--- klogic-1.62.orig/po/de.po
+++ klogic-1.62/po/de.po
@@ -30,11 +30,11 @@
 " press OK to delete it!"
 msgstr ""
 "Eine Datei mit diesem Namen ist bereits vorhanden\n"
-" OK druecken um diese zu ueberschreiben."
+" OK drücken um diese zu überschreiben."
 
 #: devLib.cpp:132
 msgid "unable to delete file"
-msgstr "Kann Datei nicht loeschen"
+msgstr "Kann Datei nicht löschen"
 
 #: devLib.cpp:139
 msgid "unable to access lib-file"
@@ -46,7 +46,7 @@
 
 #: devLib.cpp:151
 msgid "unknown problem accessing choosen file"
-msgstr "bei laden der datei ist ein unbekannter Fehler aufgetreten"
+msgstr "beim Laden der Datei ist ein unbekannter Fehler aufgetreten"
 
 #: devLib.cpp:203 devLib.cpp:207 devLib.cpp:211 devLib.cpp:215 devLib.cpp:219
 msgid "open library"
@@ -58,7 +58,7 @@
 
 #: devLib.cpp:208
 msgid "unable to open file for read/write"
-msgstr "Kann Datei zum lesen bzw. schreiben nicht laden"
+msgstr "Kann Datei zum Lesen bzw. Schreiben nicht laden"
 
 #: devLib.cpp:212
 msgid "library parsing error"
@@ -66,7 +66,7 @@
 
 #: devLib.cpp:216
 msgid "not enough device ID slots (1000)"
-msgstr "Nicht genung Bauteile slots"
+msgstr "Nicht genug Bauteile slots"
 
 #: devLib.cpp:220
 msgid "unknown error"
@@ -82,7 +82,7 @@
 
 #: dlgEqu.cpp:111
 msgid "final"
-msgstr "Entgueltig"
+msgstr "Entgültig"
 
 #: dlgEqu.cpp:115
 msgid "internal"
@@ -90,7 +90,7 @@
 
 #: dlgEqu.cpp:118
 msgid "temporary"
-msgstr "Temporqer"
+msgstr "Temporär"
 
 #: dlgEqu.cpp:138 dlgEqu.cpp:189 dlgPattern.cpp:39
 msgid "subjunctive"
@@ -118,7 +118,7 @@
 
 #: dlgEqu.cpp:172
 msgid "Tidy Up"
-msgstr "Aufraeumen"
+msgstr "Aufräumen"
 
 #: dlgEqu.cpp:183
 msgid "replace - with"
@@ -143,7 +143,7 @@
 #: dlgEqu.cpp:472 dlgEqu.cpp:643
 #, fuzzy
 msgid "Output names cannot contain\n"
-msgstr "Name fuer Ausgang darf nicht beinhalten"
+msgstr "Name für Ausgang darf nicht beinhalten"
 
 #: dlgEqu.cpp:474
 msgid " or "
@@ -155,7 +155,7 @@
 
 #: dlgEqu.cpp:485
 msgid "Change output name"
-msgstr "Aendern Ausgangs-Name"
+msgstr "Ändern Ausgangs-Name"
 
 #: dlgEqu.cpp:486 dlgEqu.cpp:638
 msgid "Output name already exists"
@@ -163,7 +163,7 @@
 
 #: dlgEqu.cpp:638
 msgid "Output names of equation devices must be unique"
-msgstr "Ausgangs-Namen von Gleichungen muessen eindeutig sein"
+msgstr "Ausgangs-Namen von Gleichungen müssen eindeutig sein"
 
 #: dlgEqu.cpp:777
 msgid "Substitute Equations"
@@ -180,7 +180,7 @@
 
 #: propPwr.cpp:37
 msgid "output value"
-msgstr "Ausgangs Wert"
+msgstr "Ausgangswert"
 
 #: propPwr.cpp:39 propDev.cpp:122 propSwitch.cpp:54 propGlob.cpp:90
 msgid "High"
@@ -192,7 +192,7 @@
 
 #: propDev.cpp:59
 msgid "Delay"
-msgstr "Verzoegerung"
+msgstr "Verzögerung"
 
 #: propDev.cpp:71
 msgid "display name"
@@ -200,15 +200,15 @@
 
 #: propDev.cpp:78 propGlob.cpp:106
 msgid "Size"
-msgstr "Groesse"
+msgstr "Größe"
 
 #: propDev.cpp:94
 msgid "Large Width"
-msgstr "grosse Breite"
+msgstr "große Breite"
 
 #: propDev.cpp:108
 msgid "Inverter Setting"
-msgstr "Negierer Einstellungen"
+msgstr "Negierer-Einstellungen"
 
 #: propDev.cpp:118 propGlob.cpp:86
 msgid "Undefined value"
@@ -216,7 +216,7 @@
 
 #: propDev.cpp:147
 msgid "LED Color"
-msgstr "LED Farbe"
+msgstr "LED-Farbe"
 
 #: propDev.cpp:149
 msgid "red"
@@ -240,11 +240,11 @@
 
 #: propDev.cpp:184
 msgid "Fan in"
-msgstr "Eingangs-Faecher"
+msgstr "Eingangs-Fächer"
 
 #: propDev.cpp:186
 msgid "Fan out"
-msgstr "Ausgangs-Faecher"
+msgstr "Ausgangs-Fächer"
 
 #: propDev.cpp:213
 msgid "Output always inverted"
@@ -260,7 +260,7 @@
 
 #: propDev.cpp:233
 msgid "Tristate outputs"
-msgstr "Tristate Ausgaenge"
+msgstr "Tristate-Ausgänge"
 
 #: propDev.cpp:243
 msgid "Equation Editor"
@@ -296,7 +296,7 @@
 
 #: propDev.cpp:265 propDev.cpp:279 propDev.cpp:309
 msgid "Disabled"
-msgstr "Nicht verfuegbar"
+msgstr "Nicht verfügbar"
 
 #: propDev.cpp:307
 msgid "Master FF"
@@ -304,15 +304,15 @@
 
 #: propDev.cpp:311
 msgid "Enabled"
-msgstr "Verfuegbar"
+msgstr "Verfügbar"
 
 #: propDev.cpp:327
 msgid "RAM Content"
-msgstr "RAM Inhalt"
+msgstr "RAM-Inhalt"
 
 #: propDev.cpp:333 propDev.cpp:559
 msgid "clear"
-msgstr "Loeschen"
+msgstr "Löschen"
 
 #: propDev.cpp:458 netw.cpp:1168
 msgid "Device Equation Editor"
@@ -324,7 +324,7 @@
 
 #: propSwitch.cpp:45
 msgid "select type"
-msgstr "Typ waehlen"
+msgstr "Typ wählen"
 
 #: propSwitch.cpp:47
 msgid "switch"
@@ -381,7 +381,7 @@
 
 #: xmlImport.cpp:347 xmlImport.cpp:389
 msgid "no parent net for device\n"
-msgstr "keine uebergeordnete Schaltung\n"
+msgstr "keine übergeordnete Schaltung\n"
 
 #: xmlImport.cpp:352
 #, fuzzy
@@ -458,7 +458,7 @@
 
 #: xmlImport.cpp:600
 msgid "invalid position format for wire<-->wire connection with"
-msgstr "ungueltige Position bei Verbindung"
+msgstr "ungültige Position bei Verbindung"
 
 #: xmlImport.cpp:614
 msgid "unable to establish wire<-->wire connection with"
@@ -482,17 +482,17 @@
 
 #: xmlImport.cpp:672
 msgid "for"
-msgstr "fuer"
+msgstr "für"
 
 #: xmlImport.cpp:778
 #, fuzzy
 msgid "ram error: no length\n"
-msgstr "RAM Fehler: Keine Laenge"
+msgstr "RAM-Fehler: Keine Länge"
 
 #: xmlImport.cpp:789
 #, fuzzy
 msgid "ram error: invalid length\n"
-msgstr "RAM Fehler: Ungueltige Laenge"
+msgstr "RAM-Fehler: Ungültige Länge"
 
 #: xmlImport.cpp:866
 msgid "error: tag "
@@ -532,11 +532,11 @@
 
 #: klogic.cpp:27
 msgid "file to open"
-msgstr "Zu oeffnende Datei"
+msgstr "Zu öffnende Datei"
 
 #: klogic.cpp:37
 msgid "digital circuit simulator"
-msgstr "Digitaler Schaltkreis Simulator"
+msgstr "Digitaler Schaltkreis-Simulator"
 
 #: propGlob.cpp:39
 msgid "Device Default Settings"
@@ -544,11 +544,11 @@
 
 #: propGlob.cpp:44
 msgid "Default Size"
-msgstr "Standart Groesse"
+msgstr "Standard-Größe"
 
 #: propGlob.cpp:54
 msgid "Default Delay"
-msgstr "Standart Pause"
+msgstr "Standard-Pause"
 
 #: propGlob.cpp:62
 msgid "Display Name"
@@ -556,11 +556,11 @@
 
 #: propGlob.cpp:67
 msgid "Large Sub Circuit Width"
-msgstr "Grosse Subschaltung Weite"
+msgstr "Große Subschaltung Weite"
 
 #: propGlob.cpp:72
 msgid "Outputs Inverted"
-msgstr "Ausgaenge negiert"
+msgstr "Ausgänge negiert"
 
 #: propGlob.cpp:166
 msgid "Symbol Set"
@@ -608,7 +608,7 @@
 
 #: netw.cpp:280 netw.cpp:286 netw.cpp:292
 msgid "device failure"
-msgstr "Bauteil Fehler"
+msgstr "Bauteil-Fehler"
 
 #: netw.cpp:280
 msgid ""
@@ -636,7 +636,7 @@
 
 #: netw.cpp:486 netw.cpp:491 netw.cpp:496 netw.cpp:501
 msgid "connection failure"
-msgstr "Verbindungs Fehler"
+msgstr "Verbindungsfehler"
 
 #: netw.cpp:487
 msgid "only one output per wire allowed"
@@ -644,11 +644,11 @@
 
 #: netw.cpp:492
 msgid "maximum number of inputs exeeded"
-msgstr "Die Maximale Zahl an Eingaengen ist erreicht"
+msgstr "Die maximale Zahl an Eingängen ist erreicht"
 
 #: netw.cpp:497
 msgid "maximum number of outputs exeeded"
-msgstr "Die Maximale Zahl an Ausgaengen ist erreicht"
+msgstr "Die maximale Zahl an Ausgängen ist erreicht"
 
 #: netw.cpp:502 netw.cpp:1211
 msgid "shortcut\n"
@@ -684,7 +684,7 @@
 
 #: netw.cpp:660
 msgid "add to lib"
-msgstr "Zur Bibliothek hinzufuegen"
+msgstr "Zur Bibliothek hinzufügen"
 
 #: netw.cpp:664 dlgLib.cpp:487 dlgLib.cpp:518
 msgid "remove"
@@ -692,14 +692,14 @@
 
 #: netw.cpp:772
 msgid "remove device"
-msgstr "Bauteil loeschen"
+msgstr "Bauteil löschen"
 
