--- kxl-1.1.7.orig/debian/copyright +++ kxl-1.1.7/debian/copyright @@ -0,0 +1,23 @@ +This package was debianized by Samuel Hocevar on +Sat, 12 Apr 2003 05:03:43 +0200. + +It was downloaded from http://kxl.hn.org/kxl1xx.php + +Upstream Author: Katsuyoshi Sato + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation; either version 2.1 of + the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +On Debian GNU/Linux systems, the complete text of the GNU Lesser General +Public License can be found in `/usr/share/common-licenses/LGPL'. --- kxl-1.1.7.orig/debian/patches/020_alsa.diff +++ kxl-1.1.7/debian/patches/020_alsa.diff @@ -0,0 +1,34 @@ +--- kxl-1.1.7.orig/src/KXLsound.c ++++ kxl-1.1.7/src/KXLsound.c +@@ -22,7 +25,7 @@ + struct { + Uint16 ListCnt; + Sint32 ID; +- Sint32 Pipe[2]; ++ int Pipe[2]; + Sint32 Device; + Uint16 PlayCnt; + KXL_SoundControl PlaySound[MAX_SOUNDS_PLAYING]; +@@ -242,11 +245,19 @@ + KXL_SoundOk = False; + + KXL_LoadSoundData(path, fname); +- // device check +- if ((KXL_SoundData.Device = open("/dev/dsp", O_WRONLY)) == -1) { +- fprintf(stderr, "KXL error message\nnot found sound card\n"); ++ // Open the sound device in non-blocking mode, because ALSA's OSS ++ // emulation and some broken OSS drivers would make a blocking call ++ // wait forever until the device is available. Since this breaks the ++ // OSS spec, we immediately put it back to blocking mode if the ++ // operation was successful. ++ KXL_SoundData.Device = open("/dev/dsp", O_WRONLY|O_NDELAY); ++ if (KXL_SoundData.Device < 0) { ++ fprintf(stderr, "KXL error message\ncould not open sound card (%s)\n", ++ strerror(errno)); + return; + } ++ fcntl( KXL_SoundData.Device, F_SETFL, ++ fcntl( KXL_SoundData.Device, F_GETFL ) &~ FNDELAY ); + // create pipe + if (pipe(KXL_SoundData.Pipe) < 0) { + fprintf(stderr, "KXL error message\npipe error\n"); --- kxl-1.1.7.orig/debian/patches/000_soname_xlibs.diff +++ kxl-1.1.7/debian/patches/000_soname_xlibs.diff @@ -0,0 +1,10 @@ +--- kxl-1.1.7.orig/src/Makefile.am ++++ kxl-1.1.7/src/Makefile.am +@@ -1,4 +1,6 @@ + lib_LTLIBRARIES = libKXL.la + libKXL_la_SOURCES = KXLmisc.c KXLsound.c KXLjoystick.c KXLvisual.c KXLimage.c + include_HEADERS = KXL.h +-libKXL_la_LDFLAGS = -release $(VERSION) ++libKXL_la_LDFLAGS = -version-info 0:0:0 ++#libKXL_la_LDFLAGS = -release $(VERSION) ++libKXL_la_LIBADD = -L/usr/X11R6/lib -lX11 --- kxl-1.1.7.orig/debian/patches/020_autorepeat.diff +++ kxl-1.1.7/debian/patches/020_autorepeat.diff @@ -0,0 +1,36 @@ +--- kxl-1.1.7.orig/src/KXLvisual.c ++++ kxl-1.1.7/src/KXLvisual.c +@@ -364,7 +366,11 @@ + KXL_ReSizeFrame(w, h); + KXL_Clear_Frame(0, 0, w, h); + // Auto repeat off +- XAutoRepeatOff(KXL_Root->Display); ++ XkbSetDetectableAutoRepeat(KXL_Root->Display, True, ++ &KXL_Root->DetectAutoRepeat); ++ if(!KXL_Root->DetectAutoRepeat) { ++ XAutoRepeatOff(KXL_Root->Display); ++ } + } + + //============================================================== +@@ -377,7 +383,9 @@ + XFreeGC(KXL_Root->Display, KXL_Root->Frame->Gc); + KXL_Free(KXL_Root->Frame); + // Auto repeat on +- XAutoRepeatOn(KXL_Root->Display); ++ if(!KXL_Root->DetectAutoRepeat) { ++ XAutoRepeatOn(KXL_Root->Display); ++ } + // Delete font + XFreeGC(KXL_Root->Display, KXL_Root->FontGC); + // Delete window +--- kxl-1.1.7.orig/src/KXL.h ++++ kxl-1.1.7/src/KXL.h +@@ -205,6 +207,7 @@ + KXL_Frame *Frame; // Pointer of frame structure + GC FontGC; // GC of font + XFontStruct *WinFont; // Pointer of font structrue ++ Bool DetectAutoRepeat; // Does the server have detectable auto repeat + } KXL_Window; + // RGBE palette + typedef struct { --- kxl-1.1.7.orig/debian/patches/020_headers.diff +++ kxl-1.1.7/debian/patches/020_headers.diff @@ -0,0 +1,42 @@ +--- kxl-1.1.7.orig/src/KXLsound.c ++++ kxl-1.1.7/src/KXLsound.c +@@ -1,6 +1,9 @@ + #include ++#include + #include + #include ++#include ++#include + #include + #include + #include +--- kxl-1.1.7.orig/src/KXLvisual.c ++++ kxl-1.1.7/src/KXLvisual.c +@@ -1,4 +1,6 @@ + #include ++#include ++#include + #include "KXL.h" + + //================================================================ +--- kxl-1.1.7.orig/src/KXLimage.c ++++ kxl-1.1.7/src/KXLimage.c +@@ -1,4 +1,5 @@ + #include ++#include + #include "KXL.h" + + extern KXL_Window *KXL_Root; +--- kxl-1.1.7.orig/src/KXL.h ++++ kxl-1.1.7/src/KXL.h +@@ -2,8 +2,10 @@ + #define _KXLIB_H_ + + #include ++#include + #include + #include ++#include + #include + + --- kxl-1.1.7.orig/debian/patches/030_underquoted_definition.diff +++ kxl-1.1.7/debian/patches/030_underquoted_definition.diff @@ -0,0 +1,13 @@ +Index: kxl-1.1.7/KXL.m4 +=================================================================== +--- kxl-1.1.7.orig/KXL.m4 2006-11-10 12:07:40.000000000 +0100 ++++ kxl-1.1.7/KXL.m4 2006-11-10 12:07:47.000000000 +0100 +@@ -3,7 +3,7 @@ + dnl Test for libKXL, and define KXL_CFLAGS and KXL_LIBS as appropriate. + dnl enables arguments --with-kxl-prefix= -with-kxl-inc-prefix= + dnl +-AC_DEFUN(AM_PATH_KXL, ++AC_DEFUN([AM_PATH_KXL], + [dnl + dnl Get the cfags and libraries for KXL + dnl --- kxl-1.1.7.orig/debian/patches/010_rebootstrap.diff +++ kxl-1.1.7/debian/patches/010_rebootstrap.diff @@ -0,0 +1,47769 @@ +Index: kxl-1.1.7/Makefile.in +=================================================================== +--- kxl-1.1.7.orig/Makefile.in 2003-02-14 08:25:44.000000000 +0100 ++++ kxl-1.1.7/Makefile.in 2006-05-09 18:51:28.000000000 +0200 +@@ -1,6 +1,8 @@ +-# Makefile.in generated automatically by automake 1.4-p4 from Makefile.am ++# Makefile.in generated by automake 1.9.6 from Makefile.am. ++# @configure_input@ + +-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. ++# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -10,124 +12,242 @@ + # even the implied warranty of MERCHANTABILITY or FITNESS FOR A + # PARTICULAR PURPOSE. + +- +-SHELL = @SHELL@ ++@SET_MAKE@ + + srcdir = @srcdir@ + top_srcdir = @top_srcdir@ + VPATH = @srcdir@ +-prefix = @prefix@ +-exec_prefix = @exec_prefix@ +- +-bindir = @bindir@ +-sbindir = @sbindir@ +-libexecdir = @libexecdir@ +-datadir = @datadir@ +-sysconfdir = @sysconfdir@ +-sharedstatedir = @sharedstatedir@ +-localstatedir = @localstatedir@ +-libdir = @libdir@ +-infodir = @infodir@ +-mandir = @mandir@ +-includedir = @includedir@ +-oldincludedir = /usr/include +- +-DESTDIR = +- + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ +- + top_builddir = . +- +-ACLOCAL = @ACLOCAL@ +-AUTOCONF = @AUTOCONF@ +-AUTOMAKE = @AUTOMAKE@ +-AUTOHEADER = @AUTOHEADER@ +- ++am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + INSTALL = @INSTALL@ +-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +-INSTALL_DATA = @INSTALL_DATA@ +-INSTALL_SCRIPT = @INSTALL_SCRIPT@ +-transform = @program_transform_name@ +- ++install_sh_DATA = $(install_sh) -c -m 644 ++install_sh_PROGRAM = $(install_sh) -c ++install_sh_SCRIPT = $(install_sh) -c ++INSTALL_HEADER = $(INSTALL_DATA) ++transform = $(program_transform_name) + NORMAL_INSTALL = : + PRE_INSTALL = : + POST_INSTALL = : + NORMAL_UNINSTALL = : + PRE_UNINSTALL = : + POST_UNINSTALL = : +-host_alias = @host_alias@ ++build_triplet = @build@ + host_triplet = @host@ +-AS = @AS@ ++DIST_COMMON = README $(am__configure_deps) $(srcdir)/KXL.spec.in \ ++ $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ ++ $(top_srcdir)/configure COPYING ChangeLog config.guess \ ++ config.sub depcomp install-sh ltmain.sh missing ++subdir = . ++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 ++am__aclocal_m4_deps = $(top_srcdir)/configure.in ++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ ++ $(ACLOCAL_M4) ++am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ ++ configure.lineno configure.status.lineno ++mkinstalldirs = $(install_sh) -d ++CONFIG_CLEAN_FILES = KXL.spec ++SOURCES = ++DIST_SOURCES = ++RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ ++ html-recursive info-recursive install-data-recursive \ ++ install-exec-recursive install-info-recursive \ ++ install-recursive installcheck-recursive installdirs-recursive \ ++ pdf-recursive ps-recursive uninstall-info-recursive \ ++ uninstall-recursive ++am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; ++am__vpath_adj = case $$p in \ ++ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ ++ *) f=$$p;; \ ++ esac; ++am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; ++am__installdirs = "$(DESTDIR)$(aclocaldir)" ++aclocalDATA_INSTALL = $(INSTALL_DATA) ++DATA = $(aclocal_DATA) ++ETAGS = etags ++CTAGS = ctags ++DIST_SUBDIRS = $(SUBDIRS) ++DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++distdir = $(PACKAGE)-$(VERSION) ++top_distdir = $(distdir) ++am__remove_distdir = \ ++ { test ! -d $(distdir) \ ++ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ ++ && rm -fr $(distdir); }; } ++DIST_ARCHIVES = $(distdir).tar.gz ++GZIP_ENV = --best ++distuninstallcheck_listfiles = find . -type f -print ++distcleancheck_listfiles = find . -type f -print ++ACLOCAL = @ACLOCAL@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ ++AMTAR = @AMTAR@ ++AR = @AR@ ++AUTOCONF = @AUTOCONF@ ++AUTOHEADER = @AUTOHEADER@ ++AUTOMAKE = @AUTOMAKE@ ++AWK = @AWK@ + CC = @CC@ +-DLLTOOL = @DLLTOOL@ ++CCDEPMODE = @CCDEPMODE@ ++CFLAGS = @CFLAGS@ ++CPP = @CPP@ ++CPPFLAGS = @CPPFLAGS@ ++CXX = @CXX@ ++CXXCPP = @CXXCPP@ ++CXXDEPMODE = @CXXDEPMODE@ ++CXXFLAGS = @CXXFLAGS@ ++CYGPATH_W = @CYGPATH_W@ ++DEFS = @DEFS@ ++DEPDIR = @DEPDIR@ + ECHO = @ECHO@ ++ECHO_C = @ECHO_C@ ++ECHO_N = @ECHO_N@ ++ECHO_T = @ECHO_T@ ++EGREP = @EGREP@ + EXEEXT = @EXEEXT@ ++F77 = @F77@ ++FFLAGS = @FFLAGS@ ++INSTALL_DATA = @INSTALL_DATA@ ++INSTALL_PROGRAM = @INSTALL_PROGRAM@ ++INSTALL_SCRIPT = @INSTALL_SCRIPT@ ++INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ ++LDFLAGS = @LDFLAGS@ ++LIBOBJS = @LIBOBJS@ ++LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LN_S = @LN_S@ ++LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-OBJDUMP = @OBJDUMP@ + OBJEXT = @OBJEXT@ + PACKAGE = @PACKAGE@ ++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ ++PACKAGE_NAME = @PACKAGE_NAME@ ++PACKAGE_STRING = @PACKAGE_STRING@ ++PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_VERSION = @PACKAGE_VERSION@ ++PATH_SEPARATOR = @PATH_SEPARATOR@ + RANLIB = @RANLIB@ ++SET_MAKE = @SET_MAKE@ ++SHELL = @SHELL@ + STRIP = @STRIP@ + VERSION = @VERSION@ +- +-SUBDIRS = src docs ++X_CFLAGS = @X_CFLAGS@ ++X_EXTRA_LIBS = @X_EXTRA_LIBS@ ++X_LIBS = @X_LIBS@ ++X_PRE_LIBS = @X_PRE_LIBS@ ++ac_ct_AR = @ac_ct_AR@ ++ac_ct_CC = @ac_ct_CC@ ++ac_ct_CXX = @ac_ct_CXX@ ++ac_ct_F77 = @ac_ct_F77@ ++ac_ct_RANLIB = @ac_ct_RANLIB@ ++ac_ct_STRIP = @ac_ct_STRIP@ + aclocaldir = @aclocaldir@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ ++am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ ++am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ ++am__include = @am__include@ ++am__leading_dot = @am__leading_dot@ ++am__quote = @am__quote@ ++am__tar = @am__tar@ ++am__untar = @am__untar@ ++bindir = @bindir@ ++build = @build@ ++build_alias = @build_alias@ ++build_cpu = @build_cpu@ ++build_os = @build_os@ ++build_vendor = @build_vendor@ ++datadir = @datadir@ ++exec_prefix = @exec_prefix@ ++host = @host@ ++host_alias = @host_alias@ ++host_cpu = @host_cpu@ ++host_os = @host_os@ ++host_vendor = @host_vendor@ ++includedir = @includedir@ ++infodir = @infodir@ ++install_sh = @install_sh@ ++libdir = @libdir@ ++libexecdir = @libexecdir@ ++localstatedir = @localstatedir@ ++mandir = @mandir@ ++mkdir_p = @mkdir_p@ ++oldincludedir = @oldincludedir@ ++prefix = @prefix@ ++program_transform_name = @program_transform_name@ ++sbindir = @sbindir@ ++sharedstatedir = @sharedstatedir@ ++sysconfdir = @sysconfdir@ ++target_alias = @target_alias@ ++SUBDIRS = src docs + aclocal_DATA = KXL.m4 + EXTRA_DIST = COPYING ChangeLog README KXL.m4 +-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +-CONFIG_CLEAN_FILES = KXL.spec +-DATA = $(aclocal_DATA) +- +-DIST_COMMON = README COPYING ChangeLog KXL.spec.in Makefile.am \ +-Makefile.in aclocal.m4 config.guess config.sub configure configure.in \ +-install-sh ltmain.sh missing mkinstalldirs +- ++all: all-recursive + +-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) +- +-TAR = gtar +-GZIP_ENV = --best +-all: all-redirect + .SUFFIXES: +-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) +- cd $(top_srcdir) && $(AUTOMAKE) --foreign --include-deps Makefile +- +-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +- cd $(top_builddir) \ +- && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status +- +-$(ACLOCAL_M4): configure.in +- cd $(srcdir) && $(ACLOCAL) ++am--refresh: ++ @: ++$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) ++ @for dep in $?; do \ ++ case '$(am__configure_deps)' in \ ++ *$$dep*) \ ++ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \ ++ cd $(srcdir) && $(AUTOMAKE) --foreign \ ++ && exit 0; \ ++ exit 1;; \ ++ esac; \ ++ done; \ ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ ++ cd $(top_srcdir) && \ ++ $(AUTOMAKE) --foreign Makefile ++.PRECIOUS: Makefile ++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status ++ @case '$?' in \ ++ *config.status*) \ ++ echo ' $(SHELL) ./config.status'; \ ++ $(SHELL) ./config.status;; \ ++ *) \ ++ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ ++ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ ++ esac; + +-config.status: $(srcdir)/configure.in $(CONFIG_STATUS_DEPENDENCIES) ++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck +-$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) ++ ++$(top_srcdir)/configure: $(am__configure_deps) + cd $(srcdir) && $(AUTOCONF) +-KXL.spec: $(top_builddir)/config.status KXL.spec.in +- cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status ++$(ACLOCAL_M4): $(am__aclocal_m4_deps) ++ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) ++KXL.spec: $(top_builddir)/config.status $(srcdir)/KXL.spec.in ++ cd $(top_builddir) && $(SHELL) ./config.status $@ ++ ++mostlyclean-libtool: ++ -rm -f *.lo + ++clean-libtool: ++ -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + install-aclocalDATA: $(aclocal_DATA) + @$(NORMAL_INSTALL) +- $(mkinstalldirs) $(DESTDIR)$(aclocaldir) ++ test -z "$(aclocaldir)" || $(mkdir_p) "$(DESTDIR)$(aclocaldir)" + @list='$(aclocal_DATA)'; for p in $$list; do \ +- if test -f $(srcdir)/$$p; then \ +- echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(aclocaldir)/$$p"; \ +- $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(aclocaldir)/$$p; \ +- else if test -f $$p; then \ +- echo " $(INSTALL_DATA) $$p $(DESTDIR)$(aclocaldir)/$$p"; \ +- $(INSTALL_DATA) $$p $(DESTDIR)$(aclocaldir)/$$p; \ +- fi; fi; \ ++ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ ++ f=$(am__strip_dir) \ ++ echo " $(aclocalDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(aclocaldir)/$$f'"; \ ++ $(aclocalDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(aclocaldir)/$$f"; \ + done + + uninstall-aclocalDATA: + @$(NORMAL_UNINSTALL) +- list='$(aclocal_DATA)'; for p in $$list; do \ +- rm -f $(DESTDIR)$(aclocaldir)/$$p; \ ++ @list='$(aclocal_DATA)'; for p in $$list; do \ ++ f=$(am__strip_dir) \ ++ echo " rm -f '$(DESTDIR)$(aclocaldir)/$$f'"; \ ++ rm -f "$(DESTDIR)$(aclocaldir)/$$f"; \ + done + + # This directory's subdirectories are mostly independent; you can cd +@@ -136,13 +256,14 @@ + # (1) if the variable is set in `config.status', edit `config.status' + # (which will cause the Makefiles to be regenerated when you run `make'); + # (2) otherwise, pass the desired values on the `make' command line. +- +-@SET_MAKE@ +- +-all-recursive install-data-recursive install-exec-recursive \ +-installdirs-recursive install-recursive uninstall-recursive \ +-check-recursive installcheck-recursive info-recursive dvi-recursive: +- @set fnord $(MAKEFLAGS); amf=$$2; \ ++$(RECURSIVE_TARGETS): ++ @failcom='exit 1'; \ ++ for f in x $$MAKEFLAGS; do \ ++ case $$f in \ ++ *=* | --[!k]*);; \ ++ *k*) failcom='fail=yes';; \ ++ esac; \ ++ done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ +@@ -154,7 +275,7 @@ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ +- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ ++ || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ +@@ -162,13 +283,24 @@ + + mostlyclean-recursive clean-recursive distclean-recursive \ + maintainer-clean-recursive: +- @set fnord $(MAKEFLAGS); amf=$$2; \ ++ @failcom='exit 1'; \ ++ for f in x $$MAKEFLAGS; do \ ++ case $$f in \ ++ *=* | --[!k]*);; \ ++ *k*) failcom='fail=yes';; \ ++ esac; \ ++ done; \ + dot_seen=no; \ +- rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ +- rev="$$subdir $$rev"; \ +- test "$$subdir" = "." && dot_seen=yes; \ ++ case "$@" in \ ++ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ ++ *) list='$(SUBDIRS)' ;; \ ++ esac; \ ++ rev=''; for subdir in $$list; do \ ++ if test "$$subdir" = "."; then :; else \ ++ rev="$$subdir $$rev"; \ ++ fi; \ + done; \ +- test "$$dot_seen" = "no" && rev=". $$rev"; \ ++ rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ +@@ -178,177 +310,319 @@ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ +- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ ++ || eval $$failcom; \ + done && test -z "$$fail" + tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done ++ctags-recursive: ++ list='$(SUBDIRS)'; for subdir in $$list; do \ ++ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ ++ done + +-tags: TAGS +- +-ID: $(HEADERS) $(SOURCES) $(LISP) +- list='$(SOURCES) $(HEADERS)'; \ +- unique=`for i in $$list; do echo $$i; done | \ +- awk ' { files[$$0] = 1; } \ ++ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) ++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ ++ unique=`for i in $$list; do \ ++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ++ done | \ ++ $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ +- here=`pwd` && cd $(srcdir) \ +- && mkid -f$$here/ID $$unique $(LISP) ++ mkid -fID $$unique ++tags: TAGS + +-TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) ++TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ ++ $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ ++ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ ++ include_option=--etags-include; \ ++ empty_fix=.; \ ++ else \ ++ include_option=--include; \ ++ empty_fix=; \ ++ fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ +- if test "$$subdir" = .; then :; else \ +- test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ +- fi; \ ++ if test "$$subdir" = .; then :; else \ ++ test ! -f $$subdir/TAGS || \ ++ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ ++ fi; \ + done; \ +- list='$(SOURCES) $(HEADERS)'; \ +- unique=`for i in $$list; do echo $$i; done | \ +- awk ' { files[$$0] = 1; } \ ++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ ++ unique=`for i in $$list; do \ ++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ++ done | \ ++ $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ +- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ +- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) +- +-mostlyclean-tags: +- +-clean-tags: ++ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ test -n "$$unique" || unique=$$empty_fix; \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$tags $$unique; \ ++ fi ++ctags: CTAGS ++CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ ++ $(TAGS_FILES) $(LISP) ++ tags=; \ ++ here=`pwd`; \ ++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ ++ unique=`for i in $$list; do \ ++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ++ done | \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ ++ test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ ++ $$tags $$unique ++ ++GTAGS: ++ here=`$(am__cd) $(top_builddir) && pwd` \ ++ && cd $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) $$here + + distclean-tags: +- -rm -f TAGS ID ++ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +-maintainer-clean-tags: +- +-distdir = $(PACKAGE)-$(VERSION) +-top_distdir = $(distdir) +- +-# This target untars the dist file and tries a VPATH configuration. Then +-# it guarantees that the distribution is self-contained by making another +-# tarfile. +-distcheck: dist +- -rm -rf $(distdir) +- GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz +- mkdir $(distdir)/=build +- mkdir $(distdir)/=inst +- dc_install_base=`cd $(distdir)/=inst && pwd`; \ +- cd $(distdir)/=build \ +- && ../configure --srcdir=.. --prefix=$$dc_install_base \ +- && $(MAKE) $(AM_MAKEFLAGS) \ +- && $(MAKE) $(AM_MAKEFLAGS) dvi \ +- && $(MAKE) $(AM_MAKEFLAGS) check \ +- && $(MAKE) $(AM_MAKEFLAGS) install \ +- && $(MAKE) $(AM_MAKEFLAGS) installcheck \ +- && $(MAKE) $(AM_MAKEFLAGS) dist +- -rm -rf $(distdir) +- @banner="$(distdir).tar.gz is ready for distribution"; \ +- dashes=`echo "$$banner" | sed s/./=/g`; \ +- echo "$$dashes"; \ +- echo "$$banner"; \ +- echo "$$dashes" +-dist: distdir +- -chmod -R a+r $(distdir) +- GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) +- -rm -rf $(distdir) +-dist-all: distdir +- -chmod -R a+r $(distdir) +- GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) +- -rm -rf $(distdir) + distdir: $(DISTFILES) +- -rm -rf $(distdir) ++ $(am__remove_distdir) + mkdir $(distdir) +- -chmod 777 $(distdir) +- @for file in $(DISTFILES); do \ +- d=$(srcdir); \ ++ $(mkdir_p) $(distdir)/. ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ ++ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- cp -pr $$d/$$file $(distdir)/$$file; \ ++ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ ++ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ fi; \ ++ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ +- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ +- || cp -p $$d/$$file $(distdir)/$$file || :; \ ++ || cp -p $$d/$$file $(distdir)/$$file \ ++ || exit 1; \ + fi; \ + done +- for subdir in $(SUBDIRS); do \ ++ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ +- test -d $(distdir)/$$subdir \ +- || mkdir $(distdir)/$$subdir \ ++ test -d "$(distdir)/$$subdir" \ ++ || $(mkdir_p) "$(distdir)/$$subdir" \ + || exit 1; \ +- chmod 777 $(distdir)/$$subdir; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \ ++ distdir=`$(am__cd) $(distdir) && pwd`; \ ++ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ ++ (cd $$subdir && \ ++ $(MAKE) $(AM_MAKEFLAGS) \ ++ top_distdir="$$top_distdir" \ ++ distdir="$$distdir/$$subdir" \ ++ distdir) \ + || exit 1; \ + fi; \ + done +-info-am: +-info: info-recursive +-dvi-am: +-dvi: dvi-recursive ++ -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ ++ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ++ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ++ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ ++ || chmod -R a+r $(distdir) ++dist-gzip: distdir ++ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz ++ $(am__remove_distdir) ++ ++dist-bzip2: distdir ++ tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 ++ $(am__remove_distdir) ++ ++dist-tarZ: distdir ++ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z ++ $(am__remove_distdir) ++ ++dist-shar: distdir ++ shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz ++ $(am__remove_distdir) ++ ++dist-zip: distdir ++ -rm -f $(distdir).zip ++ zip -rq $(distdir).zip $(distdir) ++ $(am__remove_distdir) ++ ++dist dist-all: distdir ++ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz ++ $(am__remove_distdir) ++ ++# This target untars the dist file and tries a VPATH configuration. Then ++# it guarantees that the distribution is self-contained by making another ++# tarfile. ++distcheck: dist ++ case '$(DIST_ARCHIVES)' in \ ++ *.tar.gz*) \ ++ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ ++ *.tar.bz2*) \ ++ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ ++ *.tar.Z*) \ ++ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ ++ *.shar.gz*) \ ++ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ ++ *.zip*) \ ++ unzip $(distdir).zip ;;\ ++ esac ++ chmod -R a-w $(distdir); chmod a+w $(distdir) ++ mkdir $(distdir)/_build ++ mkdir $(distdir)/_inst ++ chmod a-w $(distdir) ++ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ ++ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ ++ && cd $(distdir)/_build \ ++ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ ++ $(DISTCHECK_CONFIGURE_FLAGS) \ ++ && $(MAKE) $(AM_MAKEFLAGS) \ ++ && $(MAKE) $(AM_MAKEFLAGS) dvi \ ++ && $(MAKE) $(AM_MAKEFLAGS) check \ ++ && $(MAKE) $(AM_MAKEFLAGS) install \ ++ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ ++ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ ++ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ ++ distuninstallcheck \ ++ && chmod -R a-w "$$dc_install_base" \ ++ && ({ \ ++ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ ++ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ ++ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ ++ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ ++ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ ++ } || { rm -rf "$$dc_destdir"; exit 1; }) \ ++ && rm -rf "$$dc_destdir" \ ++ && $(MAKE) $(AM_MAKEFLAGS) dist \ ++ && rm -rf $(DIST_ARCHIVES) \ ++ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck ++ $(am__remove_distdir) ++ @(echo "$(distdir) archives ready for distribution: "; \ ++ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ ++ sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' ++distuninstallcheck: ++ @cd $(distuninstallcheck_dir) \ ++ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ ++ || { echo "ERROR: files left after uninstall:" ; \ ++ if test -n "$(DESTDIR)"; then \ ++ echo " (check DESTDIR support)"; \ ++ fi ; \ ++ $(distuninstallcheck_listfiles) ; \ ++ exit 1; } >&2 ++distcleancheck: distclean ++ @if test '$(srcdir)' = . ; then \ ++ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ ++ exit 1 ; \ ++ fi ++ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ ++ || { echo "ERROR: files left in build directory after distclean:" ; \ ++ $(distcleancheck_listfiles) ; \ ++ exit 1; } >&2 + check-am: all-am + check: check-recursive +-installcheck-am: +-installcheck: installcheck-recursive +-install-exec-am: ++all-am: Makefile $(DATA) ++installdirs: installdirs-recursive ++installdirs-am: ++ for dir in "$(DESTDIR)$(aclocaldir)"; do \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ ++ done ++install: install-recursive + install-exec: install-exec-recursive +- +-install-data-am: install-aclocalDATA + install-data: install-data-recursive ++uninstall: uninstall-recursive + + install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +-install: install-recursive +-uninstall-am: uninstall-aclocalDATA +-uninstall: uninstall-recursive +-all-am: Makefile $(DATA) +-all-redirect: all-recursive +-install-strip: +- $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +-installdirs: installdirs-recursive +-installdirs-am: +- $(mkinstalldirs) $(DESTDIR)$(aclocaldir) +- + ++installcheck: installcheck-recursive ++install-strip: ++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ ++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ ++ `test -z '$(STRIP)' || \ ++ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + mostlyclean-generic: + + clean-generic: + + distclean-generic: +- -rm -f Makefile $(CONFIG_CLEAN_FILES) +- -rm -f config.cache config.log stamp-h stamp-h[0-9]* ++ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + + maintainer-clean-generic: +-mostlyclean-am: mostlyclean-tags mostlyclean-generic ++ @echo "This command is intended for maintainers to use" ++ @echo "it deletes files that may require special tools to rebuild." ++clean: clean-recursive + +-mostlyclean: mostlyclean-recursive ++clean-am: clean-generic clean-libtool mostlyclean-am + +-clean-am: clean-tags clean-generic mostlyclean-am ++distclean: distclean-recursive ++ -rm -f $(am__CONFIG_DISTCLEAN_FILES) ++ -rm -f Makefile ++distclean-am: clean-am distclean-generic distclean-libtool \ ++ distclean-tags + +-clean: clean-recursive ++dvi: dvi-recursive + +-distclean-am: distclean-tags distclean-generic clean-am +- -rm -f libtool ++dvi-am: + +-distclean: distclean-recursive +- -rm -f config.status ++html: html-recursive + +-maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \ +- distclean-am +- @echo "This command is intended for maintainers to use;" +- @echo "it deletes files that may require special tools to rebuild." ++info: info-recursive ++ ++info-am: ++ ++install-data-am: install-aclocalDATA ++ ++install-exec-am: ++ ++install-info: install-info-recursive ++ ++install-man: ++ ++installcheck-am: + + maintainer-clean: maintainer-clean-recursive +- -rm -f config.status ++ -rm -f $(am__CONFIG_DISTCLEAN_FILES) ++ -rm -rf $(top_srcdir)/autom4te.cache ++ -rm -f Makefile ++maintainer-clean-am: distclean-am maintainer-clean-generic ++ ++mostlyclean: mostlyclean-recursive ++ ++mostlyclean-am: mostlyclean-generic mostlyclean-libtool ++ ++pdf: pdf-recursive ++ ++pdf-am: + +-.PHONY: uninstall-aclocalDATA install-aclocalDATA install-data-recursive \ +-uninstall-data-recursive install-exec-recursive \ +-uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \ +-all-recursive check-recursive installcheck-recursive info-recursive \ +-dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \ +-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ +-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ +-dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ +-install-exec install-data-am install-data install-am install \ +-uninstall-am uninstall all-redirect all-am all installdirs-am \ +-installdirs mostlyclean-generic distclean-generic clean-generic \ +-maintainer-clean-generic clean mostlyclean distclean maintainer-clean ++ps: ps-recursive + ++ps-am: ++ ++uninstall-am: uninstall-aclocalDATA uninstall-info-am ++ ++uninstall-info: uninstall-info-recursive ++ ++.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ ++ check-am clean clean-generic clean-libtool clean-recursive \ ++ ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ ++ dist-shar dist-tarZ dist-zip distcheck distclean \ ++ distclean-generic distclean-libtool distclean-recursive \ ++ distclean-tags distcleancheck distdir distuninstallcheck dvi \ ++ dvi-am html html-am info info-am install install-aclocalDATA \ ++ install-am install-data install-data-am install-exec \ ++ install-exec-am install-info install-info-am install-man \ ++ install-strip installcheck installcheck-am installdirs \ ++ installdirs-am maintainer-clean maintainer-clean-generic \ ++ maintainer-clean-recursive mostlyclean mostlyclean-generic \ ++ mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \ ++ tags tags-recursive uninstall uninstall-aclocalDATA \ ++ uninstall-am uninstall-info-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +Index: kxl-1.1.7/aclocal.m4 +=================================================================== +--- kxl-1.1.7.orig/aclocal.m4 2003-02-14 08:25:20.000000000 +0100 ++++ kxl-1.1.7/aclocal.m4 2006-05-09 18:50:56.000000000 +0200 +@@ -1,112 +1,73 @@ +-dnl aclocal.m4 generated automatically by aclocal 1.4-p4 ++# generated automatically by aclocal 1.9.6 -*- Autoconf -*- + +-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +-dnl This file is free software; the Free Software Foundation +-dnl gives unlimited permission to copy and/or distribute it, +-dnl with or without modifications, as long as this notice is preserved. +- +-dnl This program is distributed in the hope that it will be useful, +-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without +-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A +-dnl PARTICULAR PURPOSE. +- +-# Do all the work for Automake. This macro actually does too much -- +-# some checks are only needed if your package does certain things. +-# But this isn't really a big deal. +- +-# serial 1 +- +-dnl Usage: +-dnl AM_INIT_AUTOMAKE(package,version, [no-define]) +- +-AC_DEFUN(AM_INIT_AUTOMAKE, +-[AC_REQUIRE([AC_PROG_INSTALL]) +-PACKAGE=[$1] +-AC_SUBST(PACKAGE) +-VERSION=[$2] +-AC_SUBST(VERSION) +-dnl test to see if srcdir already configured +-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then +- AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) +-fi +-ifelse([$3],, +-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) +-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])) +-AC_REQUIRE([AM_SANITY_CHECK]) +-AC_REQUIRE([AC_ARG_PROGRAM]) +-dnl FIXME This is truly gross. +-missing_dir=`cd $ac_aux_dir && pwd` +-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir) +-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) +-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir) +-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) +-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) +-AC_REQUIRE([AC_PROG_MAKE_SET])]) ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, ++# 2005 Free Software Foundation, Inc. ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-# +-# Check to make sure that the build environment is sane. +-# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY, to the extent permitted by law; without ++# even the implied warranty of MERCHANTABILITY or FITNESS FOR A ++# PARTICULAR PURPOSE. + +-AC_DEFUN(AM_SANITY_CHECK, +-[AC_MSG_CHECKING([whether build environment is sane]) +-# Just in case +-sleep 1 +-echo timestamp > conftestfile +-# Do `set' in a subshell so we don't clobber the current shell's +-# arguments. Must try -L first in case configure is actually a +-# symlink; some systems play weird games with the mod time of symlinks +-# (eg FreeBSD returns the mod time of the symlink's containing +-# directory). +-if ( +- set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` +- if test "[$]*" = "X"; then +- # -L didn't work. +- set X `ls -t $srcdir/configure conftestfile` +- fi +- if test "[$]*" != "X $srcdir/configure conftestfile" \ +- && test "[$]*" != "X conftestfile $srcdir/configure"; then ++# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- + +- # If neither matched, then we have a broken ls. This can happen +- # if, for instance, CONFIG_SHELL is bash and it inherits a +- # broken ls alias from the environment. This has actually +- # happened. Such a system could not be considered "sane". +- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +-alias in your environment]) +- fi ++# serial 48 Debian 1.5.22-4 AC_PROG_LIBTOOL + +- test "[$]2" = conftestfile +- ) +-then +- # Ok. +- : +-else +- AC_MSG_ERROR([newly created file is older than distributed files! +-Check your system clock]) +-fi +-rm -f conftest* +-AC_MSG_RESULT(yes)]) + +-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) +-dnl The program must properly implement --version. +-AC_DEFUN(AM_MISSING_PROG, +-[AC_MSG_CHECKING(for working $2) +-# Run test in a subshell; some versions of sh will print an error if +-# an executable is not found, even if stderr is redirected. +-# Redirect stdin to placate older versions of autoconf. Sigh. +-if ($2 --version) < /dev/null > /dev/null 2>&1; then +- $1=$2 +- AC_MSG_RESULT(found) +-else +- $1="$3/missing $2" +- AC_MSG_RESULT(missing) +-fi +-AC_SUBST($1)]) ++# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) ++# ----------------------------------------------------------- ++# If this macro is not defined by Autoconf, define it here. ++m4_ifdef([AC_PROVIDE_IFELSE], ++ [], ++ [m4_define([AC_PROVIDE_IFELSE], ++ [m4_ifdef([AC_PROVIDE_$1], ++ [$2], [$3])])]) + +-# libtool.m4 - Configure libtool for the host system. -*-Shell-script-*- + +-# serial 46 AC_PROG_LIBTOOL ++# AC_PROG_LIBTOOL ++# --------------- + AC_DEFUN([AC_PROG_LIBTOOL], ++[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl ++dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX ++dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. ++ AC_PROVIDE_IFELSE([AC_PROG_CXX], ++ [AC_LIBTOOL_CXX], ++ [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX ++ ])]) ++dnl And a similar setup for Fortran 77 support ++ AC_PROVIDE_IFELSE([AC_PROG_F77], ++ [AC_LIBTOOL_F77], ++ [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77 ++])]) ++ ++dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. ++dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run ++dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. ++ AC_PROVIDE_IFELSE([AC_PROG_GCJ], ++ [AC_LIBTOOL_GCJ], ++ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], ++ [AC_LIBTOOL_GCJ], ++ [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], ++ [AC_LIBTOOL_GCJ], ++ [ifdef([AC_PROG_GCJ], ++ [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) ++ ifdef([A][M_PROG_GCJ], ++ [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) ++ ifdef([LT_AC_PROG_GCJ], ++ [define([LT_AC_PROG_GCJ], ++ defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) ++])])# AC_PROG_LIBTOOL ++ ++ ++# _AC_PROG_LIBTOOL ++# ---------------- ++AC_DEFUN([_AC_PROG_LIBTOOL], + [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl ++AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl ++AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl ++AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl + + # This can be used to rebuild libtool when needed + LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" +@@ -117,10 +78,13 @@ + + # Prevent multiple expansion + define([AC_PROG_LIBTOOL], []) +-]) ++])# _AC_PROG_LIBTOOL ++ + ++# AC_LIBTOOL_SETUP ++# ---------------- + AC_DEFUN([AC_LIBTOOL_SETUP], +-[AC_PREREQ(2.13)dnl ++[AC_PREREQ(2.50)dnl + AC_REQUIRE([AC_ENABLE_SHARED])dnl + AC_REQUIRE([AC_ENABLE_STATIC])dnl + AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl +@@ -130,13 +94,106 @@ + AC_REQUIRE([AC_PROG_LD])dnl + AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl + AC_REQUIRE([AC_PROG_NM])dnl ++ + AC_REQUIRE([AC_PROG_LN_S])dnl + AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl ++# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! + AC_REQUIRE([AC_OBJEXT])dnl + AC_REQUIRE([AC_EXEEXT])dnl + dnl + ++AC_LIBTOOL_SYS_MAX_CMD_LEN ++AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE ++AC_LIBTOOL_OBJDIR ++ ++AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl + _LT_AC_PROG_ECHO_BACKSLASH ++ ++case $host_os in ++aix3*) ++ # AIX sometimes has problems with the GCC collect2 program. For some ++ # reason, if we set the COLLECT_NAMES environment variable, the problems ++ # vanish in a puff of smoke. ++ if test "X${COLLECT_NAMES+set}" != Xset; then ++ COLLECT_NAMES= ++ export COLLECT_NAMES ++ fi ++ ;; ++esac ++ ++# Sed substitution that helps us do robust quoting. It backslashifies ++# metacharacters that are still active within double-quoted strings. ++Xsed='sed -e 1s/^X//' ++[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] ++ ++# Same as above, but do not quote variable references. ++[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] ++ ++# Sed substitution to delay expansion of an escaped shell variable in a ++# double_quote_subst'ed string. ++delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' ++ ++# Sed substitution to avoid accidental globbing in evaled expressions ++no_glob_subst='s/\*/\\\*/g' ++ ++# Constants: ++rm="rm -f" ++ ++# Global variables: ++default_ofile=libtool ++can_build_shared=yes ++ ++# All known linkers require a `.a' archive for static linking (except MSVC, ++# which needs '.lib'). ++libext=a ++ltmain="$ac_aux_dir/ltmain.sh" ++ofile="$default_ofile" ++with_gnu_ld="$lt_cv_prog_gnu_ld" ++ ++AC_CHECK_TOOL(AR, ar, false) ++AC_CHECK_TOOL(RANLIB, ranlib, :) ++AC_CHECK_TOOL(STRIP, strip, :) ++ ++old_CC="$CC" ++old_CFLAGS="$CFLAGS" ++ ++# Set sane defaults for various variables ++test -z "$AR" && AR=ar ++test -z "$AR_FLAGS" && AR_FLAGS=cru ++test -z "$AS" && AS=as ++test -z "$CC" && CC=cc ++test -z "$LTCC" && LTCC=$CC ++test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS ++test -z "$DLLTOOL" && DLLTOOL=dlltool ++test -z "$LD" && LD=ld ++test -z "$LN_S" && LN_S="ln -s" ++test -z "$MAGIC_CMD" && MAGIC_CMD=file ++test -z "$NM" && NM=nm ++test -z "$SED" && SED=sed ++test -z "$OBJDUMP" && OBJDUMP=objdump ++test -z "$RANLIB" && RANLIB=: ++test -z "$STRIP" && STRIP=: ++test -z "$ac_objext" && ac_objext=o ++ ++# Determine commands to create old-style static archives. ++old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' ++old_postinstall_cmds='chmod 644 $oldlib' ++old_postuninstall_cmds= ++ ++if test -n "$RANLIB"; then ++ case $host_os in ++ openbsd*) ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" ++ ;; ++ *) ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" ++ ;; ++ esac ++ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" ++fi ++ ++_LT_CC_BASENAME([$compiler]) ++ + # Only perform the check for file, if the check method requires it + case $deplibs_check_method in + file_magic*) +@@ -146,346 +203,174 @@ + ;; + esac + +-AC_CHECK_TOOL(RANLIB, ranlib, :) +-AC_CHECK_TOOL(STRIP, strip, :) +- +-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) +-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], ++AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) ++AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], + enable_win32_dll=yes, enable_win32_dll=no) + +-AC_ARG_ENABLE(libtool-lock, +- [ --disable-libtool-lock avoid locking (might break parallel builds)]) ++AC_ARG_ENABLE([libtool-lock], ++ [AC_HELP_STRING([--disable-libtool-lock], ++ [avoid locking (might break parallel builds)])]) + test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +-# Some flags need to be propagated to the compiler or linker for good +-# libtool support. +-case $host in +-*-*-irix6*) +- # Find out which ABI we are using. +- echo '[#]line __oline__ "configure"' > conftest.$ac_ext +- if AC_TRY_EVAL(ac_compile); then +- case `/usr/bin/file conftest.$ac_objext` in +- *32-bit*) +- LD="${LD-ld} -32" +- ;; +- *N32*) +- LD="${LD-ld} -n32" +- ;; +- *64-bit*) +- LD="${LD-ld} -64" +- ;; +- esac +- fi +- rm -rf conftest* +- ;; ++AC_ARG_WITH([pic], ++ [AC_HELP_STRING([--with-pic], ++ [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], ++ [pic_mode="$withval"], ++ [pic_mode=default]) ++test -z "$pic_mode" && pic_mode=default + +-*-*-sco3.2v5*) +- # On SCO OpenServer 5, we need -belf to get full-featured binaries. +- SAVE_CFLAGS="$CFLAGS" +- CFLAGS="$CFLAGS -belf" +- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, +- [AC_LANG_SAVE +- AC_LANG_C +- AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) +- AC_LANG_RESTORE]) +- if test x"$lt_cv_cc_needs_belf" != x"yes"; then +- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf +- CFLAGS="$SAVE_CFLAGS" +- fi +- ;; ++# Use C for the default configuration in the libtool script ++tagname= ++AC_LIBTOOL_LANG_C_CONFIG ++_LT_AC_TAGCONFIG ++])# AC_LIBTOOL_SETUP + +-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], +-[*-*-cygwin* | *-*-mingw* | *-*-pw32*) +- AC_CHECK_TOOL(DLLTOOL, dlltool, false) +- AC_CHECK_TOOL(AS, as, false) +- AC_CHECK_TOOL(OBJDUMP, objdump, false) + +- # recent cygwin and mingw systems supply a stub DllMain which the user +- # can override, but on older systems we have to supply one +- AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain, +- [AC_TRY_LINK([], +- [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*); +- DllMain (0, 0, 0);], +- [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])]) +- +- case $host/$CC in +- *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*) +- # old mingw systems require "-dll" to link a DLL, while more recent ones +- # require "-mdll" +- SAVE_CFLAGS="$CFLAGS" +- CFLAGS="$CFLAGS -mdll" +- AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch, +- [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])]) +- CFLAGS="$SAVE_CFLAGS" ;; +- *-*-cygwin* | *-*-pw32*) +- # cygwin systems need to pass --dll to the linker, and not link +- # crt.o which will require a WinMain@16 definition. +- lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;; +- esac +- ;; +- ]) +-esac ++# _LT_AC_SYS_COMPILER ++# ------------------- ++AC_DEFUN([_LT_AC_SYS_COMPILER], ++[AC_REQUIRE([AC_PROG_CC])dnl + +-_LT_AC_LTCONFIG_HACK ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} + +-]) ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +-# _LT_AC_CHECK_DLFCN +-# -------------------- +-AC_DEFUN(_LT_AC_CHECK_DLFCN, +-[AC_CHECK_HEADERS(dlfcn.h) +-])# _LT_AC_CHECK_DLFCN ++# Allow CC to be a program name with arguments. ++compiler=$CC ++])# _LT_AC_SYS_COMPILER + +-# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +-# --------------------------------- +-AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], +-[AC_REQUIRE([AC_CANONICAL_HOST]) +-AC_REQUIRE([AC_PROG_NM]) +-AC_REQUIRE([AC_OBJEXT]) +-# Check for command to grab the raw symbol name followed by C symbol from nm. +-AC_MSG_CHECKING([command to parse $NM output]) +-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [dnl + +-# These are sane defaults that work on at least a few old systems. +-# [They come from Ultrix. What could be older than Ultrix?!! ;)] ++# _LT_CC_BASENAME(CC) ++# ------------------- ++# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. ++AC_DEFUN([_LT_CC_BASENAME], ++[for cc_temp in $1""; do ++ case $cc_temp in ++ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; ++ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++]) + +-# Character class describing NM global symbol codes. +-[symcode='[BCDEGRST]'] + +-# Regexp to match symbols that can be accessed directly from C. +-[sympat='\([_A-Za-z][_A-Za-z0-9]*\)'] ++# _LT_COMPILER_BOILERPLATE ++# ------------------------ ++# Check for compiler boilerplate output or warnings with ++# the simple compiler test code. ++AC_DEFUN([_LT_COMPILER_BOILERPLATE], ++[ac_outfile=conftest.$ac_objext ++printf "$lt_simple_compile_test_code" >conftest.$ac_ext ++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_compiler_boilerplate=`cat conftest.err` ++$rm conftest* ++])# _LT_COMPILER_BOILERPLATE ++ ++ ++# _LT_LINKER_BOILERPLATE ++# ---------------------- ++# Check for linker boilerplate output or warnings with ++# the simple link test code. ++AC_DEFUN([_LT_LINKER_BOILERPLATE], ++[ac_outfile=conftest.$ac_objext ++printf "$lt_simple_link_test_code" >conftest.$ac_ext ++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_linker_boilerplate=`cat conftest.err` ++$rm conftest* ++])# _LT_LINKER_BOILERPLATE ++ ++ ++# _LT_AC_SYS_LIBPATH_AIX ++# ---------------------- ++# Links a minimal program and checks the executable ++# for the system default hardcoded library path. In most cases, ++# this is /usr/lib:/lib, but when the MPI compilers are used ++# the location of the communication and MPI libs are included too. ++# If we don't find anything, use the default library path according ++# to the aix ld manual. ++AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], ++[AC_LINK_IFELSE(AC_LANG_PROGRAM,[ ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'`; fi],[]) ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++])# _LT_AC_SYS_LIBPATH_AIX ++ ++ ++# _LT_AC_SHELL_INIT(ARG) ++# ---------------------- ++AC_DEFUN([_LT_AC_SHELL_INIT], ++[ifdef([AC_DIVERSION_NOTICE], ++ [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], ++ [AC_DIVERT_PUSH(NOTICE)]) ++$1 ++AC_DIVERT_POP ++])# _LT_AC_SHELL_INIT + +-# Transform the above into a raw symbol and a C symbol. +-symxfrm='\1 \2\3 \3' + +-# Transform an extracted symbol line into a proper C declaration +-lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" ++# _LT_AC_PROG_ECHO_BACKSLASH ++# -------------------------- ++# Add some code to the start of the generated configure script which ++# will find an echo command which doesn't interpret backslashes. ++AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], ++[_LT_AC_SHELL_INIT([ ++# Check that we are running under the correct shell. ++SHELL=${CONFIG_SHELL-/bin/sh} + +-# Define system-specific variables. +-case $host_os in +-aix*) +- [symcode='[BCDT]'] +- ;; +-cygwin* | mingw* | pw32*) +- [symcode='[ABCDGISTW]'] +- ;; +-hpux*) # Its linker distinguishes data from code symbols +- lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" +- ;; +-irix*) +- [symcode='[BCDEGRST]'] +- ;; +-solaris* | sysv5*) +- [symcode='[BDT]'] +- ;; +-sysv4) +- [symcode='[DFNSTU]'] ++case X$ECHO in ++X*--fallback-echo) ++ # Remove one level of quotation (which was required for Make). ++ ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` + ;; + esac + +-# Handle CRLF in mingw tool chain +-opt_cr= +-case $host_os in +-mingw*) +- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp +- ;; +-esac ++echo=${ECHO-echo} ++if test "X[$]1" = X--no-reexec; then ++ # Discard the --no-reexec flag, and continue. ++ shift ++elif test "X[$]1" = X--fallback-echo; then ++ # Avoid inline document here, it may be left over ++ : ++elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then ++ # Yippee, $echo works! ++ : ++else ++ # Restart under the correct shell. ++ exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} ++fi + +-# If we're using GNU nm, then use its standard symbol codes. +-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then +- [symcode='[ABCDGISTW]'] ++if test "X[$]1" = X--fallback-echo; then ++ # used as fallback echo ++ shift ++ cat </dev/null 2>&1 && unset CDPATH + +- # Write the raw and C identifiers. +-[lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"] +- +- # Check to see that the pipe works correctly. +- pipe_works=no +- rm -f conftest* +- cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then +- # Try sorting and uniquifying the output. +- if sort "$nlist" | uniq > "$nlist"T; then +- mv -f "$nlist"T "$nlist" +- else +- rm -f "$nlist"T +- fi +- +- # Make sure that we snagged all the symbols we need. +- if egrep ' nm_test_var$' "$nlist" >/dev/null; then +- if egrep ' nm_test_func$' "$nlist" >/dev/null; then +- cat < conftest.$ac_ext +-#ifdef __cplusplus +-extern "C" { +-#endif +- +-EOF +- # Now generate the symbol file. +- eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext' +- +- cat <> conftest.$ac_ext +-#if defined (__STDC__) && __STDC__ +-# define lt_ptr_t void * +-#else +-# define lt_ptr_t char * +-# define const +-#endif +- +-/* The mapping between symbol names and symbols. */ +-const struct { +- const char *name; +- lt_ptr_t address; +-} +-[lt_preloaded_symbols[] =] +-{ +-EOF +- sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" >> conftest.$ac_ext +- cat <<\EOF >> conftest.$ac_ext +- {0, (lt_ptr_t) 0} +-}; +- +-#ifdef __cplusplus +-} +-#endif +-EOF +- # Now try linking the two files. +- mv conftest.$ac_objext conftstm.$ac_objext +- save_LIBS="$LIBS" +- save_CFLAGS="$CFLAGS" +- LIBS="conftstm.$ac_objext" +- CFLAGS="$CFLAGS$no_builtin_flag" +- if AC_TRY_EVAL(ac_link) && test -s conftest; then +- pipe_works=yes +- fi +- LIBS="$save_LIBS" +- CFLAGS="$save_CFLAGS" +- else +- echo "cannot find nm_test_func in $nlist" >&AC_FD_CC +- fi +- else +- echo "cannot find nm_test_var in $nlist" >&AC_FD_CC +- fi +- else +- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AC_FD_CC +- fi +- else +- echo "$progname: failed program was:" >&AC_FD_CC +- cat conftest.$ac_ext >&5 +- fi +- rm -f conftest* conftst* +- +- # Do not use the global_symbol_pipe unless it works. +- if test "$pipe_works" = yes; then +- break +- else +- lt_cv_sys_global_symbol_pipe= +- fi +-done +-]) +-global_symbol_pipe="$lt_cv_sys_global_symbol_pipe" +-if test -z "$lt_cv_sys_global_symbol_pipe"; then +- global_symbol_to_cdecl= +-else +- global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl" +-fi +-if test -z "$global_symbol_pipe$global_symbol_to_cdecl"; then +- AC_MSG_RESULT(failed) +-else +- AC_MSG_RESULT(ok) +-fi +-]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +- +-# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR +-# --------------------------------- +-AC_DEFUN([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR], +-[# Find the correct PATH separator. Usually this is `:', but +-# DJGPP uses `;' like DOS. +-if test "X${PATH_SEPARATOR+set}" != Xset; then +- UNAME=${UNAME-`uname 2>/dev/null`} +- case X$UNAME in +- *-DOS) lt_cv_sys_path_separator=';' ;; +- *) lt_cv_sys_path_separator=':' ;; +- esac +-fi +-])# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR +- +-# _LT_AC_PROG_ECHO_BACKSLASH +-# -------------------------- +-# Add some code to the start of the generated configure script which +-# will find an echo command which doesn;t interpret backslashes. +-AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], +-[ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], +- [AC_DIVERT_PUSH(NOTICE)]) +-_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR +- +-# Check that we are running under the correct shell. +-SHELL=${CONFIG_SHELL-/bin/sh} +- +-case X$ECHO in +-X*--fallback-echo) +- # Remove one level of quotation (which was required for Make). +- ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` +- ;; +-esac +- +-echo=${ECHO-echo} +-if test "X[$]1" = X--no-reexec; then +- # Discard the --no-reexec flag, and continue. +- shift +-elif test "X[$]1" = X--fallback-echo; then +- # Avoid inline document here, it may be left over +- : +-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then +- # Yippee, $echo works! +- : +-else +- # Restart under the correct shell. +- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} +-fi +- +-if test "X[$]1" = X--fallback-echo; then +- # used as fallback echo +- shift +- cat </dev/null && +- echo_test_string="`eval $cmd`" && +- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null +- then +- break +- fi +- done +-fi ++if test -z "$ECHO"; then ++if test "X${echo_test_string+set}" != Xset; then ++# find a string as large as possible, as long as the shell can cope with it ++ for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do ++ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... ++ if (echo_test_string=`eval $cmd`) 2>/dev/null && ++ echo_test_string=`eval $cmd` && ++ (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null ++ then ++ break ++ fi ++ done ++fi + + if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && +@@ -498,8 +383,9 @@ + # + # So, first we look for a working echo in the user's PATH. + +- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do ++ IFS="$lt_save_ifs" + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && +@@ -508,7 +394,7 @@ + break + fi + done +- IFS="$save_ifs" ++ IFS="$lt_save_ifs" + + if test "X$echo" = Xecho; then + # We didn't find a better echo, so look for alternatives. +@@ -581,103 +467,455 @@ + fi + + AC_SUBST(ECHO) +-AC_DIVERT_POP +-])# _LT_AC_PROG_ECHO_BACKSLASH +- +-# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +-# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +-# ------------------------------------------------------------------ +-AC_DEFUN(_LT_AC_TRY_DLOPEN_SELF, +-[if test "$cross_compiling" = yes; then : +- [$4] +-else +- AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl +- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 +- lt_status=$lt_dlunknown +- cat > conftest.$ac_ext < +-#endif +- +-#include +- +-#ifdef RTLD_GLOBAL +-# define LT_DLGLOBAL RTLD_GLOBAL +-#else +-# ifdef DL_GLOBAL +-# define LT_DLGLOBAL DL_GLOBAL +-# else +-# define LT_DLGLOBAL 0 +-# endif +-#endif +- +-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we +- find out it does not work in some platform. */ +-#ifndef LT_DLLAZY_OR_NOW +-# ifdef RTLD_LAZY +-# define LT_DLLAZY_OR_NOW RTLD_LAZY +-# else +-# ifdef DL_LAZY +-# define LT_DLLAZY_OR_NOW DL_LAZY +-# else +-# ifdef RTLD_NOW +-# define LT_DLLAZY_OR_NOW RTLD_NOW +-# else +-# ifdef DL_NOW +-# define LT_DLLAZY_OR_NOW DL_NOW +-# else +-# define LT_DLLAZY_OR_NOW 0 +-# endif +-# endif +-# endif +-# endif +-#endif ++])])# _LT_AC_PROG_ECHO_BACKSLASH + +-#ifdef __cplusplus +-extern "C" void exit (int); +-#endif +- +-void fnord() { int i=42;} +-int main () +-{ +- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +- int status = $lt_dlunknown; + +- if (self) +- { +- if (dlsym (self,"fnord")) status = $lt_dlno_uscore; +- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; +- /* dlclose (self); */ +- } ++# _LT_AC_LOCK ++# ----------- ++AC_DEFUN([_LT_AC_LOCK], ++[AC_ARG_ENABLE([libtool-lock], ++ [AC_HELP_STRING([--disable-libtool-lock], ++ [avoid locking (might break parallel builds)])]) ++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +- exit (status); +-}] +-EOF +- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then +- (./conftest; exit; ) 2>/dev/null +- lt_status=$? +- case x$lt_status in +- x$lt_dlno_uscore) $1 ;; +- x$lt_dlneed_uscore) $2 ;; +- x$lt_unknown|x*) $3 ;; ++# Some flags need to be propagated to the compiler or linker for good ++# libtool support. ++case $host in ++ia64-*-hpux*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if AC_TRY_EVAL(ac_compile); then ++ case `/usr/bin/file conftest.$ac_objext` in ++ *ELF-32*) ++ HPUX_IA64_MODE="32" ++ ;; ++ *ELF-64*) ++ HPUX_IA64_MODE="64" ++ ;; + esac +- else : +- # compilation failed +- $3 + fi +-fi +-rm -fr conftest* +-])# _LT_AC_TRY_DLOPEN_SELF ++ rm -rf conftest* ++ ;; ++*-*-irix6*) ++ # Find out which ABI we are using. ++ echo '[#]line __oline__ "configure"' > conftest.$ac_ext ++ if AC_TRY_EVAL(ac_compile); then ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ case `/usr/bin/file conftest.$ac_objext` in ++ *32-bit*) ++ LD="${LD-ld} -melf32bsmip" ++ ;; ++ *N32*) ++ LD="${LD-ld} -melf32bmipn32" ++ ;; ++ *64-bit*) ++ LD="${LD-ld} -melf64bmip" ++ ;; ++ esac ++ else ++ case `/usr/bin/file conftest.$ac_objext` in ++ *32-bit*) ++ LD="${LD-ld} -32" ++ ;; ++ *N32*) ++ LD="${LD-ld} -n32" ++ ;; ++ *64-bit*) ++ LD="${LD-ld} -64" ++ ;; ++ esac ++ fi ++ fi ++ rm -rf conftest* ++ ;; + +-# AC_LIBTOOL_DLOPEN_SELF +-# ------------------- +-AC_DEFUN(AC_LIBTOOL_DLOPEN_SELF, +-[if test "x$enable_dlopen" != xyes; then +- enable_dlopen=unknown +- enable_dlopen_self=unknown ++x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if AC_TRY_EVAL(ac_compile); then ++ case `/usr/bin/file conftest.o` in ++ *32-bit*) ++ case $host in ++ x86_64-*linux*) ++ LD="${LD-ld} -m elf_i386" ++ ;; ++ ppc64-*linux*|powerpc64-*linux*) ++ LD="${LD-ld} -m elf32ppclinux" ++ ;; ++ s390x-*linux*) ++ LD="${LD-ld} -m elf_s390" ++ ;; ++ sparc64-*linux*) ++ LD="${LD-ld} -m elf32_sparc" ++ ;; ++ esac ++ ;; ++ *64-bit*) ++ case $host in ++ x86_64-*linux*) ++ LD="${LD-ld} -m elf_x86_64" ++ ;; ++ ppc*-*linux*|powerpc*-*linux*) ++ LD="${LD-ld} -m elf64ppc" ++ ;; ++ s390*-*linux*) ++ LD="${LD-ld} -m elf64_s390" ++ ;; ++ sparc*-*linux*) ++ LD="${LD-ld} -m elf64_sparc" ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; ++ ++*-*-sco3.2v5*) ++ # On SCO OpenServer 5, we need -belf to get full-featured binaries. ++ SAVE_CFLAGS="$CFLAGS" ++ CFLAGS="$CFLAGS -belf" ++ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, ++ [AC_LANG_PUSH(C) ++ AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) ++ AC_LANG_POP]) ++ if test x"$lt_cv_cc_needs_belf" != x"yes"; then ++ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf ++ CFLAGS="$SAVE_CFLAGS" ++ fi ++ ;; ++sparc*-*solaris*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if AC_TRY_EVAL(ac_compile); then ++ case `/usr/bin/file conftest.o` in ++ *64-bit*) ++ case $lt_cv_prog_gnu_ld in ++ yes*) LD="${LD-ld} -m elf64_sparc" ;; ++ *) LD="${LD-ld} -64" ;; ++ esac ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; ++ ++AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], ++[*-*-cygwin* | *-*-mingw* | *-*-pw32*) ++ AC_CHECK_TOOL(DLLTOOL, dlltool, false) ++ AC_CHECK_TOOL(AS, as, false) ++ AC_CHECK_TOOL(OBJDUMP, objdump, false) ++ ;; ++ ]) ++esac ++ ++need_locks="$enable_libtool_lock" ++ ++])# _LT_AC_LOCK ++ ++ ++# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, ++# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) ++# ---------------------------------------------------------------- ++# Check whether the given compiler option works ++AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], ++[AC_REQUIRE([LT_AC_PROG_SED]) ++AC_CACHE_CHECK([$1], [$2], ++ [$2=no ++ ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="$3" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&AS_MESSAGE_LOG_FD ++ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ $2=yes ++ fi ++ fi ++ $rm conftest* ++]) ++ ++if test x"[$]$2" = xyes; then ++ ifelse([$5], , :, [$5]) ++else ++ ifelse([$6], , :, [$6]) ++fi ++])# AC_LIBTOOL_COMPILER_OPTION ++ ++ ++# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, ++# [ACTION-SUCCESS], [ACTION-FAILURE]) ++# ------------------------------------------------------------ ++# Check whether the given compiler option works ++AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], ++[AC_CACHE_CHECK([$1], [$2], ++ [$2=no ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS $3" ++ printf "$lt_simple_link_test_code" > conftest.$ac_ext ++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then ++ # The linker can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ if test -s conftest.err; then ++ # Append any errors to the config.log. ++ cat conftest.err 1>&AS_MESSAGE_LOG_FD ++ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if diff conftest.exp conftest.er2 >/dev/null; then ++ $2=yes ++ fi ++ else ++ $2=yes ++ fi ++ fi ++ $rm conftest* ++ LDFLAGS="$save_LDFLAGS" ++]) ++ ++if test x"[$]$2" = xyes; then ++ ifelse([$4], , :, [$4]) ++else ++ ifelse([$5], , :, [$5]) ++fi ++])# AC_LIBTOOL_LINKER_OPTION ++ ++ ++# AC_LIBTOOL_SYS_MAX_CMD_LEN ++# -------------------------- ++AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], ++[# find the maximum length of command line arguments ++AC_MSG_CHECKING([the maximum length of command line arguments]) ++AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl ++ i=0 ++ teststring="ABCD" ++ ++ case $build_os in ++ msdosdjgpp*) ++ # On DJGPP, this test can blow up pretty badly due to problems in libc ++ # (any single argument exceeding 2000 bytes causes a buffer overrun ++ # during glob expansion). Even if it were fixed, the result of this ++ # check would be larger than it should be. ++ lt_cv_sys_max_cmd_len=12288; # 12K is about right ++ ;; ++ ++ gnu*) ++ # Under GNU Hurd, this test is not required because there is ++ # no limit to the length of command line arguments. ++ # Libtool will interpret -1 as no limit whatsoever ++ lt_cv_sys_max_cmd_len=-1; ++ ;; ++ ++ cygwin* | mingw*) ++ # On Win9x/ME, this test blows up -- it succeeds, but takes ++ # about 5 minutes as the teststring grows exponentially. ++ # Worse, since 9x/ME are not pre-emptively multitasking, ++ # you end up with a "frozen" computer, even though with patience ++ # the test eventually succeeds (with a max line length of 256k). ++ # Instead, let's just punt: use the minimum linelength reported by ++ # all of the supported platforms: 8192 (on NT/2K/XP). ++ lt_cv_sys_max_cmd_len=8192; ++ ;; ++ ++ amigaos*) ++ # On AmigaOS with pdksh, this test takes hours, literally. ++ # So we just punt and use a minimum line length of 8192. ++ lt_cv_sys_max_cmd_len=8192; ++ ;; ++ ++ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) ++ # This has been around since 386BSD, at least. Likely further. ++ if test -x /sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` ++ elif test -x /usr/sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` ++ else ++ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs ++ fi ++ # And add a safety zone ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ ;; ++ ++ interix*) ++ # We know the value 262144 and hardcode it with a safety zone (like BSD) ++ lt_cv_sys_max_cmd_len=196608 ++ ;; ++ ++ osf*) ++ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure ++ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not ++ # nice to cause kernel panics so lets avoid the loop below. ++ # First set a reasonable default. ++ lt_cv_sys_max_cmd_len=16384 ++ # ++ if test -x /sbin/sysconfig; then ++ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in ++ *1*) lt_cv_sys_max_cmd_len=-1 ;; ++ esac ++ fi ++ ;; ++ sco3.2v5*) ++ lt_cv_sys_max_cmd_len=102400 ++ ;; ++ sysv5* | sco5v6* | sysv4.2uw2*) ++ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` ++ if test -n "$kargmax"; then ++ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` ++ else ++ lt_cv_sys_max_cmd_len=32768 ++ fi ++ ;; ++ *) ++ # If test is not a shell built-in, we'll probably end up computing a ++ # maximum length that is only half of the actual maximum length, but ++ # we can't tell. ++ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} ++ while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \ ++ = "XX$teststring") >/dev/null 2>&1 && ++ new_result=`expr "X$teststring" : ".*" 2>&1` && ++ lt_cv_sys_max_cmd_len=$new_result && ++ test $i != 17 # 1/2 MB should be enough ++ do ++ i=`expr $i + 1` ++ teststring=$teststring$teststring ++ done ++ teststring= ++ # Add a significant safety factor because C++ compilers can tack on massive ++ # amounts of additional arguments before passing them to the linker. ++ # It appears as though 1/2 is a usable value. ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` ++ ;; ++ esac ++]) ++if test -n $lt_cv_sys_max_cmd_len ; then ++ AC_MSG_RESULT($lt_cv_sys_max_cmd_len) ++else ++ AC_MSG_RESULT(none) ++fi ++])# AC_LIBTOOL_SYS_MAX_CMD_LEN ++ ++ ++# _LT_AC_CHECK_DLFCN ++# ------------------ ++AC_DEFUN([_LT_AC_CHECK_DLFCN], ++[AC_CHECK_HEADERS(dlfcn.h)dnl ++])# _LT_AC_CHECK_DLFCN ++ ++ ++# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, ++# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) ++# --------------------------------------------------------------------- ++AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], ++[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl ++if test "$cross_compiling" = yes; then : ++ [$4] ++else ++ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 ++ lt_status=$lt_dlunknown ++ cat > conftest.$ac_ext < ++#endif ++ ++#include ++ ++#ifdef RTLD_GLOBAL ++# define LT_DLGLOBAL RTLD_GLOBAL ++#else ++# ifdef DL_GLOBAL ++# define LT_DLGLOBAL DL_GLOBAL ++# else ++# define LT_DLGLOBAL 0 ++# endif ++#endif ++ ++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we ++ find out it does not work in some platform. */ ++#ifndef LT_DLLAZY_OR_NOW ++# ifdef RTLD_LAZY ++# define LT_DLLAZY_OR_NOW RTLD_LAZY ++# else ++# ifdef DL_LAZY ++# define LT_DLLAZY_OR_NOW DL_LAZY ++# else ++# ifdef RTLD_NOW ++# define LT_DLLAZY_OR_NOW RTLD_NOW ++# else ++# ifdef DL_NOW ++# define LT_DLLAZY_OR_NOW DL_NOW ++# else ++# define LT_DLLAZY_OR_NOW 0 ++# endif ++# endif ++# endif ++# endif ++#endif ++ ++#ifdef __cplusplus ++extern "C" void exit (int); ++#endif ++ ++void fnord() { int i=42;} ++int main () ++{ ++ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); ++ int status = $lt_dlunknown; ++ ++ if (self) ++ { ++ if (dlsym (self,"fnord")) status = $lt_dlno_uscore; ++ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; ++ /* dlclose (self); */ ++ } ++ else ++ puts (dlerror ()); ++ ++ exit (status); ++}] ++EOF ++ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then ++ (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null ++ lt_status=$? ++ case x$lt_status in ++ x$lt_dlno_uscore) $1 ;; ++ x$lt_dlneed_uscore) $2 ;; ++ x$lt_dlunknown|x*) $3 ;; ++ esac ++ else : ++ # compilation failed ++ $3 ++ fi ++fi ++rm -fr conftest* ++])# _LT_AC_TRY_DLOPEN_SELF ++ ++ ++# AC_LIBTOOL_DLOPEN_SELF ++# ---------------------- ++AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], ++[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl ++if test "x$enable_dlopen" != xyes; then ++ enable_dlopen=unknown ++ enable_dlopen_self=unknown + enable_dlopen_self_static=unknown + else + lt_cv_dlopen=no +@@ -690,22 +928,43 @@ + lt_cv_dlopen_self=yes + ;; + +- cygwin* | mingw* | pw32*) ++ mingw* | pw32*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + ++ cygwin*) ++ lt_cv_dlopen="dlopen" ++ lt_cv_dlopen_libs= ++ ;; ++ ++ darwin*) ++ # if libdl is installed we need to link against it ++ AC_CHECK_LIB([dl], [dlopen], ++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ ++ lt_cv_dlopen="dyld" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes ++ ]) ++ ;; ++ + *) +- AC_CHECK_LIB(dl, dlopen, [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], +- [AC_CHECK_FUNC(dlopen, lt_cv_dlopen="dlopen", +- [AC_CHECK_FUNC(shl_load, lt_cv_dlopen="shl_load", +- [AC_CHECK_LIB(svld, dlopen, +- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], +- [AC_CHECK_LIB(dld, shl_load, +- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) ++ AC_CHECK_FUNC([shl_load], ++ [lt_cv_dlopen="shl_load"], ++ [AC_CHECK_LIB([dld], [shl_load], ++ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], ++ [AC_CHECK_FUNC([dlopen], ++ [lt_cv_dlopen="dlopen"], ++ [AC_CHECK_LIB([dl], [dlopen], ++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], ++ [AC_CHECK_LIB([svld], [dlopen], ++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], ++ [AC_CHECK_LIB([dld], [dld_link], ++ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) ++ ]) + ]) +- ]) +- ]) ++ ]) ++ ]) + ]) + ;; + esac +@@ -719,11 +978,10 @@ + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" +- AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" +- eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" +@@ -736,7 +994,7 @@ + ]) + + if test "x$lt_cv_dlopen_self" = xyes; then +- LDFLAGS="$LDFLAGS $link_static_flag" ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], + lt_cv_dlopen_self_static, [dnl + _LT_AC_TRY_DLOPEN_SELF( +@@ -763,1900 +1021,5241 @@ + fi + ])# AC_LIBTOOL_DLOPEN_SELF + +-AC_DEFUN([_LT_AC_LTCONFIG_HACK], +-[AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])dnl +-# Sed substitution that helps us do robust quoting. It backslashifies +-# metacharacters that are still active within double-quoted strings. +-Xsed='sed -e s/^X//' +-[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] + +-# Same as above, but do not quote variable references. +-[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] ++# AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) ++# --------------------------------- ++# Check to see if options -c and -o are simultaneously supported by compiler ++AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], ++[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl ++AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], ++ [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], ++ [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no ++ $rm -r conftest 2>/dev/null ++ mkdir conftest ++ cd conftest ++ mkdir out ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ lt_compiler_flag="-o out/conftest2.$ac_objext" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) ++ (eval "$lt_compile" 2>out/conftest.err) ++ ac_status=$? ++ cat out/conftest.err >&AS_MESSAGE_LOG_FD ++ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD ++ if (exit $ac_status) && test -s out/conftest2.$ac_objext ++ then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then ++ _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes ++ fi ++ fi ++ chmod u+w . 2>&AS_MESSAGE_LOG_FD ++ $rm conftest* ++ # SGI C++ compiler will create directory out/ii_files/ for ++ # template instantiation ++ test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files ++ $rm out/* && rmdir out ++ cd .. ++ rmdir conftest ++ $rm conftest* ++]) ++])# AC_LIBTOOL_PROG_CC_C_O + +-# Sed substitution to delay expansion of an escaped shell variable in a +-# double_quote_subst'ed string. +-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +-# Constants: +-rm="rm -f" ++# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) ++# ----------------------------------------- ++# Check to see if we can do hard links to lock some files if needed ++AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], ++[AC_REQUIRE([_LT_AC_LOCK])dnl + +-# Global variables: +-default_ofile=libtool +-can_build_shared=yes ++hard_links="nottested" ++if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then ++ # do not overwrite the value of need_locks provided by the user ++ AC_MSG_CHECKING([if we can lock with hard links]) ++ hard_links=yes ++ $rm conftest* ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ touch conftest.a ++ ln conftest.a conftest.b 2>&5 || hard_links=no ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ AC_MSG_RESULT([$hard_links]) ++ if test "$hard_links" = no; then ++ AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) ++ need_locks=warn ++ fi ++else ++ need_locks=no ++fi ++])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS + +-# All known linkers require a `.a' archive for static linking (except M$VC, +-# which needs '.lib'). +-libext=a +-ltmain="$ac_aux_dir/ltmain.sh" +-ofile="$default_ofile" +-with_gnu_ld="$lt_cv_prog_gnu_ld" +-need_locks="$enable_libtool_lock" + +-old_CC="$CC" +-old_CFLAGS="$CFLAGS" ++# AC_LIBTOOL_OBJDIR ++# ----------------- ++AC_DEFUN([AC_LIBTOOL_OBJDIR], ++[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], ++[rm -f .libs 2>/dev/null ++mkdir .libs 2>/dev/null ++if test -d .libs; then ++ lt_cv_objdir=.libs ++else ++ # MS-DOS does not allow filenames that begin with a dot. ++ lt_cv_objdir=_libs ++fi ++rmdir .libs 2>/dev/null]) ++objdir=$lt_cv_objdir ++])# AC_LIBTOOL_OBJDIR + +-# Set sane defaults for various variables +-test -z "$AR" && AR=ar +-test -z "$AR_FLAGS" && AR_FLAGS=cru +-test -z "$AS" && AS=as +-test -z "$CC" && CC=cc +-test -z "$DLLTOOL" && DLLTOOL=dlltool +-test -z "$LD" && LD=ld +-test -z "$LN_S" && LN_S="ln -s" +-test -z "$MAGIC_CMD" && MAGIC_CMD=file +-test -z "$NM" && NM=nm +-test -z "$OBJDUMP" && OBJDUMP=objdump +-test -z "$RANLIB" && RANLIB=: +-test -z "$STRIP" && STRIP=: +-test -z "$ac_objext" && ac_objext=o + +-if test x"$host" != x"$build"; then +- ac_tool_prefix=${host_alias}- ++# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) ++# ---------------------------------------------- ++# Check hardcoding attributes. ++AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], ++[AC_MSG_CHECKING([how to hardcode library paths into programs]) ++_LT_AC_TAGVAR(hardcode_action, $1)= ++if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ ++ test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \ ++ test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then ++ ++ # We can hardcode non-existant directories. ++ if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && ++ # If the only mechanism to avoid hardcoding is shlibpath_var, we ++ # have to relink, otherwise we might link with an installed library ++ # when we should be linking with a yet-to-be-installed one ++ ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && ++ test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then ++ # Linking always hardcodes the temporary library directory. ++ _LT_AC_TAGVAR(hardcode_action, $1)=relink ++ else ++ # We can link without hardcoding, and we can hardcode nonexisting dirs. ++ _LT_AC_TAGVAR(hardcode_action, $1)=immediate ++ fi + else +- ac_tool_prefix= ++ # We cannot hardcode anything, or else we can only hardcode existing ++ # directories. ++ _LT_AC_TAGVAR(hardcode_action, $1)=unsupported + fi ++AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) + +-# Transform linux* to *-*-linux-gnu*, to support old configure scripts. +-case $host_os in +-linux-gnu*) ;; +-linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` +-esac +- +-case $host_os in +-aix3*) +- # AIX sometimes has problems with the GCC collect2 program. For some +- # reason, if we set the COLLECT_NAMES environment variable, the problems +- # vanish in a puff of smoke. +- if test "X${COLLECT_NAMES+set}" != Xset; then +- COLLECT_NAMES= +- export COLLECT_NAMES +- fi +- ;; +-esac ++if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then ++ # Fast installation is not supported ++ enable_fast_install=no ++elif test "$shlibpath_overrides_runpath" = yes || ++ test "$enable_shared" = no; then ++ # Fast installation is not necessary ++ enable_fast_install=needless ++fi ++])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH + +-# Determine commands to create old-style static archives. +-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' +-old_postinstall_cmds='chmod 644 $oldlib' +-old_postuninstall_cmds= + +-if test -n "$RANLIB"; then +- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +- old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" ++# AC_LIBTOOL_SYS_LIB_STRIP ++# ------------------------ ++AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], ++[striplib= ++old_striplib= ++AC_MSG_CHECKING([whether stripping libraries is possible]) ++if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then ++ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" ++ test -z "$striplib" && striplib="$STRIP --strip-unneeded" ++ AC_MSG_RESULT([yes]) ++else ++# FIXME - insert some real tests, host_os isn't really good enough ++ case $host_os in ++ darwin*) ++ if test -n "$STRIP" ; then ++ striplib="$STRIP -x" ++ AC_MSG_RESULT([yes]) ++ else ++ AC_MSG_RESULT([no]) ++fi ++ ;; ++ *) ++ AC_MSG_RESULT([no]) ++ ;; ++ esac + fi ++])# AC_LIBTOOL_SYS_LIB_STRIP + +-# Allow CC to be a program name with arguments. +-set dummy $CC +-compiler="[$]2" + +-AC_MSG_CHECKING([for objdir]) +-rm -f .libs 2>/dev/null +-mkdir .libs 2>/dev/null +-if test -d .libs; then +- objdir=.libs ++# AC_LIBTOOL_SYS_DYNAMIC_LINKER ++# ----------------------------- ++# PORTME Fill in your ld.so characteristics ++AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], ++[AC_MSG_CHECKING([dynamic linker characteristics]) ++library_names_spec= ++libname_spec='lib$name' ++soname_spec= ++shrext_cmds=".so" ++postinstall_cmds= ++postuninstall_cmds= ++finish_cmds= ++finish_eval= ++shlibpath_var= ++shlibpath_overrides_runpath=unknown ++version_type=none ++dynamic_linker="$host_os ld.so" ++sys_lib_dlsearch_path_spec="/lib /usr/lib" ++if test "$GCC" = yes; then ++ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then ++ # if the path contains ";" then we assume it to be the separator ++ # otherwise default to the standard path separator (i.e. ":") - it is ++ # assumed that no part of a normal pathname contains ";" but that should ++ # okay in the real world where ";" in dirpaths is itself problematic. ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi + else +- # MS-DOS does not allow filenames that begin with a dot. +- objdir=_libs ++ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + fi +-rmdir .libs 2>/dev/null +-AC_MSG_RESULT($objdir) +- ++need_lib_prefix=unknown ++hardcode_into_libs=no + +-AC_ARG_WITH(pic, +-[ --with-pic try to use only PIC/non-PIC objects [default=use both]], +-pic_mode="$withval", pic_mode=default) +-test -z "$pic_mode" && pic_mode=default ++# when you set need_version to no, make sure it does not cause -set_version ++# flags to be left without arguments ++need_version=unknown + +-# We assume here that the value for lt_cv_prog_cc_pic will not be cached +-# in isolation, and that seeing it set (from the cache) indicates that +-# the associated values are set (in the cache) correctly too. +-AC_MSG_CHECKING([for $compiler option to produce PIC]) +-AC_CACHE_VAL(lt_cv_prog_cc_pic, +-[ lt_cv_prog_cc_pic= +- lt_cv_prog_cc_shlib= +- lt_cv_prog_cc_wl= +- lt_cv_prog_cc_static= +- lt_cv_prog_cc_no_builtin= +- lt_cv_prog_cc_can_build_shared=$can_build_shared ++case $host_os in ++aix3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' ++ shlibpath_var=LIBPATH + +- if test "$GCC" = yes; then +- lt_cv_prog_cc_wl='-Wl,' +- lt_cv_prog_cc_static='-static' ++ # AIX 3 has no versioning support, so we append a major version to the name. ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; + +- case $host_os in +- aix*) +- # Below there is a dirty hack to force normal static linking with -ldl +- # The problem is because libdl dynamically linked with both libc and +- # libC (AIX C++ library), which obviously doesn't included in libraries +- # list by gcc. This cause undefined symbols with -static flags. +- # This hack allows C programs to be linked with "-static -ldl", but +- # we not sure about C++ programs. +- lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC" +- ;; +- amigaos*) +- # FIXME: we need at least 68020 code to build shared libraries, but +- # adding the `-m68020' flag to GCC prevents building anything better, +- # like `-m68040'. +- lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4' +- ;; +- beos* | irix5* | irix6* | osf3* | osf4* | osf5*) +- # PIC is the default for these OSes. +- ;; +- darwin* | rhapsody*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- lt_cv_prog_cc_pic='-fno-common' +- ;; +- cygwin* | mingw* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- lt_cv_prog_cc_pic='-DDLL_EXPORT' +- ;; +- sysv4*MP*) +- if test -d /usr/nec; then +- lt_cv_prog_cc_pic=-Kconform_pic +- fi +- ;; +- *) +- lt_cv_prog_cc_pic='-fPIC' +- ;; +- esac ++aix4* | aix5*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ hardcode_into_libs=yes ++ if test "$host_cpu" = ia64; then ++ # AIX 5 supports IA64 ++ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH + else +- # PORTME Check for PIC flags for the system compiler. ++ # With GCC up to 2.95.x, collect2 would create an import file ++ # for dependence libraries. The import file would start with ++ # the line `#! .'. This would cause the generated library to ++ # depend on `.', always an invalid library. This was fixed in ++ # development snapshots of GCC prior to 3.0. + case $host_os in +- aix3* | aix4* | aix5*) +- # All AIX code is PIC. +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- lt_cv_prog_cc_static='-Bstatic' +- lt_cv_prog_cc_wl='-Wl,' ++ aix4 | aix4.[[01]] | aix4.[[01]].*) ++ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' ++ echo ' yes ' ++ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then ++ : + else +- lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp' ++ can_build_shared=no + fi + ;; ++ esac ++ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct ++ # soname into executable. Probably we can add versioning support to ++ # collect2, so additional links can be useful in future. ++ if test "$aix_use_runtimelinking" = yes; then ++ # If using run time linking (on AIX 4.2 or later) use lib.so ++ # instead of lib.a to let people know that these are not ++ # typical AIX shared libraries. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ else ++ # We preserve .a as extension for shared libraries through AIX4.2 ++ # and later when we are not doing run time linking. ++ library_names_spec='${libname}${release}.a $libname.a' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ fi ++ shlibpath_var=LIBPATH ++ fi ++ ;; + +- hpux9* | hpux10* | hpux11*) +- # Is there a better lt_cv_prog_cc_static that works with the bundled CC? +- lt_cv_prog_cc_wl='-Wl,' +- lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive" +- lt_cv_prog_cc_pic='+Z' +- ;; +- +- irix5* | irix6*) +- lt_cv_prog_cc_wl='-Wl,' +- lt_cv_prog_cc_static='-non_shared' +- # PIC (with -KPIC) is the default. +- ;; +- +- cygwin* | mingw* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- lt_cv_prog_cc_pic='-DDLL_EXPORT' +- ;; ++amigaos*) ++ library_names_spec='$libname.ixlibrary $libname.a' ++ # Create ${libname}_ixlibrary.a entries in /sys/libs. ++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ++ ;; + +- newsos6) +- lt_cv_prog_cc_pic='-KPIC' +- lt_cv_prog_cc_static='-Bstatic' +- ;; ++beos*) ++ library_names_spec='${libname}${shared_ext}' ++ dynamic_linker="$host_os ld.so" ++ shlibpath_var=LIBRARY_PATH ++ ;; + +- osf3* | osf4* | osf5*) +- # All OSF/1 code is PIC. +- lt_cv_prog_cc_wl='-Wl,' +- lt_cv_prog_cc_static='-non_shared' +- ;; ++bsdi[[45]]*) ++ version_type=linux ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" ++ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" ++ # the default ld.so.conf also contains /usr/contrib/lib and ++ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow ++ # libtool to hard-code these into programs ++ ;; + +- sco3.2v5*) +- lt_cv_prog_cc_pic='-Kpic' +- lt_cv_prog_cc_static='-dn' +- lt_cv_prog_cc_shlib='-belf' +- ;; ++cygwin* | mingw* | pw32*) ++ version_type=windows ++ shrext_cmds=".dll" ++ need_version=no ++ need_lib_prefix=no + +- solaris*) +- lt_cv_prog_cc_pic='-KPIC' +- lt_cv_prog_cc_static='-Bstatic' +- lt_cv_prog_cc_wl='-Wl,' +- ;; ++ case $GCC,$host_os in ++ yes,cygwin* | yes,mingw* | yes,pw32*) ++ library_names_spec='$libname.dll.a' ++ # DLL is installed to $(libdir)/../bin by postinstall_cmds ++ postinstall_cmds='base_file=`basename \${file}`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ ++ dldir=$destdir/`dirname \$dlpath`~ ++ test -d \$dldir || mkdir -p \$dldir~ ++ $install_prog $dir/$dlname \$dldir/$dlname~ ++ chmod a+x \$dldir/$dlname' ++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ ++ dlpath=$dir/\$dldll~ ++ $rm \$dlpath' ++ shlibpath_overrides_runpath=yes + +- sunos4*) +- lt_cv_prog_cc_pic='-PIC' +- lt_cv_prog_cc_static='-Bstatic' +- lt_cv_prog_cc_wl='-Qoption ld ' ++ case $host_os in ++ cygwin*) ++ # Cygwin DLLs use 'cyg' prefix rather than 'lib' ++ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; +- +- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) +- lt_cv_prog_cc_pic='-KPIC' +- lt_cv_prog_cc_static='-Bstatic' +- if test "x$host_vendor" = xsni; then +- lt_cv_prog_cc_wl='-LD' ++ mingw*) ++ # MinGW DLLs use traditional 'lib' prefix ++ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then ++ # It is most probably a Windows format PATH printed by ++ # mingw gcc, but we are running on Cygwin. Gcc prints its search ++ # path with ; separators, and with drive letters. We can handle the ++ # drive letters (cygwin fileutils understands them), so leave them, ++ # especially as we might pass files found there to a mingw objdump, ++ # which wouldn't understand a cygwinified path. Ahh. ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else +- lt_cv_prog_cc_wl='-Wl,' ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; +- +- uts4*) +- lt_cv_prog_cc_pic='-pic' +- lt_cv_prog_cc_static='-Bstatic' ++ pw32*) ++ # pw32 DLLs use 'pw' prefix rather than 'lib' ++ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + ;; ++ esac ++ ;; + +- sysv4*MP*) +- if test -d /usr/nec ;then +- lt_cv_prog_cc_pic='-Kconform_pic' +- lt_cv_prog_cc_static='-Bstatic' +- fi +- ;; ++ *) ++ library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' ++ ;; ++ esac ++ dynamic_linker='Win32 ld.exe' ++ # FIXME: first we should search . and the directory the executable is in ++ shlibpath_var=PATH ++ ;; + +- *) +- lt_cv_prog_cc_can_build_shared=no +- ;; +- esac ++darwin* | rhapsody*) ++ dynamic_linker="$host_os dyld" ++ version_type=darwin ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' ++ soname_spec='${libname}${release}${major}$shared_ext' ++ shlibpath_overrides_runpath=yes ++ shlibpath_var=DYLD_LIBRARY_PATH ++ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' ++ # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. ++ if test "$GCC" = yes; then ++ sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` ++ else ++ sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' + fi +-]) +-if test -z "$lt_cv_prog_cc_pic"; then +- AC_MSG_RESULT([none]) +-else +- AC_MSG_RESULT([$lt_cv_prog_cc_pic]) ++ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ++ ;; + +- # Check to make sure the pic_flag actually works. +- AC_MSG_CHECKING([if $compiler PIC flag $lt_cv_prog_cc_pic works]) +- AC_CACHE_VAL(lt_cv_prog_cc_pic_works, [dnl +- save_CFLAGS="$CFLAGS" +- CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC" +- AC_TRY_COMPILE([], [], [dnl +- case $host_os in +- hpux9* | hpux10* | hpux11*) +- # On HP-UX, both CC and GCC only warn that PIC is supported... then +- # they create non-PIC objects. So, if there were any warnings, we +- # assume that PIC is not supported. +- if test -s conftest.err; then +- lt_cv_prog_cc_pic_works=no +- else +- lt_cv_prog_cc_pic_works=yes +- fi +- ;; +- *) +- lt_cv_prog_cc_pic_works=yes +- ;; +- esac +- ], [dnl +- lt_cv_prog_cc_pic_works=no +- ]) +- CFLAGS="$save_CFLAGS" +- ]) ++dgux*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; + +- if test "X$lt_cv_prog_cc_pic_works" = Xno; then +- lt_cv_prog_cc_pic= +- lt_cv_prog_cc_can_build_shared=no +- else +- lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic" +- fi +- +- AC_MSG_RESULT([$lt_cv_prog_cc_pic_works]) +-fi +- +-# Check for any special shared library compilation flags. +-if test -n "$lt_cv_prog_cc_shlib"; then +- AC_MSG_WARN([\`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries]) +- if echo "$old_CC $old_CFLAGS " | [egrep -e "[ ]$lt_cv_prog_cc_shlib[ ]"] >/dev/null; then : +- else +- AC_MSG_WARN([add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure]) +- lt_cv_prog_cc_can_build_shared=no +- fi +-fi +- +-AC_MSG_CHECKING([if $compiler static flag $lt_cv_prog_cc_static works]) +-AC_CACHE_VAL([lt_cv_prog_cc_static_works], [dnl +- lt_cv_prog_cc_static_works=no +- save_LDFLAGS="$LDFLAGS" +- LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static" +- AC_TRY_LINK([], [], [lt_cv_prog_cc_static_works=yes]) +- LDFLAGS="$save_LDFLAGS" +-]) +- +-# Belt *and* braces to stop my trousers falling down: +-test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static= +-AC_MSG_RESULT([$lt_cv_prog_cc_static_works]) +- +-pic_flag="$lt_cv_prog_cc_pic" +-special_shlib_compile_flags="$lt_cv_prog_cc_shlib" +-wl="$lt_cv_prog_cc_wl" +-link_static_flag="$lt_cv_prog_cc_static" +-no_builtin_flag="$lt_cv_prog_cc_no_builtin" +-can_build_shared="$lt_cv_prog_cc_can_build_shared" +- +- +-# Check to see if options -o and -c are simultaneously supported by compiler +-AC_MSG_CHECKING([if $compiler supports -c -o file.$ac_objext]) +-AC_CACHE_VAL([lt_cv_compiler_c_o], [ +-$rm -r conftest 2>/dev/null +-mkdir conftest +-cd conftest +-echo "int some_variable = 0;" > conftest.$ac_ext +-mkdir out +-# According to Tom Tromey, Ian Lance Taylor reported there are C compilers +-# that will create temporary files in the current directory regardless of +-# the output directory. Thus, making CWD read-only will cause this test +-# to fail, enabling locking or at least warning the user not to do parallel +-# builds. +-chmod -w . +-save_CFLAGS="$CFLAGS" +-CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" +-compiler_c_o=no +-if { (eval echo configure:__oline__: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test -s out/conftest.err; then +- lt_cv_compiler_c_o=no +- else +- lt_cv_compiler_c_o=yes +- fi +-else +- # Append any errors to the config.log. +- cat out/conftest.err 1>&AC_FD_CC +- lt_cv_compiler_c_o=no +-fi +-CFLAGS="$save_CFLAGS" +-chmod u+w . +-$rm conftest* out/* +-rmdir out +-cd .. +-rmdir conftest +-$rm -r conftest 2>/dev/null +-]) +-compiler_c_o=$lt_cv_compiler_c_o +-AC_MSG_RESULT([$compiler_c_o]) +- +-if test x"$compiler_c_o" = x"yes"; then +- # Check to see if we can write to a .lo +- AC_MSG_CHECKING([if $compiler supports -c -o file.lo]) +- AC_CACHE_VAL([lt_cv_compiler_o_lo], [ +- lt_cv_compiler_o_lo=no +- save_CFLAGS="$CFLAGS" +- CFLAGS="$CFLAGS -c -o conftest.lo" +- AC_TRY_COMPILE([], [int some_variable = 0;], [dnl +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test -s conftest.err; then +- lt_cv_compiler_o_lo=no +- else +- lt_cv_compiler_o_lo=yes +- fi +- ]) +- CFLAGS="$save_CFLAGS" +- ]) +- compiler_o_lo=$lt_cv_compiler_o_lo +- AC_MSG_RESULT([$compiler_o_lo]) +-else +- compiler_o_lo=no +-fi ++freebsd1*) ++ dynamic_linker=no ++ ;; + +-# Check to see if we can do hard links to lock some files if needed +-hard_links="nottested" +-if test "$compiler_c_o" = no && test "$need_locks" != no; then +- # do not overwrite the value of need_locks provided by the user +- AC_MSG_CHECKING([if we can lock with hard links]) +- hard_links=yes +- $rm conftest* +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- touch conftest.a +- ln conftest.a conftest.b 2>&5 || hard_links=no +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- AC_MSG_RESULT([$hard_links]) +- if test "$hard_links" = no; then +- AC_MSG_WARN([\`$CC' does not support \`-c -o', so \`make -j' may be unsafe]) +- need_locks=warn ++freebsd* | dragonfly*) ++ # DragonFly does not have aout. When/if they implement a new ++ # versioning mechanism, adjust this. ++ if test -x /usr/bin/objformat; then ++ objformat=`/usr/bin/objformat` ++ else ++ case $host_os in ++ freebsd[[123]]*) objformat=aout ;; ++ *) objformat=elf ;; ++ esac + fi +-else +- need_locks=no +-fi +- +-if test "$GCC" = yes; then +- # Check to see if options -fno-rtti -fno-exceptions are supported by compiler +- AC_MSG_CHECKING([if $compiler supports -fno-rtti -fno-exceptions]) +- echo "int some_variable = 0;" > conftest.$ac_ext +- save_CFLAGS="$CFLAGS" +- CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext" +- compiler_rtti_exceptions=no +- AC_TRY_COMPILE([], [int some_variable = 0;], [dnl +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test -s conftest.err; then +- compiler_rtti_exceptions=no +- else +- compiler_rtti_exceptions=yes ++ version_type=freebsd-$objformat ++ case $version_type in ++ freebsd-elf*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ need_version=no ++ need_lib_prefix=no ++ ;; ++ freebsd-*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' ++ need_version=yes ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_os in ++ freebsd2*) ++ shlibpath_overrides_runpath=yes ++ ;; ++ freebsd3.[[01]]* | freebsdelf3.[[01]]*) ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ ++ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ freebsd*) # from 4.6 on ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ esac ++ ;; ++ ++gnu*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ ;; ++ ++hpux9* | hpux10* | hpux11*) ++ # Give a soname corresponding to the major version so that dld.sl refuses to ++ # link against other versions. ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ case $host_cpu in ++ ia64*) ++ shrext_cmds='.so' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.so" ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ if test "X$HPUX_IA64_MODE" = X32; then ++ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" ++ else ++ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" ++ fi ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ hppa*64*) ++ shrext_cmds='.sl' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ *) ++ shrext_cmds='.sl' ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=SHLIB_PATH ++ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; ++ esac ++ # HP-UX runs *really* slowly unless shared libraries are mode 555. ++ postinstall_cmds='chmod 555 $lib' ++ ;; ++ ++interix3*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ ++irix5* | irix6* | nonstopux*) ++ case $host_os in ++ nonstopux*) version_type=nonstopux ;; ++ *) ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ version_type=linux ++ else ++ version_type=irix ++ fi ;; ++ esac ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' ++ case $host_os in ++ irix5* | nonstopux*) ++ libsuff= shlibsuff= ++ ;; ++ *) ++ case $LD in # libtool.m4 will add one of these switches to LD ++ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") ++ libsuff= shlibsuff= libmagic=32-bit;; ++ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") ++ libsuff=32 shlibsuff=N32 libmagic=N32;; ++ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") ++ libsuff=64 shlibsuff=64 libmagic=64-bit;; ++ *) libsuff= shlibsuff= libmagic=never-match;; ++ esac ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" ++ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" ++ hardcode_into_libs=yes ++ ;; ++ ++# No shared lib support for Linux oldld, aout, or coff. ++linux*oldld* | linux*aout* | linux*coff*) ++ dynamic_linker=no ++ ;; ++ ++# This must be Linux ELF. ++linux* | k*bsd*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ # This implies no fast_install, which is unacceptable. ++ # Some rework will be needed to allow for fast_install ++ # before this can be enabled. ++ hardcode_into_libs=yes ++ ++ # Append ld.so.conf contents to the search path ++ if test -f /etc/ld.so.conf; then ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" ++ fi ++ ++ # We used to test for /lib/ld.so.1 and disable shared libraries on ++ # powerpc, because MkLinux only supported shared libraries with the ++ # GNU dynamic linker. Since this was broken with cross compilers, ++ # most powerpc-linux boxes support dynamic linking these days and ++ # people can always --disable-shared, the test was removed, and we ++ # assume the GNU/Linux dynamic linker is in use. ++ dynamic_linker='GNU/Linux ld.so' ++ ;; ++ ++netbsdelf*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='NetBSD ld.elf_so' ++ ;; ++ ++netbsd*) ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ dynamic_linker='NetBSD (a.out) ld.so' ++ else ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='NetBSD ld.elf_so' ++ fi ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ ++newsos6) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ ;; ++ ++nto-qnx*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ ;; ++ ++openbsd*) ++ version_type=sunos ++ sys_lib_dlsearch_path_spec="/usr/lib" ++ need_lib_prefix=no ++ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. ++ case $host_os in ++ openbsd3.3 | openbsd3.3.*) need_version=yes ;; ++ *) need_version=no ;; ++ esac ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ case $host_os in ++ openbsd2.[[89]] | openbsd2.[[89]].*) ++ shlibpath_overrides_runpath=no ++ ;; ++ *) ++ shlibpath_overrides_runpath=yes ++ ;; ++ esac ++ else ++ shlibpath_overrides_runpath=yes ++ fi ++ ;; ++ ++os2*) ++ libname_spec='$name' ++ shrext_cmds=".dll" ++ need_lib_prefix=no ++ library_names_spec='$libname${shared_ext} $libname.a' ++ dynamic_linker='OS/2 ld.exe' ++ shlibpath_var=LIBPATH ++ ;; ++ ++osf3* | osf4* | osf5*) ++ version_type=osf ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" ++ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ++ ;; ++ ++solaris*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ # ldd complains unless libraries are executable ++ postinstall_cmds='chmod +x $lib' ++ ;; ++ ++sunos4*) ++ version_type=sunos ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ if test "$with_gnu_ld" = yes; then ++ need_lib_prefix=no ++ fi ++ need_version=yes ++ ;; ++ ++sysv4 | sysv4.3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_vendor in ++ sni) ++ shlibpath_overrides_runpath=no ++ need_lib_prefix=no ++ export_dynamic_flag_spec='${wl}-Blargedynsym' ++ runpath_var=LD_RUN_PATH ++ ;; ++ siemens) ++ need_lib_prefix=no ++ ;; ++ motorola) ++ need_lib_prefix=no ++ need_version=no ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ++ ;; ++ esac ++ ;; ++ ++sysv4*MP*) ++ if test -d /usr/nec ;then ++ version_type=linux ++ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' ++ soname_spec='$libname${shared_ext}.$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ fi ++ ;; ++ ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ version_type=freebsd-elf ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ if test "$with_gnu_ld" = yes; then ++ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' ++ shlibpath_overrides_runpath=no ++ else ++ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' ++ shlibpath_overrides_runpath=yes ++ case $host_os in ++ sco3.2v5*) ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ++ ;; ++ esac ++ fi ++ sys_lib_dlsearch_path_spec='/usr/lib' ++ ;; ++ ++uts4*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; ++ ++*) ++ dynamic_linker=no ++ ;; ++esac ++AC_MSG_RESULT([$dynamic_linker]) ++test "$dynamic_linker" = no && can_build_shared=no ++ ++variables_saved_for_relink="PATH $shlibpath_var $runpath_var" ++if test "$GCC" = yes; then ++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" ++fi ++])# AC_LIBTOOL_SYS_DYNAMIC_LINKER ++ ++ ++# _LT_AC_TAGCONFIG ++# ---------------- ++AC_DEFUN([_LT_AC_TAGCONFIG], ++[AC_ARG_WITH([tags], ++ [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@], ++ [include additional configurations @<:@automatic@:>@])], ++ [tagnames="$withval"]) ++ ++if test -f "$ltmain" && test -n "$tagnames"; then ++ if test ! -f "${ofile}"; then ++ AC_MSG_WARN([output file `$ofile' does not exist]) ++ fi ++ ++ if test -z "$LTCC"; then ++ eval "`$SHELL ${ofile} --config | grep '^LTCC='`" ++ if test -z "$LTCC"; then ++ AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) ++ else ++ AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) ++ fi ++ fi ++ if test -z "$LTCFLAGS"; then ++ eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`" ++ fi ++ ++ # Extract list of available tagged configurations in $ofile. ++ # Note that this assumes the entire list is on one line. ++ available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` ++ ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for tagname in $tagnames; do ++ IFS="$lt_save_ifs" ++ # Check whether tagname contains only valid characters ++ case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in ++ "") ;; ++ *) AC_MSG_ERROR([invalid tag name: $tagname]) ++ ;; ++ esac ++ ++ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null ++ then ++ AC_MSG_ERROR([tag name \"$tagname\" already exists]) ++ fi ++ ++ # Update the list of available tags. ++ if test -n "$tagname"; then ++ echo appending configuration tag \"$tagname\" to $ofile ++ ++ case $tagname in ++ CXX) ++ if test -n "$CXX" && ( test "X$CXX" != "Xno" && ++ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || ++ (test "X$CXX" != "Xg++"))) ; then ++ AC_LIBTOOL_LANG_CXX_CONFIG ++ else ++ tagname="" ++ fi ++ ;; ++ ++ F77) ++ if test -n "$F77" && test "X$F77" != "Xno"; then ++ AC_LIBTOOL_LANG_F77_CONFIG ++ else ++ tagname="" ++ fi ++ ;; ++ ++ GCJ) ++ if test -n "$GCJ" && test "X$GCJ" != "Xno"; then ++ AC_LIBTOOL_LANG_GCJ_CONFIG ++ else ++ tagname="" ++ fi ++ ;; ++ ++ RC) ++ AC_LIBTOOL_LANG_RC_CONFIG ++ ;; ++ ++ *) ++ AC_MSG_ERROR([Unsupported tag name: $tagname]) ++ ;; ++ esac ++ ++ # Append the new tag name to the list of available tags. ++ if test -n "$tagname" ; then ++ available_tags="$available_tags $tagname" ++ fi ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ++ # Now substitute the updated list of available tags. ++ if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then ++ mv "${ofile}T" "$ofile" ++ chmod +x "$ofile" ++ else ++ rm -f "${ofile}T" ++ AC_MSG_ERROR([unable to update list of available tagged configurations.]) ++ fi ++fi ++])# _LT_AC_TAGCONFIG ++ ++ ++# AC_LIBTOOL_DLOPEN ++# ----------------- ++# enable checks for dlopen support ++AC_DEFUN([AC_LIBTOOL_DLOPEN], ++ [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) ++])# AC_LIBTOOL_DLOPEN ++ ++ ++# AC_LIBTOOL_WIN32_DLL ++# -------------------- ++# declare package support for building win32 DLLs ++AC_DEFUN([AC_LIBTOOL_WIN32_DLL], ++[AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) ++])# AC_LIBTOOL_WIN32_DLL ++ ++ ++# AC_ENABLE_SHARED([DEFAULT]) ++# --------------------------- ++# implement the --enable-shared flag ++# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. ++AC_DEFUN([AC_ENABLE_SHARED], ++[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl ++AC_ARG_ENABLE([shared], ++ [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], ++ [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], ++ [p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_shared=yes ;; ++ no) enable_shared=no ;; ++ *) ++ enable_shared=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_shared=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac], ++ [enable_shared=]AC_ENABLE_SHARED_DEFAULT) ++])# AC_ENABLE_SHARED ++ ++ ++# AC_DISABLE_SHARED ++# ----------------- ++# set the default shared flag to --disable-shared ++AC_DEFUN([AC_DISABLE_SHARED], ++[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl ++AC_ENABLE_SHARED(no) ++])# AC_DISABLE_SHARED ++ ++ ++# AC_ENABLE_STATIC([DEFAULT]) ++# --------------------------- ++# implement the --enable-static flag ++# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. ++AC_DEFUN([AC_ENABLE_STATIC], ++[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl ++AC_ARG_ENABLE([static], ++ [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], ++ [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], ++ [p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_static=yes ;; ++ no) enable_static=no ;; ++ *) ++ enable_static=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_static=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac], ++ [enable_static=]AC_ENABLE_STATIC_DEFAULT) ++])# AC_ENABLE_STATIC ++ ++ ++# AC_DISABLE_STATIC ++# ----------------- ++# set the default static flag to --disable-static ++AC_DEFUN([AC_DISABLE_STATIC], ++[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl ++AC_ENABLE_STATIC(no) ++])# AC_DISABLE_STATIC ++ ++ ++# AC_ENABLE_FAST_INSTALL([DEFAULT]) ++# --------------------------------- ++# implement the --enable-fast-install flag ++# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. ++AC_DEFUN([AC_ENABLE_FAST_INSTALL], ++[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl ++AC_ARG_ENABLE([fast-install], ++ [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], ++ [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], ++ [p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_fast_install=yes ;; ++ no) enable_fast_install=no ;; ++ *) ++ enable_fast_install=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_fast_install=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac], ++ [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) ++])# AC_ENABLE_FAST_INSTALL ++ ++ ++# AC_DISABLE_FAST_INSTALL ++# ----------------------- ++# set the default to --disable-fast-install ++AC_DEFUN([AC_DISABLE_FAST_INSTALL], ++[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl ++AC_ENABLE_FAST_INSTALL(no) ++])# AC_DISABLE_FAST_INSTALL ++ ++ ++# AC_LIBTOOL_PICMODE([MODE]) ++# -------------------------- ++# implement the --with-pic flag ++# MODE is either `yes' or `no'. If omitted, it defaults to `both'. ++AC_DEFUN([AC_LIBTOOL_PICMODE], ++[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl ++pic_mode=ifelse($#,1,$1,default) ++])# AC_LIBTOOL_PICMODE ++ ++ ++# AC_PROG_EGREP ++# ------------- ++# This is predefined starting with Autoconf 2.54, so this conditional ++# definition can be removed once we require Autoconf 2.54 or later. ++m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP], ++[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep], ++ [if echo a | (grep -E '(a|b)') >/dev/null 2>&1 ++ then ac_cv_prog_egrep='grep -E' ++ else ac_cv_prog_egrep='egrep' ++ fi]) ++ EGREP=$ac_cv_prog_egrep ++ AC_SUBST([EGREP]) ++])]) ++ ++ ++# AC_PATH_TOOL_PREFIX ++# ------------------- ++# find a file program which can recognise shared library ++AC_DEFUN([AC_PATH_TOOL_PREFIX], ++[AC_REQUIRE([AC_PROG_EGREP])dnl ++AC_MSG_CHECKING([for $1]) ++AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, ++[case $MAGIC_CMD in ++[[\\/*] | ?:[\\/]*]) ++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ++ ;; ++*) ++ lt_save_MAGIC_CMD="$MAGIC_CMD" ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++dnl $ac_dummy forces splitting on constant user-supplied paths. ++dnl POSIX.2 word splitting is done only on the output of word expansions, ++dnl not every word. This closes a longstanding sh security hole. ++ ac_dummy="ifelse([$2], , $PATH, [$2])" ++ for ac_dir in $ac_dummy; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$1; then ++ lt_cv_path_MAGIC_CMD="$ac_dir/$1" ++ if test -n "$file_magic_test_file"; then ++ case $deplibs_check_method in ++ "file_magic "*) ++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` ++ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | ++ $EGREP "$file_magic_regex" > /dev/null; then ++ : ++ else ++ cat <&2 ++ ++*** Warning: the command libtool uses to detect shared libraries, ++*** $file_magic_cmd, produces output that libtool cannot recognize. ++*** The result is that libtool may fail to recognize shared libraries ++*** as such. This will affect the creation of libtool libraries that ++*** depend on shared libraries, but programs linked with such libtool ++*** libraries will work regardless of this problem. Nevertheless, you ++*** may want to report the problem to your system manager and/or to ++*** bug-libtool@gnu.org ++ ++EOF ++ fi ;; ++ esac ++ fi ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" ++ MAGIC_CMD="$lt_save_MAGIC_CMD" ++ ;; ++esac]) ++MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++if test -n "$MAGIC_CMD"; then ++ AC_MSG_RESULT($MAGIC_CMD) ++else ++ AC_MSG_RESULT(no) ++fi ++])# AC_PATH_TOOL_PREFIX ++ ++ ++# AC_PATH_MAGIC ++# ------------- ++# find a file program which can recognise a shared library ++AC_DEFUN([AC_PATH_MAGIC], ++[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) ++if test -z "$lt_cv_path_MAGIC_CMD"; then ++ if test -n "$ac_tool_prefix"; then ++ AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) ++ else ++ MAGIC_CMD=: ++ fi ++fi ++])# AC_PATH_MAGIC ++ ++ ++# AC_PROG_LD ++# ---------- ++# find the pathname to the GNU or non-GNU linker ++AC_DEFUN([AC_PROG_LD], ++[AC_ARG_WITH([gnu-ld], ++ [AC_HELP_STRING([--with-gnu-ld], ++ [assume the C compiler uses GNU ld @<:@default=no@:>@])], ++ [test "$withval" = no || with_gnu_ld=yes], ++ [with_gnu_ld=no]) ++AC_REQUIRE([LT_AC_PROG_SED])dnl ++AC_REQUIRE([AC_PROG_CC])dnl ++AC_REQUIRE([AC_CANONICAL_HOST])dnl ++AC_REQUIRE([AC_CANONICAL_BUILD])dnl ++ac_prog=ld ++if test "$GCC" = yes; then ++ # Check if gcc -print-prog-name=ld gives a path. ++ AC_MSG_CHECKING([for ld used by $CC]) ++ case $host in ++ *-*-mingw*) ++ # gcc leaves a trailing carriage return which upsets mingw ++ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; ++ *) ++ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; ++ esac ++ case $ac_prog in ++ # Accept absolute paths. ++ [[\\/]]* | ?:[[\\/]]*) ++ re_direlt='/[[^/]][[^/]]*/\.\./' ++ # Canonicalize the pathname of ld ++ ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` ++ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ++ ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` ++ done ++ test -z "$LD" && LD="$ac_prog" ++ ;; ++ "") ++ # If it fails, then pretend we aren't using GCC. ++ ac_prog=ld ++ ;; ++ *) ++ # If it is relative, then search for the first ld in PATH. ++ with_gnu_ld=unknown ++ ;; ++ esac ++elif test "$with_gnu_ld" = yes; then ++ AC_MSG_CHECKING([for GNU ld]) ++else ++ AC_MSG_CHECKING([for non-GNU ld]) ++fi ++AC_CACHE_VAL(lt_cv_path_LD, ++[if test -z "$LD"; then ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then ++ lt_cv_path_LD="$ac_dir/$ac_prog" ++ # Check to see if the program is GNU ld. I'd rather use --version, ++ # but apparently some variants of GNU ld only accept -v. ++ # Break only if it was the GNU/non-GNU ld that we prefer. ++ case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null; then ++ case $host_cpu in ++ i*86 ) ++ # Not sure whether the presence of OpenBSD here was a mistake. ++ # Let's accept both of them until this is cleared up. ++ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' ++ lt_cv_file_magic_cmd=/usr/bin/file ++ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ++ ;; ++ esac ++ else ++ lt_cv_deplibs_check_method=pass_all ++ fi ++ ;; ++ ++gnu*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++hpux10.20* | hpux11*) ++ lt_cv_file_magic_cmd=/usr/bin/file ++ case $host_cpu in ++ ia64*) ++ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' ++ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ++ ;; ++ hppa*64*) ++ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] ++ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ++ ;; ++ *) ++ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' ++ lt_cv_file_magic_test_file=/usr/lib/libc.sl ++ ;; ++ esac ++ ;; ++ ++interix3*) ++ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' ++ ;; ++ ++irix5* | irix6* | nonstopux*) ++ case $LD in ++ *-32|*"-32 ") libmagic=32-bit;; ++ *-n32|*"-n32 ") libmagic=N32;; ++ *-64|*"-64 ") libmagic=64-bit;; ++ *) libmagic=never-match;; ++ esac ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++# This must be Linux ELF. ++linux* | k*bsd*-gnu) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' ++ else ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' ++ fi ++ ;; ++ ++newos6*) ++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' ++ lt_cv_file_magic_cmd=/usr/bin/file ++ lt_cv_file_magic_test_file=/usr/lib/libnls.so ++ ;; ++ ++nto-qnx*) ++ lt_cv_deplibs_check_method=unknown ++ ;; ++ ++openbsd*) ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' ++ else ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' ++ fi ++ ;; ++ ++osf3* | osf4* | osf5*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++solaris*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++sysv4 | sysv4.3*) ++ case $host_vendor in ++ motorola) ++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' ++ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ++ ;; ++ ncr) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ sequent) ++ lt_cv_file_magic_cmd='/bin/file' ++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ++ ;; ++ sni) ++ lt_cv_file_magic_cmd='/bin/file' ++ lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" ++ lt_cv_file_magic_test_file=/lib/libc.so ++ ;; ++ siemens) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ pc) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ esac ++ ;; ++ ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++esac ++]) ++file_magic_cmd=$lt_cv_file_magic_cmd ++deplibs_check_method=$lt_cv_deplibs_check_method ++test -z "$deplibs_check_method" && deplibs_check_method=unknown ++])# AC_DEPLIBS_CHECK_METHOD ++ ++ ++# AC_PROG_NM ++# ---------- ++# find the pathname to a BSD-compatible name lister ++AC_DEFUN([AC_PROG_NM], ++[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, ++[if test -n "$NM"; then ++ # Let the user override the test. ++ lt_cv_path_NM="$NM" ++else ++ lt_nm_to_check="${ac_tool_prefix}nm" ++ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then ++ lt_nm_to_check="$lt_nm_to_check nm" ++ fi ++ for lt_tmp_nm in $lt_nm_to_check; do ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ tmp_nm="$ac_dir/$lt_tmp_nm" ++ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then ++ # Check to see if the nm accepts a BSD-compat flag. ++ # Adding the `sed 1q' prevents false positives on HP-UX, which says: ++ # nm: unknown option "B" ignored ++ # Tru64's nm complains that /dev/null is an invalid object file ++ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in ++ */dev/null* | *'Invalid file or object type'*) ++ lt_cv_path_NM="$tmp_nm -B" ++ break ++ ;; ++ *) ++ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in ++ */dev/null*) ++ lt_cv_path_NM="$tmp_nm -p" ++ break ++ ;; ++ *) ++ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but ++ continue # so that we can try to find one that supports BSD flags ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ done ++ IFS="$lt_save_ifs" ++ done ++ test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm ++fi]) ++NM="$lt_cv_path_NM" ++])# AC_PROG_NM ++ ++ ++# AC_CHECK_LIBM ++# ------------- ++# check for math library ++AC_DEFUN([AC_CHECK_LIBM], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl ++LIBM= ++case $host in ++*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) ++ # These system don't have libm, or don't need it ++ ;; ++*-ncr-sysv4.3*) ++ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") ++ AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") ++ ;; ++*) ++ AC_CHECK_LIB(m, cos, LIBM="-lm") ++ ;; ++esac ++])# AC_CHECK_LIBM ++ ++ ++# AC_LIBLTDL_CONVENIENCE([DIRECTORY]) ++# ----------------------------------- ++# sets LIBLTDL to the link flags for the libltdl convenience library and ++# LTDLINCL to the include flags for the libltdl header and adds ++# --enable-ltdl-convenience to the configure arguments. Note that ++# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, ++# it is assumed to be `libltdl'. LIBLTDL will be prefixed with ++# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/' ++# (note the single quotes!). If your package is not flat and you're not ++# using automake, define top_builddir and top_srcdir appropriately in ++# the Makefiles. ++AC_DEFUN([AC_LIBLTDL_CONVENIENCE], ++[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl ++ case $enable_ltdl_convenience in ++ no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; ++ "") enable_ltdl_convenience=yes ++ ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; ++ esac ++ LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la ++ LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) ++ # For backwards non-gettext consistent compatibility... ++ INCLTDL="$LTDLINCL" ++])# AC_LIBLTDL_CONVENIENCE ++ ++ ++# AC_LIBLTDL_INSTALLABLE([DIRECTORY]) ++# ----------------------------------- ++# sets LIBLTDL to the link flags for the libltdl installable library and ++# LTDLINCL to the include flags for the libltdl header and adds ++# --enable-ltdl-install to the configure arguments. Note that ++# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, ++# and an installed libltdl is not found, it is assumed to be `libltdl'. ++# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with ++# '${top_srcdir}/' (note the single quotes!). If your package is not ++# flat and you're not using automake, define top_builddir and top_srcdir ++# appropriately in the Makefiles. ++# In the future, this macro may have to be called after AC_PROG_LIBTOOL. ++AC_DEFUN([AC_LIBLTDL_INSTALLABLE], ++[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl ++ AC_CHECK_LIB(ltdl, lt_dlinit, ++ [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], ++ [if test x"$enable_ltdl_install" = xno; then ++ AC_MSG_WARN([libltdl not installed, but installation disabled]) ++ else ++ enable_ltdl_install=yes ++ fi ++ ]) ++ if test x"$enable_ltdl_install" = x"yes"; then ++ ac_configure_args="$ac_configure_args --enable-ltdl-install" ++ LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la ++ LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) ++ else ++ ac_configure_args="$ac_configure_args --enable-ltdl-install=no" ++ LIBLTDL="-lltdl" ++ LTDLINCL= ++ fi ++ # For backwards non-gettext consistent compatibility... ++ INCLTDL="$LTDLINCL" ++])# AC_LIBLTDL_INSTALLABLE ++ ++ ++# AC_LIBTOOL_CXX ++# -------------- ++# enable support for C++ libraries ++AC_DEFUN([AC_LIBTOOL_CXX], ++[AC_REQUIRE([_LT_AC_LANG_CXX]) ++])# AC_LIBTOOL_CXX ++ ++ ++# _LT_AC_LANG_CXX ++# --------------- ++AC_DEFUN([_LT_AC_LANG_CXX], ++[AC_REQUIRE([AC_PROG_CXX]) ++AC_REQUIRE([_LT_AC_PROG_CXXCPP]) ++_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) ++])# _LT_AC_LANG_CXX ++ ++# _LT_AC_PROG_CXXCPP ++# ------------------ ++AC_DEFUN([_LT_AC_PROG_CXXCPP], ++[ ++AC_REQUIRE([AC_PROG_CXX]) ++if test -n "$CXX" && ( test "X$CXX" != "Xno" && ++ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || ++ (test "X$CXX" != "Xg++"))) ; then ++ AC_PROG_CXXCPP ++fi ++])# _LT_AC_PROG_CXXCPP ++ ++# AC_LIBTOOL_F77 ++# -------------- ++# enable support for Fortran 77 libraries ++AC_DEFUN([AC_LIBTOOL_F77], ++[AC_REQUIRE([_LT_AC_LANG_F77]) ++])# AC_LIBTOOL_F77 ++ ++ ++# _LT_AC_LANG_F77 ++# --------------- ++AC_DEFUN([_LT_AC_LANG_F77], ++[AC_REQUIRE([AC_PROG_F77]) ++_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77]) ++])# _LT_AC_LANG_F77 ++ ++ ++# AC_LIBTOOL_GCJ ++# -------------- ++# enable support for GCJ libraries ++AC_DEFUN([AC_LIBTOOL_GCJ], ++[AC_REQUIRE([_LT_AC_LANG_GCJ]) ++])# AC_LIBTOOL_GCJ ++ ++ ++# _LT_AC_LANG_GCJ ++# --------------- ++AC_DEFUN([_LT_AC_LANG_GCJ], ++[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], ++ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], ++ [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], ++ [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], ++ [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], ++ [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) ++_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ]) ++])# _LT_AC_LANG_GCJ ++ ++ ++# AC_LIBTOOL_RC ++# ------------- ++# enable support for Windows resource files ++AC_DEFUN([AC_LIBTOOL_RC], ++[AC_REQUIRE([LT_AC_PROG_RC]) ++_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC]) ++])# AC_LIBTOOL_RC ++ ++ ++# AC_LIBTOOL_LANG_C_CONFIG ++# ------------------------ ++# Ensure that the configuration vars for the C compiler are ++# suitably defined. Those variables are subsequently used by ++# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. ++AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) ++AC_DEFUN([_LT_AC_LANG_C_CONFIG], ++[lt_save_CC="$CC" ++AC_LANG_PUSH(C) ++ ++# Source file extension for C test sources. ++ac_ext=c ++ ++# Object file extension for compiled C test sources. ++objext=o ++_LT_AC_TAGVAR(objext, $1)=$objext ++ ++# Code to be used in simple compile tests ++lt_simple_compile_test_code="int some_variable = 0;\n" ++ ++# Code to be used in simple link tests ++lt_simple_link_test_code='int main(){return(0);}\n' ++ ++_LT_AC_SYS_COMPILER ++ ++# save warnings/boilerplate of simple test code ++_LT_COMPILER_BOILERPLATE ++_LT_LINKER_BOILERPLATE ++ ++AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) ++AC_LIBTOOL_PROG_COMPILER_PIC($1) ++AC_LIBTOOL_PROG_CC_C_O($1) ++AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) ++AC_LIBTOOL_PROG_LD_SHLIBS($1) ++AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) ++AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) ++AC_LIBTOOL_SYS_LIB_STRIP ++AC_LIBTOOL_DLOPEN_SELF ++ ++# Report which library types will actually be built ++AC_MSG_CHECKING([if libtool supports shared libraries]) ++AC_MSG_RESULT([$can_build_shared]) ++ ++AC_MSG_CHECKING([whether to build shared libraries]) ++test "$can_build_shared" = "no" && enable_shared=no ++ ++# On AIX, shared libraries and static libraries use the same namespace, and ++# are all built from PIC. ++case $host_os in ++aix3*) ++ test "$enable_shared" = yes && enable_static=no ++ if test -n "$RANLIB"; then ++ archive_cmds="$archive_cmds~\$RANLIB \$lib" ++ postinstall_cmds='$RANLIB $lib' ++ fi ++ ;; ++ ++aix4* | aix5*) ++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then ++ test "$enable_shared" = yes && enable_static=no ++ fi ++ ;; ++esac ++AC_MSG_RESULT([$enable_shared]) ++ ++AC_MSG_CHECKING([whether to build static libraries]) ++# Make sure either enable_shared or enable_static is yes. ++test "$enable_shared" = yes || enable_static=yes ++AC_MSG_RESULT([$enable_static]) ++ ++AC_LIBTOOL_CONFIG($1) ++ ++AC_LANG_POP ++CC="$lt_save_CC" ++])# AC_LIBTOOL_LANG_C_CONFIG ++ ++ ++# AC_LIBTOOL_LANG_CXX_CONFIG ++# -------------------------- ++# Ensure that the configuration vars for the C compiler are ++# suitably defined. Those variables are subsequently used by ++# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. ++AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)]) ++AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], ++[AC_LANG_PUSH(C++) ++AC_REQUIRE([AC_PROG_CXX]) ++AC_REQUIRE([_LT_AC_PROG_CXXCPP]) ++ ++_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ++_LT_AC_TAGVAR(allow_undefined_flag, $1)= ++_LT_AC_TAGVAR(always_export_symbols, $1)=no ++_LT_AC_TAGVAR(archive_expsym_cmds, $1)= ++_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= ++_LT_AC_TAGVAR(hardcode_direct, $1)=no ++_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= ++_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= ++_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= ++_LT_AC_TAGVAR(hardcode_minus_L, $1)=no ++_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported ++_LT_AC_TAGVAR(hardcode_automatic, $1)=no ++_LT_AC_TAGVAR(module_cmds, $1)= ++_LT_AC_TAGVAR(module_expsym_cmds, $1)= ++_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown ++_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds ++_LT_AC_TAGVAR(no_undefined_flag, $1)= ++_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= ++_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no ++ ++# Dependencies to place before and after the object being linked: ++_LT_AC_TAGVAR(predep_objects, $1)= ++_LT_AC_TAGVAR(postdep_objects, $1)= ++_LT_AC_TAGVAR(predeps, $1)= ++_LT_AC_TAGVAR(postdeps, $1)= ++_LT_AC_TAGVAR(compiler_lib_search_path, $1)= ++ ++# Source file extension for C++ test sources. ++ac_ext=cpp ++ ++# Object file extension for compiled C++ test sources. ++objext=o ++_LT_AC_TAGVAR(objext, $1)=$objext ++ ++# Code to be used in simple compile tests ++lt_simple_compile_test_code="int some_variable = 0;\n" ++ ++# Code to be used in simple link tests ++lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }\n' ++ ++# ltmain only uses $CC for tagged configurations so make sure $CC is set. ++_LT_AC_SYS_COMPILER ++ ++# save warnings/boilerplate of simple test code ++_LT_COMPILER_BOILERPLATE ++_LT_LINKER_BOILERPLATE ++ ++# Allow CC to be a program name with arguments. ++lt_save_CC=$CC ++lt_save_LD=$LD ++lt_save_GCC=$GCC ++GCC=$GXX ++lt_save_with_gnu_ld=$with_gnu_ld ++lt_save_path_LD=$lt_cv_path_LD ++if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then ++ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx ++else ++ $as_unset lt_cv_prog_gnu_ld ++fi ++if test -n "${lt_cv_path_LDCXX+set}"; then ++ lt_cv_path_LD=$lt_cv_path_LDCXX ++else ++ $as_unset lt_cv_path_LD ++fi ++test -z "${LDCXX+set}" || LD=$LDCXX ++CC=${CXX-"c++"} ++compiler=$CC ++_LT_AC_TAGVAR(compiler, $1)=$CC ++_LT_CC_BASENAME([$compiler]) ++ ++# We don't want -fno-exception wen compiling C++ code, so set the ++# no_builtin_flag separately ++if test "$GXX" = yes; then ++ _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ++else ++ _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= ++fi ++ ++if test "$GXX" = yes; then ++ # Set up default GNU C++ configuration ++ ++ AC_PROG_LD ++ ++ # Check if GNU C++ uses GNU ld as the underlying linker, since the ++ # archiving commands below assume that GNU ld is being used. ++ if test "$with_gnu_ld" = yes; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ ++ # If archive_cmds runs LD, not CC, wlarc should be empty ++ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to ++ # investigate it a little bit more. (MM) ++ wlarc='${wl}' ++ ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ ++ grep 'no-whole-archive' > /dev/null; then ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= ++ fi ++ else ++ with_gnu_ld=no ++ wlarc= ++ ++ # A generic and very simple default shared library creation ++ # command for GNU C++ for the case where it uses the native ++ # linker, instead of GNU ld. If possible, this setting should ++ # overridden to take advantage of the native linker features on ++ # the platform it is being used on. ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' ++ fi ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' ++ ++else ++ GXX=no ++ with_gnu_ld=no ++ wlarc= ++fi ++ ++# PORTME: fill in a description of your system's C++ link characteristics ++AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) ++_LT_AC_TAGVAR(ld_shlibs, $1)=yes ++case $host_os in ++ aix3*) ++ # FIXME: insert proper C++ library support ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ aix4* | aix5*) ++ if test "$host_cpu" = ia64; then ++ # On IA64, the linker does run time linking by default, so we don't ++ # have to do anything special. ++ aix_use_runtimelinking=no ++ exp_sym_flag='-Bexport' ++ no_entry_flag="" ++ else ++ aix_use_runtimelinking=no ++ ++ # Test if we are trying to use run time linking or normal ++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we ++ # need to do runtime linking. ++ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) ++ for ld_flag in $LDFLAGS; do ++ case $ld_flag in ++ *-brtl*) ++ aix_use_runtimelinking=yes ++ break ++ ;; ++ esac ++ done ++ ;; ++ esac ++ ++ exp_sym_flag='-bexport' ++ no_entry_flag='-bnoentry' ++ fi ++ ++ # When large executables or shared objects are built, AIX ld can ++ # have problems creating the table of contents. If linking a library ++ # or program results in "error TOC overflow" add -mminimal-toc to ++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not ++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. ++ ++ _LT_AC_TAGVAR(archive_cmds, $1)='' ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ++ ++ if test "$GXX" = yes; then ++ case $host_os in aix4.[[012]]|aix4.[[012]].*) ++ # We only want to do this on AIX 4.2 and lower, the check ++ # below for broken collect2 doesn't work under 4.3+ ++ collect2name=`${CC} -print-prog-name=collect2` ++ if test -f "$collect2name" && \ ++ strings "$collect2name" | grep resolve_lib_name >/dev/null ++ then ++ # We have reworked collect2 ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ else ++ # We have old collect2 ++ _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported ++ # It fails to find uninstalled libraries when the uninstalled ++ # path is not listed in the libpath. Setting hardcode_minus_L ++ # to unsupported forces relinking ++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= ++ fi ++ ;; ++ esac ++ shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi ++ else ++ # not using gcc ++ if test "$host_cpu" = ia64; then ++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release ++ # chokes on -Wl,-G. The following line is correct: ++ shared_flag='-G' ++ else ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag='${wl}-G' ++ else ++ shared_flag='${wl}-bM:SRE' ++ fi ++ fi ++ fi ++ ++ # It seems that -bexpall does not export symbols beginning with ++ # underscore (_), so it is better to generate a list of symbols to export. ++ _LT_AC_TAGVAR(always_export_symbols, $1)=yes ++ if test "$aix_use_runtimelinking" = yes; then ++ # Warning - without using the other runtime loading flags (-brtl), ++ # -berok will link without error, but may produce a broken library. ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' ++ # Determine the default libpath from the value encoded in an empty executable. ++ _LT_AC_SYS_LIBPATH_AIX ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" ++ ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ else ++ if test "$host_cpu" = ia64; then ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" ++ else ++ # Determine the default libpath from the value encoded in an empty executable. ++ _LT_AC_SYS_LIBPATH_AIX ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" ++ # Warning - without using the other run time loading flags, ++ # -berok will link without error, but may produce a broken library. ++ _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' ++ # Exported symbols can be pulled into shared objects from archives ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' ++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes ++ # This is similar to how AIX traditionally builds its shared libraries. ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ fi ++ fi ++ ;; ++ ++ beos*) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ else ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ ++ chorus*) ++ case $cc_basename in ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ ;; ++ ++ cygwin* | mingw* | pw32*) ++ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, ++ # as there is no search path for DLLs. ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported ++ _LT_AC_TAGVAR(always_export_symbols, $1)=no ++ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ++ ++ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ # If the export-symbols file already is a .def file (1st line ++ # is EXPORTS), use it as is; otherwise, prepend... ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ cp $export_symbols $output_objdir/$soname.def; ++ else ++ echo EXPORTS > $output_objdir/$soname.def; ++ cat $export_symbols >> $output_objdir/$soname.def; ++ fi~ ++ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ darwin* | rhapsody*) ++ case $host_os in ++ rhapsody* | darwin1.[[012]]) ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' ++ ;; ++ *) # Darwin 1.3 on ++ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ else ++ case ${MACOSX_DEPLOYMENT_TARGET} in ++ 10.[[012]]) ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ ;; ++ 10.*) ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' ++ ;; ++ esac ++ fi ++ ;; ++ esac ++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_AC_TAGVAR(hardcode_direct, $1)=no ++ _LT_AC_TAGVAR(hardcode_automatic, $1)=yes ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ++ ++ if test "$GXX" = yes ; then ++ lt_int_apple_cc_single_mod=no ++ output_verbose_link_cmd='echo' ++ if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then ++ lt_int_apple_cc_single_mod=yes ++ fi ++ if test "X$lt_int_apple_cc_single_mod" = Xyes ; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' ++ else ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' ++ fi ++ _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ if test "X$lt_int_apple_cc_single_mod" = Xyes ; then ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ else ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ fi ++ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ else ++ case $cc_basename in ++ xlc*) ++ output_verbose_link_cmd='echo' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' ++ _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ ;; ++ *) ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ fi ++ ;; ++ ++ dgux*) ++ case $cc_basename in ++ ec++*) ++ # FIXME: insert proper C++ library support ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ ghcx*) ++ # Green Hills C++ Compiler ++ # FIXME: insert proper C++ library support ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ ;; ++ freebsd[[12]]*) ++ # C++ shared libraries reported to be fairly broken before switch to ELF ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ freebsd-elf*) ++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ++ ;; ++ freebsd* | dragonfly*) ++ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF ++ # conventions ++ _LT_AC_TAGVAR(ld_shlibs, $1)=yes ++ ;; ++ gnu*) ++ ;; ++ hpux9*) ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, ++ # but as the default ++ # location of the library. ++ ++ case $cc_basename in ++ CC*) ++ # FIXME: insert proper C++ library support ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ aCC*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ++ ;; ++ *) ++ if test "$GXX" = yes; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ else ++ # FIXME: insert proper C++ library support ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ;; ++ hpux10*|hpux11*) ++ if test $with_gnu_ld = no; then ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ case $host_cpu in ++ hppa*64*|ia64*) ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' ++ ;; ++ *) ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ ;; ++ esac + fi +- ]) +- CFLAGS="$save_CFLAGS" +- AC_MSG_RESULT([$compiler_rtti_exceptions]) ++ case $host_cpu in ++ hppa*64*|ia64*) ++ _LT_AC_TAGVAR(hardcode_direct, $1)=no ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ *) ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, ++ # but as the default ++ # location of the library. ++ ;; ++ esac ++ ++ case $cc_basename in ++ CC*) ++ # FIXME: insert proper C++ library support ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ aCC*) ++ case $host_cpu in ++ hppa*64*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ ia64*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ *) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ esac ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ++ ;; ++ *) ++ if test "$GXX" = yes; then ++ if test $with_gnu_ld = no; then ++ case $host_cpu in ++ hppa*64*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ ia64*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ *) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ esac ++ fi ++ else ++ # FIXME: insert proper C++ library support ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ;; ++ interix3*) ++ _LT_AC_TAGVAR(hardcode_direct, $1)=no ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; ++ irix5* | irix6*) ++ case $cc_basename in ++ CC*) ++ # SGI C++ ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ ++ # Archives containing C++ object files must be created using ++ # "CC -ar", where "CC" is the IRIX C++ compiler. This is ++ # necessary to make sure instantiated templates are included ++ # in the archive. ++ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' ++ ;; ++ *) ++ if test "$GXX" = yes; then ++ if test "$with_gnu_ld" = no; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' ++ fi ++ fi ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ++ ;; ++ esac ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++ ;; ++ linux* | k*bsd*-gnu) ++ case $cc_basename in ++ KCC*) ++ # Kuck and Associates, Inc. (KAI) C++ Compiler ++ ++ # KCC will only create a shared library if the output file ++ # ends with ".so" (or ".sl" for HP-UX), so rename the library ++ # to its proper name (with version) after linking. ++ _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ++ ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir' ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ ++ # Archives containing C++ object files must be created using ++ # "CC -Bstatic", where "CC" is the KAI C++ compiler. ++ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ++ ;; ++ icpc*) ++ # Intel C++ ++ with_gnu_ld=yes ++ # version 8.0 and above of icpc choke on multiply defined symbols ++ # if we add $predep_objects and $postdep_objects, however 7.1 and ++ # earlier do not add the objects themselves. ++ case `$CC -V 2>&1` in ++ *"Version 7."*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ;; ++ *) # Version 8.0 or newer ++ tmp_idyn= ++ case $host_cpu in ++ ia64*) tmp_idyn=' -i_dynamic';; ++ esac ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ;; ++ esac ++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ++ ;; ++ pgCC*) ++ # Portland Group C++ compiler ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ++ ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ ;; ++ cxx*) ++ # Compaq C++ ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' ++ ++ runpath_var=LD_RUN_PATH ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ++ ;; ++ esac ++ ;; ++ lynxos*) ++ # FIXME: insert proper C++ library support ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ m88k*) ++ # FIXME: insert proper C++ library support ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ mvs*) ++ case $cc_basename in ++ cxx*) ++ # FIXME: insert proper C++ library support ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ ;; ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' ++ wlarc= ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ fi ++ # Workaround some broken pre-1.5 toolchains ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ++ ;; ++ openbsd2*) ++ # C++ shared libraries are fairly broken ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ openbsd*) ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ fi ++ output_verbose_link_cmd='echo' ++ ;; ++ osf3*) ++ case $cc_basename in ++ KCC*) ++ # Kuck and Associates, Inc. (KAI) C++ Compiler ++ ++ # KCC will only create a shared library if the output file ++ # ends with ".so" (or ".sl" for HP-UX), so rename the library ++ # to its proper name (with version) after linking. ++ _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' ++ ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ # Archives containing C++ object files must be created using ++ # "CC -Bstatic", where "CC" is the KAI C++ compiler. ++ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ++ ++ ;; ++ RCC*) ++ # Rational C++ 2.4.1 ++ # FIXME: insert proper C++ library support ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ cxx*) ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ++ ;; ++ *) ++ if test "$GXX" = yes && test "$with_gnu_ld" = no; then ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' ++ ++ else ++ # FIXME: insert proper C++ library support ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ;; ++ osf4* | osf5*) ++ case $cc_basename in ++ KCC*) ++ # Kuck and Associates, Inc. (KAI) C++ Compiler ++ ++ # KCC will only create a shared library if the output file ++ # ends with ".so" (or ".sl" for HP-UX), so rename the library ++ # to its proper name (with version) after linking. ++ _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' ++ ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ # Archives containing C++ object files must be created using ++ # the KAI C++ compiler. ++ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ++ ;; ++ RCC*) ++ # Rational C++ 2.4.1 ++ # FIXME: insert proper C++ library support ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ cxx*) ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ ++ echo "-hidden">> $lib.exp~ ++ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ ++ $rm $lib.exp' ++ ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ++ ;; ++ *) ++ if test "$GXX" = yes && test "$with_gnu_ld" = no; then ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' ++ ++ else ++ # FIXME: insert proper C++ library support ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ;; ++ psos*) ++ # FIXME: insert proper C++ library support ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ sunos4*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.x ++ # FIXME: insert proper C++ library support ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ lcc*) ++ # Lucid ++ # FIXME: insert proper C++ library support ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ ;; ++ solaris*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.2, 5.x and Centerline C++ ++ _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes ++ _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ ++ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' ++ ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ case $host_os in ++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; ++ *) ++ # The C++ compiler is used as linker so we must use $wl ++ # flag to pass the commands to the underlying system ++ # linker. We must also pass each convience library through ++ # to the system linker between allextract/defaultextract. ++ # The C++ compiler will combine linker options so we ++ # cannot just pass the convience library names through ++ # without $wl. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ++ ;; ++ esac ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ++ ++ output_verbose_link_cmd='echo' ++ ++ # Archives containing C++ object files must be created using ++ # "CC -xar", where "CC" is the Sun C++ compiler. This is ++ # necessary to make sure instantiated templates are included ++ # in the archive. ++ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ++ ;; ++ gcx*) ++ # Green Hills C++ Compiler ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++ ++ # The C++ compiler must be used to create the archive. ++ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ++ ;; ++ *) ++ # GNU C++ compiler with Solaris linker ++ if test "$GXX" = yes && test "$with_gnu_ld" = no; then ++ _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' ++ if $CC --version | grep -v '^2\.7' > /dev/null; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ ++ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" ++ else ++ # g++ 2.7 appears to require `-G' NOT `-shared' on this ++ # platform. ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ ++ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" ++ fi ++ ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' ++ fi ++ ;; ++ esac ++ ;; ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) ++ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ runpath_var='LD_RUN_PATH' ++ ++ case $cc_basename in ++ CC*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ ;; ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ # For security reasons, it is highly recommended that you always ++ # use absolute paths for naming shared libraries, and exclude the ++ # DT_RUNPATH tag from executables and libraries. But doing so ++ # requires that you compile everything twice, which is a pain. ++ # So that behaviour is only enabled if SCOABSPATH is set to a ++ # non-empty value in the environment. Most likely only useful for ++ # creating official distributions of packages. ++ # This is a hack until libtool officially supports absolute path ++ # names for shared libraries. ++ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' ++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' ++ runpath_var='LD_RUN_PATH' ++ ++ case $cc_basename in ++ CC*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ ;; ++ tandem*) ++ case $cc_basename in ++ NCC*) ++ # NonStop-UX NCC 3.20 ++ # FIXME: insert proper C++ library support ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ ;; ++ vxworks*) ++ # FIXME: insert proper C++ library support ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++esac ++AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) ++test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no ++ ++_LT_AC_TAGVAR(GCC, $1)="$GXX" ++_LT_AC_TAGVAR(LD, $1)="$LD" ++ ++AC_LIBTOOL_POSTDEP_PREDEP($1) ++AC_LIBTOOL_PROG_COMPILER_PIC($1) ++AC_LIBTOOL_PROG_CC_C_O($1) ++AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) ++AC_LIBTOOL_PROG_LD_SHLIBS($1) ++AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) ++AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) ++ ++AC_LIBTOOL_CONFIG($1) ++ ++AC_LANG_POP ++CC=$lt_save_CC ++LDCXX=$LD ++LD=$lt_save_LD ++GCC=$lt_save_GCC ++with_gnu_ldcxx=$with_gnu_ld ++with_gnu_ld=$lt_save_with_gnu_ld ++lt_cv_path_LDCXX=$lt_cv_path_LD ++lt_cv_path_LD=$lt_save_path_LD ++lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld ++lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld ++])# AC_LIBTOOL_LANG_CXX_CONFIG ++ ++# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME]) ++# ------------------------------------ ++# Figure out "hidden" library dependencies from verbose ++# compiler output when linking a shared library. ++# Parse the compiler output and extract the necessary ++# objects, libraries and library flags. ++AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[ ++dnl we can't use the lt_simple_compile_test_code here, ++dnl because it contains code intended for an executable, ++dnl not a library. It's possible we should let each ++dnl tag define a new lt_????_link_test_code variable, ++dnl but it's only used here... ++ifelse([$1],[],[cat > conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext <> "$cfgfile" ++ifelse([$1], [], ++[#! $SHELL ++ ++# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. ++# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) ++# NOTE: Changes made to this file will be lost: look at ltmain.sh. ++# ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 ++# Free Software Foundation, Inc. ++# ++# This file is part of GNU Libtool: ++# Originally by Gordon Matzigkeit , 1996 ++# ++# This program is free software; you can redistribute it and/or modify ++# it under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 2 of the License, or ++# (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, but ++# WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++# General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++# ++# As a special exception to the GNU General Public License, if you ++# distribute this file as part of a program that contains a ++# configuration script generated by Autoconf, you may include it under ++# the same distribution terms that you use for the rest of that program. ++ ++# A sed program that does not truncate output. ++SED=$lt_SED ++ ++# Sed that helps us avoid accidentally triggering echo(1) options like -n. ++Xsed="$SED -e 1s/^X//" ++ ++# The HP-UX ksh and POSIX shell print the target directory to stdout ++# if CDPATH is set. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++ ++# The names of the tagged configurations supported by this script. ++available_tags= ++ ++# ### BEGIN LIBTOOL CONFIG], ++[# ### BEGIN LIBTOOL TAG CONFIG: $tagname]) ++ ++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: ++ ++# Shell to use when invoking shell scripts. ++SHELL=$lt_SHELL + +- if test "$compiler_rtti_exceptions" = "yes"; then +- no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' +- else +- no_builtin_flag=' -fno-builtin' +- fi +-fi ++# Whether or not to build shared libraries. ++build_libtool_libs=$enable_shared + +-# See if the linker supports building shared libraries. +-AC_MSG_CHECKING([whether the linker ($LD) supports shared libraries]) ++# Whether or not to build static libraries. ++build_old_libs=$enable_static + +-allow_undefined_flag= +-no_undefined_flag= +-need_lib_prefix=unknown +-need_version=unknown +-# when you set need_version to no, make sure it does not cause -set_version +-# flags to be left without arguments +-archive_cmds= +-archive_expsym_cmds= +-old_archive_from_new_cmds= +-old_archive_from_expsyms_cmds= +-export_dynamic_flag_spec= +-whole_archive_flag_spec= +-thread_safe_flag_spec= +-hardcode_into_libs=no +-hardcode_libdir_flag_spec= +-hardcode_libdir_separator= +-hardcode_direct=no +-hardcode_minus_L=no +-hardcode_shlibpath_var=unsupported +-runpath_var= +-link_all_deplibs=unknown +-always_export_symbols=no +-export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' +-# include_expsyms should be a list of space-separated symbols to be *always* +-# included in the symbol list +-include_expsyms= +-# exclude_expsyms can be an egrep regular expression of symbols to exclude +-# it will be wrapped by ` (' and `)$', so one must not match beginning or +-# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', +-# as well as any symbol that contains `d'. +-exclude_expsyms="_GLOBAL_OFFSET_TABLE_" +-# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out +-# platforms (ab)use it in PIC code, but their linkers get confused if +-# the symbol is explicitly referenced. Since portable code cannot +-# rely on this symbol name, it's probably fine to never include it in +-# preloaded symbol tables. +-extract_expsyms_cmds= ++# Whether or not to add -lc for building shared libraries. ++build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1) + +-case $host_os in +-cygwin* | mingw* | pw32* ) +- # FIXME: the MSVC++ port hasn't been tested in a loooong time +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- if test "$GCC" != yes; then +- with_gnu_ld=no +- fi +- ;; ++# Whether or not to disallow shared libs when runtime libs are static ++allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) + +-esac ++# Whether or not to optimize for fast installation. ++fast_install=$enable_fast_install + +-ld_shlibs=yes +-if test "$with_gnu_ld" = yes; then +- # If archive_cmds runs LD, not CC, wlarc should be empty +- wlarc='${wl}' ++# The host system. ++host_alias=$host_alias ++host=$host ++host_os=$host_os + +- # See if GNU ld supports shared libraries. +- case $host_os in +- aix3* | aix4* | aix5*) +- # On AIX, the GNU linker is very broken +- # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available. +- ld_shlibs=no +- cat <&2 ++# The build system. ++build_alias=$build_alias ++build=$build ++build_os=$build_os + +-*** Warning: the GNU linker, at least up to release 2.9.1, is reported +-*** to be unable to reliably create shared libraries on AIX. +-*** Therefore, libtool is disabling shared libraries support. If you +-*** really care for shared libraries, you may want to modify your PATH +-*** so that a non-GNU linker is found, and then restart. ++# An echo program that does not interpret backslashes. ++echo=$lt_echo + +-EOF +- ;; ++# The archiver. ++AR=$lt_AR ++AR_FLAGS=$lt_AR_FLAGS + +- amigaos*) +- archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_minus_L=yes +- +- # Samuel A. Falvo II reports +- # that the semantics of dynamic libraries on AmigaOS, at least up +- # to version 4, is to share data among multiple programs linked +- # with the same dynamic library. Since this doesn't match the +- # behavior of shared libraries on other platforms, we can use +- # them. +- ld_shlibs=no +- ;; ++# A C compiler. ++LTCC=$lt_LTCC + +- beos*) +- if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then +- allow_undefined_flag=unsupported +- # Joseph Beckenbach says some releases of gcc +- # support --undefined. This deserves some investigation. FIXME +- archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- else +- ld_shlibs=no +- fi +- ;; ++# LTCC compiler flags. ++LTCFLAGS=$lt_LTCFLAGS + +- cygwin* | mingw* | pw32*) +- # hardcode_libdir_flag_spec is actually meaningless, as there is +- # no search path for DLLs. +- hardcode_libdir_flag_spec='-L$libdir' +- allow_undefined_flag=unsupported +- always_export_symbols=yes +- +- extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ +- sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ +- test -f $output_objdir/impgen.exe || (cd $output_objdir && \ +- if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ +- else $CC -o impgen impgen.c ; fi)~ +- $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' +- +- old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' +- +- # cygwin and mingw dlls have different entry points and sets of symbols +- # to exclude. +- # FIXME: what about values for MSVC? +- dll_entry=__cygwin_dll_entry@12 +- dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ +- case $host_os in +- mingw*) +- # mingw values +- dll_entry=_DllMainCRTStartup@12 +- dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ +- ;; +- esac ++# A language-specific compiler. ++CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) + +- # mingw and cygwin differ, and it's simplest to just exclude the union +- # of the two symbol sets. +- dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 +- +- # recent cygwin and mingw systems supply a stub DllMain which the user +- # can override, but on older systems we have to supply one (in ltdll.c) +- if test "x$lt_cv_need_dllmain" = "xyes"; then +- ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " +- ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < [$]0 > $output_objdir/$soname-ltdll.c~ +- test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' +- else +- ltdll_obj= +- ltdll_cmds= +- fi ++# Is the compiler the GNU C compiler? ++with_gcc=$_LT_AC_TAGVAR(GCC, $1) + +- # Extract the symbol export list from an `--export-all' def file, +- # then regenerate the def file from the symbol export list, so that +- # the compiled dll only exports the symbol export list. +- # Be careful not to strip the DATA tag left be newer dlltools. +- export_symbols_cmds="$ltdll_cmds"' +- $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ +- [sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//"] < $output_objdir/$soname-def > $export_symbols' +- +- # If the export-symbols file already is a .def file (1st line +- # is EXPORTS), use it as is. +- # If DATA tags from a recent dlltool are present, honour them! +- archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then +- cp $export_symbols $output_objdir/$soname-def; +- else +- echo EXPORTS > $output_objdir/$soname-def; +- _lt_hint=1; +- cat $export_symbols | while read symbol; do +- set dummy \$symbol; +- case \[$]# in +- 2) echo " \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; +- *) echo " \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;; +- esac; +- _lt_hint=`expr 1 + \$_lt_hint`; +- done; +- fi~ +- '"$ltdll_cmds"' +- $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ +- $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ +- $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ +- $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ +- $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' +- ;; ++# An ERE matcher. ++EGREP=$lt_EGREP + +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' +- wlarc= +- else +- archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- fi +- ;; ++# The linker used to build libraries. ++LD=$lt_[]_LT_AC_TAGVAR(LD, $1) + +- solaris* | sysv5*) +- if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then +- ld_shlibs=no +- cat <&2 ++# Whether we need hard or soft links. ++LN_S=$lt_LN_S + +-*** Warning: The releases 2.8.* of the GNU linker cannot reliably +-*** create shared libraries on Solaris systems. Therefore, libtool +-*** is disabling shared libraries support. We urge you to upgrade GNU +-*** binutils to release 2.9.1 or newer. Another option is to modify +-*** your PATH or compiler configuration so that the native linker is +-*** used, and then restart. ++# A BSD-compatible nm program. ++NM=$lt_NM + +-EOF +- elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- ld_shlibs=no +- fi +- ;; ++# A symbol stripping program ++STRIP=$lt_STRIP + +- sunos4*) +- archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- wlarc= +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- ;; ++# Used to examine libraries when file_magic_cmd begins "file" ++MAGIC_CMD=$MAGIC_CMD + +- *) +- if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- ld_shlibs=no +- fi +- ;; +- esac ++# Used on cygwin: DLL creation program. ++DLLTOOL="$DLLTOOL" + +- if test "$ld_shlibs" = yes; then +- runpath_var=LD_RUN_PATH +- hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' +- export_dynamic_flag_spec='${wl}--export-dynamic' +- case $host_os in +- cygwin* | mingw* | pw32*) +- # dlltool doesn't understand --whole-archive et. al. +- whole_archive_flag_spec= +- ;; +- *) +- # ancient GNU ld didn't support --whole-archive et. al. +- if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then +- whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- else +- whole_archive_flag_spec= +- fi +- ;; +- esac +- fi +-else +- # PORTME fill in a description of your system's linker (not GNU ld) +- case $host_os in +- aix3*) +- allow_undefined_flag=unsupported +- always_export_symbols=yes +- archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' +- # Note: this linker hardcodes the directories in LIBPATH if there +- # are no directories specified by -L. +- hardcode_minus_L=yes +- if test "$GCC" = yes && test -z "$link_static_flag"; then +- # Neither direct hardcoding nor static linking is supported with a +- # broken collect2. +- hardcode_direct=unsupported +- fi +- ;; ++# Used on cygwin: object dumper. ++OBJDUMP="$OBJDUMP" + +- aix4* | aix5*) +- # When large executables or shared objects are built, AIX ld can +- # have problems creating the table of contents. If linking a library +- # or program results in "error TOC overflow" add -mminimal-toc to +- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not +- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. ++# Used on cygwin: assembler. ++AS="$AS" + +- archive_cmds='' +- hardcode_libdir_separator=':' +- if test "$GCC" = yes; then +- collect2name=`${CC} -print-prog-name=collect2` +- if test -f "$collect2name" && \ +- strings "$collect2name" | grep resolve_lib_name >/dev/null +- then +- # We have reworked collect2 +- hardcode_direct=yes +- else +- # We have old collect2 +- hardcode_direct=unsupported +- # It fails to find uninstalled libraries when the uninstalled +- # path is not listed in the libpath. Setting hardcode_minus_L +- # to unsupported forces relinking +- hardcode_minus_L=yes +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_libdir_separator= +- fi +- shared_flag='-shared' +- else +- if test "$host_cpu" = ia64; then +- shared_flag='-G' +- else +- shared_flag='${wl}-bM:SRE' +- fi +- hardcode_direct=yes +- fi ++# The name of the directory that contains temporary libtool files. ++objdir=$objdir + +- if test "$host_cpu" = ia64; then +- # On IA64, the linker does run time linking by default, so we don't +- # have to do anything special. +- aix_use_runtimelinking=no +- exp_sym_flag='-Bexport' +- no_entry_flag="" +- else +- # Test if we are trying to use run time linking, or normal AIX style linking. +- # If -brtl is somewhere in LDFLAGS, we need to do run time linking. +- aix_use_runtimelinking=no +- for ld_flag in $LDFLAGS; do +- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl" ); then +- aix_use_runtimelinking=yes +- break +- fi +- done +- exp_sym_flag='-bexport' +- no_entry_flag='-bnoentry' +- fi +- # It seems that -bexpall can do strange things, so it is better to +- # generate a list of symbols to export. +- always_export_symbols=yes +- if test "$aix_use_runtimelinking" = yes; then +- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib' +- allow_undefined_flag=' -Wl,-G' +- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" +- else +- if test "$host_cpu" = ia64; then +- hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' +- allow_undefined_flag="-znodefs" +- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" +- else +- hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib' +- # Warning - without using the other run time loading flags, -berok will +- # link without error, but may produce a broken library. +- allow_undefined_flag='${wl}-berok' +- # This is a bit strange, but is similar to how AIX traditionally builds +- # it's shared libraries. +- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname' +- fi +- fi +- ;; ++# How to create reloadable object files. ++reload_flag=$lt_reload_flag ++reload_cmds=$lt_reload_cmds + +- amigaos*) +- archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_minus_L=yes +- # see comment about different semantics on the GNU ld section +- ld_shlibs=no +- ;; ++# How to pass a linker flag through the compiler. ++wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) + +- cygwin* | mingw* | pw32*) +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- # hardcode_libdir_flag_spec is actually meaningless, as there is +- # no search path for DLLs. +- hardcode_libdir_flag_spec=' ' +- allow_undefined_flag=unsupported +- # Tell ltmain to make .lib files, not .a files. +- libext=lib +- # FIXME: Setting linknames here is a bad hack. +- archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' +- # The linker will automatically build a .lib file if we build a DLL. +- old_archive_from_new_cmds='true' +- # FIXME: Should let the user specify the lib program. +- old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' +- fix_srcfile_path='`cygpath -w "$srcfile"`' +- ;; +- +- darwin* | rhapsody*) +- allow_undefined_flag='-undefined suppress' +- # FIXME: Relying on posixy $() will cause problems for +- # cross-compilation, but unfortunately the echo tests do not +- # yet detect zsh echo's removal of \ escapes. +- archive_cmds='$CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linkopts -install_name $rpath/$soname $(test -n "$verstring" -a x$verstring != x0.0 && echo $verstring)' +- # We need to add '_' to the symbols in $export_symbols first +- #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols' +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- whole_archive_flag_spec='-all_load $convenience' +- ;; +- +- freebsd1*) +- ld_shlibs=no +- ;; +- +- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor +- # support. Future versions do this automatically, but an explicit c++rt0.o +- # does not break anything, and helps significantly (at the cost of a little +- # extra space). +- freebsd2.2*) +- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' +- hardcode_libdir_flag_spec='-R$libdir' +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- ;; ++# Object file suffix (normally "o"). ++objext="$ac_objext" + +- # Unfortunately, older versions of FreeBSD 2 do not have this feature. +- freebsd2*) +- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct=yes +- hardcode_minus_L=yes +- hardcode_shlibpath_var=no +- ;; ++# Old archive suffix (normally "a"). ++libext="$libext" + +- # FreeBSD 3 and greater uses gcc -shared to do shared libraries. +- freebsd*) +- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec='-R$libdir' +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- ;; ++# Shared library suffix (normally ".so"). ++shrext_cmds='$shrext_cmds' + +- hpux9* | hpux10* | hpux11*) +- case $host_os in +- hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; +- *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;; +- esac +- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator=: +- hardcode_direct=yes +- hardcode_minus_L=yes # Not in the search PATH, but as the default +- # location of the library. +- export_dynamic_flag_spec='${wl}-E' +- ;; ++# Executable file suffix (normally ""). ++exeext="$exeext" + +- irix5* | irix6*) +- if test "$GCC" = yes; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- fi +- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator=: +- link_all_deplibs=yes +- ;; ++# Additional compiler flags for building library objects. ++pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) ++pic_mode=$pic_mode + +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out +- else +- archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF +- fi +- hardcode_libdir_flag_spec='-R$libdir' +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- ;; ++# What is the maximum length of a command? ++max_cmd_len=$lt_cv_sys_max_cmd_len + +- newsos6) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts' +- hardcode_direct=yes +- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator=: +- hardcode_shlibpath_var=no +- ;; ++# Does compiler simultaneously support -c and -o options? ++compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) + +- openbsd*) +- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec='-R$libdir' +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- ;; ++# Must we lock files when doing compilation? ++need_locks=$lt_need_locks + +- os2*) +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_minus_L=yes +- allow_undefined_flag=unsupported +- archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' +- old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' +- ;; ++# Do we need the lib prefix for modules? ++need_lib_prefix=$need_lib_prefix + +- osf3*) +- if test "$GCC" = yes; then +- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- allow_undefined_flag=' -expect_unresolved \*' +- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- fi +- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator=: +- ;; ++# Do we need a version for libraries? ++need_version=$need_version ++ ++# Whether dlopen is supported. ++dlopen_support=$enable_dlopen ++ ++# Whether dlopen of programs is supported. ++dlopen_self=$enable_dlopen_self ++ ++# Whether dlopen of statically linked programs is supported. ++dlopen_self_static=$enable_dlopen_self_static ++ ++# Compiler flag to prevent dynamic linking. ++link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1) ++ ++# Compiler flag to turn off builtin functions. ++no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) ++ ++# Compiler flag to allow reflexive dlopens. ++export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) ++ ++# Compiler flag to generate shared objects directly from archives. ++whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1) ++ ++# Compiler flag to generate thread-safe objects. ++thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1) ++ ++# Library versioning type. ++version_type=$version_type ++ ++# Format of library name prefix. ++libname_spec=$lt_libname_spec ++ ++# List of archive names. First name is the real one, the rest are links. ++# The last name is the one that the linker finds with -lNAME. ++library_names_spec=$lt_library_names_spec ++ ++# The coded name of the library, if different from the real name. ++soname_spec=$lt_soname_spec ++ ++# Commands used to build and install an old-style archive. ++RANLIB=$lt_RANLIB ++old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1) ++old_postinstall_cmds=$lt_old_postinstall_cmds ++old_postuninstall_cmds=$lt_old_postuninstall_cmds ++ ++# Create an old-style archive from a shared archive. ++old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) ++ ++# Create a temporary old-style archive to link instead of a shared archive. ++old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) ++ ++# Commands used to build and install a shared archive. ++archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1) ++archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1) ++postinstall_cmds=$lt_postinstall_cmds ++postuninstall_cmds=$lt_postuninstall_cmds ++ ++# Commands used to build a loadable module (assumed same as above if empty) ++module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1) ++module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1) ++ ++# Commands to strip libraries. ++old_striplib=$lt_old_striplib ++striplib=$lt_striplib ++ ++# Dependencies to place before the objects being linked to create a ++# shared library. ++predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1) ++ ++# Dependencies to place after the objects being linked to create a ++# shared library. ++postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1) ++ ++# Dependencies to place before the objects being linked to create a ++# shared library. ++predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1) ++ ++# Dependencies to place after the objects being linked to create a ++# shared library. ++postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) ++ ++# The library search path used internally by the compiler when linking ++# a shared library. ++compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) ++ ++# Method to check whether dependent libraries are shared objects. ++deplibs_check_method=$lt_deplibs_check_method ++ ++# Command to use when deplibs_check_method == file_magic. ++file_magic_cmd=$lt_file_magic_cmd ++ ++# Flag that allows shared libraries with undefined symbols to be built. ++allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1) ++ ++# Flag that forces no undefined symbols. ++no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1) ++ ++# Commands used to finish a libtool library installation in a directory. ++finish_cmds=$lt_finish_cmds ++ ++# Same as above, but a single script fragment to be evaled but not shown. ++finish_eval=$lt_finish_eval + +- osf4* | osf5*) # as osf3* with the addition of -msym flag +- if test "$GCC" = yes; then +- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' +- else +- allow_undefined_flag=' -expect_unresolved \*' +- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ +- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' ++# Take the output of nm and produce a listing of raw symbols and C names. ++global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +- #Both c and cxx compiler support -rpath directly +- hardcode_libdir_flag_spec='-rpath $libdir' +- fi +- hardcode_libdir_separator=: +- ;; ++# Transform the output of nm in a proper C declaration ++global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +- sco3.2v5*) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var=no +- runpath_var=LD_RUN_PATH +- hardcode_runpath_var=yes +- ;; ++# Transform the output of nm in a C name address pair ++global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +- solaris*) +- no_undefined_flag=' -z defs' +- # $CC -shared without GNU ld will not create a library from C++ +- # object files and a static libstdc++, better avoid it by now +- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' +- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +- hardcode_libdir_flag_spec='-R$libdir' +- hardcode_shlibpath_var=no +- case $host_os in +- [solaris2.[0-5] | solaris2.[0-5].*]) ;; +- *) # Supported since Solaris 2.6 (maybe 2.5.1?) +- whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; +- esac +- link_all_deplibs=yes +- ;; ++# This is the shared library runtime path variable. ++runpath_var=$runpath_var + +- sunos4*) +- if test "x$host_vendor" = xsequent; then +- # Use $CC to link under sequent, because it throws in some extra .o +- # files that make .init and .fini sections work. +- archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' +- fi +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_direct=yes +- hardcode_minus_L=yes +- hardcode_shlibpath_var=no +- ;; ++# This is the shared library path variable. ++shlibpath_var=$shlibpath_var + +- sysv4) +- if test "x$host_vendor" = xsno; then +- archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linkopts' +- hardcode_direct=yes # is this really true??? +- else +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct=no #Motorola manual says yes, but my tests say they lie +- fi +- runpath_var='LD_RUN_PATH' +- hardcode_shlibpath_var=no +- ;; ++# Is shlibpath searched before the hard-coded library search path? ++shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +- sysv4.3*) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var=no +- export_dynamic_flag_spec='-Bexport' +- ;; +- +- sysv5*) +- no_undefined_flag=' -z text' +- # $CC -shared without GNU ld will not create a library from C++ +- # object files and a static libstdc++, better avoid it by now +- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' +- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +- hardcode_libdir_flag_spec= +- hardcode_shlibpath_var=no +- runpath_var='LD_RUN_PATH' +- ;; ++# How to hardcode a shared library path into an executable. ++hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) + +- uts4*) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_shlibpath_var=no +- ;; ++# Whether we should hardcode library paths into libraries. ++hardcode_into_libs=$hardcode_into_libs + +- dgux*) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_shlibpath_var=no +- ;; ++# Flag to hardcode \$libdir into a binary during linking. ++# This must work even if \$libdir does not exist. ++hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) + +- sysv4*MP*) +- if test -d /usr/nec; then +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var=no +- runpath_var=LD_RUN_PATH +- hardcode_runpath_var=yes +- ld_shlibs=yes +- fi +- ;; ++# If ld is used when linking, flag to hardcode \$libdir into ++# a binary during linking. This must work even if \$libdir does ++# not exist. ++hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) + +- sysv4.2uw2*) +- archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct=yes +- hardcode_minus_L=no +- hardcode_shlibpath_var=no +- hardcode_runpath_var=yes +- runpath_var=LD_RUN_PATH +- ;; ++# Whether we need a single -rpath flag with a separated argument. ++hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) + +- sysv5uw7* | unixware7*) +- no_undefined_flag='${wl}-z ${wl}text' +- if test "$GCC" = yes; then +- archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- fi +- runpath_var='LD_RUN_PATH' +- hardcode_shlibpath_var=no +- ;; ++# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the ++# resulting binary. ++hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1) + +- *) +- ld_shlibs=no +- ;; +- esac +-fi +-AC_MSG_RESULT([$ld_shlibs]) +-test "$ld_shlibs" = no && can_build_shared=no ++# Set to yes if using the -LDIR flag during linking hardcodes DIR into the ++# resulting binary. ++hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1) + +-# Check hardcoding attributes. +-AC_MSG_CHECKING([how to hardcode library paths into programs]) +-hardcode_action= +-if test -n "$hardcode_libdir_flag_spec" || \ +- test -n "$runpath_var"; then ++# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into ++# the resulting binary. ++hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1) + +- # We can hardcode non-existant directories. +- if test "$hardcode_direct" != no && +- # If the only mechanism to avoid hardcoding is shlibpath_var, we +- # have to relink, otherwise we might link with an installed library +- # when we should be linking with a yet-to-be-installed one +- ## test "$hardcode_shlibpath_var" != no && +- test "$hardcode_minus_L" != no; then +- # Linking always hardcodes the temporary library directory. +- hardcode_action=relink +- else +- # We can link without hardcoding, and we can hardcode nonexisting dirs. +- hardcode_action=immediate +- fi +-else +- # We cannot hardcode anything, or else we can only hardcode existing +- # directories. +- hardcode_action=unsupported +-fi +-AC_MSG_RESULT([$hardcode_action]) ++# Set to yes if building a shared library automatically hardcodes DIR into the library ++# and all subsequent libraries and executables linked against it. ++hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1) + +-striplib= +-old_striplib= +-AC_MSG_CHECKING([whether stripping libraries is possible]) +-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then +- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" +- test -z "$striplib" && striplib="$STRIP --strip-unneeded" +- AC_MSG_RESULT([yes]) +-else +- AC_MSG_RESULT([no]) +-fi ++# Variables whose values should be saved in libtool wrapper scripts and ++# restored at relink time. ++variables_saved_for_relink="$variables_saved_for_relink" + +-reload_cmds='$LD$reload_flag -o $output$reload_objs' +-test -z "$deplibs_check_method" && deplibs_check_method=unknown ++# Whether libtool must link a program against all its dependency libraries. ++link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) + +-# PORTME Fill in your ld.so characteristics +-AC_MSG_CHECKING([dynamic linker characteristics]) +-library_names_spec= +-libname_spec='lib$name' +-soname_spec= +-postinstall_cmds= +-postuninstall_cmds= +-finish_cmds= +-finish_eval= +-shlibpath_var= +-shlibpath_overrides_runpath=unknown +-version_type=none +-dynamic_linker="$host_os ld.so" +-sys_lib_dlsearch_path_spec="/lib /usr/lib" +-sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" ++# Compile-time system search path for libraries ++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +-case $host_os in +-aix3*) +- version_type=linux +- library_names_spec='${libname}${release}.so$versuffix $libname.a' +- shlibpath_var=LIBPATH ++# Run-time system search path for libraries ++sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +- # AIX has no versioning support, so we append a major version to the name. +- soname_spec='${libname}${release}.so$major' +- ;; ++# Fix the shell variable \$srcfile for the compiler. ++fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)" + +-aix4* | aix5*) +- version_type=linux +- if test "$host_cpu" = ia64; then +- # AIX 5 supports IA64 +- library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' +- shlibpath_var=LD_LIBRARY_PATH +- else +- # With GCC up to 2.95.x, collect2 would create an import file +- # for dependence libraries. The import file would start with +- # the line `#! .'. This would cause the generated library to +- # depend on `.', always an invalid library. This was fixed in +- # development snapshots of GCC prior to 3.0. +- case $host_os in +- [ aix4 | aix4.[01] | aix4.[01].*)] +- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' +- echo ' yes ' +- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then +- : +- else +- can_build_shared=no +- fi +- ;; +- esac +- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct +- # soname into executable. Probably we can add versioning support to +- # collect2, so additional links can be useful in future. +- if test "$aix_use_runtimelinking" = yes; then +- # If using run time linking (on AIX 4.2 or later) use lib.so instead of +- # lib.a to let people know that these are not typical AIX shared libraries. +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' +- else +- # We preserve .a as extension for shared libraries through AIX4.2 +- # and later when we are not doing run time linking. +- library_names_spec='${libname}${release}.a $libname.a' +- soname_spec='${libname}${release}.so$major' +- fi +- shlibpath_var=LIBPATH +- deplibs_check_method=pass_all +- fi +- ;; ++# Set to yes if exported symbols are required. ++always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) + +-amigaos*) +- library_names_spec='$libname.ixlibrary $libname.a' +- # Create ${libname}_ixlibrary.a entries in /sys/libs. +- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | [$Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\'']`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' +- ;; ++# The commands to list exported symbols. ++export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1) + +-beos*) +- library_names_spec='${libname}.so' +- dynamic_linker="$host_os ld.so" +- shlibpath_var=LIBRARY_PATH +- ;; ++# The commands to extract the exported symbol list from a shared archive. ++extract_expsyms_cmds=$lt_extract_expsyms_cmds + +-bsdi4*) +- version_type=linux +- need_version=no +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' +- soname_spec='${libname}${release}.so$major' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" +- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" +- export_dynamic_flag_spec=-rdynamic +- # the default ld.so.conf also contains /usr/contrib/lib and +- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow +- # libtool to hard-code these into programs +- ;; ++# Symbols that should not be listed in the preloaded symbols. ++exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1) + +-cygwin* | mingw* | pw32*) +- version_type=windows +- need_version=no +- need_lib_prefix=no +- case $GCC,$host_os in +- yes,cygwin*) +- library_names_spec='$libname.dll.a' +- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | [sed -e 's/[.]/-/g']`${versuffix}.dll' +- postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ +- dldir=$destdir/`dirname \$dlpath`~ +- test -d \$dldir || mkdir -p \$dldir~ +- $install_prog .libs/$dlname \$dldir/$dlname' +- postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ +- dlpath=$dir/\$dldll~ +- $rm \$dlpath' +- ;; +- yes,mingw*) +- library_names_spec='${libname}`echo ${release} | [sed -e 's/[.]/-/g']`${versuffix}.dll' +- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"` +- ;; +- yes,pw32*) +- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' +- ;; +- *) +- library_names_spec='${libname}`echo ${release} | [sed -e 's/[.]/-/g']`${versuffix}.dll $libname.lib' +- ;; +- esac +- dynamic_linker='Win32 ld.exe' +- # FIXME: first we should search . and the directory the executable is in +- shlibpath_var=PATH +- ;; ++# Symbols that must always be exported. ++include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1) + +-darwin* | rhapsody*) +- dynamic_linker="$host_os dyld" +- version_type=darwin +- need_lib_prefix=no +- need_version=no +- # FIXME: Relying on posixy $() will cause problems for +- # cross-compilation, but unfortunately the echo tests do not +- # yet detect zsh echo's removal of \ escapes. +- library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' +- soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' +- shlibpath_overrides_runpath=yes +- shlibpath_var=DYLD_LIBRARY_PATH +- ;; ++ifelse([$1],[], ++[# ### END LIBTOOL CONFIG], ++[# ### END LIBTOOL TAG CONFIG: $tagname]) + +-freebsd1*) +- dynamic_linker=no +- ;; ++__EOF__ + +-freebsd*) +- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` +- version_type=freebsd-$objformat +- case $version_type in +- freebsd-elf*) +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' +- need_version=no +- need_lib_prefix=no +- ;; +- freebsd-*) +- library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' +- need_version=yes +- ;; +- esac +- shlibpath_var=LD_LIBRARY_PATH ++ifelse([$1],[], [ + case $host_os in +- freebsd2*) +- shlibpath_overrides_runpath=yes +- ;; +- *) +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes ++ aix3*) ++ cat <<\EOF >> "$cfgfile" ++ ++# AIX sometimes has problems with the GCC collect2 program. For some ++# reason, if we set the COLLECT_NAMES environment variable, the problems ++# vanish in a puff of smoke. ++if test "X${COLLECT_NAMES+set}" != Xset; then ++ COLLECT_NAMES= ++ export COLLECT_NAMES ++fi ++EOF + ;; + esac +- ;; + +-gnu*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' +- soname_spec='${libname}${release}.so$major' +- shlibpath_var=LD_LIBRARY_PATH +- hardcode_into_libs=yes +- ;; ++ # We use sed instead of cat because bash on DJGPP gets confused if ++ # if finds mixed CR/LF and LF-only lines. Since sed operates in ++ # text mode, it properly converts lines to CR/LF. This bash problem ++ # is reportedly fixed, but why not run on old versions too? ++ sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) + +-hpux9* | hpux10* | hpux11*) +- # Give a soname corresponding to the major version so that dld.sl refuses to +- # link against other versions. +- dynamic_linker="$host_os dld.sl" +- version_type=sunos +- need_lib_prefix=no +- need_version=no +- shlibpath_var=SHLIB_PATH +- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH +- library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' +- soname_spec='${libname}${release}.sl$major' +- # HP-UX runs *really* slowly unless shared libraries are mode 555. +- postinstall_cmds='chmod 555 $lib' +- ;; ++ mv -f "$cfgfile" "$ofile" || \ ++ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") ++ chmod +x "$ofile" ++]) ++else ++ # If there is no Makefile yet, we rely on a make rule to execute ++ # `config.status --recheck' to rerun these tests and create the ++ # libtool script then. ++ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` ++ if test -f "$ltmain_in"; then ++ test -f Makefile && make "$ltmain" ++ fi ++fi ++])# AC_LIBTOOL_CONFIG ++ ++ ++# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME]) ++# ------------------------------------------- ++AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], ++[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl ++ ++_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= ++ ++if test "$GCC" = yes; then ++ _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ++ ++ AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], ++ lt_cv_prog_compiler_rtti_exceptions, ++ [-fno-rtti -fno-exceptions], [], ++ [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) ++fi ++])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI + +-irix5* | irix6*) +- version_type=irix +- need_lib_prefix=no +- need_version=no +- soname_spec='${libname}${release}.so$major' +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' +- case $host_os in +- irix5*) +- libsuff= shlibsuff= +- ;; +- *) +- case $LD in # libtool.m4 will add one of these switches to LD +- *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; +- *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; +- *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; +- *) libsuff= shlibsuff= libmagic=never-match;; +- esac +- ;; +- esac +- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" +- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" +- ;; + +-# No shared lib support for Linux oldld, aout, or coff. +-linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) +- dynamic_linker=no +- ;; ++# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE ++# --------------------------------- ++AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], ++[AC_REQUIRE([AC_CANONICAL_HOST]) ++AC_REQUIRE([AC_PROG_NM]) ++AC_REQUIRE([AC_OBJEXT]) ++# Check for command to grab the raw symbol name followed by C symbol from nm. ++AC_MSG_CHECKING([command to parse $NM output from $compiler object]) ++AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], ++[ ++# These are sane defaults that work on at least a few old systems. ++# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +-# This must be Linux ELF. +-linux-gnu*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' +- soname_spec='${libname}${release}.so$major' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- # This implies no fast_install, which is unacceptable. +- # Some rework will be needed to allow for fast_install +- # before this can be enabled. +- hardcode_into_libs=yes ++# Character class describing NM global symbol codes. ++symcode='[[BCDEGRST]]' + +- # We used to test for /lib/ld.so.1 and disable shared libraries on +- # powerpc, because MkLinux only supported shared libraries with the +- # GNU dynamic linker. Since this was broken with cross compilers, +- # most powerpc-linux boxes support dynamic linking these days and +- # people can always --disable-shared, the test was removed, and we +- # assume the GNU/Linux dynamic linker is in use. +- dynamic_linker='GNU/Linux ld.so' +- ;; ++# Regexp to match symbols that can be accessed directly from C. ++sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' + +-netbsd*) +- version_type=sunos +- need_lib_prefix=no +- need_version=no +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- dynamic_linker='NetBSD (a.out) ld.so' +- else +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' +- soname_spec='${libname}${release}.so$major' +- dynamic_linker='NetBSD ld.elf_so' +- fi +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; ++# Transform an extracted symbol line into a proper C declaration ++lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" + +-newsos6) +- version_type=linux +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- ;; ++# Transform an extracted symbol line into symbol name and symbol address ++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + +-openbsd*) +- version_type=sunos +- if test "$with_gnu_ld" = yes; then +- need_lib_prefix=no +- need_version=no ++# Define system-specific variables. ++case $host_os in ++aix*) ++ symcode='[[BCDT]]' ++ ;; ++cygwin* | mingw* | pw32*) ++ symcode='[[ABCDGISTW]]' ++ ;; ++hpux*) # Its linker distinguishes data from code symbols ++ if test "$host_cpu" = ia64; then ++ symcode='[[ABCDEGRST]]' + fi +- library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- shlibpath_var=LD_LIBRARY_PATH ++ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" ++ lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + ;; +- +-os2*) +- libname_spec='$name' +- need_lib_prefix=no +- library_names_spec='$libname.dll $libname.a' +- dynamic_linker='OS/2 ld.exe' +- shlibpath_var=LIBPATH ++linux* | k*bsd*-gnu) ++ if test "$host_cpu" = ia64; then ++ symcode='[[ABCDGIRSTW]]' ++ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" ++ lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ++ fi + ;; +- +-osf3* | osf4* | osf5*) +- version_type=osf +- need_version=no +- soname_spec='${libname}${release}.so' +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' +- shlibpath_var=LD_LIBRARY_PATH +- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" +- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ++irix* | nonstopux*) ++ symcode='[[BCDEGRST]]' + ;; +- +-sco3.2v5*) +- version_type=osf +- soname_spec='${libname}${release}.so$major' +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' +- shlibpath_var=LD_LIBRARY_PATH ++osf*) ++ symcode='[[BCDEGQRST]]' + ;; +- + solaris*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' +- soname_spec='${libname}${release}.so$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- # ldd complains unless libraries are executable +- postinstall_cmds='chmod +x $lib' ++ symcode='[[BDRT]]' + ;; +- +-sunos4*) +- version_type=sunos +- library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' +- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- if test "$with_gnu_ld" = yes; then +- need_lib_prefix=no +- fi +- need_version=yes ++sco3.2v5*) ++ symcode='[[DT]]' + ;; +- +-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) +- version_type=linux +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' +- soname_spec='${libname}${release}.so$major' +- shlibpath_var=LD_LIBRARY_PATH +- case $host_vendor in +- sni) +- shlibpath_overrides_runpath=no +- ;; +- motorola) +- need_lib_prefix=no +- need_version=no +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' +- ;; +- esac ++sysv4.2uw2*) ++ symcode='[[DT]]' + ;; +- +-uts4*) +- version_type=linux +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' +- soname_spec='${libname}${release}.so$major' +- shlibpath_var=LD_LIBRARY_PATH ++sysv5* | sco5v6* | unixware* | OpenUNIX*) ++ symcode='[[ABDT]]' + ;; +- +-dgux*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' +- soname_spec='${libname}${release}.so$major' +- shlibpath_var=LD_LIBRARY_PATH ++sysv4) ++ symcode='[[DFNSTU]]' + ;; ++esac + +-sysv4*MP*) +- if test -d /usr/nec ;then +- version_type=linux +- library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' +- soname_spec='$libname.so.$major' +- shlibpath_var=LD_LIBRARY_PATH +- fi ++# Handle CRLF in mingw tool chain ++opt_cr= ++case $build_os in ++mingw*) ++ opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; ++esac + +-*) +- dynamic_linker=no +- ;; ++# If we're using GNU nm, then use its standard symbol codes. ++case `$NM -V 2>&1` in ++*GNU* | *'with BFD'*) ++ symcode='[[ABCDGIRSTW]]' ;; + esac +-AC_MSG_RESULT([$dynamic_linker]) +-test "$dynamic_linker" = no && can_build_shared=no + +-# Report the final consequences. +-AC_MSG_CHECKING([if libtool supports shared libraries]) +-AC_MSG_RESULT([$can_build_shared]) ++# Try without a prefix undercore, then with it. ++for ac_symprfx in "" "_"; do + +-if test "$hardcode_action" = relink; then +- # Fast installation is not supported +- enable_fast_install=no +-elif test "$shlibpath_overrides_runpath" = yes || +- test "$enable_shared" = no; then +- # Fast installation is not necessary +- enable_fast_install=needless +-fi ++ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. ++ symxfrm="\\1 $ac_symprfx\\2 \\2" + +-variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +-if test "$GCC" = yes; then +- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +-fi ++ # Write the raw and C identifiers. ++ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + +-AC_LIBTOOL_DLOPEN_SELF ++ # Check to see that the pipe works correctly. ++ pipe_works=no ++ ++ rm -f conftest* ++ cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then ++ # Try sorting and uniquifying the output. ++ if sort "$nlist" | uniq > "$nlist"T; then ++ mv -f "$nlist"T "$nlist" ++ else ++ rm -f "$nlist"T ++ fi ++ ++ # Make sure that we snagged all the symbols we need. ++ if grep ' nm_test_var$' "$nlist" >/dev/null; then ++ if grep ' nm_test_func$' "$nlist" >/dev/null; then ++ cat < conftest.$ac_ext ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++EOF ++ # Now generate the symbol file. ++ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' ++ ++ cat <> conftest.$ac_ext ++#if defined (__STDC__) && __STDC__ ++# define lt_ptr_t void * ++#else ++# define lt_ptr_t char * ++# define const ++#endif ++ ++/* The mapping between symbol names and symbols. */ ++const struct { ++ const char *name; ++ lt_ptr_t address; ++} ++lt_preloaded_symbols[[]] = ++{ ++EOF ++ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext ++ cat <<\EOF >> conftest.$ac_ext ++ {0, (lt_ptr_t) 0} ++}; + +-if test "$enable_shared" = yes && test "$GCC" = yes; then +- case $archive_cmds in +- *'~'*) +- # FIXME: we may have to deal with multi-command sequences. +- ;; +- '$CC '*) +- # Test whether the compiler implicitly links with -lc since on some +- # systems, -lgcc has to come before -lc. If gcc already passes -lc +- # to ld, don't add -lc before -lgcc. +- AC_MSG_CHECKING([whether -lc should be explicitly linked in]) +- AC_CACHE_VAL([lt_cv_archive_cmds_need_lc], +- [$rm conftest* +- echo 'static int dummy;' > conftest.$ac_ext +- +- if AC_TRY_EVAL(ac_compile); then +- soname=conftest +- lib=conftest +- libobjs=conftest.$ac_objext +- deplibs= +- wl=$lt_cv_prog_cc_wl +- compiler_flags=-v +- linker_flags=-v +- verstring= +- output_objdir=. +- libname=conftest +- save_allow_undefined_flag=$allow_undefined_flag +- allow_undefined_flag= +- if AC_TRY_EVAL(archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) +- then +- lt_cv_archive_cmds_need_lc=no ++#ifdef __cplusplus ++} ++#endif ++EOF ++ # Now try linking the two files. ++ mv conftest.$ac_objext conftstm.$ac_objext ++ lt_save_LIBS="$LIBS" ++ lt_save_CFLAGS="$CFLAGS" ++ LIBS="conftstm.$ac_objext" ++ CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" ++ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then ++ pipe_works=yes ++ fi ++ LIBS="$lt_save_LIBS" ++ CFLAGS="$lt_save_CFLAGS" ++ else ++ echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD ++ fi + else +- lt_cv_archive_cmds_need_lc=yes ++ echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD + fi +- allow_undefined_flag=$save_allow_undefined_flag + else +- cat conftest.err 1>&5 +- fi]) +- AC_MSG_RESULT([$lt_cv_archive_cmds_need_lc]) +- ;; +- esac +-fi +-need_lc=${lt_cv_archive_cmds_need_lc-yes} ++ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD ++ fi ++ else ++ echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD ++ cat conftest.$ac_ext >&5 ++ fi ++ rm -f conftest* conftst* + +-# The second clause should only fire when bootstrapping the +-# libtool distribution, otherwise you forgot to ship ltmain.sh +-# with your package, and you will get complaints that there are +-# no rules to generate ltmain.sh. +-if test -f "$ltmain"; then +- : ++ # Do not use the global_symbol_pipe unless it works. ++ if test "$pipe_works" = yes; then ++ break ++ else ++ lt_cv_sys_global_symbol_pipe= ++ fi ++done ++]) ++if test -z "$lt_cv_sys_global_symbol_pipe"; then ++ lt_cv_sys_global_symbol_to_cdecl= ++fi ++if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then ++ AC_MSG_RESULT(failed) + else +- # If there is no Makefile yet, we rely on a make rule to execute +- # `config.status --recheck' to rerun these tests and create the +- # libtool script then. +- test -f Makefile && make "$ltmain" ++ AC_MSG_RESULT(ok) + fi ++]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE + +-if test -f "$ltmain"; then +- trap "$rm \"${ofile}T\"; exit 1" 1 2 15 +- $rm -f "${ofile}T" + +- echo creating $ofile ++# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME]) ++# --------------------------------------- ++AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], ++[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)= ++_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= ++_LT_AC_TAGVAR(lt_prog_compiler_static, $1)= + +- # Now quote all the things that may contain metacharacters while being +- # careful not to overquote the AC_SUBSTed values. We take copies of the +- # variables and quote the copies for generation of the libtool script. +- for var in echo old_CC old_CFLAGS \ +- AR AR_FLAGS CC LD LN_S NM SHELL \ +- reload_flag reload_cmds wl \ +- pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ +- thread_safe_flag_spec whole_archive_flag_spec libname_spec \ +- library_names_spec soname_spec \ +- RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ +- old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \ +- postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \ +- old_striplib striplib file_magic_cmd export_symbols_cmds \ +- deplibs_check_method allow_undefined_flag no_undefined_flag \ +- finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ +- hardcode_libdir_flag_spec hardcode_libdir_separator \ +- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ +- compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do ++AC_MSG_CHECKING([for $compiler option to produce PIC]) ++ ifelse([$1],[CXX],[ ++ # C++ specific cases for pic, static, wl, etc. ++ if test "$GXX" = yes; then ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + +- case $var in +- reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ +- old_postinstall_cmds | old_postuninstall_cmds | \ +- export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ +- extract_expsyms_cmds | old_archive_from_expsyms_cmds | \ +- postinstall_cmds | postuninstall_cmds | \ +- finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) +- # Double-quote double-evaled strings. +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ++ case $host_os in ++ aix*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ fi ++ ;; ++ amigaos*) ++ # FIXME: we need at least 68020 code to build shared libraries, but ++ # adding the `-m68020' flag to GCC prevents building anything better, ++ # like `-m68040'. ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ++ ;; ++ beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ # PIC is the default for these OSes. ++ ;; ++ mingw* | os2* | pw32*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' ++ ;; ++ darwin* | rhapsody*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ++ ;; ++ *djgpp*) ++ # DJGPP does not support shared libraries at all ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= ++ ;; ++ interix3*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic ++ fi ++ ;; ++ hpux*) ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ ;; ++ *) ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ esac + ;; + *) +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac +- done ++ else ++ case $host_os in ++ aix4* | aix5*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ else ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' ++ fi ++ ;; ++ chorus*) ++ case $cc_basename in ++ cxch68*) ++ # Green Hills C++ Compiler ++ # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ++ ;; ++ esac ++ ;; ++ darwin*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ case $cc_basename in ++ xlc*) ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ ;; ++ esac ++ ;; ++ dgux*) ++ case $cc_basename in ++ ec++*) ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ ;; ++ ghcx*) ++ # Green Hills C++ Compiler ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ freebsd* | dragonfly*) ++ # FreeBSD uses GNU C++ ++ ;; ++ hpux9* | hpux10* | hpux11*) ++ case $cc_basename in ++ CC*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ++ if test "$host_cpu" != ia64; then ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ++ fi ++ ;; ++ aCC*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ++ ;; ++ esac ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ interix*) ++ # This is c89, which is MS Visual C++ (no shared libs) ++ # Anyone wants to do a port? ++ ;; ++ irix5* | irix6* | nonstopux*) ++ case $cc_basename in ++ CC*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ # CC pic flag -KPIC is the default. ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ linux* | k*bsd*-gnu) ++ case $cc_basename in ++ KCC*) ++ # KAI C++ Compiler ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ icpc* | ecpc*) ++ # Intel C++ ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' ++ ;; ++ pgCC*) ++ # Portland Group C++ compiler. ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ cxx*) ++ # Compaq C++ ++ # Make sure the PIC flag is empty. It appears that all Alpha ++ # Linux and Compaq Tru64 Unix objects are PIC. ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ lynxos*) ++ ;; ++ m88k*) ++ ;; ++ mvs*) ++ case $cc_basename in ++ cxx*) ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ netbsd* | netbsdelf*-gnu) ++ ;; ++ osf3* | osf4* | osf5*) ++ case $cc_basename in ++ KCC*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' ++ ;; ++ RCC*) ++ # Rational C++ 2.4.1 ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ ;; ++ cxx*) ++ # Digital/Compaq C++ ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # Make sure the PIC flag is empty. It appears that all Alpha ++ # Linux and Compaq Tru64 Unix objects are PIC. ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ psos*) ++ ;; ++ solaris*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.2, 5.x and Centerline C++ ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ++ ;; ++ gcx*) ++ # Green Hills C++ Compiler ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ sunos4*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.x ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ lcc*) ++ # Lucid ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ tandem*) ++ case $cc_basename in ++ NCC*) ++ # NonStop-UX NCC 3.20 ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ case $cc_basename in ++ CC*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ esac ++ ;; ++ vxworks*) ++ ;; ++ *) ++ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ++ ;; ++ esac ++ fi ++], ++[ ++ if test "$GCC" = yes; then ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + +- cat <<__EOF__ > "${ofile}T" +-#! $SHELL ++ case $host_os in ++ aix*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ fi ++ ;; + +-# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +-# NOTE: Changes made to this file will be lost: look at ltmain.sh. +-# +-# Copyright (C) 1996-2000 Free Software Foundation, Inc. +-# Originally by Gordon Matzigkeit , 1996 +-# +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2 of the License, or +-# (at your option) any later version. +-# +-# This program is distributed in the hope that it will be useful, but +-# WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +-# General Public License for more details. +-# +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +-# +-# As a special exception to the GNU General Public License, if you +-# distribute this file as part of a program that contains a +-# configuration script generated by Autoconf, you may include it under +-# the same distribution terms that you use for the rest of that program. ++ amigaos*) ++ # FIXME: we need at least 68020 code to build shared libraries, but ++ # adding the `-m68020' flag to GCC prevents building anything better, ++ # like `-m68040'. ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ++ ;; + +-# Sed that helps us avoid accidentally triggering echo(1) options like -n. +-Xsed="sed -e s/^X//" ++ beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ # PIC is the default for these OSes. ++ ;; + +-# The HP-UX ksh and POSIX shell print the target directory to stdout +-# if CDPATH is set. +-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi ++ mingw* | pw32* | os2*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' ++ ;; + +-# ### BEGIN LIBTOOL CONFIG ++ darwin* | rhapsody*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ++ ;; + +-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: ++ interix3*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; + +-# Shell to use when invoking shell scripts. +-SHELL=$lt_SHELL ++ msdosdjgpp*) ++ # Just because we use GCC doesn't mean we suddenly get shared libraries ++ # on systems that don't support them. ++ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ++ enable_shared=no ++ ;; + +-# Whether or not to build shared libraries. +-build_libtool_libs=$enable_shared ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic ++ fi ++ ;; + +-# Whether or not to add -lc for building shared libraries. +-build_libtool_need_lc=$need_lc ++ hpux*) ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ esac ++ ;; + +-# Whether or not to build static libraries. +-build_old_libs=$enable_static ++ *) ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ esac ++ else ++ # PORTME Check for flag to pass linker flags through the system compiler. ++ case $host_os in ++ aix*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ else ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' ++ fi ++ ;; ++ darwin*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ case $cc_basename in ++ xlc*) ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ ;; ++ esac ++ ;; + +-# Whether or not to optimize for fast installation. +-fast_install=$enable_fast_install ++ mingw* | pw32* | os2*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' ++ ;; + +-# The host system. +-host_alias=$host_alias +-host=$host ++ hpux9* | hpux10* | hpux11*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ++ ;; ++ esac ++ # Is there a better lt_prog_compiler_static that works with the bundled CC? ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ++ ;; + +-# An echo program that does not interpret backslashes. +-echo=$lt_echo ++ irix5* | irix6* | nonstopux*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # PIC (with -KPIC) is the default. ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; + +-# The archiver. +-AR=$lt_AR +-AR_FLAGS=$lt_AR_FLAGS ++ newsos6) ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; + +-# The default C compiler. +-CC=$lt_CC ++ linux* | k*bsd*-gnu) ++ case $cc_basename in ++ icc* | ecc*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' ++ ;; ++ pgcc* | pgf77* | pgf90* | pgf95*) ++ # Portland Group compilers (*not* the Pentium gcc compiler, ++ # which looks to be a dead project) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ ccc*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # All Alpha code is PIC. ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ esac ++ ;; + +-# Is the compiler the GNU C compiler? +-with_gcc=$GCC ++ osf3* | osf4* | osf5*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # All OSF/1 code is PIC. ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; + +-# The linker used to build libraries. +-LD=$lt_LD ++ solaris*) ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ case $cc_basename in ++ f77* | f90* | f95*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; ++ *) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; ++ esac ++ ;; + +-# Whether we need hard or soft links. +-LN_S=$lt_LN_S ++ sunos4*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; + +-# A BSD-compatible nm program. +-NM=$lt_NM ++ sysv4 | sysv4.2uw2* | sysv4.3*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; + +-# A symbol stripping program +-STRIP=$STRIP ++ sysv4*MP*) ++ if test -d /usr/nec ;then ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ fi ++ ;; + +-# Used to examine libraries when file_magic_cmd begins "file" +-MAGIC_CMD=$MAGIC_CMD ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; + +-# Used on cygwin: DLL creation program. +-DLLTOOL="$DLLTOOL" ++ unicos*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ++ ;; + +-# Used on cygwin: object dumper. +-OBJDUMP="$OBJDUMP" ++ uts4*) ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; + +-# Used on cygwin: assembler. +-AS="$AS" ++ *) ++ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ++ ;; ++ esac ++ fi ++]) ++AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) + +-# The name of the directory that contains temporary libtool files. +-objdir=$objdir ++# ++# Check to make sure the PIC flag actually works. ++# ++if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then ++ AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], ++ _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1), ++ [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [], ++ [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in ++ "" | " "*) ;; ++ *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; ++ esac], ++ [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= ++ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) ++fi ++case $host_os in ++ # For platforms which do not support PIC, -DPIC is meaningless: ++ *djgpp*) ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= ++ ;; ++ *) ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" ++ ;; ++esac + +-# How to create reloadable object files. +-reload_flag=$lt_reload_flag +-reload_cmds=$lt_reload_cmds ++# ++# Check to make sure the static flag actually works. ++# ++wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\" ++AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], ++ _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1), ++ $lt_tmp_static_flag, ++ [], ++ [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) ++]) + +-# How to pass a linker flag through the compiler. +-wl=$lt_wl + +-# Object file suffix (normally "o"). +-objext="$ac_objext" ++# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) ++# ------------------------------------ ++# See if the linker supports building shared libraries. ++AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], ++[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) ++ifelse([$1],[CXX],[ ++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ case $host_os in ++ aix4* | aix5*) ++ # If we're using GNU nm, then we don't want the "-C" option. ++ # -C means demangle to AIX nm, but means don't demangle with GNU nm ++ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then ++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' ++ else ++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' ++ fi ++ ;; ++ pw32*) ++ _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" ++ ;; ++ cygwin* | mingw*) ++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' ++ ;; ++ linux* | k*bsd*-gnu) ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=no ++ ;; ++ *) ++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ ;; ++ esac ++],[ ++ runpath_var= ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)= ++ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no ++ _LT_AC_TAGVAR(archive_cmds, $1)= ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)= ++ _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= ++ _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= ++ _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= ++ _LT_AC_TAGVAR(hardcode_direct, $1)=no ++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=no ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown ++ _LT_AC_TAGVAR(hardcode_automatic, $1)=no ++ _LT_AC_TAGVAR(module_cmds, $1)= ++ _LT_AC_TAGVAR(module_expsym_cmds, $1)= ++ _LT_AC_TAGVAR(always_export_symbols, $1)=no ++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ # include_expsyms should be a list of space-separated symbols to be *always* ++ # included in the symbol list ++ _LT_AC_TAGVAR(include_expsyms, $1)= ++ # exclude_expsyms can be an extended regexp of symbols to exclude ++ # it will be wrapped by ` (' and `)$', so one must not match beginning or ++ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', ++ # as well as any symbol that contains `d'. ++ _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_" ++ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out ++ # platforms (ab)use it in PIC code, but their linkers get confused if ++ # the symbol is explicitly referenced. Since portable code cannot ++ # rely on this symbol name, it's probably fine to never include it in ++ # preloaded symbol tables. ++ extract_expsyms_cmds= ++ # Just being paranoid about ensuring that cc_basename is set. ++ _LT_CC_BASENAME([$compiler]) ++ case $host_os in ++ cygwin* | mingw* | pw32*) ++ # FIXME: the MSVC++ port hasn't been tested in a loooong time ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ if test "$GCC" != yes; then ++ with_gnu_ld=no ++ fi ++ ;; ++ interix*) ++ # we just hope/assume this is gcc and not c89 (= MSVC++) ++ with_gnu_ld=yes ++ ;; ++ openbsd*) ++ with_gnu_ld=no ++ ;; ++ esac + +-# Old archive suffix (normally "a"). +-libext="$libext" ++ _LT_AC_TAGVAR(ld_shlibs, $1)=yes ++ if test "$with_gnu_ld" = yes; then ++ # If archive_cmds runs LD, not CC, wlarc should be empty ++ wlarc='${wl}' + +-# Executable file suffix (normally ""). +-exeext="$exeext" ++ # Set some defaults for GNU ld with shared library support. These ++ # are reset later if shared libraries are not supported. Putting them ++ # here allows them to be overridden if necessary. ++ runpath_var=LD_RUN_PATH ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= ++ fi ++ supports_anon_versioning=no ++ case `$LD -v 2>/dev/null` in ++ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 ++ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... ++ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... ++ *\ 2.11.*) ;; # other 2.11 versions ++ *) supports_anon_versioning=yes ;; ++ esac + +-# Additional compiler flags for building library objects. +-pic_flag=$lt_pic_flag +-pic_mode=$pic_mode ++ # See if GNU ld supports shared libraries. ++ case $host_os in ++ aix3* | aix4* | aix5*) ++ # On AIX/PPC, the GNU linker is very broken ++ if test "$host_cpu" != ia64; then ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ cat <&2 + +-# Does compiler simultaneously support -c and -o options? +-compiler_c_o=$lt_compiler_c_o ++*** Warning: the GNU linker, at least up to release 2.9.1, is reported ++*** to be unable to reliably create shared libraries on AIX. ++*** Therefore, libtool is disabling shared libraries support. If you ++*** really care for shared libraries, you may want to modify your PATH ++*** so that a non-GNU linker is found, and then restart. + +-# Can we write directly to a .lo ? +-compiler_o_lo=$lt_compiler_o_lo ++EOF ++ fi ++ ;; + +-# Must we lock files when doing compilation ? +-need_locks=$lt_need_locks ++ amigaos*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes ++ ++ # Samuel A. Falvo II reports ++ # that the semantics of dynamic libraries on AmigaOS, at least up ++ # to version 4, is to share data among multiple programs linked ++ # with the same dynamic library. Since this doesn't match the ++ # behavior of shared libraries on other platforms, we can't use ++ # them. ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; + +-# Do we need the lib prefix for modules? +-need_lib_prefix=$need_lib_prefix ++ beos*) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ else ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; + +-# Do we need a version for libraries? +-need_version=$need_version ++ cygwin* | mingw* | pw32*) ++ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, ++ # as there is no search path for DLLs. ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported ++ _LT_AC_TAGVAR(always_export_symbols, $1)=no ++ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' ++ ++ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ # If the export-symbols file already is a .def file (1st line ++ # is EXPORTS), use it as is; otherwise, prepend... ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ cp $export_symbols $output_objdir/$soname.def; ++ else ++ echo EXPORTS > $output_objdir/$soname.def; ++ cat $export_symbols >> $output_objdir/$soname.def; ++ fi~ ++ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; + +-# Whether dlopen is supported. +-dlopen_support=$enable_dlopen ++ interix3*) ++ _LT_AC_TAGVAR(hardcode_direct, $1)=no ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; + +-# Whether dlopen of programs is supported. +-dlopen_self=$enable_dlopen_self ++ linux* | k*bsd*-gnu) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ tmp_addflag= ++ case $cc_basename,$host_cpu in ++ pgcc*) # Portland Group C compiler ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag' ++ ;; ++ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag -Mnomain' ;; ++ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 ++ tmp_addflag=' -i_dynamic' ;; ++ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 ++ tmp_addflag=' -i_dynamic -nofor_main' ;; ++ ifc* | ifort*) # Intel Fortran compiler ++ tmp_addflag=' -nofor_main' ;; ++ esac ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + +-# Whether dlopen of statically linked programs is supported. +-dlopen_self_static=$enable_dlopen_self_static ++ if test $supports_anon_versioning = yes; then ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ $echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' ++ fi ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=no ++ else ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; + +-# Compiler flag to prevent dynamic linking. +-link_static_flag=$lt_link_static_flag ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' ++ wlarc= ++ else ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ fi ++ ;; + +-# Compiler flag to turn off builtin functions. +-no_builtin_flag=$lt_no_builtin_flag ++ solaris*) ++ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ cat <&2 + +-# Compiler flag to allow reflexive dlopens. +-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec ++*** Warning: The releases 2.8.* of the GNU linker cannot reliably ++*** create shared libraries on Solaris systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.9.1 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. + +-# Compiler flag to generate shared objects directly from archives. +-whole_archive_flag_spec=$lt_whole_archive_flag_spec ++EOF ++ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; + +-# Compiler flag to generate thread-safe objects. +-thread_safe_flag_spec=$lt_thread_safe_flag_spec ++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) ++ case `$LD -v 2>&1` in ++ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ cat <<_LT_EOF 1>&2 + +-# Library versioning type. +-version_type=$version_type ++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not ++*** reliably create shared libraries on SCO systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.16.91.0.3 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. + +-# Format of library name prefix. +-libname_spec=$lt_libname_spec ++_LT_EOF ++ ;; ++ *) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' ++ else ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ;; + +-# List of archive names. First name is the real one, the rest are links. +-# The last name is the one that the linker finds with -lNAME. +-library_names_spec=$lt_library_names_spec ++ sunos4*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ wlarc= ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + +-# The coded name of the library, if different from the real name. +-soname_spec=$lt_soname_spec ++ *) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac + +-# Commands used to build and install an old-style archive. +-RANLIB=$lt_RANLIB +-old_archive_cmds=$lt_old_archive_cmds +-old_postinstall_cmds=$lt_old_postinstall_cmds +-old_postuninstall_cmds=$lt_old_postuninstall_cmds ++ if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then ++ runpath_var= ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= ++ fi ++ else ++ # PORTME fill in a description of your system's linker (not GNU ld) ++ case $host_os in ++ aix3*) ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported ++ _LT_AC_TAGVAR(always_export_symbols, $1)=yes ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' ++ # Note: this linker hardcodes the directories in LIBPATH if there ++ # are no directories specified by -L. ++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes ++ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then ++ # Neither direct hardcoding nor static linking is supported with a ++ # broken collect2. ++ _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported ++ fi ++ ;; + +-# Create an old-style archive from a shared archive. +-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds ++ aix4* | aix5*) ++ if test "$host_cpu" = ia64; then ++ # On IA64, the linker does run time linking by default, so we don't ++ # have to do anything special. ++ aix_use_runtimelinking=no ++ exp_sym_flag='-Bexport' ++ no_entry_flag="" ++ else ++ # If we're using GNU nm, then we don't want the "-C" option. ++ # -C means demangle to AIX nm, but means don't demangle with GNU nm ++ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then ++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' ++ else ++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' ++ fi ++ aix_use_runtimelinking=no + +-# Create a temporary old-style archive to link instead of a shared archive. +-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds ++ # Test if we are trying to use run time linking or normal ++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we ++ # need to do runtime linking. ++ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) ++ for ld_flag in $LDFLAGS; do ++ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then ++ aix_use_runtimelinking=yes ++ break ++ fi ++ done ++ ;; ++ esac + +-# Commands used to build and install a shared archive. +-archive_cmds=$lt_archive_cmds +-archive_expsym_cmds=$lt_archive_expsym_cmds +-postinstall_cmds=$lt_postinstall_cmds +-postuninstall_cmds=$lt_postuninstall_cmds ++ exp_sym_flag='-bexport' ++ no_entry_flag='-bnoentry' ++ fi + +-# Commands to strip libraries. +-old_striplib=$lt_old_striplib +-striplib=$lt_striplib ++ # When large executables or shared objects are built, AIX ld can ++ # have problems creating the table of contents. If linking a library ++ # or program results in "error TOC overflow" add -mminimal-toc to ++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not ++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. ++ ++ _LT_AC_TAGVAR(archive_cmds, $1)='' ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ++ ++ if test "$GCC" = yes; then ++ case $host_os in aix4.[[012]]|aix4.[[012]].*) ++ # We only want to do this on AIX 4.2 and lower, the check ++ # below for broken collect2 doesn't work under 4.3+ ++ collect2name=`${CC} -print-prog-name=collect2` ++ if test -f "$collect2name" && \ ++ strings "$collect2name" | grep resolve_lib_name >/dev/null ++ then ++ # We have reworked collect2 ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ else ++ # We have old collect2 ++ _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported ++ # It fails to find uninstalled libraries when the uninstalled ++ # path is not listed in the libpath. Setting hardcode_minus_L ++ # to unsupported forces relinking ++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= ++ fi ++ ;; ++ esac ++ shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi ++ else ++ # not using gcc ++ if test "$host_cpu" = ia64; then ++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release ++ # chokes on -Wl,-G. The following line is correct: ++ shared_flag='-G' ++ else ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag='${wl}-G' ++ else ++ shared_flag='${wl}-bM:SRE' ++ fi ++ fi ++ fi + +-# Method to check whether dependent libraries are shared objects. +-deplibs_check_method=$lt_deplibs_check_method ++ # It seems that -bexpall does not export symbols beginning with ++ # underscore (_), so it is better to generate a list of symbols to export. ++ _LT_AC_TAGVAR(always_export_symbols, $1)=yes ++ if test "$aix_use_runtimelinking" = yes; then ++ # Warning - without using the other runtime loading flags (-brtl), ++ # -berok will link without error, but may produce a broken library. ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' ++ # Determine the default libpath from the value encoded in an empty executable. ++ _LT_AC_SYS_LIBPATH_AIX ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ else ++ if test "$host_cpu" = ia64; then ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" ++ else ++ # Determine the default libpath from the value encoded in an empty executable. ++ _LT_AC_SYS_LIBPATH_AIX ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" ++ # Warning - without using the other run time loading flags, ++ # -berok will link without error, but may produce a broken library. ++ _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' ++ # Exported symbols can be pulled into shared objects from archives ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' ++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes ++ # This is similar to how AIX traditionally builds its shared libraries. ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ fi ++ fi ++ ;; + +-# Command to use when deplibs_check_method == file_magic. +-file_magic_cmd=$lt_file_magic_cmd ++ amigaos*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes ++ # see comment about different semantics on the GNU ld section ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; + +-# Flag that allows shared libraries with undefined symbols to be built. +-allow_undefined_flag=$lt_allow_undefined_flag ++ bsdi[[45]]*) ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic ++ ;; + +-# Flag that forces no undefined symbols. +-no_undefined_flag=$lt_no_undefined_flag ++ cygwin* | mingw* | pw32*) ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ # hardcode_libdir_flag_spec is actually meaningless, as there is ++ # no search path for DLLs. ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' ++ # The linker will automatically build a .lib file if we build a DLL. ++ _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' ++ # FIXME: Should let the user specify the lib program. ++ _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs' ++ _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' ++ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ++ ;; + +-# Commands used to finish a libtool library installation in a directory. +-finish_cmds=$lt_finish_cmds ++ darwin* | rhapsody*) ++ case $host_os in ++ rhapsody* | darwin1.[[012]]) ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' ++ ;; ++ *) # Darwin 1.3 on ++ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ else ++ case ${MACOSX_DEPLOYMENT_TARGET} in ++ 10.[[012]]) ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ ;; ++ 10.*) ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' ++ ;; ++ esac ++ fi ++ ;; ++ esac ++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_AC_TAGVAR(hardcode_direct, $1)=no ++ _LT_AC_TAGVAR(hardcode_automatic, $1)=yes ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ++ if test "$GCC" = yes ; then ++ output_verbose_link_cmd='echo' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' ++ _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ else ++ case $cc_basename in ++ xlc*) ++ output_verbose_link_cmd='echo' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' ++ _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ ;; ++ *) ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ fi ++ ;; + +-# Same as above, but a single script fragment to be evaled but not shown. +-finish_eval=$lt_finish_eval ++ dgux*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + +-# Take the output of nm and produce a listing of raw symbols and C names. +-global_symbol_pipe=$lt_global_symbol_pipe ++ freebsd1*) ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; + +-# Transform the output of nm in a proper C declaration +-global_symbol_to_cdecl=$lt_global_symbol_to_cdecl ++ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor ++ # support. Future versions do this automatically, but an explicit c++rt0.o ++ # does not break anything, and helps significantly (at the cost of a little ++ # extra space). ++ freebsd2.2*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + +-# This is the shared library runtime path variable. +-runpath_var=$runpath_var ++ # Unfortunately, older versions of FreeBSD 2 do not have this feature. ++ freebsd2*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + +-# This is the shared library path variable. +-shlibpath_var=$shlibpath_var ++ # FreeBSD 3 and greater uses gcc -shared to do shared libraries. ++ freebsd* | dragonfly*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + +-# Is shlibpath searched before the hard-coded library search path? +-shlibpath_overrides_runpath=$shlibpath_overrides_runpath ++ hpux9*) ++ if test "$GCC" = yes; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ else ++ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ fi ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ ;; + +-# How to hardcode a shared library path into an executable. +-hardcode_action=$hardcode_action ++ hpux10*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ if test "$with_gnu_ld" = no; then ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes ++ fi ++ ;; + +-# Whether we should hardcode library paths into libraries. +-hardcode_into_libs=$hardcode_into_libs ++ hpux11*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ case $host_cpu in ++ hppa*64*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ else ++ case $host_cpu in ++ hppa*64*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ fi ++ if test "$with_gnu_ld" = no; then ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ case $host_cpu in ++ hppa*64*|ia64*) ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' ++ _LT_AC_TAGVAR(hardcode_direct, $1)=no ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ *) ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes ++ ;; ++ esac ++ fi ++ ;; + +-# Flag to hardcode \$libdir into a binary during linking. +-# This must work even if \$libdir does not exist. +-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec ++ irix5* | irix6* | nonstopux*) ++ if test "$GCC" = yes; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' ++ fi ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ++ ;; + +-# Whether we need a single -rpath flag with a separated argument. +-hardcode_libdir_separator=$lt_hardcode_libdir_separator ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out ++ else ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF ++ fi ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + +-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the +-# resulting binary. +-hardcode_direct=$hardcode_direct ++ newsos6) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + +-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +-# resulting binary. +-hardcode_minus_L=$hardcode_minus_L ++ openbsd*) ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ else ++ case $host_os in ++ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ ;; ++ *) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ ;; ++ esac ++ fi ++ ;; + +-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +-# the resulting binary. +-hardcode_shlibpath_var=$hardcode_shlibpath_var ++ os2*) ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported ++ _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' ++ _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ++ ;; + +-# Variables whose values should be saved in libtool wrapper scripts and +-# restored at relink time. +-variables_saved_for_relink="$variables_saved_for_relink" ++ osf3*) ++ if test "$GCC" = yes; then ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ fi ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++ ;; + +-# Whether libtool must link a program against all its dependency libraries. +-link_all_deplibs=$link_all_deplibs ++ osf4* | osf5*) # as osf3* with the addition of -msym flag ++ if test "$GCC" = yes; then ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ else ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ ++ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' + +-# Compile-time system search path for libraries +-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec ++ # Both c and cxx compiler support -rpath directly ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ++ fi ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++ ;; + +-# Run-time system search path for libraries +-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec ++ solaris*) ++ _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' ++ if test "$GCC" = yes; then ++ wlarc='${wl}' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ ++ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' ++ else ++ wlarc='' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ ++ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' ++ fi ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ case $host_os in ++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; ++ *) ++ # The compiler driver will combine linker options so we ++ # cannot just pass the convience library names through ++ # without $wl, iff we do not link with $LD. ++ # Luckily, gcc supports the same syntax we need for Sun Studio. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ case $wlarc in ++ '') ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; ++ *) ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; ++ esac ;; ++ esac ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ++ ;; + +-# Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path="$fix_srcfile_path" ++ sunos4*) ++ if test "x$host_vendor" = xsequent; then ++ # Use $CC to link under sequent, because it throws in some extra .o ++ # files that make .init and .fini sections work. ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + +-# Set to yes if exported symbols are required. +-always_export_symbols=$always_export_symbols ++ sysv4) ++ case $host_vendor in ++ sni) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? ++ ;; ++ siemens) ++ ## LD is ld it makes a PLAMLIB ++ ## CC just makes a GrossModule. ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' ++ _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' ++ _LT_AC_TAGVAR(hardcode_direct, $1)=no ++ ;; ++ motorola) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie ++ ;; ++ esac ++ runpath_var='LD_RUN_PATH' ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + +-# The commands to list exported symbols. +-export_symbols_cmds=$lt_export_symbols_cmds ++ sysv4.3*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' ++ ;; + +-# The commands to extract the exported symbol list from a shared archive. +-extract_expsyms_cmds=$lt_extract_expsyms_cmds ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ runpath_var=LD_RUN_PATH ++ hardcode_runpath_var=yes ++ _LT_AC_TAGVAR(ld_shlibs, $1)=yes ++ fi ++ ;; + +-# Symbols that should not be listed in the preloaded symbols. +-exclude_expsyms=$lt_exclude_expsyms ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7*) ++ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ runpath_var='LD_RUN_PATH' ++ ++ if test "$GCC" = yes; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; + +-# Symbols that must always be exported. +-include_expsyms=$lt_include_expsyms ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' ++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' ++ runpath_var='LD_RUN_PATH' ++ ++ if test "$GCC" = yes; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; + +-# ### END LIBTOOL CONFIG ++ uts4*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + +-__EOF__ ++ *) ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ fi ++]) ++AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) ++test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +- case $host_os in +- aix3*) +- cat <<\EOF >> "${ofile}T" ++# ++# Do we need to explicitly link libc? ++# ++case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in ++x|xyes) ++ # Assume -lc should be added ++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes ++ ++ if test "$enable_shared" = yes && test "$GCC" = yes; then ++ case $_LT_AC_TAGVAR(archive_cmds, $1) in ++ *'~'*) ++ # FIXME: we may have to deal with multi-command sequences. ++ ;; ++ '$CC '*) ++ # Test whether the compiler implicitly links with -lc since on some ++ # systems, -lgcc has to come before -lc. If gcc already passes -lc ++ # to ld, don't add -lc before -lgcc. ++ AC_MSG_CHECKING([whether -lc should be explicitly linked in]) ++ $rm conftest* ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then ++ soname=conftest ++ lib=conftest ++ libobjs=conftest.$ac_objext ++ deplibs= ++ wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) ++ pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) ++ compiler_flags=-v ++ linker_flags=-v ++ verstring= ++ output_objdir=. ++ libname=conftest ++ lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)= ++ if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) ++ then ++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ++ else ++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes ++ fi ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag ++ else ++ cat conftest.err 1>&5 ++ fi ++ $rm conftest* ++ AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) ++ ;; ++ esac ++ fi ++ ;; ++esac ++])# AC_LIBTOOL_PROG_LD_SHLIBS + +-# AIX sometimes has problems with the GCC collect2 program. For some +-# reason, if we set the COLLECT_NAMES environment variable, the problems +-# vanish in a puff of smoke. +-if test "X${COLLECT_NAMES+set}" != Xset; then +- COLLECT_NAMES= +- export COLLECT_NAMES +-fi +-EOF +- ;; +- esac + +- case $host_os in +- cygwin* | mingw* | pw32* | os2*) +- cat <<'EOF' >> "${ofile}T" +- # This is a source program that is used to create dlls on Windows +- # Don't remove nor modify the starting and closing comments ++# _LT_AC_FILE_LTDLL_C ++# ------------------- ++# Be careful that the start marker always follows a newline. ++AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ + # /* ltdll.c starts here */ + # #define WIN32_LEAN_AND_MEAN + # #include +@@ -2690,739 +6289,931 @@ + # return TRUE; + # } + # /* ltdll.c ends here */ +- # This is a source program that is used to create import libraries +- # on Windows for dlls which lack them. Don't remove nor modify the +- # starting and closing comments +-# /* impgen.c starts here */ +-# /* Copyright (C) 1999-2000 Free Software Foundation, Inc. +-# +-# This file is part of GNU libtool. +-# +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2 of the License, or +-# (at your option) any later version. +-# +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +-# +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +-# */ +-# +-# #include /* for printf() */ +-# #include /* for open(), lseek(), read() */ +-# #include /* for O_RDONLY, O_BINARY */ +-# #include /* for strdup() */ +-# +-# /* O_BINARY isn't required (or even defined sometimes) under Unix */ +-# #ifndef O_BINARY +-# #define O_BINARY 0 +-# #endif +-# +-# static unsigned int +-# pe_get16 (fd, offset) +-# int fd; +-# int offset; +-# { +-# unsigned char b[2]; +-# lseek (fd, offset, SEEK_SET); +-# read (fd, b, 2); +-# return b[0] + (b[1]<<8); +-# } +-# +-# static unsigned int +-# pe_get32 (fd, offset) +-# int fd; +-# int offset; +-# { +-# unsigned char b[4]; +-# lseek (fd, offset, SEEK_SET); +-# read (fd, b, 4); +-# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); +-# } +-# +-# static unsigned int +-# pe_as32 (ptr) +-# void *ptr; +-# { +-# unsigned char *b = ptr; +-# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); +-# } +-# +-# int +-# main (argc, argv) +-# int argc; +-# char *argv[]; +-# { +-# int dll; +-# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; +-# unsigned long export_rva, export_size, nsections, secptr, expptr; +-# unsigned long name_rvas, nexp; +-# unsigned char *expdata, *erva; +-# char *filename, *dll_name; +-# +-# filename = argv[1]; +-# +-# dll = open(filename, O_RDONLY|O_BINARY); +-# if (dll < 1) +-# return 1; +-# +-# dll_name = filename; +-# +-# for (i=0; filename[i]; i++) +-# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') +-# dll_name = filename + i +1; +-# +-# pe_header_offset = pe_get32 (dll, 0x3c); +-# opthdr_ofs = pe_header_offset + 4 + 20; +-# num_entries = pe_get32 (dll, opthdr_ofs + 92); +-# +-# if (num_entries < 1) /* no exports */ +-# return 1; +-# +-# export_rva = pe_get32 (dll, opthdr_ofs + 96); +-# export_size = pe_get32 (dll, opthdr_ofs + 100); +-# nsections = pe_get16 (dll, pe_header_offset + 4 +2); +-# secptr = (pe_header_offset + 4 + 20 + +-# pe_get16 (dll, pe_header_offset + 4 + 16)); +-# +-# expptr = 0; +-# for (i = 0; i < nsections; i++) +-# { +-# char sname[8]; +-# unsigned long secptr1 = secptr + 40 * i; +-# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); +-# unsigned long vsize = pe_get32 (dll, secptr1 + 16); +-# unsigned long fptr = pe_get32 (dll, secptr1 + 20); +-# lseek(dll, secptr1, SEEK_SET); +-# read(dll, sname, 8); +-# if (vaddr <= export_rva && vaddr+vsize > export_rva) +-# { +-# expptr = fptr + (export_rva - vaddr); +-# if (export_rva + export_size > vaddr + vsize) +-# export_size = vsize - (export_rva - vaddr); +-# break; +-# } +-# } +-# +-# expdata = (unsigned char*)malloc(export_size); +-# lseek (dll, expptr, SEEK_SET); +-# read (dll, expdata, export_size); +-# erva = expdata - export_rva; +-# +-# nexp = pe_as32 (expdata+24); +-# name_rvas = pe_as32 (expdata+32); +-# +-# printf ("EXPORTS\n"); +-# for (i = 0; i> "${ofile}T" || (rm -f "${ofile}T"; exit 1) + +- mv -f "${ofile}T" "$ofile" || \ +- (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T") +- chmod +x "$ofile" +-fi ++# _LT_AC_TAGVAR(VARNAME, [TAGNAME]) ++# --------------------------------- ++AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])]) + +-])# _LT_AC_LTCONFIG_HACK + +-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support +-AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) ++# old names ++AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) ++AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) ++AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) ++AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) ++AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) ++AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) ++AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) + +-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's +-AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) ++# This is just to silence aclocal about the macro not being used ++ifelse([AC_DISABLE_FAST_INSTALL]) + +-# AC_ENABLE_SHARED - implement the --enable-shared flag +-# Usage: AC_ENABLE_SHARED[(DEFAULT)] +-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to +-# `yes'. +-AC_DEFUN([AC_ENABLE_SHARED], +-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl +-AC_ARG_ENABLE(shared, +-changequote(<<, >>)dnl +-<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], +-changequote([, ])dnl +-[p=${PACKAGE-default} +-case $enableval in +-yes) enable_shared=yes ;; +-no) enable_shared=no ;; +-*) +- enable_shared=no +- # Look at the argument we got. We use all the common list separators. +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," +- for pkg in $enableval; do +- if test "X$pkg" = "X$p"; then +- enable_shared=yes +- fi +- done +- IFS="$ac_save_ifs" +- ;; +-esac], +-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl ++AC_DEFUN([LT_AC_PROG_GCJ], ++[AC_CHECK_TOOL(GCJ, gcj, no) ++ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" ++ AC_SUBST(GCJFLAGS) + ]) + +-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared +-AC_DEFUN([AC_DISABLE_SHARED], +-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +-AC_ENABLE_SHARED(no)]) +- +-# AC_ENABLE_STATIC - implement the --enable-static flag +-# Usage: AC_ENABLE_STATIC[(DEFAULT)] +-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to +-# `yes'. +-AC_DEFUN([AC_ENABLE_STATIC], +-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl +-AC_ARG_ENABLE(static, +-changequote(<<, >>)dnl +-<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], +-changequote([, ])dnl +-[p=${PACKAGE-default} +-case $enableval in +-yes) enable_static=yes ;; +-no) enable_static=no ;; +-*) +- enable_static=no +- # Look at the argument we got. We use all the common list separators. +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," +- for pkg in $enableval; do +- if test "X$pkg" = "X$p"; then +- enable_static=yes +- fi +- done +- IFS="$ac_save_ifs" +- ;; +-esac], +-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl ++AC_DEFUN([LT_AC_PROG_RC], ++[AC_CHECK_TOOL(RC, windres, no) + ]) + +-# AC_DISABLE_STATIC - set the default static flag to --disable-static +-AC_DEFUN([AC_DISABLE_STATIC], +-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +-AC_ENABLE_STATIC(no)]) +- +- +-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag +-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] +-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to +-# `yes'. +-AC_DEFUN([AC_ENABLE_FAST_INSTALL], +-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl +-AC_ARG_ENABLE(fast-install, +-changequote(<<, >>)dnl +-<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], +-changequote([, ])dnl +-[p=${PACKAGE-default} +-case $enableval in +-yes) enable_fast_install=yes ;; +-no) enable_fast_install=no ;; +-*) +- enable_fast_install=no +- # Look at the argument we got. We use all the common list separators. +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," +- for pkg in $enableval; do +- if test "X$pkg" = "X$p"; then +- enable_fast_install=yes ++# NOTE: This macro has been submitted for inclusion into # ++# GNU Autoconf as AC_PROG_SED. When it is available in # ++# a released version of Autoconf we should remove this # ++# macro and use it instead. # ++# LT_AC_PROG_SED ++# -------------- ++# Check for a fully-functional sed program, that truncates ++# as few characters as possible. Prefer GNU sed if found. ++AC_DEFUN([LT_AC_PROG_SED], ++[AC_MSG_CHECKING([for a sed that does not truncate output]) ++AC_CACHE_VAL(lt_cv_path_SED, ++[# Loop through the user's path and test for sed and gsed. ++# Then use that list of sed's as ones to test for truncation. ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for lt_ac_prog in sed gsed; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then ++ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" ++ fi ++ done ++ done ++done ++lt_ac_max=0 ++lt_ac_count=0 ++# Add /usr/xpg4/bin/sed as it is typically found on Solaris ++# along with /bin/sed that truncates output. ++for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do ++ test ! -f $lt_ac_sed && continue ++ cat /dev/null > conftest.in ++ lt_ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >conftest.in ++ # Check for GNU sed and select it if it is found. ++ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then ++ lt_cv_path_SED=$lt_ac_sed ++ break ++ fi ++ while true; do ++ cat conftest.in conftest.in >conftest.tmp ++ mv conftest.tmp conftest.in ++ cp conftest.in conftest.nl ++ echo >>conftest.nl ++ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break ++ cmp -s conftest.out conftest.nl || break ++ # 10000 chars as input seems more than enough ++ test $lt_ac_count -gt 10 && break ++ lt_ac_count=`expr $lt_ac_count + 1` ++ if test $lt_ac_count -gt $lt_ac_max; then ++ lt_ac_max=$lt_ac_count ++ lt_cv_path_SED=$lt_ac_sed + fi + done +- IFS="$ac_save_ifs" +- ;; +-esac], +-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl ++done ++]) ++SED=$lt_cv_path_SED ++AC_MSG_RESULT([$SED]) + ]) + +-# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install +-AC_DEFUN([AC_DISABLE_FAST_INSTALL], +-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +-AC_ENABLE_FAST_INSTALL(no)]) +- +-# AC_LIBTOOL_PICMODE - implement the --with-pic flag +-# Usage: AC_LIBTOOL_PICMODE[(MODE)] +-# Where MODE is either `yes' or `no'. If omitted, it defaults to +-# `both'. +-AC_DEFUN([AC_LIBTOOL_PICMODE], +-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +-pic_mode=ifelse($#,1,$1,default)]) ++# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# AM_AUTOMAKE_VERSION(VERSION) ++# ---------------------------- ++# Automake X.Y traces this macro to ensure aclocal.m4 has been ++# generated from the m4 files accompanying Automake X.Y. ++AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) ++ ++# AM_SET_CURRENT_AUTOMAKE_VERSION ++# ------------------------------- ++# Call AM_AUTOMAKE_VERSION so it can be traced. ++# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. ++AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], ++ [AM_AUTOMAKE_VERSION([1.9.6])]) + ++# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +-# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library +-AC_DEFUN([AC_PATH_TOOL_PREFIX], +-[AC_MSG_CHECKING([for $1]) +-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +-[case $MAGIC_CMD in +- /*) +- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. +- ;; +- ?:/*) +- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. +- ;; +- *) +- ac_save_MAGIC_CMD="$MAGIC_CMD" +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" +-dnl $ac_dummy forces splitting on constant user-supplied paths. +-dnl POSIX.2 word splitting is done only on the output of word expansions, +-dnl not every word. This closes a longstanding sh security hole. +- ac_dummy="ifelse([$2], , $PATH, [$2])" +- for ac_dir in $ac_dummy; do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$1; then +- lt_cv_path_MAGIC_CMD="$ac_dir/$1" +- if test -n "$file_magic_test_file"; then +- case $deplibs_check_method in +- "file_magic "*) +- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" +- MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | +- egrep "$file_magic_regex" > /dev/null; then +- : +- else +- cat <&2 ++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets ++# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to ++# `$srcdir', `$srcdir/..', or `$srcdir/../..'. ++# ++# Of course, Automake must honor this variable whenever it calls a ++# tool from the auxiliary directory. The problem is that $srcdir (and ++# therefore $ac_aux_dir as well) can be either absolute or relative, ++# depending on how configure is run. This is pretty annoying, since ++# it makes $ac_aux_dir quite unusable in subdirectories: in the top ++# source directory, any form will work fine, but in subdirectories a ++# relative path needs to be adjusted first. ++# ++# $ac_aux_dir/missing ++# fails when called from a subdirectory if $ac_aux_dir is relative ++# $top_srcdir/$ac_aux_dir/missing ++# fails if $ac_aux_dir is absolute, ++# fails when called from a subdirectory in a VPATH build with ++# a relative $ac_aux_dir ++# ++# The reason of the latter failure is that $top_srcdir and $ac_aux_dir ++# are both prefixed by $srcdir. In an in-source build this is usually ++# harmless because $srcdir is `.', but things will broke when you ++# start a VPATH build or use an absolute $srcdir. ++# ++# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, ++# iff we strip the leading $srcdir from $ac_aux_dir. That would be: ++# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` ++# and then we would define $MISSING as ++# MISSING="\${SHELL} $am_aux_dir/missing" ++# This will work as long as MISSING is not called from configure, because ++# unfortunately $(top_srcdir) has no meaning in configure. ++# However there are other variables, like CC, which are often used in ++# configure, and could therefore not use this "fixed" $ac_aux_dir. ++# ++# Another solution, used here, is to always expand $ac_aux_dir to an ++# absolute PATH. The drawback is that using absolute paths prevent a ++# configured tree to be moved without reconfiguration. ++ ++AC_DEFUN([AM_AUX_DIR_EXPAND], ++[dnl Rely on autoconf to set up CDPATH properly. ++AC_PREREQ([2.50])dnl ++# expand $ac_aux_dir to an absolute path ++am_aux_dir=`cd $ac_aux_dir && pwd` ++]) + +-*** Warning: the command libtool uses to detect shared libraries, +-*** $file_magic_cmd, produces output that libtool cannot recognize. +-*** The result is that libtool may fail to recognize shared libraries +-*** as such. This will affect the creation of libtool libraries that +-*** depend on shared libraries, but programs linked with such libtool +-*** libraries will work regardless of this problem. Nevertheless, you +-*** may want to report the problem to your system manager and/or to +-*** bug-libtool@gnu.org ++# AM_CONDITIONAL -*- Autoconf -*- + +-EOF +- fi ;; +- esac +- fi +- break +- fi +- done +- IFS="$ac_save_ifs" +- MAGIC_CMD="$ac_save_MAGIC_CMD" +- ;; +-esac]) +-MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +-if test -n "$MAGIC_CMD"; then +- AC_MSG_RESULT($MAGIC_CMD) ++# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 7 ++ ++# AM_CONDITIONAL(NAME, SHELL-CONDITION) ++# ------------------------------------- ++# Define a conditional. ++AC_DEFUN([AM_CONDITIONAL], ++[AC_PREREQ(2.52)dnl ++ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], ++ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl ++AC_SUBST([$1_TRUE]) ++AC_SUBST([$1_FALSE]) ++if $2; then ++ $1_TRUE= ++ $1_FALSE='#' + else +- AC_MSG_RESULT(no) ++ $1_TRUE='#' ++ $1_FALSE= + fi +-]) ++AC_CONFIG_COMMANDS_PRE( ++[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then ++ AC_MSG_ERROR([[conditional "$1" was never defined. ++Usually this means the macro was only invoked conditionally.]]) ++fi])]) + + +-# AC_PATH_MAGIC - find a file program which can recognise a shared library +-AC_DEFUN([AC_PATH_MAGIC], +-[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl +-AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH) +-if test -z "$lt_cv_path_MAGIC_CMD"; then +- if test -n "$ac_tool_prefix"; then +- AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH) +- else +- MAGIC_CMD=: ++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 8 ++ ++# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be ++# written in clear, in which case automake, when reading aclocal.m4, ++# will think it sees a *use*, and therefore will trigger all it's ++# C support machinery. Also note that it means that autoscan, seeing ++# CC etc. in the Makefile, will ask for an AC_PROG_CC use... ++ ++ ++# _AM_DEPENDENCIES(NAME) ++# ---------------------- ++# See how the compiler implements dependency checking. ++# NAME is "CC", "CXX", "GCJ", or "OBJC". ++# We try a few techniques and use that to set a single cache variable. ++# ++# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was ++# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular ++# dependency, and given that the user is not expected to run this macro, ++# just rely on AC_PROG_CC. ++AC_DEFUN([_AM_DEPENDENCIES], ++[AC_REQUIRE([AM_SET_DEPDIR])dnl ++AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl ++AC_REQUIRE([AM_MAKE_INCLUDE])dnl ++AC_REQUIRE([AM_DEP_TRACK])dnl ++ ++ifelse([$1], CC, [depcc="$CC" am_compiler_list=], ++ [$1], CXX, [depcc="$CXX" am_compiler_list=], ++ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], ++ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], ++ [depcc="$$1" am_compiler_list=]) ++ ++AC_CACHE_CHECK([dependency style of $depcc], ++ [am_cv_$1_dependencies_compiler_type], ++[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then ++ # We make a subdir and do the tests there. Otherwise we can end up ++ # making bogus files that we don't know about and never remove. For ++ # instance it was reported that on HP-UX the gcc test will end up ++ # making a dummy file named `D' -- because `-MD' means `put the output ++ # in D'. ++ mkdir conftest.dir ++ # Copy depcomp to subdir because otherwise we won't find it if we're ++ # using a relative directory. ++ cp "$am_depcomp" conftest.dir ++ cd conftest.dir ++ # We will build objects and dependencies in a subdirectory because ++ # it helps to detect inapplicable dependency modes. For instance ++ # both Tru64's cc and ICC support -MD to output dependencies as a ++ # side effect of compilation, but ICC will put the dependencies in ++ # the current directory while Tru64 will put them in the object ++ # directory. ++ mkdir sub ++ ++ am_cv_$1_dependencies_compiler_type=none ++ if test "$am_compiler_list" = ""; then ++ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi +-fi +-]) +- +- +-# AC_PROG_LD - find the path to the GNU or non-GNU linker +-AC_DEFUN([AC_PROG_LD], +-[AC_ARG_WITH(gnu-ld, +-[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], +-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) +-AC_REQUIRE([AC_PROG_CC])dnl +-AC_REQUIRE([AC_CANONICAL_HOST])dnl +-AC_REQUIRE([AC_CANONICAL_BUILD])dnl +-ac_prog=ld +-if test "$GCC" = yes; then +- # Check if gcc -print-prog-name=ld gives a path. +- AC_MSG_CHECKING([for ld used by GCC]) +- case $host in +- *-*-mingw*) +- # gcc leaves a trailing carriage return which upsets mingw +- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; +- *) +- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; +- esac +- case $ac_prog in +- # Accept absolute paths. +- [[\\/]* | [A-Za-z]:[\\/]*)] +- [re_direlt='/[^/][^/]*/\.\./'] +- # Canonicalize the path of ld +- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` +- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do +- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` +- done +- test -z "$LD" && LD="$ac_prog" +- ;; +- "") +- # If it fails, then pretend we aren't using GCC. +- ac_prog=ld +- ;; +- *) +- # If it is relative, then search for the first ld in PATH. +- with_gnu_ld=unknown +- ;; +- esac +-elif test "$with_gnu_ld" = yes; then +- AC_MSG_CHECKING([for GNU ld]) +-else +- AC_MSG_CHECKING([for non-GNU ld]) +-fi +-AC_CACHE_VAL(lt_cv_path_LD, +-[if test -z "$LD"; then +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" +- for ac_dir in $PATH; do +- test -z "$ac_dir" && ac_dir=. +- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then +- lt_cv_path_LD="$ac_dir/$ac_prog" +- # Check to see if the program is GNU ld. I'd rather use --version, +- # but apparently some GNU ld's only accept -v. +- # Break only if it was the GNU/non-GNU ld that we prefer. +- if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then +- test "$with_gnu_ld" != no && break ++ for depmode in $am_compiler_list; do ++ # Setup a source with many dependencies, because some compilers ++ # like to wrap large dependency lists on column 80 (with \), and ++ # we should not choose a depcomp mode which is confused by this. ++ # ++ # We need to recreate these files for each test, as the compiler may ++ # overwrite some of them when testing with obscure command lines. ++ # This happens at least with the AIX C compiler. ++ : > sub/conftest.c ++ for i in 1 2 3 4 5 6; do ++ echo '#include "conftst'$i'.h"' >> sub/conftest.c ++ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with ++ # Solaris 8's {/usr,}/bin/sh. ++ touch sub/conftst$i.h ++ done ++ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf ++ ++ case $depmode in ++ nosideeffect) ++ # after this tag, mechanisms are not by side-effect, so they'll ++ # only be used when explicitly requested ++ if test "x$enable_dependency_tracking" = xyes; then ++ continue + else +- test "$with_gnu_ld" != yes && break ++ break ++ fi ++ ;; ++ none) break ;; ++ esac ++ # We check with `-c' and `-o' for the sake of the "dashmstdout" ++ # mode. It turns out that the SunPro C++ compiler does not properly ++ # handle `-M -o', and we need to detect this. ++ if depmode=$depmode \ ++ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ ++ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ ++ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ ++ >/dev/null 2>conftest.err && ++ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && ++ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then ++ # icc doesn't choke on unknown options, it will just issue warnings ++ # or remarks (even with -Werror). So we grep stderr for any message ++ # that says an option was ignored or not supported. ++ # When given -MP, icc 7.0 and 7.1 complain thusly: ++ # icc: Command line warning: ignoring option '-M'; no argument required ++ # The diagnosis changed in icc 8.0: ++ # icc: Command line remark: option '-MP' not supported ++ if (grep 'ignoring option' conftest.err || ++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else ++ am_cv_$1_dependencies_compiler_type=$depmode ++ break + fi + fi + done +- IFS="$ac_save_ifs" +-else +- lt_cv_path_LD="$LD" # Let the user override the test with a path. +-fi]) +-LD="$lt_cv_path_LD" +-if test -n "$LD"; then +- AC_MSG_RESULT($LD) +-else +- AC_MSG_RESULT(no) +-fi +-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) +-AC_PROG_LD_GNU +-]) + +-# AC_PROG_LD_GNU - +-AC_DEFUN([AC_PROG_LD_GNU], +-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, +-[# I'd rather use --version here, but apparently some GNU ld's only accept -v. +-if $LD -v 2>&1 &5; then +- lt_cv_prog_gnu_ld=yes ++ cd .. ++ rm -rf conftest.dir + else +- lt_cv_prog_gnu_ld=no +-fi]) +-with_gnu_ld=$lt_cv_prog_gnu_ld ++ am_cv_$1_dependencies_compiler_type=none ++fi + ]) +- +-# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker +-# -- PORTME Some linkers may need a different reload flag. +-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG], +-[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag, +-[lt_cv_ld_reload_flag='-r']) +-reload_flag=$lt_cv_ld_reload_flag +-test -n "$reload_flag" && reload_flag=" $reload_flag" ++AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) ++AM_CONDITIONAL([am__fastdep$1], [ ++ test "x$enable_dependency_tracking" != xno \ ++ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) + ]) + +-# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies +-# -- PORTME fill in with the dynamic library characteristics +-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD], +-[AC_CACHE_CHECK([how to recognise dependant libraries], +-lt_cv_deplibs_check_method, +-[lt_cv_file_magic_cmd='$MAGIC_CMD' +-lt_cv_file_magic_test_file= +-lt_cv_deplibs_check_method='unknown' +-# Need to set the preceding variable on all platforms that support +-# interlibrary dependencies. +-# 'none' -- dependencies not supported. +-# `unknown' -- same as none, but documents that we really don't know. +-# 'pass_all' -- all dependencies passed with no checks. +-# 'test_compile' -- check by making test program. +-# ['file_magic [regex]'] -- check by looking for files in library path +-# which responds to the $file_magic_cmd with a given egrep regex. +-# If you have `file' or equivalent on your system and you're not sure +-# whether `pass_all' will *always* work, you probably want this one. +- +-case $host_os in +-aix4* | aix5*) +- lt_cv_deplibs_check_method=pass_all +- ;; + +-beos*) +- lt_cv_deplibs_check_method=pass_all +- ;; ++# AM_SET_DEPDIR ++# ------------- ++# Choose a directory name for dependency files. ++# This macro is AC_REQUIREd in _AM_DEPENDENCIES ++AC_DEFUN([AM_SET_DEPDIR], ++[AC_REQUIRE([AM_SET_LEADING_DOT])dnl ++AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ++]) + +-bsdi4*) +- [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'] +- lt_cv_file_magic_cmd='/usr/bin/file -L' +- lt_cv_file_magic_test_file=/shlib/libc.so +- ;; + +-cygwin* | mingw* | pw32*) +- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' +- lt_cv_file_magic_cmd='$OBJDUMP -f' +- ;; ++# AM_DEP_TRACK ++# ------------ ++AC_DEFUN([AM_DEP_TRACK], ++[AC_ARG_ENABLE(dependency-tracking, ++[ --disable-dependency-tracking speeds up one-time build ++ --enable-dependency-tracking do not reject slow dependency extractors]) ++if test "x$enable_dependency_tracking" != xno; then ++ am_depcomp="$ac_aux_dir/depcomp" ++ AMDEPBACKSLASH='\' ++fi ++AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) ++AC_SUBST([AMDEPBACKSLASH]) ++]) + +-darwin* | rhapsody*) +- lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' +- lt_cv_file_magic_cmd='/usr/bin/file -L' +- case "$host_os" in +- rhapsody* | darwin1.[012]) +- lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1` +- ;; +- *) # Darwin 1.3 on +- lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' +- ;; +- esac +- ;; ++# Generate code to set up dependency tracking. -*- Autoconf -*- + +-freebsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then +- case $host_cpu in +- i*86 ) +- # Not sure whether the presence of OpenBSD here was a mistake. +- # Let's accept both of them until this is cleared up. +- [lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'] +- lt_cv_file_magic_cmd=/usr/bin/file +- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` +- ;; +- esac ++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++#serial 3 ++ ++# _AM_OUTPUT_DEPENDENCY_COMMANDS ++# ------------------------------ ++AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], ++[for mf in $CONFIG_FILES; do ++ # Strip MF so we end up with the name of the file. ++ mf=`echo "$mf" | sed -e 's/:.*$//'` ++ # Check whether this is an Automake generated Makefile or not. ++ # We used to match only the files named `Makefile.in', but ++ # some people rename them; so instead we look at the file content. ++ # Grep'ing the first line is not enough: some people post-process ++ # each Makefile.in and add a new line on top of each file to say so. ++ # So let's grep whole file. ++ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then ++ dirpart=`AS_DIRNAME("$mf")` + else +- lt_cv_deplibs_check_method=pass_all ++ continue + fi +- ;; ++ # Extract the definition of DEPDIR, am__include, and am__quote ++ # from the Makefile without running `make'. ++ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` ++ test -z "$DEPDIR" && continue ++ am__include=`sed -n 's/^am__include = //p' < "$mf"` ++ test -z "am__include" && continue ++ am__quote=`sed -n 's/^am__quote = //p' < "$mf"` ++ # When using ansi2knr, U may be empty or an underscore; expand it ++ U=`sed -n 's/^U = //p' < "$mf"` ++ # Find all dependency output files, they are included files with ++ # $(DEPDIR) in their names. We invoke sed twice because it is the ++ # simplest approach to changing $(DEPDIR) to its actual value in the ++ # expansion. ++ for file in `sed -n " ++ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ ++ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do ++ # Make sure the directory exists. ++ test -f "$dirpart/$file" && continue ++ fdir=`AS_DIRNAME(["$file"])` ++ AS_MKDIR_P([$dirpart/$fdir]) ++ # echo "creating $dirpart/$file" ++ echo '# dummy' > "$dirpart/$file" ++ done ++done ++])# _AM_OUTPUT_DEPENDENCY_COMMANDS + +-gnu*) +- lt_cv_deplibs_check_method=pass_all +- ;; + +-hpux10.20*|hpux11*) +- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'] +- lt_cv_file_magic_cmd=/usr/bin/file +- lt_cv_file_magic_test_file=/usr/lib/libc.sl +- ;; ++# AM_OUTPUT_DEPENDENCY_COMMANDS ++# ----------------------------- ++# This macro should only be invoked once -- use via AC_REQUIRE. ++# ++# This code is only required when automatic dependency tracking ++# is enabled. FIXME. This creates each `.P' file that we will ++# need in order to bootstrap the dependency handling code. ++AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], ++[AC_CONFIG_COMMANDS([depfiles], ++ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], ++ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ++]) + +-irix5* | irix6*) +- case $host_os in +- irix5*) +- # this will be overridden with pass_all, but let us keep it just in case +- lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" +- ;; +- *) +- case $LD in +- *-32|*"-32 ") libmagic=32-bit;; +- *-n32|*"-n32 ") libmagic=N32;; +- *-64|*"-64 ") libmagic=64-bit;; +- *) libmagic=never-match;; +- esac +- # this will be overridden with pass_all, but let us keep it just in case +- [lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"] +- ;; +- esac +- lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` +- lt_cv_deplibs_check_method=pass_all +- ;; ++# Do all the work for Automake. -*- Autoconf -*- + +-# This must be Linux ELF. +-linux-gnu*) +- case $host_cpu in +- alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* | mips*el* ) +- lt_cv_deplibs_check_method=pass_all ;; +- *) +- # glibc up to 2.1.1 does not perform some relocations on ARM +- [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;] +- esac +- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` +- ;; ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 12 ++ ++# This macro actually does too much. Some checks are only needed if ++# your package does certain things. But this isn't really a big deal. ++ ++# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) ++# AM_INIT_AUTOMAKE([OPTIONS]) ++# ----------------------------------------------- ++# The call with PACKAGE and VERSION arguments is the old style ++# call (pre autoconf-2.50), which is being phased out. PACKAGE ++# and VERSION should now be passed to AC_INIT and removed from ++# the call to AM_INIT_AUTOMAKE. ++# We support both call styles for the transition. After ++# the next Automake release, Autoconf can make the AC_INIT ++# arguments mandatory, and then we can depend on a new Autoconf ++# release and drop the old call support. ++AC_DEFUN([AM_INIT_AUTOMAKE], ++[AC_PREREQ([2.58])dnl ++dnl Autoconf wants to disallow AM_ names. We explicitly allow ++dnl the ones we care about. ++m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl ++AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl ++AC_REQUIRE([AC_PROG_INSTALL])dnl ++# test to see if srcdir already configured ++if test "`cd $srcdir && pwd`" != "`pwd`" && ++ test -f $srcdir/config.status; then ++ AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) ++fi + +-netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then +- [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'] ++# test whether we have cygpath ++if test -z "$CYGPATH_W"; then ++ if (cygpath --version) >/dev/null 2>/dev/null; then ++ CYGPATH_W='cygpath -w' + else +- [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'] ++ CYGPATH_W=echo + fi +- ;; ++fi ++AC_SUBST([CYGPATH_W]) + +-newos6*) +- [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'] +- lt_cv_file_magic_cmd=/usr/bin/file +- lt_cv_file_magic_test_file=/usr/lib/libnls.so +- ;; ++# Define the identity of the package. ++dnl Distinguish between old-style and new-style calls. ++m4_ifval([$2], ++[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl ++ AC_SUBST([PACKAGE], [$1])dnl ++ AC_SUBST([VERSION], [$2])], ++[_AM_SET_OPTIONS([$1])dnl ++ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl ++ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl ++ ++_AM_IF_OPTION([no-define],, ++[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) ++ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl ++ ++# Some tools Automake needs. ++AC_REQUIRE([AM_SANITY_CHECK])dnl ++AC_REQUIRE([AC_ARG_PROGRAM])dnl ++AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) ++AM_MISSING_PROG(AUTOCONF, autoconf) ++AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) ++AM_MISSING_PROG(AUTOHEADER, autoheader) ++AM_MISSING_PROG(MAKEINFO, makeinfo) ++AM_PROG_INSTALL_SH ++AM_PROG_INSTALL_STRIP ++AC_REQUIRE([AM_PROG_MKDIR_P])dnl ++# We need awk for the "check" target. The system "awk" is bad on ++# some platforms. ++AC_REQUIRE([AC_PROG_AWK])dnl ++AC_REQUIRE([AC_PROG_MAKE_SET])dnl ++AC_REQUIRE([AM_SET_LEADING_DOT])dnl ++_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], ++ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], ++ [_AM_PROG_TAR([v7])])]) ++_AM_IF_OPTION([no-dependencies],, ++[AC_PROVIDE_IFELSE([AC_PROG_CC], ++ [_AM_DEPENDENCIES(CC)], ++ [define([AC_PROG_CC], ++ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl ++AC_PROVIDE_IFELSE([AC_PROG_CXX], ++ [_AM_DEPENDENCIES(CXX)], ++ [define([AC_PROG_CXX], ++ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl ++]) ++]) + +-osf3* | osf4* | osf5*) +- # this will be overridden with pass_all, but let us keep it just in case +- lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' +- lt_cv_file_magic_test_file=/shlib/libc.so +- lt_cv_deplibs_check_method=pass_all +- ;; + +-sco3.2v5*) +- lt_cv_deplibs_check_method=pass_all +- ;; ++# When config.status generates a header, we must update the stamp-h file. ++# This file resides in the same directory as the config header ++# that is generated. The stamp files are numbered to have different names. ++ ++# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the ++# loop where config.status creates the headers, so we can generate ++# our stamp files there. ++AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], ++[# Compute $1's index in $config_headers. ++_am_stamp_count=1 ++for _am_header in $config_headers :; do ++ case $_am_header in ++ $1 | $1:* ) ++ break ;; ++ * ) ++ _am_stamp_count=`expr $_am_stamp_count + 1` ;; ++ esac ++done ++echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) + +-solaris*) +- lt_cv_deplibs_check_method=pass_all +- lt_cv_file_magic_test_file=/lib/libc.so +- ;; ++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# AM_PROG_INSTALL_SH ++# ------------------ ++# Define $install_sh. ++AC_DEFUN([AM_PROG_INSTALL_SH], ++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ++install_sh=${install_sh-"$am_aux_dir/install-sh"} ++AC_SUBST(install_sh)]) + +-[sysv5uw[78]* | sysv4*uw2*)] +- lt_cv_deplibs_check_method=pass_all +- ;; ++# Copyright (C) 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 2 ++ ++# Check whether the underlying file-system supports filenames ++# with a leading dot. For instance MS-DOS doesn't. ++AC_DEFUN([AM_SET_LEADING_DOT], ++[rm -rf .tst 2>/dev/null ++mkdir .tst 2>/dev/null ++if test -d .tst; then ++ am__leading_dot=. ++else ++ am__leading_dot=_ ++fi ++rmdir .tst 2>/dev/null ++AC_SUBST([am__leading_dot])]) + +-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) +- case $host_vendor in +- motorola) +- [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'] +- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` +- ;; +- ncr) +- lt_cv_deplibs_check_method=pass_all +- ;; +- sequent) +- lt_cv_file_magic_cmd='/bin/file' +- [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'] +- ;; +- sni) +- lt_cv_file_magic_cmd='/bin/file' +- [lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"] +- lt_cv_file_magic_test_file=/lib/libc.so +- ;; +- esac +- ;; +-esac +-]) +-file_magic_cmd=$lt_cv_file_magic_cmd +-deplibs_check_method=$lt_cv_deplibs_check_method ++# Check to see how 'make' treats includes. -*- Autoconf -*- ++ ++# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 3 ++ ++# AM_MAKE_INCLUDE() ++# ----------------- ++# Check to see how make treats includes. ++AC_DEFUN([AM_MAKE_INCLUDE], ++[am_make=${MAKE-make} ++cat > confinc << 'END' ++am__doit: ++ @echo done ++.PHONY: am__doit ++END ++# If we don't find an include directive, just comment out the code. ++AC_MSG_CHECKING([for style of include used by $am_make]) ++am__include="#" ++am__quote= ++_am_result=none ++# First try GNU make style include. ++echo "include confinc" > confmf ++# We grep out `Entering directory' and `Leaving directory' ++# messages which can occur if `w' ends up in MAKEFLAGS. ++# In particular we don't look at `^make:' because GNU make might ++# be invoked under some other name (usually "gmake"), in which ++# case it prints its new name instead of `make'. ++if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then ++ am__include=include ++ am__quote= ++ _am_result=GNU ++fi ++# Now try BSD make style include. ++if test "$am__include" = "#"; then ++ echo '.include "confinc"' > confmf ++ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then ++ am__include=.include ++ am__quote="\"" ++ _am_result=BSD ++ fi ++fi ++AC_SUBST([am__include]) ++AC_SUBST([am__quote]) ++AC_MSG_RESULT([$_am_result]) ++rm -f confinc confmf + ]) + ++# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +-# AC_PROG_NM - find the path to a BSD-compatible name lister +-AC_DEFUN([AC_PROG_NM], +-[AC_MSG_CHECKING([for BSD-compatible nm]) +-AC_CACHE_VAL(lt_cv_path_NM, +-[if test -n "$NM"; then +- # Let the user override the test. +- lt_cv_path_NM="$NM" +-else +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" +- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do +- test -z "$ac_dir" && ac_dir=. +- tmp_nm=$ac_dir/${ac_tool_prefix}nm +- if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then +- # Check to see if the nm accepts a BSD-compat flag. +- # Adding the `sed 1q' prevents false positives on HP-UX, which says: +- # nm: unknown option "B" ignored +- # Tru64's nm complains that /dev/null is an invalid object file +- if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then +- lt_cv_path_NM="$tmp_nm -B" +- break +- elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then +- lt_cv_path_NM="$tmp_nm -p" +- break +- else +- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but +- continue # so that we can try to find one that supports BSD flags +- fi +- fi +- done +- IFS="$ac_save_ifs" +- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm +-fi]) +-NM="$lt_cv_path_NM" +-AC_MSG_RESULT([$NM]) +-]) ++# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 4 ++ ++# AM_MISSING_PROG(NAME, PROGRAM) ++# ------------------------------ ++AC_DEFUN([AM_MISSING_PROG], ++[AC_REQUIRE([AM_MISSING_HAS_RUN]) ++$1=${$1-"${am_missing_run}$2"} ++AC_SUBST($1)]) + +-# AC_CHECK_LIBM - check for math library +-AC_DEFUN([AC_CHECK_LIBM], +-[AC_REQUIRE([AC_CANONICAL_HOST])dnl +-LIBM= +-case $host in +-*-*-beos* | *-*-cygwin* | *-*-pw32*) +- # These system don't have libm +- ;; +-*-ncr-sysv4.3*) +- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") +- AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") +- ;; +-*) +- AC_CHECK_LIB(m, main, LIBM="-lm") +- ;; +-esac +-]) + +-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for +-# the libltdl convenience library and INCLTDL to the include flags for +-# the libltdl header and adds --enable-ltdl-convenience to the +-# configure arguments. Note that LIBLTDL and INCLTDL are not +-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not +-# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed +-# with '${top_builddir}/' and INCLTDL will be prefixed with +-# '${top_srcdir}/' (note the single quotes!). If your package is not +-# flat and you're not using automake, define top_builddir and +-# top_srcdir appropriately in the Makefiles. +-AC_DEFUN([AC_LIBLTDL_CONVENIENCE], +-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +- case $enable_ltdl_convenience in +- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; +- "") enable_ltdl_convenience=yes +- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; +- esac +- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la +- INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) ++# AM_MISSING_HAS_RUN ++# ------------------ ++# Define MISSING if not defined so far and test if it supports --run. ++# If it does, set am_missing_run to use it, otherwise, to nothing. ++AC_DEFUN([AM_MISSING_HAS_RUN], ++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ++test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" ++# Use eval to expand $SHELL ++if eval "$MISSING --run true"; then ++ am_missing_run="$MISSING --run " ++else ++ am_missing_run= ++ AC_MSG_WARN([`missing' script is too old or missing]) ++fi + ]) + +-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for +-# the libltdl installable library and INCLTDL to the include flags for +-# the libltdl header and adds --enable-ltdl-install to the configure +-# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is +-# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed +-# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will +-# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed +-# with '${top_srcdir}/' (note the single quotes!). If your package is +-# not flat and you're not using automake, define top_builddir and +-# top_srcdir appropriately in the Makefiles. +-# In the future, this macro may have to be called after AC_PROG_LIBTOOL. +-AC_DEFUN([AC_LIBLTDL_INSTALLABLE], +-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +- AC_CHECK_LIB(ltdl, main, +- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], +- [if test x"$enable_ltdl_install" = xno; then +- AC_MSG_WARN([libltdl not installed, but installation disabled]) +- else +- enable_ltdl_install=yes +- fi +- ]) +- if test x"$enable_ltdl_install" = x"yes"; then +- ac_configure_args="$ac_configure_args --enable-ltdl-install" +- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la +- INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) ++# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# AM_PROG_MKDIR_P ++# --------------- ++# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. ++# ++# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories ++# created by `make install' are always world readable, even if the ++# installer happens to have an overly restrictive umask (e.g. 077). ++# This was a mistake. There are at least two reasons why we must not ++# use `-m 0755': ++# - it causes special bits like SGID to be ignored, ++# - it may be too restrictive (some setups expect 775 directories). ++# ++# Do not use -m 0755 and let people choose whatever they expect by ++# setting umask. ++# ++# We cannot accept any implementation of `mkdir' that recognizes `-p'. ++# Some implementations (such as Solaris 8's) are not thread-safe: if a ++# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' ++# concurrently, both version can detect that a/ is missing, but only ++# one can create it and the other will error out. Consequently we ++# restrict ourselves to GNU make (using the --version option ensures ++# this.) ++AC_DEFUN([AM_PROG_MKDIR_P], ++[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then ++ # We used to keeping the `.' as first argument, in order to ++ # allow $(mkdir_p) to be used without argument. As in ++ # $(mkdir_p) $(somedir) ++ # where $(somedir) is conditionally defined. However this is wrong ++ # for two reasons: ++ # 1. if the package is installed by a user who cannot write `.' ++ # make install will fail, ++ # 2. the above comment should most certainly read ++ # $(mkdir_p) $(DESTDIR)$(somedir) ++ # so it does not work when $(somedir) is undefined and ++ # $(DESTDIR) is not. ++ # To support the latter case, we have to write ++ # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), ++ # so the `.' trick is pointless. ++ mkdir_p='mkdir -p --' ++else ++ # On NextStep and OpenStep, the `mkdir' command does not ++ # recognize any option. It will interpret all options as ++ # directories to create, and then abort because `.' already ++ # exists. ++ for d in ./-p ./--version; ++ do ++ test -d $d && rmdir $d ++ done ++ # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. ++ if test -f "$ac_aux_dir/mkinstalldirs"; then ++ mkdir_p='$(mkinstalldirs)' + else +- ac_configure_args="$ac_configure_args --enable-ltdl-install=no" +- LIBLTDL="-lltdl" +- INCLTDL= ++ mkdir_p='$(install_sh) -d' + fi +-]) ++fi ++AC_SUBST([mkdir_p])]) + +-# old names +-AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) +-AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +-AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) +-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) +-AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) +-AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) ++# Helper functions for option handling. -*- Autoconf -*- + +-# This is just to silence aclocal about the macro not being used +-ifelse([AC_DISABLE_FAST_INSTALL]) ++# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 3 ++ ++# _AM_MANGLE_OPTION(NAME) ++# ----------------------- ++AC_DEFUN([_AM_MANGLE_OPTION], ++[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) ++ ++# _AM_SET_OPTION(NAME) ++# ------------------------------ ++# Set option NAME. Presently that only means defining a flag for this option. ++AC_DEFUN([_AM_SET_OPTION], ++[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) ++ ++# _AM_SET_OPTIONS(OPTIONS) ++# ---------------------------------- ++# OPTIONS is a space-separated list of Automake options. ++AC_DEFUN([_AM_SET_OPTIONS], ++[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) ++ ++# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) ++# ------------------------------------------- ++# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. ++AC_DEFUN([_AM_IF_OPTION], ++[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) ++ ++# Check to make sure that the build environment is sane. -*- Autoconf -*- ++ ++# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 4 ++ ++# AM_SANITY_CHECK ++# --------------- ++AC_DEFUN([AM_SANITY_CHECK], ++[AC_MSG_CHECKING([whether build environment is sane]) ++# Just in case ++sleep 1 ++echo timestamp > conftest.file ++# Do `set' in a subshell so we don't clobber the current shell's ++# arguments. Must try -L first in case configure is actually a ++# symlink; some systems play weird games with the mod time of symlinks ++# (eg FreeBSD returns the mod time of the symlink's containing ++# directory). ++if ( ++ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` ++ if test "$[*]" = "X"; then ++ # -L didn't work. ++ set X `ls -t $srcdir/configure conftest.file` ++ fi ++ rm -f conftest.file ++ if test "$[*]" != "X $srcdir/configure conftest.file" \ ++ && test "$[*]" != "X conftest.file $srcdir/configure"; then ++ ++ # If neither matched, then we have a broken ls. This can happen ++ # if, for instance, CONFIG_SHELL is bash and it inherits a ++ # broken ls alias from the environment. This has actually ++ # happened. Such a system could not be considered "sane". ++ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken ++alias in your environment]) ++ fi ++ ++ test "$[2]" = conftest.file ++ ) ++then ++ # Ok. ++ : ++else ++ AC_MSG_ERROR([newly created file is older than distributed files! ++Check your system clock]) ++fi ++AC_MSG_RESULT(yes)]) ++ ++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# AM_PROG_INSTALL_STRIP ++# --------------------- ++# One issue with vendor `install' (even GNU) is that you can't ++# specify the program used to strip binaries. This is especially ++# annoying in cross-compiling environments, where the build's strip ++# is unlikely to handle the host's binaries. ++# Fortunately install-sh will honor a STRIPPROG variable, so we ++# always use install-sh in `make install-strip', and initialize ++# STRIPPROG with the value of the STRIP variable (set by the user). ++AC_DEFUN([AM_PROG_INSTALL_STRIP], ++[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl ++# Installed binaries are usually stripped using `strip' when the user ++# run `make install-strip'. However `strip' might not be the right ++# tool to use in cross-compilation environments, therefore Automake ++# will honor the `STRIP' environment variable to overrule this program. ++dnl Don't test for $cross_compiling = yes, because it might be `maybe'. ++if test "$cross_compiling" != no; then ++ AC_CHECK_TOOL([STRIP], [strip], :) ++fi ++INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" ++AC_SUBST([INSTALL_STRIP_PROGRAM])]) ++ ++# Check how to create a tarball. -*- Autoconf -*- ++ ++# Copyright (C) 2004, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 2 ++ ++# _AM_PROG_TAR(FORMAT) ++# -------------------- ++# Check how to create a tarball in format FORMAT. ++# FORMAT should be one of `v7', `ustar', or `pax'. ++# ++# Substitute a variable $(am__tar) that is a command ++# writing to stdout a FORMAT-tarball containing the directory ++# $tardir. ++# tardir=directory && $(am__tar) > result.tar ++# ++# Substitute a variable $(am__untar) that extract such ++# a tarball read from stdin. ++# $(am__untar) < result.tar ++AC_DEFUN([_AM_PROG_TAR], ++[# Always define AMTAR for backward compatibility. ++AM_MISSING_PROG([AMTAR], [tar]) ++m4_if([$1], [v7], ++ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], ++ [m4_case([$1], [ustar],, [pax],, ++ [m4_fatal([Unknown tar format])]) ++AC_MSG_CHECKING([how to create a $1 tar archive]) ++# Loop over all known methods to create a tar archive until one works. ++_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' ++_am_tools=${am_cv_prog_tar_$1-$_am_tools} ++# Do not fold the above two line into one, because Tru64 sh and ++# Solaris sh will not grok spaces in the rhs of `-'. ++for _am_tool in $_am_tools ++do ++ case $_am_tool in ++ gnutar) ++ for _am_tar in tar gnutar gtar; ++ do ++ AM_RUN_LOG([$_am_tar --version]) && break ++ done ++ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' ++ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' ++ am__untar="$_am_tar -xf -" ++ ;; ++ plaintar) ++ # Must skip GNU tar: if it does not support --format= it doesn't create ++ # ustar tarball either. ++ (tar --version) >/dev/null 2>&1 && continue ++ am__tar='tar chf - "$$tardir"' ++ am__tar_='tar chf - "$tardir"' ++ am__untar='tar xf -' ++ ;; ++ pax) ++ am__tar='pax -L -x $1 -w "$$tardir"' ++ am__tar_='pax -L -x $1 -w "$tardir"' ++ am__untar='pax -r' ++ ;; ++ cpio) ++ am__tar='find "$$tardir" -print | cpio -o -H $1 -L' ++ am__tar_='find "$tardir" -print | cpio -o -H $1 -L' ++ am__untar='cpio -i -H $1 -d' ++ ;; ++ none) ++ am__tar=false ++ am__tar_=false ++ am__untar=false ++ ;; ++ esac ++ ++ # If the value was cached, stop now. We just wanted to have am__tar ++ # and am__untar set. ++ test -n "${am_cv_prog_tar_$1}" && break ++ ++ # tar/untar a dummy directory, and stop if the command works ++ rm -rf conftest.dir ++ mkdir conftest.dir ++ echo GrepMe > conftest.dir/file ++ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) ++ rm -rf conftest.dir ++ if test -s conftest.tar; then ++ AM_RUN_LOG([$am__untar /dev/null 2>&1 && break ++ fi ++done ++rm -rf conftest.dir ++ ++AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) ++AC_MSG_RESULT([$am_cv_prog_tar_$1])]) ++AC_SUBST([am__tar]) ++AC_SUBST([am__untar]) ++]) # _AM_PROG_TAR + +Index: kxl-1.1.7/config.guess +=================================================================== +--- kxl-1.1.7.orig/config.guess 2003-01-02 05:05:20.000000000 +0100 ++++ kxl-1.1.7/config.guess 2006-02-25 16:29:12.000000000 +0100 +@@ -1,9 +1,9 @@ + #! /bin/sh + # Attempt to guess a canonical system name. +-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 +-# Free Software Foundation, Inc. ++# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, ++# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. + +-timestamp='2001-04-20' ++timestamp='2006-02-23' + + # This file is free software; you can redistribute it and/or modify it + # under the terms of the GNU General Public License as published by +@@ -17,15 +17,18 @@ + # + # You should have received a copy of the GNU General Public License + # along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA ++# 02110-1301, USA. + # + # As a special exception to the GNU General Public License, if you + # distribute this file as part of a program that contains a + # configuration script generated by Autoconf, you may include it under + # the same distribution terms that you use for the rest of that program. + +-# Written by Per Bothner . +-# Please send patches to . ++ ++# Originally written by Per Bothner . ++# Please send patches to . Submit a context ++# diff and a properly formatted ChangeLog entry. + # + # This script attempts to guess a canonical system name similar to + # config.sub. If it succeeds, it prints the system name on stdout, and +@@ -52,7 +55,7 @@ + GNU config.guess ($timestamp) + + Originally written by Per Bothner. +-Copyright (C) 1992, 93, 94, 95, 96, 97, 98, 99, 2000 ++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 + Free Software Foundation, Inc. + + This is free software; see the source for copying conditions. There is NO +@@ -65,11 +68,11 @@ + while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) +- echo "$timestamp" ; exit 0 ;; ++ echo "$timestamp" ; exit ;; + --version | -v ) +- echo "$version" ; exit 0 ;; ++ echo "$version" ; exit ;; + --help | --h* | -h ) +- echo "$usage"; exit 0 ;; ++ echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. +@@ -87,33 +90,45 @@ + exit 1 + fi + ++trap 'exit 1' 1 2 15 + +-dummy=dummy-$$ +-trap 'rm -f $dummy.c $dummy.o $dummy.rel $dummy; exit 1' 1 2 15 ++# CC_FOR_BUILD -- compiler used by this script. Note that the use of a ++# compiler to aid in system detection is discouraged as it requires ++# temporary files to be created and, as you can see below, it is a ++# headache to deal with in a portable fashion. + +-# CC_FOR_BUILD -- compiler used by this script. + # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still + # use `HOST_CC' if defined, but it is deprecated. + ++# Portable tmp directory creation inspired by the Autoconf team. ++ ++set_cc_for_build=' ++trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; ++trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; ++: ${TMPDIR=/tmp} ; ++ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || ++ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || ++ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || ++ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; ++dummy=$tmp/dummy ; ++tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; + case $CC_FOR_BUILD,$HOST_CC,$CC in +- ,,) echo "int dummy(){}" > $dummy.c +- for c in cc gcc c89 ; do +- ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1 +- if test $? = 0 ; then +- CC_FOR_BUILD="$c"; break +- fi +- done +- rm -f $dummy.c $dummy.o $dummy.rel ++ ,,) echo "int x;" > $dummy.c ; ++ for c in cc gcc c89 c99 ; do ++ if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then ++ CC_FOR_BUILD="$c"; break ; ++ fi ; ++ done ; + if test x"$CC_FOR_BUILD" = x ; then +- CC_FOR_BUILD=no_compiler_found ++ CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +-esac ++esac ; set_cc_for_build= ;' + + # This is needed to find uname on a Pyramid OSx when run in the BSD universe. +-# (ghazi@noc.rutgers.edu 8/24/94.) ++# (ghazi@noc.rutgers.edu 1994-08-24) + if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH + fi +@@ -127,29 +142,31 @@ + + case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) +- # Netbsd (nbsd) targets should (where applicable) match one or ++ # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. +- # Determine the machine/vendor (is the vendor relevant). +- case "${UNAME_MACHINE}" in +- amiga) machine=m68k-unknown ;; +- arm32) machine=arm-unknown ;; +- atari*) machine=m68k-atari ;; +- sun3*) machine=m68k-sun ;; +- mac68k) machine=m68k-apple ;; +- macppc) machine=powerpc-apple ;; +- hp3[0-9][05]) machine=m68k-hp ;; +- ibmrt|romp-ibm) machine=romp-ibm ;; +- *) machine=${UNAME_MACHINE}-unknown ;; ++ # ++ # Note: NetBSD doesn't particularly care about the vendor ++ # portion of the name. We always set it to "unknown". ++ sysctl="sysctl -n hw.machine_arch" ++ UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ ++ /usr/sbin/$sysctl 2>/dev/null || echo unknown)` ++ case "${UNAME_MACHINE_ARCH}" in ++ armeb) machine=armeb-unknown ;; ++ arm*) machine=arm-unknown ;; ++ sh3el) machine=shl-unknown ;; ++ sh3eb) machine=sh-unknown ;; ++ *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. +- case "${UNAME_MACHINE}" in +- i386|sparc|amiga|arm*|hp300|mvme68k|vax|atari|luna68k|mac68k|news68k|next68k|pc532|sun3*|x68k) ++ case "${UNAME_MACHINE_ARCH}" in ++ arm*|i386|m68k|ns32k|sh3*|sparc|vax) ++ eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep __ELF__ >/dev/null + then +@@ -165,116 +182,128 @@ + ;; + esac + # The OS release +- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` ++ # Debian GNU/NetBSD machines have a different userland, and ++ # thus, need a distinct triplet. However, they do not need ++ # kernel version information, so it can be replaced with a ++ # suitable tag, in the style of linux-gnu. ++ case "${UNAME_VERSION}" in ++ Debian*) ++ release='-gnu' ++ ;; ++ *) ++ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` ++ ;; ++ esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" +- exit 0 ;; ++ exit ;; ++ *:OpenBSD:*:*) ++ UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` ++ echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} ++ exit ;; ++ *:ekkoBSD:*:*) ++ echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} ++ exit ;; ++ *:SolidBSD:*:*) ++ echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} ++ exit ;; ++ macppc:MirBSD:*:*) ++ echo powerppc-unknown-mirbsd${UNAME_RELEASE} ++ exit ;; ++ *:MirBSD:*:*) ++ echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} ++ exit ;; + alpha:OSF1:*:*) +- if test $UNAME_RELEASE = "V4.0"; then ++ case $UNAME_RELEASE in ++ *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` +- fi ++ ;; ++ *5.*) ++ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` ++ ;; ++ esac ++ # According to Compaq, /usr/sbin/psrinfo has been available on ++ # OSF/1 and Tru64 systems produced since 1995. I hope that ++ # covers most systems running today. This code pipes the CPU ++ # types through head -n 1, so we only detect the type of CPU 0. ++ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` ++ case "$ALPHA_CPU_TYPE" in ++ "EV4 (21064)") ++ UNAME_MACHINE="alpha" ;; ++ "EV4.5 (21064)") ++ UNAME_MACHINE="alpha" ;; ++ "LCA4 (21066/21068)") ++ UNAME_MACHINE="alpha" ;; ++ "EV5 (21164)") ++ UNAME_MACHINE="alphaev5" ;; ++ "EV5.6 (21164A)") ++ UNAME_MACHINE="alphaev56" ;; ++ "EV5.6 (21164PC)") ++ UNAME_MACHINE="alphapca56" ;; ++ "EV5.7 (21164PC)") ++ UNAME_MACHINE="alphapca57" ;; ++ "EV6 (21264)") ++ UNAME_MACHINE="alphaev6" ;; ++ "EV6.7 (21264A)") ++ UNAME_MACHINE="alphaev67" ;; ++ "EV6.8CB (21264C)") ++ UNAME_MACHINE="alphaev68" ;; ++ "EV6.8AL (21264B)") ++ UNAME_MACHINE="alphaev68" ;; ++ "EV6.8CX (21264D)") ++ UNAME_MACHINE="alphaev68" ;; ++ "EV6.9A (21264/EV69A)") ++ UNAME_MACHINE="alphaev69" ;; ++ "EV7 (21364)") ++ UNAME_MACHINE="alphaev7" ;; ++ "EV7.9 (21364A)") ++ UNAME_MACHINE="alphaev79" ;; ++ esac ++ # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. +- cat <$dummy.s +- .data +-\$Lformat: +- .byte 37,100,45,37,120,10,0 # "%d-%x\n" +- +- .text +- .globl main +- .align 4 +- .ent main +-main: +- .frame \$30,16,\$26,0 +- ldgp \$29,0(\$27) +- .prologue 1 +- .long 0x47e03d80 # implver \$0 +- lda \$2,-1 +- .long 0x47e20c21 # amask \$2,\$1 +- lda \$16,\$Lformat +- mov \$0,\$17 +- not \$1,\$18 +- jsr \$26,printf +- ldgp \$29,0(\$26) +- mov 0,\$16 +- jsr \$26,exit +- .end main +-EOF +- $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null +- if test "$?" = 0 ; then +- case `./$dummy` in +- 0-0) +- UNAME_MACHINE="alpha" +- ;; +- 1-0) +- UNAME_MACHINE="alphaev5" +- ;; +- 1-1) +- UNAME_MACHINE="alphaev56" +- ;; +- 1-101) +- UNAME_MACHINE="alphapca56" +- ;; +- 2-303) +- UNAME_MACHINE="alphaev6" +- ;; +- 2-307) +- UNAME_MACHINE="alphaev67" +- ;; +- esac +- fi +- rm -f $dummy.s $dummy +- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` +- exit 0 ;; ++ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` ++ exit ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix +- exit 0 ;; ++ exit ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 +- exit 0 ;; ++ exit ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 +- exit 0;; +- amiga:OpenBSD:*:*) +- echo m68k-unknown-openbsd${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos +- exit 0 ;; +- arc64:OpenBSD:*:*) +- echo mips64el-unknown-openbsd${UNAME_RELEASE} +- exit 0 ;; +- arc:OpenBSD:*:*) +- echo mipsel-unknown-openbsd${UNAME_RELEASE} +- exit 0 ;; +- hkmips:OpenBSD:*:*) +- echo mips-unknown-openbsd${UNAME_RELEASE} +- exit 0 ;; +- pmax:OpenBSD:*:*) +- echo mipsel-unknown-openbsd${UNAME_RELEASE} +- exit 0 ;; +- sgi:OpenBSD:*:*) +- echo mips-unknown-openbsd${UNAME_RELEASE} +- exit 0 ;; +- wgrisc:OpenBSD:*:*) +- echo mipsel-unknown-openbsd${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; ++ *:[Mm]orph[Oo][Ss]:*:*) ++ echo ${UNAME_MACHINE}-unknown-morphos ++ exit ;; + *:OS/390:*:*) + echo i370-ibm-openedition +- exit 0 ;; ++ exit ;; ++ *:z/VM:*:*) ++ echo s390-ibm-zvmoe ++ exit ;; ++ *:OS400:*:*) ++ echo powerpc-ibm-os400 ++ exit ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} +- exit 0;; ++ exit ;; ++ arm:riscos:*:*|arm:RISCOS:*:*) ++ echo arm-unknown-riscos ++ exit ;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp +- exit 0;; ++ exit ;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then +@@ -282,25 +311,32 @@ + else + echo pyramid-pyramid-bsd + fi +- exit 0 ;; ++ exit ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 +- exit 0 ;; ++ exit ;; ++ DRS?6000:unix:4.0:6*) ++ echo sparc-icl-nx6 ++ exit ;; ++ DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) ++ case `/usr/bin/uname -p` in ++ sparc) echo sparc-icl-nx7; exit ;; ++ esac ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` +- exit 0 ;; ++ exit ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` +- exit 0 ;; ++ exit ;; + i86pc:SunOS:5.