--- libxxf86vm-1.1.0.orig/autogen.sh +++ libxxf86vm-1.1.0/autogen.sh @@ -0,0 +1,13 @@ +#! /bin/sh + +srcdir=`dirname $0` +test -z "$srcdir" && srcdir=. + +ORIGDIR=`pwd` +cd $srcdir + +autoreconf -v --install || exit 1 +cd $ORIGDIR || exit $? + +$srcdir/configure --enable-maintainer-mode "$@" + --- libxxf86vm-1.1.0.orig/debian/rules +++ libxxf86vm-1.1.0/debian/rules @@ -0,0 +1,97 @@ +#!/usr/bin/make -f +# debian/rules for the Debian libxxf86vm package. +# Copyright © 2004 Scott James Remnant +# Copyright © 2005 Daniel Stone +# Copyright © 2005 David Nusinow + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + +# set this to the name of the main shlib's binary package +PACKAGE = libxxf86vm1 + +include debian/xsfbs/xsfbs.mk + +CFLAGS = -Wall -g +ifneq (,$(filter noopt,$(DEB_BUILD_OPTIONS))) + CFLAGS += -O0 +else + CFLAGS += -O2 +endif +ifneq (,$(filter parallel=%,$(DEB_BUILD_OPTIONS))) + NUMJOBS = $(patsubst parallel=%,%,$(filter parallel=%,$(DEB_BUILD_OPTIONS))) + MAKEFLAGS += -j$(NUMJOBS) +endif + +DEB_HOST_ARCH ?= $(shell dpkg-architecture -qDEB_HOST_ARCH) +DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) +DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) +ifeq ($(DEB_BUILD_GNU_TYPE), $(DEB_HOST_GNU_TYPE)) + confflags += --build=$(DEB_HOST_GNU_TYPE) +else + confflags += --build=$(DEB_BUILD_GNU_TYPE) --host=$(DEB_HOST_GNU_TYPE) +endif + + +build: patch build-stamp +build-stamp: + dh_testdir + autoreconf -vfi + mkdir -p obj-$(DEB_BUILD_GNU_TYPE) + cd obj-$(DEB_BUILD_GNU_TYPE) && \ + ../configure --prefix=/usr --mandir=\$${prefix}/share/man \ + --infodir=\$${prefix}/share/info $(confflags) \ + CFLAGS="$(CFLAGS)" + cd obj-$(DEB_BUILD_GNU_TYPE) && $(MAKE) + >$@ + +clean: xsfclean + dh_testdir + dh_testroot + rm -f build-stamp + + rm -f config.cache config.log config.status + rm -f */config.cache */config.log */config.status + rm -f conftest* */conftest* + rm -rf autom4te.cache */autom4te.cache + rm -rf obj-* + rm -f aclocal.m4 config.guess config.h.in config.sub configure + rm -f depcomp install-sh ltmain.sh missing mkinstalldirs + find -name Makefile.in -delete + rm -f src/config.h.in + + dh_clean + +install: build + dh_testdir + dh_testroot + dh_clean -k + dh_installdirs + + cd obj-$(DEB_BUILD_GNU_TYPE) && $(MAKE) DESTDIR=$(CURDIR)/debian/tmp install + +# Build architecture-dependent files here. +binary-arch: build install + dh_testdir + dh_testroot + + dh_installdocs + dh_install --sourcedir=debian/tmp --list-missing + dh_installchangelogs ChangeLog + dh_link + dh_strip --dbg-package=$(PACKAGE)-dbg + dh_compress + dh_fixperms + dh_makeshlibs + dh_shlibdeps + dh_installdeb + dh_gencontrol + dh_md5sums + dh_builddeb + +# Build architecture-independent files here. +binary-indep: build install +# Nothing to do + +binary: binary-indep binary-arch +.PHONY: build clean binary-indep binary-arch binary install --- libxxf86vm-1.1.0.orig/debian/control +++ libxxf86vm-1.1.0/debian/control @@ -0,0 +1,86 @@ +Source: libxxf86vm +Section: x11 +Priority: optional +Maintainer: Debian X Strike Force +Uploaders: David Nusinow , Andres Salomon , Julien Cristau +Build-Depends: + debhelper (>= 5.0.0), + libx11-dev (>= 1:0.99.2), + x11proto-xf86vidmode-dev (>= 2.2.99.1), + libxext-dev (>= 1:0.99.1), + pkg-config, + quilt, + automake, + libtool, + xutils-dev (>= 1:7.5~1) +Standards-Version: 3.8.3 +Vcs-Git: git://git.debian.org/git/pkg-xorg/lib/libxxf86vm +Vcs-Browser: http://git.debian.org/?p=pkg-xorg/lib/libxxf86vm.git + +Package: libxxf86vm1 +Section: libs +Architecture: any +Depends: ${shlibs:Depends}, ${misc:Depends} +Description: X11 XFree86 video mode extension library + libXxf86vm provides an interface to the XFree86-VidModeExtension + extension, which allows client applications to get and set video mode + timings in extensive detail. It is used by the xvidtune program in + particular. + . + More information about X.Org can be found at: + + + + . + This module can be found at + git://anongit.freedesktop.org/git/xorg/lib/libXxf86vm + +Package: libxxf86vm1-dbg +Section: debug +Architecture: any +Priority: extra +Depends: ${shlibs:Depends}, ${misc:Depends}, libxxf86vm1 (= ${binary:Version}) +Description: X11 XFree86 video mode extension library (debug package) + libXxf86vm provides an interface to the XFree86-VidModeExtension + extension, which allows client applications to get and set video mode + timings in extensive detail. It is used by the xvidtune program in + particular. + . + This package contains the debug versions of the library found in libxxf86vm1. + Non-developers likely have little use for this package. + . + More information about X.Org can be found at: + + + + . + This module can be found at + git://anongit.freedesktop.org/git/xorg/lib/libXxf86vm + +Package: libxxf86vm-dev +Section: libdevel +Architecture: any +Depends: + ${shlibs:Depends}, + ${misc:Depends}, + libxxf86vm1 (= ${binary:Version}), + libx11-dev, + x11proto-xf86vidmode-dev (>= 2.2.99.1) +Replaces: + x11proto-xf86vidmode-dev (<< 2.2.99.1) +Description: X11 XFree86 video mode extension library (development headers) + libXxf86vm provides an interface to the XFree86-VidModeExtension + extension, which allows client applications to get and set video mode + timings in extensive detail. It is used by the xvidtune program in + particular. + . + This package contains the development headers for the library found in + libxxf86vm1. Non-developers likely have little use for this package. + . + More information about X.Org can be found at: + + + + . + This module can be found at + git://anongit.freedesktop.org/git/xorg/lib/libXxf86vm --- libxxf86vm-1.1.0.orig/debian/watch +++ libxxf86vm-1.1.0/debian/watch @@ -0,0 +1,2 @@ +version=3 +http://xorg.freedesktop.org/releases/individual/lib/ libXxf86vm-(.