 #: netw.cpp:773
 msgid "remove entire sub-circuit?"
 msgstr ""
-"Wollen Sie die Subschaltung loeschen?\n"
+"Wollen Sie die Subschaltung löschen?\n"
 "\n"
-"Alle Schatungen in diesem Bauteil gehen dabei verloren.\n"
+"Alle Schaltungen in diesem Bauteil gehen dabei verloren.\n"
 " "
 
 #: netw.cpp:800
@@ -708,7 +708,7 @@
 
 #: netw.cpp:814
 msgid "text label"
-msgstr "Text Feld"
+msgstr "Text-Feld"
 
 #: netw.cpp:825
 msgid "power device properties"
@@ -779,7 +779,7 @@
 
 #: netw.cpp:1146 netw.cpp:1155
 msgid "Parse circuit equations"
-msgstr "Untersuche Schaltungs Gleichungen"
+msgstr "Untersuche Schaltungsgleichungen"
 
 #: netw.cpp:1147
 msgid ""
@@ -801,7 +801,7 @@
 
 #: netw.cpp:1210
 msgid "runtime error"
-msgstr "Fehler beim aufuehren (Runtime Error)"
+msgstr "Fehler beim Ausführen (Runtime Error)"
 
 #: mainw.cpp:51
 msgid "new.circuit"
@@ -813,14 +813,14 @@
 
 #: mainw.cpp:161
 msgid "circuit has changed.."
-msgstr "Schaltung veraendert"
+msgstr "Schaltung verändert"
 
 #: mainw.cpp:162
 msgid "Save current changes?"
 msgstr ""
 "Sie haben die Schaltung seit dem letzen Speichern verändert.\n"
 "\n"
-"Wollen Sie die Schaltung nun Speichern?\n"
+"Wollen Sie die Schaltung nun speichern?\n"
 " "
 
 #: mainw.cpp:184
@@ -829,11 +829,11 @@
 
 #: mainw.cpp:190 mainw.cpp:466
 msgid "Bus Connector"
-msgstr "Bus Anschluss"
+msgstr "Bus-Anschluss"
 
 #: mainw.cpp:195
 msgid "select groups"
-msgstr "Gruppe makkieren"
+msgstr "Gruppe markieren"
 
 #: mainw.cpp:205
 msgid "new sub-circuit"
@@ -925,7 +925,7 @@
 
 #: mainw.cpp:355
 msgid "single step simulation"
-msgstr "Schritt fuer Schritt Simulation"
+msgstr "Schritt-für-Schritt-Simulation"
 
 #: mainw.cpp:360
 msgid "simulate"
@@ -957,7 +957,7 @@
 
 #: mainw.cpp:443
 msgid "&Selection Mode"
-msgstr "&Gruppe makkieren"
+msgstr "&Gruppe markieren"
 
 #: mainw.cpp:446
 msgid "&Equation"
@@ -1037,7 +1037,7 @@
 
 #: mainw.cpp:497
 msgid "&Step through"
-msgstr "&Schritt fuer Schritt Simulation"
+msgstr "&Schritt-für-Schritt-Simulation"
 
 #: mainw.cpp:500 mainw.cpp:1206
 msgid "Show &Graph"
@@ -1045,7 +1045,7 @@
 
 #: mainw.cpp:503
 msgid "Show &Equations"
-msgstr "Gleischungseditor"
+msgstr "Gleichungseditor"
 
 #: mainw.cpp:507
 msgid "&Global Settings "
@@ -1053,7 +1053,7 @@
 
 #: mainw.cpp:508
 msgid "&Hide Toolbar"
-msgstr "&Werkzeugleiste aublenden"
+msgstr "&Werkzeugleiste ausblenden"
 
 #: mainw.cpp:513
 msgid "maintenance"
@@ -1077,7 +1077,7 @@
 
 #: mainw.cpp:773
 msgid "library maintenance"
-msgstr "Bibliotheken Verwaltung"
+msgstr "Bibliotheken-Verwaltung"
 
 #: mainw.cpp:891
 msgid "Hide &Toolbar"
@@ -1113,7 +1113,7 @@
 
 #: dlgLib.cpp:120 dlgLib.cpp:496
 msgid "Choose a Device"
-msgstr "Waehle Bauteil"
+msgstr "Wähle Bauteil"
 
 #: dlgLib.cpp:127
 msgid "Creation"
@@ -1121,7 +1121,7 @@
 
 #: dlgLib.cpp:134
 msgid "Last Update"
-msgstr "Veraendert am"
+msgstr "Verändert am"
 
 #: dlgLib.cpp:168
 msgid "Image Path"
@@ -1141,11 +1141,11 @@
 
 #: dlgLib.cpp:246 dlgLib.cpp:328
 msgid "close library"
-msgstr "Bibliothek schliessen"
+msgstr "Bibliothek schließen"
 
 #: dlgLib.cpp:247 dlgLib.cpp:329
 msgid "save changes in "
-msgstr "Aenderungen speichern in"
+msgstr "Änderungen speichern in"
 
 #: dlgLib.cpp:251 dlgLib.cpp:333
 msgid "save library"
@@ -1166,19 +1166,19 @@
 #: dlgLib.cpp:454
 msgid "choose a library first!"
 msgstr ""
-"Es wurde kein Bibliothek ausgewählt.\n"
+"Es wurde keine Bibliothek ausgewählt.\n"
 "\n"
-"Bitte Laden bzw. erstellen Sie eine neue Bibliothek (oben).\n"
+"Bitte laden bzw. erstellen Sie eine neue Bibliothek (oben).\n"
 " "
 
 #: dlgLib.cpp:464 dlgLib.cpp:469
 msgid "add device"
-msgstr "Bauteil hinzufuegen"
+msgstr "Bauteil hinzufügen"
 
 #: dlgLib.cpp:465
 msgid "device name already used"
-msgstr "Der name des bauteils ist bereits vergeben"
+msgstr "Der Name des Bauteils ist bereits vergeben"
 
 #: dlgLib.cpp:470
 msgid "no device id slots left .."
-msgstr "Es sind keine Bauteile Slots mehr da."
+msgstr "Es sind keine Bauteile-Slots mehr da."
--- klogic-1.62.orig/admin/config.guess
+++ klogic-1.62/admin/config.guess
@@ -1,9 +1,9 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002 Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
 
-timestamp='2002-10-21'
+timestamp='2005-08-03'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -17,13 +17,15 @@
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
 #
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
 # the same distribution terms that you use for the rest of that program.
 
+
 # Originally written by Per Bothner <per@bothner.com>.
 # Please send patches to <config-patches@gnu.org>.  Submit a context
 # diff and a properly formatted ChangeLog entry.
@@ -53,7 +55,7 @@
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
@@ -66,11 +68,11 @@
 while test $# -gt 0 ; do
   case $1 in
     --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit 0 ;;
+       echo "$timestamp" ; exit ;;
     --version | -v )
-       echo "$version" ; exit 0 ;;
+       echo "$version" ; exit ;;
     --help | --h* | -h )
-       echo "$usage"; exit 0 ;;
+       echo "$usage"; exit ;;
     -- )     # Stop option processing
        shift; break ;;
     - )	# Use stdin as input.
@@ -98,14 +100,18 @@
 # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
 # use `HOST_CC' if defined, but it is deprecated.
 
-# This shell variable is my proudest work .. or something. --bje
+# Portable tmp directory creation inspired by the Autoconf team.
 
-set_cc_for_build='tmpdir=${TMPDIR-/tmp}/config-guess-$$ ;
-(old=`umask` && umask 077 && mkdir $tmpdir && umask $old && unset old)
-   || (echo "$me: cannot create $tmpdir" >&2 && exit 1) ;
-dummy=$tmpdir/dummy ;
-files="$dummy.c $dummy.o $dummy.rel $dummy" ;
-trap '"'"'rm -f $files; rmdir $tmpdir; exit 1'"'"' 1 2 15 ;
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
 case $CC_FOR_BUILD,$HOST_CC,$CC in
  ,,)    echo "int x;" > $dummy.c ;
 	for c in cc gcc c89 c99 ; do
@@ -113,15 +119,13 @@
 	     CC_FOR_BUILD="$c"; break ;
 	  fi ;
 	done ;
-	rm -f $files ;
 	if test x"$CC_FOR_BUILD" = x ; then
 	  CC_FOR_BUILD=no_compiler_found ;
 	fi
 	;;
  ,,*)   CC_FOR_BUILD=$CC ;;
  ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
-esac ;
-unset files'
+esac ; set_cc_for_build= ;'
 