*:*) + echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` +- exit 0 ;; ++ exit ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` +- exit 0 ;; ++ exit ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) +@@ -309,12 +345,12 @@ + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` +- exit 0 ;; ++ exit ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + sun*:*:4.2BSD:*) +- UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` ++ UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) +@@ -324,13 +360,10 @@ + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac +- exit 0 ;; ++ exit ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} +- exit 0 ;; +- atari*:OpenBSD:*:*) +- echo m68k-unknown-openbsd${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor +@@ -341,50 +374,42 @@ + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} +- exit 0 ;; +- sun3*:OpenBSD:*:*) +- echo m68k-unknown-openbsd${UNAME_RELEASE} +- exit 0 ;; +- mac68k:OpenBSD:*:*) +- echo m68k-unknown-openbsd${UNAME_RELEASE} +- exit 0 ;; +- mvme68k:OpenBSD:*:*) +- echo m68k-unknown-openbsd${UNAME_RELEASE} +- exit 0 ;; +- mvme88k:OpenBSD:*:*) +- echo m88k-unknown-openbsd${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; ++ m68k:machten:*:*) ++ echo m68k-apple-machten${UNAME_RELEASE} ++ exit ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 +- exit 0 ;; ++ exit ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + mips:*:*:UMIPS | mips:*:*:RISCos) ++ eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #ifdef __cplusplus + #include /* for printf() prototype */ +@@ -406,27 +431,33 @@ + exit (-1); + } + EOF +- $CC_FOR_BUILD $dummy.c -o $dummy \ +- && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ +- && rm -f $dummy.c $dummy && exit 0 +- rm -f $dummy.c $dummy ++ $CC_FOR_BUILD -o $dummy $dummy.c && ++ dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && ++ SYSTEM_NAME=`$dummy $dummyarg` && ++ { echo "$SYSTEM_NAME"; exit; } + echo mips-mips-riscos${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax +- exit 0 ;; ++ exit ;; ++ Motorola:*:4.3:PL8-*) ++ echo powerpc-harris-powermax ++ exit ;; ++ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) ++ echo powerpc-harris-powermax ++ exit ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix +- exit 0 ;; ++ exit ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 +- exit 0 ;; ++ exit ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 +- exit 0 ;; ++ exit ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 +- exit 0 ;; ++ exit ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` +@@ -442,29 +473,29 @@ + else + echo i586-dg-dgux${UNAME_RELEASE} + fi +- exit 0 ;; ++ exit ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 +- exit 0 ;; ++ exit ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 +- exit 0 ;; ++ exit ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 +- exit 0 ;; ++ exit ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd +- exit 0 ;; ++ exit ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` +- exit 0 ;; ++ exit ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. +- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id +- exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' ++ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id ++ exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix +- exit 0 ;; ++ exit ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` +@@ -472,9 +503,10 @@ + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} +- exit 0 ;; ++ exit ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then ++ eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + +@@ -486,17 +518,20 @@ + exit(0); + } + EOF +- $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0 +- rm -f $dummy.c $dummy +- echo rs6000-ibm-aix3.2.5 ++ if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` ++ then ++ echo "$SYSTEM_NAME" ++ else ++ echo rs6000-ibm-aix3.2.5 ++ fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi +- exit 0 ;; ++ exit ;; + *:AIX:*:[45]) +- IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'` ++ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else +@@ -508,38 +543,36 @@ + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} +- exit 0 ;; ++ exit ;; + *:AIX:*:*) + echo rs6000-ibm-aix +- exit 0 ;; ++ exit ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 +- exit 0 ;; ++ exit ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to +- exit 0 ;; # report: romp-ibm BSD 4.3 ++ exit ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx +- exit 0 ;; ++ exit ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 +- exit 0 ;; ++ exit ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd +- exit 0 ;; ++ exit ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 +- exit 0 ;; ++ exit ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) +- case "${HPUX_REV}" in +- 11.[0-9][0-9]) +- if [ -x /usr/bin/getconf ]; then +- sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` ++ if [ -x /usr/bin/getconf ]; then ++ sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 +@@ -548,12 +581,13 @@ + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; ++ '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + esac ;; + esac +- fi ;; +- esac +- if [ "${HP_ARCH}" = "" ]; then +- sed 's/^ //' << EOF >$dummy.c ++ fi ++ if [ "${HP_ARCH}" = "" ]; then ++ eval $set_cc_for_build ++ sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include +@@ -586,18 +620,39 @@ + exit (0); + } + EOF +- (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy` +- if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi +- rm -f $dummy.c $dummy +- fi ;; ++ (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` ++ test -z "$HP_ARCH" && HP_ARCH=hppa ++ fi ;; + esac ++ if [ ${HP_ARCH} = "hppa2.0w" ] ++ then ++ eval $set_cc_for_build ++ ++ # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating ++ # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler ++ # generating 64-bit code. GNU and HP use different nomenclature: ++ # ++ # $ CC_FOR_BUILD=cc ./config.guess ++ # => hppa2.0w-hp-hpux11.23 ++ # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess ++ # => hppa64-hp-hpux11.23 ++ ++ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | ++ grep __LP64__ >/dev/null ++ then ++ HP_ARCH="hppa2.0w" ++ else ++ HP_ARCH="hppa64" ++ fi ++ fi + echo ${HP_ARCH}-hp-hpux${HPUX_REV} +- exit 0 ;; ++ exit ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} +- exit 0 ;; ++ exit ;; + 3050*:HI-UX:*:*) ++ eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + int +@@ -623,239 +678,246 @@ + exit (0); + } + EOF +- $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0 +- rm -f $dummy.c $dummy ++ $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && ++ { echo "$SYSTEM_NAME"; exit; } + echo unknown-hitachi-hiuxwe2 +- exit 0 ;; ++ exit ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd +- exit 0 ;; ++ exit ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd +- exit 0 ;; +- *9??*:MPE/iX:*:*) ++ exit ;; ++ *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix +- exit 0 ;; ++ exit ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf +- exit 0 ;; ++ exit ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf +- exit 0 ;; ++ exit ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi +- exit 0 ;; ++ exit ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites +- exit 0 ;; +- hppa*:OpenBSD:*:*) +- echo hppa-unknown-openbsd +- exit 0 ;; ++ exit ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd +- exit 0 ;; ++ exit ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi +- exit 0 ;; ++ exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd +- exit 0 ;; ++ exit ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd +- exit 0 ;; ++ exit ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd +- exit 0 ;; +- CRAY*X-MP:*:*:*) +- echo xmp-cray-unicos +- exit 0 ;; ++ exit ;; + CRAY*Y-MP:*:*:*) +- echo ymp-cray-unicos${UNAME_RELEASE} +- exit 0 ;; ++ echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' ++ exit ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ +- -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ +- exit 0 ;; ++ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ ++ -e 's/\.[^.]*$/.X/' ++ exit ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' +- exit 0 ;; +- CRAY*T3D:*:*:*) +- echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' +- exit 0 ;; ++ exit ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' +- exit 0 ;; ++ exit ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' +- exit 0 ;; +- CRAY-2:*:*:*) +- echo cray2-cray-unicos +- exit 0 ;; ++ exit ;; ++ *:UNICOS/mp:*:*) ++ echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' ++ exit ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" +- exit 0 ;; +- hp300:OpenBSD:*:*) +- echo m68k-unknown-openbsd${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; ++ 5000:UNIX_System_V:4.*:*) ++ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` ++ FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` ++ echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" ++ exit ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + *:FreeBSD:*:*) +- echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` +- exit 0 ;; +- *:OpenBSD:*:*) +- echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` +- exit 0 ;; ++ case ${UNAME_MACHINE} in ++ pc98) ++ echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; ++ *) ++ echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; ++ esac ++ exit ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin +- exit 0 ;; ++ exit ;; + i*:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 +- exit 0 ;; ++ exit ;; ++ i*:MSYS_NT-*:*:*) ++ echo ${UNAME_MACHINE}-pc-mingw32 ++ exit ;; ++ i*:windows32*:*) ++ # uname -m includes "-pc" on this system. ++ echo ${UNAME_MACHINE}-mingw32 ++ exit ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 +- exit 0 ;; ++ exit ;; ++ x86:Interix*:[345]*) ++ echo i586-pc-interix${UNAME_RELEASE} ++ exit ;; ++ EM64T:Interix*:[345]*) ++ echo x86_64-unknown-interix${UNAME_RELEASE} ++ exit ;; ++ [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) ++ echo i${UNAME_MACHINE}-pc-mks ++ exit ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? +- echo i386-pc-interix +- exit 0 ;; ++ echo i586-pc-interix ++ exit ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin +- exit 0 ;; ++ exit ;; ++ amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) ++ echo x86_64-unknown-cygwin ++ exit ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin +- exit 0 ;; ++ exit ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` +- exit 0 ;; ++ exit ;; + *:GNU:*:*) ++ # the GNU system + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` +- exit 0 ;; ++ exit ;; ++ *:GNU/*:*:*) ++ # other systems with GNU libc and userland ++ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu ++ exit ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix +- exit 0 ;; ++ exit ;; + arm*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu +- exit 0 ;; ++ exit ;; ++ cris:Linux:*:*) ++ echo cris-axis-linux-gnu ++ exit ;; ++ crisv32:Linux:*:*) ++ echo crisv32-axis-linux-gnu ++ exit ;; ++ frv:Linux:*:*) ++ echo frv-unknown-linux-gnu ++ exit ;; + ia64:Linux:*:*) +- echo ${UNAME_MACHINE}-unknown-linux +- exit 0 ;; ++ echo ${UNAME_MACHINE}-unknown-linux-gnu ++ exit ;; ++ m32r*:Linux:*:*) ++ echo ${UNAME_MACHINE}-unknown-linux-gnu ++ exit ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu +- exit 0 ;; ++ exit ;; + mips:Linux:*:*) +- cat >$dummy.c < /* for printf() prototype */ +-int main (int argc, char *argv[]) { +-#else +-int main (argc, argv) int argc; char *argv[]; { +-#endif +-#ifdef __MIPSEB__ +- printf ("%s-unknown-linux-gnu\n", argv[1]); +-#endif +-#ifdef __MIPSEL__ +- printf ("%sel-unknown-linux-gnu\n", argv[1]); +-#endif +- return 0; +-} ++ eval $set_cc_for_build ++ sed 's/^ //' << EOF >$dummy.c ++ #undef CPU ++ #undef mips ++ #undef mipsel ++ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) ++ CPU=mipsel ++ #else ++ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) ++ CPU=mips ++ #else ++ CPU= ++ #endif ++ #endif + EOF +- $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm -f $dummy.c $dummy && exit 0 +- rm -f $dummy.c $dummy ++ eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' ++ /^CPU/{ ++ s: ::g ++ p ++ }'`" ++ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + ;; +- ppc:Linux:*:*) +- # Determine Lib Version +- cat >$dummy.c < +-#if defined(__GLIBC__) +-extern char __libc_version[]; +-extern char __libc_release[]; +-#endif +-main(argc, argv) +- int argc; +- char *argv[]; +-{ +-#if defined(__GLIBC__) +- printf("%s %s\n", __libc_version, __libc_release); +-#else +- printf("unknown\n"); +-#endif +- return 0; +-} ++ mips64:Linux:*:*) ++ eval $set_cc_for_build ++ sed 's/^ //' << EOF >$dummy.c ++ #undef CPU ++ #undef mips64 ++ #undef mips64el ++ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) ++ CPU=mips64el ++ #else ++ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) ++ CPU=mips64 ++ #else ++ CPU= ++ #endif ++ #endif + EOF +- LIBC="" +- $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null +- if test "$?" = 0 ; then +- ./$dummy | grep 1\.99 > /dev/null +- if test "$?" = 0 ; then LIBC="libc1" ; fi +- fi +- rm -f $dummy.c $dummy +- echo powerpc-unknown-linux-gnu${LIBC} +- exit 0 ;; ++ eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' ++ /^CPU/{ ++ s: ::g ++ p ++ }'`" ++ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ++ ;; ++ or32:Linux:*:*) ++ echo or32-unknown-linux-gnu ++ exit ;; ++ ppc:Linux:*:*) ++ echo powerpc-unknown-linux-gnu ++ exit ;; ++ ppc64:Linux:*:*) ++ echo powerpc64-unknown-linux-gnu ++ exit ;; + alpha:Linux:*:*) +- cat <$dummy.s +- .data +- \$Lformat: +- .byte 37,100,45,37,120,10,0 # "%d-%x\n" +- .text +- .globl main +- .align 4 +- .ent main +- main: +- .frame \$30,16,\$26,0 +- ldgp \$29,0(\$27) +- .prologue 1 +- .long 0x47e03d80 # implver \$0 +- lda \$2,-1 +- .long 0x47e20c21 # amask \$2,\$1 +- lda \$16,\$Lformat +- mov \$0,\$17 +- not \$1,\$18 +- jsr \$26,printf +- ldgp \$29,0(\$26) +- mov 0,\$16 +- jsr \$26,exit +- .end main +-EOF +- LIBC="" +- $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null +- if test "$?" = 0 ; then +- case `./$dummy` in +- 0-0) UNAME_MACHINE="alpha" ;; +- 1-0) UNAME_MACHINE="alphaev5" ;; +- 1-1) UNAME_MACHINE="alphaev56" ;; +- 1-101) UNAME_MACHINE="alphapca56" ;; +- 2-303) UNAME_MACHINE="alphaev6" ;; +- 2-307) UNAME_MACHINE="alphaev67" ;; +- esac +- objdump --private-headers $dummy | \ +- grep ld.so.1 > /dev/null +- if test "$?" = 0 ; then +- LIBC="libc1" +- fi +- fi +- rm -f $dummy.s $dummy ++ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in ++ EV5) UNAME_MACHINE=alphaev5 ;; ++ EV56) UNAME_MACHINE=alphaev56 ;; ++ PCA56) UNAME_MACHINE=alphapca56 ;; ++ PCA57) UNAME_MACHINE=alphapca56 ;; ++ EV6) UNAME_MACHINE=alphaev6 ;; ++ EV67) UNAME_MACHINE=alphaev67 ;; ++ EV68*) UNAME_MACHINE=alphaev68 ;; ++ esac ++ objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null ++ if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} +- exit 0 ;; ++ exit ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in +@@ -863,93 +925,97 @@ + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac +- exit 0 ;; ++ exit ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu +- exit 0 ;; ++ exit ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux +- exit 0 ;; ++ exit ;; ++ sh64*:Linux:*:*) ++ echo ${UNAME_MACHINE}-unknown-linux-gnu ++ exit ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu +- exit 0 ;; ++ exit ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu +- exit 0 ;; ++ exit ;; ++ vax:Linux:*:*) ++ echo ${UNAME_MACHINE}-dec-linux-gnu ++ exit ;; + x86_64:Linux:*:*) + echo x86_64-unknown-linux-gnu +- exit 0 ;; ++ exit ;; + i*86:Linux:*:*) + # The BFD linker knows what the default object file format is, so + # first see if it will tell us. cd to the root directory to prevent + # problems with other programs or directories called `ld' in the path. +- ld_supported_emulations=`cd /; ld --help 2>&1 \ +- | sed -ne '/supported emulations:/!d ++ # Set LC_ALL=C to ensure ld outputs messages in English. ++ ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ ++ | sed -ne '/supported targets:/!d + s/[ ][ ]*/ /g +- s/.*supported emulations: *// ++ s/.*supported targets: *// + s/ .*// + p'` +- case "$ld_supported_emulations" in +- i*86linux) +- echo "${UNAME_MACHINE}-pc-linux-gnuaout" +- exit 0 +- ;; +- elf_i*86) ++ case "$ld_supported_targets" in ++ elf32-i386) + TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" + ;; +- i*86coff) ++ a.out-i386-linux) ++ echo "${UNAME_MACHINE}-pc-linux-gnuaout" ++ exit ;; ++ coff-i386) + echo "${UNAME_MACHINE}-pc-linux-gnucoff" +- exit 0 +- ;; +- esac +- # Either a pre-BFD a.out linker (linux-gnuoldld) +- # or one that does not give us useful --help. +- # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout. +- # If ld does not provide *any* "supported emulations:" +- # that means it is gnuoldld. +- test -z "$ld_supported_emulations" && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0 +- case "${UNAME_MACHINE}" in +- i*86) +- VENDOR=pc; +- ;; +- *) +- VENDOR=unknown; +- ;; ++ exit ;; ++ "") ++ # Either a pre-BFD a.out linker (linux-gnuoldld) or ++ # one that does not give us useful --help. ++ echo "${UNAME_MACHINE}-pc-linux-gnuoldld" ++ exit ;; + esac + # Determine whether the default compiler is a.out or elf +- cat >$dummy.c < +-#ifdef __cplusplus +-#include /* for printf() prototype */ +- int main (int argc, char *argv[]) { +-#else +- int main (argc, argv) int argc; char *argv[]; { +-#endif +-#ifdef __ELF__ +-# ifdef __GLIBC__ +-# if __GLIBC__ >= 2 +- printf ("%s-${VENDOR}-linux-gnu\n", argv[1]); +-# else +- printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]); +-# endif +-# else +- printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]); +-# endif +-#else +- printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]); +-#endif +- return 0; +-} ++ eval $set_cc_for_build ++ sed 's/^ //' << EOF >$dummy.c ++ #include ++ #ifdef __ELF__ ++ # ifdef __GLIBC__ ++ # if __GLIBC__ >= 2 ++ LIBC=gnu ++ # else ++ LIBC=gnulibc1 ++ # endif ++ # else ++ LIBC=gnulibc1 ++ # endif ++ #else ++ #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__sun) ++ LIBC=gnu ++ #else ++ LIBC=gnuaout ++ #endif ++ #endif ++ #ifdef __dietlibc__ ++ LIBC=dietlibc ++ #endif + EOF +- $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm -f $dummy.c $dummy && exit 0 +- rm -f $dummy.c $dummy +- test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 ++ eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' ++ /^LIBC/{ ++ s: ::g ++ p ++ }'`" ++ test x"${LIBC}" != x && { ++ echo "${UNAME_MACHINE}-pc-linux-${LIBC}" ++ exit ++ } ++ test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } + ;; +-# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions +-# are messed up and put the nodename in both sysname and nodename. + i*86:DYNIX/ptx:4*:*) ++ # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. ++ # earlier versions are messed up and put the nodename in both ++ # sysname and nodename. + echo i386-sequent-sysv4 +- exit 0 ;; ++ exit ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... +@@ -957,7 +1023,27 @@ + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} +- exit 0 ;; ++ exit ;; ++ i*86:OS/2:*:*) ++ # If we were able to find `uname', then EMX Unix compatibility ++ # is probably installed. ++ echo ${UNAME_MACHINE}-pc-os2-emx ++ exit ;; ++ i*86:XTS-300:*:STOP) ++ echo ${UNAME_MACHINE}-unknown-stop ++ exit ;; ++ i*86:atheos:*:*) ++ echo ${UNAME_MACHINE}-unknown-atheos ++ exit ;; ++ i*86:syllable:*:*) ++ echo ${UNAME_MACHINE}-pc-syllable ++ exit ;; ++ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) ++ echo i386-unknown-lynxos${UNAME_RELEASE} ++ exit ;; ++ i*86:*DOS:*:*) ++ echo ${UNAME_MACHINE}-pc-msdosdjgpp ++ exit ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then +@@ -965,100 +1051,100 @@ + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi +- exit 0 ;; +- i*86:*:5:7*) +- # Fixed at (any) Pentium or better +- UNAME_MACHINE=i586 +- if [ ${UNAME_SYSTEM} = "UnixWare" ] ; then +- echo ${UNAME_MACHINE}-sco-sysv${UNAME_RELEASE}uw${UNAME_VERSION} +- else +- echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE} +- fi +- exit 0 ;; ++ exit ;; ++ i*86:*:5:[678]*) ++ # UnixWare 7.x, OpenUNIX and OpenServer 6. ++ case `/bin/uname -X | grep "^Machine"` in ++ *486*) UNAME_MACHINE=i486 ;; ++ *Pentium) UNAME_MACHINE=i586 ;; ++ *Pent*|*Celeron) UNAME_MACHINE=i686 ;; ++ esac ++ echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} ++ exit ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then +- UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')` +- (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486 +- (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \ ++ UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` ++ (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 ++ (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 +- (/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \ ++ (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 +- (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \ ++ (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi +- exit 0 ;; +- i*86:*DOS:*:*) +- echo ${UNAME_MACHINE}-pc-msdosdjgpp +- exit 0 ;; ++ exit ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i386. + echo i386-pc-msdosdjgpp +- exit 0 ;; ++ exit ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 +- exit 0 ;; ++ exit ;; + paragon:*:*:*) + echo i860-intel-osf1 +- exit 0 ;; ++ exit ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi +- exit 0 ;; ++ exit ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv +- exit 0 ;; +- M68*:*:R3V[567]*:*) +- test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; +- 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0) ++ exit ;; ++ mc68k:UNIX:SYSTEM5:3.51m) ++ echo m68k-convergent-sysv ++ exit ;; ++ M680?0:D-NIX:5.3:*) ++ echo m68k-diab-dnix ++ exit ;; ++ M68*:*:R3V[5678]*:*) ++ test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; ++ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ +- && echo i486-ncr-sysv4.3${OS_REL} && exit 0 ++ && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ +- && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; ++ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ +- && echo i486-ncr-sysv4 && exit 0 ;; ++ && { echo i486-ncr-sysv4; exit; } ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 +- exit 0 ;; +- i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) +- echo i386-unknown-lynxos${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 +- exit 0 ;; ++ exit ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 +- exit 0 ;; ++ exit ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` +@@ -1066,78 +1152,98 @@ + else + echo ns32k-sni-sysv + fi +- exit 0 ;; +- PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort +- # says ++ exit ;; ++ PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort ++ # says + echo i586-unisys-sysv4 +- exit 0 ;; ++ exit ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 +- exit 0 ;; ++ exit ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 +- exit 0 ;; ++ exit ;; ++ i*86:VOS:*:*) ++ # From Paul.Green@stratus.com. ++ echo ${UNAME_MACHINE}-stratus-vos ++ exit ;; ++ *:VOS:*:*) ++ # From Paul.Green@stratus.com. ++ echo hppa1.1-stratus-vos ++ exit ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 +- exit 0 ;; ++ exit ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi +- exit 0 ;; ++ exit ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos +- exit 0 ;; ++ exit ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos +- exit 0 ;; ++ exit ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos +- exit 0 ;; ++ exit ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; ++ SX-6:SUPER-UX:*:*) ++ echo sx6-nec-superux${UNAME_RELEASE} ++ exit ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + *:Darwin:*:*) +- echo `uname -p`-apple-darwin${UNAME_RELEASE} +- exit 0 ;; ++ UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown ++ case $UNAME_PROCESSOR in ++ unknown) UNAME_PROCESSOR=powerpc ;; ++ esac ++ echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} ++ exit ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) +- if test "${UNAME_MACHINE}" = "x86pc"; then ++ UNAME_PROCESSOR=`uname -p` ++ if test "$UNAME_PROCESSOR" = "x86"; then ++ UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi +- echo `uname -p`-${UNAME_MACHINE}-nto-qnx +- exit 0 ;; ++ echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} ++ exit ;; + *:QNX:*:4*) + echo i386-pc-qnx +- exit 0 ;; +- NSR-[KW]:NONSTOP_KERNEL:*:*) ++ exit ;; ++ NSE-?:NONSTOP_KERNEL:*:*) ++ echo nse-tandem-nsk${UNAME_RELEASE} ++ exit ;; ++ NSR-?:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux +- exit 0 ;; ++ exit ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv +- exit 0 ;; ++ exit ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 +@@ -1148,35 +1254,53 @@ + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 +- exit 0 ;; +- i*86:OS/2:*:*) +- # If we were able to find `uname', then EMX Unix compatibility +- # is probably installed. +- echo ${UNAME_MACHINE}-pc-os2-emx +- exit 0 ;; ++ exit ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 +- exit 0 ;; ++ exit ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex +- exit 0 ;; ++ exit ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 +- exit 0 ;; ++ exit ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 +- exit 0 ;; ++ exit ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 +- exit 0 ;; ++ exit ;; + *:ITS:*:*) + echo pdp10-unknown-its +- exit 0 ;; ++ exit ;; ++ SEI:*:*:SEIUX) ++ echo mips-sei-seiux${UNAME_RELEASE} ++ exit ;; ++ *:DragonFly:*:*) ++ echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ++ exit ;; ++ *:*VMS:*:*) ++ UNAME_MACHINE=`(uname -p) 2>/dev/null` ++ case "${UNAME_MACHINE}" in ++ A*) echo alpha-dec-vms ; exit ;; ++ I*) echo ia64-dec-vms ; exit ;; ++ V*) echo vax-dec-vms ; exit ;; ++ esac ;; ++ *:XENIX:*:SysV) ++ echo i386-pc-xenix ++ exit ;; ++ i*86:skyos:*:*) ++ echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' ++ exit ;; ++ i*86:rdos:*:*) ++ echo ${UNAME_MACHINE}-pc-rdos ++ exit ;; + esac + + #echo '(No uname command or uname output not recognized.)' 1>&2 + #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 + ++eval $set_cc_for_build + cat >$dummy.c < +@@ -1202,7 +1326,7 @@ + #endif + + #if defined (__arm) && defined (__acorn) && defined (__unix) +- printf ("arm-acorn-riscix"); exit (0); ++ printf ("arm-acorn-riscix\n"); exit (0); + #endif + + #if defined (hp300) && !defined (hpux) +@@ -1291,12 +1415,12 @@ + } + EOF + +-$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm -f $dummy.c $dummy && exit 0 +-rm -f $dummy.c $dummy ++$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && ++ { echo "$SYSTEM_NAME"; exit; } + + # Apollos put the system type in the environment. + +-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } ++test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } + + # Convex versions that predate uname can use getsysinfo(1) + +@@ -1305,22 +1429,22 @@ + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd +- exit 0 ;; ++ exit ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi +- exit 0 ;; ++ exit ;; + c34*) + echo c34-convex-bsd +- exit 0 ;; ++ exit ;; + c38*) + echo c38-convex-bsd +- exit 0 ;; ++ exit ;; + c4*) + echo c4-convex-bsd +- exit 0 ;; ++ exit ;; + esac + fi + +@@ -1331,7 +1455,9 @@ + the operating system you are using. It is advised that you + download the most up to date version of the config scripts from + +- ftp://ftp.gnu.org/pub/gnu/config/ ++ http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess ++and ++ http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub + + If the version you run ($0) is already up to date, please + send the following data and any information you think might be +Index: kxl-1.1.7/config.sub +=================================================================== +--- kxl-1.1.7.orig/config.sub 2003-01-02 05:05:20.000000000 +0100 ++++ kxl-1.1.7/config.sub 2006-02-25 16:29:12.000000000 +0100 +@@ -1,9 +1,9 @@ + #! /bin/sh + # Configuration validation subroutine script. +-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 +-# Free Software Foundation, Inc. ++# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, ++# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. + +-timestamp='2001-04-20' ++timestamp='2006-02-23' + + # This file is (in principle) common to ALL GNU software. + # The presence of a machine in this file suggests that SOME GNU software +@@ -21,15 +21,17 @@ + # + # You should have received a copy of the GNU General Public License + # along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, +-# Boston, MA 02111-1307, USA. +- ++# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA ++# 02110-1301, USA. ++# + # As a special exception to the GNU General Public License, if you + # distribute this file as part of a program that contains a + # configuration script generated by Autoconf, you may include it under + # the same distribution terms that you use for the rest of that program. + +-# Please send patches to . ++ ++# Please send patches to . Submit a context ++# diff and a properly formatted ChangeLog entry. + # + # Configuration subroutine to validate and canonicalize a configuration type. + # Supply the specified configuration type as an argument. +@@ -69,7 +71,7 @@ + version="\ + GNU config.sub ($timestamp) + +-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 ++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 + Free Software Foundation, Inc. + + This is free software; see the source for copying conditions. There is NO +@@ -82,11 +84,11 @@ + while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) +- echo "$timestamp" ; exit 0 ;; ++ echo "$timestamp" ; exit ;; + --version | -v ) +- echo "$version" ; exit 0 ;; ++ echo "$version" ; exit ;; + --help | --h* | -h ) +- echo "$usage"; exit 0 ;; ++ echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. +@@ -98,7 +100,7 @@ + *local*) + # First pass through any local machine types. + echo $1 +- exit 0;; ++ exit ;; + + * ) + break ;; +@@ -117,7 +119,9 @@ + # Here we must recognize all the valid KERNEL-OS combinations. + maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` + case $maybe_os in +- nto-qnx* | linux-gnu* | storm-chaos* | os2-emx*) ++ nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \ ++ uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \ ++ storm-chaos* | os2-emx* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; +@@ -143,7 +147,7 @@ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ +- -apple | -axis) ++ -apple | -axis | -knuth | -cray) + os= + basic_machine=$1 + ;; +@@ -157,9 +161,21 @@ + os=-vxworks + basic_machine=$1 + ;; ++ -chorusos*) ++ os=-chorusos ++ basic_machine=$1 ++ ;; ++ -chorusrdb) ++ os=-chorusrdb ++ basic_machine=$1 ++ ;; + -hiux*) + os=-hiuxwe2 + ;; ++ -sco6) ++ os=-sco5v6 ++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ++ ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` +@@ -176,6 +192,10 @@ + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; ++ -sco5v6*) ++ # Don't forget version if it is 3.2v4 or newer. ++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ++ ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` +@@ -215,26 +235,58 @@ + case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. +- tahoe | i860 | ia64 | m32r | m68k | m68000 | m88k | ns32k | arc \ +- | arm | arme[lb] | arm[bl]e | armv[2345] | armv[345][lb] | strongarm | xscale \ +- | pyramid | mn10200 | mn10300 | tron | a29k \ +- | 580 | i960 | h8300 \ +- | x86 | ppcbe | mipsbe | mipsle | shbe | shle \ +- | hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w | hppa2.0n \ +- | hppa64 \ +- | alpha | alphaev[4-8] | alphaev56 | alphapca5[67] \ +- | alphaev6[78] \ +- | we32k | ns16k | clipper | i370 | sh | sh[34] \ +- | powerpc | powerpcle \ +- | 1750a | dsp16xx | pdp10 | pdp11 \ +- | mips16 | mips64 | mipsel | mips64el \ +- | mips64orion | mips64orionel | mipstx39 | mipstx39el \ +- | mips64vr4300 | mips64vr4300el | mips64vr4100 | mips64vr4100el \ +- | mips64vr5000 | miprs64vr5000el | mcore | s390 | s390x \ +- | sparc | sparclet | sparclite | sparc64 | sparcv9 | sparcv9b \ +- | v850 | c4x \ +- | thumb | d10v | d30v | fr30 | avr | openrisc | tic80 \ +- | pj | pjl | h8500) ++ 1750a | 580 \ ++ | a29k \ ++ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ ++ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ ++ | am33_2.0 \ ++ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ ++ | bfin \ ++ | c4x | clipper \ ++ | d10v | d30v | dlx | dsp16xx \ ++ | fr30 | frv \ ++ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ ++ | i370 | i860 | i960 | ia64 \ ++ | ip2k | iq2000 \ ++ | m32r | m32rle | m68000 | m68k | m88k | maxq | mb | microblaze | mcore \ ++ | mips | mipsbe | mipseb | mipsel | mipsle \ ++ | mips16 \ ++ | mips64 | mips64el \ ++ | mips64vr | mips64vrel \ ++ | mips64orion | mips64orionel \ ++ | mips64vr4100 | mips64vr4100el \ ++ | mips64vr4300 | mips64vr4300el \ ++ | mips64vr5000 | mips64vr5000el \ ++ | mips64vr5900 | mips64vr5900el \ ++ | mipsisa32 | mipsisa32el \ ++ | mipsisa32r2 | mipsisa32r2el \ ++ | mipsisa64 | mipsisa64el \ ++ | mipsisa64r2 | mipsisa64r2el \ ++ | mipsisa64sb1 | mipsisa64sb1el \ ++ | mipsisa64sr71k | mipsisa64sr71kel \ ++ | mipstx39 | mipstx39el \ ++ | mn10200 | mn10300 \ ++ | mt \ ++ | msp430 \ ++ | nios | nios2 \ ++ | ns16k | ns32k \ ++ | or32 \ ++ | pdp10 | pdp11 | pj | pjl \ ++ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ ++ | pyramid \ ++ | sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ ++ | sh64 | sh64le \ ++ | sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \ ++ | sparcv8 | sparcv9 | sparcv9b \ ++ | strongarm \ ++ | tahoe | thumb | tic4x | tic80 | tron \ ++ | v850 | v850e \ ++ | we32k \ ++ | x86 | xscale | xscalee[bl] | xstormy16 | xtensa \ ++ | z8k) ++ basic_machine=$basic_machine-unknown ++ ;; ++ m32c) + basic_machine=$basic_machine-unknown + ;; + m6811 | m68hc11 | m6812 | m68hc12) +@@ -242,7 +294,10 @@ + basic_machine=$basic_machine-unknown + os=-none + ;; +- m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | z8k | v70 | w65) ++ m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) ++ ;; ++ ms1) ++ basic_machine=mt-unknown + ;; + + # We use `pc' rather than `unknown' +@@ -257,31 +312,68 @@ + exit 1 + ;; + # Recognize the basic CPU types with company name. +- # FIXME: clean up the formatting here. +- vax-* | tahoe-* | i*86-* | i860-* | ia64-* | m32r-* | m68k-* | m68000-* \ +- | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | c[123]* \ +- | arm-* | armbe-* | armle-* | armv*-* | strongarm-* | xscale-* \ +- | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \ +- | power-* | none-* | 580-* | cray2-* | h8300-* | h8500-* | i960-* \ +- | xmp-* | ymp-* \ +- | x86-* | ppcbe-* | mipsbe-* | mipsle-* | shbe-* | shle-* \ +- | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* \ +- | hppa2.0n-* | hppa64-* \ +- | alpha-* | alphaev[4-8]-* | alphaev56-* | alphapca5[67]-* \ +- | alphaev6[78]-* \ +- | we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \ +- | clipper-* | orion-* \ +- | sparclite-* | pdp10-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \ +- | sparc64-* | sparcv9-* | sparcv9b-* | sparc86x-* \ +- | mips16-* | mips64-* | mipsel-* \ +- | mips64el-* | mips64orion-* | mips64orionel-* \ +- | mips64vr4100-* | mips64vr4100el-* | mips64vr4300-* | mips64vr4300el-* \ +- | mipstx39-* | mipstx39el-* | mcore-* \ +- | f30[01]-* | f700-* | s390-* | s390x-* | sv1-* | t3e-* \ +- | [cjt]90-* \ +- | m88110-* | m680[01234]0-* | m683?2-* | m68360-* | z8k-* | d10v-* \ +- | thumb-* | v850-* | d30v-* | tic30-* | tic80-* | c30-* | fr30-* \ +- | bs2000-* | tic54x-* | c54x-* | x86_64-* | pj-* | pjl-*) ++ 580-* \ ++ | a29k-* \ ++ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ ++ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ ++ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ ++ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ ++ | avr-* \ ++ | bfin-* | bs2000-* \ ++ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ ++ | clipper-* | craynv-* | cydra-* \ ++ | d10v-* | d30v-* | dlx-* \ ++ | elxsi-* \ ++ | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ ++ | h8300-* | h8500-* \ ++ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ ++ | i*86-* | i860-* | i960-* | ia64-* \ ++ | ip2k-* | iq2000-* \ ++ | m32r-* | m32rle-* \ ++ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ ++ | m88110-* | m88k-* | maxq-* | mcore-* \ ++ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ ++ | mips16-* \ ++ | mips64-* | mips64el-* \ ++ | mips64vr-* | mips64vrel-* \ ++ | mips64orion-* | mips64orionel-* \ ++ | mips64vr4100-* | mips64vr4100el-* \ ++ | mips64vr4300-* | mips64vr4300el-* \ ++ | mips64vr5000-* | mips64vr5000el-* \ ++ | mips64vr5900-* | mips64vr5900el-* \ ++ | mipsisa32-* | mipsisa32el-* \ ++ | mipsisa32r2-* | mipsisa32r2el-* \ ++ | mipsisa64-* | mipsisa64el-* \ ++ | mipsisa64r2-* | mipsisa64r2el-* \ ++ | mipsisa64sb1-* | mipsisa64sb1el-* \ ++ | mipsisa64sr71k-* | mipsisa64sr71kel-* \ ++ | mipstx39-* | mipstx39el-* \ ++ | mmix-* \ ++ | mt-* \ ++ | msp430-* \ ++ | nios-* | nios2-* \ ++ | none-* | np1-* | ns16k-* | ns32k-* \ ++ | orion-* \ ++ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ ++ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ ++ | pyramid-* \ ++ | romp-* | rs6000-* \ ++ | sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \ ++ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ ++ | sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \ ++ | sparclite-* \ ++ | sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ ++ | tahoe-* | thumb-* \ ++ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ ++ | tron-* \ ++ | v850-* | v850e-* | vax-* \ ++ | we32k-* \ ++ | x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \ ++ | xstormy16-* | xtensa-* \ ++ | ymp-* \ ++ | z8k-*) ++ ;; ++ m32c-*) + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. +@@ -299,6 +391,9 @@ + basic_machine=a29k-amd + os=-udi + ;; ++ abacus) ++ basic_machine=abacus-unknown ++ ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout +@@ -313,6 +408,12 @@ + basic_machine=a29k-none + os=-bsd + ;; ++ amd64) ++ basic_machine=x86_64-pc ++ ;; ++ amd64-*) ++ basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` ++ ;; + amdahl) + basic_machine=580-amdahl + os=-sysv +@@ -344,6 +445,10 @@ + basic_machine=ns32k-sequent + os=-dynix + ;; ++ c90) ++ basic_machine=c90-cray ++ os=-unicos ++ ;; + convex-c1) + basic_machine=c1-convex + os=-bsd +@@ -364,30 +469,45 @@ + basic_machine=c38-convex + os=-bsd + ;; +- cray | ymp) +- basic_machine=ymp-cray ++ cray | j90) ++ basic_machine=j90-cray + os=-unicos + ;; +- cray2) +- basic_machine=cray2-cray +- os=-unicos ++ craynv) ++ basic_machine=craynv-cray ++ os=-unicosmp + ;; +- [cjt]90) +- basic_machine=${basic_machine}-cray +- os=-unicos ++ cr16c) ++ basic_machine=cr16c-unknown ++ os=-elf + ;; + crds | unos) + basic_machine=m68k-crds + ;; ++ crisv32 | crisv32-* | etraxfs*) ++ basic_machine=crisv32-axis ++ ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; ++ crx) ++ basic_machine=crx-unknown ++ os=-elf ++ ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; ++ decsystem10* | dec10*) ++ basic_machine=pdp10-dec ++ os=-tops10 ++ ;; ++ decsystem20* | dec20*) ++ basic_machine=pdp10-dec ++ os=-tops20 ++ ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola +@@ -396,6 +516,10 @@ + basic_machine=m88k-motorola + os=-sysv3 + ;; ++ djgpp) ++ basic_machine=i586-pc ++ os=-msdosdjgpp ++ ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx +@@ -568,32 +692,27 @@ + basic_machine=m68k-atari + os=-mint + ;; +- mipsel*-linux*) +- basic_machine=mipsel-unknown +- os=-linux-gnu +- ;; +- mips*-linux*) +- basic_machine=mips-unknown +- os=-linux-gnu +- ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; +- mmix*) +- basic_machine=mmix-knuth +- os=-mmixware +- ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; ++ morphos) ++ basic_machine=powerpc-unknown ++ os=-morphos ++ ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; ++ ms1-*) ++ basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` ++ ;; + mvs) + basic_machine=i370-ibm + os=-mvs +@@ -669,6 +788,13 @@ + basic_machine=hppa1.1-oki + os=-proelf + ;; ++ openrisc | openrisc-*) ++ basic_machine=or32-unknown ++ ;; ++ os400) ++ basic_machine=powerpc-ibm ++ os=-os400 ++ ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose +@@ -691,42 +817,64 @@ + pbb) + basic_machine=m68k-tti + ;; +- pc532 | pc532-*) ++ pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; +- pentium | p5 | k5 | k6 | nexgen) ++ pc98) ++ basic_machine=i386-pc ++ ;; ++ pc98-*) ++ basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` ++ ;; ++ pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; +- pentiumpro | p6 | 6x86 | athlon) ++ pentiumpro | p6 | 6x86 | athlon | athlon_*) + basic_machine=i686-pc + ;; +- pentiumii | pentium2) ++ pentiumii | pentium2 | pentiumiii | pentium3) + basic_machine=i686-pc + ;; +- pentium-* | p5-* | k5-* | k6-* | nexgen-*) ++ pentium4) ++ basic_machine=i786-pc ++ ;; ++ pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; +- pentiumii-* | pentium2-*) ++ pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; ++ pentium4-*) ++ basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` ++ ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc) basic_machine=powerpc-unknown +- ;; ++ ;; + ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown +- ;; ++ ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; ++ ppc64) basic_machine=powerpc64-unknown ++ ;; ++ ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` ++ ;; ++ ppc64le | powerpc64little | ppc64-le | powerpc64-little) ++ basic_machine=powerpc64le-unknown ++ ;; ++ ppc64le-* | powerpc64little-*) ++ basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` ++ ;; + ps2) + basic_machine=i386-ibm + ;; +@@ -734,6 +882,10 @@ + basic_machine=i586-unknown + os=-pw32 + ;; ++ rdos) ++ basic_machine=i386-pc ++ os=-rdos ++ ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff +@@ -744,10 +896,26 @@ + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; ++ s390 | s390-*) ++ basic_machine=s390-ibm ++ ;; ++ s390x | s390x-*) ++ basic_machine=s390x-ibm ++ ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; ++ sb1) ++ basic_machine=mipsisa64sb1-unknown ++ ;; ++ sb1el) ++ basic_machine=mipsisa64sb1el-unknown ++ ;; ++ sei) ++ basic_machine=mips-sei ++ os=-seiux ++ ;; + sequent) + basic_machine=i386-sequent + ;; +@@ -755,7 +923,10 @@ + basic_machine=sh-hitachi + os=-hms + ;; +- sparclite-wrs) ++ sh64) ++ basic_machine=sh64-unknown ++ ;; ++ sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; +@@ -822,22 +993,42 @@ + os=-dynix + ;; + t3e) +- basic_machine=t3e-cray ++ basic_machine=alphaev5-cray ++ os=-unicos ++ ;; ++ t90) ++ basic_machine=t90-cray + os=-unicos + ;; + tic54x | c54x*) + basic_machine=tic54x-unknown + os=-coff + ;; ++ tic55x | c55x*) ++ basic_machine=tic55x-unknown ++ os=-coff ++ ;; ++ tic6x | c6x*) ++ basic_machine=tic6x-unknown ++ os=-coff ++ ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; ++ toad1) ++ basic_machine=pdp10-xkl ++ os=-tops20 ++ ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; ++ tpf) ++ basic_machine=s390x-ibm ++ os=-tpf ++ ;; + udi29k) + basic_machine=a29k-amd + os=-udi +@@ -859,8 +1050,8 @@ + os=-vms + ;; + vpp*|vx|vx-*) +- basic_machine=f301-fujitsu +- ;; ++ basic_machine=f301-fujitsu ++ ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks +@@ -881,13 +1072,17 @@ + basic_machine=hppa1.1-winbond + os=-proelf + ;; +- xmp) +- basic_machine=xmp-cray +- os=-unicos ++ xbox) ++ basic_machine=i686-pc ++ os=-mingw32 + ;; +- xps | xps100) ++ xps | xps100) + basic_machine=xps100-honeywell + ;; ++ ymp) ++ basic_machine=ymp-cray ++ os=-unicos ++ ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim +@@ -908,16 +1103,12 @@ + op60c) + basic_machine=hppa1.1-oki + ;; +- mips) +- if [ x$os = x-linux-gnu ]; then +- basic_machine=mips-unknown +- else +- basic_machine=mips-mips +- fi +- ;; + romp) + basic_machine=romp-ibm + ;; ++ mmix) ++ basic_machine=mmix-knuth ++ ;; + rs6000) + basic_machine=rs6000-ibm + ;; +@@ -934,13 +1125,13 @@ + we32k) + basic_machine=we32k-att + ;; +- sh3 | sh4) ++ sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele) + basic_machine=sh-unknown + ;; +- sparc | sparcv9 | sparcv9b) ++ sparc | sparcv8 | sparcv9 | sparcv9b) + basic_machine=sparc-sun + ;; +- cydra) ++ cydra) + basic_machine=cydra-cydrome + ;; + orion) +@@ -955,10 +1146,6 @@ + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; +- c4x*) +- basic_machine=c4x-none +- os=-coff +- ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; +@@ -1014,15 +1201,23 @@ + | -aos* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ +- | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \ +- | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ ++ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ ++ | -openbsd* | -solidbsd* \ ++ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ ++ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ ++ | -chorusos* | -chorusrdb* \ + | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ +- | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \ +- | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \ ++ | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \ ++ | -uxpv* | -beos* | -mpeix* | -udk* \ ++ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ +- | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* | -os2*) ++ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ ++ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ ++ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ ++ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ ++ | -skyos* | -haiku* | -rdos*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) +@@ -1034,16 +1229,21 @@ + ;; + esac + ;; ++ -nto-qnx*) ++ ;; + -nto*) +- os=-nto-qnx ++ os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ +- | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ ++ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; ++ -linux-dietlibc) ++ os=-linux-dietlibc ++ ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; +@@ -1056,6 +1256,9 @@ + -opened*) + os=-openedition + ;; ++ -os400*) ++ os=-os400 ++ ;; + -wince*) + os=-wince + ;; +@@ -1074,14 +1277,23 @@ + -acis*) + os=-aos + ;; ++ -atheos*) ++ os=-atheos ++ ;; ++ -syllable*) ++ os=-syllable ++ ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; ++ -nova*) ++ os=-rtmk-nova ++ ;; + -ns2 ) +- os=-nextstep2 ++ os=-nextstep2 + ;; + -nsk*) + os=-nsk +@@ -1093,6 +1305,9 @@ + -sinix*) + os=-sysv4 + ;; ++ -tpf*) ++ os=-tpf ++ ;; + -triton*) + os=-sysv3 + ;; +@@ -1120,8 +1335,17 @@ + -xenix) + os=-xenix + ;; +- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) +- os=-mint ++ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) ++ os=-mint ++ ;; ++ -aros*) ++ os=-aros ++ ;; ++ -kaos*) ++ os=-kaos ++ ;; ++ -zvmoe) ++ os=-zvmoe + ;; + -none) + ;; +@@ -1154,10 +1378,14 @@ + arm*-semi) + os=-aout + ;; ++ c4x-* | tic4x-*) ++ os=-coff ++ ;; ++ # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; +- pdp11-*) ++ pdp11-*) + os=-none + ;; + *-dec | vax-*) +@@ -1184,6 +1412,9 @@ + mips*-*) + os=-elf + ;; ++ or32-*) ++ os=-coff ++ ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; +@@ -1193,9 +1424,15 @@ + *-be) + os=-beos + ;; ++ *-haiku) ++ os=-haiku ++ ;; + *-ibm) + os=-aix + ;; ++ *-knuth) ++ os=-mmixware ++ ;; + *-wec) + os=-proelf + ;; +@@ -1247,19 +1484,19 @@ + *-next) + os=-nextstep3 + ;; +- *-gould) ++ *-gould) + os=-sysv + ;; +- *-highlevel) ++ *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; +- *-sgi) ++ *-sgi) + os=-irix + ;; +- *-siemens) ++ *-siemens) + os=-sysv4 + ;; + *-masscomp) +@@ -1328,10 +1565,16 @@ + -mvs* | -opened*) + vendor=ibm + ;; ++ -os400*) ++ vendor=ibm ++ ;; + -ptx*) + vendor=sequent + ;; +- -vxsim* | -vxworks*) ++ -tpf*) ++ vendor=ibm ++ ;; ++ -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) +@@ -1346,13 +1589,16 @@ + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; ++ -vos*) ++ vendor=stratus ++ ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; + esac + + echo $basic_machine$os +-exit 0 ++exit + + # Local variables: + # eval: (add-hook 'write-file-hooks 'time-stamp) +Index: kxl-1.1.7/configure +=================================================================== +--- kxl-1.1.7.orig/configure 2003-02-14 08:25:21.000000000 +0100 ++++ kxl-1.1.7/configure 2006-05-09 18:51:28.000000000 +0200 +@@ -1,35 +1,246 @@ + #! /bin/sh +- + # Guess values for system-dependent variables and create Makefiles. +-# Generated automatically using autoconf version 2.13 +-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. ++# Generated by GNU Autoconf 2.59. + # ++# Copyright (C) 2003 Free Software Foundation, Inc. + # This configure script is free software; the Free Software Foundation + # gives unlimited permission to copy, distribute and modify it. ++## --------------------- ## ++## M4sh Initialization. ## ++## --------------------- ## ++ ++# Be Bourne compatible ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then ++ set -o posix ++fi ++DUALCASE=1; export DUALCASE # for MKS sh ++ ++# Support unset when possible. ++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then ++ as_unset=unset ++else ++ as_unset=false ++fi + +-# Defaults: +-ac_help= +-ac_default_prefix=/usr/local +-# Any additions from configure.in: +-ac_help="$ac_help +- --enable-shared[=PKGS] build shared libraries [default=yes]" +-ac_help="$ac_help +- --enable-static[=PKGS] build static libraries [default=yes]" +-ac_help="$ac_help +- --enable-fast-install[=PKGS] optimize for fast installation [default=yes]" +-ac_help="$ac_help +- --with-gnu-ld assume the C compiler uses GNU ld [default=no]" +- +-# Find the correct PATH separator. Usually this is `:', but +-# DJGPP uses `;' like DOS. +-if test "X${PATH_SEPARATOR+set}" != Xset; then +- UNAME=${UNAME-`uname 2>/dev/null`} +- case X$UNAME in +- *-DOS) lt_cv_sys_path_separator=';' ;; +- *) lt_cv_sys_path_separator=':' ;; ++ ++# Work around bugs in pre-3.0 UWIN ksh. ++$as_unset ENV MAIL MAILPATH ++PS1='$ ' ++PS2='> ' ++PS4='+ ' ++ ++# NLS nuisances. ++for as_var in \ ++ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ ++ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ ++ LC_TELEPHONE LC_TIME ++do ++ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then ++ eval $as_var=C; export $as_var ++ else ++ $as_unset $as_var ++ fi ++done ++ ++# Required to use basename. ++if expr a : '\(a\)' >/dev/null 2>&1; then ++ as_expr=expr ++else ++ as_expr=false ++fi ++ ++if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then ++ as_basename=basename ++else ++ as_basename=false ++fi ++ ++ ++# Name of the executable. ++as_me=`$as_basename "$0" || ++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ ++ X"$0" : 'X\(//\)$' \| \ ++ X"$0" : 'X\(/\)$' \| \ ++ . : '\(.\)' 2>/dev/null || ++echo X/"$0" | ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } ++ /^X\/\(\/\/\)$/{ s//\1/; q; } ++ /^X\/\(\/\).*/{ s//\1/; q; } ++ s/.*/./; q'` ++ ++ ++# PATH needs CR, and LINENO needs CR and PATH. ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits ++ ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ echo "#! /bin/sh" >conf$$.sh ++ echo "exit 0" >>conf$$.sh ++ chmod +x conf$$.sh ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then ++ PATH_SEPARATOR=';' ++ else ++ PATH_SEPARATOR=: ++ fi ++ rm -f conf$$.sh ++fi ++ ++ ++ as_lineno_1=$LINENO ++ as_lineno_2=$LINENO ++ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` ++ test "x$as_lineno_1" != "x$as_lineno_2" && ++ test "x$as_lineno_3" = "x$as_lineno_2" || { ++ # Find who we are. Look in the path if we contain no path at all ++ # relative or not. ++ case $0 in ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++done ++ ++ ;; ++ esac ++ # We did not find ourselves, most probably we were run as `sh COMMAND' ++ # in which case we are not to be found in the path. ++ if test "x$as_myself" = x; then ++ as_myself=$0 ++ fi ++ if test ! -f "$as_myself"; then ++ { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 ++ { (exit 1); exit 1; }; } ++ fi ++ case $CONFIG_SHELL in ++ '') ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for as_base in sh bash ksh sh5; do ++ case $as_dir in ++ /*) ++ if ("$as_dir/$as_base" -c ' ++ as_lineno_1=$LINENO ++ as_lineno_2=$LINENO ++ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` ++ test "x$as_lineno_1" != "x$as_lineno_2" && ++ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then ++ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } ++ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } ++ CONFIG_SHELL=$as_dir/$as_base ++ export CONFIG_SHELL ++ exec "$CONFIG_SHELL" "$0" ${1+"$@"} ++ fi;; ++ esac ++ done ++done ++;; + esac ++ ++ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO ++ # uniformly replaced by the line number. The first 'sed' inserts a ++ # line-number line before each line; the second 'sed' does the real ++ # work. The second script uses 'N' to pair each line-number line ++ # with the numbered line, and appends trailing '-' during ++ # substitution so that $LINENO is not a special case at line end. ++ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the ++ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) ++ sed '=' <$as_myself | ++ sed ' ++ N ++ s,$,-, ++ : loop ++ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, ++ t loop ++ s,-$,, ++ s,^['$as_cr_digits']*\n,, ++ ' >$as_me.lineno && ++ chmod +x $as_me.lineno || ++ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 ++ { (exit 1); exit 1; }; } ++ ++ # Don't try to exec as it changes $[0], causing all sort of problems ++ # (the dirname of $[0] is not the place where we might find the ++ # original and so on. Autoconf is especially sensible to this). ++ . ./$as_me.lineno ++ # Exit status is that of the last command. ++ exit ++} ++ ++ ++case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in ++ *c*,-n*) ECHO_N= ECHO_C=' ++' ECHO_T=' ' ;; ++ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; ++ *) ECHO_N= ECHO_C='\c' ECHO_T= ;; ++esac ++ ++if expr a : '\(a\)' >/dev/null 2>&1; then ++ as_expr=expr ++else ++ as_expr=false ++fi ++ ++rm -f conf$$ conf$$.exe conf$$.file ++echo >conf$$.file ++if ln -s conf$$.file conf$$ 2>/dev/null; then ++ # We could just check for DJGPP; but this test a) works b) is more generic ++ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). ++ if test -f conf$$.exe; then ++ # Don't use ln at all; we don't have any links ++ as_ln_s='cp -p' ++ else ++ as_ln_s='ln -s' ++ fi ++elif ln conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s=ln ++else ++ as_ln_s='cp -p' ++fi ++rm -f conf$$ conf$$.exe conf$$.file ++ ++if mkdir -p . 2>/dev/null; then ++ as_mkdir_p=: ++else ++ test -d ./-p && rmdir ./-p ++ as_mkdir_p=false + fi + ++as_executable_p="test -f" ++ ++# Sed expression to map a string onto a valid CPP name. ++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" ++ ++# Sed expression to map a string onto a valid variable name. ++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" ++ ++ ++# IFS ++# We need space, tab and new line, in precisely that order. ++as_nl=' ++' ++IFS=" $as_nl" ++ ++# CDPATH. ++$as_unset CDPATH ++ ++ + + # Check that we are running under the correct shell. + SHELL=${CONFIG_SHELL-/bin/sh} +@@ -48,7 +259,7 @@ + elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then ++elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then + # Yippee, $echo works! + : + else +@@ -60,22 +271,22 @@ + # used as fallback echo + shift + cat </dev/null 2>&1 && unset CDPATH + + if test -z "$ECHO"; then + if test "X${echo_test_string+set}" != Xset; then + # find a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... +- if (echo_test_string="`eval $cmd`") 2>/dev/null && +- echo_test_string="`eval $cmd`" && ++ if (echo_test_string=`eval $cmd`) 2>/dev/null && ++ echo_test_string=`eval $cmd` && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null + then + break +@@ -94,8 +305,9 @@ + # + # So, first we look for a working echo in the user's PATH. + +- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do ++ IFS="$lt_save_ifs" + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && +@@ -104,7 +316,7 @@ + break + fi + done +- IFS="$save_ifs" ++ IFS="$lt_save_ifs" + + if test "X$echo" = Xecho; then + # We didn't find a better echo, so look for alternatives. +@@ -177,22 +389,91 @@ + fi + + +-ac_help="$ac_help +- --disable-libtool-lock avoid locking (might break parallel builds)" +-ac_help="$ac_help +- --with-pic try to use only PIC/non-PIC objects [default=use both]" +-ac_help="$ac_help +- --with-x use the X Window System" ++ ++ ++tagnames=${tagnames+${tagnames},}CXX ++ ++tagnames=${tagnames+${tagnames},}F77 ++ ++# Name of the host. ++# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, ++# so uname gets run too. ++ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` ++ ++exec 6>&1 ++ ++# ++# Initializations. ++# ++ac_default_prefix=/usr/local ++ac_config_libobj_dir=. ++cross_compiling=no ++subdirs= ++MFLAGS= ++MAKEFLAGS= ++SHELL=${CONFIG_SHELL-/bin/sh} ++ ++# Maximum number of lines to put in a shell here document. ++# This variable seems obsolete. It should probably be removed, and ++# only ac_max_sed_lines should be used. ++: ${ac_max_here_lines=38} ++ ++# Identity of this package. ++PACKAGE_NAME= ++PACKAGE_TARNAME= ++PACKAGE_VERSION= ++PACKAGE_STRING= ++PACKAGE_BUGREPORT= ++ ++ac_unique_file="src/KXL.h" ++# Factoring default headers for most tests. ++ac_includes_default="\ ++#include ++#if HAVE_SYS_TYPES_H ++# include ++#endif ++#if HAVE_SYS_STAT_H ++# include ++#endif ++#if STDC_HEADERS ++# include ++# include ++#else ++# if HAVE_STDLIB_H ++# include ++# endif ++#endif ++#if HAVE_STRING_H ++# if !STDC_HEADERS && HAVE_MEMORY_H ++# include ++# endif ++# include ++#endif ++#if HAVE_STRINGS_H ++# include ++#endif ++#if HAVE_INTTYPES_H ++# include ++#else ++# if HAVE_STDINT_H ++# include ++# endif ++#endif ++#if HAVE_UNISTD_H ++# include ++#endif" ++ ++ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE build build_cpu build_vendor build_os host host_cpu host_vendor host_os EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL X_CFLAGS X_PRE_LIBS X_LIBS X_EXTRA_LIBS aclocaldir LIBOBJS LTLIBOBJS' ++ac_subst_files='' + + # Initialize some variables set by options. ++ac_init_help= ++ac_init_version=false + # The variables have the same names as the options, with + # dashes changed to underlines. +-build=NONE +-cache_file=./config.cache ++cache_file=/dev/null + exec_prefix=NONE +-host=NONE + no_create= +-nonopt=NONE + no_recursion= + prefix=NONE + program_prefix=NONE +@@ -201,10 +482,15 @@ + silent= + site= + srcdir= +-target=NONE + verbose= + x_includes=NONE + x_libraries=NONE ++ ++# Installation directory options. ++# These are left unexpanded so users can "make install exec_prefix=/foo" ++# and all the variables that are supposed to be based on exec_prefix ++# by default will actually change. ++# Use braces instead of parens because sh, perl, etc. also accept them. + bindir='${exec_prefix}/bin' + sbindir='${exec_prefix}/sbin' + libexecdir='${exec_prefix}/libexec' +@@ -218,17 +504,9 @@ + infodir='${prefix}/info' + mandir='${prefix}/man' + +-# Initialize some other variables. +-subdirs= +-MFLAGS= MAKEFLAGS= +-SHELL=${CONFIG_SHELL-/bin/sh} +-# Maximum number of lines to put in a shell here document. +-ac_max_here_lines=12 +- + ac_prev= + for ac_option + do +- + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval "$ac_prev=\$ac_option" +@@ -236,59 +514,59 @@ + continue + fi + +- case "$ac_option" in +- -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; +- *) ac_optarg= ;; +- esac ++ ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` + + # Accept the important Cygnus configure options, so we can diagnose typos. + +- case "$ac_option" in ++ case $ac_option in + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) +- bindir="$ac_optarg" ;; ++ bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) +- ac_prev=build ;; ++ ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) +- build="$ac_optarg" ;; ++ build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) +- cache_file="$ac_optarg" ;; ++ cache_file=$ac_optarg ;; ++ ++ --config-cache | -C) ++ cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ + | --da=*) +- datadir="$ac_optarg" ;; ++ datadir=$ac_optarg ;; + + -disable-* | --disable-*) +- ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` ++ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. +- if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then +- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } +- fi +- ac_feature=`echo $ac_feature| sed 's/-/_/g'` +- eval "enable_${ac_feature}=no" ;; ++ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid feature name: $ac_feature" >&2 ++ { (exit 1); exit 1; }; } ++ ac_feature=`echo $ac_feature | sed 's/-/_/g'` ++ eval "enable_$ac_feature=no" ;; + + -enable-* | --enable-*) +- ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` ++ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. +- if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then +- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } +- fi +- ac_feature=`echo $ac_feature| sed 's/-/_/g'` +- case "$ac_option" in +- *=*) ;; ++ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid feature name: $ac_feature" >&2 ++ { (exit 1); exit 1; }; } ++ ac_feature=`echo $ac_feature | sed 's/-/_/g'` ++ case $ac_option in ++ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; + *) ac_optarg=yes ;; + esac +- eval "enable_${ac_feature}='$ac_optarg'" ;; ++ eval "enable_$ac_feature='$ac_optarg'" ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ +@@ -297,95 +575,47 @@ + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) +- exec_prefix="$ac_optarg" ;; ++ exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + +- -help | --help | --hel | --he) +- # Omit some internal or obsolete options to make the list less imposing. +- # This message is too long to be a string in the A/UX 3.1 sh. +- cat << EOF +-Usage: configure [options] [host] +-Options: [defaults in brackets after descriptions] +-Configuration: +- --cache-file=FILE cache test results in FILE +- --help print this message +- --no-create do not create output files +- --quiet, --silent do not print \`checking...' messages +- --version print the version of autoconf that created configure +-Directory and file names: +- --prefix=PREFIX install architecture-independent files in PREFIX +- [$ac_default_prefix] +- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX +- [same as prefix] +- --bindir=DIR user executables in DIR [EPREFIX/bin] +- --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] +- --libexecdir=DIR program executables in DIR [EPREFIX/libexec] +- --datadir=DIR read-only architecture-independent data in DIR +- [PREFIX/share] +- --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] +- --sharedstatedir=DIR modifiable architecture-independent data in DIR +- [PREFIX/com] +- --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] +- --libdir=DIR object code libraries in DIR [EPREFIX/lib] +- --includedir=DIR C header files in DIR [PREFIX/include] +- --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] +- --infodir=DIR info documentation in DIR [PREFIX/info] +- --mandir=DIR man documentation in DIR [PREFIX/man] +- --srcdir=DIR find the sources in DIR [configure dir or ..] +- --program-prefix=PREFIX prepend PREFIX to installed program names +- --program-suffix=SUFFIX append SUFFIX to installed program names +- --program-transform-name=PROGRAM +- run sed PROGRAM on installed program names +-EOF +- cat << EOF +-Host type: +- --build=BUILD configure for building on BUILD [BUILD=HOST] +- --host=HOST configure for HOST [guessed] +- --target=TARGET configure for TARGET [TARGET=HOST] +-Features and packages: +- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) +- --enable-FEATURE[=ARG] include FEATURE [ARG=yes] +- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] +- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) +- --x-includes=DIR X include files are in DIR +- --x-libraries=DIR X library files are in DIR +-EOF +- if test -n "$ac_help"; then +- echo "--enable and --with options recognized:$ac_help" +- fi +- exit 0 ;; ++ -help | --help | --hel | --he | -h) ++ ac_init_help=long ;; ++ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ++ ac_init_help=recursive ;; ++ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ++ ac_init_help=short ;; + + -host | --host | --hos | --ho) +- ac_prev=host ;; ++ ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) +- host="$ac_optarg" ;; ++ host_alias=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) +- includedir="$ac_optarg" ;; ++ includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) +- infodir="$ac_optarg" ;; ++ infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) +- libdir="$ac_optarg" ;; ++ libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) +- libexecdir="$ac_optarg" ;; ++ libexecdir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst \ +@@ -394,19 +624,19 @@ + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* \ + | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) +- localstatedir="$ac_optarg" ;; ++ localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) +- mandir="$ac_optarg" ;; ++ mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ +- | --no-cr | --no-c) ++ | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ +@@ -420,26 +650,26 @@ + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) +- oldincludedir="$ac_optarg" ;; ++ oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) +- prefix="$ac_optarg" ;; ++ prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) +- program_prefix="$ac_optarg" ;; ++ program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) +- program_suffix="$ac_optarg" ;; ++ program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ +@@ -456,7 +686,7 @@ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) +- program_transform_name="$ac_optarg" ;; ++ program_transform_name=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) +@@ -466,7 +696,7 @@ + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) +- sbindir="$ac_optarg" ;; ++ sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ +@@ -477,58 +707,57 @@ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) +- sharedstatedir="$ac_optarg" ;; ++ sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) +- site="$ac_optarg" ;; ++ site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) +- srcdir="$ac_optarg" ;; ++ srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) +- sysconfdir="$ac_optarg" ;; ++ sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) +- ac_prev=target ;; ++ ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) +- target="$ac_optarg" ;; ++ target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + +- -version | --version | --versio | --versi | --vers) +- echo "configure generated by autoconf version 2.13" +- exit 0 ;; ++ -version | --version | --versio | --versi | --vers | -V) ++ ac_init_version=: ;; + + -with-* | --with-*) +- ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` ++ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. +- if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then +- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } +- fi ++ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid package name: $ac_package" >&2 ++ { (exit 1); exit 1; }; } + ac_package=`echo $ac_package| sed 's/-/_/g'` +- case "$ac_option" in +- *=*) ;; ++ case $ac_option in ++ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; + *) ac_optarg=yes ;; + esac +- eval "with_${ac_package}='$ac_optarg'" ;; ++ eval "with_$ac_package='$ac_optarg'" ;; + + -without-* | --without-*) +- ac_package=`echo $ac_option|sed -e 's/-*without-//'` ++ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. +- if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then +- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } +- fi +- ac_package=`echo $ac_package| sed 's/-/_/g'` +- eval "with_${ac_package}=no" ;; ++ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid package name: $ac_package" >&2 ++ { (exit 1); exit 1; }; } ++ ac_package=`echo $ac_package | sed 's/-/_/g'` ++ eval "with_$ac_package=no" ;; + + --x) + # Obsolete; use --with-x. +@@ -539,99 +768,110 @@ + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) +- x_includes="$ac_optarg" ;; ++ x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) +- x_libraries="$ac_optarg" ;; ++ x_libraries=$ac_optarg ;; + +- -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } ++ -*) { echo "$as_me: error: unrecognized option: $ac_option ++Try \`$0 --help' for more information." >&2 ++ { (exit 1); exit 1; }; } + ;; + ++ *=*) ++ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` ++ # Reject names that are not valid shell variable names. ++ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 ++ { (exit 1); exit 1; }; } ++ ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ++ eval "$ac_envvar='$ac_optarg'" ++ export $ac_envvar ;; ++ + *) +- if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then +- echo "configure: warning: $ac_option: invalid host type" 1>&2 +- fi +- if test "x$nonopt" != xNONE; then +- { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } +- fi +- nonopt="$ac_option" ++ # FIXME: should be removed in autoconf 3.0. ++ echo "$as_me: WARNING: you should use --build, --host, --target" >&2 ++ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ echo "$as_me: WARNING: invalid host type: $ac_option" >&2 ++ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + ;; + + esac + done + + if test -n "$ac_prev"; then +- { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } +-fi +- +-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 +- +-# File descriptor usage: +-# 0 standard input +-# 1 file creation +-# 2 errors and warnings +-# 3 some systems may open it to /dev/tty +-# 4 used on the Kubota Titan +-# 6 checking for... messages and results +-# 5 compiler messages saved in config.log +-if test "$silent" = yes; then +- exec 6>/dev/null +-else +- exec 6>&1 ++ ac_option=--`echo $ac_prev | sed 's/_/-/g'` ++ { echo "$as_me: error: missing argument to $ac_option" >&2 ++ { (exit 1); exit 1; }; } + fi +-exec 5>./config.log + +-echo "\ +-This file contains any messages produced by compilers while +-running configure, to aid debugging if configure makes a mistake. +-" 1>&5 ++# Be sure to have absolute paths. ++for ac_var in exec_prefix prefix ++do ++ eval ac_val=$`echo $ac_var` ++ case $ac_val in ++ [\\/$]* | ?:[\\/]* | NONE | '' ) ;; ++ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 ++ { (exit 1); exit 1; }; };; ++ esac ++done + +-# Strip out --no-create and --no-recursion so they do not pile up. +-# Also quote any args containing shell metacharacters. +-ac_configure_args= +-for ac_arg ++# Be sure to have absolute paths. ++for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ ++ localstatedir libdir includedir oldincludedir infodir mandir + do +- case "$ac_arg" in +- -no-create | --no-create | --no-creat | --no-crea | --no-cre \ +- | --no-cr | --no-c) ;; +- -no-recursion | --no-recursion | --no-recursio | --no-recursi \ +- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; +- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) +- ac_configure_args="$ac_configure_args '$ac_arg'" ;; +- *) ac_configure_args="$ac_configure_args $ac_arg" ;; ++ eval ac_val=$`echo $ac_var` ++ case $ac_val in ++ [\\/$]* | ?:[\\/]* ) ;; ++ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 ++ { (exit 1); exit 1; }; };; + esac + done + +-# NLS nuisances. +-# Only set these to C if already set. These must not be set unconditionally +-# because not all systems understand e.g. LANG=C (notably SCO). +-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! +-# Non-C LC_CTYPE values break the ctype check. +-if test "${LANG+set}" = set; then LANG=C; export LANG; fi +-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi +-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi +-if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi ++# There might be people who depend on the old broken behavior: `$host' ++# used to hold the argument of --host etc. ++# FIXME: To remove some day. ++build=$build_alias ++host=$host_alias ++target=$target_alias ++ ++# FIXME: To remove some day. ++if test "x$host_alias" != x; then ++ if test "x$build_alias" = x; then ++ cross_compiling=maybe ++ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. ++ If a cross compiler is detected then cross compile mode will be used." >&2 ++ elif test "x$build_alias" != "x$host_alias"; then ++ cross_compiling=yes ++ fi ++fi + +-# confdefs.h avoids OS command line length limits that DEFS can exceed. +-rm -rf conftest* confdefs.h +-# AIX cpp loses on an empty file, so make sure it contains at least a newline. +-echo > confdefs.h ++ac_tool_prefix= ++test -n "$host_alias" && ac_tool_prefix=$host_alias- ++ ++test "$silent" = yes && exec 6>/dev/null + +-# A filename unique to this package, relative to the directory that +-# configure is in, which we can look for to find out if srcdir is correct. +-ac_unique_file=src/KXL.h + + # Find the source files, if location was not specified. + if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then its parent. +- ac_prog=$0 +- ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` +- test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. ++ ac_confdir=`(dirname "$0") 2>/dev/null || ++$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$0" : 'X\(//\)[^/]' \| \ ++ X"$0" : 'X\(//\)$' \| \ ++ X"$0" : 'X\(/\)' \| \ ++ . : '\(.\)' 2>/dev/null || ++echo X"$0" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } ++ /^X\(\/\/\)[^/].*/{ s//\1/; q; } ++ /^X\(\/\/\)$/{ s//\1/; q; } ++ /^X\(\/\).*/{ s//\1/; q; } ++ s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r $srcdir/$ac_unique_file; then + srcdir=.. +@@ -641,13 +881,515 @@ + fi + if test ! -r $srcdir/$ac_unique_file; then + if test "$ac_srcdir_defaulted" = yes; then +- { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } ++ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 ++ { (exit 1); exit 1; }; } + else +- { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } ++ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 ++ { (exit 1); exit 1; }; } + fi + fi +-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` ++(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || ++ { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 ++ { (exit 1); exit 1; }; } ++srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` ++ac_env_build_alias_set=${build_alias+set} ++ac_env_build_alias_value=$build_alias ++ac_cv_env_build_alias_set=${build_alias+set} ++ac_cv_env_build_alias_value=$build_alias ++ac_env_host_alias_set=${host_alias+set} ++ac_env_host_alias_value=$host_alias ++ac_cv_env_host_alias_set=${host_alias+set} ++ac_cv_env_host_alias_value=$host_alias ++ac_env_target_alias_set=${target_alias+set} ++ac_env_target_alias_value=$target_alias ++ac_cv_env_target_alias_set=${target_alias+set} ++ac_cv_env_target_alias_value=$target_alias ++ac_env_CC_set=${CC+set} ++ac_env_CC_value=$CC ++ac_cv_env_CC_set=${CC+set} ++ac_cv_env_CC_value=$CC ++ac_env_CFLAGS_set=${CFLAGS+set} ++ac_env_CFLAGS_value=$CFLAGS ++ac_cv_env_CFLAGS_set=${CFLAGS+set} ++ac_cv_env_CFLAGS_value=$CFLAGS ++ac_env_LDFLAGS_set=${LDFLAGS+set} ++ac_env_LDFLAGS_value=$LDFLAGS ++ac_cv_env_LDFLAGS_set=${LDFLAGS+set} ++ac_cv_env_LDFLAGS_value=$LDFLAGS ++ac_env_CPPFLAGS_set=${CPPFLAGS+set} ++ac_env_CPPFLAGS_value=$CPPFLAGS ++ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} ++ac_cv_env_CPPFLAGS_value=$CPPFLAGS ++ac_env_CPP_set=${CPP+set} ++ac_env_CPP_value=$CPP ++ac_cv_env_CPP_set=${CPP+set} ++ac_cv_env_CPP_value=$CPP ++ac_env_CXX_set=${CXX+set} ++ac_env_CXX_value=$CXX ++ac_cv_env_CXX_set=${CXX+set} ++ac_cv_env_CXX_value=$CXX ++ac_env_CXXFLAGS_set=${CXXFLAGS+set} ++ac_env_CXXFLAGS_value=$CXXFLAGS ++ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set} ++ac_cv_env_CXXFLAGS_value=$CXXFLAGS ++ac_env_CXXCPP_set=${CXXCPP+set} ++ac_env_CXXCPP_value=$CXXCPP ++ac_cv_env_CXXCPP_set=${CXXCPP+set} ++ac_cv_env_CXXCPP_value=$CXXCPP ++ac_env_F77_set=${F77+set} ++ac_env_F77_value=$F77 ++ac_cv_env_F77_set=${F77+set} ++ac_cv_env_F77_value=$F77 ++ac_env_FFLAGS_set=${FFLAGS+set} ++ac_env_FFLAGS_value=$FFLAGS ++ac_cv_env_FFLAGS_set=${FFLAGS+set} ++ac_cv_env_FFLAGS_value=$FFLAGS ++ ++# ++# Report the --help message. ++# ++if test "$ac_init_help" = "long"; then ++ # Omit some internal or obsolete options to make the list less imposing. ++ # This message is too long to be a string in the A/UX 3.1 sh. ++ cat <<_ACEOF ++\`configure' configures this package to adapt to many kinds of systems. ++ ++Usage: $0 [OPTION]... [VAR=VALUE]... ++ ++To assign environment variables (e.g., CC, CFLAGS...), specify them as ++VAR=VALUE. See below for descriptions of some of the useful variables. ++ ++Defaults for the options are specified in brackets. ++ ++Configuration: ++ -h, --help display this help and exit ++ --help=short display options specific to this package ++ --help=recursive display the short help of all the included packages ++ -V, --version display version information and exit ++ -q, --quiet, --silent do not print \`checking...' messages ++ --cache-file=FILE cache test results in FILE [disabled] ++ -C, --config-cache alias for \`--cache-file=config.cache' ++ -n, --no-create do not create output files ++ --srcdir=DIR find the sources in DIR [configure dir or \`..'] ++ ++_ACEOF ++ ++ cat <<_ACEOF ++Installation directories: ++ --prefix=PREFIX install architecture-independent files in PREFIX ++ [$ac_default_prefix] ++ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX ++ [PREFIX] ++ ++By default, \`make install' will install all the files in ++\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify ++an installation prefix other than \`$ac_default_prefix' using \`--prefix', ++for instance \`--prefix=\$HOME'. ++ ++For better control, use the options below. ++ ++Fine tuning of the installation directories: ++ --bindir=DIR user executables [EPREFIX/bin] ++ --sbindir=DIR system admin executables [EPREFIX/sbin] ++ --libexecdir=DIR program executables [EPREFIX/libexec] ++ --datadir=DIR read-only architecture-independent data [PREFIX/share] ++ --sysconfdir=DIR read-only single-machine data [PREFIX/etc] ++ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] ++ --localstatedir=DIR modifiable single-machine data [PREFIX/var] ++ --libdir=DIR object code libraries [EPREFIX/lib] ++ --includedir=DIR C header files [PREFIX/include] ++ --oldincludedir=DIR C header files for non-gcc [/usr/include] ++ --infodir=DIR info documentation [PREFIX/info] ++ --mandir=DIR man documentation [PREFIX/man] ++_ACEOF ++ ++ cat <<\_ACEOF ++ ++Program names: ++ --program-prefix=PREFIX prepend PREFIX to installed program names ++ --program-suffix=SUFFIX append SUFFIX to installed program names ++ --program-transform-name=PROGRAM run sed PROGRAM on installed program names ++ ++X features: ++ --x-includes=DIR X include files are in DIR ++ --x-libraries=DIR X library files are in DIR ++ ++System types: ++ --build=BUILD configure for building on BUILD [guessed] ++ --host=HOST cross-compile to build programs to run on HOST [BUILD] ++_ACEOF ++fi ++ ++if test -n "$ac_init_help"; then ++ ++ cat <<\_ACEOF ++ ++Optional Features: ++ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) ++ --enable-FEATURE[=ARG] include FEATURE [ARG=yes] ++ --disable-dependency-tracking speeds up one-time build ++ --enable-dependency-tracking do not reject slow dependency extractors ++ --enable-shared[=PKGS] ++ build shared libraries [default=yes] ++ --enable-static[=PKGS] ++ build static libraries [default=yes] ++ --enable-fast-install[=PKGS] ++ optimize for fast installation [default=yes] ++ --disable-libtool-lock avoid locking (might break parallel builds) ++ ++Optional Packages: ++ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] ++ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) ++ --with-gnu-ld assume the C compiler uses GNU ld [default=no] ++ --with-pic try to use only PIC/non-PIC objects [default=use ++ both] ++ --with-tags[=TAGS] ++ include additional configurations [automatic] ++ --with-x use the X Window System ++ ++Some influential environment variables: ++ CC C compiler command ++ CFLAGS C compiler flags ++ LDFLAGS linker flags, e.g. -L if you have libraries in a ++ nonstandard directory ++ CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have ++ headers in a nonstandard directory ++ CPP C preprocessor ++ CXX C++ compiler command ++ CXXFLAGS C++ compiler flags ++ CXXCPP C++ preprocessor ++ F77 Fortran 77 compiler command ++ FFLAGS Fortran 77 compiler flags ++ ++Use these variables to override the choices made by `configure' or to help ++it to find libraries and programs with nonstandard names/locations. ++ ++_ACEOF ++fi ++ ++if test "$ac_init_help" = "recursive"; then ++ # If there are subdirs, report their specific --help. ++ ac_popdir=`pwd` ++ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue ++ test -d $ac_dir || continue ++ ac_builddir=. ++ ++if test "$ac_dir" != .; then ++ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` ++ # A "../" for each directory in $ac_dir_suffix. ++ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` ++else ++ ac_dir_suffix= ac_top_builddir= ++fi ++ ++case $srcdir in ++ .) # No --srcdir option. We are building in place. ++ ac_srcdir=. ++ if test -z "$ac_top_builddir"; then ++ ac_top_srcdir=. ++ else ++ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` ++ fi ;; ++ [\\/]* | ?:[\\/]* ) # Absolute path. ++ ac_srcdir=$srcdir$ac_dir_suffix; ++ ac_top_srcdir=$srcdir ;; ++ *) # Relative path. ++ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_builddir$srcdir ;; ++esac ++ ++# Do not use `cd foo && pwd` to compute absolute paths, because ++# the directories may not exist. ++case `pwd` in ++.) ac_abs_builddir="$ac_dir";; ++*) ++ case "$ac_dir" in ++ .) ac_abs_builddir=`pwd`;; ++ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; ++ *) ac_abs_builddir=`pwd`/"$ac_dir";; ++ esac;; ++esac ++case $ac_abs_builddir in ++.) ac_abs_top_builddir=${ac_top_builddir}.;; ++*) ++ case ${ac_top_builddir}. in ++ .) ac_abs_top_builddir=$ac_abs_builddir;; ++ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; ++ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; ++ esac;; ++esac ++case $ac_abs_builddir in ++.) ac_abs_srcdir=$ac_srcdir;; ++*) ++ case $ac_srcdir in ++ .) ac_abs_srcdir=$ac_abs_builddir;; ++ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; ++ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; ++ esac;; ++esac ++case $ac_abs_builddir in ++.) ac_abs_top_srcdir=$ac_top_srcdir;; ++*) ++ case $ac_top_srcdir in ++ .) ac_abs_top_srcdir=$ac_abs_builddir;; ++ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; ++ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; ++ esac;; ++esac ++ ++ cd $ac_dir ++ # Check for guested configure; otherwise get Cygnus style configure. ++ if test -f $ac_srcdir/configure.gnu; then ++ echo ++ $SHELL $ac_srcdir/configure.gnu --help=recursive ++ elif test -f $ac_srcdir/configure; then ++ echo ++ $SHELL $ac_srcdir/configure --help=recursive ++ elif test -f $ac_srcdir/configure.ac || ++ test -f $ac_srcdir/configure.in; then ++ echo ++ $ac_configure --help ++ else ++ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 ++ fi ++ cd "$ac_popdir" ++ done ++fi ++ ++test -n "$ac_init_help" && exit 0 ++if $ac_init_version; then ++ cat <<\_ACEOF ++ ++Copyright (C) 2003 Free Software Foundation, Inc. ++This configure script is free software; the Free Software Foundation ++gives unlimited permission to copy, distribute and modify it. ++_ACEOF ++ exit 0 ++fi ++exec 5>config.log ++cat >&5 <<_ACEOF ++This file contains any messages produced by compilers while ++running configure, to aid debugging if configure makes a mistake. ++ ++It was created by $as_me, which was ++generated by GNU Autoconf 2.59. Invocation command line was ++ ++ $ $0 $@ ++ ++_ACEOF ++{ ++cat <<_ASUNAME ++## --------- ## ++## Platform. ## ++## --------- ## ++ ++hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` ++uname -m = `(uname -m) 2>/dev/null || echo unknown` ++uname -r = `(uname -r) 2>/dev/null || echo unknown` ++uname -s = `(uname -s) 2>/dev/null || echo unknown` ++uname -v = `(uname -v) 2>/dev/null || echo unknown` ++ ++/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` ++/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` ++ ++/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` ++/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` ++/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` ++hostinfo = `(hostinfo) 2>/dev/null || echo unknown` ++/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` ++/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` ++/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` ++ ++_ASUNAME ++ ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ echo "PATH: $as_dir" ++done ++ ++} >&5 ++ ++cat >&5 <<_ACEOF ++ ++ ++## ----------- ## ++## Core tests. ## ++## ----------- ## ++ ++_ACEOF ++ ++ ++# Keep a trace of the command line. ++# Strip out --no-create and --no-recursion so they do not pile up. ++# Strip out --silent because we don't want to record it for future runs. ++# Also quote any args containing shell meta-characters. ++# Make two passes to allow for proper duplicate-argument suppression. ++ac_configure_args= ++ac_configure_args0= ++ac_configure_args1= ++ac_sep= ++ac_must_keep_next=false ++for ac_pass in 1 2 ++do ++ for ac_arg ++ do ++ case $ac_arg in ++ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ++ | -silent | --silent | --silen | --sile | --sil) ++ continue ;; ++ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) ++ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; ++ esac ++ case $ac_pass in ++ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; ++ 2) ++ ac_configure_args1="$ac_configure_args1 '$ac_arg'" ++ if test $ac_must_keep_next = true; then ++ ac_must_keep_next=false # Got value, back to normal. ++ else ++ case $ac_arg in ++ *=* | --config-cache | -C | -disable-* | --disable-* \ ++ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ ++ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ ++ | -with-* | --with-* | -without-* | --without-* | --x) ++ case "$ac_configure_args0 " in ++ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; ++ esac ++ ;; ++ -* ) ac_must_keep_next=true ;; ++ esac ++ fi ++ ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" ++ # Get rid of the leading space. ++ ac_sep=" " ++ ;; ++ esac ++ done ++done ++$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } ++$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } ++ ++# When interrupted or exit'd, cleanup temporary files, and complete ++# config.log. We remove comments because anyway the quotes in there ++# would cause problems or look ugly. ++# WARNING: Be sure not to use single quotes in there, as some shells, ++# such as our DU 5.0 friend, will then `close' the trap. ++trap 'exit_status=$? ++ # Save into config.log some information that might help in debugging. ++ { ++ echo ++ ++ cat <<\_ASBOX ++## ---------------- ## ++## Cache variables. ## ++## ---------------- ## ++_ASBOX ++ echo ++ # The following way of writing the cache mishandles newlines in values, ++{ ++ (set) 2>&1 | ++ case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in ++ *ac_space=\ *) ++ sed -n \ ++ "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" ++ ;; ++ *) ++ sed -n \ ++ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ++ ;; ++ esac; ++} ++ echo ++ ++ cat <<\_ASBOX ++## ----------------- ## ++## Output variables. ## ++## ----------------- ## ++_ASBOX ++ echo ++ for ac_var in $ac_subst_vars ++ do ++ eval ac_val=$`echo $ac_var` ++ echo "$ac_var='"'"'$ac_val'"'"'" ++ done | sort ++ echo ++ ++ if test -n "$ac_subst_files"; then ++ cat <<\_ASBOX ++## ------------- ## ++## Output files. ## ++## ------------- ## ++_ASBOX ++ echo ++ for ac_var in $ac_subst_files ++ do ++ eval ac_val=$`echo $ac_var` ++ echo "$ac_var='"'"'$ac_val'"'"'" ++ done | sort ++ echo ++ fi ++ ++ if test -s confdefs.h; then ++ cat <<\_ASBOX ++## ----------- ## ++## confdefs.h. ## ++## ----------- ## ++_ASBOX ++ echo ++ sed "/^$/d" confdefs.h | sort ++ echo ++ fi ++ test "$ac_signal" != 0 && ++ echo "$as_me: caught signal $ac_signal" ++ echo "$as_me: exit $exit_status" ++ } >&5 ++ rm -f core *.core && ++ rm -rf conftest* confdefs* conf$$* $ac_clean_files && ++ exit $exit_status ++ ' 0 ++for ac_signal in 1 2 13 15; do ++ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal ++done ++ac_signal=0 ++ ++# confdefs.h avoids OS command line length limits that DEFS can exceed. ++rm -rf conftest* confdefs.h ++# AIX cpp loses on an empty file, so make sure it contains at least a newline. ++echo >confdefs.h + ++# Predefined preprocessor variables. ++ ++cat >>confdefs.h <<_ACEOF ++#define PACKAGE_NAME "$PACKAGE_NAME" ++_ACEOF ++ ++ ++cat >>confdefs.h <<_ACEOF ++#define PACKAGE_TARNAME "$PACKAGE_TARNAME" ++_ACEOF ++ ++ ++cat >>confdefs.h <<_ACEOF ++#define PACKAGE_VERSION "$PACKAGE_VERSION" ++_ACEOF ++ ++ ++cat >>confdefs.h <<_ACEOF ++#define PACKAGE_STRING "$PACKAGE_STRING" ++_ACEOF ++ ++ ++cat >>confdefs.h <<_ACEOF ++#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" ++_ACEOF ++ ++ ++# Let the site file select an alternate cache file if it wants to. + # Prefer explicitly selected file to automatically selected ones. + if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then +@@ -658,41 +1400,106 @@ + fi + for ac_site_file in $CONFIG_SITE; do + if test -r "$ac_site_file"; then +- echo "loading site script $ac_site_file" ++ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 ++echo "$as_me: loading site script $ac_site_file" >&6;} ++ sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" + fi + done + + if test -r "$cache_file"; then +- echo "loading cache $cache_file" +- . $cache_file ++ # Some versions of bash will fail to source /dev/null (special ++ # files actually), so we avoid doing that. ++ if test -f "$cache_file"; then ++ { echo "$as_me:$LINENO: loading cache $cache_file" >&5 ++echo "$as_me: loading cache $cache_file" >&6;} ++ case $cache_file in ++ [\\/]* | ?:[\\/]* ) . $cache_file;; ++ *) . ./$cache_file;; ++ esac ++ fi + else +- echo "creating cache $cache_file" +- > $cache_file ++ { echo "$as_me:$LINENO: creating cache $cache_file" >&5 ++echo "$as_me: creating cache $cache_file" >&6;} ++ >$cache_file ++fi ++ ++# Check that the precious variables saved in the cache have kept the same ++# value. ++ac_cache_corrupted=false ++for ac_var in `(set) 2>&1 | ++ sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do ++ eval ac_old_set=\$ac_cv_env_${ac_var}_set ++ eval ac_new_set=\$ac_env_${ac_var}_set ++ eval ac_old_val="\$ac_cv_env_${ac_var}_value" ++ eval ac_new_val="\$ac_env_${ac_var}_value" ++ case $ac_old_set,$ac_new_set in ++ set,) ++ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 ++echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ++ ac_cache_corrupted=: ;; ++ ,set) ++ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 ++echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ++ ac_cache_corrupted=: ;; ++ ,);; ++ *) ++ if test "x$ac_old_val" != "x$ac_new_val"; then ++ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 ++echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ++ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 ++echo "$as_me: former value: $ac_old_val" >&2;} ++ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 ++echo "$as_me: current value: $ac_new_val" >&2;} ++ ac_cache_corrupted=: ++ fi;; ++ esac ++ # Pass precious variables to config.status. ++ if test "$ac_new_set" = set; then ++ case $ac_new_val in ++ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) ++ ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; ++ *) ac_arg=$ac_var=$ac_new_val ;; ++ esac ++ case " $ac_configure_args " in ++ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. ++ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; ++ esac ++ fi ++done ++if $ac_cache_corrupted; then ++ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 ++echo "$as_me: error: changes in the environment can compromise the build" >&2;} ++ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 ++echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} ++ { (exit 1); exit 1; }; } + fi + + ac_ext=c +-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. + ac_cpp='$CPP $CPPFLAGS' +-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +-cross_compiling=$ac_cv_prog_cc_cross +- +-ac_exeext= +-ac_objext=o +-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then +- # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. +- if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then +- ac_n= ac_c=' +-' ac_t=' ' +- else +- ac_n=-n ac_c= ac_t= +- fi +-else +- ac_n= ac_c='\c' ac_t= +-fi ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++ ++ ++ ++ ++ ++ ++ ++ + + ++ ++ ++ ++ ++ ++ ++ ++ ++am__api_version="1.9" + ac_aux_dir= + for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do + if test -f $ac_dir/install-sh; then +@@ -703,14 +1510,20 @@ + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break ++ elif test -f $ac_dir/shtool; then ++ ac_aux_dir=$ac_dir ++ ac_install_sh="$ac_aux_dir/shtool install -c" ++ break + fi + done + if test -z "$ac_aux_dir"; then +- { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; } +-fi +-ac_config_guess=$ac_aux_dir/config.guess +-ac_config_sub=$ac_aux_dir/config.sub +-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. ++ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 ++echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ac_config_guess="$SHELL $ac_aux_dir/config.guess" ++ac_config_sub="$SHELL $ac_aux_dir/config.sub" ++ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. + + # Find a good install program. We prefer a C program (faster), + # so one script is as good as another. But avoid the broken or +@@ -719,440 +1532,1061 @@ + # SunOS /usr/etc/install + # IRIX /sbin/install + # AIX /bin/install ++# AmigaOS /C/install, which installs bootblocks on floppy discs + # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag + # AFS /usr/afsws/bin/install, which mishandles nonexistent args + # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" ++# OS/2's system install, which has a completely different semantic + # ./install, which can be erroneously created by make from ./install.sh. +-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 +-echo "configure:728: checking for a BSD compatible install" >&5 ++echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 ++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 + if test -z "$INSTALL"; then +-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++if test "${ac_cv_path_install+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" +- for ac_dir in $PATH; do +- # Account for people who put trailing slashes in PATH elements. +- case "$ac_dir/" in +- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; +- *) +- # OSF1 and SCO ODT 3.0 have their own names for install. +- # Don't use installbsd from OSF since it installs stuff as root +- # by default. +- for ac_prog in ginstall scoinst install; do +- if test -f $ac_dir/$ac_prog; then ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ # Account for people who put trailing slashes in PATH elements. ++case $as_dir/ in ++ ./ | .// | /cC/* | \ ++ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ++ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ ++ /usr/ucb/* ) ;; ++ *) ++ # OSF1 and SCO ODT 3.0 have their own names for install. ++ # Don't use installbsd from OSF since it installs stuff as root ++ # by default. ++ for ac_prog in ginstall scoinst install; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && +- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then ++ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : ++ elif test $ac_prog = install && ++ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then ++ # program-specific install script used by HP pwplus--don't use. ++ : + else +- ac_cv_path_install="$ac_dir/$ac_prog -c" +- break 2 ++ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" ++ break 3 + fi + fi + done +- ;; +- esac +- done +- IFS="$ac_save_IFS" ++ done ++ ;; ++esac ++done ++ + + fi + if test "${ac_cv_path_install+set}" = set; then +- INSTALL="$ac_cv_path_install" ++ INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. We don't cache a + # path for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the path is relative. +- INSTALL="$ac_install_sh" ++ INSTALL=$ac_install_sh + fi + fi +-echo "$ac_t""$INSTALL" 1>&6 ++echo "$as_me:$LINENO: result: $INSTALL" >&5 ++echo "${ECHO_T}$INSTALL" >&6 + + # Use test -z because SunOS4 sh mishandles braces in ${var-val}. + # It thinks the first close brace ends the variable substitution. + test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' ++test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 +-echo "configure:781: checking whether build environment is sane" >&5 ++echo "$as_me:$LINENO: checking whether build environment is sane" >&5 ++echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 + # Just in case + sleep 1 +-echo timestamp > conftestfile ++echo timestamp > conftest.file + # Do `set' in a subshell so we don't clobber the current shell's + # arguments. Must try -L first in case configure is actually a + # symlink; some systems play weird games with the mod time of symlinks + # (eg FreeBSD returns the mod time of the symlink's containing + # directory). + if ( +- set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` ++ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. +- set X `ls -t $srcdir/configure conftestfile` ++ set X `ls -t $srcdir/configure conftest.file` + fi +- if test "$*" != "X $srcdir/configure conftestfile" \ +- && test "$*" != "X conftestfile $srcdir/configure"; then ++ rm -f conftest.file ++ if test "$*" != "X $srcdir/configure conftest.file" \ ++ && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". +- { echo "configure: error: ls -t appears to fail. Make sure there is not a broken +-alias in your environment" 1>&2; exit 1; } ++ { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken ++alias in your environment" >&5 ++echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken ++alias in your environment" >&2;} ++ { (exit 1); exit 1; }; } + fi + +- test "$2" = conftestfile ++ test "$2" = conftest.file + ) + then + # Ok. + : + else +- { echo "configure: error: newly created file is older than distributed files! +-Check your system clock" 1>&2; exit 1; } +-fi +-rm -f conftest* +-echo "$ac_t""yes" 1>&6 +-if test "$program_transform_name" = s,x,x,; then +- program_transform_name= +-else +- # Double any \ or $. echo might interpret backslashes. +- cat <<\EOF_SED > conftestsed +-s,\\,\\\\,g; s,\$,$$,g +-EOF_SED +- program_transform_name="`echo $program_transform_name|sed -f conftestsed`" +- rm -f conftestsed ++ { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! ++Check your system clock" >&5 ++echo "$as_me: error: newly created file is older than distributed files! ++Check your system clock" >&2;} ++ { (exit 1); exit 1; }; } + fi ++echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6 + test "$program_prefix" != NONE && +- program_transform_name="s,^,${program_prefix},; $program_transform_name" ++ program_transform_name="s,^,$program_prefix,;$program_transform_name" + # Use a double $ so make ignores it. + test "$program_suffix" != NONE && +- program_transform_name="s,\$\$,${program_suffix},; $program_transform_name" ++ program_transform_name="s,\$,$program_suffix,;$program_transform_name" ++# Double any \ or $. echo might interpret backslashes. ++# By default was `s,x,x', remove it if useless. ++cat <<\_ACEOF >conftest.sed ++s/[\\$]/&&/g;s/;s,x,x,$// ++_ACEOF ++program_transform_name=`echo $program_transform_name | sed -f conftest.sed` ++rm conftest.sed ++ ++# expand $ac_aux_dir to an absolute path ++am_aux_dir=`cd $ac_aux_dir && pwd` ++ ++test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" ++# Use eval to expand $SHELL ++if eval "$MISSING --run true"; then ++ am_missing_run="$MISSING --run " ++else ++ am_missing_run= ++ { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 ++echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} ++fi ++ ++if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then ++ # We used to keeping the `.' as first argument, in order to ++ # allow $(mkdir_p) to be used without argument. As in ++ # $(mkdir_p) $(somedir) ++ # where $(somedir) is conditionally defined. However this is wrong ++ # for two reasons: ++ # 1. if the package is installed by a user who cannot write `.' ++ # make install will fail, ++ # 2. the above comment should most certainly read ++ # $(mkdir_p) $(DESTDIR)$(somedir) ++ # so it does not work when $(somedir) is undefined and ++ # $(DESTDIR) is not. ++ # To support the latter case, we have to write ++ # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), ++ # so the `.' trick is pointless. ++ mkdir_p='mkdir -p --' ++else ++ # On NextStep and OpenStep, the `mkdir' command does not ++ # recognize any option. It will interpret all options as ++ # directories to create, and then abort because `.' already ++ # exists. ++ for d in ./-p ./--version; ++ do ++ test -d $d && rmdir $d ++ done ++ # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. ++ if test -f "$ac_aux_dir/mkinstalldirs"; then ++ mkdir_p='$(mkinstalldirs)' ++ else ++ mkdir_p='$(install_sh) -d' ++ fi ++fi ++ ++for ac_prog in gawk mawk nawk awk ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++if test "${ac_cv_prog_AWK+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$AWK"; then ++ ac_cv_prog_AWK="$AWK" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_prog_AWK="$ac_prog" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++ ++fi ++fi ++AWK=$ac_cv_prog_AWK ++if test -n "$AWK"; then ++ echo "$as_me:$LINENO: result: $AWK" >&5 ++echo "${ECHO_T}$AWK" >&6 ++else ++ echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6 ++fi + +-# sed with no file args requires a program. +-test "$program_transform_name" = "" && program_transform_name="s,x,x," ++ test -n "$AWK" && break ++done + +-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 +-echo "configure:838: checking whether ${MAKE-make} sets \${MAKE}" >&5 +-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` +-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 ++echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 ++set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` ++if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- cat > conftestmake <<\EOF ++ cat >conftest.make <<\_ACEOF + all: +- @echo 'ac_maketemp="${MAKE}"' +-EOF ++ @echo 'ac_maketemp="$(MAKE)"' ++_ACEOF + # GNU make sometimes prints "make[1]: Entering...", which would confuse us. +-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` ++eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` + if test -n "$ac_maketemp"; then + eval ac_cv_prog_make_${ac_make}_set=yes + else + eval ac_cv_prog_make_${ac_make}_set=no + fi +-rm -f conftestmake ++rm -f conftest.make + fi + if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then +- echo "$ac_t""yes" 1>&6 ++ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6 + SET_MAKE= + else +- echo "$ac_t""no" 1>&6 ++ echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6 + SET_MAKE="MAKE=${MAKE-make}" + fi + ++rm -rf .tst 2>/dev/null ++mkdir .tst 2>/dev/null ++if test -d .tst; then ++ am__leading_dot=. ++else ++ am__leading_dot=_ ++fi ++rmdir .tst 2>/dev/null ++ ++# test to see if srcdir already configured ++if test "`cd $srcdir && pwd`" != "`pwd`" && ++ test -f $srcdir/config.status; then ++ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 ++echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++# test whether we have cygpath ++if test -z "$CYGPATH_W"; then ++ if (cygpath --version) >/dev/null 2>/dev/null; then ++ CYGPATH_W='cygpath -w' ++ else ++ CYGPATH_W=echo ++ fi ++fi ++ + +-PACKAGE=KXL ++# Define the identity of the package. ++ PACKAGE=KXL ++ VERSION=1.1.7 + +-VERSION=1.1.7 + +-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then +- { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; } +-fi +-cat >> confdefs.h <>confdefs.h <<_ACEOF + #define PACKAGE "$PACKAGE" +-EOF ++_ACEOF + +-cat >> confdefs.h <>confdefs.h <<_ACEOF + #define VERSION "$VERSION" +-EOF ++_ACEOF ++ ++# Some tools Automake needs. ++ ++ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} ++ ++ ++AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} ++ ++ ++AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} ++ ++ ++AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} ++ ++ ++MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} ++ ++install_sh=${install_sh-"$am_aux_dir/install-sh"} ++ ++# Installed binaries are usually stripped using `strip' when the user ++# run `make install-strip'. However `strip' might not be the right ++# tool to use in cross-compilation environments, therefore Automake ++# will honor the `STRIP' environment variable to overrule this program. ++if test "$cross_compiling" != no; then ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. ++set dummy ${ac_tool_prefix}strip; ac_word=$2 ++echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++if test "${ac_cv_prog_STRIP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$STRIP"; then ++ ac_cv_prog_STRIP="$STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_prog_STRIP="${ac_tool_prefix}strip" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++ ++fi ++fi ++STRIP=$ac_cv_prog_STRIP ++if test -n "$STRIP"; then ++ echo "$as_me:$LINENO: result: $STRIP" >&5 ++echo "${ECHO_T}$STRIP" >&6 ++else ++ echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6 ++fi + ++fi ++if test -z "$ac_cv_prog_STRIP"; then ++ ac_ct_STRIP=$STRIP ++ # Extract the first word of "strip", so it can be a program name with args. ++set dummy strip; ac_word=$2 ++echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_STRIP"; then ++ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_prog_ac_ct_STRIP="strip" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done + ++ test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" ++fi ++fi ++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP ++if test -n "$ac_ct_STRIP"; then ++ echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 ++echo "${ECHO_T}$ac_ct_STRIP" >&6 ++else ++ echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6 ++fi + +-missing_dir=`cd $ac_aux_dir && pwd` +-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 +-echo "configure:884: checking for working aclocal" >&5 +-# Run test in a subshell; some versions of sh will print an error if +-# an executable is not found, even if stderr is redirected. +-# Redirect stdin to placate older versions of autoconf. Sigh. +-if (aclocal --version) < /dev/null > /dev/null 2>&1; then +- ACLOCAL=aclocal +- echo "$ac_t""found" 1>&6 +-else +- ACLOCAL="$missing_dir/missing aclocal" +- echo "$ac_t""missing" 1>&6 +-fi +- +-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 +-echo "configure:897: checking for working autoconf" >&5 +-# Run test in a subshell; some versions of sh will print an error if +-# an executable is not found, even if stderr is redirected. +-# Redirect stdin to placate older versions of autoconf. Sigh. +-if (autoconf --version) < /dev/null > /dev/null 2>&1; then +- AUTOCONF=autoconf +- echo "$ac_t""found" 1>&6 +-else +- AUTOCONF="$missing_dir/missing autoconf" +- echo "$ac_t""missing" 1>&6 +-fi +- +-echo $ac_n "checking for working automake""... $ac_c" 1>&6 +-echo "configure:910: checking for working automake" >&5 +-# Run test in a subshell; some versions of sh will print an error if +-# an executable is not found, even if stderr is redirected. +-# Redirect stdin to placate older versions of autoconf. Sigh. +-if (automake --version) < /dev/null > /dev/null 2>&1; then +- AUTOMAKE=automake +- echo "$ac_t""found" 1>&6 +-else +- AUTOMAKE="$missing_dir/missing automake" +- echo "$ac_t""missing" 1>&6 +-fi +- +-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 +-echo "configure:923: checking for working autoheader" >&5 +-# Run test in a subshell; some versions of sh will print an error if +-# an executable is not found, even if stderr is redirected. +-# Redirect stdin to placate older versions of autoconf. Sigh. +-if (autoheader --version) < /dev/null > /dev/null 2>&1; then +- AUTOHEADER=autoheader +- echo "$ac_t""found" 1>&6 +-else +- AUTOHEADER="$missing_dir/missing autoheader" +- echo "$ac_t""missing" 1>&6 +-fi +- +-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 +-echo "configure:936: checking for working makeinfo" >&5 +-# Run test in a subshell; some versions of sh will print an error if +-# an executable is not found, even if stderr is redirected. +-# Redirect stdin to placate older versions of autoconf. Sigh. +-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then +- MAKEINFO=makeinfo +- echo "$ac_t""found" 1>&6 ++ STRIP=$ac_ct_STRIP + else +- MAKEINFO="$missing_dir/missing makeinfo" +- echo "$ac_t""missing" 1>&6 ++ STRIP="$ac_cv_prog_STRIP" + fi + ++fi ++INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" ++ ++# We need awk for the "check" target. The system "awk" is bad on ++# some platforms. ++# Always define AMTAR for backward compatibility. ++ ++AMTAR=${AMTAR-"${am_missing_run}tar"} ++ ++am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' ++ ++ ++ ++ ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. ++set dummy ${ac_tool_prefix}gcc; ac_word=$2 ++echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++if test "${ac_cv_prog_CC+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$CC"; then ++ ac_cv_prog_CC="$CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_prog_CC="${ac_tool_prefix}gcc" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++ ++fi ++fi ++CC=$ac_cv_prog_CC ++if test -n "$CC"; then ++ echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6 ++else ++ echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6 ++fi + +-# Extract the first word of "gcc", so it can be a program name with args. ++fi ++if test -z "$ac_cv_prog_CC"; then ++ ac_ct_CC=$CC ++ # Extract the first word of "gcc", so it can be a program name with args. + set dummy gcc; ac_word=$2 +-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +-echo "configure:952: checking for $ac_word" >&5 +-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++if test "${ac_cv_prog_ac_ct_CC+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_CC"; then ++ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_prog_ac_ct_CC="gcc" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++ ++fi ++fi ++ac_ct_CC=$ac_cv_prog_ac_ct_CC ++if test -n "$ac_ct_CC"; then ++ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6 ++else ++ echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6 ++fi ++ ++ CC=$ac_ct_CC ++else ++ CC="$ac_cv_prog_CC" ++fi ++ ++if test -z "$CC"; then ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. ++set dummy ${ac_tool_prefix}cc; ac_word=$2 ++echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++if test "${ac_cv_prog_CC+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. + else +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" +- ac_dummy="$PATH" +- for ac_dir in $ac_dummy; do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$ac_word; then +- ac_cv_prog_CC="gcc" +- break +- fi +- done +- IFS="$ac_save_ifs" ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_prog_CC="${ac_tool_prefix}cc" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++ + fi + fi +-CC="$ac_cv_prog_CC" ++CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$ac_t""$CC" 1>&6 ++ echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6 ++else ++ echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6 ++fi ++ ++fi ++if test -z "$ac_cv_prog_CC"; then ++ ac_ct_CC=$CC ++ # Extract the first word of "cc", so it can be a program name with args. ++set dummy cc; ac_word=$2 ++echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++if test "${ac_cv_prog_ac_ct_CC+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_CC"; then ++ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_prog_ac_ct_CC="cc" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++ ++fi ++fi ++ac_ct_CC=$ac_cv_prog_ac_ct_CC ++if test -n "$ac_ct_CC"; then ++ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6 ++else ++ echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6 ++fi ++ ++ CC=$ac_ct_CC + else +- echo "$ac_t""no" 1>&6 ++ CC="$ac_cv_prog_CC" + fi + ++fi + if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. + set dummy cc; ac_word=$2 +-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +-echo "configure:982: checking for $ac_word" >&5 +-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++if test "${ac_cv_prog_CC+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. + else +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_prog_rejected=no +- ac_dummy="$PATH" +- for ac_dir in $ac_dummy; do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$ac_word; then +- if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then +- ac_prog_rejected=yes +- continue +- fi +- ac_cv_prog_CC="cc" +- break +- fi +- done +- IFS="$ac_save_ifs" ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ++ ac_prog_rejected=yes ++ continue ++ fi ++ ac_cv_prog_CC="cc" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++ + if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift +- if test $# -gt 0; then ++ if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift +- set dummy "$ac_dir/$ac_word" "$@" +- shift +- ac_cv_prog_CC="$@" ++ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi + fi + fi + fi +-CC="$ac_cv_prog_CC" ++CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$ac_t""$CC" 1>&6 ++ echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6 + else +- echo "$ac_t""no" 1>&6 ++ echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6 + fi + +- if test -z "$CC"; then +- case "`uname -s`" in +- *win32* | *WIN32*) +- # Extract the first word of "cl", so it can be a program name with args. +-set dummy cl; ac_word=$2 +-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +-echo "configure:1033: checking for $ac_word" >&5 +-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++fi ++if test -z "$CC"; then ++ if test -n "$ac_tool_prefix"; then ++ for ac_prog in cl ++ do ++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. ++set dummy $ac_tool_prefix$ac_prog; ac_word=$2 ++echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++if test "${ac_cv_prog_CC+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. + else +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" +- ac_dummy="$PATH" +- for ac_dir in $ac_dummy; do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$ac_word; then +- ac_cv_prog_CC="cl" +- break +- fi +- done +- IFS="$ac_save_ifs" ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_prog_CC="$ac_tool_prefix$ac_prog" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++ + fi + fi +-CC="$ac_cv_prog_CC" ++CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$ac_t""$CC" 1>&6 ++ echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6 + else +- echo "$ac_t""no" 1>&6 ++ echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6 + fi +- ;; +- esac ++ ++ test -n "$CC" && break ++ done ++fi ++if test -z "$CC"; then ++ ac_ct_CC=$CC ++ for ac_prog in cl ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++if test "${ac_cv_prog_ac_ct_CC+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_CC"; then ++ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_prog_ac_ct_CC="$ac_prog" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 + fi +- test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } ++done ++done ++ ++fi ++fi ++ac_ct_CC=$ac_cv_prog_ac_ct_CC ++if test -n "$ac_ct_CC"; then ++ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6 ++else ++ echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6 + fi + +-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 +-echo "configure:1065: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ++ test -n "$ac_ct_CC" && break ++done + +-ac_ext=c +-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +-cross_compiling=$ac_cv_prog_cc_cross ++ CC=$ac_ct_CC ++fi + +-cat > conftest.$ac_ext << EOF ++fi + +-#line 1076 "configure" +-#include "confdefs.h" + +-main(){return(0);} +-EOF +-if { (eval echo configure:1081: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +- ac_cv_prog_cc_works=yes +- # If we can't run a trivial program, we are probably using a cross compiler. +- if (./conftest; exit) 2>/dev/null; then +- ac_cv_prog_cc_cross=no +- else +- ac_cv_prog_cc_cross=yes +- fi ++test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH ++See \`config.log' for more details." >&5 ++echo "$as_me: error: no acceptable C compiler found in \$PATH ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++ ++# Provide some information about the compiler. ++echo "$as_me:$LINENO:" \ ++ "checking for C compiler version" >&5 ++ac_compiler=`set X $ac_compile; echo $2` ++{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 ++ (eval $ac_compiler --version &5) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 ++ (eval $ac_compiler -v &5) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 ++ (eval $ac_compiler -V &5) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++ ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++ac_clean_files_save=$ac_clean_files ++ac_clean_files="$ac_clean_files a.out a.exe b.out" ++# Try to create an executable without -o first, disregard a.out. ++# It will help us diagnose broken compilers, and finding out an intuition ++# of exeext. ++echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 ++echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 ++ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` ++if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 ++ (eval $ac_link_default) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ # Find the output, starting from the most likely. This scheme is ++# not robust to junk in `.', hence go to wildcards (a.*) only as a last ++# resort. ++ ++# Be careful to initialize this variable, since it used to be cached. ++# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. ++ac_cv_exeext= ++# b.out is created by i960 compilers. ++for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out ++do ++ test -f "$ac_file" || continue ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ++ ;; ++ conftest.$ac_ext ) ++ # This is the source file. ++ ;; ++ [ab].out ) ++ # We found the default executable, but exeext='' is most ++ # certainly right. ++ break;; ++ *.* ) ++ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` ++ # FIXME: I believe we export ac_cv_exeext for Libtool, ++ # but it would be cool to find out if it's true. Does anybody ++ # maintain Libtool? --akim. ++ export ac_cv_exeext ++ break;; ++ * ) ++ break;; ++ esac ++done + else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- ac_cv_prog_cc_works=no ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++{ { echo "$as_me:$LINENO: error: C compiler cannot create executables ++See \`config.log' for more details." >&5 ++echo "$as_me: error: C compiler cannot create executables ++See \`config.log' for more details." >&2;} ++ { (exit 77); exit 77; }; } ++fi ++ ++ac_exeext=$ac_cv_exeext ++echo "$as_me:$LINENO: result: $ac_file" >&5 ++echo "${ECHO_T}$ac_file" >&6 ++ ++# Check the compiler produces executables we can run. If not, either ++# the compiler is broken, or we cross compile. ++echo "$as_me:$LINENO: checking whether the C compiler works" >&5 ++echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 ++# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 ++# If not cross compiling, check that we can run a simple program. ++if test "$cross_compiling" != yes; then ++ if { ac_try='./$ac_file' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ cross_compiling=no ++ else ++ if test "$cross_compiling" = maybe; then ++ cross_compiling=yes ++ else ++ { { echo "$as_me:$LINENO: error: cannot run C compiled programs. ++If you meant to cross compile, use \`--host'. ++See \`config.log' for more details." >&5 ++echo "$as_me: error: cannot run C compiled programs. ++If you meant to cross compile, use \`--host'. ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++ fi ++ fi + fi +-rm -fr conftest* +-ac_ext=c +-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +-cross_compiling=$ac_cv_prog_cc_cross +- +-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 +-if test $ac_cv_prog_cc_works = no; then +- { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } +-fi +-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 +-echo "configure:1107: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 +-cross_compiling=$ac_cv_prog_cc_cross +- +-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 +-echo "configure:1112: checking whether we are using GNU C" >&5 +-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +- ac_cv_prog_gcc=yes ++echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6 ++ ++rm -f a.out a.exe conftest$ac_cv_exeext b.out ++ac_clean_files=$ac_clean_files_save ++# Check the compiler produces executables we can run. If not, either ++# the compiler is broken, or we cross compile. ++echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 ++echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 ++echo "$as_me:$LINENO: result: $cross_compiling" >&5 ++echo "${ECHO_T}$cross_compiling" >&6 ++ ++echo "$as_me:$LINENO: checking for suffix of executables" >&5 ++echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ # If both `conftest.exe' and `conftest' are `present' (well, observable) ++# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will ++# work properly (i.e., refer to `conftest.exe'), while it won't with ++# `rm'. ++for ac_file in conftest.exe conftest conftest.*; do ++ test -f "$ac_file" || continue ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; ++ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` ++ export ac_cv_exeext ++ break;; ++ * ) break;; ++ esac ++done + else +- ac_cv_prog_gcc=no +-fi ++ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link ++See \`config.log' for more details." >&5 ++echo "$as_me: error: cannot compute suffix of executables: cannot compile and link ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } + fi + +-echo "$ac_t""$ac_cv_prog_gcc" 1>&6 ++rm -f conftest$ac_cv_exeext ++echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 ++echo "${ECHO_T}$ac_cv_exeext" >&6 ++ ++rm -f conftest.$ac_ext ++EXEEXT=$ac_cv_exeext ++ac_exeext=$EXEEXT ++echo "$as_me:$LINENO: checking for suffix of object files" >&5 ++echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 ++if test "${ac_cv_objext+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ + +-if test $ac_cv_prog_gcc = yes; then +- GCC=yes ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.o conftest.obj ++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; ++ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` ++ break;; ++ esac ++done + else +- GCC= ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile ++See \`config.log' for more details." >&5 ++echo "$as_me: error: cannot compute suffix of object files: cannot compile ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } + fi + +-ac_test_CFLAGS="${CFLAGS+set}" +-ac_save_CFLAGS="$CFLAGS" +-CFLAGS= +-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +-echo "configure:1140: checking whether ${CC-cc} accepts -g" >&5 +-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- echo 'void f(){}' > conftest.c +-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then ++rm -f conftest.$ac_cv_objext conftest.$ac_ext ++fi ++echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 ++echo "${ECHO_T}$ac_cv_objext" >&6 ++OBJEXT=$ac_cv_objext ++ac_objext=$OBJEXT ++echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 ++echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 ++if test "${ac_cv_c_compiler_gnu+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++#ifndef __GNUC__ ++ choke me ++#endif ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest.$ac_objext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_compiler_gnu=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ac_compiler_gnu=no ++fi ++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ac_cv_c_compiler_gnu=$ac_compiler_gnu ++ ++fi ++echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 ++echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 ++GCC=`test $ac_compiler_gnu = yes && echo yes` ++ac_test_CFLAGS=${CFLAGS+set} ++ac_save_CFLAGS=$CFLAGS ++CFLAGS="-g" ++echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 ++echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 ++if test "${ac_cv_prog_cc_g+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest.$ac_objext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then + ac_cv_prog_cc_g=yes + else +- ac_cv_prog_cc_g=no +-fi +-rm -f conftest* ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + ++ac_cv_prog_cc_g=no + fi +- +-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 ++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 ++echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 + if test "$ac_test_CFLAGS" = set; then +- CFLAGS="$ac_save_CFLAGS" ++ CFLAGS=$ac_save_CFLAGS + elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" +@@ -1166,262 +2600,638 @@ + CFLAGS= + fi + fi ++echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 ++echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 ++if test "${ac_cv_prog_cc_stdc+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_cv_prog_cc_stdc=no ++ac_save_CC=$CC ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++#include ++#include ++#include ++/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ ++struct buf { int x; }; ++FILE * (*rcsopen) (struct buf *, struct stat *, int); ++static char *e (p, i) ++ char **p; ++ int i; ++{ ++ return p[i]; ++} ++static char *f (char * (*g) (char **, int), char **p, ...) ++{ ++ char *s; ++ va_list v; ++ va_start (v,p); ++ s = g (p, va_arg (v,int)); ++ va_end (v); ++ return s; ++} + +-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 +-echo "configure:1172: checking for Cygwin environment" >&5 +-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +- rm -rf conftest* +- ac_cv_cygwin=yes ++/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has ++ function prototypes and stuff, but not '\xHH' hex character constants. ++ These don't provoke an error unfortunately, instead are silently treated ++ as 'x'. The following induces an error, until -std1 is added to get ++ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an ++ array size at least. It's necessary to write '\x00'==0 to get something ++ that's true only with -std1. */ ++int osf4_cc_array ['\x00' == 0 ? 1 : -1]; ++ ++int test (int i, double x); ++struct s1 {int (*f) (int a);}; ++struct s2 {int (*f) (double a);}; ++int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); ++int argc; ++char **argv; ++int ++main () ++{ ++return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ++ ; ++ return 0; ++} ++_ACEOF ++# Don't try gcc -ansi; that turns off useful extensions and ++# breaks some systems' header files. ++# AIX -qlanglvl=ansi ++# Ultrix and OSF/1 -std1 ++# HP-UX 10.20 and later -Ae ++# HP-UX older versions -Aa -D_HPUX_SOURCE ++# SVR4 -Xc -D__EXTENSIONS__ ++for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" ++do ++ CC="$ac_save_CC $ac_arg" ++ rm -f conftest.$ac_objext ++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest.$ac_objext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_cv_prog_cc_stdc=$ac_arg ++break + else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- ac_cv_cygwin=no ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ + fi +-rm -f conftest* +-rm -f conftest* ++rm -f conftest.err conftest.$ac_objext ++done ++rm -f conftest.$ac_ext conftest.$ac_objext ++CC=$ac_save_CC ++ + fi + +-echo "$ac_t""$ac_cv_cygwin" 1>&6 +-CYGWIN= +-test "$ac_cv_cygwin" = yes && CYGWIN=yes +-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 +-echo "configure:1205: checking for mingw32 environment" >&5 +-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++case "x$ac_cv_prog_cc_stdc" in ++ x|xno) ++ echo "$as_me:$LINENO: result: none needed" >&5 ++echo "${ECHO_T}none needed" >&6 ;; ++ *) ++ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 ++echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 ++ CC="$CC $ac_cv_prog_cc_stdc" ;; ++esac ++ ++# Some people use a C++ compiler to compile C. Since we use `exit', ++# in C++ we need to declare it. In case someone uses the same compiler ++# for both compiling C and C++ we need to have the C++ compiler decide ++# the declaration of exit, since it's the most demanding environment. ++cat >conftest.$ac_ext <<_ACEOF ++#ifndef __cplusplus ++ choke me ++#endif ++_ACEOF ++rm -f conftest.$ac_objext ++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest.$ac_objext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ for ac_declaration in \ ++ '' \ ++ 'extern "C" void std::exit (int) throw (); using std::exit;' \ ++ 'extern "C" void std::exit (int); using std::exit;' \ ++ 'extern "C" void exit (int) throw ();' \ ++ 'extern "C" void exit (int);' \ ++ 'void exit (int);' ++do ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++$ac_declaration ++#include ++int ++main () ++{ ++exit (42); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest.$ac_objext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ : + else +- cat > conftest.$ac_ext <&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-int main() { +-return __MINGW32__; +-; return 0; } +-EOF +-if { (eval echo configure:1217: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +- rm -rf conftest* +- ac_cv_mingw32=yes ++continue ++fi ++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++$ac_declaration ++int ++main () ++{ ++exit (42); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest.$ac_objext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ break + else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- ac_cv_mingw32=no ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ + fi ++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++done + rm -f conftest* +-rm -f conftest* ++if test -n "$ac_declaration"; then ++ echo '#ifdef __cplusplus' >>confdefs.h ++ echo $ac_declaration >>confdefs.h ++ echo '#endif' >>confdefs.h + fi + +-echo "$ac_t""$ac_cv_mingw32" 1>&6 +-MINGW32= +-test "$ac_cv_mingw32" = yes && MINGW32=yes +-echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 +-echo "configure:1234: checking how to run the C preprocessor" >&5 +-# On Suns, sometimes $CPP names a directory. +-if test -n "$CPP" && test -d "$CPP"; then +- CPP= +-fi +-if test -z "$CPP"; then +-if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 + else +- # This must be in double quotes, not single quotes, because CPP may get +- # substituted into the Makefile and "${CC-cc}" will confuse make. +- CPP="${CC-cc} -E" +- # On the NeXT, cc -E runs the code through the compiler's parser, +- # not just through cpp. +- cat > conftest.$ac_ext < +-Syntax Error +-EOF +-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +-{ (eval echo configure:1255: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +-if test -z "$ac_err"; then +- : ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++fi ++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++DEPDIR="${am__leading_dot}deps" ++ ++ ac_config_commands="$ac_config_commands depfiles" ++ ++ ++am_make=${MAKE-make} ++cat > confinc << 'END' ++am__doit: ++ @echo done ++.PHONY: am__doit ++END ++# If we don't find an include directive, just comment out the code. ++echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 ++echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 ++am__include="#" ++am__quote= ++_am_result=none ++# First try GNU make style include. ++echo "include confinc" > confmf ++# We grep out `Entering directory' and `Leaving directory' ++# messages which can occur if `w' ends up in MAKEFLAGS. ++# In particular we don't look at `^make:' because GNU make might ++# be invoked under some other name (usually "gmake"), in which ++# case it prints its new name instead of `make'. ++if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then ++ am__include=include ++ am__quote= ++ _am_result=GNU ++fi ++# Now try BSD make style include. ++if test "$am__include" = "#"; then ++ echo '.include "confinc"' > confmf ++ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then ++ am__include=.include ++ am__quote="\"" ++ _am_result=BSD ++ fi ++fi ++ ++ ++echo "$as_me:$LINENO: result: $_am_result" >&5 ++echo "${ECHO_T}$_am_result" >&6 ++rm -f confinc confmf ++ ++# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. ++if test "${enable_dependency_tracking+set}" = set; then ++ enableval="$enable_dependency_tracking" ++ ++fi; ++if test "x$enable_dependency_tracking" != xno; then ++ am_depcomp="$ac_aux_dir/depcomp" ++ AMDEPBACKSLASH='\' ++fi ++ ++ ++if test "x$enable_dependency_tracking" != xno; then ++ AMDEP_TRUE= ++ AMDEP_FALSE='#' + else +- echo "$ac_err" >&5 +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- CPP="${CC-cc} -E -traditional-cpp" +- cat > conftest.$ac_ext < +-Syntax Error +-EOF +-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +-{ (eval echo configure:1272: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +-if test -z "$ac_err"; then +- : ++ AMDEP_TRUE='#' ++ AMDEP_FALSE= ++fi ++ ++ ++ ++ ++depcc="$CC" am_compiler_list= ++ ++echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 ++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 ++if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- echo "$ac_err" >&5 +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- CPP="${CC-cc} -nologo -E" +- cat > conftest.$ac_ext < +-Syntax Error +-EOF +-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +-{ (eval echo configure:1289: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +-if test -z "$ac_err"; then +- : ++ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then ++ # We make a subdir and do the tests there. Otherwise we can end up ++ # making bogus files that we don't know about and never remove. For ++ # instance it was reported that on HP-UX the gcc test will end up ++ # making a dummy file named `D' -- because `-MD' means `put the output ++ # in D'. ++ mkdir conftest.dir ++ # Copy depcomp to subdir because otherwise we won't find it if we're ++ # using a relative directory. ++ cp "$am_depcomp" conftest.dir ++ cd conftest.dir ++ # We will build objects and dependencies in a subdirectory because ++ # it helps to detect inapplicable dependency modes. For instance ++ # both Tru64's cc and ICC support -MD to output dependencies as a ++ # side effect of compilation, but ICC will put the dependencies in ++ # the current directory while Tru64 will put them in the object ++ # directory. ++ mkdir sub ++ ++ am_cv_CC_dependencies_compiler_type=none ++ if test "$am_compiler_list" = ""; then ++ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` ++ fi ++ for depmode in $am_compiler_list; do ++ # Setup a source with many dependencies, because some compilers ++ # like to wrap large dependency lists on column 80 (with \), and ++ # we should not choose a depcomp mode which is confused by this. ++ # ++ # We need to recreate these files for each test, as the compiler may ++ # overwrite some of them when testing with obscure command lines. ++ # This happens at least with the AIX C compiler. ++ : > sub/conftest.c ++ for i in 1 2 3 4 5 6; do ++ echo '#include "conftst'$i'.h"' >> sub/conftest.c ++ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with ++ # Solaris 8's {/usr,}/bin/sh. ++ touch sub/conftst$i.h ++ done ++ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf ++ ++ case $depmode in ++ nosideeffect) ++ # after this tag, mechanisms are not by side-effect, so they'll ++ # only be used when explicitly requested ++ if test "x$enable_dependency_tracking" = xyes; then ++ continue ++ else ++ break ++ fi ++ ;; ++ none) break ;; ++ esac ++ # We check with `-c' and `-o' for the sake of the "dashmstdout" ++ # mode. It turns out that the SunPro C++ compiler does not properly ++ # handle `-M -o', and we need to detect this. ++ if depmode=$depmode \ ++ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ ++ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ ++ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ ++ >/dev/null 2>conftest.err && ++ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && ++ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then ++ # icc doesn't choke on unknown options, it will just issue warnings ++ # or remarks (even with -Werror). So we grep stderr for any message ++ # that says an option was ignored or not supported. ++ # When given -MP, icc 7.0 and 7.1 complain thusly: ++ # icc: Command line warning: ignoring option '-M'; no argument required ++ # The diagnosis changed in icc 8.0: ++ # icc: Command line remark: option '-MP' not supported ++ if (grep 'ignoring option' conftest.err || ++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else ++ am_cv_CC_dependencies_compiler_type=$depmode ++ break ++ fi ++ fi ++ done ++ ++ cd .. ++ rm -rf conftest.dir + else +- echo "$ac_err" >&5 +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- CPP=/lib/cpp +-fi +-rm -f conftest* ++ am_cv_CC_dependencies_compiler_type=none + fi +-rm -f conftest* +-fi +-rm -f conftest* +- ac_cv_prog_CPP="$CPP" ++ + fi +- CPP="$ac_cv_prog_CPP" ++echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 ++echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 ++CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type ++ ++ ++ ++if ++ test "x$enable_dependency_tracking" != xno \ ++ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then ++ am__fastdepCC_TRUE= ++ am__fastdepCC_FALSE='#' + else +- ac_cv_prog_CPP="$CPP" ++ am__fastdepCC_TRUE='#' ++ am__fastdepCC_FALSE= + fi +-echo "$ac_t""$CPP" 1>&6 ++ + + # Check whether --enable-shared or --disable-shared was given. + if test "${enable_shared+set}" = set; then + enableval="$enable_shared" + p=${PACKAGE-default} +-case $enableval in +-yes) enable_shared=yes ;; +-no) enable_shared=no ;; +-*) +- enable_shared=no +- # Look at the argument we got. We use all the common list separators. +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," +- for pkg in $enableval; do +- if test "X$pkg" = "X$p"; then +- enable_shared=yes +- fi +- done +- IFS="$ac_save_ifs" +- ;; +-esac ++ case $enableval in ++ yes) enable_shared=yes ;; ++ no) enable_shared=no ;; ++ *) ++ enable_shared=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_shared=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac + else + enable_shared=yes +-fi ++fi; + + # Check whether --enable-static or --disable-static was given. + if test "${enable_static+set}" = set; then + enableval="$enable_static" + p=${PACKAGE-default} +-case $enableval in +-yes) enable_static=yes ;; +-no) enable_static=no ;; +-*) +- enable_static=no +- # Look at the argument we got. We use all the common list separators. +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," +- for pkg in $enableval; do +- if test "X$pkg" = "X$p"; then +- enable_static=yes +- fi +- done +- IFS="$ac_save_ifs" +- ;; +-esac ++ case $enableval in ++ yes) enable_static=yes ;; ++ no) enable_static=no ;; ++ *) ++ enable_static=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_static=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac + else + enable_static=yes +-fi ++fi; + + # Check whether --enable-fast-install or --disable-fast-install was given. + if test "${enable_fast_install+set}" = set; then + enableval="$enable_fast_install" + p=${PACKAGE-default} +-case $enableval in +-yes) enable_fast_install=yes ;; +-no) enable_fast_install=no ;; +-*) +- enable_fast_install=no +- # Look at the argument we got. We use all the common list separators. +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," +- for pkg in $enableval; do +- if test "X$pkg" = "X$p"; then +- enable_fast_install=yes +- fi +- done +- IFS="$ac_save_ifs" +- ;; +-esac ++ case $enableval in ++ yes) enable_fast_install=yes ;; ++ no) enable_fast_install=no ;; ++ *) ++ enable_fast_install=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_fast_install=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac + else + enable_fast_install=yes +-fi +- ++fi; + + # Make sure we can run config.sub. +-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : +-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } ++$ac_config_sub sun4 >/dev/null 2>&1 || ++ { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 ++echo "$as_me: error: cannot run $ac_config_sub" >&2;} ++ { (exit 1); exit 1; }; } ++ ++echo "$as_me:$LINENO: checking build system type" >&5 ++echo $ECHO_N "checking build system type... $ECHO_C" >&6 ++if test "${ac_cv_build+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_cv_build_alias=$build_alias ++test -z "$ac_cv_build_alias" && ++ ac_cv_build_alias=`$ac_config_guess` ++test -z "$ac_cv_build_alias" && ++ { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 ++echo "$as_me: error: cannot guess build type; you must specify one" >&2;} ++ { (exit 1); exit 1; }; } ++ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || ++ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 ++echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} ++ { (exit 1); exit 1; }; } ++ ++fi ++echo "$as_me:$LINENO: result: $ac_cv_build" >&5 ++echo "${ECHO_T}$ac_cv_build" >&6 ++build=$ac_cv_build ++build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` ++build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` ++build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` ++ ++ ++echo "$as_me:$LINENO: checking host system type" >&5 ++echo $ECHO_N "checking host system type... $ECHO_C" >&6 ++if test "${ac_cv_host+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_cv_host_alias=$host_alias ++test -z "$ac_cv_host_alias" && ++ ac_cv_host_alias=$ac_cv_build_alias ++ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || ++ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 ++echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} ++ { (exit 1); exit 1; }; } ++ ++fi ++echo "$as_me:$LINENO: result: $ac_cv_host" >&5 ++echo "${ECHO_T}$ac_cv_host" >&6 ++host=$ac_cv_host ++host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` ++host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` ++host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` ++ ++ ++echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 ++echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6 ++if test "${lt_cv_path_SED+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ # Loop through the user's path and test for sed and gsed. ++# Then use that list of sed's as ones to test for truncation. ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for lt_ac_prog in sed gsed; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then ++ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" ++ fi ++ done ++ done ++done ++lt_ac_max=0 ++lt_ac_count=0 ++# Add /usr/xpg4/bin/sed as it is typically found on Solaris ++# along with /bin/sed that truncates output. ++for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do ++ test ! -f $lt_ac_sed && continue ++ cat /dev/null > conftest.in ++ lt_ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >conftest.in ++ # Check for GNU sed and select it if it is found. ++ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then ++ lt_cv_path_SED=$lt_ac_sed ++ break ++ fi ++ while true; do ++ cat conftest.in conftest.in >conftest.tmp ++ mv conftest.tmp conftest.in ++ cp conftest.in conftest.nl ++ echo >>conftest.nl ++ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break ++ cmp -s conftest.out conftest.nl || break ++ # 10000 chars as input seems more than enough ++ test $lt_ac_count -gt 10 && break ++ lt_ac_count=`expr $lt_ac_count + 1` ++ if test $lt_ac_count -gt $lt_ac_max; then ++ lt_ac_max=$lt_ac_count ++ lt_cv_path_SED=$lt_ac_sed ++ fi ++ done ++done ++ + fi + +-echo $ac_n "checking host system type""... $ac_c" 1>&6 +-echo "configure:1389: checking host system type" >&5 ++SED=$lt_cv_path_SED ++echo "$as_me:$LINENO: result: $SED" >&5 ++echo "${ECHO_T}$SED" >&6 ++ ++echo "$as_me:$LINENO: checking for egrep" >&5 ++echo $ECHO_N "checking for egrep... $ECHO_C" >&6 ++if test "${ac_cv_prog_egrep+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if echo a | (grep -E '(a|b)') >/dev/null 2>&1 ++ then ac_cv_prog_egrep='grep -E' ++ else ac_cv_prog_egrep='egrep' ++ fi ++fi ++echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 ++echo "${ECHO_T}$ac_cv_prog_egrep" >&6 ++ EGREP=$ac_cv_prog_egrep + +-host_alias=$host +-case "$host_alias" in +-NONE) +- case $nonopt in +- NONE) +- if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : +- else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } +- fi ;; +- *) host_alias=$nonopt ;; +- esac ;; +-esac + +-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` +-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +-echo "$ac_t""$host" 1>&6 +- +-echo $ac_n "checking build system type""... $ac_c" 1>&6 +-echo "configure:1410: checking build system type" >&5 +- +-build_alias=$build +-case "$build_alias" in +-NONE) +- case $nonopt in +- NONE) build_alias=$host_alias ;; +- *) build_alias=$nonopt ;; +- esac ;; +-esac +- +-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias` +-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +-echo "$ac_t""$build" 1>&6 + + # Check whether --with-gnu-ld or --without-gnu-ld was given. + if test "${with_gnu_ld+set}" = set; then +@@ -1429,13 +3239,12 @@ + test "$withval" = no || with_gnu_ld=yes + else + with_gnu_ld=no +-fi +- ++fi; + ac_prog=ld + if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. +- echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6 +-echo "configure:1439: checking for ld used by GCC" >&5 ++ echo "$as_me:$LINENO: checking for ld used by $CC" >&5 ++echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6 + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw +@@ -1445,12 +3254,12 @@ + esac + case $ac_prog in + # Accept absolute paths. +- [\\/]* | [A-Za-z]:[\\/]*) ++ [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' +- # Canonicalize the path of ld +- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` ++ # Canonicalize the pathname of ld ++ ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do +- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` ++ ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; +@@ -1464,32 +3273,36 @@ + ;; + esac + elif test "$with_gnu_ld" = yes; then +- echo $ac_n "checking for GNU ld""... $ac_c" 1>&6 +-echo "configure:1469: checking for GNU ld" >&5 ++ echo "$as_me:$LINENO: checking for GNU ld" >&5 ++echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 + else +- echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6 +-echo "configure:1472: checking for non-GNU ld" >&5 ++ echo "$as_me:$LINENO: checking for non-GNU ld" >&5 ++echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 + fi +-if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++if test "${lt_cv_path_LD+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -z "$LD"; then +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do ++ IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, +- # but apparently some GNU ld's only accept -v. ++ # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. +- if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then ++ case `"$lt_cv_path_LD" -v 2>&1 &6 ++ echo "$as_me:$LINENO: result: $LD" >&5 ++echo "${ECHO_T}$LD" >&6 + else +- echo "$ac_t""no" 1>&6 ++ echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6 + fi +-test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; } +-echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6 +-echo "configure:1507: checking if the linker ($LD) is GNU ld" >&5 +-if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- # I'd rather use --version here, but apparently some GNU ld's only accept -v. +-if $LD -v 2>&1 &5; then ++test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 ++echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} ++ { (exit 1); exit 1; }; } ++echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 ++echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 ++if test "${lt_cv_prog_gnu_ld+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ # I'd rather use --version here, but apparently some GNU lds only accept -v. ++case `$LD -v 2>&1 &6 ++echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 ++echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 + with_gnu_ld=$lt_cv_prog_gnu_ld + + +-echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6 +-echo "configure:1524: checking for $LD option to reload object files" >&5 +-if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 ++echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6 ++if test "${lt_cv_ld_reload_flag+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_ld_reload_flag='-r' + fi +- +-echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6 ++echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 ++echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6 + reload_flag=$lt_cv_ld_reload_flag +-test -n "$reload_flag" && reload_flag=" $reload_flag" ++case $reload_flag in ++"" | " "*) ;; ++*) reload_flag=" $reload_flag" ;; ++esac ++reload_cmds='$LD$reload_flag -o $output$reload_objs' ++case $host_os in ++ darwin*) ++ if test "$GCC" = yes; then ++ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' ++ else ++ reload_cmds='$LD$reload_flag -o $output$reload_objs' ++ fi ++ ;; ++esac + +-echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6 +-echo "configure:1536: checking for BSD-compatible nm" >&5 +-if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 ++echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6 ++if test "${lt_cv_path_NM+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" + else +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" +- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do +- test -z "$ac_dir" && ac_dir=. +- tmp_nm=$ac_dir/${ac_tool_prefix}nm +- if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then +- # Check to see if the nm accepts a BSD-compat flag. +- # Adding the `sed 1q' prevents false positives on HP-UX, which says: +- # nm: unknown option "B" ignored +- # Tru64's nm complains that /dev/null is an invalid object file +- if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then +- lt_cv_path_NM="$tmp_nm -B" +- break +- elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then +- lt_cv_path_NM="$tmp_nm -p" +- break +- else +- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but +- continue # so that we can try to find one that supports BSD flags ++ lt_nm_to_check="${ac_tool_prefix}nm" ++ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then ++ lt_nm_to_check="$lt_nm_to_check nm" ++ fi ++ for lt_tmp_nm in $lt_nm_to_check; do ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ tmp_nm="$ac_dir/$lt_tmp_nm" ++ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then ++ # Check to see if the nm accepts a BSD-compat flag. ++ # Adding the `sed 1q' prevents false positives on HP-UX, which says: ++ # nm: unknown option "B" ignored ++ # Tru64's nm complains that /dev/null is an invalid object file ++ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in ++ */dev/null* | *'Invalid file or object type'*) ++ lt_cv_path_NM="$tmp_nm -B" ++ break ++ ;; ++ *) ++ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in ++ */dev/null*) ++ lt_cv_path_NM="$tmp_nm -p" ++ break ++ ;; ++ *) ++ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but ++ continue # so that we can try to find one that supports BSD flags ++ ;; ++ esac ++ ;; ++ esac + fi +- fi ++ done ++ IFS="$lt_save_ifs" + done +- IFS="$ac_save_ifs" + test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm + fi + fi +- ++echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 ++echo "${ECHO_T}$lt_cv_path_NM" >&6 + NM="$lt_cv_path_NM" +-echo "$ac_t""$NM" 1>&6 + +-echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 +-echo "configure:1574: checking whether ln -s works" >&5 +-if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- rm -f conftestdata +-if ln -s X conftestdata 2>/dev/null +-then +- rm -f conftestdata +- ac_cv_prog_LN_S="ln -s" +-else +- ac_cv_prog_LN_S=ln +-fi +-fi +-LN_S="$ac_cv_prog_LN_S" +-if test "$ac_cv_prog_LN_S" = "ln -s"; then +- echo "$ac_t""yes" 1>&6 +-else +- echo "$ac_t""no" 1>&6 ++echo "$as_me:$LINENO: checking whether ln -s works" >&5 ++echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6 ++LN_S=$as_ln_s ++if test "$LN_S" = "ln -s"; then ++ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6 ++else ++ echo "$as_me:$LINENO: result: no, using $LN_S" >&5 ++echo "${ECHO_T}no, using $LN_S" >&6 + fi + +-echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6 +-echo "configure:1595: checking how to recognise dependant libraries" >&5 +-if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5 ++echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6 ++if test "${lt_cv_deplibs_check_method+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_file_magic_cmd='$MAGIC_CMD' + lt_cv_file_magic_test_file= +@@ -1604,8 +3442,8 @@ + # `unknown' -- same as none, but documents that we really don't know. + # 'pass_all' -- all dependencies passed with no checks. + # 'test_compile' -- check by making test program. +-# ['file_magic [regex]'] -- check by looking for files in library path +-# which responds to the $file_magic_cmd with a given egrep regex. ++# 'file_magic [[regex]]' -- check by looking for files in library path ++# which responds to the $file_magic_cmd with a given extended regex. + # If you have `file' or equivalent on your system and you're not sure + # whether `pass_all' will *always* work, you probably want this one. + +@@ -1618,37 +3456,36 @@ + lt_cv_deplibs_check_method=pass_all + ;; + +-bsdi4*) ++bsdi[45]*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +-cygwin* | mingw* | pw32*) ++cygwin*) ++ # func_win32_libid is a shell function defined in ltmain.sh ++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' ++ lt_cv_file_magic_cmd='func_win32_libid' ++ ;; ++ ++mingw* | pw32*) ++ # Base MSYS/MinGW do not provide the 'file' command needed by ++ # func_win32_libid shell function, so use a weaker test based on 'objdump'. + lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + + darwin* | rhapsody*) +- lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' +- lt_cv_file_magic_cmd='/usr/bin/file -L' +- case "$host_os" in +- rhapsody* | darwin1.012) +- lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1` +- ;; +- *) # Darwin 1.3 on +- lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' +- ;; +- esac ++ lt_cv_deplibs_check_method=pass_all + ;; + +-freebsd*) ++freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. +- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library' ++ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; +@@ -1662,50 +3499,49 @@ + lt_cv_deplibs_check_method=pass_all + ;; + +-hpux10.20*|hpux11*) +- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' ++hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file +- lt_cv_file_magic_test_file=/usr/lib/libc.sl +- ;; +- +-irix5* | irix6*) +- case $host_os in +- irix5*) +- # this will be overridden with pass_all, but let us keep it just in case +- lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" ++ case $host_cpu in ++ ia64*) ++ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' ++ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ++ ;; ++ hppa*64*) ++ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' ++ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) +- case $LD in +- *-32|*"-32 ") libmagic=32-bit;; +- *-n32|*"-n32 ") libmagic=N32;; +- *-64|*"-64 ") libmagic=64-bit;; +- *) libmagic=never-match;; +- esac +- # this will be overridden with pass_all, but let us keep it just in case +- lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1" ++ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' ++ lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac +- lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` ++ ;; ++ ++interix3*) ++ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' ++ ;; ++ ++irix5* | irix6* | nonstopux*) ++ case $LD in ++ *-32|*"-32 ") libmagic=32-bit;; ++ *-n32|*"-n32 ") libmagic=N32;; ++ *-64|*"-64 ") libmagic=64-bit;; ++ *) libmagic=never-match;; ++ esac + lt_cv_deplibs_check_method=pass_all + ;; + + # This must be Linux ELF. +-linux-gnu*) +- case $host_cpu in +- alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* | mips*el* ) +- lt_cv_deplibs_check_method=pass_all ;; +- *) +- # glibc up to 2.1.1 does not perform some relocations on ARM +- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; +- esac +- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` ++linux* | k*bsd*-gnu) ++ lt_cv_deplibs_check_method=pass_all + ;; + +-netbsd*) ++netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then +- lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$' ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + else +- lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$' ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' + fi + ;; + +@@ -1715,27 +3551,27 @@ + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +-osf3* | osf4* | osf5*) +- # this will be overridden with pass_all, but let us keep it just in case +- lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' +- lt_cv_file_magic_test_file=/shlib/libc.so +- lt_cv_deplibs_check_method=pass_all ++nto-qnx*) ++ lt_cv_deplibs_check_method=unknown + ;; + +-sco3.2v5*) +- lt_cv_deplibs_check_method=pass_all ++openbsd*) ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' ++ else ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' ++ fi + ;; + +-solaris*) ++osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all +- lt_cv_file_magic_test_file=/lib/libc.so + ;; + +-sysv5uw[78]* | sysv4*uw2*) ++solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) ++sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' +@@ -1753,1371 +3589,12464 @@ + lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; ++ siemens) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ pc) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + esac + ;; ++ ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + esac + + fi +- +-echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6 ++echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 ++echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6 + file_magic_cmd=$lt_cv_file_magic_cmd + deplibs_check_method=$lt_cv_deplibs_check_method ++test -z "$deplibs_check_method" && deplibs_check_method=unknown + +-echo $ac_n "checking for object suffix""... $ac_c" 1>&6 +-echo "configure:1768: checking for object suffix" >&5 +-if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- rm -f conftest* +-echo 'int i = 1;' > conftest.$ac_ext +-if { (eval echo configure:1774: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +- for ac_file in conftest.*; do +- case $ac_file in +- *.c) ;; +- *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;; +- esac +- done +-else +- { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; } +-fi +-rm -f conftest* +-fi + +-echo "$ac_t""$ac_cv_objext" 1>&6 +-OBJEXT=$ac_cv_objext +-ac_objext=$ac_cv_objext + + ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} + +-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 +-echo "configure:1794: checking for executable suffix" >&5 +-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- if test "$CYGWIN" = yes || test "$MINGW32" = yes; then +- ac_cv_exeext=.exe +-else +- rm -f conftest* +- echo 'int main () { return 0; }' > conftest.$ac_ext +- ac_cv_exeext= +- if { (eval echo configure:1804: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then +- for file in conftest.*; do +- case $file in +- *.c | *.o | *.obj) ;; +- *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; +- esac +- done +- else +- { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } +- fi +- rm -f conftest* +- test x"${ac_cv_exeext}" = x && ac_cv_exeext=no +-fi +-fi +- +-EXEEXT="" +-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} +-echo "$ac_t""${ac_cv_exeext}" 1>&6 +-ac_exeext=$EXEEXT +- +-if test $host != $build; then +- ac_tool_prefix=${host_alias}- +-else +- ac_tool_prefix= +-fi +- ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + ++# Allow CC to be a program name with arguments. ++compiler=$CC + + +-# Check for command to grab the raw symbol name followed by C symbol from nm. +-echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6 +-echo "configure:1835: checking command to parse $NM output" >&5 +-if eval "test \"`echo '$''{'lt_cv_sys_global_symbol_pipe'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- +-# These are sane defaults that work on at least a few old systems. +-# [They come from Ultrix. What could be older than Ultrix?!! ;)] +- +-# Character class describing NM global symbol codes. +-symcode='[BCDEGRST]' +- +-# Regexp to match symbols that can be accessed directly from C. +-sympat='\([_A-Za-z][_A-Za-z0-9]*\)' +- +-# Transform the above into a raw symbol and a C symbol. +-symxfrm='\1 \2\3 \3' ++# Check whether --enable-libtool-lock or --disable-libtool-lock was given. ++if test "${enable_libtool_lock+set}" = set; then ++ enableval="$enable_libtool_lock" + +-# Transform an extracted symbol line into a proper C declaration +-lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" ++fi; ++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +-# Define system-specific variables. +-case $host_os in +-aix*) +- symcode='[BCDT]' +- ;; +-cygwin* | mingw* | pw32*) +- symcode='[ABCDGISTW]' +- ;; +-hpux*) # Its linker distinguishes data from code symbols +- lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" +- ;; +-irix*) +- symcode='[BCDEGRST]' +- ;; +-solaris* | sysv5*) +- symcode='[BDT]' ++# Some flags need to be propagated to the compiler or linker for good ++# libtool support. ++case $host in ++ia64-*-hpux*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ case `/usr/bin/file conftest.$ac_objext` in ++ *ELF-32*) ++ HPUX_IA64_MODE="32" ++ ;; ++ *ELF-64*) ++ HPUX_IA64_MODE="64" ++ ;; ++ esac ++ fi ++ rm -rf conftest* + ;; +-sysv4) +- symcode='[DFNSTU]' ++*-*-irix6*) ++ # Find out which ABI we are using. ++ echo '#line 3657 "configure"' > conftest.$ac_ext ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ case `/usr/bin/file conftest.$ac_objext` in ++ *32-bit*) ++ LD="${LD-ld} -melf32bsmip" ++ ;; ++ *N32*) ++ LD="${LD-ld} -melf32bmipn32" ++ ;; ++ *64-bit*) ++ LD="${LD-ld} -melf64bmip" ++ ;; ++ esac ++ else ++ case `/usr/bin/file conftest.$ac_objext` in ++ *32-bit*) ++ LD="${LD-ld} -32" ++ ;; ++ *N32*) ++ LD="${LD-ld} -n32" ++ ;; ++ *64-bit*) ++ LD="${LD-ld} -64" ++ ;; ++ esac ++ fi ++ fi ++ rm -rf conftest* + ;; +-esac + +-# Handle CRLF in mingw tool chain +-opt_cr= +-case $host_os in +-mingw*) +- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp ++x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ case `/usr/bin/file conftest.o` in ++ *32-bit*) ++ case $host in ++ x86_64-*linux*) ++ LD="${LD-ld} -m elf_i386" ++ ;; ++ ppc64-*linux*|powerpc64-*linux*) ++ LD="${LD-ld} -m elf32ppclinux" ++ ;; ++ s390x-*linux*) ++ LD="${LD-ld} -m elf_s390" ++ ;; ++ sparc64-*linux*) ++ LD="${LD-ld} -m elf32_sparc" ++ ;; ++ esac ++ ;; ++ *64-bit*) ++ case $host in ++ x86_64-*linux*) ++ LD="${LD-ld} -m elf_x86_64" ++ ;; ++ ppc*-*linux*|powerpc*-*linux*) ++ LD="${LD-ld} -m elf64ppc" ++ ;; ++ s390*-*linux*) ++ LD="${LD-ld} -m elf64_s390" ++ ;; ++ sparc*-*linux*) ++ LD="${LD-ld} -m elf64_sparc" ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ rm -rf conftest* + ;; +-esac +- +-# If we're using GNU nm, then use its standard symbol codes. +-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then +- symcode='[ABCDGISTW]' +-fi + +-# Try without a prefix undercore, then with it. +-for ac_symprfx in "" "_"; do ++*-*-sco3.2v5*) ++ # On SCO OpenServer 5, we need -belf to get full-featured binaries. ++ SAVE_CFLAGS="$CFLAGS" ++ CFLAGS="$CFLAGS -belf" ++ echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 ++echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6 ++if test "${lt_cv_cc_needs_belf+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +- # Write the raw and C identifiers. +-lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" ++int ++main () ++{ + +- # Check to see that the pipe works correctly. +- pipe_works=no +- rm -f conftest* +- cat > conftest.$ac_ext <&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ lt_cv_cc_needs_belf=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +- if { (eval echo configure:1911: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +- # Now try to grab the symbols. +- nlist=conftest.nm +- if { (eval echo configure:1914: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5; } && test -s "$nlist"; then +- # Try sorting and uniquifying the output. +- if sort "$nlist" | uniq > "$nlist"T; then +- mv -f "$nlist"T "$nlist" +- else +- rm -f "$nlist"T +- fi ++lt_cv_cc_needs_belf=no ++fi ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++ ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu + +- # Make sure that we snagged all the symbols we need. +- if egrep ' nm_test_var$' "$nlist" >/dev/null; then +- if egrep ' nm_test_func$' "$nlist" >/dev/null; then +- cat < conftest.$ac_ext +-#ifdef __cplusplus +-extern "C" { +-#endif ++fi ++echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 ++echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6 ++ if test x"$lt_cv_cc_needs_belf" != x"yes"; then ++ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf ++ CFLAGS="$SAVE_CFLAGS" ++ fi ++ ;; ++sparc*-*solaris*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ case `/usr/bin/file conftest.o` in ++ *64-bit*) ++ case $lt_cv_prog_gnu_ld in ++ yes*) LD="${LD-ld} -m elf64_sparc" ;; ++ *) LD="${LD-ld} -64" ;; ++ esac ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; + +-EOF +- # Now generate the symbol file. +- eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext' + +- cat <> conftest.$ac_ext +-#if defined (__STDC__) && __STDC__ +-# define lt_ptr_t void * +-#else +-# define lt_ptr_t char * +-# define const +-#endif ++esac + +-/* The mapping between symbol names and symbols. */ +-const struct { +- const char *name; +- lt_ptr_t address; +-} +-lt_preloaded_symbols[] = +-{ +-EOF +- sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" >> conftest.$ac_ext +- cat <<\EOF >> conftest.$ac_ext +- {0, (lt_ptr_t) 0} +-}; ++need_locks="$enable_libtool_lock" + +-#ifdef __cplusplus +-} ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 ++echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 ++# On Suns, sometimes $CPP names a directory. ++if test -n "$CPP" && test -d "$CPP"; then ++ CPP= ++fi ++if test -z "$CPP"; then ++ if test "${ac_cv_prog_CPP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ # Double quotes because CPP needs to be expanded ++ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" ++ do ++ ac_preproc_ok=false ++for ac_c_preproc_warn_flag in '' yes ++do ++ # Use a header file that comes with gcc, so configuring glibc ++ # with a fresh cross-compiler works. ++ # Prefer to if __STDC__ is defined, since ++ # exists even on freestanding compilers. ++ # On the NeXT, cc -E runs the code through the compiler's parser, ++ # not just through cpp. "Syntax error" is here to catch this case. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#ifdef __STDC__ ++# include ++#else ++# include + #endif +-EOF +- # Now try linking the two files. +- mv conftest.$ac_objext conftstm.$ac_objext +- save_LIBS="$LIBS" +- save_CFLAGS="$CFLAGS" +- LIBS="conftstm.$ac_objext" +- CFLAGS="$CFLAGS$no_builtin_flag" +- if { (eval echo configure:1965: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +- pipe_works=yes +- fi +- LIBS="$save_LIBS" +- CFLAGS="$save_CFLAGS" +- else +- echo "cannot find nm_test_func in $nlist" >&5 +- fi +- else +- echo "cannot find nm_test_var in $nlist" >&5 +- fi +- else +- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 +- fi ++ Syntax error ++_ACEOF ++if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 ++ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null; then ++ if test -s conftest.err; then ++ ac_cpp_err=$ac_c_preproc_warn_flag ++ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else +- echo "$progname: failed program was:" >&5 +- cat conftest.$ac_ext >&5 ++ ac_cpp_err= + fi +- rm -f conftest* conftst* ++else ++ ac_cpp_err=yes ++fi ++if test -z "$ac_cpp_err"; then ++ : ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +- # Do not use the global_symbol_pipe unless it works. +- if test "$pipe_works" = yes; then +- break ++ # Broken: fails on valid input. ++continue ++fi ++rm -f conftest.err conftest.$ac_ext ++ ++ # OK, works on sane cases. Now check whether non-existent headers ++ # can be detected and how. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++_ACEOF ++if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 ++ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null; then ++ if test -s conftest.err; then ++ ac_cpp_err=$ac_c_preproc_warn_flag ++ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else +- lt_cv_sys_global_symbol_pipe= ++ ac_cpp_err= + fi +-done ++else ++ ac_cpp_err=yes ++fi ++if test -z "$ac_cpp_err"; then ++ # Broken: success on invalid input. ++continue ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + ++ # Passes both tests. ++ac_preproc_ok=: ++break + fi ++rm -f conftest.err conftest.$ac_ext ++ ++done ++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. ++rm -f conftest.err conftest.$ac_ext ++if $ac_preproc_ok; then ++ break ++fi ++ ++ done ++ ac_cv_prog_CPP=$CPP + +-global_symbol_pipe="$lt_cv_sys_global_symbol_pipe" +-if test -z "$lt_cv_sys_global_symbol_pipe"; then +- global_symbol_to_cdecl= +-else +- global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl" + fi +-if test -z "$global_symbol_pipe$global_symbol_to_cdecl"; then +- echo "$ac_t""failed" 1>&6 ++ CPP=$ac_cv_prog_CPP + else +- echo "$ac_t""ok" 1>&6 ++ ac_cv_prog_CPP=$CPP + fi +- +-for ac_hdr in dlfcn.h ++echo "$as_me:$LINENO: result: $CPP" >&5 ++echo "${ECHO_T}$CPP" >&6 ++ac_preproc_ok=false ++for ac_c_preproc_warn_flag in '' yes + do +-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +-echo "configure:2011: checking for $ac_hdr" >&5 +-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++ # Use a header file that comes with gcc, so configuring glibc ++ # with a fresh cross-compiler works. ++ # Prefer to if __STDC__ is defined, since ++ # exists even on freestanding compilers. ++ # On the NeXT, cc -E runs the code through the compiler's parser, ++ # not just through cpp. "Syntax error" is here to catch this case. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ Syntax error ++_ACEOF ++if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 ++ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null; then ++ if test -s conftest.err; then ++ ac_cpp_err=$ac_c_preproc_warn_flag ++ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag ++ else ++ ac_cpp_err= ++ fi + else +- cat > conftest.$ac_ext < +-EOF +-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +-{ (eval echo configure:2021: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +-if test -z "$ac_err"; then +- rm -rf conftest* +- eval "ac_cv_header_$ac_safe=yes" ++ ac_cpp_err=yes ++fi ++if test -z "$ac_cpp_err"; then ++ : + else +- echo "$ac_err" >&5 +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_header_$ac_safe=no" ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ # Broken: fails on valid input. ++continue + fi +-rm -f conftest* ++rm -f conftest.err conftest.$ac_ext ++ ++ # OK, works on sane cases. Now check whether non-existent headers ++ # can be detected and how. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++_ACEOF ++if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 ++ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null; then ++ if test -s conftest.err; then ++ ac_cpp_err=$ac_c_preproc_warn_flag ++ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag ++ else ++ ac_cpp_err= ++ fi ++else ++ ac_cpp_err=yes + fi +-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` +- cat >> confdefs.h <&6 ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ # Passes both tests. ++ac_preproc_ok=: ++break + fi ++rm -f conftest.err conftest.$ac_ext ++ + done ++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. ++rm -f conftest.err conftest.$ac_ext ++if $ac_preproc_ok; then ++ : ++else ++ { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check ++See \`config.log' for more details." >&5 ++echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++fi + ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++ ++echo "$as_me:$LINENO: checking for ANSI C header files" >&5 ++echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 ++if test "${ac_cv_header_stdc+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++#include ++#include ++#include + ++int ++main () ++{ + ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest.$ac_objext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_cv_header_stdc=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + ++ac_cv_header_stdc=no ++fi ++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +-# Only perform the check for file, if the check method requires it +-case $deplibs_check_method in +-file_magic*) +- if test "$file_magic_cmd" = '$MAGIC_CMD'; then +- echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6 +-echo "configure:2056: checking for ${ac_tool_prefix}file" >&5 +-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- case $MAGIC_CMD in +- /*) +- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. +- ;; +- ?:/*) +- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. +- ;; +- *) +- ac_save_MAGIC_CMD="$MAGIC_CMD" +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" +- ac_dummy="/usr/bin:$PATH" +- for ac_dir in $ac_dummy; do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/${ac_tool_prefix}file; then +- lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" +- if test -n "$file_magic_test_file"; then +- case $deplibs_check_method in +- "file_magic "*) +- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" +- MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | +- egrep "$file_magic_regex" > /dev/null; then +- : +- else +- cat <&2 ++if test $ac_cv_header_stdc = yes; then ++ # SunOS 4.x string.h does not declare mem*, contrary to ANSI. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include + +-*** Warning: the command libtool uses to detect shared libraries, +-*** $file_magic_cmd, produces output that libtool cannot recognize. +-*** The result is that libtool may fail to recognize shared libraries +-*** as such. This will affect the creation of libtool libraries that +-*** depend on shared libraries, but programs linked with such libtool +-*** libraries will work regardless of this problem. Nevertheless, you +-*** may want to report the problem to your system manager and/or to +-*** bug-libtool@gnu.org ++_ACEOF ++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | ++ $EGREP "memchr" >/dev/null 2>&1; then ++ : ++else ++ ac_cv_header_stdc=no ++fi ++rm -f conftest* + +-EOF +- fi ;; +- esac +- fi +- break +- fi +- done +- IFS="$ac_save_ifs" +- MAGIC_CMD="$ac_save_MAGIC_CMD" +- ;; +-esac + fi + +-MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +-if test -n "$MAGIC_CMD"; then +- echo "$ac_t""$MAGIC_CMD" 1>&6 ++if test $ac_cv_header_stdc = yes; then ++ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++ ++_ACEOF ++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | ++ $EGREP "free" >/dev/null 2>&1; then ++ : + else +- echo "$ac_t""no" 1>&6 ++ ac_cv_header_stdc=no + fi ++rm -f conftest* + +-if test -z "$lt_cv_path_MAGIC_CMD"; then +- if test -n "$ac_tool_prefix"; then +- echo $ac_n "checking for file""... $ac_c" 1>&6 +-echo "configure:2118: checking for file" >&5 +-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++fi ++ ++if test $ac_cv_header_stdc = yes; then ++ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. ++ if test "$cross_compiling" = yes; then ++ : + else +- case $MAGIC_CMD in +- /*) +- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. +- ;; +- ?:/*) +- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. +- ;; +- *) +- ac_save_MAGIC_CMD="$MAGIC_CMD" +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" +- ac_dummy="/usr/bin:$PATH" +- for ac_dir in $ac_dummy; do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/file; then +- lt_cv_path_MAGIC_CMD="$ac_dir/file" +- if test -n "$file_magic_test_file"; then +- case $deplibs_check_method in +- "file_magic "*) +- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" +- MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | +- egrep "$file_magic_regex" > /dev/null; then +- : +- else +- cat <&2 ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++#if ((' ' & 0x0FF) == 0x020) ++# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') ++# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) ++#else ++# define ISLOWER(c) \ ++ (('a' <= (c) && (c) <= 'i') \ ++ || ('j' <= (c) && (c) <= 'r') \ ++ || ('s' <= (c) && (c) <= 'z')) ++# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) ++#endif + +-*** Warning: the command libtool uses to detect shared libraries, +-*** $file_magic_cmd, produces output that libtool cannot recognize. +-*** The result is that libtool may fail to recognize shared libraries +-*** as such. This will affect the creation of libtool libraries that +-*** depend on shared libraries, but programs linked with such libtool +-*** libraries will work regardless of this problem. Nevertheless, you +-*** may want to report the problem to your system manager and/or to +-*** bug-libtool@gnu.org ++#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) ++int ++main () ++{ ++ int i; ++ for (i = 0; i < 256; i++) ++ if (XOR (islower (i), ISLOWER (i)) ++ || toupper (i) != TOUPPER (i)) ++ exit(2); ++ exit (0); ++} ++_ACEOF ++rm -f conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ac_try='./conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ : ++else ++ echo "$as_me: program exited with status $ac_status" >&5 ++echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-EOF +- fi ;; +- esac +- fi +- break +- fi +- done +- IFS="$ac_save_ifs" +- MAGIC_CMD="$ac_save_MAGIC_CMD" +- ;; +-esac ++( exit $ac_status ) ++ac_cv_header_stdc=no ++fi ++rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi ++fi ++fi ++echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 ++echo "${ECHO_T}$ac_cv_header_stdc" >&6 ++if test $ac_cv_header_stdc = yes; then ++ ++cat >>confdefs.h <<\_ACEOF ++#define STDC_HEADERS 1 ++_ACEOF ++ ++fi ++ ++# On IRIX 5.3, sys/types and inttypes.h are conflicting. ++ ++ ++ ++ ++ ++ ++ ++ ++ ++for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ ++ inttypes.h stdint.h unistd.h ++do ++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` ++echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 ++if eval "test \"\${$as_ac_Header+set}\" = set"; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++$ac_includes_default ++ ++#include <$ac_header> ++_ACEOF ++rm -f conftest.$ac_objext ++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest.$ac_objext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ eval "$as_ac_Header=yes" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++eval "$as_ac_Header=no" ++fi ++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 ++echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++if test `eval echo '${'$as_ac_Header'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++_ACEOF + +-MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +-if test -n "$MAGIC_CMD"; then +- echo "$ac_t""$MAGIC_CMD" 1>&6 +-else +- echo "$ac_t""no" 1>&6 + fi + ++done ++ ++ ++ ++for ac_header in dlfcn.h ++do ++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` ++if eval "test \"\${$as_ac_Header+set}\" = set"; then ++ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 ++if eval "test \"\${$as_ac_Header+set}\" = set"; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++fi ++echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 ++echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++else ++ # Is the header compilable? ++echo "$as_me:$LINENO: checking $ac_header usability" >&5 ++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++$ac_includes_default ++#include <$ac_header> ++_ACEOF ++rm -f conftest.$ac_objext ++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest.$ac_objext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_header_compiler=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ac_header_compiler=no ++fi ++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++# Is the header present? ++echo "$as_me:$LINENO: checking $ac_header presence" >&5 ++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include <$ac_header> ++_ACEOF ++if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 ++ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null; then ++ if test -s conftest.err; then ++ ac_cpp_err=$ac_c_preproc_warn_flag ++ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else +- MAGIC_CMD=: ++ ac_cpp_err= + fi ++else ++ ac_cpp_err=yes + fi ++if test -z "$ac_cpp_err"; then ++ ac_header_preproc=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +- fi +- ;; ++ ac_header_preproc=no ++fi ++rm -f conftest.err conftest.$ac_ext ++echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6 ++ ++# So? What about this header? ++case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in ++ yes:no: ) ++ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 ++echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 ++echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ++ ac_header_preproc=yes ++ ;; ++ no:yes:* ) ++ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 ++echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 ++echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 ++echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 ++echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 ++echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 ++echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ++ ( ++ cat <<\_ASBOX ++## ------------------------------------------ ## ++## Report this to the AC_PACKAGE_NAME lists. ## ++## ------------------------------------------ ## ++_ASBOX ++ ) | ++ sed "s/^/$as_me: WARNING: /" >&2 ++ ;; + esac +- +-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +-set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +-echo "configure:2189: checking for $ac_word" >&5 +-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- if test -n "$RANLIB"; then +- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. ++echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 ++if eval "test \"\${$as_ac_Header+set}\" = set"; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" +- ac_dummy="$PATH" +- for ac_dir in $ac_dummy; do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$ac_word; then +- ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" +- break +- fi +- done +- IFS="$ac_save_ifs" ++ eval "$as_ac_Header=\$ac_header_preproc" + fi ++echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 ++echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ + fi +-RANLIB="$ac_cv_prog_RANLIB" +-if test -n "$RANLIB"; then +- echo "$ac_t""$RANLIB" 1>&6 +-else +- echo "$ac_t""no" 1>&6 ++if test `eval echo '${'$as_ac_Header'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++_ACEOF ++ + fi + ++done + +-if test -z "$ac_cv_prog_RANLIB"; then ++ac_ext=cc ++ac_cpp='$CXXCPP $CPPFLAGS' ++ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + if test -n "$ac_tool_prefix"; then +- # Extract the first word of "ranlib", so it can be a program name with args. +-set dummy ranlib; ac_word=$2 +-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +-echo "configure:2221: checking for $ac_word" >&5 +-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++ for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC ++ do ++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. ++set dummy $ac_tool_prefix$ac_prog; ac_word=$2 ++echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++if test "${ac_cv_prog_CXX+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test -n "$RANLIB"; then +- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. ++ if test -n "$CXX"; then ++ ac_cv_prog_CXX="$CXX" # Let the user override the test. + else +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" +- ac_dummy="$PATH" +- for ac_dir in $ac_dummy; do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$ac_word; then +- ac_cv_prog_RANLIB="ranlib" +- break +- fi +- done +- IFS="$ac_save_ifs" +- test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++ + fi + fi +-RANLIB="$ac_cv_prog_RANLIB" +-if test -n "$RANLIB"; then +- echo "$ac_t""$RANLIB" 1>&6 ++CXX=$ac_cv_prog_CXX ++if test -n "$CXX"; then ++ echo "$as_me:$LINENO: result: $CXX" >&5 ++echo "${ECHO_T}$CXX" >&6 + else +- echo "$ac_t""no" 1>&6 ++ echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6 + fi + +-else +- RANLIB=":" +-fi ++ test -n "$CXX" && break ++ done + fi +- +-# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +-set dummy ${ac_tool_prefix}strip; ac_word=$2 +-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +-echo "configure:2256: checking for $ac_word" >&5 +-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++if test -z "$CXX"; then ++ ac_ct_CXX=$CXX ++ for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test -n "$STRIP"; then +- ac_cv_prog_STRIP="$STRIP" # Let the user override the test. ++ if test -n "$ac_ct_CXX"; then ++ ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. + else +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" +- ac_dummy="$PATH" +- for ac_dir in $ac_dummy; do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$ac_word; then +- ac_cv_prog_STRIP="${ac_tool_prefix}strip" +- break +- fi +- done +- IFS="$ac_save_ifs" ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_prog_ac_ct_CXX="$ac_prog" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++ + fi + fi +-STRIP="$ac_cv_prog_STRIP" +-if test -n "$STRIP"; then +- echo "$ac_t""$STRIP" 1>&6 ++ac_ct_CXX=$ac_cv_prog_ac_ct_CXX ++if test -n "$ac_ct_CXX"; then ++ echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 ++echo "${ECHO_T}$ac_ct_CXX" >&6 + else +- echo "$ac_t""no" 1>&6 ++ echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6 + fi + ++ test -n "$ac_ct_CXX" && break ++done ++test -n "$ac_ct_CXX" || ac_ct_CXX="g++" + +-if test -z "$ac_cv_prog_STRIP"; then +-if test -n "$ac_tool_prefix"; then +- # Extract the first word of "strip", so it can be a program name with args. +-set dummy strip; ac_word=$2 +-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +-echo "configure:2288: checking for $ac_word" >&5 +-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- if test -n "$STRIP"; then +- ac_cv_prog_STRIP="$STRIP" # Let the user override the test. ++ CXX=$ac_ct_CXX ++fi ++ ++ ++# Provide some information about the compiler. ++echo "$as_me:$LINENO:" \ ++ "checking for C++ compiler version" >&5 ++ac_compiler=`set X $ac_compile; echo $2` ++{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 ++ (eval $ac_compiler --version &5) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 ++ (eval $ac_compiler -v &5) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 ++ (eval $ac_compiler -V &5) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++ ++echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 ++echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6 ++if test "${ac_cv_cxx_compiler_gnu+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++#ifndef __GNUC__ ++ choke me ++#endif ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest.$ac_objext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_compiler_gnu=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ac_compiler_gnu=no ++fi ++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ac_cv_cxx_compiler_gnu=$ac_compiler_gnu ++ ++fi ++echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 ++echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6 ++GXX=`test $ac_compiler_gnu = yes && echo yes` ++ac_test_CXXFLAGS=${CXXFLAGS+set} ++ac_save_CXXFLAGS=$CXXFLAGS ++CXXFLAGS="-g" ++echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 ++echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6 ++if test "${ac_cv_prog_cxx_g+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest.$ac_objext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_cv_prog_cxx_g=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ac_cv_prog_cxx_g=no ++fi ++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 ++echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6 ++if test "$ac_test_CXXFLAGS" = set; then ++ CXXFLAGS=$ac_save_CXXFLAGS ++elif test $ac_cv_prog_cxx_g = yes; then ++ if test "$GXX" = yes; then ++ CXXFLAGS="-g -O2" ++ else ++ CXXFLAGS="-g" ++ fi + else +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" +- ac_dummy="$PATH" +- for ac_dir in $ac_dummy; do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$ac_word; then +- ac_cv_prog_STRIP="strip" +- break +- fi +- done +- IFS="$ac_save_ifs" +- test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":" ++ if test "$GXX" = yes; then ++ CXXFLAGS="-O2" ++ else ++ CXXFLAGS= ++ fi + fi ++for ac_declaration in \ ++ '' \ ++ 'extern "C" void std::exit (int) throw (); using std::exit;' \ ++ 'extern "C" void std::exit (int); using std::exit;' \ ++ 'extern "C" void exit (int) throw ();' \ ++ 'extern "C" void exit (int);' \ ++ 'void exit (int);' ++do ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++$ac_declaration ++#include ++int ++main () ++{ ++exit (42); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest.$ac_objext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ : ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++continue + fi +-STRIP="$ac_cv_prog_STRIP" +-if test -n "$STRIP"; then +- echo "$ac_t""$STRIP" 1>&6 ++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++$ac_declaration ++int ++main () ++{ ++exit (42); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest.$ac_objext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ break + else +- echo "$ac_t""no" 1>&6 ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ + fi ++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++done ++rm -f conftest* ++if test -n "$ac_declaration"; then ++ echo '#ifdef __cplusplus' >>confdefs.h ++ echo $ac_declaration >>confdefs.h ++ echo '#endif' >>confdefs.h ++fi ++ ++ac_ext=cc ++ac_cpp='$CXXCPP $CPPFLAGS' ++ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_cxx_compiler_gnu ++ ++depcc="$CXX" am_compiler_list= ++ ++echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 ++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 ++if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then ++ # We make a subdir and do the tests there. Otherwise we can end up ++ # making bogus files that we don't know about and never remove. For ++ # instance it was reported that on HP-UX the gcc test will end up ++ # making a dummy file named `D' -- because `-MD' means `put the output ++ # in D'. ++ mkdir conftest.dir ++ # Copy depcomp to subdir because otherwise we won't find it if we're ++ # using a relative directory. ++ cp "$am_depcomp" conftest.dir ++ cd conftest.dir ++ # We will build objects and dependencies in a subdirectory because ++ # it helps to detect inapplicable dependency modes. For instance ++ # both Tru64's cc and ICC support -MD to output dependencies as a ++ # side effect of compilation, but ICC will put the dependencies in ++ # the current directory while Tru64 will put them in the object ++ # directory. ++ mkdir sub ++ ++ am_cv_CXX_dependencies_compiler_type=none ++ if test "$am_compiler_list" = ""; then ++ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` ++ fi ++ for depmode in $am_compiler_list; do ++ # Setup a source with many dependencies, because some compilers ++ # like to wrap large dependency lists on column 80 (with \), and ++ # we should not choose a depcomp mode which is confused by this. ++ # ++ # We need to recreate these files for each test, as the compiler may ++ # overwrite some of them when testing with obscure command lines. ++ # This happens at least with the AIX C compiler. ++ : > sub/conftest.c ++ for i in 1 2 3 4 5 6; do ++ echo '#include "conftst'$i'.h"' >> sub/conftest.c ++ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with ++ # Solaris 8's {/usr,}/bin/sh. ++ touch sub/conftst$i.h ++ done ++ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + ++ case $depmode in ++ nosideeffect) ++ # after this tag, mechanisms are not by side-effect, so they'll ++ # only be used when explicitly requested ++ if test "x$enable_dependency_tracking" = xyes; then ++ continue ++ else ++ break ++ fi ++ ;; ++ none) break ;; ++ esac ++ # We check with `-c' and `-o' for the sake of the "dashmstdout" ++ # mode. It turns out that the SunPro C++ compiler does not properly ++ # handle `-M -o', and we need to detect this. ++ if depmode=$depmode \ ++ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ ++ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ ++ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ ++ >/dev/null 2>conftest.err && ++ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && ++ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then ++ # icc doesn't choke on unknown options, it will just issue warnings ++ # or remarks (even with -Werror). So we grep stderr for any message ++ # that says an option was ignored or not supported. ++ # When given -MP, icc 7.0 and 7.1 complain thusly: ++ # icc: Command line warning: ignoring option '-M'; no argument required ++ # The diagnosis changed in icc 8.0: ++ # icc: Command line remark: option '-MP' not supported ++ if (grep 'ignoring option' conftest.err || ++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else ++ am_cv_CXX_dependencies_compiler_type=$depmode ++ break ++ fi ++ fi ++ done ++ ++ cd .. ++ rm -rf conftest.dir + else +- STRIP=":" ++ am_cv_CXX_dependencies_compiler_type=none + fi ++ + fi ++echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 ++echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6 ++CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type + + +-enable_dlopen=no +-enable_win32_dll=no + +-# Check whether --enable-libtool-lock or --disable-libtool-lock was given. +-if test "${enable_libtool_lock+set}" = set; then +- enableval="$enable_libtool_lock" +- : ++if ++ test "x$enable_dependency_tracking" != xno \ ++ && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then ++ am__fastdepCXX_TRUE= ++ am__fastdepCXX_FALSE='#' ++else ++ am__fastdepCXX_TRUE='#' ++ am__fastdepCXX_FALSE= + fi + +-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes +- +-# Some flags need to be propagated to the compiler or linker for good +-# libtool support. +-case $host in +-*-*-irix6*) +- # Find out which ABI we are using. +- echo '#line 2337 "configure"' > conftest.$ac_ext +- if { (eval echo configure:2338: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +- case `/usr/bin/file conftest.$ac_objext` in +- *32-bit*) +- LD="${LD-ld} -32" +- ;; +- *N32*) +- LD="${LD-ld} -n32" +- ;; +- *64-bit*) +- LD="${LD-ld} -64" +- ;; +- esac +- fi +- rm -rf conftest* +- ;; +- +-*-*-sco3.2v5*) +- # On SCO OpenServer 5, we need -belf to get full-featured binaries. +- SAVE_CFLAGS="$CFLAGS" +- CFLAGS="$CFLAGS -belf" +- echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6 +-echo "configure:2359: checking whether the C compiler needs -belf" >&5 +-if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- +- ac_ext=c +-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +-cross_compiling=$ac_cv_prog_cc_cross + +- cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +- rm -rf conftest* +- lt_cv_cc_needs_belf=yes ++if test -n "$CXX" && ( test "X$CXX" != "Xno" && ++ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || ++ (test "X$CXX" != "Xg++"))) ; then ++ ac_ext=cc ++ac_cpp='$CXXCPP $CPPFLAGS' ++ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_cxx_compiler_gnu ++echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 ++echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6 ++if test -z "$CXXCPP"; then ++ if test "${ac_cv_prog_CXXCPP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- lt_cv_cc_needs_belf=no ++ # Double quotes because CXXCPP needs to be expanded ++ for CXXCPP in "$CXX -E" "/lib/cpp" ++ do ++ ac_preproc_ok=false ++for ac_cxx_preproc_warn_flag in '' yes ++do ++ # Use a header file that comes with gcc, so configuring glibc ++ # with a fresh cross-compiler works. ++ # Prefer to if __STDC__ is defined, since ++ # exists even on freestanding compilers. ++ # On the NeXT, cc -E runs the code through the compiler's parser, ++ # not just through cpp. "Syntax error" is here to catch this case. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ Syntax error ++_ACEOF ++if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 ++ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null; then ++ if test -s conftest.err; then ++ ac_cpp_err=$ac_cxx_preproc_warn_flag ++ ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag ++ else ++ ac_cpp_err= ++ fi ++else ++ ac_cpp_err=yes + fi +-rm -f conftest* +- ac_ext=c +-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +-cross_compiling=$ac_cv_prog_cc_cross ++if test -z "$ac_cpp_err"; then ++ : ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + ++ # Broken: fails on valid input. ++continue + fi ++rm -f conftest.err conftest.$ac_ext + +-echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6 +- if test x"$lt_cv_cc_needs_belf" != x"yes"; then +- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf +- CFLAGS="$SAVE_CFLAGS" ++ # OK, works on sane cases. Now check whether non-existent headers ++ # can be detected and how. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++_ACEOF ++if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 ++ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null; then ++ if test -s conftest.err; then ++ ac_cpp_err=$ac_cxx_preproc_warn_flag ++ ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag ++ else ++ ac_cpp_err= + fi +- ;; +- ++else ++ ac_cpp_err=yes ++fi ++if test -z "$ac_cpp_err"; then ++ # Broken: success on invalid input. ++continue ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-esac ++ # Passes both tests. ++ac_preproc_ok=: ++break ++fi ++rm -f conftest.err conftest.$ac_ext + +-# Sed substitution that helps us do robust quoting. It backslashifies +-# metacharacters that are still active within double-quoted strings. +-Xsed='sed -e s/^X//' +-sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' ++done ++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. ++rm -f conftest.err conftest.$ac_ext ++if $ac_preproc_ok; then ++ break ++fi + +-# Same as above, but do not quote variable references. +-double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' ++ done ++ ac_cv_prog_CXXCPP=$CXXCPP + +-# Sed substitution to delay expansion of an escaped shell variable in a +-# double_quote_subst'ed string. +-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' ++fi ++ CXXCPP=$ac_cv_prog_CXXCPP ++else ++ ac_cv_prog_CXXCPP=$CXXCPP ++fi ++echo "$as_me:$LINENO: result: $CXXCPP" >&5 ++echo "${ECHO_T}$CXXCPP" >&6 ++ac_preproc_ok=false ++for ac_cxx_preproc_warn_flag in '' yes ++do ++ # Use a header file that comes with gcc, so configuring glibc ++ # with a fresh cross-compiler works. ++ # Prefer to if __STDC__ is defined, since ++ # exists even on freestanding compilers. ++ # On the NeXT, cc -E runs the code through the compiler's parser, ++ # not just through cpp. "Syntax error" is here to catch this case. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ Syntax error ++_ACEOF ++if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 ++ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null; then ++ if test -s conftest.err; then ++ ac_cpp_err=$ac_cxx_preproc_warn_flag ++ ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag ++ else ++ ac_cpp_err= ++ fi ++else ++ ac_cpp_err=yes ++fi ++if test -z "$ac_cpp_err"; then ++ : ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-# Constants: +-rm="rm -f" ++ # Broken: fails on valid input. ++continue ++fi ++rm -f conftest.err conftest.$ac_ext + +-# Global variables: +-default_ofile=libtool +-can_build_shared=yes ++ # OK, works on sane cases. Now check whether non-existent headers ++ # can be detected and how. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++_ACEOF ++if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 ++ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null; then ++ if test -s conftest.err; then ++ ac_cpp_err=$ac_cxx_preproc_warn_flag ++ ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag ++ else ++ ac_cpp_err= ++ fi ++else ++ ac_cpp_err=yes ++fi ++if test -z "$ac_cpp_err"; then ++ # Broken: success on invalid input. ++continue ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-# All known linkers require a `.a' archive for static linking (except M$VC, +-# which needs '.lib'). +-libext=a +-ltmain="$ac_aux_dir/ltmain.sh" +-ofile="$default_ofile" +-with_gnu_ld="$lt_cv_prog_gnu_ld" +-need_locks="$enable_libtool_lock" ++ # Passes both tests. ++ac_preproc_ok=: ++break ++fi ++rm -f conftest.err conftest.$ac_ext + +-old_CC="$CC" +-old_CFLAGS="$CFLAGS" ++done ++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. ++rm -f conftest.err conftest.$ac_ext ++if $ac_preproc_ok; then ++ : ++else ++ { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check ++See \`config.log' for more details." >&5 ++echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++fi + +-# Set sane defaults for various variables +-test -z "$AR" && AR=ar +-test -z "$AR_FLAGS" && AR_FLAGS=cru +-test -z "$AS" && AS=as +-test -z "$CC" && CC=cc +-test -z "$DLLTOOL" && DLLTOOL=dlltool +-test -z "$LD" && LD=ld +-test -z "$LN_S" && LN_S="ln -s" +-test -z "$MAGIC_CMD" && MAGIC_CMD=file +-test -z "$NM" && NM=nm +-test -z "$OBJDUMP" && OBJDUMP=objdump +-test -z "$RANLIB" && RANLIB=: +-test -z "$STRIP" && STRIP=: +-test -z "$ac_objext" && ac_objext=o ++ac_ext=cc ++ac_cpp='$CXXCPP $CPPFLAGS' ++ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + +-if test x"$host" != x"$build"; then +- ac_tool_prefix=${host_alias}- +-else +- ac_tool_prefix= + fi + +-# Transform linux* to *-*-linux-gnu*, to support old configure scripts. +-case $host_os in +-linux-gnu*) ;; +-linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` +-esac + +-case $host_os in +-aix3*) +- # AIX sometimes has problems with the GCC collect2 program. For some +- # reason, if we set the COLLECT_NAMES environment variable, the problems +- # vanish in a puff of smoke. +- if test "X${COLLECT_NAMES+set}" != Xset; then +- COLLECT_NAMES= +- export COLLECT_NAMES ++ac_ext=f ++ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' ++ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_f77_compiler_gnu ++if test -n "$ac_tool_prefix"; then ++ for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran ++ do ++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. ++set dummy $ac_tool_prefix$ac_prog; ac_word=$2 ++echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++if test "${ac_cv_prog_F77+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$F77"; then ++ ac_cv_prog_F77="$F77" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_prog_F77="$ac_tool_prefix$ac_prog" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 + fi +- ;; +-esac +- +-# Determine commands to create old-style static archives. +-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' +-old_postinstall_cmds='chmod 644 $oldlib' +-old_postuninstall_cmds= ++done ++done + +-if test -n "$RANLIB"; then +- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +- old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" + fi +- +-# Allow CC to be a program name with arguments. +-set dummy $CC +-compiler="$2" +- +-echo $ac_n "checking for objdir""... $ac_c" 1>&6 +-echo "configure:2492: checking for objdir" >&5 +-rm -f .libs 2>/dev/null +-mkdir .libs 2>/dev/null +-if test -d .libs; then +- objdir=.libs ++fi ++F77=$ac_cv_prog_F77 ++if test -n "$F77"; then ++ echo "$as_me:$LINENO: result: $F77" >&5 ++echo "${ECHO_T}$F77" >&6 + else +- # MS-DOS does not allow filenames that begin with a dot. +- objdir=_libs ++ echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6 + fi +-rmdir .libs 2>/dev/null +-echo "$ac_t""$objdir" 1>&6 + ++ test -n "$F77" && break ++ done ++fi ++if test -z "$F77"; then ++ ac_ct_F77=$F77 ++ for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++if test "${ac_cv_prog_ac_ct_F77+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_F77"; then ++ ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_prog_ac_ct_F77="$ac_prog" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done + +-# Check whether --with-pic or --without-pic was given. +-if test "${with_pic+set}" = set; then +- withval="$with_pic" +- pic_mode="$withval" ++fi ++fi ++ac_ct_F77=$ac_cv_prog_ac_ct_F77 ++if test -n "$ac_ct_F77"; then ++ echo "$as_me:$LINENO: result: $ac_ct_F77" >&5 ++echo "${ECHO_T}$ac_ct_F77" >&6 + else +- pic_mode=default ++ echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6 + fi + +-test -z "$pic_mode" && pic_mode=default +- +-# We assume here that the value for lt_cv_prog_cc_pic will not be cached +-# in isolation, and that seeing it set (from the cache) indicates that +-# the associated values are set (in the cache) correctly too. +-echo $ac_n "checking for $compiler option to produce PIC""... $ac_c" 1>&6 +-echo "configure:2519: checking for $compiler option to produce PIC" >&5 +-if eval "test \"`echo '$''{'lt_cv_prog_cc_pic'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- lt_cv_prog_cc_pic= +- lt_cv_prog_cc_shlib= +- lt_cv_prog_cc_wl= +- lt_cv_prog_cc_static= +- lt_cv_prog_cc_no_builtin= +- lt_cv_prog_cc_can_build_shared=$can_build_shared ++ test -n "$ac_ct_F77" && break ++done + +- if test "$GCC" = yes; then +- lt_cv_prog_cc_wl='-Wl,' +- lt_cv_prog_cc_static='-static' ++ F77=$ac_ct_F77 ++fi + +- case $host_os in +- aix*) +- # Below there is a dirty hack to force normal static linking with -ldl +- # The problem is because libdl dynamically linked with both libc and +- # libC (AIX C++ library), which obviously doesn't included in libraries +- # list by gcc. This cause undefined symbols with -static flags. +- # This hack allows C programs to be linked with "-static -ldl", but +- # we not sure about C++ programs. +- lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC" +- ;; +- amigaos*) +- # FIXME: we need at least 68020 code to build shared libraries, but +- # adding the `-m68020' flag to GCC prevents building anything better, +- # like `-m68040'. +- lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4' +- ;; +- beos* | irix5* | irix6* | osf3* | osf4* | osf5*) +- # PIC is the default for these OSes. +- ;; +- darwin* | rhapsody*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- lt_cv_prog_cc_pic='-fno-common' +- ;; +- cygwin* | mingw* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- lt_cv_prog_cc_pic='-DDLL_EXPORT' +- ;; +- sysv4*MP*) +- if test -d /usr/nec; then +- lt_cv_prog_cc_pic=-Kconform_pic +- fi +- ;; +- *) +- lt_cv_prog_cc_pic='-fPIC' +- ;; +- esac +- else +- # PORTME Check for PIC flags for the system compiler. +- case $host_os in +- aix3* | aix4* | aix5*) +- # All AIX code is PIC. +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- lt_cv_prog_cc_static='-Bstatic' +- lt_cv_prog_cc_wl='-Wl,' +- else +- lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp' +- fi +- ;; + +- hpux9* | hpux10* | hpux11*) +- # Is there a better lt_cv_prog_cc_static that works with the bundled CC? +- lt_cv_prog_cc_wl='-Wl,' +- lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive" +- lt_cv_prog_cc_pic='+Z' +- ;; ++# Provide some information about the compiler. ++echo "$as_me:5248:" \ ++ "checking for Fortran 77 compiler version" >&5 ++ac_compiler=`set X $ac_compile; echo $2` ++{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 ++ (eval $ac_compiler --version &5) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 ++ (eval $ac_compiler -v &5) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 ++ (eval $ac_compiler -V &5) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++rm -f a.out ++ ++# If we don't use `.F' as extension, the preprocessor is not run on the ++# input file. (Note that this only needs to work for GNU compilers.) ++ac_save_ext=$ac_ext ++ac_ext=F ++echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5 ++echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6 ++if test "${ac_cv_f77_compiler_gnu+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++ program main ++#ifndef __GNUC__ ++ choke me ++#endif + +- irix5* | irix6*) +- lt_cv_prog_cc_wl='-Wl,' +- lt_cv_prog_cc_static='-non_shared' +- # PIC (with -KPIC) is the default. +- ;; ++ end ++_ACEOF ++rm -f conftest.$ac_objext ++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest.$ac_objext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_compiler_gnu=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ac_compiler_gnu=no ++fi ++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ac_cv_f77_compiler_gnu=$ac_compiler_gnu ++ ++fi ++echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5 ++echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6 ++ac_ext=$ac_save_ext ++ac_test_FFLAGS=${FFLAGS+set} ++ac_save_FFLAGS=$FFLAGS ++FFLAGS= ++echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5 ++echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6 ++if test "${ac_cv_prog_f77_g+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ FFLAGS=-g ++cat >conftest.$ac_ext <<_ACEOF ++ program main ++ ++ end ++_ACEOF ++rm -f conftest.$ac_objext ++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest.$ac_objext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_cv_prog_f77_g=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ac_cv_prog_f77_g=no ++fi ++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++fi ++echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5 ++echo "${ECHO_T}$ac_cv_prog_f77_g" >&6 ++if test "$ac_test_FFLAGS" = set; then ++ FFLAGS=$ac_save_FFLAGS ++elif test $ac_cv_prog_f77_g = yes; then ++ if test "x$ac_cv_f77_compiler_gnu" = xyes; then ++ FFLAGS="-g -O2" ++ else ++ FFLAGS="-g" ++ fi ++else ++ if test "x$ac_cv_f77_compiler_gnu" = xyes; then ++ FFLAGS="-O2" ++ else ++ FFLAGS= ++ fi ++fi + +- cygwin* | mingw* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- lt_cv_prog_cc_pic='-DDLL_EXPORT' +- ;; ++G77=`test $ac_compiler_gnu = yes && echo yes` ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu + +- newsos6) +- lt_cv_prog_cc_pic='-KPIC' +- lt_cv_prog_cc_static='-Bstatic' +- ;; + +- osf3* | osf4* | osf5*) +- # All OSF/1 code is PIC. +- lt_cv_prog_cc_wl='-Wl,' +- lt_cv_prog_cc_static='-non_shared' +- ;; + +- sco3.2v5*) +- lt_cv_prog_cc_pic='-Kpic' +- lt_cv_prog_cc_static='-dn' +- lt_cv_prog_cc_shlib='-belf' +- ;; ++# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! ++ ++# find the maximum length of command line arguments ++echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 ++echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6 ++if test "${lt_cv_sys_max_cmd_len+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ i=0 ++ teststring="ABCD" ++ ++ case $build_os in ++ msdosdjgpp*) ++ # On DJGPP, this test can blow up pretty badly due to problems in libc ++ # (any single argument exceeding 2000 bytes causes a buffer overrun ++ # during glob expansion). Even if it were fixed, the result of this ++ # check would be larger than it should be. ++ lt_cv_sys_max_cmd_len=12288; # 12K is about right ++ ;; + +- solaris*) +- lt_cv_prog_cc_pic='-KPIC' +- lt_cv_prog_cc_static='-Bstatic' +- lt_cv_prog_cc_wl='-Wl,' +- ;; ++ gnu*) ++ # Under GNU Hurd, this test is not required because there is ++ # no limit to the length of command line arguments. ++ # Libtool will interpret -1 as no limit whatsoever ++ lt_cv_sys_max_cmd_len=-1; ++ ;; + +- sunos4*) +- lt_cv_prog_cc_pic='-PIC' +- lt_cv_prog_cc_static='-Bstatic' +- lt_cv_prog_cc_wl='-Qoption ld ' +- ;; ++ cygwin* | mingw*) ++ # On Win9x/ME, this test blows up -- it succeeds, but takes ++ # about 5 minutes as the teststring grows exponentially. ++ # Worse, since 9x/ME are not pre-emptively multitasking, ++ # you end up with a "frozen" computer, even though with patience ++ # the test eventually succeeds (with a max line length of 256k). ++ # Instead, let's just punt: use the minimum linelength reported by ++ # all of the supported platforms: 8192 (on NT/2K/XP). ++ lt_cv_sys_max_cmd_len=8192; ++ ;; + +- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) +- lt_cv_prog_cc_pic='-KPIC' +- lt_cv_prog_cc_static='-Bstatic' +- if test "x$host_vendor" = xsni; then +- lt_cv_prog_cc_wl='-LD' +- else +- lt_cv_prog_cc_wl='-Wl,' +- fi +- ;; ++ amigaos*) ++ # On AmigaOS with pdksh, this test takes hours, literally. ++ # So we just punt and use a minimum line length of 8192. ++ lt_cv_sys_max_cmd_len=8192; ++ ;; + +- uts4*) +- lt_cv_prog_cc_pic='-pic' +- lt_cv_prog_cc_static='-Bstatic' +- ;; ++ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) ++ # This has been around since 386BSD, at least. Likely further. ++ if test -x /sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` ++ elif test -x /usr/sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` ++ else ++ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs ++ fi ++ # And add a safety zone ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ ;; + +- sysv4*MP*) +- if test -d /usr/nec ;then +- lt_cv_prog_cc_pic='-Kconform_pic' +- lt_cv_prog_cc_static='-Bstatic' +- fi +- ;; ++ interix*) ++ # We know the value 262144 and hardcode it with a safety zone (like BSD) ++ lt_cv_sys_max_cmd_len=196608 ++ ;; + +- *) +- lt_cv_prog_cc_can_build_shared=no +- ;; +- esac +- fi ++ osf*) ++ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure ++ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not ++ # nice to cause kernel panics so lets avoid the loop below. ++ # First set a reasonable default. ++ lt_cv_sys_max_cmd_len=16384 ++ # ++ if test -x /sbin/sysconfig; then ++ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in ++ *1*) lt_cv_sys_max_cmd_len=-1 ;; ++ esac ++ fi ++ ;; ++ sco3.2v5*) ++ lt_cv_sys_max_cmd_len=102400 ++ ;; ++ sysv5* | sco5v6* | sysv4.2uw2*) ++ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` ++ if test -n "$kargmax"; then ++ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` ++ else ++ lt_cv_sys_max_cmd_len=32768 ++ fi ++ ;; ++ *) ++ # If test is not a shell built-in, we'll probably end up computing a ++ # maximum length that is only half of the actual maximum length, but ++ # we can't tell. ++ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} ++ while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \ ++ = "XX$teststring") >/dev/null 2>&1 && ++ new_result=`expr "X$teststring" : ".*" 2>&1` && ++ lt_cv_sys_max_cmd_len=$new_result && ++ test $i != 17 # 1/2 MB should be enough ++ do ++ i=`expr $i + 1` ++ teststring=$teststring$teststring ++ done ++ teststring= ++ # Add a significant safety factor because C++ compilers can tack on massive ++ # amounts of additional arguments before passing them to the linker. ++ # It appears as though 1/2 is a usable value. ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` ++ ;; ++ esac + + fi + +-if test -z "$lt_cv_prog_cc_pic"; then +- echo "$ac_t""none" 1>&6 ++if test -n $lt_cv_sys_max_cmd_len ; then ++ echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 ++echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6 + else +- echo "$ac_t""$lt_cv_prog_cc_pic" 1>&6 ++ echo "$as_me:$LINENO: result: none" >&5 ++echo "${ECHO_T}none" >&6 ++fi + +- # Check to make sure the pic_flag actually works. +- echo $ac_n "checking if $compiler PIC flag $lt_cv_prog_cc_pic works""... $ac_c" 1>&6 +-echo "configure:2671: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5 +- if eval "test \"`echo '$''{'lt_cv_prog_cc_pic_works'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- save_CFLAGS="$CFLAGS" +- CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC" +- cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +- rm -rf conftest* +- case $host_os in +- hpux9* | hpux10* | hpux11*) +- # On HP-UX, both CC and GCC only warn that PIC is supported... then +- # they create non-PIC objects. So, if there were any warnings, we +- # assume that PIC is not supported. +- if test -s conftest.err; then +- lt_cv_prog_cc_pic_works=no +- else +- lt_cv_prog_cc_pic_works=yes +- fi +- ;; +- *) +- lt_cv_prog_cc_pic_works=yes +- ;; +- esac +- ++ ++# Check for command to grab the raw symbol name followed by C symbol from nm. ++echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 ++echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6 ++if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- lt_cv_prog_cc_pic_works=no +- +-fi +-rm -f conftest* +- CFLAGS="$save_CFLAGS" +- +-fi + ++# These are sane defaults that work on at least a few old systems. ++# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +- if test "X$lt_cv_prog_cc_pic_works" = Xno; then +- lt_cv_prog_cc_pic= +- lt_cv_prog_cc_can_build_shared=no +- else +- lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic" +- fi ++# Character class describing NM global symbol codes. ++symcode='[BCDEGRST]' + +- echo "$ac_t""$lt_cv_prog_cc_pic_works" 1>&6 +-fi ++# Regexp to match symbols that can be accessed directly from C. ++sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +-# Check for any special shared library compilation flags. +-if test -n "$lt_cv_prog_cc_shlib"; then +- echo "configure: warning: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" 1>&2 +- if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$lt_cv_prog_cc_shlib[ ]" >/dev/null; then : +- else +- echo "configure: warning: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" 1>&2 +- lt_cv_prog_cc_can_build_shared=no ++# Transform an extracted symbol line into a proper C declaration ++lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" ++ ++# Transform an extracted symbol line into symbol name and symbol address ++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ++ ++# Define system-specific variables. ++case $host_os in ++aix*) ++ symcode='[BCDT]' ++ ;; ++cygwin* | mingw* | pw32*) ++ symcode='[ABCDGISTW]' ++ ;; ++hpux*) # Its linker distinguishes data from code symbols ++ if test "$host_cpu" = ia64; then ++ symcode='[ABCDEGRST]' + fi +-fi ++ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" ++ lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ++ ;; ++linux* | k*bsd*-gnu) ++ if test "$host_cpu" = ia64; then ++ symcode='[ABCDGIRSTW]' ++ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" ++ lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ++ fi ++ ;; ++irix* | nonstopux*) ++ symcode='[BCDEGRST]' ++ ;; ++osf*) ++ symcode='[BCDEGQRST]' ++ ;; ++solaris*) ++ symcode='[BDRT]' ++ ;; ++sco3.2v5*) ++ symcode='[DT]' ++ ;; ++sysv4.2uw2*) ++ symcode='[DT]' ++ ;; ++sysv5* | sco5v6* | unixware* | OpenUNIX*) ++ symcode='[ABDT]' ++ ;; ++sysv4) ++ symcode='[DFNSTU]' ++ ;; ++esac + +-echo $ac_n "checking if $compiler static flag $lt_cv_prog_cc_static works""... $ac_c" 1>&6 +-echo "configure:2737: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5 +-if eval "test \"`echo '$''{'lt_cv_prog_cc_static_works'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- lt_cv_prog_cc_static_works=no +- save_LDFLAGS="$LDFLAGS" +- LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static" +- cat > conftest.$ac_ext <&1` in ++*GNU* | *'with BFD'*) ++ symcode='[ABCDGIRSTW]' ;; ++esac + +-; return 0; } +-EOF +-if { (eval echo configure:2752: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +- rm -rf conftest* +- lt_cv_prog_cc_static_works=yes +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +-fi +-rm -f conftest* +- LDFLAGS="$save_LDFLAGS" ++# Try without a prefix undercore, then with it. ++for ac_symprfx in "" "_"; do + +-fi ++ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. ++ symxfrm="\\1 $ac_symprfx\\2 \\2" ++ ++ # Write the raw and C identifiers. ++ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + ++ # Check to see that the pipe works correctly. ++ pipe_works=no + +-# Belt *and* braces to stop my trousers falling down: +-test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static= +-echo "$ac_t""$lt_cv_prog_cc_static_works" 1>&6 +- +-pic_flag="$lt_cv_prog_cc_pic" +-special_shlib_compile_flags="$lt_cv_prog_cc_shlib" +-wl="$lt_cv_prog_cc_wl" +-link_static_flag="$lt_cv_prog_cc_static" +-no_builtin_flag="$lt_cv_prog_cc_no_builtin" +-can_build_shared="$lt_cv_prog_cc_can_build_shared" +- +- +-# Check to see if options -o and -c are simultaneously supported by compiler +-echo $ac_n "checking if $compiler supports -c -o file.$ac_objext""... $ac_c" 1>&6 +-echo "configure:2779: checking if $compiler supports -c -o file.$ac_objext" >&5 +-if eval "test \"`echo '$''{'lt_cv_compiler_c_o'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- +-$rm -r conftest 2>/dev/null +-mkdir conftest +-cd conftest +-echo "int some_variable = 0;" > conftest.$ac_ext +-mkdir out +-# According to Tom Tromey, Ian Lance Taylor reported there are C compilers +-# that will create temporary files in the current directory regardless of +-# the output directory. Thus, making CWD read-only will cause this test +-# to fail, enabling locking or at least warning the user not to do parallel +-# builds. +-chmod -w . +-save_CFLAGS="$CFLAGS" +-CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" +-compiler_c_o=no +-if { (eval echo configure:2798: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test -s out/conftest.err; then +- lt_cv_compiler_c_o=no +- else +- lt_cv_compiler_c_o=yes +- fi +-else +- # Append any errors to the config.log. +- cat out/conftest.err 1>&5 +- lt_cv_compiler_c_o=no +-fi +-CFLAGS="$save_CFLAGS" +-chmod u+w . +-$rm conftest* out/* +-rmdir out +-cd .. +-rmdir conftest +-$rm -r conftest 2>/dev/null +- +-fi +- +-compiler_c_o=$lt_cv_compiler_c_o +-echo "$ac_t""$compiler_c_o" 1>&6 +- +-if test x"$compiler_c_o" = x"yes"; then +- # Check to see if we can write to a .lo +- echo $ac_n "checking if $compiler supports -c -o file.lo""... $ac_c" 1>&6 +-echo "configure:2827: checking if $compiler supports -c -o file.lo" >&5 +- if eval "test \"`echo '$''{'lt_cv_compiler_o_lo'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- +- lt_cv_compiler_o_lo=no +- save_CFLAGS="$CFLAGS" +- CFLAGS="$CFLAGS -c -o conftest.lo" ++ rm -f conftest* + cat > conftest.$ac_ext <&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ # Now try to grab the symbols. ++ nlist=conftest.nm ++ if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 ++ (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && test -s "$nlist"; then ++ # Try sorting and uniquifying the output. ++ if sort "$nlist" | uniq > "$nlist"T; then ++ mv -f "$nlist"T "$nlist" ++ else ++ rm -f "$nlist"T ++ fi ++ ++ # Make sure that we snagged all the symbols we need. ++ if grep ' nm_test_var$' "$nlist" >/dev/null; then ++ if grep ' nm_test_func$' "$nlist" >/dev/null; then ++ cat < conftest.$ac_ext ++#ifdef __cplusplus ++extern "C" { ++#endif + +-int main() { +-int some_variable = 0; +-; return 0; } + EOF +-if { (eval echo configure:2843: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +- rm -rf conftest* +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test -s conftest.err; then +- lt_cv_compiler_o_lo=no ++ # Now generate the symbol file. ++ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' ++ ++ cat <> conftest.$ac_ext ++#if defined (__STDC__) && __STDC__ ++# define lt_ptr_t void * ++#else ++# define lt_ptr_t char * ++# define const ++#endif ++ ++/* The mapping between symbol names and symbols. */ ++const struct { ++ const char *name; ++ lt_ptr_t address; ++} ++lt_preloaded_symbols[] = ++{ ++EOF ++ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext ++ cat <<\EOF >> conftest.$ac_ext ++ {0, (lt_ptr_t) 0} ++}; ++ ++#ifdef __cplusplus ++} ++#endif ++EOF ++ # Now try linking the two files. ++ mv conftest.$ac_objext conftstm.$ac_objext ++ lt_save_LIBS="$LIBS" ++ lt_save_CFLAGS="$CFLAGS" ++ LIBS="conftstm.$ac_objext" ++ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" ++ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && test -s conftest${ac_exeext}; then ++ pipe_works=yes ++ fi ++ LIBS="$lt_save_LIBS" ++ CFLAGS="$lt_save_CFLAGS" ++ else ++ echo "cannot find nm_test_func in $nlist" >&5 ++ fi ++ else ++ echo "cannot find nm_test_var in $nlist" >&5 ++ fi + else +- lt_cv_compiler_o_lo=yes ++ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 + fi +- +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +-fi +-rm -f conftest* +- CFLAGS="$save_CFLAGS" +- +-fi ++ else ++ echo "$progname: failed program was:" >&5 ++ cat conftest.$ac_ext >&5 ++ fi ++ rm -f conftest* conftst* ++ ++ # Do not use the global_symbol_pipe unless it works. ++ if test "$pipe_works" = yes; then ++ break ++ else ++ lt_cv_sys_global_symbol_pipe= ++ fi ++done + +- compiler_o_lo=$lt_cv_compiler_o_lo +- echo "$ac_t""$compiler_o_lo" 1>&6 +-else +- compiler_o_lo=no + fi + +-# Check to see if we can do hard links to lock some files if needed +-hard_links="nottested" +-if test "$compiler_c_o" = no && test "$need_locks" != no; then +- # do not overwrite the value of need_locks provided by the user +- echo $ac_n "checking if we can lock with hard links""... $ac_c" 1>&6 +-echo "configure:2873: checking if we can lock with hard links" >&5 +- hard_links=yes +- $rm conftest* +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- touch conftest.a +- ln conftest.a conftest.b 2>&5 || hard_links=no +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- echo "$ac_t""$hard_links" 1>&6 +- if test "$hard_links" = no; then +- echo "configure: warning: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" 1>&2 +- need_locks=warn +- fi ++if test -z "$lt_cv_sys_global_symbol_pipe"; then ++ lt_cv_sys_global_symbol_to_cdecl= ++fi ++if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then ++ echo "$as_me:$LINENO: result: failed" >&5 ++echo "${ECHO_T}failed" >&6 + else +- need_locks=no ++ echo "$as_me:$LINENO: result: ok" >&5 ++echo "${ECHO_T}ok" >&6 + fi + +-if test "$GCC" = yes; then +- # Check to see if options -fno-rtti -fno-exceptions are supported by compiler +- echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions""... $ac_c" 1>&6 +-echo "configure:2892: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +- echo "int some_variable = 0;" > conftest.$ac_ext +- save_CFLAGS="$CFLAGS" +- CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext" +- compiler_rtti_exceptions=no +- cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +- rm -rf conftest* +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test -s conftest.err; then +- compiler_rtti_exceptions=no +- else +- compiler_rtti_exceptions=yes +- fi +- ++echo "$as_me:$LINENO: checking for objdir" >&5 ++echo $ECHO_N "checking for objdir... $ECHO_C" >&6 ++if test "${lt_cv_objdir+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ rm -f .libs 2>/dev/null ++mkdir .libs 2>/dev/null ++if test -d .libs; then ++ lt_cv_objdir=.libs + else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 ++ # MS-DOS does not allow filenames that begin with a dot. ++ lt_cv_objdir=_libs + fi +-rm -f conftest* +- CFLAGS="$save_CFLAGS" +- echo "$ac_t""$compiler_rtti_exceptions" 1>&6 +- +- if test "$compiler_rtti_exceptions" = "yes"; then +- no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' +- else +- no_builtin_flag=' -fno-builtin' +- fi ++rmdir .libs 2>/dev/null + fi ++echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 ++echo "${ECHO_T}$lt_cv_objdir" >&6 ++objdir=$lt_cv_objdir ++ ++ + +-# See if the linker supports building shared libraries. +-echo $ac_n "checking whether the linker ($LD) supports shared libraries""... $ac_c" 1>&6 +-echo "configure:2932: checking whether the linker ($LD) supports shared libraries" >&5 + +-allow_undefined_flag= +-no_undefined_flag= +-need_lib_prefix=unknown +-need_version=unknown +-# when you set need_version to no, make sure it does not cause -set_version +-# flags to be left without arguments +-archive_cmds= +-archive_expsym_cmds= +-old_archive_from_new_cmds= +-old_archive_from_expsyms_cmds= +-export_dynamic_flag_spec= +-whole_archive_flag_spec= +-thread_safe_flag_spec= +-hardcode_into_libs=no +-hardcode_libdir_flag_spec= +-hardcode_libdir_separator= +-hardcode_direct=no +-hardcode_minus_L=no +-hardcode_shlibpath_var=unsupported +-runpath_var= +-link_all_deplibs=unknown +-always_export_symbols=no +-export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' +-# include_expsyms should be a list of space-separated symbols to be *always* +-# included in the symbol list +-include_expsyms= +-# exclude_expsyms can be an egrep regular expression of symbols to exclude +-# it will be wrapped by ` (' and `)$', so one must not match beginning or +-# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', +-# as well as any symbol that contains `d'. +-exclude_expsyms="_GLOBAL_OFFSET_TABLE_" +-# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out +-# platforms (ab)use it in PIC code, but their linkers get confused if +-# the symbol is explicitly referenced. Since portable code cannot +-# rely on this symbol name, it's probably fine to never include it in +-# preloaded symbol tables. +-extract_expsyms_cmds= + + case $host_os in +-cygwin* | mingw* | pw32* ) +- # FIXME: the MSVC++ port hasn't been tested in a loooong time +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- if test "$GCC" != yes; then +- with_gnu_ld=no ++aix3*) ++ # AIX sometimes has problems with the GCC collect2 program. For some ++ # reason, if we set the COLLECT_NAMES environment variable, the problems ++ # vanish in a puff of smoke. ++ if test "X${COLLECT_NAMES+set}" != Xset; then ++ COLLECT_NAMES= ++ export COLLECT_NAMES + fi + ;; +- + esac + +-ld_shlibs=yes +-if test "$with_gnu_ld" = yes; then +- # If archive_cmds runs LD, not CC, wlarc should be empty +- wlarc='${wl}' ++# Sed substitution that helps us do robust quoting. It backslashifies ++# metacharacters that are still active within double-quoted strings. ++Xsed='sed -e 1s/^X//' ++sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' + +- # See if GNU ld supports shared libraries. +- case $host_os in +- aix3* | aix4* | aix5*) +- # On AIX, the GNU linker is very broken +- # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available. +- ld_shlibs=no +- cat <&2 ++# Same as above, but do not quote variable references. ++double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' + +-*** Warning: the GNU linker, at least up to release 2.9.1, is reported +-*** to be unable to reliably create shared libraries on AIX. +-*** Therefore, libtool is disabling shared libraries support. If you +-*** really care for shared libraries, you may want to modify your PATH +-*** so that a non-GNU linker is found, and then restart. ++# Sed substitution to delay expansion of an escaped shell variable in a ++# double_quote_subst'ed string. ++delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +-EOF +- ;; ++# Sed substitution to avoid accidental globbing in evaled expressions ++no_glob_subst='s/\*/\\\*/g' + +- amigaos*) +- archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_minus_L=yes +- +- # Samuel A. Falvo II reports +- # that the semantics of dynamic libraries on AmigaOS, at least up +- # to version 4, is to share data among multiple programs linked +- # with the same dynamic library. Since this doesn't match the +- # behavior of shared libraries on other platforms, we can use +- # them. +- ld_shlibs=no +- ;; ++# Constants: ++rm="rm -f" + +- beos*) +- if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then +- allow_undefined_flag=unsupported +- # Joseph Beckenbach says some releases of gcc +- # support --undefined. This deserves some investigation. FIXME +- archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- else +- ld_shlibs=no +- fi +- ;; ++# Global variables: ++default_ofile=libtool ++can_build_shared=yes ++ ++# All known linkers require a `.a' archive for static linking (except MSVC, ++# which needs '.lib'). ++libext=a ++ltmain="$ac_aux_dir/ltmain.sh" ++ofile="$default_ofile" ++with_gnu_ld="$lt_cv_prog_gnu_ld" ++ ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. ++set dummy ${ac_tool_prefix}ar; ac_word=$2 ++echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++if test "${ac_cv_prog_AR+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$AR"; then ++ ac_cv_prog_AR="$AR" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_prog_AR="${ac_tool_prefix}ar" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++ ++fi ++fi ++AR=$ac_cv_prog_AR ++if test -n "$AR"; then ++ echo "$as_me:$LINENO: result: $AR" >&5 ++echo "${ECHO_T}$AR" >&6 ++else ++ echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6 ++fi ++ ++fi ++if test -z "$ac_cv_prog_AR"; then ++ ac_ct_AR=$AR ++ # Extract the first word of "ar", so it can be a program name with args. ++set dummy ar; ac_word=$2 ++echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++if test "${ac_cv_prog_ac_ct_AR+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_AR"; then ++ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_prog_ac_ct_AR="ar" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++ ++ test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="false" ++fi ++fi ++ac_ct_AR=$ac_cv_prog_ac_ct_AR ++if test -n "$ac_ct_AR"; then ++ echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 ++echo "${ECHO_T}$ac_ct_AR" >&6 ++else ++ echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6 ++fi ++ ++ AR=$ac_ct_AR ++else ++ AR="$ac_cv_prog_AR" ++fi ++ ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. ++set dummy ${ac_tool_prefix}ranlib; ac_word=$2 ++echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++if test "${ac_cv_prog_RANLIB+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$RANLIB"; then ++ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++ ++fi ++fi ++RANLIB=$ac_cv_prog_RANLIB ++if test -n "$RANLIB"; then ++ echo "$as_me:$LINENO: result: $RANLIB" >&5 ++echo "${ECHO_T}$RANLIB" >&6 ++else ++ echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6 ++fi ++ ++fi ++if test -z "$ac_cv_prog_RANLIB"; then ++ ac_ct_RANLIB=$RANLIB ++ # Extract the first word of "ranlib", so it can be a program name with args. ++set dummy ranlib; ac_word=$2 ++echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_RANLIB"; then ++ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_prog_ac_ct_RANLIB="ranlib" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++ ++ test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" ++fi ++fi ++ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB ++if test -n "$ac_ct_RANLIB"; then ++ echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 ++echo "${ECHO_T}$ac_ct_RANLIB" >&6 ++else ++ echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6 ++fi ++ ++ RANLIB=$ac_ct_RANLIB ++else ++ RANLIB="$ac_cv_prog_RANLIB" ++fi ++ ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. ++set dummy ${ac_tool_prefix}strip; ac_word=$2 ++echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++if test "${ac_cv_prog_STRIP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$STRIP"; then ++ ac_cv_prog_STRIP="$STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_prog_STRIP="${ac_tool_prefix}strip" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++ ++fi ++fi ++STRIP=$ac_cv_prog_STRIP ++if test -n "$STRIP"; then ++ echo "$as_me:$LINENO: result: $STRIP" >&5 ++echo "${ECHO_T}$STRIP" >&6 ++else ++ echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6 ++fi ++ ++fi ++if test -z "$ac_cv_prog_STRIP"; then ++ ac_ct_STRIP=$STRIP ++ # Extract the first word of "strip", so it can be a program name with args. ++set dummy strip; ac_word=$2 ++echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_STRIP"; then ++ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_prog_ac_ct_STRIP="strip" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++ ++ test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" ++fi ++fi ++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP ++if test -n "$ac_ct_STRIP"; then ++ echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 ++echo "${ECHO_T}$ac_ct_STRIP" >&6 ++else ++ echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6 ++fi ++ ++ STRIP=$ac_ct_STRIP ++else ++ STRIP="$ac_cv_prog_STRIP" ++fi ++ ++ ++old_CC="$CC" ++old_CFLAGS="$CFLAGS" ++ ++# Set sane defaults for various variables ++test -z "$AR" && AR=ar ++test -z "$AR_FLAGS" && AR_FLAGS=cru ++test -z "$AS" && AS=as ++test -z "$CC" && CC=cc ++test -z "$LTCC" && LTCC=$CC ++test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS ++test -z "$DLLTOOL" && DLLTOOL=dlltool ++test -z "$LD" && LD=ld ++test -z "$LN_S" && LN_S="ln -s" ++test -z "$MAGIC_CMD" && MAGIC_CMD=file ++test -z "$NM" && NM=nm ++test -z "$SED" && SED=sed ++test -z "$OBJDUMP" && OBJDUMP=objdump ++test -z "$RANLIB" && RANLIB=: ++test -z "$STRIP" && STRIP=: ++test -z "$ac_objext" && ac_objext=o ++ ++# Determine commands to create old-style static archives. ++old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' ++old_postinstall_cmds='chmod 644 $oldlib' ++old_postuninstall_cmds= ++ ++if test -n "$RANLIB"; then ++ case $host_os in ++ openbsd*) ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" ++ ;; ++ *) ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" ++ ;; ++ esac ++ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" ++fi ++ ++for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++ ++ ++# Only perform the check for file, if the check method requires it ++case $deplibs_check_method in ++file_magic*) ++ if test "$file_magic_cmd" = '$MAGIC_CMD'; then ++ echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 ++echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6 ++if test "${lt_cv_path_MAGIC_CMD+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $MAGIC_CMD in ++[\\/*] | ?:[\\/]*) ++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ++ ;; ++*) ++ lt_save_MAGIC_CMD="$MAGIC_CMD" ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" ++ for ac_dir in $ac_dummy; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/${ac_tool_prefix}file; then ++ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" ++ if test -n "$file_magic_test_file"; then ++ case $deplibs_check_method in ++ "file_magic "*) ++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` ++ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | ++ $EGREP "$file_magic_regex" > /dev/null; then ++ : ++ else ++ cat <&2 ++ ++*** Warning: the command libtool uses to detect shared libraries, ++*** $file_magic_cmd, produces output that libtool cannot recognize. ++*** The result is that libtool may fail to recognize shared libraries ++*** as such. This will affect the creation of libtool libraries that ++*** depend on shared libraries, but programs linked with such libtool ++*** libraries will work regardless of this problem. Nevertheless, you ++*** may want to report the problem to your system manager and/or to ++*** bug-libtool@gnu.org ++ ++EOF ++ fi ;; ++ esac ++ fi ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" ++ MAGIC_CMD="$lt_save_MAGIC_CMD" ++ ;; ++esac ++fi ++ ++MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++if test -n "$MAGIC_CMD"; then ++ echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 ++echo "${ECHO_T}$MAGIC_CMD" >&6 ++else ++ echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6 ++fi ++ ++if test -z "$lt_cv_path_MAGIC_CMD"; then ++ if test -n "$ac_tool_prefix"; then ++ echo "$as_me:$LINENO: checking for file" >&5 ++echo $ECHO_N "checking for file... $ECHO_C" >&6 ++if test "${lt_cv_path_MAGIC_CMD+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $MAGIC_CMD in ++[\\/*] | ?:[\\/]*) ++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ++ ;; ++*) ++ lt_save_MAGIC_CMD="$MAGIC_CMD" ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" ++ for ac_dir in $ac_dummy; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/file; then ++ lt_cv_path_MAGIC_CMD="$ac_dir/file" ++ if test -n "$file_magic_test_file"; then ++ case $deplibs_check_method in ++ "file_magic "*) ++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` ++ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | ++ $EGREP "$file_magic_regex" > /dev/null; then ++ : ++ else ++ cat <&2 ++ ++*** Warning: the command libtool uses to detect shared libraries, ++*** $file_magic_cmd, produces output that libtool cannot recognize. ++*** The result is that libtool may fail to recognize shared libraries ++*** as such. This will affect the creation of libtool libraries that ++*** depend on shared libraries, but programs linked with such libtool ++*** libraries will work regardless of this problem. Nevertheless, you ++*** may want to report the problem to your system manager and/or to ++*** bug-libtool@gnu.org ++ ++EOF ++ fi ;; ++ esac ++ fi ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" ++ MAGIC_CMD="$lt_save_MAGIC_CMD" ++ ;; ++esac ++fi ++ ++MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++if test -n "$MAGIC_CMD"; then ++ echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 ++echo "${ECHO_T}$MAGIC_CMD" >&6 ++else ++ echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6 ++fi ++ ++ else ++ MAGIC_CMD=: ++ fi ++fi ++ ++ fi ++ ;; ++esac ++ ++enable_dlopen=no ++enable_win32_dll=no ++ ++# Check whether --enable-libtool-lock or --disable-libtool-lock was given. ++if test "${enable_libtool_lock+set}" = set; then ++ enableval="$enable_libtool_lock" ++ ++fi; ++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes ++ ++ ++# Check whether --with-pic or --without-pic was given. ++if test "${with_pic+set}" = set; then ++ withval="$with_pic" ++ pic_mode="$withval" ++else ++ pic_mode=default ++fi; ++test -z "$pic_mode" && pic_mode=default ++ ++# Use C for the default configuration in the libtool script ++tagname= ++lt_save_CC="$CC" ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++ ++# Source file extension for C test sources. ++ac_ext=c ++ ++# Object file extension for compiled C test sources. ++objext=o ++objext=$objext ++ ++# Code to be used in simple compile tests ++lt_simple_compile_test_code="int some_variable = 0;\n" ++ ++# Code to be used in simple link tests ++lt_simple_link_test_code='int main(){return(0);}\n' ++ ++ ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} ++ ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++ ++# Allow CC to be a program name with arguments. ++compiler=$CC ++ ++ ++# save warnings/boilerplate of simple test code ++ac_outfile=conftest.$ac_objext ++printf "$lt_simple_compile_test_code" >conftest.$ac_ext ++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_compiler_boilerplate=`cat conftest.err` ++$rm conftest* ++ ++ac_outfile=conftest.$ac_objext ++printf "$lt_simple_link_test_code" >conftest.$ac_ext ++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_linker_boilerplate=`cat conftest.err` ++$rm conftest* ++ ++ ++ ++lt_prog_compiler_no_builtin_flag= ++ ++if test "$GCC" = yes; then ++ lt_prog_compiler_no_builtin_flag=' -fno-builtin' ++ ++ ++echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 ++echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 ++if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_rtti_exceptions=no ++ ac_outfile=conftest.$ac_objext ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="-fno-rtti -fno-exceptions" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:6309: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&5 ++ echo "$as_me:6313: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_rtti_exceptions=yes ++ fi ++ fi ++ $rm conftest* ++ ++fi ++echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6 ++ ++if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then ++ lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" ++else ++ : ++fi ++ ++fi ++ ++lt_prog_compiler_wl= ++lt_prog_compiler_pic= ++lt_prog_compiler_static= ++ ++echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 ++ ++ if test "$GCC" = yes; then ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_static='-static' ++ ++ case $host_os in ++ aix*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ lt_prog_compiler_static='-Bstatic' ++ fi ++ ;; ++ ++ amigaos*) ++ # FIXME: we need at least 68020 code to build shared libraries, but ++ # adding the `-m68020' flag to GCC prevents building anything better, ++ # like `-m68040'. ++ lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' ++ ;; ++ ++ beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ # PIC is the default for these OSes. ++ ;; ++ ++ mingw* | pw32* | os2*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ lt_prog_compiler_pic='-DDLL_EXPORT' ++ ;; ++ ++ darwin* | rhapsody*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ lt_prog_compiler_pic='-fno-common' ++ ;; ++ ++ interix3*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; ++ ++ msdosdjgpp*) ++ # Just because we use GCC doesn't mean we suddenly get shared libraries ++ # on systems that don't support them. ++ lt_prog_compiler_can_build_shared=no ++ enable_shared=no ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ lt_prog_compiler_pic=-Kconform_pic ++ fi ++ ;; ++ ++ hpux*) ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ lt_prog_compiler_pic='-fPIC' ++ ;; ++ esac ++ ;; ++ ++ *) ++ lt_prog_compiler_pic='-fPIC' ++ ;; ++ esac ++ else ++ # PORTME Check for flag to pass linker flags through the system compiler. ++ case $host_os in ++ aix*) ++ lt_prog_compiler_wl='-Wl,' ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ lt_prog_compiler_static='-Bstatic' ++ else ++ lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' ++ fi ++ ;; ++ darwin*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ case $cc_basename in ++ xlc*) ++ lt_prog_compiler_pic='-qnocommon' ++ lt_prog_compiler_wl='-Wl,' ++ ;; ++ esac ++ ;; ++ ++ mingw* | pw32* | os2*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ lt_prog_compiler_pic='-DDLL_EXPORT' ++ ;; ++ ++ hpux9* | hpux10* | hpux11*) ++ lt_prog_compiler_wl='-Wl,' ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ lt_prog_compiler_pic='+Z' ++ ;; ++ esac ++ # Is there a better lt_prog_compiler_static that works with the bundled CC? ++ lt_prog_compiler_static='${wl}-a ${wl}archive' ++ ;; ++ ++ irix5* | irix6* | nonstopux*) ++ lt_prog_compiler_wl='-Wl,' ++ # PIC (with -KPIC) is the default. ++ lt_prog_compiler_static='-non_shared' ++ ;; ++ ++ newsos6) ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ++ linux* | k*bsd*-gnu) ++ case $cc_basename in ++ icc* | ecc*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-static' ++ ;; ++ pgcc* | pgf77* | pgf90* | pgf95*) ++ # Portland Group compilers (*not* the Pentium gcc compiler, ++ # which looks to be a dead project) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-fpic' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ccc*) ++ lt_prog_compiler_wl='-Wl,' ++ # All Alpha code is PIC. ++ lt_prog_compiler_static='-non_shared' ++ ;; ++ esac ++ ;; ++ ++ osf3* | osf4* | osf5*) ++ lt_prog_compiler_wl='-Wl,' ++ # All OSF/1 code is PIC. ++ lt_prog_compiler_static='-non_shared' ++ ;; ++ ++ solaris*) ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ case $cc_basename in ++ f77* | f90* | f95*) ++ lt_prog_compiler_wl='-Qoption ld ';; ++ *) ++ lt_prog_compiler_wl='-Wl,';; ++ esac ++ ;; ++ ++ sunos4*) ++ lt_prog_compiler_wl='-Qoption ld ' ++ lt_prog_compiler_pic='-PIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ++ sysv4 | sysv4.2uw2* | sysv4.3*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec ;then ++ lt_prog_compiler_pic='-Kconform_pic' ++ lt_prog_compiler_static='-Bstatic' ++ fi ++ ;; ++ ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ++ unicos*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_can_build_shared=no ++ ;; ++ ++ uts4*) ++ lt_prog_compiler_pic='-pic' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ++ *) ++ lt_prog_compiler_can_build_shared=no ++ ;; ++ esac ++ fi ++ ++echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic" >&6 ++ ++# ++# Check to make sure the PIC flag actually works. ++# ++if test -n "$lt_prog_compiler_pic"; then ++ ++echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6 ++if test "${lt_prog_compiler_pic_works+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_prog_compiler_pic_works=no ++ ac_outfile=conftest.$ac_objext ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:6577: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&5 ++ echo "$as_me:6581: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ lt_prog_compiler_pic_works=yes ++ fi ++ fi ++ $rm conftest* ++ ++fi ++echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6 ++ ++if test x"$lt_prog_compiler_pic_works" = xyes; then ++ case $lt_prog_compiler_pic in ++ "" | " "*) ;; ++ *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; ++ esac ++else ++ lt_prog_compiler_pic= ++ lt_prog_compiler_can_build_shared=no ++fi ++ ++fi ++case $host_os in ++ # For platforms which do not support PIC, -DPIC is meaningless: ++ *djgpp*) ++ lt_prog_compiler_pic= ++ ;; ++ *) ++ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" ++ ;; ++esac ++ ++# ++# Check to make sure the static flag actually works. ++# ++wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" ++echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6 ++if test "${lt_prog_compiler_static_works+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_prog_compiler_static_works=no ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS $lt_tmp_static_flag" ++ printf "$lt_simple_link_test_code" > conftest.$ac_ext ++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then ++ # The linker can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ if test -s conftest.err; then ++ # Append any errors to the config.log. ++ cat conftest.err 1>&5 ++ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if diff conftest.exp conftest.er2 >/dev/null; then ++ lt_prog_compiler_static_works=yes ++ fi ++ else ++ lt_prog_compiler_static_works=yes ++ fi ++ fi ++ $rm conftest* ++ LDFLAGS="$save_LDFLAGS" ++ ++fi ++echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5 ++echo "${ECHO_T}$lt_prog_compiler_static_works" >&6 ++ ++if test x"$lt_prog_compiler_static_works" = xyes; then ++ : ++else ++ lt_prog_compiler_static= ++fi ++ ++ ++echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 ++if test "${lt_cv_prog_compiler_c_o+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_c_o=no ++ $rm -r conftest 2>/dev/null ++ mkdir conftest ++ cd conftest ++ mkdir out ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ lt_compiler_flag="-o out/conftest2.$ac_objext" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:6681: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>out/conftest.err) ++ ac_status=$? ++ cat out/conftest.err >&5 ++ echo "$as_me:6685: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s out/conftest2.$ac_objext ++ then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_c_o=yes ++ fi ++ fi ++ chmod u+w . 2>&5 ++ $rm conftest* ++ # SGI C++ compiler will create directory out/ii_files/ for ++ # template instantiation ++ test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files ++ $rm out/* && rmdir out ++ cd .. ++ rmdir conftest ++ $rm conftest* ++ ++fi ++echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6 ++ ++ ++hard_links="nottested" ++if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then ++ # do not overwrite the value of need_locks provided by the user ++ echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 ++ hard_links=yes ++ $rm conftest* ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ touch conftest.a ++ ln conftest.a conftest.b 2>&5 || hard_links=no ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ echo "$as_me:$LINENO: result: $hard_links" >&5 ++echo "${ECHO_T}$hard_links" >&6 ++ if test "$hard_links" = no; then ++ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 ++echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} ++ need_locks=warn ++ fi ++else ++ need_locks=no ++fi ++ ++echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 ++ ++ runpath_var= ++ allow_undefined_flag= ++ enable_shared_with_static_runtimes=no ++ archive_cmds= ++ archive_expsym_cmds= ++ old_archive_From_new_cmds= ++ old_archive_from_expsyms_cmds= ++ export_dynamic_flag_spec= ++ whole_archive_flag_spec= ++ thread_safe_flag_spec= ++ hardcode_libdir_flag_spec= ++ hardcode_libdir_flag_spec_ld= ++ hardcode_libdir_separator= ++ hardcode_direct=no ++ hardcode_minus_L=no ++ hardcode_shlibpath_var=unsupported ++ link_all_deplibs=unknown ++ hardcode_automatic=no ++ module_cmds= ++ module_expsym_cmds= ++ always_export_symbols=no ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ # include_expsyms should be a list of space-separated symbols to be *always* ++ # included in the symbol list ++ include_expsyms= ++ # exclude_expsyms can be an extended regexp of symbols to exclude ++ # it will be wrapped by ` (' and `)$', so one must not match beginning or ++ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', ++ # as well as any symbol that contains `d'. ++ exclude_expsyms="_GLOBAL_OFFSET_TABLE_" ++ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out ++ # platforms (ab)use it in PIC code, but their linkers get confused if ++ # the symbol is explicitly referenced. Since portable code cannot ++ # rely on this symbol name, it's probably fine to never include it in ++ # preloaded symbol tables. ++ extract_expsyms_cmds= ++ # Just being paranoid about ensuring that cc_basename is set. ++ for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++ ++ case $host_os in ++ cygwin* | mingw* | pw32*) ++ # FIXME: the MSVC++ port hasn't been tested in a loooong time ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ if test "$GCC" != yes; then ++ with_gnu_ld=no ++ fi ++ ;; ++ interix*) ++ # we just hope/assume this is gcc and not c89 (= MSVC++) ++ with_gnu_ld=yes ++ ;; ++ openbsd*) ++ with_gnu_ld=no ++ ;; ++ esac ++ ++ ld_shlibs=yes ++ if test "$with_gnu_ld" = yes; then ++ # If archive_cmds runs LD, not CC, wlarc should be empty ++ wlarc='${wl}' ++ ++ # Set some defaults for GNU ld with shared library support. These ++ # are reset later if shared libraries are not supported. Putting them ++ # here allows them to be overridden if necessary. ++ runpath_var=LD_RUN_PATH ++ hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' ++ export_dynamic_flag_spec='${wl}--export-dynamic' ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then ++ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ whole_archive_flag_spec= ++ fi ++ supports_anon_versioning=no ++ case `$LD -v 2>/dev/null` in ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 ++ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... ++ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... ++ *\ 2.11.*) ;; # other 2.11 versions ++ *) supports_anon_versioning=yes ;; ++ esac ++ ++ # See if GNU ld supports shared libraries. ++ case $host_os in ++ aix3* | aix4* | aix5*) ++ # On AIX/PPC, the GNU linker is very broken ++ if test "$host_cpu" != ia64; then ++ ld_shlibs=no ++ cat <&2 ++ ++*** Warning: the GNU linker, at least up to release 2.9.1, is reported ++*** to be unable to reliably create shared libraries on AIX. ++*** Therefore, libtool is disabling shared libraries support. If you ++*** really care for shared libraries, you may want to modify your PATH ++*** so that a non-GNU linker is found, and then restart. ++ ++EOF ++ fi ++ ;; ++ ++ amigaos*) ++ archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_minus_L=yes ++ ++ # Samuel A. Falvo II reports ++ # that the semantics of dynamic libraries on AmigaOS, at least up ++ # to version 4, is to share data among multiple programs linked ++ # with the same dynamic library. Since this doesn't match the ++ # behavior of shared libraries on other platforms, we can't use ++ # them. ++ ld_shlibs=no ++ ;; ++ ++ beos*) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ allow_undefined_flag=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ ++ cygwin* | mingw* | pw32*) ++ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, ++ # as there is no search path for DLLs. ++ hardcode_libdir_flag_spec='-L$libdir' ++ allow_undefined_flag=unsupported ++ always_export_symbols=no ++ enable_shared_with_static_runtimes=yes ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' ++ ++ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ # If the export-symbols file already is a .def file (1st line ++ # is EXPORTS), use it as is; otherwise, prepend... ++ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ cp $export_symbols $output_objdir/$soname.def; ++ else ++ echo EXPORTS > $output_objdir/$soname.def; ++ cat $export_symbols >> $output_objdir/$soname.def; ++ fi~ ++ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ ++ interix3*) ++ hardcode_direct=no ++ hardcode_shlibpath_var=no ++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; ++ ++ linux* | k*bsd*-gnu) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ tmp_addflag= ++ case $cc_basename,$host_cpu in ++ pgcc*) # Portland Group C compiler ++ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag' ++ ;; ++ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers ++ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag -Mnomain' ;; ++ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 ++ tmp_addflag=' -i_dynamic' ;; ++ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 ++ tmp_addflag=' -i_dynamic -nofor_main' ;; ++ ifc* | ifort*) # Intel Fortran compiler ++ tmp_addflag=' -nofor_main' ;; ++ esac ++ archive_cmds='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ ++ if test $supports_anon_versioning = yes; then ++ archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ $echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' ++ fi ++ link_all_deplibs=no ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' ++ wlarc= ++ else ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ fi ++ ;; ++ ++ solaris*) ++ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then ++ ld_shlibs=no ++ cat <&2 ++ ++*** Warning: The releases 2.8.* of the GNU linker cannot reliably ++*** create shared libraries on Solaris systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.9.1 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. ++ ++EOF ++ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ ++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) ++ case `$LD -v 2>&1` in ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ++ ld_shlibs=no ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not ++*** reliably create shared libraries on SCO systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.16.91.0.3 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. ++ ++_LT_EOF ++ ;; ++ *) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ esac ++ ;; ++ ++ sunos4*) ++ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ wlarc= ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ ;; ++ ++ *) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ esac ++ ++ if test "$ld_shlibs" = no; then ++ runpath_var= ++ hardcode_libdir_flag_spec= ++ export_dynamic_flag_spec= ++ whole_archive_flag_spec= ++ fi ++ else ++ # PORTME fill in a description of your system's linker (not GNU ld) ++ case $host_os in ++ aix3*) ++ allow_undefined_flag=unsupported ++ always_export_symbols=yes ++ archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' ++ # Note: this linker hardcodes the directories in LIBPATH if there ++ # are no directories specified by -L. ++ hardcode_minus_L=yes ++ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then ++ # Neither direct hardcoding nor static linking is supported with a ++ # broken collect2. ++ hardcode_direct=unsupported ++ fi ++ ;; ++ ++ aix4* | aix5*) ++ if test "$host_cpu" = ia64; then ++ # On IA64, the linker does run time linking by default, so we don't ++ # have to do anything special. ++ aix_use_runtimelinking=no ++ exp_sym_flag='-Bexport' ++ no_entry_flag="" ++ else ++ # If we're using GNU nm, then we don't want the "-C" option. ++ # -C means demangle to AIX nm, but means don't demangle with GNU nm ++ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then ++ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' ++ else ++ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' ++ fi ++ aix_use_runtimelinking=no ++ ++ # Test if we are trying to use run time linking or normal ++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we ++ # need to do runtime linking. ++ case $host_os in aix4.[23]|aix4.[23].*|aix5*) ++ for ld_flag in $LDFLAGS; do ++ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then ++ aix_use_runtimelinking=yes ++ break ++ fi ++ done ++ ;; ++ esac ++ ++ exp_sym_flag='-bexport' ++ no_entry_flag='-bnoentry' ++ fi ++ ++ # When large executables or shared objects are built, AIX ld can ++ # have problems creating the table of contents. If linking a library ++ # or program results in "error TOC overflow" add -mminimal-toc to ++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not ++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. ++ ++ archive_cmds='' ++ hardcode_direct=yes ++ hardcode_libdir_separator=':' ++ link_all_deplibs=yes ++ ++ if test "$GCC" = yes; then ++ case $host_os in aix4.[012]|aix4.[012].*) ++ # We only want to do this on AIX 4.2 and lower, the check ++ # below for broken collect2 doesn't work under 4.3+ ++ collect2name=`${CC} -print-prog-name=collect2` ++ if test -f "$collect2name" && \ ++ strings "$collect2name" | grep resolve_lib_name >/dev/null ++ then ++ # We have reworked collect2 ++ hardcode_direct=yes ++ else ++ # We have old collect2 ++ hardcode_direct=unsupported ++ # It fails to find uninstalled libraries when the uninstalled ++ # path is not listed in the libpath. Setting hardcode_minus_L ++ # to unsupported forces relinking ++ hardcode_minus_L=yes ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_libdir_separator= ++ fi ++ ;; ++ esac ++ shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi ++ else ++ # not using gcc ++ if test "$host_cpu" = ia64; then ++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release ++ # chokes on -Wl,-G. The following line is correct: ++ shared_flag='-G' ++ else ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag='${wl}-G' ++ else ++ shared_flag='${wl}-bM:SRE' ++ fi ++ fi ++ fi ++ ++ # It seems that -bexpall does not export symbols beginning with ++ # underscore (_), so it is better to generate a list of symbols to export. ++ always_export_symbols=yes ++ if test "$aix_use_runtimelinking" = yes; then ++ # Warning - without using the other runtime loading flags (-brtl), ++ # -berok will link without error, but may produce a broken library. ++ allow_undefined_flag='-berok' ++ # Determine the default libpath from the value encoded in an empty executable. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'`; fi ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++fi ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ ++ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" ++ archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ else ++ if test "$host_cpu" = ia64; then ++ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' ++ allow_undefined_flag="-z nodefs" ++ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" ++ else ++ # Determine the default libpath from the value encoded in an empty executable. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'`; fi ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++fi ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ ++ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" ++ # Warning - without using the other run time loading flags, ++ # -berok will link without error, but may produce a broken library. ++ no_undefined_flag=' ${wl}-bernotok' ++ allow_undefined_flag=' ${wl}-berok' ++ # Exported symbols can be pulled into shared objects from archives ++ whole_archive_flag_spec='$convenience' ++ archive_cmds_need_lc=yes ++ # This is similar to how AIX traditionally builds its shared libraries. ++ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ fi ++ fi ++ ;; ++ ++ amigaos*) ++ archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_minus_L=yes ++ # see comment about different semantics on the GNU ld section ++ ld_shlibs=no ++ ;; ++ ++ bsdi[45]*) ++ export_dynamic_flag_spec=-rdynamic ++ ;; ++ ++ cygwin* | mingw* | pw32*) ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ # hardcode_libdir_flag_spec is actually meaningless, as there is ++ # no search path for DLLs. ++ hardcode_libdir_flag_spec=' ' ++ allow_undefined_flag=unsupported ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' ++ # The linker will automatically build a .lib file if we build a DLL. ++ old_archive_From_new_cmds='true' ++ # FIXME: Should let the user specify the lib program. ++ old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' ++ fix_srcfile_path='`cygpath -w "$srcfile"`' ++ enable_shared_with_static_runtimes=yes ++ ;; ++ ++ darwin* | rhapsody*) ++ case $host_os in ++ rhapsody* | darwin1.[012]) ++ allow_undefined_flag='${wl}-undefined ${wl}suppress' ++ ;; ++ *) # Darwin 1.3 on ++ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then ++ allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ else ++ case ${MACOSX_DEPLOYMENT_TARGET} in ++ 10.[012]) ++ allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ ;; ++ 10.*) ++ allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup' ++ ;; ++ esac ++ fi ++ ;; ++ esac ++ archive_cmds_need_lc=no ++ hardcode_direct=no ++ hardcode_automatic=yes ++ hardcode_shlibpath_var=unsupported ++ whole_archive_flag_spec='' ++ link_all_deplibs=yes ++ if test "$GCC" = yes ; then ++ output_verbose_link_cmd='echo' ++ archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' ++ module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ else ++ case $cc_basename in ++ xlc*) ++ output_verbose_link_cmd='echo' ++ archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' ++ module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ ;; ++ *) ++ ld_shlibs=no ++ ;; ++ esac ++ fi ++ ;; ++ ++ dgux*) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_shlibpath_var=no ++ ;; ++ ++ freebsd1*) ++ ld_shlibs=no ++ ;; ++ ++ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor ++ # support. Future versions do this automatically, but an explicit c++rt0.o ++ # does not break anything, and helps significantly (at the cost of a little ++ # extra space). ++ freebsd2.2*) ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ ;; ++ ++ # Unfortunately, older versions of FreeBSD 2 do not have this feature. ++ freebsd2*) ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=yes ++ hardcode_minus_L=yes ++ hardcode_shlibpath_var=no ++ ;; ++ ++ # FreeBSD 3 and greater uses gcc -shared to do shared libraries. ++ freebsd* | dragonfly*) ++ archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ ;; ++ ++ hpux9*) ++ if test "$GCC" = yes; then ++ archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ else ++ archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ fi ++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator=: ++ hardcode_direct=yes ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L=yes ++ export_dynamic_flag_spec='${wl}-E' ++ ;; ++ ++ hpux10*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ if test "$with_gnu_ld" = no; then ++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator=: ++ ++ hardcode_direct=yes ++ export_dynamic_flag_spec='${wl}-E' ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L=yes ++ fi ++ ;; ++ ++ hpux11*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ else ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ fi ++ if test "$with_gnu_ld" = no; then ++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator=: ++ ++ case $host_cpu in ++ hppa*64*|ia64*) ++ hardcode_libdir_flag_spec_ld='+b $libdir' ++ hardcode_direct=no ++ hardcode_shlibpath_var=no ++ ;; ++ *) ++ hardcode_direct=yes ++ export_dynamic_flag_spec='${wl}-E' ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L=yes ++ ;; ++ esac ++ fi ++ ;; ++ ++ irix5* | irix6* | nonstopux*) ++ if test "$GCC" = yes; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ hardcode_libdir_flag_spec_ld='-rpath $libdir' ++ fi ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator=: ++ link_all_deplibs=yes ++ ;; ++ ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out ++ else ++ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF ++ fi ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ ;; ++ ++ newsos6) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=yes ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator=: ++ hardcode_shlibpath_var=no ++ ;; ++ ++ openbsd*) ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' ++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec='${wl}-E' ++ else ++ case $host_os in ++ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec='-R$libdir' ++ ;; ++ *) ++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ ;; ++ esac ++ fi ++ ;; ++ ++ os2*) ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_minus_L=yes ++ allow_undefined_flag=unsupported ++ archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' ++ old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ++ ;; ++ ++ osf3*) ++ if test "$GCC" = yes; then ++ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ allow_undefined_flag=' -expect_unresolved \*' ++ archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ fi ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator=: ++ ;; ++ ++ osf4* | osf5*) # as osf3* with the addition of -msym flag ++ if test "$GCC" = yes; then ++ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ else ++ allow_undefined_flag=' -expect_unresolved \*' ++ archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ ++ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' ++ ++ # Both c and cxx compiler support -rpath directly ++ hardcode_libdir_flag_spec='-rpath $libdir' ++ fi ++ hardcode_libdir_separator=: ++ ;; ++ ++ solaris*) ++ no_undefined_flag=' -z text' ++ if test "$GCC" = yes; then ++ wlarc='${wl}' ++ archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ ++ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' ++ else ++ wlarc='' ++ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ ++ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' ++ fi ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_shlibpath_var=no ++ case $host_os in ++ solaris2.[0-5] | solaris2.[0-5].*) ;; ++ *) ++ # The compiler driver will combine linker options so we ++ # cannot just pass the convience library names through ++ # without $wl, iff we do not link with $LD. ++ # Luckily, gcc supports the same syntax we need for Sun Studio. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ case $wlarc in ++ '') ++ whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; ++ *) ++ whole_archive_flag_spec='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; ++ esac ;; ++ esac ++ link_all_deplibs=yes ++ ;; ++ ++ sunos4*) ++ if test "x$host_vendor" = xsequent; then ++ # Use $CC to link under sequent, because it throws in some extra .o ++ # files that make .init and .fini sections work. ++ archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_direct=yes ++ hardcode_minus_L=yes ++ hardcode_shlibpath_var=no ++ ;; ++ ++ sysv4) ++ case $host_vendor in ++ sni) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=yes # is this really true??? ++ ;; ++ siemens) ++ ## LD is ld it makes a PLAMLIB ++ ## CC just makes a GrossModule. ++ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' ++ reload_cmds='$CC -r -o $output$reload_objs' ++ hardcode_direct=no ++ ;; ++ motorola) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=no #Motorola manual says yes, but my tests say they lie ++ ;; ++ esac ++ runpath_var='LD_RUN_PATH' ++ hardcode_shlibpath_var=no ++ ;; ++ ++ sysv4.3*) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_shlibpath_var=no ++ export_dynamic_flag_spec='-Bexport' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_shlibpath_var=no ++ runpath_var=LD_RUN_PATH ++ hardcode_runpath_var=yes ++ ld_shlibs=yes ++ fi ++ ;; ++ ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*) ++ no_undefined_flag='${wl}-z,text' ++ archive_cmds_need_lc=no ++ hardcode_shlibpath_var=no ++ runpath_var='LD_RUN_PATH' ++ ++ if test "$GCC" = yes; then ++ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; ++ ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ no_undefined_flag='${wl}-z,text' ++ allow_undefined_flag='${wl}-z,nodefs' ++ archive_cmds_need_lc=no ++ hardcode_shlibpath_var=no ++ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' ++ hardcode_libdir_separator=':' ++ link_all_deplibs=yes ++ export_dynamic_flag_spec='${wl}-Bexport' ++ runpath_var='LD_RUN_PATH' ++ ++ if test "$GCC" = yes; then ++ archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; ++ ++ uts4*) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_shlibpath_var=no ++ ;; ++ ++ *) ++ ld_shlibs=no ++ ;; ++ esac ++ fi ++ ++echo "$as_me:$LINENO: result: $ld_shlibs" >&5 ++echo "${ECHO_T}$ld_shlibs" >&6 ++test "$ld_shlibs" = no && can_build_shared=no ++ ++# ++# Do we need to explicitly link libc? ++# ++case "x$archive_cmds_need_lc" in ++x|xyes) ++ # Assume -lc should be added ++ archive_cmds_need_lc=yes ++ ++ if test "$enable_shared" = yes && test "$GCC" = yes; then ++ case $archive_cmds in ++ *'~'*) ++ # FIXME: we may have to deal with multi-command sequences. ++ ;; ++ '$CC '*) ++ # Test whether the compiler implicitly links with -lc since on some ++ # systems, -lgcc has to come before -lc. If gcc already passes -lc ++ # to ld, don't add -lc before -lgcc. ++ echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 ++ $rm conftest* ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } 2>conftest.err; then ++ soname=conftest ++ lib=conftest ++ libobjs=conftest.$ac_objext ++ deplibs= ++ wl=$lt_prog_compiler_wl ++ pic_flag=$lt_prog_compiler_pic ++ compiler_flags=-v ++ linker_flags=-v ++ verstring= ++ output_objdir=. ++ libname=conftest ++ lt_save_allow_undefined_flag=$allow_undefined_flag ++ allow_undefined_flag= ++ if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 ++ (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++ then ++ archive_cmds_need_lc=no ++ else ++ archive_cmds_need_lc=yes ++ fi ++ allow_undefined_flag=$lt_save_allow_undefined_flag ++ else ++ cat conftest.err 1>&5 ++ fi ++ $rm conftest* ++ echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 ++echo "${ECHO_T}$archive_cmds_need_lc" >&6 ++ ;; ++ esac ++ fi ++ ;; ++esac ++ ++echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 ++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 ++library_names_spec= ++libname_spec='lib$name' ++soname_spec= ++shrext_cmds=".so" ++postinstall_cmds= ++postuninstall_cmds= ++finish_cmds= ++finish_eval= ++shlibpath_var= ++shlibpath_overrides_runpath=unknown ++version_type=none ++dynamic_linker="$host_os ld.so" ++sys_lib_dlsearch_path_spec="/lib /usr/lib" ++if test "$GCC" = yes; then ++ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then ++ # if the path contains ";" then we assume it to be the separator ++ # otherwise default to the standard path separator (i.e. ":") - it is ++ # assumed that no part of a normal pathname contains ";" but that should ++ # okay in the real world where ";" in dirpaths is itself problematic. ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++else ++ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" ++fi ++need_lib_prefix=unknown ++hardcode_into_libs=no ++ ++# when you set need_version to no, make sure it does not cause -set_version ++# flags to be left without arguments ++need_version=unknown ++ ++case $host_os in ++aix3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' ++ shlibpath_var=LIBPATH ++ ++ # AIX 3 has no versioning support, so we append a major version to the name. ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; ++ ++aix4* | aix5*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ hardcode_into_libs=yes ++ if test "$host_cpu" = ia64; then ++ # AIX 5 supports IA64 ++ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ else ++ # With GCC up to 2.95.x, collect2 would create an import file ++ # for dependence libraries. The import file would start with ++ # the line `#! .'. This would cause the generated library to ++ # depend on `.', always an invalid library. This was fixed in ++ # development snapshots of GCC prior to 3.0. ++ case $host_os in ++ aix4 | aix4.[01] | aix4.[01].*) ++ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' ++ echo ' yes ' ++ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then ++ : ++ else ++ can_build_shared=no ++ fi ++ ;; ++ esac ++ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct ++ # soname into executable. Probably we can add versioning support to ++ # collect2, so additional links can be useful in future. ++ if test "$aix_use_runtimelinking" = yes; then ++ # If using run time linking (on AIX 4.2 or later) use lib.so ++ # instead of lib.a to let people know that these are not ++ # typical AIX shared libraries. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ else ++ # We preserve .a as extension for shared libraries through AIX4.2 ++ # and later when we are not doing run time linking. ++ library_names_spec='${libname}${release}.a $libname.a' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ fi ++ shlibpath_var=LIBPATH ++ fi ++ ;; ++ ++amigaos*) ++ library_names_spec='$libname.ixlibrary $libname.a' ++ # Create ${libname}_ixlibrary.a entries in /sys/libs. ++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ++ ;; ++ ++beos*) ++ library_names_spec='${libname}${shared_ext}' ++ dynamic_linker="$host_os ld.so" ++ shlibpath_var=LIBRARY_PATH ++ ;; ++ ++bsdi[45]*) ++ version_type=linux ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" ++ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" ++ # the default ld.so.conf also contains /usr/contrib/lib and ++ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow ++ # libtool to hard-code these into programs ++ ;; ++ ++cygwin* | mingw* | pw32*) ++ version_type=windows ++ shrext_cmds=".dll" ++ need_version=no ++ need_lib_prefix=no ++ ++ case $GCC,$host_os in ++ yes,cygwin* | yes,mingw* | yes,pw32*) ++ library_names_spec='$libname.dll.a' ++ # DLL is installed to $(libdir)/../bin by postinstall_cmds ++ postinstall_cmds='base_file=`basename \${file}`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ ++ dldir=$destdir/`dirname \$dlpath`~ ++ test -d \$dldir || mkdir -p \$dldir~ ++ $install_prog $dir/$dlname \$dldir/$dlname~ ++ chmod a+x \$dldir/$dlname' ++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ ++ dlpath=$dir/\$dldll~ ++ $rm \$dlpath' ++ shlibpath_overrides_runpath=yes ++ ++ case $host_os in ++ cygwin*) ++ # Cygwin DLLs use 'cyg' prefix rather than 'lib' ++ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ++ ;; ++ mingw*) ++ # MinGW DLLs use traditional 'lib' prefix ++ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then ++ # It is most probably a Windows format PATH printed by ++ # mingw gcc, but we are running on Cygwin. Gcc prints its search ++ # path with ; separators, and with drive letters. We can handle the ++ # drive letters (cygwin fileutils understands them), so leave them, ++ # especially as we might pass files found there to a mingw objdump, ++ # which wouldn't understand a cygwinified path. Ahh. ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ ;; ++ pw32*) ++ # pw32 DLLs use 'pw' prefix rather than 'lib' ++ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ ;; ++ esac ++ ;; ++ ++ *) ++ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ++ ;; ++ esac ++ dynamic_linker='Win32 ld.exe' ++ # FIXME: first we should search . and the directory the executable is in ++ shlibpath_var=PATH ++ ;; ++ ++darwin* | rhapsody*) ++ dynamic_linker="$host_os dyld" ++ version_type=darwin ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' ++ soname_spec='${libname}${release}${major}$shared_ext' ++ shlibpath_overrides_runpath=yes ++ shlibpath_var=DYLD_LIBRARY_PATH ++ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' ++ # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. ++ if test "$GCC" = yes; then ++ sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` ++ else ++ sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' ++ fi ++ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ++ ;; ++ ++dgux*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; ++ ++freebsd1*) ++ dynamic_linker=no ++ ;; ++ ++freebsd* | dragonfly*) ++ # DragonFly does not have aout. When/if they implement a new ++ # versioning mechanism, adjust this. ++ if test -x /usr/bin/objformat; then ++ objformat=`/usr/bin/objformat` ++ else ++ case $host_os in ++ freebsd[123]*) objformat=aout ;; ++ *) objformat=elf ;; ++ esac ++ fi ++ version_type=freebsd-$objformat ++ case $version_type in ++ freebsd-elf*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ need_version=no ++ need_lib_prefix=no ++ ;; ++ freebsd-*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' ++ need_version=yes ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_os in ++ freebsd2*) ++ shlibpath_overrides_runpath=yes ++ ;; ++ freebsd3.[01]* | freebsdelf3.[01]*) ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ ++ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ freebsd*) # from 4.6 on ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ esac ++ ;; ++ ++gnu*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ ;; ++ ++hpux9* | hpux10* | hpux11*) ++ # Give a soname corresponding to the major version so that dld.sl refuses to ++ # link against other versions. ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ case $host_cpu in ++ ia64*) ++ shrext_cmds='.so' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.so" ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ if test "X$HPUX_IA64_MODE" = X32; then ++ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" ++ else ++ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" ++ fi ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ hppa*64*) ++ shrext_cmds='.sl' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ *) ++ shrext_cmds='.sl' ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=SHLIB_PATH ++ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; ++ esac ++ # HP-UX runs *really* slowly unless shared libraries are mode 555. ++ postinstall_cmds='chmod 555 $lib' ++ ;; ++ ++interix3*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ ++irix5* | irix6* | nonstopux*) ++ case $host_os in ++ nonstopux*) version_type=nonstopux ;; ++ *) ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ version_type=linux ++ else ++ version_type=irix ++ fi ;; ++ esac ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' ++ case $host_os in ++ irix5* | nonstopux*) ++ libsuff= shlibsuff= ++ ;; ++ *) ++ case $LD in # libtool.m4 will add one of these switches to LD ++ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") ++ libsuff= shlibsuff= libmagic=32-bit;; ++ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") ++ libsuff=32 shlibsuff=N32 libmagic=N32;; ++ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") ++ libsuff=64 shlibsuff=64 libmagic=64-bit;; ++ *) libsuff= shlibsuff= libmagic=never-match;; ++ esac ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" ++ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" ++ hardcode_into_libs=yes ++ ;; ++ ++# No shared lib support for Linux oldld, aout, or coff. ++linux*oldld* | linux*aout* | linux*coff*) ++ dynamic_linker=no ++ ;; ++ ++# This must be Linux ELF. ++linux* | k*bsd*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ # This implies no fast_install, which is unacceptable. ++ # Some rework will be needed to allow for fast_install ++ # before this can be enabled. ++ hardcode_into_libs=yes ++ ++ # Append ld.so.conf contents to the search path ++ if test -f /etc/ld.so.conf; then ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" ++ fi ++ ++ # We used to test for /lib/ld.so.1 and disable shared libraries on ++ # powerpc, because MkLinux only supported shared libraries with the ++ # GNU dynamic linker. Since this was broken with cross compilers, ++ # most powerpc-linux boxes support dynamic linking these days and ++ # people can always --disable-shared, the test was removed, and we ++ # assume the GNU/Linux dynamic linker is in use. ++ dynamic_linker='GNU/Linux ld.so' ++ ;; ++ ++netbsdelf*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='NetBSD ld.elf_so' ++ ;; ++ ++netbsd*) ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ dynamic_linker='NetBSD (a.out) ld.so' ++ else ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='NetBSD ld.elf_so' ++ fi ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ ++newsos6) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ ;; ++ ++nto-qnx*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ ;; ++ ++openbsd*) ++ version_type=sunos ++ sys_lib_dlsearch_path_spec="/usr/lib" ++ need_lib_prefix=no ++ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. ++ case $host_os in ++ openbsd3.3 | openbsd3.3.*) need_version=yes ;; ++ *) need_version=no ;; ++ esac ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ case $host_os in ++ openbsd2.[89] | openbsd2.[89].*) ++ shlibpath_overrides_runpath=no ++ ;; ++ *) ++ shlibpath_overrides_runpath=yes ++ ;; ++ esac ++ else ++ shlibpath_overrides_runpath=yes ++ fi ++ ;; ++ ++os2*) ++ libname_spec='$name' ++ shrext_cmds=".dll" ++ need_lib_prefix=no ++ library_names_spec='$libname${shared_ext} $libname.a' ++ dynamic_linker='OS/2 ld.exe' ++ shlibpath_var=LIBPATH ++ ;; ++ ++osf3* | osf4* | osf5*) ++ version_type=osf ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" ++ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ++ ;; ++ ++solaris*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ # ldd complains unless libraries are executable ++ postinstall_cmds='chmod +x $lib' ++ ;; ++ ++sunos4*) ++ version_type=sunos ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ if test "$with_gnu_ld" = yes; then ++ need_lib_prefix=no ++ fi ++ need_version=yes ++ ;; ++ ++sysv4 | sysv4.3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_vendor in ++ sni) ++ shlibpath_overrides_runpath=no ++ need_lib_prefix=no ++ export_dynamic_flag_spec='${wl}-Blargedynsym' ++ runpath_var=LD_RUN_PATH ++ ;; ++ siemens) ++ need_lib_prefix=no ++ ;; ++ motorola) ++ need_lib_prefix=no ++ need_version=no ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ++ ;; ++ esac ++ ;; ++ ++sysv4*MP*) ++ if test -d /usr/nec ;then ++ version_type=linux ++ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' ++ soname_spec='$libname${shared_ext}.$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ fi ++ ;; ++ ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ version_type=freebsd-elf ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ if test "$with_gnu_ld" = yes; then ++ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' ++ shlibpath_overrides_runpath=no ++ else ++ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' ++ shlibpath_overrides_runpath=yes ++ case $host_os in ++ sco3.2v5*) ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ++ ;; ++ esac ++ fi ++ sys_lib_dlsearch_path_spec='/usr/lib' ++ ;; ++ ++uts4*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; ++ ++*) ++ dynamic_linker=no ++ ;; ++esac ++echo "$as_me:$LINENO: result: $dynamic_linker" >&5 ++echo "${ECHO_T}$dynamic_linker" >&6 ++test "$dynamic_linker" = no && can_build_shared=no ++ ++variables_saved_for_relink="PATH $shlibpath_var $runpath_var" ++if test "$GCC" = yes; then ++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" ++fi ++ ++echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 ++hardcode_action= ++if test -n "$hardcode_libdir_flag_spec" || \ ++ test -n "$runpath_var" || \ ++ test "X$hardcode_automatic" = "Xyes" ; then ++ ++ # We can hardcode non-existant directories. ++ if test "$hardcode_direct" != no && ++ # If the only mechanism to avoid hardcoding is shlibpath_var, we ++ # have to relink, otherwise we might link with an installed library ++ # when we should be linking with a yet-to-be-installed one ++ ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no && ++ test "$hardcode_minus_L" != no; then ++ # Linking always hardcodes the temporary library directory. ++ hardcode_action=relink ++ else ++ # We can link without hardcoding, and we can hardcode nonexisting dirs. ++ hardcode_action=immediate ++ fi ++else ++ # We cannot hardcode anything, or else we can only hardcode existing ++ # directories. ++ hardcode_action=unsupported ++fi ++echo "$as_me:$LINENO: result: $hardcode_action" >&5 ++echo "${ECHO_T}$hardcode_action" >&6 ++ ++if test "$hardcode_action" = relink; then ++ # Fast installation is not supported ++ enable_fast_install=no ++elif test "$shlibpath_overrides_runpath" = yes || ++ test "$enable_shared" = no; then ++ # Fast installation is not necessary ++ enable_fast_install=needless ++fi ++ ++striplib= ++old_striplib= ++echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 ++echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 ++if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then ++ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" ++ test -z "$striplib" && striplib="$STRIP --strip-unneeded" ++ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6 ++else ++# FIXME - insert some real tests, host_os isn't really good enough ++ case $host_os in ++ darwin*) ++ if test -n "$STRIP" ; then ++ striplib="$STRIP -x" ++ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6 ++ else ++ echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6 ++fi ++ ;; ++ *) ++ echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6 ++ ;; ++ esac ++fi ++ ++if test "x$enable_dlopen" != xyes; then ++ enable_dlopen=unknown ++ enable_dlopen_self=unknown ++ enable_dlopen_self_static=unknown ++else ++ lt_cv_dlopen=no ++ lt_cv_dlopen_libs= ++ ++ case $host_os in ++ beos*) ++ lt_cv_dlopen="load_add_on" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes ++ ;; ++ ++ mingw* | pw32*) ++ lt_cv_dlopen="LoadLibrary" ++ lt_cv_dlopen_libs= ++ ;; ++ ++ cygwin*) ++ lt_cv_dlopen="dlopen" ++ lt_cv_dlopen_libs= ++ ;; ++ ++ darwin*) ++ # if libdl is installed we need to link against it ++ echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 ++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 ++if test "${ac_cv_lib_dl_dlopen+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldl $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any gcc2 internal prototype to avoid an error. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++/* We use char because int might match the return type of a gcc2 ++ builtin and then its argument prototype would still apply. */ ++char dlopen (); ++int ++main () ++{ ++dlopen (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_cv_lib_dl_dlopen=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ac_cv_lib_dl_dlopen=no ++fi ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 ++if test $ac_cv_lib_dl_dlopen = yes; then ++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" ++else ++ ++ lt_cv_dlopen="dyld" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes ++ ++fi ++ ++ ;; ++ ++ *) ++ echo "$as_me:$LINENO: checking for shl_load" >&5 ++echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 ++if test "${ac_cv_func_shl_load+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define shl_load to an innocuous variant, in case declares shl_load. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define shl_load innocuous_shl_load ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char shl_load (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef shl_load ++ ++/* Override any gcc2 internal prototype to avoid an error. */ ++#ifdef __cplusplus ++extern "C" ++{ ++#endif ++/* We use char because int might match the return type of a gcc2 ++ builtin and then its argument prototype would still apply. */ ++char shl_load (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined (__stub_shl_load) || defined (__stub___shl_load) ++choke me ++#else ++char (*f) () = shl_load; ++#endif ++#ifdef __cplusplus ++} ++#endif ++ ++int ++main () ++{ ++return f != shl_load; ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_cv_func_shl_load=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ac_cv_func_shl_load=no ++fi ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 ++echo "${ECHO_T}$ac_cv_func_shl_load" >&6 ++if test $ac_cv_func_shl_load = yes; then ++ lt_cv_dlopen="shl_load" ++else ++ echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 ++echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 ++if test "${ac_cv_lib_dld_shl_load+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldld $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any gcc2 internal prototype to avoid an error. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++/* We use char because int might match the return type of a gcc2 ++ builtin and then its argument prototype would still apply. */ ++char shl_load (); ++int ++main () ++{ ++shl_load (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_cv_lib_dld_shl_load=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ac_cv_lib_dld_shl_load=no ++fi ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 ++echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 ++if test $ac_cv_lib_dld_shl_load = yes; then ++ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" ++else ++ echo "$as_me:$LINENO: checking for dlopen" >&5 ++echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 ++if test "${ac_cv_func_dlopen+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define dlopen to an innocuous variant, in case declares dlopen. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define dlopen innocuous_dlopen ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char dlopen (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef dlopen ++ ++/* Override any gcc2 internal prototype to avoid an error. */ ++#ifdef __cplusplus ++extern "C" ++{ ++#endif ++/* We use char because int might match the return type of a gcc2 ++ builtin and then its argument prototype would still apply. */ ++char dlopen (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined (__stub_dlopen) || defined (__stub___dlopen) ++choke me ++#else ++char (*f) () = dlopen; ++#endif ++#ifdef __cplusplus ++} ++#endif ++ ++int ++main () ++{ ++return f != dlopen; ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_cv_func_dlopen=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ac_cv_func_dlopen=no ++fi ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_func_dlopen" >&6 ++if test $ac_cv_func_dlopen = yes; then ++ lt_cv_dlopen="dlopen" ++else ++ echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 ++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 ++if test "${ac_cv_lib_dl_dlopen+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldl $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any gcc2 internal prototype to avoid an error. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++/* We use char because int might match the return type of a gcc2 ++ builtin and then its argument prototype would still apply. */ ++char dlopen (); ++int ++main () ++{ ++dlopen (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_cv_lib_dl_dlopen=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ac_cv_lib_dl_dlopen=no ++fi ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 ++if test $ac_cv_lib_dl_dlopen = yes; then ++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" ++else ++ echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 ++echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 ++if test "${ac_cv_lib_svld_dlopen+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lsvld $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any gcc2 internal prototype to avoid an error. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++/* We use char because int might match the return type of a gcc2 ++ builtin and then its argument prototype would still apply. */ ++char dlopen (); ++int ++main () ++{ ++dlopen (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_cv_lib_svld_dlopen=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ac_cv_lib_svld_dlopen=no ++fi ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 ++if test $ac_cv_lib_svld_dlopen = yes; then ++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" ++else ++ echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 ++echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 ++if test "${ac_cv_lib_dld_dld_link+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldld $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any gcc2 internal prototype to avoid an error. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++/* We use char because int might match the return type of a gcc2 ++ builtin and then its argument prototype would still apply. */ ++char dld_link (); ++int ++main () ++{ ++dld_link (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_cv_lib_dld_dld_link=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ac_cv_lib_dld_dld_link=no ++fi ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 ++echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 ++if test $ac_cv_lib_dld_dld_link = yes; then ++ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" ++fi ++ ++ ++fi ++ ++ ++fi ++ ++ ++fi ++ ++ ++fi ++ ++ ++fi ++ ++ ;; ++ esac ++ ++ if test "x$lt_cv_dlopen" != xno; then ++ enable_dlopen=yes ++ else ++ enable_dlopen=no ++ fi ++ ++ case $lt_cv_dlopen in ++ dlopen) ++ save_CPPFLAGS="$CPPFLAGS" ++ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" ++ ++ save_LDFLAGS="$LDFLAGS" ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" ++ ++ save_LIBS="$LIBS" ++ LIBS="$lt_cv_dlopen_libs $LIBS" ++ ++ echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 ++echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 ++if test "${lt_cv_dlopen_self+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test "$cross_compiling" = yes; then : ++ lt_cv_dlopen_self=cross ++else ++ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 ++ lt_status=$lt_dlunknown ++ cat > conftest.