*)\.tar\.gz --- libxxf86vm-1.1.0.orig/debian/copyright +++ libxxf86vm-1.1.0/debian/copyright @@ -0,0 +1,13 @@ +This package was downloaded from +http://xorg.freedesktop.org/releases/individual/lib/ + +Copyright (c) 1995 Kaleb S. Keithley +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicence, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL KALEB S. KEITHLEY BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the name of Kaleb S. Keithley shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization from Kaleb S. Keithley. --- libxxf86vm-1.1.0.orig/debian/README.source +++ libxxf86vm-1.1.0/debian/README.source @@ -0,0 +1,73 @@ +------------------------------------------------------ +Quick Guide To Patching This Package For The Impatient +------------------------------------------------------ + +1. Make sure you have quilt installed +2. Unpack the package as usual with "dpkg-source -x" +3. Run the "patch" target in debian/rules +4. Create a new patch with "quilt new" (see quilt(1)) +5. Edit all the files you want to include in the patch with "quilt edit" + (see quilt(1)). +6. Write the patch with "quilt refresh" (see quilt(1)) +7. Run the "clean" target in debian/rules + +Alternatively, instead of using quilt directly, you can drop the patch in to +debian/patches and add the name of the patch to debian/patches/series. + +------------------------------------ +Guide To The X Strike Force Packages +------------------------------------ + +The X Strike Force team maintains X packages in git repositories on +git.debian.org in the pkg-xorg subdirectory. Most upstream packages +are actually maintained in git repositories as well, so they often +just need to be pulled into git.debian.org in a "upstream-*" branch. +Otherwise, the upstream sources are manually installed in the Debian +git repository. + +The .orig.tar.gz upstream source file could be generated this +"upstream-*" branch in the Debian git repository but it is actually +copied from upstream tarballs directly. + +Due to X.org being highly modular, packaging all X.org applications +as their own independent packages would have created too many Debian +packages. For this reason, some X.org applications have been grouped +into larger packages: xutils, xutils-dev, x11-apps, x11-session-utils, +x11-utils, x11-xfs-utils, x11-xkb-utils, x11-xserver-utils. +Most packages, including the X.org server itself and all libraries +and drivers are, however maintained independently. + +The Debian packaging is added by creating the "debian-*" git branch +which contains the aforementioned "upstream-*" branch plus the debian/ +repository files. +When a patch has to be applied to the Debian package, two solutions +are involved: +* If the patch is available in one of the upstream branches, it + may be git'cherry-picked into the Debian repository. In this + case, it appears directly in the .diff.gz. +* Otherwise, the patch is added to debian/patches/ which is managed + with quilt as documented in /usr/share/doc/quilt/README.source. + +quilt is actually invoked by the Debian X packaging through a larger +set of scripts called XSFBS. XSFBS brings some other X specific +features such as managing dependencies and conflicts due to the video +and input driver ABIs. +XSFBS itself is maintained in a separate repository at + git://git.debian.org/pkg-xorg/xsfbs.git +and it is pulled inside the other Debian X repositories when needed. + +The XSFBS patching system requires a build dependency on quilt. Also +a dependency on $(STAMP_DIR)/patch has to be added to debian/rules +so that the XSFBS patching occurs before the actual build. So the +very first target of the build (likely the one running autoreconf) +should depend on $(STAMP_DIR)/patch. It should also not depend on +anything so that parallel builds are correctly supported (nothing +should probably run while patching is being done). And finally, the +clean target should depend on the xsfclean target so that patches +are unapplied on clean. + +When the upstream sources contain some DFSG-nonfree files, they are +listed in text files in debian/prune/ in the "debian-*" branch of +the Debian repository. XSFBS' scripts then take care of removing +these listed files during the build so as to generate a modified +DFSG-free .orig.tar.gz tarball. --- libxxf86vm-1.1.0.orig/debian/libxxf86vm-dev.install +++ libxxf86vm-1.1.0/debian/libxxf86vm-dev.install @@ -0,0 +1,5 @@ +usr/share/man/* +usr/lib/libXxf86vm.a +usr/lib/libXxf86vm.so +usr/lib/pkgconfig/xxf86vm.pc +usr/include/X11/extensions/ --- libxxf86vm-1.1.0.orig/debian/libxxf86vm1.install +++ libxxf86vm-1.1.0/debian/libxxf86vm1.install @@ -0,0 +1 @@ +usr/lib/libXxf86vm.so.1* --- libxxf86vm-1.1.0.orig/debian/changelog +++ libxxf86vm-1.1.0/debian/changelog @@ -0,0 +1,115 @@ +libxxf86vm (1:1.1.0-2) unstable; urgency=low + + * Upload to unstable. + + -- Julien Cristau Wed, 06 Jan 2010 13:02:53 +0000 + +libxxf86vm (1:1.1.0-1) experimental; urgency=low + + [ Timo Aaltonen ] + * New upstream release. + * Run autoreconf on build. Add build-deps on automake, libtool and + xutils-dev. + * Parse space-separated DEB_BUILD_OPTIONS, and handle parallel=N. + * Bump