 # This is needed to find uname on a Pyramid OSx when run in the BSD universe.
 # (ghazi@noc.rutgers.edu 1994-08-24)
@@ -178,144 +182,125 @@
 		;;
 	esac
 	# The OS release
-	release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+	# Debian GNU/NetBSD machines have a different userland, and
+	# thus, need a distinct triplet. However, they do not need
+	# kernel version information, so it can be replaced with a
+	# suitable tag, in the style of linux-gnu.
+	case "${UNAME_VERSION}" in
+	    Debian*)
+		release='-gnu'
+		;;
+	    *)
+		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+		;;
+	esac
 	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
 	# contains redundant information, the shorter form:
 	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
 	echo "${machine}-${os}${release}"
-	exit 0 ;;
-    amiga:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    arc:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    hp300:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mac68k:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    macppc:OpenBSD:*:*)
-	echo powerpc-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvme68k:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvme88k:OpenBSD:*:*)
-	echo m88k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvmeppc:OpenBSD:*:*)
-	echo powerpc-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    pmax:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    sgi:OpenBSD:*:*)
-	echo mipseb-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    sun3:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    wgrisc:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:OpenBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
+	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+	exit ;;
+    *:ekkoBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+	exit ;;
+    macppc:MirBSD:*:*)
+	echo powerppc-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    *:MirBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
     alpha:OSF1:*:*)
-	if test $UNAME_RELEASE = "V4.0"; then
+	case $UNAME_RELEASE in
+	*4.0)
 		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
-	fi
+		;;
+	*5.*)
+	        UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+		;;
+	esac
+	# According to Compaq, /usr/sbin/psrinfo has been available on
+	# OSF/1 and Tru64 systems produced since 1995.  I hope that
+	# covers most systems running today.  This code pipes the CPU
+	# types through head -n 1, so we only detect the type of CPU 0.
+	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+	case "$ALPHA_CPU_TYPE" in
+	    "EV4 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV4.5 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "LCA4 (21066/21068)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV5 (21164)")
+		UNAME_MACHINE="alphaev5" ;;
+	    "EV5.6 (21164A)")
+		UNAME_MACHINE="alphaev56" ;;
+	    "EV5.6 (21164PC)")
+		UNAME_MACHINE="alphapca56" ;;
+	    "EV5.7 (21164PC)")
+		UNAME_MACHINE="alphapca57" ;;
+	    "EV6 (21264)")
+		UNAME_MACHINE="alphaev6" ;;
+	    "EV6.7 (21264A)")
+		UNAME_MACHINE="alphaev67" ;;
+	    "EV6.8CB (21264C)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8AL (21264B)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8CX (21264D)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.9A (21264/EV69A)")
+		UNAME_MACHINE="alphaev69" ;;
+	    "EV7 (21364)")
+		UNAME_MACHINE="alphaev7" ;;
+	    "EV7.9 (21364A)")
+		UNAME_MACHINE="alphaev79" ;;
+	esac
+	# A Pn.n version is a patched version.
 	# A Vn.n version is a released version.
 	# A Tn.n version is a released field test version.
 	# A Xn.n version is an unreleased experimental baselevel.
 	# 1.2 uses "1.2" for uname -r.
-	eval $set_cc_for_build
-	cat <<EOF >$dummy.s
-	.data
-\$Lformat:
-	.byte 37,100,45,37,120,10,0	# "%d-%x\n"
-
-	.text
-	.globl main
-	.align 4
-	.ent main
-main:
-	.frame \$30,16,\$26,0
-	ldgp \$29,0(\$27)
-	.prologue 1
-	.long 0x47e03d80 # implver \$0
-	lda \$2,-1
-	.long 0x47e20c21 # amask \$2,\$1
-	lda \$16,\$Lformat
-	mov \$0,\$17
-	not \$1,\$18
-	jsr \$26,printf
-	ldgp \$29,0(\$26)
-	mov 0,\$16
-	jsr \$26,exit
-	.end main
-EOF
-	$CC_FOR_BUILD -o $dummy $dummy.s 2>/dev/null
-	if test "$?" = 0 ; then
-		case `$dummy` in
-			0-0)
-				UNAME_MACHINE="alpha"
-				;;
-			1-0)
-				UNAME_MACHINE="alphaev5"
-				;;
-			1-1)
-				UNAME_MACHINE="alphaev56"
-				;;
-			1-101)
-				UNAME_MACHINE="alphapca56"
-				;;
-			2-303)
-				UNAME_MACHINE="alphaev6"
-				;;
-			2-307)
-				UNAME_MACHINE="alphaev67"
-				;;
-			2-1307)
-				UNAME_MACHINE="alphaev68"
-				;;
-			3-1307)
-				UNAME_MACHINE="alphaev7"
-				;;
-		esac
-	fi
-	rm -f $dummy.s $dummy && rmdir $tmpdir
-	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-	exit 0 ;;
+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	exit ;;
     Alpha\ *:Windows_NT*:*)
 	# How do we know it's Interix rather than the generic POSIX subsystem?
 	# Should we change UNAME_MACHINE based on the output of uname instead
 	# of the specific Alpha model?
 	echo alpha-pc-interix
-	exit 0 ;;
+	exit ;;
     21064:Windows_NT:50:3)
 	echo alpha-dec-winnt3.5
-	exit 0 ;;
+	exit ;;
     Amiga*:UNIX_System_V:4.0:*)
 	echo m68k-unknown-sysv4
-	exit 0;;
+	exit ;;
     *:[Aa]miga[Oo][Ss]:*:*)
 	echo ${UNAME_MACHINE}-unknown-amigaos
-	exit 0 ;;
+	exit ;;
     *:[Mm]orph[Oo][Ss]:*:*)
 	echo ${UNAME_MACHINE}-unknown-morphos
-	exit 0 ;;
+	exit ;;
     *:OS/390:*:*)
 	echo i370-ibm-openedition
-	exit 0 ;;
+	exit ;;
+    *:z/VM:*:*)
+	echo s390-ibm-zvmoe
+	exit ;;
+    *:OS400:*:*)
+        echo powerpc-ibm-os400
+	exit ;;
     arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
 	echo arm-acorn-riscix${UNAME_RELEASE}
-	exit 0;;
+	exit ;;
+    arm:riscos:*:*|arm:RISCOS:*:*)
+	echo arm-unknown-riscos
+	exit ;;
     SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
 	echo hppa1.1-hitachi-hiuxmpp
-	exit 0;;
+	exit ;;
     Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
 	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
 	if test "`(/bin/universe) 2>/dev/null`" = att ; then
@@ -323,29 +308,32 @@
 	else
 		echo pyramid-pyramid-bsd
 	fi
-	exit 0 ;;
+	exit ;;
     NILE*:*:*:dcosx)
 	echo pyramid-pyramid-svr4
-	exit 0 ;;
-    DRS?6000:UNIX_SV:4.2*:7*)
+	exit ;;
+    DRS?6000:unix:4.0:6*)
+	echo sparc-icl-nx6
+	exit ;;
+    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
 	case `/usr/bin/uname -p` in
-	    sparc) echo sparc-icl-nx7 && exit 0 ;;
+	    sparc) echo sparc-icl-nx7; exit ;;
 	esac ;;
     sun4H:SunOS:5.*:*)
 	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
+	exit ;;
     sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
 	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
+	exit ;;
     i86pc:SunOS:5.*:*)
 	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
+	exit ;;
     sun4*:SunOS:6*:*)
 	# According to config.sub, this is the proper way to canonicalize
 	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
 	# it's likely to be more like Solaris than SunOS4.
 	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
+	exit ;;
     sun4*:SunOS:*:*)
 	case "`/usr/bin/arch -k`" in
 	    Series*|S4*)
@@ -354,10 +342,10 @@
 	esac
 	# Japanese Language versions have a version number like `4.1.3-JL'.
 	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
-	exit 0 ;;
+	exit ;;
     sun3*:SunOS:*:*)
 	echo m68k-sun-sunos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     sun*:*:4.2BSD:*)
 	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
 	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
@@ -369,10 +357,10 @@
 		echo sparc-sun-sunos${UNAME_RELEASE}
 		;;
 	esac
-	exit 0 ;;
+	exit ;;
     aushp:SunOS:*:*)
 	echo sparc-auspex-sunos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     # The situation for MiNT is a little confusing.  The machine name
     # can be virtually everything (everything which is not
     # "atarist" or "atariste" at least should have a processor
@@ -383,37 +371,40 @@
     # be no problem.
     atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
         echo m68k-atari-mint${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
 	echo m68k-atari-mint${UNAME_RELEASE}
-        exit 0 ;;
+        exit ;;
     *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
         echo m68k-atari-mint${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
         echo m68k-milan-mint${UNAME_RELEASE}
-        exit 0 ;;
+        exit ;;
     hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
         echo m68k-hades-mint${UNAME_RELEASE}
-        exit 0 ;;
+        exit ;;
     *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
         echo m68k-unknown-mint${UNAME_RELEASE}
-        exit 0 ;;
+        exit ;;
+    m68k:machten:*:*)
+	echo m68k-apple-machten${UNAME_RELEASE}
+	exit ;;
     powerpc:machten:*:*)
 	echo powerpc-apple-machten${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     RISC*:Mach:*:*)
 	echo mips-dec-mach_bsd4.3
-	exit 0 ;;
+	exit ;;
     RISC*:ULTRIX:*:*)
 	echo mips-dec-ultrix${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     VAX*:ULTRIX*:*:*)
 	echo vax-dec-ultrix${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     2020:CLIX:*:* | 2430:CLIX:*:*)
 	echo clipper-intergraph-clix${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     mips:*:*:UMIPS | mips:*:*:RISCos)
 	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
@@ -437,33 +428,33 @@
 	  exit (-1);
 	}
 EOF
-	$CC_FOR_BUILD -o $dummy $dummy.c \
-	  && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
-	  && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0
-	rm -f $dummy.c $dummy && rmdir $tmpdir
+	$CC_FOR_BUILD -o $dummy $dummy.c &&
+	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+	  SYSTEM_NAME=`$dummy $dummyarg` &&
+	    { echo "$SYSTEM_NAME"; exit; }
 	echo mips-mips-riscos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     Motorola:PowerMAX_OS:*:*)
 	echo powerpc-motorola-powermax
-	exit 0 ;;
+	exit ;;
     Motorola:*:4.3:PL8-*)
 	echo powerpc-harris-powermax
-	exit 0 ;;
-    Night_Hawk:*:*:PowerMAX_OS)
+	exit ;;
+    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
 	echo powerpc-harris-powermax
-	exit 0 ;;
+	exit ;;
     Night_Hawk:Power_UNIX:*:*)
 	echo powerpc-harris-powerunix
-	exit 0 ;;
+	exit ;;
     m88k:CX/UX:7*:*)
 	echo m88k-harris-cxux7
-	exit 0 ;;
+	exit ;;
     m88k:*:4*:R4*)
 	echo m88k-motorola-sysv4
-	exit 0 ;;
+	exit ;;
     m88k:*:3*:R3*)
 	echo m88k-motorola-sysv3
-	exit 0 ;;
+	exit ;;
     AViiON:dgux:*:*)
         # DG/UX returns AViiON for all architectures
         UNAME_PROCESSOR=`/usr/bin/uname -p`
@@ -479,29 +470,29 @@
 	else
 	    echo i586-dg-dgux${UNAME_RELEASE}
 	fi
- 	exit 0 ;;
+ 	exit ;;
     M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
 	echo m88k-dolphin-sysv3
-	exit 0 ;;
+	exit ;;
     M88*:*:R3*:*)
 	# Delta 88k system running SVR3
 	echo m88k-motorola-sysv3
-	exit 0 ;;
+	exit ;;
     XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
 	echo m88k-tektronix-sysv3
-	exit 0 ;;
+	exit ;;
     Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
 	echo m68k-tektronix-bsd
-	exit 0 ;;
+	exit ;;
     *:IRIX*:*:*)
 	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
-	exit 0 ;;
+	exit ;;
     ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
-	echo romp-ibm-aix      # uname -m gives an 8 hex-code CPU id
-	exit 0 ;;              # Note that: echo "'`uname -s`'" gives 'AIX '
+	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
+	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
     i*86:AIX:*:*)
 	echo i386-ibm-aix
-	exit 0 ;;
+	exit ;;
     ia64:AIX:*:*)
 	if [ -x /usr/bin/oslevel ] ; then
 		IBM_REV=`/usr/bin/oslevel`
@@ -509,7 +500,7 @@
 		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
 	fi
 	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
-	exit 0 ;;
+	exit ;;
     *:AIX:2:3)
 	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
 		eval $set_cc_for_build
@@ -524,15 +515,18 @@
 			exit(0);
 			}
 EOF
-		$CC_FOR_BUILD -o $dummy $dummy.c && $dummy && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0
-		rm -f $dummy.c $dummy && rmdir $tmpdir
-		echo rs6000-ibm-aix3.2.5
+		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+		then
+			echo "$SYSTEM_NAME"
+		else
+			echo rs6000-ibm-aix3.2.5
+		fi
 	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
 		echo rs6000-ibm-aix3.2.4
 	else
 		echo rs6000-ibm-aix3.2
 	fi
-	exit 0 ;;
+	exit ;;
     *:AIX:*:[45])
 	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
 	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
@@ -546,28 +540,28 @@
 		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
 	fi
 	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
-	exit 0 ;;
+	exit ;;
     *:AIX:*:*)
 	echo rs6000-ibm-aix
-	exit 0 ;;
+	exit ;;
     ibmrt:4.4BSD:*|romp-ibm:BSD:*)
 	echo romp-ibm-bsd4.4
-	exit 0 ;;
+	exit ;;
     ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
 	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
-	exit 0 ;;                           # report: romp-ibm BSD 4.3
+	exit ;;                             # report: romp-ibm BSD 4.3
     *:BOSX:*:*)
 	echo rs6000-bull-bosx
-	exit 0 ;;
+	exit ;;
     DPX/2?00:B.O.S.:*:*)
 	echo m68k-bull-sysv3
-	exit 0 ;;
+	exit ;;
     9000/[34]??:4.3bsd:1.*:*)
 	echo m68k-hp-bsd
-	exit 0 ;;
+	exit ;;
     hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
 	echo m68k-hp-bsd4.4
-	exit 0 ;;
+	exit ;;
     9000/[34678]??:HP-UX:*:*)
 	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
 	case "${UNAME_MACHINE}" in
@@ -624,16 +618,36 @@
               }
 EOF
 		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
-		    if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi
-		    rm -f $dummy.c $dummy && rmdir $tmpdir
+		    test -z "$HP_ARCH" && HP_ARCH=hppa
 		fi ;;
 	esac
+	if [ ${HP_ARCH} = "hppa2.0w" ]
+	then
+	    eval $set_cc_for_build
+
+	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
+	    # generating 64-bit code.  GNU and HP use different nomenclature:
+	    #
+	    # $ CC_FOR_BUILD=cc ./config.guess
+	    # => hppa2.0w-hp-hpux11.23
+	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+	    # => hppa64-hp-hpux11.23
+
+	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+		grep __LP64__ >/dev/null
+	    then
+		HP_ARCH="hppa2.0w"
+	    else
+		HP_ARCH="hppa64"
+	    fi
+	fi
 	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
-	exit 0 ;;
+	exit ;;
     ia64:HP-UX:*:*)
 	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
 	echo ia64-hp-hpux${HPUX_REV}
-	exit 0 ;;
+	exit ;;
     3050*:HI-UX:*:*)
 	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
@@ -661,146 +675,166 @@
 	  exit (0);
 	}
 EOF
-	$CC_FOR_BUILD -o $dummy $dummy.c && $dummy && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0
-	rm -f $dummy.c $dummy && rmdir $tmpdir
+	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+		{ echo "$SYSTEM_NAME"; exit; }
 	echo unknown-hitachi-hiuxwe2
-	exit 0 ;;
+	exit ;;
     9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
 	echo hppa1.1-hp-bsd
-	exit 0 ;;
+	exit ;;
     9000/8??:4.3bsd:*:*)
 	echo hppa1.0-hp-bsd
-	exit 0 ;;
+	exit ;;
     *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
 	echo hppa1.0-hp-mpeix
-	exit 0 ;;
+	exit ;;
     hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
 	echo hppa1.1-hp-osf
-	exit 0 ;;
+	exit ;;
     hp8??:OSF1:*:*)
 	echo hppa1.0-hp-osf
-	exit 0 ;;
+	exit ;;
     i*86:OSF1:*:*)
 	if [ -x /usr/sbin/sysversion ] ; then
 	    echo ${UNAME_MACHINE}-unknown-osf1mk
 	else
 	    echo ${UNAME_MACHINE}-unknown-osf1
 	fi
-	exit 0 ;;
+	exit ;;
     parisc*:Lites*:*:*)
 	echo hppa1.1-hp-lites
-	exit 0 ;;
+	exit ;;
     C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
 	echo c1-convex-bsd
-        exit 0 ;;
+        exit ;;
     C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
 	if getsysinfo -f scalar_acc
 	then echo c32-convex-bsd
 	else echo c2-convex-bsd
 	fi
-        exit 0 ;;
+        exit ;;
     C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
 	echo c34-convex-bsd
-        exit 0 ;;
+        exit ;;
     C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
 	echo c38-convex-bsd
-        exit 0 ;;
+        exit ;;
     C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
 	echo c4-convex-bsd
-        exit 0 ;;
+        exit ;;
     CRAY*Y-MP:*:*:*)
 	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
+	exit ;;
     CRAY*[A-Z]90:*:*:*)
 	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
 	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
 	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
 	      -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
+	exit ;;
     CRAY*TS:*:*:*)
 	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
-    CRAY*T3D:*:*:*)
-	echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
+	exit ;;
     CRAY*T3E:*:*:*)
 	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
+	exit ;;
     CRAY*SV1:*:*:*)
 	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
+	exit ;;
+    *:UNICOS/mp:*:*)
+	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
     F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
 	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
         FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
         FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
         echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-        exit 0 ;;
+        exit ;;
+    5000:UNIX_System_V:4.*:*)
+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+        FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+        echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
     i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
 	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     sparc*:BSD/OS:*:*)
 	echo sparc-unknown-bsdi${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:BSD/OS:*:*)
 	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:FreeBSD:*:*)
-	# Determine whether the default compiler uses glibc.
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#include <features.h>
-	#if __GLIBC__ >= 2
-	LIBC=gnu
-	#else
-	LIBC=
-	#endif
-EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
-	rm -f $dummy.c && rmdir $tmpdir
-	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC}
-	exit 0 ;;
+	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit ;;
     i*:CYGWIN*:*)
 	echo ${UNAME_MACHINE}-pc-cygwin
-	exit 0 ;;
+	exit ;;
     i*:MINGW*:*)
 	echo ${UNAME_MACHINE}-pc-mingw32
-	exit 0 ;;
+	exit ;;
+    i*:windows32*:*)
+    	# uname -m includes "-pc" on this system.
+    	echo ${UNAME_MACHINE}-mingw32
+	exit ;;
     i*:PW*:*)
 	echo ${UNAME_MACHINE}-pc-pw32
-	exit 0 ;;
-    x86:Interix*:3*)
-	echo i386-pc-interix3
-	exit 0 ;;
+	exit ;;
+    x86:Interix*:[34]*)
+	echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//'
+	exit ;;
+    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+	echo i${UNAME_MACHINE}-pc-mks
+	exit ;;
     i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
 	# How do we know it's Interix rather than the generic POSIX subsystem?
 	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
 	# UNAME_MACHINE based on the output of uname instead of i386?
-	echo i386-pc-interix
-	exit 0 ;;
+	echo i586-pc-interix
+	exit ;;
     i*:UWIN*:*)
 	echo ${UNAME_MACHINE}-pc-uwin
-	exit 0 ;;
+	exit ;;
+    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+	echo x86_64-unknown-cygwin
+	exit ;;
     p*:CYGWIN*:*)
 	echo powerpcle-unknown-cygwin
-	exit 0 ;;
+	exit ;;
     prep*:SunOS:5.*:*)
 	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
+	exit ;;
     *:GNU:*:*)
+	# the GNU system
 	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
-	exit 0 ;;
+	exit ;;
+    *:GNU/*:*:*)
+	# other systems with GNU libc and userland
+	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+	exit ;;
     i*86:Minix:*:*)
 	echo ${UNAME_MACHINE}-pc-minix
-	exit 0 ;;
+	exit ;;
     arm*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
+    cris:Linux:*:*)
+	echo cris-axis-linux-gnu
+	exit ;;
+    crisv32:Linux:*:*)
+	echo crisv32-axis-linux-gnu
+	exit ;;
+    frv:Linux:*:*)
+    	echo frv-unknown-linux-gnu
+	exit ;;
     ia64:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
+    m32r*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
     m68*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
     mips:Linux:*:*)
 	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
@@ -818,15 +852,36 @@
 	#endif
 EOF
 	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
-	rm -f $dummy.c && rmdir $tmpdir
-	test x"${CPU}" != x && echo "${CPU}-pc-linux-gnu" && exit 0
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	;;
+    mips64:Linux:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#undef CPU
+	#undef mips64
+	#undef mips64el
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	CPU=mips64el
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	CPU=mips64
+	#else
+	CPU=
+	#endif
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
 	;;
+    or32:Linux:*:*)
+	echo or32-unknown-linux-gnu
+	exit ;;
     ppc:Linux:*:*)
 	echo powerpc-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
     ppc64:Linux:*:*)
 	echo powerpc64-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
     alpha:Linux:*:*)
 	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
 	  EV5)   UNAME_MACHINE=alphaev5 ;;
@@ -840,7 +895,7 @@
 	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
 	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
 	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
-	exit 0 ;;
+	exit ;;
     parisc:Linux:*:* | hppa:Linux:*:*)
 	# Look for CPU level
 	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
@@ -848,22 +903,25 @@
 	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
 	  *)    echo hppa-unknown-linux-gnu ;;
 	esac
-	exit 0 ;;
+	exit ;;
     parisc64:Linux:*:* | hppa64:Linux:*:*)
