++ symcode='[BCDT]' ++ ;; ++cygwin* | mingw* | pw32*) ++ symcode='[ABCDGISTW]' ++ ;; ++hpux*) ++ if test "$host_cpu" = ia64; then ++ symcode='[ABCDEGRST]' ++ fi ++ ;; ++irix* | nonstopux*) ++ symcode='[BCDEGRST]' ++ ;; ++osf*) ++ symcode='[BCDEGQRST]' ++ ;; ++solaris*) ++ symcode='[BDRT]' ++ ;; ++sco3.2v5*) ++ symcode='[DT]' ++ ;; ++sysv4.2uw2*) ++ symcode='[DT]' ++ ;; ++sysv5* | sco5v6* | unixware* | OpenUNIX*) ++ symcode='[ABDT]' ++ ;; ++sysv4) ++ symcode='[DFNSTU]' ++ ;; ++esac ++ ++# If we're using GNU nm, then use its standard symbol codes. ++case `$NM -V 2>&1` in ++*GNU* | *'with BFD'*) ++ symcode='[ABCDGIRSTW]' ;; ++esac ++ ++# Transform an extracted symbol line into a proper C declaration. ++# Some systems (esp. on ia64) link data and code symbols differently, ++# so use this general approach. ++lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" ++ ++# Transform an extracted symbol line into symbol name and symbol address ++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" ++ ++# Handle CRLF in mingw tool chain ++opt_cr= ++case $build_os in ++mingw*) ++ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ++ ;; ++esac ++ ++# Try without a prefix underscore, then with it. ++for ac_symprfx in "" "_"; do ++ ++ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. ++ symxfrm="\\1 $ac_symprfx\\2 \\2" ++ ++ # Write the raw and C identifiers. ++ if test "$lt_cv_nm_interface" = "MS dumpbin"; then ++ # Fake it for dumpbin and say T for any non-static function ++ # and D for any global variable. ++ # Also find C++ and __fastcall symbols from MSVC++, ++ # which start with @ or ?. ++ lt_cv_sys_global_symbol_pipe="$AWK '"\ ++" {last_section=section; section=\$ 3};"\ ++" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ ++" \$ 0!~/External *\|/{next};"\ ++" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ ++" {if(hide[section]) next};"\ ++" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ ++" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ ++" s[1]~/^[@?]/{print s[1], s[1]; next};"\ ++" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ ++" ' prfx=^$ac_symprfx" ++ else ++ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" ++ fi ++ ++ # Check to see that the pipe works correctly. ++ pipe_works=no ++ ++ rm -f conftest* ++ cat > conftest.$ac_ext <<_LT_EOF ++#ifdef __cplusplus ++extern "C" { ++#endif ++char nm_test_var; ++void nm_test_func(void); ++void nm_test_func(void){} ++#ifdef __cplusplus ++} ++#endif ++int main(){nm_test_var='a';nm_test_func();return(0);} ++_LT_EOF ++ ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ # Now try to grab the symbols. ++ nlist=conftest.nm ++ if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 ++ (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && test -s "$nlist"; then ++ # Try sorting and uniquifying the output. ++ if sort "$nlist" | uniq > "$nlist"T; then ++ mv -f "$nlist"T "$nlist" ++ else ++ rm -f "$nlist"T ++ fi ++ ++ # Make sure that we snagged all the symbols we need. ++ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then ++ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then ++ cat <<_LT_EOF > conftest.$ac_ext ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++_LT_EOF ++ # Now generate the symbol file. ++ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' ++ ++ cat <<_LT_EOF >> conftest.$ac_ext ++ ++/* The mapping between symbol names and symbols. */ ++const struct { ++ const char *name; ++ void *address; ++} ++lt__PROGRAM__LTX_preloaded_symbols[] = ++{ ++ { "@PROGRAM@", (void *) 0 }, ++_LT_EOF ++ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext ++ cat <<\_LT_EOF >> conftest.$ac_ext ++ {0, (void *) 0} ++}; ++ ++/* This works around a problem in FreeBSD linker */ ++#ifdef FREEBSD_WORKAROUND ++static const void *lt_preloaded_setup() { ++ return lt__PROGRAM__LTX_preloaded_symbols; ++} ++#endif ++ ++#ifdef __cplusplus ++} ++#endif ++_LT_EOF ++ # Now try linking the two files. ++ mv conftest.$ac_objext conftstm.$ac_objext ++ lt_save_LIBS="$LIBS" ++ lt_save_CFLAGS="$CFLAGS" ++ LIBS="conftstm.$ac_objext" ++ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" ++ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && test -s conftest${ac_exeext}; then ++ pipe_works=yes ++ fi ++ LIBS="$lt_save_LIBS" ++ CFLAGS="$lt_save_CFLAGS" ++ else ++ echo "cannot find nm_test_func in $nlist" >&5 ++ fi ++ else ++ echo "cannot find nm_test_var in $nlist" >&5 ++ fi ++ else ++ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 ++ fi ++ else ++ echo "$progname: failed program was:" >&5 ++ cat conftest.$ac_ext >&5 ++ fi ++ rm -rf conftest* conftst* ++ ++ # Do not use the global_symbol_pipe unless it works. ++ if test "$pipe_works" = yes; then ++ break ++ else ++ lt_cv_sys_global_symbol_pipe= ++ fi ++done ++ ++fi ++ ++if test -z "$lt_cv_sys_global_symbol_pipe"; then ++ lt_cv_sys_global_symbol_to_cdecl= ++fi ++if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then ++ { echo "$as_me:$LINENO: result: failed" >&5 ++echo "${ECHO_T}failed" >&6; } ++else ++ { echo "$as_me:$LINENO: result: ok" >&5 ++echo "${ECHO_T}ok" >&6; } ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++# Check whether --enable-libtool-lock was given. ++if test "${enable_libtool_lock+set}" = set; then ++ enableval=$enable_libtool_lock; ++fi ++ ++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes ++ ++# Some flags need to be propagated to the compiler or linker for good ++# libtool support. ++case $host in ++ia64-*-hpux*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ case `/usr/bin/file conftest.$ac_objext` in ++ *ELF-32*) ++ HPUX_IA64_MODE="32" ++ ;; ++ *ELF-64*) ++ HPUX_IA64_MODE="64" ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; ++*-*-irix6*) ++ # Find out which ABI we are using. ++ echo '#line __oline__ "configure"' > conftest.$ac_ext ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ case `/usr/bin/file conftest.$ac_objext` in ++ *32-bit*) ++ LD="${LD-ld} -melf32bsmip" ++ ;; ++ *N32*) ++ LD="${LD-ld} -melf32bmipn32" ++ ;; ++ *64-bit*) ++ LD="${LD-ld} -melf64bmip" ++ ;; ++ esac ++ else ++ case `/usr/bin/file conftest.$ac_objext` in ++ *32-bit*) ++ LD="${LD-ld} -32" ++ ;; ++ *N32*) ++ LD="${LD-ld} -n32" ++ ;; ++ *64-bit*) ++ LD="${LD-ld} -64" ++ ;; ++ esac ++ fi ++ fi ++ rm -rf conftest* ++ ;; ++ ++x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ ++s390*-*linux*|s390*-*tpf*|sparc*-*linux*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ case `/usr/bin/file conftest.o` in ++ *32-bit*) ++ case $host in ++ x86_64-*kfreebsd*-gnu) ++ LD="${LD-ld} -m elf_i386_fbsd" ++ ;; ++ x86_64-*linux*) ++ LD="${LD-ld} -m elf_i386" ++ ;; ++ ppc64-*linux*|powerpc64-*linux*) ++ LD="${LD-ld} -m elf32ppclinux" ++ ;; ++ s390x-*linux*) ++ LD="${LD-ld} -m elf_s390" ++ ;; ++ sparc64-*linux*) ++ LD="${LD-ld} -m elf32_sparc" ++ ;; ++ esac ++ ;; ++ *64-bit*) ++ case $host in ++ x86_64-*kfreebsd*-gnu) ++ LD="${LD-ld} -m elf_x86_64_fbsd" ++ ;; ++ x86_64-*linux*) ++ LD="${LD-ld} -m elf_x86_64" ++ ;; ++ ppc*-*linux*|powerpc*-*linux*) ++ LD="${LD-ld} -m elf64ppc" ++ ;; ++ s390*-*linux*|s390*-*tpf*) ++ LD="${LD-ld} -m elf64_s390" ++ ;; ++ sparc*-*linux*) ++ LD="${LD-ld} -m elf64_sparc" ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; ++ ++*-*-sco3.2v5*) ++ # On SCO OpenServer 5, we need -belf to get full-featured binaries. ++ SAVE_CFLAGS="$CFLAGS" ++ CFLAGS="$CFLAGS -belf" ++ { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 ++echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; } ++if test "${lt_cv_cc_needs_belf+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ lt_cv_cc_needs_belf=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ lt_cv_cc_needs_belf=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 ++echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; } ++ if test x"$lt_cv_cc_needs_belf" != x"yes"; then ++ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf ++ CFLAGS="$SAVE_CFLAGS" ++ fi ++ ;; ++sparc*-*solaris*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ case `/usr/bin/file conftest.o` in ++ *64-bit*) ++ case $lt_cv_prog_gnu_ld in ++ yes*) LD="${LD-ld} -m elf64_sparc" ;; ++ *) ++ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then ++ LD="${LD-ld} -64" ++ fi ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; ++esac ++ ++need_locks="$enable_libtool_lock" ++ ++ ++ case $host_os in ++ rhapsody* | darwin*) ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. ++set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_DSYMUTIL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$DSYMUTIL"; then ++ ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++DSYMUTIL=$ac_cv_prog_DSYMUTIL ++if test -n "$DSYMUTIL"; then ++ { echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 ++echo "${ECHO_T}$DSYMUTIL" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_DSYMUTIL"; then ++ ac_ct_DSYMUTIL=$DSYMUTIL ++ # Extract the first word of "dsymutil", so it can be a program name with args. ++set dummy dsymutil; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_DSYMUTIL"; then ++ ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL ++if test -n "$ac_ct_DSYMUTIL"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 ++echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_DSYMUTIL" = x; then ++ DSYMUTIL=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ DSYMUTIL=$ac_ct_DSYMUTIL ++ fi ++else ++ DSYMUTIL="$ac_cv_prog_DSYMUTIL" ++fi ++ ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. ++set dummy ${ac_tool_prefix}nmedit; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_NMEDIT+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$NMEDIT"; then ++ ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++NMEDIT=$ac_cv_prog_NMEDIT ++if test -n "$NMEDIT"; then ++ { echo "$as_me:$LINENO: result: $NMEDIT" >&5 ++echo "${ECHO_T}$NMEDIT" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_NMEDIT"; then ++ ac_ct_NMEDIT=$NMEDIT ++ # Extract the first word of "nmedit", so it can be a program name with args. ++set dummy nmedit; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_NMEDIT"; then ++ ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_NMEDIT="nmedit" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT ++if test -n "$ac_ct_NMEDIT"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 ++echo "${ECHO_T}$ac_ct_NMEDIT" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_NMEDIT" = x; then ++ NMEDIT=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ NMEDIT=$ac_ct_NMEDIT ++ fi ++else ++ NMEDIT="$ac_cv_prog_NMEDIT" ++fi ++ ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. ++set dummy ${ac_tool_prefix}lipo; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_LIPO+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$LIPO"; then ++ ac_cv_prog_LIPO="$LIPO" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_LIPO="${ac_tool_prefix}lipo" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++LIPO=$ac_cv_prog_LIPO ++if test -n "$LIPO"; then ++ { echo "$as_me:$LINENO: result: $LIPO" >&5 ++echo "${ECHO_T}$LIPO" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_LIPO"; then ++ ac_ct_LIPO=$LIPO ++ # Extract the first word of "lipo", so it can be a program name with args. ++set dummy lipo; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_LIPO"; then ++ ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_LIPO="lipo" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO ++if test -n "$ac_ct_LIPO"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5 ++echo "${ECHO_T}$ac_ct_LIPO" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_LIPO" = x; then ++ LIPO=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ LIPO=$ac_ct_LIPO ++ fi ++else ++ LIPO="$ac_cv_prog_LIPO" ++fi ++ ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. ++set dummy ${ac_tool_prefix}otool; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_OTOOL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$OTOOL"; then ++ ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_OTOOL="${ac_tool_prefix}otool" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++OTOOL=$ac_cv_prog_OTOOL ++if test -n "$OTOOL"; then ++ { echo "$as_me:$LINENO: result: $OTOOL" >&5 ++echo "${ECHO_T}$OTOOL" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_OTOOL"; then ++ ac_ct_OTOOL=$OTOOL ++ # Extract the first word of "otool", so it can be a program name with args. ++set dummy otool; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_OTOOL"; then ++ ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_OTOOL="otool" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL ++if test -n "$ac_ct_OTOOL"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5 ++echo "${ECHO_T}$ac_ct_OTOOL" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_OTOOL" = x; then ++ OTOOL=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ OTOOL=$ac_ct_OTOOL ++ fi ++else ++ OTOOL="$ac_cv_prog_OTOOL" ++fi ++ ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. ++set dummy ${ac_tool_prefix}otool64; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_OTOOL64+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$OTOOL64"; then ++ ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++OTOOL64=$ac_cv_prog_OTOOL64 ++if test -n "$OTOOL64"; then ++ { echo "$as_me:$LINENO: result: $OTOOL64" >&5 ++echo "${ECHO_T}$OTOOL64" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_OTOOL64"; then ++ ac_ct_OTOOL64=$OTOOL64 ++ # Extract the first word of "otool64", so it can be a program name with args. ++set dummy otool64; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_OTOOL64"; then ++ ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_OTOOL64="otool64" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 ++if test -n "$ac_ct_OTOOL64"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5 ++echo "${ECHO_T}$ac_ct_OTOOL64" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_OTOOL64" = x; then ++ OTOOL64=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ OTOOL64=$ac_ct_OTOOL64 ++ fi ++else ++ OTOOL64="$ac_cv_prog_OTOOL64" ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ { echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 ++echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6; } ++if test "${lt_cv_apple_cc_single_mod+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_apple_cc_single_mod=no ++ if test -z "${LT_MULTI_MODULE}"; then ++ # By default we will add the -single_module flag. You can override ++ # by either setting the environment variable LT_MULTI_MODULE ++ # non-empty at configure time, or by adding -multi_module to the ++ # link flags. ++ rm -rf libconftest.dylib* ++ echo "int foo(void){return 1;}" > conftest.c ++ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ ++-dynamiclib -Wl,-single_module conftest.c" >&5 ++ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ ++ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err ++ _lt_result=$? ++ if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then ++ lt_cv_apple_cc_single_mod=yes ++ else ++ cat conftest.err >&5 ++ fi ++ rm -rf libconftest.dylib* ++ rm -f conftest.* ++ fi ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 ++echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6; } ++ { echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 ++echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6; } ++if test "${lt_cv_ld_exported_symbols_list+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_ld_exported_symbols_list=no ++ save_LDFLAGS=$LDFLAGS ++ echo "_main" > conftest.sym ++ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ lt_cv_ld_exported_symbols_list=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ lt_cv_ld_exported_symbols_list=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ LDFLAGS="$save_LDFLAGS" ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 ++echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6; } ++ case $host_os in ++ rhapsody* | darwin1.[012]) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; ++ darwin1.*) ++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; ++ darwin*) # darwin 5.x on ++ # if running on 10.5 or later, the deployment target defaults ++ # to the OS version, if on x86, and 10.4, the deployment ++ # target defaults to 10.4. Don't you love it? ++ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in ++ 10.0,*86*-darwin8*|10.0,*-darwin[91]*) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; ++ 10.[012]*) ++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; ++ 10.*) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; ++ esac ++ ;; ++ esac ++ if test "$lt_cv_apple_cc_single_mod" = "yes"; then ++ _lt_dar_single_mod='$single_module' ++ fi ++ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then ++ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' ++ else ++ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ fi ++ if test "$DSYMUTIL" != ":"; then ++ _lt_dsymutil='~$DSYMUTIL $lib || :' ++ else ++ _lt_dsymutil= ++ fi ++ ;; ++ esac ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 ++echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; } ++# On Suns, sometimes $CPP names a directory. ++if test -n "$CPP" && test -d "$CPP"; then ++ CPP= ++fi ++if test -z "$CPP"; then ++ if test "${ac_cv_prog_CPP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ # Double quotes because CPP needs to be expanded ++ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" ++ do ++ ac_preproc_ok=false ++for ac_c_preproc_warn_flag in '' yes ++do ++ # Use a header file that comes with gcc, so configuring glibc ++ # with a fresh cross-compiler works. ++ # Prefer to if __STDC__ is defined, since ++ # exists even on freestanding compilers. ++ # On the NeXT, cc -E runs the code through the compiler's parser, ++ # not just through cpp. "Syntax error" is here to catch this case. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++@%:@ifdef __STDC__ ++@%:@ include ++@%:@else ++@%:@ include ++@%:@endif ++ Syntax error ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ : ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ # Broken: fails on valid input. ++continue ++fi ++ ++rm -f conftest.err conftest.$ac_ext ++ ++ # OK, works on sane cases. Now check whether nonexistent headers ++ # can be detected and how. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++@%:@include ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ # Broken: success on invalid input. ++continue ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ # Passes both tests. ++ac_preproc_ok=: ++break ++fi ++ ++rm -f conftest.err conftest.$ac_ext ++ ++done ++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. ++rm -f conftest.err conftest.$ac_ext ++if $ac_preproc_ok; then ++ break ++fi ++ ++ done ++ ac_cv_prog_CPP=$CPP ++ ++fi ++ CPP=$ac_cv_prog_CPP ++else ++ ac_cv_prog_CPP=$CPP ++fi ++{ echo "$as_me:$LINENO: result: $CPP" >&5 ++echo "${ECHO_T}$CPP" >&6; } ++ac_preproc_ok=false ++for ac_c_preproc_warn_flag in '' yes ++do ++ # Use a header file that comes with gcc, so configuring glibc ++ # with a fresh cross-compiler works. ++ # Prefer to if __STDC__ is defined, since ++ # exists even on freestanding compilers. ++ # On the NeXT, cc -E runs the code through the compiler's parser, ++ # not just through cpp. "Syntax error" is here to catch this case. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++@%:@ifdef __STDC__ ++@%:@ include ++@%:@else ++@%:@ include ++@%:@endif ++ Syntax error ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ : ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ # Broken: fails on valid input. ++continue ++fi ++ ++rm -f conftest.err conftest.$ac_ext ++ ++ # OK, works on sane cases. Now check whether nonexistent headers ++ # can be detected and how. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++@%:@include ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ # Broken: success on invalid input. ++continue ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ # Passes both tests. ++ac_preproc_ok=: ++break ++fi ++ ++rm -f conftest.err conftest.$ac_ext ++ ++done ++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. ++rm -f conftest.err conftest.$ac_ext ++if $ac_preproc_ok; then ++ : ++else ++ { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check ++See \`config.log' for more details." >&5 ++echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++ ++{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5 ++echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } ++if test "${ac_cv_header_stdc+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++#include ++#include ++#include ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_header_stdc=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_header_stdc=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++if test $ac_cv_header_stdc = yes; then ++ # SunOS 4.x string.h does not declare mem*, contrary to ANSI. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++ ++_ACEOF ++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | ++ $EGREP "memchr" >/dev/null 2>&1; then ++ : ++else ++ ac_cv_header_stdc=no ++fi ++rm -f conftest* ++ ++fi ++ ++if test $ac_cv_header_stdc = yes; then ++ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++ ++_ACEOF ++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | ++ $EGREP "free" >/dev/null 2>&1; then ++ : ++else ++ ac_cv_header_stdc=no ++fi ++rm -f conftest* ++ ++fi ++ ++if test $ac_cv_header_stdc = yes; then ++ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. ++ if test "$cross_compiling" = yes; then ++ : ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++#include ++#if ((' ' & 0x0FF) == 0x020) ++# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') ++# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) ++#else ++# define ISLOWER(c) \ ++ (('a' <= (c) && (c) <= 'i') \ ++ || ('j' <= (c) && (c) <= 'r') \ ++ || ('s' <= (c) && (c) <= 'z')) ++# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) ++#endif ++ ++#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) ++int ++main () ++{ ++ int i; ++ for (i = 0; i < 256; i++) ++ if (XOR (islower (i), ISLOWER (i)) ++ || toupper (i) != TOUPPER (i)) ++ return 2; ++ return 0; ++} ++_ACEOF ++rm -f conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ac_try='./conftest$ac_exeext' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ : ++else ++ echo "$as_me: program exited with status $ac_status" >&5 ++echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++( exit $ac_status ) ++ac_cv_header_stdc=no ++fi ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext ++fi ++ ++ ++fi ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 ++echo "${ECHO_T}$ac_cv_header_stdc" >&6; } ++if test $ac_cv_header_stdc = yes; then ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define STDC_HEADERS 1 ++_ACEOF ++ ++fi ++ ++# On IRIX 5.3, sys/types and inttypes.h are conflicting. ++ ++ ++ ++ ++ ++ ++ ++ ++ ++for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ ++ inttypes.h stdint.h unistd.h ++do ++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++$ac_includes_default ++ ++@%:@include <$ac_header> ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ eval "$as_ac_Header=yes" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ eval "$as_ac_Header=no" ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++if test `eval echo '${'$as_ac_Header'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++@%:@define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++_ACEOF ++ ++fi ++ ++done ++ ++ ++ ++for ac_header in dlfcn.h ++do ++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++$ac_includes_default ++ ++@%:@include <$ac_header> ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ eval "$as_ac_Header=yes" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ eval "$as_ac_Header=no" ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++if test `eval echo '${'$as_ac_Header'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++@%:@define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++_ACEOF ++ ++fi ++ ++done ++ ++ ++ ++# Set options ++ ++ ++ ++ enable_dlopen=no ++ ++ ++ enable_win32_dll=no ++ ++ ++ # Check whether --enable-shared was given. ++if test "${enable_shared+set}" = set; then ++ enableval=$enable_shared; p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_shared=yes ;; ++ no) enable_shared=no ;; ++ *) ++ enable_shared=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_shared=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac ++else ++ enable_shared=yes ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ # Check whether --enable-static was given. ++if test "${enable_static+set}" = set; then ++ enableval=$enable_static; p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_static=yes ;; ++ no) enable_static=no ;; ++ *) ++ enable_static=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_static=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac ++else ++ enable_static=yes ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++# Check whether --with-pic was given. ++if test "${with_pic+set}" = set; then ++ withval=$with_pic; pic_mode="$withval" ++else ++ pic_mode=default ++fi ++ ++ ++test -z "$pic_mode" && pic_mode=default ++ ++ ++ ++ ++ ++ ++ ++ # Check whether --enable-fast-install was given. ++if test "${enable_fast_install+set}" = set; then ++ enableval=$enable_fast_install; p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_fast_install=yes ;; ++ no) enable_fast_install=no ;; ++ *) ++ enable_fast_install=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_fast_install=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac ++else ++ enable_fast_install=yes ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++# This can be used to rebuild libtool when needed ++LIBTOOL_DEPS="$ltmain" ++ ++# Always use our own libtool. ++LIBTOOL='$(SHELL) $(top_builddir)/libtool' ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++test -z "$LN_S" && LN_S="ln -s" ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++fi ++ ++{ echo "$as_me:$LINENO: checking for objdir" >&5 ++echo $ECHO_N "checking for objdir... $ECHO_C" >&6; } ++if test "${lt_cv_objdir+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ rm -f .libs 2>/dev/null ++mkdir .libs 2>/dev/null ++if test -d .libs; then ++ lt_cv_objdir=.libs ++else ++ # MS-DOS does not allow filenames that begin with a dot. ++ lt_cv_objdir=_libs ++fi ++rmdir .libs 2>/dev/null ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 ++echo "${ECHO_T}$lt_cv_objdir" >&6; } ++objdir=$lt_cv_objdir ++ ++ ++ ++ ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define LT_OBJDIR "$lt_cv_objdir/" ++_ACEOF ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++case $host_os in ++aix3*) ++ # AIX sometimes has problems with the GCC collect2 program. For some ++ # reason, if we set the COLLECT_NAMES environment variable, the problems ++ # vanish in a puff of smoke. ++ if test "X${COLLECT_NAMES+set}" != Xset; then ++ COLLECT_NAMES= ++ export COLLECT_NAMES ++ fi ++ ;; ++esac ++ ++# Sed substitution that helps us do robust quoting. It backslashifies ++# metacharacters that are still active within double-quoted strings. ++sed_quote_subst='s/\(["`$\\]\)/\\\1/g' ++ ++# Same as above, but do not quote variable references. ++double_quote_subst='s/\(["`\\]\)/\\\1/g' ++ ++# Sed substitution to delay expansion of an escaped shell variable in a ++# double_quote_subst'ed string. ++delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' ++ ++# Sed substitution to delay expansion of an escaped single quote. ++delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' ++ ++# Sed substitution to avoid accidental globbing in evaled expressions ++no_glob_subst='s/\*/\\\*/g' ++ ++# Global variables: ++ofile=libtool ++can_build_shared=yes ++ ++# All known linkers require a `.a' archive for static linking (except MSVC, ++# which needs '.lib'). ++libext=a ++ ++with_gnu_ld="$lt_cv_prog_gnu_ld" ++ ++old_CC="$CC" ++old_CFLAGS="$CFLAGS" ++ ++# Set sane defaults for various variables ++test -z "$CC" && CC=cc ++test -z "$LTCC" && LTCC=$CC ++test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS ++test -z "$LD" && LD=ld ++test -z "$ac_objext" && ac_objext=o ++ ++for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++ ++ ++# Only perform the check for file, if the check method requires it ++test -z "$MAGIC_CMD" && MAGIC_CMD=file ++case $deplibs_check_method in ++file_magic*) ++ if test "$file_magic_cmd" = '$MAGIC_CMD'; then ++ { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 ++echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; } ++if test "${lt_cv_path_MAGIC_CMD+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $MAGIC_CMD in ++[\\/*] | ?:[\\/]*) ++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ++ ;; ++*) ++ lt_save_MAGIC_CMD="$MAGIC_CMD" ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" ++ for ac_dir in $ac_dummy; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/${ac_tool_prefix}file; then ++ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" ++ if test -n "$file_magic_test_file"; then ++ case $deplibs_check_method in ++ "file_magic "*) ++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` ++ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | ++ $EGREP "$file_magic_regex" > /dev/null; then ++ : ++ else ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: the command libtool uses to detect shared libraries, ++*** $file_magic_cmd, produces output that libtool cannot recognize. ++*** The result is that libtool may fail to recognize shared libraries ++*** as such. This will affect the creation of libtool libraries that ++*** depend on shared libraries, but programs linked with such libtool ++*** libraries will work regardless of this problem. Nevertheless, you ++*** may want to report the problem to your system manager and/or to ++*** bug-libtool@gnu.org ++ ++_LT_EOF ++ fi ;; ++ esac ++ fi ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" ++ MAGIC_CMD="$lt_save_MAGIC_CMD" ++ ;; ++esac ++fi ++ ++MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++if test -n "$MAGIC_CMD"; then ++ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 ++echo "${ECHO_T}$MAGIC_CMD" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ ++ ++ ++if test -z "$lt_cv_path_MAGIC_CMD"; then ++ if test -n "$ac_tool_prefix"; then ++ { echo "$as_me:$LINENO: checking for file" >&5 ++echo $ECHO_N "checking for file... $ECHO_C" >&6; } ++if test "${lt_cv_path_MAGIC_CMD+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $MAGIC_CMD in ++[\\/*] | ?:[\\/]*) ++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ++ ;; ++*) ++ lt_save_MAGIC_CMD="$MAGIC_CMD" ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" ++ for ac_dir in $ac_dummy; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/file; then ++ lt_cv_path_MAGIC_CMD="$ac_dir/file" ++ if test -n "$file_magic_test_file"; then ++ case $deplibs_check_method in ++ "file_magic "*) ++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` ++ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | ++ $EGREP "$file_magic_regex" > /dev/null; then ++ : ++ else ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: the command libtool uses to detect shared libraries, ++*** $file_magic_cmd, produces output that libtool cannot recognize. ++*** The result is that libtool may fail to recognize shared libraries ++*** as such. This will affect the creation of libtool libraries that ++*** depend on shared libraries, but programs linked with such libtool ++*** libraries will work regardless of this problem. Nevertheless, you ++*** may want to report the problem to your system manager and/or to ++*** bug-libtool@gnu.org ++ ++_LT_EOF ++ fi ;; ++ esac ++ fi ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" ++ MAGIC_CMD="$lt_save_MAGIC_CMD" ++ ;; ++esac ++fi ++ ++MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++if test -n "$MAGIC_CMD"; then ++ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 ++echo "${ECHO_T}$MAGIC_CMD" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ else ++ MAGIC_CMD=: ++ fi ++fi ++ ++ fi ++ ;; ++esac ++ ++# Use C for the default configuration in the libtool script ++ ++lt_save_CC="$CC" ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++ ++# Source file extension for C test sources. ++ac_ext=c ++ ++# Object file extension for compiled C test sources. ++objext=o ++objext=$objext ++ ++# Code to be used in simple compile tests ++lt_simple_compile_test_code="int some_variable = 0;" ++ ++# Code to be used in simple link tests ++lt_simple_link_test_code='int main(){return(0);}' ++ ++ ++ ++ ++ ++ ++ ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} ++ ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++ ++# Allow CC to be a program name with arguments. ++compiler=$CC ++ ++# Save the default compiler, since it gets overwritten when the other ++# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. ++compiler_DEFAULT=$CC ++ ++# save warnings/boilerplate of simple test code ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_compile_test_code" >conftest.$ac_ext ++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_compiler_boilerplate=`cat conftest.err` ++$RM conftest* ++ ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_link_test_code" >conftest.$ac_ext ++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_linker_boilerplate=`cat conftest.err` ++$RM -r conftest* ++ ++ ++## CAVEAT EMPTOR: ++## There is no encapsulation within the following macros, do not change ++## the running order or otherwise move them around unless you know exactly ++## what you are doing... ++if test -n "$compiler"; then ++ ++lt_prog_compiler_no_builtin_flag= ++ ++if test "$GCC" = yes; then ++ lt_prog_compiler_no_builtin_flag=' -fno-builtin' ++ ++ { echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 ++echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_rtti_exceptions=no ++ ac_outfile=conftest.$ac_objext ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="-fno-rtti -fno-exceptions" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&5 ++ echo "$as_me:__oline__: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_rtti_exceptions=yes ++ fi ++ fi ++ $RM conftest* ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; } ++ ++if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then ++ lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" ++else ++ : ++fi ++ ++fi ++ ++ ++ ++ ++ ++ ++ lt_prog_compiler_wl= ++lt_prog_compiler_pic= ++lt_prog_compiler_static= ++ ++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } ++ ++ if test "$GCC" = yes; then ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_static='-static' ++ ++ case $host_os in ++ aix*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ lt_prog_compiler_static='-Bstatic' ++ fi ++ ;; ++ ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ lt_prog_compiler_pic='-fPIC' ++ ;; ++ m68k) ++ # FIXME: we need at least 68020 code to build shared libraries, but ++ # adding the `-m68020' flag to GCC prevents building anything better, ++ # like `-m68040'. ++ lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' ++ ;; ++ esac ++ ;; ++ ++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ # PIC is the default for these OSes. ++ ;; ++ ++ mingw* | cygwin* | pw32* | os2*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ # Although the cygwin gcc ignores -fPIC, still need this for old-style ++ # (--disable-auto-import) libraries ++ lt_prog_compiler_pic='-DDLL_EXPORT' ++ ;; ++ ++ darwin* | rhapsody*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ lt_prog_compiler_pic='-fno-common' ++ ;; ++ ++ hpux*) ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ lt_prog_compiler_pic='-fPIC' ++ ;; ++ esac ++ ;; ++ ++ interix[3-9]*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; ++ ++ msdosdjgpp*) ++ # Just because we use GCC doesn't mean we suddenly get shared libraries ++ # on systems that don't support them. ++ lt_prog_compiler_can_build_shared=no ++ enable_shared=no ++ ;; ++ ++ *nto* | *qnx*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ lt_prog_compiler_pic='-fPIC -shared' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ lt_prog_compiler_pic=-Kconform_pic ++ fi ++ ;; ++ ++ *) ++ lt_prog_compiler_pic='-fPIC' ++ ;; ++ esac ++ else ++ # PORTME Check for flag to pass linker flags through the system compiler. ++ case $host_os in ++ aix*) ++ lt_prog_compiler_wl='-Wl,' ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ lt_prog_compiler_static='-Bstatic' ++ else ++ lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' ++ fi ++ ;; ++ ++ mingw* | cygwin* | pw32* | os2*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ lt_prog_compiler_pic='-DDLL_EXPORT' ++ ;; ++ ++ hpux9* | hpux10* | hpux11*) ++ lt_prog_compiler_wl='-Wl,' ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ lt_prog_compiler_pic='+Z' ++ ;; ++ esac ++ # Is there a better lt_prog_compiler_static that works with the bundled CC? ++ lt_prog_compiler_static='${wl}-a ${wl}archive' ++ ;; ++ ++ irix5* | irix6* | nonstopux*) ++ lt_prog_compiler_wl='-Wl,' ++ # PIC (with -KPIC) is the default. ++ lt_prog_compiler_static='-non_shared' ++ ;; ++ ++ linux* | k*bsd*-gnu) ++ case $cc_basename in ++ icc* | ecc* | ifort*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-static' ++ ;; ++ pgcc* | pgf77* | pgf90* | pgf95*) ++ # Portland Group compilers (*not* the Pentium gcc compiler, ++ # which looks to be a dead project) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-fpic' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ccc*) ++ lt_prog_compiler_wl='-Wl,' ++ # All Alpha code is PIC. ++ lt_prog_compiler_static='-non_shared' ++ ;; ++ xl*) ++ # IBM XL C 8.0/Fortran 10.1 on PPC ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-qpic' ++ lt_prog_compiler_static='-qstaticlink' ++ ;; ++ *) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C 5.9 ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ lt_prog_compiler_wl='-Wl,' ++ ;; ++ *Sun\ F*) ++ # Sun Fortran 8.3 passes all unrecognized flags to the linker ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ lt_prog_compiler_wl='' ++ ;; ++ esac ++ ;; ++ esac ++ ;; ++ ++ newsos6) ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ++ *nto* | *qnx*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ lt_prog_compiler_pic='-fPIC -shared' ++ ;; ++ ++ osf3* | osf4* | osf5*) ++ lt_prog_compiler_wl='-Wl,' ++ # All OSF/1 code is PIC. ++ lt_prog_compiler_static='-non_shared' ++ ;; ++ ++ rdos*) ++ lt_prog_compiler_static='-non_shared' ++ ;; ++ ++ solaris*) ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ case $cc_basename in ++ f77* | f90* | f95*) ++ lt_prog_compiler_wl='-Qoption ld ';; ++ *) ++ lt_prog_compiler_wl='-Wl,';; ++ esac ++ ;; ++ ++ sunos4*) ++ lt_prog_compiler_wl='-Qoption ld ' ++ lt_prog_compiler_pic='-PIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ++ sysv4 | sysv4.2uw2* | sysv4.3*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec ;then ++ lt_prog_compiler_pic='-Kconform_pic' ++ lt_prog_compiler_static='-Bstatic' ++ fi ++ ;; ++ ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ++ unicos*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_can_build_shared=no ++ ;; ++ ++ uts4*) ++ lt_prog_compiler_pic='-pic' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ++ *) ++ lt_prog_compiler_can_build_shared=no ++ ;; ++ esac ++ fi ++ ++case $host_os in ++ # For platforms which do not support PIC, -DPIC is meaningless: ++ *djgpp*) ++ lt_prog_compiler_pic= ++ ;; ++ *) ++ lt_prog_compiler_pic="$lt_prog_compiler_pic@&t@ -DPIC" ++ ;; ++esac ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic" >&6; } ++ ++ ++ ++ ++ ++ ++# ++# Check to make sure the PIC flag actually works. ++# ++if test -n "$lt_prog_compiler_pic"; then ++ { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_pic_works+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_pic_works=no ++ ac_outfile=conftest.$ac_objext ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="$lt_prog_compiler_pic@&t@ -DPIC" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&5 ++ echo "$as_me:__oline__: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_pic_works=yes ++ fi ++ fi ++ $RM conftest* ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6; } ++ ++if test x"$lt_cv_prog_compiler_pic_works" = xyes; then ++ case $lt_prog_compiler_pic in ++ "" | " "*) ;; ++ *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; ++ esac ++else ++ lt_prog_compiler_pic= ++ lt_prog_compiler_can_build_shared=no ++fi ++ ++fi ++ ++ ++ ++ ++ ++ ++# ++# Check to make sure the static flag actually works. ++# ++wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" ++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_static_works+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_static_works=no ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS $lt_tmp_static_flag" ++ echo "$lt_simple_link_test_code" > conftest.$ac_ext ++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then ++ # The linker can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ if test -s conftest.err; then ++ # Append any errors to the config.log. ++ cat conftest.err 1>&5 ++ $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_static_works=yes ++ fi ++ else ++ lt_cv_prog_compiler_static_works=yes ++ fi ++ fi ++ $RM -r conftest* ++ LDFLAGS="$save_LDFLAGS" ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6; } ++ ++if test x"$lt_cv_prog_compiler_static_works" = xyes; then ++ : ++else ++ lt_prog_compiler_static= ++fi ++ ++ ++ ++ ++ ++ ++ ++ { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_c_o+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_c_o=no ++ $RM -r conftest 2>/dev/null ++ mkdir conftest ++ cd conftest ++ mkdir out ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ lt_compiler_flag="-o out/conftest2.$ac_objext" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>out/conftest.err) ++ ac_status=$? ++ cat out/conftest.err >&5 ++ echo "$as_me:__oline__: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s out/conftest2.$ac_objext ++ then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_c_o=yes ++ fi ++ fi ++ chmod u+w . 2>&5 ++ $RM conftest* ++ # SGI C++ compiler will create directory out/ii_files/ for ++ # template instantiation ++ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files ++ $RM out/* && rmdir out ++ cd .. ++ $RM -r conftest ++ $RM conftest* ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } ++ ++ ++ ++ ++ ++ ++ { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_c_o+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_c_o=no ++ $RM -r conftest 2>/dev/null ++ mkdir conftest ++ cd conftest ++ mkdir out ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ lt_compiler_flag="-o out/conftest2.$ac_objext" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>out/conftest.err) ++ ac_status=$? ++ cat out/conftest.err >&5 ++ echo "$as_me:__oline__: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s out/conftest2.$ac_objext ++ then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_c_o=yes ++ fi ++ fi ++ chmod u+w . 2>&5 ++ $RM conftest* ++ # SGI C++ compiler will create directory out/ii_files/ for ++ # template instantiation ++ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files ++ $RM out/* && rmdir out ++ cd .. ++ $RM -r conftest ++ $RM conftest* ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } ++ ++ ++ ++ ++hard_links="nottested" ++if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then ++ # do not overwrite the value of need_locks provided by the user ++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } ++ hard_links=yes ++ $RM conftest* ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ touch conftest.a ++ ln conftest.a conftest.b 2>&5 || hard_links=no ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ { echo "$as_me:$LINENO: result: $hard_links" >&5 ++echo "${ECHO_T}$hard_links" >&6; } ++ if test "$hard_links" = no; then ++ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 ++echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} ++ need_locks=warn ++ fi ++else ++ need_locks=no ++fi ++ ++ ++ ++ ++ ++ ++ { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } ++ ++ runpath_var= ++ allow_undefined_flag= ++ always_export_symbols=no ++ archive_cmds= ++ archive_expsym_cmds= ++ compiler_needs_object=no ++ enable_shared_with_static_runtimes=no ++ export_dynamic_flag_spec= ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ hardcode_automatic=no ++ hardcode_direct=no ++ hardcode_direct_absolute=no ++ hardcode_libdir_flag_spec= ++ hardcode_libdir_flag_spec_ld= ++ hardcode_libdir_separator= ++ hardcode_minus_L=no ++ hardcode_shlibpath_var=unsupported ++ inherit_rpath=no ++ link_all_deplibs=unknown ++ module_cmds= ++ module_expsym_cmds= ++ old_archive_from_new_cmds= ++ old_archive_from_expsyms_cmds= ++ thread_safe_flag_spec= ++ whole_archive_flag_spec= ++ # include_expsyms should be a list of space-separated symbols to be *always* ++ # included in the symbol list ++ include_expsyms= ++ # exclude_expsyms can be an extended regexp of symbols to exclude ++ # it will be wrapped by ` (' and `)$', so one must not match beginning or ++ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', ++ # as well as any symbol that contains `d'. ++ exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' ++ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out ++ # platforms (ab)use it in PIC code, but their linkers get confused if ++ # the symbol is explicitly referenced. Since portable code cannot ++ # rely on this symbol name, it's probably fine to never include it in ++ # preloaded symbol tables. ++ # Exclude shared library initialization/finalization symbols. ++ extract_expsyms_cmds= ++ ++ case $host_os in ++ cygwin* | mingw* | pw32*) ++ # FIXME: the MSVC++ port hasn't been tested in a loooong time ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ if test "$GCC" != yes; then ++ with_gnu_ld=no ++ fi ++ ;; ++ interix*) ++ # we just hope/assume this is gcc and not c89 (= MSVC++) ++ with_gnu_ld=yes ++ ;; ++ openbsd*) ++ with_gnu_ld=no ++ ;; ++ esac ++ ++ ld_shlibs=yes ++ if test "$with_gnu_ld" = yes; then ++ # If archive_cmds runs LD, not CC, wlarc should be empty ++ wlarc='${wl}' ++ ++ # Set some defaults for GNU ld with shared library support. These ++ # are reset later if shared libraries are not supported. Putting them ++ # here allows them to be overridden if necessary. ++ runpath_var=LD_RUN_PATH ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ export_dynamic_flag_spec='${wl}--export-dynamic' ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then ++ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ whole_archive_flag_spec= ++ fi ++ supports_anon_versioning=no ++ case `$LD -v 2>&1` in ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 ++ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... ++ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... ++ *\ 2.11.*) ;; # other 2.11 versions ++ *) supports_anon_versioning=yes ;; ++ esac ++ ++ # See if GNU ld supports shared libraries. ++ case $host_os in ++ aix[3-9]*) ++ # On AIX/PPC, the GNU linker is very broken ++ if test "$host_cpu" != ia64; then ++ ld_shlibs=no ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: the GNU linker, at least up to release 2.9.1, is reported ++*** to be unable to reliably create shared libraries on AIX. ++*** Therefore, libtool is disabling shared libraries support. If you ++*** really care for shared libraries, you may want to modify your PATH ++*** so that a non-GNU linker is found, and then restart. ++ ++_LT_EOF ++ fi ++ ;; ++ ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='' ++ ;; ++ m68k) ++ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_minus_L=yes ++ ;; ++ esac ++ ;; ++ ++ beos*) ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ allow_undefined_flag=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ ++ cygwin* | mingw* | pw32*) ++ # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, ++ # as there is no search path for DLLs. ++ hardcode_libdir_flag_spec='-L$libdir' ++ allow_undefined_flag=unsupported ++ always_export_symbols=no ++ enable_shared_with_static_runtimes=yes ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' ++ ++ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ # If the export-symbols file already is a .def file (1st line ++ # is EXPORTS), use it as is; otherwise, prepend... ++ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ cp $export_symbols $output_objdir/$soname.def; ++ else ++ echo EXPORTS > $output_objdir/$soname.def; ++ cat $export_symbols >> $output_objdir/$soname.def; ++ fi~ ++ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ ++ interix[3-9]*) ++ hardcode_direct=no ++ hardcode_shlibpath_var=no ++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; ++ ++ gnu* | linux* | tpf* | k*bsd*-gnu) ++ tmp_diet=no ++ if test "$host_os" = linux-dietlibc; then ++ case $cc_basename in ++ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) ++ esac ++ fi ++ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ ++ && test "$tmp_diet" = no ++ then ++ tmp_addflag= ++ tmp_sharedflag='-shared' ++ case $cc_basename,$host_cpu in ++ pgcc*) # Portland Group C compiler ++ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag' ++ ;; ++ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers ++ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag -Mnomain' ;; ++ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 ++ tmp_addflag=' -i_dynamic' ;; ++ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 ++ tmp_addflag=' -i_dynamic -nofor_main' ;; ++ ifc* | ifort*) # Intel Fortran compiler ++ tmp_addflag=' -nofor_main' ;; ++ xl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) ++ tmp_sharedflag='-qmkshrobj' ++ tmp_addflag= ;; ++ esac ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) # Sun C 5.9 ++ whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ compiler_needs_object=yes ++ tmp_sharedflag='-G' ;; ++ *Sun\ F*) # Sun Fortran 8.3 ++ tmp_sharedflag='-G' ;; ++ esac ++ archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ ++ if test "x$supports_anon_versioning" = xyes; then ++ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' ++ fi ++ ++ case $cc_basename in ++ xlf*) ++ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself ++ whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' ++ hardcode_libdir_flag_spec= ++ hardcode_libdir_flag_spec_ld='-rpath $libdir' ++ archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' ++ if test "x$supports_anon_versioning" = xyes; then ++ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' ++ fi ++ ;; ++ esac ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' ++ wlarc= ++ else ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ fi ++ ;; ++ ++ solaris*) ++ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then ++ ld_shlibs=no ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: The releases 2.8.* of the GNU linker cannot reliably ++*** create shared libraries on Solaris systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.9.1 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. ++ ++_LT_EOF ++ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ ++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) ++ case `$LD -v 2>&1` in ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ++ ld_shlibs=no ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not ++*** reliably create shared libraries on SCO systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.16.91.0.3 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. ++ ++_LT_EOF ++ ;; ++ *) ++ # For security reasons, it is highly recommended that you always ++ # use absolute paths for naming shared libraries, and exclude the ++ # DT_RUNPATH tag from executables and libraries. But doing so ++ # requires that you compile everything twice, which is a pain. ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ esac ++ ;; ++ ++ sunos4*) ++ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ wlarc= ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ ;; ++ ++ *) ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ esac ++ ++ if test "$ld_shlibs" = no; then ++ runpath_var= ++ hardcode_libdir_flag_spec= ++ export_dynamic_flag_spec= ++ whole_archive_flag_spec= ++ fi ++ else ++ # PORTME fill in a description of your system's linker (not GNU ld) ++ case $host_os in ++ aix3*) ++ allow_undefined_flag=unsupported ++ always_export_symbols=yes ++ archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' ++ # Note: this linker hardcodes the directories in LIBPATH if there ++ # are no directories specified by -L. ++ hardcode_minus_L=yes ++ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then ++ # Neither direct hardcoding nor static linking is supported with a ++ # broken collect2. ++ hardcode_direct=unsupported ++ fi ++ ;; ++ ++ aix[4-9]*) ++ if test "$host_cpu" = ia64; then ++ # On IA64, the linker does run time linking by default, so we don't ++ # have to do anything special. ++ aix_use_runtimelinking=no ++ exp_sym_flag='-Bexport' ++ no_entry_flag="" ++ else ++ # If we're using GNU nm, then we don't want the "-C" option. ++ # -C means demangle to AIX nm, but means don't demangle with GNU nm ++ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then ++ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ else ++ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ fi ++ aix_use_runtimelinking=no ++ ++ # Test if we are trying to use run time linking or normal ++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we ++ # need to do runtime linking. ++ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) ++ for ld_flag in $LDFLAGS; do ++ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then ++ aix_use_runtimelinking=yes ++ break ++ fi ++ done ++ ;; ++ esac ++ ++ exp_sym_flag='-bexport' ++ no_entry_flag='-bnoentry' ++ fi ++ ++ # When large executables or shared objects are built, AIX ld can ++ # have problems creating the table of contents. If linking a library ++ # or program results in "error TOC overflow" add -mminimal-toc to ++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not ++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. ++ ++ archive_cmds='' ++ hardcode_direct=yes ++ hardcode_direct_absolute=yes ++ hardcode_libdir_separator=':' ++ link_all_deplibs=yes ++ file_list_spec='${wl}-f,' ++ ++ if test "$GCC" = yes; then ++ case $host_os in aix4.[012]|aix4.[012].*) ++ # We only want to do this on AIX 4.2 and lower, the check ++ # below for broken collect2 doesn't work under 4.3+ ++ collect2name=`${CC} -print-prog-name=collect2` ++ if test -f "$collect2name" && ++ strings "$collect2name" | $GREP resolve_lib_name >/dev/null ++ then ++ # We have reworked collect2 ++ : ++ else ++ # We have old collect2 ++ hardcode_direct=unsupported ++ # It fails to find uninstalled libraries when the uninstalled ++ # path is not listed in the libpath. Setting hardcode_minus_L ++ # to unsupported forces relinking ++ hardcode_minus_L=yes ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_libdir_separator= ++ fi ++ ;; ++ esac ++ shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi ++ link_all_deplibs=no ++ else ++ # not using gcc ++ if test "$host_cpu" = ia64; then ++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release ++ # chokes on -Wl,-G. The following line is correct: ++ shared_flag='-G' ++ else ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag='${wl}-G' ++ else ++ shared_flag='${wl}-bM:SRE' ++ fi ++ fi ++ fi ++ ++ # It seems that -bexpall does not export symbols beginning with ++ # underscore (_), so it is better to generate a list of symbols to export. ++ always_export_symbols=yes ++ if test "$aix_use_runtimelinking" = yes; then ++ # Warning - without using the other runtime loading flags (-brtl), ++ # -berok will link without error, but may produce a broken library. ++ allow_undefined_flag='-berok' ++ # Determine the default libpath from the value encoded in an ++ # empty executable. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ++lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *\(.*\)$/\1/ ++ p ++ } ++ }' ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then ++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++fi ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ ++ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" ++ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ else ++ if test "$host_cpu" = ia64; then ++ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' ++ allow_undefined_flag="-z nodefs" ++ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" ++ else ++ # Determine the default libpath from the value encoded in an ++ # empty executable. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ++lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *\(.*\)$/\1/ ++ p ++ } ++ }' ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then ++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++fi ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ ++ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" ++ # Warning - without using the other run time loading flags, ++ # -berok will link without error, but may produce a broken library. ++ no_undefined_flag=' ${wl}-bernotok' ++ allow_undefined_flag=' ${wl}-berok' ++ # Exported symbols can be pulled into shared objects from archives ++ whole_archive_flag_spec='$convenience' ++ archive_cmds_need_lc=yes ++ # This is similar to how AIX traditionally builds its shared libraries. ++ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ fi ++ fi ++ ;; ++ ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='' ++ ;; ++ m68k) ++ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_minus_L=yes ++ ;; ++ esac ++ ;; ++ ++ bsdi[45]*) ++ export_dynamic_flag_spec=-rdynamic ++ ;; ++ ++ cygwin* | mingw* | pw32*) ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ # hardcode_libdir_flag_spec is actually meaningless, as there is ++ # no search path for DLLs. ++ hardcode_libdir_flag_spec=' ' ++ allow_undefined_flag=unsupported ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' ++ # The linker will automatically build a .lib file if we build a DLL. ++ old_archive_from_new_cmds='true' ++ # FIXME: Should let the user specify the lib program. ++ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' ++ fix_srcfile_path='`cygpath -w "$srcfile"`' ++ enable_shared_with_static_runtimes=yes ++ ;; ++ ++ darwin* | rhapsody*) ++ ++ ++ archive_cmds_need_lc=no ++ hardcode_direct=no ++ hardcode_automatic=yes ++ hardcode_shlibpath_var=unsupported ++ whole_archive_flag_spec='' ++ link_all_deplibs=yes ++ allow_undefined_flag="$_lt_dar_allow_undefined" ++ if test "$GCC" = "yes"; then ++ output_verbose_link_cmd=echo ++ archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" ++ module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" ++ archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" ++ module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" ++ ++ else ++ ld_shlibs=no ++ fi ++ ++ ;; ++ ++ dgux*) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_shlibpath_var=no ++ ;; ++ ++ freebsd1*) ++ ld_shlibs=no ++ ;; ++ ++ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor ++ # support. Future versions do this automatically, but an explicit c++rt0.o ++ # does not break anything, and helps significantly (at the cost of a little ++ # extra space). ++ freebsd2.2*) ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ ;; ++ ++ # Unfortunately, older versions of FreeBSD 2 do not have this feature. ++ freebsd2*) ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=yes ++ hardcode_minus_L=yes ++ hardcode_shlibpath_var=no ++ ;; ++ ++ # FreeBSD 3 and greater uses gcc -shared to do shared libraries. ++ freebsd* | dragonfly*) ++ archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ ;; ++ ++ hpux9*) ++ if test "$GCC" = yes; then ++ archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ else ++ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ fi ++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator=: ++ hardcode_direct=yes ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L=yes ++ export_dynamic_flag_spec='${wl}-E' ++ ;; ++ ++ hpux10*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ if test "$with_gnu_ld" = no; then ++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ++ hardcode_libdir_flag_spec_ld='+b $libdir' ++ hardcode_libdir_separator=: ++ hardcode_direct=yes ++ hardcode_direct_absolute=yes ++ export_dynamic_flag_spec='${wl}-E' ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L=yes ++ fi ++ ;; ++ ++ hpux11*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ else ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ fi ++ if test "$with_gnu_ld" = no; then ++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator=: ++ ++ case $host_cpu in ++ hppa*64*|ia64*) ++ hardcode_direct=no ++ hardcode_shlibpath_var=no ++ ;; ++ *) ++ hardcode_direct=yes ++ hardcode_direct_absolute=yes ++ export_dynamic_flag_spec='${wl}-E' ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L=yes ++ ;; ++ esac ++ fi ++ ;; ++ ++ irix5* | irix6* | nonstopux*) ++ if test "$GCC" = yes; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ # Try to use the -exported_symbol ld option, if it does not ++ # work, assume that -exports_file does not work either and ++ # implicitly export all symbols. ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" ++ cat >conftest.$ac_ext <<_ACEOF ++int foo(void) {} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' ++ ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ LDFLAGS="$save_LDFLAGS" ++ else ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' ++ fi ++ archive_cmds_need_lc='no' ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator=: ++ inherit_rpath=yes ++ link_all_deplibs=yes ++ ;; ++ ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out ++ else ++ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF ++ fi ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ ;; ++ ++ newsos6) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=yes ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator=: ++ hardcode_shlibpath_var=no ++ ;; ++ ++ *nto* | *qnx*) ++ ;; ++ ++ openbsd*) ++ if test -f /usr/libexec/ld.so; then ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ hardcode_direct_absolute=yes ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' ++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec='${wl}-E' ++ else ++ case $host_os in ++ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec='-R$libdir' ++ ;; ++ *) ++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ ;; ++ esac ++ fi ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ ++ os2*) ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_minus_L=yes ++ allow_undefined_flag=unsupported ++ archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' ++ old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ++ ;; ++ ++ osf3*) ++ if test "$GCC" = yes; then ++ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ allow_undefined_flag=' -expect_unresolved \*' ++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ fi ++ archive_cmds_need_lc='no' ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator=: ++ ;; ++ ++ osf4* | osf5*) # as osf3* with the addition of -msym flag ++ if test "$GCC" = yes; then ++ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ else ++ allow_undefined_flag=' -expect_unresolved \*' ++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ ++ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' ++ ++ # Both c and cxx compiler support -rpath directly ++ hardcode_libdir_flag_spec='-rpath $libdir' ++ fi ++ archive_cmds_need_lc='no' ++ hardcode_libdir_separator=: ++ ;; ++ ++ solaris*) ++ no_undefined_flag=' -z defs' ++ if test "$GCC" = yes; then ++ wlarc='${wl}' ++ archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ++ else ++ case `$CC -V 2>&1` in ++ *"Compilers 5.0"*) ++ wlarc='' ++ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ++ ;; ++ *) ++ wlarc='${wl}' ++ archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ++ ;; ++ esac ++ fi ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_shlibpath_var=no ++ case $host_os in ++ solaris2.[0-5] | solaris2.[0-5].*) ;; ++ *) ++ # The compiler driver will combine and reorder linker options, ++ # but understands `-z linker_flag'. GCC discards it without `$wl', ++ # but is careful enough not to reorder. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ if test "$GCC" = yes; then ++ whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ++ else ++ whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ++ fi ++ ;; ++ esac ++ link_all_deplibs=yes ++ ;; ++ ++ sunos4*) ++ if test "x$host_vendor" = xsequent; then ++ # Use $CC to link under sequent, because it throws in some extra .o ++ # files that make .init and .fini sections work. ++ archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_direct=yes ++ hardcode_minus_L=yes ++ hardcode_shlibpath_var=no ++ ;; ++ ++ sysv4) ++ case $host_vendor in ++ sni) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=yes # is this really true??? ++ ;; ++ siemens) ++ ## LD is ld it makes a PLAMLIB ++ ## CC just makes a GrossModule. ++ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' ++ reload_cmds='$CC -r -o $output$reload_objs' ++ hardcode_direct=no ++ ;; ++ motorola) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=no #Motorola manual says yes, but my tests say they lie ++ ;; ++ esac ++ runpath_var='LD_RUN_PATH' ++ hardcode_shlibpath_var=no ++ ;; ++ ++ sysv4.3*) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_shlibpath_var=no ++ export_dynamic_flag_spec='-Bexport' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_shlibpath_var=no ++ runpath_var=LD_RUN_PATH ++ hardcode_runpath_var=yes ++ ld_shlibs=yes ++ fi ++ ;; ++ ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) ++ no_undefined_flag='${wl}-z,text' ++ archive_cmds_need_lc=no ++ hardcode_shlibpath_var=no ++ runpath_var='LD_RUN_PATH' ++ ++ if test "$GCC" = yes; then ++ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; ++ ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ no_undefined_flag='${wl}-z,text' ++ allow_undefined_flag='${wl}-z,nodefs' ++ archive_cmds_need_lc=no ++ hardcode_shlibpath_var=no ++ hardcode_libdir_flag_spec='${wl}-R,$libdir' ++ hardcode_libdir_separator=':' ++ link_all_deplibs=yes ++ export_dynamic_flag_spec='${wl}-Bexport' ++ runpath_var='LD_RUN_PATH' ++ ++ if test "$GCC" = yes; then ++ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; ++ ++ uts4*) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_shlibpath_var=no ++ ;; ++ ++ *) ++ ld_shlibs=no ++ ;; ++ esac ++ ++ if test x$host_vendor = xsni; then ++ case $host in ++ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) ++ export_dynamic_flag_spec='${wl}-Blargedynsym' ++ ;; ++ esac ++ fi ++ fi ++ ++{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5 ++echo "${ECHO_T}$ld_shlibs" >&6; } ++test "$ld_shlibs" = no && can_build_shared=no ++ ++with_gnu_ld=$with_gnu_ld ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++# ++# Do we need to explicitly link libc? ++# ++case "x$archive_cmds_need_lc" in ++x|xyes) ++ # Assume -lc should be added ++ archive_cmds_need_lc=yes ++ ++ if test "$enable_shared" = yes && test "$GCC" = yes; then ++ case $archive_cmds in ++ *'~'*) ++ # FIXME: we may have to deal with multi-command sequences. ++ ;; ++ '$CC '*) ++ # Test whether the compiler implicitly links with -lc since on some ++ # systems, -lgcc has to come before -lc. If gcc already passes -lc ++ # to ld, don't add -lc before -lgcc. ++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } ++ $RM conftest* ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } 2>conftest.err; then ++ soname=conftest ++ lib=conftest ++ libobjs=conftest.$ac_objext ++ deplibs= ++ wl=$lt_prog_compiler_wl ++ pic_flag=$lt_prog_compiler_pic ++ compiler_flags=-v ++ linker_flags=-v ++ verstring= ++ output_objdir=. ++ libname=conftest ++ lt_save_allow_undefined_flag=$allow_undefined_flag ++ allow_undefined_flag= ++ if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 ++ (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++ then ++ archive_cmds_need_lc=no ++ else ++ archive_cmds_need_lc=yes ++ fi ++ allow_undefined_flag=$lt_save_allow_undefined_flag ++ else ++ cat conftest.err 1>&5 ++ fi ++ $RM conftest* ++ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 ++echo "${ECHO_T}$archive_cmds_need_lc" >&6; } ++ ;; ++ esac ++ fi ++ ;; ++esac ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ { echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 ++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } ++ ++if test "$GCC" = yes; then ++ case $host_os in ++ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; ++ *) lt_awk_arg="/^libraries:/" ;; ++ esac ++ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then ++ # if the path contains ";" then we assume it to be the separator ++ # otherwise default to the standard path separator (i.e. ":") - it is ++ # assumed that no part of a normal pathname contains ";" but that should ++ # okay in the real world where ";" in dirpaths is itself problematic. ++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ # Ok, now we have the path, separated by spaces, we can step through it ++ # and add multilib dir if necessary. ++ lt_tmp_lt_search_path_spec= ++ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` ++ for lt_sys_path in $lt_search_path_spec; do ++ if test -d "$lt_sys_path/$lt_multi_os_dir"; then ++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" ++ else ++ test -d "$lt_sys_path" && \ ++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" ++ fi ++ done ++ lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' ++BEGIN {RS=" "; FS="/|\n";} { ++ lt_foo=""; ++ lt_count=0; ++ for (lt_i = NF; lt_i > 0; lt_i--) { ++ if ($lt_i != "" && $lt_i != ".") { ++ if ($lt_i == "..") { ++ lt_count++; ++ } else { ++ if (lt_count == 0) { ++ lt_foo="/" $lt_i lt_foo; ++ } else { ++ lt_count--; ++ } ++ } ++ } ++ } ++ if (lt_foo != "") { lt_freq[lt_foo]++; } ++ if (lt_freq[lt_foo] == 1) { print lt_foo; } ++}'` ++ sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` ++else ++ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" ++fi ++library_names_spec= ++libname_spec='lib$name' ++soname_spec= ++shrext_cmds=".so" ++postinstall_cmds= ++postuninstall_cmds= ++finish_cmds= ++finish_eval= ++shlibpath_var= ++shlibpath_overrides_runpath=unknown ++version_type=none ++dynamic_linker="$host_os ld.so" ++sys_lib_dlsearch_path_spec="/lib /usr/lib" ++need_lib_prefix=unknown ++hardcode_into_libs=no ++ ++# when you set need_version to no, make sure it does not cause -set_version ++# flags to be left without arguments ++need_version=unknown ++ ++case $host_os in ++aix3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' ++ shlibpath_var=LIBPATH ++ ++ # AIX 3 has no versioning support, so we append a major version to the name. ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; ++ ++aix[4-9]*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ hardcode_into_libs=yes ++ if test "$host_cpu" = ia64; then ++ # AIX 5 supports IA64 ++ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ else ++ # With GCC up to 2.95.x, collect2 would create an import file ++ # for dependence libraries. The import file would start with ++ # the line `#! .'. This would cause the generated library to ++ # depend on `.', always an invalid library. This was fixed in ++ # development snapshots of GCC prior to 3.0. ++ case $host_os in ++ aix4 | aix4.[01] | aix4.[01].*) ++ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' ++ echo ' yes ' ++ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then ++ : ++ else ++ can_build_shared=no ++ fi ++ ;; ++ esac ++ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct ++ # soname into executable. Probably we can add versioning support to ++ # collect2, so additional links can be useful in future. ++ if test "$aix_use_runtimelinking" = yes; then ++ # If using run time linking (on AIX 4.2 or later) use lib.so ++ # instead of lib.a to let people know that these are not ++ # typical AIX shared libraries. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ else ++ # We preserve .a as extension for shared libraries through AIX4.2 ++ # and later when we are not doing run time linking. ++ library_names_spec='${libname}${release}.a $libname.a' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ fi ++ shlibpath_var=LIBPATH ++ fi ++ ;; ++ ++amigaos*) ++ case $host_cpu in ++ powerpc) ++ # Since July 2007 AmigaOS4 officially supports .so libraries. ++ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ ;; ++ m68k) ++ library_names_spec='$libname.ixlibrary $libname.a' ++ # Create ${libname}_ixlibrary.a entries in /sys/libs. ++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ++ ;; ++ esac ++ ;; ++ ++beos*) ++ library_names_spec='${libname}${shared_ext}' ++ dynamic_linker="$host_os ld.so" ++ shlibpath_var=LIBRARY_PATH ++ ;; ++ ++bsdi[45]*) ++ version_type=linux ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" ++ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" ++ # the default ld.so.conf also contains /usr/contrib/lib and ++ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow ++ # libtool to hard-code these into programs ++ ;; ++ ++cygwin* | mingw* | pw32*) ++ version_type=windows ++ shrext_cmds=".dll" ++ need_version=no ++ need_lib_prefix=no ++ ++ case $GCC,$host_os in ++ yes,cygwin* | yes,mingw* | yes,pw32*) ++ library_names_spec='$libname.dll.a' ++ # DLL is installed to $(libdir)/../bin by postinstall_cmds ++ postinstall_cmds='base_file=`basename \${file}`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ ++ dldir=$destdir/`dirname \$dlpath`~ ++ test -d \$dldir || mkdir -p \$dldir~ ++ $install_prog $dir/$dlname \$dldir/$dlname~ ++ chmod a+x \$dldir/$dlname~ ++ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then ++ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; ++ fi' ++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ ++ dlpath=$dir/\$dldll~ ++ $RM \$dlpath' ++ shlibpath_overrides_runpath=yes ++ ++ case $host_os in ++ cygwin*) ++ # Cygwin DLLs use 'cyg' prefix rather than 'lib' ++ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ++ ;; ++ mingw*) ++ # MinGW DLLs use traditional 'lib' prefix ++ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then ++ # It is most probably a Windows format PATH printed by ++ # mingw gcc, but we are running on Cygwin. Gcc prints its search ++ # path with ; separators, and with drive letters. We can handle the ++ # drive letters (cygwin fileutils understands them), so leave them, ++ # especially as we might pass files found there to a mingw objdump, ++ # which wouldn't understand a cygwinified path. Ahh. ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ ;; ++ pw32*) ++ # pw32 DLLs use 'pw' prefix rather than 'lib' ++ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ ;; ++ esac ++ ;; ++ ++ *) ++ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ++ ;; ++ esac ++ dynamic_linker='Win32 ld.exe' ++ # FIXME: first we should search . and the directory the executable is in ++ shlibpath_var=PATH ++ ;; ++ ++darwin* | rhapsody*) ++ dynamic_linker="$host_os dyld" ++ version_type=darwin ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' ++ soname_spec='${libname}${release}${major}$shared_ext' ++ shlibpath_overrides_runpath=yes ++ shlibpath_var=DYLD_LIBRARY_PATH ++ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' ++ ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" ++ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ++ ;; ++ ++dgux*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; ++ ++freebsd1*) ++ dynamic_linker=no ++ ;; ++ ++freebsd* | dragonfly*) ++ # DragonFly does not have aout. When/if they implement a new ++ # versioning mechanism, adjust this. ++ if test -x /usr/bin/objformat; then ++ objformat=`/usr/bin/objformat` ++ else ++ case $host_os in ++ freebsd[123]*) objformat=aout ;; ++ *) objformat=elf ;; ++ esac ++ fi ++ version_type=freebsd-$objformat ++ case $version_type in ++ freebsd-elf*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ need_version=no ++ need_lib_prefix=no ++ ;; ++ freebsd-*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' ++ need_version=yes ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_os in ++ freebsd2*) ++ shlibpath_overrides_runpath=yes ++ ;; ++ freebsd3.[01]* | freebsdelf3.[01]*) ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ ++ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ *) # from 4.6 on, and DragonFly ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ esac ++ ;; ++ ++gnu*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ ;; ++ ++hpux9* | hpux10* | hpux11*) ++ # Give a soname corresponding to the major version so that dld.sl refuses to ++ # link against other versions. ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ case $host_cpu in ++ ia64*) ++ shrext_cmds='.so' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.so" ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ if test "X$HPUX_IA64_MODE" = X32; then ++ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" ++ else ++ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" ++ fi ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ hppa*64*) ++ shrext_cmds='.sl' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ *) ++ shrext_cmds='.sl' ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=SHLIB_PATH ++ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; ++ esac ++ # HP-UX runs *really* slowly unless shared libraries are mode 555. ++ postinstall_cmds='chmod 555 $lib' ++ ;; ++ ++interix[3-9]*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ ++irix5* | irix6* | nonstopux*) ++ case $host_os in ++ nonstopux*) version_type=nonstopux ;; ++ *) ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ version_type=linux ++ else ++ version_type=irix ++ fi ;; ++ esac ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' ++ case $host_os in ++ irix5* | nonstopux*) ++ libsuff= shlibsuff= ++ ;; ++ *) ++ case $LD in # libtool.m4 will add one of these switches to LD ++ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") ++ libsuff= shlibsuff= libmagic=32-bit;; ++ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") ++ libsuff=32 shlibsuff=N32 libmagic=N32;; ++ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") ++ libsuff=64 shlibsuff=64 libmagic=64-bit;; ++ *) libsuff= shlibsuff= libmagic=never-match;; ++ esac ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" ++ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" ++ hardcode_into_libs=yes ++ ;; ++ ++# No shared lib support for Linux oldld, aout, or coff. ++linux*oldld* | linux*aout* | linux*coff*) ++ dynamic_linker=no ++ ;; ++ ++# This must be Linux ELF. ++linux* | k*bsd*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ # Some binutils ld are patched to set DT_RUNPATH ++ save_LDFLAGS=$LDFLAGS ++ save_libdir=$libdir ++ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ ++ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then ++ shlibpath_overrides_runpath=yes ++fi ++ ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ LDFLAGS=$save_LDFLAGS ++ libdir=$save_libdir ++ ++ # This implies no fast_install, which is unacceptable. ++ # Some rework will be needed to allow for fast_install ++ # before this can be enabled. ++ hardcode_into_libs=yes ++ ++ # Append ld.so.conf contents to the search path ++ if test -f /etc/ld.so.conf; then ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" ++ fi ++ ++ # We used to test for /lib/ld.so.1 and disable shared libraries on ++ # powerpc, because MkLinux only supported shared libraries with the ++ # GNU dynamic linker. Since this was broken with cross compilers, ++ # most powerpc-linux boxes support dynamic linking these days and ++ # people can always --disable-shared, the test was removed, and we ++ # assume the GNU/Linux dynamic linker is in use. ++ dynamic_linker='GNU/Linux ld.so' ++ ;; ++ ++netbsdelf*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='NetBSD ld.elf_so' ++ ;; ++ ++netbsd*) ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ dynamic_linker='NetBSD (a.out) ld.so' ++ else ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='NetBSD ld.elf_so' ++ fi ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ ++newsos6) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ ;; ++ ++*nto* | *qnx*) ++ version_type=qnx ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='ldqnx.so' ++ ;; ++ ++openbsd*) ++ version_type=sunos ++ sys_lib_dlsearch_path_spec="/usr/lib" ++ need_lib_prefix=no ++ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. ++ case $host_os in ++ openbsd3.3 | openbsd3.3.*) need_version=yes ;; ++ *) need_version=no ;; ++ esac ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ case $host_os in ++ openbsd2.[89] | openbsd2.[89].*) ++ shlibpath_overrides_runpath=no ++ ;; ++ *) ++ shlibpath_overrides_runpath=yes ++ ;; ++ esac ++ else ++ shlibpath_overrides_runpath=yes ++ fi ++ ;; ++ ++os2*) ++ libname_spec='$name' ++ shrext_cmds=".dll" ++ need_lib_prefix=no ++ library_names_spec='$libname${shared_ext} $libname.a' ++ dynamic_linker='OS/2 ld.exe' ++ shlibpath_var=LIBPATH ++ ;; ++ ++osf3* | osf4* | osf5*) ++ version_type=osf ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" ++ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ++ ;; ++ ++rdos*) ++ dynamic_linker=no ++ ;; ++ ++solaris*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ # ldd complains unless libraries are executable ++ postinstall_cmds='chmod +x $lib' ++ ;; ++ ++sunos4*) ++ version_type=sunos ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ if test "$with_gnu_ld" = yes; then ++ need_lib_prefix=no ++ fi ++ need_version=yes ++ ;; ++ ++sysv4 | sysv4.3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_vendor in ++ sni) ++ shlibpath_overrides_runpath=no ++ need_lib_prefix=no ++ runpath_var=LD_RUN_PATH ++ ;; ++ siemens) ++ need_lib_prefix=no ++ ;; ++ motorola) ++ need_lib_prefix=no ++ need_version=no ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ++ ;; ++ esac ++ ;; ++ ++sysv4*MP*) ++ if test -d /usr/nec ;then ++ version_type=linux ++ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' ++ soname_spec='$libname${shared_ext}.$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ fi ++ ;; ++ ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ version_type=freebsd-elf ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ if test "$with_gnu_ld" = yes; then ++ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' ++ else ++ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' ++ case $host_os in ++ sco3.2v5*) ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ++ ;; ++ esac ++ fi ++ sys_lib_dlsearch_path_spec='/usr/lib' ++ ;; ++ ++tpf*) ++ # TPF is a cross-target only. Preferred cross-host = GNU/Linux. ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_name_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ ++uts4*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; ++ ++*) ++ dynamic_linker=no ++ ;; ++esac ++{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 ++echo "${ECHO_T}$dynamic_linker" >&6; } ++test "$dynamic_linker" = no && can_build_shared=no ++ ++variables_saved_for_relink="PATH $shlibpath_var $runpath_var" ++if test "$GCC" = yes; then ++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" ++fi ++ ++if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then ++ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" ++fi ++if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then ++ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ { echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } ++hardcode_action= ++if test -n "$hardcode_libdir_flag_spec" || ++ test -n "$runpath_var" || ++ test "X$hardcode_automatic" = "Xyes" ; then ++ ++ # We can hardcode non-existent directories. ++ if test "$hardcode_direct" != no && ++ # If the only mechanism to avoid hardcoding is shlibpath_var, we ++ # have to relink, otherwise we might link with an installed library ++ # when we should be linking with a yet-to-be-installed one ++ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && ++ test "$hardcode_minus_L" != no; then ++ # Linking always hardcodes the temporary library directory. ++ hardcode_action=relink ++ else ++ # We can link without hardcoding, and we can hardcode nonexisting dirs. ++ hardcode_action=immediate ++ fi ++else ++ # We cannot hardcode anything, or else we can only hardcode existing ++ # directories. ++ hardcode_action=unsupported ++fi ++{ echo "$as_me:$LINENO: result: $hardcode_action" >&5 ++echo "${ECHO_T}$hardcode_action" >&6; } ++ ++if test "$hardcode_action" = relink || ++ test "$inherit_rpath" = yes; then ++ # Fast installation is not supported ++ enable_fast_install=no ++elif test "$shlibpath_overrides_runpath" = yes || ++ test "$enable_shared" = no; then ++ # Fast installation is not necessary ++ enable_fast_install=needless ++fi ++ ++ ++ ++ ++ ++ ++ if test "x$enable_dlopen" != xyes; then ++ enable_dlopen=unknown ++ enable_dlopen_self=unknown ++ enable_dlopen_self_static=unknown ++else ++ lt_cv_dlopen=no ++ lt_cv_dlopen_libs= ++ ++ case $host_os in ++ beos*) ++ lt_cv_dlopen="load_add_on" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes ++ ;; ++ ++ mingw* | pw32*) ++ lt_cv_dlopen="LoadLibrary" ++ lt_cv_dlopen_libs= ++ ;; ++ ++ cygwin*) ++ lt_cv_dlopen="dlopen" ++ lt_cv_dlopen_libs= ++ ;; ++ ++ darwin*) ++ # if libdl is installed we need to link against it ++ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 ++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dl_dlopen+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldl $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dlopen (); ++int ++main () ++{ ++return dlopen (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dl_dlopen=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_dl_dlopen=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } ++if test $ac_cv_lib_dl_dlopen = yes; then ++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" ++else ++ ++ lt_cv_dlopen="dyld" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes ++ ++fi ++ ++ ;; ++ ++ *) ++ { echo "$as_me:$LINENO: checking for shl_load" >&5 ++echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; } ++if test "${ac_cv_func_shl_load+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define shl_load to an innocuous variant, in case declares shl_load. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define shl_load innocuous_shl_load ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char shl_load (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef shl_load ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char shl_load (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_shl_load || defined __stub___shl_load ++choke me ++#endif ++ ++int ++main () ++{ ++return shl_load (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_shl_load=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_func_shl_load=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 ++echo "${ECHO_T}$ac_cv_func_shl_load" >&6; } ++if test $ac_cv_func_shl_load = yes; then ++ lt_cv_dlopen="shl_load" ++else ++ { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 ++echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dld_shl_load+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldld $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char shl_load (); ++int ++main () ++{ ++return shl_load (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dld_shl_load=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_dld_shl_load=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 ++echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; } ++if test $ac_cv_lib_dld_shl_load = yes; then ++ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" ++else ++ { echo "$as_me:$LINENO: checking for dlopen" >&5 ++echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; } ++if test "${ac_cv_func_dlopen+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define dlopen to an innocuous variant, in case declares dlopen. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define dlopen innocuous_dlopen ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char dlopen (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef dlopen ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dlopen (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_dlopen || defined __stub___dlopen ++choke me ++#endif ++ ++int ++main () ++{ ++return dlopen (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_dlopen=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_func_dlopen=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_func_dlopen" >&6; } ++if test $ac_cv_func_dlopen = yes; then ++ lt_cv_dlopen="dlopen" ++else ++ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 ++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dl_dlopen+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldl $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dlopen (); ++int ++main () ++{ ++return dlopen (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dl_dlopen=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_dl_dlopen=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } ++if test $ac_cv_lib_dl_dlopen = yes; then ++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" ++else ++ { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 ++echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; } ++if test "${ac_cv_lib_svld_dlopen+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lsvld $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dlopen (); ++int ++main () ++{ ++return dlopen (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_svld_dlopen=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_svld_dlopen=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; } ++if test $ac_cv_lib_svld_dlopen = yes; then ++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" ++else ++ { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 ++echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dld_dld_link+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldld $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dld_link (); ++int ++main () ++{ ++return dld_link (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dld_dld_link=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_dld_dld_link=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 ++echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; } ++if test $ac_cv_lib_dld_dld_link = yes; then ++ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" ++fi ++ ++ ++fi ++ ++ ++fi ++ ++ ++fi ++ ++ ++fi ++ ++ ++fi ++ ++ ;; ++ esac ++ ++ if test "x$lt_cv_dlopen" != xno; then ++ enable_dlopen=yes ++ else ++ enable_dlopen=no ++ fi ++ ++ case $lt_cv_dlopen in ++ dlopen) ++ save_CPPFLAGS="$CPPFLAGS" ++ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" ++ ++ save_LDFLAGS="$LDFLAGS" ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" ++ ++ save_LIBS="$LIBS" ++ LIBS="$lt_cv_dlopen_libs $LIBS" ++ ++ { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 ++echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; } ++if test "${lt_cv_dlopen_self+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test "$cross_compiling" = yes; then : ++ lt_cv_dlopen_self=cross ++else ++ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 ++ lt_status=$lt_dlunknown ++ cat > conftest.$ac_ext <<_LT_EOF ++#line __oline__ "configure" ++#include "confdefs.h" ++ ++#if HAVE_DLFCN_H ++#include ++#endif ++ ++#include ++ ++#ifdef RTLD_GLOBAL ++# define LT_DLGLOBAL RTLD_GLOBAL ++#else ++# ifdef DL_GLOBAL ++# define LT_DLGLOBAL DL_GLOBAL ++# else ++# define LT_DLGLOBAL 0 ++# endif ++#endif ++ ++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we ++ find out it does not work in some platform. */ ++#ifndef LT_DLLAZY_OR_NOW ++# ifdef RTLD_LAZY ++# define LT_DLLAZY_OR_NOW RTLD_LAZY ++# else ++# ifdef DL_LAZY ++# define LT_DLLAZY_OR_NOW DL_LAZY ++# else ++# ifdef RTLD_NOW ++# define LT_DLLAZY_OR_NOW RTLD_NOW ++# else ++# ifdef DL_NOW ++# define LT_DLLAZY_OR_NOW DL_NOW ++# else ++# define LT_DLLAZY_OR_NOW 0 ++# endif ++# endif ++# endif ++# endif ++#endif ++ ++#ifdef __cplusplus ++extern "C" void exit (int); ++#endif ++ ++void fnord() { int i=42;} ++int main () ++{ ++ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); ++ int status = $lt_dlunknown; ++ ++ if (self) ++ { ++ if (dlsym (self,"fnord")) status = $lt_dlno_uscore; ++ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; ++ /* dlclose (self); */ ++ } ++ else ++ puts (dlerror ()); ++ ++ exit (status); ++} ++_LT_EOF ++ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then ++ (./conftest; exit; ) >&5 2>/dev/null ++ lt_status=$? ++ case x$lt_status in ++ x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; ++ x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; ++ x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; ++ esac ++ else : ++ # compilation failed ++ lt_cv_dlopen_self=no ++ fi ++fi ++rm -fr conftest* ++ ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 ++echo "${ECHO_T}$lt_cv_dlopen_self" >&6; } ++ ++ if test "x$lt_cv_dlopen_self" = xyes; then ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" ++ { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 ++echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; } ++if test "${lt_cv_dlopen_self_static+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test "$cross_compiling" = yes; then : ++ lt_cv_dlopen_self_static=cross ++else ++ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 ++ lt_status=$lt_dlunknown ++ cat > conftest.$ac_ext <<_LT_EOF ++#line __oline__ "configure" ++#include "confdefs.h" ++ ++#if HAVE_DLFCN_H ++#include ++#endif ++ ++#include ++ ++#ifdef RTLD_GLOBAL ++# define LT_DLGLOBAL RTLD_GLOBAL ++#else ++# ifdef DL_GLOBAL ++# define LT_DLGLOBAL DL_GLOBAL ++# else ++# define LT_DLGLOBAL 0 ++# endif ++#endif ++ ++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we ++ find out it does not work in some platform. */ ++#ifndef LT_DLLAZY_OR_NOW ++# ifdef RTLD_LAZY ++# define LT_DLLAZY_OR_NOW RTLD_LAZY ++# else ++# ifdef DL_LAZY ++# define LT_DLLAZY_OR_NOW DL_LAZY ++# else ++# ifdef RTLD_NOW ++# define LT_DLLAZY_OR_NOW RTLD_NOW ++# else ++# ifdef DL_NOW ++# define LT_DLLAZY_OR_NOW DL_NOW ++# else ++# define LT_DLLAZY_OR_NOW 0 ++# endif ++# endif ++# endif ++# endif ++#endif ++ ++#ifdef __cplusplus ++extern "C" void exit (int); ++#endif ++ ++void fnord() { int i=42;} ++int main () ++{ ++ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); ++ int status = $lt_dlunknown; ++ ++ if (self) ++ { ++ if (dlsym (self,"fnord")) status = $lt_dlno_uscore; ++ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; ++ /* dlclose (self); */ ++ } ++ else ++ puts (dlerror ()); ++ ++ exit (status); ++} ++_LT_EOF ++ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then ++ (./conftest; exit; ) >&5 2>/dev/null ++ lt_status=$? ++ case x$lt_status in ++ x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; ++ x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; ++ x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; ++ esac ++ else : ++ # compilation failed ++ lt_cv_dlopen_self_static=no ++ fi ++fi ++rm -fr conftest* ++ ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 ++echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; } ++ fi ++ ++ CPPFLAGS="$save_CPPFLAGS" ++ LDFLAGS="$save_LDFLAGS" ++ LIBS="$save_LIBS" ++ ;; ++ esac ++ ++ case $lt_cv_dlopen_self in ++ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; ++ *) enable_dlopen_self=unknown ;; ++ esac ++ ++ case $lt_cv_dlopen_self_static in ++ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; ++ *) enable_dlopen_self_static=unknown ;; ++ esac ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++striplib= ++old_striplib= ++{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 ++echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; } ++if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then ++ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" ++ test -z "$striplib" && striplib="$STRIP --strip-unneeded" ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++# FIXME - insert some real tests, host_os isn't really good enough ++ case $host_os in ++ darwin*) ++ if test -n "$STRIP" ; then ++ striplib="$STRIP -x" ++ old_striplib="$STRIP -S" ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ fi ++ ;; ++ *) ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ ;; ++ esac ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ # Report which library types will actually be built ++ { echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 ++echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; } ++ { echo "$as_me:$LINENO: result: $can_build_shared" >&5 ++echo "${ECHO_T}$can_build_shared" >&6; } ++ ++ { echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 ++echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; } ++ test "$can_build_shared" = "no" && enable_shared=no ++ ++ # On AIX, shared libraries and static libraries use the same namespace, and ++ # are all built from PIC. ++ case $host_os in ++ aix3*) ++ test "$enable_shared" = yes && enable_static=no ++ if test -n "$RANLIB"; then ++ archive_cmds="$archive_cmds~\$RANLIB \$lib" ++ postinstall_cmds='$RANLIB $lib' ++ fi ++ ;; ++ ++ aix[4-9]*) ++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then ++ test "$enable_shared" = yes && enable_static=no ++ fi ++ ;; ++ esac ++ { echo "$as_me:$LINENO: result: $enable_shared" >&5 ++echo "${ECHO_T}$enable_shared" >&6; } ++ ++ { echo "$as_me:$LINENO: checking whether to build static libraries" >&5 ++echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; } ++ # Make sure either enable_shared or enable_static is yes. ++ test "$enable_shared" = yes || enable_static=yes ++ { echo "$as_me:$LINENO: result: $enable_static" >&5 ++echo "${ECHO_T}$enable_static" >&6; } ++ ++ ++ ++ ++fi ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++CC="$lt_save_CC" ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ac_config_commands="$ac_config_commands libtool" ++ ++ ++ ++ ++# Only expand once: ++ ++ ++ ++case "$am__api_version" in ++ 1.01234) ++ { { echo "$as_me:$LINENO: error: Automake 1.5 or newer is required to use intltool" >&5 ++echo "$as_me: error: Automake 1.5 or newer is required to use intltool" >&2;} ++ { (exit 1); exit 1; }; } ++ ;; ++ *) ++ ;; ++esac ++ ++if test -n "0.35.0"; then ++ { echo "$as_me:$LINENO: checking for intltool >= 0.35.0" >&5 ++echo $ECHO_N "checking for intltool >= 0.35.0... $ECHO_C" >&6; } ++ ++ INTLTOOL_REQUIRED_VERSION_AS_INT=`echo 0.35.0 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` ++ INTLTOOL_APPLIED_VERSION=`awk -F\" '/\\$VERSION / { print $ 2; }' ${ac_aux_dir}/intltool-update.in` ++ INTLTOOL_APPLIED_VERSION_AS_INT=`awk -F\" '/\\$VERSION / { split($ 2, VERSION, "."); print VERSION[1] * 1000 + VERSION[2] * 100 + VERSION[3];}' ${ac_aux_dir}/intltool-update.in` ++ ++ { echo "$as_me:$LINENO: result: $INTLTOOL_APPLIED_VERSION found" >&5 ++echo "${ECHO_T}$INTLTOOL_APPLIED_VERSION found" >&6; } ++ test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || ++ { { echo "$as_me:$LINENO: error: Your intltool is too old. You need intltool 0.35.0 or later." >&5 ++echo "$as_me: error: Your intltool is too old. You need intltool 0.35.0 or later." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++ INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -p $(top_srcdir)/po $< $@' ++ INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u /tmp $< $@' ++ INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++# Check the gettext tools to make sure they are GNU ++# Extract the first word of "xgettext", so it can be a program name with args. ++set dummy xgettext; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_XGETTEXT+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $XGETTEXT in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_XGETTEXT="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++XGETTEXT=$ac_cv_path_XGETTEXT ++if test -n "$XGETTEXT"; then ++ { echo "$as_me:$LINENO: result: $XGETTEXT" >&5 ++echo "${ECHO_T}$XGETTEXT" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++# Extract the first word of "msgmerge", so it can be a program name with args. ++set dummy msgmerge; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_MSGMERGE+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $MSGMERGE in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_MSGMERGE="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++MSGMERGE=$ac_cv_path_MSGMERGE ++if test -n "$MSGMERGE"; then ++ { echo "$as_me:$LINENO: result: $MSGMERGE" >&5 ++echo "${ECHO_T}$MSGMERGE" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++# Extract the first word of "msgfmt", so it can be a program name with args. ++set dummy msgfmt; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_MSGFMT+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $MSGFMT in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_MSGFMT="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++MSGFMT=$ac_cv_path_MSGFMT ++if test -n "$MSGFMT"; then ++ { echo "$as_me:$LINENO: result: $MSGFMT" >&5 ++echo "${ECHO_T}$MSGFMT" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then ++ { { echo "$as_me:$LINENO: error: GNU gettext tools not found; required for intltool" >&5 ++echo "$as_me: error: GNU gettext tools not found; required for intltool" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" ++mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" ++mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" ++if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then ++ { { echo "$as_me:$LINENO: error: GNU gettext tools not found; required for intltool" >&5 ++echo "$as_me: error: GNU gettext tools not found; required for intltool" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++# Use the tools built into the package, not the ones that are installed. ++INTLTOOL_EXTRACT='$(top_builddir)/intltool-extract' ++ ++INTLTOOL_MERGE='$(top_builddir)/intltool-merge' ++ ++INTLTOOL_UPDATE='$(top_builddir)/intltool-update' ++ ++ ++# Extract the first word of "perl", so it can be a program name with args. ++set dummy perl; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_INTLTOOL_PERL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $INTLTOOL_PERL in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_INTLTOOL_PERL="$INTLTOOL_PERL" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_INTLTOOL_PERL="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++INTLTOOL_PERL=$ac_cv_path_INTLTOOL_PERL ++if test -n "$INTLTOOL_PERL"; then ++ { echo "$as_me:$LINENO: result: $INTLTOOL_PERL" >&5 ++echo "${ECHO_T}$INTLTOOL_PERL" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++if test -z "$INTLTOOL_PERL"; then ++ { { echo "$as_me:$LINENO: error: perl not found; required for intltool" >&5 ++echo "$as_me: error: perl not found; required for intltool" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "`$INTLTOOL_PERL -v | fgrep '5.' 2> /dev/null`"; then ++ { { echo "$as_me:$LINENO: error: perl 5.x required for intltool" >&5 ++echo "$as_me: error: perl 5.x required for intltool" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test "x" != "xno-xml"; then ++ { echo "$as_me:$LINENO: checking for XML::Parser" >&5 ++echo $ECHO_N "checking for XML::Parser... $ECHO_C" >&6; } ++ if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then ++ { echo "$as_me:$LINENO: result: ok" >&5 ++echo "${ECHO_T}ok" >&6; } ++ else ++ { { echo "$as_me:$LINENO: error: XML::Parser perl module is required for intltool" >&5 ++echo "$as_me: error: XML::Parser perl module is required for intltool" >&2;} ++ { (exit 1); exit 1; }; } ++ fi ++fi ++ ++# Substitute ALL_LINGUAS so we can use it in po/Makefile ++ ++ ++# Set DATADIRNAME correctly if it is not set yet ++# (copied from glib-gettext.m4) ++if test -z "$DATADIRNAME"; then ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++extern int _nl_msg_cat_cntr; ++ return _nl_msg_cat_cntr ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ DATADIRNAME=share ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ case $host in ++ *-*-solaris*) ++ { echo "$as_me:$LINENO: checking for bind_textdomain_codeset" >&5 ++echo $ECHO_N "checking for bind_textdomain_codeset... $ECHO_C" >&6; } ++if test "${ac_cv_func_bind_textdomain_codeset+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define bind_textdomain_codeset to an innocuous variant, in case declares bind_textdomain_codeset. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define bind_textdomain_codeset innocuous_bind_textdomain_codeset ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char bind_textdomain_codeset (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef bind_textdomain_codeset ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char bind_textdomain_codeset (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_bind_textdomain_codeset || defined __stub___bind_textdomain_codeset ++choke me ++#endif ++ ++int ++main () ++{ ++return bind_textdomain_codeset (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_bind_textdomain_codeset=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_func_bind_textdomain_codeset=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_bind_textdomain_codeset" >&5 ++echo "${ECHO_T}$ac_cv_func_bind_textdomain_codeset" >&6; } ++if test $ac_cv_func_bind_textdomain_codeset = yes; then ++ DATADIRNAME=share ++else ++ DATADIRNAME=lib ++fi ++ ++ ;; ++ *) ++ DATADIRNAME=lib ++ ;; ++ esac ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++ ++ ++ ++ ++ ++ac_config_commands="$ac_config_commands intltool" ++ ++ ++ ++ ++ ++ ++ # Check whether --enable-compile-warnings was given. ++if test "${enable_compile_warnings+set}" = set; then ++ enableval=$enable_compile_warnings; ++else ++ enable_compile_warnings="yes" ++fi ++ ++ ++ warnCFLAGS= ++ if test "x$GCC" != xyes; then ++ enable_compile_warnings=no ++ fi ++ ++ warning_flags= ++ realsave_CFLAGS="$CFLAGS" ++ ++ case "$enable_compile_warnings" in ++ no) ++ warning_flags= ++ ;; ++ minimum) ++ warning_flags="-Wall" ++ ;; ++ yes) ++ warning_flags="-Wall -Wmissing-prototypes" ++ ;; ++ maximum|error) ++ warning_flags="-Wall -Wmissing-prototypes -Wnested-externs -Wpointer-arith" ++ CFLAGS="$warning_flags $CFLAGS" ++ for option in -Wno-sign-compare; do ++ SAVE_CFLAGS="$CFLAGS" ++ CFLAGS="$CFLAGS $option" ++ { echo "$as_me:$LINENO: checking whether gcc understands $option" >&5 ++echo $ECHO_N "checking whether gcc understands $option... $ECHO_C" >&6; } ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ has_option=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ has_option=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ CFLAGS="$SAVE_CFLAGS" ++ { echo "$as_me:$LINENO: result: $has_option" >&5 ++echo "${ECHO_T}$has_option" >&6; } ++ if test $has_option = yes; then ++ warning_flags="$warning_flags $option" ++ fi ++ unset has_option ++ unset SAVE_CFLAGS ++ done ++ unset option ++ if test "$enable_compile_warnings" = "error" ; then ++ warning_flags="$warning_flags -Werror" ++ fi ++ ;; ++ *) ++ { { echo "$as_me:$LINENO: error: Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" >&5 ++echo "$as_me: error: Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" >&2;} ++ { (exit 1); exit 1; }; } ++ ;; ++ esac ++ CFLAGS="$realsave_CFLAGS" ++ { echo "$as_me:$LINENO: checking what warning flags to pass to the C compiler" >&5 ++echo $ECHO_N "checking what warning flags to pass to the C compiler... $ECHO_C" >&6; } ++ { echo "$as_me:$LINENO: result: $warning_flags" >&5 ++echo "${ECHO_T}$warning_flags" >&6; } ++ ++ # Check whether --enable-iso-c was given. ++if test "${enable_iso_c+set}" = set; then ++ enableval=$enable_iso_c; ++else ++ enable_iso_c=no ++fi ++ ++ ++ { echo "$as_me:$LINENO: checking what language compliance flags to pass to the C compiler" >&5 ++echo $ECHO_N "checking what language compliance flags to pass to the C compiler... $ECHO_C" >&6; } ++ complCFLAGS= ++ if test "x$enable_iso_c" != "xno"; then ++ if test "x$GCC" = "xyes"; then ++ case " $CFLAGS " in ++ *\ \ -ansi\ \ *) ;; ++ *) complCFLAGS="$complCFLAGS -ansi" ;; ++ esac ++ case " $CFLAGS " in ++ *\ \ -pedantic\ \ *) ;; ++ *) complCFLAGS="$complCFLAGS -pedantic" ;; ++ esac ++ fi ++ fi ++ { echo "$as_me:$LINENO: result: $complCFLAGS" >&5 ++echo "${ECHO_T}$complCFLAGS" >&6; } ++ ++ WARN_CFLAGS="$warning_flags $complCFLAGS" ++ ++ ++ ++ ++if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. ++set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_PKG_CONFIG+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $PKG_CONFIG in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++PKG_CONFIG=$ac_cv_path_PKG_CONFIG ++if test -n "$PKG_CONFIG"; then ++ { echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5 ++echo "${ECHO_T}$PKG_CONFIG" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_path_PKG_CONFIG"; then ++ ac_pt_PKG_CONFIG=$PKG_CONFIG ++ # Extract the first word of "pkg-config", so it can be a program name with args. ++set dummy pkg-config; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $ac_pt_PKG_CONFIG in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG ++if test -n "$ac_pt_PKG_CONFIG"; then ++ { echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5 ++echo "${ECHO_T}$ac_pt_PKG_CONFIG" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_pt_PKG_CONFIG" = x; then ++ PKG_CONFIG="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ PKG_CONFIG=$ac_pt_PKG_CONFIG ++ fi ++else ++ PKG_CONFIG="$ac_cv_path_PKG_CONFIG" ++fi ++ ++fi ++if test -n "$PKG_CONFIG"; then ++ _pkg_min_version=0.9.0 ++ { echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5 ++echo $ECHO_N "checking pkg-config is at least version $_pkg_min_version... $ECHO_C" >&6; } ++ if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ PKG_CONFIG="" ++ fi ++ ++fi ++ ++gdu_cv_version_required=0.3.2 ++ ++if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gnome-doc-utils >= \$gdu_cv_version_required\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "gnome-doc-utils >= $gdu_cv_version_required") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ gdu_cv_have_gdu=yes ++else ++ gdu_cv_have_gdu=no ++fi ++ ++if test "$gdu_cv_have_gdu" = "yes"; then ++ : ++else ++ { { echo "$as_me:$LINENO: error: gnome-doc-utils >= $gdu_cv_version_required not found" >&5 ++echo "$as_me: error: gnome-doc-utils >= $gdu_cv_version_required not found" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++ ++ ++# Check whether --with-help-dir was given. ++if test "${with_help_dir+set}" = set; then ++ withval=$with_help_dir; ++else ++ with_help_dir='${datadir}/gnome/help' ++fi ++ ++HELP_DIR="$with_help_dir" ++ ++ ++ ++# Check whether --with-omf-dir was given. ++if test "${with_omf_dir+set}" = set; then ++ withval=$with_omf_dir; ++else ++ with_omf_dir='${datadir}/omf' ++fi ++ ++OMF_DIR="$with_omf_dir" ++ ++ ++ ++# Check whether --with-help-formats was given. ++if test "${with_help_formats+set}" = set; then ++ withval=$with_help_formats; ++else ++ with_help_formats='' ++fi ++ ++DOC_USER_FORMATS="$with_help_formats" ++ ++ ++# Check whether --enable-scrollkeeper was given. ++if test "${enable_scrollkeeper+set}" = set; then ++ enableval=$enable_scrollkeeper; ++else ++ enable_scrollkeeper=yes ++fi ++ ++ ++ ++if test "$gdu_cv_have_gdu" = "yes" -a "$enable_scrollkeeper" = "yes"; then ++ ENABLE_SK_TRUE= ++ ENABLE_SK_FALSE='#' ++else ++ ENABLE_SK_TRUE='#' ++ ENABLE_SK_FALSE= ++fi ++ ++ ++DISTCHECK_CONFIGURE_FLAGS="--disable-scrollkeeper $DISTCHECK_CONFIGURE_FLAGS" ++ ++ ++ ++ ++if test "$gdu_cv_have_gdu" = "yes"; then ++ HAVE_GNOME_DOC_UTILS_TRUE= ++ HAVE_GNOME_DOC_UTILS_FALSE='#' ++else ++ HAVE_GNOME_DOC_UTILS_TRUE='#' ++ HAVE_GNOME_DOC_UTILS_FALSE= ++fi ++ ++ ++ ++ ++# Extract the first word of "glib-genmarshal", so it can be a program name with args. ++set dummy glib-genmarshal; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_GLIB_GENMARSHAL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $GLIB_GENMARSHAL in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_GLIB_GENMARSHAL="$GLIB_GENMARSHAL" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_GLIB_GENMARSHAL="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++GLIB_GENMARSHAL=$ac_cv_path_GLIB_GENMARSHAL ++if test -n "$GLIB_GENMARSHAL"; then ++ { echo "$as_me:$LINENO: result: $GLIB_GENMARSHAL" >&5 ++echo "${ECHO_T}$GLIB_GENMARSHAL" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ ++if test "$GCC" = "yes"; then ++ CPPFLAGS="$CPPFLAGS -Wcast-align -Wno-uninitialized" ++ CPPFLAGS="$CPPFLAGS -Wall -Wformat-security" ++fi ++ ++CPPFLAGS="$CPPFLAGS -g" ++CPPFLAGS="$CPPFLAGS -fexceptions" ++ ++#CPPFLAGS="$CPPFLAGS -c -pg" ++#LDFLAGS="$LDFLAGS -pg" ++ ++GETTEXT_PACKAGE=gnome-power-manager ++ ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define GETTEXT_PACKAGE "gnome-power-manager" ++_ACEOF ++ ++ ++ ++ ++for ac_header in locale.h ++do ++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ { echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++fi ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++else ++ # Is the header compilable? ++{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 ++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++$ac_includes_default ++@%:@include <$ac_header> ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_header_compiler=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_header_compiler=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } ++ ++# Is the header present? ++{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 ++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++@%:@include <$ac_header> ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ ac_header_preproc=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_header_preproc=no ++fi ++ ++rm -f conftest.err conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } ++ ++# So? What about this header? ++case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in ++ yes:no: ) ++ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 ++echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 ++echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ++ ac_header_preproc=yes ++ ;; ++ no:yes:* ) ++ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 ++echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 ++echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 ++echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 ++echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 ++echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 ++echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ++ ++ ;; ++esac ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ eval "$as_ac_Header=\$ac_header_preproc" ++fi ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++ ++fi ++if test `eval echo '${'$as_ac_Header'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++@%:@define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++_ACEOF ++ ++fi ++ ++done ++ ++ if test $ac_cv_header_locale_h = yes; then ++ { echo "$as_me:$LINENO: checking for LC_MESSAGES" >&5 ++echo $ECHO_N "checking for LC_MESSAGES... $ECHO_C" >&6; } ++if test "${am_cv_val_LC_MESSAGES+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++int ++main () ++{ ++return LC_MESSAGES ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ am_cv_val_LC_MESSAGES=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ am_cv_val_LC_MESSAGES=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $am_cv_val_LC_MESSAGES" >&5 ++echo "${ECHO_T}$am_cv_val_LC_MESSAGES" >&6; } ++ if test $am_cv_val_LC_MESSAGES = yes; then ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_LC_MESSAGES 1 ++_ACEOF ++ ++ fi ++ fi ++ USE_NLS=yes ++ ++ ++ gt_cv_have_gettext=no ++ ++ CATOBJEXT=NONE ++ XGETTEXT=: ++ INTLLIBS= ++ ++ if test "${ac_cv_header_libintl_h+set}" = set; then ++ { echo "$as_me:$LINENO: checking for libintl.h" >&5 ++echo $ECHO_N "checking for libintl.h... $ECHO_C" >&6; } ++if test "${ac_cv_header_libintl_h+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_header_libintl_h" >&5 ++echo "${ECHO_T}$ac_cv_header_libintl_h" >&6; } ++else ++ # Is the header compilable? ++{ echo "$as_me:$LINENO: checking libintl.h usability" >&5 ++echo $ECHO_N "checking libintl.h usability... $ECHO_C" >&6; } ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++$ac_includes_default ++@%:@include ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_header_compiler=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_header_compiler=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } ++ ++# Is the header present? ++{ echo "$as_me:$LINENO: checking libintl.h presence" >&5 ++echo $ECHO_N "checking libintl.h presence... $ECHO_C" >&6; } ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++@%:@include ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ ac_header_preproc=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_header_preproc=no ++fi ++ ++rm -f conftest.err conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } ++ ++# So? What about this header? ++case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in ++ yes:no: ) ++ { echo "$as_me:$LINENO: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&5 ++echo "$as_me: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the compiler's result" >&5 ++echo "$as_me: WARNING: libintl.h: proceeding with the compiler's result" >&2;} ++ ac_header_preproc=yes ++ ;; ++ no:yes:* ) ++ { echo "$as_me:$LINENO: WARNING: libintl.h: present but cannot be compiled" >&5 ++echo "$as_me: WARNING: libintl.h: present but cannot be compiled" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: check for missing prerequisite headers?" >&5 ++echo "$as_me: WARNING: libintl.h: check for missing prerequisite headers?" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: see the Autoconf documentation" >&5 ++echo "$as_me: WARNING: libintl.h: see the Autoconf documentation" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: section \"Present But Cannot Be Compiled\"" >&5 ++echo "$as_me: WARNING: libintl.h: section \"Present But Cannot Be Compiled\"" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the preprocessor's result" >&5 ++echo "$as_me: WARNING: libintl.h: proceeding with the preprocessor's result" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: in the future, the compiler will take precedence" >&5 ++echo "$as_me: WARNING: libintl.h: in the future, the compiler will take precedence" >&2;} ++ ++ ;; ++esac ++{ echo "$as_me:$LINENO: checking for libintl.h" >&5 ++echo $ECHO_N "checking for libintl.h... $ECHO_C" >&6; } ++if test "${ac_cv_header_libintl_h+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_cv_header_libintl_h=$ac_header_preproc ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_header_libintl_h" >&5 ++echo "${ECHO_T}$ac_cv_header_libintl_h" >&6; } ++ ++fi ++if test $ac_cv_header_libintl_h = yes; then ++ gt_cv_func_dgettext_libintl="no" ++ libintl_extra_libs="" ++ ++ # ++ # First check in libc ++ # ++ { echo "$as_me:$LINENO: checking for ngettext in libc" >&5 ++echo $ECHO_N "checking for ngettext in libc... $ECHO_C" >&6; } ++if test "${gt_cv_func_ngettext_libc+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++#include ++ ++int ++main () ++{ ++return !ngettext ("","", 1) ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ gt_cv_func_ngettext_libc=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ gt_cv_func_ngettext_libc=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ ++fi ++{ echo "$as_me:$LINENO: result: $gt_cv_func_ngettext_libc" >&5 ++echo "${ECHO_T}$gt_cv_func_ngettext_libc" >&6; } ++ ++ if test "$gt_cv_func_ngettext_libc" = "yes" ; then ++ { echo "$as_me:$LINENO: checking for dgettext in libc" >&5 ++echo $ECHO_N "checking for dgettext in libc... $ECHO_C" >&6; } ++if test "${gt_cv_func_dgettext_libc+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++#include ++ ++int ++main () ++{ ++return !dgettext ("","") ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ gt_cv_func_dgettext_libc=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ gt_cv_func_dgettext_libc=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ ++fi ++{ echo "$as_me:$LINENO: result: $gt_cv_func_dgettext_libc" >&5 ++echo "${ECHO_T}$gt_cv_func_dgettext_libc" >&6; } ++ fi ++ ++ if test "$gt_cv_func_ngettext_libc" = "yes" ; then ++ ++for ac_func in bind_textdomain_codeset ++do ++as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define $ac_func to an innocuous variant, in case declares $ac_func. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define $ac_func innocuous_$ac_func ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char $ac_func (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef $ac_func ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char $ac_func (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_$ac_func || defined __stub___$ac_func ++choke me ++#endif ++ ++int ++main () ++{ ++return $ac_func (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ eval "$as_ac_var=yes" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ eval "$as_ac_var=no" ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++if test `eval echo '${'$as_ac_var'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 ++_ACEOF ++ ++fi ++done ++ ++ fi ++ ++ # ++ # If we don't have everything we want, check in libintl ++ # ++ if test "$gt_cv_func_dgettext_libc" != "yes" \ ++ || test "$gt_cv_func_ngettext_libc" != "yes" \ ++ || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then ++ ++ { echo "$as_me:$LINENO: checking for bindtextdomain in -lintl" >&5 ++echo $ECHO_N "checking for bindtextdomain in -lintl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_intl_bindtextdomain+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lintl $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char bindtextdomain (); ++int ++main () ++{ ++return bindtextdomain (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_intl_bindtextdomain=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_intl_bindtextdomain=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_bindtextdomain" >&5 ++echo "${ECHO_T}$ac_cv_lib_intl_bindtextdomain" >&6; } ++if test $ac_cv_lib_intl_bindtextdomain = yes; then ++ { echo "$as_me:$LINENO: checking for ngettext in -lintl" >&5 ++echo $ECHO_N "checking for ngettext in -lintl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_intl_ngettext+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lintl $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char ngettext (); ++int ++main () ++{ ++return ngettext (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_intl_ngettext=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_intl_ngettext=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_ngettext" >&5 ++echo "${ECHO_T}$ac_cv_lib_intl_ngettext" >&6; } ++if test $ac_cv_lib_intl_ngettext = yes; then ++ { echo "$as_me:$LINENO: checking for dgettext in -lintl" >&5 ++echo $ECHO_N "checking for dgettext in -lintl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_intl_dgettext+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lintl $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dgettext (); ++int ++main () ++{ ++return dgettext (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_intl_dgettext=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_intl_dgettext=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_dgettext" >&5 ++echo "${ECHO_T}$ac_cv_lib_intl_dgettext" >&6; } ++if test $ac_cv_lib_intl_dgettext = yes; then ++ gt_cv_func_dgettext_libintl=yes ++fi ++ ++fi ++ ++fi ++ ++ ++ if test "$gt_cv_func_dgettext_libintl" != "yes" ; then ++ { echo "$as_me:$LINENO: checking if -liconv is needed to use gettext" >&5 ++echo $ECHO_N "checking if -liconv is needed to use gettext... $ECHO_C" >&6; } ++ { echo "$as_me:$LINENO: result: " >&5 ++echo "${ECHO_T}" >&6; } ++ { echo "$as_me:$LINENO: checking for ngettext in -lintl" >&5 ++echo $ECHO_N "checking for ngettext in -lintl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_intl_ngettext+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lintl -liconv $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char ngettext (); ++int ++main () ++{ ++return ngettext (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_intl_ngettext=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_intl_ngettext=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_ngettext" >&5 ++echo "${ECHO_T}$ac_cv_lib_intl_ngettext" >&6; } ++if test $ac_cv_lib_intl_ngettext = yes; then ++ { echo "$as_me:$LINENO: checking for dcgettext in -lintl" >&5 ++echo $ECHO_N "checking for dcgettext in -lintl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_intl_dcgettext+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lintl -liconv $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dcgettext (); ++int ++main () ++{ ++return dcgettext (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_intl_dcgettext=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_intl_dcgettext=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_dcgettext" >&5 ++echo "${ECHO_T}$ac_cv_lib_intl_dcgettext" >&6; } ++if test $ac_cv_lib_intl_dcgettext = yes; then ++ gt_cv_func_dgettext_libintl=yes ++ libintl_extra_libs=-liconv ++else ++ : ++fi ++ ++else ++ : ++fi ++ ++ fi ++ ++ # ++ # If we found libintl, then check in it for bind_textdomain_codeset(); ++ # we'll prefer libc if neither have bind_textdomain_codeset(), ++ # and both have dgettext and ngettext ++ # ++ if test "$gt_cv_func_dgettext_libintl" = "yes" ; then ++ glib_save_LIBS="$LIBS" ++ LIBS="$LIBS -lintl $libintl_extra_libs" ++ unset ac_cv_func_bind_textdomain_codeset ++ ++for ac_func in bind_textdomain_codeset ++do ++as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define $ac_func to an innocuous variant, in case declares $ac_func. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define $ac_func innocuous_$ac_func ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char $ac_func (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef $ac_func ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char $ac_func (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_$ac_func || defined __stub___$ac_func ++choke me ++#endif ++ ++int ++main () ++{ ++return $ac_func (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ eval "$as_ac_var=yes" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ eval "$as_ac_var=no" ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++if test `eval echo '${'$as_ac_var'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 ++_ACEOF ++ ++fi ++done ++ ++ LIBS="$glib_save_LIBS" ++ ++ if test "$ac_cv_func_bind_textdomain_codeset" = "yes" ; then ++ gt_cv_func_dgettext_libc=no ++ else ++ if test "$gt_cv_func_dgettext_libc" = "yes" \ ++ && test "$gt_cv_func_ngettext_libc" = "yes"; then ++ gt_cv_func_dgettext_libintl=no ++ fi ++ fi ++ fi ++ fi ++ ++ if test "$gt_cv_func_dgettext_libc" = "yes" \ ++ || test "$gt_cv_func_dgettext_libintl" = "yes"; then ++ gt_cv_have_gettext=yes ++ fi ++ ++ if test "$gt_cv_func_dgettext_libintl" = "yes"; then ++ INTLLIBS="-lintl $libintl_extra_libs" ++ fi ++ ++ if test "$gt_cv_have_gettext" = "yes"; then ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_GETTEXT 1 ++_ACEOF ++ ++ # Extract the first word of "msgfmt", so it can be a program name with args. ++set dummy msgfmt; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_MSGFMT+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case "$MSGFMT" in ++ /*) ++ ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. ++ ;; ++ *) ++ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" ++ for ac_dir in $PATH; do ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$ac_word; then ++ if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then ++ ac_cv_path_MSGFMT="$ac_dir/$ac_word" ++ break ++ fi ++ fi ++ done ++ IFS="$ac_save_ifs" ++ test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no" ++ ;; ++esac ++fi ++MSGFMT="$ac_cv_path_MSGFMT" ++if test "$MSGFMT" != "no"; then ++ { echo "$as_me:$LINENO: result: $MSGFMT" >&5 ++echo "${ECHO_T}$MSGFMT" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ if test "$MSGFMT" != "no"; then ++ glib_save_LIBS="$LIBS" ++ LIBS="$LIBS $INTLLIBS" ++ ++for ac_func in dcgettext ++do ++as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define $ac_func to an innocuous variant, in case declares $ac_func. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define $ac_func innocuous_$ac_func ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char $ac_func (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef $ac_func ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char $ac_func (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_$ac_func || defined __stub___$ac_func ++choke me ++#endif ++ ++int ++main () ++{ ++return $ac_func (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ eval "$as_ac_var=yes" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ eval "$as_ac_var=no" ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++if test `eval echo '${'$as_ac_var'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 ++_ACEOF ++ ++fi ++done ++ ++ MSGFMT_OPTS= ++ { echo "$as_me:$LINENO: checking if msgfmt accepts -c" >&5 ++echo $ECHO_N "checking if msgfmt accepts -c... $ECHO_C" >&6; } ++ cat >conftest.foo <<_ACEOF ++ ++msgid "" ++msgstr "" ++"Content-Type: text/plain; charset=UTF-8\n" ++"Project-Id-Version: test 1.0\n" ++"PO-Revision-Date: 2007-02-15 12:01+0100\n" ++"Last-Translator: test \n" ++"Language-Team: C \n" ++"MIME-Version: 1.0\n" ++"Content-Transfer-Encoding: 8bit\n" ++ ++_ACEOF ++if { (echo "$as_me:$LINENO: \$MSGFMT -c -o /dev/null conftest.foo") >&5 ++ ($MSGFMT -c -o /dev/null conftest.foo) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ MSGFMT_OPTS=-c; { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++echo "$as_me: failed input was:" >&5 ++sed 's/^/| /' conftest.foo >&5 ++fi ++ ++ # Extract the first word of "gmsgfmt", so it can be a program name with args. ++set dummy gmsgfmt; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_GMSGFMT+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $GMSGFMT in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" ++ ;; ++esac ++fi ++GMSGFMT=$ac_cv_path_GMSGFMT ++if test -n "$GMSGFMT"; then ++ { echo "$as_me:$LINENO: result: $GMSGFMT" >&5 ++echo "${ECHO_T}$GMSGFMT" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ # Extract the first word of "xgettext", so it can be a program name with args. ++set dummy xgettext; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_XGETTEXT+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case "$XGETTEXT" in ++ /*) ++ ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. ++ ;; ++ *) ++ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" ++ for ac_dir in $PATH; do ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$ac_word; then ++ if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then ++ ac_cv_path_XGETTEXT="$ac_dir/$ac_word" ++ break ++ fi ++ fi ++ done ++ IFS="$ac_save_ifs" ++ test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" ++ ;; ++esac ++fi ++XGETTEXT="$ac_cv_path_XGETTEXT" ++if test "$XGETTEXT" != ":"; then ++ { echo "$as_me:$LINENO: result: $XGETTEXT" >&5 ++echo "${ECHO_T}$XGETTEXT" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++extern int _nl_msg_cat_cntr; ++ return _nl_msg_cat_cntr ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ CATOBJEXT=.gmo ++ DATADIRNAME=share ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ case $host in ++ *-*-solaris*) ++ { echo "$as_me:$LINENO: checking for bind_textdomain_codeset" >&5 ++echo $ECHO_N "checking for bind_textdomain_codeset... $ECHO_C" >&6; } ++if test "${ac_cv_func_bind_textdomain_codeset+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define bind_textdomain_codeset to an innocuous variant, in case declares bind_textdomain_codeset. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define bind_textdomain_codeset innocuous_bind_textdomain_codeset ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char bind_textdomain_codeset (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef bind_textdomain_codeset ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char bind_textdomain_codeset (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_bind_textdomain_codeset || defined __stub___bind_textdomain_codeset ++choke me ++#endif ++ ++int ++main () ++{ ++return bind_textdomain_codeset (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_bind_textdomain_codeset=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_func_bind_textdomain_codeset=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_bind_textdomain_codeset" >&5 ++echo "${ECHO_T}$ac_cv_func_bind_textdomain_codeset" >&6; } ++if test $ac_cv_func_bind_textdomain_codeset = yes; then ++ CATOBJEXT=.gmo ++ DATADIRNAME=share ++else ++ CATOBJEXT=.mo ++ DATADIRNAME=lib ++fi ++ ++ ;; ++ *) ++ CATOBJEXT=.mo ++ DATADIRNAME=lib ++ ;; ++ esac ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ LIBS="$glib_save_LIBS" ++ INSTOBJEXT=.mo ++ else ++ gt_cv_have_gettext=no ++ fi ++ fi ++ ++fi ++ ++ ++ ++ if test "$gt_cv_have_gettext" = "yes" ; then ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define ENABLE_NLS 1 ++_ACEOF ++ ++ fi ++ ++ if test "$XGETTEXT" != ":"; then ++ if $XGETTEXT --omit-header /dev/null 2> /dev/null; then ++ : ; ++ else ++ { echo "$as_me:$LINENO: result: found xgettext program is not GNU xgettext; ignore it" >&5 ++echo "${ECHO_T}found xgettext program is not GNU xgettext; ignore it" >&6; } ++ XGETTEXT=":" ++ fi ++ fi ++ ++ # We need to process the po/ directory. ++ POSUB=po ++ ++ ac_config_commands="$ac_config_commands default-1" ++ ++ ++ for lang in $ALL_LINGUAS; do ++ GMOFILES="$GMOFILES $lang.gmo" ++ POFILES="$POFILES $lang.po" ++ done ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ if test "$gt_cv_have_gettext" = "yes"; then ++ if test "x$ALL_LINGUAS" = "x"; then ++ LINGUAS= ++ else ++ { echo "$as_me:$LINENO: checking for catalogs to be installed" >&5 ++echo $ECHO_N "checking for catalogs to be installed... $ECHO_C" >&6; } ++ NEW_LINGUAS= ++ for presentlang in $ALL_LINGUAS; do ++ useit=no ++ if test "%UNSET%" != "${LINGUAS-%UNSET%}"; then ++ desiredlanguages="$LINGUAS" ++ else ++ desiredlanguages="$ALL_LINGUAS" ++ fi ++ for desiredlang in $desiredlanguages; do ++ # Use the presentlang catalog if desiredlang is ++ # a. equal to presentlang, or ++ # b. a variant of presentlang (because in this case, ++ # presentlang can be used as a fallback for messages ++ # which are not translated in the desiredlang catalog). ++ case "$desiredlang" in ++ "$presentlang"*) useit=yes;; ++ esac ++ done ++ if test $useit = yes; then ++ NEW_LINGUAS="$NEW_LINGUAS $presentlang" ++ fi ++ done ++ LINGUAS=$NEW_LINGUAS ++ { echo "$as_me:$LINENO: result: $LINGUAS" >&5 ++echo "${ECHO_T}$LINGUAS" >&6; } ++ fi ++ ++ if test -n "$LINGUAS"; then ++ for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done ++ fi ++ fi ++ ++ MKINSTALLDIRS= ++ if test -n "$ac_aux_dir"; then ++ MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" ++ fi ++ if test -z "$MKINSTALLDIRS"; then ++ MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" ++ fi ++ ++ ++ test -d po || mkdir po ++ if test "x$srcdir" != "x."; then ++ if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then ++ posrcprefix="$srcdir/" ++ else ++ posrcprefix="../$srcdir/" ++ fi ++ else ++ posrcprefix="../" ++ fi ++ rm -f po/POTFILES ++ sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ ++ < $srcdir/po/POTFILES.in > po/POTFILES ++ ++ ++GLIB_REQUIRED=2.13.0 ++GTK_REQUIRED=2.11.0 ++GDK_REQUIRED=2.11.0 ++GNOME_KEYRING_REQUIRED=0.6.0 ++LIBGNOME_REQUIRED=2.14.0 ++LIBGNOMEUI_REQUIRED=2.14.0 ++HAL_REQUIRED=0.5.8 ++DBUS_REQUIRED=0.70 ++LIBGLADE_REQUIRED=2.5.0 ++LIBNOTIFY_REQUIRED=0.4.3 ++LIBWNCK_REQUIRED=2.10.0 ++CAIRO_REQUIRED=1.0.0 ++UNIQUE_REQUIRED=0.9.4 ++LIBPANEL_REQUIRED=2.0.0 ++GSTREAMER_REQUIRED=0.10 ++XRANDR_REQUIRED=1.2.0 ++POLKIT_GNOME_REQUIRED=0.8 ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for GLIB" >&5 ++echo $ECHO_N "checking for GLIB... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GLIB_CFLAGS"; then ++ pkg_cv_GLIB_CFLAGS="$GLIB_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED gobject-2.0\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED gobject-2.0") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GLIB_CFLAGS=`$PKG_CONFIG --cflags "glib-2.0 >= $GLIB_REQUIRED gobject-2.0" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GLIB_LIBS"; then ++ pkg_cv_GLIB_LIBS="$GLIB_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED gobject-2.0\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED gobject-2.0") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GLIB_LIBS=`$PKG_CONFIG --libs "glib-2.0 >= $GLIB_REQUIRED gobject-2.0" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ GLIB_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "glib-2.0 >= $GLIB_REQUIRED gobject-2.0"` ++ else ++ GLIB_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "glib-2.0 >= $GLIB_REQUIRED gobject-2.0"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$GLIB_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements (glib-2.0 >= $GLIB_REQUIRED gobject-2.0) were not met: ++ ++$GLIB_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables GLIB_CFLAGS ++and GLIB_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (glib-2.0 >= $GLIB_REQUIRED gobject-2.0) were not met: ++ ++$GLIB_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables GLIB_CFLAGS ++and GLIB_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables GLIB_CFLAGS ++and GLIB_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables GLIB_CFLAGS ++and GLIB_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ GLIB_CFLAGS=$pkg_cv_GLIB_CFLAGS ++ GLIB_LIBS=$pkg_cv_GLIB_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for HAL" >&5 ++echo $ECHO_N "checking for HAL... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$HAL_CFLAGS"; then ++ pkg_cv_HAL_CFLAGS="$HAL_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"hal >= \$HAL_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "hal >= $HAL_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_HAL_CFLAGS=`$PKG_CONFIG --cflags "hal >= $HAL_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$HAL_LIBS"; then ++ pkg_cv_HAL_LIBS="$HAL_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"hal >= \$HAL_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "hal >= $HAL_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_HAL_LIBS=`$PKG_CONFIG --libs "hal >= $HAL_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ HAL_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "hal >= $HAL_REQUIRED"` ++ else ++ HAL_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "hal >= $HAL_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$HAL_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements (hal >= $HAL_REQUIRED) were not met: ++ ++$HAL_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables HAL_CFLAGS ++and HAL_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (hal >= $HAL_REQUIRED) were not met: ++ ++$HAL_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables HAL_CFLAGS ++and HAL_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables HAL_CFLAGS ++and HAL_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables HAL_CFLAGS ++and HAL_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ HAL_CFLAGS=$pkg_cv_HAL_CFLAGS ++ HAL_LIBS=$pkg_cv_HAL_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for GSTREAMER" >&5 ++echo $ECHO_N "checking for GSTREAMER... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GSTREAMER_CFLAGS"; then ++ pkg_cv_GSTREAMER_CFLAGS="$GSTREAMER_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gstreamer-0.10 >= \$GSTREAMER_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "gstreamer-0.10 >= $GSTREAMER_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GSTREAMER_CFLAGS=`$PKG_CONFIG --cflags "gstreamer-0.10 >= $GSTREAMER_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GSTREAMER_LIBS"; then ++ pkg_cv_GSTREAMER_LIBS="$GSTREAMER_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gstreamer-0.10 >= \$GSTREAMER_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "gstreamer-0.10 >= $GSTREAMER_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GSTREAMER_LIBS=`$PKG_CONFIG --libs "gstreamer-0.10 >= $GSTREAMER_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ GSTREAMER_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "gstreamer-0.10 >= $GSTREAMER_REQUIRED"` ++ else ++ GSTREAMER_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "gstreamer-0.10 >= $GSTREAMER_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$GSTREAMER_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements (gstreamer-0.10 >= $GSTREAMER_REQUIRED) were not met: ++ ++$GSTREAMER_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables GSTREAMER_CFLAGS ++and GSTREAMER_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (gstreamer-0.10 >= $GSTREAMER_REQUIRED) were not met: ++ ++$GSTREAMER_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables GSTREAMER_CFLAGS ++and GSTREAMER_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables GSTREAMER_CFLAGS ++and GSTREAMER_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables GSTREAMER_CFLAGS ++and GSTREAMER_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ GSTREAMER_CFLAGS=$pkg_cv_GSTREAMER_CFLAGS ++ GSTREAMER_LIBS=$pkg_cv_GSTREAMER_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for DBUS" >&5 ++echo $ECHO_N "checking for DBUS... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$DBUS_CFLAGS"; then ++ pkg_cv_DBUS_CFLAGS="$DBUS_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ dbus-glib-1 >= \$DBUS_REQUIRED ++ dbus-1 >= \$DBUS_REQUIRED ++ gthread-2.0\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_DBUS_CFLAGS=`$PKG_CONFIG --cflags " ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$DBUS_LIBS"; then ++ pkg_cv_DBUS_LIBS="$DBUS_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ dbus-glib-1 >= \$DBUS_REQUIRED ++ dbus-1 >= \$DBUS_REQUIRED ++ gthread-2.0\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_DBUS_LIBS=`$PKG_CONFIG --libs " ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ DBUS_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors " ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0"` ++ else ++ DBUS_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors " ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$DBUS_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements ( ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0) were not met: ++ ++$DBUS_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables DBUS_CFLAGS ++and DBUS_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements ( ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0) were not met: ++ ++$DBUS_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables DBUS_CFLAGS ++and DBUS_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables DBUS_CFLAGS ++and DBUS_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables DBUS_CFLAGS ++and DBUS_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ DBUS_CFLAGS=$pkg_cv_DBUS_CFLAGS ++ DBUS_LIBS=$pkg_cv_DBUS_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for GNOME" >&5 ++echo $ECHO_N "checking for GNOME... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GNOME_CFLAGS"; then ++ pkg_cv_GNOME_CFLAGS="$GNOME_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ libgnomeui-2.0 >= \$LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= \$LIBGLADE_REQUIRED ++ libwnck-1.0 >= \$LIBWNCK_REQUIRED ++ gtk+-2.0 >= \$GTK_REQUIRED ++ gnome-keyring-1 >= \$GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= \$LIBPANEL_REQUIRED ++ cairo >= \$CAIRO_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GNOME_CFLAGS=`$PKG_CONFIG --cflags " ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GNOME_LIBS"; then ++ pkg_cv_GNOME_LIBS="$GNOME_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ libgnomeui-2.0 >= \$LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= \$LIBGLADE_REQUIRED ++ libwnck-1.0 >= \$LIBWNCK_REQUIRED ++ gtk+-2.0 >= \$GTK_REQUIRED ++ gnome-keyring-1 >= \$GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= \$LIBPANEL_REQUIRED ++ cairo >= \$CAIRO_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GNOME_LIBS=`$PKG_CONFIG --libs " ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ GNOME_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors " ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED"` ++ else ++ GNOME_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors " ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$GNOME_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements ( ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED) were not met: ++ ++$GNOME_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables GNOME_CFLAGS ++and GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements ( ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED) were not met: ++ ++$GNOME_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables GNOME_CFLAGS ++and GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables GNOME_CFLAGS ++and GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables GNOME_CFLAGS ++and GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ GNOME_CFLAGS=$pkg_cv_GNOME_CFLAGS ++ GNOME_LIBS=$pkg_cv_GNOME_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for GDK" >&5 ++echo $ECHO_N "checking for GDK... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GDK_CFLAGS"; then ++ pkg_cv_GDK_CFLAGS="$GDK_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ gdk-2.0 >= \$GDK_REQUIRED ++ gdk-x11-2.0 >= \$GDK_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GDK_CFLAGS=`$PKG_CONFIG --cflags " ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GDK_LIBS"; then ++ pkg_cv_GDK_LIBS="$GDK_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ gdk-2.0 >= \$GDK_REQUIRED ++ gdk-x11-2.0 >= \$GDK_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GDK_LIBS=`$PKG_CONFIG --libs " ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ GDK_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors " ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED"` ++ else ++ GDK_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors " ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$GDK_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements ( ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED) were not met: ++ ++$GDK_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables GDK_CFLAGS ++and GDK_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements ( ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED) were not met: ++ ++$GDK_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables GDK_CFLAGS ++and GDK_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables GDK_CFLAGS ++and GDK_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables GDK_CFLAGS ++and GDK_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ GDK_CFLAGS=$pkg_cv_GDK_CFLAGS ++ GDK_LIBS=$pkg_cv_GDK_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for XRANDR" >&5 ++echo $ECHO_N "checking for XRANDR... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$XRANDR_CFLAGS"; then ++ pkg_cv_XRANDR_CFLAGS="$XRANDR_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ xrandr >= \$XRANDR_REQUIRED ++ xrender x11\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_XRANDR_CFLAGS=`$PKG_CONFIG --cflags " ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$XRANDR_LIBS"; then ++ pkg_cv_XRANDR_LIBS="$XRANDR_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ xrandr >= \$XRANDR_REQUIRED ++ xrender x11\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_XRANDR_LIBS=`$PKG_CONFIG --libs " ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ XRANDR_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors " ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11"` ++ else ++ XRANDR_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors " ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$XRANDR_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements ( ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11) were not met: ++ ++$XRANDR_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables XRANDR_CFLAGS ++and XRANDR_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements ( ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11) were not met: ++ ++$XRANDR_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables XRANDR_CFLAGS ++and XRANDR_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables XRANDR_CFLAGS ++and XRANDR_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables XRANDR_CFLAGS ++and XRANDR_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ XRANDR_CFLAGS=$pkg_cv_XRANDR_CFLAGS ++ XRANDR_LIBS=$pkg_cv_XRANDR_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ ++# Extract the first word of "gconftool-2", so it can be a program name with args. ++set dummy gconftool-2; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_GCONFTOOL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $GCONFTOOL in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_GCONFTOOL="$GCONFTOOL" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_GCONFTOOL="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++GCONFTOOL=$ac_cv_path_GCONFTOOL ++if test -n "$GCONFTOOL"; then ++ { echo "$as_me:$LINENO: result: $GCONFTOOL" >&5 ++echo "${ECHO_T}$GCONFTOOL" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ ++ if test "x$GCONF_SCHEMA_INSTALL_SOURCE" = "x"; then ++ GCONF_SCHEMA_CONFIG_SOURCE=`gconftool-2 --get-default-source` ++ else ++ GCONF_SCHEMA_CONFIG_SOURCE=$GCONF_SCHEMA_INSTALL_SOURCE ++ fi ++ ++ ++# Check whether --with-gconf-source was given. ++if test "${with_gconf_source+set}" = set; then ++ withval=$with_gconf_source; GCONF_SCHEMA_CONFIG_SOURCE="$withval" ++fi ++ ++ ++ ++ { echo "$as_me:$LINENO: result: Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation" >&5 ++echo "${ECHO_T}Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation" >&6; } ++ ++ if test "x$GCONF_SCHEMA_FILE_DIR" = "x"; then ++ GCONF_SCHEMA_FILE_DIR='$(sysconfdir)/gconf/schemas' ++ fi ++ ++ ++# Check whether --with-gconf-schema-file-dir was given. ++if test "${with_gconf_schema_file_dir+set}" = set; then ++ withval=$with_gconf_schema_file_dir; GCONF_SCHEMA_FILE_DIR="$withval" ++fi ++ ++ ++ ++ { echo "$as_me:$LINENO: result: Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files" >&5 ++echo "${ECHO_T}Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files" >&6; } ++ ++ # Check whether --enable-schemas-install was given. ++if test "${enable_schemas_install+set}" = set; then ++ enableval=$enable_schemas_install; case ${enableval} in ++ yes|no) ;; ++ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-schemas-install" >&5 ++echo "$as_me: error: bad value ${enableval} for --enable-schemas-install" >&2;} ++ { (exit 1); exit 1; }; } ;; ++ esac ++fi ++ ++ ++ ++if test "$enable_schemas_install" != no; then ++ GCONF_SCHEMAS_INSTALL_TRUE= ++ GCONF_SCHEMAS_INSTALL_FALSE='#' ++else ++ GCONF_SCHEMAS_INSTALL_TRUE='#' ++ GCONF_SCHEMAS_INSTALL_FALSE= ++fi ++ ++ ++ ++{ echo "$as_me:$LINENO: checking for X" >&5 ++echo $ECHO_N "checking for X... $ECHO_C" >&6; } ++ ++ ++# Check whether --with-x was given. ++if test "${with_x+set}" = set; then ++ withval=$with_x; ++fi ++ ++# $have_x is `yes', `no', `disabled', or empty when we do not yet know. ++if test "x$with_x" = xno; then ++ # The user explicitly disabled X. ++ have_x=disabled ++else ++ case $x_includes,$x_libraries in #( ++ *\'*) { { echo "$as_me:$LINENO: error: Cannot use X directory names containing '" >&5 ++echo "$as_me: error: Cannot use X directory names containing '" >&2;} ++ { (exit 1); exit 1; }; };; #( ++ *,NONE | NONE,*) if test "${ac_cv_have_x+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ # One or both of the vars are not set, and there is no cached value. ++ac_x_includes=no ac_x_libraries=no ++rm -f -r conftest.dir ++if mkdir conftest.dir; then ++ cd conftest.dir ++ cat >Imakefile <<'_ACEOF' ++incroot: ++ @echo incroot='${INCROOT}' ++usrlibdir: ++ @echo usrlibdir='${USRLIBDIR}' ++libdir: ++ @echo libdir='${LIBDIR}' ++_ACEOF ++ if (export CC; ${XMKMF-xmkmf}) >/dev/null 2>/dev/null && test -f Makefile; then ++ # GNU make sometimes prints "make[1]: Entering...", which would confuse us. ++ for ac_var in incroot usrlibdir libdir; do ++ eval "ac_im_$ac_var=\`\${MAKE-make} $ac_var 2>/dev/null | sed -n 's/^$ac_var=//p'\`" ++ done ++ # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. ++ for ac_extension in a so sl; do ++ if test ! -f "$ac_im_usrlibdir/libX11.$ac_extension" && ++ test -f "$ac_im_libdir/libX11.$ac_extension"; then ++ ac_im_usrlibdir=$ac_im_libdir; break ++ fi ++ done ++ # Screen out bogus values from the imake configuration. They are ++ # bogus both because they are the default anyway, and because ++ # using them would break gcc on systems where it needs fixed includes. ++ case $ac_im_incroot in ++ /usr/include) ac_x_includes= ;; ++ *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;; ++ esac ++ case $ac_im_usrlibdir in ++ /usr/lib | /lib) ;; ++ *) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;; ++ esac ++ fi ++ cd .. ++ rm -f -r conftest.dir ++fi ++ ++# Standard set of common directories for X headers. ++# Check X11 before X11Rn because it is often a symlink to the current release. ++ac_x_header_dirs=' ++/usr/X11/include ++/usr/X11R6/include ++/usr/X11R5/include ++/usr/X11R4/include ++ ++/usr/include/X11 ++/usr/include/X11R6 ++/usr/include/X11R5 ++/usr/include/X11R4 ++ ++/usr/local/X11/include ++/usr/local/X11R6/include ++/usr/local/X11R5/include ++/usr/local/X11R4/include ++ ++/usr/local/include/X11 ++/usr/local/include/X11R6 ++/usr/local/include/X11R5 ++/usr/local/include/X11R4 ++ ++/usr/X386/include ++/usr/x386/include ++/usr/XFree86/include/X11 ++ ++/usr/include ++/usr/local/include ++/usr/unsupported/include ++/usr/athena/include ++/usr/local/x11r5/include ++/usr/lpp/Xamples/include ++ ++/usr/openwin/include ++/usr/openwin/share/include' ++ ++if test "$ac_x_includes" = no; then ++ # Guess where to find include files, by looking for Xlib.h. ++ # First, try using that file with no special directory specified. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++@%:@include ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ # We can compile using X headers with no special include directory. ++ac_x_includes= ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ for ac_dir in $ac_x_header_dirs; do ++ if test -r "$ac_dir/X11/Xlib.h"; then ++ ac_x_includes=$ac_dir ++ break ++ fi ++done ++fi ++ ++rm -f conftest.err conftest.$ac_ext ++fi # $ac_x_includes = no ++ ++if test "$ac_x_libraries" = no; then ++ # Check for the libraries. ++ # See if we find them without any special options. ++ # Don't add to $LIBS permanently. ++ ac_save_LIBS=$LIBS ++ LIBS="-lX11 $LIBS" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++@%:@include ++int ++main () ++{ ++XrmInitialize () ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ LIBS=$ac_save_LIBS ++# We can link X programs with no special library path. ++ac_x_libraries= ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ LIBS=$ac_save_LIBS ++for ac_dir in `echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g` ++do ++ # Don't even attempt the hair of trying to link an X program! ++ for ac_extension in a so sl; do ++ if test -r "$ac_dir/libX11.$ac_extension"; then ++ ac_x_libraries=$ac_dir ++ break 2 ++ fi ++ done ++done ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi # $ac_x_libraries = no ++ ++case $ac_x_includes,$ac_x_libraries in #( ++ no,* | *,no | *\'*) ++ # Didn't find X, or a directory has "'" in its name. ++ ac_cv_have_x="have_x=no";; #( ++ *) ++ # Record where we found X for the cache. ++ ac_cv_have_x="have_x=yes\ ++ ac_x_includes='$ac_x_includes'\ ++ ac_x_libraries='$ac_x_libraries'" ++esac ++fi ++;; #( ++ *) have_x=yes;; ++ esac ++ eval "$ac_cv_have_x" ++fi # $with_x != no ++ ++if test "$have_x" != yes; then ++ { echo "$as_me:$LINENO: result: $have_x" >&5 ++echo "${ECHO_T}$have_x" >&6; } ++ no_x=yes ++else ++ # If each of the values was on the command line, it overrides each guess. ++ test "x$x_includes" = xNONE && x_includes=$ac_x_includes ++ test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries ++ # Update the cache value to reflect the command line values. ++ ac_cv_have_x="have_x=yes\ ++ ac_x_includes='$x_includes'\ ++ ac_x_libraries='$x_libraries'" ++ { echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5 ++echo "${ECHO_T}libraries $x_libraries, headers $x_includes" >&6; } ++fi ++ ++if test "$no_x" = yes; then ++ # Not all programs may use this symbol, but it does not hurt to define it. ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define X_DISPLAY_MISSING 1 ++_ACEOF ++ ++ X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS= ++else ++ if test -n "$x_includes"; then ++ X_CFLAGS="$X_CFLAGS -I$x_includes" ++ fi ++ ++ # It would also be nice to do this for all -L options, not just this one. ++ if test -n "$x_libraries"; then ++ X_LIBS="$X_LIBS -L$x_libraries" ++ # For Solaris; some versions of Sun CC require a space after -R and ++ # others require no space. Words are not sufficient . . . . ++ { echo "$as_me:$LINENO: checking whether -R must be followed by a space" >&5 ++echo $ECHO_N "checking whether -R must be followed by a space... $ECHO_C" >&6; } ++ ac_xsave_LIBS=$LIBS; LIBS="$LIBS -R$x_libraries" ++ ac_xsave_c_werror_flag=$ac_c_werror_flag ++ ac_c_werror_flag=yes ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ X_LIBS="$X_LIBS -R$x_libraries" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ LIBS="$ac_xsave_LIBS -R $x_libraries" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ X_LIBS="$X_LIBS -R $x_libraries" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ { echo "$as_me:$LINENO: result: neither works" >&5 ++echo "${ECHO_T}neither works" >&6; } ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ ac_c_werror_flag=$ac_xsave_c_werror_flag ++ LIBS=$ac_xsave_LIBS ++ fi ++ ++ # Check for system-dependent libraries X programs must link with. ++ # Do this before checking for the system-independent R6 libraries ++ # (-lICE), since we may need -lsocket or whatever for X linking. ++ ++ if test "$ISC" = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet" ++ else ++ # Martyn Johnson says this is needed for Ultrix, if the X ++ # libraries were built with DECnet support. And Karl Berry says ++ # the Alpha needs dnet_stub (dnet does not exist). ++ ac_xsave_LIBS="$LIBS"; LIBS="$LIBS $X_LIBS -lX11" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char XOpenDisplay (); ++int ++main () ++{ ++return XOpenDisplay (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ : ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ { echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet" >&5 ++echo $ECHO_N "checking for dnet_ntoa in -ldnet... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dnet_dnet_ntoa+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldnet $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dnet_ntoa (); ++int ++main () ++{ ++return dnet_ntoa (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dnet_dnet_ntoa=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_dnet_dnet_ntoa=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_dnet_ntoa" >&5 ++echo "${ECHO_T}$ac_cv_lib_dnet_dnet_ntoa" >&6; } ++if test $ac_cv_lib_dnet_dnet_ntoa = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet" ++fi ++ ++ if test $ac_cv_lib_dnet_dnet_ntoa = no; then ++ { echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet_stub" >&5 ++echo $ECHO_N "checking for dnet_ntoa in -ldnet_stub... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dnet_stub_dnet_ntoa+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldnet_stub $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dnet_ntoa (); ++int ++main () ++{ ++return dnet_ntoa (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dnet_stub_dnet_ntoa=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_dnet_stub_dnet_ntoa=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5 ++echo "${ECHO_T}$ac_cv_lib_dnet_stub_dnet_ntoa" >&6; } ++if test $ac_cv_lib_dnet_stub_dnet_ntoa = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub" ++fi ++ ++ fi ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ LIBS="$ac_xsave_LIBS" ++ ++ # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT, ++ # to get the SysV transport functions. ++ # Chad R. Larson says the Pyramis MIS-ES running DC/OSx (SVR4) ++ # needs -lnsl. ++ # The nsl library prevents programs from opening the X display ++ # on Irix 5.2, according to T.E. Dickey. ++ # The functions gethostbyname, getservbyname, and inet_addr are ++ # in -lbsd on LynxOS 3.0.1/i386, according to Lars Hecking. ++ { echo "$as_me:$LINENO: checking for gethostbyname" >&5 ++echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6; } ++if test "${ac_cv_func_gethostbyname+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define gethostbyname to an innocuous variant, in case declares gethostbyname. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define gethostbyname innocuous_gethostbyname ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char gethostbyname (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef gethostbyname ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char gethostbyname (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_gethostbyname || defined __stub___gethostbyname ++choke me ++#endif ++ ++int ++main () ++{ ++return gethostbyname (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_gethostbyname=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_func_gethostbyname=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5 ++echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6; } ++ ++ if test $ac_cv_func_gethostbyname = no; then ++ { echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 ++echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lnsl $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char gethostbyname (); ++int ++main () ++{ ++return gethostbyname (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_nsl_gethostbyname=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_nsl_gethostbyname=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5 ++echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6; } ++if test $ac_cv_lib_nsl_gethostbyname = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl" ++fi ++ ++ if test $ac_cv_lib_nsl_gethostbyname = no; then ++ { echo "$as_me:$LINENO: checking for gethostbyname in -lbsd" >&5 ++echo $ECHO_N "checking for gethostbyname in -lbsd... $ECHO_C" >&6; } ++if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lbsd $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char gethostbyname (); ++int ++main () ++{ ++return gethostbyname (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_bsd_gethostbyname=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_bsd_gethostbyname=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_gethostbyname" >&5 ++echo "${ECHO_T}$ac_cv_lib_bsd_gethostbyname" >&6; } ++if test $ac_cv_lib_bsd_gethostbyname = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -lbsd" ++fi ++ ++ fi ++ fi ++ ++ # lieder@skyler.mavd.honeywell.com says without -lsocket, ++ # socket/setsockopt and other routines are undefined under SCO ODT ++ # 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary ++ # on later versions), says Simon Leinen: it contains gethostby* ++ # variants that don't use the name server (or something). -lsocket ++ # must be given before -lnsl if both are needed. We assume that ++ # if connect needs -lnsl, so does gethostbyname. ++ { echo "$as_me:$LINENO: checking for connect" >&5 ++echo $ECHO_N "checking for connect... $ECHO_C" >&6; } ++if test "${ac_cv_func_connect+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define connect to an innocuous variant, in case declares connect. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define connect innocuous_connect ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char connect (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef connect ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char connect (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_connect || defined __stub___connect ++choke me ++#endif ++ ++int ++main () ++{ ++return connect (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_connect=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_func_connect=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5 ++echo "${ECHO_T}$ac_cv_func_connect" >&6; } ++ ++ if test $ac_cv_func_connect = no; then ++ { echo "$as_me:$LINENO: checking for connect in -lsocket" >&5 ++echo $ECHO_N "checking for connect in -lsocket... $ECHO_C" >&6; } ++if test "${ac_cv_lib_socket_connect+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lsocket $X_EXTRA_LIBS $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char connect (); ++int ++main () ++{ ++return connect (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_socket_connect=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_socket_connect=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_socket_connect" >&5 ++echo "${ECHO_T}$ac_cv_lib_socket_connect" >&6; } ++if test $ac_cv_lib_socket_connect = yes; then ++ X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS" ++fi ++ ++ fi ++ ++ # Guillermo Gomez says -lposix is necessary on A/UX. ++ { echo "$as_me:$LINENO: checking for remove" >&5 ++echo $ECHO_N "checking for remove... $ECHO_C" >&6; } ++if test "${ac_cv_func_remove+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define remove to an innocuous variant, in case declares remove. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define remove innocuous_remove ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char remove (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef remove ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char remove (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_remove || defined __stub___remove ++choke me ++#endif ++ ++int ++main () ++{ ++return remove (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_remove=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_func_remove=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_remove" >&5 ++echo "${ECHO_T}$ac_cv_func_remove" >&6; } ++ ++ if test $ac_cv_func_remove = no; then ++ { echo "$as_me:$LINENO: checking for remove in -lposix" >&5 ++echo $ECHO_N "checking for remove in -lposix... $ECHO_C" >&6; } ++if test "${ac_cv_lib_posix_remove+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lposix $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char remove (); ++int ++main () ++{ ++return remove (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_posix_remove=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_posix_remove=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_posix_remove" >&5 ++echo "${ECHO_T}$ac_cv_lib_posix_remove" >&6; } ++if test $ac_cv_lib_posix_remove = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix" ++fi ++ ++ fi ++ ++ # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. ++ { echo "$as_me:$LINENO: checking for shmat" >&5 ++echo $ECHO_N "checking for shmat... $ECHO_C" >&6; } ++if test "${ac_cv_func_shmat+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define shmat to an innocuous variant, in case declares shmat. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define shmat innocuous_shmat ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char shmat (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef shmat ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char shmat (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_shmat || defined __stub___shmat ++choke me ++#endif ++ ++int ++main () ++{ ++return shmat (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_shmat=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_func_shmat=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_shmat" >&5 ++echo "${ECHO_T}$ac_cv_func_shmat" >&6; } ++ ++ if test $ac_cv_func_shmat = no; then ++ { echo "$as_me:$LINENO: checking for shmat in -lipc" >&5 ++echo $ECHO_N "checking for shmat in -lipc... $ECHO_C" >&6; } ++if test "${ac_cv_lib_ipc_shmat+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lipc $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char shmat (); ++int ++main () ++{ ++return shmat (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_ipc_shmat=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_ipc_shmat=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_ipc_shmat" >&5 ++echo "${ECHO_T}$ac_cv_lib_ipc_shmat" >&6; } ++if test $ac_cv_lib_ipc_shmat = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc" ++fi ++ ++ fi ++ fi ++ ++ # Check for libraries that X11R6 Xt/Xaw programs need. ++ ac_save_LDFLAGS=$LDFLAGS ++ test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries" ++ # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to ++ # check for ICE first), but we must link in the order -lSM -lICE or ++ # we get undefined symbols. So assume we have SM if we have ICE. ++ # These have to be linked with before -lX11, unlike the other ++ # libraries we check for below, so use a different variable. ++ # John Interrante, Karl Berry ++ { echo "$as_me:$LINENO: checking for IceConnectionNumber in -lICE" >&5 ++echo $ECHO_N "checking for IceConnectionNumber in -lICE... $ECHO_C" >&6; } ++if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lICE $X_EXTRA_LIBS $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char IceConnectionNumber (); ++int ++main () ++{ ++return IceConnectionNumber (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_ICE_IceConnectionNumber=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_ICE_IceConnectionNumber=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5 ++echo "${ECHO_T}$ac_cv_lib_ICE_IceConnectionNumber" >&6; } ++if test $ac_cv_lib_ICE_IceConnectionNumber = yes; then ++ X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE" ++fi ++ ++ LDFLAGS=$ac_save_LDFLAGS ++ ++fi ++ ++ ++ALL_X_LIBS="$X_LIBS $X_PRE_LIBS -lX11 $X_EXTRA_LIBS" ++ ++SYSCONFDIR=$sysconfdir ++ ++DATADIR=$datadir ++ ++BINDIR=$bindir ++ ++SBINDIR=$sbindir ++ ++ ++ ++# Check whether --with-doc-dir was given. ++if test "${with_doc_dir+set}" = set; then ++ withval=$with_doc_dir; ++fi ++ ++ ++if ! test -z "$with_doc_dir"; then ++ DOCDIR="$with_doc_dir/gnome-power-manager-$VERSION" ++else ++ DOCDIR="$DATADIR/doc/gnome-power-manager-$VERSION" ++fi ++ ++ ++# Check whether --enable-policykit was given. ++if test "${enable_policykit+set}" = set; then ++ enableval=$enable_policykit; enable_policykit=$enableval ++else ++ enable_policykit=no ++fi ++ ++ ++{ echo "$as_me:$LINENO: checking whether to support PolicyKit" >&5 ++echo $ECHO_N "checking whether to support PolicyKit... $ECHO_C" >&6; } ++have_polkit=no ++if test x$enable_policykit = xyes ; then ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for POLKIT" >&5 ++echo $ECHO_N "checking for POLKIT... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$POLKIT_CFLAGS"; then ++ pkg_cv_POLKIT_CFLAGS="$POLKIT_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\\ ++ polkit-grant >= \$POLKIT_GNOME_REQUIRED\\ ++ polkit-dbus >= \$POLKIT_GNOME_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_POLKIT_CFLAGS=`$PKG_CONFIG --cflags "\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$POLKIT_LIBS"; then ++ pkg_cv_POLKIT_LIBS="$POLKIT_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\\ ++ polkit-grant >= \$POLKIT_GNOME_REQUIRED\\ ++ polkit-dbus >= \$POLKIT_GNOME_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_POLKIT_LIBS=`$PKG_CONFIG --libs "\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ POLKIT_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED"` ++ else ++ POLKIT_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$POLKIT_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements (\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED) were not met: ++ ++$POLKIT_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables POLKIT_CFLAGS ++and POLKIT_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED) were not met: ++ ++$POLKIT_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables POLKIT_CFLAGS ++and POLKIT_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables POLKIT_CFLAGS ++and POLKIT_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables POLKIT_CFLAGS ++and POLKIT_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ POLKIT_CFLAGS=$pkg_cv_POLKIT_CFLAGS ++ POLKIT_LIBS=$pkg_cv_POLKIT_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ have_polkit=yes ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_POLKIT 1 ++_ACEOF ++ ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++# Check whether --enable-checkfg was given. ++if test "${enable_checkfg+set}" = set; then ++ enableval=$enable_checkfg; enable_checkfg=$enableval ++else ++ enable_checkfg=no ++fi ++ ++ ++{ echo "$as_me:$LINENO: checking whether to use check-foreground-console" >&5 ++echo $ECHO_N "checking whether to use check-foreground-console... $ECHO_C" >&6; } ++have_checkfg=no ++if test x$enable_checkfg = xyes ; then ++ have_checkfg=yes ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_CHECK_FG 1 ++_ACEOF ++ ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++# Check whether --enable-xevents was given. ++if test "${enable_xevents+set}" = set; then ++ enableval=$enable_xevents; enable_xevents=$enableval ++else ++ enable_xevents=yes ++fi ++ ++ ++{ echo "$as_me:$LINENO: checking whether to support xevents" >&5 ++echo $ECHO_N "checking whether to support xevents... $ECHO_C" >&6; } ++have_xevents=no ++if test x$enable_xevents = xyes ; then ++ have_xevents=yes ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_XEVENTS 1 ++_ACEOF ++ ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++# Check whether --enable-tests was given. ++if test "${enable_tests+set}" = set; then ++ enableval=$enable_tests; enable_tests=$enableval ++else ++ enable_tests=no ++fi ++ ++ ++{ echo "$as_me:$LINENO: checking whether to support tests" >&5 ++echo $ECHO_N "checking whether to support tests... $ECHO_C" >&6; } ++have_tests=no ++if test x$enable_tests = xyes ; then ++ have_tests=yes ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_TESTS 1 ++_ACEOF ++ ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++if test $have_tests = yes; then ++ HAVE_TESTS_TRUE= ++ HAVE_TESTS_FALSE='#' ++else ++ HAVE_TESTS_TRUE='#' ++ HAVE_TESTS_FALSE= ++fi ++ ++ ++# Check whether --enable-gconf-defaults was given. ++if test "${enable_gconf_defaults+set}" = set; then ++ enableval=$enable_gconf_defaults; enable_gconfdefaults=$enableval ++else ++ enable_gconfdefaults=yes ++fi ++ ++ ++{ echo "$as_me:$LINENO: checking whether to support gconf defaults" >&5 ++echo $ECHO_N "checking whether to support gconf defaults... $ECHO_C" >&6; } ++have_gconfdefaults=no ++if test x$enable_gconfdefaults = xyes ; then ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for POLKIT_GNOME" >&5 ++echo $ECHO_N "checking for POLKIT_GNOME... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$POLKIT_GNOME_CFLAGS"; then ++ pkg_cv_POLKIT_GNOME_CFLAGS="$POLKIT_GNOME_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ polkit-gnome >= \$POLKIT_GNOME_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_POLKIT_GNOME_CFLAGS=`$PKG_CONFIG --cflags " ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$POLKIT_GNOME_LIBS"; then ++ pkg_cv_POLKIT_GNOME_LIBS="$POLKIT_GNOME_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ polkit-gnome >= \$POLKIT_GNOME_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_POLKIT_GNOME_LIBS=`$PKG_CONFIG --libs " ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ POLKIT_GNOME_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors " ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED"` ++ else ++ POLKIT_GNOME_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors " ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$POLKIT_GNOME_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements ( ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED) were not met: ++ ++$POLKIT_GNOME_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables POLKIT_GNOME_CFLAGS ++and POLKIT_GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements ( ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED) were not met: ++ ++$POLKIT_GNOME_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables POLKIT_GNOME_CFLAGS ++and POLKIT_GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables POLKIT_GNOME_CFLAGS ++and POLKIT_GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables POLKIT_GNOME_CFLAGS ++and POLKIT_GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ POLKIT_GNOME_CFLAGS=$pkg_cv_POLKIT_GNOME_CFLAGS ++ POLKIT_GNOME_LIBS=$pkg_cv_POLKIT_GNOME_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ have_gconfdefaults=yes ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_GCONF_DEFAULTS 1 ++_ACEOF ++ ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++if test $have_gconfdefaults = yes; then ++ HAVE_GCONF_DEFAULTS_TRUE= ++ HAVE_GCONF_DEFAULTS_FALSE='#' ++else ++ HAVE_GCONF_DEFAULTS_TRUE='#' ++ HAVE_GCONF_DEFAULTS_FALSE= ++fi ++ ++ ++# Check whether --enable-applets was given. ++if test "${enable_applets+set}" = set; then ++ enableval=$enable_applets; enable_applets=$enableval ++else ++ enable_applets=yes ++fi ++ ++ ++{ echo "$as_me:$LINENO: checking whether to build applet support" >&5 ++echo $ECHO_N "checking whether to build applet support... $ECHO_C" >&6; } ++have_applets=no ++if test x$enable_applets = xyes ; then ++ have_applets=yes ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_APPLETS 1 ++_ACEOF ++ ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++if test $have_applets = yes; then ++ HAVE_APPLETS_TRUE= ++ HAVE_APPLETS_FALSE='#' ++else ++ HAVE_APPLETS_TRUE='#' ++ HAVE_APPLETS_FALSE= ++fi ++ ++ ++# Check whether --enable-docbook-docs was given. ++if test "${enable_docbook_docs+set}" = set; then ++ enableval=$enable_docbook_docs; enable_docbook_docs=$enableval ++else ++ enable_docbook_docs=auto ++fi ++ ++ ++# Extract the first word of "xmlto", so it can be a program name with args. ++set dummy xmlto; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_XMLTO+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $XMLTO in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_XMLTO="$XMLTO" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_XMLTO="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ test -z "$ac_cv_path_XMLTO" && ac_cv_path_XMLTO="no" ++ ;; ++esac ++fi ++XMLTO=$ac_cv_path_XMLTO ++if test -n "$XMLTO"; then ++ { echo "$as_me:$LINENO: result: $XMLTO" >&5 ++echo "${ECHO_T}$XMLTO" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++{ echo "$as_me:$LINENO: checking whether to build DocBook documentation" >&5 ++echo $ECHO_N "checking whether to build DocBook documentation... $ECHO_C" >&6; } ++if test x$XMLTO = xno ; then ++ have_docbook=no ++else ++ have_docbook=yes ++fi ++if test x$enable_docbook_docs = xauto ; then ++ if test x$have_docbook = xno ; then ++ enable_docbook_docs=no ++ else ++ enable_docbook_docs=yes ++ fi ++fi ++if test x$enable_docbook_docs = xyes; then ++ if test x$have_docbook = xno; then ++ { { echo "$as_me:$LINENO: error: Building DocBook docs explicitly required, but DocBook not found" >&5 ++echo "$as_me: error: Building DocBook docs explicitly required, but DocBook not found" >&2;} ++ { (exit 1); exit 1; }; } ++ fi ++fi ++ ++ ++if test x$enable_docbook_docs = xyes; then ++ DOCBOOK_DOCS_ENABLED_TRUE= ++ DOCBOOK_DOCS_ENABLED_FALSE='#' ++else ++ DOCBOOK_DOCS_ENABLED_TRUE='#' ++ DOCBOOK_DOCS_ENABLED_FALSE= ++fi ++ ++{ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ ++ ++# Check whether --with-dbus-services was given. ++if test "${with_dbus_services+set}" = set; then ++ withval=$with_dbus_services; ++fi ++ ++ ++if ! test -z "$with_dbus_services" ; then ++ DBUS_SERVICES_DIR="$with_dbus_services" ++else ++ # D-BUS 0.23 and higher use $prefix/share/dbus-1/services ++ DBUS_SERVICES_DIR="$DATADIR/dbus-1/services" ++fi ++ ++ ++if $PKG_CONFIG --atleast-version $LIBNOTIFY_REQUIRED libnotify; then ++ have_libnotify=yes ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for LIBNOTIFY" >&5 ++echo $ECHO_N "checking for LIBNOTIFY... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$LIBNOTIFY_CFLAGS"; then ++ pkg_cv_LIBNOTIFY_CFLAGS="$LIBNOTIFY_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libnotify >= \$LIBNOTIFY_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "libnotify >= $LIBNOTIFY_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_LIBNOTIFY_CFLAGS=`$PKG_CONFIG --cflags "libnotify >= $LIBNOTIFY_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$LIBNOTIFY_LIBS"; then ++ pkg_cv_LIBNOTIFY_LIBS="$LIBNOTIFY_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libnotify >= \$LIBNOTIFY_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "libnotify >= $LIBNOTIFY_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_LIBNOTIFY_LIBS=`$PKG_CONFIG --libs "libnotify >= $LIBNOTIFY_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ LIBNOTIFY_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "libnotify >= $LIBNOTIFY_REQUIRED"` ++ else ++ LIBNOTIFY_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libnotify >= $LIBNOTIFY_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$LIBNOTIFY_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements (libnotify >= $LIBNOTIFY_REQUIRED) were not met: ++ ++$LIBNOTIFY_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables LIBNOTIFY_CFLAGS ++and LIBNOTIFY_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (libnotify >= $LIBNOTIFY_REQUIRED) were not met: ++ ++$LIBNOTIFY_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables LIBNOTIFY_CFLAGS ++and LIBNOTIFY_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables LIBNOTIFY_CFLAGS ++and LIBNOTIFY_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables LIBNOTIFY_CFLAGS ++and LIBNOTIFY_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ LIBNOTIFY_CFLAGS=$pkg_cv_LIBNOTIFY_CFLAGS ++ LIBNOTIFY_LIBS=$pkg_cv_LIBNOTIFY_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_LIBNOTIFY 1 ++_ACEOF ++ ++else ++ have_libnotify=no ++fi ++ ++ ++if test $have_libnotify = yes; then ++ HAVE_LIBNOTIFY_TRUE= ++ HAVE_LIBNOTIFY_FALSE='#' ++else ++ HAVE_LIBNOTIFY_TRUE='#' ++ HAVE_LIBNOTIFY_FALSE= ++fi ++ ++ ++if $PKG_CONFIG --atleast-version $UNIQUE_REQUIRED unique-1.0; then ++ have_unique=yes ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for UNIQUE" >&5 ++echo $ECHO_N "checking for UNIQUE... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$UNIQUE_CFLAGS"; then ++ pkg_cv_UNIQUE_CFLAGS="$UNIQUE_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"unique-1.0 >= \$UNIQUE_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "unique-1.0 >= $UNIQUE_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_UNIQUE_CFLAGS=`$PKG_CONFIG --cflags "unique-1.0 >= $UNIQUE_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$UNIQUE_LIBS"; then ++ pkg_cv_UNIQUE_LIBS="$UNIQUE_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"unique-1.0 >= \$UNIQUE_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "unique-1.0 >= $UNIQUE_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_UNIQUE_LIBS=`$PKG_CONFIG --libs "unique-1.0 >= $UNIQUE_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ UNIQUE_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "unique-1.0 >= $UNIQUE_REQUIRED"` ++ else ++ UNIQUE_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "unique-1.0 >= $UNIQUE_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$UNIQUE_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements (unique-1.0 >= $UNIQUE_REQUIRED) were not met: ++ ++$UNIQUE_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables UNIQUE_CFLAGS ++and UNIQUE_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (unique-1.0 >= $UNIQUE_REQUIRED) were not met: ++ ++$UNIQUE_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables UNIQUE_CFLAGS ++and UNIQUE_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables UNIQUE_CFLAGS ++and UNIQUE_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables UNIQUE_CFLAGS ++and UNIQUE_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ UNIQUE_CFLAGS=$pkg_cv_UNIQUE_CFLAGS ++ UNIQUE_LIBS=$pkg_cv_UNIQUE_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_UNIQUE 1 ++_ACEOF ++ ++else ++ have_unique=no ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_UNIQUE 0 ++_ACEOF ++ ++fi ++ ++ ++if test $have_unique = yes; then ++ HAVE_UNIQUE_TRUE= ++ HAVE_UNIQUE_FALSE='#' ++else ++ HAVE_UNIQUE_TRUE='#' ++ HAVE_UNIQUE_FALSE= ++fi ++ ++ ++ ++# Like AC_CHECK_HEADER, but it uses the already-computed -I directories. ++# ++ ++ ++# Like AC_TRY_COMPILE, but it uses the already-computed -I directories. ++# ++ ++ ++ ++# Like AC_CHECK_LIB, but it uses the already-computed -I and -L directories. ++# Use this sparingly; it probably doesn't work very well on X programs. ++# ++ ++ ++ ++# Usage: HANDLE_X_PATH_ARG([variable_name], ++# [--command-line-option], ++# [descriptive string]) ++# ++# All of the --with options take three forms: ++# ++# --with-foo (or --with-foo=yes) ++# --without-foo (or --with-foo=no) ++# --with-foo=/DIR ++# ++# This function, HANDLE_X_PATH_ARG, deals with the /DIR case. When it sees ++# a directory (string beginning with a slash) it checks to see whether ++# /DIR/include and /DIR/lib exist, and adds them to $X_CFLAGS and $X_LIBS ++# as appropriate. ++# ++ ++ ++ ++ ++have_dpms=no ++with_dpms_req=unspecified ++GPM_EXTRA_LIBS="-lresolv" ++ ++ ++# Check whether --with-dpms-ext was given. ++if test "${with_dpms_ext+set}" = set; then ++ withval=$with_dpms_ext; with_dpms="$withval"; with_dpms_req="$withval" ++else ++ with_dpms=yes ++fi ++ ++ ++ ++ case "$with_dpms" in ++ yes) ;; ++ no) ;; ++ ++ /*) ++ { echo "$as_me:$LINENO: checking for DPMS headers" >&5 ++echo $ECHO_N "checking for DPMS headers... $ECHO_C" >&6; } ++ d=$with_dpms/include ++ if test -d $d; then ++ X_CFLAGS="-I$d $X_CFLAGS" ++ { echo "$as_me:$LINENO: result: $d" >&5 ++echo "${ECHO_T}$d" >&6; } ++ else ++ { echo "$as_me:$LINENO: result: not found ($d: no such directory)" >&5 ++echo "${ECHO_T}not found ($d: no such directory)" >&6; } ++ fi ++ ++ { echo "$as_me:$LINENO: checking for DPMS libs" >&5 ++echo $ECHO_N "checking for DPMS libs... $ECHO_C" >&6; } ++ d=$with_dpms/lib ++ if test -d $d; then ++ X_LIBS="-L$d $X_LIBS" ++ { echo "$as_me:$LINENO: result: $d" >&5 ++echo "${ECHO_T}$d" >&6; } ++ else ++ { echo "$as_me:$LINENO: result: not found ($d: no such directory)" >&5 ++echo "${ECHO_T}not found ($d: no such directory)" >&6; } ++ fi ++ ++ # replace the directory string with "yes". ++ with_dpms_req="yes" ++ with_dpms=$with_dpms_req ++ ;; ++ ++ *) ++ echo "" ++ echo "error: argument to --with-dpms-ext must be \"yes\", \"no\", or a directory." ++ echo " If it is a directory, then \`DIR/include' will be added to" ++ echo " the -I list, and \`DIR/lib' will be added to the -L list." ++ exit 1 ++ ;; ++ esac ++ ++ ++if test "$with_dpms" = yes; then ++ ++ # first check for dpms.h ++ ++ ac_save_CPPFLAGS="$CPPFLAGS" ++ if test \! -z "$includedir" ; then ++ CPPFLAGS="$CPPFLAGS -I$includedir" ++ fi ++ CPPFLAGS="$CPPFLAGS $X_CFLAGS" ++ { echo "$as_me:$LINENO: checking for X11/extensions/dpms.h" >&5 ++echo $ECHO_N "checking for X11/extensions/dpms.h... $ECHO_C" >&6; } ++if test "${ac_cv_header_X11_extensions_dpms_h+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++ #include ++ ++@%:@include ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_header_X11_extensions_dpms_h=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_header_X11_extensions_dpms_h=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_header_X11_extensions_dpms_h" >&5 ++echo "${ECHO_T}$ac_cv_header_X11_extensions_dpms_h" >&6; } ++if test $ac_cv_header_X11_extensions_dpms_h = yes; then ++ have_dpms=yes ++fi ++ ++ ++ CPPFLAGS="$ac_save_CPPFLAGS" ++ ++ # if that succeeded, then check for the DPMS code in the libraries ++ if test "$have_dpms" = yes; then ++ ++ # first look in -lXext (this is where it is with XFree86 4.0) ++ have_dpms=no ++ ++ ac_save_CPPFLAGS="$CPPFLAGS" ++ ac_save_LDFLAGS="$LDFLAGS" ++# ac_save_LIBS="$LIBS" ++ ++ if test \! -z "$includedir" ; then ++ CPPFLAGS="$CPPFLAGS -I$includedir" ++ fi ++ # note: $X_CFLAGS includes $x_includes ++ CPPFLAGS="$CPPFLAGS $X_CFLAGS" ++ ++ if test \! -z "$libdir" ; then ++ LDFLAGS="$LDFLAGS -L$libdir" ++ fi ++ # note: $X_LIBS includes $x_libraries ++ LDFLAGS="$LDFLAGS $ALL_X_LIBS" ++ ++ { echo "$as_me:$LINENO: checking for DPMSInfo in -lXext" >&5 ++echo $ECHO_N "checking for DPMSInfo in -lXext... $ECHO_C" >&6; } ++if test "${ac_cv_lib_Xext_DPMSInfo+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lXext -lXext -lX11 $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char DPMSInfo (); ++int ++main () ++{ ++return DPMSInfo (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_Xext_DPMSInfo=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_Xext_DPMSInfo=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_Xext_DPMSInfo" >&5 ++echo "${ECHO_T}$ac_cv_lib_Xext_DPMSInfo" >&6; } ++if test $ac_cv_lib_Xext_DPMSInfo = yes; then ++ have_dpms=yes ++else ++ true ++fi ++ ++ CPPFLAGS="$ac_save_CPPFLAGS" ++ LDFLAGS="$ac_save_LDFLAGS" ++# LIBS="$ac_save_LIBS" ++ ++ ++ # if that failed, look in -lXdpms (this is where it was in XFree86 3.x) ++ if test "$have_dpms" = no; then ++ ++ ac_save_CPPFLAGS="$CPPFLAGS" ++ ac_save_LDFLAGS="$LDFLAGS" ++# ac_save_LIBS="$LIBS" ++ ++ if test \! -z "$includedir" ; then ++ CPPFLAGS="$CPPFLAGS -I$includedir" ++ fi ++ # note: $X_CFLAGS includes $x_includes ++ CPPFLAGS="$CPPFLAGS $X_CFLAGS" ++ ++ if test \! -z "$libdir" ; then ++ LDFLAGS="$LDFLAGS -L$libdir" ++ fi ++ # note: $X_LIBS includes $x_libraries ++ LDFLAGS="$LDFLAGS $ALL_X_LIBS" ++ ++ { echo "$as_me:$LINENO: checking for DPMSInfo in -lXdpms" >&5 ++echo $ECHO_N "checking for DPMSInfo in -lXdpms... $ECHO_C" >&6; } ++if test "${ac_cv_lib_Xdpms_DPMSInfo+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lXdpms -lXext -lX11 $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char DPMSInfo (); ++int ++main () ++{ ++return DPMSInfo (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_Xdpms_DPMSInfo=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_Xdpms_DPMSInfo=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_Xdpms_DPMSInfo" >&5 ++echo "${ECHO_T}$ac_cv_lib_Xdpms_DPMSInfo" >&6; } ++if test $ac_cv_lib_Xdpms_DPMSInfo = yes; then ++ have_dpms=yes; XDPMS_LIBS="-lXdpms" ++else ++ true ++fi ++ ++ CPPFLAGS="$ac_save_CPPFLAGS" ++ LDFLAGS="$ac_save_LDFLAGS" ++# LIBS="$ac_save_LIBS" ++ ++ fi ++ fi ++ ++ ++ # if that succeeded, then we've really got it. ++ if test "$have_dpms" = yes; then ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_DPMS_EXTENSION 1 ++_ACEOF ++ ++ GPM_EXTRA_LIBS="$GPM_EXTRA_LIBS -lXext" ++ fi ++ ++elif test "$with_dpms" != no; then ++ echo "error: must be yes or no: --with-dpms-ext=$with_dpms" ++ exit 1 ++fi ++ ++{ echo "$as_me:$LINENO: checking for Solaris kstat" >&5 ++echo $ECHO_N "checking for Solaris kstat... $ECHO_C" >&6; } ++{ echo "$as_me:$LINENO: checking for kstat_open in -lkstat" >&5 ++echo $ECHO_N "checking for kstat_open in -lkstat... $ECHO_C" >&6; } ++if test "${ac_cv_lib_kstat_kstat_open+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lkstat $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char kstat_open (); ++int ++main () ++{ ++return kstat_open (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_kstat_kstat_open=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_kstat_kstat_open=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_kstat_kstat_open" >&5 ++echo "${ECHO_T}$ac_cv_lib_kstat_kstat_open" >&6; } ++if test $ac_cv_lib_kstat_kstat_open = yes; then ++ ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_KSTAT 1 ++_ACEOF ++ ++ GPM_EXTRA_LIBS="$GPM_EXTRA_LIBS -lkstat" ++ ++fi ++ ++ ++ ++# Extract the first word of "docbook2man", so it can be a program name with args. ++set dummy docbook2man; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_DOCBOOK2MAN+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $DOCBOOK2MAN in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_DOCBOOK2MAN="$DOCBOOK2MAN" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_DOCBOOK2MAN="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ test -z "$ac_cv_path_DOCBOOK2MAN" && ac_cv_path_DOCBOOK2MAN="no" ++ ;; ++esac ++fi ++DOCBOOK2MAN=$ac_cv_path_DOCBOOK2MAN ++if test -n "$DOCBOOK2MAN"; then ++ { echo "$as_me:$LINENO: result: $DOCBOOK2MAN" >&5 ++echo "${ECHO_T}$DOCBOOK2MAN" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++if test "$DOCBOOK2MAN" = "no" ; then ++ { echo "$as_me:$LINENO: WARNING: docbook2man not found, will not be able to build man documentation" >&5 ++echo "$as_me: WARNING: docbook2man not found, will not be able to build man documentation" >&2;} ++fi ++ ++ ++if test "$DOCBOOK2MAN" != "no"; then ++ HAVE_DOCBOOK2MAN_TRUE= ++ HAVE_DOCBOOK2MAN_FALSE='#' ++else ++ HAVE_DOCBOOK2MAN_TRUE='#' ++ HAVE_DOCBOOK2MAN_FALSE= ++fi ++ ++ ++ ++# Check whether --enable-more-warnings was given. ++if test "${enable_more_warnings+set}" = set; then ++ enableval=$enable_more_warnings; set_more_warnings="$enableval" ++else ++ ++if test -d $srcdir/CVS; then ++ is_cvs_version=true ++ set_more_warnings=yes ++else ++ set_more_warnings=no ++fi ++ ++fi ++ ++{ echo "$as_me:$LINENO: checking for more warnings" >&5 ++echo $ECHO_N "checking for more warnings... $ECHO_C" >&6; } ++if test "$GCC" = "yes" -a "$set_more_warnings" != "no"; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ CFLAGS="\ ++ -Wall \ ++ -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes \ ++ -Wnested-externs -Wpointer-arith \ ++ -Wcast-align -Wsign-compare \ ++ $CFLAGS" ++ ++ for option in -Wno-strict-aliasing -Wno-sign-compare; do ++ SAVE_CFLAGS="$CFLAGS" ++ CFLAGS="$CFLAGS $option" ++ { echo "$as_me:$LINENO: checking whether gcc understands $option" >&5 ++echo $ECHO_N "checking whether gcc understands $option... $ECHO_C" >&6; } ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ has_option=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ has_option=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ if test $has_option = no; then ++ CFLAGS="$SAVE_CFLAGS" ++ fi ++ { echo "$as_me:$LINENO: result: $has_option" >&5 ++echo "${ECHO_T}$has_option" >&6; } ++ unset has_option ++ unset SAVE_CFLAGS ++ done ++ unset option ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ac_config_files="$ac_config_files Makefile src/Makefile src/dbus/Makefile applets/Makefile applets/brightness/Makefile applets/inhibit/Makefile libhal-glib/Makefile libdbus-glib/Makefile libidletime/Makefile libunique/Makefile docs/Makefile man/Makefile help/Makefile po/Makefile.in tools/Makefile test/Makefile data/Makefile data/gnome-power-manager.desktop.in data/gnome-power-preferences.desktop.in data/gnome-power-statistics.desktop.in data/sounds/Makefile data/icons/Makefile data/icons/16x16/Makefile data/icons/16x16/actions/Makefile data/icons/16x16/apps/Makefile data/icons/16x16/status/Makefile data/icons/22x22/Makefile data/icons/22x22/actions/Makefile data/icons/22x22/apps/Makefile data/icons/22x22/status/Makefile data/icons/24x24/Makefile data/icons/24x24/actions/Makefile data/icons/24x24/apps/Makefile data/icons/24x24/status/Makefile data/icons/48x48/Makefile data/icons/48x48/actions/Makefile data/icons/48x48/apps/Makefile data/icons/48x48/status/Makefile data/icons/scalable/Makefile data/icons/scalable/actions/Makefile data/icons/scalable/apps/Makefile data/icons/scalable/status/Makefile" ++ ++ ++cat >confcache <<\_ACEOF ++# This file is a shell script that caches the results of configure ++# tests run on this system so they can be shared between configure ++# scripts and configure runs, see configure's option --config-cache. ++# It is not useful on other systems. If it contains results you don't ++# want to keep, you may remove or edit it. ++# ++# config.status only pays attention to the cache file if you give it ++# the --recheck option to rerun configure. ++# ++# `ac_cv_env_foo' variables (set or unset) will be overridden when ++# loading this file, other *unset* `ac_cv_foo' will be assigned the ++# following values. ++ ++_ACEOF ++ ++# The following way of writing the cache mishandles newlines in values, ++# but we know of no workaround that is simple, portable, and efficient. ++# So, we kill variables containing newlines. ++# Ultrix sh set writes to stderr and can't be redirected directly, ++# and sets the high bit in the cache file unless we assign to the vars. ++( ++ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ *) $as_unset $ac_var ;; ++ esac ;; ++ esac ++ done ++ ++ (set) 2>&1 | ++ case $as_nl`(ac_space=' '; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) ++ # `set' does not quote correctly, so add quotes (double-quote ++ # substitution turns \\\\ into \\, and sed turns \\ into \). ++ sed -n \ ++ "s/'/'\\\\''/g; ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ++ ;; #( ++ *) ++ # `set' quotes correctly as required by POSIX, so do not add quotes. ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ++ ;; ++ esac | ++ sort ++) | ++ sed ' ++ /^ac_cv_env_/b end ++ t clear ++ :clear ++ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ ++ t end ++ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ ++ :end' >>confcache ++if diff "$cache_file" confcache >/dev/null 2>&1; then :; else ++ if test -w "$cache_file"; then ++ test "x$cache_file" != "x/dev/null" && ++ { echo "$as_me:$LINENO: updating cache $cache_file" >&5 ++echo "$as_me: updating cache $cache_file" >&6;} ++ cat confcache >$cache_file ++ else ++ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 ++echo "$as_me: not updating unwritable cache $cache_file" >&6;} ++ fi ++fi ++rm -f confcache ++ ++test "x$prefix" = xNONE && prefix=$ac_default_prefix ++# Let make expand exec_prefix. ++test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' ++ ++DEFS=-DHAVE_CONFIG_H ++ ++ac_libobjs= ++ac_ltlibobjs= ++for ac_i in : $LIB@&t@OBJS; do test "x$ac_i" = x: && continue ++ # 1. Remove the extension, and $U if already installed. ++ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ++ ac_i=`echo "$ac_i" | sed "$ac_script"` ++ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR ++ # will be set to the directory where LIBOBJS objects are built. ++ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" ++ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' ++done ++LIB@&t@OBJS=$ac_libobjs ++ ++LTLIBOBJS=$ac_ltlibobjs ++ ++ ++if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"AMDEP\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++ ac_config_commands="$ac_config_commands po/stamp-it" ++ ++ ++if test -z "${ENABLE_SK_TRUE}" && test -z "${ENABLE_SK_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"ENABLE_SK\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"ENABLE_SK\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${HAVE_GNOME_DOC_UTILS_TRUE}" && test -z "${HAVE_GNOME_DOC_UTILS_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_GNOME_DOC_UTILS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"HAVE_GNOME_DOC_UTILS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${GCONF_SCHEMAS_INSTALL_TRUE}" && test -z "${GCONF_SCHEMAS_INSTALL_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"GCONF_SCHEMAS_INSTALL\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"GCONF_SCHEMAS_INSTALL\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${HAVE_TESTS_TRUE}" && test -z "${HAVE_TESTS_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_TESTS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"HAVE_TESTS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${HAVE_GCONF_DEFAULTS_TRUE}" && test -z "${HAVE_GCONF_DEFAULTS_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_GCONF_DEFAULTS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"HAVE_GCONF_DEFAULTS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${HAVE_APPLETS_TRUE}" && test -z "${HAVE_APPLETS_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_APPLETS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"HAVE_APPLETS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${DOCBOOK_DOCS_ENABLED_TRUE}" && test -z "${DOCBOOK_DOCS_ENABLED_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"DOCBOOK_DOCS_ENABLED\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"DOCBOOK_DOCS_ENABLED\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${HAVE_LIBNOTIFY_TRUE}" && test -z "${HAVE_LIBNOTIFY_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_LIBNOTIFY\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"HAVE_LIBNOTIFY\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${HAVE_UNIQUE_TRUE}" && test -z "${HAVE_UNIQUE_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_UNIQUE\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"HAVE_UNIQUE\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${HAVE_DOCBOOK2MAN_TRUE}" && test -z "${HAVE_DOCBOOK2MAN_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_DOCBOOK2MAN\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"HAVE_DOCBOOK2MAN\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++: ${CONFIG_STATUS=./config.status} ++ac_clean_files_save=$ac_clean_files ++ac_clean_files="$ac_clean_files $CONFIG_STATUS" ++{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 ++echo "$as_me: creating $CONFIG_STATUS" >&6;} ++cat >$CONFIG_STATUS <<_ACEOF ++#! $SHELL ++# Generated by $as_me. ++# Run this file to recreate the current configuration. ++# Compiler output produced by configure, useful for debugging ++# configure, is in config.log if it exists. ++ ++debug=false ++ac_cs_recheck=false ++ac_cs_silent=false ++SHELL=\${CONFIG_SHELL-$SHELL} ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF ++## --------------------- ## ++## M4sh Initialization. ## ++## --------------------- ## ++ ++# Be more Bourne compatible ++DUALCASE=1; export DUALCASE # for MKS sh ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++ ++ ++# PATH needs CR ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits ++ ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ echo "#! /bin/sh" >conf$$.sh ++ echo "exit 0" >>conf$$.sh ++ chmod +x conf$$.sh ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then ++ PATH_SEPARATOR=';' ++ else ++ PATH_SEPARATOR=: ++ fi ++ rm -f conf$$.sh ++fi ++ ++# Support unset when possible. ++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then ++ as_unset=unset ++else ++ as_unset=false ++fi ++ ++ ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++as_nl=' ++' ++IFS=" "" $as_nl" ++ ++# Find who we are. Look in the path if we contain no directory separator. ++case $0 in ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 ++fi ++if test ! -f "$as_myself"; then ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ { (exit 1); exit 1; } ++fi ++ ++# Work around bugs in pre-3.0 UWIN ksh. ++for as_var in ENV MAIL MAILPATH ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++done ++PS1='$ ' ++PS2='> ' ++PS4='+ ' ++ ++# NLS nuisances. ++for as_var in \ ++ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ ++ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ ++ LC_TELEPHONE LC_TIME ++do ++ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then ++ eval $as_var=C; export $as_var ++ else ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++ fi ++done ++ ++# Required to use basename. ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then ++ as_expr=expr ++else ++ as_expr=false ++fi ++ ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then ++ as_basename=basename ++else ++ as_basename=false ++fi ++ ++ ++# Name of the executable. ++as_me=`$as_basename -- "$0" || ++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ ++ X"$0" : 'X\(//\)$' \| \ ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || ++echo X/"$0" | ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ ++# CDPATH. ++$as_unset CDPATH ++ ++ ++ ++ as_lineno_1=$LINENO ++ as_lineno_2=$LINENO ++ test "x$as_lineno_1" != "x$as_lineno_2" && ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { ++ ++ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO ++ # uniformly replaced by the line number. The first 'sed' inserts a ++ # line-number line after each line using $LINENO; the second 'sed' ++ # does the real work. The second script uses 'N' to pair each ++ # line-number line with the line containing $LINENO, and appends ++ # trailing '-' during substitution so that $LINENO is not a special ++ # case at line end. ++ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the ++ # scripts with optimization help from Paolo Bonzini. Blame Lee ++ # E. McMahon (1931-1989) for sed's syntax. :-) ++ sed -n ' ++ p ++ /[$]LINENO/= ++ ' <$as_myself | ++ sed ' ++ s/[$]LINENO.*/&-/ ++ t lineno ++ b ++ :lineno ++ N ++ :loop ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ ++ t loop ++ s/-\n.*// ++ ' >$as_me.lineno && ++ chmod +x "$as_me.lineno" || ++ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 ++ { (exit 1); exit 1; }; } ++ ++ # Don't try to exec as it changes $[0], causing all sort of problems ++ # (the dirname of $[0] is not the place where we might find the ++ # original and so on. Autoconf is especially sensitive to this). ++ . "./$as_me.lineno" ++ # Exit status is that of the last command. ++ exit ++} ++ ++ ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false ++fi ++ ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in ++-n*) ++ case `echo 'x\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ *) ECHO_C='\c';; ++ esac;; ++*) ++ ECHO_N='-n';; ++esac ++ ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then ++ as_expr=expr ++else ++ as_expr=false ++fi ++ ++rm -f conf$$ conf$$.exe conf$$.file ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file ++else ++ rm -f conf$$.dir ++ mkdir conf$$.dir ++fi ++echo >conf$$.file ++if ln -s conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || ++ as_ln_s='cp -p' ++elif ln conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s=ln ++else ++ as_ln_s='cp -p' ++fi ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null ++ ++if mkdir -p . 2>/dev/null; then ++ as_mkdir_p=: ++else ++ test -d ./-p && rmdir ./-p ++ as_mkdir_p=false ++fi ++ ++if test -x / >/dev/null 2>&1; then ++ as_test_x='test -x' ++else ++ if ls -dL / >/dev/null 2>&1; then ++ as_ls_L_option=L ++ else ++ as_ls_L_option= ++ fi ++ as_test_x=' ++ eval sh -c '\'' ++ if test -d "$1"; then ++ test -d "$1/."; ++ else ++ case $1 in ++ -*)set "./$1";; ++ esac; ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ++ ???[sx]*):;;*)false;;esac;fi ++ '\'' sh ++ ' ++fi ++as_executable_p=$as_test_x ++ ++# Sed expression to map a string onto a valid CPP name. ++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" ++ ++# Sed expression to map a string onto a valid variable name. ++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" ++ ++ ++exec 6>&1 ++ ++# Save the log message, to keep $[0] and so on meaningful, and to ++# report actual input values of CONFIG_FILES etc. instead of their ++# values after options handling. ++ac_log=" ++This file was extended by gnome-power-manager $as_me 2.24.0, which was ++generated by GNU Autoconf 2.61. Invocation command line was ++ ++ CONFIG_FILES = $CONFIG_FILES ++ CONFIG_HEADERS = $CONFIG_HEADERS ++ CONFIG_LINKS = $CONFIG_LINKS ++ CONFIG_COMMANDS = $CONFIG_COMMANDS ++ $ $0 $@ ++ ++on `(hostname || uname -n) 2>/dev/null | sed 1q` ++" ++ ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<_ACEOF ++# Files that config.status was made for. ++config_files="$ac_config_files" ++config_headers="$ac_config_headers" ++config_commands="$ac_config_commands" ++ ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF ++ac_cs_usage="\ ++\`$as_me' instantiates files from templates according to the ++current configuration. ++ ++Usage: $0 [OPTIONS] [FILE]... ++ ++ -h, --help print this help, then exit ++ -V, --version print version number and configuration settings, then exit ++ -q, --quiet do not print progress messages ++ -d, --debug don't remove temporary files ++ --recheck update $as_me by reconfiguring in the same conditions ++ --file=FILE[:TEMPLATE] ++ instantiate the configuration file FILE ++ --header=FILE[:TEMPLATE] ++ instantiate the configuration header FILE ++ ++Configuration files: ++$config_files ++ ++Configuration headers: ++$config_headers ++ ++Configuration commands: ++$config_commands ++ ++Report bugs to ." ++ ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF ++ac_cs_version="\\ ++gnome-power-manager config.status 2.24.0 ++configured by $0, generated by GNU Autoconf 2.61, ++ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" ++ ++Copyright (C) 2006 Free Software Foundation, Inc. ++This config.status script is free software; the Free Software Foundation ++gives unlimited permission to copy, distribute and modify it." ++ ++ac_pwd='$ac_pwd' ++srcdir='$srcdir' ++INSTALL='$INSTALL' ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF ++# If no file are specified by the user, then we need to provide default ++# value. By we need to know if files were specified by the user. ++ac_need_defaults=: ++while test $# != 0 ++do ++ case $1 in ++ --*=*) ++ ac_option=`expr "X$1" : 'X\([^=]*\)='` ++ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ++ ac_shift=: ++ ;; ++ *) ++ ac_option=$1 ++ ac_optarg=$2 ++ ac_shift=shift ++ ;; ++ esac ++ ++ case $ac_option in ++ # Handling of the options. ++ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ++ ac_cs_recheck=: ;; ++ --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) ++ echo "$ac_cs_version"; exit ;; ++ --debug | --debu | --deb | --de | --d | -d ) ++ debug=: ;; ++ --file | --fil | --fi | --f ) ++ $ac_shift ++ CONFIG_FILES="$CONFIG_FILES $ac_optarg" ++ ac_need_defaults=false;; ++ --header | --heade | --head | --hea ) ++ $ac_shift ++ CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" ++ ac_need_defaults=false;; ++ --he | --h) ++ # Conflict between --help and --header ++ { echo "$as_me: error: ambiguous option: $1 ++Try \`$0 --help' for more information." >&2 ++ { (exit 1); exit 1; }; };; ++ --help | --hel | -h ) ++ echo "$ac_cs_usage"; exit ;; ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ++ | -silent | --silent | --silen | --sile | --sil | --si | --s) ++ ac_cs_silent=: ;; ++ ++ # This is an error. ++ -*) { echo "$as_me: error: unrecognized option: $1 ++Try \`$0 --help' for more information." >&2 ++ { (exit 1); exit 1; }; } ;; ++ ++ *) ac_config_targets="$ac_config_targets $1" ++ ac_need_defaults=false ;; ++ ++ esac ++ shift ++done ++ ++ac_configure_extra_args= ++ ++if $ac_cs_silent; then ++ exec 6>/dev/null ++ ac_configure_extra_args="$ac_configure_extra_args --silent" ++fi ++ ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF ++if \$ac_cs_recheck; then ++ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 ++ CONFIG_SHELL=$SHELL ++ export CONFIG_SHELL ++ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion ++fi ++ ++_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF ++exec 5>>config.log ++{ ++ echo ++ sed 'h;s/./-/g;s/^.../@%:@@%:@ /;s/...$/ @%:@@%:@/;p;x;p;x' <<_ASBOX ++@%:@@%:@ Running $as_me. @%:@@%:@ ++_ASBOX ++ echo "$ac_log" ++} >&5 ++ ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF ++# ++# INIT-COMMANDS ++# ++AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" ++ ++ ++# The HP-UX ksh and POSIX shell print the target directory to stdout ++# if CDPATH is set. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++ ++sed_quote_subst='$sed_quote_subst' ++double_quote_subst='$double_quote_subst' ++delay_variable_subst='$delay_variable_subst' ++macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`' ++macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`' ++enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`' ++enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`' ++pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`' ++enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`' ++host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`' ++host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`' ++host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`' ++build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`' ++build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`' ++build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`' ++SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`' ++Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`' ++GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`' ++EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`' ++FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`' ++LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`' ++NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`' ++LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`' ++max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`' ++ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`' ++exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`' ++lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`' ++lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`' ++lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`' ++reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`' ++reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`' ++file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`' ++AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`' ++AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`' ++STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`' ++RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`' ++old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`' ++CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`' ++compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`' ++GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' ++objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`' ++SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`' ++ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`' ++MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`' ++lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`' ++lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`' ++lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`' ++lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`' ++need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`' ++DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`' ++NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`' ++LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`' ++OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`' ++OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`' ++libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`' ++shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`' ++enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`' ++export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' ++whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' ++compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`' ++old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`' ++allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' ++no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`' ++inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`' ++link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`' ++fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`' ++always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`' ++export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`' ++include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`' ++prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`' ++variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`' ++need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' ++need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`' ++version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`' ++runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`' ++shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' ++shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`' ++libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`' ++library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`' ++soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`' ++postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`' ++sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`' ++sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`' ++enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`' ++enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`' ++enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`' ++old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`' ++striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`' ++ ++LTCC='$LTCC' ++LTCFLAGS='$LTCFLAGS' ++compiler='$compiler_DEFAULT' ++ ++# Quote evaled strings. ++for var in SED \ ++GREP \ ++EGREP \ ++FGREP \ ++LD \ ++NM \ ++LN_S \ ++lt_SP2NL \ ++lt_NL2SP \ ++reload_flag \ ++deplibs_check_method \ ++file_magic_cmd \ ++AR \ ++AR_FLAGS \ ++STRIP \ ++RANLIB \ ++CC \ ++CFLAGS \ ++compiler \ ++lt_cv_sys_global_symbol_pipe \ ++lt_cv_sys_global_symbol_to_cdecl \ ++lt_cv_sys_global_symbol_to_c_name_address \ ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ ++SHELL \ ++ECHO \ ++lt_prog_compiler_no_builtin_flag \ ++lt_prog_compiler_wl \ ++lt_prog_compiler_pic \ ++lt_prog_compiler_static \ ++lt_cv_prog_compiler_c_o \ ++need_locks \ ++DSYMUTIL \ ++NMEDIT \ ++LIPO \ ++OTOOL \ ++OTOOL64 \ ++shrext_cmds \ ++export_dynamic_flag_spec \ ++whole_archive_flag_spec \ ++compiler_needs_object \ ++with_gnu_ld \ ++allow_undefined_flag \ ++no_undefined_flag \ ++hardcode_libdir_flag_spec \ ++hardcode_libdir_flag_spec_ld \ ++hardcode_libdir_separator \ ++fix_srcfile_path \ ++exclude_expsyms \ ++include_expsyms \ ++file_list_spec \ ++variables_saved_for_relink \ ++libname_spec \ ++library_names_spec \ ++soname_spec \ ++finish_eval \ ++old_striplib \ ++striplib; do ++ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in ++ *[\\\\\\\`\\"\\\$]*) ++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ++ ;; ++ *) ++ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ++ ;; ++ esac ++done ++ ++# Double-quote double-evaled strings. ++for var in reload_cmds \ ++old_postinstall_cmds \ ++old_postuninstall_cmds \ ++old_archive_cmds \ ++extract_expsyms_cmds \ ++old_archive_from_new_cmds \ ++old_archive_from_expsyms_cmds \ ++archive_cmds \ ++archive_expsym_cmds \ ++module_cmds \ ++module_expsym_cmds \ ++export_symbols_cmds \ ++prelink_cmds \ ++postinstall_cmds \ ++postuninstall_cmds \ ++finish_cmds \ ++sys_lib_search_path_spec \ ++sys_lib_dlsearch_path_spec; do ++ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in ++ *[\\\\\\\`\\"\\\$]*) ++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ++ ;; ++ *) ++ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ++ ;; ++ esac ++done ++ ++# Fix-up fallback echo if it was mangled by the above quoting rules. ++case \$lt_ECHO in ++*'\\\$0 --fallback-echo"') lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\` ++ ;; ++esac ++ ++ac_aux_dir='$ac_aux_dir' ++xsi_shell='$xsi_shell' ++lt_shell_append='$lt_shell_append' ++ ++# See if we are running on zsh, and set the options which allow our ++# commands through without removal of \ escapes INIT. ++if test -n "\${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++fi ++ ++ ++ PACKAGE='$PACKAGE' ++ VERSION='$VERSION' ++ TIMESTAMP='$TIMESTAMP' ++ RM='$RM' ++ ofile='$ofile' ++ ++ ++ ++INTLTOOL_PERL='${INTLTOOL_PERL}' ac_aux_dir='${ac_aux_dir}' ++prefix="$prefix" exec_prefix="$exec_prefix" INTLTOOL_LIBDIR="$libdir" ++INTLTOOL_EXTRACT='${INTLTOOL_EXTRACT}' ++ ++ ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF ++ ++# Handling of arguments. ++for ac_config_target in $ac_config_targets ++do ++ case $ac_config_target in ++ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; ++ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; ++ "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; ++ "intltool") CONFIG_COMMANDS="$CONFIG_COMMANDS intltool" ;; ++ "default-1") CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;; ++ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; ++ "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; ++ "src/dbus/Makefile") CONFIG_FILES="$CONFIG_FILES src/dbus/Makefile" ;; ++ "applets/Makefile") CONFIG_FILES="$CONFIG_FILES applets/Makefile" ;; ++ "applets/brightness/Makefile") CONFIG_FILES="$CONFIG_FILES applets/brightness/Makefile" ;; ++ "applets/inhibit/Makefile") CONFIG_FILES="$CONFIG_FILES applets/inhibit/Makefile" ;; ++ "libhal-glib/Makefile") CONFIG_FILES="$CONFIG_FILES libhal-glib/Makefile" ;; ++ "libdbus-glib/Makefile") CONFIG_FILES="$CONFIG_FILES libdbus-glib/Makefile" ;; ++ "libidletime/Makefile") CONFIG_FILES="$CONFIG_FILES libidletime/Makefile" ;; ++ "libunique/Makefile") CONFIG_FILES="$CONFIG_FILES libunique/Makefile" ;; ++ "docs/Makefile") CONFIG_FILES="$CONFIG_FILES docs/Makefile" ;; ++ "man/Makefile") CONFIG_FILES="$CONFIG_FILES man/Makefile" ;; ++ "help/Makefile") CONFIG_FILES="$CONFIG_FILES help/Makefile" ;; ++ "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; ++ "tools/Makefile") CONFIG_FILES="$CONFIG_FILES tools/Makefile" ;; ++ "test/Makefile") CONFIG_FILES="$CONFIG_FILES test/Makefile" ;; ++ "data/Makefile") CONFIG_FILES="$CONFIG_FILES data/Makefile" ;; ++ "data/gnome-power-manager.desktop.in") CONFIG_FILES="$CONFIG_FILES data/gnome-power-manager.desktop.in" ;; ++ "data/gnome-power-preferences.desktop.in") CONFIG_FILES="$CONFIG_FILES data/gnome-power-preferences.desktop.in" ;; ++ "data/gnome-power-statistics.desktop.in") CONFIG_FILES="$CONFIG_FILES data/gnome-power-statistics.desktop.in" ;; ++ "data/sounds/Makefile") CONFIG_FILES="$CONFIG_FILES data/sounds/Makefile" ;; ++ "data/icons/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/Makefile" ;; ++ "data/icons/16x16/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/16x16/Makefile" ;; ++ "data/icons/16x16/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/16x16/actions/Makefile" ;; ++ "data/icons/16x16/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/16x16/apps/Makefile" ;; ++ "data/icons/16x16/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/16x16/status/Makefile" ;; ++ "data/icons/22x22/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/22x22/Makefile" ;; ++ "data/icons/22x22/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/22x22/actions/Makefile" ;; ++ "data/icons/22x22/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/22x22/apps/Makefile" ;; ++ "data/icons/22x22/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/22x22/status/Makefile" ;; ++ "data/icons/24x24/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/24x24/Makefile" ;; ++ "data/icons/24x24/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/24x24/actions/Makefile" ;; ++ "data/icons/24x24/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/24x24/apps/Makefile" ;; ++ "data/icons/24x24/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/24x24/status/Makefile" ;; ++ "data/icons/48x48/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/48x48/Makefile" ;; ++ "data/icons/48x48/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/48x48/actions/Makefile" ;; ++ "data/icons/48x48/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/48x48/apps/Makefile" ;; ++ "data/icons/48x48/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/48x48/status/Makefile" ;; ++ "data/icons/scalable/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/scalable/Makefile" ;; ++ "data/icons/scalable/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/scalable/actions/Makefile" ;; ++ "data/icons/scalable/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/scalable/apps/Makefile" ;; ++ "data/icons/scalable/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/scalable/status/Makefile" ;; ++ "po/stamp-it") CONFIG_COMMANDS="$CONFIG_COMMANDS po/stamp-it" ;; ++ ++ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 ++echo "$as_me: error: invalid argument: $ac_config_target" >&2;} ++ { (exit 1); exit 1; }; };; ++ esac ++done ++ ++ ++# If the user did not use the arguments to specify the items to instantiate, ++# then the envvar interface is used. Set only those that are not. ++# We use the long form for the default assignment because of an extremely ++# bizarre bug on SunOS 4.1.3. ++if $ac_need_defaults; then ++ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files ++ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers ++ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands ++fi ++ ++# Have a temporary directory for convenience. Make it in the build tree ++# simply because there is no reason against having it here, and in addition, ++# creating and moving files from /tmp can sometimes cause problems. ++# Hook for its removal unless debugging. ++# Note that there is a small window in which the directory will not be cleaned: ++# after its creation but before its name has been assigned to `$tmp'. ++$debug || ++{ ++ tmp= ++ trap 'exit_status=$? ++ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ++' 0 ++ trap '{ (exit 1); exit 1; }' 1 2 13 15 ++} ++# Create a (secure) tmp directory for tmp files. ++ ++{ ++ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && ++ test -n "$tmp" && test -d "$tmp" ++} || ++{ ++ tmp=./conf$$-$RANDOM ++ (umask 077 && mkdir "$tmp") ++} || ++{ ++ echo "$me: cannot create a temporary directory in ." >&2 ++ { (exit 1); exit 1; } ++} ++ ++# ++# Set up the sed scripts for CONFIG_FILES section. ++# ++ ++# No need to generate the scripts if there are no CONFIG_FILES. ++# This happens for instance when ./config.status config.h ++if test -n "$CONFIG_FILES"; then ++ ++_ACEOF ++ ++ ++ ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ cat >conf$$subs.sed <<_ACEOF ++SHELL!$SHELL$ac_delim ++PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim ++PACKAGE_NAME!$PACKAGE_NAME$ac_delim ++PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim ++PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim ++PACKAGE_STRING!$PACKAGE_STRING$ac_delim ++PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim ++exec_prefix!$exec_prefix$ac_delim ++prefix!$prefix$ac_delim ++program_transform_name!$program_transform_name$ac_delim ++bindir!$bindir$ac_delim ++sbindir!$sbindir$ac_delim ++libexecdir!$libexecdir$ac_delim ++datarootdir!$datarootdir$ac_delim ++datadir!$datadir$ac_delim ++sysconfdir!$sysconfdir$ac_delim ++sharedstatedir!$sharedstatedir$ac_delim ++localstatedir!$localstatedir$ac_delim ++includedir!$includedir$ac_delim ++oldincludedir!$oldincludedir$ac_delim ++docdir!$docdir$ac_delim ++infodir!$infodir$ac_delim ++htmldir!$htmldir$ac_delim ++dvidir!$dvidir$ac_delim ++pdfdir!$pdfdir$ac_delim ++psdir!$psdir$ac_delim ++libdir!$libdir$ac_delim ++localedir!$localedir$ac_delim ++mandir!$mandir$ac_delim ++DEFS!$DEFS$ac_delim ++ECHO_C!$ECHO_C$ac_delim ++ECHO_N!$ECHO_N$ac_delim ++ECHO_T!$ECHO_T$ac_delim ++LIBS!$LIBS$ac_delim ++build_alias!$build_alias$ac_delim ++host_alias!$host_alias$ac_delim ++target_alias!$target_alias$ac_delim ++INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim ++INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim ++INSTALL_DATA!$INSTALL_DATA$ac_delim ++CYGPATH_W!$CYGPATH_W$ac_delim ++PACKAGE!$PACKAGE$ac_delim ++VERSION!$VERSION$ac_delim ++ACLOCAL!$ACLOCAL$ac_delim ++AUTOCONF!$AUTOCONF$ac_delim ++AUTOMAKE!$AUTOMAKE$ac_delim ++AUTOHEADER!$AUTOHEADER$ac_delim ++MAKEINFO!$MAKEINFO$ac_delim ++install_sh!$install_sh$ac_delim ++STRIP!$STRIP$ac_delim ++INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim ++mkdir_p!$mkdir_p$ac_delim ++AWK!$AWK$ac_delim ++SET_MAKE!$SET_MAKE$ac_delim ++am__leading_dot!$am__leading_dot$ac_delim ++AMTAR!$AMTAR$ac_delim ++am__tar!$am__tar$ac_delim ++am__untar!$am__untar$ac_delim ++CC!$CC$ac_delim ++CFLAGS!$CFLAGS$ac_delim ++LDFLAGS!$LDFLAGS$ac_delim ++CPPFLAGS!$CPPFLAGS$ac_delim ++ac_ct_CC!$ac_ct_CC$ac_delim ++EXEEXT!$EXEEXT$ac_delim ++OBJEXT!$OBJEXT$ac_delim ++DEPDIR!$DEPDIR$ac_delim ++am__include!$am__include$ac_delim ++am__quote!$am__quote$ac_delim ++AMDEP_TRUE!$AMDEP_TRUE$ac_delim ++AMDEP_FALSE!$AMDEP_FALSE$ac_delim ++AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim ++CCDEPMODE!$CCDEPMODE$ac_delim ++am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim ++am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim ++LIBTOOL!$LIBTOOL$ac_delim ++build!$build$ac_delim ++build_cpu!$build_cpu$ac_delim ++build_vendor!$build_vendor$ac_delim ++build_os!$build_os$ac_delim ++host!$host$ac_delim ++host_cpu!$host_cpu$ac_delim ++host_vendor!$host_vendor$ac_delim ++host_os!$host_os$ac_delim ++SED!$SED$ac_delim ++GREP!$GREP$ac_delim ++EGREP!$EGREP$ac_delim ++FGREP!$FGREP$ac_delim ++LD!$LD$ac_delim ++DUMPBIN!$DUMPBIN$ac_delim ++ac_ct_DUMPBIN!$ac_ct_DUMPBIN$ac_delim ++NM!$NM$ac_delim ++LN_S!$LN_S$ac_delim ++AR!$AR$ac_delim ++RANLIB!$RANLIB$ac_delim ++lt_ECHO!$lt_ECHO$ac_delim ++DSYMUTIL!$DSYMUTIL$ac_delim ++NMEDIT!$NMEDIT$ac_delim ++_ACEOF ++ ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then ++ break ++ elif $ac_last_try; then ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " ++ fi ++done ++ ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` ++if test -n "$ac_eof"; then ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ++ ac_eof=`expr $ac_eof + 1` ++fi ++ ++cat >>$CONFIG_STATUS <<_ACEOF ++cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b ++_ACEOF ++sed ' ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g ++s/^/s,@/; s/!/@,|#_!!_#|/ ++:n ++t n ++s/'"$ac_delim"'$/,g/; t ++s/$/\\/; p ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ++' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF ++CEOF$ac_eof ++_ACEOF ++ ++ ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ cat >conf$$subs.sed <<_ACEOF ++LIPO!$LIPO$ac_delim ++OTOOL!$OTOOL$ac_delim ++OTOOL64!$OTOOL64$ac_delim ++CPP!$CPP$ac_delim ++INTLTOOL_DESKTOP_RULE!$INTLTOOL_DESKTOP_RULE$ac_delim ++INTLTOOL_DIRECTORY_RULE!$INTLTOOL_DIRECTORY_RULE$ac_delim ++INTLTOOL_KEYS_RULE!$INTLTOOL_KEYS_RULE$ac_delim ++INTLTOOL_PROP_RULE!$INTLTOOL_PROP_RULE$ac_delim ++INTLTOOL_OAF_RULE!$INTLTOOL_OAF_RULE$ac_delim ++INTLTOOL_PONG_RULE!$INTLTOOL_PONG_RULE$ac_delim ++INTLTOOL_SERVER_RULE!$INTLTOOL_SERVER_RULE$ac_delim ++INTLTOOL_SHEET_RULE!$INTLTOOL_SHEET_RULE$ac_delim ++INTLTOOL_SOUNDLIST_RULE!$INTLTOOL_SOUNDLIST_RULE$ac_delim ++INTLTOOL_UI_RULE!$INTLTOOL_UI_RULE$ac_delim ++INTLTOOL_XAM_RULE!$INTLTOOL_XAM_RULE$ac_delim ++INTLTOOL_KBD_RULE!$INTLTOOL_KBD_RULE$ac_delim ++INTLTOOL_XML_RULE!$INTLTOOL_XML_RULE$ac_delim ++INTLTOOL_XML_NOMERGE_RULE!$INTLTOOL_XML_NOMERGE_RULE$ac_delim ++INTLTOOL_CAVES_RULE!$INTLTOOL_CAVES_RULE$ac_delim ++INTLTOOL_SCHEMAS_RULE!$INTLTOOL_SCHEMAS_RULE$ac_delim ++INTLTOOL_THEME_RULE!$INTLTOOL_THEME_RULE$ac_delim ++INTLTOOL_SERVICE_RULE!$INTLTOOL_SERVICE_RULE$ac_delim ++INTLTOOL_POLICY_RULE!$INTLTOOL_POLICY_RULE$ac_delim ++XGETTEXT!$XGETTEXT$ac_delim ++MSGMERGE!$MSGMERGE$ac_delim ++MSGFMT!$MSGFMT$ac_delim ++INTLTOOL_EXTRACT!$INTLTOOL_EXTRACT$ac_delim ++INTLTOOL_MERGE!$INTLTOOL_MERGE$ac_delim ++INTLTOOL_UPDATE!$INTLTOOL_UPDATE$ac_delim ++INTLTOOL_PERL!$INTLTOOL_PERL$ac_delim ++ALL_LINGUAS!$ALL_LINGUAS$ac_delim ++DATADIRNAME!$DATADIRNAME$ac_delim ++WARN_CFLAGS!$WARN_CFLAGS$ac_delim ++PKG_CONFIG!$PKG_CONFIG$ac_delim ++HELP_DIR!$HELP_DIR$ac_delim ++OMF_DIR!$OMF_DIR$ac_delim ++DOC_USER_FORMATS!$DOC_USER_FORMATS$ac_delim ++ENABLE_SK_TRUE!$ENABLE_SK_TRUE$ac_delim ++ENABLE_SK_FALSE!$ENABLE_SK_FALSE$ac_delim ++DISTCHECK_CONFIGURE_FLAGS!$DISTCHECK_CONFIGURE_FLAGS$ac_delim ++HAVE_GNOME_DOC_UTILS_TRUE!$HAVE_GNOME_DOC_UTILS_TRUE$ac_delim ++HAVE_GNOME_DOC_UTILS_FALSE!$HAVE_GNOME_DOC_UTILS_FALSE$ac_delim ++GLIB_GENMARSHAL!$GLIB_GENMARSHAL$ac_delim ++GETTEXT_PACKAGE!$GETTEXT_PACKAGE$ac_delim ++USE_NLS!$USE_NLS$ac_delim ++MSGFMT_OPTS!$MSGFMT_OPTS$ac_delim ++GMSGFMT!$GMSGFMT$ac_delim ++CATALOGS!$CATALOGS$ac_delim ++CATOBJEXT!$CATOBJEXT$ac_delim ++GMOFILES!$GMOFILES$ac_delim ++INSTOBJEXT!$INSTOBJEXT$ac_delim ++INTLLIBS!$INTLLIBS$ac_delim ++PO_IN_DATADIR_TRUE!$PO_IN_DATADIR_TRUE$ac_delim ++PO_IN_DATADIR_FALSE!$PO_IN_DATADIR_FALSE$ac_delim ++POFILES!$POFILES$ac_delim ++POSUB!$POSUB$ac_delim ++MKINSTALLDIRS!$MKINSTALLDIRS$ac_delim ++GLIB_REQUIRED!$GLIB_REQUIRED$ac_delim ++GTK_REQUIRED!$GTK_REQUIRED$ac_delim ++GDK_REQUIRED!$GDK_REQUIRED$ac_delim ++LIBGNOME_REQUIRED!$LIBGNOME_REQUIRED$ac_delim ++LIBGNOMEUI_REQUIRED!$LIBGNOMEUI_REQUIRED$ac_delim ++HAL_REQUIRED!$HAL_REQUIRED$ac_delim ++DBUS_REQUIRED!$DBUS_REQUIRED$ac_delim ++LIBGLADE_REQUIRED!$LIBGLADE_REQUIRED$ac_delim ++LIBNOTIFY_REQUIRED!$LIBNOTIFY_REQUIRED$ac_delim ++LIBWNCK_REQUIRED!$LIBWNCK_REQUIRED$ac_delim ++CAIRO_REQUIRED!$CAIRO_REQUIRED$ac_delim ++UNIQUE_REQUIRED!$UNIQUE_REQUIRED$ac_delim ++LIBPANEL_REQUIRED!$LIBPANEL_REQUIRED$ac_delim ++GSTREAMER_REQUIRED!$GSTREAMER_REQUIRED$ac_delim ++XRANDR_REQUIRED!$XRANDR_REQUIRED$ac_delim ++POLKIT_GNOME_REQUIRED!$POLKIT_GNOME_REQUIRED$ac_delim ++GLIB_CFLAGS!$GLIB_CFLAGS$ac_delim ++GLIB_LIBS!$GLIB_LIBS$ac_delim ++HAL_CFLAGS!$HAL_CFLAGS$ac_delim ++HAL_LIBS!$HAL_LIBS$ac_delim ++GSTREAMER_CFLAGS!$GSTREAMER_CFLAGS$ac_delim ++GSTREAMER_LIBS!$GSTREAMER_LIBS$ac_delim ++DBUS_CFLAGS!$DBUS_CFLAGS$ac_delim ++DBUS_LIBS!$DBUS_LIBS$ac_delim ++GNOME_CFLAGS!$GNOME_CFLAGS$ac_delim ++GNOME_LIBS!$GNOME_LIBS$ac_delim ++GDK_CFLAGS!$GDK_CFLAGS$ac_delim ++GDK_LIBS!$GDK_LIBS$ac_delim ++XRANDR_CFLAGS!$XRANDR_CFLAGS$ac_delim ++XRANDR_LIBS!$XRANDR_LIBS$ac_delim ++GCONFTOOL!$GCONFTOOL$ac_delim ++GCONF_SCHEMA_CONFIG_SOURCE!$GCONF_SCHEMA_CONFIG_SOURCE$ac_delim ++GCONF_SCHEMA_FILE_DIR!$GCONF_SCHEMA_FILE_DIR$ac_delim ++GCONF_SCHEMAS_INSTALL_TRUE!$GCONF_SCHEMAS_INSTALL_TRUE$ac_delim ++GCONF_SCHEMAS_INSTALL_FALSE!$GCONF_SCHEMAS_INSTALL_FALSE$ac_delim ++XMKMF!$XMKMF$ac_delim ++X_CFLAGS!$X_CFLAGS$ac_delim ++X_PRE_LIBS!$X_PRE_LIBS$ac_delim ++X_LIBS!$X_LIBS$ac_delim ++X_EXTRA_LIBS!$X_EXTRA_LIBS$ac_delim ++_ACEOF ++ ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then ++ break ++ elif $ac_last_try; then ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " ++ fi ++done ++ ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` ++if test -n "$ac_eof"; then ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ++ ac_eof=`expr $ac_eof + 1` ++fi ++ ++cat >>$CONFIG_STATUS <<_ACEOF ++cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b ++_ACEOF ++sed ' ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g ++s/^/s,@/; s/!/@,|#_!!_#|/ ++:n ++t n ++s/'"$ac_delim"'$/,g/; t ++s/$/\\/; p ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ++' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF ++CEOF$ac_eof ++_ACEOF ++ ++ ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ cat >conf$$subs.sed <<_ACEOF ++SYSCONFDIR!$SYSCONFDIR$ac_delim ++DATADIR!$DATADIR$ac_delim ++BINDIR!$BINDIR$ac_delim ++SBINDIR!$SBINDIR$ac_delim ++DOCDIR!$DOCDIR$ac_delim ++POLKIT_CFLAGS!$POLKIT_CFLAGS$ac_delim ++POLKIT_LIBS!$POLKIT_LIBS$ac_delim ++HAVE_TESTS_TRUE!$HAVE_TESTS_TRUE$ac_delim ++HAVE_TESTS_FALSE!$HAVE_TESTS_FALSE$ac_delim ++POLKIT_GNOME_CFLAGS!$POLKIT_GNOME_CFLAGS$ac_delim ++POLKIT_GNOME_LIBS!$POLKIT_GNOME_LIBS$ac_delim ++HAVE_GCONF_DEFAULTS_TRUE!$HAVE_GCONF_DEFAULTS_TRUE$ac_delim ++HAVE_GCONF_DEFAULTS_FALSE!$HAVE_GCONF_DEFAULTS_FALSE$ac_delim ++HAVE_APPLETS_TRUE!$HAVE_APPLETS_TRUE$ac_delim ++HAVE_APPLETS_FALSE!$HAVE_APPLETS_FALSE$ac_delim ++XMLTO!$XMLTO$ac_delim ++DOCBOOK_DOCS_ENABLED_TRUE!$DOCBOOK_DOCS_ENABLED_TRUE$ac_delim ++DOCBOOK_DOCS_ENABLED_FALSE!$DOCBOOK_DOCS_ENABLED_FALSE$ac_delim ++DBUS_SERVICES_DIR!$DBUS_SERVICES_DIR$ac_delim ++LIBNOTIFY_CFLAGS!$LIBNOTIFY_CFLAGS$ac_delim ++LIBNOTIFY_LIBS!$LIBNOTIFY_LIBS$ac_delim ++HAVE_LIBNOTIFY_TRUE!$HAVE_LIBNOTIFY_TRUE$ac_delim ++HAVE_LIBNOTIFY_FALSE!$HAVE_LIBNOTIFY_FALSE$ac_delim ++UNIQUE_CFLAGS!$UNIQUE_CFLAGS$ac_delim ++UNIQUE_LIBS!$UNIQUE_LIBS$ac_delim ++HAVE_UNIQUE_TRUE!$HAVE_UNIQUE_TRUE$ac_delim ++HAVE_UNIQUE_FALSE!$HAVE_UNIQUE_FALSE$ac_delim ++GPM_EXTRA_LIBS!$GPM_EXTRA_LIBS$ac_delim ++DOCBOOK2MAN!$DOCBOOK2MAN$ac_delim ++HAVE_DOCBOOK2MAN_TRUE!$HAVE_DOCBOOK2MAN_TRUE$ac_delim ++HAVE_DOCBOOK2MAN_FALSE!$HAVE_DOCBOOK2MAN_FALSE$ac_delim ++LIB@&t@OBJS!$LIB@&t@OBJS$ac_delim ++LTLIBOBJS!$LTLIBOBJS$ac_delim ++_ACEOF ++ ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 33; then ++ break ++ elif $ac_last_try; then ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " ++ fi ++done ++ ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` ++if test -n "$ac_eof"; then ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ++ ac_eof=`expr $ac_eof + 1` ++fi ++ ++cat >>$CONFIG_STATUS <<_ACEOF ++cat >"\$tmp/subs-3.sed" <<\CEOF$ac_eof ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end ++_ACEOF ++sed ' ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g ++s/^/s,@/; s/!/@,|#_!!_#|/ ++:n ++t n ++s/'"$ac_delim"'$/,g/; t ++s/$/\\/; p ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ++' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF ++:end ++s/|#_!!_#|//g ++CEOF$ac_eof ++_ACEOF ++ ++ ++# VPATH may cause trouble with some makes, so we remove $(srcdir), ++# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and ++# trailing colons and then remove the whole line if VPATH becomes empty ++# (actually we leave an empty line to preserve line numbers). ++if test "x$srcdir" = x.; then ++ ac_vpsub='/^[ ]*VPATH[ ]*=/{ ++s/:*\$(srcdir):*/:/ ++s/:*\${srcdir}:*/:/ ++s/:*@srcdir@:*/:/ ++s/^\([^=]*=[ ]*\):*/\1/ ++s/:*$// ++s/^[^=]*=[ ]*$// ++}' ++fi ++ ++cat >>$CONFIG_STATUS <<\_ACEOF ++fi # test -n "$CONFIG_FILES" ++ ++ ++for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS ++do ++ case $ac_tag in ++ :[FHLC]) ac_mode=$ac_tag; continue;; ++ esac ++ case $ac_mode$ac_tag in ++ :[FHL]*:*);; ++ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 ++echo "$as_me: error: Invalid tag $ac_tag." >&2;} ++ { (exit 1); exit 1; }; };; ++ :[FH]-) ac_tag=-:-;; ++ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; ++ esac ++ ac_save_IFS=$IFS ++ IFS=: ++ set x $ac_tag ++ IFS=$ac_save_IFS ++ shift ++ ac_file=$1 ++ shift ++ ++ case $ac_mode in ++ :L) ac_source=$1;; ++ :[FH]) ++ ac_file_inputs= ++ for ac_f ++ do ++ case $ac_f in ++ -) ac_f="$tmp/stdin";; ++ *) # Look for the file first in the build tree, then in the source tree ++ # (if the path is not absolute). The absolute path cannot be DOS-style, ++ # because $ac_f cannot contain `:'. ++ test -f "$ac_f" || ++ case $ac_f in ++ [\\/$]*) false;; ++ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; ++ esac || ++ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 ++echo "$as_me: error: cannot find input file: $ac_f" >&2;} ++ { (exit 1); exit 1; }; };; ++ esac ++ ac_file_inputs="$ac_file_inputs $ac_f" ++ done ++ ++ # Let's still pretend it is `configure' which instantiates (i.e., don't ++ # use $as_me), people would be surprised to read: ++ # /* config.h. Generated by config.status. */ ++ configure_input="Generated from "`IFS=: ++ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." ++ if test x"$ac_file" != x-; then ++ configure_input="$ac_file. $configure_input" ++ { echo "$as_me:$LINENO: creating $ac_file" >&5 ++echo "$as_me: creating $ac_file" >&6;} ++ fi ++ ++ case $ac_tag in ++ *:-:* | *:-) cat >"$tmp/stdin";; ++ esac ++ ;; ++ esac ++ ++ ac_dir=`$as_dirname -- "$ac_file" || ++$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$ac_file" : 'X\(//\)[^/]' \| \ ++ X"$ac_file" : 'X\(//\)$' \| \ ++ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$ac_file" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ { as_dir="$ac_dir" ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { ++ as_dirs= ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || ++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$as_dir" : 'X\(//\)[^/]' \| \ ++ X"$as_dir" : 'X\(//\)$' \| \ ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$as_dir" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break ++ done ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 ++echo "$as_me: error: cannot create directory $as_dir" >&2;} ++ { (exit 1); exit 1; }; }; } ++ ac_builddir=. ++ ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) ++ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; ++esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix ++ ++case $srcdir in ++ .) # We are building in place. ++ ac_srcdir=. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. ++ ac_srcdir=$srcdir$ac_dir_suffix; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; ++esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix ++ ++ ++ case $ac_mode in ++ :F) ++ # ++ # CONFIG_FILE ++ # ++ ++ case $INSTALL in ++ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; ++ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; ++ esac ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF ++# If the template does not know about datarootdir, expand it. ++# FIXME: This hack should be removed a few years after 2.60. ++ac_datarootdir_hack=; ac_datarootdir_seen= ++ ++case `sed -n '/datarootdir/ { ++ p ++ q ++} ++/@datadir@/p ++/@docdir@/p ++/@infodir@/p ++/@localedir@/p ++/@mandir@/p ++' $ac_file_inputs` in ++*datarootdir*) ac_datarootdir_seen=yes;; ++*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) ++ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 ++echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF ++ ac_datarootdir_hack=' ++ s&@datadir@&$datadir&g ++ s&@docdir@&$docdir&g ++ s&@infodir@&$infodir&g ++ s&@localedir@&$localedir&g ++ s&@mandir@&$mandir&g ++ s&\\\${datarootdir}&$datarootdir&g' ;; ++esac ++_ACEOF ++ ++# Neutralize VPATH when `$srcdir' = `.'. ++# Shell code in configure.ac might set extrasub. ++# FIXME: do we really want to maintain this feature? ++cat >>$CONFIG_STATUS <<_ACEOF ++ sed "$ac_vpsub ++$extrasub ++_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF ++:t ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b ++s&@configure_input@&$configure_input&;t t ++s&@top_builddir@&$ac_top_builddir_sub&;t t ++s&@srcdir@&$ac_srcdir&;t t ++s&@abs_srcdir@&$ac_abs_srcdir&;t t ++s&@top_srcdir@&$ac_top_srcdir&;t t ++s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t ++s&@builddir@&$ac_builddir&;t t ++s&@abs_builddir@&$ac_abs_builddir&;t t ++s&@abs_top_builddir@&$ac_abs_top_builddir&;t t ++s&@INSTALL@&$ac_INSTALL&;t t ++$ac_datarootdir_hack ++" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" | sed -f "$tmp/subs-3.sed" >$tmp/out ++ ++test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && ++ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && ++ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && ++ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined." >&5 ++echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined." >&2;} ++ ++ rm -f "$tmp/stdin" ++ case $ac_file in ++ -) cat "$tmp/out"; rm -f "$tmp/out";; ++ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; ++ esac ++ ;; ++ :H) ++ # ++ # CONFIG_HEADER ++ # ++_ACEOF ++ ++# Transform confdefs.h into a sed script `conftest.defines', that ++# substitutes the proper values into config.h.in to produce config.h. ++rm -f conftest.defines conftest.tail ++# First, append a space to every undef/define line, to ease matching. ++echo 's/$/ /' >conftest.defines ++# Then, protect against being on the right side of a sed subst, or in ++# an unquoted here document, in config.status. If some macros were ++# called several times there might be several #defines for the same ++# symbol, which is useless. But do not sort them, since the last ++# AC_DEFINE must be honored. ++ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* ++# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where ++# NAME is the cpp macro being defined, VALUE is the value it is being given. ++# PARAMS is the parameter list in the macro definition--in most cases, it's ++# just an empty string. ++ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*' ++ac_dB='\\)[ (].*,\\1define\\2' ++ac_dC=' ' ++ac_dD=' ,' ++ ++uniq confdefs.h | ++ sed -n ' ++ t rset ++ :rset ++ s/^[ ]*#[ ]*define[ ][ ]*// ++ t ok ++ d ++ :ok ++ s/[\\&,]/\\&/g ++ s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p ++ s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p ++ ' >>conftest.defines ++ ++# Remove the space that was appended to ease matching. ++# Then replace #undef with comments. This is necessary, for ++# example, in the case of _POSIX_SOURCE, which is predefined and required ++# on some systems where configure will not decide to define it. ++# (The regexp can be short, since the line contains either #define or #undef.) ++echo 's/ $// ++s,^[ #]*u.*,/* & */,' >>conftest.defines ++ ++# Break up conftest.defines: ++ac_max_sed_lines=50 ++ ++# First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1" ++# Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2" ++# Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1" ++# et cetera. ++ac_in='$ac_file_inputs' ++ac_out='"$tmp/out1"' ++ac_nxt='"$tmp/out2"' ++ ++while : ++do ++ # Write a here document: ++ cat >>$CONFIG_STATUS <<_ACEOF ++ # First, check the format of the line: ++ cat >"\$tmp/defines.sed" <<\\CEOF ++/^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def ++/^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def ++b ++:def ++_ACEOF ++ sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS ++ echo 'CEOF ++ sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS ++ ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in ++ sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail ++ grep . conftest.tail >/dev/null || break ++ rm -f conftest.defines ++ mv conftest.tail conftest.defines ++done ++rm -f conftest.defines conftest.tail ++ ++echo "ac_result=$ac_in" >>$CONFIG_STATUS ++cat >>$CONFIG_STATUS <<\_ACEOF ++ if test x"$ac_file" != x-; then ++ echo "/* $configure_input */" >"$tmp/config.h" ++ cat "$ac_result" >>"$tmp/config.h" ++ if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then ++ { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 ++echo "$as_me: $ac_file is unchanged" >&6;} ++ else ++ rm -f $ac_file ++ mv "$tmp/config.h" $ac_file ++ fi ++ else ++ echo "/* $configure_input */" ++ cat "$ac_result" ++ fi ++ rm -f "$tmp/out12" ++# Compute $ac_file's index in $config_headers. ++_am_stamp_count=1 ++for _am_header in $config_headers :; do ++ case $_am_header in ++ $ac_file | $ac_file:* ) ++ break ;; ++ * ) ++ _am_stamp_count=`expr $_am_stamp_count + 1` ;; ++ esac ++done ++echo "timestamp for $ac_file" >`$as_dirname -- $ac_file || ++$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X$ac_file : 'X\(//\)[^/]' \| \ ++ X$ac_file : 'X\(//\)$' \| \ ++ X$ac_file : 'X\(/\)' \| . 2>/dev/null || ++echo X$ac_file | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'`/stamp-h$_am_stamp_count ++ ;; ++ ++ :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5 ++echo "$as_me: executing $ac_file commands" >&6;} ++ ;; ++ esac ++ ++ ++ case $ac_file$ac_mode in ++ "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do ++ # Strip MF so we end up with the name of the file. ++ mf=`echo "$mf" | sed -e 's/:.*$//'` ++ # Check whether this is an Automake generated Makefile or not. ++ # We used to match only the files named `Makefile.in', but ++ # some people rename them; so instead we look at the file content. ++ # Grep'ing the first line is not enough: some people post-process ++ # each Makefile.in and add a new line on top of each file to say so. ++ # So let's grep whole file. ++ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then ++ dirpart=`$as_dirname -- "$mf" || ++$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$mf" : 'X\(//\)[^/]' \| \ ++ X"$mf" : 'X\(//\)$' \| \ ++ X"$mf" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$mf" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ else ++ continue ++ fi ++ # Extract the definition of DEPDIR, am__include, and am__quote ++ # from the Makefile without running `make'. ++ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` ++ test -z "$DEPDIR" && continue ++ am__include=`sed -n 's/^am__include = //p' < "$mf"` ++ test -z "am__include" && continue ++ am__quote=`sed -n 's/^am__quote = //p' < "$mf"` ++ # When using ansi2knr, U may be empty or an underscore; expand it ++ U=`sed -n 's/^U = //p' < "$mf"` ++ # Find all dependency output files, they are included files with ++ # $(DEPDIR) in their names. We invoke sed twice because it is the ++ # simplest approach to changing $(DEPDIR) to its actual value in the ++ # expansion. ++ for file in `sed -n " ++ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ ++ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do ++ # Make sure the directory exists. ++ test -f "$dirpart/$file" && continue ++ fdir=`$as_dirname -- "$file" || ++$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$file" : 'X\(//\)[^/]' \| \ ++ X"$file" : 'X\(//\)$' \| \ ++ X"$file" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$file" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ { as_dir=$dirpart/$fdir ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { ++ as_dirs= ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || ++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$as_dir" : 'X\(//\)[^/]' \| \ ++ X"$as_dir" : 'X\(//\)$' \| \ ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$as_dir" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break ++ done ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 ++echo "$as_me: error: cannot create directory $as_dir" >&2;} ++ { (exit 1); exit 1; }; }; } ++ # echo "creating $dirpart/$file" ++ echo '# dummy' > "$dirpart/$file" ++ done ++done ++ ;; ++ "libtool":C) ++ ++ # See if we are running on zsh, and set the options which allow our ++ # commands through without removal of \ escapes. ++ if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++ fi ++ ++ cfgfile="${ofile}T" ++ trap "$RM \"$cfgfile\"; exit 1" 1 2 15 ++ $RM "$cfgfile" ++ ++ cat <<_LT_EOF >> "$cfgfile" ++#! $SHELL ++ ++# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. ++# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION ++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: ++# NOTE: Changes made to this file will be lost: look at ltmain.sh. ++# ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, ++# 2006, 2007, 2008 Free Software Foundation, Inc. ++# Written by Gordon Matzigkeit, 1996 ++# ++# This file is part of GNU Libtool. ++# ++# GNU Libtool is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# As a special exception to the GNU General Public License, ++# if you distribute this file as part of a program or library that ++# is built using GNU Libtool, you may include this file under the ++# same distribution terms that you use for the rest of that program. ++# ++# GNU Libtool is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with GNU Libtool; see the file COPYING. If not, a copy ++# can be downloaded from http://www.gnu.org/licenses/gpl.html, or ++# obtained by writing to the Free Software Foundation, Inc., ++# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ ++ ++# The names of the tagged configurations supported by this script. ++available_tags="" ++ ++# ### BEGIN LIBTOOL CONFIG ++ ++# Which release of libtool.m4 was used? ++macro_version=$macro_version ++macro_revision=$macro_revision ++ ++# Whether or not to build shared libraries. ++build_libtool_libs=$enable_shared ++ ++# Whether or not to build static libraries. ++build_old_libs=$enable_static ++ ++# What type of objects to build. ++pic_mode=$pic_mode ++ ++# Whether or not to optimize for fast installation. ++fast_install=$enable_fast_install ++ ++# The host system. ++host_alias=$host_alias ++host=$host ++host_os=$host_os ++ ++# The build system. ++build_alias=$build_alias ++build=$build ++build_os=$build_os ++ ++# A sed program that does not truncate output. ++SED=$lt_SED ++ ++# Sed that helps us avoid accidentally triggering echo(1) options like -n. ++Xsed="\$SED -e 1s/^X//" ++ ++# A grep program that handles long lines. ++GREP=$lt_GREP ++ ++# An ERE matcher. ++EGREP=$lt_EGREP ++ ++# A literal string matcher. ++FGREP=$lt_FGREP ++ ++# A BSD- or MS-compatible name lister. ++NM=$lt_NM ++ ++# Whether we need soft or hard links. ++LN_S=$lt_LN_S ++ ++# What is the maximum length of a command? ++max_cmd_len=$max_cmd_len ++ ++# Object file suffix (normally "o"). ++objext=$ac_objext ++ ++# Executable file suffix (normally ""). ++exeext=$exeext ++ ++# whether the shell understands "unset". ++lt_unset=$lt_unset ++ ++# turn spaces into newlines. ++SP2NL=$lt_lt_SP2NL ++ ++# turn newlines into spaces. ++NL2SP=$lt_lt_NL2SP ++ ++# How to create reloadable object files. ++reload_flag=$lt_reload_flag ++reload_cmds=$lt_reload_cmds ++ ++# Method to check whether dependent libraries are shared objects. ++deplibs_check_method=$lt_deplibs_check_method ++ ++# Command to use when deplibs_check_method == "file_magic". ++file_magic_cmd=$lt_file_magic_cmd ++ ++# The archiver. ++AR=$lt_AR ++AR_FLAGS=$lt_AR_FLAGS ++ ++# A symbol stripping program. ++STRIP=$lt_STRIP ++ ++# Commands used to install an old-style archive. ++RANLIB=$lt_RANLIB ++old_postinstall_cmds=$lt_old_postinstall_cmds ++old_postuninstall_cmds=$lt_old_postuninstall_cmds ++ ++# A C compiler. ++LTCC=$lt_CC ++ ++# LTCC compiler flags. ++LTCFLAGS=$lt_CFLAGS ++ ++# Take the output of nm and produce a listing of raw symbols and C names. ++global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe ++ ++# Transform the output of nm in a proper C declaration. ++global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl ++ ++# Transform the output of nm in a C name address pair. ++global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address ++ ++# Transform the output of nm in a C name address pair when lib prefix is needed. ++global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix ++ ++# The name of the directory that contains temporary libtool files. ++objdir=$objdir ++ ++# Shell to use when invoking shell scripts. ++SHELL=$lt_SHELL ++ ++# An echo program that does not interpret backslashes. ++ECHO=$lt_ECHO ++ ++# Used to examine libraries when file_magic_cmd begins with "file". ++MAGIC_CMD=$MAGIC_CMD ++ ++# Must we lock files when doing compilation? ++need_locks=$lt_need_locks ++ ++# Tool to manipulate archived DWARF debug symbol files on Mac OS X. ++DSYMUTIL=$lt_DSYMUTIL ++ ++# Tool to change global to local symbols on Mac OS X. ++NMEDIT=$lt_NMEDIT ++ ++# Tool to manipulate fat objects and archives on Mac OS X. ++LIPO=$lt_LIPO ++ ++# ldd/readelf like tool for Mach-O binaries on Mac OS X. ++OTOOL=$lt_OTOOL ++ ++# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. ++OTOOL64=$lt_OTOOL64 ++ ++# Old archive suffix (normally "a"). ++libext=$libext ++ ++# Shared library suffix (normally ".so"). ++shrext_cmds=$lt_shrext_cmds ++ ++# The commands to extract the exported symbol list from a shared archive. ++extract_expsyms_cmds=$lt_extract_expsyms_cmds ++ ++# Variables whose values should be saved in libtool wrapper scripts and ++# restored at link time. ++variables_saved_for_relink=$lt_variables_saved_for_relink ++ ++# Do we need the "lib" prefix for modules? ++need_lib_prefix=$need_lib_prefix ++ ++# Do we need a version for libraries? ++need_version=$need_version ++ ++# Library versioning type. ++version_type=$version_type ++ ++# Shared library runtime path variable. ++runpath_var=$runpath_var ++ ++# Shared library path variable. ++shlibpath_var=$shlibpath_var ++ ++# Is shlibpath searched before the hard-coded library search path? ++shlibpath_overrides_runpath=$shlibpath_overrides_runpath ++ ++# Format of library name prefix. ++libname_spec=$lt_libname_spec ++ ++# List of archive names. First name is the real one, the rest are links. ++# The last name is the one that the linker finds with -lNAME ++library_names_spec=$lt_library_names_spec ++ ++# The coded name of the library, if different from the real name. ++soname_spec=$lt_soname_spec ++ ++# Command to use after installation of a shared archive. ++postinstall_cmds=$lt_postinstall_cmds ++ ++# Command to use after uninstallation of a shared archive. ++postuninstall_cmds=$lt_postuninstall_cmds ++ ++# Commands used to finish a libtool library installation in a directory. ++finish_cmds=$lt_finish_cmds ++ ++# As "finish_cmds", except a single script fragment to be evaled but ++# not shown. ++finish_eval=$lt_finish_eval ++ ++# Whether we should hardcode library paths into libraries. ++hardcode_into_libs=$hardcode_into_libs ++ ++# Compile-time system search path for libraries. ++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec ++ ++# Run-time system search path for libraries. ++sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec ++ ++# Whether dlopen is supported. ++dlopen_support=$enable_dlopen ++ ++# Whether dlopen of programs is supported. ++dlopen_self=$enable_dlopen_self ++ ++# Whether dlopen of statically linked programs is supported. ++dlopen_self_static=$enable_dlopen_self_static ++ ++# Commands to strip libraries. ++old_striplib=$lt_old_striplib ++striplib=$lt_striplib ++ ++ ++# The linker used to build libraries. ++LD=$lt_LD ++ ++# Commands used to build an old-style archive. ++old_archive_cmds=$lt_old_archive_cmds ++ ++# A language specific compiler. ++CC=$lt_compiler ++ ++# Is the compiler the GNU compiler? ++with_gcc=$GCC ++ ++# Compiler flag to turn off builtin functions. ++no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag ++ ++# How to pass a linker flag through the compiler. ++wl=$lt_lt_prog_compiler_wl ++ ++# Additional compiler flags for building library objects. ++pic_flag=$lt_lt_prog_compiler_pic ++ ++# Compiler flag to prevent dynamic linking. ++link_static_flag=$lt_lt_prog_compiler_static ++ ++# Does compiler simultaneously support -c and -o options? ++compiler_c_o=$lt_lt_cv_prog_compiler_c_o ++ ++# Whether or not to add -lc for building shared libraries. ++build_libtool_need_lc=$archive_cmds_need_lc ++ ++# Whether or not to disallow shared libs when runtime libs are static. ++allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes ++ ++# Compiler flag to allow reflexive dlopens. ++export_dynamic_flag_spec=$lt_export_dynamic_flag_spec ++ ++# Compiler flag to generate shared objects directly from archives. ++whole_archive_flag_spec=$lt_whole_archive_flag_spec ++ ++# Whether the compiler copes with passing no objects directly. ++compiler_needs_object=$lt_compiler_needs_object ++ ++# Create an old-style archive from a shared archive. ++old_archive_from_new_cmds=$lt_old_archive_from_new_cmds ++ ++# Create a temporary old-style archive to link instead of a shared archive. ++old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds ++ ++# Commands used to build a shared archive. ++archive_cmds=$lt_archive_cmds ++archive_expsym_cmds=$lt_archive_expsym_cmds ++ ++# Commands used to build a loadable module if different from building ++# a shared archive. ++module_cmds=$lt_module_cmds ++module_expsym_cmds=$lt_module_expsym_cmds ++ ++# Whether we are building with GNU ld or not. ++with_gnu_ld=$lt_with_gnu_ld ++ ++# Flag that allows shared libraries with undefined symbols to be built. ++allow_undefined_flag=$lt_allow_undefined_flag ++ ++# Flag that enforces no undefined symbols. ++no_undefined_flag=$lt_no_undefined_flag ++ ++# Flag to hardcode \$libdir into a binary during linking. ++# This must work even if \$libdir does not exist ++hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec ++ ++# If ld is used when linking, flag to hardcode \$libdir into a binary ++# during linking. This must work even if \$libdir does not exist. ++hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld ++ ++# Whether we need a single "-rpath" flag with a separated argument. ++hardcode_libdir_separator=$lt_hardcode_libdir_separator ++ ++# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes ++# DIR into the resulting binary. ++hardcode_direct=$hardcode_direct ++ ++# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes ++# DIR into the resulting binary and the resulting library dependency is ++# "absolute",i.e impossible to change by setting \${shlibpath_var} if the ++# library is relocated. ++hardcode_direct_absolute=$hardcode_direct_absolute ++ ++# Set to "yes" if using the -LDIR flag during linking hardcodes DIR ++# into the resulting binary. ++hardcode_minus_L=$hardcode_minus_L ++ ++# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR ++# into the resulting binary. ++hardcode_shlibpath_var=$hardcode_shlibpath_var ++ ++# Set to "yes" if building a shared library automatically hardcodes DIR ++# into the library and all subsequent libraries and executables linked ++# against it. ++hardcode_automatic=$hardcode_automatic ++ ++# Set to yes if linker adds runtime paths of dependent libraries ++# to runtime path list. ++inherit_rpath=$inherit_rpath ++ ++# Whether libtool must link a program against all its dependency libraries. ++link_all_deplibs=$link_all_deplibs ++ ++# Fix the shell variable \$srcfile for the compiler. ++fix_srcfile_path=$lt_fix_srcfile_path ++ ++# Set to "yes" if exported symbols are required. ++always_export_symbols=$always_export_symbols ++ ++# The commands to list exported symbols. ++export_symbols_cmds=$lt_export_symbols_cmds ++ ++# Symbols that should not be listed in the preloaded symbols. ++exclude_expsyms=$lt_exclude_expsyms ++ ++# Symbols that must always be exported. ++include_expsyms=$lt_include_expsyms ++ ++# Commands necessary for linking programs (against libraries) with templates. ++prelink_cmds=$lt_prelink_cmds ++ ++# Specify filename containing input files. ++file_list_spec=$lt_file_list_spec ++ ++# How to hardcode a shared library path into an executable. ++hardcode_action=$hardcode_action ++ ++# ### END LIBTOOL CONFIG ++ ++_LT_EOF ++ ++ case $host_os in ++ aix3*) ++ cat <<\_LT_EOF >> "$cfgfile" ++# AIX sometimes has problems with the GCC collect2 program. For some ++# reason, if we set the COLLECT_NAMES environment variable, the problems ++# vanish in a puff of smoke. ++if test "X${COLLECT_NAMES+set}" != Xset; then ++ COLLECT_NAMES= ++ export COLLECT_NAMES ++fi ++_LT_EOF ++ ;; ++ esac ++ ++ ++ltmain="$ac_aux_dir/ltmain.sh" ++ ++ ++ # We use sed instead of cat because bash on DJGPP gets confused if ++ # if finds mixed CR/LF and LF-only lines. Since sed operates in ++ # text mode, it properly converts lines to CR/LF. This bash problem ++ # is reportedly fixed, but why not run on old versions too? ++ sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ ++ || (rm -f "$cfgfile"; exit 1) ++ ++ case $xsi_shell in ++ yes) ++ cat << \_LT_EOF >> "$cfgfile" ++ ++# func_dirname file append nondir_replacement ++# Compute the dirname of FILE. If nonempty, add APPEND to the result, ++# otherwise set result to NONDIR_REPLACEMENT. ++func_dirname () ++{ ++ case ${1} in ++ */*) func_dirname_result="${1%/*}${2}" ;; ++ * ) func_dirname_result="${3}" ;; ++ esac ++} ++ ++# func_basename file ++func_basename () ++{ ++ func_basename_result="${1##*/}" ++} ++ ++# func_dirname_and_basename file append nondir_replacement ++# perform func_basename and func_dirname in a single function ++# call: ++# dirname: Compute the dirname of FILE. If nonempty, ++# add APPEND to the result, otherwise set result ++# to NONDIR_REPLACEMENT. ++# value returned in "$func_dirname_result" ++# basename: Compute filename of FILE. ++# value retuned in "$func_basename_result" ++# Implementation must be kept synchronized with func_dirname ++# and func_basename. For efficiency, we do not delegate to ++# those functions but instead duplicate the functionality here. ++func_dirname_and_basename () ++{ ++ case ${1} in ++ */*) func_dirname_result="${1%/*}${2}" ;; ++ * ) func_dirname_result="${3}" ;; ++ esac ++ func_basename_result="${1##*/}" ++} ++ ++# func_stripname prefix suffix name ++# strip PREFIX and SUFFIX off of NAME. ++# PREFIX and SUFFIX must not contain globbing or regex special ++# characters, hashes, percent signs, but SUFFIX may contain a leading ++# dot (in which case that matches only a dot). ++func_stripname () ++{ ++ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are ++ # positional parameters, so assign one to ordinary parameter first. ++ func_stripname_result=${3} ++ func_stripname_result=${func_stripname_result#"${1}"} ++ func_stripname_result=${func_stripname_result%"${2}"} ++} ++ ++# func_opt_split ++func_opt_split () ++{ ++ func_opt_split_opt=${1%%=*} ++ func_opt_split_arg=${1#*=} ++} ++ ++# func_lo2o object ++func_lo2o () ++{ ++ case ${1} in ++ *.lo) func_lo2o_result=${1%.lo}.${objext} ;; ++ *) func_lo2o_result=${1} ;; ++ esac ++} ++ ++# func_xform libobj-or-source ++func_xform () ++{ ++ func_xform_result=${1%.*}.lo ++} ++ ++# func_arith arithmetic-term... ++func_arith () ++{ ++ func_arith_result=$(( $* )) ++} ++ ++# func_len string ++# STRING may not start with a hyphen. ++func_len () ++{ ++ func_len_result=${#1} ++} ++ ++_LT_EOF ++ ;; ++ *) # Bourne compatible functions. ++ cat << \_LT_EOF >> "$cfgfile" ++ ++# func_dirname file append nondir_replacement ++# Compute the dirname of FILE. If nonempty, add APPEND to the result, ++# otherwise set result to NONDIR_REPLACEMENT. ++func_dirname () ++{ ++ # Extract subdirectory from the argument. ++ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` ++ if test "X$func_dirname_result" = "X${1}"; then ++ func_dirname_result="${3}" ++ else ++ func_dirname_result="$func_dirname_result${2}" ++ fi ++} ++ ++# func_basename file ++func_basename () ++{ ++ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` ++} ++ ++ ++# func_stripname prefix suffix name ++# strip PREFIX and SUFFIX off of NAME. ++# PREFIX and SUFFIX must not contain globbing or regex special ++# characters, hashes, percent signs, but SUFFIX may contain a leading ++# dot (in which case that matches only a dot). ++# func_strip_suffix prefix name ++func_stripname () ++{ ++ case ${2} in ++ .*) func_stripname_result=`$ECHO "X${3}" \ ++ | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; ++ *) func_stripname_result=`$ECHO "X${3}" \ ++ | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; ++ esac ++} ++ ++# sed scripts: ++my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q' ++my_sed_long_arg='1s/^-[^=]*=//' ++ ++# func_opt_split ++func_opt_split () ++{ ++ func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` ++ func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` ++} ++ ++# func_lo2o object ++func_lo2o () ++{ ++ func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` ++} ++ ++# func_xform libobj-or-source ++func_xform () ++{ ++ func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'` ++} ++ ++# func_arith arithmetic-term... ++func_arith () ++{ ++ func_arith_result=`expr "$@"` ++} ++ ++# func_len string ++# STRING may not start with a hyphen. ++func_len () ++{ ++ func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` ++} ++ ++_LT_EOF ++esac ++ ++case $lt_shell_append in ++ yes) ++ cat << \_LT_EOF >> "$cfgfile" ++ ++# func_append var value ++# Append VALUE to the end of shell variable VAR. ++func_append () ++{ ++ eval "$1+=\$2" ++} ++_LT_EOF ++ ;; ++ *) ++ cat << \_LT_EOF >> "$cfgfile" ++ ++# func_append var value ++# Append VALUE to the end of shell variable VAR. ++func_append () ++{ ++ eval "$1=\$$1\$2" ++} ++ ++_LT_EOF ++ ;; ++ esac ++ ++ ++ sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ ++ || (rm -f "$cfgfile"; exit 1) ++ ++ mv -f "$cfgfile" "$ofile" || ++ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") ++ chmod +x "$ofile" ++ ++ ;; ++ "intltool":C) ++ ++for file in intltool-extract intltool-merge intltool-update; do ++ sed -e "s|@INTLTOOL_EXTRACT@|`pwd`/intltool-extract|g" \ ++ -e "s|@INTLTOOL_LIBDIR@|${INTLTOOL_LIBDIR}|g" \ ++ -e "s|@INTLTOOL_PERL@|${INTLTOOL_PERL}|g" \ ++ < ${ac_aux_dir}/${file}.in > ${file}.out ++ if cmp -s ${file} ${file}.out 2>/dev/null; then ++ rm -f ${file}.out ++ else ++ mv -f ${file}.out ${file} ++ fi ++ chmod ugo+x ${file} ++ chmod u+w ${file} ++done ++ ++ ;; ++ "default-1":C) case "$CONFIG_FILES" in *po/Makefile.in*) ++ sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile ++ esac ;; ++ "po/stamp-it":C) ++ rm -f "po/stamp-it" "po/stamp-it.tmp" "po/POTFILES" "po/Makefile.tmp" ++ >"po/stamp-it.tmp" ++ sed '/^#/d ++ s/^[[].*] *// ++ /^[ ]*$/d ++ '"s|^| $ac_top_srcdir/|" \ ++ "$srcdir/po/POTFILES.in" | sed '$!s/$/ \\/' >"po/POTFILES" ++ ++ if test ! -f "po/Makefile"; then ++ { { echo "$as_me:$LINENO: error: po/Makefile is not ready." >&5 ++echo "$as_me: error: po/Makefile is not ready." >&2;} ++ { (exit 1); exit 1; }; } ++ fi ++ mv "po/Makefile" "po/Makefile.tmp" ++ sed '/^POTFILES =/,/[^\\]$/ { ++ /^POTFILES =/!d ++ r po/POTFILES ++ } ++ ' "po/Makefile.tmp" >"po/Makefile" ++ rm -f "po/Makefile.tmp" ++ mv "po/stamp-it.tmp" "po/stamp-it" ++ ;; ++ ++ esac ++done # for ac_tag ++ ++ ++{ (exit 0); exit 0; } ++_ACEOF ++chmod +x $CONFIG_STATUS ++ac_clean_files=$ac_clean_files_save ++ ++ ++# configure is writing to config.log, and then calls config.status. ++# config.status does its own redirection, appending to config.log. ++# Unfortunately, on DOS this fails, as config.log is still kept open ++# by configure, so config.status won't be able to write to it; its ++# output is simply discarded. So we exec the FD to /dev/null, ++# effectively closing config.log, so it can be properly (re)opened and ++# appended to by config.status. When coming back to configure, we ++# need to make the FD available again. ++if test "$no_create" != yes; then ++ ac_cs_success=: ++ ac_config_status_args= ++ test "$silent" = yes && ++ ac_config_status_args="$ac_config_status_args --quiet" ++ exec 5>/dev/null ++ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false ++ exec 5>>config.log ++ # Use ||, not &&, to avoid exiting from the if with $? = 1, which ++ # would make configure fail if this is the last instruction. ++ $ac_cs_success || { (exit 1); exit 1; } ++fi ++ ++ ++echo " ++ GNOME Power Manager $VERSION ++ ============================= ++ ++ prefix: ${prefix} ++ datadir: ${datadir} ++ compiler: ${CC} ++ cflags: ${CFLAGS} ++ libnotify support: ${have_libnotify} ++ unique support: ${have_unique} ++ Building extra applets: ${enable_applets} ++ DPMS support: ${have_dpms} ++ PolicyKit support: ${have_polkit} ++ XEVENTS support: ${have_xevents} ++ Self test support: ${have_tests} ++ GConf default support: ${have_gconfdefaults} ++ Docbook support: ${enable_docbook_docs} ++ documentation dir: $DOCDIR ++ dbus-1 system.d dir: $DBUS_SYS_DIR ++ dbus-1 services dir: $DBUS_SERVICES_DIR ++ gconf-schema dir: $GCONF_SCHEMA_FILE_DIR ++" ++ +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/autom4te.cache/output.1 gnome-power-manager-2.24.0.new/autom4te.cache/output.1 +--- gnome-power-manager-2.24.0/autom4te.cache/output.1 1970-01-01 01:00:00.000000000 +0100 ++++ gnome-power-manager-2.24.0.new/autom4te.cache/output.1 2008-11-20 18:37:23.000000000 +0100 +@@ -0,0 +1,19955 @@ ++@%:@! /bin/sh ++@%:@ Guess values for system-dependent variables and create Makefiles. ++@%:@ Generated by GNU Autoconf 2.61 for gnome-power-manager 2.24.0. ++@%:@ ++@%:@ Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, ++@%:@ 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. ++@%:@ This configure script is free software; the Free Software Foundation ++@%:@ gives unlimited permission to copy, distribute and modify it. ++## --------------------- ## ++## M4sh Initialization. ## ++## --------------------- ## ++ ++# Be more Bourne compatible ++DUALCASE=1; export DUALCASE # for MKS sh ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++ ++ ++# PATH needs CR ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits ++ ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ echo "#! /bin/sh" >conf$$.sh ++ echo "exit 0" >>conf$$.sh ++ chmod +x conf$$.sh ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then ++ PATH_SEPARATOR=';' ++ else ++ PATH_SEPARATOR=: ++ fi ++ rm -f conf$$.sh ++fi ++ ++# Support unset when possible. ++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then ++ as_unset=unset ++else ++ as_unset=false ++fi ++ ++ ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++as_nl=' ++' ++IFS=" "" $as_nl" ++ ++# Find who we are. Look in the path if we contain no directory separator. ++case $0 in ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 ++fi ++if test ! -f "$as_myself"; then ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ { (exit 1); exit 1; } ++fi ++ ++# Work around bugs in pre-3.0 UWIN ksh. ++for as_var in ENV MAIL MAILPATH ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++done ++PS1='$ ' ++PS2='> ' ++PS4='+ ' ++ ++# NLS nuisances. ++for as_var in \ ++ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ ++ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ ++ LC_TELEPHONE LC_TIME ++do ++ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then ++ eval $as_var=C; export $as_var ++ else ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++ fi ++done ++ ++# Required to use basename. ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then ++ as_expr=expr ++else ++ as_expr=false ++fi ++ ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then ++ as_basename=basename ++else ++ as_basename=false ++fi ++ ++ ++# Name of the executable. ++as_me=`$as_basename -- "$0" || ++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ ++ X"$0" : 'X\(//\)$' \| \ ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || ++echo X/"$0" | ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ ++# CDPATH. ++$as_unset CDPATH ++ ++ ++if test "x$CONFIG_SHELL" = x; then ++ if (eval ":") 2>/dev/null; then ++ as_have_required=yes ++else ++ as_have_required=no ++fi ++ ++ if test $as_have_required = yes && (eval ": ++(as_func_return () { ++ (exit \$1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} ++ ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. ++fi ++ ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi ++ ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi ++ ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test \$exitcode = 0) || { (exit 1); exit 1; } ++ ++( ++ as_lineno_1=\$LINENO ++ as_lineno_2=\$LINENO ++ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && ++ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } ++") 2> /dev/null; then ++ : ++else ++ as_candidate_shells= ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ case $as_dir in ++ /*) ++ for as_base in sh bash ksh sh5; do ++ as_candidate_shells="$as_candidate_shells $as_dir/$as_base" ++ done;; ++ esac ++done ++IFS=$as_save_IFS ++ ++ ++ for as_shell in $as_candidate_shells $SHELL; do ++ # Try only shells that exist, to save several forks. ++ if { test -f "$as_shell" || test -f "$as_shell.exe"; } && ++ { ("$as_shell") 2> /dev/null <<\_ASEOF ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++: ++_ASEOF ++}; then ++ CONFIG_SHELL=$as_shell ++ as_have_required=yes ++ if { "$as_shell" 2> /dev/null <<\_ASEOF ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++: ++(as_func_return () { ++ (exit $1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} ++ ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. ++fi ++ ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi ++ ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi ++ ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = "$1" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test $exitcode = 0) || { (exit 1); exit 1; } ++ ++( ++ as_lineno_1=$LINENO ++ as_lineno_2=$LINENO ++ test "x$as_lineno_1" != "x$as_lineno_2" && ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } ++ ++_ASEOF ++}; then ++ break ++fi ++ ++fi ++ ++ done ++ ++ if test "x$CONFIG_SHELL" != x; then ++ for as_var in BASH_ENV ENV ++ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++ done ++ export CONFIG_SHELL ++ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} ++fi ++ ++ ++ if test $as_have_required = no; then ++ echo This script requires a shell more modern than all the ++ echo shells that I found on your system. Please install a ++ echo modern shell, or manually run the script under such a ++ echo shell if you do have one. ++ { (exit 1); exit 1; } ++fi ++ ++ ++fi ++ ++fi ++ ++ ++ ++(eval "as_func_return () { ++ (exit \$1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} ++ ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. ++fi ++ ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi ++ ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi ++ ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test \$exitcode = 0") || { ++ echo No shell found that supports shell functions. ++ echo Please tell autoconf@gnu.org about your system, ++ echo including any error possibly output before this ++ echo message ++} ++ ++ ++ ++ as_lineno_1=$LINENO ++ as_lineno_2=$LINENO ++ test "x$as_lineno_1" != "x$as_lineno_2" && ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { ++ ++ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO ++ # uniformly replaced by the line number. The first 'sed' inserts a ++ # line-number line after each line using $LINENO; the second 'sed' ++ # does the real work. The second script uses 'N' to pair each ++ # line-number line with the line containing $LINENO, and appends ++ # trailing '-' during substitution so that $LINENO is not a special ++ # case at line end. ++ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the ++ # scripts with optimization help from Paolo Bonzini. Blame Lee ++ # E. McMahon (1931-1989) for sed's syntax. :-) ++ sed -n ' ++ p ++ /[$]LINENO/= ++ ' <$as_myself | ++ sed ' ++ s/[$]LINENO.*/&-/ ++ t lineno ++ b ++ :lineno ++ N ++ :loop ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ ++ t loop ++ s/-\n.*// ++ ' >$as_me.lineno && ++ chmod +x "$as_me.lineno" || ++ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 ++ { (exit 1); exit 1; }; } ++ ++ # Don't try to exec as it changes $[0], causing all sort of problems ++ # (the dirname of $[0] is not the place where we might find the ++ # original and so on. Autoconf is especially sensitive to this). ++ . "./$as_me.lineno" ++ # Exit status is that of the last command. ++ exit ++} ++ ++ ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false ++fi ++ ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in ++-n*) ++ case `echo 'x\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ *) ECHO_C='\c';; ++ esac;; ++*) ++ ECHO_N='-n';; ++esac ++ ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then ++ as_expr=expr ++else ++ as_expr=false ++fi ++ ++rm -f conf$$ conf$$.exe conf$$.file ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file ++else ++ rm -f conf$$.dir ++ mkdir conf$$.dir ++fi ++echo >conf$$.file ++if ln -s conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || ++ as_ln_s='cp -p' ++elif ln conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s=ln ++else ++ as_ln_s='cp -p' ++fi ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null ++ ++if mkdir -p . 2>/dev/null; then ++ as_mkdir_p=: ++else ++ test -d ./-p && rmdir ./-p ++ as_mkdir_p=false ++fi ++ ++if test -x / >/dev/null 2>&1; then ++ as_test_x='test -x' ++else ++ if ls -dL / >/dev/null 2>&1; then ++ as_ls_L_option=L ++ else ++ as_ls_L_option= ++ fi ++ as_test_x=' ++ eval sh -c '\'' ++ if test -d "$1"; then ++ test -d "$1/."; ++ else ++ case $1 in ++ -*)set "./$1";; ++ esac; ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ++ ???[sx]*):;;*)false;;esac;fi ++ '\'' sh ++ ' ++fi ++as_executable_p=$as_test_x ++ ++# Sed expression to map a string onto a valid CPP name. ++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" ++ ++# Sed expression to map a string onto a valid variable name. ++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" ++ ++ ++ ++ ++# Check that we are running under the correct shell. ++SHELL=${CONFIG_SHELL-/bin/sh} ++ ++case X$lt_ECHO in ++X*--fallback-echo) ++ # Remove one level of quotation (which was required for Make). ++ ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','` ++ ;; ++esac ++ ++ECHO=${lt_ECHO-echo} ++if test "X$1" = X--no-reexec; then ++ # Discard the --no-reexec flag, and continue. ++ shift ++elif test "X$1" = X--fallback-echo; then ++ # Avoid inline document here, it may be left over ++ : ++elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then ++ # Yippee, $ECHO works! ++ : ++else ++ # Restart under the correct shell. ++ exec $SHELL "$0" --no-reexec ${1+"$@"} ++fi ++ ++if test "X$1" = X--fallback-echo; then ++ # used as fallback echo ++ shift ++ cat <<_LT_EOF ++$* ++_LT_EOF ++ exit 0 ++fi ++ ++# The HP-UX ksh and POSIX shell print the target directory to stdout ++# if CDPATH is set. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++ ++if test -z "$lt_ECHO"; then ++ if test "X${echo_test_string+set}" != Xset; then ++ # find a string as large as possible, as long as the shell can cope with it ++ for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do ++ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... ++ if { echo_test_string=`eval $cmd`; } 2>/dev/null && ++ { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null ++ then ++ break ++ fi ++ done ++ fi ++ ++ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ : ++ else ++ # The Solaris, AIX, and Digital Unix default echo programs unquote ++ # backslashes. This makes it impossible to quote backslashes using ++ # echo "$something" | sed 's/\\/\\\\/g' ++ # ++ # So, first we look for a working echo in the user's PATH. ++ ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for dir in $PATH /usr/ucb; do ++ IFS="$lt_save_ifs" ++ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && ++ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ ECHO="$dir/echo" ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ++ if test "X$ECHO" = Xecho; then ++ # We didn't find a better echo, so look for alternatives. ++ if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ # This shell has a builtin print -r that does the trick. ++ ECHO='print -r' ++ elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && ++ test "X$CONFIG_SHELL" != X/bin/ksh; then ++ # If we have ksh, try running configure again with it. ++ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} ++ export ORIGINAL_CONFIG_SHELL ++ CONFIG_SHELL=/bin/ksh ++ export CONFIG_SHELL ++ exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} ++ else ++ # Try using printf. ++ ECHO='printf %s\n' ++ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ # Cool, printf works ++ : ++ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && ++ test "X$echo_testing_string" = 'X\t' && ++ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL ++ export CONFIG_SHELL ++ SHELL="$CONFIG_SHELL" ++ export SHELL ++ ECHO="$CONFIG_SHELL $0 --fallback-echo" ++ elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && ++ test "X$echo_testing_string" = 'X\t' && ++ echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ ECHO="$CONFIG_SHELL $0 --fallback-echo" ++ else ++ # maybe with a smaller string... ++ prev=: ++ ++ for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do ++ if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null ++ then ++ break ++ fi ++ prev="$cmd" ++ done ++ ++ if test "$prev" != 'sed 50q "$0"'; then ++ echo_test_string=`eval $prev` ++ export echo_test_string ++ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} ++ else ++ # Oops. We lost completely, so just stick with echo. ++ ECHO=echo ++ fi ++ fi ++ fi ++ fi ++ fi ++fi ++ ++# Copy echo and quote the copy suitably for passing to libtool from ++# the Makefile, instead of quoting the original, which is used later. ++lt_ECHO=$ECHO ++if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then ++ lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" ++fi ++ ++ ++ ++ ++exec 7<&0 &1 ++ ++# Name of the host. ++# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, ++# so uname gets run too. ++ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` ++ ++# ++# Initializations. ++# ++ac_default_prefix=/usr/local ++ac_clean_files= ++ac_config_libobj_dir=. ++LIB@&t@OBJS= ++cross_compiling=no ++subdirs= ++MFLAGS= ++MAKEFLAGS= ++SHELL=${CONFIG_SHELL-/bin/sh} ++ ++# Identity of this package. ++PACKAGE_NAME='gnome-power-manager' ++PACKAGE_TARNAME='gnome-power-manager' ++PACKAGE_VERSION='2.24.0' ++PACKAGE_STRING='gnome-power-manager 2.24.0' ++PACKAGE_BUGREPORT='' ++ ++ac_unique_file="src" ++# Factoring default headers for most tests. ++ac_includes_default="\ ++#include ++#ifdef HAVE_SYS_TYPES_H ++# include ++#endif ++#ifdef HAVE_SYS_STAT_H ++# include ++#endif ++#ifdef STDC_HEADERS ++# include ++# include ++#else ++# ifdef HAVE_STDLIB_H ++# include ++# endif ++#endif ++#ifdef HAVE_STRING_H ++# if !defined STDC_HEADERS && defined HAVE_MEMORY_H ++# include ++# endif ++# include ++#endif ++#ifdef HAVE_STRINGS_H ++# include ++#endif ++#ifdef HAVE_INTTYPES_H ++# include ++#endif ++#ifdef HAVE_STDINT_H ++# include ++#endif ++#ifdef HAVE_UNISTD_H ++# include ++#endif" ++ ++ac_subst_vars='SHELL ++PATH_SEPARATOR ++PACKAGE_NAME ++PACKAGE_TARNAME ++PACKAGE_VERSION ++PACKAGE_STRING ++PACKAGE_BUGREPORT ++exec_prefix ++prefix ++program_transform_name ++bindir ++sbindir ++libexecdir ++datarootdir ++datadir ++sysconfdir ++sharedstatedir ++localstatedir ++includedir ++oldincludedir ++docdir ++infodir ++htmldir ++dvidir ++pdfdir ++psdir ++libdir ++localedir ++mandir ++DEFS ++ECHO_C ++ECHO_N ++ECHO_T ++LIBS ++build_alias ++host_alias ++target_alias ++INSTALL_PROGRAM ++INSTALL_SCRIPT ++INSTALL_DATA ++CYGPATH_W ++PACKAGE ++VERSION ++ACLOCAL ++AUTOCONF ++AUTOMAKE ++AUTOHEADER ++MAKEINFO ++install_sh ++STRIP ++INSTALL_STRIP_PROGRAM ++mkdir_p ++AWK ++SET_MAKE ++am__leading_dot ++AMTAR ++am__tar ++am__untar ++CC ++CFLAGS ++LDFLAGS ++CPPFLAGS ++ac_ct_CC ++EXEEXT ++OBJEXT ++DEPDIR ++am__include ++am__quote ++AMDEP_TRUE ++AMDEP_FALSE ++AMDEPBACKSLASH ++CCDEPMODE ++am__fastdepCC_TRUE ++am__fastdepCC_FALSE ++LIBTOOL ++build ++build_cpu ++build_vendor ++build_os ++host ++host_cpu ++host_vendor ++host_os ++SED ++GREP ++EGREP ++FGREP ++LD ++DUMPBIN ++ac_ct_DUMPBIN ++NM ++LN_S ++AR ++RANLIB ++lt_ECHO ++DSYMUTIL ++NMEDIT ++LIPO ++OTOOL ++OTOOL64 ++CPP ++INTLTOOL_DESKTOP_RULE ++INTLTOOL_DIRECTORY_RULE ++INTLTOOL_KEYS_RULE ++INTLTOOL_PROP_RULE ++INTLTOOL_OAF_RULE ++INTLTOOL_PONG_RULE ++INTLTOOL_SERVER_RULE ++INTLTOOL_SHEET_RULE ++INTLTOOL_SOUNDLIST_RULE ++INTLTOOL_UI_RULE ++INTLTOOL_XAM_RULE ++INTLTOOL_KBD_RULE ++INTLTOOL_XML_RULE ++INTLTOOL_XML_NOMERGE_RULE ++INTLTOOL_CAVES_RULE ++INTLTOOL_SCHEMAS_RULE ++INTLTOOL_THEME_RULE ++INTLTOOL_SERVICE_RULE ++INTLTOOL_POLICY_RULE ++XGETTEXT ++MSGMERGE ++MSGFMT ++INTLTOOL_EXTRACT ++INTLTOOL_MERGE ++INTLTOOL_UPDATE ++INTLTOOL_PERL ++ALL_LINGUAS ++DATADIRNAME ++WARN_CFLAGS ++PKG_CONFIG ++HELP_DIR ++OMF_DIR ++DOC_USER_FORMATS ++ENABLE_SK_TRUE ++ENABLE_SK_FALSE ++DISTCHECK_CONFIGURE_FLAGS ++HAVE_GNOME_DOC_UTILS_TRUE ++HAVE_GNOME_DOC_UTILS_FALSE ++GLIB_GENMARSHAL ++GETTEXT_PACKAGE ++USE_NLS ++MSGFMT_OPTS ++GMSGFMT ++CATALOGS ++CATOBJEXT ++GMOFILES ++INSTOBJEXT ++INTLLIBS ++PO_IN_DATADIR_TRUE ++PO_IN_DATADIR_FALSE ++POFILES ++POSUB ++MKINSTALLDIRS ++GLIB_REQUIRED ++GTK_REQUIRED ++GDK_REQUIRED ++LIBGNOME_REQUIRED ++LIBGNOMEUI_REQUIRED ++HAL_REQUIRED ++DBUS_REQUIRED ++LIBGLADE_REQUIRED ++LIBNOTIFY_REQUIRED ++LIBWNCK_REQUIRED ++CAIRO_REQUIRED ++UNIQUE_REQUIRED ++LIBPANEL_REQUIRED ++GSTREAMER_REQUIRED ++XRANDR_REQUIRED ++POLKIT_GNOME_REQUIRED ++GLIB_CFLAGS ++GLIB_LIBS ++HAL_CFLAGS ++HAL_LIBS ++GSTREAMER_CFLAGS ++GSTREAMER_LIBS ++DBUS_CFLAGS ++DBUS_LIBS ++GNOME_CFLAGS ++GNOME_LIBS ++GDK_CFLAGS ++GDK_LIBS ++XRANDR_CFLAGS ++XRANDR_LIBS ++GCONFTOOL ++GCONF_SCHEMA_CONFIG_SOURCE ++GCONF_SCHEMA_FILE_DIR ++GCONF_SCHEMAS_INSTALL_TRUE ++GCONF_SCHEMAS_INSTALL_FALSE ++XMKMF ++X_CFLAGS ++X_PRE_LIBS ++X_LIBS ++X_EXTRA_LIBS ++SYSCONFDIR ++DATADIR ++BINDIR ++SBINDIR ++DOCDIR ++POLKIT_CFLAGS ++POLKIT_LIBS ++HAVE_TESTS_TRUE ++HAVE_TESTS_FALSE ++POLKIT_GNOME_CFLAGS ++POLKIT_GNOME_LIBS ++HAVE_GCONF_DEFAULTS_TRUE ++HAVE_GCONF_DEFAULTS_FALSE ++HAVE_APPLETS_TRUE ++HAVE_APPLETS_FALSE ++XMLTO ++DOCBOOK_DOCS_ENABLED_TRUE ++DOCBOOK_DOCS_ENABLED_FALSE ++DBUS_SERVICES_DIR ++LIBNOTIFY_CFLAGS ++LIBNOTIFY_LIBS ++HAVE_LIBNOTIFY_TRUE ++HAVE_LIBNOTIFY_FALSE ++UNIQUE_CFLAGS ++UNIQUE_LIBS ++HAVE_UNIQUE_TRUE ++HAVE_UNIQUE_FALSE ++GPM_EXTRA_LIBS ++DOCBOOK2MAN ++HAVE_DOCBOOK2MAN_TRUE ++HAVE_DOCBOOK2MAN_FALSE ++LIB@&t@OBJS ++LTLIBOBJS' ++ac_subst_files='' ++ ac_precious_vars='build_alias ++host_alias ++target_alias ++CC ++CFLAGS ++LDFLAGS ++LIBS ++CPPFLAGS ++CPP ++PKG_CONFIG ++GLIB_CFLAGS ++GLIB_LIBS ++HAL_CFLAGS ++HAL_LIBS ++GSTREAMER_CFLAGS ++GSTREAMER_LIBS ++DBUS_CFLAGS ++DBUS_LIBS ++GNOME_CFLAGS ++GNOME_LIBS ++GDK_CFLAGS ++GDK_LIBS ++XRANDR_CFLAGS ++XRANDR_LIBS ++XMKMF ++POLKIT_CFLAGS ++POLKIT_LIBS ++POLKIT_GNOME_CFLAGS ++POLKIT_GNOME_LIBS ++LIBNOTIFY_CFLAGS ++LIBNOTIFY_LIBS ++UNIQUE_CFLAGS ++UNIQUE_LIBS' ++ ++ ++# Initialize some variables set by options. ++ac_init_help= ++ac_init_version=false ++# The variables have the same names as the options, with ++# dashes changed to underlines. ++cache_file=/dev/null ++exec_prefix=NONE ++no_create= ++no_recursion= ++prefix=NONE ++program_prefix=NONE ++program_suffix=NONE ++program_transform_name=s,x,x, ++silent= ++site= ++srcdir= ++verbose= ++x_includes=NONE ++x_libraries=NONE ++ ++# Installation directory options. ++# These are left unexpanded so users can "make install exec_prefix=/foo" ++# and all the variables that are supposed to be based on exec_prefix ++# by default will actually change. ++# Use braces instead of parens because sh, perl, etc. also accept them. ++# (The list follows the same order as the GNU Coding Standards.) ++bindir='${exec_prefix}/bin' ++sbindir='${exec_prefix}/sbin' ++libexecdir='${exec_prefix}/libexec' ++datarootdir='${prefix}/share' ++datadir='${datarootdir}' ++sysconfdir='${prefix}/etc' ++sharedstatedir='${prefix}/com' ++localstatedir='${prefix}/var' ++includedir='${prefix}/include' ++oldincludedir='/usr/include' ++docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' ++infodir='${datarootdir}/info' ++htmldir='${docdir}' ++dvidir='${docdir}' ++pdfdir='${docdir}' ++psdir='${docdir}' ++libdir='${exec_prefix}/lib' ++localedir='${datarootdir}/locale' ++mandir='${datarootdir}/man' ++ ++ac_prev= ++ac_dashdash= ++for ac_option ++do ++ # If the previous option needs an argument, assign it. ++ if test -n "$ac_prev"; then ++ eval $ac_prev=\$ac_option ++ ac_prev= ++ continue ++ fi ++ ++ case $ac_option in ++ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; ++ *) ac_optarg=yes ;; ++ esac ++ ++ # Accept the important Cygnus configure options, so we can diagnose typos. ++ ++ case $ac_dashdash$ac_option in ++ --) ++ ac_dashdash=yes ;; ++ ++ -bindir | --bindir | --bindi | --bind | --bin | --bi) ++ ac_prev=bindir ;; ++ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) ++ bindir=$ac_optarg ;; ++ ++ -build | --build | --buil | --bui | --bu) ++ ac_prev=build_alias ;; ++ -build=* | --build=* | --buil=* | --bui=* | --bu=*) ++ build_alias=$ac_optarg ;; ++ ++ -cache-file | --cache-file | --cache-fil | --cache-fi \ ++ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ++ ac_prev=cache_file ;; ++ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ ++ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) ++ cache_file=$ac_optarg ;; ++ ++ --config-cache | -C) ++ cache_file=config.cache ;; ++ ++ -datadir | --datadir | --datadi | --datad) ++ ac_prev=datadir ;; ++ -datadir=* | --datadir=* | --datadi=* | --datad=*) ++ datadir=$ac_optarg ;; ++ ++ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ ++ | --dataroo | --dataro | --datar) ++ ac_prev=datarootdir ;; ++ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ ++ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) ++ datarootdir=$ac_optarg ;; ++ ++ -disable-* | --disable-*) ++ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` ++ # Reject names that are not valid shell variable names. ++ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid feature name: $ac_feature" >&2 ++ { (exit 1); exit 1; }; } ++ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` ++ eval enable_$ac_feature=no ;; ++ ++ -docdir | --docdir | --docdi | --doc | --do) ++ ac_prev=docdir ;; ++ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) ++ docdir=$ac_optarg ;; ++ ++ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ++ ac_prev=dvidir ;; ++ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) ++ dvidir=$ac_optarg ;; ++ ++ -enable-* | --enable-*) ++ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` ++ # Reject names that are not valid shell variable names. ++ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid feature name: $ac_feature" >&2 ++ { (exit 1); exit 1; }; } ++ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` ++ eval enable_$ac_feature=\$ac_optarg ;; ++ ++ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ ++ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ ++ | --exec | --exe | --ex) ++ ac_prev=exec_prefix ;; ++ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ ++ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ ++ | --exec=* | --exe=* | --ex=*) ++ exec_prefix=$ac_optarg ;; ++ ++ -gas | --gas | --ga | --g) ++ # Obsolete; use --with-gas. ++ with_gas=yes ;; ++ ++ -help | --help | --hel | --he | -h) ++ ac_init_help=long ;; ++ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ++ ac_init_help=recursive ;; ++ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ++ ac_init_help=short ;; ++ ++ -host | --host | --hos | --ho) ++ ac_prev=host_alias ;; ++ -host=* | --host=* | --hos=* | --ho=*) ++ host_alias=$ac_optarg ;; ++ ++ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ++ ac_prev=htmldir ;; ++ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ ++ | --ht=*) ++ htmldir=$ac_optarg ;; ++ ++ -includedir | --includedir | --includedi | --included | --include \ ++ | --includ | --inclu | --incl | --inc) ++ ac_prev=includedir ;; ++ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ ++ | --includ=* | --inclu=* | --incl=* | --inc=*) ++ includedir=$ac_optarg ;; ++ ++ -infodir | --infodir | --infodi | --infod | --info | --inf) ++ ac_prev=infodir ;; ++ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) ++ infodir=$ac_optarg ;; ++ ++ -libdir | --libdir | --libdi | --libd) ++ ac_prev=libdir ;; ++ -libdir=* | --libdir=* | --libdi=* | --libd=*) ++ libdir=$ac_optarg ;; ++ ++ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ ++ | --libexe | --libex | --libe) ++ ac_prev=libexecdir ;; ++ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ ++ | --libexe=* | --libex=* | --libe=*) ++ libexecdir=$ac_optarg ;; ++ ++ -localedir | --localedir | --localedi | --localed | --locale) ++ ac_prev=localedir ;; ++ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) ++ localedir=$ac_optarg ;; ++ ++ -localstatedir | --localstatedir | --localstatedi | --localstated \ ++ | --localstate | --localstat | --localsta | --localst | --locals) ++ ac_prev=localstatedir ;; ++ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ ++ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) ++ localstatedir=$ac_optarg ;; ++ ++ -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ++ ac_prev=mandir ;; ++ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) ++ mandir=$ac_optarg ;; ++ ++ -nfp | --nfp | --nf) ++ # Obsolete; use --without-fp. ++ with_fp=no ;; ++ ++ -no-create | --no-create | --no-creat | --no-crea | --no-cre \ ++ | --no-cr | --no-c | -n) ++ no_create=yes ;; ++ ++ -no-recursion | --no-recursion | --no-recursio | --no-recursi \ ++ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ++ no_recursion=yes ;; ++ ++ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ ++ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ ++ | --oldin | --oldi | --old | --ol | --o) ++ ac_prev=oldincludedir ;; ++ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ ++ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ ++ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) ++ oldincludedir=$ac_optarg ;; ++ ++ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ++ ac_prev=prefix ;; ++ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) ++ prefix=$ac_optarg ;; ++ ++ -program-prefix | --program-prefix | --program-prefi | --program-pref \ ++ | --program-pre | --program-pr | --program-p) ++ ac_prev=program_prefix ;; ++ -program-prefix=* | --program-prefix=* | --program-prefi=* \ ++ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) ++ program_prefix=$ac_optarg ;; ++ ++ -program-suffix | --program-suffix | --program-suffi | --program-suff \ ++ | --program-suf | --program-su | --program-s) ++ ac_prev=program_suffix ;; ++ -program-suffix=* | --program-suffix=* | --program-suffi=* \ ++ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) ++ program_suffix=$ac_optarg ;; ++ ++ -program-transform-name | --program-transform-name \ ++ | --program-transform-nam | --program-transform-na \ ++ | --program-transform-n | --program-transform- \ ++ | --program-transform | --program-transfor \ ++ | --program-transfo | --program-transf \ ++ | --program-trans | --program-tran \ ++ | --progr-tra | --program-tr | --program-t) ++ ac_prev=program_transform_name ;; ++ -program-transform-name=* | --program-transform-name=* \ ++ | --program-transform-nam=* | --program-transform-na=* \ ++ | --program-transform-n=* | --program-transform-=* \ ++ | --program-transform=* | --program-transfor=* \ ++ | --program-transfo=* | --program-transf=* \ ++ | --program-trans=* | --program-tran=* \ ++ | --progr-tra=* | --program-tr=* | --program-t=*) ++ program_transform_name=$ac_optarg ;; ++ ++ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ++ ac_prev=pdfdir ;; ++ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) ++ pdfdir=$ac_optarg ;; ++ ++ -psdir | --psdir | --psdi | --psd | --ps) ++ ac_prev=psdir ;; ++ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) ++ psdir=$ac_optarg ;; ++ ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ++ | -silent | --silent | --silen | --sile | --sil) ++ silent=yes ;; ++ ++ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ++ ac_prev=sbindir ;; ++ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ ++ | --sbi=* | --sb=*) ++ sbindir=$ac_optarg ;; ++ ++ -sharedstatedir | --sharedstatedir | --sharedstatedi \ ++ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ ++ | --sharedst | --shareds | --shared | --share | --shar \ ++ | --sha | --sh) ++ ac_prev=sharedstatedir ;; ++ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ ++ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ ++ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ ++ | --sha=* | --sh=*) ++ sharedstatedir=$ac_optarg ;; ++ ++ -site | --site | --sit) ++ ac_prev=site ;; ++ -site=* | --site=* | --sit=*) ++ site=$ac_optarg ;; ++ ++ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ++ ac_prev=srcdir ;; ++ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) ++ srcdir=$ac_optarg ;; ++ ++ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ ++ | --syscon | --sysco | --sysc | --sys | --sy) ++ ac_prev=sysconfdir ;; ++ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ ++ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) ++ sysconfdir=$ac_optarg ;; ++ ++ -target | --target | --targe | --targ | --tar | --ta | --t) ++ ac_prev=target_alias ;; ++ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) ++ target_alias=$ac_optarg ;; ++ ++ -v | -verbose | --verbose | --verbos | --verbo | --verb) ++ verbose=yes ;; ++ ++ -version | --version | --versio | --versi | --vers | -V) ++ ac_init_version=: ;; ++ ++ -with-* | --with-*) ++ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` ++ # Reject names that are not valid shell variable names. ++ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid package name: $ac_package" >&2 ++ { (exit 1); exit 1; }; } ++ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` ++ eval with_$ac_package=\$ac_optarg ;; ++ ++ -without-* | --without-*) ++ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` ++ # Reject names that are not valid shell variable names. ++ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid package name: $ac_package" >&2 ++ { (exit 1); exit 1; }; } ++ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` ++ eval with_$ac_package=no ;; ++ ++ --x) ++ # Obsolete; use --with-x. ++ with_x=yes ;; ++ ++ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ ++ | --x-incl | --x-inc | --x-in | --x-i) ++ ac_prev=x_includes ;; ++ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ ++ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) ++ x_includes=$ac_optarg ;; ++ ++ -x-libraries | --x-libraries | --x-librarie | --x-librari \ ++ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ++ ac_prev=x_libraries ;; ++ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ ++ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) ++ x_libraries=$ac_optarg ;; ++ ++ -*) { echo "$as_me: error: unrecognized option: $ac_option ++Try \`$0 --help' for more information." >&2 ++ { (exit 1); exit 1; }; } ++ ;; ++ ++ *=*) ++ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` ++ # Reject names that are not valid shell variable names. ++ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 ++ { (exit 1); exit 1; }; } ++ eval $ac_envvar=\$ac_optarg ++ export $ac_envvar ;; ++ ++ *) ++ # FIXME: should be removed in autoconf 3.0. ++ echo "$as_me: WARNING: you should use --build, --host, --target" >&2 ++ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ echo "$as_me: WARNING: invalid host type: $ac_option" >&2 ++ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ++ ;; ++ ++ esac ++done ++ ++if test -n "$ac_prev"; then ++ ac_option=--`echo $ac_prev | sed 's/_/-/g'` ++ { echo "$as_me: error: missing argument to $ac_option" >&2 ++ { (exit 1); exit 1; }; } ++fi ++ ++# Be sure to have absolute directory names. ++for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ ++ datadir sysconfdir sharedstatedir localstatedir includedir \ ++ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ ++ libdir localedir mandir ++do ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ [\\/$]* | ?:[\\/]* ) continue;; ++ NONE | '' ) case $ac_var in *prefix ) continue;; esac;; ++ esac ++ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 ++ { (exit 1); exit 1; }; } ++done ++ ++# There might be people who depend on the old broken behavior: `$host' ++# used to hold the argument of --host etc. ++# FIXME: To remove some day. ++build=$build_alias ++host=$host_alias ++target=$target_alias ++ ++# FIXME: To remove some day. ++if test "x$host_alias" != x; then ++ if test "x$build_alias" = x; then ++ cross_compiling=maybe ++ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. ++ If a cross compiler is detected then cross compile mode will be used." >&2 ++ elif test "x$build_alias" != "x$host_alias"; then ++ cross_compiling=yes ++ fi ++fi ++ ++ac_tool_prefix= ++test -n "$host_alias" && ac_tool_prefix=$host_alias- ++ ++test "$silent" = yes && exec 6>/dev/null ++ ++ ++ac_pwd=`pwd` && test -n "$ac_pwd" && ++ac_ls_di=`ls -di .` && ++ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || ++ { echo "$as_me: error: Working directory cannot be determined" >&2 ++ { (exit 1); exit 1; }; } ++test "X$ac_ls_di" = "X$ac_pwd_ls_di" || ++ { echo "$as_me: error: pwd does not report name of working directory" >&2 ++ { (exit 1); exit 1; }; } ++ ++ ++# Find the source files, if location was not specified. ++if test -z "$srcdir"; then ++ ac_srcdir_defaulted=yes ++ # Try the directory containing this script, then the parent directory. ++ ac_confdir=`$as_dirname -- "$0" || ++$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$0" : 'X\(//\)[^/]' \| \ ++ X"$0" : 'X\(//\)$' \| \ ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$0" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ srcdir=$ac_confdir ++ if test ! -r "$srcdir/$ac_unique_file"; then ++ srcdir=.. ++ fi ++else ++ ac_srcdir_defaulted=no ++fi ++if test ! -r "$srcdir/$ac_unique_file"; then ++ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." ++ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 ++ { (exit 1); exit 1; }; } ++fi ++ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ++ac_abs_confdir=`( ++ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 ++ { (exit 1); exit 1; }; } ++ pwd)` ++# When building in place, set srcdir=. ++if test "$ac_abs_confdir" = "$ac_pwd"; then ++ srcdir=. ++fi ++# Remove unnecessary trailing slashes from srcdir. ++# Double slashes in file names in object file debugging info ++# mess up M-x gdb in Emacs. ++case $srcdir in ++*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; ++esac ++for ac_var in $ac_precious_vars; do ++ eval ac_env_${ac_var}_set=\${${ac_var}+set} ++ eval ac_env_${ac_var}_value=\$${ac_var} ++ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} ++ eval ac_cv_env_${ac_var}_value=\$${ac_var} ++done ++ ++# ++# Report the --help message. ++# ++if test "$ac_init_help" = "long"; then ++ # Omit some internal or obsolete options to make the list less imposing. ++ # This message is too long to be a string in the A/UX 3.1 sh. ++ cat <<_ACEOF ++\`configure' configures gnome-power-manager 2.24.0 to adapt to many kinds of systems. ++ ++Usage: $0 [OPTION]... [VAR=VALUE]... ++ ++To assign environment variables (e.g., CC, CFLAGS...), specify them as ++VAR=VALUE. See below for descriptions of some of the useful variables. ++ ++Defaults for the options are specified in brackets. ++ ++Configuration: ++ -h, --help display this help and exit ++ --help=short display options specific to this package ++ --help=recursive display the short help of all the included packages ++ -V, --version display version information and exit ++ -q, --quiet, --silent do not print \`checking...' messages ++ --cache-file=FILE cache test results in FILE [disabled] ++ -C, --config-cache alias for \`--cache-file=config.cache' ++ -n, --no-create do not create output files ++ --srcdir=DIR find the sources in DIR [configure dir or \`..'] ++ ++Installation directories: ++ --prefix=PREFIX install architecture-independent files in PREFIX ++ [$ac_default_prefix] ++ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX ++ [PREFIX] ++ ++By default, \`make install' will install all the files in ++\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify ++an installation prefix other than \`$ac_default_prefix' using \`--prefix', ++for instance \`--prefix=\$HOME'. ++ ++For better control, use the options below. ++ ++Fine tuning of the installation directories: ++ --bindir=DIR user executables [EPREFIX/bin] ++ --sbindir=DIR system admin executables [EPREFIX/sbin] ++ --libexecdir=DIR program executables [EPREFIX/libexec] ++ --sysconfdir=DIR read-only single-machine data [PREFIX/etc] ++ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] ++ --localstatedir=DIR modifiable single-machine data [PREFIX/var] ++ --libdir=DIR object code libraries [EPREFIX/lib] ++ --includedir=DIR C header files [PREFIX/include] ++ --oldincludedir=DIR C header files for non-gcc [/usr/include] ++ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] ++ --datadir=DIR read-only architecture-independent data [DATAROOTDIR] ++ --infodir=DIR info documentation [DATAROOTDIR/info] ++ --localedir=DIR locale-dependent data [DATAROOTDIR/locale] ++ --mandir=DIR man documentation [DATAROOTDIR/man] ++ --docdir=DIR documentation root @<:@DATAROOTDIR/doc/gnome-power-manager@:>@ ++ --htmldir=DIR html documentation [DOCDIR] ++ --dvidir=DIR dvi documentation [DOCDIR] ++ --pdfdir=DIR pdf documentation [DOCDIR] ++ --psdir=DIR ps documentation [DOCDIR] ++_ACEOF ++ ++ cat <<\_ACEOF ++ ++Program names: ++ --program-prefix=PREFIX prepend PREFIX to installed program names ++ --program-suffix=SUFFIX append SUFFIX to installed program names ++ --program-transform-name=PROGRAM run sed PROGRAM on installed program names ++ ++X features: ++ --x-includes=DIR X include files are in DIR ++ --x-libraries=DIR X library files are in DIR ++ ++System types: ++ --build=BUILD configure for building on BUILD [guessed] ++ --host=HOST cross-compile to build programs to run on HOST [BUILD] ++_ACEOF ++fi ++ ++if test -n "$ac_init_help"; then ++ case $ac_init_help in ++ short | recursive ) echo "Configuration of gnome-power-manager 2.24.0:";; ++ esac ++ cat <<\_ACEOF ++ ++Optional Features: ++ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) ++ --enable-FEATURE[=ARG] include FEATURE [ARG=yes] ++ --disable-dependency-tracking speeds up one-time build ++ --enable-dependency-tracking do not reject slow dependency extractors ++ --enable-shared@<:@=PKGS@:>@ build shared libraries @<:@default=yes@:>@ ++ --enable-static@<:@=PKGS@:>@ build static libraries @<:@default=yes@:>@ ++ --enable-fast-install@<:@=PKGS@:>@ ++ optimize for fast installation @<:@default=yes@:>@ ++ --disable-libtool-lock avoid locking (might break parallel builds) ++ --enable-compile-warnings=@<:@no/minimum/yes/maximum/error@:>@ ++ Turn on compiler warnings ++ --enable-iso-c Try to warn if code is not ISO C ++ --disable-scrollkeeper do not make updates to the scrollkeeper database ++ --disable-schemas-install Disable the schemas installation ++ --enable-policykit support PolicyKit permissions daemon (requires ++ polkitd) ++ --enable-checkfg Use check-foreground-console (Ubuntu systems) ++ --disable-xevents Support XEVENTS (requires a new x.org) ++ --enable-tests Build self tests ++ --disable-gconf-defaults ++ Allow setting gconf default settings ++ --disable-applets Build the extra power applets ++ --enable-docbook-docs build documentation (requires xmlto) ++ --enable-more-warnings Maximum compiler warnings ++ ++Optional Packages: ++ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] ++ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) ++ --with-pic try to use only PIC/non-PIC objects @<:@default=use ++ both@:>@ ++ --with-gnu-ld assume the C compiler uses GNU ld @<:@default=no@:>@ ++ --with-help-dir=DIR path to help docs ++ --with-omf-dir=DIR path to OMF files ++ --with-help-formats=FORMATS ++ list of formats ++ --with-gconf-source=sourceaddress ++ Config database for installing schema files. ++ --with-gconf-schema-file-dir=dir ++ Directory for installing schema files. ++ --with-x use the X Window System ++ --with-doc-dir= directory to install documentation ++ --with-dbus-services= ++ where D-BUS services directory is ++ --without-dpms-ext Include support for the DPMS extension. ++ ++Some influential environment variables: ++ CC C compiler command ++ CFLAGS C compiler flags ++ LDFLAGS linker flags, e.g. -L if you have libraries in a ++ nonstandard directory ++ LIBS libraries to pass to the linker, e.g. -l ++ CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if ++ you have headers in a nonstandard directory ++ CPP C preprocessor ++ PKG_CONFIG path to pkg-config utility ++ GLIB_CFLAGS C compiler flags for GLIB, overriding pkg-config ++ GLIB_LIBS linker flags for GLIB, overriding pkg-config ++ HAL_CFLAGS C compiler flags for HAL, overriding pkg-config ++ HAL_LIBS linker flags for HAL, overriding pkg-config ++ GSTREAMER_CFLAGS ++ C compiler flags for GSTREAMER, overriding pkg-config ++ GSTREAMER_LIBS ++ linker flags for GSTREAMER, overriding pkg-config ++ DBUS_CFLAGS C compiler flags for DBUS, overriding pkg-config ++ DBUS_LIBS linker flags for DBUS, overriding pkg-config ++ GNOME_CFLAGS ++ C compiler flags for GNOME, overriding pkg-config ++ GNOME_LIBS linker flags for GNOME, overriding pkg-config ++ GDK_CFLAGS C compiler flags for GDK, overriding pkg-config ++ GDK_LIBS linker flags for GDK, overriding pkg-config ++ XRANDR_CFLAGS ++ C compiler flags for XRANDR, overriding pkg-config ++ XRANDR_LIBS linker flags for XRANDR, overriding pkg-config ++ XMKMF Path to xmkmf, Makefile generator for X Window System ++ POLKIT_CFLAGS ++ C compiler flags for POLKIT, overriding pkg-config ++ POLKIT_LIBS linker flags for POLKIT, overriding pkg-config ++ POLKIT_GNOME_CFLAGS ++ C compiler flags for POLKIT_GNOME, overriding pkg-config ++ POLKIT_GNOME_LIBS ++ linker flags for POLKIT_GNOME, overriding pkg-config ++ LIBNOTIFY_CFLAGS ++ C compiler flags for LIBNOTIFY, overriding pkg-config ++ LIBNOTIFY_LIBS ++ linker flags for LIBNOTIFY, overriding pkg-config ++ UNIQUE_CFLAGS ++ C compiler flags for UNIQUE, overriding pkg-config ++ UNIQUE_LIBS linker flags for UNIQUE, overriding pkg-config ++ ++Use these variables to override the choices made by `configure' or to help ++it to find libraries and programs with nonstandard names/locations. ++ ++_ACEOF ++ac_status=$? ++fi ++ ++if test "$ac_init_help" = "recursive"; then ++ # If there are subdirs, report their specific --help. ++ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue ++ test -d "$ac_dir" || continue ++ ac_builddir=. ++ ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) ++ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; ++esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix ++ ++case $srcdir in ++ .) # We are building in place. ++ ac_srcdir=. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. ++ ac_srcdir=$srcdir$ac_dir_suffix; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; ++esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix ++ ++ cd "$ac_dir" || { ac_status=$?; continue; } ++ # Check for guested configure. ++ if test -f "$ac_srcdir/configure.gnu"; then ++ echo && ++ $SHELL "$ac_srcdir/configure.gnu" --help=recursive ++ elif test -f "$ac_srcdir/configure"; then ++ echo && ++ $SHELL "$ac_srcdir/configure" --help=recursive ++ else ++ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 ++ fi || ac_status=$? ++ cd "$ac_pwd" || { ac_status=$?; break; } ++ done ++fi ++ ++test -n "$ac_init_help" && exit $ac_status ++if $ac_init_version; then ++ cat <<\_ACEOF ++gnome-power-manager configure 2.24.0 ++generated by GNU Autoconf 2.61 ++ ++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, ++2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. ++This configure script is free software; the Free Software Foundation ++gives unlimited permission to copy, distribute and modify it. ++_ACEOF ++ exit ++fi ++cat >config.log <<_ACEOF ++This file contains any messages produced by compilers while ++running configure, to aid debugging if configure makes a mistake. ++ ++It was created by gnome-power-manager $as_me 2.24.0, which was ++generated by GNU Autoconf 2.61. Invocation command line was ++ ++ $ $0 $@ ++ ++_ACEOF ++exec 5>>config.log ++{ ++cat <<_ASUNAME ++@%:@@%:@ --------- @%:@@%:@ ++@%:@@%:@ Platform. @%:@@%:@ ++@%:@@%:@ --------- @%:@@%:@ ++ ++hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` ++uname -m = `(uname -m) 2>/dev/null || echo unknown` ++uname -r = `(uname -r) 2>/dev/null || echo unknown` ++uname -s = `(uname -s) 2>/dev/null || echo unknown` ++uname -v = `(uname -v) 2>/dev/null || echo unknown` ++ ++/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` ++/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` ++ ++/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` ++/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` ++/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` ++/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` ++/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` ++/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` ++/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` ++ ++_ASUNAME ++ ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ echo "PATH: $as_dir" ++done ++IFS=$as_save_IFS ++ ++} >&5 ++ ++cat >&5 <<_ACEOF ++ ++ ++@%:@@%:@ ----------- @%:@@%:@ ++@%:@@%:@ Core tests. @%:@@%:@ ++@%:@@%:@ ----------- @%:@@%:@ ++ ++_ACEOF ++ ++ ++# Keep a trace of the command line. ++# Strip out --no-create and --no-recursion so they do not pile up. ++# Strip out --silent because we don't want to record it for future runs. ++# Also quote any args containing shell meta-characters. ++# Make two passes to allow for proper duplicate-argument suppression. ++ac_configure_args= ++ac_configure_args0= ++ac_configure_args1= ++ac_must_keep_next=false ++for ac_pass in 1 2 ++do ++ for ac_arg ++ do ++ case $ac_arg in ++ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ++ | -silent | --silent | --silen | --sile | --sil) ++ continue ;; ++ *\'*) ++ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; ++ esac ++ case $ac_pass in ++ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; ++ 2) ++ ac_configure_args1="$ac_configure_args1 '$ac_arg'" ++ if test $ac_must_keep_next = true; then ++ ac_must_keep_next=false # Got value, back to normal. ++ else ++ case $ac_arg in ++ *=* | --config-cache | -C | -disable-* | --disable-* \ ++ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ ++ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ ++ | -with-* | --with-* | -without-* | --without-* | --x) ++ case "$ac_configure_args0 " in ++ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; ++ esac ++ ;; ++ -* ) ac_must_keep_next=true ;; ++ esac ++ fi ++ ac_configure_args="$ac_configure_args '$ac_arg'" ++ ;; ++ esac ++ done ++done ++$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } ++$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } ++ ++# When interrupted or exit'd, cleanup temporary files, and complete ++# config.log. We remove comments because anyway the quotes in there ++# would cause problems or look ugly. ++# WARNING: Use '\'' to represent an apostrophe within the trap. ++# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. ++trap 'exit_status=$? ++ # Save into config.log some information that might help in debugging. ++ { ++ echo ++ ++ cat <<\_ASBOX ++@%:@@%:@ ---------------- @%:@@%:@ ++@%:@@%:@ Cache variables. @%:@@%:@ ++@%:@@%:@ ---------------- @%:@@%:@ ++_ASBOX ++ echo ++ # The following way of writing the cache mishandles newlines in values, ++( ++ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ *) $as_unset $ac_var ;; ++ esac ;; ++ esac ++ done ++ (set) 2>&1 | ++ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) ++ sed -n \ ++ "s/'\''/'\''\\\\'\'''\''/g; ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ++ ;; #( ++ *) ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ++ ;; ++ esac | ++ sort ++) ++ echo ++ ++ cat <<\_ASBOX ++@%:@@%:@ ----------------- @%:@@%:@ ++@%:@@%:@ Output variables. @%:@@%:@ ++@%:@@%:@ ----------------- @%:@@%:@ ++_ASBOX ++ echo ++ for ac_var in $ac_subst_vars ++ do ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ esac ++ echo "$ac_var='\''$ac_val'\''" ++ done | sort ++ echo ++ ++ if test -n "$ac_subst_files"; then ++ cat <<\_ASBOX ++@%:@@%:@ ------------------- @%:@@%:@ ++@%:@@%:@ File substitutions. @%:@@%:@ ++@%:@@%:@ ------------------- @%:@@%:@ ++_ASBOX ++ echo ++ for ac_var in $ac_subst_files ++ do ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ esac ++ echo "$ac_var='\''$ac_val'\''" ++ done | sort ++ echo ++ fi ++ ++ if test -s confdefs.h; then ++ cat <<\_ASBOX ++@%:@@%:@ ----------- @%:@@%:@ ++@%:@@%:@ confdefs.h. @%:@@%:@ ++@%:@@%:@ ----------- @%:@@%:@ ++_ASBOX ++ echo ++ cat confdefs.h ++ echo ++ fi ++ test "$ac_signal" != 0 && ++ echo "$as_me: caught signal $ac_signal" ++ echo "$as_me: exit $exit_status" ++ } >&5 ++ rm -f core *.core core.conftest.* && ++ rm -f -r conftest* confdefs* conf$$* $ac_clean_files && ++ exit $exit_status ++' 0 ++for ac_signal in 1 2 13 15; do ++ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal ++done ++ac_signal=0 ++ ++# confdefs.h avoids OS command line length limits that DEFS can exceed. ++rm -f -r conftest* confdefs.h ++ ++# Predefined preprocessor variables. ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE_NAME "$PACKAGE_NAME" ++_ACEOF ++ ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE_TARNAME "$PACKAGE_TARNAME" ++_ACEOF ++ ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE_VERSION "$PACKAGE_VERSION" ++_ACEOF ++ ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE_STRING "$PACKAGE_STRING" ++_ACEOF ++ ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" ++_ACEOF ++ ++ ++# Let the site file select an alternate cache file if it wants to. ++# Prefer explicitly selected file to automatically selected ones. ++if test -n "$CONFIG_SITE"; then ++ set x "$CONFIG_SITE" ++elif test "x$prefix" != xNONE; then ++ set x "$prefix/share/config.site" "$prefix/etc/config.site" ++else ++ set x "$ac_default_prefix/share/config.site" \ ++ "$ac_default_prefix/etc/config.site" ++fi ++shift ++for ac_site_file ++do ++ if test -r "$ac_site_file"; then ++ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 ++echo "$as_me: loading site script $ac_site_file" >&6;} ++ sed 's/^/| /' "$ac_site_file" >&5 ++ . "$ac_site_file" ++ fi ++done ++ ++if test -r "$cache_file"; then ++ # Some versions of bash will fail to source /dev/null (special ++ # files actually), so we avoid doing that. ++ if test -f "$cache_file"; then ++ { echo "$as_me:$LINENO: loading cache $cache_file" >&5 ++echo "$as_me: loading cache $cache_file" >&6;} ++ case $cache_file in ++ [\\/]* | ?:[\\/]* ) . "$cache_file";; ++ *) . "./$cache_file";; ++ esac ++ fi ++else ++ { echo "$as_me:$LINENO: creating cache $cache_file" >&5 ++echo "$as_me: creating cache $cache_file" >&6;} ++ >$cache_file ++fi ++ ++# Check that the precious variables saved in the cache have kept the same ++# value. ++ac_cache_corrupted=false ++for ac_var in $ac_precious_vars; do ++ eval ac_old_set=\$ac_cv_env_${ac_var}_set ++ eval ac_new_set=\$ac_env_${ac_var}_set ++ eval ac_old_val=\$ac_cv_env_${ac_var}_value ++ eval ac_new_val=\$ac_env_${ac_var}_value ++ case $ac_old_set,$ac_new_set in ++ set,) ++ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 ++echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ++ ac_cache_corrupted=: ;; ++ ,set) ++ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 ++echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ++ ac_cache_corrupted=: ;; ++ ,);; ++ *) ++ if test "x$ac_old_val" != "x$ac_new_val"; then ++ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 ++echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ++ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 ++echo "$as_me: former value: $ac_old_val" >&2;} ++ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 ++echo "$as_me: current value: $ac_new_val" >&2;} ++ ac_cache_corrupted=: ++ fi;; ++ esac ++ # Pass precious variables to config.status. ++ if test "$ac_new_set" = set; then ++ case $ac_new_val in ++ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; ++ *) ac_arg=$ac_var=$ac_new_val ;; ++ esac ++ case " $ac_configure_args " in ++ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. ++ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; ++ esac ++ fi ++done ++if $ac_cache_corrupted; then ++ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 ++echo "$as_me: error: changes in the environment can compromise the build" >&2;} ++ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 ++echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++ ++ ++am__api_version="1.9" ++ac_aux_dir= ++for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do ++ if test -f "$ac_dir/install-sh"; then ++ ac_aux_dir=$ac_dir ++ ac_install_sh="$ac_aux_dir/install-sh -c" ++ break ++ elif test -f "$ac_dir/install.sh"; then ++ ac_aux_dir=$ac_dir ++ ac_install_sh="$ac_aux_dir/install.sh -c" ++ break ++ elif test -f "$ac_dir/shtool"; then ++ ac_aux_dir=$ac_dir ++ ac_install_sh="$ac_aux_dir/shtool install -c" ++ break ++ fi ++done ++if test -z "$ac_aux_dir"; then ++ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 ++echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++# These three variables are undocumented and unsupported, ++# and are intended to be withdrawn in a future Autoconf release. ++# They can cause serious problems if a builder's source tree is in a directory ++# whose full name contains unusual characters. ++ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ++ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ++ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. ++ ++ ++# Find a good install program. We prefer a C program (faster), ++# so one script is as good as another. But avoid the broken or ++# incompatible versions: ++# SysV /etc/install, /usr/sbin/install ++# SunOS /usr/etc/install ++# IRIX /sbin/install ++# AIX /bin/install ++# AmigaOS /C/install, which installs bootblocks on floppy discs ++# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag ++# AFS /usr/afsws/bin/install, which mishandles nonexistent args ++# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" ++# OS/2's system install, which has a completely different semantic ++# ./install, which can be erroneously created by make from ./install.sh. ++{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 ++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } ++if test -z "$INSTALL"; then ++if test "${ac_cv_path_install+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ # Account for people who put trailing slashes in PATH elements. ++case $as_dir/ in ++ ./ | .// | /cC/* | \ ++ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ++ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ ++ /usr/ucb/* ) ;; ++ *) ++ # OSF1 and SCO ODT 3.0 have their own names for install. ++ # Don't use installbsd from OSF since it installs stuff as root ++ # by default. ++ for ac_prog in ginstall scoinst install; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then ++ if test $ac_prog = install && ++ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then ++ # AIX install. It has an incompatible calling convention. ++ : ++ elif test $ac_prog = install && ++ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then ++ # program-specific install script used by HP pwplus--don't use. ++ : ++ else ++ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" ++ break 3 ++ fi ++ fi ++ done ++ done ++ ;; ++esac ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ if test "${ac_cv_path_install+set}" = set; then ++ INSTALL=$ac_cv_path_install ++ else ++ # As a last resort, use the slow shell script. Don't cache a ++ # value for INSTALL within a source directory, because that will ++ # break other packages using the cache if that directory is ++ # removed, or if the value is a relative name. ++ INSTALL=$ac_install_sh ++ fi ++fi ++{ echo "$as_me:$LINENO: result: $INSTALL" >&5 ++echo "${ECHO_T}$INSTALL" >&6; } ++ ++# Use test -z because SunOS4 sh mishandles braces in ${var-val}. ++# It thinks the first close brace ends the variable substitution. ++test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' ++ ++test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' ++ ++test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' ++ ++{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5 ++echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } ++# Just in case ++sleep 1 ++echo timestamp > conftest.file ++# Do `set' in a subshell so we don't clobber the current shell's ++# arguments. Must try -L first in case configure is actually a ++# symlink; some systems play weird games with the mod time of symlinks ++# (eg FreeBSD returns the mod time of the symlink's containing ++# directory). ++if ( ++ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` ++ if test "$*" = "X"; then ++ # -L didn't work. ++ set X `ls -t $srcdir/configure conftest.file` ++ fi ++ rm -f conftest.file ++ if test "$*" != "X $srcdir/configure conftest.file" \ ++ && test "$*" != "X conftest.file $srcdir/configure"; then ++ ++ # If neither matched, then we have a broken ls. This can happen ++ # if, for instance, CONFIG_SHELL is bash and it inherits a ++ # broken ls alias from the environment. This has actually ++ # happened. Such a system could not be considered "sane". ++ { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken ++alias in your environment" >&5 ++echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken ++alias in your environment" >&2;} ++ { (exit 1); exit 1; }; } ++ fi ++ ++ test "$2" = conftest.file ++ ) ++then ++ # Ok. ++ : ++else ++ { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! ++Check your system clock" >&5 ++echo "$as_me: error: newly created file is older than distributed files! ++Check your system clock" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++{ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++test "$program_prefix" != NONE && ++ program_transform_name="s&^&$program_prefix&;$program_transform_name" ++# Use a double $ so make ignores it. ++test "$program_suffix" != NONE && ++ program_transform_name="s&\$&$program_suffix&;$program_transform_name" ++# Double any \ or $. echo might interpret backslashes. ++# By default was `s,x,x', remove it if useless. ++cat <<\_ACEOF >conftest.sed ++s/[\\$]/&&/g;s/;s,x,x,$// ++_ACEOF ++program_transform_name=`echo $program_transform_name | sed -f conftest.sed` ++rm -f conftest.sed ++ ++# expand $ac_aux_dir to an absolute path ++am_aux_dir=`cd $ac_aux_dir && pwd` ++ ++test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" ++# Use eval to expand $SHELL ++if eval "$MISSING --run true"; then ++ am_missing_run="$MISSING --run " ++else ++ am_missing_run= ++ { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 ++echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} ++fi ++ ++if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then ++ # We used to keeping the `.' as first argument, in order to ++ # allow $(mkdir_p) to be used without argument. As in ++ # $(mkdir_p) $(somedir) ++ # where $(somedir) is conditionally defined. However this is wrong ++ # for two reasons: ++ # 1. if the package is installed by a user who cannot write `.' ++ # make install will fail, ++ # 2. the above comment should most certainly read ++ # $(mkdir_p) $(DESTDIR)$(somedir) ++ # so it does not work when $(somedir) is undefined and ++ # $(DESTDIR) is not. ++ # To support the latter case, we have to write ++ # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), ++ # so the `.' trick is pointless. ++ mkdir_p='mkdir -p --' ++else ++ # On NextStep and OpenStep, the `mkdir' command does not ++ # recognize any option. It will interpret all options as ++ # directories to create, and then abort because `.' already ++ # exists. ++ for d in ./-p ./--version; ++ do ++ test -d $d && rmdir $d ++ done ++ # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. ++ if test -f "$ac_aux_dir/mkinstalldirs"; then ++ mkdir_p='$(mkinstalldirs)' ++ else ++ mkdir_p='$(install_sh) -d' ++ fi ++fi ++ ++for ac_prog in gawk mawk nawk awk ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_AWK+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$AWK"; then ++ ac_cv_prog_AWK="$AWK" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_AWK="$ac_prog" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++AWK=$ac_cv_prog_AWK ++if test -n "$AWK"; then ++ { echo "$as_me:$LINENO: result: $AWK" >&5 ++echo "${ECHO_T}$AWK" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ test -n "$AWK" && break ++done ++ ++{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 ++echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } ++set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` ++if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.make <<\_ACEOF ++SHELL = /bin/sh ++all: ++ @echo '@@@%%%=$(MAKE)=@@@%%%' ++_ACEOF ++# GNU make sometimes prints "make[1]: Entering...", which would confuse us. ++case `${MAKE-make} -f conftest.make 2>/dev/null` in ++ *@@@%%%=?*=@@@%%%*) ++ eval ac_cv_prog_make_${ac_make}_set=yes;; ++ *) ++ eval ac_cv_prog_make_${ac_make}_set=no;; ++esac ++rm -f conftest.make ++fi ++if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ SET_MAKE= ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ SET_MAKE="MAKE=${MAKE-make}" ++fi ++ ++rm -rf .tst 2>/dev/null ++mkdir .tst 2>/dev/null ++if test -d .tst; then ++ am__leading_dot=. ++else ++ am__leading_dot=_ ++fi ++rmdir .tst 2>/dev/null ++ ++# test to see if srcdir already configured ++if test "`cd $srcdir && pwd`" != "`pwd`" && ++ test -f $srcdir/config.status; then ++ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 ++echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++# test whether we have cygpath ++if test -z "$CYGPATH_W"; then ++ if (cygpath --version) >/dev/null 2>/dev/null; then ++ CYGPATH_W='cygpath -w' ++ else ++ CYGPATH_W=echo ++ fi ++fi ++ ++ ++# Define the identity of the package. ++ PACKAGE=gnome-power-manager ++ VERSION=2.24.0 ++ ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE "$PACKAGE" ++_ACEOF ++ ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define VERSION "$VERSION" ++_ACEOF ++ ++# Some tools Automake needs. ++ ++ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} ++ ++ ++AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} ++ ++ ++AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} ++ ++ ++AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} ++ ++ ++MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} ++ ++install_sh=${install_sh-"$am_aux_dir/install-sh"} ++ ++# Installed binaries are usually stripped using `strip' when the user ++# run `make install-strip'. However `strip' might not be the right ++# tool to use in cross-compilation environments, therefore Automake ++# will honor the `STRIP' environment variable to overrule this program. ++if test "$cross_compiling" != no; then ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. ++set dummy ${ac_tool_prefix}strip; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_STRIP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$STRIP"; then ++ ac_cv_prog_STRIP="$STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_STRIP="${ac_tool_prefix}strip" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++STRIP=$ac_cv_prog_STRIP ++if test -n "$STRIP"; then ++ { echo "$as_me:$LINENO: result: $STRIP" >&5 ++echo "${ECHO_T}$STRIP" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_STRIP"; then ++ ac_ct_STRIP=$STRIP ++ # Extract the first word of "strip", so it can be a program name with args. ++set dummy strip; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_STRIP"; then ++ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_STRIP="strip" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP ++if test -n "$ac_ct_STRIP"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 ++echo "${ECHO_T}$ac_ct_STRIP" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_STRIP" = x; then ++ STRIP=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ STRIP=$ac_ct_STRIP ++ fi ++else ++ STRIP="$ac_cv_prog_STRIP" ++fi ++ ++fi ++INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" ++ ++# We need awk for the "check" target. The system "awk" is bad on ++# some platforms. ++# Always define AMTAR for backward compatibility. ++ ++AMTAR=${AMTAR-"${am_missing_run}tar"} ++ ++am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' ++ ++ ++ ++ ++ ++ac_config_headers="$ac_config_headers config.h" ++ ++ ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. ++set dummy ${ac_tool_prefix}gcc; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_CC+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$CC"; then ++ ac_cv_prog_CC="$CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_CC="${ac_tool_prefix}gcc" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++CC=$ac_cv_prog_CC ++if test -n "$CC"; then ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_CC"; then ++ ac_ct_CC=$CC ++ # Extract the first word of "gcc", so it can be a program name with args. ++set dummy gcc; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_CC+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_CC"; then ++ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_CC="gcc" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_CC=$ac_cv_prog_ac_ct_CC ++if test -n "$ac_ct_CC"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_CC" = x; then ++ CC="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ CC=$ac_ct_CC ++ fi ++else ++ CC="$ac_cv_prog_CC" ++fi ++ ++if test -z "$CC"; then ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. ++set dummy ${ac_tool_prefix}cc; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_CC+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$CC"; then ++ ac_cv_prog_CC="$CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_CC="${ac_tool_prefix}cc" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++CC=$ac_cv_prog_CC ++if test -n "$CC"; then ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ fi ++fi ++if test -z "$CC"; then ++ # Extract the first word of "cc", so it can be a program name with args. ++set dummy cc; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_CC+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$CC"; then ++ ac_cv_prog_CC="$CC" # Let the user override the test. ++else ++ ac_prog_rejected=no ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ++ ac_prog_rejected=yes ++ continue ++ fi ++ ac_cv_prog_CC="cc" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++if test $ac_prog_rejected = yes; then ++ # We found a bogon in the path, so make sure we never use it. ++ set dummy $ac_cv_prog_CC ++ shift ++ if test $@%:@ != 0; then ++ # We chose a different compiler from the bogus one. ++ # However, it has the same basename, so the bogon will be chosen ++ # first if we set CC to just the basename; use the full file name. ++ shift ++ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" ++ fi ++fi ++fi ++fi ++CC=$ac_cv_prog_CC ++if test -n "$CC"; then ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$CC"; then ++ if test -n "$ac_tool_prefix"; then ++ for ac_prog in cl.exe ++ do ++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. ++set dummy $ac_tool_prefix$ac_prog; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_CC+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$CC"; then ++ ac_cv_prog_CC="$CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_CC="$ac_tool_prefix$ac_prog" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++CC=$ac_cv_prog_CC ++if test -n "$CC"; then ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ test -n "$CC" && break ++ done ++fi ++if test -z "$CC"; then ++ ac_ct_CC=$CC ++ for ac_prog in cl.exe ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_CC+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_CC"; then ++ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_CC="$ac_prog" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_CC=$ac_cv_prog_ac_ct_CC ++if test -n "$ac_ct_CC"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ test -n "$ac_ct_CC" && break ++done ++ ++ if test "x$ac_ct_CC" = x; then ++ CC="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ CC=$ac_ct_CC ++ fi ++fi ++ ++fi ++ ++ ++test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH ++See \`config.log' for more details." >&5 ++echo "$as_me: error: no acceptable C compiler found in \$PATH ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++ ++# Provide some information about the compiler. ++echo "$as_me:$LINENO: checking for C compiler version" >&5 ++ac_compiler=`set X $ac_compile; echo $2` ++{ (ac_try="$ac_compiler --version >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler --version >&5") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++{ (ac_try="$ac_compiler -v >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -v >&5") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++{ (ac_try="$ac_compiler -V >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -V >&5") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++ ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++ac_clean_files_save=$ac_clean_files ++ac_clean_files="$ac_clean_files a.out a.exe b.out" ++# Try to create an executable without -o first, disregard a.out. ++# It will help us diagnose broken compilers, and finding out an intuition ++# of exeext. ++{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 ++echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; } ++ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` ++# ++# List of possible output files, starting from the most likely. ++# The algorithm is not robust to junk in `.', hence go to wildcards (a.*) ++# only as a last resort. b.out is created by i960 compilers. ++ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out' ++# ++# The IRIX 6 linker writes into existing files which may not be ++# executable, retaining their permissions. Remove them first so a ++# subsequent execution test works. ++ac_rmfiles= ++for ac_file in $ac_files ++do ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; ++ * ) ac_rmfiles="$ac_rmfiles $ac_file";; ++ esac ++done ++rm -f $ac_rmfiles ++ ++if { (ac_try="$ac_link_default" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link_default") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. ++# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' ++# in a Makefile. We should not override ac_cv_exeext if it was cached, ++# so that the user can short-circuit this test for compilers unknown to ++# Autoconf. ++for ac_file in $ac_files '' ++do ++ test -f "$ac_file" || continue ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ++ ;; ++ [ab].out ) ++ # We found the default executable, but exeext='' is most ++ # certainly right. ++ break;; ++ *.* ) ++ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; ++ then :; else ++ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` ++ fi ++ # We set ac_cv_exeext here because the later test for it is not ++ # safe: cross compilers may not add the suffix if given an `-o' ++ # argument, so we may need to know it at that point already. ++ # Even if this section looks crufty: it has the advantage of ++ # actually working. ++ break;; ++ * ) ++ break;; ++ esac ++done ++test "$ac_cv_exeext" = no && ac_cv_exeext= ++ ++else ++ ac_file='' ++fi ++ ++{ echo "$as_me:$LINENO: result: $ac_file" >&5 ++echo "${ECHO_T}$ac_file" >&6; } ++if test -z "$ac_file"; then ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++{ { echo "$as_me:$LINENO: error: C compiler cannot create executables ++See \`config.log' for more details." >&5 ++echo "$as_me: error: C compiler cannot create executables ++See \`config.log' for more details." >&2;} ++ { (exit 77); exit 77; }; } ++fi ++ ++ac_exeext=$ac_cv_exeext ++ ++# Check that the compiler produces executables we can run. If not, either ++# the compiler is broken, or we cross compile. ++{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5 ++echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; } ++# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 ++# If not cross compiling, check that we can run a simple program. ++if test "$cross_compiling" != yes; then ++ if { ac_try='./$ac_file' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ cross_compiling=no ++ else ++ if test "$cross_compiling" = maybe; then ++ cross_compiling=yes ++ else ++ { { echo "$as_me:$LINENO: error: cannot run C compiled programs. ++If you meant to cross compile, use \`--host'. ++See \`config.log' for more details." >&5 ++echo "$as_me: error: cannot run C compiled programs. ++If you meant to cross compile, use \`--host'. ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++ fi ++ fi ++fi ++{ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ ++rm -f a.out a.exe conftest$ac_cv_exeext b.out ++ac_clean_files=$ac_clean_files_save ++# Check that the compiler produces executables we can run. If not, either ++# the compiler is broken, or we cross compile. ++{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 ++echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; } ++{ echo "$as_me:$LINENO: result: $cross_compiling" >&5 ++echo "${ECHO_T}$cross_compiling" >&6; } ++ ++{ echo "$as_me:$LINENO: checking for suffix of executables" >&5 ++echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; } ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ # If both `conftest.exe' and `conftest' are `present' (well, observable) ++# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will ++# work properly (i.e., refer to `conftest.exe'), while it won't with ++# `rm'. ++for ac_file in conftest.exe conftest conftest.*; do ++ test -f "$ac_file" || continue ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; ++ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` ++ break;; ++ * ) break;; ++ esac ++done ++else ++ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link ++See \`config.log' for more details." >&5 ++echo "$as_me: error: cannot compute suffix of executables: cannot compile and link ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++rm -f conftest$ac_cv_exeext ++{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 ++echo "${ECHO_T}$ac_cv_exeext" >&6; } ++ ++rm -f conftest.$ac_ext ++EXEEXT=$ac_cv_exeext ++ac_exeext=$EXEEXT ++{ echo "$as_me:$LINENO: checking for suffix of object files" >&5 ++echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; } ++if test "${ac_cv_objext+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.o conftest.obj ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ for ac_file in conftest.o conftest.obj conftest.*; do ++ test -f "$ac_file" || continue; ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;; ++ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` ++ break;; ++ esac ++done ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile ++See \`config.log' for more details." >&5 ++echo "$as_me: error: cannot compute suffix of object files: cannot compile ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++rm -f conftest.$ac_cv_objext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 ++echo "${ECHO_T}$ac_cv_objext" >&6; } ++OBJEXT=$ac_cv_objext ++ac_objext=$OBJEXT ++{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 ++echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } ++if test "${ac_cv_c_compiler_gnu+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++#ifndef __GNUC__ ++ choke me ++#endif ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_compiler_gnu=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_compiler_gnu=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ac_cv_c_compiler_gnu=$ac_compiler_gnu ++ ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 ++echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } ++GCC=`test $ac_compiler_gnu = yes && echo yes` ++ac_test_CFLAGS=${CFLAGS+set} ++ac_save_CFLAGS=$CFLAGS ++{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 ++echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } ++if test "${ac_cv_prog_cc_g+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_save_c_werror_flag=$ac_c_werror_flag ++ ac_c_werror_flag=yes ++ ac_cv_prog_cc_g=no ++ CFLAGS="-g" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_prog_cc_g=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ CFLAGS="" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ : ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_c_werror_flag=$ac_save_c_werror_flag ++ CFLAGS="-g" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_prog_cc_g=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ac_c_werror_flag=$ac_save_c_werror_flag ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 ++echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } ++if test "$ac_test_CFLAGS" = set; then ++ CFLAGS=$ac_save_CFLAGS ++elif test $ac_cv_prog_cc_g = yes; then ++ if test "$GCC" = yes; then ++ CFLAGS="-g -O2" ++ else ++ CFLAGS="-g" ++ fi ++else ++ if test "$GCC" = yes; then ++ CFLAGS="-O2" ++ else ++ CFLAGS= ++ fi ++fi ++{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 ++echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } ++if test "${ac_cv_prog_cc_c89+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_cv_prog_cc_c89=no ++ac_save_CC=$CC ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++#include ++#include ++#include ++/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ ++struct buf { int x; }; ++FILE * (*rcsopen) (struct buf *, struct stat *, int); ++static char *e (p, i) ++ char **p; ++ int i; ++{ ++ return p[i]; ++} ++static char *f (char * (*g) (char **, int), char **p, ...) ++{ ++ char *s; ++ va_list v; ++ va_start (v,p); ++ s = g (p, va_arg (v,int)); ++ va_end (v); ++ return s; ++} ++ ++/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has ++ function prototypes and stuff, but not '\xHH' hex character constants. ++ These don't provoke an error unfortunately, instead are silently treated ++ as 'x'. The following induces an error, until -std is added to get ++ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an ++ array size at least. It's necessary to write '\x00'==0 to get something ++ that's true only with -std. */ ++int osf4_cc_array ['\x00' == 0 ? 1 : -1]; ++ ++/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters ++ inside strings and character constants. */ ++#define FOO(x) 'x' ++int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; ++ ++int test (int i, double x); ++struct s1 {int (*f) (int a);}; ++struct s2 {int (*f) (double a);}; ++int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); ++int argc; ++char **argv; ++int ++main () ++{ ++return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ++ ; ++ return 0; ++} ++_ACEOF ++for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ ++ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" ++do ++ CC="$ac_save_CC $ac_arg" ++ rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_prog_cc_c89=$ac_arg ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext ++ test "x$ac_cv_prog_cc_c89" != "xno" && break ++done ++rm -f conftest.$ac_ext ++CC=$ac_save_CC ++ ++fi ++# AC_CACHE_VAL ++case "x$ac_cv_prog_cc_c89" in ++ x) ++ { echo "$as_me:$LINENO: result: none needed" >&5 ++echo "${ECHO_T}none needed" >&6; } ;; ++ xno) ++ { echo "$as_me:$LINENO: result: unsupported" >&5 ++echo "${ECHO_T}unsupported" >&6; } ;; ++ *) ++ CC="$CC $ac_cv_prog_cc_c89" ++ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 ++echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; ++esac ++ ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++DEPDIR="${am__leading_dot}deps" ++ ++ac_config_commands="$ac_config_commands depfiles" ++ ++ ++am_make=${MAKE-make} ++cat > confinc << 'END' ++am__doit: ++ @echo done ++.PHONY: am__doit ++END ++# If we don't find an include directive, just comment out the code. ++{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 ++echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; } ++am__include="#" ++am__quote= ++_am_result=none ++# First try GNU make style include. ++echo "include confinc" > confmf ++# We grep out `Entering directory' and `Leaving directory' ++# messages which can occur if `w' ends up in MAKEFLAGS. ++# In particular we don't look at `^make:' because GNU make might ++# be invoked under some other name (usually "gmake"), in which ++# case it prints its new name instead of `make'. ++if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then ++ am__include=include ++ am__quote= ++ _am_result=GNU ++fi ++# Now try BSD make style include. ++if test "$am__include" = "#"; then ++ echo '.include "confinc"' > confmf ++ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then ++ am__include=.include ++ am__quote="\"" ++ _am_result=BSD ++ fi ++fi ++ ++ ++{ echo "$as_me:$LINENO: result: $_am_result" >&5 ++echo "${ECHO_T}$_am_result" >&6; } ++rm -f confinc confmf ++ ++# Check whether --enable-dependency-tracking was given. ++if test "${enable_dependency_tracking+set}" = set; then ++ enableval=$enable_dependency_tracking; ++fi ++ ++if test "x$enable_dependency_tracking" != xno; then ++ am_depcomp="$ac_aux_dir/depcomp" ++ AMDEPBACKSLASH='\' ++fi ++ ++ ++if test "x$enable_dependency_tracking" != xno; then ++ AMDEP_TRUE= ++ AMDEP_FALSE='#' ++else ++ AMDEP_TRUE='#' ++ AMDEP_FALSE= ++fi ++ ++ ++ ++ ++depcc="$CC" am_compiler_list= ++ ++{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 ++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } ++if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then ++ # We make a subdir and do the tests there. Otherwise we can end up ++ # making bogus files that we don't know about and never remove. For ++ # instance it was reported that on HP-UX the gcc test will end up ++ # making a dummy file named `D' -- because `-MD' means `put the output ++ # in D'. ++ mkdir conftest.dir ++ # Copy depcomp to subdir because otherwise we won't find it if we're ++ # using a relative directory. ++ cp "$am_depcomp" conftest.dir ++ cd conftest.dir ++ # We will build objects and dependencies in a subdirectory because ++ # it helps to detect inapplicable dependency modes. For instance ++ # both Tru64's cc and ICC support -MD to output dependencies as a ++ # side effect of compilation, but ICC will put the dependencies in ++ # the current directory while Tru64 will put them in the object ++ # directory. ++ mkdir sub ++ ++ am_cv_CC_dependencies_compiler_type=none ++ if test "$am_compiler_list" = ""; then ++ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` ++ fi ++ for depmode in $am_compiler_list; do ++ # Setup a source with many dependencies, because some compilers ++ # like to wrap large dependency lists on column 80 (with \), and ++ # we should not choose a depcomp mode which is confused by this. ++ # ++ # We need to recreate these files for each test, as the compiler may ++ # overwrite some of them when testing with obscure command lines. ++ # This happens at least with the AIX C compiler. ++ : > sub/conftest.c ++ for i in 1 2 3 4 5 6; do ++ echo '#include "conftst'$i'.h"' >> sub/conftest.c ++ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with ++ # Solaris 8's {/usr,}/bin/sh. ++ touch sub/conftst$i.h ++ done ++ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf ++ ++ case $depmode in ++ nosideeffect) ++ # after this tag, mechanisms are not by side-effect, so they'll ++ # only be used when explicitly requested ++ if test "x$enable_dependency_tracking" = xyes; then ++ continue ++ else ++ break ++ fi ++ ;; ++ none) break ;; ++ esac ++ # We check with `-c' and `-o' for the sake of the "dashmstdout" ++ # mode. It turns out that the SunPro C++ compiler does not properly ++ # handle `-M -o', and we need to detect this. ++ if depmode=$depmode \ ++ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ ++ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ ++ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ ++ >/dev/null 2>conftest.err && ++ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && ++ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then ++ # icc doesn't choke on unknown options, it will just issue warnings ++ # or remarks (even with -Werror). So we grep stderr for any message ++ # that says an option was ignored or not supported. ++ # When given -MP, icc 7.0 and 7.1 complain thusly: ++ # icc: Command line warning: ignoring option '-M'; no argument required ++ # The diagnosis changed in icc 8.0: ++ # icc: Command line remark: option '-MP' not supported ++ if (grep 'ignoring option' conftest.err || ++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else ++ am_cv_CC_dependencies_compiler_type=$depmode ++ break ++ fi ++ fi ++ done ++ ++ cd .. ++ rm -rf conftest.dir ++else ++ am_cv_CC_dependencies_compiler_type=none ++fi ++ ++fi ++{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 ++echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } ++CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type ++ ++ ++ ++if ++ test "x$enable_dependency_tracking" != xno \ ++ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then ++ am__fastdepCC_TRUE= ++ am__fastdepCC_FALSE='#' ++else ++ am__fastdepCC_TRUE='#' ++ am__fastdepCC_FALSE= ++fi ++ ++ ++if test "x$CC" != xcc; then ++ { echo "$as_me:$LINENO: checking whether $CC and cc understand -c and -o together" >&5 ++echo $ECHO_N "checking whether $CC and cc understand -c and -o together... $ECHO_C" >&6; } ++else ++ { echo "$as_me:$LINENO: checking whether cc understands -c and -o together" >&5 ++echo $ECHO_N "checking whether cc understands -c and -o together... $ECHO_C" >&6; } ++fi ++set dummy $CC; ac_cc=`echo $2 | ++ sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` ++if { as_var=ac_cv_prog_cc_${ac_cc}_c_o; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++# Make sure it works both with $CC and with simple cc. ++# We do the test twice because some compilers refuse to overwrite an ++# existing .o file with -o, though they will create one. ++ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5' ++rm -f conftest2.* ++if { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ test -f conftest2.$ac_objext && { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; ++then ++ eval ac_cv_prog_cc_${ac_cc}_c_o=yes ++ if test "x$CC" != xcc; then ++ # Test first that cc exists at all. ++ if { ac_try='cc -c conftest.$ac_ext >&5' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5' ++ rm -f conftest2.* ++ if { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ test -f conftest2.$ac_objext && { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; ++ then ++ # cc works too. ++ : ++ else ++ # cc exists but doesn't like -o. ++ eval ac_cv_prog_cc_${ac_cc}_c_o=no ++ fi ++ fi ++ fi ++else ++ eval ac_cv_prog_cc_${ac_cc}_c_o=no ++fi ++rm -f core conftest* ++ ++fi ++if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define NO_MINUS_C_MINUS_O 1 ++_ACEOF ++ ++fi ++ ++# FIXME: we rely on the cache variable name because ++# there is no other way. ++set dummy $CC ++ac_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` ++if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" != yes"; then ++ # Losing compiler, so override with the script. ++ # FIXME: It is wrong to rewrite CC. ++ # But if we don't then we get into trouble of one sort or another. ++ # A longer-term fix would be to have automake use am__CC in this case, ++ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" ++ CC="$am_aux_dir/compile $CC" ++fi ++ ++ ++# Find a good install program. We prefer a C program (faster), ++# so one script is as good as another. But avoid the broken or ++# incompatible versions: ++# SysV /etc/install, /usr/sbin/install ++# SunOS /usr/etc/install ++# IRIX /sbin/install ++# AIX /bin/install ++# AmigaOS /C/install, which installs bootblocks on floppy discs ++# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag ++# AFS /usr/afsws/bin/install, which mishandles nonexistent args ++# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" ++# OS/2's system install, which has a completely different semantic ++# ./install, which can be erroneously created by make from ./install.sh. ++{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 ++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } ++if test -z "$INSTALL"; then ++if test "${ac_cv_path_install+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ # Account for people who put trailing slashes in PATH elements. ++case $as_dir/ in ++ ./ | .// | /cC/* | \ ++ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ++ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ ++ /usr/ucb/* ) ;; ++ *) ++ # OSF1 and SCO ODT 3.0 have their own names for install. ++ # Don't use installbsd from OSF since it installs stuff as root ++ # by default. ++ for ac_prog in ginstall scoinst install; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then ++ if test $ac_prog = install && ++ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then ++ # AIX install. It has an incompatible calling convention. ++ : ++ elif test $ac_prog = install && ++ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then ++ # program-specific install script used by HP pwplus--don't use. ++ : ++ else ++ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" ++ break 3 ++ fi ++ fi ++ done ++ done ++ ;; ++esac ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ if test "${ac_cv_path_install+set}" = set; then ++ INSTALL=$ac_cv_path_install ++ else ++ # As a last resort, use the slow shell script. Don't cache a ++ # value for INSTALL within a source directory, because that will ++ # break other packages using the cache if that directory is ++ # removed, or if the value is a relative name. ++ INSTALL=$ac_install_sh ++ fi ++fi ++{ echo "$as_me:$LINENO: result: $INSTALL" >&5 ++echo "${ECHO_T}$INSTALL" >&6; } ++ ++# Use test -z because SunOS4 sh mishandles braces in ${var-val}. ++# It thinks the first close brace ends the variable substitution. ++test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' ++ ++test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' ++ ++test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' ++ ++case `pwd` in ++ *\ * | *\ *) ++ { echo "$as_me:$LINENO: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 ++echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; ++esac ++ ++ ++ ++macro_version='2.2.4' ++macro_revision='1.2976' ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ltmain="$ac_aux_dir/ltmain.sh" ++ ++# Make sure we can run config.sub. ++$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || ++ { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 ++echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} ++ { (exit 1); exit 1; }; } ++ ++{ echo "$as_me:$LINENO: checking build system type" >&5 ++echo $ECHO_N "checking build system type... $ECHO_C" >&6; } ++if test "${ac_cv_build+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_build_alias=$build_alias ++test "x$ac_build_alias" = x && ++ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` ++test "x$ac_build_alias" = x && ++ { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 ++echo "$as_me: error: cannot guess build type; you must specify one" >&2;} ++ { (exit 1); exit 1; }; } ++ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} ++ { (exit 1); exit 1; }; } ++ ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5 ++echo "${ECHO_T}$ac_cv_build" >&6; } ++case $ac_cv_build in ++*-*-*) ;; ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 ++echo "$as_me: error: invalid value of canonical build" >&2;} ++ { (exit 1); exit 1; }; };; ++esac ++build=$ac_cv_build ++ac_save_IFS=$IFS; IFS='-' ++set x $ac_cv_build ++shift ++build_cpu=$1 ++build_vendor=$2 ++shift; shift ++# Remember, the first character of IFS is used to create $*, ++# except with old shells: ++build_os=$* ++IFS=$ac_save_IFS ++case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac ++ ++ ++{ echo "$as_me:$LINENO: checking host system type" >&5 ++echo $ECHO_N "checking host system type... $ECHO_C" >&6; } ++if test "${ac_cv_host+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test "x$host_alias" = x; then ++ ac_cv_host=$ac_cv_build ++else ++ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5 ++echo "${ECHO_T}$ac_cv_host" >&6; } ++case $ac_cv_host in ++*-*-*) ;; ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 ++echo "$as_me: error: invalid value of canonical host" >&2;} ++ { (exit 1); exit 1; }; };; ++esac ++host=$ac_cv_host ++ac_save_IFS=$IFS; IFS='-' ++set x $ac_cv_host ++shift ++host_cpu=$1 ++host_vendor=$2 ++shift; shift ++# Remember, the first character of IFS is used to create $*, ++# except with old shells: ++host_os=$* ++IFS=$ac_save_IFS ++case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac ++ ++ ++{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 ++echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; } ++if test "${ac_cv_path_SED+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ ++ for ac_i in 1 2 3 4 5 6 7; do ++ ac_script="$ac_script$as_nl$ac_script" ++ done ++ echo "$ac_script" | sed 99q >conftest.sed ++ $as_unset ac_script || ac_script= ++ # Extract the first word of "sed gsed" to use in msg output ++if test -z "$SED"; then ++set dummy sed gsed; ac_prog_name=$2 ++if test "${ac_cv_path_SED+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_path_SED_found=false ++# Loop through the user's path and test for each of PROGNAME-LIST ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in sed gsed; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue ++ # Check for GNU ac_path_SED and select it if it is found. ++ # Check for GNU $ac_path_SED ++case `"$ac_path_SED" --version 2>&1` in ++*GNU*) ++ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; ++*) ++ ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ echo '' >> "conftest.nl" ++ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ ac_count=`expr $ac_count + 1` ++ if test $ac_count -gt ${ac_path_SED_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_SED="$ac_path_SED" ++ ac_path_SED_max=$ac_count ++ fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ ++ $ac_path_SED_found && break 3 ++ done ++done ++ ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ ++SED="$ac_cv_path_SED" ++if test -z "$SED"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in \$PATH" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in \$PATH" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++else ++ ac_cv_path_SED=$SED ++fi ++ ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5 ++echo "${ECHO_T}$ac_cv_path_SED" >&6; } ++ SED="$ac_cv_path_SED" ++ rm -f conftest.sed ++ ++test -z "$SED" && SED=sed ++Xsed="$SED -e 1s/^X//" ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 ++echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; } ++if test "${ac_cv_path_GREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ # Extract the first word of "grep ggrep" to use in msg output ++if test -z "$GREP"; then ++set dummy grep ggrep; ac_prog_name=$2 ++if test "${ac_cv_path_GREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_path_GREP_found=false ++# Loop through the user's path and test for each of PROGNAME-LIST ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in grep ggrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue ++ # Check for GNU ac_path_GREP and select it if it is found. ++ # Check for GNU $ac_path_GREP ++case `"$ac_path_GREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; ++*) ++ ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ echo 'GREP' >> "conftest.nl" ++ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ ac_count=`expr $ac_count + 1` ++ if test $ac_count -gt ${ac_path_GREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_GREP="$ac_path_GREP" ++ ac_path_GREP_max=$ac_count ++ fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ ++ $ac_path_GREP_found && break 3 ++ done ++done ++ ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ ++GREP="$ac_cv_path_GREP" ++if test -z "$GREP"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++else ++ ac_cv_path_GREP=$GREP ++fi ++ ++ ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 ++echo "${ECHO_T}$ac_cv_path_GREP" >&6; } ++ GREP="$ac_cv_path_GREP" ++ ++ ++{ echo "$as_me:$LINENO: checking for egrep" >&5 ++echo $ECHO_N "checking for egrep... $ECHO_C" >&6; } ++if test "${ac_cv_path_EGREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 ++ then ac_cv_path_EGREP="$GREP -E" ++ else ++ # Extract the first word of "egrep" to use in msg output ++if test -z "$EGREP"; then ++set dummy egrep; ac_prog_name=$2 ++if test "${ac_cv_path_EGREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_path_EGREP_found=false ++# Loop through the user's path and test for each of PROGNAME-LIST ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in egrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue ++ # Check for GNU ac_path_EGREP and select it if it is found. ++ # Check for GNU $ac_path_EGREP ++case `"$ac_path_EGREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; ++*) ++ ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ echo 'EGREP' >> "conftest.nl" ++ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ ac_count=`expr $ac_count + 1` ++ if test $ac_count -gt ${ac_path_EGREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_EGREP="$ac_path_EGREP" ++ ac_path_EGREP_max=$ac_count ++ fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ ++ $ac_path_EGREP_found && break 3 ++ done ++done ++ ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ ++EGREP="$ac_cv_path_EGREP" ++if test -z "$EGREP"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++else ++ ac_cv_path_EGREP=$EGREP ++fi ++ ++ ++ fi ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 ++echo "${ECHO_T}$ac_cv_path_EGREP" >&6; } ++ EGREP="$ac_cv_path_EGREP" ++ ++ ++{ echo "$as_me:$LINENO: checking for fgrep" >&5 ++echo $ECHO_N "checking for fgrep... $ECHO_C" >&6; } ++if test "${ac_cv_path_FGREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 ++ then ac_cv_path_FGREP="$GREP -F" ++ else ++ # Extract the first word of "fgrep" to use in msg output ++if test -z "$FGREP"; then ++set dummy fgrep; ac_prog_name=$2 ++if test "${ac_cv_path_FGREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_path_FGREP_found=false ++# Loop through the user's path and test for each of PROGNAME-LIST ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in fgrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue ++ # Check for GNU ac_path_FGREP and select it if it is found. ++ # Check for GNU $ac_path_FGREP ++case `"$ac_path_FGREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; ++*) ++ ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ echo 'FGREP' >> "conftest.nl" ++ "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ ac_count=`expr $ac_count + 1` ++ if test $ac_count -gt ${ac_path_FGREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_FGREP="$ac_path_FGREP" ++ ac_path_FGREP_max=$ac_count ++ fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ ++ $ac_path_FGREP_found && break 3 ++ done ++done ++ ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ ++FGREP="$ac_cv_path_FGREP" ++if test -z "$FGREP"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++else ++ ac_cv_path_FGREP=$FGREP ++fi ++ ++ ++ fi ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5 ++echo "${ECHO_T}$ac_cv_path_FGREP" >&6; } ++ FGREP="$ac_cv_path_FGREP" ++ ++ ++test -z "$GREP" && GREP=grep ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++# Check whether --with-gnu-ld was given. ++if test "${with_gnu_ld+set}" = set; then ++ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes ++else ++ with_gnu_ld=no ++fi ++ ++ac_prog=ld ++if test "$GCC" = yes; then ++ # Check if gcc -print-prog-name=ld gives a path. ++ { echo "$as_me:$LINENO: checking for ld used by $CC" >&5 ++echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; } ++ case $host in ++ *-*-mingw*) ++ # gcc leaves a trailing carriage return which upsets mingw ++ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; ++ *) ++ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; ++ esac ++ case $ac_prog in ++ # Accept absolute paths. ++ [\\/]* | ?:[\\/]*) ++ re_direlt='/[^/][^/]*/\.\./' ++ # Canonicalize the pathname of ld ++ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` ++ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ++ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` ++ done ++ test -z "$LD" && LD="$ac_prog" ++ ;; ++ "") ++ # If it fails, then pretend we aren't using GCC. ++ ac_prog=ld ++ ;; ++ *) ++ # If it is relative, then search for the first ld in PATH. ++ with_gnu_ld=unknown ++ ;; ++ esac ++elif test "$with_gnu_ld" = yes; then ++ { echo "$as_me:$LINENO: checking for GNU ld" >&5 ++echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; } ++else ++ { echo "$as_me:$LINENO: checking for non-GNU ld" >&5 ++echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; } ++fi ++if test "${lt_cv_path_LD+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -z "$LD"; then ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then ++ lt_cv_path_LD="$ac_dir/$ac_prog" ++ # Check to see if the program is GNU ld. I'd rather use --version, ++ # but apparently some variants of GNU ld only accept -v. ++ # Break only if it was the GNU/non-GNU ld that we prefer. ++ case `"$lt_cv_path_LD" -v 2>&1 &5 ++echo "${ECHO_T}$LD" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 ++echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} ++ { (exit 1); exit 1; }; } ++{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 ++echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; } ++if test "${lt_cv_prog_gnu_ld+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ # I'd rather use --version here, but apparently some GNU lds only accept -v. ++case `$LD -v 2>&1 &5 ++echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; } ++with_gnu_ld=$lt_cv_prog_gnu_ld ++ ++ ++ ++ ++ ++ ++ ++ ++ ++{ echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5 ++echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6; } ++if test "${lt_cv_path_NM+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$NM"; then ++ # Let the user override the test. ++ lt_cv_path_NM="$NM" ++else ++ lt_nm_to_check="${ac_tool_prefix}nm" ++ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then ++ lt_nm_to_check="$lt_nm_to_check nm" ++ fi ++ for lt_tmp_nm in $lt_nm_to_check; do ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ tmp_nm="$ac_dir/$lt_tmp_nm" ++ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then ++ # Check to see if the nm accepts a BSD-compat flag. ++ # Adding the `sed 1q' prevents false positives on HP-UX, which says: ++ # nm: unknown option "B" ignored ++ # Tru64's nm complains that /dev/null is an invalid object file ++ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in ++ */dev/null* | *'Invalid file or object type'*) ++ lt_cv_path_NM="$tmp_nm -B" ++ break ++ ;; ++ *) ++ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in ++ */dev/null*) ++ lt_cv_path_NM="$tmp_nm -p" ++ break ++ ;; ++ *) ++ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but ++ continue # so that we can try to find one that supports BSD flags ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ done ++ IFS="$lt_save_ifs" ++ done ++ : ${lt_cv_path_NM=no} ++fi ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 ++echo "${ECHO_T}$lt_cv_path_NM" >&6; } ++if test "$lt_cv_path_NM" != "no"; then ++ NM="$lt_cv_path_NM" ++else ++ # Didn't find any BSD compatible name lister, look for dumpbin. ++ if test -n "$ac_tool_prefix"; then ++ for ac_prog in "dumpbin -symbols" "link -dump -symbols" ++ do ++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. ++set dummy $ac_tool_prefix$ac_prog; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_DUMPBIN+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$DUMPBIN"; then ++ ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++DUMPBIN=$ac_cv_prog_DUMPBIN ++if test -n "$DUMPBIN"; then ++ { echo "$as_me:$LINENO: result: $DUMPBIN" >&5 ++echo "${ECHO_T}$DUMPBIN" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ test -n "$DUMPBIN" && break ++ done ++fi ++if test -z "$DUMPBIN"; then ++ ac_ct_DUMPBIN=$DUMPBIN ++ for ac_prog in "dumpbin -symbols" "link -dump -symbols" ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_DUMPBIN"; then ++ ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN ++if test -n "$ac_ct_DUMPBIN"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5 ++echo "${ECHO_T}$ac_ct_DUMPBIN" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ test -n "$ac_ct_DUMPBIN" && break ++done ++ ++ if test "x$ac_ct_DUMPBIN" = x; then ++ DUMPBIN=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ DUMPBIN=$ac_ct_DUMPBIN ++ fi ++fi ++ ++ ++ if test "$DUMPBIN" != ":"; then ++ NM="$DUMPBIN" ++ fi ++fi ++test -z "$NM" && NM=nm ++ ++ ++ ++ ++ ++ ++{ echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5 ++echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6; } ++if test "${lt_cv_nm_interface+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_nm_interface="BSD nm" ++ echo "int some_variable = 0;" > conftest.$ac_ext ++ (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&5) ++ (eval "$ac_compile" 2>conftest.err) ++ cat conftest.err >&5 ++ (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&5) ++ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) ++ cat conftest.err >&5 ++ (eval echo "\"\$as_me:__oline__: output\"" >&5) ++ cat conftest.out >&5 ++ if $GREP 'External.