$ac_ext < ++#endif ++ ++#include ++ ++#ifdef RTLD_GLOBAL ++# define LT_DLGLOBAL RTLD_GLOBAL ++#else ++# ifdef DL_GLOBAL ++# define LT_DLGLOBAL DL_GLOBAL ++# else ++# define LT_DLGLOBAL 0 ++# endif ++#endif ++ ++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we ++ find out it does not work in some platform. */ ++#ifndef LT_DLLAZY_OR_NOW ++# ifdef RTLD_LAZY ++# define LT_DLLAZY_OR_NOW RTLD_LAZY ++# else ++# ifdef DL_LAZY ++# define LT_DLLAZY_OR_NOW DL_LAZY ++# else ++# ifdef RTLD_NOW ++# define LT_DLLAZY_OR_NOW RTLD_NOW ++# else ++# ifdef DL_NOW ++# define LT_DLLAZY_OR_NOW DL_NOW ++# else ++# define LT_DLLAZY_OR_NOW 0 ++# endif ++# endif ++# endif ++# endif ++#endif ++ ++#ifdef __cplusplus ++extern "C" void exit (int); ++#endif ++ ++void fnord() { int i=42;} ++int main () ++{ ++ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); ++ int status = $lt_dlunknown; ++ ++ if (self) ++ { ++ if (dlsym (self,"fnord")) status = $lt_dlno_uscore; ++ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; ++ /* dlclose (self); */ ++ } ++ else ++ puts (dlerror ()); ++ ++ exit (status); ++} ++EOF ++ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then ++ (./conftest; exit; ) >&5 2>/dev/null ++ lt_status=$? ++ case x$lt_status in ++ x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; ++ x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; ++ x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; ++ esac ++ else : ++ # compilation failed ++ lt_cv_dlopen_self=no ++ fi ++fi ++rm -fr conftest* ++ ++ ++fi ++echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 ++echo "${ECHO_T}$lt_cv_dlopen_self" >&6 ++ ++ if test "x$lt_cv_dlopen_self" = xyes; then ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" ++ echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 ++echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 ++if test "${lt_cv_dlopen_self_static+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test "$cross_compiling" = yes; then : ++ lt_cv_dlopen_self_static=cross ++else ++ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 ++ lt_status=$lt_dlunknown ++ cat > conftest.$ac_ext < ++#endif ++ ++#include ++ ++#ifdef RTLD_GLOBAL ++# define LT_DLGLOBAL RTLD_GLOBAL ++#else ++# ifdef DL_GLOBAL ++# define LT_DLGLOBAL DL_GLOBAL ++# else ++# define LT_DLGLOBAL 0 ++# endif ++#endif ++ ++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we ++ find out it does not work in some platform. */ ++#ifndef LT_DLLAZY_OR_NOW ++# ifdef RTLD_LAZY ++# define LT_DLLAZY_OR_NOW RTLD_LAZY ++# else ++# ifdef DL_LAZY ++# define LT_DLLAZY_OR_NOW DL_LAZY ++# else ++# ifdef RTLD_NOW ++# define LT_DLLAZY_OR_NOW RTLD_NOW ++# else ++# ifdef DL_NOW ++# define LT_DLLAZY_OR_NOW DL_NOW ++# else ++# define LT_DLLAZY_OR_NOW 0 ++# endif ++# endif ++# endif ++# endif ++#endif ++ ++#ifdef __cplusplus ++extern "C" void exit (int); ++#endif ++ ++void fnord() { int i=42;} ++int main () ++{ ++ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); ++ int status = $lt_dlunknown; ++ ++ if (self) ++ { ++ if (dlsym (self,"fnord")) status = $lt_dlno_uscore; ++ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; ++ /* dlclose (self); */ ++ } ++ else ++ puts (dlerror ()); ++ ++ exit (status); ++} ++EOF ++ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then ++ (./conftest; exit; ) >&5 2>/dev/null ++ lt_status=$? ++ case x$lt_status in ++ x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; ++ x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; ++ x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; ++ esac ++ else : ++ # compilation failed ++ lt_cv_dlopen_self_static=no ++ fi ++fi ++rm -fr conftest* ++ ++ ++fi ++echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 ++echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 ++ fi ++ ++ CPPFLAGS="$save_CPPFLAGS" ++ LDFLAGS="$save_LDFLAGS" ++ LIBS="$save_LIBS" ++ ;; ++ esac ++ ++ case $lt_cv_dlopen_self in ++ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; ++ *) enable_dlopen_self=unknown ;; ++ esac ++ ++ case $lt_cv_dlopen_self_static in ++ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; ++ *) enable_dlopen_self_static=unknown ;; ++ esac ++fi ++ ++ ++# Report which library types will actually be built ++echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 ++echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 ++echo "$as_me:$LINENO: result: $can_build_shared" >&5 ++echo "${ECHO_T}$can_build_shared" >&6 ++ ++echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 ++echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 ++test "$can_build_shared" = "no" && enable_shared=no ++ ++# On AIX, shared libraries and static libraries use the same namespace, and ++# are all built from PIC. ++case $host_os in ++aix3*) ++ test "$enable_shared" = yes && enable_static=no ++ if test -n "$RANLIB"; then ++ archive_cmds="$archive_cmds~\$RANLIB \$lib" ++ postinstall_cmds='$RANLIB $lib' ++ fi ++ ;; ++ ++aix4* | aix5*) ++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then ++ test "$enable_shared" = yes && enable_static=no ++ fi ++ ;; ++esac ++echo "$as_me:$LINENO: result: $enable_shared" >&5 ++echo "${ECHO_T}$enable_shared" >&6 ++ ++echo "$as_me:$LINENO: checking whether to build static libraries" >&5 ++echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 ++# Make sure either enable_shared or enable_static is yes. ++test "$enable_shared" = yes || enable_static=yes ++echo "$as_me:$LINENO: result: $enable_static" >&5 ++echo "${ECHO_T}$enable_static" >&6 ++ ++# The else clause should only fire when bootstrapping the ++# libtool distribution, otherwise you forgot to ship ltmain.sh ++# with your package, and you will get complaints that there are ++# no rules to generate ltmain.sh. ++if test -f "$ltmain"; then ++ # See if we are running on zsh, and set the options which allow our commands through ++ # without removal of \ escapes. ++ if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++ fi ++ # Now quote all the things that may contain metacharacters while being ++ # careful not to overquote the AC_SUBSTed values. We take copies of the ++ # variables and quote the copies for generation of the libtool script. ++ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ ++ SED SHELL STRIP \ ++ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ ++ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ ++ deplibs_check_method reload_flag reload_cmds need_locks \ ++ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ ++ lt_cv_sys_global_symbol_to_c_name_address \ ++ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ ++ old_postinstall_cmds old_postuninstall_cmds \ ++ compiler \ ++ CC \ ++ LD \ ++ lt_prog_compiler_wl \ ++ lt_prog_compiler_pic \ ++ lt_prog_compiler_static \ ++ lt_prog_compiler_no_builtin_flag \ ++ export_dynamic_flag_spec \ ++ thread_safe_flag_spec \ ++ whole_archive_flag_spec \ ++ enable_shared_with_static_runtimes \ ++ old_archive_cmds \ ++ old_archive_from_new_cmds \ ++ predep_objects \ ++ postdep_objects \ ++ predeps \ ++ postdeps \ ++ compiler_lib_search_path \ ++ archive_cmds \ ++ archive_expsym_cmds \ ++ postinstall_cmds \ ++ postuninstall_cmds \ ++ old_archive_from_expsyms_cmds \ ++ allow_undefined_flag \ ++ no_undefined_flag \ ++ export_symbols_cmds \ ++ hardcode_libdir_flag_spec \ ++ hardcode_libdir_flag_spec_ld \ ++ hardcode_libdir_separator \ ++ hardcode_automatic \ ++ module_cmds \ ++ module_expsym_cmds \ ++ lt_cv_prog_compiler_c_o \ ++ exclude_expsyms \ ++ include_expsyms; do ++ ++ case $var in ++ old_archive_cmds | \ ++ old_archive_from_new_cmds | \ ++ archive_cmds | \ ++ archive_expsym_cmds | \ ++ module_cmds | \ ++ module_expsym_cmds | \ ++ old_archive_from_expsyms_cmds | \ ++ export_symbols_cmds | \ ++ extract_expsyms_cmds | reload_cmds | finish_cmds | \ ++ postinstall_cmds | postuninstall_cmds | \ ++ old_postinstall_cmds | old_postuninstall_cmds | \ ++ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) ++ # Double-quote double-evaled strings. ++ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ++ ;; ++ *) ++ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ++ ;; ++ esac ++ done ++ ++ case $lt_echo in ++ *'\$0 --fallback-echo"') ++ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` ++ ;; ++ esac ++ ++cfgfile="${ofile}T" ++ trap "$rm \"$cfgfile\"; exit 1" 1 2 15 ++ $rm -f "$cfgfile" ++ { echo "$as_me:$LINENO: creating $ofile" >&5 ++echo "$as_me: creating $ofile" >&6;} ++ ++ cat <<__EOF__ >> "$cfgfile" ++#! $SHELL ++ ++# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. ++# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) ++# NOTE: Changes made to this file will be lost: look at ltmain.sh. ++# ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 ++# Free Software Foundation, Inc. ++# ++# This file is part of GNU Libtool: ++# Originally by Gordon Matzigkeit , 1996 ++# ++# This program is free software; you can redistribute it and/or modify ++# it under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 2 of the License, or ++# (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, but ++# WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++# General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++# ++# As a special exception to the GNU General Public License, if you ++# distribute this file as part of a program that contains a ++# configuration script generated by Autoconf, you may include it under ++# the same distribution terms that you use for the rest of that program. ++ ++# A sed program that does not truncate output. ++SED=$lt_SED ++ ++# Sed that helps us avoid accidentally triggering echo(1) options like -n. ++Xsed="$SED -e 1s/^X//" ++ ++# The HP-UX ksh and POSIX shell print the target directory to stdout ++# if CDPATH is set. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++ ++# The names of the tagged configurations supported by this script. ++available_tags= ++ ++# ### BEGIN LIBTOOL CONFIG ++ ++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: ++ ++# Shell to use when invoking shell scripts. ++SHELL=$lt_SHELL ++ ++# Whether or not to build shared libraries. ++build_libtool_libs=$enable_shared ++ ++# Whether or not to build static libraries. ++build_old_libs=$enable_static ++ ++# Whether or not to add -lc for building shared libraries. ++build_libtool_need_lc=$archive_cmds_need_lc ++ ++# Whether or not to disallow shared libs when runtime libs are static ++allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes ++ ++# Whether or not to optimize for fast installation. ++fast_install=$enable_fast_install ++ ++# The host system. ++host_alias=$host_alias ++host=$host ++host_os=$host_os ++ ++# The build system. ++build_alias=$build_alias ++build=$build ++build_os=$build_os ++ ++# An echo program that does not interpret backslashes. ++echo=$lt_echo ++ ++# The archiver. ++AR=$lt_AR ++AR_FLAGS=$lt_AR_FLAGS ++ ++# A C compiler. ++LTCC=$lt_LTCC ++ ++# LTCC compiler flags. ++LTCFLAGS=$lt_LTCFLAGS ++ ++# A language-specific compiler. ++CC=$lt_compiler ++ ++# Is the compiler the GNU C compiler? ++with_gcc=$GCC ++ ++# An ERE matcher. ++EGREP=$lt_EGREP ++ ++# The linker used to build libraries. ++LD=$lt_LD ++ ++# Whether we need hard or soft links. ++LN_S=$lt_LN_S ++ ++# A BSD-compatible nm program. ++NM=$lt_NM ++ ++# A symbol stripping program ++STRIP=$lt_STRIP ++ ++# Used to examine libraries when file_magic_cmd begins "file" ++MAGIC_CMD=$MAGIC_CMD ++ ++# Used on cygwin: DLL creation program. ++DLLTOOL="$DLLTOOL" ++ ++# Used on cygwin: object dumper. ++OBJDUMP="$OBJDUMP" ++ ++# Used on cygwin: assembler. ++AS="$AS" ++ ++# The name of the directory that contains temporary libtool files. ++objdir=$objdir ++ ++# How to create reloadable object files. ++reload_flag=$lt_reload_flag ++reload_cmds=$lt_reload_cmds ++ ++# How to pass a linker flag through the compiler. ++wl=$lt_lt_prog_compiler_wl ++ ++# Object file suffix (normally "o"). ++objext="$ac_objext" ++ ++# Old archive suffix (normally "a"). ++libext="$libext" ++ ++# Shared library suffix (normally ".so"). ++shrext_cmds='$shrext_cmds' ++ ++# Executable file suffix (normally ""). ++exeext="$exeext" ++ ++# Additional compiler flags for building library objects. ++pic_flag=$lt_lt_prog_compiler_pic ++pic_mode=$pic_mode ++ ++# What is the maximum length of a command? ++max_cmd_len=$lt_cv_sys_max_cmd_len ++ ++# Does compiler simultaneously support -c and -o options? ++compiler_c_o=$lt_lt_cv_prog_compiler_c_o ++ ++# Must we lock files when doing compilation? ++need_locks=$lt_need_locks ++ ++# Do we need the lib prefix for modules? ++need_lib_prefix=$need_lib_prefix ++ ++# Do we need a version for libraries? ++need_version=$need_version ++ ++# Whether dlopen is supported. ++dlopen_support=$enable_dlopen ++ ++# Whether dlopen of programs is supported. ++dlopen_self=$enable_dlopen_self ++ ++# Whether dlopen of statically linked programs is supported. ++dlopen_self_static=$enable_dlopen_self_static ++ ++# Compiler flag to prevent dynamic linking. ++link_static_flag=$lt_lt_prog_compiler_static ++ ++# Compiler flag to turn off builtin functions. ++no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag ++ ++# Compiler flag to allow reflexive dlopens. ++export_dynamic_flag_spec=$lt_export_dynamic_flag_spec ++ ++# Compiler flag to generate shared objects directly from archives. ++whole_archive_flag_spec=$lt_whole_archive_flag_spec ++ ++# Compiler flag to generate thread-safe objects. ++thread_safe_flag_spec=$lt_thread_safe_flag_spec ++ ++# Library versioning type. ++version_type=$version_type ++ ++# Format of library name prefix. ++libname_spec=$lt_libname_spec ++ ++# List of archive names. First name is the real one, the rest are links. ++# The last name is the one that the linker finds with -lNAME. ++library_names_spec=$lt_library_names_spec ++ ++# The coded name of the library, if different from the real name. ++soname_spec=$lt_soname_spec ++ ++# Commands used to build and install an old-style archive. ++RANLIB=$lt_RANLIB ++old_archive_cmds=$lt_old_archive_cmds ++old_postinstall_cmds=$lt_old_postinstall_cmds ++old_postuninstall_cmds=$lt_old_postuninstall_cmds ++ ++# Create an old-style archive from a shared archive. ++old_archive_from_new_cmds=$lt_old_archive_from_new_cmds ++ ++# Create a temporary old-style archive to link instead of a shared archive. ++old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds ++ ++# Commands used to build and install a shared archive. ++archive_cmds=$lt_archive_cmds ++archive_expsym_cmds=$lt_archive_expsym_cmds ++postinstall_cmds=$lt_postinstall_cmds ++postuninstall_cmds=$lt_postuninstall_cmds ++ ++# Commands used to build a loadable module (assumed same as above if empty) ++module_cmds=$lt_module_cmds ++module_expsym_cmds=$lt_module_expsym_cmds ++ ++# Commands to strip libraries. ++old_striplib=$lt_old_striplib ++striplib=$lt_striplib ++ ++# Dependencies to place before the objects being linked to create a ++# shared library. ++predep_objects=$lt_predep_objects ++ ++# Dependencies to place after the objects being linked to create a ++# shared library. ++postdep_objects=$lt_postdep_objects ++ ++# Dependencies to place before the objects being linked to create a ++# shared library. ++predeps=$lt_predeps ++ ++# Dependencies to place after the objects being linked to create a ++# shared library. ++postdeps=$lt_postdeps ++ ++# The library search path used internally by the compiler when linking ++# a shared library. ++compiler_lib_search_path=$lt_compiler_lib_search_path ++ ++# Method to check whether dependent libraries are shared objects. ++deplibs_check_method=$lt_deplibs_check_method ++ ++# Command to use when deplibs_check_method == file_magic. ++file_magic_cmd=$lt_file_magic_cmd ++ ++# Flag that allows shared libraries with undefined symbols to be built. ++allow_undefined_flag=$lt_allow_undefined_flag ++ ++# Flag that forces no undefined symbols. ++no_undefined_flag=$lt_no_undefined_flag ++ ++# Commands used to finish a libtool library installation in a directory. ++finish_cmds=$lt_finish_cmds ++ ++# Same as above, but a single script fragment to be evaled but not shown. ++finish_eval=$lt_finish_eval ++ ++# Take the output of nm and produce a listing of raw symbols and C names. ++global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe ++ ++# Transform the output of nm in a proper C declaration ++global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl ++ ++# Transform the output of nm in a C name address pair ++global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address ++ ++# This is the shared library runtime path variable. ++runpath_var=$runpath_var ++ ++# This is the shared library path variable. ++shlibpath_var=$shlibpath_var ++ ++# Is shlibpath searched before the hard-coded library search path? ++shlibpath_overrides_runpath=$shlibpath_overrides_runpath ++ ++# How to hardcode a shared library path into an executable. ++hardcode_action=$hardcode_action ++ ++# Whether we should hardcode library paths into libraries. ++hardcode_into_libs=$hardcode_into_libs ++ ++# Flag to hardcode \$libdir into a binary during linking. ++# This must work even if \$libdir does not exist. ++hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec ++ ++# If ld is used when linking, flag to hardcode \$libdir into ++# a binary during linking. This must work even if \$libdir does ++# not exist. ++hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld ++ ++# Whether we need a single -rpath flag with a separated argument. ++hardcode_libdir_separator=$lt_hardcode_libdir_separator ++ ++# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the ++# resulting binary. ++hardcode_direct=$hardcode_direct ++ ++# Set to yes if using the -LDIR flag during linking hardcodes DIR into the ++# resulting binary. ++hardcode_minus_L=$hardcode_minus_L ++ ++# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into ++# the resulting binary. ++hardcode_shlibpath_var=$hardcode_shlibpath_var ++ ++# Set to yes if building a shared library automatically hardcodes DIR into the library ++# and all subsequent libraries and executables linked against it. ++hardcode_automatic=$hardcode_automatic ++ ++# Variables whose values should be saved in libtool wrapper scripts and ++# restored at relink time. ++variables_saved_for_relink="$variables_saved_for_relink" ++ ++# Whether libtool must link a program against all its dependency libraries. ++link_all_deplibs=$link_all_deplibs ++ ++# Compile-time system search path for libraries ++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec ++ ++# Run-time system search path for libraries ++sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec ++ ++# Fix the shell variable \$srcfile for the compiler. ++fix_srcfile_path="$fix_srcfile_path" ++ ++# Set to yes if exported symbols are required. ++always_export_symbols=$always_export_symbols ++ ++# The commands to list exported symbols. ++export_symbols_cmds=$lt_export_symbols_cmds ++ ++# The commands to extract the exported symbol list from a shared archive. ++extract_expsyms_cmds=$lt_extract_expsyms_cmds ++ ++# Symbols that should not be listed in the preloaded symbols. ++exclude_expsyms=$lt_exclude_expsyms ++ ++# Symbols that must always be exported. ++include_expsyms=$lt_include_expsyms ++ ++# ### END LIBTOOL CONFIG ++ ++__EOF__ ++ ++ ++ case $host_os in ++ aix3*) ++ cat <<\EOF >> "$cfgfile" ++ ++# AIX sometimes has problems with the GCC collect2 program. For some ++# reason, if we set the COLLECT_NAMES environment variable, the problems ++# vanish in a puff of smoke. ++if test "X${COLLECT_NAMES+set}" != Xset; then ++ COLLECT_NAMES= ++ export COLLECT_NAMES ++fi ++EOF ++ ;; ++ esac ++ ++ # We use sed instead of cat because bash on DJGPP gets confused if ++ # if finds mixed CR/LF and LF-only lines. Since sed operates in ++ # text mode, it properly converts lines to CR/LF. This bash problem ++ # is reportedly fixed, but why not run on old versions too? ++ sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) ++ ++ mv -f "$cfgfile" "$ofile" || \ ++ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") ++ chmod +x "$ofile" ++ ++else ++ # If there is no Makefile yet, we rely on a make rule to execute ++ # `config.status --recheck' to rerun these tests and create the ++ # libtool script then. ++ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` ++ if test -f "$ltmain_in"; then ++ test -f Makefile && make "$ltmain" ++ fi ++fi ++ ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++CC="$lt_save_CC" ++ ++ ++# Check whether --with-tags or --without-tags was given. ++if test "${with_tags+set}" = set; then ++ withval="$with_tags" ++ tagnames="$withval" ++fi; ++ ++if test -f "$ltmain" && test -n "$tagnames"; then ++ if test ! -f "${ofile}"; then ++ { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5 ++echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;} ++ fi ++ ++ if test -z "$LTCC"; then ++ eval "`$SHELL ${ofile} --config | grep '^LTCC='`" ++ if test -z "$LTCC"; then ++ { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5 ++echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;} ++ else ++ { echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5 ++echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;} ++ fi ++ fi ++ if test -z "$LTCFLAGS"; then ++ eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`" ++ fi ++ ++ # Extract list of available tagged configurations in $ofile. ++ # Note that this assumes the entire list is on one line. ++ available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` ++ ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for tagname in $tagnames; do ++ IFS="$lt_save_ifs" ++ # Check whether tagname contains only valid characters ++ case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in ++ "") ;; ++ *) { { echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5 ++echo "$as_me: error: invalid tag name: $tagname" >&2;} ++ { (exit 1); exit 1; }; } ++ ;; ++ esac ++ ++ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null ++ then ++ { { echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5 ++echo "$as_me: error: tag name \"$tagname\" already exists" >&2;} ++ { (exit 1); exit 1; }; } ++ fi ++ ++ # Update the list of available tags. ++ if test -n "$tagname"; then ++ echo appending configuration tag \"$tagname\" to $ofile ++ ++ case $tagname in ++ CXX) ++ if test -n "$CXX" && ( test "X$CXX" != "Xno" && ++ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || ++ (test "X$CXX" != "Xg++"))) ; then ++ ac_ext=cc ++ac_cpp='$CXXCPP $CPPFLAGS' ++ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_cxx_compiler_gnu ++ ++ ++ ++ ++archive_cmds_need_lc_CXX=no ++allow_undefined_flag_CXX= ++always_export_symbols_CXX=no ++archive_expsym_cmds_CXX= ++export_dynamic_flag_spec_CXX= ++hardcode_direct_CXX=no ++hardcode_libdir_flag_spec_CXX= ++hardcode_libdir_flag_spec_ld_CXX= ++hardcode_libdir_separator_CXX= ++hardcode_minus_L_CXX=no ++hardcode_shlibpath_var_CXX=unsupported ++hardcode_automatic_CXX=no ++module_cmds_CXX= ++module_expsym_cmds_CXX= ++link_all_deplibs_CXX=unknown ++old_archive_cmds_CXX=$old_archive_cmds ++no_undefined_flag_CXX= ++whole_archive_flag_spec_CXX= ++enable_shared_with_static_runtimes_CXX=no ++ ++# Dependencies to place before and after the object being linked: ++predep_objects_CXX= ++postdep_objects_CXX= ++predeps_CXX= ++postdeps_CXX= ++compiler_lib_search_path_CXX= ++ ++# Source file extension for C++ test sources. ++ac_ext=cpp ++ ++# Object file extension for compiled C++ test sources. ++objext=o ++objext_CXX=$objext ++ ++# Code to be used in simple compile tests ++lt_simple_compile_test_code="int some_variable = 0;\n" ++ ++# Code to be used in simple link tests ++lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n' ++ ++# ltmain only uses $CC for tagged configurations so make sure $CC is set. ++ ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} ++ ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++ ++# Allow CC to be a program name with arguments. ++compiler=$CC ++ ++ ++# save warnings/boilerplate of simple test code ++ac_outfile=conftest.$ac_objext ++printf "$lt_simple_compile_test_code" >conftest.$ac_ext ++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_compiler_boilerplate=`cat conftest.err` ++$rm conftest* ++ ++ac_outfile=conftest.$ac_objext ++printf "$lt_simple_link_test_code" >conftest.$ac_ext ++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_linker_boilerplate=`cat conftest.err` ++$rm conftest* ++ ++ ++# Allow CC to be a program name with arguments. ++lt_save_CC=$CC ++lt_save_LD=$LD ++lt_save_GCC=$GCC ++GCC=$GXX ++lt_save_with_gnu_ld=$with_gnu_ld ++lt_save_path_LD=$lt_cv_path_LD ++if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then ++ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx ++else ++ $as_unset lt_cv_prog_gnu_ld ++fi ++if test -n "${lt_cv_path_LDCXX+set}"; then ++ lt_cv_path_LD=$lt_cv_path_LDCXX ++else ++ $as_unset lt_cv_path_LD ++fi ++test -z "${LDCXX+set}" || LD=$LDCXX ++CC=${CXX-"c++"} ++compiler=$CC ++compiler_CXX=$CC ++for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++ ++ ++# We don't want -fno-exception wen compiling C++ code, so set the ++# no_builtin_flag separately ++if test "$GXX" = yes; then ++ lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin' ++else ++ lt_prog_compiler_no_builtin_flag_CXX= ++fi ++ ++if test "$GXX" = yes; then ++ # Set up default GNU C++ configuration ++ ++ ++# Check whether --with-gnu-ld or --without-gnu-ld was given. ++if test "${with_gnu_ld+set}" = set; then ++ withval="$with_gnu_ld" ++ test "$withval" = no || with_gnu_ld=yes ++else ++ with_gnu_ld=no ++fi; ++ac_prog=ld ++if test "$GCC" = yes; then ++ # Check if gcc -print-prog-name=ld gives a path. ++ echo "$as_me:$LINENO: checking for ld used by $CC" >&5 ++echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6 ++ case $host in ++ *-*-mingw*) ++ # gcc leaves a trailing carriage return which upsets mingw ++ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; ++ *) ++ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; ++ esac ++ case $ac_prog in ++ # Accept absolute paths. ++ [\\/]* | ?:[\\/]*) ++ re_direlt='/[^/][^/]*/\.\./' ++ # Canonicalize the pathname of ld ++ ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` ++ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ++ ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` ++ done ++ test -z "$LD" && LD="$ac_prog" ++ ;; ++ "") ++ # If it fails, then pretend we aren't using GCC. ++ ac_prog=ld ++ ;; ++ *) ++ # If it is relative, then search for the first ld in PATH. ++ with_gnu_ld=unknown ++ ;; ++ esac ++elif test "$with_gnu_ld" = yes; then ++ echo "$as_me:$LINENO: checking for GNU ld" >&5 ++echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 ++else ++ echo "$as_me:$LINENO: checking for non-GNU ld" >&5 ++echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 ++fi ++if test "${lt_cv_path_LD+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -z "$LD"; then ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then ++ lt_cv_path_LD="$ac_dir/$ac_prog" ++ # Check to see if the program is GNU ld. I'd rather use --version, ++ # but apparently some variants of GNU ld only accept -v. ++ # Break only if it was the GNU/non-GNU ld that we prefer. ++ case `"$lt_cv_path_LD" -v 2>&1 &5 ++echo "${ECHO_T}$LD" >&6 ++else ++ echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6 ++fi ++test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 ++echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} ++ { (exit 1); exit 1; }; } ++echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 ++echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 ++if test "${lt_cv_prog_gnu_ld+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ # I'd rather use --version here, but apparently some GNU lds only accept -v. ++case `$LD -v 2>&1 &5 ++echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 ++with_gnu_ld=$lt_cv_prog_gnu_ld ++ ++ ++ ++ # Check if GNU C++ uses GNU ld as the underlying linker, since the ++ # archiving commands below assume that GNU ld is being used. ++ if test "$with_gnu_ld" = yes; then ++ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ++ hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' ++ export_dynamic_flag_spec_CXX='${wl}--export-dynamic' ++ ++ # If archive_cmds runs LD, not CC, wlarc should be empty ++ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to ++ # investigate it a little bit more. (MM) ++ wlarc='${wl}' ++ ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ ++ grep 'no-whole-archive' > /dev/null; then ++ whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ whole_archive_flag_spec_CXX= ++ fi ++ else ++ with_gnu_ld=no ++ wlarc= ++ ++ # A generic and very simple default shared library creation ++ # command for GNU C++ for the case where it uses the native ++ # linker, instead of GNU ld. If possible, this setting should ++ # overridden to take advantage of the native linker features on ++ # the platform it is being used on. ++ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' ++ fi ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' ++ ++else ++ GXX=no ++ with_gnu_ld=no ++ wlarc= ++fi ++ ++# PORTME: fill in a description of your system's C++ link characteristics ++echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 ++ld_shlibs_CXX=yes ++case $host_os in ++ aix3*) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ aix4* | aix5*) ++ if test "$host_cpu" = ia64; then ++ # On IA64, the linker does run time linking by default, so we don't ++ # have to do anything special. ++ aix_use_runtimelinking=no ++ exp_sym_flag='-Bexport' ++ no_entry_flag="" ++ else ++ aix_use_runtimelinking=no ++ ++ # Test if we are trying to use run time linking or normal ++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we ++ # need to do runtime linking. ++ case $host_os in aix4.[23]|aix4.[23].*|aix5*) ++ for ld_flag in $LDFLAGS; do ++ case $ld_flag in ++ *-brtl*) ++ aix_use_runtimelinking=yes ++ break ++ ;; ++ esac ++ done ++ ;; ++ esac ++ ++ exp_sym_flag='-bexport' ++ no_entry_flag='-bnoentry' ++ fi ++ ++ # When large executables or shared objects are built, AIX ld can ++ # have problems creating the table of contents. If linking a library ++ # or program results in "error TOC overflow" add -mminimal-toc to ++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not ++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. ++ ++ archive_cmds_CXX='' ++ hardcode_direct_CXX=yes ++ hardcode_libdir_separator_CXX=':' ++ link_all_deplibs_CXX=yes ++ ++ if test "$GXX" = yes; then ++ case $host_os in aix4.[012]|aix4.[012].*) ++ # We only want to do this on AIX 4.2 and lower, the check ++ # below for broken collect2 doesn't work under 4.3+ ++ collect2name=`${CC} -print-prog-name=collect2` ++ if test -f "$collect2name" && \ ++ strings "$collect2name" | grep resolve_lib_name >/dev/null ++ then ++ # We have reworked collect2 ++ hardcode_direct_CXX=yes ++ else ++ # We have old collect2 ++ hardcode_direct_CXX=unsupported ++ # It fails to find uninstalled libraries when the uninstalled ++ # path is not listed in the libpath. Setting hardcode_minus_L ++ # to unsupported forces relinking ++ hardcode_minus_L_CXX=yes ++ hardcode_libdir_flag_spec_CXX='-L$libdir' ++ hardcode_libdir_separator_CXX= ++ fi ++ ;; ++ esac ++ shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi ++ else ++ # not using gcc ++ if test "$host_cpu" = ia64; then ++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release ++ # chokes on -Wl,-G. The following line is correct: ++ shared_flag='-G' ++ else ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag='${wl}-G' ++ else ++ shared_flag='${wl}-bM:SRE' ++ fi ++ fi ++ fi ++ ++ # It seems that -bexpall does not export symbols beginning with ++ # underscore (_), so it is better to generate a list of symbols to export. ++ always_export_symbols_CXX=yes ++ if test "$aix_use_runtimelinking" = yes; then ++ # Warning - without using the other runtime loading flags (-brtl), ++ # -berok will link without error, but may produce a broken library. ++ allow_undefined_flag_CXX='-berok' ++ # Determine the default libpath from the value encoded in an empty executable. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'`; fi ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++fi ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ ++ hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" ++ ++ archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ else ++ if test "$host_cpu" = ia64; then ++ hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' ++ allow_undefined_flag_CXX="-z nodefs" ++ archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" ++ else ++ # Determine the default libpath from the value encoded in an empty executable. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'`; fi ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++fi ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ ++ hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" ++ # Warning - without using the other run time loading flags, ++ # -berok will link without error, but may produce a broken library. ++ no_undefined_flag_CXX=' ${wl}-bernotok' ++ allow_undefined_flag_CXX=' ${wl}-berok' ++ # Exported symbols can be pulled into shared objects from archives ++ whole_archive_flag_spec_CXX='$convenience' ++ archive_cmds_need_lc_CXX=yes ++ # This is similar to how AIX traditionally builds its shared libraries. ++ archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ fi ++ fi ++ ;; ++ ++ beos*) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ allow_undefined_flag_CXX=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ else ++ ld_shlibs_CXX=no ++ fi ++ ;; ++ ++ chorus*) ++ case $cc_basename in ++ *) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ esac ++ ;; ++ ++ cygwin* | mingw* | pw32*) ++ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, ++ # as there is no search path for DLLs. ++ hardcode_libdir_flag_spec_CXX='-L$libdir' ++ allow_undefined_flag_CXX=unsupported ++ always_export_symbols_CXX=no ++ enable_shared_with_static_runtimes_CXX=yes ++ ++ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then ++ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ # If the export-symbols file already is a .def file (1st line ++ # is EXPORTS), use it as is; otherwise, prepend... ++ archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ cp $export_symbols $output_objdir/$soname.def; ++ else ++ echo EXPORTS > $output_objdir/$soname.def; ++ cat $export_symbols >> $output_objdir/$soname.def; ++ fi~ ++ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ ld_shlibs_CXX=no ++ fi ++ ;; ++ darwin* | rhapsody*) ++ case $host_os in ++ rhapsody* | darwin1.[012]) ++ allow_undefined_flag_CXX='${wl}-undefined ${wl}suppress' ++ ;; ++ *) # Darwin 1.3 on ++ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then ++ allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ else ++ case ${MACOSX_DEPLOYMENT_TARGET} in ++ 10.[012]) ++ allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ ;; ++ 10.*) ++ allow_undefined_flag_CXX='${wl}-undefined ${wl}dynamic_lookup' ++ ;; ++ esac ++ fi ++ ;; ++ esac ++ archive_cmds_need_lc_CXX=no ++ hardcode_direct_CXX=no ++ hardcode_automatic_CXX=yes ++ hardcode_shlibpath_var_CXX=unsupported ++ whole_archive_flag_spec_CXX='' ++ link_all_deplibs_CXX=yes ++ ++ if test "$GXX" = yes ; then ++ lt_int_apple_cc_single_mod=no ++ output_verbose_link_cmd='echo' ++ if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then ++ lt_int_apple_cc_single_mod=yes ++ fi ++ if test "X$lt_int_apple_cc_single_mod" = Xyes ; then ++ archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' ++ else ++ archive_cmds_CXX='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' ++ fi ++ module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ if test "X$lt_int_apple_cc_single_mod" = Xyes ; then ++ archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ else ++ archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ fi ++ module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ else ++ case $cc_basename in ++ xlc*) ++ output_verbose_link_cmd='echo' ++ archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' ++ module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ ;; ++ *) ++ ld_shlibs_CXX=no ++ ;; ++ esac ++ fi ++ ;; ++ ++ dgux*) ++ case $cc_basename in ++ ec++*) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ ghcx*) ++ # Green Hills C++ Compiler ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ esac ++ ;; ++ freebsd[12]*) ++ # C++ shared libraries reported to be fairly broken before switch to ELF ++ ld_shlibs_CXX=no ++ ;; ++ freebsd-elf*) ++ archive_cmds_need_lc_CXX=no ++ ;; ++ freebsd* | dragonfly*) ++ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF ++ # conventions ++ ld_shlibs_CXX=yes ++ ;; ++ gnu*) ++ ;; ++ hpux9*) ++ hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator_CXX=: ++ export_dynamic_flag_spec_CXX='${wl}-E' ++ hardcode_direct_CXX=yes ++ hardcode_minus_L_CXX=yes # Not in the search PATH, ++ # but as the default ++ # location of the library. ++ ++ case $cc_basename in ++ CC*) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ aCC*) ++ archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ++ ;; ++ *) ++ if test "$GXX" = yes; then ++ archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ else ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ fi ++ ;; ++ esac ++ ;; ++ hpux10*|hpux11*) ++ if test $with_gnu_ld = no; then ++ hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator_CXX=: ++ ++ case $host_cpu in ++ hppa*64*|ia64*) ++ hardcode_libdir_flag_spec_ld_CXX='+b $libdir' ++ ;; ++ *) ++ export_dynamic_flag_spec_CXX='${wl}-E' ++ ;; ++ esac ++ fi ++ case $host_cpu in ++ hppa*64*|ia64*) ++ hardcode_direct_CXX=no ++ hardcode_shlibpath_var_CXX=no ++ ;; ++ *) ++ hardcode_direct_CXX=yes ++ hardcode_minus_L_CXX=yes # Not in the search PATH, ++ # but as the default ++ # location of the library. ++ ;; ++ esac ++ ++ case $cc_basename in ++ CC*) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ aCC*) ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ *) ++ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ esac ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ++ ;; ++ *) ++ if test "$GXX" = yes; then ++ if test $with_gnu_ld = no; then ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ *) ++ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ esac ++ fi ++ else ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ fi ++ ;; ++ esac ++ ;; ++ interix3*) ++ hardcode_direct_CXX=no ++ hardcode_shlibpath_var_CXX=no ++ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec_CXX='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; ++ irix5* | irix6*) ++ case $cc_basename in ++ CC*) ++ # SGI C++ ++ archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ ++ # Archives containing C++ object files must be created using ++ # "CC -ar", where "CC" is the IRIX C++ compiler. This is ++ # necessary to make sure instantiated templates are included ++ # in the archive. ++ old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs' ++ ;; ++ *) ++ if test "$GXX" = yes; then ++ if test "$with_gnu_ld" = no; then ++ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' ++ fi ++ fi ++ link_all_deplibs_CXX=yes ++ ;; ++ esac ++ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator_CXX=: ++ ;; ++ linux* | k*bsd*-gnu) ++ case $cc_basename in ++ KCC*) ++ # Kuck and Associates, Inc. (KAI) C++ Compiler ++ ++ # KCC will only create a shared library if the output file ++ # ends with ".so" (or ".sl" for HP-UX), so rename the library ++ # to its proper name (with version) after linking. ++ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' ++ archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ++ ++ hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir' ++ export_dynamic_flag_spec_CXX='${wl}--export-dynamic' ++ ++ # Archives containing C++ object files must be created using ++ # "CC -Bstatic", where "CC" is the KAI C++ compiler. ++ old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ++ ;; ++ icpc*) ++ # Intel C++ ++ with_gnu_ld=yes ++ # version 8.0 and above of icpc choke on multiply defined symbols ++ # if we add $predep_objects and $postdep_objects, however 7.1 and ++ # earlier do not add the objects themselves. ++ case `$CC -V 2>&1` in ++ *"Version 7."*) ++ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ;; ++ *) # Version 8.0 or newer ++ tmp_idyn= ++ case $host_cpu in ++ ia64*) tmp_idyn=' -i_dynamic';; ++ esac ++ archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ;; ++ esac ++ archive_cmds_need_lc_CXX=no ++ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec_CXX='${wl}--export-dynamic' ++ whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ++ ;; ++ pgCC*) ++ # Portland Group C++ compiler ++ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' ++ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ++ ++ hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' ++ export_dynamic_flag_spec_CXX='${wl}--export-dynamic' ++ whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ ;; ++ cxx*) ++ # Compaq C++ ++ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' ++ ++ runpath_var=LD_RUN_PATH ++ hardcode_libdir_flag_spec_CXX='-rpath $libdir' ++ hardcode_libdir_separator_CXX=: ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ++ ;; ++ esac ++ ;; ++ lynxos*) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ m88k*) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ mvs*) ++ case $cc_basename in ++ cxx*) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ esac ++ ;; ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' ++ wlarc= ++ hardcode_libdir_flag_spec_CXX='-R$libdir' ++ hardcode_direct_CXX=yes ++ hardcode_shlibpath_var_CXX=no ++ fi ++ # Workaround some broken pre-1.5 toolchains ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ++ ;; ++ openbsd2*) ++ # C++ shared libraries are fairly broken ++ ld_shlibs_CXX=no ++ ;; ++ openbsd*) ++ hardcode_direct_CXX=yes ++ hardcode_shlibpath_var_CXX=no ++ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' ++ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' ++ export_dynamic_flag_spec_CXX='${wl}-E' ++ whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ fi ++ output_verbose_link_cmd='echo' ++ ;; ++ osf3*) ++ case $cc_basename in ++ KCC*) ++ # Kuck and Associates, Inc. (KAI) C++ Compiler ++ ++ # KCC will only create a shared library if the output file ++ # ends with ".so" (or ".sl" for HP-UX), so rename the library ++ # to its proper name (with version) after linking. ++ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' ++ ++ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' ++ hardcode_libdir_separator_CXX=: ++ ++ # Archives containing C++ object files must be created using ++ # "CC -Bstatic", where "CC" is the KAI C++ compiler. ++ old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ++ ++ ;; ++ RCC*) ++ # Rational C++ 2.4.1 ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ cxx*) ++ allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ ++ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator_CXX=: ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ++ ;; ++ *) ++ if test "$GXX" = yes && test "$with_gnu_ld" = no; then ++ allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ ++ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator_CXX=: ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' ++ ++ else ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ fi ++ ;; ++ esac ++ ;; ++ osf4* | osf5*) ++ case $cc_basename in ++ KCC*) ++ # Kuck and Associates, Inc. (KAI) C++ Compiler ++ ++ # KCC will only create a shared library if the output file ++ # ends with ".so" (or ".sl" for HP-UX), so rename the library ++ # to its proper name (with version) after linking. ++ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' ++ ++ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' ++ hardcode_libdir_separator_CXX=: ++ ++ # Archives containing C++ object files must be created using ++ # the KAI C++ compiler. ++ old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ++ ;; ++ RCC*) ++ # Rational C++ 2.4.1 ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ cxx*) ++ allow_undefined_flag_CXX=' -expect_unresolved \*' ++ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ ++ echo "-hidden">> $lib.exp~ ++ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ ++ $rm $lib.exp' ++ ++ hardcode_libdir_flag_spec_CXX='-rpath $libdir' ++ hardcode_libdir_separator_CXX=: ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ++ ;; ++ *) ++ if test "$GXX" = yes && test "$with_gnu_ld" = no; then ++ allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ ++ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator_CXX=: ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' ++ ++ else ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ fi ++ ;; ++ esac ++ ;; ++ psos*) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ sunos4*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.x ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ lcc*) ++ # Lucid ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ esac ++ ;; ++ solaris*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.2, 5.x and Centerline C++ ++ archive_cmds_need_lc_CXX=yes ++ no_undefined_flag_CXX=' -zdefs' ++ archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ ++ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' ++ ++ hardcode_libdir_flag_spec_CXX='-R$libdir' ++ hardcode_shlibpath_var_CXX=no ++ case $host_os in ++ solaris2.[0-5] | solaris2.[0-5].*) ;; ++ *) ++ # The C++ compiler is used as linker so we must use $wl ++ # flag to pass the commands to the underlying system ++ # linker. We must also pass each convience library through ++ # to the system linker between allextract/defaultextract. ++ # The C++ compiler will combine linker options so we ++ # cannot just pass the convience library names through ++ # without $wl. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ++ ;; ++ esac ++ link_all_deplibs_CXX=yes ++ ++ output_verbose_link_cmd='echo' ++ ++ # Archives containing C++ object files must be created using ++ # "CC -xar", where "CC" is the Sun C++ compiler. This is ++ # necessary to make sure instantiated templates are included ++ # in the archive. ++ old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' ++ ;; ++ gcx*) ++ # Green Hills C++ Compiler ++ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++ ++ # The C++ compiler must be used to create the archive. ++ old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ++ ;; ++ *) ++ # GNU C++ compiler with Solaris linker ++ if test "$GXX" = yes && test "$with_gnu_ld" = no; then ++ no_undefined_flag_CXX=' ${wl}-z ${wl}defs' ++ if $CC --version | grep -v '^2\.7' > /dev/null; then ++ archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++ archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ ++ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" ++ else ++ # g++ 2.7 appears to require `-G' NOT `-shared' on this ++ # platform. ++ archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++ archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ ++ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" ++ fi ++ ++ hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' ++ fi ++ ;; ++ esac ++ ;; ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) ++ no_undefined_flag_CXX='${wl}-z,text' ++ archive_cmds_need_lc_CXX=no ++ hardcode_shlibpath_var_CXX=no ++ runpath_var='LD_RUN_PATH' ++ ++ case $cc_basename in ++ CC*) ++ archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ ;; ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ # For security reasons, it is highly recommended that you always ++ # use absolute paths for naming shared libraries, and exclude the ++ # DT_RUNPATH tag from executables and libraries. But doing so ++ # requires that you compile everything twice, which is a pain. ++ # So that behaviour is only enabled if SCOABSPATH is set to a ++ # non-empty value in the environment. Most likely only useful for ++ # creating official distributions of packages. ++ # This is a hack until libtool officially supports absolute path ++ # names for shared libraries. ++ no_undefined_flag_CXX='${wl}-z,text' ++ allow_undefined_flag_CXX='${wl}-z,nodefs' ++ archive_cmds_need_lc_CXX=no ++ hardcode_shlibpath_var_CXX=no ++ hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' ++ hardcode_libdir_separator_CXX=':' ++ link_all_deplibs_CXX=yes ++ export_dynamic_flag_spec_CXX='${wl}-Bexport' ++ runpath_var='LD_RUN_PATH' ++ ++ case $cc_basename in ++ CC*) ++ archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ ;; ++ tandem*) ++ case $cc_basename in ++ NCC*) ++ # NonStop-UX NCC 3.20 ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ esac ++ ;; ++ vxworks*) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++esac ++echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 ++echo "${ECHO_T}$ld_shlibs_CXX" >&6 ++test "$ld_shlibs_CXX" = no && can_build_shared=no ++ ++GCC_CXX="$GXX" ++LD_CXX="$LD" ++ ++ ++cat > conftest.$ac_ext <&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ # Parse the compiler output and extract the necessary ++ # objects, libraries and library flags. ++ ++ # Sentinel used to keep track of whether or not we are before ++ # the conftest object file. ++ pre_test_object_deps_done=no ++ ++ # The `*' in the case matches for architectures that use `case' in ++ # $output_verbose_cmd can trigger glob expansion during the loop ++ # eval without this substitution. ++ output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"` ++ ++ for p in `eval $output_verbose_link_cmd`; do ++ case $p in ++ ++ -L* | -R* | -l*) ++ # Some compilers place space between "-{L,R}" and the path. ++ # Remove the space. ++ if test $p = "-L" \ ++ || test $p = "-R"; then ++ prev=$p ++ continue ++ else ++ prev= ++ fi ++ ++ if test "$pre_test_object_deps_done" = no; then ++ case $p in ++ -L* | -R*) ++ # Internal compiler library paths should come after those ++ # provided the user. The postdeps already come after the ++ # user supplied libs so there is no need to process them. ++ if test -z "$compiler_lib_search_path_CXX"; then ++ compiler_lib_search_path_CXX="${prev}${p}" ++ else ++ compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}" ++ fi ++ ;; ++ # The "-l" case would never come before the object being ++ # linked, so don't bother handling this case. ++ esac ++ else ++ if test -z "$postdeps_CXX"; then ++ postdeps_CXX="${prev}${p}" ++ else ++ postdeps_CXX="${postdeps_CXX} ${prev}${p}" ++ fi ++ fi ++ ;; ++ ++ *.$objext) ++ # This assumes that the test object file only shows up ++ # once in the compiler output. ++ if test "$p" = "conftest.$objext"; then ++ pre_test_object_deps_done=yes ++ continue ++ fi ++ ++ if test "$pre_test_object_deps_done" = no; then ++ if test -z "$predep_objects_CXX"; then ++ predep_objects_CXX="$p" ++ else ++ predep_objects_CXX="$predep_objects_CXX $p" ++ fi ++ else ++ if test -z "$postdep_objects_CXX"; then ++ postdep_objects_CXX="$p" ++ else ++ postdep_objects_CXX="$postdep_objects_CXX $p" ++ fi ++ fi ++ ;; ++ ++ *) ;; # Ignore the rest. ++ ++ esac ++ done ++ ++ # Clean up. ++ rm -f a.out a.exe ++else ++ echo "libtool.m4: error: problem compiling CXX test program" ++fi ++ ++$rm -f confest.$objext ++ ++# PORTME: override above test on systems where it is broken ++case $host_os in ++interix3*) ++ # Interix 3.5 installs completely hosed .la files for C++, so rather than ++ # hack all around it, let's just trust "g++" to DTRT. ++ predep_objects_CXX= ++ postdep_objects_CXX= ++ postdeps_CXX= ++ ;; ++ ++solaris*) ++ case $cc_basename in ++ CC*) ++ # Adding this requires a known-good setup of shared libraries for ++ # Sun compiler versions before 5.6, else PIC objects from an old ++ # archive will be linked into the output, leading to subtle bugs. ++ postdeps_CXX='-lCstd -lCrun' ++ ;; ++ esac ++ ;; ++esac ++ ++ ++case " $postdeps_CXX " in ++*" -lc "*) archive_cmds_need_lc_CXX=no ;; ++esac ++ ++lt_prog_compiler_wl_CXX= ++lt_prog_compiler_pic_CXX= ++lt_prog_compiler_static_CXX= ++ ++echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 ++ ++ # C++ specific cases for pic, static, wl, etc. ++ if test "$GXX" = yes; then ++ lt_prog_compiler_wl_CXX='-Wl,' ++ lt_prog_compiler_static_CXX='-static' ++ ++ case $host_os in ++ aix*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ lt_prog_compiler_static_CXX='-Bstatic' ++ fi ++ ;; ++ amigaos*) ++ # FIXME: we need at least 68020 code to build shared libraries, but ++ # adding the `-m68020' flag to GCC prevents building anything better, ++ # like `-m68040'. ++ lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' ++ ;; ++ beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ # PIC is the default for these OSes. ++ ;; ++ mingw* | os2* | pw32*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ lt_prog_compiler_pic_CXX='-DDLL_EXPORT' ++ ;; ++ darwin* | rhapsody*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ lt_prog_compiler_pic_CXX='-fno-common' ++ ;; ++ *djgpp*) ++ # DJGPP does not support shared libraries at all ++ lt_prog_compiler_pic_CXX= ++ ;; ++ interix3*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ lt_prog_compiler_pic_CXX=-Kconform_pic ++ fi ++ ;; ++ hpux*) ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ ;; ++ *) ++ lt_prog_compiler_pic_CXX='-fPIC' ++ ;; ++ esac ++ ;; ++ *) ++ lt_prog_compiler_pic_CXX='-fPIC' ++ ;; ++ esac ++ else ++ case $host_os in ++ aix4* | aix5*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ lt_prog_compiler_static_CXX='-Bstatic' ++ else ++ lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp' ++ fi ++ ;; ++ chorus*) ++ case $cc_basename in ++ cxch68*) ++ # Green Hills C++ Compiler ++ # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ++ ;; ++ esac ++ ;; ++ darwin*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ case $cc_basename in ++ xlc*) ++ lt_prog_compiler_pic_CXX='-qnocommon' ++ lt_prog_compiler_wl_CXX='-Wl,' ++ ;; ++ esac ++ ;; ++ dgux*) ++ case $cc_basename in ++ ec++*) ++ lt_prog_compiler_pic_CXX='-KPIC' ++ ;; ++ ghcx*) ++ # Green Hills C++ Compiler ++ lt_prog_compiler_pic_CXX='-pic' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ freebsd* | dragonfly*) ++ # FreeBSD uses GNU C++ ++ ;; ++ hpux9* | hpux10* | hpux11*) ++ case $cc_basename in ++ CC*) ++ lt_prog_compiler_wl_CXX='-Wl,' ++ lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' ++ if test "$host_cpu" != ia64; then ++ lt_prog_compiler_pic_CXX='+Z' ++ fi ++ ;; ++ aCC*) ++ lt_prog_compiler_wl_CXX='-Wl,' ++ lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ lt_prog_compiler_pic_CXX='+Z' ++ ;; ++ esac ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ interix*) ++ # This is c89, which is MS Visual C++ (no shared libs) ++ # Anyone wants to do a port? ++ ;; ++ irix5* | irix6* | nonstopux*) ++ case $cc_basename in ++ CC*) ++ lt_prog_compiler_wl_CXX='-Wl,' ++ lt_prog_compiler_static_CXX='-non_shared' ++ # CC pic flag -KPIC is the default. ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ linux* | k*bsd*-gnu) ++ case $cc_basename in ++ KCC*) ++ # KAI C++ Compiler ++ lt_prog_compiler_wl_CXX='--backend -Wl,' ++ lt_prog_compiler_pic_CXX='-fPIC' ++ ;; ++ icpc* | ecpc*) ++ # Intel C++ ++ lt_prog_compiler_wl_CXX='-Wl,' ++ lt_prog_compiler_pic_CXX='-KPIC' ++ lt_prog_compiler_static_CXX='-static' ++ ;; ++ pgCC*) ++ # Portland Group C++ compiler. ++ lt_prog_compiler_wl_CXX='-Wl,' ++ lt_prog_compiler_pic_CXX='-fpic' ++ lt_prog_compiler_static_CXX='-Bstatic' ++ ;; ++ cxx*) ++ # Compaq C++ ++ # Make sure the PIC flag is empty. It appears that all Alpha ++ # Linux and Compaq Tru64 Unix objects are PIC. ++ lt_prog_compiler_pic_CXX= ++ lt_prog_compiler_static_CXX='-non_shared' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ lynxos*) ++ ;; ++ m88k*) ++ ;; ++ mvs*) ++ case $cc_basename in ++ cxx*) ++ lt_prog_compiler_pic_CXX='-W c,exportall' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ netbsd* | netbsdelf*-gnu) ++ ;; ++ osf3* | osf4* | osf5*) ++ case $cc_basename in ++ KCC*) ++ lt_prog_compiler_wl_CXX='--backend -Wl,' ++ ;; ++ RCC*) ++ # Rational C++ 2.4.1 ++ lt_prog_compiler_pic_CXX='-pic' ++ ;; ++ cxx*) ++ # Digital/Compaq C++ ++ lt_prog_compiler_wl_CXX='-Wl,' ++ # Make sure the PIC flag is empty. It appears that all Alpha ++ # Linux and Compaq Tru64 Unix objects are PIC. ++ lt_prog_compiler_pic_CXX= ++ lt_prog_compiler_static_CXX='-non_shared' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ psos*) ++ ;; ++ solaris*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.2, 5.x and Centerline C++ ++ lt_prog_compiler_pic_CXX='-KPIC' ++ lt_prog_compiler_static_CXX='-Bstatic' ++ lt_prog_compiler_wl_CXX='-Qoption ld ' ++ ;; ++ gcx*) ++ # Green Hills C++ Compiler ++ lt_prog_compiler_pic_CXX='-PIC' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ sunos4*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.x ++ lt_prog_compiler_pic_CXX='-pic' ++ lt_prog_compiler_static_CXX='-Bstatic' ++ ;; ++ lcc*) ++ # Lucid ++ lt_prog_compiler_pic_CXX='-pic' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ tandem*) ++ case $cc_basename in ++ NCC*) ++ # NonStop-UX NCC 3.20 ++ lt_prog_compiler_pic_CXX='-KPIC' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ case $cc_basename in ++ CC*) ++ lt_prog_compiler_wl_CXX='-Wl,' ++ lt_prog_compiler_pic_CXX='-KPIC' ++ lt_prog_compiler_static_CXX='-Bstatic' ++ ;; ++ esac ++ ;; ++ vxworks*) ++ ;; ++ *) ++ lt_prog_compiler_can_build_shared_CXX=no ++ ;; ++ esac ++ fi ++ ++echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6 ++ ++# ++# Check to make sure the PIC flag actually works. ++# ++if test -n "$lt_prog_compiler_pic_CXX"; then ++ ++echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6 ++if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_prog_compiler_pic_works_CXX=no ++ ac_outfile=conftest.$ac_objext ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:11444: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&5 ++ echo "$as_me:11448: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ lt_prog_compiler_pic_works_CXX=yes ++ fi ++ fi ++ $rm conftest* ++ ++fi ++echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6 ++ ++if test x"$lt_prog_compiler_pic_works_CXX" = xyes; then ++ case $lt_prog_compiler_pic_CXX in ++ "" | " "*) ;; ++ *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; ++ esac ++else ++ lt_prog_compiler_pic_CXX= ++ lt_prog_compiler_can_build_shared_CXX=no ++fi ++ ++fi ++case $host_os in ++ # For platforms which do not support PIC, -DPIC is meaningless: ++ *djgpp*) ++ lt_prog_compiler_pic_CXX= ++ ;; ++ *) ++ lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" ++ ;; ++esac ++ ++# ++# Check to make sure the static flag actually works. ++# ++wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\" ++echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6 ++if test "${lt_prog_compiler_static_works_CXX+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_prog_compiler_static_works_CXX=no ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS $lt_tmp_static_flag" ++ printf "$lt_simple_link_test_code" > conftest.$ac_ext ++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then ++ # The linker can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ if test -s conftest.err; then ++ # Append any errors to the config.log. ++ cat conftest.err 1>&5 ++ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if diff conftest.exp conftest.er2 >/dev/null; then ++ lt_prog_compiler_static_works_CXX=yes ++ fi ++ else ++ lt_prog_compiler_static_works_CXX=yes ++ fi ++ fi ++ $rm conftest* ++ LDFLAGS="$save_LDFLAGS" ++ ++fi ++echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_CXX" >&5 ++echo "${ECHO_T}$lt_prog_compiler_static_works_CXX" >&6 ++ ++if test x"$lt_prog_compiler_static_works_CXX" = xyes; then ++ : ++else ++ lt_prog_compiler_static_CXX= ++fi ++ ++ ++echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 ++if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_c_o_CXX=no ++ $rm -r conftest 2>/dev/null ++ mkdir conftest ++ cd conftest ++ mkdir out ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ lt_compiler_flag="-o out/conftest2.$ac_objext" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:11548: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>out/conftest.err) ++ ac_status=$? ++ cat out/conftest.err >&5 ++ echo "$as_me:11552: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s out/conftest2.$ac_objext ++ then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_c_o_CXX=yes ++ fi ++ fi ++ chmod u+w . 2>&5 ++ $rm conftest* ++ # SGI C++ compiler will create directory out/ii_files/ for ++ # template instantiation ++ test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files ++ $rm out/* && rmdir out ++ cd .. ++ rmdir conftest ++ $rm conftest* ++ ++fi ++echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6 ++ ++ ++hard_links="nottested" ++if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then ++ # do not overwrite the value of need_locks provided by the user ++ echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 ++ hard_links=yes ++ $rm conftest* ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ touch conftest.a ++ ln conftest.a conftest.b 2>&5 || hard_links=no ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ echo "$as_me:$LINENO: result: $hard_links" >&5 ++echo "${ECHO_T}$hard_links" >&6 ++ if test "$hard_links" = no; then ++ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 ++echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} ++ need_locks=warn ++ fi ++else ++ need_locks=no ++fi ++ ++echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 ++ ++ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ case $host_os in ++ aix4* | aix5*) ++ # If we're using GNU nm, then we don't want the "-C" option. ++ # -C means demangle to AIX nm, but means don't demangle with GNU nm ++ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then ++ export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' ++ else ++ export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' ++ fi ++ ;; ++ pw32*) ++ export_symbols_cmds_CXX="$ltdll_cmds" ++ ;; ++ cygwin* | mingw*) ++ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([^ ]*\) [^ ]*/\1 DATA/;/^I /d;/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' ++ ;; ++ linux* | k*bsd*-gnu) ++ link_all_deplibs_CXX=no ++ ;; ++ *) ++ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ ;; ++ esac ++ ++echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 ++echo "${ECHO_T}$ld_shlibs_CXX" >&6 ++test "$ld_shlibs_CXX" = no && can_build_shared=no ++ ++# ++# Do we need to explicitly link libc? ++# ++case "x$archive_cmds_need_lc_CXX" in ++x|xyes) ++ # Assume -lc should be added ++ archive_cmds_need_lc_CXX=yes ++ ++ if test "$enable_shared" = yes && test "$GCC" = yes; then ++ case $archive_cmds_CXX in ++ *'~'*) ++ # FIXME: we may have to deal with multi-command sequences. ++ ;; ++ '$CC '*) ++ # Test whether the compiler implicitly links with -lc since on some ++ # systems, -lgcc has to come before -lc. If gcc already passes -lc ++ # to ld, don't add -lc before -lgcc. ++ echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 ++ $rm conftest* ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } 2>conftest.err; then ++ soname=conftest ++ lib=conftest ++ libobjs=conftest.$ac_objext ++ deplibs= ++ wl=$lt_prog_compiler_wl_CXX ++ pic_flag=$lt_prog_compiler_pic_CXX ++ compiler_flags=-v ++ linker_flags=-v ++ verstring= ++ output_objdir=. ++ libname=conftest ++ lt_save_allow_undefined_flag=$allow_undefined_flag_CXX ++ allow_undefined_flag_CXX= ++ if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 ++ (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++ then ++ archive_cmds_need_lc_CXX=no ++ else ++ archive_cmds_need_lc_CXX=yes ++ fi ++ allow_undefined_flag_CXX=$lt_save_allow_undefined_flag ++ else ++ cat conftest.err 1>&5 ++ fi ++ $rm conftest* ++ echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5 ++echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6 ++ ;; ++ esac ++ fi ++ ;; ++esac ++ ++echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 ++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 ++library_names_spec= ++libname_spec='lib$name' ++soname_spec= ++shrext_cmds=".so" ++postinstall_cmds= ++postuninstall_cmds= ++finish_cmds= ++finish_eval= ++shlibpath_var= ++shlibpath_overrides_runpath=unknown ++version_type=none ++dynamic_linker="$host_os ld.so" ++sys_lib_dlsearch_path_spec="/lib /usr/lib" ++if test "$GCC" = yes; then ++ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then ++ # if the path contains ";" then we assume it to be the separator ++ # otherwise default to the standard path separator (i.e. ":") - it is ++ # assumed that no part of a normal pathname contains ";" but that should ++ # okay in the real world where ";" in dirpaths is itself problematic. ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++else ++ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" ++fi ++need_lib_prefix=unknown ++hardcode_into_libs=no ++ ++# when you set need_version to no, make sure it does not cause -set_version ++# flags to be left without arguments ++need_version=unknown ++ ++case $host_os in ++aix3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' ++ shlibpath_var=LIBPATH ++ ++ # AIX 3 has no versioning support, so we append a major version to the name. ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; ++ ++aix4* | aix5*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ hardcode_into_libs=yes ++ if test "$host_cpu" = ia64; then ++ # AIX 5 supports IA64 ++ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ else ++ # With GCC up to 2.95.x, collect2 would create an import file ++ # for dependence libraries. The import file would start with ++ # the line `#! .'. This would cause the generated library to ++ # depend on `.', always an invalid library. This was fixed in ++ # development snapshots of GCC prior to 3.0. ++ case $host_os in ++ aix4 | aix4.[01] | aix4.[01].*) ++ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' ++ echo ' yes ' ++ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then ++ : ++ else ++ can_build_shared=no ++ fi ++ ;; ++ esac ++ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct ++ # soname into executable. Probably we can add versioning support to ++ # collect2, so additional links can be useful in future. ++ if test "$aix_use_runtimelinking" = yes; then ++ # If using run time linking (on AIX 4.2 or later) use lib.so ++ # instead of lib.a to let people know that these are not ++ # typical AIX shared libraries. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ else ++ # We preserve .a as extension for shared libraries through AIX4.2 ++ # and later when we are not doing run time linking. ++ library_names_spec='${libname}${release}.a $libname.a' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ fi ++ shlibpath_var=LIBPATH ++ fi ++ ;; ++ ++amigaos*) ++ library_names_spec='$libname.ixlibrary $libname.a' ++ # Create ${libname}_ixlibrary.a entries in /sys/libs. ++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ++ ;; ++ ++beos*) ++ library_names_spec='${libname}${shared_ext}' ++ dynamic_linker="$host_os ld.so" ++ shlibpath_var=LIBRARY_PATH ++ ;; ++ ++bsdi[45]*) ++ version_type=linux ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" ++ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" ++ # the default ld.so.conf also contains /usr/contrib/lib and ++ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow ++ # libtool to hard-code these into programs ++ ;; ++ ++cygwin* | mingw* | pw32*) ++ version_type=windows ++ shrext_cmds=".dll" ++ need_version=no ++ need_lib_prefix=no ++ ++ case $GCC,$host_os in ++ yes,cygwin* | yes,mingw* | yes,pw32*) ++ library_names_spec='$libname.dll.a' ++ # DLL is installed to $(libdir)/../bin by postinstall_cmds ++ postinstall_cmds='base_file=`basename \${file}`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ ++ dldir=$destdir/`dirname \$dlpath`~ ++ test -d \$dldir || mkdir -p \$dldir~ ++ $install_prog $dir/$dlname \$dldir/$dlname~ ++ chmod a+x \$dldir/$dlname' ++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ ++ dlpath=$dir/\$dldll~ ++ $rm \$dlpath' ++ shlibpath_overrides_runpath=yes ++ ++ case $host_os in ++ cygwin*) ++ # Cygwin DLLs use 'cyg' prefix rather than 'lib' ++ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ++ ;; ++ mingw*) ++ # MinGW DLLs use traditional 'lib' prefix ++ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then ++ # It is most probably a Windows format PATH printed by ++ # mingw gcc, but we are running on Cygwin. Gcc prints its search ++ # path with ; separators, and with drive letters. We can handle the ++ # drive letters (cygwin fileutils understands them), so leave them, ++ # especially as we might pass files found there to a mingw objdump, ++ # which wouldn't understand a cygwinified path. Ahh. ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ ;; ++ pw32*) ++ # pw32 DLLs use 'pw' prefix rather than 'lib' ++ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ ;; ++ esac ++ ;; ++ ++ *) ++ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ++ ;; ++ esac ++ dynamic_linker='Win32 ld.exe' ++ # FIXME: first we should search . and the directory the executable is in ++ shlibpath_var=PATH ++ ;; ++ ++darwin* | rhapsody*) ++ dynamic_linker="$host_os dyld" ++ version_type=darwin ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' ++ soname_spec='${libname}${release}${major}$shared_ext' ++ shlibpath_overrides_runpath=yes ++ shlibpath_var=DYLD_LIBRARY_PATH ++ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' ++ # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. ++ if test "$GCC" = yes; then ++ sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` ++ else ++ sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' ++ fi ++ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ++ ;; ++ ++dgux*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; ++ ++freebsd1*) ++ dynamic_linker=no ++ ;; ++ ++freebsd* | dragonfly*) ++ # DragonFly does not have aout. When/if they implement a new ++ # versioning mechanism, adjust this. ++ if test -x /usr/bin/objformat; then ++ objformat=`/usr/bin/objformat` ++ else ++ case $host_os in ++ freebsd[123]*) objformat=aout ;; ++ *) objformat=elf ;; ++ esac ++ fi ++ version_type=freebsd-$objformat ++ case $version_type in ++ freebsd-elf*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ need_version=no ++ need_lib_prefix=no ++ ;; ++ freebsd-*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' ++ need_version=yes ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_os in ++ freebsd2*) ++ shlibpath_overrides_runpath=yes ++ ;; ++ freebsd3.[01]* | freebsdelf3.[01]*) ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ ++ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ freebsd*) # from 4.6 on ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ esac ++ ;; ++ ++gnu*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ ;; ++ ++hpux9* | hpux10* | hpux11*) ++ # Give a soname corresponding to the major version so that dld.sl refuses to ++ # link against other versions. ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ case $host_cpu in ++ ia64*) ++ shrext_cmds='.so' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.so" ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ if test "X$HPUX_IA64_MODE" = X32; then ++ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" ++ else ++ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" ++ fi ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ hppa*64*) ++ shrext_cmds='.sl' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ *) ++ shrext_cmds='.sl' ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=SHLIB_PATH ++ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; ++ esac ++ # HP-UX runs *really* slowly unless shared libraries are mode 555. ++ postinstall_cmds='chmod 555 $lib' ++ ;; ++ ++interix3*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ ++irix5* | irix6* | nonstopux*) ++ case $host_os in ++ nonstopux*) version_type=nonstopux ;; ++ *) ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ version_type=linux ++ else ++ version_type=irix ++ fi ;; ++ esac ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' ++ case $host_os in ++ irix5* | nonstopux*) ++ libsuff= shlibsuff= ++ ;; ++ *) ++ case $LD in # libtool.m4 will add one of these switches to LD ++ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") ++ libsuff= shlibsuff= libmagic=32-bit;; ++ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") ++ libsuff=32 shlibsuff=N32 libmagic=N32;; ++ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") ++ libsuff=64 shlibsuff=64 libmagic=64-bit;; ++ *) libsuff= shlibsuff= libmagic=never-match;; ++ esac ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" ++ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" ++ hardcode_into_libs=yes ++ ;; ++ ++# No shared lib support for Linux oldld, aout, or coff. ++linux*oldld* | linux*aout* | linux*coff*) ++ dynamic_linker=no ++ ;; ++ ++# This must be Linux ELF. ++linux* | k*bsd*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ # This implies no fast_install, which is unacceptable. ++ # Some rework will be needed to allow for fast_install ++ # before this can be enabled. ++ hardcode_into_libs=yes ++ ++ # Append ld.so.conf contents to the search path ++ if test -f /etc/ld.so.conf; then ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" ++ fi ++ ++ # We used to test for /lib/ld.so.1 and disable shared libraries on ++ # powerpc, because MkLinux only supported shared libraries with the ++ # GNU dynamic linker. Since this was broken with cross compilers, ++ # most powerpc-linux boxes support dynamic linking these days and ++ # people can always --disable-shared, the test was removed, and we ++ # assume the GNU/Linux dynamic linker is in use. ++ dynamic_linker='GNU/Linux ld.so' ++ ;; ++ ++netbsdelf*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='NetBSD ld.elf_so' ++ ;; ++ ++netbsd*) ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ dynamic_linker='NetBSD (a.out) ld.so' ++ else ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='NetBSD ld.elf_so' ++ fi ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ ++newsos6) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ ;; ++ ++nto-qnx*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ ;; ++ ++openbsd*) ++ version_type=sunos ++ sys_lib_dlsearch_path_spec="/usr/lib" ++ need_lib_prefix=no ++ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. ++ case $host_os in ++ openbsd3.3 | openbsd3.3.*) need_version=yes ;; ++ *) need_version=no ;; ++ esac ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ case $host_os in ++ openbsd2.[89] | openbsd2.[89].*) ++ shlibpath_overrides_runpath=no ++ ;; ++ *) ++ shlibpath_overrides_runpath=yes ++ ;; ++ esac ++ else ++ shlibpath_overrides_runpath=yes ++ fi ++ ;; ++ ++os2*) ++ libname_spec='$name' ++ shrext_cmds=".dll" ++ need_lib_prefix=no ++ library_names_spec='$libname${shared_ext} $libname.a' ++ dynamic_linker='OS/2 ld.exe' ++ shlibpath_var=LIBPATH ++ ;; ++ ++osf3* | osf4* | osf5*) ++ version_type=osf ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" ++ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ++ ;; ++ ++solaris*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ # ldd complains unless libraries are executable ++ postinstall_cmds='chmod +x $lib' ++ ;; ++ ++sunos4*) ++ version_type=sunos ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ if test "$with_gnu_ld" = yes; then ++ need_lib_prefix=no ++ fi ++ need_version=yes ++ ;; ++ ++sysv4 | sysv4.3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_vendor in ++ sni) ++ shlibpath_overrides_runpath=no ++ need_lib_prefix=no ++ export_dynamic_flag_spec='${wl}-Blargedynsym' ++ runpath_var=LD_RUN_PATH ++ ;; ++ siemens) ++ need_lib_prefix=no ++ ;; ++ motorola) ++ need_lib_prefix=no ++ need_version=no ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ++ ;; ++ esac ++ ;; ++ ++sysv4*MP*) ++ if test -d /usr/nec ;then ++ version_type=linux ++ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' ++ soname_spec='$libname${shared_ext}.$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ fi ++ ;; ++ ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ version_type=freebsd-elf ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ if test "$with_gnu_ld" = yes; then ++ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' ++ shlibpath_overrides_runpath=no ++ else ++ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' ++ shlibpath_overrides_runpath=yes ++ case $host_os in ++ sco3.2v5*) ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ++ ;; ++ esac ++ fi ++ sys_lib_dlsearch_path_spec='/usr/lib' ++ ;; ++ ++uts4*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; ++ ++*) ++ dynamic_linker=no ++ ;; ++esac ++echo "$as_me:$LINENO: result: $dynamic_linker" >&5 ++echo "${ECHO_T}$dynamic_linker" >&6 ++test "$dynamic_linker" = no && can_build_shared=no ++ ++variables_saved_for_relink="PATH $shlibpath_var $runpath_var" ++if test "$GCC" = yes; then ++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" ++fi ++ ++echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 ++hardcode_action_CXX= ++if test -n "$hardcode_libdir_flag_spec_CXX" || \ ++ test -n "$runpath_var_CXX" || \ ++ test "X$hardcode_automatic_CXX" = "Xyes" ; then ++ ++ # We can hardcode non-existant directories. ++ if test "$hardcode_direct_CXX" != no && ++ # If the only mechanism to avoid hardcoding is shlibpath_var, we ++ # have to relink, otherwise we might link with an installed library ++ # when we should be linking with a yet-to-be-installed one ++ ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no && ++ test "$hardcode_minus_L_CXX" != no; then ++ # Linking always hardcodes the temporary library directory. ++ hardcode_action_CXX=relink ++ else ++ # We can link without hardcoding, and we can hardcode nonexisting dirs. ++ hardcode_action_CXX=immediate ++ fi ++else ++ # We cannot hardcode anything, or else we can only hardcode existing ++ # directories. ++ hardcode_action_CXX=unsupported ++fi ++echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5 ++echo "${ECHO_T}$hardcode_action_CXX" >&6 ++ ++if test "$hardcode_action_CXX" = relink; then ++ # Fast installation is not supported ++ enable_fast_install=no ++elif test "$shlibpath_overrides_runpath" = yes || ++ test "$enable_shared" = no; then ++ # Fast installation is not necessary ++ enable_fast_install=needless ++fi ++ ++ ++# The else clause should only fire when bootstrapping the ++# libtool distribution, otherwise you forgot to ship ltmain.sh ++# with your package, and you will get complaints that there are ++# no rules to generate ltmain.sh. ++if test -f "$ltmain"; then ++ # See if we are running on zsh, and set the options which allow our commands through ++ # without removal of \ escapes. ++ if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++ fi ++ # Now quote all the things that may contain metacharacters while being ++ # careful not to overquote the AC_SUBSTed values. We take copies of the ++ # variables and quote the copies for generation of the libtool script. ++ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ ++ SED SHELL STRIP \ ++ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ ++ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ ++ deplibs_check_method reload_flag reload_cmds need_locks \ ++ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ ++ lt_cv_sys_global_symbol_to_c_name_address \ ++ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ ++ old_postinstall_cmds old_postuninstall_cmds \ ++ compiler_CXX \ ++ CC_CXX \ ++ LD_CXX \ ++ lt_prog_compiler_wl_CXX \ ++ lt_prog_compiler_pic_CXX \ ++ lt_prog_compiler_static_CXX \ ++ lt_prog_compiler_no_builtin_flag_CXX \ ++ export_dynamic_flag_spec_CXX \ ++ thread_safe_flag_spec_CXX \ ++ whole_archive_flag_spec_CXX \ ++ enable_shared_with_static_runtimes_CXX \ ++ old_archive_cmds_CXX \ ++ old_archive_from_new_cmds_CXX \ ++ predep_objects_CXX \ ++ postdep_objects_CXX \ ++ predeps_CXX \ ++ postdeps_CXX \ ++ compiler_lib_search_path_CXX \ ++ archive_cmds_CXX \ ++ archive_expsym_cmds_CXX \ ++ postinstall_cmds_CXX \ ++ postuninstall_cmds_CXX \ ++ old_archive_from_expsyms_cmds_CXX \ ++ allow_undefined_flag_CXX \ ++ no_undefined_flag_CXX \ ++ export_symbols_cmds_CXX \ ++ hardcode_libdir_flag_spec_CXX \ ++ hardcode_libdir_flag_spec_ld_CXX \ ++ hardcode_libdir_separator_CXX \ ++ hardcode_automatic_CXX \ ++ module_cmds_CXX \ ++ module_expsym_cmds_CXX \ ++ lt_cv_prog_compiler_c_o_CXX \ ++ exclude_expsyms_CXX \ ++ include_expsyms_CXX; do ++ ++ case $var in ++ old_archive_cmds_CXX | \ ++ old_archive_from_new_cmds_CXX | \ ++ archive_cmds_CXX | \ ++ archive_expsym_cmds_CXX | \ ++ module_cmds_CXX | \ ++ module_expsym_cmds_CXX | \ ++ old_archive_from_expsyms_cmds_CXX | \ ++ export_symbols_cmds_CXX | \ ++ extract_expsyms_cmds | reload_cmds | finish_cmds | \ ++ postinstall_cmds | postuninstall_cmds | \ ++ old_postinstall_cmds | old_postuninstall_cmds | \ ++ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) ++ # Double-quote double-evaled strings. ++ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ++ ;; ++ *) ++ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ++ ;; ++ esac ++ done ++ ++ case $lt_echo in ++ *'\$0 --fallback-echo"') ++ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` ++ ;; ++ esac ++ ++cfgfile="$ofile" ++ ++ cat <<__EOF__ >> "$cfgfile" ++# ### BEGIN LIBTOOL TAG CONFIG: $tagname ++ ++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: ++ ++# Shell to use when invoking shell scripts. ++SHELL=$lt_SHELL ++ ++# Whether or not to build shared libraries. ++build_libtool_libs=$enable_shared ++ ++# Whether or not to build static libraries. ++build_old_libs=$enable_static ++ ++# Whether or not to add -lc for building shared libraries. ++build_libtool_need_lc=$archive_cmds_need_lc_CXX ++ ++# Whether or not to disallow shared libs when runtime libs are static ++allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX ++ ++# Whether or not to optimize for fast installation. ++fast_install=$enable_fast_install ++ ++# The host system. ++host_alias=$host_alias ++host=$host ++host_os=$host_os ++ ++# The build system. ++build_alias=$build_alias ++build=$build ++build_os=$build_os ++ ++# An echo program that does not interpret backslashes. ++echo=$lt_echo ++ ++# The archiver. ++AR=$lt_AR ++AR_FLAGS=$lt_AR_FLAGS ++ ++# A C compiler. ++LTCC=$lt_LTCC ++ ++# LTCC compiler flags. ++LTCFLAGS=$lt_LTCFLAGS ++ ++# A language-specific compiler. ++CC=$lt_compiler_CXX ++ ++# Is the compiler the GNU C compiler? ++with_gcc=$GCC_CXX ++ ++# An ERE matcher. ++EGREP=$lt_EGREP ++ ++# The linker used to build libraries. ++LD=$lt_LD_CXX ++ ++# Whether we need hard or soft links. ++LN_S=$lt_LN_S ++ ++# A BSD-compatible nm program. ++NM=$lt_NM ++ ++# A symbol stripping program ++STRIP=$lt_STRIP ++ ++# Used to examine libraries when file_magic_cmd begins "file" ++MAGIC_CMD=$MAGIC_CMD ++ ++# Used on cygwin: DLL creation program. ++DLLTOOL="$DLLTOOL" ++ ++# Used on cygwin: object dumper. ++OBJDUMP="$OBJDUMP" ++ ++# Used on cygwin: assembler. ++AS="$AS" ++ ++# The name of the directory that contains temporary libtool files. ++objdir=$objdir ++ ++# How to create reloadable object files. ++reload_flag=$lt_reload_flag ++reload_cmds=$lt_reload_cmds ++ ++# How to pass a linker flag through the compiler. ++wl=$lt_lt_prog_compiler_wl_CXX ++ ++# Object file suffix (normally "o"). ++objext="$ac_objext" ++ ++# Old archive suffix (normally "a"). ++libext="$libext" ++ ++# Shared library suffix (normally ".so"). ++shrext_cmds='$shrext_cmds' ++ ++# Executable file suffix (normally ""). ++exeext="$exeext" ++ ++# Additional compiler flags for building library objects. ++pic_flag=$lt_lt_prog_compiler_pic_CXX ++pic_mode=$pic_mode ++ ++# What is the maximum length of a command? ++max_cmd_len=$lt_cv_sys_max_cmd_len ++ ++# Does compiler simultaneously support -c and -o options? ++compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX ++ ++# Must we lock files when doing compilation? ++need_locks=$lt_need_locks ++ ++# Do we need the lib prefix for modules? ++need_lib_prefix=$need_lib_prefix ++ ++# Do we need a version for libraries? ++need_version=$need_version ++ ++# Whether dlopen is supported. ++dlopen_support=$enable_dlopen ++ ++# Whether dlopen of programs is supported. ++dlopen_self=$enable_dlopen_self ++ ++# Whether dlopen of statically linked programs is supported. ++dlopen_self_static=$enable_dlopen_self_static ++ ++# Compiler flag to prevent dynamic linking. ++link_static_flag=$lt_lt_prog_compiler_static_CXX ++ ++# Compiler flag to turn off builtin functions. ++no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX ++ ++# Compiler flag to allow reflexive dlopens. ++export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX ++ ++# Compiler flag to generate shared objects directly from archives. ++whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX ++ ++# Compiler flag to generate thread-safe objects. ++thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX ++ ++# Library versioning type. ++version_type=$version_type ++ ++# Format of library name prefix. ++libname_spec=$lt_libname_spec ++ ++# List of archive names. First name is the real one, the rest are links. ++# The last name is the one that the linker finds with -lNAME. ++library_names_spec=$lt_library_names_spec ++ ++# The coded name of the library, if different from the real name. ++soname_spec=$lt_soname_spec ++ ++# Commands used to build and install an old-style archive. ++RANLIB=$lt_RANLIB ++old_archive_cmds=$lt_old_archive_cmds_CXX ++old_postinstall_cmds=$lt_old_postinstall_cmds ++old_postuninstall_cmds=$lt_old_postuninstall_cmds ++ ++# Create an old-style archive from a shared archive. ++old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX ++ ++# Create a temporary old-style archive to link instead of a shared archive. ++old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX ++ ++# Commands used to build and install a shared archive. ++archive_cmds=$lt_archive_cmds_CXX ++archive_expsym_cmds=$lt_archive_expsym_cmds_CXX ++postinstall_cmds=$lt_postinstall_cmds ++postuninstall_cmds=$lt_postuninstall_cmds ++ ++# Commands used to build a loadable module (assumed same as above if empty) ++module_cmds=$lt_module_cmds_CXX ++module_expsym_cmds=$lt_module_expsym_cmds_CXX ++ ++# Commands to strip libraries. ++old_striplib=$lt_old_striplib ++striplib=$lt_striplib ++ ++# Dependencies to place before the objects being linked to create a ++# shared library. ++predep_objects=$lt_predep_objects_CXX ++ ++# Dependencies to place after the objects being linked to create a ++# shared library. ++postdep_objects=$lt_postdep_objects_CXX ++ ++# Dependencies to place before the objects being linked to create a ++# shared library. ++predeps=$lt_predeps_CXX ++ ++# Dependencies to place after the objects being linked to create a ++# shared library. ++postdeps=$lt_postdeps_CXX ++ ++# The library search path used internally by the compiler when linking ++# a shared library. ++compiler_lib_search_path=$lt_compiler_lib_search_path_CXX ++ ++# Method to check whether dependent libraries are shared objects. ++deplibs_check_method=$lt_deplibs_check_method ++ ++# Command to use when deplibs_check_method == file_magic. ++file_magic_cmd=$lt_file_magic_cmd ++ ++# Flag that allows shared libraries with undefined symbols to be built. ++allow_undefined_flag=$lt_allow_undefined_flag_CXX ++ ++# Flag that forces no undefined symbols. ++no_undefined_flag=$lt_no_undefined_flag_CXX ++ ++# Commands used to finish a libtool library installation in a directory. ++finish_cmds=$lt_finish_cmds ++ ++# Same as above, but a single script fragment to be evaled but not shown. ++finish_eval=$lt_finish_eval ++ ++# Take the output of nm and produce a listing of raw symbols and C names. ++global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe ++ ++# Transform the output of nm in a proper C declaration ++global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl ++ ++# Transform the output of nm in a C name address pair ++global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address ++ ++# This is the shared library runtime path variable. ++runpath_var=$runpath_var ++ ++# This is the shared library path variable. ++shlibpath_var=$shlibpath_var ++ ++# Is shlibpath searched before the hard-coded library search path? ++shlibpath_overrides_runpath=$shlibpath_overrides_runpath ++ ++# How to hardcode a shared library path into an executable. ++hardcode_action=$hardcode_action_CXX ++ ++# Whether we should hardcode library paths into libraries. ++hardcode_into_libs=$hardcode_into_libs ++ ++# Flag to hardcode \$libdir into a binary during linking. ++# This must work even if \$libdir does not exist. ++hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX ++ ++# If ld is used when linking, flag to hardcode \$libdir into ++# a binary during linking. This must work even if \$libdir does ++# not exist. ++hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX ++ ++# Whether we need a single -rpath flag with a separated argument. ++hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX ++ ++# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the ++# resulting binary. ++hardcode_direct=$hardcode_direct_CXX ++ ++# Set to yes if using the -LDIR flag during linking hardcodes DIR into the ++# resulting binary. ++hardcode_minus_L=$hardcode_minus_L_CXX ++ ++# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into ++# the resulting binary. ++hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX ++ ++# Set to yes if building a shared library automatically hardcodes DIR into the library ++# and all subsequent libraries and executables linked against it. ++hardcode_automatic=$hardcode_automatic_CXX ++ ++# Variables whose values should be saved in libtool wrapper scripts and ++# restored at relink time. ++variables_saved_for_relink="$variables_saved_for_relink" ++ ++# Whether libtool must link a program against all its dependency libraries. ++link_all_deplibs=$link_all_deplibs_CXX ++ ++# Compile-time system search path for libraries ++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec ++ ++# Run-time system search path for libraries ++sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec ++ ++# Fix the shell variable \$srcfile for the compiler. ++fix_srcfile_path="$fix_srcfile_path_CXX" ++ ++# Set to yes if exported symbols are required. ++always_export_symbols=$always_export_symbols_CXX ++ ++# The commands to list exported symbols. ++export_symbols_cmds=$lt_export_symbols_cmds_CXX ++ ++# The commands to extract the exported symbol list from a shared archive. ++extract_expsyms_cmds=$lt_extract_expsyms_cmds ++ ++# Symbols that should not be listed in the preloaded symbols. ++exclude_expsyms=$lt_exclude_expsyms_CXX ++ ++# Symbols that must always be exported. ++include_expsyms=$lt_include_expsyms_CXX ++ ++# ### END LIBTOOL TAG CONFIG: $tagname ++ ++__EOF__ ++ ++ ++else ++ # If there is no Makefile yet, we rely on a make rule to execute ++ # `config.status --recheck' to rerun these tests and create the ++ # libtool script then. ++ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` ++ if test -f "$ltmain_in"; then ++ test -f Makefile && make "$ltmain" ++ fi ++fi ++ ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++CC=$lt_save_CC ++LDCXX=$LD ++LD=$lt_save_LD ++GCC=$lt_save_GCC ++with_gnu_ldcxx=$with_gnu_ld ++with_gnu_ld=$lt_save_with_gnu_ld ++lt_cv_path_LDCXX=$lt_cv_path_LD ++lt_cv_path_LD=$lt_save_path_LD ++lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld ++lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld ++ ++ else ++ tagname="" ++ fi ++ ;; ++ ++ F77) ++ if test -n "$F77" && test "X$F77" != "Xno"; then ++ ++ac_ext=f ++ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' ++ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_f77_compiler_gnu ++ ++ ++archive_cmds_need_lc_F77=no ++allow_undefined_flag_F77= ++always_export_symbols_F77=no ++archive_expsym_cmds_F77= ++export_dynamic_flag_spec_F77= ++hardcode_direct_F77=no ++hardcode_libdir_flag_spec_F77= ++hardcode_libdir_flag_spec_ld_F77= ++hardcode_libdir_separator_F77= ++hardcode_minus_L_F77=no ++hardcode_automatic_F77=no ++module_cmds_F77= ++module_expsym_cmds_F77= ++link_all_deplibs_F77=unknown ++old_archive_cmds_F77=$old_archive_cmds ++no_undefined_flag_F77= ++whole_archive_flag_spec_F77= ++enable_shared_with_static_runtimes_F77=no ++ ++# Source file extension for f77 test sources. ++ac_ext=f ++ ++# Object file extension for compiled f77 test sources. ++objext=o ++objext_F77=$objext ++ ++# Code to be used in simple compile tests ++lt_simple_compile_test_code=" subroutine t\n return\n end\n" ++ ++# Code to be used in simple link tests ++lt_simple_link_test_code=" program t\n end\n" ++ ++# ltmain only uses $CC for tagged configurations so make sure $CC is set. ++ ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} ++ ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++ ++# Allow CC to be a program name with arguments. ++compiler=$CC ++ ++ ++# save warnings/boilerplate of simple test code ++ac_outfile=conftest.$ac_objext ++printf "$lt_simple_compile_test_code" >conftest.$ac_ext ++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_compiler_boilerplate=`cat conftest.err` ++$rm conftest* ++ ++ac_outfile=conftest.$ac_objext ++printf "$lt_simple_link_test_code" >conftest.$ac_ext ++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_linker_boilerplate=`cat conftest.err` ++$rm conftest* ++ ++ ++# Allow CC to be a program name with arguments. ++lt_save_CC="$CC" ++CC=${F77-"f77"} ++compiler=$CC ++compiler_F77=$CC ++for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++ ++ ++echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 ++echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 ++echo "$as_me:$LINENO: result: $can_build_shared" >&5 ++echo "${ECHO_T}$can_build_shared" >&6 ++ ++echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 ++echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 ++test "$can_build_shared" = "no" && enable_shared=no ++ ++# On AIX, shared libraries and static libraries use the same namespace, and ++# are all built from PIC. ++case $host_os in ++aix3*) ++ test "$enable_shared" = yes && enable_static=no ++ if test -n "$RANLIB"; then ++ archive_cmds="$archive_cmds~\$RANLIB \$lib" ++ postinstall_cmds='$RANLIB $lib' ++ fi ++ ;; ++aix4* | aix5*) ++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then ++ test "$enable_shared" = yes && enable_static=no ++ fi ++ ;; ++esac ++echo "$as_me:$LINENO: result: $enable_shared" >&5 ++echo "${ECHO_T}$enable_shared" >&6 ++ ++echo "$as_me:$LINENO: checking whether to build static libraries" >&5 ++echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 ++# Make sure either enable_shared or enable_static is yes. ++test "$enable_shared" = yes || enable_static=yes ++echo "$as_me:$LINENO: result: $enable_static" >&5 ++echo "${ECHO_T}$enable_static" >&6 ++ ++GCC_F77="$G77" ++LD_F77="$LD" ++ ++lt_prog_compiler_wl_F77= ++lt_prog_compiler_pic_F77= ++lt_prog_compiler_static_F77= ++ ++echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 ++ ++ if test "$GCC" = yes; then ++ lt_prog_compiler_wl_F77='-Wl,' ++ lt_prog_compiler_static_F77='-static' ++ ++ case $host_os in ++ aix*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ lt_prog_compiler_static_F77='-Bstatic' ++ fi ++ ;; ++ ++ amigaos*) ++ # FIXME: we need at least 68020 code to build shared libraries, but ++ # adding the `-m68020' flag to GCC prevents building anything better, ++ # like `-m68040'. ++ lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4' ++ ;; ++ ++ beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ # PIC is the default for these OSes. ++ ;; ++ ++ mingw* | pw32* | os2*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ lt_prog_compiler_pic_F77='-DDLL_EXPORT' ++ ;; ++ ++ darwin* | rhapsody*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ lt_prog_compiler_pic_F77='-fno-common' ++ ;; ++ ++ interix3*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; ++ ++ msdosdjgpp*) ++ # Just because we use GCC doesn't mean we suddenly get shared libraries ++ # on systems that don't support them. ++ lt_prog_compiler_can_build_shared_F77=no ++ enable_shared=no ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ lt_prog_compiler_pic_F77=-Kconform_pic ++ fi ++ ;; ++ ++ hpux*) ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ lt_prog_compiler_pic_F77='-fPIC' ++ ;; ++ esac ++ ;; ++ ++ *) ++ lt_prog_compiler_pic_F77='-fPIC' ++ ;; ++ esac ++ else ++ # PORTME Check for flag to pass linker flags through the system compiler. ++ case $host_os in ++ aix*) ++ lt_prog_compiler_wl_F77='-Wl,' ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ lt_prog_compiler_static_F77='-Bstatic' ++ else ++ lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp' ++ fi ++ ;; ++ darwin*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ case $cc_basename in ++ xlc*) ++ lt_prog_compiler_pic_F77='-qnocommon' ++ lt_prog_compiler_wl_F77='-Wl,' ++ ;; ++ esac ++ ;; ++ ++ mingw* | pw32* | os2*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ lt_prog_compiler_pic_F77='-DDLL_EXPORT' ++ ;; ++ ++ hpux9* | hpux10* | hpux11*) ++ lt_prog_compiler_wl_F77='-Wl,' ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ lt_prog_compiler_pic_F77='+Z' ++ ;; ++ esac ++ # Is there a better lt_prog_compiler_static that works with the bundled CC? ++ lt_prog_compiler_static_F77='${wl}-a ${wl}archive' ++ ;; ++ ++ irix5* | irix6* | nonstopux*) ++ lt_prog_compiler_wl_F77='-Wl,' ++ # PIC (with -KPIC) is the default. ++ lt_prog_compiler_static_F77='-non_shared' ++ ;; ++ ++ newsos6) ++ lt_prog_compiler_pic_F77='-KPIC' ++ lt_prog_compiler_static_F77='-Bstatic' ++ ;; ++ ++ linux* | k*bsd*-gnu) ++ case $cc_basename in ++ icc* | ecc*) ++ lt_prog_compiler_wl_F77='-Wl,' ++ lt_prog_compiler_pic_F77='-KPIC' ++ lt_prog_compiler_static_F77='-static' ++ ;; ++ pgcc* | pgf77* | pgf90* | pgf95*) ++ # Portland Group compilers (*not* the Pentium gcc compiler, ++ # which looks to be a dead project) ++ lt_prog_compiler_wl_F77='-Wl,' ++ lt_prog_compiler_pic_F77='-fpic' ++ lt_prog_compiler_static_F77='-Bstatic' ++ ;; ++ ccc*) ++ lt_prog_compiler_wl_F77='-Wl,' ++ # All Alpha code is PIC. ++ lt_prog_compiler_static_F77='-non_shared' ++ ;; ++ esac ++ ;; ++ ++ osf3* | osf4* | osf5*) ++ lt_prog_compiler_wl_F77='-Wl,' ++ # All OSF/1 code is PIC. ++ lt_prog_compiler_static_F77='-non_shared' ++ ;; ++ ++ solaris*) ++ lt_prog_compiler_pic_F77='-KPIC' ++ lt_prog_compiler_static_F77='-Bstatic' ++ case $cc_basename in ++ f77* | f90* | f95*) ++ lt_prog_compiler_wl_F77='-Qoption ld ';; ++ *) ++ lt_prog_compiler_wl_F77='-Wl,';; ++ esac ++ ;; ++ ++ sunos4*) ++ lt_prog_compiler_wl_F77='-Qoption ld ' ++ lt_prog_compiler_pic_F77='-PIC' ++ lt_prog_compiler_static_F77='-Bstatic' ++ ;; ++ ++ sysv4 | sysv4.2uw2* | sysv4.3*) ++ lt_prog_compiler_wl_F77='-Wl,' ++ lt_prog_compiler_pic_F77='-KPIC' ++ lt_prog_compiler_static_F77='-Bstatic' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec ;then ++ lt_prog_compiler_pic_F77='-Kconform_pic' ++ lt_prog_compiler_static_F77='-Bstatic' ++ fi ++ ;; ++ ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ lt_prog_compiler_wl_F77='-Wl,' ++ lt_prog_compiler_pic_F77='-KPIC' ++ lt_prog_compiler_static_F77='-Bstatic' ++ ;; ++ ++ unicos*) ++ lt_prog_compiler_wl_F77='-Wl,' ++ lt_prog_compiler_can_build_shared_F77=no ++ ;; ++ ++ uts4*) ++ lt_prog_compiler_pic_F77='-pic' ++ lt_prog_compiler_static_F77='-Bstatic' ++ ;; ++ ++ *) ++ lt_prog_compiler_can_build_shared_F77=no ++ ;; ++ esac ++ fi ++ ++echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6 ++ ++# ++# Check to make sure the PIC flag actually works. ++# ++if test -n "$lt_prog_compiler_pic_F77"; then ++ ++echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6 ++if test "${lt_prog_compiler_pic_works_F77+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_prog_compiler_pic_works_F77=no ++ ac_outfile=conftest.$ac_objext ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="$lt_prog_compiler_pic_F77" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:13109: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&5 ++ echo "$as_me:13113: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ lt_prog_compiler_pic_works_F77=yes ++ fi ++ fi ++ $rm conftest* ++ ++fi ++echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_F77" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_works_F77" >&6 ++ ++if test x"$lt_prog_compiler_pic_works_F77" = xyes; then ++ case $lt_prog_compiler_pic_F77 in ++ "" | " "*) ;; ++ *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;; ++ esac ++else ++ lt_prog_compiler_pic_F77= ++ lt_prog_compiler_can_build_shared_F77=no ++fi ++ ++fi ++case $host_os in ++ # For platforms which do not support PIC, -DPIC is meaningless: ++ *djgpp*) ++ lt_prog_compiler_pic_F77= ++ ;; ++ *) ++ lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77" ++ ;; ++esac ++ ++# ++# Check to make sure the static flag actually works. ++# ++wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\" ++echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6 ++if test "${lt_prog_compiler_static_works_F77+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_prog_compiler_static_works_F77=no ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS $lt_tmp_static_flag" ++ printf "$lt_simple_link_test_code" > conftest.$ac_ext ++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then ++ # The linker can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ if test -s conftest.err; then ++ # Append any errors to the config.log. ++ cat conftest.err 1>&5 ++ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if diff conftest.exp conftest.er2 >/dev/null; then ++ lt_prog_compiler_static_works_F77=yes ++ fi ++ else ++ lt_prog_compiler_static_works_F77=yes ++ fi ++ fi ++ $rm conftest* ++ LDFLAGS="$save_LDFLAGS" ++ ++fi ++echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_F77" >&5 ++echo "${ECHO_T}$lt_prog_compiler_static_works_F77" >&6 ++ ++if test x"$lt_prog_compiler_static_works_F77" = xyes; then ++ : ++else ++ lt_prog_compiler_static_F77= ++fi ++ ++ ++echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 ++if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_c_o_F77=no ++ $rm -r conftest 2>/dev/null ++ mkdir conftest ++ cd conftest ++ mkdir out ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ lt_compiler_flag="-o out/conftest2.$ac_objext" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:13213: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>out/conftest.err) ++ ac_status=$? ++ cat out/conftest.err >&5 ++ echo "$as_me:13217: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s out/conftest2.$ac_objext ++ then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_c_o_F77=yes ++ fi ++ fi ++ chmod u+w . 2>&5 ++ $rm conftest* ++ # SGI C++ compiler will create directory out/ii_files/ for ++ # template instantiation ++ test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files ++ $rm out/* && rmdir out ++ cd .. ++ rmdir conftest ++ $rm conftest* ++ ++fi ++echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6 ++ ++ ++hard_links="nottested" ++if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then ++ # do not overwrite the value of need_locks provided by the user ++ echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 ++ hard_links=yes ++ $rm conftest* ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ touch conftest.a ++ ln conftest.a conftest.b 2>&5 || hard_links=no ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ echo "$as_me:$LINENO: result: $hard_links" >&5 ++echo "${ECHO_T}$hard_links" >&6 ++ if test "$hard_links" = no; then ++ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 ++echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} ++ need_locks=warn ++ fi ++else ++ need_locks=no ++fi ++ ++echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 ++ ++ runpath_var= ++ allow_undefined_flag_F77= ++ enable_shared_with_static_runtimes_F77=no ++ archive_cmds_F77= ++ archive_expsym_cmds_F77= ++ old_archive_From_new_cmds_F77= ++ old_archive_from_expsyms_cmds_F77= ++ export_dynamic_flag_spec_F77= ++ whole_archive_flag_spec_F77= ++ thread_safe_flag_spec_F77= ++ hardcode_libdir_flag_spec_F77= ++ hardcode_libdir_flag_spec_ld_F77= ++ hardcode_libdir_separator_F77= ++ hardcode_direct_F77=no ++ hardcode_minus_L_F77=no ++ hardcode_shlibpath_var_F77=unsupported ++ link_all_deplibs_F77=unknown ++ hardcode_automatic_F77=no ++ module_cmds_F77= ++ module_expsym_cmds_F77= ++ always_export_symbols_F77=no ++ export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ # include_expsyms should be a list of space-separated symbols to be *always* ++ # included in the symbol list ++ include_expsyms_F77= ++ # exclude_expsyms can be an extended regexp of symbols to exclude ++ # it will be wrapped by ` (' and `)$', so one must not match beginning or ++ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', ++ # as well as any symbol that contains `d'. ++ exclude_expsyms_F77="_GLOBAL_OFFSET_TABLE_" ++ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out ++ # platforms (ab)use it in PIC code, but their linkers get confused if ++ # the symbol is explicitly referenced. Since portable code cannot ++ # rely on this symbol name, it's probably fine to never include it in ++ # preloaded symbol tables. ++ extract_expsyms_cmds= ++ # Just being paranoid about ensuring that cc_basename is set. ++ for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++ ++ case $host_os in ++ cygwin* | mingw* | pw32*) ++ # FIXME: the MSVC++ port hasn't been tested in a loooong time ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ if test "$GCC" != yes; then ++ with_gnu_ld=no ++ fi ++ ;; ++ interix*) ++ # we just hope/assume this is gcc and not c89 (= MSVC++) ++ with_gnu_ld=yes ++ ;; ++ openbsd*) ++ with_gnu_ld=no ++ ;; ++ esac ++ ++ ld_shlibs_F77=yes ++ if test "$with_gnu_ld" = yes; then ++ # If archive_cmds runs LD, not CC, wlarc should be empty ++ wlarc='${wl}' ++ ++ # Set some defaults for GNU ld with shared library support. These ++ # are reset later if shared libraries are not supported. Putting them ++ # here allows them to be overridden if necessary. ++ runpath_var=LD_RUN_PATH ++ hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir' ++ export_dynamic_flag_spec_F77='${wl}--export-dynamic' ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then ++ whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ whole_archive_flag_spec_F77= ++ fi ++ supports_anon_versioning=no ++ case `$LD -v 2>/dev/null` in ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 ++ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... ++ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... ++ *\ 2.11.*) ;; # other 2.11 versions ++ *) supports_anon_versioning=yes ;; ++ esac ++ ++ # See if GNU ld supports shared libraries. ++ case $host_os in ++ aix3* | aix4* | aix5*) ++ # On AIX/PPC, the GNU linker is very broken ++ if test "$host_cpu" != ia64; then ++ ld_shlibs_F77=no ++ cat <&2 ++ ++*** Warning: the GNU linker, at least up to release 2.9.1, is reported ++*** to be unable to reliably create shared libraries on AIX. ++*** Therefore, libtool is disabling shared libraries support. If you ++*** really care for shared libraries, you may want to modify your PATH ++*** so that a non-GNU linker is found, and then restart. ++ ++EOF ++ fi ++ ;; ++ ++ amigaos*) ++ archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ hardcode_libdir_flag_spec_F77='-L$libdir' ++ hardcode_minus_L_F77=yes ++ ++ # Samuel A. Falvo II reports ++ # that the semantics of dynamic libraries on AmigaOS, at least up ++ # to version 4, is to share data among multiple programs linked ++ # with the same dynamic library. Since this doesn't match the ++ # behavior of shared libraries on other platforms, we can't use ++ # them. ++ ld_shlibs_F77=no ++ ;; ++ ++ beos*) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ allow_undefined_flag_F77=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ else ++ ld_shlibs_F77=no ++ fi ++ ;; ++ ++ cygwin* | mingw* | pw32*) ++ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless, ++ # as there is no search path for DLLs. ++ hardcode_libdir_flag_spec_F77='-L$libdir' ++ allow_undefined_flag_F77=unsupported ++ always_export_symbols_F77=no ++ enable_shared_with_static_runtimes_F77=yes ++ export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' ++ ++ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then ++ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ # If the export-symbols file already is a .def file (1st line ++ # is EXPORTS), use it as is; otherwise, prepend... ++ archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ cp $export_symbols $output_objdir/$soname.def; ++ else ++ echo EXPORTS > $output_objdir/$soname.def; ++ cat $export_symbols >> $output_objdir/$soname.def; ++ fi~ ++ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ ld_shlibs_F77=no ++ fi ++ ;; ++ ++ interix3*) ++ hardcode_direct_F77=no ++ hardcode_shlibpath_var_F77=no ++ hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec_F77='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; ++ ++ linux* | k*bsd*-gnu) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ tmp_addflag= ++ case $cc_basename,$host_cpu in ++ pgcc*) # Portland Group C compiler ++ whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag' ++ ;; ++ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers ++ whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag -Mnomain' ;; ++ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 ++ tmp_addflag=' -i_dynamic' ;; ++ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 ++ tmp_addflag=' -i_dynamic -nofor_main' ;; ++ ifc* | ifort*) # Intel Fortran compiler ++ tmp_addflag=' -nofor_main' ;; ++ esac ++ archive_cmds_F77='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ ++ if test $supports_anon_versioning = yes; then ++ archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ $echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' ++ fi ++ link_all_deplibs_F77=no ++ else ++ ld_shlibs_F77=no ++ fi ++ ;; ++ ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' ++ wlarc= ++ else ++ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ fi ++ ;; ++ ++ solaris*) ++ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then ++ ld_shlibs_F77=no ++ cat <&2 ++ ++*** Warning: The releases 2.8.* of the GNU linker cannot reliably ++*** create shared libraries on Solaris systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.9.1 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. ++ ++EOF ++ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ ld_shlibs_F77=no ++ fi ++ ;; ++ ++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) ++ case `$LD -v 2>&1` in ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ++ ld_shlibs_F77=no ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not ++*** reliably create shared libraries on SCO systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.16.91.0.3 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. ++ ++_LT_EOF ++ ;; ++ *) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' ++ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' ++ archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' ++ else ++ ld_shlibs_F77=no ++ fi ++ ;; ++ esac ++ ;; ++ ++ sunos4*) ++ archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ wlarc= ++ hardcode_direct_F77=yes ++ hardcode_shlibpath_var_F77=no ++ ;; ++ ++ *) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ ld_shlibs_F77=no ++ fi ++ ;; ++ esac ++ ++ if test "$ld_shlibs_F77" = no; then ++ runpath_var= ++ hardcode_libdir_flag_spec_F77= ++ export_dynamic_flag_spec_F77= ++ whole_archive_flag_spec_F77= ++ fi ++ else ++ # PORTME fill in a description of your system's linker (not GNU ld) ++ case $host_os in ++ aix3*) ++ allow_undefined_flag_F77=unsupported ++ always_export_symbols_F77=yes ++ archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' ++ # Note: this linker hardcodes the directories in LIBPATH if there ++ # are no directories specified by -L. ++ hardcode_minus_L_F77=yes ++ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then ++ # Neither direct hardcoding nor static linking is supported with a ++ # broken collect2. ++ hardcode_direct_F77=unsupported ++ fi ++ ;; ++ ++ aix4* | aix5*) ++ if test "$host_cpu" = ia64; then ++ # On IA64, the linker does run time linking by default, so we don't ++ # have to do anything special. ++ aix_use_runtimelinking=no ++ exp_sym_flag='-Bexport' ++ no_entry_flag="" ++ else ++ # If we're using GNU nm, then we don't want the "-C" option. ++ # -C means demangle to AIX nm, but means don't demangle with GNU nm ++ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then ++ export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' ++ else ++ export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' ++ fi ++ aix_use_runtimelinking=no ++ ++ # Test if we are trying to use run time linking or normal ++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we ++ # need to do runtime linking. ++ case $host_os in aix4.[23]|aix4.[23].*|aix5*) ++ for ld_flag in $LDFLAGS; do ++ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then ++ aix_use_runtimelinking=yes ++ break ++ fi ++ done ++ ;; ++ esac ++ ++ exp_sym_flag='-bexport' ++ no_entry_flag='-bnoentry' ++ fi ++ ++ # When large executables or shared objects are built, AIX ld can ++ # have problems creating the table of contents. If linking a library ++ # or program results in "error TOC overflow" add -mminimal-toc to ++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not ++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. ++ ++ archive_cmds_F77='' ++ hardcode_direct_F77=yes ++ hardcode_libdir_separator_F77=':' ++ link_all_deplibs_F77=yes ++ ++ if test "$GCC" = yes; then ++ case $host_os in aix4.[012]|aix4.[012].*) ++ # We only want to do this on AIX 4.2 and lower, the check ++ # below for broken collect2 doesn't work under 4.3+ ++ collect2name=`${CC} -print-prog-name=collect2` ++ if test -f "$collect2name" && \ ++ strings "$collect2name" | grep resolve_lib_name >/dev/null ++ then ++ # We have reworked collect2 ++ hardcode_direct_F77=yes ++ else ++ # We have old collect2 ++ hardcode_direct_F77=unsupported ++ # It fails to find uninstalled libraries when the uninstalled ++ # path is not listed in the libpath. Setting hardcode_minus_L ++ # to unsupported forces relinking ++ hardcode_minus_L_F77=yes ++ hardcode_libdir_flag_spec_F77='-L$libdir' ++ hardcode_libdir_separator_F77= ++ fi ++ ;; ++ esac ++ shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi ++ else ++ # not using gcc ++ if test "$host_cpu" = ia64; then ++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release ++ # chokes on -Wl,-G. The following line is correct: ++ shared_flag='-G' ++ else ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag='${wl}-G' ++ else ++ shared_flag='${wl}-bM:SRE' ++ fi ++ fi ++ fi ++ ++ # It seems that -bexpall does not export symbols beginning with ++ # underscore (_), so it is better to generate a list of symbols to export. ++ always_export_symbols_F77=yes ++ if test "$aix_use_runtimelinking" = yes; then ++ # Warning - without using the other runtime loading flags (-brtl), ++ # -berok will link without error, but may produce a broken library. ++ allow_undefined_flag_F77='-berok' ++ # Determine the default libpath from the value encoded in an empty executable. ++ cat >conftest.$ac_ext <<_ACEOF ++ program main ++ ++ end ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'`; fi ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++fi ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ ++ hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" ++ archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ else ++ if test "$host_cpu" = ia64; then ++ hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib' ++ allow_undefined_flag_F77="-z nodefs" ++ archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" ++ else ++ # Determine the default libpath from the value encoded in an empty executable. ++ cat >conftest.$ac_ext <<_ACEOF ++ program main ++ ++ end ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'`; fi ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++fi ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ ++ hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" ++ # Warning - without using the other run time loading flags, ++ # -berok will link without error, but may produce a broken library. ++ no_undefined_flag_F77=' ${wl}-bernotok' ++ allow_undefined_flag_F77=' ${wl}-berok' ++ # Exported symbols can be pulled into shared objects from archives ++ whole_archive_flag_spec_F77='$convenience' ++ archive_cmds_need_lc_F77=yes ++ # This is similar to how AIX traditionally builds its shared libraries. ++ archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ fi ++ fi ++ ;; ++ ++ amigaos*) ++ archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ hardcode_libdir_flag_spec_F77='-L$libdir' ++ hardcode_minus_L_F77=yes ++ # see comment about different semantics on the GNU ld section ++ ld_shlibs_F77=no ++ ;; ++ ++ bsdi[45]*) ++ export_dynamic_flag_spec_F77=-rdynamic ++ ;; ++ ++ cygwin* | mingw* | pw32*) ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ # hardcode_libdir_flag_spec is actually meaningless, as there is ++ # no search path for DLLs. ++ hardcode_libdir_flag_spec_F77=' ' ++ allow_undefined_flag_F77=unsupported ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' ++ # The linker will automatically build a .lib file if we build a DLL. ++ old_archive_From_new_cmds_F77='true' ++ # FIXME: Should let the user specify the lib program. ++ old_archive_cmds_F77='lib /OUT:$oldlib$oldobjs$old_deplibs' ++ fix_srcfile_path_F77='`cygpath -w "$srcfile"`' ++ enable_shared_with_static_runtimes_F77=yes ++ ;; ++ ++ darwin* | rhapsody*) ++ case $host_os in ++ rhapsody* | darwin1.[012]) ++ allow_undefined_flag_F77='${wl}-undefined ${wl}suppress' ++ ;; ++ *) # Darwin 1.3 on ++ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then ++ allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ else ++ case ${MACOSX_DEPLOYMENT_TARGET} in ++ 10.[012]) ++ allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ ;; ++ 10.*) ++ allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup' ++ ;; ++ esac ++ fi ++ ;; ++ esac ++ archive_cmds_need_lc_F77=no ++ hardcode_direct_F77=no ++ hardcode_automatic_F77=yes ++ hardcode_shlibpath_var_F77=unsupported ++ whole_archive_flag_spec_F77='' ++ link_all_deplibs_F77=yes ++ if test "$GCC" = yes ; then ++ output_verbose_link_cmd='echo' ++ archive_cmds_F77='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' ++ module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ else ++ case $cc_basename in ++ xlc*) ++ output_verbose_link_cmd='echo' ++ archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' ++ module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ ;; ++ *) ++ ld_shlibs_F77=no ++ ;; ++ esac ++ fi ++ ;; ++ ++ dgux*) ++ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec_F77='-L$libdir' ++ hardcode_shlibpath_var_F77=no ++ ;; ++ ++ freebsd1*) ++ ld_shlibs_F77=no ++ ;; ++ ++ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor ++ # support. Future versions do this automatically, but an explicit c++rt0.o ++ # does not break anything, and helps significantly (at the cost of a little ++ # extra space). ++ freebsd2.2*) ++ archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' ++ hardcode_libdir_flag_spec_F77='-R$libdir' ++ hardcode_direct_F77=yes ++ hardcode_shlibpath_var_F77=no ++ ;; ++ ++ # Unfortunately, older versions of FreeBSD 2 do not have this feature. ++ freebsd2*) ++ archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct_F77=yes ++ hardcode_minus_L_F77=yes ++ hardcode_shlibpath_var_F77=no ++ ;; ++ ++ # FreeBSD 3 and greater uses gcc -shared to do shared libraries. ++ freebsd* | dragonfly*) ++ archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' ++ hardcode_libdir_flag_spec_F77='-R$libdir' ++ hardcode_direct_F77=yes ++ hardcode_shlibpath_var_F77=no ++ ;; ++ ++ hpux9*) ++ if test "$GCC" = yes; then ++ archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ else ++ archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ fi ++ hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator_F77=: ++ hardcode_direct_F77=yes ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L_F77=yes ++ export_dynamic_flag_spec_F77='${wl}-E' ++ ;; ++ ++ hpux10*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ if test "$with_gnu_ld" = no; then ++ hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator_F77=: ++ ++ hardcode_direct_F77=yes ++ export_dynamic_flag_spec_F77='${wl}-E' ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L_F77=yes ++ fi ++ ;; ++ ++ hpux11*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ else ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ fi ++ if test "$with_gnu_ld" = no; then ++ hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator_F77=: ++ ++ case $host_cpu in ++ hppa*64*|ia64*) ++ hardcode_libdir_flag_spec_ld_F77='+b $libdir' ++ hardcode_direct_F77=no ++ hardcode_shlibpath_var_F77=no ++ ;; ++ *) ++ hardcode_direct_F77=yes ++ export_dynamic_flag_spec_F77='${wl}-E' ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L_F77=yes ++ ;; ++ esac ++ fi ++ ;; ++ ++ irix5* | irix6* | nonstopux*) ++ if test "$GCC" = yes; then ++ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ hardcode_libdir_flag_spec_ld_F77='-rpath $libdir' ++ fi ++ hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator_F77=: ++ link_all_deplibs_F77=yes ++ ;; ++ ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out ++ else ++ archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF ++ fi ++ hardcode_libdir_flag_spec_F77='-R$libdir' ++ hardcode_direct_F77=yes ++ hardcode_shlibpath_var_F77=no ++ ;; ++ ++ newsos6) ++ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct_F77=yes ++ hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator_F77=: ++ hardcode_shlibpath_var_F77=no ++ ;; ++ ++ openbsd*) ++ hardcode_direct_F77=yes ++ hardcode_shlibpath_var_F77=no ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' ++ hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec_F77='${wl}-E' ++ else ++ case $host_os in ++ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) ++ archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec_F77='-R$libdir' ++ ;; ++ *) ++ archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' ++ ;; ++ esac ++ fi ++ ;; ++ ++ os2*) ++ hardcode_libdir_flag_spec_F77='-L$libdir' ++ hardcode_minus_L_F77=yes ++ allow_undefined_flag_F77=unsupported ++ archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' ++ old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ++ ;; ++ ++ osf3*) ++ if test "$GCC" = yes; then ++ allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ allow_undefined_flag_F77=' -expect_unresolved \*' ++ archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ fi ++ hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator_F77=: ++ ;; ++ ++ osf4* | osf5*) # as osf3* with the addition of -msym flag ++ if test "$GCC" = yes; then ++ allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' ++ else ++ allow_undefined_flag_F77=' -expect_unresolved \*' ++ archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ ++ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' ++ ++ # Both c and cxx compiler support -rpath directly ++ hardcode_libdir_flag_spec_F77='-rpath $libdir' ++ fi ++ hardcode_libdir_separator_F77=: ++ ;; ++ ++ solaris*) ++ no_undefined_flag_F77=' -z text' ++ if test "$GCC" = yes; then ++ wlarc='${wl}' ++ archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ ++ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' ++ else ++ wlarc='' ++ archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ ++ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' ++ fi ++ hardcode_libdir_flag_spec_F77='-R$libdir' ++ hardcode_shlibpath_var_F77=no ++ case $host_os in ++ solaris2.[0-5] | solaris2.[0-5].*) ;; ++ *) ++ # The compiler driver will combine linker options so we ++ # cannot just pass the convience library names through ++ # without $wl, iff we do not link with $LD. ++ # Luckily, gcc supports the same syntax we need for Sun Studio. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ case $wlarc in ++ '') ++ whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' ;; ++ *) ++ whole_archive_flag_spec_F77='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; ++ esac ;; ++ esac ++ link_all_deplibs_F77=yes ++ ;; ++ ++ sunos4*) ++ if test "x$host_vendor" = xsequent; then ++ # Use $CC to link under sequent, because it throws in some extra .o ++ # files that make .init and .fini sections work. ++ archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ hardcode_libdir_flag_spec_F77='-L$libdir' ++ hardcode_direct_F77=yes ++ hardcode_minus_L_F77=yes ++ hardcode_shlibpath_var_F77=no ++ ;; ++ ++ sysv4) ++ case $host_vendor in ++ sni) ++ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct_F77=yes # is this really true??? ++ ;; ++ siemens) ++ ## LD is ld it makes a PLAMLIB ++ ## CC just makes a GrossModule. ++ archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags' ++ reload_cmds_F77='$CC -r -o $output$reload_objs' ++ hardcode_direct_F77=no ++ ;; ++ motorola) ++ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie ++ ;; ++ esac ++ runpath_var='LD_RUN_PATH' ++ hardcode_shlibpath_var_F77=no ++ ;; ++ ++ sysv4.3*) ++ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_shlibpath_var_F77=no ++ export_dynamic_flag_spec_F77='-Bexport' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_shlibpath_var_F77=no ++ runpath_var=LD_RUN_PATH ++ hardcode_runpath_var=yes ++ ld_shlibs_F77=yes ++ fi ++ ;; ++ ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*) ++ no_undefined_flag_F77='${wl}-z,text' ++ archive_cmds_need_lc_F77=no ++ hardcode_shlibpath_var_F77=no ++ runpath_var='LD_RUN_PATH' ++ ++ if test "$GCC" = yes; then ++ archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; ++ ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ no_undefined_flag_F77='${wl}-z,text' ++ allow_undefined_flag_F77='${wl}-z,nodefs' ++ archive_cmds_need_lc_F77=no ++ hardcode_shlibpath_var_F77=no ++ hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' ++ hardcode_libdir_separator_F77=':' ++ link_all_deplibs_F77=yes ++ export_dynamic_flag_spec_F77='${wl}-Bexport' ++ runpath_var='LD_RUN_PATH' ++ ++ if test "$GCC" = yes; then ++ archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; ++ ++ uts4*) ++ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec_F77='-L$libdir' ++ hardcode_shlibpath_var_F77=no ++ ;; ++ ++ *) ++ ld_shlibs_F77=no ++ ;; ++ esac ++ fi ++ ++echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5 ++echo "${ECHO_T}$ld_shlibs_F77" >&6 ++test "$ld_shlibs_F77" = no && can_build_shared=no ++ ++# ++# Do we need to explicitly link libc? ++# ++case "x$archive_cmds_need_lc_F77" in ++x|xyes) ++ # Assume -lc should be added ++ archive_cmds_need_lc_F77=yes ++ ++ if test "$enable_shared" = yes && test "$GCC" = yes; then ++ case $archive_cmds_F77 in ++ *'~'*) ++ # FIXME: we may have to deal with multi-command sequences. ++ ;; ++ '$CC '*) ++ # Test whether the compiler implicitly links with -lc since on some ++ # systems, -lgcc has to come before -lc. If gcc already passes -lc ++ # to ld, don't add -lc before -lgcc. ++ echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 ++ $rm conftest* ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } 2>conftest.err; then ++ soname=conftest ++ lib=conftest ++ libobjs=conftest.$ac_objext ++ deplibs= ++ wl=$lt_prog_compiler_wl_F77 ++ pic_flag=$lt_prog_compiler_pic_F77 ++ compiler_flags=-v ++ linker_flags=-v ++ verstring= ++ output_objdir=. ++ libname=conftest ++ lt_save_allow_undefined_flag=$allow_undefined_flag_F77 ++ allow_undefined_flag_F77= ++ if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 ++ (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++ then ++ archive_cmds_need_lc_F77=no ++ else ++ archive_cmds_need_lc_F77=yes ++ fi ++ allow_undefined_flag_F77=$lt_save_allow_undefined_flag ++ else ++ cat conftest.err 1>&5 ++ fi ++ $rm conftest* ++ echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5 ++echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6 ++ ;; ++ esac ++ fi ++ ;; ++esac ++ ++echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 ++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 ++library_names_spec= ++libname_spec='lib$name' ++soname_spec= ++shrext_cmds=".so" ++postinstall_cmds= ++postuninstall_cmds= ++finish_cmds= ++finish_eval= ++shlibpath_var= ++shlibpath_overrides_runpath=unknown ++version_type=none ++dynamic_linker="$host_os ld.so" ++sys_lib_dlsearch_path_spec="/lib /usr/lib" ++if test "$GCC" = yes; then ++ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then ++ # if the path contains ";" then we assume it to be the separator ++ # otherwise default to the standard path separator (i.e. ":") - it is ++ # assumed that no part of a normal pathname contains ";" but that should ++ # okay in the real world where ";" in dirpaths is itself problematic. ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++else ++ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" ++fi ++need_lib_prefix=unknown ++hardcode_into_libs=no ++ ++# when you set need_version to no, make sure it does not cause -set_version ++# flags to be left without arguments ++need_version=unknown ++ ++case $host_os in ++aix3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' ++ shlibpath_var=LIBPATH ++ ++ # AIX 3 has no versioning support, so we append a major version to the name. ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; ++ ++aix4* | aix5*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ hardcode_into_libs=yes ++ if test "$host_cpu" = ia64; then ++ # AIX 5 supports IA64 ++ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ else ++ # With GCC up to 2.95.x, collect2 would create an import file ++ # for dependence libraries. The import file would start with ++ # the line `#! .'. This would cause the generated library to ++ # depend on `.', always an invalid library. This was fixed in ++ # development snapshots of GCC prior to 3.0. ++ case $host_os in ++ aix4 | aix4.[01] | aix4.[01].*) ++ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' ++ echo ' yes ' ++ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then ++ : ++ else ++ can_build_shared=no ++ fi ++ ;; ++ esac ++ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct ++ # soname into executable. Probably we can add versioning support to ++ # collect2, so additional links can be useful in future. ++ if test "$aix_use_runtimelinking" = yes; then ++ # If using run time linking (on AIX 4.2 or later) use lib.so ++ # instead of lib.a to let people know that these are not ++ # typical AIX shared libraries. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ else ++ # We preserve .a as extension for shared libraries through AIX4.2 ++ # and later when we are not doing run time linking. ++ library_names_spec='${libname}${release}.a $libname.a' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ fi ++ shlibpath_var=LIBPATH ++ fi ++ ;; ++ ++amigaos*) ++ library_names_spec='$libname.ixlibrary $libname.a' ++ # Create ${libname}_ixlibrary.a entries in /sys/libs. ++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ++ ;; ++ ++beos*) ++ library_names_spec='${libname}${shared_ext}' ++ dynamic_linker="$host_os ld.so" ++ shlibpath_var=LIBRARY_PATH ++ ;; ++ ++bsdi[45]*) ++ version_type=linux ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" ++ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" ++ # the default ld.so.conf also contains /usr/contrib/lib and ++ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow ++ # libtool to hard-code these into programs ++ ;; ++ ++cygwin* | mingw* | pw32*) ++ version_type=windows ++ shrext_cmds=".dll" ++ need_version=no ++ need_lib_prefix=no ++ ++ case $GCC,$host_os in ++ yes,cygwin* | yes,mingw* | yes,pw32*) ++ library_names_spec='$libname.dll.a' ++ # DLL is installed to $(libdir)/../bin by postinstall_cmds ++ postinstall_cmds='base_file=`basename \${file}`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ ++ dldir=$destdir/`dirname \$dlpath`~ ++ test -d \$dldir || mkdir -p \$dldir~ ++ $install_prog $dir/$dlname \$dldir/$dlname~ ++ chmod a+x \$dldir/$dlname' ++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ ++ dlpath=$dir/\$dldll~ ++ $rm \$dlpath' ++ shlibpath_overrides_runpath=yes ++ ++ case $host_os in ++ cygwin*) ++ # Cygwin DLLs use 'cyg' prefix rather than 'lib' ++ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ++ ;; ++ mingw*) ++ # MinGW DLLs use traditional 'lib' prefix ++ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then ++ # It is most probably a Windows format PATH printed by ++ # mingw gcc, but we are running on Cygwin. Gcc prints its search ++ # path with ; separators, and with drive letters. We can handle the ++ # drive letters (cygwin fileutils understands them), so leave them, ++ # especially as we might pass files found there to a mingw objdump, ++ # which wouldn't understand a cygwinified path. Ahh. ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ ;; ++ pw32*) ++ # pw32 DLLs use 'pw' prefix rather than 'lib' ++ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ ;; ++ esac ++ ;; ++ ++ *) ++ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ++ ;; ++ esac ++ dynamic_linker='Win32 ld.exe' ++ # FIXME: first we should search . and the directory the executable is in ++ shlibpath_var=PATH ++ ;; ++ ++darwin* | rhapsody*) ++ dynamic_linker="$host_os dyld" ++ version_type=darwin ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' ++ soname_spec='${libname}${release}${major}$shared_ext' ++ shlibpath_overrides_runpath=yes ++ shlibpath_var=DYLD_LIBRARY_PATH ++ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' ++ # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. ++ if test "$GCC" = yes; then ++ sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` ++ else ++ sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' ++ fi ++ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ++ ;; ++ ++dgux*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; ++ ++freebsd1*) ++ dynamic_linker=no ++ ;; ++ ++freebsd* | dragonfly*) ++ # DragonFly does not have aout. When/if they implement a new ++ # versioning mechanism, adjust this. ++ if test -x /usr/bin/objformat; then ++ objformat=`/usr/bin/objformat` ++ else ++ case $host_os in ++ freebsd[123]*) objformat=aout ;; ++ *) objformat=elf ;; ++ esac ++ fi ++ version_type=freebsd-$objformat ++ case $version_type in ++ freebsd-elf*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ need_version=no ++ need_lib_prefix=no ++ ;; ++ freebsd-*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' ++ need_version=yes ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_os in ++ freebsd2*) ++ shlibpath_overrides_runpath=yes ++ ;; ++ freebsd3.[01]* | freebsdelf3.[01]*) ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ ++ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ freebsd*) # from 4.6 on ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ esac ++ ;; ++ ++gnu*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ ;; ++ ++hpux9* | hpux10* | hpux11*) ++ # Give a soname corresponding to the major version so that dld.sl refuses to ++ # link against other versions. ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ case $host_cpu in ++ ia64*) ++ shrext_cmds='.so' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.so" ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ if test "X$HPUX_IA64_MODE" = X32; then ++ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" ++ else ++ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" ++ fi ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ hppa*64*) ++ shrext_cmds='.sl' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ *) ++ shrext_cmds='.sl' ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=SHLIB_PATH ++ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; ++ esac ++ # HP-UX runs *really* slowly unless shared libraries are mode 555. ++ postinstall_cmds='chmod 555 $lib' ++ ;; ++ ++interix3*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ ++irix5* | irix6* | nonstopux*) ++ case $host_os in ++ nonstopux*) version_type=nonstopux ;; ++ *) ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ version_type=linux ++ else ++ version_type=irix ++ fi ;; ++ esac ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' ++ case $host_os in ++ irix5* | nonstopux*) ++ libsuff= shlibsuff= ++ ;; ++ *) ++ case $LD in # libtool.m4 will add one of these switches to LD ++ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") ++ libsuff= shlibsuff= libmagic=32-bit;; ++ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") ++ libsuff=32 shlibsuff=N32 libmagic=N32;; ++ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") ++ libsuff=64 shlibsuff=64 libmagic=64-bit;; ++ *) libsuff= shlibsuff= libmagic=never-match;; ++ esac ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" ++ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" ++ hardcode_into_libs=yes ++ ;; ++ ++# No shared lib support for Linux oldld, aout, or coff. ++linux*oldld* | linux*aout* | linux*coff*) ++ dynamic_linker=no ++ ;; ++ ++# This must be Linux ELF. ++linux* | k*bsd*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ # This implies no fast_install, which is unacceptable. ++ # Some rework will be needed to allow for fast_install ++ # before this can be enabled. ++ hardcode_into_libs=yes ++ ++ # Append ld.so.conf contents to the search path ++ if test -f /etc/ld.so.conf; then ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" ++ fi ++ ++ # We used to test for /lib/ld.so.1 and disable shared libraries on ++ # powerpc, because MkLinux only supported shared libraries with the ++ # GNU dynamic linker. Since this was broken with cross compilers, ++ # most powerpc-linux boxes support dynamic linking these days and ++ # people can always --disable-shared, the test was removed, and we ++ # assume the GNU/Linux dynamic linker is in use. ++ dynamic_linker='GNU/Linux ld.so' ++ ;; ++ ++netbsdelf*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='NetBSD ld.elf_so' ++ ;; ++ ++netbsd*) ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ dynamic_linker='NetBSD (a.out) ld.so' ++ else ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='NetBSD ld.elf_so' ++ fi ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ ++newsos6) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ ;; ++ ++nto-qnx*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ ;; ++ ++openbsd*) ++ version_type=sunos ++ sys_lib_dlsearch_path_spec="/usr/lib" ++ need_lib_prefix=no ++ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. ++ case $host_os in ++ openbsd3.3 | openbsd3.3.*) need_version=yes ;; ++ *) need_version=no ;; ++ esac ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ case $host_os in ++ openbsd2.[89] | openbsd2.[89].*) ++ shlibpath_overrides_runpath=no ++ ;; ++ *) ++ shlibpath_overrides_runpath=yes ++ ;; ++ esac ++ else ++ shlibpath_overrides_runpath=yes ++ fi ++ ;; ++ ++os2*) ++ libname_spec='$name' ++ shrext_cmds=".dll" ++ need_lib_prefix=no ++ library_names_spec='$libname${shared_ext} $libname.a' ++ dynamic_linker='OS/2 ld.exe' ++ shlibpath_var=LIBPATH ++ ;; ++ ++osf3* | osf4* | osf5*) ++ version_type=osf ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" ++ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ++ ;; ++ ++solaris*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ # ldd complains unless libraries are executable ++ postinstall_cmds='chmod +x $lib' ++ ;; ++ ++sunos4*) ++ version_type=sunos ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ if test "$with_gnu_ld" = yes; then ++ need_lib_prefix=no ++ fi ++ need_version=yes ++ ;; ++ ++sysv4 | sysv4.3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_vendor in ++ sni) ++ shlibpath_overrides_runpath=no ++ need_lib_prefix=no ++ export_dynamic_flag_spec='${wl}-Blargedynsym' ++ runpath_var=LD_RUN_PATH ++ ;; ++ siemens) ++ need_lib_prefix=no ++ ;; ++ motorola) ++ need_lib_prefix=no ++ need_version=no ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ++ ;; ++ esac ++ ;; ++ ++sysv4*MP*) ++ if test -d /usr/nec ;then ++ version_type=linux ++ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' ++ soname_spec='$libname${shared_ext}.$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ fi ++ ;; ++ ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ version_type=freebsd-elf ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ if test "$with_gnu_ld" = yes; then ++ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' ++ shlibpath_overrides_runpath=no ++ else ++ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' ++ shlibpath_overrides_runpath=yes ++ case $host_os in ++ sco3.2v5*) ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ++ ;; ++ esac ++ fi ++ sys_lib_dlsearch_path_spec='/usr/lib' ++ ;; ++ ++uts4*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; ++ ++*) ++ dynamic_linker=no ++ ;; ++esac ++echo "$as_me:$LINENO: result: $dynamic_linker" >&5 ++echo "${ECHO_T}$dynamic_linker" >&6 ++test "$dynamic_linker" = no && can_build_shared=no ++ ++variables_saved_for_relink="PATH $shlibpath_var $runpath_var" ++if test "$GCC" = yes; then ++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" ++fi ++ ++echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 ++hardcode_action_F77= ++if test -n "$hardcode_libdir_flag_spec_F77" || \ ++ test -n "$runpath_var_F77" || \ ++ test "X$hardcode_automatic_F77" = "Xyes" ; then ++ ++ # We can hardcode non-existant directories. ++ if test "$hardcode_direct_F77" != no && ++ # If the only mechanism to avoid hardcoding is shlibpath_var, we ++ # have to relink, otherwise we might link with an installed library ++ # when we should be linking with a yet-to-be-installed one ++ ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no && ++ test "$hardcode_minus_L_F77" != no; then ++ # Linking always hardcodes the temporary library directory. ++ hardcode_action_F77=relink ++ else ++ # We can link without hardcoding, and we can hardcode nonexisting dirs. ++ hardcode_action_F77=immediate ++ fi ++else ++ # We cannot hardcode anything, or else we can only hardcode existing ++ # directories. ++ hardcode_action_F77=unsupported ++fi ++echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5 ++echo "${ECHO_T}$hardcode_action_F77" >&6 ++ ++if test "$hardcode_action_F77" = relink; then ++ # Fast installation is not supported ++ enable_fast_install=no ++elif test "$shlibpath_overrides_runpath" = yes || ++ test "$enable_shared" = no; then ++ # Fast installation is not necessary ++ enable_fast_install=needless ++fi ++ ++ ++# The else clause should only fire when bootstrapping the ++# libtool distribution, otherwise you forgot to ship ltmain.sh ++# with your package, and you will get complaints that there are ++# no rules to generate ltmain.sh. ++if test -f "$ltmain"; then ++ # See if we are running on zsh, and set the options which allow our commands through ++ # without removal of \ escapes. ++ if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++ fi ++ # Now quote all the things that may contain metacharacters while being ++ # careful not to overquote the AC_SUBSTed values. We take copies of the ++ # variables and quote the copies for generation of the libtool script. ++ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ ++ SED SHELL STRIP \ ++ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ ++ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ ++ deplibs_check_method reload_flag reload_cmds need_locks \ ++ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ ++ lt_cv_sys_global_symbol_to_c_name_address \ ++ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ ++ old_postinstall_cmds old_postuninstall_cmds \ ++ compiler_F77 \ ++ CC_F77 \ ++ LD_F77 \ ++ lt_prog_compiler_wl_F77 \ ++ lt_prog_compiler_pic_F77 \ ++ lt_prog_compiler_static_F77 \ ++ lt_prog_compiler_no_builtin_flag_F77 \ ++ export_dynamic_flag_spec_F77 \ ++ thread_safe_flag_spec_F77 \ ++ whole_archive_flag_spec_F77 \ ++ enable_shared_with_static_runtimes_F77 \ ++ old_archive_cmds_F77 \ ++ old_archive_from_new_cmds_F77 \ ++ predep_objects_F77 \ ++ postdep_objects_F77 \ ++ predeps_F77 \ ++ postdeps_F77 \ ++ compiler_lib_search_path_F77 \ ++ archive_cmds_F77 \ ++ archive_expsym_cmds_F77 \ ++ postinstall_cmds_F77 \ ++ postuninstall_cmds_F77 \ ++ old_archive_from_expsyms_cmds_F77 \ ++ allow_undefined_flag_F77 \ ++ no_undefined_flag_F77 \ ++ export_symbols_cmds_F77 \ ++ hardcode_libdir_flag_spec_F77 \ ++ hardcode_libdir_flag_spec_ld_F77 \ ++ hardcode_libdir_separator_F77 \ ++ hardcode_automatic_F77 \ ++ module_cmds_F77 \ ++ module_expsym_cmds_F77 \ ++ lt_cv_prog_compiler_c_o_F77 \ ++ exclude_expsyms_F77 \ ++ include_expsyms_F77; do ++ ++ case $var in ++ old_archive_cmds_F77 | \ ++ old_archive_from_new_cmds_F77 | \ ++ archive_cmds_F77 | \ ++ archive_expsym_cmds_F77 | \ ++ module_cmds_F77 | \ ++ module_expsym_cmds_F77 | \ ++ old_archive_from_expsyms_cmds_F77 | \ ++ export_symbols_cmds_F77 | \ ++ extract_expsyms_cmds | reload_cmds | finish_cmds | \ ++ postinstall_cmds | postuninstall_cmds | \ ++ old_postinstall_cmds | old_postuninstall_cmds | \ ++ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) ++ # Double-quote double-evaled strings. ++ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ++ ;; ++ *) ++ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ++ ;; ++ esac ++ done ++ ++ case $lt_echo in ++ *'\$0 --fallback-echo"') ++ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` ++ ;; ++ esac ++ ++cfgfile="$ofile" ++ ++ cat <<__EOF__ >> "$cfgfile" ++# ### BEGIN LIBTOOL TAG CONFIG: $tagname ++ ++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: ++ ++# Shell to use when invoking shell scripts. ++SHELL=$lt_SHELL ++ ++# Whether or not to build shared libraries. ++build_libtool_libs=$enable_shared ++ ++# Whether or not to build static libraries. ++build_old_libs=$enable_static ++ ++# Whether or not to add -lc for building shared libraries. ++build_libtool_need_lc=$archive_cmds_need_lc_F77 ++ ++# Whether or not to disallow shared libs when runtime libs are static ++allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77 ++ ++# Whether or not to optimize for fast installation. ++fast_install=$enable_fast_install ++ ++# The host system. ++host_alias=$host_alias ++host=$host ++host_os=$host_os ++ ++# The build system. ++build_alias=$build_alias ++build=$build ++build_os=$build_os ++ ++# An echo program that does not interpret backslashes. ++echo=$lt_echo ++ ++# The archiver. ++AR=$lt_AR ++AR_FLAGS=$lt_AR_FLAGS ++ ++# A C compiler. ++LTCC=$lt_LTCC ++ ++# LTCC compiler flags. ++LTCFLAGS=$lt_LTCFLAGS ++ ++# A language-specific compiler. ++CC=$lt_compiler_F77 ++ ++# Is the compiler the GNU C compiler? ++with_gcc=$GCC_F77 ++ ++# An ERE matcher. ++EGREP=$lt_EGREP ++ ++# The linker used to build libraries. ++LD=$lt_LD_F77 ++ ++# Whether we need hard or soft links. ++LN_S=$lt_LN_S ++ ++# A BSD-compatible nm program. ++NM=$lt_NM ++ ++# A symbol stripping program ++STRIP=$lt_STRIP ++ ++# Used to examine libraries when file_magic_cmd begins "file" ++MAGIC_CMD=$MAGIC_CMD ++ ++# Used on cygwin: DLL creation program. ++DLLTOOL="$DLLTOOL" ++ ++# Used on cygwin: object dumper. ++OBJDUMP="$OBJDUMP" ++ ++# Used on cygwin: assembler. ++AS="$AS" ++ ++# The name of the directory that contains temporary libtool files. ++objdir=$objdir ++ ++# How to create reloadable object files. ++reload_flag=$lt_reload_flag ++reload_cmds=$lt_reload_cmds ++ ++# How to pass a linker flag through the compiler. ++wl=$lt_lt_prog_compiler_wl_F77 ++ ++# Object file suffix (normally "o"). ++objext="$ac_objext" ++ ++# Old archive suffix (normally "a"). ++libext="$libext" ++ ++# Shared library suffix (normally ".so"). ++shrext_cmds='$shrext_cmds' ++ ++# Executable file suffix (normally ""). ++exeext="$exeext" ++ ++# Additional compiler flags for building library objects. ++pic_flag=$lt_lt_prog_compiler_pic_F77 ++pic_mode=$pic_mode ++ ++# What is the maximum length of a command? ++max_cmd_len=$lt_cv_sys_max_cmd_len ++ ++# Does compiler simultaneously support -c and -o options? ++compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77 ++ ++# Must we lock files when doing compilation? ++need_locks=$lt_need_locks ++ ++# Do we need the lib prefix for modules? ++need_lib_prefix=$need_lib_prefix ++ ++# Do we need a version for libraries? ++need_version=$need_version ++ ++# Whether dlopen is supported. ++dlopen_support=$enable_dlopen ++ ++# Whether dlopen of programs is supported. ++dlopen_self=$enable_dlopen_self ++ ++# Whether dlopen of statically linked programs is supported. ++dlopen_self_static=$enable_dlopen_self_static ++ ++# Compiler flag to prevent dynamic linking. ++link_static_flag=$lt_lt_prog_compiler_static_F77 ++ ++# Compiler flag to turn off builtin functions. ++no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77 ++ ++# Compiler flag to allow reflexive dlopens. ++export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77 ++ ++# Compiler flag to generate shared objects directly from archives. ++whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77 ++ ++# Compiler flag to generate thread-safe objects. ++thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77 ++ ++# Library versioning type. ++version_type=$version_type ++ ++# Format of library name prefix. ++libname_spec=$lt_libname_spec ++ ++# List of archive names. First name is the real one, the rest are links. ++# The last name is the one that the linker finds with -lNAME. ++library_names_spec=$lt_library_names_spec ++ ++# The coded name of the library, if different from the real name. ++soname_spec=$lt_soname_spec ++ ++# Commands used to build and install an old-style archive. ++RANLIB=$lt_RANLIB ++old_archive_cmds=$lt_old_archive_cmds_F77 ++old_postinstall_cmds=$lt_old_postinstall_cmds ++old_postuninstall_cmds=$lt_old_postuninstall_cmds ++ ++# Create an old-style archive from a shared archive. ++old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77 ++ ++# Create a temporary old-style archive to link instead of a shared archive. ++old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77 ++ ++# Commands used to build and install a shared archive. ++archive_cmds=$lt_archive_cmds_F77 ++archive_expsym_cmds=$lt_archive_expsym_cmds_F77 ++postinstall_cmds=$lt_postinstall_cmds ++postuninstall_cmds=$lt_postuninstall_cmds ++ ++# Commands used to build a loadable module (assumed same as above if empty) ++module_cmds=$lt_module_cmds_F77 ++module_expsym_cmds=$lt_module_expsym_cmds_F77 ++ ++# Commands to strip libraries. ++old_striplib=$lt_old_striplib ++striplib=$lt_striplib ++ ++# Dependencies to place before the objects being linked to create a ++# shared library. ++predep_objects=$lt_predep_objects_F77 ++ ++# Dependencies to place after the objects being linked to create a ++# shared library. ++postdep_objects=$lt_postdep_objects_F77 ++ ++# Dependencies to place before the objects being linked to create a ++# shared library. ++predeps=$lt_predeps_F77 ++ ++# Dependencies to place after the objects being linked to create a ++# shared library. ++postdeps=$lt_postdeps_F77 ++ ++# The library search path used internally by the compiler when linking ++# a shared library. ++compiler_lib_search_path=$lt_compiler_lib_search_path_F77 ++ ++# Method to check whether dependent libraries are shared objects. ++deplibs_check_method=$lt_deplibs_check_method ++ ++# Command to use when deplibs_check_method == file_magic. ++file_magic_cmd=$lt_file_magic_cmd ++ ++# Flag that allows shared libraries with undefined symbols to be built. ++allow_undefined_flag=$lt_allow_undefined_flag_F77 ++ ++# Flag that forces no undefined symbols. ++no_undefined_flag=$lt_no_undefined_flag_F77 ++ ++# Commands used to finish a libtool library installation in a directory. ++finish_cmds=$lt_finish_cmds ++ ++# Same as above, but a single script fragment to be evaled but not shown. ++finish_eval=$lt_finish_eval ++ ++# Take the output of nm and produce a listing of raw symbols and C names. ++global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe ++ ++# Transform the output of nm in a proper C declaration ++global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl ++ ++# Transform the output of nm in a C name address pair ++global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address ++ ++# This is the shared library runtime path variable. ++runpath_var=$runpath_var ++ ++# This is the shared library path variable. ++shlibpath_var=$shlibpath_var ++ ++# Is shlibpath searched before the hard-coded library search path? ++shlibpath_overrides_runpath=$shlibpath_overrides_runpath ++ ++# How to hardcode a shared library path into an executable. ++hardcode_action=$hardcode_action_F77 ++ ++# Whether we should hardcode library paths into libraries. ++hardcode_into_libs=$hardcode_into_libs ++ ++# Flag to hardcode \$libdir into a binary during linking. ++# This must work even if \$libdir does not exist. ++hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77 ++ ++# If ld is used when linking, flag to hardcode \$libdir into ++# a binary during linking. This must work even if \$libdir does ++# not exist. ++hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77 ++ ++# Whether we need a single -rpath flag with a separated argument. ++hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77 ++ ++# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the ++# resulting binary. ++hardcode_direct=$hardcode_direct_F77 ++ ++# Set to yes if using the -LDIR flag during linking hardcodes DIR into the ++# resulting binary. ++hardcode_minus_L=$hardcode_minus_L_F77 ++ ++# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into ++# the resulting binary. ++hardcode_shlibpath_var=$hardcode_shlibpath_var_F77 ++ ++# Set to yes if building a shared library automatically hardcodes DIR into the library ++# and all subsequent libraries and executables linked against it. ++hardcode_automatic=$hardcode_automatic_F77 ++ ++# Variables whose values should be saved in libtool wrapper scripts and ++# restored at relink time. ++variables_saved_for_relink="$variables_saved_for_relink" ++ ++# Whether libtool must link a program against all its dependency libraries. ++link_all_deplibs=$link_all_deplibs_F77 ++ ++# Compile-time system search path for libraries ++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec ++ ++# Run-time system search path for libraries ++sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec ++ ++# Fix the shell variable \$srcfile for the compiler. ++fix_srcfile_path="$fix_srcfile_path_F77" ++ ++# Set to yes if exported symbols are required. ++always_export_symbols=$always_export_symbols_F77 ++ ++# The commands to list exported symbols. ++export_symbols_cmds=$lt_export_symbols_cmds_F77 ++ ++# The commands to extract the exported symbol list from a shared archive. ++extract_expsyms_cmds=$lt_extract_expsyms_cmds ++ ++# Symbols that should not be listed in the preloaded symbols. ++exclude_expsyms=$lt_exclude_expsyms_F77 ++ ++# Symbols that must always be exported. ++include_expsyms=$lt_include_expsyms_F77 + ++# ### END LIBTOOL TAG CONFIG: $tagname ++ ++__EOF__ ++ ++ ++else ++ # If there is no Makefile yet, we rely on a make rule to execute ++ # `config.status --recheck' to rerun these tests and create the ++ # libtool script then. ++ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` ++ if test -f "$ltmain_in"; then ++ test -f Makefile && make "$ltmain" ++ fi ++fi ++ ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++CC="$lt_save_CC" ++ ++ else ++ tagname="" ++ fi ++ ;; ++ ++ GCJ) ++ if test -n "$GCJ" && test "X$GCJ" != "Xno"; then ++ ++ ++ ++# Source file extension for Java test sources. ++ac_ext=java ++ ++# Object file extension for compiled Java test sources. ++objext=o ++objext_GCJ=$objext ++ ++# Code to be used in simple compile tests ++lt_simple_compile_test_code="class foo {}\n" ++ ++# Code to be used in simple link tests ++lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n' ++ ++# ltmain only uses $CC for tagged configurations so make sure $CC is set. ++ ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} ++ ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++ ++# Allow CC to be a program name with arguments. ++compiler=$CC ++ ++ ++# save warnings/boilerplate of simple test code ++ac_outfile=conftest.