 	echo hppa64-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
     s390:Linux:*:* | s390x:Linux:*:*)
 	echo ${UNAME_MACHINE}-ibm-linux
-	exit 0 ;;
+	exit ;;
+    sh64*:Linux:*:*)
+    	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
     sh*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
     sparc:Linux:*:* | sparc64:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
     x86_64:Linux:*:*)
 	echo x86_64-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
     i*86:Linux:*:*)
 	# The BFD linker knows what the default object file format is, so
 	# first see if it will tell us. cd to the root directory to prevent
@@ -881,15 +939,15 @@
 		;;
 	  a.out-i386-linux)
 		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
-		exit 0 ;;
+		exit ;;
 	  coff-i386)
 		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
-		exit 0 ;;
+		exit ;;
 	  "")
 		# Either a pre-BFD a.out linker (linux-gnuoldld) or
 		# one that does not give us useful --help.
 		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
-		exit 0 ;;
+		exit ;;
 	esac
 	# Determine whether the default compiler is a.out or elf
 	eval $set_cc_for_build
@@ -912,18 +970,23 @@
 	LIBC=gnuaout
 	#endif
 	#endif
+	#ifdef __dietlibc__
+	LIBC=dietlibc
+	#endif
 EOF
 	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
-	rm -f $dummy.c && rmdir $tmpdir
-	test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0
-	test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
+	test x"${LIBC}" != x && {
+		echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+		exit
+	}
+	test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
 	;;
     i*86:DYNIX/ptx:4*:*)
 	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
 	# earlier versions are messed up and put the nodename in both
 	# sysname and nodename.
 	echo i386-sequent-sysv4
-	exit 0 ;;
+	exit ;;
     i*86:UNIX_SV:4.2MP:2.*)
         # Unixware is an offshoot of SVR4, but it has its own version
         # number series starting with 2...
@@ -931,7 +994,27 @@
 	# I just have to hope.  -- rms.
         # Use sysv4.2uw... so that sysv4* matches it.
 	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
-	exit 0 ;;
+	exit ;;
+    i*86:OS/2:*:*)
+	# If we were able to find `uname', then EMX Unix compatibility
+	# is probably installed.
+	echo ${UNAME_MACHINE}-pc-os2-emx
+	exit ;;
+    i*86:XTS-300:*:STOP)
+	echo ${UNAME_MACHINE}-unknown-stop
+	exit ;;
+    i*86:atheos:*:*)
+	echo ${UNAME_MACHINE}-unknown-atheos
+	exit ;;
+    i*86:syllable:*:*)
+	echo ${UNAME_MACHINE}-pc-syllable
+	exit ;;
+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
+	echo i386-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    i*86:*DOS:*:*)
+	echo ${UNAME_MACHINE}-pc-msdosdjgpp
+	exit ;;
     i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
 	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
 	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
@@ -939,15 +1022,16 @@
 	else
 		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
 	fi
-	exit 0 ;;
-    i*86:*:5:[78]*)
+	exit ;;
+    i*86:*:5:[678]*)
+    	# UnixWare 7.x, OpenUNIX and OpenServer 6.
 	case `/bin/uname -X | grep "^Machine"` in
 	    *486*)	     UNAME_MACHINE=i486 ;;
 	    *Pentium)	     UNAME_MACHINE=i586 ;;
 	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
 	esac
 	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
-	exit 0 ;;
+	exit ;;
     i*86:*:3.2:*)
 	if test -f /usr/options/cb.name; then
 		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
@@ -965,76 +1049,73 @@
 	else
 		echo ${UNAME_MACHINE}-pc-sysv32
 	fi
-	exit 0 ;;
-    i*86:*DOS:*:*)
-	echo ${UNAME_MACHINE}-pc-msdosdjgpp
-	exit 0 ;;
+	exit ;;
     pc:*:*:*)
 	# Left here for compatibility:
         # uname -m prints for DJGPP always 'pc', but it prints nothing about
         # the processor, so we play safe by assuming i386.
 	echo i386-pc-msdosdjgpp
-        exit 0 ;;
+        exit ;;
     Intel:Mach:3*:*)
 	echo i386-pc-mach3
-	exit 0 ;;
+	exit ;;
     paragon:*:*:*)
 	echo i860-intel-osf1
-	exit 0 ;;
+	exit ;;
     i860:*:4.*:*) # i860-SVR4
 	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
 	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
 	else # Add other i860-SVR4 vendors below as they are discovered.
 	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
 	fi
-	exit 0 ;;
+	exit ;;
     mini*:CTIX:SYS*5:*)
 	# "miniframe"
 	echo m68010-convergent-sysv
-	exit 0 ;;
+	exit ;;
     mc68k:UNIX:SYSTEM5:3.51m)
 	echo m68k-convergent-sysv
-	exit 0 ;;
-    M68*:*:R3V[567]*:*)
-	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
-    3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0)
+	exit ;;
+    M680?0:D-NIX:5.3:*)
+	echo m68k-diab-dnix
+	exit ;;
+    M68*:*:R3V[5678]*:*)
+	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
 	OS_REL=''
 	test -r /etc/.relid \
 	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
 	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	  && echo i486-ncr-sysv4.3${OS_REL} && exit 0
+	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
 	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-	  && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
+	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
     3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
         /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-          && echo i486-ncr-sysv4 && exit 0 ;;
+          && { echo i486-ncr-sysv4; exit; } ;;
     m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
 	echo m68k-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     mc68030:UNIX_System_V:4.*:*)
 	echo m68k-atari-sysv4
-	exit 0 ;;
-    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
-	echo i386-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     TSUNAMI:LynxOS:2.*:*)
 	echo sparc-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     rs6000:LynxOS:2.*:*)
 	echo rs6000-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
 	echo powerpc-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     SM[BE]S:UNIX_SV:*:*)
 	echo mips-dde-sysv${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     RM*:ReliantUNIX-*:*:*)
 	echo mips-sni-sysv4
-	exit 0 ;;
+	exit ;;
     RM*:SINIX-*:*:*)
 	echo mips-sni-sysv4
-	exit 0 ;;
+	exit ;;
     *:SINIX-*:*:*)
 	if uname -p 2>/dev/null >/dev/null ; then
 		UNAME_MACHINE=`(uname -p) 2>/dev/null`
@@ -1042,64 +1123,73 @@
 	else
 		echo ns32k-sni-sysv
 	fi
-	exit 0 ;;
+	exit ;;
     PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
                       # says <Richard.M.Bartel@ccMail.Census.GOV>
         echo i586-unisys-sysv4
-        exit 0 ;;
+        exit ;;
     *:UNIX_System_V:4*:FTX*)
 	# From Gerald Hewes <hewes@openmarket.com>.
 	# How about differentiating between stratus architectures? -djm
 	echo hppa1.1-stratus-sysv4
-	exit 0 ;;
+	exit ;;
     *:*:*:FTX*)
 	# From seanf@swdc.stratus.com.
 	echo i860-stratus-sysv4
-	exit 0 ;;
+	exit ;;
+    i*86:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo ${UNAME_MACHINE}-stratus-vos
+	exit ;;
     *:VOS:*:*)
 	# From Paul.Green@stratus.com.
 	echo hppa1.1-stratus-vos
-	exit 0 ;;
+	exit ;;
     mc68*:A/UX:*:*)
 	echo m68k-apple-aux${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     news*:NEWS-OS:6*:*)
 	echo mips-sony-newsos6
-	exit 0 ;;
+	exit ;;
     R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
 	if [ -d /usr/nec ]; then
 	        echo mips-nec-sysv${UNAME_RELEASE}
 	else
 	        echo mips-unknown-sysv${UNAME_RELEASE}
 	fi
-        exit 0 ;;
+        exit ;;
     BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
 	echo powerpc-be-beos
-	exit 0 ;;
+	exit ;;
     BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
 	echo powerpc-apple-beos
-	exit 0 ;;
+	exit ;;
     BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
 	echo i586-pc-beos
-	exit 0 ;;
+	exit ;;
     SX-4:SUPER-UX:*:*)
 	echo sx4-nec-superux${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     SX-5:SUPER-UX:*:*)
 	echo sx5-nec-superux${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     SX-6:SUPER-UX:*:*)
 	echo sx6-nec-superux${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     Power*:Rhapsody:*:*)
 	echo powerpc-apple-rhapsody${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:Rhapsody:*:*)
 	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:Darwin:*:*)
-	echo `uname -p`-apple-darwin${UNAME_RELEASE}
-	exit 0 ;;
+	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+	case $UNAME_PROCESSOR in
+	    *86) UNAME_PROCESSOR=i686 ;;
+	    unknown) UNAME_PROCESSOR=powerpc ;;
+	esac
+	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+	exit ;;
     *:procnto*:*:* | *:QNX:[0123456789]*:*)
 	UNAME_PROCESSOR=`uname -p`
 	if test "$UNAME_PROCESSOR" = "x86"; then
@@ -1107,22 +1197,25 @@
 		UNAME_MACHINE=pc
 	fi
 	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:QNX:*:4*)
 	echo i386-pc-qnx
-	exit 0 ;;
-    NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*)
+	exit ;;
+    NSE-?:NONSTOP_KERNEL:*:*)
+	echo nse-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    NSR-?:NONSTOP_KERNEL:*:*)
 	echo nsr-tandem-nsk${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:NonStop-UX:*:*)
 	echo mips-compaq-nonstopux
-	exit 0 ;;
+	exit ;;
     BS2000:POSIX*:*:*)
 	echo bs2000-siemens-sysv
-	exit 0 ;;
+	exit ;;
     DS/*:UNIX_System_V:*:*)
 	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:Plan9:*:*)
 	# "uname -m" is not consistent, so use $cputype instead. 386
 	# is converted to i386 for consistency with other x86
@@ -1133,36 +1226,44 @@
 	    UNAME_MACHINE="$cputype"
 	fi
 	echo ${UNAME_MACHINE}-unknown-plan9
-	exit 0 ;;
-    i*86:OS/2:*:*)
-	# If we were able to find `uname', then EMX Unix compatibility
-	# is probably installed.
-	echo ${UNAME_MACHINE}-pc-os2-emx
-	exit 0 ;;
+	exit ;;
     *:TOPS-10:*:*)
 	echo pdp10-unknown-tops10
-	exit 0 ;;
+	exit ;;
     *:TENEX:*:*)
 	echo pdp10-unknown-tenex
-	exit 0 ;;
+	exit ;;
     KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
 	echo pdp10-dec-tops20
-	exit 0 ;;
+	exit ;;
     XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
 	echo pdp10-xkl-tops20
-	exit 0 ;;
+	exit ;;
     *:TOPS-20:*:*)
 	echo pdp10-unknown-tops20
-	exit 0 ;;
+	exit ;;
     *:ITS:*:*)
 	echo pdp10-unknown-its
-	exit 0 ;;
-    i*86:XTS-300:*:STOP)
-	echo ${UNAME_MACHINE}-unknown-stop
-	exit 0 ;;
-    i*86:atheos:*:*)
-	echo ${UNAME_MACHINE}-unknown-atheos
-	exit 0 ;;
+	exit ;;
+    SEI:*:*:SEIUX)
+        echo mips-sei-seiux${UNAME_RELEASE}
+	exit ;;
+    *:DragonFly:*:*)
+	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit ;;
+    *:*VMS:*:*)
+    	UNAME_MACHINE=`(uname -p) 2>/dev/null`
+	case "${UNAME_MACHINE}" in
+	    A*) echo alpha-dec-vms ; exit ;;
+	    I*) echo ia64-dec-vms ; exit ;;
+	    V*) echo vax-dec-vms ; exit ;;
+	esac ;;
+    *:XENIX:*:SysV)
+	echo i386-pc-xenix
+	exit ;;
+    i*86:skyos:*:*)
+	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+	exit ;;
 esac
 