*some_variable' conftest.out > /dev/null; then ++ lt_cv_nm_interface="MS dumpbin" ++ fi ++ rm -f conftest* ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5 ++echo "${ECHO_T}$lt_cv_nm_interface" >&6; } ++ ++{ echo "$as_me:$LINENO: checking whether ln -s works" >&5 ++echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; } ++LN_S=$as_ln_s ++if test "$LN_S" = "ln -s"; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no, using $LN_S" >&5 ++echo "${ECHO_T}no, using $LN_S" >&6; } ++fi ++ ++# find the maximum length of command line arguments ++{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 ++echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; } ++if test "${lt_cv_sys_max_cmd_len+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ i=0 ++ teststring="ABCD" ++ ++ case $build_os in ++ msdosdjgpp*) ++ # On DJGPP, this test can blow up pretty badly due to problems in libc ++ # (any single argument exceeding 2000 bytes causes a buffer overrun ++ # during glob expansion). Even if it were fixed, the result of this ++ # check would be larger than it should be. ++ lt_cv_sys_max_cmd_len=12288; # 12K is about right ++ ;; ++ ++ gnu*) ++ # Under GNU Hurd, this test is not required because there is ++ # no limit to the length of command line arguments. ++ # Libtool will interpret -1 as no limit whatsoever ++ lt_cv_sys_max_cmd_len=-1; ++ ;; ++ ++ cygwin* | mingw*) ++ # On Win9x/ME, this test blows up -- it succeeds, but takes ++ # about 5 minutes as the teststring grows exponentially. ++ # Worse, since 9x/ME are not pre-emptively multitasking, ++ # you end up with a "frozen" computer, even though with patience ++ # the test eventually succeeds (with a max line length of 256k). ++ # Instead, let's just punt: use the minimum linelength reported by ++ # all of the supported platforms: 8192 (on NT/2K/XP). ++ lt_cv_sys_max_cmd_len=8192; ++ ;; ++ ++ amigaos*) ++ # On AmigaOS with pdksh, this test takes hours, literally. ++ # So we just punt and use a minimum line length of 8192. ++ lt_cv_sys_max_cmd_len=8192; ++ ;; ++ ++ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) ++ # This has been around since 386BSD, at least. Likely further. ++ if test -x /sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` ++ elif test -x /usr/sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` ++ else ++ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs ++ fi ++ # And add a safety zone ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ ;; ++ ++ interix*) ++ # We know the value 262144 and hardcode it with a safety zone (like BSD) ++ lt_cv_sys_max_cmd_len=196608 ++ ;; ++ ++ osf*) ++ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure ++ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not ++ # nice to cause kernel panics so lets avoid the loop below. ++ # First set a reasonable default. ++ lt_cv_sys_max_cmd_len=16384 ++ # ++ if test -x /sbin/sysconfig; then ++ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in ++ *1*) lt_cv_sys_max_cmd_len=-1 ;; ++ esac ++ fi ++ ;; ++ sco3.2v5*) ++ lt_cv_sys_max_cmd_len=102400 ++ ;; ++ sysv5* | sco5v6* | sysv4.2uw2*) ++ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` ++ if test -n "$kargmax"; then ++ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` ++ else ++ lt_cv_sys_max_cmd_len=32768 ++ fi ++ ;; ++ *) ++ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` ++ if test -n "$lt_cv_sys_max_cmd_len"; then ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ else ++ # Make teststring a little bigger before we do anything with it. ++ # a 1K string should be a reasonable start. ++ for i in 1 2 3 4 5 6 7 8 ; do ++ teststring=$teststring$teststring ++ done ++ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} ++ # If test is not a shell built-in, we'll probably end up computing a ++ # maximum length that is only half of the actual maximum length, but ++ # we can't tell. ++ while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ ++ = "XX$teststring$teststring"; } >/dev/null 2>&1 && ++ test $i != 17 # 1/2 MB should be enough ++ do ++ i=`expr $i + 1` ++ teststring=$teststring$teststring ++ done ++ # Only check the string length outside the loop. ++ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` ++ teststring= ++ # Add a significant safety factor because C++ compilers can tack on ++ # massive amounts of additional arguments before passing them to the ++ # linker. It appears as though 1/2 is a usable value. ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` ++ fi ++ ;; ++ esac ++ ++fi ++ ++if test -n $lt_cv_sys_max_cmd_len ; then ++ { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 ++echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; } ++else ++ { echo "$as_me:$LINENO: result: none" >&5 ++echo "${ECHO_T}none" >&6; } ++fi ++max_cmd_len=$lt_cv_sys_max_cmd_len ++ ++ ++ ++ ++ ++ ++: ${CP="cp -f"} ++: ${MV="mv -f"} ++: ${RM="rm -f"} ++ ++{ echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5 ++echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6; } ++# Try some XSI features ++xsi_shell=no ++( _lt_dummy="a/b/c" ++ test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ ++ = c,a/b,, \ ++ && eval 'test $(( 1 + 1 )) -eq 2 \ ++ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ ++ && xsi_shell=yes ++{ echo "$as_me:$LINENO: result: $xsi_shell" >&5 ++echo "${ECHO_T}$xsi_shell" >&6; } ++ ++ ++{ echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5 ++echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6; } ++lt_shell_append=no ++( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ ++ >/dev/null 2>&1 \ ++ && lt_shell_append=yes ++{ echo "$as_me:$LINENO: result: $lt_shell_append" >&5 ++echo "${ECHO_T}$lt_shell_append" >&6; } ++ ++ ++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then ++ lt_unset=unset ++else ++ lt_unset=false ++fi ++ ++ ++ ++ ++ ++# test EBCDIC or ASCII ++case `echo X|tr X '\101'` in ++ A) # ASCII based system ++ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr ++ lt_SP2NL='tr \040 \012' ++ lt_NL2SP='tr \015\012 \040\040' ++ ;; ++ *) # EBCDIC based system ++ lt_SP2NL='tr \100 \n' ++ lt_NL2SP='tr \r\n \100\100' ++ ;; ++esac ++ ++ ++ ++ ++ ++ ++ ++ ++ ++{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 ++echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; } ++if test "${lt_cv_ld_reload_flag+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_ld_reload_flag='-r' ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 ++echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; } ++reload_flag=$lt_cv_ld_reload_flag ++case $reload_flag in ++"" | " "*) ;; ++*) reload_flag=" $reload_flag" ;; ++esac ++reload_cmds='$LD$reload_flag -o $output$reload_objs' ++case $host_os in ++ darwin*) ++ if test "$GCC" = yes; then ++ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' ++ else ++ reload_cmds='$LD$reload_flag -o $output$reload_objs' ++ fi ++ ;; ++esac ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 ++echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; } ++if test "${lt_cv_deplibs_check_method+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_file_magic_cmd='$MAGIC_CMD' ++lt_cv_file_magic_test_file= ++lt_cv_deplibs_check_method='unknown' ++# Need to set the preceding variable on all platforms that support ++# interlibrary dependencies. ++# 'none' -- dependencies not supported. ++# `unknown' -- same as none, but documents that we really don't know. ++# 'pass_all' -- all dependencies passed with no checks. ++# 'test_compile' -- check by making test program. ++# 'file_magic [[regex]]' -- check by looking for files in library path ++# which responds to the $file_magic_cmd with a given extended regex. ++# If you have `file' or equivalent on your system and you're not sure ++# whether `pass_all' will *always* work, you probably want this one. ++ ++case $host_os in ++aix[4-9]*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++beos*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++bsdi[45]*) ++ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' ++ lt_cv_file_magic_cmd='/usr/bin/file -L' ++ lt_cv_file_magic_test_file=/shlib/libc.so ++ ;; ++ ++cygwin*) ++ # func_win32_libid is a shell function defined in ltmain.sh ++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' ++ lt_cv_file_magic_cmd='func_win32_libid' ++ ;; ++ ++mingw* | pw32*) ++ # Base MSYS/MinGW do not provide the 'file' command needed by ++ # func_win32_libid shell function, so use a weaker test based on 'objdump', ++ # unless we find 'file', for example because we are cross-compiling. ++ if ( file / ) >/dev/null 2>&1; then ++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' ++ lt_cv_file_magic_cmd='func_win32_libid' ++ else ++ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' ++ lt_cv_file_magic_cmd='$OBJDUMP -f' ++ fi ++ ;; ++ ++darwin* | rhapsody*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++freebsd* | dragonfly*) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then ++ case $host_cpu in ++ i*86 ) ++ # Not sure whether the presence of OpenBSD here was a mistake. ++ # Let's accept both of them until this is cleared up. ++ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' ++ lt_cv_file_magic_cmd=/usr/bin/file ++ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ++ ;; ++ esac ++ else ++ lt_cv_deplibs_check_method=pass_all ++ fi ++ ;; ++ ++gnu*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++hpux10.20* | hpux11*) ++ lt_cv_file_magic_cmd=/usr/bin/file ++ case $host_cpu in ++ ia64*) ++ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' ++ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ++ ;; ++ hppa*64*) ++ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' ++ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ++ ;; ++ *) ++ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' ++ lt_cv_file_magic_test_file=/usr/lib/libc.sl ++ ;; ++ esac ++ ;; ++ ++interix[3-9]*) ++ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' ++ ;; ++ ++irix5* | irix6* | nonstopux*) ++ case $LD in ++ *-32|*"-32 ") libmagic=32-bit;; ++ *-n32|*"-n32 ") libmagic=N32;; ++ *-64|*"-64 ") libmagic=64-bit;; ++ *) libmagic=never-match;; ++ esac ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++# This must be Linux ELF. ++linux* | k*bsd*-gnu) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' ++ else ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' ++ fi ++ ;; ++ ++newos6*) ++ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' ++ lt_cv_file_magic_cmd=/usr/bin/file ++ lt_cv_file_magic_test_file=/usr/lib/libnls.so ++ ;; ++ ++*nto* | *qnx*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++openbsd*) ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' ++ else ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' ++ fi ++ ;; ++ ++osf3* | osf4* | osf5*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++rdos*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++solaris*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++sysv4 | sysv4.3*) ++ case $host_vendor in ++ motorola) ++ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' ++ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ++ ;; ++ ncr) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ sequent) ++ lt_cv_file_magic_cmd='/bin/file' ++ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ++ ;; ++ sni) ++ lt_cv_file_magic_cmd='/bin/file' ++ lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" ++ lt_cv_file_magic_test_file=/lib/libc.so ++ ;; ++ siemens) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ pc) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ esac ++ ;; ++ ++tpf*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++esac ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 ++echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; } ++file_magic_cmd=$lt_cv_file_magic_cmd ++deplibs_check_method=$lt_cv_deplibs_check_method ++test -z "$deplibs_check_method" && deplibs_check_method=unknown ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. ++set dummy ${ac_tool_prefix}ar; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_AR+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$AR"; then ++ ac_cv_prog_AR="$AR" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_AR="${ac_tool_prefix}ar" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++AR=$ac_cv_prog_AR ++if test -n "$AR"; then ++ { echo "$as_me:$LINENO: result: $AR" >&5 ++echo "${ECHO_T}$AR" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_AR"; then ++ ac_ct_AR=$AR ++ # Extract the first word of "ar", so it can be a program name with args. ++set dummy ar; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_AR+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_AR"; then ++ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_AR="ar" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_AR=$ac_cv_prog_ac_ct_AR ++if test -n "$ac_ct_AR"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 ++echo "${ECHO_T}$ac_ct_AR" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_AR" = x; then ++ AR="false" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ AR=$ac_ct_AR ++ fi ++else ++ AR="$ac_cv_prog_AR" ++fi ++ ++test -z "$AR" && AR=ar ++test -z "$AR_FLAGS" && AR_FLAGS=cru ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. ++set dummy ${ac_tool_prefix}strip; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_STRIP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$STRIP"; then ++ ac_cv_prog_STRIP="$STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_STRIP="${ac_tool_prefix}strip" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++STRIP=$ac_cv_prog_STRIP ++if test -n "$STRIP"; then ++ { echo "$as_me:$LINENO: result: $STRIP" >&5 ++echo "${ECHO_T}$STRIP" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_STRIP"; then ++ ac_ct_STRIP=$STRIP ++ # Extract the first word of "strip", so it can be a program name with args. ++set dummy strip; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_STRIP"; then ++ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_STRIP="strip" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP ++if test -n "$ac_ct_STRIP"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 ++echo "${ECHO_T}$ac_ct_STRIP" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_STRIP" = x; then ++ STRIP=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ STRIP=$ac_ct_STRIP ++ fi ++else ++ STRIP="$ac_cv_prog_STRIP" ++fi ++ ++test -z "$STRIP" && STRIP=: ++ ++ ++ ++ ++ ++ ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. ++set dummy ${ac_tool_prefix}ranlib; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_RANLIB+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$RANLIB"; then ++ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++RANLIB=$ac_cv_prog_RANLIB ++if test -n "$RANLIB"; then ++ { echo "$as_me:$LINENO: result: $RANLIB" >&5 ++echo "${ECHO_T}$RANLIB" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_RANLIB"; then ++ ac_ct_RANLIB=$RANLIB ++ # Extract the first word of "ranlib", so it can be a program name with args. ++set dummy ranlib; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_RANLIB"; then ++ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_RANLIB="ranlib" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB ++if test -n "$ac_ct_RANLIB"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 ++echo "${ECHO_T}$ac_ct_RANLIB" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_RANLIB" = x; then ++ RANLIB=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ RANLIB=$ac_ct_RANLIB ++ fi ++else ++ RANLIB="$ac_cv_prog_RANLIB" ++fi ++ ++test -z "$RANLIB" && RANLIB=: ++ ++ ++ ++ ++ ++ ++# Determine commands to create old-style static archives. ++old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' ++old_postinstall_cmds='chmod 644 $oldlib' ++old_postuninstall_cmds= ++ ++if test -n "$RANLIB"; then ++ case $host_os in ++ openbsd*) ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" ++ ;; ++ *) ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" ++ ;; ++ esac ++ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} ++ ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++ ++# Allow CC to be a program name with arguments. ++compiler=$CC ++ ++ ++# Check for command to grab the raw symbol name followed by C symbol from nm. ++{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 ++echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; } ++if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ++# These are sane defaults that work on at least a few old systems. ++# [They come from Ultrix. What could be older than Ultrix?!! ;)] ++ ++# Character class describing NM global symbol codes. ++symcode='[BCDEGRST]' ++ ++# Regexp to match symbols that can be accessed directly from C. ++sympat='\([_A-Za-z][_A-Za-z0-9]*\)' ++ ++# Define system-specific variables. ++case $host_os in ++aix*) ++ symcode='[BCDT]' ++ ;; ++cygwin* | mingw* | pw32*) ++ symcode='[ABCDGISTW]' ++ ;; ++hpux*) ++ if test "$host_cpu" = ia64; then ++ symcode='[ABCDEGRST]' ++ fi ++ ;; ++irix* | nonstopux*) ++ symcode='[BCDEGRST]' ++ ;; ++osf*) ++ symcode='[BCDEGQRST]' ++ ;; ++solaris*) ++ symcode='[BDRT]' ++ ;; ++sco3.2v5*) ++ symcode='[DT]' ++ ;; ++sysv4.2uw2*) ++ symcode='[DT]' ++ ;; ++sysv5* | sco5v6* | unixware* | OpenUNIX*) ++ symcode='[ABDT]' ++ ;; ++sysv4) ++ symcode='[DFNSTU]' ++ ;; ++esac ++ ++# If we're using GNU nm, then use its standard symbol codes. ++case `$NM -V 2>&1` in ++*GNU* | *'with BFD'*) ++ symcode='[ABCDGIRSTW]' ;; ++esac ++ ++# Transform an extracted symbol line into a proper C declaration. ++# Some systems (esp. on ia64) link data and code symbols differently, ++# so use this general approach. ++lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" ++ ++# Transform an extracted symbol line into symbol name and symbol address ++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" ++ ++# Handle CRLF in mingw tool chain ++opt_cr= ++case $build_os in ++mingw*) ++ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ++ ;; ++esac ++ ++# Try without a prefix underscore, then with it. ++for ac_symprfx in "" "_"; do ++ ++ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. ++ symxfrm="\\1 $ac_symprfx\\2 \\2" ++ ++ # Write the raw and C identifiers. ++ if test "$lt_cv_nm_interface" = "MS dumpbin"; then ++ # Fake it for dumpbin and say T for any non-static function ++ # and D for any global variable. ++ # Also find C++ and __fastcall symbols from MSVC++, ++ # which start with @ or ?. ++ lt_cv_sys_global_symbol_pipe="$AWK '"\ ++" {last_section=section; section=\$ 3};"\ ++" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ ++" \$ 0!~/External *\|/{next};"\ ++" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ ++" {if(hide[section]) next};"\ ++" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ ++" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ ++" s[1]~/^[@?]/{print s[1], s[1]; next};"\ ++" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ ++" ' prfx=^$ac_symprfx" ++ else ++ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" ++ fi ++ ++ # Check to see that the pipe works correctly. ++ pipe_works=no ++ ++ rm -f conftest* ++ cat > conftest.$ac_ext <<_LT_EOF ++#ifdef __cplusplus ++extern "C" { ++#endif ++char nm_test_var; ++void nm_test_func(void); ++void nm_test_func(void){} ++#ifdef __cplusplus ++} ++#endif ++int main(){nm_test_var='a';nm_test_func();return(0);} ++_LT_EOF ++ ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ # Now try to grab the symbols. ++ nlist=conftest.nm ++ if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 ++ (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && test -s "$nlist"; then ++ # Try sorting and uniquifying the output. ++ if sort "$nlist" | uniq > "$nlist"T; then ++ mv -f "$nlist"T "$nlist" ++ else ++ rm -f "$nlist"T ++ fi ++ ++ # Make sure that we snagged all the symbols we need. ++ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then ++ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then ++ cat <<_LT_EOF > conftest.$ac_ext ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++_LT_EOF ++ # Now generate the symbol file. ++ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' ++ ++ cat <<_LT_EOF >> conftest.$ac_ext ++ ++/* The mapping between symbol names and symbols. */ ++const struct { ++ const char *name; ++ void *address; ++} ++lt__PROGRAM__LTX_preloaded_symbols[] = ++{ ++ { "@PROGRAM@", (void *) 0 }, ++_LT_EOF ++ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext ++ cat <<\_LT_EOF >> conftest.$ac_ext ++ {0, (void *) 0} ++}; ++ ++/* This works around a problem in FreeBSD linker */ ++#ifdef FREEBSD_WORKAROUND ++static const void *lt_preloaded_setup() { ++ return lt__PROGRAM__LTX_preloaded_symbols; ++} ++#endif ++ ++#ifdef __cplusplus ++} ++#endif ++_LT_EOF ++ # Now try linking the two files. ++ mv conftest.$ac_objext conftstm.$ac_objext ++ lt_save_LIBS="$LIBS" ++ lt_save_CFLAGS="$CFLAGS" ++ LIBS="conftstm.$ac_objext" ++ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" ++ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && test -s conftest${ac_exeext}; then ++ pipe_works=yes ++ fi ++ LIBS="$lt_save_LIBS" ++ CFLAGS="$lt_save_CFLAGS" ++ else ++ echo "cannot find nm_test_func in $nlist" >&5 ++ fi ++ else ++ echo "cannot find nm_test_var in $nlist" >&5 ++ fi ++ else ++ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 ++ fi ++ else ++ echo "$progname: failed program was:" >&5 ++ cat conftest.$ac_ext >&5 ++ fi ++ rm -rf conftest* conftst* ++ ++ # Do not use the global_symbol_pipe unless it works. ++ if test "$pipe_works" = yes; then ++ break ++ else ++ lt_cv_sys_global_symbol_pipe= ++ fi ++done ++ ++fi ++ ++if test -z "$lt_cv_sys_global_symbol_pipe"; then ++ lt_cv_sys_global_symbol_to_cdecl= ++fi ++if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then ++ { echo "$as_me:$LINENO: result: failed" >&5 ++echo "${ECHO_T}failed" >&6; } ++else ++ { echo "$as_me:$LINENO: result: ok" >&5 ++echo "${ECHO_T}ok" >&6; } ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++# Check whether --enable-libtool-lock was given. ++if test "${enable_libtool_lock+set}" = set; then ++ enableval=$enable_libtool_lock; ++fi ++ ++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes ++ ++# Some flags need to be propagated to the compiler or linker for good ++# libtool support. ++case $host in ++ia64-*-hpux*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ case `/usr/bin/file conftest.$ac_objext` in ++ *ELF-32*) ++ HPUX_IA64_MODE="32" ++ ;; ++ *ELF-64*) ++ HPUX_IA64_MODE="64" ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; ++*-*-irix6*) ++ # Find out which ABI we are using. ++ echo '#line __oline__ "configure"' > conftest.$ac_ext ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ case `/usr/bin/file conftest.$ac_objext` in ++ *32-bit*) ++ LD="${LD-ld} -melf32bsmip" ++ ;; ++ *N32*) ++ LD="${LD-ld} -melf32bmipn32" ++ ;; ++ *64-bit*) ++ LD="${LD-ld} -melf64bmip" ++ ;; ++ esac ++ else ++ case `/usr/bin/file conftest.$ac_objext` in ++ *32-bit*) ++ LD="${LD-ld} -32" ++ ;; ++ *N32*) ++ LD="${LD-ld} -n32" ++ ;; ++ *64-bit*) ++ LD="${LD-ld} -64" ++ ;; ++ esac ++ fi ++ fi ++ rm -rf conftest* ++ ;; ++ ++x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ ++s390*-*linux*|s390*-*tpf*|sparc*-*linux*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ case `/usr/bin/file conftest.o` in ++ *32-bit*) ++ case $host in ++ x86_64-*kfreebsd*-gnu) ++ LD="${LD-ld} -m elf_i386_fbsd" ++ ;; ++ x86_64-*linux*) ++ LD="${LD-ld} -m elf_i386" ++ ;; ++ ppc64-*linux*|powerpc64-*linux*) ++ LD="${LD-ld} -m elf32ppclinux" ++ ;; ++ s390x-*linux*) ++ LD="${LD-ld} -m elf_s390" ++ ;; ++ sparc64-*linux*) ++ LD="${LD-ld} -m elf32_sparc" ++ ;; ++ esac ++ ;; ++ *64-bit*) ++ case $host in ++ x86_64-*kfreebsd*-gnu) ++ LD="${LD-ld} -m elf_x86_64_fbsd" ++ ;; ++ x86_64-*linux*) ++ LD="${LD-ld} -m elf_x86_64" ++ ;; ++ ppc*-*linux*|powerpc*-*linux*) ++ LD="${LD-ld} -m elf64ppc" ++ ;; ++ s390*-*linux*|s390*-*tpf*) ++ LD="${LD-ld} -m elf64_s390" ++ ;; ++ sparc*-*linux*) ++ LD="${LD-ld} -m elf64_sparc" ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; ++ ++*-*-sco3.2v5*) ++ # On SCO OpenServer 5, we need -belf to get full-featured binaries. ++ SAVE_CFLAGS="$CFLAGS" ++ CFLAGS="$CFLAGS -belf" ++ { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 ++echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; } ++if test "${lt_cv_cc_needs_belf+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ lt_cv_cc_needs_belf=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ lt_cv_cc_needs_belf=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 ++echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; } ++ if test x"$lt_cv_cc_needs_belf" != x"yes"; then ++ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf ++ CFLAGS="$SAVE_CFLAGS" ++ fi ++ ;; ++sparc*-*solaris*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ case `/usr/bin/file conftest.o` in ++ *64-bit*) ++ case $lt_cv_prog_gnu_ld in ++ yes*) LD="${LD-ld} -m elf64_sparc" ;; ++ *) ++ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then ++ LD="${LD-ld} -64" ++ fi ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; ++esac ++ ++need_locks="$enable_libtool_lock" ++ ++ ++ case $host_os in ++ rhapsody* | darwin*) ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. ++set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_DSYMUTIL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$DSYMUTIL"; then ++ ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++DSYMUTIL=$ac_cv_prog_DSYMUTIL ++if test -n "$DSYMUTIL"; then ++ { echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 ++echo "${ECHO_T}$DSYMUTIL" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_DSYMUTIL"; then ++ ac_ct_DSYMUTIL=$DSYMUTIL ++ # Extract the first word of "dsymutil", so it can be a program name with args. ++set dummy dsymutil; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_DSYMUTIL"; then ++ ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL ++if test -n "$ac_ct_DSYMUTIL"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 ++echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_DSYMUTIL" = x; then ++ DSYMUTIL=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ DSYMUTIL=$ac_ct_DSYMUTIL ++ fi ++else ++ DSYMUTIL="$ac_cv_prog_DSYMUTIL" ++fi ++ ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. ++set dummy ${ac_tool_prefix}nmedit; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_NMEDIT+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$NMEDIT"; then ++ ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++NMEDIT=$ac_cv_prog_NMEDIT ++if test -n "$NMEDIT"; then ++ { echo "$as_me:$LINENO: result: $NMEDIT" >&5 ++echo "${ECHO_T}$NMEDIT" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_NMEDIT"; then ++ ac_ct_NMEDIT=$NMEDIT ++ # Extract the first word of "nmedit", so it can be a program name with args. ++set dummy nmedit; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_NMEDIT"; then ++ ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_NMEDIT="nmedit" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT ++if test -n "$ac_ct_NMEDIT"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 ++echo "${ECHO_T}$ac_ct_NMEDIT" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_NMEDIT" = x; then ++ NMEDIT=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ NMEDIT=$ac_ct_NMEDIT ++ fi ++else ++ NMEDIT="$ac_cv_prog_NMEDIT" ++fi ++ ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. ++set dummy ${ac_tool_prefix}lipo; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_LIPO+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$LIPO"; then ++ ac_cv_prog_LIPO="$LIPO" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_LIPO="${ac_tool_prefix}lipo" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++LIPO=$ac_cv_prog_LIPO ++if test -n "$LIPO"; then ++ { echo "$as_me:$LINENO: result: $LIPO" >&5 ++echo "${ECHO_T}$LIPO" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_LIPO"; then ++ ac_ct_LIPO=$LIPO ++ # Extract the first word of "lipo", so it can be a program name with args. ++set dummy lipo; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_LIPO"; then ++ ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_LIPO="lipo" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO ++if test -n "$ac_ct_LIPO"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5 ++echo "${ECHO_T}$ac_ct_LIPO" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_LIPO" = x; then ++ LIPO=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ LIPO=$ac_ct_LIPO ++ fi ++else ++ LIPO="$ac_cv_prog_LIPO" ++fi ++ ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. ++set dummy ${ac_tool_prefix}otool; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_OTOOL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$OTOOL"; then ++ ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_OTOOL="${ac_tool_prefix}otool" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++OTOOL=$ac_cv_prog_OTOOL ++if test -n "$OTOOL"; then ++ { echo "$as_me:$LINENO: result: $OTOOL" >&5 ++echo "${ECHO_T}$OTOOL" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_OTOOL"; then ++ ac_ct_OTOOL=$OTOOL ++ # Extract the first word of "otool", so it can be a program name with args. ++set dummy otool; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_OTOOL"; then ++ ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_OTOOL="otool" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL ++if test -n "$ac_ct_OTOOL"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5 ++echo "${ECHO_T}$ac_ct_OTOOL" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_OTOOL" = x; then ++ OTOOL=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ OTOOL=$ac_ct_OTOOL ++ fi ++else ++ OTOOL="$ac_cv_prog_OTOOL" ++fi ++ ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. ++set dummy ${ac_tool_prefix}otool64; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_OTOOL64+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$OTOOL64"; then ++ ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++OTOOL64=$ac_cv_prog_OTOOL64 ++if test -n "$OTOOL64"; then ++ { echo "$as_me:$LINENO: result: $OTOOL64" >&5 ++echo "${ECHO_T}$OTOOL64" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_OTOOL64"; then ++ ac_ct_OTOOL64=$OTOOL64 ++ # Extract the first word of "otool64", so it can be a program name with args. ++set dummy otool64; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_OTOOL64"; then ++ ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_OTOOL64="otool64" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 ++if test -n "$ac_ct_OTOOL64"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5 ++echo "${ECHO_T}$ac_ct_OTOOL64" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_OTOOL64" = x; then ++ OTOOL64=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ OTOOL64=$ac_ct_OTOOL64 ++ fi ++else ++ OTOOL64="$ac_cv_prog_OTOOL64" ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ { echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 ++echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6; } ++if test "${lt_cv_apple_cc_single_mod+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_apple_cc_single_mod=no ++ if test -z "${LT_MULTI_MODULE}"; then ++ # By default we will add the -single_module flag. You can override ++ # by either setting the environment variable LT_MULTI_MODULE ++ # non-empty at configure time, or by adding -multi_module to the ++ # link flags. ++ rm -rf libconftest.dylib* ++ echo "int foo(void){return 1;}" > conftest.c ++ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ ++-dynamiclib -Wl,-single_module conftest.c" >&5 ++ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ ++ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err ++ _lt_result=$? ++ if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then ++ lt_cv_apple_cc_single_mod=yes ++ else ++ cat conftest.err >&5 ++ fi ++ rm -rf libconftest.dylib* ++ rm -f conftest.* ++ fi ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 ++echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6; } ++ { echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 ++echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6; } ++if test "${lt_cv_ld_exported_symbols_list+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_ld_exported_symbols_list=no ++ save_LDFLAGS=$LDFLAGS ++ echo "_main" > conftest.sym ++ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ lt_cv_ld_exported_symbols_list=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ lt_cv_ld_exported_symbols_list=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ LDFLAGS="$save_LDFLAGS" ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 ++echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6; } ++ case $host_os in ++ rhapsody* | darwin1.[012]) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; ++ darwin1.*) ++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; ++ darwin*) # darwin 5.x on ++ # if running on 10.5 or later, the deployment target defaults ++ # to the OS version, if on x86, and 10.4, the deployment ++ # target defaults to 10.4. Don't you love it? ++ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in ++ 10.0,*86*-darwin8*|10.0,*-darwin[91]*) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; ++ 10.[012]*) ++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; ++ 10.*) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; ++ esac ++ ;; ++ esac ++ if test "$lt_cv_apple_cc_single_mod" = "yes"; then ++ _lt_dar_single_mod='$single_module' ++ fi ++ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then ++ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' ++ else ++ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ fi ++ if test "$DSYMUTIL" != ":"; then ++ _lt_dsymutil='~$DSYMUTIL $lib || :' ++ else ++ _lt_dsymutil= ++ fi ++ ;; ++ esac ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 ++echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; } ++# On Suns, sometimes $CPP names a directory. ++if test -n "$CPP" && test -d "$CPP"; then ++ CPP= ++fi ++if test -z "$CPP"; then ++ if test "${ac_cv_prog_CPP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ # Double quotes because CPP needs to be expanded ++ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" ++ do ++ ac_preproc_ok=false ++for ac_c_preproc_warn_flag in '' yes ++do ++ # Use a header file that comes with gcc, so configuring glibc ++ # with a fresh cross-compiler works. ++ # Prefer to if __STDC__ is defined, since ++ # exists even on freestanding compilers. ++ # On the NeXT, cc -E runs the code through the compiler's parser, ++ # not just through cpp. "Syntax error" is here to catch this case. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++@%:@ifdef __STDC__ ++@%:@ include ++@%:@else ++@%:@ include ++@%:@endif ++ Syntax error ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ : ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ # Broken: fails on valid input. ++continue ++fi ++ ++rm -f conftest.err conftest.$ac_ext ++ ++ # OK, works on sane cases. Now check whether nonexistent headers ++ # can be detected and how. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++@%:@include ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ # Broken: success on invalid input. ++continue ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ # Passes both tests. ++ac_preproc_ok=: ++break ++fi ++ ++rm -f conftest.err conftest.$ac_ext ++ ++done ++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. ++rm -f conftest.err conftest.$ac_ext ++if $ac_preproc_ok; then ++ break ++fi ++ ++ done ++ ac_cv_prog_CPP=$CPP ++ ++fi ++ CPP=$ac_cv_prog_CPP ++else ++ ac_cv_prog_CPP=$CPP ++fi ++{ echo "$as_me:$LINENO: result: $CPP" >&5 ++echo "${ECHO_T}$CPP" >&6; } ++ac_preproc_ok=false ++for ac_c_preproc_warn_flag in '' yes ++do ++ # Use a header file that comes with gcc, so configuring glibc ++ # with a fresh cross-compiler works. ++ # Prefer to if __STDC__ is defined, since ++ # exists even on freestanding compilers. ++ # On the NeXT, cc -E runs the code through the compiler's parser, ++ # not just through cpp. "Syntax error" is here to catch this case. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++@%:@ifdef __STDC__ ++@%:@ include ++@%:@else ++@%:@ include ++@%:@endif ++ Syntax error ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ : ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ # Broken: fails on valid input. ++continue ++fi ++ ++rm -f conftest.err conftest.$ac_ext ++ ++ # OK, works on sane cases. Now check whether nonexistent headers ++ # can be detected and how. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++@%:@include ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ # Broken: success on invalid input. ++continue ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ # Passes both tests. ++ac_preproc_ok=: ++break ++fi ++ ++rm -f conftest.err conftest.$ac_ext ++ ++done ++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. ++rm -f conftest.err conftest.$ac_ext ++if $ac_preproc_ok; then ++ : ++else ++ { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check ++See \`config.log' for more details." >&5 ++echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++ ++{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5 ++echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } ++if test "${ac_cv_header_stdc+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++#include ++#include ++#include ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_header_stdc=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_header_stdc=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++if test $ac_cv_header_stdc = yes; then ++ # SunOS 4.x string.h does not declare mem*, contrary to ANSI. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++ ++_ACEOF ++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | ++ $EGREP "memchr" >/dev/null 2>&1; then ++ : ++else ++ ac_cv_header_stdc=no ++fi ++rm -f conftest* ++ ++fi ++ ++if test $ac_cv_header_stdc = yes; then ++ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++ ++_ACEOF ++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | ++ $EGREP "free" >/dev/null 2>&1; then ++ : ++else ++ ac_cv_header_stdc=no ++fi ++rm -f conftest* ++ ++fi ++ ++if test $ac_cv_header_stdc = yes; then ++ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. ++ if test "$cross_compiling" = yes; then ++ : ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++#include ++#if ((' ' & 0x0FF) == 0x020) ++# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') ++# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) ++#else ++# define ISLOWER(c) \ ++ (('a' <= (c) && (c) <= 'i') \ ++ || ('j' <= (c) && (c) <= 'r') \ ++ || ('s' <= (c) && (c) <= 'z')) ++# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) ++#endif ++ ++#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) ++int ++main () ++{ ++ int i; ++ for (i = 0; i < 256; i++) ++ if (XOR (islower (i), ISLOWER (i)) ++ || toupper (i) != TOUPPER (i)) ++ return 2; ++ return 0; ++} ++_ACEOF ++rm -f conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ac_try='./conftest$ac_exeext' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ : ++else ++ echo "$as_me: program exited with status $ac_status" >&5 ++echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++( exit $ac_status ) ++ac_cv_header_stdc=no ++fi ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext ++fi ++ ++ ++fi ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 ++echo "${ECHO_T}$ac_cv_header_stdc" >&6; } ++if test $ac_cv_header_stdc = yes; then ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define STDC_HEADERS 1 ++_ACEOF ++ ++fi ++ ++# On IRIX 5.3, sys/types and inttypes.h are conflicting. ++ ++ ++ ++ ++ ++ ++ ++ ++ ++for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ ++ inttypes.h stdint.h unistd.h ++do ++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++$ac_includes_default ++ ++@%:@include <$ac_header> ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ eval "$as_ac_Header=yes" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ eval "$as_ac_Header=no" ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++if test `eval echo '${'$as_ac_Header'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++@%:@define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++_ACEOF ++ ++fi ++ ++done ++ ++ ++ ++for ac_header in dlfcn.h ++do ++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++$ac_includes_default ++ ++@%:@include <$ac_header> ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ eval "$as_ac_Header=yes" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ eval "$as_ac_Header=no" ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++if test `eval echo '${'$as_ac_Header'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++@%:@define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++_ACEOF ++ ++fi ++ ++done ++ ++ ++ ++# Set options ++ ++ ++ ++ enable_dlopen=no ++ ++ ++ enable_win32_dll=no ++ ++ ++ # Check whether --enable-shared was given. ++if test "${enable_shared+set}" = set; then ++ enableval=$enable_shared; p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_shared=yes ;; ++ no) enable_shared=no ;; ++ *) ++ enable_shared=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_shared=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac ++else ++ enable_shared=yes ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ # Check whether --enable-static was given. ++if test "${enable_static+set}" = set; then ++ enableval=$enable_static; p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_static=yes ;; ++ no) enable_static=no ;; ++ *) ++ enable_static=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_static=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac ++else ++ enable_static=yes ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++# Check whether --with-pic was given. ++if test "${with_pic+set}" = set; then ++ withval=$with_pic; pic_mode="$withval" ++else ++ pic_mode=default ++fi ++ ++ ++test -z "$pic_mode" && pic_mode=default ++ ++ ++ ++ ++ ++ ++ ++ # Check whether --enable-fast-install was given. ++if test "${enable_fast_install+set}" = set; then ++ enableval=$enable_fast_install; p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_fast_install=yes ;; ++ no) enable_fast_install=no ;; ++ *) ++ enable_fast_install=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_fast_install=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac ++else ++ enable_fast_install=yes ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++# This can be used to rebuild libtool when needed ++LIBTOOL_DEPS="$ltmain" ++ ++# Always use our own libtool. ++LIBTOOL='$(SHELL) $(top_builddir)/libtool' ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++test -z "$LN_S" && LN_S="ln -s" ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++fi ++ ++{ echo "$as_me:$LINENO: checking for objdir" >&5 ++echo $ECHO_N "checking for objdir... $ECHO_C" >&6; } ++if test "${lt_cv_objdir+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ rm -f .libs 2>/dev/null ++mkdir .libs 2>/dev/null ++if test -d .libs; then ++ lt_cv_objdir=.libs ++else ++ # MS-DOS does not allow filenames that begin with a dot. ++ lt_cv_objdir=_libs ++fi ++rmdir .libs 2>/dev/null ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 ++echo "${ECHO_T}$lt_cv_objdir" >&6; } ++objdir=$lt_cv_objdir ++ ++ ++ ++ ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define LT_OBJDIR "$lt_cv_objdir/" ++_ACEOF ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++case $host_os in ++aix3*) ++ # AIX sometimes has problems with the GCC collect2 program. For some ++ # reason, if we set the COLLECT_NAMES environment variable, the problems ++ # vanish in a puff of smoke. ++ if test "X${COLLECT_NAMES+set}" != Xset; then ++ COLLECT_NAMES= ++ export COLLECT_NAMES ++ fi ++ ;; ++esac ++ ++# Sed substitution that helps us do robust quoting. It backslashifies ++# metacharacters that are still active within double-quoted strings. ++sed_quote_subst='s/\(["`$\\]\)/\\\1/g' ++ ++# Same as above, but do not quote variable references. ++double_quote_subst='s/\(["`\\]\)/\\\1/g' ++ ++# Sed substitution to delay expansion of an escaped shell variable in a ++# double_quote_subst'ed string. ++delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' ++ ++# Sed substitution to delay expansion of an escaped single quote. ++delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' ++ ++# Sed substitution to avoid accidental globbing in evaled expressions ++no_glob_subst='s/\*/\\\*/g' ++ ++# Global variables: ++ofile=libtool ++can_build_shared=yes ++ ++# All known linkers require a `.a' archive for static linking (except MSVC, ++# which needs '.lib'). ++libext=a ++ ++with_gnu_ld="$lt_cv_prog_gnu_ld" ++ ++old_CC="$CC" ++old_CFLAGS="$CFLAGS" ++ ++# Set sane defaults for various variables ++test -z "$CC" && CC=cc ++test -z "$LTCC" && LTCC=$CC ++test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS ++test -z "$LD" && LD=ld ++test -z "$ac_objext" && ac_objext=o ++ ++for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++ ++ ++# Only perform the check for file, if the check method requires it ++test -z "$MAGIC_CMD" && MAGIC_CMD=file ++case $deplibs_check_method in ++file_magic*) ++ if test "$file_magic_cmd" = '$MAGIC_CMD'; then ++ { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 ++echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; } ++if test "${lt_cv_path_MAGIC_CMD+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $MAGIC_CMD in ++[\\/*] | ?:[\\/]*) ++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ++ ;; ++*) ++ lt_save_MAGIC_CMD="$MAGIC_CMD" ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" ++ for ac_dir in $ac_dummy; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/${ac_tool_prefix}file; then ++ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" ++ if test -n "$file_magic_test_file"; then ++ case $deplibs_check_method in ++ "file_magic "*) ++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` ++ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | ++ $EGREP "$file_magic_regex" > /dev/null; then ++ : ++ else ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: the command libtool uses to detect shared libraries, ++*** $file_magic_cmd, produces output that libtool cannot recognize. ++*** The result is that libtool may fail to recognize shared libraries ++*** as such. This will affect the creation of libtool libraries that ++*** depend on shared libraries, but programs linked with such libtool ++*** libraries will work regardless of this problem. Nevertheless, you ++*** may want to report the problem to your system manager and/or to ++*** bug-libtool@gnu.org ++ ++_LT_EOF ++ fi ;; ++ esac ++ fi ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" ++ MAGIC_CMD="$lt_save_MAGIC_CMD" ++ ;; ++esac ++fi ++ ++MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++if test -n "$MAGIC_CMD"; then ++ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 ++echo "${ECHO_T}$MAGIC_CMD" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ ++ ++ ++if test -z "$lt_cv_path_MAGIC_CMD"; then ++ if test -n "$ac_tool_prefix"; then ++ { echo "$as_me:$LINENO: checking for file" >&5 ++echo $ECHO_N "checking for file... $ECHO_C" >&6; } ++if test "${lt_cv_path_MAGIC_CMD+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $MAGIC_CMD in ++[\\/*] | ?:[\\/]*) ++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ++ ;; ++*) ++ lt_save_MAGIC_CMD="$MAGIC_CMD" ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" ++ for ac_dir in $ac_dummy; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/file; then ++ lt_cv_path_MAGIC_CMD="$ac_dir/file" ++ if test -n "$file_magic_test_file"; then ++ case $deplibs_check_method in ++ "file_magic "*) ++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` ++ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | ++ $EGREP "$file_magic_regex" > /dev/null; then ++ : ++ else ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: the command libtool uses to detect shared libraries, ++*** $file_magic_cmd, produces output that libtool cannot recognize. ++*** The result is that libtool may fail to recognize shared libraries ++*** as such. This will affect the creation of libtool libraries that ++*** depend on shared libraries, but programs linked with such libtool ++*** libraries will work regardless of this problem. Nevertheless, you ++*** may want to report the problem to your system manager and/or to ++*** bug-libtool@gnu.org ++ ++_LT_EOF ++ fi ;; ++ esac ++ fi ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" ++ MAGIC_CMD="$lt_save_MAGIC_CMD" ++ ;; ++esac ++fi ++ ++MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++if test -n "$MAGIC_CMD"; then ++ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 ++echo "${ECHO_T}$MAGIC_CMD" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ else ++ MAGIC_CMD=: ++ fi ++fi ++ ++ fi ++ ;; ++esac ++ ++# Use C for the default configuration in the libtool script ++ ++lt_save_CC="$CC" ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++ ++# Source file extension for C test sources. ++ac_ext=c ++ ++# Object file extension for compiled C test sources. ++objext=o ++objext=$objext ++ ++# Code to be used in simple compile tests ++lt_simple_compile_test_code="int some_variable = 0;" ++ ++# Code to be used in simple link tests ++lt_simple_link_test_code='int main(){return(0);}' ++ ++ ++ ++ ++ ++ ++ ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} ++ ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++ ++# Allow CC to be a program name with arguments. ++compiler=$CC ++ ++# Save the default compiler, since it gets overwritten when the other ++# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. ++compiler_DEFAULT=$CC ++ ++# save warnings/boilerplate of simple test code ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_compile_test_code" >conftest.$ac_ext ++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_compiler_boilerplate=`cat conftest.err` ++$RM conftest* ++ ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_link_test_code" >conftest.$ac_ext ++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_linker_boilerplate=`cat conftest.err` ++$RM -r conftest* ++ ++ ++## CAVEAT EMPTOR: ++## There is no encapsulation within the following macros, do not change ++## the running order or otherwise move them around unless you know exactly ++## what you are doing... ++if test -n "$compiler"; then ++ ++lt_prog_compiler_no_builtin_flag= ++ ++if test "$GCC" = yes; then ++ lt_prog_compiler_no_builtin_flag=' -fno-builtin' ++ ++ { echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 ++echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_rtti_exceptions=no ++ ac_outfile=conftest.$ac_objext ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="-fno-rtti -fno-exceptions" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&5 ++ echo "$as_me:__oline__: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_rtti_exceptions=yes ++ fi ++ fi ++ $RM conftest* ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; } ++ ++if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then ++ lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" ++else ++ : ++fi ++ ++fi ++ ++ ++ ++ ++ ++ ++ lt_prog_compiler_wl= ++lt_prog_compiler_pic= ++lt_prog_compiler_static= ++ ++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } ++ ++ if test "$GCC" = yes; then ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_static='-static' ++ ++ case $host_os in ++ aix*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ lt_prog_compiler_static='-Bstatic' ++ fi ++ ;; ++ ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ lt_prog_compiler_pic='-fPIC' ++ ;; ++ m68k) ++ # FIXME: we need at least 68020 code to build shared libraries, but ++ # adding the `-m68020' flag to GCC prevents building anything better, ++ # like `-m68040'. ++ lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' ++ ;; ++ esac ++ ;; ++ ++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ # PIC is the default for these OSes. ++ ;; ++ ++ mingw* | cygwin* | pw32* | os2*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ # Although the cygwin gcc ignores -fPIC, still need this for old-style ++ # (--disable-auto-import) libraries ++ lt_prog_compiler_pic='-DDLL_EXPORT' ++ ;; ++ ++ darwin* | rhapsody*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ lt_prog_compiler_pic='-fno-common' ++ ;; ++ ++ hpux*) ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ lt_prog_compiler_pic='-fPIC' ++ ;; ++ esac ++ ;; ++ ++ interix[3-9]*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; ++ ++ msdosdjgpp*) ++ # Just because we use GCC doesn't mean we suddenly get shared libraries ++ # on systems that don't support them. ++ lt_prog_compiler_can_build_shared=no ++ enable_shared=no ++ ;; ++ ++ *nto* | *qnx*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ lt_prog_compiler_pic='-fPIC -shared' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ lt_prog_compiler_pic=-Kconform_pic ++ fi ++ ;; ++ ++ *) ++ lt_prog_compiler_pic='-fPIC' ++ ;; ++ esac ++ else ++ # PORTME Check for flag to pass linker flags through the system compiler. ++ case $host_os in ++ aix*) ++ lt_prog_compiler_wl='-Wl,' ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ lt_prog_compiler_static='-Bstatic' ++ else ++ lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' ++ fi ++ ;; ++ ++ mingw* | cygwin* | pw32* | os2*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ lt_prog_compiler_pic='-DDLL_EXPORT' ++ ;; ++ ++ hpux9* | hpux10* | hpux11*) ++ lt_prog_compiler_wl='-Wl,' ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ lt_prog_compiler_pic='+Z' ++ ;; ++ esac ++ # Is there a better lt_prog_compiler_static that works with the bundled CC? ++ lt_prog_compiler_static='${wl}-a ${wl}archive' ++ ;; ++ ++ irix5* | irix6* | nonstopux*) ++ lt_prog_compiler_wl='-Wl,' ++ # PIC (with -KPIC) is the default. ++ lt_prog_compiler_static='-non_shared' ++ ;; ++ ++ linux* | k*bsd*-gnu) ++ case $cc_basename in ++ icc* | ecc* | ifort*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-static' ++ ;; ++ pgcc* | pgf77* | pgf90* | pgf95*) ++ # Portland Group compilers (*not* the Pentium gcc compiler, ++ # which looks to be a dead project) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-fpic' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ccc*) ++ lt_prog_compiler_wl='-Wl,' ++ # All Alpha code is PIC. ++ lt_prog_compiler_static='-non_shared' ++ ;; ++ xl*) ++ # IBM XL C 8.0/Fortran 10.1 on PPC ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-qpic' ++ lt_prog_compiler_static='-qstaticlink' ++ ;; ++ *) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C 5.9 ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ lt_prog_compiler_wl='-Wl,' ++ ;; ++ *Sun\ F*) ++ # Sun Fortran 8.3 passes all unrecognized flags to the linker ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ lt_prog_compiler_wl='' ++ ;; ++ esac ++ ;; ++ esac ++ ;; ++ ++ newsos6) ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ++ *nto* | *qnx*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ lt_prog_compiler_pic='-fPIC -shared' ++ ;; ++ ++ osf3* | osf4* | osf5*) ++ lt_prog_compiler_wl='-Wl,' ++ # All OSF/1 code is PIC. ++ lt_prog_compiler_static='-non_shared' ++ ;; ++ ++ rdos*) ++ lt_prog_compiler_static='-non_shared' ++ ;; ++ ++ solaris*) ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ case $cc_basename in ++ f77* | f90* | f95*) ++ lt_prog_compiler_wl='-Qoption ld ';; ++ *) ++ lt_prog_compiler_wl='-Wl,';; ++ esac ++ ;; ++ ++ sunos4*) ++ lt_prog_compiler_wl='-Qoption ld ' ++ lt_prog_compiler_pic='-PIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ++ sysv4 | sysv4.2uw2* | sysv4.3*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec ;then ++ lt_prog_compiler_pic='-Kconform_pic' ++ lt_prog_compiler_static='-Bstatic' ++ fi ++ ;; ++ ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ++ unicos*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_can_build_shared=no ++ ;; ++ ++ uts4*) ++ lt_prog_compiler_pic='-pic' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ++ *) ++ lt_prog_compiler_can_build_shared=no ++ ;; ++ esac ++ fi ++ ++case $host_os in ++ # For platforms which do not support PIC, -DPIC is meaningless: ++ *djgpp*) ++ lt_prog_compiler_pic= ++ ;; ++ *) ++ lt_prog_compiler_pic="$lt_prog_compiler_pic@&t@ -DPIC" ++ ;; ++esac ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic" >&6; } ++ ++ ++ ++ ++ ++ ++# ++# Check to make sure the PIC flag actually works. ++# ++if test -n "$lt_prog_compiler_pic"; then ++ { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_pic_works+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_pic_works=no ++ ac_outfile=conftest.$ac_objext ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="$lt_prog_compiler_pic@&t@ -DPIC" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&5 ++ echo "$as_me:__oline__: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_pic_works=yes ++ fi ++ fi ++ $RM conftest* ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6; } ++ ++if test x"$lt_cv_prog_compiler_pic_works" = xyes; then ++ case $lt_prog_compiler_pic in ++ "" | " "*) ;; ++ *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; ++ esac ++else ++ lt_prog_compiler_pic= ++ lt_prog_compiler_can_build_shared=no ++fi ++ ++fi ++ ++ ++ ++ ++ ++ ++# ++# Check to make sure the static flag actually works. ++# ++wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" ++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_static_works+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_static_works=no ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS $lt_tmp_static_flag" ++ echo "$lt_simple_link_test_code" > conftest.$ac_ext ++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then ++ # The linker can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ if test -s conftest.err; then ++ # Append any errors to the config.log. ++ cat conftest.err 1>&5 ++ $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_static_works=yes ++ fi ++ else ++ lt_cv_prog_compiler_static_works=yes ++ fi ++ fi ++ $RM -r conftest* ++ LDFLAGS="$save_LDFLAGS" ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6; } ++ ++if test x"$lt_cv_prog_compiler_static_works" = xyes; then ++ : ++else ++ lt_prog_compiler_static= ++fi ++ ++ ++ ++ ++ ++ ++ ++ { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_c_o+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_c_o=no ++ $RM -r conftest 2>/dev/null ++ mkdir conftest ++ cd conftest ++ mkdir out ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ lt_compiler_flag="-o out/conftest2.$ac_objext" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>out/conftest.err) ++ ac_status=$? ++ cat out/conftest.err >&5 ++ echo "$as_me:__oline__: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s out/conftest2.$ac_objext ++ then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_c_o=yes ++ fi ++ fi ++ chmod u+w . 2>&5 ++ $RM conftest* ++ # SGI C++ compiler will create directory out/ii_files/ for ++ # template instantiation ++ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files ++ $RM out/* && rmdir out ++ cd .. ++ $RM -r conftest ++ $RM conftest* ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } ++ ++ ++ ++ ++ ++ ++ { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_c_o+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_c_o=no ++ $RM -r conftest 2>/dev/null ++ mkdir conftest ++ cd conftest ++ mkdir out ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ lt_compiler_flag="-o out/conftest2.$ac_objext" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>out/conftest.err) ++ ac_status=$? ++ cat out/conftest.err >&5 ++ echo "$as_me:__oline__: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s out/conftest2.$ac_objext ++ then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_c_o=yes ++ fi ++ fi ++ chmod u+w . 2>&5 ++ $RM conftest* ++ # SGI C++ compiler will create directory out/ii_files/ for ++ # template instantiation ++ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files ++ $RM out/* && rmdir out ++ cd .. ++ $RM -r conftest ++ $RM conftest* ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } ++ ++ ++ ++ ++hard_links="nottested" ++if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then ++ # do not overwrite the value of need_locks provided by the user ++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } ++ hard_links=yes ++ $RM conftest* ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ touch conftest.a ++ ln conftest.a conftest.b 2>&5 || hard_links=no ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ { echo "$as_me:$LINENO: result: $hard_links" >&5 ++echo "${ECHO_T}$hard_links" >&6; } ++ if test "$hard_links" = no; then ++ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 ++echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} ++ need_locks=warn ++ fi ++else ++ need_locks=no ++fi ++ ++ ++ ++ ++ ++ ++ { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } ++ ++ runpath_var= ++ allow_undefined_flag= ++ always_export_symbols=no ++ archive_cmds= ++ archive_expsym_cmds= ++ compiler_needs_object=no ++ enable_shared_with_static_runtimes=no ++ export_dynamic_flag_spec= ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ hardcode_automatic=no ++ hardcode_direct=no ++ hardcode_direct_absolute=no ++ hardcode_libdir_flag_spec= ++ hardcode_libdir_flag_spec_ld= ++ hardcode_libdir_separator= ++ hardcode_minus_L=no ++ hardcode_shlibpath_var=unsupported ++ inherit_rpath=no ++ link_all_deplibs=unknown ++ module_cmds= ++ module_expsym_cmds= ++ old_archive_from_new_cmds= ++ old_archive_from_expsyms_cmds= ++ thread_safe_flag_spec= ++ whole_archive_flag_spec= ++ # include_expsyms should be a list of space-separated symbols to be *always* ++ # included in the symbol list ++ include_expsyms= ++ # exclude_expsyms can be an extended regexp of symbols to exclude ++ # it will be wrapped by ` (' and `)$', so one must not match beginning or ++ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', ++ # as well as any symbol that contains `d'. ++ exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' ++ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out ++ # platforms (ab)use it in PIC code, but their linkers get confused if ++ # the symbol is explicitly referenced. Since portable code cannot ++ # rely on this symbol name, it's probably fine to never include it in ++ # preloaded symbol tables. ++ # Exclude shared library initialization/finalization symbols. ++ extract_expsyms_cmds= ++ ++ case $host_os in ++ cygwin* | mingw* | pw32*) ++ # FIXME: the MSVC++ port hasn't been tested in a loooong time ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ if test "$GCC" != yes; then ++ with_gnu_ld=no ++ fi ++ ;; ++ interix*) ++ # we just hope/assume this is gcc and not c89 (= MSVC++) ++ with_gnu_ld=yes ++ ;; ++ openbsd*) ++ with_gnu_ld=no ++ ;; ++ esac ++ ++ ld_shlibs=yes ++ if test "$with_gnu_ld" = yes; then ++ # If archive_cmds runs LD, not CC, wlarc should be empty ++ wlarc='${wl}' ++ ++ # Set some defaults for GNU ld with shared library support. These ++ # are reset later if shared libraries are not supported. Putting them ++ # here allows them to be overridden if necessary. ++ runpath_var=LD_RUN_PATH ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ export_dynamic_flag_spec='${wl}--export-dynamic' ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then ++ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ whole_archive_flag_spec= ++ fi ++ supports_anon_versioning=no ++ case `$LD -v 2>&1` in ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 ++ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... ++ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... ++ *\ 2.11.*) ;; # other 2.11 versions ++ *) supports_anon_versioning=yes ;; ++ esac ++ ++ # See if GNU ld supports shared libraries. ++ case $host_os in ++ aix[3-9]*) ++ # On AIX/PPC, the GNU linker is very broken ++ if test "$host_cpu" != ia64; then ++ ld_shlibs=no ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: the GNU linker, at least up to release 2.9.1, is reported ++*** to be unable to reliably create shared libraries on AIX. ++*** Therefore, libtool is disabling shared libraries support. If you ++*** really care for shared libraries, you may want to modify your PATH ++*** so that a non-GNU linker is found, and then restart. ++ ++_LT_EOF ++ fi ++ ;; ++ ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='' ++ ;; ++ m68k) ++ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_minus_L=yes ++ ;; ++ esac ++ ;; ++ ++ beos*) ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ allow_undefined_flag=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ ++ cygwin* | mingw* | pw32*) ++ # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, ++ # as there is no search path for DLLs. ++ hardcode_libdir_flag_spec='-L$libdir' ++ allow_undefined_flag=unsupported ++ always_export_symbols=no ++ enable_shared_with_static_runtimes=yes ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' ++ ++ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ # If the export-symbols file already is a .def file (1st line ++ # is EXPORTS), use it as is; otherwise, prepend... ++ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ cp $export_symbols $output_objdir/$soname.def; ++ else ++ echo EXPORTS > $output_objdir/$soname.def; ++ cat $export_symbols >> $output_objdir/$soname.def; ++ fi~ ++ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ ++ interix[3-9]*) ++ hardcode_direct=no ++ hardcode_shlibpath_var=no ++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; ++ ++ gnu* | linux* | tpf* | k*bsd*-gnu) ++ tmp_diet=no ++ if test "$host_os" = linux-dietlibc; then ++ case $cc_basename in ++ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) ++ esac ++ fi ++ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ ++ && test "$tmp_diet" = no ++ then ++ tmp_addflag= ++ tmp_sharedflag='-shared' ++ case $cc_basename,$host_cpu in ++ pgcc*) # Portland Group C compiler ++ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag' ++ ;; ++ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers ++ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag -Mnomain' ;; ++ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 ++ tmp_addflag=' -i_dynamic' ;; ++ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 ++ tmp_addflag=' -i_dynamic -nofor_main' ;; ++ ifc* | ifort*) # Intel Fortran compiler ++ tmp_addflag=' -nofor_main' ;; ++ xl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) ++ tmp_sharedflag='-qmkshrobj' ++ tmp_addflag= ;; ++ esac ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) # Sun C 5.9 ++ whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ compiler_needs_object=yes ++ tmp_sharedflag='-G' ;; ++ *Sun\ F*) # Sun Fortran 8.3 ++ tmp_sharedflag='-G' ;; ++ esac ++ archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ ++ if test "x$supports_anon_versioning" = xyes; then ++ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' ++ fi ++ ++ case $cc_basename in ++ xlf*) ++ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself ++ whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' ++ hardcode_libdir_flag_spec= ++ hardcode_libdir_flag_spec_ld='-rpath $libdir' ++ archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' ++ if test "x$supports_anon_versioning" = xyes; then ++ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' ++ fi ++ ;; ++ esac ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' ++ wlarc= ++ else ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ fi ++ ;; ++ ++ solaris*) ++ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then ++ ld_shlibs=no ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: The releases 2.8.* of the GNU linker cannot reliably ++*** create shared libraries on Solaris systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.9.1 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. ++ ++_LT_EOF ++ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ ++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) ++ case `$LD -v 2>&1` in ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ++ ld_shlibs=no ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not ++*** reliably create shared libraries on SCO systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.16.91.0.3 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. ++ ++_LT_EOF ++ ;; ++ *) ++ # For security reasons, it is highly recommended that you always ++ # use absolute paths for naming shared libraries, and exclude the ++ # DT_RUNPATH tag from executables and libraries. But doing so ++ # requires that you compile everything twice, which is a pain. ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ esac ++ ;; ++ ++ sunos4*) ++ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ wlarc= ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ ;; ++ ++ *) ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ esac ++ ++ if test "$ld_shlibs" = no; then ++ runpath_var= ++ hardcode_libdir_flag_spec= ++ export_dynamic_flag_spec= ++ whole_archive_flag_spec= ++ fi ++ else ++ # PORTME fill in a description of your system's linker (not GNU ld) ++ case $host_os in ++ aix3*) ++ allow_undefined_flag=unsupported ++ always_export_symbols=yes ++ archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' ++ # Note: this linker hardcodes the directories in LIBPATH if there ++ # are no directories specified by -L. ++ hardcode_minus_L=yes ++ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then ++ # Neither direct hardcoding nor static linking is supported with a ++ # broken collect2. ++ hardcode_direct=unsupported ++ fi ++ ;; ++ ++ aix[4-9]*) ++ if test "$host_cpu" = ia64; then ++ # On IA64, the linker does run time linking by default, so we don't ++ # have to do anything special. ++ aix_use_runtimelinking=no ++ exp_sym_flag='-Bexport' ++ no_entry_flag="" ++ else ++ # If we're using GNU nm, then we don't want the "-C" option. ++ # -C means demangle to AIX nm, but means don't demangle with GNU nm ++ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then ++ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ else ++ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ fi ++ aix_use_runtimelinking=no ++ ++ # Test if we are trying to use run time linking or normal ++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we ++ # need to do runtime linking. ++ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) ++ for ld_flag in $LDFLAGS; do ++ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then ++ aix_use_runtimelinking=yes ++ break ++ fi ++ done ++ ;; ++ esac ++ ++ exp_sym_flag='-bexport' ++ no_entry_flag='-bnoentry' ++ fi ++ ++ # When large executables or shared objects are built, AIX ld can ++ # have problems creating the table of contents. If linking a library ++ # or program results in "error TOC overflow" add -mminimal-toc to ++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not ++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. ++ ++ archive_cmds='' ++ hardcode_direct=yes ++ hardcode_direct_absolute=yes ++ hardcode_libdir_separator=':' ++ link_all_deplibs=yes ++ file_list_spec='${wl}-f,' ++ ++ if test "$GCC" = yes; then ++ case $host_os in aix4.[012]|aix4.[012].*) ++ # We only want to do this on AIX 4.2 and lower, the check ++ # below for broken collect2 doesn't work under 4.3+ ++ collect2name=`${CC} -print-prog-name=collect2` ++ if test -f "$collect2name" && ++ strings "$collect2name" | $GREP resolve_lib_name >/dev/null ++ then ++ # We have reworked collect2 ++ : ++ else ++ # We have old collect2 ++ hardcode_direct=unsupported ++ # It fails to find uninstalled libraries when the uninstalled ++ # path is not listed in the libpath. Setting hardcode_minus_L ++ # to unsupported forces relinking ++ hardcode_minus_L=yes ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_libdir_separator= ++ fi ++ ;; ++ esac ++ shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi ++ link_all_deplibs=no ++ else ++ # not using gcc ++ if test "$host_cpu" = ia64; then ++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release ++ # chokes on -Wl,-G. The following line is correct: ++ shared_flag='-G' ++ else ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag='${wl}-G' ++ else ++ shared_flag='${wl}-bM:SRE' ++ fi ++ fi ++ fi ++ ++ # It seems that -bexpall does not export symbols beginning with ++ # underscore (_), so it is better to generate a list of symbols to export. ++ always_export_symbols=yes ++ if test "$aix_use_runtimelinking" = yes; then ++ # Warning - without using the other runtime loading flags (-brtl), ++ # -berok will link without error, but may produce a broken library. ++ allow_undefined_flag='-berok' ++ # Determine the default libpath from the value encoded in an ++ # empty executable. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ++lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *\(.*\)$/\1/ ++ p ++ } ++ }' ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then ++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++fi ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ ++ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" ++ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ else ++ if test "$host_cpu" = ia64; then ++ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' ++ allow_undefined_flag="-z nodefs" ++ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" ++ else ++ # Determine the default libpath from the value encoded in an ++ # empty executable. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ++lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *\(.*\)$/\1/ ++ p ++ } ++ }' ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then ++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++fi ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ ++ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" ++ # Warning - without using the other run time loading flags, ++ # -berok will link without error, but may produce a broken library. ++ no_undefined_flag=' ${wl}-bernotok' ++ allow_undefined_flag=' ${wl}-berok' ++ # Exported symbols can be pulled into shared objects from archives ++ whole_archive_flag_spec='$convenience' ++ archive_cmds_need_lc=yes ++ # This is similar to how AIX traditionally builds its shared libraries. ++ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ fi ++ fi ++ ;; ++ ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='' ++ ;; ++ m68k) ++ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_minus_L=yes ++ ;; ++ esac ++ ;; ++ ++ bsdi[45]*) ++ export_dynamic_flag_spec=-rdynamic ++ ;; ++ ++ cygwin* | mingw* | pw32*) ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ # hardcode_libdir_flag_spec is actually meaningless, as there is ++ # no search path for DLLs. ++ hardcode_libdir_flag_spec=' ' ++ allow_undefined_flag=unsupported ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' ++ # The linker will automatically build a .lib file if we build a DLL. ++ old_archive_from_new_cmds='true' ++ # FIXME: Should let the user specify the lib program. ++ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' ++ fix_srcfile_path='`cygpath -w "$srcfile"`' ++ enable_shared_with_static_runtimes=yes ++ ;; ++ ++ darwin* | rhapsody*) ++ ++ ++ archive_cmds_need_lc=no ++ hardcode_direct=no ++ hardcode_automatic=yes ++ hardcode_shlibpath_var=unsupported ++ whole_archive_flag_spec='' ++ link_all_deplibs=yes ++ allow_undefined_flag="$_lt_dar_allow_undefined" ++ if test "$GCC" = "yes"; then ++ output_verbose_link_cmd=echo ++ archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" ++ module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" ++ archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" ++ module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" ++ ++ else ++ ld_shlibs=no ++ fi ++ ++ ;; ++ ++ dgux*) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_shlibpath_var=no ++ ;; ++ ++ freebsd1*) ++ ld_shlibs=no ++ ;; ++ ++ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor ++ # support. Future versions do this automatically, but an explicit c++rt0.o ++ # does not break anything, and helps significantly (at the cost of a little ++ # extra space). ++ freebsd2.2*) ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ ;; ++ ++ # Unfortunately, older versions of FreeBSD 2 do not have this feature. ++ freebsd2*) ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=yes ++ hardcode_minus_L=yes ++ hardcode_shlibpath_var=no ++ ;; ++ ++ # FreeBSD 3 and greater uses gcc -shared to do shared libraries. ++ freebsd* | dragonfly*) ++ archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ ;; ++ ++ hpux9*) ++ if test "$GCC" = yes; then ++ archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ else ++ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ fi ++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator=: ++ hardcode_direct=yes ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L=yes ++ export_dynamic_flag_spec='${wl}-E' ++ ;; ++ ++ hpux10*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ if test "$with_gnu_ld" = no; then ++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ++ hardcode_libdir_flag_spec_ld='+b $libdir' ++ hardcode_libdir_separator=: ++ hardcode_direct=yes ++ hardcode_direct_absolute=yes ++ export_dynamic_flag_spec='${wl}-E' ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L=yes ++ fi ++ ;; ++ ++ hpux11*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ else ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ fi ++ if test "$with_gnu_ld" = no; then ++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator=: ++ ++ case $host_cpu in ++ hppa*64*|ia64*) ++ hardcode_direct=no ++ hardcode_shlibpath_var=no ++ ;; ++ *) ++ hardcode_direct=yes ++ hardcode_direct_absolute=yes ++ export_dynamic_flag_spec='${wl}-E' ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L=yes ++ ;; ++ esac ++ fi ++ ;; ++ ++ irix5* | irix6* | nonstopux*) ++ if test "$GCC" = yes; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ # Try to use the -exported_symbol ld option, if it does not ++ # work, assume that -exports_file does not work either and ++ # implicitly export all symbols. ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" ++ cat >conftest.$ac_ext <<_ACEOF ++int foo(void) {} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' ++ ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ LDFLAGS="$save_LDFLAGS" ++ else ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' ++ fi ++ archive_cmds_need_lc='no' ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator=: ++ inherit_rpath=yes ++ link_all_deplibs=yes ++ ;; ++ ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out ++ else ++ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF ++ fi ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ ;; ++ ++ newsos6) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=yes ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator=: ++ hardcode_shlibpath_var=no ++ ;; ++ ++ *nto* | *qnx*) ++ ;; ++ ++ openbsd*) ++ if test -f /usr/libexec/ld.so; then ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ hardcode_direct_absolute=yes ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' ++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec='${wl}-E' ++ else ++ case $host_os in ++ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec='-R$libdir' ++ ;; ++ *) ++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ ;; ++ esac ++ fi ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ ++ os2*) ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_minus_L=yes ++ allow_undefined_flag=unsupported ++ archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' ++ old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ++ ;; ++ ++ osf3*) ++ if test "$GCC" = yes; then ++ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ allow_undefined_flag=' -expect_unresolved \*' ++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ fi ++ archive_cmds_need_lc='no' ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator=: ++ ;; ++ ++ osf4* | osf5*) # as osf3* with the addition of -msym flag ++ if test "$GCC" = yes; then ++ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ else ++ allow_undefined_flag=' -expect_unresolved \*' ++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ ++ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' ++ ++ # Both c and cxx compiler support -rpath directly ++ hardcode_libdir_flag_spec='-rpath $libdir' ++ fi ++ archive_cmds_need_lc='no' ++ hardcode_libdir_separator=: ++ ;; ++ ++ solaris*) ++ no_undefined_flag=' -z defs' ++ if test "$GCC" = yes; then ++ wlarc='${wl}' ++ archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ++ else ++ case `$CC -V 2>&1` in ++ *"Compilers 5.0"*) ++ wlarc='' ++ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ++ ;; ++ *) ++ wlarc='${wl}' ++ archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ++ ;; ++ esac ++ fi ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_shlibpath_var=no ++ case $host_os in ++ solaris2.[0-5] | solaris2.[0-5].*) ;; ++ *) ++ # The compiler driver will combine and reorder linker options, ++ # but understands `-z linker_flag'. GCC discards it without `$wl', ++ # but is careful enough not to reorder. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ if test "$GCC" = yes; then ++ whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ++ else ++ whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ++ fi ++ ;; ++ esac ++ link_all_deplibs=yes ++ ;; ++ ++ sunos4*) ++ if test "x$host_vendor" = xsequent; then ++ # Use $CC to link under sequent, because it throws in some extra .o ++ # files that make .init and .fini sections work. ++ archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_direct=yes ++ hardcode_minus_L=yes ++ hardcode_shlibpath_var=no ++ ;; ++ ++ sysv4) ++ case $host_vendor in ++ sni) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=yes # is this really true??? ++ ;; ++ siemens) ++ ## LD is ld it makes a PLAMLIB ++ ## CC just makes a GrossModule. ++ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' ++ reload_cmds='$CC -r -o $output$reload_objs' ++ hardcode_direct=no ++ ;; ++ motorola) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=no #Motorola manual says yes, but my tests say they lie ++ ;; ++ esac ++ runpath_var='LD_RUN_PATH' ++ hardcode_shlibpath_var=no ++ ;; ++ ++ sysv4.3*) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_shlibpath_var=no ++ export_dynamic_flag_spec='-Bexport' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_shlibpath_var=no ++ runpath_var=LD_RUN_PATH ++ hardcode_runpath_var=yes ++ ld_shlibs=yes ++ fi ++ ;; ++ ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) ++ no_undefined_flag='${wl}-z,text' ++ archive_cmds_need_lc=no ++ hardcode_shlibpath_var=no ++ runpath_var='LD_RUN_PATH' ++ ++ if test "$GCC" = yes; then ++ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; ++ ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ no_undefined_flag='${wl}-z,text' ++ allow_undefined_flag='${wl}-z,nodefs' ++ archive_cmds_need_lc=no ++ hardcode_shlibpath_var=no ++ hardcode_libdir_flag_spec='${wl}-R,$libdir' ++ hardcode_libdir_separator=':' ++ link_all_deplibs=yes ++ export_dynamic_flag_spec='${wl}-Bexport' ++ runpath_var='LD_RUN_PATH' ++ ++ if test "$GCC" = yes; then ++ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; ++ ++ uts4*) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_shlibpath_var=no ++ ;; ++ ++ *) ++ ld_shlibs=no ++ ;; ++ esac ++ ++ if test x$host_vendor = xsni; then ++ case $host in ++ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) ++ export_dynamic_flag_spec='${wl}-Blargedynsym' ++ ;; ++ esac ++ fi ++ fi ++ ++{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5 ++echo "${ECHO_T}$ld_shlibs" >&6; } ++test "$ld_shlibs" = no && can_build_shared=no ++ ++with_gnu_ld=$with_gnu_ld ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++# ++# Do we need to explicitly link libc? ++# ++case "x$archive_cmds_need_lc" in ++x|xyes) ++ # Assume -lc should be added ++ archive_cmds_need_lc=yes ++ ++ if test "$enable_shared" = yes && test "$GCC" = yes; then ++ case $archive_cmds in ++ *'~'*) ++ # FIXME: we may have to deal with multi-command sequences. ++ ;; ++ '$CC '*) ++ # Test whether the compiler implicitly links with -lc since on some ++ # systems, -lgcc has to come before -lc. If gcc already passes -lc ++ # to ld, don't add -lc before -lgcc. ++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } ++ $RM conftest* ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } 2>conftest.err; then ++ soname=conftest ++ lib=conftest ++ libobjs=conftest.$ac_objext ++ deplibs= ++ wl=$lt_prog_compiler_wl ++ pic_flag=$lt_prog_compiler_pic ++ compiler_flags=-v ++ linker_flags=-v ++ verstring= ++ output_objdir=. ++ libname=conftest ++ lt_save_allow_undefined_flag=$allow_undefined_flag ++ allow_undefined_flag= ++ if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 ++ (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++ then ++ archive_cmds_need_lc=no ++ else ++ archive_cmds_need_lc=yes ++ fi ++ allow_undefined_flag=$lt_save_allow_undefined_flag ++ else ++ cat conftest.err 1>&5 ++ fi ++ $RM conftest* ++ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 ++echo "${ECHO_T}$archive_cmds_need_lc" >&6; } ++ ;; ++ esac ++ fi ++ ;; ++esac ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ { echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 ++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } ++ ++if test "$GCC" = yes; then ++ case $host_os in ++ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; ++ *) lt_awk_arg="/^libraries:/" ;; ++ esac ++ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then ++ # if the path contains ";" then we assume it to be the separator ++ # otherwise default to the standard path separator (i.e. ":") - it is ++ # assumed that no part of a normal pathname contains ";" but that should ++ # okay in the real world where ";" in dirpaths is itself problematic. ++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ # Ok, now we have the path, separated by spaces, we can step through it ++ # and add multilib dir if necessary. ++ lt_tmp_lt_search_path_spec= ++ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` ++ for lt_sys_path in $lt_search_path_spec; do ++ if test -d "$lt_sys_path/$lt_multi_os_dir"; then ++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" ++ else ++ test -d "$lt_sys_path" && \ ++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" ++ fi ++ done ++ lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' ++BEGIN {RS=" "; FS="/|\n";} { ++ lt_foo=""; ++ lt_count=0; ++ for (lt_i = NF; lt_i > 0; lt_i--) { ++ if ($lt_i != "" && $lt_i != ".") { ++ if ($lt_i == "..") { ++ lt_count++; ++ } else { ++ if (lt_count == 0) { ++ lt_foo="/" $lt_i lt_foo; ++ } else { ++ lt_count--; ++ } ++ } ++ } ++ } ++ if (lt_foo != "") { lt_freq[lt_foo]++; } ++ if (lt_freq[lt_foo] == 1) { print lt_foo; } ++}'` ++ sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` ++else ++ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" ++fi ++library_names_spec= ++libname_spec='lib$name' ++soname_spec= ++shrext_cmds=".so" ++postinstall_cmds= ++postuninstall_cmds= ++finish_cmds= ++finish_eval= ++shlibpath_var= ++shlibpath_overrides_runpath=unknown ++version_type=none ++dynamic_linker="$host_os ld.so" ++sys_lib_dlsearch_path_spec="/lib /usr/lib" ++need_lib_prefix=unknown ++hardcode_into_libs=no ++ ++# when you set need_version to no, make sure it does not cause -set_version ++# flags to be left without arguments ++need_version=unknown ++ ++case $host_os in ++aix3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' ++ shlibpath_var=LIBPATH ++ ++ # AIX 3 has no versioning support, so we append a major version to the name. ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; ++ ++aix[4-9]*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ hardcode_into_libs=yes ++ if test "$host_cpu" = ia64; then ++ # AIX 5 supports IA64 ++ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ else ++ # With GCC up to 2.95.x, collect2 would create an import file ++ # for dependence libraries. The import file would start with ++ # the line `#! .'. This would cause the generated library to ++ # depend on `.', always an invalid library. This was fixed in ++ # development snapshots of GCC prior to 3.0. ++ case $host_os in ++ aix4 | aix4.[01] | aix4.[01].*) ++ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' ++ echo ' yes ' ++ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then ++ : ++ else ++ can_build_shared=no ++ fi ++ ;; ++ esac ++ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct ++ # soname into executable. Probably we can add versioning support to ++ # collect2, so additional links can be useful in future. ++ if test "$aix_use_runtimelinking" = yes; then ++ # If using run time linking (on AIX 4.2 or later) use lib.so ++ # instead of lib.a to let people know that these are not ++ # typical AIX shared libraries. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ else ++ # We preserve .a as extension for shared libraries through AIX4.2 ++ # and later when we are not doing run time linking. ++ library_names_spec='${libname}${release}.a $libname.a' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ fi ++ shlibpath_var=LIBPATH ++ fi ++ ;; ++ ++amigaos*) ++ case $host_cpu in ++ powerpc) ++ # Since July 2007 AmigaOS4 officially supports .so libraries. ++ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ ;; ++ m68k) ++ library_names_spec='$libname.ixlibrary $libname.a' ++ # Create ${libname}_ixlibrary.a entries in /sys/libs. ++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ++ ;; ++ esac ++ ;; ++ ++beos*) ++ library_names_spec='${libname}${shared_ext}' ++ dynamic_linker="$host_os ld.so" ++ shlibpath_var=LIBRARY_PATH ++ ;; ++ ++bsdi[45]*) ++ version_type=linux ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" ++ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" ++ # the default ld.so.conf also contains /usr/contrib/lib and ++ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow ++ # libtool to hard-code these into programs ++ ;; ++ ++cygwin* | mingw* | pw32*) ++ version_type=windows ++ shrext_cmds=".dll" ++ need_version=no ++ need_lib_prefix=no ++ ++ case $GCC,$host_os in ++ yes,cygwin* | yes,mingw* | yes,pw32*) ++ library_names_spec='$libname.dll.a' ++ # DLL is installed to $(libdir)/../bin by postinstall_cmds ++ postinstall_cmds='base_file=`basename \${file}`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ ++ dldir=$destdir/`dirname \$dlpath`~ ++ test -d \$dldir || mkdir -p \$dldir~ ++ $install_prog $dir/$dlname \$dldir/$dlname~ ++ chmod a+x \$dldir/$dlname~ ++ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then ++ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; ++ fi' ++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ ++ dlpath=$dir/\$dldll~ ++ $RM \$dlpath' ++ shlibpath_overrides_runpath=yes ++ ++ case $host_os in ++ cygwin*) ++ # Cygwin DLLs use 'cyg' prefix rather than 'lib' ++ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ++ ;; ++ mingw*) ++ # MinGW DLLs use traditional 'lib' prefix ++ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then ++ # It is most probably a Windows format PATH printed by ++ # mingw gcc, but we are running on Cygwin. Gcc prints its search ++ # path with ; separators, and with drive letters. We can handle the ++ # drive letters (cygwin fileutils understands them), so leave them, ++ # especially as we might pass files found there to a mingw objdump, ++ # which wouldn't understand a cygwinified path. Ahh. ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ ;; ++ pw32*) ++ # pw32 DLLs use 'pw' prefix rather than 'lib' ++ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ ;; ++ esac ++ ;; ++ ++ *) ++ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ++ ;; ++ esac ++ dynamic_linker='Win32 ld.exe' ++ # FIXME: first we should search . and the directory the executable is in ++ shlibpath_var=PATH ++ ;; ++ ++darwin* | rhapsody*) ++ dynamic_linker="$host_os dyld" ++ version_type=darwin ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' ++ soname_spec='${libname}${release}${major}$shared_ext' ++ shlibpath_overrides_runpath=yes ++ shlibpath_var=DYLD_LIBRARY_PATH ++ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' ++ ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" ++ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ++ ;; ++ ++dgux*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; ++ ++freebsd1*) ++ dynamic_linker=no ++ ;; ++ ++freebsd* | dragonfly*) ++ # DragonFly does not have aout. When/if they implement a new ++ # versioning mechanism, adjust this. ++ if test -x /usr/bin/objformat; then ++ objformat=`/usr/bin/objformat` ++ else ++ case $host_os in ++ freebsd[123]*) objformat=aout ;; ++ *) objformat=elf ;; ++ esac ++ fi ++ version_type=freebsd-$objformat ++ case $version_type in ++ freebsd-elf*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ need_version=no ++ need_lib_prefix=no ++ ;; ++ freebsd-*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' ++ need_version=yes ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_os in ++ freebsd2*) ++ shlibpath_overrides_runpath=yes ++ ;; ++ freebsd3.[01]* | freebsdelf3.[01]*) ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ ++ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ *) # from 4.6 on, and DragonFly ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ esac ++ ;; ++ ++gnu*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ ;; ++ ++hpux9* | hpux10* | hpux11*) ++ # Give a soname corresponding to the major version so that dld.sl refuses to ++ # link against other versions. ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ case $host_cpu in ++ ia64*) ++ shrext_cmds='.so' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.so" ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ if test "X$HPUX_IA64_MODE" = X32; then ++ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" ++ else ++ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" ++ fi ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ hppa*64*) ++ shrext_cmds='.sl' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ *) ++ shrext_cmds='.sl' ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=SHLIB_PATH ++ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; ++ esac ++ # HP-UX runs *really* slowly unless shared libraries are mode 555. ++ postinstall_cmds='chmod 555 $lib' ++ ;; ++ ++interix[3-9]*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ ++irix5* | irix6* | nonstopux*) ++ case $host_os in ++ nonstopux*) version_type=nonstopux ;; ++ *) ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ version_type=linux ++ else ++ version_type=irix ++ fi ;; ++ esac ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' ++ case $host_os in ++ irix5* | nonstopux*) ++ libsuff= shlibsuff= ++ ;; ++ *) ++ case $LD in # libtool.m4 will add one of these switches to LD ++ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") ++ libsuff= shlibsuff= libmagic=32-bit;; ++ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") ++ libsuff=32 shlibsuff=N32 libmagic=N32;; ++ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") ++ libsuff=64 shlibsuff=64 libmagic=64-bit;; ++ *) libsuff= shlibsuff= libmagic=never-match;; ++ esac ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" ++ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" ++ hardcode_into_libs=yes ++ ;; ++ ++# No shared lib support for Linux oldld, aout, or coff. ++linux*oldld* | linux*aout* | linux*coff*) ++ dynamic_linker=no ++ ;; ++ ++# This must be Linux ELF. ++linux* | k*bsd*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ # Some binutils ld are patched to set DT_RUNPATH ++ save_LDFLAGS=$LDFLAGS ++ save_libdir=$libdir ++ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ ++ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then ++ shlibpath_overrides_runpath=yes ++fi ++ ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ LDFLAGS=$save_LDFLAGS ++ libdir=$save_libdir ++ ++ # This implies no fast_install, which is unacceptable. ++ # Some rework will be needed to allow for fast_install ++ # before this can be enabled. ++ hardcode_into_libs=yes ++ ++ # Append ld.so.conf contents to the search path ++ if test -f /etc/ld.so.conf; then ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" ++ fi ++ ++ # We used to test for /lib/ld.so.1 and disable shared libraries on ++ # powerpc, because MkLinux only supported shared libraries with the ++ # GNU dynamic linker. Since this was broken with cross compilers, ++ # most powerpc-linux boxes support dynamic linking these days and ++ # people can always --disable-shared, the test was removed, and we ++ # assume the GNU/Linux dynamic linker is in use. ++ dynamic_linker='GNU/Linux ld.so' ++ ;; ++ ++netbsdelf*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='NetBSD ld.elf_so' ++ ;; ++ ++netbsd*) ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ dynamic_linker='NetBSD (a.out) ld.so' ++ else ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='NetBSD ld.elf_so' ++ fi ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ ++newsos6) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ ;; ++ ++*nto* | *qnx*) ++ version_type=qnx ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='ldqnx.so' ++ ;; ++ ++openbsd*) ++ version_type=sunos ++ sys_lib_dlsearch_path_spec="/usr/lib" ++ need_lib_prefix=no ++ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. ++ case $host_os in ++ openbsd3.3 | openbsd3.3.*) need_version=yes ;; ++ *) need_version=no ;; ++ esac ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ case $host_os in ++ openbsd2.[89] | openbsd2.[89].*) ++ shlibpath_overrides_runpath=no ++ ;; ++ *) ++ shlibpath_overrides_runpath=yes ++ ;; ++ esac ++ else ++ shlibpath_overrides_runpath=yes ++ fi ++ ;; ++ ++os2*) ++ libname_spec='$name' ++ shrext_cmds=".dll" ++ need_lib_prefix=no ++ library_names_spec='$libname${shared_ext} $libname.a' ++ dynamic_linker='OS/2 ld.exe' ++ shlibpath_var=LIBPATH ++ ;; ++ ++osf3* | osf4* | osf5*) ++ version_type=osf ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" ++ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ++ ;; ++ ++rdos*) ++ dynamic_linker=no ++ ;; ++ ++solaris*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ # ldd complains unless libraries are executable ++ postinstall_cmds='chmod +x $lib' ++ ;; ++ ++sunos4*) ++ version_type=sunos ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ if test "$with_gnu_ld" = yes; then ++ need_lib_prefix=no ++ fi ++ need_version=yes ++ ;; ++ ++sysv4 | sysv4.3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_vendor in ++ sni) ++ shlibpath_overrides_runpath=no ++ need_lib_prefix=no ++ runpath_var=LD_RUN_PATH ++ ;; ++ siemens) ++ need_lib_prefix=no ++ ;; ++ motorola) ++ need_lib_prefix=no ++ need_version=no ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ++ ;; ++ esac ++ ;; ++ ++sysv4*MP*) ++ if test -d /usr/nec ;then ++ version_type=linux ++ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' ++ soname_spec='$libname${shared_ext}.$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ fi ++ ;; ++ ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ version_type=freebsd-elf ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ if test "$with_gnu_ld" = yes; then ++ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' ++ else ++ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' ++ case $host_os in ++ sco3.2v5*) ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ++ ;; ++ esac ++ fi ++ sys_lib_dlsearch_path_spec='/usr/lib' ++ ;; ++ ++tpf*) ++ # TPF is a cross-target only. Preferred cross-host = GNU/Linux. ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_name_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ ++uts4*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; ++ ++*) ++ dynamic_linker=no ++ ;; ++esac ++{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 ++echo "${ECHO_T}$dynamic_linker" >&6; } ++test "$dynamic_linker" = no && can_build_shared=no ++ ++variables_saved_for_relink="PATH $shlibpath_var $runpath_var" ++if test "$GCC" = yes; then ++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" ++fi ++ ++if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then ++ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" ++fi ++if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then ++ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ { echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } ++hardcode_action= ++if test -n "$hardcode_libdir_flag_spec" || ++ test -n "$runpath_var" || ++ test "X$hardcode_automatic" = "Xyes" ; then ++ ++ # We can hardcode non-existent directories. ++ if test "$hardcode_direct" != no && ++ # If the only mechanism to avoid hardcoding is shlibpath_var, we ++ # have to relink, otherwise we might link with an installed library ++ # when we should be linking with a yet-to-be-installed one ++ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && ++ test "$hardcode_minus_L" != no; then ++ # Linking always hardcodes the temporary library directory. ++ hardcode_action=relink ++ else ++ # We can link without hardcoding, and we can hardcode nonexisting dirs. ++ hardcode_action=immediate ++ fi ++else ++ # We cannot hardcode anything, or else we can only hardcode existing ++ # directories. ++ hardcode_action=unsupported ++fi ++{ echo "$as_me:$LINENO: result: $hardcode_action" >&5 ++echo "${ECHO_T}$hardcode_action" >&6; } ++ ++if test "$hardcode_action" = relink || ++ test "$inherit_rpath" = yes; then ++ # Fast installation is not supported ++ enable_fast_install=no ++elif test "$shlibpath_overrides_runpath" = yes || ++ test "$enable_shared" = no; then ++ # Fast installation is not necessary ++ enable_fast_install=needless ++fi ++ ++ ++ ++ ++ ++ ++ if test "x$enable_dlopen" != xyes; then ++ enable_dlopen=unknown ++ enable_dlopen_self=unknown ++ enable_dlopen_self_static=unknown ++else ++ lt_cv_dlopen=no ++ lt_cv_dlopen_libs= ++ ++ case $host_os in ++ beos*) ++ lt_cv_dlopen="load_add_on" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes ++ ;; ++ ++ mingw* | pw32*) ++ lt_cv_dlopen="LoadLibrary" ++ lt_cv_dlopen_libs= ++ ;; ++ ++ cygwin*) ++ lt_cv_dlopen="dlopen" ++ lt_cv_dlopen_libs= ++ ;; ++ ++ darwin*) ++ # if libdl is installed we need to link against it ++ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 ++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dl_dlopen+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldl $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dlopen (); ++int ++main () ++{ ++return dlopen (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dl_dlopen=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_dl_dlopen=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } ++if test $ac_cv_lib_dl_dlopen = yes; then ++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" ++else ++ ++ lt_cv_dlopen="dyld" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes ++ ++fi ++ ++ ;; ++ ++ *) ++ { echo "$as_me:$LINENO: checking for shl_load" >&5 ++echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; } ++if test "${ac_cv_func_shl_load+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define shl_load to an innocuous variant, in case declares shl_load. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define shl_load innocuous_shl_load ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char shl_load (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef shl_load ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char shl_load (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_shl_load || defined __stub___shl_load ++choke me ++#endif ++ ++int ++main () ++{ ++return shl_load (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_shl_load=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_func_shl_load=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 ++echo "${ECHO_T}$ac_cv_func_shl_load" >&6; } ++if test $ac_cv_func_shl_load = yes; then ++ lt_cv_dlopen="shl_load" ++else ++ { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 ++echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dld_shl_load+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldld $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char shl_load (); ++int ++main () ++{ ++return shl_load (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dld_shl_load=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_dld_shl_load=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 ++echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; } ++if test $ac_cv_lib_dld_shl_load = yes; then ++ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" ++else ++ { echo "$as_me:$LINENO: checking for dlopen" >&5 ++echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; } ++if test "${ac_cv_func_dlopen+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define dlopen to an innocuous variant, in case declares dlopen. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define dlopen innocuous_dlopen ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char dlopen (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef dlopen ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dlopen (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_dlopen || defined __stub___dlopen ++choke me ++#endif ++ ++int ++main () ++{ ++return dlopen (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_dlopen=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_func_dlopen=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_func_dlopen" >&6; } ++if test $ac_cv_func_dlopen = yes; then ++ lt_cv_dlopen="dlopen" ++else ++ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 ++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dl_dlopen+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldl $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dlopen (); ++int ++main () ++{ ++return dlopen (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dl_dlopen=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_dl_dlopen=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } ++if test $ac_cv_lib_dl_dlopen = yes; then ++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" ++else ++ { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 ++echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; } ++if test "${ac_cv_lib_svld_dlopen+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lsvld $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dlopen (); ++int ++main () ++{ ++return dlopen (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_svld_dlopen=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_svld_dlopen=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; } ++if test $ac_cv_lib_svld_dlopen = yes; then ++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" ++else ++ { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 ++echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dld_dld_link+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldld $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dld_link (); ++int ++main () ++{ ++return dld_link (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dld_dld_link=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_dld_dld_link=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 ++echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; } ++if test $ac_cv_lib_dld_dld_link = yes; then ++ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" ++fi ++ ++ ++fi ++ ++ ++fi ++ ++ ++fi ++ ++ ++fi ++ ++ ++fi ++ ++ ;; ++ esac ++ ++ if test "x$lt_cv_dlopen" != xno; then ++ enable_dlopen=yes ++ else ++ enable_dlopen=no ++ fi ++ ++ case $lt_cv_dlopen in ++ dlopen) ++ save_CPPFLAGS="$CPPFLAGS" ++ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" ++ ++ save_LDFLAGS="$LDFLAGS" ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" ++ ++ save_LIBS="$LIBS" ++ LIBS="$lt_cv_dlopen_libs $LIBS" ++ ++ { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 ++echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; } ++if test "${lt_cv_dlopen_self+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test "$cross_compiling" = yes; then : ++ lt_cv_dlopen_self=cross ++else ++ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 ++ lt_status=$lt_dlunknown ++ cat > conftest.$ac_ext <<_LT_EOF ++#line __oline__ "configure" ++#include "confdefs.h" ++ ++#if HAVE_DLFCN_H ++#include ++#endif ++ ++#include ++ ++#ifdef RTLD_GLOBAL ++# define LT_DLGLOBAL RTLD_GLOBAL ++#else ++# ifdef DL_GLOBAL ++# define LT_DLGLOBAL DL_GLOBAL ++# else ++# define LT_DLGLOBAL 0 ++# endif ++#endif ++ ++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we ++ find out it does not work in some platform. */ ++#ifndef LT_DLLAZY_OR_NOW ++# ifdef RTLD_LAZY ++# define LT_DLLAZY_OR_NOW RTLD_LAZY ++# else ++# ifdef DL_LAZY ++# define LT_DLLAZY_OR_NOW DL_LAZY ++# else ++# ifdef RTLD_NOW ++# define LT_DLLAZY_OR_NOW RTLD_NOW ++# else ++# ifdef DL_NOW ++# define LT_DLLAZY_OR_NOW DL_NOW ++# else ++# define LT_DLLAZY_OR_NOW 0 ++# endif ++# endif ++# endif ++# endif ++#endif ++ ++#ifdef __cplusplus ++extern "C" void exit (int); ++#endif ++ ++void fnord() { int i=42;} ++int main () ++{ ++ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); ++ int status = $lt_dlunknown; ++ ++ if (self) ++ { ++ if (dlsym (self,"fnord")) status = $lt_dlno_uscore; ++ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; ++ /* dlclose (self); */ ++ } ++ else ++ puts (dlerror ()); ++ ++ exit (status); ++} ++_LT_EOF ++ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then ++ (./conftest; exit; ) >&5 2>/dev/null ++ lt_status=$? ++ case x$lt_status in ++ x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; ++ x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; ++ x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; ++ esac ++ else : ++ # compilation failed ++ lt_cv_dlopen_self=no ++ fi ++fi ++rm -fr conftest* ++ ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 ++echo "${ECHO_T}$lt_cv_dlopen_self" >&6; } ++ ++ if test "x$lt_cv_dlopen_self" = xyes; then ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" ++ { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 ++echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; } ++if test "${lt_cv_dlopen_self_static+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test "$cross_compiling" = yes; then : ++ lt_cv_dlopen_self_static=cross ++else ++ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 ++ lt_status=$lt_dlunknown ++ cat > conftest.$ac_ext <<_LT_EOF ++#line __oline__ "configure" ++#include "confdefs.h" ++ ++#if HAVE_DLFCN_H ++#include ++#endif ++ ++#include ++ ++#ifdef RTLD_GLOBAL ++# define LT_DLGLOBAL RTLD_GLOBAL ++#else ++# ifdef DL_GLOBAL ++# define LT_DLGLOBAL DL_GLOBAL ++# else ++# define LT_DLGLOBAL 0 ++# endif ++#endif ++ ++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we ++ find out it does not work in some platform. */ ++#ifndef LT_DLLAZY_OR_NOW ++# ifdef RTLD_LAZY ++# define LT_DLLAZY_OR_NOW RTLD_LAZY ++# else ++# ifdef DL_LAZY ++# define LT_DLLAZY_OR_NOW DL_LAZY ++# else ++# ifdef RTLD_NOW ++# define LT_DLLAZY_OR_NOW RTLD_NOW ++# else ++# ifdef DL_NOW ++# define LT_DLLAZY_OR_NOW DL_NOW ++# else ++# define LT_DLLAZY_OR_NOW 0 ++# endif ++# endif ++# endif ++# endif ++#endif ++ ++#ifdef __cplusplus ++extern "C" void exit (int); ++#endif ++ ++void fnord() { int i=42;} ++int main () ++{ ++ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); ++ int status = $lt_dlunknown; ++ ++ if (self) ++ { ++ if (dlsym (self,"fnord")) status = $lt_dlno_uscore; ++ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; ++ /* dlclose (self); */ ++ } ++ else ++ puts (dlerror ()); ++ ++ exit (status); ++} ++_LT_EOF ++ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then ++ (./conftest; exit; ) >&5 2>/dev/null ++ lt_status=$? ++ case x$lt_status in ++ x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; ++ x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; ++ x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; ++ esac ++ else : ++ # compilation failed ++ lt_cv_dlopen_self_static=no ++ fi ++fi ++rm -fr conftest* ++ ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 ++echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; } ++ fi ++ ++ CPPFLAGS="$save_CPPFLAGS" ++ LDFLAGS="$save_LDFLAGS" ++ LIBS="$save_LIBS" ++ ;; ++ esac ++ ++ case $lt_cv_dlopen_self in ++ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; ++ *) enable_dlopen_self=unknown ;; ++ esac ++ ++ case $lt_cv_dlopen_self_static in ++ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; ++ *) enable_dlopen_self_static=unknown ;; ++ esac ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++striplib= ++old_striplib= ++{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 ++echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; } ++if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then ++ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" ++ test -z "$striplib" && striplib="$STRIP --strip-unneeded" ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++# FIXME - insert some real tests, host_os isn't really good enough ++ case $host_os in ++ darwin*) ++ if test -n "$STRIP" ; then ++ striplib="$STRIP -x" ++ old_striplib="$STRIP -S" ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ fi ++ ;; ++ *) ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ ;; ++ esac ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ # Report which library types will actually be built ++ { echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 ++echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; } ++ { echo "$as_me:$LINENO: result: $can_build_shared" >&5 ++echo "${ECHO_T}$can_build_shared" >&6; } ++ ++ { echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 ++echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; } ++ test "$can_build_shared" = "no" && enable_shared=no ++ ++ # On AIX, shared libraries and static libraries use the same namespace, and ++ # are all built from PIC. ++ case $host_os in ++ aix3*) ++ test "$enable_shared" = yes && enable_static=no ++ if test -n "$RANLIB"; then ++ archive_cmds="$archive_cmds~\$RANLIB \$lib" ++ postinstall_cmds='$RANLIB $lib' ++ fi ++ ;; ++ ++ aix[4-9]*) ++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then ++ test "$enable_shared" = yes && enable_static=no ++ fi ++ ;; ++ esac ++ { echo "$as_me:$LINENO: result: $enable_shared" >&5 ++echo "${ECHO_T}$enable_shared" >&6; } ++ ++ { echo "$as_me:$LINENO: checking whether to build static libraries" >&5 ++echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; } ++ # Make sure either enable_shared or enable_static is yes. ++ test "$enable_shared" = yes || enable_static=yes ++ { echo "$as_me:$LINENO: result: $enable_static" >&5 ++echo "${ECHO_T}$enable_static" >&6; } ++ ++ ++ ++ ++fi ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++CC="$lt_save_CC" ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ac_config_commands="$ac_config_commands libtool" ++ ++ ++ ++ ++# Only expand once: ++ ++ ++ ++case "$am__api_version" in ++ 1.01234) ++ { { echo "$as_me:$LINENO: error: Automake 1.5 or newer is required to use intltool" >&5 ++echo "$as_me: error: Automake 1.5 or newer is required to use intltool" >&2;} ++ { (exit 1); exit 1; }; } ++ ;; ++ *) ++ ;; ++esac ++ ++if test -n "0.35.0"; then ++ { echo "$as_me:$LINENO: checking for intltool >= 0.35.0" >&5 ++echo $ECHO_N "checking for intltool >= 0.35.0... $ECHO_C" >&6; } ++ ++ INTLTOOL_REQUIRED_VERSION_AS_INT=`echo 0.35.0 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` ++ INTLTOOL_APPLIED_VERSION=`awk -F\" '/\\$VERSION / { print $ 2; }' ${ac_aux_dir}/intltool-update.in` ++ INTLTOOL_APPLIED_VERSION_AS_INT=`awk -F\" '/\\$VERSION / { split($ 2, VERSION, "."); print VERSION[1] * 1000 + VERSION[2] * 100 + VERSION[3];}' ${ac_aux_dir}/intltool-update.in` ++ ++ { echo "$as_me:$LINENO: result: $INTLTOOL_APPLIED_VERSION found" >&5 ++echo "${ECHO_T}$INTLTOOL_APPLIED_VERSION found" >&6; } ++ test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || ++ { { echo "$as_me:$LINENO: error: Your intltool is too old. You need intltool 0.35.0 or later." >&5 ++echo "$as_me: error: Your intltool is too old. You need intltool 0.35.0 or later." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++ INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -p $(top_srcdir)/po $< $@' ++ INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u /tmp $< $@' ++ INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++# Check the gettext tools to make sure they are GNU ++# Extract the first word of "xgettext", so it can be a program name with args. ++set dummy xgettext; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_XGETTEXT+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $XGETTEXT in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_XGETTEXT="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++XGETTEXT=$ac_cv_path_XGETTEXT ++if test -n "$XGETTEXT"; then ++ { echo "$as_me:$LINENO: result: $XGETTEXT" >&5 ++echo "${ECHO_T}$XGETTEXT" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++# Extract the first word of "msgmerge", so it can be a program name with args. ++set dummy msgmerge; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_MSGMERGE+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $MSGMERGE in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_MSGMERGE="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++MSGMERGE=$ac_cv_path_MSGMERGE ++if test -n "$MSGMERGE"; then ++ { echo "$as_me:$LINENO: result: $MSGMERGE" >&5 ++echo "${ECHO_T}$MSGMERGE" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++# Extract the first word of "msgfmt", so it can be a program name with args. ++set dummy msgfmt; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_MSGFMT+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $MSGFMT in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_MSGFMT="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++MSGFMT=$ac_cv_path_MSGFMT ++if test -n "$MSGFMT"; then ++ { echo "$as_me:$LINENO: result: $MSGFMT" >&5 ++echo "${ECHO_T}$MSGFMT" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then ++ { { echo "$as_me:$LINENO: error: GNU gettext tools not found; required for intltool" >&5 ++echo "$as_me: error: GNU gettext tools not found; required for intltool" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" ++mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" ++mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" ++if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then ++ { { echo "$as_me:$LINENO: error: GNU gettext tools not found; required for intltool" >&5 ++echo "$as_me: error: GNU gettext tools not found; required for intltool" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++# Use the tools built into the package, not the ones that are installed. ++INTLTOOL_EXTRACT='$(top_builddir)/intltool-extract' ++ ++INTLTOOL_MERGE='$(top_builddir)/intltool-merge' ++ ++INTLTOOL_UPDATE='$(top_builddir)/intltool-update' ++ ++ ++# Extract the first word of "perl", so it can be a program name with args. ++set dummy perl; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_INTLTOOL_PERL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $INTLTOOL_PERL in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_INTLTOOL_PERL="$INTLTOOL_PERL" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_INTLTOOL_PERL="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++INTLTOOL_PERL=$ac_cv_path_INTLTOOL_PERL ++if test -n "$INTLTOOL_PERL"; then ++ { echo "$as_me:$LINENO: result: $INTLTOOL_PERL" >&5 ++echo "${ECHO_T}$INTLTOOL_PERL" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++if test -z "$INTLTOOL_PERL"; then ++ { { echo "$as_me:$LINENO: error: perl not found; required for intltool" >&5 ++echo "$as_me: error: perl not found; required for intltool" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "`$INTLTOOL_PERL -v | fgrep '5.' 2> /dev/null`"; then ++ { { echo "$as_me:$LINENO: error: perl 5.x required for intltool" >&5 ++echo "$as_me: error: perl 5.x required for intltool" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test "x" != "xno-xml"; then ++ { echo "$as_me:$LINENO: checking for XML::Parser" >&5 ++echo $ECHO_N "checking for XML::Parser... $ECHO_C" >&6; } ++ if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then ++ { echo "$as_me:$LINENO: result: ok" >&5 ++echo "${ECHO_T}ok" >&6; } ++ else ++ { { echo "$as_me:$LINENO: error: XML::Parser perl module is required for intltool" >&5 ++echo "$as_me: error: XML::Parser perl module is required for intltool" >&2;} ++ { (exit 1); exit 1; }; } ++ fi ++fi ++ ++# Substitute ALL_LINGUAS so we can use it in po/Makefile ++ ++ ++# Set DATADIRNAME correctly if it is not set yet ++# (copied from glib-gettext.m4) ++if test -z "$DATADIRNAME"; then ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++extern int _nl_msg_cat_cntr; ++ return _nl_msg_cat_cntr ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ DATADIRNAME=share ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ case $host in ++ *-*-solaris*) ++ { echo "$as_me:$LINENO: checking for bind_textdomain_codeset" >&5 ++echo $ECHO_N "checking for bind_textdomain_codeset... $ECHO_C" >&6; } ++if test "${ac_cv_func_bind_textdomain_codeset+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define bind_textdomain_codeset to an innocuous variant, in case declares bind_textdomain_codeset. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define bind_textdomain_codeset innocuous_bind_textdomain_codeset ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char bind_textdomain_codeset (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef bind_textdomain_codeset ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char bind_textdomain_codeset (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_bind_textdomain_codeset || defined __stub___bind_textdomain_codeset ++choke me ++#endif ++ ++int ++main () ++{ ++return bind_textdomain_codeset (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_bind_textdomain_codeset=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_func_bind_textdomain_codeset=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_bind_textdomain_codeset" >&5 ++echo "${ECHO_T}$ac_cv_func_bind_textdomain_codeset" >&6; } ++if test $ac_cv_func_bind_textdomain_codeset = yes; then ++ DATADIRNAME=share ++else ++ DATADIRNAME=lib ++fi ++ ++ ;; ++ *) ++ DATADIRNAME=lib ++ ;; ++ esac ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++ ++ ++ ++ ++ ++ac_config_commands="$ac_config_commands intltool" ++ ++ ++ ++ ++ ++ ++ # Check whether --enable-compile-warnings was given. ++if test "${enable_compile_warnings+set}" = set; then ++ enableval=$enable_compile_warnings; ++else ++ enable_compile_warnings="yes" ++fi ++ ++ ++ warnCFLAGS= ++ if test "x$GCC" != xyes; then ++ enable_compile_warnings=no ++ fi ++ ++ warning_flags= ++ realsave_CFLAGS="$CFLAGS" ++ ++ case "$enable_compile_warnings" in ++ no) ++ warning_flags= ++ ;; ++ minimum) ++ warning_flags="-Wall" ++ ;; ++ yes) ++ warning_flags="-Wall -Wmissing-prototypes" ++ ;; ++ maximum|error) ++ warning_flags="-Wall -Wmissing-prototypes -Wnested-externs -Wpointer-arith" ++ CFLAGS="$warning_flags $CFLAGS" ++ for option in -Wno-sign-compare; do ++ SAVE_CFLAGS="$CFLAGS" ++ CFLAGS="$CFLAGS $option" ++ { echo "$as_me:$LINENO: checking whether gcc understands $option" >&5 ++echo $ECHO_N "checking whether gcc understands $option... $ECHO_C" >&6; } ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ has_option=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ has_option=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ CFLAGS="$SAVE_CFLAGS" ++ { echo "$as_me:$LINENO: result: $has_option" >&5 ++echo "${ECHO_T}$has_option" >&6; } ++ if test $has_option = yes; then ++ warning_flags="$warning_flags $option" ++ fi ++ unset has_option ++ unset SAVE_CFLAGS ++ done ++ unset option ++ if test "$enable_compile_warnings" = "error" ; then ++ warning_flags="$warning_flags -Werror" ++ fi ++ ;; ++ *) ++ { { echo "$as_me:$LINENO: error: Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" >&5 ++echo "$as_me: error: Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" >&2;} ++ { (exit 1); exit 1; }; } ++ ;; ++ esac ++ CFLAGS="$realsave_CFLAGS" ++ { echo "$as_me:$LINENO: checking what warning flags to pass to the C compiler" >&5 ++echo $ECHO_N "checking what warning flags to pass to the C compiler... $ECHO_C" >&6; } ++ { echo "$as_me:$LINENO: result: $warning_flags" >&5 ++echo "${ECHO_T}$warning_flags" >&6; } ++ ++ # Check whether --enable-iso-c was given. ++if test "${enable_iso_c+set}" = set; then ++ enableval=$enable_iso_c; ++else ++ enable_iso_c=no ++fi ++ ++ ++ { echo "$as_me:$LINENO: checking what language compliance flags to pass to the C compiler" >&5 ++echo $ECHO_N "checking what language compliance flags to pass to the C compiler... $ECHO_C" >&6; } ++ complCFLAGS= ++ if test "x$enable_iso_c" != "xno"; then ++ if test "x$GCC" = "xyes"; then ++ case " $CFLAGS " in ++ *\ \ -ansi\ \ *) ;; ++ *) complCFLAGS="$complCFLAGS -ansi" ;; ++ esac ++ case " $CFLAGS " in ++ *\ \ -pedantic\ \ *) ;; ++ *) complCFLAGS="$complCFLAGS -pedantic" ;; ++ esac ++ fi ++ fi ++ { echo "$as_me:$LINENO: result: $complCFLAGS" >&5 ++echo "${ECHO_T}$complCFLAGS" >&6; } ++ ++ WARN_CFLAGS="$warning_flags $complCFLAGS" ++ ++ ++ ++ ++if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. ++set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_PKG_CONFIG+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $PKG_CONFIG in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++PKG_CONFIG=$ac_cv_path_PKG_CONFIG ++if test -n "$PKG_CONFIG"; then ++ { echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5 ++echo "${ECHO_T}$PKG_CONFIG" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_path_PKG_CONFIG"; then ++ ac_pt_PKG_CONFIG=$PKG_CONFIG ++ # Extract the first word of "pkg-config", so it can be a program name with args. ++set dummy pkg-config; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $ac_pt_PKG_CONFIG in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG ++if test -n "$ac_pt_PKG_CONFIG"; then ++ { echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5 ++echo "${ECHO_T}$ac_pt_PKG_CONFIG" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_pt_PKG_CONFIG" = x; then ++ PKG_CONFIG="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ PKG_CONFIG=$ac_pt_PKG_CONFIG ++ fi ++else ++ PKG_CONFIG="$ac_cv_path_PKG_CONFIG" ++fi ++ ++fi ++if test -n "$PKG_CONFIG"; then ++ _pkg_min_version=0.9.0 ++ { echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5 ++echo $ECHO_N "checking pkg-config is at least version $_pkg_min_version... $ECHO_C" >&6; } ++ if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ PKG_CONFIG="" ++ fi ++ ++fi ++ ++gdu_cv_version_required=0.3.2 ++ ++if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gnome-doc-utils >= \$gdu_cv_version_required\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "gnome-doc-utils >= $gdu_cv_version_required") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ gdu_cv_have_gdu=yes ++else ++ gdu_cv_have_gdu=no ++fi ++ ++if test "$gdu_cv_have_gdu" = "yes"; then ++ : ++else ++ { { echo "$as_me:$LINENO: error: gnome-doc-utils >= $gdu_cv_version_required not found" >&5 ++echo "$as_me: error: gnome-doc-utils >= $gdu_cv_version_required not found" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++ ++ ++# Check whether --with-help-dir was given. ++if test "${with_help_dir+set}" = set; then ++ withval=$with_help_dir; ++else ++ with_help_dir='${datadir}/gnome/help' ++fi ++ ++HELP_DIR="$with_help_dir" ++ ++ ++ ++# Check whether --with-omf-dir was given. ++if test "${with_omf_dir+set}" = set; then ++ withval=$with_omf_dir; ++else ++ with_omf_dir='${datadir}/omf' ++fi ++ ++OMF_DIR="$with_omf_dir" ++ ++ ++ ++# Check whether --with-help-formats was given. ++if test "${with_help_formats+set}" = set; then ++ withval=$with_help_formats; ++else ++ with_help_formats='' ++fi ++ ++DOC_USER_FORMATS="$with_help_formats" ++ ++ ++# Check whether --enable-scrollkeeper was given. ++if test "${enable_scrollkeeper+set}" = set; then ++ enableval=$enable_scrollkeeper; ++else ++ enable_scrollkeeper=yes ++fi ++ ++ ++ ++if test "$gdu_cv_have_gdu" = "yes" -a "$enable_scrollkeeper" = "yes"; then ++ ENABLE_SK_TRUE= ++ ENABLE_SK_FALSE='#' ++else ++ ENABLE_SK_TRUE='#' ++ ENABLE_SK_FALSE= ++fi ++ ++ ++DISTCHECK_CONFIGURE_FLAGS="--disable-scrollkeeper $DISTCHECK_CONFIGURE_FLAGS" ++ ++ ++ ++ ++if test "$gdu_cv_have_gdu" = "yes"; then ++ HAVE_GNOME_DOC_UTILS_TRUE= ++ HAVE_GNOME_DOC_UTILS_FALSE='#' ++else ++ HAVE_GNOME_DOC_UTILS_TRUE='#' ++ HAVE_GNOME_DOC_UTILS_FALSE= ++fi ++ ++ ++ ++ ++# Extract the first word of "glib-genmarshal", so it can be a program name with args. ++set dummy glib-genmarshal; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_GLIB_GENMARSHAL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $GLIB_GENMARSHAL in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_GLIB_GENMARSHAL="$GLIB_GENMARSHAL" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_GLIB_GENMARSHAL="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++GLIB_GENMARSHAL=$ac_cv_path_GLIB_GENMARSHAL ++if test -n "$GLIB_GENMARSHAL"; then ++ { echo "$as_me:$LINENO: result: $GLIB_GENMARSHAL" >&5 ++echo "${ECHO_T}$GLIB_GENMARSHAL" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ ++if test "$GCC" = "yes"; then ++ CPPFLAGS="$CPPFLAGS -Wcast-align -Wno-uninitialized" ++ CPPFLAGS="$CPPFLAGS -Wall -Wformat-security" ++fi ++ ++CPPFLAGS="$CPPFLAGS -g" ++CPPFLAGS="$CPPFLAGS -fexceptions" ++ ++#CPPFLAGS="$CPPFLAGS -c -pg" ++#LDFLAGS="$LDFLAGS -pg" ++ ++GETTEXT_PACKAGE=gnome-power-manager ++ ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define GETTEXT_PACKAGE "gnome-power-manager" ++_ACEOF ++ ++ ++ ++ ++for ac_header in locale.h ++do ++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ { echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++fi ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++else ++ # Is the header compilable? ++{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 ++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++$ac_includes_default ++@%:@include <$ac_header> ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_header_compiler=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_header_compiler=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } ++ ++# Is the header present? ++{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 ++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++@%:@include <$ac_header> ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ ac_header_preproc=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_header_preproc=no ++fi ++ ++rm -f conftest.err conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } ++ ++# So? What about this header? ++case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in ++ yes:no: ) ++ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 ++echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 ++echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ++ ac_header_preproc=yes ++ ;; ++ no:yes:* ) ++ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 ++echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 ++echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 ++echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 ++echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 ++echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 ++echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ++ ++ ;; ++esac ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ eval "$as_ac_Header=\$ac_header_preproc" ++fi ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++ ++fi ++if test `eval echo '${'$as_ac_Header'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++@%:@define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++_ACEOF ++ ++fi ++ ++done ++ ++ if test $ac_cv_header_locale_h = yes; then ++ { echo "$as_me:$LINENO: checking for LC_MESSAGES" >&5 ++echo $ECHO_N "checking for LC_MESSAGES... $ECHO_C" >&6; } ++if test "${am_cv_val_LC_MESSAGES+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++int ++main () ++{ ++return LC_MESSAGES ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ am_cv_val_LC_MESSAGES=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ am_cv_val_LC_MESSAGES=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $am_cv_val_LC_MESSAGES" >&5 ++echo "${ECHO_T}$am_cv_val_LC_MESSAGES" >&6; } ++ if test $am_cv_val_LC_MESSAGES = yes; then ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_LC_MESSAGES 1 ++_ACEOF ++ ++ fi ++ fi ++ USE_NLS=yes ++ ++ ++ gt_cv_have_gettext=no ++ ++ CATOBJEXT=NONE ++ XGETTEXT=: ++ INTLLIBS= ++ ++ if test "${ac_cv_header_libintl_h+set}" = set; then ++ { echo "$as_me:$LINENO: checking for libintl.h" >&5 ++echo $ECHO_N "checking for libintl.h... $ECHO_C" >&6; } ++if test "${ac_cv_header_libintl_h+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_header_libintl_h" >&5 ++echo "${ECHO_T}$ac_cv_header_libintl_h" >&6; } ++else ++ # Is the header compilable? ++{ echo "$as_me:$LINENO: checking libintl.h usability" >&5 ++echo $ECHO_N "checking libintl.h usability... $ECHO_C" >&6; } ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++$ac_includes_default ++@%:@include ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_header_compiler=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_header_compiler=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } ++ ++# Is the header present? ++{ echo "$as_me:$LINENO: checking libintl.h presence" >&5 ++echo $ECHO_N "checking libintl.h presence... $ECHO_C" >&6; } ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++@%:@include ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ ac_header_preproc=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_header_preproc=no ++fi ++ ++rm -f conftest.err conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } ++ ++# So? What about this header? ++case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in ++ yes:no: ) ++ { echo "$as_me:$LINENO: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&5 ++echo "$as_me: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the compiler's result" >&5 ++echo "$as_me: WARNING: libintl.h: proceeding with the compiler's result" >&2;} ++ ac_header_preproc=yes ++ ;; ++ no:yes:* ) ++ { echo "$as_me:$LINENO: WARNING: libintl.h: present but cannot be compiled" >&5 ++echo "$as_me: WARNING: libintl.h: present but cannot be compiled" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: check for missing prerequisite headers?" >&5 ++echo "$as_me: WARNING: libintl.h: check for missing prerequisite headers?" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: see the Autoconf documentation" >&5 ++echo "$as_me: WARNING: libintl.h: see the Autoconf documentation" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: section \"Present But Cannot Be Compiled\"" >&5 ++echo "$as_me: WARNING: libintl.h: section \"Present But Cannot Be Compiled\"" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the preprocessor's result" >&5 ++echo "$as_me: WARNING: libintl.h: proceeding with the preprocessor's result" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: in the future, the compiler will take precedence" >&5 ++echo "$as_me: WARNING: libintl.h: in the future, the compiler will take precedence" >&2;} ++ ++ ;; ++esac ++{ echo "$as_me:$LINENO: checking for libintl.h" >&5 ++echo $ECHO_N "checking for libintl.h... $ECHO_C" >&6; } ++if test "${ac_cv_header_libintl_h+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_cv_header_libintl_h=$ac_header_preproc ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_header_libintl_h" >&5 ++echo "${ECHO_T}$ac_cv_header_libintl_h" >&6; } ++ ++fi ++if test $ac_cv_header_libintl_h = yes; then ++ gt_cv_func_dgettext_libintl="no" ++ libintl_extra_libs="" ++ ++ # ++ # First check in libc ++ # ++ { echo "$as_me:$LINENO: checking for ngettext in libc" >&5 ++echo $ECHO_N "checking for ngettext in libc... $ECHO_C" >&6; } ++if test "${gt_cv_func_ngettext_libc+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++#include ++ ++int ++main () ++{ ++return !ngettext ("","", 1) ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ gt_cv_func_ngettext_libc=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ gt_cv_func_ngettext_libc=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ ++fi ++{ echo "$as_me:$LINENO: result: $gt_cv_func_ngettext_libc" >&5 ++echo "${ECHO_T}$gt_cv_func_ngettext_libc" >&6; } ++ ++ if test "$gt_cv_func_ngettext_libc" = "yes" ; then ++ { echo "$as_me:$LINENO: checking for dgettext in libc" >&5 ++echo $ECHO_N "checking for dgettext in libc... $ECHO_C" >&6; } ++if test "${gt_cv_func_dgettext_libc+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++#include ++ ++int ++main () ++{ ++return !dgettext ("","") ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ gt_cv_func_dgettext_libc=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ gt_cv_func_dgettext_libc=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ ++fi ++{ echo "$as_me:$LINENO: result: $gt_cv_func_dgettext_libc" >&5 ++echo "${ECHO_T}$gt_cv_func_dgettext_libc" >&6; } ++ fi ++ ++ if test "$gt_cv_func_ngettext_libc" = "yes" ; then ++ ++for ac_func in bind_textdomain_codeset ++do ++as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define $ac_func to an innocuous variant, in case declares $ac_func. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define $ac_func innocuous_$ac_func ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char $ac_func (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef $ac_func ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char $ac_func (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_$ac_func || defined __stub___$ac_func ++choke me ++#endif ++ ++int ++main () ++{ ++return $ac_func (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ eval "$as_ac_var=yes" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ eval "$as_ac_var=no" ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++if test `eval echo '${'$as_ac_var'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 ++_ACEOF ++ ++fi ++done ++ ++ fi ++ ++ # ++ # If we don't have everything we want, check in libintl ++ # ++ if test "$gt_cv_func_dgettext_libc" != "yes" \ ++ || test "$gt_cv_func_ngettext_libc" != "yes" \ ++ || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then ++ ++ { echo "$as_me:$LINENO: checking for bindtextdomain in -lintl" >&5 ++echo $ECHO_N "checking for bindtextdomain in -lintl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_intl_bindtextdomain+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lintl $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char bindtextdomain (); ++int ++main () ++{ ++return bindtextdomain (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_intl_bindtextdomain=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_intl_bindtextdomain=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_bindtextdomain" >&5 ++echo "${ECHO_T}$ac_cv_lib_intl_bindtextdomain" >&6; } ++if test $ac_cv_lib_intl_bindtextdomain = yes; then ++ { echo "$as_me:$LINENO: checking for ngettext in -lintl" >&5 ++echo $ECHO_N "checking for ngettext in -lintl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_intl_ngettext+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lintl $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char ngettext (); ++int ++main () ++{ ++return ngettext (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_intl_ngettext=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_intl_ngettext=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_ngettext" >&5 ++echo "${ECHO_T}$ac_cv_lib_intl_ngettext" >&6; } ++if test $ac_cv_lib_intl_ngettext = yes; then ++ { echo "$as_me:$LINENO: checking for dgettext in -lintl" >&5 ++echo $ECHO_N "checking for dgettext in -lintl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_intl_dgettext+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lintl $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dgettext (); ++int ++main () ++{ ++return dgettext (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_intl_dgettext=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_intl_dgettext=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_dgettext" >&5 ++echo "${ECHO_T}$ac_cv_lib_intl_dgettext" >&6; } ++if test $ac_cv_lib_intl_dgettext = yes; then ++ gt_cv_func_dgettext_libintl=yes ++fi ++ ++fi ++ ++fi ++ ++ ++ if test "$gt_cv_func_dgettext_libintl" != "yes" ; then ++ { echo "$as_me:$LINENO: checking if -liconv is needed to use gettext" >&5 ++echo $ECHO_N "checking if -liconv is needed to use gettext... $ECHO_C" >&6; } ++ { echo "$as_me:$LINENO: result: " >&5 ++echo "${ECHO_T}" >&6; } ++ { echo "$as_me:$LINENO: checking for ngettext in -lintl" >&5 ++echo $ECHO_N "checking for ngettext in -lintl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_intl_ngettext+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lintl -liconv $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char ngettext (); ++int ++main () ++{ ++return ngettext (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_intl_ngettext=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_intl_ngettext=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_ngettext" >&5 ++echo "${ECHO_T}$ac_cv_lib_intl_ngettext" >&6; } ++if test $ac_cv_lib_intl_ngettext = yes; then ++ { echo "$as_me:$LINENO: checking for dcgettext in -lintl" >&5 ++echo $ECHO_N "checking for dcgettext in -lintl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_intl_dcgettext+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lintl -liconv $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dcgettext (); ++int ++main () ++{ ++return dcgettext (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_intl_dcgettext=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_intl_dcgettext=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_dcgettext" >&5 ++echo "${ECHO_T}$ac_cv_lib_intl_dcgettext" >&6; } ++if test $ac_cv_lib_intl_dcgettext = yes; then ++ gt_cv_func_dgettext_libintl=yes ++ libintl_extra_libs=-liconv ++else ++ : ++fi ++ ++else ++ : ++fi ++ ++ fi ++ ++ # ++ # If we found libintl, then check in it for bind_textdomain_codeset(); ++ # we'll prefer libc if neither have bind_textdomain_codeset(), ++ # and both have dgettext and ngettext ++ # ++ if test "$gt_cv_func_dgettext_libintl" = "yes" ; then ++ glib_save_LIBS="$LIBS" ++ LIBS="$LIBS -lintl $libintl_extra_libs" ++ unset ac_cv_func_bind_textdomain_codeset ++ ++for ac_func in bind_textdomain_codeset ++do ++as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define $ac_func to an innocuous variant, in case declares $ac_func. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define $ac_func innocuous_$ac_func ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char $ac_func (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef $ac_func ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char $ac_func (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_$ac_func || defined __stub___$ac_func ++choke me ++#endif ++ ++int ++main () ++{ ++return $ac_func (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ eval "$as_ac_var=yes" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ eval "$as_ac_var=no" ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++if test `eval echo '${'$as_ac_var'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 ++_ACEOF ++ ++fi ++done ++ ++ LIBS="$glib_save_LIBS" ++ ++ if test "$ac_cv_func_bind_textdomain_codeset" = "yes" ; then ++ gt_cv_func_dgettext_libc=no ++ else ++ if test "$gt_cv_func_dgettext_libc" = "yes" \ ++ && test "$gt_cv_func_ngettext_libc" = "yes"; then ++ gt_cv_func_dgettext_libintl=no ++ fi ++ fi ++ fi ++ fi ++ ++ if test "$gt_cv_func_dgettext_libc" = "yes" \ ++ || test "$gt_cv_func_dgettext_libintl" = "yes"; then ++ gt_cv_have_gettext=yes ++ fi ++ ++ if test "$gt_cv_func_dgettext_libintl" = "yes"; then ++ INTLLIBS="-lintl $libintl_extra_libs" ++ fi ++ ++ if test "$gt_cv_have_gettext" = "yes"; then ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_GETTEXT 1 ++_ACEOF ++ ++ # Extract the first word of "msgfmt", so it can be a program name with args. ++set dummy msgfmt; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_MSGFMT+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case "$MSGFMT" in ++ /*) ++ ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. ++ ;; ++ *) ++ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" ++ for ac_dir in $PATH; do ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$ac_word; then ++ if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then ++ ac_cv_path_MSGFMT="$ac_dir/$ac_word" ++ break ++ fi ++ fi ++ done ++ IFS="$ac_save_ifs" ++ test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no" ++ ;; ++esac ++fi ++MSGFMT="$ac_cv_path_MSGFMT" ++if test "$MSGFMT" != "no"; then ++ { echo "$as_me:$LINENO: result: $MSGFMT" >&5 ++echo "${ECHO_T}$MSGFMT" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ if test "$MSGFMT" != "no"; then ++ glib_save_LIBS="$LIBS" ++ LIBS="$LIBS $INTLLIBS" ++ ++for ac_func in dcgettext ++do ++as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define $ac_func to an innocuous variant, in case declares $ac_func. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define $ac_func innocuous_$ac_func ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char $ac_func (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef $ac_func ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char $ac_func (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_$ac_func || defined __stub___$ac_func ++choke me ++#endif ++ ++int ++main () ++{ ++return $ac_func (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ eval "$as_ac_var=yes" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ eval "$as_ac_var=no" ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++if test `eval echo '${'$as_ac_var'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 ++_ACEOF ++ ++fi ++done ++ ++ MSGFMT_OPTS= ++ { echo "$as_me:$LINENO: checking if msgfmt accepts -c" >&5 ++echo $ECHO_N "checking if msgfmt accepts -c... $ECHO_C" >&6; } ++ cat >conftest.foo <<_ACEOF ++ ++msgid "" ++msgstr "" ++"Content-Type: text/plain; charset=UTF-8\n" ++"Project-Id-Version: test 1.0\n" ++"PO-Revision-Date: 2007-02-15 12:01+0100\n" ++"Last-Translator: test \n" ++"Language-Team: C \n" ++"MIME-Version: 1.0\n" ++"Content-Transfer-Encoding: 8bit\n" ++ ++_ACEOF ++if { (echo "$as_me:$LINENO: \$MSGFMT -c -o /dev/null conftest.foo") >&5 ++ ($MSGFMT -c -o /dev/null conftest.foo) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ MSGFMT_OPTS=-c; { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++echo "$as_me: failed input was:" >&5 ++sed 's/^/| /' conftest.foo >&5 ++fi ++ ++ # Extract the first word of "gmsgfmt", so it can be a program name with args. ++set dummy gmsgfmt; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_GMSGFMT+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $GMSGFMT in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" ++ ;; ++esac ++fi ++GMSGFMT=$ac_cv_path_GMSGFMT ++if test -n "$GMSGFMT"; then ++ { echo "$as_me:$LINENO: result: $GMSGFMT" >&5 ++echo "${ECHO_T}$GMSGFMT" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ # Extract the first word of "xgettext", so it can be a program name with args. ++set dummy xgettext; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_XGETTEXT+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case "$XGETTEXT" in ++ /*) ++ ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. ++ ;; ++ *) ++ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" ++ for ac_dir in $PATH; do ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$ac_word; then ++ if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then ++ ac_cv_path_XGETTEXT="$ac_dir/$ac_word" ++ break ++ fi ++ fi ++ done ++ IFS="$ac_save_ifs" ++ test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" ++ ;; ++esac ++fi ++XGETTEXT="$ac_cv_path_XGETTEXT" ++if test "$XGETTEXT" != ":"; then ++ { echo "$as_me:$LINENO: result: $XGETTEXT" >&5 ++echo "${ECHO_T}$XGETTEXT" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++extern int _nl_msg_cat_cntr; ++ return _nl_msg_cat_cntr ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ CATOBJEXT=.gmo ++ DATADIRNAME=share ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ case $host in ++ *-*-solaris*) ++ { echo "$as_me:$LINENO: checking for bind_textdomain_codeset" >&5 ++echo $ECHO_N "checking for bind_textdomain_codeset... $ECHO_C" >&6; } ++if test "${ac_cv_func_bind_textdomain_codeset+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define bind_textdomain_codeset to an innocuous variant, in case declares bind_textdomain_codeset. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define bind_textdomain_codeset innocuous_bind_textdomain_codeset ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char bind_textdomain_codeset (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef bind_textdomain_codeset ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char bind_textdomain_codeset (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_bind_textdomain_codeset || defined __stub___bind_textdomain_codeset ++choke me ++#endif ++ ++int ++main () ++{ ++return bind_textdomain_codeset (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_bind_textdomain_codeset=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_func_bind_textdomain_codeset=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_bind_textdomain_codeset" >&5 ++echo "${ECHO_T}$ac_cv_func_bind_textdomain_codeset" >&6; } ++if test $ac_cv_func_bind_textdomain_codeset = yes; then ++ CATOBJEXT=.gmo ++ DATADIRNAME=share ++else ++ CATOBJEXT=.mo ++ DATADIRNAME=lib ++fi ++ ++ ;; ++ *) ++ CATOBJEXT=.mo ++ DATADIRNAME=lib ++ ;; ++ esac ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ LIBS="$glib_save_LIBS" ++ INSTOBJEXT=.mo ++ else ++ gt_cv_have_gettext=no ++ fi ++ fi ++ ++fi ++ ++ ++ ++ if test "$gt_cv_have_gettext" = "yes" ; then ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define ENABLE_NLS 1 ++_ACEOF ++ ++ fi ++ ++ if test "$XGETTEXT" != ":"; then ++ if $XGETTEXT --omit-header /dev/null 2> /dev/null; then ++ : ; ++ else ++ { echo "$as_me:$LINENO: result: found xgettext program is not GNU xgettext; ignore it" >&5 ++echo "${ECHO_T}found xgettext program is not GNU xgettext; ignore it" >&6; } ++ XGETTEXT=":" ++ fi ++ fi ++ ++ # We need to process the po/ directory. ++ POSUB=po ++ ++ ac_config_commands="$ac_config_commands default-1" ++ ++ ++ for lang in $ALL_LINGUAS; do ++ GMOFILES="$GMOFILES $lang.gmo" ++ POFILES="$POFILES $lang.po" ++ done ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ if test "$gt_cv_have_gettext" = "yes"; then ++ if test "x$ALL_LINGUAS" = "x"; then ++ LINGUAS= ++ else ++ { echo "$as_me:$LINENO: checking for catalogs to be installed" >&5 ++echo $ECHO_N "checking for catalogs to be installed... $ECHO_C" >&6; } ++ NEW_LINGUAS= ++ for presentlang in $ALL_LINGUAS; do ++ useit=no ++ if test "%UNSET%" != "${LINGUAS-%UNSET%}"; then ++ desiredlanguages="$LINGUAS" ++ else ++ desiredlanguages="$ALL_LINGUAS" ++ fi ++ for desiredlang in $desiredlanguages; do ++ # Use the presentlang catalog if desiredlang is ++ # a. equal to presentlang, or ++ # b. a variant of presentlang (because in this case, ++ # presentlang can be used as a fallback for messages ++ # which are not translated in the desiredlang catalog). ++ case "$desiredlang" in ++ "$presentlang"*) useit=yes;; ++ esac ++ done ++ if test $useit = yes; then ++ NEW_LINGUAS="$NEW_LINGUAS $presentlang" ++ fi ++ done ++ LINGUAS=$NEW_LINGUAS ++ { echo "$as_me:$LINENO: result: $LINGUAS" >&5 ++echo "${ECHO_T}$LINGUAS" >&6; } ++ fi ++ ++ if test -n "$LINGUAS"; then ++ for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done ++ fi ++ fi ++ ++ MKINSTALLDIRS= ++ if test -n "$ac_aux_dir"; then ++ MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" ++ fi ++ if test -z "$MKINSTALLDIRS"; then ++ MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" ++ fi ++ ++ ++ test -d po || mkdir po ++ if test "x$srcdir" != "x."; then ++ if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then ++ posrcprefix="$srcdir/" ++ else ++ posrcprefix="../$srcdir/" ++ fi ++ else ++ posrcprefix="../" ++ fi ++ rm -f po/POTFILES ++ sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ ++ < $srcdir/po/POTFILES.in > po/POTFILES ++ ++ ++GLIB_REQUIRED=2.13.0 ++GTK_REQUIRED=2.11.0 ++GDK_REQUIRED=2.11.0 ++GNOME_KEYRING_REQUIRED=0.6.0 ++LIBGNOME_REQUIRED=2.14.0 ++LIBGNOMEUI_REQUIRED=2.14.0 ++HAL_REQUIRED=0.5.8 ++DBUS_REQUIRED=0.70 ++LIBGLADE_REQUIRED=2.5.0 ++LIBNOTIFY_REQUIRED=0.4.3 ++LIBWNCK_REQUIRED=2.10.0 ++CAIRO_REQUIRED=1.0.0 ++UNIQUE_REQUIRED=0.9.4 ++LIBPANEL_REQUIRED=2.0.0 ++GSTREAMER_REQUIRED=0.10 ++XRANDR_REQUIRED=1.2.0 ++POLKIT_GNOME_REQUIRED=0.8 ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for GLIB" >&5 ++echo $ECHO_N "checking for GLIB... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GLIB_CFLAGS"; then ++ pkg_cv_GLIB_CFLAGS="$GLIB_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED gobject-2.0\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED gobject-2.0") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GLIB_CFLAGS=`$PKG_CONFIG --cflags "glib-2.0 >= $GLIB_REQUIRED gobject-2.0" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GLIB_LIBS"; then ++ pkg_cv_GLIB_LIBS="$GLIB_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED gobject-2.0\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED gobject-2.0") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GLIB_LIBS=`$PKG_CONFIG --libs "glib-2.0 >= $GLIB_REQUIRED gobject-2.0" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ GLIB_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "glib-2.0 >= $GLIB_REQUIRED gobject-2.0"` ++ else ++ GLIB_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "glib-2.0 >= $GLIB_REQUIRED gobject-2.0"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$GLIB_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements (glib-2.0 >= $GLIB_REQUIRED gobject-2.0) were not met: ++ ++$GLIB_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables GLIB_CFLAGS ++and GLIB_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (glib-2.0 >= $GLIB_REQUIRED gobject-2.0) were not met: ++ ++$GLIB_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables GLIB_CFLAGS ++and GLIB_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables GLIB_CFLAGS ++and GLIB_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables GLIB_CFLAGS ++and GLIB_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ GLIB_CFLAGS=$pkg_cv_GLIB_CFLAGS ++ GLIB_LIBS=$pkg_cv_GLIB_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for HAL" >&5 ++echo $ECHO_N "checking for HAL... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$HAL_CFLAGS"; then ++ pkg_cv_HAL_CFLAGS="$HAL_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"hal >= \$HAL_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "hal >= $HAL_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_HAL_CFLAGS=`$PKG_CONFIG --cflags "hal >= $HAL_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$HAL_LIBS"; then ++ pkg_cv_HAL_LIBS="$HAL_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"hal >= \$HAL_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "hal >= $HAL_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_HAL_LIBS=`$PKG_CONFIG --libs "hal >= $HAL_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ HAL_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "hal >= $HAL_REQUIRED"` ++ else ++ HAL_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "hal >= $HAL_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$HAL_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements (hal >= $HAL_REQUIRED) were not met: ++ ++$HAL_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables HAL_CFLAGS ++and HAL_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (hal >= $HAL_REQUIRED) were not met: ++ ++$HAL_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables HAL_CFLAGS ++and HAL_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables HAL_CFLAGS ++and HAL_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables HAL_CFLAGS ++and HAL_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ HAL_CFLAGS=$pkg_cv_HAL_CFLAGS ++ HAL_LIBS=$pkg_cv_HAL_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for GSTREAMER" >&5 ++echo $ECHO_N "checking for GSTREAMER... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GSTREAMER_CFLAGS"; then ++ pkg_cv_GSTREAMER_CFLAGS="$GSTREAMER_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gstreamer-0.10 >= \$GSTREAMER_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "gstreamer-0.10 >= $GSTREAMER_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GSTREAMER_CFLAGS=`$PKG_CONFIG --cflags "gstreamer-0.10 >= $GSTREAMER_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GSTREAMER_LIBS"; then ++ pkg_cv_GSTREAMER_LIBS="$GSTREAMER_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gstreamer-0.10 >= \$GSTREAMER_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "gstreamer-0.10 >= $GSTREAMER_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GSTREAMER_LIBS=`$PKG_CONFIG --libs "gstreamer-0.10 >= $GSTREAMER_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ GSTREAMER_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "gstreamer-0.10 >= $GSTREAMER_REQUIRED"` ++ else ++ GSTREAMER_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "gstreamer-0.10 >= $GSTREAMER_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$GSTREAMER_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements (gstreamer-0.10 >= $GSTREAMER_REQUIRED) were not met: ++ ++$GSTREAMER_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables GSTREAMER_CFLAGS ++and GSTREAMER_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (gstreamer-0.10 >= $GSTREAMER_REQUIRED) were not met: ++ ++$GSTREAMER_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables GSTREAMER_CFLAGS ++and GSTREAMER_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables GSTREAMER_CFLAGS ++and GSTREAMER_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables GSTREAMER_CFLAGS ++and GSTREAMER_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ GSTREAMER_CFLAGS=$pkg_cv_GSTREAMER_CFLAGS ++ GSTREAMER_LIBS=$pkg_cv_GSTREAMER_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for DBUS" >&5 ++echo $ECHO_N "checking for DBUS... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$DBUS_CFLAGS"; then ++ pkg_cv_DBUS_CFLAGS="$DBUS_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ dbus-glib-1 >= \$DBUS_REQUIRED ++ dbus-1 >= \$DBUS_REQUIRED ++ gthread-2.0\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_DBUS_CFLAGS=`$PKG_CONFIG --cflags " ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$DBUS_LIBS"; then ++ pkg_cv_DBUS_LIBS="$DBUS_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ dbus-glib-1 >= \$DBUS_REQUIRED ++ dbus-1 >= \$DBUS_REQUIRED ++ gthread-2.0\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_DBUS_LIBS=`$PKG_CONFIG --libs " ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ DBUS_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors " ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0"` ++ else ++ DBUS_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors " ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$DBUS_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements ( ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0) were not met: ++ ++$DBUS_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables DBUS_CFLAGS ++and DBUS_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements ( ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0) were not met: ++ ++$DBUS_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables DBUS_CFLAGS ++and DBUS_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables DBUS_CFLAGS ++and DBUS_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables DBUS_CFLAGS ++and DBUS_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ DBUS_CFLAGS=$pkg_cv_DBUS_CFLAGS ++ DBUS_LIBS=$pkg_cv_DBUS_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for GNOME" >&5 ++echo $ECHO_N "checking for GNOME... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GNOME_CFLAGS"; then ++ pkg_cv_GNOME_CFLAGS="$GNOME_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ libgnomeui-2.0 >= \$LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= \$LIBGLADE_REQUIRED ++ libwnck-1.0 >= \$LIBWNCK_REQUIRED ++ gtk+-2.0 >= \$GTK_REQUIRED ++ gnome-keyring-1 >= \$GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= \$LIBPANEL_REQUIRED ++ cairo >= \$CAIRO_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GNOME_CFLAGS=`$PKG_CONFIG --cflags " ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GNOME_LIBS"; then ++ pkg_cv_GNOME_LIBS="$GNOME_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ libgnomeui-2.0 >= \$LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= \$LIBGLADE_REQUIRED ++ libwnck-1.0 >= \$LIBWNCK_REQUIRED ++ gtk+-2.0 >= \$GTK_REQUIRED ++ gnome-keyring-1 >= \$GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= \$LIBPANEL_REQUIRED ++ cairo >= \$CAIRO_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GNOME_LIBS=`$PKG_CONFIG --libs " ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ GNOME_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors " ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED"` ++ else ++ GNOME_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors " ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$GNOME_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements ( ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED) were not met: ++ ++$GNOME_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables GNOME_CFLAGS ++and GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements ( ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED) were not met: ++ ++$GNOME_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables GNOME_CFLAGS ++and GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables GNOME_CFLAGS ++and GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables GNOME_CFLAGS ++and GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ GNOME_CFLAGS=$pkg_cv_GNOME_CFLAGS ++ GNOME_LIBS=$pkg_cv_GNOME_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for GDK" >&5 ++echo $ECHO_N "checking for GDK... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GDK_CFLAGS"; then ++ pkg_cv_GDK_CFLAGS="$GDK_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ gdk-2.0 >= \$GDK_REQUIRED ++ gdk-x11-2.0 >= \$GDK_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GDK_CFLAGS=`$PKG_CONFIG --cflags " ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GDK_LIBS"; then ++ pkg_cv_GDK_LIBS="$GDK_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ gdk-2.0 >= \$GDK_REQUIRED ++ gdk-x11-2.0 >= \$GDK_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GDK_LIBS=`$PKG_CONFIG --libs " ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ GDK_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors " ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED"` ++ else ++ GDK_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors " ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$GDK_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements ( ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED) were not met: ++ ++$GDK_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables GDK_CFLAGS ++and GDK_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements ( ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED) were not met: ++ ++$GDK_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables GDK_CFLAGS ++and GDK_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables GDK_CFLAGS ++and GDK_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables GDK_CFLAGS ++and GDK_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ GDK_CFLAGS=$pkg_cv_GDK_CFLAGS ++ GDK_LIBS=$pkg_cv_GDK_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for XRANDR" >&5 ++echo $ECHO_N "checking for XRANDR... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$XRANDR_CFLAGS"; then ++ pkg_cv_XRANDR_CFLAGS="$XRANDR_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ xrandr >= \$XRANDR_REQUIRED ++ xrender x11\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_XRANDR_CFLAGS=`$PKG_CONFIG --cflags " ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$XRANDR_LIBS"; then ++ pkg_cv_XRANDR_LIBS="$XRANDR_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ xrandr >= \$XRANDR_REQUIRED ++ xrender x11\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_XRANDR_LIBS=`$PKG_CONFIG --libs " ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ XRANDR_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors " ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11"` ++ else ++ XRANDR_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors " ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$XRANDR_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements ( ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11) were not met: ++ ++$XRANDR_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables XRANDR_CFLAGS ++and XRANDR_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements ( ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11) were not met: ++ ++$XRANDR_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables XRANDR_CFLAGS ++and XRANDR_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables XRANDR_CFLAGS ++and XRANDR_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables XRANDR_CFLAGS ++and XRANDR_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ XRANDR_CFLAGS=$pkg_cv_XRANDR_CFLAGS ++ XRANDR_LIBS=$pkg_cv_XRANDR_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ ++# Extract the first word of "gconftool-2", so it can be a program name with args. ++set dummy gconftool-2; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_GCONFTOOL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $GCONFTOOL in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_GCONFTOOL="$GCONFTOOL" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_GCONFTOOL="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++GCONFTOOL=$ac_cv_path_GCONFTOOL ++if test -n "$GCONFTOOL"; then ++ { echo "$as_me:$LINENO: result: $GCONFTOOL" >&5 ++echo "${ECHO_T}$GCONFTOOL" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ ++ if test "x$GCONF_SCHEMA_INSTALL_SOURCE" = "x"; then ++ GCONF_SCHEMA_CONFIG_SOURCE=`gconftool-2 --get-default-source` ++ else ++ GCONF_SCHEMA_CONFIG_SOURCE=$GCONF_SCHEMA_INSTALL_SOURCE ++ fi ++ ++ ++# Check whether --with-gconf-source was given. ++if test "${with_gconf_source+set}" = set; then ++ withval=$with_gconf_source; GCONF_SCHEMA_CONFIG_SOURCE="$withval" ++fi ++ ++ ++ ++ { echo "$as_me:$LINENO: result: Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation" >&5 ++echo "${ECHO_T}Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation" >&6; } ++ ++ if test "x$GCONF_SCHEMA_FILE_DIR" = "x"; then ++ GCONF_SCHEMA_FILE_DIR='$(sysconfdir)/gconf/schemas' ++ fi ++ ++ ++# Check whether --with-gconf-schema-file-dir was given. ++if test "${with_gconf_schema_file_dir+set}" = set; then ++ withval=$with_gconf_schema_file_dir; GCONF_SCHEMA_FILE_DIR="$withval" ++fi ++ ++ ++ ++ { echo "$as_me:$LINENO: result: Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files" >&5 ++echo "${ECHO_T}Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files" >&6; } ++ ++ # Check whether --enable-schemas-install was given. ++if test "${enable_schemas_install+set}" = set; then ++ enableval=$enable_schemas_install; case ${enableval} in ++ yes|no) ;; ++ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-schemas-install" >&5 ++echo "$as_me: error: bad value ${enableval} for --enable-schemas-install" >&2;} ++ { (exit 1); exit 1; }; } ;; ++ esac ++fi ++ ++ ++ ++if test "$enable_schemas_install" != no; then ++ GCONF_SCHEMAS_INSTALL_TRUE= ++ GCONF_SCHEMAS_INSTALL_FALSE='#' ++else ++ GCONF_SCHEMAS_INSTALL_TRUE='#' ++ GCONF_SCHEMAS_INSTALL_FALSE= ++fi ++ ++ ++ ++{ echo "$as_me:$LINENO: checking for X" >&5 ++echo $ECHO_N "checking for X... $ECHO_C" >&6; } ++ ++ ++# Check whether --with-x was given. ++if test "${with_x+set}" = set; then ++ withval=$with_x; ++fi ++ ++# $have_x is `yes', `no', `disabled', or empty when we do not yet know. ++if test "x$with_x" = xno; then ++ # The user explicitly disabled X. ++ have_x=disabled ++else ++ case $x_includes,$x_libraries in #( ++ *\'*) { { echo "$as_me:$LINENO: error: Cannot use X directory names containing '" >&5 ++echo "$as_me: error: Cannot use X directory names containing '" >&2;} ++ { (exit 1); exit 1; }; };; #( ++ *,NONE | NONE,*) if test "${ac_cv_have_x+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ # One or both of the vars are not set, and there is no cached value. ++ac_x_includes=no ac_x_libraries=no ++rm -f -r conftest.dir ++if mkdir conftest.dir; then ++ cd conftest.dir ++ cat >Imakefile <<'_ACEOF' ++incroot: ++ @echo incroot='${INCROOT}' ++usrlibdir: ++ @echo usrlibdir='${USRLIBDIR}' ++libdir: ++ @echo libdir='${LIBDIR}' ++_ACEOF ++ if (export CC; ${XMKMF-xmkmf}) >/dev/null 2>/dev/null && test -f Makefile; then ++ # GNU make sometimes prints "make[1]: Entering...", which would confuse us. ++ for ac_var in incroot usrlibdir libdir; do ++ eval "ac_im_$ac_var=\`\${MAKE-make} $ac_var 2>/dev/null | sed -n 's/^$ac_var=//p'\`" ++ done ++ # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. ++ for ac_extension in a so sl; do ++ if test ! -f "$ac_im_usrlibdir/libX11.$ac_extension" && ++ test -f "$ac_im_libdir/libX11.$ac_extension"; then ++ ac_im_usrlibdir=$ac_im_libdir; break ++ fi ++ done ++ # Screen out bogus values from the imake configuration. They are ++ # bogus both because they are the default anyway, and because ++ # using them would break gcc on systems where it needs fixed includes. ++ case $ac_im_incroot in ++ /usr/include) ac_x_includes= ;; ++ *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;; ++ esac ++ case $ac_im_usrlibdir in ++ /usr/lib | /lib) ;; ++ *) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;; ++ esac ++ fi ++ cd .. ++ rm -f -r conftest.dir ++fi ++ ++# Standard set of common directories for X headers. ++# Check X11 before X11Rn because it is often a symlink to the current release. ++ac_x_header_dirs=' ++/usr/X11/include ++/usr/X11R6/include ++/usr/X11R5/include ++/usr/X11R4/include ++ ++/usr/include/X11 ++/usr/include/X11R6 ++/usr/include/X11R5 ++/usr/include/X11R4 ++ ++/usr/local/X11/include ++/usr/local/X11R6/include ++/usr/local/X11R5/include ++/usr/local/X11R4/include ++ ++/usr/local/include/X11 ++/usr/local/include/X11R6 ++/usr/local/include/X11R5 ++/usr/local/include/X11R4 ++ ++/usr/X386/include ++/usr/x386/include ++/usr/XFree86/include/X11 ++ ++/usr/include ++/usr/local/include ++/usr/unsupported/include ++/usr/athena/include ++/usr/local/x11r5/include ++/usr/lpp/Xamples/include ++ ++/usr/openwin/include ++/usr/openwin/share/include' ++ ++if test "$ac_x_includes" = no; then ++ # Guess where to find include files, by looking for Xlib.h. ++ # First, try using that file with no special directory specified. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++@%:@include ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ # We can compile using X headers with no special include directory. ++ac_x_includes= ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ for ac_dir in $ac_x_header_dirs; do ++ if test -r "$ac_dir/X11/Xlib.h"; then ++ ac_x_includes=$ac_dir ++ break ++ fi ++done ++fi ++ ++rm -f conftest.err conftest.$ac_ext ++fi # $ac_x_includes = no ++ ++if test "$ac_x_libraries" = no; then ++ # Check for the libraries. ++ # See if we find them without any special options. ++ # Don't add to $LIBS permanently. ++ ac_save_LIBS=$LIBS ++ LIBS="-lX11 $LIBS" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++@%:@include ++int ++main () ++{ ++XrmInitialize () ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ LIBS=$ac_save_LIBS ++# We can link X programs with no special library path. ++ac_x_libraries= ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ LIBS=$ac_save_LIBS ++for ac_dir in `echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g` ++do ++ # Don't even attempt the hair of trying to link an X program! ++ for ac_extension in a so sl; do ++ if test -r "$ac_dir/libX11.$ac_extension"; then ++ ac_x_libraries=$ac_dir ++ break 2 ++ fi ++ done ++done ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi # $ac_x_libraries = no ++ ++case $ac_x_includes,$ac_x_libraries in #( ++ no,* | *,no | *\'*) ++ # Didn't find X, or a directory has "'" in its name. ++ ac_cv_have_x="have_x=no";; #( ++ *) ++ # Record where we found X for the cache. ++ ac_cv_have_x="have_x=yes\ ++ ac_x_includes='$ac_x_includes'\ ++ ac_x_libraries='$ac_x_libraries'" ++esac ++fi ++;; #( ++ *) have_x=yes;; ++ esac ++ eval "$ac_cv_have_x" ++fi # $with_x != no ++ ++if test "$have_x" != yes; then ++ { echo "$as_me:$LINENO: result: $have_x" >&5 ++echo "${ECHO_T}$have_x" >&6; } ++ no_x=yes ++else ++ # If each of the values was on the command line, it overrides each guess. ++ test "x$x_includes" = xNONE && x_includes=$ac_x_includes ++ test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries ++ # Update the cache value to reflect the command line values. ++ ac_cv_have_x="have_x=yes\ ++ ac_x_includes='$x_includes'\ ++ ac_x_libraries='$x_libraries'" ++ { echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5 ++echo "${ECHO_T}libraries $x_libraries, headers $x_includes" >&6; } ++fi ++ ++if test "$no_x" = yes; then ++ # Not all programs may use this symbol, but it does not hurt to define it. ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define X_DISPLAY_MISSING 1 ++_ACEOF ++ ++ X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS= ++else ++ if test -n "$x_includes"; then ++ X_CFLAGS="$X_CFLAGS -I$x_includes" ++ fi ++ ++ # It would also be nice to do this for all -L options, not just this one. ++ if test -n "$x_libraries"; then ++ X_LIBS="$X_LIBS -L$x_libraries" ++ # For Solaris; some versions of Sun CC require a space after -R and ++ # others require no space. Words are not sufficient . . . . ++ { echo "$as_me:$LINENO: checking whether -R must be followed by a space" >&5 ++echo $ECHO_N "checking whether -R must be followed by a space... $ECHO_C" >&6; } ++ ac_xsave_LIBS=$LIBS; LIBS="$LIBS -R$x_libraries" ++ ac_xsave_c_werror_flag=$ac_c_werror_flag ++ ac_c_werror_flag=yes ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ X_LIBS="$X_LIBS -R$x_libraries" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ LIBS="$ac_xsave_LIBS -R $x_libraries" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ X_LIBS="$X_LIBS -R $x_libraries" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ { echo "$as_me:$LINENO: result: neither works" >&5 ++echo "${ECHO_T}neither works" >&6; } ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ ac_c_werror_flag=$ac_xsave_c_werror_flag ++ LIBS=$ac_xsave_LIBS ++ fi ++ ++ # Check for system-dependent libraries X programs must link with. ++ # Do this before checking for the system-independent R6 libraries ++ # (-lICE), since we may need -lsocket or whatever for X linking. ++ ++ if test "$ISC" = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet" ++ else ++ # Martyn Johnson says this is needed for Ultrix, if the X ++ # libraries were built with DECnet support. And Karl Berry says ++ # the Alpha needs dnet_stub (dnet does not exist). ++ ac_xsave_LIBS="$LIBS"; LIBS="$LIBS $X_LIBS -lX11" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char XOpenDisplay (); ++int ++main () ++{ ++return XOpenDisplay (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ : ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ { echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet" >&5 ++echo $ECHO_N "checking for dnet_ntoa in -ldnet... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dnet_dnet_ntoa+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldnet $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dnet_ntoa (); ++int ++main () ++{ ++return dnet_ntoa (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dnet_dnet_ntoa=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_dnet_dnet_ntoa=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_dnet_ntoa" >&5 ++echo "${ECHO_T}$ac_cv_lib_dnet_dnet_ntoa" >&6; } ++if test $ac_cv_lib_dnet_dnet_ntoa = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet" ++fi ++ ++ if test $ac_cv_lib_dnet_dnet_ntoa = no; then ++ { echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet_stub" >&5 ++echo $ECHO_N "checking for dnet_ntoa in -ldnet_stub... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dnet_stub_dnet_ntoa+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldnet_stub $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dnet_ntoa (); ++int ++main () ++{ ++return dnet_ntoa (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dnet_stub_dnet_ntoa=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_dnet_stub_dnet_ntoa=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5 ++echo "${ECHO_T}$ac_cv_lib_dnet_stub_dnet_ntoa" >&6; } ++if test $ac_cv_lib_dnet_stub_dnet_ntoa = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub" ++fi ++ ++ fi ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ LIBS="$ac_xsave_LIBS" ++ ++ # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT, ++ # to get the SysV transport functions. ++ # Chad R. Larson says the Pyramis MIS-ES running DC/OSx (SVR4) ++ # needs -lnsl. ++ # The nsl library prevents programs from opening the X display ++ # on Irix 5.2, according to T.E. Dickey. ++ # The functions gethostbyname, getservbyname, and inet_addr are ++ # in -lbsd on LynxOS 3.0.1/i386, according to Lars Hecking. ++ { echo "$as_me:$LINENO: checking for gethostbyname" >&5 ++echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6; } ++if test "${ac_cv_func_gethostbyname+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define gethostbyname to an innocuous variant, in case declares gethostbyname. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define gethostbyname innocuous_gethostbyname ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char gethostbyname (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef gethostbyname ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char gethostbyname (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_gethostbyname || defined __stub___gethostbyname ++choke me ++#endif ++ ++int ++main () ++{ ++return gethostbyname (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_gethostbyname=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_func_gethostbyname=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5 ++echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6; } ++ ++ if test $ac_cv_func_gethostbyname = no; then ++ { echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 ++echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lnsl $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char gethostbyname (); ++int ++main () ++{ ++return gethostbyname (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_nsl_gethostbyname=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_nsl_gethostbyname=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5 ++echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6; } ++if test $ac_cv_lib_nsl_gethostbyname = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl" ++fi ++ ++ if test $ac_cv_lib_nsl_gethostbyname = no; then ++ { echo "$as_me:$LINENO: checking for gethostbyname in -lbsd" >&5 ++echo $ECHO_N "checking for gethostbyname in -lbsd... $ECHO_C" >&6; } ++if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lbsd $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char gethostbyname (); ++int ++main () ++{ ++return gethostbyname (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_bsd_gethostbyname=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_bsd_gethostbyname=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_gethostbyname" >&5 ++echo "${ECHO_T}$ac_cv_lib_bsd_gethostbyname" >&6; } ++if test $ac_cv_lib_bsd_gethostbyname = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -lbsd" ++fi ++ ++ fi ++ fi ++ ++ # lieder@skyler.mavd.honeywell.com says without -lsocket, ++ # socket/setsockopt and other routines are undefined under SCO ODT ++ # 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary ++ # on later versions), says Simon Leinen: it contains gethostby* ++ # variants that don't use the name server (or something). -lsocket ++ # must be given before -lnsl if both are needed. We assume that ++ # if connect needs -lnsl, so does gethostbyname. ++ { echo "$as_me:$LINENO: checking for connect" >&5 ++echo $ECHO_N "checking for connect... $ECHO_C" >&6; } ++if test "${ac_cv_func_connect+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define connect to an innocuous variant, in case declares connect. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define connect innocuous_connect ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char connect (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef connect ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char connect (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_connect || defined __stub___connect ++choke me ++#endif ++ ++int ++main () ++{ ++return connect (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_connect=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_func_connect=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5 ++echo "${ECHO_T}$ac_cv_func_connect" >&6; } ++ ++ if test $ac_cv_func_connect = no; then ++ { echo "$as_me:$LINENO: checking for connect in -lsocket" >&5 ++echo $ECHO_N "checking for connect in -lsocket... $ECHO_C" >&6; } ++if test "${ac_cv_lib_socket_connect+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lsocket $X_EXTRA_LIBS $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char connect (); ++int ++main () ++{ ++return connect (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_socket_connect=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_socket_connect=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_socket_connect" >&5 ++echo "${ECHO_T}$ac_cv_lib_socket_connect" >&6; } ++if test $ac_cv_lib_socket_connect = yes; then ++ X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS" ++fi ++ ++ fi ++ ++ # Guillermo Gomez says -lposix is necessary on A/UX. ++ { echo "$as_me:$LINENO: checking for remove" >&5 ++echo $ECHO_N "checking for remove... $ECHO_C" >&6; } ++if test "${ac_cv_func_remove+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define remove to an innocuous variant, in case declares remove. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define remove innocuous_remove ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char remove (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef remove ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char remove (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_remove || defined __stub___remove ++choke me ++#endif ++ ++int ++main () ++{ ++return remove (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_remove=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_func_remove=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_remove" >&5 ++echo "${ECHO_T}$ac_cv_func_remove" >&6; } ++ ++ if test $ac_cv_func_remove = no; then ++ { echo "$as_me:$LINENO: checking for remove in -lposix" >&5 ++echo $ECHO_N "checking for remove in -lposix... $ECHO_C" >&6; } ++if test "${ac_cv_lib_posix_remove+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lposix $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char remove (); ++int ++main () ++{ ++return remove (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_posix_remove=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_posix_remove=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_posix_remove" >&5 ++echo "${ECHO_T}$ac_cv_lib_posix_remove" >&6; } ++if test $ac_cv_lib_posix_remove = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix" ++fi ++ ++ fi ++ ++ # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. ++ { echo "$as_me:$LINENO: checking for shmat" >&5 ++echo $ECHO_N "checking for shmat... $ECHO_C" >&6; } ++if test "${ac_cv_func_shmat+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define shmat to an innocuous variant, in case declares shmat. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define shmat innocuous_shmat ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char shmat (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef shmat ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char shmat (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_shmat || defined __stub___shmat ++choke me ++#endif ++ ++int ++main () ++{ ++return shmat (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_shmat=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_func_shmat=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_shmat" >&5 ++echo "${ECHO_T}$ac_cv_func_shmat" >&6; } ++ ++ if test $ac_cv_func_shmat = no; then ++ { echo "$as_me:$LINENO: checking for shmat in -lipc" >&5 ++echo $ECHO_N "checking for shmat in -lipc... $ECHO_C" >&6; } ++if test "${ac_cv_lib_ipc_shmat+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lipc $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char shmat (); ++int ++main () ++{ ++return shmat (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_ipc_shmat=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_ipc_shmat=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_ipc_shmat" >&5 ++echo "${ECHO_T}$ac_cv_lib_ipc_shmat" >&6; } ++if test $ac_cv_lib_ipc_shmat = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc" ++fi ++ ++ fi ++ fi ++ ++ # Check for libraries that X11R6 Xt/Xaw programs need. ++ ac_save_LDFLAGS=$LDFLAGS ++ test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries" ++ # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to ++ # check for ICE first), but we must link in the order -lSM -lICE or ++ # we get undefined symbols. So assume we have SM if we have ICE. ++ # These have to be linked with before -lX11, unlike the other ++ # libraries we check for below, so use a different variable. ++ # John Interrante, Karl Berry ++ { echo "$as_me:$LINENO: checking for IceConnectionNumber in -lICE" >&5 ++echo $ECHO_N "checking for IceConnectionNumber in -lICE... $ECHO_C" >&6; } ++if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lICE $X_EXTRA_LIBS $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char IceConnectionNumber (); ++int ++main () ++{ ++return IceConnectionNumber (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_ICE_IceConnectionNumber=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_ICE_IceConnectionNumber=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5 ++echo "${ECHO_T}$ac_cv_lib_ICE_IceConnectionNumber" >&6; } ++if test $ac_cv_lib_ICE_IceConnectionNumber = yes; then ++ X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE" ++fi ++ ++ LDFLAGS=$ac_save_LDFLAGS ++ ++fi ++ ++ ++ALL_X_LIBS="$X_LIBS $X_PRE_LIBS -lX11 $X_EXTRA_LIBS" ++ ++SYSCONFDIR=$sysconfdir ++ ++DATADIR=$datadir ++ ++BINDIR=$bindir ++ ++SBINDIR=$sbindir ++ ++ ++ ++# Check whether --with-doc-dir was given. ++if test "${with_doc_dir+set}" = set; then ++ withval=$with_doc_dir; ++fi ++ ++ ++if ! test -z "$with_doc_dir"; then ++ DOCDIR="$with_doc_dir/gnome-power-manager-$VERSION" ++else ++ DOCDIR="$DATADIR/doc/gnome-power-manager-$VERSION" ++fi ++ ++ ++# Check whether --enable-policykit was given. ++if test "${enable_policykit+set}" = set; then ++ enableval=$enable_policykit; enable_policykit=$enableval ++else ++ enable_policykit=no ++fi ++ ++ ++{ echo "$as_me:$LINENO: checking whether to support PolicyKit" >&5 ++echo $ECHO_N "checking whether to support PolicyKit... $ECHO_C" >&6; } ++have_polkit=no ++if test x$enable_policykit = xyes ; then ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for POLKIT" >&5 ++echo $ECHO_N "checking for POLKIT... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$POLKIT_CFLAGS"; then ++ pkg_cv_POLKIT_CFLAGS="$POLKIT_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\\ ++ polkit-grant >= \$POLKIT_GNOME_REQUIRED\\ ++ polkit-dbus >= \$POLKIT_GNOME_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_POLKIT_CFLAGS=`$PKG_CONFIG --cflags "\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$POLKIT_LIBS"; then ++ pkg_cv_POLKIT_LIBS="$POLKIT_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\\ ++ polkit-grant >= \$POLKIT_GNOME_REQUIRED\\ ++ polkit-dbus >= \$POLKIT_GNOME_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_POLKIT_LIBS=`$PKG_CONFIG --libs "\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ POLKIT_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED"` ++ else ++ POLKIT_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$POLKIT_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements (\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED) were not met: ++ ++$POLKIT_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables POLKIT_CFLAGS ++and POLKIT_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED) were not met: ++ ++$POLKIT_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables POLKIT_CFLAGS ++and POLKIT_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables POLKIT_CFLAGS ++and POLKIT_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables POLKIT_CFLAGS ++and POLKIT_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ POLKIT_CFLAGS=$pkg_cv_POLKIT_CFLAGS ++ POLKIT_LIBS=$pkg_cv_POLKIT_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ have_polkit=yes ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_POLKIT 1 ++_ACEOF ++ ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++# Check whether --enable-checkfg was given. ++if test "${enable_checkfg+set}" = set; then ++ enableval=$enable_checkfg; enable_checkfg=$enableval ++else ++ enable_checkfg=no ++fi ++ ++ ++{ echo "$as_me:$LINENO: checking whether to use check-foreground-console" >&5 ++echo $ECHO_N "checking whether to use check-foreground-console... $ECHO_C" >&6; } ++have_checkfg=no ++if test x$enable_checkfg = xyes ; then ++ have_checkfg=yes ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_CHECK_FG 1 ++_ACEOF ++ ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++# Check whether --enable-xevents was given. ++if test "${enable_xevents+set}" = set; then ++ enableval=$enable_xevents; enable_xevents=$enableval ++else ++ enable_xevents=yes ++fi ++ ++ ++{ echo "$as_me:$LINENO: checking whether to support xevents" >&5 ++echo $ECHO_N "checking whether to support xevents... $ECHO_C" >&6; } ++have_xevents=no ++if test x$enable_xevents = xyes ; then ++ have_xevents=yes ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_XEVENTS 1 ++_ACEOF ++ ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++# Check whether --enable-tests was given. ++if test "${enable_tests+set}" = set; then ++ enableval=$enable_tests; enable_tests=$enableval ++else ++ enable_tests=no ++fi ++ ++ ++{ echo "$as_me:$LINENO: checking whether to support tests" >&5 ++echo $ECHO_N "checking whether to support tests... $ECHO_C" >&6; } ++have_tests=no ++if test x$enable_tests = xyes ; then ++ have_tests=yes ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_TESTS 1 ++_ACEOF ++ ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++if test $have_tests = yes; then ++ HAVE_TESTS_TRUE= ++ HAVE_TESTS_FALSE='#' ++else ++ HAVE_TESTS_TRUE='#' ++ HAVE_TESTS_FALSE= ++fi ++ ++ ++# Check whether --enable-gconf-defaults was given. ++if test "${enable_gconf_defaults+set}" = set; then ++ enableval=$enable_gconf_defaults; enable_gconfdefaults=$enableval ++else ++ enable_gconfdefaults=yes ++fi ++ ++ ++{ echo "$as_me:$LINENO: checking whether to support gconf defaults" >&5 ++echo $ECHO_N "checking whether to support gconf defaults... $ECHO_C" >&6; } ++have_gconfdefaults=no ++if test x$enable_gconfdefaults = xyes ; then ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for POLKIT_GNOME" >&5 ++echo $ECHO_N "checking for POLKIT_GNOME... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$POLKIT_GNOME_CFLAGS"; then ++ pkg_cv_POLKIT_GNOME_CFLAGS="$POLKIT_GNOME_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ polkit-gnome >= \$POLKIT_GNOME_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_POLKIT_GNOME_CFLAGS=`$PKG_CONFIG --cflags " ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$POLKIT_GNOME_LIBS"; then ++ pkg_cv_POLKIT_GNOME_LIBS="$POLKIT_GNOME_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ polkit-gnome >= \$POLKIT_GNOME_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_POLKIT_GNOME_LIBS=`$PKG_CONFIG --libs " ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ POLKIT_GNOME_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors " ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED"` ++ else ++ POLKIT_GNOME_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors " ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$POLKIT_GNOME_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements ( ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED) were not met: ++ ++$POLKIT_GNOME_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables POLKIT_GNOME_CFLAGS ++and POLKIT_GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements ( ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED) were not met: ++ ++$POLKIT_GNOME_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables POLKIT_GNOME_CFLAGS ++and POLKIT_GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables POLKIT_GNOME_CFLAGS ++and POLKIT_GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables POLKIT_GNOME_CFLAGS ++and POLKIT_GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ POLKIT_GNOME_CFLAGS=$pkg_cv_POLKIT_GNOME_CFLAGS ++ POLKIT_GNOME_LIBS=$pkg_cv_POLKIT_GNOME_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ have_gconfdefaults=yes ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_GCONF_DEFAULTS 1 ++_ACEOF ++ ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++if test $have_gconfdefaults = yes; then ++ HAVE_GCONF_DEFAULTS_TRUE= ++ HAVE_GCONF_DEFAULTS_FALSE='#' ++else ++ HAVE_GCONF_DEFAULTS_TRUE='#' ++ HAVE_GCONF_DEFAULTS_FALSE= ++fi ++ ++ ++# Check whether --enable-applets was given. ++if test "${enable_applets+set}" = set; then ++ enableval=$enable_applets; enable_applets=$enableval ++else ++ enable_applets=yes ++fi ++ ++ ++{ echo "$as_me:$LINENO: checking whether to build applet support" >&5 ++echo $ECHO_N "checking whether to build applet support... $ECHO_C" >&6; } ++have_applets=no ++if test x$enable_applets = xyes ; then ++ have_applets=yes ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_APPLETS 1 ++_ACEOF ++ ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++if test $have_applets = yes; then ++ HAVE_APPLETS_TRUE= ++ HAVE_APPLETS_FALSE='#' ++else ++ HAVE_APPLETS_TRUE='#' ++ HAVE_APPLETS_FALSE= ++fi ++ ++ ++# Check whether --enable-docbook-docs was given. ++if test "${enable_docbook_docs+set}" = set; then ++ enableval=$enable_docbook_docs; enable_docbook_docs=$enableval ++else ++ enable_docbook_docs=auto ++fi ++ ++ ++# Extract the first word of "xmlto", so it can be a program name with args. ++set dummy xmlto; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_XMLTO+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $XMLTO in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_XMLTO="$XMLTO" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_XMLTO="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ test -z "$ac_cv_path_XMLTO" && ac_cv_path_XMLTO="no" ++ ;; ++esac ++fi ++XMLTO=$ac_cv_path_XMLTO ++if test -n "$XMLTO"; then ++ { echo "$as_me:$LINENO: result: $XMLTO" >&5 ++echo "${ECHO_T}$XMLTO" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++{ echo "$as_me:$LINENO: checking whether to build DocBook documentation" >&5 ++echo $ECHO_N "checking whether to build DocBook documentation... $ECHO_C" >&6; } ++if test x$XMLTO = xno ; then ++ have_docbook=no ++else ++ have_docbook=yes ++fi ++if test x$enable_docbook_docs = xauto ; then ++ if test x$have_docbook = xno ; then ++ enable_docbook_docs=no ++ else ++ enable_docbook_docs=yes ++ fi ++fi ++if test x$enable_docbook_docs = xyes; then ++ if test x$have_docbook = xno; then ++ { { echo "$as_me:$LINENO: error: Building DocBook docs explicitly required, but DocBook not found" >&5 ++echo "$as_me: error: Building DocBook docs explicitly required, but DocBook not found" >&2;} ++ { (exit 1); exit 1; }; } ++ fi ++fi ++ ++ ++if test x$enable_docbook_docs = xyes; then ++ DOCBOOK_DOCS_ENABLED_TRUE= ++ DOCBOOK_DOCS_ENABLED_FALSE='#' ++else ++ DOCBOOK_DOCS_ENABLED_TRUE='#' ++ DOCBOOK_DOCS_ENABLED_FALSE= ++fi ++ ++{ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ ++ ++# Check whether --with-dbus-services was given. ++if test "${with_dbus_services+set}" = set; then ++ withval=$with_dbus_services; ++fi ++ ++ ++if ! test -z "$with_dbus_services" ; then ++ DBUS_SERVICES_DIR="$with_dbus_services" ++else ++ # D-BUS 0.23 and higher use $prefix/share/dbus-1/services ++ DBUS_SERVICES_DIR="$DATADIR/dbus-1/services" ++fi ++ ++ ++if $PKG_CONFIG --atleast-version $LIBNOTIFY_REQUIRED libnotify; then ++ have_libnotify=yes ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for LIBNOTIFY" >&5 ++echo $ECHO_N "checking for LIBNOTIFY... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$LIBNOTIFY_CFLAGS"; then ++ pkg_cv_LIBNOTIFY_CFLAGS="$LIBNOTIFY_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libnotify >= \$LIBNOTIFY_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "libnotify >= $LIBNOTIFY_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_LIBNOTIFY_CFLAGS=`$PKG_CONFIG --cflags "libnotify >= $LIBNOTIFY_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$LIBNOTIFY_LIBS"; then ++ pkg_cv_LIBNOTIFY_LIBS="$LIBNOTIFY_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libnotify >= \$LIBNOTIFY_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "libnotify >= $LIBNOTIFY_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_LIBNOTIFY_LIBS=`$PKG_CONFIG --libs "libnotify >= $LIBNOTIFY_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ LIBNOTIFY_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "libnotify >= $LIBNOTIFY_REQUIRED"` ++ else ++ LIBNOTIFY_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libnotify >= $LIBNOTIFY_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$LIBNOTIFY_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements (libnotify >= $LIBNOTIFY_REQUIRED) were not met: ++ ++$LIBNOTIFY_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables LIBNOTIFY_CFLAGS ++and LIBNOTIFY_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (libnotify >= $LIBNOTIFY_REQUIRED) were not met: ++ ++$LIBNOTIFY_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables LIBNOTIFY_CFLAGS ++and LIBNOTIFY_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables LIBNOTIFY_CFLAGS ++and LIBNOTIFY_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables LIBNOTIFY_CFLAGS ++and LIBNOTIFY_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ LIBNOTIFY_CFLAGS=$pkg_cv_LIBNOTIFY_CFLAGS ++ LIBNOTIFY_LIBS=$pkg_cv_LIBNOTIFY_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_LIBNOTIFY 1 ++_ACEOF ++ ++else ++ have_libnotify=no ++fi ++ ++ ++if test $have_libnotify = yes; then ++ HAVE_LIBNOTIFY_TRUE= ++ HAVE_LIBNOTIFY_FALSE='#' ++else ++ HAVE_LIBNOTIFY_TRUE='#' ++ HAVE_LIBNOTIFY_FALSE= ++fi ++ ++ ++if $PKG_CONFIG --atleast-version $UNIQUE_REQUIRED unique-1.0; then ++ have_unique=yes ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for UNIQUE" >&5 ++echo $ECHO_N "checking for UNIQUE... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$UNIQUE_CFLAGS"; then ++ pkg_cv_UNIQUE_CFLAGS="$UNIQUE_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"unique-1.0 >= \$UNIQUE_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "unique-1.0 >= $UNIQUE_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_UNIQUE_CFLAGS=`$PKG_CONFIG --cflags "unique-1.0 >= $UNIQUE_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$UNIQUE_LIBS"; then ++ pkg_cv_UNIQUE_LIBS="$UNIQUE_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"unique-1.0 >= \$UNIQUE_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "unique-1.0 >= $UNIQUE_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_UNIQUE_LIBS=`$PKG_CONFIG --libs "unique-1.0 >= $UNIQUE_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ UNIQUE_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "unique-1.0 >= $UNIQUE_REQUIRED"` ++ else ++ UNIQUE_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "unique-1.0 >= $UNIQUE_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$UNIQUE_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements (unique-1.0 >= $UNIQUE_REQUIRED) were not met: ++ ++$UNIQUE_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables UNIQUE_CFLAGS ++and UNIQUE_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (unique-1.0 >= $UNIQUE_REQUIRED) were not met: ++ ++$UNIQUE_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables UNIQUE_CFLAGS ++and UNIQUE_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables UNIQUE_CFLAGS ++and UNIQUE_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables UNIQUE_CFLAGS ++and UNIQUE_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ UNIQUE_CFLAGS=$pkg_cv_UNIQUE_CFLAGS ++ UNIQUE_LIBS=$pkg_cv_UNIQUE_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_UNIQUE 1 ++_ACEOF ++ ++else ++ have_unique=no ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_UNIQUE 0 ++_ACEOF ++ ++fi ++ ++ ++if test $have_unique = yes; then ++ HAVE_UNIQUE_TRUE= ++ HAVE_UNIQUE_FALSE='#' ++else ++ HAVE_UNIQUE_TRUE='#' ++ HAVE_UNIQUE_FALSE= ++fi ++ ++ ++ ++# Like AC_CHECK_HEADER, but it uses the already-computed -I directories. ++# ++ ++ ++# Like AC_TRY_COMPILE, but it uses the already-computed -I directories. ++# ++ ++ ++ ++# Like AC_CHECK_LIB, but it uses the already-computed -I and -L directories. ++# Use this sparingly; it probably doesn't work very well on X programs. ++# ++ ++ ++ ++# Usage: HANDLE_X_PATH_ARG([variable_name], ++# [--command-line-option], ++# [descriptive string]) ++# ++# All of the --with options take three forms: ++# ++# --with-foo (or --with-foo=yes) ++# --without-foo (or --with-foo=no) ++# --with-foo=/DIR ++# ++# This function, HANDLE_X_PATH_ARG, deals with the /DIR case. When it sees ++# a directory (string beginning with a slash) it checks to see whether ++# /DIR/include and /DIR/lib exist, and adds them to $X_CFLAGS and $X_LIBS ++# as appropriate. ++# ++ ++ ++ ++ ++have_dpms=no ++with_dpms_req=unspecified ++GPM_EXTRA_LIBS="-lresolv" ++ ++ ++# Check whether --with-dpms-ext was given. ++if test "${with_dpms_ext+set}" = set; then ++ withval=$with_dpms_ext; with_dpms="$withval"; with_dpms_req="$withval" ++else ++ with_dpms=yes ++fi ++ ++ ++ ++ case "$with_dpms" in ++ yes) ;; ++ no) ;; ++ ++ /*) ++ { echo "$as_me:$LINENO: checking for DPMS headers" >&5 ++echo $ECHO_N "checking for DPMS headers... $ECHO_C" >&6; } ++ d=$with_dpms/include ++ if test -d $d; then ++ X_CFLAGS="-I$d $X_CFLAGS" ++ { echo "$as_me:$LINENO: result: $d" >&5 ++echo "${ECHO_T}$d" >&6; } ++ else ++ { echo "$as_me:$LINENO: result: not found ($d: no such directory)" >&5 ++echo "${ECHO_T}not found ($d: no such directory)" >&6; } ++ fi ++ ++ { echo "$as_me:$LINENO: checking for DPMS libs" >&5 ++echo $ECHO_N "checking for DPMS libs... $ECHO_C" >&6; } ++ d=$with_dpms/lib ++ if test -d $d; then ++ X_LIBS="-L$d $X_LIBS" ++ { echo "$as_me:$LINENO: result: $d" >&5 ++echo "${ECHO_T}$d" >&6; } ++ else ++ { echo "$as_me:$LINENO: result: not found ($d: no such directory)" >&5 ++echo "${ECHO_T}not found ($d: no such directory)" >&6; } ++ fi ++ ++ # replace the directory string with "yes". ++ with_dpms_req="yes" ++ with_dpms=$with_dpms_req ++ ;; ++ ++ *) ++ echo "" ++ echo "error: argument to --with-dpms-ext must be \"yes\", \"no\", or a directory." ++ echo " If it is a directory, then \`DIR/include' will be added to" ++ echo " the -I list, and \`DIR/lib' will be added to the -L list." ++ exit 1 ++ ;; ++ esac ++ ++ ++if test "$with_dpms" = yes; then ++ ++ # first check for dpms.h ++ ++ ac_save_CPPFLAGS="$CPPFLAGS" ++ if test \! -z "$includedir" ; then ++ CPPFLAGS="$CPPFLAGS -I$includedir" ++ fi ++ CPPFLAGS="$CPPFLAGS $X_CFLAGS" ++ { echo "$as_me:$LINENO: checking for X11/extensions/dpms.h" >&5 ++echo $ECHO_N "checking for X11/extensions/dpms.h... $ECHO_C" >&6; } ++if test "${ac_cv_header_X11_extensions_dpms_h+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++ #include ++ ++@%:@include ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_header_X11_extensions_dpms_h=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_header_X11_extensions_dpms_h=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_header_X11_extensions_dpms_h" >&5 ++echo "${ECHO_T}$ac_cv_header_X11_extensions_dpms_h" >&6; } ++if test $ac_cv_header_X11_extensions_dpms_h = yes; then ++ have_dpms=yes ++fi ++ ++ ++ CPPFLAGS="$ac_save_CPPFLAGS" ++ ++ # if that succeeded, then check for the DPMS code in the libraries ++ if test "$have_dpms" = yes; then ++ ++ # first look in -lXext (this is where it is with XFree86 4.0) ++ have_dpms=no ++ ++ ac_save_CPPFLAGS="$CPPFLAGS" ++ ac_save_LDFLAGS="$LDFLAGS" ++# ac_save_LIBS="$LIBS" ++ ++ if test \! -z "$includedir" ; then ++ CPPFLAGS="$CPPFLAGS -I$includedir" ++ fi ++ # note: $X_CFLAGS includes $x_includes ++ CPPFLAGS="$CPPFLAGS $X_CFLAGS" ++ ++ if test \! -z "$libdir" ; then ++ LDFLAGS="$LDFLAGS -L$libdir" ++ fi ++ # note: $X_LIBS includes $x_libraries ++ LDFLAGS="$LDFLAGS $ALL_X_LIBS" ++ ++ { echo "$as_me:$LINENO: checking for DPMSInfo in -lXext" >&5 ++echo $ECHO_N "checking for DPMSInfo in -lXext... $ECHO_C" >&6; } ++if test "${ac_cv_lib_Xext_DPMSInfo+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lXext -lXext -lX11 $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char DPMSInfo (); ++int ++main () ++{ ++return DPMSInfo (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_Xext_DPMSInfo=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_Xext_DPMSInfo=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_Xext_DPMSInfo" >&5 ++echo "${ECHO_T}$ac_cv_lib_Xext_DPMSInfo" >&6; } ++if test $ac_cv_lib_Xext_DPMSInfo = yes; then ++ have_dpms=yes ++else ++ true ++fi ++ ++ CPPFLAGS="$ac_save_CPPFLAGS" ++ LDFLAGS="$ac_save_LDFLAGS" ++# LIBS="$ac_save_LIBS" ++ ++ ++ # if that failed, look in -lXdpms (this is where it was in XFree86 3.x) ++ if test "$have_dpms" = no; then ++ ++ ac_save_CPPFLAGS="$CPPFLAGS" ++ ac_save_LDFLAGS="$LDFLAGS" ++# ac_save_LIBS="$LIBS" ++ ++ if test \! -z "$includedir" ; then ++ CPPFLAGS="$CPPFLAGS -I$includedir" ++ fi ++ # note: $X_CFLAGS includes $x_includes ++ CPPFLAGS="$CPPFLAGS $X_CFLAGS" ++ ++ if test \! -z "$libdir" ; then ++ LDFLAGS="$LDFLAGS -L$libdir" ++ fi ++ # note: $X_LIBS includes $x_libraries ++ LDFLAGS="$LDFLAGS $ALL_X_LIBS" ++ ++ { echo "$as_me:$LINENO: checking for DPMSInfo in -lXdpms" >&5 ++echo $ECHO_N "checking for DPMSInfo in -lXdpms... $ECHO_C" >&6; } ++if test "${ac_cv_lib_Xdpms_DPMSInfo+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lXdpms -lXext -lX11 $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char DPMSInfo (); ++int ++main () ++{ ++return DPMSInfo (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_Xdpms_DPMSInfo=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_Xdpms_DPMSInfo=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_Xdpms_DPMSInfo" >&5 ++echo "${ECHO_T}$ac_cv_lib_Xdpms_DPMSInfo" >&6; } ++if test $ac_cv_lib_Xdpms_DPMSInfo = yes; then ++ have_dpms=yes; XDPMS_LIBS="-lXdpms" ++else ++ true ++fi ++ ++ CPPFLAGS="$ac_save_CPPFLAGS" ++ LDFLAGS="$ac_save_LDFLAGS" ++# LIBS="$ac_save_LIBS" ++ ++ fi ++ fi ++ ++ ++ # if that succeeded, then we've really got it. ++ if test "$have_dpms" = yes; then ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_DPMS_EXTENSION 1 ++_ACEOF ++ ++ GPM_EXTRA_LIBS="$GPM_EXTRA_LIBS -lXext" ++ fi ++ ++elif test "$with_dpms" != no; then ++ echo "error: must be yes or no: --with-dpms-ext=$with_dpms" ++ exit 1 ++fi ++ ++{ echo "$as_me:$LINENO: checking for Solaris kstat" >&5 ++echo $ECHO_N "checking for Solaris kstat... $ECHO_C" >&6; } ++{ echo "$as_me:$LINENO: checking for kstat_open in -lkstat" >&5 ++echo $ECHO_N "checking for kstat_open in -lkstat... $ECHO_C" >&6; } ++if test "${ac_cv_lib_kstat_kstat_open+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lkstat $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char kstat_open (); ++int ++main () ++{ ++return kstat_open (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_kstat_kstat_open=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_kstat_kstat_open=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_kstat_kstat_open" >&5 ++echo "${ECHO_T}$ac_cv_lib_kstat_kstat_open" >&6; } ++if test $ac_cv_lib_kstat_kstat_open = yes; then ++ ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_KSTAT 1 ++_ACEOF ++ ++ GPM_EXTRA_LIBS="$GPM_EXTRA_LIBS -lkstat" ++ ++fi ++ ++ ++ ++# Extract the first word of "docbook2man", so it can be a program name with args. ++set dummy docbook2man; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_DOCBOOK2MAN+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $DOCBOOK2MAN in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_DOCBOOK2MAN="$DOCBOOK2MAN" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_DOCBOOK2MAN="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ test -z "$ac_cv_path_DOCBOOK2MAN" && ac_cv_path_DOCBOOK2MAN="no" ++ ;; ++esac ++fi ++DOCBOOK2MAN=$ac_cv_path_DOCBOOK2MAN ++if test -n "$DOCBOOK2MAN"; then ++ { echo "$as_me:$LINENO: result: $DOCBOOK2MAN" >&5 ++echo "${ECHO_T}$DOCBOOK2MAN" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++if test "$DOCBOOK2MAN" = "no" ; then ++ { echo "$as_me:$LINENO: WARNING: docbook2man not found, will not be able to build man documentation" >&5 ++echo "$as_me: WARNING: docbook2man not found, will not be able to build man documentation" >&2;} ++fi ++ ++ ++if test "$DOCBOOK2MAN" != "no"; then ++ HAVE_DOCBOOK2MAN_TRUE= ++ HAVE_DOCBOOK2MAN_FALSE='#' ++else ++ HAVE_DOCBOOK2MAN_TRUE='#' ++ HAVE_DOCBOOK2MAN_FALSE= ++fi ++ ++ ++ ++# Check whether --enable-more-warnings was given. ++if test "${enable_more_warnings+set}" = set; then ++ enableval=$enable_more_warnings; set_more_warnings="$enableval" ++else ++ ++if test -d $srcdir/CVS; then ++ is_cvs_version=true ++ set_more_warnings=yes ++else ++ set_more_warnings=no ++fi ++ ++fi ++ ++{ echo "$as_me:$LINENO: checking for more warnings" >&5 ++echo $ECHO_N "checking for more warnings... $ECHO_C" >&6; } ++if test "$GCC" = "yes" -a "$set_more_warnings" != "no"; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ CFLAGS="\ ++ -Wall \ ++ -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes \ ++ -Wnested-externs -Wpointer-arith \ ++ -Wcast-align -Wsign-compare \ ++ $CFLAGS" ++ ++ for option in -Wno-strict-aliasing -Wno-sign-compare; do ++ SAVE_CFLAGS="$CFLAGS" ++ CFLAGS="$CFLAGS $option" ++ { echo "$as_me:$LINENO: checking whether gcc understands $option" >&5 ++echo $ECHO_N "checking whether gcc understands $option... $ECHO_C" >&6; } ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ has_option=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ has_option=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ if test $has_option = no; then ++ CFLAGS="$SAVE_CFLAGS" ++ fi ++ { echo "$as_me:$LINENO: result: $has_option" >&5 ++echo "${ECHO_T}$has_option" >&6; } ++ unset has_option ++ unset SAVE_CFLAGS ++ done ++ unset option ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ac_config_files="$ac_config_files Makefile src/Makefile src/dbus/Makefile applets/Makefile applets/brightness/Makefile applets/inhibit/Makefile libhal-glib/Makefile libdbus-glib/Makefile libidletime/Makefile libunique/Makefile docs/Makefile man/Makefile help/Makefile po/Makefile.in tools/Makefile test/Makefile data/Makefile data/gnome-power-manager.desktop.in data/gnome-power-preferences.desktop.in data/gnome-power-statistics.desktop.in data/sounds/Makefile data/icons/Makefile data/icons/16x16/Makefile data/icons/16x16/actions/Makefile data/icons/16x16/apps/Makefile data/icons/16x16/status/Makefile data/icons/22x22/Makefile data/icons/22x22/actions/Makefile data/icons/22x22/apps/Makefile data/icons/22x22/status/Makefile data/icons/24x24/Makefile data/icons/24x24/actions/Makefile data/icons/24x24/apps/Makefile data/icons/24x24/status/Makefile data/icons/48x48/Makefile data/icons/48x48/actions/Makefile data/icons/48x48/apps/Makefile data/icons/48x48/status/Makefile data/icons/scalable/Makefile data/icons/scalable/actions/Makefile data/icons/scalable/apps/Makefile data/icons/scalable/status/Makefile" ++ ++ ++cat >confcache <<\_ACEOF ++# This file is a shell script that caches the results of configure ++# tests run on this system so they can be shared between configure ++# scripts and configure runs, see configure's option --config-cache. ++# It is not useful on other systems. If it contains results you don't ++# want to keep, you may remove or edit it. ++# ++# config.status only pays attention to the cache file if you give it ++# the --recheck option to rerun configure. ++# ++# `ac_cv_env_foo' variables (set or unset) will be overridden when ++# loading this file, other *unset* `ac_cv_foo' will be assigned the ++# following values. ++ ++_ACEOF ++ ++# The following way of writing the cache mishandles newlines in values, ++# but we know of no workaround that is simple, portable, and efficient. ++# So, we kill variables containing newlines. ++# Ultrix sh set writes to stderr and can't be redirected directly, ++# and sets the high bit in the cache file unless we assign to the vars. ++( ++ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ *) $as_unset $ac_var ;; ++ esac ;; ++ esac ++ done ++ ++ (set) 2>&1 | ++ case $as_nl`(ac_space=' '; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) ++ # `set' does not quote correctly, so add quotes (double-quote ++ # substitution turns \\\\ into \\, and sed turns \\ into \). ++ sed -n \ ++ "s/'/'\\\\''/g; ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ++ ;; #( ++ *) ++ # `set' quotes correctly as required by POSIX, so do not add quotes. ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ++ ;; ++ esac | ++ sort ++) | ++ sed ' ++ /^ac_cv_env_/b end ++ t clear ++ :clear ++ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ ++ t end ++ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ ++ :end' >>confcache ++if diff "$cache_file" confcache >/dev/null 2>&1; then :; else ++ if test -w "$cache_file"; then ++ test "x$cache_file" != "x/dev/null" && ++ { echo "$as_me:$LINENO: updating cache $cache_file" >&5 ++echo "$as_me: updating cache $cache_file" >&6;} ++ cat confcache >$cache_file ++ else ++ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 ++echo "$as_me: not updating unwritable cache $cache_file" >&6;} ++ fi ++fi ++rm -f confcache ++ ++test "x$prefix" = xNONE && prefix=$ac_default_prefix ++# Let make expand exec_prefix. ++test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' ++ ++DEFS=-DHAVE_CONFIG_H ++ ++ac_libobjs= ++ac_ltlibobjs= ++for ac_i in : $LIB@&t@OBJS; do test "x$ac_i" = x: && continue ++ # 1. Remove the extension, and $U if already installed. ++ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ++ ac_i=`echo "$ac_i" | sed "$ac_script"` ++ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR ++ # will be set to the directory where LIBOBJS objects are built. ++ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" ++ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' ++done ++LIB@&t@OBJS=$ac_libobjs ++ ++LTLIBOBJS=$ac_ltlibobjs ++ ++ ++if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"AMDEP\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++ ac_config_commands="$ac_config_commands po/stamp-it" ++ ++ ++if test -z "${ENABLE_SK_TRUE}" && test -z "${ENABLE_SK_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"ENABLE_SK\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"ENABLE_SK\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${HAVE_GNOME_DOC_UTILS_TRUE}" && test -z "${HAVE_GNOME_DOC_UTILS_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_GNOME_DOC_UTILS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"HAVE_GNOME_DOC_UTILS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${GCONF_SCHEMAS_INSTALL_TRUE}" && test -z "${GCONF_SCHEMAS_INSTALL_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"GCONF_SCHEMAS_INSTALL\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"GCONF_SCHEMAS_INSTALL\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${HAVE_TESTS_TRUE}" && test -z "${HAVE_TESTS_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_TESTS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"HAVE_TESTS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${HAVE_GCONF_DEFAULTS_TRUE}" && test -z "${HAVE_GCONF_DEFAULTS_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_GCONF_DEFAULTS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"HAVE_GCONF_DEFAULTS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${HAVE_APPLETS_TRUE}" && test -z "${HAVE_APPLETS_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_APPLETS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"HAVE_APPLETS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${DOCBOOK_DOCS_ENABLED_TRUE}" && test -z "${DOCBOOK_DOCS_ENABLED_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"DOCBOOK_DOCS_ENABLED\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"DOCBOOK_DOCS_ENABLED\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${HAVE_LIBNOTIFY_TRUE}" && test -z "${HAVE_LIBNOTIFY_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_LIBNOTIFY\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"HAVE_LIBNOTIFY\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${HAVE_UNIQUE_TRUE}" && test -z "${HAVE_UNIQUE_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_UNIQUE\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"HAVE_UNIQUE\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${HAVE_DOCBOOK2MAN_TRUE}" && test -z "${HAVE_DOCBOOK2MAN_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_DOCBOOK2MAN\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"HAVE_DOCBOOK2MAN\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++: ${CONFIG_STATUS=./config.status} ++ac_clean_files_save=$ac_clean_files ++ac_clean_files="$ac_clean_files $CONFIG_STATUS" ++{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 ++echo "$as_me: creating $CONFIG_STATUS" >&6;} ++cat >$CONFIG_STATUS <<_ACEOF ++#! $SHELL ++# Generated by $as_me. ++# Run this file to recreate the current configuration. ++# Compiler output produced by configure, useful for debugging ++# configure, is in config.log if it exists. ++ ++debug=false ++ac_cs_recheck=false ++ac_cs_silent=false ++SHELL=\${CONFIG_SHELL-$SHELL} ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF ++## --------------------- ## ++## M4sh Initialization. ## ++## --------------------- ## ++ ++# Be more Bourne compatible ++DUALCASE=1; export DUALCASE # for MKS sh ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++ ++ ++# PATH needs CR ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits ++ ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ echo "#! /bin/sh" >conf$$.sh ++ echo "exit 0" >>conf$$.sh ++ chmod +x conf$$.sh ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then ++ PATH_SEPARATOR=';' ++ else ++ PATH_SEPARATOR=: ++ fi ++ rm -f conf$$.sh ++fi ++ ++# Support unset when possible. ++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then ++ as_unset=unset ++else ++ as_unset=false ++fi ++ ++ ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++as_nl=' ++' ++IFS=" "" $as_nl" ++ ++# Find who we are. Look in the path if we contain no directory separator. ++case $0 in ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 ++fi ++if test ! -f "$as_myself"; then ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ { (exit 1); exit 1; } ++fi ++ ++# Work around bugs in pre-3.0 UWIN ksh. ++for as_var in ENV MAIL MAILPATH ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++done ++PS1='$ ' ++PS2='> ' ++PS4='+ ' ++ ++# NLS nuisances. ++for as_var in \ ++ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ ++ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ ++ LC_TELEPHONE LC_TIME ++do ++ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then ++ eval $as_var=C; export $as_var ++ else ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++ fi ++done ++ ++# Required to use basename. ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then ++ as_expr=expr ++else ++ as_expr=false ++fi ++ ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then ++ as_basename=basename ++else ++ as_basename=false ++fi ++ ++ ++# Name of the executable. ++as_me=`$as_basename -- "$0" || ++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ ++ X"$0" : 'X\(//\)$' \| \ ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || ++echo X/"$0" | ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ ++# CDPATH. ++$as_unset CDPATH ++ ++ ++ ++ as_lineno_1=$LINENO ++ as_lineno_2=$LINENO ++ test "x$as_lineno_1" != "x$as_lineno_2" && ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { ++ ++ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO ++ # uniformly replaced by the line number. The first 'sed' inserts a ++ # line-number line after each line using $LINENO; the second 'sed' ++ # does the real work. The second script uses 'N' to pair each ++ # line-number line with the line containing $LINENO, and appends ++ # trailing '-' during substitution so that $LINENO is not a special ++ # case at line end. ++ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the ++ # scripts with optimization help from Paolo Bonzini. Blame Lee ++ # E. McMahon (1931-1989) for sed's syntax. :-) ++ sed -n ' ++ p ++ /[$]LINENO/= ++ ' <$as_myself | ++ sed ' ++ s/[$]LINENO.*/&-/ ++ t lineno ++ b ++ :lineno ++ N ++ :loop ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ ++ t loop ++ s/-\n.*// ++ ' >$as_me.lineno && ++ chmod +x "$as_me.lineno" || ++ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 ++ { (exit 1); exit 1; }; } ++ ++ # Don't try to exec as it changes $[0], causing all sort of problems ++ # (the dirname of $[0] is not the place where we might find the ++ # original and so on. Autoconf is especially sensitive to this). ++ . "./$as_me.lineno" ++ # Exit status is that of the last command. ++ exit ++} ++ ++ ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false ++fi ++ ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in ++-n*) ++ case `echo 'x\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ *) ECHO_C='\c';; ++ esac;; ++*) ++ ECHO_N='-n';; ++esac ++ ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then ++ as_expr=expr ++else ++ as_expr=false ++fi ++ ++rm -f conf$$ conf$$.exe conf$$.file ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file ++else ++ rm -f conf$$.dir ++ mkdir conf$$.dir ++fi ++echo >conf$$.file ++if ln -s conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || ++ as_ln_s='cp -p' ++elif ln conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s=ln ++else ++ as_ln_s='cp -p' ++fi ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null ++ ++if mkdir -p . 2>/dev/null; then ++ as_mkdir_p=: ++else ++ test -d ./-p && rmdir ./-p ++ as_mkdir_p=false ++fi ++ ++if test -x / >/dev/null 2>&1; then ++ as_test_x='test -x' ++else ++ if ls -dL / >/dev/null 2>&1; then ++ as_ls_L_option=L ++ else ++ as_ls_L_option= ++ fi ++ as_test_x=' ++ eval sh -c '\'' ++ if test -d "$1"; then ++ test -d "$1/."; ++ else ++ case $1 in ++ -*)set "./$1";; ++ esac; ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ++ ???[sx]*):;;*)false;;esac;fi ++ '\'' sh ++ ' ++fi ++as_executable_p=$as_test_x ++ ++# Sed expression to map a string onto a valid CPP name. ++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" ++ ++# Sed expression to map a string onto a valid variable name. ++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" ++ ++ ++exec 6>&1 ++ ++# Save the log message, to keep $[0] and so on meaningful, and to ++# report actual input values of CONFIG_FILES etc. instead of their ++# values after options handling. ++ac_log=" ++This file was extended by gnome-power-manager $as_me 2.24.0, which was ++generated by GNU Autoconf 2.61. Invocation command line was ++ ++ CONFIG_FILES = $CONFIG_FILES ++ CONFIG_HEADERS = $CONFIG_HEADERS ++ CONFIG_LINKS = $CONFIG_LINKS ++ CONFIG_COMMANDS = $CONFIG_COMMANDS ++ $ $0 $@ ++ ++on `(hostname || uname -n) 2>/dev/null | sed 1q` ++" ++ ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<_ACEOF ++# Files that config.status was made for. ++config_files="$ac_config_files" ++config_headers="$ac_config_headers" ++config_commands="$ac_config_commands" ++ ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF ++ac_cs_usage="\ ++\`$as_me' instantiates files from templates according to the ++current configuration. ++ ++Usage: $0 [OPTIONS] [FILE]... ++ ++ -h, --help print this help, then exit ++ -V, --version print version number and configuration settings, then exit ++ -q, --quiet do not print progress messages ++ -d, --debug don't remove temporary files ++ --recheck update $as_me by reconfiguring in the same conditions ++ --file=FILE[:TEMPLATE] ++ instantiate the configuration file FILE ++ --header=FILE[:TEMPLATE] ++ instantiate the configuration header FILE ++ ++Configuration files: ++$config_files ++ ++Configuration headers: ++$config_headers ++ ++Configuration commands: ++$config_commands ++ ++Report bugs to ." ++ ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF ++ac_cs_version="\\ ++gnome-power-manager config.status 2.24.0 ++configured by $0, generated by GNU Autoconf 2.61, ++ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" ++ ++Copyright (C) 2006 Free Software Foundation, Inc. ++This config.status script is free software; the Free Software Foundation ++gives unlimited permission to copy, distribute and modify it." ++ ++ac_pwd='$ac_pwd' ++srcdir='$srcdir' ++INSTALL='$INSTALL' ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF ++# If no file are specified by the user, then we need to provide default ++# value. By we need to know if files were specified by the user. ++ac_need_defaults=: ++while test $# != 0 ++do ++ case $1 in ++ --*=*) ++ ac_option=`expr "X$1" : 'X\([^=]*\)='` ++ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ++ ac_shift=: ++ ;; ++ *) ++ ac_option=$1 ++ ac_optarg=$2 ++ ac_shift=shift ++ ;; ++ esac ++ ++ case $ac_option in ++ # Handling of the options. ++ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ++ ac_cs_recheck=: ;; ++ --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) ++ echo "$ac_cs_version"; exit ;; ++ --debug | --debu | --deb | --de | --d | -d ) ++ debug=: ;; ++ --file | --fil | --fi | --f ) ++ $ac_shift ++ CONFIG_FILES="$CONFIG_FILES $ac_optarg" ++ ac_need_defaults=false;; ++ --header | --heade | --head | --hea ) ++ $ac_shift ++ CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" ++ ac_need_defaults=false;; ++ --he | --h) ++ # Conflict between --help and --header ++ { echo "$as_me: error: ambiguous option: $1 ++Try \`$0 --help' for more information." >&2 ++ { (exit 1); exit 1; }; };; ++ --help | --hel | -h ) ++ echo "$ac_cs_usage"; exit ;; ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ++ | -silent | --silent | --silen | --sile | --sil | --si | --s) ++ ac_cs_silent=: ;; ++ ++ # This is an error. ++ -*) { echo "$as_me: error: unrecognized option: $1 ++Try \`$0 --help' for more information." >&2 ++ { (exit 1); exit 1; }; } ;; ++ ++ *) ac_config_targets="$ac_config_targets $1" ++ ac_need_defaults=false ;; ++ ++ esac ++ shift ++done ++ ++ac_configure_extra_args= ++ ++if $ac_cs_silent; then ++ exec 6>/dev/null ++ ac_configure_extra_args="$ac_configure_extra_args --silent" ++fi ++ ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF ++if \$ac_cs_recheck; then ++ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 ++ CONFIG_SHELL=$SHELL ++ export CONFIG_SHELL ++ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion ++fi ++ ++_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF ++exec 5>>config.log ++{ ++ echo ++ sed 'h;s/./-/g;s/^.../@%:@@%:@ /;s/...$/ @%:@@%:@/;p;x;p;x' <<_ASBOX ++@%:@@%:@ Running $as_me. @%:@@%:@ ++_ASBOX ++ echo "$ac_log" ++} >&5 ++ ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF ++# ++# INIT-COMMANDS ++# ++AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" ++ ++ ++# The HP-UX ksh and POSIX shell print the target directory to stdout ++# if CDPATH is set. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++ ++sed_quote_subst='$sed_quote_subst' ++double_quote_subst='$double_quote_subst' ++delay_variable_subst='$delay_variable_subst' ++macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`' ++macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`' ++enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`' ++enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`' ++pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`' ++enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`' ++host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`' ++host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`' ++host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`' ++build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`' ++build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`' ++build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`' ++SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`' ++Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`' ++GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`' ++EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`' ++FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`' ++LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`' ++NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`' ++LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`' ++max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`' ++ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`' ++exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`' ++lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`' ++lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`' ++lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`' ++reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`' ++reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`' ++file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`' ++AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`' ++AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`' ++STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`' ++RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`' ++old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`' ++CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`' ++compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`' ++GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' ++objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`' ++SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`' ++ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`' ++MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`' ++lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`' ++lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`' ++lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`' ++lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`' ++need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`' ++DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`' ++NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`' ++LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`' ++OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`' ++OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`' ++libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`' ++shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`' ++enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`' ++export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' ++whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' ++compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`' ++old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`' ++allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' ++no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`' ++inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`' ++link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`' ++fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`' ++always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`' ++export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`' ++include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`' ++prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`' ++variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`' ++need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' ++need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`' ++version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`' ++runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`' ++shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' ++shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`' ++libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`' ++library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`' ++soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`' ++postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`' ++sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`' ++sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`' ++enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`' ++enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`' ++enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`' ++old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`' ++striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`' ++ ++LTCC='$LTCC' ++LTCFLAGS='$LTCFLAGS' ++compiler='$compiler_DEFAULT' ++ ++# Quote evaled strings. ++for var in SED \ ++GREP \ ++EGREP \ ++FGREP \ ++LD \ ++NM \ ++LN_S \ ++lt_SP2NL \ ++lt_NL2SP \ ++reload_flag \ ++deplibs_check_method \ ++file_magic_cmd \ ++AR \ ++AR_FLAGS \ ++STRIP \ ++RANLIB \ ++CC \ ++CFLAGS \ ++compiler \ ++lt_cv_sys_global_symbol_pipe \ ++lt_cv_sys_global_symbol_to_cdecl \ ++lt_cv_sys_global_symbol_to_c_name_address \ ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ ++SHELL \ ++ECHO \ ++lt_prog_compiler_no_builtin_flag \ ++lt_prog_compiler_wl \ ++lt_prog_compiler_pic \ ++lt_prog_compiler_static \ ++lt_cv_prog_compiler_c_o \ ++need_locks \ ++DSYMUTIL \ ++NMEDIT \ ++LIPO \ ++OTOOL \ ++OTOOL64 \ ++shrext_cmds \ ++export_dynamic_flag_spec \ ++whole_archive_flag_spec \ ++compiler_needs_object \ ++with_gnu_ld \ ++allow_undefined_flag \ ++no_undefined_flag \ ++hardcode_libdir_flag_spec \ ++hardcode_libdir_flag_spec_ld \ ++hardcode_libdir_separator \ ++fix_srcfile_path \ ++exclude_expsyms \ ++include_expsyms \ ++file_list_spec \ ++variables_saved_for_relink \ ++libname_spec \ ++library_names_spec \ ++soname_spec \ ++finish_eval \ ++old_striplib \ ++striplib; do ++ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in ++ *[\\\\\\\`\\"\\\$]*) ++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ++ ;; ++ *) ++ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ++ ;; ++ esac ++done ++ ++# Double-quote double-evaled strings. ++for var in reload_cmds \ ++old_postinstall_cmds \ ++old_postuninstall_cmds \ ++old_archive_cmds \ ++extract_expsyms_cmds \ ++old_archive_from_new_cmds \ ++old_archive_from_expsyms_cmds \ ++archive_cmds \ ++archive_expsym_cmds \ ++module_cmds \ ++module_expsym_cmds \ ++export_symbols_cmds \ ++prelink_cmds \ ++postinstall_cmds \ ++postuninstall_cmds \ ++finish_cmds \ ++sys_lib_search_path_spec \ ++sys_lib_dlsearch_path_spec; do ++ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in ++ *[\\\\\\\`\\"\\\$]*) ++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ++ ;; ++ *) ++ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ++ ;; ++ esac ++done ++ ++# Fix-up fallback echo if it was mangled by the above quoting rules. ++case \$lt_ECHO in ++*'\\\$0 --fallback-echo"') lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\` ++ ;; ++esac ++ ++ac_aux_dir='$ac_aux_dir' ++xsi_shell='$xsi_shell' ++lt_shell_append='$lt_shell_append' ++ ++# See if we are running on zsh, and set the options which allow our ++# commands through without removal of \ escapes INIT. ++if test -n "\${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++fi ++ ++ ++ PACKAGE='$PACKAGE' ++ VERSION='$VERSION' ++ TIMESTAMP='$TIMESTAMP' ++ RM='$RM' ++ ofile='$ofile' ++ ++ ++ ++INTLTOOL_PERL='${INTLTOOL_PERL}' ac_aux_dir='${ac_aux_dir}' ++prefix="$prefix" exec_prefix="$exec_prefix" INTLTOOL_LIBDIR="$libdir" ++INTLTOOL_EXTRACT='${INTLTOOL_EXTRACT}' ++ ++ ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF ++ ++# Handling of arguments. ++for ac_config_target in $ac_config_targets ++do ++ case $ac_config_target in ++ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; ++ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; ++ "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; ++ "intltool") CONFIG_COMMANDS="$CONFIG_COMMANDS intltool" ;; ++ "default-1") CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;; ++ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; ++ "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; ++ "src/dbus/Makefile") CONFIG_FILES="$CONFIG_FILES src/dbus/Makefile" ;; ++ "applets/Makefile") CONFIG_FILES="$CONFIG_FILES applets/Makefile" ;; ++ "applets/brightness/Makefile") CONFIG_FILES="$CONFIG_FILES applets/brightness/Makefile" ;; ++ "applets/inhibit/Makefile") CONFIG_FILES="$CONFIG_FILES applets/inhibit/Makefile" ;; ++ "libhal-glib/Makefile") CONFIG_FILES="$CONFIG_FILES libhal-glib/Makefile" ;; ++ "libdbus-glib/Makefile") CONFIG_FILES="$CONFIG_FILES libdbus-glib/Makefile" ;; ++ "libidletime/Makefile") CONFIG_FILES="$CONFIG_FILES libidletime/Makefile" ;; ++ "libunique/Makefile") CONFIG_FILES="$CONFIG_FILES libunique/Makefile" ;; ++ "docs/Makefile") CONFIG_FILES="$CONFIG_FILES docs/Makefile" ;; ++ "man/Makefile") CONFIG_FILES="$CONFIG_FILES man/Makefile" ;; ++ "help/Makefile") CONFIG_FILES="$CONFIG_FILES help/Makefile" ;; ++ "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; ++ "tools/Makefile") CONFIG_FILES="$CONFIG_FILES tools/Makefile" ;; ++ "test/Makefile") CONFIG_FILES="$CONFIG_FILES test/Makefile" ;; ++ "data/Makefile") CONFIG_FILES="$CONFIG_FILES data/Makefile" ;; ++ "data/gnome-power-manager.desktop.in") CONFIG_FILES="$CONFIG_FILES data/gnome-power-manager.desktop.in" ;; ++ "data/gnome-power-preferences.desktop.in") CONFIG_FILES="$CONFIG_FILES data/gnome-power-preferences.desktop.in" ;; ++ "data/gnome-power-statistics.desktop.in") CONFIG_FILES="$CONFIG_FILES data/gnome-power-statistics.desktop.in" ;; ++ "data/sounds/Makefile") CONFIG_FILES="$CONFIG_FILES data/sounds/Makefile" ;; ++ "data/icons/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/Makefile" ;; ++ "data/icons/16x16/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/16x16/Makefile" ;; ++ "data/icons/16x16/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/16x16/actions/Makefile" ;; ++ "data/icons/16x16/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/16x16/apps/Makefile" ;; ++ "data/icons/16x16/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/16x16/status/Makefile" ;; ++ "data/icons/22x22/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/22x22/Makefile" ;; ++ "data/icons/22x22/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/22x22/actions/Makefile" ;; ++ "data/icons/22x22/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/22x22/apps/Makefile" ;; ++ "data/icons/22x22/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/22x22/status/Makefile" ;; ++ "data/icons/24x24/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/24x24/Makefile" ;; ++ "data/icons/24x24/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/24x24/actions/Makefile" ;; ++ "data/icons/24x24/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/24x24/apps/Makefile" ;; ++ "data/icons/24x24/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/24x24/status/Makefile" ;; ++ "data/icons/48x48/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/48x48/Makefile" ;; ++ "data/icons/48x48/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/48x48/actions/Makefile" ;; ++ "data/icons/48x48/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/48x48/apps/Makefile" ;; ++ "data/icons/48x48/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/48x48/status/Makefile" ;; ++ "data/icons/scalable/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/scalable/Makefile" ;; ++ "data/icons/scalable/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/scalable/actions/Makefile" ;; ++ "data/icons/scalable/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/scalable/apps/Makefile" ;; ++ "data/icons/scalable/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/scalable/status/Makefile" ;; ++ "po/stamp-it") CONFIG_COMMANDS="$CONFIG_COMMANDS po/stamp-it" ;; ++ ++ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 ++echo "$as_me: error: invalid argument: $ac_config_target" >&2;} ++ { (exit 1); exit 1; }; };; ++ esac ++done ++ ++ ++# If the user did not use the arguments to specify the items to instantiate, ++# then the envvar interface is used. Set only those that are not. ++# We use the long form for the default assignment because of an extremely ++# bizarre bug on SunOS 4.1.3. ++if $ac_need_defaults; then ++ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files ++ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers ++ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands ++fi ++ ++# Have a temporary directory for convenience. Make it in the build tree ++# simply because there is no reason against having it here, and in addition, ++# creating and moving files from /tmp can sometimes cause problems. ++# Hook for its removal unless debugging. ++# Note that there is a small window in which the directory will not be cleaned: ++# after its creation but before its name has been assigned to `$tmp'. ++$debug || ++{ ++ tmp= ++ trap 'exit_status=$? ++ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ++' 0 ++ trap '{ (exit 1); exit 1; }' 1 2 13 15 ++} ++# Create a (secure) tmp directory for tmp files. ++ ++{ ++ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && ++ test -n "$tmp" && test -d "$tmp" ++} || ++{ ++ tmp=./conf$$-$RANDOM ++ (umask 077 && mkdir "$tmp") ++} || ++{ ++ echo "$me: cannot create a temporary directory in ." >&2 ++ { (exit 1); exit 1; } ++} ++ ++# ++# Set up the sed scripts for CONFIG_FILES section. ++# ++ ++# No need to generate the scripts if there are no CONFIG_FILES. ++# This happens for instance when ./config.status config.h ++if test -n "$CONFIG_FILES"; then ++ ++_ACEOF ++ ++ ++ ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ cat >conf$$subs.sed <<_ACEOF ++SHELL!$SHELL$ac_delim ++PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim ++PACKAGE_NAME!$PACKAGE_NAME$ac_delim ++PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim ++PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim ++PACKAGE_STRING!$PACKAGE_STRING$ac_delim ++PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim ++exec_prefix!$exec_prefix$ac_delim ++prefix!$prefix$ac_delim ++program_transform_name!$program_transform_name$ac_delim ++bindir!$bindir$ac_delim ++sbindir!$sbindir$ac_delim ++libexecdir!$libexecdir$ac_delim ++datarootdir!$datarootdir$ac_delim ++datadir!$datadir$ac_delim ++sysconfdir!$sysconfdir$ac_delim ++sharedstatedir!$sharedstatedir$ac_delim ++localstatedir!$localstatedir$ac_delim ++includedir!$includedir$ac_delim ++oldincludedir!$oldincludedir$ac_delim ++docdir!$docdir$ac_delim ++infodir!$infodir$ac_delim ++htmldir!$htmldir$ac_delim ++dvidir!$dvidir$ac_delim ++pdfdir!$pdfdir$ac_delim ++psdir!$psdir$ac_delim ++libdir!$libdir$ac_delim ++localedir!$localedir$ac_delim ++mandir!$mandir$ac_delim ++DEFS!$DEFS$ac_delim ++ECHO_C!$ECHO_C$ac_delim ++ECHO_N!$ECHO_N$ac_delim ++ECHO_T!$ECHO_T$ac_delim ++LIBS!$LIBS$ac_delim ++build_alias!$build_alias$ac_delim ++host_alias!$host_alias$ac_delim ++target_alias!$target_alias$ac_delim ++INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim ++INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim ++INSTALL_DATA!$INSTALL_DATA$ac_delim ++CYGPATH_W!$CYGPATH_W$ac_delim ++PACKAGE!$PACKAGE$ac_delim ++VERSION!$VERSION$ac_delim ++ACLOCAL!$ACLOCAL$ac_delim ++AUTOCONF!$AUTOCONF$ac_delim ++AUTOMAKE!$AUTOMAKE$ac_delim ++AUTOHEADER!$AUTOHEADER$ac_delim ++MAKEINFO!$MAKEINFO$ac_delim ++install_sh!$install_sh$ac_delim ++STRIP!$STRIP$ac_delim ++INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim ++mkdir_p!$mkdir_p$ac_delim ++AWK!$AWK$ac_delim ++SET_MAKE!$SET_MAKE$ac_delim ++am__leading_dot!$am__leading_dot$ac_delim ++AMTAR!$AMTAR$ac_delim ++am__tar!$am__tar$ac_delim ++am__untar!$am__untar$ac_delim ++CC!$CC$ac_delim ++CFLAGS!$CFLAGS$ac_delim ++LDFLAGS!$LDFLAGS$ac_delim ++CPPFLAGS!$CPPFLAGS$ac_delim ++ac_ct_CC!$ac_ct_CC$ac_delim ++EXEEXT!$EXEEXT$ac_delim ++OBJEXT!$OBJEXT$ac_delim ++DEPDIR!$DEPDIR$ac_delim ++am__include!$am__include$ac_delim ++am__quote!$am__quote$ac_delim ++AMDEP_TRUE!$AMDEP_TRUE$ac_delim ++AMDEP_FALSE!$AMDEP_FALSE$ac_delim ++AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim ++CCDEPMODE!$CCDEPMODE$ac_delim ++am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim ++am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim ++LIBTOOL!$LIBTOOL$ac_delim ++build!$build$ac_delim ++build_cpu!$build_cpu$ac_delim ++build_vendor!$build_vendor$ac_delim ++build_os!$build_os$ac_delim ++host!$host$ac_delim ++host_cpu!$host_cpu$ac_delim ++host_vendor!$host_vendor$ac_delim ++host_os!$host_os$ac_delim ++SED!$SED$ac_delim ++GREP!$GREP$ac_delim ++EGREP!$EGREP$ac_delim ++FGREP!$FGREP$ac_delim ++LD!$LD$ac_delim ++DUMPBIN!$DUMPBIN$ac_delim ++ac_ct_DUMPBIN!$ac_ct_DUMPBIN$ac_delim ++NM!$NM$ac_delim ++LN_S!$LN_S$ac_delim ++AR!$AR$ac_delim ++RANLIB!$RANLIB$ac_delim ++lt_ECHO!$lt_ECHO$ac_delim ++DSYMUTIL!$DSYMUTIL$ac_delim ++NMEDIT!$NMEDIT$ac_delim ++_ACEOF ++ ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then ++ break ++ elif $ac_last_try; then ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " ++ fi ++done ++ ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` ++if test -n "$ac_eof"; then ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ++ ac_eof=`expr $ac_eof + 1` ++fi ++ ++cat >>$CONFIG_STATUS <<_ACEOF ++cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b ++_ACEOF ++sed ' ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g ++s/^/s,@/; s/!/@,|#_!!_#|/ ++:n ++t n ++s/'"$ac_delim"'$/,g/; t ++s/$/\\/; p ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ++' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF ++CEOF$ac_eof ++_ACEOF ++ ++ ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ cat >conf$$subs.sed <<_ACEOF ++LIPO!$LIPO$ac_delim ++OTOOL!$OTOOL$ac_delim ++OTOOL64!$OTOOL64$ac_delim ++CPP!$CPP$ac_delim ++INTLTOOL_DESKTOP_RULE!$INTLTOOL_DESKTOP_RULE$ac_delim ++INTLTOOL_DIRECTORY_RULE!$INTLTOOL_DIRECTORY_RULE$ac_delim ++INTLTOOL_KEYS_RULE!$INTLTOOL_KEYS_RULE$ac_delim ++INTLTOOL_PROP_RULE!$INTLTOOL_PROP_RULE$ac_delim ++INTLTOOL_OAF_RULE!$INTLTOOL_OAF_RULE$ac_delim ++INTLTOOL_PONG_RULE!$INTLTOOL_PONG_RULE$ac_delim ++INTLTOOL_SERVER_RULE!$INTLTOOL_SERVER_RULE$ac_delim ++INTLTOOL_SHEET_RULE!$INTLTOOL_SHEET_RULE$ac_delim ++INTLTOOL_SOUNDLIST_RULE!$INTLTOOL_SOUNDLIST_RULE$ac_delim ++INTLTOOL_UI_RULE!$INTLTOOL_UI_RULE$ac_delim ++INTLTOOL_XAM_RULE!$INTLTOOL_XAM_RULE$ac_delim ++INTLTOOL_KBD_RULE!$INTLTOOL_KBD_RULE$ac_delim ++INTLTOOL_XML_RULE!$INTLTOOL_XML_RULE$ac_delim ++INTLTOOL_XML_NOMERGE_RULE!$INTLTOOL_XML_NOMERGE_RULE$ac_delim ++INTLTOOL_CAVES_RULE!$INTLTOOL_CAVES_RULE$ac_delim ++INTLTOOL_SCHEMAS_RULE!$INTLTOOL_SCHEMAS_RULE$ac_delim ++INTLTOOL_THEME_RULE!$INTLTOOL_THEME_RULE$ac_delim ++INTLTOOL_SERVICE_RULE!$INTLTOOL_SERVICE_RULE$ac_delim ++INTLTOOL_POLICY_RULE!$INTLTOOL_POLICY_RULE$ac_delim ++XGETTEXT!$XGETTEXT$ac_delim ++MSGMERGE!$MSGMERGE$ac_delim ++MSGFMT!$MSGFMT$ac_delim ++INTLTOOL_EXTRACT!$INTLTOOL_EXTRACT$ac_delim ++INTLTOOL_MERGE!$INTLTOOL_MERGE$ac_delim ++INTLTOOL_UPDATE!$INTLTOOL_UPDATE$ac_delim ++INTLTOOL_PERL!$INTLTOOL_PERL$ac_delim ++ALL_LINGUAS!$ALL_LINGUAS$ac_delim ++DATADIRNAME!$DATADIRNAME$ac_delim ++WARN_CFLAGS!$WARN_CFLAGS$ac_delim ++PKG_CONFIG!$PKG_CONFIG$ac_delim ++HELP_DIR!$HELP_DIR$ac_delim ++OMF_DIR!$OMF_DIR$ac_delim ++DOC_USER_FORMATS!$DOC_USER_FORMATS$ac_delim ++ENABLE_SK_TRUE!$ENABLE_SK_TRUE$ac_delim ++ENABLE_SK_FALSE!$ENABLE_SK_FALSE$ac_delim ++DISTCHECK_CONFIGURE_FLAGS!$DISTCHECK_CONFIGURE_FLAGS$ac_delim ++HAVE_GNOME_DOC_UTILS_TRUE!$HAVE_GNOME_DOC_UTILS_TRUE$ac_delim ++HAVE_GNOME_DOC_UTILS_FALSE!$HAVE_GNOME_DOC_UTILS_FALSE$ac_delim ++GLIB_GENMARSHAL!$GLIB_GENMARSHAL$ac_delim ++GETTEXT_PACKAGE!$GETTEXT_PACKAGE$ac_delim ++USE_NLS!$USE_NLS$ac_delim ++MSGFMT_OPTS!$MSGFMT_OPTS$ac_delim ++GMSGFMT!$GMSGFMT$ac_delim ++CATALOGS!$CATALOGS$ac_delim ++CATOBJEXT!$CATOBJEXT$ac_delim ++GMOFILES!$GMOFILES$ac_delim ++INSTOBJEXT!$INSTOBJEXT$ac_delim ++INTLLIBS!$INTLLIBS$ac_delim ++PO_IN_DATADIR_TRUE!$PO_IN_DATADIR_TRUE$ac_delim ++PO_IN_DATADIR_FALSE!$PO_IN_DATADIR_FALSE$ac_delim ++POFILES!$POFILES$ac_delim ++POSUB!$POSUB$ac_delim ++MKINSTALLDIRS!$MKINSTALLDIRS$ac_delim ++GLIB_REQUIRED!$GLIB_REQUIRED$ac_delim ++GTK_REQUIRED!$GTK_REQUIRED$ac_delim ++GDK_REQUIRED!$GDK_REQUIRED$ac_delim ++LIBGNOME_REQUIRED!$LIBGNOME_REQUIRED$ac_delim ++LIBGNOMEUI_REQUIRED!$LIBGNOMEUI_REQUIRED$ac_delim ++HAL_REQUIRED!$HAL_REQUIRED$ac_delim ++DBUS_REQUIRED!$DBUS_REQUIRED$ac_delim ++LIBGLADE_REQUIRED!$LIBGLADE_REQUIRED$ac_delim ++LIBNOTIFY_REQUIRED!$LIBNOTIFY_REQUIRED$ac_delim ++LIBWNCK_REQUIRED!$LIBWNCK_REQUIRED$ac_delim ++CAIRO_REQUIRED!$CAIRO_REQUIRED$ac_delim ++UNIQUE_REQUIRED!$UNIQUE_REQUIRED$ac_delim ++LIBPANEL_REQUIRED!$LIBPANEL_REQUIRED$ac_delim ++GSTREAMER_REQUIRED!$GSTREAMER_REQUIRED$ac_delim ++XRANDR_REQUIRED!$XRANDR_REQUIRED$ac_delim ++POLKIT_GNOME_REQUIRED!$POLKIT_GNOME_REQUIRED$ac_delim ++GLIB_CFLAGS!$GLIB_CFLAGS$ac_delim ++GLIB_LIBS!$GLIB_LIBS$ac_delim ++HAL_CFLAGS!$HAL_CFLAGS$ac_delim ++HAL_LIBS!$HAL_LIBS$ac_delim ++GSTREAMER_CFLAGS!$GSTREAMER_CFLAGS$ac_delim ++GSTREAMER_LIBS!$GSTREAMER_LIBS$ac_delim ++DBUS_CFLAGS!$DBUS_CFLAGS$ac_delim ++DBUS_LIBS!$DBUS_LIBS$ac_delim ++GNOME_CFLAGS!$GNOME_CFLAGS$ac_delim ++GNOME_LIBS!$GNOME_LIBS$ac_delim ++GDK_CFLAGS!$GDK_CFLAGS$ac_delim ++GDK_LIBS!$GDK_LIBS$ac_delim ++XRANDR_CFLAGS!$XRANDR_CFLAGS$ac_delim ++XRANDR_LIBS!$XRANDR_LIBS$ac_delim ++GCONFTOOL!$GCONFTOOL$ac_delim ++GCONF_SCHEMA_CONFIG_SOURCE!$GCONF_SCHEMA_CONFIG_SOURCE$ac_delim ++GCONF_SCHEMA_FILE_DIR!$GCONF_SCHEMA_FILE_DIR$ac_delim ++GCONF_SCHEMAS_INSTALL_TRUE!$GCONF_SCHEMAS_INSTALL_TRUE$ac_delim ++GCONF_SCHEMAS_INSTALL_FALSE!$GCONF_SCHEMAS_INSTALL_FALSE$ac_delim ++XMKMF!$XMKMF$ac_delim ++X_CFLAGS!$X_CFLAGS$ac_delim ++X_PRE_LIBS!$X_PRE_LIBS$ac_delim ++X_LIBS!$X_LIBS$ac_delim ++X_EXTRA_LIBS!$X_EXTRA_LIBS$ac_delim ++_ACEOF ++ ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then ++ break ++ elif $ac_last_try; then ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " ++ fi ++done ++ ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` ++if test -n "$ac_eof"; then ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ++ ac_eof=`expr $ac_eof + 1` ++fi ++ ++cat >>$CONFIG_STATUS <<_ACEOF ++cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b ++_ACEOF ++sed ' ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g ++s/^/s,@/; s/!/@,|#_!!_#|/ ++:n ++t n ++s/'"$ac_delim"'$/,g/; t ++s/$/\\/; p ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ++' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF ++CEOF$ac_eof ++_ACEOF ++ ++ ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ cat >conf$$subs.sed <<_ACEOF ++SYSCONFDIR!$SYSCONFDIR$ac_delim ++DATADIR!$DATADIR$ac_delim ++BINDIR!$BINDIR$ac_delim ++SBINDIR!$SBINDIR$ac_delim ++DOCDIR!$DOCDIR$ac_delim ++POLKIT_CFLAGS!$POLKIT_CFLAGS$ac_delim ++POLKIT_LIBS!$POLKIT_LIBS$ac_delim ++HAVE_TESTS_TRUE!$HAVE_TESTS_TRUE$ac_delim ++HAVE_TESTS_FALSE!$HAVE_TESTS_FALSE$ac_delim ++POLKIT_GNOME_CFLAGS!$POLKIT_GNOME_CFLAGS$ac_delim ++POLKIT_GNOME_LIBS!$POLKIT_GNOME_LIBS$ac_delim ++HAVE_GCONF_DEFAULTS_TRUE!$HAVE_GCONF_DEFAULTS_TRUE$ac_delim ++HAVE_GCONF_DEFAULTS_FALSE!$HAVE_GCONF_DEFAULTS_FALSE$ac_delim ++HAVE_APPLETS_TRUE!$HAVE_APPLETS_TRUE$ac_delim ++HAVE_APPLETS_FALSE!$HAVE_APPLETS_FALSE$ac_delim ++XMLTO!$XMLTO$ac_delim ++DOCBOOK_DOCS_ENABLED_TRUE!$DOCBOOK_DOCS_ENABLED_TRUE$ac_delim ++DOCBOOK_DOCS_ENABLED_FALSE!$DOCBOOK_DOCS_ENABLED_FALSE$ac_delim ++DBUS_SERVICES_DIR!$DBUS_SERVICES_DIR$ac_delim ++LIBNOTIFY_CFLAGS!$LIBNOTIFY_CFLAGS$ac_delim ++LIBNOTIFY_LIBS!$LIBNOTIFY_LIBS$ac_delim ++HAVE_LIBNOTIFY_TRUE!$HAVE_LIBNOTIFY_TRUE$ac_delim ++HAVE_LIBNOTIFY_FALSE!$HAVE_LIBNOTIFY_FALSE$ac_delim ++UNIQUE_CFLAGS!$UNIQUE_CFLAGS$ac_delim ++UNIQUE_LIBS!$UNIQUE_LIBS$ac_delim ++HAVE_UNIQUE_TRUE!$HAVE_UNIQUE_TRUE$ac_delim ++HAVE_UNIQUE_FALSE!$HAVE_UNIQUE_FALSE$ac_delim ++GPM_EXTRA_LIBS!$GPM_EXTRA_LIBS$ac_delim ++DOCBOOK2MAN!$DOCBOOK2MAN$ac_delim ++HAVE_DOCBOOK2MAN_TRUE!$HAVE_DOCBOOK2MAN_TRUE$ac_delim ++HAVE_DOCBOOK2MAN_FALSE!$HAVE_DOCBOOK2MAN_FALSE$ac_delim ++LIB@&t@OBJS!$LIB@&t@OBJS$ac_delim ++LTLIBOBJS!$LTLIBOBJS$ac_delim ++_ACEOF ++ ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 33; then ++ break ++ elif $ac_last_try; then ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " ++ fi ++done ++ ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` ++if test -n "$ac_eof"; then ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ++ ac_eof=`expr $ac_eof + 1` ++fi ++ ++cat >>$CONFIG_STATUS <<_ACEOF ++cat >"\$tmp/subs-3.sed" <<\CEOF$ac_eof ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end ++_ACEOF ++sed ' ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g ++s/^/s,@/; s/!/@,|#_!!_#|/ ++:n ++t n ++s/'"$ac_delim"'$/,g/; t ++s/$/\\/; p ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ++' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF ++:end ++s/|#_!!_#|//g ++CEOF$ac_eof ++_ACEOF ++ ++ ++# VPATH may cause trouble with some makes, so we remove $(srcdir), ++# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and ++# trailing colons and then remove the whole line if VPATH becomes empty ++# (actually we leave an empty line to preserve line numbers). ++if test "x$srcdir" = x.; then ++ ac_vpsub='/^[ ]*VPATH[ ]*=/{ ++s/:*\$(srcdir):*/:/ ++s/:*\${srcdir}:*/:/ ++s/:*@srcdir@:*/:/ ++s/^\([^=]*=[ ]*\):*/\1/ ++s/:*$// ++s/^[^=]*=[ ]*$// ++}' ++fi ++ ++cat >>$CONFIG_STATUS <<\_ACEOF ++fi # test -n "$CONFIG_FILES" ++ ++ ++for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS ++do ++ case $ac_tag in ++ :[FHLC]) ac_mode=$ac_tag; continue;; ++ esac ++ case $ac_mode$ac_tag in ++ :[FHL]*:*);; ++ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 ++echo "$as_me: error: Invalid tag $ac_tag." >&2;} ++ { (exit 1); exit 1; }; };; ++ :[FH]-) ac_tag=-:-;; ++ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; ++ esac ++ ac_save_IFS=$IFS ++ IFS=: ++ set x $ac_tag ++ IFS=$ac_save_IFS ++ shift ++ ac_file=$1 ++ shift ++ ++ case $ac_mode in ++ :L) ac_source=$1;; ++ :[FH]) ++ ac_file_inputs= ++ for ac_f ++ do ++ case $ac_f in ++ -) ac_f="$tmp/stdin";; ++ *) # Look for the file first in the build tree, then in the source tree ++ # (if the path is not absolute). The absolute path cannot be DOS-style, ++ # because $ac_f cannot contain `:'. ++ test -f "$ac_f" || ++ case $ac_f in ++ [\\/$]*) false;; ++ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; ++ esac || ++ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 ++echo "$as_me: error: cannot find input file: $ac_f" >&2;} ++ { (exit 1); exit 1; }; };; ++ esac ++ ac_file_inputs="$ac_file_inputs $ac_f" ++ done ++ ++ # Let's still pretend it is `configure' which instantiates (i.e., don't ++ # use $as_me), people would be surprised to read: ++ # /* config.h. Generated by config.status. */ ++ configure_input="Generated from "`IFS=: ++ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." ++ if test x"$ac_file" != x-; then ++ configure_input="$ac_file. $configure_input" ++ { echo "$as_me:$LINENO: creating $ac_file" >&5 ++echo "$as_me: creating $ac_file" >&6;} ++ fi ++ ++ case $ac_tag in ++ *:-:* | *:-) cat >"$tmp/stdin";; ++ esac ++ ;; ++ esac ++ ++ ac_dir=`$as_dirname -- "$ac_file" || ++$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$ac_file" : 'X\(//\)[^/]' \| \ ++ X"$ac_file" : 'X\(//\)$' \| \ ++ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$ac_file" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ { as_dir="$ac_dir" ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { ++ as_dirs= ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || ++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$as_dir" : 'X\(//\)[^/]' \| \ ++ X"$as_dir" : 'X\(//\)$' \| \ ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$as_dir" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break ++ done ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 ++echo "$as_me: error: cannot create directory $as_dir" >&2;} ++ { (exit 1); exit 1; }; }; } ++ ac_builddir=. ++ ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) ++ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; ++esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix ++ ++case $srcdir in ++ .) # We are building in place. ++ ac_srcdir=. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. ++ ac_srcdir=$srcdir$ac_dir_suffix; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; ++esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix ++ ++ ++ case $ac_mode in ++ :F) ++ # ++ # CONFIG_FILE ++ # ++ ++ case $INSTALL in ++ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; ++ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; ++ esac ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF ++# If the template does not know about datarootdir, expand it. ++# FIXME: This hack should be removed a few years after 2.60. ++ac_datarootdir_hack=; ac_datarootdir_seen= ++ ++case `sed -n '/datarootdir/ { ++ p ++ q ++} ++/@datadir@/p ++/@docdir@/p ++/@infodir@/p ++/@localedir@/p ++/@mandir@/p ++' $ac_file_inputs` in ++*datarootdir*) ac_datarootdir_seen=yes;; ++*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) ++ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 ++echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF ++ ac_datarootdir_hack=' ++ s&@datadir@&$datadir&g ++ s&@docdir@&$docdir&g ++ s&@infodir@&$infodir&g ++ s&@localedir@&$localedir&g ++ s&@mandir@&$mandir&g ++ s&\\\${datarootdir}&$datarootdir&g' ;; ++esac ++_ACEOF ++ ++# Neutralize VPATH when `$srcdir' = `.'. ++# Shell code in configure.ac might set extrasub. ++# FIXME: do we really want to maintain this feature? ++cat >>$CONFIG_STATUS <<_ACEOF ++ sed "$ac_vpsub ++$extrasub ++_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF ++:t ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b ++s&@configure_input@&$configure_input&;t t ++s&@top_builddir@&$ac_top_builddir_sub&;t t ++s&@srcdir@&$ac_srcdir&;t t ++s&@abs_srcdir@&$ac_abs_srcdir&;t t ++s&@top_srcdir@&$ac_top_srcdir&;t t ++s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t ++s&@builddir@&$ac_builddir&;t t ++s&@abs_builddir@&$ac_abs_builddir&;t t ++s&@abs_top_builddir@&$ac_abs_top_builddir&;t t ++s&@INSTALL@&$ac_INSTALL&;t t ++$ac_datarootdir_hack ++" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" | sed -f "$tmp/subs-3.sed" >$tmp/out ++ ++test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && ++ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && ++ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && ++ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined." >&5 ++echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined." >&2;} ++ ++ rm -f "$tmp/stdin" ++ case $ac_file in ++ -) cat "$tmp/out"; rm -f "$tmp/out";; ++ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; ++ esac ++ ;; ++ :H) ++ # ++ # CONFIG_HEADER ++ # ++_ACEOF ++ ++# Transform confdefs.h into a sed script `conftest.defines', that ++# substitutes the proper values into config.h.in to produce config.h. ++rm -f conftest.defines conftest.tail ++# First, append a space to every undef/define line, to ease matching. ++echo 's/$/ /' >conftest.defines ++# Then, protect against being on the right side of a sed subst, or in ++# an unquoted here document, in config.status. If some macros were ++# called several times there might be several #defines for the same ++# symbol, which is useless. But do not sort them, since the last ++# AC_DEFINE must be honored. ++ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* ++# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where ++# NAME is the cpp macro being defined, VALUE is the value it is being given. ++# PARAMS is the parameter list in the macro definition--in most cases, it's ++# just an empty string. ++ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*' ++ac_dB='\\)[ (].*,\\1define\\2' ++ac_dC=' ' ++ac_dD=' ,' ++ ++uniq confdefs.h | ++ sed -n ' ++ t rset ++ :rset ++ s/^[ ]*#[ ]*define[ ][ ]*// ++ t ok ++ d ++ :ok ++ s/[\\&,]/\\&/g ++ s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p ++ s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p ++ ' >>conftest.defines ++ ++# Remove the space that was appended to ease matching. ++# Then replace #undef with comments. This is necessary, for ++# example, in the case of _POSIX_SOURCE, which is predefined and required ++# on some systems where configure will not decide to define it. ++# (The regexp can be short, since the line contains either #define or #undef.) ++echo 's/ $// ++s,^[ #]*u.*,/* & */,' >>conftest.defines ++ ++# Break up conftest.defines: ++ac_max_sed_lines=50 ++ ++# First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1" ++# Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2" ++# Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1" ++# et cetera. ++ac_in='$ac_file_inputs' ++ac_out='"$tmp/out1"' ++ac_nxt='"$tmp/out2"' ++ ++while : ++do ++ # Write a here document: ++ cat >>$CONFIG_STATUS <<_ACEOF ++ # First, check the format of the line: ++ cat >"\$tmp/defines.sed" <<\\CEOF ++/^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def ++/^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def ++b ++:def ++_ACEOF ++ sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS ++ echo 'CEOF ++ sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS ++ ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in ++ sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail ++ grep . conftest.tail >/dev/null || break ++ rm -f conftest.defines ++ mv conftest.tail conftest.defines ++done ++rm -f conftest.defines conftest.tail ++ ++echo "ac_result=$ac_in" >>$CONFIG_STATUS ++cat >>$CONFIG_STATUS <<\_ACEOF ++ if test x"$ac_file" != x-; then ++ echo "/* $configure_input */" >"$tmp/config.h" ++ cat "$ac_result" >>"$tmp/config.h" ++ if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then ++ { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 ++echo "$as_me: $ac_file is unchanged" >&6;} ++ else ++ rm -f $ac_file ++ mv "$tmp/config.h" $ac_file ++ fi ++ else ++ echo "/* $configure_input */" ++ cat "$ac_result" ++ fi ++ rm -f "$tmp/out12" ++# Compute $ac_file's index in $config_headers. ++_am_stamp_count=1 ++for _am_header in $config_headers :; do ++ case $_am_header in ++ $ac_file | $ac_file:* ) ++ break ;; ++ * ) ++ _am_stamp_count=`expr $_am_stamp_count + 1` ;; ++ esac ++done ++echo "timestamp for $ac_file" >`$as_dirname -- $ac_file || ++$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X$ac_file : 'X\(//\)[^/]' \| \ ++ X$ac_file : 'X\(//\)$' \| \ ++ X$ac_file : 'X\(/\)' \| . 2>/dev/null || ++echo X$ac_file | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'`/stamp-h$_am_stamp_count ++ ;; ++ ++ :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5 ++echo "$as_me: executing $ac_file commands" >&6;} ++ ;; ++ esac ++ ++ ++ case $ac_file$ac_mode in ++ "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do ++ # Strip MF so we end up with the name of the file. ++ mf=`echo "$mf" | sed -e 's/:.*$//'` ++ # Check whether this is an Automake generated Makefile or not. ++ # We used to match only the files named `Makefile.in', but ++ # some people rename them; so instead we look at the file content. ++ # Grep'ing the first line is not enough: some people post-process ++ # each Makefile.in and add a new line on top of each file to say so. ++ # So let's grep whole file. ++ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then ++ dirpart=`$as_dirname -- "$mf" || ++$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$mf" : 'X\(//\)[^/]' \| \ ++ X"$mf" : 'X\(//\)$' \| \ ++ X"$mf" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$mf" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ else ++ continue ++ fi ++ # Extract the definition of DEPDIR, am__include, and am__quote ++ # from the Makefile without running `make'. ++ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` ++ test -z "$DEPDIR" && continue ++ am__include=`sed -n 's/^am__include = //p' < "$mf"` ++ test -z "am__include" && continue ++ am__quote=`sed -n 's/^am__quote = //p' < "$mf"` ++ # When using ansi2knr, U may be empty or an underscore; expand it ++ U=`sed -n 's/^U = //p' < "$mf"` ++ # Find all dependency output files, they are included files with ++ # $(DEPDIR) in their names. We invoke sed twice because it is the ++ # simplest approach to changing $(DEPDIR) to its actual value in the ++ # expansion. ++ for file in `sed -n " ++ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ ++ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do ++ # Make sure the directory exists. ++ test -f "$dirpart/$file" && continue ++ fdir=`$as_dirname -- "$file" || ++$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$file" : 'X\(//\)[^/]' \| \ ++ X"$file" : 'X\(//\)$' \| \ ++ X"$file" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$file" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ { as_dir=$dirpart/$fdir ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { ++ as_dirs= ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || ++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$as_dir" : 'X\(//\)[^/]' \| \ ++ X"$as_dir" : 'X\(//\)$' \| \ ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$as_dir" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break ++ done ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 ++echo "$as_me: error: cannot create directory $as_dir" >&2;} ++ { (exit 1); exit 1; }; }; } ++ # echo "creating $dirpart/$file" ++ echo '# dummy' > "$dirpart/$file" ++ done ++done ++ ;; ++ "libtool":C) ++ ++ # See if we are running on zsh, and set the options which allow our ++ # commands through without removal of \ escapes. ++ if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++ fi ++ ++ cfgfile="${ofile}T" ++ trap "$RM \"$cfgfile\"; exit 1" 1 2 15 ++ $RM "$cfgfile" ++ ++ cat <<_LT_EOF >> "$cfgfile" ++#! $SHELL ++ ++# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. ++# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION ++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: ++# NOTE: Changes made to this file will be lost: look at ltmain.sh. ++# ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, ++# 2006, 2007, 2008 Free Software Foundation, Inc. ++# Written by Gordon Matzigkeit, 1996 ++# ++# This file is part of GNU Libtool. ++# ++# GNU Libtool is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# As a special exception to the GNU General Public License, ++# if you distribute this file as part of a program or library that ++# is built using GNU Libtool, you may include this file under the ++# same distribution terms that you use for the rest of that program. ++# ++# GNU Libtool is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with GNU Libtool; see the file COPYING. If not, a copy ++# can be downloaded from http://www.gnu.org/licenses/gpl.html, or ++# obtained by writing to the Free Software Foundation, Inc., ++# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ ++ ++# The names of the tagged configurations supported by this script. ++available_tags="" ++ ++# ### BEGIN LIBTOOL CONFIG ++ ++# Which release of libtool.m4 was used? ++macro_version=$macro_version ++macro_revision=$macro_revision ++ ++# Whether or not to build shared libraries. ++build_libtool_libs=$enable_shared ++ ++# Whether or not to build static libraries. ++build_old_libs=$enable_static ++ ++# What type of objects to build. ++pic_mode=$pic_mode ++ ++# Whether or not to optimize for fast installation. ++fast_install=$enable_fast_install ++ ++# The host system. ++host_alias=$host_alias ++host=$host ++host_os=$host_os ++ ++# The build system. ++build_alias=$build_alias ++build=$build ++build_os=$build_os ++ ++# A sed program that does not truncate output. ++SED=$lt_SED ++ ++# Sed that helps us avoid accidentally triggering echo(1) options like -n. ++Xsed="\$SED -e 1s/^X//" ++ ++# A grep program that handles long lines. ++GREP=$lt_GREP ++ ++# An ERE matcher. ++EGREP=$lt_EGREP ++ ++# A literal string matcher. ++FGREP=$lt_FGREP ++ ++# A BSD- or MS-compatible name lister. ++NM=$lt_NM ++ ++# Whether we need soft or hard links. ++LN_S=$lt_LN_S ++ ++# What is the maximum length of a command? ++max_cmd_len=$max_cmd_len ++ ++# Object file suffix (normally "o"). ++objext=$ac_objext ++ ++# Executable file suffix (normally ""). ++exeext=$exeext ++ ++# whether the shell understands "unset". ++lt_unset=$lt_unset ++ ++# turn spaces into newlines. ++SP2NL=$lt_lt_SP2NL ++ ++# turn newlines into spaces. ++NL2SP=$lt_lt_NL2SP ++ ++# How to create reloadable object files. ++reload_flag=$lt_reload_flag ++reload_cmds=$lt_reload_cmds ++ ++# Method to check whether dependent libraries are shared objects. ++deplibs_check_method=$lt_deplibs_check_method ++ ++# Command to use when deplibs_check_method == "file_magic". ++file_magic_cmd=$lt_file_magic_cmd ++ ++# The archiver. ++AR=$lt_AR ++AR_FLAGS=$lt_AR_FLAGS ++ ++# A symbol stripping program. ++STRIP=$lt_STRIP ++ ++# Commands used to install an old-style archive. ++RANLIB=$lt_RANLIB ++old_postinstall_cmds=$lt_old_postinstall_cmds ++old_postuninstall_cmds=$lt_old_postuninstall_cmds ++ ++# A C compiler. ++LTCC=$lt_CC ++ ++# LTCC compiler flags. ++LTCFLAGS=$lt_CFLAGS ++ ++# Take the output of nm and produce a listing of raw symbols and C names. ++global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe ++ ++# Transform the output of nm in a proper C declaration. ++global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl ++ ++# Transform the output of nm in a C name address pair. ++global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address ++ ++# Transform the output of nm in a C name address pair when lib prefix is needed. ++global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix ++ ++# The name of the directory that contains temporary libtool files. ++objdir=$objdir ++ ++# Shell to use when invoking shell scripts. ++SHELL=$lt_SHELL ++ ++# An echo program that does not interpret backslashes. ++ECHO=$lt_ECHO ++ ++# Used to examine libraries when file_magic_cmd begins with "file". ++MAGIC_CMD=$MAGIC_CMD ++ ++# Must we lock files when doing compilation? ++need_locks=$lt_need_locks ++ ++# Tool to manipulate archived DWARF debug symbol files on Mac OS X. ++DSYMUTIL=$lt_DSYMUTIL ++ ++# Tool to change global to local symbols on Mac OS X. ++NMEDIT=$lt_NMEDIT ++ ++# Tool to manipulate fat objects and archives on Mac OS X. ++LIPO=$lt_LIPO ++ ++# ldd/readelf like tool for Mach-O binaries on Mac OS X. ++OTOOL=$lt_OTOOL ++ ++# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. ++OTOOL64=$lt_OTOOL64 ++ ++# Old archive suffix (normally "a"). ++libext=$libext ++ ++# Shared library suffix (normally ".so"). ++shrext_cmds=$lt_shrext_cmds ++ ++# The commands to extract the exported symbol list from a shared archive. ++extract_expsyms_cmds=$lt_extract_expsyms_cmds ++ ++# Variables whose values should be saved in libtool wrapper scripts and ++# restored at link time. ++variables_saved_for_relink=$lt_variables_saved_for_relink ++ ++# Do we need the "lib" prefix for modules? ++need_lib_prefix=$need_lib_prefix ++ ++# Do we need a version for libraries? ++need_version=$need_version ++ ++# Library versioning type. ++version_type=$version_type ++ ++# Shared library runtime path variable. ++runpath_var=$runpath_var ++ ++# Shared library path variable. ++shlibpath_var=$shlibpath_var ++ ++# Is shlibpath searched before the hard-coded library search path? ++shlibpath_overrides_runpath=$shlibpath_overrides_runpath ++ ++# Format of library name prefix. ++libname_spec=$lt_libname_spec ++ ++# List of archive names. First name is the real one, the rest are links. ++# The last name is the one that the linker finds with -lNAME ++library_names_spec=$lt_library_names_spec ++ ++# The coded name of the library, if different from the real name. ++soname_spec=$lt_soname_spec ++ ++# Command to use after installation of a shared archive. ++postinstall_cmds=$lt_postinstall_cmds ++ ++# Command to use after uninstallation of a shared archive. ++postuninstall_cmds=$lt_postuninstall_cmds ++ ++# Commands used to finish a libtool library installation in a directory. ++finish_cmds=$lt_finish_cmds ++ ++# As "finish_cmds", except a single script fragment to be evaled but ++# not shown. ++finish_eval=$lt_finish_eval ++ ++# Whether we should hardcode library paths into libraries. ++hardcode_into_libs=$hardcode_into_libs ++ ++# Compile-time system search path for libraries. ++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec ++ ++# Run-time system search path for libraries. ++sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec ++ ++# Whether dlopen is supported. ++dlopen_support=$enable_dlopen ++ ++# Whether dlopen of programs is supported. ++dlopen_self=$enable_dlopen_self ++ ++# Whether dlopen of statically linked programs is supported. ++dlopen_self_static=$enable_dlopen_self_static ++ ++# Commands to strip libraries. ++old_striplib=$lt_old_striplib ++striplib=$lt_striplib ++ ++ ++# The linker used to build libraries. ++LD=$lt_LD ++ ++# Commands used to build an old-style archive. ++old_archive_cmds=$lt_old_archive_cmds ++ ++# A language specific compiler. ++CC=$lt_compiler ++ ++# Is the compiler the GNU compiler? ++with_gcc=$GCC ++ ++# Compiler flag to turn off builtin functions. ++no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag ++ ++# How to pass a linker flag through the compiler. ++wl=$lt_lt_prog_compiler_wl ++ ++# Additional compiler flags for building library objects. ++pic_flag=$lt_lt_prog_compiler_pic ++ ++# Compiler flag to prevent dynamic linking. ++link_static_flag=$lt_lt_prog_compiler_static ++ ++# Does compiler simultaneously support -c and -o options? ++compiler_c_o=$lt_lt_cv_prog_compiler_c_o ++ ++# Whether or not to add -lc for building shared libraries. ++build_libtool_need_lc=$archive_cmds_need_lc ++ ++# Whether or not to disallow shared libs when runtime libs are static. ++allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes ++ ++# Compiler flag to allow reflexive dlopens. ++export_dynamic_flag_spec=$lt_export_dynamic_flag_spec ++ ++# Compiler flag to generate shared objects directly from archives. ++whole_archive_flag_spec=$lt_whole_archive_flag_spec ++ ++# Whether the compiler copes with passing no objects directly. ++compiler_needs_object=$lt_compiler_needs_object ++ ++# Create an old-style archive from a shared archive. ++old_archive_from_new_cmds=$lt_old_archive_from_new_cmds ++ ++# Create a temporary old-style archive to link instead of a shared archive. ++old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds ++ ++# Commands used to build a shared archive. ++archive_cmds=$lt_archive_cmds ++archive_expsym_cmds=$lt_archive_expsym_cmds ++ ++# Commands used to build a loadable module if different from building ++# a shared archive. ++module_cmds=$lt_module_cmds ++module_expsym_cmds=$lt_module_expsym_cmds ++ ++# Whether we are building with GNU ld or not. ++with_gnu_ld=$lt_with_gnu_ld ++ ++# Flag that allows shared libraries with undefined symbols to be built. ++allow_undefined_flag=$lt_allow_undefined_flag ++ ++# Flag that enforces no undefined symbols. ++no_undefined_flag=$lt_no_undefined_flag ++ ++# Flag to hardcode \$libdir into a binary during linking. ++# This must work even if \$libdir does not exist ++hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec ++ ++# If ld is used when linking, flag to hardcode \$libdir into a binary ++# during linking. This must work even if \$libdir does not exist. ++hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld ++ ++# Whether we need a single "-rpath" flag with a separated argument. ++hardcode_libdir_separator=$lt_hardcode_libdir_separator ++ ++# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes ++# DIR into the resulting binary. ++hardcode_direct=$hardcode_direct ++ ++# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes ++# DIR into the resulting binary and the resulting library dependency is ++# "absolute",i.e impossible to change by setting \${shlibpath_var} if the ++# library is relocated. ++hardcode_direct_absolute=$hardcode_direct_absolute ++ ++# Set to "yes" if using the -LDIR flag during linking hardcodes DIR ++# into the resulting binary. ++hardcode_minus_L=$hardcode_minus_L ++ ++# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR ++# into the resulting binary. ++hardcode_shlibpath_var=$hardcode_shlibpath_var ++ ++# Set to "yes" if building a shared library automatically hardcodes DIR ++# into the library and all subsequent libraries and executables linked ++# against it. ++hardcode_automatic=$hardcode_automatic ++ ++# Set to yes if linker adds runtime paths of dependent libraries ++# to runtime path list. ++inherit_rpath=$inherit_rpath ++ ++# Whether libtool must link a program against all its dependency libraries. ++link_all_deplibs=$link_all_deplibs ++ ++# Fix the shell variable \$srcfile for the compiler. ++fix_srcfile_path=$lt_fix_srcfile_path ++ ++# Set to "yes" if exported symbols are required. ++always_export_symbols=$always_export_symbols ++ ++# The commands to list exported symbols. ++export_symbols_cmds=$lt_export_symbols_cmds ++ ++# Symbols that should not be listed in the preloaded symbols. ++exclude_expsyms=$lt_exclude_expsyms ++ ++# Symbols that must always be exported. ++include_expsyms=$lt_include_expsyms ++ ++# Commands necessary for linking programs (against libraries) with templates. ++prelink_cmds=$lt_prelink_cmds ++ ++# Specify filename containing input files. ++file_list_spec=$lt_file_list_spec ++ ++# How to hardcode a shared library path into an executable. ++hardcode_action=$hardcode_action ++ ++# ### END LIBTOOL CONFIG ++ ++_LT_EOF ++ ++ case $host_os in ++ aix3*) ++ cat <<\_LT_EOF >> "$cfgfile" ++# AIX sometimes has problems with the GCC collect2 program. For some ++# reason, if we set the COLLECT_NAMES environment variable, the problems ++# vanish in a puff of smoke. ++if test "X${COLLECT_NAMES+set}" != Xset; then ++ COLLECT_NAMES= ++ export COLLECT_NAMES ++fi ++_LT_EOF ++ ;; ++ esac ++ ++ ++ltmain="$ac_aux_dir/ltmain.sh" ++ ++ ++ # We use sed instead of cat because bash on DJGPP gets confused if ++ # if finds mixed CR/LF and LF-only lines. Since sed operates in ++ # text mode, it properly converts lines to CR/LF. This bash problem ++ # is reportedly fixed, but why not run on old versions too? ++ sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ ++ || (rm -f "$cfgfile"; exit 1) ++ ++ case $xsi_shell in ++ yes) ++ cat << \_LT_EOF >> "$cfgfile" ++ ++# func_dirname file append nondir_replacement ++# Compute the dirname of FILE. If nonempty, add APPEND to the result, ++# otherwise set result to NONDIR_REPLACEMENT. ++func_dirname () ++{ ++ case ${1} in ++ */*) func_dirname_result="${1%/*}${2}" ;; ++ * ) func_dirname_result="${3}" ;; ++ esac ++} ++ ++# func_basename file ++func_basename () ++{ ++ func_basename_result="${1##*/}" ++} ++ ++# func_dirname_and_basename file append nondir_replacement ++# perform func_basename and func_dirname in a single function ++# call: ++# dirname: Compute the dirname of FILE. If nonempty, ++# add APPEND to the result, otherwise set result ++# to NONDIR_REPLACEMENT. ++# value returned in "$func_dirname_result" ++# basename: Compute filename of FILE. ++# value retuned in "$func_basename_result" ++# Implementation must be kept synchronized with func_dirname ++# and func_basename. For efficiency, we do not delegate to ++# those functions but instead duplicate the functionality here. ++func_dirname_and_basename () ++{ ++ case ${1} in ++ */*) func_dirname_result="${1%/*}${2}" ;; ++ * ) func_dirname_result="${3}" ;; ++ esac ++ func_basename_result="${1##*/}" ++} ++ ++# func_stripname prefix suffix name ++# strip PREFIX and SUFFIX off of NAME. ++# PREFIX and SUFFIX must not contain globbing or regex special ++# characters, hashes, percent signs, but SUFFIX may contain a leading ++# dot (in which case that matches only a dot). ++func_stripname () ++{ ++ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are ++ # positional parameters, so assign one to ordinary parameter first. ++ func_stripname_result=${3} ++ func_stripname_result=${func_stripname_result#"${1}"} ++ func_stripname_result=${func_stripname_result%"${2}"} ++} ++ ++# func_opt_split ++func_opt_split () ++{ ++ func_opt_split_opt=${1%%=*} ++ func_opt_split_arg=${1#*=} ++} ++ ++# func_lo2o object ++func_lo2o () ++{ ++ case ${1} in ++ *.lo) func_lo2o_result=${1%.lo}.${objext} ;; ++ *) func_lo2o_result=${1} ;; ++ esac ++} ++ ++# func_xform libobj-or-source ++func_xform () ++{ ++ func_xform_result=${1%.*}.lo ++} ++ ++# func_arith arithmetic-term... ++func_arith () ++{ ++ func_arith_result=$(( $* )) ++} ++ ++# func_len string ++# STRING may not start with a hyphen. ++func_len () ++{ ++ func_len_result=${#1} ++} ++ ++_LT_EOF ++ ;; ++ *) # Bourne compatible functions. ++ cat << \_LT_EOF >> "$cfgfile" ++ ++# func_dirname file append nondir_replacement ++# Compute the dirname of FILE. If nonempty, add APPEND to the result, ++# otherwise set result to NONDIR_REPLACEMENT. ++func_dirname () ++{ ++ # Extract subdirectory from the argument. ++ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` ++ if test "X$func_dirname_result" = "X${1}"; then ++ func_dirname_result="${3}" ++ else ++ func_dirname_result="$func_dirname_result${2}" ++ fi ++} ++ ++# func_basename file ++func_basename () ++{ ++ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` ++} ++ ++ ++# func_stripname prefix suffix name ++# strip PREFIX and SUFFIX off of NAME. ++# PREFIX and SUFFIX must not contain globbing or regex special ++# characters, hashes, percent signs, but SUFFIX may contain a leading ++# dot (in which case that matches only a dot). ++# func_strip_suffix prefix name ++func_stripname () ++{ ++ case ${2} in ++ .*) func_stripname_result=`$ECHO "X${3}" \ ++ | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; ++ *) func_stripname_result=`$ECHO "X${3}" \ ++ | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; ++ esac ++} ++ ++# sed scripts: ++my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q' ++my_sed_long_arg='1s/^-[^=]*=//' ++ ++# func_opt_split ++func_opt_split () ++{ ++ func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` ++ func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` ++} ++ ++# func_lo2o object ++func_lo2o () ++{ ++ func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` ++} ++ ++# func_xform libobj-or-source ++func_xform () ++{ ++ func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'` ++} ++ ++# func_arith arithmetic-term... ++func_arith () ++{ ++ func_arith_result=`expr "$@"` ++} ++ ++# func_len string ++# STRING may not start with a hyphen. ++func_len () ++{ ++ func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` ++} ++ ++_LT_EOF ++esac ++ ++case $lt_shell_append in ++ yes) ++ cat << \_LT_EOF >> "$cfgfile" ++ ++# func_append var value ++# Append VALUE to the end of shell variable VAR. ++func_append () ++{ ++ eval "$1+=\$2" ++} ++_LT_EOF ++ ;; ++ *) ++ cat << \_LT_EOF >> "$cfgfile" ++ ++# func_append var value ++# Append VALUE to the end of shell variable VAR. ++func_append () ++{ ++ eval "$1=\$$1\$2" ++} ++ ++_LT_EOF ++ ;; ++ esac ++ ++ ++ sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ ++ || (rm -f "$cfgfile"; exit 1) ++ ++ mv -f "$cfgfile" "$ofile" || ++ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") ++ chmod +x "$ofile" ++ ++ ;; ++ "intltool":C) ++ ++for file in intltool-extract intltool-merge intltool-update; do ++ sed -e "s|@INTLTOOL_EXTRACT@|`pwd`/intltool-extract|g" \ ++ -e "s|@INTLTOOL_LIBDIR@|${INTLTOOL_LIBDIR}|g" \ ++ -e "s|@INTLTOOL_PERL@|${INTLTOOL_PERL}|g" \ ++ < ${ac_aux_dir}/${file}.in > ${file}.out ++ if cmp -s ${file} ${file}.out 2>/dev/null; then ++ rm -f ${file}.out ++ else ++ mv -f ${file}.out ${file} ++ fi ++ chmod ugo+x ${file} ++ chmod u+w ${file} ++done ++ ++ ;; ++ "default-1":C) case "$CONFIG_FILES" in *po/Makefile.in*) ++ sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile ++ esac ;; ++ "po/stamp-it":C) ++ rm -f "po/stamp-it" "po/stamp-it.tmp" "po/POTFILES" "po/Makefile.tmp" ++ >"po/stamp-it.tmp" ++ sed '/^#/d ++ s/^[[].*] *// ++ /^[ ]*$/d ++ '"s|^| $ac_top_srcdir/|" \ ++ "$srcdir/po/POTFILES.in" | sed '$!s/$/ \\/' >"po/POTFILES" ++ ++ if test ! -f "po/Makefile"; then ++ { { echo "$as_me:$LINENO: error: po/Makefile is not ready." >&5 ++echo "$as_me: error: po/Makefile is not ready." >&2;} ++ { (exit 1); exit 1; }; } ++ fi ++ mv "po/Makefile" "po/Makefile.tmp" ++ sed '/^POTFILES =/,/[^\\]$/ { ++ /^POTFILES =/!d ++ r po/POTFILES ++ } ++ ' "po/Makefile.tmp" >"po/Makefile" ++ rm -f "po/Makefile.tmp" ++ mv "po/stamp-it.tmp" "po/stamp-it" ++ ;; ++ ++ esac ++done # for ac_tag ++ ++ ++{ (exit 0); exit 0; } ++_ACEOF ++chmod +x $CONFIG_STATUS ++ac_clean_files=$ac_clean_files_save ++ ++ ++# configure is writing to config.log, and then calls config.status. ++# config.status does its own redirection, appending to config.log. ++# Unfortunately, on DOS this fails, as config.log is still kept open ++# by configure, so config.status won't be able to write to it; its ++# output is simply discarded. So we exec the FD to /dev/null, ++# effectively closing config.log, so it can be properly (re)opened and ++# appended to by config.status. When coming back to configure, we ++# need to make the FD available again. ++if test "$no_create" != yes; then ++ ac_cs_success=: ++ ac_config_status_args= ++ test "$silent" = yes && ++ ac_config_status_args="$ac_config_status_args --quiet" ++ exec 5>/dev/null ++ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false ++ exec 5>>config.log ++ # Use ||, not &&, to avoid exiting from the if with $? = 1, which ++ # would make configure fail if this is the last instruction. ++ $ac_cs_success || { (exit 1); exit 1; } ++fi ++ ++ ++echo " ++ GNOME Power Manager $VERSION ++ ============================= ++ ++ prefix: ${prefix} ++ datadir: ${datadir} ++ compiler: ${CC} ++ cflags: ${CFLAGS} ++ libnotify support: ${have_libnotify} ++ unique support: ${have_unique} ++ Building extra applets: ${enable_applets} ++ DPMS support: ${have_dpms} ++ PolicyKit support: ${have_polkit} ++ XEVENTS support: ${have_xevents} ++ Self test support: ${have_tests} ++ GConf default support: ${have_gconfdefaults} ++ Docbook support: ${enable_docbook_docs} ++ documentation dir: $DOCDIR ++ dbus-1 system.d dir: $DBUS_SYS_DIR ++ dbus-1 services dir: $DBUS_SERVICES_DIR ++ gconf-schema dir: $GCONF_SCHEMA_FILE_DIR ++" ++ +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/autom4te.cache/output.2 gnome-power-manager-2.24.0.new/autom4te.cache/output.2 +--- gnome-power-manager-2.24.0/autom4te.cache/output.2 1970-01-01 01:00:00.000000000 +0100 ++++ gnome-power-manager-2.24.0.new/autom4te.cache/output.2 2008-11-20 18:37:20.000000000 +0100 +@@ -0,0 +1,19955 @@ ++@%:@! /bin/sh ++@%:@ Guess values for system-dependent variables and create Makefiles. ++@%:@ Generated by GNU Autoconf 2.61 for gnome-power-manager 2.24.0. ++@%:@ ++@%:@ Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, ++@%:@ 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. ++@%:@ This configure script is free software; the Free Software Foundation ++@%:@ gives unlimited permission to copy, distribute and modify it. ++## --------------------- ## ++## M4sh Initialization. ## ++## --------------------- ## ++ ++# Be more Bourne compatible ++DUALCASE=1; export DUALCASE # for MKS sh ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++ ++ ++# PATH needs CR ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits ++ ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ echo "#! /bin/sh" >conf$$.sh ++ echo "exit 0" >>conf$$.sh ++ chmod +x conf$$.sh ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then ++ PATH_SEPARATOR=';' ++ else ++ PATH_SEPARATOR=: ++ fi ++ rm -f conf$$.sh ++fi ++ ++# Support unset when possible. ++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then ++ as_unset=unset ++else ++ as_unset=false ++fi ++ ++ ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++as_nl=' ++' ++IFS=" "" $as_nl" ++ ++# Find who we are. Look in the path if we contain no directory separator. ++case $0 in ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 ++fi ++if test ! -f "$as_myself"; then ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ { (exit 1); exit 1; } ++fi ++ ++# Work around bugs in pre-3.0 UWIN ksh. ++for as_var in ENV MAIL MAILPATH ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++done ++PS1='$ ' ++PS2='> ' ++PS4='+ ' ++ ++# NLS nuisances. ++for as_var in \ ++ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ ++ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ ++ LC_TELEPHONE LC_TIME ++do ++ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then ++ eval $as_var=C; export $as_var ++ else ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++ fi ++done ++ ++# Required to use basename. ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then ++ as_expr=expr ++else ++ as_expr=false ++fi ++ ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then ++ as_basename=basename ++else ++ as_basename=false ++fi ++ ++ ++# Name of the executable. ++as_me=`$as_basename -- "$0" || ++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ ++ X"$0" : 'X\(//\)$' \| \ ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || ++echo X/"$0" | ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ ++# CDPATH. ++$as_unset CDPATH ++ ++ ++if test "x$CONFIG_SHELL" = x; then ++ if (eval ":") 2>/dev/null; then ++ as_have_required=yes ++else ++ as_have_required=no ++fi ++ ++ if test $as_have_required = yes && (eval ": ++(as_func_return () { ++ (exit \$1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} ++ ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. ++fi ++ ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi ++ ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi ++ ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test \$exitcode = 0) || { (exit 1); exit 1; } ++ ++( ++ as_lineno_1=\$LINENO ++ as_lineno_2=\$LINENO ++ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && ++ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } ++") 2> /dev/null; then ++ : ++else ++ as_candidate_shells= ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ case $as_dir in ++ /*) ++ for as_base in sh bash ksh sh5; do ++ as_candidate_shells="$as_candidate_shells $as_dir/$as_base" ++ done;; ++ esac ++done ++IFS=$as_save_IFS ++ ++ ++ for as_shell in $as_candidate_shells $SHELL; do ++ # Try only shells that exist, to save several forks. ++ if { test -f "$as_shell" || test -f "$as_shell.exe"; } && ++ { ("$as_shell") 2> /dev/null <<\_ASEOF ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++: ++_ASEOF ++}; then ++ CONFIG_SHELL=$as_shell ++ as_have_required=yes ++ if { "$as_shell" 2> /dev/null <<\_ASEOF ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++: ++(as_func_return () { ++ (exit $1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} ++ ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. ++fi ++ ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi ++ ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi ++ ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = "$1" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test $exitcode = 0) || { (exit 1); exit 1; } ++ ++( ++ as_lineno_1=$LINENO ++ as_lineno_2=$LINENO ++ test "x$as_lineno_1" != "x$as_lineno_2" && ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } ++ ++_ASEOF ++}; then ++ break ++fi ++ ++fi ++ ++ done ++ ++ if test "x$CONFIG_SHELL" != x; then ++ for as_var in BASH_ENV ENV ++ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++ done ++ export CONFIG_SHELL ++ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} ++fi ++ ++ ++ if test $as_have_required = no; then ++ echo This script requires a shell more modern than all the ++ echo shells that I found on your system. Please install a ++ echo modern shell, or manually run the script under such a ++ echo shell if you do have one. ++ { (exit 1); exit 1; } ++fi ++ ++ ++fi ++ ++fi ++ ++ ++ ++(eval "as_func_return () { ++ (exit \$1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} ++ ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. ++fi ++ ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi ++ ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi ++ ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test \$exitcode = 0") || { ++ echo No shell found that supports shell functions. ++ echo Please tell autoconf@gnu.org about your system, ++ echo including any error possibly output before this ++ echo message ++} ++ ++ ++ ++ as_lineno_1=$LINENO ++ as_lineno_2=$LINENO ++ test "x$as_lineno_1" != "x$as_lineno_2" && ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { ++ ++ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO ++ # uniformly replaced by the line number. The first 'sed' inserts a ++ # line-number line after each line using $LINENO; the second 'sed' ++ # does the real work. The second script uses 'N' to pair each ++ # line-number line with the line containing $LINENO, and appends ++ # trailing '-' during substitution so that $LINENO is not a special ++ # case at line end. ++ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the ++ # scripts with optimization help from Paolo Bonzini. Blame Lee ++ # E. McMahon (1931-1989) for sed's syntax. :-) ++ sed -n ' ++ p ++ /[$]LINENO/= ++ ' <$as_myself | ++ sed ' ++ s/[$]LINENO.*/&-/ ++ t lineno ++ b ++ :lineno ++ N ++ :loop ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ ++ t loop ++ s/-\n.*// ++ ' >$as_me.lineno && ++ chmod +x "$as_me.lineno" || ++ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 ++ { (exit 1); exit 1; }; } ++ ++ # Don't try to exec as it changes $[0], causing all sort of problems ++ # (the dirname of $[0] is not the place where we might find the ++ # original and so on. Autoconf is especially sensitive to this). ++ . "./$as_me.lineno" ++ # Exit status is that of the last command. ++ exit ++} ++ ++ ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false ++fi ++ ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in ++-n*) ++ case `echo 'x\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ *) ECHO_C='\c';; ++ esac;; ++*) ++ ECHO_N='-n';; ++esac ++ ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then ++ as_expr=expr ++else ++ as_expr=false ++fi ++ ++rm -f conf$$ conf$$.exe conf$$.file ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file ++else ++ rm -f conf$$.dir ++ mkdir conf$$.dir ++fi ++echo >conf$$.file ++if ln -s conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || ++ as_ln_s='cp -p' ++elif ln conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s=ln ++else ++ as_ln_s='cp -p' ++fi ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null ++ ++if mkdir -p . 2>/dev/null; then ++ as_mkdir_p=: ++else ++ test -d ./-p && rmdir ./-p ++ as_mkdir_p=false ++fi ++ ++if test -x / >/dev/null 2>&1; then ++ as_test_x='test -x' ++else ++ if ls -dL / >/dev/null 2>&1; then ++ as_ls_L_option=L ++ else ++ as_ls_L_option= ++ fi ++ as_test_x=' ++ eval sh -c '\'' ++ if test -d "$1"; then ++ test -d "$1/."; ++ else ++ case $1 in ++ -*)set "./$1";; ++ esac; ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ++ ???[sx]*):;;*)false;;esac;fi ++ '\'' sh ++ ' ++fi ++as_executable_p=$as_test_x ++ ++# Sed expression to map a string onto a valid CPP name. ++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" ++ ++# Sed expression to map a string onto a valid variable name. ++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" ++ ++ ++ ++ ++# Check that we are running under the correct shell. ++SHELL=${CONFIG_SHELL-/bin/sh} ++ ++case X$lt_ECHO in ++X*--fallback-echo) ++ # Remove one level of quotation (which was required for Make). ++ ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','` ++ ;; ++esac ++ ++ECHO=${lt_ECHO-echo} ++if test "X$1" = X--no-reexec; then ++ # Discard the --no-reexec flag, and continue. ++ shift ++elif test "X$1" = X--fallback-echo; then ++ # Avoid inline document here, it may be left over ++ : ++elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then ++ # Yippee, $ECHO works! ++ : ++else ++ # Restart under the correct shell. ++ exec $SHELL "$0" --no-reexec ${1+"$@"} ++fi ++ ++if test "X$1" = X--fallback-echo; then ++ # used as fallback echo ++ shift ++ cat <<_LT_EOF ++$* ++_LT_EOF ++ exit 0 ++fi ++ ++# The HP-UX ksh and POSIX shell print the target directory to stdout ++# if CDPATH is set. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++ ++if test -z "$lt_ECHO"; then ++ if test "X${echo_test_string+set}" != Xset; then ++ # find a string as large as possible, as long as the shell can cope with it ++ for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do ++ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... ++ if { echo_test_string=`eval $cmd`; } 2>/dev/null && ++ { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null ++ then ++ break ++ fi ++ done ++ fi ++ ++ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ : ++ else ++ # The Solaris, AIX, and Digital Unix default echo programs unquote ++ # backslashes. This makes it impossible to quote backslashes using ++ # echo "$something" | sed 's/\\/\\\\/g' ++ # ++ # So, first we look for a working echo in the user's PATH. ++ ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for dir in $PATH /usr/ucb; do ++ IFS="$lt_save_ifs" ++ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && ++ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ ECHO="$dir/echo" ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ++ if test "X$ECHO" = Xecho; then ++ # We didn't find a better echo, so look for alternatives. ++ if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ # This shell has a builtin print -r that does the trick. ++ ECHO='print -r' ++ elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && ++ test "X$CONFIG_SHELL" != X/bin/ksh; then ++ # If we have ksh, try running configure again with it. ++ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} ++ export ORIGINAL_CONFIG_SHELL ++ CONFIG_SHELL=/bin/ksh ++ export CONFIG_SHELL ++ exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} ++ else ++ # Try using printf. ++ ECHO='printf %s\n' ++ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ # Cool, printf works ++ : ++ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && ++ test "X$echo_testing_string" = 'X\t' && ++ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL ++ export CONFIG_SHELL ++ SHELL="$CONFIG_SHELL" ++ export SHELL ++ ECHO="$CONFIG_SHELL $0 --fallback-echo" ++ elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && ++ test "X$echo_testing_string" = 'X\t' && ++ echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ ECHO="$CONFIG_SHELL $0 --fallback-echo" ++ else ++ # maybe with a smaller string... ++ prev=: ++ ++ for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do ++ if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null ++ then ++ break ++ fi ++ prev="$cmd" ++ done ++ ++ if test "$prev" != 'sed 50q "$0"'; then ++ echo_test_string=`eval $prev` ++ export echo_test_string ++ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} ++ else ++ # Oops. We lost completely, so just stick with echo. ++ ECHO=echo ++ fi ++ fi ++ fi ++ fi ++ fi ++fi ++ ++# Copy echo and quote the copy suitably for passing to libtool from ++# the Makefile, instead of quoting the original, which is used later. ++lt_ECHO=$ECHO ++if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then ++ lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" ++fi ++ ++ ++ ++ ++exec 7<&0 &1 ++ ++# Name of the host. ++# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, ++# so uname gets run too. ++ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` ++ ++# ++# Initializations. ++# ++ac_default_prefix=/usr/local ++ac_clean_files= ++ac_config_libobj_dir=. ++LIB@&t@OBJS= ++cross_compiling=no ++subdirs= ++MFLAGS= ++MAKEFLAGS= ++SHELL=${CONFIG_SHELL-/bin/sh} ++ ++# Identity of this package. ++PACKAGE_NAME='gnome-power-manager' ++PACKAGE_TARNAME='gnome-power-manager' ++PACKAGE_VERSION='2.24.0' ++PACKAGE_STRING='gnome-power-manager 2.24.0' ++PACKAGE_BUGREPORT='' ++ ++ac_unique_file="src" ++# Factoring default headers for most tests. ++ac_includes_default="\ ++#include ++#ifdef HAVE_SYS_TYPES_H ++# include ++#endif ++#ifdef HAVE_SYS_STAT_H ++# include ++#endif ++#ifdef STDC_HEADERS ++# include ++# include ++#else ++# ifdef HAVE_STDLIB_H ++# include ++# endif ++#endif ++#ifdef HAVE_STRING_H ++# if !defined STDC_HEADERS && defined HAVE_MEMORY_H ++# include ++# endif ++# include ++#endif ++#ifdef HAVE_STRINGS_H ++# include ++#endif ++#ifdef HAVE_INTTYPES_H ++# include ++#endif ++#ifdef HAVE_STDINT_H ++# include ++#endif ++#ifdef HAVE_UNISTD_H ++# include ++#endif" ++ ++ac_subst_vars='SHELL ++PATH_SEPARATOR ++PACKAGE_NAME ++PACKAGE_TARNAME ++PACKAGE_VERSION ++PACKAGE_STRING ++PACKAGE_BUGREPORT ++exec_prefix ++prefix ++program_transform_name ++bindir ++sbindir ++libexecdir ++datarootdir ++datadir ++sysconfdir ++sharedstatedir ++localstatedir ++includedir ++oldincludedir ++docdir ++infodir ++htmldir ++dvidir ++pdfdir ++psdir ++libdir ++localedir ++mandir ++DEFS ++ECHO_C ++ECHO_N ++ECHO_T ++LIBS ++build_alias ++host_alias ++target_alias ++INSTALL_PROGRAM ++INSTALL_SCRIPT ++INSTALL_DATA ++CYGPATH_W ++PACKAGE ++VERSION ++ACLOCAL ++AUTOCONF ++AUTOMAKE ++AUTOHEADER ++MAKEINFO ++install_sh ++STRIP ++INSTALL_STRIP_PROGRAM ++mkdir_p ++AWK ++SET_MAKE ++am__leading_dot ++AMTAR ++am__tar ++am__untar ++CC ++CFLAGS ++LDFLAGS ++CPPFLAGS ++ac_ct_CC ++EXEEXT ++OBJEXT ++DEPDIR ++am__include ++am__quote ++AMDEP_TRUE ++AMDEP_FALSE ++AMDEPBACKSLASH ++CCDEPMODE ++am__fastdepCC_TRUE ++am__fastdepCC_FALSE ++LIBTOOL ++build ++build_cpu ++build_vendor ++build_os ++host ++host_cpu ++host_vendor ++host_os ++SED ++GREP ++EGREP ++FGREP ++LD ++DUMPBIN ++ac_ct_DUMPBIN ++NM ++LN_S ++AR ++RANLIB ++lt_ECHO ++DSYMUTIL ++NMEDIT ++LIPO ++OTOOL ++OTOOL64 ++CPP ++INTLTOOL_DESKTOP_RULE ++INTLTOOL_DIRECTORY_RULE ++INTLTOOL_KEYS_RULE ++INTLTOOL_PROP_RULE ++INTLTOOL_OAF_RULE ++INTLTOOL_PONG_RULE ++INTLTOOL_SERVER_RULE ++INTLTOOL_SHEET_RULE ++INTLTOOL_SOUNDLIST_RULE ++INTLTOOL_UI_RULE ++INTLTOOL_XAM_RULE ++INTLTOOL_KBD_RULE ++INTLTOOL_XML_RULE ++INTLTOOL_XML_NOMERGE_RULE ++INTLTOOL_CAVES_RULE ++INTLTOOL_SCHEMAS_RULE ++INTLTOOL_THEME_RULE ++INTLTOOL_SERVICE_RULE ++INTLTOOL_POLICY_RULE ++XGETTEXT ++MSGMERGE ++MSGFMT ++INTLTOOL_EXTRACT ++INTLTOOL_MERGE ++INTLTOOL_UPDATE ++INTLTOOL_PERL ++ALL_LINGUAS ++DATADIRNAME ++WARN_CFLAGS ++PKG_CONFIG ++HELP_DIR ++OMF_DIR ++DOC_USER_FORMATS ++ENABLE_SK_TRUE ++ENABLE_SK_FALSE ++DISTCHECK_CONFIGURE_FLAGS ++HAVE_GNOME_DOC_UTILS_TRUE ++HAVE_GNOME_DOC_UTILS_FALSE ++GLIB_GENMARSHAL ++GETTEXT_PACKAGE ++USE_NLS ++MSGFMT_OPTS ++GMSGFMT ++CATALOGS ++CATOBJEXT ++GMOFILES ++INSTOBJEXT ++INTLLIBS ++PO_IN_DATADIR_TRUE ++PO_IN_DATADIR_FALSE ++POFILES ++POSUB ++MKINSTALLDIRS ++GLIB_REQUIRED ++GTK_REQUIRED ++GDK_REQUIRED ++LIBGNOME_REQUIRED ++LIBGNOMEUI_REQUIRED ++HAL_REQUIRED ++DBUS_REQUIRED ++LIBGLADE_REQUIRED ++LIBNOTIFY_REQUIRED ++LIBWNCK_REQUIRED ++CAIRO_REQUIRED ++UNIQUE_REQUIRED ++LIBPANEL_REQUIRED ++GSTREAMER_REQUIRED ++XRANDR_REQUIRED ++POLKIT_GNOME_REQUIRED ++GLIB_CFLAGS ++GLIB_LIBS ++HAL_CFLAGS ++HAL_LIBS ++GSTREAMER_CFLAGS ++GSTREAMER_LIBS ++DBUS_CFLAGS ++DBUS_LIBS ++GNOME_CFLAGS ++GNOME_LIBS ++GDK_CFLAGS ++GDK_LIBS ++XRANDR_CFLAGS ++XRANDR_LIBS ++GCONFTOOL ++GCONF_SCHEMA_CONFIG_SOURCE ++GCONF_SCHEMA_FILE_DIR ++GCONF_SCHEMAS_INSTALL_TRUE ++GCONF_SCHEMAS_INSTALL_FALSE ++XMKMF ++X_CFLAGS ++X_PRE_LIBS ++X_LIBS ++X_EXTRA_LIBS ++SYSCONFDIR ++DATADIR ++BINDIR ++SBINDIR ++DOCDIR ++POLKIT_CFLAGS ++POLKIT_LIBS ++HAVE_TESTS_TRUE ++HAVE_TESTS_FALSE ++POLKIT_GNOME_CFLAGS ++POLKIT_GNOME_LIBS ++HAVE_GCONF_DEFAULTS_TRUE ++HAVE_GCONF_DEFAULTS_FALSE ++HAVE_APPLETS_TRUE ++HAVE_APPLETS_FALSE ++XMLTO ++DOCBOOK_DOCS_ENABLED_TRUE ++DOCBOOK_DOCS_ENABLED_FALSE ++DBUS_SERVICES_DIR ++LIBNOTIFY_CFLAGS ++LIBNOTIFY_LIBS ++HAVE_LIBNOTIFY_TRUE ++HAVE_LIBNOTIFY_FALSE ++UNIQUE_CFLAGS ++UNIQUE_LIBS ++HAVE_UNIQUE_TRUE ++HAVE_UNIQUE_FALSE ++GPM_EXTRA_LIBS ++DOCBOOK2MAN ++HAVE_DOCBOOK2MAN_TRUE ++HAVE_DOCBOOK2MAN_FALSE ++LIB@&t@OBJS ++LTLIBOBJS' ++ac_subst_files='' ++ ac_precious_vars='build_alias ++host_alias ++target_alias ++CC ++CFLAGS ++LDFLAGS ++LIBS ++CPPFLAGS ++CPP ++PKG_CONFIG ++GLIB_CFLAGS ++GLIB_LIBS ++HAL_CFLAGS ++HAL_LIBS ++GSTREAMER_CFLAGS ++GSTREAMER_LIBS ++DBUS_CFLAGS ++DBUS_LIBS ++GNOME_CFLAGS ++GNOME_LIBS ++GDK_CFLAGS ++GDK_LIBS ++XRANDR_CFLAGS ++XRANDR_LIBS ++XMKMF ++POLKIT_CFLAGS ++POLKIT_LIBS ++POLKIT_GNOME_CFLAGS ++POLKIT_GNOME_LIBS ++LIBNOTIFY_CFLAGS ++LIBNOTIFY_LIBS ++UNIQUE_CFLAGS ++UNIQUE_LIBS' ++ ++ ++# Initialize some variables set by options. ++ac_init_help= ++ac_init_version=false ++# The variables have the same names as the options, with ++# dashes changed to underlines. ++cache_file=/dev/null ++exec_prefix=NONE ++no_create= ++no_recursion= ++prefix=NONE ++program_prefix=NONE ++program_suffix=NONE ++program_transform_name=s,x,x, ++silent= ++site= ++srcdir= ++verbose= ++x_includes=NONE ++x_libraries=NONE ++ ++# Installation directory options. ++# These are left unexpanded so users can "make install exec_prefix=/foo" ++# and all the variables that are supposed to be based on exec_prefix ++# by default will actually change. ++# Use braces instead of parens because sh, perl, etc. also accept them. ++# (The list follows the same order as the GNU Coding Standards.) ++bindir='${exec_prefix}/bin' ++sbindir='${exec_prefix}/sbin' ++libexecdir='${exec_prefix}/libexec' ++datarootdir='${prefix}/share' ++datadir='${datarootdir}' ++sysconfdir='${prefix}/etc' ++sharedstatedir='${prefix}/com' ++localstatedir='${prefix}/var' ++includedir='${prefix}/include' ++oldincludedir='/usr/include' ++docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' ++infodir='${datarootdir}/info' ++htmldir='${docdir}' ++dvidir='${docdir}' ++pdfdir='${docdir}' ++psdir='${docdir}' ++libdir='${exec_prefix}/lib' ++localedir='${datarootdir}/locale' ++mandir='${datarootdir}/man' ++ ++ac_prev= ++ac_dashdash= ++for ac_option ++do ++ # If the previous option needs an argument, assign it. ++ if test -n "$ac_prev"; then ++ eval $ac_prev=\$ac_option ++ ac_prev= ++ continue ++ fi ++ ++ case $ac_option in ++ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; ++ *) ac_optarg=yes ;; ++ esac ++ ++ # Accept the important Cygnus configure options, so we can diagnose typos. ++ ++ case $ac_dashdash$ac_option in ++ --) ++ ac_dashdash=yes ;; ++ ++ -bindir | --bindir | --bindi | --bind | --bin | --bi) ++ ac_prev=bindir ;; ++ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) ++ bindir=$ac_optarg ;; ++ ++ -build | --build | --buil | --bui | --bu) ++ ac_prev=build_alias ;; ++ -build=* | --build=* | --buil=* | --bui=* | --bu=*) ++ build_alias=$ac_optarg ;; ++ ++ -cache-file | --cache-file | --cache-fil | --cache-fi \ ++ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ++ ac_prev=cache_file ;; ++ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ ++ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) ++ cache_file=$ac_optarg ;; ++ ++ --config-cache | -C) ++ cache_file=config.cache ;; ++ ++ -datadir | --datadir | --datadi | --datad) ++ ac_prev=datadir ;; ++ -datadir=* | --datadir=* | --datadi=* | --datad=*) ++ datadir=$ac_optarg ;; ++ ++ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ ++ | --dataroo | --dataro | --datar) ++ ac_prev=datarootdir ;; ++ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ ++ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) ++ datarootdir=$ac_optarg ;; ++ ++ -disable-* | --disable-*) ++ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` ++ # Reject names that are not valid shell variable names. ++ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid feature name: $ac_feature" >&2 ++ { (exit 1); exit 1; }; } ++ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` ++ eval enable_$ac_feature=no ;; ++ ++ -docdir | --docdir | --docdi | --doc | --do) ++ ac_prev=docdir ;; ++ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) ++ docdir=$ac_optarg ;; ++ ++ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ++ ac_prev=dvidir ;; ++ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) ++ dvidir=$ac_optarg ;; ++ ++ -enable-* | --enable-*) ++ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` ++ # Reject names that are not valid shell variable names. ++ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid feature name: $ac_feature" >&2 ++ { (exit 1); exit 1; }; } ++ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` ++ eval enable_$ac_feature=\$ac_optarg ;; ++ ++ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ ++ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ ++ | --exec | --exe | --ex) ++ ac_prev=exec_prefix ;; ++ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ ++ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ ++ | --exec=* | --exe=* | --ex=*) ++ exec_prefix=$ac_optarg ;; ++ ++ -gas | --gas | --ga | --g) ++ # Obsolete; use --with-gas. ++ with_gas=yes ;; ++ ++ -help | --help | --hel | --he | -h) ++ ac_init_help=long ;; ++ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ++ ac_init_help=recursive ;; ++ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ++ ac_init_help=short ;; ++ ++ -host | --host | --hos | --ho) ++ ac_prev=host_alias ;; ++ -host=* | --host=* | --hos=* | --ho=*) ++ host_alias=$ac_optarg ;; ++ ++ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ++ ac_prev=htmldir ;; ++ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ ++ | --ht=*) ++ htmldir=$ac_optarg ;; ++ ++ -includedir | --includedir | --includedi | --included | --include \ ++ | --includ | --inclu | --incl | --inc) ++ ac_prev=includedir ;; ++ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ ++ | --includ=* | --inclu=* | --incl=* | --inc=*) ++ includedir=$ac_optarg ;; ++ ++ -infodir | --infodir | --infodi | --infod | --info | --inf) ++ ac_prev=infodir ;; ++ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) ++ infodir=$ac_optarg ;; ++ ++ -libdir | --libdir | --libdi | --libd) ++ ac_prev=libdir ;; ++ -libdir=* | --libdir=* | --libdi=* | --libd=*) ++ libdir=$ac_optarg ;; ++ ++ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ ++ | --libexe | --libex | --libe) ++ ac_prev=libexecdir ;; ++ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ ++ | --libexe=* | --libex=* | --libe=*) ++ libexecdir=$ac_optarg ;; ++ ++ -localedir | --localedir | --localedi | --localed | --locale) ++ ac_prev=localedir ;; ++ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) ++ localedir=$ac_optarg ;; ++ ++ -localstatedir | --localstatedir | --localstatedi | --localstated \ ++ | --localstate | --localstat | --localsta | --localst | --locals) ++ ac_prev=localstatedir ;; ++ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ ++ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) ++ localstatedir=$ac_optarg ;; ++ ++ -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ++ ac_prev=mandir ;; ++ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) ++ mandir=$ac_optarg ;; ++ ++ -nfp | --nfp | --nf) ++ # Obsolete; use --without-fp. ++ with_fp=no ;; ++ ++ -no-create | --no-create | --no-creat | --no-crea | --no-cre \ ++ | --no-cr | --no-c | -n) ++ no_create=yes ;; ++ ++ -no-recursion | --no-recursion | --no-recursio | --no-recursi \ ++ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ++ no_recursion=yes ;; ++ ++ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ ++ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ ++ | --oldin | --oldi | --old | --ol | --o) ++ ac_prev=oldincludedir ;; ++ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ ++ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ ++ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) ++ oldincludedir=$ac_optarg ;; ++ ++ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ++ ac_prev=prefix ;; ++ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) ++ prefix=$ac_optarg ;; ++ ++ -program-prefix | --program-prefix | --program-prefi | --program-pref \ ++ | --program-pre | --program-pr | --program-p) ++ ac_prev=program_prefix ;; ++ -program-prefix=* | --program-prefix=* | --program-prefi=* \ ++ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) ++ program_prefix=$ac_optarg ;; ++ ++ -program-suffix | --program-suffix | --program-suffi | --program-suff \ ++ | --program-suf | --program-su | --program-s) ++ ac_prev=program_suffix ;; ++ -program-suffix=* | --program-suffix=* | --program-suffi=* \ ++ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) ++ program_suffix=$ac_optarg ;; ++ ++ -program-transform-name | --program-transform-name \ ++ | --program-transform-nam | --program-transform-na \ ++ | --program-transform-n | --program-transform- \ ++ | --program-transform | --program-transfor \ ++ | --program-transfo | --program-transf \ ++ | --program-trans | --program-tran \ ++ | --progr-tra | --program-tr | --program-t) ++ ac_prev=program_transform_name ;; ++ -program-transform-name=* | --program-transform-name=* \ ++ | --program-transform-nam=* | --program-transform-na=* \ ++ | --program-transform-n=* | --program-transform-=* \ ++ | --program-transform=* | --program-transfor=* \ ++ | --program-transfo=* | --program-transf=* \ ++ | --program-trans=* | --program-tran=* \ ++ | --progr-tra=* | --program-tr=* | --program-t=*) ++ program_transform_name=$ac_optarg ;; ++ ++ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ++ ac_prev=pdfdir ;; ++ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) ++ pdfdir=$ac_optarg ;; ++ ++ -psdir | --psdir | --psdi | --psd | --ps) ++ ac_prev=psdir ;; ++ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) ++ psdir=$ac_optarg ;; ++ ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ++ | -silent | --silent | --silen | --sile | --sil) ++ silent=yes ;; ++ ++ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ++ ac_prev=sbindir ;; ++ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ ++ | --sbi=* | --sb=*) ++ sbindir=$ac_optarg ;; ++ ++ -sharedstatedir | --sharedstatedir | --sharedstatedi \ ++ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ ++ | --sharedst | --shareds | --shared | --share | --shar \ ++ | --sha | --sh) ++ ac_prev=sharedstatedir ;; ++ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ ++ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ ++ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ ++ | --sha=* | --sh=*) ++ sharedstatedir=$ac_optarg ;; ++ ++ -site | --site | --sit) ++ ac_prev=site ;; ++ -site=* | --site=* | --sit=*) ++ site=$ac_optarg ;; ++ ++ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ++ ac_prev=srcdir ;; ++ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) ++ srcdir=$ac_optarg ;; ++ ++ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ ++ | --syscon | --sysco | --sysc | --sys | --sy) ++ ac_prev=sysconfdir ;; ++ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ ++ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) ++ sysconfdir=$ac_optarg ;; ++ ++ -target | --target | --targe | --targ | --tar | --ta | --t) ++ ac_prev=target_alias ;; ++ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) ++ target_alias=$ac_optarg ;; ++ ++ -v | -verbose | --verbose | --verbos | --verbo | --verb) ++ verbose=yes ;; ++ ++ -version | --version | --versio | --versi | --vers | -V) ++ ac_init_version=: ;; ++ ++ -with-* | --with-*) ++ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` ++ # Reject names that are not valid shell variable names. ++ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid package name: $ac_package" >&2 ++ { (exit 1); exit 1; }; } ++ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` ++ eval with_$ac_package=\$ac_optarg ;; ++ ++ -without-* | --without-*) ++ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` ++ # Reject names that are not valid shell variable names. ++ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid package name: $ac_package" >&2 ++ { (exit 1); exit 1; }; } ++ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` ++ eval with_$ac_package=no ;; ++ ++ --x) ++ # Obsolete; use --with-x. ++ with_x=yes ;; ++ ++ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ ++ | --x-incl | --x-inc | --x-in | --x-i) ++ ac_prev=x_includes ;; ++ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ ++ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) ++ x_includes=$ac_optarg ;; ++ ++ -x-libraries | --x-libraries | --x-librarie | --x-librari \ ++ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ++ ac_prev=x_libraries ;; ++ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ ++ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) ++ x_libraries=$ac_optarg ;; ++ ++ -*) { echo "$as_me: error: unrecognized option: $ac_option ++Try \`$0 --help' for more information." >&2 ++ { (exit 1); exit 1; }; } ++ ;; ++ ++ *=*) ++ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` ++ # Reject names that are not valid shell variable names. ++ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 ++ { (exit 1); exit 1; }; } ++ eval $ac_envvar=\$ac_optarg ++ export $ac_envvar ;; ++ ++ *) ++ # FIXME: should be removed in autoconf 3.0. ++ echo "$as_me: WARNING: you should use --build, --host, --target" >&2 ++ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ echo "$as_me: WARNING: invalid host type: $ac_option" >&2 ++ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ++ ;; ++ ++ esac ++done ++ ++if test -n "$ac_prev"; then ++ ac_option=--`echo $ac_prev | sed 's/_/-/g'` ++ { echo "$as_me: error: missing argument to $ac_option" >&2 ++ { (exit 1); exit 1; }; } ++fi ++ ++# Be sure to have absolute directory names. ++for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ ++ datadir sysconfdir sharedstatedir localstatedir includedir \ ++ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ ++ libdir localedir mandir ++do ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ [\\/$]* | ?:[\\/]* ) continue;; ++ NONE | '' ) case $ac_var in *prefix ) continue;; esac;; ++ esac ++ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 ++ { (exit 1); exit 1; }; } ++done ++ ++# There might be people who depend on the old broken behavior: `$host' ++# used to hold the argument of --host etc. ++# FIXME: To remove some day. ++build=$build_alias ++host=$host_alias ++target=$target_alias ++ ++# FIXME: To remove some day. ++if test "x$host_alias" != x; then ++ if test "x$build_alias" = x; then ++ cross_compiling=maybe ++ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. ++ If a cross compiler is detected then cross compile mode will be used." >&2 ++ elif test "x$build_alias" != "x$host_alias"; then ++ cross_compiling=yes ++ fi ++fi ++ ++ac_tool_prefix= ++test -n "$host_alias" && ac_tool_prefix=$host_alias- ++ ++test "$silent" = yes && exec 6>/dev/null ++ ++ ++ac_pwd=`pwd` && test -n "$ac_pwd" && ++ac_ls_di=`ls -di .` && ++ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || ++ { echo "$as_me: error: Working directory cannot be determined" >&2 ++ { (exit 1); exit 1; }; } ++test "X$ac_ls_di" = "X$ac_pwd_ls_di" || ++ { echo "$as_me: error: pwd does not report name of working directory" >&2 ++ { (exit 1); exit 1; }; } ++ ++ ++# Find the source files, if location was not specified. ++if test -z "$srcdir"; then ++ ac_srcdir_defaulted=yes ++ # Try the directory containing this script, then the parent directory. ++ ac_confdir=`$as_dirname -- "$0" || ++$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$0" : 'X\(//\)[^/]' \| \ ++ X"$0" : 'X\(//\)$' \| \ ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$0" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ srcdir=$ac_confdir ++ if test ! -r "$srcdir/$ac_unique_file"; then ++ srcdir=.. ++ fi ++else ++ ac_srcdir_defaulted=no ++fi ++if test ! -r "$srcdir/$ac_unique_file"; then ++ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." ++ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 ++ { (exit 1); exit 1; }; } ++fi ++ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ++ac_abs_confdir=`( ++ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 ++ { (exit 1); exit 1; }; } ++ pwd)` ++# When building in place, set srcdir=. ++if test "$ac_abs_confdir" = "$ac_pwd"; then ++ srcdir=. ++fi ++# Remove unnecessary trailing slashes from srcdir. ++# Double slashes in file names in object file debugging info ++# mess up M-x gdb in Emacs. ++case $srcdir in ++*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; ++esac ++for ac_var in $ac_precious_vars; do ++ eval ac_env_${ac_var}_set=\${${ac_var}+set} ++ eval ac_env_${ac_var}_value=\$${ac_var} ++ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} ++ eval ac_cv_env_${ac_var}_value=\$${ac_var} ++done ++ ++# ++# Report the --help message. ++# ++if test "$ac_init_help" = "long"; then ++ # Omit some internal or obsolete options to make the list less imposing. ++ # This message is too long to be a string in the A/UX 3.1 sh. ++ cat <<_ACEOF ++\`configure' configures gnome-power-manager 2.24.0 to adapt to many kinds of systems. ++ ++Usage: $0 [OPTION]... [VAR=VALUE]... ++ ++To assign environment variables (e.g., CC, CFLAGS...), specify them as ++VAR=VALUE. See below for descriptions of some of the useful variables. ++ ++Defaults for the options are specified in brackets. ++ ++Configuration: ++ -h, --help display this help and exit ++ --help=short display options specific to this package ++ --help=recursive display the short help of all the included packages ++ -V, --version display version information and exit ++ -q, --quiet, --silent do not print \`checking...' messages ++ --cache-file=FILE cache test results in FILE [disabled] ++ -C, --config-cache alias for \`--cache-file=config.cache' ++ -n, --no-create do not create output files ++ --srcdir=DIR find the sources in DIR [configure dir or \`..'] ++ ++Installation directories: ++ --prefix=PREFIX install architecture-independent files in PREFIX ++ [$ac_default_prefix] ++ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX ++ [PREFIX] ++ ++By default, \`make install' will install all the files in ++\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify ++an installation prefix other than \`$ac_default_prefix' using \`--prefix', ++for instance \`--prefix=\$HOME'. ++ ++For better control, use the options below. ++ ++Fine tuning of the installation directories: ++ --bindir=DIR user executables [EPREFIX/bin] ++ --sbindir=DIR system admin executables [EPREFIX/sbin] ++ --libexecdir=DIR program executables [EPREFIX/libexec] ++ --sysconfdir=DIR read-only single-machine data [PREFIX/etc] ++ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] ++ --localstatedir=DIR modifiable single-machine data [PREFIX/var] ++ --libdir=DIR object code libraries [EPREFIX/lib] ++ --includedir=DIR C header files [PREFIX/include] ++ --oldincludedir=DIR C header files for non-gcc [/usr/include] ++ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] ++ --datadir=DIR read-only architecture-independent data [DATAROOTDIR] ++ --infodir=DIR info documentation [DATAROOTDIR/info] ++ --localedir=DIR locale-dependent data [DATAROOTDIR/locale] ++ --mandir=DIR man documentation [DATAROOTDIR/man] ++ --docdir=DIR documentation root @<:@DATAROOTDIR/doc/gnome-power-manager@:>@ ++ --htmldir=DIR html documentation [DOCDIR] ++ --dvidir=DIR dvi documentation [DOCDIR] ++ --pdfdir=DIR pdf documentation [DOCDIR] ++ --psdir=DIR ps documentation [DOCDIR] ++_ACEOF ++ ++ cat <<\_ACEOF ++ ++Program names: ++ --program-prefix=PREFIX prepend PREFIX to installed program names ++ --program-suffix=SUFFIX append SUFFIX to installed program names ++ --program-transform-name=PROGRAM run sed PROGRAM on installed program names ++ ++X features: ++ --x-includes=DIR X include files are in DIR ++ --x-libraries=DIR X library files are in DIR ++ ++System types: ++ --build=BUILD configure for building on BUILD [guessed] ++ --host=HOST cross-compile to build programs to run on HOST [BUILD] ++_ACEOF ++fi ++ ++if test -n "$ac_init_help"; then ++ case $ac_init_help in ++ short | recursive ) echo "Configuration of gnome-power-manager 2.24.0:";; ++ esac ++ cat <<\_ACEOF ++ ++Optional Features: ++ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) ++ --enable-FEATURE[=ARG] include FEATURE [ARG=yes] ++ --disable-dependency-tracking speeds up one-time build ++ --enable-dependency-tracking do not reject slow dependency extractors ++ --enable-shared@<:@=PKGS@:>@ build shared libraries @<:@default=yes@:>@ ++ --enable-static@<:@=PKGS@:>@ build static libraries @<:@default=yes@:>@ ++ --enable-fast-install@<:@=PKGS@:>@ ++ optimize for fast installation @<:@default=yes@:>@ ++ --disable-libtool-lock avoid locking (might break parallel builds) ++ --enable-compile-warnings=@<:@no/minimum/yes/maximum/error@:>@ ++ Turn on compiler warnings ++ --enable-iso-c Try to warn if code is not ISO C ++ --disable-scrollkeeper do not make updates to the scrollkeeper database ++ --disable-schemas-install Disable the schemas installation ++ --enable-policykit support PolicyKit permissions daemon (requires ++ polkitd) ++ --enable-checkfg Use check-foreground-console (Ubuntu systems) ++ --disable-xevents Support XEVENTS (requires a new x.org) ++ --enable-tests Build self tests ++ --disable-gconf-defaults ++ Allow setting gconf default settings ++ --disable-applets Build the extra power applets ++ --enable-docbook-docs build documentation (requires xmlto) ++ --enable-more-warnings Maximum compiler warnings ++ ++Optional Packages: ++ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] ++ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) ++ --with-pic try to use only PIC/non-PIC objects @<:@default=use ++ both@:>@ ++ --with-gnu-ld assume the C compiler uses GNU ld @<:@default=no@:>@ ++ --with-help-dir=DIR path to help docs ++ --with-omf-dir=DIR path to OMF files ++ --with-help-formats=FORMATS ++ list of formats ++ --with-gconf-source=sourceaddress ++ Config database for installing schema files. ++ --with-gconf-schema-file-dir=dir ++ Directory for installing schema files. ++ --with-x use the X Window System ++ --with-doc-dir= directory to install documentation ++ --with-dbus-services= ++ where D-BUS services directory is ++ --without-dpms-ext Include support for the DPMS extension. ++ ++Some influential environment variables: ++ CC C compiler command ++ CFLAGS C compiler flags ++ LDFLAGS linker flags, e.g. -L if you have libraries in a ++ nonstandard directory ++ LIBS libraries to pass to the linker, e.g. -l ++ CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if ++ you have headers in a nonstandard directory ++ CPP C preprocessor ++ PKG_CONFIG path to pkg-config utility ++ GLIB_CFLAGS C compiler flags for GLIB, overriding pkg-config ++ GLIB_LIBS linker flags for GLIB, overriding pkg-config ++ HAL_CFLAGS C compiler flags for HAL, overriding pkg-config ++ HAL_LIBS linker flags for HAL, overriding pkg-config ++ GSTREAMER_CFLAGS ++ C compiler flags for GSTREAMER, overriding pkg-config ++ GSTREAMER_LIBS ++ linker flags for GSTREAMER, overriding pkg-config ++ DBUS_CFLAGS C compiler flags for DBUS, overriding pkg-config ++ DBUS_LIBS linker flags for DBUS, overriding pkg-config ++ GNOME_CFLAGS ++ C compiler flags for GNOME, overriding pkg-config ++ GNOME_LIBS linker flags for GNOME, overriding pkg-config ++ GDK_CFLAGS C compiler flags for GDK, overriding pkg-config ++ GDK_LIBS linker flags for GDK, overriding pkg-config ++ XRANDR_CFLAGS ++ C compiler flags for XRANDR, overriding pkg-config ++ XRANDR_LIBS linker flags for XRANDR, overriding pkg-config ++ XMKMF Path to xmkmf, Makefile generator for X Window System ++ POLKIT_CFLAGS ++ C compiler flags for POLKIT, overriding pkg-config ++ POLKIT_LIBS linker flags for POLKIT, overriding pkg-config ++ POLKIT_GNOME_CFLAGS ++ C compiler flags for POLKIT_GNOME, overriding pkg-config ++ POLKIT_GNOME_LIBS ++ linker flags for POLKIT_GNOME, overriding pkg-config ++ LIBNOTIFY_CFLAGS ++ C compiler flags for LIBNOTIFY, overriding pkg-config ++ LIBNOTIFY_LIBS ++ linker flags for LIBNOTIFY, overriding pkg-config ++ UNIQUE_CFLAGS ++ C compiler flags for UNIQUE, overriding pkg-config ++ UNIQUE_LIBS linker flags for UNIQUE, overriding pkg-config ++ ++Use these variables to override the choices made by `configure' or to help ++it to find libraries and programs with nonstandard names/locations. ++ ++_ACEOF ++ac_status=$? ++fi ++ ++if test "$ac_init_help" = "recursive"; then ++ # If there are subdirs, report their specific --help. ++ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue ++ test -d "$ac_dir" || continue ++ ac_builddir=. ++ ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) ++ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; ++esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix ++ ++case $srcdir in ++ .) # We are building in place. ++ ac_srcdir=. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. ++ ac_srcdir=$srcdir$ac_dir_suffix; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; ++esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix ++ ++ cd "$ac_dir" || { ac_status=$?; continue; } ++ # Check for guested configure. ++ if test -f "$ac_srcdir/configure.gnu"; then ++ echo && ++ $SHELL "$ac_srcdir/configure.gnu" --help=recursive ++ elif test -f "$ac_srcdir/configure"; then ++ echo && ++ $SHELL "$ac_srcdir/configure" --help=recursive ++ else ++ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 ++ fi || ac_status=$? ++ cd "$ac_pwd" || { ac_status=$?; break; } ++ done ++fi ++ ++test -n "$ac_init_help" && exit $ac_status ++if $ac_init_version; then ++ cat <<\_ACEOF ++gnome-power-manager configure 2.24.0 ++generated by GNU Autoconf 2.61 ++ ++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, ++2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. ++This configure script is free software; the Free Software Foundation ++gives unlimited permission to copy, distribute and modify it. ++_ACEOF ++ exit ++fi ++cat >config.log <<_ACEOF ++This file contains any messages produced by compilers while ++running configure, to aid debugging if configure makes a mistake. ++ ++It was created by gnome-power-manager $as_me 2.24.0, which was ++generated by GNU Autoconf 2.61. Invocation command line was ++ ++ $ $0 $@ ++ ++_ACEOF ++exec 5>>config.log ++{ ++cat <<_ASUNAME ++@%:@@%:@ --------- @%:@@%:@ ++@%:@@%:@ Platform. @%:@@%:@ ++@%:@@%:@ --------- @%:@@%:@ ++ ++hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` ++uname -m = `(uname -m) 2>/dev/null || echo unknown` ++uname -r = `(uname -r) 2>/dev/null || echo unknown` ++uname -s = `(uname -s) 2>/dev/null || echo unknown` ++uname -v = `(uname -v) 2>/dev/null || echo unknown` ++ ++/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` ++/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` ++ ++/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` ++/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` ++/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` ++/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` ++/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` ++/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` ++/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` ++ ++_ASUNAME ++ ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ echo "PATH: $as_dir" ++done ++IFS=$as_save_IFS ++ ++} >&5 ++ ++cat >&5 <<_ACEOF ++ ++ ++@%:@@%:@ ----------- @%:@@%:@ ++@%:@@%:@ Core tests. @%:@@%:@ ++@%:@@%:@ ----------- @%:@@%:@ ++ ++_ACEOF ++ ++ ++# Keep a trace of the command line. ++# Strip out --no-create and --no-recursion so they do not pile up. ++# Strip out --silent because we don't want to record it for future runs. ++# Also quote any args containing shell meta-characters. ++# Make two passes to allow for proper duplicate-argument suppression. ++ac_configure_args= ++ac_configure_args0= ++ac_configure_args1= ++ac_must_keep_next=false ++for ac_pass in 1 2 ++do ++ for ac_arg ++ do ++ case $ac_arg in ++ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ++ | -silent | --silent | --silen | --sile | --sil) ++ continue ;; ++ *\'*) ++ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; ++ esac ++ case $ac_pass in ++ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; ++ 2) ++ ac_configure_args1="$ac_configure_args1 '$ac_arg'" ++ if test $ac_must_keep_next = true; then ++ ac_must_keep_next=false # Got value, back to normal. ++ else ++ case $ac_arg in ++ *=* | --config-cache | -C | -disable-* | --disable-* \ ++ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ ++ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ ++ | -with-* | --with-* | -without-* | --without-* | --x) ++ case "$ac_configure_args0 " in ++ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; ++ esac ++ ;; ++ -* ) ac_must_keep_next=true ;; ++ esac ++ fi ++ ac_configure_args="$ac_configure_args '$ac_arg'" ++ ;; ++ esac ++ done ++done ++$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } ++$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } ++ ++# When interrupted or exit'd, cleanup temporary files, and complete ++# config.log. We remove comments because anyway the quotes in there ++# would cause problems or look ugly. ++# WARNING: Use '\'' to represent an apostrophe within the trap. ++# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. ++trap 'exit_status=$? ++ # Save into config.log some information that might help in debugging. ++ { ++ echo ++ ++ cat <<\_ASBOX ++@%:@@%:@ ---------------- @%:@@%:@ ++@%:@@%:@ Cache variables. @%:@@%:@ ++@%:@@%:@ ---------------- @%:@@%:@ ++_ASBOX ++ echo ++ # The following way of writing the cache mishandles newlines in values, ++( ++ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ *) $as_unset $ac_var ;; ++ esac ;; ++ esac ++ done ++ (set) 2>&1 | ++ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) ++ sed -n \ ++ "s/'\''/'\''\\\\'\'''\''/g; ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ++ ;; #( ++ *) ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ++ ;; ++ esac | ++ sort ++) ++ echo ++ ++ cat <<\_ASBOX ++@%:@@%:@ ----------------- @%:@@%:@ ++@%:@@%:@ Output variables. @%:@@%:@ ++@%:@@%:@ ----------------- @%:@@%:@ ++_ASBOX ++ echo ++ for ac_var in $ac_subst_vars ++ do ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ esac ++ echo "$ac_var='\''$ac_val'\''" ++ done | sort ++ echo ++ ++ if test -n "$ac_subst_files"; then ++ cat <<\_ASBOX ++@%:@@%:@ ------------------- @%:@@%:@ ++@%:@@%:@ File substitutions. @%:@@%:@ ++@%:@@%:@ ------------------- @%:@@%:@ ++_ASBOX ++ echo ++ for ac_var in $ac_subst_files ++ do ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ esac ++ echo "$ac_var='\''$ac_val'\''" ++ done | sort ++ echo ++ fi ++ ++ if test -s confdefs.h; then ++ cat <<\_ASBOX ++@%:@@%:@ ----------- @%:@@%:@ ++@%:@@%:@ confdefs.h. @%:@@%:@ ++@%:@@%:@ ----------- @%:@@%:@ ++_ASBOX ++ echo ++ cat confdefs.h ++ echo ++ fi ++ test "$ac_signal" != 0 && ++ echo "$as_me: caught signal $ac_signal" ++ echo "$as_me: exit $exit_status" ++ } >&5 ++ rm -f core *.core core.conftest.* && ++ rm -f -r conftest* confdefs* conf$$* $ac_clean_files && ++ exit $exit_status ++' 0 ++for ac_signal in 1 2 13 15; do ++ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal ++done ++ac_signal=0 ++ ++# confdefs.h avoids OS command line length limits that DEFS can exceed. ++rm -f -r conftest* confdefs.h ++ ++# Predefined preprocessor variables. ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE_NAME "$PACKAGE_NAME" ++_ACEOF ++ ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE_TARNAME "$PACKAGE_TARNAME" ++_ACEOF ++ ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE_VERSION "$PACKAGE_VERSION" ++_ACEOF ++ ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE_STRING "$PACKAGE_STRING" ++_ACEOF ++ ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" ++_ACEOF ++ ++ ++# Let the site file select an alternate cache file if it wants to. ++# Prefer explicitly selected file to automatically selected ones. ++if test -n "$CONFIG_SITE"; then ++ set x "$CONFIG_SITE" ++elif test "x$prefix" != xNONE; then ++ set x "$prefix/share/config.site" "$prefix/etc/config.site" ++else ++ set x "$ac_default_prefix/share/config.site" \ ++ "$ac_default_prefix/etc/config.site" ++fi ++shift ++for ac_site_file ++do ++ if test -r "$ac_site_file"; then ++ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 ++echo "$as_me: loading site script $ac_site_file" >&6;} ++ sed 's/^/| /' "$ac_site_file" >&5 ++ . "$ac_site_file" ++ fi ++done ++ ++if test -r "$cache_file"; then ++ # Some versions of bash will fail to source /dev/null (special ++ # files actually), so we avoid doing that. ++ if test -f "$cache_file"; then ++ { echo "$as_me:$LINENO: loading cache $cache_file" >&5 ++echo "$as_me: loading cache $cache_file" >&6;} ++ case $cache_file in ++ [\\/]* | ?:[\\/]* ) . "$cache_file";; ++ *) . "./$cache_file";; ++ esac ++ fi ++else ++ { echo "$as_me:$LINENO: creating cache $cache_file" >&5 ++echo "$as_me: creating cache $cache_file" >&6;} ++ >$cache_file ++fi ++ ++# Check that the precious variables saved in the cache have kept the same ++# value. ++ac_cache_corrupted=false ++for ac_var in $ac_precious_vars; do ++ eval ac_old_set=\$ac_cv_env_${ac_var}_set ++ eval ac_new_set=\$ac_env_${ac_var}_set ++ eval ac_old_val=\$ac_cv_env_${ac_var}_value ++ eval ac_new_val=\$ac_env_${ac_var}_value ++ case $ac_old_set,$ac_new_set in ++ set,) ++ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 ++echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ++ ac_cache_corrupted=: ;; ++ ,set) ++ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 ++echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ++ ac_cache_corrupted=: ;; ++ ,);; ++ *) ++ if test "x$ac_old_val" != "x$ac_new_val"; then ++ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 ++echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ++ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 ++echo "$as_me: former value: $ac_old_val" >&2;} ++ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 ++echo "$as_me: current value: $ac_new_val" >&2;} ++ ac_cache_corrupted=: ++ fi;; ++ esac ++ # Pass precious variables to config.status. ++ if test "$ac_new_set" = set; then ++ case $ac_new_val in ++ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; ++ *) ac_arg=$ac_var=$ac_new_val ;; ++ esac ++ case " $ac_configure_args " in ++ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. ++ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; ++ esac ++ fi ++done ++if $ac_cache_corrupted; then ++ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 ++echo "$as_me: error: changes in the environment can compromise the build" >&2;} ++ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 ++echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++ ++ ++am__api_version="1.9" ++ac_aux_dir= ++for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do ++ if test -f "$ac_dir/install-sh"; then ++ ac_aux_dir=$ac_dir ++ ac_install_sh="$ac_aux_dir/install-sh -c" ++ break ++ elif test -f "$ac_dir/install.sh"; then ++ ac_aux_dir=$ac_dir ++ ac_install_sh="$ac_aux_dir/install.sh -c" ++ break ++ elif test -f "$ac_dir/shtool"; then ++ ac_aux_dir=$ac_dir ++ ac_install_sh="$ac_aux_dir/shtool install -c" ++ break ++ fi ++done ++if test -z "$ac_aux_dir"; then ++ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 ++echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++# These three variables are undocumented and unsupported, ++# and are intended to be withdrawn in a future Autoconf release. ++# They can cause serious problems if a builder's source tree is in a directory ++# whose full name contains unusual characters. ++ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ++ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ++ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. ++ ++ ++# Find a good install program. We prefer a C program (faster), ++# so one script is as good as another. But avoid the broken or ++# incompatible versions: ++# SysV /etc/install, /usr/sbin/install ++# SunOS /usr/etc/install ++# IRIX /sbin/install ++# AIX /bin/install ++# AmigaOS /C/install, which installs bootblocks on floppy discs ++# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag ++# AFS /usr/afsws/bin/install, which mishandles nonexistent args ++# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" ++# OS/2's system install, which has a completely different semantic ++# ./install, which can be erroneously created by make from ./install.sh. ++{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 ++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } ++if test -z "$INSTALL"; then ++if test "${ac_cv_path_install+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ # Account for people who put trailing slashes in PATH elements. ++case $as_dir/ in ++ ./ | .// | /cC/* | \ ++ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ++ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ ++ /usr/ucb/* ) ;; ++ *) ++ # OSF1 and SCO ODT 3.0 have their own names for install. ++ # Don't use installbsd from OSF since it installs stuff as root ++ # by default. ++ for ac_prog in ginstall scoinst install; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then ++ if test $ac_prog = install && ++ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then ++ # AIX install. It has an incompatible calling convention. ++ : ++ elif test $ac_prog = install && ++ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then ++ # program-specific install script used by HP pwplus--don't use. ++ : ++ else ++ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" ++ break 3 ++ fi ++ fi ++ done ++ done ++ ;; ++esac ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ if test "${ac_cv_path_install+set}" = set; then ++ INSTALL=$ac_cv_path_install ++ else ++ # As a last resort, use the slow shell script. Don't cache a ++ # value for INSTALL within a source directory, because that will ++ # break other packages using the cache if that directory is ++ # removed, or if the value is a relative name. ++ INSTALL=$ac_install_sh ++ fi ++fi ++{ echo "$as_me:$LINENO: result: $INSTALL" >&5 ++echo "${ECHO_T}$INSTALL" >&6; } ++ ++# Use test -z because SunOS4 sh mishandles braces in ${var-val}. ++# It thinks the first close brace ends the variable substitution. ++test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' ++ ++test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' ++ ++test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' ++ ++{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5 ++echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } ++# Just in case ++sleep 1 ++echo timestamp > conftest.file ++# Do `set' in a subshell so we don't clobber the current shell's ++# arguments. Must try -L first in case configure is actually a ++# symlink; some systems play weird games with the mod time of symlinks ++# (eg FreeBSD returns the mod time of the symlink's containing ++# directory). ++if ( ++ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` ++ if test "$*" = "X"; then ++ # -L didn't work. ++ set X `ls -t $srcdir/configure conftest.file` ++ fi ++ rm -f conftest.file ++ if test "$*" != "X $srcdir/configure conftest.file" \ ++ && test "$*" != "X conftest.file $srcdir/configure"; then ++ ++ # If neither matched, then we have a broken ls. This can happen ++ # if, for instance, CONFIG_SHELL is bash and it inherits a ++ # broken ls alias from the environment. This has actually ++ # happened. Such a system could not be considered "sane". ++ { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken ++alias in your environment" >&5 ++echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken ++alias in your environment" >&2;} ++ { (exit 1); exit 1; }; } ++ fi ++ ++ test "$2" = conftest.file ++ ) ++then ++ # Ok. ++ : ++else ++ { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! ++Check your system clock" >&5 ++echo "$as_me: error: newly created file is older than distributed files! ++Check your system clock" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++{ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++test "$program_prefix" != NONE && ++ program_transform_name="s&^&$program_prefix&;$program_transform_name" ++# Use a double $ so make ignores it. ++test "$program_suffix" != NONE && ++ program_transform_name="s&\$&$program_suffix&;$program_transform_name" ++# Double any \ or $. echo might interpret backslashes. ++# By default was `s,x,x', remove it if useless. ++cat <<\_ACEOF >conftest.sed ++s/[\\$]/&&/g;s/;s,x,x,$// ++_ACEOF ++program_transform_name=`echo $program_transform_name | sed -f conftest.sed` ++rm -f conftest.sed ++ ++# expand $ac_aux_dir to an absolute path ++am_aux_dir=`cd $ac_aux_dir && pwd` ++ ++test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" ++# Use eval to expand $SHELL ++if eval "$MISSING --run true"; then ++ am_missing_run="$MISSING --run " ++else ++ am_missing_run= ++ { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 ++echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} ++fi ++ ++if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then ++ # We used to keeping the `.' as first argument, in order to ++ # allow $(mkdir_p) to be used without argument. As in ++ # $(mkdir_p) $(somedir) ++ # where $(somedir) is conditionally defined. However this is wrong ++ # for two reasons: ++ # 1. if the package is installed by a user who cannot write `.' ++ # make install will fail, ++ # 2. the above comment should most certainly read ++ # $(mkdir_p) $(DESTDIR)$(somedir) ++ # so it does not work when $(somedir) is undefined and ++ # $(DESTDIR) is not. ++ # To support the latter case, we have to write ++ # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), ++ # so the `.' trick is pointless. ++ mkdir_p='mkdir -p --' ++else ++ # On NextStep and OpenStep, the `mkdir' command does not ++ # recognize any option. It will interpret all options as ++ # directories to create, and then abort because `.' already ++ # exists. ++ for d in ./-p ./--version; ++ do ++ test -d $d && rmdir $d ++ done ++ # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. ++ if test -f "$ac_aux_dir/mkinstalldirs"; then ++ mkdir_p='$(mkinstalldirs)' ++ else ++ mkdir_p='$(install_sh) -d' ++ fi ++fi ++ ++for ac_prog in gawk mawk nawk awk ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_AWK+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$AWK"; then ++ ac_cv_prog_AWK="$AWK" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_AWK="$ac_prog" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++AWK=$ac_cv_prog_AWK ++if test -n "$AWK"; then ++ { echo "$as_me:$LINENO: result: $AWK" >&5 ++echo "${ECHO_T}$AWK" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ test -n "$AWK" && break ++done ++ ++{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 ++echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } ++set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` ++if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.make <<\_ACEOF ++SHELL = /bin/sh ++all: ++ @echo '@@@%%%=$(MAKE)=@@@%%%' ++_ACEOF ++# GNU make sometimes prints "make[1]: Entering...", which would confuse us. ++case `${MAKE-make} -f conftest.make 2>/dev/null` in ++ *@@@%%%=?*=@@@%%%*) ++ eval ac_cv_prog_make_${ac_make}_set=yes;; ++ *) ++ eval ac_cv_prog_make_${ac_make}_set=no;; ++esac ++rm -f conftest.make ++fi ++if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ SET_MAKE= ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ SET_MAKE="MAKE=${MAKE-make}" ++fi ++ ++rm -rf .tst 2>/dev/null ++mkdir .tst 2>/dev/null ++if test -d .tst; then ++ am__leading_dot=. ++else ++ am__leading_dot=_ ++fi ++rmdir .tst 2>/dev/null ++ ++# test to see if srcdir already configured ++if test "`cd $srcdir && pwd`" != "`pwd`" && ++ test -f $srcdir/config.status; then ++ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 ++echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++# test whether we have cygpath ++if test -z "$CYGPATH_W"; then ++ if (cygpath --version) >/dev/null 2>/dev/null; then ++ CYGPATH_W='cygpath -w' ++ else ++ CYGPATH_W=echo ++ fi ++fi ++ ++ ++# Define the identity of the package. ++ PACKAGE=gnome-power-manager ++ VERSION=2.24.0 ++ ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE "$PACKAGE" ++_ACEOF ++ ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define VERSION "$VERSION" ++_ACEOF ++ ++# Some tools Automake needs. ++ ++ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} ++ ++ ++AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} ++ ++ ++AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} ++ ++ ++AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} ++ ++ ++MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} ++ ++install_sh=${install_sh-"$am_aux_dir/install-sh"} ++ ++# Installed binaries are usually stripped using `strip' when the user ++# run `make install-strip'. However `strip' might not be the right ++# tool to use in cross-compilation environments, therefore Automake ++# will honor the `STRIP' environment variable to overrule this program. ++if test "$cross_compiling" != no; then ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. ++set dummy ${ac_tool_prefix}strip; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_STRIP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$STRIP"; then ++ ac_cv_prog_STRIP="$STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_STRIP="${ac_tool_prefix}strip" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++STRIP=$ac_cv_prog_STRIP ++if test -n "$STRIP"; then ++ { echo "$as_me:$LINENO: result: $STRIP" >&5 ++echo "${ECHO_T}$STRIP" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_STRIP"; then ++ ac_ct_STRIP=$STRIP ++ # Extract the first word of "strip", so it can be a program name with args. ++set dummy strip; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_STRIP"; then ++ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_STRIP="strip" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP ++if test -n "$ac_ct_STRIP"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 ++echo "${ECHO_T}$ac_ct_STRIP" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_STRIP" = x; then ++ STRIP=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ STRIP=$ac_ct_STRIP ++ fi ++else ++ STRIP="$ac_cv_prog_STRIP" ++fi ++ ++fi ++INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" ++ ++# We need awk for the "check" target. The system "awk" is bad on ++# some platforms. ++# Always define AMTAR for backward compatibility. ++ ++AMTAR=${AMTAR-"${am_missing_run}tar"} ++ ++am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' ++ ++ ++ ++ ++ ++ac_config_headers="$ac_config_headers config.h" ++ ++ ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. ++set dummy ${ac_tool_prefix}gcc; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_CC+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$CC"; then ++ ac_cv_prog_CC="$CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_CC="${ac_tool_prefix}gcc" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++CC=$ac_cv_prog_CC ++if test -n "$CC"; then ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_CC"; then ++ ac_ct_CC=$CC ++ # Extract the first word of "gcc", so it can be a program name with args. ++set dummy gcc; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_CC+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_CC"; then ++ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_CC="gcc" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_CC=$ac_cv_prog_ac_ct_CC ++if test -n "$ac_ct_CC"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_CC" = x; then ++ CC="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ CC=$ac_ct_CC ++ fi ++else ++ CC="$ac_cv_prog_CC" ++fi ++ ++if test -z "$CC"; then ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. ++set dummy ${ac_tool_prefix}cc; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_CC+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$CC"; then ++ ac_cv_prog_CC="$CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_CC="${ac_tool_prefix}cc" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++CC=$ac_cv_prog_CC ++if test -n "$CC"; then ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ fi ++fi ++if test -z "$CC"; then ++ # Extract the first word of "cc", so it can be a program name with args. ++set dummy cc; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_CC+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$CC"; then ++ ac_cv_prog_CC="$CC" # Let the user override the test. ++else ++ ac_prog_rejected=no ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ++ ac_prog_rejected=yes ++ continue ++ fi ++ ac_cv_prog_CC="cc" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++if test $ac_prog_rejected = yes; then ++ # We found a bogon in the path, so make sure we never use it. ++ set dummy $ac_cv_prog_CC ++ shift ++ if test $@%:@ != 0; then ++ # We chose a different compiler from the bogus one. ++ # However, it has the same basename, so the bogon will be chosen ++ # first if we set CC to just the basename; use the full file name. ++ shift ++ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" ++ fi ++fi ++fi ++fi ++CC=$ac_cv_prog_CC ++if test -n "$CC"; then ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$CC"; then ++ if test -n "$ac_tool_prefix"; then ++ for ac_prog in cl.exe ++ do ++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. ++set dummy $ac_tool_prefix$ac_prog; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_CC+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$CC"; then ++ ac_cv_prog_CC="$CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_CC="$ac_tool_prefix$ac_prog" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++CC=$ac_cv_prog_CC ++if test -n "$CC"; then ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ test -n "$CC" && break ++ done ++fi ++if test -z "$CC"; then ++ ac_ct_CC=$CC ++ for ac_prog in cl.exe ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_CC+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_CC"; then ++ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_CC="$ac_prog" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_CC=$ac_cv_prog_ac_ct_CC ++if test -n "$ac_ct_CC"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ test -n "$ac_ct_CC" && break ++done ++ ++ if test "x$ac_ct_CC" = x; then ++ CC="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ CC=$ac_ct_CC ++ fi ++fi ++ ++fi ++ ++ ++test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH ++See \`config.log' for more details." >&5 ++echo "$as_me: error: no acceptable C compiler found in \$PATH ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++ ++# Provide some information about the compiler. ++echo "$as_me:$LINENO: checking for C compiler version" >&5 ++ac_compiler=`set X $ac_compile; echo $2` ++{ (ac_try="$ac_compiler --version >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler --version >&5") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++{ (ac_try="$ac_compiler -v >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -v >&5") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++{ (ac_try="$ac_compiler -V >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -V >&5") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++ ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++ac_clean_files_save=$ac_clean_files ++ac_clean_files="$ac_clean_files a.out a.exe b.out" ++# Try to create an executable without -o first, disregard a.out. ++# It will help us diagnose broken compilers, and finding out an intuition ++# of exeext. ++{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 ++echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; } ++ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` ++# ++# List of possible output files, starting from the most likely. ++# The algorithm is not robust to junk in `.', hence go to wildcards (a.*) ++# only as a last resort. b.out is created by i960 compilers. ++ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out' ++# ++# The IRIX 6 linker writes into existing files which may not be ++# executable, retaining their permissions. Remove them first so a ++# subsequent execution test works. ++ac_rmfiles= ++for ac_file in $ac_files ++do ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; ++ * ) ac_rmfiles="$ac_rmfiles $ac_file";; ++ esac ++done ++rm -f $ac_rmfiles ++ ++if { (ac_try="$ac_link_default" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link_default") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. ++# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' ++# in a Makefile. We should not override ac_cv_exeext if it was cached, ++# so that the user can short-circuit this test for compilers unknown to ++# Autoconf. ++for ac_file in $ac_files '' ++do ++ test -f "$ac_file" || continue ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ++ ;; ++ [ab].out ) ++ # We found the default executable, but exeext='' is most ++ # certainly right. ++ break;; ++ *.* ) ++ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; ++ then :; else ++ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` ++ fi ++ # We set ac_cv_exeext here because the later test for it is not ++ # safe: cross compilers may not add the suffix if given an `-o' ++ # argument, so we may need to know it at that point already. ++ # Even if this section looks crufty: it has the advantage of ++ # actually working. ++ break;; ++ * ) ++ break;; ++ esac ++done ++test "$ac_cv_exeext" = no && ac_cv_exeext= ++ ++else ++ ac_file='' ++fi ++ ++{ echo "$as_me:$LINENO: result: $ac_file" >&5 ++echo "${ECHO_T}$ac_file" >&6; } ++if test -z "$ac_file"; then ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++{ { echo "$as_me:$LINENO: error: C compiler cannot create executables ++See \`config.log' for more details." >&5 ++echo "$as_me: error: C compiler cannot create executables ++See \`config.log' for more details." >&2;} ++ { (exit 77); exit 77; }; } ++fi ++ ++ac_exeext=$ac_cv_exeext ++ ++# Check that the compiler produces executables we can run. If not, either ++# the compiler is broken, or we cross compile. ++{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5 ++echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; } ++# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 ++# If not cross compiling, check that we can run a simple program. ++if test "$cross_compiling" != yes; then ++ if { ac_try='./$ac_file' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ cross_compiling=no ++ else ++ if test "$cross_compiling" = maybe; then ++ cross_compiling=yes ++ else ++ { { echo "$as_me:$LINENO: error: cannot run C compiled programs. ++If you meant to cross compile, use \`--host'. ++See \`config.log' for more details." >&5 ++echo "$as_me: error: cannot run C compiled programs. ++If you meant to cross compile, use \`--host'. ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++ fi ++ fi ++fi ++{ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ ++rm -f a.out a.exe conftest$ac_cv_exeext b.out ++ac_clean_files=$ac_clean_files_save ++# Check that the compiler produces executables we can run. If not, either ++# the compiler is broken, or we cross compile. ++{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 ++echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; } ++{ echo "$as_me:$LINENO: result: $cross_compiling" >&5 ++echo "${ECHO_T}$cross_compiling" >&6; } ++ ++{ echo "$as_me:$LINENO: checking for suffix of executables" >&5 ++echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; } ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ # If both `conftest.exe' and `conftest' are `present' (well, observable) ++# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will ++# work properly (i.e., refer to `conftest.exe'), while it won't with ++# `rm'. ++for ac_file in conftest.exe conftest conftest.*; do ++ test -f "$ac_file" || continue ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; ++ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` ++ break;; ++ * ) break;; ++ esac ++done ++else ++ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link ++See \`config.log' for more details." >&5 ++echo "$as_me: error: cannot compute suffix of executables: cannot compile and link ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++rm -f conftest$ac_cv_exeext ++{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 ++echo "${ECHO_T}$ac_cv_exeext" >&6; } ++ ++rm -f conftest.$ac_ext ++EXEEXT=$ac_cv_exeext ++ac_exeext=$EXEEXT ++{ echo "$as_me:$LINENO: checking for suffix of object files" >&5 ++echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; } ++if test "${ac_cv_objext+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.o conftest.obj ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ for ac_file in conftest.o conftest.obj conftest.*; do ++ test -f "$ac_file" || continue; ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;; ++ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` ++ break;; ++ esac ++done ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile ++See \`config.log' for more details." >&5 ++echo "$as_me: error: cannot compute suffix of object files: cannot compile ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++rm -f conftest.$ac_cv_objext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 ++echo "${ECHO_T}$ac_cv_objext" >&6; } ++OBJEXT=$ac_cv_objext ++ac_objext=$OBJEXT ++{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 ++echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } ++if test "${ac_cv_c_compiler_gnu+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++#ifndef __GNUC__ ++ choke me ++#endif ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_compiler_gnu=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_compiler_gnu=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ac_cv_c_compiler_gnu=$ac_compiler_gnu ++ ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 ++echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } ++GCC=`test $ac_compiler_gnu = yes && echo yes` ++ac_test_CFLAGS=${CFLAGS+set} ++ac_save_CFLAGS=$CFLAGS ++{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 ++echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } ++if test "${ac_cv_prog_cc_g+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_save_c_werror_flag=$ac_c_werror_flag ++ ac_c_werror_flag=yes ++ ac_cv_prog_cc_g=no ++ CFLAGS="-g" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_prog_cc_g=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ CFLAGS="" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ : ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_c_werror_flag=$ac_save_c_werror_flag ++ CFLAGS="-g" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_prog_cc_g=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ac_c_werror_flag=$ac_save_c_werror_flag ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 ++echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } ++if test "$ac_test_CFLAGS" = set; then ++ CFLAGS=$ac_save_CFLAGS ++elif test $ac_cv_prog_cc_g = yes; then ++ if test "$GCC" = yes; then ++ CFLAGS="-g -O2" ++ else ++ CFLAGS="-g" ++ fi ++else ++ if test "$GCC" = yes; then ++ CFLAGS="-O2" ++ else ++ CFLAGS= ++ fi ++fi ++{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 ++echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } ++if test "${ac_cv_prog_cc_c89+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_cv_prog_cc_c89=no ++ac_save_CC=$CC ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++#include ++#include ++#include ++/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ ++struct buf { int x; }; ++FILE * (*rcsopen) (struct buf *, struct stat *, int); ++static char *e (p, i) ++ char **p; ++ int i; ++{ ++ return p[i]; ++} ++static char *f (char * (*g) (char **, int), char **p, ...) ++{ ++ char *s; ++ va_list v; ++ va_start (v,p); ++ s = g (p, va_arg (v,int)); ++ va_end (v); ++ return s; ++} ++ ++/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has ++ function prototypes and stuff, but not '\xHH' hex character constants. ++ These don't provoke an error unfortunately, instead are silently treated ++ as 'x'. The following induces an error, until -std is added to get ++ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an ++ array size at least. It's necessary to write '\x00'==0 to get something ++ that's true only with -std. */ ++int osf4_cc_array ['\x00' == 0 ? 1 : -1]; ++ ++/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters ++ inside strings and character constants. */ ++#define FOO(x) 'x' ++int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; ++ ++int test (int i, double x); ++struct s1 {int (*f) (int a);}; ++struct s2 {int (*f) (double a);}; ++int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); ++int argc; ++char **argv; ++int ++main () ++{ ++return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ++ ; ++ return 0; ++} ++_ACEOF ++for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ ++ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" ++do ++ CC="$ac_save_CC $ac_arg" ++ rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_prog_cc_c89=$ac_arg ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext ++ test "x$ac_cv_prog_cc_c89" != "xno" && break ++done ++rm -f conftest.$ac_ext ++CC=$ac_save_CC ++ ++fi ++# AC_CACHE_VAL ++case "x$ac_cv_prog_cc_c89" in ++ x) ++ { echo "$as_me:$LINENO: result: none needed" >&5 ++echo "${ECHO_T}none needed" >&6; } ;; ++ xno) ++ { echo "$as_me:$LINENO: result: unsupported" >&5 ++echo "${ECHO_T}unsupported" >&6; } ;; ++ *) ++ CC="$CC $ac_cv_prog_cc_c89" ++ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 ++echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; ++esac ++ ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++DEPDIR="${am__leading_dot}deps" ++ ++ac_config_commands="$ac_config_commands depfiles" ++ ++ ++am_make=${MAKE-make} ++cat > confinc << 'END' ++am__doit: ++ @echo done ++.PHONY: am__doit ++END ++# If we don't find an include directive, just comment out the code. ++{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 ++echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; } ++am__include="#" ++am__quote= ++_am_result=none ++# First try GNU make style include. ++echo "include confinc" > confmf ++# We grep out `Entering directory' and `Leaving directory' ++# messages which can occur if `w' ends up in MAKEFLAGS. ++# In particular we don't look at `^make:' because GNU make might ++# be invoked under some other name (usually "gmake"), in which ++# case it prints its new name instead of `make'. ++if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then ++ am__include=include ++ am__quote= ++ _am_result=GNU ++fi ++# Now try BSD make style include. ++if test "$am__include" = "#"; then ++ echo '.include "confinc"' > confmf ++ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then ++ am__include=.include ++ am__quote="\"" ++ _am_result=BSD ++ fi ++fi ++ ++ ++{ echo "$as_me:$LINENO: result: $_am_result" >&5 ++echo "${ECHO_T}$_am_result" >&6; } ++rm -f confinc confmf ++ ++# Check whether --enable-dependency-tracking was given. ++if test "${enable_dependency_tracking+set}" = set; then ++ enableval=$enable_dependency_tracking; ++fi ++ ++if test "x$enable_dependency_tracking" != xno; then ++ am_depcomp="$ac_aux_dir/depcomp" ++ AMDEPBACKSLASH='\' ++fi ++ ++ ++if test "x$enable_dependency_tracking" != xno; then ++ AMDEP_TRUE= ++ AMDEP_FALSE='#' ++else ++ AMDEP_TRUE='#' ++ AMDEP_FALSE= ++fi ++ ++ ++ ++ ++depcc="$CC" am_compiler_list= ++ ++{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 ++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } ++if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then ++ # We make a subdir and do the tests there. Otherwise we can end up ++ # making bogus files that we don't know about and never remove. For ++ # instance it was reported that on HP-UX the gcc test will end up ++ # making a dummy file named `D' -- because `-MD' means `put the output ++ # in D'. ++ mkdir conftest.dir ++ # Copy depcomp to subdir because otherwise we won't find it if we're ++ # using a relative directory. ++ cp "$am_depcomp" conftest.dir ++ cd conftest.dir ++ # We will build objects and dependencies in a subdirectory because ++ # it helps to detect inapplicable dependency modes. For instance ++ # both Tru64's cc and ICC support -MD to output dependencies as a ++ # side effect of compilation, but ICC will put the dependencies in ++ # the current directory while Tru64 will put them in the object ++ # directory. ++ mkdir sub ++ ++ am_cv_CC_dependencies_compiler_type=none ++ if test "$am_compiler_list" = ""; then ++ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` ++ fi ++ for depmode in $am_compiler_list; do ++ # Setup a source with many dependencies, because some compilers ++ # like to wrap large dependency lists on column 80 (with \), and ++ # we should not choose a depcomp mode which is confused by this. ++ # ++ # We need to recreate these files for each test, as the compiler may ++ # overwrite some of them when testing with obscure command lines. ++ # This happens at least with the AIX C compiler. ++ : > sub/conftest.c ++ for i in 1 2 3 4 5 6; do ++ echo '#include "conftst'$i'.h"' >> sub/conftest.c ++ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with ++ # Solaris 8's {/usr,}/bin/sh. ++ touch sub/conftst$i.h ++ done ++ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf ++ ++ case $depmode in ++ nosideeffect) ++ # after this tag, mechanisms are not by side-effect, so they'll ++ # only be used when explicitly requested ++ if test "x$enable_dependency_tracking" = xyes; then ++ continue ++ else ++ break ++ fi ++ ;; ++ none) break ;; ++ esac ++ # We check with `-c' and `-o' for the sake of the "dashmstdout" ++ # mode. It turns out that the SunPro C++ compiler does not properly ++ # handle `-M -o', and we need to detect this. ++ if depmode=$depmode \ ++ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ ++ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ ++ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ ++ >/dev/null 2>conftest.err && ++ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && ++ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then ++ # icc doesn't choke on unknown options, it will just issue warnings ++ # or remarks (even with -Werror). So we grep stderr for any message ++ # that says an option was ignored or not supported. ++ # When given -MP, icc 7.0 and 7.1 complain thusly: ++ # icc: Command line warning: ignoring option '-M'; no argument required ++ # The diagnosis changed in icc 8.0: ++ # icc: Command line remark: option '-MP' not supported ++ if (grep 'ignoring option' conftest.err || ++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else ++ am_cv_CC_dependencies_compiler_type=$depmode ++ break ++ fi ++ fi ++ done ++ ++ cd .. ++ rm -rf conftest.dir ++else ++ am_cv_CC_dependencies_compiler_type=none ++fi ++ ++fi ++{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 ++echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } ++CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type ++ ++ ++ ++if ++ test "x$enable_dependency_tracking" != xno \ ++ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then ++ am__fastdepCC_TRUE= ++ am__fastdepCC_FALSE='#' ++else ++ am__fastdepCC_TRUE='#' ++ am__fastdepCC_FALSE= ++fi ++ ++ ++if test "x$CC" != xcc; then ++ { echo "$as_me:$LINENO: checking whether $CC and cc understand -c and -o together" >&5 ++echo $ECHO_N "checking whether $CC and cc understand -c and -o together... $ECHO_C" >&6; } ++else ++ { echo "$as_me:$LINENO: checking whether cc understands -c and -o together" >&5 ++echo $ECHO_N "checking whether cc understands -c and -o together... $ECHO_C" >&6; } ++fi ++set dummy $CC; ac_cc=`echo $2 | ++ sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` ++if { as_var=ac_cv_prog_cc_${ac_cc}_c_o; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++# Make sure it works both with $CC and with simple cc. ++# We do the test twice because some compilers refuse to overwrite an ++# existing .o file with -o, though they will create one. ++ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5' ++rm -f conftest2.* ++if { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ test -f conftest2.$ac_objext && { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; ++then ++ eval ac_cv_prog_cc_${ac_cc}_c_o=yes ++ if test "x$CC" != xcc; then ++ # Test first that cc exists at all. ++ if { ac_try='cc -c conftest.$ac_ext >&5' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5' ++ rm -f conftest2.* ++ if { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ test -f conftest2.$ac_objext && { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; ++ then ++ # cc works too. ++ : ++ else ++ # cc exists but doesn't like -o. ++ eval ac_cv_prog_cc_${ac_cc}_c_o=no ++ fi ++ fi ++ fi ++else ++ eval ac_cv_prog_cc_${ac_cc}_c_o=no ++fi ++rm -f core conftest* ++ ++fi ++if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define NO_MINUS_C_MINUS_O 1 ++_ACEOF ++ ++fi ++ ++# FIXME: we rely on the cache variable name because ++# there is no other way. ++set dummy $CC ++ac_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` ++if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" != yes"; then ++ # Losing compiler, so override with the script. ++ # FIXME: It is wrong to rewrite CC. ++ # But if we don't then we get into trouble of one sort or another. ++ # A longer-term fix would be to have automake use am__CC in this case, ++ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" ++ CC="$am_aux_dir/compile $CC" ++fi ++ ++ ++# Find a good install program. We prefer a C program (faster), ++# so one script is as good as another. But avoid the broken or ++# incompatible versions: ++# SysV /etc/install, /usr/sbin/install ++# SunOS /usr/etc/install ++# IRIX /sbin/install ++# AIX /bin/install ++# AmigaOS /C/install, which installs bootblocks on floppy discs ++# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag ++# AFS /usr/afsws/bin/install, which mishandles nonexistent args ++# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" ++# OS/2's system install, which has a completely different semantic ++# ./install, which can be erroneously created by make from ./install.sh. ++{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 ++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } ++if test -z "$INSTALL"; then ++if test "${ac_cv_path_install+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ # Account for people who put trailing slashes in PATH elements. ++case $as_dir/ in ++ ./ | .