Standards-Version to 3.8.3. + * Drop pre-dependency on x11-common from libxx86vm-dev. This was needed + for upgrades from sarge. + * Add includes in -dev, bump {Build-,}Depends, add Replaces on + x11proto-xf86vidmode-dev. + * Move -dbg package to section debug. + + -- Julien Cristau Wed, 02 Dec 2009 16:29:01 +0100 + +libxxf86vm (1:1.0.2-1) unstable; urgency=low + + [ Brice Goglin ] + * Add a link to www.X.org and a reference to the upstream module + in the long description. + * Add upstream URL to debian/copyright. + * Install the upstream ChangeLog. + + [ Julien Cristau ] + * New upstream release. + + -- Julien Cristau Tue, 08 Jul 2008 23:45:15 +0200 + +libxxf86vm (1:1.0.1-3) unstable; urgency=low + + * Remove Fabio and Branden from Uploaders with their permission. + * Don't build-depend on packages with a -1 debian revision. + * Bump Standards-Version to 3.7.3. + * Add Vcs-* control fields. + * Don't make libxxf86vm1{,-dbg} depend on x11-common. + * Drop obsolete CVS information from the package descriptions. + * Use ${binary:Version} instead of the deprecated ${Source-Version} + * Add correct Section control fields for all packages. + * Add myself to Uploaders. + * autoreconf with current autools to get updated config.{guess,sub}. + + -- Julien Cristau Sun, 11 May 2008 17:41:49 +0200 + +libxxf86vm (1:1.0.1-2) unstable; urgency=low + + [ Andres Salomon ] + * Autoreconf w/ an updated xutils-dev so that manpages have the 'x' + extension dropped. + + [ Drew Parsons ] + * dbg package has priority extra. + + -- David Nusinow Mon, 18 Sep 2006 22:26:21 -0400 + +libxxf86vm (1:1.0.1-1) experimental; urgency=low + + * New upstream release. + * Drop patches/01_manpage_location.diff; merged upstream. + * Test for obj-$(DEB_BUILD_GNU_TYPE) before creating it during build; + idempotency fix. + * Run dh_install w/ --list-missing. + * Drop duplicate x11-common dep in -dev package. + * Bump standards version to 3.7.2.0. + * Version x11-common pre-dep in -dev package to 1:7.0.0 to match + the rest of Debian. + * Bump debhelper compat to 5. + * Fix dh_strip call to skip the -dbg package. + * Don't attempt to install (non-existent) usr/include/X11/* stuff. + + -- Andres Salomon Sun, 23 Jul 2006 04:35:51 -0400 + +libxxf86vm (1:1.0.0-4) unstable; urgency=low + + * Reorder makeshlib command in rules file so that ldconfig is run + properly. Thanks Drew Parsons and Steve Langasek. + * Add quilt to build-depends + + -- David Nusinow Wed, 19 Apr 2006 02:47:28 -0400 + +libxxf86vm (1:1.0.0-3) unstable; urgency=low + + * Upload to unstable + + -- David Nusinow Thu, 23 Mar 2006 22:46:36 -0500 + +libxxf86vm (1:1.0.0-2) experimental; urgency=low + + * Backport manpage location fix + + -- David Nusinow Thu, 9 Mar 2006 23:38:46 -0500 + +libxxf86vm (1:1.0.0-1) experimental; urgency=low + + * First modular upload to Debian + + -- David Nusinow Thu, 29 Dec 2005 20:57:15 -0500 + +libxxf86vm (7.0.0-2) breezy; urgency=low + + * Bump libxext-dev build-dep to rid us of the dreaded _XOPEN_SOURCE. + + -- Adam Conrad Sun, 24 Jul 2005 12:04:32 +0000 + +libxxf86vm (7.0.0-1) breezy; urgency=low + + * First libxxf86vm release. + + -- Daniel Stone Mon, 16 May 2005 22:10:17 +1000 --- libxxf86vm-1.1.0.orig/debian/compat +++ libxxf86vm-1.1.0/debian/compat @@ -0,0 +1 @@ +5 --- libxxf86vm-1.1.0.orig/debian/xsfbs/repack.sh +++ libxxf86vm-1.1.0/debian/xsfbs/repack.sh @@ -0,0 +1,32 @@ +#!/bin/sh + +set -e + +if ! [ -d debian/prune ]; then + exit 0 +fi + +if [ "x$1" != x--upstream-version ]; then + exit 1 +fi + +version="$2" +filename="$3" + +if [ -z "$version" ] || ! [ -f "$filename" ]; then + exit 1 +fi + +dir="$(pwd)" +tempdir="$(mktemp -d)" + +cd "$tempdir" +tar xf "$dir/$filename" +cat "$dir"/debian/prune/* | while read file; do rm -f */$file; done + +tar czf "$dir/$filename" * +cd "$dir" +rm -rf "$tempdir" +echo "Done pruning upstream tarball" + +exit 0 --- libxxf86vm-1.1.0.orig/debian/xsfbs/xsfbs.mk +++ libxxf86vm-1.1.0/debian/xsfbs/xsfbs.mk @@ -0,0 +1,276 @@ +#!/usr/bin/make -f + +# Debian X Strike Force Build System (XSFBS): Make portion + +# Copyright 1996 Stephen Early +# Copyright 1997 Mark Eichin +# Copyright 1998-2005, 2007 Branden Robinson +# Copyright 2005 David Nusinow +# +# Licensed under the GNU General Public License, version 2. See the file +# /usr/share/common-licenses/GPL or . + +# Originally by Stephen Early +# Modified by Mark W. Eichin +# Modified by Adam Heath +# Modified by Branden Robinson +# Modified by Fabio Massimo Di Nitto +# Modified by David Nusinow +# Acknowledgements to Manoj Srivastava. + +# Pass $(DH_OPTIONS) into the environment for debhelper's benefit. +export DH_OPTIONS + +# force quilt to not use ~/.quiltrc and to use debian/patches +QUILT = QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null + +# Set up parameters for the upstream build environment. + +# Determine (source) package name from Debian changelog. +SOURCE_NAME:=$(shell dpkg-parsechangelog -ldebian/changelog \ + | grep '^Source:' | awk '{print $$2}') + +# Determine package version from Debian changelog. +SOURCE_VERSION:=$(shell dpkg-parsechangelog -ldebian/changelog \ + | grep '^Version:' | awk '{print $$2}') + +# Determine upstream version number. +UPSTREAM_VERSION:=$(shell echo $(SOURCE_VERSION) | sed 's/-.