 #echo '(No uname command or uname output not recognized.)' 1>&2
@@ -1194,7 +1295,7 @@
 #endif
 
 #if defined (__arm) && defined (__acorn) && defined (__unix)
-  printf ("arm-acorn-riscix"); exit (0);
+  printf ("arm-acorn-riscix\n"); exit (0);
 #endif
 
 #if defined (hp300) && !defined (hpux)
@@ -1283,12 +1384,12 @@
 }
 EOF
 
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0
-rm -f $dummy.c $dummy && rmdir $tmpdir
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+	{ echo "$SYSTEM_NAME"; exit; }
 
 # Apollos put the system type in the environment.
 
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
 
 # Convex versions that predate uname can use getsysinfo(1)
 
@@ -1297,22 +1398,22 @@
     case `getsysinfo -f cpu_type` in
     c1*)
 	echo c1-convex-bsd
-	exit 0 ;;
+	exit ;;
     c2*)
 	if getsysinfo -f scalar_acc
 	then echo c32-convex-bsd
 	else echo c2-convex-bsd
 	fi
-	exit 0 ;;
+	exit ;;
     c34*)
 	echo c34-convex-bsd
-	exit 0 ;;
+	exit ;;
     c38*)
 	echo c38-convex-bsd
-	exit 0 ;;
+	exit ;;
     c4*)
 	echo c4-convex-bsd
-	exit 0 ;;
+	exit ;;
     esac
 fi
 
@@ -1323,7 +1424,9 @@
 the operating system you are using. It is advised that you
 download the most up to date version of the config scripts from
 
-    ftp://ftp.gnu.org/pub/gnu/config/
+  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
+and
+  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub
 
 If the version you run ($0) is already up to date, please
 send the following data and any information you think might be
--- klogic-1.62.orig/admin/config.sub
+++ klogic-1.62/admin/config.sub
@@ -1,9 +1,9 @@
 #! /bin/sh
 # Configuration validation subroutine script.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002 Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
 
-timestamp='2002-09-05'
+timestamp='2005-07-08'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -21,14 +21,15 @@
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
 # the same distribution terms that you use for the rest of that program.
 