// | /cC/* | \ ++ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ++ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ ++ /usr/ucb/* ) ;; ++ *) ++ # OSF1 and SCO ODT 3.0 have their own names for install. ++ # Don't use installbsd from OSF since it installs stuff as root ++ # by default. ++ for ac_prog in ginstall scoinst install; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then ++ if test $ac_prog = install && ++ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then ++ # AIX install. It has an incompatible calling convention. ++ : ++ elif test $ac_prog = install && ++ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then ++ # program-specific install script used by HP pwplus--don't use. ++ : ++ else ++ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" ++ break 3 ++ fi ++ fi ++ done ++ done ++ ;; ++esac ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ if test "${ac_cv_path_install+set}" = set; then ++ INSTALL=$ac_cv_path_install ++ else ++ # As a last resort, use the slow shell script. Don't cache a ++ # value for INSTALL within a source directory, because that will ++ # break other packages using the cache if that directory is ++ # removed, or if the value is a relative name. ++ INSTALL=$ac_install_sh ++ fi ++fi ++{ echo "$as_me:$LINENO: result: $INSTALL" >&5 ++echo "${ECHO_T}$INSTALL" >&6; } ++ ++# Use test -z because SunOS4 sh mishandles braces in ${var-val}. ++# It thinks the first close brace ends the variable substitution. ++test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' ++ ++test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' ++ ++test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' ++ ++case `pwd` in ++ *\ * | *\ *) ++ { echo "$as_me:$LINENO: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 ++echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; ++esac ++ ++ ++ ++macro_version='2.2.4' ++macro_revision='1.2976' ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ltmain="$ac_aux_dir/ltmain.sh" ++ ++# Make sure we can run config.sub. ++$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || ++ { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 ++echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} ++ { (exit 1); exit 1; }; } ++ ++{ echo "$as_me:$LINENO: checking build system type" >&5 ++echo $ECHO_N "checking build system type... $ECHO_C" >&6; } ++if test "${ac_cv_build+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_build_alias=$build_alias ++test "x$ac_build_alias" = x && ++ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` ++test "x$ac_build_alias" = x && ++ { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 ++echo "$as_me: error: cannot guess build type; you must specify one" >&2;} ++ { (exit 1); exit 1; }; } ++ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} ++ { (exit 1); exit 1; }; } ++ ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5 ++echo "${ECHO_T}$ac_cv_build" >&6; } ++case $ac_cv_build in ++*-*-*) ;; ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 ++echo "$as_me: error: invalid value of canonical build" >&2;} ++ { (exit 1); exit 1; }; };; ++esac ++build=$ac_cv_build ++ac_save_IFS=$IFS; IFS='-' ++set x $ac_cv_build ++shift ++build_cpu=$1 ++build_vendor=$2 ++shift; shift ++# Remember, the first character of IFS is used to create $*, ++# except with old shells: ++build_os=$* ++IFS=$ac_save_IFS ++case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac ++ ++ ++{ echo "$as_me:$LINENO: checking host system type" >&5 ++echo $ECHO_N "checking host system type... $ECHO_C" >&6; } ++if test "${ac_cv_host+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test "x$host_alias" = x; then ++ ac_cv_host=$ac_cv_build ++else ++ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5 ++echo "${ECHO_T}$ac_cv_host" >&6; } ++case $ac_cv_host in ++*-*-*) ;; ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 ++echo "$as_me: error: invalid value of canonical host" >&2;} ++ { (exit 1); exit 1; }; };; ++esac ++host=$ac_cv_host ++ac_save_IFS=$IFS; IFS='-' ++set x $ac_cv_host ++shift ++host_cpu=$1 ++host_vendor=$2 ++shift; shift ++# Remember, the first character of IFS is used to create $*, ++# except with old shells: ++host_os=$* ++IFS=$ac_save_IFS ++case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac ++ ++ ++{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 ++echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; } ++if test "${ac_cv_path_SED+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ ++ for ac_i in 1 2 3 4 5 6 7; do ++ ac_script="$ac_script$as_nl$ac_script" ++ done ++ echo "$ac_script" | sed 99q >conftest.sed ++ $as_unset ac_script || ac_script= ++ # Extract the first word of "sed gsed" to use in msg output ++if test -z "$SED"; then ++set dummy sed gsed; ac_prog_name=$2 ++if test "${ac_cv_path_SED+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_path_SED_found=false ++# Loop through the user's path and test for each of PROGNAME-LIST ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in sed gsed; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue ++ # Check for GNU ac_path_SED and select it if it is found. ++ # Check for GNU $ac_path_SED ++case `"$ac_path_SED" --version 2>&1` in ++*GNU*) ++ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; ++*) ++ ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ echo '' >> "conftest.nl" ++ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ ac_count=`expr $ac_count + 1` ++ if test $ac_count -gt ${ac_path_SED_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_SED="$ac_path_SED" ++ ac_path_SED_max=$ac_count ++ fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ ++ $ac_path_SED_found && break 3 ++ done ++done ++ ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ ++SED="$ac_cv_path_SED" ++if test -z "$SED"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in \$PATH" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in \$PATH" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++else ++ ac_cv_path_SED=$SED ++fi ++ ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5 ++echo "${ECHO_T}$ac_cv_path_SED" >&6; } ++ SED="$ac_cv_path_SED" ++ rm -f conftest.sed ++ ++test -z "$SED" && SED=sed ++Xsed="$SED -e 1s/^X//" ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 ++echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; } ++if test "${ac_cv_path_GREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ # Extract the first word of "grep ggrep" to use in msg output ++if test -z "$GREP"; then ++set dummy grep ggrep; ac_prog_name=$2 ++if test "${ac_cv_path_GREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_path_GREP_found=false ++# Loop through the user's path and test for each of PROGNAME-LIST ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in grep ggrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue ++ # Check for GNU ac_path_GREP and select it if it is found. ++ # Check for GNU $ac_path_GREP ++case `"$ac_path_GREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; ++*) ++ ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ echo 'GREP' >> "conftest.nl" ++ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ ac_count=`expr $ac_count + 1` ++ if test $ac_count -gt ${ac_path_GREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_GREP="$ac_path_GREP" ++ ac_path_GREP_max=$ac_count ++ fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ ++ $ac_path_GREP_found && break 3 ++ done ++done ++ ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ ++GREP="$ac_cv_path_GREP" ++if test -z "$GREP"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++else ++ ac_cv_path_GREP=$GREP ++fi ++ ++ ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 ++echo "${ECHO_T}$ac_cv_path_GREP" >&6; } ++ GREP="$ac_cv_path_GREP" ++ ++ ++{ echo "$as_me:$LINENO: checking for egrep" >&5 ++echo $ECHO_N "checking for egrep... $ECHO_C" >&6; } ++if test "${ac_cv_path_EGREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 ++ then ac_cv_path_EGREP="$GREP -E" ++ else ++ # Extract the first word of "egrep" to use in msg output ++if test -z "$EGREP"; then ++set dummy egrep; ac_prog_name=$2 ++if test "${ac_cv_path_EGREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_path_EGREP_found=false ++# Loop through the user's path and test for each of PROGNAME-LIST ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in egrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue ++ # Check for GNU ac_path_EGREP and select it if it is found. ++ # Check for GNU $ac_path_EGREP ++case `"$ac_path_EGREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; ++*) ++ ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ echo 'EGREP' >> "conftest.nl" ++ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ ac_count=`expr $ac_count + 1` ++ if test $ac_count -gt ${ac_path_EGREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_EGREP="$ac_path_EGREP" ++ ac_path_EGREP_max=$ac_count ++ fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ ++ $ac_path_EGREP_found && break 3 ++ done ++done ++ ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ ++EGREP="$ac_cv_path_EGREP" ++if test -z "$EGREP"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++else ++ ac_cv_path_EGREP=$EGREP ++fi ++ ++ ++ fi ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 ++echo "${ECHO_T}$ac_cv_path_EGREP" >&6; } ++ EGREP="$ac_cv_path_EGREP" ++ ++ ++{ echo "$as_me:$LINENO: checking for fgrep" >&5 ++echo $ECHO_N "checking for fgrep... $ECHO_C" >&6; } ++if test "${ac_cv_path_FGREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 ++ then ac_cv_path_FGREP="$GREP -F" ++ else ++ # Extract the first word of "fgrep" to use in msg output ++if test -z "$FGREP"; then ++set dummy fgrep; ac_prog_name=$2 ++if test "${ac_cv_path_FGREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_path_FGREP_found=false ++# Loop through the user's path and test for each of PROGNAME-LIST ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in fgrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue ++ # Check for GNU ac_path_FGREP and select it if it is found. ++ # Check for GNU $ac_path_FGREP ++case `"$ac_path_FGREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; ++*) ++ ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ echo 'FGREP' >> "conftest.nl" ++ "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ ac_count=`expr $ac_count + 1` ++ if test $ac_count -gt ${ac_path_FGREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_FGREP="$ac_path_FGREP" ++ ac_path_FGREP_max=$ac_count ++ fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ ++ $ac_path_FGREP_found && break 3 ++ done ++done ++ ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ ++FGREP="$ac_cv_path_FGREP" ++if test -z "$FGREP"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++else ++ ac_cv_path_FGREP=$FGREP ++fi ++ ++ ++ fi ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5 ++echo "${ECHO_T}$ac_cv_path_FGREP" >&6; } ++ FGREP="$ac_cv_path_FGREP" ++ ++ ++test -z "$GREP" && GREP=grep ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++# Check whether --with-gnu-ld was given. ++if test "${with_gnu_ld+set}" = set; then ++ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes ++else ++ with_gnu_ld=no ++fi ++ ++ac_prog=ld ++if test "$GCC" = yes; then ++ # Check if gcc -print-prog-name=ld gives a path. ++ { echo "$as_me:$LINENO: checking for ld used by $CC" >&5 ++echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; } ++ case $host in ++ *-*-mingw*) ++ # gcc leaves a trailing carriage return which upsets mingw ++ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; ++ *) ++ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; ++ esac ++ case $ac_prog in ++ # Accept absolute paths. ++ [\\/]* | ?:[\\/]*) ++ re_direlt='/[^/][^/]*/\.\./' ++ # Canonicalize the pathname of ld ++ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` ++ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ++ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` ++ done ++ test -z "$LD" && LD="$ac_prog" ++ ;; ++ "") ++ # If it fails, then pretend we aren't using GCC. ++ ac_prog=ld ++ ;; ++ *) ++ # If it is relative, then search for the first ld in PATH. ++ with_gnu_ld=unknown ++ ;; ++ esac ++elif test "$with_gnu_ld" = yes; then ++ { echo "$as_me:$LINENO: checking for GNU ld" >&5 ++echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; } ++else ++ { echo "$as_me:$LINENO: checking for non-GNU ld" >&5 ++echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; } ++fi ++if test "${lt_cv_path_LD+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -z "$LD"; then ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then ++ lt_cv_path_LD="$ac_dir/$ac_prog" ++ # Check to see if the program is GNU ld. I'd rather use --version, ++ # but apparently some variants of GNU ld only accept -v. ++ # Break only if it was the GNU/non-GNU ld that we prefer. ++ case `"$lt_cv_path_LD" -v 2>&1 &5 ++echo "${ECHO_T}$LD" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 ++echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} ++ { (exit 1); exit 1; }; } ++{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 ++echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; } ++if test "${lt_cv_prog_gnu_ld+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ # I'd rather use --version here, but apparently some GNU lds only accept -v. ++case `$LD -v 2>&1 &5 ++echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; } ++with_gnu_ld=$lt_cv_prog_gnu_ld ++ ++ ++ ++ ++ ++ ++ ++ ++ ++{ echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5 ++echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6; } ++if test "${lt_cv_path_NM+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$NM"; then ++ # Let the user override the test. ++ lt_cv_path_NM="$NM" ++else ++ lt_nm_to_check="${ac_tool_prefix}nm" ++ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then ++ lt_nm_to_check="$lt_nm_to_check nm" ++ fi ++ for lt_tmp_nm in $lt_nm_to_check; do ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ tmp_nm="$ac_dir/$lt_tmp_nm" ++ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then ++ # Check to see if the nm accepts a BSD-compat flag. ++ # Adding the `sed 1q' prevents false positives on HP-UX, which says: ++ # nm: unknown option "B" ignored ++ # Tru64's nm complains that /dev/null is an invalid object file ++ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in ++ */dev/null* | *'Invalid file or object type'*) ++ lt_cv_path_NM="$tmp_nm -B" ++ break ++ ;; ++ *) ++ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in ++ */dev/null*) ++ lt_cv_path_NM="$tmp_nm -p" ++ break ++ ;; ++ *) ++ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but ++ continue # so that we can try to find one that supports BSD flags ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ done ++ IFS="$lt_save_ifs" ++ done ++ : ${lt_cv_path_NM=no} ++fi ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 ++echo "${ECHO_T}$lt_cv_path_NM" >&6; } ++if test "$lt_cv_path_NM" != "no"; then ++ NM="$lt_cv_path_NM" ++else ++ # Didn't find any BSD compatible name lister, look for dumpbin. ++ if test -n "$ac_tool_prefix"; then ++ for ac_prog in "dumpbin -symbols" "link -dump -symbols" ++ do ++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. ++set dummy $ac_tool_prefix$ac_prog; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_DUMPBIN+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$DUMPBIN"; then ++ ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++DUMPBIN=$ac_cv_prog_DUMPBIN ++if test -n "$DUMPBIN"; then ++ { echo "$as_me:$LINENO: result: $DUMPBIN" >&5 ++echo "${ECHO_T}$DUMPBIN" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ test -n "$DUMPBIN" && break ++ done ++fi ++if test -z "$DUMPBIN"; then ++ ac_ct_DUMPBIN=$DUMPBIN ++ for ac_prog in "dumpbin -symbols" "link -dump -symbols" ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_DUMPBIN"; then ++ ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN ++if test -n "$ac_ct_DUMPBIN"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5 ++echo "${ECHO_T}$ac_ct_DUMPBIN" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ test -n "$ac_ct_DUMPBIN" && break ++done ++ ++ if test "x$ac_ct_DUMPBIN" = x; then ++ DUMPBIN=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ DUMPBIN=$ac_ct_DUMPBIN ++ fi ++fi ++ ++ ++ if test "$DUMPBIN" != ":"; then ++ NM="$DUMPBIN" ++ fi ++fi ++test -z "$NM" && NM=nm ++ ++ ++ ++ ++ ++ ++{ echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5 ++echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6; } ++if test "${lt_cv_nm_interface+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_nm_interface="BSD nm" ++ echo "int some_variable = 0;" > conftest.$ac_ext ++ (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&5) ++ (eval "$ac_compile" 2>conftest.err) ++ cat conftest.err >&5 ++ (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&5) ++ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) ++ cat conftest.err >&5 ++ (eval echo "\"\$as_me:__oline__: output\"" >&5) ++ cat conftest.out >&5 ++ if $GREP 'External.*some_variable' conftest.out > /dev/null; then ++ lt_cv_nm_interface="MS dumpbin" ++ fi ++ rm -f conftest* ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5 ++echo "${ECHO_T}$lt_cv_nm_interface" >&6; } ++ ++{ echo "$as_me:$LINENO: checking whether ln -s works" >&5 ++echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; } ++LN_S=$as_ln_s ++if test "$LN_S" = "ln -s"; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no, using $LN_S" >&5 ++echo "${ECHO_T}no, using $LN_S" >&6; } ++fi ++ ++# find the maximum length of command line arguments ++{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 ++echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; } ++if test "${lt_cv_sys_max_cmd_len+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ i=0 ++ teststring="ABCD" ++ ++ case $build_os in ++ msdosdjgpp*) ++ # On DJGPP, this test can blow up pretty badly due to problems in libc ++ # (any single argument exceeding 2000 bytes causes a buffer overrun ++ # during glob expansion). Even if it were fixed, the result of this ++ # check would be larger than it should be. ++ lt_cv_sys_max_cmd_len=12288; # 12K is about right ++ ;; ++ ++ gnu*) ++ # Under GNU Hurd, this test is not required because there is ++ # no limit to the length of command line arguments. ++ # Libtool will interpret -1 as no limit whatsoever ++ lt_cv_sys_max_cmd_len=-1; ++ ;; ++ ++ cygwin* | mingw*) ++ # On Win9x/ME, this test blows up -- it succeeds, but takes ++ # about 5 minutes as the teststring grows exponentially. ++ # Worse, since 9x/ME are not pre-emptively multitasking, ++ # you end up with a "frozen" computer, even though with patience ++ # the test eventually succeeds (with a max line length of 256k). ++ # Instead, let's just punt: use the minimum linelength reported by ++ # all of the supported platforms: 8192 (on NT/2K/XP). ++ lt_cv_sys_max_cmd_len=8192; ++ ;; ++ ++ amigaos*) ++ # On AmigaOS with pdksh, this test takes hours, literally. ++ # So we just punt and use a minimum line length of 8192. ++ lt_cv_sys_max_cmd_len=8192; ++ ;; ++ ++ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) ++ # This has been around since 386BSD, at least. Likely further. ++ if test -x /sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` ++ elif test -x /usr/sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` ++ else ++ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs ++ fi ++ # And add a safety zone ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ ;; ++ ++ interix*) ++ # We know the value 262144 and hardcode it with a safety zone (like BSD) ++ lt_cv_sys_max_cmd_len=196608 ++ ;; ++ ++ osf*) ++ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure ++ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not ++ # nice to cause kernel panics so lets avoid the loop below. ++ # First set a reasonable default. ++ lt_cv_sys_max_cmd_len=16384 ++ # ++ if test -x /sbin/sysconfig; then ++ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in ++ *1*) lt_cv_sys_max_cmd_len=-1 ;; ++ esac ++ fi ++ ;; ++ sco3.2v5*) ++ lt_cv_sys_max_cmd_len=102400 ++ ;; ++ sysv5* | sco5v6* | sysv4.2uw2*) ++ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` ++ if test -n "$kargmax"; then ++ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` ++ else ++ lt_cv_sys_max_cmd_len=32768 ++ fi ++ ;; ++ *) ++ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` ++ if test -n "$lt_cv_sys_max_cmd_len"; then ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ else ++ # Make teststring a little bigger before we do anything with it. ++ # a 1K string should be a reasonable start. ++ for i in 1 2 3 4 5 6 7 8 ; do ++ teststring=$teststring$teststring ++ done ++ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} ++ # If test is not a shell built-in, we'll probably end up computing a ++ # maximum length that is only half of the actual maximum length, but ++ # we can't tell. ++ while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ ++ = "XX$teststring$teststring"; } >/dev/null 2>&1 && ++ test $i != 17 # 1/2 MB should be enough ++ do ++ i=`expr $i + 1` ++ teststring=$teststring$teststring ++ done ++ # Only check the string length outside the loop. ++ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` ++ teststring= ++ # Add a significant safety factor because C++ compilers can tack on ++ # massive amounts of additional arguments before passing them to the ++ # linker. It appears as though 1/2 is a usable value. ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` ++ fi ++ ;; ++ esac ++ ++fi ++ ++if test -n $lt_cv_sys_max_cmd_len ; then ++ { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 ++echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; } ++else ++ { echo "$as_me:$LINENO: result: none" >&5 ++echo "${ECHO_T}none" >&6; } ++fi ++max_cmd_len=$lt_cv_sys_max_cmd_len ++ ++ ++ ++ ++ ++ ++: ${CP="cp -f"} ++: ${MV="mv -f"} ++: ${RM="rm -f"} ++ ++{ echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5 ++echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6; } ++# Try some XSI features ++xsi_shell=no ++( _lt_dummy="a/b/c" ++ test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ ++ = c,a/b,, \ ++ && eval 'test $(( 1 + 1 )) -eq 2 \ ++ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ ++ && xsi_shell=yes ++{ echo "$as_me:$LINENO: result: $xsi_shell" >&5 ++echo "${ECHO_T}$xsi_shell" >&6; } ++ ++ ++{ echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5 ++echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6; } ++lt_shell_append=no ++( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ ++ >/dev/null 2>&1 \ ++ && lt_shell_append=yes ++{ echo "$as_me:$LINENO: result: $lt_shell_append" >&5 ++echo "${ECHO_T}$lt_shell_append" >&6; } ++ ++ ++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then ++ lt_unset=unset ++else ++ lt_unset=false ++fi ++ ++ ++ ++ ++ ++# test EBCDIC or ASCII ++case `echo X|tr X '\101'` in ++ A) # ASCII based system ++ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr ++ lt_SP2NL='tr \040 \012' ++ lt_NL2SP='tr \015\012 \040\040' ++ ;; ++ *) # EBCDIC based system ++ lt_SP2NL='tr \100 \n' ++ lt_NL2SP='tr \r\n \100\100' ++ ;; ++esac ++ ++ ++ ++ ++ ++ ++ ++ ++ ++{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 ++echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; } ++if test "${lt_cv_ld_reload_flag+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_ld_reload_flag='-r' ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 ++echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; } ++reload_flag=$lt_cv_ld_reload_flag ++case $reload_flag in ++"" | " "*) ;; ++*) reload_flag=" $reload_flag" ;; ++esac ++reload_cmds='$LD$reload_flag -o $output$reload_objs' ++case $host_os in ++ darwin*) ++ if test "$GCC" = yes; then ++ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' ++ else ++ reload_cmds='$LD$reload_flag -o $output$reload_objs' ++ fi ++ ;; ++esac ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 ++echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; } ++if test "${lt_cv_deplibs_check_method+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_file_magic_cmd='$MAGIC_CMD' ++lt_cv_file_magic_test_file= ++lt_cv_deplibs_check_method='unknown' ++# Need to set the preceding variable on all platforms that support ++# interlibrary dependencies. ++# 'none' -- dependencies not supported. ++# `unknown' -- same as none, but documents that we really don't know. ++# 'pass_all' -- all dependencies passed with no checks. ++# 'test_compile' -- check by making test program. ++# 'file_magic [[regex]]' -- check by looking for files in library path ++# which responds to the $file_magic_cmd with a given extended regex. ++# If you have `file' or equivalent on your system and you're not sure ++# whether `pass_all' will *always* work, you probably want this one. ++ ++case $host_os in ++aix[4-9]*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++beos*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++bsdi[45]*) ++ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' ++ lt_cv_file_magic_cmd='/usr/bin/file -L' ++ lt_cv_file_magic_test_file=/shlib/libc.so ++ ;; ++ ++cygwin*) ++ # func_win32_libid is a shell function defined in ltmain.sh ++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' ++ lt_cv_file_magic_cmd='func_win32_libid' ++ ;; ++ ++mingw* | pw32*) ++ # Base MSYS/MinGW do not provide the 'file' command needed by ++ # func_win32_libid shell function, so use a weaker test based on 'objdump', ++ # unless we find 'file', for example because we are cross-compiling. ++ if ( file / ) >/dev/null 2>&1; then ++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' ++ lt_cv_file_magic_cmd='func_win32_libid' ++ else ++ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' ++ lt_cv_file_magic_cmd='$OBJDUMP -f' ++ fi ++ ;; ++ ++darwin* | rhapsody*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++freebsd* | dragonfly*) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then ++ case $host_cpu in ++ i*86 ) ++ # Not sure whether the presence of OpenBSD here was a mistake. ++ # Let's accept both of them until this is cleared up. ++ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' ++ lt_cv_file_magic_cmd=/usr/bin/file ++ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ++ ;; ++ esac ++ else ++ lt_cv_deplibs_check_method=pass_all ++ fi ++ ;; ++ ++gnu*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++hpux10.20* | hpux11*) ++ lt_cv_file_magic_cmd=/usr/bin/file ++ case $host_cpu in ++ ia64*) ++ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' ++ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ++ ;; ++ hppa*64*) ++ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' ++ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ++ ;; ++ *) ++ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' ++ lt_cv_file_magic_test_file=/usr/lib/libc.sl ++ ;; ++ esac ++ ;; ++ ++interix[3-9]*) ++ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' ++ ;; ++ ++irix5* | irix6* | nonstopux*) ++ case $LD in ++ *-32|*"-32 ") libmagic=32-bit;; ++ *-n32|*"-n32 ") libmagic=N32;; ++ *-64|*"-64 ") libmagic=64-bit;; ++ *) libmagic=never-match;; ++ esac ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++# This must be Linux ELF. ++linux* | k*bsd*-gnu) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' ++ else ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' ++ fi ++ ;; ++ ++newos6*) ++ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' ++ lt_cv_file_magic_cmd=/usr/bin/file ++ lt_cv_file_magic_test_file=/usr/lib/libnls.so ++ ;; ++ ++*nto* | *qnx*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++openbsd*) ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' ++ else ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' ++ fi ++ ;; ++ ++osf3* | osf4* | osf5*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++rdos*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++solaris*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++sysv4 | sysv4.3*) ++ case $host_vendor in ++ motorola) ++ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' ++ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ++ ;; ++ ncr) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ sequent) ++ lt_cv_file_magic_cmd='/bin/file' ++ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ++ ;; ++ sni) ++ lt_cv_file_magic_cmd='/bin/file' ++ lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" ++ lt_cv_file_magic_test_file=/lib/libc.so ++ ;; ++ siemens) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ pc) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ esac ++ ;; ++ ++tpf*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++esac ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 ++echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; } ++file_magic_cmd=$lt_cv_file_magic_cmd ++deplibs_check_method=$lt_cv_deplibs_check_method ++test -z "$deplibs_check_method" && deplibs_check_method=unknown ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. ++set dummy ${ac_tool_prefix}ar; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_AR+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$AR"; then ++ ac_cv_prog_AR="$AR" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_AR="${ac_tool_prefix}ar" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++AR=$ac_cv_prog_AR ++if test -n "$AR"; then ++ { echo "$as_me:$LINENO: result: $AR" >&5 ++echo "${ECHO_T}$AR" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_AR"; then ++ ac_ct_AR=$AR ++ # Extract the first word of "ar", so it can be a program name with args. ++set dummy ar; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_AR+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_AR"; then ++ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_AR="ar" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_AR=$ac_cv_prog_ac_ct_AR ++if test -n "$ac_ct_AR"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 ++echo "${ECHO_T}$ac_ct_AR" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_AR" = x; then ++ AR="false" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ AR=$ac_ct_AR ++ fi ++else ++ AR="$ac_cv_prog_AR" ++fi ++ ++test -z "$AR" && AR=ar ++test -z "$AR_FLAGS" && AR_FLAGS=cru ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. ++set dummy ${ac_tool_prefix}strip; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_STRIP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$STRIP"; then ++ ac_cv_prog_STRIP="$STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_STRIP="${ac_tool_prefix}strip" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++STRIP=$ac_cv_prog_STRIP ++if test -n "$STRIP"; then ++ { echo "$as_me:$LINENO: result: $STRIP" >&5 ++echo "${ECHO_T}$STRIP" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_STRIP"; then ++ ac_ct_STRIP=$STRIP ++ # Extract the first word of "strip", so it can be a program name with args. ++set dummy strip; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_STRIP"; then ++ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_STRIP="strip" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP ++if test -n "$ac_ct_STRIP"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 ++echo "${ECHO_T}$ac_ct_STRIP" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_STRIP" = x; then ++ STRIP=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ STRIP=$ac_ct_STRIP ++ fi ++else ++ STRIP="$ac_cv_prog_STRIP" ++fi ++ ++test -z "$STRIP" && STRIP=: ++ ++ ++ ++ ++ ++ ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. ++set dummy ${ac_tool_prefix}ranlib; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_RANLIB+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$RANLIB"; then ++ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++RANLIB=$ac_cv_prog_RANLIB ++if test -n "$RANLIB"; then ++ { echo "$as_me:$LINENO: result: $RANLIB" >&5 ++echo "${ECHO_T}$RANLIB" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_RANLIB"; then ++ ac_ct_RANLIB=$RANLIB ++ # Extract the first word of "ranlib", so it can be a program name with args. ++set dummy ranlib; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_RANLIB"; then ++ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_RANLIB="ranlib" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB ++if test -n "$ac_ct_RANLIB"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 ++echo "${ECHO_T}$ac_ct_RANLIB" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_RANLIB" = x; then ++ RANLIB=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ RANLIB=$ac_ct_RANLIB ++ fi ++else ++ RANLIB="$ac_cv_prog_RANLIB" ++fi ++ ++test -z "$RANLIB" && RANLIB=: ++ ++ ++ ++ ++ ++ ++# Determine commands to create old-style static archives. ++old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' ++old_postinstall_cmds='chmod 644 $oldlib' ++old_postuninstall_cmds= ++ ++if test -n "$RANLIB"; then ++ case $host_os in ++ openbsd*) ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" ++ ;; ++ *) ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" ++ ;; ++ esac ++ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} ++ ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++ ++# Allow CC to be a program name with arguments. ++compiler=$CC ++ ++ ++# Check for command to grab the raw symbol name followed by C symbol from nm. ++{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 ++echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; } ++if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ++# These are sane defaults that work on at least a few old systems. ++# [They come from Ultrix. What could be older than Ultrix?!! ;)] ++ ++# Character class describing NM global symbol codes. ++symcode='[BCDEGRST]' ++ ++# Regexp to match symbols that can be accessed directly from C. ++sympat='\([_A-Za-z][_A-Za-z0-9]*\)' ++ ++# Define system-specific variables. ++case $host_os in ++aix*) ++ symcode='[BCDT]' ++ ;; ++cygwin* | mingw* | pw32*) ++ symcode='[ABCDGISTW]' ++ ;; ++hpux*) ++ if test "$host_cpu" = ia64; then ++ symcode='[ABCDEGRST]' ++ fi ++ ;; ++irix* | nonstopux*) ++ symcode='[BCDEGRST]' ++ ;; ++osf*) ++ symcode='[BCDEGQRST]' ++ ;; ++solaris*) ++ symcode='[BDRT]' ++ ;; ++sco3.2v5*) ++ symcode='[DT]' ++ ;; ++sysv4.2uw2*) ++ symcode='[DT]' ++ ;; ++sysv5* | sco5v6* | unixware* | OpenUNIX*) ++ symcode='[ABDT]' ++ ;; ++sysv4) ++ symcode='[DFNSTU]' ++ ;; ++esac ++ ++# If we're using GNU nm, then use its standard symbol codes. ++case `$NM -V 2>&1` in ++*GNU* | *'with BFD'*) ++ symcode='[ABCDGIRSTW]' ;; ++esac ++ ++# Transform an extracted symbol line into a proper C declaration. ++# Some systems (esp. on ia64) link data and code symbols differently, ++# so use this general approach. ++lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" ++ ++# Transform an extracted symbol line into symbol name and symbol address ++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" ++ ++# Handle CRLF in mingw tool chain ++opt_cr= ++case $build_os in ++mingw*) ++ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ++ ;; ++esac ++ ++# Try without a prefix underscore, then with it. ++for ac_symprfx in "" "_"; do ++ ++ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. ++ symxfrm="\\1 $ac_symprfx\\2 \\2" ++ ++ # Write the raw and C identifiers. ++ if test "$lt_cv_nm_interface" = "MS dumpbin"; then ++ # Fake it for dumpbin and say T for any non-static function ++ # and D for any global variable. ++ # Also find C++ and __fastcall symbols from MSVC++, ++ # which start with @ or ?. ++ lt_cv_sys_global_symbol_pipe="$AWK '"\ ++" {last_section=section; section=\$ 3};"\ ++" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ ++" \$ 0!~/External *\|/{next};"\ ++" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ ++" {if(hide[section]) next};"\ ++" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ ++" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ ++" s[1]~/^[@?]/{print s[1], s[1]; next};"\ ++" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ ++" ' prfx=^$ac_symprfx" ++ else ++ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" ++ fi ++ ++ # Check to see that the pipe works correctly. ++ pipe_works=no ++ ++ rm -f conftest* ++ cat > conftest.$ac_ext <<_LT_EOF ++#ifdef __cplusplus ++extern "C" { ++#endif ++char nm_test_var; ++void nm_test_func(void); ++void nm_test_func(void){} ++#ifdef __cplusplus ++} ++#endif ++int main(){nm_test_var='a';nm_test_func();return(0);} ++_LT_EOF ++ ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ # Now try to grab the symbols. ++ nlist=conftest.nm ++ if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 ++ (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && test -s "$nlist"; then ++ # Try sorting and uniquifying the output. ++ if sort "$nlist" | uniq > "$nlist"T; then ++ mv -f "$nlist"T "$nlist" ++ else ++ rm -f "$nlist"T ++ fi ++ ++ # Make sure that we snagged all the symbols we need. ++ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then ++ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then ++ cat <<_LT_EOF > conftest.$ac_ext ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++_LT_EOF ++ # Now generate the symbol file. ++ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' ++ ++ cat <<_LT_EOF >> conftest.$ac_ext ++ ++/* The mapping between symbol names and symbols. */ ++const struct { ++ const char *name; ++ void *address; ++} ++lt__PROGRAM__LTX_preloaded_symbols[] = ++{ ++ { "@PROGRAM@", (void *) 0 }, ++_LT_EOF ++ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext ++ cat <<\_LT_EOF >> conftest.$ac_ext ++ {0, (void *) 0} ++}; ++ ++/* This works around a problem in FreeBSD linker */ ++#ifdef FREEBSD_WORKAROUND ++static const void *lt_preloaded_setup() { ++ return lt__PROGRAM__LTX_preloaded_symbols; ++} ++#endif ++ ++#ifdef __cplusplus ++} ++#endif ++_LT_EOF ++ # Now try linking the two files. ++ mv conftest.$ac_objext conftstm.$ac_objext ++ lt_save_LIBS="$LIBS" ++ lt_save_CFLAGS="$CFLAGS" ++ LIBS="conftstm.$ac_objext" ++ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" ++ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && test -s conftest${ac_exeext}; then ++ pipe_works=yes ++ fi ++ LIBS="$lt_save_LIBS" ++ CFLAGS="$lt_save_CFLAGS" ++ else ++ echo "cannot find nm_test_func in $nlist" >&5 ++ fi ++ else ++ echo "cannot find nm_test_var in $nlist" >&5 ++ fi ++ else ++ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 ++ fi ++ else ++ echo "$progname: failed program was:" >&5 ++ cat conftest.$ac_ext >&5 ++ fi ++ rm -rf conftest* conftst* ++ ++ # Do not use the global_symbol_pipe unless it works. ++ if test "$pipe_works" = yes; then ++ break ++ else ++ lt_cv_sys_global_symbol_pipe= ++ fi ++done ++ ++fi ++ ++if test -z "$lt_cv_sys_global_symbol_pipe"; then ++ lt_cv_sys_global_symbol_to_cdecl= ++fi ++if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then ++ { echo "$as_me:$LINENO: result: failed" >&5 ++echo "${ECHO_T}failed" >&6; } ++else ++ { echo "$as_me:$LINENO: result: ok" >&5 ++echo "${ECHO_T}ok" >&6; } ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++# Check whether --enable-libtool-lock was given. ++if test "${enable_libtool_lock+set}" = set; then ++ enableval=$enable_libtool_lock; ++fi ++ ++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes ++ ++# Some flags need to be propagated to the compiler or linker for good ++# libtool support. ++case $host in ++ia64-*-hpux*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ case `/usr/bin/file conftest.$ac_objext` in ++ *ELF-32*) ++ HPUX_IA64_MODE="32" ++ ;; ++ *ELF-64*) ++ HPUX_IA64_MODE="64" ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; ++*-*-irix6*) ++ # Find out which ABI we are using. ++ echo '#line __oline__ "configure"' > conftest.$ac_ext ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ case `/usr/bin/file conftest.$ac_objext` in ++ *32-bit*) ++ LD="${LD-ld} -melf32bsmip" ++ ;; ++ *N32*) ++ LD="${LD-ld} -melf32bmipn32" ++ ;; ++ *64-bit*) ++ LD="${LD-ld} -melf64bmip" ++ ;; ++ esac ++ else ++ case `/usr/bin/file conftest.$ac_objext` in ++ *32-bit*) ++ LD="${LD-ld} -32" ++ ;; ++ *N32*) ++ LD="${LD-ld} -n32" ++ ;; ++ *64-bit*) ++ LD="${LD-ld} -64" ++ ;; ++ esac ++ fi ++ fi ++ rm -rf conftest* ++ ;; ++ ++x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ ++s390*-*linux*|s390*-*tpf*|sparc*-*linux*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ case `/usr/bin/file conftest.o` in ++ *32-bit*) ++ case $host in ++ x86_64-*kfreebsd*-gnu) ++ LD="${LD-ld} -m elf_i386_fbsd" ++ ;; ++ x86_64-*linux*) ++ LD="${LD-ld} -m elf_i386" ++ ;; ++ ppc64-*linux*|powerpc64-*linux*) ++ LD="${LD-ld} -m elf32ppclinux" ++ ;; ++ s390x-*linux*) ++ LD="${LD-ld} -m elf_s390" ++ ;; ++ sparc64-*linux*) ++ LD="${LD-ld} -m elf32_sparc" ++ ;; ++ esac ++ ;; ++ *64-bit*) ++ case $host in ++ x86_64-*kfreebsd*-gnu) ++ LD="${LD-ld} -m elf_x86_64_fbsd" ++ ;; ++ x86_64-*linux*) ++ LD="${LD-ld} -m elf_x86_64" ++ ;; ++ ppc*-*linux*|powerpc*-*linux*) ++ LD="${LD-ld} -m elf64ppc" ++ ;; ++ s390*-*linux*|s390*-*tpf*) ++ LD="${LD-ld} -m elf64_s390" ++ ;; ++ sparc*-*linux*) ++ LD="${LD-ld} -m elf64_sparc" ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; ++ ++*-*-sco3.2v5*) ++ # On SCO OpenServer 5, we need -belf to get full-featured binaries. ++ SAVE_CFLAGS="$CFLAGS" ++ CFLAGS="$CFLAGS -belf" ++ { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 ++echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; } ++if test "${lt_cv_cc_needs_belf+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ lt_cv_cc_needs_belf=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ lt_cv_cc_needs_belf=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 ++echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; } ++ if test x"$lt_cv_cc_needs_belf" != x"yes"; then ++ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf ++ CFLAGS="$SAVE_CFLAGS" ++ fi ++ ;; ++sparc*-*solaris*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ case `/usr/bin/file conftest.o` in ++ *64-bit*) ++ case $lt_cv_prog_gnu_ld in ++ yes*) LD="${LD-ld} -m elf64_sparc" ;; ++ *) ++ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then ++ LD="${LD-ld} -64" ++ fi ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; ++esac ++ ++need_locks="$enable_libtool_lock" ++ ++ ++ case $host_os in ++ rhapsody* | darwin*) ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. ++set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_DSYMUTIL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$DSYMUTIL"; then ++ ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++DSYMUTIL=$ac_cv_prog_DSYMUTIL ++if test -n "$DSYMUTIL"; then ++ { echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 ++echo "${ECHO_T}$DSYMUTIL" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_DSYMUTIL"; then ++ ac_ct_DSYMUTIL=$DSYMUTIL ++ # Extract the first word of "dsymutil", so it can be a program name with args. ++set dummy dsymutil; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_DSYMUTIL"; then ++ ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL ++if test -n "$ac_ct_DSYMUTIL"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 ++echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_DSYMUTIL" = x; then ++ DSYMUTIL=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ DSYMUTIL=$ac_ct_DSYMUTIL ++ fi ++else ++ DSYMUTIL="$ac_cv_prog_DSYMUTIL" ++fi ++ ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. ++set dummy ${ac_tool_prefix}nmedit; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_NMEDIT+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$NMEDIT"; then ++ ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++NMEDIT=$ac_cv_prog_NMEDIT ++if test -n "$NMEDIT"; then ++ { echo "$as_me:$LINENO: result: $NMEDIT" >&5 ++echo "${ECHO_T}$NMEDIT" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_NMEDIT"; then ++ ac_ct_NMEDIT=$NMEDIT ++ # Extract the first word of "nmedit", so it can be a program name with args. ++set dummy nmedit; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_NMEDIT"; then ++ ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_NMEDIT="nmedit" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT ++if test -n "$ac_ct_NMEDIT"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 ++echo "${ECHO_T}$ac_ct_NMEDIT" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_NMEDIT" = x; then ++ NMEDIT=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ NMEDIT=$ac_ct_NMEDIT ++ fi ++else ++ NMEDIT="$ac_cv_prog_NMEDIT" ++fi ++ ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. ++set dummy ${ac_tool_prefix}lipo; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_LIPO+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$LIPO"; then ++ ac_cv_prog_LIPO="$LIPO" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_LIPO="${ac_tool_prefix}lipo" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++LIPO=$ac_cv_prog_LIPO ++if test -n "$LIPO"; then ++ { echo "$as_me:$LINENO: result: $LIPO" >&5 ++echo "${ECHO_T}$LIPO" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_LIPO"; then ++ ac_ct_LIPO=$LIPO ++ # Extract the first word of "lipo", so it can be a program name with args. ++set dummy lipo; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_LIPO"; then ++ ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_LIPO="lipo" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO ++if test -n "$ac_ct_LIPO"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5 ++echo "${ECHO_T}$ac_ct_LIPO" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_LIPO" = x; then ++ LIPO=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ LIPO=$ac_ct_LIPO ++ fi ++else ++ LIPO="$ac_cv_prog_LIPO" ++fi ++ ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. ++set dummy ${ac_tool_prefix}otool; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_OTOOL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$OTOOL"; then ++ ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_OTOOL="${ac_tool_prefix}otool" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++OTOOL=$ac_cv_prog_OTOOL ++if test -n "$OTOOL"; then ++ { echo "$as_me:$LINENO: result: $OTOOL" >&5 ++echo "${ECHO_T}$OTOOL" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_OTOOL"; then ++ ac_ct_OTOOL=$OTOOL ++ # Extract the first word of "otool", so it can be a program name with args. ++set dummy otool; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_OTOOL"; then ++ ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_OTOOL="otool" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL ++if test -n "$ac_ct_OTOOL"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5 ++echo "${ECHO_T}$ac_ct_OTOOL" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_OTOOL" = x; then ++ OTOOL=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ OTOOL=$ac_ct_OTOOL ++ fi ++else ++ OTOOL="$ac_cv_prog_OTOOL" ++fi ++ ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. ++set dummy ${ac_tool_prefix}otool64; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_OTOOL64+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$OTOOL64"; then ++ ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++OTOOL64=$ac_cv_prog_OTOOL64 ++if test -n "$OTOOL64"; then ++ { echo "$as_me:$LINENO: result: $OTOOL64" >&5 ++echo "${ECHO_T}$OTOOL64" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_OTOOL64"; then ++ ac_ct_OTOOL64=$OTOOL64 ++ # Extract the first word of "otool64", so it can be a program name with args. ++set dummy otool64; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_OTOOL64"; then ++ ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_OTOOL64="otool64" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 ++if test -n "$ac_ct_OTOOL64"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5 ++echo "${ECHO_T}$ac_ct_OTOOL64" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_OTOOL64" = x; then ++ OTOOL64=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ OTOOL64=$ac_ct_OTOOL64 ++ fi ++else ++ OTOOL64="$ac_cv_prog_OTOOL64" ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ { echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 ++echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6; } ++if test "${lt_cv_apple_cc_single_mod+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_apple_cc_single_mod=no ++ if test -z "${LT_MULTI_MODULE}"; then ++ # By default we will add the -single_module flag. You can override ++ # by either setting the environment variable LT_MULTI_MODULE ++ # non-empty at configure time, or by adding -multi_module to the ++ # link flags. ++ rm -rf libconftest.dylib* ++ echo "int foo(void){return 1;}" > conftest.c ++ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ ++-dynamiclib -Wl,-single_module conftest.c" >&5 ++ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ ++ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err ++ _lt_result=$? ++ if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then ++ lt_cv_apple_cc_single_mod=yes ++ else ++ cat conftest.err >&5 ++ fi ++ rm -rf libconftest.dylib* ++ rm -f conftest.* ++ fi ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 ++echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6; } ++ { echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 ++echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6; } ++if test "${lt_cv_ld_exported_symbols_list+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_ld_exported_symbols_list=no ++ save_LDFLAGS=$LDFLAGS ++ echo "_main" > conftest.sym ++ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ lt_cv_ld_exported_symbols_list=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ lt_cv_ld_exported_symbols_list=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ LDFLAGS="$save_LDFLAGS" ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 ++echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6; } ++ case $host_os in ++ rhapsody* | darwin1.[012]) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; ++ darwin1.*) ++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; ++ darwin*) # darwin 5.x on ++ # if running on 10.5 or later, the deployment target defaults ++ # to the OS version, if on x86, and 10.4, the deployment ++ # target defaults to 10.4. Don't you love it? ++ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in ++ 10.0,*86*-darwin8*|10.0,*-darwin[91]*) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; ++ 10.[012]*) ++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; ++ 10.*) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; ++ esac ++ ;; ++ esac ++ if test "$lt_cv_apple_cc_single_mod" = "yes"; then ++ _lt_dar_single_mod='$single_module' ++ fi ++ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then ++ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' ++ else ++ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ fi ++ if test "$DSYMUTIL" != ":"; then ++ _lt_dsymutil='~$DSYMUTIL $lib || :' ++ else ++ _lt_dsymutil= ++ fi ++ ;; ++ esac ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 ++echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; } ++# On Suns, sometimes $CPP names a directory. ++if test -n "$CPP" && test -d "$CPP"; then ++ CPP= ++fi ++if test -z "$CPP"; then ++ if test "${ac_cv_prog_CPP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ # Double quotes because CPP needs to be expanded ++ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" ++ do ++ ac_preproc_ok=false ++for ac_c_preproc_warn_flag in '' yes ++do ++ # Use a header file that comes with gcc, so configuring glibc ++ # with a fresh cross-compiler works. ++ # Prefer to if __STDC__ is defined, since ++ # exists even on freestanding compilers. ++ # On the NeXT, cc -E runs the code through the compiler's parser, ++ # not just through cpp. "Syntax error" is here to catch this case. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++@%:@ifdef __STDC__ ++@%:@ include ++@%:@else ++@%:@ include ++@%:@endif ++ Syntax error ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ : ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ # Broken: fails on valid input. ++continue ++fi ++ ++rm -f conftest.err conftest.$ac_ext ++ ++ # OK, works on sane cases. Now check whether nonexistent headers ++ # can be detected and how. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++@%:@include ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ # Broken: success on invalid input. ++continue ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ # Passes both tests. ++ac_preproc_ok=: ++break ++fi ++ ++rm -f conftest.err conftest.$ac_ext ++ ++done ++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. ++rm -f conftest.err conftest.$ac_ext ++if $ac_preproc_ok; then ++ break ++fi ++ ++ done ++ ac_cv_prog_CPP=$CPP ++ ++fi ++ CPP=$ac_cv_prog_CPP ++else ++ ac_cv_prog_CPP=$CPP ++fi ++{ echo "$as_me:$LINENO: result: $CPP" >&5 ++echo "${ECHO_T}$CPP" >&6; } ++ac_preproc_ok=false ++for ac_c_preproc_warn_flag in '' yes ++do ++ # Use a header file that comes with gcc, so configuring glibc ++ # with a fresh cross-compiler works. ++ # Prefer to if __STDC__ is defined, since ++ # exists even on freestanding compilers. ++ # On the NeXT, cc -E runs the code through the compiler's parser, ++ # not just through cpp. "Syntax error" is here to catch this case. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++@%:@ifdef __STDC__ ++@%:@ include ++@%:@else ++@%:@ include ++@%:@endif ++ Syntax error ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ : ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ # Broken: fails on valid input. ++continue ++fi ++ ++rm -f conftest.err conftest.$ac_ext ++ ++ # OK, works on sane cases. Now check whether nonexistent headers ++ # can be detected and how. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++@%:@include ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ # Broken: success on invalid input. ++continue ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ # Passes both tests. ++ac_preproc_ok=: ++break ++fi ++ ++rm -f conftest.err conftest.$ac_ext ++ ++done ++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. ++rm -f conftest.err conftest.$ac_ext ++if $ac_preproc_ok; then ++ : ++else ++ { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check ++See \`config.log' for more details." >&5 ++echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++ ++{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5 ++echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } ++if test "${ac_cv_header_stdc+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++#include ++#include ++#include ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_header_stdc=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_header_stdc=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++if test $ac_cv_header_stdc = yes; then ++ # SunOS 4.x string.h does not declare mem*, contrary to ANSI. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++ ++_ACEOF ++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | ++ $EGREP "memchr" >/dev/null 2>&1; then ++ : ++else ++ ac_cv_header_stdc=no ++fi ++rm -f conftest* ++ ++fi ++ ++if test $ac_cv_header_stdc = yes; then ++ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++ ++_ACEOF ++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | ++ $EGREP "free" >/dev/null 2>&1; then ++ : ++else ++ ac_cv_header_stdc=no ++fi ++rm -f conftest* ++ ++fi ++ ++if test $ac_cv_header_stdc = yes; then ++ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. ++ if test "$cross_compiling" = yes; then ++ : ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++#include ++#if ((' ' & 0x0FF) == 0x020) ++# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') ++# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) ++#else ++# define ISLOWER(c) \ ++ (('a' <= (c) && (c) <= 'i') \ ++ || ('j' <= (c) && (c) <= 'r') \ ++ || ('s' <= (c) && (c) <= 'z')) ++# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) ++#endif ++ ++#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) ++int ++main () ++{ ++ int i; ++ for (i = 0; i < 256; i++) ++ if (XOR (islower (i), ISLOWER (i)) ++ || toupper (i) != TOUPPER (i)) ++ return 2; ++ return 0; ++} ++_ACEOF ++rm -f conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ac_try='./conftest$ac_exeext' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ : ++else ++ echo "$as_me: program exited with status $ac_status" >&5 ++echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++( exit $ac_status ) ++ac_cv_header_stdc=no ++fi ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext ++fi ++ ++ ++fi ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 ++echo "${ECHO_T}$ac_cv_header_stdc" >&6; } ++if test $ac_cv_header_stdc = yes; then ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define STDC_HEADERS 1 ++_ACEOF ++ ++fi ++ ++# On IRIX 5.3, sys/types and inttypes.h are conflicting. ++ ++ ++ ++ ++ ++ ++ ++ ++ ++for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ ++ inttypes.h stdint.h unistd.h ++do ++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++$ac_includes_default ++ ++@%:@include <$ac_header> ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ eval "$as_ac_Header=yes" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ eval "$as_ac_Header=no" ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++if test `eval echo '${'$as_ac_Header'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++@%:@define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++_ACEOF ++ ++fi ++ ++done ++ ++ ++ ++for ac_header in dlfcn.h ++do ++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++$ac_includes_default ++ ++@%:@include <$ac_header> ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ eval "$as_ac_Header=yes" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ eval "$as_ac_Header=no" ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++if test `eval echo '${'$as_ac_Header'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++@%:@define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++_ACEOF ++ ++fi ++ ++done ++ ++ ++ ++# Set options ++ ++ ++ ++ enable_dlopen=no ++ ++ ++ enable_win32_dll=no ++ ++ ++ # Check whether --enable-shared was given. ++if test "${enable_shared+set}" = set; then ++ enableval=$enable_shared; p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_shared=yes ;; ++ no) enable_shared=no ;; ++ *) ++ enable_shared=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_shared=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac ++else ++ enable_shared=yes ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ # Check whether --enable-static was given. ++if test "${enable_static+set}" = set; then ++ enableval=$enable_static; p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_static=yes ;; ++ no) enable_static=no ;; ++ *) ++ enable_static=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_static=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac ++else ++ enable_static=yes ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++# Check whether --with-pic was given. ++if test "${with_pic+set}" = set; then ++ withval=$with_pic; pic_mode="$withval" ++else ++ pic_mode=default ++fi ++ ++ ++test -z "$pic_mode" && pic_mode=default ++ ++ ++ ++ ++ ++ ++ ++ # Check whether --enable-fast-install was given. ++if test "${enable_fast_install+set}" = set; then ++ enableval=$enable_fast_install; p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_fast_install=yes ;; ++ no) enable_fast_install=no ;; ++ *) ++ enable_fast_install=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_fast_install=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac ++else ++ enable_fast_install=yes ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++# This can be used to rebuild libtool when needed ++LIBTOOL_DEPS="$ltmain" ++ ++# Always use our own libtool. ++LIBTOOL='$(SHELL) $(top_builddir)/libtool' ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++test -z "$LN_S" && LN_S="ln -s" ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++fi ++ ++{ echo "$as_me:$LINENO: checking for objdir" >&5 ++echo $ECHO_N "checking for objdir... $ECHO_C" >&6; } ++if test "${lt_cv_objdir+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ rm -f .libs 2>/dev/null ++mkdir .libs 2>/dev/null ++if test -d .libs; then ++ lt_cv_objdir=.libs ++else ++ # MS-DOS does not allow filenames that begin with a dot. ++ lt_cv_objdir=_libs ++fi ++rmdir .libs 2>/dev/null ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 ++echo "${ECHO_T}$lt_cv_objdir" >&6; } ++objdir=$lt_cv_objdir ++ ++ ++ ++ ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define LT_OBJDIR "$lt_cv_objdir/" ++_ACEOF ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++case $host_os in ++aix3*) ++ # AIX sometimes has problems with the GCC collect2 program. For some ++ # reason, if we set the COLLECT_NAMES environment variable, the problems ++ # vanish in a puff of smoke. ++ if test "X${COLLECT_NAMES+set}" != Xset; then ++ COLLECT_NAMES= ++ export COLLECT_NAMES ++ fi ++ ;; ++esac ++ ++# Sed substitution that helps us do robust quoting. It backslashifies ++# metacharacters that are still active within double-quoted strings. ++sed_quote_subst='s/\(["`$\\]\)/\\\1/g' ++ ++# Same as above, but do not quote variable references. ++double_quote_subst='s/\(["`\\]\)/\\\1/g' ++ ++# Sed substitution to delay expansion of an escaped shell variable in a ++# double_quote_subst'ed string. ++delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' ++ ++# Sed substitution to delay expansion of an escaped single quote. ++delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' ++ ++# Sed substitution to avoid accidental globbing in evaled expressions ++no_glob_subst='s/\*/\\\*/g' ++ ++# Global variables: ++ofile=libtool ++can_build_shared=yes ++ ++# All known linkers require a `.a' archive for static linking (except MSVC, ++# which needs '.lib'). ++libext=a ++ ++with_gnu_ld="$lt_cv_prog_gnu_ld" ++ ++old_CC="$CC" ++old_CFLAGS="$CFLAGS" ++ ++# Set sane defaults for various variables ++test -z "$CC" && CC=cc ++test -z "$LTCC" && LTCC=$CC ++test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS ++test -z "$LD" && LD=ld ++test -z "$ac_objext" && ac_objext=o ++ ++for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++ ++ ++# Only perform the check for file, if the check method requires it ++test -z "$MAGIC_CMD" && MAGIC_CMD=file ++case $deplibs_check_method in ++file_magic*) ++ if test "$file_magic_cmd" = '$MAGIC_CMD'; then ++ { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 ++echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; } ++if test "${lt_cv_path_MAGIC_CMD+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $MAGIC_CMD in ++[\\/*] | ?:[\\/]*) ++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ++ ;; ++*) ++ lt_save_MAGIC_CMD="$MAGIC_CMD" ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" ++ for ac_dir in $ac_dummy; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/${ac_tool_prefix}file; then ++ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" ++ if test -n "$file_magic_test_file"; then ++ case $deplibs_check_method in ++ "file_magic "*) ++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` ++ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | ++ $EGREP "$file_magic_regex" > /dev/null; then ++ : ++ else ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: the command libtool uses to detect shared libraries, ++*** $file_magic_cmd, produces output that libtool cannot recognize. ++*** The result is that libtool may fail to recognize shared libraries ++*** as such. This will affect the creation of libtool libraries that ++*** depend on shared libraries, but programs linked with such libtool ++*** libraries will work regardless of this problem. Nevertheless, you ++*** may want to report the problem to your system manager and/or to ++*** bug-libtool@gnu.org ++ ++_LT_EOF ++ fi ;; ++ esac ++ fi ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" ++ MAGIC_CMD="$lt_save_MAGIC_CMD" ++ ;; ++esac ++fi ++ ++MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++if test -n "$MAGIC_CMD"; then ++ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 ++echo "${ECHO_T}$MAGIC_CMD" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ ++ ++ ++if test -z "$lt_cv_path_MAGIC_CMD"; then ++ if test -n "$ac_tool_prefix"; then ++ { echo "$as_me:$LINENO: checking for file" >&5 ++echo $ECHO_N "checking for file... $ECHO_C" >&6; } ++if test "${lt_cv_path_MAGIC_CMD+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $MAGIC_CMD in ++[\\/*] | ?:[\\/]*) ++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ++ ;; ++*) ++ lt_save_MAGIC_CMD="$MAGIC_CMD" ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" ++ for ac_dir in $ac_dummy; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/file; then ++ lt_cv_path_MAGIC_CMD="$ac_dir/file" ++ if test -n "$file_magic_test_file"; then ++ case $deplibs_check_method in ++ "file_magic "*) ++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` ++ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | ++ $EGREP "$file_magic_regex" > /dev/null; then ++ : ++ else ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: the command libtool uses to detect shared libraries, ++*** $file_magic_cmd, produces output that libtool cannot recognize. ++*** The result is that libtool may fail to recognize shared libraries ++*** as such. This will affect the creation of libtool libraries that ++*** depend on shared libraries, but programs linked with such libtool ++*** libraries will work regardless of this problem. Nevertheless, you ++*** may want to report the problem to your system manager and/or to ++*** bug-libtool@gnu.org ++ ++_LT_EOF ++ fi ;; ++ esac ++ fi ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" ++ MAGIC_CMD="$lt_save_MAGIC_CMD" ++ ;; ++esac ++fi ++ ++MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++if test -n "$MAGIC_CMD"; then ++ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 ++echo "${ECHO_T}$MAGIC_CMD" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ else ++ MAGIC_CMD=: ++ fi ++fi ++ ++ fi ++ ;; ++esac ++ ++# Use C for the default configuration in the libtool script ++ ++lt_save_CC="$CC" ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++ ++# Source file extension for C test sources. ++ac_ext=c ++ ++# Object file extension for compiled C test sources. ++objext=o ++objext=$objext ++ ++# Code to be used in simple compile tests ++lt_simple_compile_test_code="int some_variable = 0;" ++ ++# Code to be used in simple link tests ++lt_simple_link_test_code='int main(){return(0);}' ++ ++ ++ ++ ++ ++ ++ ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} ++ ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++ ++# Allow CC to be a program name with arguments. ++compiler=$CC ++ ++# Save the default compiler, since it gets overwritten when the other ++# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. ++compiler_DEFAULT=$CC ++ ++# save warnings/boilerplate of simple test code ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_compile_test_code" >conftest.$ac_ext ++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_compiler_boilerplate=`cat conftest.err` ++$RM conftest* ++ ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_link_test_code" >conftest.$ac_ext ++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_linker_boilerplate=`cat conftest.err` ++$RM -r conftest* ++ ++ ++## CAVEAT EMPTOR: ++## There is no encapsulation within the following macros, do not change ++## the running order or otherwise move them around unless you know exactly ++## what you are doing... ++if test -n "$compiler"; then ++ ++lt_prog_compiler_no_builtin_flag= ++ ++if test "$GCC" = yes; then ++ lt_prog_compiler_no_builtin_flag=' -fno-builtin' ++ ++ { echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 ++echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_rtti_exceptions=no ++ ac_outfile=conftest.$ac_objext ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="-fno-rtti -fno-exceptions" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&5 ++ echo "$as_me:__oline__: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_rtti_exceptions=yes ++ fi ++ fi ++ $RM conftest* ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; } ++ ++if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then ++ lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" ++else ++ : ++fi ++ ++fi ++ ++ ++ ++ ++ ++ ++ lt_prog_compiler_wl= ++lt_prog_compiler_pic= ++lt_prog_compiler_static= ++ ++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } ++ ++ if test "$GCC" = yes; then ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_static='-static' ++ ++ case $host_os in ++ aix*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ lt_prog_compiler_static='-Bstatic' ++ fi ++ ;; ++ ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ lt_prog_compiler_pic='-fPIC' ++ ;; ++ m68k) ++ # FIXME: we need at least 68020 code to build shared libraries, but ++ # adding the `-m68020' flag to GCC prevents building anything better, ++ # like `-m68040'. ++ lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' ++ ;; ++ esac ++ ;; ++ ++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ # PIC is the default for these OSes. ++ ;; ++ ++ mingw* | cygwin* | pw32* | os2*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ # Although the cygwin gcc ignores -fPIC, still need this for old-style ++ # (--disable-auto-import) libraries ++ lt_prog_compiler_pic='-DDLL_EXPORT' ++ ;; ++ ++ darwin* | rhapsody*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ lt_prog_compiler_pic='-fno-common' ++ ;; ++ ++ hpux*) ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ lt_prog_compiler_pic='-fPIC' ++ ;; ++ esac ++ ;; ++ ++ interix[3-9]*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; ++ ++ msdosdjgpp*) ++ # Just because we use GCC doesn't mean we suddenly get shared libraries ++ # on systems that don't support them. ++ lt_prog_compiler_can_build_shared=no ++ enable_shared=no ++ ;; ++ ++ *nto* | *qnx*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ lt_prog_compiler_pic='-fPIC -shared' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ lt_prog_compiler_pic=-Kconform_pic ++ fi ++ ;; ++ ++ *) ++ lt_prog_compiler_pic='-fPIC' ++ ;; ++ esac ++ else ++ # PORTME Check for flag to pass linker flags through the system compiler. ++ case $host_os in ++ aix*) ++ lt_prog_compiler_wl='-Wl,' ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ lt_prog_compiler_static='-Bstatic' ++ else ++ lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' ++ fi ++ ;; ++ ++ mingw* | cygwin* | pw32* | os2*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ lt_prog_compiler_pic='-DDLL_EXPORT' ++ ;; ++ ++ hpux9* | hpux10* | hpux11*) ++ lt_prog_compiler_wl='-Wl,' ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ lt_prog_compiler_pic='+Z' ++ ;; ++ esac ++ # Is there a better lt_prog_compiler_static that works with the bundled CC? ++ lt_prog_compiler_static='${wl}-a ${wl}archive' ++ ;; ++ ++ irix5* | irix6* | nonstopux*) ++ lt_prog_compiler_wl='-Wl,' ++ # PIC (with -KPIC) is the default. ++ lt_prog_compiler_static='-non_shared' ++ ;; ++ ++ linux* | k*bsd*-gnu) ++ case $cc_basename in ++ icc* | ecc* | ifort*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-static' ++ ;; ++ pgcc* | pgf77* | pgf90* | pgf95*) ++ # Portland Group compilers (*not* the Pentium gcc compiler, ++ # which looks to be a dead project) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-fpic' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ccc*) ++ lt_prog_compiler_wl='-Wl,' ++ # All Alpha code is PIC. ++ lt_prog_compiler_static='-non_shared' ++ ;; ++ xl*) ++ # IBM XL C 8.0/Fortran 10.1 on PPC ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-qpic' ++ lt_prog_compiler_static='-qstaticlink' ++ ;; ++ *) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C 5.9 ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ lt_prog_compiler_wl='-Wl,' ++ ;; ++ *Sun\ F*) ++ # Sun Fortran 8.3 passes all unrecognized flags to the linker ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ lt_prog_compiler_wl='' ++ ;; ++ esac ++ ;; ++ esac ++ ;; ++ ++ newsos6) ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ++ *nto* | *qnx*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ lt_prog_compiler_pic='-fPIC -shared' ++ ;; ++ ++ osf3* | osf4* | osf5*) ++ lt_prog_compiler_wl='-Wl,' ++ # All OSF/1 code is PIC. ++ lt_prog_compiler_static='-non_shared' ++ ;; ++ ++ rdos*) ++ lt_prog_compiler_static='-non_shared' ++ ;; ++ ++ solaris*) ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ case $cc_basename in ++ f77* | f90* | f95*) ++ lt_prog_compiler_wl='-Qoption ld ';; ++ *) ++ lt_prog_compiler_wl='-Wl,';; ++ esac ++ ;; ++ ++ sunos4*) ++ lt_prog_compiler_wl='-Qoption ld ' ++ lt_prog_compiler_pic='-PIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ++ sysv4 | sysv4.2uw2* | sysv4.3*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec ;then ++ lt_prog_compiler_pic='-Kconform_pic' ++ lt_prog_compiler_static='-Bstatic' ++ fi ++ ;; ++ ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ++ unicos*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_can_build_shared=no ++ ;; ++ ++ uts4*) ++ lt_prog_compiler_pic='-pic' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ++ *) ++ lt_prog_compiler_can_build_shared=no ++ ;; ++ esac ++ fi ++ ++case $host_os in ++ # For platforms which do not support PIC, -DPIC is meaningless: ++ *djgpp*) ++ lt_prog_compiler_pic= ++ ;; ++ *) ++ lt_prog_compiler_pic="$lt_prog_compiler_pic@&t@ -DPIC" ++ ;; ++esac ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic" >&6; } ++ ++ ++ ++ ++ ++ ++# ++# Check to make sure the PIC flag actually works. ++# ++if test -n "$lt_prog_compiler_pic"; then ++ { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_pic_works+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_pic_works=no ++ ac_outfile=conftest.$ac_objext ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="$lt_prog_compiler_pic@&t@ -DPIC" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&5 ++ echo "$as_me:__oline__: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_pic_works=yes ++ fi ++ fi ++ $RM conftest* ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6; } ++ ++if test x"$lt_cv_prog_compiler_pic_works" = xyes; then ++ case $lt_prog_compiler_pic in ++ "" | " "*) ;; ++ *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; ++ esac ++else ++ lt_prog_compiler_pic= ++ lt_prog_compiler_can_build_shared=no ++fi ++ ++fi ++ ++ ++ ++ ++ ++ ++# ++# Check to make sure the static flag actually works. ++# ++wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" ++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_static_works+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_static_works=no ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS $lt_tmp_static_flag" ++ echo "$lt_simple_link_test_code" > conftest.$ac_ext ++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then ++ # The linker can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ if test -s conftest.err; then ++ # Append any errors to the config.log. ++ cat conftest.err 1>&5 ++ $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_static_works=yes ++ fi ++ else ++ lt_cv_prog_compiler_static_works=yes ++ fi ++ fi ++ $RM -r conftest* ++ LDFLAGS="$save_LDFLAGS" ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6; } ++ ++if test x"$lt_cv_prog_compiler_static_works" = xyes; then ++ : ++else ++ lt_prog_compiler_static= ++fi ++ ++ ++ ++ ++ ++ ++ ++ { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_c_o+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_c_o=no ++ $RM -r conftest 2>/dev/null ++ mkdir conftest ++ cd conftest ++ mkdir out ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ lt_compiler_flag="-o out/conftest2.$ac_objext" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>out/conftest.err) ++ ac_status=$? ++ cat out/conftest.err >&5 ++ echo "$as_me:__oline__: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s out/conftest2.$ac_objext ++ then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_c_o=yes ++ fi ++ fi ++ chmod u+w . 2>&5 ++ $RM conftest* ++ # SGI C++ compiler will create directory out/ii_files/ for ++ # template instantiation ++ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files ++ $RM out/* && rmdir out ++ cd .. ++ $RM -r conftest ++ $RM conftest* ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } ++ ++ ++ ++ ++ ++ ++ { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_c_o+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_c_o=no ++ $RM -r conftest 2>/dev/null ++ mkdir conftest ++ cd conftest ++ mkdir out ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ lt_compiler_flag="-o out/conftest2.$ac_objext" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>out/conftest.err) ++ ac_status=$? ++ cat out/conftest.err >&5 ++ echo "$as_me:__oline__: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s out/conftest2.$ac_objext ++ then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_c_o=yes ++ fi ++ fi ++ chmod u+w . 2>&5 ++ $RM conftest* ++ # SGI C++ compiler will create directory out/ii_files/ for ++ # template instantiation ++ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files ++ $RM out/* && rmdir out ++ cd .. ++ $RM -r conftest ++ $RM conftest* ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } ++ ++ ++ ++ ++hard_links="nottested" ++if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then ++ # do not overwrite the value of need_locks provided by the user ++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } ++ hard_links=yes ++ $RM conftest* ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ touch conftest.a ++ ln conftest.a conftest.b 2>&5 || hard_links=no ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ { echo "$as_me:$LINENO: result: $hard_links" >&5 ++echo "${ECHO_T}$hard_links" >&6; } ++ if test "$hard_links" = no; then ++ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 ++echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} ++ need_locks=warn ++ fi ++else ++ need_locks=no ++fi ++ ++ ++ ++ ++ ++ ++ { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } ++ ++ runpath_var= ++ allow_undefined_flag= ++ always_export_symbols=no ++ archive_cmds= ++ archive_expsym_cmds= ++ compiler_needs_object=no ++ enable_shared_with_static_runtimes=no ++ export_dynamic_flag_spec= ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ hardcode_automatic=no ++ hardcode_direct=no ++ hardcode_direct_absolute=no ++ hardcode_libdir_flag_spec= ++ hardcode_libdir_flag_spec_ld= ++ hardcode_libdir_separator= ++ hardcode_minus_L=no ++ hardcode_shlibpath_var=unsupported ++ inherit_rpath=no ++ link_all_deplibs=unknown ++ module_cmds= ++ module_expsym_cmds= ++ old_archive_from_new_cmds= ++ old_archive_from_expsyms_cmds= ++ thread_safe_flag_spec= ++ whole_archive_flag_spec= ++ # include_expsyms should be a list of space-separated symbols to be *always* ++ # included in the symbol list ++ include_expsyms= ++ # exclude_expsyms can be an extended regexp of symbols to exclude ++ # it will be wrapped by ` (' and `)$', so one must not match beginning or ++ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', ++ # as well as any symbol that contains `d'. ++ exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' ++ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out ++ # platforms (ab)use it in PIC code, but their linkers get confused if ++ # the symbol is explicitly referenced. Since portable code cannot ++ # rely on this symbol name, it's probably fine to never include it in ++ # preloaded symbol tables. ++ # Exclude shared library initialization/finalization symbols. ++ extract_expsyms_cmds= ++ ++ case $host_os in ++ cygwin* | mingw* | pw32*) ++ # FIXME: the MSVC++ port hasn't been tested in a loooong time ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ if test "$GCC" != yes; then ++ with_gnu_ld=no ++ fi ++ ;; ++ interix*) ++ # we just hope/assume this is gcc and not c89 (= MSVC++) ++ with_gnu_ld=yes ++ ;; ++ openbsd*) ++ with_gnu_ld=no ++ ;; ++ esac ++ ++ ld_shlibs=yes ++ if test "$with_gnu_ld" = yes; then ++ # If archive_cmds runs LD, not CC, wlarc should be empty ++ wlarc='${wl}' ++ ++ # Set some defaults for GNU ld with shared library support. These ++ # are reset later if shared libraries are not supported. Putting them ++ # here allows them to be overridden if necessary. ++ runpath_var=LD_RUN_PATH ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ export_dynamic_flag_spec='${wl}--export-dynamic' ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then ++ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ whole_archive_flag_spec= ++ fi ++ supports_anon_versioning=no ++ case `$LD -v 2>&1` in ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 ++ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... ++ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... ++ *\ 2.11.*) ;; # other 2.11 versions ++ *) supports_anon_versioning=yes ;; ++ esac ++ ++ # See if GNU ld supports shared libraries. ++ case $host_os in ++ aix[3-9]*) ++ # On AIX/PPC, the GNU linker is very broken ++ if test "$host_cpu" != ia64; then ++ ld_shlibs=no ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: the GNU linker, at least up to release 2.9.1, is reported ++*** to be unable to reliably create shared libraries on AIX. ++*** Therefore, libtool is disabling shared libraries support. If you ++*** really care for shared libraries, you may want to modify your PATH ++*** so that a non-GNU linker is found, and then restart. ++ ++_LT_EOF ++ fi ++ ;; ++ ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='' ++ ;; ++ m68k) ++ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_minus_L=yes ++ ;; ++ esac ++ ;; ++ ++ beos*) ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ allow_undefined_flag=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ ++ cygwin* | mingw* | pw32*) ++ # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, ++ # as there is no search path for DLLs. ++ hardcode_libdir_flag_spec='-L$libdir' ++ allow_undefined_flag=unsupported ++ always_export_symbols=no ++ enable_shared_with_static_runtimes=yes ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' ++ ++ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ # If the export-symbols file already is a .def file (1st line ++ # is EXPORTS), use it as is; otherwise, prepend... ++ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ cp $export_symbols $output_objdir/$soname.def; ++ else ++ echo EXPORTS > $output_objdir/$soname.def; ++ cat $export_symbols >> $output_objdir/$soname.def; ++ fi~ ++ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ ++ interix[3-9]*) ++ hardcode_direct=no ++ hardcode_shlibpath_var=no ++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; ++ ++ gnu* | linux* | tpf* | k*bsd*-gnu) ++ tmp_diet=no ++ if test "$host_os" = linux-dietlibc; then ++ case $cc_basename in ++ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) ++ esac ++ fi ++ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ ++ && test "$tmp_diet" = no ++ then ++ tmp_addflag= ++ tmp_sharedflag='-shared' ++ case $cc_basename,$host_cpu in ++ pgcc*) # Portland Group C compiler ++ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag' ++ ;; ++ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers ++ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag -Mnomain' ;; ++ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 ++ tmp_addflag=' -i_dynamic' ;; ++ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 ++ tmp_addflag=' -i_dynamic -nofor_main' ;; ++ ifc* | ifort*) # Intel Fortran compiler ++ tmp_addflag=' -nofor_main' ;; ++ xl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) ++ tmp_sharedflag='-qmkshrobj' ++ tmp_addflag= ;; ++ esac ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) # Sun C 5.9 ++ whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ compiler_needs_object=yes ++ tmp_sharedflag='-G' ;; ++ *Sun\ F*) # Sun Fortran 8.3 ++ tmp_sharedflag='-G' ;; ++ esac ++ archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ ++ if test "x$supports_anon_versioning" = xyes; then ++ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' ++ fi ++ ++ case $cc_basename in ++ xlf*) ++ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself ++ whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' ++ hardcode_libdir_flag_spec= ++ hardcode_libdir_flag_spec_ld='-rpath $libdir' ++ archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' ++ if test "x$supports_anon_versioning" = xyes; then ++ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' ++ fi ++ ;; ++ esac ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' ++ wlarc= ++ else ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ fi ++ ;; ++ ++ solaris*) ++ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then ++ ld_shlibs=no ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: The releases 2.8.* of the GNU linker cannot reliably ++*** create shared libraries on Solaris systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.9.1 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. ++ ++_LT_EOF ++ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ ++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) ++ case `$LD -v 2>&1` in ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ++ ld_shlibs=no ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not ++*** reliably create shared libraries on SCO systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.16.91.0.3 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. ++ ++_LT_EOF ++ ;; ++ *) ++ # For security reasons, it is highly recommended that you always ++ # use absolute paths for naming shared libraries, and exclude the ++ # DT_RUNPATH tag from executables and libraries. But doing so ++ # requires that you compile everything twice, which is a pain. ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ esac ++ ;; ++ ++ sunos4*) ++ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ wlarc= ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ ;; ++ ++ *) ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ esac ++ ++ if test "$ld_shlibs" = no; then ++ runpath_var= ++ hardcode_libdir_flag_spec= ++ export_dynamic_flag_spec= ++ whole_archive_flag_spec= ++ fi ++ else ++ # PORTME fill in a description of your system's linker (not GNU ld) ++ case $host_os in ++ aix3*) ++ allow_undefined_flag=unsupported ++ always_export_symbols=yes ++ archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' ++ # Note: this linker hardcodes the directories in LIBPATH if there ++ # are no directories specified by -L. ++ hardcode_minus_L=yes ++ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then ++ # Neither direct hardcoding nor static linking is supported with a ++ # broken collect2. ++ hardcode_direct=unsupported ++ fi ++ ;; ++ ++ aix[4-9]*) ++ if test "$host_cpu" = ia64; then ++ # On IA64, the linker does run time linking by default, so we don't ++ # have to do anything special. ++ aix_use_runtimelinking=no ++ exp_sym_flag='-Bexport' ++ no_entry_flag="" ++ else ++ # If we're using GNU nm, then we don't want the "-C" option. ++ # -C means demangle to AIX nm, but means don't demangle with GNU nm ++ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then ++ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ else ++ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ fi ++ aix_use_runtimelinking=no ++ ++ # Test if we are trying to use run time linking or normal ++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we ++ # need to do runtime linking. ++ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) ++ for ld_flag in $LDFLAGS; do ++ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then ++ aix_use_runtimelinking=yes ++ break ++ fi ++ done ++ ;; ++ esac ++ ++ exp_sym_flag='-bexport' ++ no_entry_flag='-bnoentry' ++ fi ++ ++ # When large executables or shared objects are built, AIX ld can ++ # have problems creating the table of contents. If linking a library ++ # or program results in "error TOC overflow" add -mminimal-toc to ++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not ++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. ++ ++ archive_cmds='' ++ hardcode_direct=yes ++ hardcode_direct_absolute=yes ++ hardcode_libdir_separator=':' ++ link_all_deplibs=yes ++ file_list_spec='${wl}-f,' ++ ++ if test "$GCC" = yes; then ++ case $host_os in aix4.[012]|aix4.[012].*) ++ # We only want to do this on AIX 4.2 and lower, the check ++ # below for broken collect2 doesn't work under 4.3+ ++ collect2name=`${CC} -print-prog-name=collect2` ++ if test -f "$collect2name" && ++ strings "$collect2name" | $GREP resolve_lib_name >/dev/null ++ then ++ # We have reworked collect2 ++ : ++ else ++ # We have old collect2 ++ hardcode_direct=unsupported ++ # It fails to find uninstalled libraries when the uninstalled ++ # path is not listed in the libpath. Setting hardcode_minus_L ++ # to unsupported forces relinking ++ hardcode_minus_L=yes ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_libdir_separator= ++ fi ++ ;; ++ esac ++ shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi ++ link_all_deplibs=no ++ else ++ # not using gcc ++ if test "$host_cpu" = ia64; then ++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release ++ # chokes on -Wl,-G. The following line is correct: ++ shared_flag='-G' ++ else ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag='${wl}-G' ++ else ++ shared_flag='${wl}-bM:SRE' ++ fi ++ fi ++ fi ++ ++ # It seems that -bexpall does not export symbols beginning with ++ # underscore (_), so it is better to generate a list of symbols to export. ++ always_export_symbols=yes ++ if test "$aix_use_runtimelinking" = yes; then ++ # Warning - without using the other runtime loading flags (-brtl), ++ # -berok will link without error, but may produce a broken library. ++ allow_undefined_flag='-berok' ++ # Determine the default libpath from the value encoded in an ++ # empty executable. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ++lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *\(.*\)$/\1/ ++ p ++ } ++ }' ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then ++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++fi ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ ++ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" ++ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ else ++ if test "$host_cpu" = ia64; then ++ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' ++ allow_undefined_flag="-z nodefs" ++ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" ++ else ++ # Determine the default libpath from the value encoded in an ++ # empty executable. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ++lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *\(.*\)$/\1/ ++ p ++ } ++ }' ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then ++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++fi ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ ++ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" ++ # Warning - without using the other run time loading flags, ++ # -berok will link without error, but may produce a broken library. ++ no_undefined_flag=' ${wl}-bernotok' ++ allow_undefined_flag=' ${wl}-berok' ++ # Exported symbols can be pulled into shared objects from archives ++ whole_archive_flag_spec='$convenience' ++ archive_cmds_need_lc=yes ++ # This is similar to how AIX traditionally builds its shared libraries. ++ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ fi ++ fi ++ ;; ++ ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='' ++ ;; ++ m68k) ++ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_minus_L=yes ++ ;; ++ esac ++ ;; ++ ++ bsdi[45]*) ++ export_dynamic_flag_spec=-rdynamic ++ ;; ++ ++ cygwin* | mingw* | pw32*) ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ # hardcode_libdir_flag_spec is actually meaningless, as there is ++ # no search path for DLLs. ++ hardcode_libdir_flag_spec=' ' ++ allow_undefined_flag=unsupported ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' ++ # The linker will automatically build a .lib file if we build a DLL. ++ old_archive_from_new_cmds='true' ++ # FIXME: Should let the user specify the lib program. ++ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' ++ fix_srcfile_path='`cygpath -w "$srcfile"`' ++ enable_shared_with_static_runtimes=yes ++ ;; ++ ++ darwin* | rhapsody*) ++ ++ ++ archive_cmds_need_lc=no ++ hardcode_direct=no ++ hardcode_automatic=yes ++ hardcode_shlibpath_var=unsupported ++ whole_archive_flag_spec='' ++ link_all_deplibs=yes ++ allow_undefined_flag="$_lt_dar_allow_undefined" ++ if test "$GCC" = "yes"; then ++ output_verbose_link_cmd=echo ++ archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" ++ module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" ++ archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" ++ module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" ++ ++ else ++ ld_shlibs=no ++ fi ++ ++ ;; ++ ++ dgux*) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_shlibpath_var=no ++ ;; ++ ++ freebsd1*) ++ ld_shlibs=no ++ ;; ++ ++ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor ++ # support. Future versions do this automatically, but an explicit c++rt0.o ++ # does not break anything, and helps significantly (at the cost of a little ++ # extra space). ++ freebsd2.2*) ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ ;; ++ ++ # Unfortunately, older versions of FreeBSD 2 do not have this feature. ++ freebsd2*) ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=yes ++ hardcode_minus_L=yes ++ hardcode_shlibpath_var=no ++ ;; ++ ++ # FreeBSD 3 and greater uses gcc -shared to do shared libraries. ++ freebsd* | dragonfly*) ++ archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ ;; ++ ++ hpux9*) ++ if test "$GCC" = yes; then ++ archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ else ++ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ fi ++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator=: ++ hardcode_direct=yes ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L=yes ++ export_dynamic_flag_spec='${wl}-E' ++ ;; ++ ++ hpux10*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ if test "$with_gnu_ld" = no; then ++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ++ hardcode_libdir_flag_spec_ld='+b $libdir' ++ hardcode_libdir_separator=: ++ hardcode_direct=yes ++ hardcode_direct_absolute=yes ++ export_dynamic_flag_spec='${wl}-E' ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L=yes ++ fi ++ ;; ++ ++ hpux11*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ else ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ fi ++ if test "$with_gnu_ld" = no; then ++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator=: ++ ++ case $host_cpu in ++ hppa*64*|ia64*) ++ hardcode_direct=no ++ hardcode_shlibpath_var=no ++ ;; ++ *) ++ hardcode_direct=yes ++ hardcode_direct_absolute=yes ++ export_dynamic_flag_spec='${wl}-E' ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L=yes ++ ;; ++ esac ++ fi ++ ;; ++ ++ irix5* | irix6* | nonstopux*) ++ if test "$GCC" = yes; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ # Try to use the -exported_symbol ld option, if it does not ++ # work, assume that -exports_file does not work either and ++ # implicitly export all symbols. ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" ++ cat >conftest.$ac_ext <<_ACEOF ++int foo(void) {} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' ++ ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ LDFLAGS="$save_LDFLAGS" ++ else ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' ++ fi ++ archive_cmds_need_lc='no' ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator=: ++ inherit_rpath=yes ++ link_all_deplibs=yes ++ ;; ++ ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out ++ else ++ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF ++ fi ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ ;; ++ ++ newsos6) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=yes ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator=: ++ hardcode_shlibpath_var=no ++ ;; ++ ++ *nto* | *qnx*) ++ ;; ++ ++ openbsd*) ++ if test -f /usr/libexec/ld.so; then ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ hardcode_direct_absolute=yes ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' ++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec='${wl}-E' ++ else ++ case $host_os in ++ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec='-R$libdir' ++ ;; ++ *) ++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ ;; ++ esac ++ fi ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ ++ os2*) ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_minus_L=yes ++ allow_undefined_flag=unsupported ++ archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' ++ old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ++ ;; ++ ++ osf3*) ++ if test "$GCC" = yes; then ++ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ allow_undefined_flag=' -expect_unresolved \*' ++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ fi ++ archive_cmds_need_lc='no' ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator=: ++ ;; ++ ++ osf4* | osf5*) # as osf3* with the addition of -msym flag ++ if test "$GCC" = yes; then ++ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ else ++ allow_undefined_flag=' -expect_unresolved \*' ++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ ++ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' ++ ++ # Both c and cxx compiler support -rpath directly ++ hardcode_libdir_flag_spec='-rpath $libdir' ++ fi ++ archive_cmds_need_lc='no' ++ hardcode_libdir_separator=: ++ ;; ++ ++ solaris*) ++ no_undefined_flag=' -z defs' ++ if test "$GCC" = yes; then ++ wlarc='${wl}' ++ archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ++ else ++ case `$CC -V 2>&1` in ++ *"Compilers 5.0"*) ++ wlarc='' ++ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ++ ;; ++ *) ++ wlarc='${wl}' ++ archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ++ ;; ++ esac ++ fi ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_shlibpath_var=no ++ case $host_os in ++ solaris2.[0-5] | solaris2.[0-5].*) ;; ++ *) ++ # The compiler driver will combine and reorder linker options, ++ # but understands `-z linker_flag'. GCC discards it without `$wl', ++ # but is careful enough not to reorder. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ if test "$GCC" = yes; then ++ whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ++ else ++ whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ++ fi ++ ;; ++ esac ++ link_all_deplibs=yes ++ ;; ++ ++ sunos4*) ++ if test "x$host_vendor" = xsequent; then ++ # Use $CC to link under sequent, because it throws in some extra .o ++ # files that make .init and .fini sections work. ++ archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_direct=yes ++ hardcode_minus_L=yes ++ hardcode_shlibpath_var=no ++ ;; ++ ++ sysv4) ++ case $host_vendor in ++ sni) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=yes # is this really true??? ++ ;; ++ siemens) ++ ## LD is ld it makes a PLAMLIB ++ ## CC just makes a GrossModule. ++ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' ++ reload_cmds='$CC -r -o $output$reload_objs' ++ hardcode_direct=no ++ ;; ++ motorola) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=no #Motorola manual says yes, but my tests say they lie ++ ;; ++ esac ++ runpath_var='LD_RUN_PATH' ++ hardcode_shlibpath_var=no ++ ;; ++ ++ sysv4.3*) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_shlibpath_var=no ++ export_dynamic_flag_spec='-Bexport' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_shlibpath_var=no ++ runpath_var=LD_RUN_PATH ++ hardcode_runpath_var=yes ++ ld_shlibs=yes ++ fi ++ ;; ++ ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) ++ no_undefined_flag='${wl}-z,text' ++ archive_cmds_need_lc=no ++ hardcode_shlibpath_var=no ++ runpath_var='LD_RUN_PATH' ++ ++ if test "$GCC" = yes; then ++ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; ++ ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ no_undefined_flag='${wl}-z,text' ++ allow_undefined_flag='${wl}-z,nodefs' ++ archive_cmds_need_lc=no ++ hardcode_shlibpath_var=no ++ hardcode_libdir_flag_spec='${wl}-R,$libdir' ++ hardcode_libdir_separator=':' ++ link_all_deplibs=yes ++ export_dynamic_flag_spec='${wl}-Bexport' ++ runpath_var='LD_RUN_PATH' ++ ++ if test "$GCC" = yes; then ++ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; ++ ++ uts4*) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_shlibpath_var=no ++ ;; ++ ++ *) ++ ld_shlibs=no ++ ;; ++ esac ++ ++ if test x$host_vendor = xsni; then ++ case $host in ++ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) ++ export_dynamic_flag_spec='${wl}-Blargedynsym' ++ ;; ++ esac ++ fi ++ fi ++ ++{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5 ++echo "${ECHO_T}$ld_shlibs" >&6; } ++test "$ld_shlibs" = no && can_build_shared=no ++ ++with_gnu_ld=$with_gnu_ld ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++# ++# Do we need to explicitly link libc? ++# ++case "x$archive_cmds_need_lc" in ++x|xyes) ++ # Assume -lc should be added ++ archive_cmds_need_lc=yes ++ ++ if test "$enable_shared" = yes && test "$GCC" = yes; then ++ case $archive_cmds in ++ *'~'*) ++ # FIXME: we may have to deal with multi-command sequences. ++ ;; ++ '$CC '*) ++ # Test whether the compiler implicitly links with -lc since on some ++ # systems, -lgcc has to come before -lc. If gcc already passes -lc ++ # to ld, don't add -lc before -lgcc. ++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } ++ $RM conftest* ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } 2>conftest.err; then ++ soname=conftest ++ lib=conftest ++ libobjs=conftest.$ac_objext ++ deplibs= ++ wl=$lt_prog_compiler_wl ++ pic_flag=$lt_prog_compiler_pic ++ compiler_flags=-v ++ linker_flags=-v ++ verstring= ++ output_objdir=. ++ libname=conftest ++ lt_save_allow_undefined_flag=$allow_undefined_flag ++ allow_undefined_flag= ++ if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 ++ (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++ then ++ archive_cmds_need_lc=no ++ else ++ archive_cmds_need_lc=yes ++ fi ++ allow_undefined_flag=$lt_save_allow_undefined_flag ++ else ++ cat conftest.err 1>&5 ++ fi ++ $RM conftest* ++ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 ++echo "${ECHO_T}$archive_cmds_need_lc" >&6; } ++ ;; ++ esac ++ fi ++ ;; ++esac ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ { echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 ++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } ++ ++if test "$GCC" = yes; then ++ case $host_os in ++ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; ++ *) lt_awk_arg="/^libraries:/" ;; ++ esac ++ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then ++ # if the path contains ";" then we assume it to be the separator ++ # otherwise default to the standard path separator (i.e. ":") - it is ++ # assumed that no part of a normal pathname contains ";" but that should ++ # okay in the real world where ";" in dirpaths is itself problematic. ++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ # Ok, now we have the path, separated by spaces, we can step through it ++ # and add multilib dir if necessary. ++ lt_tmp_lt_search_path_spec= ++ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` ++ for lt_sys_path in $lt_search_path_spec; do ++ if test -d "$lt_sys_path/$lt_multi_os_dir"; then ++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" ++ else ++ test -d "$lt_sys_path" && \ ++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" ++ fi ++ done ++ lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' ++BEGIN {RS=" "; FS="/|\n";} { ++ lt_foo=""; ++ lt_count=0; ++ for (lt_i = NF; lt_i > 0; lt_i--) { ++ if ($lt_i != "" && $lt_i != ".") { ++ if ($lt_i == "..") { ++ lt_count++; ++ } else { ++ if (lt_count == 0) { ++ lt_foo="/" $lt_i lt_foo; ++ } else { ++ lt_count--; ++ } ++ } ++ } ++ } ++ if (lt_foo != "") { lt_freq[lt_foo]++; } ++ if (lt_freq[lt_foo] == 1) { print lt_foo; } ++}'` ++ sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` ++else ++ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" ++fi ++library_names_spec= ++libname_spec='lib$name' ++soname_spec= ++shrext_cmds=".so" ++postinstall_cmds= ++postuninstall_cmds= ++finish_cmds= ++finish_eval= ++shlibpath_var= ++shlibpath_overrides_runpath=unknown ++version_type=none ++dynamic_linker="$host_os ld.so" ++sys_lib_dlsearch_path_spec="/lib /usr/lib" ++need_lib_prefix=unknown ++hardcode_into_libs=no ++ ++# when you set need_version to no, make sure it does not cause -set_version ++# flags to be left without arguments ++need_version=unknown ++ ++case $host_os in ++aix3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' ++ shlibpath_var=LIBPATH ++ ++ # AIX 3 has no versioning support, so we append a major version to the name. ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; ++ ++aix[4-9]*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ hardcode_into_libs=yes ++ if test "$host_cpu" = ia64; then ++ # AIX 5 supports IA64 ++ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ else ++ # With GCC up to 2.95.x, collect2 would create an import file ++ # for dependence libraries. The import file would start with ++ # the line `#! .'. This would cause the generated library to ++ # depend on `.', always an invalid library. This was fixed in ++ # development snapshots of GCC prior to 3.0. ++ case $host_os in ++ aix4 | aix4.[01] | aix4.[01].*) ++ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' ++ echo ' yes ' ++ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then ++ : ++ else ++ can_build_shared=no ++ fi ++ ;; ++ esac ++ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct ++ # soname into executable. Probably we can add versioning support to ++ # collect2, so additional links can be useful in future. ++ if test "$aix_use_runtimelinking" = yes; then ++ # If using run time linking (on AIX 4.2 or later) use lib.so ++ # instead of lib.a to let people know that these are not ++ # typical AIX shared libraries. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ else ++ # We preserve .a as extension for shared libraries through AIX4.2 ++ # and later when we are not doing run time linking. ++ library_names_spec='${libname}${release}.a $libname.a' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ fi ++ shlibpath_var=LIBPATH ++ fi ++ ;; ++ ++amigaos*) ++ case $host_cpu in ++ powerpc) ++ # Since July 2007 AmigaOS4 officially supports .so libraries. ++ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ ;; ++ m68k) ++ library_names_spec='$libname.ixlibrary $libname.a' ++ # Create ${libname}_ixlibrary.a entries in /sys/libs. ++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ++ ;; ++ esac ++ ;; ++ ++beos*) ++ library_names_spec='${libname}${shared_ext}' ++ dynamic_linker="$host_os ld.so" ++ shlibpath_var=LIBRARY_PATH ++ ;; ++ ++bsdi[45]*) ++ version_type=linux ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" ++ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" ++ # the default ld.so.conf also contains /usr/contrib/lib and ++ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow ++ # libtool to hard-code these into programs ++ ;; ++ ++cygwin* | mingw* | pw32*) ++ version_type=windows ++ shrext_cmds=".dll" ++ need_version=no ++ need_lib_prefix=no ++ ++ case $GCC,$host_os in ++ yes,cygwin* | yes,mingw* | yes,pw32*) ++ library_names_spec='$libname.dll.a' ++ # DLL is installed to $(libdir)/../bin by postinstall_cmds ++ postinstall_cmds='base_file=`basename \${file}`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ ++ dldir=$destdir/`dirname \$dlpath`~ ++ test -d \$dldir || mkdir -p \$dldir~ ++ $install_prog $dir/$dlname \$dldir/$dlname~ ++ chmod a+x \$dldir/$dlname~ ++ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then ++ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; ++ fi' ++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ ++ dlpath=$dir/\$dldll~ ++ $RM \$dlpath' ++ shlibpath_overrides_runpath=yes ++ ++ case $host_os in ++ cygwin*) ++ # Cygwin DLLs use 'cyg' prefix rather than 'lib' ++ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ++ ;; ++ mingw*) ++ # MinGW DLLs use traditional 'lib' prefix ++ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then ++ # It is most probably a Windows format PATH printed by ++ # mingw gcc, but we are running on Cygwin. Gcc prints its search ++ # path with ; separators, and with drive letters. We can handle the ++ # drive letters (cygwin fileutils understands them), so leave them, ++ # especially as we might pass files found there to a mingw objdump, ++ # which wouldn't understand a cygwinified path. Ahh. ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ ;; ++ pw32*) ++ # pw32 DLLs use 'pw' prefix rather than 'lib' ++ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ ;; ++ esac ++ ;; ++ ++ *) ++ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ++ ;; ++ esac ++ dynamic_linker='Win32 ld.exe' ++ # FIXME: first we should search . and the directory the executable is in ++ shlibpath_var=PATH ++ ;; ++ ++darwin* | rhapsody*) ++ dynamic_linker="$host_os dyld" ++ version_type=darwin ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' ++ soname_spec='${libname}${release}${major}$shared_ext' ++ shlibpath_overrides_runpath=yes ++ shlibpath_var=DYLD_LIBRARY_PATH ++ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' ++ ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" ++ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ++ ;; ++ ++dgux*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; ++ ++freebsd1*) ++ dynamic_linker=no ++ ;; ++ ++freebsd* | dragonfly*) ++ # DragonFly does not have aout. When/if they implement a new ++ # versioning mechanism, adjust this. ++ if test -x /usr/bin/objformat; then ++ objformat=`/usr/bin/objformat` ++ else ++ case $host_os in ++ freebsd[123]*) objformat=aout ;; ++ *) objformat=elf ;; ++ esac ++ fi ++ version_type=freebsd-$objformat ++ case $version_type in ++ freebsd-elf*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ need_version=no ++ need_lib_prefix=no ++ ;; ++ freebsd-*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' ++ need_version=yes ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_os in ++ freebsd2*) ++ shlibpath_overrides_runpath=yes ++ ;; ++ freebsd3.[01]* | freebsdelf3.[01]*) ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ ++ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ *) # from 4.6 on, and DragonFly ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ esac ++ ;; ++ ++gnu*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ ;; ++ ++hpux9* | hpux10* | hpux11*) ++ # Give a soname corresponding to the major version so that dld.sl refuses to ++ # link against other versions. ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ case $host_cpu in ++ ia64*) ++ shrext_cmds='.so' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.so" ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ if test "X$HPUX_IA64_MODE" = X32; then ++ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" ++ else ++ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" ++ fi ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ hppa*64*) ++ shrext_cmds='.sl' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ *) ++ shrext_cmds='.sl' ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=SHLIB_PATH ++ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; ++ esac ++ # HP-UX runs *really* slowly unless shared libraries are mode 555. ++ postinstall_cmds='chmod 555 $lib' ++ ;; ++ ++interix[3-9]*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ ++irix5* | irix6* | nonstopux*) ++ case $host_os in ++ nonstopux*) version_type=nonstopux ;; ++ *) ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ version_type=linux ++ else ++ version_type=irix ++ fi ;; ++ esac ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' ++ case $host_os in ++ irix5* | nonstopux*) ++ libsuff= shlibsuff= ++ ;; ++ *) ++ case $LD in # libtool.m4 will add one of these switches to LD ++ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") ++ libsuff= shlibsuff= libmagic=32-bit;; ++ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") ++ libsuff=32 shlibsuff=N32 libmagic=N32;; ++ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") ++ libsuff=64 shlibsuff=64 libmagic=64-bit;; ++ *) libsuff= shlibsuff= libmagic=never-match;; ++ esac ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" ++ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" ++ hardcode_into_libs=yes ++ ;; ++ ++# No shared lib support for Linux oldld, aout, or coff. ++linux*oldld* | linux*aout* | linux*coff*) ++ dynamic_linker=no ++ ;; ++ ++# This must be Linux ELF. ++linux* | k*bsd*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ # Some binutils ld are patched to set DT_RUNPATH ++ save_LDFLAGS=$LDFLAGS ++ save_libdir=$libdir ++ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ ++ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then ++ shlibpath_overrides_runpath=yes ++fi ++ ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ LDFLAGS=$save_LDFLAGS ++ libdir=$save_libdir ++ ++ # This implies no fast_install, which is unacceptable. ++ # Some rework will be needed to allow for fast_install ++ # before this can be enabled. ++ hardcode_into_libs=yes ++ ++ # Append ld.so.conf contents to the search path ++ if test -f /etc/ld.so.conf; then ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" ++ fi ++ ++ # We used to test for /lib/ld.so.1 and disable shared libraries on ++ # powerpc, because MkLinux only supported shared libraries with the ++ # GNU dynamic linker. Since this was broken with cross compilers, ++ # most powerpc-linux boxes support dynamic linking these days and ++ # people can always --disable-shared, the test was removed, and we ++ # assume the GNU/Linux dynamic linker is in use. ++ dynamic_linker='GNU/Linux ld.so' ++ ;; ++ ++netbsdelf*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='NetBSD ld.elf_so' ++ ;; ++ ++netbsd*) ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ dynamic_linker='NetBSD (a.out) ld.so' ++ else ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='NetBSD ld.elf_so' ++ fi ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ ++newsos6) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ ;; ++ ++*nto* | *qnx*) ++ version_type=qnx ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='ldqnx.so' ++ ;; ++ ++openbsd*) ++ version_type=sunos ++ sys_lib_dlsearch_path_spec="/usr/lib" ++ need_lib_prefix=no ++ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. ++ case $host_os in ++ openbsd3.3 | openbsd3.3.*) need_version=yes ;; ++ *) need_version=no ;; ++ esac ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ case $host_os in ++ openbsd2.[89] | openbsd2.[89].*) ++ shlibpath_overrides_runpath=no ++ ;; ++ *) ++ shlibpath_overrides_runpath=yes ++ ;; ++ esac ++ else ++ shlibpath_overrides_runpath=yes ++ fi ++ ;; ++ ++os2*) ++ libname_spec='$name' ++ shrext_cmds=".dll" ++ need_lib_prefix=no ++ library_names_spec='$libname${shared_ext} $libname.a' ++ dynamic_linker='OS/2 ld.exe' ++ shlibpath_var=LIBPATH ++ ;; ++ ++osf3* | osf4* | osf5*) ++ version_type=osf ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" ++ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ++ ;; ++ ++rdos*) ++ dynamic_linker=no ++ ;; ++ ++solaris*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ # ldd complains unless libraries are executable ++ postinstall_cmds='chmod +x $lib' ++ ;; ++ ++sunos4*) ++ version_type=sunos ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ if test "$with_gnu_ld" = yes; then ++ need_lib_prefix=no ++ fi ++ need_version=yes ++ ;; ++ ++sysv4 | sysv4.3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_vendor in ++ sni) ++ shlibpath_overrides_runpath=no ++ need_lib_prefix=no ++ runpath_var=LD_RUN_PATH ++ ;; ++ siemens) ++ need_lib_prefix=no ++ ;; ++ motorola) ++ need_lib_prefix=no ++ need_version=no ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ++ ;; ++ esac ++ ;; ++ ++sysv4*MP*) ++ if test -d /usr/nec ;then ++ version_type=linux ++ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' ++ soname_spec='$libname${shared_ext}.$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ fi ++ ;; ++ ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ version_type=freebsd-elf ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ if test "$with_gnu_ld" = yes; then ++ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' ++ else ++ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' ++ case $host_os in ++ sco3.2v5*) ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ++ ;; ++ esac ++ fi ++ sys_lib_dlsearch_path_spec='/usr/lib' ++ ;; ++ ++tpf*) ++ # TPF is a cross-target only. Preferred cross-host = GNU/Linux. ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_name_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ ++uts4*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; ++ ++*) ++ dynamic_linker=no ++ ;; ++esac ++{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 ++echo "${ECHO_T}$dynamic_linker" >&6; } ++test "$dynamic_linker" = no && can_build_shared=no ++ ++variables_saved_for_relink="PATH $shlibpath_var $runpath_var" ++if test "$GCC" = yes; then ++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" ++fi ++ ++if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then ++ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" ++fi ++if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then ++ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ { echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } ++hardcode_action= ++if test -n "$hardcode_libdir_flag_spec" || ++ test -n "$runpath_var" || ++ test "X$hardcode_automatic" = "Xyes" ; then ++ ++ # We can hardcode non-existent directories. ++ if test "$hardcode_direct" != no && ++ # If the only mechanism to avoid hardcoding is shlibpath_var, we ++ # have to relink, otherwise we might link with an installed library ++ # when we should be linking with a yet-to-be-installed one ++ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && ++ test "$hardcode_minus_L" != no; then ++ # Linking always hardcodes the temporary library directory. ++ hardcode_action=relink ++ else ++ # We can link without hardcoding, and we can hardcode nonexisting dirs. ++ hardcode_action=immediate ++ fi ++else ++ # We cannot hardcode anything, or else we can only hardcode existing ++ # directories. ++ hardcode_action=unsupported ++fi ++{ echo "$as_me:$LINENO: result: $hardcode_action" >&5 ++echo "${ECHO_T}$hardcode_action" >&6; } ++ ++if test "$hardcode_action" = relink || ++ test "$inherit_rpath" = yes; then ++ # Fast installation is not supported ++ enable_fast_install=no ++elif test "$shlibpath_overrides_runpath" = yes || ++ test "$enable_shared" = no; then ++ # Fast installation is not necessary ++ enable_fast_install=needless ++fi ++ ++ ++ ++ ++ ++ ++ if test "x$enable_dlopen" != xyes; then ++ enable_dlopen=unknown ++ enable_dlopen_self=unknown ++ enable_dlopen_self_static=unknown ++else ++ lt_cv_dlopen=no ++ lt_cv_dlopen_libs= ++ ++ case $host_os in ++ beos*) ++ lt_cv_dlopen="load_add_on" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes ++ ;; ++ ++ mingw* | pw32*) ++ lt_cv_dlopen="LoadLibrary" ++ lt_cv_dlopen_libs= ++ ;; ++ ++ cygwin*) ++ lt_cv_dlopen="dlopen" ++ lt_cv_dlopen_libs= ++ ;; ++ ++ darwin*) ++ # if libdl is installed we need to link against it ++ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 ++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dl_dlopen+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldl $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dlopen (); ++int ++main () ++{ ++return dlopen (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dl_dlopen=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_dl_dlopen=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } ++if test $ac_cv_lib_dl_dlopen = yes; then ++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" ++else ++ ++ lt_cv_dlopen="dyld" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes ++ ++fi ++ ++ ;; ++ ++ *) ++ { echo "$as_me:$LINENO: checking for shl_load" >&5 ++echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; } ++if test "${ac_cv_func_shl_load+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define shl_load to an innocuous variant, in case declares shl_load. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define shl_load innocuous_shl_load ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char shl_load (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef shl_load ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char shl_load (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_shl_load || defined __stub___shl_load ++choke me ++#endif ++ ++int ++main () ++{ ++return shl_load (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_shl_load=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_func_shl_load=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 ++echo "${ECHO_T}$ac_cv_func_shl_load" >&6; } ++if test $ac_cv_func_shl_load = yes; then ++ lt_cv_dlopen="shl_load" ++else ++ { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 ++echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dld_shl_load+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldld $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char shl_load (); ++int ++main () ++{ ++return shl_load (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dld_shl_load=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_dld_shl_load=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 ++echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; } ++if test $ac_cv_lib_dld_shl_load = yes; then ++ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" ++else ++ { echo "$as_me:$LINENO: checking for dlopen" >&5 ++echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; } ++if test "${ac_cv_func_dlopen+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define dlopen to an innocuous variant, in case declares dlopen. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define dlopen innocuous_dlopen ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char dlopen (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef dlopen ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dlopen (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_dlopen || defined __stub___dlopen ++choke me ++#endif ++ ++int ++main () ++{ ++return dlopen (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_dlopen=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_func_dlopen=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_func_dlopen" >&6; } ++if test $ac_cv_func_dlopen = yes; then ++ lt_cv_dlopen="dlopen" ++else ++ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 ++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dl_dlopen+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldl $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dlopen (); ++int ++main () ++{ ++return dlopen (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dl_dlopen=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_dl_dlopen=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } ++if test $ac_cv_lib_dl_dlopen = yes; then ++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" ++else ++ { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 ++echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; } ++if test "${ac_cv_lib_svld_dlopen+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lsvld $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dlopen (); ++int ++main () ++{ ++return dlopen (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_svld_dlopen=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_svld_dlopen=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; } ++if test $ac_cv_lib_svld_dlopen = yes; then ++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" ++else ++ { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 ++echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dld_dld_link+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldld $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dld_link (); ++int ++main () ++{ ++return dld_link (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dld_dld_link=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_dld_dld_link=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 ++echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; } ++if test $ac_cv_lib_dld_dld_link = yes; then ++ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" ++fi ++ ++ ++fi ++ ++ ++fi ++ ++ ++fi ++ ++ ++fi ++ ++ ++fi ++ ++ ;; ++ esac ++ ++ if test "x$lt_cv_dlopen" != xno; then ++ enable_dlopen=yes ++ else ++ enable_dlopen=no ++ fi ++ ++ case $lt_cv_dlopen in ++ dlopen) ++ save_CPPFLAGS="$CPPFLAGS" ++ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" ++ ++ save_LDFLAGS="$LDFLAGS" ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" ++ ++ save_LIBS="$LIBS" ++ LIBS="$lt_cv_dlopen_libs $LIBS" ++ ++ { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 ++echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; } ++if test "${lt_cv_dlopen_self+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test "$cross_compiling" = yes; then : ++ lt_cv_dlopen_self=cross ++else ++ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 ++ lt_status=$lt_dlunknown ++ cat > conftest.$ac_ext <<_LT_EOF ++#line __oline__ "configure" ++#include "confdefs.h" ++ ++#if HAVE_DLFCN_H ++#include ++#endif ++ ++#include ++ ++#ifdef RTLD_GLOBAL ++# define LT_DLGLOBAL RTLD_GLOBAL ++#else ++# ifdef DL_GLOBAL ++# define LT_DLGLOBAL DL_GLOBAL ++# else ++# define LT_DLGLOBAL 0 ++# endif ++#endif ++ ++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we ++ find out it does not work in some platform. */ ++#ifndef LT_DLLAZY_OR_NOW ++# ifdef RTLD_LAZY ++# define LT_DLLAZY_OR_NOW RTLD_LAZY ++# else ++# ifdef DL_LAZY ++# define LT_DLLAZY_OR_NOW DL_LAZY ++# else ++# ifdef RTLD_NOW ++# define LT_DLLAZY_OR_NOW RTLD_NOW ++# else ++# ifdef DL_NOW ++# define LT_DLLAZY_OR_NOW DL_NOW ++# else ++# define LT_DLLAZY_OR_NOW 0 ++# endif ++# endif ++# endif ++# endif ++#endif ++ ++#ifdef __cplusplus ++extern "C" void exit (int); ++#endif ++ ++void fnord() { int i=42;} ++int main () ++{ ++ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); ++ int status = $lt_dlunknown; ++ ++ if (self) ++ { ++ if (dlsym (self,"fnord")) status = $lt_dlno_uscore; ++ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; ++ /* dlclose (self); */ ++ } ++ else ++ puts (dlerror ()); ++ ++ exit (status); ++} ++_LT_EOF ++ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then ++ (./conftest; exit; ) >&5 2>/dev/null ++ lt_status=$? ++ case x$lt_status in ++ x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; ++ x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; ++ x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; ++ esac ++ else : ++ # compilation failed ++ lt_cv_dlopen_self=no ++ fi ++fi ++rm -fr conftest* ++ ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 ++echo "${ECHO_T}$lt_cv_dlopen_self" >&6; } ++ ++ if test "x$lt_cv_dlopen_self" = xyes; then ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" ++ { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 ++echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; } ++if test "${lt_cv_dlopen_self_static+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test "$cross_compiling" = yes; then : ++ lt_cv_dlopen_self_static=cross ++else ++ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 ++ lt_status=$lt_dlunknown ++ cat > conftest.$ac_ext <<_LT_EOF ++#line __oline__ "configure" ++#include "confdefs.h" ++ ++#if HAVE_DLFCN_H ++#include ++#endif ++ ++#include ++ ++#ifdef RTLD_GLOBAL ++# define LT_DLGLOBAL RTLD_GLOBAL ++#else ++# ifdef DL_GLOBAL ++# define LT_DLGLOBAL DL_GLOBAL ++# else ++# define LT_DLGLOBAL 0 ++# endif ++#endif ++ ++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we ++ find out it does not work in some platform. */ ++#ifndef LT_DLLAZY_OR_NOW ++# ifdef RTLD_LAZY ++# define LT_DLLAZY_OR_NOW RTLD_LAZY ++# else ++# ifdef DL_LAZY ++# define LT_DLLAZY_OR_NOW DL_LAZY ++# else ++# ifdef RTLD_NOW ++# define LT_DLLAZY_OR_NOW RTLD_NOW ++# else ++# ifdef DL_NOW ++# define LT_DLLAZY_OR_NOW DL_NOW ++# else ++# define LT_DLLAZY_OR_NOW 0 ++# endif ++# endif ++# endif ++# endif ++#endif ++ ++#ifdef __cplusplus ++extern "C" void exit (int); ++#endif ++ ++void fnord() { int i=42;} ++int main () ++{ ++ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); ++ int status = $lt_dlunknown; ++ ++ if (self) ++ { ++ if (dlsym (self,"fnord")) status = $lt_dlno_uscore; ++ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; ++ /* dlclose (self); */ ++ } ++ else ++ puts (dlerror ()); ++ ++ exit (status); ++} ++_LT_EOF ++ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then ++ (./conftest; exit; ) >&5 2>/dev/null ++ lt_status=$? ++ case x$lt_status in ++ x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; ++ x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; ++ x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; ++ esac ++ else : ++ # compilation failed ++ lt_cv_dlopen_self_static=no ++ fi ++fi ++rm -fr conftest* ++ ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 ++echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; } ++ fi ++ ++ CPPFLAGS="$save_CPPFLAGS" ++ LDFLAGS="$save_LDFLAGS" ++ LIBS="$save_LIBS" ++ ;; ++ esac ++ ++ case $lt_cv_dlopen_self in ++ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; ++ *) enable_dlopen_self=unknown ;; ++ esac ++ ++ case $lt_cv_dlopen_self_static in ++ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; ++ *) enable_dlopen_self_static=unknown ;; ++ esac ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++striplib= ++old_striplib= ++{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 ++echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; } ++if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then ++ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" ++ test -z "$striplib" && striplib="$STRIP --strip-unneeded" ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++# FIXME - insert some real tests, host_os isn't really good enough ++ case $host_os in ++ darwin*) ++ if test -n "$STRIP" ; then ++ striplib="$STRIP -x" ++ old_striplib="$STRIP -S" ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ fi ++ ;; ++ *) ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ ;; ++ esac ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ # Report which library types will actually be built ++ { echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 ++echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; } ++ { echo "$as_me:$LINENO: result: $can_build_shared" >&5 ++echo "${ECHO_T}$can_build_shared" >&6; } ++ ++ { echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 ++echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; } ++ test "$can_build_shared" = "no" && enable_shared=no ++ ++ # On AIX, shared libraries and static libraries use the same namespace, and ++ # are all built from PIC. ++ case $host_os in ++ aix3*) ++ test "$enable_shared" = yes && enable_static=no ++ if test -n "$RANLIB"; then ++ archive_cmds="$archive_cmds~\$RANLIB \$lib" ++ postinstall_cmds='$RANLIB $lib' ++ fi ++ ;; ++ ++ aix[4-9]*) ++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then ++ test "$enable_shared" = yes && enable_static=no ++ fi ++ ;; ++ esac ++ { echo "$as_me:$LINENO: result: $enable_shared" >&5 ++echo "${ECHO_T}$enable_shared" >&6; } ++ ++ { echo "$as_me:$LINENO: checking whether to build static libraries" >&5 ++echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; } ++ # Make sure either enable_shared or enable_static is yes. ++ test "$enable_shared" = yes || enable_static=yes ++ { echo "$as_me:$LINENO: result: $enable_static" >&5 ++echo "${ECHO_T}$enable_static" >&6; } ++ ++ ++ ++ ++fi ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++CC="$lt_save_CC" ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ac_config_commands="$ac_config_commands libtool" ++ ++ ++ ++ ++# Only expand once: ++ ++ ++ ++case "$am__api_version" in ++ 1.01234) ++ { { echo "$as_me:$LINENO: error: Automake 1.5 or newer is required to use intltool" >&5 ++echo "$as_me: error: Automake 1.5 or newer is required to use intltool" >&2;} ++ { (exit 1); exit 1; }; } ++ ;; ++ *) ++ ;; ++esac ++ ++if test -n "0.35.0"; then ++ { echo "$as_me:$LINENO: checking for intltool >= 0.35.0" >&5 ++echo $ECHO_N "checking for intltool >= 0.35.0... $ECHO_C" >&6; } ++ ++ INTLTOOL_REQUIRED_VERSION_AS_INT=`echo 0.35.0 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` ++ INTLTOOL_APPLIED_VERSION=`awk -F\" '/\\$VERSION / { print $ 2; }' ${ac_aux_dir}/intltool-update.in` ++ INTLTOOL_APPLIED_VERSION_AS_INT=`awk -F\" '/\\$VERSION / { split($ 2, VERSION, "."); print VERSION[1] * 1000 + VERSION[2] * 100 + VERSION[3];}' ${ac_aux_dir}/intltool-update.in` ++ ++ { echo "$as_me:$LINENO: result: $INTLTOOL_APPLIED_VERSION found" >&5 ++echo "${ECHO_T}$INTLTOOL_APPLIED_VERSION found" >&6; } ++ test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || ++ { { echo "$as_me:$LINENO: error: Your intltool is too old. You need intltool 0.35.0 or later." >&5 ++echo "$as_me: error: Your intltool is too old. You need intltool 0.35.0 or later." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++ INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -p $(top_srcdir)/po $< $@' ++ INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u /tmp $< $@' ++ INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++# Check the gettext tools to make sure they are GNU ++# Extract the first word of "xgettext", so it can be a program name with args. ++set dummy xgettext; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_XGETTEXT+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $XGETTEXT in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_XGETTEXT="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++XGETTEXT=$ac_cv_path_XGETTEXT ++if test -n "$XGETTEXT"; then ++ { echo "$as_me:$LINENO: result: $XGETTEXT" >&5 ++echo "${ECHO_T}$XGETTEXT" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++# Extract the first word of "msgmerge", so it can be a program name with args. ++set dummy msgmerge; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_MSGMERGE+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $MSGMERGE in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_MSGMERGE="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++MSGMERGE=$ac_cv_path_MSGMERGE ++if test -n "$MSGMERGE"; then ++ { echo "$as_me:$LINENO: result: $MSGMERGE" >&5 ++echo "${ECHO_T}$MSGMERGE" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++# Extract the first word of "msgfmt", so it can be a program name with args. ++set dummy msgfmt; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_MSGFMT+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $MSGFMT in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_MSGFMT="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++MSGFMT=$ac_cv_path_MSGFMT ++if test -n "$MSGFMT"; then ++ { echo "$as_me:$LINENO: result: $MSGFMT" >&5 ++echo "${ECHO_T}$MSGFMT" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then ++ { { echo "$as_me:$LINENO: error: GNU gettext tools not found; required for intltool" >&5 ++echo "$as_me: error: GNU gettext tools not found; required for intltool" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" ++mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" ++mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" ++if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then ++ { { echo "$as_me:$LINENO: error: GNU gettext tools not found; required for intltool" >&5 ++echo "$as_me: error: GNU gettext tools not found; required for intltool" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++# Use the tools built into the package, not the ones that are installed. ++INTLTOOL_EXTRACT='$(top_builddir)/intltool-extract' ++ ++INTLTOOL_MERGE='$(top_builddir)/intltool-merge' ++ ++INTLTOOL_UPDATE='$(top_builddir)/intltool-update' ++ ++ ++# Extract the first word of "perl", so it can be a program name with args. ++set dummy perl; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_INTLTOOL_PERL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $INTLTOOL_PERL in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_INTLTOOL_PERL="$INTLTOOL_PERL" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_INTLTOOL_PERL="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++INTLTOOL_PERL=$ac_cv_path_INTLTOOL_PERL ++if test -n "$INTLTOOL_PERL"; then ++ { echo "$as_me:$LINENO: result: $INTLTOOL_PERL" >&5 ++echo "${ECHO_T}$INTLTOOL_PERL" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++if test -z "$INTLTOOL_PERL"; then ++ { { echo "$as_me:$LINENO: error: perl not found; required for intltool" >&5 ++echo "$as_me: error: perl not found; required for intltool" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "`$INTLTOOL_PERL -v | fgrep '5.' 2> /dev/null`"; then ++ { { echo "$as_me:$LINENO: error: perl 5.x required for intltool" >&5 ++echo "$as_me: error: perl 5.x required for intltool" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test "x" != "xno-xml"; then ++ { echo "$as_me:$LINENO: checking for XML::Parser" >&5 ++echo $ECHO_N "checking for XML::Parser... $ECHO_C" >&6; } ++ if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then ++ { echo "$as_me:$LINENO: result: ok" >&5 ++echo "${ECHO_T}ok" >&6; } ++ else ++ { { echo "$as_me:$LINENO: error: XML::Parser perl module is required for intltool" >&5 ++echo "$as_me: error: XML::Parser perl module is required for intltool" >&2;} ++ { (exit 1); exit 1; }; } ++ fi ++fi ++ ++# Substitute ALL_LINGUAS so we can use it in po/Makefile ++ ++ ++# Set DATADIRNAME correctly if it is not set yet ++# (copied from glib-gettext.m4) ++if test -z "$DATADIRNAME"; then ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++extern int _nl_msg_cat_cntr; ++ return _nl_msg_cat_cntr ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ DATADIRNAME=share ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ case $host in ++ *-*-solaris*) ++ { echo "$as_me:$LINENO: checking for bind_textdomain_codeset" >&5 ++echo $ECHO_N "checking for bind_textdomain_codeset... $ECHO_C" >&6; } ++if test "${ac_cv_func_bind_textdomain_codeset+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define bind_textdomain_codeset to an innocuous variant, in case declares bind_textdomain_codeset. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define bind_textdomain_codeset innocuous_bind_textdomain_codeset ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char bind_textdomain_codeset (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef bind_textdomain_codeset ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char bind_textdomain_codeset (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_bind_textdomain_codeset || defined __stub___bind_textdomain_codeset ++choke me ++#endif ++ ++int ++main () ++{ ++return bind_textdomain_codeset (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_bind_textdomain_codeset=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_func_bind_textdomain_codeset=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_bind_textdomain_codeset" >&5 ++echo "${ECHO_T}$ac_cv_func_bind_textdomain_codeset" >&6; } ++if test $ac_cv_func_bind_textdomain_codeset = yes; then ++ DATADIRNAME=share ++else ++ DATADIRNAME=lib ++fi ++ ++ ;; ++ *) ++ DATADIRNAME=lib ++ ;; ++ esac ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++ ++ ++ ++ ++ ++ac_config_commands="$ac_config_commands intltool" ++ ++ ++ ++ ++ ++ ++ # Check whether --enable-compile-warnings was given. ++if test "${enable_compile_warnings+set}" = set; then ++ enableval=$enable_compile_warnings; ++else ++ enable_compile_warnings="yes" ++fi ++ ++ ++ warnCFLAGS= ++ if test "x$GCC" != xyes; then ++ enable_compile_warnings=no ++ fi ++ ++ warning_flags= ++ realsave_CFLAGS="$CFLAGS" ++ ++ case "$enable_compile_warnings" in ++ no) ++ warning_flags= ++ ;; ++ minimum) ++ warning_flags="-Wall" ++ ;; ++ yes) ++ warning_flags="-Wall -Wmissing-prototypes" ++ ;; ++ maximum|error) ++ warning_flags="-Wall -Wmissing-prototypes -Wnested-externs -Wpointer-arith" ++ CFLAGS="$warning_flags $CFLAGS" ++ for option in -Wno-sign-compare; do ++ SAVE_CFLAGS="$CFLAGS" ++ CFLAGS="$CFLAGS $option" ++ { echo "$as_me:$LINENO: checking whether gcc understands $option" >&5 ++echo $ECHO_N "checking whether gcc understands $option... $ECHO_C" >&6; } ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ has_option=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ has_option=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ CFLAGS="$SAVE_CFLAGS" ++ { echo "$as_me:$LINENO: result: $has_option" >&5 ++echo "${ECHO_T}$has_option" >&6; } ++ if test $has_option = yes; then ++ warning_flags="$warning_flags $option" ++ fi ++ unset has_option ++ unset SAVE_CFLAGS ++ done ++ unset option ++ if test "$enable_compile_warnings" = "error" ; then ++ warning_flags="$warning_flags -Werror" ++ fi ++ ;; ++ *) ++ { { echo "$as_me:$LINENO: error: Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" >&5 ++echo "$as_me: error: Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" >&2;} ++ { (exit 1); exit 1; }; } ++ ;; ++ esac ++ CFLAGS="$realsave_CFLAGS" ++ { echo "$as_me:$LINENO: checking what warning flags to pass to the C compiler" >&5 ++echo $ECHO_N "checking what warning flags to pass to the C compiler... $ECHO_C" >&6; } ++ { echo "$as_me:$LINENO: result: $warning_flags" >&5 ++echo "${ECHO_T}$warning_flags" >&6; } ++ ++ # Check whether --enable-iso-c was given. ++if test "${enable_iso_c+set}" = set; then ++ enableval=$enable_iso_c; ++else ++ enable_iso_c=no ++fi ++ ++ ++ { echo "$as_me:$LINENO: checking what language compliance flags to pass to the C compiler" >&5 ++echo $ECHO_N "checking what language compliance flags to pass to the C compiler... $ECHO_C" >&6; } ++ complCFLAGS= ++ if test "x$enable_iso_c" != "xno"; then ++ if test "x$GCC" = "xyes"; then ++ case " $CFLAGS " in ++ *\ \ -ansi\ \ *) ;; ++ *) complCFLAGS="$complCFLAGS -ansi" ;; ++ esac ++ case " $CFLAGS " in ++ *\ \ -pedantic\ \ *) ;; ++ *) complCFLAGS="$complCFLAGS -pedantic" ;; ++ esac ++ fi ++ fi ++ { echo "$as_me:$LINENO: result: $complCFLAGS" >&5 ++echo "${ECHO_T}$complCFLAGS" >&6; } ++ ++ WARN_CFLAGS="$warning_flags $complCFLAGS" ++ ++ ++ ++ ++if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. ++set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_PKG_CONFIG+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $PKG_CONFIG in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++PKG_CONFIG=$ac_cv_path_PKG_CONFIG ++if test -n "$PKG_CONFIG"; then ++ { echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5 ++echo "${ECHO_T}$PKG_CONFIG" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_path_PKG_CONFIG"; then ++ ac_pt_PKG_CONFIG=$PKG_CONFIG ++ # Extract the first word of "pkg-config", so it can be a program name with args. ++set dummy pkg-config; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $ac_pt_PKG_CONFIG in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG ++if test -n "$ac_pt_PKG_CONFIG"; then ++ { echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5 ++echo "${ECHO_T}$ac_pt_PKG_CONFIG" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_pt_PKG_CONFIG" = x; then ++ PKG_CONFIG="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ PKG_CONFIG=$ac_pt_PKG_CONFIG ++ fi ++else ++ PKG_CONFIG="$ac_cv_path_PKG_CONFIG" ++fi ++ ++fi ++if test -n "$PKG_CONFIG"; then ++ _pkg_min_version=0.9.0 ++ { echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5 ++echo $ECHO_N "checking pkg-config is at least version $_pkg_min_version... $ECHO_C" >&6; } ++ if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ PKG_CONFIG="" ++ fi ++ ++fi ++ ++gdu_cv_version_required=0.3.2 ++ ++if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gnome-doc-utils >= \$gdu_cv_version_required\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "gnome-doc-utils >= $gdu_cv_version_required") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ gdu_cv_have_gdu=yes ++else ++ gdu_cv_have_gdu=no ++fi ++ ++if test "$gdu_cv_have_gdu" = "yes"; then ++ : ++else ++ { { echo "$as_me:$LINENO: error: gnome-doc-utils >= $gdu_cv_version_required not found" >&5 ++echo "$as_me: error: gnome-doc-utils >= $gdu_cv_version_required not found" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++ ++ ++# Check whether --with-help-dir was given. ++if test "${with_help_dir+set}" = set; then ++ withval=$with_help_dir; ++else ++ with_help_dir='${datadir}/gnome/help' ++fi ++ ++HELP_DIR="$with_help_dir" ++ ++ ++ ++# Check whether --with-omf-dir was given. ++if test "${with_omf_dir+set}" = set; then ++ withval=$with_omf_dir; ++else ++ with_omf_dir='${datadir}/omf' ++fi ++ ++OMF_DIR="$with_omf_dir" ++ ++ ++ ++# Check whether --with-help-formats was given. ++if test "${with_help_formats+set}" = set; then ++ withval=$with_help_formats; ++else ++ with_help_formats='' ++fi ++ ++DOC_USER_FORMATS="$with_help_formats" ++ ++ ++# Check whether --enable-scrollkeeper was given. ++if test "${enable_scrollkeeper+set}" = set; then ++ enableval=$enable_scrollkeeper; ++else ++ enable_scrollkeeper=yes ++fi ++ ++ ++ ++if test "$gdu_cv_have_gdu" = "yes" -a "$enable_scrollkeeper" = "yes"; then ++ ENABLE_SK_TRUE= ++ ENABLE_SK_FALSE='#' ++else ++ ENABLE_SK_TRUE='#' ++ ENABLE_SK_FALSE= ++fi ++ ++ ++DISTCHECK_CONFIGURE_FLAGS="--disable-scrollkeeper $DISTCHECK_CONFIGURE_FLAGS" ++ ++ ++ ++ ++if test "$gdu_cv_have_gdu" = "yes"; then ++ HAVE_GNOME_DOC_UTILS_TRUE= ++ HAVE_GNOME_DOC_UTILS_FALSE='#' ++else ++ HAVE_GNOME_DOC_UTILS_TRUE='#' ++ HAVE_GNOME_DOC_UTILS_FALSE= ++fi ++ ++ ++ ++ ++# Extract the first word of "glib-genmarshal", so it can be a program name with args. ++set dummy glib-genmarshal; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_GLIB_GENMARSHAL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $GLIB_GENMARSHAL in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_GLIB_GENMARSHAL="$GLIB_GENMARSHAL" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_GLIB_GENMARSHAL="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++GLIB_GENMARSHAL=$ac_cv_path_GLIB_GENMARSHAL ++if test -n "$GLIB_GENMARSHAL"; then ++ { echo "$as_me:$LINENO: result: $GLIB_GENMARSHAL" >&5 ++echo "${ECHO_T}$GLIB_GENMARSHAL" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ ++if test "$GCC" = "yes"; then ++ CPPFLAGS="$CPPFLAGS -Wcast-align -Wno-uninitialized" ++ CPPFLAGS="$CPPFLAGS -Wall -Wformat-security" ++fi ++ ++CPPFLAGS="$CPPFLAGS -g" ++CPPFLAGS="$CPPFLAGS -fexceptions" ++ ++#CPPFLAGS="$CPPFLAGS -c -pg" ++#LDFLAGS="$LDFLAGS -pg" ++ ++GETTEXT_PACKAGE=gnome-power-manager ++ ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define GETTEXT_PACKAGE "gnome-power-manager" ++_ACEOF ++ ++ ++ ++ ++for ac_header in locale.h ++do ++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ { echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++fi ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++else ++ # Is the header compilable? ++{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 ++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++$ac_includes_default ++@%:@include <$ac_header> ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_header_compiler=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_header_compiler=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } ++ ++# Is the header present? ++{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 ++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++@%:@include <$ac_header> ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ ac_header_preproc=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_header_preproc=no ++fi ++ ++rm -f conftest.err conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } ++ ++# So? What about this header? ++case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in ++ yes:no: ) ++ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 ++echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 ++echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ++ ac_header_preproc=yes ++ ;; ++ no:yes:* ) ++ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 ++echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 ++echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 ++echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 ++echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 ++echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 ++echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ++ ++ ;; ++esac ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ eval "$as_ac_Header=\$ac_header_preproc" ++fi ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++ ++fi ++if test `eval echo '${'$as_ac_Header'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++@%:@define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++_ACEOF ++ ++fi ++ ++done ++ ++ if test $ac_cv_header_locale_h = yes; then ++ { echo "$as_me:$LINENO: checking for LC_MESSAGES" >&5 ++echo $ECHO_N "checking for LC_MESSAGES... $ECHO_C" >&6; } ++if test "${am_cv_val_LC_MESSAGES+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++int ++main () ++{ ++return LC_MESSAGES ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ am_cv_val_LC_MESSAGES=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ am_cv_val_LC_MESSAGES=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $am_cv_val_LC_MESSAGES" >&5 ++echo "${ECHO_T}$am_cv_val_LC_MESSAGES" >&6; } ++ if test $am_cv_val_LC_MESSAGES = yes; then ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_LC_MESSAGES 1 ++_ACEOF ++ ++ fi ++ fi ++ USE_NLS=yes ++ ++ ++ gt_cv_have_gettext=no ++ ++ CATOBJEXT=NONE ++ XGETTEXT=: ++ INTLLIBS= ++ ++ if test "${ac_cv_header_libintl_h+set}" = set; then ++ { echo "$as_me:$LINENO: checking for libintl.h" >&5 ++echo $ECHO_N "checking for libintl.h... $ECHO_C" >&6; } ++if test "${ac_cv_header_libintl_h+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_header_libintl_h" >&5 ++echo "${ECHO_T}$ac_cv_header_libintl_h" >&6; } ++else ++ # Is the header compilable? ++{ echo "$as_me:$LINENO: checking libintl.h usability" >&5 ++echo $ECHO_N "checking libintl.h usability... $ECHO_C" >&6; } ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++$ac_includes_default ++@%:@include ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_header_compiler=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_header_compiler=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } ++ ++# Is the header present? ++{ echo "$as_me:$LINENO: checking libintl.h presence" >&5 ++echo $ECHO_N "checking libintl.h presence... $ECHO_C" >&6; } ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++@%:@include ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ ac_header_preproc=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_header_preproc=no ++fi ++ ++rm -f conftest.err conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } ++ ++# So? What about this header? ++case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in ++ yes:no: ) ++ { echo "$as_me:$LINENO: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&5 ++echo "$as_me: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the compiler's result" >&5 ++echo "$as_me: WARNING: libintl.h: proceeding with the compiler's result" >&2;} ++ ac_header_preproc=yes ++ ;; ++ no:yes:* ) ++ { echo "$as_me:$LINENO: WARNING: libintl.h: present but cannot be compiled" >&5 ++echo "$as_me: WARNING: libintl.h: present but cannot be compiled" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: check for missing prerequisite headers?" >&5 ++echo "$as_me: WARNING: libintl.h: check for missing prerequisite headers?" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: see the Autoconf documentation" >&5 ++echo "$as_me: WARNING: libintl.h: see the Autoconf documentation" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: section \"Present But Cannot Be Compiled\"" >&5 ++echo "$as_me: WARNING: libintl.h: section \"Present But Cannot Be Compiled\"" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the preprocessor's result" >&5 ++echo "$as_me: WARNING: libintl.h: proceeding with the preprocessor's result" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: in the future, the compiler will take precedence" >&5 ++echo "$as_me: WARNING: libintl.h: in the future, the compiler will take precedence" >&2;} ++ ++ ;; ++esac ++{ echo "$as_me:$LINENO: checking for libintl.h" >&5 ++echo $ECHO_N "checking for libintl.h... $ECHO_C" >&6; } ++if test "${ac_cv_header_libintl_h+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_cv_header_libintl_h=$ac_header_preproc ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_header_libintl_h" >&5 ++echo "${ECHO_T}$ac_cv_header_libintl_h" >&6; } ++ ++fi ++if test $ac_cv_header_libintl_h = yes; then ++ gt_cv_func_dgettext_libintl="no" ++ libintl_extra_libs="" ++ ++ # ++ # First check in libc ++ # ++ { echo "$as_me:$LINENO: checking for ngettext in libc" >&5 ++echo $ECHO_N "checking for ngettext in libc... $ECHO_C" >&6; } ++if test "${gt_cv_func_ngettext_libc+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++#include ++ ++int ++main () ++{ ++return !ngettext ("","", 1) ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ gt_cv_func_ngettext_libc=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ gt_cv_func_ngettext_libc=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ ++fi ++{ echo "$as_me:$LINENO: result: $gt_cv_func_ngettext_libc" >&5 ++echo "${ECHO_T}$gt_cv_func_ngettext_libc" >&6; } ++ ++ if test "$gt_cv_func_ngettext_libc" = "yes" ; then ++ { echo "$as_me:$LINENO: checking for dgettext in libc" >&5 ++echo $ECHO_N "checking for dgettext in libc... $ECHO_C" >&6; } ++if test "${gt_cv_func_dgettext_libc+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++#include ++ ++int ++main () ++{ ++return !dgettext ("","") ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ gt_cv_func_dgettext_libc=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ gt_cv_func_dgettext_libc=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ ++fi ++{ echo "$as_me:$LINENO: result: $gt_cv_func_dgettext_libc" >&5 ++echo "${ECHO_T}$gt_cv_func_dgettext_libc" >&6; } ++ fi ++ ++ if test "$gt_cv_func_ngettext_libc" = "yes" ; then ++ ++for ac_func in bind_textdomain_codeset ++do ++as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define $ac_func to an innocuous variant, in case declares $ac_func. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define $ac_func innocuous_$ac_func ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char $ac_func (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef $ac_func ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char $ac_func (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_$ac_func || defined __stub___$ac_func ++choke me ++#endif ++ ++int ++main () ++{ ++return $ac_func (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ eval "$as_ac_var=yes" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ eval "$as_ac_var=no" ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++if test `eval echo '${'$as_ac_var'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 ++_ACEOF ++ ++fi ++done ++ ++ fi ++ ++ # ++ # If we don't have everything we want, check in libintl ++ # ++ if test "$gt_cv_func_dgettext_libc" != "yes" \ ++ || test "$gt_cv_func_ngettext_libc" != "yes" \ ++ || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then ++ ++ { echo "$as_me:$LINENO: checking for bindtextdomain in -lintl" >&5 ++echo $ECHO_N "checking for bindtextdomain in -lintl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_intl_bindtextdomain+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lintl $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char bindtextdomain (); ++int ++main () ++{ ++return bindtextdomain (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_intl_bindtextdomain=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_intl_bindtextdomain=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_bindtextdomain" >&5 ++echo "${ECHO_T}$ac_cv_lib_intl_bindtextdomain" >&6; } ++if test $ac_cv_lib_intl_bindtextdomain = yes; then ++ { echo "$as_me:$LINENO: checking for ngettext in -lintl" >&5 ++echo $ECHO_N "checking for ngettext in -lintl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_intl_ngettext+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lintl $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char ngettext (); ++int ++main () ++{ ++return ngettext (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_intl_ngettext=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_intl_ngettext=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_ngettext" >&5 ++echo "${ECHO_T}$ac_cv_lib_intl_ngettext" >&6; } ++if test $ac_cv_lib_intl_ngettext = yes; then ++ { echo "$as_me:$LINENO: checking for dgettext in -lintl" >&5 ++echo $ECHO_N "checking for dgettext in -lintl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_intl_dgettext+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lintl $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dgettext (); ++int ++main () ++{ ++return dgettext (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_intl_dgettext=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_intl_dgettext=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_dgettext" >&5 ++echo "${ECHO_T}$ac_cv_lib_intl_dgettext" >&6; } ++if test $ac_cv_lib_intl_dgettext = yes; then ++ gt_cv_func_dgettext_libintl=yes ++fi ++ ++fi ++ ++fi ++ ++ ++ if test "$gt_cv_func_dgettext_libintl" != "yes" ; then ++ { echo "$as_me:$LINENO: checking if -liconv is needed to use gettext" >&5 ++echo $ECHO_N "checking if -liconv is needed to use gettext... $ECHO_C" >&6; } ++ { echo "$as_me:$LINENO: result: " >&5 ++echo "${ECHO_T}" >&6; } ++ { echo "$as_me:$LINENO: checking for ngettext in -lintl" >&5 ++echo $ECHO_N "checking for ngettext in -lintl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_intl_ngettext+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lintl -liconv $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char ngettext (); ++int ++main () ++{ ++return ngettext (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_intl_ngettext=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_intl_ngettext=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_ngettext" >&5 ++echo "${ECHO_T}$ac_cv_lib_intl_ngettext" >&6; } ++if test $ac_cv_lib_intl_ngettext = yes; then ++ { echo "$as_me:$LINENO: checking for dcgettext in -lintl" >&5 ++echo $ECHO_N "checking for dcgettext in -lintl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_intl_dcgettext+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lintl -liconv $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dcgettext (); ++int ++main () ++{ ++return dcgettext (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_intl_dcgettext=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_intl_dcgettext=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_dcgettext" >&5 ++echo "${ECHO_T}$ac_cv_lib_intl_dcgettext" >&6; } ++if test $ac_cv_lib_intl_dcgettext = yes; then ++ gt_cv_func_dgettext_libintl=yes ++ libintl_extra_libs=-liconv ++else ++ : ++fi ++ ++else ++ : ++fi ++ ++ fi ++ ++ # ++ # If we found libintl, then check in it for bind_textdomain_codeset(); ++ # we'll prefer libc if neither have bind_textdomain_codeset(), ++ # and both have dgettext and ngettext ++ # ++ if test "$gt_cv_func_dgettext_libintl" = "yes" ; then ++ glib_save_LIBS="$LIBS" ++ LIBS="$LIBS -lintl $libintl_extra_libs" ++ unset ac_cv_func_bind_textdomain_codeset ++ ++for ac_func in bind_textdomain_codeset ++do ++as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define $ac_func to an innocuous variant, in case declares $ac_func. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define $ac_func innocuous_$ac_func ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char $ac_func (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef $ac_func ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char $ac_func (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_$ac_func || defined __stub___$ac_func ++choke me ++#endif ++ ++int ++main () ++{ ++return $ac_func (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ eval "$as_ac_var=yes" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ eval "$as_ac_var=no" ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++if test `eval echo '${'$as_ac_var'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 ++_ACEOF ++ ++fi ++done ++ ++ LIBS="$glib_save_LIBS" ++ ++ if test "$ac_cv_func_bind_textdomain_codeset" = "yes" ; then ++ gt_cv_func_dgettext_libc=no ++ else ++ if test "$gt_cv_func_dgettext_libc" = "yes" \ ++ && test "$gt_cv_func_ngettext_libc" = "yes"; then ++ gt_cv_func_dgettext_libintl=no ++ fi ++ fi ++ fi ++ fi ++ ++ if test "$gt_cv_func_dgettext_libc" = "yes" \ ++ || test "$gt_cv_func_dgettext_libintl" = "yes"; then ++ gt_cv_have_gettext=yes ++ fi ++ ++ if test "$gt_cv_func_dgettext_libintl" = "yes"; then ++ INTLLIBS="-lintl $libintl_extra_libs" ++ fi ++ ++ if test "$gt_cv_have_gettext" = "yes"; then ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_GETTEXT 1 ++_ACEOF ++ ++ # Extract the first word of "msgfmt", so it can be a program name with args. ++set dummy msgfmt; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_MSGFMT+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case "$MSGFMT" in ++ /*) ++ ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. ++ ;; ++ *) ++ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" ++ for ac_dir in $PATH; do ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$ac_word; then ++ if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then ++ ac_cv_path_MSGFMT="$ac_dir/$ac_word" ++ break ++ fi ++ fi ++ done ++ IFS="$ac_save_ifs" ++ test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no" ++ ;; ++esac ++fi ++MSGFMT="$ac_cv_path_MSGFMT" ++if test "$MSGFMT" != "no"; then ++ { echo "$as_me:$LINENO: result: $MSGFMT" >&5 ++echo "${ECHO_T}$MSGFMT" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ if test "$MSGFMT" != "no"; then ++ glib_save_LIBS="$LIBS" ++ LIBS="$LIBS $INTLLIBS" ++ ++for ac_func in dcgettext ++do ++as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define $ac_func to an innocuous variant, in case declares $ac_func. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define $ac_func innocuous_$ac_func ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char $ac_func (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef $ac_func ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char $ac_func (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_$ac_func || defined __stub___$ac_func ++choke me ++#endif ++ ++int ++main () ++{ ++return $ac_func (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ eval "$as_ac_var=yes" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ eval "$as_ac_var=no" ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++if test `eval echo '${'$as_ac_var'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 ++_ACEOF ++ ++fi ++done ++ ++ MSGFMT_OPTS= ++ { echo "$as_me:$LINENO: checking if msgfmt accepts -c" >&5 ++echo $ECHO_N "checking if msgfmt accepts -c... $ECHO_C" >&6; } ++ cat >conftest.foo <<_ACEOF ++ ++msgid "" ++msgstr "" ++"Content-Type: text/plain; charset=UTF-8\n" ++"Project-Id-Version: test 1.0\n" ++"PO-Revision-Date: 2007-02-15 12:01+0100\n" ++"Last-Translator: test \n" ++"Language-Team: C \n" ++"MIME-Version: 1.0\n" ++"Content-Transfer-Encoding: 8bit\n" ++ ++_ACEOF ++if { (echo "$as_me:$LINENO: \$MSGFMT -c -o /dev/null conftest.foo") >&5 ++ ($MSGFMT -c -o /dev/null conftest.foo) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ MSGFMT_OPTS=-c; { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++echo "$as_me: failed input was:" >&5 ++sed 's/^/| /' conftest.foo >&5 ++fi ++ ++ # Extract the first word of "gmsgfmt", so it can be a program name with args. ++set dummy gmsgfmt; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_GMSGFMT+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $GMSGFMT in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" ++ ;; ++esac ++fi ++GMSGFMT=$ac_cv_path_GMSGFMT ++if test -n "$GMSGFMT"; then ++ { echo "$as_me:$LINENO: result: $GMSGFMT" >&5 ++echo "${ECHO_T}$GMSGFMT" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ # Extract the first word of "xgettext", so it can be a program name with args. ++set dummy xgettext; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_XGETTEXT+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case "$XGETTEXT" in ++ /*) ++ ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. ++ ;; ++ *) ++ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" ++ for ac_dir in $PATH; do ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$ac_word; then ++ if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then ++ ac_cv_path_XGETTEXT="$ac_dir/$ac_word" ++ break ++ fi ++ fi ++ done ++ IFS="$ac_save_ifs" ++ test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" ++ ;; ++esac ++fi ++XGETTEXT="$ac_cv_path_XGETTEXT" ++if test "$XGETTEXT" != ":"; then ++ { echo "$as_me:$LINENO: result: $XGETTEXT" >&5 ++echo "${ECHO_T}$XGETTEXT" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++extern int _nl_msg_cat_cntr; ++ return _nl_msg_cat_cntr ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ CATOBJEXT=.gmo ++ DATADIRNAME=share ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ case $host in ++ *-*-solaris*) ++ { echo "$as_me:$LINENO: checking for bind_textdomain_codeset" >&5 ++echo $ECHO_N "checking for bind_textdomain_codeset... $ECHO_C" >&6; } ++if test "${ac_cv_func_bind_textdomain_codeset+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define bind_textdomain_codeset to an innocuous variant, in case declares bind_textdomain_codeset. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define bind_textdomain_codeset innocuous_bind_textdomain_codeset ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char bind_textdomain_codeset (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef bind_textdomain_codeset ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char bind_textdomain_codeset (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_bind_textdomain_codeset || defined __stub___bind_textdomain_codeset ++choke me ++#endif ++ ++int ++main () ++{ ++return bind_textdomain_codeset (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_bind_textdomain_codeset=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_func_bind_textdomain_codeset=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_bind_textdomain_codeset" >&5 ++echo "${ECHO_T}$ac_cv_func_bind_textdomain_codeset" >&6; } ++if test $ac_cv_func_bind_textdomain_codeset = yes; then ++ CATOBJEXT=.gmo ++ DATADIRNAME=share ++else ++ CATOBJEXT=.mo ++ DATADIRNAME=lib ++fi ++ ++ ;; ++ *) ++ CATOBJEXT=.mo ++ DATADIRNAME=lib ++ ;; ++ esac ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ LIBS="$glib_save_LIBS" ++ INSTOBJEXT=.mo ++ else ++ gt_cv_have_gettext=no ++ fi ++ fi ++ ++fi ++ ++ ++ ++ if test "$gt_cv_have_gettext" = "yes" ; then ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define ENABLE_NLS 1 ++_ACEOF ++ ++ fi ++ ++ if test "$XGETTEXT" != ":"; then ++ if $XGETTEXT --omit-header /dev/null 2> /dev/null; then ++ : ; ++ else ++ { echo "$as_me:$LINENO: result: found xgettext program is not GNU xgettext; ignore it" >&5 ++echo "${ECHO_T}found xgettext program is not GNU xgettext; ignore it" >&6; } ++ XGETTEXT=":" ++ fi ++ fi ++ ++ # We need to process the po/ directory. ++ POSUB=po ++ ++ ac_config_commands="$ac_config_commands default-1" ++ ++ ++ for lang in $ALL_LINGUAS; do ++ GMOFILES="$GMOFILES $lang.gmo" ++ POFILES="$POFILES $lang.po" ++ done ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ if test "$gt_cv_have_gettext" = "yes"; then ++ if test "x$ALL_LINGUAS" = "x"; then ++ LINGUAS= ++ else ++ { echo "$as_me:$LINENO: checking for catalogs to be installed" >&5 ++echo $ECHO_N "checking for catalogs to be installed... $ECHO_C" >&6; } ++ NEW_LINGUAS= ++ for presentlang in $ALL_LINGUAS; do ++ useit=no ++ if test "%UNSET%" != "${LINGUAS-%UNSET%}"; then ++ desiredlanguages="$LINGUAS" ++ else ++ desiredlanguages="$ALL_LINGUAS" ++ fi ++ for desiredlang in $desiredlanguages; do ++ # Use the presentlang catalog if desiredlang is ++ # a. equal to presentlang, or ++ # b. a variant of presentlang (because in this case, ++ # presentlang can be used as a fallback for messages ++ # which are not translated in the desiredlang catalog). ++ case "$desiredlang" in ++ "$presentlang"*) useit=yes;; ++ esac ++ done ++ if test $useit = yes; then ++ NEW_LINGUAS="$NEW_LINGUAS $presentlang" ++ fi ++ done ++ LINGUAS=$NEW_LINGUAS ++ { echo "$as_me:$LINENO: result: $LINGUAS" >&5 ++echo "${ECHO_T}$LINGUAS" >&6; } ++ fi ++ ++ if test -n "$LINGUAS"; then ++ for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done ++ fi ++ fi ++ ++ MKINSTALLDIRS= ++ if test -n "$ac_aux_dir"; then ++ MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" ++ fi ++ if test -z "$MKINSTALLDIRS"; then ++ MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" ++ fi ++ ++ ++ test -d po || mkdir po ++ if test "x$srcdir" != "x."; then ++ if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then ++ posrcprefix="$srcdir/" ++ else ++ posrcprefix="../$srcdir/" ++ fi ++ else ++ posrcprefix="../" ++ fi ++ rm -f po/POTFILES ++ sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ ++ < $srcdir/po/POTFILES.in > po/POTFILES ++ ++ ++GLIB_REQUIRED=2.13.0 ++GTK_REQUIRED=2.11.0 ++GDK_REQUIRED=2.11.0 ++GNOME_KEYRING_REQUIRED=0.6.0 ++LIBGNOME_REQUIRED=2.14.0 ++LIBGNOMEUI_REQUIRED=2.14.0 ++HAL_REQUIRED=0.5.8 ++DBUS_REQUIRED=0.70 ++LIBGLADE_REQUIRED=2.5.0 ++LIBNOTIFY_REQUIRED=0.4.3 ++LIBWNCK_REQUIRED=2.10.0 ++CAIRO_REQUIRED=1.0.0 ++UNIQUE_REQUIRED=0.9.4 ++LIBPANEL_REQUIRED=2.0.0 ++GSTREAMER_REQUIRED=0.10 ++XRANDR_REQUIRED=1.2.0 ++POLKIT_GNOME_REQUIRED=0.8 ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for GLIB" >&5 ++echo $ECHO_N "checking for GLIB... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GLIB_CFLAGS"; then ++ pkg_cv_GLIB_CFLAGS="$GLIB_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED gobject-2.0\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED gobject-2.0") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GLIB_CFLAGS=`$PKG_CONFIG --cflags "glib-2.0 >= $GLIB_REQUIRED gobject-2.0" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GLIB_LIBS"; then ++ pkg_cv_GLIB_LIBS="$GLIB_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED gobject-2.0\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED gobject-2.0") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GLIB_LIBS=`$PKG_CONFIG --libs "glib-2.0 >= $GLIB_REQUIRED gobject-2.0" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ GLIB_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "glib-2.0 >= $GLIB_REQUIRED gobject-2.0"` ++ else ++ GLIB_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "glib-2.0 >= $GLIB_REQUIRED gobject-2.0"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$GLIB_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements (glib-2.0 >= $GLIB_REQUIRED gobject-2.0) were not met: ++ ++$GLIB_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables GLIB_CFLAGS ++and GLIB_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (glib-2.0 >= $GLIB_REQUIRED gobject-2.0) were not met: ++ ++$GLIB_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables GLIB_CFLAGS ++and GLIB_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables GLIB_CFLAGS ++and GLIB_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables GLIB_CFLAGS ++and GLIB_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ GLIB_CFLAGS=$pkg_cv_GLIB_CFLAGS ++ GLIB_LIBS=$pkg_cv_GLIB_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for HAL" >&5 ++echo $ECHO_N "checking for HAL... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$HAL_CFLAGS"; then ++ pkg_cv_HAL_CFLAGS="$HAL_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"hal >= \$HAL_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "hal >= $HAL_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_HAL_CFLAGS=`$PKG_CONFIG --cflags "hal >= $HAL_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$HAL_LIBS"; then ++ pkg_cv_HAL_LIBS="$HAL_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"hal >= \$HAL_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "hal >= $HAL_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_HAL_LIBS=`$PKG_CONFIG --libs "hal >= $HAL_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ HAL_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "hal >= $HAL_REQUIRED"` ++ else ++ HAL_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "hal >= $HAL_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$HAL_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements (hal >= $HAL_REQUIRED) were not met: ++ ++$HAL_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables HAL_CFLAGS ++and HAL_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (hal >= $HAL_REQUIRED) were not met: ++ ++$HAL_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables HAL_CFLAGS ++and HAL_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables HAL_CFLAGS ++and HAL_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables HAL_CFLAGS ++and HAL_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ HAL_CFLAGS=$pkg_cv_HAL_CFLAGS ++ HAL_LIBS=$pkg_cv_HAL_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for GSTREAMER" >&5 ++echo $ECHO_N "checking for GSTREAMER... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GSTREAMER_CFLAGS"; then ++ pkg_cv_GSTREAMER_CFLAGS="$GSTREAMER_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gstreamer-0.10 >= \$GSTREAMER_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "gstreamer-0.10 >= $GSTREAMER_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GSTREAMER_CFLAGS=`$PKG_CONFIG --cflags "gstreamer-0.10 >= $GSTREAMER_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GSTREAMER_LIBS"; then ++ pkg_cv_GSTREAMER_LIBS="$GSTREAMER_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gstreamer-0.10 >= \$GSTREAMER_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "gstreamer-0.10 >= $GSTREAMER_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GSTREAMER_LIBS=`$PKG_CONFIG --libs "gstreamer-0.10 >= $GSTREAMER_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ GSTREAMER_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "gstreamer-0.10 >= $GSTREAMER_REQUIRED"` ++ else ++ GSTREAMER_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "gstreamer-0.10 >= $GSTREAMER_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$GSTREAMER_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements (gstreamer-0.10 >= $GSTREAMER_REQUIRED) were not met: ++ ++$GSTREAMER_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables GSTREAMER_CFLAGS ++and GSTREAMER_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (gstreamer-0.10 >= $GSTREAMER_REQUIRED) were not met: ++ ++$GSTREAMER_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables GSTREAMER_CFLAGS ++and GSTREAMER_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables GSTREAMER_CFLAGS ++and GSTREAMER_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables GSTREAMER_CFLAGS ++and GSTREAMER_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ GSTREAMER_CFLAGS=$pkg_cv_GSTREAMER_CFLAGS ++ GSTREAMER_LIBS=$pkg_cv_GSTREAMER_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for DBUS" >&5 ++echo $ECHO_N "checking for DBUS... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$DBUS_CFLAGS"; then ++ pkg_cv_DBUS_CFLAGS="$DBUS_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ dbus-glib-1 >= \$DBUS_REQUIRED ++ dbus-1 >= \$DBUS_REQUIRED ++ gthread-2.0\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_DBUS_CFLAGS=`$PKG_CONFIG --cflags " ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$DBUS_LIBS"; then ++ pkg_cv_DBUS_LIBS="$DBUS_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ dbus-glib-1 >= \$DBUS_REQUIRED ++ dbus-1 >= \$DBUS_REQUIRED ++ gthread-2.0\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_DBUS_LIBS=`$PKG_CONFIG --libs " ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ DBUS_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors " ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0"` ++ else ++ DBUS_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors " ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$DBUS_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements ( ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0) were not met: ++ ++$DBUS_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables DBUS_CFLAGS ++and DBUS_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements ( ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0) were not met: ++ ++$DBUS_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables DBUS_CFLAGS ++and DBUS_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables DBUS_CFLAGS ++and DBUS_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables DBUS_CFLAGS ++and DBUS_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ DBUS_CFLAGS=$pkg_cv_DBUS_CFLAGS ++ DBUS_LIBS=$pkg_cv_DBUS_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for GNOME" >&5 ++echo $ECHO_N "checking for GNOME... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GNOME_CFLAGS"; then ++ pkg_cv_GNOME_CFLAGS="$GNOME_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ libgnomeui-2.0 >= \$LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= \$LIBGLADE_REQUIRED ++ libwnck-1.0 >= \$LIBWNCK_REQUIRED ++ gtk+-2.0 >= \$GTK_REQUIRED ++ gnome-keyring-1 >= \$GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= \$LIBPANEL_REQUIRED ++ cairo >= \$CAIRO_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GNOME_CFLAGS=`$PKG_CONFIG --cflags " ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GNOME_LIBS"; then ++ pkg_cv_GNOME_LIBS="$GNOME_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ libgnomeui-2.0 >= \$LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= \$LIBGLADE_REQUIRED ++ libwnck-1.0 >= \$LIBWNCK_REQUIRED ++ gtk+-2.0 >= \$GTK_REQUIRED ++ gnome-keyring-1 >= \$GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= \$LIBPANEL_REQUIRED ++ cairo >= \$CAIRO_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GNOME_LIBS=`$PKG_CONFIG --libs " ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ GNOME_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors " ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED"` ++ else ++ GNOME_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors " ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$GNOME_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements ( ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED) were not met: ++ ++$GNOME_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables GNOME_CFLAGS ++and GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements ( ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED) were not met: ++ ++$GNOME_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables GNOME_CFLAGS ++and GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables GNOME_CFLAGS ++and GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables GNOME_CFLAGS ++and GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ GNOME_CFLAGS=$pkg_cv_GNOME_CFLAGS ++ GNOME_LIBS=$pkg_cv_GNOME_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for GDK" >&5 ++echo $ECHO_N "checking for GDK... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GDK_CFLAGS"; then ++ pkg_cv_GDK_CFLAGS="$GDK_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ gdk-2.0 >= \$GDK_REQUIRED ++ gdk-x11-2.0 >= \$GDK_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GDK_CFLAGS=`$PKG_CONFIG --cflags " ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GDK_LIBS"; then ++ pkg_cv_GDK_LIBS="$GDK_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ gdk-2.0 >= \$GDK_REQUIRED ++ gdk-x11-2.0 >= \$GDK_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GDK_LIBS=`$PKG_CONFIG --libs " ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ GDK_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors " ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED"` ++ else ++ GDK_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors " ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$GDK_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements ( ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED) were not met: ++ ++$GDK_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables GDK_CFLAGS ++and GDK_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements ( ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED) were not met: ++ ++$GDK_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables GDK_CFLAGS ++and GDK_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables GDK_CFLAGS ++and GDK_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables GDK_CFLAGS ++and GDK_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ GDK_CFLAGS=$pkg_cv_GDK_CFLAGS ++ GDK_LIBS=$pkg_cv_GDK_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for XRANDR" >&5 ++echo $ECHO_N "checking for XRANDR... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$XRANDR_CFLAGS"; then ++ pkg_cv_XRANDR_CFLAGS="$XRANDR_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ xrandr >= \$XRANDR_REQUIRED ++ xrender x11\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_XRANDR_CFLAGS=`$PKG_CONFIG --cflags " ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$XRANDR_LIBS"; then ++ pkg_cv_XRANDR_LIBS="$XRANDR_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ xrandr >= \$XRANDR_REQUIRED ++ xrender x11\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_XRANDR_LIBS=`$PKG_CONFIG --libs " ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ XRANDR_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors " ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11"` ++ else ++ XRANDR_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors " ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$XRANDR_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements ( ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11) were not met: ++ ++$XRANDR_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables XRANDR_CFLAGS ++and XRANDR_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements ( ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11) were not met: ++ ++$XRANDR_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables XRANDR_CFLAGS ++and XRANDR_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables XRANDR_CFLAGS ++and XRANDR_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables XRANDR_CFLAGS ++and XRANDR_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ XRANDR_CFLAGS=$pkg_cv_XRANDR_CFLAGS ++ XRANDR_LIBS=$pkg_cv_XRANDR_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ ++# Extract the first word of "gconftool-2", so it can be a program name with args. ++set dummy gconftool-2; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_GCONFTOOL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $GCONFTOOL in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_GCONFTOOL="$GCONFTOOL" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_GCONFTOOL="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++GCONFTOOL=$ac_cv_path_GCONFTOOL ++if test -n "$GCONFTOOL"; then ++ { echo "$as_me:$LINENO: result: $GCONFTOOL" >&5 ++echo "${ECHO_T}$GCONFTOOL" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ ++ if test "x$GCONF_SCHEMA_INSTALL_SOURCE" = "x"; then ++ GCONF_SCHEMA_CONFIG_SOURCE=`gconftool-2 --get-default-source` ++ else ++ GCONF_SCHEMA_CONFIG_SOURCE=$GCONF_SCHEMA_INSTALL_SOURCE ++ fi ++ ++ ++# Check whether --with-gconf-source was given. ++if test "${with_gconf_source+set}" = set; then ++ withval=$with_gconf_source; GCONF_SCHEMA_CONFIG_SOURCE="$withval" ++fi ++ ++ ++ ++ { echo "$as_me:$LINENO: result: Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation" >&5 ++echo "${ECHO_T}Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation" >&6; } ++ ++ if test "x$GCONF_SCHEMA_FILE_DIR" = "x"; then ++ GCONF_SCHEMA_FILE_DIR='$(sysconfdir)/gconf/schemas' ++ fi ++ ++ ++# Check whether --with-gconf-schema-file-dir was given. ++if test "${with_gconf_schema_file_dir+set}" = set; then ++ withval=$with_gconf_schema_file_dir; GCONF_SCHEMA_FILE_DIR="$withval" ++fi ++ ++ ++ ++ { echo "$as_me:$LINENO: result: Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files" >&5 ++echo "${ECHO_T}Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files" >&6; } ++ ++ # Check whether --enable-schemas-install was given. ++if test "${enable_schemas_install+set}" = set; then ++ enableval=$enable_schemas_install; case ${enableval} in ++ yes|no) ;; ++ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-schemas-install" >&5 ++echo "$as_me: error: bad value ${enableval} for --enable-schemas-install" >&2;} ++ { (exit 1); exit 1; }; } ;; ++ esac ++fi ++ ++ ++ ++if test "$enable_schemas_install" != no; then ++ GCONF_SCHEMAS_INSTALL_TRUE= ++ GCONF_SCHEMAS_INSTALL_FALSE='#' ++else ++ GCONF_SCHEMAS_INSTALL_TRUE='#' ++ GCONF_SCHEMAS_INSTALL_FALSE= ++fi ++ ++ ++ ++{ echo "$as_me:$LINENO: checking for X" >&5 ++echo $ECHO_N "checking for X... $ECHO_C" >&6; } ++ ++ ++# Check whether --with-x was given. ++if test "${with_x+set}" = set; then ++ withval=$with_x; ++fi ++ ++# $have_x is `yes', `no', `disabled', or empty when we do not yet know. ++if test "x$with_x" = xno; then ++ # The user explicitly disabled X. ++ have_x=disabled ++else ++ case $x_includes,$x_libraries in #( ++ *\'*) { { echo "$as_me:$LINENO: error: Cannot use X directory names containing '" >&5 ++echo "$as_me: error: Cannot use X directory names containing '" >&2;} ++ { (exit 1); exit 1; }; };; #( ++ *,NONE | NONE,*) if test "${ac_cv_have_x+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ # One or both of the vars are not set, and there is no cached value. ++ac_x_includes=no ac_x_libraries=no ++rm -f -r conftest.dir ++if mkdir conftest.dir; then ++ cd conftest.dir ++ cat >Imakefile <<'_ACEOF' ++incroot: ++ @echo incroot='${INCROOT}' ++usrlibdir: ++ @echo usrlibdir='${USRLIBDIR}' ++libdir: ++ @echo libdir='${LIBDIR}' ++_ACEOF ++ if (export CC; ${XMKMF-xmkmf}) >/dev/null 2>/dev/null && test -f Makefile; then ++ # GNU make sometimes prints "make[1]: Entering...", which would confuse us. ++ for ac_var in incroot usrlibdir libdir; do ++ eval "ac_im_$ac_var=\`\${MAKE-make} $ac_var 2>/dev/null | sed -n 's/^$ac_var=//p'\`" ++ done ++ # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. ++ for ac_extension in a so sl; do ++ if test ! -f "$ac_im_usrlibdir/libX11.$ac_extension" && ++ test -f "$ac_im_libdir/libX11.$ac_extension"; then ++ ac_im_usrlibdir=$ac_im_libdir; break ++ fi ++ done ++ # Screen out bogus values from the imake configuration. They are ++ # bogus both because they are the default anyway, and because ++ # using them would break gcc on systems where it needs fixed includes. ++ case $ac_im_incroot in ++ /usr/include) ac_x_includes= ;; ++ *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;; ++ esac ++ case $ac_im_usrlibdir in ++ /usr/lib | /lib) ;; ++ *) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;; ++ esac ++ fi ++ cd .. ++ rm -f -r conftest.dir ++fi ++ ++# Standard set of common directories for X headers. ++# Check X11 before X11Rn because it is often a symlink to the current release. ++ac_x_header_dirs=' ++/usr/X11/include ++/usr/X11R6/include ++/usr/X11R5/include ++/usr/X11R4/include ++ ++/usr/include/X11 ++/usr/include/X11R6 ++/usr/include/X11R5 ++/usr/include/X11R4 ++ ++/usr/local/X11/include ++/usr/local/X11R6/include ++/usr/local/X11R5/include ++/usr/local/X11R4/include ++ ++/usr/local/include/X11 ++/usr/local/include/X11R6 ++/usr/local/include/X11R5 ++/usr/local/include/X11R4 ++ ++/usr/X386/include ++/usr/x386/include ++/usr/XFree86/include/X11 ++ ++/usr/include ++/usr/local/include ++/usr/unsupported/include ++/usr/athena/include ++/usr/local/x11r5/include ++/usr/lpp/Xamples/include ++ ++/usr/openwin/include ++/usr/openwin/share/include' ++ ++if test "$ac_x_includes" = no; then ++ # Guess where to find include files, by looking for Xlib.h. ++ # First, try using that file with no special directory specified. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++@%:@include ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ # We can compile using X headers with no special include directory. ++ac_x_includes= ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ for ac_dir in $ac_x_header_dirs; do ++ if test -r "$ac_dir/X11/Xlib.h"; then ++ ac_x_includes=$ac_dir ++ break ++ fi ++done ++fi ++ ++rm -f conftest.err conftest.$ac_ext ++fi # $ac_x_includes = no ++ ++if test "$ac_x_libraries" = no; then ++ # Check for the libraries. ++ # See if we find them without any special options. ++ # Don't add to $LIBS permanently. ++ ac_save_LIBS=$LIBS ++ LIBS="-lX11 $LIBS" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++@%:@include ++int ++main () ++{ ++XrmInitialize () ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ LIBS=$ac_save_LIBS ++# We can link X programs with no special library path. ++ac_x_libraries= ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ LIBS=$ac_save_LIBS ++for ac_dir in `echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g` ++do ++ # Don't even attempt the hair of trying to link an X program! ++ for ac_extension in a so sl; do ++ if test -r "$ac_dir/libX11.$ac_extension"; then ++ ac_x_libraries=$ac_dir ++ break 2 ++ fi ++ done ++done ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi # $ac_x_libraries = no ++ ++case $ac_x_includes,$ac_x_libraries in #( ++ no,* | *,no | *\'*) ++ # Didn't find X, or a directory has "'" in its name. ++ ac_cv_have_x="have_x=no";; #( ++ *) ++ # Record where we found X for the cache. ++ ac_cv_have_x="have_x=yes\ ++ ac_x_includes='$ac_x_includes'\ ++ ac_x_libraries='$ac_x_libraries'" ++esac ++fi ++;; #( ++ *) have_x=yes;; ++ esac ++ eval "$ac_cv_have_x" ++fi # $with_x != no ++ ++if test "$have_x" != yes; then ++ { echo "$as_me:$LINENO: result: $have_x" >&5 ++echo "${ECHO_T}$have_x" >&6; } ++ no_x=yes ++else ++ # If each of the values was on the command line, it overrides each guess. ++ test "x$x_includes" = xNONE && x_includes=$ac_x_includes ++ test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries ++ # Update the cache value to reflect the command line values. ++ ac_cv_have_x="have_x=yes\ ++ ac_x_includes='$x_includes'\ ++ ac_x_libraries='$x_libraries'" ++ { echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5 ++echo "${ECHO_T}libraries $x_libraries, headers $x_includes" >&6; } ++fi ++ ++if test "$no_x" = yes; then ++ # Not all programs may use this symbol, but it does not hurt to define it. ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define X_DISPLAY_MISSING 1 ++_ACEOF ++ ++ X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS= ++else ++ if test -n "$x_includes"; then ++ X_CFLAGS="$X_CFLAGS -I$x_includes" ++ fi ++ ++ # It would also be nice to do this for all -L options, not just this one. ++ if test -n "$x_libraries"; then ++ X_LIBS="$X_LIBS -L$x_libraries" ++ # For Solaris; some versions of Sun CC require a space after -R and ++ # others require no space. Words are not sufficient . . . . ++ { echo "$as_me:$LINENO: checking whether -R must be followed by a space" >&5 ++echo $ECHO_N "checking whether -R must be followed by a space... $ECHO_C" >&6; } ++ ac_xsave_LIBS=$LIBS; LIBS="$LIBS -R$x_libraries" ++ ac_xsave_c_werror_flag=$ac_c_werror_flag ++ ac_c_werror_flag=yes ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ X_LIBS="$X_LIBS -R$x_libraries" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ LIBS="$ac_xsave_LIBS -R $x_libraries" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ X_LIBS="$X_LIBS -R $x_libraries" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ { echo "$as_me:$LINENO: result: neither works" >&5 ++echo "${ECHO_T}neither works" >&6; } ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ ac_c_werror_flag=$ac_xsave_c_werror_flag ++ LIBS=$ac_xsave_LIBS ++ fi ++ ++ # Check for system-dependent libraries X programs must link with. ++ # Do this before checking for the system-independent R6 libraries ++ # (-lICE), since we may need -lsocket or whatever for X linking. ++ ++ if test "$ISC" = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet" ++ else ++ # Martyn Johnson says this is needed for Ultrix, if the X ++ # libraries were built with DECnet support. And Karl Berry says ++ # the Alpha needs dnet_stub (dnet does not exist). ++ ac_xsave_LIBS="$LIBS"; LIBS="$LIBS $X_LIBS -lX11" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char XOpenDisplay (); ++int ++main () ++{ ++return XOpenDisplay (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ : ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ { echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet" >&5 ++echo $ECHO_N "checking for dnet_ntoa in -ldnet... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dnet_dnet_ntoa+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldnet $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dnet_ntoa (); ++int ++main () ++{ ++return dnet_ntoa (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dnet_dnet_ntoa=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_dnet_dnet_ntoa=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_dnet_ntoa" >&5 ++echo "${ECHO_T}$ac_cv_lib_dnet_dnet_ntoa" >&6; } ++if test $ac_cv_lib_dnet_dnet_ntoa = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet" ++fi ++ ++ if test $ac_cv_lib_dnet_dnet_ntoa = no; then ++ { echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet_stub" >&5 ++echo $ECHO_N "checking for dnet_ntoa in -ldnet_stub... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dnet_stub_dnet_ntoa+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldnet_stub $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dnet_ntoa (); ++int ++main () ++{ ++return dnet_ntoa (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dnet_stub_dnet_ntoa=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_dnet_stub_dnet_ntoa=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5 ++echo "${ECHO_T}$ac_cv_lib_dnet_stub_dnet_ntoa" >&6; } ++if test $ac_cv_lib_dnet_stub_dnet_ntoa = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub" ++fi ++ ++ fi ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ LIBS="$ac_xsave_LIBS" ++ ++ # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT, ++ # to get the SysV transport functions. ++ # Chad R. Larson says the Pyramis MIS-ES running DC/OSx (SVR4) ++ # needs -lnsl. ++ # The nsl library prevents programs from opening the X display ++ # on Irix 5.2, according to T.E. Dickey. ++ # The functions gethostbyname, getservbyname, and inet_addr are ++ # in -lbsd on LynxOS 3.0.1/i386, according to Lars Hecking. ++ { echo "$as_me:$LINENO: checking for gethostbyname" >&5 ++echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6; } ++if test "${ac_cv_func_gethostbyname+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define gethostbyname to an innocuous variant, in case declares gethostbyname. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define gethostbyname innocuous_gethostbyname ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char gethostbyname (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef gethostbyname ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char gethostbyname (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_gethostbyname || defined __stub___gethostbyname ++choke me ++#endif ++ ++int ++main () ++{ ++return gethostbyname (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_gethostbyname=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_func_gethostbyname=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5 ++echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6; } ++ ++ if test $ac_cv_func_gethostbyname = no; then ++ { echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 ++echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lnsl $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char gethostbyname (); ++int ++main () ++{ ++return gethostbyname (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_nsl_gethostbyname=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_nsl_gethostbyname=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5 ++echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6; } ++if test $ac_cv_lib_nsl_gethostbyname = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl" ++fi ++ ++ if test $ac_cv_lib_nsl_gethostbyname = no; then ++ { echo "$as_me:$LINENO: checking for gethostbyname in -lbsd" >&5 ++echo $ECHO_N "checking for gethostbyname in -lbsd... $ECHO_C" >&6; } ++if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lbsd $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char gethostbyname (); ++int ++main () ++{ ++return gethostbyname (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_bsd_gethostbyname=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_bsd_gethostbyname=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_gethostbyname" >&5 ++echo "${ECHO_T}$ac_cv_lib_bsd_gethostbyname" >&6; } ++if test $ac_cv_lib_bsd_gethostbyname = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -lbsd" ++fi ++ ++ fi ++ fi ++ ++ # lieder@skyler.mavd.honeywell.com says without -lsocket, ++ # socket/setsockopt and other routines are undefined under SCO ODT ++ # 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary ++ # on later versions), says Simon Leinen: it contains gethostby* ++ # variants that don't use the name server (or something). -lsocket ++ # must be given before -lnsl if both are needed. We assume that ++ # if connect needs -lnsl, so does gethostbyname. ++ { echo "$as_me:$LINENO: checking for connect" >&5 ++echo $ECHO_N "checking for connect... $ECHO_C" >&6; } ++if test "${ac_cv_func_connect+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define connect to an innocuous variant, in case declares connect. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define connect innocuous_connect ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char connect (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef connect ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char connect (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_connect || defined __stub___connect ++choke me ++#endif ++ ++int ++main () ++{ ++return connect (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_connect=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_func_connect=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5 ++echo "${ECHO_T}$ac_cv_func_connect" >&6; } ++ ++ if test $ac_cv_func_connect = no; then ++ { echo "$as_me:$LINENO: checking for connect in -lsocket" >&5 ++echo $ECHO_N "checking for connect in -lsocket... $ECHO_C" >&6; } ++if test "${ac_cv_lib_socket_connect+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lsocket $X_EXTRA_LIBS $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char connect (); ++int ++main () ++{ ++return connect (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_socket_connect=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_socket_connect=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_socket_connect" >&5 ++echo "${ECHO_T}$ac_cv_lib_socket_connect" >&6; } ++if test $ac_cv_lib_socket_connect = yes; then ++ X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS" ++fi ++ ++ fi ++ ++ # Guillermo Gomez says -lposix is necessary on A/UX. ++ { echo "$as_me:$LINENO: checking for remove" >&5 ++echo $ECHO_N "checking for remove... $ECHO_C" >&6; } ++if test "${ac_cv_func_remove+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define remove to an innocuous variant, in case declares remove. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define remove innocuous_remove ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char remove (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef remove ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char remove (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_remove || defined __stub___remove ++choke me ++#endif ++ ++int ++main () ++{ ++return remove (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_remove=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_func_remove=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_remove" >&5 ++echo "${ECHO_T}$ac_cv_func_remove" >&6; } ++ ++ if test $ac_cv_func_remove = no; then ++ { echo "$as_me:$LINENO: checking for remove in -lposix" >&5 ++echo $ECHO_N "checking for remove in -lposix... $ECHO_C" >&6; } ++if test "${ac_cv_lib_posix_remove+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lposix $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char remove (); ++int ++main () ++{ ++return remove (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_posix_remove=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_posix_remove=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_posix_remove" >&5 ++echo "${ECHO_T}$ac_cv_lib_posix_remove" >&6; } ++if test $ac_cv_lib_posix_remove = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix" ++fi ++ ++ fi ++ ++ # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. ++ { echo "$as_me:$LINENO: checking for shmat" >&5 ++echo $ECHO_N "checking for shmat... $ECHO_C" >&6; } ++if test "${ac_cv_func_shmat+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define shmat to an innocuous variant, in case declares shmat. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define shmat innocuous_shmat ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char shmat (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef shmat ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char shmat (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_shmat || defined __stub___shmat ++choke me ++#endif ++ ++int ++main () ++{ ++return shmat (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_shmat=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_func_shmat=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_shmat" >&5 ++echo "${ECHO_T}$ac_cv_func_shmat" >&6; } ++ ++ if test $ac_cv_func_shmat = no; then ++ { echo "$as_me:$LINENO: checking for shmat in -lipc" >&5 ++echo $ECHO_N "checking for shmat in -lipc... $ECHO_C" >&6; } ++if test "${ac_cv_lib_ipc_shmat+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lipc $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char shmat (); ++int ++main () ++{ ++return shmat (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_ipc_shmat=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_ipc_shmat=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_ipc_shmat" >&5 ++echo "${ECHO_T}$ac_cv_lib_ipc_shmat" >&6; } ++if test $ac_cv_lib_ipc_shmat = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc" ++fi ++ ++ fi ++ fi ++ ++ # Check for libraries that X11R6 Xt/Xaw programs need. ++ ac_save_LDFLAGS=$LDFLAGS ++ test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries" ++ # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to ++ # check for ICE first), but we must link in the order -lSM -lICE or ++ # we get undefined symbols. So assume we have SM if we have ICE. ++ # These have to be linked with before -lX11, unlike the other ++ # libraries we check for below, so use a different variable. ++ # John Interrante, Karl Berry ++ { echo "$as_me:$LINENO: checking for IceConnectionNumber in -lICE" >&5 ++echo $ECHO_N "checking for IceConnectionNumber in -lICE... $ECHO_C" >&6; } ++if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lICE $X_EXTRA_LIBS $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char IceConnectionNumber (); ++int ++main () ++{ ++return IceConnectionNumber (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_ICE_IceConnectionNumber=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_ICE_IceConnectionNumber=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5 ++echo "${ECHO_T}$ac_cv_lib_ICE_IceConnectionNumber" >&6; } ++if test $ac_cv_lib_ICE_IceConnectionNumber = yes; then ++ X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE" ++fi ++ ++ LDFLAGS=$ac_save_LDFLAGS ++ ++fi ++ ++ ++ALL_X_LIBS="$X_LIBS $X_PRE_LIBS -lX11 $X_EXTRA_LIBS" ++ ++SYSCONFDIR=$sysconfdir ++ ++DATADIR=$datadir ++ ++BINDIR=$bindir ++ ++SBINDIR=$sbindir ++ ++ ++ ++# Check whether --with-doc-dir was given. ++if test "${with_doc_dir+set}" = set; then ++ withval=$with_doc_dir; ++fi ++ ++ ++if ! test -z "$with_doc_dir"; then ++ DOCDIR="$with_doc_dir/gnome-power-manager-$VERSION" ++else ++ DOCDIR="$DATADIR/doc/gnome-power-manager-$VERSION" ++fi ++ ++ ++# Check whether --enable-policykit was given. ++if test "${enable_policykit+set}" = set; then ++ enableval=$enable_policykit; enable_policykit=$enableval ++else ++ enable_policykit=no ++fi ++ ++ ++{ echo "$as_me:$LINENO: checking whether to support PolicyKit" >&5 ++echo $ECHO_N "checking whether to support PolicyKit... $ECHO_C" >&6; } ++have_polkit=no ++if test x$enable_policykit = xyes ; then ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for POLKIT" >&5 ++echo $ECHO_N "checking for POLKIT... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$POLKIT_CFLAGS"; then ++ pkg_cv_POLKIT_CFLAGS="$POLKIT_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\\ ++ polkit-grant >= \$POLKIT_GNOME_REQUIRED\\ ++ polkit-dbus >= \$POLKIT_GNOME_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_POLKIT_CFLAGS=`$PKG_CONFIG --cflags "\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$POLKIT_LIBS"; then ++ pkg_cv_POLKIT_LIBS="$POLKIT_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\\ ++ polkit-grant >= \$POLKIT_GNOME_REQUIRED\\ ++ polkit-dbus >= \$POLKIT_GNOME_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_POLKIT_LIBS=`$PKG_CONFIG --libs "\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ POLKIT_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED"` ++ else ++ POLKIT_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$POLKIT_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements (\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED) were not met: ++ ++$POLKIT_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables POLKIT_CFLAGS ++and POLKIT_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED) were not met: ++ ++$POLKIT_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables POLKIT_CFLAGS ++and POLKIT_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables POLKIT_CFLAGS ++and POLKIT_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables POLKIT_CFLAGS ++and POLKIT_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ POLKIT_CFLAGS=$pkg_cv_POLKIT_CFLAGS ++ POLKIT_LIBS=$pkg_cv_POLKIT_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ have_polkit=yes ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_POLKIT 1 ++_ACEOF ++ ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++# Check whether --enable-checkfg was given. ++if test "${enable_checkfg+set}" = set; then ++ enableval=$enable_checkfg; enable_checkfg=$enableval ++else ++ enable_checkfg=no ++fi ++ ++ ++{ echo "$as_me:$LINENO: checking whether to use check-foreground-console" >&5 ++echo $ECHO_N "checking whether to use check-foreground-console... $ECHO_C" >&6; } ++have_checkfg=no ++if test x$enable_checkfg = xyes ; then ++ have_checkfg=yes ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_CHECK_FG 1 ++_ACEOF ++ ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++# Check whether --enable-xevents was given. ++if test "${enable_xevents+set}" = set; then ++ enableval=$enable_xevents; enable_xevents=$enableval ++else ++ enable_xevents=yes ++fi ++ ++ ++{ echo "$as_me:$LINENO: checking whether to support xevents" >&5 ++echo $ECHO_N "checking whether to support xevents... $ECHO_C" >&6; } ++have_xevents=no ++if test x$enable_xevents = xyes ; then ++ have_xevents=yes ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_XEVENTS 1 ++_ACEOF ++ ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++# Check whether --enable-tests was given. ++if test "${enable_tests+set}" = set; then ++ enableval=$enable_tests; enable_tests=$enableval ++else ++ enable_tests=no ++fi ++ ++ ++{ echo "$as_me:$LINENO: checking whether to support tests" >&5 ++echo $ECHO_N "checking whether to support tests... $ECHO_C" >&6; } ++have_tests=no ++if test x$enable_tests = xyes ; then ++ have_tests=yes ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_TESTS 1 ++_ACEOF ++ ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++if test $have_tests = yes; then ++ HAVE_TESTS_TRUE= ++ HAVE_TESTS_FALSE='#' ++else ++ HAVE_TESTS_TRUE='#' ++ HAVE_TESTS_FALSE= ++fi ++ ++ ++# Check whether --enable-gconf-defaults was given. ++if test "${enable_gconf_defaults+set}" = set; then ++ enableval=$enable_gconf_defaults; enable_gconfdefaults=$enableval ++else ++ enable_gconfdefaults=yes ++fi ++ ++ ++{ echo "$as_me:$LINENO: checking whether to support gconf defaults" >&5 ++echo $ECHO_N "checking whether to support gconf defaults... $ECHO_C" >&6; } ++have_gconfdefaults=no ++if test x$enable_gconfdefaults = xyes ; then ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for POLKIT_GNOME" >&5 ++echo $ECHO_N "checking for POLKIT_GNOME... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$POLKIT_GNOME_CFLAGS"; then ++ pkg_cv_POLKIT_GNOME_CFLAGS="$POLKIT_GNOME_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ polkit-gnome >= \$POLKIT_GNOME_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_POLKIT_GNOME_CFLAGS=`$PKG_CONFIG --cflags " ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$POLKIT_GNOME_LIBS"; then ++ pkg_cv_POLKIT_GNOME_LIBS="$POLKIT_GNOME_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ polkit-gnome >= \$POLKIT_GNOME_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_POLKIT_GNOME_LIBS=`$PKG_CONFIG --libs " ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ POLKIT_GNOME_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors " ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED"` ++ else ++ POLKIT_GNOME_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors " ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$POLKIT_GNOME_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements ( ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED) were not met: ++ ++$POLKIT_GNOME_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables POLKIT_GNOME_CFLAGS ++and POLKIT_GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements ( ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED) were not met: ++ ++$POLKIT_GNOME_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables POLKIT_GNOME_CFLAGS ++and POLKIT_GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables POLKIT_GNOME_CFLAGS ++and POLKIT_GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables POLKIT_GNOME_CFLAGS ++and POLKIT_GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ POLKIT_GNOME_CFLAGS=$pkg_cv_POLKIT_GNOME_CFLAGS ++ POLKIT_GNOME_LIBS=$pkg_cv_POLKIT_GNOME_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ have_gconfdefaults=yes ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_GCONF_DEFAULTS 1 ++_ACEOF ++ ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++if test $have_gconfdefaults = yes; then ++ HAVE_GCONF_DEFAULTS_TRUE= ++ HAVE_GCONF_DEFAULTS_FALSE='#' ++else ++ HAVE_GCONF_DEFAULTS_TRUE='#' ++ HAVE_GCONF_DEFAULTS_FALSE= ++fi ++ ++ ++# Check whether --enable-applets was given. ++if test "${enable_applets+set}" = set; then ++ enableval=$enable_applets; enable_applets=$enableval ++else ++ enable_applets=yes ++fi ++ ++ ++{ echo "$as_me:$LINENO: checking whether to build applet support" >&5 ++echo $ECHO_N "checking whether to build applet support... $ECHO_C" >&6; } ++have_applets=no ++if test x$enable_applets = xyes ; then ++ have_applets=yes ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_APPLETS 1 ++_ACEOF ++ ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++if test $have_applets = yes; then ++ HAVE_APPLETS_TRUE= ++ HAVE_APPLETS_FALSE='#' ++else ++ HAVE_APPLETS_TRUE='#' ++ HAVE_APPLETS_FALSE= ++fi ++ ++ ++# Check whether --enable-docbook-docs was given. ++if test "${enable_docbook_docs+set}" = set; then ++ enableval=$enable_docbook_docs; enable_docbook_docs=$enableval ++else ++ enable_docbook_docs=auto ++fi ++ ++ ++# Extract the first word of "xmlto", so it can be a program name with args. ++set dummy xmlto; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_XMLTO+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $XMLTO in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_XMLTO="$XMLTO" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_XMLTO="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ test -z "$ac_cv_path_XMLTO" && ac_cv_path_XMLTO="no" ++ ;; ++esac ++fi ++XMLTO=$ac_cv_path_XMLTO ++if test -n "$XMLTO"; then ++ { echo "$as_me:$LINENO: result: $XMLTO" >&5 ++echo "${ECHO_T}$XMLTO" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++{ echo "$as_me:$LINENO: checking whether to build DocBook documentation" >&5 ++echo $ECHO_N "checking whether to build DocBook documentation... $ECHO_C" >&6; } ++if test x$XMLTO = xno ; then ++ have_docbook=no ++else ++ have_docbook=yes ++fi ++if test x$enable_docbook_docs = xauto ; then ++ if test x$have_docbook = xno ; then ++ enable_docbook_docs=no ++ else ++ enable_docbook_docs=yes ++ fi ++fi ++if test x$enable_docbook_docs = xyes; then ++ if test x$have_docbook = xno; then ++ { { echo "$as_me:$LINENO: error: Building DocBook docs explicitly required, but DocBook not found" >&5 ++echo "$as_me: error: Building DocBook docs explicitly required, but DocBook not found" >&2;} ++ { (exit 1); exit 1; }; } ++ fi ++fi ++ ++ ++if test x$enable_docbook_docs = xyes; then ++ DOCBOOK_DOCS_ENABLED_TRUE= ++ DOCBOOK_DOCS_ENABLED_FALSE='#' ++else ++ DOCBOOK_DOCS_ENABLED_TRUE='#' ++ DOCBOOK_DOCS_ENABLED_FALSE= ++fi ++ ++{ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ ++ ++# Check whether --with-dbus-services was given. ++if test "${with_dbus_services+set}" = set; then ++ withval=$with_dbus_services; ++fi ++ ++ ++if ! test -z "$with_dbus_services" ; then ++ DBUS_SERVICES_DIR="$with_dbus_services" ++else ++ # D-BUS 0.23 and higher use $prefix/share/dbus-1/services ++ DBUS_SERVICES_DIR="$DATADIR/dbus-1/services" ++fi ++ ++ ++if $PKG_CONFIG --atleast-version $LIBNOTIFY_REQUIRED libnotify; then ++ have_libnotify=yes ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for LIBNOTIFY" >&5 ++echo $ECHO_N "checking for LIBNOTIFY... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$LIBNOTIFY_CFLAGS"; then ++ pkg_cv_LIBNOTIFY_CFLAGS="$LIBNOTIFY_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libnotify >= \$LIBNOTIFY_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "libnotify >= $LIBNOTIFY_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_LIBNOTIFY_CFLAGS=`$PKG_CONFIG --cflags "libnotify >= $LIBNOTIFY_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$LIBNOTIFY_LIBS"; then ++ pkg_cv_LIBNOTIFY_LIBS="$LIBNOTIFY_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libnotify >= \$LIBNOTIFY_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "libnotify >= $LIBNOTIFY_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_LIBNOTIFY_LIBS=`$PKG_CONFIG --libs "libnotify >= $LIBNOTIFY_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ LIBNOTIFY_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "libnotify >= $LIBNOTIFY_REQUIRED"` ++ else ++ LIBNOTIFY_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libnotify >= $LIBNOTIFY_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$LIBNOTIFY_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements (libnotify >= $LIBNOTIFY_REQUIRED) were not met: ++ ++$LIBNOTIFY_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables LIBNOTIFY_CFLAGS ++and LIBNOTIFY_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (libnotify >= $LIBNOTIFY_REQUIRED) were not met: ++ ++$LIBNOTIFY_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables LIBNOTIFY_CFLAGS ++and LIBNOTIFY_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables LIBNOTIFY_CFLAGS ++and LIBNOTIFY_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables LIBNOTIFY_CFLAGS ++and LIBNOTIFY_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ LIBNOTIFY_CFLAGS=$pkg_cv_LIBNOTIFY_CFLAGS ++ LIBNOTIFY_LIBS=$pkg_cv_LIBNOTIFY_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_LIBNOTIFY 1 ++_ACEOF ++ ++else ++ have_libnotify=no ++fi ++ ++ ++if test $have_libnotify = yes; then ++ HAVE_LIBNOTIFY_TRUE= ++ HAVE_LIBNOTIFY_FALSE='#' ++else ++ HAVE_LIBNOTIFY_TRUE='#' ++ HAVE_LIBNOTIFY_FALSE= ++fi ++ ++ ++if $PKG_CONFIG --atleast-version $UNIQUE_REQUIRED unique-1.0; then ++ have_unique=yes ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for UNIQUE" >&5 ++echo $ECHO_N "checking for UNIQUE... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$UNIQUE_CFLAGS"; then ++ pkg_cv_UNIQUE_CFLAGS="$UNIQUE_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"unique-1.0 >= \$UNIQUE_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "unique-1.0 >= $UNIQUE_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_UNIQUE_CFLAGS=`$PKG_CONFIG --cflags "unique-1.0 >= $UNIQUE_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$UNIQUE_LIBS"; then ++ pkg_cv_UNIQUE_LIBS="$UNIQUE_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"unique-1.0 >= \$UNIQUE_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "unique-1.0 >= $UNIQUE_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_UNIQUE_LIBS=`$PKG_CONFIG --libs "unique-1.0 >= $UNIQUE_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ UNIQUE_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "unique-1.0 >= $UNIQUE_REQUIRED"` ++ else ++ UNIQUE_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "unique-1.0 >= $UNIQUE_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$UNIQUE_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements (unique-1.0 >= $UNIQUE_REQUIRED) were not met: ++ ++$UNIQUE_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables UNIQUE_CFLAGS ++and UNIQUE_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (unique-1.0 >= $UNIQUE_REQUIRED) were not met: ++ ++$UNIQUE_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables UNIQUE_CFLAGS ++and UNIQUE_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables UNIQUE_CFLAGS ++and UNIQUE_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables UNIQUE_CFLAGS ++and UNIQUE_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ UNIQUE_CFLAGS=$pkg_cv_UNIQUE_CFLAGS ++ UNIQUE_LIBS=$pkg_cv_UNIQUE_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_UNIQUE 1 ++_ACEOF ++ ++else ++ have_unique=no ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_UNIQUE 0 ++_ACEOF ++ ++fi ++ ++ ++if test $have_unique = yes; then ++ HAVE_UNIQUE_TRUE= ++ HAVE_UNIQUE_FALSE='#' ++else ++ HAVE_UNIQUE_TRUE='#' ++ HAVE_UNIQUE_FALSE= ++fi ++ ++ ++ ++# Like AC_CHECK_HEADER, but it uses the already-computed -I directories. ++# ++ ++ ++# Like AC_TRY_COMPILE, but it uses the already-computed -I directories. ++# ++ ++ ++ ++# Like AC_CHECK_LIB, but it uses the already-computed -I and -L directories. ++# Use this sparingly; it probably doesn't work very well on X programs. ++# ++ ++ ++ ++# Usage: HANDLE_X_PATH_ARG([variable_name], ++# [--command-line-option], ++# [descriptive string]) ++# ++# All of the --with options take three forms: ++# ++# --with-foo (or --with-foo=yes) ++# --without-foo (or --with-foo=no) ++# --with-foo=/DIR ++# ++# This function, HANDLE_X_PATH_ARG, deals with the /DIR case. When it sees ++# a directory (string beginning with a slash) it checks to see whether ++# /DIR/include and /DIR/lib exist, and adds them to $X_CFLAGS and $X_LIBS ++# as appropriate. ++# ++ ++ ++ ++ ++have_dpms=no ++with_dpms_req=unspecified ++GPM_EXTRA_LIBS="-lresolv" ++ ++ ++# Check whether --with-dpms-ext was given. ++if test "${with_dpms_ext+set}" = set; then ++ withval=$with_dpms_ext; with_dpms="$withval"; with_dpms_req="$withval" ++else ++ with_dpms=yes ++fi ++ ++ ++ ++ case "$with_dpms" in ++ yes) ;; ++ no) ;; ++ ++ /*) ++ { echo "$as_me:$LINENO: checking for DPMS headers" >&5 ++echo $ECHO_N "checking for DPMS headers... $ECHO_C" >&6; } ++ d=$with_dpms/include ++ if test -d $d; then ++ X_CFLAGS="-I$d $X_CFLAGS" ++ { echo "$as_me:$LINENO: result: $d" >&5 ++echo "${ECHO_T}$d" >&6; } ++ else ++ { echo "$as_me:$LINENO: result: not found ($d: no such directory)" >&5 ++echo "${ECHO_T}not found ($d: no such directory)" >&6; } ++ fi ++ ++ { echo "$as_me:$LINENO: checking for DPMS libs" >&5 ++echo $ECHO_N "checking for DPMS libs... $ECHO_C" >&6; } ++ d=$with_dpms/lib ++ if test -d $d; then ++ X_LIBS="-L$d $X_LIBS" ++ { echo "$as_me:$LINENO: result: $d" >&5 ++echo "${ECHO_T}$d" >&6; } ++ else ++ { echo "$as_me:$LINENO: result: not found ($d: no such directory)" >&5 ++echo "${ECHO_T}not found ($d: no such directory)" >&6; } ++ fi ++ ++ # replace the directory string with "yes". ++ with_dpms_req="yes" ++ with_dpms=$with_dpms_req ++ ;; ++ ++ *) ++ echo "" ++ echo "error: argument to --with-dpms-ext must be \"yes\", \"no\", or a directory." ++ echo " If it is a directory, then \`DIR/include' will be added to" ++ echo " the -I list, and \`DIR/lib' will be added to the -L list." ++ exit 1 ++ ;; ++ esac ++ ++ ++if test "$with_dpms" = yes; then ++ ++ # first check for dpms.h ++ ++ ac_save_CPPFLAGS="$CPPFLAGS" ++ if test \! -z "$includedir" ; then ++ CPPFLAGS="$CPPFLAGS -I$includedir" ++ fi ++ CPPFLAGS="$CPPFLAGS $X_CFLAGS" ++ { echo "$as_me:$LINENO: checking for X11/extensions/dpms.h" >&5 ++echo $ECHO_N "checking for X11/extensions/dpms.h... $ECHO_C" >&6; } ++if test "${ac_cv_header_X11_extensions_dpms_h+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++ #include ++ ++@%:@include ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_header_X11_extensions_dpms_h=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_header_X11_extensions_dpms_h=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_header_X11_extensions_dpms_h" >&5 ++echo "${ECHO_T}$ac_cv_header_X11_extensions_dpms_h" >&6; } ++if test $ac_cv_header_X11_extensions_dpms_h = yes; then ++ have_dpms=yes ++fi ++ ++ ++ CPPFLAGS="$ac_save_CPPFLAGS" ++ ++ # if that succeeded, then check for the DPMS code in the libraries ++ if test "$have_dpms" = yes; then ++ ++ # first look in -lXext (this is where it is with XFree86 4.0) ++ have_dpms=no ++ ++ ac_save_CPPFLAGS="$CPPFLAGS" ++ ac_save_LDFLAGS="$LDFLAGS" ++# ac_save_LIBS="$LIBS" ++ ++ if test \! -z "$includedir" ; then ++ CPPFLAGS="$CPPFLAGS -I$includedir" ++ fi ++ # note: $X_CFLAGS includes $x_includes ++ CPPFLAGS="$CPPFLAGS $X_CFLAGS" ++ ++ if test \! -z "$libdir" ; then ++ LDFLAGS="$LDFLAGS -L$libdir" ++ fi ++ # note: $X_LIBS includes $x_libraries ++ LDFLAGS="$LDFLAGS $ALL_X_LIBS" ++ ++ { echo "$as_me:$LINENO: checking for DPMSInfo in -lXext" >&5 ++echo $ECHO_N "checking for DPMSInfo in -lXext... $ECHO_C" >&6; } ++if test "${ac_cv_lib_Xext_DPMSInfo+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lXext -lXext -lX11 $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char DPMSInfo (); ++int ++main () ++{ ++return DPMSInfo (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_Xext_DPMSInfo=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_Xext_DPMSInfo=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_Xext_DPMSInfo" >&5 ++echo "${ECHO_T}$ac_cv_lib_Xext_DPMSInfo" >&6; } ++if test $ac_cv_lib_Xext_DPMSInfo = yes; then ++ have_dpms=yes ++else ++ true ++fi ++ ++ CPPFLAGS="$ac_save_CPPFLAGS" ++ LDFLAGS="$ac_save_LDFLAGS" ++# LIBS="$ac_save_LIBS" ++ ++ ++ # if that failed, look in -lXdpms (this is where it was in XFree86 3.x) ++ if test "$have_dpms" = no; then ++ ++ ac_save_CPPFLAGS="$CPPFLAGS" ++ ac_save_LDFLAGS="$LDFLAGS" ++# ac_save_LIBS="$LIBS" ++ ++ if test \! -z "$includedir" ; then ++ CPPFLAGS="$CPPFLAGS -I$includedir" ++ fi ++ # note: $X_CFLAGS includes $x_includes ++ CPPFLAGS="$CPPFLAGS $X_CFLAGS" ++ ++ if test \! -z "$libdir" ; then ++ LDFLAGS="$LDFLAGS -L$libdir" ++ fi ++ # note: $X_LIBS includes $x_libraries ++ LDFLAGS="$LDFLAGS $ALL_X_LIBS" ++ ++ { echo "$as_me:$LINENO: checking for DPMSInfo in -lXdpms" >&5 ++echo $ECHO_N "checking for DPMSInfo in -lXdpms... $ECHO_C" >&6; } ++if test "${ac_cv_lib_Xdpms_DPMSInfo+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lXdpms -lXext -lX11 $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char DPMSInfo (); ++int ++main () ++{ ++return DPMSInfo (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_Xdpms_DPMSInfo=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_Xdpms_DPMSInfo=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_Xdpms_DPMSInfo" >&5 ++echo "${ECHO_T}$ac_cv_lib_Xdpms_DPMSInfo" >&6; } ++if test $ac_cv_lib_Xdpms_DPMSInfo = yes; then ++ have_dpms=yes; XDPMS_LIBS="-lXdpms" ++else ++ true ++fi ++ ++ CPPFLAGS="$ac_save_CPPFLAGS" ++ LDFLAGS="$ac_save_LDFLAGS" ++# LIBS="$ac_save_LIBS" ++ ++ fi ++ fi ++ ++ ++ # if that succeeded, then we've really got it. ++ if test "$have_dpms" = yes; then ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_DPMS_EXTENSION 1 ++_ACEOF ++ ++ GPM_EXTRA_LIBS="$GPM_EXTRA_LIBS -lXext" ++ fi ++ ++elif test "$with_dpms" != no; then ++ echo "error: must be yes or no: --with-dpms-ext=$with_dpms" ++ exit 1 ++fi ++ ++{ echo "$as_me:$LINENO: checking for Solaris kstat" >&5 ++echo $ECHO_N "checking for Solaris kstat... $ECHO_C" >&6; } ++{ echo "$as_me:$LINENO: checking for kstat_open in -lkstat" >&5 ++echo $ECHO_N "checking for kstat_open in -lkstat... $ECHO_C" >&6; } ++if test "${ac_cv_lib_kstat_kstat_open+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lkstat $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char kstat_open (); ++int ++main () ++{ ++return kstat_open (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_kstat_kstat_open=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_kstat_kstat_open=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_kstat_kstat_open" >&5 ++echo "${ECHO_T}$ac_cv_lib_kstat_kstat_open" >&6; } ++if test $ac_cv_lib_kstat_kstat_open = yes; then ++ ++ ++cat >>confdefs.h <<\_ACEOF ++@%:@define HAVE_KSTAT 1 ++_ACEOF ++ ++ GPM_EXTRA_LIBS="$GPM_EXTRA_LIBS -lkstat" ++ ++fi ++ ++ ++ ++# Extract the first word of "docbook2man", so it can be a program name with args. ++set dummy docbook2man; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_DOCBOOK2MAN+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $DOCBOOK2MAN in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_DOCBOOK2MAN="$DOCBOOK2MAN" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_DOCBOOK2MAN="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ test -z "$ac_cv_path_DOCBOOK2MAN" && ac_cv_path_DOCBOOK2MAN="no" ++ ;; ++esac ++fi ++DOCBOOK2MAN=$ac_cv_path_DOCBOOK2MAN ++if test -n "$DOCBOOK2MAN"; then ++ { echo "$as_me:$LINENO: result: $DOCBOOK2MAN" >&5 ++echo "${ECHO_T}$DOCBOOK2MAN" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++if test "$DOCBOOK2MAN" = "no" ; then ++ { echo "$as_me:$LINENO: WARNING: docbook2man not found, will not be able to build man documentation" >&5 ++echo "$as_me: WARNING: docbook2man not found, will not be able to build man documentation" >&2;} ++fi ++ ++ ++if test "$DOCBOOK2MAN" != "no"; then ++ HAVE_DOCBOOK2MAN_TRUE= ++ HAVE_DOCBOOK2MAN_FALSE='#' ++else ++ HAVE_DOCBOOK2MAN_TRUE='#' ++ HAVE_DOCBOOK2MAN_FALSE= ++fi ++ ++ ++ ++# Check whether --enable-more-warnings was given. ++if test "${enable_more_warnings+set}" = set; then ++ enableval=$enable_more_warnings; set_more_warnings="$enableval" ++else ++ ++if test -d $srcdir/CVS; then ++ is_cvs_version=true ++ set_more_warnings=yes ++else ++ set_more_warnings=no ++fi ++ ++fi ++ ++{ echo "$as_me:$LINENO: checking for more warnings" >&5 ++echo $ECHO_N "checking for more warnings... $ECHO_C" >&6; } ++if test "$GCC" = "yes" -a "$set_more_warnings" != "no"; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ CFLAGS="\ ++ -Wall \ ++ -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes \ ++ -Wnested-externs -Wpointer-arith \ ++ -Wcast-align -Wsign-compare \ ++ $CFLAGS" ++ ++ for option in -Wno-strict-aliasing -Wno-sign-compare; do ++ SAVE_CFLAGS="$CFLAGS" ++ CFLAGS="$CFLAGS $option" ++ { echo "$as_me:$LINENO: checking whether gcc understands $option" >&5 ++echo $ECHO_N "checking whether gcc understands $option... $ECHO_C" >&6; } ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ has_option=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ has_option=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ if test $has_option = no; then ++ CFLAGS="$SAVE_CFLAGS" ++ fi ++ { echo "$as_me:$LINENO: result: $has_option" >&5 ++echo "${ECHO_T}$has_option" >&6; } ++ unset has_option ++ unset SAVE_CFLAGS ++ done ++ unset option ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ac_config_files="$ac_config_files Makefile src/Makefile src/dbus/Makefile applets/Makefile applets/brightness/Makefile applets/inhibit/Makefile libhal-glib/Makefile libdbus-glib/Makefile libidletime/Makefile libunique/Makefile docs/Makefile man/Makefile help/Makefile po/Makefile.in tools/Makefile test/Makefile data/Makefile data/gnome-power-manager.desktop.in data/gnome-power-preferences.desktop.in data/gnome-power-statistics.desktop.in data/sounds/Makefile data/icons/Makefile data/icons/16x16/Makefile data/icons/16x16/actions/Makefile data/icons/16x16/apps/Makefile data/icons/16x16/status/Makefile data/icons/22x22/Makefile data/icons/22x22/actions/Makefile data/icons/22x22/apps/Makefile data/icons/22x22/status/Makefile data/icons/24x24/Makefile data/icons/24x24/actions/Makefile data/icons/24x24/apps/Makefile data/icons/24x24/status/Makefile data/icons/48x48/Makefile data/icons/48x48/actions/Makefile data/icons/48x48/apps/Makefile data/icons/48x48/status/Makefile data/icons/scalable/Makefile data/icons/scalable/actions/Makefile data/icons/scalable/apps/Makefile data/icons/scalable/status/Makefile" ++ ++ ++cat >confcache <<\_ACEOF ++# This file is a shell script that caches the results of configure ++# tests run on this system so they can be shared between configure ++# scripts and configure runs, see configure's option --config-cache. ++# It is not useful on other systems. If it contains results you don't ++# want to keep, you may remove or edit it. ++# ++# config.status only pays attention to the cache file if you give it ++# the --recheck option to rerun configure. ++# ++# `ac_cv_env_foo' variables (set or unset) will be overridden when ++# loading this file, other *unset* `ac_cv_foo' will be assigned the ++# following values. ++ ++_ACEOF ++ ++# The following way of writing the cache mishandles newlines in values, ++# but we know of no workaround that is simple, portable, and efficient. ++# So, we kill variables containing newlines. ++# Ultrix sh set writes to stderr and can't be redirected directly, ++# and sets the high bit in the cache file unless we assign to the vars. ++( ++ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ *) $as_unset $ac_var ;; ++ esac ;; ++ esac ++ done ++ ++ (set) 2>&1 | ++ case $as_nl`(ac_space=' '; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) ++ # `set' does not quote correctly, so add quotes (double-quote ++ # substitution turns \\\\ into \\, and sed turns \\ into \). ++ sed -n \ ++ "s/'/'\\\\''/g; ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ++ ;; #( ++ *) ++ # `set' quotes correctly as required by POSIX, so do not add quotes. ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ++ ;; ++ esac | ++ sort ++) | ++ sed ' ++ /^ac_cv_env_/b end ++ t clear ++ :clear ++ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ ++ t end ++ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ ++ :end' >>confcache ++if diff "$cache_file" confcache >/dev/null 2>&1; then :; else ++ if test -w "$cache_file"; then ++ test "x$cache_file" != "x/dev/null" && ++ { echo "$as_me:$LINENO: updating cache $cache_file" >&5 ++echo "$as_me: updating cache $cache_file" >&6;} ++ cat confcache >$cache_file ++ else ++ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 ++echo "$as_me: not updating unwritable cache $cache_file" >&6;} ++ fi ++fi ++rm -f confcache ++ ++test "x$prefix" = xNONE && prefix=$ac_default_prefix ++# Let make expand exec_prefix. ++test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' ++ ++DEFS=-DHAVE_CONFIG_H ++ ++ac_libobjs= ++ac_ltlibobjs= ++for ac_i in : $LIB@&t@OBJS; do test "x$ac_i" = x: && continue ++ # 1. Remove the extension, and $U if already installed. ++ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ++ ac_i=`echo "$ac_i" | sed "$ac_script"` ++ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR ++ # will be set to the directory where LIBOBJS objects are built. ++ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" ++ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' ++done ++LIB@&t@OBJS=$ac_libobjs ++ ++LTLIBOBJS=$ac_ltlibobjs ++ ++ ++if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"AMDEP\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++ ac_config_commands="$ac_config_commands po/stamp-it" ++ ++ ++if test -z "${ENABLE_SK_TRUE}" && test -z "${ENABLE_SK_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"ENABLE_SK\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"ENABLE_SK\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${HAVE_GNOME_DOC_UTILS_TRUE}" && test -z "${HAVE_GNOME_DOC_UTILS_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_GNOME_DOC_UTILS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"HAVE_GNOME_DOC_UTILS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${GCONF_SCHEMAS_INSTALL_TRUE}" && test -z "${GCONF_SCHEMAS_INSTALL_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"GCONF_SCHEMAS_INSTALL\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"GCONF_SCHEMAS_INSTALL\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${HAVE_TESTS_TRUE}" && test -z "${HAVE_TESTS_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_TESTS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"HAVE_TESTS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${HAVE_GCONF_DEFAULTS_TRUE}" && test -z "${HAVE_GCONF_DEFAULTS_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_GCONF_DEFAULTS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"HAVE_GCONF_DEFAULTS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${HAVE_APPLETS_TRUE}" && test -z "${HAVE_APPLETS_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_APPLETS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"HAVE_APPLETS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${DOCBOOK_DOCS_ENABLED_TRUE}" && test -z "${DOCBOOK_DOCS_ENABLED_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"DOCBOOK_DOCS_ENABLED\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"DOCBOOK_DOCS_ENABLED\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${HAVE_LIBNOTIFY_TRUE}" && test -z "${HAVE_LIBNOTIFY_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_LIBNOTIFY\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"HAVE_LIBNOTIFY\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${HAVE_UNIQUE_TRUE}" && test -z "${HAVE_UNIQUE_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_UNIQUE\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"HAVE_UNIQUE\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${HAVE_DOCBOOK2MAN_TRUE}" && test -z "${HAVE_DOCBOOK2MAN_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_DOCBOOK2MAN\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"HAVE_DOCBOOK2MAN\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++: ${CONFIG_STATUS=./config.status} ++ac_clean_files_save=$ac_clean_files ++ac_clean_files="$ac_clean_files $CONFIG_STATUS" ++{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 ++echo "$as_me: creating $CONFIG_STATUS" >&6;} ++cat >$CONFIG_STATUS <<_ACEOF ++#! $SHELL ++# Generated by $as_me. ++# Run this file to recreate the current configuration. ++# Compiler output produced by configure, useful for debugging ++# configure, is in config.log if it exists. ++ ++debug=false ++ac_cs_recheck=false ++ac_cs_silent=false ++SHELL=\${CONFIG_SHELL-$SHELL} ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF ++## --------------------- ## ++## M4sh Initialization. ## ++## --------------------- ## ++ ++# Be more Bourne compatible ++DUALCASE=1; export DUALCASE # for MKS sh ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++ ++ ++# PATH needs CR ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits ++ ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ echo "#! /bin/sh" >conf$$.sh ++ echo "exit 0" >>conf$$.sh ++ chmod +x conf$$.sh ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then ++ PATH_SEPARATOR=';' ++ else ++ PATH_SEPARATOR=: ++ fi ++ rm -f conf$$.sh ++fi ++ ++# Support unset when possible. ++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then ++ as_unset=unset ++else ++ as_unset=false ++fi ++ ++ ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++as_nl=' ++' ++IFS=" "" $as_nl" ++ ++# Find who we are. Look in the path if we contain no directory separator. ++case $0 in ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 ++fi ++if test ! -f "$as_myself"; then ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ { (exit 1); exit 1; } ++fi ++ ++# Work around bugs in pre-3.0 UWIN ksh. ++for as_var in ENV MAIL MAILPATH ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++done ++PS1='$ ' ++PS2='> ' ++PS4='+ ' ++ ++# NLS nuisances. ++for as_var in \ ++ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ ++ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ ++ LC_TELEPHONE LC_TIME ++do ++ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then ++ eval $as_var=C; export $as_var ++ else ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++ fi ++done ++ ++# Required to use basename. ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then ++ as_expr=expr ++else ++ as_expr=false ++fi ++ ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then ++ as_basename=basename ++else ++ as_basename=false ++fi ++ ++ ++# Name of the executable. ++as_me=`$as_basename -- "$0" || ++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ ++ X"$0" : 'X\(//\)$' \| \ ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || ++echo X/"$0" | ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ ++# CDPATH. ++$as_unset CDPATH ++ ++ ++ ++ as_lineno_1=$LINENO ++ as_lineno_2=$LINENO ++ test "x$as_lineno_1" != "x$as_lineno_2" && ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { ++ ++ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO ++ # uniformly replaced by the line number. The first 'sed' inserts a ++ # line-number line after each line using $LINENO; the second 'sed' ++ # does the real work. The second script uses 'N' to pair each ++ # line-number line with the line containing $LINENO, and appends ++ # trailing '-' during substitution so that $LINENO is not a special ++ # case at line end. ++ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the ++ # scripts with optimization help from Paolo Bonzini. Blame Lee ++ # E. McMahon (1931-1989) for sed's syntax. :-) ++ sed -n ' ++ p ++ /[$]LINENO/= ++ ' <$as_myself | ++ sed ' ++ s/[$]LINENO.*/&-/ ++ t lineno ++ b ++ :lineno ++ N ++ :loop ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ ++ t loop ++ s/-\n.*// ++ ' >$as_me.lineno && ++ chmod +x "$as_me.lineno" || ++ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 ++ { (exit 1); exit 1; }; } ++ ++ # Don't try to exec as it changes $[0], causing all sort of problems ++ # (the dirname of $[0] is not the place where we might find the ++ # original and so on. Autoconf is especially sensitive to this). ++ . "./$as_me.lineno" ++ # Exit status is that of the last command. ++ exit ++} ++ ++ ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false ++fi ++ ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in ++-n*) ++ case `echo 'x\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ *) ECHO_C='\c';; ++ esac;; ++*) ++ ECHO_N='-n';; ++esac ++ ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then ++ as_expr=expr ++else ++ as_expr=false ++fi ++ ++rm -f conf$$ conf$$.exe conf$$.file ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file ++else ++ rm -f conf$$.dir ++ mkdir conf$$.dir ++fi ++echo >conf$$.file ++if ln -s conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || ++ as_ln_s='cp -p' ++elif ln conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s=ln ++else ++ as_ln_s='cp -p' ++fi ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null ++ ++if mkdir -p . 2>/dev/null; then ++ as_mkdir_p=: ++else ++ test -d ./-p && rmdir ./-p ++ as_mkdir_p=false ++fi ++ ++if test -x / >/dev/null 2>&1; then ++ as_test_x='test -x' ++else ++ if ls -dL / >/dev/null 2>&1; then ++ as_ls_L_option=L ++ else ++ as_ls_L_option= ++ fi ++ as_test_x=' ++ eval sh -c '\'' ++ if test -d "$1"; then ++ test -d "$1/."; ++ else ++ case $1 in ++ -*)set "./$1";; ++ esac; ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ++ ???[sx]*):;;*)false;;esac;fi ++ '\'' sh ++ ' ++fi ++as_executable_p=$as_test_x ++ ++# Sed expression to map a string onto a valid CPP name. ++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" ++ ++# Sed expression to map a string onto a valid variable name. ++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" ++ ++ ++exec 6>&1 ++ ++# Save the log message, to keep $[0] and so on meaningful, and to ++# report actual input values of CONFIG_FILES etc. instead of their ++# values after options handling. ++ac_log=" ++This file was extended by gnome-power-manager $as_me 2.24.0, which was ++generated by GNU Autoconf 2.61. Invocation command line was ++ ++ CONFIG_FILES = $CONFIG_FILES ++ CONFIG_HEADERS = $CONFIG_HEADERS ++ CONFIG_LINKS = $CONFIG_LINKS ++ CONFIG_COMMANDS = $CONFIG_COMMANDS ++ $ $0 $@ ++ ++on `(hostname || uname -n) 2>/dev/null | sed 1q` ++" ++ ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<_ACEOF ++# Files that config.status was made for. ++config_files="$ac_config_files" ++config_headers="$ac_config_headers" ++config_commands="$ac_config_commands" ++ ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF ++ac_cs_usage="\ ++\`$as_me' instantiates files from templates according to the ++current configuration. ++ ++Usage: $0 [OPTIONS] [FILE]... ++ ++ -h, --help print this help, then exit ++ -V, --version print version number and configuration settings, then exit ++ -q, --quiet do not print progress messages ++ -d, --debug don't remove temporary files ++ --recheck update $as_me by reconfiguring in the same conditions ++ --file=FILE[:TEMPLATE] ++ instantiate the configuration file FILE ++ --header=FILE[:TEMPLATE] ++ instantiate the configuration header FILE ++ ++Configuration files: ++$config_files ++ ++Configuration headers: ++$config_headers ++ ++Configuration commands: ++$config_commands ++ ++Report bugs to ." ++ ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF ++ac_cs_version="\\ ++gnome-power-manager config.status 2.24.0 ++configured by $0, generated by GNU Autoconf 2.61, ++ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" ++ ++Copyright (C) 2006 Free Software Foundation, Inc. ++This config.status script is free software; the Free Software Foundation ++gives unlimited permission to copy, distribute and modify it." ++ ++ac_pwd='$ac_pwd' ++srcdir='$srcdir' ++INSTALL='$INSTALL' ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF ++# If no file are specified by the user, then we need to provide default ++# value. By we need to know if files were specified by the user. ++ac_need_defaults=: ++while test $# != 0 ++do ++ case $1 in ++ --*=*) ++ ac_option=`expr "X$1" : 'X\([^=]*\)='` ++ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ++ ac_shift=: ++ ;; ++ *) ++ ac_option=$1 ++ ac_optarg=$2 ++ ac_shift=shift ++ ;; ++ esac ++ ++ case $ac_option in ++ # Handling of the options. ++ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ++ ac_cs_recheck=: ;; ++ --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) ++ echo "$ac_cs_version"; exit ;; ++ --debug | --debu | --deb | --de | --d | -d ) ++ debug=: ;; ++ --file | --fil | --fi | --f ) ++ $ac_shift ++ CONFIG_FILES="$CONFIG_FILES $ac_optarg" ++ ac_need_defaults=false;; ++ --header | --heade | --head | --hea ) ++ $ac_shift ++ CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" ++ ac_need_defaults=false;; ++ --he | --h) ++ # Conflict between --help and --header ++ { echo "$as_me: error: ambiguous option: $1 ++Try \`$0 --help' for more information." >&2 ++ { (exit 1); exit 1; }; };; ++ --help | --hel | -h ) ++ echo "$ac_cs_usage"; exit ;; ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ++ | -silent | --silent | --silen | --sile | --sil | --si | --s) ++ ac_cs_silent=: ;; ++ ++ # This is an error. ++ -*) { echo "$as_me: error: unrecognized option: $1 ++Try \`$0 --help' for more information." >&2 ++ { (exit 1); exit 1; }; } ;; ++ ++ *) ac_config_targets="$ac_config_targets $1" ++ ac_need_defaults=false ;; ++ ++ esac ++ shift ++done ++ ++ac_configure_extra_args= ++ ++if $ac_cs_silent; then ++ exec 6>/dev/null ++ ac_configure_extra_args="$ac_configure_extra_args --silent" ++fi ++ ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF ++if \$ac_cs_recheck; then ++ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 ++ CONFIG_SHELL=$SHELL ++ export CONFIG_SHELL ++ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion ++fi ++ ++_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF ++exec 5>>config.log ++{ ++ echo ++ sed 'h;s/./-/g;s/^.../@%:@@%:@ /;s/...$/ @%:@@%:@/;p;x;p;x' <<_ASBOX ++@%:@@%:@ Running $as_me. @%:@@%:@ ++_ASBOX ++ echo "$ac_log" ++} >&5 ++ ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF ++# ++# INIT-COMMANDS ++# ++AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" ++ ++ ++# The HP-UX ksh and POSIX shell print the target directory to stdout ++# if CDPATH is set. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++ ++sed_quote_subst='$sed_quote_subst' ++double_quote_subst='$double_quote_subst' ++delay_variable_subst='$delay_variable_subst' ++macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`' ++macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`' ++enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`' ++enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`' ++pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`' ++enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`' ++host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`' ++host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`' ++host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`' ++build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`' ++build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`' ++build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`' ++SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`' ++Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`' ++GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`' ++EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`' ++FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`' ++LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`' ++NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`' ++LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`' ++max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`' ++ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`' ++exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`' ++lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`' ++lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`' ++lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`' ++reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`' ++reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`' ++file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`' ++AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`' ++AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`' ++STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`' ++RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`' ++old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`' ++CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`' ++compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`' ++GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' ++objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`' ++SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`' ++ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`' ++MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`' ++lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`' ++lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`' ++lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`' ++lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`' ++need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`' ++DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`' ++NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`' ++LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`' ++OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`' ++OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`' ++libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`' ++shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`' ++enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`' ++export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' ++whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' ++compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`' ++old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`' ++allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' ++no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`' ++inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`' ++link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`' ++fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`' ++always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`' ++export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`' ++include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`' ++prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`' ++variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`' ++need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' ++need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`' ++version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`' ++runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`' ++shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' ++shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`' ++libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`' ++library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`' ++soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`' ++postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`' ++sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`' ++sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`' ++enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`' ++enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`' ++enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`' ++old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`' ++striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`' ++ ++LTCC='$LTCC' ++LTCFLAGS='$LTCFLAGS' ++compiler='$compiler_DEFAULT' ++ ++# Quote evaled strings. ++for var in SED \ ++GREP \ ++EGREP \ ++FGREP \ ++LD \ ++NM \ ++LN_S \ ++lt_SP2NL \ ++lt_NL2SP \ ++reload_flag \ ++deplibs_check_method \ ++file_magic_cmd \ ++AR \ ++AR_FLAGS \ ++STRIP \ ++RANLIB \ ++CC \ ++CFLAGS \ ++compiler \ ++lt_cv_sys_global_symbol_pipe \ ++lt_cv_sys_global_symbol_to_cdecl \ ++lt_cv_sys_global_symbol_to_c_name_address \ ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ ++SHELL \ ++ECHO \ ++lt_prog_compiler_no_builtin_flag \ ++lt_prog_compiler_wl \ ++lt_prog_compiler_pic \ ++lt_prog_compiler_static \ ++lt_cv_prog_compiler_c_o \ ++need_locks \ ++DSYMUTIL \ ++NMEDIT \ ++LIPO \ ++OTOOL \ ++OTOOL64 \ ++shrext_cmds \ ++export_dynamic_flag_spec \ ++whole_archive_flag_spec \ ++compiler_needs_object \ ++with_gnu_ld \ ++allow_undefined_flag \ ++no_undefined_flag \ ++hardcode_libdir_flag_spec \ ++hardcode_libdir_flag_spec_ld \ ++hardcode_libdir_separator \ ++fix_srcfile_path \ ++exclude_expsyms \ ++include_expsyms \ ++file_list_spec \ ++variables_saved_for_relink \ ++libname_spec \ ++library_names_spec \ ++soname_spec \ ++finish_eval \ ++old_striplib \ ++striplib; do ++ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in ++ *[\\\\\\\`\\"\\\$]*) ++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ++ ;; ++ *) ++ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ++ ;; ++ esac ++done ++ ++# Double-quote double-evaled strings. ++for var in reload_cmds \ ++old_postinstall_cmds \ ++old_postuninstall_cmds \ ++old_archive_cmds \ ++extract_expsyms_cmds \ ++old_archive_from_new_cmds \ ++old_archive_from_expsyms_cmds \ ++archive_cmds \ ++archive_expsym_cmds \ ++module_cmds \ ++module_expsym_cmds \ ++export_symbols_cmds \ ++prelink_cmds \ ++postinstall_cmds \ ++postuninstall_cmds \ ++finish_cmds \ ++sys_lib_search_path_spec \ ++sys_lib_dlsearch_path_spec; do ++ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in ++ *[\\\\\\\`\\"\\\$]*) ++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ++ ;; ++ *) ++ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ++ ;; ++ esac ++done ++ ++# Fix-up fallback echo if it was mangled by the above quoting rules. ++case \$lt_ECHO in ++*'\\\$0 --fallback-echo"') lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\` ++ ;; ++esac ++ ++ac_aux_dir='$ac_aux_dir' ++xsi_shell='$xsi_shell' ++lt_shell_append='$lt_shell_append' ++ ++# See if we are running on zsh, and set the options which allow our ++# commands through without removal of \ escapes INIT. ++if test -n "\${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++fi ++ ++ ++ PACKAGE='$PACKAGE' ++ VERSION='$VERSION' ++ TIMESTAMP='$TIMESTAMP' ++ RM='$RM' ++ ofile='$ofile' ++ ++ ++ ++INTLTOOL_PERL='${INTLTOOL_PERL}' ac_aux_dir='${ac_aux_dir}' ++prefix="$prefix" exec_prefix="$exec_prefix" INTLTOOL_LIBDIR="$libdir" ++INTLTOOL_EXTRACT='${INTLTOOL_EXTRACT}' ++ ++ ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF ++ ++# Handling of arguments. ++for ac_config_target in $ac_config_targets ++do ++ case $ac_config_target in ++ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; ++ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; ++ "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; ++ "intltool") CONFIG_COMMANDS="$CONFIG_COMMANDS intltool" ;; ++ "default-1") CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;; ++ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; ++ "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; ++ "src/dbus/Makefile") CONFIG_FILES="$CONFIG_FILES src/dbus/Makefile" ;; ++ "applets/Makefile") CONFIG_FILES="$CONFIG_FILES applets/Makefile" ;; ++ "applets/brightness/Makefile") CONFIG_FILES="$CONFIG_FILES applets/brightness/Makefile" ;; ++ "applets/inhibit/Makefile") CONFIG_FILES="$CONFIG_FILES applets/inhibit/Makefile" ;; ++ "libhal-glib/Makefile") CONFIG_FILES="$CONFIG_FILES libhal-glib/Makefile" ;; ++ "libdbus-glib/Makefile") CONFIG_FILES="$CONFIG_FILES libdbus-glib/Makefile" ;; ++ "libidletime/Makefile") CONFIG_FILES="$CONFIG_FILES libidletime/Makefile" ;; ++ "libunique/Makefile") CONFIG_FILES="$CONFIG_FILES libunique/Makefile" ;; ++ "docs/Makefile") CONFIG_FILES="$CONFIG_FILES docs/Makefile" ;; ++ "man/Makefile") CONFIG_FILES="$CONFIG_FILES man/Makefile" ;; ++ "help/Makefile") CONFIG_FILES="$CONFIG_FILES help/Makefile" ;; ++ "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; ++ "tools/Makefile") CONFIG_FILES="$CONFIG_FILES tools/Makefile" ;; ++ "test/Makefile") CONFIG_FILES="$CONFIG_FILES test/Makefile" ;; ++ "data/Makefile") CONFIG_FILES="$CONFIG_FILES data/Makefile" ;; ++ "data/gnome-power-manager.desktop.in") CONFIG_FILES="$CONFIG_FILES data/gnome-power-manager.desktop.in" ;; ++ "data/gnome-power-preferences.desktop.in") CONFIG_FILES="$CONFIG_FILES data/gnome-power-preferences.desktop.in" ;; ++ "data/gnome-power-statistics.desktop.in") CONFIG_FILES="$CONFIG_FILES data/gnome-power-statistics.desktop.in" ;; ++ "data/sounds/Makefile") CONFIG_FILES="$CONFIG_FILES data/sounds/Makefile" ;; ++ "data/icons/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/Makefile" ;; ++ "data/icons/16x16/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/16x16/Makefile" ;; ++ "data/icons/16x16/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/16x16/actions/Makefile" ;; ++ "data/icons/16x16/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/16x16/apps/Makefile" ;; ++ "data/icons/16x16/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/16x16/status/Makefile" ;; ++ "data/icons/22x22/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/22x22/Makefile" ;; ++ "data/icons/22x22/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/22x22/actions/Makefile" ;; ++ "data/icons/22x22/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/22x22/apps/Makefile" ;; ++ "data/icons/22x22/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/22x22/status/Makefile" ;; ++ "data/icons/24x24/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/24x24/Makefile" ;; ++ "data/icons/24x24/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/24x24/actions/Makefile" ;; ++ "data/icons/24x24/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/24x24/apps/Makefile" ;; ++ "data/icons/24x24/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/24x24/status/Makefile" ;; ++ "data/icons/48x48/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/48x48/Makefile" ;; ++ "data/icons/48x48/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/48x48/actions/Makefile" ;; ++ "data/icons/48x48/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/48x48/apps/Makefile" ;; ++ "data/icons/48x48/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/48x48/status/Makefile" ;; ++ "data/icons/scalable/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/scalable/Makefile" ;; ++ "data/icons/scalable/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/scalable/actions/Makefile" ;; ++ "data/icons/scalable/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/scalable/apps/Makefile" ;; ++ "data/icons/scalable/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/scalable/status/Makefile" ;; ++ "po/stamp-it") CONFIG_COMMANDS="$CONFIG_COMMANDS po/stamp-it" ;; ++ ++ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 ++echo "$as_me: error: invalid argument: $ac_config_target" >&2;} ++ { (exit 1); exit 1; }; };; ++ esac ++done ++ ++ ++# If the user did not use the arguments to specify the items to instantiate, ++# then the envvar interface is used. Set only those that are not. ++# We use the long form for the default assignment because of an extremely ++# bizarre bug on SunOS 4.1.3. ++if $ac_need_defaults; then ++ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files ++ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers ++ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands ++fi ++ ++# Have a temporary directory for convenience. Make it in the build tree ++# simply because there is no reason against having it here, and in addition, ++# creating and moving files from /tmp can sometimes cause problems. ++# Hook for its removal unless debugging. ++# Note that there is a small window in which the directory will not be cleaned: ++# after its creation but before its name has been assigned to `$tmp'. ++$debug || ++{ ++ tmp= ++ trap 'exit_status=$? ++ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ++' 0 ++ trap '{ (exit 1); exit 1; }' 1 2 13 15 ++} ++# Create a (secure) tmp directory for tmp files. ++ ++{ ++ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && ++ test -n "$tmp" && test -d "$tmp" ++} || ++{ ++ tmp=./conf$$-$RANDOM ++ (umask 077 && mkdir "$tmp") ++} || ++{ ++ echo "$me: cannot create a temporary directory in ." >&2 ++ { (exit 1); exit 1; } ++} ++ ++# ++# Set up the sed scripts for CONFIG_FILES section. ++# ++ ++# No need to generate the scripts if there are no CONFIG_FILES. ++# This happens for instance when ./config.status config.h ++if test -n "$CONFIG_FILES"; then ++ ++_ACEOF ++ ++ ++ ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ cat >conf$$subs.sed <<_ACEOF ++SHELL!$SHELL$ac_delim ++PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim ++PACKAGE_NAME!$PACKAGE_NAME$ac_delim ++PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim ++PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim ++PACKAGE_STRING!$PACKAGE_STRING$ac_delim ++PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim ++exec_prefix!$exec_prefix$ac_delim ++prefix!$prefix$ac_delim ++program_transform_name!$program_transform_name$ac_delim ++bindir!$bindir$ac_delim ++sbindir!$sbindir$ac_delim ++libexecdir!$libexecdir$ac_delim ++datarootdir!$datarootdir$ac_delim ++datadir!$datadir$ac_delim ++sysconfdir!$sysconfdir$ac_delim ++sharedstatedir!$sharedstatedir$ac_delim ++localstatedir!$localstatedir$ac_delim ++includedir!$includedir$ac_delim ++oldincludedir!$oldincludedir$ac_delim ++docdir!$docdir$ac_delim ++infodir!$infodir$ac_delim ++htmldir!$htmldir$ac_delim ++dvidir!$dvidir$ac_delim ++pdfdir!$pdfdir$ac_delim ++psdir!$psdir$ac_delim ++libdir!$libdir$ac_delim ++localedir!$localedir$ac_delim ++mandir!$mandir$ac_delim ++DEFS!$DEFS$ac_delim ++ECHO_C!$ECHO_C$ac_delim ++ECHO_N!$ECHO_N$ac_delim ++ECHO_T!$ECHO_T$ac_delim ++LIBS!$LIBS$ac_delim ++build_alias!$build_alias$ac_delim ++host_alias!$host_alias$ac_delim ++target_alias!$target_alias$ac_delim ++INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim ++INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim ++INSTALL_DATA!$INSTALL_DATA$ac_delim ++CYGPATH_W!$CYGPATH_W$ac_delim ++PACKAGE!$PACKAGE$ac_delim ++VERSION!$VERSION$ac_delim ++ACLOCAL!$ACLOCAL$ac_delim ++AUTOCONF!$AUTOCONF$ac_delim ++AUTOMAKE!$AUTOMAKE$ac_delim ++AUTOHEADER!$AUTOHEADER$ac_delim ++MAKEINFO!$MAKEINFO$ac_delim ++install_sh!$install_sh$ac_delim ++STRIP!$STRIP$ac_delim ++INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim ++mkdir_p!$mkdir_p$ac_delim ++AWK!$AWK$ac_delim ++SET_MAKE!$SET_MAKE$ac_delim ++am__leading_dot!$am__leading_dot$ac_delim ++AMTAR!$AMTAR$ac_delim ++am__tar!$am__tar$ac_delim ++am__untar!$am__untar$ac_delim ++CC!$CC$ac_delim ++CFLAGS!$CFLAGS$ac_delim ++LDFLAGS!$LDFLAGS$ac_delim ++CPPFLAGS!$CPPFLAGS$ac_delim ++ac_ct_CC!$ac_ct_CC$ac_delim ++EXEEXT!$EXEEXT$ac_delim ++OBJEXT!$OBJEXT$ac_delim ++DEPDIR!$DEPDIR$ac_delim ++am__include!$am__include$ac_delim ++am__quote!$am__quote$ac_delim ++AMDEP_TRUE!$AMDEP_TRUE$ac_delim ++AMDEP_FALSE!$AMDEP_FALSE$ac_delim ++AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim ++CCDEPMODE!$CCDEPMODE$ac_delim ++am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim ++am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim ++LIBTOOL!$LIBTOOL$ac_delim ++build!$build$ac_delim ++build_cpu!$build_cpu$ac_delim ++build_vendor!$build_vendor$ac_delim ++build_os!$build_os$ac_delim ++host!$host$ac_delim ++host_cpu!$host_cpu$ac_delim ++host_vendor!$host_vendor$ac_delim ++host_os!$host_os$ac_delim ++SED!$SED$ac_delim ++GREP!$GREP$ac_delim ++EGREP!$EGREP$ac_delim ++FGREP!$FGREP$ac_delim ++LD!$LD$ac_delim ++DUMPBIN!$DUMPBIN$ac_delim ++ac_ct_DUMPBIN!$ac_ct_DUMPBIN$ac_delim ++NM!$NM$ac_delim ++LN_S!$LN_S$ac_delim ++AR!$AR$ac_delim ++RANLIB!$RANLIB$ac_delim ++lt_ECHO!$lt_ECHO$ac_delim ++DSYMUTIL!$DSYMUTIL$ac_delim ++NMEDIT!$NMEDIT$ac_delim ++_ACEOF ++ ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then ++ break ++ elif $ac_last_try; then ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " ++ fi ++done ++ ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` ++if test -n "$ac_eof"; then ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ++ ac_eof=`expr $ac_eof + 1` ++fi ++ ++cat >>$CONFIG_STATUS <<_ACEOF ++cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b ++_ACEOF ++sed ' ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g ++s/^/s,@/; s/!/@,|#_!!_#|/ ++:n ++t n ++s/'"$ac_delim"'$/,g/; t ++s/$/\\/; p ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ++' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF ++CEOF$ac_eof ++_ACEOF ++ ++ ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ cat >conf$$subs.sed <<_ACEOF ++LIPO!$LIPO$ac_delim ++OTOOL!$OTOOL$ac_delim ++OTOOL64!$OTOOL64$ac_delim ++CPP!$CPP$ac_delim ++INTLTOOL_DESKTOP_RULE!$INTLTOOL_DESKTOP_RULE$ac_delim ++INTLTOOL_DIRECTORY_RULE!$INTLTOOL_DIRECTORY_RULE$ac_delim ++INTLTOOL_KEYS_RULE!$INTLTOOL_KEYS_RULE$ac_delim ++INTLTOOL_PROP_RULE!$INTLTOOL_PROP_RULE$ac_delim ++INTLTOOL_OAF_RULE!$INTLTOOL_OAF_RULE$ac_delim ++INTLTOOL_PONG_RULE!$INTLTOOL_PONG_RULE$ac_delim ++INTLTOOL_SERVER_RULE!$INTLTOOL_SERVER_RULE$ac_delim ++INTLTOOL_SHEET_RULE!$INTLTOOL_SHEET_RULE$ac_delim ++INTLTOOL_SOUNDLIST_RULE!$INTLTOOL_SOUNDLIST_RULE$ac_delim ++INTLTOOL_UI_RULE!$INTLTOOL_UI_RULE$ac_delim ++INTLTOOL_XAM_RULE!$INTLTOOL_XAM_RULE$ac_delim ++INTLTOOL_KBD_RULE!$INTLTOOL_KBD_RULE$ac_delim ++INTLTOOL_XML_RULE!$INTLTOOL_XML_RULE$ac_delim ++INTLTOOL_XML_NOMERGE_RULE!$INTLTOOL_XML_NOMERGE_RULE$ac_delim ++INTLTOOL_CAVES_RULE!$INTLTOOL_CAVES_RULE$ac_delim ++INTLTOOL_SCHEMAS_RULE!$INTLTOOL_SCHEMAS_RULE$ac_delim ++INTLTOOL_THEME_RULE!$INTLTOOL_THEME_RULE$ac_delim ++INTLTOOL_SERVICE_RULE!$INTLTOOL_SERVICE_RULE$ac_delim ++INTLTOOL_POLICY_RULE!$INTLTOOL_POLICY_RULE$ac_delim ++XGETTEXT!$XGETTEXT$ac_delim ++MSGMERGE!$MSGMERGE$ac_delim ++MSGFMT!$MSGFMT$ac_delim ++INTLTOOL_EXTRACT!$INTLTOOL_EXTRACT$ac_delim ++INTLTOOL_MERGE!$INTLTOOL_MERGE$ac_delim ++INTLTOOL_UPDATE!$INTLTOOL_UPDATE$ac_delim ++INTLTOOL_PERL!$INTLTOOL_PERL$ac_delim ++ALL_LINGUAS!$ALL_LINGUAS$ac_delim ++DATADIRNAME!$DATADIRNAME$ac_delim ++WARN_CFLAGS!$WARN_CFLAGS$ac_delim ++PKG_CONFIG!$PKG_CONFIG$ac_delim ++HELP_DIR!$HELP_DIR$ac_delim ++OMF_DIR!$OMF_DIR$ac_delim ++DOC_USER_FORMATS!$DOC_USER_FORMATS$ac_delim ++ENABLE_SK_TRUE!$ENABLE_SK_TRUE$ac_delim ++ENABLE_SK_FALSE!$ENABLE_SK_FALSE$ac_delim ++DISTCHECK_CONFIGURE_FLAGS!$DISTCHECK_CONFIGURE_FLAGS$ac_delim ++HAVE_GNOME_DOC_UTILS_TRUE!$HAVE_GNOME_DOC_UTILS_TRUE$ac_delim ++HAVE_GNOME_DOC_UTILS_FALSE!$HAVE_GNOME_DOC_UTILS_FALSE$ac_delim ++GLIB_GENMARSHAL!$GLIB_GENMARSHAL$ac_delim ++GETTEXT_PACKAGE!$GETTEXT_PACKAGE$ac_delim ++USE_NLS!$USE_NLS$ac_delim ++MSGFMT_OPTS!$MSGFMT_OPTS$ac_delim ++GMSGFMT!$GMSGFMT$ac_delim ++CATALOGS!$CATALOGS$ac_delim ++CATOBJEXT!$CATOBJEXT$ac_delim ++GMOFILES!$GMOFILES$ac_delim ++INSTOBJEXT!$INSTOBJEXT$ac_delim ++INTLLIBS!$INTLLIBS$ac_delim ++PO_IN_DATADIR_TRUE!$PO_IN_DATADIR_TRUE$ac_delim ++PO_IN_DATADIR_FALSE!$PO_IN_DATADIR_FALSE$ac_delim ++POFILES!$POFILES$ac_delim ++POSUB!$POSUB$ac_delim ++MKINSTALLDIRS!$MKINSTALLDIRS$ac_delim ++GLIB_REQUIRED!$GLIB_REQUIRED$ac_delim ++GTK_REQUIRED!$GTK_REQUIRED$ac_delim ++GDK_REQUIRED!$GDK_REQUIRED$ac_delim ++LIBGNOME_REQUIRED!$LIBGNOME_REQUIRED$ac_delim ++LIBGNOMEUI_REQUIRED!$LIBGNOMEUI_REQUIRED$ac_delim ++HAL_REQUIRED!$HAL_REQUIRED$ac_delim ++DBUS_REQUIRED!$DBUS_REQUIRED$ac_delim ++LIBGLADE_REQUIRED!$LIBGLADE_REQUIRED$ac_delim ++LIBNOTIFY_REQUIRED!$LIBNOTIFY_REQUIRED$ac_delim ++LIBWNCK_REQUIRED!$LIBWNCK_REQUIRED$ac_delim ++CAIRO_REQUIRED!$CAIRO_REQUIRED$ac_delim ++UNIQUE_REQUIRED!$UNIQUE_REQUIRED$ac_delim ++LIBPANEL_REQUIRED!$LIBPANEL_REQUIRED$ac_delim ++GSTREAMER_REQUIRED!$GSTREAMER_REQUIRED$ac_delim ++XRANDR_REQUIRED!$XRANDR_REQUIRED$ac_delim ++POLKIT_GNOME_REQUIRED!$POLKIT_GNOME_REQUIRED$ac_delim ++GLIB_CFLAGS!$GLIB_CFLAGS$ac_delim ++GLIB_LIBS!$GLIB_LIBS$ac_delim ++HAL_CFLAGS!$HAL_CFLAGS$ac_delim ++HAL_LIBS!$HAL_LIBS$ac_delim ++GSTREAMER_CFLAGS!$GSTREAMER_CFLAGS$ac_delim ++GSTREAMER_LIBS!$GSTREAMER_LIBS$ac_delim ++DBUS_CFLAGS!$DBUS_CFLAGS$ac_delim ++DBUS_LIBS!$DBUS_LIBS$ac_delim ++GNOME_CFLAGS!$GNOME_CFLAGS$ac_delim ++GNOME_LIBS!$GNOME_LIBS$ac_delim ++GDK_CFLAGS!$GDK_CFLAGS$ac_delim ++GDK_LIBS!$GDK_LIBS$ac_delim ++XRANDR_CFLAGS!$XRANDR_CFLAGS$ac_delim ++XRANDR_LIBS!$XRANDR_LIBS$ac_delim ++GCONFTOOL!$GCONFTOOL$ac_delim ++GCONF_SCHEMA_CONFIG_SOURCE!$GCONF_SCHEMA_CONFIG_SOURCE$ac_delim ++GCONF_SCHEMA_FILE_DIR!$GCONF_SCHEMA_FILE_DIR$ac_delim ++GCONF_SCHEMAS_INSTALL_TRUE!$GCONF_SCHEMAS_INSTALL_TRUE$ac_delim ++GCONF_SCHEMAS_INSTALL_FALSE!$GCONF_SCHEMAS_INSTALL_FALSE$ac_delim ++XMKMF!$XMKMF$ac_delim ++X_CFLAGS!$X_CFLAGS$ac_delim ++X_PRE_LIBS!$X_PRE_LIBS$ac_delim ++X_LIBS!$X_LIBS$ac_delim ++X_EXTRA_LIBS!$X_EXTRA_LIBS$ac_delim ++_ACEOF ++ ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then ++ break ++ elif $ac_last_try; then ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " ++ fi ++done ++ ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` ++if test -n "$ac_eof"; then ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ++ ac_eof=`expr $ac_eof + 1` ++fi ++ ++cat >>$CONFIG_STATUS <<_ACEOF ++cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b ++_ACEOF ++sed ' ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g ++s/^/s,@/; s/!/@,|#_!!_#|/ ++:n ++t n ++s/'"$ac_delim"'$/,g/; t ++s/$/\\/; p ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ++' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF ++CEOF$ac_eof ++_ACEOF ++ ++ ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ cat >conf$$subs.sed <<_ACEOF ++SYSCONFDIR!$SYSCONFDIR$ac_delim ++DATADIR!$DATADIR$ac_delim ++BINDIR!$BINDIR$ac_delim ++SBINDIR!$SBINDIR$ac_delim ++DOCDIR!$DOCDIR$ac_delim ++POLKIT_CFLAGS!$POLKIT_CFLAGS$ac_delim ++POLKIT_LIBS!$POLKIT_LIBS$ac_delim ++HAVE_TESTS_TRUE!$HAVE_TESTS_TRUE$ac_delim ++HAVE_TESTS_FALSE!$HAVE_TESTS_FALSE$ac_delim ++POLKIT_GNOME_CFLAGS!$POLKIT_GNOME_CFLAGS$ac_delim ++POLKIT_GNOME_LIBS!$POLKIT_GNOME_LIBS$ac_delim ++HAVE_GCONF_DEFAULTS_TRUE!$HAVE_GCONF_DEFAULTS_TRUE$ac_delim ++HAVE_GCONF_DEFAULTS_FALSE!$HAVE_GCONF_DEFAULTS_FALSE$ac_delim ++HAVE_APPLETS_TRUE!$HAVE_APPLETS_TRUE$ac_delim ++HAVE_APPLETS_FALSE!$HAVE_APPLETS_FALSE$ac_delim ++XMLTO!$XMLTO$ac_delim ++DOCBOOK_DOCS_ENABLED_TRUE!$DOCBOOK_DOCS_ENABLED_TRUE$ac_delim ++DOCBOOK_DOCS_ENABLED_FALSE!$DOCBOOK_DOCS_ENABLED_FALSE$ac_delim ++DBUS_SERVICES_DIR!$DBUS_SERVICES_DIR$ac_delim ++LIBNOTIFY_CFLAGS!$LIBNOTIFY_CFLAGS$ac_delim ++LIBNOTIFY_LIBS!$LIBNOTIFY_LIBS$ac_delim ++HAVE_LIBNOTIFY_TRUE!$HAVE_LIBNOTIFY_TRUE$ac_delim ++HAVE_LIBNOTIFY_FALSE!$HAVE_LIBNOTIFY_FALSE$ac_delim ++UNIQUE_CFLAGS!$UNIQUE_CFLAGS$ac_delim ++UNIQUE_LIBS!$UNIQUE_LIBS$ac_delim ++HAVE_UNIQUE_TRUE!$HAVE_UNIQUE_TRUE$ac_delim ++HAVE_UNIQUE_FALSE!$HAVE_UNIQUE_FALSE$ac_delim ++GPM_EXTRA_LIBS!$GPM_EXTRA_LIBS$ac_delim ++DOCBOOK2MAN!$DOCBOOK2MAN$ac_delim ++HAVE_DOCBOOK2MAN_TRUE!$HAVE_DOCBOOK2MAN_TRUE$ac_delim ++HAVE_DOCBOOK2MAN_FALSE!$HAVE_DOCBOOK2MAN_FALSE$ac_delim ++LIB@&t@OBJS!$LIB@&t@OBJS$ac_delim ++LTLIBOBJS!$LTLIBOBJS$ac_delim ++_ACEOF ++ ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 33; then ++ break ++ elif $ac_last_try; then ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " ++ fi ++done ++ ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` ++if test -n "$ac_eof"; then ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ++ ac_eof=`expr $ac_eof + 1` ++fi ++ ++cat >>$CONFIG_STATUS <<_ACEOF ++cat >"\$tmp/subs-3.sed" <<\CEOF$ac_eof ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end ++_ACEOF ++sed ' ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g ++s/^/s,@/; s/!/@,|#_!!_#|/ ++:n ++t n ++s/'"$ac_delim"'$/,g/; t ++s/$/\\/; p ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ++' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF ++:end ++s/|#_!!_#|//g ++CEOF$ac_eof ++_ACEOF ++ ++ ++# VPATH may cause trouble with some makes, so we remove $(srcdir), ++# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and ++# trailing colons and then remove the whole line if VPATH becomes empty ++# (actually we leave an empty line to preserve line numbers). ++if test "x$srcdir" = x.; then ++ ac_vpsub='/^[ ]*VPATH[ ]*=/{ ++s/:*\$(srcdir):*/:/ ++s/:*\${srcdir}:*/:/ ++s/:*@srcdir@:*/:/ ++s/^\([^=]*=[ ]*\):*/\1/ ++s/:*$// ++s/^[^=]*=[ ]*$// ++}' ++fi ++ ++cat >>$CONFIG_STATUS <<\_ACEOF ++fi # test -n "$CONFIG_FILES" ++ ++ ++for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS ++do ++ case $ac_tag in ++ :[FHLC]) ac_mode=$ac_tag; continue;; ++ esac ++ case $ac_mode$ac_tag in ++ :[FHL]*:*);; ++ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 ++echo "$as_me: error: Invalid tag $ac_tag." >&2;} ++ { (exit 1); exit 1; }; };; ++ :[FH]-) ac_tag=-:-;; ++ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; ++ esac ++ ac_save_IFS=$IFS ++ IFS=: ++ set x $ac_tag ++ IFS=$ac_save_IFS ++ shift ++ ac_file=$1 ++ shift ++ ++ case $ac_mode in ++ :L) ac_source=$1;; ++ :[FH]) ++ ac_file_inputs= ++ for ac_f ++ do ++ case $ac_f in ++ -) ac_f="$tmp/stdin";; ++ *) # Look for the file first in the build tree, then in the source tree ++ # (if the path is not absolute). The absolute path cannot be DOS-style, ++ # because $ac_f cannot contain `:'. ++ test -f "$ac_f" || ++ case $ac_f in ++ [\\/$]*) false;; ++ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; ++ esac || ++ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 ++echo "$as_me: error: cannot find input file: $ac_f" >&2;} ++ { (exit 1); exit 1; }; };; ++ esac ++ ac_file_inputs="$ac_file_inputs $ac_f" ++ done ++ ++ # Let's still pretend it is `configure' which instantiates (i.e., don't ++ # use $as_me), people would be surprised to read: ++ # /* config.h. Generated by config.status. */ ++ configure_input="Generated from "`IFS=: ++ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." ++ if test x"$ac_file" != x-; then ++ configure_input="$ac_file. $configure_input" ++ { echo "$as_me:$LINENO: creating $ac_file" >&5 ++echo "$as_me: creating $ac_file" >&6;} ++ fi ++ ++ case $ac_tag in ++ *:-:* | *:-) cat >"$tmp/stdin";; ++ esac ++ ;; ++ esac ++ ++ ac_dir=`$as_dirname -- "$ac_file" || ++$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$ac_file" : 'X\(//\)[^/]' \| \ ++ X"$ac_file" : 'X\(//\)$' \| \ ++ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$ac_file" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ { as_dir="$ac_dir" ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { ++ as_dirs= ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || ++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$as_dir" : 'X\(//\)[^/]' \| \ ++ X"$as_dir" : 'X\(//\)$' \| \ ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$as_dir" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break ++ done ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 ++echo "$as_me: error: cannot create directory $as_dir" >&2;} ++ { (exit 1); exit 1; }; }; } ++ ac_builddir=. ++ ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) ++ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; ++esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix ++ ++case $srcdir in ++ .) # We are building in place. ++ ac_srcdir=. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. ++ ac_srcdir=$srcdir$ac_dir_suffix; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; ++esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix ++ ++ ++ case $ac_mode in ++ :F) ++ # ++ # CONFIG_FILE ++ # ++ ++ case $INSTALL in ++ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; ++ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; ++ esac ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF ++# If the template does not know about datarootdir, expand it. ++# FIXME: This hack should be removed a few years after 2.60. ++ac_datarootdir_hack=; ac_datarootdir_seen= ++ ++case `sed -n '/datarootdir/ { ++ p ++ q ++} ++/@datadir@/p ++/@docdir@/p ++/@infodir@/p ++/@localedir@/p ++/@mandir@/p ++' $ac_file_inputs` in ++*datarootdir*) ac_datarootdir_seen=yes;; ++*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) ++ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 ++echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF ++ ac_datarootdir_hack=' ++ s&@datadir@&$datadir&g ++ s&@docdir@&$docdir&g ++ s&@infodir@&$infodir&g ++ s&@localedir@&$localedir&g ++ s&@mandir@&$mandir&g ++ s&\\\${datarootdir}&$datarootdir&g' ;; ++esac ++_ACEOF ++ ++# Neutralize VPATH when `$srcdir' = `.'. ++# Shell code in configure.ac might set extrasub. ++# FIXME: do we really want to maintain this feature? ++cat >>$CONFIG_STATUS <<_ACEOF ++ sed "$ac_vpsub ++$extrasub ++_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF ++:t ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b ++s&@configure_input@&$configure_input&;t t ++s&@top_builddir@&$ac_top_builddir_sub&;t t ++s&@srcdir@&$ac_srcdir&;t t ++s&@abs_srcdir@&$ac_abs_srcdir&;t t ++s&@top_srcdir@&$ac_top_srcdir&;t t ++s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t ++s&@builddir@&$ac_builddir&;t t ++s&@abs_builddir@&$ac_abs_builddir&;t t ++s&@abs_top_builddir@&$ac_abs_top_builddir&;t t ++s&@INSTALL@&$ac_INSTALL&;t t ++$ac_datarootdir_hack ++" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" | sed -f "$tmp/subs-3.sed" >$tmp/out ++ ++test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && ++ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && ++ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && ++ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined." >&5 ++echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined." >&2;} ++ ++ rm -f "$tmp/stdin" ++ case $ac_file in ++ -) cat "$tmp/out"; rm -f "$tmp/out";; ++ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; ++ esac ++ ;; ++ :H) ++ # ++ # CONFIG_HEADER ++ # ++_ACEOF ++ ++# Transform confdefs.h into a sed script `conftest.defines', that ++# substitutes the proper values into config.h.in to produce config.h. ++rm -f conftest.defines conftest.tail ++# First, append a space to every undef/define line, to ease matching. ++echo 's/$/ /' >conftest.defines ++# Then, protect against being on the right side of a sed subst, or in ++# an unquoted here document, in config.status. If some macros were ++# called several times there might be several #defines for the same ++# symbol, which is useless. But do not sort them, since the last ++# AC_DEFINE must be honored. ++ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* ++# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where ++# NAME is the cpp macro being defined, VALUE is the value it is being given. ++# PARAMS is the parameter list in the macro definition--in most cases, it's ++# just an empty string. ++ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*' ++ac_dB='\\)[ (].*,\\1define\\2' ++ac_dC=' ' ++ac_dD=' ,' ++ ++uniq confdefs.h | ++ sed -n ' ++ t rset ++ :rset ++ s/^[ ]*#[ ]*define[ ][ ]*// ++ t ok ++ d ++ :ok ++ s/[\\&,]/\\&/g ++ s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p ++ s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p ++ ' >>conftest.defines ++ ++# Remove the space that was appended to ease matching. ++# Then replace #undef with comments. This is necessary, for ++# example, in the case of _POSIX_SOURCE, which is predefined and required ++# on some systems where configure will not decide to define it. ++# (The regexp can be short, since the line contains either #define or #undef.) ++echo 's/ $// ++s,^[ #]*u.*,/* & */,' >>conftest.defines ++ ++# Break up conftest.defines: ++ac_max_sed_lines=50 ++ ++# First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1" ++# Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2" ++# Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1" ++# et cetera. ++ac_in='$ac_file_inputs' ++ac_out='"$tmp/out1"' ++ac_nxt='"$tmp/out2"' ++ ++while : ++do ++ # Write a here document: ++ cat >>$CONFIG_STATUS <<_ACEOF ++ # First, check the format of the line: ++ cat >"\$tmp/defines.sed" <<\\CEOF ++/^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def ++/^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def ++b ++:def ++_ACEOF ++ sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS ++ echo 'CEOF ++ sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS ++ ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in ++ sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail ++ grep . conftest.tail >/dev/null || break ++ rm -f conftest.defines ++ mv conftest.tail conftest.defines ++done ++rm -f conftest.defines conftest.tail ++ ++echo "ac_result=$ac_in" >>$CONFIG_STATUS ++cat >>$CONFIG_STATUS <<\_ACEOF ++ if test x"$ac_file" != x-; then ++ echo "/* $configure_input */" >"$tmp/config.h" ++ cat "$ac_result" >>"$tmp/config.h" ++ if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then ++ { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 ++echo "$as_me: $ac_file is unchanged" >&6;} ++ else ++ rm -f $ac_file ++ mv "$tmp/config.h" $ac_file ++ fi ++ else ++ echo "/* $configure_input */" ++ cat "$ac_result" ++ fi ++ rm -f "$tmp/out12" ++# Compute $ac_file's index in $config_headers. ++_am_stamp_count=1 ++for _am_header in $config_headers :; do ++ case $_am_header in ++ $ac_file | $ac_file:* ) ++ break ;; ++ * ) ++ _am_stamp_count=`expr $_am_stamp_count + 1` ;; ++ esac ++done ++echo "timestamp for $ac_file" >`$as_dirname -- $ac_file || ++$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X$ac_file : 'X\(//\)[^/]' \| \ ++ X$ac_file : 'X\(//\)$' \| \ ++ X$ac_file : 'X\(/\)' \| . 2>/dev/null || ++echo X$ac_file | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'`/stamp-h$_am_stamp_count ++ ;; ++ ++ :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5 ++echo "$as_me: executing $ac_file commands" >&6;} ++ ;; ++ esac ++ ++ ++ case $ac_file$ac_mode in ++ "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do ++ # Strip MF so we end up with the name of the file. ++ mf=`echo "$mf" | sed -e 's/:.*$//'` ++ # Check whether this is an Automake generated Makefile or not. ++ # We used to match only the files named `Makefile.in', but ++ # some people rename them; so instead we look at the file content. ++ # Grep'ing the first line is not enough: some people post-process ++ # each Makefile.in and add a new line on top of each file to say so. ++ # So let's grep whole file. ++ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then ++ dirpart=`$as_dirname -- "$mf" || ++$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$mf" : 'X\(//\)[^/]' \| \ ++ X"$mf" : 'X\(//\)$' \| \ ++ X"$mf" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$mf" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ else ++ continue ++ fi ++ # Extract the definition of DEPDIR, am__include, and am__quote ++ # from the Makefile without running `make'. ++ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` ++ test -z "$DEPDIR" && continue ++ am__include=`sed -n 's/^am__include = //p' < "$mf"` ++ test -z "am__include" && continue ++ am__quote=`sed -n 's/^am__quote = //p' < "$mf"` ++ # When using ansi2knr, U may be empty or an underscore; expand it ++ U=`sed -n 's/^U = //p' < "$mf"` ++ # Find all dependency output files, they are included files with ++ # $(DEPDIR) in their names. We invoke sed twice because it is the ++ # simplest approach to changing $(DEPDIR) to its actual value in the ++ # expansion. ++ for file in `sed -n " ++ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ ++ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do ++ # Make sure the directory exists. ++ test -f "$dirpart/$file" && continue ++ fdir=`$as_dirname -- "$file" || ++$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$file" : 'X\(//\)[^/]' \| \ ++ X"$file" : 'X\(//\)$' \| \ ++ X"$file" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$file" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ { as_dir=$dirpart/$fdir ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { ++ as_dirs= ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || ++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$as_dir" : 'X\(//\)[^/]' \| \ ++ X"$as_dir" : 'X\(//\)$' \| \ ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$as_dir" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break ++ done ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 ++echo "$as_me: error: cannot create directory $as_dir" >&2;} ++ { (exit 1); exit 1; }; }; } ++ # echo "creating $dirpart/$file" ++ echo '# dummy' > "$dirpart/$file" ++ done ++done ++ ;; ++ "libtool":C) ++ ++ # See if we are running on zsh, and set the options which allow our ++ # commands through without removal of \ escapes. ++ if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++ fi ++ ++ cfgfile="${ofile}T" ++ trap "$RM \"$cfgfile\"; exit 1" 1 2 15 ++ $RM "$cfgfile" ++ ++ cat <<_LT_EOF >> "$cfgfile" ++#! $SHELL ++ ++# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. ++# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION ++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: ++# NOTE: Changes made to this file will be lost: look at ltmain.sh. ++# ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, ++# 2006, 2007, 2008 Free Software Foundation, Inc. ++# Written by Gordon Matzigkeit, 1996 ++# ++# This file is part of GNU Libtool. ++# ++# GNU Libtool is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# As a special exception to the GNU General Public License, ++# if you distribute this file as part of a program or library that ++# is built using GNU Libtool, you may include this file under the ++# same distribution terms that you use for the rest of that program. ++# ++# GNU Libtool is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with GNU Libtool; see the file COPYING. If not, a copy ++# can be downloaded from http://www.gnu.org/licenses/gpl.html, or ++# obtained by writing to the Free Software Foundation, Inc., ++# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ ++ ++# The names of the tagged configurations supported by this script. ++available_tags="" ++ ++# ### BEGIN LIBTOOL CONFIG ++ ++# Which release of libtool.m4 was used? ++macro_version=$macro_version ++macro_revision=$macro_revision ++ ++# Whether or not to build shared libraries. ++build_libtool_libs=$enable_shared ++ ++# Whether or not to build static libraries. ++build_old_libs=$enable_static ++ ++# What type of objects to build. ++pic_mode=$pic_mode ++ ++# Whether or not to optimize for fast installation. ++fast_install=$enable_fast_install ++ ++# The host system. ++host_alias=$host_alias ++host=$host ++host_os=$host_os ++ ++# The build system. ++build_alias=$build_alias ++build=$build ++build_os=$build_os ++ ++# A sed program that does not truncate output. ++SED=$lt_SED ++ ++# Sed that helps us avoid accidentally triggering echo(1) options like -n. ++Xsed="\$SED -e 1s/^X//" ++ ++# A grep program that handles long lines. ++GREP=$lt_GREP ++ ++# An ERE matcher. ++EGREP=$lt_EGREP ++ ++# A literal string matcher. ++FGREP=$lt_FGREP ++ ++# A BSD- or MS-compatible name lister. ++NM=$lt_NM ++ ++# Whether we need soft or hard links. ++LN_S=$lt_LN_S ++ ++# What is the maximum length of a command? ++max_cmd_len=$max_cmd_len ++ ++# Object file suffix (normally "o"). ++objext=$ac_objext ++ ++# Executable file suffix (normally ""). ++exeext=$exeext ++ ++# whether the shell understands "unset". ++lt_unset=$lt_unset ++ ++# turn spaces into newlines. ++SP2NL=$lt_lt_SP2NL ++ ++# turn newlines into spaces. ++NL2SP=$lt_lt_NL2SP ++ ++# How to create reloadable object files. ++reload_flag=$lt_reload_flag ++reload_cmds=$lt_reload_cmds ++ ++# Method to check whether dependent libraries are shared objects. ++deplibs_check_method=$lt_deplibs_check_method ++ ++# Command to use when deplibs_check_method == "file_magic". ++file_magic_cmd=$lt_file_magic_cmd ++ ++# The archiver. ++AR=$lt_AR ++AR_FLAGS=$lt_AR_FLAGS ++ ++# A symbol stripping program. ++STRIP=$lt_STRIP ++ ++# Commands used to install an old-style archive. ++RANLIB=$lt_RANLIB ++old_postinstall_cmds=$lt_old_postinstall_cmds ++old_postuninstall_cmds=$lt_old_postuninstall_cmds ++ ++# A C compiler. ++LTCC=$lt_CC ++ ++# LTCC compiler flags. ++LTCFLAGS=$lt_CFLAGS ++ ++# Take the output of nm and produce a listing of raw symbols and C names. ++global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe ++ ++# Transform the output of nm in a proper C declaration. ++global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl ++ ++# Transform the output of nm in a C name address pair. ++global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address ++ ++# Transform the output of nm in a C name address pair when lib prefix is needed. ++global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix ++ ++# The name of the directory that contains temporary libtool files. ++objdir=$objdir ++ ++# Shell to use when invoking shell scripts. ++SHELL=$lt_SHELL ++ ++# An echo program that does not interpret backslashes. ++ECHO=$lt_ECHO ++ ++# Used to examine libraries when file_magic_cmd begins with "file". ++MAGIC_CMD=$MAGIC_CMD ++ ++# Must we lock files when doing compilation? ++need_locks=$lt_need_locks ++ ++# Tool to manipulate archived DWARF debug symbol files on Mac OS X. ++DSYMUTIL=$lt_DSYMUTIL ++ ++# Tool to change global to local symbols on Mac OS X. ++NMEDIT=$lt_NMEDIT ++ ++# Tool to manipulate fat objects and archives on Mac OS X. ++LIPO=$lt_LIPO ++ ++# ldd/readelf like tool for Mach-O binaries on Mac OS X. ++OTOOL=$lt_OTOOL ++ ++# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. ++OTOOL64=$lt_OTOOL64 ++ ++# Old archive suffix (normally "a"). ++libext=$libext ++ ++# Shared library suffix (normally ".so"). ++shrext_cmds=$lt_shrext_cmds ++ ++# The commands to extract the exported symbol list from a shared archive. ++extract_expsyms_cmds=$lt_extract_expsyms_cmds ++ ++# Variables whose values should be saved in libtool wrapper scripts and ++# restored at link time. ++variables_saved_for_relink=$lt_variables_saved_for_relink ++ ++# Do we need the "lib" prefix for modules? ++need_lib_prefix=$need_lib_prefix ++ ++# Do we need a version for libraries? ++need_version=$need_version ++ ++# Library versioning type. ++version_type=$version_type ++ ++# Shared library runtime path variable. ++runpath_var=$runpath_var ++ ++# Shared library path variable. ++shlibpath_var=$shlibpath_var ++ ++# Is shlibpath searched before the hard-coded library search path? ++shlibpath_overrides_runpath=$shlibpath_overrides_runpath ++ ++# Format of library name prefix. ++libname_spec=$lt_libname_spec ++ ++# List of archive names. First name is the real one, the rest are links. ++# The last name is the one that the linker finds with -lNAME ++library_names_spec=$lt_library_names_spec ++ ++# The coded name of the library, if different from the real name. ++soname_spec=$lt_soname_spec ++ ++# Command to use after installation of a shared archive. ++postinstall_cmds=$lt_postinstall_cmds ++ ++# Command to use after uninstallation of a shared archive. ++postuninstall_cmds=$lt_postuninstall_cmds ++ ++# Commands used to finish a libtool library installation in a directory. ++finish_cmds=$lt_finish_cmds ++ ++# As "finish_cmds", except a single script fragment to be evaled but ++# not shown. ++finish_eval=$lt_finish_eval ++ ++# Whether we should hardcode library paths into libraries. ++hardcode_into_libs=$hardcode_into_libs ++ ++# Compile-time system search path for libraries. ++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec ++ ++# Run-time system search path for libraries. ++sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec ++ ++# Whether dlopen is supported. ++dlopen_support=$enable_dlopen ++ ++# Whether dlopen of programs is supported. ++dlopen_self=$enable_dlopen_self ++ ++# Whether dlopen of statically linked programs is supported. ++dlopen_self_static=$enable_dlopen_self_static ++ ++# Commands to strip libraries. ++old_striplib=$lt_old_striplib ++striplib=$lt_striplib ++ ++ ++# The linker used to build libraries. ++LD=$lt_LD ++ ++# Commands used to build an old-style archive. ++old_archive_cmds=$lt_old_archive_cmds ++ ++# A language specific compiler. ++CC=$lt_compiler ++ ++# Is the compiler the GNU compiler? ++with_gcc=$GCC ++ ++# Compiler flag to turn off builtin functions. ++no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag ++ ++# How to pass a linker flag through the compiler. ++wl=$lt_lt_prog_compiler_wl ++ ++# Additional compiler flags for building library objects. ++pic_flag=$lt_lt_prog_compiler_pic ++ ++# Compiler flag to prevent dynamic linking. ++link_static_flag=$lt_lt_prog_compiler_static ++ ++# Does compiler simultaneously support -c and -o options? ++compiler_c_o=$lt_lt_cv_prog_compiler_c_o ++ ++# Whether or not to add -lc for building shared libraries. ++build_libtool_need_lc=$archive_cmds_need_lc ++ ++# Whether or not to disallow shared libs when runtime libs are static. ++allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes ++ ++# Compiler flag to allow reflexive dlopens. ++export_dynamic_flag_spec=$lt_export_dynamic_flag_spec ++ ++# Compiler flag to generate shared objects directly from archives. ++whole_archive_flag_spec=$lt_whole_archive_flag_spec ++ ++# Whether the compiler copes with passing no objects directly. ++compiler_needs_object=$lt_compiler_needs_object ++ ++# Create an old-style archive from a shared archive. ++old_archive_from_new_cmds=$lt_old_archive_from_new_cmds ++ ++# Create a temporary old-style archive to link instead of a shared archive. ++old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds ++ ++# Commands used to build a shared archive. ++archive_cmds=$lt_archive_cmds ++archive_expsym_cmds=$lt_archive_expsym_cmds ++ ++# Commands used to build a loadable module if different from building ++# a shared archive. ++module_cmds=$lt_module_cmds ++module_expsym_cmds=$lt_module_expsym_cmds ++ ++# Whether we are building with GNU ld or not. ++with_gnu_ld=$lt_with_gnu_ld ++ ++# Flag that allows shared libraries with undefined symbols to be built. ++allow_undefined_flag=$lt_allow_undefined_flag ++ ++# Flag that enforces no undefined symbols. ++no_undefined_flag=$lt_no_undefined_flag ++ ++# Flag to hardcode \$libdir into a binary during linking. ++# This must work even if \$libdir does not exist ++hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec ++ ++# If ld is used when linking, flag to hardcode \$libdir into a binary ++# during linking. This must work even if \$libdir does not exist. ++hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld ++ ++# Whether we need a single "-rpath" flag with a separated argument. ++hardcode_libdir_separator=$lt_hardcode_libdir_separator ++ ++# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes ++# DIR into the resulting binary. ++hardcode_direct=$hardcode_direct ++ ++# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes ++# DIR into the resulting binary and the resulting library dependency is ++# "absolute",i.e impossible to change by setting \${shlibpath_var} if the ++# library is relocated. ++hardcode_direct_absolute=$hardcode_direct_absolute ++ ++# Set to "yes" if using the -LDIR flag during linking hardcodes DIR ++# into the resulting binary. ++hardcode_minus_L=$hardcode_minus_L ++ ++# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR ++# into the resulting binary. ++hardcode_shlibpath_var=$hardcode_shlibpath_var ++ ++# Set to "yes" if building a shared library automatically hardcodes DIR ++# into the library and all subsequent libraries and executables linked ++# against it. ++hardcode_automatic=$hardcode_automatic ++ ++# Set to yes if linker adds runtime paths of dependent libraries ++# to runtime path list. ++inherit_rpath=$inherit_rpath ++ ++# Whether libtool must link a program against all its dependency libraries. ++link_all_deplibs=$link_all_deplibs ++ ++# Fix the shell variable \$srcfile for the compiler. ++fix_srcfile_path=$lt_fix_srcfile_path ++ ++# Set to "yes" if exported symbols are required. ++always_export_symbols=$always_export_symbols ++ ++# The commands to list exported symbols. ++export_symbols_cmds=$lt_export_symbols_cmds ++ ++# Symbols that should not be listed in the preloaded symbols. ++exclude_expsyms=$lt_exclude_expsyms ++ ++# Symbols that must always be exported. ++include_expsyms=$lt_include_expsyms ++ ++# Commands necessary for linking programs (against libraries) with templates. ++prelink_cmds=$lt_prelink_cmds ++ ++# Specify filename containing input files. ++file_list_spec=$lt_file_list_spec ++ ++# How to hardcode a shared library path into an executable. ++hardcode_action=$hardcode_action ++ ++# ### END LIBTOOL CONFIG ++ ++_LT_EOF ++ ++ case $host_os in ++ aix3*) ++ cat <<\_LT_EOF >> "$cfgfile" ++# AIX sometimes has problems with the GCC collect2 program. For some ++# reason, if we set the COLLECT_NAMES environment variable, the problems ++# vanish in a puff of smoke. ++if test "X${COLLECT_NAMES+set}" != Xset; then ++ COLLECT_NAMES= ++ export COLLECT_NAMES ++fi ++_LT_EOF ++ ;; ++ esac ++ ++ ++ltmain="$ac_aux_dir/ltmain.sh" ++ ++ ++ # We use sed instead of cat because bash on DJGPP gets confused if ++ # if finds mixed CR/LF and LF-only lines. Since sed operates in ++ # text mode, it properly converts lines to CR/LF. This bash problem ++ # is reportedly fixed, but why not run on old versions too? ++ sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ ++ || (rm -f "$cfgfile"; exit 1) ++ ++ case $xsi_shell in ++ yes) ++ cat << \_LT_EOF >> "$cfgfile" ++ ++# func_dirname file append nondir_replacement ++# Compute the dirname of FILE. If nonempty, add APPEND to the result, ++# otherwise set result to NONDIR_REPLACEMENT. ++func_dirname () ++{ ++ case ${1} in ++ */*) func_dirname_result="${1%/*}${2}" ;; ++ * ) func_dirname_result="${3}" ;; ++ esac ++} ++ ++# func_basename file ++func_basename () ++{ ++ func_basename_result="${1##*/}" ++} ++ ++# func_dirname_and_basename file append nondir_replacement ++# perform func_basename and func_dirname in a single function ++# call: ++# dirname: Compute the dirname of FILE. If nonempty, ++# add APPEND to the result, otherwise set result ++# to NONDIR_REPLACEMENT. ++# value returned in "$func_dirname_result" ++# basename: Compute filename of FILE. ++# value retuned in "$func_basename_result" ++# Implementation must be kept synchronized with func_dirname ++# and func_basename. For efficiency, we do not delegate to ++# those functions but instead duplicate the functionality here. ++func_dirname_and_basename () ++{ ++ case ${1} in ++ */*) func_dirname_result="${1%/*}${2}" ;; ++ * ) func_dirname_result="${3}" ;; ++ esac ++ func_basename_result="${1##*/}" ++} ++ ++# func_stripname prefix suffix name ++# strip PREFIX and SUFFIX off of NAME. ++# PREFIX and SUFFIX must not contain globbing or regex special ++# characters, hashes, percent signs, but SUFFIX may contain a leading ++# dot (in which case that matches only a dot). ++func_stripname () ++{ ++ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are ++ # positional parameters, so assign one to ordinary parameter first. ++ func_stripname_result=${3} ++ func_stripname_result=${func_stripname_result#"${1}"} ++ func_stripname_result=${func_stripname_result%"${2}"} ++} ++ ++# func_opt_split ++func_opt_split () ++{ ++ func_opt_split_opt=${1%%=*} ++ func_opt_split_arg=${1#*=} ++} ++ ++# func_lo2o object ++func_lo2o () ++{ ++ case ${1} in ++ *.lo) func_lo2o_result=${1%.lo}.${objext} ;; ++ *) func_lo2o_result=${1} ;; ++ esac ++} ++ ++# func_xform libobj-or-source ++func_xform () ++{ ++ func_xform_result=${1%.*}.lo ++} ++ ++# func_arith arithmetic-term... ++func_arith () ++{ ++ func_arith_result=$(( $* )) ++} ++ ++# func_len string ++# STRING may not start with a hyphen. ++func_len () ++{ ++ func_len_result=${#1} ++} ++ ++_LT_EOF ++ ;; ++ *) # Bourne compatible functions. ++ cat << \_LT_EOF >> "$cfgfile" ++ ++# func_dirname file append nondir_replacement ++# Compute the dirname of FILE. If nonempty, add APPEND to the result, ++# otherwise set result to NONDIR_REPLACEMENT. ++func_dirname () ++{ ++ # Extract subdirectory from the argument. ++ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` ++ if test "X$func_dirname_result" = "X${1}"; then ++ func_dirname_result="${3}" ++ else ++ func_dirname_result="$func_dirname_result${2}" ++ fi ++} ++ ++# func_basename file ++func_basename () ++{ ++ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` ++} ++ ++ ++# func_stripname prefix suffix name ++# strip PREFIX and SUFFIX off of NAME. ++# PREFIX and SUFFIX must not contain globbing or regex special ++# characters, hashes, percent signs, but SUFFIX may contain a leading ++# dot (in which case that matches only a dot). ++# func_strip_suffix prefix name ++func_stripname () ++{ ++ case ${2} in ++ .*) func_stripname_result=`$ECHO "X${3}" \ ++ | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; ++ *) func_stripname_result=`$ECHO "X${3}" \ ++ | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; ++ esac ++} ++ ++# sed scripts: ++my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q' ++my_sed_long_arg='1s/^-[^=]*=//' ++ ++# func_opt_split ++func_opt_split () ++{ ++ func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` ++ func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` ++} ++ ++# func_lo2o object ++func_lo2o () ++{ ++ func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` ++} ++ ++# func_xform libobj-or-source ++func_xform () ++{ ++ func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'` ++} ++ ++# func_arith arithmetic-term... ++func_arith () ++{ ++ func_arith_result=`expr "$@"` ++} ++ ++# func_len string ++# STRING may not start with a hyphen. ++func_len () ++{ ++ func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` ++} ++ ++_LT_EOF ++esac ++ ++case $lt_shell_append in ++ yes) ++ cat << \_LT_EOF >> "$cfgfile" ++ ++# func_append var value ++# Append VALUE to the end of shell variable VAR. ++func_append () ++{ ++ eval "$1+=\$2" ++} ++_LT_EOF ++ ;; ++ *) ++ cat << \_LT_EOF >> "$cfgfile" ++ ++# func_append var value ++# Append VALUE to the end of shell variable VAR. ++func_append () ++{ ++ eval "$1=\$$1\$2" ++} ++ ++_LT_EOF ++ ;; ++ esac ++ ++ ++ sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ ++ || (rm -f "$cfgfile"; exit 1) ++ ++ mv -f "$cfgfile" "$ofile" || ++ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") ++ chmod +x "$ofile" ++ ++ ;; ++ "intltool":C) ++ ++for file in intltool-extract intltool-merge intltool-update; do ++ sed -e "s|@INTLTOOL_EXTRACT@|`pwd`/intltool-extract|g" \ ++ -e "s|@INTLTOOL_LIBDIR@|${INTLTOOL_LIBDIR}|g" \ ++ -e "s|@INTLTOOL_PERL@|${INTLTOOL_PERL}|g" \ ++ < ${ac_aux_dir}/${file}.in > ${file}.out ++ if cmp -s ${file} ${file}.out 2>/dev/null; then ++ rm -f ${file}.out ++ else ++ mv -f ${file}.out ${file} ++ fi ++ chmod ugo+x ${file} ++ chmod u+w ${file} ++done ++ ++ ;; ++ "default-1":C) case "$CONFIG_FILES" in *po/Makefile.in*) ++ sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile ++ esac ;; ++ "po/stamp-it":C) ++ rm -f "po/stamp-it" "po/stamp-it.tmp" "po/POTFILES" "po/Makefile.tmp" ++ >"po/stamp-it.tmp" ++ sed '/^#/d ++ s/^[[].*] *// ++ /^[ ]*$/d ++ '"s|^| $ac_top_srcdir/|" \ ++ "$srcdir/po/POTFILES.in" | sed '$!s/$/ \\/' >"po/POTFILES" ++ ++ if test ! -f "po/Makefile"; then ++ { { echo "$as_me:$LINENO: error: po/Makefile is not ready." >&5 ++echo "$as_me: error: po/Makefile is not ready." >&2;} ++ { (exit 1); exit 1; }; } ++ fi ++ mv "po/Makefile" "po/Makefile.tmp" ++ sed '/^POTFILES =/,/[^\\]$/ { ++ /^POTFILES =/!d ++ r po/POTFILES ++ } ++ ' "po/Makefile.tmp" >"po/Makefile" ++ rm -f "po/Makefile.tmp" ++ mv "po/stamp-it.tmp" "po/stamp-it" ++ ;; ++ ++ esac ++done # for ac_tag ++ ++ ++{ (exit 0); exit 0; } ++_ACEOF ++chmod +x $CONFIG_STATUS ++ac_clean_files=$ac_clean_files_save ++ ++ ++# configure is writing to config.log, and then calls config.status. ++# config.status does its own redirection, appending to config.log. ++# Unfortunately, on DOS this fails, as config.log is still kept open ++# by configure, so config.status won't be able to write to it; its ++# output is simply discarded. So we exec the FD to /dev/null, ++# effectively closing config.log, so it can be properly (re)opened and ++# appended to by config.status. When coming back to configure, we ++# need to make the FD available again. ++if test "$no_create" != yes; then ++ ac_cs_success=: ++ ac_config_status_args= ++ test "$silent" = yes && ++ ac_config_status_args="$ac_config_status_args --quiet" ++ exec 5>/dev/null ++ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false ++ exec 5>>config.log ++ # Use ||, not &&, to avoid exiting from the if with $? = 1, which ++ # would make configure fail if this is the last instruction. ++ $ac_cs_success || { (exit 1); exit 1; } ++fi ++ ++ ++echo " ++ GNOME Power Manager $VERSION ++ ============================= ++ ++ prefix: ${prefix} ++ datadir: ${datadir} ++ compiler: ${CC} ++ cflags: ${CFLAGS} ++ libnotify support: ${have_libnotify} ++ unique support: ${have_unique} ++ Building extra applets: ${enable_applets} ++ DPMS support: ${have_dpms} ++ PolicyKit support: ${have_polkit} ++ XEVENTS support: ${have_xevents} ++ Self test support: ${have_tests} ++ GConf default support: ${have_gconfdefaults} ++ Docbook support: ${enable_docbook_docs} ++ documentation dir: $DOCDIR ++ dbus-1 system.d dir: $DBUS_SYS_DIR ++ dbus-1 services dir: $DBUS_SERVICES_DIR ++ gconf-schema dir: $GCONF_SCHEMA_FILE_DIR ++" ++ +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/autom4te.cache/requests gnome-power-manager-2.24.0.new/autom4te.cache/requests +--- gnome-power-manager-2.24.0/autom4te.cache/requests 1970-01-01 01:00:00.000000000 +0100 ++++ gnome-power-manager-2.24.0.new/autom4te.cache/requests 2008-11-20 18:37:24.000000000 +0100 +@@ -0,0 +1,526 @@ ++# This file was generated by Autom4te Wed Jul 23 10:17:38 UTC 2008. ++# It contains the lists of macros which have been traced. ++# It can be safely removed. ++ ++@request = ( ++ bless( [ ++ '0', ++ 1, ++ [ ++ '/usr/share/autoconf' ++ ], ++ [ ++ '/usr/share/autoconf/autoconf/autoconf.m4f', ++ '/usr/share/aclocal/argz.m4', ++ '/usr/share/aclocal/gconf-2.m4', ++ '/usr/share/aclocal/glib-gettext.m4', ++ '/usr/share/aclocal/gnome-compiler-flags.m4', ++ '/usr/share/aclocal/libtool.m4', ++ '/usr/share/aclocal/ltdl.m4', ++ '/usr/share/aclocal/ltoptions.m4', ++ '/usr/share/aclocal/ltsugar.m4', ++ '/usr/share/aclocal/ltversion.m4', ++ '/usr/share/aclocal/lt~obsolete.m4', ++ '/usr/share/aclocal/pkg.m4', ++ '/usr/share/aclocal-1.9/amversion.m4', ++ '/usr/share/aclocal-1.9/auxdir.m4', ++ '/usr/share/aclocal-1.9/cond.m4', ++ '/usr/share/aclocal-1.9/depend.m4', ++ '/usr/share/aclocal-1.9/depout.m4', ++ '/usr/share/aclocal-1.9/header.m4', ++ '/usr/share/aclocal-1.9/init.m4', ++ '/usr/share/aclocal-1.9/install-sh.m4', ++ '/usr/share/aclocal-1.9/lead-dot.m4', ++ '/usr/share/aclocal-1.9/make.m4', ++ '/usr/share/aclocal-1.9/minuso.m4', ++ '/usr/share/aclocal-1.9/missing.m4', ++ '/usr/share/aclocal-1.9/mkdirp.m4', ++ '/usr/share/aclocal-1.9/options.m4', ++ '/usr/share/aclocal-1.9/runlog.m4', ++ '/usr/share/aclocal-1.9/sanity.m4', ++ '/usr/share/aclocal-1.9/strip.m4', ++ '/usr/share/aclocal-1.9/tar.m4', ++ 'm4/gnome-doc-utils.m4', ++ 'm4/intltool.m4', ++ 'configure.ac' ++ ], ++ { ++ 'GNOME_DOC_DEFINES' => 1, ++ 'AM_ENABLE_STATIC' => 1, ++ 'AC_LIBTOOL_LANG_RC_CONFIG' => 1, ++ '_LT_AC_SHELL_INIT' => 1, ++ 'AC_DEFUN' => 1, ++ '_LT_AC_LANG_CXX_CONFIG' => 1, ++ 'AC_PROG_LIBTOOL' => 1, ++ 'AM_PROG_MKDIR_P' => 1, ++ 'AM_AUTOMAKE_VERSION' => 1, ++ 'AM_MISSING_PROG' => 1, ++ 'AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH' => 1, ++ '_LT_AC_LANG_C_CONFIG' => 1, ++ 'AM_PROG_INSTALL_STRIP' => 1, ++ '_m4_warn' => 1, ++ 'AC_LIBTOOL_OBJDIR' => 1, ++ 'gl_FUNC_ARGZ' => 1, ++ 'LTOBSOLETE_VERSION' => 1, ++ 'AM_SANITY_CHECK' => 1, ++ 'AC_LIBTOOL_LANG_GCJ_CONFIG' => 1, ++ 'AC_LIBTOOL_PROG_COMPILER_PIC' => 1, ++ 'LT_LIB_M' => 1, ++ '_LT_AC_CHECK_DLFCN' => 1, ++ 'AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE' => 1, ++ 'LTSUGAR_VERSION' => 1, ++ '_LT_PROG_LTMAIN' => 1, ++ 'LT_SYS_SYMBOL_USCORE' => 1, ++ '_AM_PROG_TAR' => 1, ++ 'AC_LIBTOOL_GCJ' => 1, ++ 'LT_SYS_DLOPEN_DEPLIBS' => 1, ++ 'LT_FUNC_DLSYM_USCORE' => 1, ++ '_LT_AC_LANG_F77' => 1, ++ 'AC_LIBTOOL_CONFIG' => 1, ++ 'AC_LTDL_DLLIB' => 1, ++ 'AM_DISABLE_SHARED' => 1, ++ '_LTDL_SETUP' => 1, ++ 'AM_PROG_LIBTOOL' => 1, ++ '_LT_AC_LANG_CXX' => 1, ++ 'AC_LIB_LTDL' => 1, ++ '_LT_AC_FILE_LTDLL_C' => 1, ++ 'AM_PROG_LD' => 1, ++ 'AU_DEFUN' => 1, ++ 'AC_PROG_NM' => 1, ++ 'AC_LIBTOOL_DLOPEN' => 1, ++ 'IT_PROG_INTLTOOL' => 1, ++ 'AC_PROG_LD' => 1, ++ 'AC_PROG_LD_GNU' => 1, ++ 'AC_ENABLE_FAST_INSTALL' => 1, ++ 'AM_GCONF_SOURCE_2' => 1, ++ 'AC_LIBTOOL_FC' => 1, ++ 'LTDL_CONVENIENCE' => 1, ++ '_AM_SET_OPTION' => 1, ++ 'AC_LTDL_PREOPEN' => 1, ++ '_LT_LINKER_BOILERPLATE' => 1, ++ 'GLIB_RUN_PROG' => 1, ++ 'AC_LIBTOOL_LANG_CXX_CONFIG' => 1, ++ 'AC_LIBTOOL_PROG_CC_C_O' => 1, ++ 'gl_PREREQ_ARGZ' => 1, ++ 'LT_SUPPORTED_TAG' => 1, ++ 'AM_OUTPUT_DEPENDENCY_COMMANDS' => 1, ++ 'LT_PROG_RC' => 1, ++ 'LT_SYS_MODULE_EXT' => 1, ++ 'AC_DEFUN_ONCE' => 1, ++ '_LT_AC_LANG_GCJ' => 1, ++ 'AC_LTDL_OBJDIR' => 1, ++ '_LT_PATH_TOOL_PREFIX' => 1, ++ 'AC_LIBTOOL_RC' => 1, ++ 'AC_DISABLE_FAST_INSTALL' => 1, ++ '_LT_AC_PROG_ECHO_BACKSLASH' => 1, ++ '_LT_AC_SYS_LIBPATH_AIX' => 1, ++ '_LT_AC_TRY_DLOPEN_SELF' => 1, ++ 'AC_TRY_X_COMPILE' => 1, ++ 'include' => 1, ++ 'LT_AC_PROG_SED' => 1, ++ 'AM_ENABLE_SHARED' => 1, ++ 'LTDL_INSTALLABLE' => 1, ++ '_LT_AC_LANG_GCJ_CONFIG' => 1, ++ 'AC_ENABLE_SHARED' => 1, ++ 'AC_ENABLE_STATIC' => 1, ++ 'AC_LIBTOOL_SYS_HARD_LINK_LOCKS' => 1, ++ 'AM_PROG_CC_C_O' => 1, ++ '_LT_AC_TAGVAR' => 1, ++ 'AC_LIBTOOL_LANG_F77_CONFIG' => 1, ++ 'AM_CONDITIONAL' => 1, ++ 'LT_LIB_DLLOAD' => 1, ++ 'LTDL_INIT' => 1, ++ 'LTVERSION_VERSION' => 1, ++ '_LT_PROG_CXX' => 1, ++ '_LT_PROG_F77' => 1, ++ 'AM_PROG_INSTALL_SH' => 1, ++ 'm4_include' => 1, ++ 'AC_PROG_EGREP' => 1, ++ '_AC_AM_CONFIG_HEADER_HOOK' => 1, ++ 'AC_PATH_MAGIC' => 1, ++ 'AC_LTDL_SYSSEARCHPATH' => 1, ++ 'GNOME_DOC_INIT' => 1, ++ 'AM_MAKE_INCLUDE' => 1, ++ 'LT_CMD_MAX_LEN' => 1, ++ '_LT_AC_TAGCONFIG' => 1, ++ 'm4_pattern_forbid' => 1, ++ '_LT_LINKER_OPTION' => 1, ++ 'AC_LIBTOOL_COMPILER_OPTION' => 1, ++ 'AC_DISABLE_SHARED' => 1, ++ '_LT_COMPILER_BOILERPLATE' => 1, ++ 'AC_LIBTOOL_WIN32_DLL' => 1, ++ 'AC_LIBTOOL_SETUP' => 1, ++ 'AM_GLIB_GNU_GETTEXT' => 1, ++ 'AC_PROG_LD_RELOAD_FLAG' => 1, ++ 'AC_LTDL_DLSYM_USCORE' => 1, ++ 'AM_MISSING_HAS_RUN' => 1, ++ 'LT_LANG' => 1, ++ 'LT_SYS_DLSEARCH_PATH' => 1, ++ 'LT_CONFIG_LTDL_DIR' => 1, ++ 'IT_PO_SUBDIR' => 1, ++ 'AC_LIBTOOL_DLOPEN_SELF' => 1, ++ 'LT_OUTPUT' => 1, ++ 'AC_LIBTOOL_PROG_LD_SHLIBS' => 1, ++ 'AC_CHECK_X_HEADER' => 1, ++ '_PKG_SHORT_ERRORS_SUPPORTED' => 1, ++ 'AC_WITH_LTDL' => 1, ++ 'AC_LIBTOOL_LINKER_OPTION' => 1, ++ 'PKG_CHECK_EXISTS' => 1, ++ 'LT_AC_PROG_RC' => 1, ++ 'AC_LIBTOOL_CXX' => 1, ++ 'LT_INIT' => 1, ++ 'LT_AC_PROG_GCJ' => 1, ++ 'LT_SYS_DLOPEN_SELF' => 1, ++ 'AM_DEP_TRACK' => 1, ++ 'AM_DISABLE_STATIC' => 1, ++ '_AC_PROG_LIBTOOL' => 1, ++ 'AM_CONFIG_HEADER' => 1, ++ '_AM_IF_OPTION' => 1, ++ 'AC_PATH_TOOL_PREFIX' => 1, ++ 'AC_LIBTOOL_F77' => 1, ++ 'm4_pattern_allow' => 1, ++ 'AM_SET_LEADING_DOT' => 1, ++ 'LT_AC_PROG_EGREP' => 1, ++ '_LT_PROG_FC' => 1, ++ '_AM_DEPENDENCIES' => 1, ++ 'AC_LIBTOOL_LANG_C_CONFIG' => 1, ++ 'LTOPTIONS_VERSION' => 1, ++ '_LT_AC_SYS_COMPILER' => 1, ++ 'AM_PROG_NM' => 1, ++ 'PKG_CHECK_MODULES' => 1, ++ 'AC_LIBLTDL_CONVENIENCE' => 1, ++ 'AC_DEPLIBS_CHECK_METHOD' => 1, ++ 'AM_SET_CURRENT_AUTOMAKE_VERSION' => 1, ++ 'AC_LIBLTDL_INSTALLABLE' => 1, ++ 'AC_LTDL_ENABLE_INSTALL' => 1, ++ 'AC_LIBTOOL_SYS_DYNAMIC_LINKER' => 1, ++ 'LT_PROG_GCJ' => 1, ++ 'AM_GLIB_DEFINE_LOCALEDIR' => 1, ++ 'AM_INIT_AUTOMAKE' => 1, ++ 'AC_CHECK_X_LIB' => 1, ++ 'AC_DISABLE_STATIC' => 1, ++ 'GNOME_CXX_WARNINGS' => 1, ++ 'GNOME_COMPILE_WARNINGS' => 1, ++ 'LT_PATH_NM' => 1, ++ 'AC_LTDL_SHLIBEXT' => 1, ++ '_LT_AC_LOCK' => 1, ++ '_LT_AC_LANG_RC_CONFIG' => 1, ++ 'LT_SYS_MODULE_PATH' => 1, ++ 'AC_LIBTOOL_POSTDEP_PREDEP' => 1, ++ 'LT_WITH_LTDL' => 1, ++ 'AC_LTDL_SHLIBPATH' => 1, ++ 'AC_PROG_INTLTOOL' => 1, ++ 'AM_AUX_DIR_EXPAND' => 1, ++ '_LT_AC_LANG_F77_CONFIG' => 1, ++ 'AC_LIBTOOL_PROG_COMPILER_NO_RTTI' => 1, ++ '_AM_SET_OPTIONS' => 1, ++ '_LT_COMPILER_OPTION' => 1, ++ '_AM_OUTPUT_DEPENDENCY_COMMANDS' => 1, ++ 'AM_RUN_LOG' => 1, ++ 'AC_LIBTOOL_PICMODE' => 1, ++ 'AC_LIBTOOL_SYS_OLD_ARCHIVE' => 1, ++ 'AC_LTDL_SYS_DLOPEN_DEPLIBS' => 1, ++ 'LT_PATH_LD' => 1, ++ 'AC_CHECK_LIBM' => 1, ++ 'AC_LIBTOOL_SYS_LIB_STRIP' => 1, ++ '_AM_MANGLE_OPTION' => 1, ++ 'AC_LTDL_SYMBOL_USCORE' => 1, ++ 'AC_LIBTOOL_SYS_MAX_CMD_LEN' => 1, ++ 'AM_SET_DEPDIR' => 1, ++ 'HANDLE_X_PATH_ARG' => 1, ++ '_LT_CC_BASENAME' => 1, ++ '_LT_LIBSOURCES' => 1, ++ 'PKG_PROG_PKG_CONFIG' => 1, ++ '_LT_LIBOBJ' => 1 ++ } ++ ], 'Autom4te::Request' ), ++ bless( [ ++ '1', ++ 1, ++ [ ++ '/usr/share/autoconf' ++ ], ++ [ ++ '/usr/share/autoconf/autoconf/autoconf.m4f', ++ 'aclocal.m4', ++ 'configure.ac' ++ ], ++ { ++ '_LT_AC_TAGCONFIG' => 1, ++ 'AM_PROG_F77_C_O' => 1, ++ 'm4_pattern_forbid' => 1, ++ 'AC_INIT' => 1, ++ 'AC_CANONICAL_TARGET' => 1, ++ 'AC_SUBST' => 1, ++ 'AC_CONFIG_LIBOBJ_DIR' => 1, ++ 'AC_FC_SRCEXT' => 1, ++ 'AC_CANONICAL_HOST' => 1, ++ 'AC_PROG_LIBTOOL' => 1, ++ 'AM_INIT_AUTOMAKE' => 1, ++ 'AC_CONFIG_SUBDIRS' => 1, ++ 'AM_AUTOMAKE_VERSION' => 1, ++ 'LT_CONFIG_LTDL_DIR' => 1, ++ 'AC_REQUIRE_AUX_FILE' => 1, ++ 'AC_CONFIG_LINKS' => 1, ++ 'm4_sinclude' => 1, ++ 'LT_SUPPORTED_TAG' => 1, ++ 'AM_MAINTAINER_MODE' => 1, ++ 'AM_GNU_GETTEXT_INTL_SUBDIR' => 1, ++ '_m4_warn' => 1, ++ 'AM_PROG_CXX_C_O' => 1, ++ 'AM_ENABLE_MULTILIB' => 1, ++ 'AC_CONFIG_FILES' => 1, ++ 'LT_INIT' => 1, ++ 'include' => 1, ++ 'AM_GNU_GETTEXT' => 1, ++ 'AC_LIBSOURCE' => 1, ++ 'AM_PROG_FC_C_O' => 1, ++ 'AC_CANONICAL_BUILD' => 1, ++ 'AC_FC_FREEFORM' => 1, ++ 'AH_OUTPUT' => 1, ++ '_AM_SUBST_NOTMAKE' => 1, ++ 'AC_CONFIG_AUX_DIR' => 1, ++ 'sinclude' => 1, ++ 'm4_pattern_allow' => 1, ++ 'AM_PROG_CC_C_O' => 1, ++ 'AC_CANONICAL_SYSTEM' => 1, ++ 'AM_CONDITIONAL' => 1, ++ 'AC_CONFIG_HEADERS' => 1, ++ 'AC_DEFINE_TRACE_LITERAL' => 1, ++ 'm4_include' => 1, ++ 'AC_SUBST_TRACE' => 1 ++ } ++ ], 'Autom4te::Request' ), ++ bless( [ ++ '2', ++ 1, ++ [ ++ '/usr/share/autoconf' ++ ], ++ [ ++ '/usr/share/autoconf/autoconf/autoconf.m4f', ++ '/usr/share/aclocal/argz.m4', ++ '/usr/share/aclocal/gconf-2.m4', ++ '/usr/share/aclocal/glib-gettext.m4', ++ '/usr/share/aclocal/gnome-compiler-flags.m4', ++ '/usr/share/aclocal/ltdl.m4', ++ '/usr/share/aclocal/pkg.m4', ++ '/usr/share/aclocal-1.9/amversion.m4', ++ '/usr/share/aclocal-1.9/auxdir.m4', ++ '/usr/share/aclocal-1.9/cond.m4', ++ '/usr/share/aclocal-1.9/depend.m4', ++ '/usr/share/aclocal-1.9/depout.m4', ++ '/usr/share/aclocal-1.9/header.m4', ++ '/usr/share/aclocal-1.9/init.m4', ++ '/usr/share/aclocal-1.9/install-sh.m4', ++ '/usr/share/aclocal-1.9/lead-dot.m4', ++ '/usr/share/aclocal-1.9/make.m4', ++ '/usr/share/aclocal-1.9/minuso.m4', ++ '/usr/share/aclocal-1.9/missing.m4', ++ '/usr/share/aclocal-1.9/mkdirp.m4', ++ '/usr/share/aclocal-1.9/options.m4', ++ '/usr/share/aclocal-1.9/runlog.m4', ++ '/usr/share/aclocal-1.9/sanity.m4', ++ '/usr/share/aclocal-1.9/strip.m4', ++ '/usr/share/aclocal-1.9/tar.m4', ++ 'm4/gnome-doc-utils.m4', ++ 'm4/intltool.m4', ++ 'm4/libtool.m4', ++ 'm4/ltoptions.m4', ++ 'm4/ltsugar.m4', ++ 'm4/ltversion.m4', ++ 'm4/lt~obsolete.m4', ++ 'configure.ac' ++ ], ++ { ++ 'GNOME_DOC_DEFINES' => 1, ++ 'AM_ENABLE_STATIC' => 1, ++ 'AC_LIBTOOL_LANG_RC_CONFIG' => 1, ++ '_LT_AC_SHELL_INIT' => 1, ++ 'AC_DEFUN' => 1, ++ '_LT_AC_LANG_CXX_CONFIG' => 1, ++ 'AC_PROG_LIBTOOL' => 1, ++ 'AM_PROG_MKDIR_P' => 1, ++ 'AM_AUTOMAKE_VERSION' => 1, ++ 'AM_MISSING_PROG' => 1, ++ 'AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH' => 1, ++ '_LT_AC_LANG_C_CONFIG' => 1, ++ 'AM_PROG_INSTALL_STRIP' => 1, ++ '_m4_warn' => 1, ++ 'AC_LIBTOOL_OBJDIR' => 1, ++ 'gl_FUNC_ARGZ' => 1, ++ 'LTOBSOLETE_VERSION' => 1, ++ 'AM_SANITY_CHECK' => 1, ++ 'AC_LIBTOOL_LANG_GCJ_CONFIG' => 1, ++ 'AC_LIBTOOL_PROG_COMPILER_PIC' => 1, ++ 'LT_LIB_M' => 1, ++ '_LT_AC_CHECK_DLFCN' => 1, ++ 'AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE' => 1, ++ 'LTSUGAR_VERSION' => 1, ++ '_LT_PROG_LTMAIN' => 1, ++ 'LT_SYS_SYMBOL_USCORE' => 1, ++ '_AM_PROG_TAR' => 1, ++ 'AC_LIBTOOL_GCJ' => 1, ++ 'LT_SYS_DLOPEN_DEPLIBS' => 1, ++ 'LT_FUNC_DLSYM_USCORE' => 1, ++ '_LT_AC_LANG_F77' => 1, ++ 'AC_LIBTOOL_CONFIG' => 1, ++ 'AC_LTDL_DLLIB' => 1, ++ 'AM_DISABLE_SHARED' => 1, ++ '_LTDL_SETUP' => 1, ++ 'AM_PROG_LIBTOOL' => 1, ++ '_LT_AC_LANG_CXX' => 1, ++ 'AC_LIB_LTDL' => 1, ++ '_LT_AC_FILE_LTDLL_C' => 1, ++ 'AM_PROG_LD' => 1, ++ 'AU_DEFUN' => 1, ++ 'AC_PROG_NM' => 1, ++ 'AC_LIBTOOL_DLOPEN' => 1, ++ 'IT_PROG_INTLTOOL' => 1, ++ 'AC_PROG_LD' => 1, ++ 'AC_PROG_LD_GNU' => 1, ++ 'AC_ENABLE_FAST_INSTALL' => 1, ++ 'AM_GCONF_SOURCE_2' => 1, ++ 'AC_LIBTOOL_FC' => 1, ++ 'LTDL_CONVENIENCE' => 1, ++ '_AM_SET_OPTION' => 1, ++ 'AC_LTDL_PREOPEN' => 1, ++ '_LT_LINKER_BOILERPLATE' => 1, ++ 'GLIB_RUN_PROG' => 1, ++ 'AC_LIBTOOL_LANG_CXX_CONFIG' => 1, ++ 'AC_LIBTOOL_PROG_CC_C_O' => 1, ++ 'gl_PREREQ_ARGZ' => 1, ++ 'LT_SUPPORTED_TAG' => 1, ++ 'AM_OUTPUT_DEPENDENCY_COMMANDS' => 1, ++ 'LT_PROG_RC' => 1, ++ 'LT_SYS_MODULE_EXT' => 1, ++ 'AC_DEFUN_ONCE' => 1, ++ '_LT_AC_LANG_GCJ' => 1, ++ 'AC_LTDL_OBJDIR' => 1, ++ '_LT_PATH_TOOL_PREFIX' => 1, ++ 'AC_LIBTOOL_RC' => 1, ++ 'AC_DISABLE_FAST_INSTALL' => 1, ++ '_LT_AC_PROG_ECHO_BACKSLASH' => 1, ++ '_LT_AC_SYS_LIBPATH_AIX' => 1, ++ '_LT_AC_TRY_DLOPEN_SELF' => 1, ++ 'AC_TRY_X_COMPILE' => 1, ++ 'include' => 1, ++ 'LT_AC_PROG_SED' => 1, ++ 'AM_ENABLE_SHARED' => 1, ++ 'LTDL_INSTALLABLE' => 1, ++ '_LT_AC_LANG_GCJ_CONFIG' => 1, ++ 'AC_ENABLE_SHARED' => 1, ++ 'AC_ENABLE_STATIC' => 1, ++ 'AC_LIBTOOL_SYS_HARD_LINK_LOCKS' => 1, ++ 'AM_PROG_CC_C_O' => 1, ++ '_LT_AC_TAGVAR' => 1, ++ 'AC_LIBTOOL_LANG_F77_CONFIG' => 1, ++ 'AM_CONDITIONAL' => 1, ++ 'LT_LIB_DLLOAD' => 1, ++ 'LTDL_INIT' => 1, ++ 'LTVERSION_VERSION' => 1, ++ '_LT_PROG_CXX' => 1, ++ '_LT_PROG_F77' => 1, ++ 'AM_PROG_INSTALL_SH' => 1, ++ 'm4_include' => 1, ++ 'AC_PROG_EGREP' => 1, ++ '_AC_AM_CONFIG_HEADER_HOOK' => 1, ++ 'AC_PATH_MAGIC' => 1, ++ 'AC_LTDL_SYSSEARCHPATH' => 1, ++ 'GNOME_DOC_INIT' => 1, ++ 'AM_MAKE_INCLUDE' => 1, ++ 'LT_CMD_MAX_LEN' => 1, ++ '_LT_AC_TAGCONFIG' => 1, ++ 'm4_pattern_forbid' => 1, ++ '_LT_LINKER_OPTION' => 1, ++ 'AC_LIBTOOL_COMPILER_OPTION' => 1, ++ 'AC_DISABLE_SHARED' => 1, ++ '_LT_COMPILER_BOILERPLATE' => 1, ++ 'AC_LIBTOOL_WIN32_DLL' => 1, ++ 'AC_LIBTOOL_SETUP' => 1, ++ 'AM_GLIB_GNU_GETTEXT' => 1, ++ 'AC_PROG_LD_RELOAD_FLAG' => 1, ++ 'AC_LTDL_DLSYM_USCORE' => 1, ++ 'AM_MISSING_HAS_RUN' => 1, ++ 'LT_LANG' => 1, ++ 'LT_SYS_DLSEARCH_PATH' => 1, ++ 'LT_CONFIG_LTDL_DIR' => 1, ++ 'IT_PO_SUBDIR' => 1, ++ 'AC_LIBTOOL_DLOPEN_SELF' => 1, ++ 'LT_OUTPUT' => 1, ++ 'AC_LIBTOOL_PROG_LD_SHLIBS' => 1, ++ 'AC_CHECK_X_HEADER' => 1, ++ '_PKG_SHORT_ERRORS_SUPPORTED' => 1, ++ 'AC_WITH_LTDL' => 1, ++ 'AC_LIBTOOL_LINKER_OPTION' => 1, ++ 'PKG_CHECK_EXISTS' => 1, ++ 'LT_AC_PROG_RC' => 1, ++ 'AC_LIBTOOL_CXX' => 1, ++ 'LT_INIT' => 1, ++ 'LT_AC_PROG_GCJ' => 1, ++ 'LT_SYS_DLOPEN_SELF' => 1, ++ 'AM_DEP_TRACK' => 1, ++ 'AM_DISABLE_STATIC' => 1, ++ '_AC_PROG_LIBTOOL' => 1, ++ 'AM_CONFIG_HEADER' => 1, ++ '_AM_IF_OPTION' => 1, ++ 'AC_PATH_TOOL_PREFIX' => 1, ++ 'AC_LIBTOOL_F77' => 1, ++ 'm4_pattern_allow' => 1, ++ 'AM_SET_LEADING_DOT' => 1, ++ 'LT_AC_PROG_EGREP' => 1, ++ '_LT_PROG_FC' => 1, ++ '_AM_DEPENDENCIES' => 1, ++ 'AC_LIBTOOL_LANG_C_CONFIG' => 1, ++ 'LTOPTIONS_VERSION' => 1, ++ '_LT_AC_SYS_COMPILER' => 1, ++ 'AM_PROG_NM' => 1, ++ 'PKG_CHECK_MODULES' => 1, ++ 'AC_LIBLTDL_CONVENIENCE' => 1, ++ 'AC_DEPLIBS_CHECK_METHOD' => 1, ++ 'AM_SET_CURRENT_AUTOMAKE_VERSION' => 1, ++ 'AC_LIBLTDL_INSTALLABLE' => 1, ++ 'AC_LTDL_ENABLE_INSTALL' => 1, ++ 'AC_LIBTOOL_SYS_DYNAMIC_LINKER' => 1, ++ 'LT_PROG_GCJ' => 1, ++ 'AM_GLIB_DEFINE_LOCALEDIR' => 1, ++ 'AM_INIT_AUTOMAKE' => 1, ++ 'AC_CHECK_X_LIB' => 1, ++ 'AC_DISABLE_STATIC' => 1, ++ 'GNOME_CXX_WARNINGS' => 1, ++ 'GNOME_COMPILE_WARNINGS' => 1, ++ 'LT_PATH_NM' => 1, ++ 'AC_LTDL_SHLIBEXT' => 1, ++ '_LT_AC_LOCK' => 1, ++ '_LT_AC_LANG_RC_CONFIG' => 1, ++ 'LT_SYS_MODULE_PATH' => 1, ++ 'AC_LIBTOOL_POSTDEP_PREDEP' => 1, ++ 'LT_WITH_LTDL' => 1, ++ 'AC_LTDL_SHLIBPATH' => 1, ++ 'AC_PROG_INTLTOOL' => 1, ++ 'AM_AUX_DIR_EXPAND' => 1, ++ '_LT_AC_LANG_F77_CONFIG' => 1, ++ 'AC_LIBTOOL_PROG_COMPILER_NO_RTTI' => 1, ++ '_AM_SET_OPTIONS' => 1, ++ '_LT_COMPILER_OPTION' => 1, ++ '_AM_OUTPUT_DEPENDENCY_COMMANDS' => 1, ++ 'AM_RUN_LOG' => 1, ++ 'AC_LIBTOOL_PICMODE' => 1, ++ 'AC_LIBTOOL_SYS_OLD_ARCHIVE' => 1, ++ 'AC_LTDL_SYS_DLOPEN_DEPLIBS' => 1, ++ 'LT_PATH_LD' => 1, ++ 'AC_CHECK_LIBM' => 1, ++ 'AC_LIBTOOL_SYS_LIB_STRIP' => 1, ++ '_AM_MANGLE_OPTION' => 1, ++ 'AC_LTDL_SYMBOL_USCORE' => 1, ++ 'AC_LIBTOOL_SYS_MAX_CMD_LEN' => 1, ++ 'AM_SET_DEPDIR' => 1, ++ 'HANDLE_X_PATH_ARG' => 1, ++ '_LT_CC_BASENAME' => 1, ++ '_LT_LIBSOURCES' => 1, ++ 'PKG_PROG_PKG_CONFIG' => 1, ++ '_LT_LIBOBJ' => 1 ++ } ++ ], 'Autom4te::Request' ) ++ ); ++ +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/autom4te.cache/traces.0 gnome-power-manager-2.24.0.new/autom4te.cache/traces.0 +--- gnome-power-manager-2.24.0/autom4te.cache/traces.0 1970-01-01 01:00:00.000000000 +0100 ++++ gnome-power-manager-2.24.0.new/autom4te.cache/traces.0 2008-11-20 18:37:11.000000000 +0100 +@@ -0,0 +1,3246 @@ ++m4trace:/usr/share/aclocal/argz.m4:12: -1- AC_DEFUN([gl_FUNC_ARGZ], [gl_PREREQ_ARGZ ++ ++AC_CHECK_HEADERS([argz.h], [], [], [AC_INCLUDES_DEFAULT]) ++ ++AC_CHECK_TYPES([error_t], ++ [], ++ [AC_DEFINE([error_t], [int], ++ [Define to a type to use for `error_t' if it is not otherwise available.]) ++ AC_DEFINE([__error_t_defined], [1], [Define so that glibc/gnulib argp.h ++ does not typedef error_t.])], ++ [#if defined(HAVE_ARGZ_H) ++# include ++#endif]) ++ ++ARGZ_H= ++AC_CHECK_FUNCS([argz_add argz_append argz_count argz_create_sep argz_insert \ ++ argz_next argz_stringify], [], [ARGZ_H=argz.h; AC_LIBOBJ([argz])]) ++ ++dnl if have system argz functions, allow forced use of ++dnl libltdl-supplied implementation (and default to do so ++dnl on "known bad" systems). Could use a runtime check, but ++dnl (a) detecting malloc issues is notoriously unreliable ++dnl (b) only known system that declares argz functions, ++dnl provides them, yet they are broken, is cygwin ++dnl releases prior to 16-Mar-2007 (1.5.24 and earlier) ++dnl So, it's more straightforward simply to special case ++dnl this for known bad systems. ++AS_IF([test -z "$ARGZ_H"], ++ [AC_CACHE_CHECK( ++ [if argz actually works], ++ [lt_cv_sys_argz_works], ++ [[case $host_os in #( ++ *cygwin*) ++ lt_cv_sys_argz_works=no ++ if test "$cross_compiling" != no; then ++ lt_cv_sys_argz_works="guessing no" ++ else ++ lt_sed_extract_leading_digits='s/^\([0-9\.]*\).*/\1/' ++ save_IFS=$IFS ++ IFS=-. ++ set x `uname -r | sed -e "$lt_sed_extract_leading_digits"` ++ IFS=$save_IFS ++ lt_os_major=${2-0} ++ lt_os_minor=${3-0} ++ lt_os_micro=${4-0} ++ if test "$lt_os_major" -gt 1 \ ++ || { test "$lt_os_major" -eq 1 \ ++ && { test "$lt_os_minor" -gt 5 \ ++ || { test "$lt_os_minor" -eq 5 \ ++ && test "$lt_os_micro" -gt 24; }; }; }; then ++ lt_cv_sys_argz_works=yes ++ fi ++ fi ++ ;; #( ++ *) lt_cv_sys_argz_works=yes ;; ++ esac]]) ++ AS_IF([test $lt_cv_sys_argz_works = yes], ++ [AC_DEFINE([HAVE_WORKING_ARGZ], 1, ++ [This value is set to 1 to indicate that the system argz facility works])], ++ [ARGZ_H=argz.h ++ AC_LIBOBJ([argz])])]) ++ ++AC_SUBST([ARGZ_H]) ++]) ++m4trace:/usr/share/aclocal/argz.m4:79: -1- AC_DEFUN([gl_PREREQ_ARGZ], [:]) ++m4trace:/usr/share/aclocal/gconf-2.m4:8: -1- AC_DEFUN([AM_GCONF_SOURCE_2], [ ++ if test "x$GCONF_SCHEMA_INSTALL_SOURCE" = "x"; then ++ GCONF_SCHEMA_CONFIG_SOURCE=`gconftool-2 --get-default-source` ++ else ++ GCONF_SCHEMA_CONFIG_SOURCE=$GCONF_SCHEMA_INSTALL_SOURCE ++ fi ++ ++ AC_ARG_WITH([gconf-source], ++ AC_HELP_STRING([--with-gconf-source=sourceaddress], ++ [Config database for installing schema files.]), ++ [GCONF_SCHEMA_CONFIG_SOURCE="$withval"],) ++ ++ AC_SUBST(GCONF_SCHEMA_CONFIG_SOURCE) ++ AC_MSG_RESULT([Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation]) ++ ++ if test "x$GCONF_SCHEMA_FILE_DIR" = "x"; then ++ GCONF_SCHEMA_FILE_DIR='$(sysconfdir)/gconf/schemas' ++ fi ++ ++ AC_ARG_WITH([gconf-schema-file-dir], ++ AC_HELP_STRING([--with-gconf-schema-file-dir=dir], ++ [Directory for installing schema files.]), ++ [GCONF_SCHEMA_FILE_DIR="$withval"],) ++ ++ AC_SUBST(GCONF_SCHEMA_FILE_DIR) ++ AC_MSG_RESULT([Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files]) ++ ++ AC_ARG_ENABLE(schemas-install, ++ [ --disable-schemas-install Disable the schemas installation], ++ [case ${enableval} in ++ yes|no) ;; ++ *) AC_MSG_ERROR(bad value ${enableval} for --enable-schemas-install) ;; ++ esac]) ++ AM_CONDITIONAL([GCONF_SCHEMAS_INSTALL], [test "$enable_schemas_install" != no]) ++]) ++m4trace:/usr/share/aclocal/glib-gettext.m4:412: -1- AC_DEFUN([AM_GLIB_GNU_GETTEXT], [GLIB_GNU_GETTEXT($@)]) ++m4trace:/usr/share/aclocal/glib-gettext.m4:412: -1- AC_DEFUN([AM_GLIB_DEFINE_LOCALEDIR], [GLIB_DEFINE_LOCALEDIR($@)]) ++m4trace:/usr/share/aclocal/glib-gettext.m4:422: -1- AC_DEFUN([GLIB_RUN_PROG], [cat >conftest.foo <<_ACEOF ++$2 ++_ACEOF ++if AC_RUN_LOG([$1 conftest.foo]); then ++ m4_ifval([$3], [$3], [:]) ++m4_ifvaln([$4], [else $4])dnl ++echo "$as_me: failed input was:" >&AS_MESSAGE_LOG_FD ++sed 's/^/| /' conftest.foo >&AS_MESSAGE_LOG_FD ++fi]) ++m4trace:/usr/share/aclocal/gnome-compiler-flags.m4:4: -1- AC_DEFUN([GNOME_COMPILE_WARNINGS], [ ++ dnl ****************************** ++ dnl More compiler warnings ++ dnl ****************************** ++ ++ AC_ARG_ENABLE(compile-warnings, ++ AC_HELP_STRING([--enable-compile-warnings=@<:@no/minimum/yes/maximum/error@:>@], ++ [Turn on compiler warnings]),, ++ [enable_compile_warnings="m4_default([$1],[yes])"]) ++ ++ warnCFLAGS= ++ if test "x$GCC" != xyes; then ++ enable_compile_warnings=no ++ fi ++ ++ warning_flags= ++ realsave_CFLAGS="$CFLAGS" ++ ++ case "$enable_compile_warnings" in ++ no) ++ warning_flags= ++ ;; ++ minimum) ++ warning_flags="-Wall" ++ ;; ++ yes) ++ warning_flags="-Wall -Wmissing-prototypes" ++ ;; ++ maximum|error) ++ warning_flags="-Wall -Wmissing-prototypes -Wnested-externs -Wpointer-arith" ++ CFLAGS="$warning_flags $CFLAGS" ++ for option in -Wno-sign-compare; do ++ SAVE_CFLAGS="$CFLAGS" ++ CFLAGS="$CFLAGS $option" ++ AC_MSG_CHECKING([whether gcc understands $option]) ++ AC_TRY_COMPILE([], [], ++ has_option=yes, ++ has_option=no,) ++ CFLAGS="$SAVE_CFLAGS" ++ AC_MSG_RESULT($has_option) ++ if test $has_option = yes; then ++ warning_flags="$warning_flags $option" ++ fi ++ unset has_option ++ unset SAVE_CFLAGS ++ done ++ unset option ++ if test "$enable_compile_warnings" = "error" ; then ++ warning_flags="$warning_flags -Werror" ++ fi ++ ;; ++ *) ++ AC_MSG_ERROR(Unknown argument '$enable_compile_warnings' to --enable-compile-warnings) ++ ;; ++ esac ++ CFLAGS="$realsave_CFLAGS" ++ AC_MSG_CHECKING(what warning flags to pass to the C compiler) ++ AC_MSG_RESULT($warning_flags) ++ ++ AC_ARG_ENABLE(iso-c, ++ AC_HELP_STRING([--enable-iso-c], ++ [Try to warn if code is not ISO C ]),, ++ [enable_iso_c=no]) ++ ++ AC_MSG_CHECKING(what language compliance flags to pass to the C compiler) ++ complCFLAGS= ++ if test "x$enable_iso_c" != "xno"; then ++ if test "x$GCC" = "xyes"; then ++ case " $CFLAGS " in ++ *[\ \ ]-ansi[\ \ ]*) ;; ++ *) complCFLAGS="$complCFLAGS -ansi" ;; ++ esac ++ case " $CFLAGS " in ++ *[\ \ ]-pedantic[\ \ ]*) ;; ++ *) complCFLAGS="$complCFLAGS -pedantic" ;; ++ esac ++ fi ++ fi ++ AC_MSG_RESULT($complCFLAGS) ++ ++ WARN_CFLAGS="$warning_flags $complCFLAGS" ++ AC_SUBST(WARN_CFLAGS) ++]) ++m4trace:/usr/share/aclocal/gnome-compiler-flags.m4:90: -1- AC_DEFUN([GNOME_CXX_WARNINGS], [ ++ AC_ARG_ENABLE(cxx-warnings, ++ AC_HELP_STRING([--enable-cxx-warnings=@<:@no/minimum/yes@:>@] ++ [Turn on compiler warnings.]),, ++ [enable_cxx_warnings="m4_default([$1],[minimum])"]) ++ ++ AC_MSG_CHECKING(what warning flags to pass to the C++ compiler) ++ warnCXXFLAGS= ++ if test "x$GXX" != xyes; then ++ enable_cxx_warnings=no ++ fi ++ if test "x$enable_cxx_warnings" != "xno"; then ++ if test "x$GXX" = "xyes"; then ++ case " $CXXFLAGS " in ++ *[\ \ ]-Wall[\ \ ]*) ;; ++ *) warnCXXFLAGS="-Wall -Wno-unused" ;; ++ esac ++ ++ ## -W is not all that useful. And it cannot be controlled ++ ## with individual -Wno-xxx flags, unlike -Wall ++ if test "x$enable_cxx_warnings" = "xyes"; then ++ warnCXXFLAGS="$warnCXXFLAGS -Wshadow -Woverloaded-virtual" ++ fi ++ fi ++ fi ++ AC_MSG_RESULT($warnCXXFLAGS) ++ ++ AC_ARG_ENABLE(iso-cxx, ++ AC_HELP_STRING([--enable-iso-cxx], ++ [Try to warn if code is not ISO C++ ]),, ++ [enable_iso_cxx=no]) ++ ++ AC_MSG_CHECKING(what language compliance flags to pass to the C++ compiler) ++ complCXXFLAGS= ++ if test "x$enable_iso_cxx" != "xno"; then ++ if test "x$GXX" = "xyes"; then ++ case " $CXXFLAGS " in ++ *[\ \ ]-ansi[\ \ ]*) ;; ++ *) complCXXFLAGS="$complCXXFLAGS -ansi" ;; ++ esac ++ ++ case " $CXXFLAGS " in ++ *[\ \ ]-pedantic[\ \ ]*) ;; ++ *) complCXXFLAGS="$complCXXFLAGS -pedantic" ;; ++ esac ++ fi ++ fi ++ AC_MSG_RESULT($complCXXFLAGS) ++ ++ WARN_CXXFLAGS="$CXXFLAGS $warnCXXFLAGS $complCXXFLAGS" ++ AC_SUBST(WARN_CXXFLAGS) ++]) ++m4trace:/usr/share/aclocal/libtool.m4:67: -1- AC_DEFUN([LT_INIT], [AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT ++AC_BEFORE([$0], [LT_LANG])dnl ++AC_BEFORE([$0], [LT_OUTPUT])dnl ++AC_BEFORE([$0], [LTDL_INIT])dnl ++m4_require([_LT_CHECK_BUILDDIR])dnl ++ ++dnl Autoconf doesn't catch unexpanded LT_ macros by default: ++m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl ++m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl ++dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 ++dnl unless we require an AC_DEFUNed macro: ++AC_REQUIRE([LTOPTIONS_VERSION])dnl ++AC_REQUIRE([LTSUGAR_VERSION])dnl ++AC_REQUIRE([LTVERSION_VERSION])dnl ++AC_REQUIRE([LTOBSOLETE_VERSION])dnl ++m4_require([_LT_PROG_LTMAIN])dnl ++ ++dnl Parse OPTIONS ++_LT_SET_OPTIONS([$0], [$1]) ++ ++# This can be used to rebuild libtool when needed ++LIBTOOL_DEPS="$ltmain" ++ ++# Always use our own libtool. ++LIBTOOL='$(SHELL) $(top_builddir)/libtool' ++AC_SUBST(LIBTOOL)dnl ++ ++_LT_SETUP ++ ++# Only expand once: ++m4_define([LT_INIT]) ++]) ++m4trace:/usr/share/aclocal/libtool.m4:102: -1- AU_DEFUN([AC_PROG_LIBTOOL], [m4_if($#, 0, [LT_INIT], [LT_INIT($@)])]) ++m4trace:/usr/share/aclocal/libtool.m4:102: -1- AC_DEFUN([AC_PROG_LIBTOOL], [AC_DIAGNOSE([obsolete], [The macro `AC_PROG_LIBTOOL' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_INIT], [LT_INIT($@)])]) ++m4trace:/usr/share/aclocal/libtool.m4:103: -1- AU_DEFUN([AM_PROG_LIBTOOL], [m4_if($#, 0, [LT_INIT], [LT_INIT($@)])]) ++m4trace:/usr/share/aclocal/libtool.m4:103: -1- AC_DEFUN([AM_PROG_LIBTOOL], [AC_DIAGNOSE([obsolete], [The macro `AM_PROG_LIBTOOL' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_INIT], [LT_INIT($@)])]) ++m4trace:/usr/share/aclocal/libtool.m4:562: -1- AC_DEFUN([LT_OUTPUT], [: ${CONFIG_LT=./config.lt} ++AC_MSG_NOTICE([creating $CONFIG_LT]) ++cat >"$CONFIG_LT" <<_LTEOF ++#! $SHELL ++# Generated by $as_me. ++# Run this file to recreate a libtool stub with the current configuration. ++ ++lt_cl_silent=false ++SHELL=\${CONFIG_SHELL-$SHELL} ++_LTEOF ++ ++cat >>"$CONFIG_LT" <<\_LTEOF ++AS_SHELL_SANITIZE ++_AS_PREPARE ++ ++exec AS_MESSAGE_FD>&1 ++exec AS_MESSAGE_LOG_FD>>config.log ++{ ++ echo ++ AS_BOX([Running $as_me.]) ++} >&AS_MESSAGE_LOG_FD ++ ++lt_cl_help="\ ++\`$as_me' creates a local libtool stub from the current configuration, ++for use in further configure time tests before the real libtool is ++generated. ++ ++Usage: $[0] [[OPTIONS]] ++ ++ -h, --help print this help, then exit ++ -V, --version print version number, then exit ++ -q, --quiet do not print progress messages ++ -d, --debug don't remove temporary files ++ ++Report bugs to ." ++ ++lt_cl_version="\ ++m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl ++m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) ++configured by $[0], generated by m4_PACKAGE_STRING. ++ ++Copyright (C) 2008 Free Software Foundation, Inc. ++This config.lt script is free software; the Free Software Foundation ++gives unlimited permision to copy, distribute and modify it." ++ ++while test $[#] != 0 ++do ++ case $[1] in ++ --version | --v* | -V ) ++ echo "$lt_cl_version"; exit 0 ;; ++ --help | --h* | -h ) ++ echo "$lt_cl_help"; exit 0 ;; ++ --debug | --d* | -d ) ++ debug=: ;; ++ --quiet | --q* | --silent | --s* | -q ) ++ lt_cl_silent=: ;; ++ ++ -*) AC_MSG_ERROR([unrecognized option: $[1] ++Try \`$[0] --help' for more information.]) ;; ++ ++ *) AC_MSG_ERROR([unrecognized argument: $[1] ++Try \`$[0] --help' for more information.]) ;; ++ esac ++ shift ++done ++ ++if $lt_cl_silent; then ++ exec AS_MESSAGE_FD>/dev/null ++fi ++_LTEOF ++ ++cat >>"$CONFIG_LT" <<_LTEOF ++_LT_OUTPUT_LIBTOOL_COMMANDS_INIT ++_LTEOF ++ ++cat >>"$CONFIG_LT" <<\_LTEOF ++AC_MSG_NOTICE([creating $ofile]) ++_LT_OUTPUT_LIBTOOL_COMMANDS ++AS_EXIT(0) ++_LTEOF ++chmod +x "$CONFIG_LT" ++ ++# configure is writing to config.log, but config.lt does its own redirection, ++# appending to config.log, which fails on DOS, as config.log is still kept ++# open by configure. Here we exec the FD to /dev/null, effectively closing ++# config.log, so it can be properly (re)opened and appended to by config.lt. ++if test "$no_create" != yes; then ++ lt_cl_success=: ++ test "$silent" = yes && ++ lt_config_lt_args="$lt_config_lt_args --quiet" ++ exec AS_MESSAGE_LOG_FD>/dev/null ++ $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false ++ exec AS_MESSAGE_LOG_FD>>config.log ++ $lt_cl_success || AS_EXIT(1) ++fi ++]) ++m4trace:/usr/share/aclocal/libtool.m4:757: -1- AC_DEFUN([LT_SUPPORTED_TAG], []) ++m4trace:/usr/share/aclocal/libtool.m4:768: -1- AC_DEFUN([LT_LANG], [AC_BEFORE([$0], [LT_OUTPUT])dnl ++m4_case([$1], ++ [C], [_LT_LANG(C)], ++ [C++], [_LT_LANG(CXX)], ++ [Java], [_LT_LANG(GCJ)], ++ [Fortran 77], [_LT_LANG(F77)], ++ [Fortran], [_LT_LANG(FC)], ++ [Windows Resource], [_LT_LANG(RC)], ++ [m4_ifdef([_LT_LANG_]$1[_CONFIG], ++ [_LT_LANG($1)], ++ [m4_fatal([$0: unsupported language: "$1"])])])dnl ++]) ++m4trace:/usr/share/aclocal/libtool.m4:830: -1- AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) ++m4trace:/usr/share/aclocal/libtool.m4:830: -1- AC_DEFUN([AC_LIBTOOL_CXX], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_CXX' is obsolete. ++You should run autoupdate.])dnl ++LT_LANG(C++)]) ++m4trace:/usr/share/aclocal/libtool.m4:831: -1- AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) ++m4trace:/usr/share/aclocal/libtool.m4:831: -1- AC_DEFUN([AC_LIBTOOL_F77], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_F77' is obsolete. ++You should run autoupdate.])dnl ++LT_LANG(Fortran 77)]) ++m4trace:/usr/share/aclocal/libtool.m4:832: -1- AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) ++m4trace:/usr/share/aclocal/libtool.m4:832: -1- AC_DEFUN([AC_LIBTOOL_FC], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_FC' is obsolete. ++You should run autoupdate.])dnl ++LT_LANG(Fortran)]) ++m4trace:/usr/share/aclocal/libtool.m4:833: -1- AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) ++m4trace:/usr/share/aclocal/libtool.m4:833: -1- AC_DEFUN([AC_LIBTOOL_GCJ], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_GCJ' is obsolete. ++You should run autoupdate.])dnl ++LT_LANG(Java)]) ++m4trace:/usr/share/aclocal/libtool.m4:1398: -1- AC_DEFUN([_LT_COMPILER_OPTION], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_DECL_SED])dnl ++AC_CACHE_CHECK([$1], [$2], ++ [$2=no ++ m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="$3" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&AS_MESSAGE_LOG_FD ++ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ $2=yes ++ fi ++ fi ++ $RM conftest* ++]) ++ ++if test x"[$]$2" = xyes; then ++ m4_if([$5], , :, [$5]) ++else ++ m4_if([$6], , :, [$6]) ++fi ++]) ++m4trace:/usr/share/aclocal/libtool.m4:1440: -1- AU_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [m4_if($#, 0, [_LT_COMPILER_OPTION], [_LT_COMPILER_OPTION($@)])]) ++m4trace:/usr/share/aclocal/libtool.m4:1440: -1- AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_COMPILER_OPTION' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [_LT_COMPILER_OPTION], [_LT_COMPILER_OPTION($@)])]) ++m4trace:/usr/share/aclocal/libtool.m4:1449: -1- AC_DEFUN([_LT_LINKER_OPTION], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_DECL_SED])dnl ++AC_CACHE_CHECK([$1], [$2], ++ [$2=no ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS $3" ++ echo "$lt_simple_link_test_code" > conftest.$ac_ext ++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then ++ # The linker can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ if test -s conftest.err; then ++ # Append any errors to the config.log. ++ cat conftest.err 1>&AS_MESSAGE_LOG_FD ++ $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if diff conftest.exp conftest.er2 >/dev/null; then ++ $2=yes ++ fi ++ else ++ $2=yes ++ fi ++ fi ++ $RM -r conftest* ++ LDFLAGS="$save_LDFLAGS" ++]) ++ ++if test x"[$]$2" = xyes; then ++ m4_if([$4], , :, [$4]) ++else ++ m4_if([$5], , :, [$5]) ++fi ++]) ++m4trace:/usr/share/aclocal/libtool.m4:1484: -1- AU_DEFUN([AC_LIBTOOL_LINKER_OPTION], [m4_if($#, 0, [_LT_LINKER_OPTION], [_LT_LINKER_OPTION($@)])]) ++m4trace:/usr/share/aclocal/libtool.m4:1484: -1- AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_LINKER_OPTION' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [_LT_LINKER_OPTION], [_LT_LINKER_OPTION($@)])]) ++m4trace:/usr/share/aclocal/libtool.m4:1491: -1- AC_DEFUN([LT_CMD_MAX_LEN], [AC_REQUIRE([AC_CANONICAL_HOST])dnl ++# find the maximum length of command line arguments ++AC_MSG_CHECKING([the maximum length of command line arguments]) ++AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl ++ i=0 ++ teststring="ABCD" ++ ++ case $build_os in ++ msdosdjgpp*) ++ # On DJGPP, this test can blow up pretty badly due to problems in libc ++ # (any single argument exceeding 2000 bytes causes a buffer overrun ++ # during glob expansion). Even if it were fixed, the result of this ++ # check would be larger than it should be. ++ lt_cv_sys_max_cmd_len=12288; # 12K is about right ++ ;; ++ ++ gnu*) ++ # Under GNU Hurd, this test is not required because there is ++ # no limit to the length of command line arguments. ++ # Libtool will interpret -1 as no limit whatsoever ++ lt_cv_sys_max_cmd_len=-1; ++ ;; ++ ++ cygwin* | mingw*) ++ # On Win9x/ME, this test blows up -- it succeeds, but takes ++ # about 5 minutes as the teststring grows exponentially. ++ # Worse, since 9x/ME are not pre-emptively multitasking, ++ # you end up with a "frozen" computer, even though with patience ++ # the test eventually succeeds (with a max line length of 256k). ++ # Instead, let's just punt: use the minimum linelength reported by ++ # all of the supported platforms: 8192 (on NT/2K/XP). ++ lt_cv_sys_max_cmd_len=8192; ++ ;; ++ ++ amigaos*) ++ # On AmigaOS with pdksh, this test takes hours, literally. ++ # So we just punt and use a minimum line length of 8192. ++ lt_cv_sys_max_cmd_len=8192; ++ ;; ++ ++ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) ++ # This has been around since 386BSD, at least. Likely further. ++ if test -x /sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` ++ elif test -x /usr/sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` ++ else ++ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs ++ fi ++ # And add a safety zone ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ ;; ++ ++ interix*) ++ # We know the value 262144 and hardcode it with a safety zone (like BSD) ++ lt_cv_sys_max_cmd_len=196608 ++ ;; ++ ++ osf*) ++ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure ++ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not ++ # nice to cause kernel panics so lets avoid the loop below. ++ # First set a reasonable default. ++ lt_cv_sys_max_cmd_len=16384 ++ # ++ if test -x /sbin/sysconfig; then ++ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in ++ *1*) lt_cv_sys_max_cmd_len=-1 ;; ++ esac ++ fi ++ ;; ++ sco3.2v5*) ++ lt_cv_sys_max_cmd_len=102400 ++ ;; ++ sysv5* | sco5v6* | sysv4.2uw2*) ++ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` ++ if test -n "$kargmax"; then ++ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` ++ else ++ lt_cv_sys_max_cmd_len=32768 ++ fi ++ ;; ++ *) ++ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` ++ if test -n "$lt_cv_sys_max_cmd_len"; then ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ else ++ # Make teststring a little bigger before we do anything with it. ++ # a 1K string should be a reasonable start. ++ for i in 1 2 3 4 5 6 7 8 ; do ++ teststring=$teststring$teststring ++ done ++ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} ++ # If test is not a shell built-in, we'll probably end up computing a ++ # maximum length that is only half of the actual maximum length, but ++ # we can't tell. ++ while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ ++ = "XX$teststring$teststring"; } >/dev/null 2>&1 && ++ test $i != 17 # 1/2 MB should be enough ++ do ++ i=`expr $i + 1` ++ teststring=$teststring$teststring ++ done ++ # Only check the string length outside the loop. ++ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` ++ teststring= ++ # Add a significant safety factor because C++ compilers can tack on ++ # massive amounts of additional arguments before passing them to the ++ # linker. It appears as though 1/2 is a usable value. ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` ++ fi ++ ;; ++ esac ++]) ++if test -n $lt_cv_sys_max_cmd_len ; then ++ AC_MSG_RESULT($lt_cv_sys_max_cmd_len) ++else ++ AC_MSG_RESULT(none) ++fi ++max_cmd_len=$lt_cv_sys_max_cmd_len ++_LT_DECL([], [max_cmd_len], [0], ++ [What is the maximum length of a command?]) ++]) ++m4trace:/usr/share/aclocal/libtool.m4:1619: -1- AU_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [m4_if($#, 0, [LT_CMD_MAX_LEN], [LT_CMD_MAX_LEN($@)])]) ++m4trace:/usr/share/aclocal/libtool.m4:1619: -1- AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_SYS_MAX_CMD_LEN' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_CMD_MAX_LEN], [LT_CMD_MAX_LEN($@)])]) ++m4trace:/usr/share/aclocal/libtool.m4:1724: -1- AC_DEFUN([LT_SYS_DLOPEN_SELF], [m4_require([_LT_HEADER_DLFCN])dnl ++if test "x$enable_dlopen" != xyes; then ++ enable_dlopen=unknown ++ enable_dlopen_self=unknown ++ enable_dlopen_self_static=unknown ++else ++ lt_cv_dlopen=no ++ lt_cv_dlopen_libs= ++ ++ case $host_os in ++ beos*) ++ lt_cv_dlopen="load_add_on" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes ++ ;; ++ ++ mingw* | pw32*) ++ lt_cv_dlopen="LoadLibrary" ++ lt_cv_dlopen_libs= ++ ;; ++ ++ cygwin*) ++ lt_cv_dlopen="dlopen" ++ lt_cv_dlopen_libs= ++ ;; ++ ++ darwin*) ++ # if libdl is installed we need to link against it ++ AC_CHECK_LIB([dl], [dlopen], ++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ ++ lt_cv_dlopen="dyld" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes ++ ]) ++ ;; ++ ++ *) ++ AC_CHECK_FUNC([shl_load], ++ [lt_cv_dlopen="shl_load"], ++ [AC_CHECK_LIB([dld], [shl_load], ++ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], ++ [AC_CHECK_FUNC([dlopen], ++ [lt_cv_dlopen="dlopen"], ++ [AC_CHECK_LIB([dl], [dlopen], ++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], ++ [AC_CHECK_LIB([svld], [dlopen], ++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], ++ [AC_CHECK_LIB([dld], [dld_link], ++ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) ++ ]) ++ ]) ++ ]) ++ ]) ++ ]) ++ ;; ++ esac ++ ++ if test "x$lt_cv_dlopen" != xno; then ++ enable_dlopen=yes ++ else ++ enable_dlopen=no ++ fi ++ ++ case $lt_cv_dlopen in ++ dlopen) ++ save_CPPFLAGS="$CPPFLAGS" ++ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" ++ ++ save_LDFLAGS="$LDFLAGS" ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" ++ ++ save_LIBS="$LIBS" ++ LIBS="$lt_cv_dlopen_libs $LIBS" ++ ++ AC_CACHE_CHECK([whether a program can dlopen itself], ++ lt_cv_dlopen_self, [dnl ++ _LT_TRY_DLOPEN_SELF( ++ lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, ++ lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) ++ ]) ++ ++ if test "x$lt_cv_dlopen_self" = xyes; then ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" ++ AC_CACHE_CHECK([whether a statically linked program can dlopen itself], ++ lt_cv_dlopen_self_static, [dnl ++ _LT_TRY_DLOPEN_SELF( ++ lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, ++ lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) ++ ]) ++ fi ++ ++ CPPFLAGS="$save_CPPFLAGS" ++ LDFLAGS="$save_LDFLAGS" ++ LIBS="$save_LIBS" ++ ;; ++ esac ++ ++ case $lt_cv_dlopen_self in ++ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; ++ *) enable_dlopen_self=unknown ;; ++ esac ++ ++ case $lt_cv_dlopen_self_static in ++ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; ++ *) enable_dlopen_self_static=unknown ;; ++ esac ++fi ++_LT_DECL([dlopen_support], [enable_dlopen], [0], ++ [Whether dlopen is supported]) ++_LT_DECL([dlopen_self], [enable_dlopen_self], [0], ++ [Whether dlopen of programs is supported]) ++_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], ++ [Whether dlopen of statically linked programs is supported]) ++]) ++m4trace:/usr/share/aclocal/libtool.m4:1841: -1- AU_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [m4_if($#, 0, [LT_SYS_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF($@)])]) ++m4trace:/usr/share/aclocal/libtool.m4:1841: -1- AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_DLOPEN_SELF' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_SYS_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF($@)])]) ++m4trace:/usr/share/aclocal/libtool.m4:2740: -1- AC_DEFUN([_LT_PATH_TOOL_PREFIX], [m4_require([_LT_DECL_EGREP])dnl ++AC_MSG_CHECKING([for $1]) ++AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, ++[case $MAGIC_CMD in ++[[\\/*] | ?:[\\/]*]) ++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ++ ;; ++*) ++ lt_save_MAGIC_CMD="$MAGIC_CMD" ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++dnl $ac_dummy forces splitting on constant user-supplied paths. ++dnl POSIX.2 word splitting is done only on the output of word expansions, ++dnl not every word. This closes a longstanding sh security hole. ++ ac_dummy="m4_if([$2], , $PATH, [$2])" ++ for ac_dir in $ac_dummy; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$1; then ++ lt_cv_path_MAGIC_CMD="$ac_dir/$1" ++ if test -n "$file_magic_test_file"; then ++ case $deplibs_check_method in ++ "file_magic "*) ++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` ++ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | ++ $EGREP "$file_magic_regex" > /dev/null; then ++ : ++ else ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: the command libtool uses to detect shared libraries, ++*** $file_magic_cmd, produces output that libtool cannot recognize. ++*** The result is that libtool may fail to recognize shared libraries ++*** as such. This will affect the creation of libtool libraries that ++*** depend on shared libraries, but programs linked with such libtool ++*** libraries will work regardless of this problem. Nevertheless, you ++*** may want to report the problem to your system manager and/or to ++*** bug-libtool@gnu.org ++ ++_LT_EOF ++ fi ;; ++ esac ++ fi ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" ++ MAGIC_CMD="$lt_save_MAGIC_CMD" ++ ;; ++esac]) ++MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++if test -n "$MAGIC_CMD"; then ++ AC_MSG_RESULT($MAGIC_CMD) ++else ++ AC_MSG_RESULT(no) ++fi ++_LT_DECL([], [MAGIC_CMD], [0], ++ [Used to examine libraries when file_magic_cmd begins with "file"])dnl ++]) ++m4trace:/usr/share/aclocal/libtool.m4:2802: -1- AU_DEFUN([AC_PATH_TOOL_PREFIX], [m4_if($#, 0, [_LT_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX($@)])]) ++m4trace:/usr/share/aclocal/libtool.m4:2802: -1- AC_DEFUN([AC_PATH_TOOL_PREFIX], [AC_DIAGNOSE([obsolete], [The macro `AC_PATH_TOOL_PREFIX' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [_LT_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX($@)])]) ++m4trace:/usr/share/aclocal/libtool.m4:2825: -1- AC_DEFUN([LT_PATH_LD], [AC_REQUIRE([AC_PROG_CC])dnl ++AC_REQUIRE([AC_CANONICAL_HOST])dnl ++AC_REQUIRE([AC_CANONICAL_BUILD])dnl ++m4_require([_LT_DECL_SED])dnl ++m4_require([_LT_DECL_EGREP])dnl ++ ++AC_ARG_WITH([gnu-ld], ++ [AS_HELP_STRING([--with-gnu-ld], ++ [assume the C compiler uses GNU ld @<:@default=no@:>@])], ++ [test "$withval" = no || with_gnu_ld=yes], ++ [with_gnu_ld=no])dnl ++ ++ac_prog=ld ++if test "$GCC" = yes; then ++ # Check if gcc -print-prog-name=ld gives a path. ++ AC_MSG_CHECKING([for ld used by $CC]) ++ case $host in ++ *-*-mingw*) ++ # gcc leaves a trailing carriage return which upsets mingw ++ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; ++ *) ++ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; ++ esac ++ case $ac_prog in ++ # Accept absolute paths. ++ [[\\/]]* | ?:[[\\/]]*) ++ re_direlt='/[[^/]][[^/]]*/\.\./' ++ # Canonicalize the pathname of ld ++ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` ++ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ++ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` ++ done ++ test -z "$LD" && LD="$ac_prog" ++ ;; ++ "") ++ # If it fails, then pretend we aren't using GCC. ++ ac_prog=ld ++ ;; ++ *) ++ # If it is relative, then search for the first ld in PATH. ++ with_gnu_ld=unknown ++ ;; ++ esac ++elif test "$with_gnu_ld" = yes; then ++ AC_MSG_CHECKING([for GNU ld]) ++else ++ AC_MSG_CHECKING([for non-GNU ld]) ++fi ++AC_CACHE_VAL(lt_cv_path_LD, ++[if test -z "$LD"; then ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then ++ lt_cv_path_LD="$ac_dir/$ac_prog" ++ # Check to see if the program is GNU ld. I'd rather use --version, ++ # but apparently some variants of GNU ld only accept -v. ++ # Break only if it was the GNU/non-GNU ld that we prefer. ++ case `"$lt_cv_path_LD" -v 2>&1 &1 | sed '1q'` in ++ */dev/null* | *'Invalid file or object type'*) ++ lt_cv_path_NM="$tmp_nm -B" ++ break ++ ;; ++ *) ++ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in ++ */dev/null*) ++ lt_cv_path_NM="$tmp_nm -p" ++ break ++ ;; ++ *) ++ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but ++ continue # so that we can try to find one that supports BSD flags ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ done ++ IFS="$lt_save_ifs" ++ done ++ : ${lt_cv_path_NM=no} ++fi]) ++if test "$lt_cv_path_NM" != "no"; then ++ NM="$lt_cv_path_NM" ++else ++ # Didn't find any BSD compatible name lister, look for dumpbin. ++ AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :) ++ AC_SUBST([DUMPBIN]) ++ if test "$DUMPBIN" != ":"; then ++ NM="$DUMPBIN" ++ fi ++fi ++test -z "$NM" && NM=nm ++AC_SUBST([NM]) ++_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl ++ ++AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], ++ [lt_cv_nm_interface="BSD nm" ++ echo "int some_variable = 0;" > conftest.$ac_ext ++ (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD) ++ (eval "$ac_compile" 2>conftest.err) ++ cat conftest.err >&AS_MESSAGE_LOG_FD ++ (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) ++ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) ++ cat conftest.err >&AS_MESSAGE_LOG_FD ++ (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD) ++ cat conftest.out >&AS_MESSAGE_LOG_FD ++ if $GREP 'External.*some_variable' conftest.out > /dev/null; then ++ lt_cv_nm_interface="MS dumpbin" ++ fi ++ rm -f conftest*]) ++]) ++m4trace:/usr/share/aclocal/libtool.m4:3249: -1- AU_DEFUN([AM_PROG_NM], [m4_if($#, 0, [LT_PATH_NM], [LT_PATH_NM($@)])]) ++m4trace:/usr/share/aclocal/libtool.m4:3249: -1- AC_DEFUN([AM_PROG_NM], [AC_DIAGNOSE([obsolete], [The macro `AM_PROG_NM' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_PATH_NM], [LT_PATH_NM($@)])]) ++m4trace:/usr/share/aclocal/libtool.m4:3250: -1- AU_DEFUN([AC_PROG_NM], [m4_if($#, 0, [LT_PATH_NM], [LT_PATH_NM($@)])]) ++m4trace:/usr/share/aclocal/libtool.m4:3250: -1- AC_DEFUN([AC_PROG_NM], [AC_DIAGNOSE([obsolete], [The macro `AC_PROG_NM' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_PATH_NM], [LT_PATH_NM($@)])]) ++m4trace:/usr/share/aclocal/libtool.m4:3259: -1- AC_DEFUN([LT_LIB_M], [AC_REQUIRE([AC_CANONICAL_HOST])dnl ++LIBM= ++case $host in ++*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) ++ # These system don't have libm, or don't need it ++ ;; ++*-ncr-sysv4.3*) ++ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") ++ AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") ++ ;; ++*) ++ AC_CHECK_LIB(m, cos, LIBM="-lm") ++ ;; ++esac ++AC_SUBST([LIBM]) ++]) ++m4trace:/usr/share/aclocal/libtool.m4:3278: -1- AU_DEFUN([AC_CHECK_LIBM], [m4_if($#, 0, [LT_LIB_M], [LT_LIB_M($@)])]) ++m4trace:/usr/share/aclocal/libtool.m4:3278: -1- AC_DEFUN([AC_CHECK_LIBM], [AC_DIAGNOSE([obsolete], [The macro `AC_CHECK_LIBM' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_LIB_M], [LT_LIB_M($@)])]) ++m4trace:/usr/share/aclocal/libtool.m4:6947: -1- AC_DEFUN([LT_PROG_GCJ], [m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], ++ [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], ++ [AC_CHECK_TOOL(GCJ, gcj,) ++ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" ++ AC_SUBST(GCJFLAGS)])])[]dnl ++]) ++m4trace:/usr/share/aclocal/libtool.m4:6956: -1- AU_DEFUN([LT_AC_PROG_GCJ], [m4_if($#, 0, [LT_PROG_GCJ], [LT_PROG_GCJ($@)])]) ++m4trace:/usr/share/aclocal/libtool.m4:6956: -1- AC_DEFUN([LT_AC_PROG_GCJ], [AC_DIAGNOSE([obsolete], [The macro `LT_AC_PROG_GCJ' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_PROG_GCJ], [LT_PROG_GCJ($@)])]) ++m4trace:/usr/share/aclocal/libtool.m4:6963: -1- AC_DEFUN([LT_PROG_RC], [AC_CHECK_TOOL(RC, windres,) ++]) ++m4trace:/usr/share/aclocal/libtool.m4:6968: -1- AU_DEFUN([LT_AC_PROG_RC], [m4_if($#, 0, [LT_PROG_RC], [LT_PROG_RC($@)])]) ++m4trace:/usr/share/aclocal/libtool.m4:6968: -1- AC_DEFUN([LT_AC_PROG_RC], [AC_DIAGNOSE([obsolete], [The macro `LT_AC_PROG_RC' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_PROG_RC], [LT_PROG_RC($@)])]) ++m4trace:/usr/share/aclocal/libtool.m4:7067: -1- AU_DEFUN([LT_AC_PROG_SED], [m4_if($#, 0, [AC_PROG_SED], [AC_PROG_SED($@)])]) ++m4trace:/usr/share/aclocal/libtool.m4:7067: -1- AC_DEFUN([LT_AC_PROG_SED], [AC_DIAGNOSE([obsolete], [The macro `LT_AC_PROG_SED' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [AC_PROG_SED], [AC_PROG_SED($@)])]) ++m4trace:/usr/share/aclocal/ltdl.m4:16: -1- AC_DEFUN([LT_CONFIG_LTDL_DIR], [AC_BEFORE([$0], [LTDL_INIT]) ++_$0($*) ++]) ++m4trace:/usr/share/aclocal/ltdl.m4:68: -1- AC_DEFUN([LTDL_CONVENIENCE], [AC_BEFORE([$0], [LTDL_INIT])dnl ++dnl Although the argument is deprecated and no longer documented, ++dnl LTDL_CONVENIENCE used to take a DIRECTORY orgument, if we have one ++dnl here make sure it is the same as any other declaration of libltdl's ++dnl location! This also ensures lt_ltdl_dir is set when configure.ac is ++dnl not yet using an explicit LT_CONFIG_LTDL_DIR. ++m4_ifval([$1], [_LT_CONFIG_LTDL_DIR([$1])])dnl ++_$0() ++]) ++m4trace:/usr/share/aclocal/ltdl.m4:81: -1- AU_DEFUN([AC_LIBLTDL_CONVENIENCE], [_LT_CONFIG_LTDL_DIR([m4_default([$1], [libltdl])]) ++_LTDL_CONVENIENCE]) ++m4trace:/usr/share/aclocal/ltdl.m4:81: -1- AC_DEFUN([AC_LIBLTDL_CONVENIENCE], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBLTDL_CONVENIENCE' is obsolete. ++You should run autoupdate.])dnl ++_LT_CONFIG_LTDL_DIR([m4_default([$1], [libltdl])]) ++_LTDL_CONVENIENCE]) ++m4trace:/usr/share/aclocal/ltdl.m4:124: -1- AC_DEFUN([LTDL_INSTALLABLE], [AC_BEFORE([$0], [LTDL_INIT])dnl ++dnl Although the argument is deprecated and no longer documented, ++dnl LTDL_INSTALLABLE used to take a DIRECTORY orgument, if we have one ++dnl here make sure it is the same as any other declaration of libltdl's ++dnl location! This also ensures lt_ltdl_dir is set when configure.ac is ++dnl not yet using an explicit LT_CONFIG_LTDL_DIR. ++m4_ifval([$1], [_LT_CONFIG_LTDL_DIR([$1])])dnl ++_$0() ++]) ++m4trace:/usr/share/aclocal/ltdl.m4:137: -1- AU_DEFUN([AC_LIBLTDL_INSTALLABLE], [_LT_CONFIG_LTDL_DIR([m4_default([$1], [libltdl])]) ++_LTDL_INSTALLABLE]) ++m4trace:/usr/share/aclocal/ltdl.m4:137: -1- AC_DEFUN([AC_LIBLTDL_INSTALLABLE], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBLTDL_INSTALLABLE' is obsolete. ++You should run autoupdate.])dnl ++_LT_CONFIG_LTDL_DIR([m4_default([$1], [libltdl])]) ++_LTDL_INSTALLABLE]) ++m4trace:/usr/share/aclocal/ltdl.m4:213: -1- AC_DEFUN([_LT_LIBOBJ], [ ++ m4_pattern_allow([^_LT_LIBOBJS$]) ++ AS_LITERAL_IF([$1], [_LT_LIBSOURCES([$1.c])])dnl ++ _LT_LIBOBJS="$_LT_LIBOBJS $1.$ac_objext" ++]) ++m4trace:/usr/share/aclocal/ltdl.m4:224: -1- AC_DEFUN([_LT_LIBSOURCES], [ ++ m4_foreach([_LTNAME], [$1], [ ++ m4_syscmd([test -r "$lt_libobj_prefix]_LTNAME[" || ++ test -z "$lt_libobj_prefix" || ++ test ! -d "$lt_libobj_prefix"])dnl ++ m4_if(m4_sysval, [0], [], ++ [AC_FATAL([missing $lt_libobj_prefix/]_LTNAME)]) ++ ]) ++]) ++m4trace:/usr/share/aclocal/ltdl.m4:242: -1- AC_DEFUN([LTDL_INIT], [dnl Parse OPTIONS ++_LT_SET_OPTIONS([$0], [$1]) ++ ++dnl We need to keep our own list of libobjs separate from our parent project, ++dnl and the easiest way to do that is redefine the AC_LIBOBJs macro while ++dnl we look for our own LIBOBJs. Definitions in ltdl-libobj.m4. ++m4_pushdef([AC_LIBOBJ], m4_defn([_LT_LIBOBJ])) ++m4_pushdef([AC_LIBSOURCES], m4_defn([_LT_LIBSOURCES])) ++ ++dnl If not otherwise defined, default to the 1.5.x compatible subproject mode: ++m4_if(_LTDL_MODE, [], ++ [m4_define([_LTDL_MODE], m4_default([$2], [subproject])) ++ m4_if([-1], [m4_bregexp(_LTDL_MODE, [\(subproject\|\(non\)?recursive\)])], ++ [m4_fatal([unknown libltdl mode: ]_LTDL_MODE)])]) ++ ++AC_ARG_WITH([included_ltdl], ++ [AS_HELP_STRING([--with-included-ltdl], ++ [use the GNU ltdl sources included here])]) ++ ++if test "x$with_included_ltdl" != xyes; then ++ # We are not being forced to use the included libltdl sources, so ++ # decide whether there is a useful installed version we can use. ++ AC_CHECK_HEADER([ltdl.h], ++ [AC_CHECK_DECL([lt_dlinterface_register], ++ [AC_CHECK_LIB([ltdl], [lt_dlinterface_register], ++ [with_included_ltdl=no], ++ [with_included_ltdl=yes])], ++ [with_included_ltdl=yes], ++ [AC_INCLUDES_DEFAULT ++ #include ])], ++ [with_included_ltdl=yes], ++ [AC_INCLUDES_DEFAULT] ++ ) ++fi ++ ++dnl If neither LT_CONFIG_LTDL_DIR, LTDL_CONVENIENCE nor LTDL_INSTALLABLE ++dnl was called yet, then for old times' sake, we assume libltdl is in an ++dnl eponymous directory: ++AC_PROVIDE_IFELSE([LT_CONFIG_LTDL_DIR], [], [_LT_CONFIG_LTDL_DIR([libltdl])]) ++ ++AC_ARG_WITH([ltdl_include], ++ [AS_HELP_STRING([--with-ltdl-include=DIR], ++ [use the ltdl headers installed in DIR])]) ++ ++if test -n "$with_ltdl_include"; then ++ if test -f "$with_ltdl_include/ltdl.h"; then : ++ else ++ AC_MSG_ERROR([invalid ltdl include directory: `$with_ltdl_include']) ++ fi ++else ++ with_ltdl_include=no ++fi ++ ++AC_ARG_WITH([ltdl_lib], ++ [AS_HELP_STRING([--with-ltdl-lib=DIR], ++ [use the libltdl.la installed in DIR])]) ++ ++if test -n "$with_ltdl_lib"; then ++ if test -f "$with_ltdl_lib/libltdl.la"; then : ++ else ++ AC_MSG_ERROR([invalid ltdl library directory: `$with_ltdl_lib']) ++ fi ++else ++ with_ltdl_lib=no ++fi ++ ++case ,$with_included_ltdl,$with_ltdl_include,$with_ltdl_lib, in ++ ,yes,no,no,) ++ m4_case(m4_default(_LTDL_TYPE, [convenience]), ++ [convenience], [_LTDL_CONVENIENCE], ++ [installable], [_LTDL_INSTALLABLE], ++ [m4_fatal([unknown libltdl build type: ]_LTDL_TYPE)]) ++ ;; ++ ,no,no,no,) ++ # If the included ltdl is not to be used, then use the ++ # preinstalled libltdl we found. ++ AC_DEFINE([HAVE_LTDL], [1], ++ [Define this if a modern libltdl is already installed]) ++ LIBLTDL=-lltdl ++ LTDLDEPS= ++ LTDLINCL= ++ ;; ++ ,no*,no,*) ++ AC_MSG_ERROR([`--with-ltdl-include' and `--with-ltdl-lib' options must be used together]) ++ ;; ++ *) with_included_ltdl=no ++ LIBLTDL="-L$with_ltdl_lib -lltdl" ++ LTDLDEPS= ++ LTDLINCL="-I$with_ltdl_include" ++ ;; ++esac ++INCLTDL="$LTDLINCL" ++ ++# Report our decision... ++AC_MSG_CHECKING([where to find libltdl headers]) ++AC_MSG_RESULT([$LTDLINCL]) ++AC_MSG_CHECKING([where to find libltdl library]) ++AC_MSG_RESULT([$LIBLTDL]) ++ ++_LTDL_SETUP ++ ++dnl restore autoconf definition. ++m4_popdef([AC_LIBOBJ]) ++m4_popdef([AC_LIBSOURCES]) ++ ++AC_CONFIG_COMMANDS_PRE([ ++ _ltdl_libobjs= ++ _ltdl_ltlibobjs= ++ if test -n "$_LT_LIBOBJS"; then ++ # Remove the extension. ++ _lt_sed_drop_objext='s/\.o$//;s/\.obj$//' ++ for i in `for i in $_LT_LIBOBJS; do echo "$i"; done | sed "$_lt_sed_drop_objext" | sort -u`; do ++ _ltdl_libobjs="$_ltdl_libobjs $lt_libobj_prefix$i.$ac_objext" ++ _ltdl_ltlibobjs="$_ltdl_ltlibobjs $lt_libobj_prefix$i.lo" ++ done ++ fi ++ AC_SUBST([ltdl_LIBOBJS], [$_ltdl_libobjs]) ++ AC_SUBST([ltdl_LTLIBOBJS], [$_ltdl_ltlibobjs]) ++]) ++ ++# Only expand once: ++m4_define([LTDL_INIT]) ++]) ++m4trace:/usr/share/aclocal/ltdl.m4:368: -1- AU_DEFUN([AC_LIB_LTDL], [LTDL_INIT($@)]) ++m4trace:/usr/share/aclocal/ltdl.m4:368: -1- AC_DEFUN([AC_LIB_LTDL], [AC_DIAGNOSE([obsolete], [The macro `AC_LIB_LTDL' is obsolete. ++You should run autoupdate.])dnl ++LTDL_INIT($@)]) ++m4trace:/usr/share/aclocal/ltdl.m4:369: -1- AU_DEFUN([AC_WITH_LTDL], [LTDL_INIT($@)]) ++m4trace:/usr/share/aclocal/ltdl.m4:369: -1- AC_DEFUN([AC_WITH_LTDL], [AC_DIAGNOSE([obsolete], [The macro `AC_WITH_LTDL' is obsolete. ++You should run autoupdate.])dnl ++LTDL_INIT($@)]) ++m4trace:/usr/share/aclocal/ltdl.m4:370: -1- AU_DEFUN([LT_WITH_LTDL], [LTDL_INIT($@)]) ++m4trace:/usr/share/aclocal/ltdl.m4:370: -1- AC_DEFUN([LT_WITH_LTDL], [AC_DIAGNOSE([obsolete], [The macro `LT_WITH_LTDL' is obsolete. ++You should run autoupdate.])dnl ++LTDL_INIT($@)]) ++m4trace:/usr/share/aclocal/ltdl.m4:383: -1- AC_DEFUN([_LTDL_SETUP], [AC_REQUIRE([AC_PROG_CC])dnl ++AC_REQUIRE([LT_SYS_MODULE_EXT])dnl ++AC_REQUIRE([LT_SYS_MODULE_PATH])dnl ++AC_REQUIRE([LT_SYS_DLSEARCH_PATH])dnl ++AC_REQUIRE([LT_LIB_DLLOAD])dnl ++AC_REQUIRE([LT_SYS_SYMBOL_USCORE])dnl ++AC_REQUIRE([LT_FUNC_DLSYM_USCORE])dnl ++AC_REQUIRE([LT_SYS_DLOPEN_DEPLIBS])dnl ++AC_REQUIRE([gl_FUNC_ARGZ])dnl ++ ++m4_require([_LT_CHECK_OBJDIR])dnl ++m4_require([_LT_HEADER_DLFCN])dnl ++m4_require([_LT_CHECK_DLPREOPEN])dnl ++m4_require([_LT_DECL_SED])dnl ++ ++# lt_cv_dlopen_self gets defined by LT_SYS_DLOPEN_SELF, called by LT_INIT ++if test "$lt_cv_dlopen_self" = yes; then ++ AC_DEFINE([LTDL_DLOPEN_SELF_WORKS], [1], ++ [Define if dlopen(NULL) is able to resolve symbols from the main program.]) ++fi ++ ++dnl Don't require this, or it will be expanded earlier than the code ++dnl that sets the variables it relies on: ++_LT_ENABLE_INSTALL ++ ++dnl _LTDL_MODE specific code must be called at least once: ++_LTDL_MODE_DISPATCH ++ ++# In order that ltdl.c can compile, find out the first AC_CONFIG_HEADERS ++# the user used. This is so that ltdl.h can pick up the parent projects ++# config.h file, The first file in AC_CONFIG_HEADERS must contain the ++# definitions required by ltdl.c. ++# FIXME: Remove use of undocumented AC_LIST_HEADERS (2.59 compatibility). ++AC_CONFIG_COMMANDS_PRE([dnl ++m4_pattern_allow([^LT_CONFIG_H$])dnl ++m4_ifset([AH_HEADER], ++ [LT_CONFIG_H=AH_HEADER], ++ [m4_ifset([AC_LIST_HEADERS], ++ [LT_CONFIG_H=`echo "AC_LIST_HEADERS" | $SED 's,^[[ ]]*,,;s,[[ :]].*$,,'`], ++ [])])]) ++AC_SUBST([LT_CONFIG_H]) ++ ++AC_CHECK_HEADERS([unistd.h dl.h sys/dl.h dld.h mach-o/dyld.h dirent.h], ++ [], [], [AC_INCLUDES_DEFAULT]) ++ ++AC_CHECK_FUNCS([closedir opendir readdir], [], [AC_LIBOBJ([lt__dirent])]) ++AC_CHECK_FUNCS([strlcat strlcpy], [], [AC_LIBOBJ([lt__strl])]) ++ ++name=ltdl ++LTDLOPEN=`eval "\\$ECHO \"$libname_spec\""` ++AC_SUBST([LTDLOPEN]) ++]) ++m4trace:/usr/share/aclocal/ltdl.m4:457: -1- AC_DEFUN([LT_SYS_DLOPEN_DEPLIBS], [AC_REQUIRE([AC_CANONICAL_HOST])dnl ++AC_CACHE_CHECK([whether deplibs are loaded by dlopen], ++ [lt_cv_sys_dlopen_deplibs], ++ [# PORTME does your system automatically load deplibs for dlopen? ++ # or its logical equivalent (e.g. shl_load for HP-UX < 11) ++ # For now, we just catch OSes we know something about -- in the ++ # future, we'll try test this programmatically. ++ lt_cv_sys_dlopen_deplibs=unknown ++ case $host_os in ++ aix3*|aix4.1.*|aix4.2.*) ++ # Unknown whether this is true for these versions of AIX, but ++ # we want this `case' here to explicitly catch those versions. ++ lt_cv_sys_dlopen_deplibs=unknown ++ ;; ++ aix[[4-9]]*) ++ lt_cv_sys_dlopen_deplibs=yes ++ ;; ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ lt_cv_sys_dlopen_deplibs=no ++ ;; ++ esac ++ ;; ++ darwin*) ++ # Assuming the user has installed a libdl from somewhere, this is true ++ # If you are looking for one http://www.opendarwin.org/projects/dlcompat ++ lt_cv_sys_dlopen_deplibs=yes ++ ;; ++ freebsd* | dragonfly*) ++ lt_cv_sys_dlopen_deplibs=yes ++ ;; ++ gnu* | linux* | k*bsd*-gnu) ++ # GNU and its variants, using gnu ld.so (Glibc) ++ lt_cv_sys_dlopen_deplibs=yes ++ ;; ++ hpux10*|hpux11*) ++ lt_cv_sys_dlopen_deplibs=yes ++ ;; ++ interix*) ++ lt_cv_sys_dlopen_deplibs=yes ++ ;; ++ irix[[12345]]*|irix6.[[01]]*) ++ # Catch all versions of IRIX before 6.2, and indicate that we don't ++ # know how it worked for any of those versions. ++ lt_cv_sys_dlopen_deplibs=unknown ++ ;; ++ irix*) ++ # The case above catches anything before 6.2, and it's known that ++ # at 6.2 and later dlopen does load deplibs. ++ lt_cv_sys_dlopen_deplibs=yes ++ ;; ++ netbsd* | netbsdelf*-gnu) ++ lt_cv_sys_dlopen_deplibs=yes ++ ;; ++ openbsd*) ++ lt_cv_sys_dlopen_deplibs=yes ++ ;; ++ osf[[1234]]*) ++ # dlopen did load deplibs (at least at 4.x), but until the 5.x series, ++ # it did *not* use an RPATH in a shared library to find objects the ++ # library depends on, so we explicitly say `no'. ++ lt_cv_sys_dlopen_deplibs=no ++ ;; ++ osf5.0|osf5.0a|osf5.1) ++ # dlopen *does* load deplibs and with the right loader patch applied ++ # it even uses RPATH in a shared library to search for shared objects ++ # that the library depends on, but there's no easy way to know if that ++ # patch is installed. Since this is the case, all we can really ++ # say is unknown -- it depends on the patch being installed. If ++ # it is, this changes to `yes'. Without it, it would be `no'. ++ lt_cv_sys_dlopen_deplibs=unknown ++ ;; ++ osf*) ++ # the two cases above should catch all versions of osf <= 5.1. Read ++ # the comments above for what we know about them. ++ # At > 5.1, deplibs are loaded *and* any RPATH in a shared library ++ # is used to find them so we can finally say `yes'. ++ lt_cv_sys_dlopen_deplibs=yes ++ ;; ++ qnx*) ++ lt_cv_sys_dlopen_deplibs=yes ++ ;; ++ solaris*) ++ lt_cv_sys_dlopen_deplibs=yes ++ ;; ++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ libltdl_cv_sys_dlopen_deplibs=yes ++ ;; ++ esac ++ ]) ++if test "$lt_cv_sys_dlopen_deplibs" != yes; then ++ AC_DEFINE([LTDL_DLOPEN_DEPLIBS], [1], ++ [Define if the OS needs help to load dependent libraries for dlopen().]) ++fi ++]) ++m4trace:/usr/share/aclocal/ltdl.m4:556: -1- AU_DEFUN([AC_LTDL_SYS_DLOPEN_DEPLIBS], [m4_if($#, 0, [LT_SYS_DLOPEN_DEPLIBS], [LT_SYS_DLOPEN_DEPLIBS($@)])]) ++m4trace:/usr/share/aclocal/ltdl.m4:556: -1- AC_DEFUN([AC_LTDL_SYS_DLOPEN_DEPLIBS], [AC_DIAGNOSE([obsolete], [The macro `AC_LTDL_SYS_DLOPEN_DEPLIBS' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_SYS_DLOPEN_DEPLIBS], [LT_SYS_DLOPEN_DEPLIBS($@)])]) ++m4trace:/usr/share/aclocal/ltdl.m4:563: -1- AC_DEFUN([LT_SYS_MODULE_EXT], [m4_require([_LT_SYS_DYNAMIC_LINKER])dnl ++AC_CACHE_CHECK([which extension is used for runtime loadable modules], ++ [libltdl_cv_shlibext], ++[ ++module=yes ++eval libltdl_cv_shlibext=$shrext_cmds ++ ]) ++if test -n "$libltdl_cv_shlibext"; then ++ m4_pattern_allow([LT_MODULE_EXT])dnl ++ AC_DEFINE_UNQUOTED([LT_MODULE_EXT], ["$libltdl_cv_shlibext"], ++ [Define to the extension used for runtime loadable modules, say, ".so".]) ++fi ++]) ++m4trace:/usr/share/aclocal/ltdl.m4:579: -1- AU_DEFUN([AC_LTDL_SHLIBEXT], [m4_if($#, 0, [LT_SYS_MODULE_EXT], [LT_SYS_MODULE_EXT($@)])]) ++m4trace:/usr/share/aclocal/ltdl.m4:579: -1- AC_DEFUN([AC_LTDL_SHLIBEXT], [AC_DIAGNOSE([obsolete], [The macro `AC_LTDL_SHLIBEXT' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_SYS_MODULE_EXT], [LT_SYS_MODULE_EXT($@)])]) ++m4trace:/usr/share/aclocal/ltdl.m4:586: -1- AC_DEFUN([LT_SYS_MODULE_PATH], [m4_require([_LT_SYS_DYNAMIC_LINKER])dnl ++AC_CACHE_CHECK([which variable specifies run-time module search path], ++ [lt_cv_module_path_var], [lt_cv_module_path_var="$shlibpath_var"]) ++if test -n "$lt_cv_module_path_var"; then ++ m4_pattern_allow([LT_MODULE_PATH_VAR])dnl ++ AC_DEFINE_UNQUOTED([LT_MODULE_PATH_VAR], ["$lt_cv_module_path_var"], ++ [Define to the name of the environment variable that determines the run-time module search path.]) ++fi ++]) ++m4trace:/usr/share/aclocal/ltdl.m4:598: -1- AU_DEFUN([AC_LTDL_SHLIBPATH], [m4_if($#, 0, [LT_SYS_MODULE_PATH], [LT_SYS_MODULE_PATH($@)])]) ++m4trace:/usr/share/aclocal/ltdl.m4:598: -1- AC_DEFUN([AC_LTDL_SHLIBPATH], [AC_DIAGNOSE([obsolete], [The macro `AC_LTDL_SHLIBPATH' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_SYS_MODULE_PATH], [LT_SYS_MODULE_PATH($@)])]) ++m4trace:/usr/share/aclocal/ltdl.m4:605: -1- AC_DEFUN([LT_SYS_DLSEARCH_PATH], [m4_require([_LT_SYS_DYNAMIC_LINKER])dnl ++AC_CACHE_CHECK([for the default library search path], ++ [lt_cv_sys_dlsearch_path], ++ [lt_cv_sys_dlsearch_path="$sys_lib_dlsearch_path_spec"]) ++if test -n "$lt_cv_sys_dlsearch_path"; then ++ sys_dlsearch_path= ++ for dir in $lt_cv_sys_dlsearch_path; do ++ if test -z "$sys_dlsearch_path"; then ++ sys_dlsearch_path="$dir" ++ else ++ sys_dlsearch_path="$sys_dlsearch_path$PATH_SEPARATOR$dir" ++ fi ++ done ++ m4_pattern_allow([LT_DLSEARCH_PATH])dnl ++ AC_DEFINE_UNQUOTED([LT_DLSEARCH_PATH], ["$sys_dlsearch_path"], ++ [Define to the system default library search path.]) ++fi ++]) ++m4trace:/usr/share/aclocal/ltdl.m4:626: -1- AU_DEFUN([AC_LTDL_SYSSEARCHPATH], [m4_if($#, 0, [LT_SYS_DLSEARCH_PATH], [LT_SYS_DLSEARCH_PATH($@)])]) ++m4trace:/usr/share/aclocal/ltdl.m4:626: -1- AC_DEFUN([AC_LTDL_SYSSEARCHPATH], [AC_DIAGNOSE([obsolete], [The macro `AC_LTDL_SYSSEARCHPATH' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_SYS_DLSEARCH_PATH], [LT_SYS_DLSEARCH_PATH($@)])]) ++m4trace:/usr/share/aclocal/ltdl.m4:652: -1- AC_DEFUN([LT_LIB_DLLOAD], [m4_pattern_allow([^LT_DLLOADERS$]) ++LT_DLLOADERS= ++AC_SUBST([LT_DLLOADERS]) ++ ++AC_LANG_PUSH([C]) ++ ++LIBADD_DLOPEN= ++AC_SEARCH_LIBS([dlopen], [dl], ++ [AC_DEFINE([HAVE_LIBDL], [1], ++ [Define if you have the libdl library or equivalent.]) ++ if test "$ac_cv_search_dlopen" != "none required" ; then ++ LIBADD_DLOPEN="-ldl" ++ fi ++ libltdl_cv_lib_dl_dlopen="yes" ++ LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la"], ++ [AC_LINK_IFELSE([AC_LANG_PROGRAM([[#if HAVE_DLFCN_H ++# include ++#endif ++ ]], [[dlopen(0, 0);]])], ++ [AC_DEFINE([HAVE_LIBDL], [1], ++ [Define if you have the libdl library or equivalent.]) ++ libltdl_cv_func_dlopen="yes" ++ LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la"], ++ [AC_CHECK_LIB([svld], [dlopen], ++ [AC_DEFINE([HAVE_LIBDL], [1], ++ [Define if you have the libdl library or equivalent.]) ++ LIBADD_DLOPEN="-lsvld" libltdl_cv_func_dlopen="yes" ++ LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la"])])]) ++if test x"$libltdl_cv_func_dlopen" = xyes || test x"$libltdl_cv_lib_dl_dlopen" = xyes ++then ++ lt_save_LIBS="$LIBS" ++ LIBS="$LIBS $LIBADD_DLOPEN" ++ AC_CHECK_FUNCS([dlerror]) ++ LIBS="$lt_save_LIBS" ++fi ++AC_SUBST([LIBADD_DLOPEN]) ++ ++LIBADD_SHL_LOAD= ++AC_CHECK_FUNC([shl_load], ++ [AC_DEFINE([HAVE_SHL_LOAD], [1], ++ [Define if you have the shl_load function.]) ++ LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}shl_load.la"], ++ [AC_CHECK_LIB([dld], [shl_load], ++ [AC_DEFINE([HAVE_SHL_LOAD], [1], ++ [Define if you have the shl_load function.]) ++ LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}shl_load.la" ++ LIBADD_SHL_LOAD="-ldld"])]) ++AC_SUBST([LIBADD_SHL_LOAD]) ++ ++case $host_os in ++darwin[[1567]].*) ++# We only want this for pre-Mac OS X 10.4. ++ AC_CHECK_FUNC([_dyld_func_lookup], ++ [AC_DEFINE([HAVE_DYLD], [1], ++ [Define if you have the _dyld_func_lookup function.]) ++ LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dyld.la"]) ++ ;; ++beos*) ++ LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}load_add_on.la" ++ ;; ++cygwin* | mingw* | os2* | pw32*) ++ AC_CHECK_DECLS([cygwin_conv_path], [], [], [[#include ]]) ++ LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}loadlibrary.la" ++ ;; ++esac ++ ++AC_CHECK_LIB([dld], [dld_link], ++ [AC_DEFINE([HAVE_DLD], [1], ++ [Define if you have the GNU dld library.]) ++ LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dld_link.la"]) ++AC_SUBST([LIBADD_DLD_LINK]) ++ ++m4_pattern_allow([^LT_DLPREOPEN$]) ++LT_DLPREOPEN= ++if test -n "$LT_DLLOADERS" ++then ++ for lt_loader in $LT_DLLOADERS; do ++ LT_DLPREOPEN="$LT_DLPREOPEN-dlpreopen $lt_loader " ++ done ++ AC_DEFINE([HAVE_LIBDLLOADER], [1], ++ [Define if libdlloader will be built on this platform]) ++fi ++AC_SUBST([LT_DLPREOPEN]) ++ ++dnl This isn't used anymore, but set it for backwards compatibility ++LIBADD_DL="$LIBADD_DLOPEN $LIBADD_SHL_LOAD" ++AC_SUBST([LIBADD_DL]) ++ ++AC_LANG_POP ++]) ++m4trace:/usr/share/aclocal/ltdl.m4:745: -1- AU_DEFUN([AC_LTDL_DLLIB], [m4_if($#, 0, [LT_LIB_DLLOAD], [LT_LIB_DLLOAD($@)])]) ++m4trace:/usr/share/aclocal/ltdl.m4:745: -1- AC_DEFUN([AC_LTDL_DLLIB], [AC_DIAGNOSE([obsolete], [The macro `AC_LTDL_DLLIB' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_LIB_DLLOAD], [LT_LIB_DLLOAD($@)])]) ++m4trace:/usr/share/aclocal/ltdl.m4:753: -1- AC_DEFUN([LT_SYS_SYMBOL_USCORE], [m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl ++AC_CACHE_CHECK([for _ prefix in compiled symbols], ++ [lt_cv_sys_symbol_underscore], ++ [lt_cv_sys_symbol_underscore=no ++ cat > conftest.