$ac_objext ++printf "$lt_simple_compile_test_code" >conftest.$ac_ext ++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_compiler_boilerplate=`cat conftest.err` ++$rm conftest* ++ ++ac_outfile=conftest.$ac_objext ++printf "$lt_simple_link_test_code" >conftest.$ac_ext ++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_linker_boilerplate=`cat conftest.err` ++$rm conftest* ++ ++ ++# Allow CC to be a program name with arguments. ++lt_save_CC="$CC" ++CC=${GCJ-"gcj"} ++compiler=$CC ++compiler_GCJ=$CC ++for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++ ++ ++# GCJ did not exist at the time GCC didn't implicitly link libc in. ++archive_cmds_need_lc_GCJ=no ++ ++old_archive_cmds_GCJ=$old_archive_cmds ++ ++ ++lt_prog_compiler_no_builtin_flag_GCJ= ++ ++if test "$GCC" = yes; then ++ lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin' ++ ++ ++echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 ++echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 ++if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_rtti_exceptions=no ++ ac_outfile=conftest.$ac_objext ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="-fno-rtti -fno-exceptions" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:15403: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&5 ++ echo "$as_me:15407: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_rtti_exceptions=yes ++ fi ++ fi ++ $rm conftest* ++ ++fi ++echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6 ++ ++if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then ++ lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions" ++else ++ : ++fi ++ ++fi ++ ++lt_prog_compiler_wl_GCJ= ++lt_prog_compiler_pic_GCJ= ++lt_prog_compiler_static_GCJ= ++ ++echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 ++ ++ if test "$GCC" = yes; then ++ lt_prog_compiler_wl_GCJ='-Wl,' ++ lt_prog_compiler_static_GCJ='-static' ++ ++ case $host_os in ++ aix*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ lt_prog_compiler_static_GCJ='-Bstatic' ++ fi ++ ;; ++ ++ amigaos*) ++ # FIXME: we need at least 68020 code to build shared libraries, but ++ # adding the `-m68020' flag to GCC prevents building anything better, ++ # like `-m68040'. ++ lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4' ++ ;; ++ ++ beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ # PIC is the default for these OSes. ++ ;; ++ ++ mingw* | pw32* | os2*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ lt_prog_compiler_pic_GCJ='-DDLL_EXPORT' ++ ;; ++ ++ darwin* | rhapsody*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ lt_prog_compiler_pic_GCJ='-fno-common' ++ ;; ++ ++ interix3*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; ++ ++ msdosdjgpp*) ++ # Just because we use GCC doesn't mean we suddenly get shared libraries ++ # on systems that don't support them. ++ lt_prog_compiler_can_build_shared_GCJ=no ++ enable_shared=no ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ lt_prog_compiler_pic_GCJ=-Kconform_pic ++ fi ++ ;; ++ ++ hpux*) ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ lt_prog_compiler_pic_GCJ='-fPIC' ++ ;; ++ esac ++ ;; ++ ++ *) ++ lt_prog_compiler_pic_GCJ='-fPIC' ++ ;; ++ esac ++ else ++ # PORTME Check for flag to pass linker flags through the system compiler. ++ case $host_os in ++ aix*) ++ lt_prog_compiler_wl_GCJ='-Wl,' ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ lt_prog_compiler_static_GCJ='-Bstatic' ++ else ++ lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp' ++ fi ++ ;; ++ darwin*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ case $cc_basename in ++ xlc*) ++ lt_prog_compiler_pic_GCJ='-qnocommon' ++ lt_prog_compiler_wl_GCJ='-Wl,' ++ ;; ++ esac ++ ;; ++ ++ mingw* | pw32* | os2*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ lt_prog_compiler_pic_GCJ='-DDLL_EXPORT' ++ ;; ++ ++ hpux9* | hpux10* | hpux11*) ++ lt_prog_compiler_wl_GCJ='-Wl,' ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ lt_prog_compiler_pic_GCJ='+Z' ++ ;; ++ esac ++ # Is there a better lt_prog_compiler_static that works with the bundled CC? ++ lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive' ++ ;; ++ ++ irix5* | irix6* | nonstopux*) ++ lt_prog_compiler_wl_GCJ='-Wl,' ++ # PIC (with -KPIC) is the default. ++ lt_prog_compiler_static_GCJ='-non_shared' ++ ;; ++ ++ newsos6) ++ lt_prog_compiler_pic_GCJ='-KPIC' ++ lt_prog_compiler_static_GCJ='-Bstatic' ++ ;; ++ ++ linux* | k*bsd*-gnu) ++ case $cc_basename in ++ icc* | ecc*) ++ lt_prog_compiler_wl_GCJ='-Wl,' ++ lt_prog_compiler_pic_GCJ='-KPIC' ++ lt_prog_compiler_static_GCJ='-static' ++ ;; ++ pgcc* | pgf77* | pgf90* | pgf95*) ++ # Portland Group compilers (*not* the Pentium gcc compiler, ++ # which looks to be a dead project) ++ lt_prog_compiler_wl_GCJ='-Wl,' ++ lt_prog_compiler_pic_GCJ='-fpic' ++ lt_prog_compiler_static_GCJ='-Bstatic' ++ ;; ++ ccc*) ++ lt_prog_compiler_wl_GCJ='-Wl,' ++ # All Alpha code is PIC. ++ lt_prog_compiler_static_GCJ='-non_shared' ++ ;; ++ esac ++ ;; ++ ++ osf3* | osf4* | osf5*) ++ lt_prog_compiler_wl_GCJ='-Wl,' ++ # All OSF/1 code is PIC. ++ lt_prog_compiler_static_GCJ='-non_shared' ++ ;; ++ ++ solaris*) ++ lt_prog_compiler_pic_GCJ='-KPIC' ++ lt_prog_compiler_static_GCJ='-Bstatic' ++ case $cc_basename in ++ f77* | f90* | f95*) ++ lt_prog_compiler_wl_GCJ='-Qoption ld ';; ++ *) ++ lt_prog_compiler_wl_GCJ='-Wl,';; ++ esac ++ ;; ++ ++ sunos4*) ++ lt_prog_compiler_wl_GCJ='-Qoption ld ' ++ lt_prog_compiler_pic_GCJ='-PIC' ++ lt_prog_compiler_static_GCJ='-Bstatic' ++ ;; ++ ++ sysv4 | sysv4.2uw2* | sysv4.3*) ++ lt_prog_compiler_wl_GCJ='-Wl,' ++ lt_prog_compiler_pic_GCJ='-KPIC' ++ lt_prog_compiler_static_GCJ='-Bstatic' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec ;then ++ lt_prog_compiler_pic_GCJ='-Kconform_pic' ++ lt_prog_compiler_static_GCJ='-Bstatic' ++ fi ++ ;; ++ ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ lt_prog_compiler_wl_GCJ='-Wl,' ++ lt_prog_compiler_pic_GCJ='-KPIC' ++ lt_prog_compiler_static_GCJ='-Bstatic' ++ ;; ++ ++ unicos*) ++ lt_prog_compiler_wl_GCJ='-Wl,' ++ lt_prog_compiler_can_build_shared_GCJ=no ++ ;; ++ ++ uts4*) ++ lt_prog_compiler_pic_GCJ='-pic' ++ lt_prog_compiler_static_GCJ='-Bstatic' ++ ;; ++ ++ *) ++ lt_prog_compiler_can_build_shared_GCJ=no ++ ;; ++ esac ++ fi ++ ++echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6 ++ ++# ++# Check to make sure the PIC flag actually works. ++# ++if test -n "$lt_prog_compiler_pic_GCJ"; then ++ ++echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6 ++if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_prog_compiler_pic_works_GCJ=no ++ ac_outfile=conftest.$ac_objext ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="$lt_prog_compiler_pic_GCJ" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:15671: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&5 ++ echo "$as_me:15675: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ lt_prog_compiler_pic_works_GCJ=yes ++ fi ++ fi ++ $rm conftest* ++ ++fi ++echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6 ++ ++if test x"$lt_prog_compiler_pic_works_GCJ" = xyes; then ++ case $lt_prog_compiler_pic_GCJ in ++ "" | " "*) ;; ++ *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;; ++ esac ++else ++ lt_prog_compiler_pic_GCJ= ++ lt_prog_compiler_can_build_shared_GCJ=no ++fi ++ ++fi ++case $host_os in ++ # For platforms which do not support PIC, -DPIC is meaningless: ++ *djgpp*) ++ lt_prog_compiler_pic_GCJ= ++ ;; ++ *) ++ lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ" ++ ;; ++esac ++ ++# ++# Check to make sure the static flag actually works. ++# ++wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\" ++echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6 ++if test "${lt_prog_compiler_static_works_GCJ+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_prog_compiler_static_works_GCJ=no ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS $lt_tmp_static_flag" ++ printf "$lt_simple_link_test_code" > conftest.$ac_ext ++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then ++ # The linker can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ if test -s conftest.err; then ++ # Append any errors to the config.log. ++ cat conftest.err 1>&5 ++ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if diff conftest.exp conftest.er2 >/dev/null; then ++ lt_prog_compiler_static_works_GCJ=yes ++ fi ++ else ++ lt_prog_compiler_static_works_GCJ=yes ++ fi ++ fi ++ $rm conftest* ++ LDFLAGS="$save_LDFLAGS" ++ ++fi ++echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_GCJ" >&5 ++echo "${ECHO_T}$lt_prog_compiler_static_works_GCJ" >&6 ++ ++if test x"$lt_prog_compiler_static_works_GCJ" = xyes; then ++ : ++else ++ lt_prog_compiler_static_GCJ= ++fi ++ ++ ++echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 ++if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_c_o_GCJ=no ++ $rm -r conftest 2>/dev/null ++ mkdir conftest ++ cd conftest ++ mkdir out ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ lt_compiler_flag="-o out/conftest2.$ac_objext" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:15775: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>out/conftest.err) ++ ac_status=$? ++ cat out/conftest.err >&5 ++ echo "$as_me:15779: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s out/conftest2.$ac_objext ++ then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_c_o_GCJ=yes ++ fi ++ fi ++ chmod u+w . 2>&5 ++ $rm conftest* ++ # SGI C++ compiler will create directory out/ii_files/ for ++ # template instantiation ++ test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files ++ $rm out/* && rmdir out ++ cd .. ++ rmdir conftest ++ $rm conftest* ++ ++fi ++echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6 ++ ++ ++hard_links="nottested" ++if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then ++ # do not overwrite the value of need_locks provided by the user ++ echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 ++ hard_links=yes ++ $rm conftest* ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ touch conftest.a ++ ln conftest.a conftest.b 2>&5 || hard_links=no ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ echo "$as_me:$LINENO: result: $hard_links" >&5 ++echo "${ECHO_T}$hard_links" >&6 ++ if test "$hard_links" = no; then ++ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 ++echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} ++ need_locks=warn ++ fi ++else ++ need_locks=no ++fi ++ ++echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 ++ ++ runpath_var= ++ allow_undefined_flag_GCJ= ++ enable_shared_with_static_runtimes_GCJ=no ++ archive_cmds_GCJ= ++ archive_expsym_cmds_GCJ= ++ old_archive_From_new_cmds_GCJ= ++ old_archive_from_expsyms_cmds_GCJ= ++ export_dynamic_flag_spec_GCJ= ++ whole_archive_flag_spec_GCJ= ++ thread_safe_flag_spec_GCJ= ++ hardcode_libdir_flag_spec_GCJ= ++ hardcode_libdir_flag_spec_ld_GCJ= ++ hardcode_libdir_separator_GCJ= ++ hardcode_direct_GCJ=no ++ hardcode_minus_L_GCJ=no ++ hardcode_shlibpath_var_GCJ=unsupported ++ link_all_deplibs_GCJ=unknown ++ hardcode_automatic_GCJ=no ++ module_cmds_GCJ= ++ module_expsym_cmds_GCJ= ++ always_export_symbols_GCJ=no ++ export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ # include_expsyms should be a list of space-separated symbols to be *always* ++ # included in the symbol list ++ include_expsyms_GCJ= ++ # exclude_expsyms can be an extended regexp of symbols to exclude ++ # it will be wrapped by ` (' and `)$', so one must not match beginning or ++ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', ++ # as well as any symbol that contains `d'. ++ exclude_expsyms_GCJ="_GLOBAL_OFFSET_TABLE_" ++ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out ++ # platforms (ab)use it in PIC code, but their linkers get confused if ++ # the symbol is explicitly referenced. Since portable code cannot ++ # rely on this symbol name, it's probably fine to never include it in ++ # preloaded symbol tables. ++ extract_expsyms_cmds= ++ # Just being paranoid about ensuring that cc_basename is set. ++ for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++ ++ case $host_os in + cygwin* | mingw* | pw32*) +- # hardcode_libdir_flag_spec is actually meaningless, as there is +- # no search path for DLLs. +- hardcode_libdir_flag_spec='-L$libdir' +- allow_undefined_flag=unsupported +- always_export_symbols=yes +- +- extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ +- sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ +- test -f $output_objdir/impgen.exe || (cd $output_objdir && \ +- if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ +- else $CC -o impgen impgen.c ; fi)~ +- $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' +- +- old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' +- +- # cygwin and mingw dlls have different entry points and sets of symbols +- # to exclude. +- # FIXME: what about values for MSVC? +- dll_entry=__cygwin_dll_entry@12 +- dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ ++ # FIXME: the MSVC++ port hasn't been tested in a loooong time ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ if test "$GCC" != yes; then ++ with_gnu_ld=no ++ fi ++ ;; ++ interix*) ++ # we just hope/assume this is gcc and not c89 (= MSVC++) ++ with_gnu_ld=yes ++ ;; ++ openbsd*) ++ with_gnu_ld=no ++ ;; ++ esac ++ ++ ld_shlibs_GCJ=yes ++ if test "$with_gnu_ld" = yes; then ++ # If archive_cmds runs LD, not CC, wlarc should be empty ++ wlarc='${wl}' ++ ++ # Set some defaults for GNU ld with shared library support. These ++ # are reset later if shared libraries are not supported. Putting them ++ # here allows them to be overridden if necessary. ++ runpath_var=LD_RUN_PATH ++ hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir' ++ export_dynamic_flag_spec_GCJ='${wl}--export-dynamic' ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then ++ whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ whole_archive_flag_spec_GCJ= ++ fi ++ supports_anon_versioning=no ++ case `$LD -v 2>/dev/null` in ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 ++ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... ++ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... ++ *\ 2.11.*) ;; # other 2.11 versions ++ *) supports_anon_versioning=yes ;; ++ esac ++ ++ # See if GNU ld supports shared libraries. + case $host_os in +- mingw*) +- # mingw values +- dll_entry=_DllMainCRTStartup@12 +- dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ ++ aix3* | aix4* | aix5*) ++ # On AIX/PPC, the GNU linker is very broken ++ if test "$host_cpu" != ia64; then ++ ld_shlibs_GCJ=no ++ cat <&2 ++ ++*** Warning: the GNU linker, at least up to release 2.9.1, is reported ++*** to be unable to reliably create shared libraries on AIX. ++*** Therefore, libtool is disabling shared libraries support. If you ++*** really care for shared libraries, you may want to modify your PATH ++*** so that a non-GNU linker is found, and then restart. ++ ++EOF ++ fi ++ ;; ++ ++ amigaos*) ++ archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ hardcode_libdir_flag_spec_GCJ='-L$libdir' ++ hardcode_minus_L_GCJ=yes ++ ++ # Samuel A. Falvo II reports ++ # that the semantics of dynamic libraries on AmigaOS, at least up ++ # to version 4, is to share data among multiple programs linked ++ # with the same dynamic library. Since this doesn't match the ++ # behavior of shared libraries on other platforms, we can't use ++ # them. ++ ld_shlibs_GCJ=no ++ ;; ++ ++ beos*) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ allow_undefined_flag_GCJ=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ else ++ ld_shlibs_GCJ=no ++ fi ++ ;; ++ ++ cygwin* | mingw* | pw32*) ++ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless, ++ # as there is no search path for DLLs. ++ hardcode_libdir_flag_spec_GCJ='-L$libdir' ++ allow_undefined_flag_GCJ=unsupported ++ always_export_symbols_GCJ=no ++ enable_shared_with_static_runtimes_GCJ=yes ++ export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' ++ ++ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then ++ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ # If the export-symbols file already is a .def file (1st line ++ # is EXPORTS), use it as is; otherwise, prepend... ++ archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ cp $export_symbols $output_objdir/$soname.def; ++ else ++ echo EXPORTS > $output_objdir/$soname.def; ++ cat $export_symbols >> $output_objdir/$soname.def; ++ fi~ ++ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ ld_shlibs_GCJ=no ++ fi ++ ;; ++ ++ interix3*) ++ hardcode_direct_GCJ=no ++ hardcode_shlibpath_var_GCJ=no ++ hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec_GCJ='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; +- esac + +- # mingw and cygwin differ, and it's simplest to just exclude the union +- # of the two symbol sets. +- dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 +- +- # recent cygwin and mingw systems supply a stub DllMain which the user +- # can override, but on older systems we have to supply one (in ltdll.c) +- if test "x$lt_cv_need_dllmain" = "xyes"; then +- ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " +- ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < [$]0 > $output_objdir/$soname-ltdll.c~ +- test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' +- else +- ltdll_obj= +- ltdll_cmds= +- fi ++ linux* | k*bsd*-gnu) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ tmp_addflag= ++ case $cc_basename,$host_cpu in ++ pgcc*) # Portland Group C compiler ++ whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag' ++ ;; ++ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers ++ whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag -Mnomain' ;; ++ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 ++ tmp_addflag=' -i_dynamic' ;; ++ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 ++ tmp_addflag=' -i_dynamic -nofor_main' ;; ++ ifc* | ifort*) # Intel Fortran compiler ++ tmp_addflag=' -nofor_main' ;; ++ esac ++ archive_cmds_GCJ='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + +- # Extract the symbol export list from an `--export-all' def file, +- # then regenerate the def file from the symbol export list, so that +- # the compiled dll only exports the symbol export list. +- # Be careful not to strip the DATA tag left be newer dlltools. +- export_symbols_cmds="$ltdll_cmds"' +- $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ +- sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' +- +- # If the export-symbols file already is a .def file (1st line +- # is EXPORTS), use it as is. +- # If DATA tags from a recent dlltool are present, honour them! +- archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then +- cp $export_symbols $output_objdir/$soname-def; +- else +- echo EXPORTS > $output_objdir/$soname-def; +- _lt_hint=1; +- cat $export_symbols | while read symbol; do +- set dummy \$symbol; +- case \$# in +- 2) echo " \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; +- *) echo " \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;; +- esac; +- _lt_hint=`expr 1 + \$_lt_hint`; +- done; +- fi~ +- '"$ltdll_cmds"' +- $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ +- $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ +- $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ +- $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ +- $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' +- ;; ++ if test $supports_anon_versioning = yes; then ++ archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ $echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' ++ fi ++ link_all_deplibs_GCJ=no ++ else ++ ld_shlibs_GCJ=no ++ fi ++ ;; + +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' +- wlarc= +- else +- archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- fi +- ;; ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' ++ wlarc= ++ else ++ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ fi ++ ;; + +- solaris* | sysv5*) +- if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then +- ld_shlibs=no +- cat <&2 ++ solaris*) ++ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then ++ ld_shlibs_GCJ=no ++ cat <&2 + + *** Warning: The releases 2.8.* of the GNU linker cannot reliably + *** create shared libraries on Solaris systems. Therefore, libtool +@@ -3127,469 +16056,804 @@ + *** used, and then restart. + + EOF +- elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- ld_shlibs=no +- fi +- ;; ++ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ ld_shlibs_GCJ=no ++ fi ++ ;; + +- sunos4*) +- archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- wlarc= +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- ;; ++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) ++ case `$LD -v 2>&1` in ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ++ ld_shlibs_GCJ=no ++ cat <<_LT_EOF 1>&2 + +- *) +- if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- ld_shlibs=no +- fi +- ;; +- esac ++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not ++*** reliably create shared libraries on SCO systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.16.91.0.3 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. + +- if test "$ld_shlibs" = yes; then +- runpath_var=LD_RUN_PATH +- hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' +- export_dynamic_flag_spec='${wl}--export-dynamic' +- case $host_os in +- cygwin* | mingw* | pw32*) +- # dlltool doesn't understand --whole-archive et. al. +- whole_archive_flag_spec= ++_LT_EOF ++ ;; ++ *) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' ++ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' ++ archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' ++ else ++ ld_shlibs_GCJ=no ++ fi ++ ;; ++ esac ++ ;; ++ ++ sunos4*) ++ archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ wlarc= ++ hardcode_direct_GCJ=yes ++ hardcode_shlibpath_var_GCJ=no + ;; ++ + *) +- # ancient GNU ld didn't support --whole-archive et. al. +- if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then +- whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else +- whole_archive_flag_spec= ++ ld_shlibs_GCJ=no + fi + ;; + esac +- fi +-else +- # PORTME fill in a description of your system's linker (not GNU ld) +- case $host_os in +- aix3*) +- allow_undefined_flag=unsupported +- always_export_symbols=yes +- archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' +- # Note: this linker hardcodes the directories in LIBPATH if there +- # are no directories specified by -L. +- hardcode_minus_L=yes +- if test "$GCC" = yes && test -z "$link_static_flag"; then +- # Neither direct hardcoding nor static linking is supported with a +- # broken collect2. +- hardcode_direct=unsupported +- fi +- ;; +- +- aix4* | aix5*) +- # When large executables or shared objects are built, AIX ld can +- # have problems creating the table of contents. If linking a library +- # or program results in "error TOC overflow" add -mminimal-toc to +- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not +- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + +- archive_cmds='' +- hardcode_libdir_separator=':' +- if test "$GCC" = yes; then +- collect2name=`${CC} -print-prog-name=collect2` +- if test -f "$collect2name" && \ +- strings "$collect2name" | grep resolve_lib_name >/dev/null +- then +- # We have reworked collect2 +- hardcode_direct=yes +- else +- # We have old collect2 +- hardcode_direct=unsupported +- # It fails to find uninstalled libraries when the uninstalled +- # path is not listed in the libpath. Setting hardcode_minus_L +- # to unsupported forces relinking +- hardcode_minus_L=yes +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_libdir_separator= ++ if test "$ld_shlibs_GCJ" = no; then ++ runpath_var= ++ hardcode_libdir_flag_spec_GCJ= ++ export_dynamic_flag_spec_GCJ= ++ whole_archive_flag_spec_GCJ= ++ fi ++ else ++ # PORTME fill in a description of your system's linker (not GNU ld) ++ case $host_os in ++ aix3*) ++ allow_undefined_flag_GCJ=unsupported ++ always_export_symbols_GCJ=yes ++ archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' ++ # Note: this linker hardcodes the directories in LIBPATH if there ++ # are no directories specified by -L. ++ hardcode_minus_L_GCJ=yes ++ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then ++ # Neither direct hardcoding nor static linking is supported with a ++ # broken collect2. ++ hardcode_direct_GCJ=unsupported + fi +- shared_flag='-shared' +- else ++ ;; ++ ++ aix4* | aix5*) + if test "$host_cpu" = ia64; then +- shared_flag='-G' ++ # On IA64, the linker does run time linking by default, so we don't ++ # have to do anything special. ++ aix_use_runtimelinking=no ++ exp_sym_flag='-Bexport' ++ no_entry_flag="" + else +- shared_flag='${wl}-bM:SRE' ++ # If we're using GNU nm, then we don't want the "-C" option. ++ # -C means demangle to AIX nm, but means don't demangle with GNU nm ++ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then ++ export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' ++ else ++ export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' ++ fi ++ aix_use_runtimelinking=no ++ ++ # Test if we are trying to use run time linking or normal ++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we ++ # need to do runtime linking. ++ case $host_os in aix4.[23]|aix4.[23].*|aix5*) ++ for ld_flag in $LDFLAGS; do ++ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then ++ aix_use_runtimelinking=yes ++ break ++ fi ++ done ++ ;; ++ esac ++ ++ exp_sym_flag='-bexport' ++ no_entry_flag='-bnoentry' + fi +- hardcode_direct=yes +- fi + +- if test "$host_cpu" = ia64; then +- # On IA64, the linker does run time linking by default, so we don't +- # have to do anything special. +- aix_use_runtimelinking=no +- exp_sym_flag='-Bexport' +- no_entry_flag="" +- else +- # Test if we are trying to use run time linking, or normal AIX style linking. +- # If -brtl is somewhere in LDFLAGS, we need to do run time linking. +- aix_use_runtimelinking=no +- for ld_flag in $LDFLAGS; do +- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl" ); then +- aix_use_runtimelinking=yes +- break +- fi +- done +- exp_sym_flag='-bexport' +- no_entry_flag='-bnoentry' +- fi +- # It seems that -bexpall can do strange things, so it is better to +- # generate a list of symbols to export. +- always_export_symbols=yes +- if test "$aix_use_runtimelinking" = yes; then +- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib' +- allow_undefined_flag=' -Wl,-G' +- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" +- else +- if test "$host_cpu" = ia64; then +- hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' +- allow_undefined_flag="-znodefs" +- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" +- else +- hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib' +- # Warning - without using the other run time loading flags, -berok will +- # link without error, but may produce a broken library. +- allow_undefined_flag='${wl}-berok' +- # This is a bit strange, but is similar to how AIX traditionally builds +- # it's shared libraries. +- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname' ++ # When large executables or shared objects are built, AIX ld can ++ # have problems creating the table of contents. If linking a library ++ # or program results in "error TOC overflow" add -mminimal-toc to ++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not ++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. ++ ++ archive_cmds_GCJ='' ++ hardcode_direct_GCJ=yes ++ hardcode_libdir_separator_GCJ=':' ++ link_all_deplibs_GCJ=yes ++ ++ if test "$GCC" = yes; then ++ case $host_os in aix4.[012]|aix4.[012].*) ++ # We only want to do this on AIX 4.2 and lower, the check ++ # below for broken collect2 doesn't work under 4.3+ ++ collect2name=`${CC} -print-prog-name=collect2` ++ if test -f "$collect2name" && \ ++ strings "$collect2name" | grep resolve_lib_name >/dev/null ++ then ++ # We have reworked collect2 ++ hardcode_direct_GCJ=yes ++ else ++ # We have old collect2 ++ hardcode_direct_GCJ=unsupported ++ # It fails to find uninstalled libraries when the uninstalled ++ # path is not listed in the libpath. Setting hardcode_minus_L ++ # to unsupported forces relinking ++ hardcode_minus_L_GCJ=yes ++ hardcode_libdir_flag_spec_GCJ='-L$libdir' ++ hardcode_libdir_separator_GCJ= ++ fi ++ ;; ++ esac ++ shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi ++ else ++ # not using gcc ++ if test "$host_cpu" = ia64; then ++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release ++ # chokes on -Wl,-G. The following line is correct: ++ shared_flag='-G' ++ else ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag='${wl}-G' ++ else ++ shared_flag='${wl}-bM:SRE' ++ fi ++ fi + fi +- fi +- ;; + +- amigaos*) +- archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_minus_L=yes +- # see comment about different semantics on the GNU ld section +- ld_shlibs=no +- ;; ++ # It seems that -bexpall does not export symbols beginning with ++ # underscore (_), so it is better to generate a list of symbols to export. ++ always_export_symbols_GCJ=yes ++ if test "$aix_use_runtimelinking" = yes; then ++ # Warning - without using the other runtime loading flags (-brtl), ++ # -berok will link without error, but may produce a broken library. ++ allow_undefined_flag_GCJ='-berok' ++ # Determine the default libpath from the value encoded in an empty executable. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +- cygwin* | mingw* | pw32*) +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- # hardcode_libdir_flag_spec is actually meaningless, as there is +- # no search path for DLLs. +- hardcode_libdir_flag_spec=' ' +- allow_undefined_flag=unsupported +- # Tell ltmain to make .lib files, not .a files. +- libext=lib +- # FIXME: Setting linknames here is a bad hack. +- archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' +- # The linker will automatically build a .lib file if we build a DLL. +- old_archive_from_new_cmds='true' +- # FIXME: Should let the user specify the lib program. +- old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' +- fix_srcfile_path='`cygpath -w "$srcfile"`' +- ;; +- +- darwin* | rhapsody*) +- allow_undefined_flag='-undefined suppress' +- # FIXME: Relying on posixy $() will cause problems for +- # cross-compilation, but unfortunately the echo tests do not +- # yet detect zsh echo's removal of \ escapes. +- archive_cmds='$CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linkopts -install_name $rpath/$soname $(test -n "$verstring" -a x$verstring != x0.0 && echo $verstring)' +- # We need to add '_' to the symbols in $export_symbols first +- #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols' +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- whole_archive_flag_spec='-all_load $convenience' +- ;; +- +- freebsd1*) +- ld_shlibs=no +- ;; +- +- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor +- # support. Future versions do this automatically, but an explicit c++rt0.o +- # does not break anything, and helps significantly (at the cost of a little +- # extra space). +- freebsd2.2*) +- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' +- hardcode_libdir_flag_spec='-R$libdir' +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- ;; ++int ++main () ++{ + +- # Unfortunately, older versions of FreeBSD 2 do not have this feature. +- freebsd2*) +- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct=yes +- hardcode_minus_L=yes +- hardcode_shlibpath_var=no +- ;; ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'`; fi ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++fi ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ ++ hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" ++ archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ else ++ if test "$host_cpu" = ia64; then ++ hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib' ++ allow_undefined_flag_GCJ="-z nodefs" ++ archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" ++ else ++ # Determine the default libpath from the value encoded in an empty executable. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +- # FreeBSD 3 and greater uses gcc -shared to do shared libraries. +- freebsd*) +- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec='-R$libdir' +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- ;; ++int ++main () ++{ + +- hpux9* | hpux10* | hpux11*) +- case $host_os in +- hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; +- *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;; +- esac +- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator=: +- hardcode_direct=yes +- hardcode_minus_L=yes # Not in the search PATH, but as the default +- # location of the library. +- export_dynamic_flag_spec='${wl}-E' +- ;; ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'`; fi ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++fi ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ ++ hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" ++ # Warning - without using the other run time loading flags, ++ # -berok will link without error, but may produce a broken library. ++ no_undefined_flag_GCJ=' ${wl}-bernotok' ++ allow_undefined_flag_GCJ=' ${wl}-berok' ++ # Exported symbols can be pulled into shared objects from archives ++ whole_archive_flag_spec_GCJ='$convenience' ++ archive_cmds_need_lc_GCJ=yes ++ # This is similar to how AIX traditionally builds its shared libraries. ++ archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ fi ++ fi ++ ;; + +- irix5* | irix6*) +- if test "$GCC" = yes; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- fi +- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator=: +- link_all_deplibs=yes +- ;; ++ amigaos*) ++ archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ hardcode_libdir_flag_spec_GCJ='-L$libdir' ++ hardcode_minus_L_GCJ=yes ++ # see comment about different semantics on the GNU ld section ++ ld_shlibs_GCJ=no ++ ;; + +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out ++ bsdi[45]*) ++ export_dynamic_flag_spec_GCJ=-rdynamic ++ ;; ++ ++ cygwin* | mingw* | pw32*) ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ # hardcode_libdir_flag_spec is actually meaningless, as there is ++ # no search path for DLLs. ++ hardcode_libdir_flag_spec_GCJ=' ' ++ allow_undefined_flag_GCJ=unsupported ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' ++ # The linker will automatically build a .lib file if we build a DLL. ++ old_archive_From_new_cmds_GCJ='true' ++ # FIXME: Should let the user specify the lib program. ++ old_archive_cmds_GCJ='lib /OUT:$oldlib$oldobjs$old_deplibs' ++ fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`' ++ enable_shared_with_static_runtimes_GCJ=yes ++ ;; ++ ++ darwin* | rhapsody*) ++ case $host_os in ++ rhapsody* | darwin1.[012]) ++ allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress' ++ ;; ++ *) # Darwin 1.3 on ++ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then ++ allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ else ++ case ${MACOSX_DEPLOYMENT_TARGET} in ++ 10.[012]) ++ allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ ;; ++ 10.*) ++ allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup' ++ ;; ++ esac ++ fi ++ ;; ++ esac ++ archive_cmds_need_lc_GCJ=no ++ hardcode_direct_GCJ=no ++ hardcode_automatic_GCJ=yes ++ hardcode_shlibpath_var_GCJ=unsupported ++ whole_archive_flag_spec_GCJ='' ++ link_all_deplibs_GCJ=yes ++ if test "$GCC" = yes ; then ++ output_verbose_link_cmd='echo' ++ archive_cmds_GCJ='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' ++ module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else +- archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF ++ case $cc_basename in ++ xlc*) ++ output_verbose_link_cmd='echo' ++ archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' ++ module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ ;; ++ *) ++ ld_shlibs_GCJ=no ++ ;; ++ esac + fi +- hardcode_libdir_flag_spec='-R$libdir' +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- ;; ++ ;; + +- newsos6) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts' +- hardcode_direct=yes +- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator=: +- hardcode_shlibpath_var=no +- ;; ++ dgux*) ++ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec_GCJ='-L$libdir' ++ hardcode_shlibpath_var_GCJ=no ++ ;; + +- openbsd*) +- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec='-R$libdir' +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- ;; ++ freebsd1*) ++ ld_shlibs_GCJ=no ++ ;; + +- os2*) +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_minus_L=yes +- allow_undefined_flag=unsupported +- archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' +- old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' +- ;; ++ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor ++ # support. Future versions do this automatically, but an explicit c++rt0.o ++ # does not break anything, and helps significantly (at the cost of a little ++ # extra space). ++ freebsd2.2*) ++ archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' ++ hardcode_libdir_flag_spec_GCJ='-R$libdir' ++ hardcode_direct_GCJ=yes ++ hardcode_shlibpath_var_GCJ=no ++ ;; + +- osf3*) +- if test "$GCC" = yes; then +- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- allow_undefined_flag=' -expect_unresolved \*' +- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- fi +- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator=: +- ;; ++ # Unfortunately, older versions of FreeBSD 2 do not have this feature. ++ freebsd2*) ++ archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct_GCJ=yes ++ hardcode_minus_L_GCJ=yes ++ hardcode_shlibpath_var_GCJ=no ++ ;; + +- osf4* | osf5*) # as osf3* with the addition of -msym flag +- if test "$GCC" = yes; then +- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' +- else +- allow_undefined_flag=' -expect_unresolved \*' +- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ +- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' ++ # FreeBSD 3 and greater uses gcc -shared to do shared libraries. ++ freebsd* | dragonfly*) ++ archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' ++ hardcode_libdir_flag_spec_GCJ='-R$libdir' ++ hardcode_direct_GCJ=yes ++ hardcode_shlibpath_var_GCJ=no ++ ;; + +- #Both c and cxx compiler support -rpath directly +- hardcode_libdir_flag_spec='-rpath $libdir' +- fi +- hardcode_libdir_separator=: +- ;; ++ hpux9*) ++ if test "$GCC" = yes; then ++ archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ else ++ archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ fi ++ hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator_GCJ=: ++ hardcode_direct_GCJ=yes ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L_GCJ=yes ++ export_dynamic_flag_spec_GCJ='${wl}-E' ++ ;; + +- sco3.2v5*) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var=no +- runpath_var=LD_RUN_PATH +- hardcode_runpath_var=yes +- ;; ++ hpux10*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ if test "$with_gnu_ld" = no; then ++ hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator_GCJ=: ++ ++ hardcode_direct_GCJ=yes ++ export_dynamic_flag_spec_GCJ='${wl}-E' ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L_GCJ=yes ++ fi ++ ;; + +- solaris*) +- no_undefined_flag=' -z defs' +- # $CC -shared without GNU ld will not create a library from C++ +- # object files and a static libstdc++, better avoid it by now +- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' +- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +- hardcode_libdir_flag_spec='-R$libdir' +- hardcode_shlibpath_var=no +- case $host_os in +- solaris2.[0-5] | solaris2.[0-5].*) ;; +- *) # Supported since Solaris 2.6 (maybe 2.5.1?) +- whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; +- esac +- link_all_deplibs=yes +- ;; ++ hpux11*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ else ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ fi ++ if test "$with_gnu_ld" = no; then ++ hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator_GCJ=: ++ ++ case $host_cpu in ++ hppa*64*|ia64*) ++ hardcode_libdir_flag_spec_ld_GCJ='+b $libdir' ++ hardcode_direct_GCJ=no ++ hardcode_shlibpath_var_GCJ=no ++ ;; ++ *) ++ hardcode_direct_GCJ=yes ++ export_dynamic_flag_spec_GCJ='${wl}-E' ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L_GCJ=yes ++ ;; ++ esac ++ fi ++ ;; + +- sunos4*) +- if test "x$host_vendor" = xsequent; then +- # Use $CC to link under sequent, because it throws in some extra .o +- # files that make .init and .fini sections work. +- archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' +- fi +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_direct=yes +- hardcode_minus_L=yes +- hardcode_shlibpath_var=no +- ;; ++ irix5* | irix6* | nonstopux*) ++ if test "$GCC" = yes; then ++ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir' ++ fi ++ hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator_GCJ=: ++ link_all_deplibs_GCJ=yes ++ ;; + +- sysv4) +- if test "x$host_vendor" = xsno; then +- archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linkopts' +- hardcode_direct=yes # is this really true??? +- else +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct=no #Motorola manual says yes, but my tests say they lie +- fi +- runpath_var='LD_RUN_PATH' +- hardcode_shlibpath_var=no +- ;; ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out ++ else ++ archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF ++ fi ++ hardcode_libdir_flag_spec_GCJ='-R$libdir' ++ hardcode_direct_GCJ=yes ++ hardcode_shlibpath_var_GCJ=no ++ ;; + +- sysv4.3*) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var=no +- export_dynamic_flag_spec='-Bexport' +- ;; +- +- sysv5*) +- no_undefined_flag=' -z text' +- # $CC -shared without GNU ld will not create a library from C++ +- # object files and a static libstdc++, better avoid it by now +- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' +- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +- hardcode_libdir_flag_spec= +- hardcode_shlibpath_var=no +- runpath_var='LD_RUN_PATH' +- ;; ++ newsos6) ++ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct_GCJ=yes ++ hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator_GCJ=: ++ hardcode_shlibpath_var_GCJ=no ++ ;; + +- uts4*) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_shlibpath_var=no +- ;; ++ openbsd*) ++ hardcode_direct_GCJ=yes ++ hardcode_shlibpath_var_GCJ=no ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' ++ hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec_GCJ='${wl}-E' ++ else ++ case $host_os in ++ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) ++ archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec_GCJ='-R$libdir' ++ ;; ++ *) ++ archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' ++ ;; ++ esac ++ fi ++ ;; + +- dgux*) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_shlibpath_var=no +- ;; ++ os2*) ++ hardcode_libdir_flag_spec_GCJ='-L$libdir' ++ hardcode_minus_L_GCJ=yes ++ allow_undefined_flag_GCJ=unsupported ++ archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' ++ old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ++ ;; + +- sysv4*MP*) +- if test -d /usr/nec; then +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var=no +- runpath_var=LD_RUN_PATH +- hardcode_runpath_var=yes +- ld_shlibs=yes +- fi +- ;; ++ osf3*) ++ if test "$GCC" = yes; then ++ allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ allow_undefined_flag_GCJ=' -expect_unresolved \*' ++ archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ fi ++ hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator_GCJ=: ++ ;; + +- sysv4.2uw2*) +- archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct=yes +- hardcode_minus_L=no +- hardcode_shlibpath_var=no +- hardcode_runpath_var=yes +- runpath_var=LD_RUN_PATH +- ;; ++ osf4* | osf5*) # as osf3* with the addition of -msym flag ++ if test "$GCC" = yes; then ++ allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' ++ else ++ allow_undefined_flag_GCJ=' -expect_unresolved \*' ++ archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ ++ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' ++ ++ # Both c and cxx compiler support -rpath directly ++ hardcode_libdir_flag_spec_GCJ='-rpath $libdir' ++ fi ++ hardcode_libdir_separator_GCJ=: ++ ;; ++ ++ solaris*) ++ no_undefined_flag_GCJ=' -z text' ++ if test "$GCC" = yes; then ++ wlarc='${wl}' ++ archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ ++ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' ++ else ++ wlarc='' ++ archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ ++ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' ++ fi ++ hardcode_libdir_flag_spec_GCJ='-R$libdir' ++ hardcode_shlibpath_var_GCJ=no ++ case $host_os in ++ solaris2.[0-5] | solaris2.[0-5].*) ;; ++ *) ++ # The compiler driver will combine linker options so we ++ # cannot just pass the convience library names through ++ # without $wl, iff we do not link with $LD. ++ # Luckily, gcc supports the same syntax we need for Sun Studio. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ case $wlarc in ++ '') ++ whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;; ++ *) ++ whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; ++ esac ;; ++ esac ++ link_all_deplibs_GCJ=yes ++ ;; ++ ++ sunos4*) ++ if test "x$host_vendor" = xsequent; then ++ # Use $CC to link under sequent, because it throws in some extra .o ++ # files that make .init and .fini sections work. ++ archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ hardcode_libdir_flag_spec_GCJ='-L$libdir' ++ hardcode_direct_GCJ=yes ++ hardcode_minus_L_GCJ=yes ++ hardcode_shlibpath_var_GCJ=no ++ ;; ++ ++ sysv4) ++ case $host_vendor in ++ sni) ++ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct_GCJ=yes # is this really true??? ++ ;; ++ siemens) ++ ## LD is ld it makes a PLAMLIB ++ ## CC just makes a GrossModule. ++ archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags' ++ reload_cmds_GCJ='$CC -r -o $output$reload_objs' ++ hardcode_direct_GCJ=no ++ ;; ++ motorola) ++ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie ++ ;; ++ esac ++ runpath_var='LD_RUN_PATH' ++ hardcode_shlibpath_var_GCJ=no ++ ;; ++ ++ sysv4.3*) ++ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_shlibpath_var_GCJ=no ++ export_dynamic_flag_spec_GCJ='-Bexport' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_shlibpath_var_GCJ=no ++ runpath_var=LD_RUN_PATH ++ hardcode_runpath_var=yes ++ ld_shlibs_GCJ=yes ++ fi ++ ;; + +- sysv5uw7* | unixware7*) +- no_undefined_flag='${wl}-z ${wl}text' +- if test "$GCC" = yes; then +- archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- fi +- runpath_var='LD_RUN_PATH' +- hardcode_shlibpath_var=no +- ;; ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*) ++ no_undefined_flag_GCJ='${wl}-z,text' ++ archive_cmds_need_lc_GCJ=no ++ hardcode_shlibpath_var_GCJ=no ++ runpath_var='LD_RUN_PATH' ++ ++ if test "$GCC" = yes; then ++ archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; + +- *) +- ld_shlibs=no +- ;; +- esac +-fi +-echo "$ac_t""$ld_shlibs" 1>&6 +-test "$ld_shlibs" = no && can_build_shared=no ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ no_undefined_flag_GCJ='${wl}-z,text' ++ allow_undefined_flag_GCJ='${wl}-z,nodefs' ++ archive_cmds_need_lc_GCJ=no ++ hardcode_shlibpath_var_GCJ=no ++ hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' ++ hardcode_libdir_separator_GCJ=':' ++ link_all_deplibs_GCJ=yes ++ export_dynamic_flag_spec_GCJ='${wl}-Bexport' ++ runpath_var='LD_RUN_PATH' ++ ++ if test "$GCC" = yes; then ++ archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; + +-# Check hardcoding attributes. +-echo $ac_n "checking how to hardcode library paths into programs""... $ac_c" 1>&6 +-echo "configure:3548: checking how to hardcode library paths into programs" >&5 +-hardcode_action= +-if test -n "$hardcode_libdir_flag_spec" || \ +- test -n "$runpath_var"; then ++ uts4*) ++ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec_GCJ='-L$libdir' ++ hardcode_shlibpath_var_GCJ=no ++ ;; + +- # We can hardcode non-existant directories. +- if test "$hardcode_direct" != no && +- # If the only mechanism to avoid hardcoding is shlibpath_var, we +- # have to relink, otherwise we might link with an installed library +- # when we should be linking with a yet-to-be-installed one +- ## test "$hardcode_shlibpath_var" != no && +- test "$hardcode_minus_L" != no; then +- # Linking always hardcodes the temporary library directory. +- hardcode_action=relink +- else +- # We can link without hardcoding, and we can hardcode nonexisting dirs. +- hardcode_action=immediate ++ *) ++ ld_shlibs_GCJ=no ++ ;; ++ esac + fi +-else +- # We cannot hardcode anything, or else we can only hardcode existing +- # directories. +- hardcode_action=unsupported +-fi +-echo "$ac_t""$hardcode_action" 1>&6 + +-striplib= +-old_striplib= +-echo $ac_n "checking whether stripping libraries is possible""... $ac_c" 1>&6 +-echo "configure:3576: checking whether stripping libraries is possible" >&5 +-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then +- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" +- test -z "$striplib" && striplib="$STRIP --strip-unneeded" +- echo "$ac_t""yes" 1>&6 +-else +- echo "$ac_t""no" 1>&6 +-fi ++echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5 ++echo "${ECHO_T}$ld_shlibs_GCJ" >&6 ++test "$ld_shlibs_GCJ" = no && can_build_shared=no + +-reload_cmds='$LD$reload_flag -o $output$reload_objs' +-test -z "$deplibs_check_method" && deplibs_check_method=unknown ++# ++# Do we need to explicitly link libc? ++# ++case "x$archive_cmds_need_lc_GCJ" in ++x|xyes) ++ # Assume -lc should be added ++ archive_cmds_need_lc_GCJ=yes ++ ++ if test "$enable_shared" = yes && test "$GCC" = yes; then ++ case $archive_cmds_GCJ in ++ *'~'*) ++ # FIXME: we may have to deal with multi-command sequences. ++ ;; ++ '$CC '*) ++ # Test whether the compiler implicitly links with -lc since on some ++ # systems, -lgcc has to come before -lc. If gcc already passes -lc ++ # to ld, don't add -lc before -lgcc. ++ echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 ++ $rm conftest* ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } 2>conftest.err; then ++ soname=conftest ++ lib=conftest ++ libobjs=conftest.$ac_objext ++ deplibs= ++ wl=$lt_prog_compiler_wl_GCJ ++ pic_flag=$lt_prog_compiler_pic_GCJ ++ compiler_flags=-v ++ linker_flags=-v ++ verstring= ++ output_objdir=. ++ libname=conftest ++ lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ ++ allow_undefined_flag_GCJ= ++ if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 ++ (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++ then ++ archive_cmds_need_lc_GCJ=no ++ else ++ archive_cmds_need_lc_GCJ=yes ++ fi ++ allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag ++ else ++ cat conftest.err 1>&5 ++ fi ++ $rm conftest* ++ echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5 ++echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6 ++ ;; ++ esac ++ fi ++ ;; ++esac + +-# PORTME Fill in your ld.so characteristics +-echo $ac_n "checking dynamic linker characteristics""... $ac_c" 1>&6 +-echo "configure:3590: checking dynamic linker characteristics" >&5 ++echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 ++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 + library_names_spec= + libname_spec='lib$name' + soname_spec= ++shrext_cmds=".so" + postinstall_cmds= + postuninstall_cmds= + finish_cmds= +@@ -3599,23 +16863,45 @@ + version_type=none + dynamic_linker="$host_os ld.so" + sys_lib_dlsearch_path_spec="/lib /usr/lib" +-sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" ++if test "$GCC" = yes; then ++ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then ++ # if the path contains ";" then we assume it to be the separator ++ # otherwise default to the standard path separator (i.e. ":") - it is ++ # assumed that no part of a normal pathname contains ";" but that should ++ # okay in the real world where ";" in dirpaths is itself problematic. ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++else ++ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" ++fi ++need_lib_prefix=unknown ++hardcode_into_libs=no ++ ++# when you set need_version to no, make sure it does not cause -set_version ++# flags to be left without arguments ++need_version=unknown + + case $host_os in + aix3*) + version_type=linux +- library_names_spec='${libname}${release}.so$versuffix $libname.a' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + +- # AIX has no versioning support, so we append a major version to the name. +- soname_spec='${libname}${release}.so$major' ++ # AIX 3 has no versioning support, so we append a major version to the name. ++ soname_spec='${libname}${release}${shared_ext}$major' + ;; + + aix4* | aix5*) + version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 +- library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' ++ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file +@@ -3624,13 +16910,13 @@ + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in +- aix4 | aix4.[01] | aix4.[01].*) ++ aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' +- echo ' yes ' +- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then +- : ++ echo ' yes ' ++ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then ++ : + else +- can_build_shared=no ++ can_build_shared=no + fi + ;; + esac +@@ -3638,42 +16924,41 @@ + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then +- # If using run time linking (on AIX 4.2 or later) use lib.so instead of +- # lib.a to let people know that these are not typical AIX shared libraries. +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' ++ # If using run time linking (on AIX 4.2 or later) use lib.so ++ # instead of lib.a to let people know that these are not ++ # typical AIX shared libraries. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' +- soname_spec='${libname}${release}.so$major' ++ soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH +- deplibs_check_method=pass_all + fi + ;; + + amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. +- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' ++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + + beos*) +- library_names_spec='${libname}.so' ++ library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +-bsdi4*) ++bsdi[45]*) + version_type=linux + need_version=no +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' +- soname_spec='${libname}${release}.so$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" +- export_dynamic_flag_spec=-rdynamic + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs +@@ -3681,29 +16966,56 @@ + + cygwin* | mingw* | pw32*) + version_type=windows ++ shrext_cmds=".dll" + need_version=no + need_lib_prefix=no ++ + case $GCC,$host_os in +- yes,cygwin*) ++ yes,cygwin* | yes,mingw* | yes,pw32*) + library_names_spec='$libname.dll.a' +- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' +- postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ ++ # DLL is installed to $(libdir)/../bin by postinstall_cmds ++ postinstall_cmds='base_file=`basename \${file}`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ +- $install_prog .libs/$dlname \$dldir/$dlname' +- postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ ++ $install_prog $dir/$dlname \$dldir/$dlname~ ++ chmod a+x \$dldir/$dlname' ++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' ++ shlibpath_overrides_runpath=yes ++ ++ case $host_os in ++ cygwin*) ++ # Cygwin DLLs use 'cyg' prefix rather than 'lib' ++ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ++ ;; ++ mingw*) ++ # MinGW DLLs use traditional 'lib' prefix ++ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then ++ # It is most probably a Windows format PATH printed by ++ # mingw gcc, but we are running on Cygwin. Gcc prints its search ++ # path with ; separators, and with drive letters. We can handle the ++ # drive letters (cygwin fileutils understands them), so leave them, ++ # especially as we might pass files found there to a mingw objdump, ++ # which wouldn't understand a cygwinified path. Ahh. ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ ;; ++ pw32*) ++ # pw32 DLLs use 'pw' prefix rather than 'lib' ++ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ ;; ++ esac + ;; +- yes,mingw*) +- library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' +- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"` +- ;; +- yes,pw32*) +- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll' +- ;; ++ + *) +- library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib' ++ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' +@@ -3716,30 +17028,53 @@ + version_type=darwin + need_lib_prefix=no + need_version=no +- # FIXME: Relying on posixy $() will cause problems for +- # cross-compilation, but unfortunately the echo tests do not +- # yet detect zsh echo's removal of \ escapes. +- library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' +- soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' ++ library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' ++ soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH ++ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' ++ # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. ++ if test "$GCC" = yes; then ++ sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` ++ else ++ sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' ++ fi ++ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ++ ;; ++ ++dgux*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH + ;; + + freebsd1*) + dynamic_linker=no + ;; + +-freebsd*) +- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` ++freebsd* | dragonfly*) ++ # DragonFly does not have aout. When/if they implement a new ++ # versioning mechanism, adjust this. ++ if test -x /usr/bin/objformat; then ++ objformat=`/usr/bin/objformat` ++ else ++ case $host_os in ++ freebsd[123]*) objformat=aout ;; ++ *) objformat=elf ;; ++ esac ++ fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) +- library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac +@@ -3748,852 +17083,965 @@ + freebsd2*) + shlibpath_overrides_runpath=yes + ;; +- *) ++ freebsd3.[01]* | freebsdelf3.[01]*) ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ ++ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; ++ freebsd*) # from 4.6 on ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ esac ++ ;; ++ ++gnu*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ ;; ++ ++hpux9* | hpux10* | hpux11*) ++ # Give a soname corresponding to the major version so that dld.sl refuses to ++ # link against other versions. ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ case $host_cpu in ++ ia64*) ++ shrext_cmds='.so' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.so" ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ if test "X$HPUX_IA64_MODE" = X32; then ++ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" ++ else ++ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" ++ fi ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ hppa*64*) ++ shrext_cmds='.sl' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ *) ++ shrext_cmds='.sl' ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=SHLIB_PATH ++ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; ++ esac ++ # HP-UX runs *really* slowly unless shared libraries are mode 555. ++ postinstall_cmds='chmod 555 $lib' ++ ;; ++ ++interix3*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ ++irix5* | irix6* | nonstopux*) ++ case $host_os in ++ nonstopux*) version_type=nonstopux ;; ++ *) ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ version_type=linux ++ else ++ version_type=irix ++ fi ;; ++ esac ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' ++ case $host_os in ++ irix5* | nonstopux*) ++ libsuff= shlibsuff= ++ ;; ++ *) ++ case $LD in # libtool.m4 will add one of these switches to LD ++ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") ++ libsuff= shlibsuff= libmagic=32-bit;; ++ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") ++ libsuff=32 shlibsuff=N32 libmagic=N32;; ++ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") ++ libsuff=64 shlibsuff=64 libmagic=64-bit;; ++ *) libsuff= shlibsuff= libmagic=never-match;; ++ esac ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" ++ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" ++ hardcode_into_libs=yes ++ ;; ++ ++# No shared lib support for Linux oldld, aout, or coff. ++linux*oldld* | linux*aout* | linux*coff*) ++ dynamic_linker=no ++ ;; ++ ++# This must be Linux ELF. ++linux* | k*bsd*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ # This implies no fast_install, which is unacceptable. ++ # Some rework will be needed to allow for fast_install ++ # before this can be enabled. ++ hardcode_into_libs=yes ++ ++ # Append ld.so.conf contents to the search path ++ if test -f /etc/ld.so.conf; then ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" ++ fi ++ ++ # We used to test for /lib/ld.so.1 and disable shared libraries on ++ # powerpc, because MkLinux only supported shared libraries with the ++ # GNU dynamic linker. Since this was broken with cross compilers, ++ # most powerpc-linux boxes support dynamic linking these days and ++ # people can always --disable-shared, the test was removed, and we ++ # assume the GNU/Linux dynamic linker is in use. ++ dynamic_linker='GNU/Linux ld.so' ++ ;; ++ ++netbsdelf*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='NetBSD ld.elf_so' ++ ;; ++ ++netbsd*) ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ dynamic_linker='NetBSD (a.out) ld.so' ++ else ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='NetBSD ld.elf_so' ++ fi ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ ++newsos6) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ ;; ++ ++nto-qnx*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ ;; ++ ++openbsd*) ++ version_type=sunos ++ sys_lib_dlsearch_path_spec="/usr/lib" ++ need_lib_prefix=no ++ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. ++ case $host_os in ++ openbsd3.3 | openbsd3.3.*) need_version=yes ;; ++ *) need_version=no ;; + esac ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ case $host_os in ++ openbsd2.[89] | openbsd2.[89].*) ++ shlibpath_overrides_runpath=no ++ ;; ++ *) ++ shlibpath_overrides_runpath=yes ++ ;; ++ esac ++ else ++ shlibpath_overrides_runpath=yes ++ fi ++ ;; ++ ++os2*) ++ libname_spec='$name' ++ shrext_cmds=".dll" ++ need_lib_prefix=no ++ library_names_spec='$libname${shared_ext} $libname.a' ++ dynamic_linker='OS/2 ld.exe' ++ shlibpath_var=LIBPATH ++ ;; ++ ++osf3* | osf4* | osf5*) ++ version_type=osf ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" ++ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +-gnu*) ++solaris*) + version_type=linux + need_lib_prefix=no + need_version=no +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' +- soname_spec='${libname}${release}.so$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes + hardcode_into_libs=yes ++ # ldd complains unless libraries are executable ++ postinstall_cmds='chmod +x $lib' + ;; + +-hpux9* | hpux10* | hpux11*) +- # Give a soname corresponding to the major version so that dld.sl refuses to +- # link against other versions. +- dynamic_linker="$host_os dld.sl" ++sunos4*) + version_type=sunos +- need_lib_prefix=no +- need_version=no +- shlibpath_var=SHLIB_PATH +- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH +- library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' +- soname_spec='${libname}${release}.sl$major' +- # HP-UX runs *really* slowly unless shared libraries are mode 555. +- postinstall_cmds='chmod 555 $lib' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ if test "$with_gnu_ld" = yes; then ++ need_lib_prefix=no ++ fi ++ need_version=yes + ;; + +-irix5* | irix6*) +- version_type=irix +- need_lib_prefix=no +- need_version=no +- soname_spec='${libname}${release}.so$major' +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' +- case $host_os in +- irix5*) +- libsuff= shlibsuff= +- ;; +- *) +- case $LD in # libtool.m4 will add one of these switches to LD +- *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; +- *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; +- *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; +- *) libsuff= shlibsuff= libmagic=never-match;; +- esac +- ;; ++sysv4 | sysv4.3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_vendor in ++ sni) ++ shlibpath_overrides_runpath=no ++ need_lib_prefix=no ++ export_dynamic_flag_spec='${wl}-Blargedynsym' ++ runpath_var=LD_RUN_PATH ++ ;; ++ siemens) ++ need_lib_prefix=no ++ ;; ++ motorola) ++ need_lib_prefix=no ++ need_version=no ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ++ ;; + esac +- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" +- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + ;; + +-# No shared lib support for Linux oldld, aout, or coff. +-linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) +- dynamic_linker=no ++sysv4*MP*) ++ if test -d /usr/nec ;then ++ version_type=linux ++ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' ++ soname_spec='$libname${shared_ext}.$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ fi + ;; + +-# This must be Linux ELF. +-linux-gnu*) +- version_type=linux ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ version_type=freebsd-elf + need_lib_prefix=no + need_version=no +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' +- soname_spec='${libname}${release}.so$major' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- # This implies no fast_install, which is unacceptable. +- # Some rework will be needed to allow for fast_install +- # before this can be enabled. + hardcode_into_libs=yes +- +- # We used to test for /lib/ld.so.1 and disable shared libraries on +- # powerpc, because MkLinux only supported shared libraries with the +- # GNU dynamic linker. Since this was broken with cross compilers, +- # most powerpc-linux boxes support dynamic linking these days and +- # people can always --disable-shared, the test was removed, and we +- # assume the GNU/Linux dynamic linker is in use. +- dynamic_linker='GNU/Linux ld.so' +- ;; +- +-netbsd*) +- version_type=sunos +- need_lib_prefix=no +- need_version=no +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- dynamic_linker='NetBSD (a.out) ld.so' ++ if test "$with_gnu_ld" = yes; then ++ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' ++ shlibpath_overrides_runpath=no + else +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' +- soname_spec='${libname}${release}.so$major' +- dynamic_linker='NetBSD ld.elf_so' ++ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' ++ shlibpath_overrides_runpath=yes ++ case $host_os in ++ sco3.2v5*) ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ++ ;; ++ esac + fi +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes ++ sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +-newsos6) ++uts4*) + version_type=linux +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes + ;; + +-openbsd*) +- version_type=sunos +- if test "$with_gnu_ld" = yes; then +- need_lib_prefix=no +- need_version=no +- fi +- library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- ;; ++*) ++ dynamic_linker=no ++ ;; ++esac ++echo "$as_me:$LINENO: result: $dynamic_linker" >&5 ++echo "${ECHO_T}$dynamic_linker" >&6 ++test "$dynamic_linker" = no && can_build_shared=no ++ ++variables_saved_for_relink="PATH $shlibpath_var $runpath_var" ++if test "$GCC" = yes; then ++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" ++fi ++ ++echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 ++hardcode_action_GCJ= ++if test -n "$hardcode_libdir_flag_spec_GCJ" || \ ++ test -n "$runpath_var_GCJ" || \ ++ test "X$hardcode_automatic_GCJ" = "Xyes" ; then ++ ++ # We can hardcode non-existant directories. ++ if test "$hardcode_direct_GCJ" != no && ++ # If the only mechanism to avoid hardcoding is shlibpath_var, we ++ # have to relink, otherwise we might link with an installed library ++ # when we should be linking with a yet-to-be-installed one ++ ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no && ++ test "$hardcode_minus_L_GCJ" != no; then ++ # Linking always hardcodes the temporary library directory. ++ hardcode_action_GCJ=relink ++ else ++ # We can link without hardcoding, and we can hardcode nonexisting dirs. ++ hardcode_action_GCJ=immediate ++ fi ++else ++ # We cannot hardcode anything, or else we can only hardcode existing ++ # directories. ++ hardcode_action_GCJ=unsupported ++fi ++echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5 ++echo "${ECHO_T}$hardcode_action_GCJ" >&6 ++ ++if test "$hardcode_action_GCJ" = relink; then ++ # Fast installation is not supported ++ enable_fast_install=no ++elif test "$shlibpath_overrides_runpath" = yes || ++ test "$enable_shared" = no; then ++ # Fast installation is not necessary ++ enable_fast_install=needless ++fi ++ ++ ++# The else clause should only fire when bootstrapping the ++# libtool distribution, otherwise you forgot to ship ltmain.sh ++# with your package, and you will get complaints that there are ++# no rules to generate ltmain.sh. ++if test -f "$ltmain"; then ++ # See if we are running on zsh, and set the options which allow our commands through ++ # without removal of \ escapes. ++ if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++ fi ++ # Now quote all the things that may contain metacharacters while being ++ # careful not to overquote the AC_SUBSTed values. We take copies of the ++ # variables and quote the copies for generation of the libtool script. ++ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ ++ SED SHELL STRIP \ ++ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ ++ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ ++ deplibs_check_method reload_flag reload_cmds need_locks \ ++ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ ++ lt_cv_sys_global_symbol_to_c_name_address \ ++ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ ++ old_postinstall_cmds old_postuninstall_cmds \ ++ compiler_GCJ \ ++ CC_GCJ \ ++ LD_GCJ \ ++ lt_prog_compiler_wl_GCJ \ ++ lt_prog_compiler_pic_GCJ \ ++ lt_prog_compiler_static_GCJ \ ++ lt_prog_compiler_no_builtin_flag_GCJ \ ++ export_dynamic_flag_spec_GCJ \ ++ thread_safe_flag_spec_GCJ \ ++ whole_archive_flag_spec_GCJ \ ++ enable_shared_with_static_runtimes_GCJ \ ++ old_archive_cmds_GCJ \ ++ old_archive_from_new_cmds_GCJ \ ++ predep_objects_GCJ \ ++ postdep_objects_GCJ \ ++ predeps_GCJ \ ++ postdeps_GCJ \ ++ compiler_lib_search_path_GCJ \ ++ archive_cmds_GCJ \ ++ archive_expsym_cmds_GCJ \ ++ postinstall_cmds_GCJ \ ++ postuninstall_cmds_GCJ \ ++ old_archive_from_expsyms_cmds_GCJ \ ++ allow_undefined_flag_GCJ \ ++ no_undefined_flag_GCJ \ ++ export_symbols_cmds_GCJ \ ++ hardcode_libdir_flag_spec_GCJ \ ++ hardcode_libdir_flag_spec_ld_GCJ \ ++ hardcode_libdir_separator_GCJ \ ++ hardcode_automatic_GCJ \ ++ module_cmds_GCJ \ ++ module_expsym_cmds_GCJ \ ++ lt_cv_prog_compiler_c_o_GCJ \ ++ exclude_expsyms_GCJ \ ++ include_expsyms_GCJ; do ++ ++ case $var in ++ old_archive_cmds_GCJ | \ ++ old_archive_from_new_cmds_GCJ | \ ++ archive_cmds_GCJ | \ ++ archive_expsym_cmds_GCJ | \ ++ module_cmds_GCJ | \ ++ module_expsym_cmds_GCJ | \ ++ old_archive_from_expsyms_cmds_GCJ | \ ++ export_symbols_cmds_GCJ | \ ++ extract_expsyms_cmds | reload_cmds | finish_cmds | \ ++ postinstall_cmds | postuninstall_cmds | \ ++ old_postinstall_cmds | old_postuninstall_cmds | \ ++ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) ++ # Double-quote double-evaled strings. ++ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ++ ;; ++ *) ++ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ++ ;; ++ esac ++ done ++ ++ case $lt_echo in ++ *'\$0 --fallback-echo"') ++ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` ++ ;; ++ esac ++ ++cfgfile="$ofile" ++ ++ cat <<__EOF__ >> "$cfgfile" ++# ### BEGIN LIBTOOL TAG CONFIG: $tagname ++ ++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: ++ ++# Shell to use when invoking shell scripts. ++SHELL=$lt_SHELL ++ ++# Whether or not to build shared libraries. ++build_libtool_libs=$enable_shared ++ ++# Whether or not to build static libraries. ++build_old_libs=$enable_static ++ ++# Whether or not to add -lc for building shared libraries. ++build_libtool_need_lc=$archive_cmds_need_lc_GCJ ++ ++# Whether or not to disallow shared libs when runtime libs are static ++allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ ++ ++# Whether or not to optimize for fast installation. ++fast_install=$enable_fast_install ++ ++# The host system. ++host_alias=$host_alias ++host=$host ++host_os=$host_os ++ ++# The build system. ++build_alias=$build_alias ++build=$build ++build_os=$build_os ++ ++# An echo program that does not interpret backslashes. ++echo=$lt_echo ++ ++# The archiver. ++AR=$lt_AR ++AR_FLAGS=$lt_AR_FLAGS ++ ++# A C compiler. ++LTCC=$lt_LTCC ++ ++# LTCC compiler flags. ++LTCFLAGS=$lt_LTCFLAGS ++ ++# A language-specific compiler. ++CC=$lt_compiler_GCJ ++ ++# Is the compiler the GNU C compiler? ++with_gcc=$GCC_GCJ ++ ++# An ERE matcher. ++EGREP=$lt_EGREP ++ ++# The linker used to build libraries. ++LD=$lt_LD_GCJ ++ ++# Whether we need hard or soft links. ++LN_S=$lt_LN_S ++ ++# A BSD-compatible nm program. ++NM=$lt_NM ++ ++# A symbol stripping program ++STRIP=$lt_STRIP ++ ++# Used to examine libraries when file_magic_cmd begins "file" ++MAGIC_CMD=$MAGIC_CMD ++ ++# Used on cygwin: DLL creation program. ++DLLTOOL="$DLLTOOL" ++ ++# Used on cygwin: object dumper. ++OBJDUMP="$OBJDUMP" ++ ++# Used on cygwin: assembler. ++AS="$AS" ++ ++# The name of the directory that contains temporary libtool files. ++objdir=$objdir ++ ++# How to create reloadable object files. ++reload_flag=$lt_reload_flag ++reload_cmds=$lt_reload_cmds ++ ++# How to pass a linker flag through the compiler. ++wl=$lt_lt_prog_compiler_wl_GCJ ++ ++# Object file suffix (normally "o"). ++objext="$ac_objext" ++ ++# Old archive suffix (normally "a"). ++libext="$libext" ++ ++# Shared library suffix (normally ".so"). ++shrext_cmds='$shrext_cmds' ++ ++# Executable file suffix (normally ""). ++exeext="$exeext" ++ ++# Additional compiler flags for building library objects. ++pic_flag=$lt_lt_prog_compiler_pic_GCJ ++pic_mode=$pic_mode ++ ++# What is the maximum length of a command? ++max_cmd_len=$lt_cv_sys_max_cmd_len ++ ++# Does compiler simultaneously support -c and -o options? ++compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ ++ ++# Must we lock files when doing compilation? ++need_locks=$lt_need_locks ++ ++# Do we need the lib prefix for modules? ++need_lib_prefix=$need_lib_prefix ++ ++# Do we need a version for libraries? ++need_version=$need_version ++ ++# Whether dlopen is supported. ++dlopen_support=$enable_dlopen ++ ++# Whether dlopen of programs is supported. ++dlopen_self=$enable_dlopen_self ++ ++# Whether dlopen of statically linked programs is supported. ++dlopen_self_static=$enable_dlopen_self_static + +-os2*) +- libname_spec='$name' +- need_lib_prefix=no +- library_names_spec='$libname.dll $libname.a' +- dynamic_linker='OS/2 ld.exe' +- shlibpath_var=LIBPATH +- ;; ++# Compiler flag to prevent dynamic linking. ++link_static_flag=$lt_lt_prog_compiler_static_GCJ + +-osf3* | osf4* | osf5*) +- version_type=osf +- need_version=no +- soname_spec='${libname}${release}.so' +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' +- shlibpath_var=LD_LIBRARY_PATH +- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" +- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" +- ;; ++# Compiler flag to turn off builtin functions. ++no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ + +-sco3.2v5*) +- version_type=osf +- soname_spec='${libname}${release}.so$major' +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' +- shlibpath_var=LD_LIBRARY_PATH +- ;; ++# Compiler flag to allow reflexive dlopens. ++export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ + +-solaris*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' +- soname_spec='${libname}${release}.so$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- # ldd complains unless libraries are executable +- postinstall_cmds='chmod +x $lib' +- ;; ++# Compiler flag to generate shared objects directly from archives. ++whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ + +-sunos4*) +- version_type=sunos +- library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' +- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- if test "$with_gnu_ld" = yes; then +- need_lib_prefix=no +- fi +- need_version=yes +- ;; ++# Compiler flag to generate thread-safe objects. ++thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ + +-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) +- version_type=linux +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' +- soname_spec='${libname}${release}.so$major' +- shlibpath_var=LD_LIBRARY_PATH +- case $host_vendor in +- sni) +- shlibpath_overrides_runpath=no +- ;; +- motorola) +- need_lib_prefix=no +- need_version=no +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' +- ;; +- esac +- ;; ++# Library versioning type. ++version_type=$version_type + +-uts4*) +- version_type=linux +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' +- soname_spec='${libname}${release}.so$major' +- shlibpath_var=LD_LIBRARY_PATH +- ;; ++# Format of library name prefix. ++libname_spec=$lt_libname_spec + +-dgux*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' +- soname_spec='${libname}${release}.so$major' +- shlibpath_var=LD_LIBRARY_PATH +- ;; ++# List of archive names. First name is the real one, the rest are links. ++# The last name is the one that the linker finds with -lNAME. ++library_names_spec=$lt_library_names_spec + +-sysv4*MP*) +- if test -d /usr/nec ;then +- version_type=linux +- library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' +- soname_spec='$libname.so.$major' +- shlibpath_var=LD_LIBRARY_PATH +- fi +- ;; ++# The coded name of the library, if different from the real name. ++soname_spec=$lt_soname_spec + +-*) +- dynamic_linker=no +- ;; +-esac +-echo "$ac_t""$dynamic_linker" 1>&6 +-test "$dynamic_linker" = no && can_build_shared=no ++# Commands used to build and install an old-style archive. ++RANLIB=$lt_RANLIB ++old_archive_cmds=$lt_old_archive_cmds_GCJ ++old_postinstall_cmds=$lt_old_postinstall_cmds ++old_postuninstall_cmds=$lt_old_postuninstall_cmds + +-# Report the final consequences. +-echo $ac_n "checking if libtool supports shared libraries""... $ac_c" 1>&6 +-echo "configure:3976: checking if libtool supports shared libraries" >&5 +-echo "$ac_t""$can_build_shared" 1>&6 ++# Create an old-style archive from a shared archive. ++old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ + +-if test "$hardcode_action" = relink; then +- # Fast installation is not supported +- enable_fast_install=no +-elif test "$shlibpath_overrides_runpath" = yes || +- test "$enable_shared" = no; then +- # Fast installation is not necessary +- enable_fast_install=needless +-fi ++# Create a temporary old-style archive to link instead of a shared archive. ++old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ + +-variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +-if test "$GCC" = yes; then +- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +-fi ++# Commands used to build and install a shared archive. ++archive_cmds=$lt_archive_cmds_GCJ ++archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ ++postinstall_cmds=$lt_postinstall_cmds ++postuninstall_cmds=$lt_postuninstall_cmds + +-if test "x$enable_dlopen" != xyes; then +- enable_dlopen=unknown +- enable_dlopen_self=unknown +- enable_dlopen_self_static=unknown +-else +- lt_cv_dlopen=no +- lt_cv_dlopen_libs= ++# Commands used to build a loadable module (assumed same as above if empty) ++module_cmds=$lt_module_cmds_GCJ ++module_expsym_cmds=$lt_module_expsym_cmds_GCJ + +- case $host_os in +- beos*) +- lt_cv_dlopen="load_add_on" +- lt_cv_dlopen_libs= +- lt_cv_dlopen_self=yes +- ;; ++# Commands to strip libraries. ++old_striplib=$lt_old_striplib ++striplib=$lt_striplib + +- cygwin* | mingw* | pw32*) +- lt_cv_dlopen="LoadLibrary" +- lt_cv_dlopen_libs= +- ;; ++# Dependencies to place before the objects being linked to create a ++# shared library. ++predep_objects=$lt_predep_objects_GCJ ++ ++# Dependencies to place after the objects being linked to create a ++# shared library. ++postdep_objects=$lt_postdep_objects_GCJ ++ ++# Dependencies to place before the objects being linked to create a ++# shared library. ++predeps=$lt_predeps_GCJ ++ ++# Dependencies to place after the objects being linked to create a ++# shared library. ++postdeps=$lt_postdeps_GCJ ++ ++# The library search path used internally by the compiler when linking ++# a shared library. ++compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ + +- *) +- echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6 +-echo "configure:4015: checking for dlopen in -ldl" >&5 +-ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'` +-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- ac_save_LIBS="$LIBS" +-LIBS="-ldl $LIBS" +-cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +- rm -rf conftest* +- eval "ac_cv_lib_$ac_lib_var=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_lib_$ac_lib_var=no" +-fi +-rm -f conftest* +-LIBS="$ac_save_LIBS" ++# Command to use when deplibs_check_method == file_magic. ++file_magic_cmd=$lt_file_magic_cmd + +-fi +-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +-else +- echo "$ac_t""no" 1>&6 +-echo $ac_n "checking for dlopen""... $ac_c" 1>&6 +-echo "configure:4053: checking for dlopen" >&5 +-if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext < +-/* Override any gcc2 internal prototype to avoid an error. */ +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dlopen(); ++# Flag that allows shared libraries with undefined symbols to be built. ++allow_undefined_flag=$lt_allow_undefined_flag_GCJ + +-int main() { ++# Flag that forces no undefined symbols. ++no_undefined_flag=$lt_no_undefined_flag_GCJ + +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub_dlopen) || defined (__stub___dlopen) +-choke me +-#else +-dlopen(); +-#endif ++# Commands used to finish a libtool library installation in a directory. ++finish_cmds=$lt_finish_cmds + +-; return 0; } +-EOF +-if { (eval echo configure:4081: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +- rm -rf conftest* +- eval "ac_cv_func_dlopen=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_func_dlopen=no" +-fi +-rm -f conftest* +-fi ++# Same as above, but a single script fragment to be evaled but not shown. ++finish_eval=$lt_finish_eval + +-if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- lt_cv_dlopen="dlopen" +-else +- echo "$ac_t""no" 1>&6 +-echo $ac_n "checking for shl_load""... $ac_c" 1>&6 +-echo "configure:4099: checking for shl_load" >&5 +-if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext < +-/* Override any gcc2 internal prototype to avoid an error. */ +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char shl_load(); ++# Take the output of nm and produce a listing of raw symbols and C names. ++global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +-int main() { ++# Transform the output of nm in a proper C declaration ++global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub_shl_load) || defined (__stub___shl_load) +-choke me +-#else +-shl_load(); +-#endif ++# Transform the output of nm in a C name address pair ++global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +-; return 0; } +-EOF +-if { (eval echo configure:4127: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +- rm -rf conftest* +- eval "ac_cv_func_shl_load=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_func_shl_load=no" +-fi +-rm -f conftest* +-fi ++# This is the shared library runtime path variable. ++runpath_var=$runpath_var + +-if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- lt_cv_dlopen="shl_load" +-else +- echo "$ac_t""no" 1>&6 +-echo $ac_n "checking for dlopen in -lsvld""... $ac_c" 1>&6 +-echo "configure:4145: checking for dlopen in -lsvld" >&5 +-ac_lib_var=`echo svld'_'dlopen | sed 'y%./+-%__p_%'` +-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- ac_save_LIBS="$LIBS" +-LIBS="-lsvld $LIBS" +-cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +- rm -rf conftest* +- eval "ac_cv_lib_$ac_lib_var=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_lib_$ac_lib_var=no" +-fi +-rm -f conftest* +-LIBS="$ac_save_LIBS" ++# Is shlibpath searched before the hard-coded library search path? ++shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +-fi +-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" +-else +- echo "$ac_t""no" 1>&6 +-echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6 +-echo "configure:4183: checking for shl_load in -ldld" >&5 +-ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'` +-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- ac_save_LIBS="$LIBS" +-LIBS="-ldld $LIBS" +-cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +- rm -rf conftest* +- eval "ac_cv_lib_$ac_lib_var=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_lib_$ac_lib_var=no" +-fi +-rm -f conftest* +-LIBS="$ac_save_LIBS" ++# Whether we should hardcode library paths into libraries. ++hardcode_into_libs=$hardcode_into_libs + +-fi +-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" +-else +- echo "$ac_t""no" 1>&6 +-fi ++# Flag to hardcode \$libdir into a binary during linking. ++# This must work even if \$libdir does not exist. ++hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ + +- +-fi ++# If ld is used when linking, flag to hardcode \$libdir into ++# a binary during linking. This must work even if \$libdir does ++# not exist. ++hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ ++ ++# Whether we need a single -rpath flag with a separated argument. ++hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ ++ ++# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the ++# resulting binary. ++hardcode_direct=$hardcode_direct_GCJ + +- +-fi ++# Set to yes if using the -LDIR flag during linking hardcodes DIR into the ++# resulting binary. ++hardcode_minus_L=$hardcode_minus_L_GCJ + +- +-fi ++# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into ++# the resulting binary. ++hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ + +- +-fi ++# Set to yes if building a shared library automatically hardcodes DIR into the library ++# and all subsequent libraries and executables linked against it. ++hardcode_automatic=$hardcode_automatic_GCJ + +- ;; +- esac ++# Variables whose values should be saved in libtool wrapper scripts and ++# restored at relink time. ++variables_saved_for_relink="$variables_saved_for_relink" + +- if test "x$lt_cv_dlopen" != xno; then +- enable_dlopen=yes +- else +- enable_dlopen=no +- fi ++# Whether libtool must link a program against all its dependency libraries. ++link_all_deplibs=$link_all_deplibs_GCJ + +- case $lt_cv_dlopen in +- dlopen) +- save_CPPFLAGS="$CPPFLAGS" +- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" ++# Compile-time system search path for libraries ++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +- save_LDFLAGS="$LDFLAGS" +- eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" ++# Run-time system search path for libraries ++sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +- save_LIBS="$LIBS" +- LIBS="$lt_cv_dlopen_libs $LIBS" ++# Fix the shell variable \$srcfile for the compiler. ++fix_srcfile_path="$fix_srcfile_path_GCJ" + +- echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6 +-echo "configure:4255: checking whether a program can dlopen itself" >&5 +-if eval "test \"`echo '$''{'lt_cv_dlopen_self'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- if test "$cross_compiling" = yes; then : +- lt_cv_dlopen_self=cross +-else +- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 +- lt_status=$lt_dlunknown +- cat > conftest.$ac_ext < +-#endif ++# The commands to list exported symbols. ++export_symbols_cmds=$lt_export_symbols_cmds_GCJ + +-#include ++# The commands to extract the exported symbol list from a shared archive. ++extract_expsyms_cmds=$lt_extract_expsyms_cmds + +-#ifdef RTLD_GLOBAL +-# define LT_DLGLOBAL RTLD_GLOBAL +-#else +-# ifdef DL_GLOBAL +-# define LT_DLGLOBAL DL_GLOBAL +-# else +-# define LT_DLGLOBAL 0 +-# endif +-#endif ++# Symbols that should not be listed in the preloaded symbols. ++exclude_expsyms=$lt_exclude_expsyms_GCJ + +-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we +- find out it does not work in some platform. */ +-#ifndef LT_DLLAZY_OR_NOW +-# ifdef RTLD_LAZY +-# define LT_DLLAZY_OR_NOW RTLD_LAZY +-# else +-# ifdef DL_LAZY +-# define LT_DLLAZY_OR_NOW DL_LAZY +-# else +-# ifdef RTLD_NOW +-# define LT_DLLAZY_OR_NOW RTLD_NOW +-# else +-# ifdef DL_NOW +-# define LT_DLLAZY_OR_NOW DL_NOW +-# else +-# define LT_DLLAZY_OR_NOW 0 +-# endif +-# endif +-# endif +-# endif +-#endif ++# Symbols that must always be exported. ++include_expsyms=$lt_include_expsyms_GCJ + +-#ifdef __cplusplus +-extern "C" void exit (int); +-#endif ++# ### END LIBTOOL TAG CONFIG: $tagname + +-void fnord() { int i=42;} +-int main () +-{ +- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +- int status = $lt_dlunknown; ++__EOF__ + +- if (self) +- { +- if (dlsym (self,"fnord")) status = $lt_dlno_uscore; +- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; +- /* dlclose (self); */ +- } + +- exit (status); +-} +-EOF +- if { (eval echo configure:4326: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then +- (./conftest; exit; ) 2>/dev/null +- lt_status=$? +- case x$lt_status in +- x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; +- x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; +- x$lt_unknown|x*) lt_cv_dlopen_self=no ;; +- esac +- else : +- # compilation failed +- lt_cv_dlopen_self=no ++else ++ # If there is no Makefile yet, we rely on a make rule to execute ++ # `config.status --recheck' to rerun these tests and create the ++ # libtool script then. ++ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` ++ if test -f "$ltmain_in"; then ++ test -f Makefile && make "$ltmain" + fi + fi +-rm -fr conftest* +- +- +-fi + +-echo "$ac_t""$lt_cv_dlopen_self" 1>&6 + +- if test "x$lt_cv_dlopen_self" = xyes; then +- LDFLAGS="$LDFLAGS $link_static_flag" +- echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6 +-echo "configure:4349: checking whether a statically linked program can dlopen itself" >&5 +-if eval "test \"`echo '$''{'lt_cv_dlopen_self_static'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- if test "$cross_compiling" = yes; then : +- lt_cv_dlopen_self_static=cross +-else +- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 +- lt_status=$lt_dlunknown +- cat > conftest.$ac_ext < +-#endif ++CC="$lt_save_CC" + +-#include ++ else ++ tagname="" ++ fi ++ ;; + +-#ifdef RTLD_GLOBAL +-# define LT_DLGLOBAL RTLD_GLOBAL +-#else +-# ifdef DL_GLOBAL +-# define LT_DLGLOBAL DL_GLOBAL +-# else +-# define LT_DLGLOBAL 0 +-# endif +-#endif ++ RC) + +-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we +- find out it does not work in some platform. */ +-#ifndef LT_DLLAZY_OR_NOW +-# ifdef RTLD_LAZY +-# define LT_DLLAZY_OR_NOW RTLD_LAZY +-# else +-# ifdef DL_LAZY +-# define LT_DLLAZY_OR_NOW DL_LAZY +-# else +-# ifdef RTLD_NOW +-# define LT_DLLAZY_OR_NOW RTLD_NOW +-# else +-# ifdef DL_NOW +-# define LT_DLLAZY_OR_NOW DL_NOW +-# else +-# define LT_DLLAZY_OR_NOW 0 +-# endif +-# endif +-# endif +-# endif +-#endif + +-#ifdef __cplusplus +-extern "C" void exit (int); +-#endif + +-void fnord() { int i=42;} +-int main () +-{ +- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +- int status = $lt_dlunknown; ++# Source file extension for RC test sources. ++ac_ext=rc + +- if (self) +- { +- if (dlsym (self,"fnord")) status = $lt_dlno_uscore; +- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; +- /* dlclose (self); */ +- } ++# Object file extension for compiled RC test sources. ++objext=o ++objext_RC=$objext + +- exit (status); +-} +-EOF +- if { (eval echo configure:4420: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then +- (./conftest; exit; ) 2>/dev/null +- lt_status=$? +- case x$lt_status in +- x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; +- x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; +- x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; +- esac +- else : +- # compilation failed +- lt_cv_dlopen_self_static=no +- fi +-fi +-rm -fr conftest* ++# Code to be used in simple compile tests ++lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n' + +- +-fi ++# Code to be used in simple link tests ++lt_simple_link_test_code="$lt_simple_compile_test_code" + +-echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6 +- fi ++# ltmain only uses $CC for tagged configurations so make sure $CC is set. + +- CPPFLAGS="$save_CPPFLAGS" +- LDFLAGS="$save_LDFLAGS" +- LIBS="$save_LIBS" +- ;; +- esac ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} + +- case $lt_cv_dlopen_self in +- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; +- *) enable_dlopen_self=unknown ;; +- esac ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +- case $lt_cv_dlopen_self_static in +- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; +- *) enable_dlopen_self_static=unknown ;; +- esac +-fi ++# Allow CC to be a program name with arguments. ++compiler=$CC + + +-if test "$enable_shared" = yes && test "$GCC" = yes; then +- case $archive_cmds in +- *'~'*) +- # FIXME: we may have to deal with multi-command sequences. +- ;; +- '$CC '*) +- # Test whether the compiler implicitly links with -lc since on some +- # systems, -lgcc has to come before -lc. If gcc already passes -lc +- # to ld, don't add -lc before -lgcc. +- echo $ac_n "checking whether -lc should be explicitly linked in""... $ac_c" 1>&6 +-echo "configure:4469: checking whether -lc should be explicitly linked in" >&5 +- if eval "test \"`echo '$''{'lt_cv_archive_cmds_need_lc'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- $rm conftest* +- echo 'static int dummy;' > conftest.$ac_ext ++# save warnings/boilerplate of simple test code ++ac_outfile=conftest.$ac_objext ++printf "$lt_simple_compile_test_code" >conftest.$ac_ext ++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_compiler_boilerplate=`cat conftest.err` ++$rm conftest* ++ ++ac_outfile=conftest.$ac_objext ++printf "$lt_simple_link_test_code" >conftest.$ac_ext ++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_linker_boilerplate=`cat conftest.err` ++$rm conftest* + +- if { (eval echo configure:4476: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +- soname=conftest +- lib=conftest +- libobjs=conftest.$ac_objext +- deplibs= +- wl=$lt_cv_prog_cc_wl +- compiler_flags=-v +- linker_flags=-v +- verstring= +- output_objdir=. +- libname=conftest +- save_allow_undefined_flag=$allow_undefined_flag +- allow_undefined_flag= +- if { (eval echo configure:4489: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\") 1>&5; (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5; } +- then +- lt_cv_archive_cmds_need_lc=no +- else +- lt_cv_archive_cmds_need_lc=yes +- fi +- allow_undefined_flag=$save_allow_undefined_flag +- else +- cat conftest.err 1>&5 +- fi +-fi + +- echo "$ac_t""$lt_cv_archive_cmds_need_lc" 1>&6 +- ;; ++# Allow CC to be a program name with arguments. ++lt_save_CC="$CC" ++CC=${RC-"windres"} ++compiler=$CC ++compiler_RC=$CC ++for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; + esac +-fi +-need_lc=${lt_cv_archive_cmds_need_lc-yes} ++done ++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + +-# The second clause should only fire when bootstrapping the ++lt_cv_prog_compiler_c_o_RC=yes ++ ++# The else clause should only fire when bootstrapping the + # libtool distribution, otherwise you forgot to ship ltmain.sh + # with your package, and you will get complaints that there are + # no rules to generate ltmain.sh. + if test -f "$ltmain"; then +- : +-else +- # If there is no Makefile yet, we rely on a make rule to execute +- # `config.status --recheck' to rerun these tests and create the +- # libtool script then. +- test -f Makefile && make "$ltmain" +-fi +- +-if test -f "$ltmain"; then +- trap "$rm \"${ofile}T\"; exit 1" 1 2 15 +- $rm -f "${ofile}T" +- +- echo creating $ofile +- ++ # See if we are running on zsh, and set the options which allow our commands through ++ # without removal of \ escapes. ++ if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++ fi + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. +- for var in echo old_CC old_CFLAGS \ +- AR AR_FLAGS CC LD LN_S NM SHELL \ +- reload_flag reload_cmds wl \ +- pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ +- thread_safe_flag_spec whole_archive_flag_spec libname_spec \ +- library_names_spec soname_spec \ +- RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ +- old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \ +- postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \ +- old_striplib striplib file_magic_cmd export_symbols_cmds \ +- deplibs_check_method allow_undefined_flag no_undefined_flag \ +- finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ +- hardcode_libdir_flag_spec hardcode_libdir_separator \ ++ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ ++ SED SHELL STRIP \ ++ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ ++ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ ++ deplibs_check_method reload_flag reload_cmds need_locks \ ++ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ ++ lt_cv_sys_global_symbol_to_c_name_address \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ +- compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do ++ old_postinstall_cmds old_postuninstall_cmds \ ++ compiler_RC \ ++ CC_RC \ ++ LD_RC \ ++ lt_prog_compiler_wl_RC \ ++ lt_prog_compiler_pic_RC \ ++ lt_prog_compiler_static_RC \ ++ lt_prog_compiler_no_builtin_flag_RC \ ++ export_dynamic_flag_spec_RC \ ++ thread_safe_flag_spec_RC \ ++ whole_archive_flag_spec_RC \ ++ enable_shared_with_static_runtimes_RC \ ++ old_archive_cmds_RC \ ++ old_archive_from_new_cmds_RC \ ++ predep_objects_RC \ ++ postdep_objects_RC \ ++ predeps_RC \ ++ postdeps_RC \ ++ compiler_lib_search_path_RC \ ++ archive_cmds_RC \ ++ archive_expsym_cmds_RC \ ++ postinstall_cmds_RC \ ++ postuninstall_cmds_RC \ ++ old_archive_from_expsyms_cmds_RC \ ++ allow_undefined_flag_RC \ ++ no_undefined_flag_RC \ ++ export_symbols_cmds_RC \ ++ hardcode_libdir_flag_spec_RC \ ++ hardcode_libdir_flag_spec_ld_RC \ ++ hardcode_libdir_separator_RC \ ++ hardcode_automatic_RC \ ++ module_cmds_RC \ ++ module_expsym_cmds_RC \ ++ lt_cv_prog_compiler_c_o_RC \ ++ exclude_expsyms_RC \ ++ include_expsyms_RC; do + + case $var in +- reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ +- old_postinstall_cmds | old_postuninstall_cmds | \ +- export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ +- extract_expsyms_cmds | old_archive_from_expsyms_cmds | \ ++ old_archive_cmds_RC | \ ++ old_archive_from_new_cmds_RC | \ ++ archive_cmds_RC | \ ++ archive_expsym_cmds_RC | \ ++ module_cmds_RC | \ ++ module_expsym_cmds_RC | \ ++ old_archive_from_expsyms_cmds_RC | \ ++ export_symbols_cmds_RC | \ ++ extract_expsyms_cmds | reload_cmds | finish_cmds | \ + postinstall_cmds | postuninstall_cmds | \ +- finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) ++ old_postinstall_cmds | old_postuninstall_cmds | \ ++ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; +- *) +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" +- ;; +- esac +- done +- +- cat <<__EOF__ > "${ofile}T" +-#! $SHELL +- +-# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +-# NOTE: Changes made to this file will be lost: look at ltmain.sh. +-# +-# Copyright (C) 1996-2000 Free Software Foundation, Inc. +-# Originally by Gordon Matzigkeit , 1996 +-# +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2 of the License, or +-# (at your option) any later version. +-# +-# This program is distributed in the hope that it will be useful, but +-# WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +-# General Public License for more details. +-# +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +-# +-# As a special exception to the GNU General Public License, if you +-# distribute this file as part of a program that contains a +-# configuration script generated by Autoconf, you may include it under +-# the same distribution terms that you use for the rest of that program. ++ *) ++ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ++ ;; ++ esac ++ done + +-# Sed that helps us avoid accidentally triggering echo(1) options like -n. +-Xsed="sed -e s/^X//" ++ case $lt_echo in ++ *'\$0 --fallback-echo"') ++ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` ++ ;; ++ esac + +-# The HP-UX ksh and POSIX shell print the target directory to stdout +-# if CDPATH is set. +-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi ++cfgfile="$ofile" + +-# ### BEGIN LIBTOOL CONFIG ++ cat <<__EOF__ >> "$cfgfile" ++# ### BEGIN LIBTOOL TAG CONFIG: $tagname + + # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +@@ -4603,18 +18051,27 @@ + # Whether or not to build shared libraries. + build_libtool_libs=$enable_shared + +-# Whether or not to add -lc for building shared libraries. +-build_libtool_need_lc=$need_lc +- + # Whether or not to build static libraries. + build_old_libs=$enable_static + ++# Whether or not to add -lc for building shared libraries. ++build_libtool_need_lc=$archive_cmds_need_lc_RC ++ ++# Whether or not to disallow shared libs when runtime libs are static ++allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC ++ + # Whether or not to optimize for fast installation. + fast_install=$enable_fast_install + + # The host system. + host_alias=$host_alias + host=$host ++host_os=$host_os ++ ++# The build system. ++build_alias=$build_alias ++build=$build ++build_os=$build_os + + # An echo program that does not interpret backslashes. + echo=$lt_echo +@@ -4623,14 +18080,23 @@ + AR=$lt_AR + AR_FLAGS=$lt_AR_FLAGS + +-# The default C compiler. +-CC=$lt_CC ++# A C compiler. ++LTCC=$lt_LTCC ++ ++# LTCC compiler flags. ++LTCFLAGS=$lt_LTCFLAGS ++ ++# A language-specific compiler. ++CC=$lt_compiler_RC + + # Is the compiler the GNU C compiler? +-with_gcc=$GCC ++with_gcc=$GCC_RC ++ ++# An ERE matcher. ++EGREP=$lt_EGREP + + # The linker used to build libraries. +-LD=$lt_LD ++LD=$lt_LD_RC + + # Whether we need hard or soft links. + LN_S=$lt_LN_S +@@ -4639,7 +18105,7 @@ + NM=$lt_NM + + # A symbol stripping program +-STRIP=$STRIP ++STRIP=$lt_STRIP + + # Used to examine libraries when file_magic_cmd begins "file" + MAGIC_CMD=$MAGIC_CMD +@@ -4661,7 +18127,7 @@ + reload_cmds=$lt_reload_cmds + + # How to pass a linker flag through the compiler. +-wl=$lt_wl ++wl=$lt_lt_prog_compiler_wl_RC + + # Object file suffix (normally "o"). + objext="$ac_objext" +@@ -4669,20 +18135,23 @@ + # Old archive suffix (normally "a"). + libext="$libext" + ++# Shared library suffix (normally ".so"). ++shrext_cmds='$shrext_cmds' ++ + # Executable file suffix (normally ""). + exeext="$exeext" + + # Additional compiler flags for building library objects. +-pic_flag=$lt_pic_flag ++pic_flag=$lt_lt_prog_compiler_pic_RC + pic_mode=$pic_mode + +-# Does compiler simultaneously support -c and -o options? +-compiler_c_o=$lt_compiler_c_o ++# What is the maximum length of a command? ++max_cmd_len=$lt_cv_sys_max_cmd_len + +-# Can we write directly to a .lo ? +-compiler_o_lo=$lt_compiler_o_lo ++# Does compiler simultaneously support -c and -o options? ++compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC + +-# Must we lock files when doing compilation ? ++# Must we lock files when doing compilation? + need_locks=$lt_need_locks + + # Do we need the lib prefix for modules? +@@ -4701,19 +18170,19 @@ + dlopen_self_static=$enable_dlopen_self_static + + # Compiler flag to prevent dynamic linking. +-link_static_flag=$lt_link_static_flag ++link_static_flag=$lt_lt_prog_compiler_static_RC + + # Compiler flag to turn off builtin functions. +-no_builtin_flag=$lt_no_builtin_flag ++no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC + + # Compiler flag to allow reflexive dlopens. +-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec ++export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC + + # Compiler flag to generate shared objects directly from archives. +-whole_archive_flag_spec=$lt_whole_archive_flag_spec ++whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC + + # Compiler flag to generate thread-safe objects. +-thread_safe_flag_spec=$lt_thread_safe_flag_spec ++thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC + + # Library versioning type. + version_type=$version_type +@@ -4730,26 +18199,50 @@ + + # Commands used to build and install an old-style archive. + RANLIB=$lt_RANLIB +-old_archive_cmds=$lt_old_archive_cmds ++old_archive_cmds=$lt_old_archive_cmds_RC + old_postinstall_cmds=$lt_old_postinstall_cmds + old_postuninstall_cmds=$lt_old_postuninstall_cmds + + # Create an old-style archive from a shared archive. +-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds ++old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC + + # Create a temporary old-style archive to link instead of a shared archive. +-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds ++old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC + + # Commands used to build and install a shared archive. +-archive_cmds=$lt_archive_cmds +-archive_expsym_cmds=$lt_archive_expsym_cmds ++archive_cmds=$lt_archive_cmds_RC ++archive_expsym_cmds=$lt_archive_expsym_cmds_RC + postinstall_cmds=$lt_postinstall_cmds + postuninstall_cmds=$lt_postuninstall_cmds + ++# Commands used to build a loadable module (assumed same as above if empty) ++module_cmds=$lt_module_cmds_RC ++module_expsym_cmds=$lt_module_expsym_cmds_RC ++ + # Commands to strip libraries. + old_striplib=$lt_old_striplib + striplib=$lt_striplib + ++# Dependencies to place before the objects being linked to create a ++# shared library. ++predep_objects=$lt_predep_objects_RC ++ ++# Dependencies to place after the objects being linked to create a ++# shared library. ++postdep_objects=$lt_postdep_objects_RC ++ ++# Dependencies to place before the objects being linked to create a ++# shared library. ++predeps=$lt_predeps_RC ++ ++# Dependencies to place after the objects being linked to create a ++# shared library. ++postdeps=$lt_postdeps_RC ++ ++# The library search path used internally by the compiler when linking ++# a shared library. ++compiler_lib_search_path=$lt_compiler_lib_search_path_RC ++ + # Method to check whether dependent libraries are shared objects. + deplibs_check_method=$lt_deplibs_check_method + +@@ -4757,10 +18250,10 @@ + file_magic_cmd=$lt_file_magic_cmd + + # Flag that allows shared libraries with undefined symbols to be built. +-allow_undefined_flag=$lt_allow_undefined_flag ++allow_undefined_flag=$lt_allow_undefined_flag_RC + + # Flag that forces no undefined symbols. +-no_undefined_flag=$lt_no_undefined_flag ++no_undefined_flag=$lt_no_undefined_flag_RC + + # Commands used to finish a libtool library installation in a directory. + finish_cmds=$lt_finish_cmds +@@ -4769,10 +18262,13 @@ + finish_eval=$lt_finish_eval + + # Take the output of nm and produce a listing of raw symbols and C names. +-global_symbol_pipe=$lt_global_symbol_pipe ++global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + + # Transform the output of nm in a proper C declaration +-global_symbol_to_cdecl=$lt_global_symbol_to_cdecl ++global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl ++ ++# Transform the output of nm in a C name address pair ++global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + + # This is the shared library runtime path variable. + runpath_var=$runpath_var +@@ -4784,36 +18280,45 @@ + shlibpath_overrides_runpath=$shlibpath_overrides_runpath + + # How to hardcode a shared library path into an executable. +-hardcode_action=$hardcode_action ++hardcode_action=$hardcode_action_RC + + # Whether we should hardcode library paths into libraries. + hardcode_into_libs=$hardcode_into_libs + + # Flag to hardcode \$libdir into a binary during linking. + # This must work even if \$libdir does not exist. +-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec ++hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC ++ ++# If ld is used when linking, flag to hardcode \$libdir into ++# a binary during linking. This must work even if \$libdir does ++# not exist. ++hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC + + # Whether we need a single -rpath flag with a separated argument. +-hardcode_libdir_separator=$lt_hardcode_libdir_separator ++hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC + +-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the ++# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the + # resulting binary. +-hardcode_direct=$hardcode_direct ++hardcode_direct=$hardcode_direct_RC + + # Set to yes if using the -LDIR flag during linking hardcodes DIR into the + # resulting binary. +-hardcode_minus_L=$hardcode_minus_L ++hardcode_minus_L=$hardcode_minus_L_RC + + # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into + # the resulting binary. +-hardcode_shlibpath_var=$hardcode_shlibpath_var ++hardcode_shlibpath_var=$hardcode_shlibpath_var_RC ++ ++# Set to yes if building a shared library automatically hardcodes DIR into the library ++# and all subsequent libraries and executables linked against it. ++hardcode_automatic=$hardcode_automatic_RC + + # Variables whose values should be saved in libtool wrapper scripts and + # restored at relink time. + variables_saved_for_relink="$variables_saved_for_relink" + + # Whether libtool must link a program against all its dependency libraries. +-link_all_deplibs=$link_all_deplibs ++link_all_deplibs=$link_all_deplibs_RC + + # Compile-time system search path for libraries + sys_lib_search_path_spec=$lt_sys_lib_search_path_spec +@@ -4822,234 +18327,75 @@ + sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + + # Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path="$fix_srcfile_path" ++fix_srcfile_path="$fix_srcfile_path_RC" + + # Set to yes if exported symbols are required. +-always_export_symbols=$always_export_symbols ++always_export_symbols=$always_export_symbols_RC + + # The commands to list exported symbols. +-export_symbols_cmds=$lt_export_symbols_cmds ++export_symbols_cmds=$lt_export_symbols_cmds_RC + + # The commands to extract the exported symbol list from a shared archive. + extract_expsyms_cmds=$lt_extract_expsyms_cmds + + # Symbols that should not be listed in the preloaded symbols. +-exclude_expsyms=$lt_exclude_expsyms ++exclude_expsyms=$lt_exclude_expsyms_RC + + # Symbols that must always be exported. +-include_expsyms=$lt_include_expsyms ++include_expsyms=$lt_include_expsyms_RC + +-# ### END LIBTOOL CONFIG ++# ### END LIBTOOL TAG CONFIG: $tagname + + __EOF__ + +- case $host_os in +- aix3*) +- cat <<\EOF >> "${ofile}T" + +-# AIX sometimes has problems with the GCC collect2 program. For some +-# reason, if we set the COLLECT_NAMES environment variable, the problems +-# vanish in a puff of smoke. +-if test "X${COLLECT_NAMES+set}" != Xset; then +- COLLECT_NAMES= +- export COLLECT_NAMES ++else ++ # If there is no Makefile yet, we rely on a make rule to execute ++ # `config.status --recheck' to rerun these tests and create the ++ # libtool script then. ++ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` ++ if test -f "$ltmain_in"; then ++ test -f Makefile && make "$ltmain" ++ fi + fi +-EOF +- ;; +- esac + +- case $host_os in +- cygwin* | mingw* | pw32* | os2*) +- cat <<'EOF' >> "${ofile}T" +- # This is a source program that is used to create dlls on Windows +- # Don't remove nor modify the starting and closing comments +-# /* ltdll.c starts here */ +-# #define WIN32_LEAN_AND_MEAN +-# #include +-# #undef WIN32_LEAN_AND_MEAN +-# #include +-# +-# #ifndef __CYGWIN__ +-# # ifdef __CYGWIN32__ +-# # define __CYGWIN__ __CYGWIN32__ +-# # endif +-# #endif +-# +-# #ifdef __cplusplus +-# extern "C" { +-# #endif +-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); +-# #ifdef __cplusplus +-# } +-# #endif +-# +-# #ifdef __CYGWIN__ +-# #include +-# DECLARE_CYGWIN_DLL( DllMain ); +-# #endif +-# HINSTANCE __hDllInstance_base; +-# +-# BOOL APIENTRY +-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) +-# { +-# __hDllInstance_base = hInst; +-# return TRUE; +-# } +-# /* ltdll.c ends here */ +- # This is a source program that is used to create import libraries +- # on Windows for dlls which lack them. Don't remove nor modify the +- # starting and closing comments +-# /* impgen.c starts here */ +-# /* Copyright (C) 1999-2000 Free Software Foundation, Inc. +-# +-# This file is part of GNU libtool. +-# +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2 of the License, or +-# (at your option) any later version. +-# +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +-# +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +-# */ +-# +-# #include /* for printf() */ +-# #include /* for open(), lseek(), read() */ +-# #include /* for O_RDONLY, O_BINARY */ +-# #include /* for strdup() */ +-# +-# /* O_BINARY isn't required (or even defined sometimes) under Unix */ +-# #ifndef O_BINARY +-# #define O_BINARY 0 +-# #endif +-# +-# static unsigned int +-# pe_get16 (fd, offset) +-# int fd; +-# int offset; +-# { +-# unsigned char b[2]; +-# lseek (fd, offset, SEEK_SET); +-# read (fd, b, 2); +-# return b[0] + (b[1]<<8); +-# } +-# +-# static unsigned int +-# pe_get32 (fd, offset) +-# int fd; +-# int offset; +-# { +-# unsigned char b[4]; +-# lseek (fd, offset, SEEK_SET); +-# read (fd, b, 4); +-# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); +-# } +-# +-# static unsigned int +-# pe_as32 (ptr) +-# void *ptr; +-# { +-# unsigned char *b = ptr; +-# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); +-# } +-# +-# int +-# main (argc, argv) +-# int argc; +-# char *argv[]; +-# { +-# int dll; +-# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; +-# unsigned long export_rva, export_size, nsections, secptr, expptr; +-# unsigned long name_rvas, nexp; +-# unsigned char *expdata, *erva; +-# char *filename, *dll_name; +-# +-# filename = argv[1]; +-# +-# dll = open(filename, O_RDONLY|O_BINARY); +-# if (dll < 1) +-# return 1; +-# +-# dll_name = filename; +-# +-# for (i=0; filename[i]; i++) +-# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') +-# dll_name = filename + i +1; +-# +-# pe_header_offset = pe_get32 (dll, 0x3c); +-# opthdr_ofs = pe_header_offset + 4 + 20; +-# num_entries = pe_get32 (dll, opthdr_ofs + 92); +-# +-# if (num_entries < 1) /* no exports */ +-# return 1; +-# +-# export_rva = pe_get32 (dll, opthdr_ofs + 96); +-# export_size = pe_get32 (dll, opthdr_ofs + 100); +-# nsections = pe_get16 (dll, pe_header_offset + 4 +2); +-# secptr = (pe_header_offset + 4 + 20 + +-# pe_get16 (dll, pe_header_offset + 4 + 16)); +-# +-# expptr = 0; +-# for (i = 0; i < nsections; i++) +-# { +-# char sname[8]; +-# unsigned long secptr1 = secptr + 40 * i; +-# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); +-# unsigned long vsize = pe_get32 (dll, secptr1 + 16); +-# unsigned long fptr = pe_get32 (dll, secptr1 + 20); +-# lseek(dll, secptr1, SEEK_SET); +-# read(dll, sname, 8); +-# if (vaddr <= export_rva && vaddr+vsize > export_rva) +-# { +-# expptr = fptr + (export_rva - vaddr); +-# if (export_rva + export_size > vaddr + vsize) +-# export_size = vsize - (export_rva - vaddr); +-# break; +-# } +-# } +-# +-# expdata = (unsigned char*)malloc(export_size); +-# lseek (dll, expptr, SEEK_SET); +-# read (dll, expdata, export_size); +-# erva = expdata - export_rva; +-# +-# nexp = pe_as32 (expdata+24); +-# name_rvas = pe_as32 (expdata+32); +-# +-# printf ("EXPORTS\n"); +-# for (i = 0; i> "${ofile}T" || (rm -f "${ofile}T"; exit 1) ++CC="$lt_save_CC" + +- mv -f "${ofile}T" "$ofile" || \ +- (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T") +- chmod +x "$ofile" +-fi ++ ;; ++ ++ *) ++ { { echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5 ++echo "$as_me: error: Unsupported tag name: $tagname" >&2;} ++ { (exit 1); exit 1; }; } ++ ;; ++ esac + ++ # Append the new tag name to the list of available tags. ++ if test -n "$tagname" ; then ++ available_tags="$available_tags $tagname" ++ fi ++ fi ++ done ++ IFS="$lt_save_ifs" + ++ # Now substitute the updated list of available tags. ++ if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then ++ mv "${ofile}T" "$ofile" ++ chmod +x "$ofile" ++ else ++ rm -f "${ofile}T" ++ { { echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5 ++echo "$as_me: error: unable to update list of available tagged configurations." >&2;} ++ { (exit 1); exit 1; }; } ++ fi ++fi + + + +@@ -5063,19 +18409,36 @@ + + + +-# If we find X, set shell vars x_includes and x_libraries to the +-# paths, otherwise set no_x=yes. +-# Uses ac_ vars as temps to allow command line to override cache and checks. +-# --without-x overrides everything else, but does not touch the cache. +-echo $ac_n "checking for X""... $ac_c" 1>&6 +-echo "configure:5072: checking for X" >&5 ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++if test "x$ac_path_x_has_been_run" != xyes; then ++ echo "$as_me:$LINENO: checking for X" >&5 ++echo $ECHO_N "checking for X... $ECHO_C" >&6 ++ ++ac_path_x_has_been_run=yes + + # Check whether --with-x or --without-x was given. + if test "${with_x+set}" = set; then + withval="$with_x" +- : +-fi + ++fi; + # $have_x is `yes', `no', `disabled', or empty when we do not yet know. + if test "x$with_x" = xno; then + # The user explicitly disabled X. +@@ -5085,207 +18448,209 @@ + # Both variables are already set. + have_x=yes + else +-if eval "test \"`echo '$''{'ac_cv_have_x'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++ if test "${ac_cv_have_x+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + # One or both of the vars are not set, and there is no cached value. +-ac_x_includes=NO ac_x_libraries=NO +-rm -fr conftestdir +-if mkdir conftestdir; then +- cd conftestdir ++ac_x_includes=no ac_x_libraries=no ++rm -fr conftest.dir ++if mkdir conftest.dir; then ++ cd conftest.dir + # Make sure to not put "make" in the Imakefile rules, since we grep it out. +- cat > Imakefile <<'EOF' ++ cat >Imakefile <<'_ACEOF' + acfindx: + @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"' +-EOF ++_ACEOF + if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then + # GNU make sometimes prints "make[1]: Entering...", which would confuse us. + eval `${MAKE-make} acfindx 2>/dev/null | grep -v make` + # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. + for ac_extension in a so sl; do + if test ! -f $ac_im_usrlibdir/libX11.$ac_extension && +- test -f $ac_im_libdir/libX11.$ac_extension; then +- ac_im_usrlibdir=$ac_im_libdir; break ++ test -f $ac_im_libdir/libX11.$ac_extension; then ++ ac_im_usrlibdir=$ac_im_libdir; break + fi + done + # Screen out bogus values from the imake configuration. They are + # bogus both because they are the default anyway, and because + # using them would break gcc on systems where it needs fixed includes. +- case "$ac_im_incroot" in ++ case $ac_im_incroot in + /usr/include) ;; +- *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes="$ac_im_incroot" ;; ++ *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;; + esac +- case "$ac_im_usrlibdir" in ++ case $ac_im_usrlibdir in + /usr/lib | /lib) ;; +- *) test -d "$ac_im_usrlibdir" && ac_x_libraries="$ac_im_usrlibdir" ;; ++ *) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;; + esac + fi + cd .. +- rm -fr conftestdir ++ rm -fr conftest.dir + fi + +-if test "$ac_x_includes" = NO; then +- # Guess where to find include files, by looking for this one X11 .h file. +- test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h ++# Standard set of common directories for X headers. ++# Check X11 before X11Rn because it is often a symlink to the current release. ++ac_x_header_dirs=' ++/usr/X11/include ++/usr/X11R6/include ++/usr/X11R5/include ++/usr/X11R4/include ++ ++/usr/include/X11 ++/usr/include/X11R6 ++/usr/include/X11R5 ++/usr/include/X11R4 ++ ++/usr/local/X11/include ++/usr/local/X11R6/include ++/usr/local/X11R5/include ++/usr/local/X11R4/include ++ ++/usr/local/include/X11 ++/usr/local/include/X11R6 ++/usr/local/include/X11R5 ++/usr/local/include/X11R4 ++ ++/usr/X386/include ++/usr/x386/include ++/usr/XFree86/include/X11 ++ ++/usr/include ++/usr/local/include ++/usr/unsupported/include ++/usr/athena/include ++/usr/local/x11r5/include ++/usr/lpp/Xamples/include ++ ++/usr/openwin/include ++/usr/openwin/share/include' + ++if test "$ac_x_includes" = no; then ++ # Guess where to find include files, by looking for a specified header file. + # First, try using that file with no special directory specified. +-cat > conftest.$ac_ext < +-EOF +-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +-{ (eval echo configure:5139: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +-if test -z "$ac_err"; then +- rm -rf conftest* ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++_ACEOF ++if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 ++ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null; then ++ if test -s conftest.err; then ++ ac_cpp_err=$ac_c_preproc_warn_flag ++ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag ++ else ++ ac_cpp_err= ++ fi ++else ++ ac_cpp_err=yes ++fi ++if test -z "$ac_cpp_err"; then + # We can compile using X headers with no special include directory. + ac_x_includes= + else +- echo "$ac_err" >&5 +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- # Look for the header file in a standard set of common directories. +-# Check X11 before X11Rn because it is often a symlink to the current release. +- for ac_dir in \ +- /usr/X11/include \ +- /usr/X11R6/include \ +- /usr/X11R5/include \ +- /usr/X11R4/include \ +- \ +- /usr/include/X11 \ +- /usr/include/X11R6 \ +- /usr/include/X11R5 \ +- /usr/include/X11R4 \ +- \ +- /usr/local/X11/include \ +- /usr/local/X11R6/include \ +- /usr/local/X11R5/include \ +- /usr/local/X11R4/include \ +- \ +- /usr/local/include/X11 \ +- /usr/local/include/X11R6 \ +- /usr/local/include/X11R5 \ +- /usr/local/include/X11R4 \ +- \ +- /usr/X386/include \ +- /usr/x386/include \ +- /usr/XFree86/include/X11 \ +- \ +- /usr/include \ +- /usr/local/include \ +- /usr/unsupported/include \ +- /usr/athena/include \ +- /usr/local/x11r5/include \ +- /usr/lpp/Xamples/include \ +- \ +- /usr/openwin/include \ +- /usr/openwin/share/include \ +- ; \ +- do +- if test -r "$ac_dir/$x_direct_test_include"; then +- ac_x_includes=$ac_dir +- break +- fi +- done ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ for ac_dir in $ac_x_header_dirs; do ++ if test -r "$ac_dir/X11/Xlib.h"; then ++ ac_x_includes=$ac_dir ++ break ++ fi ++done + fi +-rm -f conftest* +-fi # $ac_x_includes = NO ++rm -f conftest.err conftest.$ac_ext ++fi # $ac_x_includes = no + +-if test "$ac_x_libraries" = NO; then ++if test "$ac_x_libraries" = no; then + # Check for the libraries. +- +- test -z "$x_direct_test_library" && x_direct_test_library=Xt +- test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc +- + # See if we find them without any special options. + # Don't add to $LIBS permanently. +- ac_save_LIBS="$LIBS" +- LIBS="-l$x_direct_test_library $LIBS" +-cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +- rm -rf conftest* +- LIBS="$ac_save_LIBS" ++ ac_save_LIBS=$LIBS ++ LIBS="-lX11 $LIBS" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++int ++main () ++{ ++XrmInitialize () ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ LIBS=$ac_save_LIBS + # We can link X programs with no special library path. + ac_x_libraries= + else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- LIBS="$ac_save_LIBS" +-# First see if replacing the include by lib works. +-# Check X11 before X11Rn because it is often a symlink to the current release. +-for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \ +- /usr/X11/lib \ +- /usr/X11R6/lib \ +- /usr/X11R5/lib \ +- /usr/X11R4/lib \ +- \ +- /usr/lib/X11 \ +- /usr/lib/X11R6 \ +- /usr/lib/X11R5 \ +- /usr/lib/X11R4 \ +- \ +- /usr/local/X11/lib \ +- /usr/local/X11R6/lib \ +- /usr/local/X11R5/lib \ +- /usr/local/X11R4/lib \ +- \ +- /usr/local/lib/X11 \ +- /usr/local/lib/X11R6 \ +- /usr/local/lib/X11R5 \ +- /usr/local/lib/X11R4 \ +- \ +- /usr/X386/lib \ +- /usr/x386/lib \ +- /usr/XFree86/lib/X11 \ +- \ +- /usr/lib \ +- /usr/local/lib \ +- /usr/unsupported/lib \ +- /usr/athena/lib \ +- /usr/local/x11r5/lib \ +- /usr/lpp/Xamples/lib \ +- /lib/usr/lib/X11 \ +- \ +- /usr/openwin/lib \ +- /usr/openwin/share/lib \ +- ; \ ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++LIBS=$ac_save_LIBS ++for ac_dir in `echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g` + do ++ # Don't even attempt the hair of trying to link an X program! + for ac_extension in a so sl; do +- if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then ++ if test -r $ac_dir/libX11.$ac_extension; then + ac_x_libraries=$ac_dir + break 2 + fi + done + done + fi +-rm -f conftest* +-fi # $ac_x_libraries = NO ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++fi # $ac_x_libraries = no + +-if test "$ac_x_includes" = NO || test "$ac_x_libraries" = NO; then ++if test "$ac_x_includes" = no || test "$ac_x_libraries" = no; then + # Didn't find X anywhere. Cache the known absence of X. + ac_cv_have_x="have_x=no" + else + # Record where we found X for the cache. + ac_cv_have_x="have_x=yes \ +- ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries" ++ ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries" + fi + fi ++ + fi + eval "$ac_cv_have_x" + fi # $with_x != no + + if test "$have_x" != yes; then +- echo "$ac_t""$have_x" 1>&6 ++ echo "$as_me:$LINENO: result: $have_x" >&5 ++echo "${ECHO_T}$have_x" >&6 + no_x=yes + else + # If each of the values was on the command line, it overrides each guess. +@@ -5294,14 +18659,21 @@ + # Update the cache value to reflect the command line values. + ac_cv_have_x="have_x=yes \ + ac_x_includes=$x_includes ac_x_libraries=$x_libraries" +- echo "$ac_t""libraries $x_libraries, headers $x_includes" 1>&6 ++ # It might be that x_includes is empty (headers are found in the ++ # standard search path. Then output the corresponding message ++ ac_out_x_includes=$x_includes ++ test "x$x_includes" = x && ac_out_x_includes="in standard search path" ++ echo "$as_me:$LINENO: result: libraries $x_libraries, headers $ac_out_x_includes" >&5 ++echo "${ECHO_T}libraries $x_libraries, headers $ac_out_x_includes" >&6 + fi + ++fi + if test "$no_x" = yes; then + # Not all programs may use this symbol, but it does not hurt to define it. +- cat >> confdefs.h <<\EOF ++ ++cat >>confdefs.h <<\_ACEOF + #define X_DISPLAY_MISSING 1 +-EOF ++_ACEOF + + X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS= + else +@@ -5314,60 +18686,117 @@ + X_LIBS="$X_LIBS -L$x_libraries" + # For Solaris; some versions of Sun CC require a space after -R and + # others require no space. Words are not sufficient . . . . +- case "`(uname -sr) 2>/dev/null`" in ++ case `(uname -sr) 2>/dev/null` in + "SunOS 5"*) +- echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6 +-echo "configure:5321: checking whether -R must be followed by a space" >&5 +- ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries" +- cat > conftest.$ac_ext <&5 ++echo $ECHO_N "checking whether -R must be followed by a space... $ECHO_C" >&6 ++ ac_xsave_LIBS=$LIBS; LIBS="$LIBS -R$x_libraries" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +-int main() { ++int ++main () ++{ + +-; return 0; } +-EOF +-if { (eval echo configure:5331: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +- rm -rf conftest* ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then + ac_R_nospace=yes + else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- ac_R_nospace=no ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ac_R_nospace=no + fi +-rm -f conftest* ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + if test $ac_R_nospace = yes; then +- echo "$ac_t""no" 1>&6 ++ echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6 + X_LIBS="$X_LIBS -R$x_libraries" + else + LIBS="$ac_xsave_LIBS -R $x_libraries" +- cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +-int main() { ++int ++main () ++{ + +-; return 0; } +-EOF +-if { (eval echo configure:5354: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +- rm -rf conftest* ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then + ac_R_space=yes + else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- ac_R_space=no ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ac_R_space=no + fi +-rm -f conftest* ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + if test $ac_R_space = yes; then +- echo "$ac_t""yes" 1>&6 ++ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6 + X_LIBS="$X_LIBS -R $x_libraries" + else +- echo "$ac_t""neither works" 1>&6 ++ echo "$as_me:$LINENO: result: neither works" >&5 ++echo "${ECHO_T}neither works" >&6 + fi + fi +- LIBS="$ac_xsave_LIBS" ++ LIBS=$ac_xsave_LIBS + esac + fi + +@@ -5378,565 +18807,1075 @@ + if test "$ISC" = yes; then + X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet" + else +- # Martyn.Johnson@cl.cam.ac.uk says this is needed for Ultrix, if the X +- # libraries were built with DECnet support. And karl@cs.umb.edu says ++ # Martyn Johnson says this is needed for Ultrix, if the X ++ # libraries were built with DECnet support. And Karl Berry says + # the Alpha needs dnet_stub (dnet does not exist). +- echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6 +-echo "configure:5386: checking for dnet_ntoa in -ldnet" >&5 +-ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'` +-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- ac_save_LIBS="$LIBS" +-LIBS="-ldnet $LIBS" +-cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ + /* Override any gcc2 internal prototype to avoid an error. */ ++#ifdef __cplusplus ++extern "C" ++#endif + /* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dnet_ntoa(); ++ builtin and then its argument prototype would still apply. */ ++char XOpenDisplay (); ++int ++main () ++{ ++XOpenDisplay (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ : ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-int main() { +-dnet_ntoa() +-; return 0; } +-EOF +-if { (eval echo configure:5405: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +- rm -rf conftest* +- eval "ac_cv_lib_$ac_lib_var=yes" ++echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet" >&5 ++echo $ECHO_N "checking for dnet_ntoa in -ldnet... $ECHO_C" >&6 ++if test "${ac_cv_lib_dnet_dnet_ntoa+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_lib_$ac_lib_var=no" +-fi +-rm -f conftest* +-LIBS="$ac_save_LIBS" ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldnet $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +-fi +-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then +- echo "$ac_t""yes" 1>&6 ++/* Override any gcc2 internal prototype to avoid an error. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++/* We use char because int might match the return type of a gcc2 ++ builtin and then its argument prototype would still apply. */ ++char dnet_ntoa (); ++int ++main () ++{ ++dnet_ntoa (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_cv_lib_dnet_dnet_ntoa=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ac_cv_lib_dnet_dnet_ntoa=no ++fi ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_dnet_ntoa" >&5 ++echo "${ECHO_T}$ac_cv_lib_dnet_dnet_ntoa" >&6 ++if test $ac_cv_lib_dnet_dnet_ntoa = yes; then + X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet" +-else +- echo "$ac_t""no" 1>&6 + fi + + if test $ac_cv_lib_dnet_dnet_ntoa = no; then +- echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6 +-echo "configure:5427: checking for dnet_ntoa in -ldnet_stub" >&5 +-ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'` +-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++ echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet_stub" >&5 ++echo $ECHO_N "checking for dnet_ntoa in -ldnet_stub... $ECHO_C" >&6 ++if test "${ac_cv_lib_dnet_stub_dnet_ntoa+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_save_LIBS="$LIBS" ++ ac_check_lib_save_LIBS=$LIBS + LIBS="-ldnet_stub $LIBS" +-cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ + /* Override any gcc2 internal prototype to avoid an error. */ ++#ifdef __cplusplus ++extern "C" ++#endif + /* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dnet_ntoa(); +- +-int main() { +-dnet_ntoa() +-; return 0; } +-EOF +-if { (eval echo configure:5446: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +- rm -rf conftest* +- eval "ac_cv_lib_$ac_lib_var=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_lib_$ac_lib_var=no" +-fi +-rm -f conftest* +-LIBS="$ac_save_LIBS" +- +-fi +-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then +- echo "$ac_t""yes" 1>&6 ++ builtin and then its argument prototype would still apply. */ ++char dnet_ntoa (); ++int ++main () ++{ ++dnet_ntoa (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_cv_lib_dnet_stub_dnet_ntoa=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ac_cv_lib_dnet_stub_dnet_ntoa=no ++fi ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5 ++echo "${ECHO_T}$ac_cv_lib_dnet_stub_dnet_ntoa" >&6 ++if test $ac_cv_lib_dnet_stub_dnet_ntoa = yes; then + X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub" +-else +- echo "$ac_t""no" 1>&6 + fi + + fi ++fi ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++ LIBS="$ac_xsave_LIBS" + + # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT, + # to get the SysV transport functions. +- # chad@anasazi.com says the Pyramis MIS-ES running DC/OSx (SVR4) ++ # Chad R. Larson says the Pyramis MIS-ES running DC/OSx (SVR4) + # needs -lnsl. + # The nsl library prevents programs from opening the X display +- # on Irix 5.2, according to dickey@clark.net. +- echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6 +-echo "configure:5475: checking for gethostbyname" >&5 +-if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <&5 ++echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6 ++if test "${ac_cv_func_gethostbyname+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define gethostbyname to an innocuous variant, in case declares gethostbyname. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define gethostbyname innocuous_gethostbyname ++ + /* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char gethostbyname(); below. */ +-#include +-/* Override any gcc2 internal prototype to avoid an error. */ +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char gethostbyname(); ++ which can conflict with char gethostbyname (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif + +-int main() { ++#undef gethostbyname + ++/* Override any gcc2 internal prototype to avoid an error. */ ++#ifdef __cplusplus ++extern "C" ++{ ++#endif ++/* We use char because int might match the return type of a gcc2 ++ builtin and then its argument prototype would still apply. */ ++char gethostbyname (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ + #if defined (__stub_gethostbyname) || defined (__stub___gethostbyname) + choke me + #else +-gethostbyname(); ++char (*f) () = gethostbyname; ++#endif ++#ifdef __cplusplus ++} + #endif + +-; return 0; } +-EOF +-if { (eval echo configure:5503: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +- rm -rf conftest* +- eval "ac_cv_func_gethostbyname=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_func_gethostbyname=no" +-fi +-rm -f conftest* +-fi ++int ++main () ++{ ++return f != gethostbyname; ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_cv_func_gethostbyname=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-if eval "test \"`echo '$ac_cv_func_'gethostbyname`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- : +-else +- echo "$ac_t""no" 1>&6 ++ac_cv_func_gethostbyname=no + fi ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5 ++echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6 + + if test $ac_cv_func_gethostbyname = no; then +- echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6 +-echo "configure:5524: checking for gethostbyname in -lnsl" >&5 +-ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'` +-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++ echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 ++echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6 ++if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_save_LIBS="$LIBS" ++ ac_check_lib_save_LIBS=$LIBS + LIBS="-lnsl $LIBS" +-cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ + /* Override any gcc2 internal prototype to avoid an error. */ ++#ifdef __cplusplus ++extern "C" ++#endif + /* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char gethostbyname(); +- +-int main() { +-gethostbyname() +-; return 0; } +-EOF +-if { (eval echo configure:5543: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +- rm -rf conftest* +- eval "ac_cv_lib_$ac_lib_var=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_lib_$ac_lib_var=no" ++ builtin and then its argument prototype would still apply. */ ++char gethostbyname (); ++int ++main () ++{ ++gethostbyname (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_cv_lib_nsl_gethostbyname=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ac_cv_lib_nsl_gethostbyname=no ++fi ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5 ++echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6 ++if test $ac_cv_lib_nsl_gethostbyname = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl" + fi +-rm -f conftest* +-LIBS="$ac_save_LIBS" + +-fi +-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl" +-else +- echo "$ac_t""no" 1>&6 ++ if test $ac_cv_lib_nsl_gethostbyname = no; then ++ echo "$as_me:$LINENO: checking for gethostbyname in -lbsd" >&5 ++echo $ECHO_N "checking for gethostbyname in -lbsd... $ECHO_C" >&6 ++if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lbsd $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any gcc2 internal prototype to avoid an error. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++/* We use char because int might match the return type of a gcc2 ++ builtin and then its argument prototype would still apply. */ ++char gethostbyname (); ++int ++main () ++{ ++gethostbyname (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_cv_lib_bsd_gethostbyname=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ac_cv_lib_bsd_gethostbyname=no ++fi ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_gethostbyname" >&5 ++echo "${ECHO_T}$ac_cv_lib_bsd_gethostbyname" >&6 ++if test $ac_cv_lib_bsd_gethostbyname = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -lbsd" + fi + ++ fi + fi + + # lieder@skyler.mavd.honeywell.com says without -lsocket, + # socket/setsockopt and other routines are undefined under SCO ODT + # 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary +- # on later versions), says simon@lia.di.epfl.ch: it contains +- # gethostby* variants that don't use the nameserver (or something). +- # -lsocket must be given before -lnsl if both are needed. +- # We assume that if connect needs -lnsl, so does gethostbyname. +- echo $ac_n "checking for connect""... $ac_c" 1>&6 +-echo "configure:5573: checking for connect" >&5 +-if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <&5 ++echo $ECHO_N "checking for connect... $ECHO_C" >&6 ++if test "${ac_cv_func_connect+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define connect to an innocuous variant, in case declares connect. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define connect innocuous_connect ++ + /* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char connect(); below. */ +-#include +-/* Override any gcc2 internal prototype to avoid an error. */ +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char connect(); ++ which can conflict with char connect (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ + +-int main() { ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif + ++#undef connect ++ ++/* Override any gcc2 internal prototype to avoid an error. */ ++#ifdef __cplusplus ++extern "C" ++{ ++#endif ++/* We use char because int might match the return type of a gcc2 ++ builtin and then its argument prototype would still apply. */ ++char connect (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ + #if defined (__stub_connect) || defined (__stub___connect) + choke me + #else +-connect(); ++char (*f) () = connect; ++#endif ++#ifdef __cplusplus ++} + #endif + +-; return 0; } +-EOF +-if { (eval echo configure:5601: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +- rm -rf conftest* +- eval "ac_cv_func_connect=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_func_connect=no" +-fi +-rm -f conftest* +-fi ++int ++main () ++{ ++return f != connect; ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_cv_func_connect=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-if eval "test \"`echo '$ac_cv_func_'connect`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- : +-else +- echo "$ac_t""no" 1>&6 ++ac_cv_func_connect=no + fi ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5 ++echo "${ECHO_T}$ac_cv_func_connect" >&6 + + if test $ac_cv_func_connect = no; then +- echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6 +-echo "configure:5622: checking for connect in -lsocket" >&5 +-ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'` +-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++ echo "$as_me:$LINENO: checking for connect in -lsocket" >&5 ++echo $ECHO_N "checking for connect in -lsocket... $ECHO_C" >&6 ++if test "${ac_cv_lib_socket_connect+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_save_LIBS="$LIBS" ++ ac_check_lib_save_LIBS=$LIBS + LIBS="-lsocket $X_EXTRA_LIBS $LIBS" +-cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ + /* Override any gcc2 internal prototype to avoid an error. */ ++#ifdef __cplusplus ++extern "C" ++#endif + /* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char connect(); +- +-int main() { +-connect() +-; return 0; } +-EOF +-if { (eval echo configure:5641: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +- rm -rf conftest* +- eval "ac_cv_lib_$ac_lib_var=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_lib_$ac_lib_var=no" +-fi +-rm -f conftest* +-LIBS="$ac_save_LIBS" +- +-fi +-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then +- echo "$ac_t""yes" 1>&6 ++ builtin and then its argument prototype would still apply. */ ++char connect (); ++int ++main () ++{ ++connect (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_cv_lib_socket_connect=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ac_cv_lib_socket_connect=no ++fi ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++echo "$as_me:$LINENO: result: $ac_cv_lib_socket_connect" >&5 ++echo "${ECHO_T}$ac_cv_lib_socket_connect" >&6 ++if test $ac_cv_lib_socket_connect = yes; then + X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS" +-else +- echo "$ac_t""no" 1>&6 + fi + + fi + +- # gomez@mi.uni-erlangen.de says -lposix is necessary on A/UX. +- echo $ac_n "checking for remove""... $ac_c" 1>&6 +-echo "configure:5665: checking for remove" >&5 +-if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <&5 ++echo $ECHO_N "checking for remove... $ECHO_C" >&6 ++if test "${ac_cv_func_remove+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define remove to an innocuous variant, in case declares remove. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define remove innocuous_remove ++ + /* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char remove(); below. */ +-#include +-/* Override any gcc2 internal prototype to avoid an error. */ +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char remove(); ++ which can conflict with char remove (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif + +-int main() { ++#undef remove + ++/* Override any gcc2 internal prototype to avoid an error. */ ++#ifdef __cplusplus ++extern "C" ++{ ++#endif ++/* We use char because int might match the return type of a gcc2 ++ builtin and then its argument prototype would still apply. */ ++char remove (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ + #if defined (__stub_remove) || defined (__stub___remove) + choke me + #else +-remove(); ++char (*f) () = remove; ++#endif ++#ifdef __cplusplus ++} + #endif + +-; return 0; } +-EOF +-if { (eval echo configure:5693: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +- rm -rf conftest* +- eval "ac_cv_func_remove=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_func_remove=no" +-fi +-rm -f conftest* +-fi ++int ++main () ++{ ++return f != remove; ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_cv_func_remove=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-if eval "test \"`echo '$ac_cv_func_'remove`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- : +-else +- echo "$ac_t""no" 1>&6 ++ac_cv_func_remove=no + fi ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++echo "$as_me:$LINENO: result: $ac_cv_func_remove" >&5 ++echo "${ECHO_T}$ac_cv_func_remove" >&6 + + if test $ac_cv_func_remove = no; then +- echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6 +-echo "configure:5714: checking for remove in -lposix" >&5 +-ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'` +-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++ echo "$as_me:$LINENO: checking for remove in -lposix" >&5 ++echo $ECHO_N "checking for remove in -lposix... $ECHO_C" >&6 ++if test "${ac_cv_lib_posix_remove+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_save_LIBS="$LIBS" ++ ac_check_lib_save_LIBS=$LIBS + LIBS="-lposix $LIBS" +-cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ + /* Override any gcc2 internal prototype to avoid an error. */ ++#ifdef __cplusplus ++extern "C" ++#endif + /* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char remove(); +- +-int main() { +-remove() +-; return 0; } +-EOF +-if { (eval echo configure:5733: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +- rm -rf conftest* +- eval "ac_cv_lib_$ac_lib_var=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_lib_$ac_lib_var=no" +-fi +-rm -f conftest* +-LIBS="$ac_save_LIBS" +- +-fi +-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then +- echo "$ac_t""yes" 1>&6 ++ builtin and then its argument prototype would still apply. */ ++char remove (); ++int ++main () ++{ ++remove (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_cv_lib_posix_remove=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ac_cv_lib_posix_remove=no ++fi ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++echo "$as_me:$LINENO: result: $ac_cv_lib_posix_remove" >&5 ++echo "${ECHO_T}$ac_cv_lib_posix_remove" >&6 ++if test $ac_cv_lib_posix_remove = yes; then + X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix" +-else +- echo "$ac_t""no" 1>&6 + fi + + fi + + # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. +- echo $ac_n "checking for shmat""... $ac_c" 1>&6 +-echo "configure:5757: checking for shmat" >&5 +-if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <&5 ++echo $ECHO_N "checking for shmat... $ECHO_C" >&6 ++if test "${ac_cv_func_shmat+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define shmat to an innocuous variant, in case declares shmat. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define shmat innocuous_shmat ++ + /* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char shmat(); below. */ +-#include +-/* Override any gcc2 internal prototype to avoid an error. */ +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char shmat(); ++ which can conflict with char shmat (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ + +-int main() { ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif + ++#undef shmat ++ ++/* Override any gcc2 internal prototype to avoid an error. */ ++#ifdef __cplusplus ++extern "C" ++{ ++#endif ++/* We use char because int might match the return type of a gcc2 ++ builtin and then its argument prototype would still apply. */ ++char shmat (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ + #if defined (__stub_shmat) || defined (__stub___shmat) + choke me + #else +-shmat(); ++char (*f) () = shmat; ++#endif ++#ifdef __cplusplus ++} + #endif + +-; return 0; } +-EOF +-if { (eval echo configure:5785: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +- rm -rf conftest* +- eval "ac_cv_func_shmat=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_func_shmat=no" +-fi +-rm -f conftest* +-fi ++int ++main () ++{ ++return f != shmat; ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_cv_func_shmat=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-if eval "test \"`echo '$ac_cv_func_'shmat`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- : +-else +- echo "$ac_t""no" 1>&6 ++ac_cv_func_shmat=no + fi ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++echo "$as_me:$LINENO: result: $ac_cv_func_shmat" >&5 ++echo "${ECHO_T}$ac_cv_func_shmat" >&6 + + if test $ac_cv_func_shmat = no; then +- echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6 +-echo "configure:5806: checking for shmat in -lipc" >&5 +-ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'` +-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++ echo "$as_me:$LINENO: checking for shmat in -lipc" >&5 ++echo $ECHO_N "checking for shmat in -lipc... $ECHO_C" >&6 ++if test "${ac_cv_lib_ipc_shmat+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_save_LIBS="$LIBS" ++ ac_check_lib_save_LIBS=$LIBS + LIBS="-lipc $LIBS" +-cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ + /* Override any gcc2 internal prototype to avoid an error. */ ++#ifdef __cplusplus ++extern "C" ++#endif + /* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char shmat(); +- +-int main() { +-shmat() +-; return 0; } +-EOF +-if { (eval echo configure:5825: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +- rm -rf conftest* +- eval "ac_cv_lib_$ac_lib_var=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_lib_$ac_lib_var=no" +-fi +-rm -f conftest* +-LIBS="$ac_save_LIBS" +- +-fi +-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then +- echo "$ac_t""yes" 1>&6 ++ builtin and then its argument prototype would still apply. */ ++char shmat (); ++int ++main () ++{ ++shmat (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_cv_lib_ipc_shmat=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ac_cv_lib_ipc_shmat=no ++fi ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++echo "$as_me:$LINENO: result: $ac_cv_lib_ipc_shmat" >&5 ++echo "${ECHO_T}$ac_cv_lib_ipc_shmat" >&6 ++if test $ac_cv_lib_ipc_shmat = yes; then + X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc" +-else +- echo "$ac_t""no" 1>&6 + fi + + fi + fi + + # Check for libraries that X11R6 Xt/Xaw programs need. +- ac_save_LDFLAGS="$LDFLAGS" ++ ac_save_LDFLAGS=$LDFLAGS + test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries" + # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to + # check for ICE first), but we must link in the order -lSM -lICE or + # we get undefined symbols. So assume we have SM if we have ICE. + # These have to be linked with before -lX11, unlike the other + # libraries we check for below, so use a different variable. +- # --interran@uluru.Stanford.EDU, kb@cs.umb.edu. +- echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6 +-echo "configure:5858: checking for IceConnectionNumber in -lICE" >&5 +-ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'` +-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++ # John Interrante, Karl Berry ++ echo "$as_me:$LINENO: checking for IceConnectionNumber in -lICE" >&5 ++echo $ECHO_N "checking for IceConnectionNumber in -lICE... $ECHO_C" >&6 ++if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_save_LIBS="$LIBS" ++ ac_check_lib_save_LIBS=$LIBS + LIBS="-lICE $X_EXTRA_LIBS $LIBS" +-cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ + /* Override any gcc2 internal prototype to avoid an error. */ ++#ifdef __cplusplus ++extern "C" ++#endif + /* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char IceConnectionNumber(); +- +-int main() { +-IceConnectionNumber() +-; return 0; } +-EOF +-if { (eval echo configure:5877: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +- rm -rf conftest* +- eval "ac_cv_lib_$ac_lib_var=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_lib_$ac_lib_var=no" +-fi +-rm -f conftest* +-LIBS="$ac_save_LIBS" +- +-fi +-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then +- echo "$ac_t""yes" 1>&6 ++ builtin and then its argument prototype would still apply. */ ++char IceConnectionNumber (); ++int ++main () ++{ ++IceConnectionNumber (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_cv_lib_ICE_IceConnectionNumber=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ac_cv_lib_ICE_IceConnectionNumber=no ++fi ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++echo "$as_me:$LINENO: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5 ++echo "${ECHO_T}$ac_cv_lib_ICE_IceConnectionNumber" >&6 ++if test $ac_cv_lib_ICE_IceConnectionNumber = yes; then + X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE" +-else +- echo "$ac_t""no" 1>&6 + fi + +- LDFLAGS="$ac_save_LDFLAGS" ++ LDFLAGS=$ac_save_LDFLAGS + + fi + +-echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 +-echo "configure:5902: checking for ANSI C header files" >&5 +-if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++echo "$as_me:$LINENO: checking for ANSI C header files" >&5 ++echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 ++if test "${ac_cv_header_stdc+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + #include + #include + #include + #include +-EOF +-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +-{ (eval echo configure:5915: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +-if test -z "$ac_err"; then +- rm -rf conftest* ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest.$ac_objext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then + ac_cv_header_stdc=yes + else +- echo "$ac_err" >&5 +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- ac_cv_header_stdc=no ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ac_cv_header_stdc=no + fi +-rm -f conftest* ++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + + if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. +-cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + #include +-EOF ++ ++_ACEOF + if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- egrep "memchr" >/dev/null 2>&1; then ++ $EGREP "memchr" >/dev/null 2>&1; then + : + else +- rm -rf conftest* + ac_cv_header_stdc=no + fi + rm -f conftest* +@@ -5945,16 +19884,19 @@ + + if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. +-cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + #include +-EOF ++ ++_ACEOF + if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- egrep "free" >/dev/null 2>&1; then ++ $EGREP "free" >/dev/null 2>&1; then + : + else +- rm -rf conftest* + ac_cv_header_stdc=no + fi + rm -f conftest* +@@ -5963,180 +19905,358 @@ + + if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. +-if test "$cross_compiling" = yes; then ++ if test "$cross_compiling" = yes; then + : + else +- cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + #include +-#define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +-#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +-int main () { int i; for (i = 0; i < 256; i++) +-if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); +-exit (0); } ++#if ((' ' & 0x0FF) == 0x020) ++# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') ++# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) ++#else ++# define ISLOWER(c) \ ++ (('a' <= (c) && (c) <= 'i') \ ++ || ('j' <= (c) && (c) <= 'r') \ ++ || ('s' <= (c) && (c) <= 'z')) ++# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) ++#endif + +-EOF +-if { (eval echo configure:5982: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +-then ++#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) ++int ++main () ++{ ++ int i; ++ for (i = 0; i < 256; i++) ++ if (XOR (islower (i), ISLOWER (i)) ++ || toupper (i) != TOUPPER (i)) ++ exit(2); ++ exit (0); ++} ++_ACEOF ++rm -f conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ac_try='./conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then + : + else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -fr conftest* +- ac_cv_header_stdc=no ++ echo "$as_me: program exited with status $ac_status" >&5 ++echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++( exit $ac_status ) ++ac_cv_header_stdc=no + fi +-rm -fr conftest* ++rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi +- + fi + fi +- +-echo "$ac_t""$ac_cv_header_stdc" 1>&6 ++echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 ++echo "${ECHO_T}$ac_cv_header_stdc" >&6 + if test $ac_cv_header_stdc = yes; then +- cat >> confdefs.h <<\EOF ++ ++cat >>confdefs.h <<\_ACEOF + #define STDC_HEADERS 1 +-EOF ++_ACEOF + + fi + +-for ac_hdr in fcntl.h malloc.h sys/ioctl.h sys/time.h linux/joystick.h linux/soundcard.h ++ ++ ++ ++ ++ ++ ++for ac_header in fcntl.h malloc.h sys/ioctl.h sys/time.h linux/joystick.h linux/soundcard.h + do +-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +-echo "configure:6009: checking for $ac_hdr" >&5 +-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` ++if eval "test \"\${$as_ac_Header+set}\" = set"; then ++ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 ++if eval "test \"\${$as_ac_Header+set}\" = set"; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++fi ++echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 ++echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++else ++ # Is the header compilable? ++echo "$as_me:$LINENO: checking $ac_header usability" >&5 ++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++$ac_includes_default ++#include <$ac_header> ++_ACEOF ++rm -f conftest.$ac_objext ++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest.$ac_objext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_header_compiler=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ac_header_compiler=no ++fi ++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++# Is the header present? ++echo "$as_me:$LINENO: checking $ac_header presence" >&5 ++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include <$ac_header> ++_ACEOF ++if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 ++ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null; then ++ if test -s conftest.err; then ++ ac_cpp_err=$ac_c_preproc_warn_flag ++ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag ++ else ++ ac_cpp_err= ++ fi + else +- cat > conftest.$ac_ext < +-EOF +-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +-{ (eval echo configure:6019: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +-if test -z "$ac_err"; then +- rm -rf conftest* +- eval "ac_cv_header_$ac_safe=yes" ++ ac_cpp_err=yes ++fi ++if test -z "$ac_cpp_err"; then ++ ac_header_preproc=yes + else +- echo "$ac_err" >&5 +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_header_$ac_safe=no" ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_header_preproc=no ++fi ++rm -f conftest.err conftest.$ac_ext ++echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6 ++ ++# So? What about this header? ++case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in ++ yes:no: ) ++ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 ++echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 ++echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ++ ac_header_preproc=yes ++ ;; ++ no:yes:* ) ++ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 ++echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 ++echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 ++echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 ++echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 ++echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 ++echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ++ ( ++ cat <<\_ASBOX ++## ------------------------------------------ ## ++## Report this to the AC_PACKAGE_NAME lists. ## ++## ------------------------------------------ ## ++_ASBOX ++ ) | ++ sed "s/^/$as_me: WARNING: /" >&2 ++ ;; ++esac ++echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 ++if eval "test \"\${$as_ac_Header+set}\" = set"; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ eval "$as_ac_Header=\$ac_header_preproc" + fi +-rm -f conftest* ++echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 ++echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ + fi +-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` +- cat >> confdefs.h <&6 ++if test `eval echo '${'$as_ac_Header'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++_ACEOF ++ + fi ++ + done + + +-echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6 +-echo "configure:6047: checking whether time.h and sys/time.h may both be included" >&5 +-if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <&5 ++echo $ECHO_N "checking whether time.h and sys/time.h may both be included... $ECHO_C" >&6 ++if test "${ac_cv_header_time+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + #include + #include + #include +-int main() { +-struct tm *tp; +-; return 0; } +-EOF +-if { (eval echo configure:6061: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +- rm -rf conftest* ++ ++int ++main () ++{ ++if ((struct tm *) 0) ++return 0; ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest.$ac_objext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then + ac_cv_header_time=yes + else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- ac_cv_header_time=no ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ac_cv_header_time=no + fi +-rm -f conftest* ++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + fi +- +-echo "$ac_t""$ac_cv_header_time" 1>&6 ++echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5 ++echo "${ECHO_T}$ac_cv_header_time" >&6 + if test $ac_cv_header_time = yes; then +- cat >> confdefs.h <<\EOF ++ ++cat >>confdefs.h <<\_ACEOF + #define TIME_WITH_SYS_TIME 1 +-EOF ++_ACEOF + + fi + + +-if test $ac_cv_prog_gcc = yes; then +- echo $ac_n "checking whether ${CC-cc} needs -traditional""... $ac_c" 1>&6 +-echo "configure:6084: checking whether ${CC-cc} needs -traditional" >&5 +-if eval "test \"`echo '$''{'ac_cv_prog_gcc_traditional'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++if test $ac_cv_c_compiler_gnu = yes; then ++ echo "$as_me:$LINENO: checking whether $CC needs -traditional" >&5 ++echo $ECHO_N "checking whether $CC needs -traditional... $ECHO_C" >&6 ++if test "${ac_cv_prog_gcc_traditional+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_pattern="Autoconf.*'x'" +- cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + #include + Autoconf TIOCGETP +-EOF ++_ACEOF + if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- egrep "$ac_pattern" >/dev/null 2>&1; then +- rm -rf conftest* ++ $EGREP "$ac_pattern" >/dev/null 2>&1; then + ac_cv_prog_gcc_traditional=yes + else +- rm -rf conftest* + ac_cv_prog_gcc_traditional=no + fi + rm -f conftest* + + + if test $ac_cv_prog_gcc_traditional = no; then +- cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + #include + Autoconf TCGETA +-EOF ++_ACEOF + if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- egrep "$ac_pattern" >/dev/null 2>&1; then +- rm -rf conftest* ++ $EGREP "$ac_pattern" >/dev/null 2>&1; then + ac_cv_prog_gcc_traditional=yes + fi + rm -f conftest* + + fi + fi +- +-echo "$ac_t""$ac_cv_prog_gcc_traditional" 1>&6 ++echo "$as_me:$LINENO: result: $ac_cv_prog_gcc_traditional" >&5 ++echo "${ECHO_T}$ac_cv_prog_gcc_traditional" >&6 + if test $ac_cv_prog_gcc_traditional = yes; then + CC="$CC -traditional" + fi + fi +- +-echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 +-echo "configure:6130: checking return type of signal handlers" >&5 +-if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <&5 ++echo $ECHO_N "checking return type of signal handlers... $ECHO_C" >&6 ++if test "${ac_cv_type_signal+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + #include + #include + #ifdef signal +-#undef signal ++# undef signal + #endif + #ifdef __cplusplus + extern "C" void (*signal (int, void (*)(int)))(int); +@@ -6144,80 +20264,150 @@ + void (*signal ()) (); + #endif + +-int main() { ++int ++main () ++{ + int i; +-; return 0; } +-EOF +-if { (eval echo configure:6152: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +- rm -rf conftest* ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest.$ac_objext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then + ac_cv_type_signal=void + else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- ac_cv_type_signal=int ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ac_cv_type_signal=int + fi +-rm -f conftest* ++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + fi ++echo "$as_me:$LINENO: result: $ac_cv_type_signal" >&5 ++echo "${ECHO_T}$ac_cv_type_signal" >&6 + +-echo "$ac_t""$ac_cv_type_signal" 1>&6 +-cat >> confdefs.h <>confdefs.h <<_ACEOF + #define RETSIGTYPE $ac_cv_type_signal +-EOF ++_ACEOF ++ + + + for ac_func in select + do +-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 +-echo "configure:6173: checking for $ac_func" >&5 +-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 ++if eval "test \"\${$as_ac_var+set}\" = set"; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define $ac_func to an innocuous variant, in case declares $ac_func. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define $ac_func innocuous_$ac_func ++ + /* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char $ac_func(); below. */ +-#include +-/* Override any gcc2 internal prototype to avoid an error. */ +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char $ac_func(); ++ which can conflict with char $ac_func (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ + +-int main() { ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif + ++#undef $ac_func ++ ++/* Override any gcc2 internal prototype to avoid an error. */ ++#ifdef __cplusplus ++extern "C" ++{ ++#endif ++/* We use char because int might match the return type of a gcc2 ++ builtin and then its argument prototype would still apply. */ ++char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ + #if defined (__stub_$ac_func) || defined (__stub___$ac_func) + choke me + #else +-$ac_func(); ++char (*f) () = $ac_func; ++#endif ++#ifdef __cplusplus ++} + #endif + +-; return 0; } +-EOF +-if { (eval echo configure:6201: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +- rm -rf conftest* +- eval "ac_cv_func_$ac_func=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_func_$ac_func=no" +-fi +-rm -f conftest* +-fi ++int ++main () ++{ ++return f != $ac_func; ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest$ac_exeext' ++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ++ (eval $ac_try) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ eval "$as_ac_var=yes" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++eval "$as_ac_var=no" ++fi ++rm -f conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 ++echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 ++if test `eval echo '${'$as_ac_var'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 ++_ACEOF + +-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` +- cat >> confdefs.h <&6 + fi + done + +@@ -6225,295 +20415,1218 @@ + aclocaldir='${datadir}/aclocal' + + +-trap '' 1 2 15 +-cat > confcache <<\EOF ++ ac_config_files="$ac_config_files KXL.spec Makefile src/Makefile docs/Makefile" ++cat >confcache <<\_ACEOF + # This file is a shell script that caches the results of configure + # tests run on this system so they can be shared between configure +-# scripts and configure runs. It is not useful on other systems. +-# If it contains results you don't want to keep, you may remove or edit it. ++# scripts and configure runs, see configure's option --config-cache. ++# It is not useful on other systems. If it contains results you don't ++# want to keep, you may remove or edit it. + # +-# By default, configure uses ./config.cache as the cache file, +-# creating it if it does not exist already. You can give configure +-# the --cache-file=FILE option to use a different cache file; that is +-# what configure does when it calls configure scripts in +-# subdirectories, so they share the cache. +-# Giving --cache-file=/dev/null disables caching, for debugging configure. +-# config.status only pays attention to the cache file if you give it the +-# --recheck option to rerun configure. ++# config.status only pays attention to the cache file if you give it ++# the --recheck option to rerun configure. + # +-EOF ++# `ac_cv_env_foo' variables (set or unset) will be overridden when ++# loading this file, other *unset* `ac_cv_foo' will be assigned the ++# following values. ++ ++_ACEOF ++ + # The following way of writing the cache mishandles newlines in values, + # but we know of no workaround that is simple, portable, and efficient. + # So, don't put newlines in cache variables' values. + # Ultrix sh set writes to stderr and can't be redirected directly, + # and sets the high bit in the cache file unless we assign to the vars. +-(set) 2>&1 | +- case `(ac_space=' '; set | grep ac_space) 2>&1` in +- *ac_space=\ *) +- # `set' does not quote correctly, so add quotes (double-quote substitution +- # turns \\\\ into \\, and sed turns \\ into \). +- sed -n \ +- -e "s/'/'\\\\''/g" \ +- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" +- ;; +- *) +- # `set' quotes correctly as required by POSIX, so do not add quotes. +- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' +- ;; +- esac >> confcache +-if cmp -s $cache_file confcache; then +- : +-else ++{ ++ (set) 2>&1 | ++ case `(ac_space=' '; set | grep ac_space) 2>&1` in ++ *ac_space=\ *) ++ # `set' does not quote correctly, so add quotes (double-quote ++ # substitution turns \\\\ into \\, and sed turns \\ into \). ++ sed -n \ ++ "s/'/'\\\\''/g; ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ++ ;; ++ *) ++ # `set' quotes correctly as required by POSIX, so do not add quotes. ++ sed -n \ ++ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ++ ;; ++ esac; ++} | ++ sed ' ++ t clear ++ : clear ++ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ ++ t end ++ /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ ++ : end' >>confcache ++if diff $cache_file confcache >/dev/null 2>&1; then :; else + if test -w $cache_file; then +- echo "updating cache $cache_file" +- cat confcache > $cache_file ++ test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" ++ cat confcache >$cache_file + else + echo "not updating unwritable cache $cache_file" + fi + fi + rm -f confcache + +-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 +- + test "x$prefix" = xNONE && prefix=$ac_default_prefix + # Let make expand exec_prefix. + test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +-# Any assignment to VPATH causes Sun make to only execute +-# the first set of double-colon rules, so remove it if not needed. +-# If there is a colon in the path, we need to keep it. ++# VPATH may cause trouble with some makes, so we remove $(srcdir), ++# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and ++# trailing colons and then remove the whole line if VPATH becomes empty ++# (actually we leave an empty line to preserve line numbers). + if test "x$srcdir" = x.; then +- ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' ++ ac_vpsub='/^[ ]*VPATH[ ]*=/{ ++s/:*\$(srcdir):*/:/; ++s/:*\${srcdir}:*/:/; ++s/:*@srcdir@:*/:/; ++s/^\([^=]*=[ ]*\):*/\1/; ++s/:*$//; ++s/^[^=]*=[ ]*$//; ++}' + fi + +-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 +- + # Transform confdefs.h into DEFS. + # Protect against shell expansion while executing Makefile rules. + # Protect against Makefile macro expansion. +-cat > conftest.defs <<\EOF +-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g +-s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g +-s%\[%\\&%g +-s%\]%\\&%g +-s%\$%$$%g +-EOF +-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '` +-rm -f conftest.defs ++# ++# If the first sed substitution is executed (which looks for macros that ++# take arguments), then we branch to the quote section. Otherwise, ++# look for a macro that doesn't take arguments. ++cat >confdef2opt.sed <<\_ACEOF ++t clear ++: clear ++s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g ++t quote ++s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g ++t quote ++d ++: quote ++s,[ `~#$^&*(){}\\|;'"<>?],\\&,g ++s,\[,\\&,g ++s,\],\\&,g ++s,\$,$$,g ++p ++_ACEOF ++# We use echo to avoid assuming a particular line-breaking character. ++# The extra dot is to prevent the shell from consuming trailing ++# line-breaks from the sub-command output. A line-break within ++# single-quotes doesn't work because, if this script is created in a ++# platform that uses two characters for line-breaks (e.g., DOS), tr ++# would break. ++ac_LF_and_DOT=`echo; echo .` ++DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` ++rm -f confdef2opt.sed ++ ++ ++ac_libobjs= ++ac_ltlibobjs= ++for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue ++ # 1. Remove the extension, and $U if already installed. ++ ac_i=`echo "$ac_i" | ++ sed 's/\$U\././;s/\.o$//;s/\.obj$//'` ++ # 2. Add them. ++ ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" ++ ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' ++done ++LIBOBJS=$ac_libobjs + ++LTLIBOBJS=$ac_ltlibobjs + +-# Without the "./", some shells look in PATH for config.status. +-: ${CONFIG_STATUS=./config.status} + +-echo creating $CONFIG_STATUS +-rm -f $CONFIG_STATUS +-cat > $CONFIG_STATUS <&5 ++echo "$as_me: error: conditional \"AMDEP\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++: ${CONFIG_STATUS=./config.status} ++ac_clean_files_save=$ac_clean_files ++ac_clean_files="$ac_clean_files $CONFIG_STATUS" ++{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 ++echo "$as_me: creating $CONFIG_STATUS" >&6;} ++cat >$CONFIG_STATUS <<_ACEOF ++#! $SHELL ++# Generated by $as_me. + # Run this file to recreate the current configuration. +-# This directory was configured as follows, +-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +-# +-# $0 $ac_configure_args +-# + # Compiler output produced by configure, useful for debugging +-# configure, is in ./config.log if it exists. ++# configure, is in config.log if it exists. + +-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" +-for ac_option ++debug=false ++ac_cs_recheck=false ++ac_cs_silent=false ++SHELL=\${CONFIG_SHELL-$SHELL} ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF ++## --------------------- ## ++## M4sh Initialization. ## ++## --------------------- ## ++ ++# Be Bourne compatible ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then ++ set -o posix ++fi ++DUALCASE=1; export DUALCASE # for MKS sh ++ ++# Support unset when possible. ++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then ++ as_unset=unset ++else ++ as_unset=false ++fi ++ ++ ++# Work around bugs in pre-3.0 UWIN ksh. ++$as_unset ENV MAIL MAILPATH ++PS1='$ ' ++PS2='> ' ++PS4='+ ' ++ ++# NLS nuisances. ++for as_var in \ ++ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ ++ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ ++ LC_TELEPHONE LC_TIME ++do ++ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then ++ eval $as_var=C; export $as_var ++ else ++ $as_unset $as_var ++ fi ++done ++ ++# Required to use basename. ++if expr a : '\(a\)' >/dev/null 2>&1; then ++ as_expr=expr ++else ++ as_expr=false ++fi ++ ++if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then ++ as_basename=basename ++else ++ as_basename=false ++fi ++ ++ ++# Name of the executable. ++as_me=`$as_basename "$0" || ++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ ++ X"$0" : 'X\(//\)$' \| \ ++ X"$0" : 'X\(/\)$' \| \ ++ . : '\(.\)' 2>/dev/null || ++echo X/"$0" | ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } ++ /^X\/\(\/\/\)$/{ s//\1/; q; } ++ /^X\/\(\/\).*/{ s//\1/; q; } ++ s/.*/./; q'` ++ ++ ++# PATH needs CR, and LINENO needs CR and PATH. ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits ++ ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ echo "#! /bin/sh" >conf$$.sh ++ echo "exit 0" >>conf$$.sh ++ chmod +x conf$$.sh ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then ++ PATH_SEPARATOR=';' ++ else ++ PATH_SEPARATOR=: ++ fi ++ rm -f conf$$.sh ++fi ++ ++ ++ as_lineno_1=$LINENO ++ as_lineno_2=$LINENO ++ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` ++ test "x$as_lineno_1" != "x$as_lineno_2" && ++ test "x$as_lineno_3" = "x$as_lineno_2" || { ++ # Find who we are. Look in the path if we contain no path at all ++ # relative or not. ++ case $0 in ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++done ++ ++ ;; ++ esac ++ # We did not find ourselves, most probably we were run as `sh COMMAND' ++ # in which case we are not to be found in the path. ++ if test "x$as_myself" = x; then ++ as_myself=$0 ++ fi ++ if test ! -f "$as_myself"; then ++ { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 ++echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} ++ { (exit 1); exit 1; }; } ++ fi ++ case $CONFIG_SHELL in ++ '') ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for as_base in sh bash ksh sh5; do ++ case $as_dir in ++ /*) ++ if ("$as_dir/$as_base" -c ' ++ as_lineno_1=$LINENO ++ as_lineno_2=$LINENO ++ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` ++ test "x$as_lineno_1" != "x$as_lineno_2" && ++ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then ++ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } ++ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } ++ CONFIG_SHELL=$as_dir/$as_base ++ export CONFIG_SHELL ++ exec "$CONFIG_SHELL" "$0" ${1+"$@"} ++ fi;; ++ esac ++ done ++done ++;; ++ esac ++ ++ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO ++ # uniformly replaced by the line number. The first 'sed' inserts a ++ # line-number line before each line; the second 'sed' does the real ++ # work. The second script uses 'N' to pair each line-number line ++ # with the numbered line, and appends trailing '-' during ++ # substitution so that $LINENO is not a special case at line end. ++ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the ++ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) ++ sed '=' <$as_myself | ++ sed ' ++ N ++ s,$,-, ++ : loop ++ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, ++ t loop ++ s,-$,, ++ s,^['$as_cr_digits']*\n,, ++ ' >$as_me.lineno && ++ chmod +x $as_me.lineno || ++ { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 ++echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} ++ { (exit 1); exit 1; }; } ++ ++ # Don't try to exec as it changes $[0], causing all sort of problems ++ # (the dirname of $[0] is not the place where we might find the ++ # original and so on. Autoconf is especially sensible to this). ++ . ./$as_me.lineno ++ # Exit status is that of the last command. ++ exit ++} ++ ++ ++case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in ++ *c*,-n*) ECHO_N= ECHO_C=' ++' ECHO_T=' ' ;; ++ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; ++ *) ECHO_N= ECHO_C='\c' ECHO_T= ;; ++esac ++ ++if expr a : '\(a\)' >/dev/null 2>&1; then ++ as_expr=expr ++else ++ as_expr=false ++fi ++ ++rm -f conf$$ conf$$.exe conf$$.file ++echo >conf$$.file ++if ln -s conf$$.file conf$$ 2>/dev/null; then ++ # We could just check for DJGPP; but this test a) works b) is more generic ++ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). ++ if test -f conf$$.exe; then ++ # Don't use ln at all; we don't have any links ++ as_ln_s='cp -p' ++ else ++ as_ln_s='ln -s' ++ fi ++elif ln conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s=ln ++else ++ as_ln_s='cp -p' ++fi ++rm -f conf$$ conf$$.exe conf$$.file ++ ++if mkdir -p . 2>/dev/null; then ++ as_mkdir_p=: ++else ++ test -d ./-p && rmdir ./-p ++ as_mkdir_p=false ++fi ++ ++as_executable_p="test -f" ++ ++# Sed expression to map a string onto a valid CPP name. ++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" ++ ++# Sed expression to map a string onto a valid variable name. ++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" ++ ++ ++# IFS ++# We need space, tab and new line, in precisely that order. ++as_nl=' ++' ++IFS=" $as_nl" ++ ++# CDPATH. ++$as_unset CDPATH ++ ++exec 6>&1 ++ ++# Open the log real soon, to keep \$[0] and so on meaningful, and to ++# report actual input values of CONFIG_FILES etc. instead of their ++# values after options handling. Logging --version etc. is OK. ++exec 5>>config.log ++{ ++ echo ++ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ++## Running $as_me. ## ++_ASBOX ++} >&5 ++cat >&5 <<_CSEOF ++ ++This file was extended by $as_me, which was ++generated by GNU Autoconf 2.59. Invocation command line was ++ ++ CONFIG_FILES = $CONFIG_FILES ++ CONFIG_HEADERS = $CONFIG_HEADERS ++ CONFIG_LINKS = $CONFIG_LINKS ++ CONFIG_COMMANDS = $CONFIG_COMMANDS ++ $ $0 $@ ++ ++_CSEOF ++echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 ++echo >&5 ++_ACEOF ++ ++# Files that config.status was made for. ++if test -n "$ac_config_files"; then ++ echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS ++fi ++ ++if test -n "$ac_config_headers"; then ++ echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS ++fi ++ ++if test -n "$ac_config_links"; then ++ echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS ++fi ++ ++if test -n "$ac_config_commands"; then ++ echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS ++fi ++ ++cat >>$CONFIG_STATUS <<\_ACEOF ++ ++ac_cs_usage="\ ++\`$as_me' instantiates files from templates according to the ++current configuration. ++ ++Usage: $0 [OPTIONS] [FILE]... ++ ++ -h, --help print this help, then exit ++ -V, --version print version number, then exit ++ -q, --quiet do not print progress messages ++ -d, --debug don't remove temporary files ++ --recheck update $as_me by reconfiguring in the same conditions ++ --file=FILE[:TEMPLATE] ++ instantiate the configuration file FILE ++ ++Configuration files: ++$config_files ++ ++Configuration commands: ++$config_commands ++ ++Report bugs to ." ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<_ACEOF ++ac_cs_version="\\ ++config.status ++configured by $0, generated by GNU Autoconf 2.59, ++ with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" ++ ++Copyright (C) 2003 Free Software Foundation, Inc. ++This config.status script is free software; the Free Software Foundation ++gives unlimited permission to copy, distribute and modify it." ++srcdir=$srcdir ++INSTALL="$INSTALL" ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF ++# If no file are specified by the user, then we need to provide default ++# value. By we need to know if files were specified by the user. ++ac_need_defaults=: ++while test $# != 0 + do +- case "\$ac_option" in ++ case $1 in ++ --*=*) ++ ac_option=`expr "x$1" : 'x\([^=]*\)='` ++ ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` ++ ac_shift=: ++ ;; ++ -*) ++ ac_option=$1 ++ ac_optarg=$2 ++ ac_shift=shift ++ ;; ++ *) # This is not an option, so the user has probably given explicit ++ # arguments. ++ ac_option=$1 ++ ac_need_defaults=false;; ++ esac ++ ++ case $ac_option in ++ # Handling of the options. ++_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) +- echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" +- exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; +- -version | --version | --versio | --versi | --vers | --ver | --ve | --v) +- echo "$CONFIG_STATUS generated by autoconf version 2.13" +- exit 0 ;; +- -help | --help | --hel | --he | --h) +- echo "\$ac_cs_usage"; exit 0 ;; +- *) echo "\$ac_cs_usage"; exit 1 ;; ++ ac_cs_recheck=: ;; ++ --version | --vers* | -V ) ++ echo "$ac_cs_version"; exit 0 ;; ++ --he | --h) ++ # Conflict between --help and --header ++ { { echo "$as_me:$LINENO: error: ambiguous option: $1 ++Try \`$0 --help' for more information." >&5 ++echo "$as_me: error: ambiguous option: $1 ++Try \`$0 --help' for more information." >&2;} ++ { (exit 1); exit 1; }; };; ++ --help | --hel | -h ) ++ echo "$ac_cs_usage"; exit 0 ;; ++ --debug | --d* | -d ) ++ debug=: ;; ++ --file | --fil | --fi | --f ) ++ $ac_shift ++ CONFIG_FILES="$CONFIG_FILES $ac_optarg" ++ ac_need_defaults=false;; ++ --header | --heade | --head | --hea ) ++ $ac_shift ++ CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" ++ ac_need_defaults=false;; ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ++ | -silent | --silent | --silen | --sile | --sil | --si | --s) ++ ac_cs_silent=: ;; ++ ++ # This is an error. ++ -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 ++Try \`$0 --help' for more information." >&5 ++echo "$as_me: error: unrecognized option: $1 ++Try \`$0 --help' for more information." >&2;} ++ { (exit 1); exit 1; }; } ;; ++ ++ *) ac_config_targets="$ac_config_targets $1" ;; ++ + esac ++ shift + done + +-ac_given_srcdir=$srcdir +-ac_given_INSTALL="$INSTALL" ++ac_configure_extra_args= + +-trap 'rm -fr `echo "KXL.spec Makefile src/Makefile docs/Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 +-EOF +-cat >> $CONFIG_STATUS </dev/null ++ ac_configure_extra_args="$ac_configure_extra_args --silent" ++fi + +-# Protect against being on the right side of a sed subst in config.status. +-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g; +- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF +-$ac_vpsub +-$extrasub +-s%@SHELL@%$SHELL%g +-s%@CFLAGS@%$CFLAGS%g +-s%@CPPFLAGS@%$CPPFLAGS%g +-s%@CXXFLAGS@%$CXXFLAGS%g +-s%@FFLAGS@%$FFLAGS%g +-s%@DEFS@%$DEFS%g +-s%@LDFLAGS@%$LDFLAGS%g +-s%@LIBS@%$LIBS%g +-s%@exec_prefix@%$exec_prefix%g +-s%@prefix@%$prefix%g +-s%@program_transform_name@%$program_transform_name%g +-s%@bindir@%$bindir%g +-s%@sbindir@%$sbindir%g +-s%@libexecdir@%$libexecdir%g +-s%@datadir@%$datadir%g +-s%@sysconfdir@%$sysconfdir%g +-s%@sharedstatedir@%$sharedstatedir%g +-s%@localstatedir@%$localstatedir%g +-s%@libdir@%$libdir%g +-s%@includedir@%$includedir%g +-s%@oldincludedir@%$oldincludedir%g +-s%@infodir@%$infodir%g +-s%@mandir@%$mandir%g +-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g +-s%@INSTALL_DATA@%$INSTALL_DATA%g +-s%@PACKAGE@%$PACKAGE%g +-s%@VERSION@%$VERSION%g +-s%@ACLOCAL@%$ACLOCAL%g +-s%@AUTOCONF@%$AUTOCONF%g +-s%@AUTOMAKE@%$AUTOMAKE%g +-s%@AUTOHEADER@%$AUTOHEADER%g +-s%@MAKEINFO@%$MAKEINFO%g +-s%@SET_MAKE@%$SET_MAKE%g +-s%@CC@%$CC%g +-s%@host@%$host%g +-s%@host_alias@%$host_alias%g +-s%@host_cpu@%$host_cpu%g +-s%@host_vendor@%$host_vendor%g +-s%@host_os@%$host_os%g +-s%@build@%$build%g +-s%@build_alias@%$build_alias%g +-s%@build_cpu@%$build_cpu%g +-s%@build_vendor@%$build_vendor%g +-s%@build_os@%$build_os%g +-s%@LN_S@%$LN_S%g +-s%@OBJEXT@%$OBJEXT%g +-s%@EXEEXT@%$EXEEXT%g +-s%@ECHO@%$ECHO%g +-s%@RANLIB@%$RANLIB%g +-s%@STRIP@%$STRIP%g +-s%@CPP@%$CPP%g +-s%@LIBTOOL@%$LIBTOOL%g +-s%@X_CFLAGS@%$X_CFLAGS%g +-s%@X_PRE_LIBS@%$X_PRE_LIBS%g +-s%@X_LIBS@%$X_LIBS%g +-s%@X_EXTRA_LIBS@%$X_EXTRA_LIBS%g +-s%@aclocaldir@%$aclocaldir%g ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF ++if \$ac_cs_recheck; then ++ echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 ++ exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion ++fi ++ ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<_ACEOF ++# ++# INIT-COMMANDS section. ++# ++ ++AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" ++ ++_ACEOF ++ ++ ++ ++cat >>$CONFIG_STATUS <<\_ACEOF ++for ac_config_target in $ac_config_targets ++do ++ case "$ac_config_target" in ++ # Handling of arguments. ++ "KXL.spec" ) CONFIG_FILES="$CONFIG_FILES KXL.spec" ;; ++ "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; ++ "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; ++ "docs/Makefile" ) CONFIG_FILES="$CONFIG_FILES docs/Makefile" ;; ++ "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; ++ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 ++echo "$as_me: error: invalid argument: $ac_config_target" >&2;} ++ { (exit 1); exit 1; }; };; ++ esac ++done ++ ++# If the user did not use the arguments to specify the items to instantiate, ++# then the envvar interface is used. Set only those that are not. ++# We use the long form for the default assignment because of an extremely ++# bizarre bug on SunOS 4.1.3. ++if $ac_need_defaults; then ++ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files ++ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands ++fi ++ ++# Have a temporary directory for convenience. Make it in the build tree ++# simply because there is no reason to put it here, and in addition, ++# creating and moving files from /tmp can sometimes cause problems. ++# Create a temporary directory, and hook for its removal unless debugging. ++$debug || ++{ ++ trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 ++ trap '{ (exit 1); exit 1; }' 1 2 13 15 ++} ++ ++# Create a (secure) tmp directory for tmp files. ++ ++{ ++ tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && ++ test -n "$tmp" && test -d "$tmp" ++} || ++{ ++ tmp=./confstat$$-$RANDOM ++ (umask 077 && mkdir $tmp) ++} || ++{ ++ echo "$me: cannot create a temporary directory in ." >&2 ++ { (exit 1); exit 1; } ++} ++ ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<_ACEOF + ++# ++# CONFIG_FILES section. ++# ++ ++# No need to generate the scripts if there are no CONFIG_FILES. ++# This happens for instance when ./config.status config.h ++if test -n "\$CONFIG_FILES"; then ++ # Protect against being on the right side of a sed subst in config.status. ++ sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; ++ s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF ++s,@SHELL@,$SHELL,;t t ++s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t ++s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t ++s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t ++s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t ++s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t ++s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t ++s,@exec_prefix@,$exec_prefix,;t t ++s,@prefix@,$prefix,;t t ++s,@program_transform_name@,$program_transform_name,;t t ++s,@bindir@,$bindir,;t t ++s,@sbindir@,$sbindir,;t t ++s,@libexecdir@,$libexecdir,;t t ++s,@datadir@,$datadir,;t t ++s,@sysconfdir@,$sysconfdir,;t t ++s,@sharedstatedir@,$sharedstatedir,;t t ++s,@localstatedir@,$localstatedir,;t t ++s,@libdir@,$libdir,;t t ++s,@includedir@,$includedir,;t t ++s,@oldincludedir@,$oldincludedir,;t t ++s,@infodir@,$infodir,;t t ++s,@mandir@,$mandir,;t t ++s,@build_alias@,$build_alias,;t t ++s,@host_alias@,$host_alias,;t t ++s,@target_alias@,$target_alias,;t t ++s,@DEFS@,$DEFS,;t t ++s,@ECHO_C@,$ECHO_C,;t t ++s,@ECHO_N@,$ECHO_N,;t t ++s,@ECHO_T@,$ECHO_T,;t t ++s,@LIBS@,$LIBS,;t t ++s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t ++s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t ++s,@INSTALL_DATA@,$INSTALL_DATA,;t t ++s,@CYGPATH_W@,$CYGPATH_W,;t t ++s,@PACKAGE@,$PACKAGE,;t t ++s,@VERSION@,$VERSION,;t t ++s,@ACLOCAL@,$ACLOCAL,;t t ++s,@AUTOCONF@,$AUTOCONF,;t t ++s,@AUTOMAKE@,$AUTOMAKE,;t t ++s,@AUTOHEADER@,$AUTOHEADER,;t t ++s,@MAKEINFO@,$MAKEINFO,;t t ++s,@install_sh@,$install_sh,;t t ++s,@STRIP@,$STRIP,;t t ++s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t ++s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t ++s,@mkdir_p@,$mkdir_p,;t t ++s,@AWK@,$AWK,;t t ++s,@SET_MAKE@,$SET_MAKE,;t t ++s,@am__leading_dot@,$am__leading_dot,;t t ++s,@AMTAR@,$AMTAR,;t t ++s,@am__tar@,$am__tar,;t t ++s,@am__untar@,$am__untar,;t t ++s,@CC@,$CC,;t t ++s,@CFLAGS@,$CFLAGS,;t t ++s,@LDFLAGS@,$LDFLAGS,;t t ++s,@CPPFLAGS@,$CPPFLAGS,;t t ++s,@ac_ct_CC@,$ac_ct_CC,;t t ++s,@EXEEXT@,$EXEEXT,;t t ++s,@OBJEXT@,$OBJEXT,;t t ++s,@DEPDIR@,$DEPDIR,;t t ++s,@am__include@,$am__include,;t t ++s,@am__quote@,$am__quote,;t t ++s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t ++s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t ++s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t ++s,@CCDEPMODE@,$CCDEPMODE,;t t ++s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t ++s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t ++s,@build@,$build,;t t ++s,@build_cpu@,$build_cpu,;t t ++s,@build_vendor@,$build_vendor,;t t ++s,@build_os@,$build_os,;t t ++s,@host@,$host,;t t ++s,@host_cpu@,$host_cpu,;t t ++s,@host_vendor@,$host_vendor,;t t ++s,@host_os@,$host_os,;t t ++s,@EGREP@,$EGREP,;t t ++s,@LN_S@,$LN_S,;t t ++s,@ECHO@,$ECHO,;t t ++s,@AR@,$AR,;t t ++s,@ac_ct_AR@,$ac_ct_AR,;t t ++s,@RANLIB@,$RANLIB,;t t ++s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t ++s,@CPP@,$CPP,;t t ++s,@CXX@,$CXX,;t t ++s,@CXXFLAGS@,$CXXFLAGS,;t t ++s,@ac_ct_CXX@,$ac_ct_CXX,;t t ++s,@CXXDEPMODE@,$CXXDEPMODE,;t t ++s,@am__fastdepCXX_TRUE@,$am__fastdepCXX_TRUE,;t t ++s,@am__fastdepCXX_FALSE@,$am__fastdepCXX_FALSE,;t t ++s,@CXXCPP@,$CXXCPP,;t t ++s,@F77@,$F77,;t t ++s,@FFLAGS@,$FFLAGS,;t t ++s,@ac_ct_F77@,$ac_ct_F77,;t t ++s,@LIBTOOL@,$LIBTOOL,;t t ++s,@X_CFLAGS@,$X_CFLAGS,;t t ++s,@X_PRE_LIBS@,$X_PRE_LIBS,;t t ++s,@X_LIBS@,$X_LIBS,;t t ++s,@X_EXTRA_LIBS@,$X_EXTRA_LIBS,;t t ++s,@aclocaldir@,$aclocaldir,;t t ++s,@LIBOBJS@,$LIBOBJS,;t t ++s,@LTLIBOBJS@,$LTLIBOBJS,;t t + CEOF +-EOF + +-cat >> $CONFIG_STATUS <<\EOF ++_ACEOF + +-# Split the substitutions into bite-sized pieces for seds with +-# small command number limits, like on Digital OSF/1 and HP-UX. +-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. +-ac_file=1 # Number of current file. +-ac_beg=1 # First line for current file. +-ac_end=$ac_max_sed_cmds # Line after last line for current file. +-ac_more_lines=: +-ac_sed_cmds="" +-while $ac_more_lines; do +- if test $ac_beg -gt 1; then +- sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file +- else +- sed "${ac_end}q" conftest.subs > conftest.s$ac_file +- fi +- if test ! -s conftest.s$ac_file; then +- ac_more_lines=false +- rm -f conftest.s$ac_file +- else +- if test -z "$ac_sed_cmds"; then +- ac_sed_cmds="sed -f conftest.s$ac_file" ++ cat >>$CONFIG_STATUS <<\_ACEOF ++ # Split the substitutions into bite-sized pieces for seds with ++ # small command number limits, like on Digital OSF/1 and HP-UX. ++ ac_max_sed_lines=48 ++ ac_sed_frag=1 # Number of current file. ++ ac_beg=1 # First line for current file. ++ ac_end=$ac_max_sed_lines # Line after last line for current file. ++ ac_more_lines=: ++ ac_sed_cmds= ++ while $ac_more_lines; do ++ if test $ac_beg -gt 1; then ++ sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag ++ else ++ sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag ++ fi ++ if test ! -s $tmp/subs.frag; then ++ ac_more_lines=false + else +- ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" ++ # The purpose of the label and of the branching condition is to ++ # speed up the sed processing (if there are no `@' at all, there ++ # is no need to browse any of the substitutions). ++ # These are the two extra sed commands mentioned above. ++ (echo ':t ++ /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed ++ if test -z "$ac_sed_cmds"; then ++ ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" ++ else ++ ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" ++ fi ++ ac_sed_frag=`expr $ac_sed_frag + 1` ++ ac_beg=$ac_end ++ ac_end=`expr $ac_end + $ac_max_sed_lines` + fi +- ac_file=`expr $ac_file + 1` +- ac_beg=$ac_end +- ac_end=`expr $ac_end + $ac_max_sed_cmds` ++ done ++ if test -z "$ac_sed_cmds"; then ++ ac_sed_cmds=cat + fi +-done +-if test -z "$ac_sed_cmds"; then +- ac_sed_cmds=cat +-fi +-EOF +- +-cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF +-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then ++_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF ++for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". +- case "$ac_file" in +- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` +- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; +- *) ac_file_in="${ac_file}.in" ;; +- esac +- +- # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. +- +- # Remove last slash and all that follows it. Not all systems have dirname. +- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` +- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then +- # The file is in a subdirectory. +- test ! -d "$ac_dir" && mkdir "$ac_dir" +- ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" +- # A "../" for each directory in $ac_dir_suffix. +- ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` +- else +- ac_dir_suffix= ac_dots= +- fi +- +- case "$ac_given_srcdir" in +- .) srcdir=. +- if test -z "$ac_dots"; then top_srcdir=. +- else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; +- /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; ++ case $ac_file in ++ - | *:- | *:-:* ) # input from stdin ++ cat >$tmp/stdin ++ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ++ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; ++ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ++ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; ++ * ) ac_file_in=$ac_file.in ;; ++ esac ++ ++ # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. ++ ac_dir=`(dirname "$ac_file") 2>/dev/null || ++$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$ac_file" : 'X\(//\)[^/]' \| \ ++ X"$ac_file" : 'X\(//\)$' \| \ ++ X"$ac_file" : 'X\(/\)' \| \ ++ . : '\(.\)' 2>/dev/null || ++echo X"$ac_file" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } ++ /^X\(\/\/\)[^/].*/{ s//\1/; q; } ++ /^X\(\/\/\)$/{ s//\1/; q; } ++ /^X\(\/\).*/{ s//\1/; q; } ++ s/.*/./; q'` ++ { if $as_mkdir_p; then ++ mkdir -p "$ac_dir" ++ else ++ as_dir="$ac_dir" ++ as_dirs= ++ while test ! -d "$as_dir"; do ++ as_dirs="$as_dir $as_dirs" ++ as_dir=`(dirname "$as_dir") 2>/dev/null || ++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$as_dir" : 'X\(//\)[^/]' \| \ ++ X"$as_dir" : 'X\(//\)$' \| \ ++ X"$as_dir" : 'X\(/\)' \| \ ++ . : '\(.\)' 2>/dev/null || ++echo X"$as_dir" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } ++ /^X\(\/\/\)[^/].*/{ s//\1/; q; } ++ /^X\(\/\/\)$/{ s//\1/; q; } ++ /^X\(\/\).*/{ s//\1/; q; } ++ s/.*/./; q'` ++ done ++ test ! -n "$as_dirs" || mkdir $as_dirs ++ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 ++echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} ++ { (exit 1); exit 1; }; }; } ++ ++ ac_builddir=. ++ ++if test "$ac_dir" != .; then ++ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` ++ # A "../" for each directory in $ac_dir_suffix. ++ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` ++else ++ ac_dir_suffix= ac_top_builddir= ++fi ++ ++case $srcdir in ++ .) # No --srcdir option. We are building in place. ++ ac_srcdir=. ++ if test -z "$ac_top_builddir"; then ++ ac_top_srcdir=. ++ else ++ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` ++ fi ;; ++ [\\/]* | ?:[\\/]* ) # Absolute path. ++ ac_srcdir=$srcdir$ac_dir_suffix; ++ ac_top_srcdir=$srcdir ;; + *) # Relative path. +- srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" +- top_srcdir="$ac_dots$ac_given_srcdir" ;; ++ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_builddir$srcdir ;; ++esac ++ ++# Do not use `cd foo && pwd` to compute absolute paths, because ++# the directories may not exist. ++case `pwd` in ++.) ac_abs_builddir="$ac_dir";; ++*) ++ case "$ac_dir" in ++ .) ac_abs_builddir=`pwd`;; ++ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; ++ *) ac_abs_builddir=`pwd`/"$ac_dir";; ++ esac;; ++esac ++case $ac_abs_builddir in ++.) ac_abs_top_builddir=${ac_top_builddir}.;; ++*) ++ case ${ac_top_builddir}. in ++ .) ac_abs_top_builddir=$ac_abs_builddir;; ++ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; ++ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; ++ esac;; ++esac ++case $ac_abs_builddir in ++.) ac_abs_srcdir=$ac_srcdir;; ++*) ++ case $ac_srcdir in ++ .) ac_abs_srcdir=$ac_abs_builddir;; ++ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; ++ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; ++ esac;; ++esac ++case $ac_abs_builddir in ++.) ac_abs_top_srcdir=$ac_top_srcdir;; ++*) ++ case $ac_top_srcdir in ++ .) ac_abs_top_srcdir=$ac_abs_builddir;; ++ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; ++ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; ++ esac;; ++esac ++ ++ ++ case $INSTALL in ++ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; ++ *) ac_INSTALL=$ac_top_builddir$INSTALL ;; + esac + +- case "$ac_given_INSTALL" in +- [/$]*) INSTALL="$ac_given_INSTALL" ;; +- *) INSTALL="$ac_dots$ac_given_INSTALL" ;; +- esac +- +- echo creating "$ac_file" +- rm -f "$ac_file" +- configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." +- case "$ac_file" in +- *Makefile*) ac_comsub="1i\\ +-# $configure_input" ;; +- *) ac_comsub= ;; +- esac +- +- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` +- sed -e "$ac_comsub +-s%@configure_input@%$configure_input%g +-s%@srcdir@%$srcdir%g +-s%@top_srcdir@%$top_srcdir%g +-s%@INSTALL@%$INSTALL%g +-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file +-fi; done +-rm -f conftest.s* ++ # Let's still pretend it is `configure' which instantiates (i.e., don't ++ # use $as_me), people would be surprised to read: ++ # /* config.h. Generated by config.status. */ ++ if test x"$ac_file" = x-; then ++ configure_input= ++ else ++ configure_input="$ac_file. " ++ fi ++ configure_input=$configure_input"Generated from `echo $ac_file_in | ++ sed 's,.*/,,'` by configure." + +-EOF +-cat >> $CONFIG_STATUS <&5 ++echo "$as_me: error: cannot find input file: $f" >&2;} ++ { (exit 1); exit 1; }; } ++ echo "$f";; ++ *) # Relative ++ if test -f "$f"; then ++ # Build tree ++ echo "$f" ++ elif test -f "$srcdir/$f"; then ++ # Source tree ++ echo "$srcdir/$f" ++ else ++ # /dev/null tree ++ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 ++echo "$as_me: error: cannot find input file: $f" >&2;} ++ { (exit 1); exit 1; }; } ++ fi;; ++ esac ++ done` || { (exit 1); exit 1; } + +-EOF +-cat >> $CONFIG_STATUS <<\EOF ++ if test x"$ac_file" != x-; then ++ { echo "$as_me:$LINENO: creating $ac_file" >&5 ++echo "$as_me: creating $ac_file" >&6;} ++ rm -f "$ac_file" ++ fi ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF ++ sed "$ac_vpsub ++$extrasub ++_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF ++:t ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b ++s,@configure_input@,$configure_input,;t t ++s,@srcdir@,$ac_srcdir,;t t ++s,@abs_srcdir@,$ac_abs_srcdir,;t t ++s,@top_srcdir@,$ac_top_srcdir,;t t ++s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t ++s,@builddir@,$ac_builddir,;t t ++s,@abs_builddir@,$ac_abs_builddir,;t t ++s,@top_builddir@,$ac_top_builddir,;t t ++s,@abs_top_builddir@,$ac_abs_top_builddir,;t t ++s,@INSTALL@,$ac_INSTALL,;t t ++" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out ++ rm -f $tmp/stdin ++ if test x"$ac_file" != x-; then ++ mv $tmp/out $ac_file ++ else ++ cat $tmp/out ++ rm -f $tmp/out ++ fi + +-exit 0 +-EOF ++done ++_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF ++ ++# ++# CONFIG_COMMANDS section. ++# ++for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue ++ ac_dest=`echo "$ac_file" | sed 's,:.*,,'` ++ ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` ++ ac_dir=`(dirname "$ac_dest") 2>/dev/null || ++$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$ac_dest" : 'X\(//\)[^/]' \| \ ++ X"$ac_dest" : 'X\(//\)$' \| \ ++ X"$ac_dest" : 'X\(/\)' \| \ ++ . : '\(.\)' 2>/dev/null || ++echo X"$ac_dest" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } ++ /^X\(\/\/\)[^/].*/{ s//\1/; q; } ++ /^X\(\/\/\)$/{ s//\1/; q; } ++ /^X\(\/\).*/{ s//\1/; q; } ++ s/.*/./; q'` ++ { if $as_mkdir_p; then ++ mkdir -p "$ac_dir" ++ else ++ as_dir="$ac_dir" ++ as_dirs= ++ while test ! -d "$as_dir"; do ++ as_dirs="$as_dir $as_dirs" ++ as_dir=`(dirname "$as_dir") 2>/dev/null || ++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$as_dir" : 'X\(//\)[^/]' \| \ ++ X"$as_dir" : 'X\(//\)$' \| \ ++ X"$as_dir" : 'X\(/\)' \| \ ++ . : '\(.\)' 2>/dev/null || ++echo X"$as_dir" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } ++ /^X\(\/\/\)[^/].*/{ s//\1/; q; } ++ /^X\(\/\/\)$/{ s//\1/; q; } ++ /^X\(\/\).*/{ s//\1/; q; } ++ s/.*/./; q'` ++ done ++ test ! -n "$as_dirs" || mkdir $as_dirs ++ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 ++echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} ++ { (exit 1); exit 1; }; }; } ++ ++ ac_builddir=. ++ ++if test "$ac_dir" != .; then ++ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` ++ # A "../" for each directory in $ac_dir_suffix. ++ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` ++else ++ ac_dir_suffix= ac_top_builddir= ++fi ++ ++case $srcdir in ++ .) # No --srcdir option. We are building in place. ++ ac_srcdir=. ++ if test -z "$ac_top_builddir"; then ++ ac_top_srcdir=. ++ else ++ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` ++ fi ;; ++ [\\/]* | ?:[\\/]* ) # Absolute path. ++ ac_srcdir=$srcdir$ac_dir_suffix; ++ ac_top_srcdir=$srcdir ;; ++ *) # Relative path. ++ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_builddir$srcdir ;; ++esac ++ ++# Do not use `cd foo && pwd` to compute absolute paths, because ++# the directories may not exist. ++case `pwd` in ++.) ac_abs_builddir="$ac_dir";; ++*) ++ case "$ac_dir" in ++ .) ac_abs_builddir=`pwd`;; ++ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; ++ *) ac_abs_builddir=`pwd`/"$ac_dir";; ++ esac;; ++esac ++case $ac_abs_builddir in ++.) ac_abs_top_builddir=${ac_top_builddir}.;; ++*) ++ case ${ac_top_builddir}. in ++ .) ac_abs_top_builddir=$ac_abs_builddir;; ++ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; ++ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; ++ esac;; ++esac ++case $ac_abs_builddir in ++.) ac_abs_srcdir=$ac_srcdir;; ++*) ++ case $ac_srcdir in ++ .) ac_abs_srcdir=$ac_abs_builddir;; ++ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; ++ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; ++ esac;; ++esac ++case $ac_abs_builddir in ++.) ac_abs_top_srcdir=$ac_top_srcdir;; ++*) ++ case $ac_top_srcdir in ++ .) ac_abs_top_srcdir=$ac_abs_builddir;; ++ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; ++ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; ++ esac;; ++esac ++ ++ ++ { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 ++echo "$as_me: executing $ac_dest commands" >&6;} ++ case $ac_dest in ++ depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do ++ # Strip MF so we end up with the name of the file. ++ mf=`echo "$mf" | sed -e 's/:.*$//'` ++ # Check whether this is an Automake generated Makefile or not. ++ # We used to match only the files named `Makefile.in', but ++ # some people rename them; so instead we look at the file content. ++ # Grep'ing the first line is not enough: some people post-process ++ # each Makefile.in and add a new line on top of each file to say so. ++ # So let's grep whole file. ++ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then ++ dirpart=`(dirname "$mf") 2>/dev/null || ++$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$mf" : 'X\(//\)[^/]' \| \ ++ X"$mf" : 'X\(//\)$' \| \ ++ X"$mf" : 'X\(/\)' \| \ ++ . : '\(.\)' 2>/dev/null || ++echo X"$mf" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } ++ /^X\(\/\/\)[^/].*/{ s//\1/; q; } ++ /^X\(\/\/\)$/{ s//\1/; q; } ++ /^X\(\/\).*/{ s//\1/; q; } ++ s/.*/./; q'` ++ else ++ continue ++ fi ++ # Extract the definition of DEPDIR, am__include, and am__quote ++ # from the Makefile without running `make'. ++ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` ++ test -z "$DEPDIR" && continue ++ am__include=`sed -n 's/^am__include = //p' < "$mf"` ++ test -z "am__include" && continue ++ am__quote=`sed -n 's/^am__quote = //p' < "$mf"` ++ # When using ansi2knr, U may be empty or an underscore; expand it ++ U=`sed -n 's/^U = //p' < "$mf"` ++ # Find all dependency output files, they are included files with ++ # $(DEPDIR) in their names. We invoke sed twice because it is the ++ # simplest approach to changing $(DEPDIR) to its actual value in the ++ # expansion. ++ for file in `sed -n " ++ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ ++ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do ++ # Make sure the directory exists. ++ test -f "$dirpart/$file" && continue ++ fdir=`(dirname "$file") 2>/dev/null || ++$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$file" : 'X\(//\)[^/]' \| \ ++ X"$file" : 'X\(//\)$' \| \ ++ X"$file" : 'X\(/\)' \| \ ++ . : '\(.\)' 2>/dev/null || ++echo X"$file" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } ++ /^X\(\/\/\)[^/].*/{ s//\1/; q; } ++ /^X\(\/\/\)$/{ s//\1/; q; } ++ /^X\(\/\).*/{ s//\1/; q; } ++ s/.*/./; q'` ++ { if $as_mkdir_p; then ++ mkdir -p $dirpart/$fdir ++ else ++ as_dir=$dirpart/$fdir ++ as_dirs= ++ while test ! -d "$as_dir"; do ++ as_dirs="$as_dir $as_dirs" ++ as_dir=`(dirname "$as_dir") 2>/dev/null || ++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$as_dir" : 'X\(//\)[^/]' \| \ ++ X"$as_dir" : 'X\(//\)$' \| \ ++ X"$as_dir" : 'X\(/\)' \| \ ++ . : '\(.\)' 2>/dev/null || ++echo X"$as_dir" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } ++ /^X\(\/\/\)[^/].*/{ s//\1/; q; } ++ /^X\(\/\/\)$/{ s//\1/; q; } ++ /^X\(\/\).*/{ s//\1/; q; } ++ s/.*/./; q'` ++ done ++ test ! -n "$as_dirs" || mkdir $as_dirs ++ fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5 ++echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} ++ { (exit 1); exit 1; }; }; } ++ ++ # echo "creating $dirpart/$file" ++ echo '# dummy' > "$dirpart/$file" ++ done ++done ++ ;; ++ esac ++done ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF ++ ++{ (exit 0); exit 0; } ++_ACEOF + chmod +x $CONFIG_STATUS +-rm -fr confdefs* $ac_clean_files +-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 ++ac_clean_files=$ac_clean_files_save ++ ++ ++# configure is writing to config.log, and then calls config.status. ++# config.status does its own redirection, appending to config.log. ++# Unfortunately, on DOS this fails, as config.log is still kept open ++# by configure, so config.status won't be able to write to it; its ++# output is simply discarded. So we exec the FD to /dev/null, ++# effectively closing config.log, so it can be properly (re)opened and ++# appended to by config.status. When coming back to configure, we ++# need to make the FD available again. ++if test "$no_create" != yes; then ++ ac_cs_success=: ++ ac_config_status_args= ++ test "$silent" = yes && ++ ac_config_status_args="$ac_config_status_args --quiet" ++ exec 5>/dev/null ++ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false ++ exec 5>>config.log ++ # Use ||, not &&, to avoid exiting from the if with $? = 1, which ++ # would make configure fail if this is the last instruction. ++ $ac_cs_success || { (exit 1); exit 1; } ++fi + +Index: kxl-1.1.7/install-sh +=================================================================== +--- kxl-1.1.7.orig/install-sh 2003-01-02 05:05:20.000000000 +0100 ++++ kxl-1.1.7/install-sh 2006-05-09 18:51:27.000000000 +0200 +@@ -1,19 +1,38 @@ + #!/bin/sh +-# + # install - install a program, script, or datafile +-# This comes from X11R5 (mit/util/scripts/install.sh). ++ ++scriptversion=2005-05-14.22 ++ ++# This originates from X11R5 (mit/util/scripts/install.sh), which was ++# later released in X11R6 (xc/config/util/install.sh) with the ++# following copyright and license. ++# ++# Copyright (C) 1994 X Consortium ++# ++# Permission is hereby granted, free of charge, to any person obtaining a copy ++# of this software and associated documentation files (the "Software"), to ++# deal in the Software without restriction, including without limitation the ++# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or ++# sell copies of the Software, and to permit persons to whom the Software is ++# furnished to do so, subject to the following conditions: ++# ++# The above copyright notice and this permission notice shall be included in ++# all copies or substantial portions of the Software. + # +-# Copyright 1991 by the Massachusetts Institute of Technology ++# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR ++# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, ++# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE ++# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN ++# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- ++# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + # +-# Permission to use, copy, modify, distribute, and sell this software and its +-# documentation for any purpose is hereby granted without fee, provided that +-# the above copyright notice appear in all copies and that both that +-# copyright notice and this permission notice appear in supporting +-# documentation, and that the name of M.I.T. not be used in advertising or +-# publicity pertaining to distribution of the software without specific, +-# written prior permission. M.I.T. makes no representations about the +-# suitability of this software for any purpose. It is provided "as is" +-# without express or implied warranty. ++# Except as contained in this notice, the name of the X Consortium shall not ++# be used in advertising or otherwise to promote the sale, use or other deal- ++# ings in this Software without prior written authorization from the X Consor- ++# tium. ++# ++# ++# FSF changes to this file are in the public domain. + # + # Calling this script install-sh is preferred over install.sh, to prevent + # `make' implicit rules from creating a file called install from it +@@ -23,13 +42,11 @@ + # from scratch. It can only install one file at a time, a restriction + # shared with many OS's install programs. + +- + # set DOITPROG to echo to test this script + + # Don't use :- since 4.3BSD and earlier shells don't like it. + doit="${DOITPROG-}" + +- + # put in absolute paths if you don't have them in your path; or use env. vars. + + mvprog="${MVPROG-mv}" +@@ -41,211 +58,266 @@ + rmprog="${RMPROG-rm}" + mkdirprog="${MKDIRPROG-mkdir}" + +-transformbasename="" +-transform_arg="" +-instcmd="$mvprog" + chmodcmd="$chmodprog 0755" +-chowncmd="" +-chgrpcmd="" +-stripcmd="" ++chowncmd= ++chgrpcmd= ++stripcmd= + rmcmd="$rmprog -f" + mvcmd="$mvprog" +-src="" +-dst="" +-dir_arg="" +- +-while [ x"$1" != x ]; do +- case $1 in +- -c) instcmd="$cpprog" +- shift +- continue;; +- +- -d) dir_arg=true +- shift +- continue;; +- +- -m) chmodcmd="$chmodprog $2" +- shift +- shift +- continue;; +- +- -o) chowncmd="$chownprog $2" +- shift +- shift +- continue;; +- +- -g) chgrpcmd="$chgrpprog $2" +- shift +- shift +- continue;; +- +- -s) stripcmd="$stripprog" +- shift +- continue;; +- +- -t=*) transformarg=`echo $1 | sed 's/-t=//'` +- shift +- continue;; +- +- -b=*) transformbasename=`echo $1 | sed 's/-b=//'` +- shift +- continue;; +- +- *) if [ x"$src" = x ] +- then +- src=$1 +- else +- # this colon is to work around a 386BSD /bin/sh bug +- : +- dst=$1 +- fi +- shift +- continue;; +- esac +-done +- +-if [ x"$src" = x ] +-then +- echo "install: no input file specified" +- exit 1 +-else +- true +-fi +- +-if [ x"$dir_arg" != x ]; then +- dst=$src +- src="" +- +- if [ -d $dst ]; then +- instcmd=: +- chmodcmd="" +- else +- instcmd=mkdir +- fi +-else +- +-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command +-# might cause directories to be created, which would be especially bad +-# if $src (and thus $dsttmp) contains '*'. +- +- if [ -f $src -o -d $src ] +- then +- true +- else +- echo "install: $src does not exist" +- exit 1 +- fi +- +- if [ x"$dst" = x ] +- then +- echo "install: no destination specified" +- exit 1 +- else +- true +- fi +- +-# If destination is a directory, append the input filename; if your system +-# does not like double slashes in filenames, you may need to add some logic +- +- if [ -d $dst ] +- then +- dst="$dst"/`basename $src` +- else +- true +- fi +-fi +- +-## this sed command emulates the dirname command +-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` +- +-# Make sure that the destination directory exists. +-# this part is taken from Noah Friedman's mkinstalldirs script ++src= ++dst= ++dir_arg= ++dstarg= ++no_target_directory= ++ ++usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE ++ or: $0 [OPTION]... SRCFILES... DIRECTORY ++ or: $0 [OPTION]... -t DIRECTORY SRCFILES... ++ or: $0 [OPTION]... -d DIRECTORIES... ++ ++In the 1st form, copy SRCFILE to DSTFILE. ++In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. ++In the 4th, create DIRECTORIES. ++ ++Options: ++-c (ignored) ++-d create directories instead of installing files. ++-g GROUP $chgrpprog installed files to GROUP. ++-m MODE $chmodprog installed files to MODE. ++-o USER $chownprog installed files to USER. ++-s $stripprog installed files. ++-t DIRECTORY install into DIRECTORY. ++-T report an error if DSTFILE is a directory. ++--help display this help and exit. ++--version display version info and exit. ++ ++Environment variables override the default commands: ++ CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG ++" ++ ++while test -n "$1"; do ++ case $1 in ++ -c) shift ++ continue;; ++ ++ -d) dir_arg=true ++ shift ++ continue;; ++ ++ -g) chgrpcmd="$chgrpprog $2" ++ shift ++ shift ++ continue;; ++ ++ --help) echo "$usage"; exit $?;; ++ ++ -m) chmodcmd="$chmodprog $2" ++ shift ++ shift ++ continue;; ++ ++ -o) chowncmd="$chownprog $2" ++ shift ++ shift ++ continue;; ++ ++ -s) stripcmd=$stripprog ++ shift ++ continue;; + +-# Skip lots of stat calls in the usual case. +-if [ ! -d "$dstdir" ]; then +-defaultIFS=' +-' +-IFS="${IFS-${defaultIFS}}" +- +-oIFS="${IFS}" +-# Some sh's can't handle IFS=/ for some reason. +-IFS='%' +-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` +-IFS="${oIFS}" +- +-pathcomp='' ++ -t) dstarg=$2 ++ shift ++ shift ++ continue;; + +-while [ $# -ne 0 ] ; do +- pathcomp="${pathcomp}${1}" ++ -T) no_target_directory=true + shift ++ continue;; + +- if [ ! -d "${pathcomp}" ] ; +- then +- $mkdirprog "${pathcomp}" +- else +- true +- fi ++ --version) echo "$0 $scriptversion"; exit $?;; + +- pathcomp="${pathcomp}/" ++ *) # When -d is used, all remaining arguments are directories to create. ++ # When -t is used, the destination is already specified. ++ test -n "$dir_arg$dstarg" && break ++ # Otherwise, the last argument is the destination. Remove it from $@. ++ for arg ++ do ++ if test -n "$dstarg"; then ++ # $@ is not empty: it contains at least $arg. ++ set fnord "$@" "$dstarg" ++ shift # fnord ++ fi ++ shift # arg ++ dstarg=$arg ++ done ++ break;; ++ esac + done +-fi +- +-if [ x"$dir_arg" != x ] +-then +- $doit $instcmd $dst && +- +- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && +- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && +- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && +- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi +-else +- +-# If we're going to rename the final executable, determine the name now. +- +- if [ x"$transformarg" = x ] +- then +- dstfile=`basename $dst` +- else +- dstfile=`basename $dst $transformbasename | +- sed $transformarg`$transformbasename +- fi +- +-# don't allow the sed command to completely eliminate the filename +- +- if [ x"$dstfile" = x ] +- then +- dstfile=`basename $dst` +- else +- true +- fi +- +-# Make a temp file name in the proper directory. +- +- dsttmp=$dstdir/#inst.$$# +- +-# Move or copy the file name to the temp name + +- $doit $instcmd $src $dsttmp && +- +- trap "rm -f ${dsttmp}" 0 && +- +-# and set any options; do chmod last to preserve setuid bits +- +-# If any of these fail, we abort the whole thing. If we want to +-# ignore errors from any of these, just make sure not to ignore +-# errors from the above "$doit $instcmd $src $dsttmp" command. +- +- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && +- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && +- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && +- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && +- +-# Now rename the file to the real destination. +- +- $doit $rmcmd -f $dstdir/$dstfile && +- $doit $mvcmd $dsttmp $dstdir/$dstfile ++if test -z "$1"; then ++ if test -z "$dir_arg"; then ++ echo "$0: no input file specified." >&2 ++ exit 1 ++ fi ++ # It's OK to call `install-sh -d' without argument. ++ # This can happen when creating conditional directories. ++ exit 0 ++fi + +-fi && ++for src ++do ++ # Protect names starting with `-'. ++ case $src in ++ -*) src=./$src ;; ++ esac ++ ++ if test -n "$dir_arg"; then ++ dst=$src ++ src= ++ ++ if test -d "$dst"; then ++ mkdircmd=: ++ chmodcmd= ++ else ++ mkdircmd=$mkdirprog ++ fi ++ else ++ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command ++ # might cause directories to be created, which would be especially bad ++ # if $src (and thus $dsttmp) contains '*'. ++ if test ! -f "$src" && test ! -d "$src"; then ++ echo "$0: $src does not exist." >&2 ++ exit 1 ++ fi ++ ++ if test -z "$dstarg"; then ++ echo "$0: no destination specified." >&2 ++ exit 1 ++ fi ++ ++ dst=$dstarg ++ # Protect names starting with `-'. ++ case $dst in ++ -*) dst=./$dst ;; ++ esac + ++ # If destination is a directory, append the input filename; won't work ++ # if double slashes aren't ignored. ++ if test -d "$dst"; then ++ if test -n "$no_target_directory"; then ++ echo "$0: $dstarg: Is a directory" >&2 ++ exit 1 ++ fi ++ dst=$dst/`basename "$src"` ++ fi ++ fi ++ ++ # This sed command emulates the dirname command. ++ dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'` ++ ++ # Make sure that the destination directory exists. ++ ++ # Skip lots of stat calls in the usual case. ++ if test ! -d "$dstdir"; then ++ defaultIFS=' ++ ' ++ IFS="${IFS-$defaultIFS}" ++ ++ oIFS=$IFS ++ # Some sh's can't handle IFS=/ for some reason. ++ IFS='%' ++ set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` ++ shift ++ IFS=$oIFS ++ ++ pathcomp= ++ ++ while test $# -ne 0 ; do ++ pathcomp=$pathcomp$1 ++ shift ++ if test ! -d "$pathcomp"; then ++ $mkdirprog "$pathcomp" ++ # mkdir can fail with a `File exist' error in case several ++ # install-sh are creating the directory concurrently. This ++ # is OK. ++ test -d "$pathcomp" || exit ++ fi ++ pathcomp=$pathcomp/ ++ done ++ fi ++ ++ if test -n "$dir_arg"; then ++ $doit $mkdircmd "$dst" \ ++ && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ ++ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ ++ && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ ++ && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } ++ ++ else ++ dstfile=`basename "$dst"` ++ ++ # Make a couple of temp file names in the proper directory. ++ dsttmp=$dstdir/_inst.$$_ ++ rmtmp=$dstdir/_rm.$$_ ++ ++ # Trap to clean up those temp files at exit. ++ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 ++ trap '(exit $?); exit' 1 2 13 15 ++ ++ # Copy the file name to the temp name. ++ $doit $cpprog "$src" "$dsttmp" && ++ ++ # and set any options; do chmod last to preserve setuid bits. ++ # ++ # If any of these fail, we abort the whole thing. If we want to ++ # ignore errors from any of these, just make sure not to ignore ++ # errors from the above "$doit $cpprog $src $dsttmp" command. ++ # ++ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ ++ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ ++ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ ++ && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && ++ ++ # Now rename the file to the real destination. ++ { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \ ++ || { ++ # The rename failed, perhaps because mv can't rename something else ++ # to itself, or perhaps because mv is so ancient that it does not ++ # support -f. ++ ++ # Now remove or move aside any old file at destination location. ++ # We try this two ways since rm can't unlink itself on some ++ # systems and the destination file might be busy for other ++ # reasons. In this case, the final cleanup might fail but the new ++ # file should still install successfully. ++ { ++ if test -f "$dstdir/$dstfile"; then ++ $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ ++ || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ ++ || { ++ echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 ++ (exit 1); exit 1 ++ } ++ else ++ : ++ fi ++ } && ++ ++ # Now rename the file to the real destination. ++ $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" ++ } ++ } ++ fi || { (exit 1); exit 1; } ++done + +-exit 0 ++# The final little trick to "correctly" pass the exit status to the exit trap. ++{ ++ (exit 0); exit 0 ++} ++ ++# Local variables: ++# eval: (add-hook 'write-file-hooks 'time-stamp) ++# time-stamp-start: "scriptversion=" ++# time-stamp-format: "%:y-%02m-%02d.%02H" ++# time-stamp-end: "$" ++# End: +Index: kxl-1.1.7/ltmain.sh +=================================================================== +--- kxl-1.1.7.orig/ltmain.sh 2003-01-02 05:05:20.000000000 +0100 ++++ kxl-1.1.7/ltmain.sh 2006-03-11 19:49:04.000000000 +0100 +@@ -1,7 +1,7 @@ + # ltmain.sh - Provide generalized library-building support services. + # NOTE: Changing this file will not affect anything until you rerun configure. + # +-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005 + # Free Software Foundation, Inc. + # Originally by Gordon Matzigkeit , 1996 + # +@@ -17,13 +17,41 @@ + # + # You should have received a copy of the GNU General Public License + # along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + # + # As a special exception to the GNU General Public License, if you + # distribute this file as part of a program that contains a + # configuration script generated by Autoconf, you may include it under + # the same distribution terms that you use for the rest of that program. + ++basename="s,^.*/,,g" ++ ++# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh ++# is ksh but when the shell is invoked as "sh" and the current value of ++# the _XPG environment variable is not equal to 1 (one), the special ++# positional parameter $0, within a function call, is the name of the ++# function. ++progpath="$0" ++ ++# The name of this program: ++progname=`echo "$progpath" | $SED $basename` ++modename="$progname" ++ ++# Global variables: ++EXIT_SUCCESS=0 ++EXIT_FAILURE=1 ++ ++PROGRAM=ltmain.sh ++PACKAGE=libtool ++VERSION="1.5.22 Debian 1.5.22-4" ++TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)" ++ ++# See if we are running on zsh, and set the options which allow our ++# commands through without removal of \ escapes. ++if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++fi ++ + # Check that we have a working $echo. + if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. +@@ -36,7 +64,7 @@ + : + else + # Restart under the correct shell, and then maybe $echo will work. +- exec $SHELL "$0" --no-reexec ${1+"$@"} ++ exec $SHELL "$progpath" --no-reexec ${1+"$@"} + fi + + if test "X$1" = X--fallback-echo; then +@@ -45,19 +73,9 @@ + cat <&2 +- echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 +- exit 1 ++ $echo "$modename: not configured to build any kind of library" 1>&2 ++ $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 ++ exit $EXIT_FAILURE + fi + + # Global variables. +@@ -99,11 +132,268 @@ + show="$echo" + show_help= + execute_dlfiles= ++duplicate_deps=no ++preserve_args= + lo2o="s/\\.lo\$/.${objext}/" + o2lo="s/\\.${objext}\$/.lo/" + ++##################################### ++# Shell function definitions: ++# This seems to be the best place for them ++ ++# func_mktempdir [string] ++# Make a temporary directory that won't clash with other running ++# libtool processes, and avoids race conditions if possible. If ++# given, STRING is the basename for that directory. ++func_mktempdir () ++{ ++ my_template="${TMPDIR-/tmp}/${1-$progname}" ++ ++ if test "$run" = ":"; then ++ # Return a directory name, but don't create it in dry-run mode ++ my_tmpdir="${my_template}-$$" ++ else ++ ++ # If mktemp works, use that first and foremost ++ my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` ++ ++ if test ! -d "$my_tmpdir"; then ++ # Failing that, at least try and use $RANDOM to avoid a race ++ my_tmpdir="${my_template}-${RANDOM-0}$$" ++ ++ save_mktempdir_umask=`umask` ++ umask 0077 ++ $mkdir "$my_tmpdir" ++ umask $save_mktempdir_umask ++ fi ++ ++ # If we're not in dry-run mode, bomb out on failure ++ test -d "$my_tmpdir" || { ++ $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2 ++ exit $EXIT_FAILURE ++ } ++ fi ++ ++ $echo "X$my_tmpdir" | $Xsed ++} ++ ++ ++# func_win32_libid arg ++# return the library type of file 'arg' ++# ++# Need a lot of goo to handle *both* DLLs and import libs ++# Has to be a shell function in order to 'eat' the argument ++# that is supplied when $file_magic_command is called. ++func_win32_libid () ++{ ++ win32_libid_type="unknown" ++ win32_fileres=`file -L $1 2>/dev/null` ++ case $win32_fileres in ++ *ar\ archive\ import\ library*) # definitely import ++ win32_libid_type="x86 archive import" ++ ;; ++ *ar\ archive*) # could be an import, or static ++ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \ ++ $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then ++ win32_nmres=`eval $NM -f posix -A $1 | \ ++ $SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'` ++ case $win32_nmres in ++ import*) win32_libid_type="x86 archive import";; ++ *) win32_libid_type="x86 archive static";; ++ esac ++ fi ++ ;; ++ *DLL*) ++ win32_libid_type="x86 DLL" ++ ;; ++ *executable*) # but shell scripts are "executable" too... ++ case $win32_fileres in ++ *MS\ Windows\ PE\ Intel*) ++ win32_libid_type="x86 DLL" ++ ;; ++ esac ++ ;; ++ esac ++ $echo $win32_libid_type ++} ++ ++ ++# func_infer_tag arg ++# Infer tagged configuration to use if any are available and ++# if one wasn't chosen via the "--tag" command line option. ++# Only attempt this if the compiler in the base compile ++# command doesn't match the default compiler. ++# arg is usually of the form 'gcc ...' ++func_infer_tag () ++{ ++ if test -n "$available_tags" && test -z "$tagname"; then ++ CC_quoted= ++ for arg in $CC; do ++ case $arg in ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ arg="\"$arg\"" ++ ;; ++ esac ++ CC_quoted="$CC_quoted $arg" ++ done ++ case $@ in ++ # Blanks in the command may have been stripped by the calling shell, ++ # but not from the CC environment variable when configure was run. ++ " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;; ++ # Blanks at the start of $base_compile will cause this to fail ++ # if we don't check for them as well. ++ *) ++ for z in $available_tags; do ++ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then ++ # Evaluate the configuration. ++ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" ++ CC_quoted= ++ for arg in $CC; do ++ # Double-quote args containing other shell metacharacters. ++ case $arg in ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ arg="\"$arg\"" ++ ;; ++ esac ++ CC_quoted="$CC_quoted $arg" ++ done ++ case "$@ " in ++ " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ++ # The compiler in the base compile command matches ++ # the one in the tagged configuration. ++ # Assume this is the tagged configuration we want. ++ tagname=$z ++ break ++ ;; ++ esac ++ fi ++ done ++ # If $tagname still isn't set, then no tagged configuration ++ # was found and let the user know that the "--tag" command ++ # line option must be used. ++ if test -z "$tagname"; then ++ $echo "$modename: unable to infer tagged configuration" ++ $echo "$modename: specify a tag with \`--tag'" 1>&2 ++ exit $EXIT_FAILURE ++# else ++# $echo "$modename: using $tagname tagged configuration" ++ fi ++ ;; ++ esac ++ fi ++} ++ ++ ++# func_extract_an_archive dir oldlib ++func_extract_an_archive () ++{ ++ f_ex_an_ar_dir="$1"; shift ++ f_ex_an_ar_oldlib="$1" ++ ++ $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)" ++ $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $? ++ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then ++ : ++ else ++ $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++} ++ ++# func_extract_archives gentop oldlib ... ++func_extract_archives () ++{ ++ my_gentop="$1"; shift ++ my_oldlibs=${1+"$@"} ++ my_oldobjs="" ++ my_xlib="" ++ my_xabs="" ++ my_xdir="" ++ my_status="" ++ ++ $show "${rm}r $my_gentop" ++ $run ${rm}r "$my_gentop" ++ $show "$mkdir $my_gentop" ++ $run $mkdir "$my_gentop" ++ my_status=$? ++ if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then ++ exit $my_status ++ fi ++ ++ for my_xlib in $my_oldlibs; do ++ # Extract the objects. ++ case $my_xlib in ++ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; ++ *) my_xabs=`pwd`"/$my_xlib" ;; ++ esac ++ my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'` ++ my_xdir="$my_gentop/$my_xlib" ++ ++ $show "${rm}r $my_xdir" ++ $run ${rm}r "$my_xdir" ++ $show "$mkdir $my_xdir" ++ $run $mkdir "$my_xdir" ++ exit_status=$? ++ if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then ++ exit $exit_status ++ fi ++ case $host in ++ *-darwin*) ++ $show "Extracting $my_xabs" ++ # Do not bother doing anything if just a dry run ++ if test -z "$run"; then ++ darwin_orig_dir=`pwd` ++ cd $my_xdir || exit $? ++ darwin_archive=$my_xabs ++ darwin_curdir=`pwd` ++ darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'` ++ darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null` ++ if test -n "$darwin_arches"; then ++ darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'` ++ darwin_arch= ++ $show "$darwin_base_archive has multiple architectures $darwin_arches" ++ for darwin_arch in $darwin_arches ; do ++ mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}" ++ lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" ++ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" ++ func_extract_an_archive "`pwd`" "${darwin_base_archive}" ++ cd "$darwin_curdir" ++ $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" ++ done # $darwin_arches ++ ## Okay now we have a bunch of thin objects, gotta fatten them up :) ++ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP` ++ darwin_file= ++ darwin_files= ++ for darwin_file in $darwin_filelist; do ++ darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` ++ lipo -create -output "$darwin_file" $darwin_files ++ done # $darwin_filelist ++ ${rm}r unfat-$$ ++ cd "$darwin_orig_dir" ++ else ++ cd "$darwin_orig_dir" ++ func_extract_an_archive "$my_xdir" "$my_xabs" ++ fi # $darwin_arches ++ fi # $run ++ ;; ++ *) ++ func_extract_an_archive "$my_xdir" "$my_xabs" ++ ;; ++ esac ++ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` ++ done ++ func_extract_archives_result="$my_oldobjs" ++} ++# End of Shell function definitions ++##################################### ++ ++# Darwin sucks ++eval std_shrext=\"$shrext_cmds\" ++ ++disable_libs=no ++ + # Parse our command line options once, thoroughly. +-while test $# -gt 0 ++while test "$#" -gt 0 + do + arg="$1" + shift +@@ -119,6 +409,34 @@ + execute_dlfiles) + execute_dlfiles="$execute_dlfiles $arg" + ;; ++ tag) ++ tagname="$arg" ++ preserve_args="${preserve_args}=$arg" ++ ++ # Check whether tagname contains only valid characters ++ case $tagname in ++ *[!-_A-Za-z0-9,/]*) ++ $echo "$progname: invalid tag name: $tagname" 1>&2 ++ exit $EXIT_FAILURE ++ ;; ++ esac ++ ++ case $tagname in ++ CC) ++ # Don't test for the "default" C tag, as we know, it's there, but ++ # not specially marked. ++ ;; ++ *) ++ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then ++ taglist="$taglist $tagname" ++ # Evaluate the configuration. ++ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`" ++ else ++ $echo "$progname: ignoring unknown tag $tagname" 1>&2 ++ fi ++ ;; ++ esac ++ ;; + *) + eval "$prev=\$arg" + ;; +@@ -136,18 +454,27 @@ + ;; + + --version) +- echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" +- exit 0 ++ $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" ++ $echo ++ $echo "Copyright (C) 2005 Free Software Foundation, Inc." ++ $echo "This is free software; see the source for copying conditions. There is NO" ++ $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." ++ exit $? + ;; + + --config) +- sed -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0 +- exit 0 ++ ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath ++ # Now print the configurations for the tags. ++ for tagname in $taglist; do ++ ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath" ++ done ++ exit $? + ;; + + --debug) +- echo "$progname: enabling shell trace mode" ++ $echo "$progname: enabling shell trace mode" + set -x ++ preserve_args="$preserve_args $arg" + ;; + + --dry-run | -n) +@@ -155,18 +482,18 @@ + ;; + + --features) +- echo "host: $host" ++ $echo "host: $host" + if test "$build_libtool_libs" = yes; then +- echo "enable shared libraries" ++ $echo "enable shared libraries" + else +- echo "disable shared libraries" ++ $echo "disable shared libraries" + fi + if test "$build_old_libs" = yes; then +- echo "enable static libraries" ++ $echo "enable static libraries" + else +- echo "disable static libraries" ++ $echo "disable static libraries" + fi +- exit 0 ++ exit $? + ;; + + --finish) mode="finish" ;; +@@ -174,8 +501,23 @@ + --mode) prevopt="--mode" prev=mode ;; + --mode=*) mode="$optarg" ;; + ++ --preserve-dup-deps) duplicate_deps="yes" ;; ++ + --quiet | --silent) + show=: ++ preserve_args="$preserve_args $arg" ++ ;; ++ ++ --tag) ++ prevopt="--tag" ++ prev=tag ++ preserve_args="$preserve_args --tag" ++ ;; ++ --tag=*) ++ set tag "$optarg" ${1+"$@"} ++ shift ++ prev=tag ++ preserve_args="$preserve_args --tag" + ;; + + -dlopen) +@@ -186,7 +528,7 @@ + -*) + $echo "$modename: unrecognized option \`$arg'" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + ;; + + *) +@@ -199,15 +541,34 @@ + if test -n "$prevopt"; then + $echo "$modename: option \`$prevopt' requires an argument" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + ++case $disable_libs in ++no) ++ ;; ++shared) ++ build_libtool_libs=no ++ build_old_libs=yes ++ ;; ++static) ++ build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` ++ ;; ++esac ++ ++# If this variable is set in any of the actions, the command in it ++# will be execed at the end. This prevents here-documents from being ++# left over by shells. ++exec_cmd= ++ + if test -z "$show_help"; then + + # Infer the operation mode. + if test -z "$mode"; then ++ $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2 ++ $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2 + case $nonopt in +- *cc | *++ | gcc* | *-gcc*) ++ *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*) + mode=link + for arg + do +@@ -248,7 +609,7 @@ + if test -n "$execute_dlfiles" && test "$mode" != execute; then + $echo "$modename: unrecognized option \`-dlopen'" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + + # Change the help message to a mode-specific one. +@@ -262,158 +623,127 @@ + modename="$modename: compile" + # Get the compilation command and the source file. + base_compile= +- prev= +- lastarg= +- srcfile="$nonopt" ++ srcfile="$nonopt" # always keep a non-empty value in "srcfile" ++ suppress_opt=yes + suppress_output= ++ arg_mode=normal ++ libobj= ++ later= + +- user_target=no + for arg + do +- case $prev in +- "") ;; +- xcompiler) +- # Aesthetically quote the previous argument. +- prev= +- lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` +- +- case $arg in +- # Double-quote args containing other shell metacharacters. +- # Many Bourne shells cannot handle close brackets correctly +- # in scan sets, so we specify it separately. +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac +- +- # Add the previous argument to base_compile. +- if test -z "$base_compile"; then +- base_compile="$lastarg" +- else +- base_compile="$base_compile $lastarg" +- fi +- continue ++ case $arg_mode in ++ arg ) ++ # do not "continue". Instead, add this to base_compile ++ lastarg="$arg" ++ arg_mode=normal + ;; +- esac + +- # Accept any command-line options. +- case $arg in +- -o) +- if test "$user_target" != "no"; then +- $echo "$modename: you cannot specify \`-o' more than once" 1>&2 +- exit 1 +- fi +- user_target=next +- ;; +- +- -static) +- build_old_libs=yes ++ target ) ++ libobj="$arg" ++ arg_mode=normal + continue + ;; + +- -prefer-pic) +- pic_mode=yes +- continue +- ;; ++ normal ) ++ # Accept any command-line options. ++ case $arg in ++ -o) ++ if test -n "$libobj" ; then ++ $echo "$modename: you cannot specify \`-o' more than once" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ arg_mode=target ++ continue ++ ;; + +- -prefer-non-pic) +- pic_mode=no +- continue +- ;; ++ -static | -prefer-pic | -prefer-non-pic) ++ later="$later $arg" ++ continue ++ ;; + +- -Xcompiler) +- prev=xcompiler +- continue +- ;; ++ -no-suppress) ++ suppress_opt=no ++ continue ++ ;; + +- -Wc,*) +- args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` +- lastarg= +- IFS="${IFS= }"; save_ifs="$IFS"; IFS=',' +- for arg in $args; do +- IFS="$save_ifs" ++ -Xcompiler) ++ arg_mode=arg # the next one goes into the "base_compile" arg list ++ continue # The current "srcfile" will either be retained or ++ ;; # replaced later. I would guess that would be a bug. ++ ++ -Wc,*) ++ args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` ++ lastarg= ++ save_ifs="$IFS"; IFS=',' ++ for arg in $args; do ++ IFS="$save_ifs" + +- # Double-quote args containing other shell metacharacters. +- # Many Bourne shells cannot handle close brackets correctly +- # in scan sets, so we specify it separately. +- case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac +- lastarg="$lastarg $arg" +- done +- IFS="$save_ifs" +- lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` ++ # Double-quote args containing other shell metacharacters. ++ # Many Bourne shells cannot handle close brackets correctly ++ # in scan sets, so we specify it separately. ++ case $arg in ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ arg="\"$arg\"" ++ ;; ++ esac ++ lastarg="$lastarg $arg" ++ done ++ IFS="$save_ifs" ++ lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` + +- # Add the arguments to base_compile. +- if test -z "$base_compile"; then +- base_compile="$lastarg" +- else ++ # Add the arguments to base_compile. + base_compile="$base_compile $lastarg" +- fi +- continue +- ;; +- esac ++ continue ++ ;; + +- case $user_target in +- next) +- # The next one is the -o target name +- user_target=yes +- continue +- ;; +- yes) +- # We got the output file +- user_target=set +- libobj="$arg" +- continue ++ * ) ++ # Accept the current argument as the source file. ++ # The previous "srcfile" becomes the current argument. ++ # ++ lastarg="$srcfile" ++ srcfile="$arg" ++ ;; ++ esac # case $arg + ;; +- esac +- +- # Accept the current argument as the source file. +- lastarg="$srcfile" +- srcfile="$arg" ++ esac # case $arg_mode + + # Aesthetically quote the previous argument. +- +- # Backslashify any backslashes, double quotes, and dollar signs. +- # These are the only characters that are still specially +- # interpreted inside of double-quoted scrings. + lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` + ++ case $lastarg in + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly +- # in scan sets, so we specify it separately. +- case $lastarg in ++ # in scan sets, and some SunOS ksh mistreat backslash-escaping ++ # in scan sets (worked around with variable expansion), ++ # and furthermore cannot handle '|' '&' '(' ')' in scan sets ++ # at all, so we specify them separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + lastarg="\"$lastarg\"" + ;; + esac + +- # Add the previous argument to base_compile. +- if test -z "$base_compile"; then +- base_compile="$lastarg" +- else +- base_compile="$base_compile $lastarg" +- fi +- done ++ base_compile="$base_compile $lastarg" ++ done # for arg + +- case $user_target in +- set) ++ case $arg_mode in ++ arg) ++ $echo "$modename: you must specify an argument for -Xcompile" ++ exit $EXIT_FAILURE + ;; +- no) +- # Get the name of the library object. +- libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` ++ target) ++ $echo "$modename: you must specify a target with \`-o'" 1>&2 ++ exit $EXIT_FAILURE + ;; + *) +- $echo "$modename: you must specify a target with \`-o'" 1>&2 +- exit 1 ++ # Get the name of the library object. ++ [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` + ;; + esac + + # Recognize several different file suffixes. + # If the user specifies -o file.o, it is replaced with file.lo +- xform='[cCFSfmso]' ++ xform='[cCFSifmso]' + case $libobj in + *.ada) xform=ada ;; + *.adb) xform=adb ;; +@@ -421,10 +751,13 @@ + *.asm) xform=asm ;; + *.c++) xform=c++ ;; + *.cc) xform=cc ;; ++ *.ii) xform=ii ;; ++ *.class) xform=class ;; + *.cpp) xform=cpp ;; + *.cxx) xform=cxx ;; + *.f90) xform=f90 ;; + *.for) xform=for ;; ++ *.java) xform=java ;; + esac + + libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` +@@ -433,25 +766,63 @@ + *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; + *) + $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + ;; + esac + ++ func_infer_tag $base_compile ++ ++ for arg in $later; do ++ case $arg in ++ -static) ++ build_old_libs=yes ++ continue ++ ;; ++ ++ -prefer-pic) ++ pic_mode=yes ++ continue ++ ;; ++ ++ -prefer-non-pic) ++ pic_mode=no ++ continue ++ ;; ++ esac ++ done ++ ++ qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"` ++ case $qlibobj in ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ qlibobj="\"$qlibobj\"" ;; ++ esac ++ test "X$libobj" != "X$qlibobj" \ ++ && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \ ++ && $echo "$modename: libobj name \`$libobj' may not contain shell special characters." ++ objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` ++ xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` ++ if test "X$xdir" = "X$obj"; then ++ xdir= ++ else ++ xdir=$xdir/ ++ fi ++ lobj=${xdir}$objdir/$objname ++ + if test -z "$base_compile"; then + $echo "$modename: you must specify a compilation command" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + + # Delete any leftover library objects. + if test "$build_old_libs" = yes; then +- removelist="$obj $libobj" ++ removelist="$obj $lobj $libobj ${libobj}T" + else +- removelist="$libobj" ++ removelist="$lobj $libobj ${libobj}T" + fi + + $run $rm $removelist +- trap "$run $rm $removelist; exit 1" 1 2 15 ++ trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 + + # On Cygwin there's no "real" PIC flag so we must build both object types + case $host_os in +@@ -470,8 +841,9 @@ + output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} + lockfile="$output_obj.lock" + removelist="$removelist $output_obj $lockfile" +- trap "$run $rm $removelist; exit 1" 1 2 15 ++ trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 + else ++ output_obj= + need_locks=no + lockfile= + fi +@@ -479,13 +851,13 @@ + # Lock this critical section if it is needed + # We use this script file to make the link, it avoids creating a new file + if test "$need_locks" = yes; then +- until $run ln "$0" "$lockfile" 2>/dev/null; do ++ until $run ln "$progpath" "$lockfile" 2>/dev/null; do + $show "Waiting for $lockfile to be removed" + sleep 2 + done + elif test "$need_locks" = warn; then + if test -f "$lockfile"; then +- echo "\ ++ $echo "\ + *** ERROR, $lockfile exists and contains: + `cat $lockfile 2>/dev/null` + +@@ -497,14 +869,33 @@ + compiler." + + $run $rm $removelist +- exit 1 ++ exit $EXIT_FAILURE + fi +- echo $srcfile > "$lockfile" ++ $echo "$srcfile" > "$lockfile" + fi + + if test -n "$fix_srcfile_path"; then + eval srcfile=\"$fix_srcfile_path\" + fi ++ qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"` ++ case $qsrcfile in ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ qsrcfile="\"$qsrcfile\"" ;; ++ esac ++ ++ $run $rm "$libobj" "${libobj}T" ++ ++ # Create a libtool object file (analogous to a ".la" file), ++ # but don't create it if we're doing a dry run. ++ test -z "$run" && cat > ${libobj}T </dev/null`" != x"$srcfile"; then +- echo "\ ++ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then ++ $echo "\ + *** ERROR, $lockfile contains: + `cat $lockfile 2>/dev/null` + +@@ -573,13 +949,13 @@ + compiler." + + $run $rm $removelist +- exit 1 ++ exit $EXIT_FAILURE + fi + + # Just move the object if needed, then go on to compile the next one +- if test x"$output_obj" != x"$libobj"; then +- $show "$mv $output_obj $libobj" +- if $run $mv $output_obj $libobj; then : ++ if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then ++ $show "$mv $output_obj $lobj" ++ if $run $mv $output_obj $lobj; then : + else + error=$? + $run $rm $removelist +@@ -587,73 +963,50 @@ + fi + fi + +- # If we have no pic_flag, then copy the object into place and finish. +- if (test -z "$pic_flag" || test "$pic_mode" != default) && +- test "$build_old_libs" = yes; then +- # Rename the .lo from within objdir to obj +- if test -f $obj; then +- $show $rm $obj +- $run $rm $obj +- fi ++ # Append the name of the PIC object to the libtool object file. ++ test -z "$run" && cat >> ${libobj}T <> ${libobj}T </dev/null`" != x"$srcfile"; then +- echo "\ ++ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then ++ $echo "\ + *** ERROR, $lockfile contains: + `cat $lockfile 2>/dev/null` + +@@ -668,11 +1021,11 @@ + compiler." + + $run $rm $removelist +- exit 1 ++ exit $EXIT_FAILURE + fi + + # Just move the object if needed +- if test x"$output_obj" != x"$obj"; then ++ if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then + $show "$mv $output_obj $obj" + if $run $mv $output_obj $obj; then : + else +@@ -682,29 +1035,31 @@ + fi + fi + +- # Create an invalid libtool object if no PIC, so that we do not +- # accidentally link it into a program. +- if test "$build_libtool_libs" != yes; then +- $show "echo timestamp > $libobj" +- $run eval "echo timestamp > \$libobj" || exit $? +- else +- # Move the .lo from within objdir +- $show "$mv $libobj $lo_libobj" +- if $run $mv $libobj $lo_libobj; then : +- else +- error=$? +- $run $rm $removelist +- exit $error +- fi +- fi ++ # Append the name of the non-PIC object the libtool object file. ++ # Only append if the libtool object file exists. ++ test -z "$run" && cat >> ${libobj}T <> ${libobj}T </dev/null 2>&1; then ++ pic_object= ++ non_pic_object= ++ ++ # Read the .lo file ++ # If there is no directory component, then add one. ++ case $arg in ++ */* | *\\*) . $arg ;; ++ *) . ./$arg ;; ++ esac ++ ++ if test -z "$pic_object" || \ ++ test -z "$non_pic_object" || ++ test "$pic_object" = none && \ ++ test "$non_pic_object" = none; then ++ $echo "$modename: cannot find name of object for \`$arg'" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ ++ # Extract subdirectory from the argument. ++ xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` ++ if test "X$xdir" = "X$arg"; then ++ xdir= ++ else ++ xdir="$xdir/" ++ fi ++ ++ if test "$pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ pic_object="$xdir$pic_object" ++ ++ if test "$prev" = dlfiles; then ++ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then ++ dlfiles="$dlfiles $pic_object" ++ prev= ++ continue ++ else ++ # If libtool objects are unsupported, then we need to preload. ++ prev=dlprefiles ++ fi ++ fi ++ ++ # CHECK ME: I think I busted this. -Ossama ++ if test "$prev" = dlprefiles; then ++ # Preload the old-style object. ++ dlprefiles="$dlprefiles $pic_object" ++ prev= ++ fi ++ ++ # A PIC object. ++ libobjs="$libobjs $pic_object" ++ arg="$pic_object" ++ fi ++ ++ # Non-PIC object. ++ if test "$non_pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ non_pic_object="$xdir$non_pic_object" ++ ++ # A standard non-PIC object ++ non_pic_objects="$non_pic_objects $non_pic_object" ++ if test -z "$pic_object" || test "$pic_object" = none ; then ++ arg="$non_pic_object" ++ fi ++ else ++ # If the PIC object exists, use it instead. ++ # $xdir was prepended to $pic_object above. ++ non_pic_object="$pic_object" ++ non_pic_objects="$non_pic_objects $non_pic_object" ++ fi ++ else ++ # Only an error if not doing a dry-run. ++ if test -z "$run"; then ++ $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 ++ exit $EXIT_FAILURE ++ else ++ # Dry-run case. ++ ++ # Extract subdirectory from the argument. ++ xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` ++ if test "X$xdir" = "X$arg"; then ++ xdir= ++ else ++ xdir="$xdir/" ++ fi ++ ++ pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` ++ non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` ++ libobjs="$libobjs $pic_object" ++ non_pic_objects="$non_pic_objects $non_pic_object" ++ fi ++ fi ++ done ++ else ++ $echo "$modename: link input file \`$save_arg' does not exist" ++ exit $EXIT_FAILURE ++ fi ++ arg=$save_arg ++ prev= ++ continue ++ ;; + rpath | xrpath) + # We need an absolute path. + case $arg in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + $echo "$modename: only absolute run-paths are allowed" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + ;; + esac + if test "$prev" = rpath; then +@@ -918,13 +1404,33 @@ + finalize_command="$finalize_command $wl$qarg" + continue + ;; ++ xcclinker) ++ linker_flags="$linker_flags $qarg" ++ compiler_flags="$compiler_flags $qarg" ++ prev= ++ compile_command="$compile_command $qarg" ++ finalize_command="$finalize_command $qarg" ++ continue ++ ;; ++ shrext) ++ shrext_cmds="$arg" ++ prev= ++ continue ++ ;; ++ darwin_framework|darwin_framework_skip) ++ test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg" ++ compile_command="$compile_command $arg" ++ finalize_command="$finalize_command $arg" ++ prev= ++ continue ++ ;; + *) + eval "$prev=\"\$arg\"" + prev= + continue + ;; + esac +- fi # test -n $prev ++ fi # test -n "$prev" + + prevarg="$arg" + +@@ -966,7 +1472,7 @@ + -export-symbols | -export-symbols-regex) + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + $echo "$modename: more than one -exported-symbols argument is not allowed" +- exit 1 ++ exit $EXIT_FAILURE + fi + if test "X$arg" = "X-export-symbols"; then + prev=expsyms +@@ -976,11 +1482,28 @@ + continue + ;; + ++ -framework|-arch|-isysroot) ++ case " $CC " in ++ *" ${arg} ${1} "* | *" ${arg} ${1} "*) ++ prev=darwin_framework_skip ;; ++ *) compiler_flags="$compiler_flags $arg" ++ prev=darwin_framework ;; ++ esac ++ compile_command="$compile_command $arg" ++ finalize_command="$finalize_command $arg" ++ continue ++ ;; ++ ++ -inst-prefix-dir) ++ prev=inst_prefix ++ continue ++ ;; ++ + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* + # so, if we see these flags be careful not to treat them like -L + -L[A-Z][A-Z]*:*) + case $with_gcc/$host in +- no/*-*-irix*) ++ no/*-*-irix* | /*-*-irix*) + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + ;; +@@ -997,7 +1520,8 @@ + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 +- exit 1 ++ absdir="$dir" ++ notinst_path="$notinst_path $dir" + fi + dir="$absdir" + ;; +@@ -1011,10 +1535,15 @@ + esac + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) ++ testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$dir:"*) ;; + *) dllsearchpath="$dllsearchpath:$dir";; + esac ++ case :$dllsearchpath: in ++ *":$testbindir:"*) ;; ++ *) dllsearchpath="$dllsearchpath:$testbindir";; ++ esac + ;; + esac + continue +@@ -1023,25 +1552,98 @@ + -l*) + if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then + case $host in +- *-*-cygwin* | *-*-pw32* | *-*-beos*) ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*) + # These systems don't actually have a C or math library (as such) + continue + ;; +- *-*-mingw* | *-*-os2*) ++ *-*-os2*) + # These systems don't actually have a C library (as such) + test "X$arg" = "X-lc" && continue + ;; ++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) ++ # Do not include libc due to us having libc/libc_r. ++ test "X$arg" = "X-lc" && continue ++ ;; ++ *-*-rhapsody* | *-*-darwin1.[012]) ++ # Rhapsody C and math libraries are in the System framework ++ deplibs="$deplibs -framework System" ++ continue ++ ;; ++ *-*-sco3.2v5* | *-*-sco5v6*) ++ # Causes problems with __ctype ++ test "X$arg" = "X-lc" && continue ++ ;; ++ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) ++ # Compiler inserts libc in the correct place for threads to work ++ test "X$arg" = "X-lc" && continue ++ ;; + esac ++ elif test "X$arg" = "X-lc_r"; then ++ case $host in ++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) ++ # Do not include libc_r directly, use -pthread flag. ++ continue ++ ;; ++ esac + fi + deplibs="$deplibs $arg" + continue + ;; + ++ # Tru64 UNIX uses -model [arg] to determine the layout of C++ ++ # classes, name mangling, and exception handling. ++ -model) ++ compile_command="$compile_command $arg" ++ compiler_flags="$compiler_flags $arg" ++ finalize_command="$finalize_command $arg" ++ prev=xcompiler ++ continue ++ ;; ++ ++ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) ++ compiler_flags="$compiler_flags $arg" ++ compile_command="$compile_command $arg" ++ finalize_command="$finalize_command $arg" ++ continue ++ ;; ++ + -module) + module=yes + continue + ;; + ++ # -64, -mips[0-9] enable 64-bit mode on the SGI compiler ++ # -r[0-9][0-9]* specifies the processor on the SGI compiler ++ # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler ++ # +DA*, +DD* enable 64-bit mode on the HP compiler ++ # -q* pass through compiler args for the IBM compiler ++ # -m* pass through architecture-specific compiler args for GCC ++ # -m*, -t[45]*, -txscale* pass through architecture-specific ++ # compiler args for GCC ++ # -pg pass through profiling flag for GCC ++ # @file GCC response files ++ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \ ++ -t[45]*|-txscale*|@*) ++ ++ # Unknown arguments in both finalize_command and compile_command need ++ # to be aesthetically quoted because they are evaled later. ++ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` ++ case $arg in ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ arg="\"$arg\"" ++ ;; ++ esac ++ compile_command="$compile_command $arg" ++ finalize_command="$finalize_command $arg" ++ compiler_flags="$compiler_flags $arg" ++ continue ++ ;; ++ ++ -shrext) ++ prev=shrext ++ continue ++ ;; ++ + -no-fast-install) + fast_install=no + continue +@@ -1066,8 +1668,18 @@ + continue + ;; + ++ -objectlist) ++ prev=objectlist ++ continue ++ ;; ++ + -o) prev=output ;; + ++ -precious-files-regex) ++ prev=precious_regex ++ continue ++ ;; ++ + -release) + prev=release + continue +@@ -1090,7 +1702,7 @@ + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + $echo "$modename: only absolute run-paths are allowed" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + ;; + esac + case "$xrpath " in +@@ -1118,11 +1730,16 @@ + prev=vinfo + continue + ;; ++ -version-number) ++ prev=vinfo ++ vinfo_number=yes ++ continue ++ ;; + + -Wc,*) + args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` + arg= +- IFS="${IFS= }"; save_ifs="$IFS"; IFS=',' ++ save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + case $flag in +@@ -1140,7 +1757,7 @@ + -Wl,*) + args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` + arg= +- IFS="${IFS= }"; save_ifs="$IFS"; IFS=',' ++ save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + case $flag in +@@ -1166,6 +1783,11 @@ + continue + ;; + ++ -XCClinker) ++ prev=xcclinker ++ continue ++ ;; ++ + # Some other compiler flag. + -* | +*) + # Unknown arguments in both finalize_command and compile_command need +@@ -1178,29 +1800,106 @@ + esac + ;; + +- *.lo | *.$objext) +- # A library or standard object. +- if test "$prev" = dlfiles; then +- # This file was specified with -dlopen. +- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then +- dlfiles="$dlfiles $arg" +- prev= +- continue +- else +- # If libtool objects are unsupported, then we need to preload. +- prev=dlprefiles +- fi +- fi ++ *.$objext) ++ # A standard object. ++ objs="$objs $arg" ++ ;; + +- if test "$prev" = dlprefiles; then +- # Preload the old-style object. +- dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"` +- prev= +- else ++ *.lo) ++ # A libtool-controlled object. ++ ++ # Check to see that this really is a libtool object. ++ if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then ++ pic_object= ++ non_pic_object= ++ ++ # Read the .lo file ++ # If there is no directory component, then add one. + case $arg in +- *.lo) libobjs="$libobjs $arg" ;; +- *) objs="$objs $arg" ;; ++ */* | *\\*) . $arg ;; ++ *) . ./$arg ;; + esac ++ ++ if test -z "$pic_object" || \ ++ test -z "$non_pic_object" || ++ test "$pic_object" = none && \ ++ test "$non_pic_object" = none; then ++ $echo "$modename: cannot find name of object for \`$arg'" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ ++ # Extract subdirectory from the argument. ++ xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` ++ if test "X$xdir" = "X$arg"; then ++ xdir= ++ else ++ xdir="$xdir/" ++ fi ++ ++ if test "$pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ pic_object="$xdir$pic_object" ++ ++ if test "$prev" = dlfiles; then ++ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then ++ dlfiles="$dlfiles $pic_object" ++ prev= ++ continue ++ else ++ # If libtool objects are unsupported, then we need to preload. ++ prev=dlprefiles ++ fi ++ fi ++ ++ # CHECK ME: I think I busted this. -Ossama ++ if test "$prev" = dlprefiles; then ++ # Preload the old-style object. ++ dlprefiles="$dlprefiles $pic_object" ++ prev= ++ fi ++ ++ # A PIC object. ++ libobjs="$libobjs $pic_object" ++ arg="$pic_object" ++ fi ++ ++ # Non-PIC object. ++ if test "$non_pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ non_pic_object="$xdir$non_pic_object" ++ ++ # A standard non-PIC object ++ non_pic_objects="$non_pic_objects $non_pic_object" ++ if test -z "$pic_object" || test "$pic_object" = none ; then ++ arg="$non_pic_object" ++ fi ++ else ++ # If the PIC object exists, use it instead. ++ # $xdir was prepended to $pic_object above. ++ non_pic_object="$pic_object" ++ non_pic_objects="$non_pic_objects $non_pic_object" ++ fi ++ else ++ # Only an error if not doing a dry-run. ++ if test -z "$run"; then ++ $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 ++ exit $EXIT_FAILURE ++ else ++ # Dry-run case. ++ ++ # Extract subdirectory from the argument. ++ xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` ++ if test "X$xdir" = "X$arg"; then ++ xdir= ++ else ++ xdir="$xdir/" ++ fi ++ ++ pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` ++ non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` ++ libobjs="$libobjs $pic_object" ++ non_pic_objects="$non_pic_objects $non_pic_object" ++ fi + fi + ;; + +@@ -1251,7 +1950,7 @@ + if test -n "$prev"; then + $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + + if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then +@@ -1260,6 +1959,7 @@ + finalize_command="$finalize_command $arg" + fi + ++ oldlibs= + # calculate the name of the file, without its directory + outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` + libobjs_save="$libobjs" +@@ -1280,12 +1980,12 @@ + output_objdir="$output_objdir/$objdir" + fi + # Create the object directory. +- if test ! -d $output_objdir; then ++ if test ! -d "$output_objdir"; then + $show "$mkdir $output_objdir" + $run $mkdir $output_objdir +- status=$? +- if test $status -ne 0 && test ! -d $output_objdir; then +- exit $status ++ exit_status=$? ++ if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then ++ exit $exit_status + fi + fi + +@@ -1294,7 +1994,7 @@ + "") + $echo "$modename: you must specify an output file" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + ;; + *.$libext) linkmode=oldlib ;; + *.lo | *.$objext) linkmode=obj ;; +@@ -1302,22 +2002,52 @@ + *) linkmode=prog ;; # Anything else should be a program. + esac + ++ case $host in ++ *cygwin* | *mingw* | *pw32*) ++ # don't eliminate duplications in $postdeps and $predeps ++ duplicate_compiler_generated_deps=yes ++ ;; ++ *) ++ duplicate_compiler_generated_deps=$duplicate_deps ++ ;; ++ esac + specialdeplibs= ++ + libs= + # Find all interdependent deplibs by searching for libraries + # that are linked more than once (e.g. -la -lb -la) + for deplib in $deplibs; do +- case "$libs " in +- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; +- esac ++ if test "X$duplicate_deps" = "Xyes" ; then ++ case "$libs " in ++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; ++ esac ++ fi + libs="$libs $deplib" + done ++ ++ if test "$linkmode" = lib; then ++ libs="$predeps $libs $compiler_lib_search_path $postdeps" ++ ++ # Compute libraries that are listed more than once in $predeps ++ # $postdeps and mark them as special (i.e., whose duplicates are ++ # not to be eliminated). ++ pre_post_deps= ++ if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then ++ for pre_post_dep in $predeps $postdeps; do ++ case "$pre_post_deps " in ++ *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; ++ esac ++ pre_post_deps="$pre_post_deps $pre_post_dep" ++ done ++ fi ++ pre_post_deps= ++ fi ++ + deplibs= + newdependency_libs= + newlib_search_path= + need_relink=no # whether we're linking any uninstalled libtool libraries + notinst_deplibs= # not-installed libtool libraries +- notinst_path= # paths that contain not-installed libtool libraries + case $linkmode in + lib) + passes="conv link" +@@ -1326,7 +2056,7 @@ + *.la) ;; + *) + $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + ;; + esac + done +@@ -1343,39 +2073,58 @@ + ;; + esac + for pass in $passes; do ++ if test "$linkmode,$pass" = "lib,link" || ++ test "$linkmode,$pass" = "prog,scan"; then ++ libs="$deplibs" ++ deplibs= ++ fi + if test "$linkmode" = prog; then +- # Determine which files to process + case $pass in +- dlopen) +- libs="$dlfiles" +- save_deplibs="$deplibs" # Collect dlpreopened libraries +- deplibs= +- ;; ++ dlopen) libs="$dlfiles" ;; + dlpreopen) libs="$dlprefiles" ;; +- link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; ++ link) ++ libs="$deplibs %DEPLIBS%" ++ test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" ++ ;; + esac + fi ++ if test "$pass" = dlopen; then ++ # Collect dlpreopened libraries ++ save_deplibs="$deplibs" ++ deplibs= ++ fi + for deplib in $libs; do + lib= + found=no + case $deplib in +- -l*) +- if test "$linkmode" = oldlib && test "$linkmode" = obj; then +- $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2 +- continue ++ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ compiler_flags="$compiler_flags $deplib" + fi +- if test "$pass" = conv; then +- deplibs="$deplib $deplibs" ++ continue ++ ;; ++ -l*) ++ if test "$linkmode" != lib && test "$linkmode" != prog; then ++ $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 + continue + fi + name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` + for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do +- # Search the libtool library +- lib="$searchdir/lib${name}.la" +- if test -f "$lib"; then +- found=yes +- break +- fi ++ for search_ext in .la $std_shrext .so .a; do ++ # Search the libtool library ++ lib="$searchdir/lib${name}${search_ext}" ++ if test -f "$lib"; then ++ if test "$search_ext" = ".la"; then ++ found=yes ++ else ++ found=no ++ fi ++ break 2 ++ fi ++ done + done + if test "$found" != yes; then + # deplib doesn't seem to be a libtool library +@@ -1387,6 +2136,42 @@ + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue ++ else # deplib is a libtool library ++ # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, ++ # We need to do some special things here, and not later. ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ case " $predeps $postdeps " in ++ *" $deplib "*) ++ if (${SED} -e '2q' $lib | ++ grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then ++ library_names= ++ old_library= ++ case $lib in ++ */* | *\\*) . $lib ;; ++ *) . ./$lib ;; ++ esac ++ for l in $old_library $library_names; do ++ ll="$l" ++ done ++ if test "X$ll" = "X$old_library" ; then # only static version available ++ found=no ++ ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` ++ test "X$ladir" = "X$lib" && ladir="." ++ lib=$ladir/$old_library ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ deplibs="$deplib $deplibs" ++ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" ++ fi ++ continue ++ fi ++ fi ++ ;; ++ *) ;; ++ esac ++ fi + fi + ;; # -l + -L*) +@@ -1404,14 +2189,14 @@ + fi + if test "$pass" = scan; then + deplibs="$deplib $deplibs" +- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi ++ newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + ;; + *) +- $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2 ++ $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 + ;; + esac # linkmode + continue +@@ -1436,16 +2221,33 @@ + fi + case $linkmode in + lib) +- if test "$deplibs_check_method" != pass_all; then +- echo +- echo "*** Warning: This library needs some functionality provided by $deplib." +- echo "*** I have the capability to make that library automatically link in when" +- echo "*** you link to this library. But I can only do this if you have a" +- echo "*** shared version of the library, which you do not appear to have." ++ valid_a_lib=no ++ case $deplibs_check_method in ++ match_pattern*) ++ set dummy $deplibs_check_method ++ match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` ++ if eval $echo \"$deplib\" 2>/dev/null \ ++ | $SED 10q \ ++ | $EGREP "$match_pattern_regex" > /dev/null; then ++ valid_a_lib=yes ++ fi ++ ;; ++ pass_all) ++ valid_a_lib=yes ++ ;; ++ esac ++ if test "$valid_a_lib" != yes; then ++ $echo ++ $echo "*** Warning: Trying to link with static lib archive $deplib." ++ $echo "*** I have the capability to make that library automatically link in when" ++ $echo "*** you link to this library. But I can only do this if you have a" ++ $echo "*** shared version of the library, which you do not appear to have" ++ $echo "*** because the file extensions .$libext of this argument makes me believe" ++ $echo "*** that it is just a static archive that I should not used here." + else +- echo +- echo "*** Warning: Linking the shared library $output against the" +- echo "*** static library $deplib is not portable!" ++ $echo ++ $echo "*** Warning: Linking the shared library $output against the" ++ $echo "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + fi + continue +@@ -1462,14 +2264,18 @@ + esac # linkmode + ;; # *.$libext + *.lo | *.$objext) +- if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then +- # If there is no dlopen support or we're linking statically, +- # we need to preload. +- newdlprefiles="$newdlprefiles $deplib" +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- else +- newdlfiles="$newdlfiles $deplib" ++ if test "$pass" = conv; then ++ deplibs="$deplib $deplibs" ++ elif test "$linkmode" = prog; then ++ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then ++ # If there is no dlopen support or we're linking statically, ++ # we need to preload. ++ newdlprefiles="$newdlprefiles $deplib" ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ newdlfiles="$newdlfiles $deplib" ++ fi + fi + continue + ;; +@@ -1478,17 +2284,17 @@ + continue + ;; + esac # case $deplib +- if test $found = yes || test -f "$lib"; then : ++ if test "$found" = yes || test -f "$lib"; then : + else +- $echo "$modename: cannot find the library \`$lib'" 1>&2 +- exit 1 ++ $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2 ++ exit $EXIT_FAILURE + fi + + # Check to see that this really is a libtool archive. +- if (sed -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : ++ if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + + ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` +@@ -1501,8 +2307,11 @@ + library_names= + old_library= + # If the library was installed with an old release of libtool, +- # it will not redefine variable installed. ++ # it will not redefine variables installed, or shouldnotlink + installed=yes ++ shouldnotlink=no ++ avoidtemprpath= ++ + + # Read the .la file + case $lib in +@@ -1512,8 +2321,7 @@ + + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan" || +- { test "$linkmode" = oldlib && test "$linkmode" = obj; }; then +- # Add dl[pre]opened files of deplib ++ { test "$linkmode" != prog && test "$linkmode" != lib; }; then + test -n "$dlopen" && dlfiles="$dlfiles $dlopen" + test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" + fi +@@ -1524,7 +2332,7 @@ + if test -z "$libdir"; then + if test -z "$old_library"; then + $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + # It is a libtool convenience library, so add in its objects. + convenience="$convenience $ladir/$objdir/$old_library" +@@ -1532,18 +2340,21 @@ + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" +- case "$tmp_libs " in +- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; +- esac ++ if test "X$duplicate_deps" = "Xyes" ; then ++ case "$tmp_libs " in ++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; ++ esac ++ fi + tmp_libs="$tmp_libs $deplib" + done + elif test "$linkmode" != prog && test "$linkmode" != lib; then + $echo "$modename: \`$lib' is not a convenience library" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + continue + fi # $pass = conv + ++ + # Get the name of the library we link against. + linklib= + for l in $old_library $library_names; do +@@ -1551,19 +2362,23 @@ + done + if test -z "$linklib"; then + $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + + # This library was specified with -dlopen. + if test "$pass" = dlopen; then + if test -z "$libdir"; then + $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi +- if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then ++ if test -z "$dlname" || ++ test "$dlopen_support" != yes || ++ test "$build_libtool_libs" = no; then + # If there is no dlname, no dlopen support or we're linking +- # statically, we need to preload. +- dlprefiles="$dlprefiles $lib" ++ # statically, we need to preload. We also need to preload any ++ # dependent libraries so libltdl's deplib preloader doesn't ++ # bomb out in the load deplibs phase. ++ dlprefiles="$dlprefiles $lib $dependency_libs" + else + newdlfiles="$newdlfiles $lib" + fi +@@ -1595,11 +2410,19 @@ + dir="$libdir" + absdir="$libdir" + fi ++ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes + else +- dir="$ladir/$objdir" +- absdir="$abs_ladir/$objdir" +- # Remove this search path later +- notinst_path="$notinst_path $abs_ladir" ++ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then ++ dir="$ladir" ++ absdir="$abs_ladir" ++ # Remove this search path later ++ notinst_path="$notinst_path $abs_ladir" ++ else ++ dir="$ladir/$objdir" ++ absdir="$abs_ladir/$objdir" ++ # Remove this search path later ++ notinst_path="$notinst_path $abs_ladir" ++ fi + fi # $installed = yes + name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + +@@ -1607,7 +2430,7 @@ + if test "$pass" = dlpreopen; then + if test -z "$libdir"; then + $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). +@@ -1629,11 +2452,12 @@ + compile_deplibs="$dir/$old_library $compile_deplibs" + finalize_deplibs="$dir/$old_library $finalize_deplibs" + else +- deplibs="$lib $deplibs" ++ deplibs="$lib $deplibs" # used for prog,scan pass + fi + continue + fi + ++ + if test "$linkmode" = prog && test "$pass" != link; then + newlib_search_path="$newlib_search_path $ladir" + deplibs="$lib $deplibs" +@@ -1650,28 +2474,36 @@ + -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test + esac + # Need to link against all dependency_libs? +- if test $linkalldeplibs = yes; then ++ if test "$linkalldeplibs" = yes; then + deplibs="$deplib $deplibs" + else + # Need to hardcode shared library paths + # or/and link against static libraries + newdependency_libs="$deplib $newdependency_libs" + fi +- case "$tmp_libs " in +- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; +- esac ++ if test "X$duplicate_deps" = "Xyes" ; then ++ case "$tmp_libs " in ++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; ++ esac ++ fi + tmp_libs="$tmp_libs $deplib" + done # for deplib + continue + fi # $linkmode = prog... + +- link_static=no # Whether the deplib will be linked statically +- if test -n "$library_names" && +- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then +- # Link against this shared library ++ if test "$linkmode,$pass" = "prog,link"; then ++ if test -n "$library_names" && ++ { test "$prefer_static_libs" = no || test -z "$old_library"; }; then ++ # We need to hardcode the library path ++ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then ++ # Make sure the rpath contains only unique directories. ++ case "$temp_rpath " in ++ *" $dir "*) ;; ++ *" $absdir "*) ;; ++ *) temp_rpath="$temp_rpath $absdir" ;; ++ esac ++ fi + +- if test "$linkmode,$pass" = "prog,link" || +- { test "$linkmode" = lib && test "$hardcode_into_libs" = yes; }; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. +@@ -1693,17 +2525,6 @@ + esac + ;; + esac +- if test "$linkmode" = prog; then +- # We need to hardcode the library path +- if test -n "$shlibpath_var"; then +- # Make sure the rpath contains only unique directories. +- case "$temp_rpath " in +- *" $dir "*) ;; +- *" $absdir "*) ;; +- *) temp_rpath="$temp_rpath $dir" ;; +- esac +- fi +- fi + fi # $linkmode,$pass = prog,link... + + if test "$alldeplibs" = yes && +@@ -1713,11 +2534,56 @@ + # We only need to search for static libraries + continue + fi ++ fi + ++ link_static=no # Whether the deplib will be linked statically ++ use_static_libs=$prefer_static_libs ++ if test "$use_static_libs" = built && test "$installed" = yes ; then ++ use_static_libs=no ++ fi ++ if test -n "$library_names" && ++ { test "$use_static_libs" = no || test -z "$old_library"; }; then + if test "$installed" = no; then + notinst_deplibs="$notinst_deplibs $lib" + need_relink=yes + fi ++ # This is a shared library ++ ++ # Warn about portability, can't link against -module's on ++ # some systems (darwin) ++ if test "$shouldnotlink" = yes && test "$pass" = link ; then ++ $echo ++ if test "$linkmode" = prog; then ++ $echo "*** Warning: Linking the executable $output against the loadable module" ++ else ++ $echo "*** Warning: Linking the shared library $output against the loadable module" ++ fi ++ $echo "*** $linklib is not portable!" ++ fi ++ if test "$linkmode" = lib && ++ test "$hardcode_into_libs" = yes; then ++ # Hardcode the library path. ++ # Skip directories that are in the system default run-time ++ # search path. ++ case " $sys_lib_dlsearch_path " in ++ *" $absdir "*) ;; ++ *) ++ case "$compile_rpath " in ++ *" $absdir "*) ;; ++ *) compile_rpath="$compile_rpath $absdir" ++ esac ++ ;; ++ esac ++ case " $sys_lib_dlsearch_path " in ++ *" $libdir "*) ;; ++ *) ++ case "$finalize_rpath " in ++ *" $libdir "*) ;; ++ *) finalize_rpath="$finalize_rpath $libdir" ++ esac ++ ;; ++ esac ++ fi + + if test -n "$old_archive_from_expsyms_cmds"; then + # figure out the soname +@@ -1731,7 +2597,7 @@ + elif test -n "$soname_spec"; then + # bleh windows + case $host in +- *cygwin*) ++ *cygwin* | mingw*) + major=`expr $current - $age` + versuffix="-$major" + ;; +@@ -1743,17 +2609,18 @@ + + # Make a new name for the extract_expsyms_cmds to use + soroot="$soname" +- soname=`echo $soroot | sed -e 's/^.*\///'` +- newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a" ++ soname=`$echo $soroot | ${SED} -e 's/^.*\///'` ++ newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" + + # If the library has no export list, then create one now + if test -f "$output_objdir/$soname-def"; then : + else + $show "extracting exported symbol list from \`$soname'" +- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' +- eval cmds=\"$extract_expsyms_cmds\" ++ save_ifs="$IFS"; IFS='~' ++ cmds=$extract_expsyms_cmds + for cmd in $cmds; do + IFS="$save_ifs" ++ eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done +@@ -1763,10 +2630,11 @@ + # Create $newlib + if test -f "$output_objdir/$newlib"; then :; else + $show "generating import library for \`$soname'" +- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' +- eval cmds=\"$old_archive_from_expsyms_cmds\" ++ save_ifs="$IFS"; IFS='~' ++ cmds=$old_archive_from_expsyms_cmds + for cmd in $cmds; do + IFS="$save_ifs" ++ eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done +@@ -1775,7 +2643,7 @@ + # make sure the library variables are pointing to the new library + dir=$output_objdir + linklib=$newlib +- fi # test -n $old_archive_from_expsyms_cmds ++ fi # test -n "$old_archive_from_expsyms_cmds" + + if test "$linkmode" = prog || test "$mode" != relink; then + add_shlibpath= +@@ -1786,6 +2654,26 @@ + immediate | unsupported) + if test "$hardcode_direct" = no; then + add="$dir/$linklib" ++ case $host in ++ *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; ++ *-*-sysv4*uw2*) add_dir="-L$dir" ;; ++ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ ++ *-*-unixware7*) add_dir="-L$dir" ;; ++ *-*-darwin* ) ++ # if the lib is a module then we can not link against ++ # it, someone is ignoring the new warnings I added ++ if /usr/bin/file -L $add 2> /dev/null | ++ $EGREP ": [^:]* bundle" >/dev/null ; then ++ $echo "** Warning, lib $linklib is a module, not a shared library" ++ if test -z "$old_library" ; then ++ $echo ++ $echo "** And there doesn't seem to be a static archive available" ++ $echo "** The link will probably fail, sorry" ++ else ++ add="$dir/$old_library" ++ fi ++ fi ++ esac + elif test "$hardcode_minus_L" = no; then + case $host in + *-*-sunos*) add_shlibpath="$dir" ;; +@@ -1804,6 +2692,14 @@ + add="$dir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$dir" ++ # Try looking first in the location we're being installed to. ++ if test -n "$inst_prefix_dir"; then ++ case $libdir in ++ [\\/]*) ++ add_dir="$add_dir -L$inst_prefix_dir$libdir" ++ ;; ++ esac ++ fi + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + add_shlibpath="$dir" +@@ -1817,7 +2713,7 @@ + + if test "$lib_linked" != yes; then + $echo "$modename: configuration error: unsupported hardcode properties" +- exit 1 ++ exit $EXIT_FAILURE + fi + + if test -n "$add_shlibpath"; then +@@ -1859,9 +2755,24 @@ + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + add="-l$name" ++ elif test "$hardcode_automatic" = yes; then ++ if test -n "$inst_prefix_dir" && ++ test -f "$inst_prefix_dir$libdir/$linklib" ; then ++ add="$inst_prefix_dir$libdir/$linklib" ++ else ++ add="$libdir/$linklib" ++ fi + else + # We cannot seem to hardcode it, guess we'll fake it. + add_dir="-L$libdir" ++ # Try looking first in the location we're being installed to. ++ if test -n "$inst_prefix_dir"; then ++ case $libdir in ++ [\\/]*) ++ add_dir="$add_dir -L$inst_prefix_dir$libdir" ++ ;; ++ esac ++ fi + add="-l$name" + fi + +@@ -1874,15 +2785,6 @@ + fi + fi + elif test "$linkmode" = prog; then +- if test "$alldeplibs" = yes && +- { test "$deplibs_check_method" = pass_all || +- { test "$build_libtool_libs" = yes && +- test -n "$library_names"; }; }; then +- # We only need to search for static libraries +- continue +- fi +- +- # Try to link the static library + # Here we assume that one of hardcode_direct or hardcode_minus_L + # is not unsupported. This is valid on all known static and + # shared platforms. +@@ -1902,31 +2804,30 @@ + + # Just print a warning and add the library to dependency_libs so + # that the program can be linked against the static library. +- echo +- echo "*** Warning: This library needs some functionality provided by $lib." +- echo "*** I have the capability to make that library automatically link in when" +- echo "*** you link to this library. But I can only do this if you have a" +- echo "*** shared version of the library, which you do not appear to have." ++ $echo ++ $echo "*** Warning: This system can not link to static lib archive $lib." ++ $echo "*** I have the capability to make that library automatically link in when" ++ $echo "*** you link to this library. But I can only do this if you have a" ++ $echo "*** shared version of the library, which you do not appear to have." + if test "$module" = yes; then +- echo "*** Therefore, libtool will create a static module, that should work " +- echo "*** as long as the dlopening application is linked with the -dlopen flag." ++ $echo "*** But as you try to build a module library, libtool will still create " ++ $echo "*** a static module, that should work as long as the dlopening application" ++ $echo "*** is linked with the -dlopen flag to resolve symbols at runtime." + if test -z "$global_symbol_pipe"; then +- echo +- echo "*** However, this would only work if libtool was able to extract symbol" +- echo "*** lists from a program, using \`nm' or equivalent, but libtool could" +- echo "*** not find such a program. So, this module is probably useless." +- echo "*** \`nm' from GNU binutils and a full rebuild may help." ++ $echo ++ $echo "*** However, this would only work if libtool was able to extract symbol" ++ $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" ++ $echo "*** not find such a program. So, this module is probably useless." ++ $echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then +- build_libtool_libs=module +- build_old_libs=yes ++ build_libtool_libs=module ++ build_old_libs=yes + else +- build_libtool_libs=no ++ build_libtool_libs=no + fi + fi + else +- convenience="$convenience $dir/$old_library" +- old_convenience="$old_convenience $dir/$old_library" + deplibs="$dir/$old_library $deplibs" + link_static=yes + fi +@@ -1934,8 +2835,9 @@ + + if test "$linkmode" = lib; then + if test -n "$dependency_libs" && +- { test "$hardcode_into_libs" != yes || test $build_old_libs = yes || +- test $link_static = yes; }; then ++ { test "$hardcode_into_libs" != yes || ++ test "$build_old_libs" = yes || ++ test "$link_static" = yes; }; then + # Extract -R from dependency_libs + temp_deplibs= + for libdir in $dependency_libs; do +@@ -1958,9 +2860,11 @@ + tmp_libs= + for deplib in $dependency_libs; do + newdependency_libs="$deplib $newdependency_libs" +- case "$tmp_libs " in +- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; +- esac ++ if test "X$duplicate_deps" = "Xyes" ; then ++ case "$tmp_libs " in ++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; ++ esac ++ fi + tmp_libs="$tmp_libs $deplib" + done + +@@ -1984,29 +2888,75 @@ + ;; + esac + if grep "^installed=no" $deplib > /dev/null; then +- path="-L$absdir/$objdir" ++ path="$absdir/$objdir" + else +- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` ++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + if test -z "$libdir"; then + $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + if test "$absdir" != "$libdir"; then + $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 + fi +- path="-L$absdir" ++ path="$absdir" + fi ++ depdepl= ++ case $host in ++ *-*-darwin*) ++ # we do not want to link against static libs, ++ # but need to link against shared ++ eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` ++ if test -n "$deplibrary_names" ; then ++ for tmp in $deplibrary_names ; do ++ depdepl=$tmp ++ done ++ if test -f "$path/$depdepl" ; then ++ depdepl="$path/$depdepl" ++ fi ++ # do not add paths which are already there ++ case " $newlib_search_path " in ++ *" $path "*) ;; ++ *) newlib_search_path="$newlib_search_path $path";; ++ esac ++ fi ++ path="" ++ ;; ++ *) ++ path="-L$path" ++ ;; ++ esac ++ ;; ++ -l*) ++ case $host in ++ *-*-darwin*) ++ # Again, we only want to link against shared libraries ++ eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"` ++ for tmp in $newlib_search_path ; do ++ if test -f "$tmp/lib$tmp_libs.dylib" ; then ++ eval depdepl="$tmp/lib$tmp_libs.dylib" ++ break ++ fi ++ done ++ path="" ++ ;; ++ *) continue ;; ++ esac + ;; + *) continue ;; + esac + case " $deplibs " in + *" $path "*) ;; +- *) deplibs="$deplibs $path" ;; ++ *) deplibs="$path $deplibs" ;; ++ esac ++ case " $deplibs " in ++ *" $depdepl "*) ;; ++ *) deplibs="$depdepl $deplibs" ;; + esac + done + fi # link_all_deplibs != no + fi # linkmode = lib + done # for deplib in $libs ++ dependency_libs="$newdependency_libs" + if test "$pass" = dlpreopen; then + # Link the dlpreopened libraries before other libraries + for deplib in $save_deplibs; do +@@ -2014,7 +2964,6 @@ + done + fi + if test "$pass" != dlopen; then +- test "$pass" != scan && dependency_libs="$newdependency_libs" + if test "$pass" != conv; then + # Make sure lib_search_path contains only unique directories. + lib_search_path= +@@ -2037,9 +2986,30 @@ + eval tmp_libs=\"\$$var\" + new_libs= + for deplib in $tmp_libs; do ++ # FIXME: Pedantically, this is the right thing to do, so ++ # that some nasty dependency loop isn't accidentally ++ # broken: ++ #new_libs="$deplib $new_libs" ++ # Pragmatically, this seems to cause very few problems in ++ # practice: + case $deplib in + -L*) new_libs="$deplib $new_libs" ;; ++ -R*) ;; + *) ++ # And here is the reason: when a library appears more ++ # than once as an explicit dependence of a library, or ++ # is implicitly linked in more than once by the ++ # compiler, it is considered special, and multiple ++ # occurrences thereof are not removed. Compare this ++ # with having the same library being listed as a ++ # dependency of multiple other libraries: in this case, ++ # we know (pedantically, we assume) the library does not ++ # need to be listed more than once, so we keep only the ++ # last copy. This is not always right, but it is rare ++ # enough that we require users that really mean to play ++ # such unportable linking tricks to link the library ++ # using -Wl,-lname, so that libtool does not consider it ++ # for duplicate removal. + case " $specialdeplibs " in + *" $deplib "*) new_libs="$deplib $new_libs" ;; + *) +@@ -2067,11 +3037,20 @@ + eval $var=\"$tmp_libs\" + done # for var + fi +- if test "$pass" = "conv" && +- { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then +- libs="$deplibs" # reset libs +- deplibs= +- fi ++ # Last step: remove runtime libs from dependency_libs ++ # (they stay in deplibs) ++ tmp_libs= ++ for i in $dependency_libs ; do ++ case " $predeps $postdeps $compiler_lib_search_path " in ++ *" $i "*) ++ i="" ++ ;; ++ esac ++ if test -n "$i" ; then ++ tmp_libs="$tmp_libs $i" ++ fi ++ done ++ dependency_libs=$tmp_libs + done # for pass + if test "$linkmode" = prog; then + dlfiles="$newdlfiles" +@@ -2080,6 +3059,10 @@ + + case $linkmode in + oldlib) ++ if test -n "$deplibs"; then ++ $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 ++ fi ++ + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 + fi +@@ -2093,7 +3076,7 @@ + fi + + if test -n "$vinfo"; then +- $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2 ++ $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2 + fi + + if test -n "$release"; then +@@ -2115,17 +3098,19 @@ + case $outputname in + lib*) + name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` ++ eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + ;; + *) + if test "$module" = no; then + $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + if test "$need_lib_prefix" != no; then + # Add the "lib" prefix for modules if required + name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` ++ eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + else + libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` +@@ -2136,11 +3121,11 @@ + if test -n "$objs"; then + if test "$deplibs_check_method" != pass_all; then + $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 +- exit 1 ++ exit $EXIT_FAILURE + else +- echo +- echo "*** Warning: Linking the shared library $output against the non-libtool" +- echo "*** objects $objs is not portable!" ++ $echo ++ $echo "*** Warning: Linking the shared library $output against the non-libtool" ++ $echo "*** objects $objs is not portable!" + libobjs="$libobjs $objs" + fi + fi +@@ -2150,7 +3135,7 @@ + fi + + set dummy $rpath +- if test $# -gt 2; then ++ if test "$#" -gt 2; then + $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 + fi + install_libdir="$2" +@@ -2159,14 +3144,16 @@ + if test -z "$rpath"; then + if test "$build_libtool_libs" = yes; then + # Building a libtool convenience library. +- libext=al ++ # Some compilers have problems with a `.al' extension so ++ # convenience libraries should have the same extension an ++ # archive normally would. + oldlibs="$output_objdir/$libname.$libext $oldlibs" + build_libtool_libs=convenience + build_old_libs=yes + fi + + if test -n "$vinfo"; then +- $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2 ++ $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2 + fi + + if test -n "$release"; then +@@ -2175,52 +3162,94 @@ + else + + # Parse the version information argument. +- IFS="${IFS= }"; save_ifs="$IFS"; IFS=':' ++ save_ifs="$IFS"; IFS=':' + set dummy $vinfo 0 0 0 + IFS="$save_ifs" + + if test -n "$8"; then + $echo "$modename: too many parameters to \`-version-info'" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + +- current="$2" +- revision="$3" +- age="$4" ++ # convert absolute version numbers to libtool ages ++ # this retains compatibility with .la files and attempts ++ # to make the code below a bit more comprehensible ++ ++ case $vinfo_number in ++ yes) ++ number_major="$2" ++ number_minor="$3" ++ number_revision="$4" ++ # ++ # There are really only two kinds -- those that ++ # use the current revision as the major version ++ # and those that subtract age and use age as ++ # a minor version. But, then there is irix ++ # which has an extra 1 added just for fun ++ # ++ case $version_type in ++ darwin|linux|osf|windows) ++ current=`expr $number_major + $number_minor` ++ age="$number_minor" ++ revision="$number_revision" ++ ;; ++ freebsd-aout|freebsd-elf|sunos) ++ current="$number_major" ++ revision="$number_minor" ++ age="0" ++ ;; ++ irix|nonstopux) ++ current=`expr $number_major + $number_minor - 1` ++ age="$number_minor" ++ revision="$number_minor" ++ ;; ++ *) ++ $echo "$modename: unknown library version type \`$version_type'" 1>&2 ++ $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 ++ exit $EXIT_FAILURE ++ ;; ++ esac ++ ;; ++ no) ++ current="$2" ++ revision="$3" ++ age="$4" ++ ;; ++ esac + + # Check that each of the things are valid numbers. + case $current in +- 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; ++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) +- $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 ++ $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + ;; + esac + + case $revision in +- 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; ++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) +- $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 ++ $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + ;; + esac + + case $age in +- 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; ++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) +- $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 ++ $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + ;; + esac + +- if test $age -gt $current; then ++ if test "$age" -gt "$current"; then + $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + + # Calculate the version variables. +@@ -2237,7 +3266,7 @@ + versuffix="$major.