+
 # Please send patches to <config-patches@gnu.org>.  Submit a context
 # diff and a properly formatted ChangeLog entry.
 #
@@ -70,7 +71,7 @@
 version="\
 GNU config.sub ($timestamp)
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
@@ -83,11 +84,11 @@
 while test $# -gt 0 ; do
   case $1 in
     --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit 0 ;;
+       echo "$timestamp" ; exit ;;
     --version | -v )
-       echo "$version" ; exit 0 ;;
+       echo "$version" ; exit ;;
     --help | --h* | -h )
-       echo "$usage"; exit 0 ;;
+       echo "$usage"; exit ;;
     -- )     # Stop option processing
        shift; break ;;
     - )	# Use stdin as input.
@@ -99,7 +100,7 @@
     *local*)
        # First pass through any local machine types.
        echo $1
-       exit 0;;
+       exit ;;
 
     * )
        break ;;
@@ -118,7 +119,8 @@
 # Here we must recognize all the valid KERNEL-OS combinations.
 maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
-  nto-qnx* | linux-gnu* | freebsd*-gnu* | storm-chaos* | os2-emx* | windows32-* | rtmk-nova*)
+  nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \
+  kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
     os=-$maybe_os
     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
     ;;
@@ -144,7 +146,7 @@
 	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
 	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
 	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple | -axis)
+	-apple | -axis | -knuth | -cray)
 		os=
 		basic_machine=$1
 		;;
@@ -228,14 +230,16 @@
 	| a29k \
 	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
 	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+	| am33_2.0 \
 	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
-	| clipper \
+	| bfin \
+	| c4x | clipper \
 	| d10v | d30v | dlx | dsp16xx \
 	| fr30 | frv \
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
 	| i370 | i860 | i960 | ia64 \
-	| ip2k \
-	| m32r | m68000 | m68k | m88k | mcore \
+	| ip2k | iq2000 \
+	| m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \
 	| mips | mipsbe | mipseb | mipsel | mipsle \
 	| mips16 \
 	| mips64 | mips64el \
@@ -244,28 +248,37 @@
 	| mips64vr4100 | mips64vr4100el \
 	| mips64vr4300 | mips64vr4300el \
 	| mips64vr5000 | mips64vr5000el \
+	| mips64vr5900 | mips64vr5900el \
 	| mipsisa32 | mipsisa32el \
+	| mipsisa32r2 | mipsisa32r2el \
 	| mipsisa64 | mipsisa64el \
+	| mipsisa64r2 | mipsisa64r2el \
 	| mipsisa64sb1 | mipsisa64sb1el \
 	| mipsisa64sr71k | mipsisa64sr71kel \
 	| mipstx39 | mipstx39el \
 	| mn10200 | mn10300 \
+	| ms1 \
+	| msp430 \
 	| ns16k | ns32k \
-	| openrisc | or32 \
+	| or32 \
 	| pdp10 | pdp11 | pj | pjl \
 	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
 	| pyramid \
-	| sh | sh[1234] | sh3e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
+	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
 	| sh64 | sh64le \
-	| sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \
+	| sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \
+	| sparcv8 | sparcv9 | sparcv9b \
 	| strongarm \
-	| tahoe | thumb | tic80 | tron \
+	| tahoe | thumb | tic4x | tic80 | tron \
 	| v850 | v850e \
 	| we32k \
-	| x86 | xscale | xstormy16 | xtensa \
+	| x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
 	| z8k)
 		basic_machine=$basic_machine-unknown
 		;;
+	m32c)
+		basic_machine=$basic_machine-unknown
+		;;
 	m6811 | m68hc11 | m6812 | m68hc12)
 		# Motorola 68HC11/12.
 		basic_machine=$basic_machine-unknown
@@ -293,19 +306,19 @@
 	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
 	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
 	| avr-* \
-	| bs2000-* \
-	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* \
-	| clipper-* | cydra-* \
+	| bfin-* | bs2000-* \
+	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
+	| clipper-* | craynv-* | cydra-* \
 	| d10v-* | d30v-* | dlx-* \
 	| elxsi-* \
 	| f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
 	| h8300-* | h8500-* \
 	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
 	| i*86-* | i860-* | i960-* | ia64-* \
-	| ip2k-* \
-	| m32r-* \
+	| ip2k-* | iq2000-* \
+	| m32r-* | m32rle-* \
 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | mcore-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* \
 	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
 	| mips16-* \
 	| mips64-* | mips64el-* \
@@ -314,29 +327,40 @@
 	| mips64vr4100-* | mips64vr4100el-* \
 	| mips64vr4300-* | mips64vr4300el-* \
 	| mips64vr5000-* | mips64vr5000el-* \
+	| mips64vr5900-* | mips64vr5900el-* \
 	| mipsisa32-* | mipsisa32el-* \
+	| mipsisa32r2-* | mipsisa32r2el-* \
 	| mipsisa64-* | mipsisa64el-* \
+	| mipsisa64r2-* | mipsisa64r2el-* \
 	| mipsisa64sb1-* | mipsisa64sb1el-* \
 	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
-	| mipstx39 | mipstx39el \
+	| mipstx39-* | mipstx39el-* \
+	| mmix-* \
+	| ms1-* \
+	| msp430-* \
 	| none-* | np1-* | ns16k-* | ns32k-* \
 	| orion-* \
 	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
 	| pyramid-* \
 	| romp-* | rs6000-* \
-	| sh-* | sh[1234]-* | sh3e-* | sh[34]eb-* | shbe-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \
 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
-	| sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
-	| sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
-	| tahoe-* | thumb-* | tic30-* | tic4x-* | tic54x-* | tic80-* | tron-* \
+	| sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \
+	| sparclite-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
+	| tahoe-* | thumb-* \
+	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+	| tron-* \
 	| v850-* | v850e-* | vax-* \
 	| we32k-* \
-	| x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
-	| xtensa-* \
+	| x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
+	| xstormy16-* | xtensa-* \
 	| ymp-* \
 	| z8k-*)
 		;;
+	m32c-*)
+		;;
 	# Recognize the various machine names and aliases which stand
 	# for a CPU type and a company and sometimes even an OS.
 	386bsd)
@@ -353,6 +377,9 @@
 		basic_machine=a29k-amd
 		os=-udi
 		;;
+    	abacus)
+		basic_machine=abacus-unknown
+		;;
 	adobe68k)
 		basic_machine=m68010-adobe
 		os=-scout
@@ -367,6 +394,12 @@
 		basic_machine=a29k-none
 		os=-bsd
 		;;
+	amd64)
+		basic_machine=x86_64-pc
+		;;
+	amd64-*)
+		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
 	amdahl)
 		basic_machine=580-amdahl
 		os=-sysv
@@ -426,12 +459,27 @@
 		basic_machine=j90-cray
 		os=-unicos
 		;;
+	craynv)
+		basic_machine=craynv-cray
+		os=-unicosmp
+		;;
+	cr16c)
+		basic_machine=cr16c-unknown
+		os=-elf
+		;;
 	crds | unos)
 		basic_machine=m68k-crds
 		;;
+	crisv32 | crisv32-* | etraxfs*)
+		basic_machine=crisv32-axis
+		;;
 	cris | cris-* | etrax*)
 		basic_machine=cris-axis
 		;;
+	crx)
+		basic_machine=crx-unknown
+		os=-elf
+		;;
 	da30 | da30-*)
 		basic_machine=m68k-da30
 		;;
@@ -454,6 +502,10 @@
 		basic_machine=m88k-motorola
 		os=-sysv3
 		;;
+	djgpp)
+		basic_machine=i586-pc
+		os=-msdosdjgpp
+		;;
 	dpx20 | dpx20-*)
 		basic_machine=rs6000-bull
 		os=-bosx
@@ -632,10 +684,6 @@
 	mips3*)
 		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
 		;;
-	mmix*)
-		basic_machine=mmix-knuth
-		os=-mmixware
-		;;
 	monitor)
 		basic_machine=m68k-rom68k
 		os=-coff
@@ -723,9 +771,12 @@
 		basic_machine=hppa1.1-oki
 		os=-proelf
 		;;
-	or32 | or32-*)
+	openrisc | openrisc-*)
 		basic_machine=or32-unknown
-		os=-coff
+		;;
+	os400)
+		basic_machine=powerpc-ibm
+		os=-os400
 		;;
 	OSE68000 | ose68000)
 		basic_machine=m68000-ericsson
@@ -758,18 +809,24 @@
 	pentiumpro | p6 | 6x86 | athlon | athlon_*)
 		basic_machine=i686-pc
 		;;
-	pentiumii | pentium2)
+	pentiumii | pentium2 | pentiumiii | pentium3)
 		basic_machine=i686-pc
 		;;
+	pentium4)
+		basic_machine=i786-pc
+		;;
 	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
 		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
 	pentiumpro-* | p6-* | 6x86-* | athlon-*)
 		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
-	pentiumii-* | pentium2-*)
+	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
 		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
+	pentium4-*)
+		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
 	pn)
 		basic_machine=pn-gould
 		;;
@@ -828,6 +885,10 @@
 	sb1el)
 		basic_machine=mipsisa64sb1el-unknown
 		;;
+	sei)
+		basic_machine=mips-sei
+		os=-seiux
+		;;
 	sequent)
 		basic_machine=i386-sequent
 		;;
@@ -835,6 +896,9 @@
 		basic_machine=sh-hitachi
 		os=-hms
 		;;
+	sh64)
+		basic_machine=sh64-unknown
+		;;
 	sparclite-wrs | simso-wrs)
 		basic_machine=sparclite-wrs
 		os=-vxworks
@@ -901,10 +965,6 @@
 		basic_machine=i386-sequent
 		os=-dynix
 		;;
-	t3d)
-		basic_machine=alpha-cray
-		os=-unicos
-		;;
 	t3e)
 		basic_machine=alphaev5-cray
 		os=-unicos
@@ -913,14 +973,18 @@
 		basic_machine=t90-cray
 		os=-unicos
 		;;
-        tic4x | c4x*)
-		basic_machine=tic4x-unknown
-		os=-coff
-		;;
 	tic54x | c54x*)
 		basic_machine=tic54x-unknown
 		os=-coff
 		;;
+	tic55x | c55x*)
+		basic_machine=tic55x-unknown
+		os=-coff
+		;;
+	tic6x | c6x*)
+		basic_machine=tic6x-unknown
+		os=-coff
+		;;
 	tx39)
 		basic_machine=mipstx39-unknown
 		;;
@@ -934,6 +998,10 @@
 	tower | tower-32)
 		basic_machine=m68k-ncr
 		;;
+	tpf)
+		basic_machine=s390x-ibm
+		os=-tpf
+		;;
 	udi29k)
 		basic_machine=a29k-amd
 		os=-udi
@@ -977,9 +1045,9 @@
 		basic_machine=hppa1.1-winbond
 		os=-proelf
 		;;
-	windows32)
-		basic_machine=i386-pc
-		os=-windows32-msvcrt
+	xbox)
+		basic_machine=i686-pc
+		os=-mingw32
 		;;
 	xps | xps100)
 		basic_machine=xps100-honeywell
@@ -1011,6 +1079,9 @@
 	romp)
 		basic_machine=romp-ibm
 		;;
+	mmix)
+		basic_machine=mmix-knuth
+		;;
 	rs6000)
 		basic_machine=rs6000-ibm
 		;;
@@ -1027,13 +1098,10 @@
 	we32k)
 		basic_machine=we32k-att
 		;;
-	sh3 | sh4 | sh3eb | sh4eb | sh[1234]le | sh3ele)
+	sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
 		basic_machine=sh-unknown
 		;;
-	sh64)
-		basic_machine=sh64-unknown
-		;;
-	sparc | sparcv9 | sparcv9b)
+	sparc | sparcv8 | sparcv9 | sparcv9b)
 		basic_machine=sparc-sun
 		;;
 	cydra)
@@ -1106,18 +1174,21 @@
 	      | -aos* \
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-	      | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
-	      | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \
+	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
 	      | -chorusos* | -chorusrdb* \
 	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
-	      | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \
+	      | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
 	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
 	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
-	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* | -powermax*)
+	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+	      | -skyos* | -haiku*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)
@@ -1129,16 +1200,21 @@
 			;;
 		esac
 		;;
+	-nto-qnx*)
+		;;
 	-nto*)
-		os=-nto-qnx
+		os=`echo $os | sed -e 's|nto|nto-qnx|'`
 		;;
 	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
-	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
+	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
 	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
 		;;
 	-mac*)
 		os=`echo $os | sed -e 's|mac|macos|'`
 		;;
+	-linux-dietlibc)
+		os=-linux-dietlibc
+		;;
 	-linux*)
 		os=`echo $os | sed -e 's|linux|linux-gnu|'`
 		;;
@@ -1151,6 +1227,9 @@
 	-opened*)
 		os=-openedition
 		;;
+        -os400*)
+		os=-os400
+		;;
 	-wince*)
 		os=-wince
 		;;
@@ -1172,6 +1251,9 @@
 	-atheos*)
 		os=-atheos
 		;;
+	-syllable*)
+		os=-syllable
+		;;
 	-386bsd)
 		os=-bsd
 		;;
@@ -1194,6 +1276,9 @@
 	-sinix*)
 		os=-sysv4
 		;;
+        -tpf*)
+		os=-tpf
+		;;
 	-triton*)
 		os=-sysv3
 		;;
@@ -1224,6 +1309,15 @@
 	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
 		os=-mint
 		;;
+	-aros*)
+		os=-aros
+		;;
+	-kaos*)
+		os=-kaos
+		;;
+	-zvmoe)
+		os=-zvmoe
+		;;
 	-none)
 		;;
 	*)
@@ -1255,6 +1349,9 @@
 	arm*-semi)
 		os=-aout
 		;;
+    c4x-* | tic4x-*)
+        os=-coff
+        ;;
 	# This must come before the *-dec entry.
 	pdp10-*)
 		os=-tops20
@@ -1298,9 +1395,15 @@
 	*-be)
 		os=-beos
 		;;
+	*-haiku)
+		os=-haiku
+		;;
 	*-ibm)
 		os=-aix
 		;;
+    	*-knuth)
+		os=-mmixware
+		;;
 	*-wec)
 		os=-proelf
 		;;
@@ -1433,9 +1536,15 @@
 			-mvs* | -opened*)
 				vendor=ibm
 				;;
+			-os400*)
+				vendor=ibm
+				;;
 			-ptx*)
 				vendor=sequent
 				;;
+			-tpf*)
+				vendor=ibm
+				;;
 			-vxsim* | -vxworks* | -windiss*)
 				vendor=wrs
 				;;
@@ -1460,7 +1569,7 @@
 esac
 