$ac_ext <<_LT_EOF ++void nm_test_func(){} ++int main(){nm_test_func;return 0;} ++_LT_EOF ++ if AC_TRY_EVAL(ac_compile); then ++ # Now try to grab the symbols. ++ ac_nlist=conftest.nm ++ if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then ++ # See whether the symbols have a leading underscore. ++ if grep '^. _nm_test_func' "$ac_nlist" >/dev/null; then ++ lt_cv_sys_symbol_underscore=yes ++ else ++ if grep '^. nm_test_func ' "$ac_nlist" >/dev/null; then ++ : ++ else ++ echo "configure: cannot find nm_test_func in $ac_nlist" >&AS_MESSAGE_LOG_FD ++ fi ++ fi ++ else ++ echo "configure: cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD ++ fi ++ else ++ echo "configure: failed program was:" >&AS_MESSAGE_LOG_FD ++ cat conftest.c >&AS_MESSAGE_LOG_FD ++ fi ++ rm -rf conftest* ++ ]) ++ sys_symbol_underscore=$lt_cv_sys_symbol_underscore ++ AC_SUBST([sys_symbol_underscore]) ++]) ++m4trace:/usr/share/aclocal/ltdl.m4:790: -1- AU_DEFUN([AC_LTDL_SYMBOL_USCORE], [m4_if($#, 0, [LT_SYS_SYMBOL_USCORE], [LT_SYS_SYMBOL_USCORE($@)])]) ++m4trace:/usr/share/aclocal/ltdl.m4:790: -1- AC_DEFUN([AC_LTDL_SYMBOL_USCORE], [AC_DIAGNOSE([obsolete], [The macro `AC_LTDL_SYMBOL_USCORE' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_SYS_SYMBOL_USCORE], [LT_SYS_SYMBOL_USCORE($@)])]) ++m4trace:/usr/share/aclocal/ltdl.m4:797: -1- AC_DEFUN([LT_FUNC_DLSYM_USCORE], [AC_REQUIRE([LT_SYS_SYMBOL_USCORE])dnl ++if test x"$lt_cv_sys_symbol_underscore" = xyes; then ++ if test x"$libltdl_cv_func_dlopen" = xyes || ++ test x"$libltdl_cv_lib_dl_dlopen" = xyes ; then ++ AC_CACHE_CHECK([whether we have to add an underscore for dlsym], ++ [libltdl_cv_need_uscore], ++ [libltdl_cv_need_uscore=unknown ++ save_LIBS="$LIBS" ++ LIBS="$LIBS $LIBADD_DLOPEN" ++ _LT_TRY_DLOPEN_SELF( ++ [libltdl_cv_need_uscore=no], [libltdl_cv_need_uscore=yes], ++ [], [libltdl_cv_need_uscore=cross]) ++ LIBS="$save_LIBS" ++ ]) ++ fi ++fi ++ ++if test x"$libltdl_cv_need_uscore" = xyes; then ++ AC_DEFINE([NEED_USCORE], [1], ++ [Define if dlsym() requires a leading underscore in symbol names.]) ++fi ++]) ++m4trace:/usr/share/aclocal/ltdl.m4:822: -1- AU_DEFUN([AC_LTDL_DLSYM_USCORE], [m4_if($#, 0, [LT_FUNC_DLSYM_USCORE], [LT_FUNC_DLSYM_USCORE($@)])]) ++m4trace:/usr/share/aclocal/ltdl.m4:822: -1- AC_DEFUN([AC_LTDL_DLSYM_USCORE], [AC_DIAGNOSE([obsolete], [The macro `AC_LTDL_DLSYM_USCORE' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_FUNC_DLSYM_USCORE], [LT_FUNC_DLSYM_USCORE($@)])]) ++m4trace:/usr/share/aclocal/ltoptions.m4:13: -1- AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) ++m4trace:/usr/share/aclocal/ltoptions.m4:110: -1- AU_DEFUN([AC_LIBTOOL_DLOPEN], [_LT_SET_OPTION([LT_INIT], [dlopen]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you ++put the `dlopen' option into LT_INIT's first parameter.]) ++]) ++m4trace:/usr/share/aclocal/ltoptions.m4:110: -1- AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_DLOPEN' is obsolete. ++You should run autoupdate.])dnl ++_LT_SET_OPTION([LT_INIT], [dlopen]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you ++put the `dlopen' option into LT_INIT's first parameter.]) ++]) ++m4trace:/usr/share/aclocal/ltoptions.m4:145: -1- AU_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_REQUIRE([AC_CANONICAL_HOST])dnl ++_LT_SET_OPTION([LT_INIT], [win32-dll]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you ++put the `win32-dll' option into LT_INIT's first parameter.]) ++]) ++m4trace:/usr/share/aclocal/ltoptions.m4:145: -1- AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_WIN32_DLL' is obsolete. ++You should run autoupdate.])dnl ++AC_REQUIRE([AC_CANONICAL_HOST])dnl ++_LT_SET_OPTION([LT_INIT], [win32-dll]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you ++put the `win32-dll' option into LT_INIT's first parameter.]) ++]) ++m4trace:/usr/share/aclocal/ltoptions.m4:194: -1- AC_DEFUN([AC_ENABLE_SHARED], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) ++]) ++m4trace:/usr/share/aclocal/ltoptions.m4:198: -1- AC_DEFUN([AC_DISABLE_SHARED], [_LT_SET_OPTION([LT_INIT], [disable-shared]) ++]) ++m4trace:/usr/share/aclocal/ltoptions.m4:202: -1- AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) ++m4trace:/usr/share/aclocal/ltoptions.m4:202: -1- AC_DEFUN([AM_ENABLE_SHARED], [AC_DIAGNOSE([obsolete], [The macro `AM_ENABLE_SHARED' is obsolete. ++You should run autoupdate.])dnl ++AC_ENABLE_SHARED($@)]) ++m4trace:/usr/share/aclocal/ltoptions.m4:203: -1- AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) ++m4trace:/usr/share/aclocal/ltoptions.m4:203: -1- AC_DEFUN([AM_DISABLE_SHARED], [AC_DIAGNOSE([obsolete], [The macro `AM_DISABLE_SHARED' is obsolete. ++You should run autoupdate.])dnl ++AC_DISABLE_SHARED($@)]) ++m4trace:/usr/share/aclocal/ltoptions.m4:248: -1- AC_DEFUN([AC_ENABLE_STATIC], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) ++]) ++m4trace:/usr/share/aclocal/ltoptions.m4:252: -1- AC_DEFUN([AC_DISABLE_STATIC], [_LT_SET_OPTION([LT_INIT], [disable-static]) ++]) ++m4trace:/usr/share/aclocal/ltoptions.m4:256: -1- AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) ++m4trace:/usr/share/aclocal/ltoptions.m4:256: -1- AC_DEFUN([AM_ENABLE_STATIC], [AC_DIAGNOSE([obsolete], [The macro `AM_ENABLE_STATIC' is obsolete. ++You should run autoupdate.])dnl ++AC_ENABLE_STATIC($@)]) ++m4trace:/usr/share/aclocal/ltoptions.m4:257: -1- AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) ++m4trace:/usr/share/aclocal/ltoptions.m4:257: -1- AC_DEFUN([AM_DISABLE_STATIC], [AC_DIAGNOSE([obsolete], [The macro `AM_DISABLE_STATIC' is obsolete. ++You should run autoupdate.])dnl ++AC_DISABLE_STATIC($@)]) ++m4trace:/usr/share/aclocal/ltoptions.m4:302: -1- AU_DEFUN([AC_ENABLE_FAST_INSTALL], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you put ++the `fast-install' option into LT_INIT's first parameter.]) ++]) ++m4trace:/usr/share/aclocal/ltoptions.m4:302: -1- AC_DEFUN([AC_ENABLE_FAST_INSTALL], [AC_DIAGNOSE([obsolete], [The macro `AC_ENABLE_FAST_INSTALL' is obsolete. ++You should run autoupdate.])dnl ++_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you put ++the `fast-install' option into LT_INIT's first parameter.]) ++]) ++m4trace:/usr/share/aclocal/ltoptions.m4:309: -1- AU_DEFUN([AC_DISABLE_FAST_INSTALL], [_LT_SET_OPTION([LT_INIT], [disable-fast-install]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you put ++the `disable-fast-install' option into LT_INIT's first parameter.]) ++]) ++m4trace:/usr/share/aclocal/ltoptions.m4:309: -1- AC_DEFUN([AC_DISABLE_FAST_INSTALL], [AC_DIAGNOSE([obsolete], [The macro `AC_DISABLE_FAST_INSTALL' is obsolete. ++You should run autoupdate.])dnl ++_LT_SET_OPTION([LT_INIT], [disable-fast-install]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you put ++the `disable-fast-install' option into LT_INIT's first parameter.]) ++]) ++m4trace:/usr/share/aclocal/ltoptions.m4:342: -1- AU_DEFUN([AC_LIBTOOL_PICMODE], [_LT_SET_OPTION([LT_INIT], [pic-only]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you ++put the `pic-only' option into LT_INIT's first parameter.]) ++]) ++m4trace:/usr/share/aclocal/ltoptions.m4:342: -1- AC_DEFUN([AC_LIBTOOL_PICMODE], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_PICMODE' is obsolete. ++You should run autoupdate.])dnl ++_LT_SET_OPTION([LT_INIT], [pic-only]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you ++put the `pic-only' option into LT_INIT's first parameter.]) ++]) ++m4trace:/usr/share/aclocal/ltsugar.m4:13: -1- AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) ++m4trace:/usr/share/aclocal/ltversion.m4:18: -1- AC_DEFUN([LTVERSION_VERSION], [macro_version='2.2.4' ++macro_revision='1.2976' ++_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) ++_LT_DECL(, macro_revision, 0) ++]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:36: -1- AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:40: -1- AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:41: -1- AC_DEFUN([_LT_AC_SHELL_INIT]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:42: -1- AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:44: -1- AC_DEFUN([_LT_AC_TAGVAR]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:45: -1- AC_DEFUN([AC_LTDL_ENABLE_INSTALL]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:46: -1- AC_DEFUN([AC_LTDL_PREOPEN]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:47: -1- AC_DEFUN([_LT_AC_SYS_COMPILER]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:48: -1- AC_DEFUN([_LT_AC_LOCK]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:49: -1- AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:50: -1- AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:51: -1- AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:52: -1- AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:53: -1- AC_DEFUN([AC_LIBTOOL_OBJDIR]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:54: -1- AC_DEFUN([AC_LTDL_OBJDIR]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:55: -1- AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:56: -1- AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:57: -1- AC_DEFUN([AC_PATH_MAGIC]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:58: -1- AC_DEFUN([AC_PROG_LD_GNU]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:59: -1- AC_DEFUN([AC_PROG_LD_RELOAD_FLAG]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:60: -1- AC_DEFUN([AC_DEPLIBS_CHECK_METHOD]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:61: -1- AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:62: -1- AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:63: -1- AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:64: -1- AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:65: -1- AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:66: -1- AC_DEFUN([LT_AC_PROG_EGREP]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:71: -1- AC_DEFUN([_AC_PROG_LIBTOOL]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:72: -1- AC_DEFUN([AC_LIBTOOL_SETUP]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:73: -1- AC_DEFUN([_LT_AC_CHECK_DLFCN]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:74: -1- AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:75: -1- AC_DEFUN([_LT_AC_TAGCONFIG]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:77: -1- AC_DEFUN([_LT_AC_LANG_CXX]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:78: -1- AC_DEFUN([_LT_AC_LANG_F77]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:79: -1- AC_DEFUN([_LT_AC_LANG_GCJ]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:80: -1- AC_DEFUN([AC_LIBTOOL_RC]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:81: -1- AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:82: -1- AC_DEFUN([_LT_AC_LANG_C_CONFIG]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:83: -1- AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:84: -1- AC_DEFUN([_LT_AC_LANG_CXX_CONFIG]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:85: -1- AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:86: -1- AC_DEFUN([_LT_AC_LANG_F77_CONFIG]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:87: -1- AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:88: -1- AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:89: -1- AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:90: -1- AC_DEFUN([_LT_AC_LANG_RC_CONFIG]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:91: -1- AC_DEFUN([AC_LIBTOOL_CONFIG]) ++m4trace:/usr/share/aclocal/lt~obsolete.m4:92: -1- AC_DEFUN([_LT_AC_FILE_LTDLL_C]) ++m4trace:/usr/share/aclocal/pkg.m4:26: -1- AC_DEFUN([PKG_PROG_PKG_CONFIG], [m4_pattern_forbid([^_?PKG_[A-Z_]+$]) ++m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) ++AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl ++if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then ++ AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) ++fi ++if test -n "$PKG_CONFIG"; then ++ _pkg_min_version=m4_default([$1], [0.9.0]) ++ AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) ++ if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then ++ AC_MSG_RESULT([yes]) ++ else ++ AC_MSG_RESULT([no]) ++ PKG_CONFIG="" ++ fi ++ ++fi[]dnl ++]) ++m4trace:/usr/share/aclocal/pkg.m4:56: -1- AC_DEFUN([PKG_CHECK_EXISTS], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl ++if test -n "$PKG_CONFIG" && \ ++ AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then ++ m4_ifval([$2], [$2], [:]) ++m4_ifvaln([$3], [else ++ $3])dnl ++fi]) ++m4trace:/usr/share/aclocal/pkg.m4:84: -1- AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], [AC_REQUIRE([PKG_PROG_PKG_CONFIG]) ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi[]dnl ++]) ++m4trace:/usr/share/aclocal/pkg.m4:104: -1- AC_DEFUN([PKG_CHECK_MODULES], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl ++AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl ++AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl ++ ++pkg_failed=no ++AC_MSG_CHECKING([for $1]) ++ ++_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) ++_PKG_CONFIG([$1][_LIBS], [libs], [$2]) ++ ++m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS ++and $1[]_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details.]) ++ ++if test $pkg_failed = yes; then ++ _PKG_SHORT_ERRORS_SUPPORTED ++ if test $_pkg_short_errors_supported = yes; then ++ $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$2"` ++ else ++ $1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD ++ ++ ifelse([$4], , [AC_MSG_ERROR(dnl ++[Package requirements ($2) were not met: ++ ++$$1_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++_PKG_TEXT ++])], ++ [AC_MSG_RESULT([no]) ++ $4]) ++elif test $pkg_failed = untried; then ++ ifelse([$4], , [AC_MSG_FAILURE(dnl ++[The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++_PKG_TEXT ++ ++To get pkg-config, see .])], ++ [$4]) ++else ++ $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS ++ $1[]_LIBS=$pkg_cv_[]$1[]_LIBS ++ AC_MSG_RESULT([yes]) ++ ifelse([$3], , :, [$3]) ++fi[]dnl ++]) ++m4trace:/usr/share/aclocal-1.9/amversion.m4:13: -1- AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) ++m4trace:/usr/share/aclocal-1.9/amversion.m4:19: -1- AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.9.6])]) ++m4trace:/usr/share/aclocal-1.9/auxdir.m4:47: -1- AC_DEFUN([AM_AUX_DIR_EXPAND], [dnl Rely on autoconf to set up CDPATH properly. ++AC_PREREQ([2.50])dnl ++# expand $ac_aux_dir to an absolute path ++am_aux_dir=`cd $ac_aux_dir && pwd` ++]) ++m4trace:/usr/share/aclocal-1.9/cond.m4:15: -1- AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ(2.52)dnl ++ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], ++ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl ++AC_SUBST([$1_TRUE]) ++AC_SUBST([$1_FALSE]) ++if $2; then ++ $1_TRUE= ++ $1_FALSE='#' ++else ++ $1_TRUE='#' ++ $1_FALSE= ++fi ++AC_CONFIG_COMMANDS_PRE( ++[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then ++ AC_MSG_ERROR([[conditional "$1" was never defined. ++Usually this means the macro was only invoked conditionally.]]) ++fi])]) ++m4trace:/usr/share/aclocal-1.9/depend.m4:29: -1- AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl ++AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl ++AC_REQUIRE([AM_MAKE_INCLUDE])dnl ++AC_REQUIRE([AM_DEP_TRACK])dnl ++ ++ifelse([$1], CC, [depcc="$CC" am_compiler_list=], ++ [$1], CXX, [depcc="$CXX" am_compiler_list=], ++ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], ++ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], ++ [depcc="$$1" am_compiler_list=]) ++ ++AC_CACHE_CHECK([dependency style of $depcc], ++ [am_cv_$1_dependencies_compiler_type], ++[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then ++ # We make a subdir and do the tests there. Otherwise we can end up ++ # making bogus files that we don't know about and never remove. For ++ # instance it was reported that on HP-UX the gcc test will end up ++ # making a dummy file named `D' -- because `-MD' means `put the output ++ # in D'. ++ mkdir conftest.dir ++ # Copy depcomp to subdir because otherwise we won't find it if we're ++ # using a relative directory. ++ cp "$am_depcomp" conftest.dir ++ cd conftest.dir ++ # We will build objects and dependencies in a subdirectory because ++ # it helps to detect inapplicable dependency modes. For instance ++ # both Tru64's cc and ICC support -MD to output dependencies as a ++ # side effect of compilation, but ICC will put the dependencies in ++ # the current directory while Tru64 will put them in the object ++ # directory. ++ mkdir sub ++ ++ am_cv_$1_dependencies_compiler_type=none ++ if test "$am_compiler_list" = ""; then ++ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` ++ fi ++ for depmode in $am_compiler_list; do ++ # Setup a source with many dependencies, because some compilers ++ # like to wrap large dependency lists on column 80 (with \), and ++ # we should not choose a depcomp mode which is confused by this. ++ # ++ # We need to recreate these files for each test, as the compiler may ++ # overwrite some of them when testing with obscure command lines. ++ # This happens at least with the AIX C compiler. ++ : > sub/conftest.c ++ for i in 1 2 3 4 5 6; do ++ echo '#include "conftst'$i'.h"' >> sub/conftest.c ++ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with ++ # Solaris 8's {/usr,}/bin/sh. ++ touch sub/conftst$i.h ++ done ++ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf ++ ++ case $depmode in ++ nosideeffect) ++ # after this tag, mechanisms are not by side-effect, so they'll ++ # only be used when explicitly requested ++ if test "x$enable_dependency_tracking" = xyes; then ++ continue ++ else ++ break ++ fi ++ ;; ++ none) break ;; ++ esac ++ # We check with `-c' and `-o' for the sake of the "dashmstdout" ++ # mode. It turns out that the SunPro C++ compiler does not properly ++ # handle `-M -o', and we need to detect this. ++ if depmode=$depmode \ ++ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ ++ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ ++ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ ++ >/dev/null 2>conftest.err && ++ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && ++ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then ++ # icc doesn't choke on unknown options, it will just issue warnings ++ # or remarks (even with -Werror). So we grep stderr for any message ++ # that says an option was ignored or not supported. ++ # When given -MP, icc 7.0 and 7.1 complain thusly: ++ # icc: Command line warning: ignoring option '-M'; no argument required ++ # The diagnosis changed in icc 8.0: ++ # icc: Command line remark: option '-MP' not supported ++ if (grep 'ignoring option' conftest.err || ++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else ++ am_cv_$1_dependencies_compiler_type=$depmode ++ break ++ fi ++ fi ++ done ++ ++ cd .. ++ rm -rf conftest.dir ++else ++ am_cv_$1_dependencies_compiler_type=none ++fi ++]) ++AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) ++AM_CONDITIONAL([am__fastdep$1], [ ++ test "x$enable_dependency_tracking" != xno \ ++ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ++]) ++m4trace:/usr/share/aclocal-1.9/depend.m4:138: -1- AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl ++AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ++]) ++m4trace:/usr/share/aclocal-1.9/depend.m4:146: -1- AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE(dependency-tracking, ++[ --disable-dependency-tracking speeds up one-time build ++ --enable-dependency-tracking do not reject slow dependency extractors]) ++if test "x$enable_dependency_tracking" != xno; then ++ am_depcomp="$ac_aux_dir/depcomp" ++ AMDEPBACKSLASH='\' ++fi ++AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) ++AC_SUBST([AMDEPBACKSLASH]) ++]) ++m4trace:/usr/share/aclocal-1.9/depout.m4:14: -1- AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [for mf in $CONFIG_FILES; do ++ # Strip MF so we end up with the name of the file. ++ mf=`echo "$mf" | sed -e 's/:.*$//'` ++ # Check whether this is an Automake generated Makefile or not. ++ # We used to match only the files named `Makefile.in', but ++ # some people rename them; so instead we look at the file content. ++ # Grep'ing the first line is not enough: some people post-process ++ # each Makefile.in and add a new line on top of each file to say so. ++ # So let's grep whole file. ++ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then ++ dirpart=`AS_DIRNAME("$mf")` ++ else ++ continue ++ fi ++ # Extract the definition of DEPDIR, am__include, and am__quote ++ # from the Makefile without running `make'. ++ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` ++ test -z "$DEPDIR" && continue ++ am__include=`sed -n 's/^am__include = //p' < "$mf"` ++ test -z "am__include" && continue ++ am__quote=`sed -n 's/^am__quote = //p' < "$mf"` ++ # When using ansi2knr, U may be empty or an underscore; expand it ++ U=`sed -n 's/^U = //p' < "$mf"` ++ # Find all dependency output files, they are included files with ++ # $(DEPDIR) in their names. We invoke sed twice because it is the ++ # simplest approach to changing $(DEPDIR) to its actual value in the ++ # expansion. ++ for file in `sed -n " ++ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ ++ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do ++ # Make sure the directory exists. ++ test -f "$dirpart/$file" && continue ++ fdir=`AS_DIRNAME(["$file"])` ++ AS_MKDIR_P([$dirpart/$fdir]) ++ # echo "creating $dirpart/$file" ++ echo '# dummy' > "$dirpart/$file" ++ done ++done ++]) ++m4trace:/usr/share/aclocal-1.9/depout.m4:63: -1- AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], ++ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], ++ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ++]) ++m4trace:/usr/share/aclocal-1.9/header.m4:12: -1- AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) ++m4trace:/usr/share/aclocal-1.9/header.m4:12: -1- AC_DEFUN([AM_CONFIG_HEADER], [AC_DIAGNOSE([obsolete], [The macro `AM_CONFIG_HEADER' is obsolete. ++You should run autoupdate.])dnl ++AC_CONFIG_HEADERS($@)]) ++m4trace:/usr/share/aclocal-1.9/init.m4:26: -1- AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.58])dnl ++dnl Autoconf wants to disallow AM_ names. We explicitly allow ++dnl the ones we care about. ++m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl ++AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl ++AC_REQUIRE([AC_PROG_INSTALL])dnl ++# test to see if srcdir already configured ++if test "`cd $srcdir && pwd`" != "`pwd`" && ++ test -f $srcdir/config.status; then ++ AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) ++fi ++ ++# test whether we have cygpath ++if test -z "$CYGPATH_W"; then ++ if (cygpath --version) >/dev/null 2>/dev/null; then ++ CYGPATH_W='cygpath -w' ++ else ++ CYGPATH_W=echo ++ fi ++fi ++AC_SUBST([CYGPATH_W]) ++ ++# Define the identity of the package. ++dnl Distinguish between old-style and new-style calls. ++m4_ifval([$2], ++[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl ++ AC_SUBST([PACKAGE], [$1])dnl ++ AC_SUBST([VERSION], [$2])], ++[_AM_SET_OPTIONS([$1])dnl ++ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl ++ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl ++ ++_AM_IF_OPTION([no-define],, ++[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) ++ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl ++ ++# Some tools Automake needs. ++AC_REQUIRE([AM_SANITY_CHECK])dnl ++AC_REQUIRE([AC_ARG_PROGRAM])dnl ++AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) ++AM_MISSING_PROG(AUTOCONF, autoconf) ++AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) ++AM_MISSING_PROG(AUTOHEADER, autoheader) ++AM_MISSING_PROG(MAKEINFO, makeinfo) ++AM_PROG_INSTALL_SH ++AM_PROG_INSTALL_STRIP ++AC_REQUIRE([AM_PROG_MKDIR_P])dnl ++# We need awk for the "check" target. The system "awk" is bad on ++# some platforms. ++AC_REQUIRE([AC_PROG_AWK])dnl ++AC_REQUIRE([AC_PROG_MAKE_SET])dnl ++AC_REQUIRE([AM_SET_LEADING_DOT])dnl ++_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], ++ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], ++ [_AM_PROG_TAR([v7])])]) ++_AM_IF_OPTION([no-dependencies],, ++[AC_PROVIDE_IFELSE([AC_PROG_CC], ++ [_AM_DEPENDENCIES(CC)], ++ [define([AC_PROG_CC], ++ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl ++AC_PROVIDE_IFELSE([AC_PROG_CXX], ++ [_AM_DEPENDENCIES(CXX)], ++ [define([AC_PROG_CXX], ++ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl ++]) ++]) ++m4trace:/usr/share/aclocal-1.9/init.m4:102: -1- AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. ++_am_stamp_count=1 ++for _am_header in $config_headers :; do ++ case $_am_header in ++ $1 | $1:* ) ++ break ;; ++ * ) ++ _am_stamp_count=`expr $_am_stamp_count + 1` ;; ++ esac ++done ++echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) ++m4trace:/usr/share/aclocal-1.9/install-sh.m4:11: -1- AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ++install_sh=${install_sh-"$am_aux_dir/install-sh"} ++AC_SUBST(install_sh)]) ++m4trace:/usr/share/aclocal-1.9/lead-dot.m4:12: -1- AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null ++mkdir .tst 2>/dev/null ++if test -d .tst; then ++ am__leading_dot=. ++else ++ am__leading_dot=_ ++fi ++rmdir .tst 2>/dev/null ++AC_SUBST([am__leading_dot])]) ++m4trace:/usr/share/aclocal-1.9/make.m4:14: -1- AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} ++cat > confinc << 'END' ++am__doit: ++ @echo done ++.PHONY: am__doit ++END ++# If we don't find an include directive, just comment out the code. ++AC_MSG_CHECKING([for style of include used by $am_make]) ++am__include="#" ++am__quote= ++_am_result=none ++# First try GNU make style include. ++echo "include confinc" > confmf ++# We grep out `Entering directory' and `Leaving directory' ++# messages which can occur if `w' ends up in MAKEFLAGS. ++# In particular we don't look at `^make:' because GNU make might ++# be invoked under some other name (usually "gmake"), in which ++# case it prints its new name instead of `make'. ++if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then ++ am__include=include ++ am__quote= ++ _am_result=GNU ++fi ++# Now try BSD make style include. ++if test "$am__include" = "#"; then ++ echo '.include "confinc"' > confmf ++ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then ++ am__include=.include ++ am__quote="\"" ++ _am_result=BSD ++ fi ++fi ++AC_SUBST([am__include]) ++AC_SUBST([am__quote]) ++AC_MSG_RESULT([$_am_result]) ++rm -f confinc confmf ++]) ++m4trace:/usr/share/aclocal-1.9/minuso.m4:13: -1- AC_DEFUN([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC_C_O])dnl ++AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ++# FIXME: we rely on the cache variable name because ++# there is no other way. ++set dummy $CC ++ac_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']` ++if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" != yes"; then ++ # Losing compiler, so override with the script. ++ # FIXME: It is wrong to rewrite CC. ++ # But if we don't then we get into trouble of one sort or another. ++ # A longer-term fix would be to have automake use am__CC in this case, ++ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" ++ CC="$am_aux_dir/compile $CC" ++fi ++]) ++m4trace:/usr/share/aclocal-1.9/missing.m4:14: -1- AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) ++$1=${$1-"${am_missing_run}$2"} ++AC_SUBST($1)]) ++m4trace:/usr/share/aclocal-1.9/missing.m4:24: -1- AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ++test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" ++# Use eval to expand $SHELL ++if eval "$MISSING --run true"; then ++ am_missing_run="$MISSING --run " ++else ++ am_missing_run= ++ AC_MSG_WARN([`missing' script is too old or missing]) ++fi ++]) ++m4trace:/usr/share/aclocal-1.9/mkdirp.m4:30: -1- AC_DEFUN([AM_PROG_MKDIR_P], [if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then ++ # We used to keeping the `.' as first argument, in order to ++ # allow $(mkdir_p) to be used without argument. As in ++ # $(mkdir_p) $(somedir) ++ # where $(somedir) is conditionally defined. However this is wrong ++ # for two reasons: ++ # 1. if the package is installed by a user who cannot write `.' ++ # make install will fail, ++ # 2. the above comment should most certainly read ++ # $(mkdir_p) $(DESTDIR)$(somedir) ++ # so it does not work when $(somedir) is undefined and ++ # $(DESTDIR) is not. ++ # To support the latter case, we have to write ++ # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), ++ # so the `.' trick is pointless. ++ mkdir_p='mkdir -p --' ++else ++ # On NextStep and OpenStep, the `mkdir' command does not ++ # recognize any option. It will interpret all options as ++ # directories to create, and then abort because `.' already ++ # exists. ++ for d in ./-p ./--version; ++ do ++ test -d $d && rmdir $d ++ done ++ # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. ++ if test -f "$ac_aux_dir/mkinstalldirs"; then ++ mkdir_p='$(mkinstalldirs)' ++ else ++ mkdir_p='$(install_sh) -d' ++ fi ++fi ++AC_SUBST([mkdir_p])]) ++m4trace:/usr/share/aclocal-1.9/options.m4:13: -1- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) ++m4trace:/usr/share/aclocal-1.9/options.m4:19: -1- AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), 1)]) ++m4trace:/usr/share/aclocal-1.9/options.m4:25: -1- AC_DEFUN([_AM_SET_OPTIONS], [AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) ++m4trace:/usr/share/aclocal-1.9/options.m4:31: -1- AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) ++m4trace:/usr/share/aclocal-1.9/runlog.m4:12: -1- AC_DEFUN([AM_RUN_LOG], [{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD ++ ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD ++ (exit $ac_status); }]) ++m4trace:/usr/share/aclocal-1.9/sanity.m4:14: -1- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) ++# Just in case ++sleep 1 ++echo timestamp > conftest.file ++# Do `set' in a subshell so we don't clobber the current shell's ++# arguments. Must try -L first in case configure is actually a ++# symlink; some systems play weird games with the mod time of symlinks ++# (eg FreeBSD returns the mod time of the symlink's containing ++# directory). ++if ( ++ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` ++ if test "$[*]" = "X"; then ++ # -L didn't work. ++ set X `ls -t $srcdir/configure conftest.file` ++ fi ++ rm -f conftest.file ++ if test "$[*]" != "X $srcdir/configure conftest.file" \ ++ && test "$[*]" != "X conftest.file $srcdir/configure"; then ++ ++ # If neither matched, then we have a broken ls. This can happen ++ # if, for instance, CONFIG_SHELL is bash and it inherits a ++ # broken ls alias from the environment. This has actually ++ # happened. Such a system could not be considered "sane". ++ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken ++alias in your environment]) ++ fi ++ ++ test "$[2]" = conftest.file ++ ) ++then ++ # Ok. ++ : ++else ++ AC_MSG_ERROR([newly created file is older than distributed files! ++Check your system clock]) ++fi ++AC_MSG_RESULT(yes)]) ++m4trace:/usr/share/aclocal-1.9/strip.m4:17: -1- AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl ++# Installed binaries are usually stripped using `strip' when the user ++# run `make install-strip'. However `strip' might not be the right ++# tool to use in cross-compilation environments, therefore Automake ++# will honor the `STRIP' environment variable to overrule this program. ++dnl Don't test for $cross_compiling = yes, because it might be `maybe'. ++if test "$cross_compiling" != no; then ++ AC_CHECK_TOOL([STRIP], [strip], :) ++fi ++INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" ++AC_SUBST([INSTALL_STRIP_PROGRAM])]) ++m4trace:/usr/share/aclocal-1.9/tar.m4:24: -1- AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. ++AM_MISSING_PROG([AMTAR], [tar]) ++m4_if([$1], [v7], ++ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], ++ [m4_case([$1], [ustar],, [pax],, ++ [m4_fatal([Unknown tar format])]) ++AC_MSG_CHECKING([how to create a $1 tar archive]) ++# Loop over all known methods to create a tar archive until one works. ++_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' ++_am_tools=${am_cv_prog_tar_$1-$_am_tools} ++# Do not fold the above two line into one, because Tru64 sh and ++# Solaris sh will not grok spaces in the rhs of `-'. ++for _am_tool in $_am_tools ++do ++ case $_am_tool in ++ gnutar) ++ for _am_tar in tar gnutar gtar; ++ do ++ AM_RUN_LOG([$_am_tar --version]) && break ++ done ++ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' ++ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' ++ am__untar="$_am_tar -xf -" ++ ;; ++ plaintar) ++ # Must skip GNU tar: if it does not support --format= it doesn't create ++ # ustar tarball either. ++ (tar --version) >/dev/null 2>&1 && continue ++ am__tar='tar chf - "$$tardir"' ++ am__tar_='tar chf - "$tardir"' ++ am__untar='tar xf -' ++ ;; ++ pax) ++ am__tar='pax -L -x $1 -w "$$tardir"' ++ am__tar_='pax -L -x $1 -w "$tardir"' ++ am__untar='pax -r' ++ ;; ++ cpio) ++ am__tar='find "$$tardir" -print | cpio -o -H $1 -L' ++ am__tar_='find "$tardir" -print | cpio -o -H $1 -L' ++ am__untar='cpio -i -H $1 -d' ++ ;; ++ none) ++ am__tar=false ++ am__tar_=false ++ am__untar=false ++ ;; ++ esac ++ ++ # If the value was cached, stop now. We just wanted to have am__tar ++ # and am__untar set. ++ test -n "${am_cv_prog_tar_$1}" && break ++ ++ # tar/untar a dummy directory, and stop if the command works ++ rm -rf conftest.dir ++ mkdir conftest.dir ++ echo GrepMe > conftest.dir/file ++ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) ++ rm -rf conftest.dir ++ if test -s conftest.tar; then ++ AM_RUN_LOG([$am__untar /dev/null 2>&1 && break ++ fi ++done ++rm -rf conftest.dir ++ ++AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) ++AC_MSG_RESULT([$am_cv_prog_tar_$1])]) ++AC_SUBST([am__tar]) ++AC_SUBST([am__untar]) ++]) ++m4trace:m4/gnome-doc-utils.m4:3: -1- AC_DEFUN([GNOME_DOC_DEFINES], [ ++AC_ARG_WITH([help-dir], ++ AC_HELP_STRING([--with-help-dir=DIR], [path to help docs]),, ++ [with_help_dir='${datadir}/gnome/help']) ++HELP_DIR="$with_help_dir" ++AC_SUBST(HELP_DIR) ++ ++AC_ARG_WITH([omf-dir], ++ AC_HELP_STRING([--with-omf-dir=DIR], [path to OMF files]),, ++ [with_omf_dir='${datadir}/omf']) ++OMF_DIR="$with_omf_dir" ++AC_SUBST(OMF_DIR) ++ ++AC_ARG_WITH([help-formats], ++ AC_HELP_STRING([--with-help-formats=FORMATS], [list of formats]),, ++ [with_help_formats='']) ++DOC_USER_FORMATS="$with_help_formats" ++AC_SUBST(DOC_USER_FORMATS) ++ ++AC_ARG_ENABLE([scrollkeeper], ++ [AC_HELP_STRING([--disable-scrollkeeper], ++ [do not make updates to the scrollkeeper database])],, ++ enable_scrollkeeper=yes) ++AM_CONDITIONAL([ENABLE_SK],[test "$gdu_cv_have_gdu" = "yes" -a "$enable_scrollkeeper" = "yes"]) ++ ++dnl disable scrollkeeper automatically for distcheck ++DISTCHECK_CONFIGURE_FLAGS="--disable-scrollkeeper $DISTCHECK_CONFIGURE_FLAGS" ++AC_SUBST(DISTCHECK_CONFIGURE_FLAGS) ++ ++AM_CONDITIONAL([HAVE_GNOME_DOC_UTILS],[test "$gdu_cv_have_gdu" = "yes"]) ++]) ++m4trace:m4/gnome-doc-utils.m4:38: -1- AC_DEFUN([GNOME_DOC_INIT], [ ++ifelse([$1],,[gdu_cv_version_required=0.3.2],[gdu_cv_version_required=$1]) ++ ++PKG_CHECK_EXISTS([gnome-doc-utils >= $gdu_cv_version_required], ++ [gdu_cv_have_gdu=yes],[gdu_cv_have_gdu=no]) ++ ++if test "$gdu_cv_have_gdu" = "yes"; then ++ ifelse([$2],,[:],[$2]) ++else ++ ifelse([$3],,[AC_MSG_ERROR([gnome-doc-utils >= $gdu_cv_version_required not found])],[$3]) ++fi ++ ++GNOME_DOC_DEFINES ++]) ++m4trace:m4/intltool.m4:27: -1- AC_DEFUN([IT_PROG_INTLTOOL], [AC_PREREQ([2.50])dnl ++ ++case "$am__api_version" in ++ 1.[01234]) ++ AC_MSG_ERROR([Automake 1.5 or newer is required to use intltool]) ++ ;; ++ *) ++ ;; ++esac ++ ++if test -n "$1"; then ++ AC_MSG_CHECKING([for intltool >= $1]) ++ ++ INTLTOOL_REQUIRED_VERSION_AS_INT=`echo $1 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` ++ INTLTOOL_APPLIED_VERSION=`awk -F\" '/\\$VERSION / { print $ 2; }' ${ac_aux_dir}/intltool-update.in` ++ [INTLTOOL_APPLIED_VERSION_AS_INT=`awk -F\" '/\\$VERSION / { split($ 2, VERSION, "."); print VERSION[1] * 1000 + VERSION[2] * 100 + VERSION[3];}' ${ac_aux_dir}/intltool-update.in` ++ ] ++ AC_MSG_RESULT([$INTLTOOL_APPLIED_VERSION found]) ++ test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || ++ AC_MSG_ERROR([Your intltool is too old. You need intltool $1 or later.]) ++fi ++ ++ INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -p $(top_srcdir)/po $< [$]@' ++ INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u /tmp $< [$]@' ++ INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ ++AC_SUBST(INTLTOOL_DESKTOP_RULE) ++AC_SUBST(INTLTOOL_DIRECTORY_RULE) ++AC_SUBST(INTLTOOL_KEYS_RULE) ++AC_SUBST(INTLTOOL_PROP_RULE) ++AC_SUBST(INTLTOOL_OAF_RULE) ++AC_SUBST(INTLTOOL_PONG_RULE) ++AC_SUBST(INTLTOOL_SERVER_RULE) ++AC_SUBST(INTLTOOL_SHEET_RULE) ++AC_SUBST(INTLTOOL_SOUNDLIST_RULE) ++AC_SUBST(INTLTOOL_UI_RULE) ++AC_SUBST(INTLTOOL_XAM_RULE) ++AC_SUBST(INTLTOOL_KBD_RULE) ++AC_SUBST(INTLTOOL_XML_RULE) ++AC_SUBST(INTLTOOL_XML_NOMERGE_RULE) ++AC_SUBST(INTLTOOL_CAVES_RULE) ++AC_SUBST(INTLTOOL_SCHEMAS_RULE) ++AC_SUBST(INTLTOOL_THEME_RULE) ++AC_SUBST(INTLTOOL_SERVICE_RULE) ++AC_SUBST(INTLTOOL_POLICY_RULE) ++ ++# Check the gettext tools to make sure they are GNU ++AC_PATH_PROG(XGETTEXT, xgettext) ++AC_PATH_PROG(MSGMERGE, msgmerge) ++AC_PATH_PROG(MSGFMT, msgfmt) ++if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then ++ AC_MSG_ERROR([GNU gettext tools not found; required for intltool]) ++fi ++xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" ++mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" ++mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" ++if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then ++ AC_MSG_ERROR([GNU gettext tools not found; required for intltool]) ++fi ++ ++# Use the tools built into the package, not the ones that are installed. ++AC_SUBST(INTLTOOL_EXTRACT, '$(top_builddir)/intltool-extract') ++AC_SUBST(INTLTOOL_MERGE, '$(top_builddir)/intltool-merge') ++AC_SUBST(INTLTOOL_UPDATE, '$(top_builddir)/intltool-update') ++ ++AC_PATH_PROG(INTLTOOL_PERL, perl) ++if test -z "$INTLTOOL_PERL"; then ++ AC_MSG_ERROR([perl not found; required for intltool]) ++fi ++if test -z "`$INTLTOOL_PERL -v | fgrep '5.' 2> /dev/null`"; then ++ AC_MSG_ERROR([perl 5.x required for intltool]) ++fi ++if test "x$2" != "xno-xml"; then ++ AC_MSG_CHECKING([for XML::Parser]) ++ if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then ++ AC_MSG_RESULT([ok]) ++ else ++ AC_MSG_ERROR([XML::Parser perl module is required for intltool]) ++ fi ++fi ++ ++# Substitute ALL_LINGUAS so we can use it in po/Makefile ++AC_SUBST(ALL_LINGUAS) ++ ++# Set DATADIRNAME correctly if it is not set yet ++# (copied from glib-gettext.m4) ++if test -z "$DATADIRNAME"; then ++ AC_LINK_IFELSE( ++ [AC_LANG_PROGRAM([[]], ++ [[extern int _nl_msg_cat_cntr; ++ return _nl_msg_cat_cntr]])], ++ [DATADIRNAME=share], ++ [case $host in ++ *-*-solaris*) ++ dnl On Solaris, if bind_textdomain_codeset is in libc, ++ dnl GNU format message catalog is always supported, ++ dnl since both are added to the libc all together. ++ dnl Hence, we'd like to go with DATADIRNAME=share ++ dnl in this case. ++ AC_CHECK_FUNC(bind_textdomain_codeset, ++ [DATADIRNAME=share], [DATADIRNAME=lib]) ++ ;; ++ *) ++ [DATADIRNAME=lib] ++ ;; ++ esac]) ++fi ++AC_SUBST(DATADIRNAME) ++ ++IT_PO_SUBDIR([po]) ++ ++dnl The following is very similar to ++dnl ++dnl AC_CONFIG_FILES([intltool-extract intltool-merge intltool-update]) ++dnl ++dnl with the following slight differences: ++dnl - the *.in files are in ac_aux_dir, ++dnl - if the file haven't changed upon reconfigure, it's not touched, ++dnl - the evaluation of the third parameter enables a hack which computes ++dnl the actual value of $libdir, ++dnl - the user sees "executing intltool commands", instead of ++dnl "creating intltool-extract" and such. ++dnl ++dnl Nothing crucial here, and we could use AC_CONFIG_FILES, if there were ++dnl a reason for it. ++ ++AC_CONFIG_COMMANDS([intltool], [ ++ ++for file in intltool-extract intltool-merge intltool-update; do ++ sed -e "s|@INTLTOOL_EXTRACT@|`pwd`/intltool-extract|g" \ ++ -e "s|@INTLTOOL_LIBDIR@|${INTLTOOL_LIBDIR}|g" \ ++ -e "s|@INTLTOOL_PERL@|${INTLTOOL_PERL}|g" \ ++ < ${ac_aux_dir}/${file}.in > ${file}.out ++ if cmp -s ${file} ${file}.out 2>/dev/null; then ++ rm -f ${file}.out ++ else ++ mv -f ${file}.out ${file} ++ fi ++ chmod ugo+x ${file} ++ chmod u+w ${file} ++done ++ ++], ++[INTLTOOL_PERL='${INTLTOOL_PERL}' ac_aux_dir='${ac_aux_dir}' ++prefix="$prefix" exec_prefix="$exec_prefix" INTLTOOL_LIBDIR="$libdir" ++INTLTOOL_EXTRACT='${INTLTOOL_EXTRACT}']) ++ ++]) ++m4trace:m4/intltool.m4:199: -1- AC_DEFUN([IT_PO_SUBDIR], [AC_PREREQ([2.53])dnl We use ac_top_srcdir inside AC_CONFIG_COMMANDS. ++dnl ++dnl The following CONFIG_COMMANDS should be exetuted at the very end ++dnl of config.status. ++AC_CONFIG_COMMANDS_PRE([ ++ AC_CONFIG_COMMANDS([$1/stamp-it], [ ++ rm -f "$1/stamp-it" "$1/stamp-it.tmp" "$1/POTFILES" "$1/Makefile.tmp" ++ >"$1/stamp-it.tmp" ++ [sed '/^#/d ++ s/^[[].*] *// ++ /^[ ]*$/d ++ '"s|^| $ac_top_srcdir/|" \ ++ "$srcdir/$1/POTFILES.in" | sed '$!s/$/ \\/' >"$1/POTFILES" ++ ] ++ if test ! -f "$1/Makefile"; then ++ AC_MSG_ERROR([$1/Makefile is not ready.]) ++ fi ++ mv "$1/Makefile" "$1/Makefile.tmp" ++ [sed '/^POTFILES =/,/[^\\]$/ { ++ /^POTFILES =/!d ++ r $1/POTFILES ++ } ++ ' "$1/Makefile.tmp" >"$1/Makefile"] ++ rm -f "$1/Makefile.tmp" ++ mv "$1/stamp-it.tmp" "$1/stamp-it" ++ ]) ++])dnl ++]) ++m4trace:m4/intltool.m4:231: -1- AU_DEFUN([AC_PROG_INTLTOOL], [m4_if($#, 0, [IT_PROG_INTLTOOL], [IT_PROG_INTLTOOL($@)])]) ++m4trace:m4/intltool.m4:231: -1- AC_DEFUN([AC_PROG_INTLTOOL], [AC_DIAGNOSE([obsolete], [The macro `AC_PROG_INTLTOOL' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [IT_PROG_INTLTOOL], [IT_PROG_INTLTOOL($@)])]) ++m4trace:configure.ac:3: -1- m4_pattern_forbid([^_?A[CHUM]_]) ++m4trace:configure.ac:3: -1- m4_pattern_forbid([_AC_]) ++m4trace:configure.ac:3: -1- m4_pattern_forbid([^LIBOBJS$], [do not use LIBOBJS directly, use AC_LIBOBJ (see section `AC_LIBOBJ vs LIBOBJS']) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^AS_FLAGS$]) ++m4trace:configure.ac:3: -1- m4_pattern_forbid([^_?m4_]) ++m4trace:configure.ac:3: -1- m4_pattern_forbid([^dnl$]) ++m4trace:configure.ac:3: -1- m4_pattern_forbid([^_?AS_]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^SHELL$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PATH_SEPARATOR$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE_NAME$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE_TARNAME$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE_VERSION$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE_STRING$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^exec_prefix$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^prefix$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^program_transform_name$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^bindir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^sbindir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^libexecdir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^datarootdir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^datadir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^sysconfdir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^sharedstatedir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^localstatedir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^includedir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^oldincludedir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^docdir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^infodir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^htmldir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^dvidir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^pdfdir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^psdir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^libdir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^localedir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^mandir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE_NAME$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE_TARNAME$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE_VERSION$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE_STRING$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^DEFS$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^ECHO_C$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^ECHO_N$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^ECHO_T$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^LIBS$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^build_alias$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^host_alias$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^target_alias$]) ++m4trace:configure.ac:5: -1- AM_INIT_AUTOMAKE([gnome-power-manager], [2.24.0]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^AM_[A-Z]+FLAGS$]) ++m4trace:configure.ac:5: -1- AM_SET_CURRENT_AUTOMAKE_VERSION ++m4trace:configure.ac:5: -1- AM_AUTOMAKE_VERSION([1.9.6]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^INSTALL_PROGRAM$]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^INSTALL_SCRIPT$]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^INSTALL_DATA$]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^CYGPATH_W$]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^PACKAGE$]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^VERSION$]) ++m4trace:configure.ac:5: -1- _AM_IF_OPTION([no-define], [], [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) ++ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])]) ++m4trace:configure.ac:5: -2- _AM_MANGLE_OPTION([no-define]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^PACKAGE$]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^VERSION$]) ++m4trace:configure.ac:5: -1- AM_SANITY_CHECK ++m4trace:configure.ac:5: -1- AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) ++m4trace:configure.ac:5: -1- AM_MISSING_HAS_RUN ++m4trace:configure.ac:5: -1- AM_AUX_DIR_EXPAND ++m4trace:configure.ac:5: -1- m4_pattern_allow([^ACLOCAL$]) ++m4trace:configure.ac:5: -1- AM_MISSING_PROG([AUTOCONF], [autoconf]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^AUTOCONF$]) ++m4trace:configure.ac:5: -1- AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^AUTOMAKE$]) ++m4trace:configure.ac:5: -1- AM_MISSING_PROG([AUTOHEADER], [autoheader]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^AUTOHEADER$]) ++m4trace:configure.ac:5: -1- AM_MISSING_PROG([MAKEINFO], [makeinfo]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^MAKEINFO$]) ++m4trace:configure.ac:5: -1- AM_PROG_INSTALL_SH ++m4trace:configure.ac:5: -1- m4_pattern_allow([^install_sh$]) ++m4trace:configure.ac:5: -1- AM_PROG_INSTALL_STRIP ++m4trace:configure.ac:5: -1- m4_pattern_allow([^STRIP$]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^INSTALL_STRIP_PROGRAM$]) ++m4trace:configure.ac:5: -1- AM_PROG_MKDIR_P ++m4trace:configure.ac:5: -1- m4_pattern_allow([^mkdir_p$]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^AWK$]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^SET_MAKE$]) ++m4trace:configure.ac:5: -1- AM_SET_LEADING_DOT ++m4trace:configure.ac:5: -1- m4_pattern_allow([^am__leading_dot$]) ++m4trace:configure.ac:5: -1- _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], ++ [_AM_PROG_TAR([v7])])]) ++m4trace:configure.ac:5: -2- _AM_MANGLE_OPTION([tar-ustar]) ++m4trace:configure.ac:5: -1- _AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])]) ++m4trace:configure.ac:5: -2- _AM_MANGLE_OPTION([tar-pax]) ++m4trace:configure.ac:5: -1- _AM_PROG_TAR([v7]) ++m4trace:configure.ac:5: -1- AM_MISSING_PROG([AMTAR], [tar]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^AMTAR$]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^am__tar$]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^am__untar$]) ++m4trace:configure.ac:5: -1- _AM_IF_OPTION([no-dependencies], [], [AC_PROVIDE_IFELSE([AC_PROG_CC], ++ [_AM_DEPENDENCIES(CC)], ++ [define([AC_PROG_CC], ++ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl ++AC_PROVIDE_IFELSE([AC_PROG_CXX], ++ [_AM_DEPENDENCIES(CXX)], ++ [define([AC_PROG_CXX], ++ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl ++]) ++m4trace:configure.ac:5: -2- _AM_MANGLE_OPTION([no-dependencies]) ++m4trace:configure.ac:6: -1- AM_CONFIG_HEADER([config.h]) ++m4trace:configure.ac:6: -1- _m4_warn([obsolete], [The macro `AM_CONFIG_HEADER' is obsolete. ++You should run autoupdate.], [/usr/share/aclocal-1.9/header.m4:12: AM_CONFIG_HEADER is expanded from... ++configure.ac:6: the top level]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^CC$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^CFLAGS$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^LDFLAGS$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^LIBS$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^CPPFLAGS$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^CC$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^CC$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^CC$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^CC$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^ac_ct_CC$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^EXEEXT$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^OBJEXT$]) ++m4trace:configure.ac:9: -1- _AM_DEPENDENCIES([CC]) ++m4trace:configure.ac:9: -1- AM_SET_DEPDIR ++m4trace:configure.ac:9: -1- m4_pattern_allow([^DEPDIR$]) ++m4trace:configure.ac:9: -1- AM_OUTPUT_DEPENDENCY_COMMANDS ++m4trace:configure.ac:9: -1- AM_MAKE_INCLUDE ++m4trace:configure.ac:9: -1- m4_pattern_allow([^am__include$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^am__quote$]) ++m4trace:configure.ac:9: -1- AM_DEP_TRACK ++m4trace:configure.ac:9: -1- AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^AMDEP_TRUE$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^AMDEP_FALSE$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^AMDEPBACKSLASH$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^CCDEPMODE$]) ++m4trace:configure.ac:9: -1- AM_CONDITIONAL([am__fastdepCC], [ ++ test "x$enable_dependency_tracking" != xno \ ++ && test "$am_cv_CC_dependencies_compiler_type" = gcc3]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^am__fastdepCC_TRUE$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^am__fastdepCC_FALSE$]) ++m4trace:configure.ac:10: -1- AM_PROG_CC_C_O ++m4trace:configure.ac:10: -1- m4_pattern_allow([^NO_MINUS_C_MINUS_O$]) ++m4trace:configure.ac:12: -1- m4_pattern_allow([^INSTALL_PROGRAM$]) ++m4trace:configure.ac:12: -1- m4_pattern_allow([^INSTALL_SCRIPT$]) ++m4trace:configure.ac:12: -1- m4_pattern_allow([^INSTALL_DATA$]) ++m4trace:configure.ac:13: -1- AM_PROG_LIBTOOL ++m4trace:configure.ac:13: -1- _m4_warn([obsolete], [The macro `AM_PROG_LIBTOOL' is obsolete. ++You should run autoupdate.], [/usr/share/aclocal/libtool.m4:103: AM_PROG_LIBTOOL is expanded from... ++configure.ac:13: the top level]) ++m4trace:configure.ac:13: -1- LT_INIT ++m4trace:configure.ac:13: -1- m4_pattern_forbid([^_?LT_[A-Z_]+$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$]) ++m4trace:configure.ac:13: -1- LTOPTIONS_VERSION ++m4trace:configure.ac:13: -1- LTSUGAR_VERSION ++m4trace:configure.ac:13: -1- LTVERSION_VERSION ++m4trace:configure.ac:13: -1- LTOBSOLETE_VERSION ++m4trace:configure.ac:13: -1- _LT_PROG_LTMAIN ++m4trace:configure.ac:13: -1- m4_pattern_allow([^LIBTOOL$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^build$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^build_cpu$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^build_vendor$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^build_os$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^host$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^host_cpu$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^host_vendor$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^host_os$]) ++m4trace:configure.ac:13: -1- LT_PATH_LD ++m4trace:configure.ac:13: -1- m4_pattern_allow([^SED$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^SED$]) ++m4trace:configure.ac:13: -1- AC_PROG_EGREP ++m4trace:configure.ac:13: -1- m4_pattern_allow([^GREP$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^GREP$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^EGREP$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^EGREP$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^FGREP$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^FGREP$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^GREP$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^LD$]) ++m4trace:configure.ac:13: -1- LT_PATH_NM ++m4trace:configure.ac:13: -1- m4_pattern_allow([^DUMPBIN$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^ac_ct_DUMPBIN$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^DUMPBIN$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^NM$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^LN_S$]) ++m4trace:configure.ac:13: -1- LT_CMD_MAX_LEN ++m4trace:configure.ac:13: -1- m4_pattern_allow([^AR$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^STRIP$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^RANLIB$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([LT_OBJDIR]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^LT_OBJDIR$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^lt_ECHO$]) ++m4trace:configure.ac:13: -1- _LT_CC_BASENAME([$compiler]) ++m4trace:configure.ac:13: -1- _LT_PATH_TOOL_PREFIX([${ac_tool_prefix}file], [/usr/bin$PATH_SEPARATOR$PATH]) ++m4trace:configure.ac:13: -1- _LT_PATH_TOOL_PREFIX([file], [/usr/bin$PATH_SEPARATOR$PATH]) ++m4trace:configure.ac:13: -1- LT_SUPPORTED_TAG([CC]) ++m4trace:configure.ac:13: -1- _LT_COMPILER_BOILERPLATE ++m4trace:configure.ac:13: -1- _LT_LINKER_BOILERPLATE ++m4trace:configure.ac:13: -1- _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], [lt_cv_prog_compiler_rtti_exceptions], [-fno-rtti -fno-exceptions], [], [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, )="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, ) -fno-rtti -fno-exceptions"]) ++m4trace:configure.ac:13: -1- _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, ) works], [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, )], [$_LT_TAGVAR(lt_prog_compiler_pic, )@&t@m4_if([],[],[ -DPIC],[m4_if([],[CXX],[ -DPIC],[])])], [], [case $_LT_TAGVAR(lt_prog_compiler_pic, ) in ++ "" | " "*) ;; ++ *) _LT_TAGVAR(lt_prog_compiler_pic, )=" $_LT_TAGVAR(lt_prog_compiler_pic, )" ;; ++ esac], [_LT_TAGVAR(lt_prog_compiler_pic, )= ++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, )=no]) ++m4trace:configure.ac:13: -1- _LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], [lt_cv_prog_compiler_static_works], [$lt_tmp_static_flag], [], [_LT_TAGVAR(lt_prog_compiler_static, )=]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^DSYMUTIL$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^NMEDIT$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^LIPO$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^OTOOL$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^OTOOL64$]) ++m4trace:configure.ac:13: -1- LT_SYS_DLOPEN_SELF ++m4trace:configure.ac:13: -1- m4_pattern_allow([^CPP$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^CPPFLAGS$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^CPP$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^STDC_HEADERS$]) ++m4trace:configure.ac:14: -1- IT_PROG_INTLTOOL([0.35.0]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_DESKTOP_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_DIRECTORY_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_KEYS_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_PROP_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_OAF_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_PONG_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_SERVER_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_SHEET_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_SOUNDLIST_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_UI_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_XAM_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_KBD_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_XML_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_XML_NOMERGE_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_CAVES_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_SCHEMAS_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_THEME_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_SERVICE_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_POLICY_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^XGETTEXT$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^MSGMERGE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^MSGFMT$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_EXTRACT$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_MERGE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_UPDATE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_PERL$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^ALL_LINGUAS$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^DATADIRNAME$]) ++m4trace:configure.ac:14: -1- IT_PO_SUBDIR([po]) ++m4trace:configure.ac:16: -1- GNOME_COMPILE_WARNINGS ++m4trace:configure.ac:16: -2- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from... ++/usr/share/aclocal/gnome-compiler-flags.m4:4: GNOME_COMPILE_WARNINGS is expanded from... ++configure.ac:16: the top level]) ++m4trace:configure.ac:16: -1- _m4_warn([obsolete], [The macro `AC_TRY_COMPILE' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:2367: AC_TRY_COMPILE is expanded from... ++/usr/share/aclocal/gnome-compiler-flags.m4:4: GNOME_COMPILE_WARNINGS is expanded from... ++configure.ac:16: the top level]) ++m4trace:configure.ac:16: -2- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from... ++/usr/share/aclocal/gnome-compiler-flags.m4:4: GNOME_COMPILE_WARNINGS is expanded from... ++configure.ac:16: the top level]) ++m4trace:configure.ac:16: -1- m4_pattern_allow([^WARN_CFLAGS$]) ++m4trace:configure.ac:17: -1- GNOME_DOC_INIT ++m4trace:configure.ac:17: -1- PKG_CHECK_EXISTS([gnome-doc-utils >= $gdu_cv_version_required], [gdu_cv_have_gdu=yes], [gdu_cv_have_gdu=no]) ++m4trace:configure.ac:17: -1- PKG_PROG_PKG_CONFIG ++m4trace:configure.ac:17: -1- m4_pattern_forbid([^_?PKG_[A-Z_]+$]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^PKG_CONFIG$]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^PKG_CONFIG$]) ++m4trace:configure.ac:17: -1- GNOME_DOC_DEFINES ++m4trace:configure.ac:17: -2- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from... ++m4/gnome-doc-utils.m4:3: GNOME_DOC_DEFINES is expanded from... ++m4/gnome-doc-utils.m4:38: GNOME_DOC_INIT is expanded from... ++configure.ac:17: the top level]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^HELP_DIR$]) ++m4trace:configure.ac:17: -2- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from... ++m4/gnome-doc-utils.m4:3: GNOME_DOC_DEFINES is expanded from... ++m4/gnome-doc-utils.m4:38: GNOME_DOC_INIT is expanded from... ++configure.ac:17: the top level]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^OMF_DIR$]) ++m4trace:configure.ac:17: -2- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from... ++m4/gnome-doc-utils.m4:3: GNOME_DOC_DEFINES is expanded from... ++m4/gnome-doc-utils.m4:38: GNOME_DOC_INIT is expanded from... ++configure.ac:17: the top level]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^DOC_USER_FORMATS$]) ++m4trace:configure.ac:17: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from... ++../../lib/autoconf/general.m4:1364: AC_ARG_ENABLE is expanded from... ++m4/gnome-doc-utils.m4:3: GNOME_DOC_DEFINES is expanded from... ++m4/gnome-doc-utils.m4:38: GNOME_DOC_INIT is expanded from... ++configure.ac:17: the top level]) ++m4trace:configure.ac:17: -1- AM_CONDITIONAL([ENABLE_SK], [test "$gdu_cv_have_gdu" = "yes" -a "$enable_scrollkeeper" = "yes"]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^ENABLE_SK_TRUE$]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^ENABLE_SK_FALSE$]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^DISTCHECK_CONFIGURE_FLAGS$]) ++m4trace:configure.ac:17: -1- AM_CONDITIONAL([HAVE_GNOME_DOC_UTILS], [test "$gdu_cv_have_gdu" = "yes"]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^HAVE_GNOME_DOC_UTILS_TRUE$]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^HAVE_GNOME_DOC_UTILS_FALSE$]) ++m4trace:configure.ac:19: -1- m4_pattern_allow([^GLIB_GENMARSHAL$]) ++m4trace:configure.ac:45: -1- m4_pattern_allow([^GETTEXT_PACKAGE$]) ++m4trace:configure.ac:46: -1- m4_pattern_allow([^GETTEXT_PACKAGE$]) ++m4trace:configure.ac:48: -1- AM_GLIB_GNU_GETTEXT ++m4trace:configure.ac:48: -1- _m4_warn([obsolete], [The macro `AC_TRY_LINK' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:2414: AC_TRY_LINK is expanded from... ++../../lib/m4sugar/m4sh.m4:516: AS_IF is expanded from... ++../../lib/autoconf/general.m4:1898: AC_CACHE_VAL is expanded from... ++../../lib/autoconf/general.m4:1911: AC_CACHE_CHECK is expanded from... ++/usr/share/aclocal/glib-gettext.m4:48: GLIB_LC_MESSAGES is expanded from... ++/usr/share/aclocal/glib-gettext.m4:312: GLIB_GNU_GETTEXT is expanded from... ++/usr/share/aclocal/glib-gettext.m4:412: AM_GLIB_GNU_GETTEXT is expanded from... ++configure.ac:48: the top level]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^HAVE_LC_MESSAGES$]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^USE_NLS$]) ++m4trace:configure.ac:48: -1- _m4_warn([obsolete], [The macro `AC_TRY_LINK' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:2414: AC_TRY_LINK is expanded from... ++../../lib/m4sugar/m4sh.m4:516: AS_IF is expanded from... ++../../lib/autoconf/general.m4:1898: AC_CACHE_VAL is expanded from... ++../../lib/autoconf/general.m4:1911: AC_CACHE_CHECK is expanded from... ++../../lib/m4sugar/m4sh.m4:516: AS_IF is expanded from... ++../../lib/autoconf/headers.m4:87: AC_CHECK_HEADER is expanded from... ++/usr/share/aclocal/glib-gettext.m4:102: GLIB_WITH_NLS is expanded from... ++/usr/share/aclocal/glib-gettext.m4:312: GLIB_GNU_GETTEXT is expanded from... ++/usr/share/aclocal/glib-gettext.m4:412: AM_GLIB_GNU_GETTEXT is expanded from... ++configure.ac:48: the top level]) ++m4trace:configure.ac:48: -1- _m4_warn([obsolete], [The macro `AC_TRY_LINK' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:2414: AC_TRY_LINK is expanded from... ++../../lib/m4sugar/m4sh.m4:516: AS_IF is expanded from... ++../../lib/autoconf/general.m4:1898: AC_CACHE_VAL is expanded from... ++../../lib/autoconf/general.m4:1911: AC_CACHE_CHECK is expanded from... ++../../lib/m4sugar/m4sh.m4:516: AS_IF is expanded from... ++../../lib/autoconf/headers.m4:87: AC_CHECK_HEADER is expanded from... ++/usr/share/aclocal/glib-gettext.m4:102: GLIB_WITH_NLS is expanded from... ++/usr/share/aclocal/glib-gettext.m4:312: GLIB_GNU_GETTEXT is expanded from... ++/usr/share/aclocal/glib-gettext.m4:412: AM_GLIB_GNU_GETTEXT is expanded from... ++configure.ac:48: the top level]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^HAVE_GETTEXT$]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^MSGFMT$]) ++m4trace:configure.ac:48: -1- GLIB_RUN_PROG([$MSGFMT -c -o /dev/null], [ ++msgid "" ++msgstr "" ++"Content-Type: text/plain; charset=UTF-8\n" ++"Project-Id-Version: test 1.0\n" ++"PO-Revision-Date: 2007-02-15 12:01+0100\n" ++"Last-Translator: test \n" ++"Language-Team: C \n" ++"MIME-Version: 1.0\n" ++"Content-Transfer-Encoding: 8bit\n" ++], [MSGFMT_OPTS=-c; AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no])]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^MSGFMT_OPTS$]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^GMSGFMT$]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^XGETTEXT$]) ++m4trace:configure.ac:48: -1- _m4_warn([obsolete], [The macro `AC_TRY_LINK' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:2414: AC_TRY_LINK is expanded from... ++../../lib/m4sugar/m4sh.m4:516: AS_IF is expanded from... ++../../lib/autoconf/headers.m4:87: AC_CHECK_HEADER is expanded from... ++/usr/share/aclocal/glib-gettext.m4:102: GLIB_WITH_NLS is expanded from... ++/usr/share/aclocal/glib-gettext.m4:312: GLIB_GNU_GETTEXT is expanded from... ++/usr/share/aclocal/glib-gettext.m4:412: AM_GLIB_GNU_GETTEXT is expanded from... ++configure.ac:48: the top level]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^ENABLE_NLS$]) ++m4trace:configure.ac:48: -1- _m4_warn([obsolete], [The macro `AC_OUTPUT_COMMANDS' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/status.m4:848: AC_OUTPUT_COMMANDS is expanded from... ++/usr/share/aclocal/glib-gettext.m4:102: GLIB_WITH_NLS is expanded from... ++/usr/share/aclocal/glib-gettext.m4:312: GLIB_GNU_GETTEXT is expanded from... ++/usr/share/aclocal/glib-gettext.m4:412: AM_GLIB_GNU_GETTEXT is expanded from... ++configure.ac:48: the top level]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^CATALOGS$]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^CATOBJEXT$]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^DATADIRNAME$]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^GMOFILES$]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^INSTOBJEXT$]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^INTLLIBS$]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^PO_IN_DATADIR_TRUE$]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^PO_IN_DATADIR_FALSE$]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^POFILES$]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^POSUB$]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^MKINSTALLDIRS$]) ++m4trace:configure.ac:74: -1- m4_pattern_allow([^GLIB_REQUIRED$]) ++m4trace:configure.ac:75: -1- m4_pattern_allow([^GTK_REQUIRED$]) ++m4trace:configure.ac:76: -1- m4_pattern_allow([^GDK_REQUIRED$]) ++m4trace:configure.ac:77: -1- m4_pattern_allow([^LIBGNOME_REQUIRED$]) ++m4trace:configure.ac:78: -1- m4_pattern_allow([^LIBGNOMEUI_REQUIRED$]) ++m4trace:configure.ac:79: -1- m4_pattern_allow([^HAL_REQUIRED$]) ++m4trace:configure.ac:80: -1- m4_pattern_allow([^DBUS_REQUIRED$]) ++m4trace:configure.ac:81: -1- m4_pattern_allow([^LIBGLADE_REQUIRED$]) ++m4trace:configure.ac:82: -1- m4_pattern_allow([^LIBNOTIFY_REQUIRED$]) ++m4trace:configure.ac:83: -1- m4_pattern_allow([^LIBWNCK_REQUIRED$]) ++m4trace:configure.ac:84: -1- m4_pattern_allow([^CAIRO_REQUIRED$]) ++m4trace:configure.ac:85: -1- m4_pattern_allow([^UNIQUE_REQUIRED$]) ++m4trace:configure.ac:86: -1- m4_pattern_allow([^LIBPANEL_REQUIRED$]) ++m4trace:configure.ac:87: -1- m4_pattern_allow([^GSTREAMER_REQUIRED$]) ++m4trace:configure.ac:88: -1- m4_pattern_allow([^XRANDR_REQUIRED$]) ++m4trace:configure.ac:89: -1- m4_pattern_allow([^POLKIT_GNOME_REQUIRED$]) ++m4trace:configure.ac:94: -1- PKG_CHECK_MODULES([GLIB], [glib-2.0 >= $GLIB_REQUIRED gobject-2.0]) ++m4trace:configure.ac:94: -1- m4_pattern_allow([^GLIB_CFLAGS$]) ++m4trace:configure.ac:94: -1- m4_pattern_allow([^GLIB_LIBS$]) ++m4trace:configure.ac:94: -1- PKG_CHECK_EXISTS([glib-2.0 >= $GLIB_REQUIRED gobject-2.0], [pkg_cv_[]GLIB_CFLAGS=`$PKG_CONFIG --[]cflags "glib-2.0 >= $GLIB_REQUIRED gobject-2.0" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:94: -1- PKG_CHECK_EXISTS([glib-2.0 >= $GLIB_REQUIRED gobject-2.0], [pkg_cv_[]GLIB_LIBS=`$PKG_CONFIG --[]libs "glib-2.0 >= $GLIB_REQUIRED gobject-2.0" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:94: -1- _PKG_SHORT_ERRORS_SUPPORTED ++m4trace:configure.ac:95: -1- m4_pattern_allow([^GLIB_CFLAGS$]) ++m4trace:configure.ac:96: -1- m4_pattern_allow([^GLIB_LIBS$]) ++m4trace:configure.ac:98: -1- PKG_CHECK_MODULES([HAL], [hal >= $HAL_REQUIRED]) ++m4trace:configure.ac:98: -1- m4_pattern_allow([^HAL_CFLAGS$]) ++m4trace:configure.ac:98: -1- m4_pattern_allow([^HAL_LIBS$]) ++m4trace:configure.ac:98: -1- PKG_CHECK_EXISTS([hal >= $HAL_REQUIRED], [pkg_cv_[]HAL_CFLAGS=`$PKG_CONFIG --[]cflags "hal >= $HAL_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:98: -1- PKG_CHECK_EXISTS([hal >= $HAL_REQUIRED], [pkg_cv_[]HAL_LIBS=`$PKG_CONFIG --[]libs "hal >= $HAL_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:98: -1- _PKG_SHORT_ERRORS_SUPPORTED ++m4trace:configure.ac:99: -1- m4_pattern_allow([^HAL_CFLAGS$]) ++m4trace:configure.ac:100: -1- m4_pattern_allow([^HAL_LIBS$]) ++m4trace:configure.ac:102: -1- PKG_CHECK_MODULES([GSTREAMER], [gstreamer-0.10 >= $GSTREAMER_REQUIRED]) ++m4trace:configure.ac:102: -1- m4_pattern_allow([^GSTREAMER_CFLAGS$]) ++m4trace:configure.ac:102: -1- m4_pattern_allow([^GSTREAMER_LIBS$]) ++m4trace:configure.ac:102: -1- PKG_CHECK_EXISTS([gstreamer-0.10 >= $GSTREAMER_REQUIRED], [pkg_cv_[]GSTREAMER_CFLAGS=`$PKG_CONFIG --[]cflags "gstreamer-0.10 >= $GSTREAMER_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:102: -1- PKG_CHECK_EXISTS([gstreamer-0.10 >= $GSTREAMER_REQUIRED], [pkg_cv_[]GSTREAMER_LIBS=`$PKG_CONFIG --[]libs "gstreamer-0.10 >= $GSTREAMER_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:102: -1- _PKG_SHORT_ERRORS_SUPPORTED ++m4trace:configure.ac:103: -1- m4_pattern_allow([^GSTREAMER_CFLAGS$]) ++m4trace:configure.ac:104: -1- m4_pattern_allow([^GSTREAMER_LIBS$]) ++m4trace:configure.ac:106: -1- PKG_CHECK_MODULES([DBUS], [ ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0]) ++m4trace:configure.ac:106: -1- m4_pattern_allow([^DBUS_CFLAGS$]) ++m4trace:configure.ac:106: -1- m4_pattern_allow([^DBUS_LIBS$]) ++m4trace:configure.ac:106: -1- PKG_CHECK_EXISTS([ ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0], [pkg_cv_[]DBUS_CFLAGS=`$PKG_CONFIG --[]cflags " ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:106: -1- PKG_CHECK_EXISTS([ ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0], [pkg_cv_[]DBUS_LIBS=`$PKG_CONFIG --[]libs " ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:106: -1- _PKG_SHORT_ERRORS_SUPPORTED ++m4trace:configure.ac:110: -1- m4_pattern_allow([^DBUS_CFLAGS$]) ++m4trace:configure.ac:111: -1- m4_pattern_allow([^DBUS_LIBS$]) ++m4trace:configure.ac:113: -1- PKG_CHECK_MODULES([GNOME], [ ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED]) ++m4trace:configure.ac:113: -1- m4_pattern_allow([^GNOME_CFLAGS$]) ++m4trace:configure.ac:113: -1- m4_pattern_allow([^GNOME_LIBS$]) ++m4trace:configure.ac:113: -1- PKG_CHECK_EXISTS([ ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED], [pkg_cv_[]GNOME_CFLAGS=`$PKG_CONFIG --[]cflags " ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:113: -1- PKG_CHECK_EXISTS([ ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED], [pkg_cv_[]GNOME_LIBS=`$PKG_CONFIG --[]libs " ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:113: -1- _PKG_SHORT_ERRORS_SUPPORTED ++m4trace:configure.ac:121: -1- m4_pattern_allow([^GNOME_CFLAGS$]) ++m4trace:configure.ac:122: -1- m4_pattern_allow([^GNOME_LIBS$]) ++m4trace:configure.ac:124: -1- PKG_CHECK_MODULES([GDK], [ ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED]) ++m4trace:configure.ac:124: -1- m4_pattern_allow([^GDK_CFLAGS$]) ++m4trace:configure.ac:124: -1- m4_pattern_allow([^GDK_LIBS$]) ++m4trace:configure.ac:124: -1- PKG_CHECK_EXISTS([ ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED], [pkg_cv_[]GDK_CFLAGS=`$PKG_CONFIG --[]cflags " ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:124: -1- PKG_CHECK_EXISTS([ ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED], [pkg_cv_[]GDK_LIBS=`$PKG_CONFIG --[]libs " ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:124: -1- _PKG_SHORT_ERRORS_SUPPORTED ++m4trace:configure.ac:127: -1- m4_pattern_allow([^GDK_CFLAGS$]) ++m4trace:configure.ac:128: -1- m4_pattern_allow([^GDK_LIBS$]) ++m4trace:configure.ac:130: -1- PKG_CHECK_MODULES([XRANDR], [ ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11]) ++m4trace:configure.ac:130: -1- m4_pattern_allow([^XRANDR_CFLAGS$]) ++m4trace:configure.ac:130: -1- m4_pattern_allow([^XRANDR_LIBS$]) ++m4trace:configure.ac:130: -1- PKG_CHECK_EXISTS([ ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11], [pkg_cv_[]XRANDR_CFLAGS=`$PKG_CONFIG --[]cflags " ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:130: -1- PKG_CHECK_EXISTS([ ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11], [pkg_cv_[]XRANDR_LIBS=`$PKG_CONFIG --[]libs " ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:130: -1- _PKG_SHORT_ERRORS_SUPPORTED ++m4trace:configure.ac:133: -1- m4_pattern_allow([^XRANDR_CFLAGS$]) ++m4trace:configure.ac:134: -1- m4_pattern_allow([^XRANDR_LIBS$]) ++m4trace:configure.ac:136: -1- m4_pattern_allow([^GCONFTOOL$]) ++m4trace:configure.ac:137: -1- AM_GCONF_SOURCE_2 ++m4trace:configure.ac:137: -2- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from... ++/usr/share/aclocal/gconf-2.m4:8: AM_GCONF_SOURCE_2 is expanded from... ++configure.ac:137: the top level]) ++m4trace:configure.ac:137: -1- m4_pattern_allow([^GCONF_SCHEMA_CONFIG_SOURCE$]) ++m4trace:configure.ac:137: -2- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from... ++/usr/share/aclocal/gconf-2.m4:8: AM_GCONF_SOURCE_2 is expanded from... ++configure.ac:137: the top level]) ++m4trace:configure.ac:137: -1- m4_pattern_allow([^GCONF_SCHEMA_FILE_DIR$]) ++m4trace:configure.ac:137: -1- AM_CONDITIONAL([GCONF_SCHEMAS_INSTALL], [test "$enable_schemas_install" != no]) ++m4trace:configure.ac:137: -1- m4_pattern_allow([^GCONF_SCHEMAS_INSTALL_TRUE$]) ++m4trace:configure.ac:137: -1- m4_pattern_allow([^GCONF_SCHEMAS_INSTALL_FALSE$]) ++m4trace:configure.ac:139: -1- m4_pattern_allow([^XMKMF$]) ++m4trace:configure.ac:139: -1- m4_pattern_allow([^X_DISPLAY_MISSING$]) ++m4trace:configure.ac:139: -1- m4_pattern_allow([^X_CFLAGS$]) ++m4trace:configure.ac:139: -1- m4_pattern_allow([^X_PRE_LIBS$]) ++m4trace:configure.ac:139: -1- m4_pattern_allow([^X_LIBS$]) ++m4trace:configure.ac:139: -1- m4_pattern_allow([^X_EXTRA_LIBS$]) ++m4trace:configure.ac:146: -1- m4_pattern_allow([^SYSCONFDIR$]) ++m4trace:configure.ac:147: -1- m4_pattern_allow([^DATADIR$]) ++m4trace:configure.ac:148: -1- m4_pattern_allow([^BINDIR$]) ++m4trace:configure.ac:149: -1- m4_pattern_allow([^SBINDIR$]) ++m4trace:configure.ac:163: -1- m4_pattern_allow([^DOCDIR$]) ++m4trace:configure.ac:176: -1- PKG_CHECK_MODULES([POLKIT], [\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED]) ++m4trace:configure.ac:176: -1- m4_pattern_allow([^POLKIT_CFLAGS$]) ++m4trace:configure.ac:176: -1- m4_pattern_allow([^POLKIT_LIBS$]) ++m4trace:configure.ac:176: -1- PKG_CHECK_EXISTS([\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED], [pkg_cv_[]POLKIT_CFLAGS=`$PKG_CONFIG --[]cflags "\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:176: -1- PKG_CHECK_EXISTS([\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED], [pkg_cv_[]POLKIT_LIBS=`$PKG_CONFIG --[]libs "\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:176: -1- _PKG_SHORT_ERRORS_SUPPORTED ++m4trace:configure.ac:179: -1- m4_pattern_allow([^POLKIT_CFLAGS$]) ++m4trace:configure.ac:180: -1- m4_pattern_allow([^POLKIT_LIBS$]) ++m4trace:configure.ac:182: -1- m4_pattern_allow([^HAVE_POLKIT$]) ++m4trace:configure.ac:200: -1- m4_pattern_allow([^HAVE_CHECK_FG$]) ++m4trace:configure.ac:218: -1- m4_pattern_allow([^HAVE_XEVENTS$]) ++m4trace:configure.ac:236: -1- m4_pattern_allow([^HAVE_TESTS$]) ++m4trace:configure.ac:241: -1- AM_CONDITIONAL([HAVE_TESTS], [test $have_tests = yes]) ++m4trace:configure.ac:241: -1- m4_pattern_allow([^HAVE_TESTS_TRUE$]) ++m4trace:configure.ac:241: -1- m4_pattern_allow([^HAVE_TESTS_FALSE$]) ++m4trace:configure.ac:254: -1- PKG_CHECK_MODULES([POLKIT_GNOME], [ ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED]) ++m4trace:configure.ac:254: -1- m4_pattern_allow([^POLKIT_GNOME_CFLAGS$]) ++m4trace:configure.ac:254: -1- m4_pattern_allow([^POLKIT_GNOME_LIBS$]) ++m4trace:configure.ac:254: -1- PKG_CHECK_EXISTS([ ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED], [pkg_cv_[]POLKIT_GNOME_CFLAGS=`$PKG_CONFIG --[]cflags " ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:254: -1- PKG_CHECK_EXISTS([ ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED], [pkg_cv_[]POLKIT_GNOME_LIBS=`$PKG_CONFIG --[]libs " ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:254: -1- _PKG_SHORT_ERRORS_SUPPORTED ++m4trace:configure.ac:256: -1- m4_pattern_allow([^POLKIT_GNOME_CFLAGS$]) ++m4trace:configure.ac:257: -1- m4_pattern_allow([^POLKIT_GNOME_LIBS$]) ++m4trace:configure.ac:259: -1- m4_pattern_allow([^HAVE_GCONF_DEFAULTS$]) ++m4trace:configure.ac:264: -1- AM_CONDITIONAL([HAVE_GCONF_DEFAULTS], [test $have_gconfdefaults = yes]) ++m4trace:configure.ac:264: -1- m4_pattern_allow([^HAVE_GCONF_DEFAULTS_TRUE$]) ++m4trace:configure.ac:264: -1- m4_pattern_allow([^HAVE_GCONF_DEFAULTS_FALSE$]) ++m4trace:configure.ac:278: -1- m4_pattern_allow([^HAVE_APPLETS$]) ++m4trace:configure.ac:283: -1- AM_CONDITIONAL([HAVE_APPLETS], [test $have_applets = yes]) ++m4trace:configure.ac:283: -1- m4_pattern_allow([^HAVE_APPLETS_TRUE$]) ++m4trace:configure.ac:283: -1- m4_pattern_allow([^HAVE_APPLETS_FALSE$]) ++m4trace:configure.ac:293: -1- m4_pattern_allow([^XMLTO$]) ++m4trace:configure.ac:312: -1- AM_CONDITIONAL([DOCBOOK_DOCS_ENABLED], [test x$enable_docbook_docs = xyes]) ++m4trace:configure.ac:312: -1- m4_pattern_allow([^DOCBOOK_DOCS_ENABLED_TRUE$]) ++m4trace:configure.ac:312: -1- m4_pattern_allow([^DOCBOOK_DOCS_ENABLED_FALSE$]) ++m4trace:configure.ac:328: -1- m4_pattern_allow([^DBUS_SERVICES_DIR$]) ++m4trace:configure.ac:335: -1- PKG_CHECK_MODULES([LIBNOTIFY], [libnotify >= $LIBNOTIFY_REQUIRED]) ++m4trace:configure.ac:335: -1- m4_pattern_allow([^LIBNOTIFY_CFLAGS$]) ++m4trace:configure.ac:335: -1- m4_pattern_allow([^LIBNOTIFY_LIBS$]) ++m4trace:configure.ac:335: -1- PKG_CHECK_EXISTS([libnotify >= $LIBNOTIFY_REQUIRED], [pkg_cv_[]LIBNOTIFY_CFLAGS=`$PKG_CONFIG --[]cflags "libnotify >= $LIBNOTIFY_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:335: -1- PKG_CHECK_EXISTS([libnotify >= $LIBNOTIFY_REQUIRED], [pkg_cv_[]LIBNOTIFY_LIBS=`$PKG_CONFIG --[]libs "libnotify >= $LIBNOTIFY_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:335: -1- _PKG_SHORT_ERRORS_SUPPORTED ++m4trace:configure.ac:336: -1- m4_pattern_allow([^LIBNOTIFY_CFLAGS$]) ++m4trace:configure.ac:337: -1- m4_pattern_allow([^LIBNOTIFY_LIBS$]) ++m4trace:configure.ac:338: -1- m4_pattern_allow([^HAVE_LIBNOTIFY$]) ++m4trace:configure.ac:342: -1- AM_CONDITIONAL([HAVE_LIBNOTIFY], [test $have_libnotify = yes]) ++m4trace:configure.ac:342: -1- m4_pattern_allow([^HAVE_LIBNOTIFY_TRUE$]) ++m4trace:configure.ac:342: -1- m4_pattern_allow([^HAVE_LIBNOTIFY_FALSE$]) ++m4trace:configure.ac:349: -1- PKG_CHECK_MODULES([UNIQUE], [unique-1.0 >= $UNIQUE_REQUIRED]) ++m4trace:configure.ac:349: -1- m4_pattern_allow([^UNIQUE_CFLAGS$]) ++m4trace:configure.ac:349: -1- m4_pattern_allow([^UNIQUE_LIBS$]) ++m4trace:configure.ac:349: -1- PKG_CHECK_EXISTS([unique-1.0 >= $UNIQUE_REQUIRED], [pkg_cv_[]UNIQUE_CFLAGS=`$PKG_CONFIG --[]cflags "unique-1.0 >= $UNIQUE_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:349: -1- PKG_CHECK_EXISTS([unique-1.0 >= $UNIQUE_REQUIRED], [pkg_cv_[]UNIQUE_LIBS=`$PKG_CONFIG --[]libs "unique-1.0 >= $UNIQUE_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:349: -1- _PKG_SHORT_ERRORS_SUPPORTED ++m4trace:configure.ac:350: -1- m4_pattern_allow([^UNIQUE_CFLAGS$]) ++m4trace:configure.ac:351: -1- m4_pattern_allow([^UNIQUE_LIBS$]) ++m4trace:configure.ac:352: -1- m4_pattern_allow([^HAVE_UNIQUE$]) ++m4trace:configure.ac:355: -1- m4_pattern_allow([^HAVE_UNIQUE$]) ++m4trace:configure.ac:357: -1- AM_CONDITIONAL([HAVE_UNIQUE], [test $have_unique = yes]) ++m4trace:configure.ac:357: -1- m4_pattern_allow([^HAVE_UNIQUE_TRUE$]) ++m4trace:configure.ac:357: -1- m4_pattern_allow([^HAVE_UNIQUE_FALSE$]) ++m4trace:configure.ac:365: -1- AC_DEFUN([AC_CHECK_X_HEADER], [ ++ ac_save_CPPFLAGS="$CPPFLAGS" ++ if test \! -z "$includedir" ; then ++ CPPFLAGS="$CPPFLAGS -I$includedir" ++ fi ++ CPPFLAGS="$CPPFLAGS $X_CFLAGS" ++ AC_CHECK_HEADER([$1],[$2],[$3],[$4]) ++ CPPFLAGS="$ac_save_CPPFLAGS"]) ++m4trace:configure.ac:376: -1- AC_DEFUN([AC_TRY_X_COMPILE], [ ++ ac_save_CPPFLAGS="$CPPFLAGS" ++ if test \! -z "$includedir" ; then ++ CPPFLAGS="$CPPFLAGS -I$includedir" ++ fi ++ CPPFLAGS="$CPPFLAGS $X_CFLAGS" ++ AC_TRY_COMPILE([$1], [$2], [$3], [$4]) ++ CPPFLAGS="$ac_save_CPPFLAGS"]) ++m4trace:configure.ac:389: -1- AC_DEFUN([AC_CHECK_X_LIB], [ ++ ac_save_CPPFLAGS="$CPPFLAGS" ++ ac_save_LDFLAGS="$LDFLAGS" ++# ac_save_LIBS="$LIBS" ++ ++ if test \! -z "$includedir" ; then ++ CPPFLAGS="$CPPFLAGS -I$includedir" ++ fi ++ # note: $X_CFLAGS includes $x_includes ++ CPPFLAGS="$CPPFLAGS $X_CFLAGS" ++ ++ if test \! -z "$libdir" ; then ++ LDFLAGS="$LDFLAGS -L$libdir" ++ fi ++ # note: $X_LIBS includes $x_libraries ++ LDFLAGS="$LDFLAGS $ALL_X_LIBS" ++ ++ AC_CHECK_LIB([$1], [$2], [$3], [$4], [$5]) ++ CPPFLAGS="$ac_save_CPPFLAGS" ++ LDFLAGS="$ac_save_LDFLAGS" ++# LIBS="$ac_save_LIBS" ++ ]) ++m4trace:configure.ac:428: -1- AC_DEFUN([HANDLE_X_PATH_ARG], [ ++ case "$[$1]" in ++ yes) ;; ++ no) ;; ++ ++ /*) ++ AC_MSG_CHECKING([for [$3] headers]) ++ d=$[$1]/include ++ if test -d $d; then ++ X_CFLAGS="-I$d $X_CFLAGS" ++ AC_MSG_RESULT($d) ++ else ++ AC_MSG_RESULT(not found ($d: no such directory)) ++ fi ++ ++ AC_MSG_CHECKING([for [$3] libs]) ++ d=$[$1]/lib ++ if test -d $d; then ++ X_LIBS="-L$d $X_LIBS" ++ AC_MSG_RESULT($d) ++ else ++ AC_MSG_RESULT(not found ($d: no such directory)) ++ fi ++ ++ # replace the directory string with "yes". ++ [$1]_req="yes" ++ [$1]=$[$1]_req ++ ;; ++ ++ *) ++ echo "" ++ echo "error: argument to [$2] must be \"yes\", \"no\", or a directory." ++ echo " If it is a directory, then \`DIR/include' will be added to" ++ echo " the -I list, and \`DIR/lib' will be added to the -L list." ++ exit 1 ++ ;; ++ esac ++ ]) ++m4trace:configure.ac:481: -1- HANDLE_X_PATH_ARG([with_dpms], [--with-dpms-ext], [DPMS]) ++m4trace:configure.ac:486: -1- AC_CHECK_X_HEADER([X11/extensions/dpms.h], [have_dpms=yes], [], [#include ++ #include ]) ++m4trace:configure.ac:495: -1- AC_CHECK_X_LIB([Xext], [DPMSInfo], [have_dpms=yes], [true], [-lXext -lX11]) ++m4trace:configure.ac:499: -1- AC_CHECK_X_LIB([Xdpms], [DPMSInfo], [have_dpms=yes; XDPMS_LIBS="-lXdpms"], [true], [-lXext -lX11]) ++m4trace:configure.ac:508: -1- m4_pattern_allow([^HAVE_DPMS_EXTENSION$]) ++m4trace:configure.ac:521: -1- m4_pattern_allow([^HAVE_KSTAT$]) ++m4trace:configure.ac:526: -1- m4_pattern_allow([^GPM_EXTRA_LIBS$]) ++m4trace:configure.ac:531: -1- m4_pattern_allow([^DOCBOOK2MAN$]) ++m4trace:configure.ac:535: -1- AM_CONDITIONAL([HAVE_DOCBOOK2MAN], [test "$DOCBOOK2MAN" != "no"]) ++m4trace:configure.ac:535: -1- m4_pattern_allow([^HAVE_DOCBOOK2MAN_TRUE$]) ++m4trace:configure.ac:535: -1- m4_pattern_allow([^HAVE_DOCBOOK2MAN_FALSE$]) ++m4trace:configure.ac:566: -1- _m4_warn([obsolete], [The macro `AC_TRY_COMPILE' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:2367: AC_TRY_COMPILE is expanded from... ++configure.ac:566: the top level]) ++m4trace:configure.ac:629: -1- m4_pattern_allow([^LIB@&t@OBJS$]) ++m4trace:configure.ac:629: -1- m4_pattern_allow([^LTLIBOBJS$]) ++m4trace:configure.ac:629: -1- _AC_AM_CONFIG_HEADER_HOOK([$ac_file]) ++m4trace:configure.ac:629: -1- _AM_OUTPUT_DEPENDENCY_COMMANDS ++m4trace:configure.ac:629: -1- _LT_PROG_LTMAIN +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/autom4te.cache/traces.1 gnome-power-manager-2.24.0.new/autom4te.cache/traces.1 +--- gnome-power-manager-2.24.0/autom4te.cache/traces.1 1970-01-01 01:00:00.000000000 +0100 ++++ gnome-power-manager-2.24.0.new/autom4te.cache/traces.1 2008-11-20 18:37:23.000000000 +0100 +@@ -0,0 +1,1142 @@ ++m4trace:aclocal.m4:1668: -1- m4_include([m4/gnome-doc-utils.m4]) ++m4trace:aclocal.m4:1669: -1- m4_include([m4/intltool.m4]) ++m4trace:aclocal.m4:1670: -1- m4_include([m4/libtool.m4]) ++m4trace:aclocal.m4:1671: -1- m4_include([m4/ltoptions.m4]) ++m4trace:aclocal.m4:1672: -1- m4_include([m4/ltsugar.m4]) ++m4trace:aclocal.m4:1673: -1- m4_include([m4/ltversion.m4]) ++m4trace:aclocal.m4:1674: -1- m4_include([m4/lt~obsolete.m4]) ++m4trace:configure.ac:3: -1- AC_INIT([gnome-power-manager], [2.24.0]) ++m4trace:configure.ac:3: -1- m4_pattern_forbid([^_?A[CHUM]_]) ++m4trace:configure.ac:3: -1- m4_pattern_forbid([_AC_]) ++m4trace:configure.ac:3: -1- m4_pattern_forbid([^LIBOBJS$], [do not use LIBOBJS directly, use AC_LIBOBJ (see section `AC_LIBOBJ vs LIBOBJS']) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^AS_FLAGS$]) ++m4trace:configure.ac:3: -1- m4_pattern_forbid([^_?m4_]) ++m4trace:configure.ac:3: -1- m4_pattern_forbid([^dnl$]) ++m4trace:configure.ac:3: -1- m4_pattern_forbid([^_?AS_]) ++m4trace:configure.ac:3: -1- AC_SUBST([SHELL], [${CONFIG_SHELL-/bin/sh}]) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([SHELL]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^SHELL$]) ++m4trace:configure.ac:3: -1- AC_SUBST([PATH_SEPARATOR]) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([PATH_SEPARATOR]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PATH_SEPARATOR$]) ++m4trace:configure.ac:3: -1- AC_SUBST([PACKAGE_NAME], [m4_ifdef([AC_PACKAGE_NAME], ['AC_PACKAGE_NAME'])]) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([PACKAGE_NAME]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE_NAME$]) ++m4trace:configure.ac:3: -1- AC_SUBST([PACKAGE_TARNAME], [m4_ifdef([AC_PACKAGE_TARNAME], ['AC_PACKAGE_TARNAME'])]) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([PACKAGE_TARNAME]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE_TARNAME$]) ++m4trace:configure.ac:3: -1- AC_SUBST([PACKAGE_VERSION], [m4_ifdef([AC_PACKAGE_VERSION], ['AC_PACKAGE_VERSION'])]) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([PACKAGE_VERSION]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE_VERSION$]) ++m4trace:configure.ac:3: -1- AC_SUBST([PACKAGE_STRING], [m4_ifdef([AC_PACKAGE_STRING], ['AC_PACKAGE_STRING'])]) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([PACKAGE_STRING]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE_STRING$]) ++m4trace:configure.ac:3: -1- AC_SUBST([PACKAGE_BUGREPORT], [m4_ifdef([AC_PACKAGE_BUGREPORT], ['AC_PACKAGE_BUGREPORT'])]) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([PACKAGE_BUGREPORT]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$]) ++m4trace:configure.ac:3: -1- AC_SUBST([exec_prefix], [NONE]) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([exec_prefix]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^exec_prefix$]) ++m4trace:configure.ac:3: -1- AC_SUBST([prefix], [NONE]) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([prefix]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^prefix$]) ++m4trace:configure.ac:3: -1- AC_SUBST([program_transform_name], [s,x,x,]) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([program_transform_name]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^program_transform_name$]) ++m4trace:configure.ac:3: -1- AC_SUBST([bindir], ['${exec_prefix}/bin']) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([bindir]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^bindir$]) ++m4trace:configure.ac:3: -1- AC_SUBST([sbindir], ['${exec_prefix}/sbin']) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([sbindir]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^sbindir$]) ++m4trace:configure.ac:3: -1- AC_SUBST([libexecdir], ['${exec_prefix}/libexec']) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([libexecdir]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^libexecdir$]) ++m4trace:configure.ac:3: -1- AC_SUBST([datarootdir], ['${prefix}/share']) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([datarootdir]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^datarootdir$]) ++m4trace:configure.ac:3: -1- AC_SUBST([datadir], ['${datarootdir}']) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([datadir]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^datadir$]) ++m4trace:configure.ac:3: -1- AC_SUBST([sysconfdir], ['${prefix}/etc']) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([sysconfdir]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^sysconfdir$]) ++m4trace:configure.ac:3: -1- AC_SUBST([sharedstatedir], ['${prefix}/com']) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([sharedstatedir]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^sharedstatedir$]) ++m4trace:configure.ac:3: -1- AC_SUBST([localstatedir], ['${prefix}/var']) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([localstatedir]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^localstatedir$]) ++m4trace:configure.ac:3: -1- AC_SUBST([includedir], ['${prefix}/include']) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([includedir]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^includedir$]) ++m4trace:configure.ac:3: -1- AC_SUBST([oldincludedir], ['/usr/include']) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([oldincludedir]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^oldincludedir$]) ++m4trace:configure.ac:3: -1- AC_SUBST([docdir], [m4_ifset([AC_PACKAGE_TARNAME], ++ ['${datarootdir}/doc/${PACKAGE_TARNAME}'], ++ ['${datarootdir}/doc/${PACKAGE}'])]) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([docdir]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^docdir$]) ++m4trace:configure.ac:3: -1- AC_SUBST([infodir], ['${datarootdir}/info']) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([infodir]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^infodir$]) ++m4trace:configure.ac:3: -1- AC_SUBST([htmldir], ['${docdir}']) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([htmldir]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^htmldir$]) ++m4trace:configure.ac:3: -1- AC_SUBST([dvidir], ['${docdir}']) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([dvidir]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^dvidir$]) ++m4trace:configure.ac:3: -1- AC_SUBST([pdfdir], ['${docdir}']) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([pdfdir]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^pdfdir$]) ++m4trace:configure.ac:3: -1- AC_SUBST([psdir], ['${docdir}']) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([psdir]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^psdir$]) ++m4trace:configure.ac:3: -1- AC_SUBST([libdir], ['${exec_prefix}/lib']) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([libdir]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^libdir$]) ++m4trace:configure.ac:3: -1- AC_SUBST([localedir], ['${datarootdir}/locale']) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([localedir]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^localedir$]) ++m4trace:configure.ac:3: -1- AC_SUBST([mandir], ['${datarootdir}/man']) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([mandir]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^mandir$]) ++m4trace:configure.ac:3: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_NAME]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE_NAME$]) ++m4trace:configure.ac:3: -1- AH_OUTPUT([PACKAGE_NAME], [/* Define to the full name of this package. */ ++#undef PACKAGE_NAME]) ++m4trace:configure.ac:3: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_TARNAME]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE_TARNAME$]) ++m4trace:configure.ac:3: -1- AH_OUTPUT([PACKAGE_TARNAME], [/* Define to the one symbol short name of this package. */ ++#undef PACKAGE_TARNAME]) ++m4trace:configure.ac:3: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_VERSION]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE_VERSION$]) ++m4trace:configure.ac:3: -1- AH_OUTPUT([PACKAGE_VERSION], [/* Define to the version of this package. */ ++#undef PACKAGE_VERSION]) ++m4trace:configure.ac:3: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_STRING]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE_STRING$]) ++m4trace:configure.ac:3: -1- AH_OUTPUT([PACKAGE_STRING], [/* Define to the full name and version of this package. */ ++#undef PACKAGE_STRING]) ++m4trace:configure.ac:3: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_BUGREPORT]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$]) ++m4trace:configure.ac:3: -1- AH_OUTPUT([PACKAGE_BUGREPORT], [/* Define to the address where bug reports for this package should be sent. */ ++#undef PACKAGE_BUGREPORT]) ++m4trace:configure.ac:3: -1- AC_SUBST([DEFS]) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([DEFS]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^DEFS$]) ++m4trace:configure.ac:3: -1- AC_SUBST([ECHO_C]) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([ECHO_C]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^ECHO_C$]) ++m4trace:configure.ac:3: -1- AC_SUBST([ECHO_N]) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([ECHO_N]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^ECHO_N$]) ++m4trace:configure.ac:3: -1- AC_SUBST([ECHO_T]) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([ECHO_T]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^ECHO_T$]) ++m4trace:configure.ac:3: -1- AC_SUBST([LIBS]) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([LIBS]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^LIBS$]) ++m4trace:configure.ac:3: -1- AC_SUBST([build_alias]) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([build_alias]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^build_alias$]) ++m4trace:configure.ac:3: -1- AC_SUBST([host_alias]) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([host_alias]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^host_alias$]) ++m4trace:configure.ac:3: -1- AC_SUBST([target_alias]) ++m4trace:configure.ac:3: -1- AC_SUBST_TRACE([target_alias]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^target_alias$]) ++m4trace:configure.ac:5: -1- AM_INIT_AUTOMAKE([gnome-power-manager], [2.24.0]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^AM_[A-Z]+FLAGS$]) ++m4trace:configure.ac:5: -1- AM_AUTOMAKE_VERSION([1.9.6]) ++m4trace:configure.ac:5: -1- AC_REQUIRE_AUX_FILE([install-sh]) ++m4trace:configure.ac:5: -1- AC_SUBST([INSTALL_PROGRAM]) ++m4trace:configure.ac:5: -1- AC_SUBST_TRACE([INSTALL_PROGRAM]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^INSTALL_PROGRAM$]) ++m4trace:configure.ac:5: -1- AC_SUBST([INSTALL_SCRIPT]) ++m4trace:configure.ac:5: -1- AC_SUBST_TRACE([INSTALL_SCRIPT]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^INSTALL_SCRIPT$]) ++m4trace:configure.ac:5: -1- AC_SUBST([INSTALL_DATA]) ++m4trace:configure.ac:5: -1- AC_SUBST_TRACE([INSTALL_DATA]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^INSTALL_DATA$]) ++m4trace:configure.ac:5: -1- AC_SUBST([CYGPATH_W]) ++m4trace:configure.ac:5: -1- AC_SUBST_TRACE([CYGPATH_W]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^CYGPATH_W$]) ++m4trace:configure.ac:5: -1- AC_SUBST([PACKAGE], [gnome-power-manager]) ++m4trace:configure.ac:5: -1- AC_SUBST_TRACE([PACKAGE]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^PACKAGE$]) ++m4trace:configure.ac:5: -1- AC_SUBST([VERSION], [2.24.0]) ++m4trace:configure.ac:5: -1- AC_SUBST_TRACE([VERSION]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^VERSION$]) ++m4trace:configure.ac:5: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^PACKAGE$]) ++m4trace:configure.ac:5: -1- AH_OUTPUT([PACKAGE], [/* Name of package */ ++#undef PACKAGE]) ++m4trace:configure.ac:5: -1- AC_DEFINE_TRACE_LITERAL([VERSION]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^VERSION$]) ++m4trace:configure.ac:5: -1- AH_OUTPUT([VERSION], [/* Version number of package */ ++#undef VERSION]) ++m4trace:configure.ac:5: -1- AC_SUBST([ACLOCAL]) ++m4trace:configure.ac:5: -1- AC_SUBST_TRACE([ACLOCAL]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^ACLOCAL$]) ++m4trace:configure.ac:5: -1- AC_SUBST([AUTOCONF]) ++m4trace:configure.ac:5: -1- AC_SUBST_TRACE([AUTOCONF]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^AUTOCONF$]) ++m4trace:configure.ac:5: -1- AC_SUBST([AUTOMAKE]) ++m4trace:configure.ac:5: -1- AC_SUBST_TRACE([AUTOMAKE]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^AUTOMAKE$]) ++m4trace:configure.ac:5: -1- AC_SUBST([AUTOHEADER]) ++m4trace:configure.ac:5: -1- AC_SUBST_TRACE([AUTOHEADER]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^AUTOHEADER$]) ++m4trace:configure.ac:5: -1- AC_SUBST([MAKEINFO]) ++m4trace:configure.ac:5: -1- AC_SUBST_TRACE([MAKEINFO]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^MAKEINFO$]) ++m4trace:configure.ac:5: -1- AC_SUBST([install_sh]) ++m4trace:configure.ac:5: -1- AC_SUBST_TRACE([install_sh]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^install_sh$]) ++m4trace:configure.ac:5: -1- AC_SUBST([STRIP]) ++m4trace:configure.ac:5: -1- AC_SUBST_TRACE([STRIP]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^STRIP$]) ++m4trace:configure.ac:5: -1- AC_SUBST([INSTALL_STRIP_PROGRAM]) ++m4trace:configure.ac:5: -1- AC_SUBST_TRACE([INSTALL_STRIP_PROGRAM]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^INSTALL_STRIP_PROGRAM$]) ++m4trace:configure.ac:5: -1- AC_SUBST([mkdir_p]) ++m4trace:configure.ac:5: -1- AC_SUBST_TRACE([mkdir_p]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^mkdir_p$]) ++m4trace:configure.ac:5: -1- AC_SUBST([AWK]) ++m4trace:configure.ac:5: -1- AC_SUBST_TRACE([AWK]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^AWK$]) ++m4trace:configure.ac:5: -1- AC_SUBST([SET_MAKE]) ++m4trace:configure.ac:5: -1- AC_SUBST_TRACE([SET_MAKE]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^SET_MAKE$]) ++m4trace:configure.ac:5: -1- AC_SUBST([am__leading_dot]) ++m4trace:configure.ac:5: -1- AC_SUBST_TRACE([am__leading_dot]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^am__leading_dot$]) ++m4trace:configure.ac:5: -1- AC_SUBST([AMTAR]) ++m4trace:configure.ac:5: -1- AC_SUBST_TRACE([AMTAR]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^AMTAR$]) ++m4trace:configure.ac:5: -1- AC_SUBST([am__tar]) ++m4trace:configure.ac:5: -1- AC_SUBST_TRACE([am__tar]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^am__tar$]) ++m4trace:configure.ac:5: -1- AC_SUBST([am__untar]) ++m4trace:configure.ac:5: -1- AC_SUBST_TRACE([am__untar]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^am__untar$]) ++m4trace:configure.ac:6: -1- _m4_warn([obsolete], [The macro `AM_CONFIG_HEADER' is obsolete. ++You should run autoupdate.], [aclocal.m4:1130: AM_CONFIG_HEADER is expanded from... ++configure.ac:6: the top level]) ++m4trace:configure.ac:6: -1- AC_CONFIG_HEADERS([config.h]) ++m4trace:configure.ac:9: -1- AC_SUBST([CC]) ++m4trace:configure.ac:9: -1- AC_SUBST_TRACE([CC]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^CC$]) ++m4trace:configure.ac:9: -1- AC_SUBST([CFLAGS]) ++m4trace:configure.ac:9: -1- AC_SUBST_TRACE([CFLAGS]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^CFLAGS$]) ++m4trace:configure.ac:9: -1- AC_SUBST([LDFLAGS]) ++m4trace:configure.ac:9: -1- AC_SUBST_TRACE([LDFLAGS]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^LDFLAGS$]) ++m4trace:configure.ac:9: -1- AC_SUBST([LIBS]) ++m4trace:configure.ac:9: -1- AC_SUBST_TRACE([LIBS]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^LIBS$]) ++m4trace:configure.ac:9: -1- AC_SUBST([CPPFLAGS]) ++m4trace:configure.ac:9: -1- AC_SUBST_TRACE([CPPFLAGS]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^CPPFLAGS$]) ++m4trace:configure.ac:9: -1- AC_SUBST([CC]) ++m4trace:configure.ac:9: -1- AC_SUBST_TRACE([CC]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^CC$]) ++m4trace:configure.ac:9: -1- AC_SUBST([CC]) ++m4trace:configure.ac:9: -1- AC_SUBST_TRACE([CC]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^CC$]) ++m4trace:configure.ac:9: -1- AC_SUBST([CC]) ++m4trace:configure.ac:9: -1- AC_SUBST_TRACE([CC]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^CC$]) ++m4trace:configure.ac:9: -1- AC_SUBST([CC]) ++m4trace:configure.ac:9: -1- AC_SUBST_TRACE([CC]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^CC$]) ++m4trace:configure.ac:9: -1- AC_SUBST([ac_ct_CC]) ++m4trace:configure.ac:9: -1- AC_SUBST_TRACE([ac_ct_CC]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^ac_ct_CC$]) ++m4trace:configure.ac:9: -1- AC_SUBST([EXEEXT], [$ac_cv_exeext]) ++m4trace:configure.ac:9: -1- AC_SUBST_TRACE([EXEEXT]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^EXEEXT$]) ++m4trace:configure.ac:9: -1- AC_SUBST([OBJEXT], [$ac_cv_objext]) ++m4trace:configure.ac:9: -1- AC_SUBST_TRACE([OBJEXT]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^OBJEXT$]) ++m4trace:configure.ac:9: -1- AC_SUBST([DEPDIR], ["${am__leading_dot}deps"]) ++m4trace:configure.ac:9: -1- AC_SUBST_TRACE([DEPDIR]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^DEPDIR$]) ++m4trace:configure.ac:9: -1- AC_SUBST([am__include]) ++m4trace:configure.ac:9: -1- AC_SUBST_TRACE([am__include]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^am__include$]) ++m4trace:configure.ac:9: -1- AC_SUBST([am__quote]) ++m4trace:configure.ac:9: -1- AC_SUBST_TRACE([am__quote]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^am__quote$]) ++m4trace:configure.ac:9: -1- AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) ++m4trace:configure.ac:9: -1- AC_SUBST([AMDEP_TRUE]) ++m4trace:configure.ac:9: -1- AC_SUBST_TRACE([AMDEP_TRUE]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^AMDEP_TRUE$]) ++m4trace:configure.ac:9: -1- AC_SUBST([AMDEP_FALSE]) ++m4trace:configure.ac:9: -1- AC_SUBST_TRACE([AMDEP_FALSE]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^AMDEP_FALSE$]) ++m4trace:configure.ac:9: -1- AC_SUBST([AMDEPBACKSLASH]) ++m4trace:configure.ac:9: -1- AC_SUBST_TRACE([AMDEPBACKSLASH]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^AMDEPBACKSLASH$]) ++m4trace:configure.ac:9: -1- AC_SUBST([CCDEPMODE], [depmode=$am_cv_CC_dependencies_compiler_type]) ++m4trace:configure.ac:9: -1- AC_SUBST_TRACE([CCDEPMODE]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^CCDEPMODE$]) ++m4trace:configure.ac:9: -1- AM_CONDITIONAL([am__fastdepCC], [ ++ test "x$enable_dependency_tracking" != xno \ ++ && test "$am_cv_CC_dependencies_compiler_type" = gcc3]) ++m4trace:configure.ac:9: -1- AC_SUBST([am__fastdepCC_TRUE]) ++m4trace:configure.ac:9: -1- AC_SUBST_TRACE([am__fastdepCC_TRUE]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^am__fastdepCC_TRUE$]) ++m4trace:configure.ac:9: -1- AC_SUBST([am__fastdepCC_FALSE]) ++m4trace:configure.ac:9: -1- AC_SUBST_TRACE([am__fastdepCC_FALSE]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^am__fastdepCC_FALSE$]) ++m4trace:configure.ac:10: -1- AM_PROG_CC_C_O ++m4trace:configure.ac:10: -1- AC_DEFINE_TRACE_LITERAL([NO_MINUS_C_MINUS_O]) ++m4trace:configure.ac:10: -1- m4_pattern_allow([^NO_MINUS_C_MINUS_O$]) ++m4trace:configure.ac:10: -1- AH_OUTPUT([NO_MINUS_C_MINUS_O], [/* Define to 1 if your C compiler doesn\'t accept -c and -o together. */ ++#undef NO_MINUS_C_MINUS_O]) ++m4trace:configure.ac:12: -1- AC_REQUIRE_AUX_FILE([install-sh]) ++m4trace:configure.ac:12: -1- AC_SUBST([INSTALL_PROGRAM]) ++m4trace:configure.ac:12: -1- AC_SUBST_TRACE([INSTALL_PROGRAM]) ++m4trace:configure.ac:12: -1- m4_pattern_allow([^INSTALL_PROGRAM$]) ++m4trace:configure.ac:12: -1- AC_SUBST([INSTALL_SCRIPT]) ++m4trace:configure.ac:12: -1- AC_SUBST_TRACE([INSTALL_SCRIPT]) ++m4trace:configure.ac:12: -1- m4_pattern_allow([^INSTALL_SCRIPT$]) ++m4trace:configure.ac:12: -1- AC_SUBST([INSTALL_DATA]) ++m4trace:configure.ac:12: -1- AC_SUBST_TRACE([INSTALL_DATA]) ++m4trace:configure.ac:12: -1- m4_pattern_allow([^INSTALL_DATA$]) ++m4trace:configure.ac:13: -1- _m4_warn([obsolete], [The macro `AM_PROG_LIBTOOL' is obsolete. ++You should run autoupdate.], [m4/libtool.m4:103: AM_PROG_LIBTOOL is expanded from... ++configure.ac:13: the top level]) ++m4trace:configure.ac:13: -1- LT_INIT ++m4trace:configure.ac:13: -1- m4_pattern_forbid([^_?LT_[A-Z_]+$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$]) ++m4trace:configure.ac:13: -1- AC_REQUIRE_AUX_FILE([ltmain.sh]) ++m4trace:configure.ac:13: -1- AC_SUBST([LIBTOOL]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([LIBTOOL]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^LIBTOOL$]) ++m4trace:configure.ac:13: -1- AC_CANONICAL_HOST ++m4trace:configure.ac:13: -1- AC_CANONICAL_BUILD ++m4trace:configure.ac:13: -1- AC_REQUIRE_AUX_FILE([config.sub]) ++m4trace:configure.ac:13: -1- AC_REQUIRE_AUX_FILE([config.guess]) ++m4trace:configure.ac:13: -1- AC_SUBST([build], [$ac_cv_build]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([build]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^build$]) ++m4trace:configure.ac:13: -1- AC_SUBST([build_cpu], [$[1]]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([build_cpu]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^build_cpu$]) ++m4trace:configure.ac:13: -1- AC_SUBST([build_vendor], [$[2]]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([build_vendor]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^build_vendor$]) ++m4trace:configure.ac:13: -1- AC_SUBST([build_os]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([build_os]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^build_os$]) ++m4trace:configure.ac:13: -1- AC_SUBST([host], [$ac_cv_host]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([host]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^host$]) ++m4trace:configure.ac:13: -1- AC_SUBST([host_cpu], [$[1]]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([host_cpu]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^host_cpu$]) ++m4trace:configure.ac:13: -1- AC_SUBST([host_vendor], [$[2]]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([host_vendor]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^host_vendor$]) ++m4trace:configure.ac:13: -1- AC_SUBST([host_os]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([host_os]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^host_os$]) ++m4trace:configure.ac:13: -1- AC_SUBST([SED]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([SED]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^SED$]) ++m4trace:configure.ac:13: -1- AC_SUBST([SED]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([SED]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^SED$]) ++m4trace:configure.ac:13: -1- AC_SUBST([GREP]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([GREP]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^GREP$]) ++m4trace:configure.ac:13: -1- AC_SUBST([GREP]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([GREP]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^GREP$]) ++m4trace:configure.ac:13: -1- AC_SUBST([EGREP]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([EGREP]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^EGREP$]) ++m4trace:configure.ac:13: -1- AC_SUBST([EGREP]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([EGREP]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^EGREP$]) ++m4trace:configure.ac:13: -1- AC_SUBST([FGREP]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([FGREP]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^FGREP$]) ++m4trace:configure.ac:13: -1- AC_SUBST([FGREP]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([FGREP]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^FGREP$]) ++m4trace:configure.ac:13: -1- AC_SUBST([GREP]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([GREP]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^GREP$]) ++m4trace:configure.ac:13: -1- AC_SUBST([LD]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([LD]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^LD$]) ++m4trace:configure.ac:13: -1- AC_SUBST([DUMPBIN]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([DUMPBIN]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^DUMPBIN$]) ++m4trace:configure.ac:13: -1- AC_SUBST([ac_ct_DUMPBIN]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([ac_ct_DUMPBIN]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^ac_ct_DUMPBIN$]) ++m4trace:configure.ac:13: -1- AC_SUBST([DUMPBIN]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([DUMPBIN]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^DUMPBIN$]) ++m4trace:configure.ac:13: -1- AC_SUBST([NM]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([NM]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^NM$]) ++m4trace:configure.ac:13: -1- AC_SUBST([LN_S], [$as_ln_s]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([LN_S]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^LN_S$]) ++m4trace:configure.ac:13: -1- AC_SUBST([AR]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([AR]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^AR$]) ++m4trace:configure.ac:13: -1- AC_SUBST([STRIP]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([STRIP]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^STRIP$]) ++m4trace:configure.ac:13: -1- AC_SUBST([RANLIB]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([RANLIB]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^RANLIB$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([LT_OBJDIR]) ++m4trace:configure.ac:13: -1- AC_DEFINE_TRACE_LITERAL([LT_OBJDIR]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^LT_OBJDIR$]) ++m4trace:configure.ac:13: -1- AH_OUTPUT([LT_OBJDIR], [/* Define to the sub-directory in which libtool stores uninstalled libraries. ++ */ ++#undef LT_OBJDIR]) ++m4trace:configure.ac:13: -1- AC_SUBST([lt_ECHO]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([lt_ECHO]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^lt_ECHO$]) ++m4trace:configure.ac:13: -1- LT_SUPPORTED_TAG([CC]) ++m4trace:configure.ac:13: -1- AC_SUBST([DSYMUTIL]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([DSYMUTIL]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^DSYMUTIL$]) ++m4trace:configure.ac:13: -1- AC_SUBST([NMEDIT]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([NMEDIT]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^NMEDIT$]) ++m4trace:configure.ac:13: -1- AC_SUBST([LIPO]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([LIPO]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^LIPO$]) ++m4trace:configure.ac:13: -1- AC_SUBST([OTOOL]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([OTOOL]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^OTOOL$]) ++m4trace:configure.ac:13: -1- AC_SUBST([OTOOL64]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([OTOOL64]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^OTOOL64$]) ++m4trace:configure.ac:13: -1- AH_OUTPUT([HAVE_DLFCN_H], [/* Define to 1 if you have the header file. */ ++#undef HAVE_DLFCN_H]) ++m4trace:configure.ac:13: -1- AC_SUBST([CPP]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([CPP]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^CPP$]) ++m4trace:configure.ac:13: -1- AC_SUBST([CPPFLAGS]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([CPPFLAGS]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^CPPFLAGS$]) ++m4trace:configure.ac:13: -1- AC_SUBST([CPP]) ++m4trace:configure.ac:13: -1- AC_SUBST_TRACE([CPP]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^CPP$]) ++m4trace:configure.ac:13: -1- AC_DEFINE_TRACE_LITERAL([STDC_HEADERS]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^STDC_HEADERS$]) ++m4trace:configure.ac:13: -1- AH_OUTPUT([STDC_HEADERS], [/* Define to 1 if you have the ANSI C header files. */ ++#undef STDC_HEADERS]) ++m4trace:configure.ac:13: -1- AH_OUTPUT([HAVE_SYS_TYPES_H], [/* Define to 1 if you have the header file. */ ++#undef HAVE_SYS_TYPES_H]) ++m4trace:configure.ac:13: -1- AH_OUTPUT([HAVE_SYS_STAT_H], [/* Define to 1 if you have the header file. */ ++#undef HAVE_SYS_STAT_H]) ++m4trace:configure.ac:13: -1- AH_OUTPUT([HAVE_STDLIB_H], [/* Define to 1 if you have the header file. */ ++#undef HAVE_STDLIB_H]) ++m4trace:configure.ac:13: -1- AH_OUTPUT([HAVE_STRING_H], [/* Define to 1 if you have the header file. */ ++#undef HAVE_STRING_H]) ++m4trace:configure.ac:13: -1- AH_OUTPUT([HAVE_MEMORY_H], [/* Define to 1 if you have the header file. */ ++#undef HAVE_MEMORY_H]) ++m4trace:configure.ac:13: -1- AH_OUTPUT([HAVE_STRINGS_H], [/* Define to 1 if you have the header file. */ ++#undef HAVE_STRINGS_H]) ++m4trace:configure.ac:13: -1- AH_OUTPUT([HAVE_INTTYPES_H], [/* Define to 1 if you have the header file. */ ++#undef HAVE_INTTYPES_H]) ++m4trace:configure.ac:13: -1- AH_OUTPUT([HAVE_STDINT_H], [/* Define to 1 if you have the header file. */ ++#undef HAVE_STDINT_H]) ++m4trace:configure.ac:13: -1- AH_OUTPUT([HAVE_UNISTD_H], [/* Define to 1 if you have the header file. */ ++#undef HAVE_UNISTD_H]) ++m4trace:configure.ac:14: -1- AC_SUBST([INTLTOOL_DESKTOP_RULE]) ++m4trace:configure.ac:14: -1- AC_SUBST_TRACE([INTLTOOL_DESKTOP_RULE]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_DESKTOP_RULE$]) ++m4trace:configure.ac:14: -1- AC_SUBST([INTLTOOL_DIRECTORY_RULE]) ++m4trace:configure.ac:14: -1- AC_SUBST_TRACE([INTLTOOL_DIRECTORY_RULE]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_DIRECTORY_RULE$]) ++m4trace:configure.ac:14: -1- AC_SUBST([INTLTOOL_KEYS_RULE]) ++m4trace:configure.ac:14: -1- AC_SUBST_TRACE([INTLTOOL_KEYS_RULE]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_KEYS_RULE$]) ++m4trace:configure.ac:14: -1- AC_SUBST([INTLTOOL_PROP_RULE]) ++m4trace:configure.ac:14: -1- AC_SUBST_TRACE([INTLTOOL_PROP_RULE]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_PROP_RULE$]) ++m4trace:configure.ac:14: -1- AC_SUBST([INTLTOOL_OAF_RULE]) ++m4trace:configure.ac:14: -1- AC_SUBST_TRACE([INTLTOOL_OAF_RULE]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_OAF_RULE$]) ++m4trace:configure.ac:14: -1- AC_SUBST([INTLTOOL_PONG_RULE]) ++m4trace:configure.ac:14: -1- AC_SUBST_TRACE([INTLTOOL_PONG_RULE]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_PONG_RULE$]) ++m4trace:configure.ac:14: -1- AC_SUBST([INTLTOOL_SERVER_RULE]) ++m4trace:configure.ac:14: -1- AC_SUBST_TRACE([INTLTOOL_SERVER_RULE]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_SERVER_RULE$]) ++m4trace:configure.ac:14: -1- AC_SUBST([INTLTOOL_SHEET_RULE]) ++m4trace:configure.ac:14: -1- AC_SUBST_TRACE([INTLTOOL_SHEET_RULE]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_SHEET_RULE$]) ++m4trace:configure.ac:14: -1- AC_SUBST([INTLTOOL_SOUNDLIST_RULE]) ++m4trace:configure.ac:14: -1- AC_SUBST_TRACE([INTLTOOL_SOUNDLIST_RULE]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_SOUNDLIST_RULE$]) ++m4trace:configure.ac:14: -1- AC_SUBST([INTLTOOL_UI_RULE]) ++m4trace:configure.ac:14: -1- AC_SUBST_TRACE([INTLTOOL_UI_RULE]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_UI_RULE$]) ++m4trace:configure.ac:14: -1- AC_SUBST([INTLTOOL_XAM_RULE]) ++m4trace:configure.ac:14: -1- AC_SUBST_TRACE([INTLTOOL_XAM_RULE]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_XAM_RULE$]) ++m4trace:configure.ac:14: -1- AC_SUBST([INTLTOOL_KBD_RULE]) ++m4trace:configure.ac:14: -1- AC_SUBST_TRACE([INTLTOOL_KBD_RULE]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_KBD_RULE$]) ++m4trace:configure.ac:14: -1- AC_SUBST([INTLTOOL_XML_RULE]) ++m4trace:configure.ac:14: -1- AC_SUBST_TRACE([INTLTOOL_XML_RULE]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_XML_RULE$]) ++m4trace:configure.ac:14: -1- AC_SUBST([INTLTOOL_XML_NOMERGE_RULE]) ++m4trace:configure.ac:14: -1- AC_SUBST_TRACE([INTLTOOL_XML_NOMERGE_RULE]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_XML_NOMERGE_RULE$]) ++m4trace:configure.ac:14: -1- AC_SUBST([INTLTOOL_CAVES_RULE]) ++m4trace:configure.ac:14: -1- AC_SUBST_TRACE([INTLTOOL_CAVES_RULE]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_CAVES_RULE$]) ++m4trace:configure.ac:14: -1- AC_SUBST([INTLTOOL_SCHEMAS_RULE]) ++m4trace:configure.ac:14: -1- AC_SUBST_TRACE([INTLTOOL_SCHEMAS_RULE]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_SCHEMAS_RULE$]) ++m4trace:configure.ac:14: -1- AC_SUBST([INTLTOOL_THEME_RULE]) ++m4trace:configure.ac:14: -1- AC_SUBST_TRACE([INTLTOOL_THEME_RULE]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_THEME_RULE$]) ++m4trace:configure.ac:14: -1- AC_SUBST([INTLTOOL_SERVICE_RULE]) ++m4trace:configure.ac:14: -1- AC_SUBST_TRACE([INTLTOOL_SERVICE_RULE]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_SERVICE_RULE$]) ++m4trace:configure.ac:14: -1- AC_SUBST([INTLTOOL_POLICY_RULE]) ++m4trace:configure.ac:14: -1- AC_SUBST_TRACE([INTLTOOL_POLICY_RULE]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_POLICY_RULE$]) ++m4trace:configure.ac:14: -1- AC_SUBST([XGETTEXT]) ++m4trace:configure.ac:14: -1- AC_SUBST_TRACE([XGETTEXT]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^XGETTEXT$]) ++m4trace:configure.ac:14: -1- AC_SUBST([MSGMERGE]) ++m4trace:configure.ac:14: -1- AC_SUBST_TRACE([MSGMERGE]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^MSGMERGE$]) ++m4trace:configure.ac:14: -1- AC_SUBST([MSGFMT]) ++m4trace:configure.ac:14: -1- AC_SUBST_TRACE([MSGFMT]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^MSGFMT$]) ++m4trace:configure.ac:14: -1- AC_SUBST([INTLTOOL_EXTRACT], ['$(top_builddir)/intltool-extract']) ++m4trace:configure.ac:14: -1- AC_SUBST_TRACE([INTLTOOL_EXTRACT]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_EXTRACT$]) ++m4trace:configure.ac:14: -1- AC_SUBST([INTLTOOL_MERGE], ['$(top_builddir)/intltool-merge']) ++m4trace:configure.ac:14: -1- AC_SUBST_TRACE([INTLTOOL_MERGE]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_MERGE$]) ++m4trace:configure.ac:14: -1- AC_SUBST([INTLTOOL_UPDATE], ['$(top_builddir)/intltool-update']) ++m4trace:configure.ac:14: -1- AC_SUBST_TRACE([INTLTOOL_UPDATE]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_UPDATE$]) ++m4trace:configure.ac:14: -1- AC_SUBST([INTLTOOL_PERL]) ++m4trace:configure.ac:14: -1- AC_SUBST_TRACE([INTLTOOL_PERL]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_PERL$]) ++m4trace:configure.ac:14: -1- AC_SUBST([ALL_LINGUAS]) ++m4trace:configure.ac:14: -1- AC_SUBST_TRACE([ALL_LINGUAS]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^ALL_LINGUAS$]) ++m4trace:configure.ac:14: -1- AC_SUBST([DATADIRNAME]) ++m4trace:configure.ac:14: -1- AC_SUBST_TRACE([DATADIRNAME]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^DATADIRNAME$]) ++m4trace:configure.ac:16: -2- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from... ++aclocal.m4:494: GNOME_COMPILE_WARNINGS is expanded from... ++configure.ac:16: the top level]) ++m4trace:configure.ac:16: -1- _m4_warn([obsolete], [The macro `AC_TRY_COMPILE' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:2367: AC_TRY_COMPILE is expanded from... ++aclocal.m4:494: GNOME_COMPILE_WARNINGS is expanded from... ++configure.ac:16: the top level]) ++m4trace:configure.ac:16: -2- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from... ++aclocal.m4:494: GNOME_COMPILE_WARNINGS is expanded from... ++configure.ac:16: the top level]) ++m4trace:configure.ac:16: -1- AC_SUBST([WARN_CFLAGS]) ++m4trace:configure.ac:16: -1- AC_SUBST_TRACE([WARN_CFLAGS]) ++m4trace:configure.ac:16: -1- m4_pattern_allow([^WARN_CFLAGS$]) ++m4trace:configure.ac:17: -1- m4_pattern_forbid([^_?PKG_[A-Z_]+$]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) ++m4trace:configure.ac:17: -1- AC_SUBST([PKG_CONFIG]) ++m4trace:configure.ac:17: -1- AC_SUBST_TRACE([PKG_CONFIG]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^PKG_CONFIG$]) ++m4trace:configure.ac:17: -1- AC_SUBST([PKG_CONFIG]) ++m4trace:configure.ac:17: -1- AC_SUBST_TRACE([PKG_CONFIG]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^PKG_CONFIG$]) ++m4trace:configure.ac:17: -2- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from... ++m4/gnome-doc-utils.m4:3: GNOME_DOC_DEFINES is expanded from... ++m4/gnome-doc-utils.m4:38: GNOME_DOC_INIT is expanded from... ++configure.ac:17: the top level]) ++m4trace:configure.ac:17: -1- AC_SUBST([HELP_DIR]) ++m4trace:configure.ac:17: -1- AC_SUBST_TRACE([HELP_DIR]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^HELP_DIR$]) ++m4trace:configure.ac:17: -2- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from... ++m4/gnome-doc-utils.m4:3: GNOME_DOC_DEFINES is expanded from... ++m4/gnome-doc-utils.m4:38: GNOME_DOC_INIT is expanded from... ++configure.ac:17: the top level]) ++m4trace:configure.ac:17: -1- AC_SUBST([OMF_DIR]) ++m4trace:configure.ac:17: -1- AC_SUBST_TRACE([OMF_DIR]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^OMF_DIR$]) ++m4trace:configure.ac:17: -2- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from... ++m4/gnome-doc-utils.m4:3: GNOME_DOC_DEFINES is expanded from... ++m4/gnome-doc-utils.m4:38: GNOME_DOC_INIT is expanded from... ++configure.ac:17: the top level]) ++m4trace:configure.ac:17: -1- AC_SUBST([DOC_USER_FORMATS]) ++m4trace:configure.ac:17: -1- AC_SUBST_TRACE([DOC_USER_FORMATS]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^DOC_USER_FORMATS$]) ++m4trace:configure.ac:17: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from... ++../../lib/autoconf/general.m4:1364: AC_ARG_ENABLE is expanded from... ++m4/gnome-doc-utils.m4:3: GNOME_DOC_DEFINES is expanded from... ++m4/gnome-doc-utils.m4:38: GNOME_DOC_INIT is expanded from... ++configure.ac:17: the top level]) ++m4trace:configure.ac:17: -1- AM_CONDITIONAL([ENABLE_SK], [test "$gdu_cv_have_gdu" = "yes" -a "$enable_scrollkeeper" = "yes"]) ++m4trace:configure.ac:17: -1- AC_SUBST([ENABLE_SK_TRUE]) ++m4trace:configure.ac:17: -1- AC_SUBST_TRACE([ENABLE_SK_TRUE]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^ENABLE_SK_TRUE$]) ++m4trace:configure.ac:17: -1- AC_SUBST([ENABLE_SK_FALSE]) ++m4trace:configure.ac:17: -1- AC_SUBST_TRACE([ENABLE_SK_FALSE]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^ENABLE_SK_FALSE$]) ++m4trace:configure.ac:17: -1- AC_SUBST([DISTCHECK_CONFIGURE_FLAGS]) ++m4trace:configure.ac:17: -1- AC_SUBST_TRACE([DISTCHECK_CONFIGURE_FLAGS]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^DISTCHECK_CONFIGURE_FLAGS$]) ++m4trace:configure.ac:17: -1- AM_CONDITIONAL([HAVE_GNOME_DOC_UTILS], [test "$gdu_cv_have_gdu" = "yes"]) ++m4trace:configure.ac:17: -1- AC_SUBST([HAVE_GNOME_DOC_UTILS_TRUE]) ++m4trace:configure.ac:17: -1- AC_SUBST_TRACE([HAVE_GNOME_DOC_UTILS_TRUE]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^HAVE_GNOME_DOC_UTILS_TRUE$]) ++m4trace:configure.ac:17: -1- AC_SUBST([HAVE_GNOME_DOC_UTILS_FALSE]) ++m4trace:configure.ac:17: -1- AC_SUBST_TRACE([HAVE_GNOME_DOC_UTILS_FALSE]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^HAVE_GNOME_DOC_UTILS_FALSE$]) ++m4trace:configure.ac:19: -1- AC_SUBST([GLIB_GENMARSHAL]) ++m4trace:configure.ac:19: -1- AC_SUBST_TRACE([GLIB_GENMARSHAL]) ++m4trace:configure.ac:19: -1- m4_pattern_allow([^GLIB_GENMARSHAL$]) ++m4trace:configure.ac:45: -1- AC_SUBST([GETTEXT_PACKAGE]) ++m4trace:configure.ac:45: -1- AC_SUBST_TRACE([GETTEXT_PACKAGE]) ++m4trace:configure.ac:45: -1- m4_pattern_allow([^GETTEXT_PACKAGE$]) ++m4trace:configure.ac:46: -1- AC_DEFINE_TRACE_LITERAL([GETTEXT_PACKAGE]) ++m4trace:configure.ac:46: -1- m4_pattern_allow([^GETTEXT_PACKAGE$]) ++m4trace:configure.ac:46: -1- AH_OUTPUT([GETTEXT_PACKAGE], [/* foo */ ++#undef GETTEXT_PACKAGE]) ++m4trace:configure.ac:48: -1- AH_OUTPUT([HAVE_LOCALE_H], [/* Define to 1 if you have the header file. */ ++#undef HAVE_LOCALE_H]) ++m4trace:configure.ac:48: -1- _m4_warn([obsolete], [The macro `AC_TRY_LINK' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:2414: AC_TRY_LINK is expanded from... ++../../lib/m4sugar/m4sh.m4:516: AS_IF is expanded from... ++../../lib/autoconf/general.m4:1898: AC_CACHE_VAL is expanded from... ++../../lib/autoconf/general.m4:1911: AC_CACHE_CHECK is expanded from... ++aclocal.m4:105: GLIB_LC_MESSAGES is expanded from... ++aclocal.m4:369: GLIB_GNU_GETTEXT is expanded from... ++aclocal.m4:469: AM_GLIB_GNU_GETTEXT is expanded from... ++configure.ac:48: the top level]) ++m4trace:configure.ac:48: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LC_MESSAGES]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^HAVE_LC_MESSAGES$]) ++m4trace:configure.ac:48: -1- AH_OUTPUT([HAVE_LC_MESSAGES], [/* Define if your file defines LC_MESSAGES. */ ++#undef HAVE_LC_MESSAGES]) ++m4trace:configure.ac:48: -1- AC_SUBST([USE_NLS]) ++m4trace:configure.ac:48: -1- AC_SUBST_TRACE([USE_NLS]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^USE_NLS$]) ++m4trace:configure.ac:48: -1- _m4_warn([obsolete], [The macro `AC_TRY_LINK' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:2414: AC_TRY_LINK is expanded from... ++../../lib/m4sugar/m4sh.m4:516: AS_IF is expanded from... ++../../lib/autoconf/general.m4:1898: AC_CACHE_VAL is expanded from... ++../../lib/autoconf/general.m4:1911: AC_CACHE_CHECK is expanded from... ++../../lib/m4sugar/m4sh.m4:516: AS_IF is expanded from... ++../../lib/autoconf/headers.m4:87: AC_CHECK_HEADER is expanded from... ++aclocal.m4:159: GLIB_WITH_NLS is expanded from... ++aclocal.m4:369: GLIB_GNU_GETTEXT is expanded from... ++aclocal.m4:469: AM_GLIB_GNU_GETTEXT is expanded from... ++configure.ac:48: the top level]) ++m4trace:configure.ac:48: -1- _m4_warn([obsolete], [The macro `AC_TRY_LINK' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:2414: AC_TRY_LINK is expanded from... ++../../lib/m4sugar/m4sh.m4:516: AS_IF is expanded from... ++../../lib/autoconf/general.m4:1898: AC_CACHE_VAL is expanded from... ++../../lib/autoconf/general.m4:1911: AC_CACHE_CHECK is expanded from... ++../../lib/m4sugar/m4sh.m4:516: AS_IF is expanded from... ++../../lib/autoconf/headers.m4:87: AC_CHECK_HEADER is expanded from... ++aclocal.m4:159: GLIB_WITH_NLS is expanded from... ++aclocal.m4:369: GLIB_GNU_GETTEXT is expanded from... ++aclocal.m4:469: AM_GLIB_GNU_GETTEXT is expanded from... ++configure.ac:48: the top level]) ++m4trace:configure.ac:48: -1- AH_OUTPUT([HAVE_BIND_TEXTDOMAIN_CODESET], [/* Define to 1 if you have the `bind_textdomain_codeset\' function. */ ++#undef HAVE_BIND_TEXTDOMAIN_CODESET]) ++m4trace:configure.ac:48: -1- AH_OUTPUT([HAVE_BIND_TEXTDOMAIN_CODESET], [/* Define to 1 if you have the `bind_textdomain_codeset\' function. */ ++#undef HAVE_BIND_TEXTDOMAIN_CODESET]) ++m4trace:configure.ac:48: -1- AC_DEFINE_TRACE_LITERAL([HAVE_GETTEXT]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^HAVE_GETTEXT$]) ++m4trace:configure.ac:48: -1- AH_OUTPUT([HAVE_GETTEXT], [/* Define if the GNU gettext() function is already present or preinstalled. */ ++#undef HAVE_GETTEXT]) ++m4trace:configure.ac:48: -1- AC_SUBST([MSGFMT]) ++m4trace:configure.ac:48: -1- AC_SUBST_TRACE([MSGFMT]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^MSGFMT$]) ++m4trace:configure.ac:48: -1- AH_OUTPUT([HAVE_DCGETTEXT], [/* Define to 1 if you have the `dcgettext\' function. */ ++#undef HAVE_DCGETTEXT]) ++m4trace:configure.ac:48: -1- AC_SUBST([MSGFMT_OPTS]) ++m4trace:configure.ac:48: -1- AC_SUBST_TRACE([MSGFMT_OPTS]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^MSGFMT_OPTS$]) ++m4trace:configure.ac:48: -1- AC_SUBST([GMSGFMT]) ++m4trace:configure.ac:48: -1- AC_SUBST_TRACE([GMSGFMT]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^GMSGFMT$]) ++m4trace:configure.ac:48: -1- AC_SUBST([XGETTEXT]) ++m4trace:configure.ac:48: -1- AC_SUBST_TRACE([XGETTEXT]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^XGETTEXT$]) ++m4trace:configure.ac:48: -1- _m4_warn([obsolete], [The macro `AC_TRY_LINK' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:2414: AC_TRY_LINK is expanded from... ++../../lib/m4sugar/m4sh.m4:516: AS_IF is expanded from... ++../../lib/autoconf/headers.m4:87: AC_CHECK_HEADER is expanded from... ++aclocal.m4:159: GLIB_WITH_NLS is expanded from... ++aclocal.m4:369: GLIB_GNU_GETTEXT is expanded from... ++aclocal.m4:469: AM_GLIB_GNU_GETTEXT is expanded from... ++configure.ac:48: the top level]) ++m4trace:configure.ac:48: -1- AC_DEFINE_TRACE_LITERAL([ENABLE_NLS]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^ENABLE_NLS$]) ++m4trace:configure.ac:48: -1- AH_OUTPUT([ENABLE_NLS], [/* always defined to indicate that i18n is enabled */ ++#undef ENABLE_NLS]) ++m4trace:configure.ac:48: -1- _m4_warn([obsolete], [The macro `AC_OUTPUT_COMMANDS' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/status.m4:848: AC_OUTPUT_COMMANDS is expanded from... ++aclocal.m4:159: GLIB_WITH_NLS is expanded from... ++aclocal.m4:369: GLIB_GNU_GETTEXT is expanded from... ++aclocal.m4:469: AM_GLIB_GNU_GETTEXT is expanded from... ++configure.ac:48: the top level]) ++m4trace:configure.ac:48: -1- AC_SUBST([CATALOGS]) ++m4trace:configure.ac:48: -1- AC_SUBST_TRACE([CATALOGS]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^CATALOGS$]) ++m4trace:configure.ac:48: -1- AC_SUBST([CATOBJEXT]) ++m4trace:configure.ac:48: -1- AC_SUBST_TRACE([CATOBJEXT]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^CATOBJEXT$]) ++m4trace:configure.ac:48: -1- AC_SUBST([DATADIRNAME]) ++m4trace:configure.ac:48: -1- AC_SUBST_TRACE([DATADIRNAME]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^DATADIRNAME$]) ++m4trace:configure.ac:48: -1- AC_SUBST([GMOFILES]) ++m4trace:configure.ac:48: -1- AC_SUBST_TRACE([GMOFILES]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^GMOFILES$]) ++m4trace:configure.ac:48: -1- AC_SUBST([INSTOBJEXT]) ++m4trace:configure.ac:48: -1- AC_SUBST_TRACE([INSTOBJEXT]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^INSTOBJEXT$]) ++m4trace:configure.ac:48: -1- AC_SUBST([INTLLIBS]) ++m4trace:configure.ac:48: -1- AC_SUBST_TRACE([INTLLIBS]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^INTLLIBS$]) ++m4trace:configure.ac:48: -1- AC_SUBST([PO_IN_DATADIR_TRUE]) ++m4trace:configure.ac:48: -1- AC_SUBST_TRACE([PO_IN_DATADIR_TRUE]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^PO_IN_DATADIR_TRUE$]) ++m4trace:configure.ac:48: -1- AC_SUBST([PO_IN_DATADIR_FALSE]) ++m4trace:configure.ac:48: -1- AC_SUBST_TRACE([PO_IN_DATADIR_FALSE]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^PO_IN_DATADIR_FALSE$]) ++m4trace:configure.ac:48: -1- AC_SUBST([POFILES]) ++m4trace:configure.ac:48: -1- AC_SUBST_TRACE([POFILES]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^POFILES$]) ++m4trace:configure.ac:48: -1- AC_SUBST([POSUB]) ++m4trace:configure.ac:48: -1- AC_SUBST_TRACE([POSUB]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^POSUB$]) ++m4trace:configure.ac:48: -1- AC_SUBST([MKINSTALLDIRS]) ++m4trace:configure.ac:48: -1- AC_SUBST_TRACE([MKINSTALLDIRS]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^MKINSTALLDIRS$]) ++m4trace:configure.ac:74: -1- AC_SUBST([GLIB_REQUIRED]) ++m4trace:configure.ac:74: -1- AC_SUBST_TRACE([GLIB_REQUIRED]) ++m4trace:configure.ac:74: -1- m4_pattern_allow([^GLIB_REQUIRED$]) ++m4trace:configure.ac:75: -1- AC_SUBST([GTK_REQUIRED]) ++m4trace:configure.ac:75: -1- AC_SUBST_TRACE([GTK_REQUIRED]) ++m4trace:configure.ac:75: -1- m4_pattern_allow([^GTK_REQUIRED$]) ++m4trace:configure.ac:76: -1- AC_SUBST([GDK_REQUIRED]) ++m4trace:configure.ac:76: -1- AC_SUBST_TRACE([GDK_REQUIRED]) ++m4trace:configure.ac:76: -1- m4_pattern_allow([^GDK_REQUIRED$]) ++m4trace:configure.ac:77: -1- AC_SUBST([LIBGNOME_REQUIRED]) ++m4trace:configure.ac:77: -1- AC_SUBST_TRACE([LIBGNOME_REQUIRED]) ++m4trace:configure.ac:77: -1- m4_pattern_allow([^LIBGNOME_REQUIRED$]) ++m4trace:configure.ac:78: -1- AC_SUBST([LIBGNOMEUI_REQUIRED]) ++m4trace:configure.ac:78: -1- AC_SUBST_TRACE([LIBGNOMEUI_REQUIRED]) ++m4trace:configure.ac:78: -1- m4_pattern_allow([^LIBGNOMEUI_REQUIRED$]) ++m4trace:configure.ac:79: -1- AC_SUBST([HAL_REQUIRED]) ++m4trace:configure.ac:79: -1- AC_SUBST_TRACE([HAL_REQUIRED]) ++m4trace:configure.ac:79: -1- m4_pattern_allow([^HAL_REQUIRED$]) ++m4trace:configure.ac:80: -1- AC_SUBST([DBUS_REQUIRED]) ++m4trace:configure.ac:80: -1- AC_SUBST_TRACE([DBUS_REQUIRED]) ++m4trace:configure.ac:80: -1- m4_pattern_allow([^DBUS_REQUIRED$]) ++m4trace:configure.ac:81: -1- AC_SUBST([LIBGLADE_REQUIRED]) ++m4trace:configure.ac:81: -1- AC_SUBST_TRACE([LIBGLADE_REQUIRED]) ++m4trace:configure.ac:81: -1- m4_pattern_allow([^LIBGLADE_REQUIRED$]) ++m4trace:configure.ac:82: -1- AC_SUBST([LIBNOTIFY_REQUIRED]) ++m4trace:configure.ac:82: -1- AC_SUBST_TRACE([LIBNOTIFY_REQUIRED]) ++m4trace:configure.ac:82: -1- m4_pattern_allow([^LIBNOTIFY_REQUIRED$]) ++m4trace:configure.ac:83: -1- AC_SUBST([LIBWNCK_REQUIRED]) ++m4trace:configure.ac:83: -1- AC_SUBST_TRACE([LIBWNCK_REQUIRED]) ++m4trace:configure.ac:83: -1- m4_pattern_allow([^LIBWNCK_REQUIRED$]) ++m4trace:configure.ac:84: -1- AC_SUBST([CAIRO_REQUIRED]) ++m4trace:configure.ac:84: -1- AC_SUBST_TRACE([CAIRO_REQUIRED]) ++m4trace:configure.ac:84: -1- m4_pattern_allow([^CAIRO_REQUIRED$]) ++m4trace:configure.ac:85: -1- AC_SUBST([UNIQUE_REQUIRED]) ++m4trace:configure.ac:85: -1- AC_SUBST_TRACE([UNIQUE_REQUIRED]) ++m4trace:configure.ac:85: -1- m4_pattern_allow([^UNIQUE_REQUIRED$]) ++m4trace:configure.ac:86: -1- AC_SUBST([LIBPANEL_REQUIRED]) ++m4trace:configure.ac:86: -1- AC_SUBST_TRACE([LIBPANEL_REQUIRED]) ++m4trace:configure.ac:86: -1- m4_pattern_allow([^LIBPANEL_REQUIRED$]) ++m4trace:configure.ac:87: -1- AC_SUBST([GSTREAMER_REQUIRED]) ++m4trace:configure.ac:87: -1- AC_SUBST_TRACE([GSTREAMER_REQUIRED]) ++m4trace:configure.ac:87: -1- m4_pattern_allow([^GSTREAMER_REQUIRED$]) ++m4trace:configure.ac:88: -1- AC_SUBST([XRANDR_REQUIRED]) ++m4trace:configure.ac:88: -1- AC_SUBST_TRACE([XRANDR_REQUIRED]) ++m4trace:configure.ac:88: -1- m4_pattern_allow([^XRANDR_REQUIRED$]) ++m4trace:configure.ac:89: -1- AC_SUBST([POLKIT_GNOME_REQUIRED]) ++m4trace:configure.ac:89: -1- AC_SUBST_TRACE([POLKIT_GNOME_REQUIRED]) ++m4trace:configure.ac:89: -1- m4_pattern_allow([^POLKIT_GNOME_REQUIRED$]) ++m4trace:configure.ac:94: -1- AC_SUBST([GLIB_CFLAGS]) ++m4trace:configure.ac:94: -1- AC_SUBST_TRACE([GLIB_CFLAGS]) ++m4trace:configure.ac:94: -1- m4_pattern_allow([^GLIB_CFLAGS$]) ++m4trace:configure.ac:94: -1- AC_SUBST([GLIB_LIBS]) ++m4trace:configure.ac:94: -1- AC_SUBST_TRACE([GLIB_LIBS]) ++m4trace:configure.ac:94: -1- m4_pattern_allow([^GLIB_LIBS$]) ++m4trace:configure.ac:95: -1- AC_SUBST([GLIB_CFLAGS]) ++m4trace:configure.ac:95: -1- AC_SUBST_TRACE([GLIB_CFLAGS]) ++m4trace:configure.ac:95: -1- m4_pattern_allow([^GLIB_CFLAGS$]) ++m4trace:configure.ac:96: -1- AC_SUBST([GLIB_LIBS]) ++m4trace:configure.ac:96: -1- AC_SUBST_TRACE([GLIB_LIBS]) ++m4trace:configure.ac:96: -1- m4_pattern_allow([^GLIB_LIBS$]) ++m4trace:configure.ac:98: -1- AC_SUBST([HAL_CFLAGS]) ++m4trace:configure.ac:98: -1- AC_SUBST_TRACE([HAL_CFLAGS]) ++m4trace:configure.ac:98: -1- m4_pattern_allow([^HAL_CFLAGS$]) ++m4trace:configure.ac:98: -1- AC_SUBST([HAL_LIBS]) ++m4trace:configure.ac:98: -1- AC_SUBST_TRACE([HAL_LIBS]) ++m4trace:configure.ac:98: -1- m4_pattern_allow([^HAL_LIBS$]) ++m4trace:configure.ac:99: -1- AC_SUBST([HAL_CFLAGS]) ++m4trace:configure.ac:99: -1- AC_SUBST_TRACE([HAL_CFLAGS]) ++m4trace:configure.ac:99: -1- m4_pattern_allow([^HAL_CFLAGS$]) ++m4trace:configure.ac:100: -1- AC_SUBST([HAL_LIBS]) ++m4trace:configure.ac:100: -1- AC_SUBST_TRACE([HAL_LIBS]) ++m4trace:configure.ac:100: -1- m4_pattern_allow([^HAL_LIBS$]) ++m4trace:configure.ac:102: -1- AC_SUBST([GSTREAMER_CFLAGS]) ++m4trace:configure.ac:102: -1- AC_SUBST_TRACE([GSTREAMER_CFLAGS]) ++m4trace:configure.ac:102: -1- m4_pattern_allow([^GSTREAMER_CFLAGS$]) ++m4trace:configure.ac:102: -1- AC_SUBST([GSTREAMER_LIBS]) ++m4trace:configure.ac:102: -1- AC_SUBST_TRACE([GSTREAMER_LIBS]) ++m4trace:configure.ac:102: -1- m4_pattern_allow([^GSTREAMER_LIBS$]) ++m4trace:configure.ac:103: -1- AC_SUBST([GSTREAMER_CFLAGS]) ++m4trace:configure.ac:103: -1- AC_SUBST_TRACE([GSTREAMER_CFLAGS]) ++m4trace:configure.ac:103: -1- m4_pattern_allow([^GSTREAMER_CFLAGS$]) ++m4trace:configure.ac:104: -1- AC_SUBST([GSTREAMER_LIBS]) ++m4trace:configure.ac:104: -1- AC_SUBST_TRACE([GSTREAMER_LIBS]) ++m4trace:configure.ac:104: -1- m4_pattern_allow([^GSTREAMER_LIBS$]) ++m4trace:configure.ac:106: -1- AC_SUBST([DBUS_CFLAGS]) ++m4trace:configure.ac:106: -1- AC_SUBST_TRACE([DBUS_CFLAGS]) ++m4trace:configure.ac:106: -1- m4_pattern_allow([^DBUS_CFLAGS$]) ++m4trace:configure.ac:106: -1- AC_SUBST([DBUS_LIBS]) ++m4trace:configure.ac:106: -1- AC_SUBST_TRACE([DBUS_LIBS]) ++m4trace:configure.ac:106: -1- m4_pattern_allow([^DBUS_LIBS$]) ++m4trace:configure.ac:110: -1- AC_SUBST([DBUS_CFLAGS]) ++m4trace:configure.ac:110: -1- AC_SUBST_TRACE([DBUS_CFLAGS]) ++m4trace:configure.ac:110: -1- m4_pattern_allow([^DBUS_CFLAGS$]) ++m4trace:configure.ac:111: -1- AC_SUBST([DBUS_LIBS]) ++m4trace:configure.ac:111: -1- AC_SUBST_TRACE([DBUS_LIBS]) ++m4trace:configure.ac:111: -1- m4_pattern_allow([^DBUS_LIBS$]) ++m4trace:configure.ac:113: -1- AC_SUBST([GNOME_CFLAGS]) ++m4trace:configure.ac:113: -1- AC_SUBST_TRACE([GNOME_CFLAGS]) ++m4trace:configure.ac:113: -1- m4_pattern_allow([^GNOME_CFLAGS$]) ++m4trace:configure.ac:113: -1- AC_SUBST([GNOME_LIBS]) ++m4trace:configure.ac:113: -1- AC_SUBST_TRACE([GNOME_LIBS]) ++m4trace:configure.ac:113: -1- m4_pattern_allow([^GNOME_LIBS$]) ++m4trace:configure.ac:121: -1- AC_SUBST([GNOME_CFLAGS]) ++m4trace:configure.ac:121: -1- AC_SUBST_TRACE([GNOME_CFLAGS]) ++m4trace:configure.ac:121: -1- m4_pattern_allow([^GNOME_CFLAGS$]) ++m4trace:configure.ac:122: -1- AC_SUBST([GNOME_LIBS]) ++m4trace:configure.ac:122: -1- AC_SUBST_TRACE([GNOME_LIBS]) ++m4trace:configure.ac:122: -1- m4_pattern_allow([^GNOME_LIBS$]) ++m4trace:configure.ac:124: -1- AC_SUBST([GDK_CFLAGS]) ++m4trace:configure.ac:124: -1- AC_SUBST_TRACE([GDK_CFLAGS]) ++m4trace:configure.ac:124: -1- m4_pattern_allow([^GDK_CFLAGS$]) ++m4trace:configure.ac:124: -1- AC_SUBST([GDK_LIBS]) ++m4trace:configure.ac:124: -1- AC_SUBST_TRACE([GDK_LIBS]) ++m4trace:configure.ac:124: -1- m4_pattern_allow([^GDK_LIBS$]) ++m4trace:configure.ac:127: -1- AC_SUBST([GDK_CFLAGS]) ++m4trace:configure.ac:127: -1- AC_SUBST_TRACE([GDK_CFLAGS]) ++m4trace:configure.ac:127: -1- m4_pattern_allow([^GDK_CFLAGS$]) ++m4trace:configure.ac:128: -1- AC_SUBST([GDK_LIBS]) ++m4trace:configure.ac:128: -1- AC_SUBST_TRACE([GDK_LIBS]) ++m4trace:configure.ac:128: -1- m4_pattern_allow([^GDK_LIBS$]) ++m4trace:configure.ac:130: -1- AC_SUBST([XRANDR_CFLAGS]) ++m4trace:configure.ac:130: -1- AC_SUBST_TRACE([XRANDR_CFLAGS]) ++m4trace:configure.ac:130: -1- m4_pattern_allow([^XRANDR_CFLAGS$]) ++m4trace:configure.ac:130: -1- AC_SUBST([XRANDR_LIBS]) ++m4trace:configure.ac:130: -1- AC_SUBST_TRACE([XRANDR_LIBS]) ++m4trace:configure.ac:130: -1- m4_pattern_allow([^XRANDR_LIBS$]) ++m4trace:configure.ac:133: -1- AC_SUBST([XRANDR_CFLAGS]) ++m4trace:configure.ac:133: -1- AC_SUBST_TRACE([XRANDR_CFLAGS]) ++m4trace:configure.ac:133: -1- m4_pattern_allow([^XRANDR_CFLAGS$]) ++m4trace:configure.ac:134: -1- AC_SUBST([XRANDR_LIBS]) ++m4trace:configure.ac:134: -1- AC_SUBST_TRACE([XRANDR_LIBS]) ++m4trace:configure.ac:134: -1- m4_pattern_allow([^XRANDR_LIBS$]) ++m4trace:configure.ac:136: -1- AC_SUBST([GCONFTOOL]) ++m4trace:configure.ac:136: -1- AC_SUBST_TRACE([GCONFTOOL]) ++m4trace:configure.ac:136: -1- m4_pattern_allow([^GCONFTOOL$]) ++m4trace:configure.ac:137: -2- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from... ++aclocal.m4:21: AM_GCONF_SOURCE_2 is expanded from... ++configure.ac:137: the top level]) ++m4trace:configure.ac:137: -1- AC_SUBST([GCONF_SCHEMA_CONFIG_SOURCE]) ++m4trace:configure.ac:137: -1- AC_SUBST_TRACE([GCONF_SCHEMA_CONFIG_SOURCE]) ++m4trace:configure.ac:137: -1- m4_pattern_allow([^GCONF_SCHEMA_CONFIG_SOURCE$]) ++m4trace:configure.ac:137: -2- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from... ++aclocal.m4:21: AM_GCONF_SOURCE_2 is expanded from... ++configure.ac:137: the top level]) ++m4trace:configure.ac:137: -1- AC_SUBST([GCONF_SCHEMA_FILE_DIR]) ++m4trace:configure.ac:137: -1- AC_SUBST_TRACE([GCONF_SCHEMA_FILE_DIR]) ++m4trace:configure.ac:137: -1- m4_pattern_allow([^GCONF_SCHEMA_FILE_DIR$]) ++m4trace:configure.ac:137: -1- AM_CONDITIONAL([GCONF_SCHEMAS_INSTALL], [test "$enable_schemas_install" != no]) ++m4trace:configure.ac:137: -1- AC_SUBST([GCONF_SCHEMAS_INSTALL_TRUE]) ++m4trace:configure.ac:137: -1- AC_SUBST_TRACE([GCONF_SCHEMAS_INSTALL_TRUE]) ++m4trace:configure.ac:137: -1- m4_pattern_allow([^GCONF_SCHEMAS_INSTALL_TRUE$]) ++m4trace:configure.ac:137: -1- AC_SUBST([GCONF_SCHEMAS_INSTALL_FALSE]) ++m4trace:configure.ac:137: -1- AC_SUBST_TRACE([GCONF_SCHEMAS_INSTALL_FALSE]) ++m4trace:configure.ac:137: -1- m4_pattern_allow([^GCONF_SCHEMAS_INSTALL_FALSE$]) ++m4trace:configure.ac:139: -1- AC_SUBST([XMKMF]) ++m4trace:configure.ac:139: -1- AC_SUBST_TRACE([XMKMF]) ++m4trace:configure.ac:139: -1- m4_pattern_allow([^XMKMF$]) ++m4trace:configure.ac:139: -1- AC_DEFINE_TRACE_LITERAL([X_DISPLAY_MISSING]) ++m4trace:configure.ac:139: -1- m4_pattern_allow([^X_DISPLAY_MISSING$]) ++m4trace:configure.ac:139: -1- AH_OUTPUT([X_DISPLAY_MISSING], [/* Define to 1 if the X Window System is missing or not being used. */ ++#undef X_DISPLAY_MISSING]) ++m4trace:configure.ac:139: -1- AC_SUBST([X_CFLAGS]) ++m4trace:configure.ac:139: -1- AC_SUBST_TRACE([X_CFLAGS]) ++m4trace:configure.ac:139: -1- m4_pattern_allow([^X_CFLAGS$]) ++m4trace:configure.ac:139: -1- AC_SUBST([X_PRE_LIBS]) ++m4trace:configure.ac:139: -1- AC_SUBST_TRACE([X_PRE_LIBS]) ++m4trace:configure.ac:139: -1- m4_pattern_allow([^X_PRE_LIBS$]) ++m4trace:configure.ac:139: -1- AC_SUBST([X_LIBS]) ++m4trace:configure.ac:139: -1- AC_SUBST_TRACE([X_LIBS]) ++m4trace:configure.ac:139: -1- m4_pattern_allow([^X_LIBS$]) ++m4trace:configure.ac:139: -1- AC_SUBST([X_EXTRA_LIBS]) ++m4trace:configure.ac:139: -1- AC_SUBST_TRACE([X_EXTRA_LIBS]) ++m4trace:configure.ac:139: -1- m4_pattern_allow([^X_EXTRA_LIBS$]) ++m4trace:configure.ac:146: -1- AC_SUBST([SYSCONFDIR], [$sysconfdir]) ++m4trace:configure.ac:146: -1- AC_SUBST_TRACE([SYSCONFDIR]) ++m4trace:configure.ac:146: -1- m4_pattern_allow([^SYSCONFDIR$]) ++m4trace:configure.ac:147: -1- AC_SUBST([DATADIR], [$datadir]) ++m4trace:configure.ac:147: -1- AC_SUBST_TRACE([DATADIR]) ++m4trace:configure.ac:147: -1- m4_pattern_allow([^DATADIR$]) ++m4trace:configure.ac:148: -1- AC_SUBST([BINDIR], [$bindir]) ++m4trace:configure.ac:148: -1- AC_SUBST_TRACE([BINDIR]) ++m4trace:configure.ac:148: -1- m4_pattern_allow([^BINDIR$]) ++m4trace:configure.ac:149: -1- AC_SUBST([SBINDIR], [$sbindir]) ++m4trace:configure.ac:149: -1- AC_SUBST_TRACE([SBINDIR]) ++m4trace:configure.ac:149: -1- m4_pattern_allow([^SBINDIR$]) ++m4trace:configure.ac:163: -1- AC_SUBST([DOCDIR]) ++m4trace:configure.ac:163: -1- AC_SUBST_TRACE([DOCDIR]) ++m4trace:configure.ac:163: -1- m4_pattern_allow([^DOCDIR$]) ++m4trace:configure.ac:176: -1- AC_SUBST([POLKIT_CFLAGS]) ++m4trace:configure.ac:176: -1- AC_SUBST_TRACE([POLKIT_CFLAGS]) ++m4trace:configure.ac:176: -1- m4_pattern_allow([^POLKIT_CFLAGS$]) ++m4trace:configure.ac:176: -1- AC_SUBST([POLKIT_LIBS]) ++m4trace:configure.ac:176: -1- AC_SUBST_TRACE([POLKIT_LIBS]) ++m4trace:configure.ac:176: -1- m4_pattern_allow([^POLKIT_LIBS$]) ++m4trace:configure.ac:179: -1- AC_SUBST([POLKIT_CFLAGS]) ++m4trace:configure.ac:179: -1- AC_SUBST_TRACE([POLKIT_CFLAGS]) ++m4trace:configure.ac:179: -1- m4_pattern_allow([^POLKIT_CFLAGS$]) ++m4trace:configure.ac:180: -1- AC_SUBST([POLKIT_LIBS]) ++m4trace:configure.ac:180: -1- AC_SUBST_TRACE([POLKIT_LIBS]) ++m4trace:configure.ac:180: -1- m4_pattern_allow([^POLKIT_LIBS$]) ++m4trace:configure.ac:182: -1- AC_DEFINE_TRACE_LITERAL([HAVE_POLKIT]) ++m4trace:configure.ac:182: -1- m4_pattern_allow([^HAVE_POLKIT$]) ++m4trace:configure.ac:182: -1- AH_OUTPUT([HAVE_POLKIT], [/* Define if we use PolicyKit */ ++#undef HAVE_POLKIT]) ++m4trace:configure.ac:200: -1- AC_DEFINE_TRACE_LITERAL([HAVE_CHECK_FG]) ++m4trace:configure.ac:200: -1- m4_pattern_allow([^HAVE_CHECK_FG$]) ++m4trace:configure.ac:200: -1- AH_OUTPUT([HAVE_CHECK_FG], [/* Define if we want to use check-foreground-console */ ++#undef HAVE_CHECK_FG]) ++m4trace:configure.ac:218: -1- AC_DEFINE_TRACE_LITERAL([HAVE_XEVENTS]) ++m4trace:configure.ac:218: -1- m4_pattern_allow([^HAVE_XEVENTS$]) ++m4trace:configure.ac:218: -1- AH_OUTPUT([HAVE_XEVENTS], [/* Define if we use XEVENTS */ ++#undef HAVE_XEVENTS]) ++m4trace:configure.ac:236: -1- AC_DEFINE_TRACE_LITERAL([HAVE_TESTS]) ++m4trace:configure.ac:236: -1- m4_pattern_allow([^HAVE_TESTS$]) ++m4trace:configure.ac:236: -1- AH_OUTPUT([HAVE_TESTS], [/* Define if we want to use the self tests */ ++#undef HAVE_TESTS]) ++m4trace:configure.ac:241: -1- AM_CONDITIONAL([HAVE_TESTS], [test $have_tests = yes]) ++m4trace:configure.ac:241: -1- AC_SUBST([HAVE_TESTS_TRUE]) ++m4trace:configure.ac:241: -1- AC_SUBST_TRACE([HAVE_TESTS_TRUE]) ++m4trace:configure.ac:241: -1- m4_pattern_allow([^HAVE_TESTS_TRUE$]) ++m4trace:configure.ac:241: -1- AC_SUBST([HAVE_TESTS_FALSE]) ++m4trace:configure.ac:241: -1- AC_SUBST_TRACE([HAVE_TESTS_FALSE]) ++m4trace:configure.ac:241: -1- m4_pattern_allow([^HAVE_TESTS_FALSE$]) ++m4trace:configure.ac:254: -1- AC_SUBST([POLKIT_GNOME_CFLAGS]) ++m4trace:configure.ac:254: -1- AC_SUBST_TRACE([POLKIT_GNOME_CFLAGS]) ++m4trace:configure.ac:254: -1- m4_pattern_allow([^POLKIT_GNOME_CFLAGS$]) ++m4trace:configure.ac:254: -1- AC_SUBST([POLKIT_GNOME_LIBS]) ++m4trace:configure.ac:254: -1- AC_SUBST_TRACE([POLKIT_GNOME_LIBS]) ++m4trace:configure.ac:254: -1- m4_pattern_allow([^POLKIT_GNOME_LIBS$]) ++m4trace:configure.ac:256: -1- AC_SUBST([POLKIT_GNOME_CFLAGS]) ++m4trace:configure.ac:256: -1- AC_SUBST_TRACE([POLKIT_GNOME_CFLAGS]) ++m4trace:configure.ac:256: -1- m4_pattern_allow([^POLKIT_GNOME_CFLAGS$]) ++m4trace:configure.ac:257: -1- AC_SUBST([POLKIT_GNOME_LIBS]) ++m4trace:configure.ac:257: -1- AC_SUBST_TRACE([POLKIT_GNOME_LIBS]) ++m4trace:configure.ac:257: -1- m4_pattern_allow([^POLKIT_GNOME_LIBS$]) ++m4trace:configure.ac:259: -1- AC_DEFINE_TRACE_LITERAL([HAVE_GCONF_DEFAULTS]) ++m4trace:configure.ac:259: -1- m4_pattern_allow([^HAVE_GCONF_DEFAULTS$]) ++m4trace:configure.ac:259: -1- AH_OUTPUT([HAVE_GCONF_DEFAULTS], [/* Define if have policykit-gnome */ ++#undef HAVE_GCONF_DEFAULTS]) ++m4trace:configure.ac:264: -1- AM_CONDITIONAL([HAVE_GCONF_DEFAULTS], [test $have_gconfdefaults = yes]) ++m4trace:configure.ac:264: -1- AC_SUBST([HAVE_GCONF_DEFAULTS_TRUE]) ++m4trace:configure.ac:264: -1- AC_SUBST_TRACE([HAVE_GCONF_DEFAULTS_TRUE]) ++m4trace:configure.ac:264: -1- m4_pattern_allow([^HAVE_GCONF_DEFAULTS_TRUE$]) ++m4trace:configure.ac:264: -1- AC_SUBST([HAVE_GCONF_DEFAULTS_FALSE]) ++m4trace:configure.ac:264: -1- AC_SUBST_TRACE([HAVE_GCONF_DEFAULTS_FALSE]) ++m4trace:configure.ac:264: -1- m4_pattern_allow([^HAVE_GCONF_DEFAULTS_FALSE$]) ++m4trace:configure.ac:278: -1- AC_DEFINE_TRACE_LITERAL([HAVE_APPLETS]) ++m4trace:configure.ac:278: -1- m4_pattern_allow([^HAVE_APPLETS$]) ++m4trace:configure.ac:278: -1- AH_OUTPUT([HAVE_APPLETS], [/* Define if we are building applets */ ++#undef HAVE_APPLETS]) ++m4trace:configure.ac:283: -1- AM_CONDITIONAL([HAVE_APPLETS], [test $have_applets = yes]) ++m4trace:configure.ac:283: -1- AC_SUBST([HAVE_APPLETS_TRUE]) ++m4trace:configure.ac:283: -1- AC_SUBST_TRACE([HAVE_APPLETS_TRUE]) ++m4trace:configure.ac:283: -1- m4_pattern_allow([^HAVE_APPLETS_TRUE$]) ++m4trace:configure.ac:283: -1- AC_SUBST([HAVE_APPLETS_FALSE]) ++m4trace:configure.ac:283: -1- AC_SUBST_TRACE([HAVE_APPLETS_FALSE]) ++m4trace:configure.ac:283: -1- m4_pattern_allow([^HAVE_APPLETS_FALSE$]) ++m4trace:configure.ac:293: -1- AC_SUBST([XMLTO]) ++m4trace:configure.ac:293: -1- AC_SUBST_TRACE([XMLTO]) ++m4trace:configure.ac:293: -1- m4_pattern_allow([^XMLTO$]) ++m4trace:configure.ac:312: -1- AM_CONDITIONAL([DOCBOOK_DOCS_ENABLED], [test x$enable_docbook_docs = xyes]) ++m4trace:configure.ac:312: -1- AC_SUBST([DOCBOOK_DOCS_ENABLED_TRUE]) ++m4trace:configure.ac:312: -1- AC_SUBST_TRACE([DOCBOOK_DOCS_ENABLED_TRUE]) ++m4trace:configure.ac:312: -1- m4_pattern_allow([^DOCBOOK_DOCS_ENABLED_TRUE$]) ++m4trace:configure.ac:312: -1- AC_SUBST([DOCBOOK_DOCS_ENABLED_FALSE]) ++m4trace:configure.ac:312: -1- AC_SUBST_TRACE([DOCBOOK_DOCS_ENABLED_FALSE]) ++m4trace:configure.ac:312: -1- m4_pattern_allow([^DOCBOOK_DOCS_ENABLED_FALSE$]) ++m4trace:configure.ac:328: -1- AC_SUBST([DBUS_SERVICES_DIR]) ++m4trace:configure.ac:328: -1- AC_SUBST_TRACE([DBUS_SERVICES_DIR]) ++m4trace:configure.ac:328: -1- m4_pattern_allow([^DBUS_SERVICES_DIR$]) ++m4trace:configure.ac:335: -1- AC_SUBST([LIBNOTIFY_CFLAGS]) ++m4trace:configure.ac:335: -1- AC_SUBST_TRACE([LIBNOTIFY_CFLAGS]) ++m4trace:configure.ac:335: -1- m4_pattern_allow([^LIBNOTIFY_CFLAGS$]) ++m4trace:configure.ac:335: -1- AC_SUBST([LIBNOTIFY_LIBS]) ++m4trace:configure.ac:335: -1- AC_SUBST_TRACE([LIBNOTIFY_LIBS]) ++m4trace:configure.ac:335: -1- m4_pattern_allow([^LIBNOTIFY_LIBS$]) ++m4trace:configure.ac:336: -1- AC_SUBST([LIBNOTIFY_CFLAGS]) ++m4trace:configure.ac:336: -1- AC_SUBST_TRACE([LIBNOTIFY_CFLAGS]) ++m4trace:configure.ac:336: -1- m4_pattern_allow([^LIBNOTIFY_CFLAGS$]) ++m4trace:configure.ac:337: -1- AC_SUBST([LIBNOTIFY_LIBS]) ++m4trace:configure.ac:337: -1- AC_SUBST_TRACE([LIBNOTIFY_LIBS]) ++m4trace:configure.ac:337: -1- m4_pattern_allow([^LIBNOTIFY_LIBS$]) ++m4trace:configure.ac:338: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBNOTIFY]) ++m4trace:configure.ac:338: -1- m4_pattern_allow([^HAVE_LIBNOTIFY$]) ++m4trace:configure.ac:338: -1- AH_OUTPUT([HAVE_LIBNOTIFY], [/* Building with libnotify support */ ++#undef HAVE_LIBNOTIFY]) ++m4trace:configure.ac:342: -1- AM_CONDITIONAL([HAVE_LIBNOTIFY], [test $have_libnotify = yes]) ++m4trace:configure.ac:342: -1- AC_SUBST([HAVE_LIBNOTIFY_TRUE]) ++m4trace:configure.ac:342: -1- AC_SUBST_TRACE([HAVE_LIBNOTIFY_TRUE]) ++m4trace:configure.ac:342: -1- m4_pattern_allow([^HAVE_LIBNOTIFY_TRUE$]) ++m4trace:configure.ac:342: -1- AC_SUBST([HAVE_LIBNOTIFY_FALSE]) ++m4trace:configure.ac:342: -1- AC_SUBST_TRACE([HAVE_LIBNOTIFY_FALSE]) ++m4trace:configure.ac:342: -1- m4_pattern_allow([^HAVE_LIBNOTIFY_FALSE$]) ++m4trace:configure.ac:349: -1- AC_SUBST([UNIQUE_CFLAGS]) ++m4trace:configure.ac:349: -1- AC_SUBST_TRACE([UNIQUE_CFLAGS]) ++m4trace:configure.ac:349: -1- m4_pattern_allow([^UNIQUE_CFLAGS$]) ++m4trace:configure.ac:349: -1- AC_SUBST([UNIQUE_LIBS]) ++m4trace:configure.ac:349: -1- AC_SUBST_TRACE([UNIQUE_LIBS]) ++m4trace:configure.ac:349: -1- m4_pattern_allow([^UNIQUE_LIBS$]) ++m4trace:configure.ac:350: -1- AC_SUBST([UNIQUE_CFLAGS]) ++m4trace:configure.ac:350: -1- AC_SUBST_TRACE([UNIQUE_CFLAGS]) ++m4trace:configure.ac:350: -1- m4_pattern_allow([^UNIQUE_CFLAGS$]) ++m4trace:configure.ac:351: -1- AC_SUBST([UNIQUE_LIBS]) ++m4trace:configure.ac:351: -1- AC_SUBST_TRACE([UNIQUE_LIBS]) ++m4trace:configure.ac:351: -1- m4_pattern_allow([^UNIQUE_LIBS$]) ++m4trace:configure.ac:352: -1- AC_DEFINE_TRACE_LITERAL([HAVE_UNIQUE]) ++m4trace:configure.ac:352: -1- m4_pattern_allow([^HAVE_UNIQUE$]) ++m4trace:configure.ac:352: -1- AH_OUTPUT([HAVE_UNIQUE], [/* Building with unique support */ ++#undef HAVE_UNIQUE]) ++m4trace:configure.ac:355: -1- AC_DEFINE_TRACE_LITERAL([HAVE_UNIQUE]) ++m4trace:configure.ac:355: -1- m4_pattern_allow([^HAVE_UNIQUE$]) ++m4trace:configure.ac:355: -1- AH_OUTPUT([HAVE_UNIQUE], [/* Not building with unique support */ ++#undef HAVE_UNIQUE]) ++m4trace:configure.ac:357: -1- AM_CONDITIONAL([HAVE_UNIQUE], [test $have_unique = yes]) ++m4trace:configure.ac:357: -1- AC_SUBST([HAVE_UNIQUE_TRUE]) ++m4trace:configure.ac:357: -1- AC_SUBST_TRACE([HAVE_UNIQUE_TRUE]) ++m4trace:configure.ac:357: -1- m4_pattern_allow([^HAVE_UNIQUE_TRUE$]) ++m4trace:configure.ac:357: -1- AC_SUBST([HAVE_UNIQUE_FALSE]) ++m4trace:configure.ac:357: -1- AC_SUBST_TRACE([HAVE_UNIQUE_FALSE]) ++m4trace:configure.ac:357: -1- m4_pattern_allow([^HAVE_UNIQUE_FALSE$]) ++m4trace:configure.ac:508: -1- AC_DEFINE_TRACE_LITERAL([HAVE_DPMS_EXTENSION]) ++m4trace:configure.ac:508: -1- m4_pattern_allow([^HAVE_DPMS_EXTENSION$]) ++m4trace:configure.ac:508: -1- AH_OUTPUT([HAVE_DPMS_EXTENSION], [/* Define if the DPMS extension is available */ ++#undef HAVE_DPMS_EXTENSION]) ++m4trace:configure.ac:521: -1- AC_DEFINE_TRACE_LITERAL([HAVE_KSTAT]) ++m4trace:configure.ac:521: -1- m4_pattern_allow([^HAVE_KSTAT$]) ++m4trace:configure.ac:521: -1- AH_OUTPUT([HAVE_KSTAT], [/* Define if Solaris kstat is support */ ++#undef HAVE_KSTAT]) ++m4trace:configure.ac:526: -1- AC_SUBST([GPM_EXTRA_LIBS]) ++m4trace:configure.ac:526: -1- AC_SUBST_TRACE([GPM_EXTRA_LIBS]) ++m4trace:configure.ac:526: -1- m4_pattern_allow([^GPM_EXTRA_LIBS$]) ++m4trace:configure.ac:531: -1- AC_SUBST([DOCBOOK2MAN]) ++m4trace:configure.ac:531: -1- AC_SUBST_TRACE([DOCBOOK2MAN]) ++m4trace:configure.ac:531: -1- m4_pattern_allow([^DOCBOOK2MAN$]) ++m4trace:configure.ac:535: -1- AM_CONDITIONAL([HAVE_DOCBOOK2MAN], [test "$DOCBOOK2MAN" != "no"]) ++m4trace:configure.ac:535: -1- AC_SUBST([HAVE_DOCBOOK2MAN_TRUE]) ++m4trace:configure.ac:535: -1- AC_SUBST_TRACE([HAVE_DOCBOOK2MAN_TRUE]) ++m4trace:configure.ac:535: -1- m4_pattern_allow([^HAVE_DOCBOOK2MAN_TRUE$]) ++m4trace:configure.ac:535: -1- AC_SUBST([HAVE_DOCBOOK2MAN_FALSE]) ++m4trace:configure.ac:535: -1- AC_SUBST_TRACE([HAVE_DOCBOOK2MAN_FALSE]) ++m4trace:configure.ac:535: -1- m4_pattern_allow([^HAVE_DOCBOOK2MAN_FALSE$]) ++m4trace:configure.ac:566: -1- _m4_warn([obsolete], [The macro `AC_TRY_COMPILE' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:2367: AC_TRY_COMPILE is expanded from... ++configure.ac:566: the top level]) ++m4trace:configure.ac:584: -1- AC_CONFIG_FILES([ ++Makefile ++src/Makefile ++src/dbus/Makefile ++applets/Makefile ++applets/brightness/Makefile ++applets/inhibit/Makefile ++libhal-glib/Makefile ++libdbus-glib/Makefile ++libidletime/Makefile ++libunique/Makefile ++docs/Makefile ++man/Makefile ++help/Makefile ++po/Makefile.in ++tools/Makefile ++test/Makefile ++data/Makefile ++data/gnome-power-manager.desktop.in ++data/gnome-power-preferences.desktop.in ++data/gnome-power-statistics.desktop.in ++data/sounds/Makefile ++data/icons/Makefile ++data/icons/16x16/Makefile ++data/icons/16x16/actions/Makefile ++data/icons/16x16/apps/Makefile ++data/icons/16x16/status/Makefile ++data/icons/22x22/Makefile ++data/icons/22x22/actions/Makefile ++data/icons/22x22/apps/Makefile ++data/icons/22x22/status/Makefile ++data/icons/24x24/Makefile ++data/icons/24x24/actions/Makefile ++data/icons/24x24/apps/Makefile ++data/icons/24x24/status/Makefile ++data/icons/48x48/Makefile ++data/icons/48x48/actions/Makefile ++data/icons/48x48/apps/Makefile ++data/icons/48x48/status/Makefile ++data/icons/scalable/Makefile ++data/icons/scalable/actions/Makefile ++data/icons/scalable/apps/Makefile ++data/icons/scalable/status/Makefile ++]) ++m4trace:configure.ac:629: -1- AC_SUBST([LIB@&t@OBJS], [$ac_libobjs]) ++m4trace:configure.ac:629: -1- AC_SUBST_TRACE([LIB@&t@OBJS]) ++m4trace:configure.ac:629: -1- m4_pattern_allow([^LIB@&t@OBJS$]) ++m4trace:configure.ac:629: -1- AC_SUBST([LTLIBOBJS], [$ac_ltlibobjs]) ++m4trace:configure.ac:629: -1- AC_SUBST_TRACE([LTLIBOBJS]) ++m4trace:configure.ac:629: -1- m4_pattern_allow([^LTLIBOBJS$]) ++m4trace:configure.ac:629: -1- AC_SUBST_TRACE([top_builddir]) ++m4trace:configure.ac:629: -1- AC_SUBST_TRACE([srcdir]) ++m4trace:configure.ac:629: -1- AC_SUBST_TRACE([abs_srcdir]) ++m4trace:configure.ac:629: -1- AC_SUBST_TRACE([top_srcdir]) ++m4trace:configure.ac:629: -1- AC_SUBST_TRACE([abs_top_srcdir]) ++m4trace:configure.ac:629: -1- AC_SUBST_TRACE([builddir]) ++m4trace:configure.ac:629: -1- AC_SUBST_TRACE([abs_builddir]) ++m4trace:configure.ac:629: -1- AC_SUBST_TRACE([abs_top_builddir]) ++m4trace:configure.ac:629: -1- AC_SUBST_TRACE([INSTALL]) ++m4trace:configure.ac:629: -1- AC_REQUIRE_AUX_FILE([ltmain.sh]) +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/autom4te.cache/traces.2 gnome-power-manager-2.24.0.new/autom4te.cache/traces.2 +--- gnome-power-manager-2.24.0/autom4te.cache/traces.2 1970-01-01 01:00:00.000000000 +0100 ++++ gnome-power-manager-2.24.0.new/autom4te.cache/traces.2 2008-11-20 18:37:20.000000000 +0100 +@@ -0,0 +1,3246 @@ ++m4trace:/usr/share/aclocal/argz.m4:12: -1- AC_DEFUN([gl_FUNC_ARGZ], [gl_PREREQ_ARGZ ++ ++AC_CHECK_HEADERS([argz.h], [], [], [AC_INCLUDES_DEFAULT]) ++ ++AC_CHECK_TYPES([error_t], ++ [], ++ [AC_DEFINE([error_t], [int], ++ [Define to a type to use for `error_t' if it is not otherwise available.]) ++ AC_DEFINE([__error_t_defined], [1], [Define so that glibc/gnulib argp.h ++ does not typedef error_t.])], ++ [#if defined(HAVE_ARGZ_H) ++# include ++#endif]) ++ ++ARGZ_H= ++AC_CHECK_FUNCS([argz_add argz_append argz_count argz_create_sep argz_insert \ ++ argz_next argz_stringify], [], [ARGZ_H=argz.h; AC_LIBOBJ([argz])]) ++ ++dnl if have system argz functions, allow forced use of ++dnl libltdl-supplied implementation (and default to do so ++dnl on "known bad" systems). Could use a runtime check, but ++dnl (a) detecting malloc issues is notoriously unreliable ++dnl (b) only known system that declares argz functions, ++dnl provides them, yet they are broken, is cygwin ++dnl releases prior to 16-Mar-2007 (1.5.24 and earlier) ++dnl So, it's more straightforward simply to special case ++dnl this for known bad systems. ++AS_IF([test -z "$ARGZ_H"], ++ [AC_CACHE_CHECK( ++ [if argz actually works], ++ [lt_cv_sys_argz_works], ++ [[case $host_os in #( ++ *cygwin*) ++ lt_cv_sys_argz_works=no ++ if test "$cross_compiling" != no; then ++ lt_cv_sys_argz_works="guessing no" ++ else ++ lt_sed_extract_leading_digits='s/^\([0-9\.]*\).*/\1/' ++ save_IFS=$IFS ++ IFS=-. ++ set x `uname -r | sed -e "$lt_sed_extract_leading_digits"` ++ IFS=$save_IFS ++ lt_os_major=${2-0} ++ lt_os_minor=${3-0} ++ lt_os_micro=${4-0} ++ if test "$lt_os_major" -gt 1 \ ++ || { test "$lt_os_major" -eq 1 \ ++ && { test "$lt_os_minor" -gt 5 \ ++ || { test "$lt_os_minor" -eq 5 \ ++ && test "$lt_os_micro" -gt 24; }; }; }; then ++ lt_cv_sys_argz_works=yes ++ fi ++ fi ++ ;; #( ++ *) lt_cv_sys_argz_works=yes ;; ++ esac]]) ++ AS_IF([test $lt_cv_sys_argz_works = yes], ++ [AC_DEFINE([HAVE_WORKING_ARGZ], 1, ++ [This value is set to 1 to indicate that the system argz facility works])], ++ [ARGZ_H=argz.h ++ AC_LIBOBJ([argz])])]) ++ ++AC_SUBST([ARGZ_H]) ++]) ++m4trace:/usr/share/aclocal/argz.m4:79: -1- AC_DEFUN([gl_PREREQ_ARGZ], [:]) ++m4trace:/usr/share/aclocal/gconf-2.m4:8: -1- AC_DEFUN([AM_GCONF_SOURCE_2], [ ++ if test "x$GCONF_SCHEMA_INSTALL_SOURCE" = "x"; then ++ GCONF_SCHEMA_CONFIG_SOURCE=`gconftool-2 --get-default-source` ++ else ++ GCONF_SCHEMA_CONFIG_SOURCE=$GCONF_SCHEMA_INSTALL_SOURCE ++ fi ++ ++ AC_ARG_WITH([gconf-source], ++ AC_HELP_STRING([--with-gconf-source=sourceaddress], ++ [Config database for installing schema files.]), ++ [GCONF_SCHEMA_CONFIG_SOURCE="$withval"],) ++ ++ AC_SUBST(GCONF_SCHEMA_CONFIG_SOURCE) ++ AC_MSG_RESULT([Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation]) ++ ++ if test "x$GCONF_SCHEMA_FILE_DIR" = "x"; then ++ GCONF_SCHEMA_FILE_DIR='$(sysconfdir)/gconf/schemas' ++ fi ++ ++ AC_ARG_WITH([gconf-schema-file-dir], ++ AC_HELP_STRING([--with-gconf-schema-file-dir=dir], ++ [Directory for installing schema files.]), ++ [GCONF_SCHEMA_FILE_DIR="$withval"],) ++ ++ AC_SUBST(GCONF_SCHEMA_FILE_DIR) ++ AC_MSG_RESULT([Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files]) ++ ++ AC_ARG_ENABLE(schemas-install, ++ [ --disable-schemas-install Disable the schemas installation], ++ [case ${enableval} in ++ yes|no) ;; ++ *) AC_MSG_ERROR(bad value ${enableval} for --enable-schemas-install) ;; ++ esac]) ++ AM_CONDITIONAL([GCONF_SCHEMAS_INSTALL], [test "$enable_schemas_install" != no]) ++]) ++m4trace:/usr/share/aclocal/glib-gettext.m4:412: -1- AC_DEFUN([AM_GLIB_GNU_GETTEXT], [GLIB_GNU_GETTEXT($@)]) ++m4trace:/usr/share/aclocal/glib-gettext.m4:412: -1- AC_DEFUN([AM_GLIB_DEFINE_LOCALEDIR], [GLIB_DEFINE_LOCALEDIR($@)]) ++m4trace:/usr/share/aclocal/glib-gettext.m4:422: -1- AC_DEFUN([GLIB_RUN_PROG], [cat >conftest.foo <<_ACEOF ++$2 ++_ACEOF ++if AC_RUN_LOG([$1 conftest.foo]); then ++ m4_ifval([$3], [$3], [:]) ++m4_ifvaln([$4], [else $4])dnl ++echo "$as_me: failed input was:" >&AS_MESSAGE_LOG_FD ++sed 's/^/| /' conftest.foo >&AS_MESSAGE_LOG_FD ++fi]) ++m4trace:/usr/share/aclocal/gnome-compiler-flags.m4:4: -1- AC_DEFUN([GNOME_COMPILE_WARNINGS], [ ++ dnl ****************************** ++ dnl More compiler warnings ++ dnl ****************************** ++ ++ AC_ARG_ENABLE(compile-warnings, ++ AC_HELP_STRING([--enable-compile-warnings=@<:@no/minimum/yes/maximum/error@:>@], ++ [Turn on compiler warnings]),, ++ [enable_compile_warnings="m4_default([$1],[yes])"]) ++ ++ warnCFLAGS= ++ if test "x$GCC" != xyes; then ++ enable_compile_warnings=no ++ fi ++ ++ warning_flags= ++ realsave_CFLAGS="$CFLAGS" ++ ++ case "$enable_compile_warnings" in ++ no) ++ warning_flags= ++ ;; ++ minimum) ++ warning_flags="-Wall" ++ ;; ++ yes) ++ warning_flags="-Wall -Wmissing-prototypes" ++ ;; ++ maximum|error) ++ warning_flags="-Wall -Wmissing-prototypes -Wnested-externs -Wpointer-arith" ++ CFLAGS="$warning_flags $CFLAGS" ++ for option in -Wno-sign-compare; do ++ SAVE_CFLAGS="$CFLAGS" ++ CFLAGS="$CFLAGS $option" ++ AC_MSG_CHECKING([whether gcc understands $option]) ++ AC_TRY_COMPILE([], [], ++ has_option=yes, ++ has_option=no,) ++ CFLAGS="$SAVE_CFLAGS" ++ AC_MSG_RESULT($has_option) ++ if test $has_option = yes; then ++ warning_flags="$warning_flags $option" ++ fi ++ unset has_option ++ unset SAVE_CFLAGS ++ done ++ unset option ++ if test "$enable_compile_warnings" = "error" ; then ++ warning_flags="$warning_flags -Werror" ++ fi ++ ;; ++ *) ++ AC_MSG_ERROR(Unknown argument '$enable_compile_warnings' to --enable-compile-warnings) ++ ;; ++ esac ++ CFLAGS="$realsave_CFLAGS" ++ AC_MSG_CHECKING(what warning flags to pass to the C compiler) ++ AC_MSG_RESULT($warning_flags) ++ ++ AC_ARG_ENABLE(iso-c, ++ AC_HELP_STRING([--enable-iso-c], ++ [Try to warn if code is not ISO C ]),, ++ [enable_iso_c=no]) ++ ++ AC_MSG_CHECKING(what language compliance flags to pass to the C compiler) ++ complCFLAGS= ++ if test "x$enable_iso_c" != "xno"; then ++ if test "x$GCC" = "xyes"; then ++ case " $CFLAGS " in ++ *[\ \ ]-ansi[\ \ ]*) ;; ++ *) complCFLAGS="$complCFLAGS -ansi" ;; ++ esac ++ case " $CFLAGS " in ++ *[\ \ ]-pedantic[\ \ ]*) ;; ++ *) complCFLAGS="$complCFLAGS -pedantic" ;; ++ esac ++ fi ++ fi ++ AC_MSG_RESULT($complCFLAGS) ++ ++ WARN_CFLAGS="$warning_flags $complCFLAGS" ++ AC_SUBST(WARN_CFLAGS) ++]) ++m4trace:/usr/share/aclocal/gnome-compiler-flags.m4:90: -1- AC_DEFUN([GNOME_CXX_WARNINGS], [ ++ AC_ARG_ENABLE(cxx-warnings, ++ AC_HELP_STRING([--enable-cxx-warnings=@<:@no/minimum/yes@:>@] ++ [Turn on compiler warnings.]),, ++ [enable_cxx_warnings="m4_default([$1],[minimum])"]) ++ ++ AC_MSG_CHECKING(what warning flags to pass to the C++ compiler) ++ warnCXXFLAGS= ++ if test "x$GXX" != xyes; then ++ enable_cxx_warnings=no ++ fi ++ if test "x$enable_cxx_warnings" != "xno"; then ++ if test "x$GXX" = "xyes"; then ++ case " $CXXFLAGS " in ++ *[\ \ ]-Wall[\ \ ]*) ;; ++ *) warnCXXFLAGS="-Wall -Wno-unused" ;; ++ esac ++ ++ ## -W is not all that useful. And it cannot be controlled ++ ## with individual -Wno-xxx flags, unlike -Wall ++ if test "x$enable_cxx_warnings" = "xyes"; then ++ warnCXXFLAGS="$warnCXXFLAGS -Wshadow -Woverloaded-virtual" ++ fi ++ fi ++ fi ++ AC_MSG_RESULT($warnCXXFLAGS) ++ ++ AC_ARG_ENABLE(iso-cxx, ++ AC_HELP_STRING([--enable-iso-cxx], ++ [Try to warn if code is not ISO C++ ]),, ++ [enable_iso_cxx=no]) ++ ++ AC_MSG_CHECKING(what language compliance flags to pass to the C++ compiler) ++ complCXXFLAGS= ++ if test "x$enable_iso_cxx" != "xno"; then ++ if test "x$GXX" = "xyes"; then ++ case " $CXXFLAGS " in ++ *[\ \ ]-ansi[\ \ ]*) ;; ++ *) complCXXFLAGS="$complCXXFLAGS -ansi" ;; ++ esac ++ ++ case " $CXXFLAGS " in ++ *[\ \ ]-pedantic[\ \ ]*) ;; ++ *) complCXXFLAGS="$complCXXFLAGS -pedantic" ;; ++ esac ++ fi ++ fi ++ AC_MSG_RESULT($complCXXFLAGS) ++ ++ WARN_CXXFLAGS="$CXXFLAGS $warnCXXFLAGS $complCXXFLAGS" ++ AC_SUBST(WARN_CXXFLAGS) ++]) ++m4trace:/usr/share/aclocal/ltdl.m4:16: -1- AC_DEFUN([LT_CONFIG_LTDL_DIR], [AC_BEFORE([$0], [LTDL_INIT]) ++_$0($*) ++]) ++m4trace:/usr/share/aclocal/ltdl.m4:68: -1- AC_DEFUN([LTDL_CONVENIENCE], [AC_BEFORE([$0], [LTDL_INIT])dnl ++dnl Although the argument is deprecated and no longer documented, ++dnl LTDL_CONVENIENCE used to take a DIRECTORY orgument, if we have one ++dnl here make sure it is the same as any other declaration of libltdl's ++dnl location! This also ensures lt_ltdl_dir is set when configure.ac is ++dnl not yet using an explicit LT_CONFIG_LTDL_DIR. ++m4_ifval([$1], [_LT_CONFIG_LTDL_DIR([$1])])dnl ++_$0() ++]) ++m4trace:/usr/share/aclocal/ltdl.m4:81: -1- AU_DEFUN([AC_LIBLTDL_CONVENIENCE], [_LT_CONFIG_LTDL_DIR([m4_default([$1], [libltdl])]) ++_LTDL_CONVENIENCE]) ++m4trace:/usr/share/aclocal/ltdl.m4:81: -1- AC_DEFUN([AC_LIBLTDL_CONVENIENCE], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBLTDL_CONVENIENCE' is obsolete. ++You should run autoupdate.])dnl ++_LT_CONFIG_LTDL_DIR([m4_default([$1], [libltdl])]) ++_LTDL_CONVENIENCE]) ++m4trace:/usr/share/aclocal/ltdl.m4:124: -1- AC_DEFUN([LTDL_INSTALLABLE], [AC_BEFORE([$0], [LTDL_INIT])dnl ++dnl Although the argument is deprecated and no longer documented, ++dnl LTDL_INSTALLABLE used to take a DIRECTORY orgument, if we have one ++dnl here make sure it is the same as any other declaration of libltdl's ++dnl location! This also ensures lt_ltdl_dir is set when configure.ac is ++dnl not yet using an explicit LT_CONFIG_LTDL_DIR. ++m4_ifval([$1], [_LT_CONFIG_LTDL_DIR([$1])])dnl ++_$0() ++]) ++m4trace:/usr/share/aclocal/ltdl.m4:137: -1- AU_DEFUN([AC_LIBLTDL_INSTALLABLE], [_LT_CONFIG_LTDL_DIR([m4_default([$1], [libltdl])]) ++_LTDL_INSTALLABLE]) ++m4trace:/usr/share/aclocal/ltdl.m4:137: -1- AC_DEFUN([AC_LIBLTDL_INSTALLABLE], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBLTDL_INSTALLABLE' is obsolete. ++You should run autoupdate.])dnl ++_LT_CONFIG_LTDL_DIR([m4_default([$1], [libltdl])]) ++_LTDL_INSTALLABLE]) ++m4trace:/usr/share/aclocal/ltdl.m4:213: -1- AC_DEFUN([_LT_LIBOBJ], [ ++ m4_pattern_allow([^_LT_LIBOBJS$]) ++ AS_LITERAL_IF([$1], [_LT_LIBSOURCES([$1.c])])dnl ++ _LT_LIBOBJS="$_LT_LIBOBJS $1.$ac_objext" ++]) ++m4trace:/usr/share/aclocal/ltdl.m4:224: -1- AC_DEFUN([_LT_LIBSOURCES], [ ++ m4_foreach([_LTNAME], [$1], [ ++ m4_syscmd([test -r "$lt_libobj_prefix]_LTNAME[" || ++ test -z "$lt_libobj_prefix" || ++ test ! -d "$lt_libobj_prefix"])dnl ++ m4_if(m4_sysval, [0], [], ++ [AC_FATAL([missing $lt_libobj_prefix/]_LTNAME)]) ++ ]) ++]) ++m4trace:/usr/share/aclocal/ltdl.m4:242: -1- AC_DEFUN([LTDL_INIT], [dnl Parse OPTIONS ++_LT_SET_OPTIONS([$0], [$1]) ++ ++dnl We need to keep our own list of libobjs separate from our parent project, ++dnl and the easiest way to do that is redefine the AC_LIBOBJs macro while ++dnl we look for our own LIBOBJs. Definitions in ltdl-libobj.m4. ++m4_pushdef([AC_LIBOBJ], m4_defn([_LT_LIBOBJ])) ++m4_pushdef([AC_LIBSOURCES], m4_defn([_LT_LIBSOURCES])) ++ ++dnl If not otherwise defined, default to the 1.5.x compatible subproject mode: ++m4_if(_LTDL_MODE, [], ++ [m4_define([_LTDL_MODE], m4_default([$2], [subproject])) ++ m4_if([-1], [m4_bregexp(_LTDL_MODE, [\(subproject\|\(non\)?recursive\)])], ++ [m4_fatal([unknown libltdl mode: ]_LTDL_MODE)])]) ++ ++AC_ARG_WITH([included_ltdl], ++ [AS_HELP_STRING([--with-included-ltdl], ++ [use the GNU ltdl sources included here])]) ++ ++if test "x$with_included_ltdl" != xyes; then ++ # We are not being forced to use the included libltdl sources, so ++ # decide whether there is a useful installed version we can use. ++ AC_CHECK_HEADER([ltdl.h], ++ [AC_CHECK_DECL([lt_dlinterface_register], ++ [AC_CHECK_LIB([ltdl], [lt_dlinterface_register], ++ [with_included_ltdl=no], ++ [with_included_ltdl=yes])], ++ [with_included_ltdl=yes], ++ [AC_INCLUDES_DEFAULT ++ #include ])], ++ [with_included_ltdl=yes], ++ [AC_INCLUDES_DEFAULT] ++ ) ++fi ++ ++dnl If neither LT_CONFIG_LTDL_DIR, LTDL_CONVENIENCE nor LTDL_INSTALLABLE ++dnl was called yet, then for old times' sake, we assume libltdl is in an ++dnl eponymous directory: ++AC_PROVIDE_IFELSE([LT_CONFIG_LTDL_DIR], [], [_LT_CONFIG_LTDL_DIR([libltdl])]) ++ ++AC_ARG_WITH([ltdl_include], ++ [AS_HELP_STRING([--with-ltdl-include=DIR], ++ [use the ltdl headers installed in DIR])]) ++ ++if test -n "$with_ltdl_include"; then ++ if test -f "$with_ltdl_include/ltdl.h"; then : ++ else ++ AC_MSG_ERROR([invalid ltdl include directory: `$with_ltdl_include']) ++ fi ++else ++ with_ltdl_include=no ++fi ++ ++AC_ARG_WITH([ltdl_lib], ++ [AS_HELP_STRING([--with-ltdl-lib=DIR], ++ [use the libltdl.la installed in DIR])]) ++ ++if test -n "$with_ltdl_lib"; then ++ if test -f "$with_ltdl_lib/libltdl.la"; then : ++ else ++ AC_MSG_ERROR([invalid ltdl library directory: `$with_ltdl_lib']) ++ fi ++else ++ with_ltdl_lib=no ++fi ++ ++case ,$with_included_ltdl,$with_ltdl_include,$with_ltdl_lib, in ++ ,yes,no,no,) ++ m4_case(m4_default(_LTDL_TYPE, [convenience]), ++ [convenience], [_LTDL_CONVENIENCE], ++ [installable], [_LTDL_INSTALLABLE], ++ [m4_fatal([unknown libltdl build type: ]_LTDL_TYPE)]) ++ ;; ++ ,no,no,no,) ++ # If the included ltdl is not to be used, then use the ++ # preinstalled libltdl we found. ++ AC_DEFINE([HAVE_LTDL], [1], ++ [Define this if a modern libltdl is already installed]) ++ LIBLTDL=-lltdl ++ LTDLDEPS= ++ LTDLINCL= ++ ;; ++ ,no*,no,*) ++ AC_MSG_ERROR([`--with-ltdl-include' and `--with-ltdl-lib' options must be used together]) ++ ;; ++ *) with_included_ltdl=no ++ LIBLTDL="-L$with_ltdl_lib -lltdl" ++ LTDLDEPS= ++ LTDLINCL="-I$with_ltdl_include" ++ ;; ++esac ++INCLTDL="$LTDLINCL" ++ ++# Report our decision... ++AC_MSG_CHECKING([where to find libltdl headers]) ++AC_MSG_RESULT([$LTDLINCL]) ++AC_MSG_CHECKING([where to find libltdl library]) ++AC_MSG_RESULT([$LIBLTDL]) ++ ++_LTDL_SETUP ++ ++dnl restore autoconf definition. ++m4_popdef([AC_LIBOBJ]) ++m4_popdef([AC_LIBSOURCES]) ++ ++AC_CONFIG_COMMANDS_PRE([ ++ _ltdl_libobjs= ++ _ltdl_ltlibobjs= ++ if test -n "$_LT_LIBOBJS"; then ++ # Remove the extension. ++ _lt_sed_drop_objext='s/\.o$//;s/\.obj$//' ++ for i in `for i in $_LT_LIBOBJS; do echo "$i"; done | sed "$_lt_sed_drop_objext" | sort -u`; do ++ _ltdl_libobjs="$_ltdl_libobjs $lt_libobj_prefix$i.$ac_objext" ++ _ltdl_ltlibobjs="$_ltdl_ltlibobjs $lt_libobj_prefix$i.lo" ++ done ++ fi ++ AC_SUBST([ltdl_LIBOBJS], [$_ltdl_libobjs]) ++ AC_SUBST([ltdl_LTLIBOBJS], [$_ltdl_ltlibobjs]) ++]) ++ ++# Only expand once: ++m4_define([LTDL_INIT]) ++]) ++m4trace:/usr/share/aclocal/ltdl.m4:368: -1- AU_DEFUN([AC_LIB_LTDL], [LTDL_INIT($@)]) ++m4trace:/usr/share/aclocal/ltdl.m4:368: -1- AC_DEFUN([AC_LIB_LTDL], [AC_DIAGNOSE([obsolete], [The macro `AC_LIB_LTDL' is obsolete. ++You should run autoupdate.])dnl ++LTDL_INIT($@)]) ++m4trace:/usr/share/aclocal/ltdl.m4:369: -1- AU_DEFUN([AC_WITH_LTDL], [LTDL_INIT($@)]) ++m4trace:/usr/share/aclocal/ltdl.m4:369: -1- AC_DEFUN([AC_WITH_LTDL], [AC_DIAGNOSE([obsolete], [The macro `AC_WITH_LTDL' is obsolete. ++You should run autoupdate.])dnl ++LTDL_INIT($@)]) ++m4trace:/usr/share/aclocal/ltdl.m4:370: -1- AU_DEFUN([LT_WITH_LTDL], [LTDL_INIT($@)]) ++m4trace:/usr/share/aclocal/ltdl.m4:370: -1- AC_DEFUN([LT_WITH_LTDL], [AC_DIAGNOSE([obsolete], [The macro `LT_WITH_LTDL' is obsolete. ++You should run autoupdate.])dnl ++LTDL_INIT($@)]) ++m4trace:/usr/share/aclocal/ltdl.m4:383: -1- AC_DEFUN([_LTDL_SETUP], [AC_REQUIRE([AC_PROG_CC])dnl ++AC_REQUIRE([LT_SYS_MODULE_EXT])dnl ++AC_REQUIRE([LT_SYS_MODULE_PATH])dnl ++AC_REQUIRE([LT_SYS_DLSEARCH_PATH])dnl ++AC_REQUIRE([LT_LIB_DLLOAD])dnl ++AC_REQUIRE([LT_SYS_SYMBOL_USCORE])dnl ++AC_REQUIRE([LT_FUNC_DLSYM_USCORE])dnl ++AC_REQUIRE([LT_SYS_DLOPEN_DEPLIBS])dnl ++AC_REQUIRE([gl_FUNC_ARGZ])dnl ++ ++m4_require([_LT_CHECK_OBJDIR])dnl ++m4_require([_LT_HEADER_DLFCN])dnl ++m4_require([_LT_CHECK_DLPREOPEN])dnl ++m4_require([_LT_DECL_SED])dnl ++ ++# lt_cv_dlopen_self gets defined by LT_SYS_DLOPEN_SELF, called by LT_INIT ++if test "$lt_cv_dlopen_self" = yes; then ++ AC_DEFINE([LTDL_DLOPEN_SELF_WORKS], [1], ++ [Define if dlopen(NULL) is able to resolve symbols from the main program.]) ++fi ++ ++dnl Don't require this, or it will be expanded earlier than the code ++dnl that sets the variables it relies on: ++_LT_ENABLE_INSTALL ++ ++dnl _LTDL_MODE specific code must be called at least once: ++_LTDL_MODE_DISPATCH ++ ++# In order that ltdl.c can compile, find out the first AC_CONFIG_HEADERS ++# the user used. This is so that ltdl.h can pick up the parent projects ++# config.h file, The first file in AC_CONFIG_HEADERS must contain the ++# definitions required by ltdl.c. ++# FIXME: Remove use of undocumented AC_LIST_HEADERS (2.59 compatibility). ++AC_CONFIG_COMMANDS_PRE([dnl ++m4_pattern_allow([^LT_CONFIG_H$])dnl ++m4_ifset([AH_HEADER], ++ [LT_CONFIG_H=AH_HEADER], ++ [m4_ifset([AC_LIST_HEADERS], ++ [LT_CONFIG_H=`echo "AC_LIST_HEADERS" | $SED 's,^[[ ]]*,,;s,[[ :]].*$,,'`], ++ [])])]) ++AC_SUBST([LT_CONFIG_H]) ++ ++AC_CHECK_HEADERS([unistd.h dl.h sys/dl.h dld.h mach-o/dyld.h dirent.h], ++ [], [], [AC_INCLUDES_DEFAULT]) ++ ++AC_CHECK_FUNCS([closedir opendir readdir], [], [AC_LIBOBJ([lt__dirent])]) ++AC_CHECK_FUNCS([strlcat strlcpy], [], [AC_LIBOBJ([lt__strl])]) ++ ++name=ltdl ++LTDLOPEN=`eval "\\$ECHO \"$libname_spec\""` ++AC_SUBST([LTDLOPEN]) ++]) ++m4trace:/usr/share/aclocal/ltdl.m4:457: -1- AC_DEFUN([LT_SYS_DLOPEN_DEPLIBS], [AC_REQUIRE([AC_CANONICAL_HOST])dnl ++AC_CACHE_CHECK([whether deplibs are loaded by dlopen], ++ [lt_cv_sys_dlopen_deplibs], ++ [# PORTME does your system automatically load deplibs for dlopen? ++ # or its logical equivalent (e.g. shl_load for HP-UX < 11) ++ # For now, we just catch OSes we know something about -- in the ++ # future, we'll try test this programmatically. ++ lt_cv_sys_dlopen_deplibs=unknown ++ case $host_os in ++ aix3*|aix4.1.*|aix4.2.*) ++ # Unknown whether this is true for these versions of AIX, but ++ # we want this `case' here to explicitly catch those versions. ++ lt_cv_sys_dlopen_deplibs=unknown ++ ;; ++ aix[[4-9]]*) ++ lt_cv_sys_dlopen_deplibs=yes ++ ;; ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ lt_cv_sys_dlopen_deplibs=no ++ ;; ++ esac ++ ;; ++ darwin*) ++ # Assuming the user has installed a libdl from somewhere, this is true ++ # If you are looking for one http://www.opendarwin.org/projects/dlcompat ++ lt_cv_sys_dlopen_deplibs=yes ++ ;; ++ freebsd* | dragonfly*) ++ lt_cv_sys_dlopen_deplibs=yes ++ ;; ++ gnu* | linux* | k*bsd*-gnu) ++ # GNU and its variants, using gnu ld.so (Glibc) ++ lt_cv_sys_dlopen_deplibs=yes ++ ;; ++ hpux10*|hpux11*) ++ lt_cv_sys_dlopen_deplibs=yes ++ ;; ++ interix*) ++ lt_cv_sys_dlopen_deplibs=yes ++ ;; ++ irix[[12345]]*|irix6.[[01]]*) ++ # Catch all versions of IRIX before 6.2, and indicate that we don't ++ # know how it worked for any of those versions. ++ lt_cv_sys_dlopen_deplibs=unknown ++ ;; ++ irix*) ++ # The case above catches anything before 6.2, and it's known that ++ # at 6.2 and later dlopen does load deplibs. ++ lt_cv_sys_dlopen_deplibs=yes ++ ;; ++ netbsd* | netbsdelf*-gnu) ++ lt_cv_sys_dlopen_deplibs=yes ++ ;; ++ openbsd*) ++ lt_cv_sys_dlopen_deplibs=yes ++ ;; ++ osf[[1234]]*) ++ # dlopen did load deplibs (at least at 4.x), but until the 5.x series, ++ # it did *not* use an RPATH in a shared library to find objects the ++ # library depends on, so we explicitly say `no'. ++ lt_cv_sys_dlopen_deplibs=no ++ ;; ++ osf5.0|osf5.0a|osf5.1) ++ # dlopen *does* load deplibs and with the right loader patch applied ++ # it even uses RPATH in a shared library to search for shared objects ++ # that the library depends on, but there's no easy way to know if that ++ # patch is installed. Since this is the case, all we can really ++ # say is unknown -- it depends on the patch being installed. If ++ # it is, this changes to `yes'. Without it, it would be `no'. ++ lt_cv_sys_dlopen_deplibs=unknown ++ ;; ++ osf*) ++ # the two cases above should catch all versions of osf <= 5.1. Read ++ # the comments above for what we know about them. ++ # At > 5.1, deplibs are loaded *and* any RPATH in a shared library ++ # is used to find them so we can finally say `yes'. ++ lt_cv_sys_dlopen_deplibs=yes ++ ;; ++ qnx*) ++ lt_cv_sys_dlopen_deplibs=yes ++ ;; ++ solaris*) ++ lt_cv_sys_dlopen_deplibs=yes ++ ;; ++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ libltdl_cv_sys_dlopen_deplibs=yes ++ ;; ++ esac ++ ]) ++if test "$lt_cv_sys_dlopen_deplibs" != yes; then ++ AC_DEFINE([LTDL_DLOPEN_DEPLIBS], [1], ++ [Define if the OS needs help to load dependent libraries for dlopen().]) ++fi ++]) ++m4trace:/usr/share/aclocal/ltdl.m4:556: -1- AU_DEFUN([AC_LTDL_SYS_DLOPEN_DEPLIBS], [m4_if($#, 0, [LT_SYS_DLOPEN_DEPLIBS], [LT_SYS_DLOPEN_DEPLIBS($@)])]) ++m4trace:/usr/share/aclocal/ltdl.m4:556: -1- AC_DEFUN([AC_LTDL_SYS_DLOPEN_DEPLIBS], [AC_DIAGNOSE([obsolete], [The macro `AC_LTDL_SYS_DLOPEN_DEPLIBS' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_SYS_DLOPEN_DEPLIBS], [LT_SYS_DLOPEN_DEPLIBS($@)])]) ++m4trace:/usr/share/aclocal/ltdl.m4:563: -1- AC_DEFUN([LT_SYS_MODULE_EXT], [m4_require([_LT_SYS_DYNAMIC_LINKER])dnl ++AC_CACHE_CHECK([which extension is used for runtime loadable modules], ++ [libltdl_cv_shlibext], ++[ ++module=yes ++eval libltdl_cv_shlibext=$shrext_cmds ++ ]) ++if test -n "$libltdl_cv_shlibext"; then ++ m4_pattern_allow([LT_MODULE_EXT])dnl ++ AC_DEFINE_UNQUOTED([LT_MODULE_EXT], ["$libltdl_cv_shlibext"], ++ [Define to the extension used for runtime loadable modules, say, ".so".]) ++fi ++]) ++m4trace:/usr/share/aclocal/ltdl.m4:579: -1- AU_DEFUN([AC_LTDL_SHLIBEXT], [m4_if($#, 0, [LT_SYS_MODULE_EXT], [LT_SYS_MODULE_EXT($@)])]) ++m4trace:/usr/share/aclocal/ltdl.m4:579: -1- AC_DEFUN([AC_LTDL_SHLIBEXT], [AC_DIAGNOSE([obsolete], [The macro `AC_LTDL_SHLIBEXT' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_SYS_MODULE_EXT], [LT_SYS_MODULE_EXT($@)])]) ++m4trace:/usr/share/aclocal/ltdl.m4:586: -1- AC_DEFUN([LT_SYS_MODULE_PATH], [m4_require([_LT_SYS_DYNAMIC_LINKER])dnl ++AC_CACHE_CHECK([which variable specifies run-time module search path], ++ [lt_cv_module_path_var], [lt_cv_module_path_var="$shlibpath_var"]) ++if test -n "$lt_cv_module_path_var"; then ++ m4_pattern_allow([LT_MODULE_PATH_VAR])dnl ++ AC_DEFINE_UNQUOTED([LT_MODULE_PATH_VAR], ["$lt_cv_module_path_var"], ++ [Define to the name of the environment variable that determines the run-time module search path.]) ++fi ++]) ++m4trace:/usr/share/aclocal/ltdl.m4:598: -1- AU_DEFUN([AC_LTDL_SHLIBPATH], [m4_if($#, 0, [LT_SYS_MODULE_PATH], [LT_SYS_MODULE_PATH($@)])]) ++m4trace:/usr/share/aclocal/ltdl.m4:598: -1- AC_DEFUN([AC_LTDL_SHLIBPATH], [AC_DIAGNOSE([obsolete], [The macro `AC_LTDL_SHLIBPATH' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_SYS_MODULE_PATH], [LT_SYS_MODULE_PATH($@)])]) ++m4trace:/usr/share/aclocal/ltdl.m4:605: -1- AC_DEFUN([LT_SYS_DLSEARCH_PATH], [m4_require([_LT_SYS_DYNAMIC_LINKER])dnl ++AC_CACHE_CHECK([for the default library search path], ++ [lt_cv_sys_dlsearch_path], ++ [lt_cv_sys_dlsearch_path="$sys_lib_dlsearch_path_spec"]) ++if test -n "$lt_cv_sys_dlsearch_path"; then ++ sys_dlsearch_path= ++ for dir in $lt_cv_sys_dlsearch_path; do ++ if test -z "$sys_dlsearch_path"; then ++ sys_dlsearch_path="$dir" ++ else ++ sys_dlsearch_path="$sys_dlsearch_path$PATH_SEPARATOR$dir" ++ fi ++ done ++ m4_pattern_allow([LT_DLSEARCH_PATH])dnl ++ AC_DEFINE_UNQUOTED([LT_DLSEARCH_PATH], ["$sys_dlsearch_path"], ++ [Define to the system default library search path.]) ++fi ++]) ++m4trace:/usr/share/aclocal/ltdl.m4:626: -1- AU_DEFUN([AC_LTDL_SYSSEARCHPATH], [m4_if($#, 0, [LT_SYS_DLSEARCH_PATH], [LT_SYS_DLSEARCH_PATH($@)])]) ++m4trace:/usr/share/aclocal/ltdl.m4:626: -1- AC_DEFUN([AC_LTDL_SYSSEARCHPATH], [AC_DIAGNOSE([obsolete], [The macro `AC_LTDL_SYSSEARCHPATH' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_SYS_DLSEARCH_PATH], [LT_SYS_DLSEARCH_PATH($@)])]) ++m4trace:/usr/share/aclocal/ltdl.m4:652: -1- AC_DEFUN([LT_LIB_DLLOAD], [m4_pattern_allow([^LT_DLLOADERS$]) ++LT_DLLOADERS= ++AC_SUBST([LT_DLLOADERS]) ++ ++AC_LANG_PUSH([C]) ++ ++LIBADD_DLOPEN= ++AC_SEARCH_LIBS([dlopen], [dl], ++ [AC_DEFINE([HAVE_LIBDL], [1], ++ [Define if you have the libdl library or equivalent.]) ++ if test "$ac_cv_search_dlopen" != "none required" ; then ++ LIBADD_DLOPEN="-ldl" ++ fi ++ libltdl_cv_lib_dl_dlopen="yes" ++ LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la"], ++ [AC_LINK_IFELSE([AC_LANG_PROGRAM([[#if HAVE_DLFCN_H ++# include ++#endif ++ ]], [[dlopen(0, 0);]])], ++ [AC_DEFINE([HAVE_LIBDL], [1], ++ [Define if you have the libdl library or equivalent.]) ++ libltdl_cv_func_dlopen="yes" ++ LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la"], ++ [AC_CHECK_LIB([svld], [dlopen], ++ [AC_DEFINE([HAVE_LIBDL], [1], ++ [Define if you have the libdl library or equivalent.]) ++ LIBADD_DLOPEN="-lsvld" libltdl_cv_func_dlopen="yes" ++ LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la"])])]) ++if test x"$libltdl_cv_func_dlopen" = xyes || test x"$libltdl_cv_lib_dl_dlopen" = xyes ++then ++ lt_save_LIBS="$LIBS" ++ LIBS="$LIBS $LIBADD_DLOPEN" ++ AC_CHECK_FUNCS([dlerror]) ++ LIBS="$lt_save_LIBS" ++fi ++AC_SUBST([LIBADD_DLOPEN]) ++ ++LIBADD_SHL_LOAD= ++AC_CHECK_FUNC([shl_load], ++ [AC_DEFINE([HAVE_SHL_LOAD], [1], ++ [Define if you have the shl_load function.]) ++ LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}shl_load.la"], ++ [AC_CHECK_LIB([dld], [shl_load], ++ [AC_DEFINE([HAVE_SHL_LOAD], [1], ++ [Define if you have the shl_load function.]) ++ LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}shl_load.la" ++ LIBADD_SHL_LOAD="-ldld"])]) ++AC_SUBST([LIBADD_SHL_LOAD]) ++ ++case $host_os in ++darwin[[1567]].*) ++# We only want this for pre-Mac OS X 10.4. ++ AC_CHECK_FUNC([_dyld_func_lookup], ++ [AC_DEFINE([HAVE_DYLD], [1], ++ [Define if you have the _dyld_func_lookup function.]) ++ LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dyld.la"]) ++ ;; ++beos*) ++ LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}load_add_on.la" ++ ;; ++cygwin* | mingw* | os2* | pw32*) ++ AC_CHECK_DECLS([cygwin_conv_path], [], [], [[#include ]]) ++ LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}loadlibrary.la" ++ ;; ++esac ++ ++AC_CHECK_LIB([dld], [dld_link], ++ [AC_DEFINE([HAVE_DLD], [1], ++ [Define if you have the GNU dld library.]) ++ LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dld_link.la"]) ++AC_SUBST([LIBADD_DLD_LINK]) ++ ++m4_pattern_allow([^LT_DLPREOPEN$]) ++LT_DLPREOPEN= ++if test -n "$LT_DLLOADERS" ++then ++ for lt_loader in $LT_DLLOADERS; do ++ LT_DLPREOPEN="$LT_DLPREOPEN-dlpreopen $lt_loader " ++ done ++ AC_DEFINE([HAVE_LIBDLLOADER], [1], ++ [Define if libdlloader will be built on this platform]) ++fi ++AC_SUBST([LT_DLPREOPEN]) ++ ++dnl This isn't used anymore, but set it for backwards compatibility ++LIBADD_DL="$LIBADD_DLOPEN $LIBADD_SHL_LOAD" ++AC_SUBST([LIBADD_DL]) ++ ++AC_LANG_POP ++]) ++m4trace:/usr/share/aclocal/ltdl.m4:745: -1- AU_DEFUN([AC_LTDL_DLLIB], [m4_if($#, 0, [LT_LIB_DLLOAD], [LT_LIB_DLLOAD($@)])]) ++m4trace:/usr/share/aclocal/ltdl.m4:745: -1- AC_DEFUN([AC_LTDL_DLLIB], [AC_DIAGNOSE([obsolete], [The macro `AC_LTDL_DLLIB' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_LIB_DLLOAD], [LT_LIB_DLLOAD($@)])]) ++m4trace:/usr/share/aclocal/ltdl.m4:753: -1- AC_DEFUN([LT_SYS_SYMBOL_USCORE], [m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl ++AC_CACHE_CHECK([for _ prefix in compiled symbols], ++ [lt_cv_sys_symbol_underscore], ++ [lt_cv_sys_symbol_underscore=no ++ cat > conftest.$ac_ext <<_LT_EOF ++void nm_test_func(){} ++int main(){nm_test_func;return 0;} ++_LT_EOF ++ if AC_TRY_EVAL(ac_compile); then ++ # Now try to grab the symbols. ++ ac_nlist=conftest.nm ++ if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then ++ # See whether the symbols have a leading underscore. ++ if grep '^. _nm_test_func' "$ac_nlist" >/dev/null; then ++ lt_cv_sys_symbol_underscore=yes ++ else ++ if grep '^. nm_test_func ' "$ac_nlist" >/dev/null; then ++ : ++ else ++ echo "configure: cannot find nm_test_func in $ac_nlist" >&AS_MESSAGE_LOG_FD ++ fi ++ fi ++ else ++ echo "configure: cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD ++ fi ++ else ++ echo "configure: failed program was:" >&AS_MESSAGE_LOG_FD ++ cat conftest.c >&AS_MESSAGE_LOG_FD ++ fi ++ rm -rf conftest* ++ ]) ++ sys_symbol_underscore=$lt_cv_sys_symbol_underscore ++ AC_SUBST([sys_symbol_underscore]) ++]) ++m4trace:/usr/share/aclocal/ltdl.m4:790: -1- AU_DEFUN([AC_LTDL_SYMBOL_USCORE], [m4_if($#, 0, [LT_SYS_SYMBOL_USCORE], [LT_SYS_SYMBOL_USCORE($@)])]) ++m4trace:/usr/share/aclocal/ltdl.m4:790: -1- AC_DEFUN([AC_LTDL_SYMBOL_USCORE], [AC_DIAGNOSE([obsolete], [The macro `AC_LTDL_SYMBOL_USCORE' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_SYS_SYMBOL_USCORE], [LT_SYS_SYMBOL_USCORE($@)])]) ++m4trace:/usr/share/aclocal/ltdl.m4:797: -1- AC_DEFUN([LT_FUNC_DLSYM_USCORE], [AC_REQUIRE([LT_SYS_SYMBOL_USCORE])dnl ++if test x"$lt_cv_sys_symbol_underscore" = xyes; then ++ if test x"$libltdl_cv_func_dlopen" = xyes || ++ test x"$libltdl_cv_lib_dl_dlopen" = xyes ; then ++ AC_CACHE_CHECK([whether we have to add an underscore for dlsym], ++ [libltdl_cv_need_uscore], ++ [libltdl_cv_need_uscore=unknown ++ save_LIBS="$LIBS" ++ LIBS="$LIBS $LIBADD_DLOPEN" ++ _LT_TRY_DLOPEN_SELF( ++ [libltdl_cv_need_uscore=no], [libltdl_cv_need_uscore=yes], ++ [], [libltdl_cv_need_uscore=cross]) ++ LIBS="$save_LIBS" ++ ]) ++ fi ++fi ++ ++if test x"$libltdl_cv_need_uscore" = xyes; then ++ AC_DEFINE([NEED_USCORE], [1], ++ [Define if dlsym() requires a leading underscore in symbol names.]) ++fi ++]) ++m4trace:/usr/share/aclocal/ltdl.m4:822: -1- AU_DEFUN([AC_LTDL_DLSYM_USCORE], [m4_if($#, 0, [LT_FUNC_DLSYM_USCORE], [LT_FUNC_DLSYM_USCORE($@)])]) ++m4trace:/usr/share/aclocal/ltdl.m4:822: -1- AC_DEFUN([AC_LTDL_DLSYM_USCORE], [AC_DIAGNOSE([obsolete], [The macro `AC_LTDL_DLSYM_USCORE' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_FUNC_DLSYM_USCORE], [LT_FUNC_DLSYM_USCORE($@)])]) ++m4trace:/usr/share/aclocal/pkg.m4:26: -1- AC_DEFUN([PKG_PROG_PKG_CONFIG], [m4_pattern_forbid([^_?PKG_[A-Z_]+$]) ++m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) ++AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl ++if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then ++ AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) ++fi ++if test -n "$PKG_CONFIG"; then ++ _pkg_min_version=m4_default([$1], [0.9.0]) ++ AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) ++ if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then ++ AC_MSG_RESULT([yes]) ++ else ++ AC_MSG_RESULT([no]) ++ PKG_CONFIG="" ++ fi ++ ++fi[]dnl ++]) ++m4trace:/usr/share/aclocal/pkg.m4:56: -1- AC_DEFUN([PKG_CHECK_EXISTS], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl ++if test -n "$PKG_CONFIG" && \ ++ AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then ++ m4_ifval([$2], [$2], [:]) ++m4_ifvaln([$3], [else ++ $3])dnl ++fi]) ++m4trace:/usr/share/aclocal/pkg.m4:84: -1- AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], [AC_REQUIRE([PKG_PROG_PKG_CONFIG]) ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi[]dnl ++]) ++m4trace:/usr/share/aclocal/pkg.m4:104: -1- AC_DEFUN([PKG_CHECK_MODULES], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl ++AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl ++AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl ++ ++pkg_failed=no ++AC_MSG_CHECKING([for $1]) ++ ++_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) ++_PKG_CONFIG([$1][_LIBS], [libs], [$2]) ++ ++m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS ++and $1[]_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details.]) ++ ++if test $pkg_failed = yes; then ++ _PKG_SHORT_ERRORS_SUPPORTED ++ if test $_pkg_short_errors_supported = yes; then ++ $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$2"` ++ else ++ $1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD ++ ++ ifelse([$4], , [AC_MSG_ERROR(dnl ++[Package requirements ($2) were not met: ++ ++$$1_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++_PKG_TEXT ++])], ++ [AC_MSG_RESULT([no]) ++ $4]) ++elif test $pkg_failed = untried; then ++ ifelse([$4], , [AC_MSG_FAILURE(dnl ++[The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++_PKG_TEXT ++ ++To get pkg-config, see .])], ++ [$4]) ++else ++ $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS ++ $1[]_LIBS=$pkg_cv_[]$1[]_LIBS ++ AC_MSG_RESULT([yes]) ++ ifelse([$3], , :, [$3]) ++fi[]dnl ++]) ++m4trace:/usr/share/aclocal-1.9/amversion.m4:13: -1- AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) ++m4trace:/usr/share/aclocal-1.9/amversion.m4:19: -1- AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.9.6])]) ++m4trace:/usr/share/aclocal-1.9/auxdir.m4:47: -1- AC_DEFUN([AM_AUX_DIR_EXPAND], [dnl Rely on autoconf to set up CDPATH properly. ++AC_PREREQ([2.50])dnl ++# expand $ac_aux_dir to an absolute path ++am_aux_dir=`cd $ac_aux_dir && pwd` ++]) ++m4trace:/usr/share/aclocal-1.9/cond.m4:15: -1- AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ(2.52)dnl ++ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], ++ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl ++AC_SUBST([$1_TRUE]) ++AC_SUBST([$1_FALSE]) ++if $2; then ++ $1_TRUE= ++ $1_FALSE='#' ++else ++ $1_TRUE='#' ++ $1_FALSE= ++fi ++AC_CONFIG_COMMANDS_PRE( ++[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then ++ AC_MSG_ERROR([[conditional "$1" was never defined. ++Usually this means the macro was only invoked conditionally.]]) ++fi])]) ++m4trace:/usr/share/aclocal-1.9/depend.m4:29: -1- AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl ++AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl ++AC_REQUIRE([AM_MAKE_INCLUDE])dnl ++AC_REQUIRE([AM_DEP_TRACK])dnl ++ ++ifelse([$1], CC, [depcc="$CC" am_compiler_list=], ++ [$1], CXX, [depcc="$CXX" am_compiler_list=], ++ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], ++ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], ++ [depcc="$$1" am_compiler_list=]) ++ ++AC_CACHE_CHECK([dependency style of $depcc], ++ [am_cv_$1_dependencies_compiler_type], ++[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then ++ # We make a subdir and do the tests there. Otherwise we can end up ++ # making bogus files that we don't know about and never remove. For ++ # instance it was reported that on HP-UX the gcc test will end up ++ # making a dummy file named `D' -- because `-MD' means `put the output ++ # in D'. ++ mkdir conftest.dir ++ # Copy depcomp to subdir because otherwise we won't find it if we're ++ # using a relative directory. ++ cp "$am_depcomp" conftest.dir ++ cd conftest.dir ++ # We will build objects and dependencies in a subdirectory because ++ # it helps to detect inapplicable dependency modes. For instance ++ # both Tru64's cc and ICC support -MD to output dependencies as a ++ # side effect of compilation, but ICC will put the dependencies in ++ # the current directory while Tru64 will put them in the object ++ # directory. ++ mkdir sub ++ ++ am_cv_$1_dependencies_compiler_type=none ++ if test "$am_compiler_list" = ""; then ++ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` ++ fi ++ for depmode in $am_compiler_list; do ++ # Setup a source with many dependencies, because some compilers ++ # like to wrap large dependency lists on column 80 (with \), and ++ # we should not choose a depcomp mode which is confused by this. ++ # ++ # We need to recreate these files for each test, as the compiler may ++ # overwrite some of them when testing with obscure command lines. ++ # This happens at least with the AIX C compiler. ++ : > sub/conftest.c ++ for i in 1 2 3 4 5 6; do ++ echo '#include "conftst'$i'.h"' >> sub/conftest.c ++ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with ++ # Solaris 8's {/usr,}/bin/sh. ++ touch sub/conftst$i.h ++ done ++ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf ++ ++ case $depmode in ++ nosideeffect) ++ # after this tag, mechanisms are not by side-effect, so they'll ++ # only be used when explicitly requested ++ if test "x$enable_dependency_tracking" = xyes; then ++ continue ++ else ++ break ++ fi ++ ;; ++ none) break ;; ++ esac ++ # We check with `-c' and `-o' for the sake of the "dashmstdout" ++ # mode. It turns out that the SunPro C++ compiler does not properly ++ # handle `-M -o', and we need to detect this. ++ if depmode=$depmode \ ++ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ ++ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ ++ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ ++ >/dev/null 2>conftest.err && ++ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && ++ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then ++ # icc doesn't choke on unknown options, it will just issue warnings ++ # or remarks (even with -Werror). So we grep stderr for any message ++ # that says an option was ignored or not supported. ++ # When given -MP, icc 7.0 and 7.1 complain thusly: ++ # icc: Command line warning: ignoring option '-M'; no argument required ++ # The diagnosis changed in icc 8.0: ++ # icc: Command line remark: option '-MP' not supported ++ if (grep 'ignoring option' conftest.err || ++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else ++ am_cv_$1_dependencies_compiler_type=$depmode ++ break ++ fi ++ fi ++ done ++ ++ cd .. ++ rm -rf conftest.dir ++else ++ am_cv_$1_dependencies_compiler_type=none ++fi ++]) ++AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) ++AM_CONDITIONAL([am__fastdep$1], [ ++ test "x$enable_dependency_tracking" != xno \ ++ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ++]) ++m4trace:/usr/share/aclocal-1.9/depend.m4:138: -1- AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl ++AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ++]) ++m4trace:/usr/share/aclocal-1.9/depend.m4:146: -1- AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE(dependency-tracking, ++[ --disable-dependency-tracking speeds up one-time build ++ --enable-dependency-tracking do not reject slow dependency extractors]) ++if test "x$enable_dependency_tracking" != xno; then ++ am_depcomp="$ac_aux_dir/depcomp" ++ AMDEPBACKSLASH='\' ++fi ++AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) ++AC_SUBST([AMDEPBACKSLASH]) ++]) ++m4trace:/usr/share/aclocal-1.9/depout.m4:14: -1- AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [for mf in $CONFIG_FILES; do ++ # Strip MF so we end up with the name of the file. ++ mf=`echo "$mf" | sed -e 's/:.*$//'` ++ # Check whether this is an Automake generated Makefile or not. ++ # We used to match only the files named `Makefile.in', but ++ # some people rename them; so instead we look at the file content. ++ # Grep'ing the first line is not enough: some people post-process ++ # each Makefile.in and add a new line on top of each file to say so. ++ # So let's grep whole file. ++ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then ++ dirpart=`AS_DIRNAME("$mf")` ++ else ++ continue ++ fi ++ # Extract the definition of DEPDIR, am__include, and am__quote ++ # from the Makefile without running `make'. ++ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` ++ test -z "$DEPDIR" && continue ++ am__include=`sed -n 's/^am__include = //p' < "$mf"` ++ test -z "am__include" && continue ++ am__quote=`sed -n 's/^am__quote = //p' < "$mf"` ++ # When using ansi2knr, U may be empty or an underscore; expand it ++ U=`sed -n 's/^U = //p' < "$mf"` ++ # Find all dependency output files, they are included files with ++ # $(DEPDIR) in their names. We invoke sed twice because it is the ++ # simplest approach to changing $(DEPDIR) to its actual value in the ++ # expansion. ++ for file in `sed -n " ++ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ ++ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do ++ # Make sure the directory exists. ++ test -f "$dirpart/$file" && continue ++ fdir=`AS_DIRNAME(["$file"])` ++ AS_MKDIR_P([$dirpart/$fdir]) ++ # echo "creating $dirpart/$file" ++ echo '# dummy' > "$dirpart/$file" ++ done ++done ++]) ++m4trace:/usr/share/aclocal-1.9/depout.m4:63: -1- AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], ++ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], ++ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ++]) ++m4trace:/usr/share/aclocal-1.9/header.m4:12: -1- AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) ++m4trace:/usr/share/aclocal-1.9/header.m4:12: -1- AC_DEFUN([AM_CONFIG_HEADER], [AC_DIAGNOSE([obsolete], [The macro `AM_CONFIG_HEADER' is obsolete. ++You should run autoupdate.])dnl ++AC_CONFIG_HEADERS($@)]) ++m4trace:/usr/share/aclocal-1.9/init.m4:26: -1- AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.58])dnl ++dnl Autoconf wants to disallow AM_ names. We explicitly allow ++dnl the ones we care about. ++m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl ++AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl ++AC_REQUIRE([AC_PROG_INSTALL])dnl ++# test to see if srcdir already configured ++if test "`cd $srcdir && pwd`" != "`pwd`" && ++ test -f $srcdir/config.status; then ++ AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) ++fi ++ ++# test whether we have cygpath ++if test -z "$CYGPATH_W"; then ++ if (cygpath --version) >/dev/null 2>/dev/null; then ++ CYGPATH_W='cygpath -w' ++ else ++ CYGPATH_W=echo ++ fi ++fi ++AC_SUBST([CYGPATH_W]) ++ ++# Define the identity of the package. ++dnl Distinguish between old-style and new-style calls. ++m4_ifval([$2], ++[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl ++ AC_SUBST([PACKAGE], [$1])dnl ++ AC_SUBST([VERSION], [$2])], ++[_AM_SET_OPTIONS([$1])dnl ++ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl ++ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl ++ ++_AM_IF_OPTION([no-define],, ++[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) ++ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl ++ ++# Some tools Automake needs. ++AC_REQUIRE([AM_SANITY_CHECK])dnl ++AC_REQUIRE([AC_ARG_PROGRAM])dnl ++AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) ++AM_MISSING_PROG(AUTOCONF, autoconf) ++AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) ++AM_MISSING_PROG(AUTOHEADER, autoheader) ++AM_MISSING_PROG(MAKEINFO, makeinfo) ++AM_PROG_INSTALL_SH ++AM_PROG_INSTALL_STRIP ++AC_REQUIRE([AM_PROG_MKDIR_P])dnl ++# We need awk for the "check" target. The system "awk" is bad on ++# some platforms. ++AC_REQUIRE([AC_PROG_AWK])dnl ++AC_REQUIRE([AC_PROG_MAKE_SET])dnl ++AC_REQUIRE([AM_SET_LEADING_DOT])dnl ++_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], ++ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], ++ [_AM_PROG_TAR([v7])])]) ++_AM_IF_OPTION([no-dependencies],, ++[AC_PROVIDE_IFELSE([AC_PROG_CC], ++ [_AM_DEPENDENCIES(CC)], ++ [define([AC_PROG_CC], ++ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl ++AC_PROVIDE_IFELSE([AC_PROG_CXX], ++ [_AM_DEPENDENCIES(CXX)], ++ [define([AC_PROG_CXX], ++ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl ++]) ++]) ++m4trace:/usr/share/aclocal-1.9/init.m4:102: -1- AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. ++_am_stamp_count=1 ++for _am_header in $config_headers :; do ++ case $_am_header in ++ $1 | $1:* ) ++ break ;; ++ * ) ++ _am_stamp_count=`expr $_am_stamp_count + 1` ;; ++ esac ++done ++echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) ++m4trace:/usr/share/aclocal-1.9/install-sh.m4:11: -1- AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ++install_sh=${install_sh-"$am_aux_dir/install-sh"} ++AC_SUBST(install_sh)]) ++m4trace:/usr/share/aclocal-1.9/lead-dot.m4:12: -1- AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null ++mkdir .tst 2>/dev/null ++if test -d .tst; then ++ am__leading_dot=. ++else ++ am__leading_dot=_ ++fi ++rmdir .tst 2>/dev/null ++AC_SUBST([am__leading_dot])]) ++m4trace:/usr/share/aclocal-1.9/make.m4:14: -1- AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} ++cat > confinc << 'END' ++am__doit: ++ @echo done ++.PHONY: am__doit ++END ++# If we don't find an include directive, just comment out the code. ++AC_MSG_CHECKING([for style of include used by $am_make]) ++am__include="#" ++am__quote= ++_am_result=none ++# First try GNU make style include. ++echo "include confinc" > confmf ++# We grep out `Entering directory' and `Leaving directory' ++# messages which can occur if `w' ends up in MAKEFLAGS. ++# In particular we don't look at `^make:' because GNU make might ++# be invoked under some other name (usually "gmake"), in which ++# case it prints its new name instead of `make'. ++if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then ++ am__include=include ++ am__quote= ++ _am_result=GNU ++fi ++# Now try BSD make style include. ++if test "$am__include" = "#"; then ++ echo '.include "confinc"' > confmf ++ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then ++ am__include=.include ++ am__quote="\"" ++ _am_result=BSD ++ fi ++fi ++AC_SUBST([am__include]) ++AC_SUBST([am__quote]) ++AC_MSG_RESULT([$_am_result]) ++rm -f confinc confmf ++]) ++m4trace:/usr/share/aclocal-1.9/minuso.m4:13: -1- AC_DEFUN([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC_C_O])dnl ++AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ++# FIXME: we rely on the cache variable name because ++# there is no other way. ++set dummy $CC ++ac_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']` ++if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" != yes"; then ++ # Losing compiler, so override with the script. ++ # FIXME: It is wrong to rewrite CC. ++ # But if we don't then we get into trouble of one sort or another. ++ # A longer-term fix would be to have automake use am__CC in this case, ++ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" ++ CC="$am_aux_dir/compile $CC" ++fi ++]) ++m4trace:/usr/share/aclocal-1.9/missing.m4:14: -1- AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) ++$1=${$1-"${am_missing_run}$2"} ++AC_SUBST($1)]) ++m4trace:/usr/share/aclocal-1.9/missing.m4:24: -1- AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ++test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" ++# Use eval to expand $SHELL ++if eval "$MISSING --run true"; then ++ am_missing_run="$MISSING --run " ++else ++ am_missing_run= ++ AC_MSG_WARN([`missing' script is too old or missing]) ++fi ++]) ++m4trace:/usr/share/aclocal-1.9/mkdirp.m4:30: -1- AC_DEFUN([AM_PROG_MKDIR_P], [if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then ++ # We used to keeping the `.' as first argument, in order to ++ # allow $(mkdir_p) to be used without argument. As in ++ # $(mkdir_p) $(somedir) ++ # where $(somedir) is conditionally defined. However this is wrong ++ # for two reasons: ++ # 1. if the package is installed by a user who cannot write `.' ++ # make install will fail, ++ # 2. the above comment should most certainly read ++ # $(mkdir_p) $(DESTDIR)$(somedir) ++ # so it does not work when $(somedir) is undefined and ++ # $(DESTDIR) is not. ++ # To support the latter case, we have to write ++ # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), ++ # so the `.' trick is pointless. ++ mkdir_p='mkdir -p --' ++else ++ # On NextStep and OpenStep, the `mkdir' command does not ++ # recognize any option. It will interpret all options as ++ # directories to create, and then abort because `.' already ++ # exists. ++ for d in ./-p ./--version; ++ do ++ test -d $d && rmdir $d ++ done ++ # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. ++ if test -f "$ac_aux_dir/mkinstalldirs"; then ++ mkdir_p='$(mkinstalldirs)' ++ else ++ mkdir_p='$(install_sh) -d' ++ fi ++fi ++AC_SUBST([mkdir_p])]) ++m4trace:/usr/share/aclocal-1.9/options.m4:13: -1- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) ++m4trace:/usr/share/aclocal-1.9/options.m4:19: -1- AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), 1)]) ++m4trace:/usr/share/aclocal-1.9/options.m4:25: -1- AC_DEFUN([_AM_SET_OPTIONS], [AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) ++m4trace:/usr/share/aclocal-1.9/options.m4:31: -1- AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) ++m4trace:/usr/share/aclocal-1.9/runlog.m4:12: -1- AC_DEFUN([AM_RUN_LOG], [{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD ++ ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD ++ (exit $ac_status); }]) ++m4trace:/usr/share/aclocal-1.9/sanity.m4:14: -1- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) ++# Just in case ++sleep 1 ++echo timestamp > conftest.file ++# Do `set' in a subshell so we don't clobber the current shell's ++# arguments. Must try -L first in case configure is actually a ++# symlink; some systems play weird games with the mod time of symlinks ++# (eg FreeBSD returns the mod time of the symlink's containing ++# directory). ++if ( ++ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` ++ if test "$[*]" = "X"; then ++ # -L didn't work. ++ set X `ls -t $srcdir/configure conftest.file` ++ fi ++ rm -f conftest.file ++ if test "$[*]" != "X $srcdir/configure conftest.file" \ ++ && test "$[*]" != "X conftest.file $srcdir/configure"; then ++ ++ # If neither matched, then we have a broken ls. This can happen ++ # if, for instance, CONFIG_SHELL is bash and it inherits a ++ # broken ls alias from the environment. This has actually ++ # happened. Such a system could not be considered "sane". ++ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken ++alias in your environment]) ++ fi ++ ++ test "$[2]" = conftest.file ++ ) ++then ++ # Ok. ++ : ++else ++ AC_MSG_ERROR([newly created file is older than distributed files! ++Check your system clock]) ++fi ++AC_MSG_RESULT(yes)]) ++m4trace:/usr/share/aclocal-1.9/strip.m4:17: -1- AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl ++# Installed binaries are usually stripped using `strip' when the user ++# run `make install-strip'. However `strip' might not be the right ++# tool to use in cross-compilation environments, therefore Automake ++# will honor the `STRIP' environment variable to overrule this program. ++dnl Don't test for $cross_compiling = yes, because it might be `maybe'. ++if test "$cross_compiling" != no; then ++ AC_CHECK_TOOL([STRIP], [strip], :) ++fi ++INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" ++AC_SUBST([INSTALL_STRIP_PROGRAM])]) ++m4trace:/usr/share/aclocal-1.9/tar.m4:24: -1- AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. ++AM_MISSING_PROG([AMTAR], [tar]) ++m4_if([$1], [v7], ++ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], ++ [m4_case([$1], [ustar],, [pax],, ++ [m4_fatal([Unknown tar format])]) ++AC_MSG_CHECKING([how to create a $1 tar archive]) ++# Loop over all known methods to create a tar archive until one works. ++_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' ++_am_tools=${am_cv_prog_tar_$1-$_am_tools} ++# Do not fold the above two line into one, because Tru64 sh and ++# Solaris sh will not grok spaces in the rhs of `-'. ++for _am_tool in $_am_tools ++do ++ case $_am_tool in ++ gnutar) ++ for _am_tar in tar gnutar gtar; ++ do ++ AM_RUN_LOG([$_am_tar --version]) && break ++ done ++ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' ++ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' ++ am__untar="$_am_tar -xf -" ++ ;; ++ plaintar) ++ # Must skip GNU tar: if it does not support --format= it doesn't create ++ # ustar tarball either. ++ (tar --version) >/dev/null 2>&1 && continue ++ am__tar='tar chf - "$$tardir"' ++ am__tar_='tar chf - "$tardir"' ++ am__untar='tar xf -' ++ ;; ++ pax) ++ am__tar='pax -L -x $1 -w "$$tardir"' ++ am__tar_='pax -L -x $1 -w "$tardir"' ++ am__untar='pax -r' ++ ;; ++ cpio) ++ am__tar='find "$$tardir" -print | cpio -o -H $1 -L' ++ am__tar_='find "$tardir" -print | cpio -o -H $1 -L' ++ am__untar='cpio -i -H $1 -d' ++ ;; ++ none) ++ am__tar=false ++ am__tar_=false ++ am__untar=false ++ ;; ++ esac ++ ++ # If the value was cached, stop now. We just wanted to have am__tar ++ # and am__untar set. ++ test -n "${am_cv_prog_tar_$1}" && break ++ ++ # tar/untar a dummy directory, and stop if the command works ++ rm -rf conftest.dir ++ mkdir conftest.dir ++ echo GrepMe > conftest.dir/file ++ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) ++ rm -rf conftest.dir ++ if test -s conftest.tar; then ++ AM_RUN_LOG([$am__untar /dev/null 2>&1 && break ++ fi ++done ++rm -rf conftest.dir ++ ++AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) ++AC_MSG_RESULT([$am_cv_prog_tar_$1])]) ++AC_SUBST([am__tar]) ++AC_SUBST([am__untar]) ++]) ++m4trace:m4/gnome-doc-utils.m4:3: -1- AC_DEFUN([GNOME_DOC_DEFINES], [ ++AC_ARG_WITH([help-dir], ++ AC_HELP_STRING([--with-help-dir=DIR], [path to help docs]),, ++ [with_help_dir='${datadir}/gnome/help']) ++HELP_DIR="$with_help_dir" ++AC_SUBST(HELP_DIR) ++ ++AC_ARG_WITH([omf-dir], ++ AC_HELP_STRING([--with-omf-dir=DIR], [path to OMF files]),, ++ [with_omf_dir='${datadir}/omf']) ++OMF_DIR="$with_omf_dir" ++AC_SUBST(OMF_DIR) ++ ++AC_ARG_WITH([help-formats], ++ AC_HELP_STRING([--with-help-formats=FORMATS], [list of formats]),, ++ [with_help_formats='']) ++DOC_USER_FORMATS="$with_help_formats" ++AC_SUBST(DOC_USER_FORMATS) ++ ++AC_ARG_ENABLE([scrollkeeper], ++ [AC_HELP_STRING([--disable-scrollkeeper], ++ [do not make updates to the scrollkeeper database])],, ++ enable_scrollkeeper=yes) ++AM_CONDITIONAL([ENABLE_SK],[test "$gdu_cv_have_gdu" = "yes" -a "$enable_scrollkeeper" = "yes"]) ++ ++dnl disable scrollkeeper automatically for distcheck ++DISTCHECK_CONFIGURE_FLAGS="--disable-scrollkeeper $DISTCHECK_CONFIGURE_FLAGS" ++AC_SUBST(DISTCHECK_CONFIGURE_FLAGS) ++ ++AM_CONDITIONAL([HAVE_GNOME_DOC_UTILS],[test "$gdu_cv_have_gdu" = "yes"]) ++]) ++m4trace:m4/gnome-doc-utils.m4:38: -1- AC_DEFUN([GNOME_DOC_INIT], [ ++ifelse([$1],,[gdu_cv_version_required=0.3.2],[gdu_cv_version_required=$1]) ++ ++PKG_CHECK_EXISTS([gnome-doc-utils >= $gdu_cv_version_required], ++ [gdu_cv_have_gdu=yes],[gdu_cv_have_gdu=no]) ++ ++if test "$gdu_cv_have_gdu" = "yes"; then ++ ifelse([$2],,[:],[$2]) ++else ++ ifelse([$3],,[AC_MSG_ERROR([gnome-doc-utils >= $gdu_cv_version_required not found])],[$3]) ++fi ++ ++GNOME_DOC_DEFINES ++]) ++m4trace:m4/intltool.m4:27: -1- AC_DEFUN([IT_PROG_INTLTOOL], [AC_PREREQ([2.50])dnl ++ ++case "$am__api_version" in ++ 1.[01234]) ++ AC_MSG_ERROR([Automake 1.5 or newer is required to use intltool]) ++ ;; ++ *) ++ ;; ++esac ++ ++if test -n "$1"; then ++ AC_MSG_CHECKING([for intltool >= $1]) ++ ++ INTLTOOL_REQUIRED_VERSION_AS_INT=`echo $1 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` ++ INTLTOOL_APPLIED_VERSION=`awk -F\" '/\\$VERSION / { print $ 2; }' ${ac_aux_dir}/intltool-update.in` ++ [INTLTOOL_APPLIED_VERSION_AS_INT=`awk -F\" '/\\$VERSION / { split($ 2, VERSION, "."); print VERSION[1] * 1000 + VERSION[2] * 100 + VERSION[3];}' ${ac_aux_dir}/intltool-update.in` ++ ] ++ AC_MSG_RESULT([$INTLTOOL_APPLIED_VERSION found]) ++ test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || ++ AC_MSG_ERROR([Your intltool is too old. You need intltool $1 or later.]) ++fi ++ ++ INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -p $(top_srcdir)/po $< [$]@' ++ INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u /tmp $< [$]@' ++ INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ ++AC_SUBST(INTLTOOL_DESKTOP_RULE) ++AC_SUBST(INTLTOOL_DIRECTORY_RULE) ++AC_SUBST(INTLTOOL_KEYS_RULE) ++AC_SUBST(INTLTOOL_PROP_RULE) ++AC_SUBST(INTLTOOL_OAF_RULE) ++AC_SUBST(INTLTOOL_PONG_RULE) ++AC_SUBST(INTLTOOL_SERVER_RULE) ++AC_SUBST(INTLTOOL_SHEET_RULE) ++AC_SUBST(INTLTOOL_SOUNDLIST_RULE) ++AC_SUBST(INTLTOOL_UI_RULE) ++AC_SUBST(INTLTOOL_XAM_RULE) ++AC_SUBST(INTLTOOL_KBD_RULE) ++AC_SUBST(INTLTOOL_XML_RULE) ++AC_SUBST(INTLTOOL_XML_NOMERGE_RULE) ++AC_SUBST(INTLTOOL_CAVES_RULE) ++AC_SUBST(INTLTOOL_SCHEMAS_RULE) ++AC_SUBST(INTLTOOL_THEME_RULE) ++AC_SUBST(INTLTOOL_SERVICE_RULE) ++AC_SUBST(INTLTOOL_POLICY_RULE) ++ ++# Check the gettext tools to make sure they are GNU ++AC_PATH_PROG(XGETTEXT, xgettext) ++AC_PATH_PROG(MSGMERGE, msgmerge) ++AC_PATH_PROG(MSGFMT, msgfmt) ++if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then ++ AC_MSG_ERROR([GNU gettext tools not found; required for intltool]) ++fi ++xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" ++mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" ++mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" ++if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then ++ AC_MSG_ERROR([GNU gettext tools not found; required for intltool]) ++fi ++ ++# Use the tools built into the package, not the ones that are installed. ++AC_SUBST(INTLTOOL_EXTRACT, '$(top_builddir)/intltool-extract') ++AC_SUBST(INTLTOOL_MERGE, '$(top_builddir)/intltool-merge') ++AC_SUBST(INTLTOOL_UPDATE, '$(top_builddir)/intltool-update') ++ ++AC_PATH_PROG(INTLTOOL_PERL, perl) ++if test -z "$INTLTOOL_PERL"; then ++ AC_MSG_ERROR([perl not found; required for intltool]) ++fi ++if test -z "`$INTLTOOL_PERL -v | fgrep '5.' 2> /dev/null`"; then ++ AC_MSG_ERROR([perl 5.x required for intltool]) ++fi ++if test "x$2" != "xno-xml"; then ++ AC_MSG_CHECKING([for XML::Parser]) ++ if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then ++ AC_MSG_RESULT([ok]) ++ else ++ AC_MSG_ERROR([XML::Parser perl module is required for intltool]) ++ fi ++fi ++ ++# Substitute ALL_LINGUAS so we can use it in po/Makefile ++AC_SUBST(ALL_LINGUAS) ++ ++# Set DATADIRNAME correctly if it is not set yet ++# (copied from glib-gettext.m4) ++if test -z "$DATADIRNAME"; then ++ AC_LINK_IFELSE( ++ [AC_LANG_PROGRAM([[]], ++ [[extern int _nl_msg_cat_cntr; ++ return _nl_msg_cat_cntr]])], ++ [DATADIRNAME=share], ++ [case $host in ++ *-*-solaris*) ++ dnl On Solaris, if bind_textdomain_codeset is in libc, ++ dnl GNU format message catalog is always supported, ++ dnl since both are added to the libc all together. ++ dnl Hence, we'd like to go with DATADIRNAME=share ++ dnl in this case. ++ AC_CHECK_FUNC(bind_textdomain_codeset, ++ [DATADIRNAME=share], [DATADIRNAME=lib]) ++ ;; ++ *) ++ [DATADIRNAME=lib] ++ ;; ++ esac]) ++fi ++AC_SUBST(DATADIRNAME) ++ ++IT_PO_SUBDIR([po]) ++ ++dnl The following is very similar to ++dnl ++dnl AC_CONFIG_FILES([intltool-extract intltool-merge intltool-update]) ++dnl ++dnl with the following slight differences: ++dnl - the *.in files are in ac_aux_dir, ++dnl - if the file haven't changed upon reconfigure, it's not touched, ++dnl - the evaluation of the third parameter enables a hack which computes ++dnl the actual value of $libdir, ++dnl - the user sees "executing intltool commands", instead of ++dnl "creating intltool-extract" and such. ++dnl ++dnl Nothing crucial here, and we could use AC_CONFIG_FILES, if there were ++dnl a reason for it. ++ ++AC_CONFIG_COMMANDS([intltool], [ ++ ++for file in intltool-extract intltool-merge intltool-update; do ++ sed -e "s|@INTLTOOL_EXTRACT@|`pwd`/intltool-extract|g" \ ++ -e "s|@INTLTOOL_LIBDIR@|${INTLTOOL_LIBDIR}|g" \ ++ -e "s|@INTLTOOL_PERL@|${INTLTOOL_PERL}|g" \ ++ < ${ac_aux_dir}/${file}.in > ${file}.out ++ if cmp -s ${file} ${file}.out 2>/dev/null; then ++ rm -f ${file}.out ++ else ++ mv -f ${file}.out ${file} ++ fi ++ chmod ugo+x ${file} ++ chmod u+w ${file} ++done ++ ++], ++[INTLTOOL_PERL='${INTLTOOL_PERL}' ac_aux_dir='${ac_aux_dir}' ++prefix="$prefix" exec_prefix="$exec_prefix" INTLTOOL_LIBDIR="$libdir" ++INTLTOOL_EXTRACT='${INTLTOOL_EXTRACT}']) ++ ++]) ++m4trace:m4/intltool.m4:199: -1- AC_DEFUN([IT_PO_SUBDIR], [AC_PREREQ([2.53])dnl We use ac_top_srcdir inside AC_CONFIG_COMMANDS. ++dnl ++dnl The following CONFIG_COMMANDS should be exetuted at the very end ++dnl of config.status. ++AC_CONFIG_COMMANDS_PRE([ ++ AC_CONFIG_COMMANDS([$1/stamp-it], [ ++ rm -f "$1/stamp-it" "$1/stamp-it.tmp" "$1/POTFILES" "$1/Makefile.tmp" ++ >"$1/stamp-it.tmp" ++ [sed '/^#/d ++ s/^[[].*] *// ++ /^[ ]*$/d ++ '"s|^| $ac_top_srcdir/|" \ ++ "$srcdir/$1/POTFILES.in" | sed '$!s/$/ \\/' >"$1/POTFILES" ++ ] ++ if test ! -f "$1/Makefile"; then ++ AC_MSG_ERROR([$1/Makefile is not ready.]) ++ fi ++ mv "$1/Makefile" "$1/Makefile.tmp" ++ [sed '/^POTFILES =/,/[^\\]$/ { ++ /^POTFILES =/!d ++ r $1/POTFILES ++ } ++ ' "$1/Makefile.tmp" >"$1/Makefile"] ++ rm -f "$1/Makefile.tmp" ++ mv "$1/stamp-it.tmp" "$1/stamp-it" ++ ]) ++])dnl ++]) ++m4trace:m4/intltool.m4:231: -1- AU_DEFUN([AC_PROG_INTLTOOL], [m4_if($#, 0, [IT_PROG_INTLTOOL], [IT_PROG_INTLTOOL($@)])]) ++m4trace:m4/intltool.m4:231: -1- AC_DEFUN([AC_PROG_INTLTOOL], [AC_DIAGNOSE([obsolete], [The macro `AC_PROG_INTLTOOL' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [IT_PROG_INTLTOOL], [IT_PROG_INTLTOOL($@)])]) ++m4trace:m4/libtool.m4:67: -1- AC_DEFUN([LT_INIT], [AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT ++AC_BEFORE([$0], [LT_LANG])dnl ++AC_BEFORE([$0], [LT_OUTPUT])dnl ++AC_BEFORE([$0], [LTDL_INIT])dnl ++m4_require([_LT_CHECK_BUILDDIR])dnl ++ ++dnl Autoconf doesn't catch unexpanded LT_ macros by default: ++m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl ++m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl ++dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 ++dnl unless we require an AC_DEFUNed macro: ++AC_REQUIRE([LTOPTIONS_VERSION])dnl ++AC_REQUIRE([LTSUGAR_VERSION])dnl ++AC_REQUIRE([LTVERSION_VERSION])dnl ++AC_REQUIRE([LTOBSOLETE_VERSION])dnl ++m4_require([_LT_PROG_LTMAIN])dnl ++ ++dnl Parse OPTIONS ++_LT_SET_OPTIONS([$0], [$1]) ++ ++# This can be used to rebuild libtool when needed ++LIBTOOL_DEPS="$ltmain" ++ ++# Always use our own libtool. ++LIBTOOL='$(SHELL) $(top_builddir)/libtool' ++AC_SUBST(LIBTOOL)dnl ++ ++_LT_SETUP ++ ++# Only expand once: ++m4_define([LT_INIT]) ++]) ++m4trace:m4/libtool.m4:102: -1- AU_DEFUN([AC_PROG_LIBTOOL], [m4_if($#, 0, [LT_INIT], [LT_INIT($@)])]) ++m4trace:m4/libtool.m4:102: -1- AC_DEFUN([AC_PROG_LIBTOOL], [AC_DIAGNOSE([obsolete], [The macro `AC_PROG_LIBTOOL' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_INIT], [LT_INIT($@)])]) ++m4trace:m4/libtool.m4:103: -1- AU_DEFUN([AM_PROG_LIBTOOL], [m4_if($#, 0, [LT_INIT], [LT_INIT($@)])]) ++m4trace:m4/libtool.m4:103: -1- AC_DEFUN([AM_PROG_LIBTOOL], [AC_DIAGNOSE([obsolete], [The macro `AM_PROG_LIBTOOL' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_INIT], [LT_INIT($@)])]) ++m4trace:m4/libtool.m4:562: -1- AC_DEFUN([LT_OUTPUT], [: ${CONFIG_LT=./config.lt} ++AC_MSG_NOTICE([creating $CONFIG_LT]) ++cat >"$CONFIG_LT" <<_LTEOF ++#! $SHELL ++# Generated by $as_me. ++# Run this file to recreate a libtool stub with the current configuration. ++ ++lt_cl_silent=false ++SHELL=\${CONFIG_SHELL-$SHELL} ++_LTEOF ++ ++cat >>"$CONFIG_LT" <<\_LTEOF ++AS_SHELL_SANITIZE ++_AS_PREPARE ++ ++exec AS_MESSAGE_FD>&1 ++exec AS_MESSAGE_LOG_FD>>config.log ++{ ++ echo ++ AS_BOX([Running $as_me.]) ++} >&AS_MESSAGE_LOG_FD ++ ++lt_cl_help="\ ++\`$as_me' creates a local libtool stub from the current configuration, ++for use in further configure time tests before the real libtool is ++generated. ++ ++Usage: $[0] [[OPTIONS]] ++ ++ -h, --help print this help, then exit ++ -V, --version print version number, then exit ++ -q, --quiet do not print progress messages ++ -d, --debug don't remove temporary files ++ ++Report bugs to ." ++ ++lt_cl_version="\ ++m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl ++m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) ++configured by $[0], generated by m4_PACKAGE_STRING. ++ ++Copyright (C) 2008 Free Software Foundation, Inc. ++This config.lt script is free software; the Free Software Foundation ++gives unlimited permision to copy, distribute and modify it." ++ ++while test $[#] != 0 ++do ++ case $[1] in ++ --version | --v* | -V ) ++ echo "$lt_cl_version"; exit 0 ;; ++ --help | --h* | -h ) ++ echo "$lt_cl_help"; exit 0 ;; ++ --debug | --d* | -d ) ++ debug=: ;; ++ --quiet | --q* | --silent | --s* | -q ) ++ lt_cl_silent=: ;; ++ ++ -*) AC_MSG_ERROR([unrecognized option: $[1] ++Try \`$[0] --help' for more information.]) ;; ++ ++ *) AC_MSG_ERROR([unrecognized argument: $[1] ++Try \`$[0] --help' for more information.]) ;; ++ esac ++ shift ++done ++ ++if $lt_cl_silent; then ++ exec AS_MESSAGE_FD>/dev/null ++fi ++_LTEOF ++ ++cat >>"$CONFIG_LT" <<_LTEOF ++_LT_OUTPUT_LIBTOOL_COMMANDS_INIT ++_LTEOF ++ ++cat >>"$CONFIG_LT" <<\_LTEOF ++AC_MSG_NOTICE([creating $ofile]) ++_LT_OUTPUT_LIBTOOL_COMMANDS ++AS_EXIT(0) ++_LTEOF ++chmod +x "$CONFIG_LT" ++ ++# configure is writing to config.log, but config.lt does its own redirection, ++# appending to config.log, which fails on DOS, as config.log is still kept ++# open by configure. Here we exec the FD to /dev/null, effectively closing ++# config.log, so it can be properly (re)opened and appended to by config.lt. ++if test "$no_create" != yes; then ++ lt_cl_success=: ++ test "$silent" = yes && ++ lt_config_lt_args="$lt_config_lt_args --quiet" ++ exec AS_MESSAGE_LOG_FD>/dev/null ++ $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false ++ exec AS_MESSAGE_LOG_FD>>config.log ++ $lt_cl_success || AS_EXIT(1) ++fi ++]) ++m4trace:m4/libtool.m4:757: -1- AC_DEFUN([LT_SUPPORTED_TAG], []) ++m4trace:m4/libtool.m4:768: -1- AC_DEFUN([LT_LANG], [AC_BEFORE([$0], [LT_OUTPUT])dnl ++m4_case([$1], ++ [C], [_LT_LANG(C)], ++ [C++], [_LT_LANG(CXX)], ++ [Java], [_LT_LANG(GCJ)], ++ [Fortran 77], [_LT_LANG(F77)], ++ [Fortran], [_LT_LANG(FC)], ++ [Windows Resource], [_LT_LANG(RC)], ++ [m4_ifdef([_LT_LANG_]$1[_CONFIG], ++ [_LT_LANG($1)], ++ [m4_fatal([$0: unsupported language: "$1"])])])dnl ++]) ++m4trace:m4/libtool.m4:830: -1- AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) ++m4trace:m4/libtool.m4:830: -1- AC_DEFUN([AC_LIBTOOL_CXX], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_CXX' is obsolete. ++You should run autoupdate.])dnl ++LT_LANG(C++)]) ++m4trace:m4/libtool.m4:831: -1- AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) ++m4trace:m4/libtool.m4:831: -1- AC_DEFUN([AC_LIBTOOL_F77], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_F77' is obsolete. ++You should run autoupdate.])dnl ++LT_LANG(Fortran 77)]) ++m4trace:m4/libtool.m4:832: -1- AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) ++m4trace:m4/libtool.m4:832: -1- AC_DEFUN([AC_LIBTOOL_FC], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_FC' is obsolete. ++You should run autoupdate.])dnl ++LT_LANG(Fortran)]) ++m4trace:m4/libtool.m4:833: -1- AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) ++m4trace:m4/libtool.m4:833: -1- AC_DEFUN([AC_LIBTOOL_GCJ], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_GCJ' is obsolete. ++You should run autoupdate.])dnl ++LT_LANG(Java)]) ++m4trace:m4/libtool.m4:1398: -1- AC_DEFUN([_LT_COMPILER_OPTION], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_DECL_SED])dnl ++AC_CACHE_CHECK([$1], [$2], ++ [$2=no ++ m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="$3" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&AS_MESSAGE_LOG_FD ++ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ $2=yes ++ fi ++ fi ++ $RM conftest* ++]) ++ ++if test x"[$]$2" = xyes; then ++ m4_if([$5], , :, [$5]) ++else ++ m4_if([$6], , :, [$6]) ++fi ++]) ++m4trace:m4/libtool.m4:1440: -1- AU_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [m4_if($#, 0, [_LT_COMPILER_OPTION], [_LT_COMPILER_OPTION($@)])]) ++m4trace:m4/libtool.m4:1440: -1- AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_COMPILER_OPTION' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [_LT_COMPILER_OPTION], [_LT_COMPILER_OPTION($@)])]) ++m4trace:m4/libtool.m4:1449: -1- AC_DEFUN([_LT_LINKER_OPTION], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_DECL_SED])dnl ++AC_CACHE_CHECK([$1], [$2], ++ [$2=no ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS $3" ++ echo "$lt_simple_link_test_code" > conftest.$ac_ext ++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then ++ # The linker can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ if test -s conftest.err; then ++ # Append any errors to the config.log. ++ cat conftest.err 1>&AS_MESSAGE_LOG_FD ++ $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if diff conftest.exp conftest.er2 >/dev/null; then ++ $2=yes ++ fi ++ else ++ $2=yes ++ fi ++ fi ++ $RM -r conftest* ++ LDFLAGS="$save_LDFLAGS" ++]) ++ ++if test x"[$]$2" = xyes; then ++ m4_if([$4], , :, [$4]) ++else ++ m4_if([$5], , :, [$5]) ++fi ++]) ++m4trace:m4/libtool.m4:1484: -1- AU_DEFUN([AC_LIBTOOL_LINKER_OPTION], [m4_if($#, 0, [_LT_LINKER_OPTION], [_LT_LINKER_OPTION($@)])]) ++m4trace:m4/libtool.m4:1484: -1- AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_LINKER_OPTION' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [_LT_LINKER_OPTION], [_LT_LINKER_OPTION($@)])]) ++m4trace:m4/libtool.m4:1491: -1- AC_DEFUN([LT_CMD_MAX_LEN], [AC_REQUIRE([AC_CANONICAL_HOST])dnl ++# find the maximum length of command line arguments ++AC_MSG_CHECKING([the maximum length of command line arguments]) ++AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl ++ i=0 ++ teststring="ABCD" ++ ++ case $build_os in ++ msdosdjgpp*) ++ # On DJGPP, this test can blow up pretty badly due to problems in libc ++ # (any single argument exceeding 2000 bytes causes a buffer overrun ++ # during glob expansion). Even if it were fixed, the result of this ++ # check would be larger than it should be. ++ lt_cv_sys_max_cmd_len=12288; # 12K is about right ++ ;; ++ ++ gnu*) ++ # Under GNU Hurd, this test is not required because there is ++ # no limit to the length of command line arguments. ++ # Libtool will interpret -1 as no limit whatsoever ++ lt_cv_sys_max_cmd_len=-1; ++ ;; ++ ++ cygwin* | mingw*) ++ # On Win9x/ME, this test blows up -- it succeeds, but takes ++ # about 5 minutes as the teststring grows exponentially. ++ # Worse, since 9x/ME are not pre-emptively multitasking, ++ # you end up with a "frozen" computer, even though with patience ++ # the test eventually succeeds (with a max line length of 256k). ++ # Instead, let's just punt: use the minimum linelength reported by ++ # all of the supported platforms: 8192 (on NT/2K/XP). ++ lt_cv_sys_max_cmd_len=8192; ++ ;; ++ ++ amigaos*) ++ # On AmigaOS with pdksh, this test takes hours, literally. ++ # So we just punt and use a minimum line length of 8192. ++ lt_cv_sys_max_cmd_len=8192; ++ ;; ++ ++ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) ++ # This has been around since 386BSD, at least. Likely further. ++ if test -x /sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` ++ elif test -x /usr/sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` ++ else ++ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs ++ fi ++ # And add a safety zone ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ ;; ++ ++ interix*) ++ # We know the value 262144 and hardcode it with a safety zone (like BSD) ++ lt_cv_sys_max_cmd_len=196608 ++ ;; ++ ++ osf*) ++ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure ++ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not ++ # nice to cause kernel panics so lets avoid the loop below. ++ # First set a reasonable default. ++ lt_cv_sys_max_cmd_len=16384 ++ # ++ if test -x /sbin/sysconfig; then ++ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in ++ *1*) lt_cv_sys_max_cmd_len=-1 ;; ++ esac ++ fi ++ ;; ++ sco3.2v5*) ++ lt_cv_sys_max_cmd_len=102400 ++ ;; ++ sysv5* | sco5v6* | sysv4.2uw2*) ++ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` ++ if test -n "$kargmax"; then ++ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` ++ else ++ lt_cv_sys_max_cmd_len=32768 ++ fi ++ ;; ++ *) ++ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` ++ if test -n "$lt_cv_sys_max_cmd_len"; then ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ else ++ # Make teststring a little bigger before we do anything with it. ++ # a 1K string should be a reasonable start. ++ for i in 1 2 3 4 5 6 7 8 ; do ++ teststring=$teststring$teststring ++ done ++ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} ++ # If test is not a shell built-in, we'll probably end up computing a ++ # maximum length that is only half of the actual maximum length, but ++ # we can't tell. ++ while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ ++ = "XX$teststring$teststring"; } >/dev/null 2>&1 && ++ test $i != 17 # 1/2 MB should be enough ++ do ++ i=`expr $i + 1` ++ teststring=$teststring$teststring ++ done ++ # Only check the string length outside the loop. ++ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` ++ teststring= ++ # Add a significant safety factor because C++ compilers can tack on ++ # massive amounts of additional arguments before passing them to the ++ # linker. It appears as though 1/2 is a usable value. ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` ++ fi ++ ;; ++ esac ++]) ++if test -n $lt_cv_sys_max_cmd_len ; then ++ AC_MSG_RESULT($lt_cv_sys_max_cmd_len) ++else ++ AC_MSG_RESULT(none) ++fi ++max_cmd_len=$lt_cv_sys_max_cmd_len ++_LT_DECL([], [max_cmd_len], [0], ++ [What is the maximum length of a command?]) ++]) ++m4trace:m4/libtool.m4:1619: -1- AU_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [m4_if($#, 0, [LT_CMD_MAX_LEN], [LT_CMD_MAX_LEN($@)])]) ++m4trace:m4/libtool.m4:1619: -1- AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_SYS_MAX_CMD_LEN' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_CMD_MAX_LEN], [LT_CMD_MAX_LEN($@)])]) ++m4trace:m4/libtool.m4:1724: -1- AC_DEFUN([LT_SYS_DLOPEN_SELF], [m4_require([_LT_HEADER_DLFCN])dnl ++if test "x$enable_dlopen" != xyes; then ++ enable_dlopen=unknown ++ enable_dlopen_self=unknown ++ enable_dlopen_self_static=unknown ++else ++ lt_cv_dlopen=no ++ lt_cv_dlopen_libs= ++ ++ case $host_os in ++ beos*) ++ lt_cv_dlopen="load_add_on" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes ++ ;; ++ ++ mingw* | pw32*) ++ lt_cv_dlopen="LoadLibrary" ++ lt_cv_dlopen_libs= ++ ;; ++ ++ cygwin*) ++ lt_cv_dlopen="dlopen" ++ lt_cv_dlopen_libs= ++ ;; ++ ++ darwin*) ++ # if libdl is installed we need to link against it ++ AC_CHECK_LIB([dl], [dlopen], ++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ ++ lt_cv_dlopen="dyld" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes ++ ]) ++ ;; ++ ++ *) ++ AC_CHECK_FUNC([shl_load], ++ [lt_cv_dlopen="shl_load"], ++ [AC_CHECK_LIB([dld], [shl_load], ++ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], ++ [AC_CHECK_FUNC([dlopen], ++ [lt_cv_dlopen="dlopen"], ++ [AC_CHECK_LIB([dl], [dlopen], ++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], ++ [AC_CHECK_LIB([svld], [dlopen], ++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], ++ [AC_CHECK_LIB([dld], [dld_link], ++ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) ++ ]) ++ ]) ++ ]) ++ ]) ++ ]) ++ ;; ++ esac ++ ++ if test "x$lt_cv_dlopen" != xno; then ++ enable_dlopen=yes ++ else ++ enable_dlopen=no ++ fi ++ ++ case $lt_cv_dlopen in ++ dlopen) ++ save_CPPFLAGS="$CPPFLAGS" ++ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" ++ ++ save_LDFLAGS="$LDFLAGS" ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" ++ ++ save_LIBS="$LIBS" ++ LIBS="$lt_cv_dlopen_libs $LIBS" ++ ++ AC_CACHE_CHECK([whether a program can dlopen itself], ++ lt_cv_dlopen_self, [dnl ++ _LT_TRY_DLOPEN_SELF( ++ lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, ++ lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) ++ ]) ++ ++ if test "x$lt_cv_dlopen_self" = xyes; then ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" ++ AC_CACHE_CHECK([whether a statically linked program can dlopen itself], ++ lt_cv_dlopen_self_static, [dnl ++ _LT_TRY_DLOPEN_SELF( ++ lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, ++ lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) ++ ]) ++ fi ++ ++ CPPFLAGS="$save_CPPFLAGS" ++ LDFLAGS="$save_LDFLAGS" ++ LIBS="$save_LIBS" ++ ;; ++ esac ++ ++ case $lt_cv_dlopen_self in ++ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; ++ *) enable_dlopen_self=unknown ;; ++ esac ++ ++ case $lt_cv_dlopen_self_static in ++ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; ++ *) enable_dlopen_self_static=unknown ;; ++ esac ++fi ++_LT_DECL([dlopen_support], [enable_dlopen], [0], ++ [Whether dlopen is supported]) ++_LT_DECL([dlopen_self], [enable_dlopen_self], [0], ++ [Whether dlopen of programs is supported]) ++_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], ++ [Whether dlopen of statically linked programs is supported]) ++]) ++m4trace:m4/libtool.m4:1841: -1- AU_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [m4_if($#, 0, [LT_SYS_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF($@)])]) ++m4trace:m4/libtool.m4:1841: -1- AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_DLOPEN_SELF' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_SYS_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF($@)])]) ++m4trace:m4/libtool.m4:2740: -1- AC_DEFUN([_LT_PATH_TOOL_PREFIX], [m4_require([_LT_DECL_EGREP])dnl ++AC_MSG_CHECKING([for $1]) ++AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, ++[case $MAGIC_CMD in ++[[\\/*] | ?:[\\/]*]) ++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ++ ;; ++*) ++ lt_save_MAGIC_CMD="$MAGIC_CMD" ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++dnl $ac_dummy forces splitting on constant user-supplied paths. ++dnl POSIX.2 word splitting is done only on the output of word expansions, ++dnl not every word. This closes a longstanding sh security hole. ++ ac_dummy="m4_if([$2], , $PATH, [$2])" ++ for ac_dir in $ac_dummy; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$1; then ++ lt_cv_path_MAGIC_CMD="$ac_dir/$1" ++ if test -n "$file_magic_test_file"; then ++ case $deplibs_check_method in ++ "file_magic "*) ++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` ++ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | ++ $EGREP "$file_magic_regex" > /dev/null; then ++ : ++ else ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: the command libtool uses to detect shared libraries, ++*** $file_magic_cmd, produces output that libtool cannot recognize. ++*** The result is that libtool may fail to recognize shared libraries ++*** as such. This will affect the creation of libtool libraries that ++*** depend on shared libraries, but programs linked with such libtool ++*** libraries will work regardless of this problem. Nevertheless, you ++*** may want to report the problem to your system manager and/or to ++*** bug-libtool@gnu.org ++ ++_LT_EOF ++ fi ;; ++ esac ++ fi ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" ++ MAGIC_CMD="$lt_save_MAGIC_CMD" ++ ;; ++esac]) ++MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++if test -n "$MAGIC_CMD"; then ++ AC_MSG_RESULT($MAGIC_CMD) ++else ++ AC_MSG_RESULT(no) ++fi ++_LT_DECL([], [MAGIC_CMD], [0], ++ [Used to examine libraries when file_magic_cmd begins with "file"])dnl ++]) ++m4trace:m4/libtool.m4:2802: -1- AU_DEFUN([AC_PATH_TOOL_PREFIX], [m4_if($#, 0, [_LT_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX($@)])]) ++m4trace:m4/libtool.m4:2802: -1- AC_DEFUN([AC_PATH_TOOL_PREFIX], [AC_DIAGNOSE([obsolete], [The macro `AC_PATH_TOOL_PREFIX' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [_LT_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX($@)])]) ++m4trace:m4/libtool.m4:2825: -1- AC_DEFUN([LT_PATH_LD], [AC_REQUIRE([AC_PROG_CC])dnl ++AC_REQUIRE([AC_CANONICAL_HOST])dnl ++AC_REQUIRE([AC_CANONICAL_BUILD])dnl ++m4_require([_LT_DECL_SED])dnl ++m4_require([_LT_DECL_EGREP])dnl ++ ++AC_ARG_WITH([gnu-ld], ++ [AS_HELP_STRING([--with-gnu-ld], ++ [assume the C compiler uses GNU ld @<:@default=no@:>@])], ++ [test "$withval" = no || with_gnu_ld=yes], ++ [with_gnu_ld=no])dnl ++ ++ac_prog=ld ++if test "$GCC" = yes; then ++ # Check if gcc -print-prog-name=ld gives a path. ++ AC_MSG_CHECKING([for ld used by $CC]) ++ case $host in ++ *-*-mingw*) ++ # gcc leaves a trailing carriage return which upsets mingw ++ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; ++ *) ++ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; ++ esac ++ case $ac_prog in ++ # Accept absolute paths. ++ [[\\/]]* | ?:[[\\/]]*) ++ re_direlt='/[[^/]][[^/]]*/\.\./' ++ # Canonicalize the pathname of ld ++ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` ++ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ++ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` ++ done ++ test -z "$LD" && LD="$ac_prog" ++ ;; ++ "") ++ # If it fails, then pretend we aren't using GCC. ++ ac_prog=ld ++ ;; ++ *) ++ # If it is relative, then search for the first ld in PATH. ++ with_gnu_ld=unknown ++ ;; ++ esac ++elif test "$with_gnu_ld" = yes; then ++ AC_MSG_CHECKING([for GNU ld]) ++else ++ AC_MSG_CHECKING([for non-GNU ld]) ++fi ++AC_CACHE_VAL(lt_cv_path_LD, ++[if test -z "$LD"; then ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then ++ lt_cv_path_LD="$ac_dir/$ac_prog" ++ # Check to see if the program is GNU ld. I'd rather use --version, ++ # but apparently some variants of GNU ld only accept -v. ++ # Break only if it was the GNU/non-GNU ld that we prefer. ++ case `"$lt_cv_path_LD" -v 2>&1 &1 | sed '1q'` in ++ */dev/null* | *'Invalid file or object type'*) ++ lt_cv_path_NM="$tmp_nm -B" ++ break ++ ;; ++ *) ++ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in ++ */dev/null*) ++ lt_cv_path_NM="$tmp_nm -p" ++ break ++ ;; ++ *) ++ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but ++ continue # so that we can try to find one that supports BSD flags ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ done ++ IFS="$lt_save_ifs" ++ done ++ : ${lt_cv_path_NM=no} ++fi]) ++if test "$lt_cv_path_NM" != "no"; then ++ NM="$lt_cv_path_NM" ++else ++ # Didn't find any BSD compatible name lister, look for dumpbin. ++ AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :) ++ AC_SUBST([DUMPBIN]) ++ if test "$DUMPBIN" != ":"; then ++ NM="$DUMPBIN" ++ fi ++fi ++test -z "$NM" && NM=nm ++AC_SUBST([NM]) ++_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl ++ ++AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], ++ [lt_cv_nm_interface="BSD nm" ++ echo "int some_variable = 0;" > conftest.$ac_ext ++ (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD) ++ (eval "$ac_compile" 2>conftest.err) ++ cat conftest.err >&AS_MESSAGE_LOG_FD ++ (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) ++ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) ++ cat conftest.err >&AS_MESSAGE_LOG_FD ++ (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD) ++ cat conftest.out >&AS_MESSAGE_LOG_FD ++ if $GREP 'External.*some_variable' conftest.out > /dev/null; then ++ lt_cv_nm_interface="MS dumpbin" ++ fi ++ rm -f conftest*]) ++]) ++m4trace:m4/libtool.m4:3249: -1- AU_DEFUN([AM_PROG_NM], [m4_if($#, 0, [LT_PATH_NM], [LT_PATH_NM($@)])]) ++m4trace:m4/libtool.m4:3249: -1- AC_DEFUN([AM_PROG_NM], [AC_DIAGNOSE([obsolete], [The macro `AM_PROG_NM' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_PATH_NM], [LT_PATH_NM($@)])]) ++m4trace:m4/libtool.m4:3250: -1- AU_DEFUN([AC_PROG_NM], [m4_if($#, 0, [LT_PATH_NM], [LT_PATH_NM($@)])]) ++m4trace:m4/libtool.m4:3250: -1- AC_DEFUN([AC_PROG_NM], [AC_DIAGNOSE([obsolete], [The macro `AC_PROG_NM' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_PATH_NM], [LT_PATH_NM($@)])]) ++m4trace:m4/libtool.m4:3259: -1- AC_DEFUN([LT_LIB_M], [AC_REQUIRE([AC_CANONICAL_HOST])dnl ++LIBM= ++case $host in ++*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) ++ # These system don't have libm, or don't need it ++ ;; ++*-ncr-sysv4.3*) ++ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") ++ AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") ++ ;; ++*) ++ AC_CHECK_LIB(m, cos, LIBM="-lm") ++ ;; ++esac ++AC_SUBST([LIBM]) ++]) ++m4trace:m4/libtool.m4:3278: -1- AU_DEFUN([AC_CHECK_LIBM], [m4_if($#, 0, [LT_LIB_M], [LT_LIB_M($@)])]) ++m4trace:m4/libtool.m4:3278: -1- AC_DEFUN([AC_CHECK_LIBM], [AC_DIAGNOSE([obsolete], [The macro `AC_CHECK_LIBM' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_LIB_M], [LT_LIB_M($@)])]) ++m4trace:m4/libtool.m4:6947: -1- AC_DEFUN([LT_PROG_GCJ], [m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], ++ [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], ++ [AC_CHECK_TOOL(GCJ, gcj,) ++ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" ++ AC_SUBST(GCJFLAGS)])])[]dnl ++]) ++m4trace:m4/libtool.m4:6956: -1- AU_DEFUN([LT_AC_PROG_GCJ], [m4_if($#, 0, [LT_PROG_GCJ], [LT_PROG_GCJ($@)])]) ++m4trace:m4/libtool.m4:6956: -1- AC_DEFUN([LT_AC_PROG_GCJ], [AC_DIAGNOSE([obsolete], [The macro `LT_AC_PROG_GCJ' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_PROG_GCJ], [LT_PROG_GCJ($@)])]) ++m4trace:m4/libtool.m4:6963: -1- AC_DEFUN([LT_PROG_RC], [AC_CHECK_TOOL(RC, windres,) ++]) ++m4trace:m4/libtool.m4:6968: -1- AU_DEFUN([LT_AC_PROG_RC], [m4_if($#, 0, [LT_PROG_RC], [LT_PROG_RC($@)])]) ++m4trace:m4/libtool.m4:6968: -1- AC_DEFUN([LT_AC_PROG_RC], [AC_DIAGNOSE([obsolete], [The macro `LT_AC_PROG_RC' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [LT_PROG_RC], [LT_PROG_RC($@)])]) ++m4trace:m4/libtool.m4:7067: -1- AU_DEFUN([LT_AC_PROG_SED], [m4_if($#, 0, [AC_PROG_SED], [AC_PROG_SED($@)])]) ++m4trace:m4/libtool.m4:7067: -1- AC_DEFUN([LT_AC_PROG_SED], [AC_DIAGNOSE([obsolete], [The macro `LT_AC_PROG_SED' is obsolete. ++You should run autoupdate.])dnl ++m4_if($#, 0, [AC_PROG_SED], [AC_PROG_SED($@)])]) ++m4trace:m4/ltoptions.m4:13: -1- AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) ++m4trace:m4/ltoptions.m4:110: -1- AU_DEFUN([AC_LIBTOOL_DLOPEN], [_LT_SET_OPTION([LT_INIT], [dlopen]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you ++put the `dlopen' option into LT_INIT's first parameter.]) ++]) ++m4trace:m4/ltoptions.m4:110: -1- AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_DLOPEN' is obsolete. ++You should run autoupdate.])dnl ++_LT_SET_OPTION([LT_INIT], [dlopen]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you ++put the `dlopen' option into LT_INIT's first parameter.]) ++]) ++m4trace:m4/ltoptions.m4:145: -1- AU_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_REQUIRE([AC_CANONICAL_HOST])dnl ++_LT_SET_OPTION([LT_INIT], [win32-dll]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you ++put the `win32-dll' option into LT_INIT's first parameter.]) ++]) ++m4trace:m4/ltoptions.m4:145: -1- AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_WIN32_DLL' is obsolete. ++You should run autoupdate.])dnl ++AC_REQUIRE([AC_CANONICAL_HOST])dnl ++_LT_SET_OPTION([LT_INIT], [win32-dll]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you ++put the `win32-dll' option into LT_INIT's first parameter.]) ++]) ++m4trace:m4/ltoptions.m4:194: -1- AC_DEFUN([AC_ENABLE_SHARED], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) ++]) ++m4trace:m4/ltoptions.m4:198: -1- AC_DEFUN([AC_DISABLE_SHARED], [_LT_SET_OPTION([LT_INIT], [disable-shared]) ++]) ++m4trace:m4/ltoptions.m4:202: -1- AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) ++m4trace:m4/ltoptions.m4:202: -1- AC_DEFUN([AM_ENABLE_SHARED], [AC_DIAGNOSE([obsolete], [The macro `AM_ENABLE_SHARED' is obsolete. ++You should run autoupdate.])dnl ++AC_ENABLE_SHARED($@)]) ++m4trace:m4/ltoptions.m4:203: -1- AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) ++m4trace:m4/ltoptions.m4:203: -1- AC_DEFUN([AM_DISABLE_SHARED], [AC_DIAGNOSE([obsolete], [The macro `AM_DISABLE_SHARED' is obsolete. ++You should run autoupdate.])dnl ++AC_DISABLE_SHARED($@)]) ++m4trace:m4/ltoptions.m4:248: -1- AC_DEFUN([AC_ENABLE_STATIC], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) ++]) ++m4trace:m4/ltoptions.m4:252: -1- AC_DEFUN([AC_DISABLE_STATIC], [_LT_SET_OPTION([LT_INIT], [disable-static]) ++]) ++m4trace:m4/ltoptions.m4:256: -1- AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) ++m4trace:m4/ltoptions.m4:256: -1- AC_DEFUN([AM_ENABLE_STATIC], [AC_DIAGNOSE([obsolete], [The macro `AM_ENABLE_STATIC' is obsolete. ++You should run autoupdate.])dnl ++AC_ENABLE_STATIC($@)]) ++m4trace:m4/ltoptions.m4:257: -1- AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) ++m4trace:m4/ltoptions.m4:257: -1- AC_DEFUN([AM_DISABLE_STATIC], [AC_DIAGNOSE([obsolete], [The macro `AM_DISABLE_STATIC' is obsolete. ++You should run autoupdate.])dnl ++AC_DISABLE_STATIC($@)]) ++m4trace:m4/ltoptions.m4:302: -1- AU_DEFUN([AC_ENABLE_FAST_INSTALL], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you put ++the `fast-install' option into LT_INIT's first parameter.]) ++]) ++m4trace:m4/ltoptions.m4:302: -1- AC_DEFUN([AC_ENABLE_FAST_INSTALL], [AC_DIAGNOSE([obsolete], [The macro `AC_ENABLE_FAST_INSTALL' is obsolete. ++You should run autoupdate.])dnl ++_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you put ++the `fast-install' option into LT_INIT's first parameter.]) ++]) ++m4trace:m4/ltoptions.m4:309: -1- AU_DEFUN([AC_DISABLE_FAST_INSTALL], [_LT_SET_OPTION([LT_INIT], [disable-fast-install]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you put ++the `disable-fast-install' option into LT_INIT's first parameter.]) ++]) ++m4trace:m4/ltoptions.m4:309: -1- AC_DEFUN([AC_DISABLE_FAST_INSTALL], [AC_DIAGNOSE([obsolete], [The macro `AC_DISABLE_FAST_INSTALL' is obsolete. ++You should run autoupdate.])dnl ++_LT_SET_OPTION([LT_INIT], [disable-fast-install]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you put ++the `disable-fast-install' option into LT_INIT's first parameter.]) ++]) ++m4trace:m4/ltoptions.m4:342: -1- AU_DEFUN([AC_LIBTOOL_PICMODE], [_LT_SET_OPTION([LT_INIT], [pic-only]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you ++put the `pic-only' option into LT_INIT's first parameter.]) ++]) ++m4trace:m4/ltoptions.m4:342: -1- AC_DEFUN([AC_LIBTOOL_PICMODE], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_PICMODE' is obsolete. ++You should run autoupdate.])dnl ++_LT_SET_OPTION([LT_INIT], [pic-only]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you ++put the `pic-only' option into LT_INIT's first parameter.]) ++]) ++m4trace:m4/ltsugar.m4:13: -1- AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) ++m4trace:m4/ltversion.m4:18: -1- AC_DEFUN([LTVERSION_VERSION], [macro_version='2.2.4' ++macro_revision='1.2976' ++_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) ++_LT_DECL(, macro_revision, 0) ++]) ++m4trace:m4/lt~obsolete.m4:36: -1- AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) ++m4trace:m4/lt~obsolete.m4:40: -1- AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH]) ++m4trace:m4/lt~obsolete.m4:41: -1- AC_DEFUN([_LT_AC_SHELL_INIT]) ++m4trace:m4/lt~obsolete.m4:42: -1- AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX]) ++m4trace:m4/lt~obsolete.m4:44: -1- AC_DEFUN([_LT_AC_TAGVAR]) ++m4trace:m4/lt~obsolete.m4:45: -1- AC_DEFUN([AC_LTDL_ENABLE_INSTALL]) ++m4trace:m4/lt~obsolete.m4:46: -1- AC_DEFUN([AC_LTDL_PREOPEN]) ++m4trace:m4/lt~obsolete.m4:47: -1- AC_DEFUN([_LT_AC_SYS_COMPILER]) ++m4trace:m4/lt~obsolete.m4:48: -1- AC_DEFUN([_LT_AC_LOCK]) ++m4trace:m4/lt~obsolete.m4:49: -1- AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE]) ++m4trace:m4/lt~obsolete.m4:50: -1- AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF]) ++m4trace:m4/lt~obsolete.m4:51: -1- AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O]) ++m4trace:m4/lt~obsolete.m4:52: -1- AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS]) ++m4trace:m4/lt~obsolete.m4:53: -1- AC_DEFUN([AC_LIBTOOL_OBJDIR]) ++m4trace:m4/lt~obsolete.m4:54: -1- AC_DEFUN([AC_LTDL_OBJDIR]) ++m4trace:m4/lt~obsolete.m4:55: -1- AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH]) ++m4trace:m4/lt~obsolete.m4:56: -1- AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP]) ++m4trace:m4/lt~obsolete.m4:57: -1- AC_DEFUN([AC_PATH_MAGIC]) ++m4trace:m4/lt~obsolete.m4:58: -1- AC_DEFUN([AC_PROG_LD_GNU]) ++m4trace:m4/lt~obsolete.m4:59: -1- AC_DEFUN([AC_PROG_LD_RELOAD_FLAG]) ++m4trace:m4/lt~obsolete.m4:60: -1- AC_DEFUN([AC_DEPLIBS_CHECK_METHOD]) ++m4trace:m4/lt~obsolete.m4:61: -1- AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI]) ++m4trace:m4/lt~obsolete.m4:62: -1- AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE]) ++m4trace:m4/lt~obsolete.m4:63: -1- AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC]) ++m4trace:m4/lt~obsolete.m4:64: -1- AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS]) ++m4trace:m4/lt~obsolete.m4:65: -1- AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP]) ++m4trace:m4/lt~obsolete.m4:66: -1- AC_DEFUN([LT_AC_PROG_EGREP]) ++m4trace:m4/lt~obsolete.m4:71: -1- AC_DEFUN([_AC_PROG_LIBTOOL]) ++m4trace:m4/lt~obsolete.m4:72: -1- AC_DEFUN([AC_LIBTOOL_SETUP]) ++m4trace:m4/lt~obsolete.m4:73: -1- AC_DEFUN([_LT_AC_CHECK_DLFCN]) ++m4trace:m4/lt~obsolete.m4:74: -1- AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER]) ++m4trace:m4/lt~obsolete.m4:75: -1- AC_DEFUN([_LT_AC_TAGCONFIG]) ++m4trace:m4/lt~obsolete.m4:77: -1- AC_DEFUN([_LT_AC_LANG_CXX]) ++m4trace:m4/lt~obsolete.m4:78: -1- AC_DEFUN([_LT_AC_LANG_F77]) ++m4trace:m4/lt~obsolete.m4:79: -1- AC_DEFUN([_LT_AC_LANG_GCJ]) ++m4trace:m4/lt~obsolete.m4:80: -1- AC_DEFUN([AC_LIBTOOL_RC]) ++m4trace:m4/lt~obsolete.m4:81: -1- AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG]) ++m4trace:m4/lt~obsolete.m4:82: -1- AC_DEFUN([_LT_AC_LANG_C_CONFIG]) ++m4trace:m4/lt~obsolete.m4:83: -1- AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG]) ++m4trace:m4/lt~obsolete.m4:84: -1- AC_DEFUN([_LT_AC_LANG_CXX_CONFIG]) ++m4trace:m4/lt~obsolete.m4:85: -1- AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG]) ++m4trace:m4/lt~obsolete.m4:86: -1- AC_DEFUN([_LT_AC_LANG_F77_CONFIG]) ++m4trace:m4/lt~obsolete.m4:87: -1- AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG]) ++m4trace:m4/lt~obsolete.m4:88: -1- AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG]) ++m4trace:m4/lt~obsolete.m4:89: -1- AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG]) ++m4trace:m4/lt~obsolete.m4:90: -1- AC_DEFUN([_LT_AC_LANG_RC_CONFIG]) ++m4trace:m4/lt~obsolete.m4:91: -1- AC_DEFUN([AC_LIBTOOL_CONFIG]) ++m4trace:m4/lt~obsolete.m4:92: -1- AC_DEFUN([_LT_AC_FILE_LTDLL_C]) ++m4trace:configure.ac:3: -1- m4_pattern_forbid([^_?A[CHUM]_]) ++m4trace:configure.ac:3: -1- m4_pattern_forbid([_AC_]) ++m4trace:configure.ac:3: -1- m4_pattern_forbid([^LIBOBJS$], [do not use LIBOBJS directly, use AC_LIBOBJ (see section `AC_LIBOBJ vs LIBOBJS']) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^AS_FLAGS$]) ++m4trace:configure.ac:3: -1- m4_pattern_forbid([^_?m4_]) ++m4trace:configure.ac:3: -1- m4_pattern_forbid([^dnl$]) ++m4trace:configure.ac:3: -1- m4_pattern_forbid([^_?AS_]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^SHELL$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PATH_SEPARATOR$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE_NAME$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE_TARNAME$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE_VERSION$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE_STRING$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^exec_prefix$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^prefix$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^program_transform_name$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^bindir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^sbindir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^libexecdir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^datarootdir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^datadir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^sysconfdir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^sharedstatedir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^localstatedir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^includedir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^oldincludedir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^docdir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^infodir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^htmldir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^dvidir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^pdfdir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^psdir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^libdir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^localedir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^mandir$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE_NAME$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE_TARNAME$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE_VERSION$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE_STRING$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^DEFS$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^ECHO_C$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^ECHO_N$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^ECHO_T$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^LIBS$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^build_alias$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^host_alias$]) ++m4trace:configure.ac:3: -1- m4_pattern_allow([^target_alias$]) ++m4trace:configure.ac:5: -1- AM_INIT_AUTOMAKE([gnome-power-manager], [2.24.0]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^AM_[A-Z]+FLAGS$]) ++m4trace:configure.ac:5: -1- AM_SET_CURRENT_AUTOMAKE_VERSION ++m4trace:configure.ac:5: -1- AM_AUTOMAKE_VERSION([1.9.6]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^INSTALL_PROGRAM$]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^INSTALL_SCRIPT$]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^INSTALL_DATA$]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^CYGPATH_W$]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^PACKAGE$]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^VERSION$]) ++m4trace:configure.ac:5: -1- _AM_IF_OPTION([no-define], [], [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) ++ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])]) ++m4trace:configure.ac:5: -2- _AM_MANGLE_OPTION([no-define]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^PACKAGE$]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^VERSION$]) ++m4trace:configure.ac:5: -1- AM_SANITY_CHECK ++m4trace:configure.ac:5: -1- AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) ++m4trace:configure.ac:5: -1- AM_MISSING_HAS_RUN ++m4trace:configure.ac:5: -1- AM_AUX_DIR_EXPAND ++m4trace:configure.ac:5: -1- m4_pattern_allow([^ACLOCAL$]) ++m4trace:configure.ac:5: -1- AM_MISSING_PROG([AUTOCONF], [autoconf]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^AUTOCONF$]) ++m4trace:configure.ac:5: -1- AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^AUTOMAKE$]) ++m4trace:configure.ac:5: -1- AM_MISSING_PROG([AUTOHEADER], [autoheader]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^AUTOHEADER$]) ++m4trace:configure.ac:5: -1- AM_MISSING_PROG([MAKEINFO], [makeinfo]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^MAKEINFO$]) ++m4trace:configure.ac:5: -1- AM_PROG_INSTALL_SH ++m4trace:configure.ac:5: -1- m4_pattern_allow([^install_sh$]) ++m4trace:configure.ac:5: -1- AM_PROG_INSTALL_STRIP ++m4trace:configure.ac:5: -1- m4_pattern_allow([^STRIP$]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^INSTALL_STRIP_PROGRAM$]) ++m4trace:configure.ac:5: -1- AM_PROG_MKDIR_P ++m4trace:configure.ac:5: -1- m4_pattern_allow([^mkdir_p$]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^AWK$]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^SET_MAKE$]) ++m4trace:configure.ac:5: -1- AM_SET_LEADING_DOT ++m4trace:configure.ac:5: -1- m4_pattern_allow([^am__leading_dot$]) ++m4trace:configure.ac:5: -1- _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], ++ [_AM_PROG_TAR([v7])])]) ++m4trace:configure.ac:5: -2- _AM_MANGLE_OPTION([tar-ustar]) ++m4trace:configure.ac:5: -1- _AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])]) ++m4trace:configure.ac:5: -2- _AM_MANGLE_OPTION([tar-pax]) ++m4trace:configure.ac:5: -1- _AM_PROG_TAR([v7]) ++m4trace:configure.ac:5: -1- AM_MISSING_PROG([AMTAR], [tar]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^AMTAR$]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^am__tar$]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^am__untar$]) ++m4trace:configure.ac:5: -1- _AM_IF_OPTION([no-dependencies], [], [AC_PROVIDE_IFELSE([AC_PROG_CC], ++ [_AM_DEPENDENCIES(CC)], ++ [define([AC_PROG_CC], ++ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl ++AC_PROVIDE_IFELSE([AC_PROG_CXX], ++ [_AM_DEPENDENCIES(CXX)], ++ [define([AC_PROG_CXX], ++ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl ++]) ++m4trace:configure.ac:5: -2- _AM_MANGLE_OPTION([no-dependencies]) ++m4trace:configure.ac:6: -1- AM_CONFIG_HEADER([config.h]) ++m4trace:configure.ac:6: -1- _m4_warn([obsolete], [The macro `AM_CONFIG_HEADER' is obsolete. ++You should run autoupdate.], [/usr/share/aclocal-1.9/header.m4:12: AM_CONFIG_HEADER is expanded from... ++configure.ac:6: the top level]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^CC$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^CFLAGS$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^LDFLAGS$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^LIBS$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^CPPFLAGS$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^CC$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^CC$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^CC$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^CC$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^ac_ct_CC$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^EXEEXT$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^OBJEXT$]) ++m4trace:configure.ac:9: -1- _AM_DEPENDENCIES([CC]) ++m4trace:configure.ac:9: -1- AM_SET_DEPDIR ++m4trace:configure.ac:9: -1- m4_pattern_allow([^DEPDIR$]) ++m4trace:configure.ac:9: -1- AM_OUTPUT_DEPENDENCY_COMMANDS ++m4trace:configure.ac:9: -1- AM_MAKE_INCLUDE ++m4trace:configure.ac:9: -1- m4_pattern_allow([^am__include$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^am__quote$]) ++m4trace:configure.ac:9: -1- AM_DEP_TRACK ++m4trace:configure.ac:9: -1- AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^AMDEP_TRUE$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^AMDEP_FALSE$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^AMDEPBACKSLASH$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^CCDEPMODE$]) ++m4trace:configure.ac:9: -1- AM_CONDITIONAL([am__fastdepCC], [ ++ test "x$enable_dependency_tracking" != xno \ ++ && test "$am_cv_CC_dependencies_compiler_type" = gcc3]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^am__fastdepCC_TRUE$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^am__fastdepCC_FALSE$]) ++m4trace:configure.ac:10: -1- AM_PROG_CC_C_O ++m4trace:configure.ac:10: -1- m4_pattern_allow([^NO_MINUS_C_MINUS_O$]) ++m4trace:configure.ac:12: -1- m4_pattern_allow([^INSTALL_PROGRAM$]) ++m4trace:configure.ac:12: -1- m4_pattern_allow([^INSTALL_SCRIPT$]) ++m4trace:configure.ac:12: -1- m4_pattern_allow([^INSTALL_DATA$]) ++m4trace:configure.ac:13: -1- AM_PROG_LIBTOOL ++m4trace:configure.ac:13: -1- _m4_warn([obsolete], [The macro `AM_PROG_LIBTOOL' is obsolete. ++You should run autoupdate.], [m4/libtool.m4:103: AM_PROG_LIBTOOL is expanded from... ++configure.ac:13: the top level]) ++m4trace:configure.ac:13: -1- LT_INIT ++m4trace:configure.ac:13: -1- m4_pattern_forbid([^_?LT_[A-Z_]+$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$]) ++m4trace:configure.ac:13: -1- LTOPTIONS_VERSION ++m4trace:configure.ac:13: -1- LTSUGAR_VERSION ++m4trace:configure.ac:13: -1- LTVERSION_VERSION ++m4trace:configure.ac:13: -1- LTOBSOLETE_VERSION ++m4trace:configure.ac:13: -1- _LT_PROG_LTMAIN ++m4trace:configure.ac:13: -1- m4_pattern_allow([^LIBTOOL$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^build$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^build_cpu$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^build_vendor$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^build_os$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^host$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^host_cpu$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^host_vendor$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^host_os$]) ++m4trace:configure.ac:13: -1- LT_PATH_LD ++m4trace:configure.ac:13: -1- m4_pattern_allow([^SED$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^SED$]) ++m4trace:configure.ac:13: -1- AC_PROG_EGREP ++m4trace:configure.ac:13: -1- m4_pattern_allow([^GREP$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^GREP$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^EGREP$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^EGREP$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^FGREP$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^FGREP$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^GREP$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^LD$]) ++m4trace:configure.ac:13: -1- LT_PATH_NM ++m4trace:configure.ac:13: -1- m4_pattern_allow([^DUMPBIN$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^ac_ct_DUMPBIN$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^DUMPBIN$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^NM$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^LN_S$]) ++m4trace:configure.ac:13: -1- LT_CMD_MAX_LEN ++m4trace:configure.ac:13: -1- m4_pattern_allow([^AR$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^STRIP$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^RANLIB$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([LT_OBJDIR]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^LT_OBJDIR$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^lt_ECHO$]) ++m4trace:configure.ac:13: -1- _LT_CC_BASENAME([$compiler]) ++m4trace:configure.ac:13: -1- _LT_PATH_TOOL_PREFIX([${ac_tool_prefix}file], [/usr/bin$PATH_SEPARATOR$PATH]) ++m4trace:configure.ac:13: -1- _LT_PATH_TOOL_PREFIX([file], [/usr/bin$PATH_SEPARATOR$PATH]) ++m4trace:configure.ac:13: -1- LT_SUPPORTED_TAG([CC]) ++m4trace:configure.ac:13: -1- _LT_COMPILER_BOILERPLATE ++m4trace:configure.ac:13: -1- _LT_LINKER_BOILERPLATE ++m4trace:configure.ac:13: -1- _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], [lt_cv_prog_compiler_rtti_exceptions], [-fno-rtti -fno-exceptions], [], [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, )="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, ) -fno-rtti -fno-exceptions"]) ++m4trace:configure.ac:13: -1- _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, ) works], [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, )], [$_LT_TAGVAR(lt_prog_compiler_pic, )@&t@m4_if([],[],[ -DPIC],[m4_if([],[CXX],[ -DPIC],[])])], [], [case $_LT_TAGVAR(lt_prog_compiler_pic, ) in ++ "" | " "*) ;; ++ *) _LT_TAGVAR(lt_prog_compiler_pic, )=" $_LT_TAGVAR(lt_prog_compiler_pic, )" ;; ++ esac], [_LT_TAGVAR(lt_prog_compiler_pic, )= ++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, )=no]) ++m4trace:configure.ac:13: -1- _LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], [lt_cv_prog_compiler_static_works], [$lt_tmp_static_flag], [], [_LT_TAGVAR(lt_prog_compiler_static, )=]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^DSYMUTIL$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^NMEDIT$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^LIPO$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^OTOOL$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^OTOOL64$]) ++m4trace:configure.ac:13: -1- LT_SYS_DLOPEN_SELF ++m4trace:configure.ac:13: -1- m4_pattern_allow([^CPP$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^CPPFLAGS$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^CPP$]) ++m4trace:configure.ac:13: -1- m4_pattern_allow([^STDC_HEADERS$]) ++m4trace:configure.ac:14: -1- IT_PROG_INTLTOOL([0.35.0]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_DESKTOP_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_DIRECTORY_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_KEYS_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_PROP_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_OAF_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_PONG_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_SERVER_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_SHEET_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_SOUNDLIST_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_UI_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_XAM_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_KBD_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_XML_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_XML_NOMERGE_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_CAVES_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_SCHEMAS_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_THEME_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_SERVICE_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_POLICY_RULE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^XGETTEXT$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^MSGMERGE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^MSGFMT$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_EXTRACT$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_MERGE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_UPDATE$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^INTLTOOL_PERL$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^ALL_LINGUAS$]) ++m4trace:configure.ac:14: -1- m4_pattern_allow([^DATADIRNAME$]) ++m4trace:configure.ac:14: -1- IT_PO_SUBDIR([po]) ++m4trace:configure.ac:16: -1- GNOME_COMPILE_WARNINGS ++m4trace:configure.ac:16: -2- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from... ++/usr/share/aclocal/gnome-compiler-flags.m4:4: GNOME_COMPILE_WARNINGS is expanded from... ++configure.ac:16: the top level]) ++m4trace:configure.ac:16: -1- _m4_warn([obsolete], [The macro `AC_TRY_COMPILE' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:2367: AC_TRY_COMPILE is expanded from... ++/usr/share/aclocal/gnome-compiler-flags.m4:4: GNOME_COMPILE_WARNINGS is expanded from... ++configure.ac:16: the top level]) ++m4trace:configure.ac:16: -2- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from... ++/usr/share/aclocal/gnome-compiler-flags.m4:4: GNOME_COMPILE_WARNINGS is expanded from... ++configure.ac:16: the top level]) ++m4trace:configure.ac:16: -1- m4_pattern_allow([^WARN_CFLAGS$]) ++m4trace:configure.ac:17: -1- GNOME_DOC_INIT ++m4trace:configure.ac:17: -1- PKG_CHECK_EXISTS([gnome-doc-utils >= $gdu_cv_version_required], [gdu_cv_have_gdu=yes], [gdu_cv_have_gdu=no]) ++m4trace:configure.ac:17: -1- PKG_PROG_PKG_CONFIG ++m4trace:configure.ac:17: -1- m4_pattern_forbid([^_?PKG_[A-Z_]+$]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^PKG_CONFIG$]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^PKG_CONFIG$]) ++m4trace:configure.ac:17: -1- GNOME_DOC_DEFINES ++m4trace:configure.ac:17: -2- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from... ++m4/gnome-doc-utils.m4:3: GNOME_DOC_DEFINES is expanded from... ++m4/gnome-doc-utils.m4:38: GNOME_DOC_INIT is expanded from... ++configure.ac:17: the top level]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^HELP_DIR$]) ++m4trace:configure.ac:17: -2- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from... ++m4/gnome-doc-utils.m4:3: GNOME_DOC_DEFINES is expanded from... ++m4/gnome-doc-utils.m4:38: GNOME_DOC_INIT is expanded from... ++configure.ac:17: the top level]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^OMF_DIR$]) ++m4trace:configure.ac:17: -2- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from... ++m4/gnome-doc-utils.m4:3: GNOME_DOC_DEFINES is expanded from... ++m4/gnome-doc-utils.m4:38: GNOME_DOC_INIT is expanded from... ++configure.ac:17: the top level]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^DOC_USER_FORMATS$]) ++m4trace:configure.ac:17: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from... ++../../lib/autoconf/general.m4:1364: AC_ARG_ENABLE is expanded from... ++m4/gnome-doc-utils.m4:3: GNOME_DOC_DEFINES is expanded from... ++m4/gnome-doc-utils.m4:38: GNOME_DOC_INIT is expanded from... ++configure.ac:17: the top level]) ++m4trace:configure.ac:17: -1- AM_CONDITIONAL([ENABLE_SK], [test "$gdu_cv_have_gdu" = "yes" -a "$enable_scrollkeeper" = "yes"]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^ENABLE_SK_TRUE$]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^ENABLE_SK_FALSE$]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^DISTCHECK_CONFIGURE_FLAGS$]) ++m4trace:configure.ac:17: -1- AM_CONDITIONAL([HAVE_GNOME_DOC_UTILS], [test "$gdu_cv_have_gdu" = "yes"]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^HAVE_GNOME_DOC_UTILS_TRUE$]) ++m4trace:configure.ac:17: -1- m4_pattern_allow([^HAVE_GNOME_DOC_UTILS_FALSE$]) ++m4trace:configure.ac:19: -1- m4_pattern_allow([^GLIB_GENMARSHAL$]) ++m4trace:configure.ac:45: -1- m4_pattern_allow([^GETTEXT_PACKAGE$]) ++m4trace:configure.ac:46: -1- m4_pattern_allow([^GETTEXT_PACKAGE$]) ++m4trace:configure.ac:48: -1- AM_GLIB_GNU_GETTEXT ++m4trace:configure.ac:48: -1- _m4_warn([obsolete], [The macro `AC_TRY_LINK' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:2414: AC_TRY_LINK is expanded from... ++../../lib/m4sugar/m4sh.m4:516: AS_IF is expanded from... ++../../lib/autoconf/general.m4:1898: AC_CACHE_VAL is expanded from... ++../../lib/autoconf/general.m4:1911: AC_CACHE_CHECK is expanded from... ++/usr/share/aclocal/glib-gettext.m4:48: GLIB_LC_MESSAGES is expanded from... ++/usr/share/aclocal/glib-gettext.m4:312: GLIB_GNU_GETTEXT is expanded from... ++/usr/share/aclocal/glib-gettext.m4:412: AM_GLIB_GNU_GETTEXT is expanded from... ++configure.ac:48: the top level]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^HAVE_LC_MESSAGES$]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^USE_NLS$]) ++m4trace:configure.ac:48: -1- _m4_warn([obsolete], [The macro `AC_TRY_LINK' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:2414: AC_TRY_LINK is expanded from... ++../../lib/m4sugar/m4sh.m4:516: AS_IF is expanded from... ++../../lib/autoconf/general.m4:1898: AC_CACHE_VAL is expanded from... ++../../lib/autoconf/general.m4:1911: AC_CACHE_CHECK is expanded from... ++../../lib/m4sugar/m4sh.m4:516: AS_IF is expanded from... ++../../lib/autoconf/headers.m4:87: AC_CHECK_HEADER is expanded from... ++/usr/share/aclocal/glib-gettext.m4:102: GLIB_WITH_NLS is expanded from... ++/usr/share/aclocal/glib-gettext.m4:312: GLIB_GNU_GETTEXT is expanded from... ++/usr/share/aclocal/glib-gettext.m4:412: AM_GLIB_GNU_GETTEXT is expanded from... ++configure.ac:48: the top level]) ++m4trace:configure.ac:48: -1- _m4_warn([obsolete], [The macro `AC_TRY_LINK' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:2414: AC_TRY_LINK is expanded from... ++../../lib/m4sugar/m4sh.m4:516: AS_IF is expanded from... ++../../lib/autoconf/general.m4:1898: AC_CACHE_VAL is expanded from... ++../../lib/autoconf/general.m4:1911: AC_CACHE_CHECK is expanded from... ++../../lib/m4sugar/m4sh.m4:516: AS_IF is expanded from... ++../../lib/autoconf/headers.m4:87: AC_CHECK_HEADER is expanded from... ++/usr/share/aclocal/glib-gettext.m4:102: GLIB_WITH_NLS is expanded from... ++/usr/share/aclocal/glib-gettext.m4:312: GLIB_GNU_GETTEXT is expanded from... ++/usr/share/aclocal/glib-gettext.m4:412: AM_GLIB_GNU_GETTEXT is expanded from... ++configure.ac:48: the top level]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^HAVE_GETTEXT$]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^MSGFMT$]) ++m4trace:configure.ac:48: -1- GLIB_RUN_PROG([$MSGFMT -c -o /dev/null], [ ++msgid "" ++msgstr "" ++"Content-Type: text/plain; charset=UTF-8\n" ++"Project-Id-Version: test 1.0\n" ++"PO-Revision-Date: 2007-02-15 12:01+0100\n" ++"Last-Translator: test \n" ++"Language-Team: C \n" ++"MIME-Version: 1.0\n" ++"Content-Transfer-Encoding: 8bit\n" ++], [MSGFMT_OPTS=-c; AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no])]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^MSGFMT_OPTS$]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^GMSGFMT$]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^XGETTEXT$]) ++m4trace:configure.ac:48: -1- _m4_warn([obsolete], [The macro `AC_TRY_LINK' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:2414: AC_TRY_LINK is expanded from... ++../../lib/m4sugar/m4sh.m4:516: AS_IF is expanded from... ++../../lib/autoconf/headers.m4:87: AC_CHECK_HEADER is expanded from... ++/usr/share/aclocal/glib-gettext.m4:102: GLIB_WITH_NLS is expanded from... ++/usr/share/aclocal/glib-gettext.m4:312: GLIB_GNU_GETTEXT is expanded from... ++/usr/share/aclocal/glib-gettext.m4:412: AM_GLIB_GNU_GETTEXT is expanded from... ++configure.ac:48: the top level]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^ENABLE_NLS$]) ++m4trace:configure.ac:48: -1- _m4_warn([obsolete], [The macro `AC_OUTPUT_COMMANDS' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/status.m4:848: AC_OUTPUT_COMMANDS is expanded from... ++/usr/share/aclocal/glib-gettext.m4:102: GLIB_WITH_NLS is expanded from... ++/usr/share/aclocal/glib-gettext.m4:312: GLIB_GNU_GETTEXT is expanded from... ++/usr/share/aclocal/glib-gettext.m4:412: AM_GLIB_GNU_GETTEXT is expanded from... ++configure.ac:48: the top level]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^CATALOGS$]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^CATOBJEXT$]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^DATADIRNAME$]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^GMOFILES$]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^INSTOBJEXT$]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^INTLLIBS$]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^PO_IN_DATADIR_TRUE$]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^PO_IN_DATADIR_FALSE$]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^POFILES$]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^POSUB$]) ++m4trace:configure.ac:48: -1- m4_pattern_allow([^MKINSTALLDIRS$]) ++m4trace:configure.ac:74: -1- m4_pattern_allow([^GLIB_REQUIRED$]) ++m4trace:configure.ac:75: -1- m4_pattern_allow([^GTK_REQUIRED$]) ++m4trace:configure.ac:76: -1- m4_pattern_allow([^GDK_REQUIRED$]) ++m4trace:configure.ac:77: -1- m4_pattern_allow([^LIBGNOME_REQUIRED$]) ++m4trace:configure.ac:78: -1- m4_pattern_allow([^LIBGNOMEUI_REQUIRED$]) ++m4trace:configure.ac:79: -1- m4_pattern_allow([^HAL_REQUIRED$]) ++m4trace:configure.ac:80: -1- m4_pattern_allow([^DBUS_REQUIRED$]) ++m4trace:configure.ac:81: -1- m4_pattern_allow([^LIBGLADE_REQUIRED$]) ++m4trace:configure.ac:82: -1- m4_pattern_allow([^LIBNOTIFY_REQUIRED$]) ++m4trace:configure.ac:83: -1- m4_pattern_allow([^LIBWNCK_REQUIRED$]) ++m4trace:configure.ac:84: -1- m4_pattern_allow([^CAIRO_REQUIRED$]) ++m4trace:configure.ac:85: -1- m4_pattern_allow([^UNIQUE_REQUIRED$]) ++m4trace:configure.ac:86: -1- m4_pattern_allow([^LIBPANEL_REQUIRED$]) ++m4trace:configure.ac:87: -1- m4_pattern_allow([^GSTREAMER_REQUIRED$]) ++m4trace:configure.ac:88: -1- m4_pattern_allow([^XRANDR_REQUIRED$]) ++m4trace:configure.ac:89: -1- m4_pattern_allow([^POLKIT_GNOME_REQUIRED$]) ++m4trace:configure.ac:94: -1- PKG_CHECK_MODULES([GLIB], [glib-2.0 >= $GLIB_REQUIRED gobject-2.0]) ++m4trace:configure.ac:94: -1- m4_pattern_allow([^GLIB_CFLAGS$]) ++m4trace:configure.ac:94: -1- m4_pattern_allow([^GLIB_LIBS$]) ++m4trace:configure.ac:94: -1- PKG_CHECK_EXISTS([glib-2.0 >= $GLIB_REQUIRED gobject-2.0], [pkg_cv_[]GLIB_CFLAGS=`$PKG_CONFIG --[]cflags "glib-2.0 >= $GLIB_REQUIRED gobject-2.0" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:94: -1- PKG_CHECK_EXISTS([glib-2.0 >= $GLIB_REQUIRED gobject-2.0], [pkg_cv_[]GLIB_LIBS=`$PKG_CONFIG --[]libs "glib-2.0 >= $GLIB_REQUIRED gobject-2.0" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:94: -1- _PKG_SHORT_ERRORS_SUPPORTED ++m4trace:configure.ac:95: -1- m4_pattern_allow([^GLIB_CFLAGS$]) ++m4trace:configure.ac:96: -1- m4_pattern_allow([^GLIB_LIBS$]) ++m4trace:configure.ac:98: -1- PKG_CHECK_MODULES([HAL], [hal >= $HAL_REQUIRED]) ++m4trace:configure.ac:98: -1- m4_pattern_allow([^HAL_CFLAGS$]) ++m4trace:configure.ac:98: -1- m4_pattern_allow([^HAL_LIBS$]) ++m4trace:configure.ac:98: -1- PKG_CHECK_EXISTS([hal >= $HAL_REQUIRED], [pkg_cv_[]HAL_CFLAGS=`$PKG_CONFIG --[]cflags "hal >= $HAL_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:98: -1- PKG_CHECK_EXISTS([hal >= $HAL_REQUIRED], [pkg_cv_[]HAL_LIBS=`$PKG_CONFIG --[]libs "hal >= $HAL_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:98: -1- _PKG_SHORT_ERRORS_SUPPORTED ++m4trace:configure.ac:99: -1- m4_pattern_allow([^HAL_CFLAGS$]) ++m4trace:configure.ac:100: -1- m4_pattern_allow([^HAL_LIBS$]) ++m4trace:configure.ac:102: -1- PKG_CHECK_MODULES([GSTREAMER], [gstreamer-0.10 >= $GSTREAMER_REQUIRED]) ++m4trace:configure.ac:102: -1- m4_pattern_allow([^GSTREAMER_CFLAGS$]) ++m4trace:configure.ac:102: -1- m4_pattern_allow([^GSTREAMER_LIBS$]) ++m4trace:configure.ac:102: -1- PKG_CHECK_EXISTS([gstreamer-0.10 >= $GSTREAMER_REQUIRED], [pkg_cv_[]GSTREAMER_CFLAGS=`$PKG_CONFIG --[]cflags "gstreamer-0.10 >= $GSTREAMER_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:102: -1- PKG_CHECK_EXISTS([gstreamer-0.10 >= $GSTREAMER_REQUIRED], [pkg_cv_[]GSTREAMER_LIBS=`$PKG_CONFIG --[]libs "gstreamer-0.10 >= $GSTREAMER_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:102: -1- _PKG_SHORT_ERRORS_SUPPORTED ++m4trace:configure.ac:103: -1- m4_pattern_allow([^GSTREAMER_CFLAGS$]) ++m4trace:configure.ac:104: -1- m4_pattern_allow([^GSTREAMER_LIBS$]) ++m4trace:configure.ac:106: -1- PKG_CHECK_MODULES([DBUS], [ ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0]) ++m4trace:configure.ac:106: -1- m4_pattern_allow([^DBUS_CFLAGS$]) ++m4trace:configure.ac:106: -1- m4_pattern_allow([^DBUS_LIBS$]) ++m4trace:configure.ac:106: -1- PKG_CHECK_EXISTS([ ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0], [pkg_cv_[]DBUS_CFLAGS=`$PKG_CONFIG --[]cflags " ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:106: -1- PKG_CHECK_EXISTS([ ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0], [pkg_cv_[]DBUS_LIBS=`$PKG_CONFIG --[]libs " ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:106: -1- _PKG_SHORT_ERRORS_SUPPORTED ++m4trace:configure.ac:110: -1- m4_pattern_allow([^DBUS_CFLAGS$]) ++m4trace:configure.ac:111: -1- m4_pattern_allow([^DBUS_LIBS$]) ++m4trace:configure.ac:113: -1- PKG_CHECK_MODULES([GNOME], [ ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED]) ++m4trace:configure.ac:113: -1- m4_pattern_allow([^GNOME_CFLAGS$]) ++m4trace:configure.ac:113: -1- m4_pattern_allow([^GNOME_LIBS$]) ++m4trace:configure.ac:113: -1- PKG_CHECK_EXISTS([ ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED], [pkg_cv_[]GNOME_CFLAGS=`$PKG_CONFIG --[]cflags " ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:113: -1- PKG_CHECK_EXISTS([ ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED], [pkg_cv_[]GNOME_LIBS=`$PKG_CONFIG --[]libs " ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:113: -1- _PKG_SHORT_ERRORS_SUPPORTED ++m4trace:configure.ac:121: -1- m4_pattern_allow([^GNOME_CFLAGS$]) ++m4trace:configure.ac:122: -1- m4_pattern_allow([^GNOME_LIBS$]) ++m4trace:configure.ac:124: -1- PKG_CHECK_MODULES([GDK], [ ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED]) ++m4trace:configure.ac:124: -1- m4_pattern_allow([^GDK_CFLAGS$]) ++m4trace:configure.ac:124: -1- m4_pattern_allow([^GDK_LIBS$]) ++m4trace:configure.ac:124: -1- PKG_CHECK_EXISTS([ ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED], [pkg_cv_[]GDK_CFLAGS=`$PKG_CONFIG --[]cflags " ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:124: -1- PKG_CHECK_EXISTS([ ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED], [pkg_cv_[]GDK_LIBS=`$PKG_CONFIG --[]libs " ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:124: -1- _PKG_SHORT_ERRORS_SUPPORTED ++m4trace:configure.ac:127: -1- m4_pattern_allow([^GDK_CFLAGS$]) ++m4trace:configure.ac:128: -1- m4_pattern_allow([^GDK_LIBS$]) ++m4trace:configure.ac:130: -1- PKG_CHECK_MODULES([XRANDR], [ ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11]) ++m4trace:configure.ac:130: -1- m4_pattern_allow([^XRANDR_CFLAGS$]) ++m4trace:configure.ac:130: -1- m4_pattern_allow([^XRANDR_LIBS$]) ++m4trace:configure.ac:130: -1- PKG_CHECK_EXISTS([ ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11], [pkg_cv_[]XRANDR_CFLAGS=`$PKG_CONFIG --[]cflags " ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:130: -1- PKG_CHECK_EXISTS([ ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11], [pkg_cv_[]XRANDR_LIBS=`$PKG_CONFIG --[]libs " ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:130: -1- _PKG_SHORT_ERRORS_SUPPORTED ++m4trace:configure.ac:133: -1- m4_pattern_allow([^XRANDR_CFLAGS$]) ++m4trace:configure.ac:134: -1- m4_pattern_allow([^XRANDR_LIBS$]) ++m4trace:configure.ac:136: -1- m4_pattern_allow([^GCONFTOOL$]) ++m4trace:configure.ac:137: -1- AM_GCONF_SOURCE_2 ++m4trace:configure.ac:137: -2- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from... ++/usr/share/aclocal/gconf-2.m4:8: AM_GCONF_SOURCE_2 is expanded from... ++configure.ac:137: the top level]) ++m4trace:configure.ac:137: -1- m4_pattern_allow([^GCONF_SCHEMA_CONFIG_SOURCE$]) ++m4trace:configure.ac:137: -2- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from... ++/usr/share/aclocal/gconf-2.m4:8: AM_GCONF_SOURCE_2 is expanded from... ++configure.ac:137: the top level]) ++m4trace:configure.ac:137: -1- m4_pattern_allow([^GCONF_SCHEMA_FILE_DIR$]) ++m4trace:configure.ac:137: -1- AM_CONDITIONAL([GCONF_SCHEMAS_INSTALL], [test "$enable_schemas_install" != no]) ++m4trace:configure.ac:137: -1- m4_pattern_allow([^GCONF_SCHEMAS_INSTALL_TRUE$]) ++m4trace:configure.ac:137: -1- m4_pattern_allow([^GCONF_SCHEMAS_INSTALL_FALSE$]) ++m4trace:configure.ac:139: -1- m4_pattern_allow([^XMKMF$]) ++m4trace:configure.ac:139: -1- m4_pattern_allow([^X_DISPLAY_MISSING$]) ++m4trace:configure.ac:139: -1- m4_pattern_allow([^X_CFLAGS$]) ++m4trace:configure.ac:139: -1- m4_pattern_allow([^X_PRE_LIBS$]) ++m4trace:configure.ac:139: -1- m4_pattern_allow([^X_LIBS$]) ++m4trace:configure.ac:139: -1- m4_pattern_allow([^X_EXTRA_LIBS$]) ++m4trace:configure.ac:146: -1- m4_pattern_allow([^SYSCONFDIR$]) ++m4trace:configure.ac:147: -1- m4_pattern_allow([^DATADIR$]) ++m4trace:configure.ac:148: -1- m4_pattern_allow([^BINDIR$]) ++m4trace:configure.ac:149: -1- m4_pattern_allow([^SBINDIR$]) ++m4trace:configure.ac:163: -1- m4_pattern_allow([^DOCDIR$]) ++m4trace:configure.ac:176: -1- PKG_CHECK_MODULES([POLKIT], [\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED]) ++m4trace:configure.ac:176: -1- m4_pattern_allow([^POLKIT_CFLAGS$]) ++m4trace:configure.ac:176: -1- m4_pattern_allow([^POLKIT_LIBS$]) ++m4trace:configure.ac:176: -1- PKG_CHECK_EXISTS([\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED], [pkg_cv_[]POLKIT_CFLAGS=`$PKG_CONFIG --[]cflags "\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:176: -1- PKG_CHECK_EXISTS([\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED], [pkg_cv_[]POLKIT_LIBS=`$PKG_CONFIG --[]libs "\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:176: -1- _PKG_SHORT_ERRORS_SUPPORTED ++m4trace:configure.ac:179: -1- m4_pattern_allow([^POLKIT_CFLAGS$]) ++m4trace:configure.ac:180: -1- m4_pattern_allow([^POLKIT_LIBS$]) ++m4trace:configure.ac:182: -1- m4_pattern_allow([^HAVE_POLKIT$]) ++m4trace:configure.ac:200: -1- m4_pattern_allow([^HAVE_CHECK_FG$]) ++m4trace:configure.ac:218: -1- m4_pattern_allow([^HAVE_XEVENTS$]) ++m4trace:configure.ac:236: -1- m4_pattern_allow([^HAVE_TESTS$]) ++m4trace:configure.ac:241: -1- AM_CONDITIONAL([HAVE_TESTS], [test $have_tests = yes]) ++m4trace:configure.ac:241: -1- m4_pattern_allow([^HAVE_TESTS_TRUE$]) ++m4trace:configure.ac:241: -1- m4_pattern_allow([^HAVE_TESTS_FALSE$]) ++m4trace:configure.ac:254: -1- PKG_CHECK_MODULES([POLKIT_GNOME], [ ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED]) ++m4trace:configure.ac:254: -1- m4_pattern_allow([^POLKIT_GNOME_CFLAGS$]) ++m4trace:configure.ac:254: -1- m4_pattern_allow([^POLKIT_GNOME_LIBS$]) ++m4trace:configure.ac:254: -1- PKG_CHECK_EXISTS([ ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED], [pkg_cv_[]POLKIT_GNOME_CFLAGS=`$PKG_CONFIG --[]cflags " ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:254: -1- PKG_CHECK_EXISTS([ ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED], [pkg_cv_[]POLKIT_GNOME_LIBS=`$PKG_CONFIG --[]libs " ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:254: -1- _PKG_SHORT_ERRORS_SUPPORTED ++m4trace:configure.ac:256: -1- m4_pattern_allow([^POLKIT_GNOME_CFLAGS$]) ++m4trace:configure.ac:257: -1- m4_pattern_allow([^POLKIT_GNOME_LIBS$]) ++m4trace:configure.ac:259: -1- m4_pattern_allow([^HAVE_GCONF_DEFAULTS$]) ++m4trace:configure.ac:264: -1- AM_CONDITIONAL([HAVE_GCONF_DEFAULTS], [test $have_gconfdefaults = yes]) ++m4trace:configure.ac:264: -1- m4_pattern_allow([^HAVE_GCONF_DEFAULTS_TRUE$]) ++m4trace:configure.ac:264: -1- m4_pattern_allow([^HAVE_GCONF_DEFAULTS_FALSE$]) ++m4trace:configure.ac:278: -1- m4_pattern_allow([^HAVE_APPLETS$]) ++m4trace:configure.ac:283: -1- AM_CONDITIONAL([HAVE_APPLETS], [test $have_applets = yes]) ++m4trace:configure.ac:283: -1- m4_pattern_allow([^HAVE_APPLETS_TRUE$]) ++m4trace:configure.ac:283: -1- m4_pattern_allow([^HAVE_APPLETS_FALSE$]) ++m4trace:configure.ac:293: -1- m4_pattern_allow([^XMLTO$]) ++m4trace:configure.ac:312: -1- AM_CONDITIONAL([DOCBOOK_DOCS_ENABLED], [test x$enable_docbook_docs = xyes]) ++m4trace:configure.ac:312: -1- m4_pattern_allow([^DOCBOOK_DOCS_ENABLED_TRUE$]) ++m4trace:configure.ac:312: -1- m4_pattern_allow([^DOCBOOK_DOCS_ENABLED_FALSE$]) ++m4trace:configure.ac:328: -1- m4_pattern_allow([^DBUS_SERVICES_DIR$]) ++m4trace:configure.ac:335: -1- PKG_CHECK_MODULES([LIBNOTIFY], [libnotify >= $LIBNOTIFY_REQUIRED]) ++m4trace:configure.ac:335: -1- m4_pattern_allow([^LIBNOTIFY_CFLAGS$]) ++m4trace:configure.ac:335: -1- m4_pattern_allow([^LIBNOTIFY_LIBS$]) ++m4trace:configure.ac:335: -1- PKG_CHECK_EXISTS([libnotify >= $LIBNOTIFY_REQUIRED], [pkg_cv_[]LIBNOTIFY_CFLAGS=`$PKG_CONFIG --[]cflags "libnotify >= $LIBNOTIFY_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:335: -1- PKG_CHECK_EXISTS([libnotify >= $LIBNOTIFY_REQUIRED], [pkg_cv_[]LIBNOTIFY_LIBS=`$PKG_CONFIG --[]libs "libnotify >= $LIBNOTIFY_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:335: -1- _PKG_SHORT_ERRORS_SUPPORTED ++m4trace:configure.ac:336: -1- m4_pattern_allow([^LIBNOTIFY_CFLAGS$]) ++m4trace:configure.ac:337: -1- m4_pattern_allow([^LIBNOTIFY_LIBS$]) ++m4trace:configure.ac:338: -1- m4_pattern_allow([^HAVE_LIBNOTIFY$]) ++m4trace:configure.ac:342: -1- AM_CONDITIONAL([HAVE_LIBNOTIFY], [test $have_libnotify = yes]) ++m4trace:configure.ac:342: -1- m4_pattern_allow([^HAVE_LIBNOTIFY_TRUE$]) ++m4trace:configure.ac:342: -1- m4_pattern_allow([^HAVE_LIBNOTIFY_FALSE$]) ++m4trace:configure.ac:349: -1- PKG_CHECK_MODULES([UNIQUE], [unique-1.0 >= $UNIQUE_REQUIRED]) ++m4trace:configure.ac:349: -1- m4_pattern_allow([^UNIQUE_CFLAGS$]) ++m4trace:configure.ac:349: -1- m4_pattern_allow([^UNIQUE_LIBS$]) ++m4trace:configure.ac:349: -1- PKG_CHECK_EXISTS([unique-1.0 >= $UNIQUE_REQUIRED], [pkg_cv_[]UNIQUE_CFLAGS=`$PKG_CONFIG --[]cflags "unique-1.0 >= $UNIQUE_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:349: -1- PKG_CHECK_EXISTS([unique-1.0 >= $UNIQUE_REQUIRED], [pkg_cv_[]UNIQUE_LIBS=`$PKG_CONFIG --[]libs "unique-1.0 >= $UNIQUE_REQUIRED" 2>/dev/null`], [pkg_failed=yes]) ++m4trace:configure.ac:349: -1- _PKG_SHORT_ERRORS_SUPPORTED ++m4trace:configure.ac:350: -1- m4_pattern_allow([^UNIQUE_CFLAGS$]) ++m4trace:configure.ac:351: -1- m4_pattern_allow([^UNIQUE_LIBS$]) ++m4trace:configure.ac:352: -1- m4_pattern_allow([^HAVE_UNIQUE$]) ++m4trace:configure.ac:355: -1- m4_pattern_allow([^HAVE_UNIQUE$]) ++m4trace:configure.ac:357: -1- AM_CONDITIONAL([HAVE_UNIQUE], [test $have_unique = yes]) ++m4trace:configure.ac:357: -1- m4_pattern_allow([^HAVE_UNIQUE_TRUE$]) ++m4trace:configure.ac:357: -1- m4_pattern_allow([^HAVE_UNIQUE_FALSE$]) ++m4trace:configure.ac:365: -1- AC_DEFUN([AC_CHECK_X_HEADER], [ ++ ac_save_CPPFLAGS="$CPPFLAGS" ++ if test \! -z "$includedir" ; then ++ CPPFLAGS="$CPPFLAGS -I$includedir" ++ fi ++ CPPFLAGS="$CPPFLAGS $X_CFLAGS" ++ AC_CHECK_HEADER([$1],[$2],[$3],[$4]) ++ CPPFLAGS="$ac_save_CPPFLAGS"]) ++m4trace:configure.ac:376: -1- AC_DEFUN([AC_TRY_X_COMPILE], [ ++ ac_save_CPPFLAGS="$CPPFLAGS" ++ if test \! -z "$includedir" ; then ++ CPPFLAGS="$CPPFLAGS -I$includedir" ++ fi ++ CPPFLAGS="$CPPFLAGS $X_CFLAGS" ++ AC_TRY_COMPILE([$1], [$2], [$3], [$4]) ++ CPPFLAGS="$ac_save_CPPFLAGS"]) ++m4trace:configure.ac:389: -1- AC_DEFUN([AC_CHECK_X_LIB], [ ++ ac_save_CPPFLAGS="$CPPFLAGS" ++ ac_save_LDFLAGS="$LDFLAGS" ++# ac_save_LIBS="$LIBS" ++ ++ if test \! -z "$includedir" ; then ++ CPPFLAGS="$CPPFLAGS -I$includedir" ++ fi ++ # note: $X_CFLAGS includes $x_includes ++ CPPFLAGS="$CPPFLAGS $X_CFLAGS" ++ ++ if test \! -z "$libdir" ; then ++ LDFLAGS="$LDFLAGS -L$libdir" ++ fi ++ # note: $X_LIBS includes $x_libraries ++ LDFLAGS="$LDFLAGS $ALL_X_LIBS" ++ ++ AC_CHECK_LIB([$1], [$2], [$3], [$4], [$5]) ++ CPPFLAGS="$ac_save_CPPFLAGS" ++ LDFLAGS="$ac_save_LDFLAGS" ++# LIBS="$ac_save_LIBS" ++ ]) ++m4trace:configure.ac:428: -1- AC_DEFUN([HANDLE_X_PATH_ARG], [ ++ case "$[$1]" in ++ yes) ;; ++ no) ;; ++ ++ /*) ++ AC_MSG_CHECKING([for [$3] headers]) ++ d=$[$1]/include ++ if test -d $d; then ++ X_CFLAGS="-I$d $X_CFLAGS" ++ AC_MSG_RESULT($d) ++ else ++ AC_MSG_RESULT(not found ($d: no such directory)) ++ fi ++ ++ AC_MSG_CHECKING([for [$3] libs]) ++ d=$[$1]/lib ++ if test -d $d; then ++ X_LIBS="-L$d $X_LIBS" ++ AC_MSG_RESULT($d) ++ else ++ AC_MSG_RESULT(not found ($d: no such directory)) ++ fi ++ ++ # replace the directory string with "yes". ++ [$1]_req="yes" ++ [$1]=$[$1]_req ++ ;; ++ ++ *) ++ echo "" ++ echo "error: argument to [$2] must be \"yes\", \"no\", or a directory." ++ echo " If it is a directory, then \`DIR/include' will be added to" ++ echo " the -I list, and \`DIR/lib' will be added to the -L list." ++ exit 1 ++ ;; ++ esac ++ ]) ++m4trace:configure.ac:481: -1- HANDLE_X_PATH_ARG([with_dpms], [--with-dpms-ext], [DPMS]) ++m4trace:configure.ac:486: -1- AC_CHECK_X_HEADER([X11/extensions/dpms.h], [have_dpms=yes], [], [#include ++ #include ]) ++m4trace:configure.ac:495: -1- AC_CHECK_X_LIB([Xext], [DPMSInfo], [have_dpms=yes], [true], [-lXext -lX11]) ++m4trace:configure.ac:499: -1- AC_CHECK_X_LIB([Xdpms], [DPMSInfo], [have_dpms=yes; XDPMS_LIBS="-lXdpms"], [true], [-lXext -lX11]) ++m4trace:configure.ac:508: -1- m4_pattern_allow([^HAVE_DPMS_EXTENSION$]) ++m4trace:configure.ac:521: -1- m4_pattern_allow([^HAVE_KSTAT$]) ++m4trace:configure.ac:526: -1- m4_pattern_allow([^GPM_EXTRA_LIBS$]) ++m4trace:configure.ac:531: -1- m4_pattern_allow([^DOCBOOK2MAN$]) ++m4trace:configure.ac:535: -1- AM_CONDITIONAL([HAVE_DOCBOOK2MAN], [test "$DOCBOOK2MAN" != "no"]) ++m4trace:configure.ac:535: -1- m4_pattern_allow([^HAVE_DOCBOOK2MAN_TRUE$]) ++m4trace:configure.ac:535: -1- m4_pattern_allow([^HAVE_DOCBOOK2MAN_FALSE$]) ++m4trace:configure.ac:566: -1- _m4_warn([obsolete], [The macro `AC_TRY_COMPILE' is obsolete. ++You should run autoupdate.], [../../lib/autoconf/general.m4:2367: AC_TRY_COMPILE is expanded from... ++configure.ac:566: the top level]) ++m4trace:configure.ac:629: -1- m4_pattern_allow([^LIB@&t@OBJS$]) ++m4trace:configure.ac:629: -1- m4_pattern_allow([^LTLIBOBJS$]) ++m4trace:configure.ac:629: -1- _AC_AM_CONFIG_HEADER_HOOK([$ac_file]) ++m4trace:configure.ac:629: -1- _AM_OUTPUT_DEPENDENCY_COMMANDS ++m4trace:configure.ac:629: -1- _LT_PROG_LTMAIN +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/config.h.in gnome-power-manager-2.24.0.new/config.h.in +--- gnome-power-manager-2.24.0/config.h.in 2008-09-22 22:46:10.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/config.h.in 2008-11-20 18:37:24.000000000 +0100 +@@ -81,6 +81,10 @@ + /* Define if we use XEVENTS */ + #undef HAVE_XEVENTS + ++/* Define to the sub-directory in which libtool stores uninstalled libraries. ++ */ ++#undef LT_OBJDIR ++ + /* Define to 1 if your C compiler doesn't accept -c and -o together. */ + #undef NO_MINUS_C_MINUS_O + +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/configure gnome-power-manager-2.24.0.new/configure +--- gnome-power-manager-2.24.0/configure 2008-09-22 22:46:09.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/configure 2008-11-20 18:37:23.000000000 +0100 +@@ -553,22 +553,22 @@ + # Check that we are running under the correct shell. + SHELL=${CONFIG_SHELL-/bin/sh} + +-case X$ECHO in ++case X$lt_ECHO in + X*--fallback-echo) + # Remove one level of quotation (which was required for Make). +- ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` ++ ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','` + ;; + esac + +-echo=${ECHO-echo} ++ECHO=${lt_ECHO-echo} + if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift + elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then +- # Yippee, $echo works! ++elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then ++ # Yippee, $ECHO works! + : + else + # Restart under the correct shell. +@@ -578,9 +578,9 @@ + if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift +- cat </dev/null 2>&1 && unset CDPATH + +-if test -z "$ECHO"; then +-if test "X${echo_test_string+set}" != Xset; then +-# find a string as large as possible, as long as the shell can cope with it +- for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do +- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... +- if (echo_test_string=`eval $cmd`) 2>/dev/null && +- echo_test_string=`eval $cmd` && +- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null +- then +- break +- fi +- done +-fi ++if test -z "$lt_ECHO"; then ++ if test "X${echo_test_string+set}" != Xset; then ++ # find a string as large as possible, as long as the shell can cope with it ++ for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do ++ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... ++ if { echo_test_string=`eval $cmd`; } 2>/dev/null && ++ { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null ++ then ++ break ++ fi ++ done ++ fi + +-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && +- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- : +-else +- # The Solaris, AIX, and Digital Unix default echo programs unquote +- # backslashes. This makes it impossible to quote backslashes using +- # echo "$something" | sed 's/\\/\\\\/g' +- # +- # So, first we look for a working echo in the user's PATH. ++ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ : ++ else ++ # The Solaris, AIX, and Digital Unix default echo programs unquote ++ # backslashes. This makes it impossible to quote backslashes using ++ # echo "$something" | sed 's/\\/\\\\/g' ++ # ++ # So, first we look for a working echo in the user's PATH. + +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +- for dir in $PATH /usr/ucb; do ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for dir in $PATH /usr/ucb; do ++ IFS="$lt_save_ifs" ++ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && ++ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ ECHO="$dir/echo" ++ break ++ fi ++ done + IFS="$lt_save_ifs" +- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && +- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && +- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- echo="$dir/echo" +- break +- fi +- done +- IFS="$lt_save_ifs" + +- if test "X$echo" = Xecho; then +- # We didn't find a better echo, so look for alternatives. +- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && +- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- # This shell has a builtin print -r that does the trick. +- echo='print -r' +- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && +- test "X$CONFIG_SHELL" != X/bin/ksh; then +- # If we have ksh, try running configure again with it. +- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} +- export ORIGINAL_CONFIG_SHELL +- CONFIG_SHELL=/bin/ksh +- export CONFIG_SHELL +- exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} +- else +- # Try using printf. +- echo='printf %s\n' +- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && +- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- # Cool, printf works +- : +- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && +- test "X$echo_testing_string" = 'X\t' && +- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && ++ if test "X$ECHO" = Xecho; then ++ # We didn't find a better echo, so look for alternatives. ++ if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ # This shell has a builtin print -r that does the trick. ++ ECHO='print -r' ++ elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && ++ test "X$CONFIG_SHELL" != X/bin/ksh; then ++ # If we have ksh, try running configure again with it. ++ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} ++ export ORIGINAL_CONFIG_SHELL ++ CONFIG_SHELL=/bin/ksh ++ export CONFIG_SHELL ++ exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} ++ else ++ # Try using printf. ++ ECHO='printf %s\n' ++ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then +- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL +- export CONFIG_SHELL +- SHELL="$CONFIG_SHELL" +- export SHELL +- echo="$CONFIG_SHELL $0 --fallback-echo" +- elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && +- test "X$echo_testing_string" = 'X\t' && +- echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- echo="$CONFIG_SHELL $0 --fallback-echo" +- else +- # maybe with a smaller string... +- prev=: ++ # Cool, printf works ++ : ++ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && ++ test "X$echo_testing_string" = 'X\t' && ++ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL ++ export CONFIG_SHELL ++ SHELL="$CONFIG_SHELL" ++ export SHELL ++ ECHO="$CONFIG_SHELL $0 --fallback-echo" ++ elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && ++ test "X$echo_testing_string" = 'X\t' && ++ echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ ECHO="$CONFIG_SHELL $0 --fallback-echo" ++ else ++ # maybe with a smaller string... ++ prev=: + +- for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do +- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null +- then +- break +- fi +- prev="$cmd" +- done ++ for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do ++ if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null ++ then ++ break ++ fi ++ prev="$cmd" ++ done + +- if test "$prev" != 'sed 50q "$0"'; then +- echo_test_string=`eval $prev` +- export echo_test_string +- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} +- else +- # Oops. We lost completely, so just stick with echo. +- echo=echo +- fi ++ if test "$prev" != 'sed 50q "$0"'; then ++ echo_test_string=`eval $prev` ++ export echo_test_string ++ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} ++ else ++ # Oops. We lost completely, so just stick with echo. ++ ECHO=echo ++ fi ++ fi + fi + fi + fi + fi +-fi + + # Copy echo and quote the copy suitably for passing to libtool from + # the Makefile, instead of quoting the original, which is used later. +-ECHO=$echo +-if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then +- ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" ++lt_ECHO=$ECHO ++if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then ++ lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" + fi + + + + +-tagnames=${tagnames+${tagnames},}CXX +- +-tagnames=${tagnames+${tagnames},}F77 +- + exec 7<&0 &1 + + # Name of the host. +@@ -807,7 +802,6 @@ + INSTALL_PROGRAM + INSTALL_SCRIPT + INSTALL_DATA +-am__isrc + CYGPATH_W + PACKAGE + VERSION +@@ -842,6 +836,7 @@ + CCDEPMODE + am__fastdepCC_TRUE + am__fastdepCC_FALSE ++LIBTOOL + build + build_cpu + build_vendor +@@ -853,22 +848,21 @@ + SED + GREP + EGREP ++FGREP ++LD ++DUMPBIN ++ac_ct_DUMPBIN ++NM + LN_S +-ECHO + AR + RANLIB ++lt_ECHO ++DSYMUTIL ++NMEDIT ++LIPO ++OTOOL ++OTOOL64 + CPP +-CXX +-CXXFLAGS +-ac_ct_CXX +-CXXDEPMODE +-am__fastdepCXX_TRUE +-am__fastdepCXX_FALSE +-CXXCPP +-F77 +-FFLAGS +-ac_ct_F77 +-LIBTOOL + INTLTOOL_DESKTOP_RULE + INTLTOOL_DIRECTORY_RULE + INTLTOOL_KEYS_RULE +@@ -1005,12 +999,6 @@ + LIBS + CPPFLAGS + CPP +-CXX +-CXXFLAGS +-CCC +-CXXCPP +-F77 +-FFLAGS + PKG_CONFIG + GLIB_CFLAGS + GLIB_LIBS +@@ -1644,16 +1632,17 @@ + Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) +- --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-pic try to use only PIC/non-PIC objects [default=use + both] +- --with-tags[=TAGS] include additional configurations [automatic] ++ --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-help-dir=DIR path to help docs + --with-omf-dir=DIR path to OMF files + --with-help-formats=FORMATS + list of formats +- --with-gconf-source=sourceaddress Config database for installing schema files. +- --with-gconf-schema-file-dir=dir Directory for installing schema files. ++ --with-gconf-source=sourceaddress ++ Config database for installing schema files. ++ --with-gconf-schema-file-dir=dir ++ Directory for installing schema files. + --with-x use the X Window System + --with-doc-dir= directory to install documentation + --with-dbus-services= +@@ -1669,11 +1658,6 @@ + CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if + you have headers in a nonstandard directory + CPP C preprocessor +- CXX C++ compiler command +- CXXFLAGS C++ compiler flags +- CXXCPP C++ preprocessor +- F77 Fortran 77 compiler command +- FFLAGS Fortran 77 compiler flags + PKG_CONFIG path to pkg-config utility + GLIB_CFLAGS C compiler flags for GLIB, overriding pkg-config + GLIB_LIBS linker flags for GLIB, overriding pkg-config +@@ -2140,8 +2124,7 @@ + + + +-am__api_version='1.10' +- ++am__api_version="1.9" + ac_aux_dir= + for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do + if test -f "$ac_dir/install-sh"; then +@@ -2324,53 +2307,38 @@ + echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} + fi + +-{ echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5 +-echo $ECHO_N "checking for a thread-safe mkdir -p... $ECHO_C" >&6; } +-if test -z "$MKDIR_P"; then +- if test "${ac_cv_path_mkdir+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_prog in mkdir gmkdir; do +- for ac_exec_ext in '' $ac_executable_extensions; do +- { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue +- case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( +- 'mkdir (GNU coreutils) '* | \ +- 'mkdir (coreutils) '* | \ +- 'mkdir (fileutils) '4.1*) +- ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext +- break 3;; +- esac +- done +- done +-done +-IFS=$as_save_IFS +- +-fi +- +- if test "${ac_cv_path_mkdir+set}" = set; then +- MKDIR_P="$ac_cv_path_mkdir -p" ++if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then ++ # We used to keeping the `.' as first argument, in order to ++ # allow $(mkdir_p) to be used without argument. As in ++ # $(mkdir_p) $(somedir) ++ # where $(somedir) is conditionally defined. However this is wrong ++ # for two reasons: ++ # 1. if the package is installed by a user who cannot write `.' ++ # make install will fail, ++ # 2. the above comment should most certainly read ++ # $(mkdir_p) $(DESTDIR)$(somedir) ++ # so it does not work when $(somedir) is undefined and ++ # $(DESTDIR) is not. ++ # To support the latter case, we have to write ++ # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), ++ # so the `.' trick is pointless. ++ mkdir_p='mkdir -p --' ++else ++ # On NextStep and OpenStep, the `mkdir' command does not ++ # recognize any option. It will interpret all options as ++ # directories to create, and then abort because `.' already ++ # exists. ++ for d in ./-p ./--version; ++ do ++ test -d $d && rmdir $d ++ done ++ # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. ++ if test -f "$ac_aux_dir/mkinstalldirs"; then ++ mkdir_p='$(mkinstalldirs)' + else +- # As a last resort, use the slow shell script. Don't cache a +- # value for MKDIR_P within a source directory, because that will +- # break other packages using the cache if that directory is +- # removed, or if the value is a relative name. +- test -d ./--version && rmdir ./--version +- MKDIR_P="$ac_install_sh -d" ++ mkdir_p='$(install_sh) -d' + fi + fi +-{ echo "$as_me:$LINENO: result: $MKDIR_P" >&5 +-echo "${ECHO_T}$MKDIR_P" >&6; } +- +-mkdir_p="$MKDIR_P" +-case $mkdir_p in +- [\\/$]* | ?:[\\/]*) ;; +- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +-esac + + for ac_prog in gawk mawk nawk awk + do +@@ -2453,16 +2421,12 @@ + fi + rmdir .tst 2>/dev/null + +-if test "`cd $srcdir && pwd`" != "`pwd`"; then +- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output +- # is not polluted with repeated "-I." +- am__isrc=' -I$(srcdir)' +- # test to see if srcdir already configured +- if test -f $srcdir/config.status; then +- { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 ++# test to see if srcdir already configured ++if test "`cd $srcdir && pwd`" != "`pwd`" && ++ test -f $srcdir/config.status; then ++ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 + echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} + { (exit 1); exit 1; }; } +- fi + fi + + # test whether we have cygpath +@@ -2505,7 +2469,7 @@ + + MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +-install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} ++install_sh=${install_sh-"$am_aux_dir/install-sh"} + + # Installed binaries are usually stripped using `strip' when the user + # run `make install-strip'. However `strip' might not be the right +@@ -2609,7 +2573,7 @@ + fi + + fi +-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" ++INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" + + # We need awk for the "check" target. The system "awk" is bad on + # some platforms. +@@ -3598,7 +3562,9 @@ + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + fi +- if test "x$enable_dependency_tracking" != xno; then ++ ++ ++if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' + else +@@ -3608,6 +3574,7 @@ + + + ++ + depcc="$CC" am_compiler_list= + + { echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +@@ -3675,7 +3642,6 @@ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && +- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then +@@ -3705,7 +3671,9 @@ + echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } + CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + +- if ++ ++ ++if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= +@@ -3842,7 +3810,6 @@ + fi + + +- + # Find a good install program. We prefer a C program (faster), + # so one script is as good as another. But avoid the broken or + # incompatible versions: +@@ -3923,78 +3890,31 @@ + + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +-# Check whether --enable-shared was given. +-if test "${enable_shared+set}" = set; then +- enableval=$enable_shared; p=${PACKAGE-default} +- case $enableval in +- yes) enable_shared=yes ;; +- no) enable_shared=no ;; +- *) +- enable_shared=no +- # Look at the argument we got. We use all the common list separators. +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for pkg in $enableval; do +- IFS="$lt_save_ifs" +- if test "X$pkg" = "X$p"; then +- enable_shared=yes +- fi +- done +- IFS="$lt_save_ifs" +- ;; +- esac +-else +- enable_shared=yes +-fi ++case `pwd` in ++ *\ * | *\ *) ++ { echo "$as_me:$LINENO: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 ++echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; ++esac + + +-# Check whether --enable-static was given. +-if test "${enable_static+set}" = set; then +- enableval=$enable_static; p=${PACKAGE-default} +- case $enableval in +- yes) enable_static=yes ;; +- no) enable_static=no ;; +- *) +- enable_static=no +- # Look at the argument we got. We use all the common list separators. +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for pkg in $enableval; do +- IFS="$lt_save_ifs" +- if test "X$pkg" = "X$p"; then +- enable_static=yes +- fi +- done +- IFS="$lt_save_ifs" +- ;; +- esac +-else +- enable_static=yes +-fi ++ ++macro_version='2.2.4' ++macro_revision='1.2976' ++ + + +-# Check whether --enable-fast-install was given. +-if test "${enable_fast_install+set}" = set; then +- enableval=$enable_fast_install; p=${PACKAGE-default} +- case $enableval in +- yes) enable_fast_install=yes ;; +- no) enable_fast_install=no ;; +- *) +- enable_fast_install=no +- # Look at the argument we got. We use all the common list separators. +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for pkg in $enableval; do +- IFS="$lt_save_ifs" +- if test "X$pkg" = "X$p"; then +- enable_fast_install=yes +- fi +- done +- IFS="$lt_save_ifs" +- ;; +- esac +-else +- enable_fast_install=yes +-fi + + ++ ++ ++ ++ ++ ++ ++ ++ ++ltmain="$ac_aux_dir/ltmain.sh" ++ + # Make sure we can run config.sub. + $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || + { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 +@@ -4080,62 +4000,100 @@ + + { echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 + echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; } +-if test "${lt_cv_path_SED+set}" = set; then ++if test "${ac_cv_path_SED+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ ++ for ac_i in 1 2 3 4 5 6 7; do ++ ac_script="$ac_script$as_nl$ac_script" ++ done ++ echo "$ac_script" | sed 99q >conftest.sed ++ $as_unset ac_script || ac_script= ++ # Extract the first word of "sed gsed" to use in msg output ++if test -z "$SED"; then ++set dummy sed gsed; ac_prog_name=$2 ++if test "${ac_cv_path_SED+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- # Loop through the user's path and test for sed and gsed. +-# Then use that list of sed's as ones to test for truncation. ++ ac_path_SED_found=false ++# Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for lt_ac_prog in sed gsed; do +- for ac_exec_ext in '' $ac_executable_extensions; do +- if { test -f "$as_dir/$lt_ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$lt_ac_prog$ac_exec_ext"; }; then +- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" +- fi +- done +- done +-done +-IFS=$as_save_IFS +-lt_ac_max=0 +-lt_ac_count=0 +-# Add /usr/xpg4/bin/sed as it is typically found on Solaris +-# along with /bin/sed that truncates output. +-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do +- test ! -f $lt_ac_sed && continue +- cat /dev/null > conftest.in +- lt_ac_count=0 +- echo $ECHO_N "0123456789$ECHO_C" >conftest.in +- # Check for GNU sed and select it if it is found. +- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then +- lt_cv_path_SED=$lt_ac_sed +- break +- fi +- while true; do +- cat conftest.in conftest.in >conftest.tmp +- mv conftest.tmp conftest.in +- cp conftest.in conftest.nl +- echo >>conftest.nl +- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break +- cmp -s conftest.out conftest.nl || break +- # 10000 chars as input seems more than enough +- test $lt_ac_count -gt 10 && break +- lt_ac_count=`expr $lt_ac_count + 1` +- if test $lt_ac_count -gt $lt_ac_max; then +- lt_ac_max=$lt_ac_count +- lt_cv_path_SED=$lt_ac_sed ++ for ac_prog in sed gsed; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue ++ # Check for GNU ac_path_SED and select it if it is found. ++ # Check for GNU $ac_path_SED ++case `"$ac_path_SED" --version 2>&1` in ++*GNU*) ++ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; ++*) ++ ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ echo '' >> "conftest.nl" ++ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ ac_count=`expr $ac_count + 1` ++ if test $ac_count -gt ${ac_path_SED_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_SED="$ac_path_SED" ++ ac_path_SED_max=$ac_count + fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ ++ $ac_path_SED_found && break 3 + done + done + ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ ++SED="$ac_cv_path_SED" ++if test -z "$SED"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in \$PATH" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in \$PATH" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++else ++ ac_cv_path_SED=$SED ++fi ++ + fi ++{ echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5 ++echo "${ECHO_T}$ac_cv_path_SED" >&6; } ++ SED="$ac_cv_path_SED" ++ rm -f conftest.sed ++ ++test -z "$SED" && SED=sed ++Xsed="$SED -e 1s/^X//" ++ ++ ++ ++ ++ ++ ++ ++ + +-SED=$lt_cv_path_SED + +-{ echo "$as_me:$LINENO: result: $SED" >&5 +-echo "${ECHO_T}$SED" >&6; } + + { echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 + echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; } +@@ -4299,12 +4257,114 @@ + EGREP="$ac_cv_path_EGREP" + + ++{ echo "$as_me:$LINENO: checking for fgrep" >&5 ++echo $ECHO_N "checking for fgrep... $ECHO_C" >&6; } ++if test "${ac_cv_path_FGREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 ++ then ac_cv_path_FGREP="$GREP -F" ++ else ++ # Extract the first word of "fgrep" to use in msg output ++if test -z "$FGREP"; then ++set dummy fgrep; ac_prog_name=$2 ++if test "${ac_cv_path_FGREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_path_FGREP_found=false ++# Loop through the user's path and test for each of PROGNAME-LIST ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in fgrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue ++ # Check for GNU ac_path_FGREP and select it if it is found. ++ # Check for GNU $ac_path_FGREP ++case `"$ac_path_FGREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; ++*) ++ ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ echo 'FGREP' >> "conftest.nl" ++ "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ ac_count=`expr $ac_count + 1` ++ if test $ac_count -gt ${ac_path_FGREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_FGREP="$ac_path_FGREP" ++ ac_path_FGREP_max=$ac_count ++ fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ ++ $ac_path_FGREP_found && break 3 ++ done ++done ++ ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ ++FGREP="$ac_cv_path_FGREP" ++if test -z "$FGREP"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} ++ { (exit 1); exit 1; }; } ++fi + +-# Check whether --with-gnu-ld was given. +-if test "${with_gnu_ld+set}" = set; then +- withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes + else +- with_gnu_ld=no ++ ac_cv_path_FGREP=$FGREP ++fi ++ ++ ++ fi ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5 ++echo "${ECHO_T}$ac_cv_path_FGREP" >&6; } ++ FGREP="$ac_cv_path_FGREP" ++ ++ ++test -z "$GREP" && GREP=grep ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++# Check whether --with-gnu-ld was given. ++if test "${with_gnu_ld+set}" = set; then ++ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes ++else ++ with_gnu_ld=no + fi + + ac_prog=ld +@@ -4324,9 +4384,9 @@ + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld +- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` +- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do +- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` ++ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` ++ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ++ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; +@@ -4406,33 +4466,15 @@ + with_gnu_ld=$lt_cv_prog_gnu_ld + + +-{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 +-echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; } +-if test "${lt_cv_ld_reload_flag+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- lt_cv_ld_reload_flag='-r' +-fi +-{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 +-echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; } +-reload_flag=$lt_cv_ld_reload_flag +-case $reload_flag in +-"" | " "*) ;; +-*) reload_flag=" $reload_flag" ;; +-esac +-reload_cmds='$LD$reload_flag -o $output$reload_objs' +-case $host_os in +- darwin*) +- if test "$GCC" = yes; then +- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' +- else +- reload_cmds='$LD$reload_flag -o $output$reload_objs' +- fi +- ;; +-esac + +-{ echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 +-echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6; } ++ ++ ++ ++ ++ ++ ++{ echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5 ++echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6; } + if test "${lt_cv_path_NM+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4477,853 +4519,590 @@ + done + IFS="$lt_save_ifs" + done +- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm ++ : ${lt_cv_path_NM=no} + fi + fi + { echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 + echo "${ECHO_T}$lt_cv_path_NM" >&6; } +-NM="$lt_cv_path_NM" ++if test "$lt_cv_path_NM" != "no"; then ++ NM="$lt_cv_path_NM" ++else ++ # Didn't find any BSD compatible name lister, look for dumpbin. ++ if test -n "$ac_tool_prefix"; then ++ for ac_prog in "dumpbin -symbols" "link -dump -symbols" ++ do ++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. ++set dummy $ac_tool_prefix$ac_prog; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_DUMPBIN+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$DUMPBIN"; then ++ ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS + +-{ echo "$as_me:$LINENO: checking whether ln -s works" >&5 +-echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; } +-LN_S=$as_ln_s +-if test "$LN_S" = "ln -s"; then +- { echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6; } ++fi ++fi ++DUMPBIN=$ac_cv_prog_DUMPBIN ++if test -n "$DUMPBIN"; then ++ { echo "$as_me:$LINENO: result: $DUMPBIN" >&5 ++echo "${ECHO_T}$DUMPBIN" >&6; } + else +- { echo "$as_me:$LINENO: result: no, using $LN_S" >&5 +-echo "${ECHO_T}no, using $LN_S" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +-{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 +-echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; } +-if test "${lt_cv_deplibs_check_method+set}" = set; then ++ ++ test -n "$DUMPBIN" && break ++ done ++fi ++if test -z "$DUMPBIN"; then ++ ac_ct_DUMPBIN=$DUMPBIN ++ for ac_prog in "dumpbin -symbols" "link -dump -symbols" ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- lt_cv_file_magic_cmd='$MAGIC_CMD' +-lt_cv_file_magic_test_file= +-lt_cv_deplibs_check_method='unknown' +-# Need to set the preceding variable on all platforms that support +-# interlibrary dependencies. +-# 'none' -- dependencies not supported. +-# `unknown' -- same as none, but documents that we really don't know. +-# 'pass_all' -- all dependencies passed with no checks. +-# 'test_compile' -- check by making test program. +-# 'file_magic [[regex]]' -- check by looking for files in library path +-# which responds to the $file_magic_cmd with a given extended regex. +-# If you have `file' or equivalent on your system and you're not sure +-# whether `pass_all' will *always* work, you probably want this one. +- +-case $host_os in +-aix4* | aix5*) +- lt_cv_deplibs_check_method=pass_all +- ;; ++ if test -n "$ac_ct_DUMPBIN"; then ++ ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS + +-beos*) +- lt_cv_deplibs_check_method=pass_all +- ;; ++fi ++fi ++ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN ++if test -n "$ac_ct_DUMPBIN"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5 ++echo "${ECHO_T}$ac_ct_DUMPBIN" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi + +-bsdi[45]*) +- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' +- lt_cv_file_magic_cmd='/usr/bin/file -L' +- lt_cv_file_magic_test_file=/shlib/libc.so +- ;; + +-cygwin*) +- # func_win32_libid is a shell function defined in ltmain.sh +- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' +- lt_cv_file_magic_cmd='func_win32_libid' +- ;; ++ test -n "$ac_ct_DUMPBIN" && break ++done + +-mingw* | pw32*) +- # Base MSYS/MinGW do not provide the 'file' command needed by +- # func_win32_libid shell function, so use a weaker test based on 'objdump', +- # unless we find 'file', for example because we are cross-compiling. +- if ( file / ) >/dev/null 2>&1; then +- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' +- lt_cv_file_magic_cmd='func_win32_libid' ++ if test "x$ac_ct_DUMPBIN" = x; then ++ DUMPBIN=":" + else +- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' +- lt_cv_file_magic_cmd='$OBJDUMP -f' ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ DUMPBIN=$ac_ct_DUMPBIN + fi +- ;; ++fi + +-darwin* | rhapsody*) +- lt_cv_deplibs_check_method=pass_all +- ;; + +-freebsd* | dragonfly*) +- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then +- case $host_cpu in +- i*86 ) +- # Not sure whether the presence of OpenBSD here was a mistake. +- # Let's accept both of them until this is cleared up. +- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' +- lt_cv_file_magic_cmd=/usr/bin/file +- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` +- ;; +- esac +- else +- lt_cv_deplibs_check_method=pass_all ++ if test "$DUMPBIN" != ":"; then ++ NM="$DUMPBIN" + fi +- ;; ++fi ++test -z "$NM" && NM=nm + +-gnu*) +- lt_cv_deplibs_check_method=pass_all +- ;; + +-hpux10.20* | hpux11*) +- lt_cv_file_magic_cmd=/usr/bin/file +- case $host_cpu in +- ia64*) +- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' +- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so +- ;; +- hppa*64*) +- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' +- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl +- ;; +- *) +- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' +- lt_cv_file_magic_test_file=/usr/lib/libc.sl +- ;; +- esac +- ;; + +-interix[3-9]*) +- # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here +- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' +- ;; + +-irix5* | irix6* | nonstopux*) +- case $LD in +- *-32|*"-32 ") libmagic=32-bit;; +- *-n32|*"-n32 ") libmagic=N32;; +- *-64|*"-64 ") libmagic=64-bit;; +- *) libmagic=never-match;; +- esac +- lt_cv_deplibs_check_method=pass_all +- ;; + +-# This must be Linux ELF. +-linux* | k*bsd*-gnu) +- lt_cv_deplibs_check_method=pass_all +- ;; + +-netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then +- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' +- else +- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' ++{ echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5 ++echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6; } ++if test "${lt_cv_nm_interface+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_nm_interface="BSD nm" ++ echo "int some_variable = 0;" > conftest.$ac_ext ++ (eval echo "\"\$as_me:4654: $ac_compile\"" >&5) ++ (eval "$ac_compile" 2>conftest.err) ++ cat conftest.err >&5 ++ (eval echo "\"\$as_me:4657: $NM \\\"conftest.$ac_objext\\\"\"" >&5) ++ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) ++ cat conftest.err >&5 ++ (eval echo "\"\$as_me:4660: output\"" >&5) ++ cat conftest.out >&5 ++ if $GREP 'External.*some_variable' conftest.out > /dev/null; then ++ lt_cv_nm_interface="MS dumpbin" + fi +- ;; ++ rm -f conftest* ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5 ++echo "${ECHO_T}$lt_cv_nm_interface" >&6; } + +-newos6*) +- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' +- lt_cv_file_magic_cmd=/usr/bin/file +- lt_cv_file_magic_test_file=/usr/lib/libnls.so +- ;; ++{ echo "$as_me:$LINENO: checking whether ln -s works" >&5 ++echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; } ++LN_S=$as_ln_s ++if test "$LN_S" = "ln -s"; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no, using $LN_S" >&5 ++echo "${ECHO_T}no, using $LN_S" >&6; } ++fi + +-nto-qnx*) +- lt_cv_deplibs_check_method=unknown +- ;; ++# find the maximum length of command line arguments ++{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 ++echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; } ++if test "${lt_cv_sys_max_cmd_len+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ i=0 ++ teststring="ABCD" + +-openbsd*) +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' +- else +- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' +- fi +- ;; ++ case $build_os in ++ msdosdjgpp*) ++ # On DJGPP, this test can blow up pretty badly due to problems in libc ++ # (any single argument exceeding 2000 bytes causes a buffer overrun ++ # during glob expansion). Even if it were fixed, the result of this ++ # check would be larger than it should be. ++ lt_cv_sys_max_cmd_len=12288; # 12K is about right ++ ;; + +-osf3* | osf4* | osf5*) +- lt_cv_deplibs_check_method=pass_all +- ;; ++ gnu*) ++ # Under GNU Hurd, this test is not required because there is ++ # no limit to the length of command line arguments. ++ # Libtool will interpret -1 as no limit whatsoever ++ lt_cv_sys_max_cmd_len=-1; ++ ;; + +-rdos*) +- lt_cv_deplibs_check_method=pass_all +- ;; ++ cygwin* | mingw*) ++ # On Win9x/ME, this test blows up -- it succeeds, but takes ++ # about 5 minutes as the teststring grows exponentially. ++ # Worse, since 9x/ME are not pre-emptively multitasking, ++ # you end up with a "frozen" computer, even though with patience ++ # the test eventually succeeds (with a max line length of 256k). ++ # Instead, let's just punt: use the minimum linelength reported by ++ # all of the supported platforms: 8192 (on NT/2K/XP). ++ lt_cv_sys_max_cmd_len=8192; ++ ;; + +-solaris*) +- lt_cv_deplibs_check_method=pass_all +- ;; ++ amigaos*) ++ # On AmigaOS with pdksh, this test takes hours, literally. ++ # So we just punt and use a minimum line length of 8192. ++ lt_cv_sys_max_cmd_len=8192; ++ ;; + +-sysv4 | sysv4.3*) +- case $host_vendor in +- motorola) +- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' +- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ++ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) ++ # This has been around since 386BSD, at least. Likely further. ++ if test -x /sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` ++ elif test -x /usr/sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` ++ else ++ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs ++ fi ++ # And add a safety zone ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; +- ncr) +- lt_cv_deplibs_check_method=pass_all ++ ++ interix*) ++ # We know the value 262144 and hardcode it with a safety zone (like BSD) ++ lt_cv_sys_max_cmd_len=196608 + ;; +- sequent) +- lt_cv_file_magic_cmd='/bin/file' +- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ++ ++ osf*) ++ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure ++ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not ++ # nice to cause kernel panics so lets avoid the loop below. ++ # First set a reasonable default. ++ lt_cv_sys_max_cmd_len=16384 ++ # ++ if test -x /sbin/sysconfig; then ++ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in ++ *1*) lt_cv_sys_max_cmd_len=-1 ;; ++ esac ++ fi + ;; +- sni) +- lt_cv_file_magic_cmd='/bin/file' +- lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" +- lt_cv_file_magic_test_file=/lib/libc.so ++ sco3.2v5*) ++ lt_cv_sys_max_cmd_len=102400 + ;; +- siemens) +- lt_cv_deplibs_check_method=pass_all ++ sysv5* | sco5v6* | sysv4.2uw2*) ++ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` ++ if test -n "$kargmax"; then ++ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` ++ else ++ lt_cv_sys_max_cmd_len=32768 ++ fi + ;; +- pc) +- lt_cv_deplibs_check_method=pass_all ++ *) ++ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` ++ if test -n "$lt_cv_sys_max_cmd_len"; then ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ else ++ # Make teststring a little bigger before we do anything with it. ++ # a 1K string should be a reasonable start. ++ for i in 1 2 3 4 5 6 7 8 ; do ++ teststring=$teststring$teststring ++ done ++ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} ++ # If test is not a shell built-in, we'll probably end up computing a ++ # maximum length that is only half of the actual maximum length, but ++ # we can't tell. ++ while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ ++ = "XX$teststring$teststring"; } >/dev/null 2>&1 && ++ test $i != 17 # 1/2 MB should be enough ++ do ++ i=`expr $i + 1` ++ teststring=$teststring$teststring ++ done ++ # Only check the string length outside the loop. ++ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` ++ teststring= ++ # Add a significant safety factor because C++ compilers can tack on ++ # massive amounts of additional arguments before passing them to the ++ # linker. It appears as though 1/2 is a usable value. ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` ++ fi + ;; + esac +- ;; + +-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) +- lt_cv_deplibs_check_method=pass_all +- ;; +-esac ++fi + ++if test -n $lt_cv_sys_max_cmd_len ; then ++ { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 ++echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; } ++else ++ { echo "$as_me:$LINENO: result: none" >&5 ++echo "${ECHO_T}none" >&6; } + fi +-{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 +-echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; } +-file_magic_cmd=$lt_cv_file_magic_cmd +-deplibs_check_method=$lt_cv_deplibs_check_method +-test -z "$deplibs_check_method" && deplibs_check_method=unknown ++max_cmd_len=$lt_cv_sys_max_cmd_len + + + + +-# If no C compiler was specified, use CC. +-LTCC=${LTCC-"$CC"} + +-# If no C compiler flags were specified, use CFLAGS. +-LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +-# Allow CC to be a program name with arguments. +-compiler=$CC ++: ${CP="cp -f"} ++: ${MV="mv -f"} ++: ${RM="rm -f"} ++ ++{ echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5 ++echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6; } ++# Try some XSI features ++xsi_shell=no ++( _lt_dummy="a/b/c" ++ test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ ++ = c,a/b,, \ ++ && eval 'test $(( 1 + 1 )) -eq 2 \ ++ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ ++ && xsi_shell=yes ++{ echo "$as_me:$LINENO: result: $xsi_shell" >&5 ++echo "${ECHO_T}$xsi_shell" >&6; } ++ ++ ++{ echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5 ++echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6; } ++lt_shell_append=no ++( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ ++ >/dev/null 2>&1 \ ++ && lt_shell_append=yes ++{ echo "$as_me:$LINENO: result: $lt_shell_append" >&5 ++echo "${ECHO_T}$lt_shell_append" >&6; } + + +-# Check whether --enable-libtool-lock was given. +-if test "${enable_libtool_lock+set}" = set; then +- enableval=$enable_libtool_lock; ++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then ++ lt_unset=unset ++else ++ lt_unset=false + fi + +-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +-# Some flags need to be propagated to the compiler or linker for good +-# libtool support. +-case $host in +-ia64-*-hpux*) +- # Find out which ABI we are using. +- echo 'int i;' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- case `/usr/bin/file conftest.$ac_objext` in +- *ELF-32*) +- HPUX_IA64_MODE="32" +- ;; +- *ELF-64*) +- HPUX_IA64_MODE="64" +- ;; +- esac +- fi +- rm -rf conftest* ++ ++ ++ ++# test EBCDIC or ASCII ++case `echo X|tr X '\101'` in ++ A) # ASCII based system ++ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr ++ lt_SP2NL='tr \040 \012' ++ lt_NL2SP='tr \015\012 \040\040' + ;; +-*-*-irix6*) +- # Find out which ABI we are using. +- echo '#line 4734 "configure"' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- if test "$lt_cv_prog_gnu_ld" = yes; then +- case `/usr/bin/file conftest.$ac_objext` in +- *32-bit*) +- LD="${LD-ld} -melf32bsmip" +- ;; +- *N32*) +- LD="${LD-ld} -melf32bmipn32" +- ;; +- *64-bit*) +- LD="${LD-ld} -melf64bmip" +- ;; +- esac +- else +- case `/usr/bin/file conftest.$ac_objext` in +- *32-bit*) +- LD="${LD-ld} -32" +- ;; +- *N32*) +- LD="${LD-ld} -n32" +- ;; +- *64-bit*) +- LD="${LD-ld} -64" +- ;; +- esac +- fi +- fi +- rm -rf conftest* ++ *) # EBCDIC based system ++ lt_SP2NL='tr \100 \n' ++ lt_NL2SP='tr \r\n \100\100' + ;; ++esac + +-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +-s390*-*linux*|sparc*-*linux*) +- # Find out which ABI we are using. +- echo 'int i;' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- case `/usr/bin/file conftest.o` in +- *32-bit*) +- case $host in +- x86_64-*kfreebsd*-gnu) +- LD="${LD-ld} -m elf_i386_fbsd" +- ;; +- x86_64-*linux*) +- LD="${LD-ld} -m elf_i386" +- ;; +- ppc64-*linux*|powerpc64-*linux*) +- LD="${LD-ld} -m elf32ppclinux" +- ;; +- s390x-*linux*) +- LD="${LD-ld} -m elf_s390" +- ;; +- sparc64-*linux*) +- LD="${LD-ld} -m elf32_sparc" +- ;; +- esac +- ;; +- *64-bit*) +- libsuff=64 +- case $host in +- x86_64-*kfreebsd*-gnu) +- LD="${LD-ld} -m elf_x86_64_fbsd" +- ;; +- x86_64-*linux*) +- LD="${LD-ld} -m elf_x86_64" +- ;; +- ppc*-*linux*|powerpc*-*linux*) +- LD="${LD-ld} -m elf64ppc" +- ;; +- s390*-*linux*) +- LD="${LD-ld} -m elf64_s390" +- ;; +- sparc*-*linux*) +- LD="${LD-ld} -m elf64_sparc" +- ;; +- esac +- ;; +- esac +- fi +- rm -rf conftest* +- ;; + +-*-*-sco3.2v5*) +- # On SCO OpenServer 5, we need -belf to get full-featured binaries. +- SAVE_CFLAGS="$CFLAGS" +- CFLAGS="$CFLAGS -belf" +- { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 +-echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; } +-if test "${lt_cv_cc_needs_belf+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu + +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-int +-main () +-{ + +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- lt_cv_cc_needs_belf=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- lt_cv_cc_needs_belf=no +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +- ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu +- +-fi +-{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 +-echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; } +- if test x"$lt_cv_cc_needs_belf" != x"yes"; then +- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf +- CFLAGS="$SAVE_CFLAGS" +- fi +- ;; +-sparc*-*solaris*) +- # Find out which ABI we are using. +- echo 'int i;' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- case `/usr/bin/file conftest.o` in +- *64-bit*) +- case $lt_cv_prog_gnu_ld in +- yes*) LD="${LD-ld} -m elf64_sparc" ;; +- *) LD="${LD-ld} -64" ;; +- esac +- ;; +- esac +- fi +- rm -rf conftest* +- ;; + + +-esac +- +-need_locks="$enable_libtool_lock" + + +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu +-{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; } +-# On Suns, sometimes $CPP names a directory. +-if test -n "$CPP" && test -d "$CPP"; then +- CPP= +-fi +-if test -z "$CPP"; then +- if test "${ac_cv_prog_CPP+set}" = set; then ++{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 ++echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; } ++if test "${lt_cv_ld_reload_flag+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- # Double quotes because CPP needs to be expanded +- for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" +- do +- ac_preproc_ok=false +-for ac_c_preproc_warn_flag in '' yes +-do +- # Use a header file that comes with gcc, so configuring glibc +- # with a fresh cross-compiler works. +- # Prefer to if __STDC__ is defined, since +- # exists even on freestanding compilers. +- # On the NeXT, cc -E runs the code through the compiler's parser, +- # not just through cpp. "Syntax error" is here to catch this case. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif +- Syntax error +-_ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; ++ lt_cv_ld_reload_flag='-r' ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 ++echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; } ++reload_flag=$lt_cv_ld_reload_flag ++case $reload_flag in ++"" | " "*) ;; ++*) reload_flag=" $reload_flag" ;; ++esac ++reload_cmds='$LD$reload_flag -o $output$reload_objs' ++case $host_os in ++ darwin*) ++ if test "$GCC" = yes; then ++ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' ++ else ++ reload_cmds='$LD$reload_flag -o $output$reload_objs' ++ fi ++ ;; + esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || +- test ! -s conftest.err +- }; then +- : +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +- # Broken: fails on valid input. +-continue +-fi + +-rm -f conftest.err conftest.$ac_ext + +- # OK, works on sane cases. Now check whether nonexistent headers +- # can be detected and how. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include +-_ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || +- test ! -s conftest.err +- }; then +- # Broken: success on invalid input. +-continue +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +- # Passes both tests. +-ac_preproc_ok=: +-break +-fi + +-rm -f conftest.err conftest.$ac_ext + +-done +-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +-rm -f conftest.err conftest.$ac_ext +-if $ac_preproc_ok; then +- break +-fi + +- done +- ac_cv_prog_CPP=$CPP + +-fi +- CPP=$ac_cv_prog_CPP +-else +- ac_cv_prog_CPP=$CPP +-fi +-{ echo "$as_me:$LINENO: result: $CPP" >&5 +-echo "${ECHO_T}$CPP" >&6; } +-ac_preproc_ok=false +-for ac_c_preproc_warn_flag in '' yes +-do +- # Use a header file that comes with gcc, so configuring glibc +- # with a fresh cross-compiler works. +- # Prefer to if __STDC__ is defined, since +- # exists even on freestanding compilers. +- # On the NeXT, cc -E runs the code through the compiler's parser, +- # not just through cpp. "Syntax error" is here to catch this case. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif +- Syntax error +-_ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || +- test ! -s conftest.err +- }; then +- : ++ ++ ++{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 ++echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; } ++if test "${lt_cv_deplibs_check_method+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ lt_cv_file_magic_cmd='$MAGIC_CMD' ++lt_cv_file_magic_test_file= ++lt_cv_deplibs_check_method='unknown' ++# Need to set the preceding variable on all platforms that support ++# interlibrary dependencies. ++# 'none' -- dependencies not supported. ++# `unknown' -- same as none, but documents that we really don't know. ++# 'pass_all' -- all dependencies passed with no checks. ++# 'test_compile' -- check by making test program. ++# 'file_magic [[regex]]' -- check by looking for files in library path ++# which responds to the $file_magic_cmd with a given extended regex. ++# If you have `file' or equivalent on your system and you're not sure ++# whether `pass_all' will *always* work, you probably want this one. + +- # Broken: fails on valid input. +-continue +-fi ++case $host_os in ++aix[4-9]*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + +-rm -f conftest.err conftest.$ac_ext ++beos*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + +- # OK, works on sane cases. Now check whether nonexistent headers +- # can be detected and how. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include +-_ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || +- test ! -s conftest.err +- }; then +- # Broken: success on invalid input. +-continue +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++bsdi[45]*) ++ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' ++ lt_cv_file_magic_cmd='/usr/bin/file -L' ++ lt_cv_file_magic_test_file=/shlib/libc.so ++ ;; + +- # Passes both tests. +-ac_preproc_ok=: +-break +-fi ++cygwin*) ++ # func_win32_libid is a shell function defined in ltmain.sh ++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' ++ lt_cv_file_magic_cmd='func_win32_libid' ++ ;; + +-rm -f conftest.err conftest.$ac_ext ++mingw* | pw32*) ++ # Base MSYS/MinGW do not provide the 'file' command needed by ++ # func_win32_libid shell function, so use a weaker test based on 'objdump', ++ # unless we find 'file', for example because we are cross-compiling. ++ if ( file / ) >/dev/null 2>&1; then ++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' ++ lt_cv_file_magic_cmd='func_win32_libid' ++ else ++ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' ++ lt_cv_file_magic_cmd='$OBJDUMP -f' ++ fi ++ ;; + +-done +-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +-rm -f conftest.err conftest.$ac_ext +-if $ac_preproc_ok; then +- : +-else +- { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check +-See \`config.log' for more details." >&5 +-echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-fi ++darwin* | rhapsody*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu ++freebsd* | dragonfly*) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then ++ case $host_cpu in ++ i*86 ) ++ # Not sure whether the presence of OpenBSD here was a mistake. ++ # Let's accept both of them until this is cleared up. ++ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' ++ lt_cv_file_magic_cmd=/usr/bin/file ++ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ++ ;; ++ esac ++ else ++ lt_cv_deplibs_check_method=pass_all ++ fi ++ ;; + ++gnu*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + +-{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } +-if test "${ac_cv_header_stdc+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include +-#include +-#include +-#include ++hpux10.20* | hpux11*) ++ lt_cv_file_magic_cmd=/usr/bin/file ++ case $host_cpu in ++ ia64*) ++ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' ++ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ++ ;; ++ hppa*64*) ++ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' ++ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ++ ;; ++ *) ++ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' ++ lt_cv_file_magic_test_file=/usr/lib/libc.sl ++ ;; ++ esac ++ ;; + +-int +-main () +-{ ++interix[3-9]*) ++ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' ++ ;; + +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_cv_header_stdc=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++irix5* | irix6* | nonstopux*) ++ case $LD in ++ *-32|*"-32 ") libmagic=32-bit;; ++ *-n32|*"-n32 ") libmagic=N32;; ++ *-64|*"-64 ") libmagic=64-bit;; ++ *) libmagic=never-match;; ++ esac ++ lt_cv_deplibs_check_method=pass_all ++ ;; + +- ac_cv_header_stdc=no +-fi ++# This must be Linux ELF. ++linux* | k*bsd*-gnu) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' ++ else ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' ++ fi ++ ;; + +-if test $ac_cv_header_stdc = yes; then +- # SunOS 4.x string.h does not declare mem*, contrary to ANSI. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include ++newos6*) ++ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' ++ lt_cv_file_magic_cmd=/usr/bin/file ++ lt_cv_file_magic_test_file=/usr/lib/libnls.so ++ ;; + +-_ACEOF +-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- $EGREP "memchr" >/dev/null 2>&1; then +- : +-else +- ac_cv_header_stdc=no +-fi +-rm -f conftest* ++*nto* | *qnx*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + +-fi ++openbsd*) ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' ++ else ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' ++ fi ++ ;; + +-if test $ac_cv_header_stdc = yes; then +- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include ++osf3* | osf4* | osf5*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + +-_ACEOF +-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- $EGREP "free" >/dev/null 2>&1; then +- : +-else +- ac_cv_header_stdc=no +-fi +-rm -f conftest* ++rdos*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + +-fi ++solaris*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + +-if test $ac_cv_header_stdc = yes; then +- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. +- if test "$cross_compiling" = yes; then +- : +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include +-#include +-#if ((' ' & 0x0FF) == 0x020) +-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +-#else +-# define ISLOWER(c) \ +- (('a' <= (c) && (c) <= 'i') \ +- || ('j' <= (c) && (c) <= 'r') \ +- || ('s' <= (c) && (c) <= 'z')) +-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +-#endif +- +-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +-int +-main () +-{ +- int i; +- for (i = 0; i < 256; i++) +- if (XOR (islower (i), ISLOWER (i)) +- || toupper (i) != TOUPPER (i)) +- return 2; +- return 0; +-} +-_ACEOF +-rm -f conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_try") 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- : +-else +- echo "$as_me: program exited with status $ac_status" >&5 +-echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + +-( exit $ac_status ) +-ac_cv_header_stdc=no +-fi +-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +-fi ++sysv4 | sysv4.3*) ++ case $host_vendor in ++ motorola) ++ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' ++ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ++ ;; ++ ncr) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ sequent) ++ lt_cv_file_magic_cmd='/bin/file' ++ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ++ ;; ++ sni) ++ lt_cv_file_magic_cmd='/bin/file' ++ lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" ++ lt_cv_file_magic_test_file=/lib/libc.so ++ ;; ++ siemens) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ pc) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ esac ++ ;; + ++tpf*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++esac + + fi +-fi +-{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +-echo "${ECHO_T}$ac_cv_header_stdc" >&6; } +-if test $ac_cv_header_stdc = yes; then ++{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 ++echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; } ++file_magic_cmd=$lt_cv_file_magic_cmd ++deplibs_check_method=$lt_cv_deplibs_check_method ++test -z "$deplibs_check_method" && deplibs_check_method=unknown + +-cat >>confdefs.h <<\_ACEOF +-#define STDC_HEADERS 1 +-_ACEOF + +-fi + +-# On IRIX 5.3, sys/types and inttypes.h are conflicting. + + + +@@ -5333,226 +5112,228 @@ + + + +-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ +- inttypes.h stdint.h unistd.h +-do +-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. ++set dummy ${ac_tool_prefix}ar; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_AR+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_includes_default ++ if test -n "$AR"; then ++ ac_cv_prog_AR="$AR" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_AR="${ac_tool_prefix}ar" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS + +-#include <$ac_header> +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- eval "$as_ac_Header=yes" ++fi ++fi ++AR=$ac_cv_prog_AR ++if test -n "$AR"; then ++ { echo "$as_me:$LINENO: result: $AR" >&5 ++echo "${ECHO_T}$AR" >&6; } + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ + +- eval "$as_ac_Header=no" + fi ++if test -z "$ac_cv_prog_AR"; then ++ ac_ct_AR=$AR ++ # Extract the first word of "ar", so it can be a program name with args. ++set dummy ar; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_AR+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_AR"; then ++ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_AR="ar" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS + +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-ac_res=`eval echo '${'$as_ac_Header'}'` +- { echo "$as_me:$LINENO: result: $ac_res" >&5 +-echo "${ECHO_T}$ac_res" >&6; } +-if test `eval echo '${'$as_ac_Header'}'` = yes; then +- cat >>confdefs.h <<_ACEOF +-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +-_ACEOF ++fi ++ac_ct_AR=$ac_cv_prog_ac_ct_AR ++if test -n "$ac_ct_AR"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 ++echo "${ECHO_T}$ac_ct_AR" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi + ++ if test "x$ac_ct_AR" = x; then ++ AR="false" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ AR=$ac_ct_AR ++ fi ++else ++ AR="$ac_cv_prog_AR" + fi + +-done ++test -z "$AR" && AR=ar ++test -z "$AR_FLAGS" && AR_FLAGS=cru + + + +-for ac_header in dlfcn.h +-do +-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- { echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ ++ ++ ++ ++ ++ ++ ++ ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. ++set dummy ${ac_tool_prefix}strip; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +-fi +-ac_res=`eval echo '${'$as_ac_Header'}'` +- { echo "$as_me:$LINENO: result: $ac_res" >&5 +-echo "${ECHO_T}$ac_res" >&6; } + else +- # Is the header compilable? +-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_includes_default +-#include <$ac_header> +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_header_compiler=yes ++ if test -n "$STRIP"; then ++ ac_cv_prog_STRIP="$STRIP" # Let the user override the test. + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_STRIP="${ac_tool_prefix}strip" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS + +- ac_header_compiler=no ++fi ++fi ++STRIP=$ac_cv_prog_STRIP ++if test -n "$STRIP"; then ++ { echo "$as_me:$LINENO: result: $STRIP" >&5 ++echo "${ECHO_T}$STRIP" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6; } + +-# Is the header present? +-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include <$ac_header> +-_ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || +- test ! -s conftest.err +- }; then +- ac_header_preproc=yes ++fi ++if test -z "$ac_cv_prog_STRIP"; then ++ ac_ct_STRIP=$STRIP ++ # Extract the first word of "strip", so it can be a program name with args. ++set dummy strip; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ if test -n "$ac_ct_STRIP"; then ++ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_STRIP="strip" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS + +- ac_header_preproc=no ++fi ++fi ++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP ++if test -n "$ac_ct_STRIP"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 ++echo "${ECHO_T}$ac_ct_STRIP" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +-rm -f conftest.err conftest.$ac_ext +-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6; } +- +-# So? What about this header? +-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +- yes:no: ) +- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} +- ac_header_preproc=yes +- ;; +- no:yes:* ) +- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +- +- ;; ++ if test "x$ac_ct_STRIP" = x; then ++ STRIP=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; + esac +-{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ STRIP=$ac_ct_STRIP ++ fi + else +- eval "$as_ac_Header=\$ac_header_preproc" ++ STRIP="$ac_cv_prog_STRIP" + fi +-ac_res=`eval echo '${'$as_ac_Header'}'` +- { echo "$as_me:$LINENO: result: $ac_res" >&5 +-echo "${ECHO_T}$ac_res" >&6; } + +-fi +-if test `eval echo '${'$as_ac_Header'}'` = yes; then +- cat >>confdefs.h <<_ACEOF +-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +-_ACEOF ++test -z "$STRIP" && STRIP=: + +-fi + +-done + +-ac_ext=cpp +-ac_cpp='$CXXCPP $CPPFLAGS' +-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +-if test -z "$CXX"; then +- if test -n "$CCC"; then +- CXX=$CCC +- else +- if test -n "$ac_tool_prefix"; then +- for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC +- do +- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +-set dummy $ac_tool_prefix$ac_prog; ac_word=$2 ++ ++ ++ ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. ++set dummy ${ac_tool_prefix}ranlib; ac_word=$2 + { echo "$as_me:$LINENO: checking for $ac_word" >&5 + echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +-if test "${ac_cv_prog_CXX+set}" = set; then ++if test "${ac_cv_prog_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test -n "$CXX"; then +- ac_cv_prog_CXX="$CXX" # Let the user override the test. ++ if test -n "$RANLIB"; then ++ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH +@@ -5561,7 +5342,7 @@ + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" ++ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +@@ -5571,32 +5352,28 @@ + + fi + fi +-CXX=$ac_cv_prog_CXX +-if test -n "$CXX"; then +- { echo "$as_me:$LINENO: result: $CXX" >&5 +-echo "${ECHO_T}$CXX" >&6; } ++RANLIB=$ac_cv_prog_RANLIB ++if test -n "$RANLIB"; then ++ { echo "$as_me:$LINENO: result: $RANLIB" >&5 ++echo "${ECHO_T}$RANLIB" >&6; } + else + { echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6; } + fi + + +- test -n "$CXX" && break +- done + fi +-if test -z "$CXX"; then +- ac_ct_CXX=$CXX +- for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC +-do +- # Extract the first word of "$ac_prog", so it can be a program name with args. +-set dummy $ac_prog; ac_word=$2 ++if test -z "$ac_cv_prog_RANLIB"; then ++ ac_ct_RANLIB=$RANLIB ++ # Extract the first word of "ranlib", so it can be a program name with args. ++set dummy ranlib; ac_word=$2 + { echo "$as_me:$LINENO: checking for $ac_word" >&5 + echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +-if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then ++if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test -n "$ac_ct_CXX"; then +- ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. ++ if test -n "$ac_ct_RANLIB"; then ++ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH +@@ -5605,7 +5382,7 @@ + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_ac_ct_CXX="$ac_prog" ++ ac_cv_prog_ac_ct_RANLIB="ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +@@ -5615,21 +5392,17 @@ + + fi + fi +-ac_ct_CXX=$ac_cv_prog_ac_ct_CXX +-if test -n "$ac_ct_CXX"; then +- { echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 +-echo "${ECHO_T}$ac_ct_CXX" >&6; } ++ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB ++if test -n "$ac_ct_RANLIB"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 ++echo "${ECHO_T}$ac_ct_RANLIB" >&6; } + else + { echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6; } + fi + +- +- test -n "$ac_ct_CXX" && break +-done +- +- if test "x$ac_ct_CXX" = x; then +- CXX="g++" ++ if test "x$ac_ct_RANLIB" = x; then ++ RANLIB=":" + else + case $cross_compiling:$ac_tool_warned in + yes:) +@@ -5641,1278 +5414,560 @@ + configuration is useful to you, please write to autoconf@gnu.org." >&2;} + ac_tool_warned=yes ;; + esac +- CXX=$ac_ct_CXX ++ RANLIB=$ac_ct_RANLIB + fi ++else ++ RANLIB="$ac_cv_prog_RANLIB" + fi + +- fi ++test -z "$RANLIB" && RANLIB=: ++ ++ ++ ++ ++ ++ ++# Determine commands to create old-style static archives. ++old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' ++old_postinstall_cmds='chmod 644 $oldlib' ++old_postuninstall_cmds= ++ ++if test -n "$RANLIB"; then ++ case $host_os in ++ openbsd*) ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" ++ ;; ++ *) ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" ++ ;; ++ esac ++ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" + fi +-# Provide some information about the compiler. +-echo "$as_me:$LINENO: checking for C++ compiler version" >&5 +-ac_compiler=`set X $ac_compile; echo $2` +-{ (ac_try="$ac_compiler --version >&5" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_compiler --version >&5") 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +-{ (ac_try="$ac_compiler -v >&5" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_compiler -v >&5") 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +-{ (ac_try="$ac_compiler -V >&5" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_compiler -V >&5") 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } + +-{ echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 +-echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6; } +-if test "${ac_cv_cxx_compiler_gnu+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-int +-main () +-{ +-#ifndef __GNUC__ +- choke me +-#endif + +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_cxx_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_compiler_gnu=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_compiler_gnu=no +-fi + +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-ac_cv_cxx_compiler_gnu=$ac_compiler_gnu + +-fi +-{ echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 +-echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6; } +-GXX=`test $ac_compiler_gnu = yes && echo yes` +-ac_test_CXXFLAGS=${CXXFLAGS+set} +-ac_save_CXXFLAGS=$CXXFLAGS +-{ echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 +-echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6; } +-if test "${ac_cv_prog_cxx_g+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_save_cxx_werror_flag=$ac_cxx_werror_flag +- ac_cxx_werror_flag=yes +- ac_cv_prog_cxx_g=no +- CXXFLAGS="-g" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-int +-main () +-{ + +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_cxx_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_cv_prog_cxx_g=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +- CXXFLAGS="" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-int +-main () +-{ + +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_cxx_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- : +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cxx_werror_flag=$ac_save_cxx_werror_flag +- CXXFLAGS="-g" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-int +-main () +-{ + +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_cxx_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_cv_prog_cxx_g=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + + +-fi + +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-fi + +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-fi + +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +- ac_cxx_werror_flag=$ac_save_cxx_werror_flag +-fi +-{ echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 +-echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6; } +-if test "$ac_test_CXXFLAGS" = set; then +- CXXFLAGS=$ac_save_CXXFLAGS +-elif test $ac_cv_prog_cxx_g = yes; then +- if test "$GXX" = yes; then +- CXXFLAGS="-g -O2" +- else +- CXXFLAGS="-g" +- fi +-else +- if test "$GXX" = yes; then +- CXXFLAGS="-O2" +- else +- CXXFLAGS= +- fi +-fi +-ac_ext=cpp +-ac_cpp='$CXXCPP $CPPFLAGS' +-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + +-depcc="$CXX" am_compiler_list= + +-{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } +-if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} ++ ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++ ++# Allow CC to be a program name with arguments. ++compiler=$CC ++ ++ ++# Check for command to grab the raw symbol name followed by C symbol from nm. ++{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 ++echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; } ++if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then +- # We make a subdir and do the tests there. Otherwise we can end up +- # making bogus files that we don't know about and never remove. For +- # instance it was reported that on HP-UX the gcc test will end up +- # making a dummy file named `D' -- because `-MD' means `put the output +- # in D'. +- mkdir conftest.dir +- # Copy depcomp to subdir because otherwise we won't find it if we're +- # using a relative directory. +- cp "$am_depcomp" conftest.dir +- cd conftest.dir +- # We will build objects and dependencies in a subdirectory because +- # it helps to detect inapplicable dependency modes. For instance +- # both Tru64's cc and ICC support -MD to output dependencies as a +- # side effect of compilation, but ICC will put the dependencies in +- # the current directory while Tru64 will put them in the object +- # directory. +- mkdir sub + +- am_cv_CXX_dependencies_compiler_type=none +- if test "$am_compiler_list" = ""; then +- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` +- fi +- for depmode in $am_compiler_list; do +- # Setup a source with many dependencies, because some compilers +- # like to wrap large dependency lists on column 80 (with \), and +- # we should not choose a depcomp mode which is confused by this. +- # +- # We need to recreate these files for each test, as the compiler may +- # overwrite some of them when testing with obscure command lines. +- # This happens at least with the AIX C compiler. +- : > sub/conftest.c +- for i in 1 2 3 4 5 6; do +- echo '#include "conftst'$i'.h"' >> sub/conftest.c +- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with +- # Solaris 8's {/usr,}/bin/sh. +- touch sub/conftst$i.h +- done +- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf +- +- case $depmode in +- nosideeffect) +- # after this tag, mechanisms are not by side-effect, so they'll +- # only be used when explicitly requested +- if test "x$enable_dependency_tracking" = xyes; then +- continue +- else +- break +- fi +- ;; +- none) break ;; +- esac +- # We check with `-c' and `-o' for the sake of the "dashmstdout" +- # mode. It turns out that the SunPro C++ compiler does not properly +- # handle `-M -o', and we need to detect this. +- if depmode=$depmode \ +- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ +- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ +- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ +- >/dev/null 2>conftest.err && +- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && +- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && +- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && +- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then +- # icc doesn't choke on unknown options, it will just issue warnings +- # or remarks (even with -Werror). So we grep stderr for any message +- # that says an option was ignored or not supported. +- # When given -MP, icc 7.0 and 7.1 complain thusly: +- # icc: Command line warning: ignoring option '-M'; no argument required +- # The diagnosis changed in icc 8.0: +- # icc: Command line remark: option '-MP' not supported +- if (grep 'ignoring option' conftest.err || +- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else +- am_cv_CXX_dependencies_compiler_type=$depmode +- break +- fi +- fi +- done +- +- cd .. +- rm -rf conftest.dir +-else +- am_cv_CXX_dependencies_compiler_type=none +-fi +- +-fi +-{ echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 +-echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6; } +-CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type +- +- if +- test "x$enable_dependency_tracking" != xno \ +- && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then +- am__fastdepCXX_TRUE= +- am__fastdepCXX_FALSE='#' +-else +- am__fastdepCXX_TRUE='#' +- am__fastdepCXX_FALSE= +-fi ++# These are sane defaults that work on at least a few old systems. ++# [They come from Ultrix. What could be older than Ultrix?!! ;)] + ++# Character class describing NM global symbol codes. ++symcode='[BCDEGRST]' + ++# Regexp to match symbols that can be accessed directly from C. ++sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + ++# Define system-specific variables. ++case $host_os in ++aix*) ++ symcode='[BCDT]' ++ ;; ++cygwin* | mingw* | pw32*) ++ symcode='[ABCDGISTW]' ++ ;; ++hpux*) ++ if test "$host_cpu" = ia64; then ++ symcode='[ABCDEGRST]' ++ fi ++ ;; ++irix* | nonstopux*) ++ symcode='[BCDEGRST]' ++ ;; ++osf*) ++ symcode='[BCDEGQRST]' ++ ;; ++solaris*) ++ symcode='[BDRT]' ++ ;; ++sco3.2v5*) ++ symcode='[DT]' ++ ;; ++sysv4.2uw2*) ++ symcode='[DT]' ++ ;; ++sysv5* | sco5v6* | unixware* | OpenUNIX*) ++ symcode='[ABDT]' ++ ;; ++sysv4) ++ symcode='[DFNSTU]' ++ ;; ++esac + +-if test -n "$CXX" && ( test "X$CXX" != "Xno" && +- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || +- (test "X$CXX" != "Xg++"))) ; then +- ac_ext=cpp +-ac_cpp='$CXXCPP $CPPFLAGS' +-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +-{ echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 +-echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6; } +-if test -z "$CXXCPP"; then +- if test "${ac_cv_prog_CXXCPP+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- # Double quotes because CXXCPP needs to be expanded +- for CXXCPP in "$CXX -E" "/lib/cpp" +- do +- ac_preproc_ok=false +-for ac_cxx_preproc_warn_flag in '' yes +-do +- # Use a header file that comes with gcc, so configuring glibc +- # with a fresh cross-compiler works. +- # Prefer to if __STDC__ is defined, since +- # exists even on freestanding compilers. +- # On the NeXT, cc -E runs the code through the compiler's parser, +- # not just through cpp. "Syntax error" is here to catch this case. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif +- Syntax error +-_ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; ++# If we're using GNU nm, then use its standard symbol codes. ++case `$NM -V 2>&1` in ++*GNU* | *'with BFD'*) ++ symcode='[ABCDGIRSTW]' ;; + esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || +- test ! -s conftest.err +- }; then +- : +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +- # Broken: fails on valid input. +-continue +-fi ++# Transform an extracted symbol line into a proper C declaration. ++# Some systems (esp. on ia64) link data and code symbols differently, ++# so use this general approach. ++lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + +-rm -f conftest.err conftest.$ac_ext ++# Transform an extracted symbol line into symbol name and symbol address ++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" + +- # OK, works on sane cases. Now check whether nonexistent headers +- # can be detected and how. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include +-_ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; ++# Handle CRLF in mingw tool chain ++opt_cr= ++case $build_os in ++mingw*) ++ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ++ ;; + esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || +- test ! -s conftest.err +- }; then +- # Broken: success on invalid input. +-continue +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +- # Passes both tests. +-ac_preproc_ok=: +-break +-fi ++# Try without a prefix underscore, then with it. ++for ac_symprfx in "" "_"; do + +-rm -f conftest.err conftest.$ac_ext ++ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. ++ symxfrm="\\1 $ac_symprfx\\2 \\2" + +-done +-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +-rm -f conftest.err conftest.$ac_ext +-if $ac_preproc_ok; then +- break +-fi ++ # Write the raw and C identifiers. ++ if test "$lt_cv_nm_interface" = "MS dumpbin"; then ++ # Fake it for dumpbin and say T for any non-static function ++ # and D for any global variable. ++ # Also find C++ and __fastcall symbols from MSVC++, ++ # which start with @ or ?. ++ lt_cv_sys_global_symbol_pipe="$AWK '"\ ++" {last_section=section; section=\$ 3};"\ ++" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ ++" \$ 0!~/External *\|/{next};"\ ++" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ ++" {if(hide[section]) next};"\ ++" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ ++" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ ++" s[1]~/^[@?]/{print s[1], s[1]; next};"\ ++" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ ++" ' prfx=^$ac_symprfx" ++ else ++ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" ++ fi + +- done +- ac_cv_prog_CXXCPP=$CXXCPP ++ # Check to see that the pipe works correctly. ++ pipe_works=no + +-fi +- CXXCPP=$ac_cv_prog_CXXCPP +-else +- ac_cv_prog_CXXCPP=$CXXCPP +-fi +-{ echo "$as_me:$LINENO: result: $CXXCPP" >&5 +-echo "${ECHO_T}$CXXCPP" >&6; } +-ac_preproc_ok=false +-for ac_cxx_preproc_warn_flag in '' yes +-do +- # Use a header file that comes with gcc, so configuring glibc +- # with a fresh cross-compiler works. +- # Prefer to if __STDC__ is defined, since +- # exists even on freestanding compilers. +- # On the NeXT, cc -E runs the code through the compiler's parser, +- # not just through cpp. "Syntax error" is here to catch this case. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#ifdef __STDC__ +-# include +-#else +-# include ++ rm -f conftest* ++ cat > conftest.$ac_ext <<_LT_EOF ++#ifdef __cplusplus ++extern "C" { + #endif +- Syntax error +-_ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++char nm_test_var; ++void nm_test_func(void); ++void nm_test_func(void){} ++#ifdef __cplusplus ++} ++#endif ++int main(){nm_test_var='a';nm_test_func();return(0);} ++_LT_EOF ++ ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 + ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || +- test ! -s conftest.err +- }; then +- : +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ (exit $ac_status); }; then ++ # Now try to grab the symbols. ++ nlist=conftest.nm ++ if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 ++ (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && test -s "$nlist"; then ++ # Try sorting and uniquifying the output. ++ if sort "$nlist" | uniq > "$nlist"T; then ++ mv -f "$nlist"T "$nlist" ++ else ++ rm -f "$nlist"T ++ fi + +- # Broken: fails on valid input. +-continue +-fi ++ # Make sure that we snagged all the symbols we need. ++ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then ++ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then ++ cat <<_LT_EOF > conftest.$ac_ext ++#ifdef __cplusplus ++extern "C" { ++#endif + +-rm -f conftest.err conftest.$ac_ext ++_LT_EOF ++ # Now generate the symbol file. ++ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + +- # OK, works on sane cases. Now check whether nonexistent headers +- # can be detected and how. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include +-_ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || +- test ! -s conftest.err +- }; then +- # Broken: success on invalid input. +-continue +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- # Passes both tests. +-ac_preproc_ok=: +-break +-fi +- +-rm -f conftest.err conftest.$ac_ext +- +-done +-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +-rm -f conftest.err conftest.$ac_ext +-if $ac_preproc_ok; then +- : +-else +- { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check +-See \`config.log' for more details." >&5 +-echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-fi ++ cat <<_LT_EOF >> conftest.$ac_ext + +-ac_ext=cpp +-ac_cpp='$CXXCPP $CPPFLAGS' +-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu ++/* The mapping between symbol names and symbols. */ ++const struct { ++ const char *name; ++ void *address; ++} ++lt__PROGRAM__LTX_preloaded_symbols[] = ++{ ++ { "@PROGRAM@", (void *) 0 }, ++_LT_EOF ++ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext ++ cat <<\_LT_EOF >> conftest.$ac_ext ++ {0, (void *) 0} ++}; + +-fi ++/* This works around a problem in FreeBSD linker */ ++#ifdef FREEBSD_WORKAROUND ++static const void *lt_preloaded_setup() { ++ return lt__PROGRAM__LTX_preloaded_symbols; ++} ++#endif + ++#ifdef __cplusplus ++} ++#endif ++_LT_EOF ++ # Now try linking the two files. ++ mv conftest.$ac_objext conftstm.$ac_objext ++ lt_save_LIBS="$LIBS" ++ lt_save_CFLAGS="$CFLAGS" ++ LIBS="conftstm.$ac_objext" ++ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" ++ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && test -s conftest${ac_exeext}; then ++ pipe_works=yes ++ fi ++ LIBS="$lt_save_LIBS" ++ CFLAGS="$lt_save_CFLAGS" ++ else ++ echo "cannot find nm_test_func in $nlist" >&5 ++ fi ++ else ++ echo "cannot find nm_test_var in $nlist" >&5 ++ fi ++ else ++ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 ++ fi ++ else ++ echo "$progname: failed program was:" >&5 ++ cat conftest.$ac_ext >&5 ++ fi ++ rm -rf conftest* conftst* + +-ac_ext=f +-ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' +-ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_f77_compiler_gnu +-if test -n "$ac_tool_prefix"; then +- for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn +- do +- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +-set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +-{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +-if test "${ac_cv_prog_F77+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test -n "$F77"; then +- ac_cv_prog_F77="$F77" # Let the user override the test. +-else +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_F77="$ac_tool_prefix$ac_prog" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 ++ # Do not use the global_symbol_pipe unless it works. ++ if test "$pipe_works" = yes; then ++ break ++ else ++ lt_cv_sys_global_symbol_pipe= + fi + done +-done +-IFS=$as_save_IFS + + fi ++ ++if test -z "$lt_cv_sys_global_symbol_pipe"; then ++ lt_cv_sys_global_symbol_to_cdecl= + fi +-F77=$ac_cv_prog_F77 +-if test -n "$F77"; then +- { echo "$as_me:$LINENO: result: $F77" >&5 +-echo "${ECHO_T}$F77" >&6; } ++if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then ++ { echo "$as_me:$LINENO: result: failed" >&5 ++echo "${ECHO_T}failed" >&6; } + else +- { echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6; } ++ { echo "$as_me:$LINENO: result: ok" >&5 ++echo "${ECHO_T}ok" >&6; } + fi + + +- test -n "$F77" && break +- done +-fi +-if test -z "$F77"; then +- ac_ct_F77=$F77 +- for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn +-do +- # Extract the first word of "$ac_prog", so it can be a program name with args. +-set dummy $ac_prog; ac_word=$2 +-{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +-if test "${ac_cv_prog_ac_ct_F77+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test -n "$ac_ct_F77"; then +- ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test. +-else +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_ac_ct_F77="$ac_prog" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +-done +-IFS=$as_save_IFS + +-fi +-fi +-ac_ct_F77=$ac_cv_prog_ac_ct_F77 +-if test -n "$ac_ct_F77"; then +- { echo "$as_me:$LINENO: result: $ac_ct_F77" >&5 +-echo "${ECHO_T}$ac_ct_F77" >&6; } +-else +- { echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6; } +-fi + + +- test -n "$ac_ct_F77" && break +-done + +- if test "x$ac_ct_F77" = x; then +- F77="" +- else +- case $cross_compiling:$ac_tool_warned in +-yes:) +-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +-whose name does not start with the host triplet. If you think this +-configuration is useful to you, please write to autoconf@gnu.org." >&5 +-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +-whose name does not start with the host triplet. If you think this +-configuration is useful to you, please write to autoconf@gnu.org." >&2;} +-ac_tool_warned=yes ;; +-esac +- F77=$ac_ct_F77 +- fi +-fi + + +-# Provide some information about the compiler. +-echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5 +-ac_compiler=`set X $ac_compile; echo $2` +-{ (ac_try="$ac_compiler --version >&5" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_compiler --version >&5") 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +-{ (ac_try="$ac_compiler -v >&5" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_compiler -v >&5") 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +-{ (ac_try="$ac_compiler -V >&5" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_compiler -V >&5") 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +-rm -f a.out + +-# If we don't use `.F' as extension, the preprocessor is not run on the +-# input file. (Note that this only needs to work for GNU compilers.) +-ac_save_ext=$ac_ext +-ac_ext=F +-{ echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5 +-echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6; } +-if test "${ac_cv_f77_compiler_gnu+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +- program main +-#ifndef __GNUC__ +- choke me +-#endif + +- end +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_f77_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_compiler_gnu=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_compiler_gnu=no +-fi + +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-ac_cv_f77_compiler_gnu=$ac_compiler_gnu + +-fi +-{ echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5 +-echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6; } +-ac_ext=$ac_save_ext +-ac_test_FFLAGS=${FFLAGS+set} +-ac_save_FFLAGS=$FFLAGS +-FFLAGS= +-{ echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5 +-echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6; } +-if test "${ac_cv_prog_f77_g+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- FFLAGS=-g +-cat >conftest.$ac_ext <<_ACEOF +- program main + +- end +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_f77_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_cv_prog_f77_g=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_prog_f77_g=no +-fi + +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +- +-fi +-{ echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5 +-echo "${ECHO_T}$ac_cv_prog_f77_g" >&6; } +-if test "$ac_test_FFLAGS" = set; then +- FFLAGS=$ac_save_FFLAGS +-elif test $ac_cv_prog_f77_g = yes; then +- if test "x$ac_cv_f77_compiler_gnu" = xyes; then +- FFLAGS="-g -O2" +- else +- FFLAGS="-g" +- fi +-else +- if test "x$ac_cv_f77_compiler_gnu" = xyes; then +- FFLAGS="-O2" +- else +- FFLAGS= +- fi +-fi +- +-G77=`test $ac_compiler_gnu = yes && echo yes` +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + +-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! +- +-# find the maximum length of command line arguments +-{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 +-echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; } +-if test "${lt_cv_sys_max_cmd_len+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- i=0 +- teststring="ABCD" +- +- case $build_os in +- msdosdjgpp*) +- # On DJGPP, this test can blow up pretty badly due to problems in libc +- # (any single argument exceeding 2000 bytes causes a buffer overrun +- # during glob expansion). Even if it were fixed, the result of this +- # check would be larger than it should be. +- lt_cv_sys_max_cmd_len=12288; # 12K is about right +- ;; + +- gnu*) +- # Under GNU Hurd, this test is not required because there is +- # no limit to the length of command line arguments. +- # Libtool will interpret -1 as no limit whatsoever +- lt_cv_sys_max_cmd_len=-1; +- ;; + +- cygwin* | mingw*) +- # On Win9x/ME, this test blows up -- it succeeds, but takes +- # about 5 minutes as the teststring grows exponentially. +- # Worse, since 9x/ME are not pre-emptively multitasking, +- # you end up with a "frozen" computer, even though with patience +- # the test eventually succeeds (with a max line length of 256k). +- # Instead, let's just punt: use the minimum linelength reported by +- # all of the supported platforms: 8192 (on NT/2K/XP). +- lt_cv_sys_max_cmd_len=8192; +- ;; + +- amigaos*) +- # On AmigaOS with pdksh, this test takes hours, literally. +- # So we just punt and use a minimum line length of 8192. +- lt_cv_sys_max_cmd_len=8192; +- ;; + +- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) +- # This has been around since 386BSD, at least. Likely further. +- if test -x /sbin/sysctl; then +- lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` +- elif test -x /usr/sbin/sysctl; then +- lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` +- else +- lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs +- fi +- # And add a safety zone +- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` +- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` +- ;; ++# Check whether --enable-libtool-lock was given. ++if test "${enable_libtool_lock+set}" = set; then ++ enableval=$enable_libtool_lock; ++fi + +- interix*) +- # We know the value 262144 and hardcode it with a safety zone (like BSD) +- lt_cv_sys_max_cmd_len=196608 +- ;; ++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +- osf*) +- # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure +- # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not +- # nice to cause kernel panics so lets avoid the loop below. +- # First set a reasonable default. +- lt_cv_sys_max_cmd_len=16384 +- # +- if test -x /sbin/sysconfig; then +- case `/sbin/sysconfig -q proc exec_disable_arg_limit` in +- *1*) lt_cv_sys_max_cmd_len=-1 ;; ++# Some flags need to be propagated to the compiler or linker for good ++# libtool support. ++case $host in ++ia64-*-hpux*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ case `/usr/bin/file conftest.$ac_objext` in ++ *ELF-32*) ++ HPUX_IA64_MODE="32" ++ ;; ++ *ELF-64*) ++ HPUX_IA64_MODE="64" ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; ++*-*-irix6*) ++ # Find out which ABI we are using. ++ echo '#line 5771 "configure"' > conftest.$ac_ext ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ case `/usr/bin/file conftest.$ac_objext` in ++ *32-bit*) ++ LD="${LD-ld} -melf32bsmip" ++ ;; ++ *N32*) ++ LD="${LD-ld} -melf32bmipn32" ++ ;; ++ *64-bit*) ++ LD="${LD-ld} -melf64bmip" ++ ;; + esac +- fi +- ;; +- sco3.2v5*) +- lt_cv_sys_max_cmd_len=102400 +- ;; +- sysv5* | sco5v6* | sysv4.2uw2*) +- kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` +- if test -n "$kargmax"; then +- lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` +- else +- lt_cv_sys_max_cmd_len=32768 +- fi +- ;; +- *) +- lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` +- if test -n "$lt_cv_sys_max_cmd_len"; then +- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` +- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else +- SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} +- while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \ +- = "XX$teststring") >/dev/null 2>&1 && +- new_result=`expr "X$teststring" : ".*" 2>&1` && +- lt_cv_sys_max_cmd_len=$new_result && +- test $i != 17 # 1/2 MB should be enough +- do +- i=`expr $i + 1` +- teststring=$teststring$teststring +- done +- teststring= +- # Add a significant safety factor because C++ compilers can tack on massive +- # amounts of additional arguments before passing them to the linker. +- # It appears as though 1/2 is a usable value. +- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` ++ case `/usr/bin/file conftest.$ac_objext` in ++ *32-bit*) ++ LD="${LD-ld} -32" ++ ;; ++ *N32*) ++ LD="${LD-ld} -n32" ++ ;; ++ *64-bit*) ++ LD="${LD-ld} -64" ++ ;; ++ esac + fi +- ;; +- esac +- +-fi +- +-if test -n $lt_cv_sys_max_cmd_len ; then +- { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 +-echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; } +-else +- { echo "$as_me:$LINENO: result: none" >&5 +-echo "${ECHO_T}none" >&6; } +-fi +- +- +- ++ fi ++ rm -rf conftest* ++ ;; + ++x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ ++s390*-*linux*|s390*-*tpf*|sparc*-*linux*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ case `/usr/bin/file conftest.o` in ++ *32-bit*) ++ case $host in ++ x86_64-*kfreebsd*-gnu) ++ LD="${LD-ld} -m elf_i386_fbsd" ++ ;; ++ x86_64-*linux*) ++ LD="${LD-ld} -m elf_i386" ++ ;; ++ ppc64-*linux*|powerpc64-*linux*) ++ LD="${LD-ld} -m elf32ppclinux" ++ ;; ++ s390x-*linux*) ++ LD="${LD-ld} -m elf_s390" ++ ;; ++ sparc64-*linux*) ++ LD="${LD-ld} -m elf32_sparc" ++ ;; ++ esac ++ ;; ++ *64-bit*) ++ case $host in ++ x86_64-*kfreebsd*-gnu) ++ LD="${LD-ld} -m elf_x86_64_fbsd" ++ ;; ++ x86_64-*linux*) ++ LD="${LD-ld} -m elf_x86_64" ++ ;; ++ ppc*-*linux*|powerpc*-*linux*) ++ LD="${LD-ld} -m elf64ppc" ++ ;; ++ s390*-*linux*|s390*-*tpf*) ++ LD="${LD-ld} -m elf64_s390" ++ ;; ++ sparc*-*linux*) ++ LD="${LD-ld} -m elf64_sparc" ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; + +-# Check for command to grab the raw symbol name followed by C symbol from nm. +-{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 +-echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; } +-if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then ++*-*-sco3.2v5*) ++ # On SCO OpenServer 5, we need -belf to get full-featured binaries. ++ SAVE_CFLAGS="$CFLAGS" ++ CFLAGS="$CFLAGS -belf" ++ { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 ++echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; } ++if test "${lt_cv_cc_needs_belf+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else ++ ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu + +-# These are sane defaults that work on at least a few old systems. +-# [They come from Ultrix. What could be older than Ultrix?!! ;)] ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +-# Character class describing NM global symbol codes. +-symcode='[BCDEGRST]' ++int ++main () ++{ + +-# Regexp to match symbols that can be accessed directly from C. +-sympat='\([_A-Za-z][_A-Za-z0-9]*\)' ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ lt_cv_cc_needs_belf=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-# Transform an extracted symbol line into a proper C declaration +-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" ++ lt_cv_cc_needs_belf=no ++fi + +-# Transform an extracted symbol line into symbol name and symbol address +-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu + +-# Define system-specific variables. +-case $host_os in +-aix*) +- symcode='[BCDT]' +- ;; +-cygwin* | mingw* | pw32*) +- symcode='[ABCDGISTW]' +- ;; +-hpux*) # Its linker distinguishes data from code symbols +- if test "$host_cpu" = ia64; then +- symcode='[ABCDEGRST]' +- fi +- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" +- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" +- ;; +-linux* | k*bsd*-gnu) +- if test "$host_cpu" = ia64; then +- symcode='[ABCDGIRSTW]' +- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" +- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 ++echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; } ++ if test x"$lt_cv_cc_needs_belf" != x"yes"; then ++ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf ++ CFLAGS="$SAVE_CFLAGS" + fi + ;; +-irix* | nonstopux*) +- symcode='[BCDEGRST]' +- ;; +-osf*) +- symcode='[BCDEGQRST]' +- ;; +-solaris*) +- symcode='[BDRT]' +- ;; +-sco3.2v5*) +- symcode='[DT]' +- ;; +-sysv4.2uw2*) +- symcode='[DT]' +- ;; +-sysv5* | sco5v6* | unixware* | OpenUNIX*) +- symcode='[ABDT]' +- ;; +-sysv4) +- symcode='[DFNSTU]' +- ;; +-esac +- +-# Handle CRLF in mingw tool chain +-opt_cr= +-case $build_os in +-mingw*) +- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp +- ;; +-esac +- +-# If we're using GNU nm, then use its standard symbol codes. +-case `$NM -V 2>&1` in +-*GNU* | *'with BFD'*) +- symcode='[ABCDGIRSTW]' ;; +-esac +- +-# Try without a prefix undercore, then with it. +-for ac_symprfx in "" "_"; do +- +- # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. +- symxfrm="\\1 $ac_symprfx\\2 \\2" +- +- # Write the raw and C identifiers. +- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" +- +- # Check to see that the pipe works correctly. +- pipe_works=no +- +- rm -f conftest* +- cat > conftest.$ac_ext < conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +- # Now try to grab the symbols. +- nlist=conftest.nm +- if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 +- (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && test -s "$nlist"; then +- # Try sorting and uniquifying the output. +- if sort "$nlist" | uniq > "$nlist"T; then +- mv -f "$nlist"T "$nlist" +- else +- rm -f "$nlist"T +- fi +- +- # Make sure that we snagged all the symbols we need. +- if grep ' nm_test_var$' "$nlist" >/dev/null; then +- if grep ' nm_test_func$' "$nlist" >/dev/null; then +- cat < conftest.