*//') + +# Determine the source version without the epoch for make-orig-tar-gz +NO_EPOCH_VER:=$(shell echo $(UPSTREAM_VERSION) | sed 's/^.://') + +# Figure out who's building this package. +BUILDER:=$(shell echo $${DEBEMAIL:-$${EMAIL:-$$(echo $$LOGNAME@$$(cat /etc/mailname 2>/dev/null))}}) + +# Find out if this is an official build; an official build has nothing but +# digits, dots, and/or the codename of a release in the Debian part of the +# version number. Anything else indicates an unofficial build. +OFFICIAL_BUILD:=$(shell VERSION=$(SOURCE_VERSION); if ! expr "$$(echo $${VERSION\#\#*-} | sed 's/\(woody\|sarge\|etch\|lenny\)//g')" : ".*[^0-9.].*" >/dev/null 2>&1; then echo yes; fi) + +# Set up parameters for the Debian build environment. + +# Determine our architecture. +BUILD_ARCH:=$(shell dpkg-architecture -qDEB_BUILD_ARCH) +# Work around some old-time dpkg braindamage. +BUILD_ARCH:=$(subst i486,i386,$(BUILD_ARCH)) +# The DEB_HOST_ARCH variable may be set per the Debian cross-compilation policy. +ifdef DEB_HOST_ARCH + ARCH:=$(DEB_HOST_ARCH) +else + # dpkg-cross sets the ARCH environment variable; if set, use it. + ifdef ARCH + ARCH:=$(ARCH) + else + ARCH:=$(BUILD_ARCH) + endif +endif + +# $(STAMP_DIR) houses stamp files for complex targets. +STAMP_DIR:=stampdir + +# $(DEBTREEDIR) is where all install rules are told (via $(DESTDIR)) to place +# their files. +DEBTREEDIR:=$(CURDIR)/debian/tmp + +# All "important" targets have four lines: +# 1) A target name that is invoked by a package-building tool or the user. +# This consists of a dependency on a "$(STAMP_DIR)/"-prefixed counterpart. +# 2) A line delcaring 1) as a phony target (".PHONY:"). +# 3) A "$(STAMP_DIR)/"-prefixed target which does the actual work, and may +# depend on other targets. +# 4) A line declaring 3) as a member of the $(stampdir_targets) variable; the +# "$(STAMP_DIR)/" prefix is omitted. +# +# This indirection is needed so that the "stamp" files that signify when a rule +# is done can be located in a separate "stampdir". Recall that make has no way +# to know when a goal has been met for a phony target (like "build" or +# "install"). +# +# At the end of each "$(STAMP_DIR)/" target, be sure to run the command ">$@" +# so that the target will not be run again. Removing the file will make Make +# run the target over. + +# All phony targets should be declared as dependencies of .PHONY, even if they +# do not have "($STAMP_DIR)/"-prefixed counterparts. + +# Define a harmless default rule to keep things from going nuts by accident. +.PHONY: default +default: + +# Set up the $(STAMP_DIR) directory. +.PHONY: stampdir +stampdir_targets+=stampdir +stampdir: $(STAMP_DIR)/stampdir +$(STAMP_DIR)/stampdir: + mkdir $(STAMP_DIR) + >$@ + +# Set up the package build directory as quilt expects to find it. +.PHONY: prepare +stampdir_targets+=prepare +prepare: $(STAMP_DIR)/prepare +$(STAMP_DIR)/prepare: $(STAMP_DIR)/log $(STAMP_DIR)/genscripts + >$@ + +.PHONY: log +stampdir_targets+=log +log: $(STAMP_DIR)/log +$(STAMP_DIR)/log: $(STAMP_DIR)/stampdir + mkdir -p $(STAMP_DIR)/log + +# Apply all patches to the upstream source. +.PHONY: patch +stampdir_targets+=patch +patch: $(STAMP_DIR)/patch +$(STAMP_DIR)/patch: $(STAMP_DIR)/prepare + if ! [ `which quilt` ]; then \ + echo "Couldn't find quilt. Please install it or add it to the build-depends for this package."; \ + exit 1; \ + fi; \ + if $(QUILT) next >/dev/null 2>&1; then \ + echo -n "Applying patches..."; \ + if $(QUILT) push -a -v >$(STAMP_DIR)/log/patch 2>&1; then \ + cat $(STAMP_DIR)/log/patch; \ + echo "successful."; \ + else \ + cat $(STAMP_DIR)/log/patch; \ + echo "failed! (check $(STAMP_DIR)/log/patch for details)"; \ + exit 1; \ + fi; \ + else \ + echo "No patches to apply"; \ + fi; \ + >$@ + +# Revert all patches to the upstream source. +.PHONY: unpatch +unpatch: $(STAMP_DIR)/log + rm -f $(STAMP_DIR)/patch + @echo -n "Unapplying patches..."; \ + if $(QUILT) applied >/dev/null 2>/dev/null; then \ + if $(QUILT) pop -a -v >$(STAMP_DIR)/log/unpatch 2>&1; then \ + cat $(STAMP_DIR)/log/unpatch; \ + echo "successful."; \ + else \ + cat $(STAMP_DIR)/log/unpatch; \ + echo "failed! (check $(STAMP_DIR)/log/unpatch for details)"; \ + exit 1; \ + fi; \ + else \ + echo "nothing to do."; \ + fi + +# Clean the generated maintainer scripts. +.PHONY: cleanscripts +cleanscripts: + rm -f $(STAMP_DIR)/genscripts + rm -f debian/*.config \ + debian/*.postinst \ + debian/*.postrm \ + debian/*.preinst \ + debian/*.prerm + +# Clean the package build tree. +.PHONY: xsfclean +xsfclean: cleanscripts unpatch + dh_testdir + rm -rf .pc + rm -rf $(STAMP_DIR) + dh_clean + +# Remove files from the upstream source tree that we don't need, or which have +# licensing problems. It must be run before creating the .orig.tar.gz. +# +# Note: This rule is for Debian package maintainers' convenience, and is not +# needed for conventional build scenarios. +.PHONY: prune-upstream-tree +prune-upstream-tree: + # Ensure we're in the correct directory. + dh_testdir + grep -rvh '^#' debian/prune/ | xargs --no-run-if-empty rm -rf + +# Verify that there are no offsets or fuzz in the patches we apply. +# +# Note: This rule is for Debian package maintainers' convenience, and is not +# needed for conventional build scenarios. +.PHONY: patch-audit +patch-audit: prepare unpatch + @echo -n "Auditing patches..."; \ + >$(STAMP_DIR)/log/patch; \ + FUZZY=; \ + while [ -n "$$($(QUILT) next)" ]; do \ + RESULT=$$($(QUILT) push -v | tee -a $(STAMP_DIR)/log/patch | grep ^Hunk | sed 's/^Hunk.*\(succeeded\|FAILED\).