 echo $basic_machine$os
-exit 0
+exit
 
 # Local variables:
 # eval: (add-hook 'write-file-hooks 'time-stamp)
--- klogic-1.62.orig/configure
+++ klogic-1.62/configure
@@ -1949,8 +1949,8 @@
 
 
 # Define the identity of the package.
- PACKAGE=tmp
- VERSION=0.1
+ PACKAGE=klogic
+ VERSION=1.62
 
 
 cat >>confdefs.h <<_ACEOF
--- klogic-1.62.orig/debian/dirs
+++ klogic-1.62/debian/dirs
@@ -0,0 +1,3 @@
+usr/bin
+usr/share/applications
+usr/share/pixmaps
--- klogic-1.62.orig/debian/docs
+++ klogic-1.62/debian/docs
@@ -0,0 +1 @@
+AUTHORS
--- klogic-1.62.orig/debian/menu
+++ klogic-1.62/debian/menu
@@ -0,0 +1,8 @@
+?package(klogic):\
+	needs=x11\
+	section=Apps/Science\
+	hints="KDE"\
+	title="KLogic"\
+	icon="/usr/share/icons/klogic/klogic.xpm"\
+	kderemove="1"\
+	command="/usr/bin/klogic"
--- klogic-1.62.orig/debian/control
+++ klogic-1.62/debian/control
@@ -0,0 +1,23 @@
+Source: klogic
+Section: electronics
+Priority: optional
+Maintainer: Chris Boyle <cmb@debian.org>
+Build-Depends: debhelper (>> 3.0.0), kdelibs4-dev (>= 4:3.1.2-2), kdelibs-bin (>= 4:3.1.2-2), docbook-to-man, autotools-dev
+Standards-Version: 3.6.2.0
+
+Package: klogic
+Architecture: any
+Depends: ${shlibs:Depends}
+Description: digital circuit editor and simulator for KDE
+ KLogic is an application for building and simulating digital circuits 
+ easily. 
+ .
+ It provides an easy way to build circuits containing standard 
+ components like AND, OR, XOR and flipflops like RS and JK. To build 
+ more complex and reuseable circuits, you can create sub-circuits. 
+ .
+ The simulation runs permanently by default while building your 
+ circuits. For extended testing you can use a single stepping simulation 
+ to recognise peaks. You can display the signal flow of the components 
+ of a circuit as a graph. Each device of your circuit has a tuneable 
+ delay. With the burst option the delay of all devices can be disabled. 
--- klogic-1.62.orig/debian/rules
+++ klogic-1.62/debian/rules
@@ -0,0 +1,106 @@
+#!/usr/bin/make -f
+# Based on sample debian/rules that uses debhelper.
+# GNU copyright 1997 to 1999 by Joey Hess.
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+# This is the debhelper compatability version to use.
+export DH_COMPAT=3
+
+ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
+  COMPILER_FLAGS += CFLAGS="-O0 -g -Wall"
+else
+  COMPILER_FLAGS += CFLAGS="-O2 -g -Wall"
+endif
+
+configure: configure-stamp
+configure-stamp:
+	dh_testdir
+	# configure the package
+	$(COMPILER_FLAGS) \
+	./configure --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info --disable-rpath
+
+	touch configure-stamp
+
+build: configure-stamp build-stamp
+build-stamp:
+	dh_testdir
+
+	# compile the package
+	$(MAKE)
+	/usr/bin/docbook-to-man debian/klogic.sgml > klogic.1
+
+	touch build-stamp
+
+clean:
+	dh_testdir
+	dh_testroot
+	rm -f build-stamp configure-stamp
+
+	# clean up after the build process.
+	-$(MAKE) distclean
+
+	dh_clean
+	-test -r /usr/share/misc/config.sub && \
+	cp -f /usr/share/misc/config.sub admin/config.sub
+	-test -r /usr/share/misc/config.guess && \
+	cp -f /usr/share/misc/config.guess admin/config.guess
+
+
+install: build
+	dh_testdir
+	dh_testroot
+	dh_clean -k
+	dh_installdirs
+
+	# install the package into debian/klogic.
+	$(MAKE) install prefix=$(CURDIR)/debian/klogic/usr
+	mkdir -p debian/klogic/usr/share/applnk/Edutainment/Science
+	cp klogic/klogic.desktop debian/klogic/usr/share/applications
+	mkdir -p debian/klogic/usr/share/icons/locolor/32x32
+	cp pics/klogic.xpm debian/klogic/usr/share/pixmaps
+	dh_desktop
+
+# Build architecture-independent files
+binary-indep: build install
+# nothing to do
+
+# Build architecture-dependent files
+binary-arch: build install
+	dh_testdir
+	dh_testroot
+#	dh_installdebconf	
+	dh_installdocs
+	dh_installexamples
+	dh_installmenu
+#	dh_installlogrotate
+#	dh_installemacsen
+#	dh_installpam
+#	dh_installmime
+#	dh_installinit
+#	dh_installcron
+	dh_installman klogic.1
+#	dh_installinfo
+#	dh_undocumented
+	dh_installchangelogs ChangeLog
+	mkdir $(CURDIR)/debian/klogic/usr/share/doc/kde
+	mv $(CURDIR)/debian/klogic/usr/share/doc/HTML $(CURDIR)/debian/klogic/usr/share/doc/kde
+	rm $(CURDIR)/debian/klogic/usr/share/doc/kde/HTML/en/klogic/common
+	rm $(CURDIR)/debian/klogic/usr/share/doc/klogic/changelog
+	dh_link
+ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS)))
+	dh_strip
+endif
+	dh_compress -X.docbook
+	dh_fixperms
+#	dh_makeshlibs
+	dh_installdeb
+#	dh_perl
+	dh_shlibdeps
+	dh_gencontrol
+	dh_md5sums
+	dh_builddeb
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install configure
--- klogic-1.62.orig/debian/watch
+++ klogic-1.62/debian/watch
@@ -0,0 +1,2 @@
+version=2
+http://www.a-rostin.de/klogic/ (?:.*/)?klogic-([\d\.r-]+)\.tar\.gz debian uupdate
--- klogic-1.62.orig/debian/changelog
+++ klogic-1.62/debian/changelog
@@ -0,0 +1,116 @@
+klogic (1.62-6ubuntu1) dapper; urgency=low
+
+  * Moved .desktop file and icon to default locations (closes Malone 45752)
+  * Modified .desktop file to match specifications (closes Malone 45753)
+
+ -- Emmet Hikory <emmet.hikory@gmail.com>  Sun, 21 May 2006 09:05:54 +0900
+
+klogic (1.62-6) unstable; urgency=low
+
+  * Bumped Standards-Version to 3.6.2.0.
+  * Rebuild for new KDE libs (c2a).
+
+ -- Chris Boyle <cmb@debian.org>  Thu,  1 Dec 2005 20:02:24 +0000
+
+klogic (1.62-5) unstable; urgency=low
+
+  * Rebuild for Qt/KDE transition. (closes: #327976)
+
+ -- Chris Boyle <cmb@debian.org>  Tue, 13 Sep 2005 02:12:42 +0100
+
+klogic (1.62-4) unstable; urgency=low
+
+  * Argh. Actually add the build-dep on autotools-dev for that.
+
+ -- Chris Boyle <cmb@debian.org>  Sun, 19 Jun 2005 23:50:04 +0100
+
+klogic (1.62-3) unstable; urgency=low
+
+  * Copy config.{guess,sub} to the right place this time. (closes: #303938)
+
+ -- Chris Boyle <cmb@debian.org>  Sun, 19 Jun 2005 23:27:55 +0100
+
+klogic (1.62-2) unstable; urgency=low
+
+  * Exclude docbook file from compression because KDE help browser can't
+    handle it. (closes: #312414)
+  * German language corrections from Jens Seidel. (closes: #314024)
+  * Auto-update config.{guess,sub} from autotools-dev. (closes: #303938)
+  * Fix package name and version in configure to make i18n actually work.
+
+ -- Chris Boyle <cmb@debian.org>  Sun, 19 Jun 2005 12:48:26 +0100
+
+klogic (1.62-1) unstable; urgency=medium
+
+  * New upstream release. (closes: #300524)
+  * Thanks for the NMU. Upstream have now made a similar change.
+    (closes: #246447)
+  * Add a watch file.
+
+ -- Chris Boyle <cmb@debian.org>  Sat,  2 Apr 2005 23:03:27 +0100
+
+klogic (1.5-5.1) unstable; urgency=low
+
+  * Non-maintainer upload.
+  * Avoid build problem on 64-bit archs. (Closes: #246447)
+
+ -- Petter Reinholdtsen <pere@debian.org>  Sat,  5 Jun 2004 20:13:46 +0200
+
+klogic (1.5-5) unstable; urgency=low
+
+  * Added build-dep on kdelibs-bin for meinproc.
+  * Use supplied klogic.desktop file for KDE to ensure docs are found.
+    (closes: #213027)
+  * Changed klogic.desktop to use klogic.xpm not klogic.png (which
+    does not exist).
+  * Bumped standards-version to 3.6.1.0
+
+ -- Chris Boyle <cmb@debian.org>  Sun, 21 Mar 2004 17:03:53 +0000
+
+klogic (1.5-4) unstable; urgency=low
+
+  * Fix FTBFS with paranoid options, thanks Ronald Stigge <stigge@antcom.de>
+    (closes: #221059)
+
+ -- Chris Boyle <cmb@debian.org>  Sun, 14 Dec 2003 17:48:42 +0000
+
+klogic (1.5-3) unstable; urgency=low
+
+  * Set kderemove="", to *really* make a menu item. Shame on me for not
+    checking properly. (closes: #199482) (still open due to next item)
+  * Frobbed pbuilder so it doesn't mangle my Maintainer field and make
+    everything think this is an NMU!
+  * Removed examples/Makefile, which was being added by the debian diff. 
+    How did *that* get there...
+
+ -- Chris Boyle <cmb@debian.org>  Wed,  9 Jul 2003 08:05:27 +0100
+
+klogic (1.5-2) unstable; urgency=low
+
+  * Set kderemove=0 in debian/menu, since on closer inspection, upstream
+    has chosen not to install the .desktop file in the source (perhaps 
+    since there isn't klogic.png or something). (closes: #199482)
+
+ -- Chris Boyle <cmb@debian.org>  Mon,  7 Jul 2003 23:21:49 +0100
+
+klogic (1.5-1) unstable; urgency=low
+
+  * New maintainer. (closes: #178907)
+    - The "yay at last all my (1st year) exams are over!" release.
+  * New upstream version.
+  * New policy version. (3.5.10, was 3.5.2)
+  * Added support for DEB_BUILD_OPTIONS.
+  * Changed section from utils to electronics.
+  * Changed menu section from Apps/Tools to Apps/Science.
+  * Building with pbuilder. This is good, I shouldn't get any missing
+    build-deps at all. :-)
+  * Added Build-Depends: kdelibs4-dev (>= 4:3.1.2-2), docbook-to-man
+
+ -- Chris Boyle <cmb@debian.org>  Sun, 15 Jun 2003 20:23:35 +0100
+
+klogic (1.3-1) unstable; urgency=low
+
+  * Initial Release.
+
+ -- Matthias Kaehlcke <matthias.kaehlcke@gmx.net>  Thu, 18 Oct 2001 18:26:37 +0200
+
--- klogic-1.62.orig/debian/klogic.links
+++ klogic-1.62/debian/klogic.links
@@ -0,0 +1 @@
+/usr/share/doc/kde/HTML/en/common /usr/share/doc/kde/HTML/en/klogic/common
--- klogic-1.62.orig/debian/copyright
+++ klogic-1.62/debian/copyright
@@ -0,0 +1,15 @@
+This package was debianized by Matthias Kaehlcke <matthias.kaehlcke@gmx.net> on
+Thu, 18 Oct 2001 18:26:37 +0200.
+It is now maintained by Chris Boyle <cmb@debian.org>.
+
+It was downloaded from http://www.a-rostin.de/klogic/
+
+Upstream Author: Andreas Rostin andreas@a-rostin.de
+
+Copyright: This software is copyright (c) 2001 by Andreas Rostin
+
+You are free to distribute this software under the terms of
+the GNU General Public License.
+On Debian systems, the complete text of the GNU General Public
+License can be found in /usr/share/common-licenses/GPL file.
+
--- klogic-1.62.orig/debian/klogic.sgml
+++ klogic-1.62/debian/klogic.sgml
@@ -0,0 +1,185 @@
+<!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN" [
+
+<!-- Process this file with docbook-to-man to generate an nroff manual
+     page: `docbook-to-man manpage.sgml > manpage.1'.  You may view
+     the manual page with: `docbook-to-man manpage.sgml | nroff -man |
+     less'.  A typical entry in a Makefile or Makefile.am is:
+
+manpage.1: manpage.sgml
+	docbook-to-man $< > $@
+  -->
+
+  <!-- Fill in your name for FIRSTNAME and SURNAME. -->
+  <!ENTITY dhfirstname "<firstname>Matthias</firstname>">
+  <!ENTITY dhsurname   "<surname>Kaehlcke</surname>">
+  <!-- Please adjust the date whenever revising the manpage. -->
+  <!ENTITY dhdate      "<date>October  18, 2001</date>">
+  <!-- SECTION should be 1-8, maybe w/ subsection other parameters are
+       allowed: see man(7), man(1). -->
+  <!ENTITY dhsection   "<manvolnum>1</manvolnum>">
+  <!ENTITY dhemail     "<email>matthias.kaehlcke@gmx.net</email>">
+  <!ENTITY dhusername  "matze">
+  <!ENTITY dhucpackage "<refentrytitle>KLOGIC</refentrytitle>">
+  <!ENTITY dhpackage   "klogic">
+
+  <!ENTITY debian      "<productname>Debian GNU/Linux</productname>">
+  <!ENTITY gnu         "<acronym>GNU</acronym>">
+]>
+
+<refentry>
+  <refentryinfo>
+    <address>
+      &dhemail;
+    </address>
+    <author>
+      &dhfirstname;
+      &dhsurname;
+    </author>
+    <copyright>
+      <year>2001</year>
+      <holder>&dhusername;</holder>
+    </copyright>
+    &dhdate;
+  </refentryinfo>
+  <refmeta>
+    &dhucpackage;
+
+    &dhsection;
+  </refmeta>
+  <refnamediv>
+    <refname>&dhpackage;</refname>
+
+    <refpurpose>building and simulating digital circuits</refpurpose>
+  </refnamediv>
+  <refsynopsisdiv>
+    <cmdsynopsis>
+      <command>&dhpackage;</command>
+
+      <arg><option>Qt-options</option></arg>
+      <arg><option>KDE-options</option></arg>
+      <arg><option><replaceable>FILE</replaceable></option></arg>
+    </cmdsynopsis>
+  </refsynopsisdiv>
+  <refsect1>
+    <title>DESCRIPTION</title>
+
+    <para><command>&dhpackage;</command> is an application for building and simulating digital circuits easily. It provides an easy way for building circuits containing standard components like AND, OR, XOR and flipflops like RS and JK. To build more complex and reuseable circuits, you can create sub circuits.</para>
+
+    <para>This manual page was written for the &debian; distribution
+      because the original program does not have a manual page.</para>
+
+  </refsect1>
+  <refsect1>
+    <title>OPTIONS</title>
+
+    <para>These programs follow the usual GNU command line syntax,
+      with long options starting with two dashes (`-').  A summary of
+      options is included below.</para>
+
+    <variablelist>
+      <varlistentry>
+        <term><option>--help</option>
+        </term>
+        <listitem>
+          <para>Show help about options</para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><option>--help-qt</option>
+        </term>
+        <listitem>
+          <para>Show Qt specific options</para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><option>--help-kde</option>
+        </term>
+        <listitem>
+          <para>Show KDE specific options</para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><option>--help-all</option>
+        </term>
+        <listitem>
+          <para>Show all options</para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><option>--author</option>
+        </term>
+        <listitem>
+          <para>Show author information</para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><option>--version</option>
+          <option>-v</option>
+        </term>
+        <listitem>
+          <para>Show version of program</para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><option>--license</option>
+        </term>
+        <listitem>
+          <para>Show license information</para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>AUTHOR</title>
+
+    <para>This manual page was written by &dhusername; &dhemail; for 
+      the &debian; system (but may be used by others). Permission is 
+      granted to copy, distribute and/or modify this document under the 
+      terms of the <acronym>GNU</acronym> Free Documentation License, 
+      Version 1.1 or any later version published by the Free Software 
+      Foundation; with no Invariant Sections, no Front-Cover Texts and 
+      no Back-Cover Texts.</para>
+
+  </refsect1>
+</refentry>
+
+<!-- Keep this comment at the end of the file
+Local variables:
+mode: sgml
+sgml-omittag:t
+sgml-shorttag:t
+sgml-minimize-attributes:nil
+sgml-always-quote-attributes:t
+sgml-indent-step:2
+sgml-indent-data:t
+sgml-parent-document:nil
+sgml-default-dtd-file:nil
+sgml-exposed-tags:nil
+sgml-local-catalogs:nil
+sgml-local-ecat-files:nil
+End:
+-->
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
--- klogic-1.62.orig/klogic/dlgPattern.cpp
+++ klogic-1.62/klogic/dlgPattern.cpp
@@ -319,7 +319,11 @@
 {
 	int x, y;
 	int maxhier = 100;
-	int minx[100], miny[100], maxx[100], maxy[100], aInit[100];
+	int* minx = new int[100];
+	int* miny = new int[100];
+	int* maxx = new int[100];
+	int* maxy = new int[100];
+	int* aInit = new int[100];
 
 	QColor oCols[] = {Qt::darkMagenta, Qt::red, Qt::green, Qt::blue,
 			   Qt::cyan, Qt::magenta, Qt::gray, Qt::darkYellow,
@@ -426,4 +430,10 @@
 		i++;
 	}
 	p.end();
+
+	delete[] minx;
+	delete[] miny;
+	delete[] maxx;
+	delete[] maxy;
+	delete[] aInit;
 }
--- klogic-1.62.orig/klogic/klogic.desktop
+++ klogic-1.62/klogic/klogic.desktop
@@ -3,10 +3,11 @@
 Encoding=UTF-8
 Type=Application
 Exec=klogic -caption "%c" %i %m  
-Icon=klogic.png
-DocPath=klogic/index.html
-Comment=
-Comment[de]=
-Terminal=0
+Icon=klogic
+X-DocPath=klogic/index.html
+Comment=Simulate Digital Circuits
+Comment[de]==Digitalschaltungen simulieren 
+Terminal=false
 Name=KLogic
 Name[de]=KLogic
+Categories=KDE;Science;Electronics;