$ac_ext +-#ifdef __cplusplus +-extern "C" { +-#endif +- +-EOF +- # Now generate the symbol file. +- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' +- +- cat <> conftest.$ac_ext +-#if defined (__STDC__) && __STDC__ +-# define lt_ptr_t void * +-#else +-# define lt_ptr_t char * +-# define const +-#endif +- +-/* The mapping between symbol names and symbols. */ +-const struct { +- const char *name; +- lt_ptr_t address; +-} +-lt_preloaded_symbols[] = +-{ +-EOF +- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext +- cat <<\EOF >> conftest.$ac_ext +- {0, (lt_ptr_t) 0} +-}; +- +-#ifdef __cplusplus +-} +-#endif +-EOF +- # Now try linking the two files. +- mv conftest.$ac_objext conftstm.$ac_objext +- lt_save_LIBS="$LIBS" +- lt_save_CFLAGS="$CFLAGS" +- LIBS="conftstm.$ac_objext" +- CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" +- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && test -s conftest${ac_exeext}; then +- pipe_works=yes +- fi +- LIBS="$lt_save_LIBS" +- CFLAGS="$lt_save_CFLAGS" +- else +- echo "cannot find nm_test_func in $nlist" >&5 ++ case `/usr/bin/file conftest.o` in ++ *64-bit*) ++ case $lt_cv_prog_gnu_ld in ++ yes*) LD="${LD-ld} -m elf64_sparc" ;; ++ *) ++ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then ++ LD="${LD-ld} -64" + fi +- else +- echo "cannot find nm_test_var in $nlist" >&5 +- fi +- else +- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 +- fi +- else +- echo "$progname: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- fi +- rm -f conftest* conftst* +- +- # Do not use the global_symbol_pipe unless it works. +- if test "$pipe_works" = yes; then +- break +- else +- lt_cv_sys_global_symbol_pipe= +- fi +-done +- +-fi +- +-if test -z "$lt_cv_sys_global_symbol_pipe"; then +- lt_cv_sys_global_symbol_to_cdecl= +-fi +-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then +- { echo "$as_me:$LINENO: result: failed" >&5 +-echo "${ECHO_T}failed" >&6; } +-else +- { echo "$as_me:$LINENO: result: ok" >&5 +-echo "${ECHO_T}ok" >&6; } +-fi +- +-{ echo "$as_me:$LINENO: checking for objdir" >&5 +-echo $ECHO_N "checking for objdir... $ECHO_C" >&6; } +-if test "${lt_cv_objdir+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- rm -f .libs 2>/dev/null +-mkdir .libs 2>/dev/null +-if test -d .libs; then +- lt_cv_objdir=.libs +-else +- # MS-DOS does not allow filenames that begin with a dot. +- lt_cv_objdir=_libs +-fi +-rmdir .libs 2>/dev/null +-fi +-{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 +-echo "${ECHO_T}$lt_cv_objdir" >&6; } +-objdir=$lt_cv_objdir +- +- +- +- +- +-case $host_os in +-aix3*) +- # AIX sometimes has problems with the GCC collect2 program. For some +- # reason, if we set the COLLECT_NAMES environment variable, the problems +- # vanish in a puff of smoke. +- if test "X${COLLECT_NAMES+set}" != Xset; then +- COLLECT_NAMES= +- export COLLECT_NAMES ++ ;; ++ esac ++ ;; ++ esac + fi ++ rm -rf conftest* + ;; + esac + +-# Sed substitution that helps us do robust quoting. It backslashifies +-# metacharacters that are still active within double-quoted strings. +-Xsed='sed -e 1s/^X//' +-sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' +- +-# Same as above, but do not quote variable references. +-double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' +- +-# Sed substitution to delay expansion of an escaped shell variable in a +-# double_quote_subst'ed string. +-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' +- +-# Sed substitution to avoid accidental globbing in evaled expressions +-no_glob_subst='s/\*/\\\*/g' +- +-# Constants: +-rm="rm -f" +- +-# Global variables: +-default_ofile=libtool +-can_build_shared=yes ++need_locks="$enable_libtool_lock" + +-# All known linkers require a `.a' archive for static linking (except MSVC, +-# which needs '.lib'). +-libext=a +-ltmain="$ac_aux_dir/ltmain.sh" +-ofile="$default_ofile" +-with_gnu_ld="$lt_cv_prog_gnu_ld" + +-if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +-set dummy ${ac_tool_prefix}ar; ac_word=$2 ++ case $host_os in ++ rhapsody* | darwin*) ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. ++set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 + { echo "$as_me:$LINENO: checking for $ac_word" >&5 + echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +-if test "${ac_cv_prog_AR+set}" = set; then ++if test "${ac_cv_prog_DSYMUTIL+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test -n "$AR"; then +- ac_cv_prog_AR="$AR" # Let the user override the test. ++ if test -n "$DSYMUTIL"; then ++ ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH +@@ -6921,7 +5976,7 @@ + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_AR="${ac_tool_prefix}ar" ++ ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +@@ -6931,10 +5986,10 @@ + + fi + fi +-AR=$ac_cv_prog_AR +-if test -n "$AR"; then +- { echo "$as_me:$LINENO: result: $AR" >&5 +-echo "${ECHO_T}$AR" >&6; } ++DSYMUTIL=$ac_cv_prog_DSYMUTIL ++if test -n "$DSYMUTIL"; then ++ { echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 ++echo "${ECHO_T}$DSYMUTIL" >&6; } + else + { echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6; } +@@ -6942,17 +5997,17 @@ + + + fi +-if test -z "$ac_cv_prog_AR"; then +- ac_ct_AR=$AR +- # Extract the first word of "ar", so it can be a program name with args. +-set dummy ar; ac_word=$2 ++if test -z "$ac_cv_prog_DSYMUTIL"; then ++ ac_ct_DSYMUTIL=$DSYMUTIL ++ # Extract the first word of "dsymutil", so it can be a program name with args. ++set dummy dsymutil; ac_word=$2 + { echo "$as_me:$LINENO: checking for $ac_word" >&5 + echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +-if test "${ac_cv_prog_ac_ct_AR+set}" = set; then ++if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test -n "$ac_ct_AR"; then +- ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. ++ if test -n "$ac_ct_DSYMUTIL"; then ++ ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH +@@ -6961,7 +6016,7 @@ + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_ac_ct_AR="ar" ++ ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +@@ -6971,17 +6026,17 @@ + + fi + fi +-ac_ct_AR=$ac_cv_prog_ac_ct_AR +-if test -n "$ac_ct_AR"; then +- { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 +-echo "${ECHO_T}$ac_ct_AR" >&6; } ++ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL ++if test -n "$ac_ct_DSYMUTIL"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 ++echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6; } + else + { echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6; } + fi + +- if test "x$ac_ct_AR" = x; then +- AR="false" ++ if test "x$ac_ct_DSYMUTIL" = x; then ++ DSYMUTIL=":" + else + case $cross_compiling:$ac_tool_warned in + yes:) +@@ -6993,22 +6048,22 @@ + configuration is useful to you, please write to autoconf@gnu.org." >&2;} + ac_tool_warned=yes ;; + esac +- AR=$ac_ct_AR ++ DSYMUTIL=$ac_ct_DSYMUTIL + fi + else +- AR="$ac_cv_prog_AR" ++ DSYMUTIL="$ac_cv_prog_DSYMUTIL" + fi + +-if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +-set dummy ${ac_tool_prefix}ranlib; ac_word=$2 ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. ++set dummy ${ac_tool_prefix}nmedit; ac_word=$2 + { echo "$as_me:$LINENO: checking for $ac_word" >&5 + echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +-if test "${ac_cv_prog_RANLIB+set}" = set; then ++if test "${ac_cv_prog_NMEDIT+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test -n "$RANLIB"; then +- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. ++ if test -n "$NMEDIT"; then ++ ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH +@@ -7017,7 +6072,7 @@ + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" ++ ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +@@ -7027,10 +6082,10 @@ + + fi + fi +-RANLIB=$ac_cv_prog_RANLIB +-if test -n "$RANLIB"; then +- { echo "$as_me:$LINENO: result: $RANLIB" >&5 +-echo "${ECHO_T}$RANLIB" >&6; } ++NMEDIT=$ac_cv_prog_NMEDIT ++if test -n "$NMEDIT"; then ++ { echo "$as_me:$LINENO: result: $NMEDIT" >&5 ++echo "${ECHO_T}$NMEDIT" >&6; } + else + { echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6; } +@@ -7038,17 +6093,17 @@ + + + fi +-if test -z "$ac_cv_prog_RANLIB"; then +- ac_ct_RANLIB=$RANLIB +- # Extract the first word of "ranlib", so it can be a program name with args. +-set dummy ranlib; ac_word=$2 ++if test -z "$ac_cv_prog_NMEDIT"; then ++ ac_ct_NMEDIT=$NMEDIT ++ # Extract the first word of "nmedit", so it can be a program name with args. ++set dummy nmedit; ac_word=$2 + { echo "$as_me:$LINENO: checking for $ac_word" >&5 + echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then ++if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test -n "$ac_ct_RANLIB"; then +- ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. ++ if test -n "$ac_ct_NMEDIT"; then ++ ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH +@@ -7057,7 +6112,7 @@ + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_ac_ct_RANLIB="ranlib" ++ ac_cv_prog_ac_ct_NMEDIT="nmedit" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +@@ -7067,17 +6122,17 @@ + + fi + fi +-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +-if test -n "$ac_ct_RANLIB"; then +- { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +-echo "${ECHO_T}$ac_ct_RANLIB" >&6; } ++ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT ++if test -n "$ac_ct_NMEDIT"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 ++echo "${ECHO_T}$ac_ct_NMEDIT" >&6; } + else + { echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6; } + fi + +- if test "x$ac_ct_RANLIB" = x; then +- RANLIB=":" ++ if test "x$ac_ct_NMEDIT" = x; then ++ NMEDIT=":" + else + case $cross_compiling:$ac_tool_warned in + yes:) +@@ -7089,22 +6144,22 @@ + configuration is useful to you, please write to autoconf@gnu.org." >&2;} + ac_tool_warned=yes ;; + esac +- RANLIB=$ac_ct_RANLIB ++ NMEDIT=$ac_ct_NMEDIT + fi + else +- RANLIB="$ac_cv_prog_RANLIB" ++ NMEDIT="$ac_cv_prog_NMEDIT" + fi + +-if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +-set dummy ${ac_tool_prefix}strip; ac_word=$2 ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. ++set dummy ${ac_tool_prefix}lipo; ac_word=$2 + { echo "$as_me:$LINENO: checking for $ac_word" >&5 + echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +-if test "${ac_cv_prog_STRIP+set}" = set; then ++if test "${ac_cv_prog_LIPO+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test -n "$STRIP"; then +- ac_cv_prog_STRIP="$STRIP" # Let the user override the test. ++ if test -n "$LIPO"; then ++ ac_cv_prog_LIPO="$LIPO" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH +@@ -7113,7 +6168,7 @@ + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_STRIP="${ac_tool_prefix}strip" ++ ac_cv_prog_LIPO="${ac_tool_prefix}lipo" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +@@ -7123,10 +6178,10 @@ + + fi + fi +-STRIP=$ac_cv_prog_STRIP +-if test -n "$STRIP"; then +- { echo "$as_me:$LINENO: result: $STRIP" >&5 +-echo "${ECHO_T}$STRIP" >&6; } ++LIPO=$ac_cv_prog_LIPO ++if test -n "$LIPO"; then ++ { echo "$as_me:$LINENO: result: $LIPO" >&5 ++echo "${ECHO_T}$LIPO" >&6; } + else + { echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6; } +@@ -7134,17 +6189,17 @@ + + + fi +-if test -z "$ac_cv_prog_STRIP"; then +- ac_ct_STRIP=$STRIP +- # Extract the first word of "strip", so it can be a program name with args. +-set dummy strip; ac_word=$2 ++if test -z "$ac_cv_prog_LIPO"; then ++ ac_ct_LIPO=$LIPO ++ # Extract the first word of "lipo", so it can be a program name with args. ++set dummy lipo; ac_word=$2 + { echo "$as_me:$LINENO: checking for $ac_word" >&5 + echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then ++if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test -n "$ac_ct_STRIP"; then +- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. ++ if test -n "$ac_ct_LIPO"; then ++ ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH +@@ -7153,7 +6208,7 @@ + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_ac_ct_STRIP="strip" ++ ac_cv_prog_ac_ct_LIPO="lipo" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +@@ -7163,17 +6218,17 @@ + + fi + fi +-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +-if test -n "$ac_ct_STRIP"; then +- { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +-echo "${ECHO_T}$ac_ct_STRIP" >&6; } ++ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO ++if test -n "$ac_ct_LIPO"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5 ++echo "${ECHO_T}$ac_ct_LIPO" >&6; } + else + { echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6; } + fi + +- if test "x$ac_ct_STRIP" = x; then +- STRIP=":" ++ if test "x$ac_ct_LIPO" = x; then ++ LIPO=":" + else + case $cross_compiling:$ac_tool_warned in + yes:) +@@ -7185,11011 +6240,3276 @@ + configuration is useful to you, please write to autoconf@gnu.org." >&2;} + ac_tool_warned=yes ;; + esac +- STRIP=$ac_ct_STRIP ++ LIPO=$ac_ct_LIPO + fi + else +- STRIP="$ac_cv_prog_STRIP" +-fi +- +- +-old_CC="$CC" +-old_CFLAGS="$CFLAGS" +- +-# Set sane defaults for various variables +-test -z "$AR" && AR=ar +-test -z "$AR_FLAGS" && AR_FLAGS=cru +-test -z "$AS" && AS=as +-test -z "$CC" && CC=cc +-test -z "$LTCC" && LTCC=$CC +-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +-test -z "$DLLTOOL" && DLLTOOL=dlltool +-test -z "$LD" && LD=ld +-test -z "$LN_S" && LN_S="ln -s" +-test -z "$MAGIC_CMD" && MAGIC_CMD=file +-test -z "$NM" && NM=nm +-test -z "$SED" && SED=sed +-test -z "$OBJDUMP" && OBJDUMP=objdump +-test -z "$RANLIB" && RANLIB=: +-test -z "$STRIP" && STRIP=: +-test -z "$ac_objext" && ac_objext=o +- +-# Determine commands to create old-style static archives. +-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +-old_postinstall_cmds='chmod 644 $oldlib' +-old_postuninstall_cmds= +- +-if test -n "$RANLIB"; then +- case $host_os in +- openbsd*) +- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" +- ;; +- *) +- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" +- ;; +- esac +- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" ++ LIPO="$ac_cv_prog_LIPO" + fi + +-for cc_temp in $compiler""; do +- case $cc_temp in +- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; +- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; +- \-*) ;; +- *) break;; +- esac +-done +-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` +- +- +-# Only perform the check for file, if the check method requires it +-case $deplibs_check_method in +-file_magic*) +- if test "$file_magic_cmd" = '$MAGIC_CMD'; then +- { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 +-echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; } +-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. ++set dummy ${ac_tool_prefix}otool; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_OTOOL+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- case $MAGIC_CMD in +-[\\/*] | ?:[\\/]*) +- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. +- ;; +-*) +- lt_save_MAGIC_CMD="$MAGIC_CMD" +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +- ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" +- for ac_dir in $ac_dummy; do +- IFS="$lt_save_ifs" +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/${ac_tool_prefix}file; then +- lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" +- if test -n "$file_magic_test_file"; then +- case $deplibs_check_method in +- "file_magic "*) +- file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` +- MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | +- $EGREP "$file_magic_regex" > /dev/null; then +- : +- else +- cat <&2 +- +-*** Warning: the command libtool uses to detect shared libraries, +-*** $file_magic_cmd, produces output that libtool cannot recognize. +-*** The result is that libtool may fail to recognize shared libraries +-*** as such. This will affect the creation of libtool libraries that +-*** depend on shared libraries, but programs linked with such libtool +-*** libraries will work regardless of this problem. Nevertheless, you +-*** may want to report the problem to your system manager and/or to +-*** bug-libtool@gnu.org ++ if test -n "$OTOOL"; then ++ ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_OTOOL="${ac_tool_prefix}otool" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS + +-EOF +- fi ;; +- esac +- fi +- break +- fi +- done +- IFS="$lt_save_ifs" +- MAGIC_CMD="$lt_save_MAGIC_CMD" +- ;; +-esac + fi +- +-MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +-if test -n "$MAGIC_CMD"; then +- { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +-echo "${ECHO_T}$MAGIC_CMD" >&6; } ++fi ++OTOOL=$ac_cv_prog_OTOOL ++if test -n "$OTOOL"; then ++ { echo "$as_me:$LINENO: result: $OTOOL" >&5 ++echo "${ECHO_T}$OTOOL" >&6; } + else + { echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6; } + fi + +-if test -z "$lt_cv_path_MAGIC_CMD"; then +- if test -n "$ac_tool_prefix"; then +- { echo "$as_me:$LINENO: checking for file" >&5 +-echo $ECHO_N "checking for file... $ECHO_C" >&6; } +-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then ++ ++fi ++if test -z "$ac_cv_prog_OTOOL"; then ++ ac_ct_OTOOL=$OTOOL ++ # Extract the first word of "otool", so it can be a program name with args. ++set dummy otool; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- case $MAGIC_CMD in +-[\\/*] | ?:[\\/]*) +- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. +- ;; +-*) +- lt_save_MAGIC_CMD="$MAGIC_CMD" +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +- ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" +- for ac_dir in $ac_dummy; do +- IFS="$lt_save_ifs" +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/file; then +- lt_cv_path_MAGIC_CMD="$ac_dir/file" +- if test -n "$file_magic_test_file"; then +- case $deplibs_check_method in +- "file_magic "*) +- file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` +- MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | +- $EGREP "$file_magic_regex" > /dev/null; then +- : +- else +- cat <&2 +- +-*** Warning: the command libtool uses to detect shared libraries, +-*** $file_magic_cmd, produces output that libtool cannot recognize. +-*** The result is that libtool may fail to recognize shared libraries +-*** as such. This will affect the creation of libtool libraries that +-*** depend on shared libraries, but programs linked with such libtool +-*** libraries will work regardless of this problem. Nevertheless, you +-*** may want to report the problem to your system manager and/or to +-*** bug-libtool@gnu.org ++ if test -n "$ac_ct_OTOOL"; then ++ ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_OTOOL="otool" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS + +-EOF +- fi ;; +- esac +- fi +- break +- fi +- done +- IFS="$lt_save_ifs" +- MAGIC_CMD="$lt_save_MAGIC_CMD" +- ;; +-esac + fi +- +-MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +-if test -n "$MAGIC_CMD"; then +- { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +-echo "${ECHO_T}$MAGIC_CMD" >&6; } ++fi ++ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL ++if test -n "$ac_ct_OTOOL"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5 ++echo "${ECHO_T}$ac_ct_OTOOL" >&6; } + else + { echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6; } + fi + ++ if test "x$ac_ct_OTOOL" = x; then ++ OTOOL=":" + else +- MAGIC_CMD=: ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ OTOOL=$ac_ct_OTOOL + fi ++else ++ OTOOL="$ac_cv_prog_OTOOL" + fi + +- fi +- ;; +-esac +- +-enable_dlopen=no +-enable_win32_dll=no +- +-# Check whether --enable-libtool-lock was given. +-if test "${enable_libtool_lock+set}" = set; then +- enableval=$enable_libtool_lock; ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. ++set dummy ${ac_tool_prefix}otool64; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_OTOOL64+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$OTOOL64"; then ++ ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++OTOOL64=$ac_cv_prog_OTOOL64 ++if test -n "$OTOOL64"; then ++ { echo "$as_me:$LINENO: result: $OTOOL64" >&5 ++echo "${ECHO_T}$OTOOL64" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + ++fi ++if test -z "$ac_cv_prog_OTOOL64"; then ++ ac_ct_OTOOL64=$OTOOL64 ++ # Extract the first word of "otool64", so it can be a program name with args. ++set dummy otool64; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_OTOOL64"; then ++ ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_OTOOL64="otool64" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS + +-# Check whether --with-pic was given. +-if test "${with_pic+set}" = set; then +- withval=$with_pic; pic_mode="$withval" ++fi ++fi ++ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 ++if test -n "$ac_ct_OTOOL64"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5 ++echo "${ECHO_T}$ac_ct_OTOOL64" >&6; } + else +- pic_mode=default ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +-test -z "$pic_mode" && pic_mode=default +- +-# Use C for the default configuration in the libtool script +-tagname= +-lt_save_CC="$CC" +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu +- ++ if test "x$ac_ct_OTOOL64" = x; then ++ OTOOL64=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ OTOOL64=$ac_ct_OTOOL64 ++ fi ++else ++ OTOOL64="$ac_cv_prog_OTOOL64" ++fi + +-# Source file extension for C test sources. +-ac_ext=c + +-# Object file extension for compiled C test sources. +-objext=o +-objext=$objext + +-# Code to be used in simple compile tests +-lt_simple_compile_test_code="int some_variable = 0;" + +-# Code to be used in simple link tests +-lt_simple_link_test_code='int main(){return(0);}' + + +-# If no C compiler was specified, use CC. +-LTCC=${LTCC-"$CC"} + +-# If no C compiler flags were specified, use CFLAGS. +-LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +-# Allow CC to be a program name with arguments. +-compiler=$CC + + +-# save warnings/boilerplate of simple test code +-ac_outfile=conftest.$ac_objext +-echo "$lt_simple_compile_test_code" >conftest.$ac_ext +-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +-_lt_compiler_boilerplate=`cat conftest.err` +-$rm conftest* + +-ac_outfile=conftest.$ac_objext +-echo "$lt_simple_link_test_code" >conftest.$ac_ext +-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +-_lt_linker_boilerplate=`cat conftest.err` +-$rm conftest* + + + +-lt_prog_compiler_no_builtin_flag= + +-if test "$GCC" = yes; then +- lt_prog_compiler_no_builtin_flag=' -fno-builtin' + + +-{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; } +-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- lt_cv_prog_compiler_rtti_exceptions=no +- ac_outfile=conftest.$ac_objext +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext +- lt_compiler_flag="-fno-rtti -fno-exceptions" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- # The option is referenced via a variable to avoid confusing sed. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ +- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:7472: $lt_compile\"" >&5) +- (eval "$lt_compile" 2>conftest.err) +- ac_status=$? +- cat conftest.err >&5 +- echo "$as_me:7476: \$? = $ac_status" >&5 +- if (exit $ac_status) && test -s "$ac_outfile"; then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings other than the usual output. +- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp +- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 +- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then +- lt_cv_prog_compiler_rtti_exceptions=yes +- fi +- fi +- $rm conftest* + +-fi +-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +-echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; } + +-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then +- lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" +-else +- : +-fi + +-fi + +-lt_prog_compiler_wl= +-lt_prog_compiler_pic= +-lt_prog_compiler_static= + +-{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } + +- if test "$GCC" = yes; then +- lt_prog_compiler_wl='-Wl,' +- lt_prog_compiler_static='-static' + +- case $host_os in +- aix*) +- # All AIX code is PIC. +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- lt_prog_compiler_static='-Bstatic' +- fi +- ;; + +- amigaos*) +- # FIXME: we need at least 68020 code to build shared libraries, but +- # adding the `-m68020' flag to GCC prevents building anything better, +- # like `-m68040'. +- lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' +- ;; + +- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) +- # PIC is the default for these OSes. +- ;; + +- mingw* | cygwin* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- # Although the cygwin gcc ignores -fPIC, still need this for old-style +- # (--disable-auto-import) libraries +- lt_prog_compiler_pic='-DDLL_EXPORT' +- ;; ++ { echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 ++echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6; } ++if test "${lt_cv_apple_cc_single_mod+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_apple_cc_single_mod=no ++ if test -z "${LT_MULTI_MODULE}"; then ++ # By default we will add the -single_module flag. You can override ++ # by either setting the environment variable LT_MULTI_MODULE ++ # non-empty at configure time, or by adding -multi_module to the ++ # link flags. ++ rm -rf libconftest.dylib* ++ echo "int foo(void){return 1;}" > conftest.c ++ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ ++-dynamiclib -Wl,-single_module conftest.c" >&5 ++ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ ++ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err ++ _lt_result=$? ++ if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then ++ lt_cv_apple_cc_single_mod=yes ++ else ++ cat conftest.err >&5 ++ fi ++ rm -rf libconftest.dylib* ++ rm -f conftest.* ++ fi ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 ++echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6; } ++ { echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 ++echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6; } ++if test "${lt_cv_ld_exported_symbols_list+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_ld_exported_symbols_list=no ++ save_LDFLAGS=$LDFLAGS ++ echo "_main" > conftest.sym ++ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +- darwin* | rhapsody*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- lt_prog_compiler_pic='-fno-common' +- ;; ++int ++main () ++{ + +- interix[3-9]*) +- # Interix 3.x gcc -fpic/-fPIC options generate broken code. +- # Instead, we relocate shared libraries at runtime. +- ;; ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ lt_cv_ld_exported_symbols_list=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +- msdosdjgpp*) +- # Just because we use GCC doesn't mean we suddenly get shared libraries +- # on systems that don't support them. +- lt_prog_compiler_can_build_shared=no +- enable_shared=no +- ;; ++ lt_cv_ld_exported_symbols_list=no ++fi + +- sysv4*MP*) +- if test -d /usr/nec; then +- lt_prog_compiler_pic=-Kconform_pic +- fi +- ;; ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ LDFLAGS="$save_LDFLAGS" + +- hpux*) +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case $host_cpu in +- hppa*64*|ia64*) +- # +Z the default +- ;; +- *) +- lt_prog_compiler_pic='-fPIC' +- ;; ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 ++echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6; } ++ case $host_os in ++ rhapsody* | darwin1.[012]) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; ++ darwin1.*) ++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; ++ darwin*) # darwin 5.x on ++ # if running on 10.5 or later, the deployment target defaults ++ # to the OS version, if on x86, and 10.4, the deployment ++ # target defaults to 10.4. Don't you love it? ++ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in ++ 10.0,*86*-darwin8*|10.0,*-darwin[91]*) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; ++ 10.[012]*) ++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; ++ 10.*) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + esac +- ;; ++ ;; ++ esac ++ if test "$lt_cv_apple_cc_single_mod" = "yes"; then ++ _lt_dar_single_mod='$single_module' ++ fi ++ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then ++ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' ++ else ++ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ fi ++ if test "$DSYMUTIL" != ":"; then ++ _lt_dsymutil='~$DSYMUTIL $lib || :' ++ else ++ _lt_dsymutil= ++ fi ++ ;; ++ esac + +- *) +- lt_prog_compiler_pic='-fPIC' +- ;; +- esac +- else +- # PORTME Check for flag to pass linker flags through the system compiler. +- case $host_os in +- aix*) +- lt_prog_compiler_wl='-Wl,' +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- lt_prog_compiler_static='-Bstatic' +- else +- lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' +- fi +- ;; +- darwin*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- case $cc_basename in +- xlc*) +- lt_prog_compiler_pic='-qnocommon' +- lt_prog_compiler_wl='-Wl,' +- ;; +- esac +- ;; +- +- mingw* | cygwin* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- lt_prog_compiler_pic='-DDLL_EXPORT' +- ;; +- +- hpux9* | hpux10* | hpux11*) +- lt_prog_compiler_wl='-Wl,' +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case $host_cpu in +- hppa*64*|ia64*) +- # +Z the default +- ;; +- *) +- lt_prog_compiler_pic='+Z' +- ;; +- esac +- # Is there a better lt_prog_compiler_static that works with the bundled CC? +- lt_prog_compiler_static='${wl}-a ${wl}archive' +- ;; +- +- irix5* | irix6* | nonstopux*) +- lt_prog_compiler_wl='-Wl,' +- # PIC (with -KPIC) is the default. +- lt_prog_compiler_static='-non_shared' +- ;; +- +- newsos6) +- lt_prog_compiler_pic='-KPIC' +- lt_prog_compiler_static='-Bstatic' +- ;; +- +- linux* | k*bsd*-gnu) +- case $cc_basename in +- icc* | ecc*) +- lt_prog_compiler_wl='-Wl,' +- lt_prog_compiler_pic='-KPIC' +- lt_prog_compiler_static='-static' +- ;; +- pgcc* | pgf77* | pgf90* | pgf95*) +- # Portland Group compilers (*not* the Pentium gcc compiler, +- # which looks to be a dead project) +- lt_prog_compiler_wl='-Wl,' +- lt_prog_compiler_pic='-fpic' +- lt_prog_compiler_static='-Bstatic' +- ;; +- ccc*) +- lt_prog_compiler_wl='-Wl,' +- # All Alpha code is PIC. +- lt_prog_compiler_static='-non_shared' +- ;; +- *) +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) +- # Sun C 5.9 +- lt_prog_compiler_pic='-KPIC' +- lt_prog_compiler_static='-Bstatic' +- lt_prog_compiler_wl='-Wl,' +- ;; +- *Sun\ F*) +- # Sun Fortran 8.3 passes all unrecognized flags to the linker +- lt_prog_compiler_pic='-KPIC' +- lt_prog_compiler_static='-Bstatic' +- lt_prog_compiler_wl='' +- ;; +- esac +- ;; +- esac +- ;; +- +- osf3* | osf4* | osf5*) +- lt_prog_compiler_wl='-Wl,' +- # All OSF/1 code is PIC. +- lt_prog_compiler_static='-non_shared' +- ;; +- +- rdos*) +- lt_prog_compiler_static='-non_shared' +- ;; +- +- solaris*) +- lt_prog_compiler_pic='-KPIC' +- lt_prog_compiler_static='-Bstatic' +- case $cc_basename in +- f77* | f90* | f95*) +- lt_prog_compiler_wl='-Qoption ld ';; +- *) +- lt_prog_compiler_wl='-Wl,';; +- esac +- ;; +- +- sunos4*) +- lt_prog_compiler_wl='-Qoption ld ' +- lt_prog_compiler_pic='-PIC' +- lt_prog_compiler_static='-Bstatic' +- ;; +- +- sysv4 | sysv4.2uw2* | sysv4.3*) +- lt_prog_compiler_wl='-Wl,' +- lt_prog_compiler_pic='-KPIC' +- lt_prog_compiler_static='-Bstatic' +- ;; +- +- sysv4*MP*) +- if test -d /usr/nec ;then +- lt_prog_compiler_pic='-Kconform_pic' +- lt_prog_compiler_static='-Bstatic' +- fi +- ;; +- +- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) +- lt_prog_compiler_wl='-Wl,' +- lt_prog_compiler_pic='-KPIC' +- lt_prog_compiler_static='-Bstatic' +- ;; +- +- unicos*) +- lt_prog_compiler_wl='-Wl,' +- lt_prog_compiler_can_build_shared=no +- ;; +- +- uts4*) +- lt_prog_compiler_pic='-pic' +- lt_prog_compiler_static='-Bstatic' +- ;; +- +- *) +- lt_prog_compiler_can_build_shared=no +- ;; +- esac +- fi +- +-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic" >&6; } +- +-# +-# Check to make sure the PIC flag actually works. +-# +-if test -n "$lt_prog_compiler_pic"; then +- +-{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; } +-if test "${lt_prog_compiler_pic_works+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- lt_prog_compiler_pic_works=no +- ac_outfile=conftest.$ac_objext +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext +- lt_compiler_flag="$lt_prog_compiler_pic -DPIC" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- # The option is referenced via a variable to avoid confusing sed. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ +- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:7762: $lt_compile\"" >&5) +- (eval "$lt_compile" 2>conftest.err) +- ac_status=$? +- cat conftest.err >&5 +- echo "$as_me:7766: \$? = $ac_status" >&5 +- if (exit $ac_status) && test -s "$ac_outfile"; then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings other than the usual output. +- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp +- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 +- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then +- lt_prog_compiler_pic_works=yes +- fi +- fi +- $rm conftest* +- +-fi +-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6; } +- +-if test x"$lt_prog_compiler_pic_works" = xyes; then +- case $lt_prog_compiler_pic in +- "" | " "*) ;; +- *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; +- esac +-else +- lt_prog_compiler_pic= +- lt_prog_compiler_can_build_shared=no +-fi +- +-fi +-case $host_os in +- # For platforms which do not support PIC, -DPIC is meaningless: +- *djgpp*) +- lt_prog_compiler_pic= +- ;; +- *) +- lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" +- ;; +-esac +- +-# +-# Check to make sure the static flag actually works. +-# +-wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" +-{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } +-if test "${lt_prog_compiler_static_works+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- lt_prog_compiler_static_works=no +- save_LDFLAGS="$LDFLAGS" +- LDFLAGS="$LDFLAGS $lt_tmp_static_flag" +- echo "$lt_simple_link_test_code" > conftest.$ac_ext +- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then +- # The linker can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test -s conftest.err; then +- # Append any errors to the config.log. +- cat conftest.err 1>&5 +- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp +- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 +- if diff conftest.exp conftest.er2 >/dev/null; then +- lt_prog_compiler_static_works=yes +- fi +- else +- lt_prog_compiler_static_works=yes +- fi +- fi +- $rm conftest* +- LDFLAGS="$save_LDFLAGS" +- +-fi +-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5 +-echo "${ECHO_T}$lt_prog_compiler_static_works" >&6; } +- +-if test x"$lt_prog_compiler_static_works" = xyes; then +- : +-else +- lt_prog_compiler_static= ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 ++echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; } ++# On Suns, sometimes $CPP names a directory. ++if test -n "$CPP" && test -d "$CPP"; then ++ CPP= + fi +- +- +-{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } +-if test "${lt_cv_prog_compiler_c_o+set}" = set; then ++if test -z "$CPP"; then ++ if test "${ac_cv_prog_CPP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- lt_cv_prog_compiler_c_o=no +- $rm -r conftest 2>/dev/null +- mkdir conftest +- cd conftest +- mkdir out +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext +- +- lt_compiler_flag="-o out/conftest2.$ac_objext" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ +- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:7866: $lt_compile\"" >&5) +- (eval "$lt_compile" 2>out/conftest.err) +- ac_status=$? +- cat out/conftest.err >&5 +- echo "$as_me:7870: \$? = $ac_status" >&5 +- if (exit $ac_status) && test -s out/conftest2.$ac_objext +- then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp +- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 +- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then +- lt_cv_prog_compiler_c_o=yes +- fi +- fi +- chmod u+w . 2>&5 +- $rm conftest* +- # SGI C++ compiler will create directory out/ii_files/ for +- # template instantiation +- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files +- $rm out/* && rmdir out +- cd .. +- rmdir conftest +- $rm conftest* +- +-fi +-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 +-echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } +- +- +-hard_links="nottested" +-if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then +- # do not overwrite the value of need_locks provided by the user +- { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } +- hard_links=yes +- $rm conftest* +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- touch conftest.a +- ln conftest.a conftest.b 2>&5 || hard_links=no +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- { echo "$as_me:$LINENO: result: $hard_links" >&5 +-echo "${ECHO_T}$hard_links" >&6; } +- if test "$hard_links" = no; then +- { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} +- need_locks=warn +- fi +-else +- need_locks=no +-fi +- +-{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } +- +- runpath_var= +- allow_undefined_flag= +- enable_shared_with_static_runtimes=no +- archive_cmds= +- archive_expsym_cmds= +- old_archive_From_new_cmds= +- old_archive_from_expsyms_cmds= +- export_dynamic_flag_spec= +- whole_archive_flag_spec= +- thread_safe_flag_spec= +- hardcode_libdir_flag_spec= +- hardcode_libdir_flag_spec_ld= +- hardcode_libdir_separator= +- hardcode_direct=no +- hardcode_minus_L=no +- hardcode_shlibpath_var=unsupported +- link_all_deplibs=unknown +- hardcode_automatic=no +- module_cmds= +- module_expsym_cmds= +- always_export_symbols=no +- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- # include_expsyms should be a list of space-separated symbols to be *always* +- # included in the symbol list +- include_expsyms= +- # exclude_expsyms can be an extended regexp of symbols to exclude +- # it will be wrapped by ` (' and `)$', so one must not match beginning or +- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', +- # as well as any symbol that contains `d'. +- exclude_expsyms="_GLOBAL_OFFSET_TABLE_" +- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out +- # platforms (ab)use it in PIC code, but their linkers get confused if +- # the symbol is explicitly referenced. Since portable code cannot +- # rely on this symbol name, it's probably fine to never include it in +- # preloaded symbol tables. +- extract_expsyms_cmds= +- # Just being paranoid about ensuring that cc_basename is set. +- for cc_temp in $compiler""; do +- case $cc_temp in +- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; +- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; +- \-*) ;; +- *) break;; +- esac +-done +-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` +- +- case $host_os in +- cygwin* | mingw* | pw32*) +- # FIXME: the MSVC++ port hasn't been tested in a loooong time +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- if test "$GCC" != yes; then +- with_gnu_ld=no +- fi +- ;; +- interix*) +- # we just hope/assume this is gcc and not c89 (= MSVC++) +- with_gnu_ld=yes +- ;; +- openbsd*) +- with_gnu_ld=no +- ;; +- esac +- +- ld_shlibs=yes +- if test "$with_gnu_ld" = yes; then +- # If archive_cmds runs LD, not CC, wlarc should be empty +- wlarc='${wl}' +- +- # Set some defaults for GNU ld with shared library support. These +- # are reset later if shared libraries are not supported. Putting them +- # here allows them to be overridden if necessary. +- runpath_var=LD_RUN_PATH +- hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' +- export_dynamic_flag_spec='${wl}--export-dynamic' +- # ancient GNU ld didn't support --whole-archive et. al. +- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then +- whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- else +- whole_archive_flag_spec= +- fi +- supports_anon_versioning=no +- case `$LD -v 2>/dev/null` in +- *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 +- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... +- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... +- *\ 2.11.*) ;; # other 2.11 versions +- *) supports_anon_versioning=yes ;; +- esac +- +- # See if GNU ld supports shared libraries. +- case $host_os in +- aix3* | aix4* | aix5*) +- # On AIX/PPC, the GNU linker is very broken +- if test "$host_cpu" != ia64; then +- ld_shlibs=no +- cat <&2 +- +-*** Warning: the GNU linker, at least up to release 2.9.1, is reported +-*** to be unable to reliably create shared libraries on AIX. +-*** Therefore, libtool is disabling shared libraries support. If you +-*** really care for shared libraries, you may want to modify your PATH +-*** so that a non-GNU linker is found, and then restart. +- +-EOF +- fi +- ;; +- +- amigaos*) +- archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_minus_L=yes +- +- # Samuel A. Falvo II reports +- # that the semantics of dynamic libraries on AmigaOS, at least up +- # to version 4, is to share data among multiple programs linked +- # with the same dynamic library. Since this doesn't match the +- # behavior of shared libraries on other platforms, we can't use +- # them. +- ld_shlibs=no +- ;; +- +- beos*) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- allow_undefined_flag=unsupported +- # Joseph Beckenbach says some releases of gcc +- # support --undefined. This deserves some investigation. FIXME +- archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- else +- ld_shlibs=no +- fi +- ;; +- +- cygwin* | mingw* | pw32*) +- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, +- # as there is no search path for DLLs. +- hardcode_libdir_flag_spec='-L$libdir' +- allow_undefined_flag=unsupported +- always_export_symbols=no +- enable_shared_with_static_runtimes=yes +- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' +- +- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- # If the export-symbols file already is a .def file (1st line +- # is EXPORTS), use it as is; otherwise, prepend... +- archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +- cp $export_symbols $output_objdir/$soname.def; +- else +- echo EXPORTS > $output_objdir/$soname.def; +- cat $export_symbols >> $output_objdir/$soname.def; +- fi~ +- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- else +- ld_shlibs=no +- fi +- ;; +- +- interix[3-9]*) +- hardcode_direct=no +- hardcode_shlibpath_var=no +- hardcode_libdir_flag_spec='${wl}-rpath,$libdir' +- export_dynamic_flag_spec='${wl}-E' +- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. +- # Instead, shared libraries are loaded at an image base (0x10000000 by +- # default) and relocated if they conflict, which is a slow very memory +- # consuming and fragmenting process. To avoid this, we pick a random, +- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link +- # time. Moving up from 0x10000000 also allows more sbrk(2) space. +- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' +- archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' +- ;; +- +- gnu* | linux* | k*bsd*-gnu) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- tmp_addflag= +- case $cc_basename,$host_cpu in +- pgcc*) # Portland Group C compiler +- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- tmp_addflag=' $pic_flag' +- ;; +- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers +- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- tmp_addflag=' $pic_flag -Mnomain' ;; +- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 +- tmp_addflag=' -i_dynamic' ;; +- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 +- tmp_addflag=' -i_dynamic -nofor_main' ;; +- ifc* | ifort*) # Intel Fortran compiler +- tmp_addflag=' -nofor_main' ;; +- esac +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) # Sun C 5.9 +- whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- tmp_sharedflag='-G' ;; +- *Sun\ F*) # Sun Fortran 8.3 +- tmp_sharedflag='-G' ;; +- *) +- tmp_sharedflag='-shared' ;; +- esac +- archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- +- if test $supports_anon_versioning = yes; then +- archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~ +- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ +- $echo "local: *; };" >> $output_objdir/$libname.ver~ +- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' +- fi +- else +- ld_shlibs=no +- fi +- ;; +- +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' +- wlarc= +- else +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- fi +- ;; +- +- solaris*) +- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then +- ld_shlibs=no +- cat <&2 +- +-*** Warning: The releases 2.8.* of the GNU linker cannot reliably +-*** create shared libraries on Solaris systems. Therefore, libtool +-*** is disabling shared libraries support. We urge you to upgrade GNU +-*** binutils to release 2.9.1 or newer. Another option is to modify +-*** your PATH or compiler configuration so that the native linker is +-*** used, and then restart. +- +-EOF +- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- ld_shlibs=no +- fi +- ;; +- +- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) +- case `$LD -v 2>&1` in +- *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) +- ld_shlibs=no +- cat <<_LT_EOF 1>&2 +- +-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +-*** reliably create shared libraries on SCO systems. Therefore, libtool +-*** is disabling shared libraries support. We urge you to upgrade GNU +-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +-*** your PATH or compiler configuration so that the native linker is +-*** used, and then restart. +- +-_LT_EOF +- ;; +- *) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' +- else +- ld_shlibs=no +- fi +- ;; +- esac +- ;; +- +- sunos4*) +- archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- wlarc= +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- ;; +- +- *) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- ld_shlibs=no +- fi +- ;; +- esac +- +- if test "$ld_shlibs" = no; then +- runpath_var= +- hardcode_libdir_flag_spec= +- export_dynamic_flag_spec= +- whole_archive_flag_spec= +- fi +- else +- # PORTME fill in a description of your system's linker (not GNU ld) +- case $host_os in +- aix3*) +- allow_undefined_flag=unsupported +- always_export_symbols=yes +- archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' +- # Note: this linker hardcodes the directories in LIBPATH if there +- # are no directories specified by -L. +- hardcode_minus_L=yes +- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then +- # Neither direct hardcoding nor static linking is supported with a +- # broken collect2. +- hardcode_direct=unsupported +- fi +- ;; +- +- aix4* | aix5*) +- if test "$host_cpu" = ia64; then +- # On IA64, the linker does run time linking by default, so we don't +- # have to do anything special. +- aix_use_runtimelinking=no +- exp_sym_flag='-Bexport' +- no_entry_flag="" +- else +- # If we're using GNU nm, then we don't want the "-C" option. +- # -C means demangle to AIX nm, but means don't demangle with GNU nm +- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then +- export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' +- else +- export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' +- fi +- aix_use_runtimelinking=no +- +- # Test if we are trying to use run time linking or normal +- # AIX style linking. If -brtl is somewhere in LDFLAGS, we +- # need to do runtime linking. +- case $host_os in aix4.[23]|aix4.[23].*|aix5*) +- for ld_flag in $LDFLAGS; do +- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then +- aix_use_runtimelinking=yes +- break +- fi +- done +- ;; +- esac +- +- exp_sym_flag='-bexport' +- no_entry_flag='-bnoentry' +- fi +- +- # When large executables or shared objects are built, AIX ld can +- # have problems creating the table of contents. If linking a library +- # or program results in "error TOC overflow" add -mminimal-toc to +- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not +- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. +- +- archive_cmds='' +- hardcode_direct=yes +- hardcode_libdir_separator=':' +- link_all_deplibs=yes +- +- if test "$GCC" = yes; then +- case $host_os in aix4.[012]|aix4.[012].*) +- # We only want to do this on AIX 4.2 and lower, the check +- # below for broken collect2 doesn't work under 4.3+ +- collect2name=`${CC} -print-prog-name=collect2` +- if test -f "$collect2name" && \ +- strings "$collect2name" | grep resolve_lib_name >/dev/null +- then +- # We have reworked collect2 +- : +- else +- # We have old collect2 +- hardcode_direct=unsupported +- # It fails to find uninstalled libraries when the uninstalled +- # path is not listed in the libpath. Setting hardcode_minus_L +- # to unsupported forces relinking +- hardcode_minus_L=yes +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_libdir_separator= +- fi +- ;; +- esac +- shared_flag='-shared' +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag="$shared_flag "'${wl}-G' +- fi +- else +- # not using gcc +- if test "$host_cpu" = ia64; then +- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release +- # chokes on -Wl,-G. The following line is correct: +- shared_flag='-G' +- else +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag='${wl}-G' +- else +- shared_flag='${wl}-bM:SRE' +- fi +- fi +- fi +- +- # It seems that -bexpall does not export symbols beginning with +- # underscore (_), so it is better to generate a list of symbols to export. +- always_export_symbols=yes +- if test "$aix_use_runtimelinking" = yes; then +- # Warning - without using the other runtime loading flags (-brtl), +- # -berok will link without error, but may produce a broken library. +- allow_undefined_flag='-berok' +- # Determine the default libpath from the value encoded in an empty executable. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-int +-main () +-{ +- +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *\(.*\)$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +- +- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" +- archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" +- else +- if test "$host_cpu" = ia64; then +- hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' +- allow_undefined_flag="-z nodefs" +- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" +- else +- # Determine the default libpath from the value encoded in an empty executable. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-int +-main () +-{ +- +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *\(.*\)$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +- +- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" +- # Warning - without using the other run time loading flags, +- # -berok will link without error, but may produce a broken library. +- no_undefined_flag=' ${wl}-bernotok' +- allow_undefined_flag=' ${wl}-berok' +- # Exported symbols can be pulled into shared objects from archives +- whole_archive_flag_spec='$convenience' +- archive_cmds_need_lc=yes +- # This is similar to how AIX traditionally builds its shared libraries. +- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' +- fi +- fi +- ;; +- +- amigaos*) +- archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_minus_L=yes +- # see comment about different semantics on the GNU ld section +- ld_shlibs=no +- ;; +- +- bsdi[45]*) +- export_dynamic_flag_spec=-rdynamic +- ;; +- +- cygwin* | mingw* | pw32*) +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- # hardcode_libdir_flag_spec is actually meaningless, as there is +- # no search path for DLLs. +- hardcode_libdir_flag_spec=' ' +- allow_undefined_flag=unsupported +- # Tell ltmain to make .lib files, not .a files. +- libext=lib +- # Tell ltmain to make .dll files, not .so files. +- shrext_cmds=".dll" +- # FIXME: Setting linknames here is a bad hack. +- archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' +- # The linker will automatically build a .lib file if we build a DLL. +- old_archive_From_new_cmds='true' +- # FIXME: Should let the user specify the lib program. +- old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' +- fix_srcfile_path='`cygpath -w "$srcfile"`' +- enable_shared_with_static_runtimes=yes +- ;; +- +- darwin* | rhapsody*) +- case $host_os in +- rhapsody* | darwin1.[012]) +- allow_undefined_flag='${wl}-undefined ${wl}suppress' +- ;; +- *) # Darwin 1.3 on +- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then +- allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' +- else +- case ${MACOSX_DEPLOYMENT_TARGET} in +- 10.[012]) +- allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' +- ;; +- 10.*) +- allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup' +- ;; +- esac +- fi +- ;; +- esac +- archive_cmds_need_lc=no +- hardcode_direct=no +- hardcode_automatic=yes +- hardcode_shlibpath_var=unsupported +- whole_archive_flag_spec='' +- link_all_deplibs=yes +- if test "$GCC" = yes ; then +- output_verbose_link_cmd='echo' +- archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds +- archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- else +- case $cc_basename in +- xlc*) +- output_verbose_link_cmd='echo' +- archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' +- module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds +- archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- ;; +- *) +- ld_shlibs=no +- ;; +- esac +- fi +- ;; +- +- dgux*) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_shlibpath_var=no +- ;; +- +- freebsd1*) +- ld_shlibs=no +- ;; +- +- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor +- # support. Future versions do this automatically, but an explicit c++rt0.o +- # does not break anything, and helps significantly (at the cost of a little +- # extra space). +- freebsd2.2*) +- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' +- hardcode_libdir_flag_spec='-R$libdir' +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- ;; +- +- # Unfortunately, older versions of FreeBSD 2 do not have this feature. +- freebsd2*) +- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct=yes +- hardcode_minus_L=yes +- hardcode_shlibpath_var=no +- ;; +- +- # FreeBSD 3 and greater uses gcc -shared to do shared libraries. +- freebsd* | dragonfly*) +- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec='-R$libdir' +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- ;; +- +- hpux9*) +- if test "$GCC" = yes; then +- archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- else +- archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- fi +- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator=: +- hardcode_direct=yes +- +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- hardcode_minus_L=yes +- export_dynamic_flag_spec='${wl}-E' +- ;; +- +- hpux10*) +- if test "$GCC" = yes -a "$with_gnu_ld" = no; then +- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' +- fi +- if test "$with_gnu_ld" = no; then +- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator=: +- +- hardcode_direct=yes +- export_dynamic_flag_spec='${wl}-E' +- +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- hardcode_minus_L=yes +- fi +- ;; +- +- hpux11*) +- if test "$GCC" = yes -a "$with_gnu_ld" = no; then +- case $host_cpu in +- hppa*64*) +- archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- ia64*) +- archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- esac +- else +- case $host_cpu in +- hppa*64*) +- archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- ia64*) +- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- esac +- fi +- if test "$with_gnu_ld" = no; then +- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator=: +- +- case $host_cpu in +- hppa*64*|ia64*) +- hardcode_libdir_flag_spec_ld='+b $libdir' +- hardcode_direct=no +- hardcode_shlibpath_var=no +- ;; +- *) +- hardcode_direct=yes +- export_dynamic_flag_spec='${wl}-E' +- +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- hardcode_minus_L=yes +- ;; +- esac +- fi +- ;; +- +- irix5* | irix6* | nonstopux*) +- if test "$GCC" = yes; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- hardcode_libdir_flag_spec_ld='-rpath $libdir' +- fi +- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator=: +- link_all_deplibs=yes +- ;; +- +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out +- else +- archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF +- fi +- hardcode_libdir_flag_spec='-R$libdir' +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- ;; +- +- newsos6) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct=yes +- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator=: +- hardcode_shlibpath_var=no +- ;; +- +- openbsd*) +- if test -f /usr/libexec/ld.so; then +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' +- hardcode_libdir_flag_spec='${wl}-rpath,$libdir' +- export_dynamic_flag_spec='${wl}-E' +- else +- case $host_os in +- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) +- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec='-R$libdir' +- ;; +- *) +- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec='${wl}-rpath,$libdir' +- ;; +- esac +- fi +- else +- ld_shlibs=no +- fi +- ;; +- +- os2*) +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_minus_L=yes +- allow_undefined_flag=unsupported +- archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' +- old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' +- ;; +- +- osf3*) +- if test "$GCC" = yes; then +- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- allow_undefined_flag=' -expect_unresolved \*' +- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- fi +- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator=: +- ;; +- +- osf4* | osf5*) # as osf3* with the addition of -msym flag +- if test "$GCC" = yes; then +- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' +- else +- allow_undefined_flag=' -expect_unresolved \*' +- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ +- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' +- +- # Both c and cxx compiler support -rpath directly +- hardcode_libdir_flag_spec='-rpath $libdir' +- fi +- hardcode_libdir_separator=: +- ;; +- +- solaris*) +- no_undefined_flag=' -z text' +- if test "$GCC" = yes; then +- wlarc='${wl}' +- archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' +- else +- wlarc='' +- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' +- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +- fi +- hardcode_libdir_flag_spec='-R$libdir' +- hardcode_shlibpath_var=no +- case $host_os in +- solaris2.[0-5] | solaris2.[0-5].*) ;; +- *) +- # The compiler driver will combine and reorder linker options, +- # but understands `-z linker_flag'. GCC discards it without `$wl', +- # but is careful enough not to reorder. +- # Supported since Solaris 2.6 (maybe 2.5.1?) +- if test "$GCC" = yes; then +- whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' +- else +- whole_archive_flag_spec='-z allextract$convenience -z defaultextract' +- fi +- ;; +- esac +- link_all_deplibs=yes +- ;; +- +- sunos4*) +- if test "x$host_vendor" = xsequent; then +- # Use $CC to link under sequent, because it throws in some extra .o +- # files that make .init and .fini sections work. +- archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' +- fi +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_direct=yes +- hardcode_minus_L=yes +- hardcode_shlibpath_var=no +- ;; +- +- sysv4) +- case $host_vendor in +- sni) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct=yes # is this really true??? +- ;; +- siemens) +- ## LD is ld it makes a PLAMLIB +- ## CC just makes a GrossModule. +- archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' +- reload_cmds='$CC -r -o $output$reload_objs' +- hardcode_direct=no +- ;; +- motorola) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct=no #Motorola manual says yes, but my tests say they lie +- ;; +- esac +- runpath_var='LD_RUN_PATH' +- hardcode_shlibpath_var=no +- ;; +- +- sysv4.3*) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var=no +- export_dynamic_flag_spec='-Bexport' +- ;; +- +- sysv4*MP*) +- if test -d /usr/nec; then +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var=no +- runpath_var=LD_RUN_PATH +- hardcode_runpath_var=yes +- ld_shlibs=yes +- fi +- ;; +- +- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) +- no_undefined_flag='${wl}-z,text' +- archive_cmds_need_lc=no +- hardcode_shlibpath_var=no +- runpath_var='LD_RUN_PATH' +- +- if test "$GCC" = yes; then +- archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- fi +- ;; +- +- sysv5* | sco3.2v5* | sco5v6*) +- # Note: We can NOT use -z defs as we might desire, because we do not +- # link with -lc, and that would cause any symbols used from libc to +- # always be unresolved, which means just about no library would +- # ever link correctly. If we're not using GNU ld we use -z text +- # though, which does catch some bad symbols but isn't as heavy-handed +- # as -z defs. +- no_undefined_flag='${wl}-z,text' +- allow_undefined_flag='${wl}-z,nodefs' +- archive_cmds_need_lc=no +- hardcode_shlibpath_var=no +- hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' +- hardcode_libdir_separator=':' +- link_all_deplibs=yes +- export_dynamic_flag_spec='${wl}-Bexport' +- runpath_var='LD_RUN_PATH' +- +- if test "$GCC" = yes; then +- archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- fi +- ;; +- +- uts4*) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_shlibpath_var=no +- ;; +- +- *) +- ld_shlibs=no +- ;; +- esac +- fi +- +-{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5 +-echo "${ECHO_T}$ld_shlibs" >&6; } +-test "$ld_shlibs" = no && can_build_shared=no +- +-# +-# Do we need to explicitly link libc? +-# +-case "x$archive_cmds_need_lc" in +-x|xyes) +- # Assume -lc should be added +- archive_cmds_need_lc=yes +- +- if test "$enable_shared" = yes && test "$GCC" = yes; then +- case $archive_cmds in +- *'~'*) +- # FIXME: we may have to deal with multi-command sequences. +- ;; +- '$CC '*) +- # Test whether the compiler implicitly links with -lc since on some +- # systems, -lgcc has to come before -lc. If gcc already passes -lc +- # to ld, don't add -lc before -lgcc. +- { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } +- $rm conftest* +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext +- +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } 2>conftest.err; then +- soname=conftest +- lib=conftest +- libobjs=conftest.$ac_objext +- deplibs= +- wl=$lt_prog_compiler_wl +- pic_flag=$lt_prog_compiler_pic +- compiler_flags=-v +- linker_flags=-v +- verstring= +- output_objdir=. +- libname=conftest +- lt_save_allow_undefined_flag=$allow_undefined_flag +- allow_undefined_flag= +- if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 +- (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +- then +- archive_cmds_need_lc=no +- else +- archive_cmds_need_lc=yes +- fi +- allow_undefined_flag=$lt_save_allow_undefined_flag +- else +- cat conftest.err 1>&5 +- fi +- $rm conftest* +- { echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 +-echo "${ECHO_T}$archive_cmds_need_lc" >&6; } +- ;; +- esac +- fi +- ;; +-esac +- +-{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } +-library_names_spec= +-libname_spec='lib$name' +-soname_spec= +-shrext_cmds=".so" +-postinstall_cmds= +-postuninstall_cmds= +-finish_cmds= +-finish_eval= +-shlibpath_var= +-shlibpath_overrides_runpath=unknown +-version_type=none +-dynamic_linker="$host_os ld.so" +-sys_lib_dlsearch_path_spec="/lib /usr/lib" +- +-if test "$GCC" = yes; then +- case $host_os in +- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; +- *) lt_awk_arg="/^libraries:/" ;; +- esac +- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then +- # if the path contains ";" then we assume it to be the separator +- # otherwise default to the standard path separator (i.e. ":") - it is +- # assumed that no part of a normal pathname contains ";" but that should +- # okay in the real world where ";" in dirpaths is itself problematic. +- lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'` +- else +- lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` +- fi +- # Ok, now we have the path, separated by spaces, we can step through it +- # and add multilib dir if necessary. +- lt_tmp_lt_search_path_spec= +- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` +- for lt_sys_path in $lt_search_path_spec; do +- if test -d "$lt_sys_path/$lt_multi_os_dir"; then +- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" +- else +- test -d "$lt_sys_path" && \ +- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" +- fi +- done +- lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk ' +-BEGIN {RS=" "; FS="/|\n";} { +- lt_foo=""; +- lt_count=0; +- for (lt_i = NF; lt_i > 0; lt_i--) { +- if ($lt_i != "" && $lt_i != ".") { +- if ($lt_i == "..") { +- lt_count++; +- } else { +- if (lt_count == 0) { +- lt_foo="/" $lt_i lt_foo; +- } else { +- lt_count--; +- } +- } +- } +- } +- if (lt_foo != "") { lt_freq[lt_foo]++; } +- if (lt_freq[lt_foo] == 1) { print lt_foo; } +-}'` +- sys_lib_search_path_spec=`echo $lt_search_path_spec` +-else +- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +-fi +-need_lib_prefix=unknown +-hardcode_into_libs=no +- +-# when you set need_version to no, make sure it does not cause -set_version +-# flags to be left without arguments +-need_version=unknown +- +-case $host_os in +-aix3*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' +- shlibpath_var=LIBPATH +- +- # AIX 3 has no versioning support, so we append a major version to the name. +- soname_spec='${libname}${release}${shared_ext}$major' +- ;; +- +-aix4* | aix5*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- hardcode_into_libs=yes +- if test "$host_cpu" = ia64; then +- # AIX 5 supports IA64 +- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- else +- # With GCC up to 2.95.x, collect2 would create an import file +- # for dependence libraries. The import file would start with +- # the line `#! .'. This would cause the generated library to +- # depend on `.', always an invalid library. This was fixed in +- # development snapshots of GCC prior to 3.0. +- case $host_os in +- aix4 | aix4.[01] | aix4.[01].*) +- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' +- echo ' yes ' +- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then +- : +- else +- can_build_shared=no +- fi +- ;; +- esac +- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct +- # soname into executable. Probably we can add versioning support to +- # collect2, so additional links can be useful in future. +- if test "$aix_use_runtimelinking" = yes; then +- # If using run time linking (on AIX 4.2 or later) use lib.so +- # instead of lib.a to let people know that these are not +- # typical AIX shared libraries. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- else +- # We preserve .a as extension for shared libraries through AIX4.2 +- # and later when we are not doing run time linking. +- library_names_spec='${libname}${release}.a $libname.a' +- soname_spec='${libname}${release}${shared_ext}$major' +- fi +- shlibpath_var=LIBPATH +- fi +- ;; +- +-amigaos*) +- library_names_spec='$libname.ixlibrary $libname.a' +- # Create ${libname}_ixlibrary.a entries in /sys/libs. +- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' +- ;; +- +-beos*) +- library_names_spec='${libname}${shared_ext}' +- dynamic_linker="$host_os ld.so" +- shlibpath_var=LIBRARY_PATH +- ;; +- +-bsdi[45]*) +- version_type=linux +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" +- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" +- # the default ld.so.conf also contains /usr/contrib/lib and +- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow +- # libtool to hard-code these into programs +- ;; +- +-cygwin* | mingw* | pw32*) +- version_type=windows +- shrext_cmds=".dll" +- need_version=no +- need_lib_prefix=no +- +- case $GCC,$host_os in +- yes,cygwin* | yes,mingw* | yes,pw32*) +- library_names_spec='$libname.dll.a' +- # DLL is installed to $(libdir)/../bin by postinstall_cmds +- postinstall_cmds='base_file=`basename \${file}`~ +- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ +- dldir=$destdir/`dirname \$dlpath`~ +- test -d \$dldir || mkdir -p \$dldir~ +- $install_prog $dir/$dlname \$dldir/$dlname~ +- chmod a+x \$dldir/$dlname' +- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ +- dlpath=$dir/\$dldll~ +- $rm \$dlpath' +- shlibpath_overrides_runpath=yes +- +- case $host_os in +- cygwin*) +- # Cygwin DLLs use 'cyg' prefix rather than 'lib' +- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' +- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" +- ;; +- mingw*) +- # MinGW DLLs use traditional 'lib' prefix +- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' +- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then +- # It is most probably a Windows format PATH printed by +- # mingw gcc, but we are running on Cygwin. Gcc prints its search +- # path with ; separators, and with drive letters. We can handle the +- # drive letters (cygwin fileutils understands them), so leave them, +- # especially as we might pass files found there to a mingw objdump, +- # which wouldn't understand a cygwinified path. Ahh. +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` +- else +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` +- fi +- ;; +- pw32*) +- # pw32 DLLs use 'pw' prefix rather than 'lib' +- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' +- ;; +- esac +- ;; +- +- *) +- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' +- ;; +- esac +- dynamic_linker='Win32 ld.exe' +- # FIXME: first we should search . and the directory the executable is in +- shlibpath_var=PATH +- ;; +- +-darwin* | rhapsody*) +- dynamic_linker="$host_os dyld" +- version_type=darwin +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' +- soname_spec='${libname}${release}${major}$shared_ext' +- shlibpath_overrides_runpath=yes +- shlibpath_var=DYLD_LIBRARY_PATH +- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' +- +- sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" +- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' +- ;; +- +-dgux*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- ;; +- +-freebsd1*) +- dynamic_linker=no +- ;; +- +-freebsd* | dragonfly*) +- # DragonFly does not have aout. When/if they implement a new +- # versioning mechanism, adjust this. +- if test -x /usr/bin/objformat; then +- objformat=`/usr/bin/objformat` +- else +- case $host_os in +- freebsd[123]*) objformat=aout ;; +- *) objformat=elf ;; +- esac +- fi +- version_type=freebsd-$objformat +- case $version_type in +- freebsd-elf*) +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' +- need_version=no +- need_lib_prefix=no +- ;; +- freebsd-*) +- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' +- need_version=yes +- ;; +- esac +- shlibpath_var=LD_LIBRARY_PATH +- case $host_os in +- freebsd2*) +- shlibpath_overrides_runpath=yes +- ;; +- freebsd3.[01]* | freebsdelf3.[01]*) +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; +- freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ +- freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- ;; +- *) # from 4.6 on, and DragonFly +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; +- esac +- ;; +- +-gnu*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- hardcode_into_libs=yes +- ;; +- +-hpux9* | hpux10* | hpux11*) +- # Give a soname corresponding to the major version so that dld.sl refuses to +- # link against other versions. +- version_type=sunos +- need_lib_prefix=no +- need_version=no +- case $host_cpu in +- ia64*) +- shrext_cmds='.so' +- hardcode_into_libs=yes +- dynamic_linker="$host_os dld.so" +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- if test "X$HPUX_IA64_MODE" = X32; then +- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" +- else +- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" +- fi +- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec +- ;; +- hppa*64*) +- shrext_cmds='.sl' +- hardcode_into_libs=yes +- dynamic_linker="$host_os dld.sl" +- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH +- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" +- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec +- ;; +- *) +- shrext_cmds='.sl' +- dynamic_linker="$host_os dld.sl" +- shlibpath_var=SHLIB_PATH +- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- ;; +- esac +- # HP-UX runs *really* slowly unless shared libraries are mode 555. +- postinstall_cmds='chmod 555 $lib' +- ;; +- +-interix[3-9]*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- ;; +- +-irix5* | irix6* | nonstopux*) +- case $host_os in +- nonstopux*) version_type=nonstopux ;; +- *) +- if test "$lt_cv_prog_gnu_ld" = yes; then +- version_type=linux +- else +- version_type=irix +- fi ;; +- esac +- need_lib_prefix=no +- need_version=no +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' +- case $host_os in +- irix5* | nonstopux*) +- libsuff= shlibsuff= +- ;; +- *) +- case $LD in # libtool.m4 will add one of these switches to LD +- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") +- libsuff= shlibsuff= libmagic=32-bit;; +- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") +- libsuff=32 shlibsuff=N32 libmagic=N32;; +- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") +- libsuff=64 shlibsuff=64 libmagic=64-bit;; +- *) libsuff= shlibsuff= libmagic=never-match;; +- esac +- ;; +- esac +- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" +- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" +- hardcode_into_libs=yes +- ;; +- +-# No shared lib support for Linux oldld, aout, or coff. +-linux*oldld* | linux*aout* | linux*coff*) +- dynamic_linker=no +- ;; +- +-# This must be Linux ELF. +-linux* | k*bsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- # This implies no fast_install, which is unacceptable. +- # Some rework will be needed to allow for fast_install +- # before this can be enabled. +- hardcode_into_libs=yes +- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" +- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" +- +- # Append ld.so.conf contents to the search path +- if test -f /etc/ld.so.conf; then +- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" +- fi +- +- # We used to test for /lib/ld.so.1 and disable shared libraries on +- # powerpc, because MkLinux only supported shared libraries with the +- # GNU dynamic linker. Since this was broken with cross compilers, +- # most powerpc-linux boxes support dynamic linking these days and +- # people can always --disable-shared, the test was removed, and we +- # assume the GNU/Linux dynamic linker is in use. +- dynamic_linker='GNU/Linux ld.so' +- ;; +- +-netbsd*) +- version_type=sunos +- need_lib_prefix=no +- need_version=no +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- dynamic_linker='NetBSD (a.out) ld.so' +- else +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- dynamic_linker='NetBSD ld.elf_so' +- fi +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; +- +-newsos6) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- ;; +- +-nto-qnx*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- ;; +- +-openbsd*) +- version_type=sunos +- sys_lib_dlsearch_path_spec="/usr/lib" +- need_lib_prefix=no +- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. +- case $host_os in +- openbsd3.3 | openbsd3.3.*) need_version=yes ;; +- *) need_version=no ;; +- esac +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- case $host_os in +- openbsd2.[89] | openbsd2.[89].*) +- shlibpath_overrides_runpath=no +- ;; +- *) +- shlibpath_overrides_runpath=yes +- ;; +- esac +- else +- shlibpath_overrides_runpath=yes +- fi +- ;; +- +-os2*) +- libname_spec='$name' +- shrext_cmds=".dll" +- need_lib_prefix=no +- library_names_spec='$libname${shared_ext} $libname.a' +- dynamic_linker='OS/2 ld.exe' +- shlibpath_var=LIBPATH +- ;; +- +-osf3* | osf4* | osf5*) +- version_type=osf +- need_lib_prefix=no +- need_version=no +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" +- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" +- ;; +- +-rdos*) +- dynamic_linker=no +- ;; +- +-solaris*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- # ldd complains unless libraries are executable +- postinstall_cmds='chmod +x $lib' +- ;; +- +-sunos4*) +- version_type=sunos +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- if test "$with_gnu_ld" = yes; then +- need_lib_prefix=no +- fi +- need_version=yes +- ;; +- +-sysv4 | sysv4.3*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- case $host_vendor in +- sni) +- shlibpath_overrides_runpath=no +- need_lib_prefix=no +- export_dynamic_flag_spec='${wl}-Blargedynsym' +- runpath_var=LD_RUN_PATH +- ;; +- siemens) +- need_lib_prefix=no +- ;; +- motorola) +- need_lib_prefix=no +- need_version=no +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' +- ;; +- esac +- ;; +- +-sysv4*MP*) +- if test -d /usr/nec ;then +- version_type=linux +- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' +- soname_spec='$libname${shared_ext}.$major' +- shlibpath_var=LD_LIBRARY_PATH +- fi +- ;; +- +-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) +- version_type=freebsd-elf +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- hardcode_into_libs=yes +- if test "$with_gnu_ld" = yes; then +- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' +- shlibpath_overrides_runpath=no +- else +- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' +- shlibpath_overrides_runpath=yes +- case $host_os in +- sco3.2v5*) +- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" +- ;; +- esac +- fi +- sys_lib_dlsearch_path_spec='/usr/lib' +- ;; +- +-uts4*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- ;; +- +-*) +- dynamic_linker=no +- ;; +-esac +-{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +-echo "${ECHO_T}$dynamic_linker" >&6; } +-test "$dynamic_linker" = no && can_build_shared=no +- +-variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +-if test "$GCC" = yes; then +- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +-fi +- +-{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } +-hardcode_action= +-if test -n "$hardcode_libdir_flag_spec" || \ +- test -n "$runpath_var" || \ +- test "X$hardcode_automatic" = "Xyes" ; then +- +- # We can hardcode non-existant directories. +- if test "$hardcode_direct" != no && +- # If the only mechanism to avoid hardcoding is shlibpath_var, we +- # have to relink, otherwise we might link with an installed library +- # when we should be linking with a yet-to-be-installed one +- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no && +- test "$hardcode_minus_L" != no; then +- # Linking always hardcodes the temporary library directory. +- hardcode_action=relink +- else +- # We can link without hardcoding, and we can hardcode nonexisting dirs. +- hardcode_action=immediate +- fi +-else +- # We cannot hardcode anything, or else we can only hardcode existing +- # directories. +- hardcode_action=unsupported +-fi +-{ echo "$as_me:$LINENO: result: $hardcode_action" >&5 +-echo "${ECHO_T}$hardcode_action" >&6; } +- +-if test "$hardcode_action" = relink; then +- # Fast installation is not supported +- enable_fast_install=no +-elif test "$shlibpath_overrides_runpath" = yes || +- test "$enable_shared" = no; then +- # Fast installation is not necessary +- enable_fast_install=needless +-fi +- +-striplib= +-old_striplib= +-{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 +-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; } +-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then +- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" +- test -z "$striplib" && striplib="$STRIP --strip-unneeded" +- { echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6; } +-else +-# FIXME - insert some real tests, host_os isn't really good enough +- case $host_os in +- darwin*) +- if test -n "$STRIP" ; then +- striplib="$STRIP -x" +- old_striplib="$STRIP -S" +- { echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6; } +- else +- { echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6; } +-fi +- ;; +- *) +- { echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6; } +- ;; +- esac +-fi +- +-if test "x$enable_dlopen" != xyes; then +- enable_dlopen=unknown +- enable_dlopen_self=unknown +- enable_dlopen_self_static=unknown +-else +- lt_cv_dlopen=no +- lt_cv_dlopen_libs= +- +- case $host_os in +- beos*) +- lt_cv_dlopen="load_add_on" +- lt_cv_dlopen_libs= +- lt_cv_dlopen_self=yes +- ;; +- +- mingw* | pw32*) +- lt_cv_dlopen="LoadLibrary" +- lt_cv_dlopen_libs= +- ;; +- +- cygwin*) +- lt_cv_dlopen="dlopen" +- lt_cv_dlopen_libs= +- ;; +- +- darwin*) +- # if libdl is installed we need to link against it +- { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } +-if test "${ac_cv_lib_dl_dlopen+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldl $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char dlopen (); +-int +-main () +-{ +-return dlopen (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- ac_cv_lib_dl_dlopen=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_dl_dlopen=no +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } +-if test $ac_cv_lib_dl_dlopen = yes; then +- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +-else +- +- lt_cv_dlopen="dyld" +- lt_cv_dlopen_libs= +- lt_cv_dlopen_self=yes +- +-fi +- +- ;; +- +- *) +- { echo "$as_me:$LINENO: checking for shl_load" >&5 +-echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; } +-if test "${ac_cv_func_shl_load+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define shl_load to an innocuous variant, in case declares shl_load. +- For example, HP-UX 11i declares gettimeofday. */ +-#define shl_load innocuous_shl_load +- +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char shl_load (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ +- +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif +- +-#undef shl_load +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char shl_load (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_shl_load || defined __stub___shl_load +-choke me +-#endif +- +-int +-main () +-{ +-return shl_load (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- ac_cv_func_shl_load=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_func_shl_load=no +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 +-echo "${ECHO_T}$ac_cv_func_shl_load" >&6; } +-if test $ac_cv_func_shl_load = yes; then +- lt_cv_dlopen="shl_load" +-else +- { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +-echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; } +-if test "${ac_cv_lib_dld_shl_load+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldld $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char shl_load (); +-int +-main () +-{ +-return shl_load (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- ac_cv_lib_dld_shl_load=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_dld_shl_load=no +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +-echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; } +-if test $ac_cv_lib_dld_shl_load = yes; then +- lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" +-else +- { echo "$as_me:$LINENO: checking for dlopen" >&5 +-echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; } +-if test "${ac_cv_func_dlopen+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define dlopen to an innocuous variant, in case declares dlopen. +- For example, HP-UX 11i declares gettimeofday. */ +-#define dlopen innocuous_dlopen +- +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char dlopen (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ +- +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif +- +-#undef dlopen +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char dlopen (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_dlopen || defined __stub___dlopen +-choke me +-#endif +- +-int +-main () +-{ +-return dlopen (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- ac_cv_func_dlopen=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_func_dlopen=no +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_func_dlopen" >&6; } +-if test $ac_cv_func_dlopen = yes; then +- lt_cv_dlopen="dlopen" +-else +- { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } +-if test "${ac_cv_lib_dl_dlopen+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldl $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char dlopen (); +-int +-main () +-{ +-return dlopen (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- ac_cv_lib_dl_dlopen=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_dl_dlopen=no +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } +-if test $ac_cv_lib_dl_dlopen = yes; then +- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +-else +- { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 +-echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; } +-if test "${ac_cv_lib_svld_dlopen+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lsvld $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char dlopen (); +-int +-main () +-{ +-return dlopen (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- ac_cv_lib_svld_dlopen=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_svld_dlopen=no +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; } +-if test $ac_cv_lib_svld_dlopen = yes; then +- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" +-else +- { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 +-echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; } +-if test "${ac_cv_lib_dld_dld_link+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldld $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char dld_link (); +-int +-main () +-{ +-return dld_link (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- ac_cv_lib_dld_dld_link=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_dld_dld_link=no +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 +-echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; } +-if test $ac_cv_lib_dld_dld_link = yes; then +- lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" +-fi +- +- +-fi +- +- +-fi +- +- +-fi +- +- +-fi +- +- +-fi +- +- ;; +- esac +- +- if test "x$lt_cv_dlopen" != xno; then +- enable_dlopen=yes +- else +- enable_dlopen=no +- fi +- +- case $lt_cv_dlopen in +- dlopen) +- save_CPPFLAGS="$CPPFLAGS" +- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" +- +- save_LDFLAGS="$LDFLAGS" +- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" +- +- save_LIBS="$LIBS" +- LIBS="$lt_cv_dlopen_libs $LIBS" +- +- { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 +-echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; } +-if test "${lt_cv_dlopen_self+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test "$cross_compiling" = yes; then : +- lt_cv_dlopen_self=cross +-else +- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 +- lt_status=$lt_dlunknown +- cat > conftest.$ac_ext < +-#endif +- +-#include +- +-#ifdef RTLD_GLOBAL +-# define LT_DLGLOBAL RTLD_GLOBAL +-#else +-# ifdef DL_GLOBAL +-# define LT_DLGLOBAL DL_GLOBAL +-# else +-# define LT_DLGLOBAL 0 +-# endif +-#endif +- +-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we +- find out it does not work in some platform. */ +-#ifndef LT_DLLAZY_OR_NOW +-# ifdef RTLD_LAZY +-# define LT_DLLAZY_OR_NOW RTLD_LAZY +-# else +-# ifdef DL_LAZY +-# define LT_DLLAZY_OR_NOW DL_LAZY +-# else +-# ifdef RTLD_NOW +-# define LT_DLLAZY_OR_NOW RTLD_NOW +-# else +-# ifdef DL_NOW +-# define LT_DLLAZY_OR_NOW DL_NOW +-# else +-# define LT_DLLAZY_OR_NOW 0 +-# endif +-# endif +-# endif +-# endif +-#endif +- +-#ifdef __cplusplus +-extern "C" void exit (int); +-#endif +- +-void fnord() { int i=42;} +-int main () +-{ +- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +- int status = $lt_dlunknown; +- +- if (self) +- { +- if (dlsym (self,"fnord")) status = $lt_dlno_uscore; +- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; +- /* dlclose (self); */ +- } +- else +- puts (dlerror ()); +- +- exit (status); +-} +-EOF +- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then +- (./conftest; exit; ) >&5 2>/dev/null +- lt_status=$? +- case x$lt_status in +- x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; +- x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; +- x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; +- esac +- else : +- # compilation failed +- lt_cv_dlopen_self=no +- fi +-fi +-rm -fr conftest* +- +- +-fi +-{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 +-echo "${ECHO_T}$lt_cv_dlopen_self" >&6; } +- +- if test "x$lt_cv_dlopen_self" = xyes; then +- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" +- { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 +-echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; } +-if test "${lt_cv_dlopen_self_static+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test "$cross_compiling" = yes; then : +- lt_cv_dlopen_self_static=cross +-else +- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 +- lt_status=$lt_dlunknown +- cat > conftest.$ac_ext < +-#endif +- +-#include +- +-#ifdef RTLD_GLOBAL +-# define LT_DLGLOBAL RTLD_GLOBAL +-#else +-# ifdef DL_GLOBAL +-# define LT_DLGLOBAL DL_GLOBAL +-# else +-# define LT_DLGLOBAL 0 +-# endif +-#endif +- +-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we +- find out it does not work in some platform. */ +-#ifndef LT_DLLAZY_OR_NOW +-# ifdef RTLD_LAZY +-# define LT_DLLAZY_OR_NOW RTLD_LAZY +-# else +-# ifdef DL_LAZY +-# define LT_DLLAZY_OR_NOW DL_LAZY +-# else +-# ifdef RTLD_NOW +-# define LT_DLLAZY_OR_NOW RTLD_NOW +-# else +-# ifdef DL_NOW +-# define LT_DLLAZY_OR_NOW DL_NOW +-# else +-# define LT_DLLAZY_OR_NOW 0 +-# endif +-# endif +-# endif +-# endif +-#endif +- +-#ifdef __cplusplus +-extern "C" void exit (int); +-#endif +- +-void fnord() { int i=42;} +-int main () +-{ +- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +- int status = $lt_dlunknown; +- +- if (self) +- { +- if (dlsym (self,"fnord")) status = $lt_dlno_uscore; +- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; +- /* dlclose (self); */ +- } +- else +- puts (dlerror ()); +- +- exit (status); +-} +-EOF +- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then +- (./conftest; exit; ) >&5 2>/dev/null +- lt_status=$? +- case x$lt_status in +- x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; +- x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; +- x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; +- esac +- else : +- # compilation failed +- lt_cv_dlopen_self_static=no +- fi +-fi +-rm -fr conftest* +- +- +-fi +-{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 +-echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; } +- fi +- +- CPPFLAGS="$save_CPPFLAGS" +- LDFLAGS="$save_LDFLAGS" +- LIBS="$save_LIBS" +- ;; +- esac +- +- case $lt_cv_dlopen_self in +- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; +- *) enable_dlopen_self=unknown ;; +- esac +- +- case $lt_cv_dlopen_self_static in +- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; +- *) enable_dlopen_self_static=unknown ;; +- esac +-fi +- +- +-# Report which library types will actually be built +-{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 +-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; } +-{ echo "$as_me:$LINENO: result: $can_build_shared" >&5 +-echo "${ECHO_T}$can_build_shared" >&6; } +- +-{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 +-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; } +-test "$can_build_shared" = "no" && enable_shared=no +- +-# On AIX, shared libraries and static libraries use the same namespace, and +-# are all built from PIC. +-case $host_os in +-aix3*) +- test "$enable_shared" = yes && enable_static=no +- if test -n "$RANLIB"; then +- archive_cmds="$archive_cmds~\$RANLIB \$lib" +- postinstall_cmds='$RANLIB $lib' +- fi +- ;; +- +-aix4* | aix5*) +- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then +- test "$enable_shared" = yes && enable_static=no +- fi +- ;; +-esac +-{ echo "$as_me:$LINENO: result: $enable_shared" >&5 +-echo "${ECHO_T}$enable_shared" >&6; } +- +-{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5 +-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; } +-# Make sure either enable_shared or enable_static is yes. +-test "$enable_shared" = yes || enable_static=yes +-{ echo "$as_me:$LINENO: result: $enable_static" >&5 +-echo "${ECHO_T}$enable_static" >&6; } +- +-# The else clause should only fire when bootstrapping the +-# libtool distribution, otherwise you forgot to ship ltmain.sh +-# with your package, and you will get complaints that there are +-# no rules to generate ltmain.sh. +-if test -f "$ltmain"; then +- # See if we are running on zsh, and set the options which allow our commands through +- # without removal of \ escapes. +- if test -n "${ZSH_VERSION+set}" ; then +- setopt NO_GLOB_SUBST +- fi +- # Now quote all the things that may contain metacharacters while being +- # careful not to overquote the AC_SUBSTed values. We take copies of the +- # variables and quote the copies for generation of the libtool script. +- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ +- SED SHELL STRIP \ +- libname_spec library_names_spec soname_spec extract_expsyms_cmds \ +- old_striplib striplib file_magic_cmd finish_cmds finish_eval \ +- deplibs_check_method reload_flag reload_cmds need_locks \ +- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ +- lt_cv_sys_global_symbol_to_c_name_address \ +- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ +- old_postinstall_cmds old_postuninstall_cmds \ +- compiler \ +- CC \ +- LD \ +- lt_prog_compiler_wl \ +- lt_prog_compiler_pic \ +- lt_prog_compiler_static \ +- lt_prog_compiler_no_builtin_flag \ +- export_dynamic_flag_spec \ +- thread_safe_flag_spec \ +- whole_archive_flag_spec \ +- enable_shared_with_static_runtimes \ +- old_archive_cmds \ +- old_archive_from_new_cmds \ +- predep_objects \ +- postdep_objects \ +- predeps \ +- postdeps \ +- compiler_lib_search_path \ +- archive_cmds \ +- archive_expsym_cmds \ +- postinstall_cmds \ +- postuninstall_cmds \ +- old_archive_from_expsyms_cmds \ +- allow_undefined_flag \ +- no_undefined_flag \ +- export_symbols_cmds \ +- hardcode_libdir_flag_spec \ +- hardcode_libdir_flag_spec_ld \ +- hardcode_libdir_separator \ +- hardcode_automatic \ +- module_cmds \ +- module_expsym_cmds \ +- lt_cv_prog_compiler_c_o \ +- fix_srcfile_path \ +- exclude_expsyms \ +- include_expsyms; do +- +- case $var in +- old_archive_cmds | \ +- old_archive_from_new_cmds | \ +- archive_cmds | \ +- archive_expsym_cmds | \ +- module_cmds | \ +- module_expsym_cmds | \ +- old_archive_from_expsyms_cmds | \ +- export_symbols_cmds | \ +- extract_expsyms_cmds | reload_cmds | finish_cmds | \ +- postinstall_cmds | postuninstall_cmds | \ +- old_postinstall_cmds | old_postuninstall_cmds | \ +- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) +- # Double-quote double-evaled strings. +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" +- ;; +- *) +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" +- ;; +- esac +- done +- +- case $lt_echo in +- *'\$0 --fallback-echo"') +- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` +- ;; +- esac +- +-cfgfile="${ofile}T" +- trap "$rm \"$cfgfile\"; exit 1" 1 2 15 +- $rm -f "$cfgfile" +- { echo "$as_me:$LINENO: creating $ofile" >&5 +-echo "$as_me: creating $ofile" >&6;} +- +- cat <<__EOF__ >> "$cfgfile" +-#! $SHELL +- +-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +-# NOTE: Changes made to this file will be lost: look at ltmain.sh. +-# +-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 +-# Free Software Foundation, Inc. +-# +-# This file is part of GNU Libtool: +-# Originally by Gordon Matzigkeit , 1996 +-# +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2 of the License, or +-# (at your option) any later version. +-# +-# This program is distributed in the hope that it will be useful, but +-# WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +-# General Public License for more details. +-# +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +-# +-# As a special exception to the GNU General Public License, if you +-# distribute this file as part of a program that contains a +-# configuration script generated by Autoconf, you may include it under +-# the same distribution terms that you use for the rest of that program. +- +-# A sed program that does not truncate output. +-SED=$lt_SED +- +-# Sed that helps us avoid accidentally triggering echo(1) options like -n. +-Xsed="$SED -e 1s/^X//" +- +-# The HP-UX ksh and POSIX shell print the target directory to stdout +-# if CDPATH is set. +-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH +- +-# The names of the tagged configurations supported by this script. +-available_tags= +- +-# ### BEGIN LIBTOOL CONFIG +- +-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +- +-# Shell to use when invoking shell scripts. +-SHELL=$lt_SHELL +- +-# Whether or not to build shared libraries. +-build_libtool_libs=$enable_shared +- +-# Whether or not to build static libraries. +-build_old_libs=$enable_static +- +-# Whether or not to add -lc for building shared libraries. +-build_libtool_need_lc=$archive_cmds_need_lc +- +-# Whether or not to disallow shared libs when runtime libs are static +-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes +- +-# Whether or not to optimize for fast installation. +-fast_install=$enable_fast_install +- +-# The host system. +-host_alias=$host_alias +-host=$host +-host_os=$host_os +- +-# The build system. +-build_alias=$build_alias +-build=$build +-build_os=$build_os +- +-# An echo program that does not interpret backslashes. +-echo=$lt_echo +- +-# The archiver. +-AR=$lt_AR +-AR_FLAGS=$lt_AR_FLAGS +- +-# A C compiler. +-LTCC=$lt_LTCC +- +-# LTCC compiler flags. +-LTCFLAGS=$lt_LTCFLAGS +- +-# A language-specific compiler. +-CC=$lt_compiler +- +-# Is the compiler the GNU C compiler? +-with_gcc=$GCC +- +-# An ERE matcher. +-EGREP=$lt_EGREP +- +-# The linker used to build libraries. +-LD=$lt_LD +- +-# Whether we need hard or soft links. +-LN_S=$lt_LN_S +- +-# A BSD-compatible nm program. +-NM=$lt_NM +- +-# A symbol stripping program +-STRIP=$lt_STRIP +- +-# Used to examine libraries when file_magic_cmd begins "file" +-MAGIC_CMD=$MAGIC_CMD +- +-# Used on cygwin: DLL creation program. +-DLLTOOL="$DLLTOOL" +- +-# Used on cygwin: object dumper. +-OBJDUMP="$OBJDUMP" +- +-# Used on cygwin: assembler. +-AS="$AS" +- +-# The name of the directory that contains temporary libtool files. +-objdir=$objdir +- +-# How to create reloadable object files. +-reload_flag=$lt_reload_flag +-reload_cmds=$lt_reload_cmds +- +-# How to pass a linker flag through the compiler. +-wl=$lt_lt_prog_compiler_wl +- +-# Object file suffix (normally "o"). +-objext="$ac_objext" +- +-# Old archive suffix (normally "a"). +-libext="$libext" +- +-# Shared library suffix (normally ".so"). +-shrext_cmds='$shrext_cmds' +- +-# Executable file suffix (normally ""). +-exeext="$exeext" +- +-# Additional compiler flags for building library objects. +-pic_flag=$lt_lt_prog_compiler_pic +-pic_mode=$pic_mode +- +-# What is the maximum length of a command? +-max_cmd_len=$lt_cv_sys_max_cmd_len +- +-# Does compiler simultaneously support -c and -o options? +-compiler_c_o=$lt_lt_cv_prog_compiler_c_o +- +-# Must we lock files when doing compilation? +-need_locks=$lt_need_locks +- +-# Do we need the lib prefix for modules? +-need_lib_prefix=$need_lib_prefix +- +-# Do we need a version for libraries? +-need_version=$need_version +- +-# Whether dlopen is supported. +-dlopen_support=$enable_dlopen +- +-# Whether dlopen of programs is supported. +-dlopen_self=$enable_dlopen_self +- +-# Whether dlopen of statically linked programs is supported. +-dlopen_self_static=$enable_dlopen_self_static +- +-# Compiler flag to prevent dynamic linking. +-link_static_flag=$lt_lt_prog_compiler_static +- +-# Compiler flag to turn off builtin functions. +-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag +- +-# Compiler flag to allow reflexive dlopens. +-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec +- +-# Compiler flag to generate shared objects directly from archives. +-whole_archive_flag_spec=$lt_whole_archive_flag_spec +- +-# Compiler flag to generate thread-safe objects. +-thread_safe_flag_spec=$lt_thread_safe_flag_spec +- +-# Library versioning type. +-version_type=$version_type +- +-# Format of library name prefix. +-libname_spec=$lt_libname_spec +- +-# List of archive names. First name is the real one, the rest are links. +-# The last name is the one that the linker finds with -lNAME. +-library_names_spec=$lt_library_names_spec +- +-# The coded name of the library, if different from the real name. +-soname_spec=$lt_soname_spec +- +-# Commands used to build and install an old-style archive. +-RANLIB=$lt_RANLIB +-old_archive_cmds=$lt_old_archive_cmds +-old_postinstall_cmds=$lt_old_postinstall_cmds +-old_postuninstall_cmds=$lt_old_postuninstall_cmds +- +-# Create an old-style archive from a shared archive. +-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds +- +-# Create a temporary old-style archive to link instead of a shared archive. +-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds +- +-# Commands used to build and install a shared archive. +-archive_cmds=$lt_archive_cmds +-archive_expsym_cmds=$lt_archive_expsym_cmds +-postinstall_cmds=$lt_postinstall_cmds +-postuninstall_cmds=$lt_postuninstall_cmds +- +-# Commands used to build a loadable module (assumed same as above if empty) +-module_cmds=$lt_module_cmds +-module_expsym_cmds=$lt_module_expsym_cmds +- +-# Commands to strip libraries. +-old_striplib=$lt_old_striplib +-striplib=$lt_striplib +- +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predep_objects=$lt_predep_objects +- +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdep_objects=$lt_postdep_objects +- +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predeps=$lt_predeps +- +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdeps=$lt_postdeps +- +-# The library search path used internally by the compiler when linking +-# a shared library. +-compiler_lib_search_path=$lt_compiler_lib_search_path +- +-# Method to check whether dependent libraries are shared objects. +-deplibs_check_method=$lt_deplibs_check_method +- +-# Command to use when deplibs_check_method == file_magic. +-file_magic_cmd=$lt_file_magic_cmd +- +-# Flag that allows shared libraries with undefined symbols to be built. +-allow_undefined_flag=$lt_allow_undefined_flag +- +-# Flag that forces no undefined symbols. +-no_undefined_flag=$lt_no_undefined_flag +- +-# Commands used to finish a libtool library installation in a directory. +-finish_cmds=$lt_finish_cmds +- +-# Same as above, but a single script fragment to be evaled but not shown. +-finish_eval=$lt_finish_eval +- +-# Take the output of nm and produce a listing of raw symbols and C names. +-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe +- +-# Transform the output of nm in a proper C declaration +-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl +- +-# Transform the output of nm in a C name address pair +-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address +- +-# This is the shared library runtime path variable. +-runpath_var=$runpath_var +- +-# This is the shared library path variable. +-shlibpath_var=$shlibpath_var +- +-# Is shlibpath searched before the hard-coded library search path? +-shlibpath_overrides_runpath=$shlibpath_overrides_runpath +- +-# How to hardcode a shared library path into an executable. +-hardcode_action=$hardcode_action +- +-# Whether we should hardcode library paths into libraries. +-hardcode_into_libs=$hardcode_into_libs +- +-# Flag to hardcode \$libdir into a binary during linking. +-# This must work even if \$libdir does not exist. +-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec +- +-# If ld is used when linking, flag to hardcode \$libdir into +-# a binary during linking. This must work even if \$libdir does +-# not exist. +-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld +- +-# Whether we need a single -rpath flag with a separated argument. +-hardcode_libdir_separator=$lt_hardcode_libdir_separator +- +-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +-# resulting binary. +-hardcode_direct=$hardcode_direct +- +-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +-# resulting binary. +-hardcode_minus_L=$hardcode_minus_L +- +-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +-# the resulting binary. +-hardcode_shlibpath_var=$hardcode_shlibpath_var +- +-# Set to yes if building a shared library automatically hardcodes DIR into the library +-# and all subsequent libraries and executables linked against it. +-hardcode_automatic=$hardcode_automatic +- +-# Variables whose values should be saved in libtool wrapper scripts and +-# restored at relink time. +-variables_saved_for_relink="$variables_saved_for_relink" +- +-# Whether libtool must link a program against all its dependency libraries. +-link_all_deplibs=$link_all_deplibs +- +-# Compile-time system search path for libraries +-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec +- +-# Run-time system search path for libraries +-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec +- +-# Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path=$lt_fix_srcfile_path +- +-# Set to yes if exported symbols are required. +-always_export_symbols=$always_export_symbols +- +-# The commands to list exported symbols. +-export_symbols_cmds=$lt_export_symbols_cmds +- +-# The commands to extract the exported symbol list from a shared archive. +-extract_expsyms_cmds=$lt_extract_expsyms_cmds +- +-# Symbols that should not be listed in the preloaded symbols. +-exclude_expsyms=$lt_exclude_expsyms +- +-# Symbols that must always be exported. +-include_expsyms=$lt_include_expsyms +- +-# ### END LIBTOOL CONFIG +- +-__EOF__ +- +- +- case $host_os in +- aix3*) +- cat <<\EOF >> "$cfgfile" +- +-# AIX sometimes has problems with the GCC collect2 program. For some +-# reason, if we set the COLLECT_NAMES environment variable, the problems +-# vanish in a puff of smoke. +-if test "X${COLLECT_NAMES+set}" != Xset; then +- COLLECT_NAMES= +- export COLLECT_NAMES +-fi +-EOF +- ;; +- esac +- +- # We use sed instead of cat because bash on DJGPP gets confused if +- # if finds mixed CR/LF and LF-only lines. Since sed operates in +- # text mode, it properly converts lines to CR/LF. This bash problem +- # is reportedly fixed, but why not run on old versions too? +- sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) +- +- mv -f "$cfgfile" "$ofile" || \ +- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") +- chmod +x "$ofile" +- +-else +- # If there is no Makefile yet, we rely on a make rule to execute +- # `config.status --recheck' to rerun these tests and create the +- # libtool script then. +- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` +- if test -f "$ltmain_in"; then +- test -f Makefile && make "$ltmain" +- fi +-fi +- +- +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu +- +-CC="$lt_save_CC" +- +- +-# Check whether --with-tags was given. +-if test "${with_tags+set}" = set; then +- withval=$with_tags; tagnames="$withval" +-fi +- +- +-if test -f "$ltmain" && test -n "$tagnames"; then +- if test ! -f "${ofile}"; then +- { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5 +-echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;} +- fi +- +- if test -z "$LTCC"; then +- eval "`$SHELL ${ofile} --config | grep '^LTCC='`" +- if test -z "$LTCC"; then +- { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5 +-echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;} +- else +- { echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5 +-echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;} +- fi +- fi +- if test -z "$LTCFLAGS"; then +- eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`" +- fi +- +- # Extract list of available tagged configurations in $ofile. +- # Note that this assumes the entire list is on one line. +- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` +- +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for tagname in $tagnames; do +- IFS="$lt_save_ifs" +- # Check whether tagname contains only valid characters +- case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in +- "") ;; +- *) { { echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5 +-echo "$as_me: error: invalid tag name: $tagname" >&2;} +- { (exit 1); exit 1; }; } +- ;; +- esac +- +- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null +- then +- { { echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5 +-echo "$as_me: error: tag name \"$tagname\" already exists" >&2;} +- { (exit 1); exit 1; }; } +- fi +- +- # Update the list of available tags. +- if test -n "$tagname"; then +- echo appending configuration tag \"$tagname\" to $ofile +- +- case $tagname in +- CXX) +- if test -n "$CXX" && ( test "X$CXX" != "Xno" && +- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || +- (test "X$CXX" != "Xg++"))) ; then +- ac_ext=cpp +-ac_cpp='$CXXCPP $CPPFLAGS' +-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +- +- +- +- +-archive_cmds_need_lc_CXX=no +-allow_undefined_flag_CXX= +-always_export_symbols_CXX=no +-archive_expsym_cmds_CXX= +-export_dynamic_flag_spec_CXX= +-hardcode_direct_CXX=no +-hardcode_libdir_flag_spec_CXX= +-hardcode_libdir_flag_spec_ld_CXX= +-hardcode_libdir_separator_CXX= +-hardcode_minus_L_CXX=no +-hardcode_shlibpath_var_CXX=unsupported +-hardcode_automatic_CXX=no +-module_cmds_CXX= +-module_expsym_cmds_CXX= +-link_all_deplibs_CXX=unknown +-old_archive_cmds_CXX=$old_archive_cmds +-no_undefined_flag_CXX= +-whole_archive_flag_spec_CXX= +-enable_shared_with_static_runtimes_CXX=no +- +-# Dependencies to place before and after the object being linked: +-predep_objects_CXX= +-postdep_objects_CXX= +-predeps_CXX= +-postdeps_CXX= +-compiler_lib_search_path_CXX= +- +-# Source file extension for C++ test sources. +-ac_ext=cpp +- +-# Object file extension for compiled C++ test sources. +-objext=o +-objext_CXX=$objext +- +-# Code to be used in simple compile tests +-lt_simple_compile_test_code="int some_variable = 0;" +- +-# Code to be used in simple link tests +-lt_simple_link_test_code='int main(int, char *[]) { return(0); }' +- +-# ltmain only uses $CC for tagged configurations so make sure $CC is set. +- +-# If no C compiler was specified, use CC. +-LTCC=${LTCC-"$CC"} +- +-# If no C compiler flags were specified, use CFLAGS. +-LTCFLAGS=${LTCFLAGS-"$CFLAGS"} +- +-# Allow CC to be a program name with arguments. +-compiler=$CC +- +- +-# save warnings/boilerplate of simple test code +-ac_outfile=conftest.$ac_objext +-echo "$lt_simple_compile_test_code" >conftest.$ac_ext +-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +-_lt_compiler_boilerplate=`cat conftest.err` +-$rm conftest* +- +-ac_outfile=conftest.$ac_objext +-echo "$lt_simple_link_test_code" >conftest.$ac_ext +-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +-_lt_linker_boilerplate=`cat conftest.err` +-$rm conftest* +- +- +-# Allow CC to be a program name with arguments. +-lt_save_CC=$CC +-lt_save_LD=$LD +-lt_save_GCC=$GCC +-GCC=$GXX +-lt_save_with_gnu_ld=$with_gnu_ld +-lt_save_path_LD=$lt_cv_path_LD +-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then +- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx +-else +- $as_unset lt_cv_prog_gnu_ld +-fi +-if test -n "${lt_cv_path_LDCXX+set}"; then +- lt_cv_path_LD=$lt_cv_path_LDCXX +-else +- $as_unset lt_cv_path_LD +-fi +-test -z "${LDCXX+set}" || LD=$LDCXX +-CC=${CXX-"c++"} +-compiler=$CC +-compiler_CXX=$CC +-for cc_temp in $compiler""; do +- case $cc_temp in +- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; +- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; +- \-*) ;; +- *) break;; +- esac +-done +-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` +- +- +-# We don't want -fno-exception wen compiling C++ code, so set the +-# no_builtin_flag separately +-if test "$GXX" = yes; then +- lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin' +-else +- lt_prog_compiler_no_builtin_flag_CXX= +-fi +- +-if test "$GXX" = yes; then +- # Set up default GNU C++ configuration +- +- +-# Check whether --with-gnu-ld was given. +-if test "${with_gnu_ld+set}" = set; then +- withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes +-else +- with_gnu_ld=no +-fi +- +-ac_prog=ld +-if test "$GCC" = yes; then +- # Check if gcc -print-prog-name=ld gives a path. +- { echo "$as_me:$LINENO: checking for ld used by $CC" >&5 +-echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; } +- case $host in +- *-*-mingw*) +- # gcc leaves a trailing carriage return which upsets mingw +- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; +- *) +- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; +- esac +- case $ac_prog in +- # Accept absolute paths. +- [\\/]* | ?:[\\/]*) +- re_direlt='/[^/][^/]*/\.\./' +- # Canonicalize the pathname of ld +- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` +- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do +- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` +- done +- test -z "$LD" && LD="$ac_prog" +- ;; +- "") +- # If it fails, then pretend we aren't using GCC. +- ac_prog=ld +- ;; +- *) +- # If it is relative, then search for the first ld in PATH. +- with_gnu_ld=unknown +- ;; +- esac +-elif test "$with_gnu_ld" = yes; then +- { echo "$as_me:$LINENO: checking for GNU ld" >&5 +-echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; } +-else +- { echo "$as_me:$LINENO: checking for non-GNU ld" >&5 +-echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; } +-fi +-if test "${lt_cv_path_LD+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test -z "$LD"; then +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +- for ac_dir in $PATH; do +- IFS="$lt_save_ifs" +- test -z "$ac_dir" && ac_dir=. +- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then +- lt_cv_path_LD="$ac_dir/$ac_prog" +- # Check to see if the program is GNU ld. I'd rather use --version, +- # but apparently some variants of GNU ld only accept -v. +- # Break only if it was the GNU/non-GNU ld that we prefer. +- case `"$lt_cv_path_LD" -v 2>&1 &5 +-echo "${ECHO_T}$LD" >&6; } +-else +- { echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6; } +-fi +-test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 +-echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} +- { (exit 1); exit 1; }; } +-{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 +-echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; } +-if test "${lt_cv_prog_gnu_ld+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- # I'd rather use --version here, but apparently some GNU lds only accept -v. +-case `$LD -v 2>&1 &5 +-echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; } +-with_gnu_ld=$lt_cv_prog_gnu_ld +- +- +- +- # Check if GNU C++ uses GNU ld as the underlying linker, since the +- # archiving commands below assume that GNU ld is being used. +- if test "$with_gnu_ld" = yes; then +- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- +- hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' +- export_dynamic_flag_spec_CXX='${wl}--export-dynamic' +- +- # If archive_cmds runs LD, not CC, wlarc should be empty +- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to +- # investigate it a little bit more. (MM) +- wlarc='${wl}' +- +- # ancient GNU ld didn't support --whole-archive et. al. +- if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ +- grep 'no-whole-archive' > /dev/null; then +- whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- else +- whole_archive_flag_spec_CXX= +- fi +- else +- with_gnu_ld=no +- wlarc= +- +- # A generic and very simple default shared library creation +- # command for GNU C++ for the case where it uses the native +- # linker, instead of GNU ld. If possible, this setting should +- # overridden to take advantage of the native linker features on +- # the platform it is being used on. +- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' +- fi +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' +- +-else +- GXX=no +- with_gnu_ld=no +- wlarc= +-fi +- +-# PORTME: fill in a description of your system's C++ link characteristics +-{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } +-ld_shlibs_CXX=yes +-case $host_os in +- aix3*) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- aix4* | aix5*) +- if test "$host_cpu" = ia64; then +- # On IA64, the linker does run time linking by default, so we don't +- # have to do anything special. +- aix_use_runtimelinking=no +- exp_sym_flag='-Bexport' +- no_entry_flag="" +- else +- aix_use_runtimelinking=no +- +- # Test if we are trying to use run time linking or normal +- # AIX style linking. If -brtl is somewhere in LDFLAGS, we +- # need to do runtime linking. +- case $host_os in aix4.[23]|aix4.[23].*|aix5*) +- for ld_flag in $LDFLAGS; do +- case $ld_flag in +- *-brtl*) +- aix_use_runtimelinking=yes +- break +- ;; +- esac +- done +- ;; +- esac +- +- exp_sym_flag='-bexport' +- no_entry_flag='-bnoentry' +- fi +- +- # When large executables or shared objects are built, AIX ld can +- # have problems creating the table of contents. If linking a library +- # or program results in "error TOC overflow" add -mminimal-toc to +- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not +- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. +- +- archive_cmds_CXX='' +- hardcode_direct_CXX=yes +- hardcode_libdir_separator_CXX=':' +- link_all_deplibs_CXX=yes +- +- if test "$GXX" = yes; then +- case $host_os in aix4.[012]|aix4.[012].*) +- # We only want to do this on AIX 4.2 and lower, the check +- # below for broken collect2 doesn't work under 4.3+ +- collect2name=`${CC} -print-prog-name=collect2` +- if test -f "$collect2name" && \ +- strings "$collect2name" | grep resolve_lib_name >/dev/null +- then +- # We have reworked collect2 +- : +- else +- # We have old collect2 +- hardcode_direct_CXX=unsupported +- # It fails to find uninstalled libraries when the uninstalled +- # path is not listed in the libpath. Setting hardcode_minus_L +- # to unsupported forces relinking +- hardcode_minus_L_CXX=yes +- hardcode_libdir_flag_spec_CXX='-L$libdir' +- hardcode_libdir_separator_CXX= +- fi +- ;; +- esac +- shared_flag='-shared' +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag="$shared_flag "'${wl}-G' +- fi +- else +- # not using gcc +- if test "$host_cpu" = ia64; then +- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release +- # chokes on -Wl,-G. The following line is correct: +- shared_flag='-G' +- else +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag='${wl}-G' +- else +- shared_flag='${wl}-bM:SRE' +- fi +- fi +- fi +- +- # It seems that -bexpall does not export symbols beginning with +- # underscore (_), so it is better to generate a list of symbols to export. +- always_export_symbols_CXX=yes +- if test "$aix_use_runtimelinking" = yes; then +- # Warning - without using the other runtime loading flags (-brtl), +- # -berok will link without error, but may produce a broken library. +- allow_undefined_flag_CXX='-berok' +- # Determine the default libpath from the value encoded in an empty executable. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-int +-main () +-{ +- +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_cxx_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *\(.*\)$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +- +- hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" +- +- archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" +- else +- if test "$host_cpu" = ia64; then +- hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' +- allow_undefined_flag_CXX="-z nodefs" +- archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" +- else +- # Determine the default libpath from the value encoded in an empty executable. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-int +-main () +-{ +- +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_cxx_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *\(.*\)$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +- +- hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" +- # Warning - without using the other run time loading flags, +- # -berok will link without error, but may produce a broken library. +- no_undefined_flag_CXX=' ${wl}-bernotok' +- allow_undefined_flag_CXX=' ${wl}-berok' +- # Exported symbols can be pulled into shared objects from archives +- whole_archive_flag_spec_CXX='$convenience' +- archive_cmds_need_lc_CXX=yes +- # This is similar to how AIX traditionally builds its shared libraries. +- archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' +- fi +- fi +- ;; +- +- beos*) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- allow_undefined_flag_CXX=unsupported +- # Joseph Beckenbach says some releases of gcc +- # support --undefined. This deserves some investigation. FIXME +- archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- else +- ld_shlibs_CXX=no +- fi +- ;; +- +- chorus*) +- case $cc_basename in +- *) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- esac +- ;; +- +- cygwin* | mingw* | pw32*) +- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, +- # as there is no search path for DLLs. +- hardcode_libdir_flag_spec_CXX='-L$libdir' +- allow_undefined_flag_CXX=unsupported +- always_export_symbols_CXX=no +- enable_shared_with_static_runtimes_CXX=yes +- +- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then +- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- # If the export-symbols file already is a .def file (1st line +- # is EXPORTS), use it as is; otherwise, prepend... +- archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +- cp $export_symbols $output_objdir/$soname.def; +- else +- echo EXPORTS > $output_objdir/$soname.def; +- cat $export_symbols >> $output_objdir/$soname.def; +- fi~ +- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- else +- ld_shlibs_CXX=no +- fi +- ;; +- darwin* | rhapsody*) +- case $host_os in +- rhapsody* | darwin1.[012]) +- allow_undefined_flag_CXX='${wl}-undefined ${wl}suppress' +- ;; +- *) # Darwin 1.3 on +- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then +- allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' +- else +- case ${MACOSX_DEPLOYMENT_TARGET} in +- 10.[012]) +- allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' +- ;; +- 10.*) +- allow_undefined_flag_CXX='${wl}-undefined ${wl}dynamic_lookup' +- ;; +- esac +- fi +- ;; +- esac +- archive_cmds_need_lc_CXX=no +- hardcode_direct_CXX=no +- hardcode_automatic_CXX=yes +- hardcode_shlibpath_var_CXX=unsupported +- whole_archive_flag_spec_CXX='' +- link_all_deplibs_CXX=yes +- +- if test "$GXX" = yes ; then +- lt_int_apple_cc_single_mod=no +- output_verbose_link_cmd='echo' +- if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then +- lt_int_apple_cc_single_mod=yes +- fi +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- else +- archive_cmds_CXX='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- fi +- module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- else +- archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- fi +- module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- else +- case $cc_basename in +- xlc*) +- output_verbose_link_cmd='echo' +- archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' +- module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds +- archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- ;; +- *) +- ld_shlibs_CXX=no +- ;; +- esac +- fi +- ;; +- +- dgux*) +- case $cc_basename in +- ec++*) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- ghcx*) +- # Green Hills C++ Compiler +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- esac +- ;; +- freebsd[12]*) +- # C++ shared libraries reported to be fairly broken before switch to ELF +- ld_shlibs_CXX=no +- ;; +- freebsd-elf*) +- archive_cmds_need_lc_CXX=no +- ;; +- freebsd* | dragonfly*) +- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF +- # conventions +- ld_shlibs_CXX=yes +- ;; +- gnu*) +- ;; +- hpux9*) +- hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator_CXX=: +- export_dynamic_flag_spec_CXX='${wl}-E' +- hardcode_direct_CXX=yes +- hardcode_minus_L_CXX=yes # Not in the search PATH, +- # but as the default +- # location of the library. +- +- case $cc_basename in +- CC*) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- aCC*) +- archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- ;; +- *) +- if test "$GXX" = yes; then +- archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- else +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- fi +- ;; +- esac +- ;; +- hpux10*|hpux11*) +- if test $with_gnu_ld = no; then +- hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator_CXX=: +- +- case $host_cpu in +- hppa*64*|ia64*) ;; +- *) +- export_dynamic_flag_spec_CXX='${wl}-E' +- ;; +- esac +- fi +- case $host_cpu in +- hppa*64*|ia64*) +- hardcode_direct_CXX=no +- hardcode_shlibpath_var_CXX=no +- ;; +- *) +- hardcode_direct_CXX=yes +- hardcode_minus_L_CXX=yes # Not in the search PATH, +- # but as the default +- # location of the library. +- ;; +- esac +- +- case $cc_basename in +- CC*) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- aCC*) +- case $host_cpu in +- hppa*64*) +- archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- ;; +- ia64*) +- archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- ;; +- *) +- archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- ;; +- esac +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- ;; +- *) +- if test "$GXX" = yes; then +- if test $with_gnu_ld = no; then +- case $host_cpu in +- hppa*64*) +- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- ;; +- ia64*) +- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- ;; +- *) +- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- ;; +- esac +- fi +- else +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- fi +- ;; +- esac +- ;; +- interix[3-9]*) +- hardcode_direct_CXX=no +- hardcode_shlibpath_var_CXX=no +- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' +- export_dynamic_flag_spec_CXX='${wl}-E' +- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. +- # Instead, shared libraries are loaded at an image base (0x10000000 by +- # default) and relocated if they conflict, which is a slow very memory +- # consuming and fragmenting process. To avoid this, we pick a random, +- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link +- # time. Moving up from 0x10000000 also allows more sbrk(2) space. +- archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' +- archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' +- ;; +- irix5* | irix6*) +- case $cc_basename in +- CC*) +- # SGI C++ +- archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- +- # Archives containing C++ object files must be created using +- # "CC -ar", where "CC" is the IRIX C++ compiler. This is +- # necessary to make sure instantiated templates are included +- # in the archive. +- old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs' +- ;; +- *) +- if test "$GXX" = yes; then +- if test "$with_gnu_ld" = no; then +- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' +- fi +- fi +- link_all_deplibs_CXX=yes +- ;; +- esac +- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator_CXX=: +- ;; +- linux* | k*bsd*-gnu) +- case $cc_basename in +- KCC*) +- # Kuck and Associates, Inc. (KAI) C++ Compiler +- +- # KCC will only create a shared library if the output file +- # ends with ".so" (or ".sl" for HP-UX), so rename the library +- # to its proper name (with version) after linking. +- archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' +- archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- +- hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir' +- export_dynamic_flag_spec_CXX='${wl}--export-dynamic' +- +- # Archives containing C++ object files must be created using +- # "CC -Bstatic", where "CC" is the KAI C++ compiler. +- old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' +- ;; +- icpc*) +- # Intel C++ +- with_gnu_ld=yes +- # version 8.0 and above of icpc choke on multiply defined symbols +- # if we add $predep_objects and $postdep_objects, however 7.1 and +- # earlier do not add the objects themselves. +- case `$CC -V 2>&1` in +- *"Version 7."*) +- archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- ;; +- *) # Version 8.0 or newer +- tmp_idyn= +- case $host_cpu in +- ia64*) tmp_idyn=' -i_dynamic';; +- esac +- archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- ;; +- esac +- archive_cmds_need_lc_CXX=no +- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' +- export_dynamic_flag_spec_CXX='${wl}--export-dynamic' +- whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' +- ;; +- pgCC*) +- # Portland Group C++ compiler +- archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' +- archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' +- +- hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' +- export_dynamic_flag_spec_CXX='${wl}--export-dynamic' +- whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- ;; +- cxx*) +- # Compaq C++ +- archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' +- +- runpath_var=LD_RUN_PATH +- hardcode_libdir_flag_spec_CXX='-rpath $libdir' +- hardcode_libdir_separator_CXX=: +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- ;; +- *) +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) +- # Sun C++ 5.9 +- no_undefined_flag_CXX=' -zdefs' +- archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' +- hardcode_libdir_flag_spec_CXX='-R$libdir' +- whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- +- # Not sure whether something based on +- # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 +- # would be better. +- output_verbose_link_cmd='echo' +- +- # Archives containing C++ object files must be created using +- # "CC -xar", where "CC" is the Sun C++ compiler. This is +- # necessary to make sure instantiated templates are included +- # in the archive. +- old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' +- ;; +- esac +- ;; +- esac +- ;; +- lynxos*) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- m88k*) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- mvs*) +- case $cc_basename in +- cxx*) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- esac +- ;; +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' +- wlarc= +- hardcode_libdir_flag_spec_CXX='-R$libdir' +- hardcode_direct_CXX=yes +- hardcode_shlibpath_var_CXX=no +- fi +- # Workaround some broken pre-1.5 toolchains +- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' +- ;; +- openbsd2*) +- # C++ shared libraries are fairly broken +- ld_shlibs_CXX=no +- ;; +- openbsd*) +- if test -f /usr/libexec/ld.so; then +- hardcode_direct_CXX=yes +- hardcode_shlibpath_var_CXX=no +- archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' +- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' +- export_dynamic_flag_spec_CXX='${wl}-E' +- whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- fi +- output_verbose_link_cmd='echo' +- else +- ld_shlibs_CXX=no +- fi +- ;; +- osf3*) +- case $cc_basename in +- KCC*) +- # Kuck and Associates, Inc. (KAI) C++ Compiler +- +- # KCC will only create a shared library if the output file +- # ends with ".so" (or ".sl" for HP-UX), so rename the library +- # to its proper name (with version) after linking. +- archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' +- +- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' +- hardcode_libdir_separator_CXX=: +- +- # Archives containing C++ object files must be created using +- # "CC -Bstatic", where "CC" is the KAI C++ compiler. +- old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' +- +- ;; +- RCC*) +- # Rational C++ 2.4.1 +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- cxx*) +- allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- +- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator_CXX=: +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- ;; +- *) +- if test "$GXX" = yes && test "$with_gnu_ld" = no; then +- allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- +- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator_CXX=: +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' +- +- else +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- fi +- ;; +- esac +- ;; +- osf4* | osf5*) +- case $cc_basename in +- KCC*) +- # Kuck and Associates, Inc. (KAI) C++ Compiler +- +- # KCC will only create a shared library if the output file +- # ends with ".so" (or ".sl" for HP-UX), so rename the library +- # to its proper name (with version) after linking. +- archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' +- +- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' +- hardcode_libdir_separator_CXX=: +- +- # Archives containing C++ object files must be created using +- # the KAI C++ compiler. +- old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' +- ;; +- RCC*) +- # Rational C++ 2.4.1 +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- cxx*) +- allow_undefined_flag_CXX=' -expect_unresolved \*' +- archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ +- echo "-hidden">> $lib.exp~ +- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ +- $rm $lib.exp' +- +- hardcode_libdir_flag_spec_CXX='-rpath $libdir' +- hardcode_libdir_separator_CXX=: +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- ;; +- *) +- if test "$GXX" = yes && test "$with_gnu_ld" = no; then +- allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- +- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator_CXX=: +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' +- +- else +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- fi +- ;; +- esac +- ;; +- psos*) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- sunos4*) +- case $cc_basename in +- CC*) +- # Sun C++ 4.x +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- lcc*) +- # Lucid +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- esac +- ;; +- solaris*) +- case $cc_basename in +- CC*) +- # Sun C++ 4.2, 5.x and Centerline C++ +- archive_cmds_need_lc_CXX=yes +- no_undefined_flag_CXX=' -zdefs' +- archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' +- +- hardcode_libdir_flag_spec_CXX='-R$libdir' +- hardcode_shlibpath_var_CXX=no +- case $host_os in +- solaris2.[0-5] | solaris2.[0-5].*) ;; +- *) +- # The compiler driver will combine and reorder linker options, +- # but understands `-z linker_flag'. +- # Supported since Solaris 2.6 (maybe 2.5.1?) +- whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract' +- ;; +- esac +- link_all_deplibs_CXX=yes +- +- output_verbose_link_cmd='echo' +- +- # Archives containing C++ object files must be created using +- # "CC -xar", where "CC" is the Sun C++ compiler. This is +- # necessary to make sure instantiated templates are included +- # in the archive. +- old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' +- ;; +- gcx*) +- # Green Hills C++ Compiler +- archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' +- +- # The C++ compiler must be used to create the archive. +- old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' +- ;; +- *) +- # GNU C++ compiler with Solaris linker +- if test "$GXX" = yes && test "$with_gnu_ld" = no; then +- no_undefined_flag_CXX=' ${wl}-z ${wl}defs' +- if $CC --version | grep -v '^2\.7' > /dev/null; then +- archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' +- archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" +- else +- # g++ 2.7 appears to require `-G' NOT `-shared' on this +- # platform. +- archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' +- archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" +- fi +- +- hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' +- case $host_os in +- solaris2.[0-5] | solaris2.[0-5].*) ;; +- *) +- whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' +- ;; +- esac +- fi +- ;; +- esac +- ;; +- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) +- no_undefined_flag_CXX='${wl}-z,text' +- archive_cmds_need_lc_CXX=no +- hardcode_shlibpath_var_CXX=no +- runpath_var='LD_RUN_PATH' +- +- case $cc_basename in +- CC*) +- archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- esac +- ;; +- sysv5* | sco3.2v5* | sco5v6*) +- # Note: We can NOT use -z defs as we might desire, because we do not +- # link with -lc, and that would cause any symbols used from libc to +- # always be unresolved, which means just about no library would +- # ever link correctly. If we're not using GNU ld we use -z text +- # though, which does catch some bad symbols but isn't as heavy-handed +- # as -z defs. +- # For security reasons, it is highly recommended that you always +- # use absolute paths for naming shared libraries, and exclude the +- # DT_RUNPATH tag from executables and libraries. But doing so +- # requires that you compile everything twice, which is a pain. +- # So that behaviour is only enabled if SCOABSPATH is set to a +- # non-empty value in the environment. Most likely only useful for +- # creating official distributions of packages. +- # This is a hack until libtool officially supports absolute path +- # names for shared libraries. +- no_undefined_flag_CXX='${wl}-z,text' +- allow_undefined_flag_CXX='${wl}-z,nodefs' +- archive_cmds_need_lc_CXX=no +- hardcode_shlibpath_var_CXX=no +- hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' +- hardcode_libdir_separator_CXX=':' +- link_all_deplibs_CXX=yes +- export_dynamic_flag_spec_CXX='${wl}-Bexport' +- runpath_var='LD_RUN_PATH' +- +- case $cc_basename in +- CC*) +- archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- esac +- ;; +- tandem*) +- case $cc_basename in +- NCC*) +- # NonStop-UX NCC 3.20 +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- esac +- ;; +- vxworks*) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +-esac +-{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 +-echo "${ECHO_T}$ld_shlibs_CXX" >&6; } +-test "$ld_shlibs_CXX" = no && can_build_shared=no +- +-GCC_CXX="$GXX" +-LD_CXX="$LD" +- +- +-cat > conftest.$ac_ext <&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- # Parse the compiler output and extract the necessary +- # objects, libraries and library flags. +- +- # Sentinel used to keep track of whether or not we are before +- # the conftest object file. +- pre_test_object_deps_done=no +- +- # The `*' in the case matches for architectures that use `case' in +- # $output_verbose_cmd can trigger glob expansion during the loop +- # eval without this substitution. +- output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"` +- +- for p in `eval $output_verbose_link_cmd`; do +- case $p in +- +- -L* | -R* | -l*) +- # Some compilers place space between "-{L,R}" and the path. +- # Remove the space. +- if test $p = "-L" \ +- || test $p = "-R"; then +- prev=$p +- continue +- else +- prev= +- fi +- +- if test "$pre_test_object_deps_done" = no; then +- case $p in +- -L* | -R*) +- # Internal compiler library paths should come after those +- # provided the user. The postdeps already come after the +- # user supplied libs so there is no need to process them. +- if test -z "$compiler_lib_search_path_CXX"; then +- compiler_lib_search_path_CXX="${prev}${p}" +- else +- compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}" +- fi +- ;; +- # The "-l" case would never come before the object being +- # linked, so don't bother handling this case. +- esac +- else +- if test -z "$postdeps_CXX"; then +- postdeps_CXX="${prev}${p}" +- else +- postdeps_CXX="${postdeps_CXX} ${prev}${p}" +- fi +- fi +- ;; +- +- *.$objext) +- # This assumes that the test object file only shows up +- # once in the compiler output. +- if test "$p" = "conftest.$objext"; then +- pre_test_object_deps_done=yes +- continue +- fi +- +- if test "$pre_test_object_deps_done" = no; then +- if test -z "$predep_objects_CXX"; then +- predep_objects_CXX="$p" +- else +- predep_objects_CXX="$predep_objects_CXX $p" +- fi +- else +- if test -z "$postdep_objects_CXX"; then +- postdep_objects_CXX="$p" +- else +- postdep_objects_CXX="$postdep_objects_CXX $p" +- fi +- fi +- ;; +- +- *) ;; # Ignore the rest. +- +- esac +- done +- +- # Clean up. +- rm -f a.out a.exe +-else +- echo "libtool.m4: error: problem compiling CXX test program" +-fi +- +-$rm -f confest.$objext +- +-# PORTME: override above test on systems where it is broken +-case $host_os in +-interix[3-9]*) +- # Interix 3.5 installs completely hosed .la files for C++, so rather than +- # hack all around it, let's just trust "g++" to DTRT. +- predep_objects_CXX= +- postdep_objects_CXX= +- postdeps_CXX= +- ;; +- +-linux*) +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) +- # Sun C++ 5.9 +- # +- # The more standards-conforming stlport4 library is +- # incompatible with the Cstd library. Avoid specifying +- # it if it's in CXXFLAGS. Ignore libCrun as +- # -library=stlport4 depends on it. +- case " $CXX $CXXFLAGS " in +- *" -library=stlport4 "*) +- solaris_use_stlport4=yes +- ;; +- esac +- if test "$solaris_use_stlport4" != yes; then +- postdeps_CXX='-library=Cstd -library=Crun' +- fi +- ;; +- esac +- ;; +- +-solaris*) +- case $cc_basename in +- CC*) +- # The more standards-conforming stlport4 library is +- # incompatible with the Cstd library. Avoid specifying +- # it if it's in CXXFLAGS. Ignore libCrun as +- # -library=stlport4 depends on it. +- case " $CXX $CXXFLAGS " in +- *" -library=stlport4 "*) +- solaris_use_stlport4=yes +- ;; +- esac +- +- # Adding this requires a known-good setup of shared libraries for +- # Sun compiler versions before 5.6, else PIC objects from an old +- # archive will be linked into the output, leading to subtle bugs. +- if test "$solaris_use_stlport4" != yes; then +- postdeps_CXX='-library=Cstd -library=Crun' +- fi +- ;; +- esac +- ;; +-esac +- +- +-case " $postdeps_CXX " in +-*" -lc "*) archive_cmds_need_lc_CXX=no ;; +-esac +- +-lt_prog_compiler_wl_CXX= +-lt_prog_compiler_pic_CXX= +-lt_prog_compiler_static_CXX= +- +-{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } +- +- # C++ specific cases for pic, static, wl, etc. +- if test "$GXX" = yes; then +- lt_prog_compiler_wl_CXX='-Wl,' +- lt_prog_compiler_static_CXX='-static' +- +- case $host_os in +- aix*) +- # All AIX code is PIC. +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- lt_prog_compiler_static_CXX='-Bstatic' +- fi +- ;; +- amigaos*) +- # FIXME: we need at least 68020 code to build shared libraries, but +- # adding the `-m68020' flag to GCC prevents building anything better, +- # like `-m68040'. +- lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' +- ;; +- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) +- # PIC is the default for these OSes. +- ;; +- mingw* | cygwin* | os2* | pw32*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- # Although the cygwin gcc ignores -fPIC, still need this for old-style +- # (--disable-auto-import) libraries +- lt_prog_compiler_pic_CXX='-DDLL_EXPORT' +- ;; +- darwin* | rhapsody*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- lt_prog_compiler_pic_CXX='-fno-common' +- ;; +- *djgpp*) +- # DJGPP does not support shared libraries at all +- lt_prog_compiler_pic_CXX= +- ;; +- interix[3-9]*) +- # Interix 3.x gcc -fpic/-fPIC options generate broken code. +- # Instead, we relocate shared libraries at runtime. +- ;; +- sysv4*MP*) +- if test -d /usr/nec; then +- lt_prog_compiler_pic_CXX=-Kconform_pic +- fi +- ;; +- hpux*) +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case $host_cpu in +- hppa*64*|ia64*) +- ;; +- *) +- lt_prog_compiler_pic_CXX='-fPIC' +- ;; +- esac +- ;; +- *) +- lt_prog_compiler_pic_CXX='-fPIC' +- ;; +- esac +- else +- case $host_os in +- aix4* | aix5*) +- # All AIX code is PIC. +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- lt_prog_compiler_static_CXX='-Bstatic' +- else +- lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp' +- fi +- ;; +- chorus*) +- case $cc_basename in +- cxch68*) +- # Green Hills C++ Compiler +- # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" +- ;; +- esac +- ;; +- darwin*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- case $cc_basename in +- xlc*) +- lt_prog_compiler_pic_CXX='-qnocommon' +- lt_prog_compiler_wl_CXX='-Wl,' +- ;; +- esac +- ;; +- dgux*) +- case $cc_basename in +- ec++*) +- lt_prog_compiler_pic_CXX='-KPIC' +- ;; +- ghcx*) +- # Green Hills C++ Compiler +- lt_prog_compiler_pic_CXX='-pic' +- ;; +- *) +- ;; +- esac +- ;; +- freebsd* | dragonfly*) +- # FreeBSD uses GNU C++ +- ;; +- hpux9* | hpux10* | hpux11*) +- case $cc_basename in +- CC*) +- lt_prog_compiler_wl_CXX='-Wl,' +- lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' +- if test "$host_cpu" != ia64; then +- lt_prog_compiler_pic_CXX='+Z' +- fi +- ;; +- aCC*) +- lt_prog_compiler_wl_CXX='-Wl,' +- lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' +- case $host_cpu in +- hppa*64*|ia64*) +- # +Z the default +- ;; +- *) +- lt_prog_compiler_pic_CXX='+Z' +- ;; +- esac +- ;; +- *) +- ;; +- esac +- ;; +- interix*) +- # This is c89, which is MS Visual C++ (no shared libs) +- # Anyone wants to do a port? +- ;; +- irix5* | irix6* | nonstopux*) +- case $cc_basename in +- CC*) +- lt_prog_compiler_wl_CXX='-Wl,' +- lt_prog_compiler_static_CXX='-non_shared' +- # CC pic flag -KPIC is the default. +- ;; +- *) +- ;; +- esac +- ;; +- linux* | k*bsd*-gnu) +- case $cc_basename in +- KCC*) +- # KAI C++ Compiler +- lt_prog_compiler_wl_CXX='--backend -Wl,' +- lt_prog_compiler_pic_CXX='-fPIC' +- ;; +- icpc* | ecpc*) +- # Intel C++ +- lt_prog_compiler_wl_CXX='-Wl,' +- lt_prog_compiler_pic_CXX='-KPIC' +- lt_prog_compiler_static_CXX='-static' +- ;; +- pgCC*) +- # Portland Group C++ compiler. +- lt_prog_compiler_wl_CXX='-Wl,' +- lt_prog_compiler_pic_CXX='-fpic' +- lt_prog_compiler_static_CXX='-Bstatic' +- ;; +- cxx*) +- # Compaq C++ +- # Make sure the PIC flag is empty. It appears that all Alpha +- # Linux and Compaq Tru64 Unix objects are PIC. +- lt_prog_compiler_pic_CXX= +- lt_prog_compiler_static_CXX='-non_shared' +- ;; +- *) +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) +- # Sun C++ 5.9 +- lt_prog_compiler_pic_CXX='-KPIC' +- lt_prog_compiler_static_CXX='-Bstatic' +- lt_prog_compiler_wl_CXX='-Qoption ld ' +- ;; +- esac +- ;; +- esac +- ;; +- lynxos*) +- ;; +- m88k*) +- ;; +- mvs*) +- case $cc_basename in +- cxx*) +- lt_prog_compiler_pic_CXX='-W c,exportall' +- ;; +- *) +- ;; +- esac +- ;; +- netbsd*) +- ;; +- osf3* | osf4* | osf5*) +- case $cc_basename in +- KCC*) +- lt_prog_compiler_wl_CXX='--backend -Wl,' +- ;; +- RCC*) +- # Rational C++ 2.4.1 +- lt_prog_compiler_pic_CXX='-pic' +- ;; +- cxx*) +- # Digital/Compaq C++ +- lt_prog_compiler_wl_CXX='-Wl,' +- # Make sure the PIC flag is empty. It appears that all Alpha +- # Linux and Compaq Tru64 Unix objects are PIC. +- lt_prog_compiler_pic_CXX= +- lt_prog_compiler_static_CXX='-non_shared' +- ;; +- *) +- ;; +- esac +- ;; +- psos*) +- ;; +- solaris*) +- case $cc_basename in +- CC*) +- # Sun C++ 4.2, 5.x and Centerline C++ +- lt_prog_compiler_pic_CXX='-KPIC' +- lt_prog_compiler_static_CXX='-Bstatic' +- lt_prog_compiler_wl_CXX='-Qoption ld ' +- ;; +- gcx*) +- # Green Hills C++ Compiler +- lt_prog_compiler_pic_CXX='-PIC' +- ;; +- *) +- ;; +- esac +- ;; +- sunos4*) +- case $cc_basename in +- CC*) +- # Sun C++ 4.x +- lt_prog_compiler_pic_CXX='-pic' +- lt_prog_compiler_static_CXX='-Bstatic' +- ;; +- lcc*) +- # Lucid +- lt_prog_compiler_pic_CXX='-pic' +- ;; +- *) +- ;; +- esac +- ;; +- tandem*) +- case $cc_basename in +- NCC*) +- # NonStop-UX NCC 3.20 +- lt_prog_compiler_pic_CXX='-KPIC' +- ;; +- *) +- ;; +- esac +- ;; +- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) +- case $cc_basename in +- CC*) +- lt_prog_compiler_wl_CXX='-Wl,' +- lt_prog_compiler_pic_CXX='-KPIC' +- lt_prog_compiler_static_CXX='-Bstatic' +- ;; +- esac +- ;; +- vxworks*) +- ;; +- *) +- lt_prog_compiler_can_build_shared_CXX=no +- ;; +- esac +- fi +- +-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6; } +- +-# +-# Check to make sure the PIC flag actually works. +-# +-if test -n "$lt_prog_compiler_pic_CXX"; then +- +-{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 +-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6; } +-if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- lt_prog_compiler_pic_works_CXX=no +- ac_outfile=conftest.$ac_objext +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext +- lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- # The option is referenced via a variable to avoid confusing sed. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ +- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:12737: $lt_compile\"" >&5) +- (eval "$lt_compile" 2>conftest.err) +- ac_status=$? +- cat conftest.err >&5 +- echo "$as_me:12741: \$? = $ac_status" >&5 +- if (exit $ac_status) && test -s "$ac_outfile"; then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings other than the usual output. +- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp +- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 +- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then +- lt_prog_compiler_pic_works_CXX=yes +- fi +- fi +- $rm conftest* +- +-fi +-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6; } +- +-if test x"$lt_prog_compiler_pic_works_CXX" = xyes; then +- case $lt_prog_compiler_pic_CXX in +- "" | " "*) ;; +- *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; +- esac +-else +- lt_prog_compiler_pic_CXX= +- lt_prog_compiler_can_build_shared_CXX=no +-fi +- +-fi +-case $host_os in +- # For platforms which do not support PIC, -DPIC is meaningless: +- *djgpp*) +- lt_prog_compiler_pic_CXX= +- ;; +- *) +- lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" +- ;; +-esac +- +-# +-# Check to make sure the static flag actually works. +-# +-wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\" +-{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } +-if test "${lt_prog_compiler_static_works_CXX+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- lt_prog_compiler_static_works_CXX=no +- save_LDFLAGS="$LDFLAGS" +- LDFLAGS="$LDFLAGS $lt_tmp_static_flag" +- echo "$lt_simple_link_test_code" > conftest.$ac_ext +- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then +- # The linker can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test -s conftest.err; then +- # Append any errors to the config.log. +- cat conftest.err 1>&5 +- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp +- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 +- if diff conftest.exp conftest.er2 >/dev/null; then +- lt_prog_compiler_static_works_CXX=yes +- fi +- else +- lt_prog_compiler_static_works_CXX=yes +- fi +- fi +- $rm conftest* +- LDFLAGS="$save_LDFLAGS" +- +-fi +-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_CXX" >&5 +-echo "${ECHO_T}$lt_prog_compiler_static_works_CXX" >&6; } +- +-if test x"$lt_prog_compiler_static_works_CXX" = xyes; then +- : +-else +- lt_prog_compiler_static_CXX= +-fi +- +- +-{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } +-if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- lt_cv_prog_compiler_c_o_CXX=no +- $rm -r conftest 2>/dev/null +- mkdir conftest +- cd conftest +- mkdir out +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext +- +- lt_compiler_flag="-o out/conftest2.$ac_objext" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ +- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:12841: $lt_compile\"" >&5) +- (eval "$lt_compile" 2>out/conftest.err) +- ac_status=$? +- cat out/conftest.err >&5 +- echo "$as_me:12845: \$? = $ac_status" >&5 +- if (exit $ac_status) && test -s out/conftest2.$ac_objext +- then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp +- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 +- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then +- lt_cv_prog_compiler_c_o_CXX=yes +- fi +- fi +- chmod u+w . 2>&5 +- $rm conftest* +- # SGI C++ compiler will create directory out/ii_files/ for +- # template instantiation +- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files +- $rm out/* && rmdir out +- cd .. +- rmdir conftest +- $rm conftest* +- +-fi +-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5 +-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6; } +- +- +-hard_links="nottested" +-if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then +- # do not overwrite the value of need_locks provided by the user +- { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } +- hard_links=yes +- $rm conftest* +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- touch conftest.a +- ln conftest.a conftest.b 2>&5 || hard_links=no +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- { echo "$as_me:$LINENO: result: $hard_links" >&5 +-echo "${ECHO_T}$hard_links" >&6; } +- if test "$hard_links" = no; then +- { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} +- need_locks=warn +- fi +-else +- need_locks=no +-fi +- +-{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } +- +- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- case $host_os in +- aix4* | aix5*) +- # If we're using GNU nm, then we don't want the "-C" option. +- # -C means demangle to AIX nm, but means don't demangle with GNU nm +- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then +- export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' +- else +- export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' +- fi +- ;; +- pw32*) +- export_symbols_cmds_CXX="$ltdll_cmds" +- ;; +- cygwin* | mingw*) +- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' +- ;; +- *) +- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- ;; +- esac +- +-{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 +-echo "${ECHO_T}$ld_shlibs_CXX" >&6; } +-test "$ld_shlibs_CXX" = no && can_build_shared=no +- +-# +-# Do we need to explicitly link libc? +-# +-case "x$archive_cmds_need_lc_CXX" in +-x|xyes) +- # Assume -lc should be added +- archive_cmds_need_lc_CXX=yes +- +- if test "$enable_shared" = yes && test "$GCC" = yes; then +- case $archive_cmds_CXX in +- *'~'*) +- # FIXME: we may have to deal with multi-command sequences. +- ;; +- '$CC '*) +- # Test whether the compiler implicitly links with -lc since on some +- # systems, -lgcc has to come before -lc. If gcc already passes -lc +- # to ld, don't add -lc before -lgcc. +- { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } +- $rm conftest* +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext +- +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } 2>conftest.err; then +- soname=conftest +- lib=conftest +- libobjs=conftest.$ac_objext +- deplibs= +- wl=$lt_prog_compiler_wl_CXX +- pic_flag=$lt_prog_compiler_pic_CXX +- compiler_flags=-v +- linker_flags=-v +- verstring= +- output_objdir=. +- libname=conftest +- lt_save_allow_undefined_flag=$allow_undefined_flag_CXX +- allow_undefined_flag_CXX= +- if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 +- (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +- then +- archive_cmds_need_lc_CXX=no +- else +- archive_cmds_need_lc_CXX=yes +- fi +- allow_undefined_flag_CXX=$lt_save_allow_undefined_flag +- else +- cat conftest.err 1>&5 +- fi +- $rm conftest* +- { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5 +-echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6; } +- ;; +- esac +- fi +- ;; +-esac +- +-{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } +-library_names_spec= +-libname_spec='lib$name' +-soname_spec= +-shrext_cmds=".so" +-postinstall_cmds= +-postuninstall_cmds= +-finish_cmds= +-finish_eval= +-shlibpath_var= +-shlibpath_overrides_runpath=unknown +-version_type=none +-dynamic_linker="$host_os ld.so" +-sys_lib_dlsearch_path_spec="/lib /usr/lib" +- +-need_lib_prefix=unknown +-hardcode_into_libs=no +- +-# when you set need_version to no, make sure it does not cause -set_version +-# flags to be left without arguments +-need_version=unknown +- +-case $host_os in +-aix3*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' +- shlibpath_var=LIBPATH +- +- # AIX 3 has no versioning support, so we append a major version to the name. +- soname_spec='${libname}${release}${shared_ext}$major' +- ;; +- +-aix4* | aix5*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- hardcode_into_libs=yes +- if test "$host_cpu" = ia64; then +- # AIX 5 supports IA64 +- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- else +- # With GCC up to 2.95.x, collect2 would create an import file +- # for dependence libraries. The import file would start with +- # the line `#! .'. This would cause the generated library to +- # depend on `.', always an invalid library. This was fixed in +- # development snapshots of GCC prior to 3.0. +- case $host_os in +- aix4 | aix4.[01] | aix4.[01].*) +- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' +- echo ' yes ' +- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then +- : +- else +- can_build_shared=no +- fi +- ;; +- esac +- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct +- # soname into executable. Probably we can add versioning support to +- # collect2, so additional links can be useful in future. +- if test "$aix_use_runtimelinking" = yes; then +- # If using run time linking (on AIX 4.2 or later) use lib.so +- # instead of lib.a to let people know that these are not +- # typical AIX shared libraries. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- else +- # We preserve .a as extension for shared libraries through AIX4.2 +- # and later when we are not doing run time linking. +- library_names_spec='${libname}${release}.a $libname.a' +- soname_spec='${libname}${release}${shared_ext}$major' +- fi +- shlibpath_var=LIBPATH +- fi +- ;; +- +-amigaos*) +- library_names_spec='$libname.ixlibrary $libname.a' +- # Create ${libname}_ixlibrary.a entries in /sys/libs. +- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' +- ;; +- +-beos*) +- library_names_spec='${libname}${shared_ext}' +- dynamic_linker="$host_os ld.so" +- shlibpath_var=LIBRARY_PATH +- ;; +- +-bsdi[45]*) +- version_type=linux +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" +- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" +- # the default ld.so.conf also contains /usr/contrib/lib and +- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow +- # libtool to hard-code these into programs +- ;; +- +-cygwin* | mingw* | pw32*) +- version_type=windows +- shrext_cmds=".dll" +- need_version=no +- need_lib_prefix=no +- +- case $GCC,$host_os in +- yes,cygwin* | yes,mingw* | yes,pw32*) +- library_names_spec='$libname.dll.a' +- # DLL is installed to $(libdir)/../bin by postinstall_cmds +- postinstall_cmds='base_file=`basename \${file}`~ +- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ +- dldir=$destdir/`dirname \$dlpath`~ +- test -d \$dldir || mkdir -p \$dldir~ +- $install_prog $dir/$dlname \$dldir/$dlname~ +- chmod a+x \$dldir/$dlname' +- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ +- dlpath=$dir/\$dldll~ +- $rm \$dlpath' +- shlibpath_overrides_runpath=yes +- +- case $host_os in +- cygwin*) +- # Cygwin DLLs use 'cyg' prefix rather than 'lib' +- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' +- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" +- ;; +- mingw*) +- # MinGW DLLs use traditional 'lib' prefix +- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' +- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then +- # It is most probably a Windows format PATH printed by +- # mingw gcc, but we are running on Cygwin. Gcc prints its search +- # path with ; separators, and with drive letters. We can handle the +- # drive letters (cygwin fileutils understands them), so leave them, +- # especially as we might pass files found there to a mingw objdump, +- # which wouldn't understand a cygwinified path. Ahh. +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` +- else +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` +- fi +- ;; +- pw32*) +- # pw32 DLLs use 'pw' prefix rather than 'lib' +- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' +- ;; +- esac +- ;; +- +- *) +- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' +- ;; +- esac +- dynamic_linker='Win32 ld.exe' +- # FIXME: first we should search . and the directory the executable is in +- shlibpath_var=PATH +- ;; +- +-darwin* | rhapsody*) +- dynamic_linker="$host_os dyld" +- version_type=darwin +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' +- soname_spec='${libname}${release}${major}$shared_ext' +- shlibpath_overrides_runpath=yes +- shlibpath_var=DYLD_LIBRARY_PATH +- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' +- +- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' +- ;; +- +-dgux*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- ;; +- +-freebsd1*) +- dynamic_linker=no +- ;; +- +-freebsd* | dragonfly*) +- # DragonFly does not have aout. When/if they implement a new +- # versioning mechanism, adjust this. +- if test -x /usr/bin/objformat; then +- objformat=`/usr/bin/objformat` +- else +- case $host_os in +- freebsd[123]*) objformat=aout ;; +- *) objformat=elf ;; +- esac +- fi +- version_type=freebsd-$objformat +- case $version_type in +- freebsd-elf*) +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' +- need_version=no +- need_lib_prefix=no +- ;; +- freebsd-*) +- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' +- need_version=yes +- ;; +- esac +- shlibpath_var=LD_LIBRARY_PATH +- case $host_os in +- freebsd2*) +- shlibpath_overrides_runpath=yes +- ;; +- freebsd3.[01]* | freebsdelf3.[01]*) +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; +- freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ +- freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- ;; +- *) # from 4.6 on, and DragonFly +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; +- esac +- ;; +- +-gnu*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- hardcode_into_libs=yes +- ;; +- +-hpux9* | hpux10* | hpux11*) +- # Give a soname corresponding to the major version so that dld.sl refuses to +- # link against other versions. +- version_type=sunos +- need_lib_prefix=no +- need_version=no +- case $host_cpu in +- ia64*) +- shrext_cmds='.so' +- hardcode_into_libs=yes +- dynamic_linker="$host_os dld.so" +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- if test "X$HPUX_IA64_MODE" = X32; then +- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" +- else +- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" +- fi +- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec +- ;; +- hppa*64*) +- shrext_cmds='.sl' +- hardcode_into_libs=yes +- dynamic_linker="$host_os dld.sl" +- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH +- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" +- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec +- ;; +- *) +- shrext_cmds='.sl' +- dynamic_linker="$host_os dld.sl" +- shlibpath_var=SHLIB_PATH +- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- ;; +- esac +- # HP-UX runs *really* slowly unless shared libraries are mode 555. +- postinstall_cmds='chmod 555 $lib' +- ;; +- +-interix[3-9]*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- ;; +- +-irix5* | irix6* | nonstopux*) +- case $host_os in +- nonstopux*) version_type=nonstopux ;; +- *) +- if test "$lt_cv_prog_gnu_ld" = yes; then +- version_type=linux +- else +- version_type=irix +- fi ;; +- esac +- need_lib_prefix=no +- need_version=no +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' +- case $host_os in +- irix5* | nonstopux*) +- libsuff= shlibsuff= +- ;; +- *) +- case $LD in # libtool.m4 will add one of these switches to LD +- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") +- libsuff= shlibsuff= libmagic=32-bit;; +- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") +- libsuff=32 shlibsuff=N32 libmagic=N32;; +- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") +- libsuff=64 shlibsuff=64 libmagic=64-bit;; +- *) libsuff= shlibsuff= libmagic=never-match;; +- esac +- ;; +- esac +- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" +- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" +- hardcode_into_libs=yes +- ;; +- +-# No shared lib support for Linux oldld, aout, or coff. +-linux*oldld* | linux*aout* | linux*coff*) +- dynamic_linker=no +- ;; +- +-# This must be Linux ELF. +-linux* | k*bsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- # This implies no fast_install, which is unacceptable. +- # Some rework will be needed to allow for fast_install +- # before this can be enabled. +- hardcode_into_libs=yes +- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" +- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" +- +- # Append ld.so.conf contents to the search path +- if test -f /etc/ld.so.conf; then +- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" +- fi +- +- # We used to test for /lib/ld.so.1 and disable shared libraries on +- # powerpc, because MkLinux only supported shared libraries with the +- # GNU dynamic linker. Since this was broken with cross compilers, +- # most powerpc-linux boxes support dynamic linking these days and +- # people can always --disable-shared, the test was removed, and we +- # assume the GNU/Linux dynamic linker is in use. +- dynamic_linker='GNU/Linux ld.so' +- ;; +- +-netbsd*) +- version_type=sunos +- need_lib_prefix=no +- need_version=no +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- dynamic_linker='NetBSD (a.out) ld.so' +- else +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- dynamic_linker='NetBSD ld.elf_so' +- fi +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; +- +-newsos6) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- ;; +- +-nto-qnx*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- ;; +- +-openbsd*) +- version_type=sunos +- sys_lib_dlsearch_path_spec="/usr/lib" +- need_lib_prefix=no +- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. +- case $host_os in +- openbsd3.3 | openbsd3.3.*) need_version=yes ;; +- *) need_version=no ;; +- esac +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- case $host_os in +- openbsd2.[89] | openbsd2.[89].*) +- shlibpath_overrides_runpath=no +- ;; +- *) +- shlibpath_overrides_runpath=yes +- ;; +- esac +- else +- shlibpath_overrides_runpath=yes +- fi +- ;; +- +-os2*) +- libname_spec='$name' +- shrext_cmds=".dll" +- need_lib_prefix=no +- library_names_spec='$libname${shared_ext} $libname.a' +- dynamic_linker='OS/2 ld.exe' +- shlibpath_var=LIBPATH +- ;; +- +-osf3* | osf4* | osf5*) +- version_type=osf +- need_lib_prefix=no +- need_version=no +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" +- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" +- ;; +- +-rdos*) +- dynamic_linker=no +- ;; +- +-solaris*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- # ldd complains unless libraries are executable +- postinstall_cmds='chmod +x $lib' +- ;; +- +-sunos4*) +- version_type=sunos +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- if test "$with_gnu_ld" = yes; then +- need_lib_prefix=no +- fi +- need_version=yes +- ;; +- +-sysv4 | sysv4.3*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- case $host_vendor in +- sni) +- shlibpath_overrides_runpath=no +- need_lib_prefix=no +- export_dynamic_flag_spec='${wl}-Blargedynsym' +- runpath_var=LD_RUN_PATH +- ;; +- siemens) +- need_lib_prefix=no +- ;; +- motorola) +- need_lib_prefix=no +- need_version=no +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' +- ;; +- esac +- ;; +- +-sysv4*MP*) +- if test -d /usr/nec ;then +- version_type=linux +- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' +- soname_spec='$libname${shared_ext}.$major' +- shlibpath_var=LD_LIBRARY_PATH +- fi +- ;; +- +-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) +- version_type=freebsd-elf +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- hardcode_into_libs=yes +- if test "$with_gnu_ld" = yes; then +- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' +- shlibpath_overrides_runpath=no +- else +- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' +- shlibpath_overrides_runpath=yes +- case $host_os in +- sco3.2v5*) +- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" +- ;; +- esac +- fi +- sys_lib_dlsearch_path_spec='/usr/lib' +- ;; +- +-uts4*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- ;; +- +-*) +- dynamic_linker=no +- ;; ++ # Double quotes because CPP needs to be expanded ++ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" ++ do ++ ac_preproc_ok=false ++for ac_c_preproc_warn_flag in '' yes ++do ++ # Use a header file that comes with gcc, so configuring glibc ++ # with a fresh cross-compiler works. ++ # Prefer to if __STDC__ is defined, since ++ # exists even on freestanding compilers. ++ # On the NeXT, cc -E runs the code through the compiler's parser, ++ # not just through cpp. "Syntax error" is here to catch this case. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ Syntax error ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; + esac +-{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +-echo "${ECHO_T}$dynamic_linker" >&6; } +-test "$dynamic_linker" = no && can_build_shared=no ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ : ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +-if test "$GCC" = yes; then +- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" ++ # Broken: fails on valid input. ++continue + fi + +-{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } +-hardcode_action_CXX= +-if test -n "$hardcode_libdir_flag_spec_CXX" || \ +- test -n "$runpath_var_CXX" || \ +- test "X$hardcode_automatic_CXX" = "Xyes" ; then ++rm -f conftest.err conftest.$ac_ext + +- # We can hardcode non-existant directories. +- if test "$hardcode_direct_CXX" != no && +- # If the only mechanism to avoid hardcoding is shlibpath_var, we +- # have to relink, otherwise we might link with an installed library +- # when we should be linking with a yet-to-be-installed one +- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no && +- test "$hardcode_minus_L_CXX" != no; then +- # Linking always hardcodes the temporary library directory. +- hardcode_action_CXX=relink +- else +- # We can link without hardcoding, and we can hardcode nonexisting dirs. +- hardcode_action_CXX=immediate +- fi ++ # OK, works on sane cases. Now check whether nonexistent headers ++ # can be detected and how. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ # Broken: success on invalid input. ++continue + else +- # We cannot hardcode anything, or else we can only hardcode existing +- # directories. +- hardcode_action_CXX=unsupported +-fi +-{ echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5 +-echo "${ECHO_T}$hardcode_action_CXX" >&6; } ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-if test "$hardcode_action_CXX" = relink; then +- # Fast installation is not supported +- enable_fast_install=no +-elif test "$shlibpath_overrides_runpath" = yes || +- test "$enable_shared" = no; then +- # Fast installation is not necessary +- enable_fast_install=needless ++ # Passes both tests. ++ac_preproc_ok=: ++break + fi + ++rm -f conftest.err conftest.$ac_ext + +-# The else clause should only fire when bootstrapping the +-# libtool distribution, otherwise you forgot to ship ltmain.sh +-# with your package, and you will get complaints that there are +-# no rules to generate ltmain.sh. +-if test -f "$ltmain"; then +- # See if we are running on zsh, and set the options which allow our commands through +- # without removal of \ escapes. +- if test -n "${ZSH_VERSION+set}" ; then +- setopt NO_GLOB_SUBST +- fi +- # Now quote all the things that may contain metacharacters while being +- # careful not to overquote the AC_SUBSTed values. We take copies of the +- # variables and quote the copies for generation of the libtool script. +- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ +- SED SHELL STRIP \ +- libname_spec library_names_spec soname_spec extract_expsyms_cmds \ +- old_striplib striplib file_magic_cmd finish_cmds finish_eval \ +- deplibs_check_method reload_flag reload_cmds need_locks \ +- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ +- lt_cv_sys_global_symbol_to_c_name_address \ +- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ +- old_postinstall_cmds old_postuninstall_cmds \ +- compiler_CXX \ +- CC_CXX \ +- LD_CXX \ +- lt_prog_compiler_wl_CXX \ +- lt_prog_compiler_pic_CXX \ +- lt_prog_compiler_static_CXX \ +- lt_prog_compiler_no_builtin_flag_CXX \ +- export_dynamic_flag_spec_CXX \ +- thread_safe_flag_spec_CXX \ +- whole_archive_flag_spec_CXX \ +- enable_shared_with_static_runtimes_CXX \ +- old_archive_cmds_CXX \ +- old_archive_from_new_cmds_CXX \ +- predep_objects_CXX \ +- postdep_objects_CXX \ +- predeps_CXX \ +- postdeps_CXX \ +- compiler_lib_search_path_CXX \ +- archive_cmds_CXX \ +- archive_expsym_cmds_CXX \ +- postinstall_cmds_CXX \ +- postuninstall_cmds_CXX \ +- old_archive_from_expsyms_cmds_CXX \ +- allow_undefined_flag_CXX \ +- no_undefined_flag_CXX \ +- export_symbols_cmds_CXX \ +- hardcode_libdir_flag_spec_CXX \ +- hardcode_libdir_flag_spec_ld_CXX \ +- hardcode_libdir_separator_CXX \ +- hardcode_automatic_CXX \ +- module_cmds_CXX \ +- module_expsym_cmds_CXX \ +- lt_cv_prog_compiler_c_o_CXX \ +- fix_srcfile_path_CXX \ +- exclude_expsyms_CXX \ +- include_expsyms_CXX; do +- +- case $var in +- old_archive_cmds_CXX | \ +- old_archive_from_new_cmds_CXX | \ +- archive_cmds_CXX | \ +- archive_expsym_cmds_CXX | \ +- module_cmds_CXX | \ +- module_expsym_cmds_CXX | \ +- old_archive_from_expsyms_cmds_CXX | \ +- export_symbols_cmds_CXX | \ +- extract_expsyms_cmds | reload_cmds | finish_cmds | \ +- postinstall_cmds | postuninstall_cmds | \ +- old_postinstall_cmds | old_postuninstall_cmds | \ +- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) +- # Double-quote double-evaled strings. +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" +- ;; +- *) +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" +- ;; +- esac +- done +- +- case $lt_echo in +- *'\$0 --fallback-echo"') +- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` +- ;; +- esac +- +-cfgfile="$ofile" +- +- cat <<__EOF__ >> "$cfgfile" +-# ### BEGIN LIBTOOL TAG CONFIG: $tagname +- +-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +- +-# Shell to use when invoking shell scripts. +-SHELL=$lt_SHELL +- +-# Whether or not to build shared libraries. +-build_libtool_libs=$enable_shared +- +-# Whether or not to build static libraries. +-build_old_libs=$enable_static +- +-# Whether or not to add -lc for building shared libraries. +-build_libtool_need_lc=$archive_cmds_need_lc_CXX +- +-# Whether or not to disallow shared libs when runtime libs are static +-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX ++done ++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. ++rm -f conftest.err conftest.$ac_ext ++if $ac_preproc_ok; then ++ break ++fi + +-# Whether or not to optimize for fast installation. +-fast_install=$enable_fast_install ++ done ++ ac_cv_prog_CPP=$CPP + +-# The host system. +-host_alias=$host_alias +-host=$host +-host_os=$host_os ++fi ++ CPP=$ac_cv_prog_CPP ++else ++ ac_cv_prog_CPP=$CPP ++fi ++{ echo "$as_me:$LINENO: result: $CPP" >&5 ++echo "${ECHO_T}$CPP" >&6; } ++ac_preproc_ok=false ++for ac_c_preproc_warn_flag in '' yes ++do ++ # Use a header file that comes with gcc, so configuring glibc ++ # with a fresh cross-compiler works. ++ # Prefer to if __STDC__ is defined, since ++ # exists even on freestanding compilers. ++ # On the NeXT, cc -E runs the code through the compiler's parser, ++ # not just through cpp. "Syntax error" is here to catch this case. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ Syntax error ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ : ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-# The build system. +-build_alias=$build_alias +-build=$build +-build_os=$build_os ++ # Broken: fails on valid input. ++continue ++fi + +-# An echo program that does not interpret backslashes. +-echo=$lt_echo ++rm -f conftest.err conftest.$ac_ext + +-# The archiver. +-AR=$lt_AR +-AR_FLAGS=$lt_AR_FLAGS ++ # OK, works on sane cases. Now check whether nonexistent headers ++ # can be detected and how. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ # Broken: success on invalid input. ++continue ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-# A C compiler. +-LTCC=$lt_LTCC ++ # Passes both tests. ++ac_preproc_ok=: ++break ++fi + +-# LTCC compiler flags. +-LTCFLAGS=$lt_LTCFLAGS ++rm -f conftest.err conftest.$ac_ext + +-# A language-specific compiler. +-CC=$lt_compiler_CXX ++done ++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. ++rm -f conftest.err conftest.$ac_ext ++if $ac_preproc_ok; then ++ : ++else ++ { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check ++See \`config.log' for more details." >&5 ++echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++fi + +-# Is the compiler the GNU C compiler? +-with_gcc=$GCC_CXX ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu + +-# An ERE matcher. +-EGREP=$lt_EGREP + +-# The linker used to build libraries. +-LD=$lt_LD_CXX ++{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5 ++echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } ++if test "${ac_cv_header_stdc+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++#include ++#include ++#include + +-# Whether we need hard or soft links. +-LN_S=$lt_LN_S ++int ++main () ++{ + +-# A BSD-compatible nm program. +-NM=$lt_NM ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_header_stdc=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-# A symbol stripping program +-STRIP=$lt_STRIP ++ ac_cv_header_stdc=no ++fi + +-# Used to examine libraries when file_magic_cmd begins "file" +-MAGIC_CMD=$MAGIC_CMD ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +-# Used on cygwin: DLL creation program. +-DLLTOOL="$DLLTOOL" ++if test $ac_cv_header_stdc = yes; then ++ # SunOS 4.x string.h does not declare mem*, contrary to ANSI. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include + +-# Used on cygwin: object dumper. +-OBJDUMP="$OBJDUMP" ++_ACEOF ++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | ++ $EGREP "memchr" >/dev/null 2>&1; then ++ : ++else ++ ac_cv_header_stdc=no ++fi ++rm -f conftest* + +-# Used on cygwin: assembler. +-AS="$AS" ++fi + +-# The name of the directory that contains temporary libtool files. +-objdir=$objdir ++if test $ac_cv_header_stdc = yes; then ++ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include + +-# How to create reloadable object files. +-reload_flag=$lt_reload_flag +-reload_cmds=$lt_reload_cmds ++_ACEOF ++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | ++ $EGREP "free" >/dev/null 2>&1; then ++ : ++else ++ ac_cv_header_stdc=no ++fi ++rm -f conftest* + +-# How to pass a linker flag through the compiler. +-wl=$lt_lt_prog_compiler_wl_CXX ++fi + +-# Object file suffix (normally "o"). +-objext="$ac_objext" ++if test $ac_cv_header_stdc = yes; then ++ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. ++ if test "$cross_compiling" = yes; then ++ : ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++#include ++#if ((' ' & 0x0FF) == 0x020) ++# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') ++# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) ++#else ++# define ISLOWER(c) \ ++ (('a' <= (c) && (c) <= 'i') \ ++ || ('j' <= (c) && (c) <= 'r') \ ++ || ('s' <= (c) && (c) <= 'z')) ++# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) ++#endif + +-# Old archive suffix (normally "a"). +-libext="$libext" ++#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) ++int ++main () ++{ ++ int i; ++ for (i = 0; i < 256; i++) ++ if (XOR (islower (i), ISLOWER (i)) ++ || toupper (i) != TOUPPER (i)) ++ return 2; ++ return 0; ++} ++_ACEOF ++rm -f conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ac_try='./conftest$ac_exeext' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ : ++else ++ echo "$as_me: program exited with status $ac_status" >&5 ++echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-# Shared library suffix (normally ".so"). +-shrext_cmds='$shrext_cmds' ++( exit $ac_status ) ++ac_cv_header_stdc=no ++fi ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext ++fi + +-# Executable file suffix (normally ""). +-exeext="$exeext" + +-# Additional compiler flags for building library objects. +-pic_flag=$lt_lt_prog_compiler_pic_CXX +-pic_mode=$pic_mode ++fi ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 ++echo "${ECHO_T}$ac_cv_header_stdc" >&6; } ++if test $ac_cv_header_stdc = yes; then + +-# What is the maximum length of a command? +-max_cmd_len=$lt_cv_sys_max_cmd_len ++cat >>confdefs.h <<\_ACEOF ++#define STDC_HEADERS 1 ++_ACEOF + +-# Does compiler simultaneously support -c and -o options? +-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX ++fi + +-# Must we lock files when doing compilation? +-need_locks=$lt_need_locks ++# On IRIX 5.3, sys/types and inttypes.h are conflicting. + +-# Do we need the lib prefix for modules? +-need_lib_prefix=$need_lib_prefix + +-# Do we need a version for libraries? +-need_version=$need_version + +-# Whether dlopen is supported. +-dlopen_support=$enable_dlopen + +-# Whether dlopen of programs is supported. +-dlopen_self=$enable_dlopen_self + +-# Whether dlopen of statically linked programs is supported. +-dlopen_self_static=$enable_dlopen_self_static + +-# Compiler flag to prevent dynamic linking. +-link_static_flag=$lt_lt_prog_compiler_static_CXX + +-# Compiler flag to turn off builtin functions. +-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX + +-# Compiler flag to allow reflexive dlopens. +-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX + +-# Compiler flag to generate shared objects directly from archives. +-whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX ++for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ ++ inttypes.h stdint.h unistd.h ++do ++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++$ac_includes_default + +-# Compiler flag to generate thread-safe objects. +-thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX ++#include <$ac_header> ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ eval "$as_ac_Header=yes" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-# Library versioning type. +-version_type=$version_type ++ eval "$as_ac_Header=no" ++fi + +-# Format of library name prefix. +-libname_spec=$lt_libname_spec ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++if test `eval echo '${'$as_ac_Header'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++_ACEOF + +-# List of archive names. First name is the real one, the rest are links. +-# The last name is the one that the linker finds with -lNAME. +-library_names_spec=$lt_library_names_spec ++fi + +-# The coded name of the library, if different from the real name. +-soname_spec=$lt_soname_spec ++done + +-# Commands used to build and install an old-style archive. +-RANLIB=$lt_RANLIB +-old_archive_cmds=$lt_old_archive_cmds_CXX +-old_postinstall_cmds=$lt_old_postinstall_cmds +-old_postuninstall_cmds=$lt_old_postuninstall_cmds + +-# Create an old-style archive from a shared archive. +-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX + +-# Create a temporary old-style archive to link instead of a shared archive. +-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX ++for ac_header in dlfcn.h ++do ++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++$ac_includes_default + +-# Commands used to build and install a shared archive. +-archive_cmds=$lt_archive_cmds_CXX +-archive_expsym_cmds=$lt_archive_expsym_cmds_CXX +-postinstall_cmds=$lt_postinstall_cmds +-postuninstall_cmds=$lt_postuninstall_cmds ++#include <$ac_header> ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ eval "$as_ac_Header=yes" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-# Commands used to build a loadable module (assumed same as above if empty) +-module_cmds=$lt_module_cmds_CXX +-module_expsym_cmds=$lt_module_expsym_cmds_CXX ++ eval "$as_ac_Header=no" ++fi + +-# Commands to strip libraries. +-old_striplib=$lt_old_striplib +-striplib=$lt_striplib ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++if test `eval echo '${'$as_ac_Header'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++_ACEOF + +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predep_objects=$lt_predep_objects_CXX +- +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdep_objects=$lt_postdep_objects_CXX +- +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predeps=$lt_predeps_CXX +- +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdeps=$lt_postdeps_CXX +- +-# The library search path used internally by the compiler when linking +-# a shared library. +-compiler_lib_search_path=$lt_compiler_lib_search_path_CXX ++fi + +-# Method to check whether dependent libraries are shared objects. +-deplibs_check_method=$lt_deplibs_check_method ++done + +-# Command to use when deplibs_check_method == file_magic. +-file_magic_cmd=$lt_file_magic_cmd + +-# Flag that allows shared libraries with undefined symbols to be built. +-allow_undefined_flag=$lt_allow_undefined_flag_CXX + +-# Flag that forces no undefined symbols. +-no_undefined_flag=$lt_no_undefined_flag_CXX ++# Set options + +-# Commands used to finish a libtool library installation in a directory. +-finish_cmds=$lt_finish_cmds + +-# Same as above, but a single script fragment to be evaled but not shown. +-finish_eval=$lt_finish_eval + +-# Take the output of nm and produce a listing of raw symbols and C names. +-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe ++ enable_dlopen=no + +-# Transform the output of nm in a proper C declaration +-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +-# Transform the output of nm in a C name address pair +-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address ++ enable_win32_dll=no + +-# This is the shared library runtime path variable. +-runpath_var=$runpath_var + +-# This is the shared library path variable. +-shlibpath_var=$shlibpath_var ++ # Check whether --enable-shared was given. ++if test "${enable_shared+set}" = set; then ++ enableval=$enable_shared; p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_shared=yes ;; ++ no) enable_shared=no ;; ++ *) ++ enable_shared=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_shared=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac ++else ++ enable_shared=yes ++fi + +-# Is shlibpath searched before the hard-coded library search path? +-shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +-# How to hardcode a shared library path into an executable. +-hardcode_action=$hardcode_action_CXX + +-# Whether we should hardcode library paths into libraries. +-hardcode_into_libs=$hardcode_into_libs + +-# Flag to hardcode \$libdir into a binary during linking. +-# This must work even if \$libdir does not exist. +-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX + +-# If ld is used when linking, flag to hardcode \$libdir into +-# a binary during linking. This must work even if \$libdir does +-# not exist. +-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX +- +-# Whether we need a single -rpath flag with a separated argument. +-hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX +- +-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +-# resulting binary. +-hardcode_direct=$hardcode_direct_CXX +- +-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +-# resulting binary. +-hardcode_minus_L=$hardcode_minus_L_CXX +- +-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +-# the resulting binary. +-hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX +- +-# Set to yes if building a shared library automatically hardcodes DIR into the library +-# and all subsequent libraries and executables linked against it. +-hardcode_automatic=$hardcode_automatic_CXX + +-# Variables whose values should be saved in libtool wrapper scripts and +-# restored at relink time. +-variables_saved_for_relink="$variables_saved_for_relink" + +-# Whether libtool must link a program against all its dependency libraries. +-link_all_deplibs=$link_all_deplibs_CXX + +-# Compile-time system search path for libraries +-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +-# Run-time system search path for libraries +-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec ++ # Check whether --enable-static was given. ++if test "${enable_static+set}" = set; then ++ enableval=$enable_static; p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_static=yes ;; ++ no) enable_static=no ;; ++ *) ++ enable_static=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_static=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac ++else ++ enable_static=yes ++fi + +-# Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path=$lt_fix_srcfile_path + +-# Set to yes if exported symbols are required. +-always_export_symbols=$always_export_symbols_CXX + +-# The commands to list exported symbols. +-export_symbols_cmds=$lt_export_symbols_cmds_CXX + +-# The commands to extract the exported symbol list from a shared archive. +-extract_expsyms_cmds=$lt_extract_expsyms_cmds + +-# Symbols that should not be listed in the preloaded symbols. +-exclude_expsyms=$lt_exclude_expsyms_CXX + +-# Symbols that must always be exported. +-include_expsyms=$lt_include_expsyms_CXX + +-# ### END LIBTOOL TAG CONFIG: $tagname + +-__EOF__ + + ++# Check whether --with-pic was given. ++if test "${with_pic+set}" = set; then ++ withval=$with_pic; pic_mode="$withval" + else +- # If there is no Makefile yet, we rely on a make rule to execute +- # `config.status --recheck' to rerun these tests and create the +- # libtool script then. +- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` +- if test -f "$ltmain_in"; then +- test -f Makefile && make "$ltmain" +- fi ++ pic_mode=default + fi + + +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu +- +-CC=$lt_save_CC +-LDCXX=$LD +-LD=$lt_save_LD +-GCC=$lt_save_GCC +-with_gnu_ldcxx=$with_gnu_ld +-with_gnu_ld=$lt_save_with_gnu_ld +-lt_cv_path_LDCXX=$lt_cv_path_LD +-lt_cv_path_LD=$lt_save_path_LD +-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld +-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +- +- else +- tagname="" +- fi +- ;; ++test -z "$pic_mode" && pic_mode=default + +- F77) +- if test -n "$F77" && test "X$F77" != "Xno"; then + +-ac_ext=f +-ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' +-ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_f77_compiler_gnu +- +- +-archive_cmds_need_lc_F77=no +-allow_undefined_flag_F77= +-always_export_symbols_F77=no +-archive_expsym_cmds_F77= +-export_dynamic_flag_spec_F77= +-hardcode_direct_F77=no +-hardcode_libdir_flag_spec_F77= +-hardcode_libdir_flag_spec_ld_F77= +-hardcode_libdir_separator_F77= +-hardcode_minus_L_F77=no +-hardcode_automatic_F77=no +-module_cmds_F77= +-module_expsym_cmds_F77= +-link_all_deplibs_F77=unknown +-old_archive_cmds_F77=$old_archive_cmds +-no_undefined_flag_F77= +-whole_archive_flag_spec_F77= +-enable_shared_with_static_runtimes_F77=no + +-# Source file extension for f77 test sources. +-ac_ext=f + +-# Object file extension for compiled f77 test sources. +-objext=o +-objext_F77=$objext + +-# Code to be used in simple compile tests +-lt_simple_compile_test_code="\ +- subroutine t +- return +- end +-" + +-# Code to be used in simple link tests +-lt_simple_link_test_code="\ +- program t +- end +-" + +-# ltmain only uses $CC for tagged configurations so make sure $CC is set. ++ # Check whether --enable-fast-install was given. ++if test "${enable_fast_install+set}" = set; then ++ enableval=$enable_fast_install; p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_fast_install=yes ;; ++ no) enable_fast_install=no ;; ++ *) ++ enable_fast_install=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_fast_install=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac ++else ++ enable_fast_install=yes ++fi + +-# If no C compiler was specified, use CC. +-LTCC=${LTCC-"$CC"} + +-# If no C compiler flags were specified, use CFLAGS. +-LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +-# Allow CC to be a program name with arguments. +-compiler=$CC + + +-# save warnings/boilerplate of simple test code +-ac_outfile=conftest.$ac_objext +-echo "$lt_simple_compile_test_code" >conftest.$ac_ext +-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +-_lt_compiler_boilerplate=`cat conftest.err` +-$rm conftest* + +-ac_outfile=conftest.$ac_objext +-echo "$lt_simple_link_test_code" >conftest.$ac_ext +-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +-_lt_linker_boilerplate=`cat conftest.err` +-$rm conftest* + + +-# Allow CC to be a program name with arguments. +-lt_save_CC="$CC" +-CC=${F77-"f77"} +-compiler=$CC +-compiler_F77=$CC +-for cc_temp in $compiler""; do +- case $cc_temp in +- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; +- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; +- \-*) ;; +- *) break;; +- esac +-done +-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + + +-{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 +-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; } +-{ echo "$as_me:$LINENO: result: $can_build_shared" >&5 +-echo "${ECHO_T}$can_build_shared" >&6; } + +-{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 +-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; } +-test "$can_build_shared" = "no" && enable_shared=no ++# This can be used to rebuild libtool when needed ++LIBTOOL_DEPS="$ltmain" + +-# On AIX, shared libraries and static libraries use the same namespace, and +-# are all built from PIC. +-case $host_os in +-aix3*) +- test "$enable_shared" = yes && enable_static=no +- if test -n "$RANLIB"; then +- archive_cmds="$archive_cmds~\$RANLIB \$lib" +- postinstall_cmds='$RANLIB $lib' +- fi +- ;; +-aix4* | aix5*) +- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then +- test "$enable_shared" = yes && enable_static=no +- fi +- ;; +-esac +-{ echo "$as_me:$LINENO: result: $enable_shared" >&5 +-echo "${ECHO_T}$enable_shared" >&6; } ++# Always use our own libtool. ++LIBTOOL='$(SHELL) $(top_builddir)/libtool' + +-{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5 +-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; } +-# Make sure either enable_shared or enable_static is yes. +-test "$enable_shared" = yes || enable_static=yes +-{ echo "$as_me:$LINENO: result: $enable_static" >&5 +-echo "${ECHO_T}$enable_static" >&6; } + +-GCC_F77="$G77" +-LD_F77="$LD" + +-lt_prog_compiler_wl_F77= +-lt_prog_compiler_pic_F77= +-lt_prog_compiler_static_F77= + +-{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } + +- if test "$GCC" = yes; then +- lt_prog_compiler_wl_F77='-Wl,' +- lt_prog_compiler_static_F77='-static' + +- case $host_os in +- aix*) +- # All AIX code is PIC. +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- lt_prog_compiler_static_F77='-Bstatic' +- fi +- ;; + +- amigaos*) +- # FIXME: we need at least 68020 code to build shared libraries, but +- # adding the `-m68020' flag to GCC prevents building anything better, +- # like `-m68040'. +- lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4' +- ;; + +- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) +- # PIC is the default for these OSes. +- ;; + +- mingw* | cygwin* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- # Although the cygwin gcc ignores -fPIC, still need this for old-style +- # (--disable-auto-import) libraries +- lt_prog_compiler_pic_F77='-DDLL_EXPORT' +- ;; + +- darwin* | rhapsody*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- lt_prog_compiler_pic_F77='-fno-common' +- ;; + +- interix[3-9]*) +- # Interix 3.x gcc -fpic/-fPIC options generate broken code. +- # Instead, we relocate shared libraries at runtime. +- ;; + +- msdosdjgpp*) +- # Just because we use GCC doesn't mean we suddenly get shared libraries +- # on systems that don't support them. +- lt_prog_compiler_can_build_shared_F77=no +- enable_shared=no +- ;; + +- sysv4*MP*) +- if test -d /usr/nec; then +- lt_prog_compiler_pic_F77=-Kconform_pic +- fi +- ;; + +- hpux*) +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case $host_cpu in +- hppa*64*|ia64*) +- # +Z the default +- ;; +- *) +- lt_prog_compiler_pic_F77='-fPIC' +- ;; +- esac +- ;; + +- *) +- lt_prog_compiler_pic_F77='-fPIC' +- ;; +- esac +- else +- # PORTME Check for flag to pass linker flags through the system compiler. +- case $host_os in +- aix*) +- lt_prog_compiler_wl_F77='-Wl,' +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- lt_prog_compiler_static_F77='-Bstatic' +- else +- lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp' +- fi +- ;; +- darwin*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- case $cc_basename in +- xlc*) +- lt_prog_compiler_pic_F77='-qnocommon' +- lt_prog_compiler_wl_F77='-Wl,' +- ;; +- esac +- ;; + +- mingw* | cygwin* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- lt_prog_compiler_pic_F77='-DDLL_EXPORT' +- ;; + +- hpux9* | hpux10* | hpux11*) +- lt_prog_compiler_wl_F77='-Wl,' +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case $host_cpu in +- hppa*64*|ia64*) +- # +Z the default +- ;; +- *) +- lt_prog_compiler_pic_F77='+Z' +- ;; +- esac +- # Is there a better lt_prog_compiler_static that works with the bundled CC? +- lt_prog_compiler_static_F77='${wl}-a ${wl}archive' +- ;; + +- irix5* | irix6* | nonstopux*) +- lt_prog_compiler_wl_F77='-Wl,' +- # PIC (with -KPIC) is the default. +- lt_prog_compiler_static_F77='-non_shared' +- ;; + +- newsos6) +- lt_prog_compiler_pic_F77='-KPIC' +- lt_prog_compiler_static_F77='-Bstatic' +- ;; + +- linux* | k*bsd*-gnu) +- case $cc_basename in +- icc* | ecc*) +- lt_prog_compiler_wl_F77='-Wl,' +- lt_prog_compiler_pic_F77='-KPIC' +- lt_prog_compiler_static_F77='-static' +- ;; +- pgcc* | pgf77* | pgf90* | pgf95*) +- # Portland Group compilers (*not* the Pentium gcc compiler, +- # which looks to be a dead project) +- lt_prog_compiler_wl_F77='-Wl,' +- lt_prog_compiler_pic_F77='-fpic' +- lt_prog_compiler_static_F77='-Bstatic' +- ;; +- ccc*) +- lt_prog_compiler_wl_F77='-Wl,' +- # All Alpha code is PIC. +- lt_prog_compiler_static_F77='-non_shared' +- ;; +- *) +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) +- # Sun C 5.9 +- lt_prog_compiler_pic_F77='-KPIC' +- lt_prog_compiler_static_F77='-Bstatic' +- lt_prog_compiler_wl_F77='-Wl,' +- ;; +- *Sun\ F*) +- # Sun Fortran 8.3 passes all unrecognized flags to the linker +- lt_prog_compiler_pic_F77='-KPIC' +- lt_prog_compiler_static_F77='-Bstatic' +- lt_prog_compiler_wl_F77='' +- ;; +- esac +- ;; +- esac +- ;; + +- osf3* | osf4* | osf5*) +- lt_prog_compiler_wl_F77='-Wl,' +- # All OSF/1 code is PIC. +- lt_prog_compiler_static_F77='-non_shared' +- ;; + +- rdos*) +- lt_prog_compiler_static_F77='-non_shared' +- ;; + +- solaris*) +- lt_prog_compiler_pic_F77='-KPIC' +- lt_prog_compiler_static_F77='-Bstatic' +- case $cc_basename in +- f77* | f90* | f95*) +- lt_prog_compiler_wl_F77='-Qoption ld ';; +- *) +- lt_prog_compiler_wl_F77='-Wl,';; +- esac +- ;; + +- sunos4*) +- lt_prog_compiler_wl_F77='-Qoption ld ' +- lt_prog_compiler_pic_F77='-PIC' +- lt_prog_compiler_static_F77='-Bstatic' +- ;; + +- sysv4 | sysv4.2uw2* | sysv4.3*) +- lt_prog_compiler_wl_F77='-Wl,' +- lt_prog_compiler_pic_F77='-KPIC' +- lt_prog_compiler_static_F77='-Bstatic' +- ;; ++test -z "$LN_S" && LN_S="ln -s" ++ + +- sysv4*MP*) +- if test -d /usr/nec ;then +- lt_prog_compiler_pic_F77='-Kconform_pic' +- lt_prog_compiler_static_F77='-Bstatic' +- fi +- ;; + +- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) +- lt_prog_compiler_wl_F77='-Wl,' +- lt_prog_compiler_pic_F77='-KPIC' +- lt_prog_compiler_static_F77='-Bstatic' +- ;; + +- unicos*) +- lt_prog_compiler_wl_F77='-Wl,' +- lt_prog_compiler_can_build_shared_F77=no +- ;; + +- uts4*) +- lt_prog_compiler_pic_F77='-pic' +- lt_prog_compiler_static_F77='-Bstatic' +- ;; + +- *) +- lt_prog_compiler_can_build_shared_F77=no +- ;; +- esac +- fi + +-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6; } + +-# +-# Check to make sure the PIC flag actually works. +-# +-if test -n "$lt_prog_compiler_pic_F77"; then + +-{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5 +-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6; } +-if test "${lt_prog_compiler_pic_works_F77+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- lt_prog_compiler_pic_works_F77=no +- ac_outfile=conftest.$ac_objext +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext +- lt_compiler_flag="$lt_prog_compiler_pic_F77" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- # The option is referenced via a variable to avoid confusing sed. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ +- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:14405: $lt_compile\"" >&5) +- (eval "$lt_compile" 2>conftest.err) +- ac_status=$? +- cat conftest.err >&5 +- echo "$as_me:14409: \$? = $ac_status" >&5 +- if (exit $ac_status) && test -s "$ac_outfile"; then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings other than the usual output. +- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp +- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 +- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then +- lt_prog_compiler_pic_works_F77=yes +- fi +- fi +- $rm conftest* + +-fi +-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_F77" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_works_F77" >&6; } + +-if test x"$lt_prog_compiler_pic_works_F77" = xyes; then +- case $lt_prog_compiler_pic_F77 in +- "" | " "*) ;; +- *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;; +- esac +-else +- lt_prog_compiler_pic_F77= +- lt_prog_compiler_can_build_shared_F77=no +-fi + +-fi +-case $host_os in +- # For platforms which do not support PIC, -DPIC is meaningless: +- *djgpp*) +- lt_prog_compiler_pic_F77= +- ;; +- *) +- lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77" +- ;; +-esac + +-# +-# Check to make sure the static flag actually works. +-# +-wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\" +-{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } +-if test "${lt_prog_compiler_static_works_F77+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- lt_prog_compiler_static_works_F77=no +- save_LDFLAGS="$LDFLAGS" +- LDFLAGS="$LDFLAGS $lt_tmp_static_flag" +- echo "$lt_simple_link_test_code" > conftest.$ac_ext +- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then +- # The linker can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test -s conftest.err; then +- # Append any errors to the config.log. +- cat conftest.err 1>&5 +- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp +- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 +- if diff conftest.exp conftest.er2 >/dev/null; then +- lt_prog_compiler_static_works_F77=yes +- fi +- else +- lt_prog_compiler_static_works_F77=yes +- fi +- fi +- $rm conftest* +- LDFLAGS="$save_LDFLAGS" + ++if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST + fi +-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_F77" >&5 +-echo "${ECHO_T}$lt_prog_compiler_static_works_F77" >&6; } + +-if test x"$lt_prog_compiler_static_works_F77" = xyes; then +- : ++{ echo "$as_me:$LINENO: checking for objdir" >&5 ++echo $ECHO_N "checking for objdir... $ECHO_C" >&6; } ++if test "${lt_cv_objdir+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ rm -f .libs 2>/dev/null ++mkdir .libs 2>/dev/null ++if test -d .libs; then ++ lt_cv_objdir=.libs + else +- lt_prog_compiler_static_F77= ++ # MS-DOS does not allow filenames that begin with a dot. ++ lt_cv_objdir=_libs ++fi ++rmdir .libs 2>/dev/null + fi ++{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 ++echo "${ECHO_T}$lt_cv_objdir" >&6; } ++objdir=$lt_cv_objdir + + +-{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } +-if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- lt_cv_prog_compiler_c_o_F77=no +- $rm -r conftest 2>/dev/null +- mkdir conftest +- cd conftest +- mkdir out +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext + +- lt_compiler_flag="-o out/conftest2.$ac_objext" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ +- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:14509: $lt_compile\"" >&5) +- (eval "$lt_compile" 2>out/conftest.err) +- ac_status=$? +- cat out/conftest.err >&5 +- echo "$as_me:14513: \$? = $ac_status" >&5 +- if (exit $ac_status) && test -s out/conftest2.$ac_objext +- then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp +- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 +- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then +- lt_cv_prog_compiler_c_o_F77=yes +- fi +- fi +- chmod u+w . 2>&5 +- $rm conftest* +- # SGI C++ compiler will create directory out/ii_files/ for +- # template instantiation +- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files +- $rm out/* && rmdir out +- cd .. +- rmdir conftest +- $rm conftest* + +-fi +-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5 +-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6; } + ++cat >>confdefs.h <<_ACEOF ++#define LT_OBJDIR "$lt_cv_objdir/" ++_ACEOF + +-hard_links="nottested" +-if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then +- # do not overwrite the value of need_locks provided by the user +- { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } +- hard_links=yes +- $rm conftest* +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- touch conftest.a +- ln conftest.a conftest.b 2>&5 || hard_links=no +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- { echo "$as_me:$LINENO: result: $hard_links" >&5 +-echo "${ECHO_T}$hard_links" >&6; } +- if test "$hard_links" = no; then +- { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} +- need_locks=warn ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++case $host_os in ++aix3*) ++ # AIX sometimes has problems with the GCC collect2 program. For some ++ # reason, if we set the COLLECT_NAMES environment variable, the problems ++ # vanish in a puff of smoke. ++ if test "X${COLLECT_NAMES+set}" != Xset; then ++ COLLECT_NAMES= ++ export COLLECT_NAMES + fi +-else +- need_locks=no +-fi ++ ;; ++esac + +-{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } ++# Sed substitution that helps us do robust quoting. It backslashifies ++# metacharacters that are still active within double-quoted strings. ++sed_quote_subst='s/\(["`$\\]\)/\\\1/g' + +- runpath_var= +- allow_undefined_flag_F77= +- enable_shared_with_static_runtimes_F77=no +- archive_cmds_F77= +- archive_expsym_cmds_F77= +- old_archive_From_new_cmds_F77= +- old_archive_from_expsyms_cmds_F77= +- export_dynamic_flag_spec_F77= +- whole_archive_flag_spec_F77= +- thread_safe_flag_spec_F77= +- hardcode_libdir_flag_spec_F77= +- hardcode_libdir_flag_spec_ld_F77= +- hardcode_libdir_separator_F77= +- hardcode_direct_F77=no +- hardcode_minus_L_F77=no +- hardcode_shlibpath_var_F77=unsupported +- link_all_deplibs_F77=unknown +- hardcode_automatic_F77=no +- module_cmds_F77= +- module_expsym_cmds_F77= +- always_export_symbols_F77=no +- export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- # include_expsyms should be a list of space-separated symbols to be *always* +- # included in the symbol list +- include_expsyms_F77= +- # exclude_expsyms can be an extended regexp of symbols to exclude +- # it will be wrapped by ` (' and `)$', so one must not match beginning or +- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', +- # as well as any symbol that contains `d'. +- exclude_expsyms_F77="_GLOBAL_OFFSET_TABLE_" +- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out +- # platforms (ab)use it in PIC code, but their linkers get confused if +- # the symbol is explicitly referenced. Since portable code cannot +- # rely on this symbol name, it's probably fine to never include it in +- # preloaded symbol tables. +- extract_expsyms_cmds= +- # Just being paranoid about ensuring that cc_basename is set. +- for cc_temp in $compiler""; do +- case $cc_temp in +- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; +- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; +- \-*) ;; +- *) break;; +- esac +-done +-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++# Same as above, but do not quote variable references. ++double_quote_subst='s/\(["`\\]\)/\\\1/g' ++ ++# Sed substitution to delay expansion of an escaped shell variable in a ++# double_quote_subst'ed string. ++delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +- case $host_os in +- cygwin* | mingw* | pw32*) +- # FIXME: the MSVC++ port hasn't been tested in a loooong time +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- if test "$GCC" != yes; then +- with_gnu_ld=no +- fi +- ;; +- interix*) +- # we just hope/assume this is gcc and not c89 (= MSVC++) +- with_gnu_ld=yes +- ;; +- openbsd*) +- with_gnu_ld=no +- ;; +- esac ++# Sed substitution to delay expansion of an escaped single quote. ++delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +- ld_shlibs_F77=yes +- if test "$with_gnu_ld" = yes; then +- # If archive_cmds runs LD, not CC, wlarc should be empty +- wlarc='${wl}' ++# Sed substitution to avoid accidental globbing in evaled expressions ++no_glob_subst='s/\*/\\\*/g' + +- # Set some defaults for GNU ld with shared library support. These +- # are reset later if shared libraries are not supported. Putting them +- # here allows them to be overridden if necessary. +- runpath_var=LD_RUN_PATH +- hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir' +- export_dynamic_flag_spec_F77='${wl}--export-dynamic' +- # ancient GNU ld didn't support --whole-archive et. al. +- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then +- whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- else +- whole_archive_flag_spec_F77= +- fi +- supports_anon_versioning=no +- case `$LD -v 2>/dev/null` in +- *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 +- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... +- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... +- *\ 2.11.*) ;; # other 2.11 versions +- *) supports_anon_versioning=yes ;; +- esac ++# Global variables: ++ofile=libtool ++can_build_shared=yes + +- # See if GNU ld supports shared libraries. +- case $host_os in +- aix3* | aix4* | aix5*) +- # On AIX/PPC, the GNU linker is very broken +- if test "$host_cpu" != ia64; then +- ld_shlibs_F77=no +- cat <&2 ++# All known linkers require a `.a' archive for static linking (except MSVC, ++# which needs '.lib'). ++libext=a + +-*** Warning: the GNU linker, at least up to release 2.9.1, is reported +-*** to be unable to reliably create shared libraries on AIX. +-*** Therefore, libtool is disabling shared libraries support. If you +-*** really care for shared libraries, you may want to modify your PATH +-*** so that a non-GNU linker is found, and then restart. ++with_gnu_ld="$lt_cv_prog_gnu_ld" + +-EOF +- fi +- ;; ++old_CC="$CC" ++old_CFLAGS="$CFLAGS" + +- amigaos*) +- archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- hardcode_libdir_flag_spec_F77='-L$libdir' +- hardcode_minus_L_F77=yes +- +- # Samuel A. Falvo II reports +- # that the semantics of dynamic libraries on AmigaOS, at least up +- # to version 4, is to share data among multiple programs linked +- # with the same dynamic library. Since this doesn't match the +- # behavior of shared libraries on other platforms, we can't use +- # them. +- ld_shlibs_F77=no +- ;; ++# Set sane defaults for various variables ++test -z "$CC" && CC=cc ++test -z "$LTCC" && LTCC=$CC ++test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS ++test -z "$LD" && LD=ld ++test -z "$ac_objext" && ac_objext=o + +- beos*) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- allow_undefined_flag_F77=unsupported +- # Joseph Beckenbach says some releases of gcc +- # support --undefined. This deserves some investigation. FIXME +- archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- else +- ld_shlibs_F77=no +- fi +- ;; ++for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + +- cygwin* | mingw* | pw32*) +- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless, +- # as there is no search path for DLLs. +- hardcode_libdir_flag_spec_F77='-L$libdir' +- allow_undefined_flag_F77=unsupported +- always_export_symbols_F77=no +- enable_shared_with_static_runtimes_F77=yes +- export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + +- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then +- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- # If the export-symbols file already is a .def file (1st line +- # is EXPORTS), use it as is; otherwise, prepend... +- archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +- cp $export_symbols $output_objdir/$soname.def; +- else +- echo EXPORTS > $output_objdir/$soname.def; +- cat $export_symbols >> $output_objdir/$soname.def; +- fi~ +- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- else +- ld_shlibs_F77=no +- fi +- ;; ++# Only perform the check for file, if the check method requires it ++test -z "$MAGIC_CMD" && MAGIC_CMD=file ++case $deplibs_check_method in ++file_magic*) ++ if test "$file_magic_cmd" = '$MAGIC_CMD'; then ++ { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 ++echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; } ++if test "${lt_cv_path_MAGIC_CMD+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $MAGIC_CMD in ++[\\/*] | ?:[\\/]*) ++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ++ ;; ++*) ++ lt_save_MAGIC_CMD="$MAGIC_CMD" ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" ++ for ac_dir in $ac_dummy; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/${ac_tool_prefix}file; then ++ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" ++ if test -n "$file_magic_test_file"; then ++ case $deplibs_check_method in ++ "file_magic "*) ++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` ++ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | ++ $EGREP "$file_magic_regex" > /dev/null; then ++ : ++ else ++ cat <<_LT_EOF 1>&2 + +- interix[3-9]*) +- hardcode_direct_F77=no +- hardcode_shlibpath_var_F77=no +- hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' +- export_dynamic_flag_spec_F77='${wl}-E' +- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. +- # Instead, shared libraries are loaded at an image base (0x10000000 by +- # default) and relocated if they conflict, which is a slow very memory +- # consuming and fragmenting process. To avoid this, we pick a random, +- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link +- # time. Moving up from 0x10000000 also allows more sbrk(2) space. +- archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' +- archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' +- ;; ++*** Warning: the command libtool uses to detect shared libraries, ++*** $file_magic_cmd, produces output that libtool cannot recognize. ++*** The result is that libtool may fail to recognize shared libraries ++*** as such. This will affect the creation of libtool libraries that ++*** depend on shared libraries, but programs linked with such libtool ++*** libraries will work regardless of this problem. Nevertheless, you ++*** may want to report the problem to your system manager and/or to ++*** bug-libtool@gnu.org + +- gnu* | linux* | k*bsd*-gnu) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- tmp_addflag= +- case $cc_basename,$host_cpu in +- pgcc*) # Portland Group C compiler +- whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- tmp_addflag=' $pic_flag' +- ;; +- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers +- whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- tmp_addflag=' $pic_flag -Mnomain' ;; +- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 +- tmp_addflag=' -i_dynamic' ;; +- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 +- tmp_addflag=' -i_dynamic -nofor_main' ;; +- ifc* | ifort*) # Intel Fortran compiler +- tmp_addflag=' -nofor_main' ;; +- esac +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) # Sun C 5.9 +- whole_archive_flag_spec_F77='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- tmp_sharedflag='-G' ;; +- *Sun\ F*) # Sun Fortran 8.3 +- tmp_sharedflag='-G' ;; +- *) +- tmp_sharedflag='-shared' ;; ++_LT_EOF ++ fi ;; + esac +- archive_cmds_F77='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- +- if test $supports_anon_versioning = yes; then +- archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~ +- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ +- $echo "local: *; };" >> $output_objdir/$libname.ver~ +- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' +- fi +- else +- ld_shlibs_F77=no + fi +- ;; ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" ++ MAGIC_CMD="$lt_save_MAGIC_CMD" ++ ;; ++esac ++fi + +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' +- wlarc= +- else +- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- fi +- ;; ++MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++if test -n "$MAGIC_CMD"; then ++ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 ++echo "${ECHO_T}$MAGIC_CMD" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi + +- solaris*) +- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then +- ld_shlibs_F77=no +- cat <&2 + +-*** Warning: The releases 2.8.* of the GNU linker cannot reliably +-*** create shared libraries on Solaris systems. Therefore, libtool +-*** is disabling shared libraries support. We urge you to upgrade GNU +-*** binutils to release 2.9.1 or newer. Another option is to modify +-*** your PATH or compiler configuration so that the native linker is +-*** used, and then restart. + +-EOF +- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- ld_shlibs_F77=no +- fi +- ;; + +- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) +- case `$LD -v 2>&1` in +- *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) +- ld_shlibs_F77=no +- cat <<_LT_EOF 1>&2 + +-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +-*** reliably create shared libraries on SCO systems. Therefore, libtool +-*** is disabling shared libraries support. We urge you to upgrade GNU +-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +-*** your PATH or compiler configuration so that the native linker is +-*** used, and then restart. ++if test -z "$lt_cv_path_MAGIC_CMD"; then ++ if test -n "$ac_tool_prefix"; then ++ { echo "$as_me:$LINENO: checking for file" >&5 ++echo $ECHO_N "checking for file... $ECHO_C" >&6; } ++if test "${lt_cv_path_MAGIC_CMD+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $MAGIC_CMD in ++[\\/*] | ?:[\\/]*) ++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ++ ;; ++*) ++ lt_save_MAGIC_CMD="$MAGIC_CMD" ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" ++ for ac_dir in $ac_dummy; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/file; then ++ lt_cv_path_MAGIC_CMD="$ac_dir/file" ++ if test -n "$file_magic_test_file"; then ++ case $deplibs_check_method in ++ "file_magic "*) ++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` ++ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | ++ $EGREP "$file_magic_regex" > /dev/null; then ++ : ++ else ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: the command libtool uses to detect shared libraries, ++*** $file_magic_cmd, produces output that libtool cannot recognize. ++*** The result is that libtool may fail to recognize shared libraries ++*** as such. This will affect the creation of libtool libraries that ++*** depend on shared libraries, but programs linked with such libtool ++*** libraries will work regardless of this problem. Nevertheless, you ++*** may want to report the problem to your system manager and/or to ++*** bug-libtool@gnu.org + + _LT_EOF +- ;; +- *) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' +- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' +- archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' +- else +- ld_shlibs_F77=no +- fi +- ;; +- esac +- ;; ++ fi ;; ++ esac ++ fi ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" ++ MAGIC_CMD="$lt_save_MAGIC_CMD" ++ ;; ++esac ++fi + +- sunos4*) +- archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- wlarc= +- hardcode_direct_F77=yes +- hardcode_shlibpath_var_F77=no +- ;; ++MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++if test -n "$MAGIC_CMD"; then ++ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 ++echo "${ECHO_T}$MAGIC_CMD" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi + +- *) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- ld_shlibs_F77=no +- fi +- ;; +- esac + +- if test "$ld_shlibs_F77" = no; then +- runpath_var= +- hardcode_libdir_flag_spec_F77= +- export_dynamic_flag_spec_F77= +- whole_archive_flag_spec_F77= +- fi + else +- # PORTME fill in a description of your system's linker (not GNU ld) +- case $host_os in +- aix3*) +- allow_undefined_flag_F77=unsupported +- always_export_symbols_F77=yes +- archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' +- # Note: this linker hardcodes the directories in LIBPATH if there +- # are no directories specified by -L. +- hardcode_minus_L_F77=yes +- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then +- # Neither direct hardcoding nor static linking is supported with a +- # broken collect2. +- hardcode_direct_F77=unsupported +- fi +- ;; ++ MAGIC_CMD=: ++ fi ++fi + +- aix4* | aix5*) +- if test "$host_cpu" = ia64; then +- # On IA64, the linker does run time linking by default, so we don't +- # have to do anything special. +- aix_use_runtimelinking=no +- exp_sym_flag='-Bexport' +- no_entry_flag="" +- else +- # If we're using GNU nm, then we don't want the "-C" option. +- # -C means demangle to AIX nm, but means don't demangle with GNU nm +- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then +- export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' +- else +- export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' +- fi +- aix_use_runtimelinking=no ++ fi ++ ;; ++esac + +- # Test if we are trying to use run time linking or normal +- # AIX style linking. If -brtl is somewhere in LDFLAGS, we +- # need to do runtime linking. +- case $host_os in aix4.[23]|aix4.[23].*|aix5*) +- for ld_flag in $LDFLAGS; do +- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then +- aix_use_runtimelinking=yes +- break +- fi +- done +- ;; +- esac ++# Use C for the default configuration in the libtool script + +- exp_sym_flag='-bexport' +- no_entry_flag='-bnoentry' +- fi ++lt_save_CC="$CC" ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu + +- # When large executables or shared objects are built, AIX ld can +- # have problems creating the table of contents. If linking a library +- # or program results in "error TOC overflow" add -mminimal-toc to +- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not +- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + +- archive_cmds_F77='' +- hardcode_direct_F77=yes +- hardcode_libdir_separator_F77=':' +- link_all_deplibs_F77=yes ++# Source file extension for C test sources. ++ac_ext=c + +- if test "$GCC" = yes; then +- case $host_os in aix4.[012]|aix4.[012].*) +- # We only want to do this on AIX 4.2 and lower, the check +- # below for broken collect2 doesn't work under 4.3+ +- collect2name=`${CC} -print-prog-name=collect2` +- if test -f "$collect2name" && \ +- strings "$collect2name" | grep resolve_lib_name >/dev/null +- then +- # We have reworked collect2 +- : +- else +- # We have old collect2 +- hardcode_direct_F77=unsupported +- # It fails to find uninstalled libraries when the uninstalled +- # path is not listed in the libpath. Setting hardcode_minus_L +- # to unsupported forces relinking +- hardcode_minus_L_F77=yes +- hardcode_libdir_flag_spec_F77='-L$libdir' +- hardcode_libdir_separator_F77= +- fi +- ;; +- esac +- shared_flag='-shared' +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag="$shared_flag "'${wl}-G' +- fi +- else +- # not using gcc +- if test "$host_cpu" = ia64; then +- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release +- # chokes on -Wl,-G. The following line is correct: +- shared_flag='-G' +- else +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag='${wl}-G' +- else +- shared_flag='${wl}-bM:SRE' +- fi +- fi +- fi ++# Object file extension for compiled C test sources. ++objext=o ++objext=$objext + +- # It seems that -bexpall does not export symbols beginning with +- # underscore (_), so it is better to generate a list of symbols to export. +- always_export_symbols_F77=yes +- if test "$aix_use_runtimelinking" = yes; then +- # Warning - without using the other runtime loading flags (-brtl), +- # -berok will link without error, but may produce a broken library. +- allow_undefined_flag_F77='-berok' +- # Determine the default libpath from the value encoded in an empty executable. +- cat >conftest.$ac_ext <<_ACEOF +- program main ++# Code to be used in simple compile tests ++lt_simple_compile_test_code="int some_variable = 0;" + +- end +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_f77_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then ++# Code to be used in simple link tests ++lt_simple_link_test_code='int main(){return(0);}' + +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *\(.*\)$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + + +-fi + +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +- hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" +- archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" +- else +- if test "$host_cpu" = ia64; then +- hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib' +- allow_undefined_flag_F77="-z nodefs" +- archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" +- else +- # Determine the default libpath from the value encoded in an empty executable. +- cat >conftest.$ac_ext <<_ACEOF +- program main + +- end +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_f77_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then + +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *\(.*\)$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} + ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +-fi ++# Allow CC to be a program name with arguments. ++compiler=$CC + +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++# Save the default compiler, since it gets overwritten when the other ++# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. ++compiler_DEFAULT=$CC + +- hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" +- # Warning - without using the other run time loading flags, +- # -berok will link without error, but may produce a broken library. +- no_undefined_flag_F77=' ${wl}-bernotok' +- allow_undefined_flag_F77=' ${wl}-berok' +- # Exported symbols can be pulled into shared objects from archives +- whole_archive_flag_spec_F77='$convenience' +- archive_cmds_need_lc_F77=yes +- # This is similar to how AIX traditionally builds its shared libraries. +- archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' +- fi +- fi +- ;; ++# save warnings/boilerplate of simple test code ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_compile_test_code" >conftest.$ac_ext ++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_compiler_boilerplate=`cat conftest.err` ++$RM conftest* + +- amigaos*) +- archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- hardcode_libdir_flag_spec_F77='-L$libdir' +- hardcode_minus_L_F77=yes +- # see comment about different semantics on the GNU ld section +- ld_shlibs_F77=no +- ;; ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_link_test_code" >conftest.$ac_ext ++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_linker_boilerplate=`cat conftest.err` ++$RM -r conftest* + +- bsdi[45]*) +- export_dynamic_flag_spec_F77=-rdynamic +- ;; + +- cygwin* | mingw* | pw32*) +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- # hardcode_libdir_flag_spec is actually meaningless, as there is +- # no search path for DLLs. +- hardcode_libdir_flag_spec_F77=' ' +- allow_undefined_flag_F77=unsupported +- # Tell ltmain to make .lib files, not .a files. +- libext=lib +- # Tell ltmain to make .dll files, not .so files. +- shrext_cmds=".dll" +- # FIXME: Setting linknames here is a bad hack. +- archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' +- # The linker will automatically build a .lib file if we build a DLL. +- old_archive_From_new_cmds_F77='true' +- # FIXME: Should let the user specify the lib program. +- old_archive_cmds_F77='lib -OUT:$oldlib$oldobjs$old_deplibs' +- fix_srcfile_path_F77='`cygpath -w "$srcfile"`' +- enable_shared_with_static_runtimes_F77=yes +- ;; ++## CAVEAT EMPTOR: ++## There is no encapsulation within the following macros, do not change ++## the running order or otherwise move them around unless you know exactly ++## what you are doing... ++if test -n "$compiler"; then ++ ++lt_prog_compiler_no_builtin_flag= ++ ++if test "$GCC" = yes; then ++ lt_prog_compiler_no_builtin_flag=' -fno-builtin' ++ ++ { echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 ++echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_rtti_exceptions=no ++ ac_outfile=conftest.$ac_objext ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="-fno-rtti -fno-exceptions" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:7622: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&5 ++ echo "$as_me:7626: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_rtti_exceptions=yes ++ fi ++ fi ++ $RM conftest* + +- darwin* | rhapsody*) +- case $host_os in +- rhapsody* | darwin1.[012]) +- allow_undefined_flag_F77='${wl}-undefined ${wl}suppress' +- ;; +- *) # Darwin 1.3 on +- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then +- allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' +- else +- case ${MACOSX_DEPLOYMENT_TARGET} in +- 10.[012]) +- allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' +- ;; +- 10.*) +- allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup' +- ;; +- esac +- fi +- ;; +- esac +- archive_cmds_need_lc_F77=no +- hardcode_direct_F77=no +- hardcode_automatic_F77=yes +- hardcode_shlibpath_var_F77=unsupported +- whole_archive_flag_spec_F77='' +- link_all_deplibs_F77=yes +- if test "$GCC" = yes ; then +- output_verbose_link_cmd='echo' +- archive_cmds_F77='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds +- archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- else +- case $cc_basename in +- xlc*) +- output_verbose_link_cmd='echo' +- archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' +- module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds +- archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- ;; +- *) +- ld_shlibs_F77=no +- ;; +- esac +- fi +- ;; ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; } + +- dgux*) +- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec_F77='-L$libdir' +- hardcode_shlibpath_var_F77=no +- ;; ++if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then ++ lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" ++else ++ : ++fi + +- freebsd1*) +- ld_shlibs_F77=no +- ;; ++fi + +- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor +- # support. Future versions do this automatically, but an explicit c++rt0.o +- # does not break anything, and helps significantly (at the cost of a little +- # extra space). +- freebsd2.2*) +- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' +- hardcode_libdir_flag_spec_F77='-R$libdir' +- hardcode_direct_F77=yes +- hardcode_shlibpath_var_F77=no +- ;; + +- # Unfortunately, older versions of FreeBSD 2 do not have this feature. +- freebsd2*) +- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct_F77=yes +- hardcode_minus_L_F77=yes +- hardcode_shlibpath_var_F77=no +- ;; + +- # FreeBSD 3 and greater uses gcc -shared to do shared libraries. +- freebsd* | dragonfly*) +- archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec_F77='-R$libdir' +- hardcode_direct_F77=yes +- hardcode_shlibpath_var_F77=no +- ;; + +- hpux9*) +- if test "$GCC" = yes; then +- archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- else +- archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- fi +- hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator_F77=: +- hardcode_direct_F77=yes + +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- hardcode_minus_L_F77=yes +- export_dynamic_flag_spec_F77='${wl}-E' +- ;; + +- hpux10*) +- if test "$GCC" = yes -a "$with_gnu_ld" = no; then +- archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' +- fi +- if test "$with_gnu_ld" = no; then +- hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator_F77=: ++ lt_prog_compiler_wl= ++lt_prog_compiler_pic= ++lt_prog_compiler_static= ++ ++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } + +- hardcode_direct_F77=yes +- export_dynamic_flag_spec_F77='${wl}-E' ++ if test "$GCC" = yes; then ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_static='-static' + +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- hardcode_minus_L_F77=yes ++ case $host_os in ++ aix*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ lt_prog_compiler_static='-Bstatic' + fi + ;; + +- hpux11*) +- if test "$GCC" = yes -a "$with_gnu_ld" = no; then +- case $host_cpu in +- hppa*64*) +- archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- ia64*) +- archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- esac +- else +- case $host_cpu in +- hppa*64*) +- archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- ia64*) +- archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- esac +- fi +- if test "$with_gnu_ld" = no; then +- hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator_F77=: ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ lt_prog_compiler_pic='-fPIC' ++ ;; ++ m68k) ++ # FIXME: we need at least 68020 code to build shared libraries, but ++ # adding the `-m68020' flag to GCC prevents building anything better, ++ # like `-m68040'. ++ lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' ++ ;; ++ esac ++ ;; + +- case $host_cpu in +- hppa*64*|ia64*) +- hardcode_libdir_flag_spec_ld_F77='+b $libdir' +- hardcode_direct_F77=no +- hardcode_shlibpath_var_F77=no +- ;; +- *) +- hardcode_direct_F77=yes +- export_dynamic_flag_spec_F77='${wl}-E' ++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ # PIC is the default for these OSes. ++ ;; + +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- hardcode_minus_L_F77=yes +- ;; +- esac +- fi ++ mingw* | cygwin* | pw32* | os2*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ # Although the cygwin gcc ignores -fPIC, still need this for old-style ++ # (--disable-auto-import) libraries ++ lt_prog_compiler_pic='-DDLL_EXPORT' + ;; + +- irix5* | irix6* | nonstopux*) +- if test "$GCC" = yes; then +- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- hardcode_libdir_flag_spec_ld_F77='-rpath $libdir' +- fi +- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator_F77=: +- link_all_deplibs_F77=yes ++ darwin* | rhapsody*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ lt_prog_compiler_pic='-fno-common' + ;; + +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out +- else +- archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF +- fi +- hardcode_libdir_flag_spec_F77='-R$libdir' +- hardcode_direct_F77=yes +- hardcode_shlibpath_var_F77=no ++ hpux*) ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ lt_prog_compiler_pic='-fPIC' ++ ;; ++ esac + ;; + +- newsos6) +- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct_F77=yes +- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator_F77=: +- hardcode_shlibpath_var_F77=no ++ interix[3-9]*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. + ;; + +- openbsd*) +- if test -f /usr/libexec/ld.so; then +- hardcode_direct_F77=yes +- hardcode_shlibpath_var_F77=no +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' +- hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' +- export_dynamic_flag_spec_F77='${wl}-E' +- else +- case $host_os in +- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) +- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec_F77='-R$libdir' +- ;; +- *) +- archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' +- ;; +- esac +- fi +- else +- ld_shlibs_F77=no +- fi ++ msdosdjgpp*) ++ # Just because we use GCC doesn't mean we suddenly get shared libraries ++ # on systems that don't support them. ++ lt_prog_compiler_can_build_shared=no ++ enable_shared=no + ;; + +- os2*) +- hardcode_libdir_flag_spec_F77='-L$libdir' +- hardcode_minus_L_F77=yes +- allow_undefined_flag_F77=unsupported +- archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' +- old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ++ *nto* | *qnx*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ lt_prog_compiler_pic='-fPIC -shared' + ;; + +- osf3*) +- if test "$GCC" = yes; then +- allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- allow_undefined_flag_F77=' -expect_unresolved \*' +- archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ lt_prog_compiler_pic=-Kconform_pic + fi +- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator_F77=: + ;; + +- osf4* | osf5*) # as osf3* with the addition of -msym flag +- if test "$GCC" = yes; then +- allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' ++ *) ++ lt_prog_compiler_pic='-fPIC' ++ ;; ++ esac ++ else ++ # PORTME Check for flag to pass linker flags through the system compiler. ++ case $host_os in ++ aix*) ++ lt_prog_compiler_wl='-Wl,' ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ lt_prog_compiler_static='-Bstatic' + else +- allow_undefined_flag_F77=' -expect_unresolved \*' +- archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ +- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' +- +- # Both c and cxx compiler support -rpath directly +- hardcode_libdir_flag_spec_F77='-rpath $libdir' ++ lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' + fi +- hardcode_libdir_separator_F77=: + ;; + +- solaris*) +- no_undefined_flag_F77=' -z text' +- if test "$GCC" = yes; then +- wlarc='${wl}' +- archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' +- else +- wlarc='' +- archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' +- archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +- fi +- hardcode_libdir_flag_spec_F77='-R$libdir' +- hardcode_shlibpath_var_F77=no +- case $host_os in +- solaris2.[0-5] | solaris2.[0-5].*) ;; ++ mingw* | cygwin* | pw32* | os2*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ lt_prog_compiler_pic='-DDLL_EXPORT' ++ ;; ++ ++ hpux9* | hpux10* | hpux11*) ++ lt_prog_compiler_wl='-Wl,' ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; + *) +- # The compiler driver will combine and reorder linker options, +- # but understands `-z linker_flag'. GCC discards it without `$wl', +- # but is careful enough not to reorder. +- # Supported since Solaris 2.6 (maybe 2.5.1?) +- if test "$GCC" = yes; then +- whole_archive_flag_spec_F77='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' +- else +- whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' +- fi ++ lt_prog_compiler_pic='+Z' + ;; + esac +- link_all_deplibs_F77=yes ++ # Is there a better lt_prog_compiler_static that works with the bundled CC? ++ lt_prog_compiler_static='${wl}-a ${wl}archive' + ;; + +- sunos4*) +- if test "x$host_vendor" = xsequent; then +- # Use $CC to link under sequent, because it throws in some extra .o +- # files that make .init and .fini sections work. +- archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' +- fi +- hardcode_libdir_flag_spec_F77='-L$libdir' +- hardcode_direct_F77=yes +- hardcode_minus_L_F77=yes +- hardcode_shlibpath_var_F77=no ++ irix5* | irix6* | nonstopux*) ++ lt_prog_compiler_wl='-Wl,' ++ # PIC (with -KPIC) is the default. ++ lt_prog_compiler_static='-non_shared' + ;; + +- sysv4) +- case $host_vendor in +- sni) +- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct_F77=yes # is this really true??? +- ;; +- siemens) +- ## LD is ld it makes a PLAMLIB +- ## CC just makes a GrossModule. +- archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags' +- reload_cmds_F77='$CC -r -o $output$reload_objs' +- hardcode_direct_F77=no ++ linux* | k*bsd*-gnu) ++ case $cc_basename in ++ icc* | ecc* | ifort*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-static' + ;; +- motorola) +- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie ++ pgcc* | pgf77* | pgf90* | pgf95*) ++ # Portland Group compilers (*not* the Pentium gcc compiler, ++ # which looks to be a dead project) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-fpic' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ccc*) ++ lt_prog_compiler_wl='-Wl,' ++ # All Alpha code is PIC. ++ lt_prog_compiler_static='-non_shared' ++ ;; ++ xl*) ++ # IBM XL C 8.0/Fortran 10.1 on PPC ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-qpic' ++ lt_prog_compiler_static='-qstaticlink' ++ ;; ++ *) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C 5.9 ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ lt_prog_compiler_wl='-Wl,' ++ ;; ++ *Sun\ F*) ++ # Sun Fortran 8.3 passes all unrecognized flags to the linker ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ lt_prog_compiler_wl='' ++ ;; ++ esac + ;; + esac +- runpath_var='LD_RUN_PATH' +- hardcode_shlibpath_var_F77=no + ;; + +- sysv4.3*) +- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var_F77=no +- export_dynamic_flag_spec_F77='-Bexport' ++ newsos6) ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' + ;; + +- sysv4*MP*) +- if test -d /usr/nec; then +- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var_F77=no +- runpath_var=LD_RUN_PATH +- hardcode_runpath_var=yes +- ld_shlibs_F77=yes +- fi ++ *nto* | *qnx*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ lt_prog_compiler_pic='-fPIC -shared' + ;; + +- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) +- no_undefined_flag_F77='${wl}-z,text' +- archive_cmds_need_lc_F77=no +- hardcode_shlibpath_var_F77=no +- runpath_var='LD_RUN_PATH' +- +- if test "$GCC" = yes; then +- archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- fi ++ osf3* | osf4* | osf5*) ++ lt_prog_compiler_wl='-Wl,' ++ # All OSF/1 code is PIC. ++ lt_prog_compiler_static='-non_shared' + ;; + +- sysv5* | sco3.2v5* | sco5v6*) +- # Note: We can NOT use -z defs as we might desire, because we do not +- # link with -lc, and that would cause any symbols used from libc to +- # always be unresolved, which means just about no library would +- # ever link correctly. If we're not using GNU ld we use -z text +- # though, which does catch some bad symbols but isn't as heavy-handed +- # as -z defs. +- no_undefined_flag_F77='${wl}-z,text' +- allow_undefined_flag_F77='${wl}-z,nodefs' +- archive_cmds_need_lc_F77=no +- hardcode_shlibpath_var_F77=no +- hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' +- hardcode_libdir_separator_F77=':' +- link_all_deplibs_F77=yes +- export_dynamic_flag_spec_F77='${wl}-Bexport' +- runpath_var='LD_RUN_PATH' +- +- if test "$GCC" = yes; then +- archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- fi ++ rdos*) ++ lt_prog_compiler_static='-non_shared' + ;; + +- uts4*) +- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec_F77='-L$libdir' +- hardcode_shlibpath_var_F77=no ++ solaris*) ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ case $cc_basename in ++ f77* | f90* | f95*) ++ lt_prog_compiler_wl='-Qoption ld ';; ++ *) ++ lt_prog_compiler_wl='-Wl,';; ++ esac + ;; + +- *) +- ld_shlibs_F77=no ++ sunos4*) ++ lt_prog_compiler_wl='-Qoption ld ' ++ lt_prog_compiler_pic='-PIC' ++ lt_prog_compiler_static='-Bstatic' + ;; +- esac +- fi +- +-{ echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5 +-echo "${ECHO_T}$ld_shlibs_F77" >&6; } +-test "$ld_shlibs_F77" = no && can_build_shared=no +- +-# +-# Do we need to explicitly link libc? +-# +-case "x$archive_cmds_need_lc_F77" in +-x|xyes) +- # Assume -lc should be added +- archive_cmds_need_lc_F77=yes + +- if test "$enable_shared" = yes && test "$GCC" = yes; then +- case $archive_cmds_F77 in +- *'~'*) +- # FIXME: we may have to deal with multi-command sequences. ++ sysv4 | sysv4.2uw2* | sysv4.3*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' + ;; +- '$CC '*) +- # Test whether the compiler implicitly links with -lc since on some +- # systems, -lgcc has to come before -lc. If gcc already passes -lc +- # to ld, don't add -lc before -lgcc. +- { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } +- $rm conftest* +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext + +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } 2>conftest.err; then +- soname=conftest +- lib=conftest +- libobjs=conftest.$ac_objext +- deplibs= +- wl=$lt_prog_compiler_wl_F77 +- pic_flag=$lt_prog_compiler_pic_F77 +- compiler_flags=-v +- linker_flags=-v +- verstring= +- output_objdir=. +- libname=conftest +- lt_save_allow_undefined_flag=$allow_undefined_flag_F77 +- allow_undefined_flag_F77= +- if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 +- (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +- then +- archive_cmds_need_lc_F77=no +- else +- archive_cmds_need_lc_F77=yes +- fi +- allow_undefined_flag_F77=$lt_save_allow_undefined_flag +- else +- cat conftest.err 1>&5 ++ sysv4*MP*) ++ if test -d /usr/nec ;then ++ lt_prog_compiler_pic='-Kconform_pic' ++ lt_prog_compiler_static='-Bstatic' + fi +- $rm conftest* +- { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5 +-echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6; } + ;; +- esac +- fi +- ;; +-esac +- +-{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } +-library_names_spec= +-libname_spec='lib$name' +-soname_spec= +-shrext_cmds=".so" +-postinstall_cmds= +-postuninstall_cmds= +-finish_cmds= +-finish_eval= +-shlibpath_var= +-shlibpath_overrides_runpath=unknown +-version_type=none +-dynamic_linker="$host_os ld.so" +-sys_lib_dlsearch_path_spec="/lib /usr/lib" +- +-need_lib_prefix=unknown +-hardcode_into_libs=no +- +-# when you set need_version to no, make sure it does not cause -set_version +-# flags to be left without arguments +-need_version=unknown +- +-case $host_os in +-aix3*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' +- shlibpath_var=LIBPATH + +- # AIX 3 has no versioning support, so we append a major version to the name. +- soname_spec='${libname}${release}${shared_ext}$major' +- ;; +- +-aix4* | aix5*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- hardcode_into_libs=yes +- if test "$host_cpu" = ia64; then +- # AIX 5 supports IA64 +- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- else +- # With GCC up to 2.95.x, collect2 would create an import file +- # for dependence libraries. The import file would start with +- # the line `#! .'. This would cause the generated library to +- # depend on `.', always an invalid library. This was fixed in +- # development snapshots of GCC prior to 3.0. +- case $host_os in +- aix4 | aix4.[01] | aix4.[01].*) +- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' +- echo ' yes ' +- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then +- : +- else +- can_build_shared=no +- fi ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' + ;; +- esac +- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct +- # soname into executable. Probably we can add versioning support to +- # collect2, so additional links can be useful in future. +- if test "$aix_use_runtimelinking" = yes; then +- # If using run time linking (on AIX 4.2 or later) use lib.so +- # instead of lib.a to let people know that these are not +- # typical AIX shared libraries. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- else +- # We preserve .a as extension for shared libraries through AIX4.2 +- # and later when we are not doing run time linking. +- library_names_spec='${libname}${release}.a $libname.a' +- soname_spec='${libname}${release}${shared_ext}$major' +- fi +- shlibpath_var=LIBPATH +- fi +- ;; +- +-amigaos*) +- library_names_spec='$libname.ixlibrary $libname.a' +- # Create ${libname}_ixlibrary.a entries in /sys/libs. +- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' +- ;; +- +-beos*) +- library_names_spec='${libname}${shared_ext}' +- dynamic_linker="$host_os ld.so" +- shlibpath_var=LIBRARY_PATH +- ;; +- +-bsdi[45]*) +- version_type=linux +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" +- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" +- # the default ld.so.conf also contains /usr/contrib/lib and +- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow +- # libtool to hard-code these into programs +- ;; +- +-cygwin* | mingw* | pw32*) +- version_type=windows +- shrext_cmds=".dll" +- need_version=no +- need_lib_prefix=no +- +- case $GCC,$host_os in +- yes,cygwin* | yes,mingw* | yes,pw32*) +- library_names_spec='$libname.dll.a' +- # DLL is installed to $(libdir)/../bin by postinstall_cmds +- postinstall_cmds='base_file=`basename \${file}`~ +- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ +- dldir=$destdir/`dirname \$dlpath`~ +- test -d \$dldir || mkdir -p \$dldir~ +- $install_prog $dir/$dlname \$dldir/$dlname~ +- chmod a+x \$dldir/$dlname' +- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ +- dlpath=$dir/\$dldll~ +- $rm \$dlpath' +- shlibpath_overrides_runpath=yes + +- case $host_os in +- cygwin*) +- # Cygwin DLLs use 'cyg' prefix rather than 'lib' +- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' +- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ++ unicos*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_can_build_shared=no + ;; +- mingw*) +- # MinGW DLLs use traditional 'lib' prefix +- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' +- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then +- # It is most probably a Windows format PATH printed by +- # mingw gcc, but we are running on Cygwin. Gcc prints its search +- # path with ; separators, and with drive letters. We can handle the +- # drive letters (cygwin fileutils understands them), so leave them, +- # especially as we might pass files found there to a mingw objdump, +- # which wouldn't understand a cygwinified path. Ahh. +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` +- else +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` +- fi ++ ++ uts4*) ++ lt_prog_compiler_pic='-pic' ++ lt_prog_compiler_static='-Bstatic' + ;; +- pw32*) +- # pw32 DLLs use 'pw' prefix rather than 'lib' +- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ ++ *) ++ lt_prog_compiler_can_build_shared=no + ;; + esac +- ;; ++ fi + ++case $host_os in ++ # For platforms which do not support PIC, -DPIC is meaningless: ++ *djgpp*) ++ lt_prog_compiler_pic= ++ ;; + *) +- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ++ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; +- esac +- dynamic_linker='Win32 ld.exe' +- # FIXME: first we should search . and the directory the executable is in +- shlibpath_var=PATH +- ;; ++esac ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic" >&6; } + +-darwin* | rhapsody*) +- dynamic_linker="$host_os dyld" +- version_type=darwin +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' +- soname_spec='${libname}${release}${major}$shared_ext' +- shlibpath_overrides_runpath=yes +- shlibpath_var=DYLD_LIBRARY_PATH +- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + +- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' +- ;; + +-dgux*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- ;; + +-freebsd1*) +- dynamic_linker=no +- ;; + +-freebsd* | dragonfly*) +- # DragonFly does not have aout. When/if they implement a new +- # versioning mechanism, adjust this. +- if test -x /usr/bin/objformat; then +- objformat=`/usr/bin/objformat` +- else +- case $host_os in +- freebsd[123]*) objformat=aout ;; +- *) objformat=elf ;; +- esac +- fi +- version_type=freebsd-$objformat +- case $version_type in +- freebsd-elf*) +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' +- need_version=no +- need_lib_prefix=no +- ;; +- freebsd-*) +- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' +- need_version=yes +- ;; +- esac +- shlibpath_var=LD_LIBRARY_PATH +- case $host_os in +- freebsd2*) +- shlibpath_overrides_runpath=yes +- ;; +- freebsd3.[01]* | freebsdelf3.[01]*) +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; +- freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ +- freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- ;; +- *) # from 4.6 on, and DragonFly +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; +- esac +- ;; + +-gnu*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- hardcode_into_libs=yes +- ;; ++# ++# Check to make sure the PIC flag actually works. ++# ++if test -n "$lt_prog_compiler_pic"; then ++ { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_pic_works+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_pic_works=no ++ ac_outfile=conftest.$ac_objext ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:7946: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&5 ++ echo "$as_me:7950: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_pic_works=yes ++ fi ++ fi ++ $RM conftest* + +-hpux9* | hpux10* | hpux11*) +- # Give a soname corresponding to the major version so that dld.sl refuses to +- # link against other versions. +- version_type=sunos +- need_lib_prefix=no +- need_version=no +- case $host_cpu in +- ia64*) +- shrext_cmds='.so' +- hardcode_into_libs=yes +- dynamic_linker="$host_os dld.so" +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- if test "X$HPUX_IA64_MODE" = X32; then +- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" +- else +- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" +- fi +- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec +- ;; +- hppa*64*) +- shrext_cmds='.sl' +- hardcode_into_libs=yes +- dynamic_linker="$host_os dld.sl" +- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH +- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" +- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec +- ;; +- *) +- shrext_cmds='.sl' +- dynamic_linker="$host_os dld.sl" +- shlibpath_var=SHLIB_PATH +- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- ;; +- esac +- # HP-UX runs *really* slowly unless shared libraries are mode 555. +- postinstall_cmds='chmod 555 $lib' +- ;; ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6; } + +-interix[3-9]*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- ;; ++if test x"$lt_cv_prog_compiler_pic_works" = xyes; then ++ case $lt_prog_compiler_pic in ++ "" | " "*) ;; ++ *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; ++ esac ++else ++ lt_prog_compiler_pic= ++ lt_prog_compiler_can_build_shared=no ++fi + +-irix5* | irix6* | nonstopux*) +- case $host_os in +- nonstopux*) version_type=nonstopux ;; +- *) +- if test "$lt_cv_prog_gnu_ld" = yes; then +- version_type=linux +- else +- version_type=irix +- fi ;; +- esac +- need_lib_prefix=no +- need_version=no +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' +- case $host_os in +- irix5* | nonstopux*) +- libsuff= shlibsuff= +- ;; +- *) +- case $LD in # libtool.m4 will add one of these switches to LD +- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") +- libsuff= shlibsuff= libmagic=32-bit;; +- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") +- libsuff=32 shlibsuff=N32 libmagic=N32;; +- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") +- libsuff=64 shlibsuff=64 libmagic=64-bit;; +- *) libsuff= shlibsuff= libmagic=never-match;; +- esac +- ;; +- esac +- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" +- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" +- hardcode_into_libs=yes +- ;; ++fi + +-# No shared lib support for Linux oldld, aout, or coff. +-linux*oldld* | linux*aout* | linux*coff*) +- dynamic_linker=no +- ;; + +-# This must be Linux ELF. +-linux* | k*bsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- # This implies no fast_install, which is unacceptable. +- # Some rework will be needed to allow for fast_install +- # before this can be enabled. +- hardcode_into_libs=yes +- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" +- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + +- # Append ld.so.conf contents to the search path +- if test -f /etc/ld.so.conf; then +- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" +- fi + +- # We used to test for /lib/ld.so.1 and disable shared libraries on +- # powerpc, because MkLinux only supported shared libraries with the +- # GNU dynamic linker. Since this was broken with cross compilers, +- # most powerpc-linux boxes support dynamic linking these days and +- # people can always --disable-shared, the test was removed, and we +- # assume the GNU/Linux dynamic linker is in use. +- dynamic_linker='GNU/Linux ld.so' +- ;; + +-netbsd*) +- version_type=sunos +- need_lib_prefix=no +- need_version=no +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- dynamic_linker='NetBSD (a.out) ld.so' +- else +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- dynamic_linker='NetBSD ld.elf_so' +- fi +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; + +-newsos6) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- ;; ++# ++# Check to make sure the static flag actually works. ++# ++wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" ++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_static_works+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_static_works=no ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS $lt_tmp_static_flag" ++ echo "$lt_simple_link_test_code" > conftest.$ac_ext ++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then ++ # The linker can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ if test -s conftest.err; then ++ # Append any errors to the config.log. ++ cat conftest.err 1>&5 ++ $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_static_works=yes ++ fi ++ else ++ lt_cv_prog_compiler_static_works=yes ++ fi ++ fi ++ $RM -r conftest* ++ LDFLAGS="$save_LDFLAGS" ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6; } ++ ++if test x"$lt_cv_prog_compiler_static_works" = xyes; then ++ : ++else ++ lt_prog_compiler_static= ++fi ++ ++ + +-nto-qnx*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- ;; + +-openbsd*) +- version_type=sunos +- sys_lib_dlsearch_path_spec="/usr/lib" +- need_lib_prefix=no +- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. +- case $host_os in +- openbsd3.3 | openbsd3.3.*) need_version=yes ;; +- *) need_version=no ;; +- esac +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- case $host_os in +- openbsd2.[89] | openbsd2.[89].*) +- shlibpath_overrides_runpath=no +- ;; +- *) +- shlibpath_overrides_runpath=yes +- ;; +- esac +- else +- shlibpath_overrides_runpath=yes +- fi +- ;; + +-os2*) +- libname_spec='$name' +- shrext_cmds=".dll" +- need_lib_prefix=no +- library_names_spec='$libname${shared_ext} $libname.a' +- dynamic_linker='OS/2 ld.exe' +- shlibpath_var=LIBPATH +- ;; + +-osf3* | osf4* | osf5*) +- version_type=osf +- need_lib_prefix=no +- need_version=no +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" +- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" +- ;; + +-rdos*) +- dynamic_linker=no +- ;; ++ { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_c_o+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_c_o=no ++ $RM -r conftest 2>/dev/null ++ mkdir conftest ++ cd conftest ++ mkdir out ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + +-solaris*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- # ldd complains unless libraries are executable +- postinstall_cmds='chmod +x $lib' +- ;; ++ lt_compiler_flag="-o out/conftest2.$ac_objext" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:8051: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>out/conftest.err) ++ ac_status=$? ++ cat out/conftest.err >&5 ++ echo "$as_me:8055: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s out/conftest2.$ac_objext ++ then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_c_o=yes ++ fi ++ fi ++ chmod u+w . 2>&5 ++ $RM conftest* ++ # SGI C++ compiler will create directory out/ii_files/ for ++ # template instantiation ++ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files ++ $RM out/* && rmdir out ++ cd .. ++ $RM -r conftest ++ $RM conftest* + +-sunos4*) +- version_type=sunos +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- if test "$with_gnu_ld" = yes; then +- need_lib_prefix=no +- fi +- need_version=yes +- ;; ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } + +-sysv4 | sysv4.3*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- case $host_vendor in +- sni) +- shlibpath_overrides_runpath=no +- need_lib_prefix=no +- export_dynamic_flag_spec='${wl}-Blargedynsym' +- runpath_var=LD_RUN_PATH +- ;; +- siemens) +- need_lib_prefix=no +- ;; +- motorola) +- need_lib_prefix=no +- need_version=no +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' +- ;; +- esac +- ;; + +-sysv4*MP*) +- if test -d /usr/nec ;then +- version_type=linux +- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' +- soname_spec='$libname${shared_ext}.$major' +- shlibpath_var=LD_LIBRARY_PATH +- fi +- ;; + +-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) +- version_type=freebsd-elf +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- hardcode_into_libs=yes +- if test "$with_gnu_ld" = yes; then +- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' +- shlibpath_overrides_runpath=no +- else +- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' +- shlibpath_overrides_runpath=yes +- case $host_os in +- sco3.2v5*) +- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" +- ;; +- esac +- fi +- sys_lib_dlsearch_path_spec='/usr/lib' +- ;; + +-uts4*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- ;; + +-*) +- dynamic_linker=no +- ;; +-esac +-{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +-echo "${ECHO_T}$dynamic_linker" >&6; } +-test "$dynamic_linker" = no && can_build_shared=no + +-variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +-if test "$GCC" = yes; then +- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" ++ { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_c_o+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_c_o=no ++ $RM -r conftest 2>/dev/null ++ mkdir conftest ++ cd conftest ++ mkdir out ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ lt_compiler_flag="-o out/conftest2.$ac_objext" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:8106: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>out/conftest.err) ++ ac_status=$? ++ cat out/conftest.err >&5 ++ echo "$as_me:8110: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s out/conftest2.$ac_objext ++ then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_c_o=yes ++ fi ++ fi ++ chmod u+w . 2>&5 ++ $RM conftest* ++ # SGI C++ compiler will create directory out/ii_files/ for ++ # template instantiation ++ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files ++ $RM out/* && rmdir out ++ cd .. ++ $RM -r conftest ++ $RM conftest* ++ + fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } ++ + +-{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } +-hardcode_action_F77= +-if test -n "$hardcode_libdir_flag_spec_F77" || \ +- test -n "$runpath_var_F77" || \ +- test "X$hardcode_automatic_F77" = "Xyes" ; then + +- # We can hardcode non-existant directories. +- if test "$hardcode_direct_F77" != no && +- # If the only mechanism to avoid hardcoding is shlibpath_var, we +- # have to relink, otherwise we might link with an installed library +- # when we should be linking with a yet-to-be-installed one +- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no && +- test "$hardcode_minus_L_F77" != no; then +- # Linking always hardcodes the temporary library directory. +- hardcode_action_F77=relink +- else +- # We can link without hardcoding, and we can hardcode nonexisting dirs. +- hardcode_action_F77=immediate ++ ++hard_links="nottested" ++if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then ++ # do not overwrite the value of need_locks provided by the user ++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } ++ hard_links=yes ++ $RM conftest* ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ touch conftest.a ++ ln conftest.a conftest.b 2>&5 || hard_links=no ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ { echo "$as_me:$LINENO: result: $hard_links" >&5 ++echo "${ECHO_T}$hard_links" >&6; } ++ if test "$hard_links" = no; then ++ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 ++echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} ++ need_locks=warn + fi + else +- # We cannot hardcode anything, or else we can only hardcode existing +- # directories. +- hardcode_action_F77=unsupported ++ need_locks=no + fi +-{ echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5 +-echo "${ECHO_T}$hardcode_action_F77" >&6; } + +-if test "$hardcode_action_F77" = relink; then +- # Fast installation is not supported +- enable_fast_install=no +-elif test "$shlibpath_overrides_runpath" = yes || +- test "$enable_shared" = no; then +- # Fast installation is not necessary +- enable_fast_install=needless +-fi + + +-# The else clause should only fire when bootstrapping the +-# libtool distribution, otherwise you forgot to ship ltmain.sh +-# with your package, and you will get complaints that there are +-# no rules to generate ltmain.sh. +-if test -f "$ltmain"; then +- # See if we are running on zsh, and set the options which allow our commands through +- # without removal of \ escapes. +- if test -n "${ZSH_VERSION+set}" ; then +- setopt NO_GLOB_SUBST +- fi +- # Now quote all the things that may contain metacharacters while being +- # careful not to overquote the AC_SUBSTed values. We take copies of the +- # variables and quote the copies for generation of the libtool script. +- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ +- SED SHELL STRIP \ +- libname_spec library_names_spec soname_spec extract_expsyms_cmds \ +- old_striplib striplib file_magic_cmd finish_cmds finish_eval \ +- deplibs_check_method reload_flag reload_cmds need_locks \ +- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ +- lt_cv_sys_global_symbol_to_c_name_address \ +- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ +- old_postinstall_cmds old_postuninstall_cmds \ +- compiler_F77 \ +- CC_F77 \ +- LD_F77 \ +- lt_prog_compiler_wl_F77 \ +- lt_prog_compiler_pic_F77 \ +- lt_prog_compiler_static_F77 \ +- lt_prog_compiler_no_builtin_flag_F77 \ +- export_dynamic_flag_spec_F77 \ +- thread_safe_flag_spec_F77 \ +- whole_archive_flag_spec_F77 \ +- enable_shared_with_static_runtimes_F77 \ +- old_archive_cmds_F77 \ +- old_archive_from_new_cmds_F77 \ +- predep_objects_F77 \ +- postdep_objects_F77 \ +- predeps_F77 \ +- postdeps_F77 \ +- compiler_lib_search_path_F77 \ +- archive_cmds_F77 \ +- archive_expsym_cmds_F77 \ +- postinstall_cmds_F77 \ +- postuninstall_cmds_F77 \ +- old_archive_from_expsyms_cmds_F77 \ +- allow_undefined_flag_F77 \ +- no_undefined_flag_F77 \ +- export_symbols_cmds_F77 \ +- hardcode_libdir_flag_spec_F77 \ +- hardcode_libdir_flag_spec_ld_F77 \ +- hardcode_libdir_separator_F77 \ +- hardcode_automatic_F77 \ +- module_cmds_F77 \ +- module_expsym_cmds_F77 \ +- lt_cv_prog_compiler_c_o_F77 \ +- fix_srcfile_path_F77 \ +- exclude_expsyms_F77 \ +- include_expsyms_F77; do +- +- case $var in +- old_archive_cmds_F77 | \ +- old_archive_from_new_cmds_F77 | \ +- archive_cmds_F77 | \ +- archive_expsym_cmds_F77 | \ +- module_cmds_F77 | \ +- module_expsym_cmds_F77 | \ +- old_archive_from_expsyms_cmds_F77 | \ +- export_symbols_cmds_F77 | \ +- extract_expsyms_cmds | reload_cmds | finish_cmds | \ +- postinstall_cmds | postuninstall_cmds | \ +- old_postinstall_cmds | old_postuninstall_cmds | \ +- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) +- # Double-quote double-evaled strings. +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" +- ;; +- *) +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" +- ;; +- esac +- done + +- case $lt_echo in +- *'\$0 --fallback-echo"') +- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` ++ ++ ++ { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } ++ ++ runpath_var= ++ allow_undefined_flag= ++ always_export_symbols=no ++ archive_cmds= ++ archive_expsym_cmds= ++ compiler_needs_object=no ++ enable_shared_with_static_runtimes=no ++ export_dynamic_flag_spec= ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ hardcode_automatic=no ++ hardcode_direct=no ++ hardcode_direct_absolute=no ++ hardcode_libdir_flag_spec= ++ hardcode_libdir_flag_spec_ld= ++ hardcode_libdir_separator= ++ hardcode_minus_L=no ++ hardcode_shlibpath_var=unsupported ++ inherit_rpath=no ++ link_all_deplibs=unknown ++ module_cmds= ++ module_expsym_cmds= ++ old_archive_from_new_cmds= ++ old_archive_from_expsyms_cmds= ++ thread_safe_flag_spec= ++ whole_archive_flag_spec= ++ # include_expsyms should be a list of space-separated symbols to be *always* ++ # included in the symbol list ++ include_expsyms= ++ # exclude_expsyms can be an extended regexp of symbols to exclude ++ # it will be wrapped by ` (' and `)$', so one must not match beginning or ++ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', ++ # as well as any symbol that contains `d'. ++ exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' ++ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out ++ # platforms (ab)use it in PIC code, but their linkers get confused if ++ # the symbol is explicitly referenced. Since portable code cannot ++ # rely on this symbol name, it's probably fine to never include it in ++ # preloaded symbol tables. ++ # Exclude shared library initialization/finalization symbols. ++ extract_expsyms_cmds= ++ ++ case $host_os in ++ cygwin* | mingw* | pw32*) ++ # FIXME: the MSVC++ port hasn't been tested in a loooong time ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ if test "$GCC" != yes; then ++ with_gnu_ld=no ++ fi ++ ;; ++ interix*) ++ # we just hope/assume this is gcc and not c89 (= MSVC++) ++ with_gnu_ld=yes ++ ;; ++ openbsd*) ++ with_gnu_ld=no + ;; + esac + +-cfgfile="$ofile" ++ ld_shlibs=yes ++ if test "$with_gnu_ld" = yes; then ++ # If archive_cmds runs LD, not CC, wlarc should be empty ++ wlarc='${wl}' + +- cat <<__EOF__ >> "$cfgfile" +-# ### BEGIN LIBTOOL TAG CONFIG: $tagname ++ # Set some defaults for GNU ld with shared library support. These ++ # are reset later if shared libraries are not supported. Putting them ++ # here allows them to be overridden if necessary. ++ runpath_var=LD_RUN_PATH ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ export_dynamic_flag_spec='${wl}--export-dynamic' ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then ++ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ whole_archive_flag_spec= ++ fi ++ supports_anon_versioning=no ++ case `$LD -v 2>&1` in ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 ++ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... ++ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... ++ *\ 2.11.*) ;; # other 2.11 versions ++ *) supports_anon_versioning=yes ;; ++ esac + +-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: ++ # See if GNU ld supports shared libraries. ++ case $host_os in ++ aix[3-9]*) ++ # On AIX/PPC, the GNU linker is very broken ++ if test "$host_cpu" != ia64; then ++ ld_shlibs=no ++ cat <<_LT_EOF 1>&2 + +-# Shell to use when invoking shell scripts. +-SHELL=$lt_SHELL ++*** Warning: the GNU linker, at least up to release 2.9.1, is reported ++*** to be unable to reliably create shared libraries on AIX. ++*** Therefore, libtool is disabling shared libraries support. If you ++*** really care for shared libraries, you may want to modify your PATH ++*** so that a non-GNU linker is found, and then restart. + +-# Whether or not to build shared libraries. +-build_libtool_libs=$enable_shared ++_LT_EOF ++ fi ++ ;; + +-# Whether or not to build static libraries. +-build_old_libs=$enable_static ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='' ++ ;; ++ m68k) ++ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_minus_L=yes ++ ;; ++ esac ++ ;; + +-# Whether or not to add -lc for building shared libraries. +-build_libtool_need_lc=$archive_cmds_need_lc_F77 ++ beos*) ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ allow_undefined_flag=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; + +-# Whether or not to disallow shared libs when runtime libs are static +-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77 ++ cygwin* | mingw* | pw32*) ++ # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, ++ # as there is no search path for DLLs. ++ hardcode_libdir_flag_spec='-L$libdir' ++ allow_undefined_flag=unsupported ++ always_export_symbols=no ++ enable_shared_with_static_runtimes=yes ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + +-# Whether or not to optimize for fast installation. +-fast_install=$enable_fast_install ++ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ # If the export-symbols file already is a .def file (1st line ++ # is EXPORTS), use it as is; otherwise, prepend... ++ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ cp $export_symbols $output_objdir/$soname.def; ++ else ++ echo EXPORTS > $output_objdir/$soname.def; ++ cat $export_symbols >> $output_objdir/$soname.def; ++ fi~ ++ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; + +-# The host system. +-host_alias=$host_alias +-host=$host +-host_os=$host_os ++ interix[3-9]*) ++ hardcode_direct=no ++ hardcode_shlibpath_var=no ++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; + +-# The build system. +-build_alias=$build_alias +-build=$build +-build_os=$build_os ++ gnu* | linux* | tpf* | k*bsd*-gnu) ++ tmp_diet=no ++ if test "$host_os" = linux-dietlibc; then ++ case $cc_basename in ++ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) ++ esac ++ fi ++ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ ++ && test "$tmp_diet" = no ++ then ++ tmp_addflag= ++ tmp_sharedflag='-shared' ++ case $cc_basename,$host_cpu in ++ pgcc*) # Portland Group C compiler ++ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag' ++ ;; ++ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers ++ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag -Mnomain' ;; ++ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 ++ tmp_addflag=' -i_dynamic' ;; ++ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 ++ tmp_addflag=' -i_dynamic -nofor_main' ;; ++ ifc* | ifort*) # Intel Fortran compiler ++ tmp_addflag=' -nofor_main' ;; ++ xl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) ++ tmp_sharedflag='-qmkshrobj' ++ tmp_addflag= ;; ++ esac ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) # Sun C 5.9 ++ whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ compiler_needs_object=yes ++ tmp_sharedflag='-G' ;; ++ *Sun\ F*) # Sun Fortran 8.3 ++ tmp_sharedflag='-G' ;; ++ esac ++ archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + +-# An echo program that does not interpret backslashes. +-echo=$lt_echo ++ if test "x$supports_anon_versioning" = xyes; then ++ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' ++ fi + +-# The archiver. +-AR=$lt_AR +-AR_FLAGS=$lt_AR_FLAGS ++ case $cc_basename in ++ xlf*) ++ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself ++ whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' ++ hardcode_libdir_flag_spec= ++ hardcode_libdir_flag_spec_ld='-rpath $libdir' ++ archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' ++ if test "x$supports_anon_versioning" = xyes; then ++ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' ++ fi ++ ;; ++ esac ++ else ++ ld_shlibs=no ++ fi ++ ;; + +-# A C compiler. +-LTCC=$lt_LTCC ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' ++ wlarc= ++ else ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ fi ++ ;; + +-# LTCC compiler flags. +-LTCFLAGS=$lt_LTCFLAGS ++ solaris*) ++ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then ++ ld_shlibs=no ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: The releases 2.8.* of the GNU linker cannot reliably ++*** create shared libraries on Solaris systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.9.1 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. ++ ++_LT_EOF ++ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; + +-# A language-specific compiler. +-CC=$lt_compiler_F77 ++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) ++ case `$LD -v 2>&1` in ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ++ ld_shlibs=no ++ cat <<_LT_EOF 1>&2 + +-# Is the compiler the GNU C compiler? +-with_gcc=$GCC_F77 ++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not ++*** reliably create shared libraries on SCO systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.16.91.0.3 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. + +-# An ERE matcher. +-EGREP=$lt_EGREP ++_LT_EOF ++ ;; ++ *) ++ # For security reasons, it is highly recommended that you always ++ # use absolute paths for naming shared libraries, and exclude the ++ # DT_RUNPATH tag from executables and libraries. But doing so ++ # requires that you compile everything twice, which is a pain. ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ esac ++ ;; + +-# The linker used to build libraries. +-LD=$lt_LD_F77 ++ sunos4*) ++ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ wlarc= ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ ;; + +-# Whether we need hard or soft links. +-LN_S=$lt_LN_S ++ *) ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ esac + +-# A BSD-compatible nm program. +-NM=$lt_NM ++ if test "$ld_shlibs" = no; then ++ runpath_var= ++ hardcode_libdir_flag_spec= ++ export_dynamic_flag_spec= ++ whole_archive_flag_spec= ++ fi ++ else ++ # PORTME fill in a description of your system's linker (not GNU ld) ++ case $host_os in ++ aix3*) ++ allow_undefined_flag=unsupported ++ always_export_symbols=yes ++ archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' ++ # Note: this linker hardcodes the directories in LIBPATH if there ++ # are no directories specified by -L. ++ hardcode_minus_L=yes ++ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then ++ # Neither direct hardcoding nor static linking is supported with a ++ # broken collect2. ++ hardcode_direct=unsupported ++ fi ++ ;; + +-# A symbol stripping program +-STRIP=$lt_STRIP ++ aix[4-9]*) ++ if test "$host_cpu" = ia64; then ++ # On IA64, the linker does run time linking by default, so we don't ++ # have to do anything special. ++ aix_use_runtimelinking=no ++ exp_sym_flag='-Bexport' ++ no_entry_flag="" ++ else ++ # If we're using GNU nm, then we don't want the "-C" option. ++ # -C means demangle to AIX nm, but means don't demangle with GNU nm ++ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then ++ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ else ++ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ fi ++ aix_use_runtimelinking=no + +-# Used to examine libraries when file_magic_cmd begins "file" +-MAGIC_CMD=$MAGIC_CMD ++ # Test if we are trying to use run time linking or normal ++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we ++ # need to do runtime linking. ++ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) ++ for ld_flag in $LDFLAGS; do ++ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then ++ aix_use_runtimelinking=yes ++ break ++ fi ++ done ++ ;; ++ esac + +-# Used on cygwin: DLL creation program. +-DLLTOOL="$DLLTOOL" ++ exp_sym_flag='-bexport' ++ no_entry_flag='-bnoentry' ++ fi + +-# Used on cygwin: object dumper. +-OBJDUMP="$OBJDUMP" ++ # When large executables or shared objects are built, AIX ld can ++ # have problems creating the table of contents. If linking a library ++ # or program results in "error TOC overflow" add -mminimal-toc to ++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not ++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + +-# Used on cygwin: assembler. +-AS="$AS" ++ archive_cmds='' ++ hardcode_direct=yes ++ hardcode_direct_absolute=yes ++ hardcode_libdir_separator=':' ++ link_all_deplibs=yes ++ file_list_spec='${wl}-f,' + +-# The name of the directory that contains temporary libtool files. +-objdir=$objdir ++ if test "$GCC" = yes; then ++ case $host_os in aix4.[012]|aix4.[012].*) ++ # We only want to do this on AIX 4.2 and lower, the check ++ # below for broken collect2 doesn't work under 4.3+ ++ collect2name=`${CC} -print-prog-name=collect2` ++ if test -f "$collect2name" && ++ strings "$collect2name" | $GREP resolve_lib_name >/dev/null ++ then ++ # We have reworked collect2 ++ : ++ else ++ # We have old collect2 ++ hardcode_direct=unsupported ++ # It fails to find uninstalled libraries when the uninstalled ++ # path is not listed in the libpath. Setting hardcode_minus_L ++ # to unsupported forces relinking ++ hardcode_minus_L=yes ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_libdir_separator= ++ fi ++ ;; ++ esac ++ shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi ++ link_all_deplibs=no ++ else ++ # not using gcc ++ if test "$host_cpu" = ia64; then ++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release ++ # chokes on -Wl,-G. The following line is correct: ++ shared_flag='-G' ++ else ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag='${wl}-G' ++ else ++ shared_flag='${wl}-bM:SRE' ++ fi ++ fi ++ fi + +-# How to create reloadable object files. +-reload_flag=$lt_reload_flag +-reload_cmds=$lt_reload_cmds ++ # It seems that -bexpall does not export symbols beginning with ++ # underscore (_), so it is better to generate a list of symbols to export. ++ always_export_symbols=yes ++ if test "$aix_use_runtimelinking" = yes; then ++ # Warning - without using the other runtime loading flags (-brtl), ++ # -berok will link without error, but may produce a broken library. ++ allow_undefined_flag='-berok' ++ # Determine the default libpath from the value encoded in an ++ # empty executable. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +-# How to pass a linker flag through the compiler. +-wl=$lt_lt_prog_compiler_wl_F77 ++int ++main () ++{ + +-# Object file suffix (normally "o"). +-objext="$ac_objext" ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + +-# Old archive suffix (normally "a"). +-libext="$libext" ++lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *\(.*\)$/\1/ ++ p ++ } ++ }' ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then ++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++fi ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-# Shared library suffix (normally ".so"). +-shrext_cmds='$shrext_cmds' + +-# Executable file suffix (normally ""). +-exeext="$exeext" ++fi + +-# Additional compiler flags for building library objects. +-pic_flag=$lt_lt_prog_compiler_pic_F77 +-pic_mode=$pic_mode ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +-# What is the maximum length of a command? +-max_cmd_len=$lt_cv_sys_max_cmd_len ++ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" ++ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ else ++ if test "$host_cpu" = ia64; then ++ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' ++ allow_undefined_flag="-z nodefs" ++ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" ++ else ++ # Determine the default libpath from the value encoded in an ++ # empty executable. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +-# Does compiler simultaneously support -c and -o options? +-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77 ++int ++main () ++{ + +-# Must we lock files when doing compilation? +-need_locks=$lt_need_locks ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + +-# Do we need the lib prefix for modules? +-need_lib_prefix=$need_lib_prefix ++lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *\(.*\)$/\1/ ++ p ++ } ++ }' ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then ++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++fi ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-# Do we need a version for libraries? +-need_version=$need_version + +-# Whether dlopen is supported. +-dlopen_support=$enable_dlopen ++fi + +-# Whether dlopen of programs is supported. +-dlopen_self=$enable_dlopen_self ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +-# Whether dlopen of statically linked programs is supported. +-dlopen_self_static=$enable_dlopen_self_static ++ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" ++ # Warning - without using the other run time loading flags, ++ # -berok will link without error, but may produce a broken library. ++ no_undefined_flag=' ${wl}-bernotok' ++ allow_undefined_flag=' ${wl}-berok' ++ # Exported symbols can be pulled into shared objects from archives ++ whole_archive_flag_spec='$convenience' ++ archive_cmds_need_lc=yes ++ # This is similar to how AIX traditionally builds its shared libraries. ++ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ fi ++ fi ++ ;; + +-# Compiler flag to prevent dynamic linking. +-link_static_flag=$lt_lt_prog_compiler_static_F77 ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='' ++ ;; ++ m68k) ++ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_minus_L=yes ++ ;; ++ esac ++ ;; + +-# Compiler flag to turn off builtin functions. +-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77 ++ bsdi[45]*) ++ export_dynamic_flag_spec=-rdynamic ++ ;; + +-# Compiler flag to allow reflexive dlopens. +-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77 ++ cygwin* | mingw* | pw32*) ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ # hardcode_libdir_flag_spec is actually meaningless, as there is ++ # no search path for DLLs. ++ hardcode_libdir_flag_spec=' ' ++ allow_undefined_flag=unsupported ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' ++ # The linker will automatically build a .lib file if we build a DLL. ++ old_archive_from_new_cmds='true' ++ # FIXME: Should let the user specify the lib program. ++ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' ++ fix_srcfile_path='`cygpath -w "$srcfile"`' ++ enable_shared_with_static_runtimes=yes ++ ;; + +-# Compiler flag to generate shared objects directly from archives. +-whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77 ++ darwin* | rhapsody*) + +-# Compiler flag to generate thread-safe objects. +-thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77 + +-# Library versioning type. +-version_type=$version_type ++ archive_cmds_need_lc=no ++ hardcode_direct=no ++ hardcode_automatic=yes ++ hardcode_shlibpath_var=unsupported ++ whole_archive_flag_spec='' ++ link_all_deplibs=yes ++ allow_undefined_flag="$_lt_dar_allow_undefined" ++ if test "$GCC" = "yes"; then ++ output_verbose_link_cmd=echo ++ archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" ++ module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" ++ archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" ++ module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + +-# Format of library name prefix. +-libname_spec=$lt_libname_spec ++ else ++ ld_shlibs=no ++ fi + +-# List of archive names. First name is the real one, the rest are links. +-# The last name is the one that the linker finds with -lNAME. +-library_names_spec=$lt_library_names_spec ++ ;; + +-# The coded name of the library, if different from the real name. +-soname_spec=$lt_soname_spec ++ dgux*) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_shlibpath_var=no ++ ;; + +-# Commands used to build and install an old-style archive. +-RANLIB=$lt_RANLIB +-old_archive_cmds=$lt_old_archive_cmds_F77 +-old_postinstall_cmds=$lt_old_postinstall_cmds +-old_postuninstall_cmds=$lt_old_postuninstall_cmds ++ freebsd1*) ++ ld_shlibs=no ++ ;; + +-# Create an old-style archive from a shared archive. +-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77 ++ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor ++ # support. Future versions do this automatically, but an explicit c++rt0.o ++ # does not break anything, and helps significantly (at the cost of a little ++ # extra space). ++ freebsd2.2*) ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ ;; + +-# Create a temporary old-style archive to link instead of a shared archive. +-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77 ++ # Unfortunately, older versions of FreeBSD 2 do not have this feature. ++ freebsd2*) ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=yes ++ hardcode_minus_L=yes ++ hardcode_shlibpath_var=no ++ ;; + +-# Commands used to build and install a shared archive. +-archive_cmds=$lt_archive_cmds_F77 +-archive_expsym_cmds=$lt_archive_expsym_cmds_F77 +-postinstall_cmds=$lt_postinstall_cmds +-postuninstall_cmds=$lt_postuninstall_cmds ++ # FreeBSD 3 and greater uses gcc -shared to do shared libraries. ++ freebsd* | dragonfly*) ++ archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ ;; + +-# Commands used to build a loadable module (assumed same as above if empty) +-module_cmds=$lt_module_cmds_F77 +-module_expsym_cmds=$lt_module_expsym_cmds_F77 ++ hpux9*) ++ if test "$GCC" = yes; then ++ archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ else ++ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ fi ++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator=: ++ hardcode_direct=yes + +-# Commands to strip libraries. +-old_striplib=$lt_old_striplib +-striplib=$lt_striplib ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L=yes ++ export_dynamic_flag_spec='${wl}-E' ++ ;; + +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predep_objects=$lt_predep_objects_F77 +- +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdep_objects=$lt_postdep_objects_F77 +- +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predeps=$lt_predeps_F77 +- +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdeps=$lt_postdeps_F77 +- +-# The library search path used internally by the compiler when linking +-# a shared library. +-compiler_lib_search_path=$lt_compiler_lib_search_path_F77 ++ hpux10*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ if test "$with_gnu_ld" = no; then ++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ++ hardcode_libdir_flag_spec_ld='+b $libdir' ++ hardcode_libdir_separator=: ++ hardcode_direct=yes ++ hardcode_direct_absolute=yes ++ export_dynamic_flag_spec='${wl}-E' ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L=yes ++ fi ++ ;; + +-# Method to check whether dependent libraries are shared objects. +-deplibs_check_method=$lt_deplibs_check_method ++ hpux11*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ else ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ fi ++ if test "$with_gnu_ld" = no; then ++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator=: + +-# Command to use when deplibs_check_method == file_magic. +-file_magic_cmd=$lt_file_magic_cmd ++ case $host_cpu in ++ hppa*64*|ia64*) ++ hardcode_direct=no ++ hardcode_shlibpath_var=no ++ ;; ++ *) ++ hardcode_direct=yes ++ hardcode_direct_absolute=yes ++ export_dynamic_flag_spec='${wl}-E' + +-# Flag that allows shared libraries with undefined symbols to be built. +-allow_undefined_flag=$lt_allow_undefined_flag_F77 ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L=yes ++ ;; ++ esac ++ fi ++ ;; + +-# Flag that forces no undefined symbols. +-no_undefined_flag=$lt_no_undefined_flag_F77 ++ irix5* | irix6* | nonstopux*) ++ if test "$GCC" = yes; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ # Try to use the -exported_symbol ld option, if it does not ++ # work, assume that -exports_file does not work either and ++ # implicitly export all symbols. ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" ++ cat >conftest.$ac_ext <<_ACEOF ++int foo(void) {} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + +-# Commands used to finish a libtool library installation in a directory. +-finish_cmds=$lt_finish_cmds ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-# Same as above, but a single script fragment to be evaled but not shown. +-finish_eval=$lt_finish_eval + +-# Take the output of nm and produce a listing of raw symbols and C names. +-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe ++fi + +-# Transform the output of nm in a proper C declaration +-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ LDFLAGS="$save_LDFLAGS" ++ else ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' ++ fi ++ archive_cmds_need_lc='no' ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator=: ++ inherit_rpath=yes ++ link_all_deplibs=yes ++ ;; + +-# Transform the output of nm in a C name address pair +-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out ++ else ++ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF ++ fi ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ ;; + +-# This is the shared library runtime path variable. +-runpath_var=$runpath_var ++ newsos6) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=yes ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator=: ++ hardcode_shlibpath_var=no ++ ;; + +-# This is the shared library path variable. +-shlibpath_var=$shlibpath_var ++ *nto* | *qnx*) ++ ;; + +-# Is shlibpath searched before the hard-coded library search path? +-shlibpath_overrides_runpath=$shlibpath_overrides_runpath ++ openbsd*) ++ if test -f /usr/libexec/ld.so; then ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ hardcode_direct_absolute=yes ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' ++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec='${wl}-E' ++ else ++ case $host_os in ++ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec='-R$libdir' ++ ;; ++ *) ++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ ;; ++ esac ++ fi ++ else ++ ld_shlibs=no ++ fi ++ ;; + +-# How to hardcode a shared library path into an executable. +-hardcode_action=$hardcode_action_F77 ++ os2*) ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_minus_L=yes ++ allow_undefined_flag=unsupported ++ archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' ++ old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ++ ;; + +-# Whether we should hardcode library paths into libraries. +-hardcode_into_libs=$hardcode_into_libs ++ osf3*) ++ if test "$GCC" = yes; then ++ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ allow_undefined_flag=' -expect_unresolved \*' ++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ fi ++ archive_cmds_need_lc='no' ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator=: ++ ;; + +-# Flag to hardcode \$libdir into a binary during linking. +-# This must work even if \$libdir does not exist. +-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77 ++ osf4* | osf5*) # as osf3* with the addition of -msym flag ++ if test "$GCC" = yes; then ++ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ else ++ allow_undefined_flag=' -expect_unresolved \*' ++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ ++ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + +-# If ld is used when linking, flag to hardcode \$libdir into +-# a binary during linking. This must work even if \$libdir does +-# not exist. +-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77 +- +-# Whether we need a single -rpath flag with a separated argument. +-hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77 +- +-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +-# resulting binary. +-hardcode_direct=$hardcode_direct_F77 +- +-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +-# resulting binary. +-hardcode_minus_L=$hardcode_minus_L_F77 +- +-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +-# the resulting binary. +-hardcode_shlibpath_var=$hardcode_shlibpath_var_F77 +- +-# Set to yes if building a shared library automatically hardcodes DIR into the library +-# and all subsequent libraries and executables linked against it. +-hardcode_automatic=$hardcode_automatic_F77 ++ # Both c and cxx compiler support -rpath directly ++ hardcode_libdir_flag_spec='-rpath $libdir' ++ fi ++ archive_cmds_need_lc='no' ++ hardcode_libdir_separator=: ++ ;; + +-# Variables whose values should be saved in libtool wrapper scripts and +-# restored at relink time. +-variables_saved_for_relink="$variables_saved_for_relink" ++ solaris*) ++ no_undefined_flag=' -z defs' ++ if test "$GCC" = yes; then ++ wlarc='${wl}' ++ archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ++ else ++ case `$CC -V 2>&1` in ++ *"Compilers 5.0"*) ++ wlarc='' ++ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ++ ;; ++ *) ++ wlarc='${wl}' ++ archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ++ ;; ++ esac ++ fi ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_shlibpath_var=no ++ case $host_os in ++ solaris2.[0-5] | solaris2.[0-5].*) ;; ++ *) ++ # The compiler driver will combine and reorder linker options, ++ # but understands `-z linker_flag'. GCC discards it without `$wl', ++ # but is careful enough not to reorder. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ if test "$GCC" = yes; then ++ whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ++ else ++ whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ++ fi ++ ;; ++ esac ++ link_all_deplibs=yes ++ ;; + +-# Whether libtool must link a program against all its dependency libraries. +-link_all_deplibs=$link_all_deplibs_F77 ++ sunos4*) ++ if test "x$host_vendor" = xsequent; then ++ # Use $CC to link under sequent, because it throws in some extra .o ++ # files that make .init and .fini sections work. ++ archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_direct=yes ++ hardcode_minus_L=yes ++ hardcode_shlibpath_var=no ++ ;; + +-# Compile-time system search path for libraries +-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec ++ sysv4) ++ case $host_vendor in ++ sni) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=yes # is this really true??? ++ ;; ++ siemens) ++ ## LD is ld it makes a PLAMLIB ++ ## CC just makes a GrossModule. ++ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' ++ reload_cmds='$CC -r -o $output$reload_objs' ++ hardcode_direct=no ++ ;; ++ motorola) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=no #Motorola manual says yes, but my tests say they lie ++ ;; ++ esac ++ runpath_var='LD_RUN_PATH' ++ hardcode_shlibpath_var=no ++ ;; + +-# Run-time system search path for libraries +-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec ++ sysv4.3*) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_shlibpath_var=no ++ export_dynamic_flag_spec='-Bexport' ++ ;; + +-# Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path=$lt_fix_srcfile_path ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_shlibpath_var=no ++ runpath_var=LD_RUN_PATH ++ hardcode_runpath_var=yes ++ ld_shlibs=yes ++ fi ++ ;; + +-# Set to yes if exported symbols are required. +-always_export_symbols=$always_export_symbols_F77 ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) ++ no_undefined_flag='${wl}-z,text' ++ archive_cmds_need_lc=no ++ hardcode_shlibpath_var=no ++ runpath_var='LD_RUN_PATH' + +-# The commands to list exported symbols. +-export_symbols_cmds=$lt_export_symbols_cmds_F77 ++ if test "$GCC" = yes; then ++ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; + +-# The commands to extract the exported symbol list from a shared archive. +-extract_expsyms_cmds=$lt_extract_expsyms_cmds ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ no_undefined_flag='${wl}-z,text' ++ allow_undefined_flag='${wl}-z,nodefs' ++ archive_cmds_need_lc=no ++ hardcode_shlibpath_var=no ++ hardcode_libdir_flag_spec='${wl}-R,$libdir' ++ hardcode_libdir_separator=':' ++ link_all_deplibs=yes ++ export_dynamic_flag_spec='${wl}-Bexport' ++ runpath_var='LD_RUN_PATH' + +-# Symbols that should not be listed in the preloaded symbols. +-exclude_expsyms=$lt_exclude_expsyms_F77 ++ if test "$GCC" = yes; then ++ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; + +-# Symbols that must always be exported. +-include_expsyms=$lt_include_expsyms_F77 ++ uts4*) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_shlibpath_var=no ++ ;; + +-# ### END LIBTOOL TAG CONFIG: $tagname ++ *) ++ ld_shlibs=no ++ ;; ++ esac + +-__EOF__ ++ if test x$host_vendor = xsni; then ++ case $host in ++ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) ++ export_dynamic_flag_spec='${wl}-Blargedynsym' ++ ;; ++ esac ++ fi ++ fi + ++{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5 ++echo "${ECHO_T}$ld_shlibs" >&6; } ++test "$ld_shlibs" = no && can_build_shared=no + +-else +- # If there is no Makefile yet, we rely on a make rule to execute +- # `config.status --recheck' to rerun these tests and create the +- # libtool script then. +- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` +- if test -f "$ltmain_in"; then +- test -f Makefile && make "$ltmain" +- fi +-fi ++with_gnu_ld=$with_gnu_ld + + +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu + +-CC="$lt_save_CC" + +- else +- tagname="" +- fi +- ;; + +- GCJ) +- if test -n "$GCJ" && test "X$GCJ" != "Xno"; then + + +-# Source file extension for Java test sources. +-ac_ext=java + +-# Object file extension for compiled Java test sources. +-objext=o +-objext_GCJ=$objext + +-# Code to be used in simple compile tests +-lt_simple_compile_test_code="class foo {}" + +-# Code to be used in simple link tests +-lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }' + +-# ltmain only uses $CC for tagged configurations so make sure $CC is set. + +-# If no C compiler was specified, use CC. +-LTCC=${LTCC-"$CC"} + +-# If no C compiler flags were specified, use CFLAGS. +-LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +-# Allow CC to be a program name with arguments. +-compiler=$CC ++ ++# ++# Do we need to explicitly link libc? ++# ++case "x$archive_cmds_need_lc" in ++x|xyes) ++ # Assume -lc should be added ++ archive_cmds_need_lc=yes ++ ++ if test "$enable_shared" = yes && test "$GCC" = yes; then ++ case $archive_cmds in ++ *'~'*) ++ # FIXME: we may have to deal with multi-command sequences. ++ ;; ++ '$CC '*) ++ # Test whether the compiler implicitly links with -lc since on some ++ # systems, -lgcc has to come before -lc. If gcc already passes -lc ++ # to ld, don't add -lc before -lgcc. ++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } ++ $RM conftest* ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } 2>conftest.err; then ++ soname=conftest ++ lib=conftest ++ libobjs=conftest.$ac_objext ++ deplibs= ++ wl=$lt_prog_compiler_wl ++ pic_flag=$lt_prog_compiler_pic ++ compiler_flags=-v ++ linker_flags=-v ++ verstring= ++ output_objdir=. ++ libname=conftest ++ lt_save_allow_undefined_flag=$allow_undefined_flag ++ allow_undefined_flag= ++ if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 ++ (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++ then ++ archive_cmds_need_lc=no ++ else ++ archive_cmds_need_lc=yes ++ fi ++ allow_undefined_flag=$lt_save_allow_undefined_flag ++ else ++ cat conftest.err 1>&5 ++ fi ++ $RM conftest* ++ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 ++echo "${ECHO_T}$archive_cmds_need_lc" >&6; } ++ ;; ++ esac ++ fi ++ ;; ++esac ++ ++ ++ ++ + + +-# save warnings/boilerplate of simple test code +-ac_outfile=conftest.$ac_objext +-echo "$lt_simple_compile_test_code" >conftest.$ac_ext +-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +-_lt_compiler_boilerplate=`cat conftest.err` +-$rm conftest* + +-ac_outfile=conftest.$ac_objext +-echo "$lt_simple_link_test_code" >conftest.$ac_ext +-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +-_lt_linker_boilerplate=`cat conftest.err` +-$rm conftest* + + +-# Allow CC to be a program name with arguments. +-lt_save_CC="$CC" +-CC=${GCJ-"gcj"} +-compiler=$CC +-compiler_GCJ=$CC +-for cc_temp in $compiler""; do +- case $cc_temp in +- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; +- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; +- \-*) ;; +- *) break;; +- esac +-done +-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + + +-# GCJ did not exist at the time GCC didn't implicitly link libc in. +-archive_cmds_need_lc_GCJ=no + +-old_archive_cmds_GCJ=$old_archive_cmds + + +-lt_prog_compiler_no_builtin_flag_GCJ= + +-if test "$GCC" = yes; then +- lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin' + + +-{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; } +-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- lt_cv_prog_compiler_rtti_exceptions=no +- ac_outfile=conftest.$ac_objext +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext +- lt_compiler_flag="-fno-rtti -fno-exceptions" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- # The option is referenced via a variable to avoid confusing sed. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ +- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:16698: $lt_compile\"" >&5) +- (eval "$lt_compile" 2>conftest.err) +- ac_status=$? +- cat conftest.err >&5 +- echo "$as_me:16702: \$? = $ac_status" >&5 +- if (exit $ac_status) && test -s "$ac_outfile"; then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings other than the usual output. +- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp +- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 +- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then +- lt_cv_prog_compiler_rtti_exceptions=yes +- fi +- fi +- $rm conftest* + +-fi +-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +-echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; } + +-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then +- lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions" +-else +- : +-fi + +-fi + +-lt_prog_compiler_wl_GCJ= +-lt_prog_compiler_pic_GCJ= +-lt_prog_compiler_static_GCJ= + +-{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } + +- if test "$GCC" = yes; then +- lt_prog_compiler_wl_GCJ='-Wl,' +- lt_prog_compiler_static_GCJ='-static' + +- case $host_os in +- aix*) +- # All AIX code is PIC. +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- lt_prog_compiler_static_GCJ='-Bstatic' +- fi +- ;; + +- amigaos*) +- # FIXME: we need at least 68020 code to build shared libraries, but +- # adding the `-m68020' flag to GCC prevents building anything better, +- # like `-m68040'. +- lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4' +- ;; + +- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) +- # PIC is the default for these OSes. +- ;; + +- mingw* | cygwin* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- # Although the cygwin gcc ignores -fPIC, still need this for old-style +- # (--disable-auto-import) libraries +- lt_prog_compiler_pic_GCJ='-DDLL_EXPORT' +- ;; + +- darwin* | rhapsody*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- lt_prog_compiler_pic_GCJ='-fno-common' +- ;; + +- interix[3-9]*) +- # Interix 3.x gcc -fpic/-fPIC options generate broken code. +- # Instead, we relocate shared libraries at runtime. +- ;; + +- msdosdjgpp*) +- # Just because we use GCC doesn't mean we suddenly get shared libraries +- # on systems that don't support them. +- lt_prog_compiler_can_build_shared_GCJ=no +- enable_shared=no +- ;; + +- sysv4*MP*) +- if test -d /usr/nec; then +- lt_prog_compiler_pic_GCJ=-Kconform_pic +- fi +- ;; + +- hpux*) +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case $host_cpu in +- hppa*64*|ia64*) +- # +Z the default +- ;; +- *) +- lt_prog_compiler_pic_GCJ='-fPIC' +- ;; +- esac +- ;; + +- *) +- lt_prog_compiler_pic_GCJ='-fPIC' +- ;; +- esac +- else +- # PORTME Check for flag to pass linker flags through the system compiler. +- case $host_os in +- aix*) +- lt_prog_compiler_wl_GCJ='-Wl,' +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- lt_prog_compiler_static_GCJ='-Bstatic' +- else +- lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp' +- fi +- ;; +- darwin*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- case $cc_basename in +- xlc*) +- lt_prog_compiler_pic_GCJ='-qnocommon' +- lt_prog_compiler_wl_GCJ='-Wl,' +- ;; +- esac +- ;; + +- mingw* | cygwin* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- lt_prog_compiler_pic_GCJ='-DDLL_EXPORT' +- ;; + +- hpux9* | hpux10* | hpux11*) +- lt_prog_compiler_wl_GCJ='-Wl,' +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case $host_cpu in +- hppa*64*|ia64*) +- # +Z the default +- ;; +- *) +- lt_prog_compiler_pic_GCJ='+Z' +- ;; +- esac +- # Is there a better lt_prog_compiler_static that works with the bundled CC? +- lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive' +- ;; + +- irix5* | irix6* | nonstopux*) +- lt_prog_compiler_wl_GCJ='-Wl,' +- # PIC (with -KPIC) is the default. +- lt_prog_compiler_static_GCJ='-non_shared' +- ;; + +- newsos6) +- lt_prog_compiler_pic_GCJ='-KPIC' +- lt_prog_compiler_static_GCJ='-Bstatic' +- ;; + +- linux* | k*bsd*-gnu) +- case $cc_basename in +- icc* | ecc*) +- lt_prog_compiler_wl_GCJ='-Wl,' +- lt_prog_compiler_pic_GCJ='-KPIC' +- lt_prog_compiler_static_GCJ='-static' +- ;; +- pgcc* | pgf77* | pgf90* | pgf95*) +- # Portland Group compilers (*not* the Pentium gcc compiler, +- # which looks to be a dead project) +- lt_prog_compiler_wl_GCJ='-Wl,' +- lt_prog_compiler_pic_GCJ='-fpic' +- lt_prog_compiler_static_GCJ='-Bstatic' +- ;; +- ccc*) +- lt_prog_compiler_wl_GCJ='-Wl,' +- # All Alpha code is PIC. +- lt_prog_compiler_static_GCJ='-non_shared' +- ;; +- *) +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) +- # Sun C 5.9 +- lt_prog_compiler_pic_GCJ='-KPIC' +- lt_prog_compiler_static_GCJ='-Bstatic' +- lt_prog_compiler_wl_GCJ='-Wl,' +- ;; +- *Sun\ F*) +- # Sun Fortran 8.3 passes all unrecognized flags to the linker +- lt_prog_compiler_pic_GCJ='-KPIC' +- lt_prog_compiler_static_GCJ='-Bstatic' +- lt_prog_compiler_wl_GCJ='' +- ;; +- esac +- ;; +- esac +- ;; + +- osf3* | osf4* | osf5*) +- lt_prog_compiler_wl_GCJ='-Wl,' +- # All OSF/1 code is PIC. +- lt_prog_compiler_static_GCJ='-non_shared' +- ;; + +- rdos*) +- lt_prog_compiler_static_GCJ='-non_shared' +- ;; + +- solaris*) +- lt_prog_compiler_pic_GCJ='-KPIC' +- lt_prog_compiler_static_GCJ='-Bstatic' +- case $cc_basename in +- f77* | f90* | f95*) +- lt_prog_compiler_wl_GCJ='-Qoption ld ';; +- *) +- lt_prog_compiler_wl_GCJ='-Wl,';; +- esac +- ;; + +- sunos4*) +- lt_prog_compiler_wl_GCJ='-Qoption ld ' +- lt_prog_compiler_pic_GCJ='-PIC' +- lt_prog_compiler_static_GCJ='-Bstatic' +- ;; + +- sysv4 | sysv4.2uw2* | sysv4.3*) +- lt_prog_compiler_wl_GCJ='-Wl,' +- lt_prog_compiler_pic_GCJ='-KPIC' +- lt_prog_compiler_static_GCJ='-Bstatic' +- ;; + +- sysv4*MP*) +- if test -d /usr/nec ;then +- lt_prog_compiler_pic_GCJ='-Kconform_pic' +- lt_prog_compiler_static_GCJ='-Bstatic' +- fi +- ;; + +- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) +- lt_prog_compiler_wl_GCJ='-Wl,' +- lt_prog_compiler_pic_GCJ='-KPIC' +- lt_prog_compiler_static_GCJ='-Bstatic' +- ;; + +- unicos*) +- lt_prog_compiler_wl_GCJ='-Wl,' +- lt_prog_compiler_can_build_shared_GCJ=no +- ;; + +- uts4*) +- lt_prog_compiler_pic_GCJ='-pic' +- lt_prog_compiler_static_GCJ='-Bstatic' +- ;; + +- *) +- lt_prog_compiler_can_build_shared_GCJ=no +- ;; +- esac +- fi + +-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6; } + +-# +-# Check to make sure the PIC flag actually works. +-# +-if test -n "$lt_prog_compiler_pic_GCJ"; then + +-{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5 +-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6; } +-if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- lt_prog_compiler_pic_works_GCJ=no +- ac_outfile=conftest.$ac_objext +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext +- lt_compiler_flag="$lt_prog_compiler_pic_GCJ" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- # The option is referenced via a variable to avoid confusing sed. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ +- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:16988: $lt_compile\"" >&5) +- (eval "$lt_compile" 2>conftest.err) +- ac_status=$? +- cat conftest.err >&5 +- echo "$as_me:16992: \$? = $ac_status" >&5 +- if (exit $ac_status) && test -s "$ac_outfile"; then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings other than the usual output. +- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp +- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 +- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then +- lt_prog_compiler_pic_works_GCJ=yes +- fi +- fi +- $rm conftest* + +-fi +-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6; } + +-if test x"$lt_prog_compiler_pic_works_GCJ" = xyes; then +- case $lt_prog_compiler_pic_GCJ in +- "" | " "*) ;; +- *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;; +- esac +-else +- lt_prog_compiler_pic_GCJ= +- lt_prog_compiler_can_build_shared_GCJ=no +-fi + +-fi +-case $host_os in +- # For platforms which do not support PIC, -DPIC is meaningless: +- *djgpp*) +- lt_prog_compiler_pic_GCJ= +- ;; +- *) +- lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ" +- ;; +-esac + +-# +-# Check to make sure the static flag actually works. +-# +-wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\" +-{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } +-if test "${lt_prog_compiler_static_works_GCJ+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- lt_prog_compiler_static_works_GCJ=no +- save_LDFLAGS="$LDFLAGS" +- LDFLAGS="$LDFLAGS $lt_tmp_static_flag" +- echo "$lt_simple_link_test_code" > conftest.$ac_ext +- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then +- # The linker can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test -s conftest.err; then +- # Append any errors to the config.log. +- cat conftest.err 1>&5 +- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp +- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 +- if diff conftest.exp conftest.er2 >/dev/null; then +- lt_prog_compiler_static_works_GCJ=yes +- fi +- else +- lt_prog_compiler_static_works_GCJ=yes +- fi +- fi +- $rm conftest* +- LDFLAGS="$save_LDFLAGS" + +-fi +-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_GCJ" >&5 +-echo "${ECHO_T}$lt_prog_compiler_static_works_GCJ" >&6; } + +-if test x"$lt_prog_compiler_static_works_GCJ" = xyes; then +- : +-else +- lt_prog_compiler_static_GCJ= +-fi + + +-{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } +-if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- lt_cv_prog_compiler_c_o_GCJ=no +- $rm -r conftest 2>/dev/null +- mkdir conftest +- cd conftest +- mkdir out +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext + +- lt_compiler_flag="-o out/conftest2.$ac_objext" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ +- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:17092: $lt_compile\"" >&5) +- (eval "$lt_compile" 2>out/conftest.err) +- ac_status=$? +- cat out/conftest.err >&5 +- echo "$as_me:17096: \$? = $ac_status" >&5 +- if (exit $ac_status) && test -s out/conftest2.$ac_objext +- then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp +- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 +- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then +- lt_cv_prog_compiler_c_o_GCJ=yes +- fi +- fi +- chmod u+w . 2>&5 +- $rm conftest* +- # SGI C++ compiler will create directory out/ii_files/ for +- # template instantiation +- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files +- $rm out/* && rmdir out +- cd .. +- rmdir conftest +- $rm conftest* + +-fi +-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5 +-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6; } + + +-hard_links="nottested" +-if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then +- # do not overwrite the value of need_locks provided by the user +- { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } +- hard_links=yes +- $rm conftest* +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- touch conftest.a +- ln conftest.a conftest.b 2>&5 || hard_links=no +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- { echo "$as_me:$LINENO: result: $hard_links" >&5 +-echo "${ECHO_T}$hard_links" >&6; } +- if test "$hard_links" = no; then +- { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} +- need_locks=warn +- fi +-else +- need_locks=no +-fi + +-{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } + +- runpath_var= +- allow_undefined_flag_GCJ= +- enable_shared_with_static_runtimes_GCJ=no +- archive_cmds_GCJ= +- archive_expsym_cmds_GCJ= +- old_archive_From_new_cmds_GCJ= +- old_archive_from_expsyms_cmds_GCJ= +- export_dynamic_flag_spec_GCJ= +- whole_archive_flag_spec_GCJ= +- thread_safe_flag_spec_GCJ= +- hardcode_libdir_flag_spec_GCJ= +- hardcode_libdir_flag_spec_ld_GCJ= +- hardcode_libdir_separator_GCJ= +- hardcode_direct_GCJ=no +- hardcode_minus_L_GCJ=no +- hardcode_shlibpath_var_GCJ=unsupported +- link_all_deplibs_GCJ=unknown +- hardcode_automatic_GCJ=no +- module_cmds_GCJ= +- module_expsym_cmds_GCJ= +- always_export_symbols_GCJ=no +- export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- # include_expsyms should be a list of space-separated symbols to be *always* +- # included in the symbol list +- include_expsyms_GCJ= +- # exclude_expsyms can be an extended regexp of symbols to exclude +- # it will be wrapped by ` (' and `)$', so one must not match beginning or +- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', +- # as well as any symbol that contains `d'. +- exclude_expsyms_GCJ="_GLOBAL_OFFSET_TABLE_" +- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out +- # platforms (ab)use it in PIC code, but their linkers get confused if +- # the symbol is explicitly referenced. Since portable code cannot +- # rely on this symbol name, it's probably fine to never include it in +- # preloaded symbol tables. +- extract_expsyms_cmds= +- # Just being paranoid about ensuring that cc_basename is set. +- for cc_temp in $compiler""; do +- case $cc_temp in +- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; +- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; +- \-*) ;; +- *) break;; +- esac +-done +-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + +- case $host_os in +- cygwin* | mingw* | pw32*) +- # FIXME: the MSVC++ port hasn't been tested in a loooong time +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- if test "$GCC" != yes; then +- with_gnu_ld=no +- fi +- ;; +- interix*) +- # we just hope/assume this is gcc and not c89 (= MSVC++) +- with_gnu_ld=yes +- ;; +- openbsd*) +- with_gnu_ld=no +- ;; +- esac + +- ld_shlibs_GCJ=yes +- if test "$with_gnu_ld" = yes; then +- # If archive_cmds runs LD, not CC, wlarc should be empty +- wlarc='${wl}' + +- # Set some defaults for GNU ld with shared library support. These +- # are reset later if shared libraries are not supported. Putting them +- # here allows them to be overridden if necessary. +- runpath_var=LD_RUN_PATH +- hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir' +- export_dynamic_flag_spec_GCJ='${wl}--export-dynamic' +- # ancient GNU ld didn't support --whole-archive et. al. +- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then +- whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- else +- whole_archive_flag_spec_GCJ= +- fi +- supports_anon_versioning=no +- case `$LD -v 2>/dev/null` in +- *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 +- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... +- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... +- *\ 2.11.*) ;; # other 2.11 versions +- *) supports_anon_versioning=yes ;; +- esac + +- # See if GNU ld supports shared libraries. +- case $host_os in +- aix3* | aix4* | aix5*) +- # On AIX/PPC, the GNU linker is very broken +- if test "$host_cpu" != ia64; then +- ld_shlibs_GCJ=no +- cat <&2 + +-*** Warning: the GNU linker, at least up to release 2.9.1, is reported +-*** to be unable to reliably create shared libraries on AIX. +-*** Therefore, libtool is disabling shared libraries support. If you +-*** really care for shared libraries, you may want to modify your PATH +-*** so that a non-GNU linker is found, and then restart. + +-EOF +- fi +- ;; + +- amigaos*) +- archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- hardcode_libdir_flag_spec_GCJ='-L$libdir' +- hardcode_minus_L_GCJ=yes +- +- # Samuel A. Falvo II reports +- # that the semantics of dynamic libraries on AmigaOS, at least up +- # to version 4, is to share data among multiple programs linked +- # with the same dynamic library. Since this doesn't match the +- # behavior of shared libraries on other platforms, we can't use +- # them. +- ld_shlibs_GCJ=no +- ;; + +- beos*) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- allow_undefined_flag_GCJ=unsupported +- # Joseph Beckenbach says some releases of gcc +- # support --undefined. This deserves some investigation. FIXME +- archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- else +- ld_shlibs_GCJ=no +- fi +- ;; + +- cygwin* | mingw* | pw32*) +- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless, +- # as there is no search path for DLLs. +- hardcode_libdir_flag_spec_GCJ='-L$libdir' +- allow_undefined_flag_GCJ=unsupported +- always_export_symbols_GCJ=no +- enable_shared_with_static_runtimes_GCJ=yes +- export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + +- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then +- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- # If the export-symbols file already is a .def file (1st line +- # is EXPORTS), use it as is; otherwise, prepend... +- archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +- cp $export_symbols $output_objdir/$soname.def; +- else +- echo EXPORTS > $output_objdir/$soname.def; +- cat $export_symbols >> $output_objdir/$soname.def; +- fi~ +- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- else +- ld_shlibs_GCJ=no +- fi +- ;; + +- interix[3-9]*) +- hardcode_direct_GCJ=no +- hardcode_shlibpath_var_GCJ=no +- hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' +- export_dynamic_flag_spec_GCJ='${wl}-E' +- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. +- # Instead, shared libraries are loaded at an image base (0x10000000 by +- # default) and relocated if they conflict, which is a slow very memory +- # consuming and fragmenting process. To avoid this, we pick a random, +- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link +- # time. Moving up from 0x10000000 also allows more sbrk(2) space. +- archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' +- archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' +- ;; + +- gnu* | linux* | k*bsd*-gnu) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- tmp_addflag= +- case $cc_basename,$host_cpu in +- pgcc*) # Portland Group C compiler +- whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- tmp_addflag=' $pic_flag' +- ;; +- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers +- whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- tmp_addflag=' $pic_flag -Mnomain' ;; +- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 +- tmp_addflag=' -i_dynamic' ;; +- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 +- tmp_addflag=' -i_dynamic -nofor_main' ;; +- ifc* | ifort*) # Intel Fortran compiler +- tmp_addflag=' -nofor_main' ;; +- esac +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) # Sun C 5.9 +- whole_archive_flag_spec_GCJ='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- tmp_sharedflag='-G' ;; +- *Sun\ F*) # Sun Fortran 8.3 +- tmp_sharedflag='-G' ;; +- *) +- tmp_sharedflag='-shared' ;; +- esac +- archive_cmds_GCJ='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + +- if test $supports_anon_versioning = yes; then +- archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~ +- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ +- $echo "local: *; };" >> $output_objdir/$libname.ver~ +- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' +- fi +- else +- ld_shlibs_GCJ=no +- fi +- ;; + +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' +- wlarc= +- else +- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- fi +- ;; + +- solaris*) +- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then +- ld_shlibs_GCJ=no +- cat <&2 + +-*** Warning: The releases 2.8.* of the GNU linker cannot reliably +-*** create shared libraries on Solaris systems. Therefore, libtool +-*** is disabling shared libraries support. We urge you to upgrade GNU +-*** binutils to release 2.9.1 or newer. Another option is to modify +-*** your PATH or compiler configuration so that the native linker is +-*** used, and then restart. + +-EOF +- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- ld_shlibs_GCJ=no +- fi +- ;; + +- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) +- case `$LD -v 2>&1` in +- *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) +- ld_shlibs_GCJ=no +- cat <<_LT_EOF 1>&2 + +-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +-*** reliably create shared libraries on SCO systems. Therefore, libtool +-*** is disabling shared libraries support. We urge you to upgrade GNU +-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +-*** your PATH or compiler configuration so that the native linker is +-*** used, and then restart. + +-_LT_EOF +- ;; +- *) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' +- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' +- archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' +- else +- ld_shlibs_GCJ=no +- fi +- ;; +- esac +- ;; + +- sunos4*) +- archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- wlarc= +- hardcode_direct_GCJ=yes +- hardcode_shlibpath_var_GCJ=no +- ;; + +- *) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- ld_shlibs_GCJ=no +- fi +- ;; +- esac + +- if test "$ld_shlibs_GCJ" = no; then +- runpath_var= +- hardcode_libdir_flag_spec_GCJ= +- export_dynamic_flag_spec_GCJ= +- whole_archive_flag_spec_GCJ= +- fi +- else +- # PORTME fill in a description of your system's linker (not GNU ld) +- case $host_os in +- aix3*) +- allow_undefined_flag_GCJ=unsupported +- always_export_symbols_GCJ=yes +- archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' +- # Note: this linker hardcodes the directories in LIBPATH if there +- # are no directories specified by -L. +- hardcode_minus_L_GCJ=yes +- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then +- # Neither direct hardcoding nor static linking is supported with a +- # broken collect2. +- hardcode_direct_GCJ=unsupported +- fi +- ;; + +- aix4* | aix5*) +- if test "$host_cpu" = ia64; then +- # On IA64, the linker does run time linking by default, so we don't +- # have to do anything special. +- aix_use_runtimelinking=no +- exp_sym_flag='-Bexport' +- no_entry_flag="" +- else +- # If we're using GNU nm, then we don't want the "-C" option. +- # -C means demangle to AIX nm, but means don't demangle with GNU nm +- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then +- export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' +- else +- export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' +- fi +- aix_use_runtimelinking=no + +- # Test if we are trying to use run time linking or normal +- # AIX style linking. If -brtl is somewhere in LDFLAGS, we +- # need to do runtime linking. +- case $host_os in aix4.[23]|aix4.[23].*|aix5*) +- for ld_flag in $LDFLAGS; do +- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then +- aix_use_runtimelinking=yes +- break +- fi +- done +- ;; +- esac + +- exp_sym_flag='-bexport' +- no_entry_flag='-bnoentry' +- fi + +- # When large executables or shared objects are built, AIX ld can +- # have problems creating the table of contents. If linking a library +- # or program results in "error TOC overflow" add -mminimal-toc to +- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not +- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + +- archive_cmds_GCJ='' +- hardcode_direct_GCJ=yes +- hardcode_libdir_separator_GCJ=':' +- link_all_deplibs_GCJ=yes + +- if test "$GCC" = yes; then +- case $host_os in aix4.[012]|aix4.[012].*) +- # We only want to do this on AIX 4.2 and lower, the check +- # below for broken collect2 doesn't work under 4.3+ +- collect2name=`${CC} -print-prog-name=collect2` +- if test -f "$collect2name" && \ +- strings "$collect2name" | grep resolve_lib_name >/dev/null +- then +- # We have reworked collect2 +- : +- else +- # We have old collect2 +- hardcode_direct_GCJ=unsupported +- # It fails to find uninstalled libraries when the uninstalled +- # path is not listed in the libpath. Setting hardcode_minus_L +- # to unsupported forces relinking +- hardcode_minus_L_GCJ=yes +- hardcode_libdir_flag_spec_GCJ='-L$libdir' +- hardcode_libdir_separator_GCJ= +- fi +- ;; +- esac +- shared_flag='-shared' +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag="$shared_flag "'${wl}-G' +- fi +- else +- # not using gcc +- if test "$host_cpu" = ia64; then +- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release +- # chokes on -Wl,-G. The following line is correct: +- shared_flag='-G' +- else +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag='${wl}-G' +- else +- shared_flag='${wl}-bM:SRE' +- fi +- fi +- fi + +- # It seems that -bexpall does not export symbols beginning with +- # underscore (_), so it is better to generate a list of symbols to export. +- always_export_symbols_GCJ=yes +- if test "$aix_use_runtimelinking" = yes; then +- # Warning - without using the other runtime loading flags (-brtl), +- # -berok will link without error, but may produce a broken library. +- allow_undefined_flag_GCJ='-berok' +- # Determine the default libpath from the value encoded in an empty executable. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-int +-main () +-{ + +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then + +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *\(.*\)$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + + +-fi + +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +- hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" +- archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" +- else +- if test "$host_cpu" = ia64; then +- hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib' +- allow_undefined_flag_GCJ="-z nodefs" +- archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" +- else +- # Determine the default libpath from the value encoded in an empty executable. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-int +-main () +-{ + +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then + +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *\(.*\)$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + + +-fi + +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +- hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" +- # Warning - without using the other run time loading flags, +- # -berok will link without error, but may produce a broken library. +- no_undefined_flag_GCJ=' ${wl}-bernotok' +- allow_undefined_flag_GCJ=' ${wl}-berok' +- # Exported symbols can be pulled into shared objects from archives +- whole_archive_flag_spec_GCJ='$convenience' +- archive_cmds_need_lc_GCJ=yes +- # This is similar to how AIX traditionally builds its shared libraries. +- archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' +- fi +- fi +- ;; + +- amigaos*) +- archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- hardcode_libdir_flag_spec_GCJ='-L$libdir' +- hardcode_minus_L_GCJ=yes +- # see comment about different semantics on the GNU ld section +- ld_shlibs_GCJ=no +- ;; + +- bsdi[45]*) +- export_dynamic_flag_spec_GCJ=-rdynamic +- ;; + +- cygwin* | mingw* | pw32*) +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- # hardcode_libdir_flag_spec is actually meaningless, as there is +- # no search path for DLLs. +- hardcode_libdir_flag_spec_GCJ=' ' +- allow_undefined_flag_GCJ=unsupported +- # Tell ltmain to make .lib files, not .a files. +- libext=lib +- # Tell ltmain to make .dll files, not .so files. +- shrext_cmds=".dll" +- # FIXME: Setting linknames here is a bad hack. +- archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' +- # The linker will automatically build a .lib file if we build a DLL. +- old_archive_From_new_cmds_GCJ='true' +- # FIXME: Should let the user specify the lib program. +- old_archive_cmds_GCJ='lib -OUT:$oldlib$oldobjs$old_deplibs' +- fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`' +- enable_shared_with_static_runtimes_GCJ=yes +- ;; + +- darwin* | rhapsody*) +- case $host_os in +- rhapsody* | darwin1.[012]) +- allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress' +- ;; +- *) # Darwin 1.3 on +- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then +- allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' +- else +- case ${MACOSX_DEPLOYMENT_TARGET} in +- 10.[012]) +- allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' +- ;; +- 10.*) +- allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup' +- ;; +- esac +- fi +- ;; +- esac +- archive_cmds_need_lc_GCJ=no +- hardcode_direct_GCJ=no +- hardcode_automatic_GCJ=yes +- hardcode_shlibpath_var_GCJ=unsupported +- whole_archive_flag_spec_GCJ='' +- link_all_deplibs_GCJ=yes +- if test "$GCC" = yes ; then +- output_verbose_link_cmd='echo' +- archive_cmds_GCJ='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds +- archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- else +- case $cc_basename in +- xlc*) +- output_verbose_link_cmd='echo' +- archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' +- module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds +- archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- ;; +- *) +- ld_shlibs_GCJ=no +- ;; +- esac +- fi +- ;; + +- dgux*) +- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec_GCJ='-L$libdir' +- hardcode_shlibpath_var_GCJ=no +- ;; + +- freebsd1*) +- ld_shlibs_GCJ=no +- ;; + +- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor +- # support. Future versions do this automatically, but an explicit c++rt0.o +- # does not break anything, and helps significantly (at the cost of a little +- # extra space). +- freebsd2.2*) +- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' +- hardcode_libdir_flag_spec_GCJ='-R$libdir' +- hardcode_direct_GCJ=yes +- hardcode_shlibpath_var_GCJ=no +- ;; + +- # Unfortunately, older versions of FreeBSD 2 do not have this feature. +- freebsd2*) +- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct_GCJ=yes +- hardcode_minus_L_GCJ=yes +- hardcode_shlibpath_var_GCJ=no +- ;; + +- # FreeBSD 3 and greater uses gcc -shared to do shared libraries. +- freebsd* | dragonfly*) +- archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec_GCJ='-R$libdir' +- hardcode_direct_GCJ=yes +- hardcode_shlibpath_var_GCJ=no +- ;; + +- hpux9*) +- if test "$GCC" = yes; then +- archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- else +- archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- fi +- hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator_GCJ=: +- hardcode_direct_GCJ=yes + +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- hardcode_minus_L_GCJ=yes +- export_dynamic_flag_spec_GCJ='${wl}-E' +- ;; + +- hpux10*) +- if test "$GCC" = yes -a "$with_gnu_ld" = no; then +- archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' +- fi +- if test "$with_gnu_ld" = no; then +- hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator_GCJ=: + +- hardcode_direct_GCJ=yes +- export_dynamic_flag_spec_GCJ='${wl}-E' + +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- hardcode_minus_L_GCJ=yes +- fi +- ;; + +- hpux11*) +- if test "$GCC" = yes -a "$with_gnu_ld" = no; then +- case $host_cpu in +- hppa*64*) +- archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- ia64*) +- archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- esac +- else +- case $host_cpu in +- hppa*64*) +- archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- ia64*) +- archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- esac +- fi +- if test "$with_gnu_ld" = no; then +- hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator_GCJ=: + +- case $host_cpu in +- hppa*64*|ia64*) +- hardcode_libdir_flag_spec_ld_GCJ='+b $libdir' +- hardcode_direct_GCJ=no +- hardcode_shlibpath_var_GCJ=no +- ;; +- *) +- hardcode_direct_GCJ=yes +- export_dynamic_flag_spec_GCJ='${wl}-E' + +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- hardcode_minus_L_GCJ=yes +- ;; +- esac +- fi +- ;; + +- irix5* | irix6* | nonstopux*) +- if test "$GCC" = yes; then +- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir' +- fi +- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator_GCJ=: +- link_all_deplibs_GCJ=yes +- ;; + +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out +- else +- archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF +- fi +- hardcode_libdir_flag_spec_GCJ='-R$libdir' +- hardcode_direct_GCJ=yes +- hardcode_shlibpath_var_GCJ=no +- ;; + +- newsos6) +- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct_GCJ=yes +- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator_GCJ=: +- hardcode_shlibpath_var_GCJ=no +- ;; + +- openbsd*) +- if test -f /usr/libexec/ld.so; then +- hardcode_direct_GCJ=yes +- hardcode_shlibpath_var_GCJ=no +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' +- hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' +- export_dynamic_flag_spec_GCJ='${wl}-E' +- else +- case $host_os in +- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) +- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec_GCJ='-R$libdir' +- ;; +- *) +- archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' +- ;; +- esac +- fi +- else +- ld_shlibs_GCJ=no +- fi +- ;; + +- os2*) +- hardcode_libdir_flag_spec_GCJ='-L$libdir' +- hardcode_minus_L_GCJ=yes +- allow_undefined_flag_GCJ=unsupported +- archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' +- old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' +- ;; + +- osf3*) +- if test "$GCC" = yes; then +- allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- allow_undefined_flag_GCJ=' -expect_unresolved \*' +- archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- fi +- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator_GCJ=: +- ;; + +- osf4* | osf5*) # as osf3* with the addition of -msym flag +- if test "$GCC" = yes; then +- allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' +- else +- allow_undefined_flag_GCJ=' -expect_unresolved \*' +- archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ +- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' + +- # Both c and cxx compiler support -rpath directly +- hardcode_libdir_flag_spec_GCJ='-rpath $libdir' +- fi +- hardcode_libdir_separator_GCJ=: +- ;; + +- solaris*) +- no_undefined_flag_GCJ=' -z text' +- if test "$GCC" = yes; then +- wlarc='${wl}' +- archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' +- else +- wlarc='' +- archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' +- archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +- fi +- hardcode_libdir_flag_spec_GCJ='-R$libdir' +- hardcode_shlibpath_var_GCJ=no +- case $host_os in +- solaris2.[0-5] | solaris2.[0-5].*) ;; +- *) +- # The compiler driver will combine and reorder linker options, +- # but understands `-z linker_flag'. GCC discards it without `$wl', +- # but is careful enough not to reorder. +- # Supported since Solaris 2.6 (maybe 2.5.1?) +- if test "$GCC" = yes; then +- whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' +- else +- whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' +- fi +- ;; +- esac +- link_all_deplibs_GCJ=yes +- ;; + +- sunos4*) +- if test "x$host_vendor" = xsequent; then +- # Use $CC to link under sequent, because it throws in some extra .o +- # files that make .init and .fini sections work. +- archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' +- fi +- hardcode_libdir_flag_spec_GCJ='-L$libdir' +- hardcode_direct_GCJ=yes +- hardcode_minus_L_GCJ=yes +- hardcode_shlibpath_var_GCJ=no +- ;; + +- sysv4) +- case $host_vendor in +- sni) +- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct_GCJ=yes # is this really true??? +- ;; +- siemens) +- ## LD is ld it makes a PLAMLIB +- ## CC just makes a GrossModule. +- archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags' +- reload_cmds_GCJ='$CC -r -o $output$reload_objs' +- hardcode_direct_GCJ=no +- ;; +- motorola) +- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie +- ;; +- esac +- runpath_var='LD_RUN_PATH' +- hardcode_shlibpath_var_GCJ=no +- ;; + +- sysv4.3*) +- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var_GCJ=no +- export_dynamic_flag_spec_GCJ='-Bexport' +- ;; + +- sysv4*MP*) +- if test -d /usr/nec; then +- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var_GCJ=no +- runpath_var=LD_RUN_PATH +- hardcode_runpath_var=yes +- ld_shlibs_GCJ=yes +- fi +- ;; + +- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) +- no_undefined_flag_GCJ='${wl}-z,text' +- archive_cmds_need_lc_GCJ=no +- hardcode_shlibpath_var_GCJ=no +- runpath_var='LD_RUN_PATH' + +- if test "$GCC" = yes; then +- archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- fi +- ;; + +- sysv5* | sco3.2v5* | sco5v6*) +- # Note: We can NOT use -z defs as we might desire, because we do not +- # link with -lc, and that would cause any symbols used from libc to +- # always be unresolved, which means just about no library would +- # ever link correctly. If we're not using GNU ld we use -z text +- # though, which does catch some bad symbols but isn't as heavy-handed +- # as -z defs. +- no_undefined_flag_GCJ='${wl}-z,text' +- allow_undefined_flag_GCJ='${wl}-z,nodefs' +- archive_cmds_need_lc_GCJ=no +- hardcode_shlibpath_var_GCJ=no +- hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' +- hardcode_libdir_separator_GCJ=':' +- link_all_deplibs_GCJ=yes +- export_dynamic_flag_spec_GCJ='${wl}-Bexport' +- runpath_var='LD_RUN_PATH' + +- if test "$GCC" = yes; then +- archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- fi +- ;; + +- uts4*) +- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec_GCJ='-L$libdir' +- hardcode_shlibpath_var_GCJ=no +- ;; + +- *) +- ld_shlibs_GCJ=no +- ;; +- esac +- fi + +-{ echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5 +-echo "${ECHO_T}$ld_shlibs_GCJ" >&6; } +-test "$ld_shlibs_GCJ" = no && can_build_shared=no + +-# +-# Do we need to explicitly link libc? +-# +-case "x$archive_cmds_need_lc_GCJ" in +-x|xyes) +- # Assume -lc should be added +- archive_cmds_need_lc_GCJ=yes + +- if test "$enable_shared" = yes && test "$GCC" = yes; then +- case $archive_cmds_GCJ in +- *'~'*) +- # FIXME: we may have to deal with multi-command sequences. +- ;; +- '$CC '*) +- # Test whether the compiler implicitly links with -lc since on some +- # systems, -lgcc has to come before -lc. If gcc already passes -lc +- # to ld, don't add -lc before -lgcc. +- { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } +- $rm conftest* +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext + +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } 2>conftest.err; then +- soname=conftest +- lib=conftest +- libobjs=conftest.$ac_objext +- deplibs= +- wl=$lt_prog_compiler_wl_GCJ +- pic_flag=$lt_prog_compiler_pic_GCJ +- compiler_flags=-v +- linker_flags=-v +- verstring= +- output_objdir=. +- libname=conftest +- lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ +- allow_undefined_flag_GCJ= +- if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 +- (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +- then +- archive_cmds_need_lc_GCJ=no +- else +- archive_cmds_need_lc_GCJ=yes +- fi +- allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag +- else +- cat conftest.err 1>&5 +- fi +- $rm conftest* +- { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5 +-echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6; } +- ;; +- esac +- fi +- ;; +-esac + +-{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 ++ ++ ++ ++ ++ ++ ++ ++ { echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 + echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } ++ ++if test "$GCC" = yes; then ++ case $host_os in ++ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; ++ *) lt_awk_arg="/^libraries:/" ;; ++ esac ++ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then ++ # if the path contains ";" then we assume it to be the separator ++ # otherwise default to the standard path separator (i.e. ":") - it is ++ # assumed that no part of a normal pathname contains ";" but that should ++ # okay in the real world where ";" in dirpaths is itself problematic. ++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ # Ok, now we have the path, separated by spaces, we can step through it ++ # and add multilib dir if necessary. ++ lt_tmp_lt_search_path_spec= ++ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` ++ for lt_sys_path in $lt_search_path_spec; do ++ if test -d "$lt_sys_path/$lt_multi_os_dir"; then ++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" ++ else ++ test -d "$lt_sys_path" && \ ++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" ++ fi ++ done ++ lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' ++BEGIN {RS=" "; FS="/|\n";} { ++ lt_foo=""; ++ lt_count=0; ++ for (lt_i = NF; lt_i > 0; lt_i--) { ++ if ($lt_i != "" && $lt_i != ".") { ++ if ($lt_i == "..") { ++ lt_count++; ++ } else { ++ if (lt_count == 0) { ++ lt_foo="/" $lt_i lt_foo; ++ } else { ++ lt_count--; ++ } ++ } ++ } ++ } ++ if (lt_foo != "") { lt_freq[lt_foo]++; } ++ if (lt_freq[lt_foo] == 1) { print lt_foo; } ++}'` ++ sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` ++else ++ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" ++fi + library_names_spec= + libname_spec='lib$name' + soname_spec= +@@ -18203,7 +9523,6 @@ + version_type=none + dynamic_linker="$host_os ld.so" + sys_lib_dlsearch_path_spec="/lib /usr/lib" +- + need_lib_prefix=unknown + hardcode_into_libs=no + +@@ -18221,7 +9540,7 @@ + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +-aix4* | aix5*) ++aix[4-9]*) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -18240,7 +9559,7 @@ + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' +- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then ++ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no +@@ -18266,9 +9585,18 @@ + ;; + + amigaos*) +- library_names_spec='$libname.ixlibrary $libname.a' +- # Create ${libname}_ixlibrary.a entries in /sys/libs. +- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ++ case $host_cpu in ++ powerpc) ++ # Since July 2007 AmigaOS4 officially supports .so libraries. ++ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ ;; ++ m68k) ++ library_names_spec='$libname.ixlibrary $libname.a' ++ # Create ${libname}_ixlibrary.a entries in /sys/libs. ++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ++ ;; ++ esac + ;; + + beos*) +@@ -18302,14 +9630,17 @@ + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ +- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ +- chmod a+x \$dldir/$dlname' ++ chmod a+x \$dldir/$dlname~ ++ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then ++ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; ++ fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ +- $rm \$dlpath' ++ $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in +@@ -18321,17 +9652,17 @@ + mingw*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' +- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then ++ sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) +@@ -18355,12 +9686,13 @@ + version_type=darwin + need_lib_prefix=no + need_version=no +- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' ++ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +@@ -18453,18 +9785,18 @@ + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; +- hppa*64*) +- shrext_cmds='.sl' +- hardcode_into_libs=yes +- dynamic_linker="$host_os dld.sl" +- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH +- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" +- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec +- ;; +- *) ++ hppa*64*) ++ shrext_cmds='.sl' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH +@@ -18541,17 +9873,69 @@ + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no ++ # Some binutils ld are patched to set DT_RUNPATH ++ save_LDFLAGS=$LDFLAGS ++ save_libdir=$libdir ++ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ ++ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then ++ shlibpath_overrides_runpath=yes ++fi ++ ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ LDFLAGS=$save_LDFLAGS ++ libdir=$save_libdir ++ + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes +- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" +- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then +- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on +@@ -18563,11 +9947,23 @@ + dynamic_linker='GNU/Linux ld.so' + ;; + ++netbsdelf*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='NetBSD ld.elf_so' ++ ;; ++ + netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' +@@ -18588,14 +9984,16 @@ + shlibpath_overrides_runpath=yes + ;; + +-nto-qnx*) +- version_type=linux ++*nto* | *qnx*) ++ version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='ldqnx.so' + ;; + + openbsd*) +@@ -18604,13 +10002,13 @@ + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in +- openbsd3.3 | openbsd3.3.*) need_version=yes ;; +- *) need_version=no ;; ++ openbsd3.3 | openbsd3.3.*) need_version=yes ;; ++ *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no +@@ -18682,7 +10080,6 @@ + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no +- export_dynamic_flag_spec='${wl}-Blargedynsym' + runpath_var=LD_RUN_PATH + ;; + siemens) +@@ -18713,13 +10110,12 @@ + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' +- shlibpath_overrides_runpath=no + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' +- shlibpath_overrides_runpath=yes + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" +@@ -18729,6 +10125,17 @@ + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + ++tpf*) ++ # TPF is a cross-target only. Preferred cross-host = GNU/Linux. ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_name_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ + uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +@@ -18749,981 +10156,1024 @@ + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" + fi + +-{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } +-hardcode_action_GCJ= +-if test -n "$hardcode_libdir_flag_spec_GCJ" || \ +- test -n "$runpath_var_GCJ" || \ +- test "X$hardcode_automatic_GCJ" = "Xyes" ; then +- +- # We can hardcode non-existant directories. +- if test "$hardcode_direct_GCJ" != no && +- # If the only mechanism to avoid hardcoding is shlibpath_var, we +- # have to relink, otherwise we might link with an installed library +- # when we should be linking with a yet-to-be-installed one +- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no && +- test "$hardcode_minus_L_GCJ" != no; then +- # Linking always hardcodes the temporary library directory. +- hardcode_action_GCJ=relink +- else +- # We can link without hardcoding, and we can hardcode nonexisting dirs. +- hardcode_action_GCJ=immediate +- fi +-else +- # We cannot hardcode anything, or else we can only hardcode existing +- # directories. +- hardcode_action_GCJ=unsupported ++if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then ++ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" + fi +-{ echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5 +-echo "${ECHO_T}$hardcode_action_GCJ" >&6; } +- +-if test "$hardcode_action_GCJ" = relink; then +- # Fast installation is not supported +- enable_fast_install=no +-elif test "$shlibpath_overrides_runpath" = yes || +- test "$enable_shared" = no; then +- # Fast installation is not necessary +- enable_fast_install=needless ++if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then ++ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" + fi + + +-# The else clause should only fire when bootstrapping the +-# libtool distribution, otherwise you forgot to ship ltmain.sh +-# with your package, and you will get complaints that there are +-# no rules to generate ltmain.sh. +-if test -f "$ltmain"; then +- # See if we are running on zsh, and set the options which allow our commands through +- # without removal of \ escapes. +- if test -n "${ZSH_VERSION+set}" ; then +- setopt NO_GLOB_SUBST +- fi +- # Now quote all the things that may contain metacharacters while being +- # careful not to overquote the AC_SUBSTed values. We take copies of the +- # variables and quote the copies for generation of the libtool script. +- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ +- SED SHELL STRIP \ +- libname_spec library_names_spec soname_spec extract_expsyms_cmds \ +- old_striplib striplib file_magic_cmd finish_cmds finish_eval \ +- deplibs_check_method reload_flag reload_cmds need_locks \ +- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ +- lt_cv_sys_global_symbol_to_c_name_address \ +- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ +- old_postinstall_cmds old_postuninstall_cmds \ +- compiler_GCJ \ +- CC_GCJ \ +- LD_GCJ \ +- lt_prog_compiler_wl_GCJ \ +- lt_prog_compiler_pic_GCJ \ +- lt_prog_compiler_static_GCJ \ +- lt_prog_compiler_no_builtin_flag_GCJ \ +- export_dynamic_flag_spec_GCJ \ +- thread_safe_flag_spec_GCJ \ +- whole_archive_flag_spec_GCJ \ +- enable_shared_with_static_runtimes_GCJ \ +- old_archive_cmds_GCJ \ +- old_archive_from_new_cmds_GCJ \ +- predep_objects_GCJ \ +- postdep_objects_GCJ \ +- predeps_GCJ \ +- postdeps_GCJ \ +- compiler_lib_search_path_GCJ \ +- archive_cmds_GCJ \ +- archive_expsym_cmds_GCJ \ +- postinstall_cmds_GCJ \ +- postuninstall_cmds_GCJ \ +- old_archive_from_expsyms_cmds_GCJ \ +- allow_undefined_flag_GCJ \ +- no_undefined_flag_GCJ \ +- export_symbols_cmds_GCJ \ +- hardcode_libdir_flag_spec_GCJ \ +- hardcode_libdir_flag_spec_ld_GCJ \ +- hardcode_libdir_separator_GCJ \ +- hardcode_automatic_GCJ \ +- module_cmds_GCJ \ +- module_expsym_cmds_GCJ \ +- lt_cv_prog_compiler_c_o_GCJ \ +- fix_srcfile_path_GCJ \ +- exclude_expsyms_GCJ \ +- include_expsyms_GCJ; do +- +- case $var in +- old_archive_cmds_GCJ | \ +- old_archive_from_new_cmds_GCJ | \ +- archive_cmds_GCJ | \ +- archive_expsym_cmds_GCJ | \ +- module_cmds_GCJ | \ +- module_expsym_cmds_GCJ | \ +- old_archive_from_expsyms_cmds_GCJ | \ +- export_symbols_cmds_GCJ | \ +- extract_expsyms_cmds | reload_cmds | finish_cmds | \ +- postinstall_cmds | postuninstall_cmds | \ +- old_postinstall_cmds | old_postuninstall_cmds | \ +- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) +- # Double-quote double-evaled strings. +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" +- ;; +- *) +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" +- ;; +- esac +- done + +- case $lt_echo in +- *'\$0 --fallback-echo"') +- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` +- ;; +- esac + +-cfgfile="$ofile" + +- cat <<__EOF__ >> "$cfgfile" +-# ### BEGIN LIBTOOL TAG CONFIG: $tagname + +-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +-# Shell to use when invoking shell scripts. +-SHELL=$lt_SHELL + +-# Whether or not to build shared libraries. +-build_libtool_libs=$enable_shared + +-# Whether or not to build static libraries. +-build_old_libs=$enable_static + +-# Whether or not to add -lc for building shared libraries. +-build_libtool_need_lc=$archive_cmds_need_lc_GCJ + +-# Whether or not to disallow shared libs when runtime libs are static +-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ + +-# Whether or not to optimize for fast installation. +-fast_install=$enable_fast_install + +-# The host system. +-host_alias=$host_alias +-host=$host +-host_os=$host_os + +-# The build system. +-build_alias=$build_alias +-build=$build +-build_os=$build_os + +-# An echo program that does not interpret backslashes. +-echo=$lt_echo + +-# The archiver. +-AR=$lt_AR +-AR_FLAGS=$lt_AR_FLAGS + +-# A C compiler. +-LTCC=$lt_LTCC + +-# LTCC compiler flags. +-LTCFLAGS=$lt_LTCFLAGS + +-# A language-specific compiler. +-CC=$lt_compiler_GCJ + +-# Is the compiler the GNU C compiler? +-with_gcc=$GCC_GCJ + +-# An ERE matcher. +-EGREP=$lt_EGREP + +-# The linker used to build libraries. +-LD=$lt_LD_GCJ + +-# Whether we need hard or soft links. +-LN_S=$lt_LN_S + +-# A BSD-compatible nm program. +-NM=$lt_NM + +-# A symbol stripping program +-STRIP=$lt_STRIP + +-# Used to examine libraries when file_magic_cmd begins "file" +-MAGIC_CMD=$MAGIC_CMD + +-# Used on cygwin: DLL creation program. +-DLLTOOL="$DLLTOOL" + +-# Used on cygwin: object dumper. +-OBJDUMP="$OBJDUMP" + +-# Used on cygwin: assembler. +-AS="$AS" + +-# The name of the directory that contains temporary libtool files. +-objdir=$objdir + +-# How to create reloadable object files. +-reload_flag=$lt_reload_flag +-reload_cmds=$lt_reload_cmds + +-# How to pass a linker flag through the compiler. +-wl=$lt_lt_prog_compiler_wl_GCJ + +-# Object file suffix (normally "o"). +-objext="$ac_objext" + +-# Old archive suffix (normally "a"). +-libext="$libext" + +-# Shared library suffix (normally ".so"). +-shrext_cmds='$shrext_cmds' + +-# Executable file suffix (normally ""). +-exeext="$exeext" + +-# Additional compiler flags for building library objects. +-pic_flag=$lt_lt_prog_compiler_pic_GCJ +-pic_mode=$pic_mode + +-# What is the maximum length of a command? +-max_cmd_len=$lt_cv_sys_max_cmd_len + +-# Does compiler simultaneously support -c and -o options? +-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ + +-# Must we lock files when doing compilation? +-need_locks=$lt_need_locks + +-# Do we need the lib prefix for modules? +-need_lib_prefix=$need_lib_prefix + +-# Do we need a version for libraries? +-need_version=$need_version + +-# Whether dlopen is supported. +-dlopen_support=$enable_dlopen + +-# Whether dlopen of programs is supported. +-dlopen_self=$enable_dlopen_self + +-# Whether dlopen of statically linked programs is supported. +-dlopen_self_static=$enable_dlopen_self_static + +-# Compiler flag to prevent dynamic linking. +-link_static_flag=$lt_lt_prog_compiler_static_GCJ + +-# Compiler flag to turn off builtin functions. +-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ + +-# Compiler flag to allow reflexive dlopens. +-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ + +-# Compiler flag to generate shared objects directly from archives. +-whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ + +-# Compiler flag to generate thread-safe objects. +-thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ + +-# Library versioning type. +-version_type=$version_type + +-# Format of library name prefix. +-libname_spec=$lt_libname_spec + +-# List of archive names. First name is the real one, the rest are links. +-# The last name is the one that the linker finds with -lNAME. +-library_names_spec=$lt_library_names_spec + +-# The coded name of the library, if different from the real name. +-soname_spec=$lt_soname_spec + +-# Commands used to build and install an old-style archive. +-RANLIB=$lt_RANLIB +-old_archive_cmds=$lt_old_archive_cmds_GCJ +-old_postinstall_cmds=$lt_old_postinstall_cmds +-old_postuninstall_cmds=$lt_old_postuninstall_cmds + +-# Create an old-style archive from a shared archive. +-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ + +-# Create a temporary old-style archive to link instead of a shared archive. +-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ + +-# Commands used to build and install a shared archive. +-archive_cmds=$lt_archive_cmds_GCJ +-archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ +-postinstall_cmds=$lt_postinstall_cmds +-postuninstall_cmds=$lt_postuninstall_cmds + +-# Commands used to build a loadable module (assumed same as above if empty) +-module_cmds=$lt_module_cmds_GCJ +-module_expsym_cmds=$lt_module_expsym_cmds_GCJ + +-# Commands to strip libraries. +-old_striplib=$lt_old_striplib +-striplib=$lt_striplib + +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predep_objects=$lt_predep_objects_GCJ +- +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdep_objects=$lt_postdep_objects_GCJ +- +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predeps=$lt_predeps_GCJ +- +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdeps=$lt_postdeps_GCJ +- +-# The library search path used internally by the compiler when linking +-# a shared library. +-compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ + +-# Method to check whether dependent libraries are shared objects. +-deplibs_check_method=$lt_deplibs_check_method + +-# Command to use when deplibs_check_method == file_magic. +-file_magic_cmd=$lt_file_magic_cmd + +-# Flag that allows shared libraries with undefined symbols to be built. +-allow_undefined_flag=$lt_allow_undefined_flag_GCJ + +-# Flag that forces no undefined symbols. +-no_undefined_flag=$lt_no_undefined_flag_GCJ + +-# Commands used to finish a libtool library installation in a directory. +-finish_cmds=$lt_finish_cmds + +-# Same as above, but a single script fragment to be evaled but not shown. +-finish_eval=$lt_finish_eval + +-# Take the output of nm and produce a listing of raw symbols and C names. +-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +-# Transform the output of nm in a proper C declaration +-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +-# Transform the output of nm in a C name address pair +-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +-# This is the shared library runtime path variable. +-runpath_var=$runpath_var + +-# This is the shared library path variable. +-shlibpath_var=$shlibpath_var + +-# Is shlibpath searched before the hard-coded library search path? +-shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +-# How to hardcode a shared library path into an executable. +-hardcode_action=$hardcode_action_GCJ + +-# Whether we should hardcode library paths into libraries. +-hardcode_into_libs=$hardcode_into_libs + +-# Flag to hardcode \$libdir into a binary during linking. +-# This must work even if \$libdir does not exist. +-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ + +-# If ld is used when linking, flag to hardcode \$libdir into +-# a binary during linking. This must work even if \$libdir does +-# not exist. +-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ +- +-# Whether we need a single -rpath flag with a separated argument. +-hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ +- +-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +-# resulting binary. +-hardcode_direct=$hardcode_direct_GCJ +- +-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +-# resulting binary. +-hardcode_minus_L=$hardcode_minus_L_GCJ +- +-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +-# the resulting binary. +-hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ +- +-# Set to yes if building a shared library automatically hardcodes DIR into the library +-# and all subsequent libraries and executables linked against it. +-hardcode_automatic=$hardcode_automatic_GCJ + +-# Variables whose values should be saved in libtool wrapper scripts and +-# restored at relink time. +-variables_saved_for_relink="$variables_saved_for_relink" + +-# Whether libtool must link a program against all its dependency libraries. +-link_all_deplibs=$link_all_deplibs_GCJ + +-# Compile-time system search path for libraries +-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +-# Run-time system search path for libraries +-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +-# Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path=$lt_fix_srcfile_path + +-# Set to yes if exported symbols are required. +-always_export_symbols=$always_export_symbols_GCJ + +-# The commands to list exported symbols. +-export_symbols_cmds=$lt_export_symbols_cmds_GCJ + +-# The commands to extract the exported symbol list from a shared archive. +-extract_expsyms_cmds=$lt_extract_expsyms_cmds + +-# Symbols that should not be listed in the preloaded symbols. +-exclude_expsyms=$lt_exclude_expsyms_GCJ + +-# Symbols that must always be exported. +-include_expsyms=$lt_include_expsyms_GCJ ++ { echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } ++hardcode_action= ++if test -n "$hardcode_libdir_flag_spec" || ++ test -n "$runpath_var" || ++ test "X$hardcode_automatic" = "Xyes" ; then ++ ++ # We can hardcode non-existent directories. ++ if test "$hardcode_direct" != no && ++ # If the only mechanism to avoid hardcoding is shlibpath_var, we ++ # have to relink, otherwise we might link with an installed library ++ # when we should be linking with a yet-to-be-installed one ++ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && ++ test "$hardcode_minus_L" != no; then ++ # Linking always hardcodes the temporary library directory. ++ hardcode_action=relink ++ else ++ # We can link without hardcoding, and we can hardcode nonexisting dirs. ++ hardcode_action=immediate ++ fi ++else ++ # We cannot hardcode anything, or else we can only hardcode existing ++ # directories. ++ hardcode_action=unsupported ++fi ++{ echo "$as_me:$LINENO: result: $hardcode_action" >&5 ++echo "${ECHO_T}$hardcode_action" >&6; } ++ ++if test "$hardcode_action" = relink || ++ test "$inherit_rpath" = yes; then ++ # Fast installation is not supported ++ enable_fast_install=no ++elif test "$shlibpath_overrides_runpath" = yes || ++ test "$enable_shared" = no; then ++ # Fast installation is not necessary ++ enable_fast_install=needless ++fi ++ ++ ++ ++ ++ ++ ++ if test "x$enable_dlopen" != xyes; then ++ enable_dlopen=unknown ++ enable_dlopen_self=unknown ++ enable_dlopen_self_static=unknown ++else ++ lt_cv_dlopen=no ++ lt_cv_dlopen_libs= ++ ++ case $host_os in ++ beos*) ++ lt_cv_dlopen="load_add_on" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes ++ ;; + +-# ### END LIBTOOL TAG CONFIG: $tagname ++ mingw* | pw32*) ++ lt_cv_dlopen="LoadLibrary" ++ lt_cv_dlopen_libs= ++ ;; + +-__EOF__ ++ cygwin*) ++ lt_cv_dlopen="dlopen" ++ lt_cv_dlopen_libs= ++ ;; + ++ darwin*) ++ # if libdl is installed we need to link against it ++ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 ++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dl_dlopen+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldl $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dlopen (); ++int ++main () ++{ ++return dlopen (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dl_dlopen=yes + else +- # If there is no Makefile yet, we rely on a make rule to execute +- # `config.status --recheck' to rerun these tests and create the +- # libtool script then. +- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` +- if test -f "$ltmain_in"; then +- test -f Makefile && make "$ltmain" +- fi +-fi +- +- +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu +- +-CC="$lt_save_CC" +- +- else +- tagname="" +- fi +- ;; +- +- RC) +- +- +-# Source file extension for RC test sources. +-ac_ext=rc +- +-# Object file extension for compiled RC test sources. +-objext=o +-objext_RC=$objext +- +-# Code to be used in simple compile tests +-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' +- +-# Code to be used in simple link tests +-lt_simple_link_test_code="$lt_simple_compile_test_code" +- +-# ltmain only uses $CC for tagged configurations so make sure $CC is set. +- +-# If no C compiler was specified, use CC. +-LTCC=${LTCC-"$CC"} +- +-# If no C compiler flags were specified, use CFLAGS. +-LTCFLAGS=${LTCFLAGS-"$CFLAGS"} +- +-# Allow CC to be a program name with arguments. +-compiler=$CC ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + ++ ac_cv_lib_dl_dlopen=no ++fi + +-# save warnings/boilerplate of simple test code +-ac_outfile=conftest.$ac_objext +-echo "$lt_simple_compile_test_code" >conftest.$ac_ext +-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +-_lt_compiler_boilerplate=`cat conftest.err` +-$rm conftest* ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } ++if test $ac_cv_lib_dl_dlopen = yes; then ++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" ++else + +-ac_outfile=conftest.$ac_objext +-echo "$lt_simple_link_test_code" >conftest.$ac_ext +-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +-_lt_linker_boilerplate=`cat conftest.err` +-$rm conftest* ++ lt_cv_dlopen="dyld" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes + ++fi + +-# Allow CC to be a program name with arguments. +-lt_save_CC="$CC" +-CC=${RC-"windres"} +-compiler=$CC +-compiler_RC=$CC +-for cc_temp in $compiler""; do +- case $cc_temp in +- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; +- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; +- \-*) ;; +- *) break;; +- esac +-done +-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++ ;; + +-lt_cv_prog_compiler_c_o_RC=yes ++ *) ++ { echo "$as_me:$LINENO: checking for shl_load" >&5 ++echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; } ++if test "${ac_cv_func_shl_load+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define shl_load to an innocuous variant, in case declares shl_load. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define shl_load innocuous_shl_load + +-# The else clause should only fire when bootstrapping the +-# libtool distribution, otherwise you forgot to ship ltmain.sh +-# with your package, and you will get complaints that there are +-# no rules to generate ltmain.sh. +-if test -f "$ltmain"; then +- # See if we are running on zsh, and set the options which allow our commands through +- # without removal of \ escapes. +- if test -n "${ZSH_VERSION+set}" ; then +- setopt NO_GLOB_SUBST +- fi +- # Now quote all the things that may contain metacharacters while being +- # careful not to overquote the AC_SUBSTed values. We take copies of the +- # variables and quote the copies for generation of the libtool script. +- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ +- SED SHELL STRIP \ +- libname_spec library_names_spec soname_spec extract_expsyms_cmds \ +- old_striplib striplib file_magic_cmd finish_cmds finish_eval \ +- deplibs_check_method reload_flag reload_cmds need_locks \ +- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ +- lt_cv_sys_global_symbol_to_c_name_address \ +- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ +- old_postinstall_cmds old_postuninstall_cmds \ +- compiler_RC \ +- CC_RC \ +- LD_RC \ +- lt_prog_compiler_wl_RC \ +- lt_prog_compiler_pic_RC \ +- lt_prog_compiler_static_RC \ +- lt_prog_compiler_no_builtin_flag_RC \ +- export_dynamic_flag_spec_RC \ +- thread_safe_flag_spec_RC \ +- whole_archive_flag_spec_RC \ +- enable_shared_with_static_runtimes_RC \ +- old_archive_cmds_RC \ +- old_archive_from_new_cmds_RC \ +- predep_objects_RC \ +- postdep_objects_RC \ +- predeps_RC \ +- postdeps_RC \ +- compiler_lib_search_path_RC \ +- archive_cmds_RC \ +- archive_expsym_cmds_RC \ +- postinstall_cmds_RC \ +- postuninstall_cmds_RC \ +- old_archive_from_expsyms_cmds_RC \ +- allow_undefined_flag_RC \ +- no_undefined_flag_RC \ +- export_symbols_cmds_RC \ +- hardcode_libdir_flag_spec_RC \ +- hardcode_libdir_flag_spec_ld_RC \ +- hardcode_libdir_separator_RC \ +- hardcode_automatic_RC \ +- module_cmds_RC \ +- module_expsym_cmds_RC \ +- lt_cv_prog_compiler_c_o_RC \ +- fix_srcfile_path_RC \ +- exclude_expsyms_RC \ +- include_expsyms_RC; do +- +- case $var in +- old_archive_cmds_RC | \ +- old_archive_from_new_cmds_RC | \ +- archive_cmds_RC | \ +- archive_expsym_cmds_RC | \ +- module_cmds_RC | \ +- module_expsym_cmds_RC | \ +- old_archive_from_expsyms_cmds_RC | \ +- export_symbols_cmds_RC | \ +- extract_expsyms_cmds | reload_cmds | finish_cmds | \ +- postinstall_cmds | postuninstall_cmds | \ +- old_postinstall_cmds | old_postuninstall_cmds | \ +- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) +- # Double-quote double-evaled strings. +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" +- ;; +- *) +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" +- ;; +- esac +- done ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char shl_load (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ + +- case $lt_echo in +- *'\$0 --fallback-echo"') +- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` +- ;; +- esac ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif + +-cfgfile="$ofile" ++#undef shl_load + +- cat <<__EOF__ >> "$cfgfile" +-# ### BEGIN LIBTOOL TAG CONFIG: $tagname ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char shl_load (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_shl_load || defined __stub___shl_load ++choke me ++#endif + +-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: ++int ++main () ++{ ++return shl_load (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_shl_load=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-# Shell to use when invoking shell scripts. +-SHELL=$lt_SHELL ++ ac_cv_func_shl_load=no ++fi + +-# Whether or not to build shared libraries. +-build_libtool_libs=$enable_shared ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 ++echo "${ECHO_T}$ac_cv_func_shl_load" >&6; } ++if test $ac_cv_func_shl_load = yes; then ++ lt_cv_dlopen="shl_load" ++else ++ { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 ++echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dld_shl_load+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldld $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +-# Whether or not to build static libraries. +-build_old_libs=$enable_static ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char shl_load (); ++int ++main () ++{ ++return shl_load (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dld_shl_load=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-# Whether or not to add -lc for building shared libraries. +-build_libtool_need_lc=$archive_cmds_need_lc_RC ++ ac_cv_lib_dld_shl_load=no ++fi + +-# Whether or not to disallow shared libs when runtime libs are static +-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 ++echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; } ++if test $ac_cv_lib_dld_shl_load = yes; then ++ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" ++else ++ { echo "$as_me:$LINENO: checking for dlopen" >&5 ++echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; } ++if test "${ac_cv_func_dlopen+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define dlopen to an innocuous variant, in case declares dlopen. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define dlopen innocuous_dlopen + +-# Whether or not to optimize for fast installation. +-fast_install=$enable_fast_install ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char dlopen (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ + +-# The host system. +-host_alias=$host_alias +-host=$host +-host_os=$host_os ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif + +-# The build system. +-build_alias=$build_alias +-build=$build +-build_os=$build_os ++#undef dlopen + +-# An echo program that does not interpret backslashes. +-echo=$lt_echo ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dlopen (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_dlopen || defined __stub___dlopen ++choke me ++#endif + +-# The archiver. +-AR=$lt_AR +-AR_FLAGS=$lt_AR_FLAGS ++int ++main () ++{ ++return dlopen (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_dlopen=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-# A C compiler. +-LTCC=$lt_LTCC ++ ac_cv_func_dlopen=no ++fi + +-# LTCC compiler flags. +-LTCFLAGS=$lt_LTCFLAGS ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_func_dlopen" >&6; } ++if test $ac_cv_func_dlopen = yes; then ++ lt_cv_dlopen="dlopen" ++else ++ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 ++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dl_dlopen+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldl $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +-# A language-specific compiler. +-CC=$lt_compiler_RC ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dlopen (); ++int ++main () ++{ ++return dlopen (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dl_dlopen=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-# Is the compiler the GNU C compiler? +-with_gcc=$GCC_RC ++ ac_cv_lib_dl_dlopen=no ++fi + +-# An ERE matcher. +-EGREP=$lt_EGREP ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } ++if test $ac_cv_lib_dl_dlopen = yes; then ++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" ++else ++ { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 ++echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; } ++if test "${ac_cv_lib_svld_dlopen+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lsvld $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +-# The linker used to build libraries. +-LD=$lt_LD_RC ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dlopen (); ++int ++main () ++{ ++return dlopen (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_svld_dlopen=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-# Whether we need hard or soft links. +-LN_S=$lt_LN_S ++ ac_cv_lib_svld_dlopen=no ++fi + +-# A BSD-compatible nm program. +-NM=$lt_NM ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; } ++if test $ac_cv_lib_svld_dlopen = yes; then ++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" ++else ++ { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 ++echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dld_dld_link+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldld $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +-# A symbol stripping program +-STRIP=$lt_STRIP ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dld_link (); ++int ++main () ++{ ++return dld_link (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dld_dld_link=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-# Used to examine libraries when file_magic_cmd begins "file" +-MAGIC_CMD=$MAGIC_CMD ++ ac_cv_lib_dld_dld_link=no ++fi + +-# Used on cygwin: DLL creation program. +-DLLTOOL="$DLLTOOL" ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 ++echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; } ++if test $ac_cv_lib_dld_dld_link = yes; then ++ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" ++fi + +-# Used on cygwin: object dumper. +-OBJDUMP="$OBJDUMP" + +-# Used on cygwin: assembler. +-AS="$AS" ++fi + +-# The name of the directory that contains temporary libtool files. +-objdir=$objdir + +-# How to create reloadable object files. +-reload_flag=$lt_reload_flag +-reload_cmds=$lt_reload_cmds ++fi + +-# How to pass a linker flag through the compiler. +-wl=$lt_lt_prog_compiler_wl_RC + +-# Object file suffix (normally "o"). +-objext="$ac_objext" ++fi + +-# Old archive suffix (normally "a"). +-libext="$libext" + +-# Shared library suffix (normally ".so"). +-shrext_cmds='$shrext_cmds' ++fi + +-# Executable file suffix (normally ""). +-exeext="$exeext" + +-# Additional compiler flags for building library objects. +-pic_flag=$lt_lt_prog_compiler_pic_RC +-pic_mode=$pic_mode ++fi + +-# What is the maximum length of a command? +-max_cmd_len=$lt_cv_sys_max_cmd_len ++ ;; ++ esac + +-# Does compiler simultaneously support -c and -o options? +-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC ++ if test "x$lt_cv_dlopen" != xno; then ++ enable_dlopen=yes ++ else ++ enable_dlopen=no ++ fi + +-# Must we lock files when doing compilation? +-need_locks=$lt_need_locks ++ case $lt_cv_dlopen in ++ dlopen) ++ save_CPPFLAGS="$CPPFLAGS" ++ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + +-# Do we need the lib prefix for modules? +-need_lib_prefix=$need_lib_prefix ++ save_LDFLAGS="$LDFLAGS" ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + +-# Do we need a version for libraries? +-need_version=$need_version ++ save_LIBS="$LIBS" ++ LIBS="$lt_cv_dlopen_libs $LIBS" + +-# Whether dlopen is supported. +-dlopen_support=$enable_dlopen ++ { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 ++echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; } ++if test "${lt_cv_dlopen_self+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test "$cross_compiling" = yes; then : ++ lt_cv_dlopen_self=cross ++else ++ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 ++ lt_status=$lt_dlunknown ++ cat > conftest.