*/\1/');\ + case "$$RESULT" in \ + succeeded) \ + echo "fuzzy patch: $$($(QUILT) top)" \ + | tee -a $(STAMP_DIR)/log/$$($(QUILT) top); \ + FUZZY=yes; \ + ;; \ + FAILED) \ + echo "broken patch: $$($(QUILT) next)" \ + | tee -a $(STAMP_DIR)/log/$$($(QUILT) next); \ + exit 1; \ + ;; \ + esac; \ + done; \ + if [ -n "$$FUZZY" ]; then \ + echo "there were fuzzy patches; please fix."; \ + exit 1; \ + else \ + echo "done."; \ + fi + +# Generate the maintainer scripts. +.PHONY: genscripts +stampdir_targets+=genscripts +genscripts: $(STAMP_DIR)/genscripts +$(STAMP_DIR)/genscripts: $(STAMP_DIR)/stampdir + for FILE in debian/*.config.in \ + debian/*.postinst.in \ + debian/*.postrm.in \ + debian/*.preinst.in \ + debian/*.prerm.in; do \ + if [ -e "$$FILE" ]; then \ + MAINTSCRIPT=$$(echo $$FILE | sed 's/.in$$//'); \ + sed -n '1,/^#INCLUDE_SHELL_LIB#$$/p' <$$FILE \ + | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >$$MAINTSCRIPT.tmp; \ + cat debian/xsfbs/xsfbs.sh >>$$MAINTSCRIPT.tmp; \ + sed -n '/^#INCLUDE_SHELL_LIB#$$/,$$p' <$$FILE \ + | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >>$$MAINTSCRIPT.tmp; \ + sed -e 's/@SOURCE_VERSION@/$(SOURCE_VERSION)/' \ + -e 's/@OFFICIAL_BUILD@/$(OFFICIAL_BUILD)/' \ + <$$MAINTSCRIPT.tmp >$$MAINTSCRIPT; \ + rm $$MAINTSCRIPT.tmp; \ + fi; \ + done + # Validate syntax of generated shell scripts. + #sh debian/scripts/validate-posix-sh debian/*.config \ + # debian/*.postinst \ + # debian/*.postrm \ + # debian/*.preinst \ + # debian/*.prerm + >$@ + +SERVERMINVERS = $(shell cat /usr/share/xserver-xorg/serverminver 2>/dev/null) +VIDEOABI = $(shell cat /usr/share/xserver-xorg/videoabiver 2>/dev/null) +INPUTABI = $(shell cat /usr/share/xserver-xorg/inputabiver 2>/dev/null) +SERVER_DEPENDS = xserver-xorg-core (>= $(SERVERMINVERS)) +VIDDRIVER_PROVIDES = xserver-xorg-video-$(VIDEOABI) +INPDRIVER_PROVIDES = xserver-xorg-input-$(INPUTABI) +ifeq ($(PACKAGE),) +PACKAGE=$(shell awk '/^Package:/ { print $$2; exit }' < debian/control) +endif + +.PHONY: serverabi +serverabi: install +ifeq ($(SERVERMINVERS),) + @echo error: xserver-xorg-dev needs to be installed + @exit 1 +else + echo "xserver:Depends=$(SERVER_DEPENDS)" >> debian/$(PACKAGE).substvars + echo "xviddriver:Provides=$(VIDDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars + echo "xinpdriver:Provides=$(INPDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars +endif + +# vim:set noet ai sts=8 sw=8 tw=0: --- libxxf86vm-1.1.0.orig/debian/xsfbs/xsfbs.sh +++ libxxf86vm-1.1.0/debian/xsfbs/xsfbs.sh @@ -0,0 +1,622 @@ +# This is the X Strike Force shell library for X Window System package +# maintainer scripts. It serves to define shell functions commonly used by +# such packages, and performs some error checking necessary for proper operation +# of those functions. By itself, it does not "do" much; the maintainer scripts +# invoke the functions defined here to accomplish package installation and +# removal tasks. + +# If you are reading this within a Debian package maintainer script (e.g., +# /var/lib/dpkg/info/PACKAGE.{config,preinst,postinst,prerm,postrm}), you can +# skip past this library by scanning forward in this file to the string +# "GOBSTOPPER". + +SOURCE_VERSION=@SOURCE_VERSION@ +OFFICIAL_BUILD=@OFFICIAL_BUILD@ + +# Use special abnormal exit codes so that problems with this library are more +# easily tracked down. +SHELL_LIB_INTERNAL_ERROR=86 +SHELL_LIB_THROWN_ERROR=74 +SHELL_LIB_USAGE_ERROR=99 + +# old -> new variable names +if [ -z "$DEBUG_XORG_PACKAGE" ] && [ -n "$DEBUG_XFREE86_PACKAGE" ]; then + DEBUG_XORG_PACKAGE="$DEBUG_XFREE86_PACKAGE" +fi +if [ -z "$DEBUG_XORG_DEBCONF" ] && [ -n "$DEBUG_XFREE86_DEBCONF" ]; then + DEBUG_XORG_DEBCONF="$DEBUG_XFREE86_DEBCONF" +fi + +# initial sanity checks +if [ -z "$THIS_PACKAGE" ]; then + cat >&2 < on the World Wide Web for +instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the +"doc-debian" package, or install the "reportbug" package and use the command of +the same name to file a report against version $SOURCE_VERSION of this package. +EOF + exit $SHELL_LIB_USAGE_ERROR +fi + +if [ -z "$THIS_SCRIPT" ]; then + cat >&2 < on the World Wide Web for +instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the +"doc-debian" package, or install the "reportbug" package and use the command of +the same name to file a report against version $SOURCE_VERSION of the +"$THIS_PACKAGE" package. +EOF + exit $SHELL_LIB_USAGE_ERROR +fi + +if [ "$1" = "reconfigure" ] || [ -n "$DEBCONF_RECONFIGURE" ]; then + RECONFIGURE="true" +else + RECONFIGURE= +fi + +if ([ "$1" = "install" ] || [ "$1" = "configure" ]) && [ -z "$2" ]; then + FIRSTINST="yes" +fi + +if [ -z "$RECONFIGURE" ] && [ -z "$FIRSTINST" ]; then + UPGRADE="yes" +fi + +trap "message;\ + message \"Received signal. Aborting $THIS_PACKAGE package $THIS_SCRIPT script.\";\ + message;\ + exit 1" HUP INT QUIT TERM + +reject_nondigits () { + # syntax: reject_nondigits [ operand ... ] + # + # scan operands (typically shell variables whose values cannot be trusted) for + # characters other than decimal digits and barf if any are found + while [ -n "$1" ]; do + # does the operand contain anything but digits? + if ! expr "$1" : "[[:digit:]]\+$" > /dev/null 2>&1; then + # can't use die(), because it wraps message() which wraps this function + echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_nondigits() encountered" \ + "possibly malicious garbage \"$1\"" >&2 + exit $SHELL_LIB_THROWN_ERROR + fi + shift + done +} + +reject_unlikely_path_chars () { + # syntax: reject_unlikely_path_chars [ operand ... ] + # + # scan operands (typically shell variables whose values cannot be trusted) for + # characters unlikely to be seen in a path and which the shell might + # interpret and barf if any are found + while [ -n "$1" ]; do + # does the operand contain any funny characters? + if expr "$1" : '.