$age.$revision" + # Darwin ld doesn't like 0 for these options... + minor_current=`expr $current + 1` +- verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" ++ verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" + ;; + + freebsd-aout) +@@ -2250,16 +3279,21 @@ + versuffix=".$current"; + ;; + +- irix) ++ irix | nonstopux) + major=`expr $current - $age + 1` +- verstring="sgi$major.$revision" ++ ++ case $version_type in ++ nonstopux) verstring_prefix=nonstopux ;; ++ *) verstring_prefix=sgi ;; ++ esac ++ verstring="$verstring_prefix$major.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$revision +- while test $loop != 0; do ++ while test "$loop" -ne 0; do + iface=`expr $revision - $loop` + loop=`expr $loop - 1` +- verstring="sgi$major.$iface:$verstring" ++ verstring="$verstring_prefix$major.$iface:$verstring" + done + + # Before this point, $major must not contain `.'. +@@ -2273,13 +3307,13 @@ + ;; + + osf) +- major=`expr $current - $age` ++ major=.`expr $current - $age` + versuffix=".$current.$age.$revision" + verstring="$current.$age.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$age +- while test $loop != 0; do ++ while test "$loop" -ne 0; do + iface=`expr $current - $loop` + loop=`expr $loop - 1` + verstring="$verstring:${iface}.0" +@@ -2303,15 +3337,24 @@ + + *) + $echo "$modename: unknown library version type \`$version_type'" 1>&2 +- echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 +- exit 1 ++ $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 ++ exit $EXIT_FAILURE + ;; + esac + + # Clear the version info if we defaulted, and they specified a release. + if test -z "$vinfo" && test -n "$release"; then + major= +- verstring="0.0" ++ case $version_type in ++ darwin) ++ # we can't check for "0.0" in archive_cmds due to quoting ++ # problems, so we reset it completely ++ verstring= ++ ;; ++ *) ++ verstring="0.0" ++ ;; ++ esac + if test "$need_version" = no; then + versuffix= + else +@@ -2340,9 +3383,30 @@ + fi + + if test "$mode" != relink; then +- # Remove our outputs. +- $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*" +- $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.* ++ # Remove our outputs, but don't remove object files since they ++ # may have been created when compiling PIC objects. ++ removelist= ++ tempremovelist=`$echo "$output_objdir/*"` ++ for p in $tempremovelist; do ++ case $p in ++ *.$objext) ++ ;; ++ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) ++ if test "X$precious_files_regex" != "X"; then ++ if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 ++ then ++ continue ++ fi ++ fi ++ removelist="$removelist $p" ++ ;; ++ *) ;; ++ esac ++ done ++ if test -n "$removelist"; then ++ $show "${rm}r $removelist" ++ $run ${rm}r $removelist ++ fi + fi + + # Now set the variables for building old libraries. +@@ -2355,9 +3419,9 @@ + + # Eliminate all temporary directories. + for path in $notinst_path; do +- lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'` +- deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'` +- dependency_libs=`echo "$dependency_libs " | sed -e 's% -L$path % %g'` ++ lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"` ++ deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"` ++ dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"` + done + + if test -n "$xrpath"; then +@@ -2370,7 +3434,7 @@ + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done +- if test $hardcode_into_libs != yes || test $build_old_libs = yes; then ++ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then + dependency_libs="$temp_xrpath $dependency_libs" + fi + fi +@@ -2408,7 +3472,16 @@ + *-*-netbsd*) + # Don't link with libc until the a.out ld.so is fixed. + ;; +- *) ++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) ++ # Do not include libc due to us having libc/libc_r. ++ ;; ++ *-*-sco3.2v5* | *-*-sco5v6*) ++ # Causes problems with __ctype ++ ;; ++ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) ++ # Compiler inserts libc in the correct place for threads to work ++ ;; ++ *) + # Add libc to deplibs on all other systems if necessary. + if test "$build_libtool_need_lc" = "yes"; then + deplibs="$deplibs -lc" +@@ -2437,7 +3510,7 @@ + # This might be a little naive. We might want to check + # whether the library exists or not. But this is on + # osf3 & osf4 and I'm not really sure... Just +- # implementing what was already the behaviour. ++ # implementing what was already the behavior. + newdeplibs=$deplibs + ;; + test_compile) +@@ -2450,64 +3523,88 @@ + int main() { return 0; } + EOF + $rm conftest +- $CC -o conftest conftest.c $deplibs +- if test $? -eq 0 ; then ++ $LTCC $LTCFLAGS -o conftest conftest.c $deplibs ++ if test "$?" -eq 0 ; then + ldd_output=`ldd conftest` + for i in $deplibs; do +- name="`expr $i : '-l\(.*\)'`" ++ name=`expr $i : '-l\(.*\)'` + # If $name is empty we are operating on a -L argument. +- if test -n "$name" && test "$name" != "0"; then +- libname=`eval \\$echo \"$libname_spec\"` +- deplib_matches=`eval \\$echo \"$library_names_spec\"` +- set dummy $deplib_matches +- deplib_match=$2 +- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then +- newdeplibs="$newdeplibs $i" +- else +- droppeddeps=yes +- echo +- echo "*** Warning: This library needs some functionality provided by $i." +- echo "*** I have the capability to make that library automatically link in when" +- echo "*** you link to this library. But I can only do this if you have a" +- echo "*** shared version of the library, which you do not appear to have." ++ if test "$name" != "" && test "$name" -ne "0"; then ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ case " $predeps $postdeps " in ++ *" $i "*) ++ newdeplibs="$newdeplibs $i" ++ i="" ++ ;; ++ esac ++ fi ++ if test -n "$i" ; then ++ libname=`eval \\$echo \"$libname_spec\"` ++ deplib_matches=`eval \\$echo \"$library_names_spec\"` ++ set dummy $deplib_matches ++ deplib_match=$2 ++ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then ++ newdeplibs="$newdeplibs $i" ++ else ++ droppeddeps=yes ++ $echo ++ $echo "*** Warning: dynamic linker does not accept needed library $i." ++ $echo "*** I have the capability to make that library automatically link in when" ++ $echo "*** you link to this library. But I can only do this if you have a" ++ $echo "*** shared version of the library, which I believe you do not have" ++ $echo "*** because a test_compile did reveal that the linker did not use it for" ++ $echo "*** its dynamic dependency list that programs get resolved with at runtime." ++ fi + fi + else + newdeplibs="$newdeplibs $i" + fi + done + else +- # Error occured in the first compile. Let's try to salvage the situation: +- # Compile a seperate program for each library. ++ # Error occurred in the first compile. Let's try to salvage ++ # the situation: Compile a separate program for each library. + for i in $deplibs; do +- name="`expr $i : '-l\(.*\)'`" +- # If $name is empty we are operating on a -L argument. +- if test -n "$name" && test "$name" != "0"; then ++ name=`expr $i : '-l\(.*\)'` ++ # If $name is empty we are operating on a -L argument. ++ if test "$name" != "" && test "$name" != "0"; then + $rm conftest +- $CC -o conftest conftest.c $i ++ $LTCC $LTCFLAGS -o conftest conftest.c $i + # Did it work? +- if test $? -eq 0 ; then ++ if test "$?" -eq 0 ; then + ldd_output=`ldd conftest` +- libname=`eval \\$echo \"$libname_spec\"` +- deplib_matches=`eval \\$echo \"$library_names_spec\"` +- set dummy $deplib_matches +- deplib_match=$2 +- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then +- newdeplibs="$newdeplibs $i" +- else +- droppeddeps=yes +- echo +- echo "*** Warning: This library needs some functionality provided by $i." +- echo "*** I have the capability to make that library automatically link in when" +- echo "*** you link to this library. But I can only do this if you have a" +- echo "*** shared version of the library, which you do not appear to have." ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ case " $predeps $postdeps " in ++ *" $i "*) ++ newdeplibs="$newdeplibs $i" ++ i="" ++ ;; ++ esac ++ fi ++ if test -n "$i" ; then ++ libname=`eval \\$echo \"$libname_spec\"` ++ deplib_matches=`eval \\$echo \"$library_names_spec\"` ++ set dummy $deplib_matches ++ deplib_match=$2 ++ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then ++ newdeplibs="$newdeplibs $i" ++ else ++ droppeddeps=yes ++ $echo ++ $echo "*** Warning: dynamic linker does not accept needed library $i." ++ $echo "*** I have the capability to make that library automatically link in when" ++ $echo "*** you link to this library. But I can only do this if you have a" ++ $echo "*** shared version of the library, which you do not appear to have" ++ $echo "*** because a test_compile did reveal that the linker did not use this one" ++ $echo "*** as a dynamic dependency that programs can get resolved with at runtime." ++ fi + fi + else + droppeddeps=yes +- echo +- echo "*** Warning! Library $i is needed by this library but I was not able to" +- echo "*** make it link in! You will probably need to install it or some" +- echo "*** library that it depends on before this library will be fully" +- echo "*** functional. Installing it before continuing would be even better." ++ $echo ++ $echo "*** Warning! Library $i is needed by this library but I was not able to" ++ $echo "*** make it link in! You will probably need to install it or some" ++ $echo "*** library that it depends on before this library will be fully" ++ $echo "*** functional. Installing it before continuing would be even better." + fi + else + newdeplibs="$newdeplibs $i" +@@ -2519,13 +3616,22 @@ + set dummy $deplibs_check_method + file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` + for a_deplib in $deplibs; do +- name="`expr $a_deplib : '-l\(.*\)'`" ++ name=`expr $a_deplib : '-l\(.*\)'` + # If $name is empty we are operating on a -L argument. +- if test -n "$name" && test "$name" != "0"; then +- libname=`eval \\$echo \"$libname_spec\"` +- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do +- potential_libs=`ls $i/$libname[.-]* 2>/dev/null` +- for potent_lib in $potential_libs; do ++ if test "$name" != "" && test "$name" != "0"; then ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ case " $predeps $postdeps " in ++ *" $a_deplib "*) ++ newdeplibs="$newdeplibs $a_deplib" ++ a_deplib="" ++ ;; ++ esac ++ fi ++ if test -n "$a_deplib" ; then ++ libname=`eval \\$echo \"$libname_spec\"` ++ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do ++ potential_libs=`ls $i/$libname[.-]* 2>/dev/null` ++ for potent_lib in $potential_libs; do + # Follow soft links. + if ls -lLd "$potent_lib" 2>/dev/null \ + | grep " -> " >/dev/null; then +@@ -2538,28 +3644,36 @@ + # but so what? + potlib="$potent_lib" + while test -h "$potlib" 2>/dev/null; do +- potliblink=`ls -ld $potlib | sed 's/.* -> //'` ++ potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` + case $potliblink in + [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; + *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; + esac + done + if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ +- | sed 10q \ +- | egrep "$file_magic_regex" > /dev/null; then ++ | ${SED} 10q \ ++ | $EGREP "$file_magic_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi +- done +- done ++ done ++ done ++ fi + if test -n "$a_deplib" ; then + droppeddeps=yes +- echo +- echo "*** Warning: This library needs some functionality provided by $a_deplib." +- echo "*** I have the capability to make that library automatically link in when" +- echo "*** you link to this library. But I can only do this if you have a" +- echo "*** shared version of the library, which you do not appear to have." ++ $echo ++ $echo "*** Warning: linker path does not have real file for library $a_deplib." ++ $echo "*** I have the capability to make that library automatically link in when" ++ $echo "*** you link to this library. But I can only do this if you have a" ++ $echo "*** shared version of the library, which you do not appear to have" ++ $echo "*** because I did check the linker path looking for a file starting" ++ if test -z "$potlib" ; then ++ $echo "*** with $libname but no candidates were found. (...for file magic test)" ++ else ++ $echo "*** with $libname and none of the candidates passed a file format test" ++ $echo "*** using a file magic. Last file checked: $potlib" ++ fi + fi + else + # Add a -L argument. +@@ -2571,29 +3685,47 @@ + set dummy $deplibs_check_method + match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` + for a_deplib in $deplibs; do +- name="`expr $a_deplib : '-l\(.*\)'`" ++ name=`expr $a_deplib : '-l\(.*\)'` + # If $name is empty we are operating on a -L argument. + if test -n "$name" && test "$name" != "0"; then +- libname=`eval \\$echo \"$libname_spec\"` +- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do +- potential_libs=`ls $i/$libname[.-]* 2>/dev/null` +- for potent_lib in $potential_libs; do +- if eval echo \"$potent_lib\" 2>/dev/null \ +- | sed 10q \ +- | egrep "$match_pattern_regex" > /dev/null; then +- newdeplibs="$newdeplibs $a_deplib" +- a_deplib="" +- break 2 +- fi ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ case " $predeps $postdeps " in ++ *" $a_deplib "*) ++ newdeplibs="$newdeplibs $a_deplib" ++ a_deplib="" ++ ;; ++ esac ++ fi ++ if test -n "$a_deplib" ; then ++ libname=`eval \\$echo \"$libname_spec\"` ++ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do ++ potential_libs=`ls $i/$libname[.-]* 2>/dev/null` ++ for potent_lib in $potential_libs; do ++ potlib="$potent_lib" # see symlink-check above in file_magic test ++ if eval $echo \"$potent_lib\" 2>/dev/null \ ++ | ${SED} 10q \ ++ | $EGREP "$match_pattern_regex" > /dev/null; then ++ newdeplibs="$newdeplibs $a_deplib" ++ a_deplib="" ++ break 2 ++ fi ++ done + done +- done ++ fi + if test -n "$a_deplib" ; then + droppeddeps=yes +- echo +- echo "*** Warning: This library needs some functionality provided by $a_deplib." +- echo "*** I have the capability to make that library automatically link in when" +- echo "*** you link to this library. But I can only do this if you have a" +- echo "*** shared version of the library, which you do not appear to have." ++ $echo ++ $echo "*** Warning: linker path does not have real file for library $a_deplib." ++ $echo "*** I have the capability to make that library automatically link in when" ++ $echo "*** you link to this library. But I can only do this if you have a" ++ $echo "*** shared version of the library, which you do not appear to have" ++ $echo "*** because I did check the linker path looking for a file starting" ++ if test -z "$potlib" ; then ++ $echo "*** with $libname but no candidates were found. (...for regex pattern test)" ++ else ++ $echo "*** with $libname and none of the candidates passed a file format test" ++ $echo "*** using a regex pattern. Last file checked: $potlib" ++ fi + fi + else + # Add a -L argument. +@@ -2603,16 +3735,23 @@ + ;; + none | unknown | *) + newdeplibs="" +- if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ +- -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' | +- grep . >/dev/null; then +- echo ++ tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ ++ -e 's/ -[LR][^ ]*//g'` ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ for i in $predeps $postdeps ; do ++ # can't use Xsed below, because $i might contain '/' ++ tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"` ++ done ++ fi ++ if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \ ++ | grep . >/dev/null; then ++ $echo + if test "X$deplibs_check_method" = "Xnone"; then +- echo "*** Warning: inter-library dependencies are not supported in this platform." ++ $echo "*** Warning: inter-library dependencies are not supported in this platform." + else +- echo "*** Warning: inter-library dependencies are not known to be supported." ++ $echo "*** Warning: inter-library dependencies are not known to be supported." + fi +- echo "*** All declared inter-library dependencies are being dropped." ++ $echo "*** All declared inter-library dependencies are being dropped." + droppeddeps=yes + fi + ;; +@@ -2632,17 +3771,17 @@ + + if test "$droppeddeps" = yes; then + if test "$module" = yes; then +- echo +- echo "*** Warning: libtool could not satisfy all declared inter-library" +- echo "*** dependencies of module $libname. Therefore, libtool will create" +- echo "*** a static module, that should work as long as the dlopening" +- echo "*** application is linked with the -dlopen flag." ++ $echo ++ $echo "*** Warning: libtool could not satisfy all declared inter-library" ++ $echo "*** dependencies of module $libname. Therefore, libtool will create" ++ $echo "*** a static module, that should work as long as the dlopening" ++ $echo "*** application is linked with the -dlopen flag." + if test -z "$global_symbol_pipe"; then +- echo +- echo "*** However, this would only work if libtool was able to extract symbol" +- echo "*** lists from a program, using \`nm' or equivalent, but libtool could" +- echo "*** not find such a program. So, this module is probably useless." +- echo "*** \`nm' from GNU binutils and a full rebuild may help." ++ $echo ++ $echo "*** However, this would only work if libtool was able to extract symbol" ++ $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" ++ $echo "*** not find such a program. So, this module is probably useless." ++ $echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" +@@ -2652,16 +3791,16 @@ + build_libtool_libs=no + fi + else +- echo "*** The inter-library dependencies that have been dropped here will be" +- echo "*** automatically added whenever a program is linked with this library" +- echo "*** or is declared to -dlopen it." +- +- if test $allow_undefined = no; then +- echo +- echo "*** Since this library must not contain undefined symbols," +- echo "*** because either the platform does not support them or" +- echo "*** it was explicitly requested with -no-undefined," +- echo "*** libtool will only create a static version of it." ++ $echo "*** The inter-library dependencies that have been dropped here will be" ++ $echo "*** automatically added whenever a program is linked with this library" ++ $echo "*** or is declared to -dlopen it." ++ ++ if test "$allow_undefined" = no; then ++ $echo ++ $echo "*** Since this library must not contain undefined symbols," ++ $echo "*** because either the platform does not support them or" ++ $echo "*** it was explicitly requested with -no-undefined," ++ $echo "*** libtool will only create a static version of it." + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module +@@ -2676,6 +3815,35 @@ + deplibs=$newdeplibs + fi + ++ ++ # move library search paths that coincide with paths to not yet ++ # installed libraries to the beginning of the library search list ++ new_libs= ++ for path in $notinst_path; do ++ case " $new_libs " in ++ *" -L$path/$objdir "*) ;; ++ *) ++ case " $deplibs " in ++ *" -L$path/$objdir "*) ++ new_libs="$new_libs -L$path/$objdir" ;; ++ esac ++ ;; ++ esac ++ done ++ for deplib in $deplibs; do ++ case $deplib in ++ -L*) ++ case " $new_libs " in ++ *" $deplib "*) ;; ++ *) new_libs="$new_libs $deplib" ;; ++ esac ++ ;; ++ *) new_libs="$new_libs $deplib" ;; ++ esac ++ done ++ deplibs="$new_libs" ++ ++ + # All the library-specific variables (install_libdir is set above). + library_names= + old_library= +@@ -2719,7 +3887,11 @@ + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" +- eval dep_rpath=\"$hardcode_libdir_flag_spec\" ++ if test -n "$hardcode_libdir_flag_spec_ld"; then ++ eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ++ else ++ eval dep_rpath=\"$hardcode_libdir_flag_spec\" ++ fi + fi + if test -n "$runpath_var" && test -n "$perm_rpath"; then + # We should set the runpath_var. +@@ -2739,6 +3911,7 @@ + fi + + # Get the real and link names of the library. ++ eval shared_ext=\"$shrext_cmds\" + eval library_names=\"$library_names_spec\" + set dummy $library_names + realname="$2" +@@ -2749,31 +3922,17 @@ + else + soname="$realname" + fi +- test -z "$dlname" && dlname=$soname ++ if test -z "$dlname"; then ++ dlname=$soname ++ fi + + lib="$output_objdir/$realname" ++ linknames= + for link + do + linknames="$linknames $link" + done + +- # Ensure that we have .o objects for linkers which dislike .lo +- # (e.g. aix) in case we are running --disable-static +- for obj in $libobjs; do +- xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$xdir" = "X$obj"; then +- xdir="." +- else +- xdir="$xdir" +- fi +- baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` +- oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` +- if test ! -f $xdir/$oldobj; then +- $show "(cd $xdir && ${LN_S} $baseobj $oldobj)" +- $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $? +- fi +- done +- + # Use standard objects if they are pic + test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + +@@ -2783,17 +3942,29 @@ + $show "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $run $rm $export_symbols +- eval cmds=\"$export_symbols_cmds\" +- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' ++ cmds=$export_symbols_cmds ++ save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" +- $show "$cmd" +- $run eval "$cmd" || exit $? ++ eval cmd=\"$cmd\" ++ if len=`expr "X$cmd" : ".*"` && ++ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then ++ $show "$cmd" ++ $run eval "$cmd" || exit $? ++ skipped_export=false ++ else ++ # The command line is too long to execute in one step. ++ $show "using reloadable object file for export list..." ++ skipped_export=: ++ # Break out early, otherwise skipped_export may be ++ # set to false by a later but shorter cmd. ++ break ++ fi + done + IFS="$save_ifs" + if test -n "$export_symbols_regex"; then +- $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" +- $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' ++ $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" ++ $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + $show "$mv \"${export_symbols}T\" \"$export_symbols\"" + $run eval '$mv "${export_symbols}T" "$export_symbols"' + fi +@@ -2804,74 +3975,210 @@ + $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' + fi + ++ tmp_deplibs= ++ for test_deplib in $deplibs; do ++ case " $convenience " in ++ *" $test_deplib "*) ;; ++ *) ++ tmp_deplibs="$tmp_deplibs $test_deplib" ++ ;; ++ esac ++ done ++ deplibs="$tmp_deplibs" ++ + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then ++ save_libobjs=$libobjs + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + else + gentop="$output_objdir/${outputname}x" +- $show "${rm}r $gentop" +- $run ${rm}r "$gentop" +- $show "mkdir $gentop" +- $run mkdir "$gentop" +- status=$? +- if test $status -ne 0 && test ! -d "$gentop"; then +- exit $status +- fi + generated="$generated $gentop" + +- for xlib in $convenience; do +- # Extract the objects. +- case $xlib in +- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; +- *) xabs=`pwd`"/$xlib" ;; +- esac +- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` +- xdir="$gentop/$xlib" ++ func_extract_archives $gentop $convenience ++ libobjs="$libobjs $func_extract_archives_result" ++ fi ++ fi ++ ++ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then ++ eval flag=\"$thread_safe_flag_spec\" ++ linker_flags="$linker_flags $flag" ++ fi ++ ++ # Make a backup of the uninstalled library when relinking ++ if test "$mode" = relink; then ++ $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? ++ fi ++ ++ # Do each of the archive commands. ++ if test "$module" = yes && test -n "$module_cmds" ; then ++ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then ++ eval test_cmds=\"$module_expsym_cmds\" ++ cmds=$module_expsym_cmds ++ else ++ eval test_cmds=\"$module_cmds\" ++ cmds=$module_cmds ++ fi ++ else ++ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then ++ eval test_cmds=\"$archive_expsym_cmds\" ++ cmds=$archive_expsym_cmds ++ else ++ eval test_cmds=\"$archive_cmds\" ++ cmds=$archive_cmds ++ fi ++ fi ++ ++ if test "X$skipped_export" != "X:" && ++ len=`expr "X$test_cmds" : ".*" 2>/dev/null` && ++ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then ++ : ++ else ++ # The command line is too long to link in one step, link piecewise. ++ $echo "creating reloadable object files..." ++ ++ # Save the value of $output and $libobjs because we want to ++ # use them later. If we have whole_archive_flag_spec, we ++ # want to use save_libobjs as it was before ++ # whole_archive_flag_spec was expanded, because we can't ++ # assume the linker understands whole_archive_flag_spec. ++ # This may have to be revisited, in case too many ++ # convenience libraries get linked in and end up exceeding ++ # the spec. ++ if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then ++ save_libobjs=$libobjs ++ fi ++ save_output=$output ++ output_la=`$echo "X$output" | $Xsed -e "$basename"` ++ ++ # Clear the reloadable object creation command queue and ++ # initialize k to one. ++ test_cmds= ++ concat_cmds= ++ objlist= ++ delfiles= ++ last_robj= ++ k=1 ++ output=$output_objdir/$output_la-${k}.$objext ++ # Loop over the list of objects to be linked. ++ for obj in $save_libobjs ++ do ++ eval test_cmds=\"$reload_cmds $objlist $last_robj\" ++ if test "X$objlist" = X || ++ { len=`expr "X$test_cmds" : ".*" 2>/dev/null` && ++ test "$len" -le "$max_cmd_len"; }; then ++ objlist="$objlist $obj" ++ else ++ # The command $test_cmds is almost too long, add a ++ # command to the queue. ++ if test "$k" -eq 1 ; then ++ # The first file doesn't have a previous command to add. ++ eval concat_cmds=\"$reload_cmds $objlist $last_robj\" ++ else ++ # All subsequent reloadable object files will link in ++ # the last one created. ++ eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" ++ fi ++ last_robj=$output_objdir/$output_la-${k}.$objext ++ k=`expr $k + 1` ++ output=$output_objdir/$output_la-${k}.$objext ++ objlist=$obj ++ len=1 ++ fi ++ done ++ # Handle the remaining objects by creating one last ++ # reloadable object file. All subsequent reloadable object ++ # files will link in the last one created. ++ test -z "$concat_cmds" || concat_cmds=$concat_cmds~ ++ eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" ++ ++ if ${skipped_export-false}; then ++ $show "generating symbol list for \`$libname.la'" ++ export_symbols="$output_objdir/$libname.exp" ++ $run $rm $export_symbols ++ libobjs=$output ++ # Append the command to create the export file. ++ eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" ++ fi ++ ++ # Set up a command to remove the reloadable object files ++ # after they are used. ++ i=0 ++ while test "$i" -lt "$k" ++ do ++ i=`expr $i + 1` ++ delfiles="$delfiles $output_objdir/$output_la-${i}.$objext" ++ done ++ ++ $echo "creating a temporary reloadable object file: $output" + +- $show "${rm}r $xdir" +- $run ${rm}r "$xdir" +- $show "mkdir $xdir" +- $run mkdir "$xdir" +- status=$? +- if test $status -ne 0 && test ! -d "$xdir"; then +- exit $status +- fi +- $show "(cd $xdir && $AR x $xabs)" +- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? ++ # Loop through the commands generated above and execute them. ++ save_ifs="$IFS"; IFS='~' ++ for cmd in $concat_cmds; do ++ IFS="$save_ifs" ++ $show "$cmd" ++ $run eval "$cmd" || exit $? ++ done ++ IFS="$save_ifs" + +- libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` +- done +- fi +- fi ++ libobjs=$output ++ # Restore the value of output. ++ output=$save_output + +- if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then +- eval flag=\"$thread_safe_flag_spec\" +- linker_flags="$linker_flags $flag" +- fi ++ if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then ++ eval libobjs=\"\$libobjs $whole_archive_flag_spec\" ++ fi ++ # Expand the library linking commands again to reset the ++ # value of $libobjs for piecewise linking. + +- # Make a backup of the uninstalled library when relinking +- if test "$mode" = relink; then +- $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? +- fi ++ # Do each of the archive commands. ++ if test "$module" = yes && test -n "$module_cmds" ; then ++ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then ++ cmds=$module_expsym_cmds ++ else ++ cmds=$module_cmds ++ fi ++ else ++ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then ++ cmds=$archive_expsym_cmds ++ else ++ cmds=$archive_cmds ++ fi ++ fi + +- # Do each of the archive commands. +- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then +- eval cmds=\"$archive_expsym_cmds\" +- else +- eval cmds=\"$archive_cmds\" ++ # Append the command to remove the reloadable object files ++ # to the just-reset $cmds. ++ eval cmds=\"\$cmds~\$rm $delfiles\" + fi +- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' ++ save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" ++ eval cmd=\"$cmd\" + $show "$cmd" +- $run eval "$cmd" || exit $? ++ $run eval "$cmd" || { ++ lt_exit=$? ++ ++ # Restore the uninstalled library and exit ++ if test "$mode" = relink; then ++ $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' ++ fi ++ ++ exit $lt_exit ++ } + done + IFS="$save_ifs" + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? +- exit 0 ++ ++ if test -n "$convenience"; then ++ if test -z "$whole_archive_flag_spec"; then ++ $show "${rm}r $gentop" ++ $run ${rm}r "$gentop" ++ fi ++ fi ++ ++ exit $EXIT_SUCCESS + fi + + # Create links to the real library. +@@ -2919,7 +4226,7 @@ + *.lo) + if test -n "$objs$old_deplibs"; then + $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + libobj="$output" + obj=`$echo "X$output" | $Xsed -e "$lo2o"` +@@ -2948,38 +4255,10 @@ + eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" + else + gentop="$output_objdir/${obj}x" +- $show "${rm}r $gentop" +- $run ${rm}r "$gentop" +- $show "mkdir $gentop" +- $run mkdir "$gentop" +- status=$? +- if test $status -ne 0 && test ! -d "$gentop"; then +- exit $status +- fi + generated="$generated $gentop" + +- for xlib in $convenience; do +- # Extract the objects. +- case $xlib in +- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; +- *) xabs=`pwd`"/$xlib" ;; +- esac +- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` +- xdir="$gentop/$xlib" +- +- $show "${rm}r $xdir" +- $run ${rm}r "$xdir" +- $show "mkdir $xdir" +- $run mkdir "$xdir" +- status=$? +- if test $status -ne 0 && test ! -d "$xdir"; then +- exit $status +- fi +- $show "(cd $xdir && $AR x $xabs)" +- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? +- +- reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` +- done ++ func_extract_archives $gentop $convenience ++ reload_conv_objs="$reload_objs $func_extract_archives_result" + fi + fi + +@@ -2987,10 +4266,11 @@ + reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + + output="$obj" +- eval cmds=\"$reload_cmds\" +- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' ++ cmds=$reload_cmds ++ save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" ++ eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done +@@ -3003,7 +4283,7 @@ + $run ${rm}r $gentop + fi + +- exit 0 ++ exit $EXIT_SUCCESS + fi + + if test "$build_libtool_libs" != yes; then +@@ -3014,37 +4294,24 @@ + + # Create an invalid libtool object if no PIC, so that we don't + # accidentally link it into a program. +- $show "echo timestamp > $libobj" +- $run eval "echo timestamp > $libobj" || exit $? +- exit 0 ++ # $show "echo timestamp > $libobj" ++ # $run eval "echo timestamp > $libobj" || exit $? ++ exit $EXIT_SUCCESS + fi + + if test -n "$pic_flag" || test "$pic_mode" != default; then + # Only do commands if we really have different PIC objects. + reload_objs="$libobjs $reload_conv_objs" + output="$libobj" +- eval cmds=\"$reload_cmds\" +- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' ++ cmds=$reload_cmds ++ save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" ++ eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" +- else +- # Just create a symlink. +- $show $rm $libobj +- $run $rm $libobj +- xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$xdir" = "X$libobj"; then +- xdir="." +- else +- xdir="$xdir" +- fi +- baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` +- oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` +- $show "(cd $xdir && $LN_S $oldobj $baseobj)" +- $run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $? + fi + + if test -n "$gentop"; then +@@ -3052,12 +4319,12 @@ + $run ${rm}r $gentop + fi + +- exit 0 ++ exit $EXIT_SUCCESS + ;; + + prog) + case $host in +- *cygwin*) output=`echo $output | sed -e 's,.exe$,,;s,$,.exe,'` ;; ++ *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; + esac + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 +@@ -3082,6 +4349,45 @@ + ;; + esac + ++ case $host in ++ *darwin*) ++ # Don't allow lazy linking, it breaks C++ global constructors ++ if test "$tagname" = CXX ; then ++ compile_command="$compile_command ${wl}-bind_at_load" ++ finalize_command="$finalize_command ${wl}-bind_at_load" ++ fi ++ ;; ++ esac ++ ++ ++ # move library search paths that coincide with paths to not yet ++ # installed libraries to the beginning of the library search list ++ new_libs= ++ for path in $notinst_path; do ++ case " $new_libs " in ++ *" -L$path/$objdir "*) ;; ++ *) ++ case " $compile_deplibs " in ++ *" -L$path/$objdir "*) ++ new_libs="$new_libs -L$path/$objdir" ;; ++ esac ++ ;; ++ esac ++ done ++ for deplib in $compile_deplibs; do ++ case $deplib in ++ -L*) ++ case " $new_libs " in ++ *" $deplib "*) ;; ++ *) new_libs="$new_libs $deplib" ;; ++ esac ++ ;; ++ *) new_libs="$new_libs $deplib" ;; ++ esac ++ done ++ compile_deplibs="$new_libs" ++ ++ + compile_command="$compile_command $compile_deplibs" + finalize_command="$finalize_command $finalize_deplibs" + +@@ -3126,10 +4432,15 @@ + fi + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) ++ testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$libdir:"*) ;; + *) dllsearchpath="$dllsearchpath:$libdir";; + esac ++ case :$dllsearchpath: in ++ *":$testbindir:"*) ;; ++ *) dllsearchpath="$dllsearchpath:$testbindir";; ++ esac + ;; + esac + done +@@ -3232,31 +4543,43 @@ + done + + if test -n "$exclude_expsyms"; then +- $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' ++ $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + $run eval '$mv "$nlist"T "$nlist"' + fi + + if test -n "$export_symbols_regex"; then +- $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T' ++ $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' + $run eval '$mv "$nlist"T "$nlist"' + fi + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then +- export_symbols="$output_objdir/$output.exp" ++ export_symbols="$output_objdir/$outputname.exp" + $run $rm $export_symbols +- $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' ++ $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' ++ case $host in ++ *cygwin* | *mingw* ) ++ $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' ++ $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' ++ ;; ++ esac + else +- $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"' +- $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T' ++ $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' ++ $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' + $run eval 'mv "$nlist"T "$nlist"' ++ case $host in ++ *cygwin* | *mingw* ) ++ $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' ++ $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' ++ ;; ++ esac + fi + fi + + for arg in $dlprefiles; do + $show "extracting global C symbols from \`$arg'" +- name=`echo "$arg" | sed -e 's%^.*/%%'` +- $run eval 'echo ": $name " >> "$nlist"' ++ name=`$echo "$arg" | ${SED} -e 's%^.*/%%'` ++ $run eval '$echo ": $name " >> "$nlist"' + $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" + done + +@@ -3265,12 +4588,18 @@ + test -f "$nlist" || : > "$nlist" + + if test -n "$exclude_expsyms"; then +- egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T ++ $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $mv "$nlist"T "$nlist" + fi + + # Try sorting and uniquifying the output. +- if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then ++ if grep -v "^: " < "$nlist" | ++ if sort -k 3 /dev/null 2>&1; then ++ sort -k 3 ++ else ++ sort +2 ++ fi | ++ uniq > "$nlist"S; then + : + else + grep -v "^: " < "$nlist" > "$nlist"S +@@ -3279,7 +4608,7 @@ + if test -f "$nlist"S; then + eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' + else +- echo '/* NONE */' >> "$output_objdir/$dlsyms" ++ $echo '/* NONE */' >> "$output_objdir/$dlsyms" + fi + + $echo >> "$output_objdir/$dlsyms" "\ +@@ -3287,27 +4616,44 @@ + #undef lt_preloaded_symbols + + #if defined (__STDC__) && __STDC__ +-# define lt_ptr_t void * ++# define lt_ptr void * + #else +-# define lt_ptr_t char * ++# define lt_ptr char * + # define const + #endif + + /* The mapping between symbol names and symbols. */ ++" ++ ++ case $host in ++ *cygwin* | *mingw* ) ++ $echo >> "$output_objdir/$dlsyms" "\ ++/* DATA imports from DLLs on WIN32 can't be const, because ++ runtime relocations are performed -- see ld's documentation ++ on pseudo-relocs */ ++struct { ++" ++ ;; ++ * ) ++ $echo >> "$output_objdir/$dlsyms" "\ + const struct { ++" ++ ;; ++ esac ++ ++ ++ $echo >> "$output_objdir/$dlsyms" "\ + const char *name; +- lt_ptr_t address; ++ lt_ptr address; + } + lt_preloaded_symbols[] = + {\ + " + +- sed -n -e 's/^: \([^ ]*\) $/ {\"\1\", (lt_ptr_t) 0},/p' \ +- -e 's/^. \([^ ]*\) \([^ ]*\)$/ {"\2", (lt_ptr_t) \&\2},/p' \ +- < "$nlist" >> "$output_objdir/$dlsyms" ++ eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" + + $echo >> "$output_objdir/$dlsyms" "\ +- {0, (lt_ptr_t) 0} ++ {0, (lt_ptr) 0} + }; + + /* This works around a problem in FreeBSD linker */ +@@ -3333,30 +4679,43 @@ + *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + case "$compile_command " in + *" -static "*) ;; +- *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";; ++ *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";; + esac;; + *-*-hpux*) + case "$compile_command " in + *" -static "*) ;; +- *) pic_flag_for_symtable=" $pic_flag -DPIC";; ++ *) pic_flag_for_symtable=" $pic_flag";; + esac + esac + + # Now compile the dynamic symbol file. +- $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" +- $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? ++ $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" ++ $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? + + # Clean up the generated files. + $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" + $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" + + # Transform the symbol file into the correct name. +- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` +- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` ++ case $host in ++ *cygwin* | *mingw* ) ++ if test -f "$output_objdir/${outputname}.def" ; then ++ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"` ++ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"` ++ else ++ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` ++ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` ++ fi ++ ;; ++ * ) ++ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` ++ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` ++ ;; ++ esac + ;; + *) + $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + ;; + esac + else +@@ -3369,7 +4728,7 @@ + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` + fi + +- if test $need_relink = no || test "$build_libtool_libs" != yes; then ++ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then + # Replace the output file specification. + compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + link_command="$compile_command$compile_rpath" +@@ -3377,7 +4736,7 @@ + # We have no uninstalled library dependencies, so finalize right now. + $show "$link_command" + $run eval "$link_command" +- status=$? ++ exit_status=$? + + # Delete the generated files. + if test -n "$dlsyms"; then +@@ -3385,7 +4744,7 @@ + $run $rm "$output_objdir/${outputname}S.${objext}" + fi + +- exit $status ++ exit $exit_status + fi + + if test -n "$shlibpath_var"; then +@@ -3444,7 +4803,7 @@ + # Link the executable and exit + $show "$link_command" + $run eval "$link_command" || exit $? +- exit 0 ++ exit $EXIT_SUCCESS + fi + + if test "$hardcode_action" = relink; then +@@ -3494,15 +4853,15 @@ + relink_command="$var=\"$var_value\"; export $var; $relink_command" + fi + done +- relink_command="cd `pwd`; $relink_command" ++ relink_command="(cd `pwd`; $relink_command)" + relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` + fi + + # Quote $echo for shipping. +- if test "X$echo" = "X$SHELL $0 --fallback-echo"; then +- case $0 in +- [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";; +- *) qecho="$SHELL `pwd`/$0 --fallback-echo";; ++ if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then ++ case $progpath in ++ [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; ++ *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; + esac + qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` + else +@@ -3514,15 +4873,376 @@ + # win32 will think the script is a binary if it has + # a .exe suffix, so we strip it off here. + case $output in +- *.exe) output=`echo $output|sed 's,.exe$,,'` ;; ++ *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;; + esac + # test for cygwin because mv fails w/o .exe extensions + case $host in +- *cygwin*) exeext=.exe ;; ++ *cygwin*) ++ exeext=.exe ++ outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;; + *) exeext= ;; + esac +- $rm $output +- trap "$rm $output; exit 1" 1 2 15 ++ case $host in ++ *cygwin* | *mingw* ) ++ output_name=`basename $output` ++ output_path=`dirname $output` ++ cwrappersource="$output_path/$objdir/lt-$output_name.c" ++ cwrapper="$output_path/$output_name.exe" ++ $rm $cwrappersource $cwrapper ++ trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 ++ ++ cat > $cwrappersource <> $cwrappersource<<"EOF" ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#if defined(PATH_MAX) ++# define LT_PATHMAX PATH_MAX ++#elif defined(MAXPATHLEN) ++# define LT_PATHMAX MAXPATHLEN ++#else ++# define LT_PATHMAX 1024 ++#endif ++ ++#ifndef DIR_SEPARATOR ++# define DIR_SEPARATOR '/' ++# define PATH_SEPARATOR ':' ++#endif ++ ++#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ ++ defined (__OS2__) ++# define HAVE_DOS_BASED_FILE_SYSTEM ++# ifndef DIR_SEPARATOR_2 ++# define DIR_SEPARATOR_2 '\\' ++# endif ++# ifndef PATH_SEPARATOR_2 ++# define PATH_SEPARATOR_2 ';' ++# endif ++#endif ++ ++#ifndef DIR_SEPARATOR_2 ++# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) ++#else /* DIR_SEPARATOR_2 */ ++# define IS_DIR_SEPARATOR(ch) \ ++ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) ++#endif /* DIR_SEPARATOR_2 */ ++ ++#ifndef PATH_SEPARATOR_2 ++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) ++#else /* PATH_SEPARATOR_2 */ ++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) ++#endif /* PATH_SEPARATOR_2 */ ++ ++#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) ++#define XFREE(stale) do { \ ++ if (stale) { free ((void *) stale); stale = 0; } \ ++} while (0) ++ ++/* -DDEBUG is fairly common in CFLAGS. */ ++#undef DEBUG ++#if defined DEBUGWRAPPER ++# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__) ++#else ++# define DEBUG(format, ...) ++#endif ++ ++const char *program_name = NULL; ++ ++void * xmalloc (size_t num); ++char * xstrdup (const char *string); ++const char * base_name (const char *name); ++char * find_executable(const char *wrapper); ++int check_executable(const char *path); ++char * strendzap(char *str, const char *pat); ++void lt_fatal (const char *message, ...); ++ ++int ++main (int argc, char *argv[]) ++{ ++ char **newargz; ++ int i; ++ ++ program_name = (char *) xstrdup (base_name (argv[0])); ++ DEBUG("(main) argv[0] : %s\n",argv[0]); ++ DEBUG("(main) program_name : %s\n",program_name); ++ newargz = XMALLOC(char *, argc+2); ++EOF ++ ++ cat >> $cwrappersource <> $cwrappersource <<"EOF" ++ newargz[1] = find_executable(argv[0]); ++ if (newargz[1] == NULL) ++ lt_fatal("Couldn't find %s", argv[0]); ++ DEBUG("(main) found exe at : %s\n",newargz[1]); ++ /* we know the script has the same name, without the .exe */ ++ /* so make sure newargz[1] doesn't end in .exe */ ++ strendzap(newargz[1],".exe"); ++ for (i = 1; i < argc; i++) ++ newargz[i+1] = xstrdup(argv[i]); ++ newargz[argc+1] = NULL; ++ ++ for (i=0; i> $cwrappersource <> $cwrappersource <> $cwrappersource <<"EOF" ++ return 127; ++} ++ ++void * ++xmalloc (size_t num) ++{ ++ void * p = (void *) malloc (num); ++ if (!p) ++ lt_fatal ("Memory exhausted"); ++ ++ return p; ++} ++ ++char * ++xstrdup (const char *string) ++{ ++ return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL ++; ++} ++ ++const char * ++base_name (const char *name) ++{ ++ const char *base; ++ ++#if defined (HAVE_DOS_BASED_FILE_SYSTEM) ++ /* Skip over the disk name in MSDOS pathnames. */ ++ if (isalpha ((unsigned char)name[0]) && name[1] == ':') ++ name += 2; ++#endif ++ ++ for (base = name; *name; name++) ++ if (IS_DIR_SEPARATOR (*name)) ++ base = name + 1; ++ return base; ++} ++ ++int ++check_executable(const char * path) ++{ ++ struct stat st; ++ ++ DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!"); ++ if ((!path) || (!*path)) ++ return 0; ++ ++ if ((stat (path, &st) >= 0) && ++ ( ++ /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */ ++#if defined (S_IXOTH) ++ ((st.st_mode & S_IXOTH) == S_IXOTH) || ++#endif ++#if defined (S_IXGRP) ++ ((st.st_mode & S_IXGRP) == S_IXGRP) || ++#endif ++ ((st.st_mode & S_IXUSR) == S_IXUSR)) ++ ) ++ return 1; ++ else ++ return 0; ++} ++ ++/* Searches for the full path of the wrapper. Returns ++ newly allocated full path name if found, NULL otherwise */ ++char * ++find_executable (const char* wrapper) ++{ ++ int has_slash = 0; ++ const char* p; ++ const char* p_next; ++ /* static buffer for getcwd */ ++ char tmp[LT_PATHMAX + 1]; ++ int tmp_len; ++ char* concat_name; ++ ++ DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"); ++ ++ if ((wrapper == NULL) || (*wrapper == '\0')) ++ return NULL; ++ ++ /* Absolute path? */ ++#if defined (HAVE_DOS_BASED_FILE_SYSTEM) ++ if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':') ++ { ++ concat_name = xstrdup (wrapper); ++ if (check_executable(concat_name)) ++ return concat_name; ++ XFREE(concat_name); ++ } ++ else ++ { ++#endif ++ if (IS_DIR_SEPARATOR (wrapper[0])) ++ { ++ concat_name = xstrdup (wrapper); ++ if (check_executable(concat_name)) ++ return concat_name; ++ XFREE(concat_name); ++ } ++#if defined (HAVE_DOS_BASED_FILE_SYSTEM) ++ } ++#endif ++ ++ for (p = wrapper; *p; p++) ++ if (*p == '/') ++ { ++ has_slash = 1; ++ break; ++ } ++ if (!has_slash) ++ { ++ /* no slashes; search PATH */ ++ const char* path = getenv ("PATH"); ++ if (path != NULL) ++ { ++ for (p = path; *p; p = p_next) ++ { ++ const char* q; ++ size_t p_len; ++ for (q = p; *q; q++) ++ if (IS_PATH_SEPARATOR(*q)) ++ break; ++ p_len = q - p; ++ p_next = (*q == '\0' ? q : q + 1); ++ if (p_len == 0) ++ { ++ /* empty path: current directory */ ++ if (getcwd (tmp, LT_PATHMAX) == NULL) ++ lt_fatal ("getcwd failed"); ++ tmp_len = strlen(tmp); ++ concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); ++ memcpy (concat_name, tmp, tmp_len); ++ concat_name[tmp_len] = '/'; ++ strcpy (concat_name + tmp_len + 1, wrapper); ++ } ++ else ++ { ++ concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1); ++ memcpy (concat_name, p, p_len); ++ concat_name[p_len] = '/'; ++ strcpy (concat_name + p_len + 1, wrapper); ++ } ++ if (check_executable(concat_name)) ++ return concat_name; ++ XFREE(concat_name); ++ } ++ } ++ /* not found in PATH; assume curdir */ ++ } ++ /* Relative path | not found in path: prepend cwd */ ++ if (getcwd (tmp, LT_PATHMAX) == NULL) ++ lt_fatal ("getcwd failed"); ++ tmp_len = strlen(tmp); ++ concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); ++ memcpy (concat_name, tmp, tmp_len); ++ concat_name[tmp_len] = '/'; ++ strcpy (concat_name + tmp_len + 1, wrapper); ++ ++ if (check_executable(concat_name)) ++ return concat_name; ++ XFREE(concat_name); ++ return NULL; ++} ++ ++char * ++strendzap(char *str, const char *pat) ++{ ++ size_t len, patlen; ++ ++ assert(str != NULL); ++ assert(pat != NULL); ++ ++ len = strlen(str); ++ patlen = strlen(pat); ++ ++ if (patlen <= len) ++ { ++ str += len - patlen; ++ if (strcmp(str, pat) == 0) ++ *str = '\0'; ++ } ++ return str; ++} ++ ++static void ++lt_error_core (int exit_status, const char * mode, ++ const char * message, va_list ap) ++{ ++ fprintf (stderr, "%s: %s: ", program_name, mode); ++ vfprintf (stderr, message, ap); ++ fprintf (stderr, ".\n"); ++ ++ if (exit_status >= 0) ++ exit (exit_status); ++} ++ ++void ++lt_fatal (const char *message, ...) ++{ ++ va_list ap; ++ va_start (ap, message); ++ lt_error_core (EXIT_FAILURE, "FATAL", message, ap); ++ va_end (ap); ++} ++EOF ++ # we should really use a build-platform specific compiler ++ # here, but OTOH, the wrappers (shell script and this C one) ++ # are only useful if you want to execute the "real" binary. ++ # Since the "real" binary is built for $host, then this ++ # wrapper might as well be built for $host, too. ++ $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource ++ ;; ++ esac ++ $rm $output ++ trap "$rm $output; exit $EXIT_FAILURE" 1 2 15 + + $echo > $output "\ + #! $SHELL +@@ -3538,12 +5258,12 @@ + + # Sed substitution that helps us do robust quoting. It backslashifies + # metacharacters that are still active within double-quoted strings. +-Xsed='sed -e 1s/^X//' ++Xsed='${SED} -e 1s/^X//' + sed_quote_subst='$sed_quote_subst' + + # The HP-UX ksh and POSIX shell print the target directory to stdout + # if CDPATH is set. +-if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + relink_command=\"$relink_command\" + +@@ -3576,7 +5296,7 @@ + test \"x\$thisdir\" = \"x\$file\" && thisdir=. + + # Follow symbolic links until we get to the real thisdir. +- file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\` ++ file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` + while test -n \"\$file\"; do + destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` + +@@ -3589,7 +5309,7 @@ + fi + + file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` +- file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\` ++ file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` + done + + # Try to get the absolute directory name. +@@ -3598,12 +5318,12 @@ + " + + if test "$fast_install" = yes; then +- echo >> $output "\ ++ $echo >> $output "\ + program=lt-'$outputname'$exeext + progdir=\"\$thisdir/$objdir\" + + if test ! -f \"\$progdir/\$program\" || \\ +- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\ ++ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ + test \"X\$file\" != \"X\$progdir/\$program\"; }; then + + file=\"\$\$-\$program\" +@@ -3614,14 +5334,15 @@ + $rm \"\$progdir/\$file\" + fi" + +- echo >> $output "\ ++ $echo >> $output "\ + + # relink executable if necessary + if test -n \"\$relink_command\"; then +- if (eval \$relink_command); then : ++ if relink_command_output=\`eval \$relink_command 2>&1\`; then : + else ++ $echo \"\$relink_command_output\" >&2 + $rm \"\$progdir/\$file\" +- exit 1 ++ exit $EXIT_FAILURE + fi + fi + +@@ -3631,13 +5352,13 @@ + $rm \"\$progdir/\$file\" + fi" + else +- echo >> $output "\ ++ $echo >> $output "\ + program='$outputname' + progdir=\"\$thisdir/$objdir\" + " + fi + +- echo >> $output "\ ++ $echo >> $output "\ + + if test -f \"\$progdir/\$program\"; then" + +@@ -3668,47 +5389,35 @@ + # Run the actual program with our arguments. + " + case $host in +- # win32 systems need to use the prog path for dll +- # lookup to work +- *-*-cygwin* | *-*-pw32*) +- $echo >> $output "\ +- exec \$progdir/\$program \${1+\"\$@\"} +-" +- ;; +- + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2*) + $echo >> $output "\ +- exec \$progdir\\\\\$program \${1+\"\$@\"} ++ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} + " + ;; + + *) + $echo >> $output "\ +- # Export the path to the program. +- PATH=\"\$progdir:\$PATH\" +- export PATH +- +- exec \$program \${1+\"\$@\"} ++ exec \"\$progdir/\$program\" \${1+\"\$@\"} + " + ;; + esac + $echo >> $output "\ + \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" +- exit 1 ++ exit $EXIT_FAILURE + fi + else + # The program doesn't exist. +- \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 ++ \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 + \$echo \"This script is just a wrapper for \$program.\" 1>&2 +- echo \"See the $PACKAGE documentation for more information.\" 1>&2 +- exit 1 ++ $echo \"See the $PACKAGE documentation for more information.\" 1>&2 ++ exit $EXIT_FAILURE + fi + fi\ + " + chmod +x $output + fi +- exit 0 ++ exit $EXIT_SUCCESS + ;; + esac + +@@ -3724,74 +5433,130 @@ + oldobjs="$libobjs_save" + build_libtool_libs=no + else +- oldobjs="$objs$old_deplibs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP` ++ oldobjs="$old_deplibs $non_pic_objects" + fi + addlibs="$old_convenience" + fi + + if test -n "$addlibs"; then + gentop="$output_objdir/${outputname}x" +- $show "${rm}r $gentop" +- $run ${rm}r "$gentop" +- $show "mkdir $gentop" +- $run mkdir "$gentop" +- status=$? +- if test $status -ne 0 && test ! -d "$gentop"; then +- exit $status +- fi + generated="$generated $gentop" + +- # Add in members from convenience archives. +- for xlib in $addlibs; do +- # Extract the objects. +- case $xlib in +- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; +- *) xabs=`pwd`"/$xlib" ;; +- esac +- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` +- xdir="$gentop/$xlib" +- +- $show "${rm}r $xdir" +- $run ${rm}r "$xdir" +- $show "mkdir $xdir" +- $run mkdir "$xdir" +- status=$? +- if test $status -ne 0 && test ! -d "$xdir"; then +- exit $status +- fi +- $show "(cd $xdir && $AR x $xabs)" +- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? +- +- oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP` +- done ++ func_extract_archives $gentop $addlibs ++ oldobjs="$oldobjs $func_extract_archives_result" + fi + + # Do each command in the archive commands. + if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then +- eval cmds=\"$old_archive_from_new_cmds\" ++ cmds=$old_archive_from_new_cmds + else +- # Ensure that we have .o objects in place in case we decided +- # not to build a shared library, and have fallen back to building +- # static libs even though --disable-static was passed! +- for oldobj in $oldobjs; do +- if test ! -f $oldobj; then +- xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$xdir" = "X$oldobj"; then +- xdir="." +- else +- xdir="$xdir" ++ # POSIX demands no paths to be encoded in archives. We have ++ # to avoid creating archives with duplicate basenames if we ++ # might have to extract them afterwards, e.g., when creating a ++ # static archive out of a convenience library, or when linking ++ # the entirety of a libtool archive into another (currently ++ # not supported by libtool). ++ if (for obj in $oldobjs ++ do ++ $echo "X$obj" | $Xsed -e 's%^.*/%%' ++ done | sort | sort -uc >/dev/null 2>&1); then ++ : ++ else ++ $echo "copying selected object files to avoid basename conflicts..." ++ ++ if test -z "$gentop"; then ++ gentop="$output_objdir/${outputname}x" ++ generated="$generated $gentop" ++ ++ $show "${rm}r $gentop" ++ $run ${rm}r "$gentop" ++ $show "$mkdir $gentop" ++ $run $mkdir "$gentop" ++ exit_status=$? ++ if test "$exit_status" -ne 0 && test ! -d "$gentop"; then ++ exit $exit_status + fi +- baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'` +- obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"` +- $show "(cd $xdir && ${LN_S} $obj $baseobj)" +- $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $? + fi +- done ++ ++ save_oldobjs=$oldobjs ++ oldobjs= ++ counter=1 ++ for obj in $save_oldobjs ++ do ++ objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` ++ case " $oldobjs " in ++ " ") oldobjs=$obj ;; ++ *[\ /]"$objbase "*) ++ while :; do ++ # Make sure we don't pick an alternate name that also ++ # overlaps. ++ newobj=lt$counter-$objbase ++ counter=`expr $counter + 1` ++ case " $oldobjs " in ++ *[\ /]"$newobj "*) ;; ++ *) if test ! -f "$gentop/$newobj"; then break; fi ;; ++ esac ++ done ++ $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" ++ $run ln "$obj" "$gentop/$newobj" || ++ $run cp "$obj" "$gentop/$newobj" ++ oldobjs="$oldobjs $gentop/$newobj" ++ ;; ++ *) oldobjs="$oldobjs $obj" ;; ++ esac ++ done ++ fi + + eval cmds=\"$old_archive_cmds\" ++ ++ if len=`expr "X$cmds" : ".*"` && ++ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then ++ cmds=$old_archive_cmds ++ else ++ # the command line is too long to link in one step, link in parts ++ $echo "using piecewise archive linking..." ++ save_RANLIB=$RANLIB ++ RANLIB=: ++ objlist= ++ concat_cmds= ++ save_oldobjs=$oldobjs ++ ++ # Is there a better way of finding the last object in the list? ++ for obj in $save_oldobjs ++ do ++ last_oldobj=$obj ++ done ++ for obj in $save_oldobjs ++ do ++ oldobjs="$objlist $obj" ++ objlist="$objlist $obj" ++ eval test_cmds=\"$old_archive_cmds\" ++ if len=`expr "X$test_cmds" : ".*" 2>/dev/null` && ++ test "$len" -le "$max_cmd_len"; then ++ : ++ else ++ # the above command should be used before it gets too long ++ oldobjs=$objlist ++ if test "$obj" = "$last_oldobj" ; then ++ RANLIB=$save_RANLIB ++ fi ++ test -z "$concat_cmds" || concat_cmds=$concat_cmds~ ++ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" ++ objlist= ++ fi ++ done ++ RANLIB=$save_RANLIB ++ oldobjs=$objlist ++ if test "X$oldobjs" = "X" ; then ++ eval cmds=\"\$concat_cmds\" ++ else ++ eval cmds=\"\$concat_cmds~\$old_archive_cmds\" ++ fi ++ fi + fi +- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' ++ save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do ++ eval cmd=\"$cmd\" + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? +@@ -3823,8 +5588,12 @@ + fi + done + # Quote the link command for shipping. +- relink_command="cd `pwd`; $SHELL $0 --mode=relink $libtool_args" ++ relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" + relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` ++ if test "$hardcode_automatic" = yes ; then ++ relink_command= ++ fi ++ + + # Only create the output if not a dry run. + if test -z "$run"; then +@@ -3840,10 +5609,10 @@ + case $deplib in + *.la) + name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` +- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` ++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + if test -z "$libdir"; then + $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + newdependency_libs="$newdependency_libs $libdir/$name" + ;; +@@ -3854,10 +5623,10 @@ + newdlfiles= + for lib in $dlfiles; do + name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` +- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib` ++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + if test -z "$libdir"; then + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + newdlfiles="$newdlfiles $libdir/$name" + done +@@ -3865,20 +5634,39 @@ + newdlprefiles= + for lib in $dlprefiles; do + name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` +- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib` ++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + if test -z "$libdir"; then + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + newdlprefiles="$newdlprefiles $libdir/$name" + done + dlprefiles="$newdlprefiles" ++ else ++ newdlfiles= ++ for lib in $dlfiles; do ++ case $lib in ++ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; ++ *) abs=`pwd`"/$lib" ;; ++ esac ++ newdlfiles="$newdlfiles $abs" ++ done ++ dlfiles="$newdlfiles" ++ newdlprefiles= ++ for lib in $dlprefiles; do ++ case $lib in ++ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; ++ *) abs=`pwd`"/$lib" ;; ++ esac ++ newdlprefiles="$newdlprefiles $abs" ++ done ++ dlprefiles="$newdlprefiles" + fi + $rm $output + # place dlname in correct position for cygwin + tdlname=$dlname + case $host,$output,$installed,$module,$dlname in +- *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; ++ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; + esac + $echo > $output "\ + # $outputname - a libtool library file +@@ -3907,13 +5695,16 @@ + # Is this an already installed library? + installed=$installed + ++# Should we warn about portability when linking against -modules? ++shouldnotlink=$module ++ + # Files to dlopen/dlpreopen + dlopen='$dlfiles' + dlpreopen='$dlprefiles' + + # Directory that this library needs to be installed in: + libdir='$install_libdir'" +- if test "$installed" = no && test $need_relink = yes; then ++ if test "$installed" = no && test "$need_relink" = yes; then + $echo >> $output "\ + relink_command=\"$relink_command\"" + fi +@@ -3926,7 +5717,7 @@ + $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? + ;; + esac +- exit 0 ++ exit $EXIT_SUCCESS + ;; + + # libtool install mode +@@ -3937,11 +5728,11 @@ + # install_prog (especially on Windows NT). + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + # Allow the use of GNU shtool's install command. +- $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then ++ $echo "X$nonopt" | grep shtool > /dev/null; then + # Aesthetically quote it. + arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` + case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac +@@ -3950,14 +5741,14 @@ + shift + else + install_prog= +- arg="$nonopt" ++ arg=$nonopt + fi + + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac +@@ -3975,28 +5766,31 @@ + do + if test -n "$dest"; then + files="$files $dest" +- dest="$arg" ++ dest=$arg + continue + fi + + case $arg in + -d) isdir=yes ;; +- -f) prev="-f" ;; +- -g) prev="-g" ;; +- -m) prev="-m" ;; +- -o) prev="-o" ;; ++ -f) ++ case " $install_prog " in ++ *[\\\ /]cp\ *) ;; ++ *) prev=$arg ;; ++ esac ++ ;; ++ -g | -m | -o) prev=$arg ;; + -s) + stripme=" -s" + continue + ;; +- -*) ;; +- ++ -*) ++ ;; + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + prev= + else +- dest="$arg" ++ dest=$arg + continue + fi + ;; +@@ -4005,7 +5799,7 @@ + # Aesthetically quote the argument. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac +@@ -4015,13 +5809,13 @@ + if test -z "$install_prog"; then + $echo "$modename: you must specify an install program" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + + if test -n "$prev"; then + $echo "$modename: the \`$prev' option requires an argument" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + + if test -z "$files"; then +@@ -4031,7 +5825,7 @@ + $echo "$modename: you must specify a destination" 1>&2 + fi + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + + # Strip any trailing slash from the destination. +@@ -4049,10 +5843,10 @@ + + # Not a directory, so check to see that there is only one file specified. + set dummy $files +- if test $# -gt 2; then ++ if test "$#" -gt 2; then + $echo "$modename: \`$dest' is not a directory" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + fi + case $destdir in +@@ -4064,7 +5858,7 @@ + *) + $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + ;; + esac + done +@@ -4089,11 +5883,11 @@ + + *.la) + # Check to see that this really is a libtool archive. +- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : ++ if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + + library_names= +@@ -4124,12 +5918,33 @@ + dir="$dir$objdir" + + if test -n "$relink_command"; then ++ # Determine the prefix the user has applied to our future dir. ++ inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"` ++ ++ # Don't allow the user to place us outside of our expected ++ # location b/c this prevents finding dependent libraries that ++ # are installed to the same prefix. ++ # At present, this check doesn't affect windows .dll's that ++ # are installed into $libdir/../bin (currently, that works fine) ++ # but it's something to keep an eye on. ++ if test "$inst_prefix_dir" = "$destdir"; then ++ $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ ++ if test -n "$inst_prefix_dir"; then ++ # Stick the inst_prefix_dir data into the link command. ++ relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` ++ else ++ relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"` ++ fi ++ + $echo "$modename: warning: relinking \`$file'" 1>&2 + $show "$relink_command" + if $run eval "$relink_command"; then : + else + $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 +- continue ++ exit $EXIT_FAILURE + fi + fi + +@@ -4151,25 +5966,38 @@ + $run eval "$striplib $destdir/$realname" || exit $? + fi + +- if test $# -gt 0; then ++ if test "$#" -gt 0; then + # Delete the old symlinks, and create new ones. ++ # Try `ln -sf' first, because the `ln' binary might depend on ++ # the symlink we replace! Solaris /bin/ln does not understand -f, ++ # so we also need to try rm && ln -s. + for linkname + do + if test "$linkname" != "$realname"; then +- $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" +- $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" ++ $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" ++ $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" + fi + done + fi + + # Do each command in the postinstall commands. + lib="$destdir/$realname" +- eval cmds=\"$postinstall_cmds\" +- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' ++ cmds=$postinstall_cmds ++ save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" ++ eval cmd=\"$cmd\" + $show "$cmd" +- $run eval "$cmd" || exit $? ++ $run eval "$cmd" || { ++ lt_exit=$? ++ ++ # Restore the uninstalled library and exit ++ if test "$mode" = relink; then ++ $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' ++ fi ++ ++ exit $lt_exit ++ } + done + IFS="$save_ifs" + fi +@@ -4207,7 +6035,7 @@ + *) + $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + ;; + esac + +@@ -4225,7 +6053,7 @@ + $show "$install_prog $staticobj $staticdest" + $run eval "$install_prog \$staticobj \$staticdest" || exit $? + fi +- exit 0 ++ exit $EXIT_SUCCESS + ;; + + *) +@@ -4237,21 +6065,47 @@ + destfile="$destdir/$destfile" + fi + ++ # If the file is missing, and there is a .exe on the end, strip it ++ # because it is most likely a libtool script we actually want to ++ # install ++ stripped_ext="" ++ case $file in ++ *.exe) ++ if test ! -f "$file"; then ++ file=`$echo $file|${SED} 's,.exe$,,'` ++ stripped_ext=".exe" ++ fi ++ ;; ++ esac ++ + # Do a test to see if this is really a libtool program. +- if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then ++ case $host in ++ *cygwin*|*mingw*) ++ wrapper=`$echo $file | ${SED} -e 's,.exe$,,'` ++ ;; ++ *) ++ wrapper=$file ++ ;; ++ esac ++ if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then + notinst_deplibs= + relink_command= + ++ # Note that it is not necessary on cygwin/mingw to append a dot to ++ # foo even if both foo and FILE.exe exist: automatic-append-.exe ++ # behavior happens only for exec(3), not for open(2)! Also, sourcing ++ # `FILE.' does not work on cygwin managed mounts. ++ # + # If there is no directory component, then add one. +- case $file in +- */* | *\\*) . $file ;; +- *) . ./$file ;; ++ case $wrapper in ++ */* | *\\*) . ${wrapper} ;; ++ *) . ./${wrapper} ;; + esac + + # Check the variables that should have been set. + if test -z "$notinst_deplibs"; then +- $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2 +- exit 1 ++ $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 ++ exit $EXIT_FAILURE + fi + + finalize=yes +@@ -4273,24 +6127,22 @@ + done + + relink_command= ++ # Note that it is not necessary on cygwin/mingw to append a dot to ++ # foo even if both foo and FILE.exe exist: automatic-append-.exe ++ # behavior happens only for exec(3), not for open(2)! Also, sourcing ++ # `FILE.' does not work on cygwin managed mounts. ++ # + # If there is no directory component, then add one. +- case $file in +- */* | *\\*) . $file ;; +- *) . ./$file ;; ++ case $wrapper in ++ */* | *\\*) . ${wrapper} ;; ++ *) . ./${wrapper} ;; + esac + + outputname= + if test "$fast_install" = no && test -n "$relink_command"; then + if test "$finalize" = yes && test -z "$run"; then +- tmpdir="/tmp" +- test -n "$TMPDIR" && tmpdir="$TMPDIR" +- tmpdir="$tmpdir/libtool-$$" +- if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then : +- else +- $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 +- continue +- fi +- file=`$echo "X$file" | $Xsed -e 's%^.*/%%'` ++ tmpdir=`func_mktempdir` ++ file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'` + outputname="$tmpdir/$file" + # Replace the output file specification. + relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` +@@ -4308,14 +6160,14 @@ + fi + else + # Install the binary that we compiled earlier. +- file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` ++ file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` + fi + fi + + # remove .exe since cygwin /usr/bin/install will append another +- # one anyways ++ # one anyway + case $install_prog,$host in +- /usr/bin/install*,*cygwin*) ++ */usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok +@@ -4324,7 +6176,7 @@ + destfile=$destfile.exe + ;; + *:*.exe) +- destfile=`echo $destfile | sed -e 's,.exe$,,'` ++ destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'` + ;; + esac + ;; +@@ -4345,16 +6197,17 @@ + $show "$install_prog $file $oldlib" + $run eval "$install_prog \$file \$oldlib" || exit $? + +- if test -n "$stripme" && test -n "$striplib"; then ++ if test -n "$stripme" && test -n "$old_striplib"; then + $show "$old_striplib $oldlib" + $run eval "$old_striplib $oldlib" || exit $? + fi + + # Do each command in the postinstall commands. +- eval cmds=\"$old_postinstall_cmds\" +- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' ++ cmds=$old_postinstall_cmds ++ save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" ++ eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done +@@ -4368,11 +6221,10 @@ + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + test -n "$run" && current_libdirs=" -n$current_libdirs" +- exec $SHELL $0 --finish$current_libdirs +- exit 1 ++ exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' ++ else ++ exit $EXIT_SUCCESS + fi +- +- exit 0 + ;; + + # libtool finish mode +@@ -4390,10 +6242,11 @@ + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. +- eval cmds=\"$finish_cmds\" +- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' ++ cmds=$finish_cmds ++ save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" ++ eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || admincmds="$admincmds + $cmd" +@@ -4410,43 +6263,43 @@ + fi + + # Exit here if they wanted silent mode. +- test "$show" = ":" && exit 0 ++ test "$show" = : && exit $EXIT_SUCCESS + +- echo "----------------------------------------------------------------------" +- echo "Libraries have been installed in:" ++ $echo "X----------------------------------------------------------------------" | $Xsed ++ $echo "Libraries have been installed in:" + for libdir in $libdirs; do +- echo " $libdir" ++ $echo " $libdir" + done +- echo +- echo "If you ever happen to want to link against installed libraries" +- echo "in a given directory, LIBDIR, you must either use libtool, and" +- echo "specify the full pathname of the library, or use the \`-LLIBDIR'" +- echo "flag during linking and do at least one of the following:" ++ $echo ++ $echo "If you ever happen to want to link against installed libraries" ++ $echo "in a given directory, LIBDIR, you must either use libtool, and" ++ $echo "specify the full pathname of the library, or use the \`-LLIBDIR'" ++ $echo "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then +- echo " - add LIBDIR to the \`$shlibpath_var' environment variable" +- echo " during execution" ++ $echo " - add LIBDIR to the \`$shlibpath_var' environment variable" ++ $echo " during execution" + fi + if test -n "$runpath_var"; then +- echo " - add LIBDIR to the \`$runpath_var' environment variable" +- echo " during linking" ++ $echo " - add LIBDIR to the \`$runpath_var' environment variable" ++ $echo " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" + +- echo " - use the \`$flag' linker flag" ++ $echo " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then +- echo " - have your system administrator run these commands:$admincmds" ++ $echo " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then +- echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" ++ $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi +- echo +- echo "See any operating system documentation about shared libraries for" +- echo "more information, such as the ld(1) and ld.so(8) manual pages." +- echo "----------------------------------------------------------------------" +- exit 0 ++ $echo ++ $echo "See any operating system documentation about shared libraries for" ++ $echo "more information, such as the ld(1) and ld.so(8) manual pages." ++ $echo "X----------------------------------------------------------------------" | $Xsed ++ exit $EXIT_SUCCESS + ;; + + # libtool execute mode +@@ -4458,7 +6311,7 @@ + if test -z "$cmd"; then + $echo "$modename: you must specify a COMMAND" 1>&2 + $echo "$help" +- exit 1 ++ exit $EXIT_FAILURE + fi + + # Handle -dlopen flags immediately. +@@ -4466,18 +6319,18 @@ + if test ! -f "$file"; then + $echo "$modename: \`$file' is not a file" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + + dir= + case $file in + *.la) + # Check to see that this really is a libtool archive. +- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : ++ if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + + # Read the libtool library. +@@ -4504,7 +6357,7 @@ + dir="$dir/$objdir" + else + $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + ;; + +@@ -4544,7 +6397,7 @@ + -*) ;; + *) + # Do a test to see if this is really a libtool program. +- if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then ++ if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; +@@ -4567,7 +6420,7 @@ + eval "export $shlibpath_var" + fi + +- # Restore saved enviroment variables ++ # Restore saved environment variables + if test "${save_LC_ALL+set}" = set; then + LC_ALL="$save_LC_ALL"; export LC_ALL + fi +@@ -4575,11 +6428,8 @@ + LANG="$save_LANG"; export LANG + fi + +- # Now actually exec the command. +- eval "exec \$cmd$args" +- +- $echo "$modename: cannot exec \$cmd$args" +- exit 1 ++ # Now prepare to actually exec the command. ++ exec_cmd="\$cmd$args" + else + # Display what would be done. + if test -n "$shlibpath_var"; then +@@ -4587,7 +6437,7 @@ + $echo "export $shlibpath_var" + fi + $echo "$cmd$args" +- exit 0 ++ exit $EXIT_SUCCESS + fi + ;; + +@@ -4615,24 +6465,25 @@ + if test -z "$rm"; then + $echo "$modename: you must specify an RM program" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + + rmdirs= + ++ origobjdir="$objdir" + for file in $files; do + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + if test "X$dir" = "X$file"; then + dir=. +- objdir="$objdir" ++ objdir="$origobjdir" + else +- objdir="$dir/$objdir" ++ objdir="$dir/$origobjdir" + fi + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` +- test $mode = uninstall && objdir="$dir" ++ test "$mode" = uninstall && objdir="$dir" + + # Remember objdir for removal later, being careful to avoid duplicates +- if test $mode = clean; then ++ if test "$mode" = clean; then + case " $rmdirs " in + *" $objdir "*) ;; + *) rmdirs="$rmdirs $objdir" ;; +@@ -4641,14 +6492,14 @@ + + # Don't error if the file doesn't exist and rm -f was used. + if (test -L "$file") >/dev/null 2>&1 \ +- || (test -h "$file") >/dev/null 2>&1 \ ++ || (test -h "$file") >/dev/null 2>&1 \ + || test -f "$file"; then +- : ++ : + elif test -d "$file"; then +- exit_status=1 ++ exit_status=1 + continue + elif test "$rmforce" = yes; then +- continue ++ continue + fi + + rmfiles="$file" +@@ -4656,7 +6507,7 @@ + case $name in + *.la) + # Possibly a libtool archive, so verify it. +- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then ++ if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + . $dir/$name + + # Delete the libtool libraries and symlinks. +@@ -4664,18 +6515,27 @@ + rmfiles="$rmfiles $objdir/$n" + done + test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" +- test $mode = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" + +- if test $mode = uninstall; then ++ case "$mode" in ++ clean) ++ case " $library_names " in ++ # " " in the beginning catches empty $dlname ++ *" $dlname "*) ;; ++ *) rmfiles="$rmfiles $objdir/$dlname" ;; ++ esac ++ test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" ++ ;; ++ uninstall) + if test -n "$library_names"; then + # Do each command in the postuninstall commands. +- eval cmds=\"$postuninstall_cmds\" +- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' ++ cmds=$postuninstall_cmds ++ save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" ++ eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" +- if test $? != 0 && test "$rmforce" != yes; then ++ if test "$?" -ne 0 && test "$rmforce" != yes; then + exit_status=1 + fi + done +@@ -4684,40 +6544,72 @@ + + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. +- eval cmds=\"$old_postuninstall_cmds\" +- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' ++ cmds=$old_postuninstall_cmds ++ save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" ++ eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" +- if test $? != 0 && test "$rmforce" != yes; then ++ if test "$?" -ne 0 && test "$rmforce" != yes; then + exit_status=1 + fi + done + IFS="$save_ifs" + fi + # FIXME: should reinstall the best remaining shared library. +- fi ++ ;; ++ esac + fi + ;; + + *.lo) +- if test "$build_old_libs" = yes; then +- oldobj=`$echo "X$name" | $Xsed -e "$lo2o"` +- rmfiles="$rmfiles $dir/$oldobj" ++ # Possibly a libtool object, so verify it. ++ if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then ++ ++ # Read the .lo file ++ . $dir/$name ++ ++ # Add PIC object to the list of files to remove. ++ if test -n "$pic_object" \ ++ && test "$pic_object" != none; then ++ rmfiles="$rmfiles $dir/$pic_object" ++ fi ++ ++ # Add non-PIC object to the list of files to remove. ++ if test -n "$non_pic_object" \ ++ && test "$non_pic_object" != none; then ++ rmfiles="$rmfiles $dir/$non_pic_object" ++ fi + fi + ;; + + *) +- # Do a test to see if this is a libtool program. +- if test $mode = clean && +- (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then +- relink_command= +- . $dir/$file ++ if test "$mode" = clean ; then ++ noexename=$name ++ case $file in ++ *.exe) ++ file=`$echo $file|${SED} 's,.exe$,,'` ++ noexename=`$echo $name|${SED} 's,.exe$,,'` ++ # $file with .exe has already been added to rmfiles, ++ # add $file without .exe ++ rmfiles="$rmfiles $file" ++ ;; ++ esac ++ # Do a test to see if this is a libtool program. ++ if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then ++ relink_command= ++ . $dir/$noexename + +- rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" +- if test "$fast_install" = yes && test -n "$relink_command"; then +- rmfiles="$rmfiles $objdir/lt-$name" ++ # note $name still contains .exe if it was in $file originally ++ # as does the version of $file that was added into $rmfiles ++ rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" ++ if test "$fast_install" = yes && test -n "$relink_command"; then ++ rmfiles="$rmfiles $objdir/lt-$name" ++ fi ++ if test "X$noexename" != "X$name" ; then ++ rmfiles="$rmfiles $objdir/lt-${noexename}.c" ++ fi + fi + fi + ;; +@@ -4725,6 +6617,7 @@ + $show "$rm $rmfiles" + $run $rm $rmfiles || exit_status=1 + done ++ objdir="$origobjdir" + + # Try to remove the ${objdir}s in the directories where we deleted files + for dir in $rmdirs; do +@@ -4740,15 +6633,22 @@ + "") + $echo "$modename: you must specify a MODE" 1>&2 + $echo "$generic_help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + ;; + esac + +- $echo "$modename: invalid operation mode \`$mode'" 1>&2 +- $echo "$generic_help" 1>&2 +- exit 1 ++ if test -z "$exec_cmd"; then ++ $echo "$modename: invalid operation mode \`$mode'" 1>&2 ++ $echo "$generic_help" 1>&2 ++ exit $EXIT_FAILURE ++ fi + fi # test -z "$show_help" + ++if test -n "$exec_cmd"; then ++ eval exec $exec_cmd ++ exit $EXIT_FAILURE ++fi ++ + # We need to display help for each of the modes. + case $mode in + "") $echo \ +@@ -4765,6 +6665,7 @@ + --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] + --quiet same as \`--silent' + --silent don't print informational messages ++ --tag=TAG use configuration variables from tag TAG + --version print version information + + MODE must be one of the following: +@@ -4778,8 +6679,10 @@ + uninstall remove libraries from an installed directory + + MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for +-a more detailed description of MODE." +- exit 0 ++a more detailed description of MODE. ++ ++Report bugs to ." ++ exit $EXIT_SUCCESS + ;; + + clean) +@@ -4890,6 +6793,9 @@ + -no-install link a not-installable executable + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects ++ -objectlist FILE Use a list of object files found in FILE to specify objects ++ -precious-files-regex REGEX ++ don't remove output files matching REGEX + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries +@@ -4931,14 +6837,33 @@ + *) + $echo "$modename: invalid operation mode \`$mode'" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + ;; + esac + +-echo ++$echo + $echo "Try \`$modename --help' for more information about other modes." + +-exit 0 ++exit $? ++ ++# The TAGs below are defined such that we never get into a situation ++# in which we disable both kinds of libraries. Given conflicting ++# choices, we go for a static library, that is the most portable, ++# since we can't tell whether shared libraries were disabled because ++# the user asked for that or because the platform doesn't support ++# them. This is particularly important on AIX, because we don't ++# support having both static and shared libraries enabled at the same ++# time on that platform, so we default to a shared-only configuration. ++# If a disable-shared tag is given, we'll fallback to a static-only ++# configuration. But we'll never go from static-only to shared-only. ++ ++# ### BEGIN LIBTOOL TAG CONFIG: disable-shared ++disable_libs=shared ++# ### END LIBTOOL TAG CONFIG: disable-shared ++ ++# ### BEGIN LIBTOOL TAG CONFIG: disable-static ++disable_libs=static ++# ### END LIBTOOL TAG CONFIG: disable-static + + # Local Variables: + # mode:shell-script +Index: kxl-1.1.7/missing +=================================================================== +--- kxl-1.1.7.orig/missing 2003-01-02 05:05:20.000000000 +0100 ++++ kxl-1.1.7/missing 2006-05-09 18:51:27.000000000 +0200 +@@ -1,7 +1,11 @@ + #! /bin/sh + # Common stub for a few missing GNU programs while installing. +-# Copyright (C) 1996, 1997 Free Software Foundation, Inc. +-# Franc,ois Pinard , 1996. ++ ++scriptversion=2005-06-08.21 ++ ++# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005 ++# Free Software Foundation, Inc. ++# Originally by Fran,cois Pinard , 1996. + + # This program is free software; you can redistribute it and/or modify + # it under the terms of the GNU General Public License as published by +@@ -15,15 +19,47 @@ + + # You should have received a copy of the GNU General Public License + # along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. ++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA ++# 02110-1301, USA. ++ ++# As a special exception to the GNU General Public License, if you ++# distribute this file as part of a program that contains a ++# configuration script generated by Autoconf, you may include it under ++# the same distribution terms that you use for the rest of that program. + + if test $# -eq 0; then + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 + fi + ++run=: ++ ++# In the cases where this matters, `missing' is being run in the ++# srcdir already. ++if test -f configure.ac; then ++ configure_ac=configure.ac ++else ++ configure_ac=configure.in ++fi ++ ++msg="missing on your system" ++ + case "$1" in ++--run) ++ # Try to run requested program, and just exit if it succeeds. ++ run= ++ shift ++ "$@" && exit 0 ++ # Exit code 63 means version mismatch. This often happens ++ # when the user try to use an ancient version of a tool on ++ # a file that requires a minimum version. In this case we ++ # we should proceed has if the program had been absent, or ++ # if --run hadn't been passed. ++ if test $? = 63; then ++ run=: ++ msg="probably too old" ++ fi ++ ;; + + -h|--h|--he|--hel|--help) + echo "\ +@@ -35,6 +71,7 @@ + Options: + -h, --help display this help and exit + -v, --version output version information and exit ++ --run try to run the given command, and emulate it if it fails + + Supported PROGRAM values: + aclocal touch file \`aclocal.m4' +@@ -43,13 +80,19 @@ + automake touch all \`Makefile.in' files + bison create \`y.tab.[ch]', if possible, from existing .[ch] + flex create \`lex.yy.c', if possible, from existing .c ++ help2man touch the output file + lex create \`lex.yy.c', if possible, from existing .c + makeinfo touch the output file +- yacc create \`y.tab.[ch]', if possible, from existing .[ch]" ++ tar try tar, gnutar, gtar, then tar without non-portable flags ++ yacc create \`y.tab.[ch]', if possible, from existing .[ch] ++ ++Send bug reports to ." ++ exit $? + ;; + + -v|--v|--ve|--ver|--vers|--versi|--versio|--version) +- echo "missing - GNU libit 0.0" ++ echo "missing $scriptversion (GNU Automake)" ++ exit $? + ;; + + -*) +@@ -58,10 +101,45 @@ + exit 1 + ;; + +- aclocal) ++esac ++ ++# Now exit if we have it, but it failed. Also exit now if we ++# don't have it and --version was passed (most likely to detect ++# the program). ++case "$1" in ++ lex|yacc) ++ # Not GNU programs, they don't have --version. ++ ;; ++ ++ tar) ++ if test -n "$run"; then ++ echo 1>&2 "ERROR: \`tar' requires --run" ++ exit 1 ++ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then ++ exit 1 ++ fi ++ ;; ++ ++ *) ++ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then ++ # We have it, but it failed. ++ exit 1 ++ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then ++ # Could not run --version or --help. This is probably someone ++ # running `$TOOL --version' or `$TOOL --help' to check whether ++ # $TOOL exists and not knowing $TOOL uses missing. ++ exit 1 ++ fi ++ ;; ++esac ++ ++# If it does not exist, or fails to run (possibly an outdated version), ++# try to emulate it. ++case "$1" in ++ aclocal*) + echo 1>&2 "\ +-WARNING: \`$1' is missing on your system. You should only need it if +- you modified \`acinclude.m4' or \`configure.in'. You might want ++WARNING: \`$1' is $msg. You should only need it if ++ you modified \`acinclude.m4' or \`${configure_ac}'. You might want + to install the \`Automake' and \`Perl' packages. Grab them from + any GNU archive site." + touch aclocal.m4 +@@ -69,8 +147,8 @@ + + autoconf) + echo 1>&2 "\ +-WARNING: \`$1' is missing on your system. You should only need it if +- you modified \`configure.in'. You might want to install the ++WARNING: \`$1' is $msg. You should only need it if ++ you modified \`${configure_ac}'. You might want to install the + \`Autoconf' and \`GNU m4' packages. Grab them from any GNU + archive site." + touch configure +@@ -78,11 +156,11 @@ + + autoheader) + echo 1>&2 "\ +-WARNING: \`$1' is missing on your system. You should only need it if +- you modified \`acconfig.h' or \`configure.in'. You might want ++WARNING: \`$1' is $msg. You should only need it if ++ you modified \`acconfig.h' or \`${configure_ac}'. You might want + to install the \`Autoconf' and \`GNU m4' packages. Grab them + from any GNU archive site." +- files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' configure.in` ++ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` + test -z "$files" && files="config.h" + touch_files= + for f in $files; do +@@ -95,10 +173,10 @@ + touch $touch_files + ;; + +- automake) ++ automake*) + echo 1>&2 "\ +-WARNING: \`$1' is missing on your system. You should only need it if +- you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'. ++WARNING: \`$1' is $msg. You should only need it if ++ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. + You might want to install the \`Automake' and \`Perl' packages. + Grab them from any GNU archive site." + find . -type f -name Makefile.am -print | +@@ -106,9 +184,32 @@ + while read f; do touch "$f"; done + ;; + ++ autom4te) ++ echo 1>&2 "\ ++WARNING: \`$1' is needed, but is $msg. ++ You might have modified some files without having the ++ proper tools for further handling them. ++ You can get \`$1' as part of \`Autoconf' from any GNU ++ archive site." ++ ++ file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` ++ test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` ++ if test -f "$file"; then ++ touch $file ++ else ++ test -z "$file" || exec >$file ++ echo "#! /bin/sh" ++ echo "# Created by GNU Automake missing as a replacement of" ++ echo "# $ $@" ++ echo "exit 0" ++ chmod +x $file ++ exit 1 ++ fi ++ ;; ++ + bison|yacc) + echo 1>&2 "\ +-WARNING: \`$1' is missing on your system. You should only need it if ++WARNING: \`$1' $msg. You should only need it if + you modified a \`.y' file. You may need the \`Bison' package + in order for those modifications to take effect. You can get + \`Bison' from any GNU archive site." +@@ -138,7 +239,7 @@ + + lex|flex) + echo 1>&2 "\ +-WARNING: \`$1' is missing on your system. You should only need it if ++WARNING: \`$1' is $msg. You should only need it if + you modified a \`.l' file. You may need the \`Flex' package + in order for those modifications to take effect. You can get + \`Flex' from any GNU archive site." +@@ -159,28 +260,90 @@ + fi + ;; + ++ help2man) ++ echo 1>&2 "\ ++WARNING: \`$1' is $msg. You should only need it if ++ you modified a dependency of a manual page. You may need the ++ \`Help2man' package in order for those modifications to take ++ effect. You can get \`Help2man' from any GNU archive site." ++ ++ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` ++ if test -z "$file"; then ++ file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` ++ fi ++ if [ -f "$file" ]; then ++ touch $file ++ else ++ test -z "$file" || exec >$file ++ echo ".ab help2man is required to generate this page" ++ exit 1 ++ fi ++ ;; ++ + makeinfo) + echo 1>&2 "\ +-WARNING: \`$1' is missing on your system. You should only need it if ++WARNING: \`$1' is $msg. You should only need it if + you modified a \`.texi' or \`.texinfo' file, or any other file + indirectly affecting the aspect of the manual. The spurious + call might also be the consequence of using a buggy \`make' (AIX, + DU, IRIX). You might want to install the \`Texinfo' package or + the \`GNU make' package. Grab either from any GNU archive site." ++ # The file to touch is that specified with -o ... + file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + if test -z "$file"; then +- file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` +- file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` ++ # ... or it is the one specified with @setfilename ... ++ infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` ++ file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile` ++ # ... or it is derived from the source name (dir/f.texi becomes f.info) ++ test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info + fi ++ # If the file does not exist, the user really needs makeinfo; ++ # let's fail without touching anything. ++ test -f $file || exit 1 + touch $file + ;; + ++ tar) ++ shift ++ ++ # We have already tried tar in the generic part. ++ # Look for gnutar/gtar before invocation to avoid ugly error ++ # messages. ++ if (gnutar --version > /dev/null 2>&1); then ++ gnutar "$@" && exit 0 ++ fi ++ if (gtar --version > /dev/null 2>&1); then ++ gtar "$@" && exit 0 ++ fi ++ firstarg="$1" ++ if shift; then ++ case "$firstarg" in ++ *o*) ++ firstarg=`echo "$firstarg" | sed s/o//` ++ tar "$firstarg" "$@" && exit 0 ++ ;; ++ esac ++ case "$firstarg" in ++ *h*) ++ firstarg=`echo "$firstarg" | sed s/h//` ++ tar "$firstarg" "$@" && exit 0 ++ ;; ++ esac ++ fi ++ ++ echo 1>&2 "\ ++WARNING: I can't seem to be able to run \`tar' with the given arguments. ++ You may want to install GNU tar or Free paxutils, or check the ++ command line arguments." ++ exit 1 ++ ;; ++ + *) + echo 1>&2 "\ +-WARNING: \`$1' is needed, and you do not seem to have it handy on your +- system. You might have modified some files without having the ++WARNING: \`$1' is needed, and is $msg. ++ You might have modified some files without having the + proper tools for further handling them. Check the \`README' file, +- it often tells you about the needed prerequirements for installing ++ it often tells you about the needed prerequisites for installing + this package. You may also peek at any GNU archive site, in case + some other package would contain this missing \`$1' program." + exit 1 +@@ -188,3 +351,10 @@ + esac + + exit 0 ++ ++# Local variables: ++# eval: (add-hook 'write-file-hooks 'time-stamp) ++# time-stamp-start: "scriptversion=" ++# time-stamp-format: "%:y-%02m-%02d.%02H" ++# time-stamp-end: "$" ++# End: +Index: kxl-1.1.7/src/Makefile.in +=================================================================== +--- kxl-1.1.7.orig/src/Makefile.in 2003-02-14 08:25:44.000000000 +0100 ++++ kxl-1.1.7/src/Makefile.in 2006-05-09 18:51:28.000000000 +0200 +@@ -1,6 +1,8 @@ +-# Makefile.in generated automatically by automake 1.4-p4 from Makefile.am ++# Makefile.in generated by automake 1.9.6 from Makefile.am. ++# @configure_input@ + +-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. ++# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -10,177 +12,273 @@ + # even the implied warranty of MERCHANTABILITY or FITNESS FOR A + # PARTICULAR PURPOSE. + ++@SET_MAKE@ + +-SHELL = @SHELL@ + + srcdir = @srcdir@ + top_srcdir = @top_srcdir@ + VPATH = @srcdir@ +-prefix = @prefix@ +-exec_prefix = @exec_prefix@ +- +-bindir = @bindir@ +-sbindir = @sbindir@ +-libexecdir = @libexecdir@ +-datadir = @datadir@ +-sysconfdir = @sysconfdir@ +-sharedstatedir = @sharedstatedir@ +-localstatedir = @localstatedir@ +-libdir = @libdir@ +-infodir = @infodir@ +-mandir = @mandir@ +-includedir = @includedir@ +-oldincludedir = /usr/include +- +-DESTDIR = +- + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ +- + top_builddir = .. +- +-ACLOCAL = @ACLOCAL@ +-AUTOCONF = @AUTOCONF@ +-AUTOMAKE = @AUTOMAKE@ +-AUTOHEADER = @AUTOHEADER@ +- ++am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + INSTALL = @INSTALL@ +-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +-INSTALL_DATA = @INSTALL_DATA@ +-INSTALL_SCRIPT = @INSTALL_SCRIPT@ +-transform = @program_transform_name@ +- ++install_sh_DATA = $(install_sh) -c -m 644 ++install_sh_PROGRAM = $(install_sh) -c ++install_sh_SCRIPT = $(install_sh) -c ++INSTALL_HEADER = $(INSTALL_DATA) ++transform = $(program_transform_name) + NORMAL_INSTALL = : + PRE_INSTALL = : + POST_INSTALL = : + NORMAL_UNINSTALL = : + PRE_UNINSTALL = : + POST_UNINSTALL = : +-host_alias = @host_alias@ ++build_triplet = @build@ + host_triplet = @host@ +-AS = @AS@ ++subdir = src ++DIST_COMMON = $(include_HEADERS) $(srcdir)/Makefile.am \ ++ $(srcdir)/Makefile.in ++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 ++am__aclocal_m4_deps = $(top_srcdir)/configure.in ++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ ++ $(ACLOCAL_M4) ++mkinstalldirs = $(install_sh) -d ++CONFIG_CLEAN_FILES = ++am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; ++am__vpath_adj = case $$p in \ ++ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ ++ *) f=$$p;; \ ++ esac; ++am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; ++am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)" ++libLTLIBRARIES_INSTALL = $(INSTALL) ++LTLIBRARIES = $(lib_LTLIBRARIES) ++libKXL_la_DEPENDENCIES = ++am_libKXL_la_OBJECTS = KXLmisc.lo KXLsound.lo KXLjoystick.lo \ ++ KXLvisual.lo KXLimage.lo ++libKXL_la_OBJECTS = $(am_libKXL_la_OBJECTS) ++DEFAULT_INCLUDES = -I. -I$(srcdir) ++depcomp = $(SHELL) $(top_srcdir)/depcomp ++am__depfiles_maybe = depfiles ++COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ ++ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) ++LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \ ++ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ ++ $(AM_CFLAGS) $(CFLAGS) ++CCLD = $(CC) ++LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ ++ $(AM_LDFLAGS) $(LDFLAGS) -o $@ ++SOURCES = $(libKXL_la_SOURCES) ++DIST_SOURCES = $(libKXL_la_SOURCES) ++includeHEADERS_INSTALL = $(INSTALL_HEADER) ++HEADERS = $(include_HEADERS) ++ETAGS = etags ++CTAGS = ctags ++DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++ACLOCAL = @ACLOCAL@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ ++AMTAR = @AMTAR@ ++AR = @AR@ ++AUTOCONF = @AUTOCONF@ ++AUTOHEADER = @AUTOHEADER@ ++AUTOMAKE = @AUTOMAKE@ ++AWK = @AWK@ + CC = @CC@ +-DLLTOOL = @DLLTOOL@ ++CCDEPMODE = @CCDEPMODE@ ++CFLAGS = @CFLAGS@ ++CPP = @CPP@ ++CPPFLAGS = @CPPFLAGS@ ++CXX = @CXX@ ++CXXCPP = @CXXCPP@ ++CXXDEPMODE = @CXXDEPMODE@ ++CXXFLAGS = @CXXFLAGS@ ++CYGPATH_W = @CYGPATH_W@ ++DEFS = @DEFS@ ++DEPDIR = @DEPDIR@ + ECHO = @ECHO@ ++ECHO_C = @ECHO_C@ ++ECHO_N = @ECHO_N@ ++ECHO_T = @ECHO_T@ ++EGREP = @EGREP@ + EXEEXT = @EXEEXT@ ++F77 = @F77@ ++FFLAGS = @FFLAGS@ ++INSTALL_DATA = @INSTALL_DATA@ ++INSTALL_PROGRAM = @INSTALL_PROGRAM@ ++INSTALL_SCRIPT = @INSTALL_SCRIPT@ ++INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ ++LDFLAGS = @LDFLAGS@ ++LIBOBJS = @LIBOBJS@ ++LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LN_S = @LN_S@ ++LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-OBJDUMP = @OBJDUMP@ + OBJEXT = @OBJEXT@ + PACKAGE = @PACKAGE@ ++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ ++PACKAGE_NAME = @PACKAGE_NAME@ ++PACKAGE_STRING = @PACKAGE_STRING@ ++PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_VERSION = @PACKAGE_VERSION@ ++PATH_SEPARATOR = @PATH_SEPARATOR@ + RANLIB = @RANLIB@ ++SET_MAKE = @SET_MAKE@ ++SHELL = @SHELL@ + STRIP = @STRIP@ + VERSION = @VERSION@ ++X_CFLAGS = @X_CFLAGS@ ++X_EXTRA_LIBS = @X_EXTRA_LIBS@ ++X_LIBS = @X_LIBS@ ++X_PRE_LIBS = @X_PRE_LIBS@ ++ac_ct_AR = @ac_ct_AR@ ++ac_ct_CC = @ac_ct_CC@ ++ac_ct_CXX = @ac_ct_CXX@ ++ac_ct_F77 = @ac_ct_F77@ ++ac_ct_RANLIB = @ac_ct_RANLIB@ ++ac_ct_STRIP = @ac_ct_STRIP@ + aclocaldir = @aclocaldir@ +- ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ ++am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ ++am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ ++am__include = @am__include@ ++am__leading_dot = @am__leading_dot@ ++am__quote = @am__quote@ ++am__tar = @am__tar@ ++am__untar = @am__untar@ ++bindir = @bindir@ ++build = @build@ ++build_alias = @build_alias@ ++build_cpu = @build_cpu@ ++build_os = @build_os@ ++build_vendor = @build_vendor@ ++datadir = @datadir@ ++exec_prefix = @exec_prefix@ ++host = @host@ ++host_alias = @host_alias@ ++host_cpu = @host_cpu@ ++host_os = @host_os@ ++host_vendor = @host_vendor@ ++includedir = @includedir@ ++infodir = @infodir@ ++install_sh = @install_sh@ ++libdir = @libdir@ ++libexecdir = @libexecdir@ ++localstatedir = @localstatedir@ ++mandir = @mandir@ ++mkdir_p = @mkdir_p@ ++oldincludedir = @oldincludedir@ ++prefix = @prefix@ ++program_transform_name = @program_transform_name@ ++sbindir = @sbindir@ ++sharedstatedir = @sharedstatedir@ ++sysconfdir = @sysconfdir@ ++target_alias = @target_alias@ + lib_LTLIBRARIES = libKXL.la + libKXL_la_SOURCES = KXLmisc.c KXLsound.c KXLjoystick.c KXLvisual.c KXLimage.c + include_HEADERS = KXL.h +-libKXL_la_LDFLAGS = -release $(VERSION) +-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +-CONFIG_CLEAN_FILES = +-LTLIBRARIES = $(lib_LTLIBRARIES) +- +- +-DEFS = @DEFS@ -I. -I$(srcdir) +-CPPFLAGS = @CPPFLAGS@ +-LDFLAGS = @LDFLAGS@ +-LIBS = @LIBS@ +-X_CFLAGS = @X_CFLAGS@ +-X_LIBS = @X_LIBS@ +-X_EXTRA_LIBS = @X_EXTRA_LIBS@ +-X_PRE_LIBS = @X_PRE_LIBS@ +-libKXL_la_LIBADD = +-libKXL_la_OBJECTS = KXLmisc.lo KXLsound.lo KXLjoystick.lo KXLvisual.lo \ +-KXLimage.lo +-CFLAGS = @CFLAGS@ +-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +-CCLD = $(CC) +-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ +-HEADERS = $(include_HEADERS) +- +-DIST_COMMON = Makefile.am Makefile.in +- ++libKXL_la_LDFLAGS = -version-info 0:0:0 ++#libKXL_la_LDFLAGS = -release $(VERSION) ++libKXL_la_LIBADD = -L/usr/X11R6/lib -lX11 ++all: all-am + +-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) +- +-TAR = gtar +-GZIP_ENV = --best +-SOURCES = $(libKXL_la_SOURCES) +-OBJECTS = $(libKXL_la_OBJECTS) +- +-all: all-redirect + .SUFFIXES: +-.SUFFIXES: .S .c .lo .o .obj .s +-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) +- cd $(top_srcdir) && $(AUTOMAKE) --foreign --include-deps src/Makefile +- +-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +- cd $(top_builddir) \ +- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status +- +- +-mostlyclean-libLTLIBRARIES: +- +-clean-libLTLIBRARIES: +- -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) +- +-distclean-libLTLIBRARIES: +- +-maintainer-clean-libLTLIBRARIES: +- ++.SUFFIXES: .c .lo .o .obj ++$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) ++ @for dep in $?; do \ ++ case '$(am__configure_deps)' in \ ++ *$$dep*) \ ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ ++ && exit 0; \ ++ exit 1;; \ ++ esac; \ ++ done; \ ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \ ++ cd $(top_srcdir) && \ ++ $(AUTOMAKE) --foreign src/Makefile ++.PRECIOUS: Makefile ++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status ++ @case '$?' in \ ++ *config.status*) \ ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ ++ *) \ ++ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ ++ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ ++ esac; ++ ++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++ ++$(top_srcdir)/configure: $(am__configure_deps) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(ACLOCAL_M4): $(am__aclocal_m4_deps) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + install-libLTLIBRARIES: $(lib_LTLIBRARIES) + @$(NORMAL_INSTALL) +- $(mkinstalldirs) $(DESTDIR)$(libdir) ++ test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)" + @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + if test -f $$p; then \ +- echo "$(LIBTOOL) --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p"; \ +- $(LIBTOOL) --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p; \ ++ f=$(am__strip_dir) \ ++ echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \ ++ $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \ + else :; fi; \ + done + + uninstall-libLTLIBRARIES: + @$(NORMAL_UNINSTALL) +- list='$(lib_LTLIBRARIES)'; for p in $$list; do \ +- $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \ ++ @set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \ ++ p=$(am__strip_dir) \ ++ echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \ ++ $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \ + done + +-.c.o: +- $(COMPILE) -c $< +- +-# FIXME: We should only use cygpath when building on Windows, +-# and only if it is available. +-.c.obj: +- $(COMPILE) -c `cygpath -w $<` +- +-.s.o: +- $(COMPILE) -c $< +- +-.S.o: +- $(COMPILE) -c $< ++clean-libLTLIBRARIES: ++ -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) ++ @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ ++ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ ++ test "$$dir" != "$$p" || dir=.; \ ++ echo "rm -f \"$${dir}/so_locations\""; \ ++ rm -f "$${dir}/so_locations"; \ ++ done ++libKXL.la: $(libKXL_la_OBJECTS) $(libKXL_la_DEPENDENCIES) ++ $(LINK) -rpath $(libdir) $(libKXL_la_LDFLAGS) $(libKXL_la_OBJECTS) $(libKXL_la_LIBADD) $(LIBS) + + mostlyclean-compile: +- -rm -f *.o core *.core + -rm -f *.$(OBJEXT) + +-clean-compile: +- + distclean-compile: + -rm -f *.tab.c + +-maintainer-clean-compile: ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/KXLimage.Plo@am__quote@ ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/KXLjoystick.Plo@am__quote@ ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/KXLmisc.Plo@am__quote@ ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/KXLsound.Plo@am__quote@ ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/KXLvisual.Plo@am__quote@ + +-.c.lo: +- $(LIBTOOL) --mode=compile $(COMPILE) -c $< ++.c.o: ++@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ ++@am__fastdepCC_FALSE@ $(COMPILE) -c $< + +-.s.lo: +- $(LIBTOOL) --mode=compile $(COMPILE) -c $< ++.c.obj: ++@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ ++@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + +-.S.lo: +- $(LIBTOOL) --mode=compile $(COMPILE) -c $< ++.c.lo: ++@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ ++@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< + + mostlyclean-libtool: + -rm -f *.lo +@@ -189,155 +287,197 @@ + -rm -rf .libs _libs + + distclean-libtool: +- +-maintainer-clean-libtool: +- +-libKXL.la: $(libKXL_la_OBJECTS) $(libKXL_la_DEPENDENCIES) +- $(LINK) -rpath $(libdir) $(libKXL_la_LDFLAGS) $(libKXL_la_OBJECTS) $(libKXL_la_LIBADD) $(LIBS) +- ++ -rm -f libtool ++uninstall-info-am: + install-includeHEADERS: $(include_HEADERS) + @$(NORMAL_INSTALL) +- $(mkinstalldirs) $(DESTDIR)$(includedir) ++ test -z "$(includedir)" || $(mkdir_p) "$(DESTDIR)$(includedir)" + @list='$(include_HEADERS)'; for p in $$list; do \ +- if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \ +- echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(includedir)/$$p"; \ +- $(INSTALL_DATA) $$d$$p $(DESTDIR)$(includedir)/$$p; \ ++ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ ++ f=$(am__strip_dir) \ ++ echo " $(includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \ ++ $(includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \ + done + + uninstall-includeHEADERS: + @$(NORMAL_UNINSTALL) +- list='$(include_HEADERS)'; for p in $$list; do \ +- rm -f $(DESTDIR)$(includedir)/$$p; \ ++ @list='$(include_HEADERS)'; for p in $$list; do \ ++ f=$(am__strip_dir) \ ++ echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \ ++ rm -f "$(DESTDIR)$(includedir)/$$f"; \ + done + ++ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) ++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ ++ unique=`for i in $$list; do \ ++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ++ done | \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ ++ mkid -fID $$unique + tags: TAGS + +-ID: $(HEADERS) $(SOURCES) $(LISP) +- list='$(SOURCES) $(HEADERS)'; \ +- unique=`for i in $$list; do echo $$i; done | \ +- awk ' { files[$$0] = 1; } \ ++TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ ++ $(TAGS_FILES) $(LISP) ++ tags=; \ ++ here=`pwd`; \ ++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ ++ unique=`for i in $$list; do \ ++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ++ done | \ ++ $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ +- here=`pwd` && cd $(srcdir) \ +- && mkid -f$$here/ID $$unique $(LISP) +- +-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) ++ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ test -n "$$unique" || unique=$$empty_fix; \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$tags $$unique; \ ++ fi ++ctags: CTAGS ++CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ ++ $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ +- list='$(SOURCES) $(HEADERS)'; \ +- unique=`for i in $$list; do echo $$i; done | \ +- awk ' { files[$$0] = 1; } \ ++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ ++ unique=`for i in $$list; do \ ++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ++ done | \ ++ $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ +- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ +- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) +- +-mostlyclean-tags: +- +-clean-tags: ++ test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ ++ $$tags $$unique ++ ++GTAGS: ++ here=`$(am__cd) $(top_builddir) && pwd` \ ++ && cd $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) $$here + + distclean-tags: +- -rm -f TAGS ID +- +-maintainer-clean-tags: +- +-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) +- +-subdir = src ++ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) +- @for file in $(DISTFILES); do \ +- d=$(srcdir); \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ ++ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- cp -pr $$d/$$file $(distdir)/$$file; \ ++ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ ++ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ fi; \ ++ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ +- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ +- || cp -p $$d/$$file $(distdir)/$$file || :; \ ++ || cp -p $$d/$$file $(distdir)/$$file \ ++ || exit 1; \ + fi; \ + done +-KXLimage.lo KXLimage.o : KXLimage.c KXL.h +-KXLjoypad.lo KXLjoypad.o : KXLjoypad.c KXL.h +-KXLjoystick.lo KXLjoystick.o : KXLjoystick.c KXL.h +-KXLmisc.lo KXLmisc.o : KXLmisc.c KXL.h +-KXLsound.lo KXLsound.o : KXLsound.c KXL.h +-KXLvisual.lo KXLvisual.o : KXLvisual.c KXL.h +- +-info-am: +-info: info-am +-dvi-am: +-dvi: dvi-am + check-am: all-am + check: check-am +-installcheck-am: +-installcheck: installcheck-am +-install-exec-am: install-libLTLIBRARIES ++all-am: Makefile $(LTLIBRARIES) $(HEADERS) ++installdirs: ++ for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)"; do \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ ++ done ++install: install-am + install-exec: install-exec-am +- +-install-data-am: install-includeHEADERS + install-data: install-data-am ++uninstall: uninstall-am + + install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +-install: install-am +-uninstall-am: uninstall-libLTLIBRARIES uninstall-includeHEADERS +-uninstall: uninstall-am +-all-am: Makefile $(LTLIBRARIES) $(HEADERS) +-all-redirect: all-am +-install-strip: +- $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +-installdirs: +- $(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(includedir) +- + ++installcheck: installcheck-am ++install-strip: ++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ ++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ ++ `test -z '$(STRIP)' || \ ++ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + mostlyclean-generic: + + clean-generic: + + distclean-generic: +- -rm -f Makefile $(CONFIG_CLEAN_FILES) +- -rm -f config.cache config.log stamp-h stamp-h[0-9]* ++ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + + maintainer-clean-generic: +-mostlyclean-am: mostlyclean-libLTLIBRARIES mostlyclean-compile \ +- mostlyclean-libtool mostlyclean-tags \ +- mostlyclean-generic ++ @echo "This command is intended for maintainers to use" ++ @echo "it deletes files that may require special tools to rebuild." ++clean: clean-am + +-mostlyclean: mostlyclean-am ++clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \ ++ mostlyclean-am + +-clean-am: clean-libLTLIBRARIES clean-compile clean-libtool clean-tags \ +- clean-generic mostlyclean-am ++distclean: distclean-am ++ -rm -rf ./$(DEPDIR) ++ -rm -f Makefile ++distclean-am: clean-am distclean-compile distclean-generic \ ++ distclean-libtool distclean-tags + +-clean: clean-am ++dvi: dvi-am + +-distclean-am: distclean-libLTLIBRARIES distclean-compile \ +- distclean-libtool distclean-tags distclean-generic \ +- clean-am +- -rm -f libtool ++dvi-am: + +-distclean: distclean-am ++html: html-am + +-maintainer-clean-am: maintainer-clean-libLTLIBRARIES \ +- maintainer-clean-compile maintainer-clean-libtool \ +- maintainer-clean-tags maintainer-clean-generic \ +- distclean-am +- @echo "This command is intended for maintainers to use;" +- @echo "it deletes files that may require special tools to rebuild." ++info: info-am ++ ++info-am: ++ ++install-data-am: install-includeHEADERS ++ ++install-exec-am: install-libLTLIBRARIES ++ ++install-info: install-info-am ++ ++install-man: ++ ++installcheck-am: + + maintainer-clean: maintainer-clean-am ++ -rm -rf ./$(DEPDIR) ++ -rm -f Makefile ++maintainer-clean-am: distclean-am maintainer-clean-generic ++ ++mostlyclean: mostlyclean-am ++ ++mostlyclean-am: mostlyclean-compile mostlyclean-generic \ ++ mostlyclean-libtool ++ ++pdf: pdf-am ++ ++pdf-am: + +-.PHONY: mostlyclean-libLTLIBRARIES distclean-libLTLIBRARIES \ +-clean-libLTLIBRARIES maintainer-clean-libLTLIBRARIES \ +-uninstall-libLTLIBRARIES install-libLTLIBRARIES mostlyclean-compile \ +-distclean-compile clean-compile maintainer-clean-compile \ +-mostlyclean-libtool distclean-libtool clean-libtool \ +-maintainer-clean-libtool uninstall-includeHEADERS \ +-install-includeHEADERS tags mostlyclean-tags distclean-tags clean-tags \ +-maintainer-clean-tags distdir info-am info dvi-am dvi check check-am \ +-installcheck-am installcheck install-exec-am install-exec \ +-install-data-am install-data install-am install uninstall-am uninstall \ +-all-redirect all-am all installdirs mostlyclean-generic \ +-distclean-generic clean-generic maintainer-clean-generic clean \ +-mostlyclean distclean maintainer-clean ++ps: ps-am + ++ps-am: ++ ++uninstall-am: uninstall-includeHEADERS uninstall-info-am \ ++ uninstall-libLTLIBRARIES ++ ++.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ ++ clean-libLTLIBRARIES clean-libtool ctags distclean \ ++ distclean-compile distclean-generic distclean-libtool \ ++ distclean-tags distdir dvi dvi-am html html-am info info-am \ ++ install install-am install-data install-data-am install-exec \ ++ install-exec-am install-includeHEADERS install-info \ ++ install-info-am install-libLTLIBRARIES install-man \ ++ install-strip installcheck installcheck-am installdirs \ ++ maintainer-clean maintainer-clean-generic mostlyclean \ ++ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ ++ pdf pdf-am ps ps-am tags uninstall uninstall-am \ ++ uninstall-includeHEADERS uninstall-info-am \ ++ uninstall-libLTLIBRARIES + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +Index: kxl-1.1.7/docs/Makefile.in +=================================================================== +--- kxl-1.1.7.orig/docs/Makefile.in 2003-02-14 08:25:45.000000000 +0100 ++++ kxl-1.1.7/docs/Makefile.in 2006-05-09 18:51:27.000000000 +0200 +@@ -1,6 +1,8 @@ +-# Makefile.in generated automatically by automake 1.4-p4 from Makefile.am ++# Makefile.in generated by automake 1.9.6 from Makefile.am. ++# @configure_input@ + +-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. ++# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -10,170 +12,301 @@ + # even the implied warranty of MERCHANTABILITY or FITNESS FOR A + # PARTICULAR PURPOSE. + +- +-SHELL = @SHELL@ +- ++@SET_MAKE@ + srcdir = @srcdir@ + top_srcdir = @top_srcdir@ + VPATH = @srcdir@ +-prefix = @prefix@ +-exec_prefix = @exec_prefix@ +- +-bindir = @bindir@ +-sbindir = @sbindir@ +-libexecdir = @libexecdir@ +-datadir = @datadir@ +-sysconfdir = @sysconfdir@ +-sharedstatedir = @sharedstatedir@ +-localstatedir = @localstatedir@ +-libdir = @libdir@ +-infodir = @infodir@ +-mandir = @mandir@ +-includedir = @includedir@ +-oldincludedir = /usr/include +- +-DESTDIR = +- + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ +- + top_builddir = .. +- +-ACLOCAL = @ACLOCAL@ +-AUTOCONF = @AUTOCONF@ +-AUTOMAKE = @AUTOMAKE@ +-AUTOHEADER = @AUTOHEADER@ +- ++am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + INSTALL = @INSTALL@ +-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +-INSTALL_DATA = @INSTALL_DATA@ +-INSTALL_SCRIPT = @INSTALL_SCRIPT@ +-transform = @program_transform_name@ +- ++install_sh_DATA = $(install_sh) -c -m 644 ++install_sh_PROGRAM = $(install_sh) -c ++install_sh_SCRIPT = $(install_sh) -c ++INSTALL_HEADER = $(INSTALL_DATA) ++transform = $(program_transform_name) + NORMAL_INSTALL = : + PRE_INSTALL = : + POST_INSTALL = : + NORMAL_UNINSTALL = : + PRE_UNINSTALL = : + POST_UNINSTALL = : +-host_alias = @host_alias@ ++build_triplet = @build@ + host_triplet = @host@ +-AS = @AS@ ++subdir = docs ++DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 ++am__aclocal_m4_deps = $(top_srcdir)/configure.in ++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ ++ $(ACLOCAL_M4) ++mkinstalldirs = $(install_sh) -d ++CONFIG_CLEAN_FILES = ++SOURCES = ++DIST_SOURCES = ++DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++ACLOCAL = @ACLOCAL@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ ++AMTAR = @AMTAR@ ++AR = @AR@ ++AUTOCONF = @AUTOCONF@ ++AUTOHEADER = @AUTOHEADER@ ++AUTOMAKE = @AUTOMAKE@ ++AWK = @AWK@ + CC = @CC@ +-DLLTOOL = @DLLTOOL@ ++CCDEPMODE = @CCDEPMODE@ ++CFLAGS = @CFLAGS@ ++CPP = @CPP@ ++CPPFLAGS = @CPPFLAGS@ ++CXX = @CXX@ ++CXXCPP = @CXXCPP@ ++CXXDEPMODE = @CXXDEPMODE@ ++CXXFLAGS = @CXXFLAGS@ ++CYGPATH_W = @CYGPATH_W@ ++DEFS = @DEFS@ ++DEPDIR = @DEPDIR@ + ECHO = @ECHO@ ++ECHO_C = @ECHO_C@ ++ECHO_N = @ECHO_N@ ++ECHO_T = @ECHO_T@ ++EGREP = @EGREP@ + EXEEXT = @EXEEXT@ ++F77 = @F77@ ++FFLAGS = @FFLAGS@ ++INSTALL_DATA = @INSTALL_DATA@ ++INSTALL_PROGRAM = @INSTALL_PROGRAM@ ++INSTALL_SCRIPT = @INSTALL_SCRIPT@ ++INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ ++LDFLAGS = @LDFLAGS@ ++LIBOBJS = @LIBOBJS@ ++LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LN_S = @LN_S@ ++LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-OBJDUMP = @OBJDUMP@ + OBJEXT = @OBJEXT@ + PACKAGE = @PACKAGE@ ++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ ++PACKAGE_NAME = @PACKAGE_NAME@ ++PACKAGE_STRING = @PACKAGE_STRING@ ++PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_VERSION = @PACKAGE_VERSION@ ++PATH_SEPARATOR = @PATH_SEPARATOR@ + RANLIB = @RANLIB@ ++SET_MAKE = @SET_MAKE@ ++SHELL = @SHELL@ + STRIP = @STRIP@ + VERSION = @VERSION@ ++X_CFLAGS = @X_CFLAGS@ ++X_EXTRA_LIBS = @X_EXTRA_LIBS@ ++X_LIBS = @X_LIBS@ ++X_PRE_LIBS = @X_PRE_LIBS@ ++ac_ct_AR = @ac_ct_AR@ ++ac_ct_CC = @ac_ct_CC@ ++ac_ct_CXX = @ac_ct_CXX@ ++ac_ct_F77 = @ac_ct_F77@ ++ac_ct_RANLIB = @ac_ct_RANLIB@ ++ac_ct_STRIP = @ac_ct_STRIP@ + aclocaldir = @aclocaldir@ +- ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ ++am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ ++am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ ++am__include = @am__include@ ++am__leading_dot = @am__leading_dot@ ++am__quote = @am__quote@ ++am__tar = @am__tar@ ++am__untar = @am__untar@ ++bindir = @bindir@ ++build = @build@ ++build_alias = @build_alias@ ++build_cpu = @build_cpu@ ++build_os = @build_os@ ++build_vendor = @build_vendor@ ++datadir = @datadir@ ++exec_prefix = @exec_prefix@ ++host = @host@ ++host_alias = @host_alias@ ++host_cpu = @host_cpu@ ++host_os = @host_os@ ++host_vendor = @host_vendor@ ++includedir = @includedir@ ++infodir = @infodir@ ++install_sh = @install_sh@ ++libdir = @libdir@ ++libexecdir = @libexecdir@ ++localstatedir = @localstatedir@ ++mandir = @mandir@ ++mkdir_p = @mkdir_p@ ++oldincludedir = @oldincludedir@ ++prefix = @prefix@ ++program_transform_name = @program_transform_name@ ++sbindir = @sbindir@ ++sharedstatedir = @sharedstatedir@ ++sysconfdir = @sysconfdir@ ++target_alias = @target_alias@ + EXTRA_DIST = *.html *.gif *.bmp *.wav +-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +-CONFIG_CLEAN_FILES = +-DIST_COMMON = Makefile.am Makefile.in +- +- +-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) ++all: all-am + +-TAR = gtar +-GZIP_ENV = --best +-all: all-redirect + .SUFFIXES: +-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) +- cd $(top_srcdir) && $(AUTOMAKE) --foreign --include-deps docs/Makefile ++$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) ++ @for dep in $?; do \ ++ case '$(am__configure_deps)' in \ ++ *$$dep*) \ ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ ++ && exit 0; \ ++ exit 1;; \ ++ esac; \ ++ done; \ ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign docs/Makefile'; \ ++ cd $(top_srcdir) && \ ++ $(AUTOMAKE) --foreign docs/Makefile ++.PRECIOUS: Makefile ++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status ++ @case '$?' in \ ++ *config.status*) \ ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ ++ *) \ ++ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ ++ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ ++ esac; ++ ++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++ ++$(top_srcdir)/configure: $(am__configure_deps) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(ACLOCAL_M4): $(am__aclocal_m4_deps) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +- cd $(top_builddir) \ +- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status ++mostlyclean-libtool: ++ -rm -f *.lo + ++clean-libtool: ++ -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + tags: TAGS + TAGS: + ++ctags: CTAGS ++CTAGS: + +-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) +- +-subdir = docs + + distdir: $(DISTFILES) +- @for file in $(DISTFILES); do \ +- d=$(srcdir); \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ ++ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- cp -pr $$d/$$file $(distdir)/$$file; \ ++ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ ++ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ fi; \ ++ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ +- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ +- || cp -p $$d/$$file $(distdir)/$$file || :; \ ++ || cp -p $$d/$$file $(distdir)/$$file \ ++ || exit 1; \ + fi; \ + done +-info-am: +-info: info-am +-dvi-am: +-dvi: dvi-am + check-am: all-am + check: check-am +-installcheck-am: +-installcheck: installcheck-am +-install-exec-am: ++all-am: Makefile ++installdirs: ++install: install-am + install-exec: install-exec-am +- +-install-data-am: + install-data: install-data-am ++uninstall: uninstall-am + + install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +-install: install-am +-uninstall-am: +-uninstall: uninstall-am +-all-am: Makefile +-all-redirect: all-am +-install-strip: +- $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +-installdirs: +- + ++installcheck: installcheck-am ++install-strip: ++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ ++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ ++ `test -z '$(STRIP)' || \ ++ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + mostlyclean-generic: + + clean-generic: + + distclean-generic: +- -rm -f Makefile $(CONFIG_CLEAN_FILES) +- -rm -f config.cache config.log stamp-h stamp-h[0-9]* ++ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + + maintainer-clean-generic: +-mostlyclean-am: mostlyclean-generic ++ @echo "This command is intended for maintainers to use" ++ @echo "it deletes files that may require special tools to rebuild." ++clean: clean-am + +-mostlyclean: mostlyclean-am ++clean-am: clean-generic clean-libtool mostlyclean-am + +-clean-am: clean-generic mostlyclean-am ++distclean: distclean-am ++ -rm -f Makefile ++distclean-am: clean-am distclean-generic distclean-libtool + +-clean: clean-am ++dvi: dvi-am + +-distclean-am: distclean-generic clean-am +- -rm -f libtool ++dvi-am: + +-distclean: distclean-am ++html: html-am + +-maintainer-clean-am: maintainer-clean-generic distclean-am +- @echo "This command is intended for maintainers to use;" +- @echo "it deletes files that may require special tools to rebuild." ++info: info-am ++ ++info-am: ++ ++install-data-am: ++ ++install-exec-am: ++ ++install-info: install-info-am ++ ++install-man: ++ ++installcheck-am: + + maintainer-clean: maintainer-clean-am ++ -rm -f Makefile ++maintainer-clean-am: distclean-am maintainer-clean-generic ++ ++mostlyclean: mostlyclean-am ++ ++mostlyclean-am: mostlyclean-generic mostlyclean-libtool ++ ++pdf: pdf-am ++ ++pdf-am: ++ ++ps: ps-am ++ ++ps-am: + +-.PHONY: tags distdir info-am info dvi-am dvi check check-am \ +-installcheck-am installcheck install-exec-am install-exec \ +-install-data-am install-data install-am install uninstall-am uninstall \ +-all-redirect all-am all installdirs mostlyclean-generic \ +-distclean-generic clean-generic maintainer-clean-generic clean \ +-mostlyclean distclean maintainer-clean ++uninstall-am: uninstall-info-am + ++.PHONY: all all-am check check-am clean clean-generic clean-libtool \ ++ distclean distclean-generic distclean-libtool distdir dvi \ ++ dvi-am html html-am info info-am install install-am \ ++ install-data install-data-am install-exec install-exec-am \ ++ install-info install-info-am install-man install-strip \ ++ installcheck installcheck-am installdirs maintainer-clean \ ++ maintainer-clean-generic mostlyclean mostlyclean-generic \ ++ mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \ ++ uninstall-info-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +Index: kxl-1.1.7/depcomp +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ kxl-1.1.7/depcomp 2006-05-09 18:51:27.000000000 +0200 +@@ -0,0 +1,530 @@ ++#! /bin/sh ++# depcomp - compile a program generating dependencies as side-effects ++ ++scriptversion=2005-07-09.11 ++ ++# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. ++ ++# This program is free software; you can redistribute it and/or modify ++# it under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 2, or (at your option) ++# any later version. ++ ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++ ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA ++# 02110-1301, USA. ++ ++# As a special exception to the GNU General Public License, if you ++# distribute this file as part of a program that contains a ++# configuration script generated by Autoconf, you may include it under ++# the same distribution terms that you use for the rest of that program. ++ ++# Originally written by Alexandre Oliva . ++ ++case $1 in ++ '') ++ echo "$0: No command. Try \`$0 --help' for more information." 1>&2 ++ exit 1; ++ ;; ++ -h | --h*) ++ cat <<\EOF ++Usage: depcomp [--help] [--version] PROGRAM [ARGS] ++ ++Run PROGRAMS ARGS to compile a file, generating dependencies ++as side-effects. ++ ++Environment variables: ++ depmode Dependency tracking mode. ++ source Source file read by `PROGRAMS ARGS'. ++ object Object file output by `PROGRAMS ARGS'. ++ DEPDIR directory where to store dependencies. ++ depfile Dependency file to output. ++ tmpdepfile Temporary file to use when outputing dependencies. ++ libtool Whether libtool is used (yes/no). ++ ++Report bugs to . ++EOF ++ exit $? ++ ;; ++ -v | --v*) ++ echo "depcomp $scriptversion" ++ exit $? ++ ;; ++esac ++ ++if test -z "$depmode" || test -z "$source" || test -z "$object"; then ++ echo "depcomp: Variables source, object and depmode must be set" 1>&2 ++ exit 1 ++fi ++ ++# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. ++depfile=${depfile-`echo "$object" | ++ sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} ++tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} ++ ++rm -f "$tmpdepfile" ++ ++# Some modes work just like other modes, but use different flags. We ++# parameterize here, but still list the modes in the big case below, ++# to make depend.m4 easier to write. Note that we *cannot* use a case ++# here, because this file can only contain one case statement. ++if test "$depmode" = hp; then ++ # HP compiler uses -M and no extra arg. ++ gccflag=-M ++ depmode=gcc ++fi ++ ++if test "$depmode" = dashXmstdout; then ++ # This is just like dashmstdout with a different argument. ++ dashmflag=-xM ++ depmode=dashmstdout ++fi ++ ++case "$depmode" in ++gcc3) ++## gcc 3 implements dependency tracking that does exactly what ++## we want. Yay! Note: for some reason libtool 1.4 doesn't like ++## it if -MD -MP comes after the -MF stuff. Hmm. ++ "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" ++ stat=$? ++ if test $stat -eq 0; then : ++ else ++ rm -f "$tmpdepfile" ++ exit $stat ++ fi ++ mv "$tmpdepfile" "$depfile" ++ ;; ++ ++gcc) ++## There are various ways to get dependency output from gcc. Here's ++## why we pick this rather obscure method: ++## - Don't want to use -MD because we'd like the dependencies to end ++## up in a subdir. Having to rename by hand is ugly. ++## (We might end up doing this anyway to support other compilers.) ++## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ++## -MM, not -M (despite what the docs say). ++## - Using -M directly means running the compiler twice (even worse ++## than renaming). ++ if test -z "$gccflag"; then ++ gccflag=-MD, ++ fi ++ "$@" -Wp,"$gccflag$tmpdepfile" ++ stat=$? ++ if test $stat -eq 0; then : ++ else ++ rm -f "$tmpdepfile" ++ exit $stat ++ fi ++ rm -f "$depfile" ++ echo "$object : \\" > "$depfile" ++ alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz ++## The second -e expression handles DOS-style file names with drive letters. ++ sed -e 's/^[^:]*: / /' \ ++ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ++## This next piece of magic avoids the `deleted header file' problem. ++## The problem is that when a header file which appears in a .P file ++## is deleted, the dependency causes make to die (because there is ++## typically no way to rebuild the header). We avoid this by adding ++## dummy dependencies for each header file. Too bad gcc doesn't do ++## this for us directly. ++ tr ' ' ' ++' < "$tmpdepfile" | ++## Some versions of gcc put a space before the `:'. On the theory ++## that the space means something, we add a space to the output as ++## well. ++## Some versions of the HPUX 10.20 sed can't process this invocation ++## correctly. Breaking it into two sed invocations is a workaround. ++ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" ++ rm -f "$tmpdepfile" ++ ;; ++ ++hp) ++ # This case exists only to let depend.m4 do its work. It works by ++ # looking at the text of this script. This case will never be run, ++ # since it is checked for above. ++ exit 1 ++ ;; ++ ++sgi) ++ if test "$libtool" = yes; then ++ "$@" "-Wp,-MDupdate,$tmpdepfile" ++ else ++ "$@" -MDupdate "$tmpdepfile" ++ fi ++ stat=$? ++ if test $stat -eq 0; then : ++ else ++ rm -f "$tmpdepfile" ++ exit $stat ++ fi ++ rm -f "$depfile" ++ ++ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files ++ echo "$object : \\" > "$depfile" ++ ++ # Clip off the initial element (the dependent). Don't try to be ++ # clever and replace this with sed code, as IRIX sed won't handle ++ # lines with more than a fixed number of characters (4096 in ++ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; ++ # the IRIX cc adds comments like `#:fec' to the end of the ++ # dependency line. ++ tr ' ' ' ++' < "$tmpdepfile" \ ++ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ ++ tr ' ++' ' ' >> $depfile ++ echo >> $depfile ++ ++ # The second pass generates a dummy entry for each header file. ++ tr ' ' ' ++' < "$tmpdepfile" \ ++ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ ++ >> $depfile ++ else ++ # The sourcefile does not contain any dependencies, so just ++ # store a dummy comment line, to avoid errors with the Makefile ++ # "include basename.Plo" scheme. ++ echo "#dummy" > "$depfile" ++ fi ++ rm -f "$tmpdepfile" ++ ;; ++ ++aix) ++ # The C for AIX Compiler uses -M and outputs the dependencies ++ # in a .u file. In older versions, this file always lives in the ++ # current directory. Also, the AIX compiler puts `$object:' at the ++ # start of each line; $object doesn't have directory information. ++ # Version 6 uses the directory in both cases. ++ stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'` ++ tmpdepfile="$stripped.u" ++ if test "$libtool" = yes; then ++ "$@" -Wc,-M ++ else ++ "$@" -M ++ fi ++ stat=$? ++ ++ if test -f "$tmpdepfile"; then : ++ else ++ stripped=`echo "$stripped" | sed 's,^.*/,,'` ++ tmpdepfile="$stripped.u" ++ fi ++ ++ if test $stat -eq 0; then : ++ else ++ rm -f "$tmpdepfile" ++ exit $stat ++ fi ++ ++ if test -f "$tmpdepfile"; then ++ outname="$stripped.o" ++ # Each line is of the form `foo.o: dependent.h'. ++ # Do two passes, one to just change these to ++ # `$object: dependent.h' and one to simply `dependent.h:'. ++ sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" ++ sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" ++ else ++ # The sourcefile does not contain any dependencies, so just ++ # store a dummy comment line, to avoid errors with the Makefile ++ # "include basename.Plo" scheme. ++ echo "#dummy" > "$depfile" ++ fi ++ rm -f "$tmpdepfile" ++ ;; ++ ++icc) ++ # Intel's C compiler understands `-MD -MF file'. However on ++ # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c ++ # ICC 7.0 will fill foo.d with something like ++ # foo.o: sub/foo.c ++ # foo.o: sub/foo.h ++ # which is wrong. We want: ++ # sub/foo.o: sub/foo.c ++ # sub/foo.o: sub/foo.h ++ # sub/foo.c: ++ # sub/foo.h: ++ # ICC 7.1 will output ++ # foo.o: sub/foo.c sub/foo.h ++ # and will wrap long lines using \ : ++ # foo.o: sub/foo.c ... \ ++ # sub/foo.h ... \ ++ # ... ++ ++ "$@" -MD -MF "$tmpdepfile" ++ stat=$? ++ if test $stat -eq 0; then : ++ else ++ rm -f "$tmpdepfile" ++ exit $stat ++ fi ++ rm -f "$depfile" ++ # Each line is of the form `foo.o: dependent.h', ++ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. ++ # Do two passes, one to just change these to ++ # `$object: dependent.h' and one to simply `dependent.h:'. ++ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" ++ # Some versions of the HPUX 10.20 sed can't process this invocation ++ # correctly. Breaking it into two sed invocations is a workaround. ++ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | ++ sed -e 's/$/ :/' >> "$depfile" ++ rm -f "$tmpdepfile" ++ ;; ++ ++tru64) ++ # The Tru64 compiler uses -MD to generate dependencies as a side ++ # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. ++ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put ++ # dependencies in `foo.d' instead, so we check for that too. ++ # Subdirectories are respected. ++ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` ++ test "x$dir" = "x$object" && dir= ++ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` ++ ++ if test "$libtool" = yes; then ++ # With Tru64 cc, shared objects can also be used to make a ++ # static library. This mecanism is used in libtool 1.4 series to ++ # handle both shared and static libraries in a single compilation. ++ # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. ++ # ++ # With libtool 1.5 this exception was removed, and libtool now ++ # generates 2 separate objects for the 2 libraries. These two ++ # compilations output dependencies in in $dir.libs/$base.o.d and ++ # in $dir$base.o.d. We have to check for both files, because ++ # one of the two compilations can be disabled. We should prefer ++ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is ++ # automatically cleaned when .libs/ is deleted, while ignoring ++ # the former would cause a distcleancheck panic. ++ tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 ++ tmpdepfile2=$dir$base.o.d # libtool 1.5 ++ tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 ++ tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 ++ "$@" -Wc,-MD ++ else ++ tmpdepfile1=$dir$base.o.d ++ tmpdepfile2=$dir$base.d ++ tmpdepfile3=$dir$base.d ++ tmpdepfile4=$dir$base.d ++ "$@" -MD ++ fi ++ ++ stat=$? ++ if test $stat -eq 0; then : ++ else ++ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" ++ exit $stat ++ fi ++ ++ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" ++ do ++ test -f "$tmpdepfile" && break ++ done ++ if test -f "$tmpdepfile"; then ++ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" ++ # That's a tab and a space in the []. ++ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" ++ else ++ echo "#dummy" > "$depfile" ++ fi ++ rm -f "$tmpdepfile" ++ ;; ++ ++#nosideeffect) ++ # This comment above is used by automake to tell side-effect ++ # dependency tracking mechanisms from slower ones. ++ ++dashmstdout) ++ # Important note: in order to support this mode, a compiler *must* ++ # always write the preprocessed file to stdout, regardless of -o. ++ "$@" || exit $? ++ ++ # Remove the call to Libtool. ++ if test "$libtool" = yes; then ++ while test $1 != '--mode=compile'; do ++ shift ++ done ++ shift ++ fi ++ ++ # Remove `-o $object'. ++ IFS=" " ++ for arg ++ do ++ case $arg in ++ -o) ++ shift ++ ;; ++ $object) ++ shift ++ ;; ++ *) ++ set fnord "$@" "$arg" ++ shift # fnord ++ shift # $arg ++ ;; ++ esac ++ done ++ ++ test -z "$dashmflag" && dashmflag=-M ++ # Require at least two characters before searching for `:' ++ # in the target name. This is to cope with DOS-style filenames: ++ # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. ++ "$@" $dashmflag | ++ sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" ++ rm -f "$depfile" ++ cat < "$tmpdepfile" > "$depfile" ++ tr ' ' ' ++' < "$tmpdepfile" | \ ++## Some versions of the HPUX 10.20 sed can't process this invocation ++## correctly. Breaking it into two sed invocations is a workaround. ++ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" ++ rm -f "$tmpdepfile" ++ ;; ++ ++dashXmstdout) ++ # This case only exists to satisfy depend.m4. It is never actually ++ # run, as this mode is specially recognized in the preamble. ++ exit 1 ++ ;; ++ ++makedepend) ++ "$@" || exit $? ++ # Remove any Libtool call ++ if test "$libtool" = yes; then ++ while test $1 != '--mode=compile'; do ++ shift ++ done ++ shift ++ fi ++ # X makedepend ++ shift ++ cleared=no ++ for arg in "$@"; do ++ case $cleared in ++ no) ++ set ""; shift ++ cleared=yes ;; ++ esac ++ case "$arg" in ++ -D*|-I*) ++ set fnord "$@" "$arg"; shift ;; ++ # Strip any option that makedepend may not understand. Remove ++ # the object too, otherwise makedepend will parse it as a source file. ++ -*|$object) ++ ;; ++ *) ++ set fnord "$@" "$arg"; shift ;; ++ esac ++ done ++ obj_suffix="`echo $object | sed 's/^.*\././'`" ++ touch "$tmpdepfile" ++ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" ++ rm -f "$depfile" ++ cat < "$tmpdepfile" > "$depfile" ++ sed '1,2d' "$tmpdepfile" | tr ' ' ' ++' | \ ++## Some versions of the HPUX 10.20 sed can't process this invocation ++## correctly. Breaking it into two sed invocations is a workaround. ++ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" ++ rm -f "$tmpdepfile" "$tmpdepfile".bak ++ ;; ++ ++cpp) ++ # Important note: in order to support this mode, a compiler *must* ++ # always write the preprocessed file to stdout. ++ "$@" || exit $? ++ ++ # Remove the call to Libtool. ++ if test "$libtool" = yes; then ++ while test $1 != '--mode=compile'; do ++ shift ++ done ++ shift ++ fi ++ ++ # Remove `-o $object'. ++ IFS=" " ++ for arg ++ do ++ case $arg in ++ -o) ++ shift ++ ;; ++ $object) ++ shift ++ ;; ++ *) ++ set fnord "$@" "$arg" ++ shift # fnord ++ shift # $arg ++ ;; ++ esac ++ done ++ ++ "$@" -E | ++ sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ ++ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | ++ sed '$ s: \\$::' > "$tmpdepfile" ++ rm -f "$depfile" ++ echo "$object : \\" > "$depfile" ++ cat < "$tmpdepfile" >> "$depfile" ++ sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" ++ rm -f "$tmpdepfile" ++ ;; ++ ++msvisualcpp) ++ # Important note: in order to support this mode, a compiler *must* ++ # always write the preprocessed file to stdout, regardless of -o, ++ # because we must use -o when running libtool. ++ "$@" || exit $? ++ IFS=" " ++ for arg ++ do ++ case "$arg" in ++ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") ++ set fnord "$@" ++ shift ++ shift ++ ;; ++ *) ++ set fnord "$@" "$arg" ++ shift ++ shift ++ ;; ++ esac ++ done ++ "$@" -E | ++ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" ++ rm -f "$depfile" ++ echo "$object : \\" > "$depfile" ++ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" ++ echo " " >> "$depfile" ++ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" ++ rm -f "$tmpdepfile" ++ ;; ++ ++none) ++ exec "$@" ++ ;; ++ ++*) ++ echo "Unknown depmode $depmode" 1>&2 ++ exit 1 ++ ;; ++esac ++ ++exit 0 ++ ++# Local Variables: ++# mode: shell-script ++# sh-indentation: 2 ++# eval: (add-hook 'write-file-hooks 'time-stamp) ++# time-stamp-start: "scriptversion=" ++# time-stamp-format: "%:y-%02m-%02d.%02H" ++# time-stamp-end: "$" ++# End: --- kxl-1.1.7.orig/debian/patches/020_64bits.diff +++ kxl-1.1.7/debian/patches/020_64bits.diff @@ -0,0 +1,21 @@ +--- kxl-1.1.7.orig/src/KXL.h ++++ kxl-1.1.7/src/KXL.h +@@ -150,12 +152,12 @@ + #define KXL_KEY_Braceright 0x07d + #define KXL_KEY_Asciitilde 0x07e + // Type of variable +-typedef signed char Sint8; +-typedef unsigned char Uint8; +-typedef signed short Sint16; +-typedef unsigned short Uint16; +-typedef signed long Sint32; +-typedef unsigned long Uint32; ++typedef int8_t Sint8; ++typedef uint8_t Uint8; ++typedef int16_t Sint16; ++typedef uint16_t Uint16; ++typedef int32_t Sint32; ++typedef uint32_t Uint32; + // Image + typedef struct { + Pixmap Buffer; // Drawing image --- kxl-1.1.7.orig/debian/patches/series +++ kxl-1.1.7/debian/patches/series @@ -0,0 +1,8 @@ +000_soname_xlibs.diff -p1 +010_rebootstrap.diff -p1 +020_64bits.diff -p1 +020_alsa.diff -p1 +020_autorepeat.diff -p1 +020_headers.diff -p1 +020_badfont.diff +030_underquoted_definition.diff --- kxl-1.1.7.orig/debian/patches/020_badfont.diff +++ kxl-1.1.7/debian/patches/020_badfont.diff @@ -0,0 +1,18 @@ +Index: kxl-1.1.7/src/KXLvisual.c +=================================================================== +--- kxl-1.1.7.orig/src/KXLvisual.c 2006-05-09 22:51:49.000000000 +0200 ++++ kxl-1.1.7/src/KXLvisual.c 2006-05-09 22:55:26.000000000 +0200 +@@ -437,9 +437,12 @@ + 0, 0); + KXL_Root->WinFont = XLoadQueryFont(KXL_Root->Display, str); + if (KXL_Root->WinFont == (XFontStruct *)NULL) { ++ KXL_Root->WinFont = XLoadQueryFont(KXL_Root->Display, "fixed"); ++ } ++ if (KXL_Root->WinFont == (XFontStruct *)NULL) { + fprintf(stderr, + "KXL error message\n" +- "loading font error (%s)\n", ++ "loading font error (%s), fallback failed\n", + str); + exit(-1); + } --- kxl-1.1.7.orig/debian/libkxl0.dirs +++ kxl-1.1.7/debian/libkxl0.dirs @@ -0,0 +1,2 @@ +usr/lib +usr/share/doc/libkxl0 --- kxl-1.1.7.orig/debian/rules +++ kxl-1.1.7/debian/rules @@ -0,0 +1,87 @@ +#!/usr/bin/make -f +# debian/rules for libkxl - uses debhelper. + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + +# Compilation options +export CONFIG_FLAGS="--prefix=/usr" + +build: build-stamp +build-stamp: + dh_testdir + QUILT_PATCHES=debian/patches quilt push -a || test $$? = 2 + touch configure.in \ + && touch aclocal.m4 \ + && touch configure \ + && touch config.h.in \ + && touch `find . -name Makefile.in` + ./configure --prefix=/usr --mandir=$${prefix}/share/man \ + --infodir=$${prefix}/share/info + $(MAKE) + touch build-stamp + +clean: + dh_testdir + dh_testroot + rm -f build-stamp + -$(MAKE) distclean + QUILT_PATCHES=debian/patches quilt pop -a -R || test $$? = 2 + dh_clean + +install: build + dh_testdir + dh_testroot + dh_clean -k + dh_installdirs + + $(MAKE) install DESTDIR=`pwd`/debian/libkxl0/ + + mv debian/libkxl0/usr/lib/*.so debian/libkxl0/usr/lib/*a \ + debian/libkxl0-dev/usr/lib/ + mv debian/libkxl0/usr/include debian/libkxl0-dev/usr/ + mv debian/libkxl0/usr/share/aclocal debian/libkxl0-dev/usr/share/ + + cp -a docs/*.html docs/*.wav docs/*.gif docs/*.bmp \ + debian/libkxl0-dev/usr/share/doc/libkxl0-dev/html/ + + # provide smooth upgrades from my old fucked-up packages + ln -s libKXL.so.0 debian/libkxl0/usr/lib/libKXL-1.1.7.so.0 + +# Build architecture-independent files here. +binary-indep: build install +# We have nothing to do by default. + +# Build architecture-dependent files here. +binary-arch: build install +# dh_testversion + dh_testdir + dh_testroot +# dh_installdebconf + dh_installdocs README +# dh_installexamples +# dh_installmenu +# dh_installemacsen +# dh_installpam +# dh_installinit +# dh_installcron +# dh_installman +# dh_installinfo +# dh_undocumented + dh_installchangelogs ChangeLog + dh_link + dh_strip + dh_compress + dh_fixperms + dh_makeshlibs + dh_installdeb +# dh_perl + + dh_shlibdeps + dh_gencontrol + dh_md5sums + dh_builddeb + +binary: binary-indep binary-arch +.PHONY: build clean binary-indep binary-arch binary install + --- kxl-1.1.7.orig/debian/compat +++ kxl-1.1.7/debian/compat @@ -0,0 +1 @@ +4 --- kxl-1.1.7.orig/debian/libkxl0-dev.dirs +++ kxl-1.1.7/debian/libkxl0-dev.dirs @@ -0,0 +1,2 @@ +usr/lib +usr/share/doc/libkxl0-dev/html --- kxl-1.1.7.orig/debian/changelog +++ kxl-1.1.7/debian/changelog @@ -0,0 +1,131 @@ +kxl (1.1.7-13) unstable; urgency=low + + * debian/control: + + Use ${binary:Version} to make package binNMUable. + + Added XS-Vcs-Svn: field. + + -- Sam Hocevar (Debian packages) Tue, 20 Feb 2007 16:58:39 +0100 + +kxl (1.1.7-12) unstable; urgency=high + + * debian/patches/030_underquoted_definition.diff: + + Fix "underquoted definition of AM_PATH_KXL" aclocal warning. + + -- Sam Hocevar (Debian packages) Fri, 10 Nov 2006 12:08:07 +0100 + +kxl (1.1.7-11) unstable; urgency=low + + * Moved packaging to the Debian Games Team. + + -- Sam Hocevar (Debian packages) Sun, 14 May 2006 15:23:12 -0500 + +kxl (1.1.7-10) unstable; urgency=low + + * Use quilt for patch management. + * debian/control: + + Set policy to 3.7.2. + + Build-depend on debhelper (>= 4.0). + + Build-depend on quilt. + + Removed the now useless build-dependency on xlibs-static-dev. + + Removed the dependency on libxt-dev, because the autoconf X11 libraries + check no longer requires it. + * debian/copyright: + + Fixed the FSF address. + + * debian/patches/010_soname_xlibs.diff: + + Patch from old diff -- fix libkxl soname and link it against libX11. + + * debian/patches/010_rebootstrap.diff: + + Patch from old diff -- rebootstrap package with newer autotools. + + * debian/patches/020_headers.diff: + + Patch from old diff -- fix warning due to missing system headers. + + * debian/patches/020_64bits.diff: + + Patch from old diff -- fix 64 bit types. + + * debian/patches/020_autorepeat.diff: + + Patch from old diff -- add autorepeat handling support to KXL. + + * debian/patches/020_alsa.diff: + + Patch from old diff -- fix audio device blocking issues with some ALSA + drivers. + + * debian/patches/020_badfont.diff: + + New patch -- do not exit the program if the requested font was not found. + + -- Sam Hocevar (Debian packages) Tue, 9 May 2006 11:24:00 -0500 + +kxl (1.1.7-9) unstable; urgency=low + + * debian/control: + + Set policy to 3.6.2.1. + + -- Sam Hocevar (Debian packages) Fri, 15 Jul 2005 14:03:50 +0200 + +kxl (1.1.7-8) unstable; urgency=low + + * debian/control: + + Make the -dev package depend on libxt-dev. + + -- Sam Hocevar (Debian packages) Tue, 30 Mar 2004 09:32:23 +0200 + +kxl (1.1.7-7) unstable; urgency=low + + * debian/control: + + Build-depend on xlibs-static-dev to have XKBstr.h (Closes: #238619). + + -- Sam Hocevar (Debian packages) Thu, 18 Mar 2004 09:42:46 +0100 + +kxl (1.1.7-6) unstable; urgency=low + + * debian/control: + + Depend on linux-kernel-headers because of . + + Depend on libx11-dev instead of xlibs-dev. + + -- Sam Hocevar (Debian packages) Mon, 15 Mar 2004 17:05:14 +0100 + +kxl (1.1.7-5) unstable; urgency=medium + + * src/KXLsound.c: + + Open the sound device with O_NDELAY to avoid hangups if the device + is in use and the OSS driver is buggy (Closes: #213599). + * debian/control: + + Set policy to 3.6.1.0. + + Removed leading "a" from short description. + + -- Sam Hocevar (Debian packages) Sat, 31 May 2003 01:01:12 +0200 + +kxl (1.1.7-4) unstable; urgency=medium + + * Removed libc6-dev from libkxl0-dev's dependencies. + * Set policy to 3.5.10. + + -- Sam Hocevar (Debian packages) Sat, 31 May 2003 01:01:12 +0200 + +kxl (1.1.7-3) unstable; urgency=medium + + * Applied a user-contributed patch for 64 bits machines to fix sound + output (Closes: #192840). + + -- Samuel Hocevar Tue, 13 May 2003 18:22:36 +0200 + +kxl (1.1.7-2) unstable; urgency=low + + * Removed the #@%$&! -version flag so that libtool does not mess with + our library name (Closes: #190780). + * Implemented user-suggested enhancement of the keyboard autorepeat + disabling code (Closes: #190857). + + -- Samuel Hocevar Sun, 27 Apr 2003 18:22:26 +0200 + +kxl (1.1.7-1) unstable; urgency=low + + * First Debian release (Closes: #188885). + * Set library's major number to 0. + * Added -lX11 to the link phase. + * Re-ran "rm -f config.sub config.guess configure install-sh ltmain.sh \ + missing mkinstalldirs && aclocal && libtoolize --force --copy && \ + autoheader && automake --copy --add-missing && autoconf && rm -f INSTALL". + + -- Samuel Hocevar Sat, 12 Apr 2003 05:03:43 +0200 --- kxl-1.1.7.orig/debian/control +++ kxl-1.1.7/debian/control @@ -0,0 +1,34 @@ +Source: kxl +Section: devel +Priority: optional +Maintainer: Debian Games Team +Uploaders: Sam Hocevar (Debian packages) +Build-Depends: debhelper (>= 4.0), quilt, libx11-dev, linux-kernel-headers +Standards-Version: 3.7.2 +XS-Vcs-Svn: svn://svn.debian.org/svn/pkg-games/packages/trunk/kxl/ + +Package: libkxl0 +Section: libs +Architecture: any +Depends: ${shlibs:Depends} +Description: multimedia library for game development + KXL (Kacchan X Windows System Library) is a library targeted at game + development that provides functions for simple image and sound output + as well as higher level functions for text drawing, timer and events + handling and image manipulation. + . + This package contains the libkxl0 runtime library. + +Package: libkxl0-dev +Section: libdevel +Architecture: any +Depends: libkxl0 (= ${binary:Version}), libx11-dev, linux-kernel-headers +Description: development files for libkxl0 + KXL (Kacchan X Windows System Library) is a library targeted at game + development that provides functions for simple image and sound output + as well as higher level functions for text drawing, timer and events + handling and image manipulation. + . + This package contains the header files and static library needed to + compile applications that use libkxl0. +