$ac_ext <<_LT_EOF ++#line 10867 "configure" ++#include "confdefs.h" + +-# Whether dlopen of programs is supported. +-dlopen_self=$enable_dlopen_self ++#if HAVE_DLFCN_H ++#include ++#endif + +-# Whether dlopen of statically linked programs is supported. +-dlopen_self_static=$enable_dlopen_self_static ++#include + +-# Compiler flag to prevent dynamic linking. +-link_static_flag=$lt_lt_prog_compiler_static_RC ++#ifdef RTLD_GLOBAL ++# define LT_DLGLOBAL RTLD_GLOBAL ++#else ++# ifdef DL_GLOBAL ++# define LT_DLGLOBAL DL_GLOBAL ++# else ++# define LT_DLGLOBAL 0 ++# endif ++#endif + +-# Compiler flag to turn off builtin functions. +-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC ++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we ++ find out it does not work in some platform. */ ++#ifndef LT_DLLAZY_OR_NOW ++# ifdef RTLD_LAZY ++# define LT_DLLAZY_OR_NOW RTLD_LAZY ++# else ++# ifdef DL_LAZY ++# define LT_DLLAZY_OR_NOW DL_LAZY ++# else ++# ifdef RTLD_NOW ++# define LT_DLLAZY_OR_NOW RTLD_NOW ++# else ++# ifdef DL_NOW ++# define LT_DLLAZY_OR_NOW DL_NOW ++# else ++# define LT_DLLAZY_OR_NOW 0 ++# endif ++# endif ++# endif ++# endif ++#endif + +-# Compiler flag to allow reflexive dlopens. +-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC ++#ifdef __cplusplus ++extern "C" void exit (int); ++#endif + +-# Compiler flag to generate shared objects directly from archives. +-whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC ++void fnord() { int i=42;} ++int main () ++{ ++ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); ++ int status = $lt_dlunknown; + +-# Compiler flag to generate thread-safe objects. +-thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC ++ if (self) ++ { ++ if (dlsym (self,"fnord")) status = $lt_dlno_uscore; ++ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; ++ /* dlclose (self); */ ++ } ++ else ++ puts (dlerror ()); + +-# Library versioning type. +-version_type=$version_type ++ exit (status); ++} ++_LT_EOF ++ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then ++ (./conftest; exit; ) >&5 2>/dev/null ++ lt_status=$? ++ case x$lt_status in ++ x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; ++ x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; ++ x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; ++ esac ++ else : ++ # compilation failed ++ lt_cv_dlopen_self=no ++ fi ++fi ++rm -fr conftest* + +-# Format of library name prefix. +-libname_spec=$lt_libname_spec + +-# List of archive names. First name is the real one, the rest are links. +-# The last name is the one that the linker finds with -lNAME. +-library_names_spec=$lt_library_names_spec ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 ++echo "${ECHO_T}$lt_cv_dlopen_self" >&6; } + +-# The coded name of the library, if different from the real name. +-soname_spec=$lt_soname_spec ++ if test "x$lt_cv_dlopen_self" = xyes; then ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" ++ { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 ++echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; } ++if test "${lt_cv_dlopen_self_static+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test "$cross_compiling" = yes; then : ++ lt_cv_dlopen_self_static=cross ++else ++ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 ++ lt_status=$lt_dlunknown ++ cat > conftest.$ac_ext <<_LT_EOF ++#line 10967 "configure" ++#include "confdefs.h" + +-# Commands used to build and install an old-style archive. +-RANLIB=$lt_RANLIB +-old_archive_cmds=$lt_old_archive_cmds_RC +-old_postinstall_cmds=$lt_old_postinstall_cmds +-old_postuninstall_cmds=$lt_old_postuninstall_cmds ++#if HAVE_DLFCN_H ++#include ++#endif + +-# Create an old-style archive from a shared archive. +-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC ++#include + +-# Create a temporary old-style archive to link instead of a shared archive. +-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC ++#ifdef RTLD_GLOBAL ++# define LT_DLGLOBAL RTLD_GLOBAL ++#else ++# ifdef DL_GLOBAL ++# define LT_DLGLOBAL DL_GLOBAL ++# else ++# define LT_DLGLOBAL 0 ++# endif ++#endif + +-# Commands used to build and install a shared archive. +-archive_cmds=$lt_archive_cmds_RC +-archive_expsym_cmds=$lt_archive_expsym_cmds_RC +-postinstall_cmds=$lt_postinstall_cmds +-postuninstall_cmds=$lt_postuninstall_cmds ++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we ++ find out it does not work in some platform. */ ++#ifndef LT_DLLAZY_OR_NOW ++# ifdef RTLD_LAZY ++# define LT_DLLAZY_OR_NOW RTLD_LAZY ++# else ++# ifdef DL_LAZY ++# define LT_DLLAZY_OR_NOW DL_LAZY ++# else ++# ifdef RTLD_NOW ++# define LT_DLLAZY_OR_NOW RTLD_NOW ++# else ++# ifdef DL_NOW ++# define LT_DLLAZY_OR_NOW DL_NOW ++# else ++# define LT_DLLAZY_OR_NOW 0 ++# endif ++# endif ++# endif ++# endif ++#endif + +-# Commands used to build a loadable module (assumed same as above if empty) +-module_cmds=$lt_module_cmds_RC +-module_expsym_cmds=$lt_module_expsym_cmds_RC ++#ifdef __cplusplus ++extern "C" void exit (int); ++#endif + +-# Commands to strip libraries. +-old_striplib=$lt_old_striplib +-striplib=$lt_striplib ++void fnord() { int i=42;} ++int main () ++{ ++ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); ++ int status = $lt_dlunknown; + +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predep_objects=$lt_predep_objects_RC +- +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdep_objects=$lt_postdep_objects_RC +- +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predeps=$lt_predeps_RC +- +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdeps=$lt_postdeps_RC +- +-# The library search path used internally by the compiler when linking +-# a shared library. +-compiler_lib_search_path=$lt_compiler_lib_search_path_RC ++ if (self) ++ { ++ if (dlsym (self,"fnord")) status = $lt_dlno_uscore; ++ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; ++ /* dlclose (self); */ ++ } ++ else ++ puts (dlerror ()); + +-# Method to check whether dependent libraries are shared objects. +-deplibs_check_method=$lt_deplibs_check_method ++ exit (status); ++} ++_LT_EOF ++ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then ++ (./conftest; exit; ) >&5 2>/dev/null ++ lt_status=$? ++ case x$lt_status in ++ x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; ++ x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; ++ x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; ++ esac ++ else : ++ # compilation failed ++ lt_cv_dlopen_self_static=no ++ fi ++fi ++rm -fr conftest* + +-# Command to use when deplibs_check_method == file_magic. +-file_magic_cmd=$lt_file_magic_cmd + +-# Flag that allows shared libraries with undefined symbols to be built. +-allow_undefined_flag=$lt_allow_undefined_flag_RC ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 ++echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; } ++ fi + +-# Flag that forces no undefined symbols. +-no_undefined_flag=$lt_no_undefined_flag_RC ++ CPPFLAGS="$save_CPPFLAGS" ++ LDFLAGS="$save_LDFLAGS" ++ LIBS="$save_LIBS" ++ ;; ++ esac + +-# Commands used to finish a libtool library installation in a directory. +-finish_cmds=$lt_finish_cmds ++ case $lt_cv_dlopen_self in ++ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; ++ *) enable_dlopen_self=unknown ;; ++ esac ++ ++ case $lt_cv_dlopen_self_static in ++ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; ++ *) enable_dlopen_self_static=unknown ;; ++ esac ++fi + +-# Same as above, but a single script fragment to be evaled but not shown. +-finish_eval=$lt_finish_eval + +-# Take the output of nm and produce a listing of raw symbols and C names. +-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +-# Transform the output of nm in a proper C declaration +-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +-# Transform the output of nm in a C name address pair +-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +-# This is the shared library runtime path variable. +-runpath_var=$runpath_var + +-# This is the shared library path variable. +-shlibpath_var=$shlibpath_var + +-# Is shlibpath searched before the hard-coded library search path? +-shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +-# How to hardcode a shared library path into an executable. +-hardcode_action=$hardcode_action_RC + +-# Whether we should hardcode library paths into libraries. +-hardcode_into_libs=$hardcode_into_libs + +-# Flag to hardcode \$libdir into a binary during linking. +-# This must work even if \$libdir does not exist. +-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC + +-# If ld is used when linking, flag to hardcode \$libdir into +-# a binary during linking. This must work even if \$libdir does +-# not exist. +-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC +- +-# Whether we need a single -rpath flag with a separated argument. +-hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC +- +-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +-# resulting binary. +-hardcode_direct=$hardcode_direct_RC +- +-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +-# resulting binary. +-hardcode_minus_L=$hardcode_minus_L_RC +- +-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +-# the resulting binary. +-hardcode_shlibpath_var=$hardcode_shlibpath_var_RC +- +-# Set to yes if building a shared library automatically hardcodes DIR into the library +-# and all subsequent libraries and executables linked against it. +-hardcode_automatic=$hardcode_automatic_RC + +-# Variables whose values should be saved in libtool wrapper scripts and +-# restored at relink time. +-variables_saved_for_relink="$variables_saved_for_relink" + +-# Whether libtool must link a program against all its dependency libraries. +-link_all_deplibs=$link_all_deplibs_RC + +-# Compile-time system search path for libraries +-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +-# Run-time system search path for libraries +-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +-# Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path=$lt_fix_srcfile_path + +-# Set to yes if exported symbols are required. +-always_export_symbols=$always_export_symbols_RC ++striplib= ++old_striplib= ++{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 ++echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; } ++if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then ++ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" ++ test -z "$striplib" && striplib="$STRIP --strip-unneeded" ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++# FIXME - insert some real tests, host_os isn't really good enough ++ case $host_os in ++ darwin*) ++ if test -n "$STRIP" ; then ++ striplib="$STRIP -x" ++ old_striplib="$STRIP -S" ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ fi ++ ;; ++ *) ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ ;; ++ esac ++fi + +-# The commands to list exported symbols. +-export_symbols_cmds=$lt_export_symbols_cmds_RC + +-# The commands to extract the exported symbol list from a shared archive. +-extract_expsyms_cmds=$lt_extract_expsyms_cmds + +-# Symbols that should not be listed in the preloaded symbols. +-exclude_expsyms=$lt_exclude_expsyms_RC + +-# Symbols that must always be exported. +-include_expsyms=$lt_include_expsyms_RC + +-# ### END LIBTOOL TAG CONFIG: $tagname + +-__EOF__ + + +-else +- # If there is no Makefile yet, we rely on a make rule to execute +- # `config.status --recheck' to rerun these tests and create the +- # libtool script then. +- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` +- if test -f "$ltmain_in"; then +- test -f Makefile && make "$ltmain" +- fi +-fi + + +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu + +-CC="$lt_save_CC" + +- ;; ++ # Report which library types will actually be built ++ { echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 ++echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; } ++ { echo "$as_me:$LINENO: result: $can_build_shared" >&5 ++echo "${ECHO_T}$can_build_shared" >&6; } + +- *) +- { { echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5 +-echo "$as_me: error: Unsupported tag name: $tagname" >&2;} +- { (exit 1); exit 1; }; } +- ;; +- esac ++ { echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 ++echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; } ++ test "$can_build_shared" = "no" && enable_shared=no + +- # Append the new tag name to the list of available tags. +- if test -n "$tagname" ; then +- available_tags="$available_tags $tagname" +- fi ++ # On AIX, shared libraries and static libraries use the same namespace, and ++ # are all built from PIC. ++ case $host_os in ++ aix3*) ++ test "$enable_shared" = yes && enable_static=no ++ if test -n "$RANLIB"; then ++ archive_cmds="$archive_cmds~\$RANLIB \$lib" ++ postinstall_cmds='$RANLIB $lib' + fi +- done +- IFS="$lt_save_ifs" ++ ;; + +- # Now substitute the updated list of available tags. +- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then +- mv "${ofile}T" "$ofile" +- chmod +x "$ofile" +- else +- rm -f "${ofile}T" +- { { echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5 +-echo "$as_me: error: unable to update list of available tagged configurations." >&2;} +- { (exit 1); exit 1; }; } +- fi +-fi ++ aix[4-9]*) ++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then ++ test "$enable_shared" = yes && enable_static=no ++ fi ++ ;; ++ esac ++ { echo "$as_me:$LINENO: result: $enable_shared" >&5 ++echo "${ECHO_T}$enable_shared" >&6; } + ++ { echo "$as_me:$LINENO: checking whether to build static libraries" >&5 ++echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; } ++ # Make sure either enable_shared or enable_static is yes. ++ test "$enable_shared" = yes || enable_static=yes ++ { echo "$as_me:$LINENO: result: $enable_static" >&5 ++echo "${ECHO_T}$enable_static" >&6; } + + +-# This can be used to rebuild libtool when needed +-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" + +-# Always use our own libtool. +-LIBTOOL='$(SHELL) $(top_builddir)/libtool' + +-# Prevent multiple expansion ++fi ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu + ++CC="$lt_save_CC" + + + +@@ -19737,10 +11187,12 @@ + + + ++ ac_config_commands="$ac_config_commands libtool" + + + + ++# Only expand once: + + + +@@ -20341,24 +11793,187 @@ + { echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5 + echo "${ECHO_T}$PKG_CONFIG" >&6; } + else +- { echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_path_PKG_CONFIG"; then ++ ac_pt_PKG_CONFIG=$PKG_CONFIG ++ # Extract the first word of "pkg-config", so it can be a program name with args. ++set dummy pkg-config; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $ac_pt_PKG_CONFIG in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG ++if test -n "$ac_pt_PKG_CONFIG"; then ++ { echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5 ++echo "${ECHO_T}$ac_pt_PKG_CONFIG" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_pt_PKG_CONFIG" = x; then ++ PKG_CONFIG="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ PKG_CONFIG=$ac_pt_PKG_CONFIG ++ fi ++else ++ PKG_CONFIG="$ac_cv_path_PKG_CONFIG" ++fi ++ ++fi ++if test -n "$PKG_CONFIG"; then ++ _pkg_min_version=0.9.0 ++ { echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5 ++echo $ECHO_N "checking pkg-config is at least version $_pkg_min_version... $ECHO_C" >&6; } ++ if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ PKG_CONFIG="" ++ fi ++ ++fi ++ ++gdu_cv_version_required=0.3.2 ++ ++if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gnome-doc-utils >= \$gdu_cv_version_required\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "gnome-doc-utils >= $gdu_cv_version_required") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ gdu_cv_have_gdu=yes ++else ++ gdu_cv_have_gdu=no ++fi ++ ++if test "$gdu_cv_have_gdu" = "yes"; then ++ : ++else ++ { { echo "$as_me:$LINENO: error: gnome-doc-utils >= $gdu_cv_version_required not found" >&5 ++echo "$as_me: error: gnome-doc-utils >= $gdu_cv_version_required not found" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++ ++ ++# Check whether --with-help-dir was given. ++if test "${with_help_dir+set}" = set; then ++ withval=$with_help_dir; ++else ++ with_help_dir='${datadir}/gnome/help' ++fi ++ ++HELP_DIR="$with_help_dir" ++ ++ ++ ++# Check whether --with-omf-dir was given. ++if test "${with_omf_dir+set}" = set; then ++ withval=$with_omf_dir; ++else ++ with_omf_dir='${datadir}/omf' ++fi ++ ++OMF_DIR="$with_omf_dir" ++ ++ ++ ++# Check whether --with-help-formats was given. ++if test "${with_help_formats+set}" = set; then ++ withval=$with_help_formats; ++else ++ with_help_formats='' ++fi ++ ++DOC_USER_FORMATS="$with_help_formats" ++ ++ ++# Check whether --enable-scrollkeeper was given. ++if test "${enable_scrollkeeper+set}" = set; then ++ enableval=$enable_scrollkeeper; ++else ++ enable_scrollkeeper=yes ++fi ++ ++ ++ ++if test "$gdu_cv_have_gdu" = "yes" -a "$enable_scrollkeeper" = "yes"; then ++ ENABLE_SK_TRUE= ++ ENABLE_SK_FALSE='#' ++else ++ ENABLE_SK_TRUE='#' ++ ENABLE_SK_FALSE= ++fi ++ ++ ++DISTCHECK_CONFIGURE_FLAGS="--disable-scrollkeeper $DISTCHECK_CONFIGURE_FLAGS" ++ ++ ++ ++ ++if test "$gdu_cv_have_gdu" = "yes"; then ++ HAVE_GNOME_DOC_UTILS_TRUE= ++ HAVE_GNOME_DOC_UTILS_FALSE='#' ++else ++ HAVE_GNOME_DOC_UTILS_TRUE='#' ++ HAVE_GNOME_DOC_UTILS_FALSE= + fi + + +-fi +-if test -z "$ac_cv_path_PKG_CONFIG"; then +- ac_pt_PKG_CONFIG=$PKG_CONFIG +- # Extract the first word of "pkg-config", so it can be a program name with args. +-set dummy pkg-config; ac_word=$2 ++ ++ ++# Extract the first word of "glib-genmarshal", so it can be a program name with args. ++set dummy glib-genmarshal; ac_word=$2 + { echo "$as_me:$LINENO: checking for $ac_word" >&5 + echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +-if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then ++if test "${ac_cv_path_GLIB_GENMARSHAL+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- case $ac_pt_PKG_CONFIG in ++ case $GLIB_GENMARSHAL in + [\\/]* | ?:[\\/]*) +- ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. ++ ac_cv_path_GLIB_GENMARSHAL="$GLIB_GENMARSHAL" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +@@ -20368,7 +11983,7 @@ + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" ++ ac_cv_path_GLIB_GENMARSHAL="$as_dir/$ac_word$ac_exec_ext" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +@@ -20379,230 +11994,553 @@ + ;; + esac + fi +-ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG +-if test -n "$ac_pt_PKG_CONFIG"; then +- { echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5 +-echo "${ECHO_T}$ac_pt_PKG_CONFIG" >&6; } ++GLIB_GENMARSHAL=$ac_cv_path_GLIB_GENMARSHAL ++if test -n "$GLIB_GENMARSHAL"; then ++ { echo "$as_me:$LINENO: result: $GLIB_GENMARSHAL" >&5 ++echo "${ECHO_T}$GLIB_GENMARSHAL" >&6; } + else + { echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6; } + fi + +- if test "x$ac_pt_PKG_CONFIG" = x; then +- PKG_CONFIG="" +- else +- case $cross_compiling:$ac_tool_warned in +-yes:) +-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +-whose name does not start with the host triplet. If you think this +-configuration is useful to you, please write to autoconf@gnu.org." >&5 +-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +-whose name does not start with the host triplet. If you think this +-configuration is useful to you, please write to autoconf@gnu.org." >&2;} +-ac_tool_warned=yes ;; +-esac +- PKG_CONFIG=$ac_pt_PKG_CONFIG +- fi +-else +- PKG_CONFIG="$ac_cv_path_PKG_CONFIG" ++ ++ ++if test "$GCC" = "yes"; then ++ CPPFLAGS="$CPPFLAGS -Wcast-align -Wno-uninitialized" ++ CPPFLAGS="$CPPFLAGS -Wall -Wformat-security" + fi + ++CPPFLAGS="$CPPFLAGS -g" ++CPPFLAGS="$CPPFLAGS -fexceptions" ++ ++#CPPFLAGS="$CPPFLAGS -c -pg" ++#LDFLAGS="$LDFLAGS -pg" ++ ++GETTEXT_PACKAGE=gnome-power-manager ++ ++ ++cat >>confdefs.h <<\_ACEOF ++#define GETTEXT_PACKAGE "gnome-power-manager" ++_ACEOF ++ ++ ++ ++ ++for ac_header in locale.h ++do ++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ { echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-if test -n "$PKG_CONFIG"; then +- _pkg_min_version=0.9.0 +- { echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5 +-echo $ECHO_N "checking pkg-config is at least version $_pkg_min_version... $ECHO_C" >&6; } +- if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then +- { echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6; } +- else +- { echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6; } +- PKG_CONFIG="" +- fi ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++else ++ # Is the header compilable? ++{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 ++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++$ac_includes_default ++#include <$ac_header> ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_header_compiler=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + ++ ac_header_compiler=no + fi + +-gdu_cv_version_required=0.3.2 ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + +-if test -n "$PKG_CONFIG" && \ +- { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gnome-doc-utils >= \$gdu_cv_version_required\"") >&5 +- ($PKG_CONFIG --exists --print-errors "gnome-doc-utils >= $gdu_cv_version_required") 2>&5 ++# Is the header present? ++{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 ++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include <$ac_header> ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- gdu_cv_have_gdu=yes ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ ac_header_preproc=yes + else +- gdu_cv_have_gdu=no ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_header_preproc=no + fi + +-if test "$gdu_cv_have_gdu" = "yes"; then +- : ++rm -f conftest.err conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } ++ ++# So? What about this header? ++case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in ++ yes:no: ) ++ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 ++echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 ++echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ++ ac_header_preproc=yes ++ ;; ++ no:yes:* ) ++ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 ++echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 ++echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 ++echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 ++echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 ++echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 ++echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ++ ++ ;; ++esac ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ eval "$as_ac_Header=\$ac_header_preproc" ++fi ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++ ++fi ++if test `eval echo '${'$as_ac_Header'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++_ACEOF ++ ++fi ++ ++done ++ ++ if test $ac_cv_header_locale_h = yes; then ++ { echo "$as_me:$LINENO: checking for LC_MESSAGES" >&5 ++echo $ECHO_N "checking for LC_MESSAGES... $ECHO_C" >&6; } ++if test "${am_cv_val_LC_MESSAGES+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++int ++main () ++{ ++return LC_MESSAGES ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ am_cv_val_LC_MESSAGES=yes + else +- { { echo "$as_me:$LINENO: error: gnome-doc-utils >= $gdu_cv_version_required not found" >&5 +-echo "$as_me: error: gnome-doc-utils >= $gdu_cv_version_required not found" >&2;} +- { (exit 1); exit 1; }; } +-fi +- +- ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-# Check whether --with-help-dir was given. +-if test "${with_help_dir+set}" = set; then +- withval=$with_help_dir; +-else +- with_help_dir='${datadir}/gnome/help' ++ am_cv_val_LC_MESSAGES=no + fi + +-HELP_DIR="$with_help_dir" +- ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $am_cv_val_LC_MESSAGES" >&5 ++echo "${ECHO_T}$am_cv_val_LC_MESSAGES" >&6; } ++ if test $am_cv_val_LC_MESSAGES = yes; then + ++cat >>confdefs.h <<\_ACEOF ++#define HAVE_LC_MESSAGES 1 ++_ACEOF + +-# Check whether --with-omf-dir was given. +-if test "${with_omf_dir+set}" = set; then +- withval=$with_omf_dir; +-else +- with_omf_dir='${datadir}/omf' +-fi ++ fi ++ fi ++ USE_NLS=yes + +-OMF_DIR="$with_omf_dir" + ++ gt_cv_have_gettext=no + ++ CATOBJEXT=NONE ++ XGETTEXT=: ++ INTLLIBS= + +-# Check whether --with-help-formats was given. +-if test "${with_help_formats+set}" = set; then +- withval=$with_help_formats; +-else +- with_help_formats='' ++ if test "${ac_cv_header_libintl_h+set}" = set; then ++ { echo "$as_me:$LINENO: checking for libintl.h" >&5 ++echo $ECHO_N "checking for libintl.h... $ECHO_C" >&6; } ++if test "${ac_cv_header_libintl_h+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + fi ++{ echo "$as_me:$LINENO: result: $ac_cv_header_libintl_h" >&5 ++echo "${ECHO_T}$ac_cv_header_libintl_h" >&6; } ++else ++ # Is the header compilable? ++{ echo "$as_me:$LINENO: checking libintl.h usability" >&5 ++echo $ECHO_N "checking libintl.h usability... $ECHO_C" >&6; } ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++$ac_includes_default ++#include ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_header_compiler=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-DOC_USER_FORMATS="$with_help_formats" ++ ac_header_compiler=no ++fi + ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + +-# Check whether --enable-scrollkeeper was given. +-if test "${enable_scrollkeeper+set}" = set; then +- enableval=$enable_scrollkeeper; ++# Is the header present? ++{ echo "$as_me:$LINENO: checking libintl.h presence" >&5 ++echo $ECHO_N "checking libintl.h presence... $ECHO_C" >&6; } ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ ac_header_preproc=yes + else +- enable_scrollkeeper=yes +-fi ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +- if test "$gdu_cv_have_gdu" = "yes" -a "$enable_scrollkeeper" = "yes"; then +- ENABLE_SK_TRUE= +- ENABLE_SK_FALSE='#' +-else +- ENABLE_SK_TRUE='#' +- ENABLE_SK_FALSE= ++ ac_header_preproc=no + fi + ++rm -f conftest.err conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + +-DISTCHECK_CONFIGURE_FLAGS="--disable-scrollkeeper $DISTCHECK_CONFIGURE_FLAGS" +- ++# So? What about this header? ++case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in ++ yes:no: ) ++ { echo "$as_me:$LINENO: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&5 ++echo "$as_me: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the compiler's result" >&5 ++echo "$as_me: WARNING: libintl.h: proceeding with the compiler's result" >&2;} ++ ac_header_preproc=yes ++ ;; ++ no:yes:* ) ++ { echo "$as_me:$LINENO: WARNING: libintl.h: present but cannot be compiled" >&5 ++echo "$as_me: WARNING: libintl.h: present but cannot be compiled" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: check for missing prerequisite headers?" >&5 ++echo "$as_me: WARNING: libintl.h: check for missing prerequisite headers?" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: see the Autoconf documentation" >&5 ++echo "$as_me: WARNING: libintl.h: see the Autoconf documentation" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: section \"Present But Cannot Be Compiled\"" >&5 ++echo "$as_me: WARNING: libintl.h: section \"Present But Cannot Be Compiled\"" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the preprocessor's result" >&5 ++echo "$as_me: WARNING: libintl.h: proceeding with the preprocessor's result" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: in the future, the compiler will take precedence" >&5 ++echo "$as_me: WARNING: libintl.h: in the future, the compiler will take precedence" >&2;} + +- if test "$gdu_cv_have_gdu" = "yes"; then +- HAVE_GNOME_DOC_UTILS_TRUE= +- HAVE_GNOME_DOC_UTILS_FALSE='#' ++ ;; ++esac ++{ echo "$as_me:$LINENO: checking for libintl.h" >&5 ++echo $ECHO_N "checking for libintl.h... $ECHO_C" >&6; } ++if test "${ac_cv_header_libintl_h+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- HAVE_GNOME_DOC_UTILS_TRUE='#' +- HAVE_GNOME_DOC_UTILS_FALSE= ++ ac_cv_header_libintl_h=$ac_header_preproc + fi ++{ echo "$as_me:$LINENO: result: $ac_cv_header_libintl_h" >&5 ++echo "${ECHO_T}$ac_cv_header_libintl_h" >&6; } + ++fi ++if test $ac_cv_header_libintl_h = yes; then ++ gt_cv_func_dgettext_libintl="no" ++ libintl_extra_libs="" + +- +- +-# Extract the first word of "glib-genmarshal", so it can be a program name with args. +-set dummy glib-genmarshal; ac_word=$2 +-{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +-if test "${ac_cv_path_GLIB_GENMARSHAL+set}" = set; then ++ # ++ # First check in libc ++ # ++ { echo "$as_me:$LINENO: checking for ngettext in libc" >&5 ++echo $ECHO_N "checking for ngettext in libc... $ECHO_C" >&6; } ++if test "${gt_cv_func_ngettext_libc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- case $GLIB_GENMARSHAL in +- [\\/]* | ?:[\\/]*) +- ac_cv_path_GLIB_GENMARSHAL="$GLIB_GENMARSHAL" # Let the user override the test with a path. +- ;; +- *) +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_path_GLIB_GENMARSHAL="$as_dir/$ac_word$ac_exec_ext" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +-done +-IFS=$as_save_IFS ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +- ;; ++#include ++ ++int ++main () ++{ ++return !ngettext ("","", 1) ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; + esac +-fi +-GLIB_GENMARSHAL=$ac_cv_path_GLIB_GENMARSHAL +-if test -n "$GLIB_GENMARSHAL"; then +- { echo "$as_me:$LINENO: result: $GLIB_GENMARSHAL" >&5 +-echo "${ECHO_T}$GLIB_GENMARSHAL" >&6; } ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ gt_cv_func_ngettext_libc=yes + else +- { echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6; } +-fi +- +- ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-if test "$GCC" = "yes"; then +- CPPFLAGS="$CPPFLAGS -Werror -Wcast-align -Wno-uninitialized" +- CPPFLAGS="$CPPFLAGS -Wall -Wformat-security" ++ gt_cv_func_ngettext_libc=no + fi + +-CPPFLAGS="$CPPFLAGS -g" +-CPPFLAGS="$CPPFLAGS -fexceptions" ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext + +-#CPPFLAGS="$CPPFLAGS -c -pg" +-#LDFLAGS="$LDFLAGS -pg" ++fi ++{ echo "$as_me:$LINENO: result: $gt_cv_func_ngettext_libc" >&5 ++echo "${ECHO_T}$gt_cv_func_ngettext_libc" >&6; } + +-GETTEXT_PACKAGE=gnome-power-manager ++ if test "$gt_cv_func_ngettext_libc" = "yes" ; then ++ { echo "$as_me:$LINENO: checking for dgettext in libc" >&5 ++echo $ECHO_N "checking for dgettext in libc... $ECHO_C" >&6; } ++if test "${gt_cv_func_dgettext_libc+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + ++#include + +-cat >>confdefs.h <<\_ACEOF +-#define GETTEXT_PACKAGE "gnome-power-manager" ++int ++main () ++{ ++return !dgettext ("","") ++ ; ++ return 0; ++} + _ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ gt_cv_func_dgettext_libc=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ gt_cv_func_dgettext_libc=no ++fi + ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext + ++fi ++{ echo "$as_me:$LINENO: result: $gt_cv_func_dgettext_libc" >&5 ++echo "${ECHO_T}$gt_cv_func_dgettext_libc" >&6; } ++ fi + ++ if test "$gt_cv_func_ngettext_libc" = "yes" ; then + +-for ac_header in locale.h ++for ac_func in bind_textdomain_codeset + do +-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- { echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +-fi +-ac_res=`eval echo '${'$as_ac_Header'}'` +- { echo "$as_me:$LINENO: result: $ac_res" >&5 +-echo "${ECHO_T}$ac_res" >&6; } + else +- # Is the header compilable? +-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } +-cat >conftest.$ac_ext <<_ACEOF ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +-$ac_includes_default +-#include <$ac_header> ++/* Define $ac_func to an innocuous variant, in case declares $ac_func. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define $ac_func innocuous_$ac_func ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char $ac_func (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef $ac_func ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char $ac_func (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_$ac_func || defined __stub___$ac_func ++choke me ++#endif ++ ++int ++main () ++{ ++return $ac_func (); ++ ; ++ return 0; ++} + _ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac + eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_compile") 2>conftest.er1 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 +@@ -20611,121 +12549,126 @@ + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_header_compiler=yes ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ eval "$as_ac_var=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_header_compiler=no ++ eval "$as_ac_var=no" + fi + +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6; } ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++if test `eval echo '${'$as_ac_var'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 ++_ACEOF + +-# Is the header present? +-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } ++fi ++done ++ ++ fi ++ ++ # ++ # If we don't have everything we want, check in libintl ++ # ++ if test "$gt_cv_func_dgettext_libc" != "yes" \ ++ || test "$gt_cv_func_ngettext_libc" != "yes" \ ++ || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then ++ ++ { echo "$as_me:$LINENO: checking for bindtextdomain in -lintl" >&5 ++echo $ECHO_N "checking for bindtextdomain in -lintl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_intl_bindtextdomain+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lintl $LIBS" + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +-#include <$ac_header> ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char bindtextdomain (); ++int ++main () ++{ ++return bindtextdomain (); ++ ; ++ return 0; ++} + _ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac + eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- }; then +- ac_header_preproc=yes ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_intl_bindtextdomain=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_header_preproc=no +-fi +- +-rm -f conftest.err conftest.$ac_ext +-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6; } +- +-# So? What about this header? +-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +- yes:no: ) +- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} +- ac_header_preproc=yes +- ;; +- no:yes:* ) +- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +- +- ;; +-esac +-{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- eval "$as_ac_Header=\$ac_header_preproc" +-fi +-ac_res=`eval echo '${'$as_ac_Header'}'` +- { echo "$as_me:$LINENO: result: $ac_res" >&5 +-echo "${ECHO_T}$ac_res" >&6; } +- ++ ac_cv_lib_intl_bindtextdomain=no + fi +-if test `eval echo '${'$as_ac_Header'}'` = yes; then +- cat >>confdefs.h <<_ACEOF +-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +-_ACEOF + ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS + fi +- +-done +- +- if test $ac_cv_header_locale_h = yes; then +- { echo "$as_me:$LINENO: checking for LC_MESSAGES" >&5 +-echo $ECHO_N "checking for LC_MESSAGES... $ECHO_C" >&6; } +-if test "${am_cv_val_LC_MESSAGES+set}" = set; then ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_bindtextdomain" >&5 ++echo "${ECHO_T}$ac_cv_lib_intl_bindtextdomain" >&6; } ++if test $ac_cv_lib_intl_bindtextdomain = yes; then ++ { echo "$as_me:$LINENO: checking for ngettext in -lintl" >&5 ++echo $ECHO_N "checking for ngettext in -lintl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_intl_ngettext+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- cat >conftest.$ac_ext <<_ACEOF ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lintl $LIBS" ++cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +-#include ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char ngettext (); + int + main () + { +-return LC_MESSAGES ++return ngettext (); + ; + return 0; + } +@@ -20748,65 +12691,58 @@ + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then +- am_cv_val_LC_MESSAGES=yes ++ ac_cv_lib_intl_ngettext=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- am_cv_val_LC_MESSAGES=no ++ ac_cv_lib_intl_ngettext=no + fi + + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS + fi +-{ echo "$as_me:$LINENO: result: $am_cv_val_LC_MESSAGES" >&5 +-echo "${ECHO_T}$am_cv_val_LC_MESSAGES" >&6; } +- if test $am_cv_val_LC_MESSAGES = yes; then +- +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_LC_MESSAGES 1 +-_ACEOF +- +- fi +- fi +- USE_NLS=yes +- +- +- gt_cv_have_gettext=no +- +- CATOBJEXT=NONE +- XGETTEXT=: +- INTLLIBS= +- +- if test "${ac_cv_header_libintl_h+set}" = set; then +- { echo "$as_me:$LINENO: checking for libintl.h" >&5 +-echo $ECHO_N "checking for libintl.h... $ECHO_C" >&6; } +-if test "${ac_cv_header_libintl_h+set}" = set; then ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_ngettext" >&5 ++echo "${ECHO_T}$ac_cv_lib_intl_ngettext" >&6; } ++if test $ac_cv_lib_intl_ngettext = yes; then ++ { echo "$as_me:$LINENO: checking for dgettext in -lintl" >&5 ++echo $ECHO_N "checking for dgettext in -lintl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_intl_dgettext+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +-fi +-{ echo "$as_me:$LINENO: result: $ac_cv_header_libintl_h" >&5 +-echo "${ECHO_T}$ac_cv_header_libintl_h" >&6; } + else +- # Is the header compilable? +-{ echo "$as_me:$LINENO: checking libintl.h usability" >&5 +-echo $ECHO_N "checking libintl.h usability... $ECHO_C" >&6; } ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lintl $LIBS" + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +-$ac_includes_default +-#include ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dgettext (); ++int ++main () ++{ ++return dgettext (); ++ ; ++ return 0; ++} + _ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac + eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_compile") 2>conftest.er1 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 +@@ -20815,119 +12751,123 @@ + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_header_compiler=yes ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_intl_dgettext=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_header_compiler=no ++ ac_cv_lib_intl_dgettext=no + fi + +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6; } ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_dgettext" >&5 ++echo "${ECHO_T}$ac_cv_lib_intl_dgettext" >&6; } ++if test $ac_cv_lib_intl_dgettext = yes; then ++ gt_cv_func_dgettext_libintl=yes ++fi + +-# Is the header present? +-{ echo "$as_me:$LINENO: checking libintl.h presence" >&5 +-echo $ECHO_N "checking libintl.h presence... $ECHO_C" >&6; } ++fi ++ ++fi ++ ++ ++ if test "$gt_cv_func_dgettext_libintl" != "yes" ; then ++ { echo "$as_me:$LINENO: checking if -liconv is needed to use gettext" >&5 ++echo $ECHO_N "checking if -liconv is needed to use gettext... $ECHO_C" >&6; } ++ { echo "$as_me:$LINENO: result: " >&5 ++echo "${ECHO_T}" >&6; } ++ { echo "$as_me:$LINENO: checking for ngettext in -lintl" >&5 ++echo $ECHO_N "checking for ngettext in -lintl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_intl_ngettext+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lintl -liconv $LIBS" + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +-#include ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char ngettext (); ++int ++main () ++{ ++return ngettext (); ++ ; ++ return 0; ++} + _ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac + eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- }; then +- ac_header_preproc=yes ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_intl_ngettext=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_header_preproc=no +-fi +- +-rm -f conftest.err conftest.$ac_ext +-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6; } +- +-# So? What about this header? +-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +- yes:no: ) +- { echo "$as_me:$LINENO: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&5 +-echo "$as_me: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&2;} +- { echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the compiler's result" >&5 +-echo "$as_me: WARNING: libintl.h: proceeding with the compiler's result" >&2;} +- ac_header_preproc=yes +- ;; +- no:yes:* ) +- { echo "$as_me:$LINENO: WARNING: libintl.h: present but cannot be compiled" >&5 +-echo "$as_me: WARNING: libintl.h: present but cannot be compiled" >&2;} +- { echo "$as_me:$LINENO: WARNING: libintl.h: check for missing prerequisite headers?" >&5 +-echo "$as_me: WARNING: libintl.h: check for missing prerequisite headers?" >&2;} +- { echo "$as_me:$LINENO: WARNING: libintl.h: see the Autoconf documentation" >&5 +-echo "$as_me: WARNING: libintl.h: see the Autoconf documentation" >&2;} +- { echo "$as_me:$LINENO: WARNING: libintl.h: section \"Present But Cannot Be Compiled\"" >&5 +-echo "$as_me: WARNING: libintl.h: section \"Present But Cannot Be Compiled\"" >&2;} +- { echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the preprocessor's result" >&5 +-echo "$as_me: WARNING: libintl.h: proceeding with the preprocessor's result" >&2;} +- { echo "$as_me:$LINENO: WARNING: libintl.h: in the future, the compiler will take precedence" >&5 +-echo "$as_me: WARNING: libintl.h: in the future, the compiler will take precedence" >&2;} +- +- ;; +-esac +-{ echo "$as_me:$LINENO: checking for libintl.h" >&5 +-echo $ECHO_N "checking for libintl.h... $ECHO_C" >&6; } +-if test "${ac_cv_header_libintl_h+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_cv_header_libintl_h=$ac_header_preproc ++ ac_cv_lib_intl_ngettext=no + fi +-{ echo "$as_me:$LINENO: result: $ac_cv_header_libintl_h" >&5 +-echo "${ECHO_T}$ac_cv_header_libintl_h" >&6; } + ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS + fi +-if test $ac_cv_header_libintl_h = yes; then +- gt_cv_func_dgettext_libintl="no" +- libintl_extra_libs="" +- +- # +- # First check in libc +- # +- { echo "$as_me:$LINENO: checking for ngettext in libc" >&5 +-echo $ECHO_N "checking for ngettext in libc... $ECHO_C" >&6; } +-if test "${gt_cv_func_ngettext_libc+set}" = set; then ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_ngettext" >&5 ++echo "${ECHO_T}$ac_cv_lib_intl_ngettext" >&6; } ++if test $ac_cv_lib_intl_ngettext = yes; then ++ { echo "$as_me:$LINENO: checking for dcgettext in -lintl" >&5 ++echo $ECHO_N "checking for dcgettext in -lintl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_intl_dcgettext+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- cat >conftest.$ac_ext <<_ACEOF ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lintl -liconv $LIBS" ++cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-#include +- ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dcgettext (); + int + main () + { +-return !ngettext ("","", 1) ++return dcgettext (); + ; + return 0; + } +@@ -20950,25 +12890,49 @@ + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then +- gt_cv_func_ngettext_libc=yes ++ ac_cv_lib_intl_dcgettext=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- gt_cv_func_ngettext_libc=no ++ ac_cv_lib_intl_dcgettext=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_dcgettext" >&5 ++echo "${ECHO_T}$ac_cv_lib_intl_dcgettext" >&6; } ++if test $ac_cv_lib_intl_dcgettext = yes; then ++ gt_cv_func_dgettext_libintl=yes ++ libintl_extra_libs=-liconv ++else ++ : ++fi ++ ++else ++ : + fi + +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++ fi + +-fi +-{ echo "$as_me:$LINENO: result: $gt_cv_func_ngettext_libc" >&5 +-echo "${ECHO_T}$gt_cv_func_ngettext_libc" >&6; } ++ # ++ # If we found libintl, then check in it for bind_textdomain_codeset(); ++ # we'll prefer libc if neither have bind_textdomain_codeset(), ++ # and both have dgettext and ngettext ++ # ++ if test "$gt_cv_func_dgettext_libintl" = "yes" ; then ++ glib_save_LIBS="$LIBS" ++ LIBS="$LIBS -lintl $libintl_extra_libs" ++ unset ac_cv_func_bind_textdomain_codeset + +- if test "$gt_cv_func_ngettext_libc" = "yes" ; then +- { echo "$as_me:$LINENO: checking for dgettext in libc" >&5 +-echo $ECHO_N "checking for dgettext in libc... $ECHO_C" >&6; } +-if test "${gt_cv_func_dgettext_libc+set}" = set; then ++for ac_func in bind_textdomain_codeset ++do ++as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -20977,13 +12941,41 @@ + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ ++/* Define $ac_func to an innocuous variant, in case declares $ac_func. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define $ac_func innocuous_$ac_func + +-#include ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char $ac_func (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef $ac_func ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char $ac_func (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_$ac_func || defined __stub___$ac_func ++choke me ++#endif + + int + main () + { +-return !dgettext ("","") ++return $ac_func (); + ; + return 0; + } +@@ -21006,25 +12998,96 @@ + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then +- gt_cv_func_dgettext_libc=yes ++ eval "$as_ac_var=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- gt_cv_func_dgettext_libc=no ++ eval "$as_ac_var=no" + fi + + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext ++fi ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++if test `eval echo '${'$as_ac_var'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 ++_ACEOF + + fi +-{ echo "$as_me:$LINENO: result: $gt_cv_func_dgettext_libc" >&5 +-echo "${ECHO_T}$gt_cv_func_dgettext_libc" >&6; } ++done ++ ++ LIBS="$glib_save_LIBS" ++ ++ if test "$ac_cv_func_bind_textdomain_codeset" = "yes" ; then ++ gt_cv_func_dgettext_libc=no ++ else ++ if test "$gt_cv_func_dgettext_libc" = "yes" \ ++ && test "$gt_cv_func_ngettext_libc" = "yes"; then ++ gt_cv_func_dgettext_libintl=no ++ fi ++ fi ++ fi + fi + +- if test "$gt_cv_func_ngettext_libc" = "yes" ; then ++ if test "$gt_cv_func_dgettext_libc" = "yes" \ ++ || test "$gt_cv_func_dgettext_libintl" = "yes"; then ++ gt_cv_have_gettext=yes ++ fi + +-for ac_func in bind_textdomain_codeset ++ if test "$gt_cv_func_dgettext_libintl" = "yes"; then ++ INTLLIBS="-lintl $libintl_extra_libs" ++ fi ++ ++ if test "$gt_cv_have_gettext" = "yes"; then ++ ++cat >>confdefs.h <<\_ACEOF ++#define HAVE_GETTEXT 1 ++_ACEOF ++ ++ # Extract the first word of "msgfmt", so it can be a program name with args. ++set dummy msgfmt; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_MSGFMT+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case "$MSGFMT" in ++ /*) ++ ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. ++ ;; ++ *) ++ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" ++ for ac_dir in $PATH; do ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$ac_word; then ++ if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then ++ ac_cv_path_MSGFMT="$ac_dir/$ac_word" ++ break ++ fi ++ fi ++ done ++ IFS="$ac_save_ifs" ++ test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no" ++ ;; ++esac ++fi ++MSGFMT="$ac_cv_path_MSGFMT" ++if test "$MSGFMT" != "no"; then ++ { echo "$as_me:$LINENO: result: $MSGFMT" >&5 ++echo "${ECHO_T}$MSGFMT" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ if test "$MSGFMT" != "no"; then ++ glib_save_LIBS="$LIBS" ++ LIBS="$LIBS $INTLLIBS" ++ ++for ac_func in dcgettext + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` + { echo "$as_me:$LINENO: checking for $ac_func" >&5 +@@ -21117,40 +13180,124 @@ + fi + done + +- fi ++ MSGFMT_OPTS= ++ { echo "$as_me:$LINENO: checking if msgfmt accepts -c" >&5 ++echo $ECHO_N "checking if msgfmt accepts -c... $ECHO_C" >&6; } ++ cat >conftest.foo <<_ACEOF + +- # +- # If we don't have everything we want, check in libintl +- # +- if test "$gt_cv_func_dgettext_libc" != "yes" \ +- || test "$gt_cv_func_ngettext_libc" != "yes" \ +- || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then ++msgid "" ++msgstr "" ++"Content-Type: text/plain; charset=UTF-8\n" ++"Project-Id-Version: test 1.0\n" ++"PO-Revision-Date: 2007-02-15 12:01+0100\n" ++"Last-Translator: test \n" ++"Language-Team: C \n" ++"MIME-Version: 1.0\n" ++"Content-Transfer-Encoding: 8bit\n" + +- { echo "$as_me:$LINENO: checking for bindtextdomain in -lintl" >&5 +-echo $ECHO_N "checking for bindtextdomain in -lintl... $ECHO_C" >&6; } +-if test "${ac_cv_lib_intl_bindtextdomain+set}" = set; then ++_ACEOF ++if { (echo "$as_me:$LINENO: \$MSGFMT -c -o /dev/null conftest.foo") >&5 ++ ($MSGFMT -c -o /dev/null conftest.foo) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ MSGFMT_OPTS=-c; { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++echo "$as_me: failed input was:" >&5 ++sed 's/^/| /' conftest.foo >&5 ++fi ++ ++ # Extract the first word of "gmsgfmt", so it can be a program name with args. ++set dummy gmsgfmt; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_GMSGFMT+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lintl $LIBS" +-cat >conftest.$ac_ext <<_ACEOF ++ case $GMSGFMT in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" ++ ;; ++esac ++fi ++GMSGFMT=$ac_cv_path_GMSGFMT ++if test -n "$GMSGFMT"; then ++ { echo "$as_me:$LINENO: result: $GMSGFMT" >&5 ++echo "${ECHO_T}$GMSGFMT" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ # Extract the first word of "xgettext", so it can be a program name with args. ++set dummy xgettext; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_XGETTEXT+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case "$XGETTEXT" in ++ /*) ++ ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. ++ ;; ++ *) ++ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" ++ for ac_dir in $PATH; do ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$ac_word; then ++ if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then ++ ac_cv_path_XGETTEXT="$ac_dir/$ac_word" ++ break ++ fi ++ fi ++ done ++ IFS="$ac_save_ifs" ++ test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" ++ ;; ++esac ++fi ++XGETTEXT="$ac_cv_path_XGETTEXT" ++if test "$XGETTEXT" != ":"; then ++ { echo "$as_me:$LINENO: result: $XGETTEXT" >&5 ++echo "${ECHO_T}$XGETTEXT" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char bindtextdomain (); + int + main () + { +-return bindtextdomain (); ++extern int _nl_msg_cat_cntr; ++ return _nl_msg_cat_cntr + ; + return 0; + } +@@ -21173,34 +13320,41 @@ + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then +- ac_cv_lib_intl_bindtextdomain=yes ++ CATOBJEXT=.gmo ++ DATADIRNAME=share + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_lib_intl_bindtextdomain=no +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_bindtextdomain" >&5 +-echo "${ECHO_T}$ac_cv_lib_intl_bindtextdomain" >&6; } +-if test $ac_cv_lib_intl_bindtextdomain = yes; then +- { echo "$as_me:$LINENO: checking for ngettext in -lintl" >&5 +-echo $ECHO_N "checking for ngettext in -lintl... $ECHO_C" >&6; } +-if test "${ac_cv_lib_intl_ngettext+set}" = set; then ++ case $host in ++ *-*-solaris*) ++ { echo "$as_me:$LINENO: checking for bind_textdomain_codeset" >&5 ++echo $ECHO_N "checking for bind_textdomain_codeset... $ECHO_C" >&6; } ++if test "${ac_cv_func_bind_textdomain_codeset+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lintl $LIBS" +-cat >conftest.$ac_ext <<_ACEOF ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ ++/* Define bind_textdomain_codeset to an innocuous variant, in case declares bind_textdomain_codeset. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define bind_textdomain_codeset innocuous_bind_textdomain_codeset ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char bind_textdomain_codeset (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef bind_textdomain_codeset + + /* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC +@@ -21208,11 +13362,18 @@ + #ifdef __cplusplus + extern "C" + #endif +-char ngettext (); ++char bind_textdomain_codeset (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_bind_textdomain_codeset || defined __stub___bind_textdomain_codeset ++choke me ++#endif ++ + int + main () + { +-return ngettext (); ++return bind_textdomain_codeset (); + ; + return 0; + } +@@ -21226,1728 +13387,2632 @@ + eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_bind_textdomain_codeset=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_func_bind_textdomain_codeset=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_bind_textdomain_codeset" >&5 ++echo "${ECHO_T}$ac_cv_func_bind_textdomain_codeset" >&6; } ++if test $ac_cv_func_bind_textdomain_codeset = yes; then ++ CATOBJEXT=.gmo ++ DATADIRNAME=share ++else ++ CATOBJEXT=.mo ++ DATADIRNAME=lib ++fi ++ ++ ;; ++ *) ++ CATOBJEXT=.mo ++ DATADIRNAME=lib ++ ;; ++ esac ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ LIBS="$glib_save_LIBS" ++ INSTOBJEXT=.mo ++ else ++ gt_cv_have_gettext=no ++ fi ++ fi ++ ++fi ++ ++ ++ ++ if test "$gt_cv_have_gettext" = "yes" ; then ++ ++cat >>confdefs.h <<\_ACEOF ++#define ENABLE_NLS 1 ++_ACEOF ++ ++ fi ++ ++ if test "$XGETTEXT" != ":"; then ++ if $XGETTEXT --omit-header /dev/null 2> /dev/null; then ++ : ; ++ else ++ { echo "$as_me:$LINENO: result: found xgettext program is not GNU xgettext; ignore it" >&5 ++echo "${ECHO_T}found xgettext program is not GNU xgettext; ignore it" >&6; } ++ XGETTEXT=":" ++ fi ++ fi ++ ++ # We need to process the po/ directory. ++ POSUB=po ++ ++ ac_config_commands="$ac_config_commands default-1" ++ ++ ++ for lang in $ALL_LINGUAS; do ++ GMOFILES="$GMOFILES $lang.gmo" ++ POFILES="$POFILES $lang.po" ++ done ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ if test "$gt_cv_have_gettext" = "yes"; then ++ if test "x$ALL_LINGUAS" = "x"; then ++ LINGUAS= ++ else ++ { echo "$as_me:$LINENO: checking for catalogs to be installed" >&5 ++echo $ECHO_N "checking for catalogs to be installed... $ECHO_C" >&6; } ++ NEW_LINGUAS= ++ for presentlang in $ALL_LINGUAS; do ++ useit=no ++ if test "%UNSET%" != "${LINGUAS-%UNSET%}"; then ++ desiredlanguages="$LINGUAS" ++ else ++ desiredlanguages="$ALL_LINGUAS" ++ fi ++ for desiredlang in $desiredlanguages; do ++ # Use the presentlang catalog if desiredlang is ++ # a. equal to presentlang, or ++ # b. a variant of presentlang (because in this case, ++ # presentlang can be used as a fallback for messages ++ # which are not translated in the desiredlang catalog). ++ case "$desiredlang" in ++ "$presentlang"*) useit=yes;; ++ esac ++ done ++ if test $useit = yes; then ++ NEW_LINGUAS="$NEW_LINGUAS $presentlang" ++ fi ++ done ++ LINGUAS=$NEW_LINGUAS ++ { echo "$as_me:$LINENO: result: $LINGUAS" >&5 ++echo "${ECHO_T}$LINGUAS" >&6; } ++ fi ++ ++ if test -n "$LINGUAS"; then ++ for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done ++ fi ++ fi ++ ++ MKINSTALLDIRS= ++ if test -n "$ac_aux_dir"; then ++ MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" ++ fi ++ if test -z "$MKINSTALLDIRS"; then ++ MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" ++ fi ++ ++ ++ test -d po || mkdir po ++ if test "x$srcdir" != "x."; then ++ if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then ++ posrcprefix="$srcdir/" ++ else ++ posrcprefix="../$srcdir/" ++ fi ++ else ++ posrcprefix="../" ++ fi ++ rm -f po/POTFILES ++ sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ ++ < $srcdir/po/POTFILES.in > po/POTFILES ++ ++ ++GLIB_REQUIRED=2.13.0 ++GTK_REQUIRED=2.11.0 ++GDK_REQUIRED=2.11.0 ++GNOME_KEYRING_REQUIRED=0.6.0 ++LIBGNOME_REQUIRED=2.14.0 ++LIBGNOMEUI_REQUIRED=2.14.0 ++HAL_REQUIRED=0.5.8 ++DBUS_REQUIRED=0.70 ++LIBGLADE_REQUIRED=2.5.0 ++LIBNOTIFY_REQUIRED=0.4.3 ++LIBWNCK_REQUIRED=2.10.0 ++CAIRO_REQUIRED=1.0.0 ++UNIQUE_REQUIRED=0.9.4 ++LIBPANEL_REQUIRED=2.0.0 ++GSTREAMER_REQUIRED=0.10 ++XRANDR_REQUIRED=1.2.0 ++POLKIT_GNOME_REQUIRED=0.8 ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for GLIB" >&5 ++echo $ECHO_N "checking for GLIB... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GLIB_CFLAGS"; then ++ pkg_cv_GLIB_CFLAGS="$GLIB_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED gobject-2.0\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED gobject-2.0") 2>&5 ++ ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- ac_cv_lib_intl_ngettext=yes ++ (exit $ac_status); }; then ++ pkg_cv_GLIB_CFLAGS=`$PKG_CONFIG --cflags "glib-2.0 >= $GLIB_REQUIRED gobject-2.0" 2>/dev/null` + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_intl_ngettext=no +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS ++ pkg_failed=yes + fi +-{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_ngettext" >&5 +-echo "${ECHO_T}$ac_cv_lib_intl_ngettext" >&6; } +-if test $ac_cv_lib_intl_ngettext = yes; then +- { echo "$as_me:$LINENO: checking for dgettext in -lintl" >&5 +-echo $ECHO_N "checking for dgettext in -lintl... $ECHO_C" >&6; } +-if test "${ac_cv_lib_intl_dgettext+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ fi + else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lintl $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char dgettext (); +-int +-main () +-{ +-return dgettext (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GLIB_LIBS"; then ++ pkg_cv_GLIB_LIBS="$GLIB_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED gobject-2.0\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED gobject-2.0") 2>&5 + ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- ac_cv_lib_intl_dgettext=yes ++ (exit $ac_status); }; then ++ pkg_cv_GLIB_LIBS=`$PKG_CONFIG --libs "glib-2.0 >= $GLIB_REQUIRED gobject-2.0" 2>/dev/null` + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_intl_dgettext=no +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS ++ pkg_failed=yes + fi +-{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_dgettext" >&5 +-echo "${ECHO_T}$ac_cv_lib_intl_dgettext" >&6; } +-if test $ac_cv_lib_intl_dgettext = yes; then +- gt_cv_func_dgettext_libintl=yes ++ fi ++else ++ pkg_failed=untried + fi + +-fi + +-fi + ++if test $pkg_failed = yes; then + +- if test "$gt_cv_func_dgettext_libintl" != "yes" ; then +- { echo "$as_me:$LINENO: checking if -liconv is needed to use gettext" >&5 +-echo $ECHO_N "checking if -liconv is needed to use gettext... $ECHO_C" >&6; } +- { echo "$as_me:$LINENO: result: " >&5 +-echo "${ECHO_T}" >&6; } +- { echo "$as_me:$LINENO: checking for ngettext in -lintl" >&5 +-echo $ECHO_N "checking for ngettext in -lintl... $ECHO_C" >&6; } +-if test "${ac_cv_lib_intl_ngettext+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes + else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lintl -liconv $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ GLIB_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "glib-2.0 >= $GLIB_REQUIRED gobject-2.0"` ++ else ++ GLIB_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "glib-2.0 >= $GLIB_REQUIRED gobject-2.0"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$GLIB_PKG_ERRORS" >&5 + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char ngettext (); +-int +-main () +-{ +-return ngettext (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- ac_cv_lib_intl_ngettext=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ { { echo "$as_me:$LINENO: error: Package requirements (glib-2.0 >= $GLIB_REQUIRED gobject-2.0) were not met: + +- ac_cv_lib_intl_ngettext=no +-fi ++$GLIB_PKG_ERRORS + +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_ngettext" >&5 +-echo "${ECHO_T}$ac_cv_lib_intl_ngettext" >&6; } +-if test $ac_cv_lib_intl_ngettext = yes; then +- { echo "$as_me:$LINENO: checking for dcgettext in -lintl" >&5 +-echo $ECHO_N "checking for dcgettext in -lintl... $ECHO_C" >&6; } +-if test "${ac_cv_lib_intl_dcgettext+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lintl -liconv $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char dcgettext (); +-int +-main () +-{ +-return dcgettext (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 ++Alternatively, you may set the environment variables GLIB_CFLAGS ++and GLIB_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (glib-2.0 >= $GLIB_REQUIRED gobject-2.0) were not met: ++ ++$GLIB_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables GLIB_CFLAGS ++and GLIB_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables GLIB_CFLAGS ++and GLIB_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables GLIB_CFLAGS ++and GLIB_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ GLIB_CFLAGS=$pkg_cv_GLIB_CFLAGS ++ GLIB_LIBS=$pkg_cv_GLIB_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for HAL" >&5 ++echo $ECHO_N "checking for HAL... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$HAL_CFLAGS"; then ++ pkg_cv_HAL_CFLAGS="$HAL_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"hal >= \$HAL_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "hal >= $HAL_REQUIRED") 2>&5 + ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- ac_cv_lib_intl_dcgettext=yes ++ (exit $ac_status); }; then ++ pkg_cv_HAL_CFLAGS=`$PKG_CONFIG --cflags "hal >= $HAL_REQUIRED" 2>/dev/null` + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_intl_dcgettext=no ++ pkg_failed=yes + fi +- +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS ++ fi ++else ++ pkg_failed=untried + fi +-{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_dcgettext" >&5 +-echo "${ECHO_T}$ac_cv_lib_intl_dcgettext" >&6; } +-if test $ac_cv_lib_intl_dcgettext = yes; then +- gt_cv_func_dgettext_libintl=yes +- libintl_extra_libs=-liconv ++if test -n "$PKG_CONFIG"; then ++ if test -n "$HAL_LIBS"; then ++ pkg_cv_HAL_LIBS="$HAL_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"hal >= \$HAL_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "hal >= $HAL_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_HAL_LIBS=`$PKG_CONFIG --libs "hal >= $HAL_REQUIRED" 2>/dev/null` + else +- : ++ pkg_failed=yes + fi +- ++ fi + else +- : ++ pkg_failed=untried + fi + +- fi + +- # +- # If we found libintl, then check in it for bind_textdomain_codeset(); +- # we'll prefer libc if neither have bind_textdomain_codeset(), +- # and both have dgettext and ngettext +- # +- if test "$gt_cv_func_dgettext_libintl" = "yes" ; then +- glib_save_LIBS="$LIBS" +- LIBS="$LIBS -lintl $libintl_extra_libs" +- unset ac_cv_func_bind_textdomain_codeset + +-for ac_func in bind_textdomain_codeset +-do +-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-{ echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } +-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define $ac_func to an innocuous variant, in case declares $ac_func. +- For example, HP-UX 11i declares gettimeofday. */ +-#define $ac_func innocuous_$ac_func ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ HAL_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "hal >= $HAL_REQUIRED"` ++ else ++ HAL_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "hal >= $HAL_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$HAL_PKG_ERRORS" >&5 + +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char $ac_func (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ ++ { { echo "$as_me:$LINENO: error: Package requirements (hal >= $HAL_REQUIRED) were not met: + +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif ++$HAL_PKG_ERRORS + +-#undef $ac_func ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char $ac_func (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_$ac_func || defined __stub___$ac_func +-choke me +-#endif ++Alternatively, you may set the environment variables HAL_CFLAGS ++and HAL_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (hal >= $HAL_REQUIRED) were not met: + +-int +-main () +-{ +-return $ac_func (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- eval "$as_ac_var=yes" +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++$HAL_PKG_ERRORS + +- eval "$as_ac_var=no" +-fi ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-ac_res=`eval echo '${'$as_ac_var'}'` +- { echo "$as_me:$LINENO: result: $ac_res" >&5 +-echo "${ECHO_T}$ac_res" >&6; } +-if test `eval echo '${'$as_ac_var'}'` = yes; then +- cat >>confdefs.h <<_ACEOF +-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +-_ACEOF ++Alternatively, you may set the environment variables HAL_CFLAGS ++and HAL_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. + +-fi +-done ++Alternatively, you may set the environment variables HAL_CFLAGS ++and HAL_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. + +- LIBS="$glib_save_LIBS" ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. + +- if test "$ac_cv_func_bind_textdomain_codeset" = "yes" ; then +- gt_cv_func_dgettext_libc=no +- else +- if test "$gt_cv_func_dgettext_libc" = "yes" \ +- && test "$gt_cv_func_ngettext_libc" = "yes"; then +- gt_cv_func_dgettext_libintl=no +- fi +- fi +- fi +- fi ++Alternatively, you may set the environment variables HAL_CFLAGS ++and HAL_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. + +- if test "$gt_cv_func_dgettext_libc" = "yes" \ +- || test "$gt_cv_func_dgettext_libintl" = "yes"; then +- gt_cv_have_gettext=yes +- fi ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ HAL_CFLAGS=$pkg_cv_HAL_CFLAGS ++ HAL_LIBS=$pkg_cv_HAL_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi + +- if test "$gt_cv_func_dgettext_libintl" = "yes"; then +- INTLLIBS="-lintl $libintl_extra_libs" +- fi + +- if test "$gt_cv_have_gettext" = "yes"; then + +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_GETTEXT 1 +-_ACEOF + +- # Extract the first word of "msgfmt", so it can be a program name with args. +-set dummy msgfmt; ac_word=$2 +-{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +-if test "${ac_cv_path_MSGFMT+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for GSTREAMER" >&5 ++echo $ECHO_N "checking for GSTREAMER... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GSTREAMER_CFLAGS"; then ++ pkg_cv_GSTREAMER_CFLAGS="$GSTREAMER_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gstreamer-0.10 >= \$GSTREAMER_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "gstreamer-0.10 >= $GSTREAMER_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GSTREAMER_CFLAGS=`$PKG_CONFIG --cflags "gstreamer-0.10 >= $GSTREAMER_REQUIRED" 2>/dev/null` + else +- case "$MSGFMT" in +- /*) +- ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. +- ;; +- *) +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" +- for ac_dir in $PATH; do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$ac_word; then +- if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then +- ac_cv_path_MSGFMT="$ac_dir/$ac_word" +- break +- fi ++ pkg_failed=yes ++fi + fi +- done +- IFS="$ac_save_ifs" +- test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no" +- ;; +-esac ++else ++ pkg_failed=untried + fi +-MSGFMT="$ac_cv_path_MSGFMT" +-if test "$MSGFMT" != "no"; then +- { echo "$as_me:$LINENO: result: $MSGFMT" >&5 +-echo "${ECHO_T}$MSGFMT" >&6; } ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GSTREAMER_LIBS"; then ++ pkg_cv_GSTREAMER_LIBS="$GSTREAMER_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gstreamer-0.10 >= \$GSTREAMER_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "gstreamer-0.10 >= $GSTREAMER_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GSTREAMER_LIBS=`$PKG_CONFIG --libs "gstreamer-0.10 >= $GSTREAMER_REQUIRED" 2>/dev/null` + else +- { echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6; } ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried + fi +- if test "$MSGFMT" != "no"; then +- glib_save_LIBS="$LIBS" +- LIBS="$LIBS $INTLLIBS" + +-for ac_func in dcgettext +-do +-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-{ echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } +-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define $ac_func to an innocuous variant, in case declares $ac_func. +- For example, HP-UX 11i declares gettimeofday. */ +-#define $ac_func innocuous_$ac_func ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ GSTREAMER_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "gstreamer-0.10 >= $GSTREAMER_REQUIRED"` ++ else ++ GSTREAMER_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "gstreamer-0.10 >= $GSTREAMER_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$GSTREAMER_PKG_ERRORS" >&5 + +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char $ac_func (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ ++ { { echo "$as_me:$LINENO: error: Package requirements (gstreamer-0.10 >= $GSTREAMER_REQUIRED) were not met: + +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif ++$GSTREAMER_PKG_ERRORS + +-#undef $ac_func ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char $ac_func (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_$ac_func || defined __stub___$ac_func +-choke me +-#endif ++Alternatively, you may set the environment variables GSTREAMER_CFLAGS ++and GSTREAMER_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (gstreamer-0.10 >= $GSTREAMER_REQUIRED) were not met: + +-int +-main () +-{ +-return $ac_func (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- eval "$as_ac_var=yes" +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++$GSTREAMER_PKG_ERRORS + +- eval "$as_ac_var=no" +-fi ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-ac_res=`eval echo '${'$as_ac_var'}'` +- { echo "$as_me:$LINENO: result: $ac_res" >&5 +-echo "${ECHO_T}$ac_res" >&6; } +-if test `eval echo '${'$as_ac_var'}'` = yes; then +- cat >>confdefs.h <<_ACEOF +-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +-_ACEOF ++Alternatively, you may set the environment variables GSTREAMER_CFLAGS ++and GSTREAMER_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables GSTREAMER_CFLAGS ++and GSTREAMER_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables GSTREAMER_CFLAGS ++and GSTREAMER_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. + ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ GSTREAMER_CFLAGS=$pkg_cv_GSTREAMER_CFLAGS ++ GSTREAMER_LIBS=$pkg_cv_GSTREAMER_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : + fi +-done + +- MSGFMT_OPTS= +- { echo "$as_me:$LINENO: checking if msgfmt accepts -c" >&5 +-echo $ECHO_N "checking if msgfmt accepts -c... $ECHO_C" >&6; } +- cat >conftest.foo <<_ACEOF + +-msgid "" +-msgstr "" +-"Content-Type: text/plain; charset=UTF-8\n" +-"Project-Id-Version: test 1.0\n" +-"PO-Revision-Date: 2007-02-15 12:01+0100\n" +-"Last-Translator: test \n" +-"Language-Team: C \n" +-"MIME-Version: 1.0\n" +-"Content-Transfer-Encoding: 8bit\n" + +-_ACEOF +-if { (echo "$as_me:$LINENO: \$MSGFMT -c -o /dev/null conftest.foo") >&5 +- ($MSGFMT -c -o /dev/null conftest.foo) 2>&5 ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for DBUS" >&5 ++echo $ECHO_N "checking for DBUS... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$DBUS_CFLAGS"; then ++ pkg_cv_DBUS_CFLAGS="$DBUS_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ dbus-glib-1 >= \$DBUS_REQUIRED ++ dbus-1 >= \$DBUS_REQUIRED ++ gthread-2.0\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +- MSGFMT_OPTS=-c; { echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6; } +-else { echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6; } +-echo "$as_me: failed input was:" >&5 +-sed 's/^/| /' conftest.foo >&5 ++ pkg_cv_DBUS_CFLAGS=`$PKG_CONFIG --cflags " ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0" 2>/dev/null` ++else ++ pkg_failed=yes + fi +- +- # Extract the first word of "gmsgfmt", so it can be a program name with args. +-set dummy gmsgfmt; ac_word=$2 +-{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +-if test "${ac_cv_path_GMSGFMT+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ fi + else +- case $GMSGFMT in +- [\\/]* | ?:[\\/]*) +- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. +- ;; +- *) +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +-done +-IFS=$as_save_IFS +- +- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" +- ;; +-esac ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$DBUS_LIBS"; then ++ pkg_cv_DBUS_LIBS="$DBUS_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ dbus-glib-1 >= \$DBUS_REQUIRED ++ dbus-1 >= \$DBUS_REQUIRED ++ gthread-2.0\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_DBUS_LIBS=`$PKG_CONFIG --libs " ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0" 2>/dev/null` ++else ++ pkg_failed=yes + fi +-GMSGFMT=$ac_cv_path_GMSGFMT +-if test -n "$GMSGFMT"; then +- { echo "$as_me:$LINENO: result: $GMSGFMT" >&5 +-echo "${ECHO_T}$GMSGFMT" >&6; } ++ fi + else +- { echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6; } ++ pkg_failed=untried + fi + + +- # Extract the first word of "xgettext", so it can be a program name with args. +-set dummy xgettext; ac_word=$2 +-{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +-if test "${ac_cv_path_XGETTEXT+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- case "$XGETTEXT" in +- /*) +- ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. +- ;; +- *) +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" +- for ac_dir in $PATH; do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$ac_word; then +- if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then +- ac_cv_path_XGETTEXT="$ac_dir/$ac_word" +- break +- fi +- fi +- done +- IFS="$ac_save_ifs" +- test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" +- ;; +-esac +-fi +-XGETTEXT="$ac_cv_path_XGETTEXT" +-if test "$XGETTEXT" != ":"; then +- { echo "$as_me:$LINENO: result: $XGETTEXT" >&5 +-echo "${ECHO_T}$XGETTEXT" >&6; } ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes + else +- { echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6; } ++ _pkg_short_errors_supported=no + fi ++ if test $_pkg_short_errors_supported = yes; then ++ DBUS_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors " ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0"` ++ else ++ DBUS_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors " ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$DBUS_PKG_ERRORS" >&5 + +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ ++ { { echo "$as_me:$LINENO: error: Package requirements ( ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0) were not met: + +-int +-main () +-{ +-extern int _nl_msg_cat_cntr; +- return _nl_msg_cat_cntr +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- CATOBJEXT=.gmo +- DATADIRNAME=share +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++$DBUS_PKG_ERRORS + +- case $host in +- *-*-solaris*) +- { echo "$as_me:$LINENO: checking for bind_textdomain_codeset" >&5 +-echo $ECHO_N "checking for bind_textdomain_codeset... $ECHO_C" >&6; } +-if test "${ac_cv_func_bind_textdomain_codeset+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables DBUS_CFLAGS ++and DBUS_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements ( ++ dbus-glib-1 >= $DBUS_REQUIRED ++ dbus-1 >= $DBUS_REQUIRED ++ gthread-2.0) were not met: ++ ++$DBUS_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables DBUS_CFLAGS ++and DBUS_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables DBUS_CFLAGS ++and DBUS_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables DBUS_CFLAGS ++and DBUS_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define bind_textdomain_codeset to an innocuous variant, in case declares bind_textdomain_codeset. +- For example, HP-UX 11i declares gettimeofday. */ +-#define bind_textdomain_codeset innocuous_bind_textdomain_codeset ++ DBUS_CFLAGS=$pkg_cv_DBUS_CFLAGS ++ DBUS_LIBS=$pkg_cv_DBUS_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi + +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char bind_textdomain_codeset (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ + +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif + +-#undef bind_textdomain_codeset + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char bind_textdomain_codeset (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_bind_textdomain_codeset || defined __stub___bind_textdomain_codeset +-choke me +-#endif ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for GNOME" >&5 ++echo $ECHO_N "checking for GNOME... $ECHO_C" >&6; } + +-int +-main () +-{ +-return bind_textdomain_codeset (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GNOME_CFLAGS"; then ++ pkg_cv_GNOME_CFLAGS="$GNOME_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ libgnomeui-2.0 >= \$LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= \$LIBGLADE_REQUIRED ++ libwnck-1.0 >= \$LIBWNCK_REQUIRED ++ gtk+-2.0 >= \$GTK_REQUIRED ++ gnome-keyring-1 >= \$GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= \$LIBPANEL_REQUIRED ++ cairo >= \$CAIRO_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GNOME_CFLAGS=`$PKG_CONFIG --cflags " ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GNOME_LIBS"; then ++ pkg_cv_GNOME_LIBS="$GNOME_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ libgnomeui-2.0 >= \$LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= \$LIBGLADE_REQUIRED ++ libwnck-1.0 >= \$LIBWNCK_REQUIRED ++ gtk+-2.0 >= \$GTK_REQUIRED ++ gnome-keyring-1 >= \$GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= \$LIBPANEL_REQUIRED ++ cairo >= \$CAIRO_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED") 2>&5 + ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- ac_cv_func_bind_textdomain_codeset=yes ++ (exit $ac_status); }; then ++ pkg_cv_GNOME_LIBS=`$PKG_CONFIG --libs " ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED" 2>/dev/null` + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_func_bind_textdomain_codeset=no +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++ pkg_failed=yes + fi +-{ echo "$as_me:$LINENO: result: $ac_cv_func_bind_textdomain_codeset" >&5 +-echo "${ECHO_T}$ac_cv_func_bind_textdomain_codeset" >&6; } +-if test $ac_cv_func_bind_textdomain_codeset = yes; then +- CATOBJEXT=.gmo +- DATADIRNAME=share ++ fi + else +- CATOBJEXT=.mo +- DATADIRNAME=lib +-fi +- +- ;; +- *) +- CATOBJEXT=.mo +- DATADIRNAME=lib +- ;; +- esac +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +- LIBS="$glib_save_LIBS" +- INSTOBJEXT=.mo +- else +- gt_cv_have_gettext=no +- fi +- fi +- ++ pkg_failed=untried + fi + + + +- if test "$gt_cv_have_gettext" = "yes" ; then +- +-cat >>confdefs.h <<\_ACEOF +-#define ENABLE_NLS 1 +-_ACEOF +- +- fi +- +- if test "$XGETTEXT" != ":"; then +- if $XGETTEXT --omit-header /dev/null 2> /dev/null; then +- : ; +- else +- { echo "$as_me:$LINENO: result: found xgettext program is not GNU xgettext; ignore it" >&5 +-echo "${ECHO_T}found xgettext program is not GNU xgettext; ignore it" >&6; } +- XGETTEXT=":" +- fi +- fi +- +- # We need to process the po/ directory. +- POSUB=po +- +- ac_config_commands="$ac_config_commands default-1" +- +- +- for lang in $ALL_LINGUAS; do +- GMOFILES="$GMOFILES $lang.gmo" +- POFILES="$POFILES $lang.po" +- done +- +- ++if test $pkg_failed = yes; then + ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ GNOME_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors " ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED"` ++ else ++ GNOME_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors " ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$GNOME_PKG_ERRORS" >&5 + ++ { { echo "$as_me:$LINENO: error: Package requirements ( ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED) were not met: + ++$GNOME_PKG_ERRORS + ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + ++Alternatively, you may set the environment variables GNOME_CFLAGS ++and GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements ( ++ libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED ++ libglade-2.0 >= $LIBGLADE_REQUIRED ++ libwnck-1.0 >= $LIBWNCK_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED ++ libpanelapplet-2.0 >= $LIBPANEL_REQUIRED ++ cairo >= $CAIRO_REQUIRED) were not met: + ++$GNOME_PKG_ERRORS + ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + ++Alternatively, you may set the environment variables GNOME_CFLAGS ++and GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. + ++Alternatively, you may set the environment variables GNOME_CFLAGS ++and GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. + ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. + +- if test "$gt_cv_have_gettext" = "yes"; then +- if test "x$ALL_LINGUAS" = "x"; then +- LINGUAS= +- else +- { echo "$as_me:$LINENO: checking for catalogs to be installed" >&5 +-echo $ECHO_N "checking for catalogs to be installed... $ECHO_C" >&6; } +- NEW_LINGUAS= +- for presentlang in $ALL_LINGUAS; do +- useit=no +- if test "%UNSET%" != "${LINGUAS-%UNSET%}"; then +- desiredlanguages="$LINGUAS" +- else +- desiredlanguages="$ALL_LINGUAS" +- fi +- for desiredlang in $desiredlanguages; do +- # Use the presentlang catalog if desiredlang is +- # a. equal to presentlang, or +- # b. a variant of presentlang (because in this case, +- # presentlang can be used as a fallback for messages +- # which are not translated in the desiredlang catalog). +- case "$desiredlang" in +- "$presentlang"*) useit=yes;; +- esac +- done +- if test $useit = yes; then +- NEW_LINGUAS="$NEW_LINGUAS $presentlang" +- fi +- done +- LINGUAS=$NEW_LINGUAS +- { echo "$as_me:$LINENO: result: $LINGUAS" >&5 +-echo "${ECHO_T}$LINGUAS" >&6; } +- fi ++Alternatively, you may set the environment variables GNOME_CFLAGS ++and GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. + +- if test -n "$LINGUAS"; then +- for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done +- fi +- fi ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ GNOME_CFLAGS=$pkg_cv_GNOME_CFLAGS ++ GNOME_LIBS=$pkg_cv_GNOME_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi + +- MKINSTALLDIRS= +- if test -n "$ac_aux_dir"; then +- MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" +- fi +- if test -z "$MKINSTALLDIRS"; then +- MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" +- fi + + +- test -d po || mkdir po +- if test "x$srcdir" != "x."; then +- if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then +- posrcprefix="$srcdir/" +- else +- posrcprefix="../$srcdir/" +- fi +- else +- posrcprefix="../" +- fi +- rm -f po/POTFILES +- sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ +- < $srcdir/po/POTFILES.in > po/POTFILES + ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for GDK" >&5 ++echo $ECHO_N "checking for GDK... $ECHO_C" >&6; } + +-GLIB_REQUIRED=2.13.0 +-GTK_REQUIRED=2.11.0 +-GDK_REQUIRED=2.11.0 +-GNOME_KEYRING_REQUIRED=0.6.0 +-LIBGNOME_REQUIRED=2.14.0 +-LIBGNOMEUI_REQUIRED=2.14.0 +-HAL_REQUIRED=0.5.8 +-DBUS_REQUIRED=0.70 +-LIBGLADE_REQUIRED=2.5.0 +-LIBNOTIFY_REQUIRED=0.4.3 +-LIBWNCK_REQUIRED=2.10.0 +-CAIRO_REQUIRED=1.0.0 +-UNIQUE_REQUIRED=0.9.4 +-LIBPANEL_REQUIRED=2.0.0 +-GSTREAMER_REQUIRED=0.10 +-XRANDR_REQUIRED=1.2.0 +-POLKIT_GNOME_REQUIRED=0.8 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GDK_CFLAGS"; then ++ pkg_cv_GDK_CFLAGS="$GDK_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ gdk-2.0 >= \$GDK_REQUIRED ++ gdk-x11-2.0 >= \$GDK_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GDK_CFLAGS=`$PKG_CONFIG --cflags " ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GDK_LIBS"; then ++ pkg_cv_GDK_LIBS="$GDK_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ gdk-2.0 >= \$GDK_REQUIRED ++ gdk-x11-2.0 >= \$GDK_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GDK_LIBS=`$PKG_CONFIG --libs " ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi + + + ++if test $pkg_failed = yes; then + ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ GDK_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors " ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED"` ++ else ++ GDK_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors " ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$GDK_PKG_ERRORS" >&5 + ++ { { echo "$as_me:$LINENO: error: Package requirements ( ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED) were not met: + ++$GDK_PKG_ERRORS + ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + ++Alternatively, you may set the environment variables GDK_CFLAGS ++and GDK_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements ( ++ gdk-2.0 >= $GDK_REQUIRED ++ gdk-x11-2.0 >= $GDK_REQUIRED) were not met: + ++$GDK_PKG_ERRORS + ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + ++Alternatively, you may set the environment variables GDK_CFLAGS ++and GDK_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. + ++Alternatively, you may set the environment variables GDK_CFLAGS ++and GDK_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. + ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. + ++Alternatively, you may set the environment variables GDK_CFLAGS ++and GDK_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. + ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ GDK_CFLAGS=$pkg_cv_GDK_CFLAGS ++ GDK_LIBS=$pkg_cv_GDK_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi + + + + + pkg_failed=no +-{ echo "$as_me:$LINENO: checking for GLIB" >&5 +-echo $ECHO_N "checking for GLIB... $ECHO_C" >&6; } ++{ echo "$as_me:$LINENO: checking for XRANDR" >&5 ++echo $ECHO_N "checking for XRANDR... $ECHO_C" >&6; } + +-if test -n "$GLIB_CFLAGS"; then +- pkg_cv_GLIB_CFLAGS="$GLIB_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED gobject-2.0\"") >&5 +- ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED gobject-2.0") 2>&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$XRANDR_CFLAGS"; then ++ pkg_cv_XRANDR_CFLAGS="$XRANDR_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ xrandr >= \$XRANDR_REQUIRED ++ xrender x11\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +- pkg_cv_GLIB_CFLAGS=`$PKG_CONFIG --cflags "glib-2.0 >= $GLIB_REQUIRED gobject-2.0" 2>/dev/null` ++ pkg_cv_XRANDR_CFLAGS=`$PKG_CONFIG --cflags " ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi +-if test -n "$GLIB_LIBS"; then +- pkg_cv_GLIB_LIBS="$GLIB_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED gobject-2.0\"") >&5 +- ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED gobject-2.0") 2>&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$XRANDR_LIBS"; then ++ pkg_cv_XRANDR_LIBS="$XRANDR_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ xrandr >= \$XRANDR_REQUIRED ++ xrender x11\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +- pkg_cv_GLIB_LIBS=`$PKG_CONFIG --libs "glib-2.0 >= $GLIB_REQUIRED gobject-2.0" 2>/dev/null` ++ pkg_cv_XRANDR_LIBS=`$PKG_CONFIG --libs " ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ XRANDR_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors " ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11"` ++ else ++ XRANDR_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors " ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$XRANDR_PKG_ERRORS" >&5 ++ ++ { { echo "$as_me:$LINENO: error: Package requirements ( ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11) were not met: ++ ++$XRANDR_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables XRANDR_CFLAGS ++and XRANDR_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements ( ++ xrandr >= $XRANDR_REQUIRED ++ xrender x11) were not met: ++ ++$XRANDR_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables XRANDR_CFLAGS ++and XRANDR_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables XRANDR_CFLAGS ++and XRANDR_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables XRANDR_CFLAGS ++and XRANDR_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ XRANDR_CFLAGS=$pkg_cv_XRANDR_CFLAGS ++ XRANDR_LIBS=$pkg_cv_XRANDR_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi ++ ++ ++ ++# Extract the first word of "gconftool-2", so it can be a program name with args. ++set dummy gconftool-2; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_GCONFTOOL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $GCONFTOOL in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_GCONFTOOL="$GCONFTOOL" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_GCONFTOOL="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++GCONFTOOL=$ac_cv_path_GCONFTOOL ++if test -n "$GCONFTOOL"; then ++ { echo "$as_me:$LINENO: result: $GCONFTOOL" >&5 ++echo "${ECHO_T}$GCONFTOOL" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ ++ if test "x$GCONF_SCHEMA_INSTALL_SOURCE" = "x"; then ++ GCONF_SCHEMA_CONFIG_SOURCE=`gconftool-2 --get-default-source` ++ else ++ GCONF_SCHEMA_CONFIG_SOURCE=$GCONF_SCHEMA_INSTALL_SOURCE ++ fi ++ ++ ++# Check whether --with-gconf-source was given. ++if test "${with_gconf_source+set}" = set; then ++ withval=$with_gconf_source; GCONF_SCHEMA_CONFIG_SOURCE="$withval" + fi + + + +-if test $pkg_failed = yes; then ++ { echo "$as_me:$LINENO: result: Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation" >&5 ++echo "${ECHO_T}Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation" >&6; } ++ ++ if test "x$GCONF_SCHEMA_FILE_DIR" = "x"; then ++ GCONF_SCHEMA_FILE_DIR='$(sysconfdir)/gconf/schemas' ++ fi ++ + +-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then +- _pkg_short_errors_supported=yes +-else +- _pkg_short_errors_supported=no ++# Check whether --with-gconf-schema-file-dir was given. ++if test "${with_gconf_schema_file_dir+set}" = set; then ++ withval=$with_gconf_schema_file_dir; GCONF_SCHEMA_FILE_DIR="$withval" + fi +- if test $_pkg_short_errors_supported = yes; then +- GLIB_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "glib-2.0 >= $GLIB_REQUIRED gobject-2.0" 2>&1` +- else +- GLIB_PKG_ERRORS=`$PKG_CONFIG --print-errors "glib-2.0 >= $GLIB_REQUIRED gobject-2.0" 2>&1` +- fi +- # Put the nasty error message in config.log where it belongs +- echo "$GLIB_PKG_ERRORS" >&5 + +- { { echo "$as_me:$LINENO: error: Package requirements (glib-2.0 >= $GLIB_REQUIRED gobject-2.0) were not met: + +-$GLIB_PKG_ERRORS + +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. ++ { echo "$as_me:$LINENO: result: Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files" >&5 ++echo "${ECHO_T}Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files" >&6; } + +-Alternatively, you may set the environment variables GLIB_CFLAGS +-and GLIB_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&5 +-echo "$as_me: error: Package requirements (glib-2.0 >= $GLIB_REQUIRED gobject-2.0) were not met: ++ # Check whether --enable-schemas-install was given. ++if test "${enable_schemas_install+set}" = set; then ++ enableval=$enable_schemas_install; case ${enableval} in ++ yes|no) ;; ++ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-schemas-install" >&5 ++echo "$as_me: error: bad value ${enableval} for --enable-schemas-install" >&2;} ++ { (exit 1); exit 1; }; } ;; ++ esac ++fi + +-$GLIB_PKG_ERRORS + +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. + +-Alternatively, you may set the environment variables GLIB_CFLAGS +-and GLIB_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&2;} +- { (exit 1); exit 1; }; } +-elif test $pkg_failed = untried; then +- { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. ++if test "$enable_schemas_install" != no; then ++ GCONF_SCHEMAS_INSTALL_TRUE= ++ GCONF_SCHEMAS_INSTALL_FALSE='#' ++else ++ GCONF_SCHEMAS_INSTALL_TRUE='#' ++ GCONF_SCHEMAS_INSTALL_FALSE= ++fi + +-Alternatively, you may set the environment variables GLIB_CFLAGS +-and GLIB_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. + +-To get pkg-config, see . +-See \`config.log' for more details." >&5 +-echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. + +-Alternatively, you may set the environment variables GLIB_CFLAGS +-and GLIB_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. ++{ echo "$as_me:$LINENO: checking for X" >&5 ++echo $ECHO_N "checking for X... $ECHO_C" >&6; } + +-To get pkg-config, see . +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } ++ ++# Check whether --with-x was given. ++if test "${with_x+set}" = set; then ++ withval=$with_x; ++fi ++ ++# $have_x is `yes', `no', `disabled', or empty when we do not yet know. ++if test "x$with_x" = xno; then ++ # The user explicitly disabled X. ++ have_x=disabled + else +- GLIB_CFLAGS=$pkg_cv_GLIB_CFLAGS +- GLIB_LIBS=$pkg_cv_GLIB_LIBS +- { echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6; } +- : ++ case $x_includes,$x_libraries in #( ++ *\'*) { { echo "$as_me:$LINENO: error: Cannot use X directory names containing '" >&5 ++echo "$as_me: error: Cannot use X directory names containing '" >&2;} ++ { (exit 1); exit 1; }; };; #( ++ *,NONE | NONE,*) if test "${ac_cv_have_x+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ # One or both of the vars are not set, and there is no cached value. ++ac_x_includes=no ac_x_libraries=no ++rm -f -r conftest.dir ++if mkdir conftest.dir; then ++ cd conftest.dir ++ cat >Imakefile <<'_ACEOF' ++incroot: ++ @echo incroot='${INCROOT}' ++usrlibdir: ++ @echo usrlibdir='${USRLIBDIR}' ++libdir: ++ @echo libdir='${LIBDIR}' ++_ACEOF ++ if (export CC; ${XMKMF-xmkmf}) >/dev/null 2>/dev/null && test -f Makefile; then ++ # GNU make sometimes prints "make[1]: Entering...", which would confuse us. ++ for ac_var in incroot usrlibdir libdir; do ++ eval "ac_im_$ac_var=\`\${MAKE-make} $ac_var 2>/dev/null | sed -n 's/^$ac_var=//p'\`" ++ done ++ # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. ++ for ac_extension in a so sl; do ++ if test ! -f "$ac_im_usrlibdir/libX11.$ac_extension" && ++ test -f "$ac_im_libdir/libX11.$ac_extension"; then ++ ac_im_usrlibdir=$ac_im_libdir; break ++ fi ++ done ++ # Screen out bogus values from the imake configuration. They are ++ # bogus both because they are the default anyway, and because ++ # using them would break gcc on systems where it needs fixed includes. ++ case $ac_im_incroot in ++ /usr/include) ac_x_includes= ;; ++ *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;; ++ esac ++ case $ac_im_usrlibdir in ++ /usr/lib | /lib) ;; ++ *) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;; ++ esac ++ fi ++ cd .. ++ rm -f -r conftest.dir + fi + ++# Standard set of common directories for X headers. ++# Check X11 before X11Rn because it is often a symlink to the current release. ++ac_x_header_dirs=' ++/usr/X11/include ++/usr/X11R6/include ++/usr/X11R5/include ++/usr/X11R4/include + ++/usr/include/X11 ++/usr/include/X11R6 ++/usr/include/X11R5 ++/usr/include/X11R4 + ++/usr/local/X11/include ++/usr/local/X11R6/include ++/usr/local/X11R5/include ++/usr/local/X11R4/include + +-pkg_failed=no +-{ echo "$as_me:$LINENO: checking for HAL" >&5 +-echo $ECHO_N "checking for HAL... $ECHO_C" >&6; } ++/usr/local/include/X11 ++/usr/local/include/X11R6 ++/usr/local/include/X11R5 ++/usr/local/include/X11R4 + +-if test -n "$HAL_CFLAGS"; then +- pkg_cv_HAL_CFLAGS="$HAL_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"hal >= \$HAL_REQUIRED\"") >&5 +- ($PKG_CONFIG --exists --print-errors "hal >= $HAL_REQUIRED") 2>&5 ++/usr/X386/include ++/usr/x386/include ++/usr/XFree86/include/X11 ++ ++/usr/include ++/usr/local/include ++/usr/unsupported/include ++/usr/athena/include ++/usr/local/x11r5/include ++/usr/lpp/Xamples/include ++ ++/usr/openwin/include ++/usr/openwin/share/include' ++ ++if test "$ac_x_includes" = no; then ++ # Guess where to find include files, by looking for Xlib.h. ++ # First, try using that file with no special directory specified. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_HAL_CFLAGS=`$PKG_CONFIG --cflags "hal >= $HAL_REQUIRED" 2>/dev/null` ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ # We can compile using X headers with no special include directory. ++ac_x_includes= + else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ for ac_dir in $ac_x_header_dirs; do ++ if test -r "$ac_dir/X11/Xlib.h"; then ++ ac_x_includes=$ac_dir ++ break ++ fi ++done + fi +-if test -n "$HAL_LIBS"; then +- pkg_cv_HAL_LIBS="$HAL_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"hal >= \$HAL_REQUIRED\"") >&5 +- ($PKG_CONFIG --exists --print-errors "hal >= $HAL_REQUIRED") 2>&5 ++ ++rm -f conftest.err conftest.$ac_ext ++fi # $ac_x_includes = no ++ ++if test "$ac_x_libraries" = no; then ++ # Check for the libraries. ++ # See if we find them without any special options. ++ # Don't add to $LIBS permanently. ++ ac_save_LIBS=$LIBS ++ LIBS="-lX11 $LIBS" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++int ++main () ++{ ++XrmInitialize () ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_HAL_LIBS=`$PKG_CONFIG --libs "hal >= $HAL_REQUIRED" 2>/dev/null` ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ LIBS=$ac_save_LIBS ++# We can link X programs with no special library path. ++ac_x_libraries= + else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried +-fi ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + ++ LIBS=$ac_save_LIBS ++for ac_dir in `echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g` ++do ++ # Don't even attempt the hair of trying to link an X program! ++ for ac_extension in a so sl; do ++ if test -r "$ac_dir/libX11.$ac_extension"; then ++ ac_x_libraries=$ac_dir ++ break 2 ++ fi ++ done ++done ++fi + ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi # $ac_x_libraries = no + +-if test $pkg_failed = yes; then ++case $ac_x_includes,$ac_x_libraries in #( ++ no,* | *,no | *\'*) ++ # Didn't find X, or a directory has "'" in its name. ++ ac_cv_have_x="have_x=no";; #( ++ *) ++ # Record where we found X for the cache. ++ ac_cv_have_x="have_x=yes\ ++ ac_x_includes='$ac_x_includes'\ ++ ac_x_libraries='$ac_x_libraries'" ++esac ++fi ++;; #( ++ *) have_x=yes;; ++ esac ++ eval "$ac_cv_have_x" ++fi # $with_x != no + +-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then +- _pkg_short_errors_supported=yes ++if test "$have_x" != yes; then ++ { echo "$as_me:$LINENO: result: $have_x" >&5 ++echo "${ECHO_T}$have_x" >&6; } ++ no_x=yes + else +- _pkg_short_errors_supported=no ++ # If each of the values was on the command line, it overrides each guess. ++ test "x$x_includes" = xNONE && x_includes=$ac_x_includes ++ test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries ++ # Update the cache value to reflect the command line values. ++ ac_cv_have_x="have_x=yes\ ++ ac_x_includes='$x_includes'\ ++ ac_x_libraries='$x_libraries'" ++ { echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5 ++echo "${ECHO_T}libraries $x_libraries, headers $x_includes" >&6; } + fi +- if test $_pkg_short_errors_supported = yes; then +- HAL_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "hal >= $HAL_REQUIRED" 2>&1` +- else +- HAL_PKG_ERRORS=`$PKG_CONFIG --print-errors "hal >= $HAL_REQUIRED" 2>&1` +- fi +- # Put the nasty error message in config.log where it belongs +- echo "$HAL_PKG_ERRORS" >&5 + +- { { echo "$as_me:$LINENO: error: Package requirements (hal >= $HAL_REQUIRED) were not met: ++if test "$no_x" = yes; then ++ # Not all programs may use this symbol, but it does not hurt to define it. + +-$HAL_PKG_ERRORS ++cat >>confdefs.h <<\_ACEOF ++#define X_DISPLAY_MISSING 1 ++_ACEOF + +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. ++ X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS= ++else ++ if test -n "$x_includes"; then ++ X_CFLAGS="$X_CFLAGS -I$x_includes" ++ fi + +-Alternatively, you may set the environment variables HAL_CFLAGS +-and HAL_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&5 +-echo "$as_me: error: Package requirements (hal >= $HAL_REQUIRED) were not met: ++ # It would also be nice to do this for all -L options, not just this one. ++ if test -n "$x_libraries"; then ++ X_LIBS="$X_LIBS -L$x_libraries" ++ # For Solaris; some versions of Sun CC require a space after -R and ++ # others require no space. Words are not sufficient . . . . ++ { echo "$as_me:$LINENO: checking whether -R must be followed by a space" >&5 ++echo $ECHO_N "checking whether -R must be followed by a space... $ECHO_C" >&6; } ++ ac_xsave_LIBS=$LIBS; LIBS="$LIBS -R$x_libraries" ++ ac_xsave_c_werror_flag=$ac_c_werror_flag ++ ac_c_werror_flag=yes ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +-$HAL_PKG_ERRORS ++int ++main () ++{ + +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ X_LIBS="$X_LIBS -R$x_libraries" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-Alternatively, you may set the environment variables HAL_CFLAGS +-and HAL_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&2;} +- { (exit 1); exit 1; }; } +-elif test $pkg_failed = untried; then +- { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. ++ LIBS="$ac_xsave_LIBS -R $x_libraries" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +-Alternatively, you may set the environment variables HAL_CFLAGS +-and HAL_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. ++int ++main () ++{ + +-To get pkg-config, see . +-See \`config.log' for more details." >&5 +-echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ X_LIBS="$X_LIBS -R $x_libraries" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-Alternatively, you may set the environment variables HAL_CFLAGS +-and HAL_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. ++ { echo "$as_me:$LINENO: result: neither works" >&5 ++echo "${ECHO_T}neither works" >&6; } ++fi + +-To get pkg-config, see . +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-else +- HAL_CFLAGS=$pkg_cv_HAL_CFLAGS +- HAL_LIBS=$pkg_cv_HAL_LIBS +- { echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6; } +- : ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext + fi + ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ ac_c_werror_flag=$ac_xsave_c_werror_flag ++ LIBS=$ac_xsave_LIBS ++ fi ++ ++ # Check for system-dependent libraries X programs must link with. ++ # Do this before checking for the system-independent R6 libraries ++ # (-lICE), since we may need -lsocket or whatever for X linking. + ++ if test "$ISC" = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet" ++ else ++ # Martyn Johnson says this is needed for Ultrix, if the X ++ # libraries were built with DECnet support. And Karl Berry says ++ # the Alpha needs dnet_stub (dnet does not exist). ++ ac_xsave_LIBS="$LIBS"; LIBS="$LIBS $X_LIBS -lX11" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char XOpenDisplay (); ++int ++main () ++{ ++return XOpenDisplay (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ : ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-pkg_failed=no +-{ echo "$as_me:$LINENO: checking for GSTREAMER" >&5 +-echo $ECHO_N "checking for GSTREAMER... $ECHO_C" >&6; } ++ { echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet" >&5 ++echo $ECHO_N "checking for dnet_ntoa in -ldnet... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dnet_dnet_ntoa+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldnet $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +-if test -n "$GSTREAMER_CFLAGS"; then +- pkg_cv_GSTREAMER_CFLAGS="$GSTREAMER_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gstreamer-0.10 >= \$GSTREAMER_REQUIRED\"") >&5 +- ($PKG_CONFIG --exists --print-errors "gstreamer-0.10 >= $GSTREAMER_REQUIRED") 2>&5 ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dnet_ntoa (); ++int ++main () ++{ ++return dnet_ntoa (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_GSTREAMER_CFLAGS=`$PKG_CONFIG --cflags "gstreamer-0.10 >= $GSTREAMER_REQUIRED" 2>/dev/null` ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dnet_dnet_ntoa=yes + else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_dnet_dnet_ntoa=no + fi +-if test -n "$GSTREAMER_LIBS"; then +- pkg_cv_GSTREAMER_LIBS="$GSTREAMER_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gstreamer-0.10 >= \$GSTREAMER_REQUIRED\"") >&5 +- ($PKG_CONFIG --exists --print-errors "gstreamer-0.10 >= $GSTREAMER_REQUIRED") 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_GSTREAMER_LIBS=`$PKG_CONFIG --libs "gstreamer-0.10 >= $GSTREAMER_REQUIRED" 2>/dev/null` +-else +- pkg_failed=yes ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS + fi +- else +- pkg_failed=untried ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_dnet_ntoa" >&5 ++echo "${ECHO_T}$ac_cv_lib_dnet_dnet_ntoa" >&6; } ++if test $ac_cv_lib_dnet_dnet_ntoa = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet" + fi + +- +- +-if test $pkg_failed = yes; then +- +-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then +- _pkg_short_errors_supported=yes ++ if test $ac_cv_lib_dnet_dnet_ntoa = no; then ++ { echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet_stub" >&5 ++echo $ECHO_N "checking for dnet_ntoa in -ldnet_stub... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dnet_stub_dnet_ntoa+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- _pkg_short_errors_supported=no +-fi +- if test $_pkg_short_errors_supported = yes; then +- GSTREAMER_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "gstreamer-0.10 >= $GSTREAMER_REQUIRED" 2>&1` +- else +- GSTREAMER_PKG_ERRORS=`$PKG_CONFIG --print-errors "gstreamer-0.10 >= $GSTREAMER_REQUIRED" 2>&1` +- fi +- # Put the nasty error message in config.log where it belongs +- echo "$GSTREAMER_PKG_ERRORS" >&5 ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldnet_stub $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +- { { echo "$as_me:$LINENO: error: Package requirements (gstreamer-0.10 >= $GSTREAMER_REQUIRED) were not met: ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dnet_ntoa (); ++int ++main () ++{ ++return dnet_ntoa (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dnet_stub_dnet_ntoa=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-$GSTREAMER_PKG_ERRORS ++ ac_cv_lib_dnet_stub_dnet_ntoa=no ++fi + +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5 ++echo "${ECHO_T}$ac_cv_lib_dnet_stub_dnet_ntoa" >&6; } ++if test $ac_cv_lib_dnet_stub_dnet_ntoa = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub" ++fi + +-Alternatively, you may set the environment variables GSTREAMER_CFLAGS +-and GSTREAMER_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&5 +-echo "$as_me: error: Package requirements (gstreamer-0.10 >= $GSTREAMER_REQUIRED) were not met: ++ fi ++fi + +-$GSTREAMER_PKG_ERRORS ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ LIBS="$ac_xsave_LIBS" + +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. ++ # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT, ++ # to get the SysV transport functions. ++ # Chad R. Larson says the Pyramis MIS-ES running DC/OSx (SVR4) ++ # needs -lnsl. ++ # The nsl library prevents programs from opening the X display ++ # on Irix 5.2, according to T.E. Dickey. ++ # The functions gethostbyname, getservbyname, and inet_addr are ++ # in -lbsd on LynxOS 3.0.1/i386, according to Lars Hecking. ++ { echo "$as_me:$LINENO: checking for gethostbyname" >&5 ++echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6; } ++if test "${ac_cv_func_gethostbyname+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define gethostbyname to an innocuous variant, in case declares gethostbyname. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define gethostbyname innocuous_gethostbyname + +-Alternatively, you may set the environment variables GSTREAMER_CFLAGS +-and GSTREAMER_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&2;} +- { (exit 1); exit 1; }; } +-elif test $pkg_failed = untried; then +- { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char gethostbyname (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ + +-Alternatively, you may set the environment variables GSTREAMER_CFLAGS +-and GSTREAMER_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif + +-To get pkg-config, see . +-See \`config.log' for more details." >&5 +-echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. ++#undef gethostbyname + +-Alternatively, you may set the environment variables GSTREAMER_CFLAGS +-and GSTREAMER_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char gethostbyname (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_gethostbyname || defined __stub___gethostbyname ++choke me ++#endif + +-To get pkg-config, see . +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } ++int ++main () ++{ ++return gethostbyname (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_gethostbyname=yes + else +- GSTREAMER_CFLAGS=$pkg_cv_GSTREAMER_CFLAGS +- GSTREAMER_LIBS=$pkg_cv_GSTREAMER_LIBS +- { echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6; } +- : +-fi +- ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + ++ ac_cv_func_gethostbyname=no ++fi + ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5 ++echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6; } + +-pkg_failed=no +-{ echo "$as_me:$LINENO: checking for DBUS" >&5 +-echo $ECHO_N "checking for DBUS... $ECHO_C" >&6; } ++ if test $ac_cv_func_gethostbyname = no; then ++ { echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 ++echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lnsl $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +-if test -n "$DBUS_CFLAGS"; then +- pkg_cv_DBUS_CFLAGS="$DBUS_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" +- dbus-glib-1 >= \$DBUS_REQUIRED +- dbus-1 >= \$DBUS_REQUIRED +- gthread-2.0\"") >&5 +- ($PKG_CONFIG --exists --print-errors " +- dbus-glib-1 >= $DBUS_REQUIRED +- dbus-1 >= $DBUS_REQUIRED +- gthread-2.0") 2>&5 ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char gethostbyname (); ++int ++main () ++{ ++return gethostbyname (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_DBUS_CFLAGS=`$PKG_CONFIG --cflags " +- dbus-glib-1 >= $DBUS_REQUIRED +- dbus-1 >= $DBUS_REQUIRED +- gthread-2.0" 2>/dev/null` ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_nsl_gethostbyname=yes + else +- pkg_failed=yes ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_nsl_gethostbyname=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS + fi +- else +- pkg_failed=untried ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5 ++echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6; } ++if test $ac_cv_lib_nsl_gethostbyname = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl" + fi +-if test -n "$DBUS_LIBS"; then +- pkg_cv_DBUS_LIBS="$DBUS_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" +- dbus-glib-1 >= \$DBUS_REQUIRED +- dbus-1 >= \$DBUS_REQUIRED +- gthread-2.0\"") >&5 +- ($PKG_CONFIG --exists --print-errors " +- dbus-glib-1 >= $DBUS_REQUIRED +- dbus-1 >= $DBUS_REQUIRED +- gthread-2.0") 2>&5 ++ ++ if test $ac_cv_lib_nsl_gethostbyname = no; then ++ { echo "$as_me:$LINENO: checking for gethostbyname in -lbsd" >&5 ++echo $ECHO_N "checking for gethostbyname in -lbsd... $ECHO_C" >&6; } ++if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lbsd $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char gethostbyname (); ++int ++main () ++{ ++return gethostbyname (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_DBUS_LIBS=`$PKG_CONFIG --libs " +- dbus-glib-1 >= $DBUS_REQUIRED +- dbus-1 >= $DBUS_REQUIRED +- gthread-2.0" 2>/dev/null` ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_bsd_gethostbyname=yes + else +- pkg_failed=yes ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_bsd_gethostbyname=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS + fi +- else +- pkg_failed=untried ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_gethostbyname" >&5 ++echo "${ECHO_T}$ac_cv_lib_bsd_gethostbyname" >&6; } ++if test $ac_cv_lib_bsd_gethostbyname = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -lbsd" + fi + ++ fi ++ fi + ++ # lieder@skyler.mavd.honeywell.com says without -lsocket, ++ # socket/setsockopt and other routines are undefined under SCO ODT ++ # 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary ++ # on later versions), says Simon Leinen: it contains gethostby* ++ # variants that don't use the name server (or something). -lsocket ++ # must be given before -lnsl if both are needed. We assume that ++ # if connect needs -lnsl, so does gethostbyname. ++ { echo "$as_me:$LINENO: checking for connect" >&5 ++echo $ECHO_N "checking for connect... $ECHO_C" >&6; } ++if test "${ac_cv_func_connect+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define connect to an innocuous variant, in case declares connect. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define connect innocuous_connect + +-if test $pkg_failed = yes; then ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char connect (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ + +-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then +- _pkg_short_errors_supported=yes +-else +- _pkg_short_errors_supported=no +-fi +- if test $_pkg_short_errors_supported = yes; then +- DBUS_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors " +- dbus-glib-1 >= $DBUS_REQUIRED +- dbus-1 >= $DBUS_REQUIRED +- gthread-2.0" 2>&1` +- else +- DBUS_PKG_ERRORS=`$PKG_CONFIG --print-errors " +- dbus-glib-1 >= $DBUS_REQUIRED +- dbus-1 >= $DBUS_REQUIRED +- gthread-2.0" 2>&1` +- fi +- # Put the nasty error message in config.log where it belongs +- echo "$DBUS_PKG_ERRORS" >&5 ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif + +- { { echo "$as_me:$LINENO: error: Package requirements ( +- dbus-glib-1 >= $DBUS_REQUIRED +- dbus-1 >= $DBUS_REQUIRED +- gthread-2.0) were not met: ++#undef connect + +-$DBUS_PKG_ERRORS ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char connect (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_connect || defined __stub___connect ++choke me ++#endif + +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. ++int ++main () ++{ ++return connect (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_connect=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-Alternatively, you may set the environment variables DBUS_CFLAGS +-and DBUS_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&5 +-echo "$as_me: error: Package requirements ( +- dbus-glib-1 >= $DBUS_REQUIRED +- dbus-1 >= $DBUS_REQUIRED +- gthread-2.0) were not met: ++ ac_cv_func_connect=no ++fi + +-$DBUS_PKG_ERRORS ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5 ++echo "${ECHO_T}$ac_cv_func_connect" >&6; } + +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. ++ if test $ac_cv_func_connect = no; then ++ { echo "$as_me:$LINENO: checking for connect in -lsocket" >&5 ++echo $ECHO_N "checking for connect in -lsocket... $ECHO_C" >&6; } ++if test "${ac_cv_lib_socket_connect+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lsocket $X_EXTRA_LIBS $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +-Alternatively, you may set the environment variables DBUS_CFLAGS +-and DBUS_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&2;} +- { (exit 1); exit 1; }; } +-elif test $pkg_failed = untried; then +- { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char connect (); ++int ++main () ++{ ++return connect (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_socket_connect=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-Alternatively, you may set the environment variables DBUS_CFLAGS +-and DBUS_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. ++ ac_cv_lib_socket_connect=no ++fi + +-To get pkg-config, see . +-See \`config.log' for more details." >&5 +-echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_socket_connect" >&5 ++echo "${ECHO_T}$ac_cv_lib_socket_connect" >&6; } ++if test $ac_cv_lib_socket_connect = yes; then ++ X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS" ++fi + +-Alternatively, you may set the environment variables DBUS_CFLAGS +-and DBUS_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. ++ fi + +-To get pkg-config, see . +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } ++ # Guillermo Gomez says -lposix is necessary on A/UX. ++ { echo "$as_me:$LINENO: checking for remove" >&5 ++echo $ECHO_N "checking for remove... $ECHO_C" >&6; } ++if test "${ac_cv_func_remove+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- DBUS_CFLAGS=$pkg_cv_DBUS_CFLAGS +- DBUS_LIBS=$pkg_cv_DBUS_LIBS +- { echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6; } +- : +-fi ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define remove to an innocuous variant, in case declares remove. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define remove innocuous_remove + ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char remove (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ + ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif + ++#undef remove + +-pkg_failed=no +-{ echo "$as_me:$LINENO: checking for GNOME" >&5 +-echo $ECHO_N "checking for GNOME... $ECHO_C" >&6; } ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char remove (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_remove || defined __stub___remove ++choke me ++#endif + +-if test -n "$GNOME_CFLAGS"; then +- pkg_cv_GNOME_CFLAGS="$GNOME_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" +- libgnomeui-2.0 >= \$LIBGNOMEUI_REQUIRED +- libglade-2.0 >= \$LIBGLADE_REQUIRED +- libwnck-1.0 >= \$LIBWNCK_REQUIRED +- gtk+-2.0 >= \$GTK_REQUIRED +- gnome-keyring-1 >= \$GNOME_KEYRING_REQUIRED +- libpanelapplet-2.0 >= \$LIBPANEL_REQUIRED +- cairo >= \$CAIRO_REQUIRED\"") >&5 +- ($PKG_CONFIG --exists --print-errors " +- libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED +- libglade-2.0 >= $LIBGLADE_REQUIRED +- libwnck-1.0 >= $LIBWNCK_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED +- libpanelapplet-2.0 >= $LIBPANEL_REQUIRED +- cairo >= $CAIRO_REQUIRED") 2>&5 ++int ++main () ++{ ++return remove (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_GNOME_CFLAGS=`$PKG_CONFIG --cflags " +- libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED +- libglade-2.0 >= $LIBGLADE_REQUIRED +- libwnck-1.0 >= $LIBWNCK_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED +- libpanelapplet-2.0 >= $LIBPANEL_REQUIRED +- cairo >= $CAIRO_REQUIRED" 2>/dev/null` ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_remove=yes + else +- pkg_failed=yes ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_func_remove=no + fi +- else +- pkg_failed=untried ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext + fi +-if test -n "$GNOME_LIBS"; then +- pkg_cv_GNOME_LIBS="$GNOME_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" +- libgnomeui-2.0 >= \$LIBGNOMEUI_REQUIRED +- libglade-2.0 >= \$LIBGLADE_REQUIRED +- libwnck-1.0 >= \$LIBWNCK_REQUIRED +- gtk+-2.0 >= \$GTK_REQUIRED +- gnome-keyring-1 >= \$GNOME_KEYRING_REQUIRED +- libpanelapplet-2.0 >= \$LIBPANEL_REQUIRED +- cairo >= \$CAIRO_REQUIRED\"") >&5 +- ($PKG_CONFIG --exists --print-errors " +- libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED +- libglade-2.0 >= $LIBGLADE_REQUIRED +- libwnck-1.0 >= $LIBWNCK_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED +- libpanelapplet-2.0 >= $LIBPANEL_REQUIRED +- cairo >= $CAIRO_REQUIRED") 2>&5 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_remove" >&5 ++echo "${ECHO_T}$ac_cv_func_remove" >&6; } ++ ++ if test $ac_cv_func_remove = no; then ++ { echo "$as_me:$LINENO: checking for remove in -lposix" >&5 ++echo $ECHO_N "checking for remove in -lposix... $ECHO_C" >&6; } ++if test "${ac_cv_lib_posix_remove+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lposix $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char remove (); ++int ++main () ++{ ++return remove (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_GNOME_LIBS=`$PKG_CONFIG --libs " +- libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED +- libglade-2.0 >= $LIBGLADE_REQUIRED +- libwnck-1.0 >= $LIBWNCK_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED +- libpanelapplet-2.0 >= $LIBPANEL_REQUIRED +- cairo >= $CAIRO_REQUIRED" 2>/dev/null` ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_posix_remove=yes + else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried +-fi +- +- ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-if test $pkg_failed = yes; then ++ ac_cv_lib_posix_remove=no ++fi + +-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then +- _pkg_short_errors_supported=yes +-else +- _pkg_short_errors_supported=no ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_posix_remove" >&5 ++echo "${ECHO_T}$ac_cv_lib_posix_remove" >&6; } ++if test $ac_cv_lib_posix_remove = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix" + fi +- if test $_pkg_short_errors_supported = yes; then +- GNOME_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors " +- libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED +- libglade-2.0 >= $LIBGLADE_REQUIRED +- libwnck-1.0 >= $LIBWNCK_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED +- libpanelapplet-2.0 >= $LIBPANEL_REQUIRED +- cairo >= $CAIRO_REQUIRED" 2>&1` +- else +- GNOME_PKG_ERRORS=`$PKG_CONFIG --print-errors " +- libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED +- libglade-2.0 >= $LIBGLADE_REQUIRED +- libwnck-1.0 >= $LIBWNCK_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED +- libpanelapplet-2.0 >= $LIBPANEL_REQUIRED +- cairo >= $CAIRO_REQUIRED" 2>&1` +- fi +- # Put the nasty error message in config.log where it belongs +- echo "$GNOME_PKG_ERRORS" >&5 + +- { { echo "$as_me:$LINENO: error: Package requirements ( +- libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED +- libglade-2.0 >= $LIBGLADE_REQUIRED +- libwnck-1.0 >= $LIBWNCK_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED +- libpanelapplet-2.0 >= $LIBPANEL_REQUIRED +- cairo >= $CAIRO_REQUIRED) were not met: ++ fi + +-$GNOME_PKG_ERRORS ++ # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. ++ { echo "$as_me:$LINENO: checking for shmat" >&5 ++echo $ECHO_N "checking for shmat... $ECHO_C" >&6; } ++if test "${ac_cv_func_shmat+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define shmat to an innocuous variant, in case declares shmat. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define shmat innocuous_shmat + +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char shmat (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ + +-Alternatively, you may set the environment variables GNOME_CFLAGS +-and GNOME_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&5 +-echo "$as_me: error: Package requirements ( +- libgnomeui-2.0 >= $LIBGNOMEUI_REQUIRED +- libglade-2.0 >= $LIBGLADE_REQUIRED +- libwnck-1.0 >= $LIBWNCK_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- gnome-keyring-1 >= $GNOME_KEYRING_REQUIRED +- libpanelapplet-2.0 >= $LIBPANEL_REQUIRED +- cairo >= $CAIRO_REQUIRED) were not met: ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif + +-$GNOME_PKG_ERRORS ++#undef shmat + +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char shmat (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_shmat || defined __stub___shmat ++choke me ++#endif + +-Alternatively, you may set the environment variables GNOME_CFLAGS +-and GNOME_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&2;} +- { (exit 1); exit 1; }; } +-elif test $pkg_failed = untried; then +- { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. ++int ++main () ++{ ++return shmat (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_shmat=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-Alternatively, you may set the environment variables GNOME_CFLAGS +-and GNOME_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. ++ ac_cv_func_shmat=no ++fi + +-To get pkg-config, see . +-See \`config.log' for more details." >&5 +-echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_shmat" >&5 ++echo "${ECHO_T}$ac_cv_func_shmat" >&6; } + +-Alternatively, you may set the environment variables GNOME_CFLAGS +-and GNOME_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. ++ if test $ac_cv_func_shmat = no; then ++ { echo "$as_me:$LINENO: checking for shmat in -lipc" >&5 ++echo $ECHO_N "checking for shmat in -lipc... $ECHO_C" >&6; } ++if test "${ac_cv_lib_ipc_shmat+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lipc $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +-To get pkg-config, see . +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char shmat (); ++int ++main () ++{ ++return shmat (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_ipc_shmat=yes + else +- GNOME_CFLAGS=$pkg_cv_GNOME_CFLAGS +- GNOME_LIBS=$pkg_cv_GNOME_LIBS +- { echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6; } +- : +-fi ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + ++ ac_cv_lib_ipc_shmat=no ++fi + ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_ipc_shmat" >&5 ++echo "${ECHO_T}$ac_cv_lib_ipc_shmat" >&6; } ++if test $ac_cv_lib_ipc_shmat = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc" ++fi + ++ fi ++ fi + +-pkg_failed=no +-{ echo "$as_me:$LINENO: checking for GDK" >&5 +-echo $ECHO_N "checking for GDK... $ECHO_C" >&6; } ++ # Check for libraries that X11R6 Xt/Xaw programs need. ++ ac_save_LDFLAGS=$LDFLAGS ++ test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries" ++ # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to ++ # check for ICE first), but we must link in the order -lSM -lICE or ++ # we get undefined symbols. So assume we have SM if we have ICE. ++ # These have to be linked with before -lX11, unlike the other ++ # libraries we check for below, so use a different variable. ++ # John Interrante, Karl Berry ++ { echo "$as_me:$LINENO: checking for IceConnectionNumber in -lICE" >&5 ++echo $ECHO_N "checking for IceConnectionNumber in -lICE... $ECHO_C" >&6; } ++if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lICE $X_EXTRA_LIBS $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +-if test -n "$GDK_CFLAGS"; then +- pkg_cv_GDK_CFLAGS="$GDK_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" +- gdk-2.0 >= \$GDK_REQUIRED +- gdk-x11-2.0 >= \$GDK_REQUIRED\"") >&5 +- ($PKG_CONFIG --exists --print-errors " +- gdk-2.0 >= $GDK_REQUIRED +- gdk-x11-2.0 >= $GDK_REQUIRED") 2>&5 ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char IceConnectionNumber (); ++int ++main () ++{ ++return IceConnectionNumber (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_GDK_CFLAGS=`$PKG_CONFIG --cflags " +- gdk-2.0 >= $GDK_REQUIRED +- gdk-x11-2.0 >= $GDK_REQUIRED" 2>/dev/null` ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_ICE_IceConnectionNumber=yes + else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_ICE_IceConnectionNumber=no + fi +-if test -n "$GDK_LIBS"; then +- pkg_cv_GDK_LIBS="$GDK_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" +- gdk-2.0 >= \$GDK_REQUIRED +- gdk-x11-2.0 >= \$GDK_REQUIRED\"") >&5 +- ($PKG_CONFIG --exists --print-errors " +- gdk-2.0 >= $GDK_REQUIRED +- gdk-x11-2.0 >= $GDK_REQUIRED") 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_GDK_LIBS=`$PKG_CONFIG --libs " +- gdk-2.0 >= $GDK_REQUIRED +- gdk-x11-2.0 >= $GDK_REQUIRED" 2>/dev/null` +-else +- pkg_failed=yes ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS + fi +- else +- pkg_failed=untried ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5 ++echo "${ECHO_T}$ac_cv_lib_ICE_IceConnectionNumber" >&6; } ++if test $ac_cv_lib_ICE_IceConnectionNumber = yes; then ++ X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE" + fi + ++ LDFLAGS=$ac_save_LDFLAGS + +- +-if test $pkg_failed = yes; then +- +-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then +- _pkg_short_errors_supported=yes +-else +- _pkg_short_errors_supported=no + fi +- if test $_pkg_short_errors_supported = yes; then +- GDK_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors " +- gdk-2.0 >= $GDK_REQUIRED +- gdk-x11-2.0 >= $GDK_REQUIRED" 2>&1` +- else +- GDK_PKG_ERRORS=`$PKG_CONFIG --print-errors " +- gdk-2.0 >= $GDK_REQUIRED +- gdk-x11-2.0 >= $GDK_REQUIRED" 2>&1` +- fi +- # Put the nasty error message in config.log where it belongs +- echo "$GDK_PKG_ERRORS" >&5 + +- { { echo "$as_me:$LINENO: error: Package requirements ( +- gdk-2.0 >= $GDK_REQUIRED +- gdk-x11-2.0 >= $GDK_REQUIRED) were not met: + +-$GDK_PKG_ERRORS ++ALL_X_LIBS="$X_LIBS $X_PRE_LIBS -lX11 $X_EXTRA_LIBS" + +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. ++SYSCONFDIR=$sysconfdir + +-Alternatively, you may set the environment variables GDK_CFLAGS +-and GDK_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&5 +-echo "$as_me: error: Package requirements ( +- gdk-2.0 >= $GDK_REQUIRED +- gdk-x11-2.0 >= $GDK_REQUIRED) were not met: ++DATADIR=$datadir + +-$GDK_PKG_ERRORS ++BINDIR=$bindir + +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. ++SBINDIR=$sbindir + +-Alternatively, you may set the environment variables GDK_CFLAGS +-and GDK_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&2;} +- { (exit 1); exit 1; }; } +-elif test $pkg_failed = untried; then +- { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. + +-Alternatively, you may set the environment variables GDK_CFLAGS +-and GDK_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. + +-To get pkg-config, see . +-See \`config.log' for more details." >&5 +-echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. ++# Check whether --with-doc-dir was given. ++if test "${with_doc_dir+set}" = set; then ++ withval=$with_doc_dir; ++fi + +-Alternatively, you may set the environment variables GDK_CFLAGS +-and GDK_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. + +-To get pkg-config, see . +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } ++if ! test -z "$with_doc_dir"; then ++ DOCDIR="$with_doc_dir/gnome-power-manager-$VERSION" + else +- GDK_CFLAGS=$pkg_cv_GDK_CFLAGS +- GDK_LIBS=$pkg_cv_GDK_LIBS +- { echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6; } +- : ++ DOCDIR="$DATADIR/doc/gnome-power-manager-$VERSION" + fi + + ++# Check whether --enable-policykit was given. ++if test "${enable_policykit+set}" = set; then ++ enableval=$enable_policykit; enable_policykit=$enableval ++else ++ enable_policykit=no ++fi ++ + ++{ echo "$as_me:$LINENO: checking whether to support PolicyKit" >&5 ++echo $ECHO_N "checking whether to support PolicyKit... $ECHO_C" >&6; } ++have_polkit=no ++if test x$enable_policykit = xyes ; then + + pkg_failed=no +-{ echo "$as_me:$LINENO: checking for XRANDR" >&5 +-echo $ECHO_N "checking for XRANDR... $ECHO_C" >&6; } ++{ echo "$as_me:$LINENO: checking for POLKIT" >&5 ++echo $ECHO_N "checking for POLKIT... $ECHO_C" >&6; } + +-if test -n "$XRANDR_CFLAGS"; then +- pkg_cv_XRANDR_CFLAGS="$XRANDR_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" +- xrandr >= \$XRANDR_REQUIRED +- xrender x11\"") >&5 +- ($PKG_CONFIG --exists --print-errors " +- xrandr >= $XRANDR_REQUIRED +- xrender x11") 2>&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$POLKIT_CFLAGS"; then ++ pkg_cv_POLKIT_CFLAGS="$POLKIT_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\\ ++ polkit-grant >= \$POLKIT_GNOME_REQUIRED\\ ++ polkit-dbus >= \$POLKIT_GNOME_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +- pkg_cv_XRANDR_CFLAGS=`$PKG_CONFIG --cflags " +- xrandr >= $XRANDR_REQUIRED +- xrender x11" 2>/dev/null` ++ pkg_cv_POLKIT_CFLAGS=`$PKG_CONFIG --cflags "\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi +-if test -n "$XRANDR_LIBS"; then +- pkg_cv_XRANDR_LIBS="$XRANDR_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" +- xrandr >= \$XRANDR_REQUIRED +- xrender x11\"") >&5 +- ($PKG_CONFIG --exists --print-errors " +- xrandr >= $XRANDR_REQUIRED +- xrender x11") 2>&5 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$POLKIT_LIBS"; then ++ pkg_cv_POLKIT_LIBS="$POLKIT_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\\ ++ polkit-grant >= \$POLKIT_GNOME_REQUIRED\\ ++ polkit-dbus >= \$POLKIT_GNOME_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +- pkg_cv_XRANDR_LIBS=`$PKG_CONFIG --libs " +- xrandr >= $XRANDR_REQUIRED +- xrender x11" 2>/dev/null` ++ pkg_cv_POLKIT_LIBS=`$PKG_CONFIG --libs "\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED" 2>/dev/null` + else + pkg_failed=yes + fi +- else +- pkg_failed=untried ++ fi ++else ++ pkg_failed=untried + fi + + +@@ -22960,41 +16025,41 @@ + _pkg_short_errors_supported=no + fi + if test $_pkg_short_errors_supported = yes; then +- XRANDR_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors " +- xrandr >= $XRANDR_REQUIRED +- xrender x11" 2>&1` ++ POLKIT_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED"` + else +- XRANDR_PKG_ERRORS=`$PKG_CONFIG --print-errors " +- xrandr >= $XRANDR_REQUIRED +- xrender x11" 2>&1` ++ POLKIT_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED"` + fi + # Put the nasty error message in config.log where it belongs +- echo "$XRANDR_PKG_ERRORS" >&5 +- +- { { echo "$as_me:$LINENO: error: Package requirements ( +- xrandr >= $XRANDR_REQUIRED +- xrender x11) were not met: ++ echo "$POLKIT_PKG_ERRORS" >&5 + +-$XRANDR_PKG_ERRORS ++ { { echo "$as_me:$LINENO: error: Package requirements (\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED) were not met: ++ ++$POLKIT_PKG_ERRORS + + Consider adjusting the PKG_CONFIG_PATH environment variable if you + installed software in a non-standard prefix. + +-Alternatively, you may set the environment variables XRANDR_CFLAGS +-and XRANDR_LIBS to avoid the need to call pkg-config. ++Alternatively, you may set the environment variables POLKIT_CFLAGS ++and POLKIT_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. + " >&5 +-echo "$as_me: error: Package requirements ( +- xrandr >= $XRANDR_REQUIRED +- xrender x11) were not met: ++echo "$as_me: error: Package requirements (\ ++ polkit-grant >= $POLKIT_GNOME_REQUIRED\ ++ polkit-dbus >= $POLKIT_GNOME_REQUIRED) were not met: + +-$XRANDR_PKG_ERRORS ++$POLKIT_PKG_ERRORS + + Consider adjusting the PKG_CONFIG_PATH environment variable if you + installed software in a non-standard prefix. + +-Alternatively, you may set the environment variables XRANDR_CFLAGS +-and XRANDR_LIBS to avoid the need to call pkg-config. ++Alternatively, you may set the environment variables POLKIT_CFLAGS ++and POLKIT_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. + " >&2;} + { (exit 1); exit 1; }; } +@@ -23003,8 +16068,8 @@ + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +-Alternatively, you may set the environment variables XRANDR_CFLAGS +-and XRANDR_LIBS to avoid the need to call pkg-config. ++Alternatively, you may set the environment variables POLKIT_CFLAGS ++and POLKIT_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. + + To get pkg-config, see . +@@ -23013,1321 +16078,810 @@ + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +-Alternatively, you may set the environment variables XRANDR_CFLAGS +-and XRANDR_LIBS to avoid the need to call pkg-config. ++Alternatively, you may set the environment variables POLKIT_CFLAGS ++and POLKIT_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. + + To get pkg-config, see . + See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + else +- XRANDR_CFLAGS=$pkg_cv_XRANDR_CFLAGS +- XRANDR_LIBS=$pkg_cv_XRANDR_LIBS ++ POLKIT_CFLAGS=$pkg_cv_POLKIT_CFLAGS ++ POLKIT_LIBS=$pkg_cv_POLKIT_LIBS + { echo "$as_me:$LINENO: result: yes" >&5 + echo "${ECHO_T}yes" >&6; } + : + fi + + ++ have_polkit=yes + +-# Extract the first word of "gconftool-2", so it can be a program name with args. +-set dummy gconftool-2; ac_word=$2 +-{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +-if test "${ac_cv_path_GCONFTOOL+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- case $GCONFTOOL in +- [\\/]* | ?:[\\/]*) +- ac_cv_path_GCONFTOOL="$GCONFTOOL" # Let the user override the test with a path. +- ;; +- *) +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_path_GCONFTOOL="$as_dir/$ac_word$ac_exec_ext" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +-done +-IFS=$as_save_IFS ++cat >>confdefs.h <<\_ACEOF ++#define HAVE_POLKIT 1 ++_ACEOF + +- ;; +-esac +-fi +-GCONFTOOL=$ac_cv_path_GCONFTOOL +-if test -n "$GCONFTOOL"; then +- { echo "$as_me:$LINENO: result: $GCONFTOOL" >&5 +-echo "${ECHO_T}$GCONFTOOL" >&6; } ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + else +- { echo "$as_me:$LINENO: result: no" >&5 ++ { echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6; } + fi + +- +- +- if test "x$GCONF_SCHEMA_INSTALL_SOURCE" = "x"; then +- GCONF_SCHEMA_CONFIG_SOURCE=`gconftool-2 --get-default-source` +- else +- GCONF_SCHEMA_CONFIG_SOURCE=$GCONF_SCHEMA_INSTALL_SOURCE +- fi +- +- +-# Check whether --with-gconf-source was given. +-if test "${with_gconf_source+set}" = set; then +- withval=$with_gconf_source; GCONF_SCHEMA_CONFIG_SOURCE="$withval" ++# Check whether --enable-checkfg was given. ++if test "${enable_checkfg+set}" = set; then ++ enableval=$enable_checkfg; enable_checkfg=$enableval ++else ++ enable_checkfg=no + fi + + ++{ echo "$as_me:$LINENO: checking whether to use check-foreground-console" >&5 ++echo $ECHO_N "checking whether to use check-foreground-console... $ECHO_C" >&6; } ++have_checkfg=no ++if test x$enable_checkfg = xyes ; then ++ have_checkfg=yes + +- { echo "$as_me:$LINENO: result: Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation" >&5 +-echo "${ECHO_T}Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation" >&6; } +- +- if test "x$GCONF_SCHEMA_FILE_DIR" = "x"; then +- GCONF_SCHEMA_FILE_DIR='$(sysconfdir)/gconf/schemas' +- fi ++cat >>confdefs.h <<\_ACEOF ++#define HAVE_CHECK_FG 1 ++_ACEOF + ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi + +-# Check whether --with-gconf-schema-file-dir was given. +-if test "${with_gconf_schema_file_dir+set}" = set; then +- withval=$with_gconf_schema_file_dir; GCONF_SCHEMA_FILE_DIR="$withval" ++# Check whether --enable-xevents was given. ++if test "${enable_xevents+set}" = set; then ++ enableval=$enable_xevents; enable_xevents=$enableval ++else ++ enable_xevents=yes + fi + + ++{ echo "$as_me:$LINENO: checking whether to support xevents" >&5 ++echo $ECHO_N "checking whether to support xevents... $ECHO_C" >&6; } ++have_xevents=no ++if test x$enable_xevents = xyes ; then ++ have_xevents=yes + +- { echo "$as_me:$LINENO: result: Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files" >&5 +-echo "${ECHO_T}Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files" >&6; } ++cat >>confdefs.h <<\_ACEOF ++#define HAVE_XEVENTS 1 ++_ACEOF + +- # Check whether --enable-schemas-install was given. +-if test "${enable_schemas_install+set}" = set; then +- enableval=$enable_schemas_install; case ${enableval} in +- yes|no) ;; +- *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-schemas-install" >&5 +-echo "$as_me: error: bad value ${enableval} for --enable-schemas-install" >&2;} +- { (exit 1); exit 1; }; } ;; +- esac ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- if test "$enable_schemas_install" != no; then +- GCONF_SCHEMAS_INSTALL_TRUE= +- GCONF_SCHEMAS_INSTALL_FALSE='#' ++# Check whether --enable-tests was given. ++if test "${enable_tests+set}" = set; then ++ enableval=$enable_tests; enable_tests=$enableval + else +- GCONF_SCHEMAS_INSTALL_TRUE='#' +- GCONF_SCHEMAS_INSTALL_FALSE= ++ enable_tests=no + fi + + ++{ echo "$as_me:$LINENO: checking whether to support tests" >&5 ++echo $ECHO_N "checking whether to support tests... $ECHO_C" >&6; } ++have_tests=no ++if test x$enable_tests = xyes ; then ++ have_tests=yes + +-{ echo "$as_me:$LINENO: checking for X" >&5 +-echo $ECHO_N "checking for X... $ECHO_C" >&6; } +- +- +-# Check whether --with-x was given. +-if test "${with_x+set}" = set; then +- withval=$with_x; +-fi ++cat >>confdefs.h <<\_ACEOF ++#define HAVE_TESTS 1 ++_ACEOF + +-# $have_x is `yes', `no', `disabled', or empty when we do not yet know. +-if test "x$with_x" = xno; then +- # The user explicitly disabled X. +- have_x=disabled +-else +- case $x_includes,$x_libraries in #( +- *\'*) { { echo "$as_me:$LINENO: error: Cannot use X directory names containing '" >&5 +-echo "$as_me: error: Cannot use X directory names containing '" >&2;} +- { (exit 1); exit 1; }; };; #( +- *,NONE | NONE,*) if test "${ac_cv_have_x+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + else +- # One or both of the vars are not set, and there is no cached value. +-ac_x_includes=no ac_x_libraries=no +-rm -f -r conftest.dir +-if mkdir conftest.dir; then +- cd conftest.dir +- cat >Imakefile <<'_ACEOF' +-incroot: +- @echo incroot='${INCROOT}' +-usrlibdir: +- @echo usrlibdir='${USRLIBDIR}' +-libdir: +- @echo libdir='${LIBDIR}' +-_ACEOF +- if (export CC; ${XMKMF-xmkmf}) >/dev/null 2>/dev/null && test -f Makefile; then +- # GNU make sometimes prints "make[1]: Entering...", which would confuse us. +- for ac_var in incroot usrlibdir libdir; do +- eval "ac_im_$ac_var=\`\${MAKE-make} $ac_var 2>/dev/null | sed -n 's/^$ac_var=//p'\`" +- done +- # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. +- for ac_extension in a so sl; do +- if test ! -f "$ac_im_usrlibdir/libX11.$ac_extension" && +- test -f "$ac_im_libdir/libX11.$ac_extension"; then +- ac_im_usrlibdir=$ac_im_libdir; break +- fi +- done +- # Screen out bogus values from the imake configuration. They are +- # bogus both because they are the default anyway, and because +- # using them would break gcc on systems where it needs fixed includes. +- case $ac_im_incroot in +- /usr/include) ac_x_includes= ;; +- *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;; +- esac +- case $ac_im_usrlibdir in +- /usr/lib | /lib) ;; +- *) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;; +- esac +- fi +- cd .. +- rm -f -r conftest.dir ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +-# Standard set of common directories for X headers. +-# Check X11 before X11Rn because it is often a symlink to the current release. +-ac_x_header_dirs=' +-/usr/X11/include +-/usr/X11R6/include +-/usr/X11R5/include +-/usr/X11R4/include + +-/usr/include/X11 +-/usr/include/X11R6 +-/usr/include/X11R5 +-/usr/include/X11R4 ++if test $have_tests = yes; then ++ HAVE_TESTS_TRUE= ++ HAVE_TESTS_FALSE='#' ++else ++ HAVE_TESTS_TRUE='#' ++ HAVE_TESTS_FALSE= ++fi + +-/usr/local/X11/include +-/usr/local/X11R6/include +-/usr/local/X11R5/include +-/usr/local/X11R4/include + +-/usr/local/include/X11 +-/usr/local/include/X11R6 +-/usr/local/include/X11R5 +-/usr/local/include/X11R4 ++# Check whether --enable-gconf-defaults was given. ++if test "${enable_gconf_defaults+set}" = set; then ++ enableval=$enable_gconf_defaults; enable_gconfdefaults=$enableval ++else ++ enable_gconfdefaults=yes ++fi + +-/usr/X386/include +-/usr/x386/include +-/usr/XFree86/include/X11 + +-/usr/include +-/usr/local/include +-/usr/unsupported/include +-/usr/athena/include +-/usr/local/x11r5/include +-/usr/lpp/Xamples/include ++{ echo "$as_me:$LINENO: checking whether to support gconf defaults" >&5 ++echo $ECHO_N "checking whether to support gconf defaults... $ECHO_C" >&6; } ++have_gconfdefaults=no ++if test x$enable_gconfdefaults = xyes ; then + +-/usr/openwin/include +-/usr/openwin/share/include' ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for POLKIT_GNOME" >&5 ++echo $ECHO_N "checking for POLKIT_GNOME... $ECHO_C" >&6; } + +-if test "$ac_x_includes" = no; then +- # Guess where to find include files, by looking for Xlib.h. +- # First, try using that file with no special directory specified. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include +-_ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$POLKIT_GNOME_CFLAGS"; then ++ pkg_cv_POLKIT_GNOME_CFLAGS="$POLKIT_GNOME_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ polkit-gnome >= \$POLKIT_GNOME_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED") 2>&5 + ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || +- test ! -s conftest.err +- }; then +- # We can compile using X headers with no special include directory. +-ac_x_includes= ++ (exit $ac_status); }; then ++ pkg_cv_POLKIT_GNOME_CFLAGS=`$PKG_CONFIG --cflags " ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED" 2>/dev/null` + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- for ac_dir in $ac_x_header_dirs; do +- if test -r "$ac_dir/X11/Xlib.h"; then +- ac_x_includes=$ac_dir +- break +- fi +-done ++ pkg_failed=yes + fi +- +-rm -f conftest.err conftest.$ac_ext +-fi # $ac_x_includes = no +- +-if test "$ac_x_libraries" = no; then +- # Check for the libraries. +- # See if we find them without any special options. +- # Don't add to $LIBS permanently. +- ac_save_LIBS=$LIBS +- LIBS="-lX11 $LIBS" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include +-int +-main () +-{ +-XrmInitialize () +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$POLKIT_GNOME_LIBS"; then ++ pkg_cv_POLKIT_GNOME_LIBS="$POLKIT_GNOME_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" ++ polkit-gnome >= \$POLKIT_GNOME_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors " ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED") 2>&5 + ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- LIBS=$ac_save_LIBS +-# We can link X programs with no special library path. +-ac_x_libraries= ++ (exit $ac_status); }; then ++ pkg_cv_POLKIT_GNOME_LIBS=`$PKG_CONFIG --libs " ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED" 2>/dev/null` + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- LIBS=$ac_save_LIBS +-for ac_dir in `echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g` +-do +- # Don't even attempt the hair of trying to link an X program! +- for ac_extension in a so sl; do +- if test -r "$ac_dir/libX11.$ac_extension"; then +- ac_x_libraries=$ac_dir +- break 2 ++ pkg_failed=yes ++fi + fi +- done +-done ++else ++ pkg_failed=untried + fi + +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-fi # $ac_x_libraries = no + +-case $ac_x_includes,$ac_x_libraries in #( +- no,* | *,no | *\'*) +- # Didn't find X, or a directory has "'" in its name. +- ac_cv_have_x="have_x=no";; #( +- *) +- # Record where we found X for the cache. +- ac_cv_have_x="have_x=yes\ +- ac_x_includes='$ac_x_includes'\ +- ac_x_libraries='$ac_x_libraries'" +-esac +-fi +-;; #( +- *) have_x=yes;; +- esac +- eval "$ac_cv_have_x" +-fi # $with_x != no + +-if test "$have_x" != yes; then +- { echo "$as_me:$LINENO: result: $have_x" >&5 +-echo "${ECHO_T}$have_x" >&6; } +- no_x=yes ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes + else +- # If each of the values was on the command line, it overrides each guess. +- test "x$x_includes" = xNONE && x_includes=$ac_x_includes +- test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries +- # Update the cache value to reflect the command line values. +- ac_cv_have_x="have_x=yes\ +- ac_x_includes='$x_includes'\ +- ac_x_libraries='$x_libraries'" +- { echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5 +-echo "${ECHO_T}libraries $x_libraries, headers $x_includes" >&6; } ++ _pkg_short_errors_supported=no + fi ++ if test $_pkg_short_errors_supported = yes; then ++ POLKIT_GNOME_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors " ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED"` ++ else ++ POLKIT_GNOME_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors " ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$POLKIT_GNOME_PKG_ERRORS" >&5 + +-if test "$no_x" = yes; then +- # Not all programs may use this symbol, but it does not hurt to define it. ++ { { echo "$as_me:$LINENO: error: Package requirements ( ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED) were not met: + +-cat >>confdefs.h <<\_ACEOF +-#define X_DISPLAY_MISSING 1 +-_ACEOF ++$POLKIT_GNOME_PKG_ERRORS + +- X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS= +-else +- if test -n "$x_includes"; then +- X_CFLAGS="$X_CFLAGS -I$x_includes" +- fi ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + +- # It would also be nice to do this for all -L options, not just this one. +- if test -n "$x_libraries"; then +- X_LIBS="$X_LIBS -L$x_libraries" +- # For Solaris; some versions of Sun CC require a space after -R and +- # others require no space. Words are not sufficient . . . . +- { echo "$as_me:$LINENO: checking whether -R must be followed by a space" >&5 +-echo $ECHO_N "checking whether -R must be followed by a space... $ECHO_C" >&6; } +- ac_xsave_LIBS=$LIBS; LIBS="$LIBS -R$x_libraries" +- ac_xsave_c_werror_flag=$ac_c_werror_flag +- ac_c_werror_flag=yes +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ ++Alternatively, you may set the environment variables POLKIT_GNOME_CFLAGS ++and POLKIT_GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements ( ++ polkit-gnome >= $POLKIT_GNOME_REQUIRED) were not met: + +-int +-main () +-{ ++$POLKIT_GNOME_PKG_ERRORS + +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- { echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6; } +- X_LIBS="$X_LIBS -R$x_libraries" ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables POLKIT_GNOME_CFLAGS ++and POLKIT_GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables POLKIT_GNOME_CFLAGS ++and POLKIT_GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables POLKIT_GNOME_CFLAGS ++and POLKIT_GNOME_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ POLKIT_GNOME_CFLAGS=$pkg_cv_POLKIT_GNOME_CFLAGS ++ POLKIT_GNOME_LIBS=$pkg_cv_POLKIT_GNOME_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi + +- LIBS="$ac_xsave_LIBS -R $x_libraries" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-int +-main () +-{ ++ have_gconfdefaults=yes + +- ; +- return 0; +-} ++cat >>confdefs.h <<\_ACEOF ++#define HAVE_GCONF_DEFAULTS 1 + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- { echo "$as_me:$LINENO: result: yes" >&5 ++ ++ { echo "$as_me:$LINENO: result: yes" >&5 + echo "${ECHO_T}yes" >&6; } +- X_LIBS="$X_LIBS -R $x_libraries" + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi + +- { echo "$as_me:$LINENO: result: neither works" >&5 +-echo "${ECHO_T}neither works" >&6; } ++ ++if test $have_gconfdefaults = yes; then ++ HAVE_GCONF_DEFAULTS_TRUE= ++ HAVE_GCONF_DEFAULTS_FALSE='#' ++else ++ HAVE_GCONF_DEFAULTS_TRUE='#' ++ HAVE_GCONF_DEFAULTS_FALSE= + fi + +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++ ++# Check whether --enable-applets was given. ++if test "${enable_applets+set}" = set; then ++ enableval=$enable_applets; enable_applets=$enableval ++else ++ enable_applets=yes + fi + +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +- ac_c_werror_flag=$ac_xsave_c_werror_flag +- LIBS=$ac_xsave_LIBS +- fi + +- # Check for system-dependent libraries X programs must link with. +- # Do this before checking for the system-independent R6 libraries +- # (-lICE), since we may need -lsocket or whatever for X linking. ++{ echo "$as_me:$LINENO: checking whether to build applet support" >&5 ++echo $ECHO_N "checking whether to build applet support... $ECHO_C" >&6; } ++have_applets=no ++if test x$enable_applets = xyes ; then ++ have_applets=yes + +- if test "$ISC" = yes; then +- X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet" +- else +- # Martyn Johnson says this is needed for Ultrix, if the X +- # libraries were built with DECnet support. And Karl Berry says +- # the Alpha needs dnet_stub (dnet does not exist). +- ac_xsave_LIBS="$LIBS"; LIBS="$LIBS $X_LIBS -lX11" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ ++cat >>confdefs.h <<\_ACEOF ++#define HAVE_APPLETS 1 + _ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char XOpenDisplay (); +-int +-main () +-{ +-return XOpenDisplay (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- : ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi + +- { echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet" >&5 +-echo $ECHO_N "checking for dnet_ntoa in -ldnet... $ECHO_C" >&6; } +-if test "${ac_cv_lib_dnet_dnet_ntoa+set}" = set; then ++ ++if test $have_applets = yes; then ++ HAVE_APPLETS_TRUE= ++ HAVE_APPLETS_FALSE='#' ++else ++ HAVE_APPLETS_TRUE='#' ++ HAVE_APPLETS_FALSE= ++fi ++ ++ ++# Check whether --enable-docbook-docs was given. ++if test "${enable_docbook_docs+set}" = set; then ++ enableval=$enable_docbook_docs; enable_docbook_docs=$enableval ++else ++ enable_docbook_docs=auto ++fi ++ ++ ++# Extract the first word of "xmlto", so it can be a program name with args. ++set dummy xmlto; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_XMLTO+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldnet $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ ++ case $XMLTO in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_XMLTO="$XMLTO" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_XMLTO="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char dnet_ntoa (); +-int +-main () +-{ +-return dnet_ntoa (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; ++ test -z "$ac_cv_path_XMLTO" && ac_cv_path_XMLTO="no" ++ ;; + esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- ac_cv_lib_dnet_dnet_ntoa=yes ++fi ++XMLTO=$ac_cv_path_XMLTO ++if test -n "$XMLTO"; then ++ { echo "$as_me:$LINENO: result: $XMLTO" >&5 ++echo "${ECHO_T}$XMLTO" >&6; } + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi + +- ac_cv_lib_dnet_dnet_ntoa=no ++ ++{ echo "$as_me:$LINENO: checking whether to build DocBook documentation" >&5 ++echo $ECHO_N "checking whether to build DocBook documentation... $ECHO_C" >&6; } ++if test x$XMLTO = xno ; then ++ have_docbook=no ++else ++ have_docbook=yes ++fi ++if test x$enable_docbook_docs = xauto ; then ++ if test x$have_docbook = xno ; then ++ enable_docbook_docs=no ++ else ++ enable_docbook_docs=yes ++ fi ++fi ++if test x$enable_docbook_docs = xyes; then ++ if test x$have_docbook = xno; then ++ { { echo "$as_me:$LINENO: error: Building DocBook docs explicitly required, but DocBook not found" >&5 ++echo "$as_me: error: Building DocBook docs explicitly required, but DocBook not found" >&2;} ++ { (exit 1); exit 1; }; } ++ fi + fi + +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS ++ ++if test x$enable_docbook_docs = xyes; then ++ DOCBOOK_DOCS_ENABLED_TRUE= ++ DOCBOOK_DOCS_ENABLED_FALSE='#' ++else ++ DOCBOOK_DOCS_ENABLED_TRUE='#' ++ DOCBOOK_DOCS_ENABLED_FALSE= + fi +-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_dnet_ntoa" >&5 +-echo "${ECHO_T}$ac_cv_lib_dnet_dnet_ntoa" >&6; } +-if test $ac_cv_lib_dnet_dnet_ntoa = yes; then +- X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet" ++ ++{ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ ++ ++# Check whether --with-dbus-services was given. ++if test "${with_dbus_services+set}" = set; then ++ withval=$with_dbus_services; + fi + +- if test $ac_cv_lib_dnet_dnet_ntoa = no; then +- { echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet_stub" >&5 +-echo $ECHO_N "checking for dnet_ntoa in -ldnet_stub... $ECHO_C" >&6; } +-if test "${ac_cv_lib_dnet_stub_dnet_ntoa+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ ++if ! test -z "$with_dbus_services" ; then ++ DBUS_SERVICES_DIR="$with_dbus_services" + else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldnet_stub $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ ++ # D-BUS 0.23 and higher use $prefix/share/dbus-1/services ++ DBUS_SERVICES_DIR="$DATADIR/dbus-1/services" ++fi + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char dnet_ntoa (); +-int +-main () +-{ +-return dnet_ntoa (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 ++ ++if $PKG_CONFIG --atleast-version $LIBNOTIFY_REQUIRED libnotify; then ++ have_libnotify=yes ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for LIBNOTIFY" >&5 ++echo $ECHO_N "checking for LIBNOTIFY... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$LIBNOTIFY_CFLAGS"; then ++ pkg_cv_LIBNOTIFY_CFLAGS="$LIBNOTIFY_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libnotify >= \$LIBNOTIFY_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "libnotify >= $LIBNOTIFY_REQUIRED") 2>&5 + ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- ac_cv_lib_dnet_stub_dnet_ntoa=yes ++ (exit $ac_status); }; then ++ pkg_cv_LIBNOTIFY_CFLAGS=`$PKG_CONFIG --cflags "libnotify >= $LIBNOTIFY_REQUIRED" 2>/dev/null` + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_dnet_stub_dnet_ntoa=no ++ pkg_failed=yes + fi +- +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS ++ fi ++else ++ pkg_failed=untried + fi +-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5 +-echo "${ECHO_T}$ac_cv_lib_dnet_stub_dnet_ntoa" >&6; } +-if test $ac_cv_lib_dnet_stub_dnet_ntoa = yes; then +- X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub" ++if test -n "$PKG_CONFIG"; then ++ if test -n "$LIBNOTIFY_LIBS"; then ++ pkg_cv_LIBNOTIFY_LIBS="$LIBNOTIFY_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libnotify >= \$LIBNOTIFY_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "libnotify >= $LIBNOTIFY_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_LIBNOTIFY_LIBS=`$PKG_CONFIG --libs "libnotify >= $LIBNOTIFY_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes + fi +- + fi ++else ++ pkg_failed=untried + fi + +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +- LIBS="$ac_xsave_LIBS" + +- # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT, +- # to get the SysV transport functions. +- # Chad R. Larson says the Pyramis MIS-ES running DC/OSx (SVR4) +- # needs -lnsl. +- # The nsl library prevents programs from opening the X display +- # on Irix 5.2, according to T.E. Dickey. +- # The functions gethostbyname, getservbyname, and inet_addr are +- # in -lbsd on LynxOS 3.0.1/i386, according to Lars Hecking. +- { echo "$as_me:$LINENO: checking for gethostbyname" >&5 +-echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6; } +-if test "${ac_cv_func_gethostbyname+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define gethostbyname to an innocuous variant, in case declares gethostbyname. +- For example, HP-UX 11i declares gettimeofday. */ +-#define gethostbyname innocuous_gethostbyname ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ LIBNOTIFY_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "libnotify >= $LIBNOTIFY_REQUIRED"` ++ else ++ LIBNOTIFY_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libnotify >= $LIBNOTIFY_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$LIBNOTIFY_PKG_ERRORS" >&5 + +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char gethostbyname (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ ++ { { echo "$as_me:$LINENO: error: Package requirements (libnotify >= $LIBNOTIFY_REQUIRED) were not met: + +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif ++$LIBNOTIFY_PKG_ERRORS + +-#undef gethostbyname ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char gethostbyname (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_gethostbyname || defined __stub___gethostbyname +-choke me +-#endif ++Alternatively, you may set the environment variables LIBNOTIFY_CFLAGS ++and LIBNOTIFY_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (libnotify >= $LIBNOTIFY_REQUIRED) were not met: + +-int +-main () +-{ +-return gethostbyname (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- ac_cv_func_gethostbyname=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++$LIBNOTIFY_PKG_ERRORS + +- ac_cv_func_gethostbyname=no ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables LIBNOTIFY_CFLAGS ++and LIBNOTIFY_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables LIBNOTIFY_CFLAGS ++and LIBNOTIFY_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables LIBNOTIFY_CFLAGS ++and LIBNOTIFY_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ LIBNOTIFY_CFLAGS=$pkg_cv_LIBNOTIFY_CFLAGS ++ LIBNOTIFY_LIBS=$pkg_cv_LIBNOTIFY_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : + fi + +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-{ echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5 +-echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6; } + +- if test $ac_cv_func_gethostbyname = no; then +- { echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 +-echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6; } +-if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lnsl $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char gethostbyname (); +-int +-main () +-{ +-return gethostbyname (); +- ; +- return 0; +-} ++cat >>confdefs.h <<\_ACEOF ++#define HAVE_LIBNOTIFY 1 + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- ac_cv_lib_nsl_gethostbyname=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_lib_nsl_gethostbyname=no ++else ++ have_libnotify=no + fi + +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-{ echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5 +-echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6; } +-if test $ac_cv_lib_nsl_gethostbyname = yes; then +- X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl" +-fi + +- if test $ac_cv_lib_nsl_gethostbyname = no; then +- { echo "$as_me:$LINENO: checking for gethostbyname in -lbsd" >&5 +-echo $ECHO_N "checking for gethostbyname in -lbsd... $ECHO_C" >&6; } +-if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++if test $have_libnotify = yes; then ++ HAVE_LIBNOTIFY_TRUE= ++ HAVE_LIBNOTIFY_FALSE='#' + else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lbsd $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ ++ HAVE_LIBNOTIFY_TRUE='#' ++ HAVE_LIBNOTIFY_FALSE= ++fi + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char gethostbyname (); +-int +-main () +-{ +-return gethostbyname (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 ++ ++if $PKG_CONFIG --atleast-version $UNIQUE_REQUIRED unique-1.0; then ++ have_unique=yes ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for UNIQUE" >&5 ++echo $ECHO_N "checking for UNIQUE... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$UNIQUE_CFLAGS"; then ++ pkg_cv_UNIQUE_CFLAGS="$UNIQUE_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"unique-1.0 >= \$UNIQUE_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "unique-1.0 >= $UNIQUE_REQUIRED") 2>&5 + ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- ac_cv_lib_bsd_gethostbyname=yes ++ (exit $ac_status); }; then ++ pkg_cv_UNIQUE_CFLAGS=`$PKG_CONFIG --cflags "unique-1.0 >= $UNIQUE_REQUIRED" 2>/dev/null` + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_bsd_gethostbyname=no ++ pkg_failed=yes + fi +- +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS ++ fi ++else ++ pkg_failed=untried + fi +-{ echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_gethostbyname" >&5 +-echo "${ECHO_T}$ac_cv_lib_bsd_gethostbyname" >&6; } +-if test $ac_cv_lib_bsd_gethostbyname = yes; then +- X_EXTRA_LIBS="$X_EXTRA_LIBS -lbsd" ++if test -n "$PKG_CONFIG"; then ++ if test -n "$UNIQUE_LIBS"; then ++ pkg_cv_UNIQUE_LIBS="$UNIQUE_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"unique-1.0 >= \$UNIQUE_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "unique-1.0 >= $UNIQUE_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_UNIQUE_LIBS=`$PKG_CONFIG --libs "unique-1.0 >= $UNIQUE_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes + fi +- +- fi + fi ++else ++ pkg_failed=untried ++fi + +- # lieder@skyler.mavd.honeywell.com says without -lsocket, +- # socket/setsockopt and other routines are undefined under SCO ODT +- # 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary +- # on later versions), says Simon Leinen: it contains gethostby* +- # variants that don't use the name server (or something). -lsocket +- # must be given before -lnsl if both are needed. We assume that +- # if connect needs -lnsl, so does gethostbyname. +- { echo "$as_me:$LINENO: checking for connect" >&5 +-echo $ECHO_N "checking for connect... $ECHO_C" >&6; } +-if test "${ac_cv_func_connect+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define connect to an innocuous variant, in case declares connect. +- For example, HP-UX 11i declares gettimeofday. */ +-#define connect innocuous_connect ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ UNIQUE_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "unique-1.0 >= $UNIQUE_REQUIRED"` ++ else ++ UNIQUE_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "unique-1.0 >= $UNIQUE_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$UNIQUE_PKG_ERRORS" >&5 + +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char connect (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ ++ { { echo "$as_me:$LINENO: error: Package requirements (unique-1.0 >= $UNIQUE_REQUIRED) were not met: + +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif ++$UNIQUE_PKG_ERRORS + +-#undef connect ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char connect (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_connect || defined __stub___connect +-choke me +-#endif ++Alternatively, you may set the environment variables UNIQUE_CFLAGS ++and UNIQUE_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (unique-1.0 >= $UNIQUE_REQUIRED) were not met: ++ ++$UNIQUE_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables UNIQUE_CFLAGS ++and UNIQUE_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables UNIQUE_CFLAGS ++and UNIQUE_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. + +-int +-main () +-{ +-return connect (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- ac_cv_func_connect=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++Alternatively, you may set the environment variables UNIQUE_CFLAGS ++and UNIQUE_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. + +- ac_cv_func_connect=no ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ UNIQUE_CFLAGS=$pkg_cv_UNIQUE_CFLAGS ++ UNIQUE_LIBS=$pkg_cv_UNIQUE_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : + fi + +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-{ echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5 +-echo "${ECHO_T}$ac_cv_func_connect" >&6; } + +- if test $ac_cv_func_connect = no; then +- { echo "$as_me:$LINENO: checking for connect in -lsocket" >&5 +-echo $ECHO_N "checking for connect in -lsocket... $ECHO_C" >&6; } +-if test "${ac_cv_lib_socket_connect+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lsocket $X_EXTRA_LIBS $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char connect (); +-int +-main () +-{ +-return connect (); +- ; +- return 0; +-} ++cat >>confdefs.h <<\_ACEOF ++#define HAVE_UNIQUE 1 + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- ac_cv_lib_socket_connect=yes ++ + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ have_unique=no + +- ac_cv_lib_socket_connect=no +-fi ++cat >>confdefs.h <<\_ACEOF ++#define HAVE_UNIQUE 0 ++_ACEOF + +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-{ echo "$as_me:$LINENO: result: $ac_cv_lib_socket_connect" >&5 +-echo "${ECHO_T}$ac_cv_lib_socket_connect" >&6; } +-if test $ac_cv_lib_socket_connect = yes; then +- X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS" + fi + +- fi + +- # Guillermo Gomez says -lposix is necessary on A/UX. +- { echo "$as_me:$LINENO: checking for remove" >&5 +-echo $ECHO_N "checking for remove... $ECHO_C" >&6; } +-if test "${ac_cv_func_remove+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++if test $have_unique = yes; then ++ HAVE_UNIQUE_TRUE= ++ HAVE_UNIQUE_FALSE='#' + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define remove to an innocuous variant, in case declares remove. +- For example, HP-UX 11i declares gettimeofday. */ +-#define remove innocuous_remove ++ HAVE_UNIQUE_TRUE='#' ++ HAVE_UNIQUE_FALSE= ++fi + +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char remove (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ + +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif + +-#undef remove ++# Like AC_CHECK_HEADER, but it uses the already-computed -I directories. ++# + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char remove (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_remove || defined __stub___remove +-choke me +-#endif + +-int +-main () +-{ +-return remove (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- ac_cv_func_remove=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++# Like AC_TRY_COMPILE, but it uses the already-computed -I directories. ++# + +- ac_cv_func_remove=no +-fi + +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-{ echo "$as_me:$LINENO: result: $ac_cv_func_remove" >&5 +-echo "${ECHO_T}$ac_cv_func_remove" >&6; } + +- if test $ac_cv_func_remove = no; then +- { echo "$as_me:$LINENO: checking for remove in -lposix" >&5 +-echo $ECHO_N "checking for remove in -lposix... $ECHO_C" >&6; } +-if test "${ac_cv_lib_posix_remove+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lposix $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ ++# Like AC_CHECK_LIB, but it uses the already-computed -I and -L directories. ++# Use this sparingly; it probably doesn't work very well on X programs. ++# ++ + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char remove (); +-int +-main () +-{ +-return remove (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- ac_cv_lib_posix_remove=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_lib_posix_remove=no +-fi ++# Usage: HANDLE_X_PATH_ARG([variable_name], ++# [--command-line-option], ++# [descriptive string]) ++# ++# All of the --with options take three forms: ++# ++# --with-foo (or --with-foo=yes) ++# --without-foo (or --with-foo=no) ++# --with-foo=/DIR ++# ++# This function, HANDLE_X_PATH_ARG, deals with the /DIR case. When it sees ++# a directory (string beginning with a slash) it checks to see whether ++# /DIR/include and /DIR/lib exist, and adds them to $X_CFLAGS and $X_LIBS ++# as appropriate. ++# + +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-{ echo "$as_me:$LINENO: result: $ac_cv_lib_posix_remove" >&5 +-echo "${ECHO_T}$ac_cv_lib_posix_remove" >&6; } +-if test $ac_cv_lib_posix_remove = yes; then +- X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix" +-fi + +- fi + +- # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. +- { echo "$as_me:$LINENO: checking for shmat" >&5 +-echo $ECHO_N "checking for shmat... $ECHO_C" >&6; } +-if test "${ac_cv_func_shmat+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ ++have_dpms=no ++with_dpms_req=unspecified ++GPM_EXTRA_LIBS="-lresolv" ++ ++ ++# Check whether --with-dpms-ext was given. ++if test "${with_dpms_ext+set}" = set; then ++ withval=$with_dpms_ext; with_dpms="$withval"; with_dpms_req="$withval" + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define shmat to an innocuous variant, in case declares shmat. +- For example, HP-UX 11i declares gettimeofday. */ +-#define shmat innocuous_shmat ++ with_dpms=yes ++fi + +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char shmat (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ + +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif + +-#undef shmat ++ case "$with_dpms" in ++ yes) ;; ++ no) ;; + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char shmat (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_shmat || defined __stub___shmat +-choke me +-#endif ++ /*) ++ { echo "$as_me:$LINENO: checking for DPMS headers" >&5 ++echo $ECHO_N "checking for DPMS headers... $ECHO_C" >&6; } ++ d=$with_dpms/include ++ if test -d $d; then ++ X_CFLAGS="-I$d $X_CFLAGS" ++ { echo "$as_me:$LINENO: result: $d" >&5 ++echo "${ECHO_T}$d" >&6; } ++ else ++ { echo "$as_me:$LINENO: result: not found ($d: no such directory)" >&5 ++echo "${ECHO_T}not found ($d: no such directory)" >&6; } ++ fi + +-int +-main () +-{ +-return shmat (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- ac_cv_func_shmat=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ { echo "$as_me:$LINENO: checking for DPMS libs" >&5 ++echo $ECHO_N "checking for DPMS libs... $ECHO_C" >&6; } ++ d=$with_dpms/lib ++ if test -d $d; then ++ X_LIBS="-L$d $X_LIBS" ++ { echo "$as_me:$LINENO: result: $d" >&5 ++echo "${ECHO_T}$d" >&6; } ++ else ++ { echo "$as_me:$LINENO: result: not found ($d: no such directory)" >&5 ++echo "${ECHO_T}not found ($d: no such directory)" >&6; } ++ fi + +- ac_cv_func_shmat=no +-fi ++ # replace the directory string with "yes". ++ with_dpms_req="yes" ++ with_dpms=$with_dpms_req ++ ;; + +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-{ echo "$as_me:$LINENO: result: $ac_cv_func_shmat" >&5 +-echo "${ECHO_T}$ac_cv_func_shmat" >&6; } ++ *) ++ echo "" ++ echo "error: argument to --with-dpms-ext must be \"yes\", \"no\", or a directory." ++ echo " If it is a directory, then \`DIR/include' will be added to" ++ echo " the -I list, and \`DIR/lib' will be added to the -L list." ++ exit 1 ++ ;; ++ esac + +- if test $ac_cv_func_shmat = no; then +- { echo "$as_me:$LINENO: checking for shmat in -lipc" >&5 +-echo $ECHO_N "checking for shmat in -lipc... $ECHO_C" >&6; } +-if test "${ac_cv_lib_ipc_shmat+set}" = set; then ++ ++if test "$with_dpms" = yes; then ++ ++ # first check for dpms.h ++ ++ ac_save_CPPFLAGS="$CPPFLAGS" ++ if test \! -z "$includedir" ; then ++ CPPFLAGS="$CPPFLAGS -I$includedir" ++ fi ++ CPPFLAGS="$CPPFLAGS $X_CFLAGS" ++ { echo "$as_me:$LINENO: checking for X11/extensions/dpms.h" >&5 ++echo $ECHO_N "checking for X11/extensions/dpms.h... $ECHO_C" >&6; } ++if test "${ac_cv_header_X11_extensions_dpms_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lipc $LIBS" +-cat >conftest.$ac_ext <<_ACEOF ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ ++#include ++ #include + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char shmat (); +-int +-main () +-{ +-return shmat (); +- ; +- return 0; +-} ++#include + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac + eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 +@@ -24336,45 +16890,55 @@ + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- ac_cv_lib_ipc_shmat=yes ++ } && test -s conftest.$ac_objext; then ++ ac_cv_header_X11_extensions_dpms_h=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_lib_ipc_shmat=no ++ ac_cv_header_X11_extensions_dpms_h=no + fi + +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-{ echo "$as_me:$LINENO: result: $ac_cv_lib_ipc_shmat" >&5 +-echo "${ECHO_T}$ac_cv_lib_ipc_shmat" >&6; } +-if test $ac_cv_lib_ipc_shmat = yes; then +- X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc" ++{ echo "$as_me:$LINENO: result: $ac_cv_header_X11_extensions_dpms_h" >&5 ++echo "${ECHO_T}$ac_cv_header_X11_extensions_dpms_h" >&6; } ++if test $ac_cv_header_X11_extensions_dpms_h = yes; then ++ have_dpms=yes + fi + +- fi ++ ++ CPPFLAGS="$ac_save_CPPFLAGS" ++ ++ # if that succeeded, then check for the DPMS code in the libraries ++ if test "$have_dpms" = yes; then ++ ++ # first look in -lXext (this is where it is with XFree86 4.0) ++ have_dpms=no ++ ++ ac_save_CPPFLAGS="$CPPFLAGS" ++ ac_save_LDFLAGS="$LDFLAGS" ++# ac_save_LIBS="$LIBS" ++ ++ if test \! -z "$includedir" ; then ++ CPPFLAGS="$CPPFLAGS -I$includedir" + fi ++ # note: $X_CFLAGS includes $x_includes ++ CPPFLAGS="$CPPFLAGS $X_CFLAGS" + +- # Check for libraries that X11R6 Xt/Xaw programs need. +- ac_save_LDFLAGS=$LDFLAGS +- test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries" +- # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to +- # check for ICE first), but we must link in the order -lSM -lICE or +- # we get undefined symbols. So assume we have SM if we have ICE. +- # These have to be linked with before -lX11, unlike the other +- # libraries we check for below, so use a different variable. +- # John Interrante, Karl Berry +- { echo "$as_me:$LINENO: checking for IceConnectionNumber in -lICE" >&5 +-echo $ECHO_N "checking for IceConnectionNumber in -lICE... $ECHO_C" >&6; } +-if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then ++ if test \! -z "$libdir" ; then ++ LDFLAGS="$LDFLAGS -L$libdir" ++ fi ++ # note: $X_LIBS includes $x_libraries ++ LDFLAGS="$LDFLAGS $ALL_X_LIBS" ++ ++ { echo "$as_me:$LINENO: checking for DPMSInfo in -lXext" >&5 ++echo $ECHO_N "checking for DPMSInfo in -lXext... $ECHO_C" >&6; } ++if test "${ac_cv_lib_Xext_DPMSInfo+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS +-LIBS="-lICE $X_EXTRA_LIBS $LIBS" ++LIBS="-lXext -lXext -lX11 $LIBS" + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -24388,11 +16952,11 @@ + #ifdef __cplusplus + extern "C" + #endif +-char IceConnectionNumber (); ++char DPMSInfo (); + int + main () + { +-return IceConnectionNumber (); ++return DPMSInfo (); + ; + return 0; + } +@@ -24415,494 +16979,226 @@ + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then +- ac_cv_lib_ICE_IceConnectionNumber=yes ++ ac_cv_lib_Xext_DPMSInfo=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_lib_ICE_IceConnectionNumber=no ++ ac_cv_lib_Xext_DPMSInfo=no + fi + + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-{ echo "$as_me:$LINENO: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5 +-echo "${ECHO_T}$ac_cv_lib_ICE_IceConnectionNumber" >&6; } +-if test $ac_cv_lib_ICE_IceConnectionNumber = yes; then +- X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE" +-fi +- +- LDFLAGS=$ac_save_LDFLAGS +- +-fi +- +- +-ALL_X_LIBS="$X_LIBS $X_PRE_LIBS -lX11 $X_EXTRA_LIBS" +- +-SYSCONFDIR=$sysconfdir +- +-DATADIR=$datadir +- +-BINDIR=$bindir +- +-SBINDIR=$sbindir +- +- +- +-# Check whether --with-doc-dir was given. +-if test "${with_doc_dir+set}" = set; then +- withval=$with_doc_dir; +-fi +- +- +-if ! test -z "$with_doc_dir"; then +- DOCDIR="$with_doc_dir/gnome-power-manager-$VERSION" +-else +- DOCDIR="$DATADIR/doc/gnome-power-manager-$VERSION" +-fi +- +- +-# Check whether --enable-policykit was given. +-if test "${enable_policykit+set}" = set; then +- enableval=$enable_policykit; enable_policykit=$enableval +-else +- enable_policykit=no +-fi +- +- +-{ echo "$as_me:$LINENO: checking whether to support PolicyKit" >&5 +-echo $ECHO_N "checking whether to support PolicyKit... $ECHO_C" >&6; } +-have_polkit=no +-if test x$enable_policykit = xyes ; then +- +-pkg_failed=no +-{ echo "$as_me:$LINENO: checking for POLKIT" >&5 +-echo $ECHO_N "checking for POLKIT... $ECHO_C" >&6; } +- +-if test -n "$POLKIT_CFLAGS"; then +- pkg_cv_POLKIT_CFLAGS="$POLKIT_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\\ +- polkit-grant >= \$POLKIT_GNOME_REQUIRED\\ +- polkit-dbus >= \$POLKIT_GNOME_REQUIRED\"") >&5 +- ($PKG_CONFIG --exists --print-errors "\ +- polkit-grant >= $POLKIT_GNOME_REQUIRED\ +- polkit-dbus >= $POLKIT_GNOME_REQUIRED") 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_POLKIT_CFLAGS=`$PKG_CONFIG --cflags "\ +- polkit-grant >= $POLKIT_GNOME_REQUIRED\ +- polkit-dbus >= $POLKIT_GNOME_REQUIRED" 2>/dev/null` +-else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried +-fi +-if test -n "$POLKIT_LIBS"; then +- pkg_cv_POLKIT_LIBS="$POLKIT_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\\ +- polkit-grant >= \$POLKIT_GNOME_REQUIRED\\ +- polkit-dbus >= \$POLKIT_GNOME_REQUIRED\"") >&5 +- ($PKG_CONFIG --exists --print-errors "\ +- polkit-grant >= $POLKIT_GNOME_REQUIRED\ +- polkit-dbus >= $POLKIT_GNOME_REQUIRED") 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_POLKIT_LIBS=`$PKG_CONFIG --libs "\ +- polkit-grant >= $POLKIT_GNOME_REQUIRED\ +- polkit-dbus >= $POLKIT_GNOME_REQUIRED" 2>/dev/null` +-else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried +-fi +- +- +- +-if test $pkg_failed = yes; then +- +-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then +- _pkg_short_errors_supported=yes +-else +- _pkg_short_errors_supported=no +-fi +- if test $_pkg_short_errors_supported = yes; then +- POLKIT_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "\ +- polkit-grant >= $POLKIT_GNOME_REQUIRED\ +- polkit-dbus >= $POLKIT_GNOME_REQUIRED" 2>&1` +- else +- POLKIT_PKG_ERRORS=`$PKG_CONFIG --print-errors "\ +- polkit-grant >= $POLKIT_GNOME_REQUIRED\ +- polkit-dbus >= $POLKIT_GNOME_REQUIRED" 2>&1` +- fi +- # Put the nasty error message in config.log where it belongs +- echo "$POLKIT_PKG_ERRORS" >&5 +- +- { { echo "$as_me:$LINENO: error: Package requirements (\ +- polkit-grant >= $POLKIT_GNOME_REQUIRED\ +- polkit-dbus >= $POLKIT_GNOME_REQUIRED) were not met: +- +-$POLKIT_PKG_ERRORS +- +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. +- +-Alternatively, you may set the environment variables POLKIT_CFLAGS +-and POLKIT_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&5 +-echo "$as_me: error: Package requirements (\ +- polkit-grant >= $POLKIT_GNOME_REQUIRED\ +- polkit-dbus >= $POLKIT_GNOME_REQUIRED) were not met: +- +-$POLKIT_PKG_ERRORS +- +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. +- +-Alternatively, you may set the environment variables POLKIT_CFLAGS +-and POLKIT_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&2;} +- { (exit 1); exit 1; }; } +-elif test $pkg_failed = untried; then +- { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. +- +-Alternatively, you may set the environment variables POLKIT_CFLAGS +-and POLKIT_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +- +-To get pkg-config, see . +-See \`config.log' for more details." >&5 +-echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. +- +-Alternatively, you may set the environment variables POLKIT_CFLAGS +-and POLKIT_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +- +-To get pkg-config, see . +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-else +- POLKIT_CFLAGS=$pkg_cv_POLKIT_CFLAGS +- POLKIT_LIBS=$pkg_cv_POLKIT_LIBS +- { echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6; } +- : +-fi +- +- +- have_polkit=yes +- +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_POLKIT 1 +-_ACEOF +- +- { echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6; } +-else +- { echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6; } +-fi +- +-# Check whether --enable-checkfg was given. +-if test "${enable_checkfg+set}" = set; then +- enableval=$enable_checkfg; enable_checkfg=$enableval +-else +- enable_checkfg=no +-fi +- +- +-{ echo "$as_me:$LINENO: checking whether to use check-foreground-console" >&5 +-echo $ECHO_N "checking whether to use check-foreground-console... $ECHO_C" >&6; } +-have_checkfg=no +-if test x$enable_checkfg = xyes ; then +- have_checkfg=yes +- +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_CHECK_FG 1 +-_ACEOF +- +- { echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6; } +-else +- { echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6; } +-fi +- +-# Check whether --enable-xevents was given. +-if test "${enable_xevents+set}" = set; then +- enableval=$enable_xevents; enable_xevents=$enableval +-else +- enable_xevents=yes +-fi +- +- +-{ echo "$as_me:$LINENO: checking whether to support xevents" >&5 +-echo $ECHO_N "checking whether to support xevents... $ECHO_C" >&6; } +-have_xevents=no +-if test x$enable_xevents = xyes ; then +- have_xevents=yes +- +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_XEVENTS 1 +-_ACEOF +- +- { echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6; } +-else +- { echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6; } +-fi +- +-# Check whether --enable-tests was given. +-if test "${enable_tests+set}" = set; then +- enableval=$enable_tests; enable_tests=$enableval +-else +- enable_tests=no +-fi +- +- +-{ echo "$as_me:$LINENO: checking whether to support tests" >&5 +-echo $ECHO_N "checking whether to support tests... $ECHO_C" >&6; } +-have_tests=no +-if test x$enable_tests = xyes ; then +- have_tests=yes +- +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_TESTS 1 +-_ACEOF +- +- { echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6; } +-else +- { echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6; } ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS + fi +- if test $have_tests = yes; then +- HAVE_TESTS_TRUE= +- HAVE_TESTS_FALSE='#' ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_Xext_DPMSInfo" >&5 ++echo "${ECHO_T}$ac_cv_lib_Xext_DPMSInfo" >&6; } ++if test $ac_cv_lib_Xext_DPMSInfo = yes; then ++ have_dpms=yes + else +- HAVE_TESTS_TRUE='#' +- HAVE_TESTS_FALSE= ++ true + fi + ++ CPPFLAGS="$ac_save_CPPFLAGS" ++ LDFLAGS="$ac_save_LDFLAGS" ++# LIBS="$ac_save_LIBS" + +-# Check whether --enable-gconf-defaults was given. +-if test "${enable_gconf_defaults+set}" = set; then +- enableval=$enable_gconf_defaults; enable_gconfdefaults=$enableval +-else +- enable_gconfdefaults=yes +-fi + ++ # if that failed, look in -lXdpms (this is where it was in XFree86 3.x) ++ if test "$have_dpms" = no; then + +-{ echo "$as_me:$LINENO: checking whether to support gconf defaults" >&5 +-echo $ECHO_N "checking whether to support gconf defaults... $ECHO_C" >&6; } +-have_gconfdefaults=no +-if test x$enable_gconfdefaults = xyes ; then ++ ac_save_CPPFLAGS="$CPPFLAGS" ++ ac_save_LDFLAGS="$LDFLAGS" ++# ac_save_LIBS="$LIBS" + +-pkg_failed=no +-{ echo "$as_me:$LINENO: checking for POLKIT_GNOME" >&5 +-echo $ECHO_N "checking for POLKIT_GNOME... $ECHO_C" >&6; } ++ if test \! -z "$includedir" ; then ++ CPPFLAGS="$CPPFLAGS -I$includedir" ++ fi ++ # note: $X_CFLAGS includes $x_includes ++ CPPFLAGS="$CPPFLAGS $X_CFLAGS" + +-if test -n "$POLKIT_GNOME_CFLAGS"; then +- pkg_cv_POLKIT_GNOME_CFLAGS="$POLKIT_GNOME_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" +- polkit-gnome >= \$POLKIT_GNOME_REQUIRED\"") >&5 +- ($PKG_CONFIG --exists --print-errors " +- polkit-gnome >= $POLKIT_GNOME_REQUIRED") 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_POLKIT_GNOME_CFLAGS=`$PKG_CONFIG --cflags " +- polkit-gnome >= $POLKIT_GNOME_REQUIRED" 2>/dev/null` ++ if test \! -z "$libdir" ; then ++ LDFLAGS="$LDFLAGS -L$libdir" ++ fi ++ # note: $X_LIBS includes $x_libraries ++ LDFLAGS="$LDFLAGS $ALL_X_LIBS" ++ ++ { echo "$as_me:$LINENO: checking for DPMSInfo in -lXdpms" >&5 ++echo $ECHO_N "checking for DPMSInfo in -lXdpms... $ECHO_C" >&6; } ++if test "${ac_cv_lib_Xdpms_DPMSInfo+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried +-fi +-if test -n "$POLKIT_GNOME_LIBS"; then +- pkg_cv_POLKIT_GNOME_LIBS="$POLKIT_GNOME_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \" +- polkit-gnome >= \$POLKIT_GNOME_REQUIRED\"") >&5 +- ($PKG_CONFIG --exists --print-errors " +- polkit-gnome >= $POLKIT_GNOME_REQUIRED") 2>&5 ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lXdpms -lXext -lX11 $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char DPMSInfo (); ++int ++main () ++{ ++return DPMSInfo (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_POLKIT_GNOME_LIBS=`$PKG_CONFIG --libs " +- polkit-gnome >= $POLKIT_GNOME_REQUIRED" 2>/dev/null` ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_Xdpms_DPMSInfo=yes + else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried +-fi +- +- ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-if test $pkg_failed = yes; then ++ ac_cv_lib_Xdpms_DPMSInfo=no ++fi + +-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then +- _pkg_short_errors_supported=yes ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_Xdpms_DPMSInfo" >&5 ++echo "${ECHO_T}$ac_cv_lib_Xdpms_DPMSInfo" >&6; } ++if test $ac_cv_lib_Xdpms_DPMSInfo = yes; then ++ have_dpms=yes; XDPMS_LIBS="-lXdpms" + else +- _pkg_short_errors_supported=no ++ true + fi +- if test $_pkg_short_errors_supported = yes; then +- POLKIT_GNOME_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors " +- polkit-gnome >= $POLKIT_GNOME_REQUIRED" 2>&1` +- else +- POLKIT_GNOME_PKG_ERRORS=`$PKG_CONFIG --print-errors " +- polkit-gnome >= $POLKIT_GNOME_REQUIRED" 2>&1` +- fi +- # Put the nasty error message in config.log where it belongs +- echo "$POLKIT_GNOME_PKG_ERRORS" >&5 +- +- { { echo "$as_me:$LINENO: error: Package requirements ( +- polkit-gnome >= $POLKIT_GNOME_REQUIRED) were not met: +- +-$POLKIT_GNOME_PKG_ERRORS +- +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. +- +-Alternatively, you may set the environment variables POLKIT_GNOME_CFLAGS +-and POLKIT_GNOME_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&5 +-echo "$as_me: error: Package requirements ( +- polkit-gnome >= $POLKIT_GNOME_REQUIRED) were not met: + +-$POLKIT_GNOME_PKG_ERRORS ++ CPPFLAGS="$ac_save_CPPFLAGS" ++ LDFLAGS="$ac_save_LDFLAGS" ++# LIBS="$ac_save_LIBS" + +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. ++ fi ++ fi + +-Alternatively, you may set the environment variables POLKIT_GNOME_CFLAGS +-and POLKIT_GNOME_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&2;} +- { (exit 1); exit 1; }; } +-elif test $pkg_failed = untried; then +- { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. + +-Alternatively, you may set the environment variables POLKIT_GNOME_CFLAGS +-and POLKIT_GNOME_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. ++ # if that succeeded, then we've really got it. ++ if test "$have_dpms" = yes; then + +-To get pkg-config, see . +-See \`config.log' for more details." >&5 +-echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. ++cat >>confdefs.h <<\_ACEOF ++#define HAVE_DPMS_EXTENSION 1 ++_ACEOF + +-Alternatively, you may set the environment variables POLKIT_GNOME_CFLAGS +-and POLKIT_GNOME_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. ++ GPM_EXTRA_LIBS="$GPM_EXTRA_LIBS -lXext" ++ fi + +-To get pkg-config, see . +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-else +- POLKIT_GNOME_CFLAGS=$pkg_cv_POLKIT_GNOME_CFLAGS +- POLKIT_GNOME_LIBS=$pkg_cv_POLKIT_GNOME_LIBS +- { echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6; } +- : ++elif test "$with_dpms" != no; then ++ echo "error: must be yes or no: --with-dpms-ext=$with_dpms" ++ exit 1 + fi + +- +- have_gconfdefaults=yes +- +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_GCONF_DEFAULTS 1 ++{ echo "$as_me:$LINENO: checking for Solaris kstat" >&5 ++echo $ECHO_N "checking for Solaris kstat... $ECHO_C" >&6; } ++{ echo "$as_me:$LINENO: checking for kstat_open in -lkstat" >&5 ++echo $ECHO_N "checking for kstat_open in -lkstat... $ECHO_C" >&6; } ++if test "${ac_cv_lib_kstat_kstat_open+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lkstat $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ + _ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +- { echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6; } +-else +- { echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6; } +-fi +- if test $have_gconfdefaults = yes; then +- HAVE_GCONF_DEFAULTS_TRUE= +- HAVE_GCONF_DEFAULTS_FALSE='#' ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char kstat_open (); ++int ++main () ++{ ++return kstat_open (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_kstat_kstat_open=yes + else +- HAVE_GCONF_DEFAULTS_TRUE='#' +- HAVE_GCONF_DEFAULTS_FALSE= +-fi +- ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-# Check whether --enable-applets was given. +-if test "${enable_applets+set}" = set; then +- enableval=$enable_applets; enable_applets=$enableval +-else +- enable_applets=yes ++ ac_cv_lib_kstat_kstat_open=no + fi + ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_kstat_kstat_open" >&5 ++echo "${ECHO_T}$ac_cv_lib_kstat_kstat_open" >&6; } ++if test $ac_cv_lib_kstat_kstat_open = yes; then + +-{ echo "$as_me:$LINENO: checking whether to build applet support" >&5 +-echo $ECHO_N "checking whether to build applet support... $ECHO_C" >&6; } +-have_applets=no +-if test x$enable_applets = xyes ; then +- have_applets=yes + + cat >>confdefs.h <<\_ACEOF +-#define HAVE_APPLETS 1 ++#define HAVE_KSTAT 1 + _ACEOF + +- { echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6; } +-else +- { echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6; } +-fi +- if test $have_applets = yes; then +- HAVE_APPLETS_TRUE= +- HAVE_APPLETS_FALSE='#' +-else +- HAVE_APPLETS_TRUE='#' +- HAVE_APPLETS_FALSE= +-fi +- ++ GPM_EXTRA_LIBS="$GPM_EXTRA_LIBS -lkstat" + +-# Check whether --enable-docbook-docs was given. +-if test "${enable_docbook_docs+set}" = set; then +- enableval=$enable_docbook_docs; enable_docbook_docs=$enableval +-else +- enable_docbook_docs=auto + fi + + +-# Extract the first word of "xmlto", so it can be a program name with args. +-set dummy xmlto; ac_word=$2 ++ ++# Extract the first word of "docbook2man", so it can be a program name with args. ++set dummy docbook2man; ac_word=$2 + { echo "$as_me:$LINENO: checking for $ac_word" >&5 + echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +-if test "${ac_cv_path_XMLTO+set}" = set; then ++if test "${ac_cv_path_DOCBOOK2MAN+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- case $XMLTO in ++ case $DOCBOOK2MAN in + [\\/]* | ?:[\\/]*) +- ac_cv_path_XMLTO="$XMLTO" # Let the user override the test with a path. ++ ac_cv_path_DOCBOOK2MAN="$DOCBOOK2MAN" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +@@ -24912,2562 +17208,2651 @@ + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_path_XMLTO="$as_dir/$ac_word$ac_exec_ext" ++ ac_cv_path_DOCBOOK2MAN="$as_dir/$ac_word$ac_exec_ext" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done +-IFS=$as_save_IFS ++IFS=$as_save_IFS ++ ++ test -z "$ac_cv_path_DOCBOOK2MAN" && ac_cv_path_DOCBOOK2MAN="no" ++ ;; ++esac ++fi ++DOCBOOK2MAN=$ac_cv_path_DOCBOOK2MAN ++if test -n "$DOCBOOK2MAN"; then ++ { echo "$as_me:$LINENO: result: $DOCBOOK2MAN" >&5 ++echo "${ECHO_T}$DOCBOOK2MAN" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++if test "$DOCBOOK2MAN" = "no" ; then ++ { echo "$as_me:$LINENO: WARNING: docbook2man not found, will not be able to build man documentation" >&5 ++echo "$as_me: WARNING: docbook2man not found, will not be able to build man documentation" >&2;} ++fi ++ ++ ++if test "$DOCBOOK2MAN" != "no"; then ++ HAVE_DOCBOOK2MAN_TRUE= ++ HAVE_DOCBOOK2MAN_FALSE='#' ++else ++ HAVE_DOCBOOK2MAN_TRUE='#' ++ HAVE_DOCBOOK2MAN_FALSE= ++fi ++ ++ ++ ++# Check whether --enable-more-warnings was given. ++if test "${enable_more_warnings+set}" = set; then ++ enableval=$enable_more_warnings; set_more_warnings="$enableval" ++else ++ ++if test -d $srcdir/CVS; then ++ is_cvs_version=true ++ set_more_warnings=yes ++else ++ set_more_warnings=no ++fi ++ ++fi ++ ++{ echo "$as_me:$LINENO: checking for more warnings" >&5 ++echo $ECHO_N "checking for more warnings... $ECHO_C" >&6; } ++if test "$GCC" = "yes" -a "$set_more_warnings" != "no"; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ CFLAGS="\ ++ -Wall \ ++ -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes \ ++ -Wnested-externs -Wpointer-arith \ ++ -Wcast-align -Wsign-compare \ ++ $CFLAGS" ++ ++ for option in -Wno-strict-aliasing -Wno-sign-compare; do ++ SAVE_CFLAGS="$CFLAGS" ++ CFLAGS="$CFLAGS $option" ++ { echo "$as_me:$LINENO: checking whether gcc understands $option" >&5 ++echo $ECHO_N "checking whether gcc understands $option... $ECHO_C" >&6; } ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ has_option=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ has_option=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ if test $has_option = no; then ++ CFLAGS="$SAVE_CFLAGS" ++ fi ++ { echo "$as_me:$LINENO: result: $has_option" >&5 ++echo "${ECHO_T}$has_option" >&6; } ++ unset has_option ++ unset SAVE_CFLAGS ++ done ++ unset option ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ac_config_files="$ac_config_files Makefile src/Makefile src/dbus/Makefile applets/Makefile applets/brightness/Makefile applets/inhibit/Makefile libhal-glib/Makefile libdbus-glib/Makefile libidletime/Makefile libunique/Makefile docs/Makefile man/Makefile help/Makefile po/Makefile.in tools/Makefile test/Makefile data/Makefile data/gnome-power-manager.desktop.in data/gnome-power-preferences.desktop.in data/gnome-power-statistics.desktop.in data/sounds/Makefile data/icons/Makefile data/icons/16x16/Makefile data/icons/16x16/actions/Makefile data/icons/16x16/apps/Makefile data/icons/16x16/status/Makefile data/icons/22x22/Makefile data/icons/22x22/actions/Makefile data/icons/22x22/apps/Makefile data/icons/22x22/status/Makefile data/icons/24x24/Makefile data/icons/24x24/actions/Makefile data/icons/24x24/apps/Makefile data/icons/24x24/status/Makefile data/icons/48x48/Makefile data/icons/48x48/actions/Makefile data/icons/48x48/apps/Makefile data/icons/48x48/status/Makefile data/icons/scalable/Makefile data/icons/scalable/actions/Makefile data/icons/scalable/apps/Makefile data/icons/scalable/status/Makefile" ++ ++ ++cat >confcache <<\_ACEOF ++# This file is a shell script that caches the results of configure ++# tests run on this system so they can be shared between configure ++# scripts and configure runs, see configure's option --config-cache. ++# It is not useful on other systems. If it contains results you don't ++# want to keep, you may remove or edit it. ++# ++# config.status only pays attention to the cache file if you give it ++# the --recheck option to rerun configure. ++# ++# `ac_cv_env_foo' variables (set or unset) will be overridden when ++# loading this file, other *unset* `ac_cv_foo' will be assigned the ++# following values. ++ ++_ACEOF ++ ++# The following way of writing the cache mishandles newlines in values, ++# but we know of no workaround that is simple, portable, and efficient. ++# So, we kill variables containing newlines. ++# Ultrix sh set writes to stderr and can't be redirected directly, ++# and sets the high bit in the cache file unless we assign to the vars. ++( ++ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ *) $as_unset $ac_var ;; ++ esac ;; ++ esac ++ done ++ ++ (set) 2>&1 | ++ case $as_nl`(ac_space=' '; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) ++ # `set' does not quote correctly, so add quotes (double-quote ++ # substitution turns \\\\ into \\, and sed turns \\ into \). ++ sed -n \ ++ "s/'/'\\\\''/g; ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ++ ;; #( ++ *) ++ # `set' quotes correctly as required by POSIX, so do not add quotes. ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ++ ;; ++ esac | ++ sort ++) | ++ sed ' ++ /^ac_cv_env_/b end ++ t clear ++ :clear ++ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ ++ t end ++ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ ++ :end' >>confcache ++if diff "$cache_file" confcache >/dev/null 2>&1; then :; else ++ if test -w "$cache_file"; then ++ test "x$cache_file" != "x/dev/null" && ++ { echo "$as_me:$LINENO: updating cache $cache_file" >&5 ++echo "$as_me: updating cache $cache_file" >&6;} ++ cat confcache >$cache_file ++ else ++ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 ++echo "$as_me: not updating unwritable cache $cache_file" >&6;} ++ fi ++fi ++rm -f confcache ++ ++test "x$prefix" = xNONE && prefix=$ac_default_prefix ++# Let make expand exec_prefix. ++test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' ++ ++DEFS=-DHAVE_CONFIG_H ++ ++ac_libobjs= ++ac_ltlibobjs= ++for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue ++ # 1. Remove the extension, and $U if already installed. ++ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ++ ac_i=`echo "$ac_i" | sed "$ac_script"` ++ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR ++ # will be set to the directory where LIBOBJS objects are built. ++ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" ++ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' ++done ++LIBOBJS=$ac_libobjs + +- test -z "$ac_cv_path_XMLTO" && ac_cv_path_XMLTO="no" +- ;; +-esac ++LTLIBOBJS=$ac_ltlibobjs ++ ++ ++if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"AMDEP\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } + fi +-XMLTO=$ac_cv_path_XMLTO +-if test -n "$XMLTO"; then +- { echo "$as_me:$LINENO: result: $XMLTO" >&5 +-echo "${ECHO_T}$XMLTO" >&6; } +-else +- { echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6; } ++if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } + fi + ++ ac_config_commands="$ac_config_commands po/stamp-it" + +-{ echo "$as_me:$LINENO: checking whether to build DocBook documentation" >&5 +-echo $ECHO_N "checking whether to build DocBook documentation... $ECHO_C" >&6; } +-if test x$XMLTO = xno ; then +- have_docbook=no +-else +- have_docbook=yes ++ ++if test -z "${ENABLE_SK_TRUE}" && test -z "${ENABLE_SK_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"ENABLE_SK\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"ENABLE_SK\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } + fi +-if test x$enable_docbook_docs = xauto ; then +- if test x$have_docbook = xno ; then +- enable_docbook_docs=no +- else +- enable_docbook_docs=yes +- fi ++if test -z "${HAVE_GNOME_DOC_UTILS_TRUE}" && test -z "${HAVE_GNOME_DOC_UTILS_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_GNOME_DOC_UTILS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"HAVE_GNOME_DOC_UTILS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } + fi +-if test x$enable_docbook_docs = xyes; then +- if test x$have_docbook = xno; then +- { { echo "$as_me:$LINENO: error: Building DocBook docs explicitly required, but DocBook not found" >&5 +-echo "$as_me: error: Building DocBook docs explicitly required, but DocBook not found" >&2;} ++if test -z "${GCONF_SCHEMAS_INSTALL_TRUE}" && test -z "${GCONF_SCHEMAS_INSTALL_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"GCONF_SCHEMAS_INSTALL\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"GCONF_SCHEMAS_INSTALL\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +- fi + fi +- if test x$enable_docbook_docs = xyes; then +- DOCBOOK_DOCS_ENABLED_TRUE= +- DOCBOOK_DOCS_ENABLED_FALSE='#' +-else +- DOCBOOK_DOCS_ENABLED_TRUE='#' +- DOCBOOK_DOCS_ENABLED_FALSE= ++if test -z "${HAVE_TESTS_TRUE}" && test -z "${HAVE_TESTS_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_TESTS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"HAVE_TESTS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } + fi +- +-{ echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6; } +- +- +-# Check whether --with-dbus-services was given. +-if test "${with_dbus_services+set}" = set; then +- withval=$with_dbus_services; ++if test -z "${HAVE_GCONF_DEFAULTS_TRUE}" && test -z "${HAVE_GCONF_DEFAULTS_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_GCONF_DEFAULTS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"HAVE_GCONF_DEFAULTS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } + fi +- +- +-if ! test -z "$with_dbus_services" ; then +- DBUS_SERVICES_DIR="$with_dbus_services" +-else +- # D-BUS 0.23 and higher use $prefix/share/dbus-1/services +- DBUS_SERVICES_DIR="$DATADIR/dbus-1/services" ++if test -z "${HAVE_APPLETS_TRUE}" && test -z "${HAVE_APPLETS_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_APPLETS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"HAVE_APPLETS\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } + fi +- +- +-if $PKG_CONFIG --atleast-version $LIBNOTIFY_REQUIRED libnotify; then +- have_libnotify=yes +- +-pkg_failed=no +-{ echo "$as_me:$LINENO: checking for LIBNOTIFY" >&5 +-echo $ECHO_N "checking for LIBNOTIFY... $ECHO_C" >&6; } +- +-if test -n "$LIBNOTIFY_CFLAGS"; then +- pkg_cv_LIBNOTIFY_CFLAGS="$LIBNOTIFY_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libnotify >= \$LIBNOTIFY_REQUIRED\"") >&5 +- ($PKG_CONFIG --exists --print-errors "libnotify >= $LIBNOTIFY_REQUIRED") 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_LIBNOTIFY_CFLAGS=`$PKG_CONFIG --cflags "libnotify >= $LIBNOTIFY_REQUIRED" 2>/dev/null` +-else +- pkg_failed=yes ++if test -z "${DOCBOOK_DOCS_ENABLED_TRUE}" && test -z "${DOCBOOK_DOCS_ENABLED_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"DOCBOOK_DOCS_ENABLED\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"DOCBOOK_DOCS_ENABLED\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } + fi +- else +- pkg_failed=untried ++if test -z "${HAVE_LIBNOTIFY_TRUE}" && test -z "${HAVE_LIBNOTIFY_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_LIBNOTIFY\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"HAVE_LIBNOTIFY\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } + fi +-if test -n "$LIBNOTIFY_LIBS"; then +- pkg_cv_LIBNOTIFY_LIBS="$LIBNOTIFY_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libnotify >= \$LIBNOTIFY_REQUIRED\"") >&5 +- ($PKG_CONFIG --exists --print-errors "libnotify >= $LIBNOTIFY_REQUIRED") 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_LIBNOTIFY_LIBS=`$PKG_CONFIG --libs "libnotify >= $LIBNOTIFY_REQUIRED" 2>/dev/null` +-else +- pkg_failed=yes ++if test -z "${HAVE_UNIQUE_TRUE}" && test -z "${HAVE_UNIQUE_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_UNIQUE\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"HAVE_UNIQUE\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } + fi +- else +- pkg_failed=untried ++if test -z "${HAVE_DOCBOOK2MAN_TRUE}" && test -z "${HAVE_DOCBOOK2MAN_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_DOCBOOK2MAN\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"HAVE_DOCBOOK2MAN\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } + fi + ++: ${CONFIG_STATUS=./config.status} ++ac_clean_files_save=$ac_clean_files ++ac_clean_files="$ac_clean_files $CONFIG_STATUS" ++{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 ++echo "$as_me: creating $CONFIG_STATUS" >&6;} ++cat >$CONFIG_STATUS <<_ACEOF ++#! $SHELL ++# Generated by $as_me. ++# Run this file to recreate the current configuration. ++# Compiler output produced by configure, useful for debugging ++# configure, is in config.log if it exists. + ++debug=false ++ac_cs_recheck=false ++ac_cs_silent=false ++SHELL=\${CONFIG_SHELL-$SHELL} ++_ACEOF + +-if test $pkg_failed = yes; then ++cat >>$CONFIG_STATUS <<\_ACEOF ++## --------------------- ## ++## M4sh Initialization. ## ++## --------------------- ## + +-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then +- _pkg_short_errors_supported=yes ++# Be more Bourne compatible ++DUALCASE=1; export DUALCASE # for MKS sh ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST + else +- _pkg_short_errors_supported=no +-fi +- if test $_pkg_short_errors_supported = yes; then +- LIBNOTIFY_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "libnotify >= $LIBNOTIFY_REQUIRED" 2>&1` +- else +- LIBNOTIFY_PKG_ERRORS=`$PKG_CONFIG --print-errors "libnotify >= $LIBNOTIFY_REQUIRED" 2>&1` +- fi +- # Put the nasty error message in config.log where it belongs +- echo "$LIBNOTIFY_PKG_ERRORS" >&5 +- +- { { echo "$as_me:$LINENO: error: Package requirements (libnotify >= $LIBNOTIFY_REQUIRED) were not met: +- +-$LIBNOTIFY_PKG_ERRORS +- +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. +- +-Alternatively, you may set the environment variables LIBNOTIFY_CFLAGS +-and LIBNOTIFY_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&5 +-echo "$as_me: error: Package requirements (libnotify >= $LIBNOTIFY_REQUIRED) were not met: ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac + +-$LIBNOTIFY_PKG_ERRORS ++fi + +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. + +-Alternatively, you may set the environment variables LIBNOTIFY_CFLAGS +-and LIBNOTIFY_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&2;} +- { (exit 1); exit 1; }; } +-elif test $pkg_failed = untried; then +- { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. + +-Alternatively, you may set the environment variables LIBNOTIFY_CFLAGS +-and LIBNOTIFY_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. + +-To get pkg-config, see . +-See \`config.log' for more details." >&5 +-echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. ++# PATH needs CR ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits + +-Alternatively, you may set the environment variables LIBNOTIFY_CFLAGS +-and LIBNOTIFY_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ echo "#! /bin/sh" >conf$$.sh ++ echo "exit 0" >>conf$$.sh ++ chmod +x conf$$.sh ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then ++ PATH_SEPARATOR=';' ++ else ++ PATH_SEPARATOR=: ++ fi ++ rm -f conf$$.sh ++fi + +-To get pkg-config, see . +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } ++# Support unset when possible. ++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then ++ as_unset=unset + else +- LIBNOTIFY_CFLAGS=$pkg_cv_LIBNOTIFY_CFLAGS +- LIBNOTIFY_LIBS=$pkg_cv_LIBNOTIFY_LIBS +- { echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6; } +- : ++ as_unset=false + fi + + ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++as_nl=' ++' ++IFS=" "" $as_nl" + +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_LIBNOTIFY 1 +-_ACEOF ++# Find who we are. Look in the path if we contain no directory separator. ++case $0 in ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++done ++IFS=$as_save_IFS + +-else +- have_libnotify=no ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 + fi +- if test $have_libnotify = yes; then +- HAVE_LIBNOTIFY_TRUE= +- HAVE_LIBNOTIFY_FALSE='#' +-else +- HAVE_LIBNOTIFY_TRUE='#' +- HAVE_LIBNOTIFY_FALSE= ++if test ! -f "$as_myself"; then ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ { (exit 1); exit 1; } + fi + ++# Work around bugs in pre-3.0 UWIN ksh. ++for as_var in ENV MAIL MAILPATH ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++done ++PS1='$ ' ++PS2='> ' ++PS4='+ ' + +-if $PKG_CONFIG --atleast-version $UNIQUE_REQUIRED unique-1.0; then +- have_unique=yes +- +-pkg_failed=no +-{ echo "$as_me:$LINENO: checking for UNIQUE" >&5 +-echo $ECHO_N "checking for UNIQUE... $ECHO_C" >&6; } ++# NLS nuisances. ++for as_var in \ ++ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ ++ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ ++ LC_TELEPHONE LC_TIME ++do ++ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then ++ eval $as_var=C; export $as_var ++ else ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++ fi ++done + +-if test -n "$UNIQUE_CFLAGS"; then +- pkg_cv_UNIQUE_CFLAGS="$UNIQUE_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"unique-1.0 >= \$UNIQUE_REQUIRED\"") >&5 +- ($PKG_CONFIG --exists --print-errors "unique-1.0 >= $UNIQUE_REQUIRED") 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_UNIQUE_CFLAGS=`$PKG_CONFIG --cflags "unique-1.0 >= $UNIQUE_REQUIRED" 2>/dev/null` +-else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried +-fi +-if test -n "$UNIQUE_LIBS"; then +- pkg_cv_UNIQUE_LIBS="$UNIQUE_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"unique-1.0 >= \$UNIQUE_REQUIRED\"") >&5 +- ($PKG_CONFIG --exists --print-errors "unique-1.0 >= $UNIQUE_REQUIRED") 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_UNIQUE_LIBS=`$PKG_CONFIG --libs "unique-1.0 >= $UNIQUE_REQUIRED" 2>/dev/null` ++# Required to use basename. ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then ++ as_expr=expr + else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried ++ as_expr=false + fi + +- +- +-if test $pkg_failed = yes; then +- +-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then +- _pkg_short_errors_supported=yes ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then ++ as_basename=basename + else +- _pkg_short_errors_supported=no ++ as_basename=false + fi +- if test $_pkg_short_errors_supported = yes; then +- UNIQUE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "unique-1.0 >= $UNIQUE_REQUIRED" 2>&1` +- else +- UNIQUE_PKG_ERRORS=`$PKG_CONFIG --print-errors "unique-1.0 >= $UNIQUE_REQUIRED" 2>&1` +- fi +- # Put the nasty error message in config.log where it belongs +- echo "$UNIQUE_PKG_ERRORS" >&5 + +- { { echo "$as_me:$LINENO: error: Package requirements (unique-1.0 >= $UNIQUE_REQUIRED) were not met: + +-$UNIQUE_PKG_ERRORS ++# Name of the executable. ++as_me=`$as_basename -- "$0" || ++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ ++ X"$0" : 'X\(//\)$' \| \ ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || ++echo X/"$0" | ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. ++# CDPATH. ++$as_unset CDPATH + +-Alternatively, you may set the environment variables UNIQUE_CFLAGS +-and UNIQUE_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&5 +-echo "$as_me: error: Package requirements (unique-1.0 >= $UNIQUE_REQUIRED) were not met: + +-$UNIQUE_PKG_ERRORS + +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. ++ as_lineno_1=$LINENO ++ as_lineno_2=$LINENO ++ test "x$as_lineno_1" != "x$as_lineno_2" && ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + +-Alternatively, you may set the environment variables UNIQUE_CFLAGS +-and UNIQUE_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&2;} ++ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO ++ # uniformly replaced by the line number. The first 'sed' inserts a ++ # line-number line after each line using $LINENO; the second 'sed' ++ # does the real work. The second script uses 'N' to pair each ++ # line-number line with the line containing $LINENO, and appends ++ # trailing '-' during substitution so that $LINENO is not a special ++ # case at line end. ++ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the ++ # scripts with optimization help from Paolo Bonzini. Blame Lee ++ # E. McMahon (1931-1989) for sed's syntax. :-) ++ sed -n ' ++ p ++ /[$]LINENO/= ++ ' <$as_myself | ++ sed ' ++ s/[$]LINENO.*/&-/ ++ t lineno ++ b ++ :lineno ++ N ++ :loop ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ ++ t loop ++ s/-\n.*// ++ ' >$as_me.lineno && ++ chmod +x "$as_me.lineno" || ++ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } +-elif test $pkg_failed = untried; then +- { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. +- +-Alternatively, you may set the environment variables UNIQUE_CFLAGS +-and UNIQUE_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. + +-To get pkg-config, see . +-See \`config.log' for more details." >&5 +-echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. ++ # Don't try to exec as it changes $[0], causing all sort of problems ++ # (the dirname of $[0] is not the place where we might find the ++ # original and so on. Autoconf is especially sensitive to this). ++ . "./$as_me.lineno" ++ # Exit status is that of the last command. ++ exit ++} + +-Alternatively, you may set the environment variables UNIQUE_CFLAGS +-and UNIQUE_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. + +-To get pkg-config, see . +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname + else +- UNIQUE_CFLAGS=$pkg_cv_UNIQUE_CFLAGS +- UNIQUE_LIBS=$pkg_cv_UNIQUE_LIBS +- { echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6; } +- : ++ as_dirname=false + fi + ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in ++-n*) ++ case `echo 'x\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ *) ECHO_C='\c';; ++ esac;; ++*) ++ ECHO_N='-n';; ++esac + ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then ++ as_expr=expr ++else ++ as_expr=false ++fi + +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_UNIQUE 1 +-_ACEOF +- ++rm -f conf$$ conf$$.exe conf$$.file ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file ++else ++ rm -f conf$$.dir ++ mkdir conf$$.dir ++fi ++echo >conf$$.file ++if ln -s conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || ++ as_ln_s='cp -p' ++elif ln conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s=ln + else +- have_unique=no +- +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_UNIQUE 0 +-_ACEOF +- ++ as_ln_s='cp -p' + fi +- if test $have_unique = yes; then +- HAVE_UNIQUE_TRUE= +- HAVE_UNIQUE_FALSE='#' ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null ++ ++if mkdir -p . 2>/dev/null; then ++ as_mkdir_p=: + else +- HAVE_UNIQUE_TRUE='#' +- HAVE_UNIQUE_FALSE= ++ test -d ./-p && rmdir ./-p ++ as_mkdir_p=false + fi + ++if test -x / >/dev/null 2>&1; then ++ as_test_x='test -x' ++else ++ if ls -dL / >/dev/null 2>&1; then ++ as_ls_L_option=L ++ else ++ as_ls_L_option= ++ fi ++ as_test_x=' ++ eval sh -c '\'' ++ if test -d "$1"; then ++ test -d "$1/."; ++ else ++ case $1 in ++ -*)set "./$1";; ++ esac; ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ++ ???[sx]*):;;*)false;;esac;fi ++ '\'' sh ++ ' ++fi ++as_executable_p=$as_test_x + ++# Sed expression to map a string onto a valid CPP name. ++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +-# Like AC_CHECK_HEADER, but it uses the already-computed -I directories. +-# +- +- +-# Like AC_TRY_COMPILE, but it uses the already-computed -I directories. +-# +- +- +- +-# Like AC_CHECK_LIB, but it uses the already-computed -I and -L directories. +-# Use this sparingly; it probably doesn't work very well on X programs. +-# +- +- +- +-# Usage: HANDLE_X_PATH_ARG([variable_name], +-# [--command-line-option], +-# [descriptive string]) +-# +-# All of the --with options take three forms: +-# +-# --with-foo (or --with-foo=yes) +-# --without-foo (or --with-foo=no) +-# --with-foo=/DIR +-# +-# This function, HANDLE_X_PATH_ARG, deals with the /DIR case. When it sees +-# a directory (string beginning with a slash) it checks to see whether +-# /DIR/include and /DIR/lib exist, and adds them to $X_CFLAGS and $X_LIBS +-# as appropriate. +-# +- +- ++# Sed expression to map a string onto a valid variable name. ++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +-have_dpms=no +-with_dpms_req=unspecified +-GPM_EXTRA_LIBS="-lresolv" ++exec 6>&1 + ++# Save the log message, to keep $[0] and so on meaningful, and to ++# report actual input values of CONFIG_FILES etc. instead of their ++# values after options handling. ++ac_log=" ++This file was extended by gnome-power-manager $as_me 2.24.0, which was ++generated by GNU Autoconf 2.61. Invocation command line was + +-# Check whether --with-dpms-ext was given. +-if test "${with_dpms_ext+set}" = set; then +- withval=$with_dpms_ext; with_dpms="$withval"; with_dpms_req="$withval" +-else +- with_dpms=yes +-fi ++ CONFIG_FILES = $CONFIG_FILES ++ CONFIG_HEADERS = $CONFIG_HEADERS ++ CONFIG_LINKS = $CONFIG_LINKS ++ CONFIG_COMMANDS = $CONFIG_COMMANDS ++ $ $0 $@ + ++on `(hostname || uname -n) 2>/dev/null | sed 1q` ++" + ++_ACEOF + +- case "$with_dpms" in +- yes) ;; +- no) ;; ++cat >>$CONFIG_STATUS <<_ACEOF ++# Files that config.status was made for. ++config_files="$ac_config_files" ++config_headers="$ac_config_headers" ++config_commands="$ac_config_commands" + +- /*) +- { echo "$as_me:$LINENO: checking for DPMS headers" >&5 +-echo $ECHO_N "checking for DPMS headers... $ECHO_C" >&6; } +- d=$with_dpms/include +- if test -d $d; then +- X_CFLAGS="-I$d $X_CFLAGS" +- { echo "$as_me:$LINENO: result: $d" >&5 +-echo "${ECHO_T}$d" >&6; } +- else +- { echo "$as_me:$LINENO: result: not found ($d: no such directory)" >&5 +-echo "${ECHO_T}not found ($d: no such directory)" >&6; } +- fi ++_ACEOF + +- { echo "$as_me:$LINENO: checking for DPMS libs" >&5 +-echo $ECHO_N "checking for DPMS libs... $ECHO_C" >&6; } +- d=$with_dpms/lib +- if test -d $d; then +- X_LIBS="-L$d $X_LIBS" +- { echo "$as_me:$LINENO: result: $d" >&5 +-echo "${ECHO_T}$d" >&6; } +- else +- { echo "$as_me:$LINENO: result: not found ($d: no such directory)" >&5 +-echo "${ECHO_T}not found ($d: no such directory)" >&6; } +- fi ++cat >>$CONFIG_STATUS <<\_ACEOF ++ac_cs_usage="\ ++\`$as_me' instantiates files from templates according to the ++current configuration. + +- # replace the directory string with "yes". +- with_dpms_req="yes" +- with_dpms=$with_dpms_req +- ;; ++Usage: $0 [OPTIONS] [FILE]... + +- *) +- echo "" +- echo "error: argument to --with-dpms-ext must be \"yes\", \"no\", or a directory." +- echo " If it is a directory, then \`DIR/include' will be added to" +- echo " the -I list, and \`DIR/lib' will be added to the -L list." +- exit 1 +- ;; +- esac ++ -h, --help print this help, then exit ++ -V, --version print version number and configuration settings, then exit ++ -q, --quiet do not print progress messages ++ -d, --debug don't remove temporary files ++ --recheck update $as_me by reconfiguring in the same conditions ++ --file=FILE[:TEMPLATE] ++ instantiate the configuration file FILE ++ --header=FILE[:TEMPLATE] ++ instantiate the configuration header FILE + ++Configuration files: ++$config_files + +-if test "$with_dpms" = yes; then ++Configuration headers: ++$config_headers + +- # first check for dpms.h ++Configuration commands: ++$config_commands + +- ac_save_CPPFLAGS="$CPPFLAGS" +- if test \! -z "$includedir" ; then +- CPPFLAGS="$CPPFLAGS -I$includedir" +- fi +- CPPFLAGS="$CPPFLAGS $X_CFLAGS" +- { echo "$as_me:$LINENO: checking for X11/extensions/dpms.h" >&5 +-echo $ECHO_N "checking for X11/extensions/dpms.h... $ECHO_C" >&6; } +-if test "${ac_cv_header_X11_extensions_dpms_h+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include +- #include ++Report bugs to ." + +-#include + _ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_cv_header_X11_extensions_dpms_h=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++cat >>$CONFIG_STATUS <<_ACEOF ++ac_cs_version="\\ ++gnome-power-manager config.status 2.24.0 ++configured by $0, generated by GNU Autoconf 2.61, ++ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" + +- ac_cv_header_X11_extensions_dpms_h=no +-fi ++Copyright (C) 2006 Free Software Foundation, Inc. ++This config.status script is free software; the Free Software Foundation ++gives unlimited permission to copy, distribute and modify it." + +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-fi +-{ echo "$as_me:$LINENO: result: $ac_cv_header_X11_extensions_dpms_h" >&5 +-echo "${ECHO_T}$ac_cv_header_X11_extensions_dpms_h" >&6; } +-if test $ac_cv_header_X11_extensions_dpms_h = yes; then +- have_dpms=yes +-fi ++ac_pwd='$ac_pwd' ++srcdir='$srcdir' ++INSTALL='$INSTALL' ++_ACEOF + ++cat >>$CONFIG_STATUS <<\_ACEOF ++# If no file are specified by the user, then we need to provide default ++# value. By we need to know if files were specified by the user. ++ac_need_defaults=: ++while test $# != 0 ++do ++ case $1 in ++ --*=*) ++ ac_option=`expr "X$1" : 'X\([^=]*\)='` ++ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ++ ac_shift=: ++ ;; ++ *) ++ ac_option=$1 ++ ac_optarg=$2 ++ ac_shift=shift ++ ;; ++ esac + +- CPPFLAGS="$ac_save_CPPFLAGS" ++ case $ac_option in ++ # Handling of the options. ++ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ++ ac_cs_recheck=: ;; ++ --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) ++ echo "$ac_cs_version"; exit ;; ++ --debug | --debu | --deb | --de | --d | -d ) ++ debug=: ;; ++ --file | --fil | --fi | --f ) ++ $ac_shift ++ CONFIG_FILES="$CONFIG_FILES $ac_optarg" ++ ac_need_defaults=false;; ++ --header | --heade | --head | --hea ) ++ $ac_shift ++ CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" ++ ac_need_defaults=false;; ++ --he | --h) ++ # Conflict between --help and --header ++ { echo "$as_me: error: ambiguous option: $1 ++Try \`$0 --help' for more information." >&2 ++ { (exit 1); exit 1; }; };; ++ --help | --hel | -h ) ++ echo "$ac_cs_usage"; exit ;; ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ++ | -silent | --silent | --silen | --sile | --sil | --si | --s) ++ ac_cs_silent=: ;; + +- # if that succeeded, then check for the DPMS code in the libraries +- if test "$have_dpms" = yes; then ++ # This is an error. ++ -*) { echo "$as_me: error: unrecognized option: $1 ++Try \`$0 --help' for more information." >&2 ++ { (exit 1); exit 1; }; } ;; + +- # first look in -lXext (this is where it is with XFree86 4.0) +- have_dpms=no ++ *) ac_config_targets="$ac_config_targets $1" ++ ac_need_defaults=false ;; + +- ac_save_CPPFLAGS="$CPPFLAGS" +- ac_save_LDFLAGS="$LDFLAGS" +-# ac_save_LIBS="$LIBS" ++ esac ++ shift ++done + +- if test \! -z "$includedir" ; then +- CPPFLAGS="$CPPFLAGS -I$includedir" +- fi +- # note: $X_CFLAGS includes $x_includes +- CPPFLAGS="$CPPFLAGS $X_CFLAGS" ++ac_configure_extra_args= + +- if test \! -z "$libdir" ; then +- LDFLAGS="$LDFLAGS -L$libdir" +- fi +- # note: $X_LIBS includes $x_libraries +- LDFLAGS="$LDFLAGS $ALL_X_LIBS" ++if $ac_cs_silent; then ++ exec 6>/dev/null ++ ac_configure_extra_args="$ac_configure_extra_args --silent" ++fi + +- { echo "$as_me:$LINENO: checking for DPMSInfo in -lXext" >&5 +-echo $ECHO_N "checking for DPMSInfo in -lXext... $ECHO_C" >&6; } +-if test "${ac_cv_lib_Xext_DPMSInfo+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lXext -lXext -lX11 $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ + _ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ ++cat >>$CONFIG_STATUS <<_ACEOF ++if \$ac_cs_recheck; then ++ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 ++ CONFIG_SHELL=$SHELL ++ export CONFIG_SHELL ++ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion ++fi + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char DPMSInfo (); +-int +-main () ++_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF ++exec 5>>config.log + { +-return DPMSInfo (); +- ; +- return 0; +-} ++ echo ++ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ++## Running $as_me. ## ++_ASBOX ++ echo "$ac_log" ++} >&5 ++ + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- ac_cv_lib_Xext_DPMSInfo=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++cat >>$CONFIG_STATUS <<_ACEOF ++# ++# INIT-COMMANDS ++# ++AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" + +- ac_cv_lib_Xext_DPMSInfo=no +-fi + +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-{ echo "$as_me:$LINENO: result: $ac_cv_lib_Xext_DPMSInfo" >&5 +-echo "${ECHO_T}$ac_cv_lib_Xext_DPMSInfo" >&6; } +-if test $ac_cv_lib_Xext_DPMSInfo = yes; then +- have_dpms=yes +-else +- true +-fi ++# The HP-UX ksh and POSIX shell print the target directory to stdout ++# if CDPATH is set. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +- CPPFLAGS="$ac_save_CPPFLAGS" +- LDFLAGS="$ac_save_LDFLAGS" +-# LIBS="$ac_save_LIBS" ++sed_quote_subst='$sed_quote_subst' ++double_quote_subst='$double_quote_subst' ++delay_variable_subst='$delay_variable_subst' ++macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`' ++macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`' ++enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`' ++enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`' ++pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`' ++enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`' ++host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`' ++host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`' ++host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`' ++build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`' ++build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`' ++build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`' ++SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`' ++Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`' ++GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`' ++EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`' ++FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`' ++LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`' ++NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`' ++LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`' ++max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`' ++ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`' ++exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`' ++lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`' ++lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`' ++lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`' ++reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`' ++reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`' ++file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`' ++AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`' ++AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`' ++STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`' ++RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`' ++old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`' ++CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`' ++compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`' ++GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' ++objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`' ++SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`' ++ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`' ++MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`' ++lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`' ++lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`' ++lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`' ++lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`' ++need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`' ++DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`' ++NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`' ++LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`' ++OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`' ++OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`' ++libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`' ++shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`' ++enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`' ++export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' ++whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' ++compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`' ++old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`' ++allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' ++no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`' ++inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`' ++link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`' ++fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`' ++always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`' ++export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`' ++include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`' ++prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`' ++variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`' ++need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' ++need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`' ++version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`' ++runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`' ++shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' ++shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`' ++libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`' ++library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`' ++soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`' ++postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`' ++sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`' ++sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`' ++enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`' ++enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`' ++enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`' ++old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`' ++striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`' ++ ++LTCC='$LTCC' ++LTCFLAGS='$LTCFLAGS' ++compiler='$compiler_DEFAULT' ++ ++# Quote evaled strings. ++for var in SED \ ++GREP \ ++EGREP \ ++FGREP \ ++LD \ ++NM \ ++LN_S \ ++lt_SP2NL \ ++lt_NL2SP \ ++reload_flag \ ++deplibs_check_method \ ++file_magic_cmd \ ++AR \ ++AR_FLAGS \ ++STRIP \ ++RANLIB \ ++CC \ ++CFLAGS \ ++compiler \ ++lt_cv_sys_global_symbol_pipe \ ++lt_cv_sys_global_symbol_to_cdecl \ ++lt_cv_sys_global_symbol_to_c_name_address \ ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ ++SHELL \ ++ECHO \ ++lt_prog_compiler_no_builtin_flag \ ++lt_prog_compiler_wl \ ++lt_prog_compiler_pic \ ++lt_prog_compiler_static \ ++lt_cv_prog_compiler_c_o \ ++need_locks \ ++DSYMUTIL \ ++NMEDIT \ ++LIPO \ ++OTOOL \ ++OTOOL64 \ ++shrext_cmds \ ++export_dynamic_flag_spec \ ++whole_archive_flag_spec \ ++compiler_needs_object \ ++with_gnu_ld \ ++allow_undefined_flag \ ++no_undefined_flag \ ++hardcode_libdir_flag_spec \ ++hardcode_libdir_flag_spec_ld \ ++hardcode_libdir_separator \ ++fix_srcfile_path \ ++exclude_expsyms \ ++include_expsyms \ ++file_list_spec \ ++variables_saved_for_relink \ ++libname_spec \ ++library_names_spec \ ++soname_spec \ ++finish_eval \ ++old_striplib \ ++striplib; do ++ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in ++ *[\\\\\\\`\\"\\\$]*) ++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ++ ;; ++ *) ++ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ++ ;; ++ esac ++done + ++# Double-quote double-evaled strings. ++for var in reload_cmds \ ++old_postinstall_cmds \ ++old_postuninstall_cmds \ ++old_archive_cmds \ ++extract_expsyms_cmds \ ++old_archive_from_new_cmds \ ++old_archive_from_expsyms_cmds \ ++archive_cmds \ ++archive_expsym_cmds \ ++module_cmds \ ++module_expsym_cmds \ ++export_symbols_cmds \ ++prelink_cmds \ ++postinstall_cmds \ ++postuninstall_cmds \ ++finish_cmds \ ++sys_lib_search_path_spec \ ++sys_lib_dlsearch_path_spec; do ++ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in ++ *[\\\\\\\`\\"\\\$]*) ++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ++ ;; ++ *) ++ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ++ ;; ++ esac ++done + +- # if that failed, look in -lXdpms (this is where it was in XFree86 3.x) +- if test "$have_dpms" = no; then ++# Fix-up fallback echo if it was mangled by the above quoting rules. ++case \$lt_ECHO in ++*'\\\$0 --fallback-echo"') lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\` ++ ;; ++esac + +- ac_save_CPPFLAGS="$CPPFLAGS" +- ac_save_LDFLAGS="$LDFLAGS" +-# ac_save_LIBS="$LIBS" ++ac_aux_dir='$ac_aux_dir' ++xsi_shell='$xsi_shell' ++lt_shell_append='$lt_shell_append' + +- if test \! -z "$includedir" ; then +- CPPFLAGS="$CPPFLAGS -I$includedir" +- fi +- # note: $X_CFLAGS includes $x_includes +- CPPFLAGS="$CPPFLAGS $X_CFLAGS" ++# See if we are running on zsh, and set the options which allow our ++# commands through without removal of \ escapes INIT. ++if test -n "\${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++fi + +- if test \! -z "$libdir" ; then +- LDFLAGS="$LDFLAGS -L$libdir" +- fi +- # note: $X_LIBS includes $x_libraries +- LDFLAGS="$LDFLAGS $ALL_X_LIBS" + +- { echo "$as_me:$LINENO: checking for DPMSInfo in -lXdpms" >&5 +-echo $ECHO_N "checking for DPMSInfo in -lXdpms... $ECHO_C" >&6; } +-if test "${ac_cv_lib_Xdpms_DPMSInfo+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lXdpms -lXext -lX11 $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ ++ PACKAGE='$PACKAGE' ++ VERSION='$VERSION' ++ TIMESTAMP='$TIMESTAMP' ++ RM='$RM' ++ ofile='$ofile' + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char DPMSInfo (); +-int +-main () +-{ +-return DPMSInfo (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- ac_cv_lib_Xdpms_DPMSInfo=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_lib_Xdpms_DPMSInfo=no +-fi + +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-{ echo "$as_me:$LINENO: result: $ac_cv_lib_Xdpms_DPMSInfo" >&5 +-echo "${ECHO_T}$ac_cv_lib_Xdpms_DPMSInfo" >&6; } +-if test $ac_cv_lib_Xdpms_DPMSInfo = yes; then +- have_dpms=yes; XDPMS_LIBS="-lXdpms" +-else +- true +-fi ++INTLTOOL_PERL='${INTLTOOL_PERL}' ac_aux_dir='${ac_aux_dir}' ++prefix="$prefix" exec_prefix="$exec_prefix" INTLTOOL_LIBDIR="$libdir" ++INTLTOOL_EXTRACT='${INTLTOOL_EXTRACT}' + +- CPPFLAGS="$ac_save_CPPFLAGS" +- LDFLAGS="$ac_save_LDFLAGS" +-# LIBS="$ac_save_LIBS" + +- fi +- fi ++_ACEOF + ++cat >>$CONFIG_STATUS <<\_ACEOF + +- # if that succeeded, then we've really got it. +- if test "$have_dpms" = yes; then ++# Handling of arguments. ++for ac_config_target in $ac_config_targets ++do ++ case $ac_config_target in ++ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; ++ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; ++ "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; ++ "intltool") CONFIG_COMMANDS="$CONFIG_COMMANDS intltool" ;; ++ "default-1") CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;; ++ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; ++ "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; ++ "src/dbus/Makefile") CONFIG_FILES="$CONFIG_FILES src/dbus/Makefile" ;; ++ "applets/Makefile") CONFIG_FILES="$CONFIG_FILES applets/Makefile" ;; ++ "applets/brightness/Makefile") CONFIG_FILES="$CONFIG_FILES applets/brightness/Makefile" ;; ++ "applets/inhibit/Makefile") CONFIG_FILES="$CONFIG_FILES applets/inhibit/Makefile" ;; ++ "libhal-glib/Makefile") CONFIG_FILES="$CONFIG_FILES libhal-glib/Makefile" ;; ++ "libdbus-glib/Makefile") CONFIG_FILES="$CONFIG_FILES libdbus-glib/Makefile" ;; ++ "libidletime/Makefile") CONFIG_FILES="$CONFIG_FILES libidletime/Makefile" ;; ++ "libunique/Makefile") CONFIG_FILES="$CONFIG_FILES libunique/Makefile" ;; ++ "docs/Makefile") CONFIG_FILES="$CONFIG_FILES docs/Makefile" ;; ++ "man/Makefile") CONFIG_FILES="$CONFIG_FILES man/Makefile" ;; ++ "help/Makefile") CONFIG_FILES="$CONFIG_FILES help/Makefile" ;; ++ "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; ++ "tools/Makefile") CONFIG_FILES="$CONFIG_FILES tools/Makefile" ;; ++ "test/Makefile") CONFIG_FILES="$CONFIG_FILES test/Makefile" ;; ++ "data/Makefile") CONFIG_FILES="$CONFIG_FILES data/Makefile" ;; ++ "data/gnome-power-manager.desktop.in") CONFIG_FILES="$CONFIG_FILES data/gnome-power-manager.desktop.in" ;; ++ "data/gnome-power-preferences.desktop.in") CONFIG_FILES="$CONFIG_FILES data/gnome-power-preferences.desktop.in" ;; ++ "data/gnome-power-statistics.desktop.in") CONFIG_FILES="$CONFIG_FILES data/gnome-power-statistics.desktop.in" ;; ++ "data/sounds/Makefile") CONFIG_FILES="$CONFIG_FILES data/sounds/Makefile" ;; ++ "data/icons/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/Makefile" ;; ++ "data/icons/16x16/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/16x16/Makefile" ;; ++ "data/icons/16x16/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/16x16/actions/Makefile" ;; ++ "data/icons/16x16/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/16x16/apps/Makefile" ;; ++ "data/icons/16x16/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/16x16/status/Makefile" ;; ++ "data/icons/22x22/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/22x22/Makefile" ;; ++ "data/icons/22x22/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/22x22/actions/Makefile" ;; ++ "data/icons/22x22/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/22x22/apps/Makefile" ;; ++ "data/icons/22x22/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/22x22/status/Makefile" ;; ++ "data/icons/24x24/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/24x24/Makefile" ;; ++ "data/icons/24x24/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/24x24/actions/Makefile" ;; ++ "data/icons/24x24/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/24x24/apps/Makefile" ;; ++ "data/icons/24x24/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/24x24/status/Makefile" ;; ++ "data/icons/48x48/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/48x48/Makefile" ;; ++ "data/icons/48x48/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/48x48/actions/Makefile" ;; ++ "data/icons/48x48/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/48x48/apps/Makefile" ;; ++ "data/icons/48x48/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/48x48/status/Makefile" ;; ++ "data/icons/scalable/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/scalable/Makefile" ;; ++ "data/icons/scalable/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/scalable/actions/Makefile" ;; ++ "data/icons/scalable/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/scalable/apps/Makefile" ;; ++ "data/icons/scalable/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/scalable/status/Makefile" ;; ++ "po/stamp-it") CONFIG_COMMANDS="$CONFIG_COMMANDS po/stamp-it" ;; + +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_DPMS_EXTENSION 1 +-_ACEOF ++ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 ++echo "$as_me: error: invalid argument: $ac_config_target" >&2;} ++ { (exit 1); exit 1; }; };; ++ esac ++done + +- GPM_EXTRA_LIBS="$GPM_EXTRA_LIBS -lXext" +- fi + +-elif test "$with_dpms" != no; then +- echo "error: must be yes or no: --with-dpms-ext=$with_dpms" +- exit 1 ++# If the user did not use the arguments to specify the items to instantiate, ++# then the envvar interface is used. Set only those that are not. ++# We use the long form for the default assignment because of an extremely ++# bizarre bug on SunOS 4.1.3. ++if $ac_need_defaults; then ++ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files ++ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers ++ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands + fi + +-{ echo "$as_me:$LINENO: checking for Solaris kstat" >&5 +-echo $ECHO_N "checking for Solaris kstat... $ECHO_C" >&6; } +-{ echo "$as_me:$LINENO: checking for kstat_open in -lkstat" >&5 +-echo $ECHO_N "checking for kstat_open in -lkstat... $ECHO_C" >&6; } +-if test "${ac_cv_lib_kstat_kstat_open+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lkstat $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char kstat_open (); +-int +-main () ++# Have a temporary directory for convenience. Make it in the build tree ++# simply because there is no reason against having it here, and in addition, ++# creating and moving files from /tmp can sometimes cause problems. ++# Hook for its removal unless debugging. ++# Note that there is a small window in which the directory will not be cleaned: ++# after its creation but before its name has been assigned to `$tmp'. ++$debug || + { +-return kstat_open (); +- ; +- return 0; ++ tmp= ++ trap 'exit_status=$? ++ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ++' 0 ++ trap '{ (exit 1); exit 1; }' 1 2 13 15 + } +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- ac_cv_lib_kstat_kstat_open=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++# Create a (secure) tmp directory for tmp files. + +- ac_cv_lib_kstat_kstat_open=no +-fi ++{ ++ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && ++ test -n "$tmp" && test -d "$tmp" ++} || ++{ ++ tmp=./conf$$-$RANDOM ++ (umask 077 && mkdir "$tmp") ++} || ++{ ++ echo "$me: cannot create a temporary directory in ." >&2 ++ { (exit 1); exit 1; } ++} + +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-{ echo "$as_me:$LINENO: result: $ac_cv_lib_kstat_kstat_open" >&5 +-echo "${ECHO_T}$ac_cv_lib_kstat_kstat_open" >&6; } +-if test $ac_cv_lib_kstat_kstat_open = yes; then ++# ++# Set up the sed scripts for CONFIG_FILES section. ++# + ++# No need to generate the scripts if there are no CONFIG_FILES. ++# This happens for instance when ./config.status config.h ++if test -n "$CONFIG_FILES"; then + +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_KSTAT 1 + _ACEOF + +- GPM_EXTRA_LIBS="$GPM_EXTRA_LIBS -lkstat" +- +-fi +- + + +-# Extract the first word of "docbook2man", so it can be a program name with args. +-set dummy docbook2man; ac_word=$2 +-{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +-if test "${ac_cv_path_DOCBOOK2MAN+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- case $DOCBOOK2MAN in +- [\\/]* | ?:[\\/]*) +- ac_cv_path_DOCBOOK2MAN="$DOCBOOK2MAN" # Let the user override the test with a path. +- ;; +- *) +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_path_DOCBOOK2MAN="$as_dir/$ac_word$ac_exec_ext" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ cat >conf$$subs.sed <<_ACEOF ++SHELL!$SHELL$ac_delim ++PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim ++PACKAGE_NAME!$PACKAGE_NAME$ac_delim ++PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim ++PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim ++PACKAGE_STRING!$PACKAGE_STRING$ac_delim ++PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim ++exec_prefix!$exec_prefix$ac_delim ++prefix!$prefix$ac_delim ++program_transform_name!$program_transform_name$ac_delim ++bindir!$bindir$ac_delim ++sbindir!$sbindir$ac_delim ++libexecdir!$libexecdir$ac_delim ++datarootdir!$datarootdir$ac_delim ++datadir!$datadir$ac_delim ++sysconfdir!$sysconfdir$ac_delim ++sharedstatedir!$sharedstatedir$ac_delim ++localstatedir!$localstatedir$ac_delim ++includedir!$includedir$ac_delim ++oldincludedir!$oldincludedir$ac_delim ++docdir!$docdir$ac_delim ++infodir!$infodir$ac_delim ++htmldir!$htmldir$ac_delim ++dvidir!$dvidir$ac_delim ++pdfdir!$pdfdir$ac_delim ++psdir!$psdir$ac_delim ++libdir!$libdir$ac_delim ++localedir!$localedir$ac_delim ++mandir!$mandir$ac_delim ++DEFS!$DEFS$ac_delim ++ECHO_C!$ECHO_C$ac_delim ++ECHO_N!$ECHO_N$ac_delim ++ECHO_T!$ECHO_T$ac_delim ++LIBS!$LIBS$ac_delim ++build_alias!$build_alias$ac_delim ++host_alias!$host_alias$ac_delim ++target_alias!$target_alias$ac_delim ++INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim ++INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim ++INSTALL_DATA!$INSTALL_DATA$ac_delim ++CYGPATH_W!$CYGPATH_W$ac_delim ++PACKAGE!$PACKAGE$ac_delim ++VERSION!$VERSION$ac_delim ++ACLOCAL!$ACLOCAL$ac_delim ++AUTOCONF!$AUTOCONF$ac_delim ++AUTOMAKE!$AUTOMAKE$ac_delim ++AUTOHEADER!$AUTOHEADER$ac_delim ++MAKEINFO!$MAKEINFO$ac_delim ++install_sh!$install_sh$ac_delim ++STRIP!$STRIP$ac_delim ++INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim ++mkdir_p!$mkdir_p$ac_delim ++AWK!$AWK$ac_delim ++SET_MAKE!$SET_MAKE$ac_delim ++am__leading_dot!$am__leading_dot$ac_delim ++AMTAR!$AMTAR$ac_delim ++am__tar!$am__tar$ac_delim ++am__untar!$am__untar$ac_delim ++CC!$CC$ac_delim ++CFLAGS!$CFLAGS$ac_delim ++LDFLAGS!$LDFLAGS$ac_delim ++CPPFLAGS!$CPPFLAGS$ac_delim ++ac_ct_CC!$ac_ct_CC$ac_delim ++EXEEXT!$EXEEXT$ac_delim ++OBJEXT!$OBJEXT$ac_delim ++DEPDIR!$DEPDIR$ac_delim ++am__include!$am__include$ac_delim ++am__quote!$am__quote$ac_delim ++AMDEP_TRUE!$AMDEP_TRUE$ac_delim ++AMDEP_FALSE!$AMDEP_FALSE$ac_delim ++AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim ++CCDEPMODE!$CCDEPMODE$ac_delim ++am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim ++am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim ++LIBTOOL!$LIBTOOL$ac_delim ++build!$build$ac_delim ++build_cpu!$build_cpu$ac_delim ++build_vendor!$build_vendor$ac_delim ++build_os!$build_os$ac_delim ++host!$host$ac_delim ++host_cpu!$host_cpu$ac_delim ++host_vendor!$host_vendor$ac_delim ++host_os!$host_os$ac_delim ++SED!$SED$ac_delim ++GREP!$GREP$ac_delim ++EGREP!$EGREP$ac_delim ++FGREP!$FGREP$ac_delim ++LD!$LD$ac_delim ++DUMPBIN!$DUMPBIN$ac_delim ++ac_ct_DUMPBIN!$ac_ct_DUMPBIN$ac_delim ++NM!$NM$ac_delim ++LN_S!$LN_S$ac_delim ++AR!$AR$ac_delim ++RANLIB!$RANLIB$ac_delim ++lt_ECHO!$lt_ECHO$ac_delim ++DSYMUTIL!$DSYMUTIL$ac_delim ++NMEDIT!$NMEDIT$ac_delim ++_ACEOF ++ ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then ++ break ++ elif $ac_last_try; then ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi + done +-done +-IFS=$as_save_IFS +- +- test -z "$ac_cv_path_DOCBOOK2MAN" && ac_cv_path_DOCBOOK2MAN="no" +- ;; +-esac +-fi +-DOCBOOK2MAN=$ac_cv_path_DOCBOOK2MAN +-if test -n "$DOCBOOK2MAN"; then +- { echo "$as_me:$LINENO: result: $DOCBOOK2MAN" >&5 +-echo "${ECHO_T}$DOCBOOK2MAN" >&6; } +-else +- { echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6; } +-fi +- +- +-if test "$DOCBOOK2MAN" = "no" ; then +- { echo "$as_me:$LINENO: WARNING: docbook2man not found, will not be able to build man documentation" >&5 +-echo "$as_me: WARNING: docbook2man not found, will not be able to build man documentation" >&2;} +-fi +- if test "$DOCBOOK2MAN" != "no"; then +- HAVE_DOCBOOK2MAN_TRUE= +- HAVE_DOCBOOK2MAN_FALSE='#' +-else +- HAVE_DOCBOOK2MAN_TRUE='#' +- HAVE_DOCBOOK2MAN_FALSE= +-fi +- +- +- +-# Check whether --enable-more-warnings was given. +-if test "${enable_more_warnings+set}" = set; then +- enableval=$enable_more_warnings; set_more_warnings="$enableval" +-else +- +-if test -d $srcdir/CVS; then +- is_cvs_version=true +- set_more_warnings=yes +-else +- set_more_warnings=no +-fi + ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` ++if test -n "$ac_eof"; then ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ++ ac_eof=`expr $ac_eof + 1` + fi + +-{ echo "$as_me:$LINENO: checking for more warnings" >&5 +-echo $ECHO_N "checking for more warnings... $ECHO_C" >&6; } +-if test "$GCC" = "yes" -a "$set_more_warnings" != "no"; then +- { echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6; } +- CFLAGS="\ +- -Wall \ +- -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes \ +- -Wnested-externs -Wpointer-arith \ +- -Wcast-align -Wsign-compare \ +- $CFLAGS" +- +- for option in -Wno-strict-aliasing -Wno-sign-compare; do +- SAVE_CFLAGS="$CFLAGS" +- CFLAGS="$CFLAGS $option" +- { echo "$as_me:$LINENO: checking whether gcc understands $option" >&5 +-echo $ECHO_N "checking whether gcc understands $option... $ECHO_C" >&6; } +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ ++cat >>$CONFIG_STATUS <<_ACEOF ++cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b ++_ACEOF ++sed ' ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g ++s/^/s,@/; s/!/@,|#_!!_#|/ ++:n ++t n ++s/'"$ac_delim"'$/,g/; t ++s/$/\\/; p ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ++' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF ++CEOF$ac_eof + _ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-int +-main () +-{ + +- ; +- return 0; +-} ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ cat >conf$$subs.sed <<_ACEOF ++LIPO!$LIPO$ac_delim ++OTOOL!$OTOOL$ac_delim ++OTOOL64!$OTOOL64$ac_delim ++CPP!$CPP$ac_delim ++INTLTOOL_DESKTOP_RULE!$INTLTOOL_DESKTOP_RULE$ac_delim ++INTLTOOL_DIRECTORY_RULE!$INTLTOOL_DIRECTORY_RULE$ac_delim ++INTLTOOL_KEYS_RULE!$INTLTOOL_KEYS_RULE$ac_delim ++INTLTOOL_PROP_RULE!$INTLTOOL_PROP_RULE$ac_delim ++INTLTOOL_OAF_RULE!$INTLTOOL_OAF_RULE$ac_delim ++INTLTOOL_PONG_RULE!$INTLTOOL_PONG_RULE$ac_delim ++INTLTOOL_SERVER_RULE!$INTLTOOL_SERVER_RULE$ac_delim ++INTLTOOL_SHEET_RULE!$INTLTOOL_SHEET_RULE$ac_delim ++INTLTOOL_SOUNDLIST_RULE!$INTLTOOL_SOUNDLIST_RULE$ac_delim ++INTLTOOL_UI_RULE!$INTLTOOL_UI_RULE$ac_delim ++INTLTOOL_XAM_RULE!$INTLTOOL_XAM_RULE$ac_delim ++INTLTOOL_KBD_RULE!$INTLTOOL_KBD_RULE$ac_delim ++INTLTOOL_XML_RULE!$INTLTOOL_XML_RULE$ac_delim ++INTLTOOL_XML_NOMERGE_RULE!$INTLTOOL_XML_NOMERGE_RULE$ac_delim ++INTLTOOL_CAVES_RULE!$INTLTOOL_CAVES_RULE$ac_delim ++INTLTOOL_SCHEMAS_RULE!$INTLTOOL_SCHEMAS_RULE$ac_delim ++INTLTOOL_THEME_RULE!$INTLTOOL_THEME_RULE$ac_delim ++INTLTOOL_SERVICE_RULE!$INTLTOOL_SERVICE_RULE$ac_delim ++INTLTOOL_POLICY_RULE!$INTLTOOL_POLICY_RULE$ac_delim ++XGETTEXT!$XGETTEXT$ac_delim ++MSGMERGE!$MSGMERGE$ac_delim ++MSGFMT!$MSGFMT$ac_delim ++INTLTOOL_EXTRACT!$INTLTOOL_EXTRACT$ac_delim ++INTLTOOL_MERGE!$INTLTOOL_MERGE$ac_delim ++INTLTOOL_UPDATE!$INTLTOOL_UPDATE$ac_delim ++INTLTOOL_PERL!$INTLTOOL_PERL$ac_delim ++ALL_LINGUAS!$ALL_LINGUAS$ac_delim ++DATADIRNAME!$DATADIRNAME$ac_delim ++WARN_CFLAGS!$WARN_CFLAGS$ac_delim ++PKG_CONFIG!$PKG_CONFIG$ac_delim ++HELP_DIR!$HELP_DIR$ac_delim ++OMF_DIR!$OMF_DIR$ac_delim ++DOC_USER_FORMATS!$DOC_USER_FORMATS$ac_delim ++ENABLE_SK_TRUE!$ENABLE_SK_TRUE$ac_delim ++ENABLE_SK_FALSE!$ENABLE_SK_FALSE$ac_delim ++DISTCHECK_CONFIGURE_FLAGS!$DISTCHECK_CONFIGURE_FLAGS$ac_delim ++HAVE_GNOME_DOC_UTILS_TRUE!$HAVE_GNOME_DOC_UTILS_TRUE$ac_delim ++HAVE_GNOME_DOC_UTILS_FALSE!$HAVE_GNOME_DOC_UTILS_FALSE$ac_delim ++GLIB_GENMARSHAL!$GLIB_GENMARSHAL$ac_delim ++GETTEXT_PACKAGE!$GETTEXT_PACKAGE$ac_delim ++USE_NLS!$USE_NLS$ac_delim ++MSGFMT_OPTS!$MSGFMT_OPTS$ac_delim ++GMSGFMT!$GMSGFMT$ac_delim ++CATALOGS!$CATALOGS$ac_delim ++CATOBJEXT!$CATOBJEXT$ac_delim ++GMOFILES!$GMOFILES$ac_delim ++INSTOBJEXT!$INSTOBJEXT$ac_delim ++INTLLIBS!$INTLLIBS$ac_delim ++PO_IN_DATADIR_TRUE!$PO_IN_DATADIR_TRUE$ac_delim ++PO_IN_DATADIR_FALSE!$PO_IN_DATADIR_FALSE$ac_delim ++POFILES!$POFILES$ac_delim ++POSUB!$POSUB$ac_delim ++MKINSTALLDIRS!$MKINSTALLDIRS$ac_delim ++GLIB_REQUIRED!$GLIB_REQUIRED$ac_delim ++GTK_REQUIRED!$GTK_REQUIRED$ac_delim ++GDK_REQUIRED!$GDK_REQUIRED$ac_delim ++LIBGNOME_REQUIRED!$LIBGNOME_REQUIRED$ac_delim ++LIBGNOMEUI_REQUIRED!$LIBGNOMEUI_REQUIRED$ac_delim ++HAL_REQUIRED!$HAL_REQUIRED$ac_delim ++DBUS_REQUIRED!$DBUS_REQUIRED$ac_delim ++LIBGLADE_REQUIRED!$LIBGLADE_REQUIRED$ac_delim ++LIBNOTIFY_REQUIRED!$LIBNOTIFY_REQUIRED$ac_delim ++LIBWNCK_REQUIRED!$LIBWNCK_REQUIRED$ac_delim ++CAIRO_REQUIRED!$CAIRO_REQUIRED$ac_delim ++UNIQUE_REQUIRED!$UNIQUE_REQUIRED$ac_delim ++LIBPANEL_REQUIRED!$LIBPANEL_REQUIRED$ac_delim ++GSTREAMER_REQUIRED!$GSTREAMER_REQUIRED$ac_delim ++XRANDR_REQUIRED!$XRANDR_REQUIRED$ac_delim ++POLKIT_GNOME_REQUIRED!$POLKIT_GNOME_REQUIRED$ac_delim ++GLIB_CFLAGS!$GLIB_CFLAGS$ac_delim ++GLIB_LIBS!$GLIB_LIBS$ac_delim ++HAL_CFLAGS!$HAL_CFLAGS$ac_delim ++HAL_LIBS!$HAL_LIBS$ac_delim ++GSTREAMER_CFLAGS!$GSTREAMER_CFLAGS$ac_delim ++GSTREAMER_LIBS!$GSTREAMER_LIBS$ac_delim ++DBUS_CFLAGS!$DBUS_CFLAGS$ac_delim ++DBUS_LIBS!$DBUS_LIBS$ac_delim ++GNOME_CFLAGS!$GNOME_CFLAGS$ac_delim ++GNOME_LIBS!$GNOME_LIBS$ac_delim ++GDK_CFLAGS!$GDK_CFLAGS$ac_delim ++GDK_LIBS!$GDK_LIBS$ac_delim ++XRANDR_CFLAGS!$XRANDR_CFLAGS$ac_delim ++XRANDR_LIBS!$XRANDR_LIBS$ac_delim ++GCONFTOOL!$GCONFTOOL$ac_delim ++GCONF_SCHEMA_CONFIG_SOURCE!$GCONF_SCHEMA_CONFIG_SOURCE$ac_delim ++GCONF_SCHEMA_FILE_DIR!$GCONF_SCHEMA_FILE_DIR$ac_delim ++GCONF_SCHEMAS_INSTALL_TRUE!$GCONF_SCHEMAS_INSTALL_TRUE$ac_delim ++GCONF_SCHEMAS_INSTALL_FALSE!$GCONF_SCHEMAS_INSTALL_FALSE$ac_delim ++XMKMF!$XMKMF$ac_delim ++X_CFLAGS!$X_CFLAGS$ac_delim ++X_PRE_LIBS!$X_PRE_LIBS$ac_delim ++X_LIBS!$X_LIBS$ac_delim ++X_EXTRA_LIBS!$X_EXTRA_LIBS$ac_delim + _ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- has_option=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +- has_option=no +-fi ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then ++ break ++ elif $ac_last_try; then ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " ++ fi ++done + +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +- if test $has_option = no; then +- CFLAGS="$SAVE_CFLAGS" +- fi +- { echo "$as_me:$LINENO: result: $has_option" >&5 +-echo "${ECHO_T}$has_option" >&6; } +- unset has_option +- unset SAVE_CFLAGS +- done +- unset option +-else +- { echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6; } ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` ++if test -n "$ac_eof"; then ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ++ ac_eof=`expr $ac_eof + 1` + fi + +-ac_config_files="$ac_config_files Makefile src/Makefile src/dbus/Makefile applets/Makefile applets/brightness/Makefile applets/inhibit/Makefile libhal-glib/Makefile libdbus-glib/Makefile libidletime/Makefile libunique/Makefile docs/Makefile man/Makefile help/Makefile po/Makefile.in tools/Makefile test/Makefile data/Makefile data/gnome-power-manager.desktop.in data/gnome-power-preferences.desktop.in data/gnome-power-statistics.desktop.in data/sounds/Makefile data/icons/Makefile data/icons/16x16/Makefile data/icons/16x16/actions/Makefile data/icons/16x16/apps/Makefile data/icons/16x16/status/Makefile data/icons/22x22/Makefile data/icons/22x22/actions/Makefile data/icons/22x22/apps/Makefile data/icons/22x22/status/Makefile data/icons/24x24/Makefile data/icons/24x24/actions/Makefile data/icons/24x24/apps/Makefile data/icons/24x24/status/Makefile data/icons/48x48/Makefile data/icons/48x48/actions/Makefile data/icons/48x48/apps/Makefile data/icons/48x48/status/Makefile data/icons/scalable/Makefile data/icons/scalable/actions/Makefile data/icons/scalable/apps/Makefile data/icons/scalable/status/Makefile" +- ++cat >>$CONFIG_STATUS <<_ACEOF ++cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b ++_ACEOF ++sed ' ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g ++s/^/s,@/; s/!/@,|#_!!_#|/ ++:n ++t n ++s/'"$ac_delim"'$/,g/; t ++s/$/\\/; p ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ++' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF ++CEOF$ac_eof ++_ACEOF + +-cat >confcache <<\_ACEOF +-# This file is a shell script that caches the results of configure +-# tests run on this system so they can be shared between configure +-# scripts and configure runs, see configure's option --config-cache. +-# It is not useful on other systems. If it contains results you don't +-# want to keep, you may remove or edit it. +-# +-# config.status only pays attention to the cache file if you give it +-# the --recheck option to rerun configure. +-# +-# `ac_cv_env_foo' variables (set or unset) will be overridden when +-# loading this file, other *unset* `ac_cv_foo' will be assigned the +-# following values. + ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ cat >conf$$subs.sed <<_ACEOF ++SYSCONFDIR!$SYSCONFDIR$ac_delim ++DATADIR!$DATADIR$ac_delim ++BINDIR!$BINDIR$ac_delim ++SBINDIR!$SBINDIR$ac_delim ++DOCDIR!$DOCDIR$ac_delim ++POLKIT_CFLAGS!$POLKIT_CFLAGS$ac_delim ++POLKIT_LIBS!$POLKIT_LIBS$ac_delim ++HAVE_TESTS_TRUE!$HAVE_TESTS_TRUE$ac_delim ++HAVE_TESTS_FALSE!$HAVE_TESTS_FALSE$ac_delim ++POLKIT_GNOME_CFLAGS!$POLKIT_GNOME_CFLAGS$ac_delim ++POLKIT_GNOME_LIBS!$POLKIT_GNOME_LIBS$ac_delim ++HAVE_GCONF_DEFAULTS_TRUE!$HAVE_GCONF_DEFAULTS_TRUE$ac_delim ++HAVE_GCONF_DEFAULTS_FALSE!$HAVE_GCONF_DEFAULTS_FALSE$ac_delim ++HAVE_APPLETS_TRUE!$HAVE_APPLETS_TRUE$ac_delim ++HAVE_APPLETS_FALSE!$HAVE_APPLETS_FALSE$ac_delim ++XMLTO!$XMLTO$ac_delim ++DOCBOOK_DOCS_ENABLED_TRUE!$DOCBOOK_DOCS_ENABLED_TRUE$ac_delim ++DOCBOOK_DOCS_ENABLED_FALSE!$DOCBOOK_DOCS_ENABLED_FALSE$ac_delim ++DBUS_SERVICES_DIR!$DBUS_SERVICES_DIR$ac_delim ++LIBNOTIFY_CFLAGS!$LIBNOTIFY_CFLAGS$ac_delim ++LIBNOTIFY_LIBS!$LIBNOTIFY_LIBS$ac_delim ++HAVE_LIBNOTIFY_TRUE!$HAVE_LIBNOTIFY_TRUE$ac_delim ++HAVE_LIBNOTIFY_FALSE!$HAVE_LIBNOTIFY_FALSE$ac_delim ++UNIQUE_CFLAGS!$UNIQUE_CFLAGS$ac_delim ++UNIQUE_LIBS!$UNIQUE_LIBS$ac_delim ++HAVE_UNIQUE_TRUE!$HAVE_UNIQUE_TRUE$ac_delim ++HAVE_UNIQUE_FALSE!$HAVE_UNIQUE_FALSE$ac_delim ++GPM_EXTRA_LIBS!$GPM_EXTRA_LIBS$ac_delim ++DOCBOOK2MAN!$DOCBOOK2MAN$ac_delim ++HAVE_DOCBOOK2MAN_TRUE!$HAVE_DOCBOOK2MAN_TRUE$ac_delim ++HAVE_DOCBOOK2MAN_FALSE!$HAVE_DOCBOOK2MAN_FALSE$ac_delim ++LIBOBJS!$LIBOBJS$ac_delim ++LTLIBOBJS!$LTLIBOBJS$ac_delim + _ACEOF + +-# The following way of writing the cache mishandles newlines in values, +-# but we know of no workaround that is simple, portable, and efficient. +-# So, we kill variables containing newlines. +-# Ultrix sh set writes to stderr and can't be redirected directly, +-# and sets the high bit in the cache file unless we assign to the vars. +-( +- for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do +- eval ac_val=\$$ac_var +- case $ac_val in #( +- *${as_nl}*) +- case $ac_var in #( +- *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 +-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; +- esac +- case $ac_var in #( +- _ | IFS | as_nl) ;; #( +- *) $as_unset $ac_var ;; +- esac ;; +- esac +- done +- +- (set) 2>&1 | +- case $as_nl`(ac_space=' '; set) 2>&1` in #( +- *${as_nl}ac_space=\ *) +- # `set' does not quote correctly, so add quotes (double-quote +- # substitution turns \\\\ into \\, and sed turns \\ into \). +- sed -n \ +- "s/'/'\\\\''/g; +- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" +- ;; #( +- *) +- # `set' quotes correctly as required by POSIX, so do not add quotes. +- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" +- ;; +- esac | +- sort +-) | +- sed ' +- /^ac_cv_env_/b end +- t clear +- :clear +- s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ +- t end +- s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ +- :end' >>confcache +-if diff "$cache_file" confcache >/dev/null 2>&1; then :; else +- if test -w "$cache_file"; then +- test "x$cache_file" != "x/dev/null" && +- { echo "$as_me:$LINENO: updating cache $cache_file" >&5 +-echo "$as_me: updating cache $cache_file" >&6;} +- cat confcache >$cache_file ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 33; then ++ break ++ elif $ac_last_try; then ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } + else +- { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 +-echo "$as_me: not updating unwritable cache $cache_file" >&6;} ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi ++done ++ ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` ++if test -n "$ac_eof"; then ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ++ ac_eof=`expr $ac_eof + 1` + fi +-rm -f confcache + +-test "x$prefix" = xNONE && prefix=$ac_default_prefix +-# Let make expand exec_prefix. +-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' ++cat >>$CONFIG_STATUS <<_ACEOF ++cat >"\$tmp/subs-3.sed" <<\CEOF$ac_eof ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end ++_ACEOF ++sed ' ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g ++s/^/s,@/; s/!/@,|#_!!_#|/ ++:n ++t n ++s/'"$ac_delim"'$/,g/; t ++s/$/\\/; p ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ++' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF ++:end ++s/|#_!!_#|//g ++CEOF$ac_eof ++_ACEOF + +-DEFS=-DHAVE_CONFIG_H + +-ac_libobjs= +-ac_ltlibobjs= +-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue +- # 1. Remove the extension, and $U if already installed. +- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' +- ac_i=`echo "$ac_i" | sed "$ac_script"` +- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR +- # will be set to the directory where LIBOBJS objects are built. +- ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" +- ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' +-done +-LIBOBJS=$ac_libobjs ++# VPATH may cause trouble with some makes, so we remove $(srcdir), ++# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and ++# trailing colons and then remove the whole line if VPATH becomes empty ++# (actually we leave an empty line to preserve line numbers). ++if test "x$srcdir" = x.; then ++ ac_vpsub='/^[ ]*VPATH[ ]*=/{ ++s/:*\$(srcdir):*/:/ ++s/:*\${srcdir}:*/:/ ++s/:*@srcdir@:*/:/ ++s/^\([^=]*=[ ]*\):*/\1/ ++s/:*$// ++s/^[^=]*=[ ]*$// ++}' ++fi + +-LTLIBOBJS=$ac_ltlibobjs ++cat >>$CONFIG_STATUS <<\_ACEOF ++fi # test -n "$CONFIG_FILES" + + +-if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then +- { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-echo "$as_me: error: conditional \"AMDEP\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } +-fi +-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then +- { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } +-fi +-if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then +- { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } +-fi ++for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS ++do ++ case $ac_tag in ++ :[FHLC]) ac_mode=$ac_tag; continue;; ++ esac ++ case $ac_mode$ac_tag in ++ :[FHL]*:*);; ++ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 ++echo "$as_me: error: Invalid tag $ac_tag." >&2;} ++ { (exit 1); exit 1; }; };; ++ :[FH]-) ac_tag=-:-;; ++ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; ++ esac ++ ac_save_IFS=$IFS ++ IFS=: ++ set x $ac_tag ++ IFS=$ac_save_IFS ++ shift ++ ac_file=$1 ++ shift ++ ++ case $ac_mode in ++ :L) ac_source=$1;; ++ :[FH]) ++ ac_file_inputs= ++ for ac_f ++ do ++ case $ac_f in ++ -) ac_f="$tmp/stdin";; ++ *) # Look for the file first in the build tree, then in the source tree ++ # (if the path is not absolute). The absolute path cannot be DOS-style, ++ # because $ac_f cannot contain `:'. ++ test -f "$ac_f" || ++ case $ac_f in ++ [\\/$]*) false;; ++ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; ++ esac || ++ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 ++echo "$as_me: error: cannot find input file: $ac_f" >&2;} ++ { (exit 1); exit 1; }; };; ++ esac ++ ac_file_inputs="$ac_file_inputs $ac_f" ++ done ++ ++ # Let's still pretend it is `configure' which instantiates (i.e., don't ++ # use $as_me), people would be surprised to read: ++ # /* config.h. Generated by config.status. */ ++ configure_input="Generated from "`IFS=: ++ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." ++ if test x"$ac_file" != x-; then ++ configure_input="$ac_file. $configure_input" ++ { echo "$as_me:$LINENO: creating $ac_file" >&5 ++echo "$as_me: creating $ac_file" >&6;} ++ fi + +- ac_config_commands="$ac_config_commands po/stamp-it" ++ case $ac_tag in ++ *:-:* | *:-) cat >"$tmp/stdin";; ++ esac ++ ;; ++ esac + ++ ac_dir=`$as_dirname -- "$ac_file" || ++$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$ac_file" : 'X\(//\)[^/]' \| \ ++ X"$ac_file" : 'X\(//\)$' \| \ ++ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$ac_file" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ { as_dir="$ac_dir" ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { ++ as_dirs= ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || ++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$as_dir" : 'X\(//\)[^/]' \| \ ++ X"$as_dir" : 'X\(//\)$' \| \ ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$as_dir" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break ++ done ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 ++echo "$as_me: error: cannot create directory $as_dir" >&2;} ++ { (exit 1); exit 1; }; }; } ++ ac_builddir=. + +-if test -z "${ENABLE_SK_TRUE}" && test -z "${ENABLE_SK_FALSE}"; then +- { { echo "$as_me:$LINENO: error: conditional \"ENABLE_SK\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-echo "$as_me: error: conditional \"ENABLE_SK\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } +-fi +-if test -z "${HAVE_GNOME_DOC_UTILS_TRUE}" && test -z "${HAVE_GNOME_DOC_UTILS_FALSE}"; then +- { { echo "$as_me:$LINENO: error: conditional \"HAVE_GNOME_DOC_UTILS\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-echo "$as_me: error: conditional \"HAVE_GNOME_DOC_UTILS\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } +-fi +-if test -z "${GCONF_SCHEMAS_INSTALL_TRUE}" && test -z "${GCONF_SCHEMAS_INSTALL_FALSE}"; then +- { { echo "$as_me:$LINENO: error: conditional \"GCONF_SCHEMAS_INSTALL\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-echo "$as_me: error: conditional \"GCONF_SCHEMAS_INSTALL\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } +-fi +-if test -z "${HAVE_TESTS_TRUE}" && test -z "${HAVE_TESTS_FALSE}"; then +- { { echo "$as_me:$LINENO: error: conditional \"HAVE_TESTS\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-echo "$as_me: error: conditional \"HAVE_TESTS\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } +-fi +-if test -z "${HAVE_GCONF_DEFAULTS_TRUE}" && test -z "${HAVE_GCONF_DEFAULTS_FALSE}"; then +- { { echo "$as_me:$LINENO: error: conditional \"HAVE_GCONF_DEFAULTS\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-echo "$as_me: error: conditional \"HAVE_GCONF_DEFAULTS\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } +-fi +-if test -z "${HAVE_APPLETS_TRUE}" && test -z "${HAVE_APPLETS_FALSE}"; then +- { { echo "$as_me:$LINENO: error: conditional \"HAVE_APPLETS\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-echo "$as_me: error: conditional \"HAVE_APPLETS\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } +-fi +-if test -z "${DOCBOOK_DOCS_ENABLED_TRUE}" && test -z "${DOCBOOK_DOCS_ENABLED_FALSE}"; then +- { { echo "$as_me:$LINENO: error: conditional \"DOCBOOK_DOCS_ENABLED\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-echo "$as_me: error: conditional \"DOCBOOK_DOCS_ENABLED\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } +-fi +-if test -z "${HAVE_LIBNOTIFY_TRUE}" && test -z "${HAVE_LIBNOTIFY_FALSE}"; then +- { { echo "$as_me:$LINENO: error: conditional \"HAVE_LIBNOTIFY\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-echo "$as_me: error: conditional \"HAVE_LIBNOTIFY\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } +-fi +-if test -z "${HAVE_UNIQUE_TRUE}" && test -z "${HAVE_UNIQUE_FALSE}"; then +- { { echo "$as_me:$LINENO: error: conditional \"HAVE_UNIQUE\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-echo "$as_me: error: conditional \"HAVE_UNIQUE\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } +-fi +-if test -z "${HAVE_DOCBOOK2MAN_TRUE}" && test -z "${HAVE_DOCBOOK2MAN_FALSE}"; then +- { { echo "$as_me:$LINENO: error: conditional \"HAVE_DOCBOOK2MAN\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-echo "$as_me: error: conditional \"HAVE_DOCBOOK2MAN\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } +-fi ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) ++ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; ++esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix + +-: ${CONFIG_STATUS=./config.status} +-ac_clean_files_save=$ac_clean_files +-ac_clean_files="$ac_clean_files $CONFIG_STATUS" +-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +-echo "$as_me: creating $CONFIG_STATUS" >&6;} +-cat >$CONFIG_STATUS <<_ACEOF +-#! $SHELL +-# Generated by $as_me. +-# Run this file to recreate the current configuration. +-# Compiler output produced by configure, useful for debugging +-# configure, is in config.log if it exists. ++case $srcdir in ++ .) # We are building in place. ++ ac_srcdir=. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. ++ ac_srcdir=$srcdir$ac_dir_suffix; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; ++esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + +-debug=false +-ac_cs_recheck=false +-ac_cs_silent=false +-SHELL=\${CONFIG_SHELL-$SHELL} ++ ++ case $ac_mode in ++ :F) ++ # ++ # CONFIG_FILE ++ # ++ ++ case $INSTALL in ++ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; ++ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; ++ esac + _ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF +-## --------------------- ## +-## M4sh Initialization. ## +-## --------------------- ## ++# If the template does not know about datarootdir, expand it. ++# FIXME: This hack should be removed a few years after 2.60. ++ac_datarootdir_hack=; ac_datarootdir_seen= + +-# Be more Bourne compatible +-DUALCASE=1; export DUALCASE # for MKS sh +-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then +- emulate sh +- NULLCMD=: +- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which +- # is contrary to our usage. Disable this feature. +- alias -g '${1+"$@"}'='"$@"' +- setopt NO_GLOB_SUBST +-else +- case `(set -o) 2>/dev/null` in +- *posix*) set -o posix ;; ++case `sed -n '/datarootdir/ { ++ p ++ q ++} ++/@datadir@/p ++/@docdir@/p ++/@infodir@/p ++/@localedir@/p ++/@mandir@/p ++' $ac_file_inputs` in ++*datarootdir*) ac_datarootdir_seen=yes;; ++*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) ++ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 ++echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF ++ ac_datarootdir_hack=' ++ s&@datadir@&$datadir&g ++ s&@docdir@&$docdir&g ++ s&@infodir@&$infodir&g ++ s&@localedir@&$localedir&g ++ s&@mandir@&$mandir&g ++ s&\\\${datarootdir}&$datarootdir&g' ;; + esac ++_ACEOF + +-fi +- ++# Neutralize VPATH when `$srcdir' = `.'. ++# Shell code in configure.ac might set extrasub. ++# FIXME: do we really want to maintain this feature? ++cat >>$CONFIG_STATUS <<_ACEOF ++ sed "$ac_vpsub ++$extrasub ++_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF ++:t ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b ++s&@configure_input@&$configure_input&;t t ++s&@top_builddir@&$ac_top_builddir_sub&;t t ++s&@srcdir@&$ac_srcdir&;t t ++s&@abs_srcdir@&$ac_abs_srcdir&;t t ++s&@top_srcdir@&$ac_top_srcdir&;t t ++s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t ++s&@builddir@&$ac_builddir&;t t ++s&@abs_builddir@&$ac_abs_builddir&;t t ++s&@abs_top_builddir@&$ac_abs_top_builddir&;t t ++s&@INSTALL@&$ac_INSTALL&;t t ++$ac_datarootdir_hack ++" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" | sed -f "$tmp/subs-3.sed" >$tmp/out + ++test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && ++ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && ++ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && ++ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined." >&5 ++echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined." >&2;} + ++ rm -f "$tmp/stdin" ++ case $ac_file in ++ -) cat "$tmp/out"; rm -f "$tmp/out";; ++ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; ++ esac ++ ;; ++ :H) ++ # ++ # CONFIG_HEADER ++ # ++_ACEOF + +-# PATH needs CR +-# Avoid depending upon Character Ranges. +-as_cr_letters='abcdefghijklmnopqrstuvwxyz' +-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +-as_cr_Letters=$as_cr_letters$as_cr_LETTERS +-as_cr_digits='0123456789' +-as_cr_alnum=$as_cr_Letters$as_cr_digits ++# Transform confdefs.h into a sed script `conftest.defines', that ++# substitutes the proper values into config.h.in to produce config.h. ++rm -f conftest.defines conftest.tail ++# First, append a space to every undef/define line, to ease matching. ++echo 's/$/ /' >conftest.defines ++# Then, protect against being on the right side of a sed subst, or in ++# an unquoted here document, in config.status. If some macros were ++# called several times there might be several #defines for the same ++# symbol, which is useless. But do not sort them, since the last ++# AC_DEFINE must be honored. ++ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* ++# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where ++# NAME is the cpp macro being defined, VALUE is the value it is being given. ++# PARAMS is the parameter list in the macro definition--in most cases, it's ++# just an empty string. ++ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*' ++ac_dB='\\)[ (].*,\\1define\\2' ++ac_dC=' ' ++ac_dD=' ,' + +-# The user is always right. +-if test "${PATH_SEPARATOR+set}" != set; then +- echo "#! /bin/sh" >conf$$.sh +- echo "exit 0" >>conf$$.sh +- chmod +x conf$$.sh +- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then +- PATH_SEPARATOR=';' +- else +- PATH_SEPARATOR=: +- fi +- rm -f conf$$.sh +-fi ++uniq confdefs.h | ++ sed -n ' ++ t rset ++ :rset ++ s/^[ ]*#[ ]*define[ ][ ]*// ++ t ok ++ d ++ :ok ++ s/[\\&,]/\\&/g ++ s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p ++ s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p ++ ' >>conftest.defines + +-# Support unset when possible. +-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then +- as_unset=unset +-else +- as_unset=false +-fi ++# Remove the space that was appended to ease matching. ++# Then replace #undef with comments. This is necessary, for ++# example, in the case of _POSIX_SOURCE, which is predefined and required ++# on some systems where configure will not decide to define it. ++# (The regexp can be short, since the line contains either #define or #undef.) ++echo 's/ $// ++s,^[ #]*u.*,/* & */,' >>conftest.defines + ++# Break up conftest.defines: ++ac_max_sed_lines=50 + +-# IFS +-# We need space, tab and new line, in precisely that order. Quoting is +-# there to prevent editors from complaining about space-tab. +-# (If _AS_PATH_WALK were called with IFS unset, it would disable word +-# splitting by setting IFS to empty value.) +-as_nl=' +-' +-IFS=" "" $as_nl" ++# First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1" ++# Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2" ++# Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1" ++# et cetera. ++ac_in='$ac_file_inputs' ++ac_out='"$tmp/out1"' ++ac_nxt='"$tmp/out2"' + +-# Find who we are. Look in the path if we contain no directory separator. +-case $0 in +- *[\\/]* ) as_myself=$0 ;; +- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH ++while : + do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +-done +-IFS=$as_save_IFS +- +- ;; +-esac +-# We did not find ourselves, most probably we were run as `sh COMMAND' +-# in which case we are not to be found in the path. +-if test "x$as_myself" = x; then +- as_myself=$0 +-fi +-if test ! -f "$as_myself"; then +- echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 +- { (exit 1); exit 1; } +-fi +- +-# Work around bugs in pre-3.0 UWIN ksh. +-for as_var in ENV MAIL MAILPATH +-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++ # Write a here document: ++ cat >>$CONFIG_STATUS <<_ACEOF ++ # First, check the format of the line: ++ cat >"\$tmp/defines.sed" <<\\CEOF ++/^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def ++/^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def ++b ++:def ++_ACEOF ++ sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS ++ echo 'CEOF ++ sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS ++ ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in ++ sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail ++ grep . conftest.tail >/dev/null || break ++ rm -f conftest.defines ++ mv conftest.tail conftest.defines + done +-PS1='$ ' +-PS2='> ' +-PS4='+ ' ++rm -f conftest.defines conftest.tail + +-# NLS nuisances. +-for as_var in \ +- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ +- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ +- LC_TELEPHONE LC_TIME +-do +- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then +- eval $as_var=C; export $as_var ++echo "ac_result=$ac_in" >>$CONFIG_STATUS ++cat >>$CONFIG_STATUS <<\_ACEOF ++ if test x"$ac_file" != x-; then ++ echo "/* $configure_input */" >"$tmp/config.h" ++ cat "$ac_result" >>"$tmp/config.h" ++ if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then ++ { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 ++echo "$as_me: $ac_file is unchanged" >&6;} ++ else ++ rm -f $ac_file ++ mv "$tmp/config.h" $ac_file ++ fi + else +- ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++ echo "/* $configure_input */" ++ cat "$ac_result" + fi ++ rm -f "$tmp/out12" ++# Compute $ac_file's index in $config_headers. ++_am_stamp_count=1 ++for _am_header in $config_headers :; do ++ case $_am_header in ++ $ac_file | $ac_file:* ) ++ break ;; ++ * ) ++ _am_stamp_count=`expr $_am_stamp_count + 1` ;; ++ esac + done ++echo "timestamp for $ac_file" >`$as_dirname -- $ac_file || ++$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X$ac_file : 'X\(//\)[^/]' \| \ ++ X$ac_file : 'X\(//\)$' \| \ ++ X$ac_file : 'X\(/\)' \| . 2>/dev/null || ++echo X$ac_file | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'`/stamp-h$_am_stamp_count ++ ;; + +-# Required to use basename. +-if expr a : '\(a\)' >/dev/null 2>&1 && +- test "X`expr 00001 : '.*\(...\)'`" = X001; then +- as_expr=expr +-else +- as_expr=false +-fi +- +-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then +- as_basename=basename +-else +- as_basename=false +-fi ++ :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5 ++echo "$as_me: executing $ac_file commands" >&6;} ++ ;; ++ esac + + +-# Name of the executable. +-as_me=`$as_basename -- "$0" || +-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ +- X"$0" : 'X\(//\)$' \| \ +- X"$0" : 'X\(/\)' \| . 2>/dev/null || +-echo X/"$0" | +- sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ case $ac_file$ac_mode in ++ "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do ++ # Strip MF so we end up with the name of the file. ++ mf=`echo "$mf" | sed -e 's/:.*$//'` ++ # Check whether this is an Automake generated Makefile or not. ++ # We used to match only the files named `Makefile.in', but ++ # some people rename them; so instead we look at the file content. ++ # Grep'ing the first line is not enough: some people post-process ++ # each Makefile.in and add a new line on top of each file to say so. ++ # So let's grep whole file. ++ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then ++ dirpart=`$as_dirname -- "$mf" || ++$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$mf" : 'X\(//\)[^/]' \| \ ++ X"$mf" : 'X\(//\)$' \| \ ++ X"$mf" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$mf" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ + s//\1/ + q + } +- /^X\/\(\/\/\)$/{ ++ /^X\(\/\).*/{ + s//\1/ + q + } +- /^X\/\(\/\).*/{ ++ s/.*/./; q'` ++ else ++ continue ++ fi ++ # Extract the definition of DEPDIR, am__include, and am__quote ++ # from the Makefile without running `make'. ++ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` ++ test -z "$DEPDIR" && continue ++ am__include=`sed -n 's/^am__include = //p' < "$mf"` ++ test -z "am__include" && continue ++ am__quote=`sed -n 's/^am__quote = //p' < "$mf"` ++ # When using ansi2knr, U may be empty or an underscore; expand it ++ U=`sed -n 's/^U = //p' < "$mf"` ++ # Find all dependency output files, they are included files with ++ # $(DEPDIR) in their names. We invoke sed twice because it is the ++ # simplest approach to changing $(DEPDIR) to its actual value in the ++ # expansion. ++ for file in `sed -n " ++ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ ++ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do ++ # Make sure the directory exists. ++ test -f "$dirpart/$file" && continue ++ fdir=`$as_dirname -- "$file" || ++$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$file" : 'X\(//\)[^/]' \| \ ++ X"$file" : 'X\(//\)$' \| \ ++ X"$file" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$file" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` ++ { as_dir=$dirpart/$fdir ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { ++ as_dirs= ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || ++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$as_dir" : 'X\(//\)[^/]' \| \ ++ X"$as_dir" : 'X\(//\)$' \| \ ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$as_dir" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break ++ done ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 ++echo "$as_me: error: cannot create directory $as_dir" >&2;} ++ { (exit 1); exit 1; }; }; } ++ # echo "creating $dirpart/$file" ++ echo '# dummy' > "$dirpart/$file" ++ done ++done ++ ;; ++ "libtool":C) + +-# CDPATH. +-$as_unset CDPATH +- +- +- +- as_lineno_1=$LINENO +- as_lineno_2=$LINENO +- test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { +- +- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO +- # uniformly replaced by the line number. The first 'sed' inserts a +- # line-number line after each line using $LINENO; the second 'sed' +- # does the real work. The second script uses 'N' to pair each +- # line-number line with the line containing $LINENO, and appends +- # trailing '-' during substitution so that $LINENO is not a special +- # case at line end. +- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the +- # scripts with optimization help from Paolo Bonzini. Blame Lee +- # E. McMahon (1931-1989) for sed's syntax. :-) +- sed -n ' +- p +- /[$]LINENO/= +- ' <$as_myself | +- sed ' +- s/[$]LINENO.*/&-/ +- t lineno +- b +- :lineno +- N +- :loop +- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ +- t loop +- s/-\n.*// +- ' >$as_me.lineno && +- chmod +x "$as_me.lineno" || +- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 +- { (exit 1); exit 1; }; } +- +- # Don't try to exec as it changes $[0], causing all sort of problems +- # (the dirname of $[0] is not the place where we might find the +- # original and so on. Autoconf is especially sensitive to this). +- . "./$as_me.lineno" +- # Exit status is that of the last command. +- exit +-} ++ # See if we are running on zsh, and set the options which allow our ++ # commands through without removal of \ escapes. ++ if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++ fi + ++ cfgfile="${ofile}T" ++ trap "$RM \"$cfgfile\"; exit 1" 1 2 15 ++ $RM "$cfgfile" + +-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then +- as_dirname=dirname +-else +- as_dirname=false +-fi ++ cat <<_LT_EOF >> "$cfgfile" ++#! $SHELL + +-ECHO_C= ECHO_N= ECHO_T= +-case `echo -n x` in +--n*) +- case `echo 'x\c'` in +- *c*) ECHO_T=' ';; # ECHO_T is single tab character. +- *) ECHO_C='\c';; +- esac;; +-*) +- ECHO_N='-n';; +-esac ++# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. ++# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION ++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: ++# NOTE: Changes made to this file will be lost: look at ltmain.sh. ++# ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, ++# 2006, 2007, 2008 Free Software Foundation, Inc. ++# Written by Gordon Matzigkeit, 1996 ++# ++# This file is part of GNU Libtool. ++# ++# GNU Libtool is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# As a special exception to the GNU General Public License, ++# if you distribute this file as part of a program or library that ++# is built using GNU Libtool, you may include this file under the ++# same distribution terms that you use for the rest of that program. ++# ++# GNU Libtool is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with GNU Libtool; see the file COPYING. If not, a copy ++# can be downloaded from http://www.gnu.org/licenses/gpl.html, or ++# obtained by writing to the Free Software Foundation, Inc., ++# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + +-if expr a : '\(a\)' >/dev/null 2>&1 && +- test "X`expr 00001 : '.*\(...\)'`" = X001; then +- as_expr=expr +-else +- as_expr=false +-fi + +-rm -f conf$$ conf$$.exe conf$$.file +-if test -d conf$$.dir; then +- rm -f conf$$.dir/conf$$.file +-else +- rm -f conf$$.dir +- mkdir conf$$.dir +-fi +-echo >conf$$.file +-if ln -s conf$$.file conf$$ 2>/dev/null; then +- as_ln_s='ln -s' +- # ... but there are two gotchas: +- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. +- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. +- # In both cases, we have to default to `cp -p'. +- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || +- as_ln_s='cp -p' +-elif ln conf$$.file conf$$ 2>/dev/null; then +- as_ln_s=ln +-else +- as_ln_s='cp -p' +-fi +-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +-rmdir conf$$.dir 2>/dev/null ++# The names of the tagged configurations supported by this script. ++available_tags="" + +-if mkdir -p . 2>/dev/null; then +- as_mkdir_p=: +-else +- test -d ./-p && rmdir ./-p +- as_mkdir_p=false +-fi ++# ### BEGIN LIBTOOL CONFIG + +-if test -x / >/dev/null 2>&1; then +- as_test_x='test -x' +-else +- if ls -dL / >/dev/null 2>&1; then +- as_ls_L_option=L +- else +- as_ls_L_option= +- fi +- as_test_x=' +- eval sh -c '\'' +- if test -d "$1"; then +- test -d "$1/."; +- else +- case $1 in +- -*)set "./$1";; +- esac; +- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in +- ???[sx]*):;;*)false;;esac;fi +- '\'' sh +- ' +-fi +-as_executable_p=$as_test_x ++# Which release of libtool.m4 was used? ++macro_version=$macro_version ++macro_revision=$macro_revision + +-# Sed expression to map a string onto a valid CPP name. +-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" ++# Whether or not to build shared libraries. ++build_libtool_libs=$enable_shared + +-# Sed expression to map a string onto a valid variable name. +-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" ++# Whether or not to build static libraries. ++build_old_libs=$enable_static + ++# What type of objects to build. ++pic_mode=$pic_mode + +-exec 6>&1 ++# Whether or not to optimize for fast installation. ++fast_install=$enable_fast_install + +-# Save the log message, to keep $[0] and so on meaningful, and to +-# report actual input values of CONFIG_FILES etc. instead of their +-# values after options handling. +-ac_log=" +-This file was extended by gnome-power-manager $as_me 2.24.0, which was +-generated by GNU Autoconf 2.61. Invocation command line was ++# The host system. ++host_alias=$host_alias ++host=$host ++host_os=$host_os + +- CONFIG_FILES = $CONFIG_FILES +- CONFIG_HEADERS = $CONFIG_HEADERS +- CONFIG_LINKS = $CONFIG_LINKS +- CONFIG_COMMANDS = $CONFIG_COMMANDS +- $ $0 $@ ++# The build system. ++build_alias=$build_alias ++build=$build ++build_os=$build_os + +-on `(hostname || uname -n) 2>/dev/null | sed 1q` +-" ++# A sed program that does not truncate output. ++SED=$lt_SED + +-_ACEOF ++# Sed that helps us avoid accidentally triggering echo(1) options like -n. ++Xsed="\$SED -e 1s/^X//" + +-cat >>$CONFIG_STATUS <<_ACEOF +-# Files that config.status was made for. +-config_files="$ac_config_files" +-config_headers="$ac_config_headers" +-config_commands="$ac_config_commands" ++# A grep program that handles long lines. ++GREP=$lt_GREP + +-_ACEOF ++# An ERE matcher. ++EGREP=$lt_EGREP + +-cat >>$CONFIG_STATUS <<\_ACEOF +-ac_cs_usage="\ +-\`$as_me' instantiates files from templates according to the +-current configuration. ++# A literal string matcher. ++FGREP=$lt_FGREP + +-Usage: $0 [OPTIONS] [FILE]... ++# A BSD- or MS-compatible name lister. ++NM=$lt_NM + +- -h, --help print this help, then exit +- -V, --version print version number and configuration settings, then exit +- -q, --quiet do not print progress messages +- -d, --debug don't remove temporary files +- --recheck update $as_me by reconfiguring in the same conditions +- --file=FILE[:TEMPLATE] +- instantiate the configuration file FILE +- --header=FILE[:TEMPLATE] +- instantiate the configuration header FILE ++# Whether we need soft or hard links. ++LN_S=$lt_LN_S + +-Configuration files: +-$config_files ++# What is the maximum length of a command? ++max_cmd_len=$max_cmd_len + +-Configuration headers: +-$config_headers ++# Object file suffix (normally "o"). ++objext=$ac_objext + +-Configuration commands: +-$config_commands ++# Executable file suffix (normally ""). ++exeext=$exeext + +-Report bugs to ." ++# whether the shell understands "unset". ++lt_unset=$lt_unset + +-_ACEOF +-cat >>$CONFIG_STATUS <<_ACEOF +-ac_cs_version="\\ +-gnome-power-manager config.status 2.24.0 +-configured by $0, generated by GNU Autoconf 2.61, +- with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" ++# turn spaces into newlines. ++SP2NL=$lt_lt_SP2NL + +-Copyright (C) 2006 Free Software Foundation, Inc. +-This config.status script is free software; the Free Software Foundation +-gives unlimited permission to copy, distribute and modify it." ++# turn newlines into spaces. ++NL2SP=$lt_lt_NL2SP + +-ac_pwd='$ac_pwd' +-srcdir='$srcdir' +-INSTALL='$INSTALL' +-MKDIR_P='$MKDIR_P' +-_ACEOF ++# How to create reloadable object files. ++reload_flag=$lt_reload_flag ++reload_cmds=$lt_reload_cmds + +-cat >>$CONFIG_STATUS <<\_ACEOF +-# If no file are specified by the user, then we need to provide default +-# value. By we need to know if files were specified by the user. +-ac_need_defaults=: +-while test $# != 0 +-do +- case $1 in +- --*=*) +- ac_option=`expr "X$1" : 'X\([^=]*\)='` +- ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` +- ac_shift=: +- ;; +- *) +- ac_option=$1 +- ac_optarg=$2 +- ac_shift=shift +- ;; +- esac ++# Method to check whether dependent libraries are shared objects. ++deplibs_check_method=$lt_deplibs_check_method + +- case $ac_option in +- # Handling of the options. +- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) +- ac_cs_recheck=: ;; +- --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) +- echo "$ac_cs_version"; exit ;; +- --debug | --debu | --deb | --de | --d | -d ) +- debug=: ;; +- --file | --fil | --fi | --f ) +- $ac_shift +- CONFIG_FILES="$CONFIG_FILES $ac_optarg" +- ac_need_defaults=false;; +- --header | --heade | --head | --hea ) +- $ac_shift +- CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" +- ac_need_defaults=false;; +- --he | --h) +- # Conflict between --help and --header +- { echo "$as_me: error: ambiguous option: $1 +-Try \`$0 --help' for more information." >&2 +- { (exit 1); exit 1; }; };; +- --help | --hel | -h ) +- echo "$ac_cs_usage"; exit ;; +- -q | -quiet | --quiet | --quie | --qui | --qu | --q \ +- | -silent | --silent | --silen | --sile | --sil | --si | --s) +- ac_cs_silent=: ;; ++# Command to use when deplibs_check_method == "file_magic". ++file_magic_cmd=$lt_file_magic_cmd + +- # This is an error. +- -*) { echo "$as_me: error: unrecognized option: $1 +-Try \`$0 --help' for more information." >&2 +- { (exit 1); exit 1; }; } ;; ++# The archiver. ++AR=$lt_AR ++AR_FLAGS=$lt_AR_FLAGS + +- *) ac_config_targets="$ac_config_targets $1" +- ac_need_defaults=false ;; ++# A symbol stripping program. ++STRIP=$lt_STRIP + +- esac +- shift +-done ++# Commands used to install an old-style archive. ++RANLIB=$lt_RANLIB ++old_postinstall_cmds=$lt_old_postinstall_cmds ++old_postuninstall_cmds=$lt_old_postuninstall_cmds + +-ac_configure_extra_args= ++# A C compiler. ++LTCC=$lt_CC + +-if $ac_cs_silent; then +- exec 6>/dev/null +- ac_configure_extra_args="$ac_configure_extra_args --silent" +-fi ++# LTCC compiler flags. ++LTCFLAGS=$lt_CFLAGS + +-_ACEOF +-cat >>$CONFIG_STATUS <<_ACEOF +-if \$ac_cs_recheck; then +- echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 +- CONFIG_SHELL=$SHELL +- export CONFIG_SHELL +- exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion +-fi ++# Take the output of nm and produce a listing of raw symbols and C names. ++global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF +-exec 5>>config.log +-{ +- echo +- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +-## Running $as_me. ## +-_ASBOX +- echo "$ac_log" +-} >&5 ++# Transform the output of nm in a proper C declaration. ++global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +-_ACEOF +-cat >>$CONFIG_STATUS <<_ACEOF +-# +-# INIT-COMMANDS +-# +-AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" +-INTLTOOL_PERL='${INTLTOOL_PERL}' ac_aux_dir='${ac_aux_dir}' +-prefix="$prefix" exec_prefix="$exec_prefix" INTLTOOL_LIBDIR="$libdir" +-INTLTOOL_EXTRACT='${INTLTOOL_EXTRACT}' ++# Transform the output of nm in a C name address pair. ++global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + ++# Transform the output of nm in a C name address pair when lib prefix is needed. ++global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix + +-_ACEOF ++# The name of the directory that contains temporary libtool files. ++objdir=$objdir + +-cat >>$CONFIG_STATUS <<\_ACEOF ++# Shell to use when invoking shell scripts. ++SHELL=$lt_SHELL + +-# Handling of arguments. +-for ac_config_target in $ac_config_targets +-do +- case $ac_config_target in +- "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; +- "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; +- "intltool") CONFIG_COMMANDS="$CONFIG_COMMANDS intltool" ;; +- "default-1") CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;; +- "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; +- "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; +- "src/dbus/Makefile") CONFIG_FILES="$CONFIG_FILES src/dbus/Makefile" ;; +- "applets/Makefile") CONFIG_FILES="$CONFIG_FILES applets/Makefile" ;; +- "applets/brightness/Makefile") CONFIG_FILES="$CONFIG_FILES applets/brightness/Makefile" ;; +- "applets/inhibit/Makefile") CONFIG_FILES="$CONFIG_FILES applets/inhibit/Makefile" ;; +- "libhal-glib/Makefile") CONFIG_FILES="$CONFIG_FILES libhal-glib/Makefile" ;; +- "libdbus-glib/Makefile") CONFIG_FILES="$CONFIG_FILES libdbus-glib/Makefile" ;; +- "libidletime/Makefile") CONFIG_FILES="$CONFIG_FILES libidletime/Makefile" ;; +- "libunique/Makefile") CONFIG_FILES="$CONFIG_FILES libunique/Makefile" ;; +- "docs/Makefile") CONFIG_FILES="$CONFIG_FILES docs/Makefile" ;; +- "man/Makefile") CONFIG_FILES="$CONFIG_FILES man/Makefile" ;; +- "help/Makefile") CONFIG_FILES="$CONFIG_FILES help/Makefile" ;; +- "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; +- "tools/Makefile") CONFIG_FILES="$CONFIG_FILES tools/Makefile" ;; +- "test/Makefile") CONFIG_FILES="$CONFIG_FILES test/Makefile" ;; +- "data/Makefile") CONFIG_FILES="$CONFIG_FILES data/Makefile" ;; +- "data/gnome-power-manager.desktop.in") CONFIG_FILES="$CONFIG_FILES data/gnome-power-manager.desktop.in" ;; +- "data/gnome-power-preferences.desktop.in") CONFIG_FILES="$CONFIG_FILES data/gnome-power-preferences.desktop.in" ;; +- "data/gnome-power-statistics.desktop.in") CONFIG_FILES="$CONFIG_FILES data/gnome-power-statistics.desktop.in" ;; +- "data/sounds/Makefile") CONFIG_FILES="$CONFIG_FILES data/sounds/Makefile" ;; +- "data/icons/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/Makefile" ;; +- "data/icons/16x16/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/16x16/Makefile" ;; +- "data/icons/16x16/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/16x16/actions/Makefile" ;; +- "data/icons/16x16/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/16x16/apps/Makefile" ;; +- "data/icons/16x16/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/16x16/status/Makefile" ;; +- "data/icons/22x22/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/22x22/Makefile" ;; +- "data/icons/22x22/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/22x22/actions/Makefile" ;; +- "data/icons/22x22/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/22x22/apps/Makefile" ;; +- "data/icons/22x22/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/22x22/status/Makefile" ;; +- "data/icons/24x24/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/24x24/Makefile" ;; +- "data/icons/24x24/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/24x24/actions/Makefile" ;; +- "data/icons/24x24/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/24x24/apps/Makefile" ;; +- "data/icons/24x24/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/24x24/status/Makefile" ;; +- "data/icons/48x48/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/48x48/Makefile" ;; +- "data/icons/48x48/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/48x48/actions/Makefile" ;; +- "data/icons/48x48/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/48x48/apps/Makefile" ;; +- "data/icons/48x48/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/48x48/status/Makefile" ;; +- "data/icons/scalable/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/scalable/Makefile" ;; +- "data/icons/scalable/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/scalable/actions/Makefile" ;; +- "data/icons/scalable/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/scalable/apps/Makefile" ;; +- "data/icons/scalable/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/scalable/status/Makefile" ;; +- "po/stamp-it") CONFIG_COMMANDS="$CONFIG_COMMANDS po/stamp-it" ;; ++# An echo program that does not interpret backslashes. ++ECHO=$lt_ECHO + +- *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +-echo "$as_me: error: invalid argument: $ac_config_target" >&2;} +- { (exit 1); exit 1; }; };; +- esac +-done ++# Used to examine libraries when file_magic_cmd begins with "file". ++MAGIC_CMD=$MAGIC_CMD + ++# Must we lock files when doing compilation? ++need_locks=$lt_need_locks + +-# If the user did not use the arguments to specify the items to instantiate, +-# then the envvar interface is used. Set only those that are not. +-# We use the long form for the default assignment because of an extremely +-# bizarre bug on SunOS 4.1.3. +-if $ac_need_defaults; then +- test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files +- test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers +- test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +-fi ++# Tool to manipulate archived DWARF debug symbol files on Mac OS X. ++DSYMUTIL=$lt_DSYMUTIL + +-# Have a temporary directory for convenience. Make it in the build tree +-# simply because there is no reason against having it here, and in addition, +-# creating and moving files from /tmp can sometimes cause problems. +-# Hook for its removal unless debugging. +-# Note that there is a small window in which the directory will not be cleaned: +-# after its creation but before its name has been assigned to `$tmp'. +-$debug || +-{ +- tmp= +- trap 'exit_status=$? +- { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status +-' 0 +- trap '{ (exit 1); exit 1; }' 1 2 13 15 +-} +-# Create a (secure) tmp directory for tmp files. ++# Tool to change global to local symbols on Mac OS X. ++NMEDIT=$lt_NMEDIT + +-{ +- tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && +- test -n "$tmp" && test -d "$tmp" +-} || +-{ +- tmp=./conf$$-$RANDOM +- (umask 077 && mkdir "$tmp") +-} || +-{ +- echo "$me: cannot create a temporary directory in ." >&2 +- { (exit 1); exit 1; } +-} ++# Tool to manipulate fat objects and archives on Mac OS X. ++LIPO=$lt_LIPO ++ ++# ldd/readelf like tool for Mach-O binaries on Mac OS X. ++OTOOL=$lt_OTOOL + +-# +-# Set up the sed scripts for CONFIG_FILES section. +-# ++# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. ++OTOOL64=$lt_OTOOL64 + +-# No need to generate the scripts if there are no CONFIG_FILES. +-# This happens for instance when ./config.status config.h +-if test -n "$CONFIG_FILES"; then ++# Old archive suffix (normally "a"). ++libext=$libext + +-_ACEOF ++# Shared library suffix (normally ".so"). ++shrext_cmds=$lt_shrext_cmds + ++# The commands to extract the exported symbol list from a shared archive. ++extract_expsyms_cmds=$lt_extract_expsyms_cmds + ++# Variables whose values should be saved in libtool wrapper scripts and ++# restored at link time. ++variables_saved_for_relink=$lt_variables_saved_for_relink + +-ac_delim='%!_!# ' +-for ac_last_try in false false false false false :; do +- cat >conf$$subs.sed <<_ACEOF +-SHELL!$SHELL$ac_delim +-PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim +-PACKAGE_NAME!$PACKAGE_NAME$ac_delim +-PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim +-PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim +-PACKAGE_STRING!$PACKAGE_STRING$ac_delim +-PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim +-exec_prefix!$exec_prefix$ac_delim +-prefix!$prefix$ac_delim +-program_transform_name!$program_transform_name$ac_delim +-bindir!$bindir$ac_delim +-sbindir!$sbindir$ac_delim +-libexecdir!$libexecdir$ac_delim +-datarootdir!$datarootdir$ac_delim +-datadir!$datadir$ac_delim +-sysconfdir!$sysconfdir$ac_delim +-sharedstatedir!$sharedstatedir$ac_delim +-localstatedir!$localstatedir$ac_delim +-includedir!$includedir$ac_delim +-oldincludedir!$oldincludedir$ac_delim +-docdir!$docdir$ac_delim +-infodir!$infodir$ac_delim +-htmldir!$htmldir$ac_delim +-dvidir!$dvidir$ac_delim +-pdfdir!$pdfdir$ac_delim +-psdir!$psdir$ac_delim +-libdir!$libdir$ac_delim +-localedir!$localedir$ac_delim +-mandir!$mandir$ac_delim +-DEFS!$DEFS$ac_delim +-ECHO_C!$ECHO_C$ac_delim +-ECHO_N!$ECHO_N$ac_delim +-ECHO_T!$ECHO_T$ac_delim +-LIBS!$LIBS$ac_delim +-build_alias!$build_alias$ac_delim +-host_alias!$host_alias$ac_delim +-target_alias!$target_alias$ac_delim +-INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim +-INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim +-INSTALL_DATA!$INSTALL_DATA$ac_delim +-am__isrc!$am__isrc$ac_delim +-CYGPATH_W!$CYGPATH_W$ac_delim +-PACKAGE!$PACKAGE$ac_delim +-VERSION!$VERSION$ac_delim +-ACLOCAL!$ACLOCAL$ac_delim +-AUTOCONF!$AUTOCONF$ac_delim +-AUTOMAKE!$AUTOMAKE$ac_delim +-AUTOHEADER!$AUTOHEADER$ac_delim +-MAKEINFO!$MAKEINFO$ac_delim +-install_sh!$install_sh$ac_delim +-STRIP!$STRIP$ac_delim +-INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim +-mkdir_p!$mkdir_p$ac_delim +-AWK!$AWK$ac_delim +-SET_MAKE!$SET_MAKE$ac_delim +-am__leading_dot!$am__leading_dot$ac_delim +-AMTAR!$AMTAR$ac_delim +-am__tar!$am__tar$ac_delim +-am__untar!$am__untar$ac_delim +-CC!$CC$ac_delim +-CFLAGS!$CFLAGS$ac_delim +-LDFLAGS!$LDFLAGS$ac_delim +-CPPFLAGS!$CPPFLAGS$ac_delim +-ac_ct_CC!$ac_ct_CC$ac_delim +-EXEEXT!$EXEEXT$ac_delim +-OBJEXT!$OBJEXT$ac_delim +-DEPDIR!$DEPDIR$ac_delim +-am__include!$am__include$ac_delim +-am__quote!$am__quote$ac_delim +-AMDEP_TRUE!$AMDEP_TRUE$ac_delim +-AMDEP_FALSE!$AMDEP_FALSE$ac_delim +-AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim +-CCDEPMODE!$CCDEPMODE$ac_delim +-am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim +-am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim +-build!$build$ac_delim +-build_cpu!$build_cpu$ac_delim +-build_vendor!$build_vendor$ac_delim +-build_os!$build_os$ac_delim +-host!$host$ac_delim +-host_cpu!$host_cpu$ac_delim +-host_vendor!$host_vendor$ac_delim +-host_os!$host_os$ac_delim +-SED!$SED$ac_delim +-GREP!$GREP$ac_delim +-EGREP!$EGREP$ac_delim +-LN_S!$LN_S$ac_delim +-ECHO!$ECHO$ac_delim +-AR!$AR$ac_delim +-RANLIB!$RANLIB$ac_delim +-CPP!$CPP$ac_delim +-CXX!$CXX$ac_delim +-CXXFLAGS!$CXXFLAGS$ac_delim +-ac_ct_CXX!$ac_ct_CXX$ac_delim +-CXXDEPMODE!$CXXDEPMODE$ac_delim +-am__fastdepCXX_TRUE!$am__fastdepCXX_TRUE$ac_delim +-am__fastdepCXX_FALSE!$am__fastdepCXX_FALSE$ac_delim +-_ACEOF ++# Do we need the "lib" prefix for modules? ++need_lib_prefix=$need_lib_prefix + +- if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then +- break +- elif $ac_last_try; then +- { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +-echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} +- { (exit 1); exit 1; }; } +- else +- ac_delim="$ac_delim!$ac_delim _$ac_delim!! " +- fi +-done ++# Do we need a version for libraries? ++need_version=$need_version + +-ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` +-if test -n "$ac_eof"; then +- ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` +- ac_eof=`expr $ac_eof + 1` +-fi ++# Library versioning type. ++version_type=$version_type + +-cat >>$CONFIG_STATUS <<_ACEOF +-cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof +-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +-_ACEOF +-sed ' +-s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g +-s/^/s,@/; s/!/@,|#_!!_#|/ +-:n +-t n +-s/'"$ac_delim"'$/,g/; t +-s/$/\\/; p +-N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n +-' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF +-CEOF$ac_eof +-_ACEOF ++# Shared library runtime path variable. ++runpath_var=$runpath_var + ++# Shared library path variable. ++shlibpath_var=$shlibpath_var + +-ac_delim='%!_!# ' +-for ac_last_try in false false false false false :; do +- cat >conf$$subs.sed <<_ACEOF +-CXXCPP!$CXXCPP$ac_delim +-F77!$F77$ac_delim +-FFLAGS!$FFLAGS$ac_delim +-ac_ct_F77!$ac_ct_F77$ac_delim +-LIBTOOL!$LIBTOOL$ac_delim +-INTLTOOL_DESKTOP_RULE!$INTLTOOL_DESKTOP_RULE$ac_delim +-INTLTOOL_DIRECTORY_RULE!$INTLTOOL_DIRECTORY_RULE$ac_delim +-INTLTOOL_KEYS_RULE!$INTLTOOL_KEYS_RULE$ac_delim +-INTLTOOL_PROP_RULE!$INTLTOOL_PROP_RULE$ac_delim +-INTLTOOL_OAF_RULE!$INTLTOOL_OAF_RULE$ac_delim +-INTLTOOL_PONG_RULE!$INTLTOOL_PONG_RULE$ac_delim +-INTLTOOL_SERVER_RULE!$INTLTOOL_SERVER_RULE$ac_delim +-INTLTOOL_SHEET_RULE!$INTLTOOL_SHEET_RULE$ac_delim +-INTLTOOL_SOUNDLIST_RULE!$INTLTOOL_SOUNDLIST_RULE$ac_delim +-INTLTOOL_UI_RULE!$INTLTOOL_UI_RULE$ac_delim +-INTLTOOL_XAM_RULE!$INTLTOOL_XAM_RULE$ac_delim +-INTLTOOL_KBD_RULE!$INTLTOOL_KBD_RULE$ac_delim +-INTLTOOL_XML_RULE!$INTLTOOL_XML_RULE$ac_delim +-INTLTOOL_XML_NOMERGE_RULE!$INTLTOOL_XML_NOMERGE_RULE$ac_delim +-INTLTOOL_CAVES_RULE!$INTLTOOL_CAVES_RULE$ac_delim +-INTLTOOL_SCHEMAS_RULE!$INTLTOOL_SCHEMAS_RULE$ac_delim +-INTLTOOL_THEME_RULE!$INTLTOOL_THEME_RULE$ac_delim +-INTLTOOL_SERVICE_RULE!$INTLTOOL_SERVICE_RULE$ac_delim +-INTLTOOL_POLICY_RULE!$INTLTOOL_POLICY_RULE$ac_delim +-XGETTEXT!$XGETTEXT$ac_delim +-MSGMERGE!$MSGMERGE$ac_delim +-MSGFMT!$MSGFMT$ac_delim +-INTLTOOL_EXTRACT!$INTLTOOL_EXTRACT$ac_delim +-INTLTOOL_MERGE!$INTLTOOL_MERGE$ac_delim +-INTLTOOL_UPDATE!$INTLTOOL_UPDATE$ac_delim +-INTLTOOL_PERL!$INTLTOOL_PERL$ac_delim +-ALL_LINGUAS!$ALL_LINGUAS$ac_delim +-DATADIRNAME!$DATADIRNAME$ac_delim +-WARN_CFLAGS!$WARN_CFLAGS$ac_delim +-PKG_CONFIG!$PKG_CONFIG$ac_delim +-HELP_DIR!$HELP_DIR$ac_delim +-OMF_DIR!$OMF_DIR$ac_delim +-DOC_USER_FORMATS!$DOC_USER_FORMATS$ac_delim +-ENABLE_SK_TRUE!$ENABLE_SK_TRUE$ac_delim +-ENABLE_SK_FALSE!$ENABLE_SK_FALSE$ac_delim +-DISTCHECK_CONFIGURE_FLAGS!$DISTCHECK_CONFIGURE_FLAGS$ac_delim +-HAVE_GNOME_DOC_UTILS_TRUE!$HAVE_GNOME_DOC_UTILS_TRUE$ac_delim +-HAVE_GNOME_DOC_UTILS_FALSE!$HAVE_GNOME_DOC_UTILS_FALSE$ac_delim +-GLIB_GENMARSHAL!$GLIB_GENMARSHAL$ac_delim +-GETTEXT_PACKAGE!$GETTEXT_PACKAGE$ac_delim +-USE_NLS!$USE_NLS$ac_delim +-MSGFMT_OPTS!$MSGFMT_OPTS$ac_delim +-GMSGFMT!$GMSGFMT$ac_delim +-CATALOGS!$CATALOGS$ac_delim +-CATOBJEXT!$CATOBJEXT$ac_delim +-GMOFILES!$GMOFILES$ac_delim +-INSTOBJEXT!$INSTOBJEXT$ac_delim +-INTLLIBS!$INTLLIBS$ac_delim +-PO_IN_DATADIR_TRUE!$PO_IN_DATADIR_TRUE$ac_delim +-PO_IN_DATADIR_FALSE!$PO_IN_DATADIR_FALSE$ac_delim +-POFILES!$POFILES$ac_delim +-POSUB!$POSUB$ac_delim +-MKINSTALLDIRS!$MKINSTALLDIRS$ac_delim +-GLIB_REQUIRED!$GLIB_REQUIRED$ac_delim +-GTK_REQUIRED!$GTK_REQUIRED$ac_delim +-GDK_REQUIRED!$GDK_REQUIRED$ac_delim +-LIBGNOME_REQUIRED!$LIBGNOME_REQUIRED$ac_delim +-LIBGNOMEUI_REQUIRED!$LIBGNOMEUI_REQUIRED$ac_delim +-HAL_REQUIRED!$HAL_REQUIRED$ac_delim +-DBUS_REQUIRED!$DBUS_REQUIRED$ac_delim +-LIBGLADE_REQUIRED!$LIBGLADE_REQUIRED$ac_delim +-LIBNOTIFY_REQUIRED!$LIBNOTIFY_REQUIRED$ac_delim +-LIBWNCK_REQUIRED!$LIBWNCK_REQUIRED$ac_delim +-CAIRO_REQUIRED!$CAIRO_REQUIRED$ac_delim +-UNIQUE_REQUIRED!$UNIQUE_REQUIRED$ac_delim +-LIBPANEL_REQUIRED!$LIBPANEL_REQUIRED$ac_delim +-GSTREAMER_REQUIRED!$GSTREAMER_REQUIRED$ac_delim +-XRANDR_REQUIRED!$XRANDR_REQUIRED$ac_delim +-POLKIT_GNOME_REQUIRED!$POLKIT_GNOME_REQUIRED$ac_delim +-GLIB_CFLAGS!$GLIB_CFLAGS$ac_delim +-GLIB_LIBS!$GLIB_LIBS$ac_delim +-HAL_CFLAGS!$HAL_CFLAGS$ac_delim +-HAL_LIBS!$HAL_LIBS$ac_delim +-GSTREAMER_CFLAGS!$GSTREAMER_CFLAGS$ac_delim +-GSTREAMER_LIBS!$GSTREAMER_LIBS$ac_delim +-DBUS_CFLAGS!$DBUS_CFLAGS$ac_delim +-DBUS_LIBS!$DBUS_LIBS$ac_delim +-GNOME_CFLAGS!$GNOME_CFLAGS$ac_delim +-GNOME_LIBS!$GNOME_LIBS$ac_delim +-GDK_CFLAGS!$GDK_CFLAGS$ac_delim +-GDK_LIBS!$GDK_LIBS$ac_delim +-XRANDR_CFLAGS!$XRANDR_CFLAGS$ac_delim +-XRANDR_LIBS!$XRANDR_LIBS$ac_delim +-GCONFTOOL!$GCONFTOOL$ac_delim +-GCONF_SCHEMA_CONFIG_SOURCE!$GCONF_SCHEMA_CONFIG_SOURCE$ac_delim +-GCONF_SCHEMA_FILE_DIR!$GCONF_SCHEMA_FILE_DIR$ac_delim +-GCONF_SCHEMAS_INSTALL_TRUE!$GCONF_SCHEMAS_INSTALL_TRUE$ac_delim +-GCONF_SCHEMAS_INSTALL_FALSE!$GCONF_SCHEMAS_INSTALL_FALSE$ac_delim +-XMKMF!$XMKMF$ac_delim +-X_CFLAGS!$X_CFLAGS$ac_delim +-X_PRE_LIBS!$X_PRE_LIBS$ac_delim +-X_LIBS!$X_LIBS$ac_delim +-_ACEOF ++# Is shlibpath searched before the hard-coded library search path? ++shlibpath_overrides_runpath=$shlibpath_overrides_runpath ++ ++# Format of library name prefix. ++libname_spec=$lt_libname_spec ++ ++# List of archive names. First name is the real one, the rest are links. ++# The last name is the one that the linker finds with -lNAME ++library_names_spec=$lt_library_names_spec ++ ++# The coded name of the library, if different from the real name. ++soname_spec=$lt_soname_spec ++ ++# Command to use after installation of a shared archive. ++postinstall_cmds=$lt_postinstall_cmds ++ ++# Command to use after uninstallation of a shared archive. ++postuninstall_cmds=$lt_postuninstall_cmds + +- if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then +- break +- elif $ac_last_try; then +- { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +-echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} +- { (exit 1); exit 1; }; } +- else +- ac_delim="$ac_delim!$ac_delim _$ac_delim!! " +- fi +-done ++# Commands used to finish a libtool library installation in a directory. ++finish_cmds=$lt_finish_cmds + +-ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` +-if test -n "$ac_eof"; then +- ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` +- ac_eof=`expr $ac_eof + 1` +-fi ++# As "finish_cmds", except a single script fragment to be evaled but ++# not shown. ++finish_eval=$lt_finish_eval + +-cat >>$CONFIG_STATUS <<_ACEOF +-cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof +-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +-_ACEOF +-sed ' +-s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g +-s/^/s,@/; s/!/@,|#_!!_#|/ +-:n +-t n +-s/'"$ac_delim"'$/,g/; t +-s/$/\\/; p +-N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n +-' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF +-CEOF$ac_eof +-_ACEOF ++# Whether we should hardcode library paths into libraries. ++hardcode_into_libs=$hardcode_into_libs + ++# Compile-time system search path for libraries. ++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +-ac_delim='%!_!# ' +-for ac_last_try in false false false false false :; do +- cat >conf$$subs.sed <<_ACEOF +-X_EXTRA_LIBS!$X_EXTRA_LIBS$ac_delim +-SYSCONFDIR!$SYSCONFDIR$ac_delim +-DATADIR!$DATADIR$ac_delim +-BINDIR!$BINDIR$ac_delim +-SBINDIR!$SBINDIR$ac_delim +-DOCDIR!$DOCDIR$ac_delim +-POLKIT_CFLAGS!$POLKIT_CFLAGS$ac_delim +-POLKIT_LIBS!$POLKIT_LIBS$ac_delim +-HAVE_TESTS_TRUE!$HAVE_TESTS_TRUE$ac_delim +-HAVE_TESTS_FALSE!$HAVE_TESTS_FALSE$ac_delim +-POLKIT_GNOME_CFLAGS!$POLKIT_GNOME_CFLAGS$ac_delim +-POLKIT_GNOME_LIBS!$POLKIT_GNOME_LIBS$ac_delim +-HAVE_GCONF_DEFAULTS_TRUE!$HAVE_GCONF_DEFAULTS_TRUE$ac_delim +-HAVE_GCONF_DEFAULTS_FALSE!$HAVE_GCONF_DEFAULTS_FALSE$ac_delim +-HAVE_APPLETS_TRUE!$HAVE_APPLETS_TRUE$ac_delim +-HAVE_APPLETS_FALSE!$HAVE_APPLETS_FALSE$ac_delim +-XMLTO!$XMLTO$ac_delim +-DOCBOOK_DOCS_ENABLED_TRUE!$DOCBOOK_DOCS_ENABLED_TRUE$ac_delim +-DOCBOOK_DOCS_ENABLED_FALSE!$DOCBOOK_DOCS_ENABLED_FALSE$ac_delim +-DBUS_SERVICES_DIR!$DBUS_SERVICES_DIR$ac_delim +-LIBNOTIFY_CFLAGS!$LIBNOTIFY_CFLAGS$ac_delim +-LIBNOTIFY_LIBS!$LIBNOTIFY_LIBS$ac_delim +-HAVE_LIBNOTIFY_TRUE!$HAVE_LIBNOTIFY_TRUE$ac_delim +-HAVE_LIBNOTIFY_FALSE!$HAVE_LIBNOTIFY_FALSE$ac_delim +-UNIQUE_CFLAGS!$UNIQUE_CFLAGS$ac_delim +-UNIQUE_LIBS!$UNIQUE_LIBS$ac_delim +-HAVE_UNIQUE_TRUE!$HAVE_UNIQUE_TRUE$ac_delim +-HAVE_UNIQUE_FALSE!$HAVE_UNIQUE_FALSE$ac_delim +-GPM_EXTRA_LIBS!$GPM_EXTRA_LIBS$ac_delim +-DOCBOOK2MAN!$DOCBOOK2MAN$ac_delim +-HAVE_DOCBOOK2MAN_TRUE!$HAVE_DOCBOOK2MAN_TRUE$ac_delim +-HAVE_DOCBOOK2MAN_FALSE!$HAVE_DOCBOOK2MAN_FALSE$ac_delim +-LIBOBJS!$LIBOBJS$ac_delim +-LTLIBOBJS!$LTLIBOBJS$ac_delim +-_ACEOF ++# Run-time system search path for libraries. ++sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +- if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 34; then +- break +- elif $ac_last_try; then +- { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +-echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} +- { (exit 1); exit 1; }; } +- else +- ac_delim="$ac_delim!$ac_delim _$ac_delim!! " +- fi +-done ++# Whether dlopen is supported. ++dlopen_support=$enable_dlopen + +-ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` +-if test -n "$ac_eof"; then +- ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` +- ac_eof=`expr $ac_eof + 1` +-fi ++# Whether dlopen of programs is supported. ++dlopen_self=$enable_dlopen_self + +-cat >>$CONFIG_STATUS <<_ACEOF +-cat >"\$tmp/subs-3.sed" <<\CEOF$ac_eof +-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end +-_ACEOF +-sed ' +-s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g +-s/^/s,@/; s/!/@,|#_!!_#|/ +-:n +-t n +-s/'"$ac_delim"'$/,g/; t +-s/$/\\/; p +-N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n +-' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF +-:end +-s/|#_!!_#|//g +-CEOF$ac_eof +-_ACEOF ++# Whether dlopen of statically linked programs is supported. ++dlopen_self_static=$enable_dlopen_self_static + ++# Commands to strip libraries. ++old_striplib=$lt_old_striplib ++striplib=$lt_striplib + +-# VPATH may cause trouble with some makes, so we remove $(srcdir), +-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +-# trailing colons and then remove the whole line if VPATH becomes empty +-# (actually we leave an empty line to preserve line numbers). +-if test "x$srcdir" = x.; then +- ac_vpsub='/^[ ]*VPATH[ ]*=/{ +-s/:*\$(srcdir):*/:/ +-s/:*\${srcdir}:*/:/ +-s/:*@srcdir@:*/:/ +-s/^\([^=]*=[ ]*\):*/\1/ +-s/:*$// +-s/^[^=]*=[ ]*$// +-}' +-fi + +-cat >>$CONFIG_STATUS <<\_ACEOF +-fi # test -n "$CONFIG_FILES" ++# The linker used to build libraries. ++LD=$lt_LD + ++# Commands used to build an old-style archive. ++old_archive_cmds=$lt_old_archive_cmds + +-for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS +-do +- case $ac_tag in +- :[FHLC]) ac_mode=$ac_tag; continue;; +- esac +- case $ac_mode$ac_tag in +- :[FHL]*:*);; +- :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 +-echo "$as_me: error: Invalid tag $ac_tag." >&2;} +- { (exit 1); exit 1; }; };; +- :[FH]-) ac_tag=-:-;; +- :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; +- esac +- ac_save_IFS=$IFS +- IFS=: +- set x $ac_tag +- IFS=$ac_save_IFS +- shift +- ac_file=$1 +- shift ++# A language specific compiler. ++CC=$lt_compiler + +- case $ac_mode in +- :L) ac_source=$1;; +- :[FH]) +- ac_file_inputs= +- for ac_f +- do +- case $ac_f in +- -) ac_f="$tmp/stdin";; +- *) # Look for the file first in the build tree, then in the source tree +- # (if the path is not absolute). The absolute path cannot be DOS-style, +- # because $ac_f cannot contain `:'. +- test -f "$ac_f" || +- case $ac_f in +- [\\/$]*) false;; +- *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; +- esac || +- { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 +-echo "$as_me: error: cannot find input file: $ac_f" >&2;} +- { (exit 1); exit 1; }; };; +- esac +- ac_file_inputs="$ac_file_inputs $ac_f" +- done ++# Is the compiler the GNU compiler? ++with_gcc=$GCC + +- # Let's still pretend it is `configure' which instantiates (i.e., don't +- # use $as_me), people would be surprised to read: +- # /* config.h. Generated by config.status. */ +- configure_input="Generated from "`IFS=: +- echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." +- if test x"$ac_file" != x-; then +- configure_input="$ac_file. $configure_input" +- { echo "$as_me:$LINENO: creating $ac_file" >&5 +-echo "$as_me: creating $ac_file" >&6;} +- fi ++# Compiler flag to turn off builtin functions. ++no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag ++ ++# How to pass a linker flag through the compiler. ++wl=$lt_lt_prog_compiler_wl ++ ++# Additional compiler flags for building library objects. ++pic_flag=$lt_lt_prog_compiler_pic ++ ++# Compiler flag to prevent dynamic linking. ++link_static_flag=$lt_lt_prog_compiler_static ++ ++# Does compiler simultaneously support -c and -o options? ++compiler_c_o=$lt_lt_cv_prog_compiler_c_o ++ ++# Whether or not to add -lc for building shared libraries. ++build_libtool_need_lc=$archive_cmds_need_lc ++ ++# Whether or not to disallow shared libs when runtime libs are static. ++allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes ++ ++# Compiler flag to allow reflexive dlopens. ++export_dynamic_flag_spec=$lt_export_dynamic_flag_spec ++ ++# Compiler flag to generate shared objects directly from archives. ++whole_archive_flag_spec=$lt_whole_archive_flag_spec ++ ++# Whether the compiler copes with passing no objects directly. ++compiler_needs_object=$lt_compiler_needs_object ++ ++# Create an old-style archive from a shared archive. ++old_archive_from_new_cmds=$lt_old_archive_from_new_cmds ++ ++# Create a temporary old-style archive to link instead of a shared archive. ++old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds ++ ++# Commands used to build a shared archive. ++archive_cmds=$lt_archive_cmds ++archive_expsym_cmds=$lt_archive_expsym_cmds ++ ++# Commands used to build a loadable module if different from building ++# a shared archive. ++module_cmds=$lt_module_cmds ++module_expsym_cmds=$lt_module_expsym_cmds ++ ++# Whether we are building with GNU ld or not. ++with_gnu_ld=$lt_with_gnu_ld ++ ++# Flag that allows shared libraries with undefined symbols to be built. ++allow_undefined_flag=$lt_allow_undefined_flag ++ ++# Flag that enforces no undefined symbols. ++no_undefined_flag=$lt_no_undefined_flag ++ ++# Flag to hardcode \$libdir into a binary during linking. ++# This must work even if \$libdir does not exist ++hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec ++ ++# If ld is used when linking, flag to hardcode \$libdir into a binary ++# during linking. This must work even if \$libdir does not exist. ++hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld ++ ++# Whether we need a single "-rpath" flag with a separated argument. ++hardcode_libdir_separator=$lt_hardcode_libdir_separator ++ ++# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes ++# DIR into the resulting binary. ++hardcode_direct=$hardcode_direct ++ ++# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes ++# DIR into the resulting binary and the resulting library dependency is ++# "absolute",i.e impossible to change by setting \${shlibpath_var} if the ++# library is relocated. ++hardcode_direct_absolute=$hardcode_direct_absolute ++ ++# Set to "yes" if using the -LDIR flag during linking hardcodes DIR ++# into the resulting binary. ++hardcode_minus_L=$hardcode_minus_L ++ ++# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR ++# into the resulting binary. ++hardcode_shlibpath_var=$hardcode_shlibpath_var ++ ++# Set to "yes" if building a shared library automatically hardcodes DIR ++# into the library and all subsequent libraries and executables linked ++# against it. ++hardcode_automatic=$hardcode_automatic ++ ++# Set to yes if linker adds runtime paths of dependent libraries ++# to runtime path list. ++inherit_rpath=$inherit_rpath ++ ++# Whether libtool must link a program against all its dependency libraries. ++link_all_deplibs=$link_all_deplibs + +- case $ac_tag in +- *:-:* | *:-) cat >"$tmp/stdin";; +- esac +- ;; +- esac ++# Fix the shell variable \$srcfile for the compiler. ++fix_srcfile_path=$lt_fix_srcfile_path + +- ac_dir=`$as_dirname -- "$ac_file" || +-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$ac_file" : 'X\(//\)[^/]' \| \ +- X"$ac_file" : 'X\(//\)$' \| \ +- X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +-echo X"$ac_file" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)[^/].*/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)$/{ +- s//\1/ +- q +- } +- /^X\(\/\).*/{ +- s//\1/ +- q +- } +- s/.*/./; q'` +- { as_dir="$ac_dir" +- case $as_dir in #( +- -*) as_dir=./$as_dir;; +- esac +- test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { +- as_dirs= +- while :; do +- case $as_dir in #( +- *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( +- *) as_qdir=$as_dir;; +- esac +- as_dirs="'$as_qdir' $as_dirs" +- as_dir=`$as_dirname -- "$as_dir" || +-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$as_dir" : 'X\(//\)[^/]' \| \ +- X"$as_dir" : 'X\(//\)$' \| \ +- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +-echo X"$as_dir" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)[^/].*/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)$/{ +- s//\1/ +- q +- } +- /^X\(\/\).*/{ +- s//\1/ +- q +- } +- s/.*/./; q'` +- test -d "$as_dir" && break +- done +- test -z "$as_dirs" || eval "mkdir $as_dirs" +- } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +-echo "$as_me: error: cannot create directory $as_dir" >&2;} +- { (exit 1); exit 1; }; }; } +- ac_builddir=. ++# Set to "yes" if exported symbols are required. ++always_export_symbols=$always_export_symbols + +-case "$ac_dir" in +-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +-*) +- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` +- # A ".." for each directory in $ac_dir_suffix. +- ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` +- case $ac_top_builddir_sub in +- "") ac_top_builddir_sub=. ac_top_build_prefix= ;; +- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; +- esac ;; +-esac +-ac_abs_top_builddir=$ac_pwd +-ac_abs_builddir=$ac_pwd$ac_dir_suffix +-# for backward compatibility: +-ac_top_builddir=$ac_top_build_prefix ++# The commands to list exported symbols. ++export_symbols_cmds=$lt_export_symbols_cmds + +-case $srcdir in +- .) # We are building in place. +- ac_srcdir=. +- ac_top_srcdir=$ac_top_builddir_sub +- ac_abs_top_srcdir=$ac_pwd ;; +- [\\/]* | ?:[\\/]* ) # Absolute name. +- ac_srcdir=$srcdir$ac_dir_suffix; +- ac_top_srcdir=$srcdir +- ac_abs_top_srcdir=$srcdir ;; +- *) # Relative name. +- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix +- ac_top_srcdir=$ac_top_build_prefix$srcdir +- ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +-esac +-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix ++# Symbols that should not be listed in the preloaded symbols. ++exclude_expsyms=$lt_exclude_expsyms + ++# Symbols that must always be exported. ++include_expsyms=$lt_include_expsyms + +- case $ac_mode in +- :F) +- # +- # CONFIG_FILE +- # ++# Commands necessary for linking programs (against libraries) with templates. ++prelink_cmds=$lt_prelink_cmds + +- case $INSTALL in +- [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; +- *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; +- esac +- ac_MKDIR_P=$MKDIR_P +- case $MKDIR_P in +- [\\/$]* | ?:[\\/]* ) ;; +- */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; ++# Specify filename containing input files. ++file_list_spec=$lt_file_list_spec ++ ++# How to hardcode a shared library path into an executable. ++hardcode_action=$hardcode_action ++ ++# ### END LIBTOOL CONFIG ++ ++_LT_EOF ++ ++ case $host_os in ++ aix3*) ++ cat <<\_LT_EOF >> "$cfgfile" ++# AIX sometimes has problems with the GCC collect2 program. For some ++# reason, if we set the COLLECT_NAMES environment variable, the problems ++# vanish in a puff of smoke. ++if test "X${COLLECT_NAMES+set}" != Xset; then ++ COLLECT_NAMES= ++ export COLLECT_NAMES ++fi ++_LT_EOF ++ ;; + esac +-_ACEOF + +-cat >>$CONFIG_STATUS <<\_ACEOF +-# If the template does not know about datarootdir, expand it. +-# FIXME: This hack should be removed a few years after 2.60. +-ac_datarootdir_hack=; ac_datarootdir_seen= + +-case `sed -n '/datarootdir/ { +- p +- q +-} +-/@datadir@/p +-/@docdir@/p +-/@infodir@/p +-/@localedir@/p +-/@mandir@/p +-' $ac_file_inputs` in +-*datarootdir*) ac_datarootdir_seen=yes;; +-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) +- { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +-echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +-_ACEOF +-cat >>$CONFIG_STATUS <<_ACEOF +- ac_datarootdir_hack=' +- s&@datadir@&$datadir&g +- s&@docdir@&$docdir&g +- s&@infodir@&$infodir&g +- s&@localedir@&$localedir&g +- s&@mandir@&$mandir&g +- s&\\\${datarootdir}&$datarootdir&g' ;; +-esac +-_ACEOF ++ltmain="$ac_aux_dir/ltmain.sh" + +-# Neutralize VPATH when `$srcdir' = `.'. +-# Shell code in configure.ac might set extrasub. +-# FIXME: do we really want to maintain this feature? +-cat >>$CONFIG_STATUS <<_ACEOF +- sed "$ac_vpsub +-$extrasub +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF +-:t +-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +-s&@configure_input@&$configure_input&;t t +-s&@top_builddir@&$ac_top_builddir_sub&;t t +-s&@srcdir@&$ac_srcdir&;t t +-s&@abs_srcdir@&$ac_abs_srcdir&;t t +-s&@top_srcdir@&$ac_top_srcdir&;t t +-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +-s&@builddir@&$ac_builddir&;t t +-s&@abs_builddir@&$ac_abs_builddir&;t t +-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +-s&@INSTALL@&$ac_INSTALL&;t t +-s&@MKDIR_P@&$ac_MKDIR_P&;t t +-$ac_datarootdir_hack +-" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" | sed -f "$tmp/subs-3.sed" >$tmp/out + +-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && +- { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && +- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && +- { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' +-which seems to be undefined. Please make sure it is defined." >&5 +-echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +-which seems to be undefined. Please make sure it is defined." >&2;} ++ # We use sed instead of cat because bash on DJGPP gets confused if ++ # if finds mixed CR/LF and LF-only lines. Since sed operates in ++ # text mode, it properly converts lines to CR/LF. This bash problem ++ # is reportedly fixed, but why not run on old versions too? ++ sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ ++ || (rm -f "$cfgfile"; exit 1) + +- rm -f "$tmp/stdin" +- case $ac_file in +- -) cat "$tmp/out"; rm -f "$tmp/out";; +- *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; ++ case $xsi_shell in ++ yes) ++ cat << \_LT_EOF >> "$cfgfile" ++ ++# func_dirname file append nondir_replacement ++# Compute the dirname of FILE. If nonempty, add APPEND to the result, ++# otherwise set result to NONDIR_REPLACEMENT. ++func_dirname () ++{ ++ case ${1} in ++ */*) func_dirname_result="${1%/*}${2}" ;; ++ * ) func_dirname_result="${3}" ;; + esac +- ;; +- :H) +- # +- # CONFIG_HEADER +- # +-_ACEOF ++} + +-# Transform confdefs.h into a sed script `conftest.defines', that +-# substitutes the proper values into config.h.in to produce config.h. +-rm -f conftest.defines conftest.tail +-# First, append a space to every undef/define line, to ease matching. +-echo 's/$/ /' >conftest.defines +-# Then, protect against being on the right side of a sed subst, or in +-# an unquoted here document, in config.status. If some macros were +-# called several times there might be several #defines for the same +-# symbol, which is useless. But do not sort them, since the last +-# AC_DEFINE must be honored. +-ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +-# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where +-# NAME is the cpp macro being defined, VALUE is the value it is being given. +-# PARAMS is the parameter list in the macro definition--in most cases, it's +-# just an empty string. +-ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*' +-ac_dB='\\)[ (].*,\\1define\\2' +-ac_dC=' ' +-ac_dD=' ,' ++# func_basename file ++func_basename () ++{ ++ func_basename_result="${1##*/}" ++} + +-uniq confdefs.h | +- sed -n ' +- t rset +- :rset +- s/^[ ]*#[ ]*define[ ][ ]*// +- t ok +- d +- :ok +- s/[\\&,]/\\&/g +- s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p +- s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p +- ' >>conftest.defines ++# func_dirname_and_basename file append nondir_replacement ++# perform func_basename and func_dirname in a single function ++# call: ++# dirname: Compute the dirname of FILE. If nonempty, ++# add APPEND to the result, otherwise set result ++# to NONDIR_REPLACEMENT. ++# value returned in "$func_dirname_result" ++# basename: Compute filename of FILE. ++# value retuned in "$func_basename_result" ++# Implementation must be kept synchronized with func_dirname ++# and func_basename. For efficiency, we do not delegate to ++# those functions but instead duplicate the functionality here. ++func_dirname_and_basename () ++{ ++ case ${1} in ++ */*) func_dirname_result="${1%/*}${2}" ;; ++ * ) func_dirname_result="${3}" ;; ++ esac ++ func_basename_result="${1##*/}" ++} ++ ++# func_stripname prefix suffix name ++# strip PREFIX and SUFFIX off of NAME. ++# PREFIX and SUFFIX must not contain globbing or regex special ++# characters, hashes, percent signs, but SUFFIX may contain a leading ++# dot (in which case that matches only a dot). ++func_stripname () ++{ ++ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are ++ # positional parameters, so assign one to ordinary parameter first. ++ func_stripname_result=${3} ++ func_stripname_result=${func_stripname_result#"${1}"} ++ func_stripname_result=${func_stripname_result%"${2}"} ++} ++ ++# func_opt_split ++func_opt_split () ++{ ++ func_opt_split_opt=${1%%=*} ++ func_opt_split_arg=${1#*=} ++} ++ ++# func_lo2o object ++func_lo2o () ++{ ++ case ${1} in ++ *.lo) func_lo2o_result=${1%.lo}.${objext} ;; ++ *) func_lo2o_result=${1} ;; ++ esac ++} + +-# Remove the space that was appended to ease matching. +-# Then replace #undef with comments. This is necessary, for +-# example, in the case of _POSIX_SOURCE, which is predefined and required +-# on some systems where configure will not decide to define it. +-# (The regexp can be short, since the line contains either #define or #undef.) +-echo 's/ $// +-s,^[ #]*u.*,/* & */,' >>conftest.defines ++# func_xform libobj-or-source ++func_xform () ++{ ++ func_xform_result=${1%.*}.lo ++} + +-# Break up conftest.defines: +-ac_max_sed_lines=50 ++# func_arith arithmetic-term... ++func_arith () ++{ ++ func_arith_result=$(( $* )) ++} + +-# First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1" +-# Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2" +-# Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1" +-# et cetera. +-ac_in='$ac_file_inputs' +-ac_out='"$tmp/out1"' +-ac_nxt='"$tmp/out2"' ++# func_len string ++# STRING may not start with a hyphen. ++func_len () ++{ ++ func_len_result=${#1} ++} + +-while : +-do +- # Write a here document: +- cat >>$CONFIG_STATUS <<_ACEOF +- # First, check the format of the line: +- cat >"\$tmp/defines.sed" <<\\CEOF +-/^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def +-/^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def +-b +-:def +-_ACEOF +- sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS +- echo 'CEOF +- sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS +- ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in +- sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail +- grep . conftest.tail >/dev/null || break +- rm -f conftest.defines +- mv conftest.tail conftest.defines +-done +-rm -f conftest.defines conftest.tail ++_LT_EOF ++ ;; ++ *) # Bourne compatible functions. ++ cat << \_LT_EOF >> "$cfgfile" + +-echo "ac_result=$ac_in" >>$CONFIG_STATUS +-cat >>$CONFIG_STATUS <<\_ACEOF +- if test x"$ac_file" != x-; then +- echo "/* $configure_input */" >"$tmp/config.h" +- cat "$ac_result" >>"$tmp/config.h" +- if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then +- { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 +-echo "$as_me: $ac_file is unchanged" >&6;} +- else +- rm -f $ac_file +- mv "$tmp/config.h" $ac_file +- fi ++# func_dirname file append nondir_replacement ++# Compute the dirname of FILE. If nonempty, add APPEND to the result, ++# otherwise set result to NONDIR_REPLACEMENT. ++func_dirname () ++{ ++ # Extract subdirectory from the argument. ++ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` ++ if test "X$func_dirname_result" = "X${1}"; then ++ func_dirname_result="${3}" + else +- echo "/* $configure_input */" +- cat "$ac_result" ++ func_dirname_result="$func_dirname_result${2}" + fi +- rm -f "$tmp/out12" +-# Compute $ac_file's index in $config_headers. +-_am_arg=$ac_file +-_am_stamp_count=1 +-for _am_header in $config_headers :; do +- case $_am_header in +- $_am_arg | $_am_arg:* ) +- break ;; +- * ) +- _am_stamp_count=`expr $_am_stamp_count + 1` ;; +- esac +-done +-echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || +-$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$_am_arg" : 'X\(//\)[^/]' \| \ +- X"$_am_arg" : 'X\(//\)$' \| \ +- X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || +-echo X"$_am_arg" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)[^/].*/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)$/{ +- s//\1/ +- q +- } +- /^X\(\/\).*/{ +- s//\1/ +- q +- } +- s/.*/./; q'`/stamp-h$_am_stamp_count +- ;; ++} + +- :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5 +-echo "$as_me: executing $ac_file commands" >&6;} +- ;; ++# func_basename file ++func_basename () ++{ ++ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` ++} ++ ++ ++# func_stripname prefix suffix name ++# strip PREFIX and SUFFIX off of NAME. ++# PREFIX and SUFFIX must not contain globbing or regex special ++# characters, hashes, percent signs, but SUFFIX may contain a leading ++# dot (in which case that matches only a dot). ++# func_strip_suffix prefix name ++func_stripname () ++{ ++ case ${2} in ++ .*) func_stripname_result=`$ECHO "X${3}" \ ++ | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; ++ *) func_stripname_result=`$ECHO "X${3}" \ ++ | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; + esac ++} + ++# sed scripts: ++my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q' ++my_sed_long_arg='1s/^-[^=]*=//' + +- case $ac_file$ac_mode in +- "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do +- # Strip MF so we end up with the name of the file. +- mf=`echo "$mf" | sed -e 's/:.*$//'` +- # Check whether this is an Automake generated Makefile or not. +- # We used to match only the files named `Makefile.in', but +- # some people rename them; so instead we look at the file content. +- # Grep'ing the first line is not enough: some people post-process +- # each Makefile.in and add a new line on top of each file to say so. +- # Grep'ing the whole file is not good either: AIX grep has a line +- # limit of 2048, but all sed's we know have understand at least 4000. +- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then +- dirpart=`$as_dirname -- "$mf" || +-$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$mf" : 'X\(//\)[^/]' \| \ +- X"$mf" : 'X\(//\)$' \| \ +- X"$mf" : 'X\(/\)' \| . 2>/dev/null || +-echo X"$mf" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)[^/].*/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)$/{ +- s//\1/ +- q +- } +- /^X\(\/\).*/{ +- s//\1/ +- q +- } +- s/.*/./; q'` +- else +- continue +- fi +- # Extract the definition of DEPDIR, am__include, and am__quote +- # from the Makefile without running `make'. +- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` +- test -z "$DEPDIR" && continue +- am__include=`sed -n 's/^am__include = //p' < "$mf"` +- test -z "am__include" && continue +- am__quote=`sed -n 's/^am__quote = //p' < "$mf"` +- # When using ansi2knr, U may be empty or an underscore; expand it +- U=`sed -n 's/^U = //p' < "$mf"` +- # Find all dependency output files, they are included files with +- # $(DEPDIR) in their names. We invoke sed twice because it is the +- # simplest approach to changing $(DEPDIR) to its actual value in the +- # expansion. +- for file in `sed -n " +- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ +- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do +- # Make sure the directory exists. +- test -f "$dirpart/$file" && continue +- fdir=`$as_dirname -- "$file" || +-$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$file" : 'X\(//\)[^/]' \| \ +- X"$file" : 'X\(//\)$' \| \ +- X"$file" : 'X\(/\)' \| . 2>/dev/null || +-echo X"$file" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)[^/].*/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)$/{ +- s//\1/ +- q +- } +- /^X\(\/\).*/{ +- s//\1/ +- q +- } +- s/.*/./; q'` +- { as_dir=$dirpart/$fdir +- case $as_dir in #( +- -*) as_dir=./$as_dir;; ++# func_opt_split ++func_opt_split () ++{ ++ func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` ++ func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` ++} ++ ++# func_lo2o object ++func_lo2o () ++{ ++ func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` ++} ++ ++# func_xform libobj-or-source ++func_xform () ++{ ++ func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'` ++} ++ ++# func_arith arithmetic-term... ++func_arith () ++{ ++ func_arith_result=`expr "$@"` ++} ++ ++# func_len string ++# STRING may not start with a hyphen. ++func_len () ++{ ++ func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` ++} ++ ++_LT_EOF ++esac ++ ++case $lt_shell_append in ++ yes) ++ cat << \_LT_EOF >> "$cfgfile" ++ ++# func_append var value ++# Append VALUE to the end of shell variable VAR. ++func_append () ++{ ++ eval "$1+=\$2" ++} ++_LT_EOF ++ ;; ++ *) ++ cat << \_LT_EOF >> "$cfgfile" ++ ++# func_append var value ++# Append VALUE to the end of shell variable VAR. ++func_append () ++{ ++ eval "$1=\$$1\$2" ++} ++ ++_LT_EOF ++ ;; + esac +- test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { +- as_dirs= +- while :; do +- case $as_dir in #( +- *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( +- *) as_qdir=$as_dir;; +- esac +- as_dirs="'$as_qdir' $as_dirs" +- as_dir=`$as_dirname -- "$as_dir" || +-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$as_dir" : 'X\(//\)[^/]' \| \ +- X"$as_dir" : 'X\(//\)$' \| \ +- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +-echo X"$as_dir" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)[^/].*/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)$/{ +- s//\1/ +- q +- } +- /^X\(\/\).*/{ +- s//\1/ +- q +- } +- s/.*/./; q'` +- test -d "$as_dir" && break +- done +- test -z "$as_dirs" || eval "mkdir $as_dirs" +- } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +-echo "$as_me: error: cannot create directory $as_dir" >&2;} +- { (exit 1); exit 1; }; }; } +- # echo "creating $dirpart/$file" +- echo '# dummy' > "$dirpart/$file" +- done +-done ++ ++ ++ sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ ++ || (rm -f "$cfgfile"; exit 1) ++ ++ mv -f "$cfgfile" "$ofile" || ++ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") ++ chmod +x "$ofile" ++ + ;; + "intltool":C) + +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/data/icons/16x16/actions/Makefile.in gnome-power-manager-2.24.0.new/data/icons/16x16/actions/Makefile.in +--- gnome-power-manager-2.24.0/data/icons/16x16/actions/Makefile.in 2008-09-22 22:46:11.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/data/icons/16x16/actions/Makefile.in 2008-11-20 18:37:25.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,11 +14,15 @@ + + @SET_MAKE@ + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = ../../../.. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -36,7 +40,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -56,6 +63,8 @@ + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -71,10 +80,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -86,17 +91,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -120,8 +131,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -151,6 +175,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -163,16 +188,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -213,13 +242,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -231,7 +257,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -250,6 +275,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -259,11 +285,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + themedir = $(pkgdatadir)/icons/hicolor + size = 16x16 + context = actions +@@ -315,9 +338,13 @@ + + clean-libtool: + -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + install-iconsDATA: $(icons_DATA) + @$(NORMAL_INSTALL) +- test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" ++ test -z "$(iconsdir)" || $(mkdir_p) "$(DESTDIR)$(iconsdir)" + @list='$(icons_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ +@@ -340,21 +367,22 @@ + + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -370,7 +398,7 @@ + all-am: Makefile $(DATA) + installdirs: + for dir in "$(DESTDIR)$(iconsdir)"; do \ +- test -z "$$dir" || $(MKDIR_P) "$$dir"; \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: install-am + install-exec: install-exec-am +@@ -402,7 +430,7 @@ + + distclean: distclean-am + -rm -f Makefile +-distclean-am: clean-am distclean-generic ++distclean-am: clean-am distclean-generic distclean-libtool + + dvi: dvi-am + +@@ -416,20 +444,12 @@ + + install-data-am: install-iconsDATA + +-install-dvi: install-dvi-am +- + install-exec-am: + +-install-html: install-html-am +- + install-info: install-info-am + + install-man: + +-install-pdf: install-pdf-am +- +-install-ps: install-ps-am +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -448,21 +468,17 @@ + + ps-am: + +-uninstall-am: uninstall-iconsDATA +- +-.MAKE: install-am install-strip ++uninstall-am: uninstall-iconsDATA uninstall-info-am + + .PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am html html-am info info-am install install-am \ +- install-data install-data-am install-dvi install-dvi-am \ +- install-exec install-exec-am install-html install-html-am \ ++ install-data install-data-am install-exec install-exec-am \ + install-iconsDATA install-info install-info-am install-man \ +- install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ +- uninstall uninstall-am uninstall-iconsDATA ++ uninstall uninstall-am uninstall-iconsDATA uninstall-info-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/data/icons/16x16/apps/Makefile.in gnome-power-manager-2.24.0.new/data/icons/16x16/apps/Makefile.in +--- gnome-power-manager-2.24.0/data/icons/16x16/apps/Makefile.in 2008-09-22 22:46:11.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/data/icons/16x16/apps/Makefile.in 2008-11-20 18:37:25.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,11 +14,15 @@ + + @SET_MAKE@ + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = ../../../.. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -36,7 +40,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -56,6 +63,8 @@ + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -71,10 +80,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -86,17 +91,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -120,8 +131,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -151,6 +175,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -163,16 +188,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -213,13 +242,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -231,7 +257,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -250,6 +275,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -259,11 +285,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + themedir = $(datadir)/icons/hicolor + size = 16x16 + context = apps +@@ -317,9 +340,13 @@ + + clean-libtool: + -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + install-iconsDATA: $(icons_DATA) + @$(NORMAL_INSTALL) +- test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" ++ test -z "$(iconsdir)" || $(mkdir_p) "$(DESTDIR)$(iconsdir)" + @list='$(icons_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ +@@ -342,21 +369,22 @@ + + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -372,7 +400,7 @@ + all-am: Makefile $(DATA) + installdirs: + for dir in "$(DESTDIR)$(iconsdir)"; do \ +- test -z "$$dir" || $(MKDIR_P) "$$dir"; \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: install-am + install-exec: install-exec-am +@@ -404,7 +432,7 @@ + + distclean: distclean-am + -rm -f Makefile +-distclean-am: clean-am distclean-generic ++distclean-am: clean-am distclean-generic distclean-libtool + + dvi: dvi-am + +@@ -418,20 +446,12 @@ + + install-data-am: install-iconsDATA + +-install-dvi: install-dvi-am +- + install-exec-am: + +-install-html: install-html-am +- + install-info: install-info-am + + install-man: + +-install-pdf: install-pdf-am +- +-install-ps: install-ps-am +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -450,21 +470,17 @@ + + ps-am: + +-uninstall-am: uninstall-iconsDATA +- +-.MAKE: install-am install-strip ++uninstall-am: uninstall-iconsDATA uninstall-info-am + + .PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am html html-am info info-am install install-am \ +- install-data install-data-am install-dvi install-dvi-am \ +- install-exec install-exec-am install-html install-html-am \ ++ install-data install-data-am install-exec install-exec-am \ + install-iconsDATA install-info install-info-am install-man \ +- install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ +- uninstall uninstall-am uninstall-iconsDATA ++ uninstall uninstall-am uninstall-iconsDATA uninstall-info-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/data/icons/16x16/Makefile.in gnome-power-manager-2.24.0.new/data/icons/16x16/Makefile.in +--- gnome-power-manager-2.24.0/data/icons/16x16/Makefile.in 2008-09-22 22:46:11.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/data/icons/16x16/Makefile.in 2008-11-20 18:37:25.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -13,11 +13,15 @@ + # PARTICULAR PURPOSE. + + @SET_MAKE@ ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = ../../.. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -35,7 +39,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -45,19 +52,18 @@ + DIST_SOURCES = + RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ +- install-dvi-recursive install-exec-recursive \ +- install-html-recursive install-info-recursive \ +- install-pdf-recursive install-ps-recursive install-recursive \ +- installcheck-recursive installdirs-recursive pdf-recursive \ +- ps-recursive uninstall-recursive +-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ +- distclean-recursive maintainer-clean-recursive ++ install-exec-recursive install-info-recursive \ ++ install-recursive installcheck-recursive installdirs-recursive \ ++ pdf-recursive ps-recursive uninstall-info-recursive \ ++ uninstall-recursive + ETAGS = etags + CTAGS = ctags + DIST_SUBDIRS = $(SUBDIRS) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -73,10 +79,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -88,17 +90,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -122,8 +130,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -153,6 +174,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -165,16 +187,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -215,13 +241,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -233,7 +256,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -252,6 +274,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -261,11 +284,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + SUBDIRS = actions apps status + all: all-recursive + +@@ -306,6 +326,10 @@ + clean-libtool: + -rm -rf .libs _libs + ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: ++ + # This directory's subdirectories are mostly independent; you can cd + # into them and run `make' without going through this Makefile. + # To change the values of `make' variables: instead of editing Makefiles, +@@ -337,7 +361,8 @@ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +-$(RECURSIVE_CLEAN_TARGETS): ++mostlyclean-recursive clean-recursive distclean-recursive \ ++maintainer-clean-recursive: + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ +@@ -381,8 +406,8 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + mkid -fID $$unique + tags: TAGS + +@@ -407,8 +432,8 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +@@ -418,12 +443,13 @@ + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ ++ here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique +@@ -437,21 +463,22 @@ + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -465,7 +492,7 @@ + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ +- || $(MKDIR_P) "$(distdir)/$$subdir" \ ++ || $(mkdir_p) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ +@@ -473,8 +500,6 @@ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ +- am__remove_distdir=: \ +- am__skip_length_check=: \ + distdir) \ + || exit 1; \ + fi; \ +@@ -514,7 +539,8 @@ + + distclean: distclean-recursive + -rm -f Makefile +-distclean-am: clean-am distclean-generic distclean-tags ++distclean-am: clean-am distclean-generic distclean-libtool \ ++ distclean-tags + + dvi: dvi-recursive + +@@ -528,20 +554,12 @@ + + install-data-am: + +-install-dvi: install-dvi-recursive +- + install-exec-am: + +-install-html: install-html-recursive +- + install-info: install-info-recursive + + install-man: + +-install-pdf: install-pdf-recursive +- +-install-ps: install-ps-recursive +- + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -560,24 +578,22 @@ + + ps-am: + +-uninstall-am: ++uninstall-am: uninstall-info-am + +-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ +- install-strip ++uninstall-info: uninstall-info-recursive + +-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ +- all all-am check check-am clean clean-generic clean-libtool \ +- ctags ctags-recursive distclean distclean-generic \ +- distclean-libtool distclean-tags distdir dvi dvi-am html \ ++.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \ ++ clean clean-generic clean-libtool clean-recursive ctags \ ++ ctags-recursive distclean distclean-generic distclean-libtool \ ++ distclean-recursive distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ +- install-data-am install-dvi install-dvi-am install-exec \ +- install-exec-am install-html install-html-am install-info \ +- install-info-am install-man install-pdf install-pdf-am \ +- install-ps install-ps-am install-strip installcheck \ ++ install-data-am install-exec install-exec-am install-info \ ++ install-info-am install-man install-strip installcheck \ + installcheck-am installdirs installdirs-am maintainer-clean \ +- maintainer-clean-generic mostlyclean mostlyclean-generic \ +- mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ +- uninstall uninstall-am ++ maintainer-clean-generic maintainer-clean-recursive \ ++ mostlyclean mostlyclean-generic mostlyclean-libtool \ ++ mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \ ++ uninstall uninstall-am uninstall-info-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/data/icons/16x16/status/Makefile.in gnome-power-manager-2.24.0.new/data/icons/16x16/status/Makefile.in +--- gnome-power-manager-2.24.0/data/icons/16x16/status/Makefile.in 2008-09-22 22:46:11.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/data/icons/16x16/status/Makefile.in 2008-11-20 18:37:26.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,11 +14,15 @@ + + @SET_MAKE@ + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = ../../../.. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -36,7 +40,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -56,6 +63,8 @@ + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -71,10 +80,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -86,17 +91,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -120,8 +131,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -151,6 +175,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -163,16 +188,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -213,13 +242,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -231,7 +257,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -250,6 +275,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -259,11 +285,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + themedir = $(pkgdatadir)/icons/hicolor + size = 16x16 + context = status +@@ -362,9 +385,13 @@ + + clean-libtool: + -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + install-iconsDATA: $(icons_DATA) + @$(NORMAL_INSTALL) +- test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" ++ test -z "$(iconsdir)" || $(mkdir_p) "$(DESTDIR)$(iconsdir)" + @list='$(icons_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ +@@ -387,21 +414,22 @@ + + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -417,7 +445,7 @@ + all-am: Makefile $(DATA) + installdirs: + for dir in "$(DESTDIR)$(iconsdir)"; do \ +- test -z "$$dir" || $(MKDIR_P) "$$dir"; \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: install-am + install-exec: install-exec-am +@@ -449,7 +477,7 @@ + + distclean: distclean-am + -rm -f Makefile +-distclean-am: clean-am distclean-generic ++distclean-am: clean-am distclean-generic distclean-libtool + + dvi: dvi-am + +@@ -463,20 +491,12 @@ + + install-data-am: install-iconsDATA + +-install-dvi: install-dvi-am +- + install-exec-am: + +-install-html: install-html-am +- + install-info: install-info-am + + install-man: + +-install-pdf: install-pdf-am +- +-install-ps: install-ps-am +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -495,21 +515,17 @@ + + ps-am: + +-uninstall-am: uninstall-iconsDATA +- +-.MAKE: install-am install-strip ++uninstall-am: uninstall-iconsDATA uninstall-info-am + + .PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am html html-am info info-am install install-am \ +- install-data install-data-am install-dvi install-dvi-am \ +- install-exec install-exec-am install-html install-html-am \ ++ install-data install-data-am install-exec install-exec-am \ + install-iconsDATA install-info install-info-am install-man \ +- install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ +- uninstall uninstall-am uninstall-iconsDATA ++ uninstall uninstall-am uninstall-iconsDATA uninstall-info-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/data/icons/22x22/actions/Makefile.in gnome-power-manager-2.24.0.new/data/icons/22x22/actions/Makefile.in +--- gnome-power-manager-2.24.0/data/icons/22x22/actions/Makefile.in 2008-09-22 22:46:11.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/data/icons/22x22/actions/Makefile.in 2008-11-20 18:37:26.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,11 +14,15 @@ + + @SET_MAKE@ + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = ../../../.. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -36,7 +40,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -56,6 +63,8 @@ + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -71,10 +80,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -86,17 +91,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -120,8 +131,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -151,6 +175,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -163,16 +188,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -213,13 +242,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -231,7 +257,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -250,6 +275,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -259,11 +285,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + themedir = $(pkgdatadir)/icons/hicolor + size = 22x22 + context = actions +@@ -315,9 +338,13 @@ + + clean-libtool: + -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + install-iconsDATA: $(icons_DATA) + @$(NORMAL_INSTALL) +- test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" ++ test -z "$(iconsdir)" || $(mkdir_p) "$(DESTDIR)$(iconsdir)" + @list='$(icons_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ +@@ -340,21 +367,22 @@ + + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -370,7 +398,7 @@ + all-am: Makefile $(DATA) + installdirs: + for dir in "$(DESTDIR)$(iconsdir)"; do \ +- test -z "$$dir" || $(MKDIR_P) "$$dir"; \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: install-am + install-exec: install-exec-am +@@ -402,7 +430,7 @@ + + distclean: distclean-am + -rm -f Makefile +-distclean-am: clean-am distclean-generic ++distclean-am: clean-am distclean-generic distclean-libtool + + dvi: dvi-am + +@@ -416,20 +444,12 @@ + + install-data-am: install-iconsDATA + +-install-dvi: install-dvi-am +- + install-exec-am: + +-install-html: install-html-am +- + install-info: install-info-am + + install-man: + +-install-pdf: install-pdf-am +- +-install-ps: install-ps-am +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -448,21 +468,17 @@ + + ps-am: + +-uninstall-am: uninstall-iconsDATA +- +-.MAKE: install-am install-strip ++uninstall-am: uninstall-iconsDATA uninstall-info-am + + .PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am html html-am info info-am install install-am \ +- install-data install-data-am install-dvi install-dvi-am \ +- install-exec install-exec-am install-html install-html-am \ ++ install-data install-data-am install-exec install-exec-am \ + install-iconsDATA install-info install-info-am install-man \ +- install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ +- uninstall uninstall-am uninstall-iconsDATA ++ uninstall uninstall-am uninstall-iconsDATA uninstall-info-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/data/icons/22x22/apps/Makefile.in gnome-power-manager-2.24.0.new/data/icons/22x22/apps/Makefile.in +--- gnome-power-manager-2.24.0/data/icons/22x22/apps/Makefile.in 2008-09-22 22:46:12.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/data/icons/22x22/apps/Makefile.in 2008-11-20 18:37:26.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,11 +14,15 @@ + + @SET_MAKE@ + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = ../../../.. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -36,7 +40,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -56,6 +63,8 @@ + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -71,10 +80,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -86,17 +91,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -120,8 +131,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -151,6 +175,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -163,16 +188,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -213,13 +242,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -231,7 +257,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -250,6 +275,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -259,11 +285,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + themedir = $(datadir)/icons/hicolor + size = 22x22 + context = apps +@@ -317,9 +340,13 @@ + + clean-libtool: + -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + install-iconsDATA: $(icons_DATA) + @$(NORMAL_INSTALL) +- test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" ++ test -z "$(iconsdir)" || $(mkdir_p) "$(DESTDIR)$(iconsdir)" + @list='$(icons_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ +@@ -342,21 +369,22 @@ + + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -372,7 +400,7 @@ + all-am: Makefile $(DATA) + installdirs: + for dir in "$(DESTDIR)$(iconsdir)"; do \ +- test -z "$$dir" || $(MKDIR_P) "$$dir"; \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: install-am + install-exec: install-exec-am +@@ -404,7 +432,7 @@ + + distclean: distclean-am + -rm -f Makefile +-distclean-am: clean-am distclean-generic ++distclean-am: clean-am distclean-generic distclean-libtool + + dvi: dvi-am + +@@ -418,20 +446,12 @@ + + install-data-am: install-iconsDATA + +-install-dvi: install-dvi-am +- + install-exec-am: + +-install-html: install-html-am +- + install-info: install-info-am + + install-man: + +-install-pdf: install-pdf-am +- +-install-ps: install-ps-am +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -450,21 +470,17 @@ + + ps-am: + +-uninstall-am: uninstall-iconsDATA +- +-.MAKE: install-am install-strip ++uninstall-am: uninstall-iconsDATA uninstall-info-am + + .PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am html html-am info info-am install install-am \ +- install-data install-data-am install-dvi install-dvi-am \ +- install-exec install-exec-am install-html install-html-am \ ++ install-data install-data-am install-exec install-exec-am \ + install-iconsDATA install-info install-info-am install-man \ +- install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ +- uninstall uninstall-am uninstall-iconsDATA ++ uninstall uninstall-am uninstall-iconsDATA uninstall-info-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/data/icons/22x22/Makefile.in gnome-power-manager-2.24.0.new/data/icons/22x22/Makefile.in +--- gnome-power-manager-2.24.0/data/icons/22x22/Makefile.in 2008-09-22 22:46:11.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/data/icons/22x22/Makefile.in 2008-11-20 18:37:26.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -13,11 +13,15 @@ + # PARTICULAR PURPOSE. + + @SET_MAKE@ ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = ../../.. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -35,7 +39,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -45,19 +52,18 @@ + DIST_SOURCES = + RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ +- install-dvi-recursive install-exec-recursive \ +- install-html-recursive install-info-recursive \ +- install-pdf-recursive install-ps-recursive install-recursive \ +- installcheck-recursive installdirs-recursive pdf-recursive \ +- ps-recursive uninstall-recursive +-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ +- distclean-recursive maintainer-clean-recursive ++ install-exec-recursive install-info-recursive \ ++ install-recursive installcheck-recursive installdirs-recursive \ ++ pdf-recursive ps-recursive uninstall-info-recursive \ ++ uninstall-recursive + ETAGS = etags + CTAGS = ctags + DIST_SUBDIRS = $(SUBDIRS) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -73,10 +79,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -88,17 +90,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -122,8 +130,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -153,6 +174,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -165,16 +187,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -215,13 +241,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -233,7 +256,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -252,6 +274,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -261,11 +284,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + SUBDIRS = actions apps status + all: all-recursive + +@@ -306,6 +326,10 @@ + clean-libtool: + -rm -rf .libs _libs + ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: ++ + # This directory's subdirectories are mostly independent; you can cd + # into them and run `make' without going through this Makefile. + # To change the values of `make' variables: instead of editing Makefiles, +@@ -337,7 +361,8 @@ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +-$(RECURSIVE_CLEAN_TARGETS): ++mostlyclean-recursive clean-recursive distclean-recursive \ ++maintainer-clean-recursive: + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ +@@ -381,8 +406,8 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + mkid -fID $$unique + tags: TAGS + +@@ -407,8 +432,8 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +@@ -418,12 +443,13 @@ + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ ++ here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique +@@ -437,21 +463,22 @@ + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -465,7 +492,7 @@ + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ +- || $(MKDIR_P) "$(distdir)/$$subdir" \ ++ || $(mkdir_p) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ +@@ -473,8 +500,6 @@ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ +- am__remove_distdir=: \ +- am__skip_length_check=: \ + distdir) \ + || exit 1; \ + fi; \ +@@ -514,7 +539,8 @@ + + distclean: distclean-recursive + -rm -f Makefile +-distclean-am: clean-am distclean-generic distclean-tags ++distclean-am: clean-am distclean-generic distclean-libtool \ ++ distclean-tags + + dvi: dvi-recursive + +@@ -528,20 +554,12 @@ + + install-data-am: + +-install-dvi: install-dvi-recursive +- + install-exec-am: + +-install-html: install-html-recursive +- + install-info: install-info-recursive + + install-man: + +-install-pdf: install-pdf-recursive +- +-install-ps: install-ps-recursive +- + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -560,24 +578,22 @@ + + ps-am: + +-uninstall-am: ++uninstall-am: uninstall-info-am + +-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ +- install-strip ++uninstall-info: uninstall-info-recursive + +-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ +- all all-am check check-am clean clean-generic clean-libtool \ +- ctags ctags-recursive distclean distclean-generic \ +- distclean-libtool distclean-tags distdir dvi dvi-am html \ ++.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \ ++ clean clean-generic clean-libtool clean-recursive ctags \ ++ ctags-recursive distclean distclean-generic distclean-libtool \ ++ distclean-recursive distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ +- install-data-am install-dvi install-dvi-am install-exec \ +- install-exec-am install-html install-html-am install-info \ +- install-info-am install-man install-pdf install-pdf-am \ +- install-ps install-ps-am install-strip installcheck \ ++ install-data-am install-exec install-exec-am install-info \ ++ install-info-am install-man install-strip installcheck \ + installcheck-am installdirs installdirs-am maintainer-clean \ +- maintainer-clean-generic mostlyclean mostlyclean-generic \ +- mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ +- uninstall uninstall-am ++ maintainer-clean-generic maintainer-clean-recursive \ ++ mostlyclean mostlyclean-generic mostlyclean-libtool \ ++ mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \ ++ uninstall uninstall-am uninstall-info-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/data/icons/22x22/status/Makefile.in gnome-power-manager-2.24.0.new/data/icons/22x22/status/Makefile.in +--- gnome-power-manager-2.24.0/data/icons/22x22/status/Makefile.in 2008-09-22 22:46:12.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/data/icons/22x22/status/Makefile.in 2008-11-20 18:37:26.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,11 +14,15 @@ + + @SET_MAKE@ + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = ../../../.. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -36,7 +40,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -56,6 +63,8 @@ + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -71,10 +80,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -86,17 +91,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -120,8 +131,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -151,6 +175,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -163,16 +188,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -213,13 +242,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -231,7 +257,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -250,6 +275,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -259,11 +285,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + themedir = $(pkgdatadir)/icons/hicolor + size = 22x22 + context = status +@@ -362,9 +385,13 @@ + + clean-libtool: + -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + install-iconsDATA: $(icons_DATA) + @$(NORMAL_INSTALL) +- test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" ++ test -z "$(iconsdir)" || $(mkdir_p) "$(DESTDIR)$(iconsdir)" + @list='$(icons_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ +@@ -387,21 +414,22 @@ + + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -417,7 +445,7 @@ + all-am: Makefile $(DATA) + installdirs: + for dir in "$(DESTDIR)$(iconsdir)"; do \ +- test -z "$$dir" || $(MKDIR_P) "$$dir"; \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: install-am + install-exec: install-exec-am +@@ -449,7 +477,7 @@ + + distclean: distclean-am + -rm -f Makefile +-distclean-am: clean-am distclean-generic ++distclean-am: clean-am distclean-generic distclean-libtool + + dvi: dvi-am + +@@ -463,20 +491,12 @@ + + install-data-am: install-iconsDATA + +-install-dvi: install-dvi-am +- + install-exec-am: + +-install-html: install-html-am +- + install-info: install-info-am + + install-man: + +-install-pdf: install-pdf-am +- +-install-ps: install-ps-am +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -495,21 +515,17 @@ + + ps-am: + +-uninstall-am: uninstall-iconsDATA +- +-.MAKE: install-am install-strip ++uninstall-am: uninstall-iconsDATA uninstall-info-am + + .PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am html html-am info info-am install install-am \ +- install-data install-data-am install-dvi install-dvi-am \ +- install-exec install-exec-am install-html install-html-am \ ++ install-data install-data-am install-exec install-exec-am \ + install-iconsDATA install-info install-info-am install-man \ +- install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ +- uninstall uninstall-am uninstall-iconsDATA ++ uninstall uninstall-am uninstall-iconsDATA uninstall-info-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/data/icons/24x24/actions/Makefile.in gnome-power-manager-2.24.0.new/data/icons/24x24/actions/Makefile.in +--- gnome-power-manager-2.24.0/data/icons/24x24/actions/Makefile.in 2008-09-22 22:46:12.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/data/icons/24x24/actions/Makefile.in 2008-11-20 18:37:26.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,11 +14,15 @@ + + @SET_MAKE@ + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = ../../../.. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -36,7 +40,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -56,6 +63,8 @@ + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -71,10 +80,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -86,17 +91,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -120,8 +131,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -151,6 +175,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -163,16 +188,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -213,13 +242,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -231,7 +257,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -250,6 +275,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -259,11 +285,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + themedir = $(pkgdatadir)/icons/hicolor + size = 24x24 + context = actions +@@ -315,9 +338,13 @@ + + clean-libtool: + -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + install-iconsDATA: $(icons_DATA) + @$(NORMAL_INSTALL) +- test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" ++ test -z "$(iconsdir)" || $(mkdir_p) "$(DESTDIR)$(iconsdir)" + @list='$(icons_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ +@@ -340,21 +367,22 @@ + + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -370,7 +398,7 @@ + all-am: Makefile $(DATA) + installdirs: + for dir in "$(DESTDIR)$(iconsdir)"; do \ +- test -z "$$dir" || $(MKDIR_P) "$$dir"; \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: install-am + install-exec: install-exec-am +@@ -402,7 +430,7 @@ + + distclean: distclean-am + -rm -f Makefile +-distclean-am: clean-am distclean-generic ++distclean-am: clean-am distclean-generic distclean-libtool + + dvi: dvi-am + +@@ -416,20 +444,12 @@ + + install-data-am: install-iconsDATA + +-install-dvi: install-dvi-am +- + install-exec-am: + +-install-html: install-html-am +- + install-info: install-info-am + + install-man: + +-install-pdf: install-pdf-am +- +-install-ps: install-ps-am +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -448,21 +468,17 @@ + + ps-am: + +-uninstall-am: uninstall-iconsDATA +- +-.MAKE: install-am install-strip ++uninstall-am: uninstall-iconsDATA uninstall-info-am + + .PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am html html-am info info-am install install-am \ +- install-data install-data-am install-dvi install-dvi-am \ +- install-exec install-exec-am install-html install-html-am \ ++ install-data install-data-am install-exec install-exec-am \ + install-iconsDATA install-info install-info-am install-man \ +- install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ +- uninstall uninstall-am uninstall-iconsDATA ++ uninstall uninstall-am uninstall-iconsDATA uninstall-info-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/data/icons/24x24/apps/Makefile.in gnome-power-manager-2.24.0.new/data/icons/24x24/apps/Makefile.in +--- gnome-power-manager-2.24.0/data/icons/24x24/apps/Makefile.in 2008-09-22 22:46:12.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/data/icons/24x24/apps/Makefile.in 2008-11-20 18:37:26.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,11 +14,15 @@ + + @SET_MAKE@ + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = ../../../.. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -36,7 +40,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -56,6 +63,8 @@ + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -71,10 +80,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -86,17 +91,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -120,8 +131,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -151,6 +175,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -163,16 +188,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -213,13 +242,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -231,7 +257,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -250,6 +275,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -259,11 +285,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + themedir = $(datadir)/icons/hicolor + size = 24x24 + context = apps +@@ -317,9 +340,13 @@ + + clean-libtool: + -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + install-iconsDATA: $(icons_DATA) + @$(NORMAL_INSTALL) +- test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" ++ test -z "$(iconsdir)" || $(mkdir_p) "$(DESTDIR)$(iconsdir)" + @list='$(icons_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ +@@ -342,21 +369,22 @@ + + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -372,7 +400,7 @@ + all-am: Makefile $(DATA) + installdirs: + for dir in "$(DESTDIR)$(iconsdir)"; do \ +- test -z "$$dir" || $(MKDIR_P) "$$dir"; \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: install-am + install-exec: install-exec-am +@@ -404,7 +432,7 @@ + + distclean: distclean-am + -rm -f Makefile +-distclean-am: clean-am distclean-generic ++distclean-am: clean-am distclean-generic distclean-libtool + + dvi: dvi-am + +@@ -418,20 +446,12 @@ + + install-data-am: install-iconsDATA + +-install-dvi: install-dvi-am +- + install-exec-am: + +-install-html: install-html-am +- + install-info: install-info-am + + install-man: + +-install-pdf: install-pdf-am +- +-install-ps: install-ps-am +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -450,21 +470,17 @@ + + ps-am: + +-uninstall-am: uninstall-iconsDATA +- +-.MAKE: install-am install-strip ++uninstall-am: uninstall-iconsDATA uninstall-info-am + + .PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am html html-am info info-am install install-am \ +- install-data install-data-am install-dvi install-dvi-am \ +- install-exec install-exec-am install-html install-html-am \ ++ install-data install-data-am install-exec install-exec-am \ + install-iconsDATA install-info install-info-am install-man \ +- install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ +- uninstall uninstall-am uninstall-iconsDATA ++ uninstall uninstall-am uninstall-iconsDATA uninstall-info-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/data/icons/24x24/Makefile.in gnome-power-manager-2.24.0.new/data/icons/24x24/Makefile.in +--- gnome-power-manager-2.24.0/data/icons/24x24/Makefile.in 2008-09-22 22:46:12.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/data/icons/24x24/Makefile.in 2008-11-20 18:37:26.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -13,11 +13,15 @@ + # PARTICULAR PURPOSE. + + @SET_MAKE@ ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = ../../.. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -35,7 +39,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -45,19 +52,18 @@ + DIST_SOURCES = + RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ +- install-dvi-recursive install-exec-recursive \ +- install-html-recursive install-info-recursive \ +- install-pdf-recursive install-ps-recursive install-recursive \ +- installcheck-recursive installdirs-recursive pdf-recursive \ +- ps-recursive uninstall-recursive +-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ +- distclean-recursive maintainer-clean-recursive ++ install-exec-recursive install-info-recursive \ ++ install-recursive installcheck-recursive installdirs-recursive \ ++ pdf-recursive ps-recursive uninstall-info-recursive \ ++ uninstall-recursive + ETAGS = etags + CTAGS = ctags + DIST_SUBDIRS = $(SUBDIRS) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -73,10 +79,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -88,17 +90,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -122,8 +130,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -153,6 +174,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -165,16 +187,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -215,13 +241,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -233,7 +256,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -252,6 +274,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -261,11 +284,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + SUBDIRS = actions apps status + all: all-recursive + +@@ -306,6 +326,10 @@ + clean-libtool: + -rm -rf .libs _libs + ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: ++ + # This directory's subdirectories are mostly independent; you can cd + # into them and run `make' without going through this Makefile. + # To change the values of `make' variables: instead of editing Makefiles, +@@ -337,7 +361,8 @@ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +-$(RECURSIVE_CLEAN_TARGETS): ++mostlyclean-recursive clean-recursive distclean-recursive \ ++maintainer-clean-recursive: + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ +@@ -381,8 +406,8 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + mkid -fID $$unique + tags: TAGS + +@@ -407,8 +432,8 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +@@ -418,12 +443,13 @@ + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ ++ here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique +@@ -437,21 +463,22 @@ + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -465,7 +492,7 @@ + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ +- || $(MKDIR_P) "$(distdir)/$$subdir" \ ++ || $(mkdir_p) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ +@@ -473,8 +500,6 @@ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ +- am__remove_distdir=: \ +- am__skip_length_check=: \ + distdir) \ + || exit 1; \ + fi; \ +@@ -514,7 +539,8 @@ + + distclean: distclean-recursive + -rm -f Makefile +-distclean-am: clean-am distclean-generic distclean-tags ++distclean-am: clean-am distclean-generic distclean-libtool \ ++ distclean-tags + + dvi: dvi-recursive + +@@ -528,20 +554,12 @@ + + install-data-am: + +-install-dvi: install-dvi-recursive +- + install-exec-am: + +-install-html: install-html-recursive +- + install-info: install-info-recursive + + install-man: + +-install-pdf: install-pdf-recursive +- +-install-ps: install-ps-recursive +- + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -560,24 +578,22 @@ + + ps-am: + +-uninstall-am: ++uninstall-am: uninstall-info-am + +-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ +- install-strip ++uninstall-info: uninstall-info-recursive + +-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ +- all all-am check check-am clean clean-generic clean-libtool \ +- ctags ctags-recursive distclean distclean-generic \ +- distclean-libtool distclean-tags distdir dvi dvi-am html \ ++.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \ ++ clean clean-generic clean-libtool clean-recursive ctags \ ++ ctags-recursive distclean distclean-generic distclean-libtool \ ++ distclean-recursive distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ +- install-data-am install-dvi install-dvi-am install-exec \ +- install-exec-am install-html install-html-am install-info \ +- install-info-am install-man install-pdf install-pdf-am \ +- install-ps install-ps-am install-strip installcheck \ ++ install-data-am install-exec install-exec-am install-info \ ++ install-info-am install-man install-strip installcheck \ + installcheck-am installdirs installdirs-am maintainer-clean \ +- maintainer-clean-generic mostlyclean mostlyclean-generic \ +- mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ +- uninstall uninstall-am ++ maintainer-clean-generic maintainer-clean-recursive \ ++ mostlyclean mostlyclean-generic mostlyclean-libtool \ ++ mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \ ++ uninstall uninstall-am uninstall-info-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/data/icons/24x24/status/Makefile.in gnome-power-manager-2.24.0.new/data/icons/24x24/status/Makefile.in +--- gnome-power-manager-2.24.0/data/icons/24x24/status/Makefile.in 2008-09-22 22:46:12.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/data/icons/24x24/status/Makefile.in 2008-11-20 18:37:27.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,11 +14,15 @@ + + @SET_MAKE@ + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = ../../../.. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -36,7 +40,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -56,6 +63,8 @@ + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -71,10 +80,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -86,17 +91,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -120,8 +131,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -151,6 +175,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -163,16 +188,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -213,13 +242,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -231,7 +257,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -250,6 +275,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -259,11 +285,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + themedir = $(pkgdatadir)/icons/hicolor + size = 24x24 + context = status +@@ -362,9 +385,13 @@ + + clean-libtool: + -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + install-iconsDATA: $(icons_DATA) + @$(NORMAL_INSTALL) +- test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" ++ test -z "$(iconsdir)" || $(mkdir_p) "$(DESTDIR)$(iconsdir)" + @list='$(icons_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ +@@ -387,21 +414,22 @@ + + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -417,7 +445,7 @@ + all-am: Makefile $(DATA) + installdirs: + for dir in "$(DESTDIR)$(iconsdir)"; do \ +- test -z "$$dir" || $(MKDIR_P) "$$dir"; \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: install-am + install-exec: install-exec-am +@@ -449,7 +477,7 @@ + + distclean: distclean-am + -rm -f Makefile +-distclean-am: clean-am distclean-generic ++distclean-am: clean-am distclean-generic distclean-libtool + + dvi: dvi-am + +@@ -463,20 +491,12 @@ + + install-data-am: install-iconsDATA + +-install-dvi: install-dvi-am +- + install-exec-am: + +-install-html: install-html-am +- + install-info: install-info-am + + install-man: + +-install-pdf: install-pdf-am +- +-install-ps: install-ps-am +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -495,21 +515,17 @@ + + ps-am: + +-uninstall-am: uninstall-iconsDATA +- +-.MAKE: install-am install-strip ++uninstall-am: uninstall-iconsDATA uninstall-info-am + + .PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am html html-am info info-am install install-am \ +- install-data install-data-am install-dvi install-dvi-am \ +- install-exec install-exec-am install-html install-html-am \ ++ install-data install-data-am install-exec install-exec-am \ + install-iconsDATA install-info install-info-am install-man \ +- install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ +- uninstall uninstall-am uninstall-iconsDATA ++ uninstall uninstall-am uninstall-iconsDATA uninstall-info-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/data/icons/48x48/actions/Makefile.in gnome-power-manager-2.24.0.new/data/icons/48x48/actions/Makefile.in +--- gnome-power-manager-2.24.0/data/icons/48x48/actions/Makefile.in 2008-09-22 22:46:12.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/data/icons/48x48/actions/Makefile.in 2008-11-20 18:37:27.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,11 +14,15 @@ + + @SET_MAKE@ + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = ../../../.. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -36,7 +40,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -56,6 +63,8 @@ + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -71,10 +80,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -86,17 +91,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -120,8 +131,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -151,6 +175,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -163,16 +188,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -213,13 +242,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -231,7 +257,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -250,6 +275,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -259,11 +285,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + themedir = $(pkgdatadir)/icons/hicolor + size = 48x48 + context = actions +@@ -315,9 +338,13 @@ + + clean-libtool: + -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + install-iconsDATA: $(icons_DATA) + @$(NORMAL_INSTALL) +- test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" ++ test -z "$(iconsdir)" || $(mkdir_p) "$(DESTDIR)$(iconsdir)" + @list='$(icons_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ +@@ -340,21 +367,22 @@ + + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -370,7 +398,7 @@ + all-am: Makefile $(DATA) + installdirs: + for dir in "$(DESTDIR)$(iconsdir)"; do \ +- test -z "$$dir" || $(MKDIR_P) "$$dir"; \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: install-am + install-exec: install-exec-am +@@ -402,7 +430,7 @@ + + distclean: distclean-am + -rm -f Makefile +-distclean-am: clean-am distclean-generic ++distclean-am: clean-am distclean-generic distclean-libtool + + dvi: dvi-am + +@@ -416,20 +444,12 @@ + + install-data-am: install-iconsDATA + +-install-dvi: install-dvi-am +- + install-exec-am: + +-install-html: install-html-am +- + install-info: install-info-am + + install-man: + +-install-pdf: install-pdf-am +- +-install-ps: install-ps-am +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -448,21 +468,17 @@ + + ps-am: + +-uninstall-am: uninstall-iconsDATA +- +-.MAKE: install-am install-strip ++uninstall-am: uninstall-iconsDATA uninstall-info-am + + .PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am html html-am info info-am install install-am \ +- install-data install-data-am install-dvi install-dvi-am \ +- install-exec install-exec-am install-html install-html-am \ ++ install-data install-data-am install-exec install-exec-am \ + install-iconsDATA install-info install-info-am install-man \ +- install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ +- uninstall uninstall-am uninstall-iconsDATA ++ uninstall uninstall-am uninstall-iconsDATA uninstall-info-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/data/icons/48x48/apps/Makefile.in gnome-power-manager-2.24.0.new/data/icons/48x48/apps/Makefile.in +--- gnome-power-manager-2.24.0/data/icons/48x48/apps/Makefile.in 2008-09-22 22:46:12.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/data/icons/48x48/apps/Makefile.in 2008-11-20 18:37:27.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,11 +14,15 @@ + + @SET_MAKE@ + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = ../../../.. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -36,7 +40,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -56,6 +63,8 @@ + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -71,10 +80,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -86,17 +91,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -120,8 +131,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -151,6 +175,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -163,16 +188,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -213,13 +242,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -231,7 +257,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -250,6 +275,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -259,11 +285,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + themedir = $(datadir)/icons/hicolor + size = 48x48 + context = apps +@@ -317,9 +340,13 @@ + + clean-libtool: + -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + install-iconsDATA: $(icons_DATA) + @$(NORMAL_INSTALL) +- test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" ++ test -z "$(iconsdir)" || $(mkdir_p) "$(DESTDIR)$(iconsdir)" + @list='$(icons_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ +@@ -342,21 +369,22 @@ + + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -372,7 +400,7 @@ + all-am: Makefile $(DATA) + installdirs: + for dir in "$(DESTDIR)$(iconsdir)"; do \ +- test -z "$$dir" || $(MKDIR_P) "$$dir"; \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: install-am + install-exec: install-exec-am +@@ -404,7 +432,7 @@ + + distclean: distclean-am + -rm -f Makefile +-distclean-am: clean-am distclean-generic ++distclean-am: clean-am distclean-generic distclean-libtool + + dvi: dvi-am + +@@ -418,20 +446,12 @@ + + install-data-am: install-iconsDATA + +-install-dvi: install-dvi-am +- + install-exec-am: + +-install-html: install-html-am +- + install-info: install-info-am + + install-man: + +-install-pdf: install-pdf-am +- +-install-ps: install-ps-am +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -450,21 +470,17 @@ + + ps-am: + +-uninstall-am: uninstall-iconsDATA +- +-.MAKE: install-am install-strip ++uninstall-am: uninstall-iconsDATA uninstall-info-am + + .PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am html html-am info info-am install install-am \ +- install-data install-data-am install-dvi install-dvi-am \ +- install-exec install-exec-am install-html install-html-am \ ++ install-data install-data-am install-exec install-exec-am \ + install-iconsDATA install-info install-info-am install-man \ +- install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ +- uninstall uninstall-am uninstall-iconsDATA ++ uninstall uninstall-am uninstall-iconsDATA uninstall-info-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/data/icons/48x48/Makefile.in gnome-power-manager-2.24.0.new/data/icons/48x48/Makefile.in +--- gnome-power-manager-2.24.0/data/icons/48x48/Makefile.in 2008-09-22 22:46:12.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/data/icons/48x48/Makefile.in 2008-11-20 18:37:27.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -13,11 +13,15 @@ + # PARTICULAR PURPOSE. + + @SET_MAKE@ ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = ../../.. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -35,7 +39,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -45,19 +52,18 @@ + DIST_SOURCES = + RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ +- install-dvi-recursive install-exec-recursive \ +- install-html-recursive install-info-recursive \ +- install-pdf-recursive install-ps-recursive install-recursive \ +- installcheck-recursive installdirs-recursive pdf-recursive \ +- ps-recursive uninstall-recursive +-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ +- distclean-recursive maintainer-clean-recursive ++ install-exec-recursive install-info-recursive \ ++ install-recursive installcheck-recursive installdirs-recursive \ ++ pdf-recursive ps-recursive uninstall-info-recursive \ ++ uninstall-recursive + ETAGS = etags + CTAGS = ctags + DIST_SUBDIRS = $(SUBDIRS) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -73,10 +79,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -88,17 +90,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -122,8 +130,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -153,6 +174,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -165,16 +187,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -215,13 +241,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -233,7 +256,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -252,6 +274,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -261,11 +284,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + SUBDIRS = actions apps status + all: all-recursive + +@@ -306,6 +326,10 @@ + clean-libtool: + -rm -rf .libs _libs + ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: ++ + # This directory's subdirectories are mostly independent; you can cd + # into them and run `make' without going through this Makefile. + # To change the values of `make' variables: instead of editing Makefiles, +@@ -337,7 +361,8 @@ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +-$(RECURSIVE_CLEAN_TARGETS): ++mostlyclean-recursive clean-recursive distclean-recursive \ ++maintainer-clean-recursive: + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ +@@ -381,8 +406,8 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + mkid -fID $$unique + tags: TAGS + +@@ -407,8 +432,8 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +@@ -418,12 +443,13 @@ + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ ++ here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique +@@ -437,21 +463,22 @@ + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -465,7 +492,7 @@ + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ +- || $(MKDIR_P) "$(distdir)/$$subdir" \ ++ || $(mkdir_p) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ +@@ -473,8 +500,6 @@ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ +- am__remove_distdir=: \ +- am__skip_length_check=: \ + distdir) \ + || exit 1; \ + fi; \ +@@ -514,7 +539,8 @@ + + distclean: distclean-recursive + -rm -f Makefile +-distclean-am: clean-am distclean-generic distclean-tags ++distclean-am: clean-am distclean-generic distclean-libtool \ ++ distclean-tags + + dvi: dvi-recursive + +@@ -528,20 +554,12 @@ + + install-data-am: + +-install-dvi: install-dvi-recursive +- + install-exec-am: + +-install-html: install-html-recursive +- + install-info: install-info-recursive + + install-man: + +-install-pdf: install-pdf-recursive +- +-install-ps: install-ps-recursive +- + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -560,24 +578,22 @@ + + ps-am: + +-uninstall-am: ++uninstall-am: uninstall-info-am + +-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ +- install-strip ++uninstall-info: uninstall-info-recursive + +-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ +- all all-am check check-am clean clean-generic clean-libtool \ +- ctags ctags-recursive distclean distclean-generic \ +- distclean-libtool distclean-tags distdir dvi dvi-am html \ ++.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \ ++ clean clean-generic clean-libtool clean-recursive ctags \ ++ ctags-recursive distclean distclean-generic distclean-libtool \ ++ distclean-recursive distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ +- install-data-am install-dvi install-dvi-am install-exec \ +- install-exec-am install-html install-html-am install-info \ +- install-info-am install-man install-pdf install-pdf-am \ +- install-ps install-ps-am install-strip installcheck \ ++ install-data-am install-exec install-exec-am install-info \ ++ install-info-am install-man install-strip installcheck \ + installcheck-am installdirs installdirs-am maintainer-clean \ +- maintainer-clean-generic mostlyclean mostlyclean-generic \ +- mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ +- uninstall uninstall-am ++ maintainer-clean-generic maintainer-clean-recursive \ ++ mostlyclean mostlyclean-generic mostlyclean-libtool \ ++ mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \ ++ uninstall uninstall-am uninstall-info-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/data/icons/48x48/status/Makefile.in gnome-power-manager-2.24.0.new/data/icons/48x48/status/Makefile.in +--- gnome-power-manager-2.24.0/data/icons/48x48/status/Makefile.in 2008-09-22 22:46:12.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/data/icons/48x48/status/Makefile.in 2008-11-20 18:37:27.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,11 +14,15 @@ + + @SET_MAKE@ + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = ../../../.. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -36,7 +40,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -56,6 +63,8 @@ + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -71,10 +80,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -86,17 +91,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -120,8 +131,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -151,6 +175,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -163,16 +188,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -213,13 +242,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -231,7 +257,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -250,6 +275,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -259,11 +285,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + themedir = $(pkgdatadir)/icons/hicolor + size = 48x48 + context = status +@@ -362,9 +385,13 @@ + + clean-libtool: + -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + install-iconsDATA: $(icons_DATA) + @$(NORMAL_INSTALL) +- test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" ++ test -z "$(iconsdir)" || $(mkdir_p) "$(DESTDIR)$(iconsdir)" + @list='$(icons_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ +@@ -387,21 +414,22 @@ + + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -417,7 +445,7 @@ + all-am: Makefile $(DATA) + installdirs: + for dir in "$(DESTDIR)$(iconsdir)"; do \ +- test -z "$$dir" || $(MKDIR_P) "$$dir"; \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: install-am + install-exec: install-exec-am +@@ -449,7 +477,7 @@ + + distclean: distclean-am + -rm -f Makefile +-distclean-am: clean-am distclean-generic ++distclean-am: clean-am distclean-generic distclean-libtool + + dvi: dvi-am + +@@ -463,20 +491,12 @@ + + install-data-am: install-iconsDATA + +-install-dvi: install-dvi-am +- + install-exec-am: + +-install-html: install-html-am +- + install-info: install-info-am + + install-man: + +-install-pdf: install-pdf-am +- +-install-ps: install-ps-am +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -495,21 +515,17 @@ + + ps-am: + +-uninstall-am: uninstall-iconsDATA +- +-.MAKE: install-am install-strip ++uninstall-am: uninstall-iconsDATA uninstall-info-am + + .PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am html html-am info info-am install install-am \ +- install-data install-data-am install-dvi install-dvi-am \ +- install-exec install-exec-am install-html install-html-am \ ++ install-data install-data-am install-exec install-exec-am \ + install-iconsDATA install-info install-info-am install-man \ +- install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ +- uninstall uninstall-am uninstall-iconsDATA ++ uninstall uninstall-am uninstall-iconsDATA uninstall-info-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/data/icons/Makefile.in gnome-power-manager-2.24.0.new/data/icons/Makefile.in +--- gnome-power-manager-2.24.0/data/icons/Makefile.in 2008-11-20 18:36:55.000000000 +0100 ++++ gnome-power-manager-2.24.0.new/data/icons/Makefile.in 2008-11-20 18:37:27.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -13,11 +13,15 @@ + # PARTICULAR PURPOSE. + + @SET_MAKE@ ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = ../.. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -35,7 +39,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -45,19 +52,18 @@ + DIST_SOURCES = + RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ +- install-dvi-recursive install-exec-recursive \ +- install-html-recursive install-info-recursive \ +- install-pdf-recursive install-ps-recursive install-recursive \ +- installcheck-recursive installdirs-recursive pdf-recursive \ +- ps-recursive uninstall-recursive +-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ +- distclean-recursive maintainer-clean-recursive ++ install-exec-recursive install-info-recursive \ ++ install-recursive installcheck-recursive installdirs-recursive \ ++ pdf-recursive ps-recursive uninstall-info-recursive \ ++ uninstall-recursive + ETAGS = etags + CTAGS = ctags + DIST_SUBDIRS = $(SUBDIRS) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -73,10 +79,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -88,17 +90,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -122,8 +130,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -153,6 +174,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -165,16 +187,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -215,13 +241,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -233,7 +256,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -252,6 +274,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -261,11 +284,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + SUBDIRS = scalable 16x16 22x22 24x24 48x48 + gtk_update_icon_cache = gtk-update-icon-cache -f -t $(pkgdatadir)/icons/hicolor + all: all-recursive +@@ -307,6 +327,10 @@ + clean-libtool: + -rm -rf .libs _libs + ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: ++ + # This directory's subdirectories are mostly independent; you can cd + # into them and run `make' without going through this Makefile. + # To change the values of `make' variables: instead of editing Makefiles, +@@ -338,7 +362,8 @@ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +-$(RECURSIVE_CLEAN_TARGETS): ++mostlyclean-recursive clean-recursive distclean-recursive \ ++maintainer-clean-recursive: + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ +@@ -382,8 +407,8 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + mkid -fID $$unique + tags: TAGS + +@@ -408,8 +433,8 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +@@ -419,12 +444,13 @@ + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ ++ here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique +@@ -438,21 +464,22 @@ + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -466,7 +493,7 @@ + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ +- || $(MKDIR_P) "$(distdir)/$$subdir" \ ++ || $(mkdir_p) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ +@@ -474,8 +501,6 @@ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ +- am__remove_distdir=: \ +- am__skip_length_check=: \ + distdir) \ + || exit 1; \ + fi; \ +@@ -515,7 +540,8 @@ + + distclean: distclean-recursive + -rm -f Makefile +-distclean-am: clean-am distclean-generic distclean-tags ++distclean-am: clean-am distclean-generic distclean-libtool \ ++ distclean-tags + + dvi: dvi-recursive + +@@ -531,20 +557,12 @@ + @$(NORMAL_INSTALL) + $(MAKE) $(AM_MAKEFLAGS) install-data-hook + +-install-dvi: install-dvi-recursive +- + install-exec-am: + +-install-html: install-html-recursive +- + install-info: install-info-recursive + + install-man: + +-install-pdf: install-pdf-recursive +- +-install-ps: install-ps-recursive +- + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -563,26 +581,25 @@ + + ps-am: + +-uninstall-am: ++uninstall-am: uninstall-info-am + @$(NORMAL_INSTALL) + $(MAKE) $(AM_MAKEFLAGS) uninstall-hook + +-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ +- install-data-am install-strip uninstall-am ++uninstall-info: uninstall-info-recursive + +-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ +- all all-am check check-am clean clean-generic clean-libtool \ +- ctags ctags-recursive distclean distclean-generic \ +- distclean-libtool distclean-tags distdir dvi dvi-am html \ ++.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \ ++ clean clean-generic clean-libtool clean-recursive ctags \ ++ ctags-recursive distclean distclean-generic distclean-libtool \ ++ distclean-recursive distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ +- install-data-am install-data-hook install-dvi install-dvi-am \ +- install-exec install-exec-am install-html install-html-am \ +- install-info install-info-am install-man install-pdf \ +- install-pdf-am install-ps install-ps-am install-strip \ ++ install-data-am install-data-hook install-exec install-exec-am \ ++ install-info install-info-am install-man install-strip \ + installcheck installcheck-am installdirs installdirs-am \ +- maintainer-clean maintainer-clean-generic mostlyclean \ +- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ +- tags tags-recursive uninstall uninstall-am uninstall-hook ++ maintainer-clean maintainer-clean-generic \ ++ maintainer-clean-recursive mostlyclean mostlyclean-generic \ ++ mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \ ++ tags tags-recursive uninstall uninstall-am uninstall-hook \ ++ uninstall-info-am + + + install-data-hook: update-icon-cache +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/data/icons/scalable/actions/Makefile.in gnome-power-manager-2.24.0.new/data/icons/scalable/actions/Makefile.in +--- gnome-power-manager-2.24.0/data/icons/scalable/actions/Makefile.in 2008-09-22 22:46:13.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/data/icons/scalable/actions/Makefile.in 2008-11-20 18:37:28.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,11 +14,15 @@ + + @SET_MAKE@ + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = ../../../.. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -36,7 +40,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -56,6 +63,8 @@ + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -71,10 +80,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -86,17 +91,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -120,8 +131,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -151,6 +175,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -163,16 +188,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -213,13 +242,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -231,7 +257,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -250,6 +275,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -259,11 +285,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + themedir = $(pkgdatadir)/icons/hicolor + size = scalable + context = actions +@@ -315,9 +338,13 @@ + + clean-libtool: + -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + install-iconsDATA: $(icons_DATA) + @$(NORMAL_INSTALL) +- test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" ++ test -z "$(iconsdir)" || $(mkdir_p) "$(DESTDIR)$(iconsdir)" + @list='$(icons_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ +@@ -340,21 +367,22 @@ + + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -370,7 +398,7 @@ + all-am: Makefile $(DATA) + installdirs: + for dir in "$(DESTDIR)$(iconsdir)"; do \ +- test -z "$$dir" || $(MKDIR_P) "$$dir"; \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: install-am + install-exec: install-exec-am +@@ -402,7 +430,7 @@ + + distclean: distclean-am + -rm -f Makefile +-distclean-am: clean-am distclean-generic ++distclean-am: clean-am distclean-generic distclean-libtool + + dvi: dvi-am + +@@ -416,20 +444,12 @@ + + install-data-am: install-iconsDATA + +-install-dvi: install-dvi-am +- + install-exec-am: + +-install-html: install-html-am +- + install-info: install-info-am + + install-man: + +-install-pdf: install-pdf-am +- +-install-ps: install-ps-am +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -448,21 +468,17 @@ + + ps-am: + +-uninstall-am: uninstall-iconsDATA +- +-.MAKE: install-am install-strip ++uninstall-am: uninstall-iconsDATA uninstall-info-am + + .PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am html html-am info info-am install install-am \ +- install-data install-data-am install-dvi install-dvi-am \ +- install-exec install-exec-am install-html install-html-am \ ++ install-data install-data-am install-exec install-exec-am \ + install-iconsDATA install-info install-info-am install-man \ +- install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ +- uninstall uninstall-am uninstall-iconsDATA ++ uninstall uninstall-am uninstall-iconsDATA uninstall-info-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/data/icons/scalable/apps/Makefile.in gnome-power-manager-2.24.0.new/data/icons/scalable/apps/Makefile.in +--- gnome-power-manager-2.24.0/data/icons/scalable/apps/Makefile.in 2008-09-22 22:46:13.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/data/icons/scalable/apps/Makefile.in 2008-11-20 18:37:28.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,11 +14,15 @@ + + @SET_MAKE@ + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = ../../../.. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -36,7 +40,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -56,6 +63,8 @@ + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -71,10 +80,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -86,17 +91,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -120,8 +131,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -151,6 +175,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -163,16 +188,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -213,13 +242,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -231,7 +257,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -250,6 +275,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -259,11 +285,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + themedir = $(datadir)/icons/hicolor + size = scalable + context = apps +@@ -317,9 +340,13 @@ + + clean-libtool: + -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + install-iconsDATA: $(icons_DATA) + @$(NORMAL_INSTALL) +- test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" ++ test -z "$(iconsdir)" || $(mkdir_p) "$(DESTDIR)$(iconsdir)" + @list='$(icons_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ +@@ -342,21 +369,22 @@ + + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -372,7 +400,7 @@ + all-am: Makefile $(DATA) + installdirs: + for dir in "$(DESTDIR)$(iconsdir)"; do \ +- test -z "$$dir" || $(MKDIR_P) "$$dir"; \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: install-am + install-exec: install-exec-am +@@ -404,7 +432,7 @@ + + distclean: distclean-am + -rm -f Makefile +-distclean-am: clean-am distclean-generic ++distclean-am: clean-am distclean-generic distclean-libtool + + dvi: dvi-am + +@@ -418,20 +446,12 @@ + + install-data-am: install-iconsDATA + +-install-dvi: install-dvi-am +- + install-exec-am: + +-install-html: install-html-am +- + install-info: install-info-am + + install-man: + +-install-pdf: install-pdf-am +- +-install-ps: install-ps-am +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -450,21 +470,17 @@ + + ps-am: + +-uninstall-am: uninstall-iconsDATA +- +-.MAKE: install-am install-strip ++uninstall-am: uninstall-iconsDATA uninstall-info-am + + .PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am html html-am info info-am install install-am \ +- install-data install-data-am install-dvi install-dvi-am \ +- install-exec install-exec-am install-html install-html-am \ ++ install-data install-data-am install-exec install-exec-am \ + install-iconsDATA install-info install-info-am install-man \ +- install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ +- uninstall uninstall-am uninstall-iconsDATA ++ uninstall uninstall-am uninstall-iconsDATA uninstall-info-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/data/icons/scalable/Makefile.in gnome-power-manager-2.24.0.new/data/icons/scalable/Makefile.in +--- gnome-power-manager-2.24.0/data/icons/scalable/Makefile.in 2008-09-22 22:46:12.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/data/icons/scalable/Makefile.in 2008-11-20 18:37:27.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -13,11 +13,15 @@ + # PARTICULAR PURPOSE. + + @SET_MAKE@ ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = ../../.. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -35,7 +39,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -45,19 +52,18 @@ + DIST_SOURCES = + RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ +- install-dvi-recursive install-exec-recursive \ +- install-html-recursive install-info-recursive \ +- install-pdf-recursive install-ps-recursive install-recursive \ +- installcheck-recursive installdirs-recursive pdf-recursive \ +- ps-recursive uninstall-recursive +-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ +- distclean-recursive maintainer-clean-recursive ++ install-exec-recursive install-info-recursive \ ++ install-recursive installcheck-recursive installdirs-recursive \ ++ pdf-recursive ps-recursive uninstall-info-recursive \ ++ uninstall-recursive + ETAGS = etags + CTAGS = ctags + DIST_SUBDIRS = $(SUBDIRS) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -73,10 +79,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -88,17 +90,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -122,8 +130,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -153,6 +174,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -165,16 +187,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -215,13 +241,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -233,7 +256,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -252,6 +274,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -261,11 +284,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + SUBDIRS = actions apps status + all: all-recursive + +@@ -306,6 +326,10 @@ + clean-libtool: + -rm -rf .libs _libs + ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: ++ + # This directory's subdirectories are mostly independent; you can cd + # into them and run `make' without going through this Makefile. + # To change the values of `make' variables: instead of editing Makefiles, +@@ -337,7 +361,8 @@ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +-$(RECURSIVE_CLEAN_TARGETS): ++mostlyclean-recursive clean-recursive distclean-recursive \ ++maintainer-clean-recursive: + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ +@@ -381,8 +406,8 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + mkid -fID $$unique + tags: TAGS + +@@ -407,8 +432,8 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +@@ -418,12 +443,13 @@ + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ ++ here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique +@@ -437,21 +463,22 @@ + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -465,7 +492,7 @@ + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ +- || $(MKDIR_P) "$(distdir)/$$subdir" \ ++ || $(mkdir_p) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ +@@ -473,8 +500,6 @@ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ +- am__remove_distdir=: \ +- am__skip_length_check=: \ + distdir) \ + || exit 1; \ + fi; \ +@@ -514,7 +539,8 @@ + + distclean: distclean-recursive + -rm -f Makefile +-distclean-am: clean-am distclean-generic distclean-tags ++distclean-am: clean-am distclean-generic distclean-libtool \ ++ distclean-tags + + dvi: dvi-recursive + +@@ -528,20 +554,12 @@ + + install-data-am: + +-install-dvi: install-dvi-recursive +- + install-exec-am: + +-install-html: install-html-recursive +- + install-info: install-info-recursive + + install-man: + +-install-pdf: install-pdf-recursive +- +-install-ps: install-ps-recursive +- + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -560,24 +578,22 @@ + + ps-am: + +-uninstall-am: ++uninstall-am: uninstall-info-am + +-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ +- install-strip ++uninstall-info: uninstall-info-recursive + +-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ +- all all-am check check-am clean clean-generic clean-libtool \ +- ctags ctags-recursive distclean distclean-generic \ +- distclean-libtool distclean-tags distdir dvi dvi-am html \ ++.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \ ++ clean clean-generic clean-libtool clean-recursive ctags \ ++ ctags-recursive distclean distclean-generic distclean-libtool \ ++ distclean-recursive distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ +- install-data-am install-dvi install-dvi-am install-exec \ +- install-exec-am install-html install-html-am install-info \ +- install-info-am install-man install-pdf install-pdf-am \ +- install-ps install-ps-am install-strip installcheck \ ++ install-data-am install-exec install-exec-am install-info \ ++ install-info-am install-man install-strip installcheck \ + installcheck-am installdirs installdirs-am maintainer-clean \ +- maintainer-clean-generic mostlyclean mostlyclean-generic \ +- mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ +- uninstall uninstall-am ++ maintainer-clean-generic maintainer-clean-recursive \ ++ mostlyclean mostlyclean-generic mostlyclean-libtool \ ++ mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \ ++ uninstall uninstall-am uninstall-info-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/data/icons/scalable/status/Makefile.in gnome-power-manager-2.24.0.new/data/icons/scalable/status/Makefile.in +--- gnome-power-manager-2.24.0/data/icons/scalable/status/Makefile.in 2008-09-22 22:46:13.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/data/icons/scalable/status/Makefile.in 2008-11-20 18:37:28.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,11 +14,15 @@ + + @SET_MAKE@ + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = ../../../.. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -36,7 +40,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -56,6 +63,8 @@ + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -71,10 +80,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -86,17 +91,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -120,8 +131,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -151,6 +175,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -163,16 +188,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -213,13 +242,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -231,7 +257,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -250,6 +275,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -259,11 +285,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + themedir = $(pkgdatadir)/icons/hicolor + size = scalable + context = status +@@ -362,9 +385,13 @@ + + clean-libtool: + -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + install-iconsDATA: $(icons_DATA) + @$(NORMAL_INSTALL) +- test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" ++ test -z "$(iconsdir)" || $(mkdir_p) "$(DESTDIR)$(iconsdir)" + @list='$(icons_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ +@@ -387,21 +414,22 @@ + + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -417,7 +445,7 @@ + all-am: Makefile $(DATA) + installdirs: + for dir in "$(DESTDIR)$(iconsdir)"; do \ +- test -z "$$dir" || $(MKDIR_P) "$$dir"; \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: install-am + install-exec: install-exec-am +@@ -449,7 +477,7 @@ + + distclean: distclean-am + -rm -f Makefile +-distclean-am: clean-am distclean-generic ++distclean-am: clean-am distclean-generic distclean-libtool + + dvi: dvi-am + +@@ -463,20 +491,12 @@ + + install-data-am: install-iconsDATA + +-install-dvi: install-dvi-am +- + install-exec-am: + +-install-html: install-html-am +- + install-info: install-info-am + + install-man: + +-install-pdf: install-pdf-am +- +-install-ps: install-ps-am +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -495,21 +515,17 @@ + + ps-am: + +-uninstall-am: uninstall-iconsDATA +- +-.MAKE: install-am install-strip ++uninstall-am: uninstall-iconsDATA uninstall-info-am + + .PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am html html-am info info-am install install-am \ +- install-data install-data-am install-dvi install-dvi-am \ +- install-exec install-exec-am install-html install-html-am \ ++ install-data install-data-am install-exec install-exec-am \ + install-iconsDATA install-info install-info-am install-man \ +- install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ +- uninstall uninstall-am uninstall-iconsDATA ++ uninstall uninstall-am uninstall-iconsDATA uninstall-info-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/data/Makefile.in gnome-power-manager-2.24.0.new/data/Makefile.in +--- gnome-power-manager-2.24.0/data/Makefile.in 2008-09-22 22:46:11.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/data/Makefile.in 2008-11-20 18:37:25.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,11 +14,15 @@ + + @SET_MAKE@ + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = .. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -39,7 +43,10 @@ + $(srcdir)/gnome-power-statistics.desktop.in.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -51,11 +58,10 @@ + DIST_SOURCES = + RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ +- install-dvi-recursive install-exec-recursive \ +- install-html-recursive install-info-recursive \ +- install-pdf-recursive install-ps-recursive install-recursive \ +- installcheck-recursive installdirs-recursive pdf-recursive \ +- ps-recursive uninstall-recursive ++ install-exec-recursive install-info-recursive \ ++ install-recursive installcheck-recursive installdirs-recursive \ ++ pdf-recursive ps-recursive uninstall-info-recursive \ ++ uninstall-recursive + am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; + am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ +@@ -72,14 +78,14 @@ + serviceDATA_INSTALL = $(INSTALL_DATA) + DATA = $(autostart_DATA) $(desktop_DATA) $(pkgdata_DATA) \ + $(schema_DATA) $(service_DATA) +-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ +- distclean-recursive maintainer-clean-recursive + ETAGS = etags + CTAGS = ctags + DIST_SUBDIRS = $(SUBDIRS) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -95,10 +101,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -110,17 +112,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -144,8 +152,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -175,6 +196,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -187,16 +209,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -237,13 +263,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -255,7 +278,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -274,6 +296,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -283,11 +306,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + SUBDIRS = icons sounds + schemadir = $(sysconfdir)/gconf/schemas + schema_in_files = gnome-power-manager.schemas.in +@@ -368,9 +388,13 @@ + + clean-libtool: + -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + install-autostartDATA: $(autostart_DATA) + @$(NORMAL_INSTALL) +- test -z "$(autostartdir)" || $(MKDIR_P) "$(DESTDIR)$(autostartdir)" ++ test -z "$(autostartdir)" || $(mkdir_p) "$(DESTDIR)$(autostartdir)" + @list='$(autostart_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ +@@ -387,7 +411,7 @@ + done + install-desktopDATA: $(desktop_DATA) + @$(NORMAL_INSTALL) +- test -z "$(desktopdir)" || $(MKDIR_P) "$(DESTDIR)$(desktopdir)" ++ test -z "$(desktopdir)" || $(mkdir_p) "$(DESTDIR)$(desktopdir)" + @list='$(desktop_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ +@@ -404,7 +428,7 @@ + done + install-pkgdataDATA: $(pkgdata_DATA) + @$(NORMAL_INSTALL) +- test -z "$(pkgdatadir)" || $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" ++ test -z "$(pkgdatadir)" || $(mkdir_p) "$(DESTDIR)$(pkgdatadir)" + @list='$(pkgdata_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ +@@ -421,7 +445,7 @@ + done + install-schemaDATA: $(schema_DATA) + @$(NORMAL_INSTALL) +- test -z "$(schemadir)" || $(MKDIR_P) "$(DESTDIR)$(schemadir)" ++ test -z "$(schemadir)" || $(mkdir_p) "$(DESTDIR)$(schemadir)" + @list='$(schema_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ +@@ -438,7 +462,7 @@ + done + install-serviceDATA: $(service_DATA) + @$(NORMAL_INSTALL) +- test -z "$(servicedir)" || $(MKDIR_P) "$(DESTDIR)$(servicedir)" ++ test -z "$(servicedir)" || $(mkdir_p) "$(DESTDIR)$(servicedir)" + @list='$(service_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ +@@ -485,7 +509,8 @@ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +-$(RECURSIVE_CLEAN_TARGETS): ++mostlyclean-recursive clean-recursive distclean-recursive \ ++maintainer-clean-recursive: + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ +@@ -529,8 +554,8 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + mkid -fID $$unique + tags: TAGS + +@@ -555,8 +580,8 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +@@ -566,12 +591,13 @@ + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ ++ here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique +@@ -585,21 +611,22 @@ + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -613,7 +640,7 @@ + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ +- || $(MKDIR_P) "$(distdir)/$$subdir" \ ++ || $(mkdir_p) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ +@@ -621,8 +648,6 @@ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ +- am__remove_distdir=: \ +- am__skip_length_check=: \ + distdir) \ + || exit 1; \ + fi; \ +@@ -633,7 +658,7 @@ + installdirs: installdirs-recursive + installdirs-am: + for dir in "$(DESTDIR)$(autostartdir)" "$(DESTDIR)$(desktopdir)" "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(schemadir)" "$(DESTDIR)$(servicedir)"; do \ +- test -z "$$dir" || $(MKDIR_P) "$$dir"; \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: install-recursive + install-exec: install-exec-recursive +@@ -668,7 +693,8 @@ + + distclean: distclean-recursive + -rm -f Makefile +-distclean-am: clean-am distclean-generic distclean-tags ++distclean-am: clean-am distclean-generic distclean-libtool \ ++ distclean-tags + + dvi: dvi-recursive + +@@ -684,20 +710,12 @@ + install-desktopDATA install-pkgdataDATA install-schemaDATA \ + install-serviceDATA + +-install-dvi: install-dvi-recursive +- + install-exec-am: + +-install-html: install-html-recursive +- + install-info: install-info-recursive + + install-man: + +-install-pdf: install-pdf-recursive +- +-install-ps: install-ps-recursive +- + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -717,30 +735,28 @@ + ps-am: + + uninstall-am: uninstall-autostartDATA uninstall-desktopDATA \ +- uninstall-local uninstall-pkgdataDATA uninstall-schemaDATA \ +- uninstall-serviceDATA ++ uninstall-info-am uninstall-local uninstall-pkgdataDATA \ ++ uninstall-schemaDATA uninstall-serviceDATA + +-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ +- install-strip ++uninstall-info: uninstall-info-recursive + +-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ +- all all-am check check-am clean clean-generic clean-libtool \ +- clean-local ctags ctags-recursive distclean distclean-generic \ +- distclean-libtool distclean-tags distdir dvi dvi-am html \ +- html-am info info-am install install-am install-autostartDATA \ +- install-data install-data-am install-data-local \ +- install-desktopDATA install-dvi install-dvi-am install-exec \ +- install-exec-am install-html install-html-am install-info \ +- install-info-am install-man install-pdf install-pdf-am \ +- install-pkgdataDATA install-ps install-ps-am \ +- install-schemaDATA install-serviceDATA install-strip \ +- installcheck installcheck-am installdirs installdirs-am \ +- maintainer-clean maintainer-clean-generic mostlyclean \ +- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ ++.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \ ++ clean clean-generic clean-libtool clean-local clean-recursive \ ++ ctags ctags-recursive distclean distclean-generic \ ++ distclean-libtool distclean-recursive distclean-tags distdir \ ++ dvi dvi-am html html-am info info-am install install-am \ ++ install-autostartDATA install-data install-data-am \ ++ install-data-local install-desktopDATA install-exec \ ++ install-exec-am install-info install-info-am install-man \ ++ install-pkgdataDATA install-schemaDATA install-serviceDATA \ ++ install-strip installcheck installcheck-am installdirs \ ++ installdirs-am maintainer-clean maintainer-clean-generic \ ++ maintainer-clean-recursive mostlyclean mostlyclean-generic \ ++ mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \ + tags tags-recursive uninstall uninstall-am \ +- uninstall-autostartDATA uninstall-desktopDATA uninstall-local \ +- uninstall-pkgdataDATA uninstall-schemaDATA \ +- uninstall-serviceDATA ++ uninstall-autostartDATA uninstall-desktopDATA \ ++ uninstall-info-am uninstall-local uninstall-pkgdataDATA \ ++ uninstall-schemaDATA uninstall-serviceDATA + + + @INTLTOOL_SCHEMAS_RULE@ +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/data/sounds/Makefile.in gnome-power-manager-2.24.0.new/data/sounds/Makefile.in +--- gnome-power-manager-2.24.0/data/sounds/Makefile.in 2008-09-22 22:46:13.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/data/sounds/Makefile.in 2008-11-20 18:37:28.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,11 +14,15 @@ + + @SET_MAKE@ + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = ../.. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -36,7 +40,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -56,6 +63,8 @@ + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -71,10 +80,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -86,17 +91,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -120,8 +131,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -151,6 +175,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -163,16 +188,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -213,13 +242,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -231,7 +257,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -250,6 +275,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -259,11 +285,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + EXTRA_DIST = \ + $(Data_DATA) + +@@ -311,9 +334,13 @@ + + clean-libtool: + -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + install-DataDATA: $(Data_DATA) + @$(NORMAL_INSTALL) +- test -z "$(Datadir)" || $(MKDIR_P) "$(DESTDIR)$(Datadir)" ++ test -z "$(Datadir)" || $(mkdir_p) "$(DESTDIR)$(Datadir)" + @list='$(Data_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ +@@ -336,21 +363,22 @@ + + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -366,7 +394,7 @@ + all-am: Makefile $(DATA) + installdirs: + for dir in "$(DESTDIR)$(Datadir)"; do \ +- test -z "$$dir" || $(MKDIR_P) "$$dir"; \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: install-am + install-exec: install-exec-am +@@ -398,7 +426,7 @@ + + distclean: distclean-am + -rm -f Makefile +-distclean-am: clean-am distclean-generic ++distclean-am: clean-am distclean-generic distclean-libtool + + dvi: dvi-am + +@@ -412,20 +440,12 @@ + + install-data-am: install-DataDATA + +-install-dvi: install-dvi-am +- + install-exec-am: + +-install-html: install-html-am +- + install-info: install-info-am + + install-man: + +-install-pdf: install-pdf-am +- +-install-ps: install-ps-am +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -444,21 +464,17 @@ + + ps-am: + +-uninstall-am: uninstall-DataDATA +- +-.MAKE: install-am install-strip ++uninstall-am: uninstall-DataDATA uninstall-info-am + + .PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am html html-am info info-am install install-DataDATA \ +- install-am install-data install-data-am install-dvi \ +- install-dvi-am install-exec install-exec-am install-html \ +- install-html-am install-info install-info-am install-man \ +- install-pdf install-pdf-am install-ps install-ps-am \ ++ install-am install-data install-data-am install-exec \ ++ install-exec-am install-info install-info-am install-man \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ +- uninstall uninstall-DataDATA uninstall-am ++ uninstall uninstall-DataDATA uninstall-am uninstall-info-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/docs/Makefile.in gnome-power-manager-2.24.0.new/docs/Makefile.in +--- gnome-power-manager-2.24.0/docs/Makefile.in 2008-09-22 22:46:13.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/docs/Makefile.in 2008-11-20 18:37:28.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,11 +14,15 @@ + + @SET_MAKE@ + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = .. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -36,7 +40,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -56,6 +63,8 @@ + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -71,10 +80,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -86,17 +91,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -120,8 +131,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -151,6 +175,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -163,16 +188,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -213,13 +242,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -231,7 +257,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -250,6 +275,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -259,11 +285,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + @DOCBOOK_DOCS_ENABLED_TRUE@htmldocdir = $(DOCDIR)/spec + @DOCBOOK_DOCS_ENABLED_TRUE@htmldoc_DATA = dbus-interface.html + EXTRA_DIST = \ +@@ -310,9 +333,13 @@ + + clean-libtool: + -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + install-htmldocDATA: $(htmldoc_DATA) + @$(NORMAL_INSTALL) +- test -z "$(htmldocdir)" || $(MKDIR_P) "$(DESTDIR)$(htmldocdir)" ++ test -z "$(htmldocdir)" || $(mkdir_p) "$(DESTDIR)$(htmldocdir)" + @list='$(htmldoc_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ +@@ -335,21 +362,22 @@ + + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -365,7 +393,7 @@ + all-am: Makefile $(DATA) + installdirs: + for dir in "$(DESTDIR)$(htmldocdir)"; do \ +- test -z "$$dir" || $(MKDIR_P) "$$dir"; \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: install-am + install-exec: install-exec-am +@@ -397,7 +425,7 @@ + + distclean: distclean-am + -rm -f Makefile +-distclean-am: clean-am distclean-generic ++distclean-am: clean-am distclean-generic distclean-libtool + + dvi: dvi-am + +@@ -411,20 +439,12 @@ + + install-data-am: install-htmldocDATA + +-install-dvi: install-dvi-am +- + install-exec-am: + +-install-html: install-html-am +- + install-info: install-info-am + + install-man: + +-install-pdf: install-pdf-am +- +-install-ps: install-ps-am +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -443,22 +463,18 @@ + + ps-am: + +-uninstall-am: uninstall-htmldocDATA +- +-.MAKE: install-am install-strip ++uninstall-am: uninstall-htmldocDATA uninstall-info-am + + .PHONY: all all-am check check-am clean clean-generic clean-libtool \ + clean-local distclean distclean-generic distclean-libtool \ + distdir dvi dvi-am html html-am info info-am install \ +- install-am install-data install-data-am install-dvi \ +- install-dvi-am install-exec install-exec-am install-html \ +- install-html-am install-htmldocDATA install-info \ +- install-info-am install-man install-pdf install-pdf-am \ +- install-ps install-ps-am install-strip installcheck \ ++ install-am install-data install-data-am install-exec \ ++ install-exec-am install-htmldocDATA install-info \ ++ install-info-am install-man install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \ +- uninstall-htmldocDATA ++ uninstall-htmldocDATA uninstall-info-am + + + @DOCBOOK_DOCS_ENABLED_TRUE@dbus-interface.html : dbus-interface.xml +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/help/Makefile.in gnome-power-manager-2.24.0.new/help/Makefile.in +--- gnome-power-manager-2.24.0/help/Makefile.in 2008-09-22 22:46:13.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/help/Makefile.in 2008-11-20 18:37:28.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -37,11 +37,15 @@ + # the same distribution terms that you use for the rest of that program. + + ################################################################################ ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = .. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -60,7 +64,10 @@ + subdir = help + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -71,6 +78,8 @@ + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -86,10 +95,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -101,17 +106,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -135,8 +146,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -166,6 +190,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -178,16 +203,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -228,13 +257,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -246,7 +272,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -265,6 +290,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -274,11 +300,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + _clean_doc_header = $(if $(DOC_H_FILE),clean-doc-header) + _DOC_REAL_FORMATS = $(if $(DOC_USER_FORMATS),$(DOC_USER_FORMATS),$(DOC_FORMATS)) + _DOC_REAL_LINGUAS = $(if $(filter environment,$(origin LINGUAS)), \ +@@ -437,6 +460,10 @@ + + clean-libtool: + -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + tags: TAGS + TAGS: + +@@ -445,21 +472,23 @@ + + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ $(mkdir_p) $(distdir)/.. ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -507,7 +536,8 @@ + + distclean: distclean-am + -rm -f Makefile +-distclean-am: clean-am distclean-generic distclean-local ++distclean-am: clean-am distclean-generic distclean-libtool \ ++ distclean-local + + dvi: dvi-am + +@@ -521,20 +551,12 @@ + + install-data-am: install-data-local + +-install-dvi: install-dvi-am +- + install-exec-am: + +-install-html: install-html-am +- + install-info: install-info-am + + install-man: + +-install-pdf: install-pdf-am +- +-install-ps: install-ps-am +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -555,22 +577,19 @@ + + ps-am: + +-uninstall-am: uninstall-local +- +-.MAKE: install-am install-strip ++uninstall-am: uninstall-info-am uninstall-local + + .PHONY: all all-am check check-am clean clean-generic clean-libtool \ + clean-local dist-hook distclean distclean-generic \ + distclean-libtool distclean-local distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ +- install-data-am install-data-local install-dvi install-dvi-am \ +- install-exec install-exec-am install-html install-html-am \ +- install-info install-info-am install-man install-pdf \ +- install-pdf-am install-ps install-ps-am install-strip \ +- installcheck installcheck-am installdirs maintainer-clean \ +- maintainer-clean-generic maintainer-clean-local mostlyclean \ +- mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \ +- pdf-am ps ps-am uninstall uninstall-am uninstall-local ++ install-data-am install-data-local install-exec \ ++ install-exec-am install-info install-info-am install-man \ ++ install-strip installcheck installcheck-am installdirs \ ++ maintainer-clean maintainer-clean-generic \ ++ maintainer-clean-local mostlyclean mostlyclean-generic \ ++ mostlyclean-libtool mostlyclean-local pdf pdf-am ps ps-am \ ++ uninstall uninstall-am uninstall-info-am uninstall-local + + + DOC_H_FILE ?= +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/libdbus-glib/Makefile.in gnome-power-manager-2.24.0.new/libdbus-glib/Makefile.in +--- gnome-power-manager-2.24.0/libdbus-glib/Makefile.in 2008-09-22 22:46:13.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/libdbus-glib/Makefile.in 2008-11-20 18:37:28.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,11 +14,15 @@ + + @SET_MAKE@ + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = .. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -36,7 +40,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -68,18 +75,17 @@ + libdbus-monitor-session.lo libdbus-monitor-system.lo \ + libdbus-watch.lo + libdbus_watch_la_OBJECTS = $(am_libdbus_watch_la_OBJECTS) +-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) ++DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +- --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ +- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) ++LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \ ++ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ ++ $(AM_CFLAGS) $(CFLAGS) + CCLD = $(CC) +-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +- --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ +- $(LDFLAGS) -o $@ ++LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ ++ $(AM_LDFLAGS) $(LDFLAGS) -o $@ + SOURCES = $(libdbus_monitor_session_la_SOURCES) \ + $(libdbus_monitor_system_la_SOURCES) \ + $(libdbus_proxy_la_SOURCES) $(libdbus_watch_la_SOURCES) +@@ -91,6 +97,8 @@ + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -106,10 +114,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -121,17 +125,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -155,8 +165,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -186,6 +209,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -198,16 +222,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -248,13 +276,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -266,7 +291,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -285,6 +309,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -294,11 +319,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + INCLUDES = \ + $(GLIB_CFLAGS) \ + $(DBUS_CFLAGS) \ +@@ -400,13 +422,13 @@ + rm -f "$${dir}/so_locations"; \ + done + libdbus-monitor-session.la: $(libdbus_monitor_session_la_OBJECTS) $(libdbus_monitor_session_la_DEPENDENCIES) +- $(LINK) $(libdbus_monitor_session_la_OBJECTS) $(libdbus_monitor_session_la_LIBADD) $(LIBS) ++ $(LINK) $(libdbus_monitor_session_la_LDFLAGS) $(libdbus_monitor_session_la_OBJECTS) $(libdbus_monitor_session_la_LIBADD) $(LIBS) + libdbus-monitor-system.la: $(libdbus_monitor_system_la_OBJECTS) $(libdbus_monitor_system_la_DEPENDENCIES) +- $(LINK) $(libdbus_monitor_system_la_OBJECTS) $(libdbus_monitor_system_la_LIBADD) $(LIBS) ++ $(LINK) $(libdbus_monitor_system_la_LDFLAGS) $(libdbus_monitor_system_la_OBJECTS) $(libdbus_monitor_system_la_LIBADD) $(LIBS) + libdbus-proxy.la: $(libdbus_proxy_la_OBJECTS) $(libdbus_proxy_la_DEPENDENCIES) +- $(LINK) $(libdbus_proxy_la_OBJECTS) $(libdbus_proxy_la_LIBADD) $(LIBS) ++ $(LINK) $(libdbus_proxy_la_LDFLAGS) $(libdbus_proxy_la_OBJECTS) $(libdbus_proxy_la_LIBADD) $(LIBS) + libdbus-watch.la: $(libdbus_watch_la_OBJECTS) $(libdbus_watch_la_DEPENDENCIES) +- $(LINK) $(libdbus_watch_la_OBJECTS) $(libdbus_watch_la_LIBADD) $(LIBS) ++ $(LINK) $(libdbus_watch_la_LDFLAGS) $(libdbus_watch_la_OBJECTS) $(libdbus_watch_la_LIBADD) $(LIBS) + + mostlyclean-compile: + -rm -f *.$(OBJEXT) +@@ -421,22 +443,22 @@ + @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdbus-watch.Plo@am__quote@ + + .c.o: +-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c $< + + .c.obj: +-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: +-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo ++@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< +@@ -447,13 +469,17 @@ + clean-libtool: + -rm -rf .libs _libs + ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: ++ + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + mkid -fID $$unique + tags: TAGS + +@@ -465,8 +491,8 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +@@ -476,12 +502,13 @@ + CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ ++ here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique +@@ -495,21 +522,22 @@ + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -561,7 +589,7 @@ + -rm -rf ./$(DEPDIR) + -rm -f Makefile + distclean-am: clean-am distclean-compile distclean-generic \ +- distclean-tags ++ distclean-libtool distclean-tags + + dvi: dvi-am + +@@ -575,20 +603,12 @@ + + install-data-am: + +-install-dvi: install-dvi-am +- + install-exec-am: + +-install-html: install-html-am +- + install-info: install-info-am + + install-man: + +-install-pdf: install-pdf-am +- +-install-ps: install-ps-am +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -609,23 +629,19 @@ + + ps-am: + +-uninstall-am: +- +-.MAKE: install-am install-strip ++uninstall-am: uninstall-info-am + + .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ + clean-libtool clean-local clean-noinstLTLIBRARIES ctags \ + distclean distclean-compile distclean-generic \ + distclean-libtool distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ +- install-data-am install-dvi install-dvi-am install-exec \ +- install-exec-am install-html install-html-am install-info \ +- install-info-am install-man install-pdf install-pdf-am \ +- install-ps install-ps-am install-strip installcheck \ ++ install-data-am install-exec install-exec-am install-info \ ++ install-info-am install-man install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ +- tags uninstall uninstall-am ++ tags uninstall uninstall-am uninstall-info-am + + + libdbus-marshal.c: libdbus-marshal.list +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/libhal-glib/Makefile.in gnome-power-manager-2.24.0.new/libhal-glib/Makefile.in +--- gnome-power-manager-2.24.0/libhal-glib/Makefile.in 2008-09-22 22:46:13.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/libhal-glib/Makefile.in 2008-11-20 18:37:29.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,11 +14,15 @@ + + @SET_MAKE@ + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = .. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -36,48 +40,54 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = + LTLIBRARIES = $(noinst_LTLIBRARIES) +-am__DEPENDENCIES_1 = +-libhal_gdevice_la_DEPENDENCIES = $(LOCAL_LIBDBUS_LIBS) \ +- $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ +- $(am__DEPENDENCIES_1) ++am__DEPENDENCIES_1 = \ ++ $(top_builddir)/libdbus-glib/libdbus-monitor-session.la \ ++ $(top_builddir)/libdbus-glib/libdbus-monitor-system.la \ ++ $(top_builddir)/libdbus-glib/libdbus-proxy.la ++am__DEPENDENCIES_2 = ++libhal_gdevice_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \ ++ $(am__DEPENDENCIES_2) $(am__DEPENDENCIES_2) \ ++ $(am__DEPENDENCIES_2) + am_libhal_gdevice_la_OBJECTS = libhal-marshal.lo libhal-gdevice.lo + libhal_gdevice_la_OBJECTS = $(am_libhal_gdevice_la_OBJECTS) +-libhal_gdevicestore_la_DEPENDENCIES = $(LOCAL_LIBDBUS_LIBS) \ +- $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ +- $(am__DEPENDENCIES_1) ++libhal_gdevicestore_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \ ++ $(am__DEPENDENCIES_2) $(am__DEPENDENCIES_2) \ ++ $(am__DEPENDENCIES_2) + am_libhal_gdevicestore_la_OBJECTS = libhal-marshal.lo \ + libhal-gdevice.lo libhal-gdevicestore.lo + libhal_gdevicestore_la_OBJECTS = $(am_libhal_gdevicestore_la_OBJECTS) +-libhal_gmanager_la_DEPENDENCIES = $(LOCAL_LIBDBUS_LIBS) \ +- $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ +- $(am__DEPENDENCIES_1) ++libhal_gmanager_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \ ++ $(am__DEPENDENCIES_2) $(am__DEPENDENCIES_2) \ ++ $(am__DEPENDENCIES_2) + am_libhal_gmanager_la_OBJECTS = libhal-marshal.lo libhal-gdevice.lo \ + libhal-gmanager.lo + libhal_gmanager_la_OBJECTS = $(am_libhal_gmanager_la_OBJECTS) +-libhal_gpower_la_DEPENDENCIES = $(LOCAL_LIBDBUS_LIBS) \ +- $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ +- $(am__DEPENDENCIES_1) ++libhal_gpower_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \ ++ $(am__DEPENDENCIES_2) $(am__DEPENDENCIES_2) \ ++ $(am__DEPENDENCIES_2) + am_libhal_gpower_la_OBJECTS = libhal-marshal.lo libhal-gpower.lo + libhal_gpower_la_OBJECTS = $(am_libhal_gpower_la_OBJECTS) +-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) ++DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +- --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ +- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) ++LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \ ++ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ ++ $(AM_CFLAGS) $(CFLAGS) + CCLD = $(CC) +-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +- --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ +- $(LDFLAGS) -o $@ ++LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ ++ $(AM_LDFLAGS) $(LDFLAGS) -o $@ + SOURCES = $(libhal_gdevice_la_SOURCES) \ + $(libhal_gdevicestore_la_SOURCES) \ + $(libhal_gmanager_la_SOURCES) $(libhal_gpower_la_SOURCES) +@@ -89,6 +99,8 @@ + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -104,10 +116,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -119,17 +127,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -153,8 +167,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -184,6 +211,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -196,16 +224,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -246,13 +278,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -264,7 +293,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -283,6 +311,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -292,11 +321,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + INCLUDES = \ + $(GLIB_CFLAGS) \ + $(DBUS_CFLAGS) \ +@@ -419,13 +445,13 @@ + rm -f "$${dir}/so_locations"; \ + done + libhal-gdevice.la: $(libhal_gdevice_la_OBJECTS) $(libhal_gdevice_la_DEPENDENCIES) +- $(LINK) $(libhal_gdevice_la_OBJECTS) $(libhal_gdevice_la_LIBADD) $(LIBS) ++ $(LINK) $(libhal_gdevice_la_LDFLAGS) $(libhal_gdevice_la_OBJECTS) $(libhal_gdevice_la_LIBADD) $(LIBS) + libhal-gdevicestore.la: $(libhal_gdevicestore_la_OBJECTS) $(libhal_gdevicestore_la_DEPENDENCIES) +- $(LINK) $(libhal_gdevicestore_la_OBJECTS) $(libhal_gdevicestore_la_LIBADD) $(LIBS) ++ $(LINK) $(libhal_gdevicestore_la_LDFLAGS) $(libhal_gdevicestore_la_OBJECTS) $(libhal_gdevicestore_la_LIBADD) $(LIBS) + libhal-gmanager.la: $(libhal_gmanager_la_OBJECTS) $(libhal_gmanager_la_DEPENDENCIES) +- $(LINK) $(libhal_gmanager_la_OBJECTS) $(libhal_gmanager_la_LIBADD) $(LIBS) ++ $(LINK) $(libhal_gmanager_la_LDFLAGS) $(libhal_gmanager_la_OBJECTS) $(libhal_gmanager_la_LIBADD) $(LIBS) + libhal-gpower.la: $(libhal_gpower_la_OBJECTS) $(libhal_gpower_la_DEPENDENCIES) +- $(LINK) $(libhal_gpower_la_OBJECTS) $(libhal_gpower_la_LIBADD) $(LIBS) ++ $(LINK) $(libhal_gpower_la_LDFLAGS) $(libhal_gpower_la_OBJECTS) $(libhal_gpower_la_LIBADD) $(LIBS) + + mostlyclean-compile: + -rm -f *.$(OBJEXT) +@@ -440,22 +466,22 @@ + @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhal-marshal.Plo@am__quote@ + + .c.o: +-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c $< + + .c.obj: +-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: +-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo ++@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< +@@ -466,13 +492,17 @@ + clean-libtool: + -rm -rf .libs _libs + ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: ++ + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + mkid -fID $$unique + tags: TAGS + +@@ -484,8 +514,8 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +@@ -495,12 +525,13 @@ + CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ ++ here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique +@@ -514,21 +545,22 @@ + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -580,7 +612,7 @@ + -rm -rf ./$(DEPDIR) + -rm -f Makefile + distclean-am: clean-am distclean-compile distclean-generic \ +- distclean-tags ++ distclean-libtool distclean-tags + + dvi: dvi-am + +@@ -594,20 +626,12 @@ + + install-data-am: + +-install-dvi: install-dvi-am +- + install-exec-am: + +-install-html: install-html-am +- + install-info: install-info-am + + install-man: + +-install-pdf: install-pdf-am +- +-install-ps: install-ps-am +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -628,23 +652,19 @@ + + ps-am: + +-uninstall-am: +- +-.MAKE: install-am install-strip ++uninstall-am: uninstall-info-am + + .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ + clean-libtool clean-local clean-noinstLTLIBRARIES ctags \ + distclean distclean-compile distclean-generic \ + distclean-libtool distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ +- install-data-am install-dvi install-dvi-am install-exec \ +- install-exec-am install-html install-html-am install-info \ +- install-info-am install-man install-pdf install-pdf-am \ +- install-ps install-ps-am install-strip installcheck \ ++ install-data-am install-exec install-exec-am install-info \ ++ install-info-am install-man install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ +- tags uninstall uninstall-am ++ tags uninstall uninstall-am uninstall-info-am + + + libhal-marshal.c: libhal-marshal.list +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/libidletime/Makefile.in gnome-power-manager-2.24.0.new/libidletime/Makefile.in +--- gnome-power-manager-2.24.0/libidletime/Makefile.in 2008-09-22 22:46:14.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/libidletime/Makefile.in 2008-11-20 18:37:29.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,11 +14,15 @@ + + @SET_MAKE@ + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = .. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -36,7 +40,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -48,18 +55,17 @@ + $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) + am_libidletime_la_OBJECTS = libidletime.lo + libidletime_la_OBJECTS = $(am_libidletime_la_OBJECTS) +-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) ++DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +- --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ +- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) ++LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \ ++ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ ++ $(AM_CFLAGS) $(CFLAGS) + CCLD = $(CC) +-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +- --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ +- $(LDFLAGS) -o $@ ++LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ ++ $(AM_LDFLAGS) $(LDFLAGS) -o $@ + SOURCES = $(libidletime_la_SOURCES) + DIST_SOURCES = $(libidletime_la_SOURCES) + ETAGS = etags +@@ -67,6 +73,8 @@ + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -82,10 +90,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -97,17 +101,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -131,8 +141,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -162,6 +185,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -174,16 +198,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -224,13 +252,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -242,7 +267,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -261,6 +285,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -270,11 +295,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + INCLUDES = \ + $(GLIB_CFLAGS) \ + $(GDK_CFLAGS) \ +@@ -336,7 +358,7 @@ + rm -f "$${dir}/so_locations"; \ + done + libidletime.la: $(libidletime_la_OBJECTS) $(libidletime_la_DEPENDENCIES) +- $(LINK) $(libidletime_la_OBJECTS) $(libidletime_la_LIBADD) $(LIBS) ++ $(LINK) $(libidletime_la_LDFLAGS) $(libidletime_la_OBJECTS) $(libidletime_la_LIBADD) $(LIBS) + + mostlyclean-compile: + -rm -f *.$(OBJEXT) +@@ -347,22 +369,22 @@ + @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libidletime.Plo@am__quote@ + + .c.o: +-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c $< + + .c.obj: +-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: +-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo ++@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< +@@ -373,13 +395,17 @@ + clean-libtool: + -rm -rf .libs _libs + ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: ++ + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + mkid -fID $$unique + tags: TAGS + +@@ -391,8 +417,8 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +@@ -402,12 +428,13 @@ + CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ ++ here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique +@@ -421,21 +448,22 @@ + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -484,7 +512,7 @@ + -rm -rf ./$(DEPDIR) + -rm -f Makefile + distclean-am: clean-am distclean-compile distclean-generic \ +- distclean-tags ++ distclean-libtool distclean-tags + + dvi: dvi-am + +@@ -498,20 +526,12 @@ + + install-data-am: + +-install-dvi: install-dvi-am +- + install-exec-am: + +-install-html: install-html-am +- + install-info: install-info-am + + install-man: + +-install-pdf: install-pdf-am +- +-install-ps: install-ps-am +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -532,23 +552,19 @@ + + ps-am: + +-uninstall-am: +- +-.MAKE: install-am install-strip ++uninstall-am: uninstall-info-am + + .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ + clean-libtool clean-local clean-noinstLTLIBRARIES ctags \ + distclean distclean-compile distclean-generic \ + distclean-libtool distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ +- install-data-am install-dvi install-dvi-am install-exec \ +- install-exec-am install-html install-html-am install-info \ +- install-info-am install-man install-pdf install-pdf-am \ +- install-ps install-ps-am install-strip installcheck \ ++ install-data-am install-exec install-exec-am install-info \ ++ install-info-am install-man install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ +- tags uninstall uninstall-am ++ tags uninstall uninstall-am uninstall-info-am + + + clean-local: +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/libunique/Makefile.in gnome-power-manager-2.24.0.new/libunique/Makefile.in +--- gnome-power-manager-2.24.0/libunique/Makefile.in 2008-09-22 22:46:14.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/libunique/Makefile.in 2008-11-20 18:37:29.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,11 +14,15 @@ + + @SET_MAKE@ + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = .. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -39,7 +43,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -53,18 +60,17 @@ + $(am__DEPENDENCIES_2) + am_libunique_la_OBJECTS = libunique.lo + libunique_la_OBJECTS = $(am_libunique_la_OBJECTS) +-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) ++DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +- --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ +- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) ++LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \ ++ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ ++ $(AM_CFLAGS) $(CFLAGS) + CCLD = $(CC) +-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +- --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ +- $(LDFLAGS) -o $@ ++LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ ++ $(AM_LDFLAGS) $(LDFLAGS) -o $@ + SOURCES = $(libunique_la_SOURCES) + DIST_SOURCES = $(libunique_la_SOURCES) + ETAGS = etags +@@ -72,6 +78,8 @@ + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -87,10 +95,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -102,17 +106,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -136,8 +146,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -167,6 +190,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -179,16 +203,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -229,13 +257,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -247,7 +272,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -266,6 +290,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -275,11 +300,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + INCLUDES = \ + $(GLIB_CFLAGS) \ + $(UNIQUE_CFLAGS) \ +@@ -338,7 +360,7 @@ + rm -f "$${dir}/so_locations"; \ + done + libunique.la: $(libunique_la_OBJECTS) $(libunique_la_DEPENDENCIES) +- $(LINK) $(libunique_la_OBJECTS) $(libunique_la_LIBADD) $(LIBS) ++ $(LINK) $(libunique_la_LDFLAGS) $(libunique_la_OBJECTS) $(libunique_la_LIBADD) $(LIBS) + + mostlyclean-compile: + -rm -f *.$(OBJEXT) +@@ -349,22 +371,22 @@ + @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libunique.Plo@am__quote@ + + .c.o: +-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c $< + + .c.obj: +-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: +-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo ++@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< +@@ -375,13 +397,17 @@ + clean-libtool: + -rm -rf .libs _libs + ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: ++ + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + mkid -fID $$unique + tags: TAGS + +@@ -393,8 +419,8 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +@@ -404,12 +430,13 @@ + CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ ++ here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique +@@ -423,21 +450,22 @@ + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -485,7 +513,7 @@ + -rm -rf ./$(DEPDIR) + -rm -f Makefile + distclean-am: clean-am distclean-compile distclean-generic \ +- distclean-tags ++ distclean-libtool distclean-tags + + dvi: dvi-am + +@@ -499,20 +527,12 @@ + + install-data-am: + +-install-dvi: install-dvi-am +- + install-exec-am: + +-install-html: install-html-am +- + install-info: install-info-am + + install-man: + +-install-pdf: install-pdf-am +- +-install-ps: install-ps-am +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -533,23 +553,19 @@ + + ps-am: + +-uninstall-am: +- +-.MAKE: install-am install-strip ++uninstall-am: uninstall-info-am + + .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ + clean-libtool clean-local clean-noinstLTLIBRARIES ctags \ + distclean distclean-compile distclean-generic \ + distclean-libtool distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ +- install-data-am install-dvi install-dvi-am install-exec \ +- install-exec-am install-html install-html-am install-info \ +- install-info-am install-man install-pdf install-pdf-am \ +- install-ps install-ps-am install-strip installcheck \ ++ install-data-am install-exec install-exec-am install-info \ ++ install-info-am install-man install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ +- tags uninstall uninstall-am ++ tags uninstall uninstall-am uninstall-info-am + + + clean-local: +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/ltmain.sh gnome-power-manager-2.24.0.new/ltmain.sh +--- gnome-power-manager-2.24.0/ltmain.sh 2008-01-30 21:26:55.000000000 +0100 ++++ gnome-power-manager-2.24.0.new/ltmain.sh 2008-11-20 18:37:14.000000000 +0100 +@@ -1,52 +1,83 @@ +-# ltmain.sh - Provide generalized library-building support services. +-# NOTE: Changing this file will not affect anything until you rerun configure. +-# +-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, +-# 2007 Free Software Foundation, Inc. +-# Originally by Gordon Matzigkeit , 1996 +-# +-# This program is free software; you can redistribute it and/or modify ++# Generated from ltmain.m4sh. ++ ++# ltmain.sh (GNU libtool) 2.2.4 ++# Written by Gordon Matzigkeit , 1996 ++ ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc. ++# This is free software; see the source for copying conditions. There is NO ++# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ++ ++# GNU Libtool is free software; you can redistribute it and/or modify + # it under the terms of the GNU General Public License as published by + # the Free Software Foundation; either version 2 of the License, or + # (at your option) any later version. + # +-# This program is distributed in the hope that it will be useful, but ++# As a special exception to the GNU General Public License, ++# if you distribute this file as part of a program or library that ++# is built using GNU Libtool, you may include this file under the ++# same distribution terms that you use for the rest of that program. ++# ++# GNU Libtool is distributed in the hope that it will be useful, but + # WITHOUT ANY WARRANTY; without even the implied warranty of + # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + # General Public License for more details. + # + # You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +-# +-# As a special exception to the GNU General Public License, if you +-# distribute this file as part of a program that contains a +-# configuration script generated by Autoconf, you may include it under +-# the same distribution terms that you use for the rest of that program. +- +-basename="s,^.*/,,g" +- +-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +-# is ksh but when the shell is invoked as "sh" and the current value of +-# the _XPG environment variable is not equal to 1 (one), the special +-# positional parameter $0, within a function call, is the name of the +-# function. +-progpath="$0" +- +-# The name of this program: +-progname=`echo "$progpath" | $SED $basename` +-modename="$progname" ++# along with GNU Libtool; see the file COPYING. If not, a copy ++# can be downloaded from http://www.gnu.org/licenses/gpl.html, ++# or obtained by writing to the Free Software Foundation, Inc., ++# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + +-# Global variables: +-EXIT_SUCCESS=0 +-EXIT_FAILURE=1 ++# Usage: $progname [OPTION]... [MODE-ARG]... ++# ++# Provide generalized library-building support services. ++# ++# --config show all configuration variables ++# --debug enable verbose shell tracing ++# -n, --dry-run display commands without modifying any files ++# --features display basic configuration information and exit ++# --mode=MODE use operation mode MODE ++# --preserve-dup-deps don't remove duplicate dependency libraries ++# --quiet, --silent don't print informational messages ++# --tag=TAG use configuration variables from tag TAG ++# -v, --verbose print informational messages (default) ++# --version print version information ++# -h, --help print short or long help message ++# ++# MODE must be one of the following: ++# ++# clean remove files from the build directory ++# compile compile a source file into a libtool object ++# execute automatically set library path, then run a program ++# finish complete the installation of libtool libraries ++# install install libraries or executables ++# link create a library or an executable ++# uninstall remove libraries from an installed directory ++# ++# MODE-ARGS vary depending on the MODE. ++# Try `$progname --help --mode=MODE' for a more detailed description of MODE. ++# ++# When reporting a bug, please describe a test case to reproduce it and ++# include the following information: ++# ++# host-triplet: $host ++# shell: $SHELL ++# compiler: $LTCC ++# compiler flags: $LTCFLAGS ++# linker: $LD (gnu? $with_gnu_ld) ++# $progname: (GNU libtool) 2.2.4 Debian-2.2.4-0ubuntu4 ++# automake: $automake_version ++# autoconf: $autoconf_version ++# ++# Report bugs to . + + PROGRAM=ltmain.sh + PACKAGE=libtool +-VERSION=1.5.24 +-TIMESTAMP=" (1.1220.2.456 2007/06/24 02:25:32)" ++VERSION="2.2.4 Debian-2.2.4-0ubuntu4" ++TIMESTAMP="" ++package_revision=1.2976 + +-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE). ++# Be Bourne compatible + if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: +@@ -60,98 +91,261 @@ + BIN_SH=xpg4; export BIN_SH # for Tru64 + DUALCASE=1; export DUALCASE # for MKS sh + +-# Check that we have a working $echo. +-if test "X$1" = X--no-reexec; then +- # Discard the --no-reexec flag, and continue. +- shift +-elif test "X$1" = X--fallback-echo; then +- # Avoid inline document here, it may be left over +- : +-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then +- # Yippee, $echo works! +- : +-else +- # Restart under the correct shell, and then maybe $echo will work. +- exec $SHELL "$progpath" --no-reexec ${1+"$@"} +-fi +- +-if test "X$1" = X--fallback-echo; then +- # used as fallback echo +- shift +- cat <&2 +- $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 +- exit $EXIT_FAILURE +-fi ++dirname="s,/[^/]*$,," ++basename="s,^.*/,," + +-# Global variables. +-mode=$default_mode +-nonopt= +-prev= +-prevopt= +-run= +-show="$echo" +-show_help= +-execute_dlfiles= +-duplicate_deps=no +-preserve_args= +-lo2o="s/\\.lo\$/.${objext}/" +-o2lo="s/\\.${objext}\$/.lo/" +-extracted_archives= +-extracted_serial=0 ++# func_dirname_and_basename file append nondir_replacement ++# perform func_basename and func_dirname in a single function ++# call: ++# dirname: Compute the dirname of FILE. If nonempty, ++# add APPEND to the result, otherwise set result ++# to NONDIR_REPLACEMENT. ++# value returned in "$func_dirname_result" ++# basename: Compute filename of FILE. ++# value retuned in "$func_basename_result" ++# Implementation must be kept synchronized with func_dirname ++# and func_basename. For efficiency, we do not delegate to ++# those functions but instead duplicate the functionality here. ++func_dirname_and_basename () ++{ ++ # Extract subdirectory from the argument. ++ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` ++ if test "X$func_dirname_result" = "X${1}"; then ++ func_dirname_result="${3}" ++ else ++ func_dirname_result="$func_dirname_result${2}" ++ fi ++ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` ++} ++ ++# Generated shell functions inserted here. ++ ++# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh ++# is ksh but when the shell is invoked as "sh" and the current value of ++# the _XPG environment variable is not equal to 1 (one), the special ++# positional parameter $0, within a function call, is the name of the ++# function. ++progpath="$0" ++ ++# The name of this program: ++# In the unlikely event $progname began with a '-', it would play havoc with ++# func_echo (imagine progname=-n), so we prepend ./ in that case: ++func_dirname_and_basename "$progpath" ++progname=$func_basename_result ++case $progname in ++ -*) progname=./$progname ;; ++esac ++ ++# Make sure we have an absolute path for reexecution: ++case $progpath in ++ [\\/]*|[A-Za-z]:\\*) ;; ++ *[\\/]*) ++ progdir=$func_dirname_result ++ progdir=`cd "$progdir" && pwd` ++ progpath="$progdir/$progname" ++ ;; ++ *) ++ save_IFS="$IFS" ++ IFS=: ++ for progdir in $PATH; do ++ IFS="$save_IFS" ++ test -x "$progdir/$progname" && break ++ done ++ IFS="$save_IFS" ++ test -n "$progdir" || progdir=`pwd` ++ progpath="$progdir/$progname" ++ ;; ++esac ++ ++# Sed substitution that helps us do robust quoting. It backslashifies ++# metacharacters that are still active within double-quoted strings. ++Xsed="${SED}"' -e 1s/^X//' ++sed_quote_subst='s/\([`"$\\]\)/\\\1/g' ++ ++# Same as above, but do not quote variable references. ++double_quote_subst='s/\(["`\\]\)/\\\1/g' ++ ++# Re-`\' parameter expansions in output of double_quote_subst that were ++# `\'-ed in input to the same. If an odd number of `\' preceded a '$' ++# in input to double_quote_subst, that '$' was protected from expansion. ++# Since each input `\' is now two `\'s, look for any number of runs of ++# four `\'s followed by two `\'s and then a '$'. `\' that '$'. ++bs='\\' ++bs2='\\\\' ++bs4='\\\\\\\\' ++dollar='\$' ++sed_double_backslash="\ ++ s/$bs4/&\\ ++/g ++ s/^$bs2$dollar/$bs&/ ++ s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g ++ s/\n//g" ++ ++# Standard options: ++opt_dry_run=false ++opt_help=false ++opt_quiet=false ++opt_verbose=false ++opt_warning=: ++ ++# func_echo arg... ++# Echo program name prefixed message, along with the current mode ++# name if it has been set yet. ++func_echo () ++{ ++ $ECHO "$progname${mode+: }$mode: $*" ++} ++ ++# func_verbose arg... ++# Echo program name prefixed message in verbose mode only. ++func_verbose () ++{ ++ $opt_verbose && func_echo ${1+"$@"} ++ ++ # A bug in bash halts the script if the last line of a function ++ # fails when set -e is in force, so we need another command to ++ # work around that: ++ : ++} ++ ++# func_error arg... ++# Echo program name prefixed message to standard error. ++func_error () ++{ ++ $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2 ++} ++ ++# func_warning arg... ++# Echo program name prefixed warning message to standard error. ++func_warning () ++{ ++ $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2 ++ ++ # bash bug again: ++ : ++} ++ ++# func_fatal_error arg... ++# Echo program name prefixed message to standard error, and exit. ++func_fatal_error () ++{ ++ func_error ${1+"$@"} ++ exit $EXIT_FAILURE ++} ++ ++# func_fatal_help arg... ++# Echo program name prefixed message to standard error, followed by ++# a help hint, and exit. ++func_fatal_help () ++{ ++ func_error ${1+"$@"} ++ func_fatal_error "$help" ++} ++help="Try \`$progname --help' for more information." ## default ++ ++ ++# func_grep expression filename ++# Check whether EXPRESSION matches any line of FILENAME, without output. ++func_grep () ++{ ++ $GREP "$1" "$2" >/dev/null 2>&1 ++} ++ ++ ++# func_mkdir_p directory-path ++# Make sure the entire path to DIRECTORY-PATH is available. ++func_mkdir_p () ++{ ++ my_directory_path="$1" ++ my_dir_list= ++ ++ if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then ++ ++ # Protect directory names starting with `-' ++ case $my_directory_path in ++ -*) my_directory_path="./$my_directory_path" ;; ++ esac ++ ++ # While some portion of DIR does not yet exist... ++ while test ! -d "$my_directory_path"; do ++ # ...make a list in topmost first order. Use a colon delimited ++ # list incase some portion of path contains whitespace. ++ my_dir_list="$my_directory_path:$my_dir_list" ++ ++ # If the last portion added has no slash in it, the list is done ++ case $my_directory_path in */*) ;; *) break ;; esac ++ ++ # ...otherwise throw away the child directory and loop ++ my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"` ++ done ++ my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'` ++ ++ save_mkdir_p_IFS="$IFS"; IFS=':' ++ for my_dir in $my_dir_list; do ++ IFS="$save_mkdir_p_IFS" ++ # mkdir can fail with a `File exist' error if two processes ++ # try to create one of the directories concurrently. Don't ++ # stop in that case! ++ $MKDIR "$my_dir" 2>/dev/null || : ++ done ++ IFS="$save_mkdir_p_IFS" ++ ++ # Bail out if we (or some other process) failed to create a directory. ++ test -d "$my_directory_path" || \ ++ func_fatal_error "Failed to create \`$1'" ++ fi ++} + +-##################################### +-# Shell function definitions: +-# This seems to be the best place for them + + # func_mktempdir [string] + # Make a temporary directory that won't clash with other running +@@ -161,7 +355,7 @@ + { + my_template="${TMPDIR-/tmp}/${1-$progname}" + +- if test "$run" = ":"; then ++ if test "$opt_dry_run" = ":"; then + # Return a directory name, but don't create it in dry-run mode + my_tmpdir="${my_template}-$$" + else +@@ -170,525 +364,785 @@ + my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` + + if test ! -d "$my_tmpdir"; then +- # Failing that, at least try and use $RANDOM to avoid a race +- my_tmpdir="${my_template}-${RANDOM-0}$$" ++ # Failing that, at least try and use $RANDOM to avoid a race ++ my_tmpdir="${my_template}-${RANDOM-0}$$" + +- save_mktempdir_umask=`umask` +- umask 0077 +- $mkdir "$my_tmpdir" +- umask $save_mktempdir_umask ++ save_mktempdir_umask=`umask` ++ umask 0077 ++ $MKDIR "$my_tmpdir" ++ umask $save_mktempdir_umask + fi + + # If we're not in dry-run mode, bomb out on failure +- test -d "$my_tmpdir" || { +- $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2 +- exit $EXIT_FAILURE +- } ++ test -d "$my_tmpdir" || \ ++ func_fatal_error "cannot create temporary directory \`$my_tmpdir'" + fi + +- $echo "X$my_tmpdir" | $Xsed ++ $ECHO "X$my_tmpdir" | $Xsed + } + + +-# func_win32_libid arg +-# return the library type of file 'arg' +-# +-# Need a lot of goo to handle *both* DLLs and import libs +-# Has to be a shell function in order to 'eat' the argument +-# that is supplied when $file_magic_command is called. +-func_win32_libid () ++# func_quote_for_eval arg ++# Aesthetically quote ARG to be evaled later. ++# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT ++# is double-quoted, suitable for a subsequent eval, whereas ++# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters ++# which are still active within double quotes backslashified. ++func_quote_for_eval () + { +- win32_libid_type="unknown" +- win32_fileres=`file -L $1 2>/dev/null` +- case $win32_fileres in +- *ar\ archive\ import\ library*) # definitely import +- win32_libid_type="x86 archive import" +- ;; +- *ar\ archive*) # could be an import, or static +- if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \ +- $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then +- win32_nmres=`eval $NM -f posix -A $1 | \ +- $SED -n -e '1,100{ +- / I /{ +- s,.*,import, +- p +- q +- } +- }'` +- case $win32_nmres in +- import*) win32_libid_type="x86 archive import";; +- *) win32_libid_type="x86 archive static";; +- esac +- fi +- ;; +- *DLL*) +- win32_libid_type="x86 DLL" +- ;; +- *executable*) # but shell scripts are "executable" too... +- case $win32_fileres in +- *MS\ Windows\ PE\ Intel*) +- win32_libid_type="x86 DLL" +- ;; ++ case $1 in ++ *[\\\`\"\$]*) ++ func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;; ++ *) ++ func_quote_for_eval_unquoted_result="$1" ;; ++ esac ++ ++ case $func_quote_for_eval_unquoted_result in ++ # Double-quote args containing shell metacharacters to delay ++ # word splitting, command substitution and and variable ++ # expansion for a subsequent eval. ++ # Many Bourne shells cannot handle close brackets correctly ++ # in scan sets, so we specify it separately. ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" ++ ;; ++ *) ++ func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" + esac +- ;; +- esac +- $echo $win32_libid_type + } + + +-# func_infer_tag arg +-# Infer tagged configuration to use if any are available and +-# if one wasn't chosen via the "--tag" command line option. +-# Only attempt this if the compiler in the base compile +-# command doesn't match the default compiler. +-# arg is usually of the form 'gcc ...' +-func_infer_tag () ++# func_quote_for_expand arg ++# Aesthetically quote ARG to be evaled later; same as above, ++# but do not quote variable references. ++func_quote_for_expand () + { +- if test -n "$available_tags" && test -z "$tagname"; then +- CC_quoted= +- for arg in $CC; do +- case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac +- CC_quoted="$CC_quoted $arg" +- done +- case $@ in +- # Blanks in the command may have been stripped by the calling shell, +- # but not from the CC environment variable when configure was run. +- " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;; +- # Blanks at the start of $base_compile will cause this to fail +- # if we don't check for them as well. ++ case $1 in ++ *[\\\`\"]*) ++ my_arg=`$ECHO "X$1" | $Xsed \ ++ -e "$double_quote_subst" -e "$sed_double_backslash"` ;; + *) +- for z in $available_tags; do +- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then +- # Evaluate the configuration. +- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" +- CC_quoted= +- for arg in $CC; do +- # Double-quote args containing other shell metacharacters. +- case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac +- CC_quoted="$CC_quoted $arg" +- done +- case "$@ " in +- " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) +- # The compiler in the base compile command matches +- # the one in the tagged configuration. +- # Assume this is the tagged configuration we want. +- tagname=$z +- break +- ;; +- esac +- fi +- done +- # If $tagname still isn't set, then no tagged configuration +- # was found and let the user know that the "--tag" command +- # line option must be used. +- if test -z "$tagname"; then +- $echo "$modename: unable to infer tagged configuration" +- $echo "$modename: specify a tag with \`--tag'" 1>&2 +- exit $EXIT_FAILURE +-# else +-# $echo "$modename: using $tagname tagged configuration" +- fi +- ;; +- esac +- fi ++ my_arg="$1" ;; ++ esac ++ ++ case $my_arg in ++ # Double-quote args containing shell metacharacters to delay ++ # word splitting and command substitution for a subsequent eval. ++ # Many Bourne shells cannot handle close brackets correctly ++ # in scan sets, so we specify it separately. ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ my_arg="\"$my_arg\"" ++ ;; ++ esac ++ ++ func_quote_for_expand_result="$my_arg" + } + + +-# func_extract_an_archive dir oldlib +-func_extract_an_archive () ++# func_show_eval cmd [fail_exp] ++# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is ++# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP ++# is given, then evaluate it. ++func_show_eval () + { +- f_ex_an_ar_dir="$1"; shift +- f_ex_an_ar_oldlib="$1" ++ my_cmd="$1" ++ my_fail_exp="${2-:}" + +- $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)" +- $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $? +- if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then +- : +- else +- $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2 +- exit $EXIT_FAILURE ++ ${opt_silent-false} || { ++ func_quote_for_expand "$my_cmd" ++ eval "func_echo $func_quote_for_expand_result" ++ } ++ ++ if ${opt_dry_run-false}; then :; else ++ eval "$my_cmd" ++ my_status=$? ++ if test "$my_status" -eq 0; then :; else ++ eval "(exit $my_status); $my_fail_exp" ++ fi + fi + } + +-# func_extract_archives gentop oldlib ... +-func_extract_archives () ++ ++# func_show_eval_locale cmd [fail_exp] ++# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is ++# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP ++# is given, then evaluate it. Use the saved locale for evaluation. ++func_show_eval_locale () + { +- my_gentop="$1"; shift +- my_oldlibs=${1+"$@"} +- my_oldobjs="" +- my_xlib="" +- my_xabs="" +- my_xdir="" +- my_status="" ++ my_cmd="$1" ++ my_fail_exp="${2-:}" ++ ++ ${opt_silent-false} || { ++ func_quote_for_expand "$my_cmd" ++ eval "func_echo $func_quote_for_expand_result" ++ } + +- $show "${rm}r $my_gentop" +- $run ${rm}r "$my_gentop" +- $show "$mkdir $my_gentop" +- $run $mkdir "$my_gentop" +- my_status=$? +- if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then +- exit $my_status ++ if ${opt_dry_run-false}; then :; else ++ eval "$lt_user_locale ++ $my_cmd" ++ my_status=$? ++ eval "$lt_safe_locale" ++ if test "$my_status" -eq 0; then :; else ++ eval "(exit $my_status); $my_fail_exp" ++ fi + fi ++} + +- for my_xlib in $my_oldlibs; do +- # Extract the objects. +- case $my_xlib in +- [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; +- *) my_xabs=`pwd`"/$my_xlib" ;; +- esac +- my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'` +- my_xlib_u=$my_xlib +- while :; do +- case " $extracted_archives " in +- *" $my_xlib_u "*) +- extracted_serial=`expr $extracted_serial + 1` +- my_xlib_u=lt$extracted_serial-$my_xlib ;; +- *) break ;; +- esac +- done +- extracted_archives="$extracted_archives $my_xlib_u" +- my_xdir="$my_gentop/$my_xlib_u" + +- $show "${rm}r $my_xdir" +- $run ${rm}r "$my_xdir" +- $show "$mkdir $my_xdir" +- $run $mkdir "$my_xdir" +- exit_status=$? +- if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then +- exit $exit_status +- fi +- case $host in +- *-darwin*) +- $show "Extracting $my_xabs" +- # Do not bother doing anything if just a dry run +- if test -z "$run"; then +- darwin_orig_dir=`pwd` +- cd $my_xdir || exit $? +- darwin_archive=$my_xabs +- darwin_curdir=`pwd` +- darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'` +- darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null` +- if test -n "$darwin_arches"; then +- darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'` +- darwin_arch= +- $show "$darwin_base_archive has multiple architectures $darwin_arches" +- for darwin_arch in $darwin_arches ; do +- mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}" +- lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" +- cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" +- func_extract_an_archive "`pwd`" "${darwin_base_archive}" +- cd "$darwin_curdir" +- $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" +- done # $darwin_arches +- ## Okay now we have a bunch of thin objects, gotta fatten them up :) +- darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP` +- darwin_file= +- darwin_files= +- for darwin_file in $darwin_filelist; do +- darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` +- lipo -create -output "$darwin_file" $darwin_files +- done # $darwin_filelist +- ${rm}r unfat-$$ +- cd "$darwin_orig_dir" +- else +- cd "$darwin_orig_dir" +- func_extract_an_archive "$my_xdir" "$my_xabs" +- fi # $darwin_arches +- fi # $run +- ;; +- *) +- func_extract_an_archive "$my_xdir" "$my_xabs" +- ;; +- esac +- my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` +- done +- func_extract_archives_result="$my_oldobjs" ++ ++ ++ ++# func_version ++# Echo version message to standard output and exit. ++func_version () ++{ ++ $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / { ++ s/^# // ++ s/^# *$// ++ s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ ++ p ++ }' < "$progpath" ++ exit $? ++} ++ ++# func_usage ++# Echo short help message to standard output and exit. ++func_usage () ++{ ++ $SED -n '/^# Usage:/,/# -h/ { ++ s/^# // ++ s/^# *$// ++ s/\$progname/'$progname'/ ++ p ++ }' < "$progpath" ++ $ECHO ++ $ECHO "run \`$progname --help | more' for full usage" ++ exit $? ++} ++ ++# func_help ++# Echo long help message to standard output and exit. ++func_help () ++{ ++ $SED -n '/^# Usage:/,/# Report bugs to/ { ++ s/^# // ++ s/^# *$// ++ s*\$progname*'$progname'* ++ s*\$host*'"$host"'* ++ s*\$SHELL*'"$SHELL"'* ++ s*\$LTCC*'"$LTCC"'* ++ s*\$LTCFLAGS*'"$LTCFLAGS"'* ++ s*\$LD*'"$LD"'* ++ s/\$with_gnu_ld/'"$with_gnu_ld"'/ ++ s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ ++ s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ ++ p ++ }' < "$progpath" ++ exit $? ++} ++ ++# func_missing_arg argname ++# Echo program name prefixed message to standard error and set global ++# exit_cmd. ++func_missing_arg () ++{ ++ func_error "missing argument for $1" ++ exit_cmd=exit + } +-# End of Shell function definitions +-##################################### + +-# Darwin sucks +-eval std_shrext=\"$shrext_cmds\" ++exit_cmd=: + +-disable_libs=no + +-# Parse our command line options once, thoroughly. +-while test "$#" -gt 0 +-do +- arg="$1" ++ ++ ++ ++# Check that we have a working $ECHO. ++if test "X$1" = X--no-reexec; then ++ # Discard the --no-reexec flag, and continue. + shift ++elif test "X$1" = X--fallback-echo; then ++ # Avoid inline document here, it may be left over ++ : ++elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then ++ # Yippee, $ECHO works! ++ : ++else ++ # Restart under the correct shell, and then maybe $ECHO will work. ++ exec $SHELL "$progpath" --no-reexec ${1+"$@"} ++fi + +- case $arg in +- -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; +- *) optarg= ;; +- esac ++if test "X$1" = X--fallback-echo; then ++ # used as fallback echo ++ shift ++ cat <&2 +- exit $EXIT_FAILURE +- ;; +- esac ++magic="%%%MAGIC variable%%%" ++magic_exe="%%%MAGIC EXE variable%%%" + +- case $tagname in +- CC) +- # Don't test for the "default" C tag, as we know, it's there, but +- # not specially marked. +- ;; +- *) +- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then +- taglist="$taglist $tagname" +- # Evaluate the configuration. +- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`" +- else +- $echo "$progname: ignoring unknown tag $tagname" 1>&2 +- fi +- ;; +- esac +- ;; +- *) +- eval "$prev=\$arg" +- ;; +- esac ++# Global variables. ++# $mode is unset ++nonopt= ++execute_dlfiles= ++preserve_args= ++lo2o="s/\\.lo\$/.${objext}/" ++o2lo="s/\\.${objext}\$/.lo/" ++extracted_archives= ++extracted_serial=0 + +- prev= +- prevopt= +- continue +- fi ++opt_dry_run=false ++opt_duplicate_deps=false ++opt_silent=false ++opt_debug=: + +- # Have we seen a non-optional argument yet? +- case $arg in +- --help) +- show_help=yes +- ;; ++# If this variable is set in any of the actions, the command in it ++# will be execed at the end. This prevents here-documents from being ++# left over by shells. ++exec_cmd= + +- --version) +- echo "\ +-$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP +- +-Copyright (C) 2007 Free Software Foundation, Inc. +-This is free software; see the source for copying conditions. There is NO +-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." +- exit $? +- ;; ++# func_fatal_configuration arg... ++# Echo program name prefixed message to standard error, followed by ++# a configuration failure hint, and exit. ++func_fatal_configuration () ++{ ++ func_error ${1+"$@"} ++ func_error "See the $PACKAGE documentation for more information." ++ func_fatal_error "Fatal configuration error." ++} ++ ++ ++# func_config ++# Display the configuration for all the tags in this script. ++func_config () ++{ ++ re_begincf='^# ### BEGIN LIBTOOL' ++ re_endcf='^# ### END LIBTOOL' ++ ++ # Default configuration. ++ $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" + +- --config) +- ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath + # Now print the configurations for the tags. + for tagname in $taglist; do +- ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath" ++ $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" + done +- exit $? +- ;; +- +- --debug) +- $echo "$progname: enabling shell trace mode" +- set -x +- preserve_args="$preserve_args $arg" +- ;; + +- --dry-run | -n) +- run=: +- ;; ++ exit $? ++} + +- --features) +- $echo "host: $host" ++# func_features ++# Display the features supported by this script. ++func_features () ++{ ++ $ECHO "host: $host" + if test "$build_libtool_libs" = yes; then +- $echo "enable shared libraries" ++ $ECHO "enable shared libraries" + else +- $echo "disable shared libraries" ++ $ECHO "disable shared libraries" + fi + if test "$build_old_libs" = yes; then +- $echo "enable static libraries" ++ $ECHO "enable static libraries" + else +- $echo "disable static libraries" ++ $ECHO "disable static libraries" + fi ++ + exit $? +- ;; ++} + +- --finish) mode="finish" ;; ++# func_enable_tag tagname ++# Verify that TAGNAME is valid, and either flag an error and exit, or ++# enable the TAGNAME tag. We also add TAGNAME to the global $taglist ++# variable here. ++func_enable_tag () ++{ ++ # Global variable: ++ tagname="$1" ++ ++ re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" ++ re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" ++ sed_extractcf="/$re_begincf/,/$re_endcf/p" ++ ++ # Validate tagname. ++ case $tagname in ++ *[!-_A-Za-z0-9,/]*) ++ func_fatal_error "invalid tag name: $tagname" ++ ;; ++ esac + +- --mode) prevopt="--mode" prev=mode ;; +- --mode=*) mode="$optarg" ;; ++ # Don't test for the "default" C tag, as we know it's ++ # there but not specially marked. ++ case $tagname in ++ CC) ;; ++ *) ++ if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then ++ taglist="$taglist $tagname" + +- --preserve-dup-deps) duplicate_deps="yes" ;; ++ # Evaluate the configuration. Be careful to quote the path ++ # and the sed script, to avoid splitting on whitespace, but ++ # also don't use non-portable quotes within backquotes within ++ # quotes we have to do it in 2 steps: ++ extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` ++ eval "$extractedcf" ++ else ++ func_error "ignoring unknown tag $tagname" ++ fi ++ ;; ++ esac ++} + +- --quiet | --silent) +- show=: +- preserve_args="$preserve_args $arg" +- ;; ++# Parse options once, thoroughly. This comes as soon as possible in ++# the script to make things like `libtool --version' happen quickly. ++{ + +- --tag) +- prevopt="--tag" +- prev=tag +- preserve_args="$preserve_args --tag" ++ # Shorthand for --mode=foo, only valid as the first argument ++ case $1 in ++ clean|clea|cle|cl) ++ shift; set dummy --mode clean ${1+"$@"}; shift + ;; +- --tag=*) +- set tag "$optarg" ${1+"$@"} +- shift +- prev=tag +- preserve_args="$preserve_args --tag" ++ compile|compil|compi|comp|com|co|c) ++ shift; set dummy --mode compile ${1+"$@"}; shift + ;; +- +- -dlopen) +- prevopt="-dlopen" +- prev=execute_dlfiles ++ execute|execut|execu|exec|exe|ex|e) ++ shift; set dummy --mode execute ${1+"$@"}; shift + ;; +- +- -*) +- $echo "$modename: unrecognized option \`$arg'" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE ++ finish|finis|fini|fin|fi|f) ++ shift; set dummy --mode finish ${1+"$@"}; shift + ;; +- +- *) +- nonopt="$arg" +- break ++ install|instal|insta|inst|ins|in|i) ++ shift; set dummy --mode install ${1+"$@"}; shift ++ ;; ++ link|lin|li|l) ++ shift; set dummy --mode link ${1+"$@"}; shift ++ ;; ++ uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) ++ shift; set dummy --mode uninstall ${1+"$@"}; shift + ;; + esac +-done + +-if test -n "$prevopt"; then +- $echo "$modename: option \`$prevopt' requires an argument" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +-fi ++ # Parse non-mode specific arguments: ++ while test "$#" -gt 0; do ++ opt="$1" ++ shift + +-case $disable_libs in +-no) +- ;; +-shared) +- build_libtool_libs=no +- build_old_libs=yes +- ;; +-static) +- build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` +- ;; +-esac ++ case $opt in ++ --config) func_config ;; + +-# If this variable is set in any of the actions, the command in it +-# will be execed at the end. This prevents here-documents from being +-# left over by shells. +-exec_cmd= ++ --debug) preserve_args="$preserve_args $opt" ++ func_echo "enabling shell trace mode" ++ opt_debug='set -x' ++ $opt_debug ++ ;; + +-if test -z "$show_help"; then ++ -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break ++ execute_dlfiles="$execute_dlfiles $1" ++ shift ++ ;; + +- # Infer the operation mode. +- if test -z "$mode"; then +- $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2 +- $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2 +- case $nonopt in +- *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*) +- mode=link +- for arg +- do +- case $arg in +- -c) +- mode=compile +- break +- ;; +- esac +- done +- ;; +- *db | *dbx | *strace | *truss) +- mode=execute +- ;; +- *install*|cp|mv) +- mode=install +- ;; +- *rm) +- mode=uninstall ++ --dry-run | -n) opt_dry_run=: ;; ++ --features) func_features ;; ++ --finish) mode="finish" ;; ++ ++ --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break ++ case $1 in ++ # Valid mode arguments: ++ clean) ;; ++ compile) ;; ++ execute) ;; ++ finish) ;; ++ install) ;; ++ link) ;; ++ relink) ;; ++ uninstall) ;; ++ ++ # Catch anything else as an error ++ *) func_error "invalid argument for $opt" ++ exit_cmd=exit ++ break ++ ;; ++ esac ++ ++ mode="$1" ++ shift ++ ;; ++ ++ --preserve-dup-deps) ++ opt_duplicate_deps=: ;; ++ ++ --quiet|--silent) preserve_args="$preserve_args $opt" ++ opt_silent=: ++ ;; ++ ++ --verbose| -v) preserve_args="$preserve_args $opt" ++ opt_silent=false ++ ;; ++ ++ --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break ++ preserve_args="$preserve_args $opt $1" ++ func_enable_tag "$1" # tagname is set here ++ shift ++ ;; ++ ++ # Separate optargs to long options: ++ -dlopen=*|--mode=*|--tag=*) ++ func_opt_split "$opt" ++ set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"} ++ shift ++ ;; ++ ++ -\?|-h) func_usage ;; ++ --help) opt_help=: ;; ++ --version) func_version ;; ++ ++ -*) func_fatal_help "unrecognized option \`$opt'" ;; ++ ++ *) nonopt="$opt" ++ break ++ ;; ++ esac ++ done ++ ++ ++ case $host in ++ *cygwin* | *mingw* | *pw32*) ++ # don't eliminate duplications in $postdeps and $predeps ++ opt_duplicate_compiler_generated_deps=: + ;; + *) +- # If we have no mode, but dlfiles were specified, then do execute mode. +- test -n "$execute_dlfiles" && mode=execute ++ opt_duplicate_compiler_generated_deps=$opt_duplicate_deps ++ ;; ++ esac + +- # Just use the default operation mode. +- if test -z "$mode"; then +- if test -n "$nonopt"; then +- $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 +- else +- $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 +- fi ++ # Having warned about all mis-specified options, bail out if ++ # anything was wrong. ++ $exit_cmd $EXIT_FAILURE ++} ++ ++# func_check_version_match ++# Ensure that we are using m4 macros, and libtool script from the same ++# release of libtool. ++func_check_version_match () ++{ ++ if test "$package_revision" != "$macro_revision"; then ++ if test "$VERSION" != "$macro_version"; then ++ if test -z "$macro_version"; then ++ cat >&2 <<_LT_EOF ++$progname: Version mismatch error. This is $PACKAGE $VERSION, but the ++$progname: definition of this LT_INIT comes from an older release. ++$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION ++$progname: and run autoconf again. ++_LT_EOF ++ else ++ cat >&2 <<_LT_EOF ++$progname: Version mismatch error. This is $PACKAGE $VERSION, but the ++$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. ++$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION ++$progname: and run autoconf again. ++_LT_EOF + fi +- ;; +- esac ++ else ++ cat >&2 <<_LT_EOF ++$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, ++$progname: but the definition of this LT_INIT comes from revision $macro_revision. ++$progname: You should recreate aclocal.m4 with macros from revision $package_revision ++$progname: of $PACKAGE $VERSION and run autoconf again. ++_LT_EOF ++ fi ++ ++ exit $EXIT_MISMATCH ++ fi ++} ++ ++ ++## ----------- ## ++## Main. ## ++## ----------- ## ++ ++$opt_help || { ++ # Sanity checks first: ++ func_check_version_match ++ ++ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then ++ func_fatal_configuration "not configured to build any kind of library" + fi + ++ test -z "$mode" && func_fatal_error "error: you must specify a MODE." ++ ++ ++ # Darwin sucks ++ eval std_shrext=\"$shrext_cmds\" ++ ++ + # Only execute mode is allowed to have -dlopen flags. + if test -n "$execute_dlfiles" && test "$mode" != execute; then +- $echo "$modename: unrecognized option \`-dlopen'" 1>&2 +- $echo "$help" 1>&2 ++ func_error "unrecognized option \`-dlopen'" ++ $ECHO "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Change the help message to a mode-specific one. + generic_help="$help" +- help="Try \`$modename --help --mode=$mode' for more information." ++ help="Try \`$progname --help --mode=$mode' for more information." ++} + +- # These modes are in order of execution frequency so that they run quickly. +- case $mode in +- # libtool compile mode +- compile) +- modename="$modename: compile" +- # Get the compilation command and the source file. +- base_compile= +- srcfile="$nonopt" # always keep a non-empty value in "srcfile" +- suppress_opt=yes +- suppress_output= +- arg_mode=normal +- libobj= +- later= + +- for arg +- do +- case $arg_mode in +- arg ) +- # do not "continue". Instead, add this to base_compile +- lastarg="$arg" +- arg_mode=normal +- ;; ++# func_lalib_p file ++# True iff FILE is a libtool `.la' library or `.lo' object file. ++# This function is only a basic sanity check; it will hardly flush out ++# determined imposters. ++func_lalib_p () ++{ ++ $SED -e 4q "$1" 2>/dev/null \ ++ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 ++} + +- target ) +- libobj="$arg" +- arg_mode=normal +- continue +- ;; ++# func_lalib_unsafe_p file ++# True iff FILE is a libtool `.la' library or `.lo' object file. ++# This function implements the same check as func_lalib_p without ++# resorting to external programs. To this end, it redirects stdin and ++# closes it afterwards, without saving the original file descriptor. ++# As a safety measure, use it only where a negative result would be ++# fatal anyway. Works if `file' does not exist. ++func_lalib_unsafe_p () ++{ ++ lalib_p=no ++ if test -r "$1" && exec 5<&0 <"$1"; then ++ for lalib_p_l in 1 2 3 4 ++ do ++ read lalib_p_line ++ case "$lalib_p_line" in ++ \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; ++ esac ++ done ++ exec 0<&5 5<&- ++ fi ++ test "$lalib_p" = yes ++} + +- normal ) +- # Accept any command-line options. +- case $arg in +- -o) +- if test -n "$libobj" ; then +- $echo "$modename: you cannot specify \`-o' more than once" 1>&2 +- exit $EXIT_FAILURE +- fi +- arg_mode=target +- continue +- ;; ++# func_ltwrapper_script_p file ++# True iff FILE is a libtool wrapper script ++# This function is only a basic sanity check; it will hardly flush out ++# determined imposters. ++func_ltwrapper_script_p () ++{ ++ func_lalib_p "$1" ++} + +- -static | -prefer-pic | -prefer-non-pic) +- later="$later $arg" +- continue ++# func_ltwrapper_executable_p file ++# True iff FILE is a libtool wrapper executable ++# This function is only a basic sanity check; it will hardly flush out ++# determined imposters. ++func_ltwrapper_executable_p () ++{ ++ func_ltwrapper_exec_suffix= ++ case $1 in ++ *.exe) ;; ++ *) func_ltwrapper_exec_suffix=.exe ;; ++ esac ++ $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 ++} ++ ++# func_ltwrapper_scriptname file ++# Assumes file is an ltwrapper_executable ++# uses $file to determine the appropriate filename for a ++# temporary ltwrapper_script. ++func_ltwrapper_scriptname () ++{ ++ func_ltwrapper_scriptname_result="" ++ if func_ltwrapper_executable_p "$1"; then ++ func_dirname_and_basename "$1" "" "." ++ func_stripname '' '.exe' "$func_basename_result" ++ func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" ++ fi ++} ++ ++# func_ltwrapper_p file ++# True iff FILE is a libtool wrapper script or wrapper executable ++# This function is only a basic sanity check; it will hardly flush out ++# determined imposters. ++func_ltwrapper_p () ++{ ++ func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" ++} ++ ++ ++# func_execute_cmds commands fail_cmd ++# Execute tilde-delimited COMMANDS. ++# If FAIL_CMD is given, eval that upon failure. ++# FAIL_CMD may read-access the current command in variable CMD! ++func_execute_cmds () ++{ ++ $opt_debug ++ save_ifs=$IFS; IFS='~' ++ for cmd in $1; do ++ IFS=$save_ifs ++ eval cmd=\"$cmd\" ++ func_show_eval "$cmd" "${2-:}" ++ done ++ IFS=$save_ifs ++} ++ ++ ++# func_source file ++# Source FILE, adding directory component if necessary. ++# Note that it is not necessary on cygwin/mingw to append a dot to ++# FILE even if both FILE and FILE.exe exist: automatic-append-.exe ++# behavior happens only for exec(3), not for open(2)! Also, sourcing ++# `FILE.' does not work on cygwin managed mounts. ++func_source () ++{ ++ $opt_debug ++ case $1 in ++ */* | *\\*) . "$1" ;; ++ *) . "./$1" ;; ++ esac ++} ++ ++ ++# func_infer_tag arg ++# Infer tagged configuration to use if any are available and ++# if one wasn't chosen via the "--tag" command line option. ++# Only attempt this if the compiler in the base compile ++# command doesn't match the default compiler. ++# arg is usually of the form 'gcc ...' ++func_infer_tag () ++{ ++ $opt_debug ++ if test -n "$available_tags" && test -z "$tagname"; then ++ CC_quoted= ++ for arg in $CC; do ++ func_quote_for_eval "$arg" ++ CC_quoted="$CC_quoted $func_quote_for_eval_result" ++ done ++ case $@ in ++ # Blanks in the command may have been stripped by the calling shell, ++ # but not from the CC environment variable when configure was run. ++ " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;; ++ # Blanks at the start of $base_compile will cause this to fail ++ # if we don't check for them as well. ++ *) ++ for z in $available_tags; do ++ if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then ++ # Evaluate the configuration. ++ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" ++ CC_quoted= ++ for arg in $CC; do ++ # Double-quote args containing other shell metacharacters. ++ func_quote_for_eval "$arg" ++ CC_quoted="$CC_quoted $func_quote_for_eval_result" ++ done ++ case "$@ " in ++ " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ++ # The compiler in the base compile command matches ++ # the one in the tagged configuration. ++ # Assume this is the tagged configuration we want. ++ tagname=$z ++ break ++ ;; ++ esac ++ fi ++ done ++ # If $tagname still isn't set, then no tagged configuration ++ # was found and let the user know that the "--tag" command ++ # line option must be used. ++ if test -z "$tagname"; then ++ func_echo "unable to infer tagged configuration" ++ func_fatal_error "specify a tag with \`--tag'" ++# else ++# func_verbose "using $tagname tagged configuration" ++ fi ++ ;; ++ esac ++ fi ++} ++ ++ ++ ++# func_write_libtool_object output_name pic_name nonpic_name ++# Create a libtool object file (analogous to a ".la" file), ++# but don't create it if we're doing a dry run. ++func_write_libtool_object () ++{ ++ write_libobj=${1} ++ if test "$build_libtool_libs" = yes; then ++ write_lobj=\'${2}\' ++ else ++ write_lobj=none ++ fi ++ ++ if test "$build_old_libs" = yes; then ++ write_oldobj=\'${3}\' ++ else ++ write_oldobj=none ++ fi ++ ++ $opt_dry_run || { ++ cat >${write_libobj}T <\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac +- lastarg="$lastarg $arg" ++ func_quote_for_eval "$arg" ++ lastarg="$lastarg $func_quote_for_eval_result" + done + IFS="$save_ifs" +- lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` ++ func_stripname ' ' '' "$lastarg" ++ lastarg=$func_stripname_result + + # Add the arguments to base_compile. + base_compile="$base_compile $lastarg" + continue + ;; + +- * ) ++ *) + # Accept the current argument as the source file. + # The previous "srcfile" becomes the current argument. + # +@@ -738,65 +1186,42 @@ + esac # case $arg_mode + + # Aesthetically quote the previous argument. +- lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` +- +- case $lastarg in +- # Double-quote args containing other shell metacharacters. +- # Many Bourne shells cannot handle close brackets correctly +- # in scan sets, and some SunOS ksh mistreat backslash-escaping +- # in scan sets (worked around with variable expansion), +- # and furthermore cannot handle '|' '&' '(' ')' in scan sets +- # at all, so we specify them separately. +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- lastarg="\"$lastarg\"" +- ;; +- esac +- +- base_compile="$base_compile $lastarg" ++ func_quote_for_eval "$lastarg" ++ base_compile="$base_compile $func_quote_for_eval_result" + done # for arg + + case $arg_mode in + arg) +- $echo "$modename: you must specify an argument for -Xcompile" +- exit $EXIT_FAILURE ++ func_fatal_error "you must specify an argument for -Xcompile" + ;; + target) +- $echo "$modename: you must specify a target with \`-o'" 1>&2 +- exit $EXIT_FAILURE ++ func_fatal_error "you must specify a target with \`-o'" + ;; + *) + # Get the name of the library object. +- [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` ++ test -z "$libobj" && { ++ func_basename "$srcfile" ++ libobj="$func_basename_result" ++ } + ;; + esac + + # Recognize several different file suffixes. + # If the user specifies -o file.o, it is replaced with file.lo +- xform='[cCFSifmso]' + case $libobj in +- *.ada) xform=ada ;; +- *.adb) xform=adb ;; +- *.ads) xform=ads ;; +- *.asm) xform=asm ;; +- *.c++) xform=c++ ;; +- *.cc) xform=cc ;; +- *.ii) xform=ii ;; +- *.class) xform=class ;; +- *.cpp) xform=cpp ;; +- *.cxx) xform=cxx ;; +- *.[fF][09]?) xform=[fF][09]. ;; +- *.for) xform=for ;; +- *.java) xform=java ;; +- *.obj) xform=obj ;; ++ *.[cCFSifmso] | \ ++ *.ada | *.adb | *.ads | *.asm | \ ++ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ ++ *.[fF][09]? | *.for | *.java | *.obj | *.sx) ++ func_xform "$libobj" ++ libobj=$func_xform_result ++ ;; + esac + +- libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` +- + case $libobj in +- *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; ++ *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; + *) +- $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 +- exit $EXIT_FAILURE ++ func_fatal_error "cannot determine name of library object from \`$libobj'" + ;; + esac + +@@ -804,7 +1229,15 @@ + + for arg in $later; do + case $arg in ++ -shared) ++ test "$build_libtool_libs" != yes && \ ++ func_fatal_configuration "can not build a shared library" ++ build_old_libs=no ++ continue ++ ;; ++ + -static) ++ build_libtool_libs=no + build_old_libs=yes + continue + ;; +@@ -821,28 +1254,17 @@ + esac + done + +- qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"` +- case $qlibobj in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- qlibobj="\"$qlibobj\"" ;; +- esac +- test "X$libobj" != "X$qlibobj" \ +- && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \ +- && $echo "$modename: libobj name \`$libobj' may not contain shell special characters." +- objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` +- xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$xdir" = "X$obj"; then +- xdir= +- else +- xdir=$xdir/ +- fi ++ func_quote_for_eval "$libobj" ++ test "X$libobj" != "X$func_quote_for_eval_result" \ ++ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ ++ && func_warning "libobj name \`$libobj' may not contain shell special characters." ++ func_dirname_and_basename "$obj" "/" "" ++ objname="$func_basename_result" ++ xdir="$func_dirname_result" + lobj=${xdir}$objdir/$objname + +- if test -z "$base_compile"; then +- $echo "$modename: you must specify a compilation command" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- fi ++ test -z "$base_compile" && \ ++ func_fatal_help "you must specify a compilation command" + + # Delete any leftover library objects. + if test "$build_old_libs" = yes; then +@@ -851,9 +1273,6 @@ + removelist="$lobj $libobj ${libobj}T" + fi + +- $run $rm $removelist +- trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 +- + # On Cygwin there's no "real" PIC flag so we must build both object types + case $host_os in + cygwin* | mingw* | pw32* | os2*) +@@ -868,10 +1287,8 @@ + # Calculate the filename of the output object if compiler does + # not support -o with -c + if test "$compiler_c_o" = no; then +- output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} ++ output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} + lockfile="$output_obj.lock" +- removelist="$removelist $output_obj $lockfile" +- trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 + else + output_obj= + need_locks=no +@@ -881,13 +1298,13 @@ + # Lock this critical section if it is needed + # We use this script file to make the link, it avoids creating a new file + if test "$need_locks" = yes; then +- until $run ln "$progpath" "$lockfile" 2>/dev/null; do +- $show "Waiting for $lockfile to be removed" ++ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do ++ func_echo "Waiting for $lockfile to be removed" + sleep 2 + done + elif test "$need_locks" = warn; then + if test -f "$lockfile"; then +- $echo "\ ++ $ECHO "\ + *** ERROR, $lockfile exists and contains: + `cat $lockfile 2>/dev/null` + +@@ -898,34 +1315,22 @@ + avoid parallel builds (make -j) in this platform, or get a better + compiler." + +- $run $rm $removelist ++ $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi +- $echo "$srcfile" > "$lockfile" ++ removelist="$removelist $output_obj" ++ $ECHO "$srcfile" > "$lockfile" + fi + ++ $opt_dry_run || $RM $removelist ++ removelist="$removelist $lockfile" ++ trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 ++ + if test -n "$fix_srcfile_path"; then + eval srcfile=\"$fix_srcfile_path\" + fi +- qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"` +- case $qsrcfile in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- qsrcfile="\"$qsrcfile\"" ;; +- esac +- +- $run $rm "$libobj" "${libobj}T" +- +- # Create a libtool object file (analogous to a ".la" file), +- # but don't create it if we're doing a dry run. +- test -z "$run" && cat > ${libobj}T </dev/null`" != "X$srcfile"; then +- $echo "\ ++ $ECHO "\ + *** ERROR, $lockfile contains: + `cat $lockfile 2>/dev/null` + +@@ -978,45 +1370,27 @@ + avoid parallel builds (make -j) in this platform, or get a better + compiler." + +- $run $rm $removelist ++ $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed, then go on to compile the next one + if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then +- $show "$mv $output_obj $lobj" +- if $run $mv $output_obj $lobj; then : +- else +- error=$? +- $run $rm $removelist +- exit $error +- fi ++ func_show_eval '$MV "$output_obj" "$lobj"' \ ++ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + +- # Append the name of the PIC object to the libtool object file. +- test -z "$run" && cat >> ${libobj}T <> ${libobj}T </dev/null`" != "X$srcfile"; then +- $echo "\ ++ $ECHO "\ + *** ERROR, $lockfile contains: + `cat $lockfile 2>/dev/null` + +@@ -1050,5458 +1419,6252 @@ + avoid parallel builds (make -j) in this platform, or get a better + compiler." + +- $run $rm $removelist ++ $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed + if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then +- $show "$mv $output_obj $obj" +- if $run $mv $output_obj $obj; then : +- else +- error=$? +- $run $rm $removelist +- exit $error +- fi ++ func_show_eval '$MV "$output_obj" "$obj"' \ ++ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi +- +- # Append the name of the non-PIC object the libtool object file. +- # Only append if the libtool object file exists. +- test -z "$run" && cat >> ${libobj}T <> ${libobj}T <&2 +- fi +- if test -n "$link_static_flag"; then +- dlopen_self=$dlopen_self_static +- fi +- prefer_static_libs=yes +- ;; +- -static) +- if test -z "$pic_flag" && test -n "$link_static_flag"; then +- dlopen_self=$dlopen_self_static +- fi +- prefer_static_libs=built +- ;; +- -static-libtool-libs) +- if test -z "$pic_flag" && test -n "$link_static_flag"; then +- dlopen_self=$dlopen_self_static +- fi +- prefer_static_libs=yes +- ;; +- esac +- build_libtool_libs=no +- build_old_libs=yes +- break +- ;; +- esac +- done ++If FILE is a libtool library, object or program, all the files associated ++with it are deleted. Otherwise, only FILE itself is deleted using RM." ++ ;; + +- # See if our shared archives depend on static archives. +- test -n "$old_archive_from_new_cmds" && build_old_libs=yes ++ compile) ++ $ECHO \ ++"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE + +- # Go through the arguments, transforming them on the way. +- while test "$#" -gt 0; do +- arg="$1" +- shift +- case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test +- ;; +- *) qarg=$arg ;; +- esac +- libtool_args="$libtool_args $qarg" ++Compile a source file into a libtool library object. + +- # If the previous option needs an argument, assign it. +- if test -n "$prev"; then +- case $prev in +- output) +- compile_command="$compile_command @OUTPUT@" +- finalize_command="$finalize_command @OUTPUT@" +- ;; +- esac ++This mode accepts the following additional options: + +- case $prev in +- dlfiles|dlprefiles) +- if test "$preload" = no; then +- # Add the symbol object into the linking commands. +- compile_command="$compile_command @SYMFILE@" +- finalize_command="$finalize_command @SYMFILE@" +- preload=yes +- fi +- case $arg in +- *.la | *.lo) ;; # We handle these cases below. +- force) +- if test "$dlself" = no; then +- dlself=needless +- export_dynamic=yes +- fi +- prev= +- continue +- ;; +- self) +- if test "$prev" = dlprefiles; then +- dlself=yes +- elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then +- dlself=yes +- else +- dlself=needless +- export_dynamic=yes +- fi +- prev= +- continue +- ;; +- *) +- if test "$prev" = dlfiles; then +- dlfiles="$dlfiles $arg" +- else +- dlprefiles="$dlprefiles $arg" +- fi +- prev= +- continue +- ;; +- esac +- ;; +- expsyms) +- export_symbols="$arg" +- if test ! -f "$arg"; then +- $echo "$modename: symbol file \`$arg' does not exist" +- exit $EXIT_FAILURE +- fi +- prev= +- continue +- ;; +- expsyms_regex) +- export_symbols_regex="$arg" +- prev= +- continue +- ;; +- inst_prefix) +- inst_prefix_dir="$arg" +- prev= +- continue +- ;; +- precious_regex) +- precious_files_regex="$arg" +- prev= +- continue +- ;; +- release) +- release="-$arg" +- prev= +- continue +- ;; +- objectlist) +- if test -f "$arg"; then +- save_arg=$arg +- moreargs= +- for fil in `cat $save_arg` +- do +-# moreargs="$moreargs $fil" +- arg=$fil +- # A libtool-controlled object. ++ -o OUTPUT-FILE set the output file name to OUTPUT-FILE ++ -no-suppress do not suppress compiler output for multiple passes ++ -prefer-pic try to building PIC objects only ++ -prefer-non-pic try to building non-PIC objects only ++ -shared do not build a \`.o' file suitable for static linking ++ -static only build a \`.o' file suitable for static linking + +- # Check to see that this really is a libtool object. +- if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then +- pic_object= +- non_pic_object= ++COMPILE-COMMAND is a command to be used in creating a \`standard' object file ++from the given SOURCEFILE. + +- # Read the .lo file +- # If there is no directory component, then add one. +- case $arg in +- */* | *\\*) . $arg ;; +- *) . ./$arg ;; +- esac ++The output file name is determined by removing the directory component from ++SOURCEFILE, then substituting the C source code suffix \`.c' with the ++library object suffix, \`.lo'." ++ ;; + +- if test -z "$pic_object" || \ +- test -z "$non_pic_object" || +- test "$pic_object" = none && \ +- test "$non_pic_object" = none; then +- $echo "$modename: cannot find name of object for \`$arg'" 1>&2 +- exit $EXIT_FAILURE +- fi ++ execute) ++ $ECHO \ ++"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... + +- # Extract subdirectory from the argument. +- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$xdir" = "X$arg"; then +- xdir= +- else +- xdir="$xdir/" +- fi ++Automatically set library path, then run a program. + +- if test "$pic_object" != none; then +- # Prepend the subdirectory the object is found in. +- pic_object="$xdir$pic_object" ++This mode accepts the following additional options: + +- if test "$prev" = dlfiles; then +- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then +- dlfiles="$dlfiles $pic_object" +- prev= +- continue +- else +- # If libtool objects are unsupported, then we need to preload. +- prev=dlprefiles +- fi +- fi ++ -dlopen FILE add the directory containing FILE to the library path + +- # CHECK ME: I think I busted this. -Ossama +- if test "$prev" = dlprefiles; then +- # Preload the old-style object. +- dlprefiles="$dlprefiles $pic_object" +- prev= +- fi ++This mode sets the library path environment variable according to \`-dlopen' ++flags. + +- # A PIC object. +- libobjs="$libobjs $pic_object" +- arg="$pic_object" +- fi ++If any of the ARGS are libtool executable wrappers, then they are translated ++into their corresponding uninstalled binary, and any of their required library ++directories are added to the library path. + +- # Non-PIC object. +- if test "$non_pic_object" != none; then +- # Prepend the subdirectory the object is found in. +- non_pic_object="$xdir$non_pic_object" ++Then, COMMAND is executed, with ARGS as arguments." ++ ;; + +- # A standard non-PIC object +- non_pic_objects="$non_pic_objects $non_pic_object" +- if test -z "$pic_object" || test "$pic_object" = none ; then +- arg="$non_pic_object" +- fi +- else +- # If the PIC object exists, use it instead. +- # $xdir was prepended to $pic_object above. +- non_pic_object="$pic_object" +- non_pic_objects="$non_pic_objects $non_pic_object" +- fi +- else +- # Only an error if not doing a dry-run. +- if test -z "$run"; then +- $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 +- exit $EXIT_FAILURE +- else +- # Dry-run case. ++ finish) ++ $ECHO \ ++"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... + +- # Extract subdirectory from the argument. +- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$xdir" = "X$arg"; then +- xdir= +- else +- xdir="$xdir/" +- fi ++Complete the installation of libtool libraries. + +- pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` +- non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` +- libobjs="$libobjs $pic_object" +- non_pic_objects="$non_pic_objects $non_pic_object" +- fi +- fi +- done +- else +- $echo "$modename: link input file \`$save_arg' does not exist" +- exit $EXIT_FAILURE +- fi +- arg=$save_arg +- prev= +- continue +- ;; +- rpath | xrpath) +- # We need an absolute path. +- case $arg in +- [\\/]* | [A-Za-z]:[\\/]*) ;; +- *) +- $echo "$modename: only absolute run-paths are allowed" 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac +- if test "$prev" = rpath; then +- case "$rpath " in +- *" $arg "*) ;; +- *) rpath="$rpath $arg" ;; +- esac +- else +- case "$xrpath " in +- *" $arg "*) ;; +- *) xrpath="$xrpath $arg" ;; +- esac +- fi +- prev= +- continue +- ;; +- xcompiler) +- compiler_flags="$compiler_flags $qarg" +- prev= +- compile_command="$compile_command $qarg" +- finalize_command="$finalize_command $qarg" +- continue +- ;; +- xlinker) +- linker_flags="$linker_flags $qarg" +- compiler_flags="$compiler_flags $wl$qarg" +- prev= +- compile_command="$compile_command $wl$qarg" +- finalize_command="$finalize_command $wl$qarg" +- continue +- ;; +- xcclinker) +- linker_flags="$linker_flags $qarg" +- compiler_flags="$compiler_flags $qarg" +- prev= +- compile_command="$compile_command $qarg" +- finalize_command="$finalize_command $qarg" +- continue +- ;; +- shrext) +- shrext_cmds="$arg" +- prev= +- continue +- ;; +- darwin_framework|darwin_framework_skip) +- test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg" +- compile_command="$compile_command $arg" +- finalize_command="$finalize_command $arg" +- prev= +- continue +- ;; +- *) +- eval "$prev=\"\$arg\"" +- prev= +- continue +- ;; +- esac +- fi # test -n "$prev" +- +- prevarg="$arg" ++Each LIBDIR is a directory that contains libtool libraries. + +- case $arg in +- -all-static) +- if test -n "$link_static_flag"; then +- compile_command="$compile_command $link_static_flag" +- finalize_command="$finalize_command $link_static_flag" +- fi +- continue +- ;; ++The commands that this mode executes may require superuser privileges. Use ++the \`--dry-run' option if you just want to see what would be executed." ++ ;; + +- -allow-undefined) +- # FIXME: remove this flag sometime in the future. +- $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 +- continue +- ;; ++ install) ++ $ECHO \ ++"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... + +- -avoid-version) +- avoid_version=yes +- continue +- ;; ++Install executables or libraries. + +- -dlopen) +- prev=dlfiles +- continue +- ;; ++INSTALL-COMMAND is the installation command. The first component should be ++either the \`install' or \`cp' program. + +- -dlpreopen) +- prev=dlprefiles +- continue +- ;; ++The following components of INSTALL-COMMAND are treated specially: + +- -export-dynamic) +- export_dynamic=yes +- continue +- ;; ++ -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation + +- -export-symbols | -export-symbols-regex) +- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then +- $echo "$modename: more than one -exported-symbols argument is not allowed" +- exit $EXIT_FAILURE +- fi +- if test "X$arg" = "X-export-symbols"; then +- prev=expsyms +- else +- prev=expsyms_regex +- fi +- continue +- ;; ++The rest of the components are interpreted as arguments to that command (only ++BSD-compatible install options are recognized)." ++ ;; + +- -framework|-arch|-isysroot) +- case " $CC " in +- *" ${arg} ${1} "* | *" ${arg} ${1} "*) +- prev=darwin_framework_skip ;; +- *) compiler_flags="$compiler_flags $arg" +- prev=darwin_framework ;; +- esac +- compile_command="$compile_command $arg" +- finalize_command="$finalize_command $arg" +- continue +- ;; ++ link) ++ $ECHO \ ++"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... + +- -inst-prefix-dir) +- prev=inst_prefix +- continue +- ;; ++Link object files or libraries together to form another library, or to ++create an executable program. + +- # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* +- # so, if we see these flags be careful not to treat them like -L +- -L[A-Z][A-Z]*:*) +- case $with_gcc/$host in +- no/*-*-irix* | /*-*-irix*) +- compile_command="$compile_command $arg" +- finalize_command="$finalize_command $arg" +- ;; +- esac +- continue +- ;; ++LINK-COMMAND is a command using the C compiler that you would use to create ++a program from several object files. + +- -L*) +- dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` +- # We need an absolute path. +- case $dir in +- [\\/]* | [A-Za-z]:[\\/]*) ;; +- *) +- absdir=`cd "$dir" && pwd` +- if test -z "$absdir"; then +- $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 +- absdir="$dir" +- notinst_path="$notinst_path $dir" +- fi +- dir="$absdir" +- ;; +- esac +- case "$deplibs " in +- *" -L$dir "*) ;; +- *) +- deplibs="$deplibs -L$dir" +- lib_search_path="$lib_search_path $dir" +- ;; +- esac +- case $host in +- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) +- testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'` +- case :$dllsearchpath: in +- *":$dir:"*) ;; +- *) dllsearchpath="$dllsearchpath:$dir";; +- esac +- case :$dllsearchpath: in +- *":$testbindir:"*) ;; +- *) dllsearchpath="$dllsearchpath:$testbindir";; +- esac +- ;; +- esac +- continue +- ;; ++The following components of LINK-COMMAND are treated specially: + +- -l*) +- if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then +- case $host in +- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*) +- # These systems don't actually have a C or math library (as such) +- continue +- ;; +- *-*-os2*) +- # These systems don't actually have a C library (as such) +- test "X$arg" = "X-lc" && continue +- ;; +- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) +- # Do not include libc due to us having libc/libc_r. +- test "X$arg" = "X-lc" && continue +- ;; +- *-*-rhapsody* | *-*-darwin1.[012]) +- # Rhapsody C and math libraries are in the System framework +- deplibs="$deplibs -framework System" +- continue +- ;; +- *-*-sco3.2v5* | *-*-sco5v6*) +- # Causes problems with __ctype +- test "X$arg" = "X-lc" && continue +- ;; +- *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) +- # Compiler inserts libc in the correct place for threads to work +- test "X$arg" = "X-lc" && continue +- ;; +- esac +- elif test "X$arg" = "X-lc_r"; then +- case $host in +- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) +- # Do not include libc_r directly, use -pthread flag. +- continue +- ;; +- esac +- fi +- deplibs="$deplibs $arg" +- continue +- ;; ++ -all-static do not do any dynamic linking at all ++ -avoid-version do not add a version suffix if possible ++ -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime ++ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols ++ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) ++ -export-symbols SYMFILE ++ try to export only the symbols listed in SYMFILE ++ -export-symbols-regex REGEX ++ try to export only the symbols matching REGEX ++ -LLIBDIR search LIBDIR for required installed libraries ++ -lNAME OUTPUT-FILE requires the installed library libNAME ++ -module build a library that can dlopened ++ -no-fast-install disable the fast-install mode ++ -no-install link a not-installable executable ++ -no-undefined declare that a library does not refer to external symbols ++ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects ++ -objectlist FILE Use a list of object files found in FILE to specify objects ++ -precious-files-regex REGEX ++ don't remove output files matching REGEX ++ -release RELEASE specify package release information ++ -rpath LIBDIR the created library will eventually be installed in LIBDIR ++ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries ++ -shared only do dynamic linking of libtool libraries ++ -shrext SUFFIX override the standard shared library file extension ++ -static do not do any dynamic linking of uninstalled libtool libraries ++ -static-libtool-libs ++ do not do any dynamic linking of libtool libraries ++ -version-info CURRENT[:REVISION[:AGE]] ++ specify library version info [each variable defaults to 0] ++ -weak LIBNAME declare that the target provides the LIBNAME interface + +- # Tru64 UNIX uses -model [arg] to determine the layout of C++ +- # classes, name mangling, and exception handling. +- -model) +- compile_command="$compile_command $arg" +- compiler_flags="$compiler_flags $arg" +- finalize_command="$finalize_command $arg" +- prev=xcompiler +- continue +- ;; ++All other options (arguments beginning with \`-') are ignored. + +- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) +- compiler_flags="$compiler_flags $arg" +- compile_command="$compile_command $arg" +- finalize_command="$finalize_command $arg" +- continue +- ;; ++Every other argument is treated as a filename. Files ending in \`.la' are ++treated as uninstalled libtool libraries, other files are standard or library ++object files. + +- -module) +- module=yes +- continue +- ;; ++If the OUTPUT-FILE ends in \`.la', then a libtool library is created, ++only library objects (\`.lo' files) may be specified, and \`-rpath' is ++required, except when creating a convenience library. + +- # -64, -mips[0-9] enable 64-bit mode on the SGI compiler +- # -r[0-9][0-9]* specifies the processor on the SGI compiler +- # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler +- # +DA*, +DD* enable 64-bit mode on the HP compiler +- # -q* pass through compiler args for the IBM compiler +- # -m* pass through architecture-specific compiler args for GCC +- # -m*, -t[45]*, -txscale* pass through architecture-specific +- # compiler args for GCC +- # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC +- # -F/path gives path to uninstalled frameworks, gcc on darwin +- # @file GCC response files +- -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ +- -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) ++If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created ++using \`ar' and \`ranlib', or on Windows using \`lib'. + +- # Unknown arguments in both finalize_command and compile_command need +- # to be aesthetically quoted because they are evaled later. +- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` +- case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac +- compile_command="$compile_command $arg" +- finalize_command="$finalize_command $arg" +- compiler_flags="$compiler_flags $arg" +- continue ++If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file ++is created, otherwise an executable program is created." + ;; + +- -shrext) +- prev=shrext +- continue +- ;; ++ uninstall) ++ $ECHO \ ++"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... + +- -no-fast-install) +- fast_install=no +- continue +- ;; ++Remove libraries from an installation directory. + +- -no-install) +- case $host in +- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*) +- # The PATH hackery in wrapper scripts is required on Windows +- # and Darwin in order for the loader to find any dlls it needs. +- $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 +- $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 +- fast_install=no +- ;; +- *) no_install=yes ;; +- esac +- continue +- ;; ++RM is the name of the program to use to delete files associated with each FILE ++(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed ++to RM. + +- -no-undefined) +- allow_undefined=no +- continue +- ;; ++If FILE is a libtool library, all the files associated with it are deleted. ++Otherwise, only FILE itself is deleted using RM." ++ ;; + +- -objectlist) +- prev=objectlist +- continue +- ;; ++ *) ++ func_fatal_help "invalid operation mode \`$mode'" ++ ;; ++ esac + +- -o) prev=output ;; ++ $ECHO ++ $ECHO "Try \`$progname --help' for more information about other modes." + +- -precious-files-regex) +- prev=precious_regex +- continue +- ;; +- +- -release) +- prev=release +- continue +- ;; ++ exit $? ++} + +- -rpath) +- prev=rpath +- continue +- ;; ++ # Now that we've collected a possible --mode arg, show help if necessary ++ $opt_help && func_mode_help + +- -R) +- prev=xrpath +- continue +- ;; + +- -R*) +- dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` +- # We need an absolute path. +- case $dir in +- [\\/]* | [A-Za-z]:[\\/]*) ;; +- *) +- $echo "$modename: only absolute run-paths are allowed" 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac +- case "$xrpath " in +- *" $dir "*) ;; +- *) xrpath="$xrpath $dir" ;; +- esac +- continue +- ;; ++# func_mode_execute arg... ++func_mode_execute () ++{ ++ $opt_debug ++ # The first argument is the command name. ++ cmd="$nonopt" ++ test -z "$cmd" && \ ++ func_fatal_help "you must specify a COMMAND" + +- -static | -static-libtool-libs) +- # The effects of -static are defined in a previous loop. +- # We used to do the same as -all-static on platforms that +- # didn't have a PIC flag, but the assumption that the effects +- # would be equivalent was wrong. It would break on at least +- # Digital Unix and AIX. +- continue +- ;; ++ # Handle -dlopen flags immediately. ++ for file in $execute_dlfiles; do ++ test -f "$file" \ ++ || func_fatal_help "\`$file' is not a file" + +- -thread-safe) +- thread_safe=yes +- continue +- ;; ++ dir= ++ case $file in ++ *.la) ++ # Check to see that this really is a libtool archive. ++ func_lalib_unsafe_p "$file" \ ++ || func_fatal_help "\`$lib' is not a valid libtool archive" + +- -version-info) +- prev=vinfo +- continue +- ;; +- -version-number) +- prev=vinfo +- vinfo_number=yes +- continue +- ;; ++ # Read the libtool library. ++ dlname= ++ library_names= ++ func_source "$file" + +- -Wc,*) +- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` +- arg= +- save_ifs="$IFS"; IFS=',' +- for flag in $args; do +- IFS="$save_ifs" +- case $flag in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- flag="\"$flag\"" +- ;; +- esac +- arg="$arg $wl$flag" +- compiler_flags="$compiler_flags $flag" +- done +- IFS="$save_ifs" +- arg=`$echo "X$arg" | $Xsed -e "s/^ //"` +- ;; ++ # Skip this library if it cannot be dlopened. ++ if test -z "$dlname"; then ++ # Warn if it was a shared library. ++ test -n "$library_names" && \ ++ func_warning "\`$file' was not linked with \`-export-dynamic'" ++ continue ++ fi + +- -Wl,*) +- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` +- arg= +- save_ifs="$IFS"; IFS=',' +- for flag in $args; do +- IFS="$save_ifs" +- case $flag in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- flag="\"$flag\"" +- ;; +- esac +- arg="$arg $wl$flag" +- compiler_flags="$compiler_flags $wl$flag" +- linker_flags="$linker_flags $flag" +- done +- IFS="$save_ifs" +- arg=`$echo "X$arg" | $Xsed -e "s/^ //"` +- ;; ++ func_dirname "$file" "" "." ++ dir="$func_dirname_result" + +- -Xcompiler) +- prev=xcompiler +- continue ++ if test -f "$dir/$objdir/$dlname"; then ++ dir="$dir/$objdir" ++ else ++ if test ! -f "$dir/$dlname"; then ++ func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" ++ fi ++ fi + ;; + +- -Xlinker) +- prev=xlinker +- continue ++ *.lo) ++ # Just add the directory containing the .lo file. ++ func_dirname "$file" "" "." ++ dir="$func_dirname_result" + ;; + +- -XCClinker) +- prev=xcclinker ++ *) ++ func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" + continue + ;; ++ esac + +- # Some other compiler flag. +- -* | +*) +- # Unknown arguments in both finalize_command and compile_command need +- # to be aesthetically quoted because they are evaled later. +- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` +- case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac +- ;; +- +- *.$objext) +- # A standard object. +- objs="$objs $arg" +- ;; +- +- *.lo) +- # A libtool-controlled object. +- +- # Check to see that this really is a libtool object. +- if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then +- pic_object= +- non_pic_object= ++ # Get the absolute pathname. ++ absdir=`cd "$dir" && pwd` ++ test -n "$absdir" && dir="$absdir" + +- # Read the .lo file +- # If there is no directory component, then add one. +- case $arg in +- */* | *\\*) . $arg ;; +- *) . ./$arg ;; +- esac ++ # Now add the directory to shlibpath_var. ++ if eval "test -z \"\$$shlibpath_var\""; then ++ eval "$shlibpath_var=\"\$dir\"" ++ else ++ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" ++ fi ++ done + +- if test -z "$pic_object" || \ +- test -z "$non_pic_object" || +- test "$pic_object" = none && \ +- test "$non_pic_object" = none; then +- $echo "$modename: cannot find name of object for \`$arg'" 1>&2 +- exit $EXIT_FAILURE +- fi ++ # This variable tells wrapper scripts just to set shlibpath_var ++ # rather than running their programs. ++ libtool_execute_magic="$magic" + +- # Extract subdirectory from the argument. +- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$xdir" = "X$arg"; then +- xdir= +- else +- xdir="$xdir/" +- fi ++ # Check if any of the arguments is a wrapper script. ++ args= ++ for file ++ do ++ case $file in ++ -*) ;; ++ *) ++ # Do a test to see if this is really a libtool program. ++ if func_ltwrapper_script_p "$file"; then ++ func_source "$file" ++ # Transform arg to wrapped name. ++ file="$progdir/$program" ++ elif func_ltwrapper_executable_p "$file"; then ++ func_ltwrapper_scriptname "$file" ++ func_source "$func_ltwrapper_scriptname_result" ++ # Transform arg to wrapped name. ++ file="$progdir/$program" ++ fi ++ ;; ++ esac ++ # Quote arguments (to preserve shell metacharacters). ++ func_quote_for_eval "$file" ++ args="$args $func_quote_for_eval_result" ++ done + +- if test "$pic_object" != none; then +- # Prepend the subdirectory the object is found in. +- pic_object="$xdir$pic_object" ++ if test "X$opt_dry_run" = Xfalse; then ++ if test -n "$shlibpath_var"; then ++ # Export the shlibpath_var. ++ eval "export $shlibpath_var" ++ fi + +- if test "$prev" = dlfiles; then +- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then +- dlfiles="$dlfiles $pic_object" +- prev= +- continue ++ # Restore saved environment variables ++ for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES ++ do ++ eval "if test \"\${save_$lt_var+set}\" = set; then ++ $lt_var=\$save_$lt_var; export $lt_var + else +- # If libtool objects are unsupported, then we need to preload. +- prev=dlprefiles +- fi +- fi ++ $lt_unset $lt_var ++ fi" ++ done + +- # CHECK ME: I think I busted this. -Ossama +- if test "$prev" = dlprefiles; then +- # Preload the old-style object. +- dlprefiles="$dlprefiles $pic_object" +- prev= +- fi ++ # Now prepare to actually exec the command. ++ exec_cmd="\$cmd$args" ++ else ++ # Display what would be done. ++ if test -n "$shlibpath_var"; then ++ eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" ++ $ECHO "export $shlibpath_var" ++ fi ++ $ECHO "$cmd$args" ++ exit $EXIT_SUCCESS ++ fi ++} + +- # A PIC object. +- libobjs="$libobjs $pic_object" +- arg="$pic_object" +- fi ++test "$mode" = execute && func_mode_execute ${1+"$@"} + +- # Non-PIC object. +- if test "$non_pic_object" != none; then +- # Prepend the subdirectory the object is found in. +- non_pic_object="$xdir$non_pic_object" + +- # A standard non-PIC object +- non_pic_objects="$non_pic_objects $non_pic_object" +- if test -z "$pic_object" || test "$pic_object" = none ; then +- arg="$non_pic_object" +- fi +- else +- # If the PIC object exists, use it instead. +- # $xdir was prepended to $pic_object above. +- non_pic_object="$pic_object" +- non_pic_objects="$non_pic_objects $non_pic_object" +- fi +- else +- # Only an error if not doing a dry-run. +- if test -z "$run"; then +- $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 +- exit $EXIT_FAILURE +- else +- # Dry-run case. ++# func_mode_finish arg... ++func_mode_finish () ++{ ++ $opt_debug ++ libdirs="$nonopt" ++ admincmds= + +- # Extract subdirectory from the argument. +- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$xdir" = "X$arg"; then +- xdir= +- else +- xdir="$xdir/" +- fi ++ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then ++ for dir ++ do ++ libdirs="$libdirs $dir" ++ done + +- pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` +- non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` +- libobjs="$libobjs $pic_object" +- non_pic_objects="$non_pic_objects $non_pic_object" +- fi ++ for libdir in $libdirs; do ++ if test -n "$finish_cmds"; then ++ # Do each command in the finish commands. ++ func_execute_cmds "$finish_cmds" 'admincmds="$admincmds ++'"$cmd"'"' + fi +- ;; +- +- *.$libext) +- # An archive. +- deplibs="$deplibs $arg" +- old_deplibs="$old_deplibs $arg" +- continue +- ;; ++ if test -n "$finish_eval"; then ++ # Do the single finish_eval. ++ eval cmds=\"$finish_eval\" ++ $opt_dry_run || eval "$cmds" || admincmds="$admincmds ++ $cmds" ++ fi ++ done ++ fi + +- *.la) +- # A libtool-controlled library. ++ # Exit here if they wanted silent mode. ++ $opt_silent && exit $EXIT_SUCCESS + +- if test "$prev" = dlfiles; then +- # This library was specified with -dlopen. +- dlfiles="$dlfiles $arg" +- prev= +- elif test "$prev" = dlprefiles; then +- # The library was specified with -dlpreopen. +- dlprefiles="$dlprefiles $arg" ++ $ECHO "X----------------------------------------------------------------------" | $Xsed ++ $ECHO "Libraries have been installed in:" ++ for libdir in $libdirs; do ++ $ECHO " $libdir" ++ done ++ $ECHO ++ $ECHO "If you ever happen to want to link against installed libraries" ++ $ECHO "in a given directory, LIBDIR, you must either use libtool, and" ++ $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'" ++ $ECHO "flag during linking and do at least one of the following:" ++ if test -n "$shlibpath_var"; then ++ $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable" ++ $ECHO " during execution" ++ fi ++ if test -n "$runpath_var"; then ++ $ECHO " - add LIBDIR to the \`$runpath_var' environment variable" ++ $ECHO " during linking" ++ fi ++ if test -n "$hardcode_libdir_flag_spec"; then ++ libdir=LIBDIR ++ eval flag=\"$hardcode_libdir_flag_spec\" ++ ++ $ECHO " - use the \`$flag' linker flag" ++ fi ++ if test -n "$admincmds"; then ++ $ECHO " - have your system administrator run these commands:$admincmds" ++ fi ++ if test -f /etc/ld.so.conf; then ++ $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" ++ fi ++ $ECHO ++ ++ $ECHO "See any operating system documentation about shared libraries for" ++ case $host in ++ solaris2.[6789]|solaris2.1[0-9]) ++ $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual" ++ $ECHO "pages." ++ ;; ++ *) ++ $ECHO "more information, such as the ld(1) and ld.so(8) manual pages." ++ ;; ++ esac ++ $ECHO "X----------------------------------------------------------------------" | $Xsed ++ exit $EXIT_SUCCESS ++} ++ ++test "$mode" = finish && func_mode_finish ${1+"$@"} ++ ++ ++# func_mode_install arg... ++func_mode_install () ++{ ++ $opt_debug ++ # There may be an optional sh(1) argument at the beginning of ++ # install_prog (especially on Windows NT). ++ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || ++ # Allow the use of GNU shtool's install command. ++ $ECHO "X$nonopt" | $GREP shtool >/dev/null; then ++ # Aesthetically quote it. ++ func_quote_for_eval "$nonopt" ++ install_prog="$func_quote_for_eval_result " ++ arg=$1 ++ shift ++ else ++ install_prog= ++ arg=$nonopt ++ fi ++ ++ # The real first argument should be the name of the installation program. ++ # Aesthetically quote it. ++ func_quote_for_eval "$arg" ++ install_prog="$install_prog$func_quote_for_eval_result" ++ ++ # We need to accept at least all the BSD install flags. ++ dest= ++ files= ++ opts= ++ prev= ++ install_type= ++ isdir=no ++ stripme= ++ for arg ++ do ++ if test -n "$dest"; then ++ files="$files $dest" ++ dest=$arg ++ continue ++ fi ++ ++ case $arg in ++ -d) isdir=yes ;; ++ -f) ++ case " $install_prog " in ++ *[\\\ /]cp\ *) ;; ++ *) prev=$arg ;; ++ esac ++ ;; ++ -g | -m | -o) ++ prev=$arg ++ ;; ++ -s) ++ stripme=" -s" ++ continue ++ ;; ++ -*) ++ ;; ++ *) ++ # If the previous option needed an argument, then skip it. ++ if test -n "$prev"; then + prev= + else +- deplibs="$deplibs $arg" ++ dest=$arg ++ continue + fi +- continue + ;; ++ esac + +- # Some other compiler argument. +- *) +- # Unknown arguments in both finalize_command and compile_command need +- # to be aesthetically quoted because they are evaled later. +- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` +- case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac +- ;; +- esac # arg ++ # Aesthetically quote the argument. ++ func_quote_for_eval "$arg" ++ install_prog="$install_prog $func_quote_for_eval_result" ++ done + +- # Now actually substitute the argument into the commands. +- if test -n "$arg"; then +- compile_command="$compile_command $arg" +- finalize_command="$finalize_command $arg" +- fi +- done # argument parsing loop ++ test -z "$install_prog" && \ ++ func_fatal_help "you must specify an install program" + +- if test -n "$prev"; then +- $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- fi ++ test -n "$prev" && \ ++ func_fatal_help "the \`$prev' option requires an argument" + +- if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then +- eval arg=\"$export_dynamic_flag_spec\" +- compile_command="$compile_command $arg" +- finalize_command="$finalize_command $arg" ++ if test -z "$files"; then ++ if test -z "$dest"; then ++ func_fatal_help "no file or destination specified" ++ else ++ func_fatal_help "you must specify a destination" ++ fi + fi + +- oldlibs= +- # calculate the name of the file, without its directory +- outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` +- libobjs_save="$libobjs" ++ # Strip any trailing slash from the destination. ++ func_stripname '' '/' "$dest" ++ dest=$func_stripname_result + +- if test -n "$shlibpath_var"; then +- # get the directories listed in $shlibpath_var +- eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` ++ # Check to see that the destination is a directory. ++ test -d "$dest" && isdir=yes ++ if test "$isdir" = yes; then ++ destdir="$dest" ++ destname= + else +- shlib_search_path= +- fi +- eval sys_lib_search_path=\"$sys_lib_search_path_spec\" +- eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" ++ func_dirname_and_basename "$dest" "" "." ++ destdir="$func_dirname_result" ++ destname="$func_basename_result" + +- output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$output_objdir" = "X$output"; then +- output_objdir="$objdir" +- else +- output_objdir="$output_objdir/$objdir" +- fi +- # Create the object directory. +- if test ! -d "$output_objdir"; then +- $show "$mkdir $output_objdir" +- $run $mkdir $output_objdir +- exit_status=$? +- if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then +- exit $exit_status +- fi ++ # Not a directory, so check to see that there is only one file specified. ++ set dummy $files; shift ++ test "$#" -gt 1 && \ ++ func_fatal_help "\`$dest' is not a directory" + fi +- +- # Determine the type of output +- case $output in +- "") +- $echo "$modename: you must specify an output file" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- ;; +- *.$libext) linkmode=oldlib ;; +- *.lo | *.$objext) linkmode=obj ;; +- *.la) linkmode=lib ;; +- *) linkmode=prog ;; # Anything else should be a program. +- esac +- +- case $host in +- *cygwin* | *mingw* | *pw32*) +- # don't eliminate duplications in $postdeps and $predeps +- duplicate_compiler_generated_deps=yes +- ;; ++ case $destdir in ++ [\\/]* | [A-Za-z]:[\\/]*) ;; + *) +- duplicate_compiler_generated_deps=$duplicate_deps ++ for file in $files; do ++ case $file in ++ *.lo) ;; ++ *) ++ func_fatal_help "\`$destdir' must be an absolute directory name" ++ ;; ++ esac ++ done + ;; + esac +- specialdeplibs= + +- libs= +- # Find all interdependent deplibs by searching for libraries +- # that are linked more than once (e.g. -la -lb -la) +- for deplib in $deplibs; do +- if test "X$duplicate_deps" = "Xyes" ; then +- case "$libs " in +- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; +- esac +- fi +- libs="$libs $deplib" +- done ++ # This variable tells wrapper scripts just to set variables rather ++ # than running their programs. ++ libtool_install_magic="$magic" + +- if test "$linkmode" = lib; then +- libs="$predeps $libs $compiler_lib_search_path $postdeps" ++ staticlibs= ++ future_libdirs= ++ current_libdirs= ++ for file in $files; do + +- # Compute libraries that are listed more than once in $predeps +- # $postdeps and mark them as special (i.e., whose duplicates are +- # not to be eliminated). +- pre_post_deps= +- if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then +- for pre_post_dep in $predeps $postdeps; do +- case "$pre_post_deps " in +- *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; ++ # Do each installation. ++ case $file in ++ *.$libext) ++ # Do the static libraries later. ++ staticlibs="$staticlibs $file" ++ ;; ++ ++ *.la) ++ # Check to see that this really is a libtool archive. ++ func_lalib_unsafe_p "$file" \ ++ || func_fatal_help "\`$file' is not a valid libtool archive" ++ ++ library_names= ++ old_library= ++ relink_command= ++ func_source "$file" ++ ++ # Add the libdir to current_libdirs if it is the destination. ++ if test "X$destdir" = "X$libdir"; then ++ case "$current_libdirs " in ++ *" $libdir "*) ;; ++ *) current_libdirs="$current_libdirs $libdir" ;; + esac +- pre_post_deps="$pre_post_deps $pre_post_dep" +- done +- fi +- pre_post_deps= +- fi ++ else ++ # Note the libdir as a future libdir. ++ case "$future_libdirs " in ++ *" $libdir "*) ;; ++ *) future_libdirs="$future_libdirs $libdir" ;; ++ esac ++ fi + +- deplibs= +- newdependency_libs= +- newlib_search_path= +- need_relink=no # whether we're linking any uninstalled libtool libraries +- notinst_deplibs= # not-installed libtool libraries +- case $linkmode in +- lib) +- passes="conv link" +- for file in $dlfiles $dlprefiles; do +- case $file in +- *.la) ;; +- *) +- $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 +- exit $EXIT_FAILURE ++ func_dirname "$file" "/" "" ++ dir="$func_dirname_result" ++ dir="$dir$objdir" ++ ++ if test -n "$relink_command"; then ++ # Determine the prefix the user has applied to our future dir. ++ inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"` ++ ++ # Don't allow the user to place us outside of our expected ++ # location b/c this prevents finding dependent libraries that ++ # are installed to the same prefix. ++ # At present, this check doesn't affect windows .dll's that ++ # are installed into $libdir/../bin (currently, that works fine) ++ # but it's something to keep an eye on. ++ test "$inst_prefix_dir" = "$destdir" && \ ++ func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" ++ ++ if test -n "$inst_prefix_dir"; then ++ # Stick the inst_prefix_dir data into the link command. ++ relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` ++ else ++ relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"` ++ fi ++ ++ func_warning "relinking \`$file'" ++ func_show_eval "$relink_command" \ ++ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' ++ fi ++ ++ # See the names of the shared library. ++ set dummy $library_names; shift ++ if test -n "$1"; then ++ realname="$1" ++ shift ++ ++ srcname="$realname" ++ test -n "$relink_command" && srcname="$realname"T ++ ++ # Install the shared library and build the symlinks. ++ func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \ ++ 'exit $?' ++ tstripme="$stripme" ++ case $host_os in ++ cygwin* | mingw* | pw32*) ++ case $realname in ++ *.dll.a) ++ tstripme="" ++ ;; ++ esac + ;; + esac +- done +- ;; +- prog) +- compile_deplibs= +- finalize_deplibs= +- alldeplibs=no +- newdlfiles= +- newdlprefiles= +- passes="conv scan dlopen dlpreopen link" +- ;; +- *) passes="conv" +- ;; +- esac +- for pass in $passes; do +- if test "$linkmode,$pass" = "lib,link" || +- test "$linkmode,$pass" = "prog,scan"; then +- libs="$deplibs" +- deplibs= +- fi +- if test "$linkmode" = prog; then +- case $pass in +- dlopen) libs="$dlfiles" ;; +- dlpreopen) libs="$dlprefiles" ;; +- link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; +- esac +- fi +- if test "$pass" = dlopen; then +- # Collect dlpreopened libraries +- save_deplibs="$deplibs" +- deplibs= +- fi +- for deplib in $libs; do +- lib= +- found=no +- case $deplib in +- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) +- if test "$linkmode,$pass" = "prog,link"; then +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- else +- compiler_flags="$compiler_flags $deplib" +- fi +- continue +- ;; +- -l*) +- if test "$linkmode" != lib && test "$linkmode" != prog; then +- $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 +- continue ++ if test -n "$tstripme" && test -n "$striplib"; then ++ func_show_eval "$striplib $destdir/$realname" 'exit $?' + fi +- name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` +- for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do +- for search_ext in .la $std_shrext .so .a; do +- # Search the libtool library +- lib="$searchdir/lib${name}${search_ext}" +- if test -f "$lib"; then +- if test "$search_ext" = ".la"; then +- found=yes +- else +- found=no +- fi +- break 2 +- fi ++ ++ if test "$#" -gt 0; then ++ # Delete the old symlinks, and create new ones. ++ # Try `ln -sf' first, because the `ln' binary might depend on ++ # the symlink we replace! Solaris /bin/ln does not understand -f, ++ # so we also need to try rm && ln -s. ++ for linkname ++ do ++ test "$linkname" != "$realname" \ ++ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" + done +- done +- if test "$found" != yes; then +- # deplib doesn't seem to be a libtool library +- if test "$linkmode,$pass" = "prog,link"; then +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- else +- deplibs="$deplib $deplibs" +- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" +- fi +- continue +- else # deplib is a libtool library +- # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, +- # We need to do some special things here, and not later. +- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then +- case " $predeps $postdeps " in +- *" $deplib "*) +- if (${SED} -e '2q' $lib | +- grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then +- library_names= +- old_library= +- case $lib in +- */* | *\\*) . $lib ;; +- *) . ./$lib ;; +- esac +- for l in $old_library $library_names; do +- ll="$l" +- done +- if test "X$ll" = "X$old_library" ; then # only static version available +- found=no +- ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` +- test "X$ladir" = "X$lib" && ladir="." +- lib=$ladir/$old_library +- if test "$linkmode,$pass" = "prog,link"; then +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- else +- deplibs="$deplib $deplibs" +- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" +- fi +- continue +- fi +- fi +- ;; +- *) ;; +- esac +- fi +- fi +- ;; # -l +- -L*) +- case $linkmode in +- lib) +- deplibs="$deplib $deplibs" +- test "$pass" = conv && continue +- newdependency_libs="$deplib $newdependency_libs" +- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` +- ;; +- prog) +- if test "$pass" = conv; then +- deplibs="$deplib $deplibs" +- continue +- fi +- if test "$pass" = scan; then +- deplibs="$deplib $deplibs" +- else +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- fi +- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` +- ;; +- *) +- $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 +- ;; +- esac # linkmode +- continue +- ;; # -L +- -R*) +- if test "$pass" = link; then +- dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` +- # Make sure the xrpath contains only unique directories. +- case "$xrpath " in +- *" $dir "*) ;; +- *) xrpath="$xrpath $dir" ;; +- esac + fi +- deplibs="$deplib $deplibs" +- continue +- ;; +- *.la) lib="$deplib" ;; +- *.$libext) +- if test "$pass" = conv; then +- deplibs="$deplib $deplibs" +- continue +- fi +- case $linkmode in +- lib) +- valid_a_lib=no +- case $deplibs_check_method in +- match_pattern*) +- set dummy $deplibs_check_method +- match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` +- if eval $echo \"$deplib\" 2>/dev/null \ +- | $SED 10q \ +- | $EGREP "$match_pattern_regex" > /dev/null; then +- valid_a_lib=yes +- fi +- ;; +- pass_all) +- valid_a_lib=yes +- ;; +- esac +- if test "$valid_a_lib" != yes; then +- $echo +- $echo "*** Warning: Trying to link with static lib archive $deplib." +- $echo "*** I have the capability to make that library automatically link in when" +- $echo "*** you link to this library. But I can only do this if you have a" +- $echo "*** shared version of the library, which you do not appear to have" +- $echo "*** because the file extensions .$libext of this argument makes me believe" +- $echo "*** that it is just a static archive that I should not used here." +- else +- $echo +- $echo "*** Warning: Linking the shared library $output against the" +- $echo "*** static library $deplib is not portable!" +- deplibs="$deplib $deplibs" +- fi +- continue +- ;; +- prog) +- if test "$pass" != link; then +- deplibs="$deplib $deplibs" +- else +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- fi +- continue +- ;; +- esac # linkmode +- ;; # *.$libext +- *.lo | *.$objext) +- if test "$pass" = conv; then +- deplibs="$deplib $deplibs" +- elif test "$linkmode" = prog; then +- if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then +- # If there is no dlopen support or we're linking statically, +- # we need to preload. +- newdlprefiles="$newdlprefiles $deplib" +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- else +- newdlfiles="$newdlfiles $deplib" +- fi +- fi +- continue +- ;; +- %DEPLIBS%) +- alldeplibs=yes +- continue +- ;; +- esac # case $deplib +- if test "$found" = yes || test -f "$lib"; then : +- else +- $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2 +- exit $EXIT_FAILURE +- fi + +- # Check to see that this really is a libtool archive. +- if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : +- else +- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 +- exit $EXIT_FAILURE ++ # Do each command in the postinstall commands. ++ lib="$destdir/$realname" ++ func_execute_cmds "$postinstall_cmds" 'exit $?' + fi + +- ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` +- test "X$ladir" = "X$lib" && ladir="." +- +- dlname= +- dlopen= +- dlpreopen= +- libdir= +- library_names= +- old_library= +- # If the library was installed with an old release of libtool, +- # it will not redefine variables installed, or shouldnotlink +- installed=yes +- shouldnotlink=no +- avoidtemprpath= ++ # Install the pseudo-library for information purposes. ++ func_basename "$file" ++ name="$func_basename_result" ++ instname="$dir/$name"i ++ func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' + ++ # Maybe install the static library, too. ++ test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" ++ ;; + +- # Read the .la file +- case $lib in +- */* | *\\*) . $lib ;; +- *) . ./$lib ;; +- esac ++ *.lo) ++ # Install (i.e. copy) a libtool object. + +- if test "$linkmode,$pass" = "lib,link" || +- test "$linkmode,$pass" = "prog,scan" || +- { test "$linkmode" != prog && test "$linkmode" != lib; }; then +- test -n "$dlopen" && dlfiles="$dlfiles $dlopen" +- test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" ++ # Figure out destination file name, if it wasn't already specified. ++ if test -n "$destname"; then ++ destfile="$destdir/$destname" ++ else ++ func_basename "$file" ++ destfile="$func_basename_result" ++ destfile="$destdir/$destfile" + fi + +- if test "$pass" = conv; then +- # Only check for convenience libraries +- deplibs="$lib $deplibs" +- if test -z "$libdir"; then +- if test -z "$old_library"; then +- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 +- exit $EXIT_FAILURE +- fi +- # It is a libtool convenience library, so add in its objects. +- convenience="$convenience $ladir/$objdir/$old_library" +- old_convenience="$old_convenience $ladir/$objdir/$old_library" +- tmp_libs= +- for deplib in $dependency_libs; do +- deplibs="$deplib $deplibs" +- if test "X$duplicate_deps" = "Xyes" ; then +- case "$tmp_libs " in +- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; +- esac +- fi +- tmp_libs="$tmp_libs $deplib" +- done +- elif test "$linkmode" != prog && test "$linkmode" != lib; then +- $echo "$modename: \`$lib' is not a convenience library" 1>&2 +- exit $EXIT_FAILURE +- fi +- continue +- fi # $pass = conv ++ # Deduce the name of the destination old-style object file. ++ case $destfile in ++ *.lo) ++ func_lo2o "$destfile" ++ staticdest=$func_lo2o_result ++ ;; ++ *.$objext) ++ staticdest="$destfile" ++ destfile= ++ ;; ++ *) ++ func_fatal_help "cannot copy a libtool object to \`$destfile'" ++ ;; ++ esac + ++ # Install the libtool object if requested. ++ test -n "$destfile" && \ ++ func_show_eval "$install_prog $file $destfile" 'exit $?' + +- # Get the name of the library we link against. +- linklib= +- for l in $old_library $library_names; do +- linklib="$l" +- done +- if test -z "$linklib"; then +- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 +- exit $EXIT_FAILURE ++ # Install the old object if enabled. ++ if test "$build_old_libs" = yes; then ++ # Deduce the name of the old-style object file. ++ func_lo2o "$file" ++ staticobj=$func_lo2o_result ++ func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' + fi ++ exit $EXIT_SUCCESS ++ ;; + +- # This library was specified with -dlopen. +- if test "$pass" = dlopen; then +- if test -z "$libdir"; then +- $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 +- exit $EXIT_FAILURE +- fi +- if test -z "$dlname" || +- test "$dlopen_support" != yes || +- test "$build_libtool_libs" = no; then +- # If there is no dlname, no dlopen support or we're linking +- # statically, we need to preload. We also need to preload any +- # dependent libraries so libltdl's deplib preloader doesn't +- # bomb out in the load deplibs phase. +- dlprefiles="$dlprefiles $lib $dependency_libs" +- else +- newdlfiles="$newdlfiles $lib" +- fi +- continue +- fi # $pass = dlopen ++ *) ++ # Figure out destination file name, if it wasn't already specified. ++ if test -n "$destname"; then ++ destfile="$destdir/$destname" ++ else ++ func_basename "$file" ++ destfile="$func_basename_result" ++ destfile="$destdir/$destfile" ++ fi + +- # We need an absolute path. +- case $ladir in +- [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; ++ # If the file is missing, and there is a .exe on the end, strip it ++ # because it is most likely a libtool script we actually want to ++ # install ++ stripped_ext="" ++ case $file in ++ *.exe) ++ if test ! -f "$file"; then ++ func_stripname '' '.exe' "$file" ++ file=$func_stripname_result ++ stripped_ext=".exe" ++ fi ++ ;; ++ esac ++ ++ # Do a test to see if this is really a libtool program. ++ case $host in ++ *cygwin*|*mingw*) ++ if func_ltwrapper_executable_p "$file"; then ++ func_ltwrapper_scriptname "$file" ++ wrapper=$func_ltwrapper_scriptname_result ++ else ++ func_stripname '' '.exe' "$file" ++ wrapper=$func_stripname_result ++ fi ++ ;; + *) +- abs_ladir=`cd "$ladir" && pwd` +- if test -z "$abs_ladir"; then +- $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 +- $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 +- abs_ladir="$ladir" ++ wrapper=$file ++ ;; ++ esac ++ if func_ltwrapper_script_p "$wrapper"; then ++ notinst_deplibs= ++ relink_command= ++ ++ func_source "$wrapper" ++ ++ # Check the variables that should have been set. ++ test -z "$generated_by_libtool_version" && \ ++ func_fatal_error "invalid libtool wrapper script \`$wrapper'" ++ ++ finalize=yes ++ for lib in $notinst_deplibs; do ++ # Check to see that each library is installed. ++ libdir= ++ if test -f "$lib"; then ++ func_source "$lib" ++ fi ++ libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test ++ if test -n "$libdir" && test ! -f "$libfile"; then ++ func_warning "\`$lib' has not been installed in \`$libdir'" ++ finalize=no ++ fi ++ done ++ ++ relink_command= ++ func_source "$wrapper" ++ ++ outputname= ++ if test "$fast_install" = no && test -n "$relink_command"; then ++ $opt_dry_run || { ++ if test "$finalize" = yes; then ++ tmpdir=`func_mktempdir` ++ func_basename "$file$stripped_ext" ++ file="$func_basename_result" ++ outputname="$tmpdir/$file" ++ # Replace the output file specification. ++ relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` ++ ++ $opt_silent || { ++ func_quote_for_expand "$relink_command" ++ eval "func_echo $func_quote_for_expand_result" ++ } ++ if eval "$relink_command"; then : ++ else ++ func_error "error: relink \`$file' with the above command before installing it" ++ $opt_dry_run || ${RM}r "$tmpdir" ++ continue ++ fi ++ file="$outputname" ++ else ++ func_warning "cannot relink \`$file'" ++ fi ++ } ++ else ++ # Install the binary that we compiled earlier. ++ file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` + fi ++ fi ++ ++ # remove .exe since cygwin /usr/bin/install will append another ++ # one anyway ++ case $install_prog,$host in ++ */usr/bin/install*,*cygwin*) ++ case $file:$destfile in ++ *.exe:*.exe) ++ # this is ok ++ ;; ++ *.exe:*) ++ destfile=$destfile.exe ++ ;; ++ *:*.exe) ++ func_stripname '' '.exe' "$destfile" ++ destfile=$func_stripname_result ++ ;; ++ esac + ;; + esac +- laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` ++ func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' ++ $opt_dry_run || if test -n "$outputname"; then ++ ${RM}r "$tmpdir" ++ fi ++ ;; ++ esac ++ done + +- # Find the relevant object directory and library name. +- if test "X$installed" = Xyes; then +- if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then +- $echo "$modename: warning: library \`$lib' was moved." 1>&2 +- dir="$ladir" +- absdir="$abs_ladir" +- libdir="$abs_ladir" +- else +- dir="$libdir" +- absdir="$libdir" ++ for file in $staticlibs; do ++ func_basename "$file" ++ name="$func_basename_result" ++ ++ # Set up the ranlib parameters. ++ oldlib="$destdir/$name" ++ ++ func_show_eval "$install_prog \$file \$oldlib" 'exit $?' ++ ++ if test -n "$stripme" && test -n "$old_striplib"; then ++ func_show_eval "$old_striplib $oldlib" 'exit $?' ++ fi ++ ++ # Do each command in the postinstall commands. ++ func_execute_cmds "$old_postinstall_cmds" 'exit $?' ++ done ++ ++ test -n "$future_libdirs" && \ ++ func_warning "remember to run \`$progname --finish$future_libdirs'" ++ ++ if test -n "$current_libdirs"; then ++ # Maybe just do a dry run. ++ $opt_dry_run && current_libdirs=" -n$current_libdirs" ++ exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' ++ else ++ exit $EXIT_SUCCESS ++ fi ++} ++ ++test "$mode" = install && func_mode_install ${1+"$@"} ++ ++ ++# func_generate_dlsyms outputname originator pic_p ++# Extract symbols from dlprefiles and create ${outputname}S.o with ++# a dlpreopen symbol table. ++func_generate_dlsyms () ++{ ++ $opt_debug ++ my_outputname="$1" ++ my_originator="$2" ++ my_pic_p="${3-no}" ++ my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` ++ my_dlsyms= ++ ++ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then ++ if test -n "$NM" && test -n "$global_symbol_pipe"; then ++ my_dlsyms="${my_outputname}S.c" ++ else ++ func_error "not configured to extract global symbols from dlpreopened files" ++ fi ++ fi ++ ++ if test -n "$my_dlsyms"; then ++ case $my_dlsyms in ++ "") ;; ++ *.c) ++ # Discover the nlist of each of the dlfiles. ++ nlist="$output_objdir/${my_outputname}.nm" ++ ++ func_show_eval "$RM $nlist ${nlist}S ${nlist}T" ++ ++ # Parse the name list into a source file. ++ func_verbose "creating $output_objdir/$my_dlsyms" ++ ++ $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ ++/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ ++/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ ++ ++#ifdef __cplusplus ++extern \"C\" { ++#endif ++ ++/* External symbol declarations for the compiler. */\ ++" ++ ++ if test "$dlself" = yes; then ++ func_verbose "generating symbol list for \`$output'" ++ ++ $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" ++ ++ # Add our own program objects to the symbol list. ++ progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` ++ for progfile in $progfiles; do ++ func_verbose "extracting global C symbols from \`$progfile'" ++ $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'" ++ done ++ ++ if test -n "$exclude_expsyms"; then ++ $opt_dry_run || { ++ eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' ++ eval '$MV "$nlist"T "$nlist"' ++ } + fi +- test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes +- else +- if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then +- dir="$ladir" +- absdir="$abs_ladir" +- # Remove this search path later +- notinst_path="$notinst_path $abs_ladir" ++ ++ if test -n "$export_symbols_regex"; then ++ $opt_dry_run || { ++ eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' ++ eval '$MV "$nlist"T "$nlist"' ++ } ++ fi ++ ++ # Prepare the list of exported symbols ++ if test -z "$export_symbols"; then ++ export_symbols="$output_objdir/$outputname.exp" ++ $opt_dry_run || { ++ $RM $export_symbols ++ eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' ++ case $host in ++ *cygwin* | *mingw* ) ++ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' ++ eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' ++ ;; ++ esac ++ } + else +- dir="$ladir/$objdir" +- absdir="$abs_ladir/$objdir" +- # Remove this search path later +- notinst_path="$notinst_path $abs_ladir" ++ $opt_dry_run || { ++ eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' ++ eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' ++ eval '$MV "$nlist"T "$nlist"' ++ case $host in ++ *cygwin | *mingw* ) ++ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' ++ eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' ++ ;; ++ esac ++ } + fi +- fi # $installed = yes +- name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` ++ fi + +- # This library was specified with -dlpreopen. +- if test "$pass" = dlpreopen; then +- if test -z "$libdir"; then +- $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 +- exit $EXIT_FAILURE ++ for dlprefile in $dlprefiles; do ++ func_verbose "extracting global C symbols from \`$dlprefile'" ++ func_basename "$dlprefile" ++ name="$func_basename_result" ++ $opt_dry_run || { ++ eval '$ECHO ": $name " >> "$nlist"' ++ eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'" ++ } ++ done ++ ++ $opt_dry_run || { ++ # Make sure we have at least an empty file. ++ test -f "$nlist" || : > "$nlist" ++ ++ if test -n "$exclude_expsyms"; then ++ $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T ++ $MV "$nlist"T "$nlist" + fi +- # Prefer using a static library (so that no silly _DYNAMIC symbols +- # are required to link). +- if test -n "$old_library"; then +- newdlprefiles="$newdlprefiles $dir/$old_library" +- # Otherwise, use the dlname, so that lt_dlopen finds it. +- elif test -n "$dlname"; then +- newdlprefiles="$newdlprefiles $dir/$dlname" ++ ++ # Try sorting and uniquifying the output. ++ if $GREP -v "^: " < "$nlist" | ++ if sort -k 3 /dev/null 2>&1; then ++ sort -k 3 ++ else ++ sort +2 ++ fi | ++ uniq > "$nlist"S; then ++ : + else +- newdlprefiles="$newdlprefiles $dir/$linklib" ++ $GREP -v "^: " < "$nlist" > "$nlist"S + fi +- fi # $pass = dlpreopen + +- if test -z "$libdir"; then +- # Link the convenience library +- if test "$linkmode" = lib; then +- deplibs="$dir/$old_library $deplibs" +- elif test "$linkmode,$pass" = "prog,link"; then +- compile_deplibs="$dir/$old_library $compile_deplibs" +- finalize_deplibs="$dir/$old_library $finalize_deplibs" ++ if test -f "$nlist"S; then ++ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' + else +- deplibs="$lib $deplibs" # used for prog,scan pass ++ $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms" + fi +- continue +- fi +- + +- if test "$linkmode" = prog && test "$pass" != link; then +- newlib_search_path="$newlib_search_path $ladir" +- deplibs="$lib $deplibs" ++ $ECHO >> "$output_objdir/$my_dlsyms" "\ + +- linkalldeplibs=no +- if test "$link_all_deplibs" != no || test -z "$library_names" || +- test "$build_libtool_libs" = no; then +- linkalldeplibs=yes +- fi ++/* The mapping between symbol names and symbols. */ ++typedef struct { ++ const char *name; ++ void *address; ++} lt_dlsymlist; ++" ++ case $host in ++ *cygwin* | *mingw* ) ++ $ECHO >> "$output_objdir/$my_dlsyms" "\ ++/* DATA imports from DLLs on WIN32 con't be const, because ++ runtime relocations are performed -- see ld's documentation ++ on pseudo-relocs. */" ++ lt_dlsym_const= ;; ++ *osf5*) ++ echo >> "$output_objdir/$my_dlsyms" "\ ++/* This system does not cope well with relocations in const data */" ++ lt_dlsym_const= ;; ++ *) ++ lt_dlsym_const=const ;; ++ esac + +- tmp_libs= +- for deplib in $dependency_libs; do +- case $deplib in +- -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test +- esac +- # Need to link against all dependency_libs? +- if test "$linkalldeplibs" = yes; then +- deplibs="$deplib $deplibs" +- else +- # Need to hardcode shared library paths +- # or/and link against static libraries +- newdependency_libs="$deplib $newdependency_libs" +- fi +- if test "X$duplicate_deps" = "Xyes" ; then +- case "$tmp_libs " in +- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; +- esac +- fi +- tmp_libs="$tmp_libs $deplib" +- done # for deplib +- continue +- fi # $linkmode = prog... ++ $ECHO >> "$output_objdir/$my_dlsyms" "\ ++extern $lt_dlsym_const lt_dlsymlist ++lt_${my_prefix}_LTX_preloaded_symbols[]; ++$lt_dlsym_const lt_dlsymlist ++lt_${my_prefix}_LTX_preloaded_symbols[] = ++{\ ++ { \"$my_originator\", (void *) 0 }," + +- if test "$linkmode,$pass" = "prog,link"; then +- if test -n "$library_names" && +- { { test "$prefer_static_libs" = no || +- test "$prefer_static_libs,$installed" = "built,yes"; } || +- test -z "$old_library"; }; then +- # We need to hardcode the library path +- if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then +- # Make sure the rpath contains only unique directories. +- case "$temp_rpath " in +- *" $dir "*) ;; +- *" $absdir "*) ;; +- *) temp_rpath="$temp_rpath $absdir" ;; +- esac +- fi ++ case $need_lib_prefix in ++ no) ++ eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" ++ ;; ++ *) ++ eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" ++ ;; ++ esac ++ $ECHO >> "$output_objdir/$my_dlsyms" "\ ++ {0, (void *) 0} ++}; + +- # Hardcode the library path. +- # Skip directories that are in the system default run-time +- # search path. +- case " $sys_lib_dlsearch_path " in +- *" $absdir "*) ;; +- *) +- case "$compile_rpath " in +- *" $absdir "*) ;; +- *) compile_rpath="$compile_rpath $absdir" +- esac +- ;; +- esac +- case " $sys_lib_dlsearch_path " in +- *" $libdir "*) ;; +- *) +- case "$finalize_rpath " in +- *" $libdir "*) ;; +- *) finalize_rpath="$finalize_rpath $libdir" +- esac +- ;; +- esac +- fi # $linkmode,$pass = prog,link... +- +- if test "$alldeplibs" = yes && +- { test "$deplibs_check_method" = pass_all || +- { test "$build_libtool_libs" = yes && +- test -n "$library_names"; }; }; then +- # We only need to search for static libraries +- continue +- fi +- fi ++/* This works around a problem in FreeBSD linker */ ++#ifdef FREEBSD_WORKAROUND ++static const void *lt_preloaded_setup() { ++ return lt_${my_prefix}_LTX_preloaded_symbols; ++} ++#endif + +- link_static=no # Whether the deplib will be linked statically +- use_static_libs=$prefer_static_libs +- if test "$use_static_libs" = built && test "$installed" = yes ; then +- use_static_libs=no +- fi +- if test -n "$library_names" && +- { test "$use_static_libs" = no || test -z "$old_library"; }; then +- if test "$installed" = no; then +- notinst_deplibs="$notinst_deplibs $lib" +- need_relink=yes +- fi +- # This is a shared library ++#ifdef __cplusplus ++} ++#endif\ ++" ++ } # !$opt_dry_run + +- # Warn about portability, can't link against -module's on +- # some systems (darwin) +- if test "$shouldnotlink" = yes && test "$pass" = link ; then +- $echo +- if test "$linkmode" = prog; then +- $echo "*** Warning: Linking the executable $output against the loadable module" +- else +- $echo "*** Warning: Linking the shared library $output against the loadable module" ++ pic_flag_for_symtable= ++ case "$compile_command " in ++ *" -static "*) ;; ++ *) ++ case $host in ++ # compiling the symbol table file with pic_flag works around ++ # a FreeBSD bug that causes programs to crash when -lm is ++ # linked before any other PIC object. But we must not use ++ # pic_flag when linking with -static. The problem exists in ++ # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. ++ *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) ++ pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; ++ *-*-hpux*) ++ pic_flag_for_symtable=" $pic_flag" ;; ++ *) ++ if test "X$my_pic_p" != Xno; then ++ pic_flag_for_symtable=" $pic_flag" + fi +- $echo "*** $linklib is not portable!" +- fi +- if test "$linkmode" = lib && +- test "$hardcode_into_libs" = yes; then +- # Hardcode the library path. +- # Skip directories that are in the system default run-time +- # search path. +- case " $sys_lib_dlsearch_path " in +- *" $absdir "*) ;; +- *) +- case "$compile_rpath " in +- *" $absdir "*) ;; +- *) compile_rpath="$compile_rpath $absdir" +- esac +- ;; +- esac +- case " $sys_lib_dlsearch_path " in +- *" $libdir "*) ;; +- *) +- case "$finalize_rpath " in +- *" $libdir "*) ;; +- *) finalize_rpath="$finalize_rpath $libdir" +- esac +- ;; +- esac ++ ;; ++ esac ++ ;; ++ esac ++ symtab_cflags= ++ for arg in $LTCFLAGS; do ++ case $arg in ++ -pie | -fpie | -fPIE) ;; ++ *) symtab_cflags="$symtab_cflags $arg" ;; ++ esac ++ done ++ ++ # Now compile the dynamic symbol file. ++ func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' ++ ++ # Clean up the generated files. ++ func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' ++ ++ # Transform the symbol file into the correct name. ++ symfileobj="$output_objdir/${my_outputname}S.$objext" ++ case $host in ++ *cygwin* | *mingw* ) ++ if test -f "$output_objdir/$my_outputname.def"; then ++ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` ++ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` ++ else ++ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` ++ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + fi ++ ;; ++ *) ++ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` ++ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` ++ ;; ++ esac ++ ;; ++ *) ++ func_fatal_error "unknown suffix for \`$my_dlsyms'" ++ ;; ++ esac ++ else ++ # We keep going just in case the user didn't refer to ++ # lt_preloaded_symbols. The linker will fail if global_symbol_pipe ++ # really was required. ++ ++ # Nullify the symbol file. ++ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` ++ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` ++ fi ++} + +- if test -n "$old_archive_from_expsyms_cmds"; then +- # figure out the soname +- set dummy $library_names +- realname="$2" +- shift; shift +- libname=`eval \\$echo \"$libname_spec\"` +- # use dlname if we got it. it's perfectly good, no? +- if test -n "$dlname"; then +- soname="$dlname" +- elif test -n "$soname_spec"; then +- # bleh windows +- case $host in +- *cygwin* | mingw*) +- major=`expr $current - $age` +- versuffix="-$major" +- ;; +- esac +- eval soname=\"$soname_spec\" +- else +- soname="$realname" +- fi ++# func_win32_libid arg ++# return the library type of file 'arg' ++# ++# Need a lot of goo to handle *both* DLLs and import libs ++# Has to be a shell function in order to 'eat' the argument ++# that is supplied when $file_magic_command is called. ++func_win32_libid () ++{ ++ $opt_debug ++ win32_libid_type="unknown" ++ win32_fileres=`file -L $1 2>/dev/null` ++ case $win32_fileres in ++ *ar\ archive\ import\ library*) # definitely import ++ win32_libid_type="x86 archive import" ++ ;; ++ *ar\ archive*) # could be an import, or static ++ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | ++ $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then ++ win32_nmres=`eval $NM -f posix -A $1 | ++ $SED -n -e ' ++ 1,100{ ++ / I /{ ++ s,.*,import, ++ p ++ q ++ } ++ }'` ++ case $win32_nmres in ++ import*) win32_libid_type="x86 archive import";; ++ *) win32_libid_type="x86 archive static";; ++ esac ++ fi ++ ;; ++ *DLL*) ++ win32_libid_type="x86 DLL" ++ ;; ++ *executable*) # but shell scripts are "executable" too... ++ case $win32_fileres in ++ *MS\ Windows\ PE\ Intel*) ++ win32_libid_type="x86 DLL" ++ ;; ++ esac ++ ;; ++ esac ++ $ECHO "$win32_libid_type" ++} + +- # Make a new name for the extract_expsyms_cmds to use +- soroot="$soname" +- soname=`$echo $soroot | ${SED} -e 's/^.*\///'` +- newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" + +- # If the library has no export list, then create one now +- if test -f "$output_objdir/$soname-def"; then : +- else +- $show "extracting exported symbol list from \`$soname'" +- save_ifs="$IFS"; IFS='~' +- cmds=$extract_expsyms_cmds +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done +- IFS="$save_ifs" +- fi + +- # Create $newlib +- if test -f "$output_objdir/$newlib"; then :; else +- $show "generating import library for \`$soname'" +- save_ifs="$IFS"; IFS='~' +- cmds=$old_archive_from_expsyms_cmds +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done +- IFS="$save_ifs" +- fi +- # make sure the library variables are pointing to the new library +- dir=$output_objdir +- linklib=$newlib +- fi # test -n "$old_archive_from_expsyms_cmds" ++# func_extract_an_archive dir oldlib ++func_extract_an_archive () ++{ ++ $opt_debug ++ f_ex_an_ar_dir="$1"; shift ++ f_ex_an_ar_oldlib="$1" ++ func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?' ++ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then ++ : ++ else ++ func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" ++ fi ++} + +- if test "$linkmode" = prog || test "$mode" != relink; then +- add_shlibpath= +- add_dir= +- add= +- lib_linked=yes +- case $hardcode_action in +- immediate | unsupported) +- if test "$hardcode_direct" = no; then +- add="$dir/$linklib" +- case $host in +- *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; +- *-*-sysv4*uw2*) add_dir="-L$dir" ;; +- *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ +- *-*-unixware7*) add_dir="-L$dir" ;; +- *-*-darwin* ) +- # if the lib is a module then we can not link against +- # it, someone is ignoring the new warnings I added +- if /usr/bin/file -L $add 2> /dev/null | +- $EGREP ": [^:]* bundle" >/dev/null ; then +- $echo "** Warning, lib $linklib is a module, not a shared library" +- if test -z "$old_library" ; then +- $echo +- $echo "** And there doesn't seem to be a static archive available" +- $echo "** The link will probably fail, sorry" +- else +- add="$dir/$old_library" +- fi +- fi +- esac +- elif test "$hardcode_minus_L" = no; then +- case $host in +- *-*-sunos*) add_shlibpath="$dir" ;; +- esac +- add_dir="-L$dir" +- add="-l$name" +- elif test "$hardcode_shlibpath_var" = no; then +- add_shlibpath="$dir" +- add="-l$name" +- else +- lib_linked=no +- fi +- ;; +- relink) +- if test "$hardcode_direct" = yes; then +- add="$dir/$linklib" +- elif test "$hardcode_minus_L" = yes; then +- add_dir="-L$dir" +- # Try looking first in the location we're being installed to. +- if test -n "$inst_prefix_dir"; then +- case $libdir in +- [\\/]*) +- add_dir="$add_dir -L$inst_prefix_dir$libdir" +- ;; +- esac +- fi +- add="-l$name" +- elif test "$hardcode_shlibpath_var" = yes; then +- add_shlibpath="$dir" +- add="-l$name" +- else +- lib_linked=no +- fi +- ;; +- *) lib_linked=no ;; +- esac + +- if test "$lib_linked" != yes; then +- $echo "$modename: configuration error: unsupported hardcode properties" +- exit $EXIT_FAILURE +- fi ++# func_extract_archives gentop oldlib ... ++func_extract_archives () ++{ ++ $opt_debug ++ my_gentop="$1"; shift ++ my_oldlibs=${1+"$@"} ++ my_oldobjs="" ++ my_xlib="" ++ my_xabs="" ++ my_xdir="" + +- if test -n "$add_shlibpath"; then +- case :$compile_shlibpath: in +- *":$add_shlibpath:"*) ;; +- *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; +- esac +- fi +- if test "$linkmode" = prog; then +- test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" +- test -n "$add" && compile_deplibs="$add $compile_deplibs" +- else +- test -n "$add_dir" && deplibs="$add_dir $deplibs" +- test -n "$add" && deplibs="$add $deplibs" +- if test "$hardcode_direct" != yes && \ +- test "$hardcode_minus_L" != yes && \ +- test "$hardcode_shlibpath_var" = yes; then +- case :$finalize_shlibpath: in +- *":$libdir:"*) ;; +- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; +- esac +- fi +- fi +- fi ++ for my_xlib in $my_oldlibs; do ++ # Extract the objects. ++ case $my_xlib in ++ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; ++ *) my_xabs=`pwd`"/$my_xlib" ;; ++ esac ++ func_basename "$my_xlib" ++ my_xlib="$func_basename_result" ++ my_xlib_u=$my_xlib ++ while :; do ++ case " $extracted_archives " in ++ *" $my_xlib_u "*) ++ func_arith $extracted_serial + 1 ++ extracted_serial=$func_arith_result ++ my_xlib_u=lt$extracted_serial-$my_xlib ;; ++ *) break ;; ++ esac ++ done ++ extracted_archives="$extracted_archives $my_xlib_u" ++ my_xdir="$my_gentop/$my_xlib_u" + +- if test "$linkmode" = prog || test "$mode" = relink; then +- add_shlibpath= +- add_dir= +- add= +- # Finalize command for both is simple: just hardcode it. +- if test "$hardcode_direct" = yes; then +- add="$libdir/$linklib" +- elif test "$hardcode_minus_L" = yes; then +- add_dir="-L$libdir" +- add="-l$name" +- elif test "$hardcode_shlibpath_var" = yes; then +- case :$finalize_shlibpath: in +- *":$libdir:"*) ;; +- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; +- esac +- add="-l$name" +- elif test "$hardcode_automatic" = yes; then +- if test -n "$inst_prefix_dir" && +- test -f "$inst_prefix_dir$libdir/$linklib" ; then +- add="$inst_prefix_dir$libdir/$linklib" +- else +- add="$libdir/$linklib" +- fi +- else +- # We cannot seem to hardcode it, guess we'll fake it. +- add_dir="-L$libdir" +- # Try looking first in the location we're being installed to. +- if test -n "$inst_prefix_dir"; then +- case $libdir in +- [\\/]*) +- add_dir="$add_dir -L$inst_prefix_dir$libdir" +- ;; +- esac +- fi +- add="-l$name" +- fi ++ func_mkdir_p "$my_xdir" + +- if test "$linkmode" = prog; then +- test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" +- test -n "$add" && finalize_deplibs="$add $finalize_deplibs" +- else +- test -n "$add_dir" && deplibs="$add_dir $deplibs" +- test -n "$add" && deplibs="$add $deplibs" +- fi +- fi +- elif test "$linkmode" = prog; then +- # Here we assume that one of hardcode_direct or hardcode_minus_L +- # is not unsupported. This is valid on all known static and +- # shared platforms. +- if test "$hardcode_direct" != unsupported; then +- test -n "$old_library" && linklib="$old_library" +- compile_deplibs="$dir/$linklib $compile_deplibs" +- finalize_deplibs="$dir/$linklib $finalize_deplibs" ++ case $host in ++ *-darwin*) ++ func_verbose "Extracting $my_xabs" ++ # Do not bother doing anything if just a dry run ++ $opt_dry_run || { ++ darwin_orig_dir=`pwd` ++ cd $my_xdir || exit $? ++ darwin_archive=$my_xabs ++ darwin_curdir=`pwd` ++ darwin_base_archive=`basename "$darwin_archive"` ++ darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` ++ if test -n "$darwin_arches"; then ++ darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` ++ darwin_arch= ++ func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" ++ for darwin_arch in $darwin_arches ; do ++ func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" ++ $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" ++ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" ++ func_extract_an_archive "`pwd`" "${darwin_base_archive}" ++ cd "$darwin_curdir" ++ $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" ++ done # $darwin_arches ++ ## Okay now we've a bunch of thin objects, gotta fatten them up :) ++ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` ++ darwin_file= ++ darwin_files= ++ for darwin_file in $darwin_filelist; do ++ darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` ++ $LIPO -create -output "$darwin_file" $darwin_files ++ done # $darwin_filelist ++ $RM -rf unfat-$$ ++ cd "$darwin_orig_dir" + else +- compile_deplibs="-l$name -L$dir $compile_deplibs" +- finalize_deplibs="-l$name -L$dir $finalize_deplibs" +- fi +- elif test "$build_libtool_libs" = yes; then +- # Not a shared library +- if test "$deplibs_check_method" != pass_all; then +- # We're trying link a shared library against a static one +- # but the system doesn't support it. ++ cd $darwin_orig_dir ++ func_extract_an_archive "$my_xdir" "$my_xabs" ++ fi # $darwin_arches ++ } # !$opt_dry_run ++ ;; ++ *) ++ func_extract_an_archive "$my_xdir" "$my_xabs" ++ ;; ++ esac ++ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` ++ done + +- # Just print a warning and add the library to dependency_libs so +- # that the program can be linked against the static library. +- $echo +- $echo "*** Warning: This system can not link to static lib archive $lib." +- $echo "*** I have the capability to make that library automatically link in when" +- $echo "*** you link to this library. But I can only do this if you have a" +- $echo "*** shared version of the library, which you do not appear to have." +- if test "$module" = yes; then +- $echo "*** But as you try to build a module library, libtool will still create " +- $echo "*** a static module, that should work as long as the dlopening application" +- $echo "*** is linked with the -dlopen flag to resolve symbols at runtime." +- if test -z "$global_symbol_pipe"; then +- $echo +- $echo "*** However, this would only work if libtool was able to extract symbol" +- $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" +- $echo "*** not find such a program. So, this module is probably useless." +- $echo "*** \`nm' from GNU binutils and a full rebuild may help." +- fi +- if test "$build_old_libs" = no; then +- build_libtool_libs=module +- build_old_libs=yes +- else +- build_libtool_libs=no +- fi +- fi +- else +- deplibs="$dir/$old_library $deplibs" +- link_static=yes +- fi +- fi # link shared/static library? ++ func_extract_archives_result="$my_oldobjs" ++} + +- if test "$linkmode" = lib; then +- if test -n "$dependency_libs" && +- { test "$hardcode_into_libs" != yes || +- test "$build_old_libs" = yes || +- test "$link_static" = yes; }; then +- # Extract -R from dependency_libs +- temp_deplibs= +- for libdir in $dependency_libs; do +- case $libdir in +- -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` +- case " $xrpath " in +- *" $temp_xrpath "*) ;; +- *) xrpath="$xrpath $temp_xrpath";; +- esac;; +- *) temp_deplibs="$temp_deplibs $libdir";; +- esac +- done +- dependency_libs="$temp_deplibs" +- fi + +- newlib_search_path="$newlib_search_path $absdir" +- # Link against this library +- test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" +- # ... and its dependency_libs +- tmp_libs= +- for deplib in $dependency_libs; do +- newdependency_libs="$deplib $newdependency_libs" +- if test "X$duplicate_deps" = "Xyes" ; then +- case "$tmp_libs " in +- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; +- esac +- fi +- tmp_libs="$tmp_libs $deplib" +- done + +- if test "$link_all_deplibs" != no; then +- # Add the search paths of all dependency libraries +- for deplib in $dependency_libs; do +- case $deplib in +- -L*) path="$deplib" ;; +- *.la) +- dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` +- test "X$dir" = "X$deplib" && dir="." +- # We need an absolute path. +- case $dir in +- [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; +- *) +- absdir=`cd "$dir" && pwd` +- if test -z "$absdir"; then +- $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 +- absdir="$dir" +- fi +- ;; +- esac +- if grep "^installed=no" $deplib > /dev/null; then +- path="$absdir/$objdir" +- else +- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` +- if test -z "$libdir"; then +- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 +- exit $EXIT_FAILURE +- fi +- if test "$absdir" != "$libdir"; then +- $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 +- fi +- path="$absdir" +- fi +- depdepl= +- case $host in +- *-*-darwin*) +- # we do not want to link against static libs, +- # but need to link against shared +- eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` +- if test -n "$deplibrary_names" ; then +- for tmp in $deplibrary_names ; do +- depdepl=$tmp +- done +- if test -f "$path/$depdepl" ; then +- depdepl="$path/$depdepl" +- fi +- # do not add paths which are already there +- case " $newlib_search_path " in +- *" $path "*) ;; +- *) newlib_search_path="$newlib_search_path $path";; +- esac +- fi +- path="" +- ;; +- *) +- path="-L$path" +- ;; +- esac +- ;; +- -l*) +- case $host in +- *-*-darwin*) +- # Again, we only want to link against shared libraries +- eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"` +- for tmp in $newlib_search_path ; do +- if test -f "$tmp/lib$tmp_libs.dylib" ; then +- eval depdepl="$tmp/lib$tmp_libs.dylib" +- break +- fi +- done +- path="" +- ;; +- *) continue ;; +- esac +- ;; +- *) continue ;; +- esac +- case " $deplibs " in +- *" $path "*) ;; +- *) deplibs="$path $deplibs" ;; +- esac +- case " $deplibs " in +- *" $depdepl "*) ;; +- *) deplibs="$depdepl $deplibs" ;; +- esac +- done +- fi # link_all_deplibs != no +- fi # linkmode = lib +- done # for deplib in $libs +- dependency_libs="$newdependency_libs" +- if test "$pass" = dlpreopen; then +- # Link the dlpreopened libraries before other libraries +- for deplib in $save_deplibs; do +- deplibs="$deplib $deplibs" +- done +- fi +- if test "$pass" != dlopen; then +- if test "$pass" != conv; then +- # Make sure lib_search_path contains only unique directories. +- lib_search_path= +- for dir in $newlib_search_path; do +- case "$lib_search_path " in +- *" $dir "*) ;; +- *) lib_search_path="$lib_search_path $dir" ;; +- esac +- done +- newlib_search_path= ++# func_emit_wrapper arg ++# ++# emit a libtool wrapper script on stdout ++# don't directly open a file because we may want to ++# incorporate the script contents within a cygwin/mingw ++# wrapper executable. Must ONLY be called from within ++# func_mode_link because it depends on a number of variable ++# set therein. ++# ++# arg is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR ++# variable will take. If 'yes', then the emitted script ++# will assume that the directory in which it is stored is ++# the '.lib' directory. This is a cygwin/mingw-specific ++# behavior. ++func_emit_wrapper () ++{ ++ func_emit_wrapper_arg1=no ++ if test -n "$1" ; then ++ func_emit_wrapper_arg1=$1 + fi + +- if test "$linkmode,$pass" != "prog,link"; then +- vars="deplibs" +- else +- vars="compile_deplibs finalize_deplibs" +- fi +- for var in $vars dependency_libs; do +- # Add libraries to $var in reverse order +- eval tmp_libs=\"\$$var\" +- new_libs= +- for deplib in $tmp_libs; do +- # FIXME: Pedantically, this is the right thing to do, so +- # that some nasty dependency loop isn't accidentally +- # broken: +- #new_libs="$deplib $new_libs" +- # Pragmatically, this seems to cause very few problems in +- # practice: +- case $deplib in +- -L*) new_libs="$deplib $new_libs" ;; +- -R*) ;; +- *) +- # And here is the reason: when a library appears more +- # than once as an explicit dependence of a library, or +- # is implicitly linked in more than once by the +- # compiler, it is considered special, and multiple +- # occurrences thereof are not removed. Compare this +- # with having the same library being listed as a +- # dependency of multiple other libraries: in this case, +- # we know (pedantically, we assume) the library does not +- # need to be listed more than once, so we keep only the +- # last copy. This is not always right, but it is rare +- # enough that we require users that really mean to play +- # such unportable linking tricks to link the library +- # using -Wl,-lname, so that libtool does not consider it +- # for duplicate removal. +- case " $specialdeplibs " in +- *" $deplib "*) new_libs="$deplib $new_libs" ;; +- *) +- case " $new_libs " in +- *" $deplib "*) ;; +- *) new_libs="$deplib $new_libs" ;; +- esac +- ;; +- esac +- ;; +- esac +- done +- tmp_libs= +- for deplib in $new_libs; do +- case $deplib in +- -L*) +- case " $tmp_libs " in +- *" $deplib "*) ;; +- *) tmp_libs="$tmp_libs $deplib" ;; +- esac +- ;; +- *) tmp_libs="$tmp_libs $deplib" ;; +- esac +- done +- eval $var=\"$tmp_libs\" +- done # for var +- fi +- # Last step: remove runtime libs from dependency_libs +- # (they stay in deplibs) +- tmp_libs= +- for i in $dependency_libs ; do +- case " $predeps $postdeps $compiler_lib_search_path " in +- *" $i "*) +- i="" +- ;; +- esac +- if test -n "$i" ; then +- tmp_libs="$tmp_libs $i" +- fi +- done +- dependency_libs=$tmp_libs +- done # for pass +- if test "$linkmode" = prog; then +- dlfiles="$newdlfiles" +- dlprefiles="$newdlprefiles" +- fi ++ $ECHO "\ ++#! $SHELL + +- case $linkmode in +- oldlib) +- if test -n "$deplibs"; then +- $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 +- fi ++# $output - temporary wrapper script for $objdir/$outputname ++# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION ++# ++# The $output program cannot be directly executed until all the libtool ++# libraries that it depends on are installed. ++# ++# This wrapper script should never be moved out of the build directory. ++# If it is, it will not operate correctly. + +- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then +- $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 +- fi ++# Sed substitution that helps us do robust quoting. It backslashifies ++# metacharacters that are still active within double-quoted strings. ++Xsed='${SED} -e 1s/^X//' ++sed_quote_subst='$sed_quote_subst' + +- if test -n "$rpath"; then +- $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 +- fi ++# Be Bourne compatible ++if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '\${1+\"\$@\"}'='\"\$@\"' ++ setopt NO_GLOB_SUBST ++else ++ case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac ++fi ++BIN_SH=xpg4; export BIN_SH # for Tru64 ++DUALCASE=1; export DUALCASE # for MKS sh + +- if test -n "$xrpath"; then +- $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 +- fi ++# The HP-UX ksh and POSIX shell print the target directory to stdout ++# if CDPATH is set. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +- if test -n "$vinfo"; then +- $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2 +- fi ++relink_command=\"$relink_command\" + +- if test -n "$release"; then +- $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 +- fi ++# This environment variable determines our operation mode. ++if test \"\$libtool_install_magic\" = \"$magic\"; then ++ # install mode needs the following variables: ++ generated_by_libtool_version='$macro_version' ++ notinst_deplibs='$notinst_deplibs' ++else ++ # When we are sourced in execute mode, \$file and \$ECHO are already set. ++ if test \"\$libtool_execute_magic\" != \"$magic\"; then ++ ECHO=\"$qecho\" ++ file=\"\$0\" ++ # Make sure echo works. ++ if test \"X\$1\" = X--no-reexec; then ++ # Discard the --no-reexec flag, and continue. ++ shift ++ elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then ++ # Yippee, \$ECHO works! ++ : ++ else ++ # Restart under the correct shell, and then maybe \$ECHO will work. ++ exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} ++ fi ++ fi\ ++" ++ $ECHO "\ + +- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then +- $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 +- fi ++ # Find the directory that this script lives in. ++ thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` ++ test \"x\$thisdir\" = \"x\$file\" && thisdir=. + +- # Now set the variables for building old libraries. +- build_libtool_libs=no +- oldlibs="$output" +- objs="$objs$old_deplibs" +- ;; ++ # Follow symbolic links until we get to the real thisdir. ++ file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` ++ while test -n \"\$file\"; do ++ destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` + +- lib) +- # Make sure we only generate libraries of the form `libNAME.la'. +- case $outputname in +- lib*) +- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` +- eval shared_ext=\"$shrext_cmds\" +- eval libname=\"$libname_spec\" +- ;; +- *) +- if test "$module" = no; then +- $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- fi +- if test "$need_lib_prefix" != no; then +- # Add the "lib" prefix for modules if required +- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` +- eval shared_ext=\"$shrext_cmds\" +- eval libname=\"$libname_spec\" +- else +- libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` +- fi +- ;; ++ # If there was a directory component, then change thisdir. ++ if test \"x\$destdir\" != \"x\$file\"; then ++ case \"\$destdir\" in ++ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; ++ *) thisdir=\"\$thisdir/\$destdir\" ;; + esac ++ fi + +- if test -n "$objs"; then +- if test "$deplibs_check_method" != pass_all; then +- $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 +- exit $EXIT_FAILURE +- else +- $echo +- $echo "*** Warning: Linking the shared library $output against the non-libtool" +- $echo "*** objects $objs is not portable!" +- libobjs="$libobjs $objs" +- fi +- fi ++ file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\` ++ file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` ++ done + +- if test "$dlself" != no; then +- $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 +- fi ++ # Usually 'no', except on cygwin/mingw when embedded into ++ # the cwrapper. ++ WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 ++ if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then ++ # special case for '.' ++ if test \"\$thisdir\" = \".\"; then ++ thisdir=\`pwd\` ++ fi ++ # remove .libs from thisdir ++ case \"\$thisdir\" in ++ *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;; ++ $objdir ) thisdir=. ;; ++ esac ++ fi + +- set dummy $rpath +- if test "$#" -gt 2; then +- $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 ++ # Try to get the absolute directory name. ++ absdir=\`cd \"\$thisdir\" && pwd\` ++ test -n \"\$absdir\" && thisdir=\"\$absdir\" ++" ++ ++ if test "$fast_install" = yes; then ++ $ECHO "\ ++ program=lt-'$outputname'$exeext ++ progdir=\"\$thisdir/$objdir\" ++ ++ if test ! -f \"\$progdir/\$program\" || ++ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ ++ test \"X\$file\" != \"X\$progdir/\$program\"; }; then ++ ++ file=\"\$\$-\$program\" ++ ++ if test ! -d \"\$progdir\"; then ++ $MKDIR \"\$progdir\" ++ else ++ $RM \"\$progdir/\$file\" ++ fi" ++ ++ $ECHO "\ ++ ++ # relink executable if necessary ++ if test -n \"\$relink_command\"; then ++ if relink_command_output=\`eval \$relink_command 2>&1\`; then : ++ else ++ $ECHO \"\$relink_command_output\" >&2 ++ $RM \"\$progdir/\$file\" ++ exit 1 + fi +- install_libdir="$2" ++ fi + +- oldlibs= +- if test -z "$rpath"; then +- if test "$build_libtool_libs" = yes; then +- # Building a libtool convenience library. +- # Some compilers have problems with a `.al' extension so +- # convenience libraries should have the same extension an +- # archive normally would. +- oldlibs="$output_objdir/$libname.$libext $oldlibs" +- build_libtool_libs=convenience +- build_old_libs=yes ++ $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || ++ { $RM \"\$progdir/\$program\"; ++ $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } ++ $RM \"\$progdir/\$file\" ++ fi" ++ else ++ $ECHO "\ ++ program='$outputname' ++ progdir=\"\$thisdir/$objdir\" ++" + fi + +- if test -n "$vinfo"; then +- $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2 ++ $ECHO "\ ++ ++ if test -f \"\$progdir/\$program\"; then" ++ ++ # Export our shlibpath_var if we have one. ++ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then ++ $ECHO "\ ++ # Add our own library path to $shlibpath_var ++ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" ++ ++ # Some systems cannot cope with colon-terminated $shlibpath_var ++ # The second colon is a workaround for a bug in BeOS R4 sed ++ $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` ++ ++ export $shlibpath_var ++" + fi + +- if test -n "$release"; then +- $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 ++ # fixup the dll searchpath if we need to. ++ if test -n "$dllsearchpath"; then ++ $ECHO "\ ++ # Add the dll search path components to the executable PATH ++ PATH=$dllsearchpath:\$PATH ++" + fi +- else + +- # Parse the version information argument. +- save_ifs="$IFS"; IFS=':' +- set dummy $vinfo 0 0 0 +- IFS="$save_ifs" ++ $ECHO "\ ++ if test \"\$libtool_execute_magic\" != \"$magic\"; then ++ # Run the actual program with our arguments. ++" ++ case $host in ++ # Backslashes separate directories on plain windows ++ *-*-mingw | *-*-os2*) ++ $ECHO "\ ++ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} ++" ++ ;; + +- if test -n "$8"; then +- $echo "$modename: too many parameters to \`-version-info'" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- fi ++ *) ++ $ECHO "\ ++ exec \"\$progdir/\$program\" \${1+\"\$@\"} ++" ++ ;; ++ esac ++ $ECHO "\ ++ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 ++ exit 1 ++ fi ++ else ++ # The program doesn't exist. ++ \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 ++ \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 ++ $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 ++ exit 1 ++ fi ++fi\ ++" ++} ++# end: func_emit_wrapper + +- # convert absolute version numbers to libtool ages +- # this retains compatibility with .la files and attempts +- # to make the code below a bit more comprehensible ++# func_emit_cwrapperexe_src ++# emit the source code for a wrapper executable on stdout ++# Must ONLY be called from within func_mode_link because ++# it depends on a number of variable set therein. ++func_emit_cwrapperexe_src () ++{ ++ cat <&2 +- $echo "$modename: \`$vinfo' is not valid version information" 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac ++ The $output program cannot be directly executed until all the libtool ++ libraries that it depends on are installed. + +- case $revision in +- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; +- *) +- $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2 +- $echo "$modename: \`$vinfo' is not valid version information" 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac ++ This wrapper executable should never be moved out of the build directory. ++ If it is, it will not operate correctly. + +- case $age in +- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; +- *) +- $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2 +- $echo "$modename: \`$vinfo' is not valid version information" 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac ++ Currently, it simply execs the wrapper *script* "$SHELL $output", ++ but could eventually absorb all of the scripts functionality and ++ exec $objdir/$outputname directly. ++*/ ++EOF ++ cat <<"EOF" ++#include ++#include ++#ifdef _MSC_VER ++# include ++# include ++# include ++# define setmode _setmode ++#else ++# include ++# include ++# ifdef __CYGWIN__ ++# include ++# endif ++#endif ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + +- if test "$age" -gt "$current"; then +- $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 +- $echo "$modename: \`$vinfo' is not valid version information" 1>&2 +- exit $EXIT_FAILURE +- fi ++#if defined(PATH_MAX) ++# define LT_PATHMAX PATH_MAX ++#elif defined(MAXPATHLEN) ++# define LT_PATHMAX MAXPATHLEN ++#else ++# define LT_PATHMAX 1024 ++#endif + +- # Calculate the version variables. +- major= +- versuffix= +- verstring= +- case $version_type in +- none) ;; ++#ifndef S_IXOTH ++# define S_IXOTH 0 ++#endif ++#ifndef S_IXGRP ++# define S_IXGRP 0 ++#endif + +- darwin) +- # Like Linux, but with the current version available in +- # verstring for coding it into the library header +- major=.`expr $current - $age` +- versuffix="$major.$age.$revision" +- # Darwin ld doesn't like 0 for these options... +- minor_current=`expr $current + 1` +- xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" +- verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" +- ;; ++#ifdef _MSC_VER ++# define S_IXUSR _S_IEXEC ++# define stat _stat ++# ifndef _INTPTR_T_DEFINED ++# define intptr_t int ++# endif ++#endif + +- freebsd-aout) +- major=".$current" +- versuffix=".$current.$revision"; +- ;; ++#ifndef DIR_SEPARATOR ++# define DIR_SEPARATOR '/' ++# define PATH_SEPARATOR ':' ++#endif + +- freebsd-elf) +- major=".$current" +- versuffix=".$current"; +- ;; ++#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ ++ defined (__OS2__) ++# define HAVE_DOS_BASED_FILE_SYSTEM ++# define FOPEN_WB "wb" ++# ifndef DIR_SEPARATOR_2 ++# define DIR_SEPARATOR_2 '\\' ++# endif ++# ifndef PATH_SEPARATOR_2 ++# define PATH_SEPARATOR_2 ';' ++# endif ++#endif + +- irix | nonstopux) +- if test "X$lt_irix_increment" = "Xno"; then +- major=`expr $current - $age` +- else +- major=`expr $current - $age + 1` +- fi +- case $version_type in +- nonstopux) verstring_prefix=nonstopux ;; +- *) verstring_prefix=sgi ;; +- esac +- verstring="$verstring_prefix$major.$revision" ++#ifndef DIR_SEPARATOR_2 ++# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) ++#else /* DIR_SEPARATOR_2 */ ++# define IS_DIR_SEPARATOR(ch) \ ++ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) ++#endif /* DIR_SEPARATOR_2 */ + +- # Add in all the interfaces that we are compatible with. +- loop=$revision +- while test "$loop" -ne 0; do +- iface=`expr $revision - $loop` +- loop=`expr $loop - 1` +- verstring="$verstring_prefix$major.$iface:$verstring" +- done ++#ifndef PATH_SEPARATOR_2 ++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) ++#else /* PATH_SEPARATOR_2 */ ++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) ++#endif /* PATH_SEPARATOR_2 */ + +- # Before this point, $major must not contain `.'. +- major=.$major +- versuffix="$major.$revision" +- ;; ++#ifdef __CYGWIN__ ++# define FOPEN_WB "wb" ++#endif + +- linux) +- major=.`expr $current - $age` +- versuffix="$major.$age.$revision" +- ;; ++#ifndef FOPEN_WB ++# define FOPEN_WB "w" ++#endif ++#ifndef _O_BINARY ++# define _O_BINARY 0 ++#endif + +- osf) +- major=.`expr $current - $age` +- versuffix=".$current.$age.$revision" +- verstring="$current.$age.$revision" ++#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) ++#define XFREE(stale) do { \ ++ if (stale) { free ((void *) stale); stale = 0; } \ ++} while (0) + +- # Add in all the interfaces that we are compatible with. +- loop=$age +- while test "$loop" -ne 0; do +- iface=`expr $current - $loop` +- loop=`expr $loop - 1` +- verstring="$verstring:${iface}.0" +- done ++#undef LTWRAPPER_DEBUGPRINTF ++#if defined DEBUGWRAPPER ++# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args ++static void ++ltwrapper_debugprintf (const char *fmt, ...) ++{ ++ va_list args; ++ va_start (args, fmt); ++ (void) vfprintf (stderr, fmt, args); ++ va_end (args); ++} ++#else ++# define LTWRAPPER_DEBUGPRINTF(args) ++#endif + +- # Make executables depend on our current version. +- verstring="$verstring:${current}.0" +- ;; ++const char *program_name = NULL; + +- sunos) +- major=".$current" +- versuffix=".$current.$revision" +- ;; ++void *xmalloc (size_t num); ++char *xstrdup (const char *string); ++const char *base_name (const char *name); ++char *find_executable (const char *wrapper); ++char *chase_symlinks (const char *pathspec); ++int make_executable (const char *path); ++int check_executable (const char *path); ++char *strendzap (char *str, const char *pat); ++void lt_fatal (const char *message, ...); + +- windows) +- # Use '-' rather than '.', since we only want one +- # extension on DOS 8.3 filesystems. +- major=`expr $current - $age` +- versuffix="-$major" +- ;; ++static const char *script_text = ++EOF + +- *) +- $echo "$modename: unknown library version type \`$version_type'" 1>&2 +- $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac ++ func_emit_wrapper yes | ++ $SED -e 's/\([\\"]\)/\\\1/g' \ ++ -e 's/^/ "/' -e 's/$/\\n"/' ++ echo ";" + +- # Clear the version info if we defaulted, and they specified a release. +- if test -z "$vinfo" && test -n "$release"; then +- major= +- case $version_type in +- darwin) +- # we can't check for "0.0" in archive_cmds due to quoting +- # problems, so we reset it completely +- verstring= +- ;; +- *) +- verstring="0.0" +- ;; +- esac +- if test "$need_version" = no; then +- versuffix= +- else +- versuffix=".0.0" +- fi +- fi ++ cat <&2 +- build_libtool_libs=no +- build_old_libs=yes +- fi +- else +- # Don't allow undefined symbols. +- allow_undefined_flag="$no_undefined_flag" +- fi +- fi ++ const char *dumpscript_opt = "--lt-dump-script"; ++ int i; + +- if test "$mode" != relink; then +- # Remove our outputs, but don't remove object files since they +- # may have been created when compiling PIC objects. +- removelist= +- tempremovelist=`$echo "$output_objdir/*"` +- for p in $tempremovelist; do +- case $p in +- *.$objext) +- ;; +- $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) +- if test "X$precious_files_regex" != "X"; then +- if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 +- then +- continue +- fi +- fi +- removelist="$removelist $p" +- ;; +- *) ;; +- esac +- done +- if test -n "$removelist"; then +- $show "${rm}r $removelist" +- $run ${rm}r $removelist +- fi +- fi ++ program_name = (char *) xstrdup (base_name (argv[0])); ++ LTWRAPPER_DEBUGPRINTF (("(main) argv[0] : %s\n", argv[0])); ++ LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name)); + +- # Now set the variables for building old libraries. +- if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then +- oldlibs="$oldlibs $output_objdir/$libname.$libext" ++ /* very simple arg parsing; don't want to rely on getopt */ ++ for (i = 1; i < argc; i++) ++ { ++ if (strcmp (argv[i], dumpscript_opt) == 0) ++ { ++EOF ++ case "$host" in ++ *mingw* | *cygwin* ) ++ # make stdout use "unix" line endings ++ echo " setmode(1,_O_BINARY);" ++ ;; ++ esac + +- # Transform .lo files to .o files. +- oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` +- fi ++ cat </dev/null || echo $SHELL` ++ case $lt_newargv0 in ++ *.exe | *.EXE) ;; ++ *) lt_newargv0=$lt_newargv0.exe ;; ++ esac ++ ;; ++ * ) lt_newargv0=$SHELL ;; ++ esac ++ fi + +- # Make sure dlfiles contains only unique files that won't be dlpreopened +- old_dlfiles="$dlfiles" +- dlfiles= +- for lib in $old_dlfiles; do +- case " $dlprefiles $dlfiles " in +- *" $lib "*) ;; +- *) dlfiles="$dlfiles $lib" ;; +- esac +- done ++ cat < conftest.c <= 0) ++ && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) ++ return 1; ++ else ++ return 0; ++} ++ ++int ++make_executable (const char *path) ++{ ++ int rval = 0; ++ struct stat st; ++ ++ LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n", ++ path ? (*path ? path : "EMPTY!") : "NULL!")); ++ if ((!path) || (!*path)) ++ return 0; ++ ++ if (stat (path, &st) >= 0) ++ { ++ rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); ++ } ++ return rval; ++} ++ ++/* Searches for the full path of the wrapper. Returns ++ newly allocated full path name if found, NULL otherwise ++ Does not chase symlinks, even on platforms that support them. ++*/ ++char * ++find_executable (const char *wrapper) ++{ ++ int has_slash = 0; ++ const char *p; ++ const char *p_next; ++ /* static buffer for getcwd */ ++ char tmp[LT_PATHMAX + 1]; ++ int tmp_len; ++ char *concat_name; ++ ++ LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n", ++ wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!")); ++ ++ if ((wrapper == NULL) || (*wrapper == '\0')) ++ return NULL; ++ ++ /* Absolute path? */ ++#if defined (HAVE_DOS_BASED_FILE_SYSTEM) ++ if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') ++ { ++ concat_name = xstrdup (wrapper); ++ if (check_executable (concat_name)) ++ return concat_name; ++ XFREE (concat_name); ++ } ++ else ++ { ++#endif ++ if (IS_DIR_SEPARATOR (wrapper[0])) ++ { ++ concat_name = xstrdup (wrapper); ++ if (check_executable (concat_name)) ++ return concat_name; ++ XFREE (concat_name); ++ } ++#if defined (HAVE_DOS_BASED_FILE_SYSTEM) ++ } ++#endif ++ ++ for (p = wrapper; *p; p++) ++ if (*p == '/') ++ { ++ has_slash = 1; ++ break; ++ } ++ if (!has_slash) ++ { ++ /* no slashes; search PATH */ ++ const char *path = getenv ("PATH"); ++ if (path != NULL) ++ { ++ for (p = path; *p; p = p_next) ++ { ++ const char *q; ++ size_t p_len; ++ for (q = p; *q; q++) ++ if (IS_PATH_SEPARATOR (*q)) ++ break; ++ p_len = q - p; ++ p_next = (*q == '\0' ? q : q + 1); ++ if (p_len == 0) ++ { ++ /* empty path: current directory */ ++ if (getcwd (tmp, LT_PATHMAX) == NULL) ++ lt_fatal ("getcwd failed"); ++ tmp_len = strlen (tmp); ++ concat_name = ++ XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); ++ memcpy (concat_name, tmp, tmp_len); ++ concat_name[tmp_len] = '/'; ++ strcpy (concat_name + tmp_len + 1, wrapper); ++ } + else +- newdeplibs="$newdeplibs $i" +- fi +- done +- fi +- ;; +- file_magic*) +- set dummy $deplibs_check_method +- file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` +- for a_deplib in $deplibs; do +- name=`expr $a_deplib : '-l\(.*\)'` +- # If $name is empty we are operating on a -L argument. +- if test "$name" != "" && test "$name" != "0"; then +- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then +- case " $predeps $postdeps " in +- *" $a_deplib "*) +- newdeplibs="$newdeplibs $a_deplib" +- a_deplib="" +- ;; +- esac +- fi +- if test -n "$a_deplib" ; then +- libname=`eval \\$echo \"$libname_spec\"` +- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do +- potential_libs=`ls $i/$libname[.-]* 2>/dev/null` +- for potent_lib in $potential_libs; do +- # Follow soft links. +- if ls -lLd "$potent_lib" 2>/dev/null \ +- | grep " -> " >/dev/null; then +- continue +- fi +- # The statement above tries to avoid entering an +- # endless loop below, in case of cyclic links. +- # We might still enter an endless loop, since a link +- # loop can be closed while we follow links, +- # but so what? +- potlib="$potent_lib" +- while test -h "$potlib" 2>/dev/null; do +- potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` +- case $potliblink in +- [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; +- *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; +- esac +- done +- if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ +- | ${SED} 10q \ +- | $EGREP "$file_magic_regex" > /dev/null; then +- newdeplibs="$newdeplibs $a_deplib" +- a_deplib="" +- break 2 +- fi +- done +- done +- fi +- if test -n "$a_deplib" ; then +- droppeddeps=yes +- $echo +- $echo "*** Warning: linker path does not have real file for library $a_deplib." +- $echo "*** I have the capability to make that library automatically link in when" +- $echo "*** you link to this library. But I can only do this if you have a" +- $echo "*** shared version of the library, which you do not appear to have" +- $echo "*** because I did check the linker path looking for a file starting" +- if test -z "$potlib" ; then +- $echo "*** with $libname but no candidates were found. (...for file magic test)" +- else +- $echo "*** with $libname and none of the candidates passed a file format test" +- $echo "*** using a file magic. Last file checked: $potlib" +- fi +- fi +- else +- # Add a -L argument. +- newdeplibs="$newdeplibs $a_deplib" +- fi +- done # Gone through all deplibs. +- ;; +- match_pattern*) +- set dummy $deplibs_check_method +- match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` +- for a_deplib in $deplibs; do +- name=`expr $a_deplib : '-l\(.*\)'` +- # If $name is empty we are operating on a -L argument. +- if test -n "$name" && test "$name" != "0"; then +- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then +- case " $predeps $postdeps " in +- *" $a_deplib "*) +- newdeplibs="$newdeplibs $a_deplib" +- a_deplib="" +- ;; +- esac +- fi +- if test -n "$a_deplib" ; then +- libname=`eval \\$echo \"$libname_spec\"` +- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do +- potential_libs=`ls $i/$libname[.-]* 2>/dev/null` +- for potent_lib in $potential_libs; do +- potlib="$potent_lib" # see symlink-check above in file_magic test +- if eval $echo \"$potent_lib\" 2>/dev/null \ +- | ${SED} 10q \ +- | $EGREP "$match_pattern_regex" > /dev/null; then +- newdeplibs="$newdeplibs $a_deplib" +- a_deplib="" +- break 2 +- fi +- done +- done +- fi +- if test -n "$a_deplib" ; then +- droppeddeps=yes +- $echo +- $echo "*** Warning: linker path does not have real file for library $a_deplib." +- $echo "*** I have the capability to make that library automatically link in when" +- $echo "*** you link to this library. But I can only do this if you have a" +- $echo "*** shared version of the library, which you do not appear to have" +- $echo "*** because I did check the linker path looking for a file starting" +- if test -z "$potlib" ; then +- $echo "*** with $libname but no candidates were found. (...for regex pattern test)" +- else +- $echo "*** with $libname and none of the candidates passed a file format test" +- $echo "*** using a regex pattern. Last file checked: $potlib" +- fi +- fi +- else +- # Add a -L argument. +- newdeplibs="$newdeplibs $a_deplib" +- fi +- done # Gone through all deplibs. +- ;; +- none | unknown | *) +- newdeplibs="" +- tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ +- -e 's/ -[LR][^ ]*//g'` +- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then +- for i in $predeps $postdeps ; do +- # can't use Xsed below, because $i might contain '/' +- tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"` +- done +- fi +- if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \ +- | grep . >/dev/null; then +- $echo +- if test "X$deplibs_check_method" = "Xnone"; then +- $echo "*** Warning: inter-library dependencies are not supported in this platform." +- else +- $echo "*** Warning: inter-library dependencies are not known to be supported." +- fi +- $echo "*** All declared inter-library dependencies are being dropped." +- droppeddeps=yes +- fi +- ;; +- esac +- versuffix=$versuffix_save +- major=$major_save +- release=$release_save +- libname=$libname_save +- name=$name_save +- +- case $host in +- *-*-rhapsody* | *-*-darwin1.[012]) +- # On Rhapsody replace the C library is the System framework +- newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` +- ;; +- esac ++ { ++ concat_name = ++ XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); ++ memcpy (concat_name, p, p_len); ++ concat_name[p_len] = '/'; ++ strcpy (concat_name + p_len + 1, wrapper); ++ } ++ if (check_executable (concat_name)) ++ return concat_name; ++ XFREE (concat_name); ++ } ++ } ++ /* not found in PATH; assume curdir */ ++ } ++ /* Relative path | not found in path: prepend cwd */ ++ if (getcwd (tmp, LT_PATHMAX) == NULL) ++ lt_fatal ("getcwd failed"); ++ tmp_len = strlen (tmp); ++ concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); ++ memcpy (concat_name, tmp, tmp_len); ++ concat_name[tmp_len] = '/'; ++ strcpy (concat_name + tmp_len + 1, wrapper); + +- if test "$droppeddeps" = yes; then +- if test "$module" = yes; then +- $echo +- $echo "*** Warning: libtool could not satisfy all declared inter-library" +- $echo "*** dependencies of module $libname. Therefore, libtool will create" +- $echo "*** a static module, that should work as long as the dlopening" +- $echo "*** application is linked with the -dlopen flag." +- if test -z "$global_symbol_pipe"; then +- $echo +- $echo "*** However, this would only work if libtool was able to extract symbol" +- $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" +- $echo "*** not find such a program. So, this module is probably useless." +- $echo "*** \`nm' from GNU binutils and a full rebuild may help." +- fi +- if test "$build_old_libs" = no; then +- oldlibs="$output_objdir/$libname.$libext" +- build_libtool_libs=module +- build_old_libs=yes +- else +- build_libtool_libs=no +- fi +- else +- $echo "*** The inter-library dependencies that have been dropped here will be" +- $echo "*** automatically added whenever a program is linked with this library" +- $echo "*** or is declared to -dlopen it." ++ if (check_executable (concat_name)) ++ return concat_name; ++ XFREE (concat_name); ++ return NULL; ++} + +- if test "$allow_undefined" = no; then +- $echo +- $echo "*** Since this library must not contain undefined symbols," +- $echo "*** because either the platform does not support them or" +- $echo "*** it was explicitly requested with -no-undefined," +- $echo "*** libtool will only create a static version of it." +- if test "$build_old_libs" = no; then +- oldlibs="$output_objdir/$libname.$libext" +- build_libtool_libs=module +- build_old_libs=yes +- else +- build_libtool_libs=no +- fi +- fi +- fi +- fi +- # Done checking deplibs! +- deplibs=$newdeplibs +- fi ++char * ++chase_symlinks (const char *pathspec) ++{ ++#ifndef S_ISLNK ++ return xstrdup (pathspec); ++#else ++ char buf[LT_PATHMAX]; ++ struct stat s; ++ char *tmp_pathspec = xstrdup (pathspec); ++ char *p; ++ int has_symlinks = 0; ++ while (strlen (tmp_pathspec) && !has_symlinks) ++ { ++ LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n", ++ tmp_pathspec)); ++ if (lstat (tmp_pathspec, &s) == 0) ++ { ++ if (S_ISLNK (s.st_mode) != 0) ++ { ++ has_symlinks = 1; ++ break; ++ } + ++ /* search backwards for last DIR_SEPARATOR */ ++ p = tmp_pathspec + strlen (tmp_pathspec) - 1; ++ while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) ++ p--; ++ if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) ++ { ++ /* no more DIR_SEPARATORS left */ ++ break; ++ } ++ *p = '\0'; ++ } ++ else ++ { ++ char *errstr = strerror (errno); ++ lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr); ++ } ++ } ++ XFREE (tmp_pathspec); + +- # move library search paths that coincide with paths to not yet +- # installed libraries to the beginning of the library search list +- new_libs= +- for path in $notinst_path; do +- case " $new_libs " in +- *" -L$path/$objdir "*) ;; +- *) +- case " $deplibs " in +- *" -L$path/$objdir "*) +- new_libs="$new_libs -L$path/$objdir" ;; +- esac +- ;; +- esac +- done +- for deplib in $deplibs; do +- case $deplib in +- -L*) +- case " $new_libs " in +- *" $deplib "*) ;; +- *) new_libs="$new_libs $deplib" ;; +- esac +- ;; +- *) new_libs="$new_libs $deplib" ;; +- esac +- done +- deplibs="$new_libs" ++ if (!has_symlinks) ++ { ++ return xstrdup (pathspec); ++ } + ++ tmp_pathspec = realpath (pathspec, buf); ++ if (tmp_pathspec == 0) ++ { ++ lt_fatal ("Could not follow symlinks for %s", pathspec); ++ } ++ return xstrdup (tmp_pathspec); ++#endif ++} + +- # All the library-specific variables (install_libdir is set above). +- library_names= +- old_library= +- dlname= ++char * ++strendzap (char *str, const char *pat) ++{ ++ size_t len, patlen; + +- # Test again, we may have decided not to build it any more +- if test "$build_libtool_libs" = yes; then +- if test "$hardcode_into_libs" = yes; then +- # Hardcode the library paths +- hardcode_libdirs= +- dep_rpath= +- rpath="$finalize_rpath" +- test "$mode" != relink && rpath="$compile_rpath$rpath" +- for libdir in $rpath; do +- if test -n "$hardcode_libdir_flag_spec"; then +- if test -n "$hardcode_libdir_separator"; then +- if test -z "$hardcode_libdirs"; then +- hardcode_libdirs="$libdir" +- else +- # Just accumulate the unique libdirs. +- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in +- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) +- ;; +- *) +- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" +- ;; +- esac +- fi +- else +- eval flag=\"$hardcode_libdir_flag_spec\" +- dep_rpath="$dep_rpath $flag" +- fi +- elif test -n "$runpath_var"; then +- case "$perm_rpath " in +- *" $libdir "*) ;; +- *) perm_rpath="$perm_rpath $libdir" ;; +- esac +- fi +- done +- # Substitute the hardcoded libdirs into the rpath. +- if test -n "$hardcode_libdir_separator" && +- test -n "$hardcode_libdirs"; then +- libdir="$hardcode_libdirs" +- if test -n "$hardcode_libdir_flag_spec_ld"; then +- case $archive_cmds in +- *\$LD*) eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ;; +- *) eval dep_rpath=\"$hardcode_libdir_flag_spec\" ;; +- esac +- else +- eval dep_rpath=\"$hardcode_libdir_flag_spec\" +- fi +- fi +- if test -n "$runpath_var" && test -n "$perm_rpath"; then +- # We should set the runpath_var. +- rpath= +- for dir in $perm_rpath; do +- rpath="$rpath$dir:" +- done +- eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" +- fi +- test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" +- fi ++ assert (str != NULL); ++ assert (pat != NULL); + +- shlibpath="$finalize_shlibpath" +- test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" +- if test -n "$shlibpath"; then +- eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" +- fi ++ len = strlen (str); ++ patlen = strlen (pat); + +- # Get the real and link names of the library. +- eval shared_ext=\"$shrext_cmds\" +- eval library_names=\"$library_names_spec\" +- set dummy $library_names +- realname="$2" +- shift; shift ++ if (patlen <= len) ++ { ++ str += len - patlen; ++ if (strcmp (str, pat) == 0) ++ *str = '\0'; ++ } ++ return str; ++} + +- if test -n "$soname_spec"; then +- eval soname=\"$soname_spec\" +- else +- soname="$realname" +- fi +- if test -z "$dlname"; then +- dlname=$soname +- fi ++static void ++lt_error_core (int exit_status, const char *mode, ++ const char *message, va_list ap) ++{ ++ fprintf (stderr, "%s: %s: ", program_name, mode); ++ vfprintf (stderr, message, ap); ++ fprintf (stderr, ".\n"); + +- lib="$output_objdir/$realname" +- linknames= +- for link +- do +- linknames="$linknames $link" +- done ++ if (exit_status >= 0) ++ exit (exit_status); ++} + +- # Use standard objects if they are pic +- test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` ++void ++lt_fatal (const char *message, ...) ++{ ++ va_list ap; ++ va_start (ap, message); ++ lt_error_core (EXIT_FAILURE, "FATAL", message, ap); ++ va_end (ap); ++} ++EOF ++} ++# end: func_emit_cwrapperexe_src + +- # Prepare the list of exported symbols +- if test -z "$export_symbols"; then +- if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then +- $show "generating symbol list for \`$libname.la'" +- export_symbols="$output_objdir/$libname.exp" +- $run $rm $export_symbols +- cmds=$export_symbols_cmds +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- if len=`expr "X$cmd" : ".*"` && +- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then +- $show "$cmd" +- $run eval "$cmd" || exit $? +- skipped_export=false +- else +- # The command line is too long to execute in one step. +- $show "using reloadable object file for export list..." +- skipped_export=: +- # Break out early, otherwise skipped_export may be +- # set to false by a later but shorter cmd. +- break +- fi +- done +- IFS="$save_ifs" +- if test -n "$export_symbols_regex"; then +- $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" +- $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' +- $show "$mv \"${export_symbols}T\" \"$export_symbols\"" +- $run eval '$mv "${export_symbols}T" "$export_symbols"' +- fi +- fi +- fi ++# func_mode_link arg... ++func_mode_link () ++{ ++ $opt_debug ++ case $host in ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) ++ # It is impossible to link a dll without this setting, and ++ # we shouldn't force the makefile maintainer to figure out ++ # which system we are compiling for in order to pass an extra ++ # flag for every libtool invocation. ++ # allow_undefined=no + +- if test -n "$export_symbols" && test -n "$include_expsyms"; then +- $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' +- fi ++ # FIXME: Unfortunately, there are problems with the above when trying ++ # to make a dll which has undefined symbols, in which case not ++ # even a static library is built. For now, we need to specify ++ # -no-undefined on the libtool link line when we can be certain ++ # that all symbols are satisfied, otherwise we get a static library. ++ allow_undefined=yes ++ ;; ++ *) ++ allow_undefined=yes ++ ;; ++ esac ++ libtool_args=$nonopt ++ base_compile="$nonopt $@" ++ compile_command=$nonopt ++ finalize_command=$nonopt + +- tmp_deplibs= +- for test_deplib in $deplibs; do +- case " $convenience " in +- *" $test_deplib "*) ;; +- *) +- tmp_deplibs="$tmp_deplibs $test_deplib" +- ;; +- esac +- done +- deplibs="$tmp_deplibs" ++ compile_rpath= ++ finalize_rpath= ++ compile_shlibpath= ++ finalize_shlibpath= ++ convenience= ++ old_convenience= ++ deplibs= ++ old_deplibs= ++ compiler_flags= ++ linker_flags= ++ dllsearchpath= ++ lib_search_path=`pwd` ++ inst_prefix_dir= ++ new_inherited_linker_flags= + +- if test -n "$convenience"; then +- if test -n "$whole_archive_flag_spec"; then +- save_libobjs=$libobjs +- eval libobjs=\"\$libobjs $whole_archive_flag_spec\" +- else +- gentop="$output_objdir/${outputname}x" +- generated="$generated $gentop" ++ avoid_version=no ++ dlfiles= ++ dlprefiles= ++ dlself=no ++ export_dynamic=no ++ export_symbols= ++ export_symbols_regex= ++ generated= ++ libobjs= ++ ltlibs= ++ module=no ++ no_install=no ++ objs= ++ non_pic_objects= ++ precious_files_regex= ++ prefer_static_libs=no ++ preload=no ++ prev= ++ prevarg= ++ release= ++ rpath= ++ xrpath= ++ perm_rpath= ++ temp_rpath= ++ thread_safe=no ++ vinfo= ++ vinfo_number=no ++ weak_libs= ++ single_module="${wl}-single_module" ++ func_infer_tag $base_compile + +- func_extract_archives $gentop $convenience +- libobjs="$libobjs $func_extract_archives_result" ++ # We need to know -static, to get the right output filenames. ++ for arg ++ do ++ case $arg in ++ -shared) ++ test "$build_libtool_libs" != yes && \ ++ func_fatal_configuration "can not build a shared library" ++ build_old_libs=no ++ break ++ ;; ++ -all-static | -static | -static-libtool-libs) ++ case $arg in ++ -all-static) ++ if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then ++ func_warning "complete static linking is impossible in this configuration" + fi +- fi +- +- if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then +- eval flag=\"$thread_safe_flag_spec\" +- linker_flags="$linker_flags $flag" +- fi +- +- # Make a backup of the uninstalled library when relinking +- if test "$mode" = relink; then +- $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? +- fi +- +- # Do each of the archive commands. +- if test "$module" = yes && test -n "$module_cmds" ; then +- if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then +- eval test_cmds=\"$module_expsym_cmds\" +- cmds=$module_expsym_cmds +- else +- eval test_cmds=\"$module_cmds\" +- cmds=$module_cmds ++ if test -n "$link_static_flag"; then ++ dlopen_self=$dlopen_self_static + fi +- else +- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then +- eval test_cmds=\"$archive_expsym_cmds\" +- cmds=$archive_expsym_cmds +- else +- eval test_cmds=\"$archive_cmds\" +- cmds=$archive_cmds ++ prefer_static_libs=yes ++ ;; ++ -static) ++ if test -z "$pic_flag" && test -n "$link_static_flag"; then ++ dlopen_self=$dlopen_self_static + fi +- fi +- +- if test "X$skipped_export" != "X:" && +- len=`expr "X$test_cmds" : ".*" 2>/dev/null` && +- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then +- : +- else +- # The command line is too long to link in one step, link piecewise. +- $echo "creating reloadable object files..." +- +- # Save the value of $output and $libobjs because we want to +- # use them later. If we have whole_archive_flag_spec, we +- # want to use save_libobjs as it was before +- # whole_archive_flag_spec was expanded, because we can't +- # assume the linker understands whole_archive_flag_spec. +- # This may have to be revisited, in case too many +- # convenience libraries get linked in and end up exceeding +- # the spec. +- if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then +- save_libobjs=$libobjs ++ prefer_static_libs=built ++ ;; ++ -static-libtool-libs) ++ if test -z "$pic_flag" && test -n "$link_static_flag"; then ++ dlopen_self=$dlopen_self_static + fi +- save_output=$output +- output_la=`$echo "X$output" | $Xsed -e "$basename"` +- +- # Clear the reloadable object creation command queue and +- # initialize k to one. +- test_cmds= +- concat_cmds= +- objlist= +- delfiles= +- last_robj= +- k=1 +- output=$output_objdir/$output_la-${k}.$objext +- # Loop over the list of objects to be linked. +- for obj in $save_libobjs +- do +- eval test_cmds=\"$reload_cmds $objlist $last_robj\" +- if test "X$objlist" = X || +- { len=`expr "X$test_cmds" : ".*" 2>/dev/null` && +- test "$len" -le "$max_cmd_len"; }; then +- objlist="$objlist $obj" +- else +- # The command $test_cmds is almost too long, add a +- # command to the queue. +- if test "$k" -eq 1 ; then +- # The first file doesn't have a previous command to add. +- eval concat_cmds=\"$reload_cmds $objlist $last_robj\" +- else +- # All subsequent reloadable object files will link in +- # the last one created. +- eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" +- fi +- last_robj=$output_objdir/$output_la-${k}.$objext +- k=`expr $k + 1` +- output=$output_objdir/$output_la-${k}.$objext +- objlist=$obj +- len=1 +- fi +- done +- # Handle the remaining objects by creating one last +- # reloadable object file. All subsequent reloadable object +- # files will link in the last one created. +- test -z "$concat_cmds" || concat_cmds=$concat_cmds~ +- eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" +- +- if ${skipped_export-false}; then +- $show "generating symbol list for \`$libname.la'" +- export_symbols="$output_objdir/$libname.exp" +- $run $rm $export_symbols +- libobjs=$output +- # Append the command to create the export file. +- eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" +- fi +- +- # Set up a command to remove the reloadable object files +- # after they are used. +- i=0 +- while test "$i" -lt "$k" +- do +- i=`expr $i + 1` +- delfiles="$delfiles $output_objdir/$output_la-${i}.$objext" +- done ++ prefer_static_libs=yes ++ ;; ++ esac ++ build_libtool_libs=no ++ build_old_libs=yes ++ break ++ ;; ++ esac ++ done + +- $echo "creating a temporary reloadable object file: $output" ++ # See if our shared archives depend on static archives. ++ test -n "$old_archive_from_new_cmds" && build_old_libs=yes + +- # Loop through the commands generated above and execute them. +- save_ifs="$IFS"; IFS='~' +- for cmd in $concat_cmds; do +- IFS="$save_ifs" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done +- IFS="$save_ifs" ++ # Go through the arguments, transforming them on the way. ++ while test "$#" -gt 0; do ++ arg="$1" ++ shift ++ func_quote_for_eval "$arg" ++ qarg=$func_quote_for_eval_unquoted_result ++ func_append libtool_args " $func_quote_for_eval_result" + +- libobjs=$output +- # Restore the value of output. +- output=$save_output ++ # If the previous option needs an argument, assign it. ++ if test -n "$prev"; then ++ case $prev in ++ output) ++ func_append compile_command " @OUTPUT@" ++ func_append finalize_command " @OUTPUT@" ++ ;; ++ esac + +- if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then +- eval libobjs=\"\$libobjs $whole_archive_flag_spec\" ++ case $prev in ++ dlfiles|dlprefiles) ++ if test "$preload" = no; then ++ # Add the symbol object into the linking commands. ++ func_append compile_command " @SYMFILE@" ++ func_append finalize_command " @SYMFILE@" ++ preload=yes + fi +- # Expand the library linking commands again to reset the +- # value of $libobjs for piecewise linking. +- +- # Do each of the archive commands. +- if test "$module" = yes && test -n "$module_cmds" ; then +- if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then +- cmds=$module_expsym_cmds ++ case $arg in ++ *.la | *.lo) ;; # We handle these cases below. ++ force) ++ if test "$dlself" = no; then ++ dlself=needless ++ export_dynamic=yes ++ fi ++ prev= ++ continue ++ ;; ++ self) ++ if test "$prev" = dlprefiles; then ++ dlself=yes ++ elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then ++ dlself=yes + else +- cmds=$module_cmds ++ dlself=needless ++ export_dynamic=yes + fi +- else +- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then +- cmds=$archive_expsym_cmds +- else +- cmds=$archive_cmds ++ prev= ++ continue ++ ;; ++ *) ++ if test "$prev" = dlfiles; then ++ dlfiles="$dlfiles $arg" ++ else ++ dlprefiles="$dlprefiles $arg" + fi +- fi ++ prev= ++ continue ++ ;; ++ esac ++ ;; ++ expsyms) ++ export_symbols="$arg" ++ test -f "$arg" \ ++ || func_fatal_error "symbol file \`$arg' does not exist" ++ prev= ++ continue ++ ;; ++ expsyms_regex) ++ export_symbols_regex="$arg" ++ prev= ++ continue ++ ;; ++ framework) ++ case $host in ++ *-*-darwin*) ++ case "$deplibs " in ++ *" $qarg.ltframework "*) ;; ++ *) deplibs="$deplibs $qarg.ltframework" # this is fixed later ++ ;; ++ esac ++ ;; ++ esac ++ prev= ++ continue ++ ;; ++ inst_prefix) ++ inst_prefix_dir="$arg" ++ prev= ++ continue ++ ;; ++ objectlist) ++ if test -f "$arg"; then ++ save_arg=$arg ++ moreargs= ++ for fil in `cat "$save_arg"` ++ do ++# moreargs="$moreargs $fil" ++ arg=$fil ++ # A libtool-controlled object. + +- # Append the command to remove the reloadable object files +- # to the just-reset $cmds. +- eval cmds=\"\$cmds~\$rm $delfiles\" +- fi +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $show "$cmd" +- $run eval "$cmd" || { +- lt_exit=$? ++ # Check to see that this really is a libtool object. ++ if func_lalib_unsafe_p "$arg"; then ++ pic_object= ++ non_pic_object= + +- # Restore the uninstalled library and exit +- if test "$mode" = relink; then +- $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' +- fi ++ # Read the .lo file ++ func_source "$arg" + +- exit $lt_exit +- } +- done +- IFS="$save_ifs" ++ if test -z "$pic_object" || ++ test -z "$non_pic_object" || ++ test "$pic_object" = none && ++ test "$non_pic_object" = none; then ++ func_fatal_error "cannot find name of object for \`$arg'" ++ fi + +- # Restore the uninstalled library and exit +- if test "$mode" = relink; then +- $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? ++ # Extract subdirectory from the argument. ++ func_dirname "$arg" "/" "" ++ xdir="$func_dirname_result" + +- if test -n "$convenience"; then +- if test -z "$whole_archive_flag_spec"; then +- $show "${rm}r $gentop" +- $run ${rm}r "$gentop" +- fi +- fi ++ if test "$pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ pic_object="$xdir$pic_object" + +- exit $EXIT_SUCCESS +- fi ++ if test "$prev" = dlfiles; then ++ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then ++ dlfiles="$dlfiles $pic_object" ++ prev= ++ continue ++ else ++ # If libtool objects are unsupported, then we need to preload. ++ prev=dlprefiles ++ fi ++ fi + +- # Create links to the real library. +- for linkname in $linknames; do +- if test "$realname" != "$linkname"; then +- $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" +- $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? +- fi +- done ++ # CHECK ME: I think I busted this. -Ossama ++ if test "$prev" = dlprefiles; then ++ # Preload the old-style object. ++ dlprefiles="$dlprefiles $pic_object" ++ prev= ++ fi + +- # If -module or -export-dynamic was specified, set the dlname. +- if test "$module" = yes || test "$export_dynamic" = yes; then +- # On all known operating systems, these are identical. +- dlname="$soname" +- fi +- fi +- ;; ++ # A PIC object. ++ func_append libobjs " $pic_object" ++ arg="$pic_object" ++ fi + +- obj) +- if test -n "$deplibs"; then +- $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 +- fi ++ # Non-PIC object. ++ if test "$non_pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ non_pic_object="$xdir$non_pic_object" + +- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then +- $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 +- fi ++ # A standard non-PIC object ++ func_append non_pic_objects " $non_pic_object" ++ if test -z "$pic_object" || test "$pic_object" = none ; then ++ arg="$non_pic_object" ++ fi ++ else ++ # If the PIC object exists, use it instead. ++ # $xdir was prepended to $pic_object above. ++ non_pic_object="$pic_object" ++ func_append non_pic_objects " $non_pic_object" ++ fi ++ else ++ # Only an error if not doing a dry-run. ++ if $opt_dry_run; then ++ # Extract subdirectory from the argument. ++ func_dirname "$arg" "/" "" ++ xdir="$func_dirname_result" + +- if test -n "$rpath"; then +- $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 +- fi ++ func_lo2o "$arg" ++ pic_object=$xdir$objdir/$func_lo2o_result ++ non_pic_object=$xdir$func_lo2o_result ++ func_append libobjs " $pic_object" ++ func_append non_pic_objects " $non_pic_object" ++ else ++ func_fatal_error "\`$arg' is not a valid libtool object" ++ fi ++ fi ++ done ++ else ++ func_fatal_error "link input file \`$arg' does not exist" ++ fi ++ arg=$save_arg ++ prev= ++ continue ++ ;; ++ precious_regex) ++ precious_files_regex="$arg" ++ prev= ++ continue ++ ;; ++ release) ++ release="-$arg" ++ prev= ++ continue ++ ;; ++ rpath | xrpath) ++ # We need an absolute path. ++ case $arg in ++ [\\/]* | [A-Za-z]:[\\/]*) ;; ++ *) ++ func_fatal_error "only absolute run-paths are allowed" ++ ;; ++ esac ++ if test "$prev" = rpath; then ++ case "$rpath " in ++ *" $arg "*) ;; ++ *) rpath="$rpath $arg" ;; ++ esac ++ else ++ case "$xrpath " in ++ *" $arg "*) ;; ++ *) xrpath="$xrpath $arg" ;; ++ esac ++ fi ++ prev= ++ continue ++ ;; ++ shrext) ++ shrext_cmds="$arg" ++ prev= ++ continue ++ ;; ++ weak) ++ weak_libs="$weak_libs $arg" ++ prev= ++ continue ++ ;; ++ xcclinker) ++ linker_flags="$linker_flags $qarg" ++ compiler_flags="$compiler_flags $qarg" ++ prev= ++ func_append compile_command " $qarg" ++ func_append finalize_command " $qarg" ++ continue ++ ;; ++ xcompiler) ++ compiler_flags="$compiler_flags $qarg" ++ prev= ++ func_append compile_command " $qarg" ++ func_append finalize_command " $qarg" ++ continue ++ ;; ++ xlinker) ++ linker_flags="$linker_flags $qarg" ++ compiler_flags="$compiler_flags $wl$qarg" ++ prev= ++ func_append compile_command " $wl$qarg" ++ func_append finalize_command " $wl$qarg" ++ continue ++ ;; ++ *) ++ eval "$prev=\"\$arg\"" ++ prev= ++ continue ++ ;; ++ esac ++ fi # test -n "$prev" + +- if test -n "$xrpath"; then +- $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 +- fi ++ prevarg="$arg" + +- if test -n "$vinfo"; then +- $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 +- fi ++ case $arg in ++ -all-static) ++ if test -n "$link_static_flag"; then ++ # See comment for -static flag below, for more details. ++ func_append compile_command " $link_static_flag" ++ func_append finalize_command " $link_static_flag" ++ fi ++ continue ++ ;; + +- if test -n "$release"; then +- $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 +- fi ++ -allow-undefined) ++ # FIXME: remove this flag sometime in the future. ++ func_fatal_error "\`-allow-undefined' must not be used because it is the default" ++ ;; + +- case $output in +- *.lo) +- if test -n "$objs$old_deplibs"; then +- $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 +- exit $EXIT_FAILURE +- fi +- libobj="$output" +- obj=`$echo "X$output" | $Xsed -e "$lo2o"` ++ -avoid-version) ++ avoid_version=yes ++ continue + ;; +- *) +- libobj= +- obj="$output" ++ ++ -dlopen) ++ prev=dlfiles ++ continue + ;; +- esac + +- # Delete the old objects. +- $run $rm $obj $libobj ++ -dlpreopen) ++ prev=dlprefiles ++ continue ++ ;; + +- # Objects from convenience libraries. This assumes +- # single-version convenience libraries. Whenever we create +- # different ones for PIC/non-PIC, this we'll have to duplicate +- # the extraction. +- reload_conv_objs= +- gentop= +- # reload_cmds runs $LD directly, so let us get rid of +- # -Wl from whole_archive_flag_spec and hope we can get by with +- # turning comma into space.. +- wl= ++ -export-dynamic) ++ export_dynamic=yes ++ continue ++ ;; + +- if test -n "$convenience"; then +- if test -n "$whole_archive_flag_spec"; then +- eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" +- reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` ++ -export-symbols | -export-symbols-regex) ++ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then ++ func_fatal_error "more than one -exported-symbols argument is not allowed" ++ fi ++ if test "X$arg" = "X-export-symbols"; then ++ prev=expsyms + else +- gentop="$output_objdir/${obj}x" +- generated="$generated $gentop" +- +- func_extract_archives $gentop $convenience +- reload_conv_objs="$reload_objs $func_extract_archives_result" ++ prev=expsyms_regex + fi +- fi ++ continue ++ ;; + +- # Create the old-style object. +- reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test ++ -framework) ++ prev=framework ++ continue ++ ;; + +- output="$obj" +- cmds=$reload_cmds +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done +- IFS="$save_ifs" ++ -inst-prefix-dir) ++ prev=inst_prefix ++ continue ++ ;; + +- # Exit if we aren't doing a library object file. +- if test -z "$libobj"; then +- if test -n "$gentop"; then +- $show "${rm}r $gentop" +- $run ${rm}r $gentop +- fi ++ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* ++ # so, if we see these flags be careful not to treat them like -L ++ -L[A-Z][A-Z]*:*) ++ case $with_gcc/$host in ++ no/*-*-irix* | /*-*-irix*) ++ func_append compile_command " $arg" ++ func_append finalize_command " $arg" ++ ;; ++ esac ++ continue ++ ;; + +- exit $EXIT_SUCCESS +- fi ++ -L*) ++ func_stripname '-L' '' "$arg" ++ dir=$func_stripname_result ++ # We need an absolute path. ++ case $dir in ++ [\\/]* | [A-Za-z]:[\\/]*) ;; ++ *) ++ absdir=`cd "$dir" && pwd` ++ test -z "$absdir" && \ ++ func_fatal_error "cannot determine absolute directory name of \`$dir'" ++ dir="$absdir" ++ ;; ++ esac ++ case "$deplibs " in ++ *" -L$dir "*) ;; ++ *) ++ deplibs="$deplibs -L$dir" ++ lib_search_path="$lib_search_path $dir" ++ ;; ++ esac ++ case $host in ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) ++ testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'` ++ case :$dllsearchpath: in ++ *":$dir:"*) ;; ++ *) dllsearchpath="$dllsearchpath:$dir";; ++ esac ++ case :$dllsearchpath: in ++ *":$testbindir:"*) ;; ++ *) dllsearchpath="$dllsearchpath:$testbindir";; ++ esac ++ ;; ++ esac ++ continue ++ ;; + +- if test "$build_libtool_libs" != yes; then +- if test -n "$gentop"; then +- $show "${rm}r $gentop" +- $run ${rm}r $gentop ++ -l*) ++ if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then ++ case $host in ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*) ++ # These systems don't actually have a C or math library (as such) ++ continue ++ ;; ++ *-*-os2*) ++ # These systems don't actually have a C library (as such) ++ test "X$arg" = "X-lc" && continue ++ ;; ++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) ++ # Do not include libc due to us having libc/libc_r. ++ test "X$arg" = "X-lc" && continue ++ ;; ++ *-*-rhapsody* | *-*-darwin1.[012]) ++ # Rhapsody C and math libraries are in the System framework ++ deplibs="$deplibs System.ltframework" ++ continue ++ ;; ++ *-*-sco3.2v5* | *-*-sco5v6*) ++ # Causes problems with __ctype ++ test "X$arg" = "X-lc" && continue ++ ;; ++ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) ++ # Compiler inserts libc in the correct place for threads to work ++ test "X$arg" = "X-lc" && continue ++ ;; ++ esac ++ elif test "X$arg" = "X-lc_r"; then ++ case $host in ++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) ++ # Do not include libc_r directly, use -pthread flag. ++ continue ++ ;; ++ esac + fi ++ deplibs="$deplibs $arg" ++ continue ++ ;; + +- # Create an invalid libtool object if no PIC, so that we don't +- # accidentally link it into a program. +- # $show "echo timestamp > $libobj" +- # $run eval "echo timestamp > $libobj" || exit $? +- exit $EXIT_SUCCESS +- fi ++ -module) ++ module=yes ++ continue ++ ;; + +- if test -n "$pic_flag" || test "$pic_mode" != default; then +- # Only do commands if we really have different PIC objects. +- reload_objs="$libobjs $reload_conv_objs" +- output="$libobj" +- cmds=$reload_cmds +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done +- IFS="$save_ifs" +- fi ++ # Tru64 UNIX uses -model [arg] to determine the layout of C++ ++ # classes, name mangling, and exception handling. ++ # Darwin uses the -arch flag to determine output architecture. ++ -model|-arch|-isysroot) ++ compiler_flags="$compiler_flags $arg" ++ func_append compile_command " $arg" ++ func_append finalize_command " $arg" ++ prev=xcompiler ++ continue ++ ;; + +- if test -n "$gentop"; then +- $show "${rm}r $gentop" +- $run ${rm}r $gentop +- fi ++ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) ++ compiler_flags="$compiler_flags $arg" ++ func_append compile_command " $arg" ++ func_append finalize_command " $arg" ++ case "$new_inherited_linker_flags " in ++ *" $arg "*) ;; ++ * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;; ++ esac ++ continue ++ ;; + +- exit $EXIT_SUCCESS +- ;; ++ -multi_module) ++ single_module="${wl}-multi_module" ++ continue ++ ;; + +- prog) +- case $host in +- *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; +- esac +- if test -n "$vinfo"; then +- $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 +- fi ++ -no-fast-install) ++ fast_install=no ++ continue ++ ;; + +- if test -n "$release"; then +- $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 +- fi ++ -no-install) ++ case $host in ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*) ++ # The PATH hackery in wrapper scripts is required on Windows ++ # and Darwin in order for the loader to find any dlls it needs. ++ func_warning "\`-no-install' is ignored for $host" ++ func_warning "assuming \`-no-fast-install' instead" ++ fast_install=no ++ ;; ++ *) no_install=yes ;; ++ esac ++ continue ++ ;; + +- if test "$preload" = yes; then +- if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && +- test "$dlopen_self_static" = unknown; then +- $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." +- fi +- fi ++ -no-undefined) ++ allow_undefined=no ++ continue ++ ;; + +- case $host in +- *-*-rhapsody* | *-*-darwin1.[012]) +- # On Rhapsody replace the C library is the System framework +- compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` +- finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` ++ -objectlist) ++ prev=objectlist ++ continue + ;; +- esac + +- case $host in +- *darwin*) +- # Don't allow lazy linking, it breaks C++ global constructors +- if test "$tagname" = CXX ; then +- compile_command="$compile_command ${wl}-bind_at_load" +- finalize_command="$finalize_command ${wl}-bind_at_load" +- fi +- ;; +- esac ++ -o) prev=output ;; + ++ -precious-files-regex) ++ prev=precious_regex ++ continue ++ ;; + +- # move library search paths that coincide with paths to not yet +- # installed libraries to the beginning of the library search list +- new_libs= +- for path in $notinst_path; do +- case " $new_libs " in +- *" -L$path/$objdir "*) ;; ++ -release) ++ prev=release ++ continue ++ ;; ++ ++ -rpath) ++ prev=rpath ++ continue ++ ;; ++ ++ -R) ++ prev=xrpath ++ continue ++ ;; ++ ++ -R*) ++ func_stripname '-R' '' "$arg" ++ dir=$func_stripname_result ++ # We need an absolute path. ++ case $dir in ++ [\\/]* | [A-Za-z]:[\\/]*) ;; + *) +- case " $compile_deplibs " in +- *" -L$path/$objdir "*) +- new_libs="$new_libs -L$path/$objdir" ;; +- esac ++ func_fatal_error "only absolute run-paths are allowed" + ;; + esac +- done +- for deplib in $compile_deplibs; do +- case $deplib in +- -L*) +- case " $new_libs " in +- *" $deplib "*) ;; +- *) new_libs="$new_libs $deplib" ;; +- esac +- ;; +- *) new_libs="$new_libs $deplib" ;; ++ case "$xrpath " in ++ *" $dir "*) ;; ++ *) xrpath="$xrpath $dir" ;; + esac +- done +- compile_deplibs="$new_libs" +- ++ continue ++ ;; + +- compile_command="$compile_command $compile_deplibs" +- finalize_command="$finalize_command $finalize_deplibs" ++ -shared) ++ # The effects of -shared are defined in a previous loop. ++ continue ++ ;; + +- if test -n "$rpath$xrpath"; then +- # If the user specified any rpath flags, then add them. +- for libdir in $rpath $xrpath; do +- # This is the magic to use -rpath. +- case "$finalize_rpath " in +- *" $libdir "*) ;; +- *) finalize_rpath="$finalize_rpath $libdir" ;; +- esac +- done +- fi ++ -shrext) ++ prev=shrext ++ continue ++ ;; + +- # Now hardcode the library paths +- rpath= +- hardcode_libdirs= +- for libdir in $compile_rpath $finalize_rpath; do +- if test -n "$hardcode_libdir_flag_spec"; then +- if test -n "$hardcode_libdir_separator"; then +- if test -z "$hardcode_libdirs"; then +- hardcode_libdirs="$libdir" +- else +- # Just accumulate the unique libdirs. +- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in +- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) +- ;; +- *) +- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" +- ;; +- esac +- fi +- else +- eval flag=\"$hardcode_libdir_flag_spec\" +- rpath="$rpath $flag" +- fi +- elif test -n "$runpath_var"; then +- case "$perm_rpath " in +- *" $libdir "*) ;; +- *) perm_rpath="$perm_rpath $libdir" ;; +- esac +- fi +- case $host in +- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) +- testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'` +- case :$dllsearchpath: in +- *":$libdir:"*) ;; +- *) dllsearchpath="$dllsearchpath:$libdir";; +- esac +- case :$dllsearchpath: in +- *":$testbindir:"*) ;; +- *) dllsearchpath="$dllsearchpath:$testbindir";; +- esac +- ;; +- esac +- done +- # Substitute the hardcoded libdirs into the rpath. +- if test -n "$hardcode_libdir_separator" && +- test -n "$hardcode_libdirs"; then +- libdir="$hardcode_libdirs" +- eval rpath=\" $hardcode_libdir_flag_spec\" +- fi +- compile_rpath="$rpath" ++ -static | -static-libtool-libs) ++ # The effects of -static are defined in a previous loop. ++ # We used to do the same as -all-static on platforms that ++ # didn't have a PIC flag, but the assumption that the effects ++ # would be equivalent was wrong. It would break on at least ++ # Digital Unix and AIX. ++ continue ++ ;; + +- rpath= +- hardcode_libdirs= +- for libdir in $finalize_rpath; do +- if test -n "$hardcode_libdir_flag_spec"; then +- if test -n "$hardcode_libdir_separator"; then +- if test -z "$hardcode_libdirs"; then +- hardcode_libdirs="$libdir" +- else +- # Just accumulate the unique libdirs. +- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in +- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) +- ;; +- *) +- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" +- ;; +- esac +- fi +- else +- eval flag=\"$hardcode_libdir_flag_spec\" +- rpath="$rpath $flag" +- fi +- elif test -n "$runpath_var"; then +- case "$finalize_perm_rpath " in +- *" $libdir "*) ;; +- *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; +- esac +- fi +- done +- # Substitute the hardcoded libdirs into the rpath. +- if test -n "$hardcode_libdir_separator" && +- test -n "$hardcode_libdirs"; then +- libdir="$hardcode_libdirs" +- eval rpath=\" $hardcode_libdir_flag_spec\" +- fi +- finalize_rpath="$rpath" ++ -thread-safe) ++ thread_safe=yes ++ continue ++ ;; + +- if test -n "$libobjs" && test "$build_old_libs" = yes; then +- # Transform all the library objects into standard objects. +- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` +- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` +- fi ++ -version-info) ++ prev=vinfo ++ continue ++ ;; + +- dlsyms= +- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then +- if test -n "$NM" && test -n "$global_symbol_pipe"; then +- dlsyms="${outputname}S.c" +- else +- $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 +- fi +- fi ++ -version-number) ++ prev=vinfo ++ vinfo_number=yes ++ continue ++ ;; ++ ++ -weak) ++ prev=weak ++ continue ++ ;; + +- if test -n "$dlsyms"; then +- case $dlsyms in +- "") ;; +- *.c) +- # Discover the nlist of each of the dlfiles. +- nlist="$output_objdir/${outputname}.nm" ++ -Wc,*) ++ func_stripname '-Wc,' '' "$arg" ++ args=$func_stripname_result ++ arg= ++ save_ifs="$IFS"; IFS=',' ++ for flag in $args; do ++ IFS="$save_ifs" ++ func_quote_for_eval "$flag" ++ arg="$arg $wl$func_quote_for_eval_result" ++ compiler_flags="$compiler_flags $func_quote_for_eval_result" ++ done ++ IFS="$save_ifs" ++ func_stripname ' ' '' "$arg" ++ arg=$func_stripname_result ++ ;; + +- $show "$rm $nlist ${nlist}S ${nlist}T" +- $run $rm "$nlist" "${nlist}S" "${nlist}T" ++ -Wl,*) ++ func_stripname '-Wl,' '' "$arg" ++ args=$func_stripname_result ++ arg= ++ save_ifs="$IFS"; IFS=',' ++ for flag in $args; do ++ IFS="$save_ifs" ++ func_quote_for_eval "$flag" ++ arg="$arg $wl$func_quote_for_eval_result" ++ compiler_flags="$compiler_flags $wl$func_quote_for_eval_result" ++ linker_flags="$linker_flags $func_quote_for_eval_result" ++ done ++ IFS="$save_ifs" ++ func_stripname ' ' '' "$arg" ++ arg=$func_stripname_result ++ ;; + +- # Parse the name list into a source file. +- $show "creating $output_objdir/$dlsyms" ++ -Xcompiler) ++ prev=xcompiler ++ continue ++ ;; + +- test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ +-/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ +-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ ++ -Xlinker) ++ prev=xlinker ++ continue ++ ;; + +-#ifdef __cplusplus +-extern \"C\" { +-#endif ++ -XCClinker) ++ prev=xcclinker ++ continue ++ ;; + +-/* Prevent the only kind of declaration conflicts we can make. */ +-#define lt_preloaded_symbols some_other_symbol ++ # -msg_* for osf cc ++ -msg_*) ++ func_quote_for_eval "$arg" ++ arg="$func_quote_for_eval_result" ++ ;; + +-/* External symbol declarations for the compiler. */\ +-" ++ # -64, -mips[0-9] enable 64-bit mode on the SGI compiler ++ # -r[0-9][0-9]* specifies the processor on the SGI compiler ++ # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler ++ # +DA*, +DD* enable 64-bit mode on the HP compiler ++ # -q* pass through compiler args for the IBM compiler ++ # -m*, -t[45]*, -txscale* pass through architecture-specific ++ # compiler args for GCC ++ # -F/path gives path to uninstalled frameworks, gcc on darwin ++ # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC ++ # @file GCC response files ++ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ ++ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) ++ func_quote_for_eval "$arg" ++ arg="$func_quote_for_eval_result" ++ func_append compile_command " $arg" ++ func_append finalize_command " $arg" ++ compiler_flags="$compiler_flags $arg" ++ continue ++ ;; + +- if test "$dlself" = yes; then +- $show "generating symbol list for \`$output'" ++ # Some other compiler flag. ++ -* | +*) ++ func_quote_for_eval "$arg" ++ arg="$func_quote_for_eval_result" ++ ;; + +- test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" ++ *.$objext) ++ # A standard object. ++ objs="$objs $arg" ++ ;; + +- # Add our own program objects to the symbol list. +- progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` +- for arg in $progfiles; do +- $show "extracting global C symbols from \`$arg'" +- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" +- done ++ *.lo) ++ # A libtool-controlled object. + +- if test -n "$exclude_expsyms"; then +- $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' +- $run eval '$mv "$nlist"T "$nlist"' +- fi +- +- if test -n "$export_symbols_regex"; then +- $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' +- $run eval '$mv "$nlist"T "$nlist"' +- fi +- +- # Prepare the list of exported symbols +- if test -z "$export_symbols"; then +- export_symbols="$output_objdir/$outputname.exp" +- $run $rm $export_symbols +- $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' +- case $host in +- *cygwin* | *mingw* ) +- $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' +- $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' +- ;; +- esac +- else +- $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' +- $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' +- $run eval 'mv "$nlist"T "$nlist"' +- case $host in +- *cygwin* | *mingw* ) +- $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' +- $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' +- ;; +- esac +- fi ++ # Check to see that this really is a libtool object. ++ if func_lalib_unsafe_p "$arg"; then ++ pic_object= ++ non_pic_object= ++ ++ # Read the .lo file ++ func_source "$arg" ++ ++ if test -z "$pic_object" || ++ test -z "$non_pic_object" || ++ test "$pic_object" = none && ++ test "$non_pic_object" = none; then ++ func_fatal_error "cannot find name of object for \`$arg'" + fi + +- for arg in $dlprefiles; do +- $show "extracting global C symbols from \`$arg'" +- name=`$echo "$arg" | ${SED} -e 's%^.*/%%'` +- $run eval '$echo ": $name " >> "$nlist"' +- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" +- done ++ # Extract subdirectory from the argument. ++ func_dirname "$arg" "/" "" ++ xdir="$func_dirname_result" + +- if test -z "$run"; then +- # Make sure we have at least an empty file. +- test -f "$nlist" || : > "$nlist" +- +- if test -n "$exclude_expsyms"; then +- $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T +- $mv "$nlist"T "$nlist" +- fi ++ if test "$pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ pic_object="$xdir$pic_object" + +- # Try sorting and uniquifying the output. +- if grep -v "^: " < "$nlist" | +- if sort -k 3 /dev/null 2>&1; then +- sort -k 3 +- else +- sort +2 +- fi | +- uniq > "$nlist"S; then +- : +- else +- grep -v "^: " < "$nlist" > "$nlist"S ++ if test "$prev" = dlfiles; then ++ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then ++ dlfiles="$dlfiles $pic_object" ++ prev= ++ continue ++ else ++ # If libtool objects are unsupported, then we need to preload. ++ prev=dlprefiles ++ fi + fi + +- if test -f "$nlist"S; then +- eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' +- else +- $echo '/* NONE */' >> "$output_objdir/$dlsyms" ++ # CHECK ME: I think I busted this. -Ossama ++ if test "$prev" = dlprefiles; then ++ # Preload the old-style object. ++ dlprefiles="$dlprefiles $pic_object" ++ prev= + fi + +- $echo >> "$output_objdir/$dlsyms" "\ +- +-#undef lt_preloaded_symbols +- +-#if defined (__STDC__) && __STDC__ +-# define lt_ptr void * +-#else +-# define lt_ptr char * +-# define const +-#endif ++ # A PIC object. ++ func_append libobjs " $pic_object" ++ arg="$pic_object" ++ fi + +-/* The mapping between symbol names and symbols. */ +-" ++ # Non-PIC object. ++ if test "$non_pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ non_pic_object="$xdir$non_pic_object" + +- case $host in +- *cygwin* | *mingw* ) +- $echo >> "$output_objdir/$dlsyms" "\ +-/* DATA imports from DLLs on WIN32 can't be const, because +- runtime relocations are performed -- see ld's documentation +- on pseudo-relocs */ +-struct { +-" +- ;; +- * ) +- $echo >> "$output_objdir/$dlsyms" "\ +-const struct { +-" +- ;; +- esac ++ # A standard non-PIC object ++ func_append non_pic_objects " $non_pic_object" ++ if test -z "$pic_object" || test "$pic_object" = none ; then ++ arg="$non_pic_object" ++ fi ++ else ++ # If the PIC object exists, use it instead. ++ # $xdir was prepended to $pic_object above. ++ non_pic_object="$pic_object" ++ func_append non_pic_objects " $non_pic_object" ++ fi ++ else ++ # Only an error if not doing a dry-run. ++ if $opt_dry_run; then ++ # Extract subdirectory from the argument. ++ func_dirname "$arg" "/" "" ++ xdir="$func_dirname_result" + ++ func_lo2o "$arg" ++ pic_object=$xdir$objdir/$func_lo2o_result ++ non_pic_object=$xdir$func_lo2o_result ++ func_append libobjs " $pic_object" ++ func_append non_pic_objects " $non_pic_object" ++ else ++ func_fatal_error "\`$arg' is not a valid libtool object" ++ fi ++ fi ++ ;; + +- $echo >> "$output_objdir/$dlsyms" "\ +- const char *name; +- lt_ptr address; +-} +-lt_preloaded_symbols[] = +-{\ +-" ++ *.$libext) ++ # An archive. ++ deplibs="$deplibs $arg" ++ old_deplibs="$old_deplibs $arg" ++ continue ++ ;; + +- eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" ++ *.la) ++ # A libtool-controlled library. + +- $echo >> "$output_objdir/$dlsyms" "\ +- {0, (lt_ptr) 0} +-}; ++ if test "$prev" = dlfiles; then ++ # This library was specified with -dlopen. ++ dlfiles="$dlfiles $arg" ++ prev= ++ elif test "$prev" = dlprefiles; then ++ # The library was specified with -dlpreopen. ++ dlprefiles="$dlprefiles $arg" ++ prev= ++ else ++ deplibs="$deplibs $arg" ++ fi ++ continue ++ ;; + +-/* This works around a problem in FreeBSD linker */ +-#ifdef FREEBSD_WORKAROUND +-static const void *lt_preloaded_setup() { +- return lt_preloaded_symbols; +-} +-#endif ++ # Some other compiler argument. ++ *) ++ # Unknown arguments in both finalize_command and compile_command need ++ # to be aesthetically quoted because they are evaled later. ++ func_quote_for_eval "$arg" ++ arg="$func_quote_for_eval_result" ++ ;; ++ esac # arg + +-#ifdef __cplusplus +-} +-#endif\ +-" +- fi ++ # Now actually substitute the argument into the commands. ++ if test -n "$arg"; then ++ func_append compile_command " $arg" ++ func_append finalize_command " $arg" ++ fi ++ done # argument parsing loop + +- pic_flag_for_symtable= +- case $host in +- # compiling the symbol table file with pic_flag works around +- # a FreeBSD bug that causes programs to crash when -lm is +- # linked before any other PIC object. But we must not use +- # pic_flag when linking with -static. The problem exists in +- # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. +- *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) +- case "$compile_command " in +- *" -static "*) ;; +- *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";; +- esac;; +- *-*-hpux*) +- case "$compile_command " in +- *" -static "*) ;; +- *) pic_flag_for_symtable=" $pic_flag";; +- esac +- esac ++ test -n "$prev" && \ ++ func_fatal_help "the \`$prevarg' option requires an argument" + +- # Now compile the dynamic symbol file. +- $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" +- $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? +- +- # Clean up the generated files. +- $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" +- $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" +- +- # Transform the symbol file into the correct name. +- case $host in +- *cygwin* | *mingw* ) +- if test -f "$output_objdir/${outputname}.def" ; then +- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP` +- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP` +- else +- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` +- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` +- fi +- ;; +- * ) +- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` +- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` +- ;; +- esac +- ;; +- *) +- $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac +- else +- # We keep going just in case the user didn't refer to +- # lt_preloaded_symbols. The linker will fail if global_symbol_pipe +- # really was required. ++ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then ++ eval arg=\"$export_dynamic_flag_spec\" ++ func_append compile_command " $arg" ++ func_append finalize_command " $arg" ++ fi + +- # Nullify the symbol file. +- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP` +- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP` +- fi ++ oldlibs= ++ # calculate the name of the file, without its directory ++ func_basename "$output" ++ outputname="$func_basename_result" ++ libobjs_save="$libobjs" + +- if test "$need_relink" = no || test "$build_libtool_libs" != yes; then +- # Replace the output file specification. +- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP` +- link_command="$compile_command$compile_rpath" ++ if test -n "$shlibpath_var"; then ++ # get the directories listed in $shlibpath_var ++ eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` ++ else ++ shlib_search_path= ++ fi ++ eval sys_lib_search_path=\"$sys_lib_search_path_spec\" ++ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + +- # We have no uninstalled library dependencies, so finalize right now. +- $show "$link_command" +- $run eval "$link_command" +- exit_status=$? ++ func_dirname "$output" "/" "" ++ output_objdir="$func_dirname_result$objdir" ++ # Create the object directory. ++ func_mkdir_p "$output_objdir" + +- # Delete the generated files. +- if test -n "$dlsyms"; then +- $show "$rm $output_objdir/${outputname}S.${objext}" +- $run $rm "$output_objdir/${outputname}S.${objext}" +- fi ++ # Determine the type of output ++ case $output in ++ "") ++ func_fatal_help "you must specify an output file" ++ ;; ++ *.$libext) linkmode=oldlib ;; ++ *.lo | *.$objext) linkmode=obj ;; ++ *.la) linkmode=lib ;; ++ *) linkmode=prog ;; # Anything else should be a program. ++ esac + +- exit $exit_status ++ specialdeplibs= ++ ++ libs= ++ # Find all interdependent deplibs by searching for libraries ++ # that are linked more than once (e.g. -la -lb -la) ++ for deplib in $deplibs; do ++ if $opt_duplicate_deps ; then ++ case "$libs " in ++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; ++ esac + fi ++ libs="$libs $deplib" ++ done + +- if test -n "$shlibpath_var"; then +- # We should set the shlibpath_var +- rpath= +- for dir in $temp_rpath; do +- case $dir in +- [\\/]* | [A-Za-z]:[\\/]*) +- # Absolute path. +- rpath="$rpath$dir:" +- ;; ++ if test "$linkmode" = lib; then ++ libs="$predeps $libs $compiler_lib_search_path $postdeps" ++ ++ # Compute libraries that are listed more than once in $predeps ++ # $postdeps and mark them as special (i.e., whose duplicates are ++ # not to be eliminated). ++ pre_post_deps= ++ if $opt_duplicate_compiler_generated_deps; then ++ for pre_post_dep in $predeps $postdeps; do ++ case "$pre_post_deps " in ++ *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; ++ esac ++ pre_post_deps="$pre_post_deps $pre_post_dep" ++ done ++ fi ++ pre_post_deps= ++ fi ++ ++ deplibs= ++ newdependency_libs= ++ newlib_search_path= ++ need_relink=no # whether we're linking any uninstalled libtool libraries ++ notinst_deplibs= # not-installed libtool libraries ++ notinst_path= # paths that contain not-installed libtool libraries ++ ++ case $linkmode in ++ lib) ++ passes="conv dlpreopen link" ++ for file in $dlfiles $dlprefiles; do ++ case $file in ++ *.la) ;; + *) +- # Relative path: add a thisdir entry. +- rpath="$rpath\$thisdir/$dir:" ++ func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" + ;; + esac + done +- temp_rpath="$rpath" ++ ;; ++ prog) ++ compile_deplibs= ++ finalize_deplibs= ++ alldeplibs=no ++ newdlfiles= ++ newdlprefiles= ++ passes="conv scan dlopen dlpreopen link" ++ ;; ++ *) passes="conv" ++ ;; ++ esac ++ ++ for pass in $passes; do ++ # The preopen pass in lib mode reverses $deplibs; put it back here ++ # so that -L comes before libs that need it for instance... ++ if test "$linkmode,$pass" = "lib,link"; then ++ ## FIXME: Find the place where the list is rebuilt in the wrong ++ ## order, and fix it there properly ++ tmp_deplibs= ++ for deplib in $deplibs; do ++ tmp_deplibs="$deplib $tmp_deplibs" ++ done ++ deplibs="$tmp_deplibs" + fi + +- if test -n "$compile_shlibpath$finalize_shlibpath"; then +- compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" ++ if test "$linkmode,$pass" = "lib,link" || ++ test "$linkmode,$pass" = "prog,scan"; then ++ libs="$deplibs" ++ deplibs= + fi +- if test -n "$finalize_shlibpath"; then +- finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" ++ if test "$linkmode" = prog; then ++ case $pass in ++ dlopen) libs="$dlfiles" ;; ++ dlpreopen) libs="$dlprefiles" ;; ++ link) ++ libs="$deplibs %DEPLIBS%" ++ test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" ++ ;; ++ esac + fi ++ if test "$linkmode,$pass" = "lib,dlpreopen"; then ++ # Collect and forward deplibs of preopened libtool libs ++ for lib in $dlprefiles; do ++ # Ignore non-libtool-libs ++ dependency_libs= ++ case $lib in ++ *.la) func_source "$lib" ;; ++ esac + +- compile_var= +- finalize_var= +- if test -n "$runpath_var"; then +- if test -n "$perm_rpath"; then +- # We should set the runpath_var. +- rpath= +- for dir in $perm_rpath; do +- rpath="$rpath$dir:" +- done +- compile_var="$runpath_var=\"$rpath\$$runpath_var\" " +- fi +- if test -n "$finalize_perm_rpath"; then +- # We should set the runpath_var. +- rpath= +- for dir in $finalize_perm_rpath; do +- rpath="$rpath$dir:" ++ # Collect preopened libtool deplibs, except any this library ++ # has declared as weak libs ++ for deplib in $dependency_libs; do ++ deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"` ++ case " $weak_libs " in ++ *" $deplib_base "*) ;; ++ *) deplibs="$deplibs $deplib" ;; ++ esac + done +- finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " +- fi ++ done ++ libs="$dlprefiles" + fi +- +- if test "$no_install" = yes; then +- # We don't need to create a wrapper script. +- link_command="$compile_var$compile_command$compile_rpath" +- # Replace the output file specification. +- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` +- # Delete the old output file. +- $run $rm $output +- # Link the executable and exit +- $show "$link_command" +- $run eval "$link_command" || exit $? +- exit $EXIT_SUCCESS ++ if test "$pass" = dlopen; then ++ # Collect dlpreopened libraries ++ save_deplibs="$deplibs" ++ deplibs= + fi + +- if test "$hardcode_action" = relink; then +- # Fast installation is not supported +- link_command="$compile_var$compile_command$compile_rpath" +- relink_command="$finalize_var$finalize_command$finalize_rpath" +- +- $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 +- $echo "$modename: \`$output' will be relinked during installation" 1>&2 +- else +- if test "$fast_install" != no; then +- link_command="$finalize_var$compile_command$finalize_rpath" +- if test "$fast_install" = yes; then +- relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP` ++ for deplib in $libs; do ++ lib= ++ found=no ++ case $deplib in ++ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" + else +- # fast_install is set to needless +- relink_command= ++ compiler_flags="$compiler_flags $deplib" ++ if test "$linkmode" = lib ; then ++ case "$new_inherited_linker_flags " in ++ *" $deplib "*) ;; ++ * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; ++ esac ++ fi + fi +- else +- link_command="$compile_var$compile_command$compile_rpath" +- relink_command="$finalize_var$finalize_command$finalize_rpath" +- fi +- fi +- +- # Replace the output file specification. +- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` +- +- # Delete the old output files. +- $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname +- +- $show "$link_command" +- $run eval "$link_command" || exit $? +- +- # Now create the wrapper script. +- $show "creating $output" +- +- # Quote the relink command for shipping. +- if test -n "$relink_command"; then +- # Preserve any variables that may affect compiler behavior +- for var in $variables_saved_for_relink; do +- if eval test -z \"\${$var+set}\"; then +- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" +- elif eval var_value=\$$var; test -z "$var_value"; then +- relink_command="$var=; export $var; $relink_command" ++ continue ++ ;; ++ -l*) ++ if test "$linkmode" != lib && test "$linkmode" != prog; then ++ func_warning "\`-l' is ignored for archives/objects" ++ continue ++ fi ++ func_stripname '-l' '' "$deplib" ++ name=$func_stripname_result ++ if test "$linkmode" = lib; then ++ searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" + else +- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` +- relink_command="$var=\"$var_value\"; export $var; $relink_command" ++ searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" + fi +- done +- relink_command="(cd `pwd`; $relink_command)" +- relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP` +- fi +- +- # Quote $echo for shipping. +- if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then +- case $progpath in +- [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; +- *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; +- esac +- qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` +- else +- qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` +- fi +- +- # Only actually do things if our run command is non-null. +- if test -z "$run"; then +- # win32 will think the script is a binary if it has +- # a .exe suffix, so we strip it off here. +- case $output in +- *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;; +- esac +- # test for cygwin because mv fails w/o .exe extensions +- case $host in +- *cygwin*) +- exeext=.exe +- outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;; +- *) exeext= ;; +- esac +- case $host in +- *cygwin* | *mingw* ) +- output_name=`basename $output` +- output_path=`dirname $output` +- cwrappersource="$output_path/$objdir/lt-$output_name.c" +- cwrapper="$output_path/$output_name.exe" +- $rm $cwrappersource $cwrapper +- trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 ++ for searchdir in $searchdirs; do ++ for search_ext in .la $std_shrext .so .a; do ++ # Search the libtool library ++ lib="$searchdir/lib${name}${search_ext}" ++ if test -f "$lib"; then ++ if test "$search_ext" = ".la"; then ++ found=yes ++ else ++ found=no ++ fi ++ break 2 ++ fi ++ done ++ done ++ if test "$found" != yes; then ++ # deplib doesn't seem to be a libtool library ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ deplibs="$deplib $deplibs" ++ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" ++ fi ++ continue ++ else # deplib is a libtool library ++ # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, ++ # We need to do some special things here, and not later. ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ case " $predeps $postdeps " in ++ *" $deplib "*) ++ if func_lalib_p "$lib"; then ++ library_names= ++ old_library= ++ func_source "$lib" ++ for l in $old_library $library_names; do ++ ll="$l" ++ done ++ if test "X$ll" = "X$old_library" ; then # only static version available ++ found=no ++ func_dirname "$lib" "" "." ++ ladir="$func_dirname_result" ++ lib=$ladir/$old_library ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ deplibs="$deplib $deplibs" ++ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" ++ fi ++ continue ++ fi ++ fi ++ ;; ++ *) ;; ++ esac ++ fi ++ fi ++ ;; # -l ++ *.ltframework) ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ deplibs="$deplib $deplibs" ++ if test "$linkmode" = lib ; then ++ case "$new_inherited_linker_flags " in ++ *" $deplib "*) ;; ++ * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; ++ esac ++ fi ++ fi ++ continue ++ ;; ++ -L*) ++ case $linkmode in ++ lib) ++ deplibs="$deplib $deplibs" ++ test "$pass" = conv && continue ++ newdependency_libs="$deplib $newdependency_libs" ++ func_stripname '-L' '' "$deplib" ++ newlib_search_path="$newlib_search_path $func_stripname_result" ++ ;; ++ prog) ++ if test "$pass" = conv; then ++ deplibs="$deplib $deplibs" ++ continue ++ fi ++ if test "$pass" = scan; then ++ deplibs="$deplib $deplibs" ++ else ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ fi ++ func_stripname '-L' '' "$deplib" ++ newlib_search_path="$newlib_search_path $func_stripname_result" ++ ;; ++ *) ++ func_warning "\`-L' is ignored for archives/objects" ++ ;; ++ esac # linkmode ++ continue ++ ;; # -L ++ -R*) ++ if test "$pass" = link; then ++ func_stripname '-R' '' "$deplib" ++ dir=$func_stripname_result ++ # Make sure the xrpath contains only unique directories. ++ case "$xrpath " in ++ *" $dir "*) ;; ++ *) xrpath="$xrpath $dir" ;; ++ esac ++ fi ++ deplibs="$deplib $deplibs" ++ continue ++ ;; ++ *.la) lib="$deplib" ;; ++ *.$libext) ++ if test "$pass" = conv; then ++ deplibs="$deplib $deplibs" ++ continue ++ fi ++ case $linkmode in ++ lib) ++ # Linking convenience modules into shared libraries is allowed, ++ # but linking other static libraries is non-portable. ++ case " $dlpreconveniencelibs " in ++ *" $deplib "*) ;; ++ *) ++ valid_a_lib=no ++ case $deplibs_check_method in ++ match_pattern*) ++ set dummy $deplibs_check_method; shift ++ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` ++ if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \ ++ | $EGREP "$match_pattern_regex" > /dev/null; then ++ valid_a_lib=yes ++ fi ++ ;; ++ pass_all) ++ valid_a_lib=yes ++ ;; ++ esac ++ if test "$valid_a_lib" != yes; then ++ $ECHO ++ $ECHO "*** Warning: Trying to link with static lib archive $deplib." ++ $ECHO "*** I have the capability to make that library automatically link in when" ++ $ECHO "*** you link to this library. But I can only do this if you have a" ++ $ECHO "*** shared version of the library, which you do not appear to have" ++ $ECHO "*** because the file extensions .$libext of this argument makes me believe" ++ $ECHO "*** that it is just a static archive that I should not use here." ++ else ++ $ECHO ++ $ECHO "*** Warning: Linking the shared library $output against the" ++ $ECHO "*** static library $deplib is not portable!" ++ deplibs="$deplib $deplibs" ++ fi ++ ;; ++ esac ++ continue ++ ;; ++ prog) ++ if test "$pass" != link; then ++ deplibs="$deplib $deplibs" ++ else ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ fi ++ continue ++ ;; ++ esac # linkmode ++ ;; # *.$libext ++ *.lo | *.$objext) ++ if test "$pass" = conv; then ++ deplibs="$deplib $deplibs" ++ elif test "$linkmode" = prog; then ++ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then ++ # If there is no dlopen support or we're linking statically, ++ # we need to preload. ++ newdlprefiles="$newdlprefiles $deplib" ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ newdlfiles="$newdlfiles $deplib" ++ fi ++ fi ++ continue ++ ;; ++ %DEPLIBS%) ++ alldeplibs=yes ++ continue ++ ;; ++ esac # case $deplib + +- cat > $cwrappersource <> $cwrappersource<<"EOF" +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include + +-#if defined(PATH_MAX) +-# define LT_PATHMAX PATH_MAX +-#elif defined(MAXPATHLEN) +-# define LT_PATHMAX MAXPATHLEN +-#else +-# define LT_PATHMAX 1024 +-#endif ++ # Read the .la file ++ func_source "$lib" + +-#ifndef DIR_SEPARATOR +-# define DIR_SEPARATOR '/' +-# define PATH_SEPARATOR ':' +-#endif ++ # Convert "-framework foo" to "foo.ltframework" ++ if test -n "$inherited_linker_flags"; then ++ tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'` ++ for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do ++ case " $new_inherited_linker_flags " in ++ *" $tmp_inherited_linker_flag "*) ;; ++ *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";; ++ esac ++ done ++ fi ++ dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ++ if test "$linkmode,$pass" = "lib,link" || ++ test "$linkmode,$pass" = "prog,scan" || ++ { test "$linkmode" != prog && test "$linkmode" != lib; }; then ++ test -n "$dlopen" && dlfiles="$dlfiles $dlopen" ++ test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" ++ fi + +-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ +- defined (__OS2__) +-# define HAVE_DOS_BASED_FILE_SYSTEM +-# ifndef DIR_SEPARATOR_2 +-# define DIR_SEPARATOR_2 '\\' +-# endif +-# ifndef PATH_SEPARATOR_2 +-# define PATH_SEPARATOR_2 ';' +-# endif +-#endif ++ if test "$pass" = conv; then ++ # Only check for convenience libraries ++ deplibs="$lib $deplibs" ++ if test -z "$libdir"; then ++ if test -z "$old_library"; then ++ func_fatal_error "cannot find name of link library for \`$lib'" ++ fi ++ # It is a libtool convenience library, so add in its objects. ++ convenience="$convenience $ladir/$objdir/$old_library" ++ old_convenience="$old_convenience $ladir/$objdir/$old_library" ++ elif test "$linkmode" != prog && test "$linkmode" != lib; then ++ func_fatal_error "\`$lib' is not a convenience library" ++ fi ++ tmp_libs= ++ for deplib in $dependency_libs; do ++ deplibs="$deplib $deplibs" ++ if $opt_duplicate_deps ; then ++ case "$tmp_libs " in ++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; ++ esac ++ fi ++ tmp_libs="$tmp_libs $deplib" ++ done ++ continue ++ fi # $pass = conv + +-#ifndef DIR_SEPARATOR_2 +-# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) +-#else /* DIR_SEPARATOR_2 */ +-# define IS_DIR_SEPARATOR(ch) \ +- (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) +-#endif /* DIR_SEPARATOR_2 */ + +-#ifndef PATH_SEPARATOR_2 +-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) +-#else /* PATH_SEPARATOR_2 */ +-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) +-#endif /* PATH_SEPARATOR_2 */ ++ # Get the name of the library we link against. ++ linklib= ++ for l in $old_library $library_names; do ++ linklib="$l" ++ done ++ if test -z "$linklib"; then ++ func_fatal_error "cannot find name of link library for \`$lib'" ++ fi + +-#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) +-#define XFREE(stale) do { \ +- if (stale) { free ((void *) stale); stale = 0; } \ +-} while (0) ++ # This library was specified with -dlopen. ++ if test "$pass" = dlopen; then ++ if test -z "$libdir"; then ++ func_fatal_error "cannot -dlopen a convenience library: \`$lib'" ++ fi ++ if test -z "$dlname" || ++ test "$dlopen_support" != yes || ++ test "$build_libtool_libs" = no; then ++ # If there is no dlname, no dlopen support or we're linking ++ # statically, we need to preload. We also need to preload any ++ # dependent libraries so libltdl's deplib preloader doesn't ++ # bomb out in the load deplibs phase. ++ dlprefiles="$dlprefiles $lib $dependency_libs" ++ else ++ newdlfiles="$newdlfiles $lib" ++ fi ++ continue ++ fi # $pass = dlopen + +-/* -DDEBUG is fairly common in CFLAGS. */ +-#undef DEBUG +-#if defined DEBUGWRAPPER +-# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__) +-#else +-# define DEBUG(format, ...) +-#endif ++ # We need an absolute path. ++ case $ladir in ++ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; ++ *) ++ abs_ladir=`cd "$ladir" && pwd` ++ if test -z "$abs_ladir"; then ++ func_warning "cannot determine absolute directory name of \`$ladir'" ++ func_warning "passing it literally to the linker, although it might fail" ++ abs_ladir="$ladir" ++ fi ++ ;; ++ esac ++ func_basename "$lib" ++ laname="$func_basename_result" + +-const char *program_name = NULL; ++ # Find the relevant object directory and library name. ++ if test "X$installed" = Xyes; then ++ if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then ++ func_warning "library \`$lib' was moved." ++ dir="$ladir" ++ absdir="$abs_ladir" ++ libdir="$abs_ladir" ++ else ++ dir="$libdir" ++ absdir="$libdir" ++ fi ++ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes ++ else ++ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then ++ dir="$ladir" ++ absdir="$abs_ladir" ++ # Remove this search path later ++ notinst_path="$notinst_path $abs_ladir" ++ else ++ dir="$ladir/$objdir" ++ absdir="$abs_ladir/$objdir" ++ # Remove this search path later ++ notinst_path="$notinst_path $abs_ladir" ++ fi ++ fi # $installed = yes ++ func_stripname 'lib' '.la' "$laname" ++ name=$func_stripname_result + +-void * xmalloc (size_t num); +-char * xstrdup (const char *string); +-const char * base_name (const char *name); +-char * find_executable(const char *wrapper); +-int check_executable(const char *path); +-char * strendzap(char *str, const char *pat); +-void lt_fatal (const char *message, ...); ++ # This library was specified with -dlpreopen. ++ if test "$pass" = dlpreopen; then ++ if test -z "$libdir" && test "$linkmode" = prog; then ++ func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" ++ fi ++ # Prefer using a static library (so that no silly _DYNAMIC symbols ++ # are required to link). ++ if test -n "$old_library"; then ++ newdlprefiles="$newdlprefiles $dir/$old_library" ++ # Keep a list of preopened convenience libraries to check ++ # that they are being used correctly in the link pass. ++ test -z "$libdir" && \ ++ dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library" ++ # Otherwise, use the dlname, so that lt_dlopen finds it. ++ elif test -n "$dlname"; then ++ newdlprefiles="$newdlprefiles $dir/$dlname" ++ else ++ newdlprefiles="$newdlprefiles $dir/$linklib" ++ fi ++ fi # $pass = dlpreopen + +-int +-main (int argc, char *argv[]) +-{ +- char **newargz; +- int i; ++ if test -z "$libdir"; then ++ # Link the convenience library ++ if test "$linkmode" = lib; then ++ deplibs="$dir/$old_library $deplibs" ++ elif test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$dir/$old_library $compile_deplibs" ++ finalize_deplibs="$dir/$old_library $finalize_deplibs" ++ else ++ deplibs="$lib $deplibs" # used for prog,scan pass ++ fi ++ continue ++ fi + +- program_name = (char *) xstrdup (base_name (argv[0])); +- DEBUG("(main) argv[0] : %s\n",argv[0]); +- DEBUG("(main) program_name : %s\n",program_name); +- newargz = XMALLOC(char *, argc+2); +-EOF + +- cat >> $cwrappersource <> $cwrappersource <<"EOF" +- newargz[1] = find_executable(argv[0]); +- if (newargz[1] == NULL) +- lt_fatal("Couldn't find %s", argv[0]); +- DEBUG("(main) found exe at : %s\n",newargz[1]); +- /* we know the script has the same name, without the .exe */ +- /* so make sure newargz[1] doesn't end in .exe */ +- strendzap(newargz[1],".exe"); +- for (i = 1; i < argc; i++) +- newargz[i+1] = xstrdup(argv[i]); +- newargz[argc+1] = NULL; ++ linkalldeplibs=no ++ if test "$link_all_deplibs" != no || test -z "$library_names" || ++ test "$build_libtool_libs" = no; then ++ linkalldeplibs=yes ++ fi + +- for (i=0; i> $cwrappersource <> $cwrappersource <> $cwrappersource <<"EOF" +- return 127; +-} ++ if test "$alldeplibs" = yes && ++ { test "$deplibs_check_method" = pass_all || ++ { test "$build_libtool_libs" = yes && ++ test -n "$library_names"; }; }; then ++ # We only need to search for static libraries ++ continue ++ fi ++ fi + +-void * +-xmalloc (size_t num) +-{ +- void * p = (void *) malloc (num); +- if (!p) +- lt_fatal ("Memory exhausted"); ++ link_static=no # Whether the deplib will be linked statically ++ use_static_libs=$prefer_static_libs ++ if test "$use_static_libs" = built && test "$installed" = yes; then ++ use_static_libs=no ++ fi ++ if test -n "$library_names" && ++ { test "$use_static_libs" = no || test -z "$old_library"; }; then ++ case $host in ++ *cygwin* | *mingw*) ++ # No point in relinking DLLs because paths are not encoded ++ notinst_deplibs="$notinst_deplibs $lib" ++ need_relink=no ++ ;; ++ *) ++ if test "$installed" = no; then ++ notinst_deplibs="$notinst_deplibs $lib" ++ need_relink=yes ++ fi ++ ;; ++ esac ++ # This is a shared library + +- return p; +-} ++ # Warn about portability, can't link against -module's on some ++ # systems (darwin). Don't bleat about dlopened modules though! ++ dlopenmodule="" ++ for dlpremoduletest in $dlprefiles; do ++ if test "X$dlpremoduletest" = "X$lib"; then ++ dlopenmodule="$dlpremoduletest" ++ break ++ fi ++ done ++ if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then ++ $ECHO ++ if test "$linkmode" = prog; then ++ $ECHO "*** Warning: Linking the executable $output against the loadable module" ++ else ++ $ECHO "*** Warning: Linking the shared library $output against the loadable module" ++ fi ++ $ECHO "*** $linklib is not portable!" ++ fi ++ if test "$linkmode" = lib && ++ test "$hardcode_into_libs" = yes; then ++ # Hardcode the library path. ++ # Skip directories that are in the system default run-time ++ # search path. ++ case " $sys_lib_dlsearch_path " in ++ *" $absdir "*) ;; ++ *) ++ case "$compile_rpath " in ++ *" $absdir "*) ;; ++ *) compile_rpath="$compile_rpath $absdir" ++ esac ++ ;; ++ esac ++ case " $sys_lib_dlsearch_path " in ++ *" $libdir "*) ;; ++ *) ++ case "$finalize_rpath " in ++ *" $libdir "*) ;; ++ *) finalize_rpath="$finalize_rpath $libdir" ++ esac ++ ;; ++ esac ++ fi + +-char * +-xstrdup (const char *string) +-{ +- return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL +-; +-} ++ if test -n "$old_archive_from_expsyms_cmds"; then ++ # figure out the soname ++ set dummy $library_names ++ shift ++ realname="$1" ++ shift ++ libname=`eval "\\$ECHO \"$libname_spec\""` ++ # use dlname if we got it. it's perfectly good, no? ++ if test -n "$dlname"; then ++ soname="$dlname" ++ elif test -n "$soname_spec"; then ++ # bleh windows ++ case $host in ++ *cygwin* | mingw*) ++ func_arith $current - $age ++ major=$func_arith_result ++ versuffix="-$major" ++ ;; ++ esac ++ eval soname=\"$soname_spec\" ++ else ++ soname="$realname" ++ fi + +-const char * +-base_name (const char *name) +-{ +- const char *base; ++ # Make a new name for the extract_expsyms_cmds to use ++ soroot="$soname" ++ func_basename "$soroot" ++ soname="$func_basename_result" ++ func_stripname 'lib' '.dll' "$soname" ++ newlib=libimp-$func_stripname_result.a + +-#if defined (HAVE_DOS_BASED_FILE_SYSTEM) +- /* Skip over the disk name in MSDOS pathnames. */ +- if (isalpha ((unsigned char)name[0]) && name[1] == ':') +- name += 2; +-#endif +- +- for (base = name; *name; name++) +- if (IS_DIR_SEPARATOR (*name)) +- base = name + 1; +- return base; +-} ++ # If the library has no export list, then create one now ++ if test -f "$output_objdir/$soname-def"; then : ++ else ++ func_verbose "extracting exported symbol list from \`$soname'" ++ func_execute_cmds "$extract_expsyms_cmds" 'exit $?' ++ fi + +-int +-check_executable(const char * path) +-{ +- struct stat st; ++ # Create $newlib ++ if test -f "$output_objdir/$newlib"; then :; else ++ func_verbose "generating import library for \`$soname'" ++ func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' ++ fi ++ # make sure the library variables are pointing to the new library ++ dir=$output_objdir ++ linklib=$newlib ++ fi # test -n "$old_archive_from_expsyms_cmds" + +- DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!"); +- if ((!path) || (!*path)) +- return 0; ++ if test "$linkmode" = prog || test "$mode" != relink; then ++ add_shlibpath= ++ add_dir= ++ add= ++ lib_linked=yes ++ case $hardcode_action in ++ immediate | unsupported) ++ if test "$hardcode_direct" = no; then ++ add="$dir/$linklib" ++ case $host in ++ *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; ++ *-*-sysv4*uw2*) add_dir="-L$dir" ;; ++ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ ++ *-*-unixware7*) add_dir="-L$dir" ;; ++ *-*-darwin* ) ++ # if the lib is a (non-dlopened) module then we can not ++ # link against it, someone is ignoring the earlier warnings ++ if /usr/bin/file -L $add 2> /dev/null | ++ $GREP ": [^:]* bundle" >/dev/null ; then ++ if test "X$dlopenmodule" != "X$lib"; then ++ $ECHO "*** Warning: lib $linklib is a module, not a shared library" ++ if test -z "$old_library" ; then ++ $ECHO ++ $ECHO "*** And there doesn't seem to be a static archive available" ++ $ECHO "*** The link will probably fail, sorry" ++ else ++ add="$dir/$old_library" ++ fi ++ elif test -n "$old_library"; then ++ add="$dir/$old_library" ++ fi ++ fi ++ esac ++ elif test "$hardcode_minus_L" = no; then ++ case $host in ++ *-*-sunos*) add_shlibpath="$dir" ;; ++ esac ++ add_dir="-L$dir" ++ add="-l$name" ++ elif test "$hardcode_shlibpath_var" = no; then ++ add_shlibpath="$dir" ++ add="-l$name" ++ else ++ lib_linked=no ++ fi ++ ;; ++ relink) ++ if test "$hardcode_direct" = yes && ++ test "$hardcode_direct_absolute" = no; then ++ add="$dir/$linklib" ++ elif test "$hardcode_minus_L" = yes; then ++ add_dir="-L$dir" ++ # Try looking first in the location we're being installed to. ++ if test -n "$inst_prefix_dir"; then ++ case $libdir in ++ [\\/]*) ++ add_dir="$add_dir -L$inst_prefix_dir$libdir" ++ ;; ++ esac ++ fi ++ add="-l$name" ++ elif test "$hardcode_shlibpath_var" = yes; then ++ add_shlibpath="$dir" ++ add="-l$name" ++ else ++ lib_linked=no ++ fi ++ ;; ++ *) lib_linked=no ;; ++ esac + +- if ((stat (path, &st) >= 0) && +- ( +- /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */ +-#if defined (S_IXOTH) +- ((st.st_mode & S_IXOTH) == S_IXOTH) || +-#endif +-#if defined (S_IXGRP) +- ((st.st_mode & S_IXGRP) == S_IXGRP) || +-#endif +- ((st.st_mode & S_IXUSR) == S_IXUSR)) +- ) +- return 1; +- else +- return 0; +-} ++ if test "$lib_linked" != yes; then ++ func_fatal_configuration "unsupported hardcode properties" ++ fi + +-/* Searches for the full path of the wrapper. Returns +- newly allocated full path name if found, NULL otherwise */ +-char * +-find_executable (const char* wrapper) +-{ +- int has_slash = 0; +- const char* p; +- const char* p_next; +- /* static buffer for getcwd */ +- char tmp[LT_PATHMAX + 1]; +- int tmp_len; +- char* concat_name; ++ if test -n "$add_shlibpath"; then ++ case :$compile_shlibpath: in ++ *":$add_shlibpath:"*) ;; ++ *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; ++ esac ++ fi ++ if test "$linkmode" = prog; then ++ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" ++ test -n "$add" && compile_deplibs="$add $compile_deplibs" ++ else ++ test -n "$add_dir" && deplibs="$add_dir $deplibs" ++ test -n "$add" && deplibs="$add $deplibs" ++ if test "$hardcode_direct" != yes && ++ test "$hardcode_minus_L" != yes && ++ test "$hardcode_shlibpath_var" = yes; then ++ case :$finalize_shlibpath: in ++ *":$libdir:"*) ;; ++ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; ++ esac ++ fi ++ fi ++ fi + +- DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"); ++ if test "$linkmode" = prog || test "$mode" = relink; then ++ add_shlibpath= ++ add_dir= ++ add= ++ # Finalize command for both is simple: just hardcode it. ++ if test "$hardcode_direct" = yes && ++ test "$hardcode_direct_absolute" = no; then ++ add="$libdir/$linklib" ++ elif test "$hardcode_minus_L" = yes; then ++ add_dir="-L$libdir" ++ add="-l$name" ++ elif test "$hardcode_shlibpath_var" = yes; then ++ case :$finalize_shlibpath: in ++ *":$libdir:"*) ;; ++ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; ++ esac ++ add="-l$name" ++ elif test "$hardcode_automatic" = yes; then ++ if test -n "$inst_prefix_dir" && ++ test -f "$inst_prefix_dir$libdir/$linklib" ; then ++ add="$inst_prefix_dir$libdir/$linklib" ++ else ++ add="$libdir/$linklib" ++ fi ++ else ++ # We cannot seem to hardcode it, guess we'll fake it. ++ add_dir="-L$libdir" ++ # Try looking first in the location we're being installed to. ++ if test -n "$inst_prefix_dir"; then ++ case $libdir in ++ [\\/]*) ++ add_dir="$add_dir -L$inst_prefix_dir$libdir" ++ ;; ++ esac ++ fi ++ add="-l$name" ++ fi + +- if ((wrapper == NULL) || (*wrapper == '\0')) +- return NULL; ++ if test "$linkmode" = prog; then ++ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" ++ test -n "$add" && finalize_deplibs="$add $finalize_deplibs" ++ else ++ test -n "$add_dir" && deplibs="$add_dir $deplibs" ++ test -n "$add" && deplibs="$add $deplibs" ++ fi ++ fi ++ elif test "$linkmode" = prog; then ++ # Here we assume that one of hardcode_direct or hardcode_minus_L ++ # is not unsupported. This is valid on all known static and ++ # shared platforms. ++ if test "$hardcode_direct" != unsupported; then ++ test -n "$old_library" && linklib="$old_library" ++ compile_deplibs="$dir/$linklib $compile_deplibs" ++ finalize_deplibs="$dir/$linklib $finalize_deplibs" ++ else ++ compile_deplibs="-l$name -L$dir $compile_deplibs" ++ finalize_deplibs="-l$name -L$dir $finalize_deplibs" ++ fi ++ elif test "$build_libtool_libs" = yes; then ++ # Not a shared library ++ if test "$deplibs_check_method" != pass_all; then ++ # We're trying link a shared library against a static one ++ # but the system doesn't support it. + +- /* Absolute path? */ +-#if defined (HAVE_DOS_BASED_FILE_SYSTEM) +- if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':') +- { +- concat_name = xstrdup (wrapper); +- if (check_executable(concat_name)) +- return concat_name; +- XFREE(concat_name); +- } +- else +- { +-#endif +- if (IS_DIR_SEPARATOR (wrapper[0])) +- { +- concat_name = xstrdup (wrapper); +- if (check_executable(concat_name)) +- return concat_name; +- XFREE(concat_name); +- } +-#if defined (HAVE_DOS_BASED_FILE_SYSTEM) +- } +-#endif ++ # Just print a warning and add the library to dependency_libs so ++ # that the program can be linked against the static library. ++ $ECHO ++ $ECHO "*** Warning: This system can not link to static lib archive $lib." ++ $ECHO "*** I have the capability to make that library automatically link in when" ++ $ECHO "*** you link to this library. But I can only do this if you have a" ++ $ECHO "*** shared version of the library, which you do not appear to have." ++ if test "$module" = yes; then ++ $ECHO "*** But as you try to build a module library, libtool will still create " ++ $ECHO "*** a static module, that should work as long as the dlopening application" ++ $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime." ++ if test -z "$global_symbol_pipe"; then ++ $ECHO ++ $ECHO "*** However, this would only work if libtool was able to extract symbol" ++ $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" ++ $ECHO "*** not find such a program. So, this module is probably useless." ++ $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." ++ fi ++ if test "$build_old_libs" = no; then ++ build_libtool_libs=module ++ build_old_libs=yes ++ else ++ build_libtool_libs=no ++ fi ++ fi ++ else ++ deplibs="$dir/$old_library $deplibs" ++ link_static=yes ++ fi ++ fi # link shared/static library? + +- for (p = wrapper; *p; p++) +- if (*p == '/') +- { +- has_slash = 1; +- break; +- } +- if (!has_slash) +- { +- /* no slashes; search PATH */ +- const char* path = getenv ("PATH"); +- if (path != NULL) +- { +- for (p = path; *p; p = p_next) +- { +- const char* q; +- size_t p_len; +- for (q = p; *q; q++) +- if (IS_PATH_SEPARATOR(*q)) +- break; +- p_len = q - p; +- p_next = (*q == '\0' ? q : q + 1); +- if (p_len == 0) +- { +- /* empty path: current directory */ +- if (getcwd (tmp, LT_PATHMAX) == NULL) +- lt_fatal ("getcwd failed"); +- tmp_len = strlen(tmp); +- concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); +- memcpy (concat_name, tmp, tmp_len); +- concat_name[tmp_len] = '/'; +- strcpy (concat_name + tmp_len + 1, wrapper); +- } +- else +- { +- concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1); +- memcpy (concat_name, p, p_len); +- concat_name[p_len] = '/'; +- strcpy (concat_name + p_len + 1, wrapper); +- } +- if (check_executable(concat_name)) +- return concat_name; +- XFREE(concat_name); +- } +- } +- /* not found in PATH; assume curdir */ +- } +- /* Relative path | not found in path: prepend cwd */ +- if (getcwd (tmp, LT_PATHMAX) == NULL) +- lt_fatal ("getcwd failed"); +- tmp_len = strlen(tmp); +- concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); +- memcpy (concat_name, tmp, tmp_len); +- concat_name[tmp_len] = '/'; +- strcpy (concat_name + tmp_len + 1, wrapper); ++ if test "$linkmode" = lib; then ++ if test -n "$dependency_libs" && ++ { test "$hardcode_into_libs" != yes || ++ test "$build_old_libs" = yes || ++ test "$link_static" = yes; }; then ++ # Extract -R from dependency_libs ++ temp_deplibs= ++ for libdir in $dependency_libs; do ++ case $libdir in ++ -R*) func_stripname '-R' '' "$libdir" ++ temp_xrpath=$func_stripname_result ++ case " $xrpath " in ++ *" $temp_xrpath "*) ;; ++ *) xrpath="$xrpath $temp_xrpath";; ++ esac;; ++ *) temp_deplibs="$temp_deplibs $libdir";; ++ esac ++ done ++ dependency_libs="$temp_deplibs" ++ fi + +- if (check_executable(concat_name)) +- return concat_name; +- XFREE(concat_name); +- return NULL; +-} ++ newlib_search_path="$newlib_search_path $absdir" ++ # Link against this library ++ test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" ++ # ... and its dependency_libs ++ tmp_libs= ++ for deplib in $dependency_libs; do ++ newdependency_libs="$deplib $newdependency_libs" ++ if $opt_duplicate_deps ; then ++ case "$tmp_libs " in ++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; ++ esac ++ fi ++ tmp_libs="$tmp_libs $deplib" ++ done + +-char * +-strendzap(char *str, const char *pat) +-{ +- size_t len, patlen; ++ if test "$link_all_deplibs" != no; then ++ # Add the search paths of all dependency libraries ++ for deplib in $dependency_libs; do ++ case $deplib in ++ -L*) path="$deplib" ;; ++ *.la) ++ func_dirname "$deplib" "" "." ++ dir="$func_dirname_result" ++ # We need an absolute path. ++ case $dir in ++ [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; ++ *) ++ absdir=`cd "$dir" && pwd` ++ if test -z "$absdir"; then ++ func_warning "cannot determine absolute directory name of \`$dir'" ++ absdir="$dir" ++ fi ++ ;; ++ esac ++ if $GREP "^installed=no" $deplib > /dev/null; then ++ case $host in ++ *-*-darwin*) ++ depdepl= ++ eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` ++ if test -n "$deplibrary_names" ; then ++ for tmp in $deplibrary_names ; do ++ depdepl=$tmp ++ done ++ if test -f "$absdir/$objdir/$depdepl" ; then ++ depdepl="$absdir/$objdir/$depdepl" ++ darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` ++ if test -z "$darwin_install_name"; then ++ darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` ++ fi ++ compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" ++ linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}" ++ path= ++ fi ++ fi ++ ;; ++ *) ++ path="-L$absdir/$objdir" ++ ;; ++ esac ++ else ++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` ++ test -z "$libdir" && \ ++ func_fatal_error "\`$deplib' is not a valid libtool archive" ++ test "$absdir" != "$libdir" && \ ++ func_warning "\`$deplib' seems to be moved" + +- assert(str != NULL); +- assert(pat != NULL); ++ path="-L$absdir" ++ fi ++ ;; ++ esac ++ case " $deplibs " in ++ *" $path "*) ;; ++ *) deplibs="$path $deplibs" ;; ++ esac ++ done ++ fi # link_all_deplibs != no ++ fi # linkmode = lib ++ done # for deplib in $libs ++ if test "$pass" = link; then ++ if test "$linkmode" = "prog"; then ++ compile_deplibs="$new_inherited_linker_flags $compile_deplibs" ++ finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" ++ else ++ compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ++ fi ++ fi ++ dependency_libs="$newdependency_libs" ++ if test "$pass" = dlpreopen; then ++ # Link the dlpreopened libraries before other libraries ++ for deplib in $save_deplibs; do ++ deplibs="$deplib $deplibs" ++ done ++ fi ++ if test "$pass" != dlopen; then ++ if test "$pass" != conv; then ++ # Make sure lib_search_path contains only unique directories. ++ lib_search_path= ++ for dir in $newlib_search_path; do ++ case "$lib_search_path " in ++ *" $dir "*) ;; ++ *) lib_search_path="$lib_search_path $dir" ;; ++ esac ++ done ++ newlib_search_path= ++ fi + +- len = strlen(str); +- patlen = strlen(pat); ++ if test "$linkmode,$pass" != "prog,link"; then ++ vars="deplibs" ++ else ++ vars="compile_deplibs finalize_deplibs" ++ fi ++ for var in $vars dependency_libs; do ++ # Add libraries to $var in reverse order ++ eval tmp_libs=\"\$$var\" ++ new_libs= ++ for deplib in $tmp_libs; do ++ # FIXME: Pedantically, this is the right thing to do, so ++ # that some nasty dependency loop isn't accidentally ++ # broken: ++ #new_libs="$deplib $new_libs" ++ # Pragmatically, this seems to cause very few problems in ++ # practice: ++ case $deplib in ++ -L*) new_libs="$deplib $new_libs" ;; ++ -R*) ;; ++ *) ++ # And here is the reason: when a library appears more ++ # than once as an explicit dependence of a library, or ++ # is implicitly linked in more than once by the ++ # compiler, it is considered special, and multiple ++ # occurrences thereof are not removed. Compare this ++ # with having the same library being listed as a ++ # dependency of multiple other libraries: in this case, ++ # we know (pedantically, we assume) the library does not ++ # need to be listed more than once, so we keep only the ++ # last copy. This is not always right, but it is rare ++ # enough that we require users that really mean to play ++ # such unportable linking tricks to link the library ++ # using -Wl,-lname, so that libtool does not consider it ++ # for duplicate removal. ++ case " $specialdeplibs " in ++ *" $deplib "*) new_libs="$deplib $new_libs" ;; ++ *) ++ case " $new_libs " in ++ *" $deplib "*) ;; ++ *) new_libs="$deplib $new_libs" ;; ++ esac ++ ;; ++ esac ++ ;; ++ esac ++ done ++ tmp_libs= ++ for deplib in $new_libs; do ++ case $deplib in ++ -L*) ++ case " $tmp_libs " in ++ *" $deplib "*) ;; ++ *) tmp_libs="$tmp_libs $deplib" ;; ++ esac ++ ;; ++ *) tmp_libs="$tmp_libs $deplib" ;; ++ esac ++ done ++ eval $var=\"$tmp_libs\" ++ done # for var ++ fi ++ # Last step: remove runtime libs from dependency_libs ++ # (they stay in deplibs) ++ tmp_libs= ++ for i in $dependency_libs ; do ++ case " $predeps $postdeps $compiler_lib_search_path " in ++ *" $i "*) ++ i="" ++ ;; ++ esac ++ if test -n "$i" ; then ++ tmp_libs="$tmp_libs $i" ++ fi ++ done ++ dependency_libs=$tmp_libs ++ done # for pass ++ if test "$linkmode" = prog; then ++ dlfiles="$newdlfiles" ++ fi ++ if test "$linkmode" = prog || test "$linkmode" = lib; then ++ dlprefiles="$newdlprefiles" ++ fi + +- if (patlen <= len) +- { +- str += len - patlen; +- if (strcmp(str, pat) == 0) +- *str = '\0'; +- } +- return str; +-} ++ case $linkmode in ++ oldlib) ++ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then ++ func_warning "\`-dlopen' is ignored for archives" ++ fi + +-static void +-lt_error_core (int exit_status, const char * mode, +- const char * message, va_list ap) +-{ +- fprintf (stderr, "%s: %s: ", program_name, mode); +- vfprintf (stderr, message, ap); +- fprintf (stderr, ".\n"); ++ case " $deplibs" in ++ *\ -l* | *\ -L*) ++ func_warning "\`-l' and \`-L' are ignored for archives" ;; ++ esac + +- if (exit_status >= 0) +- exit (exit_status); +-} ++ test -n "$rpath" && \ ++ func_warning "\`-rpath' is ignored for archives" + +-void +-lt_fatal (const char *message, ...) +-{ +- va_list ap; +- va_start (ap, message); +- lt_error_core (EXIT_FAILURE, "FATAL", message, ap); +- va_end (ap); +-} +-EOF +- # we should really use a build-platform specific compiler +- # here, but OTOH, the wrappers (shell script and this C one) +- # are only useful if you want to execute the "real" binary. +- # Since the "real" binary is built for $host, then this +- # wrapper might as well be built for $host, too. +- $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource +- ;; +- esac +- $rm $output +- trap "$rm $output; exit $EXIT_FAILURE" 1 2 15 ++ test -n "$xrpath" && \ ++ func_warning "\`-R' is ignored for archives" + +- $echo > $output "\ +-#! $SHELL ++ test -n "$vinfo" && \ ++ func_warning "\`-version-info/-version-number' is ignored for archives" + +-# $output - temporary wrapper script for $objdir/$outputname +-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +-# +-# The $output program cannot be directly executed until all the libtool +-# libraries that it depends on are installed. +-# +-# This wrapper script should never be moved out of the build directory. +-# If it is, it will not operate correctly. ++ test -n "$release" && \ ++ func_warning "\`-release' is ignored for archives" + +-# Sed substitution that helps us do robust quoting. It backslashifies +-# metacharacters that are still active within double-quoted strings. +-Xsed='${SED} -e 1s/^X//' +-sed_quote_subst='$sed_quote_subst' ++ test -n "$export_symbols$export_symbols_regex" && \ ++ func_warning "\`-export-symbols' is ignored for archives" + +-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE). +-if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then +- emulate sh +- NULLCMD=: +- # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which +- # is contrary to our usage. Disable this feature. +- alias -g '\${1+\"\$@\"}'='\"\$@\"' +- setopt NO_GLOB_SUBST +-else +- case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac +-fi +-BIN_SH=xpg4; export BIN_SH # for Tru64 +-DUALCASE=1; export DUALCASE # for MKS sh ++ # Now set the variables for building old libraries. ++ build_libtool_libs=no ++ oldlibs="$output" ++ objs="$objs$old_deplibs" ++ ;; + +-# The HP-UX ksh and POSIX shell print the target directory to stdout +-# if CDPATH is set. +-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++ lib) ++ # Make sure we only generate libraries of the form `libNAME.la'. ++ case $outputname in ++ lib*) ++ func_stripname 'lib' '.la' "$outputname" ++ name=$func_stripname_result ++ eval shared_ext=\"$shrext_cmds\" ++ eval libname=\"$libname_spec\" ++ ;; ++ *) ++ test "$module" = no && \ ++ func_fatal_help "libtool library \`$output' must begin with \`lib'" + +-relink_command=\"$relink_command\" ++ if test "$need_lib_prefix" != no; then ++ # Add the "lib" prefix for modules if required ++ func_stripname '' '.la' "$outputname" ++ name=$func_stripname_result ++ eval shared_ext=\"$shrext_cmds\" ++ eval libname=\"$libname_spec\" ++ else ++ func_stripname '' '.la' "$outputname" ++ libname=$func_stripname_result ++ fi ++ ;; ++ esac + +-# This environment variable determines our operation mode. +-if test \"\$libtool_install_magic\" = \"$magic\"; then +- # install mode needs the following variable: +- notinst_deplibs='$notinst_deplibs' +-else +- # When we are sourced in execute mode, \$file and \$echo are already set. +- if test \"\$libtool_execute_magic\" != \"$magic\"; then +- echo=\"$qecho\" +- file=\"\$0\" +- # Make sure echo works. +- if test \"X\$1\" = X--no-reexec; then +- # Discard the --no-reexec flag, and continue. +- shift +- elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then +- # Yippee, \$echo works! +- : +- else +- # Restart under the correct shell, and then maybe \$echo will work. +- exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} +- fi +- fi\ +-" +- $echo >> $output "\ ++ if test -n "$objs"; then ++ if test "$deplibs_check_method" != pass_all; then ++ func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" ++ else ++ $ECHO ++ $ECHO "*** Warning: Linking the shared library $output against the non-libtool" ++ $ECHO "*** objects $objs is not portable!" ++ libobjs="$libobjs $objs" ++ fi ++ fi + +- # Find the directory that this script lives in. +- thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` +- test \"x\$thisdir\" = \"x\$file\" && thisdir=. ++ test "$dlself" != no && \ ++ func_warning "\`-dlopen self' is ignored for libtool libraries" + +- # Follow symbolic links until we get to the real thisdir. +- file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` +- while test -n \"\$file\"; do +- destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` ++ set dummy $rpath ++ shift ++ test "$#" -gt 1 && \ ++ func_warning "ignoring multiple \`-rpath's for a libtool library" + +- # If there was a directory component, then change thisdir. +- if test \"x\$destdir\" != \"x\$file\"; then +- case \"\$destdir\" in +- [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; +- *) thisdir=\"\$thisdir/\$destdir\" ;; +- esac +- fi ++ install_libdir="$1" + +- file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` +- file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` +- done ++ oldlibs= ++ if test -z "$rpath"; then ++ if test "$build_libtool_libs" = yes; then ++ # Building a libtool convenience library. ++ # Some compilers have problems with a `.al' extension so ++ # convenience libraries should have the same extension an ++ # archive normally would. ++ oldlibs="$output_objdir/$libname.$libext $oldlibs" ++ build_libtool_libs=convenience ++ build_old_libs=yes ++ fi + +- # Try to get the absolute directory name. +- absdir=\`cd \"\$thisdir\" && pwd\` +- test -n \"\$absdir\" && thisdir=\"\$absdir\" +-" ++ test -n "$vinfo" && \ ++ func_warning "\`-version-info/-version-number' is ignored for convenience libraries" + +- if test "$fast_install" = yes; then +- $echo >> $output "\ +- program=lt-'$outputname'$exeext +- progdir=\"\$thisdir/$objdir\" ++ test -n "$release" && \ ++ func_warning "\`-release' is ignored for convenience libraries" ++ else + +- if test ! -f \"\$progdir/\$program\" || \\ +- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ +- test \"X\$file\" != \"X\$progdir/\$program\"; }; then ++ # Parse the version information argument. ++ save_ifs="$IFS"; IFS=':' ++ set dummy $vinfo 0 0 0 ++ shift ++ IFS="$save_ifs" + +- file=\"\$\$-\$program\" ++ test -n "$7" && \ ++ func_fatal_help "too many parameters to \`-version-info'" + +- if test ! -d \"\$progdir\"; then +- $mkdir \"\$progdir\" +- else +- $rm \"\$progdir/\$file\" +- fi" ++ # convert absolute version numbers to libtool ages ++ # this retains compatibility with .la files and attempts ++ # to make the code below a bit more comprehensible ++ ++ case $vinfo_number in ++ yes) ++ number_major="$1" ++ number_minor="$2" ++ number_revision="$3" ++ # ++ # There are really only two kinds -- those that ++ # use the current revision as the major version ++ # and those that subtract age and use age as ++ # a minor version. But, then there is irix ++ # which has an extra 1 added just for fun ++ # ++ case $version_type in ++ darwin|linux|osf|windows|none) ++ func_arith $number_major + $number_minor ++ current=$func_arith_result ++ age="$number_minor" ++ revision="$number_revision" ++ ;; ++ freebsd-aout|freebsd-elf|sunos) ++ current="$number_major" ++ revision="$number_minor" ++ age="0" ++ ;; ++ irix|nonstopux) ++ func_arith $number_major + $number_minor ++ current=$func_arith_result ++ age="$number_minor" ++ revision="$number_minor" ++ lt_irix_increment=no ++ ;; ++ *) ++ func_fatal_configuration "$modename: unknown library version type \`$version_type'" ++ ;; ++ esac ++ ;; ++ no) ++ current="$1" ++ revision="$2" ++ age="$3" ++ ;; ++ esac + +- $echo >> $output "\ ++ # Check that each of the things are valid numbers. ++ case $current in ++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; ++ *) ++ func_error "CURRENT \`$current' must be a nonnegative integer" ++ func_fatal_error "\`$vinfo' is not valid version information" ++ ;; ++ esac + +- # relink executable if necessary +- if test -n \"\$relink_command\"; then +- if relink_command_output=\`eval \$relink_command 2>&1\`; then : +- else +- $echo \"\$relink_command_output\" >&2 +- $rm \"\$progdir/\$file\" +- exit $EXIT_FAILURE +- fi +- fi ++ case $revision in ++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; ++ *) ++ func_error "REVISION \`$revision' must be a nonnegative integer" ++ func_fatal_error "\`$vinfo' is not valid version information" ++ ;; ++ esac + +- $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || +- { $rm \"\$progdir/\$program\"; +- $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } +- $rm \"\$progdir/\$file\" +- fi" +- else +- $echo >> $output "\ +- program='$outputname' +- progdir=\"\$thisdir/$objdir\" +-" ++ case $age in ++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; ++ *) ++ func_error "AGE \`$age' must be a nonnegative integer" ++ func_fatal_error "\`$vinfo' is not valid version information" ++ ;; ++ esac ++ ++ if test "$age" -gt "$current"; then ++ func_error "AGE \`$age' is greater than the current interface number \`$current'" ++ func_fatal_error "\`$vinfo' is not valid version information" + fi + +- $echo >> $output "\ ++ # Calculate the version variables. ++ major= ++ versuffix= ++ verstring= ++ case $version_type in ++ none) ;; + +- if test -f \"\$progdir/\$program\"; then" ++ darwin) ++ # Like Linux, but with the current version available in ++ # verstring for coding it into the library header ++ func_arith $current - $age ++ major=.$func_arith_result ++ versuffix="$major.$age.$revision" ++ # Darwin ld doesn't like 0 for these options... ++ func_arith $current + 1 ++ minor_current=$func_arith_result ++ xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" ++ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" ++ ;; + +- # Export our shlibpath_var if we have one. +- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then +- $echo >> $output "\ +- # Add our own library path to $shlibpath_var +- $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" ++ freebsd-aout) ++ major=".$current" ++ versuffix=".$current.$revision"; ++ ;; + +- # Some systems cannot cope with colon-terminated $shlibpath_var +- # The second colon is a workaround for a bug in BeOS R4 sed +- $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` ++ freebsd-elf) ++ major=".$current" ++ versuffix=".$current" ++ ;; + +- export $shlibpath_var +-" ++ irix | nonstopux) ++ if test "X$lt_irix_increment" = "Xno"; then ++ func_arith $current - $age ++ else ++ func_arith $current - $age + 1 ++ fi ++ major=$func_arith_result ++ ++ case $version_type in ++ nonstopux) verstring_prefix=nonstopux ;; ++ *) verstring_prefix=sgi ;; ++ esac ++ verstring="$verstring_prefix$major.$revision" ++ ++ # Add in all the interfaces that we are compatible with. ++ loop=$revision ++ while test "$loop" -ne 0; do ++ func_arith $revision - $loop ++ iface=$func_arith_result ++ func_arith $loop - 1 ++ loop=$func_arith_result ++ verstring="$verstring_prefix$major.$iface:$verstring" ++ done ++ ++ # Before this point, $major must not contain `.'. ++ major=.$major ++ versuffix="$major.$revision" ++ ;; ++ ++ linux) ++ func_arith $current - $age ++ major=.$func_arith_result ++ versuffix="$major.$age.$revision" ++ ;; ++ ++ osf) ++ func_arith $current - $age ++ major=.$func_arith_result ++ versuffix=".$current.$age.$revision" ++ verstring="$current.$age.$revision" ++ ++ # Add in all the interfaces that we are compatible with. ++ loop=$age ++ while test "$loop" -ne 0; do ++ func_arith $current - $loop ++ iface=$func_arith_result ++ func_arith $loop - 1 ++ loop=$func_arith_result ++ verstring="$verstring:${iface}.0" ++ done ++ ++ # Make executables depend on our current version. ++ verstring="$verstring:${current}.0" ++ ;; ++ ++ qnx) ++ major=".$current" ++ versuffix=".$current" ++ ;; ++ ++ sunos) ++ major=".$current" ++ versuffix=".$current.$revision" ++ ;; ++ ++ windows) ++ # Use '-' rather than '.', since we only want one ++ # extension on DOS 8.3 filesystems. ++ func_arith $current - $age ++ major=$func_arith_result ++ versuffix="-$major" ++ ;; ++ ++ *) ++ func_fatal_configuration "unknown library version type \`$version_type'" ++ ;; ++ esac ++ ++ # Clear the version info if we defaulted, and they specified a release. ++ if test -z "$vinfo" && test -n "$release"; then ++ major= ++ case $version_type in ++ darwin) ++ # we can't check for "0.0" in archive_cmds due to quoting ++ # problems, so we reset it completely ++ verstring= ++ ;; ++ *) ++ verstring="0.0" ++ ;; ++ esac ++ if test "$need_version" = no; then ++ versuffix= ++ else ++ versuffix=".0.0" ++ fi + fi + +- # fixup the dll searchpath if we need to. +- if test -n "$dllsearchpath"; then +- $echo >> $output "\ +- # Add the dll search path components to the executable PATH +- PATH=$dllsearchpath:\$PATH +-" ++ # Remove version info from name if versioning should be avoided ++ if test "$avoid_version" = yes && test "$need_version" = no; then ++ major= ++ versuffix= ++ verstring="" + fi + +- $echo >> $output "\ +- if test \"\$libtool_execute_magic\" != \"$magic\"; then +- # Run the actual program with our arguments. +-" +- case $host in +- # Backslashes separate directories on plain windows +- *-*-mingw | *-*-os2*) +- $echo >> $output "\ +- exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} +-" ++ # Check to see if the archive will have undefined symbols. ++ if test "$allow_undefined" = yes; then ++ if test "$allow_undefined_flag" = unsupported; then ++ func_warning "undefined symbols not allowed in $host shared libraries" ++ build_libtool_libs=no ++ build_old_libs=yes ++ fi ++ else ++ # Don't allow undefined symbols. ++ allow_undefined_flag="$no_undefined_flag" ++ fi ++ ++ fi ++ ++ func_generate_dlsyms "$libname" "$libname" "yes" ++ libobjs="$libobjs $symfileobj" ++ test "X$libobjs" = "X " && libobjs= ++ ++ if test "$mode" != relink; then ++ # Remove our outputs, but don't remove object files since they ++ # may have been created when compiling PIC objects. ++ removelist= ++ tempremovelist=`$ECHO "$output_objdir/*"` ++ for p in $tempremovelist; do ++ case $p in ++ *.$objext) ++ ;; ++ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) ++ if test "X$precious_files_regex" != "X"; then ++ if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 ++ then ++ continue ++ fi ++ fi ++ removelist="$removelist $p" ++ ;; ++ *) ;; ++ esac ++ done ++ test -n "$removelist" && \ ++ func_show_eval "${RM}r \$removelist" ++ fi ++ ++ # Now set the variables for building old libraries. ++ if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then ++ oldlibs="$oldlibs $output_objdir/$libname.$libext" ++ ++ # Transform .lo files to .o files. ++ oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` ++ fi ++ ++ # Eliminate all temporary directories. ++ #for path in $notinst_path; do ++ # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"` ++ # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"` ++ # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"` ++ #done ++ ++ if test -n "$xrpath"; then ++ # If the user specified any rpath flags, then add them. ++ temp_xrpath= ++ for libdir in $xrpath; do ++ temp_xrpath="$temp_xrpath -R$libdir" ++ case "$finalize_rpath " in ++ *" $libdir "*) ;; ++ *) finalize_rpath="$finalize_rpath $libdir" ;; ++ esac ++ done ++ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then ++ dependency_libs="$temp_xrpath $dependency_libs" ++ fi ++ fi ++ ++ # Make sure dlfiles contains only unique files that won't be dlpreopened ++ old_dlfiles="$dlfiles" ++ dlfiles= ++ for lib in $old_dlfiles; do ++ case " $dlprefiles $dlfiles " in ++ *" $lib "*) ;; ++ *) dlfiles="$dlfiles $lib" ;; ++ esac ++ done ++ ++ # Make sure dlprefiles contains only unique files ++ old_dlprefiles="$dlprefiles" ++ dlprefiles= ++ for lib in $old_dlprefiles; do ++ case "$dlprefiles " in ++ *" $lib "*) ;; ++ *) dlprefiles="$dlprefiles $lib" ;; ++ esac ++ done ++ ++ if test "$build_libtool_libs" = yes; then ++ if test -n "$rpath"; then ++ case $host in ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) ++ # these systems don't actually have a c library (as such)! ++ ;; ++ *-*-rhapsody* | *-*-darwin1.[012]) ++ # Rhapsody C library is in the System framework ++ deplibs="$deplibs System.ltframework" ++ ;; ++ *-*-netbsd*) ++ # Don't link with libc until the a.out ld.so is fixed. ++ ;; ++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) ++ # Do not include libc due to us having libc/libc_r. ++ ;; ++ *-*-sco3.2v5* | *-*-sco5v6*) ++ # Causes problems with __ctype ++ ;; ++ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) ++ # Compiler inserts libc in the correct place for threads to work ++ ;; ++ *) ++ # Add libc to deplibs on all other systems if necessary. ++ if test "$build_libtool_need_lc" = "yes"; then ++ deplibs="$deplibs -lc" ++ fi ++ ;; ++ esac ++ fi ++ ++ # Transform deplibs into only deplibs that can be linked in shared. ++ name_save=$name ++ libname_save=$libname ++ release_save=$release ++ versuffix_save=$versuffix ++ major_save=$major ++ # I'm not sure if I'm treating the release correctly. I think ++ # release should show up in the -l (ie -lgmp5) so we don't want to ++ # add it in twice. Is that correct? ++ release="" ++ versuffix="" ++ major="" ++ newdeplibs= ++ droppeddeps=no ++ case $deplibs_check_method in ++ pass_all) ++ # Don't check for shared/static. Everything works. ++ # This might be a little naive. We might want to check ++ # whether the library exists or not. But this is on ++ # osf3 & osf4 and I'm not really sure... Just ++ # implementing what was already the behavior. ++ newdeplibs=$deplibs ++ ;; ++ test_compile) ++ # This code stresses the "libraries are programs" paradigm to its ++ # limits. Maybe even breaks it. We compile a program, linking it ++ # against the deplibs as a proxy for the library. Then we can check ++ # whether they linked in statically or dynamically with ldd. ++ $opt_dry_run || $RM conftest.c ++ cat > conftest.c </dev/null` ++ for potent_lib in $potential_libs; do ++ # Follow soft links. ++ if ls -lLd "$potent_lib" 2>/dev/null | ++ $GREP " -> " >/dev/null; then ++ continue ++ fi ++ # The statement above tries to avoid entering an ++ # endless loop below, in case of cyclic links. ++ # We might still enter an endless loop, since a link ++ # loop can be closed while we follow links, ++ # but so what? ++ potlib="$potent_lib" ++ while test -h "$potlib" 2>/dev/null; do ++ potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` ++ case $potliblink in ++ [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; ++ *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; ++ esac ++ done ++ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | ++ $SED -e 10q | ++ $EGREP "$file_magic_regex" > /dev/null; then ++ newdeplibs="$newdeplibs $a_deplib" ++ a_deplib="" ++ break 2 ++ fi ++ done ++ done ++ fi ++ if test -n "$a_deplib" ; then ++ droppeddeps=yes ++ $ECHO ++ $ECHO "*** Warning: linker path does not have real file for library $a_deplib." ++ $ECHO "*** I have the capability to make that library automatically link in when" ++ $ECHO "*** you link to this library. But I can only do this if you have a" ++ $ECHO "*** shared version of the library, which you do not appear to have" ++ $ECHO "*** because I did check the linker path looking for a file starting" ++ if test -z "$potlib" ; then ++ $ECHO "*** with $libname but no candidates were found. (...for file magic test)" ++ else ++ $ECHO "*** with $libname and none of the candidates passed a file format test" ++ $ECHO "*** using a file magic. Last file checked: $potlib" ++ fi ++ fi ++ ;; ++ *) ++ # Add a -L argument. ++ newdeplibs="$newdeplibs $a_deplib" ++ ;; ++ esac ++ done # Gone through all deplibs. ++ ;; ++ match_pattern*) ++ set dummy $deplibs_check_method; shift ++ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` ++ for a_deplib in $deplibs; do ++ case $a_deplib in ++ -l*) ++ func_stripname -l '' "$a_deplib" ++ name=$func_stripname_result ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ case " $predeps $postdeps " in ++ *" $a_deplib "*) ++ newdeplibs="$newdeplibs $a_deplib" ++ a_deplib="" ++ ;; ++ esac ++ fi ++ if test -n "$a_deplib" ; then ++ libname=`eval "\\$ECHO \"$libname_spec\""` ++ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do ++ potential_libs=`ls $i/$libname[.-]* 2>/dev/null` ++ for potent_lib in $potential_libs; do ++ potlib="$potent_lib" # see symlink-check above in file_magic test ++ if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \ ++ $EGREP "$match_pattern_regex" > /dev/null; then ++ newdeplibs="$newdeplibs $a_deplib" ++ a_deplib="" ++ break 2 ++ fi ++ done ++ done ++ fi ++ if test -n "$a_deplib" ; then ++ droppeddeps=yes ++ $ECHO ++ $ECHO "*** Warning: linker path does not have real file for library $a_deplib." ++ $ECHO "*** I have the capability to make that library automatically link in when" ++ $ECHO "*** you link to this library. But I can only do this if you have a" ++ $ECHO "*** shared version of the library, which you do not appear to have" ++ $ECHO "*** because I did check the linker path looking for a file starting" ++ if test -z "$potlib" ; then ++ $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" ++ else ++ $ECHO "*** with $libname and none of the candidates passed a file format test" ++ $ECHO "*** using a regex pattern. Last file checked: $potlib" ++ fi ++ fi ++ ;; ++ *) ++ # Add a -L argument. ++ newdeplibs="$newdeplibs $a_deplib" ++ ;; ++ esac ++ done # Gone through all deplibs. ++ ;; ++ none | unknown | *) ++ newdeplibs="" ++ tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \ ++ -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'` ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ for i in $predeps $postdeps ; do ++ # can't use Xsed below, because $i might contain '/' ++ tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"` ++ done ++ fi ++ if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' | ++ $GREP . >/dev/null; then ++ $ECHO ++ if test "X$deplibs_check_method" = "Xnone"; then ++ $ECHO "*** Warning: inter-library dependencies are not supported in this platform." ++ else ++ $ECHO "*** Warning: inter-library dependencies are not known to be supported." ++ fi ++ $ECHO "*** All declared inter-library dependencies are being dropped." ++ droppeddeps=yes ++ fi ++ ;; ++ esac ++ versuffix=$versuffix_save ++ major=$major_save ++ release=$release_save ++ libname=$libname_save ++ name=$name_save ++ ++ case $host in ++ *-*-rhapsody* | *-*-darwin1.[012]) ++ # On Rhapsody replace the C library with the System framework ++ newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'` ++ ;; ++ esac ++ ++ if test "$droppeddeps" = yes; then ++ if test "$module" = yes; then ++ $ECHO ++ $ECHO "*** Warning: libtool could not satisfy all declared inter-library" ++ $ECHO "*** dependencies of module $libname. Therefore, libtool will create" ++ $ECHO "*** a static module, that should work as long as the dlopening" ++ $ECHO "*** application is linked with the -dlopen flag." ++ if test -z "$global_symbol_pipe"; then ++ $ECHO ++ $ECHO "*** However, this would only work if libtool was able to extract symbol" ++ $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" ++ $ECHO "*** not find such a program. So, this module is probably useless." ++ $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." ++ fi ++ if test "$build_old_libs" = no; then ++ oldlibs="$output_objdir/$libname.$libext" ++ build_libtool_libs=module ++ build_old_libs=yes ++ else ++ build_libtool_libs=no ++ fi ++ else ++ $ECHO "*** The inter-library dependencies that have been dropped here will be" ++ $ECHO "*** automatically added whenever a program is linked with this library" ++ $ECHO "*** or is declared to -dlopen it." ++ ++ if test "$allow_undefined" = no; then ++ $ECHO ++ $ECHO "*** Since this library must not contain undefined symbols," ++ $ECHO "*** because either the platform does not support them or" ++ $ECHO "*** it was explicitly requested with -no-undefined," ++ $ECHO "*** libtool will only create a static version of it." ++ if test "$build_old_libs" = no; then ++ oldlibs="$output_objdir/$libname.$libext" ++ build_libtool_libs=module ++ build_old_libs=yes ++ else ++ build_libtool_libs=no ++ fi ++ fi ++ fi ++ fi ++ # Done checking deplibs! ++ deplibs=$newdeplibs ++ fi ++ # Time to change all our "foo.ltframework" stuff back to "-framework foo" ++ case $host in ++ *-*-darwin*) ++ newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ++ new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ++ deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; ++ esac + ++ # move library search paths that coincide with paths to not yet ++ # installed libraries to the beginning of the library search list ++ new_libs= ++ for path in $notinst_path; do ++ case " $new_libs " in ++ *" -L$path/$objdir "*) ;; + *) +- $echo >> $output "\ +- exec \"\$progdir/\$program\" \${1+\"\$@\"} +-" ++ case " $deplibs " in ++ *" -L$path/$objdir "*) ++ new_libs="$new_libs -L$path/$objdir" ;; ++ esac + ;; + esac +- $echo >> $output "\ +- \$echo \"\$0: cannot exec \$program \$*\" +- exit $EXIT_FAILURE +- fi +- else +- # The program doesn't exist. +- \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 +- \$echo \"This script is just a wrapper for \$program.\" 1>&2 +- $echo \"See the $PACKAGE documentation for more information.\" 1>&2 +- exit $EXIT_FAILURE +- fi +-fi\ +-" +- chmod +x $output +- fi +- exit $EXIT_SUCCESS +- ;; +- esac ++ done ++ for deplib in $deplibs; do ++ case $deplib in ++ -L*) ++ case " $new_libs " in ++ *" $deplib "*) ;; ++ *) new_libs="$new_libs $deplib" ;; ++ esac ++ ;; ++ *) new_libs="$new_libs $deplib" ;; ++ esac ++ done ++ deplibs="$new_libs" + +- # See if we need to build an old-fashioned archive. +- for oldlib in $oldlibs; do ++ # All the library-specific variables (install_libdir is set above). ++ library_names= ++ old_library= ++ dlname= + +- if test "$build_libtool_libs" = convenience; then +- oldobjs="$libobjs_save" +- addlibs="$convenience" +- build_libtool_libs=no +- else +- if test "$build_libtool_libs" = module; then +- oldobjs="$libobjs_save" +- build_libtool_libs=no +- else +- oldobjs="$old_deplibs $non_pic_objects" ++ # Test again, we may have decided not to build it any more ++ if test "$build_libtool_libs" = yes; then ++ if test "$hardcode_into_libs" = yes; then ++ # Hardcode the library paths ++ hardcode_libdirs= ++ dep_rpath= ++ rpath="$finalize_rpath" ++ test "$mode" != relink && rpath="$compile_rpath$rpath" ++ for libdir in $rpath; do ++ if test -n "$hardcode_libdir_flag_spec"; then ++ if test -n "$hardcode_libdir_separator"; then ++ if test -z "$hardcode_libdirs"; then ++ hardcode_libdirs="$libdir" ++ else ++ # Just accumulate the unique libdirs. ++ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in ++ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ++ ;; ++ *) ++ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ++ ;; ++ esac ++ fi ++ else ++ eval flag=\"$hardcode_libdir_flag_spec\" ++ dep_rpath="$dep_rpath $flag" ++ fi ++ elif test -n "$runpath_var"; then ++ case "$perm_rpath " in ++ *" $libdir "*) ;; ++ *) perm_rpath="$perm_rpath $libdir" ;; ++ esac ++ fi ++ done ++ # Substitute the hardcoded libdirs into the rpath. ++ if test -n "$hardcode_libdir_separator" && ++ test -n "$hardcode_libdirs"; then ++ libdir="$hardcode_libdirs" ++ if test -n "$hardcode_libdir_flag_spec_ld"; then ++ eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ++ else ++ eval dep_rpath=\"$hardcode_libdir_flag_spec\" ++ fi ++ fi ++ if test -n "$runpath_var" && test -n "$perm_rpath"; then ++ # We should set the runpath_var. ++ rpath= ++ for dir in $perm_rpath; do ++ rpath="$rpath$dir:" ++ done ++ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" ++ fi ++ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" + fi +- addlibs="$old_convenience" +- fi + +- if test -n "$addlibs"; then +- gentop="$output_objdir/${outputname}x" +- generated="$generated $gentop" ++ shlibpath="$finalize_shlibpath" ++ test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" ++ if test -n "$shlibpath"; then ++ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" ++ fi + +- func_extract_archives $gentop $addlibs +- oldobjs="$oldobjs $func_extract_archives_result" +- fi ++ # Get the real and link names of the library. ++ eval shared_ext=\"$shrext_cmds\" ++ eval library_names=\"$library_names_spec\" ++ set dummy $library_names ++ shift ++ realname="$1" ++ shift + +- # Do each command in the archive commands. +- if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then +- cmds=$old_archive_from_new_cmds +- else +- # POSIX demands no paths to be encoded in archives. We have +- # to avoid creating archives with duplicate basenames if we +- # might have to extract them afterwards, e.g., when creating a +- # static archive out of a convenience library, or when linking +- # the entirety of a libtool archive into another (currently +- # not supported by libtool). +- if (for obj in $oldobjs +- do +- $echo "X$obj" | $Xsed -e 's%^.*/%%' +- done | sort | sort -uc >/dev/null 2>&1); then +- : ++ if test -n "$soname_spec"; then ++ eval soname=\"$soname_spec\" + else +- $echo "copying selected object files to avoid basename conflicts..." ++ soname="$realname" ++ fi ++ if test -z "$dlname"; then ++ dlname=$soname ++ fi + +- if test -z "$gentop"; then +- gentop="$output_objdir/${outputname}x" +- generated="$generated $gentop" ++ lib="$output_objdir/$realname" ++ linknames= ++ for link ++ do ++ linknames="$linknames $link" ++ done + +- $show "${rm}r $gentop" +- $run ${rm}r "$gentop" +- $show "$mkdir $gentop" +- $run $mkdir "$gentop" +- exit_status=$? +- if test "$exit_status" -ne 0 && test ! -d "$gentop"; then +- exit $exit_status ++ # Use standard objects if they are pic ++ test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` ++ test "X$libobjs" = "X " && libobjs= ++ ++ delfiles= ++ if test -n "$export_symbols" && test -n "$include_expsyms"; then ++ $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" ++ export_symbols="$output_objdir/$libname.uexp" ++ delfiles="$delfiles $export_symbols" ++ fi ++ ++ orig_export_symbols= ++ case $host_os in ++ cygwin* | mingw*) ++ if test -n "$export_symbols" && test -z "$export_symbols_regex"; then ++ # exporting using user supplied symfile ++ if test "x`$SED 1q $export_symbols`" != xEXPORTS; then ++ # and it's NOT already a .def file. Must figure out ++ # which of the given symbols are data symbols and tag ++ # them as such. So, trigger use of export_symbols_cmds. ++ # export_symbols gets reassigned inside the "prepare ++ # the list of exported symbols" if statement, so the ++ # include_expsyms logic still works. ++ orig_export_symbols="$export_symbols" ++ export_symbols= ++ always_export_symbols=yes + fi + fi ++ ;; ++ esac + +- save_oldobjs=$oldobjs +- oldobjs= +- counter=1 +- for obj in $save_oldobjs +- do +- objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` +- case " $oldobjs " in +- " ") oldobjs=$obj ;; +- *[\ /]"$objbase "*) +- while :; do +- # Make sure we don't pick an alternate name that also +- # overlaps. +- newobj=lt$counter-$objbase +- counter=`expr $counter + 1` +- case " $oldobjs " in +- *[\ /]"$newobj "*) ;; +- *) if test ! -f "$gentop/$newobj"; then break; fi ;; +- esac +- done +- $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" +- $run ln "$obj" "$gentop/$newobj" || +- $run cp "$obj" "$gentop/$newobj" +- oldobjs="$oldobjs $gentop/$newobj" +- ;; +- *) oldobjs="$oldobjs $obj" ;; +- esac +- done ++ # Prepare the list of exported symbols ++ if test -z "$export_symbols"; then ++ if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then ++ func_verbose "generating symbol list for \`$libname.la'" ++ export_symbols="$output_objdir/$libname.exp" ++ $opt_dry_run || $RM $export_symbols ++ cmds=$export_symbols_cmds ++ save_ifs="$IFS"; IFS='~' ++ for cmd in $cmds; do ++ IFS="$save_ifs" ++ eval cmd=\"$cmd\" ++ func_len " $cmd" ++ len=$func_len_result ++ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then ++ func_show_eval "$cmd" 'exit $?' ++ skipped_export=false ++ else ++ # The command line is too long to execute in one step. ++ func_verbose "using reloadable object file for export list..." ++ skipped_export=: ++ # Break out early, otherwise skipped_export may be ++ # set to false by a later but shorter cmd. ++ break ++ fi ++ done ++ IFS="$save_ifs" ++ if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then ++ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' ++ func_show_eval '$MV "${export_symbols}T" "$export_symbols"' ++ fi ++ fi + fi + +- eval cmds=\"$old_archive_cmds\" ++ if test -n "$export_symbols" && test -n "$include_expsyms"; then ++ tmp_export_symbols="$export_symbols" ++ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" ++ $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' ++ fi ++ ++ if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then ++ # The given exports_symbols file has to be filtered, so filter it. ++ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" ++ # FIXME: $output_objdir/$libname.filter potentially contains lots of ++ # 's' commands which not all seds can handle. GNU sed should be fine ++ # though. Also, the filter scales superlinearly with the number of ++ # global variables. join(1) would be nice here, but unfortunately ++ # isn't a blessed tool. ++ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter ++ delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" ++ export_symbols=$output_objdir/$libname.def ++ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols ++ fi + +- if len=`expr "X$cmds" : ".*"` && +- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then +- cmds=$old_archive_cmds +- else +- # the command line is too long to link in one step, link in parts +- $echo "using piecewise archive linking..." +- save_RANLIB=$RANLIB +- RANLIB=: +- objlist= +- concat_cmds= +- save_oldobjs=$oldobjs ++ tmp_deplibs= ++ for test_deplib in $deplibs; do ++ case " $convenience " in ++ *" $test_deplib "*) ;; ++ *) ++ tmp_deplibs="$tmp_deplibs $test_deplib" ++ ;; ++ esac ++ done ++ deplibs="$tmp_deplibs" + +- # Is there a better way of finding the last object in the list? +- for obj in $save_oldobjs +- do +- last_oldobj=$obj +- done +- for obj in $save_oldobjs +- do +- oldobjs="$objlist $obj" +- objlist="$objlist $obj" +- eval test_cmds=\"$old_archive_cmds\" +- if len=`expr "X$test_cmds" : ".*" 2>/dev/null` && +- test "$len" -le "$max_cmd_len"; then +- : +- else +- # the above command should be used before it gets too long +- oldobjs=$objlist +- if test "$obj" = "$last_oldobj" ; then +- RANLIB=$save_RANLIB +- fi +- test -z "$concat_cmds" || concat_cmds=$concat_cmds~ +- eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" +- objlist= +- fi +- done +- RANLIB=$save_RANLIB +- oldobjs=$objlist +- if test "X$oldobjs" = "X" ; then +- eval cmds=\"\$concat_cmds\" ++ if test -n "$convenience"; then ++ if test -n "$whole_archive_flag_spec" && ++ test "$compiler_needs_object" = yes && ++ test -z "$libobjs"; then ++ # extract the archives, so we have objects to list. ++ # TODO: could optimize this to just extract one archive. ++ whole_archive_flag_spec= ++ fi ++ if test -n "$whole_archive_flag_spec"; then ++ save_libobjs=$libobjs ++ eval libobjs=\"\$libobjs $whole_archive_flag_spec\" ++ test "X$libobjs" = "X " && libobjs= + else +- eval cmds=\"\$concat_cmds~\$old_archive_cmds\" ++ gentop="$output_objdir/${outputname}x" ++ generated="$generated $gentop" ++ ++ func_extract_archives $gentop $convenience ++ libobjs="$libobjs $func_extract_archives_result" ++ test "X$libobjs" = "X " && libobjs= + fi + fi +- fi +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- eval cmd=\"$cmd\" +- IFS="$save_ifs" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done +- IFS="$save_ifs" +- done + +- if test -n "$generated"; then +- $show "${rm}r$generated" +- $run ${rm}r$generated +- fi ++ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then ++ eval flag=\"$thread_safe_flag_spec\" ++ linker_flags="$linker_flags $flag" ++ fi + +- # Now create the libtool archive. +- case $output in +- *.la) +- old_library= +- test "$build_old_libs" = yes && old_library="$libname.$libext" +- $show "creating $output" ++ # Make a backup of the uninstalled library when relinking ++ if test "$mode" = relink; then ++ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? ++ fi + +- # Preserve any variables that may affect compiler behavior +- for var in $variables_saved_for_relink; do +- if eval test -z \"\${$var+set}\"; then +- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" +- elif eval var_value=\$$var; test -z "$var_value"; then +- relink_command="$var=; export $var; $relink_command" ++ # Do each of the archive commands. ++ if test "$module" = yes && test -n "$module_cmds" ; then ++ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then ++ eval test_cmds=\"$module_expsym_cmds\" ++ cmds=$module_expsym_cmds ++ else ++ eval test_cmds=\"$module_cmds\" ++ cmds=$module_cmds ++ fi + else +- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` +- relink_command="$var=\"$var_value\"; export $var; $relink_command" ++ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then ++ eval test_cmds=\"$archive_expsym_cmds\" ++ cmds=$archive_expsym_cmds ++ else ++ eval test_cmds=\"$archive_cmds\" ++ cmds=$archive_cmds ++ fi + fi +- done +- # Quote the link command for shipping. +- relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" +- relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP` +- if test "$hardcode_automatic" = yes ; then +- relink_command= +- fi + ++ if test "X$skipped_export" != "X:" && ++ func_len " $test_cmds" && ++ len=$func_len_result && ++ test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then ++ : ++ else ++ # The command line is too long to link in one step, link piecewise ++ # or, if using GNU ld and skipped_export is not :, use a linker ++ # script. + +- # Only create the output if not a dry run. +- if test -z "$run"; then +- for installed in no yes; do +- if test "$installed" = yes; then +- if test -z "$install_libdir"; then +- break ++ # Save the value of $output and $libobjs because we want to ++ # use them later. If we have whole_archive_flag_spec, we ++ # want to use save_libobjs as it was before ++ # whole_archive_flag_spec was expanded, because we can't ++ # assume the linker understands whole_archive_flag_spec. ++ # This may have to be revisited, in case too many ++ # convenience libraries get linked in and end up exceeding ++ # the spec. ++ if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then ++ save_libobjs=$libobjs ++ fi ++ save_output=$output ++ output_la=`$ECHO "X$output" | $Xsed -e "$basename"` ++ ++ # Clear the reloadable object creation command queue and ++ # initialize k to one. ++ test_cmds= ++ concat_cmds= ++ objlist= ++ last_robj= ++ k=1 ++ ++ if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then ++ output=${output_objdir}/${output_la}.lnkscript ++ func_verbose "creating GNU ld script: $output" ++ $ECHO 'INPUT (' > $output ++ for obj in $save_libobjs ++ do ++ $ECHO "$obj" >> $output ++ done ++ $ECHO ')' >> $output ++ delfiles="$delfiles $output" ++ elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then ++ output=${output_objdir}/${output_la}.lnk ++ func_verbose "creating linker input file list: $output" ++ : > $output ++ set x $save_libobjs ++ shift ++ firstobj= ++ if test "$compiler_needs_object" = yes; then ++ firstobj="$1 " ++ shift + fi +- output="$output_objdir/$outputname"i +- # Replace all uninstalled libtool libraries with the installed ones +- newdependency_libs= +- for deplib in $dependency_libs; do +- case $deplib in +- *.la) +- name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` +- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` +- if test -z "$libdir"; then +- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 +- exit $EXIT_FAILURE +- fi +- newdependency_libs="$newdependency_libs $libdir/$name" +- ;; +- *) newdependency_libs="$newdependency_libs $deplib" ;; +- esac ++ for obj ++ do ++ $ECHO "$obj" >> $output + done +- dependency_libs="$newdependency_libs" +- newdlfiles= +- for lib in $dlfiles; do +- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` +- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` +- if test -z "$libdir"; then +- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 +- exit $EXIT_FAILURE ++ delfiles="$delfiles $output" ++ output=$firstobj\"$file_list_spec$output\" ++ else ++ if test -n "$save_libobjs"; then ++ func_verbose "creating reloadable object files..." ++ output=$output_objdir/$output_la-${k}.$objext ++ eval test_cmds=\"$reload_cmds\" ++ func_len " $test_cmds" ++ len0=$func_len_result ++ len=$len0 ++ ++ # Loop over the list of objects to be linked. ++ for obj in $save_libobjs ++ do ++ func_len " $obj" ++ func_arith $len + $func_len_result ++ len=$func_arith_result ++ if test "X$objlist" = X || ++ test "$len" -lt "$max_cmd_len"; then ++ func_append objlist " $obj" ++ else ++ # The command $test_cmds is almost too long, add a ++ # command to the queue. ++ if test "$k" -eq 1 ; then ++ # The first file doesn't have a previous command to add. ++ eval concat_cmds=\"$reload_cmds $objlist $last_robj\" ++ else ++ # All subsequent reloadable object files will link in ++ # the last one created. ++ eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\" ++ fi ++ last_robj=$output_objdir/$output_la-${k}.$objext ++ func_arith $k + 1 ++ k=$func_arith_result ++ output=$output_objdir/$output_la-${k}.