*[!$&()*;<>?|].*' > /dev/null 2>&1; then + # can't use die(), because I want to avoid forward references + echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_unlikely_path_chars()" \ + "encountered possibly malicious garbage \"$1\"" >&2 + exit $SHELL_LIB_THROWN_ERROR + fi + shift + done +} + +# Query the terminal to establish a default number of columns to use for +# displaying messages to the user. This is used only as a fallback in the +# event the COLUMNS variable is not set. ($COLUMNS can react to SIGWINCH while +# the script is running, and this cannot, only being calculated once.) +DEFCOLUMNS=$(stty size 2> /dev/null | awk '{print $2}') || true +if ! expr "$DEFCOLUMNS" : "[[:digit:]]\+$" > /dev/null 2>&1; then + DEFCOLUMNS=80 +fi + +message () { + # pretty-print messages of arbitrary length + reject_nondigits "$COLUMNS" + echo "$*" | fmt -t -w ${COLUMNS:-$DEFCOLUMNS} >&2 +} + +observe () { + # syntax: observe message ... + # + # issue observational message suitable for logging someday when support for + # it exists in dpkg + if [ -n "$DEBUG_XORG_PACKAGE" ]; then + message "$THIS_PACKAGE $THIS_SCRIPT note: $*" + fi +} + +warn () { + # syntax: warn message ... + # + # issue warning message suitable for logging someday when support for + # it exists in dpkg; also send to standard error + message "$THIS_PACKAGE $THIS_SCRIPT warning: $*" +} + +die () { + # syntax: die message ... + # + # exit script with error message + message "$THIS_PACKAGE $THIS_SCRIPT error: $*" + exit $SHELL_LIB_THROWN_ERROR +} + +internal_error () { + # exit script with error; essentially a "THIS SHOULD NEVER HAPPEN" message + message "internal error: $*" + if [ -n "$OFFICIAL_BUILD" ]; then + message "Please report a bug in the $THIS_SCRIPT script of the" \ + "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \ + "Tracking System. Include all messages above that mention the" \ + "$THIS_PACKAGE package. Visit " \ + " on the World Wide Web for" \ + "instructions, read the file" \ + "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \ + "package, or install the reportbug package and use the command of" \ + "the same name to file a report." + fi + exit $SHELL_LIB_INTERNAL_ERROR +} + +usage_error () { + message "usage error: $*" + message "Please report a bug in the $THIS_SCRIPT script of the" \ + "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \ + "Tracking System. Include all messages above that mention the" \ + "$THIS_PACKAGE package. Visit " \ + " on the World Wide Web for" \ + "instructions, read the file" \ + "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \ + "package, or install the reportbug package and use the command of" \ + "the same name to file a report." + exit $SHELL_LIB_USAGE_ERROR +} + +font_update () { + # run $UPDATECMDS in $FONTDIRS + + local dir cmd shortcmd x_font_dir_prefix + + x_font_dir_prefix="/usr/share/fonts/X11" + + if [ -z "$UPDATECMDS" ]; then + usage_error "font_update() called but \$UPDATECMDS not set" + fi + if [ -z "$FONTDIRS" ]; then + usage_error "font_update() called but \$FONTDIRS not set" + fi + + reject_unlikely_path_chars "$UPDATECMDS" + reject_unlikely_path_chars "$FONTDIRS" + + for dir in $FONTDIRS; do + if [ -d "$x_font_dir_prefix/$dir" ]; then + for cmd in $UPDATECMDS; do + if which "$cmd" > /dev/null 2>&1; then + shortcmd=${cmd##*/} + observe "running $shortcmd in $dir font directory" + cmd_opts= + if [ "$shortcmd" = "update-fonts-alias" ]; then + cmd_opts=--x11r7-layout + fi + if [ "$shortcmd" = "update-fonts-dir" ]; then + cmd_opts=--x11r7-layout + fi + if [ "$shortcmd" = "update-fonts-scale" ]; then + cmd_opts=--x11r7-layout + fi + $cmd $cmd_opts $dir || warn "$cmd $cmd_opts $dir" \ + "failed; font directory data may not" \ + "be up to date" + else + warn "$cmd not found; not updating corresponding $dir font" \ + "directory data" + fi + done + else + warn "$dir is not a directory; not updating font directory data" + fi + done +} + +remove_conffile_prepare () { + # syntax: remove_conffile_prepare filename official_md5sum ... + # + # Check a conffile "filename" against a list of canonical MD5 checksums. + # If the file's current MD5 checksum matches one of the "official_md5sum" + # operands provided, then prepare the conffile for removal from the system. + # We defer actual deletion until the package is configured so that we can + # roll this operation back if package installation fails. + # + # Call this function from a preinst script in the event $1 is "upgrade" or + # "install" and verify $2 to ensure the package is being upgraded from a + # version (or installed over a version removed-but-not-purged) prior to the + # one in which the conffile was obsoleted. + + local conffile current_checksum + + # validate arguments + if [ $# -lt 2 ]; then + usage_error "remove_conffile_prepare() called with wrong number of" \ + "arguments; expected at least 2, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + conffile="$1" + shift + + # does the conffile even exist? + if [ -e "$conffile" ]; then + # calculate its checksum + current_checksum=$(md5sum < "$conffile" | sed 's/[[:space:]].*//') + # compare it to each supplied checksum + while [ -n "$1" ]; do + if [ "$current_checksum" = "$1" ]; then + # we found a match; move the confffile and stop looking + observe "preparing obsolete conffile $conffile for removal" + mv "$conffile" "$conffile.$THIS_PACKAGE-tmp" + break + fi + shift + done + fi +} + +remove_conffile_lookup () { + # syntax: remove_conffile_lookup package filename + # + # Lookup the md5sum of a conffile in dpkg's database, and prepare for removal + # if it matches the actual file's md5sum. + # + # Call this function when you would call remove_conffile_prepare but only + # want to check against dpkg's status database instead of known checksums. + + local package conffile old_md5sum + + # validate arguments + if [ $# -ne 2 ]; then + usage_error "remove_conffile_lookup() called with wrong number of" \ + "arguments; expected 1, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + package="$1" + conffile="$2" + + if ! [ -e "$conffile" ]; then + return + fi + old_md5sum="$(dpkg-query -W -f='${Conffiles}' "$package" | \ + awk '{ if (match($0, "^ '"$conffile"' ")) print $2}')" + if [ -n "$old_md5sum" ]; then + remove_conffile_prepare "$conffile" "$old_md5sum" + fi +} + +remove_conffile_commit () { + # syntax: remove_conffile_commit filename + # + # Complete the removal of a conffile "filename" that has become obsolete. + # + # Call this function from a postinst script after having used + # remove_conffile_prepare() in the preinst. + + local conffile + + # validate arguments + if [ $# -ne 1 ]; then + usage_error "remove_conffile_commit() called with wrong number of" \ + "arguments; expected 1, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + conffile="$1" + + # if the temporary file created by remove_conffile_prepare() exists, remove it + if [ -e "$conffile.$THIS_PACKAGE-tmp" ]; then + observe "committing removal of obsolete conffile $conffile" + rm "$conffile.$THIS_PACKAGE-tmp" + fi +} + +remove_conffile_rollback () { + # syntax: remove_conffile_rollback filename + # + # Roll back the removal of a conffile "filename". + # + # Call this function from a postrm script in the event $1 is "abort-upgrade" + # or "abort-install" is after having used remove_conffile_prepare() in the + # preinst. + + local conffile + + # validate arguments + if [ $# -ne 1 ]; then + usage_error "remove_conffile_rollback() called with wrong number of" \ + "arguments; expected 1, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + conffile="$1" + + # if the temporary file created by remove_conffile_prepare() exists, move it + # back + if [ -e "$conffile.$THIS_PACKAGE-tmp" ]; then + observe "rolling back removal of obsolete conffile $conffile" + mv "$conffile.$THIS_PACKAGE-tmp" "$conffile" + fi +} + +replace_conffile_with_symlink_prepare () { + # syntax: replace_conffile_with_symlink_prepare oldfilename newfilename \ + # official_md5sum ... + # + # Check a conffile "oldfilename" against a list of canonical MD5 checksums. + # If the file's current MD5 checksum matches one of the "official_md5sum" + # operands provided, then prepare the conffile for removal from the system. + # We defer actual deletion until the package is configured so that we can + # roll this operation back if package installation fails. Otherwise copy it + # to newfilename and let dpkg handle it through conffiles mechanism. + # + # Call this function from a preinst script in the event $1 is "upgrade" or + # "install" and verify $2 to ensure the package is being upgraded from a + # version (or installed over a version removed-but-not-purged) prior to the + # one in which the conffile was obsoleted. + + local conffile current_checksum + + # validate arguments + if [ $# -lt 3 ]; then + usage_error "replace_conffile_with_symlink_prepare() called with wrong" \ + " number of arguments; expected at least 3, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + oldconffile="$1" + shift + newconffile="$1" + shift + + remove_conffile_prepare "$_oldconffile" "$@" + # If $oldconffile still exists, then md5sums didn't match. + # Copy it to new one. + if [ -f "$oldconffile" ]; then + cp "$oldconffile" "$newconffile" + fi + +} + +replace_conffile_with_symlink_commit () { + # syntax: replace_conffile_with_symlink_commit oldfilename + # + # Complete the removal of a conffile "oldfilename" that has been + # replaced by a symlink. + # + # Call this function from a postinst script after having used + # replace_conffile_with_symlink_prepare() in the preinst. + + local conffile + + # validate arguments + if [ $# -ne 1 ]; then + usage_error "replace_conffile_with_symlink_commit() called with wrong" \ + "number of arguments; expected 1, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + conffile="$1" + + remove_conffile_commit "$conffile" +} + +replace_conffile_with_symlink_rollback () { + # syntax: replace_conffile_with_symlink_rollback oldfilename newfilename + # + # Roll back the replacing of a conffile "oldfilename" with symlink to + # "newfilename". + # + # Call this function from a postrm script in the event $1 is "abort-upgrade" + # or "abort-install" and verify $2 to ensure the package failed to upgrade + # from a version (or install over a version removed-but-not-purged) prior + # to the one in which the conffile was obsoleted. + # You should have used replace_conffile_with_symlink_prepare() in the + # preinst. + + local conffile + + # validate arguments + if [ $# -ne 2 ]; then + usage_error "replace_conffile_with_symlink_rollback() called with wrong" \ + "number of arguments; expected 2, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + oldconffile="$1" + newconffile="$2" + + remove_conffile_rollback "$_oldconffile" + if [ -f "$newconffile" ]; then + rm "$newconffile" + fi +} + +run () { + # syntax: run command [ argument ... ] + # + # Run specified command with optional arguments and report its exit status. + # Useful for commands whose exit status may be nonzero, but still acceptable, + # or commands whose failure is not fatal to us. + # + # NOTE: Do *not* use this function with db_get or db_metaget commands; in + # those cases the return value of the debconf command *must* be checked + # before the string returned by debconf is used for anything. + + local retval + + # validate arguments + if [ $# -lt 1 ]; then + usage_error "run() called with wrong number of arguments; expected at" \ + "least 1, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + "$@" || retval=$? + + if [ ${retval:-0} -ne 0 ]; then + observe "command \"$*\" exited with status $retval" + fi +} + +make_symlink_sane () { + # syntax: make_symlink_sane symlink target + # + # Ensure that the symbolic link symlink exists, and points to target. + # + # If symlink does not exist, create it and point it at target. + # + # If symlink exists but is not a symbolic link, back it up. + # + # If symlink exists, is a symbolic link, but points to the wrong location, fix + # it. + # + # If symlink exists, is a symbolic link, and already points to target, do + # nothing. + # + # This function wouldn't be needed if ln had an -I, --idempotent option. + + # Validate arguments. + if [ $# -ne 2 ]; then + usage_error "make_symlink_sane() called with wrong number of arguments;" \ + "expected 2, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + # We could just use the positional parameters as-is, but that makes things + # harder to follow. + local symlink target + + symlink="$1" + target="$2" + + if [ -L "$symlink" ] && [ "$(readlink "$symlink")" = "$target" ]; then + observe "link from $symlink to $target already exists" + else + observe "creating symbolic link from $symlink to $target" + mkdir -p "${target%/*}" "${symlink%/*}" + ln -s -b -S ".dpkg-old" "$target" "$symlink" + fi +} + +migrate_dir_to_symlink () { + # syntax: migrate_dir_to_symlink old_location new_location + # + # Per Debian Policy section 6.5.4, "A directory will never be replaced by a + # symbolic link to a directory or vice versa; instead, the existing state + # (symlink or not) will be left alone and dpkg will follow the symlink if + # there is one." + # + # We have to do it ourselves. + # + # This function moves the contents of old_location, a directory, into + # new_location, a directory, then makes old_location a symbolic link to + # new_location. + # + # old_location need not exist, but if it does, it must be a directory (or a + # symlink to a directory). If it is not, it is backed up. If new_location + # exists already and is not a directory, it is backed up. + # + # This function should be called from a package's preinst so that other + # packages unpacked after this one --- but before this package's postinst runs + # --- are unpacked into new_location even if their payloads contain + # old_location filespecs. + + # Validate arguments. + if [ $# -ne 2 ]; then + usage_error "migrate_dir_to_symlink() called with wrong number of" + "arguments; expected 2, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + # We could just use the positional parameters as-is, but that makes things + # harder to follow. + local new old + + old="$1" + new="$2" + + # Is old location a symlink? + if [ -L "$old" ]; then + # Does it already point to new location? + if [ "$(readlink "$old")" = "$new" ]; then + # Nothing to do; migration has already been done. + observe "migration of $old to $new already done" + return 0 + else + # Back it up. + warn "backing up symbolic link $old as $old.dpkg-old" + mv -b "$old" "$old.dpkg-old" + fi + fi + + # Does old location exist, but is not a directory? + if [ -e "$old" ] && ! [ -d "$old" ]; then + # Back it up. + warn "backing up non-directory $old as $old.dpkg-old" + mv -b "$old" "$old.dpkg-old" + fi + + observe "migrating $old to $new" + + # Is new location a symlink? + if [ -L "$new" ]; then + # Does it point the wrong way, i.e., back to where we're migrating from? + if [ "$(readlink "$new")" = "$old" ]; then + # Get rid of it. + observe "removing symbolic link $new which points to $old" + rm "$new" + else + # Back it up. + warn "backing up symbolic link $new as $new.dpkg-old" + mv -b "$new" "$new.dpkg-old" + fi + fi + + # Does new location exist, but is not a directory? + if [ -e "$new" ] && ! [ -d "$new" ]; then + warn "backing up non-directory $new as $new.dpkg-old" + mv -b "$new" "$new.dpkg-old" + fi + + # Create new directory if it does not yet exist. + if ! [ -e "$new" ]; then + observe "creating $new" + mkdir -p "$new" + fi + + # Copy files in old location to new location. Back up any filenames that + # already exist in the new location with the extension ".dpkg-old". + observe "copying files from $old to $new" + if ! (cd "$old" && cp -a -b -S ".dpkg-old" . "$new"); then + die "error(s) encountered while copying files from $old to $new" + fi + + # Remove files at old location. + observe "removing $old" + rm -r "$old" + + # Create symlink from old location to new location. + make_symlink_sane "$old" "$new" +} + +# vim:set ai et sw=2 ts=2 tw=80: + +# GOBSTOPPER: The X Strike Force shell library ends here.