$objext ++ objlist=$obj ++ func_len " $last_robj" ++ func_arith $len0 + $func_len_result ++ len=$func_arith_result ++ fi ++ done ++ # Handle the remaining objects by creating one last ++ # reloadable object file. All subsequent reloadable object ++ # files will link in the last one created. ++ test -z "$concat_cmds" || concat_cmds=$concat_cmds~ ++ eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" ++ if test -n "$last_robj"; then ++ eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" + fi +- newdlfiles="$newdlfiles $libdir/$name" +- done +- dlfiles="$newdlfiles" +- newdlprefiles= +- for lib in $dlprefiles; do +- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` +- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` +- if test -z "$libdir"; then +- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 +- exit $EXIT_FAILURE ++ delfiles="$delfiles $output" ++ ++ else ++ output= ++ fi ++ ++ if ${skipped_export-false}; then ++ func_verbose "generating symbol list for \`$libname.la'" ++ export_symbols="$output_objdir/$libname.exp" ++ $opt_dry_run || $RM $export_symbols ++ libobjs=$output ++ # Append the command to create the export file. ++ test -z "$concat_cmds" || concat_cmds=$concat_cmds~ ++ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" ++ if test -n "$last_robj"; then ++ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" + fi +- newdlprefiles="$newdlprefiles $libdir/$name" +- done +- dlprefiles="$newdlprefiles" +- else +- newdlfiles= +- for lib in $dlfiles; do +- case $lib in +- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; +- *) abs=`pwd`"/$lib" ;; +- esac +- newdlfiles="$newdlfiles $abs" +- done +- dlfiles="$newdlfiles" +- newdlprefiles= +- for lib in $dlprefiles; do +- case $lib in +- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; +- *) abs=`pwd`"/$lib" ;; +- esac +- newdlprefiles="$newdlprefiles $abs" ++ fi ++ ++ test -n "$save_libobjs" && ++ func_verbose "creating a temporary reloadable object file: $output" ++ ++ # Loop through the commands generated above and execute them. ++ save_ifs="$IFS"; IFS='~' ++ for cmd in $concat_cmds; do ++ IFS="$save_ifs" ++ $opt_silent || { ++ func_quote_for_expand "$cmd" ++ eval "func_echo $func_quote_for_expand_result" ++ } ++ $opt_dry_run || eval "$cmd" || { ++ lt_exit=$? ++ ++ # Restore the uninstalled library and exit ++ if test "$mode" = relink; then ++ ( cd "$output_objdir" && \ ++ $RM "${realname}T" && \ ++ $MV "${realname}U" "$realname" ) ++ fi ++ ++ exit $lt_exit ++ } + done +- dlprefiles="$newdlprefiles" ++ IFS="$save_ifs" ++ ++ if test -n "$export_symbols_regex" && ${skipped_export-false}; then ++ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' ++ func_show_eval '$MV "${export_symbols}T" "$export_symbols"' ++ fi + fi +- $rm $output +- # place dlname in correct position for cygwin +- tdlname=$dlname +- case $host,$output,$installed,$module,$dlname in +- *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; +- esac +- $echo > $output "\ +-# $outputname - a libtool library file +-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +-# +-# Please DO NOT delete this file! +-# It is necessary for linking the library. + +-# The name that we can dlopen(3). +-dlname='$tdlname' ++ if ${skipped_export-false}; then ++ if test -n "$export_symbols" && test -n "$include_expsyms"; then ++ tmp_export_symbols="$export_symbols" ++ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" ++ $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' ++ fi ++ ++ if test -n "$orig_export_symbols"; then ++ # The given exports_symbols file has to be filtered, so filter it. ++ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" ++ # FIXME: $output_objdir/$libname.filter potentially contains lots of ++ # 's' commands which not all seds can handle. GNU sed should be fine ++ # though. Also, the filter scales superlinearly with the number of ++ # global variables. join(1) would be nice here, but unfortunately ++ # isn't a blessed tool. ++ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter ++ delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" ++ export_symbols=$output_objdir/$libname.def ++ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols ++ fi ++ fi + +-# Names of this library. +-library_names='$library_names' ++ libobjs=$output ++ # Restore the value of output. ++ output=$save_output + +-# The name of the static archive. +-old_library='$old_library' ++ if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then ++ eval libobjs=\"\$libobjs $whole_archive_flag_spec\" ++ test "X$libobjs" = "X " && libobjs= ++ fi ++ # Expand the library linking commands again to reset the ++ # value of $libobjs for piecewise linking. + +-# Libraries that this one depends upon. +-dependency_libs='$dependency_libs' ++ # Do each of the archive commands. ++ if test "$module" = yes && test -n "$module_cmds" ; then ++ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then ++ cmds=$module_expsym_cmds ++ else ++ cmds=$module_cmds ++ fi ++ else ++ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then ++ cmds=$archive_expsym_cmds ++ else ++ cmds=$archive_cmds ++ fi ++ fi ++ fi + +-# Version information for $libname. +-current=$current +-age=$age +-revision=$revision ++ if test -n "$delfiles"; then ++ # Append the command to remove temporary files to $cmds. ++ eval cmds=\"\$cmds~\$RM $delfiles\" ++ fi + +-# Is this an already installed library? +-installed=$installed ++ # Add any objects from preloaded convenience libraries ++ if test -n "$dlprefiles"; then ++ gentop="$output_objdir/${outputname}x" ++ generated="$generated $gentop" + +-# Should we warn about portability when linking against -modules? +-shouldnotlink=$module ++ func_extract_archives $gentop $dlprefiles ++ libobjs="$libobjs $func_extract_archives_result" ++ test "X$libobjs" = "X " && libobjs= ++ fi + +-# Files to dlopen/dlpreopen +-dlopen='$dlfiles' +-dlpreopen='$dlprefiles' ++ save_ifs="$IFS"; IFS='~' ++ for cmd in $cmds; do ++ IFS="$save_ifs" ++ eval cmd=\"$cmd\" ++ $opt_silent || { ++ func_quote_for_expand "$cmd" ++ eval "func_echo $func_quote_for_expand_result" ++ } ++ $opt_dry_run || eval "$cmd" || { ++ lt_exit=$? + +-# Directory that this library needs to be installed in: +-libdir='$install_libdir'" +- if test "$installed" = no && test "$need_relink" = yes; then +- $echo >> $output "\ +-relink_command=\"$relink_command\"" +- fi ++ # Restore the uninstalled library and exit ++ if test "$mode" = relink; then ++ ( cd "$output_objdir" && \ ++ $RM "${realname}T" && \ ++ $MV "${realname}U" "$realname" ) ++ fi ++ ++ exit $lt_exit ++ } + done +- fi ++ IFS="$save_ifs" + +- # Do a symbolic link so that the libtool archive can be found in +- # LD_LIBRARY_PATH before the program is installed. +- $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" +- $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? +- ;; +- esac +- exit $EXIT_SUCCESS +- ;; ++ # Restore the uninstalled library and exit ++ if test "$mode" = relink; then ++ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? + +- # libtool install mode +- install) +- modename="$modename: install" ++ if test -n "$convenience"; then ++ if test -z "$whole_archive_flag_spec"; then ++ func_show_eval '${RM}r "$gentop"' ++ fi ++ fi + +- # There may be an optional sh(1) argument at the beginning of +- # install_prog (especially on Windows NT). +- if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || +- # Allow the use of GNU shtool's install command. +- $echo "X$nonopt" | grep shtool > /dev/null; then +- # Aesthetically quote it. +- arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` +- case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac +- install_prog="$arg " +- arg="$1" +- shift +- else +- install_prog= +- arg=$nonopt +- fi ++ exit $EXIT_SUCCESS ++ fi + +- # The real first argument should be the name of the installation program. +- # Aesthetically quote it. +- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` +- case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac +- install_prog="$install_prog$arg" ++ # Create links to the real library. ++ for linkname in $linknames; do ++ if test "$realname" != "$linkname"; then ++ func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' ++ fi ++ done + +- # We need to accept at least all the BSD install flags. +- dest= +- files= +- opts= +- prev= +- install_type= +- isdir=no +- stripme= +- for arg +- do +- if test -n "$dest"; then +- files="$files $dest" +- dest=$arg +- continue ++ # If -module or -export-dynamic was specified, set the dlname. ++ if test "$module" = yes || test "$export_dynamic" = yes; then ++ # On all known operating systems, these are identical. ++ dlname="$soname" ++ fi + fi ++ ;; + +- case $arg in +- -d) isdir=yes ;; +- -f) +- case " $install_prog " in +- *[\\\ /]cp\ *) ;; +- *) prev=$arg ;; +- esac +- ;; +- -g | -m | -o) prev=$arg ;; +- -s) +- stripme=" -s" +- continue +- ;; +- -*) ++ obj) ++ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then ++ func_warning "\`-dlopen' is ignored for objects" ++ fi ++ ++ case " $deplibs" in ++ *\ -l* | *\ -L*) ++ func_warning "\`-l' and \`-L' are ignored for objects" ;; ++ esac ++ ++ test -n "$rpath" && \ ++ func_warning "\`-rpath' is ignored for objects" ++ ++ test -n "$xrpath" && \ ++ func_warning "\`-R' is ignored for objects" ++ ++ test -n "$vinfo" && \ ++ func_warning "\`-version-info' is ignored for objects" ++ ++ test -n "$release" && \ ++ func_warning "\`-release' is ignored for objects" ++ ++ case $output in ++ *.lo) ++ test -n "$objs$old_deplibs" && \ ++ func_fatal_error "cannot build library object \`$output' from non-libtool objects" ++ ++ libobj=$output ++ func_lo2o "$libobj" ++ obj=$func_lo2o_result + ;; + *) +- # If the previous option needed an argument, then skip it. +- if test -n "$prev"; then +- prev= +- else +- dest=$arg +- continue +- fi ++ libobj= ++ obj="$output" + ;; + esac + +- # Aesthetically quote the argument. +- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` +- case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac +- install_prog="$install_prog $arg" +- done ++ # Delete the old objects. ++ $opt_dry_run || $RM $obj $libobj + +- if test -z "$install_prog"; then +- $echo "$modename: you must specify an install program" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- fi ++ # Objects from convenience libraries. This assumes ++ # single-version convenience libraries. Whenever we create ++ # different ones for PIC/non-PIC, this we'll have to duplicate ++ # the extraction. ++ reload_conv_objs= ++ gentop= ++ # reload_cmds runs $LD directly, so let us get rid of ++ # -Wl from whole_archive_flag_spec and hope we can get by with ++ # turning comma into space.. ++ wl= + +- if test -n "$prev"; then +- $echo "$modename: the \`$prev' option requires an argument" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- fi ++ if test -n "$convenience"; then ++ if test -n "$whole_archive_flag_spec"; then ++ eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" ++ reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` ++ else ++ gentop="$output_objdir/${obj}x" ++ generated="$generated $gentop" + +- if test -z "$files"; then +- if test -z "$dest"; then +- $echo "$modename: no file or destination specified" 1>&2 +- else +- $echo "$modename: you must specify a destination" 1>&2 ++ func_extract_archives $gentop $convenience ++ reload_conv_objs="$reload_objs $func_extract_archives_result" ++ fi + fi +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- fi + +- # Strip any trailing slash from the destination. +- dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` ++ # Create the old-style object. ++ reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + +- # Check to see that the destination is a directory. +- test -d "$dest" && isdir=yes +- if test "$isdir" = yes; then +- destdir="$dest" +- destname= +- else +- destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` +- test "X$destdir" = "X$dest" && destdir=. +- destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` ++ output="$obj" ++ func_execute_cmds "$reload_cmds" 'exit $?' + +- # Not a directory, so check to see that there is only one file specified. +- set dummy $files +- if test "$#" -gt 2; then +- $echo "$modename: \`$dest' is not a directory" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE ++ # Exit if we aren't doing a library object file. ++ if test -z "$libobj"; then ++ if test -n "$gentop"; then ++ func_show_eval '${RM}r "$gentop"' ++ fi ++ ++ exit $EXIT_SUCCESS + fi +- fi +- case $destdir in +- [\\/]* | [A-Za-z]:[\\/]*) ;; +- *) +- for file in $files; do +- case $file in +- *.lo) ;; +- *) +- $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac +- done ++ ++ if test "$build_libtool_libs" != yes; then ++ if test -n "$gentop"; then ++ func_show_eval '${RM}r "$gentop"' ++ fi ++ ++ # Create an invalid libtool object if no PIC, so that we don't ++ # accidentally link it into a program. ++ # $show "echo timestamp > $libobj" ++ # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? ++ exit $EXIT_SUCCESS ++ fi ++ ++ if test -n "$pic_flag" || test "$pic_mode" != default; then ++ # Only do commands if we really have different PIC objects. ++ reload_objs="$libobjs $reload_conv_objs" ++ output="$libobj" ++ func_execute_cmds "$reload_cmds" 'exit $?' ++ fi ++ ++ if test -n "$gentop"; then ++ func_show_eval '${RM}r "$gentop"' ++ fi ++ ++ exit $EXIT_SUCCESS + ;; +- esac + +- # This variable tells wrapper scripts just to set variables rather +- # than running their programs. +- libtool_install_magic="$magic" ++ prog) ++ case $host in ++ *cygwin*) func_stripname '' '.exe' "$output" ++ output=$func_stripname_result.exe;; ++ esac ++ test -n "$vinfo" && \ ++ func_warning "\`-version-info' is ignored for programs" + +- staticlibs= +- future_libdirs= +- current_libdirs= +- for file in $files; do ++ test -n "$release" && \ ++ func_warning "\`-release' is ignored for programs" + +- # Do each installation. +- case $file in +- *.$libext) +- # Do the static libraries later. +- staticlibs="$staticlibs $file" ++ test "$preload" = yes \ ++ && test "$dlopen_support" = unknown \ ++ && test "$dlopen_self" = unknown \ ++ && test "$dlopen_self_static" = unknown && \ ++ func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." ++ ++ case $host in ++ *-*-rhapsody* | *-*-darwin1.[012]) ++ # On Rhapsody replace the C library is the System framework ++ compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` ++ finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` + ;; ++ esac + +- *.la) +- # Check to see that this really is a libtool archive. +- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : +- else +- $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE ++ case $host in ++ *-*-darwin*) ++ # Don't allow lazy linking, it breaks C++ global constructors ++ # But is supposedly fixed on 10.4 or later (yay!). ++ if test "$tagname" = CXX ; then ++ case ${MACOSX_DEPLOYMENT_TARGET-10.0} in ++ 10.[0123]) ++ compile_command="$compile_command ${wl}-bind_at_load" ++ finalize_command="$finalize_command ${wl}-bind_at_load" ++ ;; ++ esac + fi ++ # Time to change all our "foo.ltframework" stuff back to "-framework foo" ++ compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ++ finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ++ ;; ++ esac + +- library_names= +- old_library= +- relink_command= +- # If there is no directory component, then add one. +- case $file in +- */* | *\\*) . $file ;; +- *) . ./$file ;; +- esac + +- # Add the libdir to current_libdirs if it is the destination. +- if test "X$destdir" = "X$libdir"; then +- case "$current_libdirs " in +- *" $libdir "*) ;; +- *) current_libdirs="$current_libdirs $libdir" ;; ++ # move library search paths that coincide with paths to not yet ++ # installed libraries to the beginning of the library search list ++ new_libs= ++ for path in $notinst_path; do ++ case " $new_libs " in ++ *" -L$path/$objdir "*) ;; ++ *) ++ case " $compile_deplibs " in ++ *" -L$path/$objdir "*) ++ new_libs="$new_libs -L$path/$objdir" ;; + esac +- else +- # Note the libdir as a future libdir. +- case "$future_libdirs " in +- *" $libdir "*) ;; +- *) future_libdirs="$future_libdirs $libdir" ;; ++ ;; ++ esac ++ done ++ for deplib in $compile_deplibs; do ++ case $deplib in ++ -L*) ++ case " $new_libs " in ++ *" $deplib "*) ;; ++ *) new_libs="$new_libs $deplib" ;; + esac +- fi ++ ;; ++ *) new_libs="$new_libs $deplib" ;; ++ esac ++ done ++ compile_deplibs="$new_libs" + +- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ +- test "X$dir" = "X$file/" && dir= +- dir="$dir$objdir" + +- if test -n "$relink_command"; then +- # Determine the prefix the user has applied to our future dir. +- inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"` ++ compile_command="$compile_command $compile_deplibs" ++ finalize_command="$finalize_command $finalize_deplibs" + +- # Don't allow the user to place us outside of our expected +- # location b/c this prevents finding dependent libraries that +- # are installed to the same prefix. +- # At present, this check doesn't affect windows .dll's that +- # are installed into $libdir/../bin (currently, that works fine) +- # but it's something to keep an eye on. +- if test "$inst_prefix_dir" = "$destdir"; then +- $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2 +- exit $EXIT_FAILURE +- fi ++ if test -n "$rpath$xrpath"; then ++ # If the user specified any rpath flags, then add them. ++ for libdir in $rpath $xrpath; do ++ # This is the magic to use -rpath. ++ case "$finalize_rpath " in ++ *" $libdir "*) ;; ++ *) finalize_rpath="$finalize_rpath $libdir" ;; ++ esac ++ done ++ fi + +- if test -n "$inst_prefix_dir"; then +- # Stick the inst_prefix_dir data into the link command. +- relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP` ++ # Now hardcode the library paths ++ rpath= ++ hardcode_libdirs= ++ for libdir in $compile_rpath $finalize_rpath; do ++ if test -n "$hardcode_libdir_flag_spec"; then ++ if test -n "$hardcode_libdir_separator"; then ++ if test -z "$hardcode_libdirs"; then ++ hardcode_libdirs="$libdir" ++ else ++ # Just accumulate the unique libdirs. ++ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in ++ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ++ ;; ++ *) ++ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ++ ;; ++ esac ++ fi + else +- relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP` ++ eval flag=\"$hardcode_libdir_flag_spec\" ++ rpath="$rpath $flag" + fi ++ elif test -n "$runpath_var"; then ++ case "$perm_rpath " in ++ *" $libdir "*) ;; ++ *) perm_rpath="$perm_rpath $libdir" ;; ++ esac ++ fi ++ case $host in ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) ++ testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` ++ case :$dllsearchpath: in ++ *":$libdir:"*) ;; ++ *) dllsearchpath="$dllsearchpath:$libdir";; ++ esac ++ case :$dllsearchpath: in ++ *":$testbindir:"*) ;; ++ *) dllsearchpath="$dllsearchpath:$testbindir";; ++ esac ++ ;; ++ esac ++ done ++ # Substitute the hardcoded libdirs into the rpath. ++ if test -n "$hardcode_libdir_separator" && ++ test -n "$hardcode_libdirs"; then ++ libdir="$hardcode_libdirs" ++ eval rpath=\" $hardcode_libdir_flag_spec\" ++ fi ++ compile_rpath="$rpath" + +- $echo "$modename: warning: relinking \`$file'" 1>&2 +- $show "$relink_command" +- if $run eval "$relink_command"; then : ++ rpath= ++ hardcode_libdirs= ++ for libdir in $finalize_rpath; do ++ if test -n "$hardcode_libdir_flag_spec"; then ++ if test -n "$hardcode_libdir_separator"; then ++ if test -z "$hardcode_libdirs"; then ++ hardcode_libdirs="$libdir" ++ else ++ # Just accumulate the unique libdirs. ++ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in ++ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ++ ;; ++ *) ++ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ++ ;; ++ esac ++ fi + else +- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 +- exit $EXIT_FAILURE ++ eval flag=\"$hardcode_libdir_flag_spec\" ++ rpath="$rpath $flag" + fi ++ elif test -n "$runpath_var"; then ++ case "$finalize_perm_rpath " in ++ *" $libdir "*) ;; ++ *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; ++ esac + fi ++ done ++ # Substitute the hardcoded libdirs into the rpath. ++ if test -n "$hardcode_libdir_separator" && ++ test -n "$hardcode_libdirs"; then ++ libdir="$hardcode_libdirs" ++ eval rpath=\" $hardcode_libdir_flag_spec\" ++ fi ++ finalize_rpath="$rpath" + +- # See the names of the shared library. +- set dummy $library_names +- if test -n "$2"; then +- realname="$2" +- shift +- shift ++ if test -n "$libobjs" && test "$build_old_libs" = yes; then ++ # Transform all the library objects into standard objects. ++ compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` ++ finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` ++ fi + +- srcname="$realname" +- test -n "$relink_command" && srcname="$realname"T ++ func_generate_dlsyms "$outputname" "@PROGRAM@" "no" + +- # Install the shared library and build the symlinks. +- $show "$install_prog $dir/$srcname $destdir/$realname" +- $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? +- if test -n "$stripme" && test -n "$striplib"; then +- $show "$striplib $destdir/$realname" +- $run eval "$striplib $destdir/$realname" || exit $? +- fi ++ # template prelinking step ++ if test -n "$prelink_cmds"; then ++ func_execute_cmds "$prelink_cmds" 'exit $?' ++ fi + +- if test "$#" -gt 0; then +- # Delete the old symlinks, and create new ones. +- # Try `ln -sf' first, because the `ln' binary might depend on +- # the symlink we replace! Solaris /bin/ln does not understand -f, +- # so we also need to try rm && ln -s. +- for linkname +- do +- if test "$linkname" != "$realname"; then +- $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" +- $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" +- fi +- done +- fi ++ wrappers_required=yes ++ case $host in ++ *cygwin* | *mingw* ) ++ if test "$build_libtool_libs" != yes; then ++ wrappers_required=no ++ fi ++ ;; ++ *) ++ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then ++ wrappers_required=no ++ fi ++ ;; ++ esac ++ if test "$wrappers_required" = no; then ++ # Replace the output file specification. ++ compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` ++ link_command="$compile_command$compile_rpath" + +- # Do each command in the postinstall commands. +- lib="$destdir/$realname" +- cmds=$postinstall_cmds +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $show "$cmd" +- $run eval "$cmd" || { +- lt_exit=$? +- +- # Restore the uninstalled library and exit +- if test "$mode" = relink; then +- $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' +- fi ++ # We have no uninstalled library dependencies, so finalize right now. ++ exit_status=0 ++ func_show_eval "$link_command" 'exit_status=$?' + +- exit $lt_exit +- } +- done +- IFS="$save_ifs" ++ # Delete the generated files. ++ if test -f "$output_objdir/${outputname}S.${objext}"; then ++ func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' + fi + +- # Install the pseudo-library for information purposes. +- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` +- instname="$dir/$name"i +- $show "$install_prog $instname $destdir/$name" +- $run eval "$install_prog $instname $destdir/$name" || exit $? +- +- # Maybe install the static library, too. +- test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" +- ;; ++ exit $exit_status ++ fi + +- *.lo) +- # Install (i.e. copy) a libtool object. ++ if test -n "$compile_shlibpath$finalize_shlibpath"; then ++ compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" ++ fi ++ if test -n "$finalize_shlibpath"; then ++ finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" ++ fi + +- # Figure out destination file name, if it wasn't already specified. +- if test -n "$destname"; then +- destfile="$destdir/$destname" +- else +- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` +- destfile="$destdir/$destfile" ++ compile_var= ++ finalize_var= ++ if test -n "$runpath_var"; then ++ if test -n "$perm_rpath"; then ++ # We should set the runpath_var. ++ rpath= ++ for dir in $perm_rpath; do ++ rpath="$rpath$dir:" ++ done ++ compile_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi +- +- # Deduce the name of the destination old-style object file. +- case $destfile in +- *.lo) +- staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` +- ;; +- *.$objext) +- staticdest="$destfile" +- destfile= +- ;; +- *) +- $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac +- +- # Install the libtool object if requested. +- if test -n "$destfile"; then +- $show "$install_prog $file $destfile" +- $run eval "$install_prog $file $destfile" || exit $? ++ if test -n "$finalize_perm_rpath"; then ++ # We should set the runpath_var. ++ rpath= ++ for dir in $finalize_perm_rpath; do ++ rpath="$rpath$dir:" ++ done ++ finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi ++ fi + +- # Install the old object if enabled. +- if test "$build_old_libs" = yes; then +- # Deduce the name of the old-style object file. +- staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` +- +- $show "$install_prog $staticobj $staticdest" +- $run eval "$install_prog \$staticobj \$staticdest" || exit $? +- fi ++ if test "$no_install" = yes; then ++ # We don't need to create a wrapper script. ++ link_command="$compile_var$compile_command$compile_rpath" ++ # Replace the output file specification. ++ link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` ++ # Delete the old output file. ++ $opt_dry_run || $RM $output ++ # Link the executable and exit ++ func_show_eval "$link_command" 'exit $?' + exit $EXIT_SUCCESS +- ;; ++ fi + +- *) +- # Figure out destination file name, if it wasn't already specified. +- if test -n "$destname"; then +- destfile="$destdir/$destname" ++ if test "$hardcode_action" = relink; then ++ # Fast installation is not supported ++ link_command="$compile_var$compile_command$compile_rpath" ++ relink_command="$finalize_var$finalize_command$finalize_rpath" ++ ++ func_warning "this platform does not like uninstalled shared libraries" ++ func_warning "\`$output' will be relinked during installation" ++ else ++ if test "$fast_install" != no; then ++ link_command="$finalize_var$compile_command$finalize_rpath" ++ if test "$fast_install" = yes; then ++ relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` ++ else ++ # fast_install is set to needless ++ relink_command= ++ fi + else +- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` +- destfile="$destdir/$destfile" ++ link_command="$compile_var$compile_command$compile_rpath" ++ relink_command="$finalize_var$finalize_command$finalize_rpath" + fi ++ fi + +- # If the file is missing, and there is a .exe on the end, strip it +- # because it is most likely a libtool script we actually want to +- # install +- stripped_ext="" +- case $file in +- *.exe) +- if test ! -f "$file"; then +- file=`$echo $file|${SED} 's,.exe$,,'` +- stripped_ext=".exe" +- fi +- ;; +- esac +- +- # Do a test to see if this is really a libtool program. +- case $host in +- *cygwin*|*mingw*) +- wrapper=`$echo $file | ${SED} -e 's,.exe$,,'` +- ;; +- *) +- wrapper=$file +- ;; +- esac +- if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then +- notinst_deplibs= +- relink_command= +- +- # Note that it is not necessary on cygwin/mingw to append a dot to +- # foo even if both foo and FILE.exe exist: automatic-append-.exe +- # behavior happens only for exec(3), not for open(2)! Also, sourcing +- # `FILE.' does not work on cygwin managed mounts. +- # +- # If there is no directory component, then add one. +- case $wrapper in +- */* | *\\*) . ${wrapper} ;; +- *) . ./${wrapper} ;; +- esac +- +- # Check the variables that should have been set. +- if test -z "$notinst_deplibs"; then +- $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 +- exit $EXIT_FAILURE +- fi ++ # Replace the output file specification. ++ link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + +- finalize=yes +- for lib in $notinst_deplibs; do +- # Check to see that each library is installed. +- libdir= +- if test -f "$lib"; then +- # If there is no directory component, then add one. +- case $lib in +- */* | *\\*) . $lib ;; +- *) . ./$lib ;; +- esac +- fi +- libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test +- if test -n "$libdir" && test ! -f "$libfile"; then +- $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 +- finalize=no +- fi +- done ++ # Delete the old output files. ++ $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname + +- relink_command= +- # Note that it is not necessary on cygwin/mingw to append a dot to +- # foo even if both foo and FILE.exe exist: automatic-append-.exe +- # behavior happens only for exec(3), not for open(2)! Also, sourcing +- # `FILE.' does not work on cygwin managed mounts. +- # +- # If there is no directory component, then add one. +- case $wrapper in +- */* | *\\*) . ${wrapper} ;; +- *) . ./${wrapper} ;; +- esac ++ func_show_eval "$link_command" 'exit $?' + +- outputname= +- if test "$fast_install" = no && test -n "$relink_command"; then +- if test "$finalize" = yes && test -z "$run"; then +- tmpdir=`func_mktempdir` +- file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'` +- outputname="$tmpdir/$file" +- # Replace the output file specification. +- relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP` ++ # Now create the wrapper script. ++ func_verbose "creating $output" + +- $show "$relink_command" +- if $run eval "$relink_command"; then : +- else +- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 +- ${rm}r "$tmpdir" +- continue +- fi +- file="$outputname" +- else +- $echo "$modename: warning: cannot relink \`$file'" 1>&2 +- fi ++ # Quote the relink command for shipping. ++ if test -n "$relink_command"; then ++ # Preserve any variables that may affect compiler behavior ++ for var in $variables_saved_for_relink; do ++ if eval test -z \"\${$var+set}\"; then ++ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" ++ elif eval var_value=\$$var; test -z "$var_value"; then ++ relink_command="$var=; export $var; $relink_command" + else +- # Install the binary that we compiled earlier. +- file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` ++ func_quote_for_eval "$var_value" ++ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi +- fi ++ done ++ relink_command="(cd `pwd`; $relink_command)" ++ relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` ++ fi + +- # remove .exe since cygwin /usr/bin/install will append another +- # one anyway +- case $install_prog,$host in +- */usr/bin/install*,*cygwin*) +- case $file:$destfile in +- *.exe:*.exe) +- # this is ok +- ;; +- *.exe:*) +- destfile=$destfile.exe +- ;; +- *:*.exe) +- destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'` +- ;; +- esac +- ;; ++ # Quote $ECHO for shipping. ++ if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then ++ case $progpath in ++ [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; ++ *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; ++ esac ++ qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"` ++ else ++ qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"` ++ fi ++ ++ # Only actually do things if not in dry run mode. ++ $opt_dry_run || { ++ # win32 will think the script is a binary if it has ++ # a .exe suffix, so we strip it off here. ++ case $output in ++ *.exe) func_stripname '' '.exe' "$output" ++ output=$func_stripname_result ;; ++ esac ++ # test for cygwin because mv fails w/o .exe extensions ++ case $host in ++ *cygwin*) ++ exeext=.exe ++ func_stripname '' '.exe' "$outputname" ++ outputname=$func_stripname_result ;; ++ *) exeext= ;; + esac +- $show "$install_prog$stripme $file $destfile" +- $run eval "$install_prog\$stripme \$file \$destfile" || exit $? +- test -n "$outputname" && ${rm}r "$tmpdir" +- ;; +- esac +- done ++ case $host in ++ *cygwin* | *mingw* ) ++ func_dirname_and_basename "$output" "" "." ++ output_name=$func_basename_result ++ output_path=$func_dirname_result ++ cwrappersource="$output_path/$objdir/lt-$output_name.c" ++ cwrapper="$output_path/$output_name.exe" ++ $RM $cwrappersource $cwrapper ++ trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 ++ ++ func_emit_cwrapperexe_src > $cwrappersource ++ ++ # we should really use a build-platform specific compiler ++ # here, but OTOH, the wrappers (shell script and this C one) ++ # are only useful if you want to execute the "real" binary. ++ # Since the "real" binary is built for $host, then this ++ # wrapper might as well be built for $host, too. ++ $opt_dry_run || { ++ $LTCC $LTCFLAGS -o $cwrapper $cwrappersource ++ $STRIP $cwrapper ++ } + +- for file in $staticlibs; do +- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` ++ # Now, create the wrapper script for func_source use: ++ func_ltwrapper_scriptname $cwrapper ++ $RM $func_ltwrapper_scriptname_result ++ trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 ++ $opt_dry_run || { ++ # note: this script will not be executed, so do not chmod. ++ if test "x$build" = "x$host" ; then ++ $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result ++ else ++ func_emit_wrapper no > $func_ltwrapper_scriptname_result ++ fi ++ } ++ ;; ++ * ) ++ $RM $output ++ trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 + +- # Set up the ranlib parameters. +- oldlib="$destdir/$name" ++ func_emit_wrapper no > $output ++ chmod +x $output ++ ;; ++ esac ++ } ++ exit $EXIT_SUCCESS ++ ;; ++ esac + +- $show "$install_prog $file $oldlib" +- $run eval "$install_prog \$file \$oldlib" || exit $? ++ # See if we need to build an old-fashioned archive. ++ for oldlib in $oldlibs; do + +- if test -n "$stripme" && test -n "$old_striplib"; then +- $show "$old_striplib $oldlib" +- $run eval "$old_striplib $oldlib" || exit $? ++ if test "$build_libtool_libs" = convenience; then ++ oldobjs="$libobjs_save $symfileobj" ++ addlibs="$convenience" ++ build_libtool_libs=no ++ else ++ if test "$build_libtool_libs" = module; then ++ oldobjs="$libobjs_save" ++ build_libtool_libs=no ++ else ++ oldobjs="$old_deplibs $non_pic_objects" ++ if test "$preload" = yes && test -f "$symfileobj"; then ++ oldobjs="$oldobjs $symfileobj" ++ fi ++ fi ++ addlibs="$old_convenience" + fi + +- # Do each command in the postinstall commands. +- cmds=$old_postinstall_cmds +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done +- IFS="$save_ifs" +- done ++ if test -n "$addlibs"; then ++ gentop="$output_objdir/${outputname}x" ++ generated="$generated $gentop" + +- if test -n "$future_libdirs"; then +- $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 +- fi ++ func_extract_archives $gentop $addlibs ++ oldobjs="$oldobjs $func_extract_archives_result" ++ fi + +- if test -n "$current_libdirs"; then +- # Maybe just do a dry run. +- test -n "$run" && current_libdirs=" -n$current_libdirs" +- exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' +- else +- exit $EXIT_SUCCESS +- fi +- ;; ++ # Do each command in the archive commands. ++ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then ++ cmds=$old_archive_from_new_cmds ++ else + +- # libtool finish mode +- finish) +- modename="$modename: finish" +- libdirs="$nonopt" +- admincmds= ++ # Add any objects from preloaded convenience libraries ++ if test -n "$dlprefiles"; then ++ gentop="$output_objdir/${outputname}x" ++ generated="$generated $gentop" + +- if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then +- for dir +- do +- libdirs="$libdirs $dir" +- done ++ func_extract_archives $gentop $dlprefiles ++ oldobjs="$oldobjs $func_extract_archives_result" ++ fi + +- for libdir in $libdirs; do +- if test -n "$finish_cmds"; then +- # Do each command in the finish commands. +- cmds=$finish_cmds +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $show "$cmd" +- $run eval "$cmd" || admincmds="$admincmds +- $cmd" ++ # POSIX demands no paths to be encoded in archives. We have ++ # to avoid creating archives with duplicate basenames if we ++ # might have to extract them afterwards, e.g., when creating a ++ # static archive out of a convenience library, or when linking ++ # the entirety of a libtool archive into another (currently ++ # not supported by libtool). ++ if (for obj in $oldobjs ++ do ++ func_basename "$obj" ++ $ECHO "$func_basename_result" ++ done | sort | sort -uc >/dev/null 2>&1); then ++ : ++ else ++ $ECHO "copying selected object files to avoid basename conflicts..." ++ gentop="$output_objdir/${outputname}x" ++ generated="$generated $gentop" ++ func_mkdir_p "$gentop" ++ save_oldobjs=$oldobjs ++ oldobjs= ++ counter=1 ++ for obj in $save_oldobjs ++ do ++ func_basename "$obj" ++ objbase="$func_basename_result" ++ case " $oldobjs " in ++ " ") oldobjs=$obj ;; ++ *[\ /]"$objbase "*) ++ while :; do ++ # Make sure we don't pick an alternate name that also ++ # overlaps. ++ newobj=lt$counter-$objbase ++ func_arith $counter + 1 ++ counter=$func_arith_result ++ case " $oldobjs " in ++ *[\ /]"$newobj "*) ;; ++ *) if test ! -f "$gentop/$newobj"; then break; fi ;; ++ esac ++ done ++ func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" ++ oldobjs="$oldobjs $gentop/$newobj" ++ ;; ++ *) oldobjs="$oldobjs $obj" ;; ++ esac + done +- IFS="$save_ifs" +- fi +- if test -n "$finish_eval"; then +- # Do the single finish_eval. +- eval cmds=\"$finish_eval\" +- $run eval "$cmds" || admincmds="$admincmds +- $cmds" + fi +- done +- fi +- +- # Exit here if they wanted silent mode. +- test "$show" = : && exit $EXIT_SUCCESS ++ eval cmds=\"$old_archive_cmds\" + +- $echo "X----------------------------------------------------------------------" | $Xsed +- $echo "Libraries have been installed in:" +- for libdir in $libdirs; do +- $echo " $libdir" ++ func_len " $cmds" ++ len=$func_len_result ++ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then ++ cmds=$old_archive_cmds ++ else ++ # the command line is too long to link in one step, link in parts ++ func_verbose "using piecewise archive linking..." ++ save_RANLIB=$RANLIB ++ RANLIB=: ++ objlist= ++ concat_cmds= ++ save_oldobjs=$oldobjs ++ oldobjs= ++ # Is there a better way of finding the last object in the list? ++ for obj in $save_oldobjs ++ do ++ last_oldobj=$obj ++ done ++ eval test_cmds=\"$old_archive_cmds\" ++ func_len " $test_cmds" ++ len0=$func_len_result ++ len=$len0 ++ for obj in $save_oldobjs ++ do ++ func_len " $obj" ++ func_arith $len + $func_len_result ++ len=$func_arith_result ++ func_append objlist " $obj" ++ if test "$len" -lt "$max_cmd_len"; then ++ : ++ else ++ # the above command should be used before it gets too long ++ oldobjs=$objlist ++ if test "$obj" = "$last_oldobj" ; then ++ RANLIB=$save_RANLIB ++ fi ++ test -z "$concat_cmds" || concat_cmds=$concat_cmds~ ++ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" ++ objlist= ++ len=$len0 ++ fi ++ done ++ RANLIB=$save_RANLIB ++ oldobjs=$objlist ++ if test "X$oldobjs" = "X" ; then ++ eval cmds=\"\$concat_cmds\" ++ else ++ eval cmds=\"\$concat_cmds~\$old_archive_cmds\" ++ fi ++ fi ++ fi ++ func_execute_cmds "$cmds" 'exit $?' + done +- $echo +- $echo "If you ever happen to want to link against installed libraries" +- $echo "in a given directory, LIBDIR, you must either use libtool, and" +- $echo "specify the full pathname of the library, or use the \`-LLIBDIR'" +- $echo "flag during linking and do at least one of the following:" +- if test -n "$shlibpath_var"; then +- $echo " - add LIBDIR to the \`$shlibpath_var' environment variable" +- $echo " during execution" +- fi +- if test -n "$runpath_var"; then +- $echo " - add LIBDIR to the \`$runpath_var' environment variable" +- $echo " during linking" +- fi +- if test -n "$hardcode_libdir_flag_spec"; then +- libdir=LIBDIR +- eval flag=\"$hardcode_libdir_flag_spec\" +- +- $echo " - use the \`$flag' linker flag" +- fi +- if test -n "$admincmds"; then +- $echo " - have your system administrator run these commands:$admincmds" +- fi +- if test -f /etc/ld.so.conf; then +- $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" +- fi +- $echo +- $echo "See any operating system documentation about shared libraries for" +- $echo "more information, such as the ld(1) and ld.so(8) manual pages." +- $echo "X----------------------------------------------------------------------" | $Xsed +- exit $EXIT_SUCCESS +- ;; +- +- # libtool execute mode +- execute) +- modename="$modename: execute" + +- # The first argument is the command name. +- cmd="$nonopt" +- if test -z "$cmd"; then +- $echo "$modename: you must specify a COMMAND" 1>&2 +- $echo "$help" +- exit $EXIT_FAILURE +- fi ++ test -n "$generated" && \ ++ func_show_eval "${RM}r$generated" + +- # Handle -dlopen flags immediately. +- for file in $execute_dlfiles; do +- if test ! -f "$file"; then +- $echo "$modename: \`$file' is not a file" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- fi ++ # Now create the libtool archive. ++ case $output in ++ *.la) ++ old_library= ++ test "$build_old_libs" = yes && old_library="$libname.$libext" ++ func_verbose "creating $output" + +- dir= +- case $file in +- *.la) +- # Check to see that this really is a libtool archive. +- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : ++ # Preserve any variables that may affect compiler behavior ++ for var in $variables_saved_for_relink; do ++ if eval test -z \"\${$var+set}\"; then ++ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" ++ elif eval var_value=\$$var; test -z "$var_value"; then ++ relink_command="$var=; export $var; $relink_command" + else +- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE ++ func_quote_for_eval "$var_value" ++ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi ++ done ++ # Quote the link command for shipping. ++ relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" ++ relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` ++ if test "$hardcode_automatic" = yes ; then ++ relink_command= ++ fi + +- # Read the libtool library. +- dlname= +- library_names= ++ # Only create the output if not a dry run. ++ $opt_dry_run || { ++ for installed in no yes; do ++ if test "$installed" = yes; then ++ if test -z "$install_libdir"; then ++ break ++ fi ++ output="$output_objdir/$outputname"i ++ # Replace all uninstalled libtool libraries with the installed ones ++ newdependency_libs= ++ for deplib in $dependency_libs; do ++ case $deplib in ++ *.la) ++ func_basename "$deplib" ++ name="$func_basename_result" ++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` ++ test -z "$libdir" && \ ++ func_fatal_error "\`$deplib' is not a valid libtool archive" ++ newdependency_libs="$newdependency_libs $libdir/$name" ++ ;; ++ *) newdependency_libs="$newdependency_libs $deplib" ;; ++ esac ++ done ++ dependency_libs="$newdependency_libs" ++ newdlfiles= ++ ++ for lib in $dlfiles; do ++ case $lib in ++ *.la) ++ func_basename "$lib" ++ name="$func_basename_result" ++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` ++ test -z "$libdir" && \ ++ func_fatal_error "\`$lib' is not a valid libtool archive" ++ newdlfiles="$newdlfiles $libdir/$name" ++ ;; ++ *) newdlfiles="$newdlfiles $lib" ;; ++ esac ++ done ++ dlfiles="$newdlfiles" ++ newdlprefiles= ++ for lib in $dlprefiles; do ++ case $lib in ++ *.la) ++ # Only pass preopened files to the pseudo-archive (for ++ # eventual linking with the app. that links it) if we ++ # didn't already link the preopened objects directly into ++ # the library: ++ func_basename "$lib" ++ name="$func_basename_result" ++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` ++ test -z "$libdir" && \ ++ func_fatal_error "\`$lib' is not a valid libtool archive" ++ newdlprefiles="$newdlprefiles $libdir/$name" ++ ;; ++ esac ++ done ++ dlprefiles="$newdlprefiles" ++ else ++ newdlfiles= ++ for lib in $dlfiles; do ++ case $lib in ++ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; ++ *) abs=`pwd`"/$lib" ;; ++ esac ++ newdlfiles="$newdlfiles $abs" ++ done ++ dlfiles="$newdlfiles" ++ newdlprefiles= ++ for lib in $dlprefiles; do ++ case $lib in ++ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; ++ *) abs=`pwd`"/$lib" ;; ++ esac ++ newdlprefiles="$newdlprefiles $abs" ++ done ++ dlprefiles="$newdlprefiles" ++ fi ++ $RM $output ++ # place dlname in correct position for cygwin ++ tdlname=$dlname ++ case $host,$output,$installed,$module,$dlname in ++ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; ++ esac ++ $ECHO > $output "\ ++# $outputname - a libtool library file ++# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION ++# ++# Please DO NOT delete this file! ++# It is necessary for linking the library. + +- # If there is no directory component, then add one. +- case $file in +- */* | *\\*) . $file ;; +- *) . ./$file ;; +- esac ++# The name that we can dlopen(3). ++dlname='$tdlname' + +- # Skip this library if it cannot be dlopened. +- if test -z "$dlname"; then +- # Warn if it was a shared library. +- test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" +- continue +- fi ++# Names of this library. ++library_names='$library_names' + +- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` +- test "X$dir" = "X$file" && dir=. ++# The name of the static archive. ++old_library='$old_library' + +- if test -f "$dir/$objdir/$dlname"; then +- dir="$dir/$objdir" +- else +- if test ! -f "$dir/$dlname"; then +- $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 +- exit $EXIT_FAILURE +- fi +- fi +- ;; ++# Linker flags that can not go in dependency_libs. ++inherited_linker_flags='$new_inherited_linker_flags' + +- *.lo) +- # Just add the directory containing the .lo file. +- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` +- test "X$dir" = "X$file" && dir=. +- ;; ++# Libraries that this one depends upon. ++dependency_libs='$dependency_libs' + +- *) +- $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 +- continue +- ;; +- esac ++# Names of additional weak libraries provided by this library ++weak_library_names='$weak_libs' + +- # Get the absolute pathname. +- absdir=`cd "$dir" && pwd` +- test -n "$absdir" && dir="$absdir" ++# Version information for $libname. ++current=$current ++age=$age ++revision=$revision + +- # Now add the directory to shlibpath_var. +- if eval "test -z \"\$$shlibpath_var\""; then +- eval "$shlibpath_var=\"\$dir\"" +- else +- eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" +- fi +- done ++# Is this an already installed library? ++installed=$installed + +- # This variable tells wrapper scripts just to set shlibpath_var +- # rather than running their programs. +- libtool_execute_magic="$magic" ++# Should we warn about portability when linking against -modules? ++shouldnotlink=$module + +- # Check if any of the arguments is a wrapper script. +- args= +- for file +- do +- case $file in +- -*) ;; +- *) +- # Do a test to see if this is really a libtool program. +- if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then +- # If there is no directory component, then add one. +- case $file in +- */* | *\\*) . $file ;; +- *) . ./$file ;; +- esac ++# Files to dlopen/dlpreopen ++dlopen='$dlfiles' ++dlpreopen='$dlprefiles' + +- # Transform arg to wrapped name. +- file="$progdir/$program" +- fi +- ;; +- esac +- # Quote arguments (to preserve shell metacharacters). +- file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` +- args="$args \"$file\"" +- done ++# Directory that this library needs to be installed in: ++libdir='$install_libdir'" ++ if test "$installed" = no && test "$need_relink" = yes; then ++ $ECHO >> $output "\ ++relink_command=\"$relink_command\"" ++ fi ++ done ++ } + +- if test -z "$run"; then +- if test -n "$shlibpath_var"; then +- # Export the shlibpath_var. +- eval "export $shlibpath_var" +- fi ++ # Do a symbolic link so that the libtool archive can be found in ++ # LD_LIBRARY_PATH before the program is installed. ++ func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' ++ ;; ++ esac ++ exit $EXIT_SUCCESS ++} + +- # Restore saved environment variables +- for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES +- do +- eval "if test \"\${save_$lt_var+set}\" = set; then +- $lt_var=\$save_$lt_var; export $lt_var +- fi" +- done ++{ test "$mode" = link || test "$mode" = relink; } && ++ func_mode_link ${1+"$@"} + +- # Now prepare to actually exec the command. +- exec_cmd="\$cmd$args" +- else +- # Display what would be done. +- if test -n "$shlibpath_var"; then +- eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" +- $echo "export $shlibpath_var" +- fi +- $echo "$cmd$args" +- exit $EXIT_SUCCESS +- fi +- ;; + +- # libtool clean and uninstall mode +- clean | uninstall) +- modename="$modename: $mode" +- rm="$nonopt" ++# func_mode_uninstall arg... ++func_mode_uninstall () ++{ ++ $opt_debug ++ RM="$nonopt" + files= + rmforce= + exit_status=0 +@@ -6513,30 +7676,28 @@ + for arg + do + case $arg in +- -f) rm="$rm $arg"; rmforce=yes ;; +- -*) rm="$rm $arg" ;; ++ -f) RM="$RM $arg"; rmforce=yes ;; ++ -*) RM="$RM $arg" ;; + *) files="$files $arg" ;; + esac + done + +- if test -z "$rm"; then +- $echo "$modename: you must specify an RM program" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- fi ++ test -z "$RM" && \ ++ func_fatal_help "you must specify an RM program" + + rmdirs= + + origobjdir="$objdir" + for file in $files; do +- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$dir" = "X$file"; then +- dir=. ++ func_dirname "$file" "" "." ++ dir="$func_dirname_result" ++ if test "X$dir" = X.; then + objdir="$origobjdir" + else + objdir="$dir/$origobjdir" + fi +- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` ++ func_basename "$file" ++ name="$func_basename_result" + test "$mode" = uninstall && objdir="$dir" + + # Remember objdir for removal later, being careful to avoid duplicates +@@ -6548,9 +7709,9 @@ + fi + + # Don't error if the file doesn't exist and rm -f was used. +- if (test -L "$file") >/dev/null 2>&1 \ +- || (test -h "$file") >/dev/null 2>&1 \ +- || test -f "$file"; then ++ if { test -L "$file"; } >/dev/null 2>&1 || ++ { test -h "$file"; } >/dev/null 2>&1 || ++ test -f "$file"; then + : + elif test -d "$file"; then + exit_status=1 +@@ -6564,8 +7725,8 @@ + case $name in + *.la) + # Possibly a libtool archive, so verify it. +- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then +- . $dir/$name ++ if func_lalib_p "$file"; then ++ func_source $dir/$name + + # Delete the libtool libraries and symlinks. + for n in $library_names; do +@@ -6580,39 +7741,17 @@ + *" $dlname "*) ;; + *) rmfiles="$rmfiles $objdir/$dlname" ;; + esac +- test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" ++ test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" + ;; + uninstall) + if test -n "$library_names"; then + # Do each command in the postuninstall commands. +- cmds=$postuninstall_cmds +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $show "$cmd" +- $run eval "$cmd" +- if test "$?" -ne 0 && test "$rmforce" != yes; then +- exit_status=1 +- fi +- done +- IFS="$save_ifs" ++ func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + fi + + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. +- cmds=$old_postuninstall_cmds +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $show "$cmd" +- $run eval "$cmd" +- if test "$?" -ne 0 && test "$rmforce" != yes; then +- exit_status=1 +- fi +- done +- IFS="$save_ifs" ++ func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + fi + # FIXME: should reinstall the best remaining shared library. + ;; +@@ -6622,20 +7761,20 @@ + + *.lo) + # Possibly a libtool object, so verify it. +- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then ++ if func_lalib_p "$file"; then + + # Read the .lo file +- . $dir/$name ++ func_source $dir/$name + + # Add PIC object to the list of files to remove. +- if test -n "$pic_object" \ +- && test "$pic_object" != none; then ++ if test -n "$pic_object" && ++ test "$pic_object" != none; then + rmfiles="$rmfiles $dir/$pic_object" + fi + + # Add non-PIC object to the list of files to remove. +- if test -n "$non_pic_object" \ +- && test "$non_pic_object" != none; then ++ if test -n "$non_pic_object" && ++ test "$non_pic_object" != none; then + rmfiles="$rmfiles $dir/$non_pic_object" + fi + fi +@@ -6646,17 +7785,26 @@ + noexename=$name + case $file in + *.exe) +- file=`$echo $file|${SED} 's,.exe$,,'` +- noexename=`$echo $name|${SED} 's,.exe$,,'` ++ func_stripname '' '.exe' "$file" ++ file=$func_stripname_result ++ func_stripname '' '.exe' "$name" ++ noexename=$func_stripname_result + # $file with .exe has already been added to rmfiles, + # add $file without .exe + rmfiles="$rmfiles $file" + ;; + esac + # Do a test to see if this is a libtool program. +- if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then +- relink_command= +- . $dir/$noexename ++ if func_ltwrapper_p "$file"; then ++ if func_ltwrapper_executable_p "$file"; then ++ func_ltwrapper_scriptname "$file" ++ relink_command= ++ func_source $func_ltwrapper_scriptname_result ++ rmfiles="$rmfiles $func_ltwrapper_scriptname_result" ++ else ++ relink_command= ++ func_source $dir/$noexename ++ fi + + # note $name still contains .exe if it was in $file originally + # as does the version of $file that was added into $rmfiles +@@ -6671,239 +7819,38 @@ + fi + ;; + esac +- $show "$rm $rmfiles" +- $run $rm $rmfiles || exit_status=1 ++ func_show_eval "$RM $rmfiles" 'exit_status=1' + done + objdir="$origobjdir" + + # Try to remove the ${objdir}s in the directories where we deleted files + for dir in $rmdirs; do + if test -d "$dir"; then +- $show "rmdir $dir" +- $run rmdir $dir >/dev/null 2>&1 ++ func_show_eval "rmdir $dir >/dev/null 2>&1" + fi + done + + exit $exit_status +- ;; ++} + +- "") +- $echo "$modename: you must specify a MODE" 1>&2 +- $echo "$generic_help" 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac ++{ test "$mode" = uninstall || test "$mode" = clean; } && ++ func_mode_uninstall ${1+"$@"} + +- if test -z "$exec_cmd"; then +- $echo "$modename: invalid operation mode \`$mode'" 1>&2 +- $echo "$generic_help" 1>&2 +- exit $EXIT_FAILURE +- fi +-fi # test -z "$show_help" ++test -z "$mode" && { ++ help="$generic_help" ++ func_fatal_help "you must specify a MODE" ++} ++ ++test -z "$exec_cmd" && \ ++ func_fatal_help "invalid operation mode \`$mode'" + + if test -n "$exec_cmd"; then +- eval exec $exec_cmd ++ eval exec "$exec_cmd" + exit $EXIT_FAILURE + fi + +-# We need to display help for each of the modes. +-case $mode in +-"") $echo \ +-"Usage: $modename [OPTION]... [MODE-ARG]... +- +-Provide generalized library-building support services. +- +- --config show all configuration variables +- --debug enable verbose shell tracing +--n, --dry-run display commands without modifying any files +- --features display basic configuration information and exit +- --finish same as \`--mode=finish' +- --help display this help message and exit +- --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] +- --quiet same as \`--silent' +- --silent don't print informational messages +- --tag=TAG use configuration variables from tag TAG +- --version print version information +- +-MODE must be one of the following: +- +- clean remove files from the build directory +- compile compile a source file into a libtool object +- execute automatically set library path, then run a program +- finish complete the installation of libtool libraries +- install install libraries or executables +- link create a library or an executable +- uninstall remove libraries from an installed directory +- +-MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for +-a more detailed description of MODE. +- +-Report bugs to ." +- exit $EXIT_SUCCESS +- ;; +- +-clean) +- $echo \ +-"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... +- +-Remove files from the build directory. +- +-RM is the name of the program to use to delete files associated with each FILE +-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +-to RM. +- +-If FILE is a libtool library, object or program, all the files associated +-with it are deleted. Otherwise, only FILE itself is deleted using RM." +- ;; +- +-compile) +- $echo \ +-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE +- +-Compile a source file into a libtool library object. +- +-This mode accepts the following additional options: +- +- -o OUTPUT-FILE set the output file name to OUTPUT-FILE +- -prefer-pic try to building PIC objects only +- -prefer-non-pic try to building non-PIC objects only +- -static always build a \`.o' file suitable for static linking +- +-COMPILE-COMMAND is a command to be used in creating a \`standard' object file +-from the given SOURCEFILE. +- +-The output file name is determined by removing the directory component from +-SOURCEFILE, then substituting the C source code suffix \`.c' with the +-library object suffix, \`.lo'." +- ;; +- +-execute) +- $echo \ +-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... +- +-Automatically set library path, then run a program. +- +-This mode accepts the following additional options: +- +- -dlopen FILE add the directory containing FILE to the library path +- +-This mode sets the library path environment variable according to \`-dlopen' +-flags. +- +-If any of the ARGS are libtool executable wrappers, then they are translated +-into their corresponding uninstalled binary, and any of their required library +-directories are added to the library path. +- +-Then, COMMAND is executed, with ARGS as arguments." +- ;; +- +-finish) +- $echo \ +-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]... +- +-Complete the installation of libtool libraries. +- +-Each LIBDIR is a directory that contains libtool libraries. +- +-The commands that this mode executes may require superuser privileges. Use +-the \`--dry-run' option if you just want to see what would be executed." +- ;; +- +-install) +- $echo \ +-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... +- +-Install executables or libraries. +- +-INSTALL-COMMAND is the installation command. The first component should be +-either the \`install' or \`cp' program. +- +-The rest of the components are interpreted as arguments to that command (only +-BSD-compatible install options are recognized)." +- ;; +- +-link) +- $echo \ +-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND... +- +-Link object files or libraries together to form another library, or to +-create an executable program. ++exit $exit_status + +-LINK-COMMAND is a command using the C compiler that you would use to create +-a program from several object files. +- +-The following components of LINK-COMMAND are treated specially: +- +- -all-static do not do any dynamic linking at all +- -avoid-version do not add a version suffix if possible +- -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime +- -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols +- -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) +- -export-symbols SYMFILE +- try to export only the symbols listed in SYMFILE +- -export-symbols-regex REGEX +- try to export only the symbols matching REGEX +- -LLIBDIR search LIBDIR for required installed libraries +- -lNAME OUTPUT-FILE requires the installed library libNAME +- -module build a library that can dlopened +- -no-fast-install disable the fast-install mode +- -no-install link a not-installable executable +- -no-undefined declare that a library does not refer to external symbols +- -o OUTPUT-FILE create OUTPUT-FILE from the specified objects +- -objectlist FILE Use a list of object files found in FILE to specify objects +- -precious-files-regex REGEX +- don't remove output files matching REGEX +- -release RELEASE specify package release information +- -rpath LIBDIR the created library will eventually be installed in LIBDIR +- -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries +- -static do not do any dynamic linking of uninstalled libtool libraries +- -static-libtool-libs +- do not do any dynamic linking of libtool libraries +- -version-info CURRENT[:REVISION[:AGE]] +- specify library version info [each variable defaults to 0] +- +-All other options (arguments beginning with \`-') are ignored. +- +-Every other argument is treated as a filename. Files ending in \`.la' are +-treated as uninstalled libtool libraries, other files are standard or library +-object files. +- +-If the OUTPUT-FILE ends in \`.la', then a libtool library is created, +-only library objects (\`.lo' files) may be specified, and \`-rpath' is +-required, except when creating a convenience library. +- +-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created +-using \`ar' and \`ranlib', or on Windows using \`lib'. +- +-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +-is created, otherwise an executable program is created." +- ;; +- +-uninstall) +- $echo \ +-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... +- +-Remove libraries from an installation directory. +- +-RM is the name of the program to use to delete files associated with each FILE +-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +-to RM. +- +-If FILE is a libtool library, all the files associated with it are deleted. +-Otherwise, only FILE itself is deleted using RM." +- ;; +- +-*) +- $echo "$modename: invalid operation mode \`$mode'" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- ;; +-esac +- +-$echo +-$echo "Try \`$modename --help' for more information about other modes." +- +-exit $? + + # The TAGs below are defined such that we never get into a situation + # in which we disable both kinds of libraries. Given conflicting +@@ -6917,14 +7864,17 @@ + # configuration. But we'll never go from static-only to shared-only. + + # ### BEGIN LIBTOOL TAG CONFIG: disable-shared +-disable_libs=shared ++build_libtool_libs=no ++build_old_libs=yes + # ### END LIBTOOL TAG CONFIG: disable-shared + + # ### BEGIN LIBTOOL TAG CONFIG: disable-static +-disable_libs=static ++build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` + # ### END LIBTOOL TAG CONFIG: disable-static + + # Local Variables: + # mode:shell-script + # sh-indentation:2 + # End: ++# vi:sw=2 ++ +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/m4/libtool.m4 gnome-power-manager-2.24.0.new/m4/libtool.m4 +--- gnome-power-manager-2.24.0/m4/libtool.m4 1970-01-01 01:00:00.000000000 +0100 ++++ gnome-power-manager-2.24.0.new/m4/libtool.m4 2008-11-20 18:37:14.000000000 +0100 +@@ -0,0 +1,7325 @@ ++# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- ++# ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, ++# 2006, 2007, 2008 Free Software Foundation, Inc. ++# Written by Gordon Matzigkeit, 1996 ++# ++# This file is free software; the Free Software Foundation gives ++# unlimited permission to copy and/or distribute it, with or without ++# modifications, as long as this notice is preserved. ++ ++m4_define([_LT_COPYING], [dnl ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, ++# 2006, 2007, 2008 Free Software Foundation, Inc. ++# Written by Gordon Matzigkeit, 1996 ++# ++# This file is part of GNU Libtool. ++# ++# GNU Libtool is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# As a special exception to the GNU General Public License, ++# if you distribute this file as part of a program or library that ++# is built using GNU Libtool, you may include this file under the ++# same distribution terms that you use for the rest of that program. ++# ++# GNU Libtool is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with GNU Libtool; see the file COPYING. If not, a copy ++# can be downloaded from http://www.gnu.org/licenses/gpl.html, or ++# obtained by writing to the Free Software Foundation, Inc., ++# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++]) ++ ++# serial 56 LT_INIT ++ ++ ++# LT_PREREQ(VERSION) ++# ------------------ ++# Complain and exit if this libtool version is less that VERSION. ++m4_defun([LT_PREREQ], ++[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, ++ [m4_default([$3], ++ [m4_fatal([Libtool version $1 or higher is required], ++ 63)])], ++ [$2])]) ++ ++ ++# _LT_CHECK_BUILDDIR ++# ------------------ ++# Complain if the absolute build directory name contains unusual characters ++m4_defun([_LT_CHECK_BUILDDIR], ++[case `pwd` in ++ *\ * | *\ *) ++ AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; ++esac ++]) ++ ++ ++# LT_INIT([OPTIONS]) ++# ------------------ ++AC_DEFUN([LT_INIT], ++[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT ++AC_BEFORE([$0], [LT_LANG])dnl ++AC_BEFORE([$0], [LT_OUTPUT])dnl ++AC_BEFORE([$0], [LTDL_INIT])dnl ++m4_require([_LT_CHECK_BUILDDIR])dnl ++ ++dnl Autoconf doesn't catch unexpanded LT_ macros by default: ++m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl ++m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl ++dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 ++dnl unless we require an AC_DEFUNed macro: ++AC_REQUIRE([LTOPTIONS_VERSION])dnl ++AC_REQUIRE([LTSUGAR_VERSION])dnl ++AC_REQUIRE([LTVERSION_VERSION])dnl ++AC_REQUIRE([LTOBSOLETE_VERSION])dnl ++m4_require([_LT_PROG_LTMAIN])dnl ++ ++dnl Parse OPTIONS ++_LT_SET_OPTIONS([$0], [$1]) ++ ++# This can be used to rebuild libtool when needed ++LIBTOOL_DEPS="$ltmain" ++ ++# Always use our own libtool. ++LIBTOOL='$(SHELL) $(top_builddir)/libtool' ++AC_SUBST(LIBTOOL)dnl ++ ++_LT_SETUP ++ ++# Only expand once: ++m4_define([LT_INIT]) ++])# LT_INIT ++ ++# Old names: ++AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) ++AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_PROG_LIBTOOL], []) ++dnl AC_DEFUN([AM_PROG_LIBTOOL], []) ++ ++ ++# _LT_CC_BASENAME(CC) ++# ------------------- ++# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. ++m4_defun([_LT_CC_BASENAME], ++[for cc_temp in $1""; do ++ case $cc_temp in ++ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; ++ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++]) ++ ++ ++# _LT_FILEUTILS_DEFAULTS ++# ---------------------- ++# It is okay to use these file commands and assume they have been set ++# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. ++m4_defun([_LT_FILEUTILS_DEFAULTS], ++[: ${CP="cp -f"} ++: ${MV="mv -f"} ++: ${RM="rm -f"} ++])# _LT_FILEUTILS_DEFAULTS ++ ++ ++# _LT_SETUP ++# --------- ++m4_defun([_LT_SETUP], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl ++AC_REQUIRE([AC_CANONICAL_BUILD])dnl ++_LT_DECL([], [host_alias], [0], [The host system])dnl ++_LT_DECL([], [host], [0])dnl ++_LT_DECL([], [host_os], [0])dnl ++dnl ++_LT_DECL([], [build_alias], [0], [The build system])dnl ++_LT_DECL([], [build], [0])dnl ++_LT_DECL([], [build_os], [0])dnl ++dnl ++AC_REQUIRE([AC_PROG_CC])dnl ++AC_REQUIRE([LT_PATH_LD])dnl ++AC_REQUIRE([LT_PATH_NM])dnl ++dnl ++AC_REQUIRE([AC_PROG_LN_S])dnl ++test -z "$LN_S" && LN_S="ln -s" ++_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl ++dnl ++AC_REQUIRE([LT_CMD_MAX_LEN])dnl ++_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl ++_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl ++dnl ++m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_CHECK_SHELL_FEATURES])dnl ++m4_require([_LT_CMD_RELOAD])dnl ++m4_require([_LT_CHECK_MAGIC_METHOD])dnl ++m4_require([_LT_CMD_OLD_ARCHIVE])dnl ++m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl ++ ++_LT_CONFIG_LIBTOOL_INIT([ ++# See if we are running on zsh, and set the options which allow our ++# commands through without removal of \ escapes INIT. ++if test -n "\${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++fi ++]) ++if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++fi ++ ++_LT_CHECK_OBJDIR ++ ++m4_require([_LT_TAG_COMPILER])dnl ++_LT_PROG_ECHO_BACKSLASH ++ ++case $host_os in ++aix3*) ++ # AIX sometimes has problems with the GCC collect2 program. For some ++ # reason, if we set the COLLECT_NAMES environment variable, the problems ++ # vanish in a puff of smoke. ++ if test "X${COLLECT_NAMES+set}" != Xset; then ++ COLLECT_NAMES= ++ export COLLECT_NAMES ++ fi ++ ;; ++esac ++ ++# Sed substitution that helps us do robust quoting. It backslashifies ++# metacharacters that are still active within double-quoted strings. ++sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' ++ ++# Same as above, but do not quote variable references. ++double_quote_subst='s/\([["`\\]]\)/\\\1/g' ++ ++# Sed substitution to delay expansion of an escaped shell variable in a ++# double_quote_subst'ed string. ++delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' ++ ++# Sed substitution to delay expansion of an escaped single quote. ++delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' ++ ++# Sed substitution to avoid accidental globbing in evaled expressions ++no_glob_subst='s/\*/\\\*/g' ++ ++# Global variables: ++ofile=libtool ++can_build_shared=yes ++ ++# All known linkers require a `.a' archive for static linking (except MSVC, ++# which needs '.lib'). ++libext=a ++ ++with_gnu_ld="$lt_cv_prog_gnu_ld" ++ ++old_CC="$CC" ++old_CFLAGS="$CFLAGS" ++ ++# Set sane defaults for various variables ++test -z "$CC" && CC=cc ++test -z "$LTCC" && LTCC=$CC ++test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS ++test -z "$LD" && LD=ld ++test -z "$ac_objext" && ac_objext=o ++ ++_LT_CC_BASENAME([$compiler]) ++ ++# Only perform the check for file, if the check method requires it ++test -z "$MAGIC_CMD" && MAGIC_CMD=file ++case $deplibs_check_method in ++file_magic*) ++ if test "$file_magic_cmd" = '$MAGIC_CMD'; then ++ _LT_PATH_MAGIC ++ fi ++ ;; ++esac ++ ++# Use C for the default configuration in the libtool script ++LT_SUPPORTED_TAG([CC]) ++_LT_LANG_C_CONFIG ++_LT_LANG_DEFAULT_CONFIG ++_LT_CONFIG_COMMANDS ++])# _LT_SETUP ++ ++ ++# _LT_PROG_LTMAIN ++# --------------- ++# Note that this code is called both from `configure', and `config.status' ++# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, ++# `config.status' has no value for ac_aux_dir unless we are using Automake, ++# so we pass a copy along to make sure it has a sensible value anyway. ++m4_defun([_LT_PROG_LTMAIN], ++[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl ++_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) ++ltmain="$ac_aux_dir/ltmain.sh" ++])# _LT_PROG_LTMAIN ++ ++ ++## ------------------------------------- ## ++## Accumulate code for creating libtool. ## ++## ------------------------------------- ## ++ ++# So that we can recreate a full libtool script including additional ++# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS ++# in macros and then make a single call at the end using the `libtool' ++# label. ++ ++ ++# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) ++# ---------------------------------------- ++# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. ++m4_define([_LT_CONFIG_LIBTOOL_INIT], ++[m4_ifval([$1], ++ [m4_append([_LT_OUTPUT_LIBTOOL_INIT], ++ [$1 ++])])]) ++ ++# Initialize. ++m4_define([_LT_OUTPUT_LIBTOOL_INIT]) ++ ++ ++# _LT_CONFIG_LIBTOOL([COMMANDS]) ++# ------------------------------ ++# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. ++m4_define([_LT_CONFIG_LIBTOOL], ++[m4_ifval([$1], ++ [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], ++ [$1 ++])])]) ++ ++# Initialize. ++m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) ++ ++ ++# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) ++# ----------------------------------------------------- ++m4_defun([_LT_CONFIG_SAVE_COMMANDS], ++[_LT_CONFIG_LIBTOOL([$1]) ++_LT_CONFIG_LIBTOOL_INIT([$2]) ++]) ++ ++ ++# _LT_FORMAT_COMMENT([COMMENT]) ++# ----------------------------- ++# Add leading comment marks to the start of each line, and a trailing ++# full-stop to the whole comment if one is not present already. ++m4_define([_LT_FORMAT_COMMENT], ++[m4_ifval([$1], [ ++m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], ++ [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) ++)]) ++ ++ ++ ++## ------------------------ ## ++## FIXME: Eliminate VARNAME ## ++## ------------------------ ## ++ ++ ++# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) ++# ------------------------------------------------------------------- ++# CONFIGNAME is the name given to the value in the libtool script. ++# VARNAME is the (base) name used in the configure script. ++# VALUE may be 0, 1 or 2 for a computed quote escaped value based on ++# VARNAME. Any other value will be used directly. ++m4_define([_LT_DECL], ++[lt_if_append_uniq([lt_decl_varnames], [$2], [, ], ++ [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], ++ [m4_ifval([$1], [$1], [$2])]) ++ lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) ++ m4_ifval([$4], ++ [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) ++ lt_dict_add_subkey([lt_decl_dict], [$2], ++ [tagged?], [m4_ifval([$5], [yes], [no])])]) ++]) ++ ++ ++# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) ++# -------------------------------------------------------- ++m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) ++ ++ ++# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) ++# ------------------------------------------------ ++m4_define([lt_decl_tag_varnames], ++[_lt_decl_filter([tagged?], [yes], $@)]) ++ ++ ++# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) ++# --------------------------------------------------------- ++m4_define([_lt_decl_filter], ++[m4_case([$#], ++ [0], [m4_fatal([$0: too few arguments: $#])], ++ [1], [m4_fatal([$0: too few arguments: $#: $1])], ++ [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], ++ [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], ++ [lt_dict_filter([lt_decl_dict], $@)])[]dnl ++]) ++ ++ ++# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) ++# -------------------------------------------------- ++m4_define([lt_decl_quote_varnames], ++[_lt_decl_filter([value], [1], $@)]) ++ ++ ++# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) ++# --------------------------------------------------- ++m4_define([lt_decl_dquote_varnames], ++[_lt_decl_filter([value], [2], $@)]) ++ ++ ++# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) ++# --------------------------------------------------- ++m4_define([lt_decl_varnames_tagged], ++[_$0(m4_quote(m4_default([$1], [[, ]])), ++ m4_quote(m4_if([$2], [], ++ m4_quote(lt_decl_tag_varnames), ++ m4_quote(m4_shift($@)))), ++ m4_split(m4_normalize(m4_quote(_LT_TAGS))))]) ++m4_define([_lt_decl_varnames_tagged], [lt_combine([$1], [$2], [_], $3)]) ++ ++ ++# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) ++# ------------------------------------------------ ++m4_define([lt_decl_all_varnames], ++[_$0(m4_quote(m4_default([$1], [[, ]])), ++ m4_if([$2], [], ++ m4_quote(lt_decl_varnames), ++ m4_quote(m4_shift($@))))[]dnl ++]) ++m4_define([_lt_decl_all_varnames], ++[lt_join($@, lt_decl_varnames_tagged([$1], ++ lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl ++]) ++ ++ ++# _LT_CONFIG_STATUS_DECLARE([VARNAME]) ++# ------------------------------------ ++# Quote a variable value, and forward it to `config.status' so that its ++# declaration there will have the same value as in `configure'. VARNAME ++# must have a single quote delimited value for this to work. ++m4_define([_LT_CONFIG_STATUS_DECLARE], ++[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`']) ++ ++ ++# _LT_CONFIG_STATUS_DECLARATIONS ++# ------------------------------ ++# We delimit libtool config variables with single quotes, so when ++# we write them to config.status, we have to be sure to quote all ++# embedded single quotes properly. In configure, this macro expands ++# each variable declared with _LT_DECL (and _LT_TAGDECL) into: ++# ++# ='`$ECHO "X$" | $Xsed -e "$delay_single_quote_subst"`' ++m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], ++[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), ++ [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) ++ ++ ++# _LT_LIBTOOL_TAGS ++# ---------------- ++# Output comment and list of tags supported by the script ++m4_defun([_LT_LIBTOOL_TAGS], ++[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl ++available_tags="_LT_TAGS"dnl ++]) ++ ++ ++# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) ++# ----------------------------------- ++# Extract the dictionary values for VARNAME (optionally with TAG) and ++# expand to a commented shell variable setting: ++# ++# # Some comment about what VAR is for. ++# visible_name=$lt_internal_name ++m4_define([_LT_LIBTOOL_DECLARE], ++[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], ++ [description])))[]dnl ++m4_pushdef([_libtool_name], ++ m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl ++m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), ++ [0], [_libtool_name=[$]$1], ++ [1], [_libtool_name=$lt_[]$1], ++ [2], [_libtool_name=$lt_[]$1], ++ [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl ++m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl ++]) ++ ++ ++# _LT_LIBTOOL_CONFIG_VARS ++# ----------------------- ++# Produce commented declarations of non-tagged libtool config variables ++# suitable for insertion in the LIBTOOL CONFIG section of the `libtool' ++# script. Tagged libtool config variables (even for the LIBTOOL CONFIG ++# section) are produced by _LT_LIBTOOL_TAG_VARS. ++m4_defun([_LT_LIBTOOL_CONFIG_VARS], ++[m4_foreach([_lt_var], ++ m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), ++ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) ++ ++ ++# _LT_LIBTOOL_TAG_VARS(TAG) ++# ------------------------- ++m4_define([_LT_LIBTOOL_TAG_VARS], ++[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), ++ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) ++ ++ ++# _LT_TAGVAR(VARNAME, [TAGNAME]) ++# ------------------------------ ++m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) ++ ++ ++# _LT_CONFIG_COMMANDS ++# ------------------- ++# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of ++# variables for single and double quote escaping we saved from calls ++# to _LT_DECL, we can put quote escaped variables declarations ++# into `config.status', and then the shell code to quote escape them in ++# for loops in `config.status'. Finally, any additional code accumulated ++# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. ++m4_defun([_LT_CONFIG_COMMANDS], ++[AC_PROVIDE_IFELSE([LT_OUTPUT], ++ dnl If the libtool generation code has been placed in $CONFIG_LT, ++ dnl instead of duplicating it all over again into config.status, ++ dnl then we will have config.status run $CONFIG_LT later, so it ++ dnl needs to know what name is stored there: ++ [AC_CONFIG_COMMANDS([libtool], ++ [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], ++ dnl If the libtool generation code is destined for config.status, ++ dnl expand the accumulated commands and init code now: ++ [AC_CONFIG_COMMANDS([libtool], ++ [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) ++])#_LT_CONFIG_COMMANDS ++ ++ ++# Initialize. ++m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], ++[ ++ ++# The HP-UX ksh and POSIX shell print the target directory to stdout ++# if CDPATH is set. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++ ++sed_quote_subst='$sed_quote_subst' ++double_quote_subst='$double_quote_subst' ++delay_variable_subst='$delay_variable_subst' ++_LT_CONFIG_STATUS_DECLARATIONS ++LTCC='$LTCC' ++LTCFLAGS='$LTCFLAGS' ++compiler='$compiler_DEFAULT' ++ ++# Quote evaled strings. ++for var in lt_decl_all_varnames([[ \ ++]], lt_decl_quote_varnames); do ++ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in ++ *[[\\\\\\\`\\"\\\$]]*) ++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ++ ;; ++ *) ++ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ++ ;; ++ esac ++done ++ ++# Double-quote double-evaled strings. ++for var in lt_decl_all_varnames([[ \ ++]], lt_decl_dquote_varnames); do ++ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in ++ *[[\\\\\\\`\\"\\\$]]*) ++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ++ ;; ++ *) ++ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ++ ;; ++ esac ++done ++ ++# Fix-up fallback echo if it was mangled by the above quoting rules. ++case \$lt_ECHO in ++*'\\\[$]0 --fallback-echo"')dnl " ++ lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\` ++ ;; ++esac ++ ++_LT_OUTPUT_LIBTOOL_INIT ++]) ++ ++ ++# LT_OUTPUT ++# --------- ++# This macro allows early generation of the libtool script (before ++# AC_OUTPUT is called), incase it is used in configure for compilation ++# tests. ++AC_DEFUN([LT_OUTPUT], ++[: ${CONFIG_LT=./config.lt} ++AC_MSG_NOTICE([creating $CONFIG_LT]) ++cat >"$CONFIG_LT" <<_LTEOF ++#! $SHELL ++# Generated by $as_me. ++# Run this file to recreate a libtool stub with the current configuration. ++ ++lt_cl_silent=false ++SHELL=\${CONFIG_SHELL-$SHELL} ++_LTEOF ++ ++cat >>"$CONFIG_LT" <<\_LTEOF ++AS_SHELL_SANITIZE ++_AS_PREPARE ++ ++exec AS_MESSAGE_FD>&1 ++exec AS_MESSAGE_LOG_FD>>config.log ++{ ++ echo ++ AS_BOX([Running $as_me.]) ++} >&AS_MESSAGE_LOG_FD ++ ++lt_cl_help="\ ++\`$as_me' creates a local libtool stub from the current configuration, ++for use in further configure time tests before the real libtool is ++generated. ++ ++Usage: $[0] [[OPTIONS]] ++ ++ -h, --help print this help, then exit ++ -V, --version print version number, then exit ++ -q, --quiet do not print progress messages ++ -d, --debug don't remove temporary files ++ ++Report bugs to ." ++ ++lt_cl_version="\ ++m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl ++m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) ++configured by $[0], generated by m4_PACKAGE_STRING. ++ ++Copyright (C) 2008 Free Software Foundation, Inc. ++This config.lt script is free software; the Free Software Foundation ++gives unlimited permision to copy, distribute and modify it." ++ ++while test $[#] != 0 ++do ++ case $[1] in ++ --version | --v* | -V ) ++ echo "$lt_cl_version"; exit 0 ;; ++ --help | --h* | -h ) ++ echo "$lt_cl_help"; exit 0 ;; ++ --debug | --d* | -d ) ++ debug=: ;; ++ --quiet | --q* | --silent | --s* | -q ) ++ lt_cl_silent=: ;; ++ ++ -*) AC_MSG_ERROR([unrecognized option: $[1] ++Try \`$[0] --help' for more information.]) ;; ++ ++ *) AC_MSG_ERROR([unrecognized argument: $[1] ++Try \`$[0] --help' for more information.]) ;; ++ esac ++ shift ++done ++ ++if $lt_cl_silent; then ++ exec AS_MESSAGE_FD>/dev/null ++fi ++_LTEOF ++ ++cat >>"$CONFIG_LT" <<_LTEOF ++_LT_OUTPUT_LIBTOOL_COMMANDS_INIT ++_LTEOF ++ ++cat >>"$CONFIG_LT" <<\_LTEOF ++AC_MSG_NOTICE([creating $ofile]) ++_LT_OUTPUT_LIBTOOL_COMMANDS ++AS_EXIT(0) ++_LTEOF ++chmod +x "$CONFIG_LT" ++ ++# configure is writing to config.log, but config.lt does its own redirection, ++# appending to config.log, which fails on DOS, as config.log is still kept ++# open by configure. Here we exec the FD to /dev/null, effectively closing ++# config.log, so it can be properly (re)opened and appended to by config.lt. ++if test "$no_create" != yes; then ++ lt_cl_success=: ++ test "$silent" = yes && ++ lt_config_lt_args="$lt_config_lt_args --quiet" ++ exec AS_MESSAGE_LOG_FD>/dev/null ++ $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false ++ exec AS_MESSAGE_LOG_FD>>config.log ++ $lt_cl_success || AS_EXIT(1) ++fi ++])# LT_OUTPUT ++ ++ ++# _LT_CONFIG(TAG) ++# --------------- ++# If TAG is the built-in tag, create an initial libtool script with a ++# default configuration from the untagged config vars. Otherwise add code ++# to config.status for appending the configuration named by TAG from the ++# matching tagged config vars. ++m4_defun([_LT_CONFIG], ++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++_LT_CONFIG_SAVE_COMMANDS([ ++ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl ++ m4_if(_LT_TAG, [C], [ ++ # See if we are running on zsh, and set the options which allow our ++ # commands through without removal of \ escapes. ++ if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++ fi ++ ++ cfgfile="${ofile}T" ++ trap "$RM \"$cfgfile\"; exit 1" 1 2 15 ++ $RM "$cfgfile" ++ ++ cat <<_LT_EOF >> "$cfgfile" ++#! $SHELL ++ ++# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. ++# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION ++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: ++# NOTE: Changes made to this file will be lost: look at ltmain.sh. ++# ++_LT_COPYING ++_LT_LIBTOOL_TAGS ++ ++# ### BEGIN LIBTOOL CONFIG ++_LT_LIBTOOL_CONFIG_VARS ++_LT_LIBTOOL_TAG_VARS ++# ### END LIBTOOL CONFIG ++ ++_LT_EOF ++ ++ case $host_os in ++ aix3*) ++ cat <<\_LT_EOF >> "$cfgfile" ++# AIX sometimes has problems with the GCC collect2 program. For some ++# reason, if we set the COLLECT_NAMES environment variable, the problems ++# vanish in a puff of smoke. ++if test "X${COLLECT_NAMES+set}" != Xset; then ++ COLLECT_NAMES= ++ export COLLECT_NAMES ++fi ++_LT_EOF ++ ;; ++ esac ++ ++ _LT_PROG_LTMAIN ++ ++ # We use sed instead of cat because bash on DJGPP gets confused if ++ # if finds mixed CR/LF and LF-only lines. Since sed operates in ++ # text mode, it properly converts lines to CR/LF. This bash problem ++ # is reportedly fixed, but why not run on old versions too? ++ sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ ++ || (rm -f "$cfgfile"; exit 1) ++ ++ _LT_PROG_XSI_SHELLFNS ++ ++ sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ ++ || (rm -f "$cfgfile"; exit 1) ++ ++ mv -f "$cfgfile" "$ofile" || ++ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") ++ chmod +x "$ofile" ++], ++[cat <<_LT_EOF >> "$ofile" ++ ++dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded ++dnl in a comment (ie after a #). ++# ### BEGIN LIBTOOL TAG CONFIG: $1 ++_LT_LIBTOOL_TAG_VARS(_LT_TAG) ++# ### END LIBTOOL TAG CONFIG: $1 ++_LT_EOF ++])dnl /m4_if ++], ++[m4_if([$1], [], [ ++ PACKAGE='$PACKAGE' ++ VERSION='$VERSION' ++ TIMESTAMP='$TIMESTAMP' ++ RM='$RM' ++ ofile='$ofile'], []) ++])dnl /_LT_CONFIG_SAVE_COMMANDS ++])# _LT_CONFIG ++ ++ ++# LT_SUPPORTED_TAG(TAG) ++# --------------------- ++# Trace this macro to discover what tags are supported by the libtool ++# --tag option, using: ++# autoconf --trace 'LT_SUPPORTED_TAG:$1' ++AC_DEFUN([LT_SUPPORTED_TAG], []) ++ ++ ++# C support is built-in for now ++m4_define([_LT_LANG_C_enabled], []) ++m4_define([_LT_TAGS], []) ++ ++ ++# LT_LANG(LANG) ++# ------------- ++# Enable libtool support for the given language if not already enabled. ++AC_DEFUN([LT_LANG], ++[AC_BEFORE([$0], [LT_OUTPUT])dnl ++m4_case([$1], ++ [C], [_LT_LANG(C)], ++ [C++], [_LT_LANG(CXX)], ++ [Java], [_LT_LANG(GCJ)], ++ [Fortran 77], [_LT_LANG(F77)], ++ [Fortran], [_LT_LANG(FC)], ++ [Windows Resource], [_LT_LANG(RC)], ++ [m4_ifdef([_LT_LANG_]$1[_CONFIG], ++ [_LT_LANG($1)], ++ [m4_fatal([$0: unsupported language: "$1"])])])dnl ++])# LT_LANG ++ ++ ++# _LT_LANG(LANGNAME) ++# ------------------ ++m4_defun([_LT_LANG], ++[m4_ifdef([_LT_LANG_]$1[_enabled], [], ++ [LT_SUPPORTED_TAG([$1])dnl ++ m4_append([_LT_TAGS], [$1 ])dnl ++ m4_define([_LT_LANG_]$1[_enabled], [])dnl ++ _LT_LANG_$1_CONFIG($1)])dnl ++])# _LT_LANG ++ ++ ++# _LT_LANG_DEFAULT_CONFIG ++# ----------------------- ++m4_defun([_LT_LANG_DEFAULT_CONFIG], ++[AC_PROVIDE_IFELSE([AC_PROG_CXX], ++ [LT_LANG(CXX)], ++ [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) ++ ++AC_PROVIDE_IFELSE([AC_PROG_F77], ++ [LT_LANG(F77)], ++ [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) ++ ++AC_PROVIDE_IFELSE([AC_PROG_FC], ++ [LT_LANG(FC)], ++ [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) ++ ++dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal ++dnl pulling things in needlessly. ++AC_PROVIDE_IFELSE([AC_PROG_GCJ], ++ [LT_LANG(GCJ)], ++ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], ++ [LT_LANG(GCJ)], ++ [AC_PROVIDE_IFELSE([LT_PROG_GCJ], ++ [LT_LANG(GCJ)], ++ [m4_ifdef([AC_PROG_GCJ], ++ [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) ++ m4_ifdef([A][M_PROG_GCJ], ++ [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) ++ m4_ifdef([LT_PROG_GCJ], ++ [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) ++ ++AC_PROVIDE_IFELSE([LT_PROG_RC], ++ [LT_LANG(RC)], ++ [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) ++])# _LT_LANG_DEFAULT_CONFIG ++ ++# Obsolete macros: ++AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) ++AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) ++AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) ++AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_CXX], []) ++dnl AC_DEFUN([AC_LIBTOOL_F77], []) ++dnl AC_DEFUN([AC_LIBTOOL_FC], []) ++dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) ++ ++ ++# _LT_TAG_COMPILER ++# ---------------- ++m4_defun([_LT_TAG_COMPILER], ++[AC_REQUIRE([AC_PROG_CC])dnl ++ ++_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl ++_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl ++_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl ++_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl ++ ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} ++ ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++ ++# Allow CC to be a program name with arguments. ++compiler=$CC ++])# _LT_TAG_COMPILER ++ ++ ++# _LT_COMPILER_BOILERPLATE ++# ------------------------ ++# Check for compiler boilerplate output or warnings with ++# the simple compiler test code. ++m4_defun([_LT_COMPILER_BOILERPLATE], ++[m4_require([_LT_DECL_SED])dnl ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_compile_test_code" >conftest.$ac_ext ++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_compiler_boilerplate=`cat conftest.err` ++$RM conftest* ++])# _LT_COMPILER_BOILERPLATE ++ ++ ++# _LT_LINKER_BOILERPLATE ++# ---------------------- ++# Check for linker boilerplate output or warnings with ++# the simple link test code. ++m4_defun([_LT_LINKER_BOILERPLATE], ++[m4_require([_LT_DECL_SED])dnl ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_link_test_code" >conftest.$ac_ext ++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_linker_boilerplate=`cat conftest.err` ++$RM -r conftest* ++])# _LT_LINKER_BOILERPLATE ++ ++# _LT_REQUIRED_DARWIN_CHECKS ++# ------------------------- ++m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ ++ case $host_os in ++ rhapsody* | darwin*) ++ AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) ++ AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) ++ AC_CHECK_TOOL([LIPO], [lipo], [:]) ++ AC_CHECK_TOOL([OTOOL], [otool], [:]) ++ AC_CHECK_TOOL([OTOOL64], [otool64], [:]) ++ _LT_DECL([], [DSYMUTIL], [1], ++ [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) ++ _LT_DECL([], [NMEDIT], [1], ++ [Tool to change global to local symbols on Mac OS X]) ++ _LT_DECL([], [LIPO], [1], ++ [Tool to manipulate fat objects and archives on Mac OS X]) ++ _LT_DECL([], [OTOOL], [1], ++ [ldd/readelf like tool for Mach-O binaries on Mac OS X]) ++ _LT_DECL([], [OTOOL64], [1], ++ [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) ++ ++ AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], ++ [lt_cv_apple_cc_single_mod=no ++ if test -z "${LT_MULTI_MODULE}"; then ++ # By default we will add the -single_module flag. You can override ++ # by either setting the environment variable LT_MULTI_MODULE ++ # non-empty at configure time, or by adding -multi_module to the ++ # link flags. ++ rm -rf libconftest.dylib* ++ echo "int foo(void){return 1;}" > conftest.c ++ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ ++-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD ++ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ ++ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err ++ _lt_result=$? ++ if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then ++ lt_cv_apple_cc_single_mod=yes ++ else ++ cat conftest.err >&AS_MESSAGE_LOG_FD ++ fi ++ rm -rf libconftest.dylib* ++ rm -f conftest.* ++ fi]) ++ AC_CACHE_CHECK([for -exported_symbols_list linker flag], ++ [lt_cv_ld_exported_symbols_list], ++ [lt_cv_ld_exported_symbols_list=no ++ save_LDFLAGS=$LDFLAGS ++ echo "_main" > conftest.sym ++ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" ++ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], ++ [lt_cv_ld_exported_symbols_list=yes], ++ [lt_cv_ld_exported_symbols_list=no]) ++ LDFLAGS="$save_LDFLAGS" ++ ]) ++ case $host_os in ++ rhapsody* | darwin1.[[012]]) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; ++ darwin1.*) ++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; ++ darwin*) # darwin 5.x on ++ # if running on 10.5 or later, the deployment target defaults ++ # to the OS version, if on x86, and 10.4, the deployment ++ # target defaults to 10.4. Don't you love it? ++ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in ++ 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; ++ 10.[[012]]*) ++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; ++ 10.*) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; ++ esac ++ ;; ++ esac ++ if test "$lt_cv_apple_cc_single_mod" = "yes"; then ++ _lt_dar_single_mod='$single_module' ++ fi ++ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then ++ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' ++ else ++ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ fi ++ if test "$DSYMUTIL" != ":"; then ++ _lt_dsymutil='~$DSYMUTIL $lib || :' ++ else ++ _lt_dsymutil= ++ fi ++ ;; ++ esac ++]) ++ ++ ++# _LT_DARWIN_LINKER_FEATURES ++# -------------------------- ++# Checks for linker and compiler features on darwin ++m4_defun([_LT_DARWIN_LINKER_FEATURES], ++[ ++ m4_require([_LT_REQUIRED_DARWIN_CHECKS]) ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ _LT_TAGVAR(hardcode_automatic, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='' ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" ++ if test "$GCC" = "yes"; then ++ output_verbose_link_cmd=echo ++ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" ++ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" ++ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" ++ _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" ++ m4_if([$1], [CXX], ++[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then ++ _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" ++ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" ++ fi ++],[]) ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++]) ++ ++# _LT_SYS_MODULE_PATH_AIX ++# ----------------------- ++# Links a minimal program and checks the executable ++# for the system default hardcoded library path. In most cases, ++# this is /usr/lib:/lib, but when the MPI compilers are used ++# the location of the communication and MPI libs are included too. ++# If we don't find anything, use the default library path according ++# to the aix ld manual. ++m4_defun([_LT_SYS_MODULE_PATH_AIX], ++[m4_require([_LT_DECL_SED])dnl ++AC_LINK_IFELSE(AC_LANG_PROGRAM,[ ++lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *\(.*\)$/\1/ ++ p ++ } ++ }' ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then ++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++fi],[]) ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++])# _LT_SYS_MODULE_PATH_AIX ++ ++ ++# _LT_SHELL_INIT(ARG) ++# ------------------- ++m4_define([_LT_SHELL_INIT], ++[ifdef([AC_DIVERSION_NOTICE], ++ [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], ++ [AC_DIVERT_PUSH(NOTICE)]) ++$1 ++AC_DIVERT_POP ++])# _LT_SHELL_INIT ++ ++ ++# _LT_PROG_ECHO_BACKSLASH ++# ----------------------- ++# Add some code to the start of the generated configure script which ++# will find an echo command which doesn't interpret backslashes. ++m4_defun([_LT_PROG_ECHO_BACKSLASH], ++[_LT_SHELL_INIT([ ++# Check that we are running under the correct shell. ++SHELL=${CONFIG_SHELL-/bin/sh} ++ ++case X$lt_ECHO in ++X*--fallback-echo) ++ # Remove one level of quotation (which was required for Make). ++ ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` ++ ;; ++esac ++ ++ECHO=${lt_ECHO-echo} ++if test "X[$]1" = X--no-reexec; then ++ # Discard the --no-reexec flag, and continue. ++ shift ++elif test "X[$]1" = X--fallback-echo; then ++ # Avoid inline document here, it may be left over ++ : ++elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then ++ # Yippee, $ECHO works! ++ : ++else ++ # Restart under the correct shell. ++ exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} ++fi ++ ++if test "X[$]1" = X--fallback-echo; then ++ # used as fallback echo ++ shift ++ cat <<_LT_EOF ++[$]* ++_LT_EOF ++ exit 0 ++fi ++ ++# The HP-UX ksh and POSIX shell print the target directory to stdout ++# if CDPATH is set. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++ ++if test -z "$lt_ECHO"; then ++ if test "X${echo_test_string+set}" != Xset; then ++ # find a string as large as possible, as long as the shell can cope with it ++ for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do ++ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... ++ if { echo_test_string=`eval $cmd`; } 2>/dev/null && ++ { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null ++ then ++ break ++ fi ++ done ++ fi ++ ++ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ : ++ else ++ # The Solaris, AIX, and Digital Unix default echo programs unquote ++ # backslashes. This makes it impossible to quote backslashes using ++ # echo "$something" | sed 's/\\/\\\\/g' ++ # ++ # So, first we look for a working echo in the user's PATH. ++ ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for dir in $PATH /usr/ucb; do ++ IFS="$lt_save_ifs" ++ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && ++ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ ECHO="$dir/echo" ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ++ if test "X$ECHO" = Xecho; then ++ # We didn't find a better echo, so look for alternatives. ++ if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ # This shell has a builtin print -r that does the trick. ++ ECHO='print -r' ++ elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && ++ test "X$CONFIG_SHELL" != X/bin/ksh; then ++ # If we have ksh, try running configure again with it. ++ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} ++ export ORIGINAL_CONFIG_SHELL ++ CONFIG_SHELL=/bin/ksh ++ export CONFIG_SHELL ++ exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} ++ else ++ # Try using printf. ++ ECHO='printf %s\n' ++ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ # Cool, printf works ++ : ++ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && ++ test "X$echo_testing_string" = 'X\t' && ++ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL ++ export CONFIG_SHELL ++ SHELL="$CONFIG_SHELL" ++ export SHELL ++ ECHO="$CONFIG_SHELL [$]0 --fallback-echo" ++ elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && ++ test "X$echo_testing_string" = 'X\t' && ++ echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ ECHO="$CONFIG_SHELL [$]0 --fallback-echo" ++ else ++ # maybe with a smaller string... ++ prev=: ++ ++ for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do ++ if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null ++ then ++ break ++ fi ++ prev="$cmd" ++ done ++ ++ if test "$prev" != 'sed 50q "[$]0"'; then ++ echo_test_string=`eval $prev` ++ export echo_test_string ++ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} ++ else ++ # Oops. We lost completely, so just stick with echo. ++ ECHO=echo ++ fi ++ fi ++ fi ++ fi ++ fi ++fi ++ ++# Copy echo and quote the copy suitably for passing to libtool from ++# the Makefile, instead of quoting the original, which is used later. ++lt_ECHO=$ECHO ++if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then ++ lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" ++fi ++ ++AC_SUBST(lt_ECHO) ++]) ++_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) ++_LT_DECL([], [ECHO], [1], ++ [An echo program that does not interpret backslashes]) ++])# _LT_PROG_ECHO_BACKSLASH ++ ++ ++# _LT_ENABLE_LOCK ++# --------------- ++m4_defun([_LT_ENABLE_LOCK], ++[AC_ARG_ENABLE([libtool-lock], ++ [AS_HELP_STRING([--disable-libtool-lock], ++ [avoid locking (might break parallel builds)])]) ++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes ++ ++# Some flags need to be propagated to the compiler or linker for good ++# libtool support. ++case $host in ++ia64-*-hpux*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if AC_TRY_EVAL(ac_compile); then ++ case `/usr/bin/file conftest.$ac_objext` in ++ *ELF-32*) ++ HPUX_IA64_MODE="32" ++ ;; ++ *ELF-64*) ++ HPUX_IA64_MODE="64" ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; ++*-*-irix6*) ++ # Find out which ABI we are using. ++ echo '[#]line __oline__ "configure"' > conftest.$ac_ext ++ if AC_TRY_EVAL(ac_compile); then ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ case `/usr/bin/file conftest.$ac_objext` in ++ *32-bit*) ++ LD="${LD-ld} -melf32bsmip" ++ ;; ++ *N32*) ++ LD="${LD-ld} -melf32bmipn32" ++ ;; ++ *64-bit*) ++ LD="${LD-ld} -melf64bmip" ++ ;; ++ esac ++ else ++ case `/usr/bin/file conftest.$ac_objext` in ++ *32-bit*) ++ LD="${LD-ld} -32" ++ ;; ++ *N32*) ++ LD="${LD-ld} -n32" ++ ;; ++ *64-bit*) ++ LD="${LD-ld} -64" ++ ;; ++ esac ++ fi ++ fi ++ rm -rf conftest* ++ ;; ++ ++x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ ++s390*-*linux*|s390*-*tpf*|sparc*-*linux*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if AC_TRY_EVAL(ac_compile); then ++ case `/usr/bin/file conftest.o` in ++ *32-bit*) ++ case $host in ++ x86_64-*kfreebsd*-gnu) ++ LD="${LD-ld} -m elf_i386_fbsd" ++ ;; ++ x86_64-*linux*) ++ LD="${LD-ld} -m elf_i386" ++ ;; ++ ppc64-*linux*|powerpc64-*linux*) ++ LD="${LD-ld} -m elf32ppclinux" ++ ;; ++ s390x-*linux*) ++ LD="${LD-ld} -m elf_s390" ++ ;; ++ sparc64-*linux*) ++ LD="${LD-ld} -m elf32_sparc" ++ ;; ++ esac ++ ;; ++ *64-bit*) ++ case $host in ++ x86_64-*kfreebsd*-gnu) ++ LD="${LD-ld} -m elf_x86_64_fbsd" ++ ;; ++ x86_64-*linux*) ++ LD="${LD-ld} -m elf_x86_64" ++ ;; ++ ppc*-*linux*|powerpc*-*linux*) ++ LD="${LD-ld} -m elf64ppc" ++ ;; ++ s390*-*linux*|s390*-*tpf*) ++ LD="${LD-ld} -m elf64_s390" ++ ;; ++ sparc*-*linux*) ++ LD="${LD-ld} -m elf64_sparc" ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; ++ ++*-*-sco3.2v5*) ++ # On SCO OpenServer 5, we need -belf to get full-featured binaries. ++ SAVE_CFLAGS="$CFLAGS" ++ CFLAGS="$CFLAGS -belf" ++ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, ++ [AC_LANG_PUSH(C) ++ AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) ++ AC_LANG_POP]) ++ if test x"$lt_cv_cc_needs_belf" != x"yes"; then ++ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf ++ CFLAGS="$SAVE_CFLAGS" ++ fi ++ ;; ++sparc*-*solaris*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if AC_TRY_EVAL(ac_compile); then ++ case `/usr/bin/file conftest.o` in ++ *64-bit*) ++ case $lt_cv_prog_gnu_ld in ++ yes*) LD="${LD-ld} -m elf64_sparc" ;; ++ *) ++ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then ++ LD="${LD-ld} -64" ++ fi ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; ++esac ++ ++need_locks="$enable_libtool_lock" ++])# _LT_ENABLE_LOCK ++ ++ ++# _LT_CMD_OLD_ARCHIVE ++# ------------------- ++m4_defun([_LT_CMD_OLD_ARCHIVE], ++[AC_CHECK_TOOL(AR, ar, false) ++test -z "$AR" && AR=ar ++test -z "$AR_FLAGS" && AR_FLAGS=cru ++_LT_DECL([], [AR], [1], [The archiver]) ++_LT_DECL([], [AR_FLAGS], [1]) ++ ++AC_CHECK_TOOL(STRIP, strip, :) ++test -z "$STRIP" && STRIP=: ++_LT_DECL([], [STRIP], [1], [A symbol stripping program]) ++ ++AC_CHECK_TOOL(RANLIB, ranlib, :) ++test -z "$RANLIB" && RANLIB=: ++_LT_DECL([], [RANLIB], [1], ++ [Commands used to install an old-style archive]) ++ ++# Determine commands to create old-style static archives. ++old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' ++old_postinstall_cmds='chmod 644 $oldlib' ++old_postuninstall_cmds= ++ ++if test -n "$RANLIB"; then ++ case $host_os in ++ openbsd*) ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" ++ ;; ++ *) ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" ++ ;; ++ esac ++ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" ++fi ++_LT_DECL([], [old_postinstall_cmds], [2]) ++_LT_DECL([], [old_postuninstall_cmds], [2]) ++_LT_TAGDECL([], [old_archive_cmds], [2], ++ [Commands used to build an old-style archive]) ++])# _LT_CMD_OLD_ARCHIVE ++ ++ ++# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, ++# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) ++# ---------------------------------------------------------------- ++# Check whether the given compiler option works ++AC_DEFUN([_LT_COMPILER_OPTION], ++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_DECL_SED])dnl ++AC_CACHE_CHECK([$1], [$2], ++ [$2=no ++ m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="$3" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&AS_MESSAGE_LOG_FD ++ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ $2=yes ++ fi ++ fi ++ $RM conftest* ++]) ++ ++if test x"[$]$2" = xyes; then ++ m4_if([$5], , :, [$5]) ++else ++ m4_if([$6], , :, [$6]) ++fi ++])# _LT_COMPILER_OPTION ++ ++# Old name: ++AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) ++ ++ ++# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, ++# [ACTION-SUCCESS], [ACTION-FAILURE]) ++# ---------------------------------------------------- ++# Check whether the given linker option works ++AC_DEFUN([_LT_LINKER_OPTION], ++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_DECL_SED])dnl ++AC_CACHE_CHECK([$1], [$2], ++ [$2=no ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS $3" ++ echo "$lt_simple_link_test_code" > conftest.$ac_ext ++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then ++ # The linker can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ if test -s conftest.err; then ++ # Append any errors to the config.log. ++ cat conftest.err 1>&AS_MESSAGE_LOG_FD ++ $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if diff conftest.exp conftest.er2 >/dev/null; then ++ $2=yes ++ fi ++ else ++ $2=yes ++ fi ++ fi ++ $RM -r conftest* ++ LDFLAGS="$save_LDFLAGS" ++]) ++ ++if test x"[$]$2" = xyes; then ++ m4_if([$4], , :, [$4]) ++else ++ m4_if([$5], , :, [$5]) ++fi ++])# _LT_LINKER_OPTION ++ ++# Old name: ++AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) ++ ++ ++# LT_CMD_MAX_LEN ++#--------------- ++AC_DEFUN([LT_CMD_MAX_LEN], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl ++# find the maximum length of command line arguments ++AC_MSG_CHECKING([the maximum length of command line arguments]) ++AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl ++ i=0 ++ teststring="ABCD" ++ ++ case $build_os in ++ msdosdjgpp*) ++ # On DJGPP, this test can blow up pretty badly due to problems in libc ++ # (any single argument exceeding 2000 bytes causes a buffer overrun ++ # during glob expansion). Even if it were fixed, the result of this ++ # check would be larger than it should be. ++ lt_cv_sys_max_cmd_len=12288; # 12K is about right ++ ;; ++ ++ gnu*) ++ # Under GNU Hurd, this test is not required because there is ++ # no limit to the length of command line arguments. ++ # Libtool will interpret -1 as no limit whatsoever ++ lt_cv_sys_max_cmd_len=-1; ++ ;; ++ ++ cygwin* | mingw*) ++ # On Win9x/ME, this test blows up -- it succeeds, but takes ++ # about 5 minutes as the teststring grows exponentially. ++ # Worse, since 9x/ME are not pre-emptively multitasking, ++ # you end up with a "frozen" computer, even though with patience ++ # the test eventually succeeds (with a max line length of 256k). ++ # Instead, let's just punt: use the minimum linelength reported by ++ # all of the supported platforms: 8192 (on NT/2K/XP). ++ lt_cv_sys_max_cmd_len=8192; ++ ;; ++ ++ amigaos*) ++ # On AmigaOS with pdksh, this test takes hours, literally. ++ # So we just punt and use a minimum line length of 8192. ++ lt_cv_sys_max_cmd_len=8192; ++ ;; ++ ++ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) ++ # This has been around since 386BSD, at least. Likely further. ++ if test -x /sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` ++ elif test -x /usr/sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` ++ else ++ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs ++ fi ++ # And add a safety zone ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ ;; ++ ++ interix*) ++ # We know the value 262144 and hardcode it with a safety zone (like BSD) ++ lt_cv_sys_max_cmd_len=196608 ++ ;; ++ ++ osf*) ++ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure ++ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not ++ # nice to cause kernel panics so lets avoid the loop below. ++ # First set a reasonable default. ++ lt_cv_sys_max_cmd_len=16384 ++ # ++ if test -x /sbin/sysconfig; then ++ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in ++ *1*) lt_cv_sys_max_cmd_len=-1 ;; ++ esac ++ fi ++ ;; ++ sco3.2v5*) ++ lt_cv_sys_max_cmd_len=102400 ++ ;; ++ sysv5* | sco5v6* | sysv4.2uw2*) ++ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` ++ if test -n "$kargmax"; then ++ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` ++ else ++ lt_cv_sys_max_cmd_len=32768 ++ fi ++ ;; ++ *) ++ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` ++ if test -n "$lt_cv_sys_max_cmd_len"; then ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ else ++ # Make teststring a little bigger before we do anything with it. ++ # a 1K string should be a reasonable start. ++ for i in 1 2 3 4 5 6 7 8 ; do ++ teststring=$teststring$teststring ++ done ++ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} ++ # If test is not a shell built-in, we'll probably end up computing a ++ # maximum length that is only half of the actual maximum length, but ++ # we can't tell. ++ while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ ++ = "XX$teststring$teststring"; } >/dev/null 2>&1 && ++ test $i != 17 # 1/2 MB should be enough ++ do ++ i=`expr $i + 1` ++ teststring=$teststring$teststring ++ done ++ # Only check the string length outside the loop. ++ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` ++ teststring= ++ # Add a significant safety factor because C++ compilers can tack on ++ # massive amounts of additional arguments before passing them to the ++ # linker. It appears as though 1/2 is a usable value. ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` ++ fi ++ ;; ++ esac ++]) ++if test -n $lt_cv_sys_max_cmd_len ; then ++ AC_MSG_RESULT($lt_cv_sys_max_cmd_len) ++else ++ AC_MSG_RESULT(none) ++fi ++max_cmd_len=$lt_cv_sys_max_cmd_len ++_LT_DECL([], [max_cmd_len], [0], ++ [What is the maximum length of a command?]) ++])# LT_CMD_MAX_LEN ++ ++# Old name: ++AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) ++ ++ ++# _LT_HEADER_DLFCN ++# ---------------- ++m4_defun([_LT_HEADER_DLFCN], ++[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl ++])# _LT_HEADER_DLFCN ++ ++ ++# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, ++# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) ++# ---------------------------------------------------------------- ++m4_defun([_LT_TRY_DLOPEN_SELF], ++[m4_require([_LT_HEADER_DLFCN])dnl ++if test "$cross_compiling" = yes; then : ++ [$4] ++else ++ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 ++ lt_status=$lt_dlunknown ++ cat > conftest.$ac_ext <<_LT_EOF ++[#line __oline__ "configure" ++#include "confdefs.h" ++ ++#if HAVE_DLFCN_H ++#include ++#endif ++ ++#include ++ ++#ifdef RTLD_GLOBAL ++# define LT_DLGLOBAL RTLD_GLOBAL ++#else ++# ifdef DL_GLOBAL ++# define LT_DLGLOBAL DL_GLOBAL ++# else ++# define LT_DLGLOBAL 0 ++# endif ++#endif ++ ++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we ++ find out it does not work in some platform. */ ++#ifndef LT_DLLAZY_OR_NOW ++# ifdef RTLD_LAZY ++# define LT_DLLAZY_OR_NOW RTLD_LAZY ++# else ++# ifdef DL_LAZY ++# define LT_DLLAZY_OR_NOW DL_LAZY ++# else ++# ifdef RTLD_NOW ++# define LT_DLLAZY_OR_NOW RTLD_NOW ++# else ++# ifdef DL_NOW ++# define LT_DLLAZY_OR_NOW DL_NOW ++# else ++# define LT_DLLAZY_OR_NOW 0 ++# endif ++# endif ++# endif ++# endif ++#endif ++ ++#ifdef __cplusplus ++extern "C" void exit (int); ++#endif ++ ++void fnord() { int i=42;} ++int main () ++{ ++ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); ++ int status = $lt_dlunknown; ++ ++ if (self) ++ { ++ if (dlsym (self,"fnord")) status = $lt_dlno_uscore; ++ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; ++ /* dlclose (self); */ ++ } ++ else ++ puts (dlerror ()); ++ ++ exit (status); ++}] ++_LT_EOF ++ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then ++ (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null ++ lt_status=$? ++ case x$lt_status in ++ x$lt_dlno_uscore) $1 ;; ++ x$lt_dlneed_uscore) $2 ;; ++ x$lt_dlunknown|x*) $3 ;; ++ esac ++ else : ++ # compilation failed ++ $3 ++ fi ++fi ++rm -fr conftest* ++])# _LT_TRY_DLOPEN_SELF ++ ++ ++# LT_SYS_DLOPEN_SELF ++# ------------------ ++AC_DEFUN([LT_SYS_DLOPEN_SELF], ++[m4_require([_LT_HEADER_DLFCN])dnl ++if test "x$enable_dlopen" != xyes; then ++ enable_dlopen=unknown ++ enable_dlopen_self=unknown ++ enable_dlopen_self_static=unknown ++else ++ lt_cv_dlopen=no ++ lt_cv_dlopen_libs= ++ ++ case $host_os in ++ beos*) ++ lt_cv_dlopen="load_add_on" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes ++ ;; ++ ++ mingw* | pw32*) ++ lt_cv_dlopen="LoadLibrary" ++ lt_cv_dlopen_libs= ++ ;; ++ ++ cygwin*) ++ lt_cv_dlopen="dlopen" ++ lt_cv_dlopen_libs= ++ ;; ++ ++ darwin*) ++ # if libdl is installed we need to link against it ++ AC_CHECK_LIB([dl], [dlopen], ++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ ++ lt_cv_dlopen="dyld" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes ++ ]) ++ ;; ++ ++ *) ++ AC_CHECK_FUNC([shl_load], ++ [lt_cv_dlopen="shl_load"], ++ [AC_CHECK_LIB([dld], [shl_load], ++ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], ++ [AC_CHECK_FUNC([dlopen], ++ [lt_cv_dlopen="dlopen"], ++ [AC_CHECK_LIB([dl], [dlopen], ++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], ++ [AC_CHECK_LIB([svld], [dlopen], ++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], ++ [AC_CHECK_LIB([dld], [dld_link], ++ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) ++ ]) ++ ]) ++ ]) ++ ]) ++ ]) ++ ;; ++ esac ++ ++ if test "x$lt_cv_dlopen" != xno; then ++ enable_dlopen=yes ++ else ++ enable_dlopen=no ++ fi ++ ++ case $lt_cv_dlopen in ++ dlopen) ++ save_CPPFLAGS="$CPPFLAGS" ++ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" ++ ++ save_LDFLAGS="$LDFLAGS" ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" ++ ++ save_LIBS="$LIBS" ++ LIBS="$lt_cv_dlopen_libs $LIBS" ++ ++ AC_CACHE_CHECK([whether a program can dlopen itself], ++ lt_cv_dlopen_self, [dnl ++ _LT_TRY_DLOPEN_SELF( ++ lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, ++ lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) ++ ]) ++ ++ if test "x$lt_cv_dlopen_self" = xyes; then ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" ++ AC_CACHE_CHECK([whether a statically linked program can dlopen itself], ++ lt_cv_dlopen_self_static, [dnl ++ _LT_TRY_DLOPEN_SELF( ++ lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, ++ lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) ++ ]) ++ fi ++ ++ CPPFLAGS="$save_CPPFLAGS" ++ LDFLAGS="$save_LDFLAGS" ++ LIBS="$save_LIBS" ++ ;; ++ esac ++ ++ case $lt_cv_dlopen_self in ++ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; ++ *) enable_dlopen_self=unknown ;; ++ esac ++ ++ case $lt_cv_dlopen_self_static in ++ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; ++ *) enable_dlopen_self_static=unknown ;; ++ esac ++fi ++_LT_DECL([dlopen_support], [enable_dlopen], [0], ++ [Whether dlopen is supported]) ++_LT_DECL([dlopen_self], [enable_dlopen_self], [0], ++ [Whether dlopen of programs is supported]) ++_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], ++ [Whether dlopen of statically linked programs is supported]) ++])# LT_SYS_DLOPEN_SELF ++ ++# Old name: ++AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) ++ ++ ++# _LT_COMPILER_C_O([TAGNAME]) ++# --------------------------- ++# Check to see if options -c and -o are simultaneously supported by compiler. ++# This macro does not hard code the compiler like AC_PROG_CC_C_O. ++m4_defun([_LT_COMPILER_C_O], ++[m4_require([_LT_DECL_SED])dnl ++m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_TAG_COMPILER])dnl ++AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], ++ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], ++ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no ++ $RM -r conftest 2>/dev/null ++ mkdir conftest ++ cd conftest ++ mkdir out ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ lt_compiler_flag="-o out/conftest2.$ac_objext" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) ++ (eval "$lt_compile" 2>out/conftest.err) ++ ac_status=$? ++ cat out/conftest.err >&AS_MESSAGE_LOG_FD ++ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD ++ if (exit $ac_status) && test -s out/conftest2.$ac_objext ++ then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then ++ _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes ++ fi ++ fi ++ chmod u+w . 2>&AS_MESSAGE_LOG_FD ++ $RM conftest* ++ # SGI C++ compiler will create directory out/ii_files/ for ++ # template instantiation ++ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files ++ $RM out/* && rmdir out ++ cd .. ++ $RM -r conftest ++ $RM conftest* ++]) ++_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], ++ [Does compiler simultaneously support -c and -o options?]) ++])# _LT_COMPILER_C_O ++ ++ ++# _LT_COMPILER_FILE_LOCKS([TAGNAME]) ++# ---------------------------------- ++# Check to see if we can do hard links to lock some files if needed ++m4_defun([_LT_COMPILER_FILE_LOCKS], ++[m4_require([_LT_ENABLE_LOCK])dnl ++m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++_LT_COMPILER_C_O([$1]) ++ ++hard_links="nottested" ++if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then ++ # do not overwrite the value of need_locks provided by the user ++ AC_MSG_CHECKING([if we can lock with hard links]) ++ hard_links=yes ++ $RM conftest* ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ touch conftest.a ++ ln conftest.a conftest.b 2>&5 || hard_links=no ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ AC_MSG_RESULT([$hard_links]) ++ if test "$hard_links" = no; then ++ AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) ++ need_locks=warn ++ fi ++else ++ need_locks=no ++fi ++_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) ++])# _LT_COMPILER_FILE_LOCKS ++ ++ ++# _LT_CHECK_OBJDIR ++# ---------------- ++m4_defun([_LT_CHECK_OBJDIR], ++[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], ++[rm -f .libs 2>/dev/null ++mkdir .libs 2>/dev/null ++if test -d .libs; then ++ lt_cv_objdir=.libs ++else ++ # MS-DOS does not allow filenames that begin with a dot. ++ lt_cv_objdir=_libs ++fi ++rmdir .libs 2>/dev/null]) ++objdir=$lt_cv_objdir ++_LT_DECL([], [objdir], [0], ++ [The name of the directory that contains temporary libtool files])dnl ++m4_pattern_allow([LT_OBJDIR])dnl ++AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", ++ [Define to the sub-directory in which libtool stores uninstalled libraries.]) ++])# _LT_CHECK_OBJDIR ++ ++ ++# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) ++# -------------------------------------- ++# Check hardcoding attributes. ++m4_defun([_LT_LINKER_HARDCODE_LIBPATH], ++[AC_MSG_CHECKING([how to hardcode library paths into programs]) ++_LT_TAGVAR(hardcode_action, $1)= ++if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || ++ test -n "$_LT_TAGVAR(runpath_var, $1)" || ++ test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then ++ ++ # We can hardcode non-existent directories. ++ if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && ++ # If the only mechanism to avoid hardcoding is shlibpath_var, we ++ # have to relink, otherwise we might link with an installed library ++ # when we should be linking with a yet-to-be-installed one ++ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && ++ test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then ++ # Linking always hardcodes the temporary library directory. ++ _LT_TAGVAR(hardcode_action, $1)=relink ++ else ++ # We can link without hardcoding, and we can hardcode nonexisting dirs. ++ _LT_TAGVAR(hardcode_action, $1)=immediate ++ fi ++else ++ # We cannot hardcode anything, or else we can only hardcode existing ++ # directories. ++ _LT_TAGVAR(hardcode_action, $1)=unsupported ++fi ++AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) ++ ++if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || ++ test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then ++ # Fast installation is not supported ++ enable_fast_install=no ++elif test "$shlibpath_overrides_runpath" = yes || ++ test "$enable_shared" = no; then ++ # Fast installation is not necessary ++ enable_fast_install=needless ++fi ++_LT_TAGDECL([], [hardcode_action], [0], ++ [How to hardcode a shared library path into an executable]) ++])# _LT_LINKER_HARDCODE_LIBPATH ++ ++ ++# _LT_CMD_STRIPLIB ++# ---------------- ++m4_defun([_LT_CMD_STRIPLIB], ++[m4_require([_LT_DECL_EGREP]) ++striplib= ++old_striplib= ++AC_MSG_CHECKING([whether stripping libraries is possible]) ++if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then ++ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" ++ test -z "$striplib" && striplib="$STRIP --strip-unneeded" ++ AC_MSG_RESULT([yes]) ++else ++# FIXME - insert some real tests, host_os isn't really good enough ++ case $host_os in ++ darwin*) ++ if test -n "$STRIP" ; then ++ striplib="$STRIP -x" ++ old_striplib="$STRIP -S" ++ AC_MSG_RESULT([yes]) ++ else ++ AC_MSG_RESULT([no]) ++ fi ++ ;; ++ *) ++ AC_MSG_RESULT([no]) ++ ;; ++ esac ++fi ++_LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) ++_LT_DECL([], [striplib], [1]) ++])# _LT_CMD_STRIPLIB ++ ++ ++# _LT_SYS_DYNAMIC_LINKER([TAG]) ++# ----------------------------- ++# PORTME Fill in your ld.so characteristics ++m4_defun([_LT_SYS_DYNAMIC_LINKER], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl ++m4_require([_LT_DECL_EGREP])dnl ++m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_DECL_SED])dnl ++AC_MSG_CHECKING([dynamic linker characteristics]) ++m4_if([$1], ++ [], [ ++if test "$GCC" = yes; then ++ case $host_os in ++ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; ++ *) lt_awk_arg="/^libraries:/" ;; ++ esac ++ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then ++ # if the path contains ";" then we assume it to be the separator ++ # otherwise default to the standard path separator (i.e. ":") - it is ++ # assumed that no part of a normal pathname contains ";" but that should ++ # okay in the real world where ";" in dirpaths is itself problematic. ++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ # Ok, now we have the path, separated by spaces, we can step through it ++ # and add multilib dir if necessary. ++ lt_tmp_lt_search_path_spec= ++ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` ++ for lt_sys_path in $lt_search_path_spec; do ++ if test -d "$lt_sys_path/$lt_multi_os_dir"; then ++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" ++ else ++ test -d "$lt_sys_path" && \ ++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" ++ fi ++ done ++ lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' ++BEGIN {RS=" "; FS="/|\n";} { ++ lt_foo=""; ++ lt_count=0; ++ for (lt_i = NF; lt_i > 0; lt_i--) { ++ if ($lt_i != "" && $lt_i != ".") { ++ if ($lt_i == "..") { ++ lt_count++; ++ } else { ++ if (lt_count == 0) { ++ lt_foo="/" $lt_i lt_foo; ++ } else { ++ lt_count--; ++ } ++ } ++ } ++ } ++ if (lt_foo != "") { lt_freq[[lt_foo]]++; } ++ if (lt_freq[[lt_foo]] == 1) { print lt_foo; } ++}'` ++ sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` ++else ++ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" ++fi]) ++library_names_spec= ++libname_spec='lib$name' ++soname_spec= ++shrext_cmds=".so" ++postinstall_cmds= ++postuninstall_cmds= ++finish_cmds= ++finish_eval= ++shlibpath_var= ++shlibpath_overrides_runpath=unknown ++version_type=none ++dynamic_linker="$host_os ld.so" ++sys_lib_dlsearch_path_spec="/lib /usr/lib" ++need_lib_prefix=unknown ++hardcode_into_libs=no ++ ++# when you set need_version to no, make sure it does not cause -set_version ++# flags to be left without arguments ++need_version=unknown ++ ++case $host_os in ++aix3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' ++ shlibpath_var=LIBPATH ++ ++ # AIX 3 has no versioning support, so we append a major version to the name. ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; ++ ++aix[[4-9]]*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ hardcode_into_libs=yes ++ if test "$host_cpu" = ia64; then ++ # AIX 5 supports IA64 ++ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ else ++ # With GCC up to 2.95.x, collect2 would create an import file ++ # for dependence libraries. The import file would start with ++ # the line `#! .'. This would cause the generated library to ++ # depend on `.', always an invalid library. This was fixed in ++ # development snapshots of GCC prior to 3.0. ++ case $host_os in ++ aix4 | aix4.[[01]] | aix4.[[01]].*) ++ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' ++ echo ' yes ' ++ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then ++ : ++ else ++ can_build_shared=no ++ fi ++ ;; ++ esac ++ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct ++ # soname into executable. Probably we can add versioning support to ++ # collect2, so additional links can be useful in future. ++ if test "$aix_use_runtimelinking" = yes; then ++ # If using run time linking (on AIX 4.2 or later) use lib.so ++ # instead of lib.a to let people know that these are not ++ # typical AIX shared libraries. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ else ++ # We preserve .a as extension for shared libraries through AIX4.2 ++ # and later when we are not doing run time linking. ++ library_names_spec='${libname}${release}.a $libname.a' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ fi ++ shlibpath_var=LIBPATH ++ fi ++ ;; ++ ++amigaos*) ++ case $host_cpu in ++ powerpc) ++ # Since July 2007 AmigaOS4 officially supports .so libraries. ++ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ ;; ++ m68k) ++ library_names_spec='$libname.ixlibrary $libname.a' ++ # Create ${libname}_ixlibrary.a entries in /sys/libs. ++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ++ ;; ++ esac ++ ;; ++ ++beos*) ++ library_names_spec='${libname}${shared_ext}' ++ dynamic_linker="$host_os ld.so" ++ shlibpath_var=LIBRARY_PATH ++ ;; ++ ++bsdi[[45]]*) ++ version_type=linux ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" ++ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" ++ # the default ld.so.conf also contains /usr/contrib/lib and ++ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow ++ # libtool to hard-code these into programs ++ ;; ++ ++cygwin* | mingw* | pw32*) ++ version_type=windows ++ shrext_cmds=".dll" ++ need_version=no ++ need_lib_prefix=no ++ ++ case $GCC,$host_os in ++ yes,cygwin* | yes,mingw* | yes,pw32*) ++ library_names_spec='$libname.dll.a' ++ # DLL is installed to $(libdir)/../bin by postinstall_cmds ++ postinstall_cmds='base_file=`basename \${file}`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ ++ dldir=$destdir/`dirname \$dlpath`~ ++ test -d \$dldir || mkdir -p \$dldir~ ++ $install_prog $dir/$dlname \$dldir/$dlname~ ++ chmod a+x \$dldir/$dlname~ ++ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then ++ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; ++ fi' ++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ ++ dlpath=$dir/\$dldll~ ++ $RM \$dlpath' ++ shlibpath_overrides_runpath=yes ++ ++ case $host_os in ++ cygwin*) ++ # Cygwin DLLs use 'cyg' prefix rather than 'lib' ++ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ++ ;; ++ mingw*) ++ # MinGW DLLs use traditional 'lib' prefix ++ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then ++ # It is most probably a Windows format PATH printed by ++ # mingw gcc, but we are running on Cygwin. Gcc prints its search ++ # path with ; separators, and with drive letters. We can handle the ++ # drive letters (cygwin fileutils understands them), so leave them, ++ # especially as we might pass files found there to a mingw objdump, ++ # which wouldn't understand a cygwinified path. Ahh. ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ ;; ++ pw32*) ++ # pw32 DLLs use 'pw' prefix rather than 'lib' ++ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ++ ;; ++ esac ++ ;; ++ ++ *) ++ library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' ++ ;; ++ esac ++ dynamic_linker='Win32 ld.exe' ++ # FIXME: first we should search . and the directory the executable is in ++ shlibpath_var=PATH ++ ;; ++ ++darwin* | rhapsody*) ++ dynamic_linker="$host_os dyld" ++ version_type=darwin ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' ++ soname_spec='${libname}${release}${major}$shared_ext' ++ shlibpath_overrides_runpath=yes ++ shlibpath_var=DYLD_LIBRARY_PATH ++ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' ++m4_if([$1], [],[ ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) ++ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ++ ;; ++ ++dgux*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; ++ ++freebsd1*) ++ dynamic_linker=no ++ ;; ++ ++freebsd* | dragonfly*) ++ # DragonFly does not have aout. When/if they implement a new ++ # versioning mechanism, adjust this. ++ if test -x /usr/bin/objformat; then ++ objformat=`/usr/bin/objformat` ++ else ++ case $host_os in ++ freebsd[[123]]*) objformat=aout ;; ++ *) objformat=elf ;; ++ esac ++ fi ++ version_type=freebsd-$objformat ++ case $version_type in ++ freebsd-elf*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ need_version=no ++ need_lib_prefix=no ++ ;; ++ freebsd-*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' ++ need_version=yes ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_os in ++ freebsd2*) ++ shlibpath_overrides_runpath=yes ++ ;; ++ freebsd3.[[01]]* | freebsdelf3.[[01]]*) ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ ++ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ *) # from 4.6 on, and DragonFly ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ esac ++ ;; ++ ++gnu*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ ;; ++ ++hpux9* | hpux10* | hpux11*) ++ # Give a soname corresponding to the major version so that dld.sl refuses to ++ # link against other versions. ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ case $host_cpu in ++ ia64*) ++ shrext_cmds='.so' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.so" ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ if test "X$HPUX_IA64_MODE" = X32; then ++ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" ++ else ++ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" ++ fi ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ hppa*64*) ++ shrext_cmds='.sl' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ *) ++ shrext_cmds='.sl' ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=SHLIB_PATH ++ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; ++ esac ++ # HP-UX runs *really* slowly unless shared libraries are mode 555. ++ postinstall_cmds='chmod 555 $lib' ++ ;; ++ ++interix[[3-9]]*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ ++irix5* | irix6* | nonstopux*) ++ case $host_os in ++ nonstopux*) version_type=nonstopux ;; ++ *) ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ version_type=linux ++ else ++ version_type=irix ++ fi ;; ++ esac ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' ++ case $host_os in ++ irix5* | nonstopux*) ++ libsuff= shlibsuff= ++ ;; ++ *) ++ case $LD in # libtool.m4 will add one of these switches to LD ++ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") ++ libsuff= shlibsuff= libmagic=32-bit;; ++ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") ++ libsuff=32 shlibsuff=N32 libmagic=N32;; ++ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") ++ libsuff=64 shlibsuff=64 libmagic=64-bit;; ++ *) libsuff= shlibsuff= libmagic=never-match;; ++ esac ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" ++ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" ++ hardcode_into_libs=yes ++ ;; ++ ++# No shared lib support for Linux oldld, aout, or coff. ++linux*oldld* | linux*aout* | linux*coff*) ++ dynamic_linker=no ++ ;; ++ ++# This must be Linux ELF. ++linux* | k*bsd*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ # Some binutils ld are patched to set DT_RUNPATH ++ save_LDFLAGS=$LDFLAGS ++ save_libdir=$libdir ++ eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ ++ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" ++ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], ++ [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], ++ [shlibpath_overrides_runpath=yes])]) ++ LDFLAGS=$save_LDFLAGS ++ libdir=$save_libdir ++ ++ # This implies no fast_install, which is unacceptable. ++ # Some rework will be needed to allow for fast_install ++ # before this can be enabled. ++ hardcode_into_libs=yes ++ ++ # Append ld.so.conf contents to the search path ++ if test -f /etc/ld.so.conf; then ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" ++ fi ++ ++ # We used to test for /lib/ld.so.1 and disable shared libraries on ++ # powerpc, because MkLinux only supported shared libraries with the ++ # GNU dynamic linker. Since this was broken with cross compilers, ++ # most powerpc-linux boxes support dynamic linking these days and ++ # people can always --disable-shared, the test was removed, and we ++ # assume the GNU/Linux dynamic linker is in use. ++ dynamic_linker='GNU/Linux ld.so' ++ ;; ++ ++netbsdelf*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='NetBSD ld.elf_so' ++ ;; ++ ++netbsd*) ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ dynamic_linker='NetBSD (a.out) ld.so' ++ else ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='NetBSD ld.elf_so' ++ fi ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ ++newsos6) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ ;; ++ ++*nto* | *qnx*) ++ version_type=qnx ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='ldqnx.so' ++ ;; ++ ++openbsd*) ++ version_type=sunos ++ sys_lib_dlsearch_path_spec="/usr/lib" ++ need_lib_prefix=no ++ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. ++ case $host_os in ++ openbsd3.3 | openbsd3.3.*) need_version=yes ;; ++ *) need_version=no ;; ++ esac ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ case $host_os in ++ openbsd2.[[89]] | openbsd2.[[89]].*) ++ shlibpath_overrides_runpath=no ++ ;; ++ *) ++ shlibpath_overrides_runpath=yes ++ ;; ++ esac ++ else ++ shlibpath_overrides_runpath=yes ++ fi ++ ;; ++ ++os2*) ++ libname_spec='$name' ++ shrext_cmds=".dll" ++ need_lib_prefix=no ++ library_names_spec='$libname${shared_ext} $libname.a' ++ dynamic_linker='OS/2 ld.exe' ++ shlibpath_var=LIBPATH ++ ;; ++ ++osf3* | osf4* | osf5*) ++ version_type=osf ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" ++ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ++ ;; ++ ++rdos*) ++ dynamic_linker=no ++ ;; ++ ++solaris*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ # ldd complains unless libraries are executable ++ postinstall_cmds='chmod +x $lib' ++ ;; ++ ++sunos4*) ++ version_type=sunos ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ if test "$with_gnu_ld" = yes; then ++ need_lib_prefix=no ++ fi ++ need_version=yes ++ ;; ++ ++sysv4 | sysv4.3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_vendor in ++ sni) ++ shlibpath_overrides_runpath=no ++ need_lib_prefix=no ++ runpath_var=LD_RUN_PATH ++ ;; ++ siemens) ++ need_lib_prefix=no ++ ;; ++ motorola) ++ need_lib_prefix=no ++ need_version=no ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ++ ;; ++ esac ++ ;; ++ ++sysv4*MP*) ++ if test -d /usr/nec ;then ++ version_type=linux ++ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' ++ soname_spec='$libname${shared_ext}.$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ fi ++ ;; ++ ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ version_type=freebsd-elf ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ if test "$with_gnu_ld" = yes; then ++ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' ++ else ++ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' ++ case $host_os in ++ sco3.2v5*) ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ++ ;; ++ esac ++ fi ++ sys_lib_dlsearch_path_spec='/usr/lib' ++ ;; ++ ++tpf*) ++ # TPF is a cross-target only. Preferred cross-host = GNU/Linux. ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_name_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ ++uts4*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; ++ ++*) ++ dynamic_linker=no ++ ;; ++esac ++AC_MSG_RESULT([$dynamic_linker]) ++test "$dynamic_linker" = no && can_build_shared=no ++ ++variables_saved_for_relink="PATH $shlibpath_var $runpath_var" ++if test "$GCC" = yes; then ++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" ++fi ++ ++if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then ++ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" ++fi ++if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then ++ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" ++fi ++ ++_LT_DECL([], [variables_saved_for_relink], [1], ++ [Variables whose values should be saved in libtool wrapper scripts and ++ restored at link time]) ++_LT_DECL([], [need_lib_prefix], [0], ++ [Do we need the "lib" prefix for modules?]) ++_LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) ++_LT_DECL([], [version_type], [0], [Library versioning type]) ++_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) ++_LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) ++_LT_DECL([], [shlibpath_overrides_runpath], [0], ++ [Is shlibpath searched before the hard-coded library search path?]) ++_LT_DECL([], [libname_spec], [1], [Format of library name prefix]) ++_LT_DECL([], [library_names_spec], [1], ++ [[List of archive names. First name is the real one, the rest are links. ++ The last name is the one that the linker finds with -lNAME]]) ++_LT_DECL([], [soname_spec], [1], ++ [[The coded name of the library, if different from the real name]]) ++_LT_DECL([], [postinstall_cmds], [2], ++ [Command to use after installation of a shared archive]) ++_LT_DECL([], [postuninstall_cmds], [2], ++ [Command to use after uninstallation of a shared archive]) ++_LT_DECL([], [finish_cmds], [2], ++ [Commands used to finish a libtool library installation in a directory]) ++_LT_DECL([], [finish_eval], [1], ++ [[As "finish_cmds", except a single script fragment to be evaled but ++ not shown]]) ++_LT_DECL([], [hardcode_into_libs], [0], ++ [Whether we should hardcode library paths into libraries]) ++_LT_DECL([], [sys_lib_search_path_spec], [2], ++ [Compile-time system search path for libraries]) ++_LT_DECL([], [sys_lib_dlsearch_path_spec], [2], ++ [Run-time system search path for libraries]) ++])# _LT_SYS_DYNAMIC_LINKER ++ ++ ++# _LT_PATH_TOOL_PREFIX(TOOL) ++# -------------------------- ++# find a file program which can recognize shared library ++AC_DEFUN([_LT_PATH_TOOL_PREFIX], ++[m4_require([_LT_DECL_EGREP])dnl ++AC_MSG_CHECKING([for $1]) ++AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, ++[case $MAGIC_CMD in ++[[\\/*] | ?:[\\/]*]) ++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ++ ;; ++*) ++ lt_save_MAGIC_CMD="$MAGIC_CMD" ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++dnl $ac_dummy forces splitting on constant user-supplied paths. ++dnl POSIX.2 word splitting is done only on the output of word expansions, ++dnl not every word. This closes a longstanding sh security hole. ++ ac_dummy="m4_if([$2], , $PATH, [$2])" ++ for ac_dir in $ac_dummy; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$1; then ++ lt_cv_path_MAGIC_CMD="$ac_dir/$1" ++ if test -n "$file_magic_test_file"; then ++ case $deplibs_check_method in ++ "file_magic "*) ++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` ++ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | ++ $EGREP "$file_magic_regex" > /dev/null; then ++ : ++ else ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: the command libtool uses to detect shared libraries, ++*** $file_magic_cmd, produces output that libtool cannot recognize. ++*** The result is that libtool may fail to recognize shared libraries ++*** as such. This will affect the creation of libtool libraries that ++*** depend on shared libraries, but programs linked with such libtool ++*** libraries will work regardless of this problem. Nevertheless, you ++*** may want to report the problem to your system manager and/or to ++*** bug-libtool@gnu.org ++ ++_LT_EOF ++ fi ;; ++ esac ++ fi ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" ++ MAGIC_CMD="$lt_save_MAGIC_CMD" ++ ;; ++esac]) ++MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++if test -n "$MAGIC_CMD"; then ++ AC_MSG_RESULT($MAGIC_CMD) ++else ++ AC_MSG_RESULT(no) ++fi ++_LT_DECL([], [MAGIC_CMD], [0], ++ [Used to examine libraries when file_magic_cmd begins with "file"])dnl ++])# _LT_PATH_TOOL_PREFIX ++ ++# Old name: ++AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) ++ ++ ++# _LT_PATH_MAGIC ++# -------------- ++# find a file program which can recognize a shared library ++m4_defun([_LT_PATH_MAGIC], ++[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) ++if test -z "$lt_cv_path_MAGIC_CMD"; then ++ if test -n "$ac_tool_prefix"; then ++ _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) ++ else ++ MAGIC_CMD=: ++ fi ++fi ++])# _LT_PATH_MAGIC ++ ++ ++# LT_PATH_LD ++# ---------- ++# find the pathname to the GNU or non-GNU linker ++AC_DEFUN([LT_PATH_LD], ++[AC_REQUIRE([AC_PROG_CC])dnl ++AC_REQUIRE([AC_CANONICAL_HOST])dnl ++AC_REQUIRE([AC_CANONICAL_BUILD])dnl ++m4_require([_LT_DECL_SED])dnl ++m4_require([_LT_DECL_EGREP])dnl ++ ++AC_ARG_WITH([gnu-ld], ++ [AS_HELP_STRING([--with-gnu-ld], ++ [assume the C compiler uses GNU ld @<:@default=no@:>@])], ++ [test "$withval" = no || with_gnu_ld=yes], ++ [with_gnu_ld=no])dnl ++ ++ac_prog=ld ++if test "$GCC" = yes; then ++ # Check if gcc -print-prog-name=ld gives a path. ++ AC_MSG_CHECKING([for ld used by $CC]) ++ case $host in ++ *-*-mingw*) ++ # gcc leaves a trailing carriage return which upsets mingw ++ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; ++ *) ++ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; ++ esac ++ case $ac_prog in ++ # Accept absolute paths. ++ [[\\/]]* | ?:[[\\/]]*) ++ re_direlt='/[[^/]][[^/]]*/\.\./' ++ # Canonicalize the pathname of ld ++ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` ++ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ++ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` ++ done ++ test -z "$LD" && LD="$ac_prog" ++ ;; ++ "") ++ # If it fails, then pretend we aren't using GCC. ++ ac_prog=ld ++ ;; ++ *) ++ # If it is relative, then search for the first ld in PATH. ++ with_gnu_ld=unknown ++ ;; ++ esac ++elif test "$with_gnu_ld" = yes; then ++ AC_MSG_CHECKING([for GNU ld]) ++else ++ AC_MSG_CHECKING([for non-GNU ld]) ++fi ++AC_CACHE_VAL(lt_cv_path_LD, ++[if test -z "$LD"; then ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then ++ lt_cv_path_LD="$ac_dir/$ac_prog" ++ # Check to see if the program is GNU ld. I'd rather use --version, ++ # but apparently some variants of GNU ld only accept -v. ++ # Break only if it was the GNU/non-GNU ld that we prefer. ++ case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null 2>&1; then ++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' ++ lt_cv_file_magic_cmd='func_win32_libid' ++ else ++ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' ++ lt_cv_file_magic_cmd='$OBJDUMP -f' ++ fi ++ ;; ++ ++darwin* | rhapsody*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++freebsd* | dragonfly*) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then ++ case $host_cpu in ++ i*86 ) ++ # Not sure whether the presence of OpenBSD here was a mistake. ++ # Let's accept both of them until this is cleared up. ++ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' ++ lt_cv_file_magic_cmd=/usr/bin/file ++ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ++ ;; ++ esac ++ else ++ lt_cv_deplibs_check_method=pass_all ++ fi ++ ;; ++ ++gnu*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++hpux10.20* | hpux11*) ++ lt_cv_file_magic_cmd=/usr/bin/file ++ case $host_cpu in ++ ia64*) ++ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' ++ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ++ ;; ++ hppa*64*) ++ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] ++ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ++ ;; ++ *) ++ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' ++ lt_cv_file_magic_test_file=/usr/lib/libc.sl ++ ;; ++ esac ++ ;; ++ ++interix[[3-9]]*) ++ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' ++ ;; ++ ++irix5* | irix6* | nonstopux*) ++ case $LD in ++ *-32|*"-32 ") libmagic=32-bit;; ++ *-n32|*"-n32 ") libmagic=N32;; ++ *-64|*"-64 ") libmagic=64-bit;; ++ *) libmagic=never-match;; ++ esac ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++# This must be Linux ELF. ++linux* | k*bsd*-gnu) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' ++ else ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' ++ fi ++ ;; ++ ++newos6*) ++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' ++ lt_cv_file_magic_cmd=/usr/bin/file ++ lt_cv_file_magic_test_file=/usr/lib/libnls.so ++ ;; ++ ++*nto* | *qnx*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++openbsd*) ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' ++ else ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' ++ fi ++ ;; ++ ++osf3* | osf4* | osf5*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++rdos*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++solaris*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++sysv4 | sysv4.3*) ++ case $host_vendor in ++ motorola) ++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' ++ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ++ ;; ++ ncr) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ sequent) ++ lt_cv_file_magic_cmd='/bin/file' ++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ++ ;; ++ sni) ++ lt_cv_file_magic_cmd='/bin/file' ++ lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" ++ lt_cv_file_magic_test_file=/lib/libc.so ++ ;; ++ siemens) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ pc) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ esac ++ ;; ++ ++tpf*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++esac ++]) ++file_magic_cmd=$lt_cv_file_magic_cmd ++deplibs_check_method=$lt_cv_deplibs_check_method ++test -z "$deplibs_check_method" && deplibs_check_method=unknown ++ ++_LT_DECL([], [deplibs_check_method], [1], ++ [Method to check whether dependent libraries are shared objects]) ++_LT_DECL([], [file_magic_cmd], [1], ++ [Command to use when deplibs_check_method == "file_magic"]) ++])# _LT_CHECK_MAGIC_METHOD ++ ++ ++# LT_PATH_NM ++# ---------- ++# find the pathname to a BSD- or MS-compatible name lister ++AC_DEFUN([LT_PATH_NM], ++[AC_REQUIRE([AC_PROG_CC])dnl ++AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, ++[if test -n "$NM"; then ++ # Let the user override the test. ++ lt_cv_path_NM="$NM" ++else ++ lt_nm_to_check="${ac_tool_prefix}nm" ++ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then ++ lt_nm_to_check="$lt_nm_to_check nm" ++ fi ++ for lt_tmp_nm in $lt_nm_to_check; do ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ tmp_nm="$ac_dir/$lt_tmp_nm" ++ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then ++ # Check to see if the nm accepts a BSD-compat flag. ++ # Adding the `sed 1q' prevents false positives on HP-UX, which says: ++ # nm: unknown option "B" ignored ++ # Tru64's nm complains that /dev/null is an invalid object file ++ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in ++ */dev/null* | *'Invalid file or object type'*) ++ lt_cv_path_NM="$tmp_nm -B" ++ break ++ ;; ++ *) ++ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in ++ */dev/null*) ++ lt_cv_path_NM="$tmp_nm -p" ++ break ++ ;; ++ *) ++ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but ++ continue # so that we can try to find one that supports BSD flags ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ done ++ IFS="$lt_save_ifs" ++ done ++ : ${lt_cv_path_NM=no} ++fi]) ++if test "$lt_cv_path_NM" != "no"; then ++ NM="$lt_cv_path_NM" ++else ++ # Didn't find any BSD compatible name lister, look for dumpbin. ++ AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :) ++ AC_SUBST([DUMPBIN]) ++ if test "$DUMPBIN" != ":"; then ++ NM="$DUMPBIN" ++ fi ++fi ++test -z "$NM" && NM=nm ++AC_SUBST([NM]) ++_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl ++ ++AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], ++ [lt_cv_nm_interface="BSD nm" ++ echo "int some_variable = 0;" > conftest.$ac_ext ++ (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD) ++ (eval "$ac_compile" 2>conftest.err) ++ cat conftest.err >&AS_MESSAGE_LOG_FD ++ (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) ++ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) ++ cat conftest.err >&AS_MESSAGE_LOG_FD ++ (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD) ++ cat conftest.out >&AS_MESSAGE_LOG_FD ++ if $GREP 'External.*some_variable' conftest.out > /dev/null; then ++ lt_cv_nm_interface="MS dumpbin" ++ fi ++ rm -f conftest*]) ++])# LT_PATH_NM ++ ++# Old names: ++AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) ++AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AM_PROG_NM], []) ++dnl AC_DEFUN([AC_PROG_NM], []) ++ ++ ++# LT_LIB_M ++# -------- ++# check for math library ++AC_DEFUN([LT_LIB_M], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl ++LIBM= ++case $host in ++*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) ++ # These system don't have libm, or don't need it ++ ;; ++*-ncr-sysv4.3*) ++ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") ++ AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") ++ ;; ++*) ++ AC_CHECK_LIB(m, cos, LIBM="-lm") ++ ;; ++esac ++AC_SUBST([LIBM]) ++])# LT_LIB_M ++ ++# Old name: ++AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_CHECK_LIBM], []) ++ ++ ++# _LT_COMPILER_NO_RTTI([TAGNAME]) ++# ------------------------------- ++m4_defun([_LT_COMPILER_NO_RTTI], ++[m4_require([_LT_TAG_COMPILER])dnl ++ ++_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= ++ ++if test "$GCC" = yes; then ++ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ++ ++ _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], ++ lt_cv_prog_compiler_rtti_exceptions, ++ [-fno-rtti -fno-exceptions], [], ++ [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) ++fi ++_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], ++ [Compiler flag to turn off builtin functions]) ++])# _LT_COMPILER_NO_RTTI ++ ++ ++# _LT_CMD_GLOBAL_SYMBOLS ++# ---------------------- ++m4_defun([_LT_CMD_GLOBAL_SYMBOLS], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl ++AC_REQUIRE([AC_PROG_CC])dnl ++AC_REQUIRE([LT_PATH_NM])dnl ++AC_REQUIRE([LT_PATH_LD])dnl ++m4_require([_LT_DECL_SED])dnl ++m4_require([_LT_DECL_EGREP])dnl ++m4_require([_LT_TAG_COMPILER])dnl ++ ++# Check for command to grab the raw symbol name followed by C symbol from nm. ++AC_MSG_CHECKING([command to parse $NM output from $compiler object]) ++AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], ++[ ++# These are sane defaults that work on at least a few old systems. ++# [They come from Ultrix. What could be older than Ultrix?!! ;)] ++ ++# Character class describing NM global symbol codes. ++symcode='[[BCDEGRST]]' ++ ++# Regexp to match symbols that can be accessed directly from C. ++sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' ++ ++# Define system-specific variables. ++case $host_os in ++aix*) ++ symcode='[[BCDT]]' ++ ;; ++cygwin* | mingw* | pw32*) ++ symcode='[[ABCDGISTW]]' ++ ;; ++hpux*) ++ if test "$host_cpu" = ia64; then ++ symcode='[[ABCDEGRST]]' ++ fi ++ ;; ++irix* | nonstopux*) ++ symcode='[[BCDEGRST]]' ++ ;; ++osf*) ++ symcode='[[BCDEGQRST]]' ++ ;; ++solaris*) ++ symcode='[[BDRT]]' ++ ;; ++sco3.2v5*) ++ symcode='[[DT]]' ++ ;; ++sysv4.2uw2*) ++ symcode='[[DT]]' ++ ;; ++sysv5* | sco5v6* | unixware* | OpenUNIX*) ++ symcode='[[ABDT]]' ++ ;; ++sysv4) ++ symcode='[[DFNSTU]]' ++ ;; ++esac ++ ++# If we're using GNU nm, then use its standard symbol codes. ++case `$NM -V 2>&1` in ++*GNU* | *'with BFD'*) ++ symcode='[[ABCDGIRSTW]]' ;; ++esac ++ ++# Transform an extracted symbol line into a proper C declaration. ++# Some systems (esp. on ia64) link data and code symbols differently, ++# so use this general approach. ++lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" ++ ++# Transform an extracted symbol line into symbol name and symbol address ++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" ++ ++# Handle CRLF in mingw tool chain ++opt_cr= ++case $build_os in ++mingw*) ++ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ++ ;; ++esac ++ ++# Try without a prefix underscore, then with it. ++for ac_symprfx in "" "_"; do ++ ++ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. ++ symxfrm="\\1 $ac_symprfx\\2 \\2" ++ ++ # Write the raw and C identifiers. ++ if test "$lt_cv_nm_interface" = "MS dumpbin"; then ++ # Fake it for dumpbin and say T for any non-static function ++ # and D for any global variable. ++ # Also find C++ and __fastcall symbols from MSVC++, ++ # which start with @ or ?. ++ lt_cv_sys_global_symbol_pipe="$AWK ['"\ ++" {last_section=section; section=\$ 3};"\ ++" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ ++" \$ 0!~/External *\|/{next};"\ ++" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ ++" {if(hide[section]) next};"\ ++" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ ++" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ ++" s[1]~/^[@?]/{print s[1], s[1]; next};"\ ++" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ ++" ' prfx=^$ac_symprfx]" ++ else ++ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" ++ fi ++ ++ # Check to see that the pipe works correctly. ++ pipe_works=no ++ ++ rm -f conftest* ++ cat > conftest.$ac_ext <<_LT_EOF ++#ifdef __cplusplus ++extern "C" { ++#endif ++char nm_test_var; ++void nm_test_func(void); ++void nm_test_func(void){} ++#ifdef __cplusplus ++} ++#endif ++int main(){nm_test_var='a';nm_test_func();return(0);} ++_LT_EOF ++ ++ if AC_TRY_EVAL(ac_compile); then ++ # Now try to grab the symbols. ++ nlist=conftest.nm ++ if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then ++ # Try sorting and uniquifying the output. ++ if sort "$nlist" | uniq > "$nlist"T; then ++ mv -f "$nlist"T "$nlist" ++ else ++ rm -f "$nlist"T ++ fi ++ ++ # Make sure that we snagged all the symbols we need. ++ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then ++ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then ++ cat <<_LT_EOF > conftest.$ac_ext ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++_LT_EOF ++ # Now generate the symbol file. ++ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' ++ ++ cat <<_LT_EOF >> conftest.$ac_ext ++ ++/* The mapping between symbol names and symbols. */ ++const struct { ++ const char *name; ++ void *address; ++} ++lt__PROGRAM__LTX_preloaded_symbols[[]] = ++{ ++ { "@PROGRAM@", (void *) 0 }, ++_LT_EOF ++ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext ++ cat <<\_LT_EOF >> conftest.$ac_ext ++ {0, (void *) 0} ++}; ++ ++/* This works around a problem in FreeBSD linker */ ++#ifdef FREEBSD_WORKAROUND ++static const void *lt_preloaded_setup() { ++ return lt__PROGRAM__LTX_preloaded_symbols; ++} ++#endif ++ ++#ifdef __cplusplus ++} ++#endif ++_LT_EOF ++ # Now try linking the two files. ++ mv conftest.$ac_objext conftstm.$ac_objext ++ lt_save_LIBS="$LIBS" ++ lt_save_CFLAGS="$CFLAGS" ++ LIBS="conftstm.$ac_objext" ++ CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" ++ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then ++ pipe_works=yes ++ fi ++ LIBS="$lt_save_LIBS" ++ CFLAGS="$lt_save_CFLAGS" ++ else ++ echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD ++ fi ++ else ++ echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD ++ fi ++ else ++ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD ++ fi ++ else ++ echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD ++ cat conftest.$ac_ext >&5 ++ fi ++ rm -rf conftest* conftst* ++ ++ # Do not use the global_symbol_pipe unless it works. ++ if test "$pipe_works" = yes; then ++ break ++ else ++ lt_cv_sys_global_symbol_pipe= ++ fi ++done ++]) ++if test -z "$lt_cv_sys_global_symbol_pipe"; then ++ lt_cv_sys_global_symbol_to_cdecl= ++fi ++if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then ++ AC_MSG_RESULT(failed) ++else ++ AC_MSG_RESULT(ok) ++fi ++ ++_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], ++ [Take the output of nm and produce a listing of raw symbols and C names]) ++_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], ++ [Transform the output of nm in a proper C declaration]) ++_LT_DECL([global_symbol_to_c_name_address], ++ [lt_cv_sys_global_symbol_to_c_name_address], [1], ++ [Transform the output of nm in a C name address pair]) ++_LT_DECL([global_symbol_to_c_name_address_lib_prefix], ++ [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], ++ [Transform the output of nm in a C name address pair when lib prefix is needed]) ++]) # _LT_CMD_GLOBAL_SYMBOLS ++ ++ ++# _LT_COMPILER_PIC([TAGNAME]) ++# --------------------------- ++m4_defun([_LT_COMPILER_PIC], ++[m4_require([_LT_TAG_COMPILER])dnl ++_LT_TAGVAR(lt_prog_compiler_wl, $1)= ++_LT_TAGVAR(lt_prog_compiler_pic, $1)= ++_LT_TAGVAR(lt_prog_compiler_static, $1)= ++ ++AC_MSG_CHECKING([for $compiler option to produce PIC]) ++m4_if([$1], [CXX], [ ++ # C++ specific cases for pic, static, wl, etc. ++ if test "$GXX" = yes; then ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ++ ++ case $host_os in ++ aix*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ fi ++ ;; ++ ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ m68k) ++ # FIXME: we need at least 68020 code to build shared libraries, but ++ # adding the `-m68020' flag to GCC prevents building anything better, ++ # like `-m68040'. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ++ ;; ++ esac ++ ;; ++ ++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ # PIC is the default for these OSes. ++ ;; ++ mingw* | cygwin* | os2* | pw32*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ # Although the cygwin gcc ignores -fPIC, still need this for old-style ++ # (--disable-auto-import) libraries ++ m4_if([$1], [GCJ], [], ++ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ++ ;; ++ darwin* | rhapsody*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ++ ;; ++ *djgpp*) ++ # DJGPP does not support shared libraries at all ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)= ++ ;; ++ interix[[3-9]]*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic ++ fi ++ ;; ++ hpux*) ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ ;; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ esac ++ ;; ++ *qnx* | *nto*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ++ ;; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ esac ++ else ++ case $host_os in ++ aix[[4-9]]*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ else ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' ++ fi ++ ;; ++ chorus*) ++ case $cc_basename in ++ cxch68*) ++ # Green Hills C++ Compiler ++ # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ++ ;; ++ esac ++ ;; ++ dgux*) ++ case $cc_basename in ++ ec++*) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ ;; ++ ghcx*) ++ # Green Hills C++ Compiler ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ freebsd* | dragonfly*) ++ # FreeBSD uses GNU C++ ++ ;; ++ hpux9* | hpux10* | hpux11*) ++ case $cc_basename in ++ CC*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ++ if test "$host_cpu" != ia64; then ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ++ fi ++ ;; ++ aCC*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ++ ;; ++ esac ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ interix*) ++ # This is c89, which is MS Visual C++ (no shared libs) ++ # Anyone wants to do a port? ++ ;; ++ irix5* | irix6* | nonstopux*) ++ case $cc_basename in ++ CC*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ # CC pic flag -KPIC is the default. ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ linux* | k*bsd*-gnu) ++ case $cc_basename in ++ KCC*) ++ # KAI C++ Compiler ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ icpc* | ecpc* ) ++ # Intel C++ ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ++ ;; ++ pgCC* | pgcpp*) ++ # Portland Group C++ compiler ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ cxx*) ++ # Compaq C++ ++ # Make sure the PIC flag is empty. It appears that all Alpha ++ # Linux and Compaq Tru64 Unix objects are PIC. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)= ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ xlc* | xlC*) ++ # IBM XL 8.0 on PPC ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ++ ;; ++ *) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C++ 5.9 ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ++ ;; ++ esac ++ ;; ++ esac ++ ;; ++ lynxos*) ++ ;; ++ m88k*) ++ ;; ++ mvs*) ++ case $cc_basename in ++ cxx*) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ netbsd* | netbsdelf*-gnu) ++ ;; ++ *qnx* | *nto*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ++ ;; ++ osf3* | osf4* | osf5*) ++ case $cc_basename in ++ KCC*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' ++ ;; ++ RCC*) ++ # Rational C++ 2.4.1 ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ ;; ++ cxx*) ++ # Digital/Compaq C++ ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # Make sure the PIC flag is empty. It appears that all Alpha ++ # Linux and Compaq Tru64 Unix objects are PIC. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)= ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ psos*) ++ ;; ++ solaris*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.2, 5.x and Centerline C++ ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ++ ;; ++ gcx*) ++ # Green Hills C++ Compiler ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ sunos4*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.x ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ lcc*) ++ # Lucid ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ case $cc_basename in ++ CC*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ esac ++ ;; ++ tandem*) ++ case $cc_basename in ++ NCC*) ++ # NonStop-UX NCC 3.20 ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ vxworks*) ++ ;; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ++ ;; ++ esac ++ fi ++], ++[ ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ++ ++ case $host_os in ++ aix*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ fi ++ ;; ++ ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ m68k) ++ # FIXME: we need at least 68020 code to build shared libraries, but ++ # adding the `-m68020' flag to GCC prevents building anything better, ++ # like `-m68040'. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ++ ;; ++ esac ++ ;; ++ ++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ # PIC is the default for these OSes. ++ ;; ++ ++ mingw* | cygwin* | pw32* | os2*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ # Although the cygwin gcc ignores -fPIC, still need this for old-style ++ # (--disable-auto-import) libraries ++ m4_if([$1], [GCJ], [], ++ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ++ ;; ++ ++ darwin* | rhapsody*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ++ ;; ++ ++ hpux*) ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ esac ++ ;; ++ ++ interix[[3-9]]*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; ++ ++ msdosdjgpp*) ++ # Just because we use GCC doesn't mean we suddenly get shared libraries ++ # on systems that don't support them. ++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ++ enable_shared=no ++ ;; ++ ++ *nto* | *qnx*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic ++ fi ++ ;; ++ ++ *) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ esac ++ else ++ # PORTME Check for flag to pass linker flags through the system compiler. ++ case $host_os in ++ aix*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ else ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' ++ fi ++ ;; ++ ++ mingw* | cygwin* | pw32* | os2*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ m4_if([$1], [GCJ], [], ++ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ++ ;; ++ ++ hpux9* | hpux10* | hpux11*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ++ ;; ++ esac ++ # Is there a better lt_prog_compiler_static that works with the bundled CC? ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ++ ;; ++ ++ irix5* | irix6* | nonstopux*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # PIC (with -KPIC) is the default. ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ ++ linux* | k*bsd*-gnu) ++ case $cc_basename in ++ icc* | ecc* | ifort*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ++ ;; ++ pgcc* | pgf77* | pgf90* | pgf95*) ++ # Portland Group compilers (*not* the Pentium gcc compiler, ++ # which looks to be a dead project) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ ccc*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # All Alpha code is PIC. ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ xl*) ++ # IBM XL C 8.0/Fortran 10.1 on PPC ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ++ ;; ++ *) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C 5.9 ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ ;; ++ *Sun\ F*) ++ # Sun Fortran 8.3 passes all unrecognized flags to the linker ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='' ++ ;; ++ esac ++ ;; ++ esac ++ ;; ++ ++ newsos6) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ ++ *nto* | *qnx*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ++ ;; ++ ++ osf3* | osf4* | osf5*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # All OSF/1 code is PIC. ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ ++ rdos*) ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ ++ solaris*) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ case $cc_basename in ++ f77* | f90* | f95*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; ++ esac ++ ;; ++ ++ sunos4*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ ++ sysv4 | sysv4.2uw2* | sysv4.3*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec ;then ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ fi ++ ;; ++ ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ ++ unicos*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ++ ;; ++ ++ uts4*) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ ++ *) ++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ++ ;; ++ esac ++ fi ++]) ++case $host_os in ++ # For platforms which do not support PIC, -DPIC is meaningless: ++ *djgpp*) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)= ++ ;; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" ++ ;; ++esac ++AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) ++_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], ++ [How to pass a linker flag through the compiler]) ++ ++# ++# Check to make sure the PIC flag actually works. ++# ++if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then ++ _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], ++ [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], ++ [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], ++ [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in ++ "" | " "*) ;; ++ *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; ++ esac], ++ [_LT_TAGVAR(lt_prog_compiler_pic, $1)= ++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) ++fi ++_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], ++ [Additional compiler flags for building library objects]) ++ ++# ++# Check to make sure the static flag actually works. ++# ++wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" ++_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], ++ _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), ++ $lt_tmp_static_flag, ++ [], ++ [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) ++_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], ++ [Compiler flag to prevent dynamic linking]) ++])# _LT_COMPILER_PIC ++ ++ ++# _LT_LINKER_SHLIBS([TAGNAME]) ++# ---------------------------- ++# See if the linker supports building shared libraries. ++m4_defun([_LT_LINKER_SHLIBS], ++[AC_REQUIRE([LT_PATH_LD])dnl ++AC_REQUIRE([LT_PATH_NM])dnl ++m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_DECL_EGREP])dnl ++m4_require([_LT_DECL_SED])dnl ++m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl ++m4_require([_LT_TAG_COMPILER])dnl ++AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) ++m4_if([$1], [CXX], [ ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ case $host_os in ++ aix[[4-9]]*) ++ # If we're using GNU nm, then we don't want the "-C" option. ++ # -C means demangle to AIX nm, but means don't demangle with GNU nm ++ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ else ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ fi ++ ;; ++ pw32*) ++ _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" ++ ;; ++ cygwin* | mingw*) ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' ++ ;; ++ linux* | k*bsd*-gnu) ++ _LT_TAGVAR(link_all_deplibs, $1)=no ++ ;; ++ *) ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ ;; ++ esac ++ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] ++], [ ++ runpath_var= ++ _LT_TAGVAR(allow_undefined_flag, $1)= ++ _LT_TAGVAR(always_export_symbols, $1)=no ++ _LT_TAGVAR(archive_cmds, $1)= ++ _LT_TAGVAR(archive_expsym_cmds, $1)= ++ _LT_TAGVAR(compiler_needs_object, $1)=no ++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)= ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ _LT_TAGVAR(hardcode_automatic, $1)=no ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= ++ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= ++ _LT_TAGVAR(hardcode_libdir_separator, $1)= ++ _LT_TAGVAR(hardcode_minus_L, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported ++ _LT_TAGVAR(inherit_rpath, $1)=no ++ _LT_TAGVAR(link_all_deplibs, $1)=unknown ++ _LT_TAGVAR(module_cmds, $1)= ++ _LT_TAGVAR(module_expsym_cmds, $1)= ++ _LT_TAGVAR(old_archive_from_new_cmds, $1)= ++ _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= ++ _LT_TAGVAR(thread_safe_flag_spec, $1)= ++ _LT_TAGVAR(whole_archive_flag_spec, $1)= ++ # include_expsyms should be a list of space-separated symbols to be *always* ++ # included in the symbol list ++ _LT_TAGVAR(include_expsyms, $1)= ++ # exclude_expsyms can be an extended regexp of symbols to exclude ++ # it will be wrapped by ` (' and `)$', so one must not match beginning or ++ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', ++ # as well as any symbol that contains `d'. ++ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] ++ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out ++ # platforms (ab)use it in PIC code, but their linkers get confused if ++ # the symbol is explicitly referenced. Since portable code cannot ++ # rely on this symbol name, it's probably fine to never include it in ++ # preloaded symbol tables. ++ # Exclude shared library initialization/finalization symbols. ++dnl Note also adjust exclude_expsyms for C++ above. ++ extract_expsyms_cmds= ++ ++ case $host_os in ++ cygwin* | mingw* | pw32*) ++ # FIXME: the MSVC++ port hasn't been tested in a loooong time ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ if test "$GCC" != yes; then ++ with_gnu_ld=no ++ fi ++ ;; ++ interix*) ++ # we just hope/assume this is gcc and not c89 (= MSVC++) ++ with_gnu_ld=yes ++ ;; ++ openbsd*) ++ with_gnu_ld=no ++ ;; ++ esac ++ ++ _LT_TAGVAR(ld_shlibs, $1)=yes ++ if test "$with_gnu_ld" = yes; then ++ # If archive_cmds runs LD, not CC, wlarc should be empty ++ wlarc='${wl}' ++ ++ # Set some defaults for GNU ld with shared library support. These ++ # are reset later if shared libraries are not supported. Putting them ++ # here allows them to be overridden if necessary. ++ runpath_var=LD_RUN_PATH ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then ++ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ _LT_TAGVAR(whole_archive_flag_spec, $1)= ++ fi ++ supports_anon_versioning=no ++ case `$LD -v 2>&1` in ++ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 ++ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... ++ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... ++ *\ 2.11.*) ;; # other 2.11 versions ++ *) supports_anon_versioning=yes ;; ++ esac ++ ++ # See if GNU ld supports shared libraries. ++ case $host_os in ++ aix[[3-9]]*) ++ # On AIX/PPC, the GNU linker is very broken ++ if test "$host_cpu" != ia64; then ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: the GNU linker, at least up to release 2.9.1, is reported ++*** to be unable to reliably create shared libraries on AIX. ++*** Therefore, libtool is disabling shared libraries support. If you ++*** really care for shared libraries, you may want to modify your PATH ++*** so that a non-GNU linker is found, and then restart. ++ ++_LT_EOF ++ fi ++ ;; ++ ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='' ++ ;; ++ m68k) ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ ;; ++ esac ++ ;; ++ ++ beos*) ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ ++ cygwin* | mingw* | pw32*) ++ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, ++ # as there is no search path for DLLs. ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ _LT_TAGVAR(always_export_symbols, $1)=no ++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' ++ ++ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ # If the export-symbols file already is a .def file (1st line ++ # is EXPORTS), use it as is; otherwise, prepend... ++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ cp $export_symbols $output_objdir/$soname.def; ++ else ++ echo EXPORTS > $output_objdir/$soname.def; ++ cat $export_symbols >> $output_objdir/$soname.def; ++ fi~ ++ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ ++ interix[[3-9]]*) ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; ++ ++ gnu* | linux* | tpf* | k*bsd*-gnu) ++ tmp_diet=no ++ if test "$host_os" = linux-dietlibc; then ++ case $cc_basename in ++ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) ++ esac ++ fi ++ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ ++ && test "$tmp_diet" = no ++ then ++ tmp_addflag= ++ tmp_sharedflag='-shared' ++ case $cc_basename,$host_cpu in ++ pgcc*) # Portland Group C compiler ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag' ++ ;; ++ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag -Mnomain' ;; ++ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 ++ tmp_addflag=' -i_dynamic' ;; ++ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 ++ tmp_addflag=' -i_dynamic -nofor_main' ;; ++ ifc* | ifort*) # Intel Fortran compiler ++ tmp_addflag=' -nofor_main' ;; ++ xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) ++ tmp_sharedflag='-qmkshrobj' ++ tmp_addflag= ;; ++ esac ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) # Sun C 5.9 ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ _LT_TAGVAR(compiler_needs_object, $1)=yes ++ tmp_sharedflag='-G' ;; ++ *Sun\ F*) # Sun Fortran 8.3 ++ tmp_sharedflag='-G' ;; ++ esac ++ _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ ++ if test "x$supports_anon_versioning" = xyes; then ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' ++ fi ++ ++ case $cc_basename in ++ xlf*) ++ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= ++ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' ++ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' ++ if test "x$supports_anon_versioning" = xyes; then ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' ++ fi ++ ;; ++ esac ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' ++ wlarc= ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ fi ++ ;; ++ ++ solaris*) ++ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: The releases 2.8.* of the GNU linker cannot reliably ++*** create shared libraries on Solaris systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.9.1 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. ++ ++_LT_EOF ++ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ ++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) ++ case `$LD -v 2>&1` in ++ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not ++*** reliably create shared libraries on SCO systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.16.91.0.3 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. ++ ++_LT_EOF ++ ;; ++ *) ++ # For security reasons, it is highly recommended that you always ++ # use absolute paths for naming shared libraries, and exclude the ++ # DT_RUNPATH tag from executables and libraries. But doing so ++ # requires that you compile everything twice, which is a pain. ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ;; ++ ++ sunos4*) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ wlarc= ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ ++ *) ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ++ if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then ++ runpath_var= ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)= ++ _LT_TAGVAR(whole_archive_flag_spec, $1)= ++ fi ++ else ++ # PORTME fill in a description of your system's linker (not GNU ld) ++ case $host_os in ++ aix3*) ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ _LT_TAGVAR(always_export_symbols, $1)=yes ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' ++ # Note: this linker hardcodes the directories in LIBPATH if there ++ # are no directories specified by -L. ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then ++ # Neither direct hardcoding nor static linking is supported with a ++ # broken collect2. ++ _LT_TAGVAR(hardcode_direct, $1)=unsupported ++ fi ++ ;; ++ ++ aix[[4-9]]*) ++ if test "$host_cpu" = ia64; then ++ # On IA64, the linker does run time linking by default, so we don't ++ # have to do anything special. ++ aix_use_runtimelinking=no ++ exp_sym_flag='-Bexport' ++ no_entry_flag="" ++ else ++ # If we're using GNU nm, then we don't want the "-C" option. ++ # -C means demangle to AIX nm, but means don't demangle with GNU nm ++ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ else ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ fi ++ aix_use_runtimelinking=no ++ ++ # Test if we are trying to use run time linking or normal ++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we ++ # need to do runtime linking. ++ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) ++ for ld_flag in $LDFLAGS; do ++ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then ++ aix_use_runtimelinking=yes ++ break ++ fi ++ done ++ ;; ++ esac ++ ++ exp_sym_flag='-bexport' ++ no_entry_flag='-bnoentry' ++ fi ++ ++ # When large executables or shared objects are built, AIX ld can ++ # have problems creating the table of contents. If linking a library ++ # or program results in "error TOC overflow" add -mminimal-toc to ++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not ++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. ++ ++ _LT_TAGVAR(archive_cmds, $1)='' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=':' ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' ++ ++ if test "$GCC" = yes; then ++ case $host_os in aix4.[[012]]|aix4.[[012]].*) ++ # We only want to do this on AIX 4.2 and lower, the check ++ # below for broken collect2 doesn't work under 4.3+ ++ collect2name=`${CC} -print-prog-name=collect2` ++ if test -f "$collect2name" && ++ strings "$collect2name" | $GREP resolve_lib_name >/dev/null ++ then ++ # We have reworked collect2 ++ : ++ else ++ # We have old collect2 ++ _LT_TAGVAR(hardcode_direct, $1)=unsupported ++ # It fails to find uninstalled libraries when the uninstalled ++ # path is not listed in the libpath. Setting hardcode_minus_L ++ # to unsupported forces relinking ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)= ++ fi ++ ;; ++ esac ++ shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi ++ _LT_TAGVAR(link_all_deplibs, $1)=no ++ else ++ # not using gcc ++ if test "$host_cpu" = ia64; then ++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release ++ # chokes on -Wl,-G. The following line is correct: ++ shared_flag='-G' ++ else ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag='${wl}-G' ++ else ++ shared_flag='${wl}-bM:SRE' ++ fi ++ fi ++ fi ++ ++ # It seems that -bexpall does not export symbols beginning with ++ # underscore (_), so it is better to generate a list of symbols to export. ++ _LT_TAGVAR(always_export_symbols, $1)=yes ++ if test "$aix_use_runtimelinking" = yes; then ++ # Warning - without using the other runtime loading flags (-brtl), ++ # -berok will link without error, but may produce a broken library. ++ _LT_TAGVAR(allow_undefined_flag, $1)='-berok' ++ # Determine the default libpath from the value encoded in an ++ # empty executable. ++ _LT_SYS_MODULE_PATH_AIX ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ else ++ if test "$host_cpu" = ia64; then ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' ++ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" ++ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" ++ else ++ # Determine the default libpath from the value encoded in an ++ # empty executable. ++ _LT_SYS_MODULE_PATH_AIX ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" ++ # Warning - without using the other run time loading flags, ++ # -berok will link without error, but may produce a broken library. ++ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' ++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' ++ # Exported symbols can be pulled into shared objects from archives ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes ++ # This is similar to how AIX traditionally builds its shared libraries. ++ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ fi ++ fi ++ ;; ++ ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='' ++ ;; ++ m68k) ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ ;; ++ esac ++ ;; ++ ++ bsdi[[45]]*) ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic ++ ;; ++ ++ cygwin* | mingw* | pw32*) ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ # hardcode_libdir_flag_spec is actually meaningless, as there is ++ # no search path for DLLs. ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' ++ # The linker will automatically build a .lib file if we build a DLL. ++ _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' ++ # FIXME: Should let the user specify the lib program. ++ _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' ++ _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' ++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ++ ;; ++ ++ darwin* | rhapsody*) ++ _LT_DARWIN_LINKER_FEATURES($1) ++ ;; ++ ++ dgux*) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ ++ freebsd1*) ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ ++ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor ++ # support. Future versions do this automatically, but an explicit c++rt0.o ++ # does not break anything, and helps significantly (at the cost of a little ++ # extra space). ++ freebsd2.2*) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ ++ # Unfortunately, older versions of FreeBSD 2 do not have this feature. ++ freebsd2*) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ ++ # FreeBSD 3 and greater uses gcc -shared to do shared libraries. ++ freebsd* | dragonfly*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ ++ hpux9*) ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ fi ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ ;; ++ ++ hpux10*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ if test "$with_gnu_ld" = no; then ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ fi ++ ;; ++ ++ hpux11*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ case $host_cpu in ++ hppa*64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ else ++ case $host_cpu in ++ hppa*64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ fi ++ if test "$with_gnu_ld" = no; then ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ case $host_cpu in ++ hppa*64*|ia64*) ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ *) ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ ;; ++ esac ++ fi ++ ;; ++ ++ irix5* | irix6* | nonstopux*) ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ # Try to use the -exported_symbol ld option, if it does not ++ # work, assume that -exports_file does not work either and ++ # implicitly export all symbols. ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" ++ AC_LINK_IFELSE(int foo(void) {}, ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' ++ ) ++ LDFLAGS="$save_LDFLAGS" ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' ++ fi ++ _LT_TAGVAR(archive_cmds_need_lc, $1)='no' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_TAGVAR(inherit_rpath, $1)=yes ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ ;; ++ ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF ++ fi ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ ++ newsos6) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ ++ *nto* | *qnx*) ++ ;; ++ ++ openbsd*) ++ if test -f /usr/libexec/ld.so; then ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ else ++ case $host_os in ++ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ ;; ++ esac ++ fi ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ ++ os2*) ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' ++ _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ++ ;; ++ ++ osf3*) ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ fi ++ _LT_TAGVAR(archive_cmds_need_lc, $1)='no' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ ;; ++ ++ osf4* | osf5*) # as osf3* with the addition of -msym flag ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ else ++ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ ++ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' ++ ++ # Both c and cxx compiler support -rpath directly ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ++ fi ++ _LT_TAGVAR(archive_cmds_need_lc, $1)='no' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ ;; ++ ++ solaris*) ++ _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' ++ if test "$GCC" = yes; then ++ wlarc='${wl}' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ++ else ++ case `$CC -V 2>&1` in ++ *"Compilers 5.0"*) ++ wlarc='' ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ++ ;; ++ *) ++ wlarc='${wl}' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ++ ;; ++ esac ++ fi ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ case $host_os in ++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; ++ *) ++ # The compiler driver will combine and reorder linker options, ++ # but understands `-z linker_flag'. GCC discards it without `$wl', ++ # but is careful enough not to reorder. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ++ else ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ++ fi ++ ;; ++ esac ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ ;; ++ ++ sunos4*) ++ if test "x$host_vendor" = xsequent; then ++ # Use $CC to link under sequent, because it throws in some extra .o ++ # files that make .init and .fini sections work. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ ++ sysv4) ++ case $host_vendor in ++ sni) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? ++ ;; ++ siemens) ++ ## LD is ld it makes a PLAMLIB ++ ## CC just makes a GrossModule. ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ ;; ++ motorola) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie ++ ;; ++ esac ++ runpath_var='LD_RUN_PATH' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ ++ sysv4.3*) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ runpath_var=LD_RUN_PATH ++ hardcode_runpath_var=yes ++ _LT_TAGVAR(ld_shlibs, $1)=yes ++ fi ++ ;; ++ ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) ++ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ runpath_var='LD_RUN_PATH' ++ ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; ++ ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=':' ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' ++ runpath_var='LD_RUN_PATH' ++ ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; ++ ++ uts4*) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ ++ *) ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ ++ if test x$host_vendor = xsni; then ++ case $host in ++ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' ++ ;; ++ esac ++ fi ++ fi ++]) ++AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) ++test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no ++ ++_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld ++ ++_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl ++_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl ++_LT_DECL([], [extract_expsyms_cmds], [2], ++ [The commands to extract the exported symbol list from a shared archive]) ++ ++# ++# Do we need to explicitly link libc? ++# ++case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in ++x|xyes) ++ # Assume -lc should be added ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes ++ ++ if test "$enable_shared" = yes && test "$GCC" = yes; then ++ case $_LT_TAGVAR(archive_cmds, $1) in ++ *'~'*) ++ # FIXME: we may have to deal with multi-command sequences. ++ ;; ++ '$CC '*) ++ # Test whether the compiler implicitly links with -lc since on some ++ # systems, -lgcc has to come before -lc. If gcc already passes -lc ++ # to ld, don't add -lc before -lgcc. ++ AC_MSG_CHECKING([whether -lc should be explicitly linked in]) ++ $RM conftest* ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then ++ soname=conftest ++ lib=conftest ++ libobjs=conftest.$ac_objext ++ deplibs= ++ wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) ++ pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) ++ compiler_flags=-v ++ linker_flags=-v ++ verstring= ++ output_objdir=. ++ libname=conftest ++ lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) ++ _LT_TAGVAR(allow_undefined_flag, $1)= ++ if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) ++ then ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ else ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes ++ fi ++ _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag ++ else ++ cat conftest.err 1>&5 ++ fi ++ $RM conftest* ++ AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)]) ++ ;; ++ esac ++ fi ++ ;; ++esac ++ ++_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], ++ [Whether or not to add -lc for building shared libraries]) ++_LT_TAGDECL([allow_libtool_libs_with_static_runtimes], ++ [enable_shared_with_static_runtimes], [0], ++ [Whether or not to disallow shared libs when runtime libs are static]) ++_LT_TAGDECL([], [export_dynamic_flag_spec], [1], ++ [Compiler flag to allow reflexive dlopens]) ++_LT_TAGDECL([], [whole_archive_flag_spec], [1], ++ [Compiler flag to generate shared objects directly from archives]) ++_LT_TAGDECL([], [compiler_needs_object], [1], ++ [Whether the compiler copes with passing no objects directly]) ++_LT_TAGDECL([], [old_archive_from_new_cmds], [2], ++ [Create an old-style archive from a shared archive]) ++_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], ++ [Create a temporary old-style archive to link instead of a shared archive]) ++_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) ++_LT_TAGDECL([], [archive_expsym_cmds], [2]) ++_LT_TAGDECL([], [module_cmds], [2], ++ [Commands used to build a loadable module if different from building ++ a shared archive.]) ++_LT_TAGDECL([], [module_expsym_cmds], [2]) ++_LT_TAGDECL([], [with_gnu_ld], [1], ++ [Whether we are building with GNU ld or not]) ++_LT_TAGDECL([], [allow_undefined_flag], [1], ++ [Flag that allows shared libraries with undefined symbols to be built]) ++_LT_TAGDECL([], [no_undefined_flag], [1], ++ [Flag that enforces no undefined symbols]) ++_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], ++ [Flag to hardcode $libdir into a binary during linking. ++ This must work even if $libdir does not exist]) ++_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1], ++ [[If ld is used when linking, flag to hardcode $libdir into a binary ++ during linking. This must work even if $libdir does not exist]]) ++_LT_TAGDECL([], [hardcode_libdir_separator], [1], ++ [Whether we need a single "-rpath" flag with a separated argument]) ++_LT_TAGDECL([], [hardcode_direct], [0], ++ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes ++ DIR into the resulting binary]) ++_LT_TAGDECL([], [hardcode_direct_absolute], [0], ++ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes ++ DIR into the resulting binary and the resulting library dependency is ++ "absolute", i.e impossible to change by setting ${shlibpath_var} if the ++ library is relocated]) ++_LT_TAGDECL([], [hardcode_minus_L], [0], ++ [Set to "yes" if using the -LDIR flag during linking hardcodes DIR ++ into the resulting binary]) ++_LT_TAGDECL([], [hardcode_shlibpath_var], [0], ++ [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR ++ into the resulting binary]) ++_LT_TAGDECL([], [hardcode_automatic], [0], ++ [Set to "yes" if building a shared library automatically hardcodes DIR ++ into the library and all subsequent libraries and executables linked ++ against it]) ++_LT_TAGDECL([], [inherit_rpath], [0], ++ [Set to yes if linker adds runtime paths of dependent libraries ++ to runtime path list]) ++_LT_TAGDECL([], [link_all_deplibs], [0], ++ [Whether libtool must link a program against all its dependency libraries]) ++_LT_TAGDECL([], [fix_srcfile_path], [1], ++ [Fix the shell variable $srcfile for the compiler]) ++_LT_TAGDECL([], [always_export_symbols], [0], ++ [Set to "yes" if exported symbols are required]) ++_LT_TAGDECL([], [export_symbols_cmds], [2], ++ [The commands to list exported symbols]) ++_LT_TAGDECL([], [exclude_expsyms], [1], ++ [Symbols that should not be listed in the preloaded symbols]) ++_LT_TAGDECL([], [include_expsyms], [1], ++ [Symbols that must always be exported]) ++_LT_TAGDECL([], [prelink_cmds], [2], ++ [Commands necessary for linking programs (against libraries) with templates]) ++_LT_TAGDECL([], [file_list_spec], [1], ++ [Specify filename containing input files]) ++dnl FIXME: Not yet implemented ++dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], ++dnl [Compiler flag to generate thread safe objects]) ++])# _LT_LINKER_SHLIBS ++ ++ ++# _LT_LANG_C_CONFIG([TAG]) ++# ------------------------ ++# Ensure that the configuration variables for a C compiler are suitably ++# defined. These variables are subsequently used by _LT_CONFIG to write ++# the compiler configuration to `libtool'. ++m4_defun([_LT_LANG_C_CONFIG], ++[m4_require([_LT_DECL_EGREP])dnl ++lt_save_CC="$CC" ++AC_LANG_PUSH(C) ++ ++# Source file extension for C test sources. ++ac_ext=c ++ ++# Object file extension for compiled C test sources. ++objext=o ++_LT_TAGVAR(objext, $1)=$objext ++ ++# Code to be used in simple compile tests ++lt_simple_compile_test_code="int some_variable = 0;" ++ ++# Code to be used in simple link tests ++lt_simple_link_test_code='int main(){return(0);}' ++ ++_LT_TAG_COMPILER ++# Save the default compiler, since it gets overwritten when the other ++# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. ++compiler_DEFAULT=$CC ++ ++# save warnings/boilerplate of simple test code ++_LT_COMPILER_BOILERPLATE ++_LT_LINKER_BOILERPLATE ++ ++## CAVEAT EMPTOR: ++## There is no encapsulation within the following macros, do not change ++## the running order or otherwise move them around unless you know exactly ++## what you are doing... ++if test -n "$compiler"; then ++ _LT_COMPILER_NO_RTTI($1) ++ _LT_COMPILER_PIC($1) ++ _LT_COMPILER_C_O($1) ++ _LT_COMPILER_FILE_LOCKS($1) ++ _LT_LINKER_SHLIBS($1) ++ _LT_SYS_DYNAMIC_LINKER($1) ++ _LT_LINKER_HARDCODE_LIBPATH($1) ++ LT_SYS_DLOPEN_SELF ++ _LT_CMD_STRIPLIB ++ ++ # Report which library types will actually be built ++ AC_MSG_CHECKING([if libtool supports shared libraries]) ++ AC_MSG_RESULT([$can_build_shared]) ++ ++ AC_MSG_CHECKING([whether to build shared libraries]) ++ test "$can_build_shared" = "no" && enable_shared=no ++ ++ # On AIX, shared libraries and static libraries use the same namespace, and ++ # are all built from PIC. ++ case $host_os in ++ aix3*) ++ test "$enable_shared" = yes && enable_static=no ++ if test -n "$RANLIB"; then ++ archive_cmds="$archive_cmds~\$RANLIB \$lib" ++ postinstall_cmds='$RANLIB $lib' ++ fi ++ ;; ++ ++ aix[[4-9]]*) ++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then ++ test "$enable_shared" = yes && enable_static=no ++ fi ++ ;; ++ esac ++ AC_MSG_RESULT([$enable_shared]) ++ ++ AC_MSG_CHECKING([whether to build static libraries]) ++ # Make sure either enable_shared or enable_static is yes. ++ test "$enable_shared" = yes || enable_static=yes ++ AC_MSG_RESULT([$enable_static]) ++ ++ _LT_CONFIG($1) ++fi ++AC_LANG_POP ++CC="$lt_save_CC" ++])# _LT_LANG_C_CONFIG ++ ++ ++# _LT_PROG_CXX ++# ------------ ++# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++ ++# compiler, we have our own version here. ++m4_defun([_LT_PROG_CXX], ++[ ++pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes]) ++AC_PROG_CXX ++if test -n "$CXX" && ( test "X$CXX" != "Xno" && ++ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || ++ (test "X$CXX" != "Xg++"))) ; then ++ AC_PROG_CXXCPP ++else ++ _lt_caught_CXX_error=yes ++fi ++popdef([AC_MSG_ERROR]) ++])# _LT_PROG_CXX ++ ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([_LT_PROG_CXX], []) ++ ++ ++# _LT_LANG_CXX_CONFIG([TAG]) ++# -------------------------- ++# Ensure that the configuration variables for a C++ compiler are suitably ++# defined. These variables are subsequently used by _LT_CONFIG to write ++# the compiler configuration to `libtool'. ++m4_defun([_LT_LANG_CXX_CONFIG], ++[AC_REQUIRE([_LT_PROG_CXX])dnl ++m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_DECL_EGREP])dnl ++ ++AC_LANG_PUSH(C++) ++_LT_TAGVAR(archive_cmds_need_lc, $1)=no ++_LT_TAGVAR(allow_undefined_flag, $1)= ++_LT_TAGVAR(always_export_symbols, $1)=no ++_LT_TAGVAR(archive_expsym_cmds, $1)= ++_LT_TAGVAR(compiler_needs_object, $1)=no ++_LT_TAGVAR(export_dynamic_flag_spec, $1)= ++_LT_TAGVAR(hardcode_direct, $1)=no ++_LT_TAGVAR(hardcode_direct_absolute, $1)=no ++_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= ++_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= ++_LT_TAGVAR(hardcode_libdir_separator, $1)= ++_LT_TAGVAR(hardcode_minus_L, $1)=no ++_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported ++_LT_TAGVAR(hardcode_automatic, $1)=no ++_LT_TAGVAR(inherit_rpath, $1)=no ++_LT_TAGVAR(module_cmds, $1)= ++_LT_TAGVAR(module_expsym_cmds, $1)= ++_LT_TAGVAR(link_all_deplibs, $1)=unknown ++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds ++_LT_TAGVAR(no_undefined_flag, $1)= ++_LT_TAGVAR(whole_archive_flag_spec, $1)= ++_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no ++ ++# Source file extension for C++ test sources. ++ac_ext=cpp ++ ++# Object file extension for compiled C++ test sources. ++objext=o ++_LT_TAGVAR(objext, $1)=$objext ++ ++# No sense in running all these tests if we already determined that ++# the CXX compiler isn't working. Some variables (like enable_shared) ++# are currently assumed to apply to all compilers on this platform, ++# and will be corrupted by setting them based on a non-working compiler. ++if test "$_lt_caught_CXX_error" != yes; then ++ # Code to be used in simple compile tests ++ lt_simple_compile_test_code="int some_variable = 0;" ++ ++ # Code to be used in simple link tests ++ lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' ++ ++ # ltmain only uses $CC for tagged configurations so make sure $CC is set. ++ _LT_TAG_COMPILER ++ ++ # save warnings/boilerplate of simple test code ++ _LT_COMPILER_BOILERPLATE ++ _LT_LINKER_BOILERPLATE ++ ++ # Allow CC to be a program name with arguments. ++ lt_save_CC=$CC ++ lt_save_LD=$LD ++ lt_save_GCC=$GCC ++ GCC=$GXX ++ lt_save_with_gnu_ld=$with_gnu_ld ++ lt_save_path_LD=$lt_cv_path_LD ++ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then ++ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx ++ else ++ $as_unset lt_cv_prog_gnu_ld ++ fi ++ if test -n "${lt_cv_path_LDCXX+set}"; then ++ lt_cv_path_LD=$lt_cv_path_LDCXX ++ else ++ $as_unset lt_cv_path_LD ++ fi ++ test -z "${LDCXX+set}" || LD=$LDCXX ++ CC=${CXX-"c++"} ++ compiler=$CC ++ _LT_TAGVAR(compiler, $1)=$CC ++ _LT_CC_BASENAME([$compiler]) ++ ++ if test -n "$compiler"; then ++ # We don't want -fno-exception when compiling C++ code, so set the ++ # no_builtin_flag separately ++ if test "$GXX" = yes; then ++ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ++ else ++ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= ++ fi ++ ++ if test "$GXX" = yes; then ++ # Set up default GNU C++ configuration ++ ++ LT_PATH_LD ++ ++ # Check if GNU C++ uses GNU ld as the underlying linker, since the ++ # archiving commands below assume that GNU ld is being used. ++ if test "$with_gnu_ld" = yes; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ ++ # If archive_cmds runs LD, not CC, wlarc should be empty ++ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to ++ # investigate it a little bit more. (MM) ++ wlarc='${wl}' ++ ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if eval "`$CC -print-prog-name=ld` --help 2>&1" | ++ $GREP 'no-whole-archive' > /dev/null; then ++ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ _LT_TAGVAR(whole_archive_flag_spec, $1)= ++ fi ++ else ++ with_gnu_ld=no ++ wlarc= ++ ++ # A generic and very simple default shared library creation ++ # command for GNU C++ for the case where it uses the native ++ # linker, instead of GNU ld. If possible, this setting should ++ # overridden to take advantage of the native linker features on ++ # the platform it is being used on. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' ++ fi ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' ++ ++ else ++ GXX=no ++ with_gnu_ld=no ++ wlarc= ++ fi ++ ++ # PORTME: fill in a description of your system's C++ link characteristics ++ AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) ++ _LT_TAGVAR(ld_shlibs, $1)=yes ++ case $host_os in ++ aix3*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ aix[[4-9]]*) ++ if test "$host_cpu" = ia64; then ++ # On IA64, the linker does run time linking by default, so we don't ++ # have to do anything special. ++ aix_use_runtimelinking=no ++ exp_sym_flag='-Bexport' ++ no_entry_flag="" ++ else ++ aix_use_runtimelinking=no ++ ++ # Test if we are trying to use run time linking or normal ++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we ++ # need to do runtime linking. ++ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) ++ for ld_flag in $LDFLAGS; do ++ case $ld_flag in ++ *-brtl*) ++ aix_use_runtimelinking=yes ++ break ++ ;; ++ esac ++ done ++ ;; ++ esac ++ ++ exp_sym_flag='-bexport' ++ no_entry_flag='-bnoentry' ++ fi ++ ++ # When large executables or shared objects are built, AIX ld can ++ # have problems creating the table of contents. If linking a library ++ # or program results in "error TOC overflow" add -mminimal-toc to ++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not ++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. ++ ++ _LT_TAGVAR(archive_cmds, $1)='' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=':' ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' ++ ++ if test "$GXX" = yes; then ++ case $host_os in aix4.[[012]]|aix4.[[012]].*) ++ # We only want to do this on AIX 4.2 and lower, the check ++ # below for broken collect2 doesn't work under 4.3+ ++ collect2name=`${CC} -print-prog-name=collect2` ++ if test -f "$collect2name" && ++ strings "$collect2name" | $GREP resolve_lib_name >/dev/null ++ then ++ # We have reworked collect2 ++ : ++ else ++ # We have old collect2 ++ _LT_TAGVAR(hardcode_direct, $1)=unsupported ++ # It fails to find uninstalled libraries when the uninstalled ++ # path is not listed in the libpath. Setting hardcode_minus_L ++ # to unsupported forces relinking ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)= ++ fi ++ esac ++ shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi ++ else ++ # not using gcc ++ if test "$host_cpu" = ia64; then ++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release ++ # chokes on -Wl,-G. The following line is correct: ++ shared_flag='-G' ++ else ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag='${wl}-G' ++ else ++ shared_flag='${wl}-bM:SRE' ++ fi ++ fi ++ fi ++ ++ # It seems that -bexpall does not export symbols beginning with ++ # underscore (_), so it is better to generate a list of symbols to ++ # export. ++ _LT_TAGVAR(always_export_symbols, $1)=yes ++ if test "$aix_use_runtimelinking" = yes; then ++ # Warning - without using the other runtime loading flags (-brtl), ++ # -berok will link without error, but may produce a broken library. ++ _LT_TAGVAR(allow_undefined_flag, $1)='-berok' ++ # Determine the default libpath from the value encoded in an empty ++ # executable. ++ _LT_SYS_MODULE_PATH_AIX ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" ++ ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ else ++ if test "$host_cpu" = ia64; then ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' ++ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" ++ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" ++ else ++ # Determine the default libpath from the value encoded in an ++ # empty executable. ++ _LT_SYS_MODULE_PATH_AIX ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" ++ # Warning - without using the other run time loading flags, ++ # -berok will link without error, but may produce a broken library. ++ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' ++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' ++ # Exported symbols can be pulled into shared objects from archives ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes ++ # This is similar to how AIX traditionally builds its shared ++ # libraries. ++ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ fi ++ fi ++ ;; ++ ++ beos*) ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ ++ chorus*) ++ case $cc_basename in ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ ;; ++ ++ cygwin* | mingw* | pw32*) ++ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, ++ # as there is no search path for DLLs. ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ _LT_TAGVAR(always_export_symbols, $1)=no ++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ++ ++ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ # If the export-symbols file already is a .def file (1st line ++ # is EXPORTS), use it as is; otherwise, prepend... ++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ cp $export_symbols $output_objdir/$soname.def; ++ else ++ echo EXPORTS > $output_objdir/$soname.def; ++ cat $export_symbols >> $output_objdir/$soname.def; ++ fi~ ++ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ darwin* | rhapsody*) ++ _LT_DARWIN_LINKER_FEATURES($1) ++ ;; ++ ++ dgux*) ++ case $cc_basename in ++ ec++*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ ghcx*) ++ # Green Hills C++ Compiler ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ ;; ++ ++ freebsd[[12]]*) ++ # C++ shared libraries reported to be fairly broken before ++ # switch to ELF ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ ++ freebsd-elf*) ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ ;; ++ ++ freebsd* | dragonfly*) ++ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF ++ # conventions ++ _LT_TAGVAR(ld_shlibs, $1)=yes ++ ;; ++ ++ gnu*) ++ ;; ++ ++ hpux9*) ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, ++ # but as the default ++ # location of the library. ++ ++ case $cc_basename in ++ CC*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ aCC*) ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ++ ;; ++ *) ++ if test "$GXX" = yes; then ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ else ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ;; ++ ++ hpux10*|hpux11*) ++ if test $with_gnu_ld = no; then ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ case $host_cpu in ++ hppa*64*|ia64*) ++ ;; ++ *) ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ ;; ++ esac ++ fi ++ case $host_cpu in ++ hppa*64*|ia64*) ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ *) ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, ++ # but as the default ++ # location of the library. ++ ;; ++ esac ++ ++ case $cc_basename in ++ CC*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ aCC*) ++ case $host_cpu in ++ hppa*64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ ia64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ esac ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ++ ;; ++ *) ++ if test "$GXX" = yes; then ++ if test $with_gnu_ld = no; then ++ case $host_cpu in ++ hppa*64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ ia64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ esac ++ fi ++ else ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ;; ++ ++ interix[[3-9]]*) ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; ++ irix5* | irix6*) ++ case $cc_basename in ++ CC*) ++ # SGI C++ ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ ++ # Archives containing C++ object files must be created using ++ # "CC -ar", where "CC" is the IRIX C++ compiler. This is ++ # necessary to make sure instantiated templates are included ++ # in the archive. ++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' ++ ;; ++ *) ++ if test "$GXX" = yes; then ++ if test "$with_gnu_ld" = no; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib' ++ fi ++ fi ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ ;; ++ esac ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_TAGVAR(inherit_rpath, $1)=yes ++ ;; ++ ++ linux* | k*bsd*-gnu) ++ case $cc_basename in ++ KCC*) ++ # Kuck and Associates, Inc. (KAI) C++ Compiler ++ ++ # KCC will only create a shared library if the output file ++ # ends with ".so" (or ".sl" for HP-UX), so rename the library ++ # to its proper name (with version) after linking. ++ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ++ ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ ++ # Archives containing C++ object files must be created using ++ # "CC -Bstatic", where "CC" is the KAI C++ compiler. ++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ++ ;; ++ icpc* | ecpc* ) ++ # Intel C++ ++ with_gnu_ld=yes ++ # version 8.0 and above of icpc choke on multiply defined symbols ++ # if we add $predep_objects and $postdep_objects, however 7.1 and ++ # earlier do not add the objects themselves. ++ case `$CC -V 2>&1` in ++ *"Version 7."*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ;; ++ *) # Version 8.0 or newer ++ tmp_idyn= ++ case $host_cpu in ++ ia64*) tmp_idyn=' -i_dynamic';; ++ esac ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ;; ++ esac ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ++ ;; ++ pgCC* | pgcpp*) ++ # Portland Group C++ compiler ++ case `$CC -V` in ++ *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*) ++ _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ ++ rm -rf $tpldir~ ++ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ ++ compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"' ++ _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ ++ rm -rf $tpldir~ ++ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ ++ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~ ++ $RANLIB $oldlib' ++ _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ ++ rm -rf $tpldir~ ++ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ ++ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ ++ rm -rf $tpldir~ ++ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ ++ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ++ ;; ++ *) # Version 6 will use weak symbols ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ++ ;; ++ esac ++ ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ ;; ++ cxx*) ++ # Compaq C++ ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' ++ ++ runpath_var=LD_RUN_PATH ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ++ ;; ++ xl*) ++ # IBM XL 8.0 on PPC, with GNU ld ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ if test "x$supports_anon_versioning" = xyes; then ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' ++ fi ++ ;; ++ *) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C++ 5.9 ++ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ _LT_TAGVAR(compiler_needs_object, $1)=yes ++ ++ # Not sure whether something based on ++ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 ++ # would be better. ++ output_verbose_link_cmd='echo' ++ ++ # Archives containing C++ object files must be created using ++ # "CC -xar", where "CC" is the Sun C++ compiler. This is ++ # necessary to make sure instantiated templates are included ++ # in the archive. ++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ++ ;; ++ esac ++ ;; ++ esac ++ ;; ++ ++ lynxos*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ ++ m88k*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ ++ mvs*) ++ case $cc_basename in ++ cxx*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ ;; ++ ++ netbsd*) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' ++ wlarc= ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ fi ++ # Workaround some broken pre-1.5 toolchains ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ++ ;; ++ ++ *nto* | *qnx*) ++ _LT_TAGVAR(ld_shlibs, $1)=yes ++ ;; ++ ++ openbsd2*) ++ # C++ shared libraries are fairly broken ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ ++ openbsd*) ++ if test -f /usr/libexec/ld.so; then ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ fi ++ output_verbose_link_cmd=echo ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ ++ osf3* | osf4* | osf5*) ++ case $cc_basename in ++ KCC*) ++ # Kuck and Associates, Inc. (KAI) C++ Compiler ++ ++ # KCC will only create a shared library if the output file ++ # ends with ".so" (or ".sl" for HP-UX), so rename the library ++ # to its proper name (with version) after linking. ++ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' ++ ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ # Archives containing C++ object files must be created using ++ # the KAI C++ compiler. ++ case $host in ++ osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; ++ *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; ++ esac ++ ;; ++ RCC*) ++ # Rational C++ 2.4.1 ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ cxx*) ++ case $host in ++ osf3*) ++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ ;; ++ *) ++ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ ++ echo "-hidden">> $lib.exp~ ++ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~ ++ $RM $lib.exp' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ++ ;; ++ esac ++ ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ++ ;; ++ *) ++ if test "$GXX" = yes && test "$with_gnu_ld" = no; then ++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' ++ case $host in ++ osf3*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ ;; ++ esac ++ ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' ++ ++ else ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ;; ++ ++ psos*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ ++ sunos4*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.x ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ lcc*) ++ # Lucid ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ ;; ++ ++ solaris*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.2, 5.x and Centerline C++ ++ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes ++ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' ++ ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ case $host_os in ++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; ++ *) ++ # The compiler driver will combine and reorder linker options, ++ # but understands `-z linker_flag'. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ++ ;; ++ esac ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ ++ output_verbose_link_cmd='echo' ++ ++ # Archives containing C++ object files must be created using ++ # "CC -xar", where "CC" is the Sun C++ compiler. This is ++ # necessary to make sure instantiated templates are included ++ # in the archive. ++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ++ ;; ++ gcx*) ++ # Green Hills C++ Compiler ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++ ++ # The C++ compiler must be used to create the archive. ++ _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ++ ;; ++ *) ++ # GNU C++ compiler with Solaris linker ++ if test "$GXX" = yes && test "$with_gnu_ld" = no; then ++ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' ++ if $CC --version | $GREP -v '^2\.7' > /dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' ++ else ++ # g++ 2.7 appears to require `-G' NOT `-shared' on this ++ # platform. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' ++ fi ++ ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' ++ case $host_os in ++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; ++ *) ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ++ ;; ++ esac ++ fi ++ ;; ++ esac ++ ;; ++ ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) ++ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ runpath_var='LD_RUN_PATH' ++ ++ case $cc_basename in ++ CC*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ ;; ++ ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=':' ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' ++ runpath_var='LD_RUN_PATH' ++ ++ case $cc_basename in ++ CC*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ ;; ++ ++ tandem*) ++ case $cc_basename in ++ NCC*) ++ # NonStop-UX NCC 3.20 ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ ;; ++ ++ vxworks*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ ++ AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) ++ test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no ++ ++ _LT_TAGVAR(GCC, $1)="$GXX" ++ _LT_TAGVAR(LD, $1)="$LD" ++ ++ ## CAVEAT EMPTOR: ++ ## There is no encapsulation within the following macros, do not change ++ ## the running order or otherwise move them around unless you know exactly ++ ## what you are doing... ++ _LT_SYS_HIDDEN_LIBDEPS($1) ++ _LT_COMPILER_PIC($1) ++ _LT_COMPILER_C_O($1) ++ _LT_COMPILER_FILE_LOCKS($1) ++ _LT_LINKER_SHLIBS($1) ++ _LT_SYS_DYNAMIC_LINKER($1) ++ _LT_LINKER_HARDCODE_LIBPATH($1) ++ ++ _LT_CONFIG($1) ++ fi # test -n "$compiler" ++ ++ CC=$lt_save_CC ++ LDCXX=$LD ++ LD=$lt_save_LD ++ GCC=$lt_save_GCC ++ with_gnu_ld=$lt_save_with_gnu_ld ++ lt_cv_path_LDCXX=$lt_cv_path_LD ++ lt_cv_path_LD=$lt_save_path_LD ++ lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld ++ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld ++fi # test "$_lt_caught_CXX_error" != yes ++ ++AC_LANG_POP ++])# _LT_LANG_CXX_CONFIG ++ ++ ++# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) ++# --------------------------------- ++# Figure out "hidden" library dependencies from verbose ++# compiler output when linking a shared library. ++# Parse the compiler output and extract the necessary ++# objects, libraries and library flags. ++m4_defun([_LT_SYS_HIDDEN_LIBDEPS], ++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++# Dependencies to place before and after the object being linked: ++_LT_TAGVAR(predep_objects, $1)= ++_LT_TAGVAR(postdep_objects, $1)= ++_LT_TAGVAR(predeps, $1)= ++_LT_TAGVAR(postdeps, $1)= ++_LT_TAGVAR(compiler_lib_search_path, $1)= ++ ++dnl we can't use the lt_simple_compile_test_code here, ++dnl because it contains code intended for an executable, ++dnl not a library. It's possible we should let each ++dnl tag define a new lt_????_link_test_code variable, ++dnl but it's only used here... ++m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF ++int a; ++void foo (void) { a = 0; } ++_LT_EOF ++], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF ++class Foo ++{ ++public: ++ Foo (void) { a = 0; } ++private: ++ int a; ++}; ++_LT_EOF ++], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF ++ subroutine foo ++ implicit none ++ integer*4 a ++ a=0 ++ return ++ end ++_LT_EOF ++], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF ++ subroutine foo ++ implicit none ++ integer a ++ a=0 ++ return ++ end ++_LT_EOF ++], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF ++public class foo { ++ private int a; ++ public void bar (void) { ++ a = 0; ++ } ++}; ++_LT_EOF ++]) ++dnl Parse the compiler output and extract the necessary ++dnl objects, libraries and library flags. ++if AC_TRY_EVAL(ac_compile); then ++ # Parse the compiler output and extract the necessary ++ # objects, libraries and library flags. ++ ++ # Sentinel used to keep track of whether or not we are before ++ # the conftest object file. ++ pre_test_object_deps_done=no ++ ++ for p in `eval "$output_verbose_link_cmd"`; do ++ case $p in ++ ++ -L* | -R* | -l*) ++ # Some compilers place space between "-{L,R}" and the path. ++ # Remove the space. ++ if test $p = "-L" || ++ test $p = "-R"; then ++ prev=$p ++ continue ++ else ++ prev= ++ fi ++ ++ if test "$pre_test_object_deps_done" = no; then ++ case $p in ++ -L* | -R*) ++ # Internal compiler library paths should come after those ++ # provided the user. The postdeps already come after the ++ # user supplied libs so there is no need to process them. ++ if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then ++ _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" ++ else ++ _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" ++ fi ++ ;; ++ # The "-l" case would never come before the object being ++ # linked, so don't bother handling this case. ++ esac ++ else ++ if test -z "$_LT_TAGVAR(postdeps, $1)"; then ++ _LT_TAGVAR(postdeps, $1)="${prev}${p}" ++ else ++ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" ++ fi ++ fi ++ ;; ++ ++ *.$objext) ++ # This assumes that the test object file only shows up ++ # once in the compiler output. ++ if test "$p" = "conftest.$objext"; then ++ pre_test_object_deps_done=yes ++ continue ++ fi ++ ++ if test "$pre_test_object_deps_done" = no; then ++ if test -z "$_LT_TAGVAR(predep_objects, $1)"; then ++ _LT_TAGVAR(predep_objects, $1)="$p" ++ else ++ _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" ++ fi ++ else ++ if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then ++ _LT_TAGVAR(postdep_objects, $1)="$p" ++ else ++ _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" ++ fi ++ fi ++ ;; ++ ++ *) ;; # Ignore the rest. ++ ++ esac ++ done ++ ++ # Clean up. ++ rm -f a.out a.exe ++else ++ echo "libtool.m4: error: problem compiling $1 test program" ++fi ++ ++$RM -f confest.$objext ++ ++# PORTME: override above test on systems where it is broken ++m4_if([$1], [CXX], ++[case $host_os in ++interix[[3-9]]*) ++ # Interix 3.5 installs completely hosed .la files for C++, so rather than ++ # hack all around it, let's just trust "g++" to DTRT. ++ _LT_TAGVAR(predep_objects,$1)= ++ _LT_TAGVAR(postdep_objects,$1)= ++ _LT_TAGVAR(postdeps,$1)= ++ ;; ++ ++linux*) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C++ 5.9 ++ ++ # The more standards-conforming stlport4 library is ++ # incompatible with the Cstd library. Avoid specifying ++ # it if it's in CXXFLAGS. Ignore libCrun as ++ # -library=stlport4 depends on it. ++ case " $CXX $CXXFLAGS " in ++ *" -library=stlport4 "*) ++ solaris_use_stlport4=yes ++ ;; ++ esac ++ ++ if test "$solaris_use_stlport4" != yes; then ++ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' ++ fi ++ ;; ++ esac ++ ;; ++ ++solaris*) ++ case $cc_basename in ++ CC*) ++ # The more standards-conforming stlport4 library is ++ # incompatible with the Cstd library. Avoid specifying ++ # it if it's in CXXFLAGS. Ignore libCrun as ++ # -library=stlport4 depends on it. ++ case " $CXX $CXXFLAGS " in ++ *" -library=stlport4 "*) ++ solaris_use_stlport4=yes ++ ;; ++ esac ++ ++ # Adding this requires a known-good setup of shared libraries for ++ # Sun compiler versions before 5.6, else PIC objects from an old ++ # archive will be linked into the output, leading to subtle bugs. ++ if test "$solaris_use_stlport4" != yes; then ++ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' ++ fi ++ ;; ++ esac ++ ;; ++esac ++]) ++ ++case " $_LT_TAGVAR(postdeps, $1) " in ++*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; ++esac ++ _LT_TAGVAR(compiler_lib_search_dirs, $1)= ++if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then ++ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` ++fi ++_LT_TAGDECL([], [compiler_lib_search_dirs], [1], ++ [The directories searched by this compiler when creating a shared library]) ++_LT_TAGDECL([], [predep_objects], [1], ++ [Dependencies to place before and after the objects being linked to ++ create a shared library]) ++_LT_TAGDECL([], [postdep_objects], [1]) ++_LT_TAGDECL([], [predeps], [1]) ++_LT_TAGDECL([], [postdeps], [1]) ++_LT_TAGDECL([], [compiler_lib_search_path], [1], ++ [The library search path used internally by the compiler when linking ++ a shared library]) ++])# _LT_SYS_HIDDEN_LIBDEPS ++ ++ ++# _LT_PROG_F77 ++# ------------ ++# Since AC_PROG_F77 is broken, in that it returns the empty string ++# if there is no fortran compiler, we have our own version here. ++m4_defun([_LT_PROG_F77], ++[ ++pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes]) ++AC_PROG_F77 ++if test -z "$F77" || test "X$F77" = "Xno"; then ++ _lt_disable_F77=yes ++fi ++popdef([AC_MSG_ERROR]) ++])# _LT_PROG_F77 ++ ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([_LT_PROG_F77], []) ++ ++ ++# _LT_LANG_F77_CONFIG([TAG]) ++# -------------------------- ++# Ensure that the configuration variables for a Fortran 77 compiler are ++# suitably defined. These variables are subsequently used by _LT_CONFIG ++# to write the compiler configuration to `libtool'. ++m4_defun([_LT_LANG_F77_CONFIG], ++[AC_REQUIRE([_LT_PROG_F77])dnl ++AC_LANG_PUSH(Fortran 77) ++ ++_LT_TAGVAR(archive_cmds_need_lc, $1)=no ++_LT_TAGVAR(allow_undefined_flag, $1)= ++_LT_TAGVAR(always_export_symbols, $1)=no ++_LT_TAGVAR(archive_expsym_cmds, $1)= ++_LT_TAGVAR(export_dynamic_flag_spec, $1)= ++_LT_TAGVAR(hardcode_direct, $1)=no ++_LT_TAGVAR(hardcode_direct_absolute, $1)=no ++_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= ++_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= ++_LT_TAGVAR(hardcode_libdir_separator, $1)= ++_LT_TAGVAR(hardcode_minus_L, $1)=no ++_LT_TAGVAR(hardcode_automatic, $1)=no ++_LT_TAGVAR(inherit_rpath, $1)=no ++_LT_TAGVAR(module_cmds, $1)= ++_LT_TAGVAR(module_expsym_cmds, $1)= ++_LT_TAGVAR(link_all_deplibs, $1)=unknown ++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds ++_LT_TAGVAR(no_undefined_flag, $1)= ++_LT_TAGVAR(whole_archive_flag_spec, $1)= ++_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no ++ ++# Source file extension for f77 test sources. ++ac_ext=f ++ ++# Object file extension for compiled f77 test sources. ++objext=o ++_LT_TAGVAR(objext, $1)=$objext ++ ++# No sense in running all these tests if we already determined that ++# the F77 compiler isn't working. Some variables (like enable_shared) ++# are currently assumed to apply to all compilers on this platform, ++# and will be corrupted by setting them based on a non-working compiler. ++if test "$_lt_disable_F77" != yes; then ++ # Code to be used in simple compile tests ++ lt_simple_compile_test_code="\ ++ subroutine t ++ return ++ end ++" ++ ++ # Code to be used in simple link tests ++ lt_simple_link_test_code="\ ++ program t ++ end ++" ++ ++ # ltmain only uses $CC for tagged configurations so make sure $CC is set. ++ _LT_TAG_COMPILER ++ ++ # save warnings/boilerplate of simple test code ++ _LT_COMPILER_BOILERPLATE ++ _LT_LINKER_BOILERPLATE ++ ++ # Allow CC to be a program name with arguments. ++ lt_save_CC="$CC" ++ lt_save_GCC=$GCC ++ CC=${F77-"f77"} ++ compiler=$CC ++ _LT_TAGVAR(compiler, $1)=$CC ++ _LT_CC_BASENAME([$compiler]) ++ GCC=$G77 ++ if test -n "$compiler"; then ++ AC_MSG_CHECKING([if libtool supports shared libraries]) ++ AC_MSG_RESULT([$can_build_shared]) ++ ++ AC_MSG_CHECKING([whether to build shared libraries]) ++ test "$can_build_shared" = "no" && enable_shared=no ++ ++ # On AIX, shared libraries and static libraries use the same namespace, and ++ # are all built from PIC. ++ case $host_os in ++ aix3*) ++ test "$enable_shared" = yes && enable_static=no ++ if test -n "$RANLIB"; then ++ archive_cmds="$archive_cmds~\$RANLIB \$lib" ++ postinstall_cmds='$RANLIB $lib' ++ fi ++ ;; ++ aix[[4-9]]*) ++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then ++ test "$enable_shared" = yes && enable_static=no ++ fi ++ ;; ++ esac ++ AC_MSG_RESULT([$enable_shared]) ++ ++ AC_MSG_CHECKING([whether to build static libraries]) ++ # Make sure either enable_shared or enable_static is yes. ++ test "$enable_shared" = yes || enable_static=yes ++ AC_MSG_RESULT([$enable_static]) ++ ++ _LT_TAGVAR(GCC, $1)="$G77" ++ _LT_TAGVAR(LD, $1)="$LD" ++ ++ ## CAVEAT EMPTOR: ++ ## There is no encapsulation within the following macros, do not change ++ ## the running order or otherwise move them around unless you know exactly ++ ## what you are doing... ++ _LT_COMPILER_PIC($1) ++ _LT_COMPILER_C_O($1) ++ _LT_COMPILER_FILE_LOCKS($1) ++ _LT_LINKER_SHLIBS($1) ++ _LT_SYS_DYNAMIC_LINKER($1) ++ _LT_LINKER_HARDCODE_LIBPATH($1) ++ ++ _LT_CONFIG($1) ++ fi # test -n "$compiler" ++ ++ GCC=$lt_save_GCC ++ CC="$lt_save_CC" ++fi # test "$_lt_disable_F77" != yes ++ ++AC_LANG_POP ++])# _LT_LANG_F77_CONFIG ++ ++ ++# _LT_PROG_FC ++# ----------- ++# Since AC_PROG_FC is broken, in that it returns the empty string ++# if there is no fortran compiler, we have our own version here. ++m4_defun([_LT_PROG_FC], ++[ ++pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes]) ++AC_PROG_FC ++if test -z "$FC" || test "X$FC" = "Xno"; then ++ _lt_disable_FC=yes ++fi ++popdef([AC_MSG_ERROR]) ++])# _LT_PROG_FC ++ ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([_LT_PROG_FC], []) ++ ++ ++# _LT_LANG_FC_CONFIG([TAG]) ++# ------------------------- ++# Ensure that the configuration variables for a Fortran compiler are ++# suitably defined. These variables are subsequently used by _LT_CONFIG ++# to write the compiler configuration to `libtool'. ++m4_defun([_LT_LANG_FC_CONFIG], ++[AC_REQUIRE([_LT_PROG_FC])dnl ++AC_LANG_PUSH(Fortran) ++ ++_LT_TAGVAR(archive_cmds_need_lc, $1)=no ++_LT_TAGVAR(allow_undefined_flag, $1)= ++_LT_TAGVAR(always_export_symbols, $1)=no ++_LT_TAGVAR(archive_expsym_cmds, $1)= ++_LT_TAGVAR(export_dynamic_flag_spec, $1)= ++_LT_TAGVAR(hardcode_direct, $1)=no ++_LT_TAGVAR(hardcode_direct_absolute, $1)=no ++_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= ++_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= ++_LT_TAGVAR(hardcode_libdir_separator, $1)= ++_LT_TAGVAR(hardcode_minus_L, $1)=no ++_LT_TAGVAR(hardcode_automatic, $1)=no ++_LT_TAGVAR(inherit_rpath, $1)=no ++_LT_TAGVAR(module_cmds, $1)= ++_LT_TAGVAR(module_expsym_cmds, $1)= ++_LT_TAGVAR(link_all_deplibs, $1)=unknown ++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds ++_LT_TAGVAR(no_undefined_flag, $1)= ++_LT_TAGVAR(whole_archive_flag_spec, $1)= ++_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no ++ ++# Source file extension for fc test sources. ++ac_ext=${ac_fc_srcext-f} ++ ++# Object file extension for compiled fc test sources. ++objext=o ++_LT_TAGVAR(objext, $1)=$objext ++ ++# No sense in running all these tests if we already determined that ++# the FC compiler isn't working. Some variables (like enable_shared) ++# are currently assumed to apply to all compilers on this platform, ++# and will be corrupted by setting them based on a non-working compiler. ++if test "$_lt_disable_FC" != yes; then ++ # Code to be used in simple compile tests ++ lt_simple_compile_test_code="\ ++ subroutine t ++ return ++ end ++" ++ ++ # Code to be used in simple link tests ++ lt_simple_link_test_code="\ ++ program t ++ end ++" ++ ++ # ltmain only uses $CC for tagged configurations so make sure $CC is set. ++ _LT_TAG_COMPILER ++ ++ # save warnings/boilerplate of simple test code ++ _LT_COMPILER_BOILERPLATE ++ _LT_LINKER_BOILERPLATE ++ ++ # Allow CC to be a program name with arguments. ++ lt_save_CC="$CC" ++ lt_save_GCC=$GCC ++ CC=${FC-"f95"} ++ compiler=$CC ++ GCC=$ac_cv_fc_compiler_gnu ++ ++ _LT_TAGVAR(compiler, $1)=$CC ++ _LT_CC_BASENAME([$compiler]) ++ ++ if test -n "$compiler"; then ++ AC_MSG_CHECKING([if libtool supports shared libraries]) ++ AC_MSG_RESULT([$can_build_shared]) ++ ++ AC_MSG_CHECKING([whether to build shared libraries]) ++ test "$can_build_shared" = "no" && enable_shared=no ++ ++ # On AIX, shared libraries and static libraries use the same namespace, and ++ # are all built from PIC. ++ case $host_os in ++ aix3*) ++ test "$enable_shared" = yes && enable_static=no ++ if test -n "$RANLIB"; then ++ archive_cmds="$archive_cmds~\$RANLIB \$lib" ++ postinstall_cmds='$RANLIB $lib' ++ fi ++ ;; ++ aix[[4-9]]*) ++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then ++ test "$enable_shared" = yes && enable_static=no ++ fi ++ ;; ++ esac ++ AC_MSG_RESULT([$enable_shared]) ++ ++ AC_MSG_CHECKING([whether to build static libraries]) ++ # Make sure either enable_shared or enable_static is yes. ++ test "$enable_shared" = yes || enable_static=yes ++ AC_MSG_RESULT([$enable_static]) ++ ++ _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" ++ _LT_TAGVAR(LD, $1)="$LD" ++ ++ ## CAVEAT EMPTOR: ++ ## There is no encapsulation within the following macros, do not change ++ ## the running order or otherwise move them around unless you know exactly ++ ## what you are doing... ++ _LT_SYS_HIDDEN_LIBDEPS($1) ++ _LT_COMPILER_PIC($1) ++ _LT_COMPILER_C_O($1) ++ _LT_COMPILER_FILE_LOCKS($1) ++ _LT_LINKER_SHLIBS($1) ++ _LT_SYS_DYNAMIC_LINKER($1) ++ _LT_LINKER_HARDCODE_LIBPATH($1) ++ ++ _LT_CONFIG($1) ++ fi # test -n "$compiler" ++ ++ GCC=$lt_save_GCC ++ CC="$lt_save_CC" ++fi # test "$_lt_disable_FC" != yes ++ ++AC_LANG_POP ++])# _LT_LANG_FC_CONFIG ++ ++ ++# _LT_LANG_GCJ_CONFIG([TAG]) ++# -------------------------- ++# Ensure that the configuration variables for the GNU Java Compiler compiler ++# are suitably defined. These variables are subsequently used by _LT_CONFIG ++# to write the compiler configuration to `libtool'. ++m4_defun([_LT_LANG_GCJ_CONFIG], ++[AC_REQUIRE([LT_PROG_GCJ])dnl ++AC_LANG_SAVE ++ ++# Source file extension for Java test sources. ++ac_ext=java ++ ++# Object file extension for compiled Java test sources. ++objext=o ++_LT_TAGVAR(objext, $1)=$objext ++ ++# Code to be used in simple compile tests ++lt_simple_compile_test_code="class foo {}" ++ ++# Code to be used in simple link tests ++lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' ++ ++# ltmain only uses $CC for tagged configurations so make sure $CC is set. ++_LT_TAG_COMPILER ++ ++# save warnings/boilerplate of simple test code ++_LT_COMPILER_BOILERPLATE ++_LT_LINKER_BOILERPLATE ++ ++# Allow CC to be a program name with arguments. ++lt_save_CC="$CC" ++lt_save_GCC=$GCC ++GCC=yes ++CC=${GCJ-"gcj"} ++compiler=$CC ++_LT_TAGVAR(compiler, $1)=$CC ++_LT_TAGVAR(LD, $1)="$LD" ++_LT_CC_BASENAME([$compiler]) ++ ++# GCJ did not exist at the time GCC didn't implicitly link libc in. ++_LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ ++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds ++ ++## CAVEAT EMPTOR: ++## There is no encapsulation within the following macros, do not change ++## the running order or otherwise move them around unless you know exactly ++## what you are doing... ++if test -n "$compiler"; then ++ _LT_COMPILER_NO_RTTI($1) ++ _LT_COMPILER_PIC($1) ++ _LT_COMPILER_C_O($1) ++ _LT_COMPILER_FILE_LOCKS($1) ++ _LT_LINKER_SHLIBS($1) ++ _LT_LINKER_HARDCODE_LIBPATH($1) ++ ++ _LT_CONFIG($1) ++fi ++ ++AC_LANG_RESTORE ++ ++GCC=$lt_save_GCC ++CC="$lt_save_CC" ++])# _LT_LANG_GCJ_CONFIG ++ ++ ++# _LT_LANG_RC_CONFIG([TAG]) ++# ------------------------- ++# Ensure that the configuration variables for the Windows resource compiler ++# are suitably defined. These variables are subsequently used by _LT_CONFIG ++# to write the compiler configuration to `libtool'. ++m4_defun([_LT_LANG_RC_CONFIG], ++[AC_REQUIRE([LT_PROG_RC])dnl ++AC_LANG_SAVE ++ ++# Source file extension for RC test sources. ++ac_ext=rc ++ ++# Object file extension for compiled RC test sources. ++objext=o ++_LT_TAGVAR(objext, $1)=$objext ++ ++# Code to be used in simple compile tests ++lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' ++ ++# Code to be used in simple link tests ++lt_simple_link_test_code="$lt_simple_compile_test_code" ++ ++# ltmain only uses $CC for tagged configurations so make sure $CC is set. ++_LT_TAG_COMPILER ++ ++# save warnings/boilerplate of simple test code ++_LT_COMPILER_BOILERPLATE ++_LT_LINKER_BOILERPLATE ++ ++# Allow CC to be a program name with arguments. ++lt_save_CC="$CC" ++lt_save_GCC=$GCC ++GCC= ++CC=${RC-"windres"} ++compiler=$CC ++_LT_TAGVAR(compiler, $1)=$CC ++_LT_CC_BASENAME([$compiler]) ++_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes ++ ++if test -n "$compiler"; then ++ : ++ _LT_CONFIG($1) ++fi ++ ++GCC=$lt_save_GCC ++AC_LANG_RESTORE ++CC="$lt_save_CC" ++])# _LT_LANG_RC_CONFIG ++ ++ ++# LT_PROG_GCJ ++# ----------- ++AC_DEFUN([LT_PROG_GCJ], ++[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], ++ [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], ++ [AC_CHECK_TOOL(GCJ, gcj,) ++ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" ++ AC_SUBST(GCJFLAGS)])])[]dnl ++]) ++ ++# Old name: ++AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([LT_AC_PROG_GCJ], []) ++ ++ ++# LT_PROG_RC ++# ---------- ++AC_DEFUN([LT_PROG_RC], ++[AC_CHECK_TOOL(RC, windres,) ++]) ++ ++# Old name: ++AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([LT_AC_PROG_RC], []) ++ ++ ++# _LT_DECL_EGREP ++# -------------- ++# If we don't have a new enough Autoconf to choose the best grep ++# available, choose the one first in the user's PATH. ++m4_defun([_LT_DECL_EGREP], ++[AC_REQUIRE([AC_PROG_EGREP])dnl ++AC_REQUIRE([AC_PROG_FGREP])dnl ++test -z "$GREP" && GREP=grep ++_LT_DECL([], [GREP], [1], [A grep program that handles long lines]) ++_LT_DECL([], [EGREP], [1], [An ERE matcher]) ++_LT_DECL([], [FGREP], [1], [A literal string matcher]) ++dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too ++AC_SUBST([GREP]) ++]) ++ ++ ++# _LT_DECL_SED ++# ------------ ++# Check for a fully-functional sed program, that truncates ++# as few characters as possible. Prefer GNU sed if found. ++m4_defun([_LT_DECL_SED], ++[AC_PROG_SED ++test -z "$SED" && SED=sed ++Xsed="$SED -e 1s/^X//" ++_LT_DECL([], [SED], [1], [A sed program that does not truncate output]) ++_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], ++ [Sed that helps us avoid accidentally triggering echo(1) options like -n]) ++])# _LT_DECL_SED ++ ++m4_ifndef([AC_PROG_SED], [ ++############################################################ ++# NOTE: This macro has been submitted for inclusion into # ++# GNU Autoconf as AC_PROG_SED. When it is available in # ++# a released version of Autoconf we should remove this # ++# macro and use it instead. # ++############################################################ ++ ++m4_defun([AC_PROG_SED], ++[AC_MSG_CHECKING([for a sed that does not truncate output]) ++AC_CACHE_VAL(lt_cv_path_SED, ++[# Loop through the user's path and test for sed and gsed. ++# Then use that list of sed's as ones to test for truncation. ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for lt_ac_prog in sed gsed; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then ++ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" ++ fi ++ done ++ done ++done ++IFS=$as_save_IFS ++lt_ac_max=0 ++lt_ac_count=0 ++# Add /usr/xpg4/bin/sed as it is typically found on Solaris ++# along with /bin/sed that truncates output. ++for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do ++ test ! -f $lt_ac_sed && continue ++ cat /dev/null > conftest.in ++ lt_ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >conftest.in ++ # Check for GNU sed and select it if it is found. ++ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then ++ lt_cv_path_SED=$lt_ac_sed ++ break ++ fi ++ while true; do ++ cat conftest.in conftest.in >conftest.tmp ++ mv conftest.tmp conftest.in ++ cp conftest.in conftest.nl ++ echo >>conftest.nl ++ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break ++ cmp -s conftest.out conftest.nl || break ++ # 10000 chars as input seems more than enough ++ test $lt_ac_count -gt 10 && break ++ lt_ac_count=`expr $lt_ac_count + 1` ++ if test $lt_ac_count -gt $lt_ac_max; then ++ lt_ac_max=$lt_ac_count ++ lt_cv_path_SED=$lt_ac_sed ++ fi ++ done ++done ++]) ++SED=$lt_cv_path_SED ++AC_SUBST([SED]) ++AC_MSG_RESULT([$SED]) ++])#AC_PROG_SED ++])#m4_ifndef ++ ++# Old name: ++AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([LT_AC_PROG_SED], []) ++ ++ ++# _LT_CHECK_SHELL_FEATURES ++# ------------------------ ++# Find out whether the shell is Bourne or XSI compatible, ++# or has some other useful features. ++m4_defun([_LT_CHECK_SHELL_FEATURES], ++[AC_MSG_CHECKING([whether the shell understands some XSI constructs]) ++# Try some XSI features ++xsi_shell=no ++( _lt_dummy="a/b/c" ++ test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ ++ = c,a/b,, \ ++ && eval 'test $(( 1 + 1 )) -eq 2 \ ++ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ ++ && xsi_shell=yes ++AC_MSG_RESULT([$xsi_shell]) ++_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) ++ ++AC_MSG_CHECKING([whether the shell understands "+="]) ++lt_shell_append=no ++( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ ++ >/dev/null 2>&1 \ ++ && lt_shell_append=yes ++AC_MSG_RESULT([$lt_shell_append]) ++_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) ++ ++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then ++ lt_unset=unset ++else ++ lt_unset=false ++fi ++_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl ++ ++# test EBCDIC or ASCII ++case `echo X|tr X '\101'` in ++ A) # ASCII based system ++ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr ++ lt_SP2NL='tr \040 \012' ++ lt_NL2SP='tr \015\012 \040\040' ++ ;; ++ *) # EBCDIC based system ++ lt_SP2NL='tr \100 \n' ++ lt_NL2SP='tr \r\n \100\100' ++ ;; ++esac ++_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl ++_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl ++])# _LT_CHECK_SHELL_FEATURES ++ ++ ++# _LT_PROG_XSI_SHELLFNS ++# --------------------- ++# Bourne and XSI compatible variants of some useful shell functions. ++m4_defun([_LT_PROG_XSI_SHELLFNS], ++[case $xsi_shell in ++ yes) ++ cat << \_LT_EOF >> "$cfgfile" ++ ++# func_dirname file append nondir_replacement ++# Compute the dirname of FILE. If nonempty, add APPEND to the result, ++# otherwise set result to NONDIR_REPLACEMENT. ++func_dirname () ++{ ++ case ${1} in ++ */*) func_dirname_result="${1%/*}${2}" ;; ++ * ) func_dirname_result="${3}" ;; ++ esac ++} ++ ++# func_basename file ++func_basename () ++{ ++ func_basename_result="${1##*/}" ++} ++ ++# func_dirname_and_basename file append nondir_replacement ++# perform func_basename and func_dirname in a single function ++# call: ++# dirname: Compute the dirname of FILE. If nonempty, ++# add APPEND to the result, otherwise set result ++# to NONDIR_REPLACEMENT. ++# value returned in "$func_dirname_result" ++# basename: Compute filename of FILE. ++# value retuned in "$func_basename_result" ++# Implementation must be kept synchronized with func_dirname ++# and func_basename. For efficiency, we do not delegate to ++# those functions but instead duplicate the functionality here. ++func_dirname_and_basename () ++{ ++ case ${1} in ++ */*) func_dirname_result="${1%/*}${2}" ;; ++ * ) func_dirname_result="${3}" ;; ++ esac ++ func_basename_result="${1##*/}" ++} ++ ++# func_stripname prefix suffix name ++# strip PREFIX and SUFFIX off of NAME. ++# PREFIX and SUFFIX must not contain globbing or regex special ++# characters, hashes, percent signs, but SUFFIX may contain a leading ++# dot (in which case that matches only a dot). ++func_stripname () ++{ ++ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are ++ # positional parameters, so assign one to ordinary parameter first. ++ func_stripname_result=${3} ++ func_stripname_result=${func_stripname_result#"${1}"} ++ func_stripname_result=${func_stripname_result%"${2}"} ++} ++ ++# func_opt_split ++func_opt_split () ++{ ++ func_opt_split_opt=${1%%=*} ++ func_opt_split_arg=${1#*=} ++} ++ ++# func_lo2o object ++func_lo2o () ++{ ++ case ${1} in ++ *.lo) func_lo2o_result=${1%.lo}.${objext} ;; ++ *) func_lo2o_result=${1} ;; ++ esac ++} ++ ++# func_xform libobj-or-source ++func_xform () ++{ ++ func_xform_result=${1%.*}.lo ++} ++ ++# func_arith arithmetic-term... ++func_arith () ++{ ++ func_arith_result=$(( $[*] )) ++} ++ ++# func_len string ++# STRING may not start with a hyphen. ++func_len () ++{ ++ func_len_result=${#1} ++} ++ ++_LT_EOF ++ ;; ++ *) # Bourne compatible functions. ++ cat << \_LT_EOF >> "$cfgfile" ++ ++# func_dirname file append nondir_replacement ++# Compute the dirname of FILE. If nonempty, add APPEND to the result, ++# otherwise set result to NONDIR_REPLACEMENT. ++func_dirname () ++{ ++ # Extract subdirectory from the argument. ++ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` ++ if test "X$func_dirname_result" = "X${1}"; then ++ func_dirname_result="${3}" ++ else ++ func_dirname_result="$func_dirname_result${2}" ++ fi ++} ++ ++# func_basename file ++func_basename () ++{ ++ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` ++} ++ ++dnl func_dirname_and_basename ++dnl A portable version of this function is already defined in general.m4sh ++dnl so there is no need for it here. ++ ++# func_stripname prefix suffix name ++# strip PREFIX and SUFFIX off of NAME. ++# PREFIX and SUFFIX must not contain globbing or regex special ++# characters, hashes, percent signs, but SUFFIX may contain a leading ++# dot (in which case that matches only a dot). ++# func_strip_suffix prefix name ++func_stripname () ++{ ++ case ${2} in ++ .*) func_stripname_result=`$ECHO "X${3}" \ ++ | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; ++ *) func_stripname_result=`$ECHO "X${3}" \ ++ | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; ++ esac ++} ++ ++# sed scripts: ++my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q' ++my_sed_long_arg='1s/^-[[^=]]*=//' ++ ++# func_opt_split ++func_opt_split () ++{ ++ func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` ++ func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` ++} ++ ++# func_lo2o object ++func_lo2o () ++{ ++ func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` ++} ++ ++# func_xform libobj-or-source ++func_xform () ++{ ++ func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'` ++} ++ ++# func_arith arithmetic-term... ++func_arith () ++{ ++ func_arith_result=`expr "$[@]"` ++} ++ ++# func_len string ++# STRING may not start with a hyphen. ++func_len () ++{ ++ func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len` ++} ++ ++_LT_EOF ++esac ++ ++case $lt_shell_append in ++ yes) ++ cat << \_LT_EOF >> "$cfgfile" ++ ++# func_append var value ++# Append VALUE to the end of shell variable VAR. ++func_append () ++{ ++ eval "$[1]+=\$[2]" ++} ++_LT_EOF ++ ;; ++ *) ++ cat << \_LT_EOF >> "$cfgfile" ++ ++# func_append var value ++# Append VALUE to the end of shell variable VAR. ++func_append () ++{ ++ eval "$[1]=\$$[1]\$[2]" ++} ++ ++_LT_EOF ++ ;; ++ esac ++]) +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/m4/lt~obsolete.m4 gnome-power-manager-2.24.0.new/m4/lt~obsolete.m4 +--- gnome-power-manager-2.24.0/m4/lt~obsolete.m4 1970-01-01 01:00:00.000000000 +0100 ++++ gnome-power-manager-2.24.0.new/m4/lt~obsolete.m4 2008-11-20 18:37:14.000000000 +0100 +@@ -0,0 +1,92 @@ ++# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- ++# ++# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc. ++# Written by Scott James Remnant, 2004. ++# ++# This file is free software; the Free Software Foundation gives ++# unlimited permission to copy and/or distribute it, with or without ++# modifications, as long as this notice is preserved. ++ ++# serial 4 lt~obsolete.m4 ++ ++# These exist entirely to fool aclocal when bootstrapping libtool. ++# ++# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) ++# which have later been changed to m4_define as they aren't part of the ++# exported API, or moved to Autoconf or Automake where they belong. ++# ++# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN ++# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us ++# using a macro with the same name in our local m4/libtool.m4 it'll ++# pull the old libtool.m4 in (it doesn't see our shiny new m4_define ++# and doesn't know about Autoconf macros at all.) ++# ++# So we provide this file, which has a silly filename so it's always ++# included after everything else. This provides aclocal with the ++# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything ++# because those macros already exist, or will be overwritten later. ++# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. ++# ++# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. ++# Yes, that means every name once taken will need to remain here until ++# we give up compatibility with versions before 1.7, at which point ++# we need to keep only those names which we still refer to. ++ ++# This is to help aclocal find these macros, as it can't see m4_define. ++AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) ++ ++m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) ++m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) ++m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) ++m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) ++m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) ++m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) ++m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) ++m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) ++m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) ++m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) ++m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) ++m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) ++m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) ++m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) ++m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) ++m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) ++m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) ++m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) ++m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) ++m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) ++m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) ++m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) ++m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) ++m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) ++m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) ++m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) ++m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) ++m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) ++m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) ++m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) ++m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) ++m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) ++m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) ++m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) ++m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) ++m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) ++m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) ++m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) ++m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) ++m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) ++m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) ++m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) ++m4_ifndef([AC_LIBTOOL_RC], [AC_DEFUN([AC_LIBTOOL_RC])]) ++m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) ++m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) ++m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) ++m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) ++m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) ++m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) ++m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) ++m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) ++m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) ++m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) ++m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) ++m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/m4/ltoptions.m4 gnome-power-manager-2.24.0.new/m4/ltoptions.m4 +--- gnome-power-manager-2.24.0/m4/ltoptions.m4 1970-01-01 01:00:00.000000000 +0100 ++++ gnome-power-manager-2.24.0.new/m4/ltoptions.m4 2008-11-20 18:37:14.000000000 +0100 +@@ -0,0 +1,368 @@ ++# Helper functions for option handling. -*- Autoconf -*- ++# ++# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. ++# Written by Gary V. Vaughan, 2004 ++# ++# This file is free software; the Free Software Foundation gives ++# unlimited permission to copy and/or distribute it, with or without ++# modifications, as long as this notice is preserved. ++ ++# serial 6 ltoptions.m4 ++ ++# This is to help aclocal find these macros, as it can't see m4_define. ++AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) ++ ++ ++# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) ++# ------------------------------------------ ++m4_define([_LT_MANGLE_OPTION], ++[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) ++ ++ ++# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) ++# --------------------------------------- ++# Set option OPTION-NAME for macro MACRO-NAME, and if there is a ++# matching handler defined, dispatch to it. Other OPTION-NAMEs are ++# saved as a flag. ++m4_define([_LT_SET_OPTION], ++[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl ++m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), ++ _LT_MANGLE_DEFUN([$1], [$2]), ++ [m4_warning([Unknown $1 option `$2'])])[]dnl ++]) ++ ++ ++# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) ++# ------------------------------------------------------------ ++# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. ++m4_define([_LT_IF_OPTION], ++[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) ++ ++ ++# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) ++# ------------------------------------------------------- ++# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME ++# are set. ++m4_define([_LT_UNLESS_OPTIONS], ++[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), ++ [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), ++ [m4_define([$0_found])])])[]dnl ++m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 ++])[]dnl ++]) ++ ++ ++# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) ++# ---------------------------------------- ++# OPTION-LIST is a space-separated list of Libtool options associated ++# with MACRO-NAME. If any OPTION has a matching handler declared with ++# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about ++# the unknown option and exit. ++m4_defun([_LT_SET_OPTIONS], ++[# Set options ++m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), ++ [_LT_SET_OPTION([$1], _LT_Option)]) ++ ++m4_if([$1],[LT_INIT],[ ++ dnl ++ dnl Simply set some default values (i.e off) if boolean options were not ++ dnl specified: ++ _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no ++ ]) ++ _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no ++ ]) ++ dnl ++ dnl If no reference was made to various pairs of opposing options, then ++ dnl we run the default mode handler for the pair. For example, if neither ++ dnl `shared' nor `disable-shared' was passed, we enable building of shared ++ dnl archives by default: ++ _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) ++ _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) ++ _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) ++ _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], ++ [_LT_ENABLE_FAST_INSTALL]) ++ ]) ++])# _LT_SET_OPTIONS ++ ++ ++## --------------------------------- ## ++## Macros to handle LT_INIT options. ## ++## --------------------------------- ## ++ ++# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) ++# ----------------------------------------- ++m4_define([_LT_MANGLE_DEFUN], ++[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) ++ ++ ++# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) ++# ----------------------------------------------- ++m4_define([LT_OPTION_DEFINE], ++[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl ++])# LT_OPTION_DEFINE ++ ++ ++# dlopen ++# ------ ++LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes ++]) ++ ++AU_DEFUN([AC_LIBTOOL_DLOPEN], ++[_LT_SET_OPTION([LT_INIT], [dlopen]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you ++put the `dlopen' option into LT_INIT's first parameter.]) ++]) ++ ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) ++ ++ ++# win32-dll ++# --------- ++# Declare package support for building win32 dll's. ++LT_OPTION_DEFINE([LT_INIT], [win32-dll], ++[enable_win32_dll=yes ++ ++case $host in ++*-*-cygwin* | *-*-mingw* | *-*-pw32*) ++ AC_CHECK_TOOL(AS, as, false) ++ AC_CHECK_TOOL(DLLTOOL, dlltool, false) ++ AC_CHECK_TOOL(OBJDUMP, objdump, false) ++ ;; ++esac ++ ++test -z "$AS" && AS=as ++_LT_DECL([], [AS], [0], [Assembler program])dnl ++ ++test -z "$DLLTOOL" && DLLTOOL=dlltool ++_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl ++ ++test -z "$OBJDUMP" && OBJDUMP=objdump ++_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl ++])# win32-dll ++ ++AU_DEFUN([AC_LIBTOOL_WIN32_DLL], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl ++_LT_SET_OPTION([LT_INIT], [win32-dll]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you ++put the `win32-dll' option into LT_INIT's first parameter.]) ++]) ++ ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) ++ ++ ++# _LT_ENABLE_SHARED([DEFAULT]) ++# ---------------------------- ++# implement the --enable-shared flag, and supports the `shared' and ++# `disable-shared' LT_INIT options. ++# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. ++m4_define([_LT_ENABLE_SHARED], ++[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl ++AC_ARG_ENABLE([shared], ++ [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], ++ [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], ++ [p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_shared=yes ;; ++ no) enable_shared=no ;; ++ *) ++ enable_shared=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_shared=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac], ++ [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) ++ ++ _LT_DECL([build_libtool_libs], [enable_shared], [0], ++ [Whether or not to build shared libraries]) ++])# _LT_ENABLE_SHARED ++ ++LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) ++LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) ++ ++# Old names: ++AC_DEFUN([AC_ENABLE_SHARED], ++[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) ++]) ++ ++AC_DEFUN([AC_DISABLE_SHARED], ++[_LT_SET_OPTION([LT_INIT], [disable-shared]) ++]) ++ ++AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) ++AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) ++ ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AM_ENABLE_SHARED], []) ++dnl AC_DEFUN([AM_DISABLE_SHARED], []) ++ ++ ++ ++# _LT_ENABLE_STATIC([DEFAULT]) ++# ---------------------------- ++# implement the --enable-static flag, and support the `static' and ++# `disable-static' LT_INIT options. ++# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. ++m4_define([_LT_ENABLE_STATIC], ++[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl ++AC_ARG_ENABLE([static], ++ [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], ++ [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], ++ [p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_static=yes ;; ++ no) enable_static=no ;; ++ *) ++ enable_static=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_static=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac], ++ [enable_static=]_LT_ENABLE_STATIC_DEFAULT) ++ ++ _LT_DECL([build_old_libs], [enable_static], [0], ++ [Whether or not to build static libraries]) ++])# _LT_ENABLE_STATIC ++ ++LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) ++LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) ++ ++# Old names: ++AC_DEFUN([AC_ENABLE_STATIC], ++[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) ++]) ++ ++AC_DEFUN([AC_DISABLE_STATIC], ++[_LT_SET_OPTION([LT_INIT], [disable-static]) ++]) ++ ++AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) ++AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) ++ ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AM_ENABLE_STATIC], []) ++dnl AC_DEFUN([AM_DISABLE_STATIC], []) ++ ++ ++ ++# _LT_ENABLE_FAST_INSTALL([DEFAULT]) ++# ---------------------------------- ++# implement the --enable-fast-install flag, and support the `fast-install' ++# and `disable-fast-install' LT_INIT options. ++# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. ++m4_define([_LT_ENABLE_FAST_INSTALL], ++[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl ++AC_ARG_ENABLE([fast-install], ++ [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], ++ [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], ++ [p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_fast_install=yes ;; ++ no) enable_fast_install=no ;; ++ *) ++ enable_fast_install=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_fast_install=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac], ++ [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) ++ ++_LT_DECL([fast_install], [enable_fast_install], [0], ++ [Whether or not to optimize for fast installation])dnl ++])# _LT_ENABLE_FAST_INSTALL ++ ++LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) ++LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) ++ ++# Old names: ++AU_DEFUN([AC_ENABLE_FAST_INSTALL], ++[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you put ++the `fast-install' option into LT_INIT's first parameter.]) ++]) ++ ++AU_DEFUN([AC_DISABLE_FAST_INSTALL], ++[_LT_SET_OPTION([LT_INIT], [disable-fast-install]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you put ++the `disable-fast-install' option into LT_INIT's first parameter.]) ++]) ++ ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) ++dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) ++ ++ ++# _LT_WITH_PIC([MODE]) ++# -------------------- ++# implement the --with-pic flag, and support the `pic-only' and `no-pic' ++# LT_INIT options. ++# MODE is either `yes' or `no'. If omitted, it defaults to `both'. ++m4_define([_LT_WITH_PIC], ++[AC_ARG_WITH([pic], ++ [AS_HELP_STRING([--with-pic], ++ [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], ++ [pic_mode="$withval"], ++ [pic_mode=default]) ++ ++test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) ++ ++_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl ++])# _LT_WITH_PIC ++ ++LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) ++LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) ++ ++# Old name: ++AU_DEFUN([AC_LIBTOOL_PICMODE], ++[_LT_SET_OPTION([LT_INIT], [pic-only]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you ++put the `pic-only' option into LT_INIT's first parameter.]) ++]) ++ ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) ++ ++## ----------------- ## ++## LTDL_INIT Options ## ++## ----------------- ## ++ ++m4_define([_LTDL_MODE], []) ++LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], ++ [m4_define([_LTDL_MODE], [nonrecursive])]) ++LT_OPTION_DEFINE([LTDL_INIT], [recursive], ++ [m4_define([_LTDL_MODE], [recursive])]) ++LT_OPTION_DEFINE([LTDL_INIT], [subproject], ++ [m4_define([_LTDL_MODE], [subproject])]) ++ ++m4_define([_LTDL_TYPE], []) ++LT_OPTION_DEFINE([LTDL_INIT], [installable], ++ [m4_define([_LTDL_TYPE], [installable])]) ++LT_OPTION_DEFINE([LTDL_INIT], [convenience], ++ [m4_define([_LTDL_TYPE], [convenience])]) +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/m4/ltsugar.m4 gnome-power-manager-2.24.0.new/m4/ltsugar.m4 +--- gnome-power-manager-2.24.0/m4/ltsugar.m4 1970-01-01 01:00:00.000000000 +0100 ++++ gnome-power-manager-2.24.0.new/m4/ltsugar.m4 2008-11-20 18:37:14.000000000 +0100 +@@ -0,0 +1,123 @@ ++# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- ++# ++# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc. ++# Written by Gary V. Vaughan, 2004 ++# ++# This file is free software; the Free Software Foundation gives ++# unlimited permission to copy and/or distribute it, with or without ++# modifications, as long as this notice is preserved. ++ ++# serial 5 ltsugar.m4 ++ ++# This is to help aclocal find these macros, as it can't see m4_define. ++AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) ++ ++ ++# lt_join(SEP, ARG1, [ARG2...]) ++# ----------------------------- ++# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their ++# associated separator. ++# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier ++# versions in m4sugar had bugs. ++m4_define([lt_join], ++[m4_if([$#], [1], [], ++ [$#], [2], [[$2]], ++ [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) ++m4_define([_lt_join], ++[m4_if([$#$2], [2], [], ++ [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) ++ ++ ++# lt_car(LIST) ++# lt_cdr(LIST) ++# ------------ ++# Manipulate m4 lists. ++# These macros are necessary as long as will still need to support ++# Autoconf-2.59 which quotes differently. ++m4_define([lt_car], [[$1]]) ++m4_define([lt_cdr], ++[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], ++ [$#], 1, [], ++ [m4_dquote(m4_shift($@))])]) ++m4_define([lt_unquote], $1) ++ ++ ++# lt_append(MACRO-NAME, STRING, [SEPARATOR]) ++# ------------------------------------------ ++# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. ++# Note that neither SEPARATOR nor STRING are expanded; they are appended ++# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). ++# No SEPARATOR is output if MACRO-NAME was previously undefined (different ++# than defined and empty). ++# ++# This macro is needed until we can rely on Autoconf 2.62, since earlier ++# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. ++m4_define([lt_append], ++[m4_define([$1], ++ m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) ++ ++ ++ ++# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) ++# ---------------------------------------------------------- ++# Produce a SEP delimited list of all paired combinations of elements of ++# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list ++# has the form PREFIXmINFIXSUFFIXn. ++m4_define([lt_combine], ++[m4_if([$2], [], [], ++ [m4_if([$4], [], [], ++ [lt_join(m4_quote(m4_default([$1], [[, ]])), ++ lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_prefix, [$2], ++ [m4_foreach(_Lt_suffix, lt_car([m4_shiftn(3, $@)]), ++ [_Lt_prefix[]$3[]_Lt_suffix ])])))))])])dnl ++]) ++ ++ ++# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) ++# ----------------------------------------------------------------------- ++# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited ++# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. ++m4_define([lt_if_append_uniq], ++[m4_ifdef([$1], ++ [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], ++ [lt_append([$1], [$2], [$3])$4], ++ [$5])], ++ [lt_append([$1], [$2], [$3])$4])]) ++ ++ ++# lt_dict_add(DICT, KEY, VALUE) ++# ----------------------------- ++m4_define([lt_dict_add], ++[m4_define([$1($2)], [$3])]) ++ ++ ++# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) ++# -------------------------------------------- ++m4_define([lt_dict_add_subkey], ++[m4_define([$1($2:$3)], [$4])]) ++ ++ ++# lt_dict_fetch(DICT, KEY, [SUBKEY]) ++# ---------------------------------- ++m4_define([lt_dict_fetch], ++[m4_ifval([$3], ++ m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), ++ m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) ++ ++ ++# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) ++# ----------------------------------------------------------------- ++m4_define([lt_if_dict_fetch], ++[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], ++ [$5], ++ [$6])]) ++ ++ ++# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) ++# -------------------------------------------------------------- ++m4_define([lt_dict_filter], ++[m4_if([$5], [], [], ++ [lt_join(m4_quote(m4_default([$4], [[, ]])), ++ lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), ++ [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl ++]) +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/m4/ltversion.m4 gnome-power-manager-2.24.0.new/m4/ltversion.m4 +--- gnome-power-manager-2.24.0/m4/ltversion.m4 1970-01-01 01:00:00.000000000 +0100 ++++ gnome-power-manager-2.24.0.new/m4/ltversion.m4 2008-11-20 18:37:14.000000000 +0100 +@@ -0,0 +1,23 @@ ++# ltversion.m4 -- version numbers -*- Autoconf -*- ++# ++# Copyright (C) 2004 Free Software Foundation, Inc. ++# Written by Scott James Remnant, 2004 ++# ++# This file is free software; the Free Software Foundation gives ++# unlimited permission to copy and/or distribute it, with or without ++# modifications, as long as this notice is preserved. ++ ++# Generated from ltversion.in. ++ ++# serial 2976 ltversion.m4 ++# This file is part of GNU Libtool ++ ++m4_define([LT_PACKAGE_VERSION], [2.2.4]) ++m4_define([LT_PACKAGE_REVISION], [1.2976]) ++ ++AC_DEFUN([LTVERSION_VERSION], ++[macro_version='2.2.4' ++macro_revision='1.2976' ++_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) ++_LT_DECL(, macro_revision, 0) ++]) +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/Makefile.in gnome-power-manager-2.24.0.new/Makefile.in +--- gnome-power-manager-2.24.0/Makefile.in 2008-09-22 22:46:14.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/Makefile.in 2008-11-20 18:37:30.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -13,11 +13,15 @@ + # PARTICULAR PURPOSE. + + @SET_MAKE@ ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = . + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -33,19 +37,22 @@ + host_triplet = @host@ + @HAVE_APPLETS_TRUE@am__append_1 = applets + @HAVE_TESTS_TRUE@am__append_2 = test +-subdir = . + DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(srcdir)/config.h.in \ + $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ + TODO compile config.guess config.sub depcomp install-sh \ + ltmain.sh missing mkinstalldirs ++subdir = . + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ +- configure.lineno config.status.lineno ++ configure.lineno configure.status.lineno + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = config.h + CONFIG_CLEAN_FILES = +@@ -53,13 +60,10 @@ + DIST_SOURCES = + RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ +- install-dvi-recursive install-exec-recursive \ +- install-html-recursive install-info-recursive \ +- install-pdf-recursive install-ps-recursive install-recursive \ +- installcheck-recursive installdirs-recursive pdf-recursive \ +- ps-recursive uninstall-recursive +-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ +- distclean-recursive maintainer-clean-recursive ++ install-exec-recursive install-info-recursive \ ++ install-recursive installcheck-recursive installdirs-recursive \ ++ pdf-recursive ps-recursive uninstall-info-recursive \ ++ uninstall-recursive + ETAGS = etags + CTAGS = ctags + DIST_SUBDIRS = libdbus-glib libhal-glib libidletime libunique src po \ +@@ -77,6 +81,8 @@ + distcleancheck_listfiles = find . -type f -print + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -92,10 +98,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -107,17 +109,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = --disable-schemas-install --disable-scrollkeeper --disable-applets + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -141,8 +149,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -172,6 +193,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -184,16 +206,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -234,13 +260,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -252,7 +275,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -271,6 +293,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -280,11 +303,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + ACLOCAL_AMFLAGS = -I m4 + SUBDIRS = libdbus-glib libhal-glib libidletime libunique src po docs \ + man data help tools $(am__append_1) $(am__append_2) +@@ -345,7 +365,7 @@ + config.h: stamp-h1 + @if test ! -f $@; then \ + rm -f stamp-h1; \ +- $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ ++ $(MAKE) stamp-h1; \ + else :; fi + + stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status +@@ -367,6 +387,7 @@ + + distclean-libtool: + -rm -f libtool ++uninstall-info-am: + + # This directory's subdirectories are mostly independent; you can cd + # into them and run `make' without going through this Makefile. +@@ -399,7 +420,8 @@ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +-$(RECURSIVE_CLEAN_TARGETS): ++mostlyclean-recursive clean-recursive distclean-recursive \ ++maintainer-clean-recursive: + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ +@@ -443,8 +465,8 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + mkid -fID $$unique + tags: TAGS + +@@ -469,8 +491,8 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +@@ -480,12 +502,13 @@ + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ ++ here=`pwd`; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique +@@ -500,22 +523,24 @@ + + distdir: $(DISTFILES) + $(am__remove_distdir) +- test -d $(distdir) || mkdir $(distdir) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ mkdir $(distdir) ++ $(mkdir_p) $(distdir)/data $(distdir)/m4 $(distdir)/po ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -529,7 +554,7 @@ + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ +- || $(MKDIR_P) "$(distdir)/$$subdir" \ ++ || $(mkdir_p) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ +@@ -537,8 +562,6 @@ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ +- am__remove_distdir=: \ +- am__skip_length_check=: \ + distdir) \ + || exit 1; \ + fi; \ +@@ -546,7 +569,7 @@ + -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ +- ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ ++ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r $(distdir) + dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz +@@ -556,10 +579,6 @@ + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 + $(am__remove_distdir) + +-dist-lzma: distdir +- tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma +- $(am__remove_distdir) +- + dist-tarZ: distdir + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__remove_distdir) +@@ -586,8 +605,6 @@ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ +- *.tar.lzma*) \ +- unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ +@@ -627,7 +644,7 @@ + $(am__remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ +- sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' ++ sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' + distuninstallcheck: + @cd $(distuninstallcheck_dir) \ + && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ +@@ -698,20 +715,12 @@ + + install-data-am: + +-install-dvi: install-dvi-recursive +- + install-exec-am: + +-install-html: install-html-recursive +- + install-info: install-info-recursive + + install-man: + +-install-pdf: install-pdf-recursive +- +-install-ps: install-ps-recursive +- + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -732,26 +741,24 @@ + + ps-am: + +-uninstall-am: ++uninstall-am: uninstall-info-am + +-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ +- install-strip ++uninstall-info: uninstall-info-recursive + +-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ +- all all-am am--refresh check check-am clean clean-generic \ +- clean-libtool clean-local ctags ctags-recursive dist dist-all \ +- dist-bzip2 dist-gzip dist-lzma dist-shar dist-tarZ dist-zip \ +- distcheck distclean distclean-generic distclean-hdr \ +- distclean-libtool distclean-tags distcleancheck distdir \ ++.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ ++ check-am clean clean-generic clean-libtool clean-local \ ++ clean-recursive ctags ctags-recursive dist dist-all dist-bzip2 \ ++ dist-gzip dist-shar dist-tarZ dist-zip distcheck distclean \ ++ distclean-generic distclean-hdr distclean-libtool \ ++ distclean-recursive distclean-tags distcleancheck distdir \ + distuninstallcheck dvi dvi-am html html-am info info-am \ +- install install-am install-data install-data-am install-dvi \ +- install-dvi-am install-exec install-exec-am install-html \ +- install-html-am install-info install-info-am install-man \ +- install-pdf install-pdf-am install-ps install-ps-am \ ++ install install-am install-data install-data-am install-exec \ ++ install-exec-am install-info install-info-am install-man \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ +- mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ +- ps ps-am tags tags-recursive uninstall uninstall-am ++ maintainer-clean-recursive mostlyclean mostlyclean-generic \ ++ mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \ ++ tags tags-recursive uninstall uninstall-am uninstall-info-am + + + clean-local : +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/man/Makefile.in gnome-power-manager-2.24.0.new/man/Makefile.in +--- gnome-power-manager-2.24.0/man/Makefile.in 2008-09-22 22:46:14.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/man/Makefile.in 2008-11-20 18:37:29.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -13,11 +13,15 @@ + # PARTICULAR PURPOSE. + + @SET_MAKE@ ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = .. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -35,7 +39,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -50,6 +57,8 @@ + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -65,10 +74,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -80,17 +85,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -114,8 +125,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -145,6 +169,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -157,16 +182,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -207,13 +236,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -225,7 +251,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -244,6 +269,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -253,11 +279,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + EXTRA_DIST = \ + gnome-power-manager.sgml \ + gnome-power-statistics.sgml \ +@@ -306,9 +329,13 @@ + + clean-libtool: + -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + install-man1: $(man1_MANS) $(man_MANS) + @$(NORMAL_INSTALL) +- test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)" ++ test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)" + @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ + l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ + for i in $$l2; do \ +@@ -359,21 +386,22 @@ + + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -389,7 +417,7 @@ + all-am: Makefile $(MANS) + installdirs: + for dir in "$(DESTDIR)$(man1dir)"; do \ +- test -z "$$dir" || $(MKDIR_P) "$$dir"; \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: install-am + install-exec: install-exec-am +@@ -421,7 +449,7 @@ + + distclean: distclean-am + -rm -f Makefile +-distclean-am: clean-am distclean-generic ++distclean-am: clean-am distclean-generic distclean-libtool + + dvi: dvi-am + +@@ -435,20 +463,12 @@ + + install-data-am: install-man + +-install-dvi: install-dvi-am +- + install-exec-am: + +-install-html: install-html-am +- + install-info: install-info-am + + install-man: install-man1 + +-install-pdf: install-pdf-am +- +-install-ps: install-ps-am +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -467,23 +487,20 @@ + + ps-am: + +-uninstall-am: uninstall-man ++uninstall-am: uninstall-info-am uninstall-man + + uninstall-man: uninstall-man1 + +-.MAKE: install-am install-strip +- + .PHONY: all all-am check check-am clean clean-generic clean-libtool \ + clean-local distclean distclean-generic distclean-libtool \ + distdir dvi dvi-am html html-am info info-am install \ +- install-am install-data install-data-am install-dvi \ +- install-dvi-am install-exec install-exec-am install-html \ +- install-html-am install-info install-info-am install-man \ +- install-man1 install-pdf install-pdf-am install-ps \ +- install-ps-am install-strip installcheck installcheck-am \ ++ install-am install-data install-data-am install-exec \ ++ install-exec-am install-info install-info-am install-man \ ++ install-man1 install-strip installcheck installcheck-am \ + installdirs maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ +- ps ps-am uninstall uninstall-am uninstall-man uninstall-man1 ++ ps ps-am uninstall uninstall-am uninstall-info-am \ ++ uninstall-man uninstall-man1 + + + @HAVE_DOCBOOK2MAN_TRUE@gnome-power-manager.1: gnome-power-manager.sgml +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/src/dbus/Makefile.in gnome-power-manager-2.24.0.new/src/dbus/Makefile.in +--- gnome-power-manager-2.24.0/src/dbus/Makefile.in 2008-09-22 22:46:14.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/src/dbus/Makefile.in 2008-11-20 18:37:30.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -13,11 +13,15 @@ + # PARTICULAR PURPOSE. + + @SET_MAKE@ ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = ../.. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -35,7 +39,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -46,6 +53,8 @@ + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -61,10 +70,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -76,17 +81,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -110,8 +121,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -141,6 +165,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -153,16 +178,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -203,13 +232,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -221,7 +247,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -240,6 +265,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -249,11 +275,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + NULL = + EXTRA_DIST = \ + xdg-power-management-core.xml \ +@@ -316,6 +339,10 @@ + + clean-libtool: + -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + tags: TAGS + TAGS: + +@@ -324,21 +351,22 @@ + + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -388,7 +416,7 @@ + + distclean: distclean-am + -rm -f Makefile +-distclean-am: clean-am distclean-generic ++distclean-am: clean-am distclean-generic distclean-libtool + + dvi: dvi-am + +@@ -402,20 +430,12 @@ + + install-data-am: + +-install-dvi: install-dvi-am +- + install-exec-am: + +-install-html: install-html-am +- + install-info: install-info-am + + install-man: + +-install-pdf: install-pdf-am +- +-install-ps: install-ps-am +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -434,21 +454,17 @@ + + ps-am: + +-uninstall-am: +- +-.MAKE: install-am install-strip ++uninstall-am: uninstall-info-am + + .PHONY: all all-am check check-am clean clean-generic clean-libtool \ + clean-local distclean distclean-generic distclean-libtool \ + distdir dvi dvi-am html html-am info info-am install \ +- install-am install-data install-data-am install-dvi \ +- install-dvi-am install-exec install-exec-am install-html \ +- install-html-am install-info install-info-am install-man \ +- install-pdf install-pdf-am install-ps install-ps-am \ ++ install-am install-data install-data-am install-exec \ ++ install-exec-am install-info install-info-am install-man \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ +- uninstall uninstall-am ++ uninstall uninstall-am uninstall-info-am + + + xdg-power-management-core.h: xdg-power-management-core.xml +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/src/Makefile.in gnome-power-manager-2.24.0.new/src/Makefile.in +--- gnome-power-manager-2.24.0/src/Makefile.in 2008-09-22 22:46:14.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/src/Makefile.in 2008-11-20 18:37:29.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,11 +14,15 @@ + + @SET_MAKE@ + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = .. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -46,12 +50,14 @@ + @HAVE_LIBNOTIFY_TRUE@ $(LIBNOTIFY_LIBS) \ + @HAVE_LIBNOTIFY_TRUE@ $(NULL) + +-TESTS = gnome-power-self-test$(EXEEXT) + subdir = src + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -84,15 +90,24 @@ + gpm-feedback-widget.$(OBJEXT) $(am__objects_1) + gnome_power_manager_OBJECTS = $(am_gnome_power_manager_OBJECTS) + am__DEPENDENCIES_1 = +-@HAVE_LIBNOTIFY_TRUE@am__DEPENDENCIES_2 = $(am__DEPENDENCIES_1) \ ++am__DEPENDENCIES_2 = $(top_builddir)/libhal-glib/libhal-gdevice.la \ ++ $(top_builddir)/libhal-glib/libhal-gdevicestore.la \ ++ $(top_builddir)/libhal-glib/libhal-gmanager.la \ ++ $(top_builddir)/libhal-glib/libhal-gpower.la ++am__DEPENDENCIES_3 = \ ++ $(top_builddir)/libdbus-glib/libdbus-monitor-session.la \ ++ $(top_builddir)/libdbus-glib/libdbus-monitor-system.la \ ++ $(top_builddir)/libdbus-glib/libdbus-watch.la \ ++ $(top_builddir)/libdbus-glib/libdbus-proxy.la ++@HAVE_LIBNOTIFY_TRUE@am__DEPENDENCIES_4 = $(am__DEPENDENCIES_1) \ + @HAVE_LIBNOTIFY_TRUE@ $(am__DEPENDENCIES_1) + gnome_power_manager_DEPENDENCIES = $(am__DEPENDENCIES_1) \ + $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ + $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ + $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ +- $(am__DEPENDENCIES_1) $(LOCAL_LIBHAL_LIBS) \ +- $(LOCAL_LIBDBUS_LIBS) $(am__DEPENDENCIES_1) \ +- $(am__DEPENDENCIES_2) ++ $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_2) \ ++ $(am__DEPENDENCIES_3) $(am__DEPENDENCIES_1) \ ++ $(am__DEPENDENCIES_4) + am_gnome_power_preferences_OBJECTS = egg-debug.$(OBJEXT) \ + gpm-dpms.$(OBJEXT) gpm-conf.$(OBJEXT) gpm-idle.$(OBJEXT) \ + gpm-load.$(OBJEXT) gpm-prefs.$(OBJEXT) \ +@@ -101,13 +116,14 @@ + $(am__objects_1) + gnome_power_preferences_OBJECTS = \ + $(am_gnome_power_preferences_OBJECTS) +-@HAVE_UNIQUE_TRUE@am__DEPENDENCIES_3 = $(am__DEPENDENCIES_1) ++am__DEPENDENCIES_5 = $(top_builddir)/libunique/libunique.la ++@HAVE_UNIQUE_TRUE@am__DEPENDENCIES_6 = $(am__DEPENDENCIES_1) + gnome_power_preferences_DEPENDENCIES = $(am__DEPENDENCIES_1) \ + $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ + $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ +- $(am__DEPENDENCIES_1) $(LOCAL_LIBHAL_LIBS) \ +- $(LOCAL_LIBDBUS_LIBS) $(LOCAL_LIBUNIQUE_LIBS) \ +- $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_3) ++ $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_2) \ ++ $(am__DEPENDENCIES_3) $(am__DEPENDENCIES_5) \ ++ $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_6) + am_gnome_power_self_test_OBJECTS = \ + gnome_power_self_test-egg-color.$(OBJEXT) \ + gnome_power_self_test-gpm-ac-adapter.$(OBJEXT) \ +@@ -143,8 +159,8 @@ + gnome_power_self_test_DEPENDENCIES = $(am__DEPENDENCIES_1) \ + $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ + $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ +- $(am__DEPENDENCIES_1) $(LOCAL_LIBDBUS_LIBS) \ +- $(LOCAL_LIBHAL_LIBS) $(am__DEPENDENCIES_1) \ ++ $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_3) \ ++ $(am__DEPENDENCIES_2) $(am__DEPENDENCIES_1) \ + $(am__DEPENDENCIES_1) + am_gnome_power_statistics_OBJECTS = egg-color.$(OBJEXT) \ + egg-debug.$(OBJEXT) gpm-statistics.$(OBJEXT) \ +@@ -155,20 +171,19 @@ + gnome_power_statistics_OBJECTS = $(am_gnome_power_statistics_OBJECTS) + gnome_power_statistics_DEPENDENCIES = $(am__DEPENDENCIES_1) \ + $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ +- $(LOCAL_LIBDBUS_LIBS) $(LOCAL_LIBUNIQUE_LIBS) \ +- $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_3) +-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) ++ $(am__DEPENDENCIES_3) $(am__DEPENDENCIES_5) \ ++ $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_6) ++DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +- --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ +- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) ++LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \ ++ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ ++ $(AM_CFLAGS) $(CFLAGS) + CCLD = $(CC) +-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +- --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ +- $(LDFLAGS) -o $@ ++LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ ++ $(AM_LDFLAGS) $(LDFLAGS) -o $@ + SOURCES = $(gnome_power_manager_SOURCES) \ + $(gnome_power_preferences_SOURCES) \ + $(gnome_power_self_test_SOURCES) \ +@@ -179,19 +194,18 @@ + $(gnome_power_statistics_SOURCES) + RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ +- install-dvi-recursive install-exec-recursive \ +- install-html-recursive install-info-recursive \ +- install-pdf-recursive install-ps-recursive install-recursive \ +- installcheck-recursive installdirs-recursive pdf-recursive \ +- ps-recursive uninstall-recursive +-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ +- distclean-recursive maintainer-clean-recursive ++ install-exec-recursive install-info-recursive \ ++ install-recursive installcheck-recursive installdirs-recursive \ ++ pdf-recursive ps-recursive uninstall-info-recursive \ ++ uninstall-recursive + ETAGS = etags + CTAGS = ctags + DIST_SUBDIRS = $(SUBDIRS) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -207,10 +221,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -222,17 +232,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -256,8 +272,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -287,6 +316,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -299,16 +329,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -349,13 +383,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -367,7 +398,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -386,6 +416,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -395,11 +426,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + SUBDIRS = dbus + AUTOMAKE_OPTIONS = 1.7 + NULL = +@@ -671,6 +699,7 @@ + $(NULL) + + CLEANFILES = $(BUILT_SOURCES) ++TESTS = gnome-power-self-test + MAINTAINERCLEANFILES = \ + *~ \ + Makefile.in \ +@@ -712,15 +741,15 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) +- test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" ++ test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)" + @list='$(bin_PROGRAMS)'; for p in $$list; do \ + p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ + if test -f $$p \ + || test -f $$p1 \ + ; then \ + f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \ +- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \ ++ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \ ++ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \ + else :; fi; \ + done + +@@ -747,16 +776,16 @@ + done + gnome-power-manager$(EXEEXT): $(gnome_power_manager_OBJECTS) $(gnome_power_manager_DEPENDENCIES) + @rm -f gnome-power-manager$(EXEEXT) +- $(LINK) $(gnome_power_manager_OBJECTS) $(gnome_power_manager_LDADD) $(LIBS) ++ $(LINK) $(gnome_power_manager_LDFLAGS) $(gnome_power_manager_OBJECTS) $(gnome_power_manager_LDADD) $(LIBS) + gnome-power-preferences$(EXEEXT): $(gnome_power_preferences_OBJECTS) $(gnome_power_preferences_DEPENDENCIES) + @rm -f gnome-power-preferences$(EXEEXT) +- $(LINK) $(gnome_power_preferences_OBJECTS) $(gnome_power_preferences_LDADD) $(LIBS) ++ $(LINK) $(gnome_power_preferences_LDFLAGS) $(gnome_power_preferences_OBJECTS) $(gnome_power_preferences_LDADD) $(LIBS) + gnome-power-self-test$(EXEEXT): $(gnome_power_self_test_OBJECTS) $(gnome_power_self_test_DEPENDENCIES) + @rm -f gnome-power-self-test$(EXEEXT) +- $(LINK) $(gnome_power_self_test_OBJECTS) $(gnome_power_self_test_LDADD) $(LIBS) ++ $(LINK) $(gnome_power_self_test_LDFLAGS) $(gnome_power_self_test_OBJECTS) $(gnome_power_self_test_LDADD) $(LIBS) + gnome-power-statistics$(EXEEXT): $(gnome_power_statistics_OBJECTS) $(gnome_power_statistics_DEPENDENCIES) + @rm -f gnome-power-statistics$(EXEEXT) +- $(LINK) $(gnome_power_statistics_OBJECTS) $(gnome_power_statistics_LDADD) $(LIBS) ++ $(LINK) $(gnome_power_statistics_LDFLAGS) $(gnome_power_statistics_OBJECTS) $(gnome_power_statistics_LDADD) $(LIBS) + + mostlyclean-compile: + -rm -f *.$(OBJEXT) +@@ -840,428 +869,428 @@ + @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gpm-warnings.Po@am__quote@ + + .c.o: +-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c $< + + .c.obj: +-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: +-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo ++@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< + + gnome_power_self_test-egg-color.o: egg-color.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-egg-color.o -MD -MP -MF $(DEPDIR)/gnome_power_self_test-egg-color.Tpo -c -o gnome_power_self_test-egg-color.o `test -f 'egg-color.c' || echo '$(srcdir)/'`egg-color.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-egg-color.Tpo $(DEPDIR)/gnome_power_self_test-egg-color.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-egg-color.o -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-egg-color.Tpo" -c -o gnome_power_self_test-egg-color.o `test -f 'egg-color.c' || echo '$(srcdir)/'`egg-color.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-egg-color.Tpo" "$(DEPDIR)/gnome_power_self_test-egg-color.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-egg-color.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='egg-color.c' object='gnome_power_self_test-egg-color.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-egg-color.o `test -f 'egg-color.c' || echo '$(srcdir)/'`egg-color.c + + gnome_power_self_test-egg-color.obj: egg-color.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-egg-color.obj -MD -MP -MF $(DEPDIR)/gnome_power_self_test-egg-color.Tpo -c -o gnome_power_self_test-egg-color.obj `if test -f 'egg-color.c'; then $(CYGPATH_W) 'egg-color.c'; else $(CYGPATH_W) '$(srcdir)/egg-color.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-egg-color.Tpo $(DEPDIR)/gnome_power_self_test-egg-color.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-egg-color.obj -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-egg-color.Tpo" -c -o gnome_power_self_test-egg-color.obj `if test -f 'egg-color.c'; then $(CYGPATH_W) 'egg-color.c'; else $(CYGPATH_W) '$(srcdir)/egg-color.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-egg-color.Tpo" "$(DEPDIR)/gnome_power_self_test-egg-color.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-egg-color.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='egg-color.c' object='gnome_power_self_test-egg-color.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-egg-color.obj `if test -f 'egg-color.c'; then $(CYGPATH_W) 'egg-color.c'; else $(CYGPATH_W) '$(srcdir)/egg-color.c'; fi` + + gnome_power_self_test-gpm-ac-adapter.o: gpm-ac-adapter.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-ac-adapter.o -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-ac-adapter.Tpo -c -o gnome_power_self_test-gpm-ac-adapter.o `test -f 'gpm-ac-adapter.c' || echo '$(srcdir)/'`gpm-ac-adapter.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-ac-adapter.Tpo $(DEPDIR)/gnome_power_self_test-gpm-ac-adapter.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-ac-adapter.o -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-ac-adapter.Tpo" -c -o gnome_power_self_test-gpm-ac-adapter.o `test -f 'gpm-ac-adapter.c' || echo '$(srcdir)/'`gpm-ac-adapter.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-ac-adapter.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-ac-adapter.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-ac-adapter.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-ac-adapter.c' object='gnome_power_self_test-gpm-ac-adapter.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-ac-adapter.o `test -f 'gpm-ac-adapter.c' || echo '$(srcdir)/'`gpm-ac-adapter.c + + gnome_power_self_test-gpm-ac-adapter.obj: gpm-ac-adapter.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-ac-adapter.obj -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-ac-adapter.Tpo -c -o gnome_power_self_test-gpm-ac-adapter.obj `if test -f 'gpm-ac-adapter.c'; then $(CYGPATH_W) 'gpm-ac-adapter.c'; else $(CYGPATH_W) '$(srcdir)/gpm-ac-adapter.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-ac-adapter.Tpo $(DEPDIR)/gnome_power_self_test-gpm-ac-adapter.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-ac-adapter.obj -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-ac-adapter.Tpo" -c -o gnome_power_self_test-gpm-ac-adapter.obj `if test -f 'gpm-ac-adapter.c'; then $(CYGPATH_W) 'gpm-ac-adapter.c'; else $(CYGPATH_W) '$(srcdir)/gpm-ac-adapter.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-ac-adapter.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-ac-adapter.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-ac-adapter.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-ac-adapter.c' object='gnome_power_self_test-gpm-ac-adapter.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-ac-adapter.obj `if test -f 'gpm-ac-adapter.c'; then $(CYGPATH_W) 'gpm-ac-adapter.c'; else $(CYGPATH_W) '$(srcdir)/gpm-ac-adapter.c'; fi` + + gnome_power_self_test-gpm-prefs-server.o: gpm-prefs-server.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-prefs-server.o -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-prefs-server.Tpo -c -o gnome_power_self_test-gpm-prefs-server.o `test -f 'gpm-prefs-server.c' || echo '$(srcdir)/'`gpm-prefs-server.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-prefs-server.Tpo $(DEPDIR)/gnome_power_self_test-gpm-prefs-server.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-prefs-server.o -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-prefs-server.Tpo" -c -o gnome_power_self_test-gpm-prefs-server.o `test -f 'gpm-prefs-server.c' || echo '$(srcdir)/'`gpm-prefs-server.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-prefs-server.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-prefs-server.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-prefs-server.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-prefs-server.c' object='gnome_power_self_test-gpm-prefs-server.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-prefs-server.o `test -f 'gpm-prefs-server.c' || echo '$(srcdir)/'`gpm-prefs-server.c + + gnome_power_self_test-gpm-prefs-server.obj: gpm-prefs-server.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-prefs-server.obj -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-prefs-server.Tpo -c -o gnome_power_self_test-gpm-prefs-server.obj `if test -f 'gpm-prefs-server.c'; then $(CYGPATH_W) 'gpm-prefs-server.c'; else $(CYGPATH_W) '$(srcdir)/gpm-prefs-server.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-prefs-server.Tpo $(DEPDIR)/gnome_power_self_test-gpm-prefs-server.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-prefs-server.obj -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-prefs-server.Tpo" -c -o gnome_power_self_test-gpm-prefs-server.obj `if test -f 'gpm-prefs-server.c'; then $(CYGPATH_W) 'gpm-prefs-server.c'; else $(CYGPATH_W) '$(srcdir)/gpm-prefs-server.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-prefs-server.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-prefs-server.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-prefs-server.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-prefs-server.c' object='gnome_power_self_test-gpm-prefs-server.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-prefs-server.obj `if test -f 'gpm-prefs-server.c'; then $(CYGPATH_W) 'gpm-prefs-server.c'; else $(CYGPATH_W) '$(srcdir)/gpm-prefs-server.c'; fi` + + gnome_power_self_test-gpm-control.o: gpm-control.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-control.o -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-control.Tpo -c -o gnome_power_self_test-gpm-control.o `test -f 'gpm-control.c' || echo '$(srcdir)/'`gpm-control.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-control.Tpo $(DEPDIR)/gnome_power_self_test-gpm-control.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-control.o -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-control.Tpo" -c -o gnome_power_self_test-gpm-control.o `test -f 'gpm-control.c' || echo '$(srcdir)/'`gpm-control.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-control.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-control.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-control.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-control.c' object='gnome_power_self_test-gpm-control.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-control.o `test -f 'gpm-control.c' || echo '$(srcdir)/'`gpm-control.c + + gnome_power_self_test-gpm-control.obj: gpm-control.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-control.obj -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-control.Tpo -c -o gnome_power_self_test-gpm-control.obj `if test -f 'gpm-control.c'; then $(CYGPATH_W) 'gpm-control.c'; else $(CYGPATH_W) '$(srcdir)/gpm-control.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-control.Tpo $(DEPDIR)/gnome_power_self_test-gpm-control.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-control.obj -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-control.Tpo" -c -o gnome_power_self_test-gpm-control.obj `if test -f 'gpm-control.c'; then $(CYGPATH_W) 'gpm-control.c'; else $(CYGPATH_W) '$(srcdir)/gpm-control.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-control.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-control.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-control.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-control.c' object='gnome_power_self_test-gpm-control.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-control.obj `if test -f 'gpm-control.c'; then $(CYGPATH_W) 'gpm-control.c'; else $(CYGPATH_W) '$(srcdir)/gpm-control.c'; fi` + + gnome_power_self_test-gpm-self-test.o: gpm-self-test.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-self-test.o -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-self-test.Tpo -c -o gnome_power_self_test-gpm-self-test.o `test -f 'gpm-self-test.c' || echo '$(srcdir)/'`gpm-self-test.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-self-test.Tpo $(DEPDIR)/gnome_power_self_test-gpm-self-test.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-self-test.o -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-self-test.Tpo" -c -o gnome_power_self_test-gpm-self-test.o `test -f 'gpm-self-test.c' || echo '$(srcdir)/'`gpm-self-test.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-self-test.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-self-test.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-self-test.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-self-test.c' object='gnome_power_self_test-gpm-self-test.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-self-test.o `test -f 'gpm-self-test.c' || echo '$(srcdir)/'`gpm-self-test.c + + gnome_power_self_test-gpm-self-test.obj: gpm-self-test.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-self-test.obj -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-self-test.Tpo -c -o gnome_power_self_test-gpm-self-test.obj `if test -f 'gpm-self-test.c'; then $(CYGPATH_W) 'gpm-self-test.c'; else $(CYGPATH_W) '$(srcdir)/gpm-self-test.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-self-test.Tpo $(DEPDIR)/gnome_power_self_test-gpm-self-test.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-self-test.obj -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-self-test.Tpo" -c -o gnome_power_self_test-gpm-self-test.obj `if test -f 'gpm-self-test.c'; then $(CYGPATH_W) 'gpm-self-test.c'; else $(CYGPATH_W) '$(srcdir)/gpm-self-test.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-self-test.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-self-test.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-self-test.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-self-test.c' object='gnome_power_self_test-gpm-self-test.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-self-test.obj `if test -f 'gpm-self-test.c'; then $(CYGPATH_W) 'gpm-self-test.c'; else $(CYGPATH_W) '$(srcdir)/gpm-self-test.c'; fi` + + gnome_power_self_test-gpm-networkmanager.o: gpm-networkmanager.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-networkmanager.o -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-networkmanager.Tpo -c -o gnome_power_self_test-gpm-networkmanager.o `test -f 'gpm-networkmanager.c' || echo '$(srcdir)/'`gpm-networkmanager.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-networkmanager.Tpo $(DEPDIR)/gnome_power_self_test-gpm-networkmanager.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-networkmanager.o -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-networkmanager.Tpo" -c -o gnome_power_self_test-gpm-networkmanager.o `test -f 'gpm-networkmanager.c' || echo '$(srcdir)/'`gpm-networkmanager.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-networkmanager.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-networkmanager.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-networkmanager.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-networkmanager.c' object='gnome_power_self_test-gpm-networkmanager.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-networkmanager.o `test -f 'gpm-networkmanager.c' || echo '$(srcdir)/'`gpm-networkmanager.c + + gnome_power_self_test-gpm-networkmanager.obj: gpm-networkmanager.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-networkmanager.obj -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-networkmanager.Tpo -c -o gnome_power_self_test-gpm-networkmanager.obj `if test -f 'gpm-networkmanager.c'; then $(CYGPATH_W) 'gpm-networkmanager.c'; else $(CYGPATH_W) '$(srcdir)/gpm-networkmanager.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-networkmanager.Tpo $(DEPDIR)/gnome_power_self_test-gpm-networkmanager.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-networkmanager.obj -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-networkmanager.Tpo" -c -o gnome_power_self_test-gpm-networkmanager.obj `if test -f 'gpm-networkmanager.c'; then $(CYGPATH_W) 'gpm-networkmanager.c'; else $(CYGPATH_W) '$(srcdir)/gpm-networkmanager.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-networkmanager.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-networkmanager.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-networkmanager.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-networkmanager.c' object='gnome_power_self_test-gpm-networkmanager.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-networkmanager.obj `if test -f 'gpm-networkmanager.c'; then $(CYGPATH_W) 'gpm-networkmanager.c'; else $(CYGPATH_W) '$(srcdir)/gpm-networkmanager.c'; fi` + + gnome_power_self_test-gpm-dpms.o: gpm-dpms.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-dpms.o -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-dpms.Tpo -c -o gnome_power_self_test-gpm-dpms.o `test -f 'gpm-dpms.c' || echo '$(srcdir)/'`gpm-dpms.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-dpms.Tpo $(DEPDIR)/gnome_power_self_test-gpm-dpms.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-dpms.o -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-dpms.Tpo" -c -o gnome_power_self_test-gpm-dpms.o `test -f 'gpm-dpms.c' || echo '$(srcdir)/'`gpm-dpms.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-dpms.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-dpms.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-dpms.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-dpms.c' object='gnome_power_self_test-gpm-dpms.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-dpms.o `test -f 'gpm-dpms.c' || echo '$(srcdir)/'`gpm-dpms.c + + gnome_power_self_test-gpm-dpms.obj: gpm-dpms.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-dpms.obj -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-dpms.Tpo -c -o gnome_power_self_test-gpm-dpms.obj `if test -f 'gpm-dpms.c'; then $(CYGPATH_W) 'gpm-dpms.c'; else $(CYGPATH_W) '$(srcdir)/gpm-dpms.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-dpms.Tpo $(DEPDIR)/gnome_power_self_test-gpm-dpms.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-dpms.obj -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-dpms.Tpo" -c -o gnome_power_self_test-gpm-dpms.obj `if test -f 'gpm-dpms.c'; then $(CYGPATH_W) 'gpm-dpms.c'; else $(CYGPATH_W) '$(srcdir)/gpm-dpms.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-dpms.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-dpms.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-dpms.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-dpms.c' object='gnome_power_self_test-gpm-dpms.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-dpms.obj `if test -f 'gpm-dpms.c'; then $(CYGPATH_W) 'gpm-dpms.c'; else $(CYGPATH_W) '$(srcdir)/gpm-dpms.c'; fi` + + gnome_power_self_test-gpm-button.o: gpm-button.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-button.o -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-button.Tpo -c -o gnome_power_self_test-gpm-button.o `test -f 'gpm-button.c' || echo '$(srcdir)/'`gpm-button.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-button.Tpo $(DEPDIR)/gnome_power_self_test-gpm-button.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-button.o -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-button.Tpo" -c -o gnome_power_self_test-gpm-button.o `test -f 'gpm-button.c' || echo '$(srcdir)/'`gpm-button.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-button.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-button.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-button.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-button.c' object='gnome_power_self_test-gpm-button.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-button.o `test -f 'gpm-button.c' || echo '$(srcdir)/'`gpm-button.c + + gnome_power_self_test-gpm-button.obj: gpm-button.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-button.obj -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-button.Tpo -c -o gnome_power_self_test-gpm-button.obj `if test -f 'gpm-button.c'; then $(CYGPATH_W) 'gpm-button.c'; else $(CYGPATH_W) '$(srcdir)/gpm-button.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-button.Tpo $(DEPDIR)/gnome_power_self_test-gpm-button.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-button.obj -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-button.Tpo" -c -o gnome_power_self_test-gpm-button.obj `if test -f 'gpm-button.c'; then $(CYGPATH_W) 'gpm-button.c'; else $(CYGPATH_W) '$(srcdir)/gpm-button.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-button.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-button.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-button.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-button.c' object='gnome_power_self_test-gpm-button.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-button.obj `if test -f 'gpm-button.c'; then $(CYGPATH_W) 'gpm-button.c'; else $(CYGPATH_W) '$(srcdir)/gpm-button.c'; fi` + + gnome_power_self_test-egg-debug.o: egg-debug.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-egg-debug.o -MD -MP -MF $(DEPDIR)/gnome_power_self_test-egg-debug.Tpo -c -o gnome_power_self_test-egg-debug.o `test -f 'egg-debug.c' || echo '$(srcdir)/'`egg-debug.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-egg-debug.Tpo $(DEPDIR)/gnome_power_self_test-egg-debug.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-egg-debug.o -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-egg-debug.Tpo" -c -o gnome_power_self_test-egg-debug.o `test -f 'egg-debug.c' || echo '$(srcdir)/'`egg-debug.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-egg-debug.Tpo" "$(DEPDIR)/gnome_power_self_test-egg-debug.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-egg-debug.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='egg-debug.c' object='gnome_power_self_test-egg-debug.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-egg-debug.o `test -f 'egg-debug.c' || echo '$(srcdir)/'`egg-debug.c + + gnome_power_self_test-egg-debug.obj: egg-debug.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-egg-debug.obj -MD -MP -MF $(DEPDIR)/gnome_power_self_test-egg-debug.Tpo -c -o gnome_power_self_test-egg-debug.obj `if test -f 'egg-debug.c'; then $(CYGPATH_W) 'egg-debug.c'; else $(CYGPATH_W) '$(srcdir)/egg-debug.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-egg-debug.Tpo $(DEPDIR)/gnome_power_self_test-egg-debug.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-egg-debug.obj -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-egg-debug.Tpo" -c -o gnome_power_self_test-egg-debug.obj `if test -f 'egg-debug.c'; then $(CYGPATH_W) 'egg-debug.c'; else $(CYGPATH_W) '$(srcdir)/egg-debug.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-egg-debug.Tpo" "$(DEPDIR)/gnome_power_self_test-egg-debug.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-egg-debug.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='egg-debug.c' object='gnome_power_self_test-egg-debug.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-egg-debug.obj `if test -f 'egg-debug.c'; then $(CYGPATH_W) 'egg-debug.c'; else $(CYGPATH_W) '$(srcdir)/egg-debug.c'; fi` + + gnome_power_self_test-gpm-notify.o: gpm-notify.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-notify.o -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-notify.Tpo -c -o gnome_power_self_test-gpm-notify.o `test -f 'gpm-notify.c' || echo '$(srcdir)/'`gpm-notify.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-notify.Tpo $(DEPDIR)/gnome_power_self_test-gpm-notify.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-notify.o -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-notify.Tpo" -c -o gnome_power_self_test-gpm-notify.o `test -f 'gpm-notify.c' || echo '$(srcdir)/'`gpm-notify.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-notify.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-notify.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-notify.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-notify.c' object='gnome_power_self_test-gpm-notify.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-notify.o `test -f 'gpm-notify.c' || echo '$(srcdir)/'`gpm-notify.c + + gnome_power_self_test-gpm-notify.obj: gpm-notify.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-notify.obj -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-notify.Tpo -c -o gnome_power_self_test-gpm-notify.obj `if test -f 'gpm-notify.c'; then $(CYGPATH_W) 'gpm-notify.c'; else $(CYGPATH_W) '$(srcdir)/gpm-notify.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-notify.Tpo $(DEPDIR)/gnome_power_self_test-gpm-notify.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-notify.obj -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-notify.Tpo" -c -o gnome_power_self_test-gpm-notify.obj `if test -f 'gpm-notify.c'; then $(CYGPATH_W) 'gpm-notify.c'; else $(CYGPATH_W) '$(srcdir)/gpm-notify.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-notify.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-notify.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-notify.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-notify.c' object='gnome_power_self_test-gpm-notify.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-notify.obj `if test -f 'gpm-notify.c'; then $(CYGPATH_W) 'gpm-notify.c'; else $(CYGPATH_W) '$(srcdir)/gpm-notify.c'; fi` + + gnome_power_self_test-gpm-screensaver.o: gpm-screensaver.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-screensaver.o -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-screensaver.Tpo -c -o gnome_power_self_test-gpm-screensaver.o `test -f 'gpm-screensaver.c' || echo '$(srcdir)/'`gpm-screensaver.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-screensaver.Tpo $(DEPDIR)/gnome_power_self_test-gpm-screensaver.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-screensaver.o -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-screensaver.Tpo" -c -o gnome_power_self_test-gpm-screensaver.o `test -f 'gpm-screensaver.c' || echo '$(srcdir)/'`gpm-screensaver.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-screensaver.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-screensaver.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-screensaver.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-screensaver.c' object='gnome_power_self_test-gpm-screensaver.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-screensaver.o `test -f 'gpm-screensaver.c' || echo '$(srcdir)/'`gpm-screensaver.c + + gnome_power_self_test-gpm-screensaver.obj: gpm-screensaver.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-screensaver.obj -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-screensaver.Tpo -c -o gnome_power_self_test-gpm-screensaver.obj `if test -f 'gpm-screensaver.c'; then $(CYGPATH_W) 'gpm-screensaver.c'; else $(CYGPATH_W) '$(srcdir)/gpm-screensaver.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-screensaver.Tpo $(DEPDIR)/gnome_power_self_test-gpm-screensaver.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-screensaver.obj -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-screensaver.Tpo" -c -o gnome_power_self_test-gpm-screensaver.obj `if test -f 'gpm-screensaver.c'; then $(CYGPATH_W) 'gpm-screensaver.c'; else $(CYGPATH_W) '$(srcdir)/gpm-screensaver.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-screensaver.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-screensaver.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-screensaver.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-screensaver.c' object='gnome_power_self_test-gpm-screensaver.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-screensaver.obj `if test -f 'gpm-screensaver.c'; then $(CYGPATH_W) 'gpm-screensaver.c'; else $(CYGPATH_W) '$(srcdir)/gpm-screensaver.c'; fi` + + gnome_power_self_test-gpm-engine.o: gpm-engine.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-engine.o -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-engine.Tpo -c -o gnome_power_self_test-gpm-engine.o `test -f 'gpm-engine.c' || echo '$(srcdir)/'`gpm-engine.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-engine.Tpo $(DEPDIR)/gnome_power_self_test-gpm-engine.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-engine.o -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-engine.Tpo" -c -o gnome_power_self_test-gpm-engine.o `test -f 'gpm-engine.c' || echo '$(srcdir)/'`gpm-engine.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-engine.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-engine.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-engine.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-engine.c' object='gnome_power_self_test-gpm-engine.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-engine.o `test -f 'gpm-engine.c' || echo '$(srcdir)/'`gpm-engine.c + + gnome_power_self_test-gpm-engine.obj: gpm-engine.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-engine.obj -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-engine.Tpo -c -o gnome_power_self_test-gpm-engine.obj `if test -f 'gpm-engine.c'; then $(CYGPATH_W) 'gpm-engine.c'; else $(CYGPATH_W) '$(srcdir)/gpm-engine.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-engine.Tpo $(DEPDIR)/gnome_power_self_test-gpm-engine.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-engine.obj -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-engine.Tpo" -c -o gnome_power_self_test-gpm-engine.obj `if test -f 'gpm-engine.c'; then $(CYGPATH_W) 'gpm-engine.c'; else $(CYGPATH_W) '$(srcdir)/gpm-engine.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-engine.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-engine.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-engine.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-engine.c' object='gnome_power_self_test-gpm-engine.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-engine.obj `if test -f 'gpm-engine.c'; then $(CYGPATH_W) 'gpm-engine.c'; else $(CYGPATH_W) '$(srcdir)/gpm-engine.c'; fi` + + gnome_power_self_test-gpm-phone.o: gpm-phone.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-phone.o -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-phone.Tpo -c -o gnome_power_self_test-gpm-phone.o `test -f 'gpm-phone.c' || echo '$(srcdir)/'`gpm-phone.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-phone.Tpo $(DEPDIR)/gnome_power_self_test-gpm-phone.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-phone.o -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-phone.Tpo" -c -o gnome_power_self_test-gpm-phone.o `test -f 'gpm-phone.c' || echo '$(srcdir)/'`gpm-phone.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-phone.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-phone.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-phone.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-phone.c' object='gnome_power_self_test-gpm-phone.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-phone.o `test -f 'gpm-phone.c' || echo '$(srcdir)/'`gpm-phone.c + + gnome_power_self_test-gpm-phone.obj: gpm-phone.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-phone.obj -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-phone.Tpo -c -o gnome_power_self_test-gpm-phone.obj `if test -f 'gpm-phone.c'; then $(CYGPATH_W) 'gpm-phone.c'; else $(CYGPATH_W) '$(srcdir)/gpm-phone.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-phone.Tpo $(DEPDIR)/gnome_power_self_test-gpm-phone.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-phone.obj -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-phone.Tpo" -c -o gnome_power_self_test-gpm-phone.obj `if test -f 'gpm-phone.c'; then $(CYGPATH_W) 'gpm-phone.c'; else $(CYGPATH_W) '$(srcdir)/gpm-phone.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-phone.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-phone.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-phone.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-phone.c' object='gnome_power_self_test-gpm-phone.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-phone.obj `if test -f 'gpm-phone.c'; then $(CYGPATH_W) 'gpm-phone.c'; else $(CYGPATH_W) '$(srcdir)/gpm-phone.c'; fi` + + gnome_power_self_test-gpm-cell.o: gpm-cell.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-cell.o -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-cell.Tpo -c -o gnome_power_self_test-gpm-cell.o `test -f 'gpm-cell.c' || echo '$(srcdir)/'`gpm-cell.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-cell.Tpo $(DEPDIR)/gnome_power_self_test-gpm-cell.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-cell.o -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-cell.Tpo" -c -o gnome_power_self_test-gpm-cell.o `test -f 'gpm-cell.c' || echo '$(srcdir)/'`gpm-cell.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-cell.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-cell.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-cell.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-cell.c' object='gnome_power_self_test-gpm-cell.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-cell.o `test -f 'gpm-cell.c' || echo '$(srcdir)/'`gpm-cell.c + + gnome_power_self_test-gpm-cell.obj: gpm-cell.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-cell.obj -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-cell.Tpo -c -o gnome_power_self_test-gpm-cell.obj `if test -f 'gpm-cell.c'; then $(CYGPATH_W) 'gpm-cell.c'; else $(CYGPATH_W) '$(srcdir)/gpm-cell.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-cell.Tpo $(DEPDIR)/gnome_power_self_test-gpm-cell.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-cell.obj -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-cell.Tpo" -c -o gnome_power_self_test-gpm-cell.obj `if test -f 'gpm-cell.c'; then $(CYGPATH_W) 'gpm-cell.c'; else $(CYGPATH_W) '$(srcdir)/gpm-cell.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-cell.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-cell.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-cell.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-cell.c' object='gnome_power_self_test-gpm-cell.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-cell.obj `if test -f 'gpm-cell.c'; then $(CYGPATH_W) 'gpm-cell.c'; else $(CYGPATH_W) '$(srcdir)/gpm-cell.c'; fi` + + gnome_power_self_test-gpm-cell-unit.o: gpm-cell-unit.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-cell-unit.o -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-cell-unit.Tpo -c -o gnome_power_self_test-gpm-cell-unit.o `test -f 'gpm-cell-unit.c' || echo '$(srcdir)/'`gpm-cell-unit.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-cell-unit.Tpo $(DEPDIR)/gnome_power_self_test-gpm-cell-unit.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-cell-unit.o -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-cell-unit.Tpo" -c -o gnome_power_self_test-gpm-cell-unit.o `test -f 'gpm-cell-unit.c' || echo '$(srcdir)/'`gpm-cell-unit.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-cell-unit.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-cell-unit.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-cell-unit.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-cell-unit.c' object='gnome_power_self_test-gpm-cell-unit.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-cell-unit.o `test -f 'gpm-cell-unit.c' || echo '$(srcdir)/'`gpm-cell-unit.c + + gnome_power_self_test-gpm-cell-unit.obj: gpm-cell-unit.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-cell-unit.obj -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-cell-unit.Tpo -c -o gnome_power_self_test-gpm-cell-unit.obj `if test -f 'gpm-cell-unit.c'; then $(CYGPATH_W) 'gpm-cell-unit.c'; else $(CYGPATH_W) '$(srcdir)/gpm-cell-unit.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-cell-unit.Tpo $(DEPDIR)/gnome_power_self_test-gpm-cell-unit.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-cell-unit.obj -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-cell-unit.Tpo" -c -o gnome_power_self_test-gpm-cell-unit.obj `if test -f 'gpm-cell-unit.c'; then $(CYGPATH_W) 'gpm-cell-unit.c'; else $(CYGPATH_W) '$(srcdir)/gpm-cell-unit.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-cell-unit.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-cell-unit.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-cell-unit.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-cell-unit.c' object='gnome_power_self_test-gpm-cell-unit.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-cell-unit.obj `if test -f 'gpm-cell-unit.c'; then $(CYGPATH_W) 'gpm-cell-unit.c'; else $(CYGPATH_W) '$(srcdir)/gpm-cell-unit.c'; fi` + + gnome_power_self_test-gpm-cell-array.o: gpm-cell-array.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-cell-array.o -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-cell-array.Tpo -c -o gnome_power_self_test-gpm-cell-array.o `test -f 'gpm-cell-array.c' || echo '$(srcdir)/'`gpm-cell-array.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-cell-array.Tpo $(DEPDIR)/gnome_power_self_test-gpm-cell-array.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-cell-array.o -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-cell-array.Tpo" -c -o gnome_power_self_test-gpm-cell-array.o `test -f 'gpm-cell-array.c' || echo '$(srcdir)/'`gpm-cell-array.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-cell-array.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-cell-array.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-cell-array.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-cell-array.c' object='gnome_power_self_test-gpm-cell-array.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-cell-array.o `test -f 'gpm-cell-array.c' || echo '$(srcdir)/'`gpm-cell-array.c + + gnome_power_self_test-gpm-cell-array.obj: gpm-cell-array.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-cell-array.obj -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-cell-array.Tpo -c -o gnome_power_self_test-gpm-cell-array.obj `if test -f 'gpm-cell-array.c'; then $(CYGPATH_W) 'gpm-cell-array.c'; else $(CYGPATH_W) '$(srcdir)/gpm-cell-array.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-cell-array.Tpo $(DEPDIR)/gnome_power_self_test-gpm-cell-array.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-cell-array.obj -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-cell-array.Tpo" -c -o gnome_power_self_test-gpm-cell-array.obj `if test -f 'gpm-cell-array.c'; then $(CYGPATH_W) 'gpm-cell-array.c'; else $(CYGPATH_W) '$(srcdir)/gpm-cell-array.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-cell-array.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-cell-array.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-cell-array.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-cell-array.c' object='gnome_power_self_test-gpm-cell-array.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-cell-array.obj `if test -f 'gpm-cell-array.c'; then $(CYGPATH_W) 'gpm-cell-array.c'; else $(CYGPATH_W) '$(srcdir)/gpm-cell-array.c'; fi` + + gnome_power_self_test-gpm-warnings.o: gpm-warnings.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-warnings.o -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-warnings.Tpo -c -o gnome_power_self_test-gpm-warnings.o `test -f 'gpm-warnings.c' || echo '$(srcdir)/'`gpm-warnings.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-warnings.Tpo $(DEPDIR)/gnome_power_self_test-gpm-warnings.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-warnings.o -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-warnings.Tpo" -c -o gnome_power_self_test-gpm-warnings.o `test -f 'gpm-warnings.c' || echo '$(srcdir)/'`gpm-warnings.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-warnings.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-warnings.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-warnings.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-warnings.c' object='gnome_power_self_test-gpm-warnings.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-warnings.o `test -f 'gpm-warnings.c' || echo '$(srcdir)/'`gpm-warnings.c + + gnome_power_self_test-gpm-warnings.obj: gpm-warnings.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-warnings.obj -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-warnings.Tpo -c -o gnome_power_self_test-gpm-warnings.obj `if test -f 'gpm-warnings.c'; then $(CYGPATH_W) 'gpm-warnings.c'; else $(CYGPATH_W) '$(srcdir)/gpm-warnings.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-warnings.Tpo $(DEPDIR)/gnome_power_self_test-gpm-warnings.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-warnings.obj -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-warnings.Tpo" -c -o gnome_power_self_test-gpm-warnings.obj `if test -f 'gpm-warnings.c'; then $(CYGPATH_W) 'gpm-warnings.c'; else $(CYGPATH_W) '$(srcdir)/gpm-warnings.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-warnings.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-warnings.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-warnings.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-warnings.c' object='gnome_power_self_test-gpm-warnings.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-warnings.obj `if test -f 'gpm-warnings.c'; then $(CYGPATH_W) 'gpm-warnings.c'; else $(CYGPATH_W) '$(srcdir)/gpm-warnings.c'; fi` + + gnome_power_self_test-gpm-conf.o: gpm-conf.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-conf.o -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-conf.Tpo -c -o gnome_power_self_test-gpm-conf.o `test -f 'gpm-conf.c' || echo '$(srcdir)/'`gpm-conf.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-conf.Tpo $(DEPDIR)/gnome_power_self_test-gpm-conf.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-conf.o -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-conf.Tpo" -c -o gnome_power_self_test-gpm-conf.o `test -f 'gpm-conf.c' || echo '$(srcdir)/'`gpm-conf.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-conf.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-conf.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-conf.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-conf.c' object='gnome_power_self_test-gpm-conf.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-conf.o `test -f 'gpm-conf.c' || echo '$(srcdir)/'`gpm-conf.c + + gnome_power_self_test-gpm-conf.obj: gpm-conf.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-conf.obj -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-conf.Tpo -c -o gnome_power_self_test-gpm-conf.obj `if test -f 'gpm-conf.c'; then $(CYGPATH_W) 'gpm-conf.c'; else $(CYGPATH_W) '$(srcdir)/gpm-conf.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-conf.Tpo $(DEPDIR)/gnome_power_self_test-gpm-conf.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-conf.obj -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-conf.Tpo" -c -o gnome_power_self_test-gpm-conf.obj `if test -f 'gpm-conf.c'; then $(CYGPATH_W) 'gpm-conf.c'; else $(CYGPATH_W) '$(srcdir)/gpm-conf.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-conf.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-conf.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-conf.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-conf.c' object='gnome_power_self_test-gpm-conf.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-conf.obj `if test -f 'gpm-conf.c'; then $(CYGPATH_W) 'gpm-conf.c'; else $(CYGPATH_W) '$(srcdir)/gpm-conf.c'; fi` + + gnome_power_self_test-gpm-idle.o: gpm-idle.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-idle.o -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-idle.Tpo -c -o gnome_power_self_test-gpm-idle.o `test -f 'gpm-idle.c' || echo '$(srcdir)/'`gpm-idle.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-idle.Tpo $(DEPDIR)/gnome_power_self_test-gpm-idle.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-idle.o -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-idle.Tpo" -c -o gnome_power_self_test-gpm-idle.o `test -f 'gpm-idle.c' || echo '$(srcdir)/'`gpm-idle.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-idle.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-idle.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-idle.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-idle.c' object='gnome_power_self_test-gpm-idle.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-idle.o `test -f 'gpm-idle.c' || echo '$(srcdir)/'`gpm-idle.c + + gnome_power_self_test-gpm-idle.obj: gpm-idle.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-idle.obj -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-idle.Tpo -c -o gnome_power_self_test-gpm-idle.obj `if test -f 'gpm-idle.c'; then $(CYGPATH_W) 'gpm-idle.c'; else $(CYGPATH_W) '$(srcdir)/gpm-idle.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-idle.Tpo $(DEPDIR)/gnome_power_self_test-gpm-idle.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-idle.obj -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-idle.Tpo" -c -o gnome_power_self_test-gpm-idle.obj `if test -f 'gpm-idle.c'; then $(CYGPATH_W) 'gpm-idle.c'; else $(CYGPATH_W) '$(srcdir)/gpm-idle.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-idle.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-idle.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-idle.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-idle.c' object='gnome_power_self_test-gpm-idle.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-idle.obj `if test -f 'gpm-idle.c'; then $(CYGPATH_W) 'gpm-idle.c'; else $(CYGPATH_W) '$(srcdir)/gpm-idle.c'; fi` + + gnome_power_self_test-gpm-load.o: gpm-load.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-load.o -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-load.Tpo -c -o gnome_power_self_test-gpm-load.o `test -f 'gpm-load.c' || echo '$(srcdir)/'`gpm-load.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-load.Tpo $(DEPDIR)/gnome_power_self_test-gpm-load.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-load.o -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-load.Tpo" -c -o gnome_power_self_test-gpm-load.o `test -f 'gpm-load.c' || echo '$(srcdir)/'`gpm-load.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-load.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-load.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-load.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-load.c' object='gnome_power_self_test-gpm-load.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-load.o `test -f 'gpm-load.c' || echo '$(srcdir)/'`gpm-load.c + + gnome_power_self_test-gpm-load.obj: gpm-load.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-load.obj -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-load.Tpo -c -o gnome_power_self_test-gpm-load.obj `if test -f 'gpm-load.c'; then $(CYGPATH_W) 'gpm-load.c'; else $(CYGPATH_W) '$(srcdir)/gpm-load.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-load.Tpo $(DEPDIR)/gnome_power_self_test-gpm-load.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-load.obj -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-load.Tpo" -c -o gnome_power_self_test-gpm-load.obj `if test -f 'gpm-load.c'; then $(CYGPATH_W) 'gpm-load.c'; else $(CYGPATH_W) '$(srcdir)/gpm-load.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-load.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-load.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-load.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-load.c' object='gnome_power_self_test-gpm-load.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-load.obj `if test -f 'gpm-load.c'; then $(CYGPATH_W) 'gpm-load.c'; else $(CYGPATH_W) '$(srcdir)/gpm-load.c'; fi` + + gnome_power_self_test-gpm-profile.o: gpm-profile.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-profile.o -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-profile.Tpo -c -o gnome_power_self_test-gpm-profile.o `test -f 'gpm-profile.c' || echo '$(srcdir)/'`gpm-profile.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-profile.Tpo $(DEPDIR)/gnome_power_self_test-gpm-profile.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-profile.o -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-profile.Tpo" -c -o gnome_power_self_test-gpm-profile.o `test -f 'gpm-profile.c' || echo '$(srcdir)/'`gpm-profile.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-profile.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-profile.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-profile.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-profile.c' object='gnome_power_self_test-gpm-profile.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-profile.o `test -f 'gpm-profile.c' || echo '$(srcdir)/'`gpm-profile.c + + gnome_power_self_test-gpm-profile.obj: gpm-profile.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-profile.obj -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-profile.Tpo -c -o gnome_power_self_test-gpm-profile.obj `if test -f 'gpm-profile.c'; then $(CYGPATH_W) 'gpm-profile.c'; else $(CYGPATH_W) '$(srcdir)/gpm-profile.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-profile.Tpo $(DEPDIR)/gnome_power_self_test-gpm-profile.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-profile.obj -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-profile.Tpo" -c -o gnome_power_self_test-gpm-profile.obj `if test -f 'gpm-profile.c'; then $(CYGPATH_W) 'gpm-profile.c'; else $(CYGPATH_W) '$(srcdir)/gpm-profile.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-profile.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-profile.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-profile.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-profile.c' object='gnome_power_self_test-gpm-profile.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-profile.obj `if test -f 'gpm-profile.c'; then $(CYGPATH_W) 'gpm-profile.c'; else $(CYGPATH_W) '$(srcdir)/gpm-profile.c'; fi` + + gnome_power_self_test-gpm-marshal.o: gpm-marshal.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-marshal.o -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-marshal.Tpo -c -o gnome_power_self_test-gpm-marshal.o `test -f 'gpm-marshal.c' || echo '$(srcdir)/'`gpm-marshal.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-marshal.Tpo $(DEPDIR)/gnome_power_self_test-gpm-marshal.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-marshal.o -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-marshal.Tpo" -c -o gnome_power_self_test-gpm-marshal.o `test -f 'gpm-marshal.c' || echo '$(srcdir)/'`gpm-marshal.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-marshal.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-marshal.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-marshal.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-marshal.c' object='gnome_power_self_test-gpm-marshal.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-marshal.o `test -f 'gpm-marshal.c' || echo '$(srcdir)/'`gpm-marshal.c + + gnome_power_self_test-gpm-marshal.obj: gpm-marshal.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-marshal.obj -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-marshal.Tpo -c -o gnome_power_self_test-gpm-marshal.obj `if test -f 'gpm-marshal.c'; then $(CYGPATH_W) 'gpm-marshal.c'; else $(CYGPATH_W) '$(srcdir)/gpm-marshal.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-marshal.Tpo $(DEPDIR)/gnome_power_self_test-gpm-marshal.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-marshal.obj -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-marshal.Tpo" -c -o gnome_power_self_test-gpm-marshal.obj `if test -f 'gpm-marshal.c'; then $(CYGPATH_W) 'gpm-marshal.c'; else $(CYGPATH_W) '$(srcdir)/gpm-marshal.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-marshal.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-marshal.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-marshal.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-marshal.c' object='gnome_power_self_test-gpm-marshal.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-marshal.obj `if test -f 'gpm-marshal.c'; then $(CYGPATH_W) 'gpm-marshal.c'; else $(CYGPATH_W) '$(srcdir)/gpm-marshal.c'; fi` + + gnome_power_self_test-gpm-common.o: gpm-common.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-common.o -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-common.Tpo -c -o gnome_power_self_test-gpm-common.o `test -f 'gpm-common.c' || echo '$(srcdir)/'`gpm-common.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-common.Tpo $(DEPDIR)/gnome_power_self_test-gpm-common.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-common.o -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-common.Tpo" -c -o gnome_power_self_test-gpm-common.o `test -f 'gpm-common.c' || echo '$(srcdir)/'`gpm-common.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-common.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-common.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-common.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-common.c' object='gnome_power_self_test-gpm-common.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-common.o `test -f 'gpm-common.c' || echo '$(srcdir)/'`gpm-common.c + + gnome_power_self_test-gpm-common.obj: gpm-common.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-common.obj -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-common.Tpo -c -o gnome_power_self_test-gpm-common.obj `if test -f 'gpm-common.c'; then $(CYGPATH_W) 'gpm-common.c'; else $(CYGPATH_W) '$(srcdir)/gpm-common.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-common.Tpo $(DEPDIR)/gnome_power_self_test-gpm-common.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-common.obj -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-common.Tpo" -c -o gnome_power_self_test-gpm-common.obj `if test -f 'gpm-common.c'; then $(CYGPATH_W) 'gpm-common.c'; else $(CYGPATH_W) '$(srcdir)/gpm-common.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-common.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-common.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-common.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-common.c' object='gnome_power_self_test-gpm-common.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-common.obj `if test -f 'gpm-common.c'; then $(CYGPATH_W) 'gpm-common.c'; else $(CYGPATH_W) '$(srcdir)/gpm-common.c'; fi` + + gnome_power_self_test-gpm-sound.o: gpm-sound.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-sound.o -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-sound.Tpo -c -o gnome_power_self_test-gpm-sound.o `test -f 'gpm-sound.c' || echo '$(srcdir)/'`gpm-sound.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-sound.Tpo $(DEPDIR)/gnome_power_self_test-gpm-sound.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-sound.o -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-sound.Tpo" -c -o gnome_power_self_test-gpm-sound.o `test -f 'gpm-sound.c' || echo '$(srcdir)/'`gpm-sound.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-sound.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-sound.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-sound.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-sound.c' object='gnome_power_self_test-gpm-sound.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-sound.o `test -f 'gpm-sound.c' || echo '$(srcdir)/'`gpm-sound.c + + gnome_power_self_test-gpm-sound.obj: gpm-sound.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-sound.obj -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-sound.Tpo -c -o gnome_power_self_test-gpm-sound.obj `if test -f 'gpm-sound.c'; then $(CYGPATH_W) 'gpm-sound.c'; else $(CYGPATH_W) '$(srcdir)/gpm-sound.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-sound.Tpo $(DEPDIR)/gnome_power_self_test-gpm-sound.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-sound.obj -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-sound.Tpo" -c -o gnome_power_self_test-gpm-sound.obj `if test -f 'gpm-sound.c'; then $(CYGPATH_W) 'gpm-sound.c'; else $(CYGPATH_W) '$(srcdir)/gpm-sound.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-sound.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-sound.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-sound.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-sound.c' object='gnome_power_self_test-gpm-sound.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-sound.obj `if test -f 'gpm-sound.c'; then $(CYGPATH_W) 'gpm-sound.c'; else $(CYGPATH_W) '$(srcdir)/gpm-sound.c'; fi` + + gnome_power_self_test-gpm-info.o: gpm-info.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-info.o -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-info.Tpo -c -o gnome_power_self_test-gpm-info.o `test -f 'gpm-info.c' || echo '$(srcdir)/'`gpm-info.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-info.Tpo $(DEPDIR)/gnome_power_self_test-gpm-info.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-info.o -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-info.Tpo" -c -o gnome_power_self_test-gpm-info.o `test -f 'gpm-info.c' || echo '$(srcdir)/'`gpm-info.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-info.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-info.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-info.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-info.c' object='gnome_power_self_test-gpm-info.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-info.o `test -f 'gpm-info.c' || echo '$(srcdir)/'`gpm-info.c + + gnome_power_self_test-gpm-info.obj: gpm-info.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-info.obj -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-info.Tpo -c -o gnome_power_self_test-gpm-info.obj `if test -f 'gpm-info.c'; then $(CYGPATH_W) 'gpm-info.c'; else $(CYGPATH_W) '$(srcdir)/gpm-info.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-info.Tpo $(DEPDIR)/gnome_power_self_test-gpm-info.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-info.obj -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-info.Tpo" -c -o gnome_power_self_test-gpm-info.obj `if test -f 'gpm-info.c'; then $(CYGPATH_W) 'gpm-info.c'; else $(CYGPATH_W) '$(srcdir)/gpm-info.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-info.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-info.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-info.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-info.c' object='gnome_power_self_test-gpm-info.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-info.obj `if test -f 'gpm-info.c'; then $(CYGPATH_W) 'gpm-info.c'; else $(CYGPATH_W) '$(srcdir)/gpm-info.c'; fi` + + gnome_power_self_test-gpm-array.o: gpm-array.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-array.o -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-array.Tpo -c -o gnome_power_self_test-gpm-array.o `test -f 'gpm-array.c' || echo '$(srcdir)/'`gpm-array.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-array.Tpo $(DEPDIR)/gnome_power_self_test-gpm-array.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-array.o -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-array.Tpo" -c -o gnome_power_self_test-gpm-array.o `test -f 'gpm-array.c' || echo '$(srcdir)/'`gpm-array.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-array.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-array.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-array.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-array.c' object='gnome_power_self_test-gpm-array.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-array.o `test -f 'gpm-array.c' || echo '$(srcdir)/'`gpm-array.c + + gnome_power_self_test-gpm-array.obj: gpm-array.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-array.obj -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-array.Tpo -c -o gnome_power_self_test-gpm-array.obj `if test -f 'gpm-array.c'; then $(CYGPATH_W) 'gpm-array.c'; else $(CYGPATH_W) '$(srcdir)/gpm-array.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-array.Tpo $(DEPDIR)/gnome_power_self_test-gpm-array.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-array.obj -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-array.Tpo" -c -o gnome_power_self_test-gpm-array.obj `if test -f 'gpm-array.c'; then $(CYGPATH_W) 'gpm-array.c'; else $(CYGPATH_W) '$(srcdir)/gpm-array.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-array.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-array.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-array.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-array.c' object='gnome_power_self_test-gpm-array.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-array.obj `if test -f 'gpm-array.c'; then $(CYGPATH_W) 'gpm-array.c'; else $(CYGPATH_W) '$(srcdir)/gpm-array.c'; fi` + + gnome_power_self_test-gpm-array-float.o: gpm-array-float.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-array-float.o -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-array-float.Tpo -c -o gnome_power_self_test-gpm-array-float.o `test -f 'gpm-array-float.c' || echo '$(srcdir)/'`gpm-array-float.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-array-float.Tpo $(DEPDIR)/gnome_power_self_test-gpm-array-float.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-array-float.o -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-array-float.Tpo" -c -o gnome_power_self_test-gpm-array-float.o `test -f 'gpm-array-float.c' || echo '$(srcdir)/'`gpm-array-float.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-array-float.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-array-float.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-array-float.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-array-float.c' object='gnome_power_self_test-gpm-array-float.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-array-float.o `test -f 'gpm-array-float.c' || echo '$(srcdir)/'`gpm-array-float.c + + gnome_power_self_test-gpm-array-float.obj: gpm-array-float.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-array-float.obj -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-array-float.Tpo -c -o gnome_power_self_test-gpm-array-float.obj `if test -f 'gpm-array-float.c'; then $(CYGPATH_W) 'gpm-array-float.c'; else $(CYGPATH_W) '$(srcdir)/gpm-array-float.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-array-float.Tpo $(DEPDIR)/gnome_power_self_test-gpm-array-float.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-array-float.obj -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-array-float.Tpo" -c -o gnome_power_self_test-gpm-array-float.obj `if test -f 'gpm-array-float.c'; then $(CYGPATH_W) 'gpm-array-float.c'; else $(CYGPATH_W) '$(srcdir)/gpm-array-float.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-array-float.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-array-float.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-array-float.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-array-float.c' object='gnome_power_self_test-gpm-array-float.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-array-float.obj `if test -f 'gpm-array-float.c'; then $(CYGPATH_W) 'gpm-array-float.c'; else $(CYGPATH_W) '$(srcdir)/gpm-array-float.c'; fi` + + gnome_power_self_test-gpm-inhibit.o: gpm-inhibit.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-inhibit.o -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-inhibit.Tpo -c -o gnome_power_self_test-gpm-inhibit.o `test -f 'gpm-inhibit.c' || echo '$(srcdir)/'`gpm-inhibit.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-inhibit.Tpo $(DEPDIR)/gnome_power_self_test-gpm-inhibit.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-inhibit.o -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-inhibit.Tpo" -c -o gnome_power_self_test-gpm-inhibit.o `test -f 'gpm-inhibit.c' || echo '$(srcdir)/'`gpm-inhibit.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-inhibit.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-inhibit.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-inhibit.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-inhibit.c' object='gnome_power_self_test-gpm-inhibit.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-inhibit.o `test -f 'gpm-inhibit.c' || echo '$(srcdir)/'`gpm-inhibit.c + + gnome_power_self_test-gpm-inhibit.obj: gpm-inhibit.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-inhibit.obj -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-inhibit.Tpo -c -o gnome_power_self_test-gpm-inhibit.obj `if test -f 'gpm-inhibit.c'; then $(CYGPATH_W) 'gpm-inhibit.c'; else $(CYGPATH_W) '$(srcdir)/gpm-inhibit.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-inhibit.Tpo $(DEPDIR)/gnome_power_self_test-gpm-inhibit.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-inhibit.obj -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-inhibit.Tpo" -c -o gnome_power_self_test-gpm-inhibit.obj `if test -f 'gpm-inhibit.c'; then $(CYGPATH_W) 'gpm-inhibit.c'; else $(CYGPATH_W) '$(srcdir)/gpm-inhibit.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-inhibit.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-inhibit.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-inhibit.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-inhibit.c' object='gnome_power_self_test-gpm-inhibit.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-inhibit.obj `if test -f 'gpm-inhibit.c'; then $(CYGPATH_W) 'gpm-inhibit.c'; else $(CYGPATH_W) '$(srcdir)/gpm-inhibit.c'; fi` + + gnome_power_self_test-gpm-graph-widget.o: gpm-graph-widget.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-graph-widget.o -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-graph-widget.Tpo -c -o gnome_power_self_test-gpm-graph-widget.o `test -f 'gpm-graph-widget.c' || echo '$(srcdir)/'`gpm-graph-widget.c +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-graph-widget.Tpo $(DEPDIR)/gnome_power_self_test-gpm-graph-widget.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-graph-widget.o -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-graph-widget.Tpo" -c -o gnome_power_self_test-gpm-graph-widget.o `test -f 'gpm-graph-widget.c' || echo '$(srcdir)/'`gpm-graph-widget.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-graph-widget.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-graph-widget.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-graph-widget.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-graph-widget.c' object='gnome_power_self_test-gpm-graph-widget.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-graph-widget.o `test -f 'gpm-graph-widget.c' || echo '$(srcdir)/'`gpm-graph-widget.c + + gnome_power_self_test-gpm-graph-widget.obj: gpm-graph-widget.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-graph-widget.obj -MD -MP -MF $(DEPDIR)/gnome_power_self_test-gpm-graph-widget.Tpo -c -o gnome_power_self_test-gpm-graph-widget.obj `if test -f 'gpm-graph-widget.c'; then $(CYGPATH_W) 'gpm-graph-widget.c'; else $(CYGPATH_W) '$(srcdir)/gpm-graph-widget.c'; fi` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gnome_power_self_test-gpm-graph-widget.Tpo $(DEPDIR)/gnome_power_self_test-gpm-graph-widget.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gnome_power_self_test-gpm-graph-widget.obj -MD -MP -MF "$(DEPDIR)/gnome_power_self_test-gpm-graph-widget.Tpo" -c -o gnome_power_self_test-gpm-graph-widget.obj `if test -f 'gpm-graph-widget.c'; then $(CYGPATH_W) 'gpm-graph-widget.c'; else $(CYGPATH_W) '$(srcdir)/gpm-graph-widget.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_power_self_test-gpm-graph-widget.Tpo" "$(DEPDIR)/gnome_power_self_test-gpm-graph-widget.Po"; else rm -f "$(DEPDIR)/gnome_power_self_test-gpm-graph-widget.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-graph-widget.c' object='gnome_power_self_test-gpm-graph-widget.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_power_self_test_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gnome_power_self_test-gpm-graph-widget.obj `if test -f 'gpm-graph-widget.c'; then $(CYGPATH_W) 'gpm-graph-widget.c'; else $(CYGPATH_W) '$(srcdir)/gpm-graph-widget.c'; fi` +@@ -1272,6 +1301,10 @@ + clean-libtool: + -rm -rf .libs _libs + ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: ++ + # This directory's subdirectories are mostly independent; you can cd + # into them and run `make' without going through this Makefile. + # To change the values of `make' variables: instead of editing Makefiles, +@@ -1303,7 +1336,8 @@ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +-$(RECURSIVE_CLEAN_TARGETS): ++mostlyclean-recursive clean-recursive distclean-recursive \ ++maintainer-clean-recursive: + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ +@@ -1347,8 +1381,8 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + mkid -fID $$unique + tags: TAGS + +@@ -1373,8 +1407,8 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +@@ -1384,12 +1418,13 @@ + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ ++ here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique +@@ -1403,9 +1438,9 @@ + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + check-TESTS: $(TESTS) +- @failed=0; all=0; xfail=0; xpass=0; skip=0; ws='[ ]'; \ ++ @failed=0; all=0; xfail=0; xpass=0; skip=0; \ + srcdir=$(srcdir); export srcdir; \ +- list=' $(TESTS) '; \ ++ list='$(TESTS)'; \ + if test -n "$$list"; then \ + for tst in $$list; do \ + if test -f ./$$tst; then dir=./; \ +@@ -1414,7 +1449,7 @@ + if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \ + all=`expr $$all + 1`; \ + case " $(XFAIL_TESTS) " in \ +- *$$ws$$tst$$ws*) \ ++ *" $$tst "*) \ + xpass=`expr $$xpass + 1`; \ + failed=`expr $$failed + 1`; \ + echo "XPASS: $$tst"; \ +@@ -1426,7 +1461,7 @@ + elif test $$? -ne 77; then \ + all=`expr $$all + 1`; \ + case " $(XFAIL_TESTS) " in \ +- *$$ws$$tst$$ws*) \ ++ *" $$tst "*) \ + xfail=`expr $$xfail + 1`; \ + echo "XFAIL: $$tst"; \ + ;; \ +@@ -1476,21 +1511,22 @@ + else :; fi + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -1504,7 +1540,7 @@ + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ +- || $(MKDIR_P) "$(distdir)/$$subdir" \ ++ || $(mkdir_p) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ +@@ -1512,8 +1548,6 @@ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ +- am__remove_distdir=: \ +- am__skip_length_check=: \ + distdir) \ + || exit 1; \ + fi; \ +@@ -1527,7 +1561,7 @@ + installdirs: installdirs-recursive + installdirs-am: + for dir in "$(DESTDIR)$(bindir)"; do \ +- test -z "$$dir" || $(MKDIR_P) "$$dir"; \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) install-recursive +@@ -1566,7 +1600,7 @@ + -rm -rf ./$(DEPDIR) + -rm -f Makefile + distclean-am: clean-am distclean-compile distclean-generic \ +- distclean-tags ++ distclean-libtool distclean-tags + + dvi: dvi-recursive + +@@ -1580,20 +1614,12 @@ + + install-data-am: + +-install-dvi: install-dvi-recursive +- + install-exec-am: install-binPROGRAMS + +-install-html: install-html-recursive +- + install-info: install-info-recursive + + install-man: + +-install-pdf: install-pdf-recursive +- +-install-ps: install-ps-recursive +- + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -1614,26 +1640,24 @@ + + ps-am: + +-uninstall-am: uninstall-binPROGRAMS ++uninstall-am: uninstall-binPROGRAMS uninstall-info-am + +-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ +- install-strip ++uninstall-info: uninstall-info-recursive + +-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ +- all all-am check check-TESTS check-am clean clean-binPROGRAMS \ +- clean-checkPROGRAMS clean-generic clean-libtool clean-local \ +- ctags ctags-recursive distclean distclean-compile \ +- distclean-generic distclean-libtool distclean-tags distdir dvi \ +- dvi-am html html-am info info-am install install-am \ +- install-binPROGRAMS install-data install-data-am install-dvi \ +- install-dvi-am install-exec install-exec-am install-html \ +- install-html-am install-info install-info-am install-man \ +- install-pdf install-pdf-am install-ps install-ps-am \ ++.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \ ++ check-am clean clean-binPROGRAMS clean-checkPROGRAMS \ ++ clean-generic clean-libtool clean-local clean-recursive ctags \ ++ ctags-recursive distclean distclean-compile distclean-generic \ ++ distclean-libtool distclean-recursive distclean-tags distdir \ ++ dvi dvi-am html html-am info info-am install install-am \ ++ install-binPROGRAMS install-data install-data-am install-exec \ ++ install-exec-am install-info install-info-am install-man \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ +- mostlyclean mostlyclean-compile mostlyclean-generic \ +- mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ +- uninstall uninstall-am uninstall-binPROGRAMS ++ maintainer-clean-recursive mostlyclean mostlyclean-compile \ ++ mostlyclean-generic mostlyclean-libtool mostlyclean-recursive \ ++ pdf pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \ ++ uninstall-binPROGRAMS uninstall-info-am + + + gpm-marshal.c: gpm-marshal.list +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/test/Makefile.in gnome-power-manager-2.24.0.new/test/Makefile.in +--- gnome-power-manager-2.24.0/test/Makefile.in 2008-09-22 22:46:14.000000000 +0200 ++++ gnome-power-manager-2.24.0.new/test/Makefile.in 2008-11-20 18:37:30.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,11 +14,15 @@ + + @SET_MAKE@ + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = .. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -37,7 +41,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -54,18 +61,17 @@ + gnome_power_inhibit_test_DEPENDENCIES = $(am__DEPENDENCIES_1) \ + $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ + $(am__DEPENDENCIES_1) +-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) ++DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +- --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ +- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) ++LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \ ++ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ ++ $(AM_CFLAGS) $(CFLAGS) + CCLD = $(CC) +-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +- --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ +- $(LDFLAGS) -o $@ ++LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ ++ $(AM_LDFLAGS) $(LDFLAGS) -o $@ + SOURCES = $(gnome_power_inhibit_test_SOURCES) + DIST_SOURCES = $(gnome_power_inhibit_test_SOURCES) + ETAGS = etags +@@ -73,6 +79,8 @@ + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -88,10 +96,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -103,17 +107,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -137,8 +147,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -168,6 +191,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -180,16 +204,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -230,13 +258,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -248,7 +273,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -267,6 +291,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -276,11 +301,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + NULL = + INCLUDES = \ + $(GLIB_CFLAGS) \ +@@ -361,7 +383,7 @@ + done + gnome-power-inhibit-test$(EXEEXT): $(gnome_power_inhibit_test_OBJECTS) $(gnome_power_inhibit_test_DEPENDENCIES) + @rm -f gnome-power-inhibit-test$(EXEEXT) +- $(LINK) $(gnome_power_inhibit_test_OBJECTS) $(gnome_power_inhibit_test_LDADD) $(LIBS) ++ $(LINK) $(gnome_power_inhibit_test_LDFLAGS) $(gnome_power_inhibit_test_OBJECTS) $(gnome_power_inhibit_test_LDADD) $(LIBS) + + mostlyclean-compile: + -rm -f *.$(OBJEXT) +@@ -372,22 +394,22 @@ + @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gpm-inhibit-test.Po@am__quote@ + + .c.o: +-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c $< + + .c.obj: +-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: +-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo ++@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< +@@ -398,13 +420,17 @@ + clean-libtool: + -rm -rf .libs _libs + ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: ++ + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + mkid -fID $$unique + tags: TAGS + +@@ -416,8 +442,8 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +@@ -427,12 +453,13 @@ + CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ ++ here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique +@@ -446,21 +473,22 @@ + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -510,7 +538,7 @@ + -rm -rf ./$(DEPDIR) + -rm -f Makefile + distclean-am: clean-am distclean-compile distclean-generic \ +- distclean-tags ++ distclean-libtool distclean-tags + + dvi: dvi-am + +@@ -524,20 +552,12 @@ + + install-data-am: + +-install-dvi: install-dvi-am +- + install-exec-am: + +-install-html: install-html-am +- + install-info: install-info-am + + install-man: + +-install-pdf: install-pdf-am +- +-install-ps: install-ps-am +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -558,22 +578,19 @@ + + ps-am: + +-uninstall-am: +- +-.MAKE: install-am install-strip ++uninstall-am: uninstall-info-am + + .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ + clean-libtool clean-local clean-noinstPROGRAMS ctags distclean \ + distclean-compile distclean-generic distclean-libtool \ + distclean-tags distdir dvi dvi-am html html-am info info-am \ +- install install-am install-data install-data-am install-dvi \ +- install-dvi-am install-exec install-exec-am install-html \ +- install-html-am install-info install-info-am install-man \ +- install-pdf install-pdf-am install-ps install-ps-am \ ++ install install-am install-data install-data-am install-exec \ ++ install-exec-am install-info install-info-am install-man \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ +- pdf pdf-am ps ps-am tags uninstall uninstall-am ++ pdf pdf-am ps ps-am tags uninstall uninstall-am \ ++ uninstall-info-am + + + clean-local: +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/tools/Makefile.in gnome-power-manager-2.24.0.new/tools/Makefile.in +--- gnome-power-manager-2.24.0/tools/Makefile.in 2008-11-20 18:36:55.000000000 +0100 ++++ gnome-power-manager-2.24.0.new/tools/Makefile.in 2008-11-20 18:37:30.000000000 +0100 +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.10.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,11 +14,15 @@ + + @SET_MAKE@ + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = .. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -36,7 +40,10 @@ + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ +- $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ ++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ ++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ ++ $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +@@ -50,6 +57,8 @@ + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -65,10 +74,6 @@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIR = @DATADIR@ + DATADIRNAME = @DATADIRNAME@ +@@ -80,17 +85,23 @@ + DEPDIR = @DEPDIR@ + DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ + DOCBOOK2MAN = @DOCBOOK2MAN@ ++DOCBOOK_DOCS_ENABLED_FALSE = @DOCBOOK_DOCS_ENABLED_FALSE@ ++DOCBOOK_DOCS_ENABLED_TRUE = @DOCBOOK_DOCS_ENABLED_TRUE@ + DOCDIR = @DOCDIR@ + DOC_USER_FORMATS = @DOC_USER_FORMATS@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ ++ENABLE_SK_FALSE = @ENABLE_SK_FALSE@ ++ENABLE_SK_TRUE = @ENABLE_SK_TRUE@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GDK_CFLAGS = @GDK_CFLAGS@ +@@ -114,8 +125,21 @@ + HAL_CFLAGS = @HAL_CFLAGS@ + HAL_LIBS = @HAL_LIBS@ + HAL_REQUIRED = @HAL_REQUIRED@ ++HAVE_APPLETS_FALSE = @HAVE_APPLETS_FALSE@ ++HAVE_APPLETS_TRUE = @HAVE_APPLETS_TRUE@ ++HAVE_DOCBOOK2MAN_FALSE = @HAVE_DOCBOOK2MAN_FALSE@ ++HAVE_DOCBOOK2MAN_TRUE = @HAVE_DOCBOOK2MAN_TRUE@ ++HAVE_GCONF_DEFAULTS_FALSE = @HAVE_GCONF_DEFAULTS_FALSE@ ++HAVE_GCONF_DEFAULTS_TRUE = @HAVE_GCONF_DEFAULTS_TRUE@ ++HAVE_GNOME_DOC_UTILS_FALSE = @HAVE_GNOME_DOC_UTILS_FALSE@ ++HAVE_GNOME_DOC_UTILS_TRUE = @HAVE_GNOME_DOC_UTILS_TRUE@ ++HAVE_LIBNOTIFY_FALSE = @HAVE_LIBNOTIFY_FALSE@ ++HAVE_LIBNOTIFY_TRUE = @HAVE_LIBNOTIFY_TRUE@ ++HAVE_TESTS_FALSE = @HAVE_TESTS_FALSE@ ++HAVE_TESTS_TRUE = @HAVE_TESTS_TRUE@ ++HAVE_UNIQUE_FALSE = @HAVE_UNIQUE_FALSE@ ++HAVE_UNIQUE_TRUE = @HAVE_UNIQUE_TRUE@ + HELP_DIR = @HELP_DIR@ +-INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -145,6 +169,7 @@ + INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ + INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ + INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBGLADE_REQUIRED = @LIBGLADE_REQUIRED@ + LIBGNOMEUI_REQUIRED = @LIBGNOMEUI_REQUIRED@ +@@ -157,16 +182,20 @@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBWNCK_REQUIRED = @LIBWNCK_REQUIRED@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OMF_DIR = @OMF_DIR@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -207,13 +236,10 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -225,7 +251,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -244,6 +269,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -253,11 +279,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + script_SCRIPTS = \ + gnome-power-manager-inhibit \ + gnome-power-cmd.sh \ +@@ -299,7 +322,7 @@ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + install-scriptSCRIPTS: $(script_SCRIPTS) + @$(NORMAL_INSTALL) +- test -z "$(scriptdir)" || $(MKDIR_P) "$(DESTDIR)$(scriptdir)" ++ test -z "$(scriptdir)" || $(mkdir_p) "$(DESTDIR)$(scriptdir)" + @list='$(script_SCRIPTS)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + if test -f $$d$$p; then \ +@@ -322,6 +345,10 @@ + + clean-libtool: + -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + tags: TAGS + TAGS: + +@@ -330,21 +357,22 @@ + + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -360,7 +388,7 @@ + all-am: Makefile $(SCRIPTS) + installdirs: + for dir in "$(DESTDIR)$(scriptdir)"; do \ +- test -z "$$dir" || $(MKDIR_P) "$$dir"; \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: install-am + install-exec: install-exec-am +@@ -392,7 +420,7 @@ + + distclean: distclean-am + -rm -f Makefile +-distclean-am: clean-am distclean-generic ++distclean-am: clean-am distclean-generic distclean-libtool + + dvi: dvi-am + +@@ -406,20 +434,12 @@ + + install-data-am: install-scriptSCRIPTS + +-install-dvi: install-dvi-am +- + install-exec-am: + +-install-html: install-html-am +- + install-info: install-info-am + + install-man: + +-install-pdf: install-pdf-am +- +-install-ps: install-ps-am +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -438,21 +458,18 @@ + + ps-am: + +-uninstall-am: uninstall-scriptSCRIPTS +- +-.MAKE: install-am install-strip ++uninstall-am: uninstall-info-am uninstall-scriptSCRIPTS + + .PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am html html-am info info-am install install-am \ +- install-data install-data-am install-dvi install-dvi-am \ +- install-exec install-exec-am install-html install-html-am \ +- install-info install-info-am install-man install-pdf \ +- install-pdf-am install-ps install-ps-am install-scriptSCRIPTS \ ++ install-data install-data-am install-exec install-exec-am \ ++ install-info install-info-am install-man install-scriptSCRIPTS \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ +- uninstall uninstall-am uninstall-scriptSCRIPTS ++ uninstall uninstall-am uninstall-info-am \ ++ uninstall-scriptSCRIPTS + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. --- gnome-power-manager-2.24.0.orig/debian/patches/78-xrandr-hal-fallback.patch +++ gnome-power-manager-2.24.0/debian/patches/78-xrandr-hal-fallback.patch @@ -0,0 +1,101 @@ +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/src/gpm-brightness.c gnome-power-manager-2.24.0.new/src/gpm-brightness.c +--- gnome-power-manager-2.24.0/src/gpm-brightness.c 2008-09-04 06:05:15.000000000 -0400 ++++ gnome-power-manager-2.24.0.new/src/gpm-brightness.c 2008-12-01 15:01:52.000000000 -0500 +@@ -131,7 +131,10 @@ + /* set the hardware */ + if (brightness->priv->use_xrandr) { + ret = gpm_brightness_xrandr_set (brightness->priv->xrandr, percentage, &hw_changed_local); +- goto out; ++ if (ret) ++ goto out; ++ else ++ brightness->priv->use_xrandr = FALSE; + } + if (brightness->priv->use_hal) { + ret = gpm_brightness_hal_set (brightness->priv->hal, percentage, &hw_changed_local); +@@ -179,7 +182,10 @@ + /* get the brightness from hardware -- slow */ + if (brightness->priv->use_xrandr) { + ret = gpm_brightness_xrandr_get (brightness->priv->xrandr, &percentage_local); +- goto out; ++ if (ret) ++ goto out; ++ else ++ brightness->priv->use_xrandr = FALSE; + } + if (brightness->priv->use_hal) { + ret = gpm_brightness_hal_get (brightness->priv->hal, &percentage_local); +@@ -222,7 +228,10 @@ + + if (brightness->priv->use_xrandr) { + ret = gpm_brightness_xrandr_up (brightness->priv->xrandr, &hw_changed_local); +- goto out; ++ if (ret) ++ goto out; ++ else ++ brightness->priv->use_xrandr = FALSE; + } + if (brightness->priv->use_hal) { + ret = gpm_brightness_hal_up (brightness->priv->hal, &hw_changed_local); +@@ -260,7 +269,10 @@ + + if (brightness->priv->use_xrandr) { + ret = gpm_brightness_xrandr_down (brightness->priv->xrandr, &hw_changed_local); +- goto out; ++ if (ret) ++ goto out; ++ else ++ brightness->priv->use_xrandr = FALSE; + } + if (brightness->priv->use_hal) { + ret = gpm_brightness_hal_down (brightness->priv->hal, &hw_changed_local); +@@ -400,10 +412,6 @@ + if (gpm_brightness_hal_has_hw (brightness->priv->hal)) { + brightness->priv->use_hal = TRUE; + } +- /* we want to default to only use XRANDR if available, as some hardware can use either */ +- if (brightness->priv->use_xrandr) { +- brightness->priv->use_hal = FALSE; +- } + g_signal_connect (brightness->priv->hal, "brightness-changed", + G_CALLBACK (gpm_brightness_hal_changed_cb), brightness); + g_signal_connect (brightness->priv->xrandr, "brightness-changed", +diff -Nur -x '*.orig' -x '*~' gnome-power-manager-2.24.0/src/gpm-brightness-xrandr.c gnome-power-manager-2.24.0.new/src/gpm-brightness-xrandr.c +--- gnome-power-manager-2.24.0/src/gpm-brightness-xrandr.c 2008-12-01 15:01:51.000000000 -0500 ++++ gnome-power-manager-2.24.0.new/src/gpm-brightness-xrandr.c 2008-12-01 15:02:35.000000000 -0500 +@@ -217,7 +217,7 @@ + return FALSE; + } + ret = gpm_brightness_xrandr_output_get_limits (brightness, output, &min, &max); +- if (!ret) { ++ if (!ret || min == max) { + return FALSE; + } + egg_debug ("hard value=%i, min=%i, max=%i", cur, min, max); +@@ -244,7 +244,7 @@ + return FALSE; + } + ret = gpm_brightness_xrandr_output_get_limits (brightness, output, &min, &max); +- if (!ret) { ++ if (!ret || min == max) { + return FALSE; + } + egg_debug ("hard value=%i, min=%i, max=%i", cur, min, max); +@@ -278,7 +278,7 @@ + return FALSE; + } + ret = gpm_brightness_xrandr_output_get_limits (brightness, output, &min, &max); +- if (!ret) { ++ if (!ret || min == max) { + return FALSE; + } + egg_debug ("hard value=%i, min=%i, max=%i", cur, min, max); +@@ -314,7 +314,7 @@ + return FALSE; + } + ret = gpm_brightness_xrandr_output_get_limits (brightness, output, &min, &max); +- if (!ret) { ++ if (!ret || min == max) { + return FALSE; + } +